diff options
Diffstat (limited to 'arch')
150 files changed, 5685 insertions, 2266 deletions
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 582a3519fb28..9903e3a79102 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -154,7 +154,7 @@ pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask) void * dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index 7cb23f12ecbd..c468e312e5f8 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -397,7 +397,7 @@ pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) { void *cpu_addr; long order = get_order(size); - int gfp = GFP_ATOMIC; + gfp_t gfp = GFP_ATOMIC; try_again: cpu_addr = (void *)__get_free_pages(gfp, order); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 11fff042aa81..682367bd0f65 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -204,6 +204,7 @@ config ARCH_H720X config ARCH_AAEC2000 bool "Agilent AAEC-2000 based" + select ARM_AMBA help This enables support for systems based on the Agilent AAEC-2000 @@ -687,7 +688,8 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ + || MACH_MP1000 source "drivers/ide/Kconfig" endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c7f475e213e..a54d2eb64892 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -39,7 +39,8 @@ defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) + defined(CONFIG_ARCH_OMAP) || \ + defined(CONFIG_MACH_MP1000) .macro loadsp, rb addruart \rb .endm diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index e8053d16829b..5cdb4122f057 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -550,15 +550,12 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) +static int locomo_suspend(struct device *dev, pm_message_t state) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; unsigned long flags; - if (level != SUSPEND_DISABLE) - return 0; - save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); if (!save) return -ENOMEM; @@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int locomo_resume(struct device *dev, u32 level) +static int locomo_resume(struct device *dev) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; unsigned long r; unsigned long flags; - if (level != RESUME_ENABLE) - return 0; - save = (struct locomo_save_data *) dev->power.saved_state; if (!save) return 0; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 1a47fbf9cbbc..21e2a518ad3a 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -801,7 +801,7 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1111_suspend(struct device *dev, pm_message_t state) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; @@ -809,9 +809,6 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) unsigned int val; void __iomem *base; - if (level != SUSPEND_DISABLE) - return 0; - save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; @@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) /* * sa1111_resume - Restore the SA1111 device state. * @dev: device to restore - * @level: resume level * * Restore the general state of the SA1111; clock control and * interrupt controller. Other parts of the SA1111 must be * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct device *dev, u32 level) +static int sa1111_resume(struct device *dev) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; - if (level != RESUME_ENABLE) - return 0; - save = (struct sa1111_save_data *)dev->power.saved_state; if (!save) return 0; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 9e5245c702de..e8356b76d7c6 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -102,26 +102,24 @@ static void check_scoop_reg(struct scoop_dev *sdev) } #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int scoop_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = dev_get_drvdata(dev); + + check_scoop_reg(sdev); + sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); + SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; - check_scoop_reg(sdev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); - SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; - } return 0; } -static int scoop_resume(struct device *dev, uint32_t level) +static int scoop_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = dev_get_drvdata(dev); + + check_scoop_reg(sdev); + SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; - check_scoop_reg(sdev); - SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; - } return 0; } #else diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig new file mode 100644 index 000000000000..d2cbc6fada1d --- /dev/null +++ b/arch/arm/configs/mp1000_defconfig @@ -0,0 +1,897 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc1 +# Fri Sep 16 15:48:13 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +CONFIG_ARCH_CLPS711X=y +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# CLPS711X/EP721X Implementations +# +# CONFIG_ARCH_AUTCPU12 is not set +# CONFIG_ARCH_CDB89712 is not set +# CONFIG_ARCH_CEIVA is not set +# CONFIG_ARCH_CLEP7312 is not set +# CONFIG_ARCH_EDB7211 is not set +# CONFIG_ARCH_P720T is not set +# CONFIG_ARCH_FORTUNET is not set +CONFIG_MACH_MP1000=y +CONFIG_MP1000_90MHZ=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM720T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_LV4T=y +CONFIG_CPU_CACHE_V4=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WT=y +CONFIG_CPU_TLB_V4WT=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=m +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0x4000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_EDB7312=m +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_MP1000=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +CONFIG_IDE_ARM=y +CONFIG_BLK_DEV_IDE_MP1000=y +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_CS89x0=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CLPS711X=y +CONFIG_SERIAL_CLPS711X_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_NVRAM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_WAITQ=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_CLPS711X_UART2 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 1a85cfdad5ac..6055e1427ba3 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -11,6 +11,7 @@ */ #include <linux/config.h> #include <linux/module.h> +#include <linux/moduleloader.h> #include <linux/kernel.h> #include <linux/elf.h> #include <linux/vmalloc.h> diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f6de76e0a45d..baa09601a64e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -345,7 +345,9 @@ static int bad_syscall(int n, struct pt_regs *regs) struct thread_info *thread = current_thread_info(); siginfo_t info; - if (current->personality != PER_LINUX && thread->exec_domain->handler) { + if (current->personality != PER_LINUX && + current->personality != PER_LINUX_32BIT && + thread->exec_domain->handler) { thread->exec_domain->handler(n, regs); return regs->ARM_r0; } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 8725d63e4219..71e5b99e519e 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strnlen_user.o strchr.o strrchr.o testchangebit.o \ testclearbit.o testsetbit.o uaccess.o getuser.o \ putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o lib1funcs.o div64.o \ + ucmpdi2.o lib1funcs.o div64.o sha1.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S new file mode 100644 index 000000000000..ff6ece487ffc --- /dev/null +++ b/arch/arm/lib/sha1.S @@ -0,0 +1,206 @@ +/* + * linux/arch/arm/lib/sha1.S + * + * SHA transform optimized for ARM + * + * Copyright: (C) 2005 by Nicolas Pitre <nico@cam.org> + * Created: September 17, 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The reference implementation for this code is linux/lib/sha1.c + */ + +#include <linux/linkage.h> + + .text + + +/* + * void sha_transform(__u32 *digest, const char *in, __u32 *W) + * + * Note: the "in" ptr may be unaligned. + */ + +ENTRY(sha_transform) + + stmfd sp!, {r4 - r8, lr} + + @ for (i = 0; i < 16; i++) + @ W[i] = be32_to_cpu(in[i]); */ + +#ifdef __ARMEB__ + mov r4, r0 + mov r0, r2 + mov r2, #64 + bl memcpy + mov r2, r0 + mov r0, r4 +#else + mov r3, r2 + mov lr, #16 +1: ldrb r4, [r1], #1 + ldrb r5, [r1], #1 + ldrb r6, [r1], #1 + ldrb r7, [r1], #1 + subs lr, lr, #1 + orr r5, r5, r4, lsl #8 + orr r6, r6, r5, lsl #8 + orr r7, r7, r6, lsl #8 + str r7, [r3], #4 + bne 1b +#endif + + @ for (i = 0; i < 64; i++) + @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31); + + sub r3, r2, #4 + mov lr, #64 +2: ldr r4, [r3, #4]! + subs lr, lr, #1 + ldr r5, [r3, #8] + ldr r6, [r3, #32] + ldr r7, [r3, #52] + eor r4, r4, r5 + eor r4, r4, r6 + eor r4, r4, r7 + mov r4, r4, ror #31 + str r4, [r3, #64] + bne 2b + + /* + * The SHA functions are: + * + * f1(B,C,D) = (D ^ (B & (C ^ D))) + * f2(B,C,D) = (B ^ C ^ D) + * f3(B,C,D) = ((B & C) | (D & (B | C))) + * + * Then the sub-blocks are processed as follows: + * + * A' = ror(A, 27) + f(B,C,D) + E + K + *W++ + * B' = A + * C' = ror(B, 2) + * D' = C + * E' = D + * + * We therefore unroll each loop 5 times to avoid register shuffling. + * Also the ror for C (and also D and E which are successivelyderived + * from it) is applied in place to cut on an additional mov insn for + * each round. + */ + + .macro sha_f1, A, B, C, D, E + ldr r3, [r2], #4 + eor ip, \C, \D + add \E, r1, \E, ror #2 + and ip, \B, ip, ror #2 + add \E, \E, \A, ror #27 + eor ip, ip, \D, ror #2 + add \E, \E, r3 + add \E, \E, ip + .endm + + .macro sha_f2, A, B, C, D, E + ldr r3, [r2], #4 + add \E, r1, \E, ror #2 + eor ip, \B, \C, ror #2 + add \E, \E, \A, ror #27 + eor ip, ip, \D, ror #2 + add \E, \E, r3 + add \E, \E, ip + .endm + + .macro sha_f3, A, B, C, D, E + ldr r3, [r2], #4 + add \E, r1, \E, ror #2 + orr ip, \B, \C, ror #2 + add \E, \E, \A, ror #27 + and ip, ip, \D, ror #2 + add \E, \E, r3 + and r3, \B, \C, ror #2 + orr ip, ip, r3 + add \E, \E, ip + .endm + + ldmia r0, {r4 - r8} + + mov lr, #4 + ldr r1, .L_sha_K + 0 + + /* adjust initial values */ + mov r6, r6, ror #30 + mov r7, r7, ror #30 + mov r8, r8, ror #30 + +3: subs lr, lr, #1 + sha_f1 r4, r5, r6, r7, r8 + sha_f1 r8, r4, r5, r6, r7 + sha_f1 r7, r8, r4, r5, r6 + sha_f1 r6, r7, r8, r4, r5 + sha_f1 r5, r6, r7, r8, r4 + bne 3b + + ldr r1, .L_sha_K + 4 + mov lr, #4 + +4: subs lr, lr, #1 + sha_f2 r4, r5, r6, r7, r8 + sha_f2 r8, r4, r5, r6, r7 + sha_f2 r7, r8, r4, r5, r6 + sha_f2 r6, r7, r8, r4, r5 + sha_f2 r5, r6, r7, r8, r4 + bne 4b + + ldr r1, .L_sha_K + 8 + mov lr, #4 + +5: subs lr, lr, #1 + sha_f3 r4, r5, r6, r7, r8 + sha_f3 r8, r4, r5, r6, r7 + sha_f3 r7, r8, r4, r5, r6 + sha_f3 r6, r7, r8, r4, r5 + sha_f3 r5, r6, r7, r8, r4 + bne 5b + + ldr r1, .L_sha_K + 12 + mov lr, #4 + +6: subs lr, lr, #1 + sha_f2 r4, r5, r6, r7, r8 + sha_f2 r8, r4, r5, r6, r7 + sha_f2 r7, r8, r4, r5, r6 + sha_f2 r6, r7, r8, r4, r5 + sha_f2 r5, r6, r7, r8, r4 + bne 6b + + ldmia r0, {r1, r2, r3, ip, lr} + add r4, r1, r4 + add r5, r2, r5 + add r6, r3, r6, ror #2 + add r7, ip, r7, ror #2 + add r8, lr, r8, ror #2 + stmia r0, {r4 - r8} + + ldmfd sp!, {r4 - r8, pc} + +.L_sha_K: + .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 + + +/* + * void sha_init(__u32 *buf) + */ + +.L_sha_initial_digest: + .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0 + +ENTRY(sha_init) + + str lr, [sp, #-4]! + adr r1, .L_sha_initial_digest + ldmia r1, {r1, r2, r3, ip, lr} + stmia r0, {r1, r2, r3, ip, lr} + ldr pc, [sp], #4 + diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile index 20ec83896c37..a8e462f58bc9 100644 --- a/arch/arm/mach-aaec2000/Makefile +++ b/arch/arm/mach-aaec2000/Makefile @@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += core.o +obj-y += core.o clock.o # Specific board support obj-$(CONFIG_MACH_AAED2000) += aaed2000.o diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index c9d899886648..f5ef69702296 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -27,16 +27,65 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/arch/aaed2000.h> + #include "core.h" +static void aaed2000_clcd_disable(struct clcd_fb *fb) +{ + AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN; +} + +static void aaed2000_clcd_enable(struct clcd_fb *fb) +{ + AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN; +} + +struct aaec2000_clcd_info clcd_info = { + .enable = aaed2000_clcd_enable, + .disable = aaed2000_clcd_disable, + .panel = { + .mode = { + .name = "Sharp", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 20, + .right_margin = 44, + .upper_margin = 21, + .lower_margin = 34, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS, + .cntl = CNTL_LCDTFT, + .bpp = 16, + }, +}; + static void __init aaed2000_init_irq(void) { aaec2000_init_irq(); } +static void __init aaed2000_init(void) +{ + aaec2000_set_clcd_plat_data(&clcd_info); +} + +static struct map_desc aaed2000_io_desc[] __initdata = { + { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */ +}; + static void __init aaed2000_map_io(void) { aaec2000_map_io(); + iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc)); } MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") @@ -47,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") .map_io = aaed2000_map_io, .init_irq = aaed2000_init_irq, .timer = &aaec2000_timer, + .init_machine = aaed2000_init, MACHINE_END diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c new file mode 100644 index 000000000000..99e019169dda --- /dev/null +++ b/arch/arm/mach-aaec2000/clock.c @@ -0,0 +1,110 @@ +/* + * linux/arch/arm/mach-aaec2000/clock.c + * + * Copyright (C) 2005 Nicolas Bellido Y Ortega + * + * Based on linux/arch/arm/mach-integrator/clock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <asm/semaphore.h> +#include <asm/hardware/clock.h> + +#include "clock.h" + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +int clk_use(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_use); + +void clk_unuse(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_unuse); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h new file mode 100644 index 000000000000..d4bb74ff613f --- /dev/null +++ b/arch/arm/mach-aaec2000/clock.h @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-aaec2000/clock.h + * + * Copyright (C) 2005 Nicolas Bellido Y Ortega + * + * Based on linux/arch/arm/mach-integrator/clock.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct module; + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + void *data; +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index aece0cd4f0a3..0c53dab80905 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -13,19 +13,27 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/device.h> #include <linux/list.h> #include <linux/errno.h> +#include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/timex.h> #include <linux/signal.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> +#include <asm/hardware/amba.h> +#include <asm/mach/flash.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include "core.h" +#include "clock.h" + /* * Common I/O mapping: * @@ -40,9 +48,17 @@ * default mapping provided here. */ static struct map_desc standard_io_desc[] __initdata = { - /* virtual physical length type */ - { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE }, - { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE } + { + .virtual = VIO_APB_BASE, + .physical = __phys_to_pfn(PIO_APB_BASE), + .length = IO_APB_LENGTH, + .type = MT_DEVICE + }, { + .virtual = VIO_AHB_BASE, + .physical = __phys_to_pfn(PIO_AHB_BASE), + .length = IO_AHB_LENGTH, + .type = MT_DEVICE + } }; void __init aaec2000_map_io(void) @@ -155,3 +171,116 @@ struct sys_timer aaec2000_timer = { .offset = aaec2000_gettimeoffset, }; +static struct clcd_panel mach_clcd_panel; + +static int aaec2000_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = &mach_clcd_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M, + &dma, GFP_KERNEL); + + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = SZ_1M; + + return 0; +} + +static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void aaec2000_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board clcd_plat_data = { + .name = "AAEC-2000", + .check = clcdfb_check, + .decode = clcdfb_decode, + .setup = aaec2000_clcd_setup, + .mmap = aaec2000_clcd_mmap, + .remove = aaec2000_clcd_remove, +}; + +static struct amba_device clcd_device = { + .dev = { + .bus_id = "mb:16", + .coherent_dma_mask = ~0, + .platform_data = &clcd_plat_data, + }, + .res = { + .start = AAEC_CLCD_PHYS, + .end = AAEC_CLCD_PHYS + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { INT_LCD, NO_IRQ }, + .periphid = 0x41110, +}; + +static struct amba_device *amba_devs[] __initdata = { + &clcd_device, +}; + +static struct clk aaec2000_clcd_clk = { + .name = "CLCDCLK", +}; + +void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd) +{ + clcd_plat_data.enable = clcd->enable; + clcd_plat_data.disable = clcd->disable; + memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel)); +} + +static struct flash_platform_data aaec2000_flash_data = { + .map_name = "cfi_probe", + .width = 4, +}; + +static struct resource aaec2000_flash_resource = { + .start = AAEC_FLASH_BASE, + .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device aaec2000_flash_device = { + .name = "armflash", + .id = 0, + .dev = { + .platform_data = &aaec2000_flash_data, + }, + .num_resources = 1, + .resource = &aaec2000_flash_resource, +}; + +static int __init aaec2000_init(void) +{ + int i; + + clk_register(&aaec2000_clcd_clk); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + + platform_device_register(&aaec2000_flash_device); + + return 0; +}; +arch_initcall(aaec2000_init); + diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h index 91893d848c16..daefc0ea14a1 100644 --- a/arch/arm/mach-aaec2000/core.h +++ b/arch/arm/mach-aaec2000/core.h @@ -9,8 +9,19 @@ * */ +#include <asm/hardware/amba_clcd.h> + struct sys_timer; extern struct sys_timer aaec2000_timer; extern void __init aaec2000_map_io(void); extern void __init aaec2000_init_irq(void); + +struct aaec2000_clcd_info { + struct clcd_panel panel; + void (*disable)(struct clcd_fb *); + void (*enable)(struct clcd_fb *); +}; + +extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *); + diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0793dcf54f2e..d5c155045762 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -69,6 +69,17 @@ config EP72XX_ROM_BOOT You almost surely want to say N here. +config MACH_MP1000 + bool "MACH_MP1000" + help + Say Y if you intend to run the kernel on the Comdial MP1000 platform. + +config MP1000_90MHZ + bool "MP1000_90MHZ" + depends on MACH_MP1000 + help + Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ + endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 4a197315f0cf..8a6dc1ccf8fe 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o +obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o obj-$(CONFIG_ARCH_P720T) += p720t.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index dc73feb1ffb0..43b9423d1440 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -46,10 +46,14 @@ */ static struct map_desc autcpu12_io_desc[] __initdata = { - /* virtual, physical, length, type */ - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE } + /* memory-mapped extra io and CS8900A Ethernet chip */ + /* ethernet chip */ + { + .virtual = AUTCPU12_VIRT_CS8900A, + .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), + .length = SZ_1M, + .type = MT_DEVICE + } }; void __init autcpu12_map_io(void) diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index a46c82cd2711..cba7be5a06c3 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -39,7 +39,12 @@ * ethernet driver, perhaps. */ static struct map_desc cdb89712_io_desc[] __initdata = { - { ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE } + { + .virtual = ETHER_BASE, + .pfn =__phys_to_pfn(ETHER_START), + .length = ETHER_SIZE, + .type = MT_DEVICE + } }; static void __init cdb89712_map_io(void) diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index 780d91805984..35d51a759b59 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -37,11 +37,13 @@ #include "common.h" static struct map_desc ceiva_io_desc[] __initdata = { - /* virtual, physical, length, type */ - - /* SED1355 controlled video RAM & registers */ - { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE } - + /* SED1355 controlled video RAM & registers */ + { + .virtual = CEIVA_VIRT_SED1355, + .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355), + .length = SZ_2M, + .type = MT_DEVICE + } }; diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 7fd7b01822d0..72f8bb05d55e 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -51,15 +51,27 @@ extern void clps711x_map_io(void); * happens). */ static struct map_desc edb7211_io_desc[] __initdata = { - /* virtual, physical, length, type */ - - /* memory-mapped extra keyboard row and CS8900A Ethernet chip */ - { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, SZ_1M, MT_DEVICE }, - { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE }, - - /* flash banks */ - { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, SZ_8M, MT_DEVICE }, - { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, SZ_8M, MT_DEVICE } + { /* memory-mapped extra keyboard row */ + .virtual = EP7211_VIRT_EXTKBD, + .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .length = SZ_1M, + .type - MT_DEVICE + }, { /* and CS8900A Ethernet chip */ + .virtual = EP7211_VIRT_CS8900A, + .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), + .length = SZ_1M, + .type = MT_DEVICE + }, { /* flash banks */ + .virtual = EP7211_VIRT_FLASH1, + .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), + .length = SZ_8M, + .type = MT_DEVICE + }, { + .virtual = EP7211_VIRT_FLASH2, + .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), + .length = SZ_8M, + .type = MT_DEVICE + } }; void __init edb7211_map_io(void) diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c index 120b7cac84b5..a00f77ef8df8 100644 --- a/arch/arm/mach-clps711x/mm.c +++ b/arch/arm/mach-clps711x/mm.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/bootmem.h> +#include <asm/sizes.h> #include <asm/hardware.h> #include <asm/pgtable.h> #include <asm/page.h> @@ -34,7 +35,12 @@ * This maps the generic CLPS711x registers */ static struct map_desc clps711x_io_desc[] __initdata = { - { CLPS7111_VIRT_BASE, CLPS7111_PHYS_BASE, 1048576, MT_DEVICE } + { + .virtual = CLPS7111_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE), + .length = SZ_1M, + .type = MT_DEVICE + } }; void __init clps711x_map_io(void) diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c new file mode 100644 index 000000000000..c2816bcde5e7 --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-mach.c @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/mach-mp1000/mp1000.c + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/arch/mp1000-seprom.h> + +#include "common.h" + +extern void mp1000_map_io(void); + +static void __init mp1000_init(void) +{ + seprom_init(); +} + +MACHINE_START(MP1000, "Comdial MP1000") + /* Maintainer: Jon Ringle */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0015100, + .map_io = mp1000_map_io, + .init_irq = clps711x_init_irq, + .init_machine = mp1000_init, + .timer = &clps711x_timer, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c new file mode 100644 index 000000000000..20e810b0ec0c --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-mm.c @@ -0,0 +1,47 @@ +/* + * linux/arch/arm/mach-mp1000/mm.c + * + * Extra MM routines for the MP1000 + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/sizes.h> + +#include <asm/mach/map.h> + +extern void clps711x_map_io(void); + +static struct map_desc mp1000_io_desc[] __initdata = { + { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE }, + { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE }, + { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE }, + { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE }, + { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE }, + { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE } +}; + +void __init mp1000_map_io(void) +{ + clps711x_map_io(); + iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc)); +} diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c new file mode 100644 index 000000000000..b22d0bebb851 --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-seprom.c @@ -0,0 +1,195 @@ +/*` + * mp1000-seprom.c + * + * This file contains the Serial EEPROM code for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/hardware.h> +#include <asm/hardware/clps7111.h> +#include <asm/arch/mp1000-seprom.h> + +/* If SepromInit() can initialize and checksum the seprom successfully, */ +/* then it will point seprom_data_ptr at the shadow copy. */ + +static eeprom_struct seprom_data; /* shadow copy of seprom content */ + +eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */ + +/* + * Port D Bit 5 is Chip Select for EEPROM + * Port E Bit 0 is Input, Data out from EEPROM + * Port E Bit 1 is Output, Data in to EEPROM + * Port E Bit 2 is Output, CLK to EEPROM + */ + +static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR); +static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR); + +#define NO_OF_SHORTS 64 // Device is 64 x 16 bits +#define ENABLE_RW 0 +#define DISABLE_RW 1 + +static inline void toggle_seprom_clock(void) +{ + *port_e_ptr |= HwPortESepromCLK; + *port_e_ptr &= ~(HwPortESepromCLK); +} + +static inline void select_eeprom(void) +{ + *port_d_ptr |= HwPortDEECS; + *port_e_ptr &= ~(HwPortESepromCLK); +} + +static inline void deselect_eeprom(void) +{ + *port_d_ptr &= ~(HwPortDEECS); + *port_e_ptr &= ~(HwPortESepromDIn); +} + +/* + * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom + * and returns 0 if seprom is not initialized or + * has a checksum error. + */ + +eeprom_struct* get_seprom_ptr(void) +{ + return seprom_data_ptr; +} + +unsigned char* get_eeprom_mac_address(void) +{ + return seprom_data_ptr->variant.eprom_struct.mac_Address; +} + +/* + * ReadSProm, Physically reads data from the Serial PROM + */ +static void read_sprom(short address, int length, eeprom_struct *buffer) +{ + short data = COMMAND_READ | (address & 0x3F); + short bit; + int i; + + select_eeprom(); + + // Clock in 9 bits of the command + for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) { + if (data & bit) + *port_e_ptr |= HwPortESepromDIn; + else + *port_e_ptr &= ~(HwPortESepromDIn); + + toggle_seprom_clock(); + } + + // + // Now read one or more shorts of data from the Seprom + // + while (length-- > 0) { + data = 0; + + // Read 16 bits at a time + for (i = 0; i < 16; i++) { + data <<= 1; + toggle_seprom_clock(); + data |= *port_e_ptr & HwPortESepromDOut; + + } + + buffer->variant.eprom_short_data[address++] = data; + } + + deselect_eeprom(); + + return; +} + + + +/* + * ReadSerialPROM + * + * Input: Pointer to array of 64 x 16 Bits + * + * Output: if no problem reading data is filled in + */ +static void read_serial_prom(eeprom_struct *data) +{ + read_sprom(0, 64, data); +} + + +// +// Compute Serial EEPROM checksum +// +// Input: Pointer to struct with Eprom data +// +// Output: The computed Eprom checksum +// +static short compute_seprom_checksum(eeprom_struct *data) +{ + short checksum = 0; + int i; + + for (i = 0; i < 126; i++) { + checksum += (short)data->variant.eprom_byte_data[i]; + } + + return((short)(0x5555 - (checksum & 0xFFFF))); +} + +// +// Make sure the data port bits for the SEPROM are correctly initialised +// + +void __init seprom_init(void) +{ + short checksum; + + // Init Port D + *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0; + *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15; + + // Init Port E + *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06; + *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04; + + // + // Make sure that EEPROM struct size never exceeds 128 bytes + // + if (sizeof(eeprom_struct) > 128) { + panic("Serial PROM struct size > 128, aborting read\n"); + } + + read_serial_prom(&seprom_data); + + checksum = compute_seprom_checksum(&seprom_data); + + if (checksum != seprom_data.variant.eprom_short_data[63]) { + panic("Serial EEPROM checksum failed\n"); + } + + seprom_data_ptr = &seprom_data; +} + diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 5bdb90edf992..a1acb945fb51 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -29,6 +29,7 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/setup.h> +#include <asm/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,8 +43,17 @@ * We map both here. */ static struct map_desc p720t_io_desc[] __initdata = { - { SYSPLD_VIRT_BASE, SYSPLD_PHYS_BASE, 1048576, MT_DEVICE }, - { 0xfe400000, 0x10400000, 1048576, MT_DEVICE } + { + .virtual = SYSPLD_VIRT_BASE, + .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = 0xfe400000, + .pfn = __phys_to_pfn(0x10400000), + .length = SZ_1M, + .type = MT_DEVICE + } }; static void __init diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index e216ab8b9e8f..0364ba4b539e 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -259,10 +259,27 @@ static void __init clps7500_init_irq(void) } static struct map_desc cl7500_io_desc[] __initdata = { - { IO_BASE, IO_START, IO_SIZE, MT_DEVICE }, /* IO space */ - { ISA_BASE, ISA_START, ISA_SIZE, MT_DEVICE }, /* ISA space */ - { FLASH_BASE, FLASH_START, FLASH_SIZE, MT_DEVICE }, /* Flash */ - { LED_BASE, LED_START, LED_SIZE, MT_DEVICE } /* LED */ + { /* IO space */ + .virtual = IO_BASE, + .pfn = __phys_to_pfn(IO_START), + .length = IO_SIZE, + .type = MT_DEVICE + }, { /* ISA space */ + .virtual = ISA_BASE, + .pfn = __phys_to_pfn(ISA_START), + .length = ISA_SIZE, + .type = MT_DEVICE + }, { /* Flash */ + .virtual = FLASH_BASE, + .pfn = __phys_to_pfn(FLASH_START), + .length = FLASH_SIZE, + .type = MT_DEVICE + }, { /* LED */ + .virtual = LED_BASE, + .pfn = __phys_to_pfn(LED_START), + .length = LED_SIZE, + .type = MT_DEVICE + } }; static void __init clps7500_map_io(void) diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 5aeadfd72143..15261646dcdd 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -76,16 +76,42 @@ static struct map_desc ebsa110_io_desc[] __initdata = { /* * sparse external-decode ISAIO space */ - { IRQ_STAT, TRICK4_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */ - { IRQ_MASK, TRICK3_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */ - { SOFT_BASE, TRICK1_PHYS, PGDIR_SIZE, MT_DEVICE }, /* SOFT_BASE */ - { PIT_BASE, TRICK0_PHYS, PGDIR_SIZE, MT_DEVICE }, /* PIT_BASE */ + { /* IRQ_STAT/IRQ_MCLR */ + .virtual = IRQ_STAT, + .pfn = __phys_to_pfn(TRICK4_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, { /* IRQ_MASK/IRQ_MSET */ + .virtual = IRQ_MASK, + .pfn = __phys_to_pfn(TRICK3_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, { /* SOFT_BASE */ + .virtual = SOFT_BASE, + .pfn = __phys_to_pfn(TRICK1_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, { /* PIT_BASE */ + .virtual = PIT_BASE, + .pfn = __phys_to_pfn(TRICK0_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, /* * self-decode ISAIO space */ - { ISAIO_BASE, ISAIO_PHYS, ISAIO_SIZE, MT_DEVICE }, - { ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE } + { + .virtual = ISAIO_BASE, + .pfn = __phys_to_pfn(ISAIO_PHYS), + .length = ISAIO_SIZE, + .type = MT_DEVICE + }, { + .virtual = ISAMEM_BASE, + .pfn = __phys_to_pfn(ISAMEM_PHYS), + .length = ISAMEM_SIZE, + .type = MT_DEVICE + } }; static void __init ebsa110_map_io(void) diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c index ef7eb5dc91bd..c648bfb676a1 100644 --- a/arch/arm/mach-ebsa110/io.c +++ b/arch/arm/mach-ebsa110/io.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <asm/hardware.h> #include <asm/io.h> #include <asm/page.h> diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c index 2aa57fa46da3..e8832d0910ee 100644 --- a/arch/arm/mach-epxa10db/mm.c +++ b/arch/arm/mach-epxa10db/mm.c @@ -31,12 +31,37 @@ /* Page table mapping for I/O region */ static struct map_desc epxa10db_io_desc[] __initdata = { - { IO_ADDRESS(EXC_REGISTERS_BASE), EXC_REGISTERS_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK0_BASE), EXC_PLD_BLOCK0_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK1_BASE), EXC_PLD_BLOCK1_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK2_BASE), EXC_PLD_BLOCK2_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK3_BASE), EXC_PLD_BLOCK3_BASE, SZ_16K, MT_DEVICE }, - { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE, SZ_16M, MT_DEVICE } + { + .virtual = IO_ADDRESS(EXC_REGISTERS_BASE), + .pfn = __phys_to_pfn(EXC_REGISTERS_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE), + .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE), + .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE), + .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE), + .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE), + .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE), + .length = SZ_16M, + .type = MT_DEVICE + } }; void __init epxa10db_map_io(void) diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index eb8238c1ef06..dc09fd200c16 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -130,8 +130,17 @@ void __init footbridge_init_irq(void) * it means that we have extra bullet protection on our feet. */ static struct map_desc fb_common_io_desc[] __initdata = { - { ARMCSR_BASE, DC21285_ARMCSR_BASE, ARMCSR_SIZE, MT_DEVICE }, - { XBUS_BASE, 0x40000000, XBUS_SIZE, MT_DEVICE } + { + .virtual = ARMCSR_BASE, + .pfn = DC21285_ARMCSR_BASE, + .length = ARMCSR_SIZE, + .type = MT_DEVICE + }, { + .virtual = XBUS_BASE, + .pfn = __phys_to_pfn(0x40000000), + .length = XBUS_SIZE, + .type = MT_DEVICE + } }; /* @@ -140,11 +149,32 @@ static struct map_desc fb_common_io_desc[] __initdata = { */ static struct map_desc ebsa285_host_io_desc[] __initdata = { #if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST) - { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE }, - { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE }, - { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE }, - { PCIIACK_BASE, DC21285_PCI_IACK, PCIIACK_SIZE, MT_DEVICE }, - { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE } + { + .virtual = PCIMEM_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_MEM), + .length = PCIMEM_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCICFG0_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG), + .length = PCICFG0_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCICFG1_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG), + .length = PCICFG1_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCIIACK_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IACK), + .length = PCIIACK_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCIO_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IO), + .length = PCIO_SIZE, + .type = MT_DEVICE + } #endif }; @@ -153,8 +183,17 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { */ static struct map_desc co285_io_desc[] __initdata = { #ifdef CONFIG_ARCH_CO285 - { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE }, - { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE } + { + .virtual = PCIO_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IO), + .length = PCIO_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCIMEM_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_MEM), + .length = PCIMEM_SIZE, + .type = MT_DEVICE + } #endif }; diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 5110e2e65ddd..c096b4569308 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -237,7 +237,12 @@ void __init h720x_init_irq (void) } static struct map_desc h720x_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, }; /* Initialize io tables */ diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index f8a742bb2d5b..cb14b0682cef 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -273,8 +273,12 @@ static struct platform_device *devices[] __initdata = { }; static struct map_desc imx_io_desc[] __initdata = { - /* virtual physical length type */ - {IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE}, + { + .virtual = IMX_IO_BASE, + .pfn = __phys_to_pfn(IMX_IO_PHYS), + .length = IMX_IO_SIZE, + .type = MT_DEVICE + } }; void __init diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index a7511ddfe364..4cbdc1fe04b1 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -61,13 +61,37 @@ mx1ads_init(void) } static struct map_desc mx1ads_io_desc[] __initdata = { - /* virtual physical length type */ - {IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE}, - {IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE}, - {IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE}, - {IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE}, - {IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE}, - {IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE}, + { + .virtual = IMX_CS0_VIRT, + .pfn = __phys_to_pfn(IMX_CS0_PHYS), + .length = IMX_CS0_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS1_VIRT, + .pfn = __phys_to_pfn(IMX_CS1_PHYS), + .length = IMX_CS1_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS2_VIRT, + .pfn = __phys_to_pfn(IMX_CS2_PHYS), + .length = IMX_CS2_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS3_VIRT, + .pfn = __phys_to_pfn(IMX_CS3_PHYS), + .length = IMX_CS3_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS4_VIRT, + .pfn = __phys_to_pfn(IMX_CS4_PHYS), + .length = IMX_CS4_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS5_VIRT, + .pfn = __phys_to_pfn(IMX_CS5_PHYS), + .length = IMX_CS5_SIZE, + .type = MT_DEVICE + } }; static void __init diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 36e2b6eb67b7..f368b85f0447 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -75,19 +75,72 @@ */ static struct map_desc ap_io_desc[] __initdata = { - { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE }, - { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE }, - { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_64K, MT_DEVICE }, - { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE } + { + .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = PCI_MEMORY_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = PCI_CONFIG_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = PCI_V3_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE), + .length = SZ_64K, + .type = MT_DEVICE + }, { + .virtual = PCI_IO_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE), + .length = SZ_64K, + .type = MT_DEVICE + } }; static void __init ap_map_io(void) diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 2be5c03ab87f..aa34c58b96c4 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -74,17 +74,62 @@ */ static struct map_desc intcp_io_desc[] __initdata = { - { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, - { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, + { + .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = 0xfca00000, + .pfn = __phys_to_pfn(0xca000000), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = 0xfcb00000, + .pfn = __phys_to_pfn(0xcb000000), + .length = SZ_4K, + .type = MT_DEVICE + } }; static void __init intcp_map_io(void) diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index 0f921ba2750c..bb5091223b63 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -38,13 +38,17 @@ * Standard IO mapping for all IOP321 based systems */ static struct map_desc iop321_std_desc[] __initdata = { - /* virtual physical length type */ - - /* mem mapped registers */ - { IOP321_VIRT_MEM_BASE, IOP321_PHYS_MEM_BASE, 0x00002000, MT_DEVICE }, - - /* PCI IO space */ - { IOP321_PCI_LOWER_IO_VA, IOP321_PCI_LOWER_IO_PA, IOP321_PCI_IO_WINDOW_SIZE, MT_DEVICE } + { /* mem mapped registers */ + .virtual = IOP321_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP321_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), + .length = IOP321_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } }; #ifdef CONFIG_ARCH_IQ80321 diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index fc74b722f72f..a2533c3ab42f 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -37,13 +37,17 @@ * Standard IO mapping for all IOP331 based systems */ static struct map_desc iop331_std_desc[] __initdata = { - /* virtual physical length type */ - - /* mem mapped registers */ - { IOP331_VIRT_MEM_BASE, IOP331_PHYS_MEM_BASE, 0x00002000, MT_DEVICE }, - - /* PCI IO space */ - { IOP331_PCI_LOWER_IO_VA, IOP331_PCI_LOWER_IO_PA, IOP331_PCI_IO_WINDOW_SIZE, MT_DEVICE } + { /* mem mapped registers */ + .virtual = IOP331_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP331_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA), + .length = IOP331_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } }; static struct uart_port iop331_serial_ports[] = { diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c index 55992ab586ba..e874b54eefe3 100644 --- a/arch/arm/mach-iop3xx/iq31244-mm.c +++ b/arch/arm/mach-iop3xx/iq31244-mm.c @@ -29,10 +29,12 @@ * We use RedBoot's setup for the onboard devices. */ static struct map_desc iq31244_io_desc[] __initdata = { - /* virtual physical length type */ - - /* on-board devices */ - { IQ31244_UART, IQ31244_UART, 0x00100000, MT_DEVICE } + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE + } }; void __init iq31244_map_io(void) diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c index bb3e9e5a9aff..d9cac5e1fc3d 100644 --- a/arch/arm/mach-iop3xx/iq80321-mm.c +++ b/arch/arm/mach-iop3xx/iq80321-mm.c @@ -29,10 +29,12 @@ * We use RedBoot's setup for the onboard devices. */ static struct map_desc iq80321_io_desc[] __initdata = { - /* virtual physical length type */ - - /* on-board devices */ - { IQ80321_UART, IQ80321_UART, 0x00100000, MT_DEVICE } + { /* on-board devices */ + .virtual = IQ80321_UART, + .pfn = __phys_to_pfn(IQ80321_UART), + .length = 0x00100000, + .type = MT_DEVICE + } }; void __init iq80321_map_io(void) diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index f4d7f1f6ef85..01c393c504d0 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -83,42 +83,42 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg) static struct map_desc ixp2000_io_desc[] __initdata = { { .virtual = IXP2000_CAP_VIRT_BASE, - .physical = IXP2000_CAP_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), .length = IXP2000_CAP_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_INTCTL_VIRT_BASE, - .physical = IXP2000_INTCTL_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), .length = IXP2000_INTCTL_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CREG_VIRT_BASE, - .physical = IXP2000_PCI_CREG_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), .length = IXP2000_PCI_CREG_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CSR_VIRT_BASE, - .physical = IXP2000_PCI_CSR_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), .length = IXP2000_PCI_CSR_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_MSF_VIRT_BASE, - .physical = IXP2000_MSF_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), .length = IXP2000_MSF_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, - .physical = IXP2000_PCI_IO_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), .length = IXP2000_PCI_IO_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CFG0_VIRT_BASE, - .physical = IXP2000_PCI_CFG0_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), .length = IXP2000_PCI_CFG0_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CFG1_VIRT_BASE, - .physical = IXP2000_PCI_CFG1_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), .length = IXP2000_PCI_CFG1_SIZE, .type = MT_DEVICE } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 63ba0191aa65..8b4a839b6279 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -176,7 +176,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *************************************************************************/ static struct map_desc ixdp2x00_io_desc __initdata = { .virtual = IXDP2X00_VIRT_CPLD_BASE, - .physical = IXDP2X00_PHYS_CPLD_BASE, + .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE), .length = IXDP2X00_CPLD_SIZE, .type = MT_DEVICE }; diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 7a5109921287..fee1d7b73503 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -136,7 +136,7 @@ void __init ixdp2x01_init_irq(void) *************************************************************************/ static struct map_desc ixdp2x01_io_desc __initdata = { .virtual = IXDP2X01_VIRT_CPLD_BASE, - .physical = IXDP2X01_PHYS_CPLD_BASE, + .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE), .length = IXDP2X01_CPLD_REGION_SIZE, .type = MT_DEVICE }; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 36b6045213ee..6c396447c4e0 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -44,24 +44,24 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ .virtual = IXP4XX_PERIPHERAL_BASE_VIRT, - .physical = IXP4XX_PERIPHERAL_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), .length = IXP4XX_PERIPHERAL_REGION_SIZE, .type = MT_DEVICE }, { /* Expansion Bus Config Registers */ .virtual = IXP4XX_EXP_CFG_BASE_VIRT, - .physical = IXP4XX_EXP_CFG_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), .length = IXP4XX_EXP_CFG_REGION_SIZE, .type = MT_DEVICE }, { /* PCI Registers */ .virtual = IXP4XX_PCI_CFG_BASE_VIRT, - .physical = IXP4XX_PCI_CFG_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE }, #ifdef CONFIG_DEBUG_LL { /* Debug UART mapping */ .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, - .physical = IXP4XX_DEBUG_UART_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), .length = IXP4XX_DEBUG_UART_REGION_SIZE, .type = MT_DEVICE } diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index cb3dcd3bd00a..19f2fa2244c4 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -26,8 +26,17 @@ /* This function calls the board specific IRQ initialization function. */ static struct map_desc kev7a400_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, - { CPLD_VIRT, CPLD_PHYS, CPLD_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD_VIRT, + .pfn = __phys_to_pfn(CPLD_PHYS), + .length = CPLD_SIZE, + .type = MT_DEVICE + } }; void __init kev7a400_map_io(void) diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index 6eb61a17c63b..a20eabc132b0 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -227,23 +227,79 @@ void __init lh7a40x_init_board_irq (void) } static struct map_desc lpd7a400_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, - /* Mapping added to work around chip select problems */ - { IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE }, - { CF_VIRT, CF_PHYS, CF_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, { /* Mapping added to work around chip select problems */ + .virtual = IOBARRIER_VIRT, + .pfn = __phys_to_pfn(IOBARRIER_PHYS), + .length = IOBARRIER_SIZE, + .type = MT_DEVICE + }, { + .virtual = CF_VIRT, + .pfn = __phys_to_pfn(CF_PHYS), + .length = CF_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD02_VIRT, + .pfn = __phys_to_pfn(CPLD02_PHYS), + .length = CPLD02_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD06_VIRT, + .pfn = __phys_to_pfn(CPLD06_PHYS), + .length = CPLD06_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD08_VIRT, + .pfn = __phys_to_pfn(CPLD08_PHYS), + .length = CPLD08_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD0C_VIRT, + .pfn = __phys_to_pfn(CPLD0C_PHYS), + .length = CPLD0C_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD0E_VIRT, + .pfn = __phys_to_pfn(CPLD0E_PHYS), + .length = CPLD0E_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD10_VIRT, + .pfn = __phys_to_pfn(CPLD10_PHYS), + .length = CPLD10_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD12_VIRT, + .pfn = __phys_to_pfn(CPLD12_PHYS), + .length = CPLD12_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD14_VIRT, + .pfn = __phys_to_pfn(CPLD14_PHYS), + .length = CPLD14_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD16_VIRT, + .pfn = __phys_to_pfn(CPLD16_PHYS), + .length = CPLD16_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD18_VIRT, + .pfn = __phys_to_pfn(CPLD18_PHYS), + .length = CPLD18_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD1A_VIRT, + .pfn = __phys_to_pfn(CPLD1A_PHYS), + .length = CPLD1A_SIZE, + .type = MT_DEVICE + }, /* This mapping is redundant since the smc driver performs another. */ /* { CPLD00_VIRT, CPLD00_PHYS, CPLD00_SIZE, MT_DEVICE }, */ - { CPLD02_VIRT, CPLD02_PHYS, CPLD02_SIZE, MT_DEVICE }, - { CPLD06_VIRT, CPLD06_PHYS, CPLD06_SIZE, MT_DEVICE }, - { CPLD08_VIRT, CPLD08_PHYS, CPLD08_SIZE, MT_DEVICE }, - { CPLD0C_VIRT, CPLD0C_PHYS, CPLD0C_SIZE, MT_DEVICE }, - { CPLD0E_VIRT, CPLD0E_PHYS, CPLD0E_SIZE, MT_DEVICE }, - { CPLD10_VIRT, CPLD10_PHYS, CPLD10_SIZE, MT_DEVICE }, - { CPLD12_VIRT, CPLD12_PHYS, CPLD12_SIZE, MT_DEVICE }, - { CPLD14_VIRT, CPLD14_PHYS, CPLD14_SIZE, MT_DEVICE }, - { CPLD16_VIRT, CPLD16_PHYS, CPLD16_SIZE, MT_DEVICE }, - { CPLD18_VIRT, CPLD18_PHYS, CPLD18_SIZE, MT_DEVICE }, - { CPLD1A_VIRT, CPLD1A_PHYS, CPLD1A_SIZE, MT_DEVICE }, }; void __init diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index df0312b596e4..fd9183ff2ed5 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -103,8 +103,12 @@ static struct platform_device innovator_flash_device = { /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc innovator1510_io_desc[] __initdata = { -{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE, - MT_DEVICE }, + { + .virtual = OMAP1510_FPGA_BASE, + .pfn = __phys_to_pfn(OMAP1510_FPGA_START), + .length = OMAP1510_FPGA_SIZE, + .type = MT_DEVICE + } }; static struct resource innovator1510_smc91x_resources[] = { diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 107c68c8ab54..2ba26e239108 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -134,8 +134,12 @@ void omap_perseus2_init_irq(void) /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { - {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE, - MT_DEVICE}, + { + .virtual = H2P2_DBG_FPGA_BASE, + .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), + .length = H2P2_DBG_FPGA_SIZE, + .type = MT_DEVICE + } }; static void __init omap_perseus2_map_io(void) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index eb8261d7dead..79fb86535ebc 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -26,27 +26,59 @@ extern void omap_sram_init(void); * default mapping provided here. */ static struct map_desc omap_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + } }; #ifdef CONFIG_ARCH_OMAP730 static struct map_desc omap730_io_desc[] __initdata = { - { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, - { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, + { + .virtual = OMAP730_DSP_BASE, + .pfn = __phys_to_pfn(OMAP730_DSP_START), + .length = OMAP730_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP730_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP730_DSPREG_START), + .length = OMAP730_DSPREG_SIZE, + .type = MT_DEVICE + } }; #endif #ifdef CONFIG_ARCH_OMAP1510 static struct map_desc omap1510_io_desc[] __initdata = { - { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, - { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, + { + .virtual = OMAP1510_DSP_BASE, + .pfn = __phys_to_pfn(OMAP1510_DSP_START), + .length = OMAP1510_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP1510_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP1510_DSPREG_START), + .length = OMAP1510_DSPREG_SIZE, + .type = MT_DEVICE + } }; #endif #if defined(CONFIG_ARCH_OMAP16XX) static struct map_desc omap16xx_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, + { + .virtual = OMAP16XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP16XX_DSP_START), + .length = OMAP16XX_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP16XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START), + .length = OMAP16XX_DSPREG_SIZE, + .type = MT_DEVICE + } }; #endif diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 0ef428287055..136c269db0b7 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -222,24 +222,22 @@ static int corgi_ssp_remove(struct device *dev) return 0; } -static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level) +static int corgi_ssp_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - } + ssp_flush(&corgi_ssp_dev); + ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); + return 0; } -static int corgi_ssp_resume(struct device *dev, u32 level) +static int corgi_ssp_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - } + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ + ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); + ssp_enable(&corgi_ssp_dev); + return 0; } diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 1d7677669a76..3248bc9b9495 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -34,6 +34,7 @@ #include <asm/arch/udc.h> #include <asm/arch/pxafb.h> #include <asm/arch/mmc.h> +#include <asm/arch/irda.h> #include <asm/arch/i2c.h> #include "generic.h" @@ -92,14 +93,42 @@ EXPORT_SYMBOL(pxa_set_cken); * and cache flush area. */ static struct map_desc standard_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */ - { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */ - { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */ - { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */ - { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */ - { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */ - { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE } /* UNCACHED_PHYS_0 */ + { /* Devs */ + .virtual = 0xf2000000, + .pfn = __phys_to_pfn(0x40000000), + .length = 0x02000000, + .type = MT_DEVICE + }, { /* LCD */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x44000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* Mem Ctl */ + .virtual = 0xf6000000, + .pfn = __phys_to_pfn(0x48000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* USB host */ + .virtual = 0xf8000000, + .pfn = __phys_to_pfn(0x4c000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* Camera */ + .virtual = 0xfa000000, + .pfn = __phys_to_pfn(0x50000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* IMem ctl */ + .virtual = 0xfe000000, + .pfn = __phys_to_pfn(0x58000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* UNCACHED_PHYS_0 */ + .virtual = 0xff000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; void __init pxa_map_io(void) @@ -225,6 +254,10 @@ static struct platform_device stuart_device = { .name = "pxa2xx-uart", .id = 2, }; +static struct platform_device hwuart_device = { + .name = "pxa2xx-uart", + .id = 3, +}; static struct resource i2c_resources[] = { { @@ -265,10 +298,26 @@ static struct resource i2s_resources[] = { static struct platform_device i2s_device = { .name = "pxa2xx-i2s", .id = -1, - .resource = i2c_resources, + .resource = i2s_resources, .num_resources = ARRAY_SIZE(i2s_resources), }; +static u64 pxaficp_dmamask = ~(u32)0; + +static struct platform_device pxaficp_device = { + .name = "pxa2xx-ir", + .id = -1, + .dev = { + .dma_mask = &pxaficp_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) +{ + pxaficp_device.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &pxamci_device, &udc_device, @@ -276,13 +325,26 @@ static struct platform_device *devices[] __initdata = { &ffuart_device, &btuart_device, &stuart_device, + &pxaficp_device, &i2c_device, &i2s_device, }; static int __init pxa_init(void) { - return platform_add_devices(devices, ARRAY_SIZE(devices)); + int cpuid, ret; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) + return ret; + + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ + cpuid = read_cpuid(CPUID_ID); + if (((cpuid >> 4) & 0xfff) == 0x2d0 || + ((cpuid >> 4) & 0xfff) == 0x290) + ret = platform_device_register(&hwuart_device); + + return ret; } subsys_initcall(pxa_init); diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 386e107b53cc..01a83ab09ac3 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -152,16 +152,17 @@ static void __init idp_init_irq(void) } static struct map_desc idp_io_desc[] __initdata = { - /* virtual physical length type */ - - { IDP_COREVOLT_VIRT, - IDP_COREVOLT_PHYS, - IDP_COREVOLT_SIZE, - MT_DEVICE }, - { IDP_CPLD_VIRT, - IDP_CPLD_PHYS, - IDP_CPLD_SIZE, - MT_DEVICE } + { + .virtual = IDP_COREVOLT_VIRT, + .pfn = __phys_to_pfn(IDP_COREVOLT_PHYS), + .length = IDP_COREVOLT_SIZE, + .type = MT_DEVICE + }, { + .virtual = IDP_CPLD_VIRT, + .pfn = __phys_to_pfn(IDP_CPLD_PHYS), + .length = IDP_CPLD_SIZE, + .type = MT_DEVICE + } }; static void __init idp_map_io(void) diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1f38033921e9..beccf455f796 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -35,6 +35,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/lubbock.h> #include <asm/arch/udc.h> +#include <asm/arch/irda.h> #include <asm/arch/pxafb.h> #include <asm/arch/mmc.h> @@ -237,16 +238,40 @@ static struct pxamci_platform_data lubbock_mci_platform_data = { .init = lubbock_mci_init, }; +static void lubbock_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + LUB_MISC_WR &= ~(1 << 4); + } else if (mode & IR_FIRMODE) { + LUB_MISC_WR |= 1 << 4; + } + local_irq_restore(flags); +} + +static struct pxaficp_platform_data lubbock_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE, + .transceiver_mode = lubbock_irda_transceiver_mode, +}; + static void __init lubbock_init(void) { pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); + pxa_set_ficp_info(&lubbock_ficp_platform_data); (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } static struct map_desc lubbock_io_desc[] __initdata = { - { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */ + { /* CPLD */ + .virtual = LUBBOCK_FPGA_VIRT, + .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init lubbock_map_io(void) diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 85fdb5b1470a..a48c64026e1f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -37,6 +37,7 @@ #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> #include <asm/arch/mmc.h> +#include <asm/arch/irda.h> #include "generic.h" @@ -294,6 +295,29 @@ static struct pxamci_platform_data mainstone_mci_platform_data = { .exit = mainstone_mci_exit, }; +static void mainstone_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR; + } else if (mode & IR_FIRMODE) { + MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR; + } + if (mode & IR_OFF) { + MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF; + } else { + MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL; + } + local_irq_restore(flags); +} + +static struct pxaficp_platform_data mainstone_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = mainstone_irda_transceiver_mode, +}; + static void __init mainstone_init(void) { /* @@ -313,11 +337,17 @@ static void __init mainstone_init(void) set_pxa_fb_info(&toshiba_ltm035a776c); pxa_set_mci_info(&mainstone_mci_platform_data); + pxa_set_ficp_info(&mainstone_ficp_platform_data); } static struct map_desc mainstone_io_desc[] __initdata = { - { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */ + { /* CPLD */ + .virtual = MST_FPGA_VIRT, + .pfn = __phys_to_pfn(MST_FPGA_PHYS), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init mainstone_map_io(void) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 7869c3b4e62f..573a5758e781 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -129,7 +129,7 @@ void pxa_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(3); + pxa_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9a791b07118d..09a5d593f04b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -157,7 +157,7 @@ void pxa_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(3); + pxa_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 5786ccad938c..c9862688ff3d 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -28,7 +28,9 @@ /* * pxa_cpu_suspend() * - * Forces CPU into sleep state + * Forces CPU into sleep state. + * + * r0 = value for PWRMODE M field for desired sleep state */ ENTRY(pxa_cpu_suspend) @@ -53,6 +55,7 @@ ENTRY(pxa_cpu_suspend) mov r10, sp stmfd sp!, {r3 - r10} + mov r5, r0 @ save sleep mode @ preserve phys address of stack mov r0, sp bl sleep_phys_sp @@ -66,7 +69,7 @@ ENTRY(pxa_cpu_suspend) @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, #3 @ sleep mode + mov r1, r5 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 8a3f27b76784..6f6dbbd08021 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -21,7 +21,7 @@ ENTRY(pxa_cpu_standby) ldr r0, =PSSR mov r1, #(PSSR_PH | PSSR_STS) - mov r2, #2 + mov r2, #PWRMODE_STANDBY mov r3, #UNCACHED_PHYS_0 @ Read mem context in. ldr ip, [r3] b 1f diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index e3587efec4bf..5c4ac1c008a6 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -61,9 +61,22 @@ static int __init parse_tag_acorn(const struct tag *tag) __tagtable(ATAG_ACORN, parse_tag_acorn); static struct map_desc rpc_io_desc[] __initdata = { - { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */ - { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */ - { EASI_BASE, EASI_START, EASI_SIZE, MT_DEVICE } /* EASI space */ + { /* VRAM */ + .virtual = SCREEN_BASE, + .pfn = __phys_to_pfn(SCREEN_START), + .length = 2*1048576, + .type = MT_DEVICE + }, { /* IO space */ + .virtual = (u32)IO_BASE, + .pfn = __phys_to_pfn(IO_START), + .length = IO_SIZE , + .type = MT_DEVICE + }, { /* EASI space */ + .virtual = EASI_BASE, + .pfn = __phys_to_pfn(EASI_START), + .length = EASI_SIZE, + .type = MT_DEVICE + } }; static void __init rpc_map_io(void) diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h index 478c15c0e36a..9cbe5eef492b 100644 --- a/arch/arm/mach-s3c2410/cpu.h +++ b/arch/arm/mach-s3c2410/cpu.h @@ -21,7 +21,7 @@ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ -#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE } +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ #define MHZ (1000*1000) diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 0077937a7ab8..08bc7d95a45d 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -47,7 +47,7 @@ struct platform_device *s3c24xx_uart_devs[3]; static struct resource s3c_usb_resource[] = { [0] = { .start = S3C2410_PA_USBHOST, - .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST, + .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -77,7 +77,7 @@ EXPORT_SYMBOL(s3c_device_usb); static struct resource s3c_lcd_resource[] = { [0] = { .start = S3C2410_PA_LCD, - .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD, + .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -103,21 +103,25 @@ struct platform_device s3c_device_lcd = { EXPORT_SYMBOL(s3c_device_lcd); -static struct s3c2410fb_mach_info s3c2410fb_info; - -void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info) +void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) { - memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info)); - s3c_device_lcd.dev.platform_data = &s3c2410fb_info; + struct s3c2410fb_mach_info *npd; + + npd = kmalloc(sizeof(*npd), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(*npd)); + s3c_device_lcd.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for LCD platform data\n"); + } } -EXPORT_SYMBOL(set_s3c2410fb_info); /* NAND Controller */ static struct resource s3c_nand_resource[] = { [0] = { .start = S3C2410_PA_NAND, - .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND, + .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1, .flags = IORESOURCE_MEM, } }; @@ -136,7 +140,7 @@ EXPORT_SYMBOL(s3c_device_nand); static struct resource s3c_usbgadget_resource[] = { [0] = { .start = S3C2410_PA_USBDEV, - .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV, + .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -161,7 +165,7 @@ EXPORT_SYMBOL(s3c_device_usbgadget); static struct resource s3c_wdt_resource[] = { [0] = { .start = S3C2410_PA_WATCHDOG, - .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG, + .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -186,7 +190,7 @@ EXPORT_SYMBOL(s3c_device_wdt); static struct resource s3c_i2c_resource[] = { [0] = { .start = S3C2410_PA_IIC, - .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC, + .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -211,7 +215,7 @@ EXPORT_SYMBOL(s3c_device_i2c); static struct resource s3c_iis_resource[] = { [0] = { .start = S3C2410_PA_IIS, - .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS, + .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1, .flags = IORESOURCE_MEM, } }; @@ -265,7 +269,7 @@ EXPORT_SYMBOL(s3c_device_rtc); static struct resource s3c_adc_resource[] = { [0] = { .start = S3C2410_PA_ADC, - .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC, + .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -288,7 +292,7 @@ struct platform_device s3c_device_adc = { static struct resource s3c_sdi_resource[] = { [0] = { .start = S3C2410_PA_SDI, - .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI, + .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -465,7 +469,7 @@ EXPORT_SYMBOL(s3c_device_timer3); static struct resource s3c_camif_resource[] = { [0] = { .start = S3C2440_PA_CAMIF, - .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF, + .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 94f1776cf312..23ea3d5fa09c 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -30,6 +30,7 @@ * 04-Oct-2004 BJD Added irq filter controls for GPIO * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code * 13-Mar-2005 BJD Updates for __iomem + * 26-Oct-2005 BJD Added generic configuration types */ @@ -58,6 +59,27 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; } + switch (function) { + case S3C2410_GPIO_LEAVE: + mask = 0; + function = 0; + break; + + case S3C2410_GPIO_INPUT: + case S3C2410_GPIO_OUTPUT: + case S3C2410_GPIO_SFN2: + case S3C2410_GPIO_SFN3: + if (pin < S3C2410_GPIO_BANKB) { + function &= 1; + function <<= S3C2410_GPIO_OFFSET(pin); + } else { + function &= 3; + function <<= S3C2410_GPIO_OFFSET(pin)*2; + } + } + + /* modify the specified register wwith IRQs off */ + local_irq_save(flags); con = __raw_readl(base + 0x00); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 7b51bfd0ba6d..c1b5c63ec24a 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -32,6 +32,7 @@ * 25-Jul-2005 BJD Removed ASIX static mappings * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus * 20-Sep-2005 BJD Added static to non-exported items + * 26-Oct-2005 BJD Added FB platform data */ #include <linux/kernel.h> @@ -61,8 +62,10 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-mem.h> #include <asm/arch/regs-lcd.h> + #include <asm/arch/nand.h> #include <asm/arch/iic.h> +#include <asm/arch/fb.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -399,6 +402,38 @@ static struct s3c2410_platform_i2c bast_i2c_info = { .max_freq = 130*1000, }; + +static struct s3c2410fb_mach_info __initdata bast_lcd_info = { + .width = 640, + .height = 480, + + .xres = { + .min = 320, + .max = 1024, + .defval = 640, + }, + + .yres = { + .min = 240, + .max = 600, + .defval = 480, + }, + + .bpp = { + .min = 4, + .max = 16, + .defval = 8, + }, + + .regs = { + .lcdcon1 = 0x00000176, + .lcdcon2 = 0x1d77c7c2, + .lcdcon3 = 0x013a7f13, + .lcdcon4 = 0x00000057, + .lcdcon5 = 0x00014b02, + } +}; + /* Standard BAST devices */ static struct platform_device *bast_devices[] __initdata = { @@ -454,6 +489,10 @@ static void __init bast_map_io(void) usb_simtec_init(); } +static void __init bast_init(void) +{ + s3c24xx_fb_set_platdata(&bast_lcd_info); +} MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ @@ -463,5 +502,6 @@ MACHINE_START(BAST, "Simtec-BAST") .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, + .init_machine = bast_init, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index fb3cb01266e5..7efeaaad2361 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -25,6 +25,7 @@ * 14-Jan-2005 BJD Added clock init * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 20-Sep-2005 BJD Added static to non-exported items + * 26-Oct-2005 BJD Changed name of fb init call */ #include <linux/kernel.h> @@ -164,7 +165,7 @@ static void __init h1940_init_irq(void) static void __init h1940_init(void) { - set_s3c2410fb_info(&h1940_lcdcfg); + s3c24xx_fb_set_platdata(&h1940_lcdcfg); } MACHINE_START(H1940, "IPAQ-H1940") diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 722ef46b630a..6950e61b7914 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -19,6 +19,7 @@ * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA * 14-Mar-2005 BJD void __iomem fixes * 20-Sep-2005 BJD Added static to non-exported items + * 26-Oct-2005 BJD Added framebuffer data */ #include <linux/kernel.h> @@ -41,7 +42,10 @@ //#include <asm/debug-ll.h> #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + #include <asm/arch/idle.h> +#include <asm/arch/fb.h> #include "s3c2410.h" #include "s3c2440.h" @@ -86,6 +90,70 @@ static struct s3c2410_uartcfg smdk2440_uartcfgs[] = { } }; +/* LCD driver info */ + +static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x04), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(7) | + S3C2410_LCDCON2_LINEVAL(319) | + S3C2410_LCDCON2_VFPD(6) | + S3C2410_LCDCON2_VSPW(3), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(19) | + S3C2410_LCDCON3_HOZVAL(239) | + S3C2410_LCDCON3_HFPD(7), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(3), + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + +#if 0 + /* currently setup by downloader */ + .gpccon = 0xaa940659, + .gpccon_mask = 0xffffffff, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + .gpdcon = 0xaa84aaa0, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, +#endif + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .min = 320, + .max = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + static struct platform_device *smdk2440_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -121,6 +189,8 @@ static void __init smdk2440_machine_init(void) s3c2410_gpio_setpin(S3C2410_GPF6, 0); s3c2410_gpio_setpin(S3C2410_GPF7, 0); + s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg); + s3c2410_pm_init(); } diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 24687f511bf5..75efb5da5b6d 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -388,9 +388,17 @@ static struct sa1100_port_fns assabet_port_fns __initdata = { }; static struct map_desc assabet_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */ - { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE } /* MQ200 */ + { /* Board Control Register */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x12000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* MQ200 */ + .virtual = 0xf2800000, + .pfn = __phys_to_pfn(0x4b800000), + .length = 0x00800000, + .type = MT_DEVICE + } }; static void __init assabet_map_io(void) diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b6169cb09196..c92cebff7f8e 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -254,10 +254,22 @@ EXPORT_SYMBOL(badge4_set_5V); static struct map_desc badge4_io_desc[] __initdata = { - /* virtual physical length type */ - {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM bank 1 */ - {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM bank 2 */ - {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111 */ + { /* SRAM bank 1 */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SRAM bank 2 */ + .virtual = 0xf2000000, + .pfn = __phys_to_pfn(0x10000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SA-1111 */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x48000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 9484be7dc671..23cb74885275 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -100,8 +100,12 @@ static void __init cerf_init_irq(void) } static struct map_desc cerf_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE } /* Crystal Ethernet Chip */ + { /* Crystal Ethernet Chip */ + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init cerf_map_io(void) diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6ecab7e2c238..7fd6e29c36b7 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -171,9 +171,17 @@ static void __init collie_init(void) } static struct map_desc collie_io_desc[] __initdata = { - /* virtual physical length type */ - {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */ - {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */ + { /* 32M main flash (cs0) */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x02000000, + .type = MT_DEVICE + }, { /* 32M boot flash (cs1) */ + .virtual = 0xea000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x02000000, + .type = MT_DEVICE + } }; static void __init collie_map_io(void) diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 3f1e358455e5..93619497779c 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -369,11 +369,27 @@ EXPORT_SYMBOL(sa1100fb_lcd_power); */ static struct map_desc standard_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */ - { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */ - { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */ - { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE } /* LCD + DMA */ + { /* PCM */ + .virtual = 0xf8000000, + .pfn = __phys_to_pfn(0x80000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SCM */ + .virtual = 0xfa000000, + .pfn = __phys_to_pfn(0x90000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* MER */ + .virtual = 0xfc000000, + .pfn = __phys_to_pfn(0xa0000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* LCD + DMA */ + .virtual = 0xfe000000, + .pfn = __phys_to_pfn(0xb0000000), + .length = 0x00200000, + .type = MT_DEVICE + }, }; void __init sa1100_map_io(void) diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index e7aa2681ca64..e8352b7f74b0 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -223,10 +223,22 @@ static void h3xxx_lcd_power(int enable) } static struct map_desc h3600_io_desc[] __initdata = { - /* virtual physical length type */ - { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */ - { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */ - { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */ + { /* static memory bank 2 CS#2 */ + .virtual = H3600_BANK_2_VIRT, + .pfn = __phys_to_pfn(SA1100_CS2_PHYS), + .length = 0x02800000, + .type = MT_DEVICE + }, { /* static memory bank 4 CS#4 */ + .virtual = H3600_BANK_4_VIRT, + .pfn = __phys_to_pfn(SA1100_CS4_PHYS), + .length = 0x00800000, + .type = MT_DEVICE + }, { /* EGPIO 0 CS#5 */ + .virtual = H3600_EGPIO_VIRT, + .pfn = __phys_to_pfn(H3600_EGPIO_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + } }; /* diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 502d65cfe654..c922e043c424 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -57,8 +57,12 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate) */ static struct map_desc hackkit_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */ + { /* Flash bank 0 */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x01000000, + .type = MT_DEVICE + }, }; static struct sa1100_port_fns hackkit_port_fns __initdata = { diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 2f497112c96a..9c363bfcf310 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -81,10 +81,22 @@ static int __init jornada720_init(void) arch_initcall(jornada720_init); static struct map_desc jornada720_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */ - { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */ - { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE } /* SA-1111 */ + { /* Epson registers */ + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0x48000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* Epson frame buffer */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x48200000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SA-1111 */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x40000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init jornada720_map_io(void) diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index ed6744d480af..8c9e3dd52942 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -31,9 +31,17 @@ static void __init lart_init(void) } static struct map_desc lart_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */ - { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE } /* main flash, alternative location */ + { /* main flash memory */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x00400000, + .type = MT_DEVICE + }, { /* main flash, alternative location */ + .virtual = 0xec000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x00400000, + .type = MT_DEVICE + } }; static void __init lart_map_io(void) diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index fc061641b7be..052e4caedb89 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev) /* * LDM power management. */ -static int neponset_suspend(struct device *dev, pm_message_t state, u32 level) +static int neponset_suspend(struct device *dev, pm_message_t state) { /* * Save state. */ - if (level == SUSPEND_SAVE_STATE || - level == SUSPEND_DISABLE || - level == SUSPEND_POWER_DOWN) { - if (!dev->power.saved_state) - dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); - if (!dev->power.saved_state) - return -ENOMEM; - - *(unsigned int *)dev->power.saved_state = NCR_0; - } + if (!dev->power.saved_state) + dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); + if (!dev->power.saved_state) + return -ENOMEM; + + *(unsigned int *)dev->power.saved_state = NCR_0; return 0; } -static int neponset_resume(struct device *dev, u32 level) +static int neponset_resume(struct device *dev) { - if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) { - if (dev->power.saved_state) { - NCR_0 = *(unsigned int *)dev->power.saved_state; - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; - } + if (dev->power.saved_state) { + NCR_0 = *(unsigned int *)dev->power.saved_state; + kfree(dev->power.saved_state); + dev->power.saved_state = NULL; } return 0; @@ -331,9 +325,17 @@ static int __init neponset_init(void) subsys_initcall(neponset_init); static struct map_desc neponset_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */ - { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE } /* SA-1111 */ + { /* System Registers */ + .virtual = 0xf3000000, + .pfn = __phys_to_pfn(0x10000000), + .length = SZ_1M, + .type = MT_DEVICE + }, { /* SA-1111 */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x40000000), + .length = SZ_1M, + .type = MT_DEVICE + } }; void __init neponset_map_io(void) diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 07f6d5fd7bb0..cfb6658e5cdf 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -60,11 +60,17 @@ EXPORT_SYMBOL(set_cs3_bit); EXPORT_SYMBOL(clear_cs3_bit); static struct map_desc simpad_io_desc[] __initdata = { - /* virtual physical length type */ - /* MQ200 */ - { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE }, - /* Paules CS3, write only */ - { 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE }, + { /* MQ200 */ + .virtual = 0xf2800000, + .pfn = __phys_to_pfn(0x4b800000), + .length = 0x00800000, + .type = MT_DEVICE + }, { /* Paules CS3, write only */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x18000000), + .length = 0x00100000, + .type = MT_DEVICE + }, }; diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 946c0d11c73b..2d428b6dbb58 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -62,7 +62,12 @@ arch_initcall(shark_init); extern void shark_init_irq(void); static struct map_desc shark_io_desc[] __initdata = { - { IO_BASE , IO_START , IO_SIZE , MT_DEVICE } + { + .virtual = IO_BASE, + .pfn = __phys_to_pfn(IO_START), + .length = IO_SIZE, + .type = MT_DEVICE + } }; static void __init shark_map_io(void) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index a30e0451df72..7e4bdd07f4af 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -186,25 +186,82 @@ void __init versatile_init_irq(void) } static struct map_desc versatile_io_desc[] __initdata = { - { IO_ADDRESS(VERSATILE_SYS_BASE), VERSATILE_SYS_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_SIC_BASE), VERSATILE_SIC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_VIC_BASE), VERSATILE_VIC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_SCTL_BASE), VERSATILE_SCTL_BASE, SZ_4K * 9, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_SYS_BASE), + .pfn = __phys_to_pfn(VERSATILE_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_SIC_BASE), + .pfn = __phys_to_pfn(VERSATILE_SIC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_VIC_BASE), + .pfn = __phys_to_pfn(VERSATILE_VIC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), + .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), + .length = SZ_4K * 9, + .type = MT_DEVICE + }, #ifdef CONFIG_MACH_VERSATILE_AB - { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_IB2_BASE), VERSATILE_IB2_BASE, SZ_64M, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE), + .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_IB2_BASE), + .pfn = __phys_to_pfn(VERSATILE_IB2_BASE), + .length = SZ_64M, + .type = MT_DEVICE + }, #endif #ifdef CONFIG_DEBUG_LL - { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_UART0_BASE), + .pfn = __phys_to_pfn(VERSATILE_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, #endif #ifdef CONFIG_PCI - { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE }, - { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE }, - { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE), + .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_VIRT_BASE, + .pfn = __phys_to_pfn(VERSATILE_PCI_BASE), + .length = VERSATILE_PCI_BASE_SIZE, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_CFG_VIRT_BASE, + .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), + .length = VERSATILE_PCI_CFG_BASE_SIZE, + .type = MT_DEVICE + }, #if 0 - { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE }, - { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE }, - { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE }, + { + .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), + .length = SZ_16M, + .type = MT_DEVICE + }, #endif #endif }; diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 26356ce4da54..82f4d5e27c54 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -75,7 +75,7 @@ static struct vm_region consistent_head = { }; static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, int gfp) +vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -133,7 +133,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad #endif static void * -__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp, +__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot) { struct page *page; @@ -251,7 +251,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp, * virtual and bus address for that space. */ void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return __dma_alloc(dev, size, handle, gfp, pgprot_noncached(pgprot_kernel)); @@ -263,7 +263,7 @@ EXPORT_SYMBOL(dma_alloc_coherent); * dma_alloc_coherent above. */ void * -dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return __dma_alloc(dev, size, handle, gfp, pgprot_writecombine(pgprot_kernel)); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index edffa47a4b2a..f4496813615a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mm/init.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2005 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -86,14 +86,19 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -struct node_info { - unsigned int start; - unsigned int end; - int bootmap_pages; -}; +static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) +{ + return pmd_offset(pgd, virt); +} + +static inline pmd_t *pmd_off_k(unsigned long virt) +{ + return pmd_off(pgd_offset_k(virt), virt); +} -#define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT) +#define for_each_nodebank(iter,mi,no) \ + for (iter = 0; iter < mi->nr_banks; iter++) \ + if (mi->bank[iter].node == no) /* * FIXME: We really want to avoid allocating the bootmap bitmap @@ -106,15 +111,12 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) { unsigned int start_pfn, bank, bootmap_pfn; - start_pfn = O_PFN_UP(__pa(&_end)); + start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT; bootmap_pfn = 0; - for (bank = 0; bank < mi->nr_banks; bank ++) { + for_each_nodebank(bank, mi, node) { unsigned int start, end; - if (mi->bank[bank].node != node) - continue; - start = mi->bank[bank].start >> PAGE_SHIFT; end = (mi->bank[bank].size + mi->bank[bank].start) >> PAGE_SHIFT; @@ -140,92 +142,6 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) return bootmap_pfn; } -/* - * Scan the memory info structure and pull out: - * - the end of memory - * - the number of nodes - * - the pfn range of each node - * - the number of bootmem bitmap pages - */ -static unsigned int __init -find_memend_and_nodes(struct meminfo *mi, struct node_info *np) -{ - unsigned int i, bootmem_pages = 0, memend_pfn = 0; - - for (i = 0; i < MAX_NUMNODES; i++) { - np[i].start = -1U; - np[i].end = 0; - np[i].bootmap_pages = 0; - } - - for (i = 0; i < mi->nr_banks; i++) { - unsigned long start, end; - int node; - - if (mi->bank[i].size == 0) { - /* - * Mark this bank with an invalid node number - */ - mi->bank[i].node = -1; - continue; - } - - node = mi->bank[i].node; - - /* - * Make sure we haven't exceeded the maximum number of nodes - * that we have in this configuration. If we have, we're in - * trouble. (maybe we ought to limit, instead of bugging?) - */ - if (node >= MAX_NUMNODES) - BUG(); - node_set_online(node); - - /* - * Get the start and end pfns for this bank - */ - start = mi->bank[i].start >> PAGE_SHIFT; - end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; - - if (np[node].start > start) - np[node].start = start; - - if (np[node].end < end) - np[node].end = end; - - if (memend_pfn < end) - memend_pfn = end; - } - - /* - * Calculate the number of pages we require to - * store the bootmem bitmaps. - */ - for_each_online_node(i) { - if (np[i].end == 0) - continue; - - np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end - - np[i].start); - bootmem_pages += np[i].bootmap_pages; - } - - high_memory = __va(memend_pfn << PAGE_SHIFT); - - /* - * This doesn't seem to be used by the Linux memory - * manager any more. If we can get rid of it, we - * also get rid of some of the stuff above as well. - * - * Note: max_low_pfn and max_pfn reflect the number - * of _pages_ in the system, not the maximum PFN. - */ - max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET); - max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET); - - return bootmem_pages; -} - static int __init check_initrd(struct meminfo *mi) { int initrd_node = -2; @@ -266,9 +182,8 @@ static int __init check_initrd(struct meminfo *mi) /* * Reserve the various regions of node 0 */ -static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages) +static __init void reserve_node_zero(pg_data_t *pgdat) { - pg_data_t *pgdat = NODE_DATA(0); unsigned long res_size = 0; /* @@ -289,13 +204,6 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot PTRS_PER_PGD * sizeof(pgd_t)); /* - * And don't forget to reserve the allocator bitmap, - * which will be freed later. - */ - reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT, - bootmap_pages << PAGE_SHIFT); - - /* * Hmm... This should go elsewhere, but we really really need to * stop things allocating the low memory; ideally we need a better * implementation of GFP_DMA which does not assume that DMA-able @@ -324,183 +232,276 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); } -/* - * Register all available RAM in this node with the bootmem allocator. - */ -static inline void free_bootmem_node_bank(int node, struct meminfo *mi) +void __init build_mem_type_table(void); +void __init create_mapping(struct map_desc *md); + +static unsigned long __init +bootmem_init_node(int node, int initrd_node, struct meminfo *mi) { - pg_data_t *pgdat = NODE_DATA(node); - int bank; + unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; + unsigned long start_pfn, end_pfn, boot_pfn; + unsigned int boot_pages; + pg_data_t *pgdat; + int i; - for (bank = 0; bank < mi->nr_banks; bank++) - if (mi->bank[bank].node == node) - free_bootmem_node(pgdat, mi->bank[bank].start, - mi->bank[bank].size); -} + start_pfn = -1UL; + end_pfn = 0; -/* - * Initialise the bootmem allocator for all nodes. This is called - * early during the architecture specific initialisation. - */ -static void __init bootmem_init(struct meminfo *mi) -{ - struct node_info node_info[MAX_NUMNODES], *np = node_info; - unsigned int bootmap_pages, bootmap_pfn, map_pg; - int node, initrd_node; + /* + * Calculate the pfn range, and map the memory banks for this node. + */ + for_each_nodebank(i, mi, node) { + unsigned long start, end; + struct map_desc map; - bootmap_pages = find_memend_and_nodes(mi, np); - bootmap_pfn = find_bootmap_pfn(0, mi, bootmap_pages); - initrd_node = check_initrd(mi); + start = mi->bank[i].start >> PAGE_SHIFT; + end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; - map_pg = bootmap_pfn; + if (start_pfn > start) + start_pfn = start; + if (end_pfn < end) + end_pfn = end; + + map.pfn = __phys_to_pfn(mi->bank[i].start); + map.virtual = __phys_to_virt(mi->bank[i].start); + map.length = mi->bank[i].size; + map.type = MT_MEMORY; + + create_mapping(&map); + } /* - * Initialise the bootmem nodes. - * - * What we really want to do is: - * - * unmap_all_regions_except_kernel(); - * for_each_node_in_reverse_order(node) { - * map_node(node); - * allocate_bootmem_map(node); - * init_bootmem_node(node); - * free_bootmem_node(node); - * } - * - * but this is a 2.5-type change. For now, we just set - * the nodes up in reverse order. - * - * (we could also do with rolling bootmem_init and paging_init - * into one generic "memory_init" type function). + * If there is no memory in this node, ignore it. */ - np += num_online_nodes() - 1; - for (node = num_online_nodes() - 1; node >= 0; node--, np--) { - /* - * If there are no pages in this node, ignore it. - * Note that node 0 must always have some pages. - */ - if (np->end == 0 || !node_online(node)) { - if (node == 0) - BUG(); - continue; - } + if (end_pfn == 0) + return end_pfn; - /* - * Initialise the bootmem allocator. - */ - init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end); - free_bootmem_node_bank(node, mi); - map_pg += np->bootmap_pages; + /* + * Allocate the bootmem bitmap page. + */ + boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + boot_pfn = find_bootmap_pfn(node, mi, boot_pages); - /* - * If this is node 0, we need to reserve some areas ASAP - - * we may use bootmem on node 0 to setup the other nodes. - */ - if (node == 0) - reserve_node_zero(bootmap_pfn, bootmap_pages); - } + /* + * Initialise the bootmem allocator for this node, handing the + * memory banks over to bootmem. + */ + node_set_online(node); + pgdat = NODE_DATA(node); + init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn); + for_each_nodebank(i, mi, node) + free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size); + + /* + * Reserve the bootmem bitmap for this node. + */ + reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, + boot_pages << PAGE_SHIFT); #ifdef CONFIG_BLK_DEV_INITRD - if (phys_initrd_size && initrd_node >= 0) { - reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start, + /* + * If the initrd is in this node, reserve its memory. + */ + if (node == initrd_node) { + reserve_bootmem_node(pgdat, phys_initrd_start, phys_initrd_size); initrd_start = __phys_to_virt(phys_initrd_start); initrd_end = initrd_start + phys_initrd_size; } #endif - BUG_ON(map_pg != bootmap_pfn + bootmap_pages); + /* + * Finally, reserve any node zero regions. + */ + if (node == 0) + reserve_node_zero(pgdat); + + /* + * initialise the zones within this node. + */ + memset(zone_size, 0, sizeof(zone_size)); + memset(zhole_size, 0, sizeof(zhole_size)); + + /* + * The size of this node has already been determined. If we need + * to do anything fancy with the allocation of this memory to the + * zones, now is the time to do it. + */ + zone_size[0] = end_pfn - start_pfn; + + /* + * For each bank in this node, calculate the size of the holes. + * holes = node_size - sum(bank_sizes_in_node) + */ + zhole_size[0] = zone_size[0]; + for_each_nodebank(i, mi, node) + zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT; + + /* + * Adjust the sizes according to any special requirements for + * this machine type. + */ + arch_adjust_zones(node, zone_size, zhole_size); + + free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size); + + return end_pfn; } -/* - * paging_init() sets up the page tables, initialises the zone memory - * maps, and sets up the zero page, bad page and bad page tables. - */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +static void __init bootmem_init(struct meminfo *mi) { - void *zero_page; - int node; + unsigned long addr, memend_pfn = 0; + int node, initrd_node, i; - bootmem_init(mi); + /* + * Invalidate the node number for empty or invalid memory banks + */ + for (i = 0; i < mi->nr_banks; i++) + if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES) + mi->bank[i].node = -1; memcpy(&meminfo, mi, sizeof(meminfo)); +#ifdef CONFIG_XIP_KERNEL +#error needs fixing + p->pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK); + p->virtual = (unsigned long)&_stext & PMD_MASK; + p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK; + p->type = MT_ROM; + p ++; +#endif + /* - * allocate the zero page. Note that we count on this going ok. + * Clear out all the mappings below the kernel image. + * FIXME: what about XIP? */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); /* - * initialise the page tables. + * Clear out all the kernel space mappings, except for the first + * memory bank, up to the end of the vmalloc region. */ - memtable_init(mi); - if (mdesc->map_io) - mdesc->map_io(); - local_flush_tlb_all(); + for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); + addr < VMALLOC_END; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); /* - * initialise the zones within each node + * Locate which node contains the ramdisk image, if any. */ - for_each_online_node(node) { - unsigned long zone_size[MAX_NR_ZONES]; - unsigned long zhole_size[MAX_NR_ZONES]; - struct bootmem_data *bdata; - pg_data_t *pgdat; - int i; + initrd_node = check_initrd(mi); - /* - * Initialise the zone size information. - */ - for (i = 0; i < MAX_NR_ZONES; i++) { - zone_size[i] = 0; - zhole_size[i] = 0; - } + /* + * Run through each node initialising the bootmem allocator. + */ + for_each_node(node) { + unsigned long end_pfn; - pgdat = NODE_DATA(node); - bdata = pgdat->bdata; + end_pfn = bootmem_init_node(node, initrd_node, mi); /* - * The size of this node has already been determined. - * If we need to do anything fancy with the allocation - * of this memory to the zones, now is the time to do - * it. + * Remember the highest memory PFN. */ - zone_size[0] = bdata->node_low_pfn - - (bdata->node_boot_start >> PAGE_SHIFT); + if (end_pfn > memend_pfn) + memend_pfn = end_pfn; + } - /* - * If this zone has zero size, skip it. - */ - if (!zone_size[0]) - continue; + high_memory = __va(memend_pfn << PAGE_SHIFT); - /* - * For each bank in this node, calculate the size of the - * holes. holes = node_size - sum(bank_sizes_in_node) - */ - zhole_size[0] = zone_size[0]; - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].node != node) - continue; + /* + * This doesn't seem to be used by the Linux memory manager any + * more, but is used by ll_rw_block. If we can get rid of it, we + * also get rid of some of the stuff above as well. + * + * Note: max_low_pfn and max_pfn reflect the number of _pages_ in + * the system, not the maximum PFN. + */ + max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; +} - zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT; - } +/* + * Set up device the mappings. Since we clear out the page tables for all + * mappings above VMALLOC_END, we will remove any debug device mappings. + * This means you have to be careful how you debug this function, or any + * called function. (Do it by code inspection!) + */ +static void __init devicemaps_init(struct machine_desc *mdesc) +{ + struct map_desc map; + unsigned long addr; + void *vectors; - /* - * Adjust the sizes according to any special - * requirements for this machine type. - */ - arch_adjust_zones(node, zone_size, zhole_size); + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); - free_area_init_node(node, pgdat, zone_size, - bdata->node_boot_start >> PAGE_SHIFT, zhole_size); + /* + * Map the cache flushing regions. + */ +#ifdef FLUSH_BASE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); + map.virtual = FLUSH_BASE; + map.length = PGDIR_SIZE; + map.type = MT_CACHECLEAN; + create_mapping(&map); +#endif +#ifdef FLUSH_BASE_MINICACHE + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE); + map.virtual = FLUSH_BASE_MINICACHE; + map.length = PGDIR_SIZE; + map.type = MT_MINICLEAN; + create_mapping(&map); +#endif + + flush_cache_all(); + local_flush_tlb_all(); + + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + + /* + * Create a mapping for the machine vectors at the high-vectors + * location (0xffff0000). If we aren't using high-vectors, also + * create a mapping at the low-vectors virtual address. + */ + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); + map.virtual = 0xffff0000; + map.length = PAGE_SIZE; + map.type = MT_HIGH_VECTORS; + create_mapping(&map); + + if (!vectors_high()) { + map.virtual = 0; + map.type = MT_LOW_VECTORS; + create_mapping(&map); } /* - * finish off the bad pages once - * the mem_map is initialised + * Ask the machine support to map in the statically mapped devices. + * After this point, we can start to touch devices again. + */ + if (mdesc->map_io) + mdesc->map_io(); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + void *zero_page; + + build_mem_type_table(); + bootmem_init(mi); + devicemaps_init(mdesc); + + top_pmd = pmd_off_k(0xffff0000); + + /* + * allocate the zero page. Note that we count on this going ok. */ + zero_page = alloc_bootmem_low_pages(PAGE_SIZE); memzero(zero_page, PAGE_SIZE); empty_zero_page = virt_to_page(zero_page); flush_dcache_page(empty_zero_page); @@ -562,10 +563,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) * may not be the case, especially if the user has provided the * information on the command line. */ - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0 || mi->bank[i].node != node) - continue; - + for_each_nodebank(i, mi, node) { bank_start = mi->bank[i].start >> PAGE_SHIFT; if (bank_start < prev_bank_end) { printk(KERN_ERR "MEM: unordered memory banks. " diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 7110e54182b1..6fb1258df1b5 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,6 +26,7 @@ #include <linux/vmalloc.h> #include <asm/cacheflush.h> +#include <asm/hardware.h> #include <asm/io.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index d125a3dc061c..61bc2fa0511e 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mm/mm-armv.c * - * Copyright (C) 1998-2002 Russell King + * Copyright (C) 1998-2005 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -305,16 +305,6 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); } -/* - * Clear any PGD mapping. On a two-level page table system, - * the clearance is done by the middle-level functions (pmd) - * rather than the top-level (pgd) functions. - */ -static inline void clear_mapping(unsigned long virt) -{ - pmd_clear(pmd_off_k(virt)); -} - struct mem_types { unsigned int prot_pte; unsigned int prot_l1; @@ -373,7 +363,7 @@ static struct mem_types mem_types[] __initdata = { /* * Adjust the PMD section entries according to the CPU in use. */ -static void __init build_mem_type_table(void) +void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); @@ -483,25 +473,25 @@ static void __init build_mem_type_table(void) * offsets, and we take full advantage of sections and * supersections. */ -static void __init create_mapping(struct map_desc *md) +void __init create_mapping(struct map_desc *md) { unsigned long virt, length; int prot_sect, prot_l1, domain; pgprot_t prot_pte; - long off; + unsigned long off = (u32)__pfn_to_phys(md->pfn); if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08lx at 0x%08lx in user region\n", - md->physical, md->virtual); + "0x%016llx at 0x%08lx in user region\n", + __pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx " + printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx " "overlaps vmalloc space\n", - md->physical, md->virtual); + __pfn_to_phys((u64)md->pfn), md->virtual); } domain = mem_types[md->type].domain; @@ -509,15 +499,40 @@ static void __init create_mapping(struct map_desc *md) prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain); prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); + /* + * Catch 36-bit addresses + */ + if(md->pfn >= 0x100000) { + if(domain) { + printk(KERN_ERR "MM: invalid domain in supersection " + "mapping for 0x%016llx at 0x%08lx\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + if((md->virtual | md->length | __pfn_to_phys(md->pfn)) + & ~SUPERSECTION_MASK) { + printk(KERN_ERR "MM: cannot create mapping for " + "0x%016llx at 0x%08lx invalid alignment\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + /* + * Shift bits [35:32] of address into bits [23:20] of PMD + * (See ARMv6 spec). + */ + off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); + } + virt = md->virtual; - off = md->physical - virt; + off -= virt; length = md->length; if (mem_types[md->type].prot_l1 == 0 && (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) { printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " "be mapped using pages, ignoring.\n", - md->physical, md->virtual); + __pfn_to_phys(md->pfn), md->virtual); return; } @@ -535,13 +550,22 @@ static void __init create_mapping(struct map_desc *md) * of the actual domain assignments in use. */ if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) { - /* Align to supersection boundary */ - while ((virt & ~SUPERSECTION_MASK || (virt + off) & - ~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) { - alloc_init_section(virt, virt + off, prot_sect); - - virt += (PGDIR_SIZE / 2); - length -= (PGDIR_SIZE / 2); + /* + * Align to supersection boundary if !high pages. + * High pages have already been checked for proper + * alignment above and they will fail the SUPSERSECTION_MASK + * check because of the way the address is encoded into + * offset. + */ + if (md->pfn <= 0x100000) { + while ((virt & ~SUPERSECTION_MASK || + (virt + off) & ~SUPERSECTION_MASK) && + length >= (PGDIR_SIZE / 2)) { + alloc_init_section(virt, virt + off, prot_sect); + + virt += (PGDIR_SIZE / 2); + length -= (PGDIR_SIZE / 2); + } } while (length >= SUPERSECTION_SIZE) { @@ -601,100 +625,6 @@ void setup_mm_for_reboot(char mode) } } -extern void _stext, _etext; - -/* - * Setup initial mappings. We use the page we allocated for zero page to hold - * the mappings, which will get overwritten by the vectors in traps_init(). - * The mappings must be in virtual address order. - */ -void __init memtable_init(struct meminfo *mi) -{ - struct map_desc *init_maps, *p, *q; - unsigned long address = 0; - int i; - - build_mem_type_table(); - - init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE); - -#ifdef CONFIG_XIP_KERNEL - p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK; - p->virtual = (unsigned long)&_stext & PMD_MASK; - p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK; - p->type = MT_ROM; - p ++; -#endif - - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0) - continue; - - p->physical = mi->bank[i].start; - p->virtual = __phys_to_virt(p->physical); - p->length = mi->bank[i].size; - p->type = MT_MEMORY; - p ++; - } - -#ifdef FLUSH_BASE - p->physical = FLUSH_BASE_PHYS; - p->virtual = FLUSH_BASE; - p->length = PGDIR_SIZE; - p->type = MT_CACHECLEAN; - p ++; -#endif - -#ifdef FLUSH_BASE_MINICACHE - p->physical = FLUSH_BASE_PHYS + PGDIR_SIZE; - p->virtual = FLUSH_BASE_MINICACHE; - p->length = PGDIR_SIZE; - p->type = MT_MINICLEAN; - p ++; -#endif - - /* - * Go through the initial mappings, but clear out any - * pgdir entries that are not in the description. - */ - q = init_maps; - do { - if (address < q->virtual || q == p) { - clear_mapping(address); - address += PGDIR_SIZE; - } else { - create_mapping(q); - - address = q->virtual + q->length; - address = (address + PGDIR_SIZE - 1) & PGDIR_MASK; - - q ++; - } - } while (address != 0); - - /* - * Create a mapping for the machine vectors at the high-vectors - * location (0xffff0000). If we aren't using high-vectors, also - * create a mapping at the low-vectors virtual address. - */ - init_maps->physical = virt_to_phys(init_maps); - init_maps->virtual = 0xffff0000; - init_maps->length = PAGE_SIZE; - init_maps->type = MT_HIGH_VECTORS; - create_mapping(init_maps); - - if (!vectors_high()) { - init_maps->virtual = 0; - init_maps->type = MT_LOW_VECTORS; - create_mapping(init_maps); - } - - flush_cache_all(); - local_flush_tlb_all(); - - top_pmd = pmd_off_k(0xffff0000); -} - /* * Create the architecture specific mappings */ diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index 8ffb523e6c77..6a94e54848fd 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o backtrace.o -oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o +oprofile-y := $(DRIVER_OBJS) common.o backtrace.o +oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index e57dde882898..1415930ceee1 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,74 +10,23 @@ #include <linux/init.h> #include <linux/oprofile.h> #include <linux/errno.h> -#include <asm/semaphore.h> #include <linux/sysdev.h> +#include <asm/semaphore.h> #include "op_counter.h" #include "op_arm_model.h" -static struct op_arm_model_spec *pmu_model; -static int pmu_enabled; -static struct semaphore pmu_sem; - -static int pmu_start(void); -static int pmu_setup(void); -static void pmu_stop(void); -static int pmu_create_files(struct super_block *, struct dentry *); - -#ifdef CONFIG_PM -static int pmu_suspend(struct sys_device *dev, pm_message_t state) -{ - if (pmu_enabled) - pmu_stop(); - return 0; -} - -static int pmu_resume(struct sys_device *dev) -{ - if (pmu_enabled) - pmu_start(); - return 0; -} - -static struct sysdev_class oprofile_sysclass = { - set_kset_name("oprofile"), - .resume = pmu_resume, - .suspend = pmu_suspend, -}; - -static struct sys_device device_oprofile = { - .id = 0, - .cls = &oprofile_sysclass, -}; - -static int __init init_driverfs(void) -{ - int ret; - - if (!(ret = sysdev_class_register(&oprofile_sysclass))) - ret = sysdev_register(&device_oprofile); - - return ret; -} - -static void exit_driverfs(void) -{ - sysdev_unregister(&device_oprofile); - sysdev_class_unregister(&oprofile_sysclass); -} -#else -#define init_driverfs() do { } while (0) -#define exit_driverfs() do { } while (0) -#endif /* CONFIG_PM */ +static struct op_arm_model_spec *op_arm_model; +static int op_arm_enabled; +static struct semaphore op_arm_sem; struct op_counter_config counter_config[OP_MAX_COUNTER]; -static int pmu_create_files(struct super_block *sb, struct dentry *root) +static int op_arm_create_files(struct super_block *sb, struct dentry *root) { unsigned int i; - for (i = 0; i < pmu_model->num_counters; i++) { + for (i = 0; i < op_arm_model->num_counters; i++) { struct dentry *dir; char buf[2]; @@ -94,63 +43,123 @@ static int pmu_create_files(struct super_block *sb, struct dentry *root) return 0; } -static int pmu_setup(void) +static int op_arm_setup(void) { int ret; spin_lock(&oprofilefs_lock); - ret = pmu_model->setup_ctrs(); + ret = op_arm_model->setup_ctrs(); spin_unlock(&oprofilefs_lock); return ret; } -static int pmu_start(void) +static int op_arm_start(void) { int ret = -EBUSY; - down(&pmu_sem); - if (!pmu_enabled) { - ret = pmu_model->start(); - pmu_enabled = !ret; + down(&op_arm_sem); + if (!op_arm_enabled) { + ret = op_arm_model->start(); + op_arm_enabled = !ret; } - up(&pmu_sem); + up(&op_arm_sem); return ret; } -static void pmu_stop(void) +static void op_arm_stop(void) +{ + down(&op_arm_sem); + if (op_arm_enabled) + op_arm_model->stop(); + op_arm_enabled = 0; + up(&op_arm_sem); +} + +#ifdef CONFIG_PM +static int op_arm_suspend(struct sys_device *dev, pm_message_t state) { - down(&pmu_sem); - if (pmu_enabled) - pmu_model->stop(); - pmu_enabled = 0; - up(&pmu_sem); + down(&op_arm_sem); + if (op_arm_enabled) + op_arm_model->stop(); + up(&op_arm_sem); + return 0; } -int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec) +static int op_arm_resume(struct sys_device *dev) { - init_MUTEX(&pmu_sem); + down(&op_arm_sem); + if (op_arm_enabled && op_arm_model->start()) + op_arm_enabled = 0; + up(&op_arm_sem); + return 0; +} + +static struct sysdev_class oprofile_sysclass = { + set_kset_name("oprofile"), + .resume = op_arm_resume, + .suspend = op_arm_suspend, +}; - if (spec->init() < 0) - return -ENODEV; +static struct sys_device device_oprofile = { + .id = 0, + .cls = &oprofile_sysclass, +}; - pmu_model = spec; - init_driverfs(); - ops->create_files = pmu_create_files; - ops->setup = pmu_setup; - ops->shutdown = pmu_stop; - ops->start = pmu_start; - ops->stop = pmu_stop; - ops->cpu_type = pmu_model->name; - printk(KERN_INFO "oprofile: using %s PMU\n", spec->name); +static int __init init_driverfs(void) +{ + int ret; - return 0; + if (!(ret = sysdev_class_register(&oprofile_sysclass))) + ret = sysdev_register(&device_oprofile); + + return ret; +} + +static void exit_driverfs(void) +{ + sysdev_unregister(&device_oprofile); + sysdev_class_unregister(&oprofile_sysclass); +} +#else +#define init_driverfs() do { } while (0) +#define exit_driverfs() do { } while (0) +#endif /* CONFIG_PM */ + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + struct op_arm_model_spec *spec = NULL; + int ret = -ENODEV; + +#ifdef CONFIG_CPU_XSCALE + spec = &op_xscale_spec; +#endif + + if (spec) { + init_MUTEX(&op_arm_sem); + + if (spec->init() < 0) + return -ENODEV; + + op_arm_model = spec; + init_driverfs(); + ops->create_files = op_arm_create_files; + ops->setup = op_arm_setup; + ops->shutdown = op_arm_stop; + ops->start = op_arm_start; + ops->stop = op_arm_stop; + ops->cpu_type = op_arm_model->name; + ops->backtrace = arm_backtrace; + printk(KERN_INFO "oprofile: using %s\n", spec->name); + } + + return ret; } -void pmu_exit(void) +void oprofile_arch_exit(void) { - if (pmu_model) { + if (op_arm_model) { exit_driverfs(); - pmu_model = NULL; + op_arm_model = NULL; } } diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c deleted file mode 100644 index d315a3a86c86..000000000000 --- a/arch/arm/oprofile/init.c +++ /dev/null @@ -1,33 +0,0 @@ -/** - * @file init.c - * - * @remark Copyright 2004 Oprofile Authors - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/errno.h> -#include "op_arm_model.h" - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - int ret = -ENODEV; - -#ifdef CONFIG_CPU_XSCALE - ret = pmu_init(ops, &op_xscale_spec); -#endif - - ops->backtrace = arm_backtrace; - - return ret; -} - -void oprofile_arch_exit(void) -{ -#ifdef CONFIG_CPU_XSCALE - pmu_exit(); -#endif -} diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h index 2148d07484b7..38c6ad158547 100644 --- a/arch/arm/oprofile/op_arm_model.h +++ b/arch/arm/oprofile/op_arm_model.h @@ -26,6 +26,6 @@ extern struct op_arm_model_spec op_xscale_spec; extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); -extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); -extern void pmu_exit(void); +extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); +extern void op_arm_exit(void); #endif /* OP_ARM_MODEL_H */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 7719a4062e3a..7ad69f14a3e7 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -59,7 +59,11 @@ void __init omap_detect_sram(void) } static struct map_desc omap_sram_io_desc[] __initdata = { - { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE } + { /* .length gets filled in at runtime */ + .virtual = OMAP1_SRAM_BASE, + .pfn = __phys_to_pfn(OMAP1_SRAM_START), + .type = MT_DEVICE + } }; /* diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index 819895cf0b9e..2082a9647f4f 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -33,7 +33,7 @@ struct dma_alloc_record { static DEFINE_SPINLOCK(dma_alloc_lock); static LIST_HEAD(dma_alloc_list); -void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp) +void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { struct dma_alloc_record *new; struct list_head *this = &dma_alloc_list; diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c index 27eb12066507..86fbdadc51b6 100644 --- a/arch/frv/mb93090-mb00/pci-dma.c +++ b/arch/frv/mb93090-mb00/pci-dma.c @@ -17,7 +17,7 @@ #include <linux/highmem.h> #include <asm/io.h> -void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp) +void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { void *ret; diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c index 4b38d45435f6..cfc4f97490c6 100644 --- a/arch/frv/mm/dma-alloc.c +++ b/arch/frv/mm/dma-alloc.c @@ -81,7 +81,7 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot) * portions of the kernel with single large page TLB entries, and * still get unique uncached pages for consistent DMA. */ -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) +void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) { struct vm_struct *area; unsigned long page, va, pa; diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 4647db4ad6de..13bae799e626 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i) int err = 0; struct class_device *class_err; - class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); + class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 03100d6fc5d6..44470fea4309 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -246,7 +246,7 @@ static int msr_class_device_create(int i) int err = 0; struct class_device *class_err; - class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); + class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 8e8e895e1b5a..330fd2b68075 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -2,6 +2,8 @@ * Exceptions for specific devices. Usually work-arounds for fatal design flaws. */ +#include <linux/delay.h> +#include <linux/dmi.h> #include <linux/pci.h> #include <linux/init.h> #include "pci.h" @@ -384,3 +386,60 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev) } } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); + +/* + * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. + * + * We pretend to bring them out of full D3 state, and restore the proper + * IRQ, PCI cache line size, and BARs, otherwise the device won't function + * properly. In some cases, the device will generate an interrupt on + * the wrong IRQ line, causing any devices sharing the the line it's + * *supposed* to use to be disabled by the kernel's IRQ debug code. + */ +static u16 toshiba_line_size; + +static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = { + { + .ident = "Toshiba PS5 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), + }, + }, + { + .ident = "Toshiba PSM4 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), + }, + }, + { } +}; + +static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + dev->current_state = PCI_D3cold; + pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, + pci_pre_fixup_toshiba_ohci1394); + +static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + /* Restore config space on Toshiba laptops */ + mdelay(10); + pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); + pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + pci_resource_start(dev, 0)); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, + pci_resource_start(dev, 1)); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, + pci_post_fixup_toshiba_ohci1394); diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 317c334c5a18..a5a5637507be 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -80,7 +80,7 @@ hwsw_init (void) } void * -hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags) +hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) { if (use_swiotlb(dev)) return swiotlb_alloc_coherent(dev, size, dma_handle, flags); diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index e64ca04ace89..bdccd0b1eb60 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1076,7 +1076,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir) * See Documentation/DMA-mapping.txt */ void * -sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags) +sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) { struct ioc *ioc; void *addr; diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index 48e5ff26eb1d..96edcc0fdcd9 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -416,7 +416,7 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir) void * swiotlb_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, int flags) + dma_addr_t *dma_handle, gfp_t flags) { unsigned long dev_addr; void *ret; diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index 33df1b3758b6..fbcedc7c27fa 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -1221,7 +1221,7 @@ xpc_map_bte_errors(bte_result_t error) static inline void * -xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base) +xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) { /* see if kmalloc will give us cachline aligned memory by default */ *base = kmalloc(size, flags); diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index abdf6eea6ac8..9bf9f23b9a1f 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_dma_set_mask); * more information. */ void *sn_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int flags) + dma_addr_t * dma_handle, gfp_t flags) { void *cpuaddr; unsigned long phys_addr; diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c index 97a50d38c98f..a617f8c327e8 100644 --- a/arch/mips/mm/dma-coherent.c +++ b/arch/mips/mm/dma-coherent.c @@ -18,7 +18,7 @@ #include <asm/io.h> void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; /* ignore region specifiers */ @@ -39,7 +39,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) __attribute__((alias("dma_alloc_noncoherent"))); EXPORT_SYMBOL(dma_alloc_coherent); diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c index aa7c94b5d781..8da19fd22ac6 100644 --- a/arch/mips/mm/dma-ip27.c +++ b/arch/mips/mm/dma-ip27.c @@ -22,7 +22,7 @@ pdev_to_baddr(to_pci_dev(dev), (addr)) void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; @@ -44,7 +44,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) __attribute__((alias("dma_alloc_noncoherent"))); EXPORT_SYMBOL(dma_alloc_coherent); diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c index 2cbe196c35fb..a7e3072ff78d 100644 --- a/arch/mips/mm/dma-ip32.c +++ b/arch/mips/mm/dma-ip32.c @@ -37,7 +37,7 @@ #define RAM_OFFSET_MASK 0x3fffffff void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; /* ignore region specifiers */ @@ -61,7 +61,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index 59e54f12212e..4ce02028a292 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -24,7 +24,7 @@ */ void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; /* ignore region specifiers */ @@ -45,7 +45,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 0b07922a2ac6..874a283edb95 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,10 +47,10 @@ config PM config ISA_DMA_API bool - default y config ARCH_MAY_HAVE_PC_FDC bool + depends on BROKEN default y source "init/Kconfig" @@ -154,13 +154,14 @@ config HOTPLUG_CPU config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous memory support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on 64BIT && EXPERIMENTAL help Say Y to support efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "kernel/Kconfig.hz" source "mm/Kconfig" config PREEMPT diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 3b339b1cce13..9b7e42490dd1 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -20,7 +20,8 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 ifdef CONFIG_64BIT -CROSS_COMPILE := hppa64-linux- +CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \ + echo hppa64-linux-gnu-; else echo hppa64-linux-; fi) UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 else @@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align OBJCOPY_FLAGS =-O binary -R .note -R .comment -S +GCC_VERSION := $(call cc-version) +ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),) +$(error Sorry, couldn't find ($(cc-version)).) +endif +ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),) +$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.) +endif + cflags-y := -pipe # These flags should be implied by an hppa-linux configuration, but they @@ -43,7 +52,7 @@ cflags-y += -mno-space-regs -mfast-indirect-calls # Currently we save and restore fpregs on all kernel entry/interruption paths. # If that gets optimized, we might need to disable the use of fpregs in the # kernel. -#cflags-y += -mdisable-fpregs +cflags-y += -mdisable-fpregs # Without this, "ld -r" results in .text sections that are too big # (> 0x40000) for branches to reach stubs. diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 6efaa9293eef..3e013f55df64 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:20:32 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:34 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,9 +74,18 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y # CONFIG_GSC_WAX is not set # CONFIG_EISA is not set # CONFIG_PCI is not set -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # # -# PCI Hotplug Support +# PA-RISC specific drivers # +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y -CONFIG_53C700_LE_ON_BE=y -# CONFIG_SCSI_ZALON is not set -CONFIG_SCSI_DEBUG=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -243,12 +132,14 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -262,8 +153,10 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration @@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -279,11 +173,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_CT_ACCT is not set CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -# CONFIG_IP_NF_NAT_LOCAL is not set CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m @@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_XFRM=y -CONFIG_XFRM_USER=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) @@ -362,10 +263,6 @@ CONFIG_LLC2=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -373,17 +270,162 @@ CONFIG_LLC2=m # Network testing # CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_ZALON is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -391,6 +433,7 @@ CONFIG_TUN=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y # # CONFIG_STRIP is not set # CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Wan interfaces @@ -431,6 +475,8 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -460,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y @@ -494,6 +528,19 @@ CONFIG_MOUSE_HIL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -546,12 +592,14 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -562,10 +610,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=128 CONFIG_DUMMY_CONSOLE_ROWS=48 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -610,6 +676,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -657,10 +724,6 @@ CONFIG_SND_HARMONY=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -671,10 +734,20 @@ CONFIG_SND_HARMONY=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -682,20 +755,24 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -# CONFIG_TMPFS_SECURITY is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -754,16 +828,19 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -778,6 +855,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -838,13 +916,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -882,9 +967,14 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index 30fc03ed0cfb..955ef5084f3e 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4-pa1 -# Wed Feb 16 11:32:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:54 2005 # CONFIG_PARISC=y CONFIG_MMU=y @@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -74,7 +82,19 @@ CONFIG_PREFETCH=y CONFIG_64BIT=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y @@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -104,7 +126,6 @@ CONFIG_CARDBUS=y CONFIG_YENTA=m CONFIG_PD6729=m CONFIG_I82092=m -CONFIG_TCIC=m CONFIG_PCCARD_NONSTATIC=m # @@ -127,6 +148,203 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +# CONFIG_IP6_NF_MATCH_OWNER is not set +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +# CONFIG_IP6_NF_MATCH_LENGTH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -139,6 +357,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers @@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set @@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA22XX is not set CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -303,153 +529,13 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration +# Network device support # -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -457,12 +543,18 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m @@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set CONFIG_PCMCIA_XIRCOM=m # CONFIG_PCMCIA_XIRTULIP is not set CONFIG_HP100=m @@ -489,48 +582,43 @@ CONFIG_PCNET32=m # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m +# CONFIG_EEPRO100 is not set CONFIG_E100=m -CONFIG_E100_NAPI=y # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set -CONFIG_EPIC100=m +# CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m +# CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=m -CONFIG_IXGB_NAPI=y -CONFIG_S2IO=m -CONFIG_S2IO_NAPI=y -# CONFIG_2BUFF_MODE is not set +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices @@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=m # CONFIG_ATMEL is not set @@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m @@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -633,13 +726,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -649,6 +735,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set @@ -708,6 +800,11 @@ CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -718,10 +815,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 +# CONFIG_STI_CONSOLE is not set # # Sound @@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # InfiniBand support # -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -794,22 +899,20 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -867,15 +968,18 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -890,6 +994,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m +# CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set -CONFIG_NLS_CODEPAGE_863=m +# CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set -CONFIG_NLS_CODEPAGE_865=m +# CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set @@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set @@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_IOREMAP is not set @@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m @@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 46c9511f3229..8819e7e6ae3f 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:35:54 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:10 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options @@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_EXPERIMENTAL is not set CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -60,8 +69,14 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# PA-RISC specific drivers +# CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -91,6 +120,64 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -99,9 +186,15 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -111,10 +204,8 @@ CONFIG_STANDALONE=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=y # # ATA/ATAPI/MFM/RLL support @@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set @@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -347,6 +388,11 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_LASI_82596 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -369,6 +415,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set @@ -384,12 +431,15 @@ CONFIG_TULIP=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -435,6 +485,8 @@ CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -464,23 +516,12 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -# CONFIG_HP_SDC is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set @@ -502,6 +543,19 @@ CONFIG_INPUT_MISC=y # CONFIG_HP_SDC_RTC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +# CONFIG_HP_SDC is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -555,11 +613,14 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -570,10 +631,20 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -595,6 +671,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -606,18 +683,19 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -658,23 +733,36 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -697,11 +785,10 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -719,15 +806,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -815,6 +912,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -832,8 +930,13 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_TEST is not set # +# Hardware crypto devices +# + +# # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index 67aca6ccc9b0..9d86b6b1ebd1 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:26:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:31 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -66,10 +76,19 @@ CONFIG_KMOD=y CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y -# CONFIG_PARISC64 is not set # CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -79,13 +98,10 @@ CONFIG_PREFETCH=y # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y -CONFIG_SUPERIO=y -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # +# CONFIG_HOTPLUG_PCI is not set # -# PCI Hotplug Support +# PA-RISC specific drivers # -# CONFIG_HOTPLUG_PCI is not set +CONFIG_SUPERIO=y +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -108,6 +128,186 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +CONFIG_NETFILTER_DEBUG=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +CONFIG_IP6_NF_MATCH_OWNER=m +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +CONFIG_IP6_NF_MATCH_LENGTH=m +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_RAW is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -120,6 +320,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=m +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set CONFIG_SCSI_SATA_PROMISE=m +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=m # CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set -CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA6322=m +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set -CONFIG_MD_MULTIPATH=y +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -342,151 +556,13 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_DEBUG=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -494,12 +570,18 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m -CONFIG_HAPPYMEAL=m +# CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y -CONFIG_PCNET32=m +# CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set -CONFIG_ADAPTEC_STARFIRE=m -# CONFIG_ADAPTEC_STARFIRE_NAPI is not set -CONFIG_B44=m +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set +# CONFIG_EEPRO100 is not set CONFIG_E100=m -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -554,15 +630,18 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=y -CONFIG_IXGB_NAPI=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set # CONFIG_S2IO is not set # @@ -593,6 +672,8 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -622,16 +703,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -649,6 +720,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,12 +779,16 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -714,10 +799,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -739,6 +839,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -751,18 +852,20 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -775,6 +878,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -784,7 +888,78 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set # # Open Sound System @@ -794,6 +969,8 @@ CONFIG_SOUND=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m @@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y +CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y @@ -846,21 +1022,25 @@ CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -CONFIG_USB_KBTAB=m +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices @@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m @@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -920,27 +1102,41 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -996,16 +1190,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_HMAC is not set CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set @@ -1117,9 +1322,14 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index fdae21c503d7..f38a4620d24f 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,38 +1,56 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:01:33 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y CONFIG_PA7000=y # CONFIG_PA7100LC is not set # CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# PA-RISC specific drivers +# CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y CONFIG_PDC_CHASSIS=y +CONFIG_PDC_STABLE=y # # Executable file formats @@ -81,15 +125,97 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set CONFIG_SCSI_ZALON=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_LASI_82596=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set @@ -336,6 +430,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -361,30 +456,37 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # -# CONFIG_ACENIC is not set -CONFIG_DL2K=y +CONFIG_ACENIC=y +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -CONFIG_AIRO=y # CONFIG_HERMES is not set # CONFIG_ATMEL is not set -CONFIG_NET_WIRELESS=y # -# Token Ring devices +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -460,51 +554,67 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_PCIPS2 is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_HIL is not set CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDDLER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set -# CONFIG_INPUT_JOYDUMP is not set +# CONFIG_JOYSTICK_JOYDUMP is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_UINPUT is not set CONFIG_HP_SDC_RTC=y # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_MUX is not set -# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_MUX=y +CONFIG_SERIAL_MUX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -541,12 +651,6 @@ CONFIG_PRINTER=y # CONFIG_TIPAR is not set # -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# # IPMI # # CONFIG_IPMI_HANDLER is not set @@ -555,7 +659,6 @@ CONFIG_PRINTER=y # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -565,21 +668,40 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set # +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y # Logo configuration # # CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -638,17 +772,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# GSC devices +# +CONFIG_SND_HARMONY=y # # Open Sound System # # CONFIG_SOUND_PRIME is not set -# CONFIG_SOUND_HARMONY is not set # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# # CONFIG_USB_STORAGE is not set # -# USB Human Interface Devices (HID) +# USB Input Devices # # CONFIG_USB_HID is not set @@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y # # -# USB Network adaptors +# USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y # # USB port drivers @@ -732,12 +962,21 @@ CONFIG_USB_OHCI_HCD=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# # # USB Gadget Support @@ -745,22 +984,41 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -773,7 +1031,8 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -781,11 +1040,11 @@ CONFIG_JOLIET=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -809,23 +1068,28 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_RWLOCK is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # +# Hardware crypto devices +# + +# # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index f46a07a79218..e15f09eaed12 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -27,6 +27,7 @@ #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/processor.h> +#include <asm/sections.h> int split_tlb; int dcache_stride; @@ -207,6 +208,9 @@ parisc_cache_init(void) /* "New and Improved" version from Jim Hull * (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift)) + * The following CAFL_STRIDE is an optimized version, see + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html */ #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift)) dcache_stride = CAFL_STRIDE(cache_info.dc_conf); @@ -339,17 +343,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD; void parisc_setup_cache_timing(void) { unsigned long rangetime, alltime; - extern char _text; /* start of kernel code, defined by linker */ - extern char _end; /* end of BSS, defined by linker */ unsigned long size; alltime = mfctl(16); flush_data_cache(); alltime = mfctl(16) - alltime; - size = (unsigned long)(&_end - _text); + size = (unsigned long)(_end - _text); rangetime = mfctl(16); - flush_kernel_dcache_range((unsigned long)&_text, size); + flush_kernel_dcache_range((unsigned long)_text, size); rangetime = mfctl(16) - rangetime; printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n", diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index d34bbe7ae0e3..988844a169e6 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -46,36 +46,51 @@ static struct device root = { .bus_id = "parisc", }; -#define for_each_padev(padev) \ - for (padev = next_dev(&root); padev != NULL; \ - padev = next_dev(&padev->dev)) +static inline int check_dev(struct device *dev) +{ + if (dev->bus == &parisc_bus_type) { + struct parisc_device *pdev; + pdev = to_parisc_device(dev); + return pdev->id.hw_type != HPHW_FAULTY; + } + return 1; +} + +static struct device * +parse_tree_node(struct device *parent, int index, struct hardware_path *modpath); -#define check_dev(padev) \ - (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev) +struct recurse_struct { + void * obj; + int (*fn)(struct device *, void *); +}; + +static int descend_children(struct device * dev, void * data) +{ + struct recurse_struct * recurse_data = (struct recurse_struct *)data; + + if (recurse_data->fn(dev, recurse_data->obj)) + return 1; + else + return device_for_each_child(dev, recurse_data, descend_children); +} /** - * next_dev - enumerates registered devices - * @dev: the previous device returned from next_dev + * for_each_padev - Iterate over all devices in the tree + * @fn: Function to call for each device. + * @data: Data to pass to the called function. * - * next_dev does a depth-first search of the tree, returning parents - * before children. Returns NULL when there are no more devices. + * This performs a depth-first traversal of the tree, calling the + * function passed for each node. It calls the function for parents + * before children. */ -static struct parisc_device *next_dev(struct device *dev) -{ - if (!list_empty(&dev->children)) { - dev = list_to_dev(dev->children.next); - return check_dev(to_parisc_device(dev)); - } - while (dev != &root) { - if (dev->node.next != &dev->parent->children) { - dev = list_to_dev(dev->node.next); - return to_parisc_device(dev); - } - dev = dev->parent; - } - - return NULL; +static int for_each_padev(int (*fn)(struct device *, void *), void * data) +{ + struct recurse_struct recurse_data = { + .obj = data, + .fn = fn, + }; + return device_for_each_child(&root, &recurse_data, descend_children); } /** @@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev) return 0; } -static void claim_device(struct parisc_driver *driver, struct parisc_device *dev) -{ - dev->driver = driver; - request_mem_region(dev->hpa, 0x1000, driver->name); -} - static int parisc_driver_probe(struct device *dev) { int rc; @@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev) rc = pa_drv->probe(pa_dev); - if(!rc) - claim_device(pa_drv, pa_dev); + if (!rc) + pa_dev->driver = pa_drv; return rc; } @@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev) struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); if (pa_drv->remove) pa_drv->remove(pa_dev); - release_mem_region(pa_dev->hpa, 0x1000); return 0; } @@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(register_parisc_driver); + +struct match_count { + struct parisc_driver * driver; + int count; +}; + +static int match_and_count(struct device * dev, void * data) +{ + struct match_count * m = data; + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) { + if (match_device(m->driver, pdev)) + m->count++; + } + return 0; +} + /** * count_parisc_driver - count # of devices this driver would match * @driver: the PA-RISC driver to try @@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver); */ int count_parisc_driver(struct parisc_driver *driver) { - struct parisc_device *device; - int cnt = 0; + struct match_count m = { + .driver = driver, + .count = 0, + }; - for_each_padev(device) { - if (match_device(driver, device)) - cnt++; - } + for_each_padev(match_and_count, &m); - return cnt; + return m.count; } @@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(unregister_parisc_driver); -static struct parisc_device *find_device_by_addr(unsigned long hpa) +struct find_data { + unsigned long hpa; + struct parisc_device * dev; +}; + +static int find_device(struct device * dev, void * data) { - struct parisc_device *dev; - for_each_padev(dev) { - if (dev->hpa == hpa) - return dev; + struct parisc_device * pdev = to_parisc_device(dev); + struct find_data * d = (struct find_data*)data; + + if (check_dev(dev)) { + if (pdev->hpa.start == d->hpa) { + d->dev = pdev; + return 1; + } } - return NULL; + return 0; +} + +static struct parisc_device *find_device_by_addr(unsigned long hpa) +{ + struct find_data d = { + .hpa = hpa, + }; + int ret; + + ret = for_each_padev(find_device, &d); + return ret ? d.dev : NULL; } /** @@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent) return dev; } +struct match_id_data { + char id; + struct parisc_device * dev; +}; + +static int match_by_id(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + struct match_id_data * d = data; + + if (pdev->hw_path == d->id) { + d->dev = pdev; + return 1; + } + return 0; +} + /** * alloc_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent) */ static struct parisc_device * alloc_tree_node(struct device *parent, char id) { - struct device *dev; - - list_for_each_entry(dev, &parent->children, node) { - struct parisc_device *padev = to_parisc_device(dev); - if (padev->hw_path == id) - return padev; - } - - return create_tree_node(id, parent); + struct match_id_data d = { + .id = id, + }; + if (device_for_each_child(parent, &d, match_by_id)) + return d.dev; + else + return create_tree_node(id, parent); } static struct parisc_device *create_parisc_device(struct hardware_path *modpath) @@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - char p[64]; - print_pa_hwpath(dev, p); printk("Two devices have hardware path %s. Please file a bug with HP.\n" - "In the meantime, you could try rearranging your cards.\n", p); + "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev)); return NULL; } @@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev->id.hversion_rev = iodc_data[1] & 0x0f; dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) | (iodc_data[5] << 8) | iodc_data[6]; - dev->hpa = hpa; + dev->hpa.name = parisc_pathname(dev); + dev->hpa.start = hpa; + if (hpa == 0xf4000000 || hpa == 0xf6000000 || + hpa == 0xf8000000 || hpa == 0xfa000000) { + dev->hpa.end = hpa + 0x01ffffff; + } else { + dev->hpa.end = hpa + 0xfff; + } + dev->hpa.flags = IORESOURCE_MEM; name = parisc_hardware_description(&dev->id); if (name) { strlcpy(dev->name, name, sizeof(dev->name)); } + /* Silently fail things like mouse ports which are subsumed within + * the keyboard controller + */ + if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) + printk("Unable to claim HPA %lx for device %s\n", + hpa, name); + return dev; } @@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index, return (curr->hw_path == id); } +struct parse_tree_data { + int index; + struct hardware_path * modpath; + struct device * dev; +}; + +static int check_parent(struct device * dev, void * data) +{ + struct parse_tree_data * d = data; + + if (check_dev(dev)) { + if (dev->bus == &parisc_bus_type) { + if (match_parisc_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (is_pci_dev(dev)) { + if (match_pci_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (dev->bus == NULL) { + /* we are on a bus bridge */ + struct device *new = parse_tree_node(dev, d->index, d->modpath); + if (new) + d->dev = new; + } + } + return d->dev != NULL; +} + /** * parse_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index, static struct device * parse_tree_node(struct device *parent, int index, struct hardware_path *modpath) { - struct device *device; - - list_for_each_entry(device, &parent->children, node) { - if (device->bus == &parisc_bus_type) { - if (match_parisc_device(device, index, modpath)) - return device; - } else if (is_pci_dev(device)) { - if (match_pci_device(device, index, modpath)) - return device; - } else if (device->bus == NULL) { - /* we are on a bus bridge */ - struct device *new = parse_tree_node(device, index, modpath); - if (new) - return new; - } - } + struct parse_tree_data d = { + .index = index, + .modpath = modpath, + }; - return NULL; + struct recurse_struct recurse_data = { + .obj = &d, + .fn = check_parent, + }; + + device_for_each_child(parent, &recurse_data, descend_children); + return d.dev; } /** @@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath); ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT)) #define IS_LOWER_PORT(dev) \ - ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \ + ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \ & BC_PORT_MASK) == BC_LOWER_PORT) #define MAX_NATIVE_DEVICES 64 @@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath); #define FLEX_MASK F_EXTEND(0xfffc0000) #define IO_IO_LOW offsetof(struct bc_module, io_io_low) #define IO_IO_HIGH offsetof(struct bc_module, io_io_high) -#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW) -#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH) +#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW) +#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH) static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, struct device *parent); @@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev) { unsigned long io_io_low, io_io_high; - if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) + if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) return; - if(dev->id.hw_type == HPHW_IOA) { + if (dev->id.hw_type == HPHW_IOA) { io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16); io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET; } else { @@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev) print_pa_hwpath(dev, hw_path); printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", - ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type, + ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); if (dev->num_addrs) { @@ -753,13 +847,20 @@ void init_parisc_bus(void) get_device(&root); } + +static int print_one_device(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) + print_parisc_device(pdev); + return 0; +} + /** * print_parisc_devices - Print out a list of devices found in this system */ void print_parisc_devices(void) { - struct parisc_device *dev; - for_each_padev(dev) { - print_parisc_device(dev); - } + for_each_padev(print_one_device, NULL); } diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index be0f07f2fa58..c7e66ee5b083 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -30,14 +30,14 @@ * - save registers to kernel stack and handle in assembly or C */ +#include <asm/psw.h> #include <asm/assembly.h> /* for LDREG/STREG defines */ #include <asm/pgtable.h> -#include <asm/psw.h> #include <asm/signal.h> #include <asm/unistd.h> #include <asm/thread_info.h> -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define CMPIB cmpib,* #define CMPB cmpb,* #define COND(x) *x @@ -67,19 +67,22 @@ /* Switch to virtual mapping, trashing only %r1 */ .macro virt_map - rsm PSW_SM_Q,%r0 - tovirt_r1 %r29 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 + mfsp %sr7, %r1 + or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ + mtsp %r1, %sr3 + tovirt_r1 %r29 + load32 KERNEL_PSW, %r1 + + rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ mtsp %r0, %sr6 mtsp %r0, %sr7 - load32 KERNEL_PSW, %r1 - mtctl %r1, %cr22 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ + mtctl %r1, %ipsw load32 4f, %r1 mtctl %r1, %cr18 /* Set IIAOQ tail */ ldo 4(%r1), %r1 @@ -214,7 +217,7 @@ va = r8 /* virtual address for which the trap occured */ spc = r24 /* space for which the trap occured */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * itlb miss interruption handler (parisc 1.1 - 32 bit) @@ -236,7 +239,7 @@ .macro itlb_20 code mfctl %pcsq, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -246,7 +249,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * naitlb miss interruption handler (parisc 1.1 - 32 bit) * @@ -283,7 +286,7 @@ .macro naitlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -296,7 +299,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dtlb miss interruption handler (parisc 1.1 - 32 bit) */ @@ -318,7 +321,7 @@ .macro dtlb_20 code mfctl %isr, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dtlb_miss_20w #else b dtlb_miss_20 @@ -328,7 +331,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */ .macro nadtlb_11 code @@ -346,7 +349,7 @@ .macro nadtlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b nadtlb_miss_20w #else b nadtlb_miss_20 @@ -356,7 +359,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dirty bit trap interruption handler (parisc 1.1 - 32 bit) */ @@ -378,7 +381,7 @@ .macro dbit_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dbit_trap_20w #else b dbit_trap_20 @@ -391,7 +394,7 @@ /* The following are simple 32 vs 64 bit instruction * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \reg1,32+\start,\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 @@ -399,7 +402,7 @@ .endm .macro DEP reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depd \reg1,32+\start,\length,\reg2 #else depw \reg1,\start,\length,\reg2 @@ -407,7 +410,7 @@ .endm .macro DEPI val,start,length,reg -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi \val,32+\start,\length,\reg #else depwi \val,\start,\length,\reg @@ -418,7 +421,7 @@ * fault. We have to extract this and place it in the va, * zeroing the corresponding bits in the space register */ .macro space_adjust spc,va,tmp -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \spc,63,SPACEID_SHIFT,\tmp depd %r0,63,SPACEID_SHIFT,\spc depd \tmp,31,SPACEID_SHIFT,\va @@ -476,7 +479,7 @@ bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ copy \pmd,%r9 -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r9,PxD_VALUE_SHIFT,\pmd #else shlw %r9,PxD_VALUE_SHIFT,\pmd @@ -607,7 +610,7 @@ .macro do_alias spc,tmp,tmp1,va,pte,prot,fault cmpib,COND(<>),n 0,\spc,\fault ldil L%(TMPALIAS_MAP_START),\tmp -#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000) +#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000) /* on LP64, ldi will sign extend into the upper 32 bits, * which is behaviour we don't want */ depdi 0,31,32,\tmp @@ -621,7 +624,7 @@ * OK, it is in the temp alias region, check whether "from" or "to". * Check "subtle" note in pacache.S re: r23/r26. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u,*= \va,41,1,%r0 #else extrw,u,= \va,9,1,%r0 @@ -688,7 +691,7 @@ fault_vector_20: def 30 def 31 -#ifndef __LP64__ +#ifndef CONFIG_64BIT .export fault_vector_11 @@ -761,7 +764,7 @@ __kernel_thread: copy %r30, %r1 ldo PT_SZ_ALGN(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Yo, function pointers in wide mode are little structs... -PB */ ldd 24(%r26), %r2 STREG %r2, PT_GR27(%r1) /* Store childs %dp */ @@ -777,7 +780,7 @@ __kernel_thread: or %r26, %r24, %r26 /* will have kernel mappings. */ ldi 1, %r25 /* stack_start, signals kernel thread */ stw %r0, -52(%r30) /* user_tid */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_fork, %r2 @@ -806,7 +809,7 @@ ret_from_kernel_thread: LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1 LDREG TASK_PT_GR25(%r1), %r26 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR27(%r1), %r27 LDREG TASK_PT_GR22(%r1), %r22 #endif @@ -814,11 +817,16 @@ ret_from_kernel_thread: ble 0(%sr7, %r1) copy %r31, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ loadgp /* Thread could have been in a module */ #endif +#ifndef CONFIG_64BIT b sys_exit +#else + load32 sys_exit, %r1 + bv %r0(%r1) +#endif ldi 0, %r26 .import sys_execve, code @@ -830,7 +838,7 @@ __execve: STREG %r26, PT_GR26(%r16) STREG %r25, PT_GR25(%r16) STREG %r24, PT_GR24(%r16) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL sys_execve, %r2 @@ -855,6 +863,7 @@ __execve: _switch_to: STREG %r2, -RP_OFFSET(%r30) + callee_save_float callee_save load32 _switch_to_ret, %r2 @@ -871,6 +880,7 @@ _switch_to: _switch_to_ret: mtctl %r0, %cr0 /* Needed for single stepping */ callee_rest + callee_rest_float LDREG -RP_OFFSET(%r30), %r2 bv %r0(%r2) @@ -888,9 +898,6 @@ _switch_to_ret: * this way, then we will need to copy %sr3 in to PT_SR[3..7], and * adjust IASQ[0..1]. * - * Note that the following code uses a "relied upon translation". - * See the parisc ACD for details. The ssm is necessary due to a - * PCXT bug. */ .align 4096 @@ -911,7 +918,7 @@ syscall_exit_rfi: STREG %r19,PT_IAOQ1(%r16) LDREG PT_PSW(%r16),%r19 load32 USER_PSW_MASK,%r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT load32 USER_PSW_HI_MASK,%r20 depd %r20,31,32,%r1 #endif @@ -955,7 +962,7 @@ intr_return: /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount ** irq_stat[] is defined using ____cacheline_aligned. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r1, 6, %r20 #else shlw %r1, 5, %r20 @@ -963,9 +970,6 @@ intr_return: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,intr_do_softirq /* forward */ - intr_check_resched: /* check for reschedule */ @@ -985,24 +989,19 @@ intr_restore: rest_fp %r1 rest_general %r29 - /* Create a "relied upon translation" PA 2.0 Arch. F-5 */ - ssm 0,%r0 - nop - nop - nop - nop - nop - nop - nop + /* inverse of virt_map */ + pcxt_ssm_bug + rsm PSW_SM_QUIET,%r0 /* prepare for rfi */ tophys_r1 %r29 - rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0 /* Restore space id's and special cr's from PT_REGS - * structure pointed to by r29 */ + * structure pointed to by r29 + */ rest_specials %r29 - /* Important: Note that rest_stack restores r29 - * last (we are using it)! It also restores r1 and r30. */ + /* IMPORTANT: rest_stack restores r29 last (we are using it)! + * It also restores r1 and r30. + */ rest_stack rfi @@ -1015,17 +1014,6 @@ intr_restore: nop nop - .import do_softirq,code -intr_do_softirq: - bl do_softirq,%r2 -#ifdef __LP64__ - ldo -16(%r30),%r29 /* Reference param save area */ -#else - nop -#endif - b intr_check_resched - nop - .import schedule,code intr_do_resched: /* Only do reschedule if we are returning to user space */ @@ -1036,12 +1024,17 @@ intr_do_resched: CMPIB= 0,%r20,intr_restore /* backward */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif ldil L%intr_check_sig, %r2 +#ifndef CONFIG_64BIT b schedule +#else + load32 schedule, %r20 + bv %r0(%r20) +#endif ldo R%intr_check_sig(%r2), %r2 @@ -1064,7 +1057,7 @@ intr_do_signal: copy %r0, %r24 /* unsigned long in_syscall */ copy %r16, %r25 /* struct pt_regs *regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1088,7 +1081,7 @@ intr_extint: mfctl %cr31,%r1 copy %r30,%r17 /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi 0,63,15,%r17 #else depi 0,31,15,%r17 @@ -1115,7 +1108,7 @@ intr_extint: ldil L%intr_return, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1153,15 +1146,17 @@ intr_save: CMPIB=,n 6,%r26,skip_save_ior - /* save_specials left ipsw value in r8 for us to test */ mfctl %cr20, %r16 /* isr */ + nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */ mfctl %cr21, %r17 /* ior */ -#ifdef __LP64__ + +#ifdef CONFIG_64BIT /* * If the interrupted code was running with W bit off (32 bit), * clear the b bits (bits 0 & 1) in the ior. + * save_specials left ipsw value in r8 for us to test. */ extrd,u,*<> %r8,PSW_W_BIT,1,%r0 depdi 0,1,2,%r17 @@ -1192,7 +1187,7 @@ skip_save_ior: loadgp copy %r29, %r25 /* arg1 is pt_regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1230,7 +1225,7 @@ skip_save_ior: spc = r24 /* space for which the trap occured */ ptp = r25 /* page directory/page table pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT dtlb_miss_20w: space_adjust spc,va,t0 @@ -1487,10 +1482,10 @@ nadtlb_emulate: add,l %r1,%r24,%r1 /* doesn't affect c/b bits */ nadtlb_nullify: - mfctl %cr22,%r8 /* Get ipsw */ + mfctl %ipsw,%r8 ldil L%PSW_N,%r9 or %r8,%r9,%r8 /* Set PSW_N */ - mtctl %r8,%cr22 + mtctl %r8,%ipsw rfir nop @@ -1521,7 +1516,7 @@ nadtlb_probe_check: nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT itlb_miss_20w: /* @@ -1588,7 +1583,7 @@ itlb_miss_20: #endif -#ifdef __LP64__ +#ifdef CONFIG_64BIT dbit_trap_20w: space_adjust spc,va,t0 @@ -1797,7 +1792,7 @@ sys_fork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1847,7 +1842,7 @@ sys_clone_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1869,7 +1864,7 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1897,10 +1892,10 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif - bl \execve,%r2 + BL \execve,%r2 copy %r1,%arg0 ldo -FRAME_SIZE(%r30),%r30 @@ -1923,7 +1918,7 @@ error_\execve: sys_execve_wrapper: execve_wrapper sys_execve -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_execve_wrapper .import sys32_execve @@ -1937,7 +1932,7 @@ sys_rt_sigreturn_wrapper: ldo TASK_REGS(%r26),%r26 /* get pt regs */ /* Don't save regs, we are going to restore them from sigcontext. */ STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 BL sys_rt_sigreturn,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1968,7 +1963,7 @@ sys_sigaltstack_wrapper: ldo TASK_REGS(%r1),%r24 /* get pt regs */ LDREG TASK_PT_GR30(%r24),%r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l do_sigaltstack,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1982,7 +1977,7 @@ sys_sigaltstack_wrapper: bv %r0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_sigaltstack_wrapper sys32_sigaltstack_wrapper: /* Get the user stack pointer */ @@ -2006,7 +2001,7 @@ sys_rt_sigsuspend_wrapper: reg_save %r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l sys_rt_sigsuspend,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -2079,7 +2074,7 @@ syscall_check_bh: ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */ /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r26, 6, %r20 #else shlw %r26, 5, %r20 @@ -2087,9 +2082,6 @@ syscall_check_bh: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */ - syscall_check_resched: /* check for reschedule */ @@ -2144,7 +2136,7 @@ syscall_restore: depi 3,31,2,%r31 /* ensure return to user mode. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -2227,20 +2219,10 @@ pt_regs_ok: b intr_restore nop - .import do_softirq,code -syscall_do_softirq: - bl do_softirq,%r2 - nop - /* NOTE: We enable I-bit incase we schedule later, - * and we might be going back to userspace if we were - * traced. */ - b syscall_check_resched - ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */ - .import schedule,code syscall_do_resched: BL schedule,%r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #else nop @@ -2260,7 +2242,7 @@ syscall_do_signal: ldi 1, %r24 /* unsigned long in_syscall */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_signal,%r2 diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index f244fb200db1..553f8fe03224 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8))); int parisc_narrow_firmware = 1; #endif -/* on all currently-supported platforms, IODC I/O calls are always - * 32-bit calls, and MEM_PDC calls are always the same width as the OS. - * This means Cxxx boxes can't run wide kernels right now. -PB +/* On most currently-supported platforms, IODC I/O calls are 32-bit calls + * and MEM_PDC calls are always the same width as the OS. + * Some PAT boxes may have 64-bit IODC I/O. * - * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on - * systems with 32-bit MEM_PDC calls. This will allow wide kernels to - * run on Cxxx boxes now. -RB - * - * Note that some PAT boxes may have 64-bit IODC I/O... + * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow + * 64-bit kernels to run on systems with 32-bit MEM_PDC calls. + * This allowed wide kernels to run on Cxxx boxes. + * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode + * when running a 64-bit kernel on such boxes (e.g. C200 or C360). */ #ifdef __LP64__ diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 28405edf8448..0b47afc20690 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -12,7 +12,7 @@ * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de> */ -#include <linux/autoconf.h> /* for CONFIG_SMP */ +#include <linux/config.h> /* for CONFIG_SMP */ #include <asm/asm-offsets.h> #include <asm/psw.h> @@ -36,10 +36,10 @@ boot_args: .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ .export stext .export _stext,data /* Kernel want it this way! */ _stext: @@ -76,7 +76,7 @@ $bss_loop: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 @@ -99,7 +99,7 @@ $bss_loop: stw %r3,0(%r4) ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 @@ -170,7 +170,7 @@ common_stext: stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ #endif /*CONFIG_SMP*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT tophys_r1 %sp /* Save the rfi target address */ @@ -224,8 +224,6 @@ stext_pdc_ret: mtctl %r0,%cr12 mtctl %r0,%cr13 - /* Prepare to RFI! Man all the cannons! */ - /* Initialize the global data pointer */ loadgp @@ -235,7 +233,7 @@ stext_pdc_ret: * following short sequence of instructions can determine this * (without being illegal on a PA1.1 machine). */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT ldi 32,%r10 mtctl %r10,%cr11 .level 2.0 @@ -248,52 +246,22 @@ stext_pdc_ret: $is_pa20: .level LEVEL /* restore 1.1 || 2.0w */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ load32 PA(fault_vector_20),%r10 $install_iva: mtctl %r10,%cr14 -#ifdef __LP64__ - b aligned_rfi + b aligned_rfi /* Prepare to RFI! Man all the cannons! */ nop - .align 256 + .align 128 aligned_rfi: - ssm 0,0 - nop /* 1 */ - nop /* 2 */ - nop /* 3 */ - nop /* 4 */ - nop /* 5 */ - nop /* 6 */ - nop /* 7 */ - nop /* 8 */ -#endif + pcxt_ssm_bug -#ifdef __LP64__ /* move to psw.h? */ -#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R -#else -#define PSW_BITS PSW_SM_Q -#endif + rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ + /* Don't need NOPs, have 8 compliant insn before rfi */ -$rfi: - /* turn off troublesome PSW bits */ - rsm PSW_BITS,%r0 - - /* kernel PSW: - * - no interruptions except HPMC and TOC (which are handled by PDC) - * - Q bit set (IODC / PDC interruptions) - * - big-endian - * - virtually mapped - */ - load32 KERNEL_PSW,%r10 - mtctl %r10,%ipsw - - /* Set the space pointers for the post-RFI world - ** Clear the two-level IIA Space Queue, effectively setting - ** Kernel space. - */ mtctl %r0,%cr17 /* Clear IIASQ tail */ mtctl %r0,%cr17 /* Clear IIASQ head */ @@ -301,8 +269,11 @@ $rfi: mtctl %r11,%cr18 /* IIAOQ head */ ldo 4(%r11),%r11 mtctl %r11,%cr18 /* IIAOQ tail */ + + load32 KERNEL_PSW,%r10 + mtctl %r10,%ipsw - /* Jump to hyperspace */ + /* Jump through hyperspace to Virt Mode */ rfi nop @@ -313,7 +284,7 @@ $rfi: .import smp_init_current_idle_task,data .import smp_callin,code -#ifndef __LP64__ +#ifndef CONFIG_64BIT smp_callin_rtn: .proc .callinfo @@ -321,7 +292,7 @@ smp_callin_rtn: nop nop .procend -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ /*************************************************************************** * smp_slave_stext is executed by all non-monarch Processors when the Monarch @@ -356,7 +327,7 @@ smp_slave_stext: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Setup PDCE_PROC entry */ copy %arg0,%r3 #else @@ -373,7 +344,7 @@ smp_slave_stext: .procend #endif /* CONFIG_SMP */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .data .align 4 @@ -383,4 +354,4 @@ smp_slave_stext: .size $global$,4 $global$: .word 0 -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c index 1d3824b670d1..8cad8f004f00 100644 --- a/arch/parisc/kernel/ioctl32.c +++ b/arch/parisc/kernel/ioctl32.c @@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (kversion.name) - kfree(kversion.name); - if (kversion.date) - kfree(kversion.date); - if (kversion.desc) - kfree(kversion.desc); + kfree(kversion.name); + kfree(kversion.date); + kfree(kversion.desc); return ret; } @@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a ret = -EFAULT; } - if (karg.unique != NULL) - kfree(karg.unique); - + kfree(karg.unique); return ret; } @@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) } kfree(karg.list); - return ret; } @@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) out: kfree(karg.list); - return ret; } @@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (karg.send_indices) - kfree(karg.send_indices); - if (karg.send_sizes) - kfree(karg.send_sizes); - if (karg.request_indices) - kfree(karg.request_indices); - if (karg.request_sizes) - kfree(karg.request_sizes); - + kfree(karg.send_indices); + kfree(karg.send_sizes); + kfree(karg.request_indices); + kfree(karg.request_sizes); return ret; } @@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) ret = -EFAULT; } - if (karg.contexts) - kfree(karg.contexts); - + kfree(karg.contexts); return ret; } diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 77e03bc0f935..9534ee17b9be 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -26,7 +26,7 @@ * can be used. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define ADDIB addib,* #define CMPB cmpb,* #define ANDCM andcm,* @@ -40,8 +40,10 @@ .level 2.0 #endif -#include <asm/assembly.h> +#include <linux/config.h> + #include <asm/psw.h> +#include <asm/assembly.h> #include <asm/pgtable.h> #include <asm/cache.h> @@ -62,32 +64,23 @@ flush_tlb_all_local: * to happen in real mode with all interruptions disabled. */ - /* - * Once again, we do the rfi dance ... some day we need examine - * all of our uses of this type of code and see what can be - * consolidated. - */ - - rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */ + /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */ + rsm PSW_SM_I, %r19 /* save I-bit state */ + load32 PA(1f), %r1 nop nop nop nop nop - nop - nop - - rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -178,29 +171,36 @@ fdtonemiddle: /* Loop if LOOP = 1 */ ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */ add %r21, %r20, %r20 /* increment space */ -fdtdone: - /* Switch back to virtual mode */ +fdtdone: + /* + * Switch back to virtual mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - or %r1, %r19, %r1 /* Set I bit if set on entry */ - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + or %r1, %r19, %r1 /* I-bit to state on entry */ + mtctl %r1, %ipsw /* restore I-bit (entire PSW) */ rfi nop 2: bv %r0(%r2) nop - .exit + .exit .procend .export flush_instruction_cache_local,code @@ -227,7 +227,7 @@ flush_instruction_cache_local: fimanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */ - fice 0(%sr1, %arg0) + fice %r0(%sr1, %arg0) fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */ movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */ @@ -238,7 +238,7 @@ fioneloop: /* Loop if LOOP = 1 */ fisync: sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -269,7 +269,7 @@ flush_data_cache_local: fdmanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */ - fdce 0(%sr1, %arg0) + fdce %r0(%sr1, %arg0) fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */ movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */ @@ -281,7 +281,7 @@ fdoneloop: /* Loop if LOOP = 1 */ fdsync: syncdma sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -296,7 +296,7 @@ copy_user_page_asm: .callinfo NO_CALLS .entry -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* PA8x00 CPUs can consume 2 loads or 1 store per cycle. * Unroll the loop by hand and arrange insn appropriately. * GCC probably can do this just as well. @@ -351,7 +351,11 @@ copy_user_page_asm: std %r22, 120(%r26) ldo 128(%r26), %r26 - ADDIB> -1, %r1, 1b /* bundle 10 */ + /* conditional branches nullify on forward taken branch, and on + * non-taken backward branch. Note that .+4 is a backwards branch. + * The ldd should only get executed if the branch is taken. + */ + ADDIB>,n -1, %r1, 1b /* bundle 10 */ ldd 0(%r25), %r19 /* start next loads */ #else @@ -363,10 +367,10 @@ copy_user_page_asm: * the full 64 bit register values on interrupt, we can't * use ldd/std on a 32 bit kernel. */ + ldw 0(%r25), %r19 ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ 1: - ldw 0(%r25), %r19 ldw 4(%r25), %r20 ldw 8(%r25), %r21 ldw 12(%r25), %r22 @@ -396,11 +400,12 @@ copy_user_page_asm: ldw 60(%r25), %r22 stw %r19, 48(%r26) stw %r20, 52(%r26) + ldo 64(%r25), %r25 stw %r21, 56(%r26) stw %r22, 60(%r26) ldo 64(%r26), %r26 - ADDIB> -1, %r1, 1b - ldo 64(%r25), %r25 + ADDIB>,n -1, %r1, 1b + ldw 0(%r25), %r19 #endif bv %r0(%r2) nop @@ -456,7 +461,7 @@ copy_user_page_asm: sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ @@ -543,7 +548,7 @@ __clear_user_page_asm: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ #endif @@ -560,7 +565,7 @@ __clear_user_page_asm: pdtlb 0(%r28) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ /* PREFETCH (Write) has not (yet) been proven to help here */ @@ -585,7 +590,7 @@ __clear_user_page_asm: ADDIB> -1, %r1, 1b ldo 128(%r28), %r28 -#else /* ! __LP64 */ +#else /* ! CONFIG_64BIT */ ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ @@ -608,7 +613,7 @@ __clear_user_page_asm: stw %r0, 60(%r28) ADDIB> -1, %r1, 1b ldo 64(%r28), %r28 -#endif /* __LP64 */ +#endif /* CONFIG_64BIT */ bv %r0(%r2) nop @@ -626,7 +631,7 @@ flush_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -670,7 +675,7 @@ flush_user_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1,63-PAGE_SHIFT,1, %r25 #else depwi,z 1,31-PAGE_SHIFT,1, %r25 @@ -714,7 +719,7 @@ flush_user_icache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -759,7 +764,7 @@ purge_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -807,7 +812,7 @@ flush_alias_page: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ depdi 0, 63,12, %r28 /* Clear any offset bits */ @@ -824,7 +829,7 @@ flush_alias_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r29 #else depwi,z 1, 31-PAGE_SHIFT,1, %r29 @@ -935,7 +940,7 @@ flush_kernel_icache_page: ldil L%icache_stride, %r1 ldw R%icache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -944,23 +949,23 @@ flush_kernel_icache_page: sub %r25, %r23, %r25 -1: fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) +1: fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) CMPB<< %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) @@ -982,17 +987,18 @@ flush_kernel_icache_range_asm: ANDCM %r26, %r21, %r26 1: CMPB<<,n %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) nop .exit - .procend - .align 128 - + /* align should cover use of rfi in disable_sr_hashing_asm and + * srdis_done. + */ + .align 256 .export disable_sr_hashing_asm,code disable_sr_hashing_asm: @@ -1000,28 +1006,26 @@ disable_sr_hashing_asm: .callinfo NO_CALLS .entry - /* Switch to real mode */ - - ssm 0, %r0 /* relied upon translation! */ - nop - nop + /* + * Switch to real mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 PA(1f), %r1 nop nop nop nop nop - - rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -1053,27 +1057,31 @@ srdis_pcxl: srdis_pa20: - /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */ + /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */ .word 0x144008bc /* mfdiag %dr2, %r28 */ depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */ .word 0x145c1840 /* mtdiag %r28, %dr2 */ -srdis_done: +srdis_done: /* Switch back to virtual mode */ + rsm PSW_SM_I, %r0 /* prep to load iia queue */ + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + mtctl %r1, %ipsw rfi nop diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 368cc095c99f..ae6213d71670 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -31,7 +31,7 @@ #include <asm/page.h> /* get_order */ #include <asm/pgalloc.h> #include <asm/uaccess.h> - +#include <asm/tlbflush.h> /* for purge_tlb_*() macros */ static struct proc_dir_entry * proc_gsc_root = NULL; static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length); @@ -333,23 +333,33 @@ pcxl_free_range(unsigned long vaddr, size_t size) static int __init pcxl_dma_init(void) { - if (pcxl_dma_start == 0) - return 0; + if (pcxl_dma_start == 0) + return 0; - spin_lock_init(&pcxl_res_lock); - pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); - pcxl_res_hint = 0; - pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, + spin_lock_init(&pcxl_res_lock); + pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); + pcxl_res_hint = 0; + pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, get_order(pcxl_res_size)); - memset(pcxl_res_map, 0, pcxl_res_size); - proc_gsc_root = proc_mkdir("gsc", 0); - create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info); - return 0; + memset(pcxl_res_map, 0, pcxl_res_size); + proc_gsc_root = proc_mkdir("gsc", 0); + if (!proc_gsc_root) + printk(KERN_WARNING + "pcxl_dma_init: Unable to create gsc /proc dir entry\n"); + else { + struct proc_dir_entry* ent; + ent = create_proc_info_entry("pcxl_dma", 0, + proc_gsc_root, pcxl_proc_info); + if (!ent) + printk(KERN_WARNING + "pci-dma.c: Unable to create pcxl_dma /proc entry.\n"); + } + return 0; } __initcall(pcxl_dma_init); -static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { unsigned long vaddr; unsigned long paddr; @@ -502,13 +512,13 @@ struct hppa_dma_ops pcxl_dma_ops = { }; static void *fail_alloc_consistent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { return NULL; } static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { void *addr = NULL; @@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = { static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) { +#if 0 u_long i = 0; unsigned long *res_ptr = (u_long *)pcxl_res_map; - unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ +#endif + unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ - sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n", - PCXL_DMA_MAP_SIZE, - (pcxl_res_size << 3) ); /* 1 bit per page */ + sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n", + PCXL_DMA_MAP_SIZE, total_pages); - sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", - buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */ + sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size); strcat(buf, " total: free: used: % used:\n"); sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size, @@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages, total_pages - pcxl_used_pages, pcxl_used_pages, (pcxl_used_pages * 100 / total_pages)); - + +#if 0 strcat(buf, "\nResource bitmap:"); for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) { @@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) strcat(buf,"\n "); sprintf(buf, "%s %08lx", buf, *res_ptr); } +#endif strcat(buf, "\n"); return strlen(buf); } diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index e6a891a0cad0..88cba49c5301 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -202,7 +202,8 @@ static void pcibios_link_hba_resources( struct resource *hba_res, struct resource *r) { if (!r->parent) { - printk(KERN_EMERG "PCI: Tell willy he's wrong\n"); + printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n", + r->start, r->end); r->parent = hba_res; /* reverse link is harder *sigh* */ diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 01f676d1673b..215d78c87bc5 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -41,7 +41,7 @@ /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */ -#undef EARLY_BOOTUP_DEBUG +#define EARLY_BOOTUP_DEBUG #include <linux/config.h> @@ -49,14 +49,8 @@ #include <linux/console.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/interrupt.h> #include <linux/major.h> #include <linux/tty.h> -#include <asm/page.h> -#include <asm/types.h> -#include <asm/system.h> #include <asm/pdc.h> /* for iodc_call() proto and friends */ @@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options) } #if defined(CONFIG_PDC_CONSOLE) -#define PDC_CONSOLE_DEVICE pdc_console_device static struct tty_driver * pdc_console_device (struct console *c, int *index) { extern struct tty_driver console_driver; @@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index) return &console_driver; } #else -#define PDC_CONSOLE_DEVICE NULL +#define pdc_console_device NULL #endif static struct console pdc_cons = { .name = "ttyB", .write = pdc_console_write, - .device = PDC_CONSOLE_DEVICE, + .device = pdc_console_device, .setup = pdc_console_setup, - .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED, + .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED, .index = -1, }; static int pdc_console_initialized; -extern unsigned long con_start; /* kernel/printk.c */ -extern unsigned long log_end; /* kernel/printk.c */ - static void pdc_console_init_force(void) { @@ -146,27 +136,11 @@ void __init pdc_console_init(void) } -/* Unregister the pdc console with the printk console layer */ -void pdc_console_die(void) -{ - if (!pdc_console_initialized) - return; - --pdc_console_initialized; - - printk(KERN_INFO "Switching from PDC console\n"); - - /* Don't repeat what we've already printed */ - con_start = log_end; - - unregister_console(&pdc_cons); -} - - /* * Used for emergencies. Currently only used if an HPMC occurs. If an * HPMC occurs, it is possible that the current console may not be - * properly initialed after the PDC IO reset. This routine unregisters all - * of the current consoles, reinitializes the pdc console and + * properly initialised after the PDC IO reset. This routine unregisters + * all of the current consoles, reinitializes the pdc console and * registers it. */ @@ -177,13 +151,13 @@ void pdc_console_restart(void) if (pdc_console_initialized) return; + /* If we've already seen the output, don't bother to print it again */ + if (console_drivers != NULL) + pdc_cons.flags &= ~CON_PRINTBUFFER; + while ((console = console_drivers) != NULL) unregister_console(console_drivers); - /* Don't repeat what we've already printed */ - con_start = log_end; - /* force registering the pdc console */ pdc_console_init_force(); } - diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index b3ad0a505b87..44670d6e06f4 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr) uint64_t *bptr; uint32_t dwords; uint32_t *intrigue_rdr; - uint64_t *intrigue_bitmask, tmp64, proc_hpa; + uint64_t *intrigue_bitmask, tmp64; + void __iomem *runway; struct rdr_tbl_ent *tentry; int i; @@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr) return -1; } - proc_hpa = cpu_device->hpa; + runway = ioremap(cpu_device->hpa.start, 4096); /* Merge intrigue bits into Runway STATUS 0 */ - tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; - __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), + runway + RUNWAY_STATUS); /* Write RUNWAY DEBUG registers */ for (i = 0; i < 8; i++) { - __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG); } return 0; diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 46b759385115..7fdca87ef647 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -9,7 +9,7 @@ * Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org> * Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org> * Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com> - * Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org> + * Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org> * Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org> * Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org> * Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org> @@ -245,7 +245,17 @@ int sys_clone(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs) { - int __user *user_tid = (int __user *)regs->gr[26]; + /* Arugments from userspace are: + r26 = Clone flags. + r25 = Child stack. + r24 = parent_tidptr. + r23 = Is the TLS storage descriptor + r22 = child_tidptr + + However, these last 3 args are only examined + if the proper flags are set. */ + int __user *child_tidptr; + int __user *parent_tidptr; /* usp must be word aligned. This also prevents users from * passing in the value 1 (which is the signal for a special @@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp, usp = ALIGN(usp, 4); /* A zero value for usp means use the current stack */ - if(usp == 0) - usp = regs->gr[30]; + if (usp == 0) + usp = regs->gr[30]; - return do_fork(clone_flags, usp, regs, 0, user_tid, NULL); + if (clone_flags & CLONE_PARENT_SETTID) + parent_tidptr = (int __user *)regs->gr[24]; + else + parent_tidptr = NULL; + + if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) + child_tidptr = (int __user *)regs->gr[22]; + else + child_tidptr = NULL; + + return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr); } int @@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } else { cregs->kpc = (unsigned long) &child_return; } + /* Setup thread TLS area from the 4th parameter in clone */ + if (clone_flags & CLONE_SETTLS) + cregs->cr27 = pregs->gr[23]; + } return 0; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 13b721cb9f55..4f5bbcf1f5a4 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev) * May get overwritten by PAT code. */ cpuid = boot_cpu_data.cpu_count; - txn_addr = dev->hpa; /* for legacy PDC */ + txn_addr = dev->hpa.start; /* for legacy PDC */ #ifdef __LP64__ if (is_pdc_pat()) { @@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev) * boot time (ie shutdown a CPU from an OS perspective). */ /* get the cpu number */ - status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start); BUG_ON(PDC_OK != status); @@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev) printk(KERN_WARNING "IGNORING CPU at 0x%x," " cpu_slot_id > NR_CPUS" " (%ld > %d)\n", - dev->hpa, cpu_info.cpu_num, NR_CPUS); + dev->hpa.start, cpu_info.cpu_num, NR_CPUS); /* Ignore CPU since it will only crash */ boot_cpu_data.cpu_count--; return 1; @@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev) p->loops_per_jiffy = loops_per_jiffy; p->dev = dev; /* Save IODC data in case we need it */ - p->hpa = dev->hpa; /* save CPU hpa */ + p->hpa = dev->hpa.start; /* save CPU hpa */ p->cpuid = cpuid; /* save CPU id */ p->txn_addr = txn_addr; /* save CPU IRQ address */ #ifdef CONFIG_SMP diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 8dd5defb7316..8c2859cca77e 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -7,8 +7,10 @@ * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com) * */ -#include <asm/assembly.h> +#include <linux/config.h> + #include <asm/psw.h> +#include <asm/assembly.h> .section .bss .export real_stack @@ -20,7 +22,7 @@ real32_stack: real64_stack: .block 8192 -#ifdef __LP64__ +#ifdef CONFIG_64BIT # define REG_SZ 8 #else # define REG_SZ 4 @@ -50,7 +52,7 @@ save_cr_end: real32_call_asm: STREG %rp, -RP_OFFSET(%sp) /* save RP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT callee_save ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */ STREG %r27, -1*REG_SZ(%sp) @@ -77,7 +79,7 @@ real32_call_asm: b,l save_control_regs,%r2 /* modifies r1, r2, r28 */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT rsm PSW_SM_W, %r0 /* go narrow */ #endif @@ -85,7 +87,7 @@ real32_call_asm: bv 0(%r31) nop ric_ret: -#ifdef __LP64__ +#ifdef CONFIG_64BIT ssm PSW_SM_W, %r0 /* go wide */ #endif /* restore CRs before going virtual in case we page fault */ @@ -97,7 +99,7 @@ ric_ret: tovirt_r1 %sp LDREG -REG_SZ(%sp), %sp /* restore SP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG -1*REG_SZ(%sp), %r27 LDREG -2*REG_SZ(%sp), %r29 ldo -2*REG_SZ(%sp), %sp @@ -143,24 +145,21 @@ restore_control_regs: /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ - .align 128 .text + .align 128 rfi_virt2real: /* switch to real mode... */ - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 PA(rfi_v2r_1), %r1 nop nop nop nop nop - rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */ + rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 PA(rfi_v2r_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -184,10 +183,8 @@ rfi_v2r_1: .text .align 128 rfi_real2virt: - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 (rfi_r2v_1), %r1 nop nop nop @@ -197,7 +194,6 @@ rfi_real2virt: rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 (rfi_r2v_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -218,7 +214,7 @@ rfi_r2v_1: bv 0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT /************************ 64-bit real-mode calls ***********************/ /* This is only usable in wide kernels right now and will probably stay so */ @@ -296,7 +292,7 @@ pc_in_user_space: ** comparing function pointers. */ __canonicalize_funcptr_for_compare: -#ifdef __LP64__ +#ifdef CONFIG_64BIT bve (%r2) #else bv %r0(%r2) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 0224651fd8f1..82c24e62ab63 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, give_sigsegv: DBG(1,"setup_rt_frame: sending SIGSEGV\n"); - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = current->pid; - si.si_uid = current->uid; - si.si_addr = frame; - force_sig_info(SIGSEGV, &si, current); + force_sigsegv(sig, current); return 0; } @@ -633,10 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) put_user(0xe0008200, &usp[3]); put_user(0x34140000, &usp[4]); - /* Stack is 64-byte aligned, and we only - * need to flush 1 cache line */ - asm("fdc 0(%%sr3, %0)\n" - "fic 0(%%sr3, %0)\n" + /* Stack is 64-byte aligned, and we only need + * to flush 1 cache line. + * Flushing one cacheline is cheap. + * "sync" on bigger (> 4 way) boxes is not. + */ + asm("fdc %%r0(%%sr3, %0)\n" + "sync\n" + "fic %%r0(%%sr3, %0)\n" "sync\n" : : "r"(regs->gr[30])); diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index bcc7e83f5142..5db3be4e2704 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -18,7 +18,7 @@ */ #undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */ -#include <linux/autoconf.h> +#include <linux/config.h> #include <linux/types.h> #include <linux/spinlock.h> diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 8c7a7185cd3b..b29b76b42bb7 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -6,6 +6,7 @@ * thanks to Philipp Rumpf, Mike Shaver and various others * sorry about the wall, puffin.. */ +#include <linux/config.h> /* for CONFIG_SMP */ #include <asm/asm-offsets.h> #include <asm/unistd.h> @@ -22,15 +23,13 @@ */ #define KILL_INSN break 0,0 -#include <linux/config.h> /* for CONFIG_SMP */ - -#ifdef __LP64__ +#ifdef CONFIG_64BIT .level 2.0w #else .level 1.1 #endif -#ifndef __LP64__ +#ifndef CONFIG_64BIT .macro fixup_branch,lbl b \lbl .endm @@ -103,7 +102,7 @@ linux_gateway_entry: mfsp %sr7,%r1 /* save user sr7 */ mtsp %r1,%sr3 /* and store it in sr3 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* for now we can *always* set the W bit on entry to the syscall * since we don't support wide userland processes. We could * also save the current SM other than in r0 and restore it on @@ -155,7 +154,7 @@ linux_gateway_entry: STREG %r19, TASK_PT_GR19(%r1) LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */ #if 0 xor %r19,%r2,%r2 /* clear bottom bit */ @@ -186,7 +185,7 @@ linux_gateway_entry: loadgp -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ copy %r19,%r2 /* W bit back to r2 */ #else @@ -205,7 +204,7 @@ linux_gateway_entry: /* Note! We cannot use the syscall table that is mapped nearby since the gateway page is mapped execute-only. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldil L%sys_call_table, %r1 or,= %r2,%r2,%r2 addil L%(sys_call_table64-sys_call_table), %r1 @@ -321,7 +320,7 @@ tracesys_next: LDREG TASK_PT_GR25(%r1), %r25 LDREG TASK_PT_GR24(%r1), %r24 LDREG TASK_PT_GR23(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR22(%r1), %r22 LDREG TASK_PT_GR21(%r1), %r21 ldo -16(%r30),%r29 /* Reference param save area */ @@ -350,7 +349,7 @@ tracesys_next: tracesys_exit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG TI_TASK(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -371,7 +370,7 @@ tracesys_exit: tracesys_sigexit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG 0(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -404,7 +403,7 @@ lws_start: gate .+8, %r0 depi 3, 31, 2, %r31 /* Ensure we return to userspace */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: If we are a 64-bit kernel just * turn this on unconditionally. */ @@ -440,7 +439,7 @@ lws_exit_nosys: /* Fall through: Return to userspace */ lws_exit: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -486,7 +485,7 @@ lws_exit: /* ELF64 Process entry path */ lws_compare_and_swap64: -#ifdef __LP64__ +#ifdef CONFIG_64BIT b,n lws_compare_and_swap #else /* If we are not a 64-bit kernel, then we don't @@ -497,7 +496,7 @@ lws_compare_and_swap64: /* ELF32 Process entry path */ lws_compare_and_swap32: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Clip all the input registers */ depdi 0, 31, 32, %r26 depdi 0, 31, 32, %r25 @@ -608,7 +607,7 @@ cas_action: the other for the store. Either return -EFAULT. Each of the entries must be relocated. */ .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(2b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -619,7 +618,7 @@ cas_action: .previous .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(1b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -638,7 +637,7 @@ end_linux_gateway_page: /* Relocate symbols assuming linux_gateway_page is mapped to virtual address 0x0 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: The code will always be on the gateay page and thus it will be on the first 4k, the assembler seems to think that the final @@ -666,7 +665,7 @@ lws_table: sys_call_table: #include "syscall_table.S" -#ifdef __LP64__ +#ifdef CONFIG_64BIT .align 4096 .export sys_call_table64 .Lsys_call_table64: diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index dcfa4d3d0e7d..32cbc0489324 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -35,7 +35,7 @@ #undef ENTRY_UHOH #undef ENTRY_COMP #undef ENTRY_OURS -#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT) +#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT) /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific * implementation is required on wide palinux. Use ENTRY_COMP where @@ -46,7 +46,7 @@ #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented #define ENTRY_OURS(_name_) .dword parisc_##_name_ #define ENTRY_COMP(_name_) .dword compat_sys_##_name_ -#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT) +#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT) #define ENTRY_SAME(_name_) .dword sys_##_name_ #define ENTRY_DIFF(_name_) .dword sys_##_name_ #define ENTRY_UHOH(_name_) .dword sys_##_name_ @@ -368,5 +368,11 @@ ENTRY_COMP(mbind) /* 260 */ ENTRY_COMP(get_mempolicy) ENTRY_COMP(set_mempolicy) + ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */ + ENTRY_SAME(add_key) + ENTRY_SAME(request_key) /* 265 */ + ENTRY_SAME(keyctl) + ENTRY_SAME(ioprio_set) + ENTRY_SAME(ioprio_get) /* Nothing yet */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 7ff67f8e9f8c..bc979e1abdec 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -89,14 +89,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } -#ifdef CONFIG_CHASSIS_LCD_LED - /* Only schedule the led tasklet on cpu 0, and only if it - * is enabled. - */ - if (cpu == 0 && !atomic_read(&led_tasklet.count)) - tasklet_schedule(&led_tasklet); -#endif - /* check soft power switch status */ if (cpu == 0 && !atomic_read(&power_tasklet.count)) tasklet_schedule(&power_tasklet); @@ -104,6 +96,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (regs->gr[0] & PSW_N) + pc -= 4; + +#ifdef CONFIG_SMP + if (in_lock_functions(pc)) + pc = regs->gr[2]; +#endif + + return pc; +} +EXPORT_SYMBOL(profile_pc); + + /*** converted from ia64 ***/ /* * Return the number of micro-seconds that elapsed since the last diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index d2e5b229a2f4..15914f0235a0 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs) char *level; unsigned long cr30; unsigned long cr31; - + /* carlos says that gcc understands better memory in a struct, + * and it makes our life easier with fpregs -- T-Bone */ + struct { u32 sw[2]; } s; + level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; printk("%s\n", level); /* don't want to have that pretty register dump messed up */ @@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs) printk("%s\n", buf); } -#if RIDICULOUSLY_VERBOSE - for (i = 0; i < 32; i += 2) - printk("%sFR%02d : %016lx FR%2d : %016lx", level, i, - regs->fr[i], i+1, regs->fr[i+1]); -#endif + /* FR are 64bit everywhere. Need to use asm to get the content + * of fpsr/fper1, and we assume that we won't have a FP Identify + * in our way, otherwise we're screwed. + * The fldd is used to restore the T-bit if there was one, as the + * store clears it anyway. + * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ + __asm__ ( + "fstd %%fr0,0(%1) \n\t" + "fldd 0(%1),%%fr0 \n\t" + : "=m" (s) : "r" (&s) : "%r0" + ); + + printk("%s\n", level); + printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level); + printbinary(buf, s.sw[0], 32); + printk("%sFPSR: %s\n", level, buf); + printk("%sFPER1: %08x\n", level, s.sw[1]); + + /* here we'll print fr0 again, tho it'll be meaningless */ + for (i = 0; i < 32; i += 4) { + int j; + p = buf; + p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3); + for (j = 0; j < 4; j++) + p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]); + printk("%s\n", buf); + } cr30 = mfctl(30); cr31 = mfctl(31); diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 62eea35bcd69..eaae8a021f9f 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs) register int flop=0; /* true if this is a flop */ /* log a message with pacing */ - if (user_mode(regs)) - { - if (unaligned_count > 5 && jiffies - last_time > 5*HZ) - { + if (user_mode(regs)) { + if (current->thread.flags & PARISC_UAC_SIGBUS) { + goto force_sigbus; + } + + if (unaligned_count > 5 && jiffies - last_time > 5*HZ) { unaligned_count = 0; last_time = jiffies; } - if (++unaligned_count < 5) - { + + if (!(current->thread.flags & PARISC_UAC_NOPRINT) + && ++unaligned_count < 5) { char buf[256]; sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n", current->comm, current->pid, regs->ior, regs->iaoq[0]); @@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs) show_regs(regs); #endif } + if (!unaligned_enabled) goto force_sigbus; } diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 1b91612ed964..e0661c2978ed 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -35,7 +35,7 @@ extrd,u \t2,63,32,\t2 #endif /* t2 = &__per_cpu_offset[smp_processor_id()]; */ - LDREG,s \t2(\t1),\t2 + LDREGX \t2(\t1),\t2 addil LT%per_cpu__exception_data,%r27 LDREG RT%per_cpu__exception_data(%r1),\t1 /* t1 = &__get_cpu_var(exception_data) */ @@ -53,6 +53,8 @@ .endm #endif + .level LEVEL + .text .section .fixup, "ax" diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index feb1b9f42c2b..b7098035321f 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) pds = (double *)pcs; pdd = (double *)pcd; +#if 0 /* Copy 8 doubles at a time */ while (len >= 8*sizeof(double)) { register double r1, r2, r3, r4, r5, r6, r7, r8; @@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) fstdma(d_space, r8, pdd, pmc_store_exc); len -= 8*sizeof(double); } +#endif pws = (unsigned int *)pds; pwd = (unsigned int *)pdd; diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h index a3c38c5a5db2..f1c7392255f8 100644 --- a/arch/ppc/8xx_io/cs4218.h +++ b/arch/ppc/8xx_io/cs4218.h @@ -78,7 +78,7 @@ typedef struct { const char *name2; void (*open)(void); void (*release)(void); - void *(*dma_alloc)(unsigned int, int); + void *(*dma_alloc)(unsigned int, gfp_t); void (*dma_free)(void *, unsigned int); int (*irqinit)(void); #ifdef MODULE diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 2ca9ec7ec3a7..532caa388dc2 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -318,7 +318,7 @@ struct cs_sound_settings { static struct cs_sound_settings sound; -static void *CS_Alloc(unsigned int size, int flags); +static void *CS_Alloc(unsigned int size, gfp_t flags); static void CS_Free(void *ptr, unsigned int size); static int CS_IrqInit(void); #ifdef MODULE @@ -959,7 +959,7 @@ static TRANS transCSNormalRead = { /*** Low level stuff *********************************************************/ -static void *CS_Alloc(unsigned int size, int flags) +static void *CS_Alloc(unsigned int size, gfp_t flags) { int order; diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index 8edee806dae7..0f710d2baec6 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -115,7 +115,7 @@ static struct vm_region consistent_head = { }; static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, int gfp) +vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -173,7 +173,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad * virtual and bus address for that space. */ void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp) +__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; struct vm_region *c; diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 81a3d7446d37..43505b1fc5d8 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -114,9 +114,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) struct page *ptepage; #ifdef CONFIG_HIGHPTE - int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT; + gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT; #else - int flags = GFP_KERNEL | __GFP_REPEAT; + gfp_t flags = GFP_KERNEL | __GFP_REPEAT; #endif ptepage = alloc_pages(flags, 0); diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c index 1efc18e786d5..610740512d56 100644 --- a/arch/sh/boards/renesas/rts7751r2d/mach.c +++ b/arch/sh/boards/renesas/rts7751r2d/mach.c @@ -23,7 +23,7 @@ extern void init_rts7751r2d_IRQ(void); extern void *rts7751r2d_ioremap(unsigned long, unsigned long); extern int rts7751r2d_irq_demux(int irq); -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int); +extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); /* diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c index 5b92585a38d2..3d9a02c093a3 100644 --- a/arch/sh/cchips/voyagergx/consistent.c +++ b/arch/sh/cchips/voyagergx/consistent.c @@ -31,7 +31,7 @@ static LIST_HEAD(voya_alloc_list); #define OHCI_SRAM_SIZE 0x10000 void *voyagergx_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *handle, int flag) + dma_addr_t *handle, gfp_t flag) { struct list_head *list = &voya_alloc_list; struct voya_alloc_entry *entry; diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c index 83de7ef4e7df..e12418bb1fa5 100644 --- a/arch/sh/drivers/pci/dma-dreamcast.c +++ b/arch/sh/drivers/pci/dma-dreamcast.c @@ -33,7 +33,7 @@ static int gapspci_dma_used = 0; void *dreamcast_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { unsigned long buf; diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 1f7af0c73cf4..df3a9e452cc5 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -11,7 +11,7 @@ #include <linux/dma-mapping.h> #include <asm/io.h> -void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle) +void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) { struct page *page, *end, *free; void *ret; diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c index d7c1c76582cc..fc6669e8dde1 100644 --- a/arch/sparc64/solaris/socksys.c +++ b/arch/sparc64/solaris/socksys.c @@ -49,7 +49,7 @@ IPPROTO_EGP, IPPROTO_PUP, IPPROTO_UDP, IPPROTO_IDP, IPPROTO_RAW, #else -extern void * mykmalloc(size_t s, int gfp); +extern void * mykmalloc(size_t s, gfp_t gfp); extern void mykfree(void *); #endif diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c index aaad29c35c83..b84e5456b025 100644 --- a/arch/sparc64/solaris/timod.c +++ b/arch/sparc64/solaris/timod.c @@ -39,7 +39,7 @@ static char * page = NULL ; #else -void * mykmalloc(size_t s, int gfp) +void * mykmalloc(size_t s, gfp_t gfp) { static char * page; static size_t free; diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index ea008b031a8f..462cc9d65386 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -252,7 +252,7 @@ void paging_init(void) #endif } -struct page *arch_validate(struct page *page, int mask, int order) +struct page *arch_validate(struct page *page, gfp_t mask, int order) { unsigned long addr, zero = 0; int i; diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index ea65db679e9c..0d73ceeece72 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -80,7 +80,7 @@ void free_stack(unsigned long stack, int order) unsigned long alloc_stack(int order, int atomic) { unsigned long page; - int flags = GFP_KERNEL; + gfp_t flags = GFP_KERNEL; if (atomic) flags = GFP_ATOMIC; diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index cf0a0315d586..88be97c96987 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -187,7 +187,7 @@ static void flush_gart(struct device *dev) /* Allocate DMA memory on node near device */ noinline -static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order) +static void *dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { struct page *page; int node; @@ -204,7 +204,7 @@ static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order) */ void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - unsigned gfp) + gfp_t gfp) { void *memory; unsigned long dma_mask = 0; diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c index 67d90b89af0b..5a981dca87ff 100644 --- a/arch/x86_64/kernel/pci-nommu.c +++ b/arch/x86_64/kernel/pci-nommu.c @@ -24,7 +24,7 @@ EXPORT_SYMBOL(iommu_sac_force); */ void *dma_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; u64 mask; diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c index 84fde258cf85..1ff82268e8ea 100644 --- a/arch/xtensa/kernel/pci-dma.c +++ b/arch/xtensa/kernel/pci-dma.c @@ -29,7 +29,7 @@ */ void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { void *ret; |