diff options
Diffstat (limited to 'arch')
88 files changed, 526 insertions, 335 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 76dde9db7934..0655495470ad 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -338,6 +338,19 @@ config ARC_PAGE_SIZE_4K endchoice +choice + prompt "MMU Super Page Size" + depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE + default ARC_HUGEPAGE_2M + +config ARC_HUGEPAGE_2M + bool "2MB" + +config ARC_HUGEPAGE_16M + bool "16MB" + +endchoice + if ISA_ARCOMPACT config ARC_COMPACT_IRQ_LEVELS @@ -410,7 +423,7 @@ config ARC_HAS_RTC default n depends on !SMP -config ARC_HAS_GRTC +config ARC_HAS_GFRC bool "SMP synchronized 64-bit cycle counter" default y depends on SMP @@ -566,6 +579,12 @@ endmenu endmenu # "ARC Architecture Configuration" source "mm/Kconfig" + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "12" if ARC_HUGEPAGE_16M + default "11" + source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig index f36c047b33ca..735985974a31 100644 --- a/arch/arc/configs/vdk_hs38_smp_defconfig +++ b/arch/arc/configs/vdk_hs38_smp_defconfig @@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y CONFIG_AXS103=y CONFIG_ISA_ARCV2=y CONFIG_SMP=y -# CONFIG_ARC_HAS_GRTC is not set +# CONFIG_ARC_HAS_GFRC is not set CONFIG_ARC_UBOOT_SUPPORT=y CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp" CONFIG_PREEMPT=y diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 7fac7d85ed6a..fdc5be5b1029 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -349,14 +349,13 @@ struct cpuinfo_arc { struct cpuinfo_arc_bpu bpu; struct bcr_identity core; struct bcr_isa isa; - struct bcr_timer timers; unsigned int vec_base; struct cpuinfo_arc_ccm iccm, dccm; struct { unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3, fpu_sp:1, fpu_dp:1, pad2:6, debug:1, ap:1, smart:1, rtt:1, pad3:4, - pad4:8; + timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4; } extn; struct bcr_mpy extn_mpy; struct bcr_extn_xymem extn_xymem; diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h index 258b0e5ad332..1fc18ee06cf2 100644 --- a/arch/arc/include/asm/irqflags-arcv2.h +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -30,8 +30,11 @@ /* Was Intr taken in User Mode */ #define AUX_IRQ_ACT_BIT_U 31 -/* 0 is highest level, but taken by FIRQs, if present in design */ -#define ARCV2_IRQ_DEF_PRIO 0 +/* + * User space should be interruptable even by lowest prio interrupt + * Safe even if actual interrupt priorities is fewer or even one + */ +#define ARCV2_IRQ_DEF_PRIO 15 /* seed value for status register */ #define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \ diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h index 46f4e5351b2a..847e3bbe387f 100644 --- a/arch/arc/include/asm/mcip.h +++ b/arch/arc/include/asm/mcip.h @@ -39,8 +39,8 @@ struct mcip_cmd { #define CMD_DEBUG_SET_MASK 0x34 #define CMD_DEBUG_SET_SELECT 0x36 -#define CMD_GRTC_READ_LO 0x42 -#define CMD_GRTC_READ_HI 0x43 +#define CMD_GFRC_READ_LO 0x42 +#define CMD_GFRC_READ_HI 0x43 #define CMD_IDU_ENABLE 0x71 #define CMD_IDU_DISABLE 0x72 diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 57af2f05ae84..d426d4215513 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -179,37 +179,44 @@ #define __S111 PAGE_U_X_W_R /**************************************************************** - * Page Table Lookup split + * 2 tier (PGD:PTE) software page walker * - * We implement 2 tier paging and since this is all software, we are free - * to customize the span of a PGD / PTE entry to suit us - * - * 32 bit virtual address + * [31] 32 bit virtual address [0] * ------------------------------------------------------- - * | BITS_FOR_PGD | BITS_FOR_PTE | BITS_IN_PAGE | + * | | <------------ PGDIR_SHIFT ----------> | + * | | | + * | BITS_FOR_PGD | BITS_FOR_PTE | <-- PAGE_SHIFT --> | * ------------------------------------------------------- * | | | * | | --> off in page frame - * | | * | ---> index into Page Table - * | * ----> index into Page Directory + * + * In a single page size configuration, only PAGE_SHIFT is fixed + * So both PGD and PTE sizing can be tweaked + * e.g. 8K page (PAGE_SHIFT 13) can have + * - PGDIR_SHIFT 21 -> 11:8:13 address split + * - PGDIR_SHIFT 24 -> 8:11:13 address split + * + * If Super Page is configured, PGDIR_SHIFT becomes fixed too, + * so the sizing flexibility is gone. */ -#define BITS_IN_PAGE PAGE_SHIFT - -/* Optimal Sizing of Pg Tbl - based on MMU page size */ -#if defined(CONFIG_ARC_PAGE_SIZE_8K) -#define BITS_FOR_PTE 8 /* 11:8:13 */ -#elif defined(CONFIG_ARC_PAGE_SIZE_16K) -#define BITS_FOR_PTE 8 /* 10:8:14 */ -#elif defined(CONFIG_ARC_PAGE_SIZE_4K) -#define BITS_FOR_PTE 9 /* 11:9:12 */ +#if defined(CONFIG_ARC_HUGEPAGE_16M) +#define PGDIR_SHIFT 24 +#elif defined(CONFIG_ARC_HUGEPAGE_2M) +#define PGDIR_SHIFT 21 +#else +/* + * Only Normal page support so "hackable" (see comment above) + * Default value provides 11:8:13 (8K), 11:9:12 (4K) + */ +#define PGDIR_SHIFT 21 #endif -#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE) +#define BITS_FOR_PTE (PGDIR_SHIFT - PAGE_SHIFT) +#define BITS_FOR_PGD (32 - PGDIR_SHIFT) -#define PGDIR_SHIFT (32 - BITS_FOR_PGD) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */ #define PGDIR_MASK (~(PGDIR_SIZE-1)) diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index cbfec79137bf..b17830294706 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -211,7 +211,11 @@ debug_marker_syscall: ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig ; entry was via Exception in DS which got preempted in kernel). ; -; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling +; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround +; +; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline +; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly + .Lintr_ret_to_delay_slot: debug_marker_ds: @@ -222,18 +226,23 @@ debug_marker_ds: ld r2, [sp, PT_ret] ld r3, [sp, PT_status32] + ; STAT32 for Int return created from scratch + ; (No delay dlot, disable Further intr in trampoline) + bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK st r0, [sp, PT_status32] mov r1, .Lintr_ret_to_delay_slot_2 st r1, [sp, PT_ret] + ; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots st r2, [sp, 0] st r3, [sp, 4] b .Lisr_ret_fast_path .Lintr_ret_to_delay_slot_2: + ; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP sub sp, sp, SZ_PT_REGS st r9, [sp, -4] @@ -243,11 +252,19 @@ debug_marker_ds: ld r9, [sp, 4] sr r9, [erstatus] + ; restore AUX_USER_SP if returning to U mode + bbit0 r9, STATUS_U_BIT, 1f + ld r9, [sp, PT_sp] + sr r9, [AUX_USER_SP] + +1: ld r9, [sp, 8] sr r9, [erbta] ld r9, [sp, -4] add sp, sp, SZ_PT_REGS + + ; return from pure kernel mode to delay slot rtie END(ret_from_exception) diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 0394f9f61b46..942526322ae7 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -14,6 +14,8 @@ #include <linux/irqchip.h> #include <asm/irq.h> +static int irq_prio; + /* * Early Hardware specific Interrupt setup * -Called very early (start_kernel -> setup_arch -> setup_processor) @@ -24,6 +26,14 @@ void arc_init_IRQ(void) { unsigned int tmp; + struct irq_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8; +#else + unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3; +#endif + } irq_bcr; + struct aux_irq_ctrl { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int res3:18, save_idx_regs:1, res2:1, @@ -46,28 +56,25 @@ void arc_init_IRQ(void) WRITE_AUX(AUX_IRQ_CTRL, ictrl); - /* setup status32, don't enable intr yet as kernel doesn't want */ - tmp = read_aux_reg(0xa); - tmp |= ISA_INIT_STATUS_BITS; - tmp &= ~STATUS_IE_MASK; - asm volatile("flag %0 \n"::"r"(tmp)); - /* * ARCv2 core intc provides multiple interrupt priorities (upto 16). * Typical builds though have only two levels (0-high, 1-low) * Linux by default uses lower prio 1 for most irqs, reserving 0 for * NMI style interrupts in future (say perf) - * - * Read the intc BCR to confirm that Linux default priority is avail - * in h/w - * - * Note: - * IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level - * is 0 based. */ - tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF; - if (ARCV2_IRQ_DEF_PRIO > tmp) - panic("Linux default irq prio incorrect\n"); + + READ_BCR(ARC_REG_IRQ_BCR, irq_bcr); + + irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */ + pr_info("archs-intc\t: %d priority levels (default %d)%s\n", + irq_prio + 1, irq_prio, + irq_bcr.firq ? " FIRQ (not used)":""); + + /* setup status32, don't enable intr yet as kernel doesn't want */ + tmp = read_aux_reg(0xa); + tmp |= STATUS_AD_MASK | (irq_prio << 1); + tmp &= ~STATUS_IE_MASK; + asm volatile("flag %0 \n"::"r"(tmp)); } static void arcv2_irq_mask(struct irq_data *data) @@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data) { /* set default priority */ write_aux_reg(AUX_IRQ_SELECT, data->irq); - write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); + write_aux_reg(AUX_IRQ_PRIORITY, irq_prio); /* * hw auto enables (linux unmask) all by default diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index bd237acdf4f2..bc771f58fefb 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -96,13 +96,13 @@ static void mcip_probe_n_setup(void) #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int pad3:8, idu:1, llm:1, num_cores:6, - iocoh:1, grtc:1, dbg:1, pad2:1, + iocoh:1, gfrc:1, dbg:1, pad2:1, msg:1, sem:1, ipi:1, pad:1, ver:8; #else unsigned int ver:8, pad:1, ipi:1, sem:1, msg:1, - pad2:1, dbg:1, grtc:1, iocoh:1, + pad2:1, dbg:1, gfrc:1, iocoh:1, num_cores:6, llm:1, idu:1, pad3:8; #endif @@ -116,7 +116,7 @@ static void mcip_probe_n_setup(void) IS_AVAIL1(mp.ipi, "IPI "), IS_AVAIL1(mp.idu, "IDU "), IS_AVAIL1(mp.dbg, "DEBUG "), - IS_AVAIL1(mp.grtc, "GRTC")); + IS_AVAIL1(mp.gfrc, "GFRC")); idu_detected = mp.idu; @@ -125,8 +125,8 @@ static void mcip_probe_n_setup(void) __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf); } - if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc) - panic("kernel trying to use non-existent GRTC\n"); + if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc) + panic("kernel trying to use non-existent GFRC\n"); } struct plat_smp_ops plat_smp_ops = { diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index e1b87444ea9a..a7edceba5f84 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -45,6 +45,7 @@ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; static void read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; + struct bcr_timer timer; struct bcr_generic bcr; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; unsigned long perip_space; @@ -53,7 +54,11 @@ static void read_arc_build_cfg_regs(void) READ_BCR(AUX_IDENTITY, cpu->core); READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa); - READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers); + READ_BCR(ARC_REG_TIMERS_BCR, timer); + cpu->extn.timer0 = timer.t0; + cpu->extn.timer1 = timer.t1; + cpu->extn.rtc = timer.rtc; + cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE); READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space); @@ -208,9 +213,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) (unsigned int)(arc_get_core_freq() / 10000) % 100); n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ", - IS_AVAIL1(cpu->timers.t0, "Timer0 "), - IS_AVAIL1(cpu->timers.t1, "Timer1 "), - IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ", + IS_AVAIL1(cpu->extn.timer0, "Timer0 "), + IS_AVAIL1(cpu->extn.timer1, "Timer1 "), + IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ", CONFIG_ARC_HAS_RTC)); n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s", @@ -293,13 +298,13 @@ static void arc_chk_core_config(void) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; int fpu_enabled; - if (!cpu->timers.t0) + if (!cpu->extn.timer0) panic("Timer0 is not present!\n"); - if (!cpu->timers.t1) + if (!cpu->extn.timer1) panic("Timer1 is not present!\n"); - if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc) + if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc) panic("RTC is not present\n"); #ifdef CONFIG_ARC_HAS_DCCM @@ -334,6 +339,7 @@ static void arc_chk_core_config(void) panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n"); if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic && + IS_ENABLED(CONFIG_ARC_HAS_LLSC) && !IS_ENABLED(CONFIG_ARC_STAR_9000923308)) panic("llock/scond livelock workaround missing\n"); } diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index dfad287f1db1..156d9833ff84 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -62,7 +62,7 @@ /********** Clock Source Device *********/ -#ifdef CONFIG_ARC_HAS_GRTC +#ifdef CONFIG_ARC_HAS_GFRC static int arc_counter_setup(void) { @@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs) local_irq_save(flags); - __mcip_cmd(CMD_GRTC_READ_LO, 0); + __mcip_cmd(CMD_GFRC_READ_LO, 0); stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK); - __mcip_cmd(CMD_GRTC_READ_HI, 0); + __mcip_cmd(CMD_GFRC_READ_HI, 0); stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK); local_irq_restore(flags); @@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs) } static struct clocksource arc_counter = { - .name = "ARConnect GRTC", + .name = "ARConnect GFRC", .rating = 400, .read = arc_counter_read, .mask = CLOCKSOURCE_MASK(64), diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 04885f9f959e..1fafaad516ba 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -439,6 +439,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index df955ba4dc62..92068fbf8b57 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -73,7 +73,7 @@ global_timer: timer@48240200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x48240200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -81,7 +81,7 @@ local_timer: timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -290,6 +290,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 64d43325bcbc..ecd09ab6d581 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -590,8 +590,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; @@ -599,7 +597,7 @@ * 0x264 represents the offset of padconf register of * gpio3_22 from am43xx_pinmux base. */ - interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, <&am43xx_pinmux 0x264>; interrupt-names = "tsc", "wakeup"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 746fd2b17958..d580e2b70f9a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -491,7 +491,7 @@ pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; - interrupts = <17 0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index c53882643ae9..8d93882dc8d5 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -167,7 +167,7 @@ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -492,14 +492,14 @@ pinctrl-names = "default"; pinctrl-0 = <&qspi1_pins>; - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; spi_flash: spi_flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; /* CS0 */ - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; partition@0 { label = "uboot"; @@ -559,13 +559,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -588,7 +588,7 @@ }; &usb2 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &mcasp3 { diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 77bb8e17401a..988e99632d49 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -25,8 +25,8 @@ &dra7_pmx_core { uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; @@ -108,9 +108,9 @@ pinctrl-0 = <&i2c5_pins_default>; clock-frequency = <400000>; - eeprom_base: atmel@50 { + eeprom_base: atmel@54 { compatible = "atmel,24c08"; - reg = <0x50>; + reg = <0x54>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 13cf69a8d0fb..fb9e1bbf2338 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -152,6 +152,7 @@ nand-on-flash-bbt; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 77ddff036409..e683856c507c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -114,9 +114,15 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; }; pdmic@f8018000 { @@ -300,6 +306,10 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PC9__GPIO>; + }; + pinctrl_pdmic_default: pdmic_default { pinmux = <PIN_PB26__PDMIC_DAT>, <PIN_PB27__PDMIC_CLK>; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 131614f28e75..569026e8f96c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -86,10 +86,12 @@ macb0: ethernet@f8020000 { phy-mode = "rmii"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; }; @@ -152,6 +154,10 @@ atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_macb0_phy_irq: macb0_phy_irq_0 { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 2d4a33100af6..4e98cda97403 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -160,8 +160,15 @@ }; macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; }; mmc1: mmc@fc000000 { @@ -193,6 +200,10 @@ pinctrl@fc06a000 { board { + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ca4ddf86817a..626c67d66626 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -215,7 +215,7 @@ }; panel: panel { - compatible = "qd,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40", "simple-panel"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 09eed3cea0af..36eec7392ab4 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WVL/VL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -185,38 +186,38 @@ led@1 { label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led@2 { label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led@3 { label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led@4 { label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led@5 { label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; @@ -233,7 +234,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts index f5db16a08597..b13ec20a7088 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WXL/WSXL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -185,12 +186,12 @@ led@1 { label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; led@3 { @@ -200,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; }; @@ -225,15 +226,15 @@ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -256,7 +257,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; hdd_power0: regulator@2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 1db6f2c506cc..8082d64266a3 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -131,6 +131,7 @@ chip-delay = <40>; status = "okay"; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 7fed0bd4f3de..00805322367e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -112,14 +112,6 @@ clock-frequency = <400000>; }; -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; -}; - /* * Only found on the wireless SOM. For the SOM without wireless, the pins for * MMC3 can be routed with jumpers to the second MMC slot on the devkit and @@ -143,6 +135,7 @@ interrupt-parent = <&gpio5>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 888412c63f97..902657d6713b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -130,6 +130,16 @@ }; }; +&gpio8 { + /* TI trees use GPIO instead of msecure, see also muxing */ + p234 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio8_234/msecure"; + }; +}; + &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -213,6 +223,13 @@ >; }; + /* TI trees use GPIO mode; msecure mode does not work reliably? */ + palmas_msecure_pins: palmas_msecure_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ + >; + }; + usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ @@ -278,6 +295,12 @@ &usbhost_wkup_pins >; + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + >; + }; + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ @@ -345,6 +368,8 @@ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; extcon_usb3: palmas_usb { compatible = "ti,palmas-usb-vid"; @@ -358,6 +383,14 @@ #clock-cells = <0>; }; + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf..420788229e6f 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -162,6 +161,7 @@ led@1 { label = "lswtgl:blue:power"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@2 { @@ -188,7 +188,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b8032bca4621..db1151c18466 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1342,7 +1342,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d0c743853318..27a333eb8987 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -127,22 +127,14 @@ }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { - /* MCCLK */ - pins = "GPIO8_B10"; - ste,output = <0>; - }; - mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13", "GPIO23_D15"; - ste,output = <1>; - }; - mmcsd_default_cfg3 { - /* MCCMD, MCDAT3-0, MCMSFBCLK */ - pins = "GPIO9_A10", "GPIO11_B11", - "GPIO12_A11", "GPIO13_C12", - "GPIO14_B12", "GPIO24_C15"; - ste,input = <1>; + /* + * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 + * MCCMD, MCDAT3-0, MCMSFBCLK + */ + pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12", + "GPIO16_C13", "GPIO23_D15", "GPIO24_C15"; + ste,output = <2>; }; }; }; @@ -802,10 +794,21 @@ clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; - max-frequency = <48000000>; + max-frequency = <400000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + full-pwr-cycle; + /* + * The STw4811 circuit used with the Nomadik strictly + * requires that all of these signal direction pins be + * routed and used for its 4-bit levelshifter. + */ + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 2dc6da70ae59..d7ed252708c5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -16,7 +16,7 @@ */ #include <linux/module.h> #include <linux/kernel.h> - +#include <asm/div64.h> #include <asm/hardware/icst.h> /* @@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div); unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) { - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); + u64 dividend = p->ref * 2 * (u64)(vco.v + 8); + u32 divisor = (vco.r + 2) * p->s2div[vco.s]; + + do_div(dividend, divisor); + return (unsigned long)dividend; } EXPORT_SYMBOL(icst_hz); @@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq) if (f > p->vco_min && f <= p->vco_max) break; + i++; } while (i < 8); if (i >= 8) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 314f6be2dca2..8e8b2ace9b7c 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5427..d18d6b42fcf5 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_KERNMEM_PERMS=y CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y @@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y @@ -290,24 +292,23 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y @@ -354,6 +355,11 @@ CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=m @@ -387,6 +393,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PWM=m +CONFIG_LEDS_PCA963X=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -449,6 +456,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9cda974a3009..d7f1d69daf6d 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -66,32 +65,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) -static inline void __init omap_init_mbox(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct omap_mbox_pdata *pdata; - - oh = omap_hwmod_lookup("mailbox"); - if (!oh) { - pr_err("%s: unable to find hwmod\n", __func__); - return; - } - if (!oh->dev_attr) { - pr_err("%s: hwmod doesn't have valid attrs\n", __func__); - return; - } - - pdata = (struct omap_mbox_pdata *)oh->dev_attr; - pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(pdev)); -} -#else -static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP2PLUS_MBOX */ - static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) @@ -229,7 +202,6 @@ static int __init omap2_init_devices(void) * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); omap_init_aes(); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e781e4fae13a..a935d28443da 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> #include <linux/platform_data/wkup_m3.h> +#include <linux/platform_data/pwm_omap_dmtimer.h> +#include <plat/dmtimer.h> #include "common.h" #include "common-board-devices.h" @@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index eafd120b53f1..1b9f0520dea9 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r2, l2dis_3630 @ may be too distant for plain adr - str r1, [r2] + adrl r3, l2dis_3630_offset @ may be too distant for plain adr + ldr r2, [r3] @ value for offset + str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) - .text -/* Function to call rom code to save secure ram context */ +/* + * Function to call rom code to save secure ram context. This gets + * relocated to SRAM, so it can be all in .data section. Otherwise + * we need to initialize api_params separately. + */ + .data .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack @@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context + .text + /* * ====================== * == Idle entry point == @@ -289,12 +296,6 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -302,11 +303,7 @@ is_dll_in_lock_mode: tst r5, #0x4 bne exit_nonoff_modes @ Return if locked /* wait till dll locks */ - adr r7, kick_counter wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -330,9 +327,6 @@ kick_dll: orr r6, r6, #(1<<3) @ enable dll str r6, [r4] dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter b wait_dll_lock_timed exit_nonoff_modes: @@ -360,15 +354,6 @@ sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 - ENTRY(omap3_do_wfi_sz) .word . - omap3_do_wfi @@ -437,7 +422,9 @@ ENTRY(omap3_restore) cmp r2, #0x0 @ Check if target power state was OFF or RET bne logic_l1_restore - ldr r0, l2dis_3630 + adr r1, l2dis_3630_offset @ address for offset + ldr r0, [r1] @ value for offset + ldr r0, [r1, r0] @ value at l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 @@ -449,12 +436,14 @@ skipl2dis: and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp + adr r0, l2_inv_api_params_offset + ldr r3, [r0] + add r3, r3, r0 @ r3 points to dummy parameters mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, l2_inv_api_params @ r3 points to dummy parameters dsb @ data write barrier dmb @ data memory barrier smc #1 @ call SMI monitor (smi #1) @@ -488,8 +477,8 @@ skipl2dis: b logic_l1_restore .align -l2_inv_api_params: - .word 0x1, 0x00 +l2_inv_api_params_offset: + .long l2_inv_api_params - . l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 @@ -506,7 +495,9 @@ l2_inv_gp: mov r12, #0x2 smc #0 @ Call SMI monitor (smieq) logic_l1_restore: - ldr r1, l2dis_3630 + adr r0, l2dis_3630_offset @ adress for offset + ldr r1, [r0] @ value for offset + ldr r1, [r0, r1] @ value at l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 bne skipl2reen mrc p15, 0, r1, c1, c0, 1 @@ -535,9 +526,17 @@ control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL +l2dis_3630_offset: + .long l2dis_3630 - . + + .data l2dis_3630: .word 0 + .data +l2_inv_api_params: + .word 0x1, 0x00 + /* * Internal functions */ diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9b09d85d811a..c7a3b4aab4b5 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -29,12 +29,6 @@ dsb .endm -ppa_zero_params: - .word 0x0 - -ppa_por_params: - .word 1, 0 - #ifdef CONFIG_ARCH_OMAP4 /* @@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume) beq skip_ns_smp_enable ppa_actrl_retry: mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX - adr r3, ppa_zero_params @ Pointer to parameters + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag mov r6, #0xff @@ -303,7 +299,9 @@ skip_ns_smp_enable: ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] - adr r3, ppa_por_params + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag @@ -328,6 +326,8 @@ skip_l2en: #endif b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . ENDPROC(omap4_cpu_resume) #endif /* CONFIG_ARCH_OMAP4 */ @@ -380,4 +380,13 @@ ENTRY(omap_do_wfi) nop ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . ENDPROC(omap_do_wfi) + + .data +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index def40a0dd60c..70ab4a25a5f8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_REALVIEW - bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + bool "ARM Ltd. RealView family" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARM_AMBA select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index 65585392655b..6964e8876061 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) virt_to_phys(versatile_secondary_startup)); } -struct smp_operations realview_dt_smp_ops __initdata = { +static const struct smp_operations realview_dt_smp_ops __initconst = { .smp_prepare_cpus = realview_smp_prepare_cpus, .smp_secondary_init = versatile_secondary_init, .smp_boot_secondary = versatile_boot_secondary, diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig index d6a3714b096e..ebe15b93bbe8 100644 --- a/arch/arm/mach-tango/Kconfig +++ b/arch/arm/mach-tango/Kconfig @@ -1,5 +1,6 @@ config ARCH_TANGO - bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7 + bool "Sigma Designs Tango4 (SMP87xx)" + depends on ARCH_MULTI_V7 # Cortex-A9 MPCore r3p0, PL310 r3p2 select ARCH_HAS_HOLES_MEMORYMODEL select ARM_ERRATA_754322 diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c index a18d5a34e2f5..a21f55e000d2 100644 --- a/arch/arm/mach-tango/platsmp.c +++ b/arch/arm/mach-tango/platsmp.c @@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -static struct smp_operations tango_smp_ops __initdata = { +static const struct smp_operations tango_smp_ops __initconst = { .smp_boot_secondary = tango_boot_secondary, }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dd5158eb5872..e5b59ca9debb 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -115,6 +115,7 @@ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi index da7b6e613257..933cba359918 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi @@ -23,9 +23,8 @@ soc0: soc@000000000 { }; }; - dsa: dsa@c7000000 { + dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; @@ -127,7 +126,7 @@ soc0: soc@000000000 { eth0: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [00 00 00 01 00 58]; status = "disabled"; @@ -135,14 +134,14 @@ soc0: soc@000000000 { }; eth1: ethernet@1{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <1>; status = "disabled"; dma-coherent; }; eth2: ethernet@2{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <2>; local-mac-address = [00 00 00 01 00 5a]; status = "disabled"; @@ -150,7 +149,7 @@ soc0: soc@000000000 { }; eth3: ethernet@3{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <3>; local-mac-address = [00 00 00 01 00 5b]; status = "disabled"; @@ -158,7 +157,7 @@ soc0: soc@000000000 { }; eth4: ethernet@4{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <4>; local-mac-address = [00 00 00 01 00 5c]; status = "disabled"; @@ -166,7 +165,7 @@ soc0: soc@000000000 { }; eth5: ethernet@5{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <5>; local-mac-address = [00 00 00 01 00 5d]; status = "disabled"; @@ -174,7 +173,7 @@ soc0: soc@000000000 { }; eth6: ethernet@6{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <6>; local-mac-address = [00 00 00 01 00 5e]; status = "disabled"; @@ -182,7 +181,7 @@ soc0: soc@000000000 { }; eth7: ethernet@7{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <7>; local-mac-address = [00 00 00 01 00 5f]; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 7dfe1c085966..62f33fc84e3e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -12,6 +12,8 @@ rtc1 = "/rtc@0,7000e000"; }; + chosen { }; + memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 007a69fc4f40..5f3ab8c1db55 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; asm volatile("// futex_atomic_cmpxchg_inatomic\n" +ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN) " prfm pstl1strm, %2\n" "1: ldxr %w1, %2\n" " sub %w3, %w1, %w4\n" @@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .align 3\n" " .quad 1b, 4b, 2b, 4b\n" " .popsection\n" +ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) : "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp) : "r" (oldval), "r" (newval), "Ir" (-EFAULT) : "memory"); diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 738a95f93e49..bef6e9243c63 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -182,6 +182,7 @@ #define CPTR_EL2_TCPAC (1 << 31) #define CPTR_EL2_TTA (1 << 20) #define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT) +#define CPTR_EL2_DEFAULT 0x000033ff /* Hyp Debug Configuration Register bits */ #define MDCR_EL2_TDRA (1 << 11) diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 3066328cd86b..779a5872a2c5 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -127,10 +127,14 @@ static inline unsigned long *vcpu_spsr(const struct kvm_vcpu *vcpu) static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu) { - u32 mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK; + u32 mode; - if (vcpu_mode_is_32bit(vcpu)) + if (vcpu_mode_is_32bit(vcpu)) { + mode = *vcpu_cpsr(vcpu) & COMPAT_PSR_MODE_MASK; return mode > COMPAT_PSR_MODE_USR; + } + + mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK; return mode != PSR_MODE_EL0t; } diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index 9b2f5a9d019d..ae615b9d9a55 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -39,6 +39,7 @@ #ifndef __ASSEMBLY__ +#include <linux/personality.h> /* for READ_IMPLIES_EXEC */ #include <asm/pgtable-types.h> extern void __cpu_clear_user_page(void *p, unsigned long user); diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index ca8f5a5e2f96..f0e7bdfae134 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -36,7 +36,11 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu) write_sysreg(val, hcr_el2); /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ write_sysreg(1 << 15, hstr_el2); - write_sysreg(CPTR_EL2_TTA | CPTR_EL2_TFP, cptr_el2); + + val = CPTR_EL2_DEFAULT; + val |= CPTR_EL2_TTA | CPTR_EL2_TFP; + write_sysreg(val, cptr_el2); + write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2); } @@ -45,7 +49,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) write_sysreg(HCR_RW, hcr_el2); write_sysreg(0, hstr_el2); write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2); - write_sysreg(0, cptr_el2); + write_sysreg(CPTR_EL2_DEFAULT, cptr_el2); } static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index 648112e90ed5..4d1ac81870d2 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -27,7 +27,11 @@ #define PSTATE_FAULT_BITS_64 (PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \ PSR_I_BIT | PSR_D_BIT) -#define EL1_EXCEPT_SYNC_OFFSET 0x200 + +#define CURRENT_EL_SP_EL0_VECTOR 0x0 +#define CURRENT_EL_SP_ELx_VECTOR 0x200 +#define LOWER_EL_AArch64_VECTOR 0x400 +#define LOWER_EL_AArch32_VECTOR 0x600 static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset) { @@ -97,6 +101,34 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, *fsr = 0x14; } +enum exception_type { + except_type_sync = 0, + except_type_irq = 0x80, + except_type_fiq = 0x100, + except_type_serror = 0x180, +}; + +static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type) +{ + u64 exc_offset; + + switch (*vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT)) { + case PSR_MODE_EL1t: + exc_offset = CURRENT_EL_SP_EL0_VECTOR; + break; + case PSR_MODE_EL1h: + exc_offset = CURRENT_EL_SP_ELx_VECTOR; + break; + case PSR_MODE_EL0t: + exc_offset = LOWER_EL_AArch64_VECTOR; + break; + default: + exc_offset = LOWER_EL_AArch32_VECTOR; + } + + return vcpu_sys_reg(vcpu, VBAR_EL1) + exc_offset + type; +} + static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr) { unsigned long cpsr = *vcpu_cpsr(vcpu); @@ -108,8 +140,8 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr *vcpu_spsr(vcpu) = cpsr; *vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu); + *vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync); *vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64; - *vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET; vcpu_sys_reg(vcpu, FAR_EL1) = addr; @@ -143,8 +175,8 @@ static void inject_undef64(struct kvm_vcpu *vcpu) *vcpu_spsr(vcpu) = cpsr; *vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu); + *vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync); *vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64; - *vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET; /* * Build an unknown exception, depending on the instruction diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index eec3598b4184..2e90371cfb37 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1007,10 +1007,9 @@ static int emulate_cp(struct kvm_vcpu *vcpu, if (likely(r->access(vcpu, params, r))) { /* Skip instruction, since it was emulated */ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + /* Handled */ + return 0; } - - /* Handled */ - return 0; } /* Not handled */ @@ -1043,7 +1042,7 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu, } /** - * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access + * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access * @vcpu: The VCPU pointer * @run: The kvm_run struct */ @@ -1095,7 +1094,7 @@ out: } /** - * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access + * kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access * @vcpu: The VCPU pointer * @run: The kvm_run struct */ diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index cf6240741134..0795c3a36d8f 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -14,6 +14,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/vmalloc.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> @@ -44,6 +45,7 @@ static int change_memory_common(unsigned long addr, int numpages, unsigned long end = start + size; int ret; struct page_change_data data; + struct vm_struct *area; if (!PAGE_ALIGNED(addr)) { start &= PAGE_MASK; @@ -51,10 +53,23 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } - if (start < MODULES_VADDR || start >= MODULES_END) - return -EINVAL; - - if (end < MODULES_VADDR || end >= MODULES_END) + /* + * Kernel VA mappings are always live, and splitting live section + * mappings into page mappings may cause TLB conflicts. This means + * we have to ensure that changing the permission bits of the range + * we are operating on does not result in such splitting. + * + * Let's restrict ourselves to mappings created by vmalloc (or vmap). + * Those are guaranteed to consist entirely of page mappings, and + * splitting is never needed. + * + * So check whether the [addr, addr + size) interval is entirely + * covered by precisely one VM area that has the VM_ALLOC flag set. + */ + area = find_vm_area((void *)addr); + if (!area || + end > (unsigned long)area->addr + area->size || + !(area->flags & VM_ALLOC)) return -EINVAL; if (!numpages) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 836ac5a963c8..2841c0a3fd3b 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -276,6 +276,7 @@ source "kernel/Kconfig.preempt" config SMP bool "Symmetric multi-processing support" + depends on MMU ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 57a945e832f4..74a3db92da1b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2085,7 +2085,7 @@ config PAGE_SIZE_32KB config PAGE_SIZE_64KB bool "64kB" - depends on !CPU_R3000 && !CPU_TX39XX + depends on !CPU_R3000 && !CPU_TX39XX && !CPU_R6000 help Using 64kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi index 459b9b252c3b..d61b1616b604 100644 --- a/arch/mips/boot/dts/brcm/bcm6328.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi @@ -74,6 +74,7 @@ timer: timer@10000040 { compatible = "syscon"; reg = <0x10000040 0x2c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi index 4fc7ecee273c..1a7efa883c5e 100644 --- a/arch/mips/boot/dts/brcm/bcm7125.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi @@ -98,6 +98,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7125-sun-top-ctrl", "syscon"; reg = <0x404000 0x60c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi index a3039bb53477..d4bf52cfcf17 100644 --- a/arch/mips/boot/dts/brcm/bcm7346.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi @@ -118,6 +118,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi index 4274ff41ec21..8e2501694d03 100644 --- a/arch/mips/boot/dts/brcm/bcm7358.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi @@ -112,6 +112,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7358-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi index 0dcc9163c27b..7e5f76040fb8 100644 --- a/arch/mips/boot/dts/brcm/bcm7360.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -112,6 +112,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7360-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi index 2f3f9fc2c478..c739ea77acb0 100644 --- a/arch/mips/boot/dts/brcm/bcm7362.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi @@ -118,6 +118,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7362-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi index bee221b3b568..5f55d0a50a28 100644 --- a/arch/mips/boot/dts/brcm/bcm7420.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi @@ -99,6 +99,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; reg = <0x404000 0x60c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi index 571f30f52e3f..e24d41ab4e30 100644 --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi @@ -100,6 +100,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi index 614ee211f71a..8b9432cc062b 100644 --- a/arch/mips/boot/dts/brcm/bcm7435.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi @@ -114,6 +114,7 @@ sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; + little-endian; }; reboot { diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index cefb7a596878..e090fc388e02 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -227,7 +227,7 @@ struct mips_elf_abiflags_v0 { int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ __res = 0; \ @@ -258,7 +258,7 @@ struct mips_elf_abiflags_v0 { int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ __res = 0; \ @@ -285,6 +285,11 @@ struct mips_elf_abiflags_v0 { #endif /* !defined(ELF_ARCH) */ +#define mips_elf_check_machine(x) ((x)->e_machine == EM_MIPS) + +#define vmcore_elf32_check_arch mips_elf_check_machine +#define vmcore_elf64_check_arch mips_elf_check_machine + struct mips_abi; extern struct mips_abi mips_abi; diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 9cbf383b8834..f06f97bd62df 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -179,6 +179,10 @@ static inline void lose_fpu_inatomic(int save, struct task_struct *tsk) if (save) _save_fp(tsk); __disable_fpu(); + } else { + /* FPU should not have been left enabled with no owner */ + WARN(read_c0_status() & ST0_CU1, + "Orphaned FPU left enabled"); } KSTK_STATUS(tsk) &= ~ST0_CU1; clear_tsk_thread_flag(tsk, TIF_USEDFPU); diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h index 8ebd3f579b84..3ed10a8d7865 100644 --- a/arch/mips/include/asm/octeon/octeon-feature.h +++ b/arch/mips/include/asm/octeon/octeon-feature.h @@ -128,7 +128,8 @@ static inline int octeon_has_feature(enum octeon_feature feature) case OCTEON_FEATURE_PCIE: return OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX) - || OCTEON_IS_MODEL(OCTEON_CN6XXX); + || OCTEON_IS_MODEL(OCTEON_CN6XXX) + || OCTEON_IS_MODEL(OCTEON_CN7XXX); case OCTEON_FEATURE_SRIO: return OCTEON_IS_MODEL(OCTEON_CN63XX) diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 3f832c3dd8f5..041153f5cf93 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -45,7 +45,7 @@ extern unsigned int vced_count, vcei_count; * User space process size: 2GB. This is hardcoded into a few places, * so don't change it unless you know what you are doing. */ -#define TASK_SIZE 0x7fff8000UL +#define TASK_SIZE 0x80000000UL #endif #define STACK_TOP_MAX TASK_SIZE diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index a71da576883c..eebf39549606 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -289,7 +289,7 @@ .set reorder .set noat mfc0 a0, CP0_STATUS - li v1, 0xff00 + li v1, ST0_CU1 | ST0_IM ori a0, STATMASK xori a0, STATMASK mtc0 a0, CP0_STATUS @@ -330,7 +330,7 @@ ori a0, STATMASK xori a0, STATMASK mtc0 a0, CP0_STATUS - li v1, 0xff00 + li v1, ST0_CU1 | ST0_FR | ST0_IM and a0, v1 LONG_L v0, PT_STATUS(sp) nor v1, $0, v1 diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h index 6499d93ae68d..47bc45a67e9b 100644 --- a/arch/mips/include/asm/syscall.h +++ b/arch/mips/include/asm/syscall.h @@ -101,10 +101,8 @@ static inline void syscall_get_arguments(struct task_struct *task, /* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */ if ((config_enabled(CONFIG_32BIT) || test_tsk_thread_flag(task, TIF_32BIT_REGS)) && - (regs->regs[2] == __NR_syscall)) { + (regs->regs[2] == __NR_syscall)) i++; - n++; - } while (n--) ret |= mips_get_syscall_arg(args++, task, regs, i++); diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 90f03a7da665..3129795de940 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -380,16 +380,17 @@ #define __NR_userfaultfd (__NR_Linux + 357) #define __NR_membarrier (__NR_Linux + 358) #define __NR_mlock2 (__NR_Linux + 359) +#define __NR_copy_file_range (__NR_Linux + 360) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 359 +#define __NR_Linux_syscalls 360 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 359 +#define __NR_O32_Linux_syscalls 360 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -717,16 +718,17 @@ #define __NR_userfaultfd (__NR_Linux + 317) #define __NR_membarrier (__NR_Linux + 318) #define __NR_mlock2 (__NR_Linux + 319) +#define __NR_copy_file_range (__NR_Linux + 320) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 319 +#define __NR_Linux_syscalls 320 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 319 +#define __NR_64_Linux_syscalls 320 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1058,15 +1060,16 @@ #define __NR_userfaultfd (__NR_Linux + 321) #define __NR_membarrier (__NR_Linux + 322) #define __NR_mlock2 (__NR_Linux + 323) +#define __NR_copy_file_range (__NR_Linux + 324) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 323 +#define __NR_Linux_syscalls 324 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 323 +#define __NR_N32_Linux_syscalls 324 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index 1188e00bb120..1b992c6e3d8e 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -35,7 +35,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ __res = 0; \ diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index 928767858b86..abd3affe5fb3 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -47,7 +47,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; int __res = 1; \ struct elfhdr *__h = (hdr); \ \ - if (__h->e_machine != EM_MIPS) \ + if (!mips_elf_check_machine(__h)) \ __res = 0; \ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ __res = 0; \ diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index f2975d4d1e44..eddd5fd6fdfa 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -65,12 +65,10 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK); status |= KU_USER; regs->cp0_status = status; + lose_fpu(0); + clear_thread_flag(TIF_MSA_CTX_LIVE); clear_used_math(); - clear_fpu_owner(); init_dsp(); - clear_thread_flag(TIF_USEDMSA); - clear_thread_flag(TIF_MSA_CTX_LIVE); - disable_msa(); regs->cp0_epc = pc; regs->regs[29] = sp; } diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 2d23c834ba96..a56317444bda 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -595,3 +595,4 @@ EXPORT(sys_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range /* 4360 */ diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index deac63315d0e..2b2dc14610d0 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -433,4 +433,5 @@ EXPORT(sys_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range /* 5320 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 5a69eb48d0a8..2bf5c8593d91 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -423,4 +423,5 @@ EXPORT(sysn32_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index e4b6d7c97822..c5b759e584c7 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -578,4 +578,5 @@ EXPORT(sys32_call_table) PTR sys_userfaultfd PTR sys_membarrier PTR sys_mlock2 + PTR sys_copy_file_range /* 4360 */ .size sys32_call_table,.-sys32_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 569a7d5242dd..5fdaf8bdcd2e 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -782,6 +782,7 @@ static inline void prefill_possible_map(void) {} void __init setup_arch(char **cmdline_p) { cpu_probe(); + mips_cm_probe(); prom_init(); setup_early_fdc_console(); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index bafcb7ad5c85..ae790c575d4f 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -663,7 +663,7 @@ static int simulate_rdhwr_normal(struct pt_regs *regs, unsigned int opcode) return -1; } -static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned short opcode) +static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned int opcode) { if ((opcode & MM_POOL32A_FUNC) == MM_RDHWR) { int rd = (opcode & MM_RS) >> 16; @@ -1119,11 +1119,12 @@ no_r2_instr: if (get_isa16_mode(regs->cp0_epc)) { unsigned short mmop[2] = { 0 }; - if (unlikely(get_user(mmop[0], epc) < 0)) + if (unlikely(get_user(mmop[0], (u16 __user *)epc + 0) < 0)) status = SIGSEGV; - if (unlikely(get_user(mmop[1], epc) < 0)) + if (unlikely(get_user(mmop[1], (u16 __user *)epc + 1) < 0)) status = SIGSEGV; - opcode = (mmop[0] << 16) | mmop[1]; + opcode = mmop[0]; + opcode = (opcode << 16) | mmop[1]; if (status < 0) status = simulate_rdhwr_mm(regs, opcode); @@ -1369,26 +1370,12 @@ asmlinkage void do_cpu(struct pt_regs *regs) if (unlikely(compute_return_epc(regs) < 0)) break; - if (get_isa16_mode(regs->cp0_epc)) { - unsigned short mmop[2] = { 0 }; - - if (unlikely(get_user(mmop[0], epc) < 0)) - status = SIGSEGV; - if (unlikely(get_user(mmop[1], epc) < 0)) - status = SIGSEGV; - opcode = (mmop[0] << 16) | mmop[1]; - - if (status < 0) - status = simulate_rdhwr_mm(regs, opcode); - } else { + if (!get_isa16_mode(regs->cp0_epc)) { if (unlikely(get_user(opcode, epc) < 0)) status = SIGSEGV; if (!cpu_has_llsc && status < 0) status = simulate_llsc(regs, opcode); - - if (status < 0) - status = simulate_rdhwr_normal(regs, opcode); } if (status < 0) diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 3bd0597d9c3d..249647578e58 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -181,10 +181,6 @@ static int __init mips_sc_probe_cm3(void) return 1; } -void __weak platform_early_l2_init(void) -{ -} - static inline int __init mips_sc_probe(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -194,12 +190,6 @@ static inline int __init mips_sc_probe(void) /* Mark as not present until probe completed */ c->scache.flags |= MIPS_CACHE_NOT_PRESENT; - /* - * Do we need some platform specific probing before - * we configure L2? - */ - platform_early_l2_init(); - if (mips_cm_revision() >= CM_REV_CM3) return mips_sc_probe_cm3(); diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 571148c5fd0b..dc2c5214809d 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -293,7 +293,6 @@ mips_pci_controller: console_config(); #endif /* Early detection of CMP support */ - mips_cm_probe(); mips_cpc_probe(); if (!register_cps_smp_ops()) @@ -304,10 +303,3 @@ mips_pci_controller: return; register_up_smp_ops(); } - -void platform_early_l2_init(void) -{ - /* L2 configuration lives in the CM3 */ - if (mips_cm_revision() >= CM_REV_CM3) - mips_cm_probe(); -} diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c index a009ee458934..1ae932c2d78b 100644 --- a/arch/mips/pci/pci-mt7620.c +++ b/arch/mips/pci/pci-mt7620.c @@ -297,12 +297,12 @@ static int mt7620_pci_probe(struct platform_device *pdev) return PTR_ERR(rstpcie0); bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res); - if (!bridge_base) - return -ENOMEM; + if (IS_ERR(bridge_base)) + return PTR_ERR(bridge_base); pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res); - if (!pcie_base) - return -ENOMEM; + if (IS_ERR(pcie_base)) + return PTR_ERR(pcie_base); iomem_resource.start = 0; iomem_resource.end = ~0; diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h index e13d41c392ae..f878bec23576 100644 --- a/arch/um/include/asm/page.h +++ b/arch/um/include/asm/page.h @@ -34,21 +34,18 @@ struct page; #if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64BIT) -typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32)) - -#define pte_get_bits(pte, bits) ((pte).pte_low & (bits)) -#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits)) -#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits)) -#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \ - smp_wmb(); \ - (to).pte_low = (from).pte_low; }) -#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high) -#define pte_set_val(pte, phys, prot) \ - ({ (pte).pte_high = (phys) >> 32; \ - (pte).pte_low = (phys) | pgprot_val(prot); }) +#define pte_val(p) ((p).pte) + +#define pte_get_bits(p, bits) ((p).pte & (bits)) +#define pte_set_bits(p, bits) ((p).pte |= (bits)) +#define pte_clear_bits(p, bits) ((p).pte &= ~(bits)) +#define pte_copy(to, from) ({ (to).pte = (from).pte; }) +#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE)) +#define pte_set_val(p, phys, prot) \ + ({ (p).pte = (phys) | pgprot_val(prot); }) #define pmd_val(x) ((x).pmd) #define __pmd(x) ((pmd_t) { (x) } ) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9af2e6338400..ab2ed5328f0a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -475,6 +475,7 @@ config X86_UV depends on X86_64 depends on X86_EXTENDED_PLATFORM depends on NUMA + depends on EFI depends on X86_X2APIC depends on PCI ---help--- diff --git a/arch/x86/crypto/chacha20-ssse3-x86_64.S b/arch/x86/crypto/chacha20-ssse3-x86_64.S index 712b13047b41..3a33124e9112 100644 --- a/arch/x86/crypto/chacha20-ssse3-x86_64.S +++ b/arch/x86/crypto/chacha20-ssse3-x86_64.S @@ -157,7 +157,9 @@ ENTRY(chacha20_4block_xor_ssse3) # done with the slightly better performing SSSE3 byte shuffling, # 7/12-bit word rotation uses traditional shift+OR. - sub $0x40,%rsp + mov %rsp,%r11 + sub $0x80,%rsp + and $~63,%rsp # x0..15[0-3] = s0..3[0..3] movq 0x00(%rdi),%xmm1 @@ -620,6 +622,6 @@ ENTRY(chacha20_4block_xor_ssse3) pxor %xmm1,%xmm15 movdqu %xmm15,0xf0(%rsi) - add $0x40,%rsp + mov %r11,%rsp ret ENDPROC(chacha20_4block_xor_ssse3) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 2d5a50cb61a2..20c11d1aa4cc 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -766,7 +766,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); * Return saved PC of a blocked thread. * What is this good for? it will be always the scheduler or ret_from_fork. */ -#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8)) +#define thread_saved_pc(t) READ_ONCE_NOCHECK(*(unsigned long *)((t)->thread.sp - 8)) #define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1) extern unsigned long KSTK_ESP(struct task_struct *task); diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 42982b26e32b..740d7ac03a55 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -173,10 +173,10 @@ static __init int setup_hugepagesz(char *opt) } __setup("hugepagesz=", setup_hugepagesz); -#ifdef CONFIG_CMA +#if (defined(CONFIG_MEMORY_ISOLATION) && defined(CONFIG_COMPACTION)) || defined(CONFIG_CMA) static __init int gigantic_pages_init(void) { - /* With CMA we can allocate gigantic pages at runtime */ + /* With compaction or CMA we can allocate gigantic pages at runtime */ if (cpu_has_gbpages && !size_to_hstate(1UL << PUD_SHIFT)) hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT); return 0; diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index c3b3f653ed0c..d04f8094bc23 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -469,7 +469,7 @@ static void __init numa_clear_kernel_node_hotplug(void) { int i, nid; nodemask_t numa_kernel_nodes = NODE_MASK_NONE; - unsigned long start, end; + phys_addr_t start, end; struct memblock_region *r; /* |