diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/sh/Kconfig | 1 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-cayman.c | 94 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-sh5.c | 93 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh5.c | 452 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh5.h | 10 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci.c | 2 |
7 files changed, 271 insertions, 383 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c0797b4aadbb..1ad3ce540021 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -512,6 +512,7 @@ config SH_SIMULATOR config SH_CAYMAN bool "Hitachi Cayman" depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI config SH_HARP bool "ST50 Harp" diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index fba6b5ba0b3a..172e81db9530 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o +obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o @@ -20,3 +21,4 @@ obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o +obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c new file mode 100644 index 000000000000..980275ffa30b --- /dev/null +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -0,0 +1,94 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <asm/cpu/irq.h> +#include "pci-sh5.h" + +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int result = -1; + + /* The complication here is that the PCI IRQ lines from the Cayman's 2 + 5V slots get into the CPU via a different path from the IRQ lines + from the 3 3.3V slots. Thus, we have to detect whether the card's + interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' + at the point where we cross from 5V to 3.3V is not the normal case. + + The added complication is that we don't know that the 5V slots are + always bus 2, because a card containing a PCI-PCI bridge may be + plugged into a 3.3V slot, and this changes the bus numbering. + + Also, the Cayman has an intermediate PCI bus that goes a custom + expansion board header (and to the secondary bridge). This bus has + never been used in practice. + + The 1ary onboard PCI-PCI bridge is device 3 on bus 0 + The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of + the 1ary bridge. + */ + + struct slot_pin { + int slot; + int pin; + } path[4]; + int i=0; + + while (dev->bus->number > 0) { + + slot = path[i].slot = PCI_SLOT(dev->devfn); + pin = path[i].pin = bridge_swizzle(pin, slot); + dev = dev->bus->self; + i++; + if (i > 3) panic("PCI path to root bus too long!\n"); + } + + slot = PCI_SLOT(dev->devfn); + /* This is the slot on bus 0 through which the device is eventually + reachable. */ + + /* Now work back up. */ + if ((slot < 3) || (i == 0)) { + /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final + swizzle now. */ + result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; + } else { + i--; + slot = path[i].slot; + pin = path[i].pin; + if (slot > 0) { + panic("PCI expansion bus device found - not handled!\n"); + } else { + if (i > 0) { + /* 5V slots */ + i--; + slot = path[i].slot; + pin = path[i].pin; + /* 'pin' was swizzled earlier wrt slot, don't do it again. */ + result = IRQ_P2INTA + (pin - 1); + } else { + /* IRQ for 2ary PCI-PCI bridge : unused */ + result = -1; + } + } + } + + return result; +} + +struct pci_channel board_pci_channels[] = { + { &sh5_pci_ops, NULL, NULL, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +int __init pcibios_init_platform(void) +{ + return sh5pci_init(__pa(memory_start), + __pa(memory_end) - __pa(memory_start)); +} diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c new file mode 100644 index 000000000000..729e38a6fe07 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -0,0 +1,93 @@ +/* + * Support functions for the SH5 PCI hardware. + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/kernel.h> +#include <linux/rwsem.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <asm/pci.h> +#include <asm/io.h> +#include "pci-sh5.h" + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); + break; + case 2: + *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); + break; + case 4: + *val = SH5PCI_READ(PDR); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); + break; + case 2: + SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); + break; + case 4: + SH5PCI_WRITE(PDR, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sh5_pci_ops = { + .read = sh5pci_read, + .write = sh5pci_write, +}; diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index b4d9534d2b0e..a00a4df8c02d 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -18,40 +18,14 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/types.h> -#include <asm/pci.h> #include <linux/irq.h> - +#include <asm/cpu/irq.h> +#include <asm/pci.h> #include <asm/io.h> -#include <asm/hardware.h> -#include "pci_sh5.h" - -static unsigned long pcicr_virt; -unsigned long pciio_virt; - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); +#include "pci-sh5.h" -char * __devinit pcibios_setup(char *str) -{ - return str; -} +unsigned long pcicr_virt; +unsigned long PCI_IO_AREA; /* Rounds a number UP to the nearest power of two. Used for * sizing the PCI window. @@ -79,31 +53,73 @@ static u32 __init r2p2(u32 num) return tmp; } -extern unsigned long long memory_start, memory_end; +static irqreturn_t pcish5_err_irq(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + unsigned pci_int, pci_air, pci_cir, pci_aint; + + pci_int = SH5PCI_READ(INT); + pci_cir = SH5PCI_READ(CIR); + pci_air = SH5PCI_READ(AIR); -int __init sh5pci_init(unsigned memStart, unsigned memSize) + if (pci_int) { + printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); + printk("PCI INT -> 0x%x\n", pci_int & 0xffff); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(INT, ~0); + } + + pci_aint = SH5PCI_READ(AINT); + if (pci_aint) { + printk("PCI ARB INTERRUPT!\n"); + printk("PCI AINT -> 0x%x\n", pci_aint); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(AINT, ~0); + } + + return IRQ_HANDLED; +} + +static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) +{ + printk("SERR IRQ\n"); + + return IRQ_NONE; +} + +int __init sh5pci_init(unsigned long memStart, unsigned long memSize) { u32 lsr0; u32 uval; + if (request_irq(IRQ_ERR, pcish5_err_irq, + IRQF_DISABLED, "PCI Error",NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); + return -EINVAL; + } + + if (request_irq(IRQ_SERR, pcish5_serr_irq, + IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); + return -EINVAL; + } + pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR"); if (!pcicr_virt) { panic("Unable to remap PCICR\n"); } - pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); - if (!pciio_virt) { + PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); + if (!PCI_IO_AREA) { panic("Unable to remap PCIIO\n"); } - pr_debug("Register base addres is 0x%08lx\n", pcicr_virt); - /* Clear snoop registers */ SH5PCI_WRITE(CSCR0, 0); SH5PCI_WRITE(CSCR1, 0); - pr_debug("Wrote to reg\n"); - /* Switch off interrupts */ SH5PCI_WRITE(INTM, 0); SH5PCI_WRITE(AINTM, 0); @@ -113,16 +129,17 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize) uval = SH5PCI_READ(CR); /* Set command Register */ - SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM); + SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | + CR_PFCS | CR_BMAM); uval=SH5PCI_READ(CR); - pr_debug("CR is actually 0x%08x\n",uval); /* Allow it to be a master */ /* NB - WE DISABLE I/O ACCESS to stop overlap */ /* set WAIT bit to enable stepping, an attempt to improve stability */ SH5PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT); + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_WAIT); /* ** Set translation mapping memory in order to convert the address @@ -143,32 +160,30 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize) SH5PCI_WRITE(IOBR,0x0); - pr_debug("PCI:Writing 0x%08x to IOBR\n",0); - /* Set up a 256K window. Totally pointless waste of address space */ SH5PCI_WRITE(IOBMR,0); - pr_debug("PCI:Writing 0x%08x to IOBMR\n",0); - /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally, - * we would want to map the I/O region somewhere, but it is so big this is not - * that easy! + /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. + * Ideally, we would want to map the I/O region somewhere, but it + * is so big this is not that easy! */ SH5PCI_WRITE(CSR_IBAR0,~0); /* Set memory size value */ memSize = memory_end - memory_start; - /* Now we set up the mbars so the PCI bus can see the memory of the machine */ - if (memSize < (1024 * 1024)) { - printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize); + /* Now we set up the mbars so the PCI bus can see the memory of + * the machine */ + if (memSize < (1024 * 1024)) { + printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n", + memSize); return -EINVAL; } /* Set LSR 0 */ - lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1); + lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : + ((r2p2(memSize) - 0x100000) | 0x1); SH5PCI_WRITE(LSR0, lsr0); - pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0); - /* Set MBAR 0 */ SH5PCI_WRITE(CSR_MBAR0, memory_start); SH5PCI_WRITE(LAR0, memory_start); @@ -177,334 +192,21 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize) SH5PCI_WRITE(LAR1,0); SH5PCI_WRITE(LSR1,0); - pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start); - pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start); - /* Enable the PCI interrupts on the device */ SH5PCI_WRITE(INTM, ~0); SH5PCI_WRITE(AINTM, ~0); SH5PCI_WRITE(PINTM, ~0); - pr_debug("Switching on all error interrupts\n"); - - return(0); -} - -static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = SH5PCI_READ(PDR); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - SH5PCI_WRITE(PDR, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops pci_config_ops = { - .read = sh5pci_read, - .write = sh5pci_write, -}; - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - - -static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) -{ - pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n", - dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin); - return PCI_SLOT(dev->devfn); -} - -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin-1) + slot) % 4) + 1; -} - -u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp) -{ - if (dev->bus->number != 0) { - u8 pin = *pinp; - do { - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - /* Move up the chain of bridges. */ - dev = dev->bus->self; - } while (dev->bus->self); - *pinp = pin; - - /* The slot is the slot of the last bridge. */ - } - - return PCI_SLOT(dev->devfn); -} - -/* This needs to be shunted out of here into the board specific bit */ - -static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int result = -1; - - /* The complication here is that the PCI IRQ lines from the Cayman's 2 - 5V slots get into the CPU via a different path from the IRQ lines - from the 3 3.3V slots. Thus, we have to detect whether the card's - interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' - at the point where we cross from 5V to 3.3V is not the normal case. - - The added complication is that we don't know that the 5V slots are - always bus 2, because a card containing a PCI-PCI bridge may be - plugged into a 3.3V slot, and this changes the bus numbering. - - Also, the Cayman has an intermediate PCI bus that goes a custom - expansion board header (and to the secondary bridge). This bus has - never been used in practice. - - The 1ary onboard PCI-PCI bridge is device 3 on bus 0 - The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge. - */ - - struct slot_pin { - int slot; - int pin; - } path[4]; - int i=0; - - while (dev->bus->number > 0) { - - slot = path[i].slot = PCI_SLOT(dev->devfn); - pin = path[i].pin = bridge_swizzle(pin, slot); - dev = dev->bus->self; - i++; - if (i > 3) panic("PCI path to root bus too long!\n"); - } - - slot = PCI_SLOT(dev->devfn); - /* This is the slot on bus 0 through which the device is eventually - reachable. */ - - /* Now work back up. */ - if ((slot < 3) || (i == 0)) { - /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final - swizzle now. */ - result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; - } else { - i--; - slot = path[i].slot; - pin = path[i].pin; - if (slot > 0) { - panic("PCI expansion bus device found - not handled!\n"); - } else { - if (i > 0) { - /* 5V slots */ - i--; - slot = path[i].slot; - pin = path[i].pin; - /* 'pin' was swizzled earlier wrt slot, don't do it again. */ - result = IRQ_P2INTA + (pin - 1); - } else { - /* IRQ for 2ary PCI-PCI bridge : unused */ - result = -1; - } - } - } - - return result; -} - -static irqreturn_t pcish5_err_irq(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - unsigned pci_int, pci_air, pci_cir, pci_aint; - - pci_int = SH5PCI_READ(INT); - pci_cir = SH5PCI_READ(CIR); - pci_air = SH5PCI_READ(AIR); - - if (pci_int) { - printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); - printk("PCI INT -> 0x%x\n", pci_int & 0xffff); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(INT, ~0); - } - - pci_aint = SH5PCI_READ(AINT); - if (pci_aint) { - printk("PCI ARB INTERRUPT!\n"); - printk("PCI AINT -> 0x%x\n", pci_aint); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(AINT, ~0); - } - - return IRQ_HANDLED; -} - -static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) -{ - printk("SERR IRQ\n"); - - return IRQ_NONE; -} - -static void __init -pcibios_size_bridge(struct pci_bus *bus, struct resource *ior, - struct resource *memr) -{ - struct resource io_res, mem_res; - struct pci_dev *dev; - struct pci_dev *bridge = bus->self; - struct list_head *ln; - - if (!bridge) - return; /* host bridge, nothing to do */ - - /* set reasonable default locations for pcibios_align_resource */ - io_res.start = PCIBIOS_MIN_IO; - mem_res.start = PCIBIOS_MIN_MEM; - - io_res.end = io_res.start; - mem_res.end = mem_res.start; - - /* Collect information about how our direct children are layed out. */ - for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) { - int i; - dev = pci_dev_b(ln); - - /* Skip bridges for now */ - if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI) - continue; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource res; - unsigned long size; - - memcpy(&res, &dev->resource[i], sizeof(res)); - size = res.end - res.start + 1; - - if (res.flags & IORESOURCE_IO) { - res.start = io_res.end; - pcibios_align_resource(dev, &res, size, 0); - io_res.end = res.start + size; - } else if (res.flags & IORESOURCE_MEM) { - res.start = mem_res.end; - pcibios_align_resource(dev, &res, size, 0); - mem_res.end = res.start + size; - } - } - } - - /* And for all of the subordinate busses. */ - for (ln=bus->children.next; ln != &bus->children; ln=ln->next) - pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res); - - /* turn the ending locations into sizes (subtract start) */ - io_res.end -= io_res.start; - mem_res.end -= mem_res.start; - - /* Align the sizes up by bridge rules */ - io_res.end = ALIGN(io_res.end, 4*1024) - 1; - mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1; - - /* Adjust the bridge's allocation requirements */ - bridge->resource[0].end = bridge->resource[0].start + io_res.end; - bridge->resource[1].end = bridge->resource[1].start + mem_res.end; - - bridge->resource[PCI_BRIDGE_RESOURCES].end = - bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end; - bridge->resource[PCI_BRIDGE_RESOURCES+1].end = - bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end; - - /* adjust parent's resource requirements */ - if (ior) { - ior->end = ALIGN(ior->end, 4*1024); - ior->end += io_res.end; - } - - if (memr) { - memr->end = ALIGN(memr->end, 1*1024*1024); - memr->end += mem_res.end; - } -} - -static void __init pcibios_size_bridges(void) -{ - struct resource io_res, mem_res; - - memset(&io_res, 0, sizeof(io_res)); - memset(&mem_res, 0, sizeof(mem_res)); - - pcibios_size_bridge(pci_root_bus, &io_res, &mem_res); -} - -static int __init pcibios_init(void) -{ - if (request_irq(IRQ_ERR, pcish5_err_irq, - IRQF_DISABLED, "PCI Error",NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); - return -EINVAL; - } - - if (request_irq(IRQ_SERR, pcish5_serr_irq, - IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); - return -EINVAL; - } - - /* The pci subsystem needs to know where memory is and how much - * of it there is. I've simply made these globals. A better mechanism - * is probably needed. - */ - sh5pci_init(__pa(memory_start), - __pa(memory_end) - __pa(memory_start)); - - pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL); - pcibios_size_bridges(); - pci_assign_unassigned_resources(); - pci_fixup_irqs(no_swizzle, map_cayman_irq); - return 0; } -subsys_initcall(pcibios_init); - void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; int i; -#if 1 - if(dev) { - for(i=0; i<3; i++) { + if (dev) { + for (i= 0; i < 3; i++) { bus->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; bus->resource[i]->name = bus->name; @@ -514,23 +216,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) /* For now, propagate host limits to the bus; * we'll adjust them later. */ - -#if 1 bus->resource[0]->end = 64*1024 - 1 ; bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; bus->resource[0]->start = PCIBIOS_MIN_IO; bus->resource[1]->start = PCIBIOS_MIN_MEM; -#else - bus->resource[0]->end = 0; - bus->resource[1]->end = 0; - bus->resource[0]->start =0; - bus->resource[1]->start = 0; -#endif + /* Turn off downstream PF memory address range by default */ bus->resource[2]->start = 1024*1024; bus->resource[2]->end = bus->resource[2]->start - 1; } -#endif - } - diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index c71159dd04b9..7cff3fc04d30 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -6,6 +6,8 @@ * * Definitions for the SH5 PCI hardware. */ +#ifndef __PCI_SH5_H +#define __PCI_SH5_H /* Product ID */ #define PCISH5_PID 0x350d @@ -73,13 +75,12 @@ #define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */ #define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */ - - /* Base address of registers */ #define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000) #define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000) /* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */ +extern unsigned long pcicr_virt; /* Register selection macro */ #define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x)) /* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ @@ -104,4 +105,9 @@ #define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18) #define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18) +extern struct pci_ops sh5_pci_ops; + +/* arch/sh/drivers/pci/pci-sh5.c */ +int sh5pci_init(unsigned long memStart, unsigned long memSize); +#endif /* __PCI_SH5_H */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index ccaba368ac9b..49b435c3a57a 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -71,7 +71,7 @@ subsys_initcall(pcibios_init); * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) { pci_read_bridge_bases(bus); } |