2839 files changed, 88060 insertions, 78361 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 72f2fa189cc5..a62965d057f6 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -222,6 +222,19 @@ config HAVE_PERF_EVENTS_NMI
 	  subsystem.  Also has support for calculating CPU cycle events
 	  to determine how many clock cycles in a given period.
 
+config HAVE_PERF_REGS
+	bool
+	help
+	  Support selective register dumps for perf events. This includes
+	  bit-mapping of each registers and a unique architecture id.
+
+config HAVE_PERF_USER_STACK_DUMP
+	bool
+	help
+	  Support user stack dumps for perf event samples. This needs
+	  access to the user stack pointer which is not unified across
+	  architectures.
+
 config HAVE_ARCH_JUMP_LABEL
 	bool
 
@@ -281,4 +294,23 @@ config SECCOMP_FILTER
 
 	  See Documentation/prctl/seccomp_filter.txt for details.
 
+config HAVE_RCU_USER_QS
+	bool
+	help
+	  Provide kernel entry/exit hooks necessary for userspace
+	  RCU extended quiescent state. Syscalls need to be wrapped inside
+	  rcu_user_exit()-rcu_user_enter() through the slow path using
+	  TIF_NOHZ flag. Exceptions handlers must be wrapped as well. Irqs
+	  are already protected inside rcu_irq_enter/rcu_irq_exit() but
+	  preemption or signal handling on irq exit still need to be protected.
+
+config HAVE_VIRT_CPU_ACCOUNTING
+	bool
+
+config HAVE_IRQ_TIME_ACCOUNTING
+	bool
+	help
+	  Archs need to ensure they use a high enough resolution clock to
+	  support irq time accounting and then call enable_sched_clock_irqtime().
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index d5b9b5e645cc..9944dedee5b1 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -18,6 +18,8 @@ config ALPHA
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 3bb7ffeae3bc..c2cbe4fc391c 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -14,8 +14,8 @@
  */
 
 
-#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
-#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic64_read(v)	(*(volatile long *)&(v)->counter)
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
index db00f7885faa..e477bcd5b94a 100644
--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -1,7 +1,9 @@
 #ifndef __ASM_ALPHA_FPU_H
 #define __ASM_ALPHA_FPU_H
 
+#ifdef __KERNEL__
 #include <asm/special_insns.h>
+#endif
 
 /*
  * Alpha floating-point control register defines:
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index fd698a174f26..b87755a19554 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -76,7 +76,10 @@ struct switch_stack {
 #define task_pt_regs(task) \
   ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1)
 
-#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0)
+#define current_pt_regs() \
+  ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1)
+
+#define force_successful_syscall_return() (current_pt_regs()->r0 = 0)
 
 #endif
 
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index dcb221a4b5be..7d2f75be932e 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -76,9 +76,11 @@
 /* Instruct lower device to use last 4-bytes of skb data as FCS */
 #define SO_NOFCS		43
 
+#ifdef __KERNEL__
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
 #define SOCK_NONBLOCK	0x40000000
+#endif /* __KERNEL__ */
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index b49ec2f8d6e3..766fdfde2b7a 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -433,36 +433,12 @@ clear_user(void __user *to, long len)
 #undef __module_address
 #undef __module_call
 
-/* Returns: -EFAULT if exception before terminator, N if the entire
-   buffer filled, else strlen.  */
+#define user_addr_max() \
+        (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
 
-extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len);
-
-extern inline long
-strncpy_from_user(char *to, const char __user *from, long n)
-{
-	long ret = -EFAULT;
-	if (__access_ok((unsigned long)from, 0, get_fs()))
-		ret = __strncpy_from_user(to, from, n);
-	return ret;
-}
-
-/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-extern long __strlen_user(const char __user *);
-
-extern inline long strlen_user(const char __user *str)
-{
-	return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0;
-}
-
-/* Returns: 0 if exception before NUL or reaching the supplied limit (N),
- * a value greater than N if the limit would be exceeded, else strlen.  */
-extern long __strnlen_user(const char __user *, long);
-
-extern inline long strnlen_user(const char __user *str, long n)
-{
-	return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0;
-}
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
 
 /*
  * About the exception table:
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 633b23b0664a..a31a78eac9b9 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -465,10 +465,12 @@
 #define __NR_setns			501
 #define __NR_accept4			502
 #define __NR_sendmmsg			503
+#define __NR_process_vm_readv		504
+#define __NR_process_vm_writev		505
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			504
+#define NR_SYSCALLS			506
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_STAT64
diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h
new file mode 100644
index 000000000000..6b340d0f1521
--- /dev/null
+++ b/arch/alpha/include/asm/word-at-a-time.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_WORD_AT_A_TIME_H
+#define _ASM_WORD_AT_A_TIME_H
+
+#include <asm/compiler.h>
+
+/*
+ * word-at-a-time interface for Alpha.
+ */
+
+/*
+ * We do not use the word_at_a_time struct on Alpha, but it needs to be
+ * implemented to humour the generic code.
+ */
+struct word_at_a_time {
+	const unsigned long unused;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { 0 }
+
+/* Return nonzero if val has a zero */
+static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long zero_locations = __kernel_cmpbge(0, val);
+	*bits = zero_locations;
+	return zero_locations;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+#define create_zero_mask(bits) (bits)
+
+static inline unsigned long find_zero(unsigned long bits)
+{
+#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
+	/* Simple if have CIX instructions */
+	return __kernel_cttz(bits);
+#else
+	unsigned long t1, t2, t3;
+	/* Retain lowest set bit only */
+	bits &= -bits;
+	/* Binary search for lowest set bit */
+	t1 = bits & 0xf0;
+	t2 = bits & 0xcc;
+	t3 = bits & 0xaa;
+	if (t1) t1 = 4;
+	if (t2) t2 = 2;
+	if (t3) t3 = 1;
+	return t1 + t2 + t3;
+#endif
+}
+
+#endif /* _ASM_WORD_AT_A_TIME_H */
diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/alpha/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index d96e742d4dc2..15fa821d09cd 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s);
 
 /* entry.S */
 EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(kernel_execve);
 
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_tcpudp_magic);
@@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul);
  */
 EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(__do_clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
 
 /* 
  * SMP-specific symbols.
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index 6d159cee5f2f..ec0da0567ab5 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -663,58 +663,6 @@ kernel_thread:
 	br	ret_to_kernel
 .end kernel_thread
 
-/*
- * kernel_execve(path, argv, envp)
- */
-	.align	4
-	.globl	kernel_execve
-	.ent	kernel_execve
-kernel_execve:
-	/* We can be called from a module.  */
-	ldgp	$gp, 0($27)
-	lda	$sp, -(32+SIZEOF_PT_REGS+8)($sp)
-	.frame	$sp, 32+SIZEOF_PT_REGS+8, $26, 0
-	stq	$26, 0($sp)
-	stq	$16, 8($sp)
-	stq	$17, 16($sp)
-	stq	$18, 24($sp)
-	.prologue 1
-
-	lda	$16, 32($sp)
-	lda	$17, 0
-	lda	$18, SIZEOF_PT_REGS
-	bsr	$26, memset		!samegp
-
-	/* Avoid the HAE being gratuitously wrong, which would cause us
-	   to do the whole turn off interrupts thing and restore it.  */
-	ldq	$2, alpha_mv+HAE_CACHE
-	stq	$2, 152+32($sp)
-
-	ldq	$16, 8($sp)
-	ldq	$17, 16($sp)
-	ldq	$18, 24($sp)
-	lda	$19, 32($sp)
-	bsr	$26, do_execve		!samegp
-
-	ldq	$26, 0($sp)
-	bne	$0, 1f			/* error! */
-
-	/* Move the temporary pt_regs struct from its current location
-	   to the top of the kernel stack frame.  See copy_thread for
-	   details for a normal process.  */
-	lda	$16, 0x4000 - SIZEOF_PT_REGS($8)
-	lda	$17, 32($sp)
-	lda	$18, SIZEOF_PT_REGS
-	bsr	$26, memmove		!samegp
-
-	/* Take that over as our new stack frame and visit userland!  */
-	lda	$sp, 0x4000 - SIZEOF_PT_REGS($8)
-	br	$31, ret_from_sys_call
-
-1:	lda	$sp, 32+SIZEOF_PT_REGS+8($sp)
-	ret
-.end kernel_execve
-
 
 /*
  * Special system calls.  Most of these are special in that they either
@@ -797,115 +745,6 @@ sys_rt_sigreturn:
 .end sys_rt_sigreturn
 
 	.align	4
-	.globl	sys_sethae
-	.ent	sys_sethae
-sys_sethae:
-	.prologue 0
-	stq	$16, 152($sp)
-	ret
-.end sys_sethae
-
-	.align	4
-	.globl	osf_getpriority
-	.ent	osf_getpriority
-osf_getpriority:
-	lda	$sp, -16($sp)
-	stq	$26, 0($sp)
-	.prologue 0
-
-	jsr	$26, sys_getpriority
-
-	ldq	$26, 0($sp)
-	blt	$0, 1f
-
-	/* Return value is the unbiased priority, i.e. 20 - prio.
-	   This does result in negative return values, so signal
-	   no error by writing into the R0 slot.  */
-	lda	$1, 20
-	stq	$31, 16($sp)
-	subl	$1, $0, $0
-	unop
-
-1:	lda	$sp, 16($sp)
-	ret
-.end osf_getpriority
-
-	.align	4
-	.globl	sys_getxuid
-	.ent	sys_getxuid
-sys_getxuid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-	ldq	$3, TASK_CRED($2)
-	ldl	$0, CRED_UID($3)
-	ldl	$1, CRED_EUID($3)
-	stq	$1, 80($sp)
-	ret
-.end sys_getxuid
-
-	.align	4
-	.globl	sys_getxgid
-	.ent	sys_getxgid
-sys_getxgid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-	ldq	$3, TASK_CRED($2)
-	ldl	$0, CRED_GID($3)
-	ldl	$1, CRED_EGID($3)
-	stq	$1, 80($sp)
-	ret
-.end sys_getxgid
-
-	.align	4
-	.globl	sys_getxpid
-	.ent	sys_getxpid
-sys_getxpid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-
-	/* See linux/kernel/timer.c sys_getppid for discussion
-	   about this loop.  */
-	ldq	$3, TASK_GROUP_LEADER($2)
-	ldq	$4, TASK_REAL_PARENT($3)
-	ldl	$0, TASK_TGID($2)
-1:	ldl	$1, TASK_TGID($4)
-#ifdef CONFIG_SMP
-	mov	$4, $5
-	mb
-	ldq	$3, TASK_GROUP_LEADER($2)
-	ldq	$4, TASK_REAL_PARENT($3)
-	cmpeq	$4, $5, $5
-	beq	$5, 1b
-#endif
-	stq	$1, 80($sp)
-	ret
-.end sys_getxpid
-
-	.align	4
-	.globl	sys_alpha_pipe
-	.ent	sys_alpha_pipe
-sys_alpha_pipe:
-	lda	$sp, -16($sp)
-	stq	$26, 0($sp)
-	.prologue 0
-
-	mov	$31, $17
-	lda	$16, 8($sp)
-	jsr	$26, do_pipe_flags
-
-	ldq	$26, 0($sp)
-	bne	$0, 1f
-
-	/* The return values are in $0 and $20.  */
-	ldl	$1, 12($sp)
-	ldl	$0, 8($sp)
-
-	stq	$1, 80+16($sp)
-1:	lda	$sp, 16($sp)
-	ret
-.end sys_alpha_pipe
-
-	.align	4
 	.globl	sys_execve
 	.ent	sys_execve
 sys_execve:
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 98a103621af6..63e77e3944ce 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -145,27 +145,24 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		long __user *, basep)
 {
 	int error;
-	struct file *file;
+	struct fd arg = fdget(fd);
 	struct osf_dirent_callback buf;
 
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
+	if (!arg.file)
+		return -EBADF;
 
 	buf.dirent = dirent;
 	buf.basep = basep;
 	buf.count = count;
 	buf.error = 0;
 
-	error = vfs_readdir(file, osf_filldir, &buf);
+	error = vfs_readdir(arg.file, osf_filldir, &buf);
 	if (error >= 0)
 		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
-	fput(file);
- out:
+	fdput(arg);
 	return error;
 }
 
@@ -278,8 +275,8 @@ linux_to_osf_stat(struct kstat *lstat, struct osf_stat __user *osf_stat)
 	tmp.st_dev	= lstat->dev;
 	tmp.st_mode	= lstat->mode;
 	tmp.st_nlink	= lstat->nlink;
-	tmp.st_uid	= lstat->uid;
-	tmp.st_gid	= lstat->gid;
+	tmp.st_uid	= from_kuid_munged(current_user_ns(), lstat->uid);
+	tmp.st_gid	= from_kgid_munged(current_user_ns(), lstat->gid);
 	tmp.st_rdev	= lstat->rdev;
 	tmp.st_ldev	= lstat->rdev;
 	tmp.st_size	= lstat->size;
@@ -1404,3 +1401,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
 }
 
 #endif
+
+SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
+{
+	int prio = sys_getpriority(which, who);
+	if (prio >= 0) {
+		/* Return value is the unbiased priority, i.e. 20 - prio.
+		   This does result in negative return values, so signal
+		   no error */
+		force_successful_syscall_return();
+		prio = 20 - prio;
+	}
+	return prio;
+}
+
+SYSCALL_DEFINE0(getxuid)
+{
+	current_pt_regs()->r20 = sys_geteuid();
+	return sys_getuid();
+}
+
+SYSCALL_DEFINE0(getxgid)
+{
+	current_pt_regs()->r20 = sys_getegid();
+	return sys_getgid();
+}
+
+SYSCALL_DEFINE0(getxpid)
+{
+	current_pt_regs()->r20 = sys_getppid();
+	return sys_getpid();
+}
+
+SYSCALL_DEFINE0(alpha_pipe)
+{
+	int fd[2];
+	int res = do_pipe_flags(fd, 0);
+	if (!res) {
+		/* The return values are in $0 and $20.  */
+		current_pt_regs()->r20 = fd[1];
+		res = fd[0];
+	}
+	return res;
+}
+
+SYSCALL_DEFINE1(sethae, unsigned long, val)
+{
+	current_pt_regs()->hae = val;
+	return 0;
+}
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 9816d5a4d176..ef757147cbf9 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -256,12 +256,6 @@ pcibios_fixup_bus(struct pci_bus *bus)
 	}
 }
 
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 int
 pcibios_enable_device(struct pci_dev *dev, int mask)
 {
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 153d3fce3e8e..83638aa096d5 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 
 #include <asm/reg.h>
 #include <asm/uaccess.h>
@@ -54,9 +55,12 @@ cpu_idle(void)
 		/* FIXME -- EV6 and LCA45 know how to power down
 		   the CPU.  */
 
+		rcu_idle_enter();
 		while (!need_resched())
 			cpu_relax();
-		schedule();
+
+		rcu_idle_exit();
+		schedule_preempt_disabled();
 	}
 }
 
@@ -455,3 +459,22 @@ get_wchan(struct task_struct *p)
 	}
 	return pc;
 }
+
+int kernel_execve(const char *path, const char *const argv[], const char *const envp[])
+{
+	/* Avoid the HAE being gratuitously wrong, which would cause us
+	   to do the whole turn off interrupts thing and restore it.  */
+	struct pt_regs regs = {.hae = alpha_mv.hae_cache};
+	int err = do_execve(path, argv, envp, &regs);
+	if (!err) {
+		struct pt_regs *p = current_pt_regs();
+		/* copy regs to normal position and off to userland we go... */
+		*p = regs;
+		__asm__ __volatile__ (
+			"mov	%0, $sp;"
+			"br	$31, ret_from_sys_call"
+			: : "r"(p));
+	}
+	return err;
+}
+EXPORT_SYMBOL(kernel_execve);
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 35ddc02bfa4a..a41ad90a97a6 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -166,6 +166,7 @@ smp_callin(void)
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
+	preempt_disable();
 	/* Do nothing.  */
 	cpu_idle();
 }
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 3ea809430eda..5d5865204a1d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -223,6 +223,7 @@ srmcons_init(void)
 		driver->subtype = SYSTEM_TYPE_SYSCONS;
 		driver->init_termios = tty_std_termios;
 		tty_set_operations(driver, &srmcons_ops);
+		tty_port_link_device(&srmcons_singleton.port, driver, 0);
 		err = tty_register_driver(driver);
 		if (err) {
 			put_tty_driver(driver);
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 87835235f114..2ac6b45c3e00 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -111,7 +111,7 @@ sys_call_table:
 	.quad sys_socket
 	.quad sys_connect
 	.quad sys_accept
-	.quad osf_getpriority			/* 100 */
+	.quad sys_osf_getpriority			/* 100 */
 	.quad sys_send
 	.quad sys_recv
 	.quad sys_sigreturn
@@ -522,6 +522,8 @@ sys_call_table:
 	.quad sys_setns
 	.quad sys_accept4
 	.quad sys_sendmmsg
+	.quad sys_process_vm_readv
+	.quad sys_process_vm_writev		/* 505 */
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index c0a83ab62b78..59660743237c 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -31,8 +31,6 @@ lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
 	$(ev6-y)memchr.o \
 	$(ev6-y)copy_user.o \
 	$(ev6-y)clear_user.o \
-	$(ev6-y)strncpy_from_user.o \
-	$(ev67-y)strlen_user.o \
 	$(ev6-y)csum_ipv6_magic.o \
 	$(ev6-y)clear_page.o \
 	$(ev6-y)copy_page.o \
diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S
deleted file mode 100644
index d2e28178cacc..000000000000
--- a/arch/alpha/lib/ev6-strncpy_from_user.S
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * arch/alpha/lib/ev6-strncpy_from_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Just like strncpy except in the return value:
- *
- * -EFAULT       if an exception occurs before the terminator is copied.
- * N             if the buffer filled.
- *
- * Otherwise the length of the string is returned.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * A bunch of instructions got moved and temp registers were changed
- * to aid in scheduling.  Control flow was also re-arranged to eliminate
- * branches, and to provide longer code sequences to enable better scheduling.
- * A total rewrite (using byte load/stores for start & tail sequences)
- * is desirable, but very difficult to do without a from-scratch rewrite.
- * Save that for the future.
- */
-
-
-#include <asm/errno.h>
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($0); 	\
-	.previous
-
-
-	.set noat
-	.set noreorder
-	.text
-
-	.globl __strncpy_from_user
-	.ent __strncpy_from_user
-	.frame $30, 0, $26
-	.prologue 0
-
-	.align 4
-__strncpy_from_user:
-	and	a0, 7, t3	# E : find dest misalignment
-	beq	a2, $zerolength	# U :
-
-	/* Are source and destination co-aligned?  */
-	mov	a0, v0		# E : save the string start
-	xor	a0, a1, t4	# E :
-	EX( ldq_u t1, 0(a1) )	# L : Latency=3 load first quadword
-	ldq_u	t0, 0(a0)	# L : load first (partial) aligned dest quadword
-
-	addq	a2, t3, a2	# E : bias count by dest misalignment
-	subq	a2, 1, a3	# E :
-	addq	zero, 1, t10	# E :
-	and	t4, 7, t4	# E : misalignment between the two
-
-	and	a3, 7, t6	# E : number of tail bytes
-	sll	t10, t6, t10	# E : t10 = bitmask of last count byte
-	bne	t4, $unaligned	# U :
-	lda	t2, -1		# E : build a mask against false zero
-
-	/*
-	 * We are co-aligned; take care of a partial first word.
-	 * On entry to this basic block:
-	 * t0 == the first destination word for masking back in
-	 * t1 == the first source word.
-	 */
-
-	srl	a3, 3, a2	# E : a2 = loop counter = (count - 1)/8
-	addq	a1, 8, a1	# E :
-	mskqh	t2, a1, t2	# U :   detection in the src word
-	nop
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	mskqh	t1, a1, t3	# U :
-	mskql	t0, a1, t0	# U : assemble the first output word
-	ornot	t1, t2, t2	# E :
-	nop
-
-	cmpbge	zero, t2, t8	# E : bits set iff null found
-	or	t0, t3, t0	# E :
-	beq	a2, $a_eoc	# U :
-	bne	t8, $a_eos	# U : 2nd branch in a quad.  Bad.
-
-	/* On entry to this basic block:
-	 * t0 == a source quad not containing a null.
-	 * a0 - current aligned destination address
-	 * a1 - current aligned source address
-	 * a2 - count of quadwords to move.
-	 * NOTE: Loop improvement - unrolling this is going to be
-	 *	a huge win, since we're going to stall otherwise.
-	 *	Fix this later.  For _really_ large copies, look
-	 *	at using wh64 on a look-ahead basis.  See the code
-	 *	in clear_user.S and copy_user.S.
-	 * Presumably, since (a0) and (a1) do not overlap (by C definition)
-	 * Lots of nops here:
-	 *	- Separate loads from stores
-	 *	- Keep it to 1 branch/quadpack so the branch predictor
-	 *	  can train.
-	 */
-$a_loop:
-	stq_u	t0, 0(a0)	# L :
-	addq	a0, 8, a0	# E :
-	nop
-	subq	a2, 1, a2	# E :
-
-	EX( ldq_u t0, 0(a1) )	# L :
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t0, t8	# E : Stall 2 cycles on t0
-	beq	a2, $a_eoc      # U :
-
-	beq	t8, $a_loop	# U :
-	nop
-	nop
-	nop
-
-	/* Take care of the final (partial) word store.  At this point
-	 * the end-of-count bit is set in t8 iff it applies.
-	 *
-	 * On entry to this basic block we have:
-	 * t0 == the source word containing the null
-	 * t8 == the cmpbge mask that found it.
-	 */
-$a_eos:
-	negq	t8, t12		# E : find low bit set
-	and	t8, t12, t12	# E : 
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-
-	or	t12, t6, t8	# E :
-	zapnot	t0, t8, t0	# U : clear src bytes > null
-	zap	t1, t8, t1	# U : clear dst bytes <= null
-	or	t0, t1, t0	# E :
-
-	stq_u	t0, 0(a0)	# L :
-	br	$finish_up	# L0 :
-	nop
-	nop
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-	.align 4
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-	nop
-	nop
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 4
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	EX( ldq_u t2, 8(a1) )	# L : load second src word
-	addq	a1, 8, a1	# E :
-	mskql	t0, a0, t0	# U : mask trailing garbage in dst
-	extqh	t2, a1, t4	# U :
-
-	or	t1, t4, t1	# E : first aligned src word complete
-	mskqh	t1, a0, t1	# U : mask leading garbage in src
-	or	t0, t1, t0	# E : first output word complete
-	or	t0, t6, t6	# E : mask original data for zero test
-
-	cmpbge	zero, t6, t8	# E :
-	beq	a2, $u_eocfin	# U :
-	bne	t8, $u_final	# U : bad news - 2nd branch in a quad
-	lda	t6, -1		# E : mask out the bits we have
-
-	mskql	t6, a1, t6	# U :   already seen
-	stq_u	t0, 0(a0)	# L : store first output word
-	or      t6, t2, t2	# E :
-	cmpbge	zero, t2, t8	# E : find nulls in second partial
-
-	addq	a0, 8, a0		# E :
-	subq	a2, 1, a2		# E :
-	bne	t8, $u_late_head_exit	# U :
-	nop
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# U : position hi-bits of lo word
-	EX( ldq_u t2, 8(a1) )	# L : read next high-order source word
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t2, t8	# E :
-
-	beq	a2, $u_eoc	# U :
-	bne	t8, $u_eos	# U :
-	nop
-	nop
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	/*
-	 * Extra nops here:
-	 *	separate load quads from store quads
-	 *	only one branch/quad to permit predictor training
-	 */
-
-	.align 4
-$u_loop:
-	extqh	t2, a1, t0	# U : extract high bits for current word
-	addq	a1, 8, a1	# E :
-	extql	t2, a1, t3	# U : extract low bits for next time
-	addq	a0, 8, a0	# E :
-
-	or	t0, t1, t0	# E : current dst word now complete
-	EX( ldq_u t2, 0(a1) )	# L : load high word for next time
-	subq	a2, 1, a2	# E :
-	nop
-
-	stq_u	t0, -8(a0)	# L : save the current word
-	mov	t3, t1		# E :
-	cmpbge	zero, t2, t8	# E : test new word for eos
-	beq	a2, $u_eoc	# U :
-
-	beq	t8, $u_loop	# U :
-	nop
-	nop
-	nop
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-	.align 4
-$u_eos:
-	extqh	t2, a1, t0	# U :
-	or	t0, t1, t0	# E : first (partial) source word complete
-	cmpbge	zero, t0, t8	# E : is the null in this first bit?
-	nop
-
-	bne	t8, $u_final	# U :
-	stq_u	t0, 0(a0)	# L : the null was in the high-order bits
-	addq	a0, 8, a0	# E :
-	subq	a2, 1, a2	# E :
-
-	.align 4
-$u_late_head_exit:
-	extql	t2, a1, t0	# U :
-	cmpbge	zero, t0, t8	# E :
-	or	t8, t10, t6	# E :
-	cmoveq	a2, t6, t8	# E :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-	.align 4
-$u_final:
-	negq	t8, t6		# E : isolate low bit set
-	and	t6, t8, t12	# E :
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-
-	or	t6, t12, t8	# E :
-	zapnot	t0, t8, t0	# U : kill source bytes > null
-	zap	t1, t8, t1	# U : kill dest bytes <= null
-	or	t0, t1, t0	# E :
-
-	stq_u	t0, 0(a0)	# E :
-	br	$finish_up	# U :
-	nop
-	nop
-
-	.align 4
-$u_eoc:				# end-of-count
-	extqh	t2, a1, t0	# U :
-	or	t0, t1, t0	# E :
-	cmpbge	zero, t0, t8	# E :
-	nop
-
-	.align 4
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8	# E :
-	br	$u_final	# U :
-	nop
-	nop
-
-	/* Unaligned copy entry point.  */
-	.align 4
-$unaligned:
-
-	srl	a3, 3, a2	# U : a2 = loop counter = (count - 1)/8
-	and	a0, 7, t4	# E : find dest misalignment
-	and	a1, 7, t5	# E : find src misalignment
-	mov	zero, t0	# E :
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t6	# E :
-	beq	t4, 1f		# U :
-	ldq_u	t0, 0(a0)	# L :
-	lda	t6, -1		# E :
-
-	mskql	t6, a0, t6	# E :
-	nop
-	nop
-	nop
-
-	.align 4
-1:
-	subq	a1, t4, a1	# E : sub dest misalignment from src addr
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-	cmplt	t4, t5, t12	# E :
-	extql	t1, a1, t1	# U : shift src into place
-	lda	t2, -1		# E : for creating masks later
-
-	beq	t12, $u_head	# U :
-	mskqh	t2, t5, t2	# U : begin src byte validity mask
-	cmpbge	zero, t1, t8	# E : is there a zero?
-	nop
-
-	extql	t2, a1, t2	# U :
-	or	t8, t10, t5	# E : test for end-of-count too
-	cmpbge	zero, t2, t3	# E :
-	cmoveq	a2, t5, t8	# E : Latency=2, extra map slot
-
-	nop			# E : goes with cmov
-	andnot	t8, t3, t8	# E :
-	beq	t8, $u_head	# U :
-	nop
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# L :
-	negq	t8, t6		# E : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# U :
-	and	t6, t8, t12	# E :
-
-	subq	t12, 1, t6	# E :
-	or	t6, t12, t8	# E :
-	zapnot	t2, t8, t2	# U : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# U : to source validity mask
-
-	andnot	t0, t2, t0	# E : zero place for source to reside
-	or	t0, t1, t0	# E : and put it there
-	stq_u	t0, 0(a0)	# L :
-	nop
-
-	.align 4
-$finish_up:
-	zapnot	t0, t12, t4	# U : was last byte written null?
-	and	t12, 0xf0, t3	# E : binary search for the address of the
-	cmovne	t4, 1, t4	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-
-	and	t12, 0xcc, t2	# E : last byte written
-	and	t12, 0xaa, t1	# E :
-	cmovne	t3, 4, t3	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-
-	bic	a0, 7, t0
-	cmovne	t2, 2, t2	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-	nop
-
-	cmovne	t1, 1, t1	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-	addq	t0, t3, t0	# E :
-	addq	t1, t2, t1	# E :
-
-	addq	t0, t1, t0	# E :
-	addq	t0, t4, t0	# add one if we filled the buffer
-	subq	t0, v0, v0	# find string length
-	ret			# L0 :
-
-	.align 4
-$zerolength:
-	nop
-	nop
-	nop
-	clr	v0
-
-$exception:
-	nop
-	nop
-	nop
-	ret
-
-	.end __strncpy_from_user
diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S
deleted file mode 100644
index 57e0d77b81a6..000000000000
--- a/arch/alpha/lib/ev67-strlen_user.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strlen_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com>
- *
- * Return the length of the string including the NULL terminator
- * (strlen+1) or zero if an error occurred.
- *
- * In places where it is critical to limit the processing time,
- * and the data is not trusted, strnlen_user() should be used.
- * It will return a value greater than its second argument if
- * that limit would be exceeded. This implementation is allowed
- * to access memory beyond the limit, but will not cross a page
- * boundary when doing so.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *      Compiler Writer's Guide for the Alpha 21264
- *      abbreviated as 'CWG' in other comments here
- *      ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *      E       - either cluster
- *      U       - upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *      L       - lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda v0, $exception-99b(zero);	\
-	.previous
-
-
-	.set noreorder
-	.set noat
-	.text
-
-	.globl __strlen_user
-	.ent __strlen_user
-	.frame sp, 0, ra
-
-	.align 4
-__strlen_user:
-	ldah	a1, 32767(zero)	# do not use plain strlen_user() for strings
-				# that might be almost 2 GB long; you should
-				# be using strnlen_user() instead
-	nop
-	nop
-	nop
-
-	.globl __strnlen_user
-
-	.align 4
-__strnlen_user:
-	.prologue 0
-	EX( ldq_u t0, 0(a0) )	# L : load first quadword (a0 may be misaligned)
-	lda     t1, -1(zero)	# E :
-
-	insqh   t1, a0, t1	# U :
-	andnot  a0, 7, v0	# E :
-	or      t1, t0, t0	# E :
-	subq	a0, 1, a0	# E : get our +1 for the return 
-
-	cmpbge  zero, t0, t1	# E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0
-	subq	a1, 7, t2	# E :
-	subq	a0, v0, t0	# E :
-	bne     t1, $found	# U :
-
-	addq	t2, t0, t2	# E :
-	addq	a1, 1, a1	# E :
-	nop			# E :
-	nop			# E :
-
-	.align 4
-$loop:	ble	t2, $limit	# U :
-	EX( ldq t0, 8(v0) )	# L :
-	nop			# E :
-	nop			# E :
-
-	cmpbge  zero, t0, t1	# E :
-	subq	t2, 8, t2	# E :
-	addq    v0, 8, v0	# E : addr += 8
-	beq     t1, $loop	# U :
-
-$found: cttz	t1, t2		# U0 :
-	addq	v0, t2, v0	# E :
-	subq    v0, a0, v0	# E :
-	ret			# L0 :
-
-$exception:
-	nop
-	nop
-	nop
-	ret
-
-	.align 4		# currently redundant
-$limit:
-	nop
-	nop
-	subq	a1, t2, v0
-	ret
-
-	.end __strlen_user
diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S
deleted file mode 100644
index 508a18e96479..000000000000
--- a/arch/alpha/lib/strlen_user.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/alpha/lib/strlen_user.S
- *
- * Return the length of the string including the NUL terminator
- * (strlen+1) or zero if an error occurred.
- *
- * In places where it is critical to limit the processing time,
- * and the data is not trusted, strnlen_user() should be used.
- * It will return a value greater than its second argument if
- * that limit would be exceeded. This implementation is allowed
- * to access memory beyond the limit, but will not cross a page
- * boundary when doing so.
- */
-
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda v0, $exception-99b(zero);	\
-	.previous
-
-
-	.set noreorder
-	.set noat
-	.text
-
-	.globl __strlen_user
-	.ent __strlen_user
-	.frame sp, 0, ra
-
-	.align 3
-__strlen_user:
-	ldah	a1, 32767(zero)	# do not use plain strlen_user() for strings
-				# that might be almost 2 GB long; you should
-				# be using strnlen_user() instead
-
-	.globl __strnlen_user
-
-	.align 3
-__strnlen_user:
-	.prologue 0
-
-	EX( ldq_u t0, 0(a0) )	# load first quadword (a0 may be misaligned)
-	lda     t1, -1(zero)
-	insqh   t1, a0, t1
-	andnot  a0, 7, v0
-	or      t1, t0, t0
-	subq	a0, 1, a0	# get our +1 for the return 
-	cmpbge  zero, t0, t1	# t1 <- bitmask: bit i == 1 <==> i-th byte == 0
-	subq	a1, 7, t2
-	subq	a0, v0, t0
-	bne     t1, $found
-
-	addq	t2, t0, t2
-	addq	a1, 1, a1
-
-	.align 3
-$loop:	ble	t2, $limit
-	EX( ldq t0, 8(v0) )
-	subq	t2, 8, t2
-	addq    v0, 8, v0	# addr += 8
-	cmpbge  zero, t0, t1
-	beq     t1, $loop
-
-$found:	negq    t1, t2		# clear all but least set bit
-	and     t1, t2, t1
-
-	and     t1, 0xf0, t2	# binary search for that set bit
-	and	t1, 0xcc, t3
-	and	t1, 0xaa, t4
-	cmovne	t2, 4, t2
-	cmovne	t3, 2, t3
-	cmovne	t4, 1, t4
-	addq	t2, t3, t2
-	addq	v0, t4, v0
-	addq	v0, t2, v0
-	nop			# dual issue next two on ev4 and ev5
-	subq    v0, a0, v0
-$exception:
-	ret
-
-	.align 3		# currently redundant
-$limit:
-	subq	a1, t2, v0
-	ret
-
-	.end __strlen_user
diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S
deleted file mode 100644
index 73ee21160ff7..000000000000
--- a/arch/alpha/lib/strncpy_from_user.S
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * arch/alpha/lib/strncpy_from_user.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Just like strncpy except in the return value:
- *
- * -EFAULT       if an exception occurs before the terminator is copied.
- * N             if the buffer filled.
- *
- * Otherwise the length of the string is returned.
- */
-
-
-#include <asm/errno.h>
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($0); 	\
-	.previous
-
-
-	.set noat
-	.set noreorder
-	.text
-
-	.globl __strncpy_from_user
-	.ent __strncpy_from_user
-	.frame $30, 0, $26
-	.prologue 0
-
-	.align 3
-$aligned:
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# e1    : build a mask against false zero
-	mskqh	t2, a1, t2	# e0    :   detection in the src word
-	mskqh	t1, a1, t3	# e0    :
-	ornot	t1, t2, t2	# .. e1 :
-	mskql	t0, a1, t0	# e0    : assemble the first output word
-	cmpbge	zero, t2, t8	# .. e1 : bits set iff null found
-	or	t0, t3, t0	# e0    :
-	beq	a2, $a_eoc	# .. e1 :
-	bne	t8, $a_eos	# .. e1 :
-
-	/* On entry to this basic block:
-	   t0 == a source word not containing a null.  */
-
-$a_loop:
-	stq_u	t0, 0(a0)	# e0    :
-	addq	a0, 8, a0	# .. e1 :
-	EX( ldq_u t0, 0(a1) )	# e0    :
-	addq	a1, 8, a1	# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t0, t8	# .. e1 (stall)
-	beq	a2, $a_eoc      # e1    :
-	beq	t8, $a_loop	# e1    :
-
-	/* Take care of the final (partial) word store.  At this point
-	   the end-of-count bit is set in t8 iff it applies.
-
-	   On entry to this basic block we have:
-	   t0 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-
-$a_eos:
-	negq	t8, t12		# e0    : find low bit set
-	and	t8, t12, t12	# e1 (stall)
-
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# e0    :
-	bne	t6, 1f		# .. e1 (zdb)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t12, t6, t8	# e0    :
-	unop			#
-	zapnot	t0, t8, t0	# e0    : clear src bytes > null
-	zap	t1, t8, t1	# .. e1 : clear dst bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)
-	br	$finish_up
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-
-	/*** The Function Entry Point ***/
-	.align 3
-__strncpy_from_user:
-	mov	a0, v0		# save the string start
-	beq	a2, $zerolength
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t1	# e0    :
-	and	a0, 7, t0	# .. e1 : find dest misalignment
-	and	t1, 7, t1	# e0    :
-	addq	a2, t0, a2	# .. e1 : bias count by dest misalignment
-	subq	a2, 1, a2	# e0    :
-	and	a2, 7, t2	# e1    :
-	srl	a2, 3, a2	# e0    : a2 = loop counter = (count - 1)/8
-	addq	zero, 1, t10	# .. e1 :
-	sll	t10, t2, t10	# e0    : t10 = bitmask of last count byte
-	bne	t1, $unaligned	# .. e1 :
-
-	/* We are co-aligned; take care of a partial first word.  */
-
-	EX( ldq_u t1, 0(a1) )	# e0    : load first src word
-	addq	a1, 8, a1	# .. e1 :
-
-	beq	t0, $aligned	# avoid loading dest word if not needed
-	ldq_u	t0, 0(a0)	# e0    :
-	br	$aligned	# .. e1 :
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 3
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	EX( ldq_u t2, 8(a1) )	# e0    : load second src word
-	addq	a1, 8, a1	# .. e1 :
-	mskql	t0, a0, t0	# e0    : mask trailing garbage in dst
-	extqh	t2, a1, t4	# e0    :
-	or	t1, t4, t1	# e1    : first aligned src word complete
-	mskqh	t1, a0, t1	# e0    : mask leading garbage in src
-	or	t0, t1, t0	# e0    : first output word complete
-	or	t0, t6, t6	# e1    : mask original data for zero test
-	cmpbge	zero, t6, t8	# e0    :
-	beq	a2, $u_eocfin	# .. e1 :
-	bne	t8, $u_final	# e1    :
-
-	lda	t6, -1			# e1    : mask out the bits we have
-	mskql	t6, a1, t6		# e0    :   already seen
-	stq_u	t0, 0(a0)		# e0    : store first output word
-	or      t6, t2, t2		# .. e1 :
-	cmpbge	zero, t2, t8		# e0    : find nulls in second partial
-	addq	a0, 8, a0		# .. e1 :
-	subq	a2, 1, a2		# e0    :
-	bne	t8, $u_late_head_exit	# .. e1 :
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# e0    : position hi-bits of lo word
-	EX( ldq_u t2, 8(a1) )	# .. e1 : read next high-order source word
-	addq	a1, 8, a1	# e0    :
-	cmpbge	zero, t2, t8	# e1 (stall)
-	beq	a2, $u_eoc	# e1    :
-	bne	t8, $u_eos	# e1    :
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 3
-$u_loop:
-	extqh	t2, a1, t0	# e0    : extract high bits for current word
-	addq	a1, 8, a1	# .. e1 :
-	extql	t2, a1, t3	# e0    : extract low bits for next time
-	addq	a0, 8, a0	# .. e1 :
-	or	t0, t1, t0	# e0    : current dst word now complete
-	EX( ldq_u t2, 0(a1) )	# .. e1 : load high word for next time
-	stq_u	t0, -8(a0)	# e0    : save the current word
-	mov	t3, t1		# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t2, t8	# .. e1 : test new word for eos
-	beq	a2, $u_eoc	# e1    :
-	beq	t8, $u_loop	# e1    :
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	extqh	t2, a1, t0	# e0    :
-	or	t0, t1, t0	# e1    : first (partial) source word complete
-
-	cmpbge	zero, t0, t8	# e0    : is the null in this first bit?
-	bne	t8, $u_final	# .. e1 (zdb)
-
-	stq_u	t0, 0(a0)	# e0    : the null was in the high-order bits
-	addq	a0, 8, a0	# .. e1 :
-	subq	a2, 1, a2	# e1    :
-
-$u_late_head_exit:
-	extql	t2, a1, t0	# .. e0 :
-	cmpbge	zero, t0, t8	# e0    :
-	or	t8, t10, t6	# e1    :
-	cmoveq	a2, t6, t8	# e0    :
-	nop			# .. e1 :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# e0    : isolate low bit set
-	and	t6, t8, t12	# e1    :
-
-	and	t12, 0x80, t6	# e0    : avoid dest word load if we can
-	bne	t6, 1f		# .. e1 (zdb)
-
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t6, t12, t8	# e0    :
-	zapnot	t0, t8, t0	# .. e1 : kill source bytes > null
-	zap	t1, t8, t1	# e0    : kill dest bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)	# e0    :
-	br	$finish_up
-
-$u_eoc:				# end-of-count
-	extqh	t2, a1, t0
-	or	t0, t1, t0
-	cmpbge	zero, t0, t8
-
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8
-	br	$u_final
-
-	/* Unaligned copy entry point.  */
-	.align 3
-$unaligned:
-
-	EX( ldq_u t1, 0(a1) )	# e0    : load first source word
-
-	and	a0, 7, t4	# .. e1 : find dest misalignment
-	and	a1, 7, t5	# e0    : find src misalignment
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t0	# .. e1 :
-	mov	zero, t6	# e0    :
-	beq	t4, 1f		# .. e1 :
-	ldq_u	t0, 0(a0)	# e0    :
-	lda	t6, -1		# .. e1 :
-	mskql	t6, a0, t6	# e0    :
-1:
-	subq	a1, t4, a1	# .. e1 : sub dest misalignment from src addr
-
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-
-	cmplt	t4, t5, t12	# e1    :
-	extql	t1, a1, t1	# .. e0 : shift src into place
-	lda	t2, -1		# e0    : for creating masks later
-	beq	t12, $u_head	# e1    :
-
-	mskqh	t2, t5, t2	# e0    : begin src byte validity mask
-	cmpbge	zero, t1, t8	# .. e1 : is there a zero?
-	extql	t2, a1, t2	# e0    :
-	or	t8, t10, t5	# .. e1 : test for end-of-count too
-	cmpbge	zero, t2, t3	# e0    :
-	cmoveq	a2, t5, t8	# .. e1 :
-	andnot	t8, t3, t8	# e0    :
-	beq	t8, $u_head	# .. e1 (zdb)
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# e0    :
-	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# e0    :
-	and	t6, t8, t12	# .. e1 :
-	subq	t12, 1, t6	# e0    :
-	or	t6, t12, t8	# e1    :
-
-	zapnot	t2, t8, t2	# e0    : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# .. e1 : to source validity mask
-
-	andnot	t0, t2, t0	# e0    : zero place for source to reside
-	or	t0, t1, t0	# e1    : and put it there
-	stq_u	t0, 0(a0)	# e0    :
-
-$finish_up:
-	zapnot	t0, t12, t4	# was last byte written null?
-	cmovne	t4, 1, t4
-
-	and	t12, 0xf0, t3	# binary search for the address of the
-	and	t12, 0xcc, t2	# last byte written
-	and	t12, 0xaa, t1
-	bic	a0, 7, t0
-	cmovne	t3, 4, t3
-	cmovne	t2, 2, t2
-	cmovne	t1, 1, t1
-	addq	t0, t3, t0
-	addq	t1, t2, t1
-	addq	t0, t1, t0
-	addq	t0, t4, t0	# add one if we filled the buffer
-
-	subq	t0, v0, v0	# find string length
-	ret
-
-$zerolength:
-	clr	v0
-$exception:
-	ret
-
-	.end __strncpy_from_user
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 5eecab1a84ef..0c4132dd3507 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	const struct exception_table_entry *fixup;
 	int fault, si_code = SEGV_MAPERR;
 	siginfo_t info;
+	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+			      (cause > 0 ? FAULT_FLAG_WRITE : 0));
 
 	/* As of EV6, a load into $31/$f31 is a prefetch, and never faults
 	   (or is suppressed by the PALcode).  Support that for older CPUs
@@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		goto vmalloc_fault;
 #endif
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	/* If for any reason at all we couldn't handle the fault,
 	   make sure we exit gracefully rather than endlessly redo
 	   the fault.  */
-	fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0);
-	up_read(&mm->mmap_sem);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR)
+			current->maj_flt++;
+		else
+			current->min_flt++;
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			 /* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
+
 	return;
 
 	/* Something tried to access memory that isn't in our memory map.
@@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
  out_of_memory:
+	up_read(&mm->mmap_sem);
 	if (!user_mode(regs))
 		goto no_context;
 	pagefault_out_of_memory();
 	return;
 
  do_sigbus:
+	up_read(&mm->mmap_sem);
 	/* Send a sigbus, regardless of whether we were in kernel
 	   or user mode.  */
 	info.si_signo = SIGBUS;
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index a0a5d27aa215..b8ce18f485d3 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -12,6 +12,7 @@
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <asm/ptrace.h>
+#include <asm/special_insns.h>
 
 #include "op_impl.h"
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e91c7cdc6fe5..6d2f7f5c0036 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
@@ -16,6 +16,7 @@ config ARM
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
@@ -38,7 +39,6 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
-	select GENERIC_IRQ_PROBE
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HARDIRQS_SW_RESEND
 	select CPU_PM if (SUSPEND || CPU_IDLE)
@@ -126,11 +126,6 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -208,6 +203,13 @@ config ARM_PATCH_PHYS_VIRT
 	  this feature (eg, building a kernel for a single machine) and
 	  you need to shrink the kernel to the minimal size.
 
+config NEED_MACH_GPIO_H
+	bool
+	help
+	  Select this when mach/gpio.h is required to provide special
+	  definitions for this platform. The need for mach/gpio.h should
+	  be avoided when possible.
+
 config NEED_MACH_IO_H
 	bool
 	help
@@ -253,39 +255,29 @@ config MMU
 #
 choice
 	prompt "ARM system type"
-	default ARCH_VERSATILE
+	default ARCH_MULTIPLATFORM
 
-config ARCH_SOCFPGA
-	bool "Altera SOCFPGA family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_GIC
-	select CACHE_L2X0
-	select CLKDEV_LOOKUP
+config ARCH_MULTIPLATFORM
+	bool "Allow multiple platforms to be selected"
+	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR
 	select COMMON_CLK
-	select CPU_V7
-	select DW_APB_TIMER
-	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select HAVE_ARM_SCU
+	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
-	help
-	  This enables support for Altera SOCFPGA Cyclone V platform
+	depends on MMU
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
 	select COMMON_CLK
-	select CLK_VERSATILE
+	select COMMON_CLK_VERSATILE
 	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
-	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -295,13 +287,12 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
+	select COMMON_CLK_VERSATILE
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
@@ -318,7 +309,6 @@ config ARCH_VERSATILE
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select NEED_MACH_IO_H if PCI
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
@@ -327,69 +317,41 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	select HAVE_PATA_PLATFORM
-	select ICST
-	select NO_IOPORT
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	help
-	  This enables support for the ARM Ltd Versatile Express boards.
-
 config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
 	help
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
 
-config ARCH_BCMRING
-	bool "Broadcom BCMRING"
-	depends on MMU
-	select CPU_V6
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	help
-	  Support for Broadcom's BCMRing platform.
-
-config ARCH_HIGHBANK
-	bool "Calxeda Highbank-based"
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
-	select ARM_GIC
+	select ARM_ERRATA_411920
 	select ARM_TIMER_SP804
-	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
-	select CPU_V7
+	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU
-	select HAVE_SMP
+	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
 	help
-	  Support for the Calxeda Highbank SoC based boards.
+	  This enables support for the Broadcom BCM2835 SoC. This SoC is
+	  use in the Raspberry Pi, and Roku 2 devices.
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select CPU_ARM720T
 	select ARCH_USES_GETTIMEOFFSET
+	select COMMON_CLK
+	select CLKDEV_LOOKUP
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
@@ -413,21 +375,19 @@ config ARCH_GEMINI
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
-config ARCH_PRIMA2
-	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
-	select CPU_V7
+config ARCH_SIRF
+	bool "CSR SiRF"
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_SIRF
 	select USE_OF
-	select ZONE_DMA
 	help
-          Support for CSR SiRFSoC ARM Cortex A9 Platform
+	  Support for CSR SiRFprimaII/Marco/Polo platforms
 
 config ARCH_EBSA110
 	bool "EBSA-110"
@@ -462,7 +422,7 @@ config ARCH_FOOTBRIDGE
 	select FOOTBRIDGE
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
-	select NEED_MACH_IO_H
+	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
@@ -489,7 +449,9 @@ config ARCH_MXS
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select HAVE_CLK_PREPARE
+	select MULTI_IRQ_HANDLER
 	select PINCTRL
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
@@ -519,7 +481,6 @@ config ARCH_IOP13XX
 	select PCI
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
-	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
 	help
@@ -529,6 +490,7 @@ config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	select NEED_RET_TO_USER
 	select PLAT_IOP
@@ -542,6 +504,7 @@ config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	select NEED_RET_TO_USER
 	select PLAT_IOP
@@ -564,26 +527,14 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_MVEBU
-	bool "Marvell SOCs with Device Tree support"
-	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
-	select COMMON_CLK
-	help
-	  Support for the Marvell SoC Family with device tree support
-
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_V7
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select MIGHT_HAVE_PCI
+	select PLAT_ORION_LEGACY
+	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -593,8 +544,7 @@ config ARCH_KIRKWOOD
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -620,8 +570,7 @@ config ARCH_MV78XX0
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -633,8 +582,7 @@ config ARCH_ORION5X
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -651,6 +599,7 @@ config ARCH_MMP
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select GENERIC_ALLOCATOR
+	select NEED_MACH_GPIO_H
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -658,8 +607,9 @@ config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -689,40 +639,13 @@ config ARCH_TEGRA
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select NEED_MACH_IO_H if PCI
 	select ARCH_HAS_CPUFREQ
 	select USE_OF
+	select COMMON_CLK
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
 
-config ARCH_PICOXCELL
-	bool "Picochip picoXcell"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select CPU_V6K
-	select DW_APB_TIMER
-	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select HAVE_TCM
-	select NO_IOPORT
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for systems based on the Picochip picoXcell
-	  family of Femtocell devices.  The picoxcell support requires device tree
-	  for all boards.
-
-config ARCH_PNX4008
-	bool "Philips Nexperia PNX4008 Mobile"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for Philips PNX4008 mobile platform.
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
@@ -739,6 +662,7 @@ config ARCH_PXA
 	select MULTI_IRQ_HANDLER
 	select ARM_CPU_SUSPEND if PM
 	select HAVE_IDE
+	select NEED_MACH_GPIO_H
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -801,6 +725,7 @@ config ARCH_SA1100
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -816,6 +741,7 @@ config ARCH_S3C24XX
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
@@ -843,6 +769,7 @@ config ARCH_S3C64XX
 	select SAMSUNG_GPIOLIB_4BIT
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S3C64XX series based systems
 
@@ -857,6 +784,7 @@ config ARCH_S5P64X0
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -871,6 +799,7 @@ config ARCH_S5PC100
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5PC100 series based systems
 
@@ -888,6 +817,7 @@ config ARCH_S5PV210
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Samsung S5PV210/S5PC110 series based systems
@@ -905,6 +835,7 @@ config ARCH_EXYNOS
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
@@ -918,7 +849,6 @@ config ARCH_SHARK
 	select PCI
 	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
-	select NEED_MACH_IO_H
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -937,6 +867,7 @@ config ARCH_U300
 	select COMMON_CLK
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select SPARSE_IRQ
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
@@ -962,6 +893,7 @@ config ARCH_NOMADIK
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select PINCTRL
+	select PINCTRL_STN8815
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -977,6 +909,7 @@ config ARCH_DAVINCI
 	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_CHIP
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's DaVinci platform.
 
@@ -989,6 +922,7 @@ config ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
@@ -1011,6 +945,10 @@ config ARCH_VT8500
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+	select COMMON_CLK
+	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 
@@ -1028,6 +966,50 @@ config ARCH_ZYNQ
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
 endchoice
 
+menu "Multiple platform selection"
+	depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	select ARCH_MULTI_V4_V5
+	depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	select ARCH_MULTI_V4_V5
+	depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	select ARCH_MULTI_V4_V5
+	depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	select CPU_V6
+	select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	select CPU_V7
+	select ARCH_VEXPRESS
+	default y
+	select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V6_V7
+	bool
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -1037,8 +1019,6 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
 source "arch/arm/mach-clps711x/Kconfig"
 
 source "arch/arm/mach-cns3xxx/Kconfig"
@@ -1055,6 +1035,8 @@ source "arch/arm/mach-gemini/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
+source "arch/arm/mach-highbank/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -1090,6 +1072,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-picoxcell/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 
@@ -1102,6 +1086,8 @@ source "arch/arm/mach-sa1100/Kconfig"
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 
+source "arch/arm/mach-socfpga/Kconfig"
+
 source "arch/arm/plat-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
@@ -1124,6 +1110,8 @@ source "arch/arm/mach-exynos/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
+source "arch/arm/mach-prima2/Kconfig"
+
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -1135,8 +1123,6 @@ source "arch/arm/mach-versatile/Kconfig"
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
-source "arch/arm/mach-vt8500/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -1154,6 +1140,10 @@ config PLAT_ORION
 	select IRQ_DOMAIN
 	select COMMON_CLK
 
+config PLAT_ORION_LEGACY
+	bool
+	select PLAT_ORION
+
 config PLAT_PXA
 	bool
 
@@ -1185,12 +1175,6 @@ config XSCALE_PMU
 	depends on CPU_XSCALE
 	default y
 
-config CPU_HAS_PMU
-	depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
-		   (!ARCH_OMAP3 || OMAP3_EMU)
-	default y
-	bool
-
 config MULTI_IRQ_HANDLER
 	bool
 	help
@@ -1419,6 +1403,16 @@ config PL310_ERRATA_769419
 	  on systems with an outer cache, the store buffer is drained
 	  explicitly.
 
+config ARM_ERRATA_775420
+       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+       depends on CPU_V7
+       help
+	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 operation aborts with MMU exception, it might cause the processor
+	 to deadlock. This workaround puts DSB before executing ISB if
+	 an abort may occur on cache maintenance.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1629,6 +1623,7 @@ config ARCH_NR_GPIO
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
+	default 288 if ARCH_VT8500
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
@@ -1763,7 +1758,7 @@ config HIGHPTE
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && CPU_HAS_PMU
+	depends on PERF_EVENTS
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -1787,59 +1782,6 @@ config FORCE_MAX_ZONEORDER
 	  This config option is actually maximum order plus one. For example,
 	  a value of 11 means that the largest free memory block is 2^10 pages.
 
-config LEDS
-	bool "Timer and CPU usage LEDs"
-	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
-		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
-		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
-	help
-	  If you say Y here, the LEDs on your machine will be used
-	  to provide useful information about your current system status.
-
-	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
-	  be able to select which LEDs are active using the options below. If
-	  you are compiling a kernel for the EBSA-110 or the LART however, the
-	  red LED will simply flash regularly to indicate that the system is
-	  still functional. It is safe to say Y here if you have a CATS
-	  system, but the driver will do nothing.
-
-config LEDS_TIMER
-	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			    || MACH_OMAP_PERSEUS2
-	depends on LEDS
-	depends on !GENERIC_CLOCKEVENTS
-	default y if ARCH_EBSA110
-	help
-	  If you say Y here, one of the system LEDs (the green one on the
-	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
-	  will flash regularly to indicate that the system is still
-	  operational. This is mainly useful to kernel hackers who are
-	  debugging unstable kernels.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
-config LEDS_CPU
-	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-			!ARCH_OMAP) \
-			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			|| MACH_OMAP_PERSEUS2
-	depends on LEDS
-	help
-	  If you say Y here, the red LED will be used to give a good real
-	  time indication of CPU usage, by lighting whenever the idle task
-	  is not currently executing.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
 config ALIGNMENT_TRAP
 	bool
 	depends on CPU_CP15_MMU
@@ -1855,8 +1797,8 @@ config ALIGNMENT_TRAP
 	  configuration it is safe to say N, otherwise say Y.
 
 config UACCESS_WITH_MEMCPY
-	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
-	depends on MMU && EXPERIMENTAL
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
+	depends on MMU
 	default y if CPU_FEROCEON
 	help
 	  Implement faster copy_to_user and clear_user methods for CPU
@@ -1897,11 +1839,15 @@ config CC_STACKPROTECTOR
 	  neutralized via a kernel panic.
 	  This feature requires gcc version 4.2 or above.
 
-config DEPRECATED_PARAM_STRUCT
-	bool "Provide old way to pass kernel parameters"
+config XEN_DOM0
+	def_bool y
+	depends on XEN
+
+config XEN
+	bool "Xen guest support on ARM (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ARM && OF
 	help
-	  This was deprecated in 2001 and announced to live on for 5 years.
-	  Some old boot loaders still use this way.
+	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
 endmenu
 
@@ -1915,6 +1861,23 @@ config USE_OF
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ATAGS
+	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	default y
+	help
+	  This is the traditional way of passing data to the kernel at boot
+	  time. If you are solely relying on the flattened device tree (or
+	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
+	  to remove ATAGS support from your kernel binary.  If unsure,
+	  leave this to y.
+
+config DEPRECATED_PARAM_STRUCT
+	bool "Provide old way to pass kernel parameters"
+	depends on ATAGS
+	help
+	  This was deprecated in 2001 and announced to live on for 5 years.
+	  Some old boot loaders still use this way.
+
 # Compressed boot loader in ROM.  Yes, we really want to ask about
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
@@ -2041,6 +2004,7 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
+	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -2066,7 +2030,7 @@ endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM && !ARM_LPAE
+	depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2110,7 +2074,7 @@ config KEXEC
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
-	depends on KEXEC
+	depends on ATAGS && KEXEC
 	default y
 	help
 	  Should the atags used to boot the kernel be exported in an "atags"
@@ -2150,6 +2114,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
@@ -2318,7 +2283,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5PC100 && !ARCH_TEGRA
+	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f15f82bf3a50..b0f3857b3a4c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -224,6 +224,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q UART4.
 
+	config DEBUG_MMP_UART2
+		bool "Kernel low-level debugging message via MMP UART2"
+		depends on ARCH_MMP
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MMP UART2.
+
+	config DEBUG_MMP_UART3
+		bool "Kernel low-level debugging message via MMP UART3"
+		depends on ARCH_MMP
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MMP UART3.
+
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
@@ -261,6 +275,20 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
 
+	config DEBUG_MVEBU_UART
+		bool "Kernel low-level debugging messages via MVEBU UART"
+		depends on ARCH_MVEBU
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MVEBU based platforms.
+
+	config DEBUG_PICOXCELL_UART
+		depends on ARCH_PICOXCELL
+		bool "Use PicoXcell UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on PicoXcell based platforms.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -310,6 +338,13 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_SOCFPGA_UART
+		depends on ARCH_SOCFPGA
+		bool "Use SOCFPGA UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA based platforms.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -338,6 +373,7 @@ choice
 
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
+		depends on !ARCH_MULTIPLATFORM
 		help
 		  Say Y here if your platform doesn't provide a UART option
 		  below. This relies on your platform choosing the right UART
@@ -356,15 +392,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 
@@ -373,6 +409,17 @@ choice
 
 endchoice
 
+config DEBUG_LL_INCLUDE
+	string
+	default "debug/icedcc.S" if DEBUG_ICEDCC
+	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
+		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+	default "mach/debug-macro.S"
+
 config EARLY_PRINTK
 	bool "Early printk"
 	depends on DEBUG_LL
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30eae87ead6d..f023e3acdfbd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,84 +135,78 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_AT91)		:= at91
-machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
-machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		:= cns3xxx
-machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
-machine-$(CONFIG_ARCH_DOVE)		:= dove
-machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
-machine-$(CONFIG_ARCH_GEMINI)		:= gemini
-machine-$(CONFIG_ARCH_H720X)		:= h720x
-machine-$(CONFIG_ARCH_HIGHBANK)		:= highbank
-machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
-machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
-machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
-machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
-machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
-machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
-machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
-machine-$(CONFIG_ARCH_MMP)		:= mmp
-machine-$(CONFIG_ARCH_MSM)		:= msm
-machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MXS)		:= mxs
-machine-$(CONFIG_ARCH_MVEBU)		:= mvebu
-machine-$(CONFIG_ARCH_NETX)		:= netx
-machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
-machine-$(CONFIG_ARCH_OMAP1)		:= omap1
-machine-$(CONFIG_ARCH_OMAP2PLUS)	:= omap2
-machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
-machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
-machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
-machine-$(CONFIG_ARCH_PXA)		:= pxa
-machine-$(CONFIG_ARCH_REALVIEW)		:= realview
-machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2440
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
-machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
-machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
-machine-$(CONFIG_ARCH_EXYNOS5)		:= exynos
-machine-$(CONFIG_ARCH_SA1100)		:= sa1100
-machine-$(CONFIG_ARCH_SHARK)		:= shark
-machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_TEGRA)		:= tegra
-machine-$(CONFIG_ARCH_U300)		:= u300
-machine-$(CONFIG_ARCH_U8500)		:= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
-machine-$(CONFIG_ARCH_VT8500)		:= vt8500
-machine-$(CONFIG_ARCH_W90X900)		:= w90x900
-machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_ARCH_SOCFPGA)		:= socfpga
-machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
-machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
-machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
-machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
+machine-$(CONFIG_ARCH_AT91)		+= at91
+machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
+machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
+machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
+machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DOVE)		+= dove
+machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		+= gemini
+machine-$(CONFIG_ARCH_H720X)		+= h720x
+machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
+machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
+machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		+= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		+= ks8695
+machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
+machine-$(CONFIG_ARCH_MMP)		+= mmp
+machine-$(CONFIG_ARCH_MSM)		+= msm
+machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
+machine-$(CONFIG_ARCH_MXC)		+= imx
+machine-$(CONFIG_ARCH_MXS)		+= mxs
+machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
+machine-$(CONFIG_ARCH_NETX)		+= netx
+machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_OMAP1)		+= omap1
+machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
+machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
+machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
+machine-$(CONFIG_ARCH_PRIMA2)		+= prima2
+machine-$(CONFIG_ARCH_PXA)		+= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_RPC)		+= rpc
+machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
+machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
+machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
+machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
+machine-$(CONFIG_ARCH_SA1100)		+= sa1100
+machine-$(CONFIG_ARCH_SHARK)		+= shark
+machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_TEGRA)		+= tegra
+machine-$(CONFIG_ARCH_U300)		+= u300
+machine-$(CONFIG_ARCH_U8500)		+= ux500
+machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
+machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
+machine-$(CONFIG_ARCH_VT8500)		+= vt8500
+machine-$(CONFIG_ARCH_W90X900)		+= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
+machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx
+machine-$(CONFIG_ARCH_SPEAR3XX)		+= spear3xx
+machine-$(CONFIG_MACH_SPEAR600)		+= spear6xx
+machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC)		:= mxc
-plat-$(CONFIG_ARCH_OMAP)	:= omap
-plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_ZYNQ)	:= versatile
-plat-$(CONFIG_PLAT_IOP)		:= iop
-plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
-plat-$(CONFIG_PLAT_ORION)	:= orion
-plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P)		:= samsung
-plat-$(CONFIG_PLAT_SPEAR)	:= spear
-plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
+plat-$(CONFIG_ARCH_MXC)		+= mxc
+plat-$(CONFIG_ARCH_OMAP)	+= omap
+plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
+plat-$(CONFIG_ARCH_ZYNQ)	+= versatile
+plat-$(CONFIG_PLAT_IOP)		+= iop
+plat-$(CONFIG_PLAT_NOMADIK)	+= nomadik
+plat-$(CONFIG_PLAT_ORION)	+= orion
+plat-$(CONFIG_PLAT_PXA)		+= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	+= s3c24xx samsung
+plat-$(CONFIG_PLAT_S5P)		+= samsung
+plat-$(CONFIG_PLAT_SPEAR)	+= spear
+plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -230,15 +224,20 @@ MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
 else
 MACHINE  :=
 endif
+ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+MACHINE  :=
+endif
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
 
+ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
 ifeq ($(KBUILD_SRC),)
 KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
 else
 KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
 endif
+endif
 
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
@@ -251,10 +250,12 @@ endif
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
+core-$(CONFIG_XEN)		+= arch/arm/xen/
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= arch/arm/net/
+core-y				+= arch/arm/crypto/
 core-y				+= $(machdirs) $(platdirs)
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
@@ -268,7 +269,12 @@ else
 KBUILD_IMAGE := zImage
 endif
 
-all:	$(KBUILD_IMAGE)
+# Build the DT binary blobs if we have OF configured
+ifeq ($(CONFIG_USE_OF),y)
+KBUILD_DTBS := dtbs
+endif
+
+all:	$(KBUILD_IMAGE) $(KBUILD_DTBS)
 
 boot := arch/arm/boot
 
@@ -284,10 +290,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
@@ -306,7 +312,7 @@ define archhelp
   echo  '  uImage        - U-Boot wrapped zImage'
   echo  '  bootpImage    - Combined zImage and initial RAM disk' 
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
-  echo  '  dtbs          - Build device tree blobs for enabled boards'
+  echo  '* dtbs          - Build device tree blobs for enabled boards'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index c877087d2000..3fdab016aa5c 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
 include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
+include $(srctree)/arch/arm/boot/dts/Makefile
+
 # Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index f41b38cafce8..9deb56a702ce 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -32,6 +32,9 @@ extern void error(char *);
 #  define Tracecv(c,x)
 #endif
 
+/* Not needed, but used in some headers pulled in by decompressors */
+extern char * strstr(const char * s1, const char *s2);
+
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b8c64b80bafc..bc67cbff3944 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -653,16 +653,21 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
 #endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 8e2a8fca5ed2..df899834d84e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -25,7 +25,13 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 extern void error(char *x);
 
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+static inline void putc(int c) {}
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
+#else
 #include <mach/uncompress.h>
+#endif
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
new file mode 100644
index 000000000000..29f541f0e653
--- /dev/null
+++ b/arch/arm/boot/dts/Makefile
@@ -0,0 +1,108 @@
+ifeq ($(CONFIG_OF),y)
+
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
+	at91sam9263ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9m10g45ek.dtb \
+	at91sam9n12ek.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	kizbox.dtb \
+	tny_a9260.dtb \
+	tny_a9263.dtb \
+	tny_a9g20.dtb \
+	usb_a9260.dtb \
+	usb_a9263.dtb \
+	usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-dove-db.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+	exynos4210-smdkv310.dtb \
+	exynos4210-trats.dtb \
+	exynos5250-smdk5250.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
+	imx53-ard.dtb \
+	imx53-evk.dtb \
+	imx53-qsb.dtb \
+	imx53-smd.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+	msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+	armada-xp-db.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+	imx53-ard.dtb \
+	imx53-evk.dtb \
+	imx53-qsb.dtb \
+	imx53-smd.dtb \
+	imx6q-arm2.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10049.dtb \
+	imx28-evk.dtb \
+	imx28-m28evk.dtb \
+	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-evm.dtb \
+	omap3-tobi.dtb \
+	omap4-panda.dtb \
+	omap4-pandaES.dtb \
+	omap4-var_som.dtb \
+	omap4-sdp.dtb \
+	omap5-evm.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	r8a7740-armadillo800eva.dtb \
+	sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+	spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+	spear310-evb.dtb \
+	spear320-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb \
+	tegra20-whistler.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb \
+	xenvm-4.2.dtb
+
+endif
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db7234c..c634f87e230e 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,64 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@24 {
+				reg = <0x24>;
+			};
+
+		};
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9eff72..185d6325a458 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,104 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c48d7e5..bb31bff01998 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -69,90 +69,146 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x44e07000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <96>;
 		};
 
-		gpio2: gpio@4804C000 {
+		gpio2: gpio@4804c000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x4804c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <98>;
 		};
 
-		gpio3: gpio@481AC000 {
+		gpio3: gpio@481ac000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ac000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <32>;
 		};
 
-		gpio4: gpio@481AE000 {
+		gpio4: gpio@481ae000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ae000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <62>;
 		};
 
-		uart1: serial@44E09000 {
+		uart1: serial@44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
+			reg = <0x44e09000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <72>;
+			status = "disabled";
 		};
 
 		uart2: serial@48022000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
+			reg = <0x48022000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <73>;
+			status = "disabled";
 		};
 
 		uart3: serial@48024000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
+			reg = <0x48024000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <74>;
+			status = "disabled";
 		};
 
-		uart4: serial@481A6000 {
+		uart4: serial@481a6000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
+			reg = <0x481a6000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <44>;
+			status = "disabled";
 		};
 
-		uart5: serial@481A8000 {
+		uart5: serial@481a8000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
+			reg = <0x481a8000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <45>;
+			status = "disabled";
 		};
 
-		uart6: serial@481AA000 {
+		uart6: serial@481aa000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
+			reg = <0x481aa000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <46>;
+			status = "disabled";
 		};
 
-		i2c1: i2c@44E0B000 {
+		i2c1: i2c@44e0b000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <70>;
+			status = "disabled";
 		};
 
-		i2c2: i2c@4802A000 {
+		i2c2: i2c@4802a000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <71>;
+			status = "disabled";
 		};
 
-		i2c3: i2c@4819C000 {
+		i2c3: i2c@4819c000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <91>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6b6b932a5a7d..16cc82cdaa81 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -63,6 +63,11 @@
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+		addr-decoding@d0020000 {
+			compatible = "marvell,armada-addr-decoding-controller";
+			reg = <0xd0020000 0x258>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3228ccc83332..2069151afe01 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -21,6 +21,12 @@
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
 		    <0xd0021870 0x58>;
@@ -31,5 +37,43 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+		pinctrl {
+			compatible = "marvell,mv88f6710-pinctrl";
+			reg = <0xd0018000 0x38>;
+	        };
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <82>, <83>, <84>, <85>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <87>, <88>, <89>, <90>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
+			ngpios = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <91>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f97040d4258d..b1fc728515e9 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000000..ea355192be6f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78230-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <17>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000000..2057863f3dfa
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78260-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000000..ffac98373792
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78460-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+ };
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 66389c1c6f62..7c95f76398de 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -104,6 +104,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -113,6 +114,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -122,6 +124,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index b460d6ce9eb5..195019b7ca0e 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -95,6 +95,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff400 {
@@ -104,6 +105,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff600 {
@@ -113,6 +115,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffff800 {
@@ -122,6 +125,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioE: gpio@fffffa00 {
@@ -131,6 +135,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 7829a4d0cb22..96514c134e54 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index bafa8806fc17..63751b1e744b 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -113,6 +113,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff400 {
@@ -122,6 +123,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff600 {
@@ -131,6 +133,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffff800 {
@@ -140,6 +143,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioE: gpio@fffffa00 {
@@ -149,6 +153,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index bfac0dfc332c..ef9336ae9614 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -107,6 +107,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -116,6 +117,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -125,6 +127,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffffa00 {
@@ -134,6 +137,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 4a18c393b136..8a387a8d61b7 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -115,6 +115,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -124,6 +125,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -133,6 +135,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffffa00 {
@@ -142,6 +145,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
new file mode 100644
index 000000000000..7dd860f83f96
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+/memreserve/ 0x0c000000 0x04000000;
+/include/ "bcm2835.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory {
+		reg = <0 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
new file mode 100644
index 000000000000..0b619398532c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -0,0 +1,39 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+
+		timer {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			clock-frequency = <1000000>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart@20201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 3180a9c588b9..748ba7aa746c 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -194,6 +194,8 @@
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			ranges;
 
 			prcmu-timer-4@80157450 {
@@ -330,6 +332,7 @@
 			ab8500@5 {
 				compatible = "stericsson,ab8500";
 				reg = <5>; /* mailbox 5 is i2c */
+				interrupt-parent = <&intc>;
 				interrupts = <0 40 0x4>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -371,7 +374,7 @@
 				};
 
 				ab8500-ponkey {
-					compatible = "stericsson,ab8500-ponkey";
+					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 0x4
 						      7 0x4>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
@@ -389,6 +392,12 @@
 					compatible = "stericsson,ab8500-debug";
 				};
 
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
 				ab8500-regulators {
 					compatible = "stericsson,ab8500-regulator";
 
@@ -471,48 +480,63 @@
 		};
 
 		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		ssp@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
-			reg = <80002000 0x1000>;
+			reg = <0x80002000 0x1000>;
 			interrupts = <0 14 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -580,6 +604,39 @@
 			status = "disabled";
 		};
 
+		msp0: msp@80123000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80123000 0x1000>;
+			interrupts = <0 31 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		msp1: msp@80124000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80124000 0x1000>;
+			interrupts = <0 62 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		// HDMI sound
+		msp2: msp@80117000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80117000 0x1000>;
+			interrupts = <0 98 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		msp3: msp@80125000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80125000 0x1000>;
+			interrupts = <0 62 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
 		external-bus@50000000 {
 			compatible = "simple-bus";
 			reg = <0x50000000 0x4000000>;
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
new file mode 100644
index 000000000000..61a8062e56de
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 000000000000..0adbd5a38095
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
new file mode 100644
index 000000000000..e5a920beab45
--- /dev/null
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
new file mode 100644
index 000000000000..96fb824b5e6e
--- /dev/null
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -0,0 +1,143 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
+
+	mbus@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		wdt: wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
index d79b28d9c963..a4ba31b23c88 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -166,9 +166,116 @@
 		#size-cells = <0>;
 		autorepeat;
 		button@21 {
-			label = "GPIO Key UP";
+			label = "Interrupt Key";
 			linux,code = <103>;
 			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
 		};
+		key1 {
+			label = "KEY1";
+			linux,code = <1>;
+			gpios = <&pca9532 0 0>;
+		};
+		key2 {
+			label = "KEY2";
+			linux,code = <2>;
+			gpios = <&pca9532 1 0>;
+		};
+		key3 {
+			label = "KEY3";
+			linux,code = <3>;
+			gpios = <&pca9532 2 0>;
+		};
+		key4 {
+			label = "KEY4";
+			linux,code = <4>;
+			gpios = <&pca9532 3 0>;
+		};
+		joy0 {
+			label = "Joystick Key 0";
+			linux,code = <10>;
+			gpios = <&gpio 2 0 0>; /* P2.0 */
+		};
+		joy1 {
+			label = "Joystick Key 1";
+			linux,code = <11>;
+			gpios = <&gpio 2 1 0>; /* P2.1 */
+		};
+		joy2 {
+			label = "Joystick Key 2";
+			linux,code = <12>;
+			gpios = <&gpio 2 2 0>; /* P2.2 */
+		};
+		joy3 {
+			label = "Joystick Key 3";
+			linux,code = <13>;
+			gpios = <&gpio 2 3 0>; /* P2.3 */
+		};
+		joy4 {
+			label = "Joystick Key 4";
+			linux,code = <14>;
+			gpios = <&gpio 2 4 0>; /* P2.4 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* LEDs on OEM Board */
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio 2 10 1>; /* P2.10, active low */
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio 2 11 1>; /* P2.11, active low */
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio 2 12 1>; /* P2.12, active low */
+			default-state = "off";
+		};
+
+		/* LEDs on Base Board */
+
+		lede1 {
+			gpios = <&pca9532 8 0>;
+			default-state = "off";
+		};
+		lede2 {
+			gpios = <&pca9532 9 0>;
+			default-state = "off";
+		};
+		lede3 {
+			gpios = <&pca9532 10 0>;
+			default-state = "off";
+		};
+		lede4 {
+			gpios = <&pca9532 11 0>;
+			default-state = "off";
+		};
+		lede5 {
+			gpios = <&pca9532 12 0>;
+			default-state = "off";
+		};
+		lede6 {
+			gpios = <&pca9532 13 0>;
+			default-state = "off";
+		};
+		lede7 {
+			gpios = <&pca9532 14 0>;
+			default-state = "off";
+		};
+		lede8 {
+			gpios = <&pca9532 15 0>;
+			default-state = "off";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 000000000000..f97f70f83374
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+	elpida_ECB240ABACN: lpddr2 {
+		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		density		= <2048>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <400000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <200000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <10000>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
new file mode 100644
index 000000000000..a26c3dd58269
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -0,0 +1,248 @@
+/*
+ * Samsung's Exynos4 SoC series common device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
+ * SoCs from Exynos4 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	gic:interrupt-controller@10490000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0x10440000 0x1000>;
+	};
+
+	watchdog@10060000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 43 0>;
+		status = "disabled";
+	};
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <0 44 0>, <0 45 0>;
+		status = "disabled";
+	};
+
+	keypad@100A0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <0 109 0>;
+		status = "disabled";
+	};
+
+	sdhci@12510000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12510000 0x100>;
+		interrupts = <0 73 0>;
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12520000 0x100>;
+		interrupts = <0 74 0>;
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12530000 0x100>;
+		interrupts = <0 75 0>;
+		status = "disabled";
+	};
+
+	sdhci@12540000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12540000 0x100>;
+		interrupts = <0 76 0>;
+		status = "disabled";
+	};
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 52 0>;
+		status = "disabled";
+	};
+
+	serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x100>;
+		interrupts = <0 53 0>;
+		status = "disabled";
+	};
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		status = "disabled";
+	};
+
+	serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x100>;
+		interrupts = <0 55 0>;
+		status = "disabled";
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13860000 0x100>;
+		interrupts = <0 58 0>;
+		status = "disabled";
+	};
+
+	i2c@13870000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <0 59 0>;
+		status = "disabled";
+	};
+
+	i2c@13880000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13880000 0x100>;
+		interrupts = <0 60 0>;
+		status = "disabled";
+	};
+
+	i2c@13890000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13890000 0x100>;
+		interrupts = <0 61 0>;
+		status = "disabled";
+	};
+
+	i2c@138A0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138A0000 0x100>;
+		interrupts = <0 62 0>;
+		status = "disabled";
+	};
+
+	i2c@138B0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138B0000 0x100>;
+		interrupts = <0 63 0>;
+		status = "disabled";
+	};
+
+	i2c@138C0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138C0000 0x100>;
+		interrupts = <0 64 0>;
+		status = "disabled";
+	};
+
+	i2c@138D0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138D0000 0x100>;
+		interrupts = <0 65 0>;
+		status = "disabled";
+	};
+
+	spi_0: spi@13920000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13920000 0x100>;
+		interrupts = <0 66 0>;
+		tx-dma-channel = <&pdma0 7>; /* preliminary */
+		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi_1: spi@13930000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13930000 0x100>;
+		interrupts = <0 67 0>;
+		tx-dma-channel = <&pdma1 7>; /* preliminary */
+		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi_2: spi@13940000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13940000 0x100>;
+		interrupts = <0 68 0>;
+		tx-dma-channel = <&pdma0 9>; /* preliminary */
+		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <0 35 0>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <0 36 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0c49caa09978..3e68f52e8454 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -40,6 +40,7 @@
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	sdhci@12510000 {
@@ -53,6 +54,7 @@
 			<&gpk0 4 2 3 3>,
 			<&gpk0 5 2 3 3>,
 			<&gpk0 6 2 3 3>;
+		status = "okay";
 	};
 
 	gpio_keys {
@@ -62,88 +64,45 @@
 
 		up {
 			label = "Up";
-			gpios = <&gpx2 0 0 0 2>;
+			gpios = <&gpx2 0 0 0x10000 2>;
 			linux,code = <103>;
+			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
-			gpios = <&gpx2 1 0 0 2>;
+			gpios = <&gpx2 1 0 0x10000 2>;
 			linux,code = <108>;
+			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
-			gpios = <&gpx1 7 0 0 2>;
+			gpios = <&gpx1 7 0 0x10000 2>;
 			linux,code = <158>;
+			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
-			gpios = <&gpx1 6 0 0 2>;
+			gpios = <&gpx1 6 0 0x10000 2>;
 			linux,code = <102>;
+			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
-			gpios = <&gpx1 5 0 0 2>;
+			gpios = <&gpx1 5 0 0x10000 2>;
 			linux,code = <139>;
+			gpio-key,wakeup;
 		};
 	};
 
-	keypad@100A0000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13860000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		status = "disabled";
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpx1 3 0 0x10000 2>;
+			linux,default-trigger = "heartbeat";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
new file mode 100644
index 000000000000..b12cf272ad0d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -0,0 +1,457 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-6", "gpb-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <4>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 1beccc8f14ff..63610c3ba3af 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {
@@ -40,6 +40,7 @@
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	keypad@100A0000 {
@@ -47,6 +48,7 @@
 		samsung,keypad-num-columns = <8>;
 		linux,keypad-no-autorepeat;
 		linux,keypad-wakeup;
+		status = "okay";
 
 		row-gpios = <&gpx2 0 3 3 0>,
 			    <&gpx2 1 3 3 0>;
@@ -128,6 +130,7 @@
 		samsung,i2c-max-bus-freq = <20000>;
 		gpios = <&gpd1 0 2 3 0>,
 			<&gpd1 1 2 3 0>;
+		status = "okay";
 
 		eeprom@50 {
 			compatible = "samsung,24ad0xd1";
@@ -140,58 +143,11 @@
 		};
 	};
 
-	sdhci@12510000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
 	spi_2: spi@13940000 {
 		gpios = <&gpc1 1 5 3 0>,
 			<&gpc1 3 5 3 0>,
 			<&gpc1 4 5 3 0>;
+		status = "okay";
 
 		w25x80@0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
new file mode 100644
index 000000000000..73567b843e72
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -0,0 +1,237 @@
+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210";
+
+	memory {
+		reg =  <0x40000000 0x20000000
+			0x60000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+	};
+
+	vemmc_reg: voltage-regulator@0 {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 1 0 0>;
+		enable-active-high;
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		broken-voltage;
+		gpios = <&gpk0 0 2 0 3>,
+			<&gpk0 1 2 0 3>,
+			<&gpk0 3 2 2 3>,
+			<&gpk0 4 2 2 3>,
+			<&gpk0 5 2 2 3>,
+			<&gpk0 6 2 2 3>,
+			<&gpk1 3 3 3 3>,
+			<&gpk1 4 3 3 3>,
+			<&gpk1 5 3 3 3>,
+			<&gpk1 6 3 3 3>;
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		gpios = <&gpb 6 3 3 0>,
+			<&gpb 7 3 3 0>;
+		status = "okay";
+
+		max8997_pmic@66 {
+			compatible = "maxim,max8997-pmic";
+
+			reg = <0x66>;
+
+			max8997,pmic-buck1-uses-gpio-dvs;
+			max8997,pmic-buck2-uses-gpio-dvs;
+			max8997,pmic-buck5-uses-gpio-dvs;
+
+			max8997,pmic-ignore-gpiodvs-side-effect;
+			max8997,pmic-buck125-default-dvs-idx = <0>;
+
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
+						         <&gpx0 6 1 0 0>,
+							 <&gpl0 0 1 0 0>;
+
+			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+							 <1250000>, <1200000>,
+							 <1150000>, <1100000>,
+							 <1000000>, <950000>;
+
+			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+							 <950000>,  <900000>,
+							 <1100000>, <1000000>,
+							 <950000>,  <900000>;
+
+			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				valive_reg: LDO2 {
+				     regulator-name = "VALIVE_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vusb_reg: LDO3 {
+				     regulator-name = "VUSB_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				};
+
+				vmipi_reg: LDO4 {
+				     regulator-name = "VMIPI_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vpda_reg: LDO6 {
+				     regulator-name = "VCC_1.8V_PDA";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				     regulator-always-on;
+				};
+
+				vcam_reg: LDO7 {
+				     regulator-name = "CAM_ISP_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vusbdac_reg: LDO8 {
+				     regulator-name = "VUSB/VDAC_3.3V_C210";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vccpda_reg: LDO9 {
+				     regulator-name = "VCC_2.8V_PDA";
+				     regulator-min-microvolt = <2800000>;
+				     regulator-max-microvolt = <2800000>;
+				     regulator-always-on;
+				};
+
+				vpll_reg: LDO10 {
+				     regulator-name = "VPLL_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vcclcd_reg: LDO13 {
+				     regulator-name = "VCC_3.3V_LCD";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vlcd_reg: LDO15 {
+				     regulator-name = "VLCD_2.2V";
+				     regulator-min-microvolt = <2200000>;
+				     regulator-max-microvolt = <2200000>;
+				};
+
+				camsensor_reg: LDO16 {
+				     regulator-name = "CAM_SENSOR_IO_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vddq_reg: LDO21 {
+				     regulator-name = "VDDQ_M1M2_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				varm_breg: BUCK1 {
+				     regulator-name = "VARM_1.2V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1350000>;
+				     regulator-always-on;
+				};
+
+				vint_breg: BUCK2 {
+				     regulator-name = "VINT_1.1V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				camisp_breg: BUCK4 {
+				     regulator-name = "CAM_ISP_CORE_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				};
+
+				vmem_breg: BUCK5 {
+				     regulator-name = "VMEM_1.2V_C210";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				vccsub_breg: BUCK7 {
+				     regulator-name = "VCC_SUB_2.0V";
+				     regulator-min-microvolt = <2000000>;
+				     regulator-max-microvolt = <2000000>;
+				     regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+				     regulator-name = "SAFEOUT1";
+				     regulator-always-on;
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+				     regulator-name = "SAFEOUT2";
+				     regulator-boot-on;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe876e4..214c557eda7f 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -19,199 +19,60 @@
  * published by the Free Software Foundation.
 */
 
-/include/ "skeleton.dtsi"
+/include/ "exynos4.dtsi"
+/include/ "exynos4210-pinctrl.dtsi"
 
 / {
 	compatible = "samsung,exynos4210";
-	interrupt-parent = <&gic>;
 
 	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
 	};
 
 	gic:interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
 		cpu-offset = <0x8000>;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};
 
 	combiner:interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
 		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
 			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
 			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
-	watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-	};
-
-	rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupts = <0 44 0>, <0 45 0>;
-	};
-
-	keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-	};
-
-	sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-	};
-
-	sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-	};
-
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-	};
-
-	i2c@13860000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-	};
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-	};
-
-	i2c@13880000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@13890000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@138A0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@138B0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	i2c@138C0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-	};
-
-	i2c@138D0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
-		#address-cells = <1>;
-		#size-cells = <0>;
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+				     <0 32 0>;
 		};
+	};
 
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
-		};
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x03860000 0x1000>;
 	};
 
 	gpio-controllers {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 8a5e348793c7..a352df403b7a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -16,12 +16,19 @@
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250";
 
+	aliases {
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
+		mshc3 = &dwmmc_3;
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
 	i2c@12C60000 {
@@ -72,6 +79,56 @@
 		status = "disabled";
 	};
 
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
+				<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
+				<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 004aaa8d123c..dddfd6e444dc 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -27,6 +27,10 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		gsc3 = &gsc_3;
 	};
 
 	gic:interrupt-controller@10481000 {
@@ -182,6 +186,38 @@
 		#size-cells = <0>;
 	};
 
+	dwmmc0@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc1@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12210000 0x1000>;
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc2@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12220000 0x1000>;
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc3@12230000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -460,4 +496,28 @@
 			#gpio-cells = <4>;
 		};
 	};
+
+	gsc_0:  gsc@0x13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+	};
+
+	gsc_1:  gsc@0x13e10000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e10000 0x1000>;
+		interrupts = <0 86 0>;
+	};
+
+	gsc_2:  gsc@0x13e20000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e20000 0x1000>;
+		interrupts = <0 87 0>;
+	};
+
+	gsc_3:  gsc@0x13e30000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e30000 0x1000>;
+		interrupts = <0 88 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 9fecf1ae777b..0c6fc34821f9 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -121,6 +121,10 @@
 			compatible = "calxeda,hb-ahci";
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
+			calxeda,port-phys = <&combophy5 0 &combophy0 0
+					     &combophy0 1 &combophy0 2
+					     &combophy0 3>;
+			dma-coherent;
 		};
 
 		sdhci@ffe0e000 {
@@ -306,5 +310,19 @@
 			reg = <0xfff51000 0x1000>;
 			interrupts = <0 80 4  0 81 4  0 82 4>;
 		};
+
+		combophy0: combo-phy@fff58000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff58000 0x1000>;
+			phydev = <5>;
+		};
+
+		combophy5: combo-phy@fff5d000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff5d000 0x1000>;
+			phydev = <31>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
new file mode 100644
index 000000000000..2131d77dc9c9
--- /dev/null
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 0x1>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 0x1>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				compatible = "lp5521";
+				reg = <0x33>;
+			};
+
+			lp5521@0x34 {
+				compatible = "lp5521";
+				reg = <0x34>;
+			};
+
+			bh1780@0x29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index e3486f486b40..035c13f9d3c0 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -42,12 +42,13 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
 						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
 						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 20912b1d8893..384d8b66f337 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -31,6 +31,22 @@
 				bus-width = <4>;
 				status = "okay";
 			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
 		};
 
 		apbx@80040000 {
@@ -39,6 +55,47 @@
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 0>;
+			linux,default-trigger = "default-on";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 757a327ff3e8..85c3864b6a56 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -36,7 +36,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbfb5ae6..9ca4ca70c1bc 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -43,7 +43,7 @@
 			ranges;
 
 			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+				compatible = "fsl,imx23-icoll", "fsl,icoll";
 				interrupt-controller;
 				#interrupt-cells = <1>;
 				reg = <0x80000000 0x2000>;
@@ -51,11 +51,12 @@
 
 			dma-apbh@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 2000>;
+				reg = <0x80004000 0x2000>;
+				clocks = <&clks 15>;
 			};
 
 			ecc@80008000 {
-				reg = <0x80008000 2000>;
+				reg = <0x80008000 0x2000>;
 				status = "disabled";
 			};
 
@@ -63,23 +64,25 @@
 				compatible = "fsl,imx23-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
-				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";
+				clocks = <&clks 34>;
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
-				reg = <0x80010000 2000>;
+				reg = <0x80010000 0x2000>;
 				interrupts = <15 14>;
+				clocks = <&clks 33>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			etm@80014000 {
-				reg = <0x80014000 2000>;
+				reg = <0x80014000 0x2000>;
 				status = "disabled";
 			};
 
@@ -87,7 +90,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 2000>;
+				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -140,6 +143,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -183,7 +197,6 @@
 						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 					>;
 					fsl,drive-strength = <1>;
@@ -273,32 +286,33 @@
 			};
 
 			emi@80020000 {
-				reg = <0x80020000 2000>;
+				reg = <0x80020000 0x2000>;
 				status = "disabled";
 			};
 
 			dma-apbx@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 2000>;
+				reg = <0x80024000 0x2000>;
+				clocks = <&clks 16>;
 			};
 
 			dcp@80028000 {
-				reg = <0x80028000 2000>;
+				reg = <0x80028000 0x2000>;
 				status = "disabled";
 			};
 
 			pxp@8002a000 {
-				reg = <0x8002a000 2000>;
+				reg = <0x8002a000 0x2000>;
 				status = "disabled";
 			};
 
 			ocotp@8002c000 {
-				reg = <0x8002c000 2000>;
+				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
 
 			axi-ahb@8002e000 {
-				reg = <0x8002e000 2000>;
+				reg = <0x8002e000 0x2000>;
 				status = "disabled";
 			};
 
@@ -306,18 +320,20 @@
 				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
 				interrupts = <46 45>;
+				clocks = <&clks 38>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80034000 {
-				reg = <0x80034000 2000>;
+				reg = <0x80034000 0x2000>;
 				interrupts = <2 20>;
+				clocks = <&clks 33>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			tvenc@80038000 {
-				reg = <0x80038000 2000>;
+				reg = <0x80038000 0x2000>;
 				status = "disabled";
 			};
                 };
@@ -329,38 +345,39 @@
 			reg = <0x80040000 0x40000>;
 			ranges;
 
-			clkctl@80040000 {
-				reg = <0x80040000 2000>;
-				status = "disabled";
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
 			};
 
 			saif0: saif@80042000 {
-				reg = <0x80042000 2000>;
+				reg = <0x80042000 0x2000>;
 				status = "disabled";
 			};
 
 			power@80044000 {
-				reg = <0x80044000 2000>;
+				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
 
 			saif1: saif@80046000 {
-				reg = <0x80046000 2000>;
+				reg = <0x80046000 0x2000>;
 				status = "disabled";
 			};
 
 			audio-out@80048000 {
-				reg = <0x80048000 2000>;
+				reg = <0x80048000 0x2000>;
 				status = "disabled";
 			};
 
 			audio-in@8004c000 {
-				reg = <0x8004c000 2000>;
+				reg = <0x8004c000 0x2000>;
 				status = "disabled";
 			};
 
 			lradc@80050000 {
-				reg = <0x80050000 2000>;
+				reg = <0x80050000 0x2000>;
 				status = "disabled";
 			};
 
@@ -370,33 +387,36 @@
 			};
 
 			i2c@80058000 {
-				reg = <0x80058000 2000>;
+				reg = <0x80058000 0x2000>;
 				status = "disabled";
 			};
 
 			rtc@8005c000 {
 				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 2000>;
+				reg = <0x8005c000 0x2000>;
 				interrupts = <22>;
 			};
 
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 2000>;
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
 
 			timrot@80068000 {
-				reg = <0x80068000 2000>;
-				status = "disabled";
+				compatible = "fsl,imx23-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <28 29 30 31>;
 			};
 
 			auart0: serial@8006c000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <24 25 23>;
+				clocks = <&clks 32>;
 				status = "disabled";
 			};
 
@@ -404,6 +424,7 @@
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <59 60 58>;
+				clocks = <&clks 32>;
 				status = "disabled";
 			};
 
@@ -411,11 +432,15 @@
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x80070000 0x2000>;
 				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
 				status = "disabled";
 			};
 
-			usbphy@8007c000 {
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
 				status = "disabled";
 			};
 		};
@@ -428,8 +453,12 @@
 		reg = <0x80080000 0x80000>;
 		ranges;
 
-		usbctrl@80080000 {
-			reg = <0x80080000 0x10000>;
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
index d3f8296e19e0..0a8978a40ece 100644
--- a/arch/arm/boot/dts/imx27-3ds.dts
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -27,7 +27,7 @@
 				status = "okay";
 			};
 
-			uart@1000a000 {
+			uart1: serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index 2b0ff60247a4..af50469e34b2 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -23,10 +23,6 @@
 	soc {
 		aipi@10000000 { /* aipi */
 
-			wdog@10002000 {
-				status = "okay";
-			};
-
 			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
@@ -49,7 +45,7 @@
 			i2c@1001d000 {
 				clock-frequency = <400000>;
 				status = "okay";
-				at24@4c {
+				at24@52 {
 					compatible = "at,24c32";
 					pagesize = <32>;
 					reg = <0x52>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 00bae3aad5ab..3e54f1498841 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -19,6 +19,12 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
 	};
 
 	avic: avic-interrupt-controller@e0000000 {
@@ -56,7 +62,6 @@
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
-				status = "disabled";
 			};
 
 			uart1: serial@1000a000 {
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index b383417a558f..5171667a7763 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -37,7 +37,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
new file mode 100644
index 000000000000..05c892e931e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi3_pins_cfa10049: spi3-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+						0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
+						0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+
+			ssp3: ssp@80016000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_pins_cfa10049>;
+				status = "okay";
+
+				gpio5: gpio5@0 {
+					compatible = "fairchild,74hc595";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0>;
+					registers-number = <2>;
+					spi-max-frequency = <100000>;
+				};
+
+				gpio6: gpio6@1 {
+					compatible = "fairchild,74hc595";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <1>;
+					registers-number = <4>;
+					spi-max-frequency = <100000>;
+				};
+
+			};
+		};
+
+		apbx@80040000 {
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 773c0e84d1fb..a0ad71ca3a44 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -46,11 +46,28 @@
 				wp-gpios = <&gpio0 28 0>;
 			};
 
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "sst,sst25vf016b";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
 			pinctrl@80018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
@@ -128,6 +145,10 @@
 				status = "okay";
 			};
 
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
@@ -140,6 +161,12 @@
 					VDDIO-supply = <&reg_3p3v>;
 
 				};
+
+				at24@51 {
+					compatible = "at24,24c32";
+					pagesize = <32>;
+					reg = <0x51>;
+				};
 			};
 
 			pwm: pwm@80064000 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 183a3fd2d859..3bab6b00c52d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -23,6 +23,8 @@
 	apb@80000000 {
 		apbh@80000000 {
 			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 				status = "okay";
@@ -61,19 +63,40 @@
 					     &mmc0_cd_cfg
 					     &mmc0_sck_cfg>;
 				bus-width = <8>;
-				wp-gpios = <&gpio3 10 1>;
+				wp-gpios = <&gpio3 10 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
 				status = "okay";
 			};
 
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p80";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
 			pinctrl@80018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
+						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
 						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
 						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -129,6 +152,7 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -151,32 +175,51 @@
 				};
 			};
 
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
 
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
+			usbphy0: usbphy@8007c000 {
 				status = "okay";
 			};
 
-			auart3: serial@80070000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
+				pinctrl-0 = <&auart0_2pins_a>;
 				status = "okay";
 			};
 		};
 	};
 
 	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy0_pins_a>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio3 11 0>;
 			status = "okay";
 		};
 
@@ -198,6 +241,30 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 12 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 13 0>;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 62bf767409a6..37be532f0055 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -25,7 +25,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
@@ -34,6 +34,24 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				mac0_pins_gpio: mac0-gpio-mode@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 		};
 
@@ -72,8 +90,9 @@
 	ahb@80080000 {
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
-			pinctrl-names = "default";
+			pinctrl-names = "default", "gpio_mode";
 			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-1 = <&mac0_pins_gpio>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac68da8..59fbfba23df8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -27,6 +27,8 @@
 		serial2 = &auart2;
 		serial3 = &auart3;
 		serial4 = &auart4;
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
 	};
 
 	cpus {
@@ -50,25 +52,26 @@
 			ranges;
 
 			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
 				interrupt-controller;
 				#interrupt-cells = <1>;
 				reg = <0x80000000 0x2000>;
 			};
 
 			hsadc@80002000 {
-				reg = <0x80002000 2000>;
+				reg = <0x80002000 0x2000>;
 				interrupts = <13 87>;
 				status = "disabled";
 			};
 
 			dma-apbh@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
-				reg = <0x80004000 2000>;
+				reg = <0x80004000 0x2000>;
+				clocks = <&clks 25>;
 			};
 
 			perfmon@80006000 {
-				reg = <0x80006000 800>;
+				reg = <0x80006000 0x800>;
 				interrupts = <27>;
 				status = "disabled";
 			};
@@ -77,38 +80,51 @@
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
-				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";
+				clocks = <&clks 50>;
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
-				reg = <0x80010000 2000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80010000 0x2000>;
 				interrupts = <96 82>;
+				clocks = <&clks 46>;
 				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80012000 {
-				reg = <0x80012000 2000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80012000 0x2000>;
 				interrupts = <97 83>;
+				clocks = <&clks 47>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			ssp2: ssp@80014000 {
-				reg = <0x80014000 2000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80014000 0x2000>;
 				interrupts = <98 84>;
+				clocks = <&clks 48>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			ssp3: ssp@80016000 {
-				reg = <0x80016000 2000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80016000 0x2000>;
 				interrupts = <99 85>;
+				clocks = <&clks 49>;
 				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
 			};
@@ -117,7 +133,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-pinctrl", "simple-bus";
-				reg = <0x80018000 2000>;
+				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -410,6 +426,28 @@
 					fsl,pull-up = <1>;
 				};
 
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
+						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
+						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -453,6 +491,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -507,99 +555,148 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				usbphy0_pins_a: usbphy0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				usbphy0_pins_b: usbphy0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				usbphy1_pins_a: usbphy1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 
 			digctl@8001c000 {
-				reg = <0x8001c000 2000>;
+				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
 			};
 
 			etm@80022000 {
-				reg = <0x80022000 2000>;
+				reg = <0x80022000 0x2000>;
 				status = "disabled";
 			};
 
 			dma-apbx@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
-				reg = <0x80024000 2000>;
+				reg = <0x80024000 0x2000>;
+				clocks = <&clks 26>;
 			};
 
 			dcp@80028000 {
-				reg = <0x80028000 2000>;
+				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
 				status = "disabled";
 			};
 
 			pxp@8002a000 {
-				reg = <0x8002a000 2000>;
+				reg = <0x8002a000 0x2000>;
 				interrupts = <39>;
 				status = "disabled";
 			};
 
 			ocotp@8002c000 {
-				reg = <0x8002c000 2000>;
+				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
 
 			axi-ahb@8002e000 {
-				reg = <0x8002e000 2000>;
+				reg = <0x8002e000 0x2000>;
 				status = "disabled";
 			};
 
 			lcdif@80030000 {
 				compatible = "fsl,imx28-lcdif";
-				reg = <0x80030000 2000>;
+				reg = <0x80030000 0x2000>;
 				interrupts = <38 86>;
+				clocks = <&clks 55>;
 				status = "disabled";
 			};
 
 			can0: can@80032000 {
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80032000 2000>;
+				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
 			can1: can@80034000 {
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80034000 2000>;
+				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
 			simdbg@8003c000 {
-				reg = <0x8003c000 200>;
+				reg = <0x8003c000 0x200>;
 				status = "disabled";
 			};
 
 			simgpmisel@8003c200 {
-				reg = <0x8003c200 100>;
+				reg = <0x8003c200 0x100>;
 				status = "disabled";
 			};
 
 			simsspsel@8003c300 {
-				reg = <0x8003c300 100>;
+				reg = <0x8003c300 0x100>;
 				status = "disabled";
 			};
 
 			simmemsel@8003c400 {
-				reg = <0x8003c400 100>;
+				reg = <0x8003c400 0x100>;
 				status = "disabled";
 			};
 
 			gpiomon@8003c500 {
-				reg = <0x8003c500 100>;
+				reg = <0x8003c500 0x100>;
 				status = "disabled";
 			};
 
 			simenet@8003c700 {
-				reg = <0x8003c700 100>;
+				reg = <0x8003c700 0x100>;
 				status = "disabled";
 			};
 
 			armjtag@8003c800 {
-				reg = <0x8003c800 100>;
+				reg = <0x8003c800 0x100>;
 				status = "disabled";
 			};
                 };
@@ -611,46 +708,52 @@
 			reg = <0x80040000 0x40000>;
 			ranges;
 
-			clkctl@80040000 {
-				reg = <0x80040000 2000>;
-				status = "disabled";
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
 			};
 
 			saif0: saif@80042000 {
 				compatible = "fsl,imx28-saif";
-				reg = <0x80042000 2000>;
+				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				clocks = <&clks 53>;
 				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			power@80044000 {
-				reg = <0x80044000 2000>;
+				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
 
 			saif1: saif@80046000 {
 				compatible = "fsl,imx28-saif";
-				reg = <0x80046000 2000>;
+				reg = <0x80046000 0x2000>;
 				interrupts = <58 81>;
+				clocks = <&clks 54>;
 				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
 			lradc@80050000 {
-				reg = <0x80050000 2000>;
+				compatible = "fsl,imx28-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
 				status = "disabled";
 			};
 
 			spdif@80054000 {
-				reg = <0x80054000 2000>;
+				reg = <0x80054000 0x2000>;
 				interrupts = <45 66>;
 				status = "disabled";
 			};
 
 			rtc@80056000 {
 				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x80056000 2000>;
+				reg = <0x80056000 0x2000>;
 				interrupts = <29>;
 			};
 
@@ -658,7 +761,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
-				reg = <0x80058000 2000>;
+				reg = <0x80058000 0x2000>;
 				interrupts = <111 68>;
 				clock-frequency = <100000>;
 				status = "disabled";
@@ -668,7 +771,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
-				reg = <0x8005a000 2000>;
+				reg = <0x8005a000 0x2000>;
 				interrupts = <110 69>;
 				clock-frequency = <100000>;
 				status = "disabled";
@@ -676,21 +779,24 @@
 
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-				reg = <0x80064000 2000>;
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
 
 			timrot@80068000 {
-				reg = <0x80068000 2000>;
-				status = "disabled";
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <48 49 50 51>;
 			};
 
 			auart0: serial@8006a000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
 				interrupts = <112 70 71>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -698,6 +804,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <113 72 73>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -705,6 +812,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <114 74 75>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -712,6 +820,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
 				interrupts = <115 76 77>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -719,6 +828,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
 				interrupts = <116 78 79>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -726,18 +836,22 @@
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x80074000 0x1000>;
 				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
 				status = "disabled";
 			};
 
 			usbphy0: usbphy@8007c000 {
 				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
 				status = "disabled";
 			};
 
 			usbphy1: usbphy@8007e000 {
 				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
 				status = "disabled";
 			};
 		};
@@ -754,6 +868,7 @@
 			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80080000 0x10000>;
 			interrupts = <93>;
+			clocks = <&clks 60>;
 			fsl,usbphy = <&usbphy0>;
 			status = "disabled";
 		};
@@ -762,6 +877,7 @@
 			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80090000 0x10000>;
 			interrupts = <92>;
+			clocks = <&clks 61>;
 			fsl,usbphy = <&usbphy1>;
 			status = "disabled";
 		};
@@ -775,6 +891,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f0000 0x4000>;
 			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "disabled";
 		};
 
@@ -782,6 +900,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f4000 0x4000>;
 			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index de065b5976e6..cbd2b1c7487b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,23 +25,31 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 
 				esdhc@70008000 { /* ESDHC2 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc2_1>;
 					cd-gpios = <&gpio1 6 0>;
 					wp-gpios = <&gpio1 5 0>;
 					status = "okay";
 				};
 
 				uart3: serial@7000c000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart3_1>;
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
 
 				ecspi@70010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
 					status = "okay";
@@ -53,7 +61,7 @@
 						spi-max-frequency = <6000000>;
 						reg = <0>;
 						interrupt-parent = <&gpio1>;
-						interrupts = <8>;
+						interrupts = <8 0x4>;
 
 						regulators {
 							sw1_reg: sw1 {
@@ -169,31 +177,43 @@
 				};
 			};
 
-			wdog@73f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@73fa8000 {
-				compatible = "fsl,imx51-iomuxc-babbage";
-				reg = <0x73fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
+							697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
+							737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
+							740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
+							121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
+							402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+							405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@73fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
 			uart2: serial@73fc0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_1>;
 				status = "okay";
 			};
 		};
 
 		aips@80000000 {	/* aips-2 */
-			sdma@83fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
-			};
-
 			i2c@83fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -206,10 +226,14 @@
 			};
 
 			audmux@83fd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 				status = "okay";
 			};
 
 			ethernet@83fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "mii";
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 53cbaa3d4f90..2f71a91ca98e 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -17,6 +17,10 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
 	};
 
 	tzic: tz-interrupt-controller@e0000000 {
@@ -126,6 +130,34 @@
 				};
 			};
 
+			usb@73f80000 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80000 0x0200>;
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			usb@73f80200 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80200 0x0200>;
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			usb@73f80400 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80400 0x0200>;
+				interrupts = <16>;
+				status = "disabled";
+			};
+
+			usb@73f80600 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80600 0x0200>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@73f84000 {
 				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f84000 0x4000>;
@@ -170,7 +202,6 @@
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
-				status = "disabled";
 			};
 
 			wdog@73f9c000 { /* WDOG2 */
@@ -180,6 +211,122 @@
 				status = "disabled";
 			};
 
+			iomuxc@73fa8000 {
+				compatible = "fsl,imx51-iomuxc";
+				reg = <0x73fa8000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							384 0x80000000	/* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+							386 0x80000000	/* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+							389 0x80000000	/* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+							391 0x80000000	/* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							128 0x80000000	/* MX51_PAD_EIM_EB2__FEC_MDIO */
+							134 0x80000000	/* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+							146 0x80000000	/* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+							152 0x80000000	/* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+							158 0x80000000	/* MX51_PAD_EIM_CS4__FEC_RX_ER */
+							165 0x80000000	/* MX51_PAD_EIM_CS5__FEC_CRS */
+							206 0x80000000	/* MX51_PAD_NANDF_RB2__FEC_COL */
+							213 0x80000000	/* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+							293 0x80000000	/* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+							298 0x80000000	/* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+							225 0x80000000	/* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+							231 0x80000000	/* MX51_PAD_NANDF_CS3__FEC_MDC */
+							237 0x80000000	/* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+							243 0x80000000	/* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+							250 0x80000000	/* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+							255 0x80000000	/* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							398 0x185	/* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+							394 0x185	/* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+							409 0x185	/* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							666 0x400020d5	/* MX51_PAD_SD1_CMD__SD1_CMD */
+							669 0x20d5	/* MX51_PAD_SD1_CLK__SD1_CLK */
+							672 0x20d5	/* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+							678 0x20d5	/* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+							684 0x20d5	/* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+							691 0x20d5	/* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+						>;
+					};
+				};
+
+				esdhc2 {
+					pinctrl_esdhc2_1: esdhc2grp-1 {
+						fsl,pins = <
+							704 0x400020d5	/* MX51_PAD_SD2_CMD__SD2_CMD */
+							707 0x20d5	/* MX51_PAD_SD2_CLK__SD2_CLK */
+							710 0x20d5	/* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+							712 0x20d5	/* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+							715 0x20d5	/* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+							719 0x20d5	/* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							449 0x400001ed	/* MX51_PAD_KEY_COL4__I2C2_SCL */
+							454 0x400001ed	/* MX51_PAD_KEY_COL5__I2C2_SDA */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							413 0x1c5	/* MX51_PAD_UART1_RXD__UART1_RXD */
+							416 0x1c5	/* MX51_PAD_UART1_TXD__UART1_TXD */
+							418 0x1c5	/* MX51_PAD_UART1_RTS__UART1_RTS */
+							420 0x1c5	/* MX51_PAD_UART1_CTS__UART1_CTS */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							423 0x1c5	/* MX51_PAD_UART2_RXD__UART2_RXD */
+							426 0x1c5	/* MX51_PAD_UART2_TXD__UART2_TXD */
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							54 0x1c5	/* MX51_PAD_EIM_D25__UART3_RXD */
+							59 0x1c5	/* MX51_PAD_EIM_D26__UART3_TXD */
+							65 0x1c5	/* MX51_PAD_EIM_D27__UART3_RTS */
+							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
+						>;
+					};
+				};
+			};
+
 			uart1: serial@73fbc000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
@@ -215,6 +362,7 @@
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
 			cspi@83fc0000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 5b8eafcdbeec..4be76f223526 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -25,31 +25,66 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_2>;
 					cd-gpios = <&gpio1 1 0>;
 					wp-gpios = <&gpio1 9 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-ard";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
+							1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
+							486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
+							739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
+							218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+							226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+							233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+							241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+							429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+							435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+							441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+							448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+							456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+							464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+							471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+							477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+							492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+							500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+							508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+							516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+							524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+							532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+							540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+							548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+							637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+							642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+							647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+							652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+							657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+							662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+							667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+							611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+							616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+							607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_2>;
 				status = "okay";
 			};
 		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-		};
 	};
 
 	eim-cs1@f4000000 {
@@ -64,12 +99,32 @@
 			reg = <0xf4000000 0x2000000>;
 			phy-mode = "mii";
 			interrupt-parent = <&gpio2>;
-			interrupts = <31>;
+			interrupts = <31 0x8>;
 			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
 			smsc,irq-push-pull;
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 9c798034675e..a124d1e25258 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -25,12 +25,16 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					wp-gpios = <&gpio3 14 0>;
 					status = "okay";
 				};
 
 				ecspi@50010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 					status = "okay";
@@ -56,32 +60,45 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-evk";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				pmic: mc13892@08 {
@@ -96,6 +113,8 @@
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 2d803a9a6949..08948af86d1a 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -25,6 +25,8 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					status = "okay";
 				};
@@ -35,32 +37,46 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-qsb";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1071 0x80000000	/* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+							1141 0x80000000	/* MX53_PAD_GPIO_8__GPIO1_8 */
+							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -72,6 +88,8 @@
 			};
 
 			i2c@63fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 				status = "okay";
 
 				accelerometer: mma8450@1c {
@@ -158,10 +176,14 @@
 			};
 
 			audmux@63fd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 				status = "okay";
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 08091029168e..06c68580c842 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -25,22 +25,30 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					wp-gpios = <&gpio4 11 0>;
 					status = "okay";
 				};
 
 				esdhc@50008000 { /* ESDHC2 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc2_1>;
 					non-removable;
 					status = "okay";
 				};
 
 				uart3: serial@5000c000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart3_1>;
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
 
 				ecspi@50010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 					status = "okay";
@@ -72,35 +80,49 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					non-removable;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-smd";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+							43   0x80000000	/* MX53_PAD_KEY_ROW2__GPIO4_11 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 
 			uart2: serial@53fc0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				codec: sgtl5000@0a {
@@ -120,6 +142,8 @@
 			};
 
 			i2c@63fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 				status = "okay";
 
 				accelerometer: mma8450@1c {
@@ -139,6 +163,8 @@
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index fc79cdc4b4e6..221cf3321b0a 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -19,6 +19,13 @@
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
 	};
 
 	tzic: tz-interrupt-controller@0fffc000 {
@@ -128,6 +135,34 @@
 				};
 			};
 
+			usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				status = "disabled";
+			};
+
+			usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
@@ -172,7 +207,6 @@
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
-				status = "disabled";
 			};
 
 			wdog@53f9c000 { /* WDOG2 */
@@ -182,6 +216,161 @@
 				status = "disabled";
 			};
 
+			iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							10 0x80000000	/* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+							17 0x80000000	/* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+							23 0x80000000	/* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+							30 0x80000000	/* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							820 0x80000000	/* MX53_PAD_FEC_MDC__FEC_MDC */
+							779 0x80000000	/* MX53_PAD_FEC_MDIO__FEC_MDIO */
+							786 0x80000000	/* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+							791 0x80000000	/* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+							796 0x80000000	/* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+							799 0x80000000	/* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+							804 0x80000000	/* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+							808 0x80000000	/* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+							811 0x80000000	/* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+							816 0x80000000	/* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							433 0x80000000	/* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+							439 0x80000000	/* MX53_PAD_EIM_D17__ECSPI1_MISO */
+							445 0x80000000	/* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+						>;
+					};
+
+					pinctrl_esdhc1_2: esdhc1grp-2 {
+						fsl,pins = <
+							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+							941  0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+							948  0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+							955  0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+							962  0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+						>;
+					};
+				};
+
+				esdhc2 {
+					pinctrl_esdhc2_1: esdhc2grp-1 {
+						fsl,pins = <
+							1038 0x1d5	/* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+							1032 0x1d5	/* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+							1062 0x1d5	/* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+							1056 0x1d5	/* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+							1050 0x1d5	/* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+							1044 0x1d5	/* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+						>;
+					};
+				};
+
+				esdhc3 {
+					pinctrl_esdhc3_1: esdhc3grp-1 {
+						fsl,pins = <
+							943 0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+							950 0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+							957 0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+							964 0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+							893 0x1d5	/* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+							900 0x1d5	/* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+							906 0x1d5	/* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+							912 0x1d5	/* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+							857 0x1d5	/* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+							863 0x1d5	/* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+						>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							333 0xc0000000	/* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+							341 0xc0000000	/* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							61 0xc0000000	/* MX53_PAD_KEY_ROW3__I2C2_SDA */
+							53 0xc0000000	/* MX53_PAD_KEY_COL3__I2C2_SCL */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							346 0x1c5	/* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+							354 0x1c5	/* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+						>;
+					};
+
+					pinctrl_uart1_2: uart1grp-2 {
+						fsl,pins = <
+							828 0x1c5	/* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+							832 0x1c5	/* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							841 0x1c5	/* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+							836 0x1c5	/* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							884 0x1c5	/* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+							888 0x1c5	/* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+							875 0x1c5	/* MX53_PAD_PATA_DA_1__UART3_CTS */
+							880 0x1c5	/* MX53_PAD_PATA_DA_2__UART3_RTS */
+						>;
+					};
+				};
+			};
+
 			uart1: serial@53fbc000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fbc000 0x4000>;
@@ -196,6 +385,20 @@
 				status = "disabled";
 			};
 
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				status = "disabled";
+			};
+
 			gpio5: gpio@53fdc000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fdc000 0x4000>;
@@ -270,6 +473,7 @@
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
 			cspi@63fc0000 {
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d792581672cc..15df4c105e89 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -28,8 +28,27 @@
 			status = "disabled"; /* gpmi nand conflicts with SD */
 		};
 
+		aips-bus@02000000 { /* AIPS1 */
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+						>;
+					};
+				};
+			};
+		};
+
 		aips-bus@02100000 { /* AIPS2 */
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_2>;
 				phy-mode = "rgmii";
 				status = "okay";
 			};
@@ -52,6 +71,8 @@
 			};
 
 			uart4: serial@021f0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4_1>;
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d42e851ceb97..d152328285a1 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -46,14 +46,20 @@
 
 			iomuxc@020e0000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_gpio_hog>;
+				pinctrl-0 = <&pinctrl_hog>;
 
-				gpios {
-					pinctrl_gpio_hog: gpiohog {
+				hog {
+					pinctrl_hog: hoggrp {
 						fsl,pins = <
-							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
-							   121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
-							   >;
+							1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+							1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+							121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+							144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+							152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+							1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+							1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+							953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
+						>;
 					};
 				};
 			};
@@ -62,6 +68,9 @@
 		aips-bus@02100000 { /* AIPS2 */
 			usb@02184000 { /* USB OTG */
 				vbus-supply = <&reg_usb_otg_vbus>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usbotg_1>;
+				disable-over-current;
 				status = "okay";
 			};
 
@@ -70,12 +79,16 @@
 			};
 
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_1>;
 				phy-mode = "rgmii";
 				phy-reset-gpios = <&gpio3 23 0>;
 				status = "okay";
 			};
 
 			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_2>;
 				cd-gpios = <&gpio7 0 0>;
 				wp-gpios = <&gpio7 1 0>;
 				vmmc-supply = <&reg_3p3v>;
@@ -83,6 +96,8 @@
 			};
 
 			usdhc@0219c000 { /* uSDHC4 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc4_2>;
 				cd-gpios = <&gpio2 6 0>;
 				wp-gpios = <&gpio2 7 0>;
 				vmmc-supply = <&reg_3p3v>;
@@ -98,7 +113,7 @@
 			uart2: serial@021e8000 {
 				status = "okay";
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_serial2_1>;
+				pinctrl-0 = <&pinctrl_uart2_1>;
 			};
 
 			i2c@021a0000 { /* I2C1 */
@@ -110,6 +125,7 @@
 				codec: sgtl5000@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					clocks = <&clks 169>;
 					VDDA-supply = <&reg_2p5v>;
 					VDDIO-supply = <&reg_3p3v>;
 				};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 07509a181178..e596c28c214d 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -22,28 +22,51 @@
 	};
 
 	soc {
-
 		aips-bus@02000000 { /* AIPS1 */
 			spba-bus@02000000 {
 				uart1: serial@02020000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart1_1>;
 					status = "okay";
 				};
 			};
+
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+							1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+						>;
+					};
+				};
+			};
 		};
 
 		aips-bus@02100000 { /* AIPS2 */
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_1>;
 				phy-mode = "rgmii";
 				status = "okay";
 			};
 
 			usdhc@02194000 { /* uSDHC2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc2_1>;
 				cd-gpios = <&gpio2 2 0>;
 				wp-gpios = <&gpio2 3 0>;
 				status = "okay";
 			};
 
 			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
 				cd-gpios = <&gpio2 0 0>;
 				wp-gpios = <&gpio2 1 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 3d3c64b014e6..f3990b04fecf 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -19,6 +19,13 @@
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
 	};
 
 	cpus {
@@ -90,18 +97,23 @@
 		dma-apbh@00110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
+			clocks = <&clks 106>;
 		};
 
 		gpmi-nand@00112000 {
-		       compatible = "fsl,imx6q-gpmi-nand";
-		       #address-cells = <1>;
-		       #size-cells = <1>;
-		       reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-		       reg-names = "gpmi-nand", "bch";
-		       interrupts = <0 13 0x04>, <0 15 0x04>;
-		       interrupt-names = "gpmi-dma", "bch";
-		       fsl,gpmi-dma-channel = <0>;
-		       status = "disabled";
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 13 0x04>, <0 15 0x04>;
+			interrupt-names = "gpmi-dma", "bch";
+			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+				 <&clks 150>, <&clks 149>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			fsl,gpmi-dma-channel = <0>;
+			status = "disabled";
 		};
 
 		timer@00a00600 {
@@ -143,6 +155,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <0 31 0x04>;
+					clocks = <&clks 112>, <&clks 112>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -152,6 +166,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <0 32 0x04>;
+					clocks = <&clks 113>, <&clks 113>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -161,6 +177,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <0 33 0x04>;
+					clocks = <&clks 114>, <&clks 114>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -170,6 +188,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <0 34 0x04>;
+					clocks = <&clks 115>, <&clks 115>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -179,6 +199,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 35 0x04>;
+					clocks = <&clks 116>, <&clks 116>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -186,6 +208,8 @@
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
+					clocks = <&clks 160>, <&clks 161>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -198,6 +222,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
+					clocks = <&clks 178>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <38 37>;
 					status = "disabled";
@@ -207,6 +232,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
+					clocks = <&clks 179>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <42 41>;
 					status = "disabled";
@@ -216,6 +242,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
+					clocks = <&clks 180>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <46 45>;
 					status = "disabled";
@@ -355,24 +382,26 @@
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
-				status = "disabled";
+				clocks = <&clks 0>;
 			};
 
 			wdog@020c0000 { /* WDOG2 */
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
+				clocks = <&clks 0>;
 				status = "disabled";
 			};
 
-			ccm@020c4000 {
+			clks: ccm@020c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 0x04 0 88 0x04>;
+				#clock-cells = <1>;
 			};
 
-			anatop@020c8000 {
-				compatible = "fsl,imx6q-anatop";
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 
@@ -465,12 +494,14 @@
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
+				clocks = <&clks 182>;
 			};
 
 			usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
+				clocks = <&clks 183>;
 			};
 
 			snvs@020cc000 {
@@ -500,6 +531,11 @@
 				interrupts = <0 89 0x04 0 90 0x04>;
 			};
 
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
 			iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
@@ -507,86 +543,207 @@
 				/* shared pinctrl settings */
 				audmux {
 					pinctrl_audmux_1: audmux-1 {
-						fsl,pins = <18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
-							    1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
-							    11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
-							    3    0x80000000>;	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+						fsl,pins = <
+							18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+							1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+							11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+							3    0x80000000	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							101 0x100b1	/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+							109 0x100b1	/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+							94  0x100b1	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+						>;
+					};
+				};
+
+				enet {
+					pinctrl_enet_1: enetgrp-1 {
+						fsl,pins = <
+							695 0x1b0b0	/* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+							756 0x1b0b0	/* MX6Q_PAD_ENET_MDC__ENET_MDC */
+							24  0x1b0b0	/* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+							30  0x1b0b0	/* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+							34  0x1b0b0	/* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+							39  0x1b0b0	/* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+							44  0x1b0b0	/* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+							56  0x1b0b0	/* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+							702 0x1b0b0	/* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+							74  0x1b0b0	/* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+							52  0x1b0b0	/* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+							61  0x1b0b0	/* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+							66  0x1b0b0	/* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+							70  0x1b0b0	/* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+							48  0x1b0b0	/* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+						>;
+					};
+
+					pinctrl_enet_2: enetgrp-2 {
+						fsl,pins = <
+							890 0x1b0b0	/* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+							909 0x1b0b0	/* MX6Q_PAD_KEY_COL2__ENET_MDC */
+							24  0x1b0b0	/* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+							30  0x1b0b0	/* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+							34  0x1b0b0	/* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+							39  0x1b0b0	/* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+							44  0x1b0b0	/* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+							56  0x1b0b0	/* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+							702 0x1b0b0	/* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+							74  0x1b0b0	/* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+							52  0x1b0b0	/* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+							61  0x1b0b0	/* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+							66  0x1b0b0	/* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+							70  0x1b0b0	/* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+							48  0x1b0b0	/* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+						>;
 					};
 				};
 
 				gpmi-nand {
 					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <1328 0xb0b1		/* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
-							    1336 0xb0b1		/* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
-							    1344 0xb0b1		/* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
-							    1352 0xb000		/* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
-							    1360 0xb0b1		/* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
-							    1365 0xb0b1		/* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
-							    1371 0xb0b1		/* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
-							    1378 0xb0b1		/* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
-							    1387 0xb0b1		/* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
-							    1393 0xb0b1		/* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
-							    1397 0xb0b1		/* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
-							    1405 0xb0b1		/* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
-							    1413 0xb0b1		/* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
-							    1421 0xb0b1		/* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
-							    1429 0xb0b1		/* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
-							    1437 0xb0b1		/* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
-							    1445 0xb0b1		/* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
-							    1453 0xb0b1		/* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
-							    1463 0x00b1>;	/* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+						fsl,pins = <
+							1328 0xb0b1	/* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+							1336 0xb0b1	/* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+							1344 0xb0b1	/* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+							1352 0xb000	/* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+							1360 0xb0b1	/* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+							1365 0xb0b1	/* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+							1371 0xb0b1	/* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+							1378 0xb0b1	/* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+							1387 0xb0b1	/* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+							1393 0xb0b1	/* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+							1397 0xb0b1	/* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+							1405 0xb0b1	/* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+							1413 0xb0b1	/* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+							1421 0xb0b1	/* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+							1429 0xb0b1	/* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+							1437 0xb0b1	/* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+							1445 0xb0b1	/* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+							1453 0xb0b1	/* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+							1463 0x00b1	/* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+						>;
 					};
 				};
 
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
-							    196 0x4001b8b1>;	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+						fsl,pins = <
+							137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
+							196 0x4001b8b1	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							1140 0x1b0b1	/* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+							1148 0x1b0b1	/* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+						>;
 					};
 				};
 
-				serial2 {
-					pinctrl_serial2_1: serial2grp-1 {
-						fsl,pins = <183 0x1b0b1		/* MX6Q_PAD_EIM_D26__UART2_TXD */
-							    191 0x1b0b1>;	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							183 0x1b0b1	/* MX6Q_PAD_EIM_D26__UART2_TXD */
+							191 0x1b0b1	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+						>;
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							877 0x1b0b1	/* MX6Q_PAD_KEY_COL0__UART4_TXD */
+							885 0x1b0b1	/* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+						>;
+					};
+				};
+
+				usbotg {
+					pinctrl_usbotg_1: usbotggrp-1 {
+						fsl,pins = <
+							1592 0x17059	/* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
+						>;
+					};
+				};
+
+				usdhc2 {
+					pinctrl_usdhc2_1: usdhc2grp-1 {
+						fsl,pins = <
+							1577 0x17059	/* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+							1569 0x10059	/* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+							16   0x17059	/* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+							0    0x17059	/* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+							8    0x17059	/* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+							1583 0x17059	/* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+							1430 0x17059	/* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+							1438 0x17059	/* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+							1446 0x17059	/* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+							1454 0x17059	/* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+						>;
 					};
 				};
 
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-							    1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
-							    1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
-							    1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
-							    1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
-							    1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
-							    1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
-							    1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
-							    1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
-							    1241 0x17059>;	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+						fsl,pins = <
+							1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+							1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+							1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+							1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+							1241 0x17059	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+						>;
+					};
+
+					pinctrl_usdhc3_2: usdhc3grp-2 {
+						fsl,pins = <
+							1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+						>;
 					};
 				};
 
 				usdhc4 {
 					pinctrl_usdhc4_1: usdhc4grp-1 {
-						fsl,pins = <1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
-							    1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
-							    1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
-							    1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
-							    1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
-							    1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
-							    1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
-							    1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
-							    1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
-							    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+						fsl,pins = <
+							1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+							1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+							1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+							1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+							1517 0x17059	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+						>;
 					};
-				};
 
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <101 0x100b1		/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
-							    109 0x100b1		/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
-							    94  0x100b1>;	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+					pinctrl_usdhc4_2: usdhc4grp-2 {
+						fsl,pins = <
+							1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+						>;
 					};
 				};
 			};
@@ -605,6 +762,9 @@
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
+				clocks = <&clks 155>, <&clks 155>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
 			};
 		};
 
@@ -628,7 +788,9 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
+				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
 
@@ -636,7 +798,9 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
+				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
 
@@ -644,6 +808,8 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
 
@@ -651,13 +817,24 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
 
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks 162>;
+			};
+
 			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
+				clocks = <&clks 117>, <&clks 117>;
+				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
 
@@ -670,6 +847,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
+				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -677,6 +856,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
+				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -684,6 +865,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
+				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -691,6 +874,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
+				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -700,6 +885,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 0x04>;
+				clocks = <&clks 125>;
 				status = "disabled";
 			};
 
@@ -709,6 +895,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 0x04>;
+				clocks = <&clks 126>;
 				status = "disabled";
 			};
 
@@ -718,6 +905,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 0x04>;
+				clocks = <&clks 127>;
 				status = "disabled";
 			};
 
@@ -781,6 +969,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <0 27 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -788,6 +978,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <0 28 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -795,6 +987,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <0 29 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -802,6 +996,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <0 30 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
new file mode 100644
index 000000000000..813b91d7bea2
--- /dev/null
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -0,0 +1,76 @@
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	timer@13000000 {
+		reg = <0x13000000 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <5>;
+	};
+
+	timer@13000100 {
+		reg = <0x13000100 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <6>;
+	};
+
+	timer@13000200 {
+		reg = <0x13000200 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <7>;
+	};
+
+	pic@14000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x14000000 0x100>;
+		clear-mask = <0xffffffff>;
+	};
+
+	flash@24000000 {
+		compatible = "cfi-flash";
+		reg = <0x24000000 0x02000000>;
+	};
+
+	fpga {
+		compatible = "arm,amba-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&pic>;
+
+		/*
+		 * These PrimeCells are in the same locations and using the
+		 * same interrupts in all Integrators, however the silicon
+		 * version deployed is different.
+		 */
+		rtc@15000000 {
+			reg = <0x15000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		uart@16000000 {
+			reg = <0x16000000 0x1000>;
+			interrupts = <1>;
+		};
+
+		uart@17000000 {
+			reg = <0x17000000 0x1000>;
+			interrupts = <2>;
+		};
+
+		kmi@18000000 {
+			reg = <0x18000000 0x1000>;
+			interrupts = <3>;
+		};
+
+		kmi@19000000 {
+			reg = <0x19000000 0x1000>;
+			interrupts = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
new file mode 100644
index 000000000000..61767757b50a
--- /dev/null
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -0,0 +1,68 @@
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+		};
+
+		uart0: uart@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+		};
+
+		uart1: uart@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
new file mode 100644
index 000000000000..2dd5e4e48481
--- /dev/null
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -0,0 +1,110 @@
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/CP";
+	compatible = "arm,integrator-cp";
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,sp804", "arm,primecell";
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,sp804", "arm,primecell";
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,sp804", "arm,primecell";
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x1fc003ff>;
+	};
+
+	cic: cic@10000040 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x10000040 0x100>;
+		clear-mask = <0xffffffff>;
+		valid-mask = <0x00000007>;
+	};
+
+	sic: sic@ca000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0xca000000 0x100>;
+		clear-mask = <0x00000fff>;
+		valid-mask = <0x00000fff>;
+	};
+
+	ethernet@c8000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0xc8000000 0x10>;
+		interrupt-parent = <&pic>;
+		interrupts = <27>;
+	};
+
+	fpga {
+		/*
+		 * These PrimeCells are at the same location and using
+		 * the same interrupts in all Integrators, but in the CP
+		 * slightly newer versions are deployed.
+		 */
+		rtc@15000000 {
+			compatible = "arm,pl031", "arm,primecell";
+		};
+
+		uart@16000000 {
+			compatible = "arm,pl011", "arm,primecell";
+		};
+
+		uart@17000000 {
+			compatible = "arm,pl011", "arm,primecell";
+		};
+
+		kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+		};
+
+		kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+		};
+
+		/*
+		 * These PrimeCells are only available on the Integrator/CP
+		 */
+		mmc@1c000000 {
+			compatible = "arm,pl180", "arm,primecell";
+			reg = <0x1c000000 0x1000>;
+			interrupts = <23 24>;
+			max-frequency = <515633>;
+		};
+
+		aaci@1d000000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x1d000000 0x1000>;
+			interrupts = <25>;
+		};
+
+		clcd@c0000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <22>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 7408655f91b5..9b32d0272825 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -25,6 +25,16 @@
 		};
 	};
 
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
 	ocp@f1000000 {
 		sata@80000 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
new file mode 100644
index 000000000000..08a582414b88
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d947045106..d97cd9d4753e 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -12,7 +12,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
@@ -30,7 +30,37 @@
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0xc0000>;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			partition@100000 {
+				label = "zImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@540000 {
+				label = "initrd";
+				reg = <0x540000 0x300000>;
+			};
+
+			partition@980000 {
+				label = "boot";
+				reg = <0x980000 0x1f400000>;
+			};
+		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -41,9 +71,13 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 10 0>;
 			linux,default-trigger = "timer";
 		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 0>;
+		};
 		usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 0>;
@@ -65,4 +99,22 @@
 			gpios = <&gpio1 16 0>;
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+			debounce-interval = <100>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 000000000000..865aeec40a26
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 000000000000..75bdb93fed26
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index cef9616f330a..4e5b8154a5be 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -14,7 +14,8 @@
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
+		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -105,5 +106,14 @@
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
+
+		crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xf5000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 80f74e256408..0514fb41627e 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -26,6 +26,11 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
 		axi@d4200000 {	/* AXI */
 			compatible = "mrvl,axi-bus", "simple-bus";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 45bc4bb04e57..31f2157cd7d7 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -7,7 +7,7 @@
 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
 	interrupt-parent = <&intc>;
 
-	intc: interrupt-controller@02080000 {
+	intc: interrupt-controller@2080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
@@ -15,6 +15,23 @@
 		      < 0x02081000 0x1000 >;
 	};
 
+	timer@2000004 {
+		compatible = "qcom,msm-gpt", "qcom,msm-timer";
+		interrupts = <1 1 0x301>;
+		reg = <0x02000004 0x10>;
+		clock-frequency = <32768>;
+		cpu-offset = <0x40000>;
+	};
+
+	timer@2000024 {
+		compatible = "qcom,msm-dgt", "qcom,msm-timer";
+		interrupts = <1 0 0x301>;
+		reg = <0x02000024 0x10>,
+		      <0x02000034 0x4>;
+		clock-frequency = <6750000>;
+		cpu-offset = <0x40000>;
+	};
+
 	serial@19c400000 {
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
new file mode 100644
index 000000000000..9e621b5ad3dd
--- /dev/null
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -0,0 +1,41 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@2000000 {
+		compatible = "qcom,msm-qgic2";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x02000000 0x1000 >,
+		      < 0x02002000 0x1000 >;
+	};
+
+	timer@200a004 {
+		compatible = "qcom,msm-gpt", "qcom,msm-timer";
+		interrupts = <1 2 0x301>;
+		reg = <0x0200a004 0x10>;
+		clock-frequency = <32768>;
+		cpu-offset = <0x80000>;
+	};
+
+	timer@200a024 {
+		compatible = "qcom,msm-dgt", "qcom,msm-timer";
+		interrupts = <1 1 0x301>;
+		reg = <0x0200a024 0x10>,
+		      <0x0200a034 0x4>;
+		clock-frequency = <6750000>;
+		cpu-offset = <0x80000>;
+	};
+
+	serial@19c400000 {
+		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+		reg = <0x16440000 0x1000>,
+		      <0x16400000 0x1000>;
+		interrupts = <0 154 0x0>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 25b50b759dec..77b84e17c477 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
 
 / {
 	model = "TI OMAP2420 H4 board";
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
new file mode 100644
index 000000000000..bfd76b4a0ddc
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2420", "ti,omap2";
+
+	ocp {
+		omap2420_pmx: pinmux@48000030 {
+			compatible = "ti,omap2420-padconf", "pinctrl-single";
+			reg = <0x48000030 0x0113>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,hwmods = "mcbsp2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
new file mode 100644
index 000000000000..4565d9750f4d
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2";
+
+	ocp {
+		omap2430_pmx: pinmux@49002030 {
+			compatible = "ti,omap2430-padconf", "pinctrl-single";
+			reg = <0x49002030 0x0154>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <64>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>, /* RX interrupt */
+				     <61>; /* RX overflow interrupt */
+			interrupt-names = "common", "tx", "rx", "rx_overflow";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@4808c000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808c000 0xff>;
+			reg-names = "mpu";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@4808e000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808e000 0xff>;
+			reg-names = "mpu";
+			interrupts = <18>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <19>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index cdcb98c7e075..c38cf76df81f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -7,16 +7,44 @@
  */
 /dts-v1/;
 
-/include/ "omap3.dtsi"
+/include/ "omap36xx.dtsi"
 
 / {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
+	model = "TI OMAP3 BeagleBoard xM";
+	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
 
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
 };
 
 &i2c1 {
@@ -27,11 +55,17 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 
-		vsim: regulator@10 {
+		vsim: regulator-vsim {
 			compatible = "ti,twl4030-vsim";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
 	};
 };
 
@@ -67,3 +101,15 @@
 &mmc3 {
 	status = "disabled";
 };
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index f349ee9182ce..e8ba1c247a39 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -17,6 +17,15 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
 };
 
 &i2c1 {
@@ -46,3 +55,7 @@
 		reg = <0x5c>;
 	};
 };
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
new file mode 100644
index 000000000000..89808ce01673
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		overo {
+			label = "overo:blue:COM";
+			gpios = <&twl_gpio 19 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	bus-width = <4>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
new file mode 100644
index 000000000000..a13d12de77ff
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/include/ "omap3-overo.dtsi"
+
+/ {
+	model = "TI OMAP3 Gumstix Overo on Tobi";
+	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 810947198208..f38ea8771b44 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -17,7 +17,6 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
-		serial3 = &uart4;
 	};
 
 	cpus {
@@ -69,6 +68,24 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		omap3_pmx_core: pinmux@48002030 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002030 0x05cc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
+		omap3_pmx_wkup: pinmux@0x48002a58 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002a58 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			ti,hwmods = "gpio1";
@@ -141,12 +158,6 @@
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
 			#address-cells = <1>;
@@ -220,5 +231,74 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@49022000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49022000 0xff>,
+			      <0x49028000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>, /* RX interrupt */
+				     <4>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <1280>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@49024000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49024000 0xff>,
+			      <0x4902a000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <22>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>, /* RX interrupt */
+				     <5>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@49026000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49026000 0xff>;
+			reg-names = "mpu";
+			interrupts = <23>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <27>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
new file mode 100644
index 000000000000..96bf0287cb9f
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9880c12877b3..20b966ee1bb3 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 PandaBoard";
@@ -126,3 +127,13 @@
 	ti,non-removable;
 	bus-width = <4>;
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 72216e932fc0..94a23b39033d 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 SDP board";
@@ -18,7 +19,7 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	vdd_eth: fixedregulator@0 {
+	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
@@ -28,7 +29,7 @@
 		regulator-boot-on;
 	};
 
-	vbat: fixedregulator@2 {
+	vbat: fixedregulator-vbat {
 		compatible = "regulator-fixed";
 		regulator-name = "VBAT";
 		regulator-min-microvolt = <3750000>;
@@ -115,6 +116,33 @@
 	};
 };
 
+&omap4_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0xd8 0x118	/* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+			0xda 0		/* uart2_rts.uart2_rts OUTPUT | MODE0 */
+			0xdc 0x118	/* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+			0xde 0		/* uart2_tx.uart2_tx OUTPUT | MODE0 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x100 0x118	/* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+			0x102 0		/* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+			0x104 0x100	/* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+			0x106 0		/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			0x11c 0x100	/* uart4_rx.uart4_rx INPUT | MODE0 */
+			0x11e 0		/* uart4_tx.uart4_tx OUTPUT | MODE0 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
@@ -226,3 +254,98 @@
 	bus-width = <4>;
 	ti,non-removable;
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x00000012	/* KEY_E */
+			0x00010013	/* KEY_R */
+			0x00020014	/* KEY_T */
+			0x00030066	/* KEY_HOME */
+			0x0004003f	/* KEY_F5 */
+			0x000500f0	/* KEY_UNKNOWN */
+			0x00060017	/* KEY_I */
+			0x0007002a	/* KEY_LEFTSHIFT */
+			0x01000020	/* KEY_D*/
+			0x01010021	/* KEY_F */
+			0x01020022	/* KEY_G */
+			0x010300e7	/* KEY_SEND */
+			0x01040040	/* KEY_F6 */
+			0x010500f0	/* KEY_UNKNOWN */
+			0x01060025	/* KEY_K */
+			0x0107001c	/* KEY_ENTER */
+			0x0200002d	/* KEY_X */
+			0x0201002e	/* KEY_C */
+			0x0202002f	/* KEY_V */
+			0x0203006b	/* KEY_END */
+			0x02040041	/* KEY_F7 */
+			0x020500f0	/* KEY_UNKNOWN */
+			0x02060034	/* KEY_DOT */
+			0x0207003a	/* KEY_CAPSLOCK */
+			0x0300002c	/* KEY_Z */
+			0x0301004e	/* KEY_KPLUS */
+			0x03020030	/* KEY_B */
+			0x0303003b	/* KEY_F1 */
+			0x03040042	/* KEY_F8 */
+			0x030500f0	/* KEY_UNKNOWN */
+			0x03060018	/* KEY_O */
+			0x03070039	/* KEY_SPACE */
+			0x04000011	/* KEY_W */
+			0x04010015	/* KEY_Y */
+			0x04020016	/* KEY_U */
+			0x0403003c	/* KEY_F2 */
+			0x04040073	/* KEY_VOLUMEUP */
+			0x040500f0	/* KEY_UNKNOWN */
+			0x04060026	/* KEY_L */
+			0x04070069	/* KEY_LEFT */
+			0x0500001f	/* KEY_S */
+			0x05010023	/* KEY_H */
+			0x05020024	/* KEY_J */
+			0x0503003d	/* KEY_F3 */
+			0x05040043	/* KEY_F9 */
+			0x05050072	/* KEY_VOLUMEDOWN */
+			0x05060032	/* KEY_M */
+			0x0507006a	/* KEY_RIGHT */
+			0x06000010	/* KEY_Q */
+			0x0601001e	/* KEY_A */
+			0x06020031	/* KEY_N */
+			0x0603009e	/* KEY_BACK */
+			0x0604000e	/* KEY_BACKSPACE */
+			0x060500f0	/* KEY_UNKNOWN */
+			0x06060019	/* KEY_P */
+			0x06070067	/* KEY_UP */
+			0x07000094	/* KEY_PROG1 */
+			0x07010095	/* KEY_PROG2 */
+			0x070200ca	/* KEY_PROG3 */
+			0x070300cb	/* KEY_PROG4 */
+			0x0704003e	/* KEY_F4 */
+			0x070500f0	/* KEY_UNKNOWN */
+			0x07060160	/* KEY_OK */
+			0x0707006c>;	/* KEY_DOWN */
+	linux,input-no-autorepeat;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb6ff91..3883f94fdbd0 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -30,12 +30,35 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
 		};
 	};
 
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
+	L2: l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	local-timer@0x48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x48240600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -61,30 +84,6 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 *
-	 * MPU -+-- MPU_PRIVATE - GIC, L2
-	 *      |
-	 *      +----------------+----------+
-	 *      |                |          |
-	 *      +            +- EMIF - DDR  |
-	 *      |            |              |
-	 *      |            +     +--------+
-	 *      |            |     |
-	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
-	 *      |            |
-	 *      +- L3_MAIN --+- L4_CORE - IPs...
-	 *                   |
-	 *                   +- L4_PER - IPs...
-	 *                   |
-	 *                   +- L4_CFG -+- L4_WKUP - IPs...
-	 *                   |          |
-	 *                   |          +- IPs...
-	 *                   +- IPU ----+
-	 *                   |          |
-	 *                   +- DSP ----+
-	 *                   |          |
-	 *                   +- DSS ----+
-	 *
 	 * Since that will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
@@ -96,16 +95,27 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
-		gic: interrupt-controller@48241000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x48241000 0x1000>,
-			      <0x48240100 0x0100>;
+		omap4_pmx_core: pinmux@4a100040 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a100040 0x0196>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+		omap4_pmx_wkup: pinmux@4a31e040 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a31e040 0x0038>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
 		};
 
 		gpio1: gpio@4a310000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4a310000 0x200>;
+			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -115,6 +125,8 @@
 
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -124,6 +136,8 @@
 
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -133,6 +147,8 @@
 
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -142,6 +158,8 @@
 
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -151,6 +169,8 @@
 
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -160,30 +180,40 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -191,6 +221,8 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -198,6 +230,8 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -205,6 +239,8 @@
 
 		i2c4: i2c@48350000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48350000 0x100>;
+			interrupts = <0 62 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
@@ -212,6 +248,8 @@
 
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <0 65 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -220,6 +258,8 @@
 
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <0 66 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -228,6 +268,8 @@
 
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <0 91 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -236,6 +278,8 @@
 
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <0 48 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -244,6 +288,8 @@
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -251,30 +297,40 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 		};
 
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 		};
 
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
 
 		wdt2: wdt@4a314000 {
 			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+			reg = <0x4a314000 0x80>;
+			interrupts = <0 80 0x4>;
 			ti,hwmods = "wd_timer2";
 		};
 
@@ -282,6 +338,7 @@
 			compatible = "ti,omap4-mcpdm";
 			reg = <0x40132000 0x7f>, /* MPU private access */
 			      <0x49032000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
 			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
@@ -291,9 +348,95 @@
 			compatible = "ti,omap4-dmic";
 			reg = <0x4012e000 0x7f>, /* MPU private access */
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
 			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
+
+		mcbsp1: mcbsp@40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 17 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 22 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 23 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@48096000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x48096000 0xff>; /* L4 Interconnect */
+			reg-names = "mpu";
+			interrupts = <0 16 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		keypad: keypad@4a31c000 {
+			compatible = "ti,omap4-keypad";
+			reg = <0x4a31c000 0x80>;
+			interrupts = <0 120 0x4>;
+			reg-names = "mpu";
+			ti,hwmods = "kbd";
+		};
+
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4c000000 0x100>;
+			interrupts = <0 110 0x4>;
+			ti,hwmods = "emif1";
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4d000000 0x100>;
+			interrupts = <0 111 0x4>;
+			ti,hwmods = "emif2";
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		ocp2scp {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp_usb_phy";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 200c39ad1c82..9c41a3f311aa 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -17,4 +17,68 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* Pressure Sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/* Temperature Sensor */
+	tmp102@48{
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+	};
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x02020073	/* VOLUP */
+			0x02030072	/* VOLDOWM */
+			0x020400e7	/* SEND */
+			0x02050066	/* HOME */
+			0x0206006b	/* END */
+			0x020700d9>;	/* SEARCH */
+	linux,input-no-autorepeat;
 };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 57e527083746..5db33f481a33 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -33,9 +33,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			timer {
+				compatible = "arm,armv7-timer";
+				/* 14th PPI IRQ, active low level-sensitive */
+				interrupts = <1 14 0x308>;
+				clock-frequency = <6144000>;
+			};
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			timer {
+				compatible = "arm,armv7-timer";
+				/* 14th PPI IRQ, active low level-sensitive */
+				interrupts = <1 14 0x308>;
+				clock-frequency = <6144000>;
+			};
 		};
 	};
 
@@ -145,6 +157,41 @@
 			#interrupt-cells = <1>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		i2c4: i2c@4807A000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+		};
+
+		i2c5: i2c@4807C000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
@@ -180,5 +227,97 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+		};
+
+		keypad: keypad@4ae1c000 {
+			compatible = "ti,omap4-keypad";
+			ti,hwmods = "kbd";
+		};
+
+		mcpdm: mcpdm@40132000 {
+			compatible = "ti,omap4-mcpdm";
+			reg = <0x40132000 0x7f>, /* MPU private access */
+			      <0x49032000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 112 0x4>;
+			interrupt-parent = <&gic>;
+			ti,hwmods = "mcpdm";
+		};
+
+		dmic: dmic@4012e000 {
+			compatible = "ti,omap4-dmic";
+			reg = <0x4012e000 0x7f>, /* MPU private access */
+			      <0x4902e000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 114 0x4>;
+			interrupt-parent = <&gic>;
+			ti,hwmods = "dmic";
+		};
+
+		mcbsp1: mcbsp@40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 17 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 22 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <0 23 0x4>;
+			interrupt-names = "common";
+			interrupt-parent = <&gic>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 802ec5b2fd00..90fdbd77f274 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -135,13 +135,11 @@
 			ssp0: ssp@20084000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pl022,num-chipselects = <1>;
+				num-cs = <1>;
 				cs-gpios = <&gpio 3 5 0>;
 
 				eeprom: at25@0 {
-					pl022,hierarchy = <0>;
 					pl022,interface = <0>;
-					pl022,slave-tx-disable = <0>;
 					pl022,com-mode = <0>;
 					pl022,rx-level-trig = <1>;
 					pl022,tx-level-trig = <1>;
@@ -191,16 +189,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led0 {
-			gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */
-			linux,default-trigger = "heartbeat";
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
 			default-state = "off";
 		};
 
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
deleted file mode 100644
index 34ae3a64ba25..000000000000
--- a/arch/arm/boot/dts/prima2-cb.dts
+++ /dev/null
@@ -1,424 +0,0 @@
-/dts-v1/;
-/ {
-	model = "SiRF Prima2 eVB";
-	compatible = "sirf,prima2-cb", "sirf,prima2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
-		linux,stdout-path = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
-			reg = <0x80040000 0x1000>;
-			interrupts = <59>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0 0x40000000>;
-		};
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clock-controller@88000000 {
-				compatible = "sirf,prima2-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-			};
-
-			reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
-				interrupts = <27>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			display@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,prima2-video-codec";
-				reg = <0xa0000000 0x8000000>;
-				interrupts = <5>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
-				interrupts = <17>;
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
-				interrupts = <18>;
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
-				interrupts = <19>;
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-			};
-
-			usp2: usp@b00a0000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb00a0000 0x10000>;
-				interrupts = <22>;
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-			};
-
-			gpio: gpio-controller@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-gpio-pinmux";
-				reg = <0xb0120000 0x10000>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd4: sdhci@56400000 {
-					cell-index = <4>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56400000 0x100000>;
-					interrupts = <39>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-			};
-
-			sata@b00f0000 {
-				compatible = "synopsys,dwc-ahsata";
-				reg = <0xb8020000 0x10000>;
-				interrupts = <37>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts
new file mode 100644
index 000000000000..57286b4e7b87
--- /dev/null
+++ b/arch/arm/boot/dts/prima2-evb.dts
@@ -0,0 +1,37 @@
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+	model = "CSR SiRFprimaII Evaluation Board";
+	compatible = "sirf,prima2", "sirf,prima2-cb";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
new file mode 100644
index 000000000000..055fca542120
--- /dev/null
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -0,0 +1,640 @@
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,prima2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		l2-cache-controller@80040000 {
+			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+			reg = <0x80040000 0x1000>;
+			interrupts = <59>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0 0x40000000>;
+		};
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clock-controller@88000000 {
+				compatible = "sirf,prima2-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+			};
+
+			reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x10000>;
+				interrupts = <27>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			display@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,prima2-video-codec";
+				reg = <0xa0000000 0x8000000>;
+				interrupts = <5>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x10000>;
+				interrupts = <17>;
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x10000>;
+				interrupts = <18>;
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x10000>;
+				interrupts = <19>;
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+			};
+
+			usp2: usp@b00a0000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb00a0000 0x10000>;
+				interrupts = <22>;
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,prima2-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc4_pins_a: sdmmc4@0 {
+                                        sdmmc4 {
+                                                sirf,pins = "sdmmc4grp";
+                                                sirf,function = "sdmmc4";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+                                usp2_pins_a: usp2@0 {
+                                        usp2 {
+                                                sirf,pins = "usp2grp";
+                                                sirf,function = "usp2";
+                                        };
+                                };
+                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+                                        usb0_utmi_drvbus {
+                                                sirf,pins = "usb0_utmi_drvbusgrp";
+                                                sirf,function = "usb0_utmi_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_rst_pins_a: cko0_rst@0 {
+                                        cko0_rst {
+                                                sirf,pins = "cko0_rstgrp";
+                                                sirf,function = "cko0_rst";
+                                        };
+                                };
+                                cko1_rst_pins_a: cko1_rst@0 {
+                                        cko1_rst {
+                                                sirf,pins = "cko1_rstgrp";
+                                                sirf,function = "cko1_rst";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+				};
+
+				sd4: sdhci@56400000 {
+					cell-index = <4>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56400000 0x100000>;
+					interrupts = <39>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+			};
+
+			sata@b00f0000 {
+				compatible = "synopsys,dwc-ahsata";
+				reg = <0xb8020000 0x10000>;
+				interrupts = <37>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
new file mode 100644
index 000000000000..d7c5d721a5c7
--- /dev/null
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -0,0 +1,14 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+	model = "Marvell PXA27x familiy SoC";
+	compatible = "marvell,pxa27x";
+
+	pxabus {
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <34>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
new file mode 100644
index 000000000000..f18aad35e8b3
--- /dev/null
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -0,0 +1,132 @@
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Marvell PXA2xx family SoC";
+	compatible = "marvell,pxa2xx";
+	interrupt-parent = <&pxairq>;
+
+	aliases {
+		serial0 = &ffuart;
+		serial1 = &btuart;
+		serial2 = &stuart;
+		serial3 = &hwuart;
+		i2c0 = &pwri2c;
+		i2c1 = &pxai2c1;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,xscale";
+		};
+	};
+
+	pxabus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pxairq: interrupt-controller@40d00000 {
+			#interrupt-cells = <1>;
+			compatible = "marvell,pxa-intc";
+			interrupt-controller;
+			interrupt-parent;
+			marvell,intc-nr-irqs = <32>;
+			reg = <0x40d00000 0xd0>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "mrvl,pxa-gpio";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x40e00000 0x10000>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupts = <10>;
+			interrupt-names = "gpio_mux";
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+			ranges;
+
+			gcb0: gpio@40e00000 {
+				reg = <0x40e00000 0x4>;
+			};
+
+			gcb1: gpio@40e00004 {
+				reg = <0x40e00004 0x4>;
+			};
+
+			gcb2: gpio@40e00008 {
+				reg = <0x40e00008 0x4>;
+			};
+			gcb3: gpio@40e0000c {
+				reg = <0x40e0000c 0x4>;
+			};
+		};
+
+		ffuart: uart@40100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40100000 0x30>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		btuart: uart@40200000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40200000 0x30>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+
+		stuart: uart@40700000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40700000 0x30>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		hwuart: uart@41100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x41100000 0x30>;
+			interrupts = <7>;
+			status = "disabled";
+		};
+
+		pxai2c1: i2c@40301680 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40301680 0x30>;
+			interrupts = <18>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb0: ohci@4c000000 {
+			compatible = "mrvl,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "mrvl,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			compatible = "marvell,pxa-rtc";
+			reg = <0x40900000 0x3c>;
+			interrupts = <30 31>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
new file mode 100644
index 000000000000..f9d92da86783
--- /dev/null
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -0,0 +1,32 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+	model = "Marvell PXA3xx familiy SoC";
+	compatible = "marvell,pxa3xx";
+
+	pxabus {
+		pwri2c: i2c@40f500c0 {
+			compatible = "mrvl,pwri2c";
+			reg = <0x40f500c0 0x30>;
+			interrupts = <6>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		nand0: nand@43100000 {
+			compatible = "marvell,pxa3xx-nand";
+			reg = <0x43100000 90>;
+			interrupts = <45>;
+			#address-cells = <1>;
+			#size-cells = <1>;	
+			status = "disabled";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <56>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
index e92be5a474e7..595492aa5053 100644
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -29,6 +29,143 @@
 			};
 			twsi1: i2c@d4011000 {
 				status = "okay";
+
+				pmic: 88pm860x@34 {
+					compatible = "marvell,88pm860x";
+					reg = <0x34>;
+					interrupts = <4>;
+					interrupt-parent = <&intc>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					marvell,88pm860x-irq-read-clr;
+					marvell,88pm860x-slave-addr = <0x11>;
+
+					regulators {
+						BUCK1 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK2 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK3 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <3000000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO1 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <2800000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO2 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO3 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO4 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO5 {
+							regulator-min-microvolt = <2900000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO6 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO7 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO8 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO9 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO10 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO12 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO13 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO14 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+					rtc {
+						marvell,88pm860x-vrtc = <1>;
+					};
+					touch {
+						marvell,88pm860x-gpadc-prebias = <1>;
+						marvell,88pm860x-gpadc-slot-cycle = <1>;
+						marvell,88pm860x-tsi-prebias = <6>;
+						marvell,88pm860x-pen-prebias = <16>;
+						marvell,88pm860x-pen-prechg = <2>;
+						marvell,88pm860x-resistor-X = <300>;
+					};
+					backlights {
+						backlight-0 {
+							marvell,88pm860x-iset = <4>;
+							marvell,88pm860x-pwm = <3>;
+						};
+						backlight-2 {
+						};
+					};
+					leds {
+						led0-red {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-green {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-blue {
+							marvell,88pm860x-iset = <12>;
+						};
+					};
+				};
 			};
 			rtc: rtc@d4010000 {
 				status = "okay";
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index aebf32de73b4..825aaca33034 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -25,6 +25,11 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
 		axi@d4200000 {	/* AXI */
 			compatible = "mrvl,axi-bus", "simple-bus";
 			#address-cells = <1>;
@@ -115,6 +120,8 @@
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				mrvl,i2c-fast-mode;
@@ -123,6 +130,8 @@
 
 			twsi2: i2c@d4037000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4037000 0x1000>;
 				interrupts = <54>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 7e334d4cae21..702c0baa6004 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "db8500.dtsi"
+/include/ "dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
@@ -83,6 +83,22 @@
 	};
 
 	soc-u9500 {
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
 		external-bus@50000000 {
 			status = "okay";
 
@@ -111,7 +127,6 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-			#gpio-cells = <1>;
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 			cd-inverted;
 
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index f146dbf6f7f8..c3ef1ad26b6a 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -275,6 +275,160 @@
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo0";
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
 	};
 
 	pmc {
@@ -310,6 +464,72 @@
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 0>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 0>;
+			enable-active-high;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 0>;
+			enable-active-high;
+			/* Hack until board-harmony-pcie.c is removed */
+			status = "disabled";
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 22 0>; /* gpio PC6 */
+			enable-active-high;
+		};
+
+		regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 176 0>; /* gpio PW0 */
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-harmony",
 			     "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
new file mode 100644
index 000000000000..a2d6d6541f83
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide board";
+	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <187 0x04>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-medcom-wide",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Medcom-Wide";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 684a9e1ff7e9..ddf287f52d49 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -272,12 +272,170 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
 		adt7461@4c {
 			compatible = "adi,adt7461";
 			reg = <0x4c>;
 		};
 	};
 
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
 	usb@c5000000 {
 		status = "okay";
 	};
@@ -325,6 +483,21 @@
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		p5valw_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+5valw";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-alc5632-paz00",
 			"nvidia,tegra-audio-alc5632";
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
new file mode 100644
index 000000000000..331a3ef24d59
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux board";
+	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <187 0x04>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-plutux",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Plutux";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 85e621ab2968..e60dc7124e92 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -374,6 +374,154 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
 		temperature-sensor@4c {
 			compatible = "nct1008";
 			reg = <0x4c>;
@@ -387,6 +535,10 @@
 		};
 	};
 
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
 	memory-controller@0x7000f400 {
 		emc-table@190000 {
 			reg = <190000>;
@@ -473,6 +625,40 @@
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 0>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 0>;
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-seaboard",
 			     "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
new file mode 100644
index 000000000000..f18cec9f6a77
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,449 @@
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo0";
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
new file mode 100644
index 000000000000..9aff31b0fe4a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <187 0x04>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-tec",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design TEC";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index be90544e6b59..3e5952fcfbc5 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -289,6 +289,158 @@
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo3";
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
 	};
 
 	usb@c5000000 {
@@ -317,6 +469,60 @@
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 0>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 0>;
+			enable-active-high;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 22 0>; /* gpio PC6 */
+			enable-active-high;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 176 0>; /* gpio PW0 */
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-ventana",
 			     "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 6916310bf58f..c636d002d6d8 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -261,6 +261,286 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <0 86 0x4>;
+
+			maxim,system-power-controller;
+
+			mbatt-supply = <&usb0_vbus_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			in-v2-supply = <&mbatt_reg>;
+			in-v3-supply = <&mbatt_reg>;
+			in1-supply = <&mbatt_reg>;
+			in2-supply = <&nvvdd_sv3_reg>;
+			in3-supply = <&mbatt_reg>;
+			in4-supply = <&mbatt_reg>;
+			in5-supply = <&mbatt_reg>;
+			in6-supply = <&mbatt_reg>;
+			in7-supply = <&mbatt_reg>;
+			in8-supply = <&mbatt_reg>;
+			in9-supply = <&mbatt_reg>;
+			in10-supply = <&mbatt_reg>;
+			in11-supply = <&mbatt_reg>;
+			in12-supply = <&mbatt_reg>;
+			in13-supply = <&mbatt_reg>;
+			in14-supply = <&mbatt_reg>;
+			in15-supply = <&mbatt_reg>;
+			in16-supply = <&mbatt_reg>;
+			in17-supply = <&nvvdd_sv3_reg>;
+			in18-supply = <&nvvdd_sv3_reg>;
+			in19-supply = <&mbatt_reg>;
+			in20-supply = <&mbatt_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mbatt_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "mbatt";
+					regulator-name = "vbat_pmu";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sd1";
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sd2";
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				nvvdd_sv3_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sd3";
+					regulator-name = "nvvdd_sv3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo1";
+					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo2";
+					regulator-name = "nvvdd_ldo2,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo3";
+					regulator-name = "nvvdd_ldo3,vcom_1v8b";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo4";
+					regulator-name = "nvvdd_ldo4,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo5";
+					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo6";
+					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo7";
+					regulator-name = "nvvdd_ldo7,avddio_audio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo8";
+					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo9";
+					regulator-name = "nvvdd_ldo9,avdd_cam*";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo10";
+					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo11";
+					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@15 {
+					reg = <15>;
+					regulator-compatible = "ldo12";
+					regulator-name = "nvvdd_ldo12,vddio_sdio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@16 {
+					reg = <16>;
+					regulator-compatible = "ldo13";
+					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@17 {
+					reg = <17>;
+					regulator-compatible = "ldo14";
+					regulator-name = "nvvdd_ldo14,avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@18 {
+					reg = <18>;
+					regulator-compatible = "ldo15";
+					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@19 {
+					reg = <19>;
+					regulator-compatible = "ldo16";
+					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				regulator@20 {
+					reg = <20>;
+					regulator-compatible = "ldo17";
+					regulator-name = "nvvdd_ldo17,vddio_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@21 {
+					reg = <21>;
+					regulator-compatible = "ldo18";
+					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@22 {
+					reg = <22>;
+					regulator-compatible = "ldo19";
+					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@23 {
+					reg = <23>;
+					regulator-compatible = "ldo20";
+					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@24 {
+					reg = <24>;
+					regulator-compatible = "out5v";
+					regulator-name = "usb0_vbus_reg";
+				};
+
+				regulator@25 {
+					reg = <25>;
+					regulator-compatible = "out33v";
+					regulator-name = "pmu_out3v3";
+				};
+
+				regulator@26 {
+					reg = <26>;
+					regulator-compatible = "bbat";
+					regulator-name = "pmu_bbat";
+					regulator-min-microvolt = <2400000>;
+					regulator-max-microvolt = <2400000>;
+					regulator-always-on;
+				};
+
+				regulator@27 {
+					reg = <27>;
+					regulator-compatible = "sdby";
+					regulator-name = "vdd_aon";
+					regulator-always-on;
+				};
+
+				regulator@28 {
+					reg = <28>;
+					regulator-compatible = "vrtc";
+					regulator-name = "vrtc,pmu_vccadc";
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
 	};
 
 	usb@c5000000 {
@@ -284,6 +564,21 @@
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb0_vbus_reg: regulator {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8753-whistler",
 			     "nvidia,tegra-audio-wm8753";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 405d1673904e..67a6cd910b96 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	pwm {
+	pwm: pwm {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
new file mode 100644
index 000000000000..dd4222f00eca
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vdd_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 0>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 0>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 68 0>; /* GPIO PI4 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 63 0>; /* GPIO PH7 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 2 0>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 83 0>; /* GPIO PK3 */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
new file mode 100644
index 000000000000..0828f097ca86
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			regulator-name = "ddr";
+			reg = <100>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 0>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 0>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 238 0>; /* GPIO PDD6 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 236 0>; /* GPIO PDD4 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 8 0>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 234 0>; /* GPIO PDD2 */
+		};
+
+		vdd_bl2_reg: regulator@106 {
+			compatible = "regulator-fixed";
+			reg = <106>;
+			regulator-name = "vdd_bl2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 232 0>; /* GPIO PDD0 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts
deleted file mode 100644
index c169bced131e..000000000000
--- a/arch/arm/boot/dts/tegra30-cardhu.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra30.dtsi"
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu evaluation board";
-	compatible = "nvidia,cardhu", "nvidia,tegra30";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	pinmux {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins =	"dap2_fs_pa2",
-						"dap2_sclk_pa3",
-						"dap2_din_pa4",
-						"dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-		clock-frequency = <408000000>;
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		/* ALS and Proximity sensor */
-		isl29028@44 {
-			compatible = "isil,isl29028";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <88 0x04>; /*gpio PL0 */
-		};
-	};
-
-	i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <179 0x04>; /* gpio PW3 */
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		tps62361 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-	};
-
-	ahub {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000000 {
-		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
-		power-gpios = <&gpio 31 0>; /* gpio PD7 */
-		bus-width = <4>;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-cardhu",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Cardhu";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
new file mode 100644
index 000000000000..d10c9c5a3606
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -0,0 +1,475 @@
+/include/ "tegra30.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu evaluation board";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+		clock-frequency = <408000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* ALS and Proximity sensor */
+		isl29028@44 {
+			compatible = "isil,isl29028";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <88 0x04>; /*gpio PL0 */
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <179 0x04>; /* gpio PW3 */
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		tps62361 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <0 86 0x4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_ac_bat_reg>;
+			vcc2-supply = <&vdd_ac_bat_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_ac_bat_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_ac_bat_reg>;
+			vccio-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				vdd1_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "vdd1";
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: regulator@1 {
+					reg = <1>;
+					regulator-compatible = "vdd2";
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: regulator@2 {
+					reg = <2>;
+					regulator-compatible = "vddctrl";
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "vio";
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo6";
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	ahub {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	pmc {
+		status = "okay";
+		nvidia,invert-interrupt;
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_ac_bat_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_ac_bat";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		cam_1v8_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "cam_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&gpio 220 0>; /* gpio PBB4 */
+			vin-supply = <&vio_reg>;
+		};
+
+		cp_5v_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "cp_5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+			gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+		};
+
+		emmc_3v3_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "emmc_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 25 0>; /* gpio PD1 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		modem_3v3_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "modem_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 30 0>; /* gpio PD6 */
+		};
+
+		pex_hvdd_3v3_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "pex_hvdd_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 95 0>; /* gpio PL7 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam1_ldo_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam1_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio 142 0>; /* gpio PR6 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam2_ldo_reg: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "vdd_cam2_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio 143 0>; /* gpio PR7 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam3_ldo_reg: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "vdd_cam3_ldo";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 144 0>; /* gpio PS0 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_com_reg: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "vdd_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 24 0>; /* gpio PD0 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_fuse_3v3_reg: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "vdd_fuse_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio 94 0>; /* gpio PL6 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_pnl1_reg: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "vdd_pnl1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio 92 0>; /* gpio PL4 */
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_vid_reg: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "vddio_vid";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 152 0>; /* GPIO PT0 */
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-cardhu",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Cardhu";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 3e4334d14efb..b1497c7d7d68 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -117,7 +117,7 @@
 		status = "disabled";
 	};
 
-	pwm {
+	pwm: pwm {
 		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
new file mode 100644
index 000000000000..a63272422d76
--- /dev/null
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
new file mode 100644
index 000000000000..92693a89160e
--- /dev/null
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65910";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vrtc_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "vrtc";
+		};
+
+		vio_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "vio";
+		};
+
+		vdd1_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "vdd1";
+		};
+
+		vdd2_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "vdd2";
+		};
+
+		vdd3_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "vdd3";
+		};
+
+		vdig1_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "vdig1";
+		};
+
+		vdig2_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "vdig2";
+		};
+
+		vpll_reg: regulator@7 {
+			reg = <7>;
+			regulator-compatible = "vpll";
+		};
+
+		vdac_reg: regulator@8 {
+			reg = <8>;
+			regulator-compatible = "vdac";
+		};
+
+		vaux1_reg: regulator@9 {
+			reg = <9>;
+			regulator-compatible = "vaux1";
+		};
+
+		vaux2_reg: regulator@10 {
+			reg = <10>;
+			regulator-compatible = "vaux2";
+		};
+
+		vaux33_reg: regulator@11 {
+			reg = <11>;
+			regulator-compatible = "vaux33";
+		};
+
+		vmmc_reg: regulator@12 {
+			reg = <12>;
+			regulator-compatible = "vmmc";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 22f4d1394ed3..ff000172c93c 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -19,19 +19,19 @@
 		interrupts = <11>;
 	};
 
-	vdac: regulator@0 {
+	vdac: regulator-vdac {
 		compatible = "ti,twl4030-vdac";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vpll2: regulator@1 {
+	vpll2: regulator-vpll2 {
 		compatible = "ti,twl4030-vpll2";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vmmc1: regulator@2 {
+	vmmc1: regulator-vmmc1 {
 		compatible = "ti,twl4030-vmmc1";
 		regulator-min-microvolt = <1850000>;
 		regulator-max-microvolt = <3150000>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f3510d7eb..123e2c40218a 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -20,67 +20,70 @@
 		interrupts = <11>;
 	};
 
-	vaux1: regulator@0 {
+	vaux1: regulator-vaux1 {
 		compatible = "ti,twl6030-vaux1";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <3000000>;
 	};
 
-	vaux2: regulator@1 {
+	vaux2: regulator-vaux2 {
 		compatible = "ti,twl6030-vaux2";
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <2800000>;
 	};
 
-	vaux3: regulator@2 {
+	vaux3: regulator-vaux3 {
 		compatible = "ti,twl6030-vaux3";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <3000000>;
 	};
 
-	vmmc: regulator@3 {
+	vmmc: regulator-vmmc {
 		compatible = "ti,twl6030-vmmc";
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <3000000>;
 	};
 
-	vpp: regulator@4 {
+	vpp: regulator-vpp {
 		compatible = "ti,twl6030-vpp";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <2500000>;
 	};
 
-	vusim: regulator@5 {
+	vusim: regulator-vusim {
 		compatible = "ti,twl6030-vusim";
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <2900000>;
 	};
 
-	vdac: regulator@6 {
+	vdac: regulator-vdac {
 		compatible = "ti,twl6030-vdac";
 	};
 
-	vana: regulator@7 {
+	vana: regulator-vana {
 		compatible = "ti,twl6030-vana";
 	};
 
-	vcxio: regulator@8 {
+	vcxio: regulator-vcxio {
 		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
 	};
 
-	vusb: regulator@9 {
+	vusb: regulator-vusb {
 		compatible = "ti,twl6030-vusb";
 	};
 
-	v1v8: regulator@10 {
+	v1v8: regulator-v1v8 {
 		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
 	};
 
-	v2v1: regulator@11 {
+	v2v1: regulator-v2v1 {
 		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
 	};
 
-	clk32kg: regulator@12 {
+	clk32kg: regulator-clk32kg {
 		compatible = "ti,twl6030-clk32kg";
 	};
 };
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
new file mode 100644
index 000000000000..567cf4e8ab84
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -0,0 +1,36 @@
+/*
+ * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "vt8500.dtsi"
+
+/ {
+	model = "Benign BV07 Netbook";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display@0 {
+		modes {
+			mode0: mode@0 {
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock = <0>;	/* unused but required */
+				bpp = <16>;	/* non-standard but required */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
new file mode 100644
index 000000000000..d8645e990b21
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -0,0 +1,116 @@
+/*
+ * vt8500.dtsi - Device tree file for VIA VT8500 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "via,vt8500";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		intc: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "via,vt8500-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d800e400 {
+			compatible = "via,vt8500-fb";
+			reg = <0xd800e400 0x400>;
+			interrupts = <12>;
+			display = <&display>;
+			default-mode = <&mode0>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
new file mode 100644
index 000000000000..fd4e248074c6
--- /dev/null
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -0,0 +1,36 @@
+/*
+ * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8505.dtsi"
+
+/ {
+	model = "Wondermedia WM8505 Netbook";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display@0 {
+		modes {
+			mode0: mode@0 {
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock = <0>;	/* unused but required */
+				bpp = <32>;	/* non-standard but required */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
new file mode 100644
index 000000000000..b459691655ab
--- /dev/null
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -0,0 +1,143 @@
+/*
+ * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8505";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "wm,wm8505-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007100 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007100 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007300 {
+			compatible = "platform-uhci";
+			reg = <0xd8007300 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+			display = <&display>;
+			default-mode = <&mode0>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8370000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8370000 0x1040>;
+			interrupts = <31>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8380000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8380000 0x1040>;
+			interrupts = <30>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
new file mode 100644
index 000000000000..cefd938f842f
--- /dev/null
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -0,0 +1,36 @@
+/*
+ * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8650.dtsi"
+
+/ {
+	model = "Wondermedia WM8650-MID Tablet";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display@0 {
+		modes {
+			mode0: mode@0 {
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock = <0>;	/* unused but required */
+				bpp = <16>;	/* non-standard but required */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
new file mode 100644
index 000000000000..83b9467559bb
--- /dev/null
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -0,0 +1,147 @@
+/*
+ * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8650";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "wm,wm8650-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				arm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				sdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+			display = <&display>;
+			default-mode = <&mode0>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts
new file mode 100644
index 000000000000..ec3f9528e180
--- /dev/null
+++ b/arch/arm/boot/dts/xenvm-4.2.dts
@@ -0,0 +1,68 @@
+/*
+ * Xen Virtual Machine for unprivileged guests
+ *
+ * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "XENVM-4.2";
+	compatible = "xen,xenvm-4.2", "xen,xenvm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		/* this field is going to be adjusted by the hypervisor */
+		bootargs = "console=hvc0 root=/dev/xvda";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0x80000000 0 0x08000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x100>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	hypervisor {
+		compatible = "xen,xen-4.2", "xen,xen";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0xb0000000 0 0x20000>;
+		/* this field is going to be adjusted by the hypervisor */
+		interrupts = <1 15 0xf08>;
+	};
+
+	motherboard {
+		arm,v2m-memory-map = "rs1";
+	};
+};
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 2afdf67c2127..c285a9d777d9 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_ATMEL_SSC=y
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 7d8718468e0d..f78d259f8d23 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y
@@ -85,6 +85,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_HWMON is not set
 CONFIG_MEDIA_SUPPORT=y
@@ -120,6 +121,8 @@ CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S35390A=y
 CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_UIO=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index d54e2acd3ab1..4ae57a34a582 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=y
+CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig
index ade6b2f23116..1e8712ef062e 100644
--- a/arch/arm/configs/at91sam9261_defconfig
+++ b/arch/arm/configs/at91sam9261_defconfig
@@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index 1cf96264cba1..d2050cada82d 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
@@ -138,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=y
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 994d331b2319..e1b0e80b54a5 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index ad562ee64209..7cf87856d63c 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
new file mode 100644
index 000000000000..7aea70253c63
--- /dev/null
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_BCM2835=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_CLEANCACHE=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_SCHED_TRACER=y
+CONFIG_STACK_TRACER=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+CONFIG_TEST_KSTRTOX=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
deleted file mode 100644
index 9e6a8fe13164..000000000000
--- a/arch/arm/configs/bcmring_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-CONFIG_PERF_EVENTS=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_BCMRING=y
-CONFIG_BCM_ZRELADDR=0x8000
-CONFIG_CPU_32v6K=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0e000000
-CONFIG_ZBOOT_ROM_BSS=0x0ea00000
-CONFIG_ZBOOT_ROM=y
-CONFIG_NET=y
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_BCM_UMI=y
-CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_HEADERS_CHECK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index bbf729e2fb6f..921480c23b98 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index e7d7942927f3..ea116cbdffa1 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f725b9637b33..66aa7a6db884 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,9 +32,7 @@ CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_SMP=y
@@ -42,7 +40,6 @@ CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_VFP=y
 CONFIG_NEON=y
@@ -179,6 +176,9 @@ CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MXS_PHY=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
@@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
 CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index aeb3af541fed..74eee0c78f28 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,5 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -15,9 +17,19 @@ CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_ESATA_SHEEVAPLUG=y
 CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_DREAMPLUG_DT=y
+CONFIG_MACH_ICONNECT_DT=y
+CONFIG_MACH_DLINK_KIRKWOOD_DT=y
+CONFIG_MACH_IB62X0_DT=y
+CONFIG_MACH_TS219_DT=y
+CONFIG_MACH_DOCKSTAR_DT=y
+CONFIG_MACH_GOFLEXNET_DT=y
+CONFIG_MACH_LSXL_DT=y
+CONFIG_MACH_IOMEGA_IX2_200_DT=y
+CONFIG_MACH_KM_KIRKWOOD_DT=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
+CONFIG_MACH_DOCKSTAR=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_OPENRD_ULTIMATE=y
@@ -29,8 +41,6 @@ CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
 CONFIG_MACH_T5325=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -47,13 +57,11 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -69,7 +77,6 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -78,22 +85,21 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_NET_PCI=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
+CONFIG_MARVELL_PHY=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
@@ -103,7 +109,8 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -119,10 +126,8 @@ CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_PRINTER=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -148,7 +153,6 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -158,7 +162,6 @@ CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
@@ -171,11 +174,8 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
index 26146ffea1a5..8c49df66cac3 100644
--- a/arch/arm/configs/kzm9d_defconfig
+++ b/arch/arm/configs/kzm9d_defconfig
@@ -8,6 +8,7 @@ CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 2388c8610627..c88b57886e79 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -14,6 +14,7 @@ CONFIG_NAMESPACES=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -22,7 +23,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_ARCH_SH73A0=y
 CONFIG_MACH_KZM9G=y
 CONFIG_MEMORY_START=0x41000000
@@ -70,6 +70,7 @@ CONFIG_INPUT_SPARSEKMAP=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ST1232=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index e42a0e3d4c3a..92386b20bd09 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -133,7 +133,6 @@ CONFIG_SND_DEBUG_VERBOSE=y
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
@@ -149,6 +148,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_PCA9532=y
 CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -161,10 +161,13 @@ CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_LPC32XX=y
 CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 CONFIG_STAGING=y
 CONFIG_LPC32XX_ADC=y
-CONFIG_MAX517=y
 CONFIG_IIO=y
+CONFIG_MAX517=y
+CONFIG_PWM=y
+CONFIG_PWM_LPC32XX=y
 CONFIG_EXT2_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 864f9a5c39dd..53382b6c8bb4 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -1,13 +1,14 @@
 # CONFIG_ARM_PATCH_PHYS_VIRT is not set
 CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZMA=y
+CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_MACH_MARZEN=y
@@ -21,7 +22,6 @@ CONFIG_ARM_ERRATA_458693=y
 CONFIG_ARM_ERRATA_460075=y
 CONFIG_ARM_ERRATA_743622=y
 CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
 CONFIG_SMP=y
 # CONFIG_ARM_CPU_TOPOLOGY is not set
 CONFIG_AEABI=y
@@ -29,13 +29,16 @@ CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -68,17 +71,21 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
 CONFIG_SSB=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_REDUCED=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 5a584520db2f..f1cb95e58af0 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -16,7 +16,7 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -90,6 +90,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_MMP_UART3=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
new file mode 100644
index 000000000000..159f75fc4377
--- /dev/null
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_SOCFPGA=y
+# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_ATA=y
+CONFIG_SATA_HIGHBANK=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_SI=y
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_HIGHBANK_MC=y
+CONFIG_EDAC_HIGHBANK_L2=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 2e86b31c33cf..7bcf850eddcd 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ccdb6357fb74..048aaca60814 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -23,18 +23,11 @@ CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
 CONFIG_MACH_MXS_DT=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-CONFIG_MACH_APX4DEVKIT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
@@ -60,6 +53,9 @@ CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_NETDEVICES=y
@@ -89,13 +85,13 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
+CONFIG_SPI_MXS=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 # CONFIG_MFD_SUPPORT is not set
 CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
@@ -110,14 +106,45 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 CONFIG_SND_SOC_SGTL5000=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_STMP=y
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
 CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_FSCACHE=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index e58edc36b406..62303043db9c 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_TWL4030=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
deleted file mode 100644
index 35a31ccacc32..000000000000
--- a/arch/arm/configs/pnx4008_defconfig
+++ /dev/null
@@ -1,472 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PNX4008=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
index c328ac65479a..807d4e2acb17 100644
--- a/arch/arm/configs/prima2_defconfig
+++ b/arch/arm/configs/prima2_defconfig
@@ -1,4 +1,6 @@
 CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
@@ -8,9 +10,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_ARCH_PRIMA2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_SIRF=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_KEXEC=y
@@ -36,7 +36,6 @@ CONFIG_SPI=y
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_MASS_STORAGE=m
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 1cd381e1d47d..191118caa5c0 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -17,7 +17,7 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -66,5 +66,7 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_MMP_UART2=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 9160f3b7751f..42d5db1876ab 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
@@ -87,7 +86,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index ba6a515086b5..3a186d653dac 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -9,11 +9,14 @@ CONFIG_ARCH_S3C64XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_MACH_SMDK6400=y
 CONFIG_MACH_ANW6410=y
+CONFIG_MACH_MINI6410=y
+CONFIG_MACH_REAL6410=y
 CONFIG_MACH_SMDK6410=y
 CONFIG_MACH_NCP=y
 CONFIG_MACH_HMT=y
 CONFIG_MACH_SMARTQ5=y
 CONFIG_MACH_SMARTQ7=y
+CONFIG_MACH_WLF_CRAGG_6410=y
 CONFIG_CPU_32v6K=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index ecf2531523a1..b4384af1bea6 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -39,7 +39,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_RESERVE=3
+CONFIG_MTD_UBI_BEB_LIMIT=25
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index d5e260b8b160..52f1488591c7 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -100,7 +100,6 @@ CONFIG_USB_ETH=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 1d24f8458bef..71277a1591ba 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_BUG is not set
+# CONFIG_BUGVERBOSE is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_SHMEM is not set
 CONFIG_SLOB=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index db2245353f0f..e2184f6c20b3 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -24,11 +24,11 @@ CONFIG_EFI_PARTITION=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_TEGRA=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_MACH_HARMONY=y
-CONFIG_MACH_PAZ00=y
-CONFIG_MACH_TRIMSLICE=y
+CONFIG_TEGRA_PCI=y
+CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
@@ -67,7 +67,18 @@ CONFIG_INET6_IPCOMP=y
 CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
-# CONFIG_WIRELESS is not set
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIBTUSB=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -87,7 +98,8 @@ CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_WLAN is not set
+CONFIG_RT2X00=y
+CONFIG_RT2800USB=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
@@ -105,25 +117,31 @@ CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA=y
-CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_TPS6586X=y
+CONFIG_GPIO_TPS65910=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
+CONFIG_MFD_MAX8907=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
@@ -136,15 +154,29 @@ CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_ACM=y
+CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_TPS65910=y
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_TEGRA=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
@@ -152,10 +184,14 @@ CONFIG_SENSORS_AK8975=y
 CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
+CONFIG_NVEC_POWER=y
+CONFIG_NVEC_PAZ00=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_TEGRA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -168,6 +204,7 @@ CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
@@ -186,8 +223,6 @@ CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_TWOFISH=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_TEGRA_AES=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d4f661d1cf6..da6845493caa 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 2e39f38b9627..a1501e1e1a90 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
new file mode 100644
index 000000000000..a2c83851bc90
--- /dev/null
+++ b/arch/arm/crypto/Makefile
@@ -0,0 +1,9 @@
+#
+# Arch-specific CryptoAPI modules.
+#
+
+obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
+obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
+
+aes-arm-y  := aes-armv4.o aes_glue.o
+sha1-arm-y := sha1-armv4-large.o sha1_glue.o
diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S
new file mode 100644
index 000000000000..e59b1d505d6c
--- /dev/null
+++ b/arch/arm/crypto/aes-armv4.S
@@ -0,0 +1,1112 @@
+#define __ARM_ARCH__ __LINUX_ARM_ARCH__
+@ ====================================================================
+@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see http://www.openssl.org/~appro/cryptogams/.
+@ ====================================================================
+
+@ AES for ARMv4
+
+@ January 2007.
+@
+@ Code uses single 1K S-box and is >2 times faster than code generated
+@ by gcc-3.4.1. This is thanks to unique feature of ARMv4 ISA, which
+@ allows to merge logical or arithmetic operation with shift or rotate
+@ in one instruction and emit combined result every cycle. The module
+@ is endian-neutral. The performance is ~42 cycles/byte for 128-bit
+@ key [on single-issue Xscale PXA250 core].
+
+@ May 2007.
+@
+@ AES_set_[en|de]crypt_key is added.
+
+@ July 2010.
+@
+@ Rescheduling for dual-issue pipeline resulted in 12% improvement on
+@ Cortex A8 core and ~25 cycles per byte processed with 128-bit key.
+
+@ February 2011.
+@
+@ Profiler-assisted and platform-specific optimization resulted in 16%
+@ improvement on Cortex A8 core and ~21.5 cycles per byte.
+
+@ A little glue here to select the correct code below for the ARM CPU
+@ that is being targetted.
+
+.text
+.code	32
+
+.type	AES_Te,%object
+.align	5
+AES_Te:
+.word	0xc66363a5, 0xf87c7c84, 0xee777799, 0xf67b7b8d
+.word	0xfff2f20d, 0xd66b6bbd, 0xde6f6fb1, 0x91c5c554
+.word	0x60303050, 0x02010103, 0xce6767a9, 0x562b2b7d
+.word	0xe7fefe19, 0xb5d7d762, 0x4dababe6, 0xec76769a
+.word	0x8fcaca45, 0x1f82829d, 0x89c9c940, 0xfa7d7d87
+.word	0xeffafa15, 0xb25959eb, 0x8e4747c9, 0xfbf0f00b
+.word	0x41adadec, 0xb3d4d467, 0x5fa2a2fd, 0x45afafea
+.word	0x239c9cbf, 0x53a4a4f7, 0xe4727296, 0x9bc0c05b
+.word	0x75b7b7c2, 0xe1fdfd1c, 0x3d9393ae, 0x4c26266a
+.word	0x6c36365a, 0x7e3f3f41, 0xf5f7f702, 0x83cccc4f
+.word	0x6834345c, 0x51a5a5f4, 0xd1e5e534, 0xf9f1f108
+.word	0xe2717193, 0xabd8d873, 0x62313153, 0x2a15153f
+.word	0x0804040c, 0x95c7c752, 0x46232365, 0x9dc3c35e
+.word	0x30181828, 0x379696a1, 0x0a05050f, 0x2f9a9ab5
+.word	0x0e070709, 0x24121236, 0x1b80809b, 0xdfe2e23d
+.word	0xcdebeb26, 0x4e272769, 0x7fb2b2cd, 0xea75759f
+.word	0x1209091b, 0x1d83839e, 0x582c2c74, 0x341a1a2e
+.word	0x361b1b2d, 0xdc6e6eb2, 0xb45a5aee, 0x5ba0a0fb
+.word	0xa45252f6, 0x763b3b4d, 0xb7d6d661, 0x7db3b3ce
+.word	0x5229297b, 0xdde3e33e, 0x5e2f2f71, 0x13848497
+.word	0xa65353f5, 0xb9d1d168, 0x00000000, 0xc1eded2c
+.word	0x40202060, 0xe3fcfc1f, 0x79b1b1c8, 0xb65b5bed
+.word	0xd46a6abe, 0x8dcbcb46, 0x67bebed9, 0x7239394b
+.word	0x944a4ade, 0x984c4cd4, 0xb05858e8, 0x85cfcf4a
+.word	0xbbd0d06b, 0xc5efef2a, 0x4faaaae5, 0xedfbfb16
+.word	0x864343c5, 0x9a4d4dd7, 0x66333355, 0x11858594
+.word	0x8a4545cf, 0xe9f9f910, 0x04020206, 0xfe7f7f81
+.word	0xa05050f0, 0x783c3c44, 0x259f9fba, 0x4ba8a8e3
+.word	0xa25151f3, 0x5da3a3fe, 0x804040c0, 0x058f8f8a
+.word	0x3f9292ad, 0x219d9dbc, 0x70383848, 0xf1f5f504
+.word	0x63bcbcdf, 0x77b6b6c1, 0xafdada75, 0x42212163
+.word	0x20101030, 0xe5ffff1a, 0xfdf3f30e, 0xbfd2d26d
+.word	0x81cdcd4c, 0x180c0c14, 0x26131335, 0xc3ecec2f
+.word	0xbe5f5fe1, 0x359797a2, 0x884444cc, 0x2e171739
+.word	0x93c4c457, 0x55a7a7f2, 0xfc7e7e82, 0x7a3d3d47
+.word	0xc86464ac, 0xba5d5de7, 0x3219192b, 0xe6737395
+.word	0xc06060a0, 0x19818198, 0x9e4f4fd1, 0xa3dcdc7f
+.word	0x44222266, 0x542a2a7e, 0x3b9090ab, 0x0b888883
+.word	0x8c4646ca, 0xc7eeee29, 0x6bb8b8d3, 0x2814143c
+.word	0xa7dede79, 0xbc5e5ee2, 0x160b0b1d, 0xaddbdb76
+.word	0xdbe0e03b, 0x64323256, 0x743a3a4e, 0x140a0a1e
+.word	0x924949db, 0x0c06060a, 0x4824246c, 0xb85c5ce4
+.word	0x9fc2c25d, 0xbdd3d36e, 0x43acacef, 0xc46262a6
+.word	0x399191a8, 0x319595a4, 0xd3e4e437, 0xf279798b
+.word	0xd5e7e732, 0x8bc8c843, 0x6e373759, 0xda6d6db7
+.word	0x018d8d8c, 0xb1d5d564, 0x9c4e4ed2, 0x49a9a9e0
+.word	0xd86c6cb4, 0xac5656fa, 0xf3f4f407, 0xcfeaea25
+.word	0xca6565af, 0xf47a7a8e, 0x47aeaee9, 0x10080818
+.word	0x6fbabad5, 0xf0787888, 0x4a25256f, 0x5c2e2e72
+.word	0x381c1c24, 0x57a6a6f1, 0x73b4b4c7, 0x97c6c651
+.word	0xcbe8e823, 0xa1dddd7c, 0xe874749c, 0x3e1f1f21
+.word	0x964b4bdd, 0x61bdbddc, 0x0d8b8b86, 0x0f8a8a85
+.word	0xe0707090, 0x7c3e3e42, 0x71b5b5c4, 0xcc6666aa
+.word	0x904848d8, 0x06030305, 0xf7f6f601, 0x1c0e0e12
+.word	0xc26161a3, 0x6a35355f, 0xae5757f9, 0x69b9b9d0
+.word	0x17868691, 0x99c1c158, 0x3a1d1d27, 0x279e9eb9
+.word	0xd9e1e138, 0xebf8f813, 0x2b9898b3, 0x22111133
+.word	0xd26969bb, 0xa9d9d970, 0x078e8e89, 0x339494a7
+.word	0x2d9b9bb6, 0x3c1e1e22, 0x15878792, 0xc9e9e920
+.word	0x87cece49, 0xaa5555ff, 0x50282878, 0xa5dfdf7a
+.word	0x038c8c8f, 0x59a1a1f8, 0x09898980, 0x1a0d0d17
+.word	0x65bfbfda, 0xd7e6e631, 0x844242c6, 0xd06868b8
+.word	0x824141c3, 0x299999b0, 0x5a2d2d77, 0x1e0f0f11
+.word	0x7bb0b0cb, 0xa85454fc, 0x6dbbbbd6, 0x2c16163a
+@ Te4[256]
+.byte	0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5
+.byte	0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76
+.byte	0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0
+.byte	0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0
+.byte	0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc
+.byte	0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15
+.byte	0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a
+.byte	0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75
+.byte	0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0
+.byte	0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84
+.byte	0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b
+.byte	0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf
+.byte	0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85
+.byte	0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8
+.byte	0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5
+.byte	0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2
+.byte	0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17
+.byte	0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73
+.byte	0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88
+.byte	0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb
+.byte	0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c
+.byte	0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79
+.byte	0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9
+.byte	0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08
+.byte	0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6
+.byte	0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a
+.byte	0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e
+.byte	0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e
+.byte	0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94
+.byte	0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf
+.byte	0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68
+.byte	0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
+@ rcon[]
+.word	0x01000000, 0x02000000, 0x04000000, 0x08000000
+.word	0x10000000, 0x20000000, 0x40000000, 0x80000000
+.word	0x1B000000, 0x36000000, 0, 0, 0, 0, 0, 0
+.size	AES_Te,.-AES_Te
+
+@ void AES_encrypt(const unsigned char *in, unsigned char *out,
+@ 		 const AES_KEY *key) {
+.global AES_encrypt
+.type   AES_encrypt,%function
+.align	5
+AES_encrypt:
+	sub	r3,pc,#8		@ AES_encrypt
+	stmdb   sp!,{r1,r4-r12,lr}
+	mov	r12,r0		@ inp
+	mov	r11,r2
+	sub	r10,r3,#AES_encrypt-AES_Te	@ Te
+#if __ARM_ARCH__<7
+	ldrb	r0,[r12,#3]	@ load input data in endian-neutral
+	ldrb	r4,[r12,#2]	@ manner...
+	ldrb	r5,[r12,#1]
+	ldrb	r6,[r12,#0]
+	orr	r0,r0,r4,lsl#8
+	ldrb	r1,[r12,#7]
+	orr	r0,r0,r5,lsl#16
+	ldrb	r4,[r12,#6]
+	orr	r0,r0,r6,lsl#24
+	ldrb	r5,[r12,#5]
+	ldrb	r6,[r12,#4]
+	orr	r1,r1,r4,lsl#8
+	ldrb	r2,[r12,#11]
+	orr	r1,r1,r5,lsl#16
+	ldrb	r4,[r12,#10]
+	orr	r1,r1,r6,lsl#24
+	ldrb	r5,[r12,#9]
+	ldrb	r6,[r12,#8]
+	orr	r2,r2,r4,lsl#8
+	ldrb	r3,[r12,#15]
+	orr	r2,r2,r5,lsl#16
+	ldrb	r4,[r12,#14]
+	orr	r2,r2,r6,lsl#24
+	ldrb	r5,[r12,#13]
+	ldrb	r6,[r12,#12]
+	orr	r3,r3,r4,lsl#8
+	orr	r3,r3,r5,lsl#16
+	orr	r3,r3,r6,lsl#24
+#else
+	ldr	r0,[r12,#0]
+	ldr	r1,[r12,#4]
+	ldr	r2,[r12,#8]
+	ldr	r3,[r12,#12]
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+#endif
+	bl	_armv4_AES_encrypt
+
+	ldr	r12,[sp],#4		@ pop out
+#if __ARM_ARCH__>=7
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+	str	r0,[r12,#0]
+	str	r1,[r12,#4]
+	str	r2,[r12,#8]
+	str	r3,[r12,#12]
+#else
+	mov	r4,r0,lsr#24		@ write output in endian-neutral
+	mov	r5,r0,lsr#16		@ manner...
+	mov	r6,r0,lsr#8
+	strb	r4,[r12,#0]
+	strb	r5,[r12,#1]
+	mov	r4,r1,lsr#24
+	strb	r6,[r12,#2]
+	mov	r5,r1,lsr#16
+	strb	r0,[r12,#3]
+	mov	r6,r1,lsr#8
+	strb	r4,[r12,#4]
+	strb	r5,[r12,#5]
+	mov	r4,r2,lsr#24
+	strb	r6,[r12,#6]
+	mov	r5,r2,lsr#16
+	strb	r1,[r12,#7]
+	mov	r6,r2,lsr#8
+	strb	r4,[r12,#8]
+	strb	r5,[r12,#9]
+	mov	r4,r3,lsr#24
+	strb	r6,[r12,#10]
+	mov	r5,r3,lsr#16
+	strb	r2,[r12,#11]
+	mov	r6,r3,lsr#8
+	strb	r4,[r12,#12]
+	strb	r5,[r12,#13]
+	strb	r6,[r12,#14]
+	strb	r3,[r12,#15]
+#endif
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia   sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.size	AES_encrypt,.-AES_encrypt
+
+.type   _armv4_AES_encrypt,%function
+.align	2
+_armv4_AES_encrypt:
+	str	lr,[sp,#-4]!		@ push lr
+	ldmia	r11!,{r4-r7}
+	eor	r0,r0,r4
+	ldr	r12,[r11,#240-16]
+	eor	r1,r1,r5
+	eor	r2,r2,r6
+	eor	r3,r3,r7
+	sub	r12,r12,#1
+	mov	lr,#255
+
+	and	r7,lr,r0
+	and	r8,lr,r0,lsr#8
+	and	r9,lr,r0,lsr#16
+	mov	r0,r0,lsr#24
+.Lenc_loop:
+	ldr	r4,[r10,r7,lsl#2]	@ Te3[s0>>0]
+	and	r7,lr,r1,lsr#16	@ i0
+	ldr	r5,[r10,r8,lsl#2]	@ Te2[s0>>8]
+	and	r8,lr,r1
+	ldr	r6,[r10,r9,lsl#2]	@ Te1[s0>>16]
+	and	r9,lr,r1,lsr#8
+	ldr	r0,[r10,r0,lsl#2]	@ Te0[s0>>24]
+	mov	r1,r1,lsr#24
+
+	ldr	r7,[r10,r7,lsl#2]	@ Te1[s1>>16]
+	ldr	r8,[r10,r8,lsl#2]	@ Te3[s1>>0]
+	ldr	r9,[r10,r9,lsl#2]	@ Te2[s1>>8]
+	eor	r0,r0,r7,ror#8
+	ldr	r1,[r10,r1,lsl#2]	@ Te0[s1>>24]
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r5,r8,ror#8
+	and	r8,lr,r2,lsr#16	@ i1
+	eor	r6,r6,r9,ror#8
+	and	r9,lr,r2
+	ldr	r7,[r10,r7,lsl#2]	@ Te2[s2>>8]
+	eor	r1,r1,r4,ror#24
+	ldr	r8,[r10,r8,lsl#2]	@ Te1[s2>>16]
+	mov	r2,r2,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Te3[s2>>0]
+	eor	r0,r0,r7,ror#16
+	ldr	r2,[r10,r2,lsl#2]	@ Te0[s2>>24]
+	and	r7,lr,r3		@ i0
+	eor	r1,r1,r8,ror#8
+	and	r8,lr,r3,lsr#8	@ i1
+	eor	r6,r6,r9,ror#16
+	and	r9,lr,r3,lsr#16	@ i2
+	ldr	r7,[r10,r7,lsl#2]	@ Te3[s3>>0]
+	eor	r2,r2,r5,ror#16
+	ldr	r8,[r10,r8,lsl#2]	@ Te2[s3>>8]
+	mov	r3,r3,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Te1[s3>>16]
+	eor	r0,r0,r7,ror#24
+	ldr	r7,[r11],#16
+	eor	r1,r1,r8,ror#16
+	ldr	r3,[r10,r3,lsl#2]	@ Te0[s3>>24]
+	eor	r2,r2,r9,ror#8
+	ldr	r4,[r11,#-12]
+	eor	r3,r3,r6,ror#8
+
+	ldr	r5,[r11,#-8]
+	eor	r0,r0,r7
+	ldr	r6,[r11,#-4]
+	and	r7,lr,r0
+	eor	r1,r1,r4
+	and	r8,lr,r0,lsr#8
+	eor	r2,r2,r5
+	and	r9,lr,r0,lsr#16
+	eor	r3,r3,r6
+	mov	r0,r0,lsr#24
+
+	subs	r12,r12,#1
+	bne	.Lenc_loop
+
+	add	r10,r10,#2
+
+	ldrb	r4,[r10,r7,lsl#2]	@ Te4[s0>>0]
+	and	r7,lr,r1,lsr#16	@ i0
+	ldrb	r5,[r10,r8,lsl#2]	@ Te4[s0>>8]
+	and	r8,lr,r1
+	ldrb	r6,[r10,r9,lsl#2]	@ Te4[s0>>16]
+	and	r9,lr,r1,lsr#8
+	ldrb	r0,[r10,r0,lsl#2]	@ Te4[s0>>24]
+	mov	r1,r1,lsr#24
+
+	ldrb	r7,[r10,r7,lsl#2]	@ Te4[s1>>16]
+	ldrb	r8,[r10,r8,lsl#2]	@ Te4[s1>>0]
+	ldrb	r9,[r10,r9,lsl#2]	@ Te4[s1>>8]
+	eor	r0,r7,r0,lsl#8
+	ldrb	r1,[r10,r1,lsl#2]	@ Te4[s1>>24]
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r8,r5,lsl#8
+	and	r8,lr,r2,lsr#16	@ i1
+	eor	r6,r9,r6,lsl#8
+	and	r9,lr,r2
+	ldrb	r7,[r10,r7,lsl#2]	@ Te4[s2>>8]
+	eor	r1,r4,r1,lsl#24
+	ldrb	r8,[r10,r8,lsl#2]	@ Te4[s2>>16]
+	mov	r2,r2,lsr#24
+
+	ldrb	r9,[r10,r9,lsl#2]	@ Te4[s2>>0]
+	eor	r0,r7,r0,lsl#8
+	ldrb	r2,[r10,r2,lsl#2]	@ Te4[s2>>24]
+	and	r7,lr,r3		@ i0
+	eor	r1,r1,r8,lsl#16
+	and	r8,lr,r3,lsr#8	@ i1
+	eor	r6,r9,r6,lsl#8
+	and	r9,lr,r3,lsr#16	@ i2
+	ldrb	r7,[r10,r7,lsl#2]	@ Te4[s3>>0]
+	eor	r2,r5,r2,lsl#24
+	ldrb	r8,[r10,r8,lsl#2]	@ Te4[s3>>8]
+	mov	r3,r3,lsr#24
+
+	ldrb	r9,[r10,r9,lsl#2]	@ Te4[s3>>16]
+	eor	r0,r7,r0,lsl#8
+	ldr	r7,[r11,#0]
+	ldrb	r3,[r10,r3,lsl#2]	@ Te4[s3>>24]
+	eor	r1,r1,r8,lsl#8
+	ldr	r4,[r11,#4]
+	eor	r2,r2,r9,lsl#16
+	ldr	r5,[r11,#8]
+	eor	r3,r6,r3,lsl#24
+	ldr	r6,[r11,#12]
+
+	eor	r0,r0,r7
+	eor	r1,r1,r4
+	eor	r2,r2,r5
+	eor	r3,r3,r6
+
+	sub	r10,r10,#2
+	ldr	pc,[sp],#4		@ pop and return
+.size	_armv4_AES_encrypt,.-_armv4_AES_encrypt
+
+.global private_AES_set_encrypt_key
+.type   private_AES_set_encrypt_key,%function
+.align	5
+private_AES_set_encrypt_key:
+_armv4_AES_set_encrypt_key:
+	sub	r3,pc,#8		@ AES_set_encrypt_key
+	teq	r0,#0
+	moveq	r0,#-1
+	beq	.Labrt
+	teq	r2,#0
+	moveq	r0,#-1
+	beq	.Labrt
+
+	teq	r1,#128
+	beq	.Lok
+	teq	r1,#192
+	beq	.Lok
+	teq	r1,#256
+	movne	r0,#-1
+	bne	.Labrt
+
+.Lok:	stmdb   sp!,{r4-r12,lr}
+	sub	r10,r3,#_armv4_AES_set_encrypt_key-AES_Te-1024	@ Te4
+
+	mov	r12,r0		@ inp
+	mov	lr,r1			@ bits
+	mov	r11,r2			@ key
+
+#if __ARM_ARCH__<7
+	ldrb	r0,[r12,#3]	@ load input data in endian-neutral
+	ldrb	r4,[r12,#2]	@ manner...
+	ldrb	r5,[r12,#1]
+	ldrb	r6,[r12,#0]
+	orr	r0,r0,r4,lsl#8
+	ldrb	r1,[r12,#7]
+	orr	r0,r0,r5,lsl#16
+	ldrb	r4,[r12,#6]
+	orr	r0,r0,r6,lsl#24
+	ldrb	r5,[r12,#5]
+	ldrb	r6,[r12,#4]
+	orr	r1,r1,r4,lsl#8
+	ldrb	r2,[r12,#11]
+	orr	r1,r1,r5,lsl#16
+	ldrb	r4,[r12,#10]
+	orr	r1,r1,r6,lsl#24
+	ldrb	r5,[r12,#9]
+	ldrb	r6,[r12,#8]
+	orr	r2,r2,r4,lsl#8
+	ldrb	r3,[r12,#15]
+	orr	r2,r2,r5,lsl#16
+	ldrb	r4,[r12,#14]
+	orr	r2,r2,r6,lsl#24
+	ldrb	r5,[r12,#13]
+	ldrb	r6,[r12,#12]
+	orr	r3,r3,r4,lsl#8
+	str	r0,[r11],#16
+	orr	r3,r3,r5,lsl#16
+	str	r1,[r11,#-12]
+	orr	r3,r3,r6,lsl#24
+	str	r2,[r11,#-8]
+	str	r3,[r11,#-4]
+#else
+	ldr	r0,[r12,#0]
+	ldr	r1,[r12,#4]
+	ldr	r2,[r12,#8]
+	ldr	r3,[r12,#12]
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+	str	r0,[r11],#16
+	str	r1,[r11,#-12]
+	str	r2,[r11,#-8]
+	str	r3,[r11,#-4]
+#endif
+
+	teq	lr,#128
+	bne	.Lnot128
+	mov	r12,#10
+	str	r12,[r11,#240-16]
+	add	r6,r10,#256			@ rcon
+	mov	lr,#255
+
+.L128_loop:
+	and	r5,lr,r3,lsr#24
+	and	r7,lr,r3,lsr#16
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r3,lsr#8
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r3
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#24
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r6],#4			@ rcon[i++]
+	orr	r5,r5,r9,lsl#8
+	eor	r5,r5,r4
+	eor	r0,r0,r5			@ rk[4]=rk[0]^...
+	eor	r1,r1,r0			@ rk[5]=rk[1]^rk[4]
+	str	r0,[r11],#16
+	eor	r2,r2,r1			@ rk[6]=rk[2]^rk[5]
+	str	r1,[r11,#-12]
+	eor	r3,r3,r2			@ rk[7]=rk[3]^rk[6]
+	str	r2,[r11,#-8]
+	subs	r12,r12,#1
+	str	r3,[r11,#-4]
+	bne	.L128_loop
+	sub	r2,r11,#176
+	b	.Ldone
+
+.Lnot128:
+#if __ARM_ARCH__<7
+	ldrb	r8,[r12,#19]
+	ldrb	r4,[r12,#18]
+	ldrb	r5,[r12,#17]
+	ldrb	r6,[r12,#16]
+	orr	r8,r8,r4,lsl#8
+	ldrb	r9,[r12,#23]
+	orr	r8,r8,r5,lsl#16
+	ldrb	r4,[r12,#22]
+	orr	r8,r8,r6,lsl#24
+	ldrb	r5,[r12,#21]
+	ldrb	r6,[r12,#20]
+	orr	r9,r9,r4,lsl#8
+	orr	r9,r9,r5,lsl#16
+	str	r8,[r11],#8
+	orr	r9,r9,r6,lsl#24
+	str	r9,[r11,#-4]
+#else
+	ldr	r8,[r12,#16]
+	ldr	r9,[r12,#20]
+#ifdef __ARMEL__
+	rev	r8,r8
+	rev	r9,r9
+#endif
+	str	r8,[r11],#8
+	str	r9,[r11,#-4]
+#endif
+
+	teq	lr,#192
+	bne	.Lnot192
+	mov	r12,#12
+	str	r12,[r11,#240-24]
+	add	r6,r10,#256			@ rcon
+	mov	lr,#255
+	mov	r12,#8
+
+.L192_loop:
+	and	r5,lr,r9,lsr#24
+	and	r7,lr,r9,lsr#16
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r9,lsr#8
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r9
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#24
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r6],#4			@ rcon[i++]
+	orr	r5,r5,r9,lsl#8
+	eor	r9,r5,r4
+	eor	r0,r0,r9			@ rk[6]=rk[0]^...
+	eor	r1,r1,r0			@ rk[7]=rk[1]^rk[6]
+	str	r0,[r11],#24
+	eor	r2,r2,r1			@ rk[8]=rk[2]^rk[7]
+	str	r1,[r11,#-20]
+	eor	r3,r3,r2			@ rk[9]=rk[3]^rk[8]
+	str	r2,[r11,#-16]
+	subs	r12,r12,#1
+	str	r3,[r11,#-12]
+	subeq	r2,r11,#216
+	beq	.Ldone
+
+	ldr	r7,[r11,#-32]
+	ldr	r8,[r11,#-28]
+	eor	r7,r7,r3			@ rk[10]=rk[4]^rk[9]
+	eor	r9,r8,r7			@ rk[11]=rk[5]^rk[10]
+	str	r7,[r11,#-8]
+	str	r9,[r11,#-4]
+	b	.L192_loop
+
+.Lnot192:
+#if __ARM_ARCH__<7
+	ldrb	r8,[r12,#27]
+	ldrb	r4,[r12,#26]
+	ldrb	r5,[r12,#25]
+	ldrb	r6,[r12,#24]
+	orr	r8,r8,r4,lsl#8
+	ldrb	r9,[r12,#31]
+	orr	r8,r8,r5,lsl#16
+	ldrb	r4,[r12,#30]
+	orr	r8,r8,r6,lsl#24
+	ldrb	r5,[r12,#29]
+	ldrb	r6,[r12,#28]
+	orr	r9,r9,r4,lsl#8
+	orr	r9,r9,r5,lsl#16
+	str	r8,[r11],#8
+	orr	r9,r9,r6,lsl#24
+	str	r9,[r11,#-4]
+#else
+	ldr	r8,[r12,#24]
+	ldr	r9,[r12,#28]
+#ifdef __ARMEL__
+	rev	r8,r8
+	rev	r9,r9
+#endif
+	str	r8,[r11],#8
+	str	r9,[r11,#-4]
+#endif
+
+	mov	r12,#14
+	str	r12,[r11,#240-32]
+	add	r6,r10,#256			@ rcon
+	mov	lr,#255
+	mov	r12,#7
+
+.L256_loop:
+	and	r5,lr,r9,lsr#24
+	and	r7,lr,r9,lsr#16
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r9,lsr#8
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r9
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#24
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r6],#4			@ rcon[i++]
+	orr	r5,r5,r9,lsl#8
+	eor	r9,r5,r4
+	eor	r0,r0,r9			@ rk[8]=rk[0]^...
+	eor	r1,r1,r0			@ rk[9]=rk[1]^rk[8]
+	str	r0,[r11],#32
+	eor	r2,r2,r1			@ rk[10]=rk[2]^rk[9]
+	str	r1,[r11,#-28]
+	eor	r3,r3,r2			@ rk[11]=rk[3]^rk[10]
+	str	r2,[r11,#-24]
+	subs	r12,r12,#1
+	str	r3,[r11,#-20]
+	subeq	r2,r11,#256
+	beq	.Ldone
+
+	and	r5,lr,r3
+	and	r7,lr,r3,lsr#8
+	ldrb	r5,[r10,r5]
+	and	r8,lr,r3,lsr#16
+	ldrb	r7,[r10,r7]
+	and	r9,lr,r3,lsr#24
+	ldrb	r8,[r10,r8]
+	orr	r5,r5,r7,lsl#8
+	ldrb	r9,[r10,r9]
+	orr	r5,r5,r8,lsl#16
+	ldr	r4,[r11,#-48]
+	orr	r5,r5,r9,lsl#24
+
+	ldr	r7,[r11,#-44]
+	ldr	r8,[r11,#-40]
+	eor	r4,r4,r5			@ rk[12]=rk[4]^...
+	ldr	r9,[r11,#-36]
+	eor	r7,r7,r4			@ rk[13]=rk[5]^rk[12]
+	str	r4,[r11,#-16]
+	eor	r8,r8,r7			@ rk[14]=rk[6]^rk[13]
+	str	r7,[r11,#-12]
+	eor	r9,r9,r8			@ rk[15]=rk[7]^rk[14]
+	str	r8,[r11,#-8]
+	str	r9,[r11,#-4]
+	b	.L256_loop
+
+.Ldone:	mov	r0,#0
+	ldmia   sp!,{r4-r12,lr}
+.Labrt:	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+.size	private_AES_set_encrypt_key,.-private_AES_set_encrypt_key
+
+.global private_AES_set_decrypt_key
+.type   private_AES_set_decrypt_key,%function
+.align	5
+private_AES_set_decrypt_key:
+	str	lr,[sp,#-4]!            @ push lr
+#if 0
+	@ kernel does both of these in setkey so optimise this bit out by
+	@ expecting the key to already have the enc_key work done (see aes_glue.c)
+	bl	_armv4_AES_set_encrypt_key
+#else
+	mov	r0,#0
+#endif
+	teq	r0,#0
+	ldrne	lr,[sp],#4              @ pop lr
+	bne	.Labrt
+
+	stmdb   sp!,{r4-r12}
+
+	ldr	r12,[r2,#240]	@ AES_set_encrypt_key preserves r2,
+	mov	r11,r2			@ which is AES_KEY *key
+	mov	r7,r2
+	add	r8,r2,r12,lsl#4
+
+.Linv:	ldr	r0,[r7]
+	ldr	r1,[r7,#4]
+	ldr	r2,[r7,#8]
+	ldr	r3,[r7,#12]
+	ldr	r4,[r8]
+	ldr	r5,[r8,#4]
+	ldr	r6,[r8,#8]
+	ldr	r9,[r8,#12]
+	str	r0,[r8],#-16
+	str	r1,[r8,#16+4]
+	str	r2,[r8,#16+8]
+	str	r3,[r8,#16+12]
+	str	r4,[r7],#16
+	str	r5,[r7,#-12]
+	str	r6,[r7,#-8]
+	str	r9,[r7,#-4]
+	teq	r7,r8
+	bne	.Linv
+	ldr	r0,[r11,#16]!		@ prefetch tp1
+	mov	r7,#0x80
+	mov	r8,#0x1b
+	orr	r7,r7,#0x8000
+	orr	r8,r8,#0x1b00
+	orr	r7,r7,r7,lsl#16
+	orr	r8,r8,r8,lsl#16
+	sub	r12,r12,#1
+	mvn	r9,r7
+	mov	r12,r12,lsl#2	@ (rounds-1)*4
+
+.Lmix:	and	r4,r0,r7
+	and	r1,r0,r9
+	sub	r4,r4,r4,lsr#7
+	and	r4,r4,r8
+	eor	r1,r4,r1,lsl#1	@ tp2
+
+	and	r4,r1,r7
+	and	r2,r1,r9
+	sub	r4,r4,r4,lsr#7
+	and	r4,r4,r8
+	eor	r2,r4,r2,lsl#1	@ tp4
+
+	and	r4,r2,r7
+	and	r3,r2,r9
+	sub	r4,r4,r4,lsr#7
+	and	r4,r4,r8
+	eor	r3,r4,r3,lsl#1	@ tp8
+
+	eor	r4,r1,r2
+	eor	r5,r0,r3		@ tp9
+	eor	r4,r4,r3		@ tpe
+	eor	r4,r4,r1,ror#24
+	eor	r4,r4,r5,ror#24	@ ^= ROTATE(tpb=tp9^tp2,8)
+	eor	r4,r4,r2,ror#16
+	eor	r4,r4,r5,ror#16	@ ^= ROTATE(tpd=tp9^tp4,16)
+	eor	r4,r4,r5,ror#8	@ ^= ROTATE(tp9,24)
+
+	ldr	r0,[r11,#4]		@ prefetch tp1
+	str	r4,[r11],#4
+	subs	r12,r12,#1
+	bne	.Lmix
+
+	mov	r0,#0
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia   sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.size	private_AES_set_decrypt_key,.-private_AES_set_decrypt_key
+
+.type	AES_Td,%object
+.align	5
+AES_Td:
+.word	0x51f4a750, 0x7e416553, 0x1a17a4c3, 0x3a275e96
+.word	0x3bab6bcb, 0x1f9d45f1, 0xacfa58ab, 0x4be30393
+.word	0x2030fa55, 0xad766df6, 0x88cc7691, 0xf5024c25
+.word	0x4fe5d7fc, 0xc52acbd7, 0x26354480, 0xb562a38f
+.word	0xdeb15a49, 0x25ba1b67, 0x45ea0e98, 0x5dfec0e1
+.word	0xc32f7502, 0x814cf012, 0x8d4697a3, 0x6bd3f9c6
+.word	0x038f5fe7, 0x15929c95, 0xbf6d7aeb, 0x955259da
+.word	0xd4be832d, 0x587421d3, 0x49e06929, 0x8ec9c844
+.word	0x75c2896a, 0xf48e7978, 0x99583e6b, 0x27b971dd
+.word	0xbee14fb6, 0xf088ad17, 0xc920ac66, 0x7dce3ab4
+.word	0x63df4a18, 0xe51a3182, 0x97513360, 0x62537f45
+.word	0xb16477e0, 0xbb6bae84, 0xfe81a01c, 0xf9082b94
+.word	0x70486858, 0x8f45fd19, 0x94de6c87, 0x527bf8b7
+.word	0xab73d323, 0x724b02e2, 0xe31f8f57, 0x6655ab2a
+.word	0xb2eb2807, 0x2fb5c203, 0x86c57b9a, 0xd33708a5
+.word	0x302887f2, 0x23bfa5b2, 0x02036aba, 0xed16825c
+.word	0x8acf1c2b, 0xa779b492, 0xf307f2f0, 0x4e69e2a1
+.word	0x65daf4cd, 0x0605bed5, 0xd134621f, 0xc4a6fe8a
+.word	0x342e539d, 0xa2f355a0, 0x058ae132, 0xa4f6eb75
+.word	0x0b83ec39, 0x4060efaa, 0x5e719f06, 0xbd6e1051
+.word	0x3e218af9, 0x96dd063d, 0xdd3e05ae, 0x4de6bd46
+.word	0x91548db5, 0x71c45d05, 0x0406d46f, 0x605015ff
+.word	0x1998fb24, 0xd6bde997, 0x894043cc, 0x67d99e77
+.word	0xb0e842bd, 0x07898b88, 0xe7195b38, 0x79c8eedb
+.word	0xa17c0a47, 0x7c420fe9, 0xf8841ec9, 0x00000000
+.word	0x09808683, 0x322bed48, 0x1e1170ac, 0x6c5a724e
+.word	0xfd0efffb, 0x0f853856, 0x3daed51e, 0x362d3927
+.word	0x0a0fd964, 0x685ca621, 0x9b5b54d1, 0x24362e3a
+.word	0x0c0a67b1, 0x9357e70f, 0xb4ee96d2, 0x1b9b919e
+.word	0x80c0c54f, 0x61dc20a2, 0x5a774b69, 0x1c121a16
+.word	0xe293ba0a, 0xc0a02ae5, 0x3c22e043, 0x121b171d
+.word	0x0e090d0b, 0xf28bc7ad, 0x2db6a8b9, 0x141ea9c8
+.word	0x57f11985, 0xaf75074c, 0xee99ddbb, 0xa37f60fd
+.word	0xf701269f, 0x5c72f5bc, 0x44663bc5, 0x5bfb7e34
+.word	0x8b432976, 0xcb23c6dc, 0xb6edfc68, 0xb8e4f163
+.word	0xd731dcca, 0x42638510, 0x13972240, 0x84c61120
+.word	0x854a247d, 0xd2bb3df8, 0xaef93211, 0xc729a16d
+.word	0x1d9e2f4b, 0xdcb230f3, 0x0d8652ec, 0x77c1e3d0
+.word	0x2bb3166c, 0xa970b999, 0x119448fa, 0x47e96422
+.word	0xa8fc8cc4, 0xa0f03f1a, 0x567d2cd8, 0x223390ef
+.word	0x87494ec7, 0xd938d1c1, 0x8ccaa2fe, 0x98d40b36
+.word	0xa6f581cf, 0xa57ade28, 0xdab78e26, 0x3fadbfa4
+.word	0x2c3a9de4, 0x5078920d, 0x6a5fcc9b, 0x547e4662
+.word	0xf68d13c2, 0x90d8b8e8, 0x2e39f75e, 0x82c3aff5
+.word	0x9f5d80be, 0x69d0937c, 0x6fd52da9, 0xcf2512b3
+.word	0xc8ac993b, 0x10187da7, 0xe89c636e, 0xdb3bbb7b
+.word	0xcd267809, 0x6e5918f4, 0xec9ab701, 0x834f9aa8
+.word	0xe6956e65, 0xaaffe67e, 0x21bccf08, 0xef15e8e6
+.word	0xbae79bd9, 0x4a6f36ce, 0xea9f09d4, 0x29b07cd6
+.word	0x31a4b2af, 0x2a3f2331, 0xc6a59430, 0x35a266c0
+.word	0x744ebc37, 0xfc82caa6, 0xe090d0b0, 0x33a7d815
+.word	0xf104984a, 0x41ecdaf7, 0x7fcd500e, 0x1791f62f
+.word	0x764dd68d, 0x43efb04d, 0xccaa4d54, 0xe49604df
+.word	0x9ed1b5e3, 0x4c6a881b, 0xc12c1fb8, 0x4665517f
+.word	0x9d5eea04, 0x018c355d, 0xfa877473, 0xfb0b412e
+.word	0xb3671d5a, 0x92dbd252, 0xe9105633, 0x6dd64713
+.word	0x9ad7618c, 0x37a10c7a, 0x59f8148e, 0xeb133c89
+.word	0xcea927ee, 0xb761c935, 0xe11ce5ed, 0x7a47b13c
+.word	0x9cd2df59, 0x55f2733f, 0x1814ce79, 0x73c737bf
+.word	0x53f7cdea, 0x5ffdaa5b, 0xdf3d6f14, 0x7844db86
+.word	0xcaaff381, 0xb968c43e, 0x3824342c, 0xc2a3405f
+.word	0x161dc372, 0xbce2250c, 0x283c498b, 0xff0d9541
+.word	0x39a80171, 0x080cb3de, 0xd8b4e49c, 0x6456c190
+.word	0x7bcb8461, 0xd532b670, 0x486c5c74, 0xd0b85742
+@ Td4[256]
+.byte	0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38
+.byte	0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb
+.byte	0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87
+.byte	0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb
+.byte	0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d
+.byte	0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e
+.byte	0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2
+.byte	0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25
+.byte	0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16
+.byte	0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92
+.byte	0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda
+.byte	0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84
+.byte	0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a
+.byte	0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06
+.byte	0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02
+.byte	0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b
+.byte	0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea
+.byte	0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73
+.byte	0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85
+.byte	0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e
+.byte	0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89
+.byte	0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b
+.byte	0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20
+.byte	0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4
+.byte	0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31
+.byte	0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f
+.byte	0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d
+.byte	0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef
+.byte	0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0
+.byte	0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61
+.byte	0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26
+.byte	0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d
+.size	AES_Td,.-AES_Td
+
+@ void AES_decrypt(const unsigned char *in, unsigned char *out,
+@ 		 const AES_KEY *key) {
+.global AES_decrypt
+.type   AES_decrypt,%function
+.align	5
+AES_decrypt:
+	sub	r3,pc,#8		@ AES_decrypt
+	stmdb   sp!,{r1,r4-r12,lr}
+	mov	r12,r0		@ inp
+	mov	r11,r2
+	sub	r10,r3,#AES_decrypt-AES_Td		@ Td
+#if __ARM_ARCH__<7
+	ldrb	r0,[r12,#3]	@ load input data in endian-neutral
+	ldrb	r4,[r12,#2]	@ manner...
+	ldrb	r5,[r12,#1]
+	ldrb	r6,[r12,#0]
+	orr	r0,r0,r4,lsl#8
+	ldrb	r1,[r12,#7]
+	orr	r0,r0,r5,lsl#16
+	ldrb	r4,[r12,#6]
+	orr	r0,r0,r6,lsl#24
+	ldrb	r5,[r12,#5]
+	ldrb	r6,[r12,#4]
+	orr	r1,r1,r4,lsl#8
+	ldrb	r2,[r12,#11]
+	orr	r1,r1,r5,lsl#16
+	ldrb	r4,[r12,#10]
+	orr	r1,r1,r6,lsl#24
+	ldrb	r5,[r12,#9]
+	ldrb	r6,[r12,#8]
+	orr	r2,r2,r4,lsl#8
+	ldrb	r3,[r12,#15]
+	orr	r2,r2,r5,lsl#16
+	ldrb	r4,[r12,#14]
+	orr	r2,r2,r6,lsl#24
+	ldrb	r5,[r12,#13]
+	ldrb	r6,[r12,#12]
+	orr	r3,r3,r4,lsl#8
+	orr	r3,r3,r5,lsl#16
+	orr	r3,r3,r6,lsl#24
+#else
+	ldr	r0,[r12,#0]
+	ldr	r1,[r12,#4]
+	ldr	r2,[r12,#8]
+	ldr	r3,[r12,#12]
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+#endif
+	bl	_armv4_AES_decrypt
+
+	ldr	r12,[sp],#4		@ pop out
+#if __ARM_ARCH__>=7
+#ifdef __ARMEL__
+	rev	r0,r0
+	rev	r1,r1
+	rev	r2,r2
+	rev	r3,r3
+#endif
+	str	r0,[r12,#0]
+	str	r1,[r12,#4]
+	str	r2,[r12,#8]
+	str	r3,[r12,#12]
+#else
+	mov	r4,r0,lsr#24		@ write output in endian-neutral
+	mov	r5,r0,lsr#16		@ manner...
+	mov	r6,r0,lsr#8
+	strb	r4,[r12,#0]
+	strb	r5,[r12,#1]
+	mov	r4,r1,lsr#24
+	strb	r6,[r12,#2]
+	mov	r5,r1,lsr#16
+	strb	r0,[r12,#3]
+	mov	r6,r1,lsr#8
+	strb	r4,[r12,#4]
+	strb	r5,[r12,#5]
+	mov	r4,r2,lsr#24
+	strb	r6,[r12,#6]
+	mov	r5,r2,lsr#16
+	strb	r1,[r12,#7]
+	mov	r6,r2,lsr#8
+	strb	r4,[r12,#8]
+	strb	r5,[r12,#9]
+	mov	r4,r3,lsr#24
+	strb	r6,[r12,#10]
+	mov	r5,r3,lsr#16
+	strb	r2,[r12,#11]
+	mov	r6,r3,lsr#8
+	strb	r4,[r12,#12]
+	strb	r5,[r12,#13]
+	strb	r6,[r12,#14]
+	strb	r3,[r12,#15]
+#endif
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia   sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.size	AES_decrypt,.-AES_decrypt
+
+.type   _armv4_AES_decrypt,%function
+.align	2
+_armv4_AES_decrypt:
+	str	lr,[sp,#-4]!		@ push lr
+	ldmia	r11!,{r4-r7}
+	eor	r0,r0,r4
+	ldr	r12,[r11,#240-16]
+	eor	r1,r1,r5
+	eor	r2,r2,r6
+	eor	r3,r3,r7
+	sub	r12,r12,#1
+	mov	lr,#255
+
+	and	r7,lr,r0,lsr#16
+	and	r8,lr,r0,lsr#8
+	and	r9,lr,r0
+	mov	r0,r0,lsr#24
+.Ldec_loop:
+	ldr	r4,[r10,r7,lsl#2]	@ Td1[s0>>16]
+	and	r7,lr,r1		@ i0
+	ldr	r5,[r10,r8,lsl#2]	@ Td2[s0>>8]
+	and	r8,lr,r1,lsr#16
+	ldr	r6,[r10,r9,lsl#2]	@ Td3[s0>>0]
+	and	r9,lr,r1,lsr#8
+	ldr	r0,[r10,r0,lsl#2]	@ Td0[s0>>24]
+	mov	r1,r1,lsr#24
+
+	ldr	r7,[r10,r7,lsl#2]	@ Td3[s1>>0]
+	ldr	r8,[r10,r8,lsl#2]	@ Td1[s1>>16]
+	ldr	r9,[r10,r9,lsl#2]	@ Td2[s1>>8]
+	eor	r0,r0,r7,ror#24
+	ldr	r1,[r10,r1,lsl#2]	@ Td0[s1>>24]
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r8,r5,ror#8
+	and	r8,lr,r2		@ i1
+	eor	r6,r9,r6,ror#8
+	and	r9,lr,r2,lsr#16
+	ldr	r7,[r10,r7,lsl#2]	@ Td2[s2>>8]
+	eor	r1,r1,r4,ror#8
+	ldr	r8,[r10,r8,lsl#2]	@ Td3[s2>>0]
+	mov	r2,r2,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Td1[s2>>16]
+	eor	r0,r0,r7,ror#16
+	ldr	r2,[r10,r2,lsl#2]	@ Td0[s2>>24]
+	and	r7,lr,r3,lsr#16	@ i0
+	eor	r1,r1,r8,ror#24
+	and	r8,lr,r3,lsr#8	@ i1
+	eor	r6,r9,r6,ror#8
+	and	r9,lr,r3		@ i2
+	ldr	r7,[r10,r7,lsl#2]	@ Td1[s3>>16]
+	eor	r2,r2,r5,ror#8
+	ldr	r8,[r10,r8,lsl#2]	@ Td2[s3>>8]
+	mov	r3,r3,lsr#24
+
+	ldr	r9,[r10,r9,lsl#2]	@ Td3[s3>>0]
+	eor	r0,r0,r7,ror#8
+	ldr	r7,[r11],#16
+	eor	r1,r1,r8,ror#16
+	ldr	r3,[r10,r3,lsl#2]	@ Td0[s3>>24]
+	eor	r2,r2,r9,ror#24
+
+	ldr	r4,[r11,#-12]
+	eor	r0,r0,r7
+	ldr	r5,[r11,#-8]
+	eor	r3,r3,r6,ror#8
+	ldr	r6,[r11,#-4]
+	and	r7,lr,r0,lsr#16
+	eor	r1,r1,r4
+	and	r8,lr,r0,lsr#8
+	eor	r2,r2,r5
+	and	r9,lr,r0
+	eor	r3,r3,r6
+	mov	r0,r0,lsr#24
+
+	subs	r12,r12,#1
+	bne	.Ldec_loop
+
+	add	r10,r10,#1024
+
+	ldr	r5,[r10,#0]		@ prefetch Td4
+	ldr	r6,[r10,#32]
+	ldr	r4,[r10,#64]
+	ldr	r5,[r10,#96]
+	ldr	r6,[r10,#128]
+	ldr	r4,[r10,#160]
+	ldr	r5,[r10,#192]
+	ldr	r6,[r10,#224]
+
+	ldrb	r0,[r10,r0]		@ Td4[s0>>24]
+	ldrb	r4,[r10,r7]		@ Td4[s0>>16]
+	and	r7,lr,r1		@ i0
+	ldrb	r5,[r10,r8]		@ Td4[s0>>8]
+	and	r8,lr,r1,lsr#16
+	ldrb	r6,[r10,r9]		@ Td4[s0>>0]
+	and	r9,lr,r1,lsr#8
+
+	ldrb	r7,[r10,r7]		@ Td4[s1>>0]
+	ldrb	r1,[r10,r1,lsr#24]	@ Td4[s1>>24]
+	ldrb	r8,[r10,r8]		@ Td4[s1>>16]
+	eor	r0,r7,r0,lsl#24
+	ldrb	r9,[r10,r9]		@ Td4[s1>>8]
+	eor	r1,r4,r1,lsl#8
+	and	r7,lr,r2,lsr#8	@ i0
+	eor	r5,r5,r8,lsl#8
+	and	r8,lr,r2		@ i1
+	ldrb	r7,[r10,r7]		@ Td4[s2>>8]
+	eor	r6,r6,r9,lsl#8
+	ldrb	r8,[r10,r8]		@ Td4[s2>>0]
+	and	r9,lr,r2,lsr#16
+
+	ldrb	r2,[r10,r2,lsr#24]	@ Td4[s2>>24]
+	eor	r0,r0,r7,lsl#8
+	ldrb	r9,[r10,r9]		@ Td4[s2>>16]
+	eor	r1,r8,r1,lsl#16
+	and	r7,lr,r3,lsr#16	@ i0
+	eor	r2,r5,r2,lsl#16
+	and	r8,lr,r3,lsr#8	@ i1
+	ldrb	r7,[r10,r7]		@ Td4[s3>>16]
+	eor	r6,r6,r9,lsl#16
+	ldrb	r8,[r10,r8]		@ Td4[s3>>8]
+	and	r9,lr,r3		@ i2
+
+	ldrb	r9,[r10,r9]		@ Td4[s3>>0]
+	ldrb	r3,[r10,r3,lsr#24]	@ Td4[s3>>24]
+	eor	r0,r0,r7,lsl#16
+	ldr	r7,[r11,#0]
+	eor	r1,r1,r8,lsl#8
+	ldr	r4,[r11,#4]
+	eor	r2,r9,r2,lsl#8
+	ldr	r5,[r11,#8]
+	eor	r3,r6,r3,lsl#24
+	ldr	r6,[r11,#12]
+
+	eor	r0,r0,r7
+	eor	r1,r1,r4
+	eor	r2,r2,r5
+	eor	r3,r3,r6
+
+	sub	r10,r10,#1024
+	ldr	pc,[sp],#4		@ pop and return
+.size	_armv4_AES_decrypt,.-_armv4_AES_decrypt
+.asciz	"AES for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
+.align	2
diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c
new file mode 100644
index 000000000000..59f7877ead6a
--- /dev/null
+++ b/arch/arm/crypto/aes_glue.c
@@ -0,0 +1,108 @@
+/*
+ * Glue Code for the asm optimized version of the AES Cipher Algorithm
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <crypto/aes.h>
+
+#define AES_MAXNR 14
+
+typedef struct {
+	unsigned int rd_key[4 *(AES_MAXNR + 1)];
+	int rounds;
+} AES_KEY;
+
+struct AES_CTX {
+	AES_KEY enc_key;
+	AES_KEY dec_key;
+};
+
+asmlinkage void AES_encrypt(const u8 *in, u8 *out, AES_KEY *ctx);
+asmlinkage void AES_decrypt(const u8 *in, u8 *out, AES_KEY *ctx);
+asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
+	AES_encrypt(src, dst, &ctx->enc_key);
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
+	AES_decrypt(src, dst, &ctx->dec_key);
+}
+
+static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+		unsigned int key_len)
+{
+	struct AES_CTX *ctx = crypto_tfm_ctx(tfm);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		key_len = 128;
+		break;
+	case AES_KEYSIZE_192:
+		key_len = 192;
+		break;
+	case AES_KEYSIZE_256:
+		key_len = 256;
+		break;
+	default:
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	if (private_AES_set_encrypt_key(in_key, key_len, &ctx->enc_key) == -1) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	/* private_AES_set_decrypt_key expects an encryption key as input */
+	ctx->dec_key = ctx->enc_key;
+	if (private_AES_set_decrypt_key(in_key, key_len, &ctx->dec_key) == -1) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct crypto_alg aes_alg = {
+	.cra_name		= "aes",
+	.cra_driver_name	= "aes-asm",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct AES_CTX),
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(aes_alg.cra_list),
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= AES_MIN_KEY_SIZE,
+			.cia_max_keysize	= AES_MAX_KEY_SIZE,
+			.cia_setkey			= aes_set_key,
+			.cia_encrypt		= aes_encrypt,
+			.cia_decrypt		= aes_decrypt
+		}
+	}
+};
+
+static int __init aes_init(void)
+{
+	return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+	crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-asm");
+MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
new file mode 100644
index 000000000000..7050ab133b9d
--- /dev/null
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -0,0 +1,503 @@
+#define __ARM_ARCH__ __LINUX_ARM_ARCH__
+@ ====================================================================
+@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see http://www.openssl.org/~appro/cryptogams/.
+@ ====================================================================
+
+@ sha1_block procedure for ARMv4.
+@
+@ January 2007.
+
+@ Size/performance trade-off
+@ ====================================================================
+@ impl		size in bytes	comp cycles[*]	measured performance
+@ ====================================================================
+@ thumb		304		3212		4420
+@ armv4-small	392/+29%	1958/+64%	2250/+96%
+@ armv4-compact	740/+89%	1552/+26%	1840/+22%
+@ armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
+@ full unroll	~5100/+260%	~1260/+4%	~1300/+5%
+@ ====================================================================
+@ thumb		= same as 'small' but in Thumb instructions[**] and
+@		  with recurring code in two private functions;
+@ small		= detached Xload/update, loops are folded;
+@ compact	= detached Xload/update, 5x unroll;
+@ large		= interleaved Xload/update, 5x unroll;
+@ full unroll	= interleaved Xload/update, full unroll, estimated[!];
+@
+@ [*]	Manually counted instructions in "grand" loop body. Measured
+@	performance is affected by prologue and epilogue overhead,
+@	i-cache availability, branch penalties, etc.
+@ [**]	While each Thumb instruction is twice smaller, they are not as
+@	diverse as ARM ones: e.g., there are only two arithmetic
+@	instructions with 3 arguments, no [fixed] rotate, addressing
+@	modes are limited. As result it takes more instructions to do
+@	the same job in Thumb, therefore the code is never twice as
+@	small and always slower.
+@ [***]	which is also ~35% better than compiler generated code. Dual-
+@	issue Cortex A8 core was measured to process input block in
+@	~990 cycles.
+
+@ August 2010.
+@
+@ Rescheduling for dual-issue pipeline resulted in 13% improvement on
+@ Cortex A8 core and in absolute terms ~870 cycles per input block
+@ [or 13.6 cycles per byte].
+
+@ February 2011.
+@
+@ Profiler-assisted and platform-specific optimization resulted in 10%
+@ improvement on Cortex A8 core and 12.2 cycles per byte.
+
+.text
+
+.global	sha1_block_data_order
+.type	sha1_block_data_order,%function
+
+.align	2
+sha1_block_data_order:
+	stmdb	sp!,{r4-r12,lr}
+	add	r2,r1,r2,lsl#6	@ r2 to point at the end of r1
+	ldmia	r0,{r3,r4,r5,r6,r7}
+.Lloop:
+	ldr	r8,.LK_00_19
+	mov	r14,sp
+	sub	sp,sp,#15*4
+	mov	r5,r5,ror#30
+	mov	r6,r6,ror#30
+	mov	r7,r7,ror#30		@ [6]
+.L_00_15:
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r5,r6			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	eor	r10,r5,r6			@ F_xx_xx
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r4,r10,ror#2
+	add	r7,r7,r9			@ E+=X[i]
+	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r6,r8,r6,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r4,r5			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r6,r8,r6,ror#2			@ E+=K_00_19
+	eor	r10,r4,r5			@ F_xx_xx
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r3,r10,ror#2
+	add	r6,r6,r9			@ E+=X[i]
+	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r5,r8,r5,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r3,r4			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r5,r8,r5,ror#2			@ E+=K_00_19
+	eor	r10,r3,r4			@ F_xx_xx
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r7,r10,ror#2
+	add	r5,r5,r9			@ E+=X[i]
+	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r4,r8,r4,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r7,r3			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r4,r8,r4,ror#2			@ E+=K_00_19
+	eor	r10,r7,r3			@ F_xx_xx
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r6,r10,ror#2
+	add	r4,r4,r9			@ E+=X[i]
+	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r3,r8,r3,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r6,r7			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r3,r8,r3,ror#2			@ E+=K_00_19
+	eor	r10,r6,r7			@ F_xx_xx
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r5,r10,ror#2
+	add	r3,r3,r9			@ E+=X[i]
+	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
+	teq	r14,sp
+	bne	.L_00_15		@ [((11+4)*5+2)*3]
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r5,r6			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	eor	r10,r5,r6			@ F_xx_xx
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r4,r10,ror#2
+	add	r7,r7,r9			@ E+=X[i]
+	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r3,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
+	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r7,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
+	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r6,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
+	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r5,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
+	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
+
+	ldr	r8,.LK_20_39		@ [+15+16*4]
+	sub	sp,sp,#25*4
+	cmn	sp,#0			@ [+3], clear carry to denote 20_39
+.L_20_39_or_60_79:
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r5,r6			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r4,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r7,r7,r9			@ E+=X[i]
+	add	r7,r7,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r3,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	add	r6,r6,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r7,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	add	r5,r5,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r6,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	add	r4,r4,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r5,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	add	r3,r3,r10			@ E+=F_20_39(B,C,D)
+	teq	r14,sp			@ preserve carry
+	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
+	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes
+
+	ldr	r8,.LK_40_59
+	sub	sp,sp,#20*4		@ [+2]
+.L_40_59:
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r5,r6			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r4,r10,ror#2					@ F_xx_xx
+	and r11,r5,r6					@ F_xx_xx
+	add	r7,r7,r9			@ E+=X[i]
+	add	r7,r7,r10			@ E+=F_40_59(B,C,D)
+	add	r7,r7,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r3,r10,ror#2					@ F_xx_xx
+	and r11,r4,r5					@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	add	r6,r6,r10			@ E+=F_40_59(B,C,D)
+	add	r6,r6,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r7,r10,ror#2					@ F_xx_xx
+	and r11,r3,r4					@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	add	r5,r5,r10			@ E+=F_40_59(B,C,D)
+	add	r5,r5,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r6,r10,ror#2					@ F_xx_xx
+	and r11,r7,r3					@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	add	r4,r4,r10			@ E+=F_40_59(B,C,D)
+	add	r4,r4,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r5,r10,ror#2					@ F_xx_xx
+	and r11,r6,r7					@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	add	r3,r3,r10			@ E+=F_40_59(B,C,D)
+	add	r3,r3,r11,ror#2
+	teq	r14,sp
+	bne	.L_40_59		@ [+((12+5)*5+2)*4]
+
+	ldr	r8,.LK_60_79
+	sub	sp,sp,#20*4
+	cmp	sp,#0			@ set carry to denote 60_79
+	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
+.L_done:
+	add	sp,sp,#80*4		@ "deallocate" stack frame
+	ldmia	r0,{r8,r9,r10,r11,r12}
+	add	r3,r8,r3
+	add	r4,r9,r4
+	add	r5,r10,r5,ror#2
+	add	r6,r11,r6,ror#2
+	add	r7,r12,r7,ror#2
+	stmia	r0,{r3,r4,r5,r6,r7}
+	teq	r1,r2
+	bne	.Lloop			@ [+18], total 1307
+
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia	sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+#endif
+.align	2
+.LK_00_19:	.word	0x5a827999
+.LK_20_39:	.word	0x6ed9eba1
+.LK_40_59:	.word	0x8f1bbcdc
+.LK_60_79:	.word	0xca62c1d6
+.size	sha1_block_data_order,.-sha1_block_data_order
+.asciz	"SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
+.align	2
diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c
new file mode 100644
index 000000000000..76cd976230bc
--- /dev/null
+++ b/arch/arm/crypto/sha1_glue.c
@@ -0,0 +1,179 @@
+/*
+ * Cryptographic API.
+ * Glue code for the SHA1 Secure Hash Algorithm assembler implementation
+ *
+ * This file is based on sha1_generic.c and sha1_ssse3_glue.c
+ *
+ * Copyright (c) Alan Smithee.
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
+ * Copyright (c) Mathias Krause <minipli@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/sha.h>
+#include <asm/byteorder.h>
+
+struct SHA1_CTX {
+	uint32_t h0,h1,h2,h3,h4;
+	u64 count;
+	u8 data[SHA1_BLOCK_SIZE];
+};
+
+asmlinkage void sha1_block_data_order(struct SHA1_CTX *digest,
+		const unsigned char *data, unsigned int rounds);
+
+
+static int sha1_init(struct shash_desc *desc)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	memset(sctx, 0, sizeof(*sctx));
+	sctx->h0 = SHA1_H0;
+	sctx->h1 = SHA1_H1;
+	sctx->h2 = SHA1_H2;
+	sctx->h3 = SHA1_H3;
+	sctx->h4 = SHA1_H4;
+	return 0;
+}
+
+
+static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data,
+			       unsigned int len, unsigned int partial)
+{
+	unsigned int done = 0;
+
+	sctx->count += len;
+
+	if (partial) {
+		done = SHA1_BLOCK_SIZE - partial;
+		memcpy(sctx->data + partial, data, done);
+		sha1_block_data_order(sctx, sctx->data, 1);
+	}
+
+	if (len - done >= SHA1_BLOCK_SIZE) {
+		const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE;
+		sha1_block_data_order(sctx, data + done, rounds);
+		done += rounds * SHA1_BLOCK_SIZE;
+	}
+
+	memcpy(sctx->data, data + done, len - done);
+	return 0;
+}
+
+
+static int sha1_update(struct shash_desc *desc, const u8 *data,
+			     unsigned int len)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	unsigned int partial = sctx->count % SHA1_BLOCK_SIZE;
+	int res;
+
+	/* Handle the fast case right here */
+	if (partial + len < SHA1_BLOCK_SIZE) {
+		sctx->count += len;
+		memcpy(sctx->data + partial, data, len);
+		return 0;
+	}
+	res = __sha1_update(sctx, data, len, partial);
+	return res;
+}
+
+
+/* Add padding and return the message digest. */
+static int sha1_final(struct shash_desc *desc, u8 *out)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	unsigned int i, index, padlen;
+	__be32 *dst = (__be32 *)out;
+	__be64 bits;
+	static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, };
+
+	bits = cpu_to_be64(sctx->count << 3);
+
+	/* Pad out to 56 mod 64 and append length */
+	index = sctx->count % SHA1_BLOCK_SIZE;
+	padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index);
+	/* We need to fill a whole block for __sha1_update() */
+	if (padlen <= 56) {
+		sctx->count += padlen;
+		memcpy(sctx->data + index, padding, padlen);
+	} else {
+		__sha1_update(sctx, padding, padlen, index);
+	}
+	__sha1_update(sctx, (const u8 *)&bits, sizeof(bits), 56);
+
+	/* Store state in digest */
+	for (i = 0; i < 5; i++)
+		dst[i] = cpu_to_be32(((u32 *)sctx)[i]);
+
+	/* Wipe context */
+	memset(sctx, 0, sizeof(*sctx));
+	return 0;
+}
+
+
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	memcpy(out, sctx, sizeof(*sctx));
+	return 0;
+}
+
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+	struct SHA1_CTX *sctx = shash_desc_ctx(desc);
+	memcpy(sctx, in, sizeof(*sctx));
+	return 0;
+}
+
+
+static struct shash_alg alg = {
+	.digestsize	=	SHA1_DIGEST_SIZE,
+	.init		=	sha1_init,
+	.update		=	sha1_update,
+	.final		=	sha1_final,
+	.export		=	sha1_export,
+	.import		=	sha1_import,
+	.descsize	=	sizeof(struct SHA1_CTX),
+	.statesize	=	sizeof(struct SHA1_CTX),
+	.base		=	{
+		.cra_name	=	"sha1",
+		.cra_driver_name=	"sha1-asm",
+		.cra_priority	=	150,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA1_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+
+static int __init sha1_mod_init(void)
+{
+	return crypto_register_shash(&alg);
+}
+
+
+static void __exit sha1_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+
+module_init(sha1_mod_init);
+module_exit(sha1_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)");
+MODULE_ALIAS("sha1");
+MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 960abceb8e14..8a7196ca5106 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -5,16 +5,33 @@ header-y += hwcap.h
 generic-y += auxvec.h
 generic-y += bitsperlong.h
 generic-y += cputime.h
+generic-y += current.h
 generic-y += emergency-restart.h
 generic-y += errno.h
+generic-y += exec.h
 generic-y += ioctl.h
+generic-y += ipcbuf.h
 generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
 generic-y += percpu.h
 generic-y += poll.h
 generic-y += resource.h
 generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
 generic-y += siginfo.h
 generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += timex.h
+generic-y += types.h
+generic-y += unaligned.h
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 62e75475e57e..d40229d9a1c9 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -2,11 +2,12 @@
 #define __ASMARM_ARCH_TIMER_H
 
 #include <asm/errno.h>
+#include <linux/clocksource.h>
 
 #ifdef CONFIG_ARM_ARCH_TIMER
-#define ARCH_HAS_READ_CURRENT_TIMER
 int arch_timer_of_register(void);
 int arch_timer_sched_clock_init(void);
+struct timecounter *arch_timer_get_timecounter(void);
 #else
 static inline int arch_timer_of_register(void)
 {
@@ -17,6 +18,11 @@ static inline int arch_timer_sched_clock_init(void)
 {
 	return -ENXIO;
 }
+
+static inline struct timecounter *arch_timer_get_timecounter(void)
+{
+	return NULL;
+}
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 03fb93621d0d..5c8b3bf4d825 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 05112380dc53..8dcd9c702d90 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -44,10 +44,9 @@
 #define rmb()		dsb()
 #define wmb()		mb()
 #else
-#include <asm/memory.h>
-#define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define mb()		barrier()
+#define rmb()		barrier()
+#define wmb()		barrier()
 #endif
 
 #ifndef CONFIG_SMP
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
deleted file mode 100644
index 75d21e2a3ff7..000000000000
--- a/arch/arm/include/asm/current.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASMARM_CURRENT_H
-#define _ASMARM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-static inline struct task_struct *get_current(void) __attribute_const__;
-
-static inline struct task_struct *get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current (get_current())
-
-#endif /* _ASMARM_CURRENT_H */
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index dc6145120de3..ab98fdd083bd 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -15,6 +15,11 @@
 
 #ifndef __ASSEMBLY__
 
+struct delay_timer {
+	unsigned long (*read_current_timer)(void);
+	unsigned long freq;
+};
+
 extern struct arm_delay_ops {
 	void (*delay)(unsigned long);
 	void (*const_udelay)(unsigned long);
@@ -56,6 +61,10 @@ extern void __loop_delay(unsigned long loops);
 extern void __loop_udelay(unsigned long usecs);
 extern void __loop_const_udelay(unsigned long);
 
+/* Delay-loop timer registration. */
+#define ARCH_HAS_READ_CURRENT_TIMER
+extern void register_current_timer_delay(const struct delay_timer *timer);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* defined(_ARM_DELAY_H) */
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 2ae842df4551..23004847bb05 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -13,6 +13,7 @@
 
 #define DMA_ERROR_CODE	(~0)
 extern struct dma_map_ops arm_dma_ops;
+extern struct dma_map_ops arm_coherent_dma_ops;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
@@ -203,6 +204,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 }
 
 /*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
+/*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the
  * memory allocator is initialised, i.e. before any core_initcall.
diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h
deleted file mode 100644
index 7c4fbef72b3a..000000000000
--- a/arch/arm/include/asm/exec.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARM_EXEC_H
-#define __ASM_ARM_EXEC_H
-
-#define arch_align_stack(x) (x)
-
-#endif /* __ASM_ARM_EXEC_H */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index 7e30874377e6..4f8d2c0dc441 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -110,19 +110,19 @@
 #endif
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-//# ifdef _CACHE
+# ifdef _CACHE
 #  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v6
-//# endif
+# else
+#  define _CACHE v6
+# endif
 #endif
 
 #if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
+# ifdef _CACHE
 #  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v7
-//# endif
+# else
+#  define _CACHE v7
+# endif
 #endif
 
 #if !defined(_CACHE) && !defined(MULTI_CACHE)
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index c402e9b31f4c..477e0206e016 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -6,7 +6,9 @@
 #endif
 
 /* not all ARM platforms necessarily support this API ... */
+#ifdef CONFIG_NEED_MACH_GPIO_H
 #include <mach/gpio.h>
+#endif
 
 #ifndef __ARM_GPIOLIB_COMPLEX
 /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 436e60b2cf7a..2740c2a2df63 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,7 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	5
+#define NR_IPI	6
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
index 538f17ca905b..295e2e40151b 100644
--- a/arch/arm/include/asm/hardware/cache-tauros2.h
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -8,4 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-extern void __init tauros2_init(void);
+#define CACHE_TAUROS2_PREFETCH_ON	(1 << 0)
+#define CACHE_TAUROS2_LINEFILL_BURST8	(1 << 1)
+
+extern void __init tauros2_init(unsigned int features);
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 2ff2c75a4639..02fe2fbe2477 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -217,18 +217,8 @@ extern int iop3xx_get_init_atu(void);
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
 #define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
-#define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_VA		0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x90000000
-#define IOP3XX_PCI_UPPER_IO_PA		(IOP3XX_PCI_LOWER_IO_PA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
-					IOP3XX_PCI_LOWER_IO_PA) +\
-					IOP3XX_PCI_LOWER_IO_VA)
-
+#define IOP3XX_PCI_LOWER_IO_BA		0x00000000
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h
deleted file mode 100644
index 7ec91168a576..000000000000
--- a/arch/arm/include/asm/hardware/linkup-l1110.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2	(1 << 1)
-#define LINKUP_PRS_S3	(1 << 2)
-#define LINKUP_PRS_S4	(1 << 3)
-#define LINKUP_PRS_BVD1	(1 << 4)
-#define LINKUP_PRS_BVD2	(1 << 5)
-#define LINKUP_PRS_VS1	(1 << 6)
-#define LINKUP_PRS_VS2	(1 << 7)
-#define LINKUP_PRS_RDY	(1 << 8)
-#define LINKUP_PRS_CD1	(1 << 9)
-#define LINKUP_PRS_CD2	(1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1	(1 << 0)
-#define LINKUP_PRC_S2	(1 << 1)
-#define LINKUP_PRC_S3	(1 << 2)
-#define LINKUP_PRC_S4	(1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
-
-struct linkup_l1110 {
-	volatile short prc;
-};
diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h
new file mode 100644
index 000000000000..b90d9e523d6f
--- /dev/null
+++ b/arch/arm/include/asm/hypervisor.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_HYPERVISOR_H
+#define _ASM_ARM_HYPERVISOR_H
+
+#include <asm/xen/hypervisor.h>
+
+#endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 815c669fec0a..35c1ed89b936 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -47,13 +47,68 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
 extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
 extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 
-#define __raw_writeb(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v)))
-#define __raw_writew(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)))
-#define __raw_writel(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v)))
+#if __LINUX_ARM_ARCH__ < 6
+/*
+ * Half-word accesses are problematic with RiscPC due to limitations of
+ * the bus. Rather than special-case the machine, just let the compiler
+ * generate the access for CPUs prior to ARMv6.
+ */
+#define __raw_readw(a)         (__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
+#define __raw_writew(v,a)      ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)))
+#else
+/*
+ * When running under a hypervisor, we want to avoid I/O accesses with
+ * writeback addressing modes as these incur a significant performance
+ * overhead (the address generation must be emulated in software).
+ */
+static inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+	asm volatile("strh %1, %0"
+		     : "+Qo" (*(volatile u16 __force *)addr)
+		     : "r" (val));
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 val;
+	asm volatile("ldrh %1, %0"
+		     : "+Qo" (*(volatile u16 __force *)addr),
+		       "=r" (val));
+	return val;
+}
+#endif
+
+static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+	asm volatile("strb %1, %0"
+		     : "+Qo" (*(volatile u8 __force *)addr)
+		     : "r" (val));
+}
+
+static inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+	asm volatile("str %1, %0"
+		     : "+Qo" (*(volatile u32 __force *)addr)
+		     : "r" (val));
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 val;
+	asm volatile("ldrb %1, %0"
+		     : "+Qo" (*(volatile u8 __force *)addr),
+		       "=r" (val));
+	return val;
+}
 
-#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
-#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
-#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 val;
+	asm volatile("ldr %1, %0"
+		     : "+Qo" (*(volatile u32 __force *)addr),
+		       "=r" (val));
+	return val;
+}
 
 /*
  * Architecture ioremap implementation.
@@ -113,11 +168,19 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #define __iowmb()		do { } while (0)
 #endif
 
+/* PCI fixed i/o mapping */
+#define PCI_IO_VIRT_BASE	0xfee00000
+
+extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+
 /*
  * Now, pick up the machine-defined IO definitions
  */
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
+#elif defined(CONFIG_PCI)
+#define IO_SPACE_LIMIT	((resource_size_t)0xfffff)
+#define __io(a)		__typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
 #else
 #define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
 #endif
diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51cb6d0..000000000000
--- a/arch/arm/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739f39b7..000000000000
--- a/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/include/asm/leds.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Event-driven interface for LEDs on machines
- *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
-	led_idle_start,
-	led_idle_end,
-	led_timer,
-	led_start,
-	led_stop,
-	led_claim,		/* override idle & timer leds */
-	led_release,		/* restore idle & timer leds */
-	led_start_timer_mode,
-	led_stop_timer_mode,
-	led_green_on,
-	led_green_off,
-	led_amber_on,
-	led_amber_off,
-	led_red_on,
-	led_red_off,
-	led_blue_on,
-	led_blue_off,
-	/*
-	 * I want this between led_timer and led_start, but
-	 * someone has decided to export this to user space
-	 */
-	led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 0b1c94b8c652..917d4fcfd9b4 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -14,6 +14,12 @@ struct tag;
 struct meminfo;
 struct sys_timer;
 struct pt_regs;
+struct smp_operations;
+#ifdef CONFIG_SMP
+#define smp_ops(ops) (&(ops))
+#else
+#define smp_ops(ops) (struct smp_operations *)NULL
+#endif
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
@@ -35,6 +41,7 @@ struct machine_desc {
 	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
 	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
 	char			restart_mode;	/* default restart mode	*/
+	struct smp_operations	*smp;		/* SMP operations	*/
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
 	void			(*reserve)(void);/* reserve mem blocks	*/
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index a6efcdd6fd25..195ac2f9d3d3 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -9,6 +9,9 @@
  *
  *  Page table mapping constructs and function prototypes
  */
+#ifndef __ASM_MACH_MAP_H
+#define __ASM_MACH_MAP_H
+
 #include <asm/io.h>
 
 struct map_desc {
@@ -34,6 +37,8 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
+				  void *caller);
 
 struct mem_type;
 extern const struct mem_type *get_mem_type(unsigned int type);
@@ -44,4 +49,7 @@ extern int ioremap_page(unsigned long virt, unsigned long phys,
 			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
+#define vm_reserve_area_early(a,s,c)	do { } while (0)
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 26c511fddf8f..db9fedb57f2c 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_MACH_PCI_H
 #define __ASM_MACH_PCI_H
 
+#include <linux/ioport.h>
+
 struct pci_sys_data;
 struct pci_ops;
 struct pci_bus;
@@ -42,6 +44,8 @@ struct pci_sys_data {
 	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
 	struct pci_bus	*bus;		/* PCI bus				*/
 	struct list_head resources;	/* root bus resources (apertures)       */
+	struct resource io_res;
+	char		io_res_name[12];
 					/* Bridge swizzling			*/
 	u8		(*swizzle)(struct pci_dev *, u8 *);
 					/* IRQ mapping				*/
@@ -55,6 +59,15 @@ struct pci_sys_data {
 void pci_common_init(struct hw_pci *);
 
 /*
+ * Setup early fixed I/O mapping.
+ */
+#if defined(CONFIG_PCI)
+extern void pci_map_io_early(unsigned long pfn);
+#else
+static inline void pci_map_io_early(unsigned long pfn) {}
+#endif
+
+/*
  * PCI controllers
  */
 extern struct pci_ops iop3xx_ops;
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index e965f1b560f1..73cf03aa981e 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.
@@ -272,14 +275,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
-/*
- * Optional coherency support.  Currently used only by selected
- * Intel XSC3-based systems.
- */
-#ifndef arch_is_coherent
-#define arch_is_coherent()		0
-#endif
-
 #endif
 
 #include <asm-generic/memory_model.h>
diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h
deleted file mode 100644
index 33b35b946eaa..000000000000
--- a/arch/arm/include/asm/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASMARM_MSGBUF_H
-#define _ASMARM_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _ASMARM_MSGBUF_H */
diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h
index b1479fd04a95..87c044910fe0 100644
--- a/arch/arm/include/asm/mutex.h
+++ b/arch/arm/include/asm/mutex.h
@@ -9,8 +9,13 @@
 #define _ASM_MUTEX_H
 /*
  * On pre-ARMv6 hardware this results in a swp-based implementation,
- * which is the most efficient. For ARMv6+, we emit a pair of exclusive
- * accesses instead.
+ * which is the most efficient. For ARMv6+, we have exclusive memory
+ * accessors and use atomic_dec to avoid the extra xchg operations
+ * on the locking slowpaths.
  */
+#if __LINUX_ARM_ARCH__ < 6
 #include <asm-generic/mutex-xchg.h>
+#else
+#include <asm-generic/mutex-dec.h>
 #endif
+#endif	/* _ASM_MUTEX_H */
diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/include/asm/opcodes-virt.h
index 0c14259705b9..b85665a96f8e 100644
--- a/arch/arm/mach-mxs/include/mach/entry-macro.S
+++ b/arch/arm/include/asm/opcodes-virt.h
@@ -1,7 +1,6 @@
 /*
- * Low-level IRQ helper macros for Freescale MXS-based
- *
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
+ * Copyright (C) 2012  Linaro Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,19 +16,14 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
+#ifndef __ASM_ARM_OPCODES_VIRT_H
+#define __ASM_ARM_OPCODES_VIRT_H
 
-#include <mach/mxs.h>
-
-#define MXS_ICOLL_VBASE		MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
-#define HW_ICOLL_STAT_OFFSET	0x70
+#include <asm/opcodes.h>
 
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
-	cmp	\irqnr, #0x7F
-	strne	\irqnr, [\base]
-	moveqs	\irqnr, #0
-	.endm
+#define __HVC(imm16) __inst_arm_thumb32(				\
+	0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F),	\
+	0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF)	\
+)
 
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MXS_ICOLL_VBASE
-	.endm
+#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
index 19c48deda70f..74e211a6fb24 100644
--- a/arch/arm/include/asm/opcodes.h
+++ b/arch/arm/include/asm/opcodes.h
@@ -19,6 +19,33 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
 
 
 /*
+ * Assembler opcode byteswap helpers.
+ * These are only intended for use by this header: don't use them directly,
+ * because they will be suboptimal in most cases.
+ */
+#define ___asm_opcode_swab32(x) (	\
+	  (((x) << 24) & 0xFF000000)	\
+	| (((x) <<  8) & 0x00FF0000)	\
+	| (((x) >>  8) & 0x0000FF00)	\
+	| (((x) >> 24) & 0x000000FF)	\
+)
+#define ___asm_opcode_swab16(x) (	\
+	  (((x) << 8) & 0xFF00)		\
+	| (((x) >> 8) & 0x00FF)		\
+)
+#define ___asm_opcode_swahb32(x) (	\
+	  (((x) << 8) & 0xFF00FF00)	\
+	| (((x) >> 8) & 0x00FF00FF)	\
+)
+#define ___asm_opcode_swahw32(x) (	\
+	  (((x) << 16) & 0xFFFF0000)	\
+	| (((x) >> 16) & 0x0000FFFF)	\
+)
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
+
+
+/*
  * Opcode byteswap helpers
  *
  * These macros help with converting instructions between a canonical integer
@@ -41,39 +68,163 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
  * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
  * represent any valid Thumb-2 instruction.  For this range,
  * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ *
+ * The ___asm variants are intended only for use by this header, in situations
+ * involving inline assembler.  For .S files, the normal __opcode_*() macros
+ * should do the right thing.
  */
+#ifdef __ASSEMBLY__
 
-#ifndef __ASSEMBLY__
+#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
+#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
+#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
+#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
+#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
+#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
+
+#else /* ! __ASSEMBLY__ */
 
 #include <linux/types.h>
 #include <linux/swab.h>
 
+#define ___opcode_swab32(x) swab32(x)
+#define ___opcode_swab16(x) swab16(x)
+#define ___opcode_swahb32(x) swahb32(x)
+#define ___opcode_swahw32(x) swahw32(x)
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___opcode_identity16(x) ((u16)(x))
+
+#endif /* ! __ASSEMBLY__ */
+
+
 #ifdef CONFIG_CPU_ENDIAN_BE8
-#define __opcode_to_mem_arm(x) swab32(x)
-#define __opcode_to_mem_thumb16(x) swab16(x)
-#define __opcode_to_mem_thumb32(x) swahb32(x)
-#else
-#define __opcode_to_mem_arm(x) ((u32)(x))
-#define __opcode_to_mem_thumb16(x) ((u16)(x))
-#define __opcode_to_mem_thumb32(x) swahw32(x)
+
+#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
+#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
+
+#else /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+/*
+ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
+ * work in all cases, due to alignment constraints.  For now, a correct
+ * version is not provided for BE32.
+ */
+#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
 #endif
 
+#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
+
 #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
 #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+#endif
 
 /* Operations specific to Thumb opcodes */
 
 /* Instruction size checks: */
-#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL)
-#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL)
+#define __opcode_is_thumb32(x) (		\
+	   ((x) & 0xF8000000) == 0xE8000000	\
+	|| ((x) & 0xF0000000) == 0xF0000000	\
+)
+#define __opcode_is_thumb16(x) (					\
+	   ((x) & 0xFFFF0000) == 0					\
+	&& !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000)	\
+)
 
 /* Operations to construct or split 32-bit Thumb instructions: */
-#define __opcode_thumb32_first(x) ((u16)((x) >> 16))
-#define __opcode_thumb32_second(x) ((u16)(x))
-#define __opcode_thumb32_compose(first, second) \
-	(((u32)(u16)(first) << 16) | (u32)(u16)(second))
+#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
+#define __opcode_thumb32_second(x) (___opcode_identity16(x))
+#define __opcode_thumb32_compose(first, second) (			\
+	  (___opcode_identity32(___opcode_identity16(first)) << 16)	\
+	| ___opcode_identity32(___opcode_identity16(second))		\
+)
+#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
+#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
+#define ___asm_opcode_thumb32_compose(first, second) (			    \
+	  (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
+	| ___asm_opcode_identity32(___asm_opcode_identity16(second))	    \
+)
 
-#endif /* __ASSEMBLY__ */
+/*
+ * Opcode injection helpers
+ *
+ * In rare cases it is necessary to assemble an opcode which the
+ * assembler does not support directly, or which would normally be
+ * rejected because of the CFLAGS or AFLAGS used to build the affected
+ * file.
+ *
+ * Before using these macros, consider carefully whether it is feasible
+ * instead to change the build flags for your file, or whether it really
+ * makes sense to support old assembler versions when building that
+ * particular kernel feature.
+ *
+ * The macros defined here should only be used where there is no viable
+ * alternative.
+ *
+ *
+ * __inst_arm(x): emit the specified ARM opcode
+ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
+ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
+ *
+ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
+ *	16-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
+ *	32-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ *
+ * Note that using these macros directly is poor practice.  Instead, you
+ * should use them to define human-readable wrapper macros to encode the
+ * instructions that you care about.  In code which might run on ARMv7 or
+ * above, you can usually use the __inst_arm_thumb{16,32} macros to
+ * specify the ARM and Thumb alternatives at the same time.  This ensures
+ * that the correct opcode gets emitted depending on the instruction set
+ * used for the kernel build.
+ *
+ * Look at opcodes-virt.h for an example of how to use these macros.
+ */
+#include <linux/stringify.h>
+
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+#define __inst_thumb32(x) ___inst_thumb32(				\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)),	\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x))	\
+)
+#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
+	__inst_thumb16(thumb_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
+	__inst_thumb32(thumb_opcode)
+#else
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#endif
+
+/* Helpers for the helpers.  Don't use these directly. */
+#ifdef __ASSEMBLY__
+#define ___inst_arm(x) .long x
+#define ___inst_thumb16(x) .short x
+#define ___inst_thumb32(first, second) .short first, second
+#else
+#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
+#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
+#define ___inst_thumb32(first, second) \
+	".short " __stringify(first) ", " __stringify(second) "\n\t"
+#endif
 
 #endif /* __ASM_ARM_OPCODES_H */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index ecf901902e44..812a4944e783 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -19,7 +19,7 @@
 
 #ifndef CONFIG_MMU
 
-#include "page-nommu.h"
+#include <asm/page-nommu.h>
 
 #else
 
diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h
deleted file mode 100644
index 8b24bf94c06b..000000000000
--- a/arch/arm/include/asm/param.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/param.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PARAM_H
-#define __ASM_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#else
-# define HZ		100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-/* max length of hostname */
-#define MAXHOSTNAMELEN  64
-
-#endif
-
diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h
deleted file mode 100644
index 26e94b09035a..000000000000
--- a/arch/arm/include/asm/parport.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
- *
- *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef __ASMARM_PARPORT_H
-#define __ASMARM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index e074948d8143..625cd621a436 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -12,6 +12,13 @@
 #ifndef __ARM_PERF_EVENT_H__
 #define __ARM_PERF_EVENT_H__
 
-/* Nothing to see here... */
+/*
+ * The ARMv7 CPU PMU supports up to 32 event counters.
+ */
+#define ARMPMU_MAX_HWEVENTS		32
+
+#define HW_OP_UNSUPPORTED		0xFFFF
+#define C(_x)				PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED		0xFFFF
 
 #endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index f66626d71e7d..08c12312a1f9 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -16,7 +16,7 @@
 #ifndef CONFIG_MMU
 
 #include <asm-generic/4level-fixup.h>
-#include "pgtable-nommu.h"
+#include <asm/pgtable-nommu.h>
 
 #else
 
@@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
+#define pte_special(pte)	(0)
+
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
 {
@@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
 		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+		ext |= PTE_EXT_NG;
 	}
-}
 
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte)	(0)
-
-#define pte_present_user(pte) \
-	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
-	 (L_PTE_PRESENT | L_PTE_USER))
+	set_pte_ext(ptep, pteval, ext);
+}
 
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
+ *   <--------------- offset ----------------------> < type -> 0 0 0
  *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 4432305f4a2a..a26170dce02e 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -16,69 +16,30 @@
 #include <linux/perf_event.h>
 
 /*
- * Types of PMUs that can be accessed directly and require mutual
- * exclusion between profiling tools.
- */
-enum arm_pmu_type {
-	ARM_PMU_DEVICE_CPU	= 0,
-	ARM_NUM_PMU_DEVICES,
-};
-
-/*
  * struct arm_pmu_platdata - ARM PMU platform data
  *
  * @handle_irq: an optional handler which will be called from the
  *	interrupt and passed the address of the low level handler,
  *	and can be used to implement any platform specific handling
  *	before or after calling it.
- * @enable_irq: an optional handler which will be called after
- *	request_irq and be used to handle some platform specific
- *	irq enablement
- * @disable_irq: an optional handler which will be called before
- *	free_irq and be used to handle some platform specific
- *	irq disablement
+ * @runtime_resume: an optional handler which will be called by the
+ *	runtime PM framework following a call to pm_runtime_get().
+ *	Note that if pm_runtime_get() is called more than once in
+ *	succession this handler will only be called once.
+ * @runtime_suspend: an optional handler which will be called by the
+ *	runtime PM framework following a call to pm_runtime_put().
+ *	Note that if pm_runtime_get() is called more than once in
+ *	succession this handler will only be called following the
+ *	final call to pm_runtime_put() that actually disables the
+ *	hardware.
  */
 struct arm_pmu_platdata {
 	irqreturn_t (*handle_irq)(int irq, void *dev,
 				  irq_handler_t pmu_handler);
-	void (*enable_irq)(int irq);
-	void (*disable_irq)(int irq);
+	int (*runtime_resume)(struct device *dev);
+	int (*runtime_suspend)(struct device *dev);
 };
 
-#ifdef CONFIG_CPU_HAS_PMU
-
-/**
- * reserve_pmu() - reserve the hardware performance counters
- *
- * Reserve the hardware performance counters in the system for exclusive use.
- * Returns 0 on success or -EBUSY if the lock is already held.
- */
-extern int
-reserve_pmu(enum arm_pmu_type type);
-
-/**
- * release_pmu() - Relinquish control of the performance counters
- *
- * Release the performance counters and allow someone else to use them.
- */
-extern void
-release_pmu(enum arm_pmu_type type);
-
-#else /* CONFIG_CPU_HAS_PMU */
-
-#include <linux/err.h>
-
-static inline int
-reserve_pmu(enum arm_pmu_type type)
-{
-	return -ENODEV;
-}
-
-static inline void
-release_pmu(enum arm_pmu_type type)	{ }
-
-#endif /* CONFIG_CPU_HAS_PMU */
-
 #ifdef CONFIG_HW_PERF_EVENTS
 
 /* The events for a given PMU register set. */
@@ -103,7 +64,6 @@ struct pmu_hw_events {
 
 struct arm_pmu {
 	struct pmu	pmu;
-	enum arm_pmu_type type;
 	cpumask_t	active_irqs;
 	char		*name;
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
@@ -118,6 +78,8 @@ struct arm_pmu {
 	void		(*start)(void);
 	void		(*stop)(void);
 	void		(*reset)(void *);
+	int		(*request_irq)(irq_handler_t handler);
+	void		(*free_irq)(void);
 	int		(*map_event)(struct perf_event *event);
 	int		num_events;
 	atomic_t	active_events;
@@ -129,7 +91,9 @@ struct arm_pmu {
 
 #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
 
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+extern const struct dev_pm_ops armpmu_dev_pm_ops;
+
+int armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
@@ -139,6 +103,13 @@ int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,
 			    int idx);
 
+int armpmu_map_event(struct perf_event *event,
+		     const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+		     const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+						[PERF_COUNT_HW_CACHE_OP_MAX]
+						[PERF_COUNT_HW_CACHE_RESULT_MAX],
+		     u32 raw_event_mask);
+
 #endif /* CONFIG_HW_PERF_EVENTS */
 
 #endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index e3f757263438..05b8e82ec9f5 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -10,5 +10,7 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
+extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
+		unsigned long rate);
 
 #endif
diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h
deleted file mode 100644
index 9e24c21f6304..000000000000
--- a/arch/arm/include/asm/segment.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARM_SEGMENT_H
-#define __ASM_ARM_SEGMENT_H
-
-#define __KERNEL_CS   0x0
-#define __KERNEL_DS   0x0
-
-#define __USER_CS     0x1
-#define __USER_DS     0x1
-
-#endif /* __ASM_ARM_SEGMENT_H */
-
diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h
deleted file mode 100644
index 1c0283954289..000000000000
--- a/arch/arm/include/asm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASMARM_SEMBUF_H
-#define _ASMARM_SEMBUF_H
-
-/* 
- * The semid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SEMBUF_H */
diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h
deleted file mode 100644
index ebb049091e26..000000000000
--- a/arch/arm/include/asm/serial.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/include/asm/serial.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   15-10-1996	RMK	Created
- */
-
-#ifndef __ASM_SERIAL_H
-#define __ASM_SERIAL_H
-
-#define BASE_BAUD	(1843200 / 16)
-
-#endif
diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h
deleted file mode 100644
index 2e5c67ba1c97..000000000000
--- a/arch/arm/include/asm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASMARM_SHMBUF_H
-#define _ASMARM_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SHMBUF_H */
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index ae29293270a3..2e3be16c6766 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -60,15 +60,6 @@ extern int boot_secondary(unsigned int cpu, struct task_struct *);
  */
 asmlinkage void secondary_start_kernel(void);
 
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initialize cpu_possible map, and enable coherency
- */
-extern void platform_smp_prepare_cpus(unsigned int);
 
 /*
  * Initial data for bringing up a secondary CPU.
@@ -79,18 +70,47 @@ struct secondary_data {
 	void *stack;
 };
 extern struct secondary_data secondary_data;
+extern volatile int pen_release;
 
 extern int __cpu_disable(void);
-extern int platform_cpu_disable(unsigned int cpu);
 
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void);
 
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
+struct smp_operations {
+#ifdef CONFIG_SMP
+	/*
+	 * Setup the set of possible CPUs (via set_cpu_possible)
+	 */
+	void (*smp_init_cpus)(void);
+	/*
+	 * Initialize cpu_possible map, and enable coherency
+	 */
+	void (*smp_prepare_cpus)(unsigned int max_cpus);
+
+	/*
+	 * Perform platform specific initialisation of the specified CPU.
+	 */
+	void (*smp_secondary_init)(unsigned int cpu);
+	/*
+	 * Boot a secondary CPU, and assign it the specified idle task.
+	 * This also gives us the initial stack to use for this CPU.
+	 */
+	int  (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle);
+#ifdef CONFIG_HOTPLUG_CPU
+	int  (*cpu_kill)(unsigned int cpu);
+	void (*cpu_die)(unsigned int cpu);
+	int  (*cpu_disable)(unsigned int cpu);
+#endif
+#endif
+};
+
+/*
+ * set platform specific SMP operations
+ */
+extern void smp_set_ops(struct smp_operations *);
+
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
deleted file mode 100644
index 6433cadb6ed4..000000000000
--- a/arch/arm/include/asm/socket.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _ASMARM_SOCKET_H
-#define _ASMARM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_PROTOCOL		38
-#define SO_DOMAIN		39
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-#endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h
deleted file mode 100644
index a2588a2512df..000000000000
--- a/arch/arm/include/asm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_ARM_SOCKIOS_H
-#define __ARCH_ARM_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h
new file mode 100644
index 000000000000..63479eecbf76
--- /dev/null
+++ b/arch/arm/include/asm/sync_bitops.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SYNC_BITOPS_H__
+#define __ASM_SYNC_BITOPS_H__
+
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+/* sync_bitops functions are equivalent to the SMP implementation of the
+ * original functions, independently from CONFIG_SMP being defined.
+ *
+ * We need them because _set_bit etc are not SMP safe if !CONFIG_SMP. But
+ * under Xen you might be communicating with a completely external entity
+ * who might be on another CPU (e.g. two uniprocessor guests communicating
+ * via event channels and grant tables). So we need a variant of the bit
+ * ops which are SMP safe even on a UP kernel.
+ */
+
+#define sync_set_bit(nr, p)		_set_bit(nr, p)
+#define sync_clear_bit(nr, p)		_clear_bit(nr, p)
+#define sync_change_bit(nr, p)		_change_bit(nr, p)
+#define sync_test_and_set_bit(nr, p)	_test_and_set_bit(nr, p)
+#define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
+#define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
+#define sync_test_bit(nr, addr)		test_bit(nr, addr)
+#define sync_cmpxchg			cmpxchg
+
+
+#endif
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index c334a23ddf75..9fdded6b1089 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -8,6 +8,11 @@
 #define _ASM_ARM_SYSCALL_H
 
 #include <linux/err.h>
+#include <linux/sched.h>
+
+#include <asm/unistd.h>
+
+#define NR_syscalls (__NR_syscalls)
 
 extern const unsigned long sys_call_table[];
 
diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h
deleted file mode 100644
index 704135d28d1d..000000000000
--- a/arch/arm/include/asm/termbits.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_ARM_TERMBITS_H
-#define __ASM_ARM_TERMBITS_H
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR    010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	   16
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-#define EXTPROC	0200000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h
deleted file mode 100644
index 293e3f1bc3f2..000000000000
--- a/arch/arm/include/asm/termios.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef __ASM_ARM_TERMIOS_H
-#define __ASM_ARM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
-	unsigned short __tmp;					\
-	get_user(__tmp,&(termio)->x);				\
-	*(unsigned short *) &(termios)->x = __tmp;		\
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index af7b0bda3355..f71cdab18b87 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -59,7 +59,9 @@ struct thread_info {
 	__u32			syscall;	/* syscall number */
 	__u8			used_cp[16];	/* thread used copro */
 	unsigned long		tp_value;
+#ifdef CONFIG_CRUNCH
 	struct crunch_state	crunchstate;
+#endif
 	union fp_state		fpstate __attribute__((aligned(8)));
 	union vfp_state		vfpstate;
 #ifdef CONFIG_ARM_THUMBEE
@@ -148,6 +150,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_TRACEPOINT	10
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
@@ -160,12 +163,13 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
 /* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index ce119442277c..83f2aa83899c 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -12,15 +12,13 @@
 #ifndef _ASMARM_TIMEX_H
 #define _ASMARM_TIMEX_H
 
-#include <asm/arch_timer.h>
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+#define CLOCK_TICK_RATE 1000000
+#else
 #include <mach/timex.h>
+#endif
 
 typedef unsigned long cycles_t;
-
-#ifdef ARCH_HAS_READ_CURRENT_TIMER
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
-#else
-#define get_cycles()	(0)
-#endif
 
 #endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 314d4664eae7..99a19512ee26 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
@@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
deleted file mode 100644
index 28beab917ffc..000000000000
--- a/arch/arm/include/asm/types.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#endif /* __KERNEL__ */
-
-#endif
-
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 479a6352e0b5..77bd79f2ffdb 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -101,28 +101,39 @@ extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
 
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+#define __GUP_CLOBBER_1	"lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2	"ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4	"lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
 
-#define get_user(x,p)							\
+#define __get_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
 		register unsigned long __r2 asm("r2");			\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
+			__get_user_x(__r2, __p, __e, __l, 1);		\
+			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			__get_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			__get_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
@@ -130,42 +141,57 @@ extern int __get_user_4(void *);
 		__e;							\
 	})
 
+#define get_user(x,p)							\
+	({								\
+		might_fault();						\
+		__get_user_check(x,p);					\
+	 })
+
 extern int __put_user_1(void *, unsigned int);
 extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__s)					\
+#define __put_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__put_user_" #__s				\
 		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
+		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
-#define put_user(x,p)							\
+#define __put_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
+			__put_user_x(__r2, __p, __e, __l, 1);		\
 			break;						\
 		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
+			__put_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
+			__put_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
+			__put_user_x(__r2, __p, __e, __l, 8);		\
 			break;						\
 		default: __e = __put_user_bad(); break;			\
 		}							\
 		__e;							\
 	})
 
+#define put_user(x,p)							\
+	({								\
+		might_fault();						\
+		__put_user_check(x,p);					\
+	 })
+
 #else /* CONFIG_MMU */
 
 /*
@@ -219,6 +245,7 @@ do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
 	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
@@ -300,6 +327,7 @@ do {									\
 	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
 	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
deleted file mode 100644
index 44593a894903..000000000000
--- a/arch/arm/include/asm/unaligned.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_ARM_UNALIGNED_H
-#define _ASM_ARM_UNALIGNED_H
-
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-/*
- * Select endianness
- */
-#ifndef __ARMEB__
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-#else
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-#endif
-
-#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0cab47d4a83f..d9ff5cc3a506 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -404,6 +404,15 @@
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
 #define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
 #define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
+					/* 378 for kcmp */
+
+/*
+ * This may need to be greater than __NR_last_syscall+1 in order to
+ * account for the padding in the syscall table
+ */
+#ifdef __KERNEL__
+#define __NR_syscalls  (380)
+#endif /* __KERNEL__ */
 
 /*
  * The following SWIs are ARM private.
@@ -483,6 +492,7 @@
  */
 #define __IGNORE_fadvise64_64
 #define __IGNORE_migrate_pages
+#define __IGNORE_kcmp
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 3d5fc41ae8d3..a7aadbd9a6dd 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -5,7 +5,7 @@
  */
 #include <asm/hwcap.h>
 
-#include "vfp.h"
+#include <asm/vfp.h>
 
 @ Macros to allow building with old toolkits (with no VFP support)
 	.macro	VFPFMRX, rd, sysreg, cond
diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h
new file mode 100644
index 000000000000..94b4e9020b02
--- /dev/null
+++ b/arch/arm/include/asm/xen/events.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_ARM_XEN_EVENTS_H
+#define _ASM_ARM_XEN_EVENTS_H
+
+#include <asm/ptrace.h>
+
+enum ipi_vector {
+	XEN_PLACEHOLDER_VECTOR,
+
+	/* Xen IPIs go here */
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return raw_irqs_disabled_flags(regs->ARM_cpsr);
+}
+
+#endif /* _ASM_ARM_XEN_EVENTS_H */
diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h
new file mode 100644
index 000000000000..8a823253d775
--- /dev/null
+++ b/arch/arm/include/asm/xen/hypercall.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_ARM_XEN_HYPERCALL_H
+#define _ASM_ARM_XEN_HYPERCALL_H
+
+#include <xen/interface/xen.h>
+
+long privcmd_call(unsigned call, unsigned long a1,
+		unsigned long a2, unsigned long a3,
+		unsigned long a4, unsigned long a5);
+int HYPERVISOR_xen_version(int cmd, void *arg);
+int HYPERVISOR_console_io(int cmd, int count, char *str);
+int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count);
+int HYPERVISOR_sched_op(int cmd, void *arg);
+int HYPERVISOR_event_channel_op(int cmd, void *arg);
+unsigned long HYPERVISOR_hvm_op(int op, void *arg);
+int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
+int HYPERVISOR_physdev_op(int cmd, void *arg);
+
+static inline void
+MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
+			unsigned int new_val, unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	BUG();
+}
+
+static inline int
+HYPERVISOR_multicall(void *call_list, int nr_calls)
+{
+	BUG();
+}
+#endif /* _ASM_ARM_XEN_HYPERCALL_H */
diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h
new file mode 100644
index 000000000000..d7ab99a0c9eb
--- /dev/null
+++ b/arch/arm/include/asm/xen/hypervisor.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_ARM_XEN_HYPERVISOR_H
+#define _ASM_ARM_XEN_HYPERVISOR_H
+
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+	PARAVIRT_LAZY_NONE,
+	PARAVIRT_LAZY_MMU,
+	PARAVIRT_LAZY_CPU,
+};
+
+static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
+{
+	return PARAVIRT_LAZY_NONE;
+}
+
+#endif /* _ASM_ARM_XEN_HYPERVISOR_H */
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
new file mode 100644
index 000000000000..ae05e56dd17d
--- /dev/null
+++ b/arch/arm/include/asm/xen/interface.h
@@ -0,0 +1,73 @@
+/******************************************************************************
+ * Guest OS interface to ARM Xen.
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ */
+
+#ifndef _ASM_ARM_XEN_INTERFACE_H
+#define _ASM_ARM_XEN_INTERFACE_H
+
+#include <linux/types.h>
+
+#define uint64_aligned_t uint64_t __attribute__((aligned(8)))
+
+#define __DEFINE_GUEST_HANDLE(name, type) \
+	typedef struct { union { type *p; uint64_aligned_t q; }; }  \
+        __guest_handle_ ## name
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name) \
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)        __guest_handle_ ## name
+
+#define set_xen_guest_handle(hnd, val)			\
+	do {						\
+		if (sizeof(hnd) == 8)			\
+			*(uint64_t *)&(hnd) = 0;	\
+		(hnd).p = val;				\
+	} while (0)
+
+#ifndef __ASSEMBLY__
+/* Explicitly size integers that represent pfns in the interface with
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests. */
+typedef uint64_t xen_pfn_t;
+typedef uint64_t xen_ulong_t;
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint,  unsigned int);
+__DEFINE_GUEST_HANDLE(ulong, unsigned long);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(long);
+DEFINE_GUEST_HANDLE(void);
+DEFINE_GUEST_HANDLE(uint64_t);
+DEFINE_GUEST_HANDLE(uint32_t);
+DEFINE_GUEST_HANDLE(xen_pfn_t);
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 1
+
+struct arch_vcpu_info { };
+struct arch_shared_info { };
+
+/* TODO: Move pvclock definitions some place arch independent */
+struct pvclock_vcpu_time_info {
+	u32   version;
+	u32   pad0;
+	u64   tsc_timestamp;
+	u64   system_time;
+	u32   tsc_to_system_mul;
+	s8    tsc_shift;
+	u8    flags;
+	u8    pad[2];
+} __attribute__((__packed__)); /* 32 bytes */
+
+/* It is OK to have a 12 bytes struct with no padding because it is packed */
+struct pvclock_wall_clock {
+	u32   version;
+	u32   sec;
+	u32   nsec;
+} __attribute__((__packed__));
+#endif
+
+#endif /* _ASM_ARM_XEN_INTERFACE_H */
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
new file mode 100644
index 000000000000..174202318dff
--- /dev/null
+++ b/arch/arm/include/asm/xen/page.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_ARM_XEN_PAGE_H
+#define _ASM_ARM_XEN_PAGE_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include <linux/pfn.h>
+#include <linux/types.h>
+
+#include <xen/interface/grant_table.h>
+
+#define pfn_to_mfn(pfn)			(pfn)
+#define phys_to_machine_mapping_valid	(1)
+#define mfn_to_pfn(mfn)			(mfn)
+#define mfn_to_virt(m)			(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+#define pte_mfn	    pte_pfn
+#define mfn_pte	    pfn_pte
+
+/* Xen machine address */
+typedef struct xmaddr {
+	phys_addr_t maddr;
+} xmaddr_t;
+
+/* Xen pseudo-physical address */
+typedef struct xpaddr {
+	phys_addr_t paddr;
+} xpaddr_t;
+
+#define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
+#define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
+
+static inline xmaddr_t phys_to_machine(xpaddr_t phys)
+{
+	unsigned offset = phys.paddr & ~PAGE_MASK;
+	return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
+}
+
+static inline xpaddr_t machine_to_phys(xmaddr_t machine)
+{
+	unsigned offset = machine.maddr & ~PAGE_MASK;
+	return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
+}
+/* VIRT <-> MACHINE conversion */
+#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
+#define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
+#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr)
+{
+	/* TODO: assuming it is mapped in the kernel 1:1 */
+	return virt_to_machine(vaddr);
+}
+
+/* TODO: this shouldn't be here but it is because the frontend drivers
+ * are using it (its rolled in headers) even though we won't hit the code path.
+ * So for right now just punt with this.
+ */
+static inline pte_t *lookup_address(unsigned long address, unsigned int *level)
+{
+	BUG();
+	return NULL;
+}
+
+static inline int m2p_add_override(unsigned long mfn, struct page *page,
+		struct gnttab_map_grant_ref *kmap_op)
+{
+	return 0;
+}
+
+static inline int m2p_remove_override(struct page *page, bool clear_pte)
+{
+	return 0;
+}
+
+static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	BUG();
+	return false;
+}
+#endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/include/debug/highbank.S
index cb57fe5bcd04..8cad4322a5a2 100644
--- a/arch/arm/mach-highbank/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/highbank.S
@@ -10,10 +10,8 @@
  */
 
 		.macro	addruart,rp,rv,tmp
-		movw	\rv, #0x6000
-		movt	\rv, #0xfee3
-		movw	\rp, #0x6000
-		movt	\rp, #0xfff3
+		ldr	\rv, =0xfee36000
+		ldr	\rp, =0xfff36000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/icedcc.S b/arch/arm/include/debug/icedcc.S
new file mode 100644
index 000000000000..43afcb021fa3
--- /dev/null
+++ b/arch/arm/include/debug/icedcc.S
@@ -0,0 +1,90 @@
+/*
+ *  arch/arm/include/debug/icedcc.S
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+		@@ debug using ARM EmbeddedICE DCC channel
+
+		.macro	addruart, rp, rv, tmp
+		.endm
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		bne	1001b
+1002:
+		.endm
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c8, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x10000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		bne	1001b
+1002:
+		.endm
+
+#else
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c1, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		beq	1001b
+
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		bne	1001b
+1002:
+		.endm
+
+#endif	/* CONFIG_CPU_V6 */
diff --git a/arch/arm/mach-mvebu/include/mach/debug-macro.S b/arch/arm/include/debug/mvebu.S
index 22825760c7e1..865c6d02b332 100644
--- a/arch/arm/mach-mvebu/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/mvebu.S
@@ -11,7 +11,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/armada-370-xp.h>
+#define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
+#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =ARMADA_370_XP_REGS_PHYS_BASE
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/include/debug/picoxcell.S
index 58d4ee3ae949..7419deb1b948 100644
--- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/picoxcell.S
@@ -9,10 +9,10 @@
  * accesses to the 8250.
  */
 #include <linux/serial_reg.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
 
 #define UART_SHIFT 2
+#define PICOXCELL_UART1_BASE		0x80230000
+#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
 
 		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
diff --git a/arch/arm/mach-socfpga/include/mach/debug-macro.S b/arch/arm/include/debug/socfpga.S
index d6f26d23374f..d6f26d23374f 100644
--- a/arch/arm/mach-socfpga/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/socfpga.S
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/include/debug/vexpress.S
index 9f509f55d078..9f509f55d078 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/vexpress.S
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 7ad2d5cf7008..5dfef9d97ed9 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -19,9 +19,10 @@ obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
 		   process.o ptrace.o return_address.o sched_clock.o \
 		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
 
-obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
+obj-$(CONFIG_ATAGS)		+= atags_parse.o
+obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
+obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
 
-obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
@@ -52,7 +53,6 @@ test-kprobes-objs		+= kprobes-test-thumb.o
 else
 test-kprobes-objs		+= kprobes-test-arm.o
 endif
-obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
@@ -69,8 +69,7 @@ obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
-obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index cf258807160d..c8ef20747ee7 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -21,18 +21,28 @@
 #include <linux/io.h>
 
 #include <asm/cputype.h>
+#include <asm/delay.h>
 #include <asm/localtimer.h>
 #include <asm/arch_timer.h>
 #include <asm/system_info.h>
 #include <asm/sched_clock.h>
 
 static unsigned long arch_timer_rate;
-static int arch_timer_ppi;
-static int arch_timer_ppi2;
+
+enum ppi_nr {
+	PHYS_SECURE_PPI,
+	PHYS_NONSECURE_PPI,
+	VIRT_PPI,
+	HYP_PPI,
+	MAX_TIMER_PPI
+};
+
+static int arch_timer_ppi[MAX_TIMER_PPI];
 
 static struct clock_event_device __percpu **arch_timer_evt;
+static struct delay_timer arch_delay_timer;
 
-extern void init_current_timer_delay(unsigned long freq);
+static bool arch_timer_use_virtual = true;
 
 /*
  * Architected system timer support.
@@ -46,50 +56,104 @@ extern void init_current_timer_delay(unsigned long freq);
 #define ARCH_TIMER_REG_FREQ		1
 #define ARCH_TIMER_REG_TVAL		2
 
-static void arch_timer_reg_write(int reg, u32 val)
+#define ARCH_TIMER_PHYS_ACCESS		0
+#define ARCH_TIMER_VIRT_ACCESS		1
+
+/*
+ * These register accessors are marked inline so the compiler can
+ * nicely work out which register we want, and chuck away the rest of
+ * the code. At least it does so with a recent GCC (4.6.3).
+ */
+static inline void arch_timer_reg_write(const int access, const int reg, u32 val)
 {
-	switch (reg) {
-	case ARCH_TIMER_REG_CTRL:
-		asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
-		break;
-	case ARCH_TIMER_REG_TVAL:
-		asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
-		break;
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
+			break;
+		}
+	}
+
+	if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val));
+			break;
+		}
 	}
 
 	isb();
 }
 
-static u32 arch_timer_reg_read(int reg)
+static inline u32 arch_timer_reg_read(const int access, const int reg)
 {
-	u32 val;
+	u32 val = 0;
+
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_FREQ:
+			asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
+			break;
+		}
+	}
 
-	switch (reg) {
-	case ARCH_TIMER_REG_CTRL:
-		asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
-		break;
-	case ARCH_TIMER_REG_FREQ:
-		asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
-		break;
-	case ARCH_TIMER_REG_TVAL:
-		asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
-		break;
-	default:
-		BUG();
+	if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val));
+			break;
+		}
 	}
 
 	return val;
 }
 
-static irqreturn_t arch_timer_handler(int irq, void *dev_id)
+static inline cycle_t arch_timer_counter_read(const int access)
 {
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
-	unsigned long ctrl;
+	cycle_t cval = 0;
+
+	if (access == ARCH_TIMER_PHYS_ACCESS)
+		asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
+
+	if (access == ARCH_TIMER_VIRT_ACCESS)
+		asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval));
+
+	return cval;
+}
+
+static inline cycle_t arch_counter_get_cntpct(void)
+{
+	return arch_timer_counter_read(ARCH_TIMER_PHYS_ACCESS);
+}
 
-	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+static inline cycle_t arch_counter_get_cntvct(void)
+{
+	return arch_timer_counter_read(ARCH_TIMER_VIRT_ACCESS);
+}
+
+static irqreturn_t inline timer_handler(const int access,
+					struct clock_event_device *evt)
+{
+	unsigned long ctrl;
+	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
 	if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
 		ctrl |= ARCH_TIMER_CTRL_IT_MASK;
-		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+		arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
 		evt->event_handler(evt);
 		return IRQ_HANDLED;
 	}
@@ -97,63 +161,100 @@ static irqreturn_t arch_timer_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static void arch_timer_disable(void)
+static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id)
 {
-	unsigned long ctrl;
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
 
-	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
-	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
-	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+	return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt);
 }
 
-static void arch_timer_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk)
+static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
 {
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+	return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
+}
+
+static inline void timer_set_mode(const int access, int mode)
+{
+	unsigned long ctrl;
 	switch (mode) {
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		arch_timer_disable();
+		ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+		ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+		arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
 		break;
 	default:
 		break;
 	}
 }
 
-static int arch_timer_set_next_event(unsigned long evt,
-				     struct clock_event_device *unused)
+static void arch_timer_set_mode_virt(enum clock_event_mode mode,
+				     struct clock_event_device *clk)
 {
-	unsigned long ctrl;
+	timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode);
+}
 
-	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+static void arch_timer_set_mode_phys(enum clock_event_mode mode,
+				     struct clock_event_device *clk)
+{
+	timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode);
+}
+
+static inline void set_next_event(const int access, unsigned long evt)
+{
+	unsigned long ctrl;
+	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
 	ctrl |= ARCH_TIMER_CTRL_ENABLE;
 	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+	arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt);
+	arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+}
 
-	arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
-	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+static int arch_timer_set_next_event_virt(unsigned long evt,
+					  struct clock_event_device *unused)
+{
+	set_next_event(ARCH_TIMER_VIRT_ACCESS, evt);
+	return 0;
+}
 
+static int arch_timer_set_next_event_phys(unsigned long evt,
+					  struct clock_event_device *unused)
+{
+	set_next_event(ARCH_TIMER_PHYS_ACCESS, evt);
 	return 0;
 }
 
 static int __cpuinit arch_timer_setup(struct clock_event_device *clk)
 {
-	/* Be safe... */
-	arch_timer_disable();
-
 	clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
 	clk->name = "arch_sys_timer";
 	clk->rating = 450;
-	clk->set_mode = arch_timer_set_mode;
-	clk->set_next_event = arch_timer_set_next_event;
-	clk->irq = arch_timer_ppi;
+	if (arch_timer_use_virtual) {
+		clk->irq = arch_timer_ppi[VIRT_PPI];
+		clk->set_mode = arch_timer_set_mode_virt;
+		clk->set_next_event = arch_timer_set_next_event_virt;
+	} else {
+		clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
+		clk->set_mode = arch_timer_set_mode_phys;
+		clk->set_next_event = arch_timer_set_next_event_phys;
+	}
+
+	clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL);
 
 	clockevents_config_and_register(clk, arch_timer_rate,
 					0xf, 0x7fffffff);
 
 	*__this_cpu_ptr(arch_timer_evt) = clk;
 
-	enable_percpu_irq(clk->irq, 0);
-	if (arch_timer_ppi2)
-		enable_percpu_irq(arch_timer_ppi2, 0);
+	if (arch_timer_use_virtual)
+		enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0);
+	else {
+		enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0);
+		if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+			enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0);
+	}
 
 	return 0;
 }
@@ -173,8 +274,8 @@ static int arch_timer_available(void)
 		return -ENXIO;
 
 	if (arch_timer_rate == 0) {
-		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
-		freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
+		freq = arch_timer_reg_read(ARCH_TIMER_PHYS_ACCESS,
+					   ARCH_TIMER_REG_FREQ);
 
 		/* Check the timer frequency. */
 		if (freq == 0) {
@@ -185,52 +286,57 @@ static int arch_timer_available(void)
 		arch_timer_rate = freq;
 	}
 
-	pr_info_once("Architected local timer running at %lu.%02luMHz.\n",
-		     arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
+	pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n",
+		     arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100,
+		     arch_timer_use_virtual ? "virt" : "phys");
 	return 0;
 }
 
-static inline cycle_t arch_counter_get_cntpct(void)
+static u32 notrace arch_counter_get_cntpct32(void)
 {
-	u32 cvall, cvalh;
-
-	asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
+	cycle_t cnt = arch_counter_get_cntpct();
 
-	return ((cycle_t) cvalh << 32) | cvall;
-}
-
-static inline cycle_t arch_counter_get_cntvct(void)
-{
-	u32 cvall, cvalh;
-
-	asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
-
-	return ((cycle_t) cvalh << 32) | cvall;
+	/*
+	 * The sched_clock infrastructure only knows about counters
+	 * with at most 32bits. Forget about the upper 24 bits for the
+	 * time being...
+	 */
+	return (u32)cnt;
 }
 
 static u32 notrace arch_counter_get_cntvct32(void)
 {
-	cycle_t cntvct = arch_counter_get_cntvct();
+	cycle_t cnt = arch_counter_get_cntvct();
 
 	/*
 	 * The sched_clock infrastructure only knows about counters
 	 * with at most 32bits. Forget about the upper 24 bits for the
 	 * time being...
 	 */
-	return (u32)(cntvct & (u32)~0);
+	return (u32)cnt;
 }
 
 static cycle_t arch_counter_read(struct clocksource *cs)
 {
+	/*
+	 * Always use the physical counter for the clocksource.
+	 * CNTHCTL.PL1PCTEN must be set to 1.
+	 */
 	return arch_counter_get_cntpct();
 }
 
-int read_current_timer(unsigned long *timer_val)
+static unsigned long arch_timer_read_current_timer(void)
 {
-	if (!arch_timer_rate)
-		return -ENXIO;
-	*timer_val = arch_counter_get_cntpct();
-	return 0;
+	return arch_counter_get_cntpct();
+}
+
+static cycle_t arch_counter_read_cc(const struct cyclecounter *cc)
+{
+	/*
+	 * Always use the physical counter for the clocksource.
+	 * CNTHCTL.PL1PCTEN must be set to 1.
+	 */
+	return arch_counter_get_cntpct();
 }
 
 static struct clocksource clocksource_counter = {
@@ -241,14 +347,32 @@ static struct clocksource clocksource_counter = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static struct cyclecounter cyclecounter = {
+	.read	= arch_counter_read_cc,
+	.mask	= CLOCKSOURCE_MASK(56),
+};
+
+static struct timecounter timecounter;
+
+struct timecounter *arch_timer_get_timecounter(void)
+{
+	return &timecounter;
+}
+
 static void __cpuinit arch_timer_stop(struct clock_event_device *clk)
 {
 	pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
 		 clk->irq, smp_processor_id());
-	disable_percpu_irq(clk->irq);
-	if (arch_timer_ppi2)
-		disable_percpu_irq(arch_timer_ppi2);
-	arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+
+	if (arch_timer_use_virtual)
+		disable_percpu_irq(arch_timer_ppi[VIRT_PPI]);
+	else {
+		disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]);
+		if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+			disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
+	}
+
+	clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk);
 }
 
 static struct local_timer_ops arch_timer_ops __cpuinitdata = {
@@ -261,36 +385,48 @@ static struct clock_event_device arch_timer_global_evt;
 static int __init arch_timer_register(void)
 {
 	int err;
+	int ppi;
 
 	err = arch_timer_available();
 	if (err)
-		return err;
+		goto out;
 
 	arch_timer_evt = alloc_percpu(struct clock_event_device *);
-	if (!arch_timer_evt)
-		return -ENOMEM;
+	if (!arch_timer_evt) {
+		err = -ENOMEM;
+		goto out;
+	}
 
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+	cyclecounter.mult = clocksource_counter.mult;
+	cyclecounter.shift = clocksource_counter.shift;
+	timecounter_init(&timecounter, &cyclecounter,
+			 arch_counter_get_cntpct());
+
+	if (arch_timer_use_virtual) {
+		ppi = arch_timer_ppi[VIRT_PPI];
+		err = request_percpu_irq(ppi, arch_timer_handler_virt,
+					 "arch_timer", arch_timer_evt);
+	} else {
+		ppi = arch_timer_ppi[PHYS_SECURE_PPI];
+		err = request_percpu_irq(ppi, arch_timer_handler_phys,
+					 "arch_timer", arch_timer_evt);
+		if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) {
+			ppi = arch_timer_ppi[PHYS_NONSECURE_PPI];
+			err = request_percpu_irq(ppi, arch_timer_handler_phys,
+						 "arch_timer", arch_timer_evt);
+			if (err)
+				free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+						arch_timer_evt);
+		}
+	}
 
-	err = request_percpu_irq(arch_timer_ppi, arch_timer_handler,
-				 "arch_timer", arch_timer_evt);
 	if (err) {
 		pr_err("arch_timer: can't register interrupt %d (%d)\n",
-		       arch_timer_ppi, err);
+		       ppi, err);
 		goto out_free;
 	}
 
-	if (arch_timer_ppi2) {
-		err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler,
-					 "arch_timer", arch_timer_evt);
-		if (err) {
-			pr_err("arch_timer: can't register interrupt %d (%d)\n",
-			       arch_timer_ppi2, err);
-			arch_timer_ppi2 = 0;
-			goto out_free_irq;
-		}
-	}
-
 	err = local_timer_register(&arch_timer_ops);
 	if (err) {
 		/*
@@ -302,21 +438,29 @@ static int __init arch_timer_register(void)
 		arch_timer_global_evt.cpumask = cpumask_of(0);
 		err = arch_timer_setup(&arch_timer_global_evt);
 	}
-
 	if (err)
 		goto out_free_irq;
 
-	init_current_timer_delay(arch_timer_rate);
+	/* Use the architected timer for the delay loop. */
+	arch_delay_timer.read_current_timer = &arch_timer_read_current_timer;
+	arch_delay_timer.freq = arch_timer_rate;
+	register_current_timer_delay(&arch_delay_timer);
 	return 0;
 
 out_free_irq:
-	free_percpu_irq(arch_timer_ppi, arch_timer_evt);
-	if (arch_timer_ppi2)
-		free_percpu_irq(arch_timer_ppi2, arch_timer_evt);
+	if (arch_timer_use_virtual)
+		free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt);
+	else {
+		free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI],
+				arch_timer_evt);
+		if (arch_timer_ppi[PHYS_NONSECURE_PPI])
+			free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI],
+					arch_timer_evt);
+	}
 
 out_free:
 	free_percpu(arch_timer_evt);
-
+out:
 	return err;
 }
 
@@ -329,6 +473,7 @@ int __init arch_timer_of_register(void)
 {
 	struct device_node *np;
 	u32 freq;
+	int i;
 
 	np = of_find_matching_node(NULL, arch_timer_of_match);
 	if (!np) {
@@ -340,22 +485,40 @@ int __init arch_timer_of_register(void)
 	if (!of_property_read_u32(np, "clock-frequency", &freq))
 		arch_timer_rate = freq;
 
-	arch_timer_ppi = irq_of_parse_and_map(np, 0);
-	arch_timer_ppi2 = irq_of_parse_and_map(np, 1);
-	pr_info("arch_timer: found %s irqs %d %d\n",
-		np->name, arch_timer_ppi, arch_timer_ppi2);
+	for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+		arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
+	/*
+	 * If no interrupt provided for virtual timer, we'll have to
+	 * stick to the physical timer. It'd better be accessible...
+	 */
+	if (!arch_timer_ppi[VIRT_PPI]) {
+		arch_timer_use_virtual = false;
+
+		if (!arch_timer_ppi[PHYS_SECURE_PPI] ||
+		    !arch_timer_ppi[PHYS_NONSECURE_PPI]) {
+			pr_warn("arch_timer: No interrupt available, giving up\n");
+			return -EINVAL;
+		}
+	}
 
 	return arch_timer_register();
 }
 
 int __init arch_timer_sched_clock_init(void)
 {
+	u32 (*cnt32)(void);
 	int err;
 
 	err = arch_timer_available();
 	if (err)
 		return err;
 
-	setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate);
+	if (arch_timer_use_virtual)
+		cnt32 = arch_counter_get_cntvct32;
+	else
+		cnt32 = arch_counter_get_cntpct32;
+
+	setup_sched_clock(cnt32, 32, arch_timer_rate);
 	return 0;
 }
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 1429d8989fb9..c985b481192c 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -59,10 +59,12 @@ int main(void)
   DEFINE(TI_USED_CP,		offsetof(struct thread_info, used_cp));
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
+#ifdef CONFIG_VFP
   DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
 #ifdef CONFIG_SMP
   DEFINE(VFP_CPU,		offsetof(union vfp_state, hard.cpu));
 #endif
+#endif
 #ifdef CONFIG_ARM_THUMBEE
   DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
 #endif
diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h
index e5f028d214a1..9edc9692332d 100644
--- a/arch/arm/kernel/atags.h
+++ b/arch/arm/kernel/atags.h
@@ -3,3 +3,17 @@ extern void save_atags(struct tag *tags);
 #else
 static inline void save_atags(struct tag *tags) { }
 #endif
+
+void convert_to_tag_list(struct tag *tags);
+
+#ifdef CONFIG_ATAGS
+struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr);
+#else
+static inline struct machine_desc *
+setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+{
+	early_print("no ATAGS support: can't continue\n");
+	while (true);
+	unreachable();
+}
+#endif
diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/atags_compat.c
index 925652318b8b..5236ad38f417 100644
--- a/arch/arm/kernel/compat.c
+++ b/arch/arm/kernel/atags_compat.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/kernel/compat.c
+ *  linux/arch/arm/kernel/atags_compat.c
  *
  *  Copyright (C) 2001 Russell King
  *
@@ -26,7 +26,7 @@
 
 #include <asm/mach/arch.h>
 
-#include "compat.h"
+#include "atags.h"
 
 /*
  * Usage:
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
new file mode 100644
index 000000000000..14512e6931d8
--- /dev/null
+++ b/arch/arm/kernel/atags_parse.c
@@ -0,0 +1,238 @@
+/*
+ * Tag parsing.
+ *
+ * Copyright (C) 1995-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This is the traditional way of passing data to the kernel at boot time.  Rather
+ * than passing a fixed inflexible structure to the kernel, we pass a list
+ * of variable-sized tags to the kernel.  The first tag must be a ATAG_CORE
+ * tag for the list to be recognised (to distinguish the tagged list from
+ * a param_struct).  The list is terminated with a zero-length tag (this tag
+ * is not parsed in any way).
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/root_dev.h>
+#include <linux/screen_info.h>
+
+#include <asm/setup.h>
+#include <asm/system_info.h>
+#include <asm/page.h>
+#include <asm/mach/arch.h>
+
+#include "atags.h"
+
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+
+#ifndef MEM_SIZE
+#define MEM_SIZE	(16*1024*1024)
+#endif
+
+static struct {
+	struct tag_header hdr1;
+	struct tag_core   core;
+	struct tag_header hdr2;
+	struct tag_mem32  mem;
+	struct tag_header hdr3;
+} default_tags __initdata = {
+	{ tag_size(tag_core), ATAG_CORE },
+	{ 1, PAGE_SIZE, 0xff },
+	{ tag_size(tag_mem32), ATAG_MEM },
+	{ MEM_SIZE },
+	{ 0, ATAG_NONE }
+};
+
+static int __init parse_tag_core(const struct tag *tag)
+{
+	if (tag->hdr.size > 2) {
+		if ((tag->u.core.flags & 1) == 0)
+			root_mountflags &= ~MS_RDONLY;
+		ROOT_DEV = old_decode_dev(tag->u.core.rootdev);
+	}
+	return 0;
+}
+
+__tagtable(ATAG_CORE, parse_tag_core);
+
+static int __init parse_tag_mem32(const struct tag *tag)
+{
+	return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
+}
+
+__tagtable(ATAG_MEM, parse_tag_mem32);
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+static int __init parse_tag_videotext(const struct tag *tag)
+{
+	screen_info.orig_x            = tag->u.videotext.x;
+	screen_info.orig_y            = tag->u.videotext.y;
+	screen_info.orig_video_page   = tag->u.videotext.video_page;
+	screen_info.orig_video_mode   = tag->u.videotext.video_mode;
+	screen_info.orig_video_cols   = tag->u.videotext.video_cols;
+	screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
+	screen_info.orig_video_lines  = tag->u.videotext.video_lines;
+	screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
+	screen_info.orig_video_points = tag->u.videotext.video_points;
+	return 0;
+}
+
+__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext);
+#endif
+
+#ifdef CONFIG_BLK_DEV_RAM
+static int __init parse_tag_ramdisk(const struct tag *tag)
+{
+	extern int rd_size, rd_image_start, rd_prompt, rd_doload;
+
+	rd_image_start = tag->u.ramdisk.start;
+	rd_doload = (tag->u.ramdisk.flags & 1) == 0;
+	rd_prompt = (tag->u.ramdisk.flags & 2) == 0;
+
+	if (tag->u.ramdisk.size)
+		rd_size = tag->u.ramdisk.size;
+
+	return 0;
+}
+
+__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
+#endif
+
+static int __init parse_tag_serialnr(const struct tag *tag)
+{
+	system_serial_low = tag->u.serialnr.low;
+	system_serial_high = tag->u.serialnr.high;
+	return 0;
+}
+
+__tagtable(ATAG_SERIAL, parse_tag_serialnr);
+
+static int __init parse_tag_revision(const struct tag *tag)
+{
+	system_rev = tag->u.revision.rev;
+	return 0;
+}
+
+__tagtable(ATAG_REVISION, parse_tag_revision);
+
+static int __init parse_tag_cmdline(const struct tag *tag)
+{
+#if defined(CONFIG_CMDLINE_EXTEND)
+	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
+	strlcat(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#elif defined(CONFIG_CMDLINE_FORCE)
+	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
+#else
+	strlcpy(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#endif
+	return 0;
+}
+
+__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+
+/*
+ * Scan the tag table for this tag, and call its parse function.
+ * The tag table is built by the linker from all the __tagtable
+ * declarations.
+ */
+static int __init parse_tag(const struct tag *tag)
+{
+	extern struct tagtable __tagtable_begin, __tagtable_end;
+	struct tagtable *t;
+
+	for (t = &__tagtable_begin; t < &__tagtable_end; t++)
+		if (tag->hdr.tag == t->tag) {
+			t->parse(tag);
+			break;
+		}
+
+	return t < &__tagtable_end;
+}
+
+/*
+ * Parse all tags in the list, checking both the global and architecture
+ * specific tag tables.
+ */
+static void __init parse_tags(const struct tag *t)
+{
+	for (; t->hdr.size; t = tag_next(t))
+		if (!parse_tag(t))
+			printk(KERN_WARNING
+				"Ignoring unrecognised tag 0x%08x\n",
+				t->hdr.tag);
+}
+
+static void __init squash_mem_tags(struct tag *tag)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM)
+			tag->hdr.tag = ATAG_NONE;
+}
+
+struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer,
+						unsigned int machine_nr)
+{
+	struct tag *tags = (struct tag *)&default_tags;
+	struct machine_desc *mdesc = NULL, *p;
+	char *from = default_command_line;
+
+	default_tags.mem.start = PHYS_OFFSET;
+
+	/*
+	 * locate machine in the list of supported machines.
+	 */
+	for_each_machine_desc(p)
+		if (machine_nr == p->nr) {
+			printk("Machine: %s\n", p->name);
+			mdesc = p;
+			break;
+		}
+
+	if (!mdesc) {
+		early_print("\nError: unrecognized/unsupported machine ID"
+			    " (r1 = 0x%08x).\n\n", machine_nr);
+		dump_machine_table(); /* does not return */
+	}
+
+	if (__atags_pointer)
+		tags = phys_to_virt(__atags_pointer);
+	else if (mdesc->atag_offset)
+		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
+
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
+	/*
+	 * If we have the old style parameters, convert them to
+	 * a tag list.
+	 */
+	if (tags->hdr.tag != ATAG_CORE)
+		convert_to_tag_list(tags);
+#endif
+	if (tags->hdr.tag != ATAG_CORE) {
+		early_print("Warning: Neither atags nor dtb found\n");
+		tags = (struct tag *)&default_tags;
+	}
+
+	if (mdesc->fixup)
+		mdesc->fixup(tags, &from, &meminfo);
+
+	if (tags->hdr.tag == ATAG_CORE) {
+		if (meminfo.nr_banks != 0)
+			squash_mem_tags(tags);
+		save_atags(tags);
+		parse_tags(tags);
+	}
+
+	/* parse_early_param needs a boot_command_line */
+	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+	return mdesc;
+}
diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags_proc.c
index 42a1a1415fa6..42a1a1415fa6 100644
--- a/arch/arm/kernel/atags.c
+++ b/arch/arm/kernel/atags_proc.c
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 2b2f25e7fef5..9b722612553d 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/pci.h>
 
 static int debug_pci;
@@ -270,15 +271,6 @@ static void __devinit pci_fixup_it8152(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
 
-
-
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	if (debug_pci)
-		printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev));
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 /*
  * If the bus contains any of these devices, then we must not turn on
  * parity checking of any kind.  Currently this is CyberPro 20x0 only.
@@ -423,6 +415,38 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
+static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+{
+	int ret;
+	struct pci_host_bridge_window *window;
+
+	if (list_empty(&sys->resources)) {
+		pci_add_resource_offset(&sys->resources,
+			 &iomem_resource, sys->mem_offset);
+	}
+
+	list_for_each_entry(window, &sys->resources, list) {
+		if (resource_type(window->res) == IORESOURCE_IO)
+			return 0;
+	}
+
+	sys->io_res.start = (busnr * SZ_64K) ?  : pcibios_min_io;
+	sys->io_res.end = (busnr + 1) * SZ_64K - 1;
+	sys->io_res.flags = IORESOURCE_IO;
+	sys->io_res.name = sys->io_res_name;
+	sprintf(sys->io_res_name, "PCI%d I/O", busnr);
+
+	ret = request_resource(&ioport_resource, &sys->io_res);
+	if (ret) {
+		pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);
+		return ret;
+	}
+	pci_add_resource_offset(&sys->resources, &sys->io_res,
+				sys->io_offset);
+
+	return 0;
+}
+
 static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
 {
 	struct pci_sys_data *sys = NULL;
@@ -445,11 +469,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
 		ret = hw->setup(nr, sys);
 
 		if (ret > 0) {
-			if (list_empty(&sys->resources)) {
-				pci_add_resource_offset(&sys->resources,
-					 &ioport_resource, sys->io_offset);
-				pci_add_resource_offset(&sys->resources,
-					 &iomem_resource, sys->mem_offset);
+			ret = pcibios_init_resources(nr, sys);
+			if (ret)  {
+				kfree(sys);
+				break;
 			}
 
 			if (hw->scan)
@@ -627,3 +650,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 
 	return 0;
 }
+
+void __init pci_map_io_early(unsigned long pfn)
+{
+	struct map_desc pci_io_desc = {
+		.virtual	= PCI_IO_VIRT_BASE,
+		.type		= MT_DEVICE,
+		.length		= SZ_64K,
+	};
+
+	pci_io_desc.pfn = pfn;
+	iotable_init(&pci_io_desc, 1);
+}
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 463ff4a0ec8a..e337879595e5 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -387,6 +387,7 @@
 /* 375 */	CALL(sys_setns)
 		CALL(sys_process_vm_readv)
 		CALL(sys_process_vm_writev)
+		CALL(sys_ni_syscall)	/* reserved for sys_kcmp */
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h
deleted file mode 100644
index 39264ab1b9c6..000000000000
--- a/arch/arm/kernel/compat.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- *  linux/arch/arm/kernel/compat.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void convert_to_tag_list(struct tag *tags);
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index c45522c36787..66f711b2e0e8 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -20,90 +20,9 @@
  * references to these in a production kernel!
  */
 
-#if defined(CONFIG_DEBUG_ICEDCC)
-		@@ debug using ARM EmbeddedICE DCC channel
-
-		.macro	addruart, rp, rv, tmp
-		.endm
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c0, c5, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c0, c1, 0
-		tst	\rx, #0x20000000
-		beq	1001b
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x2000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c0, c1, 0
-		tst	\rx, #0x20000000
-		bne	1001b
-1002:
-		.endm
-
-#elif defined(CONFIG_CPU_XSCALE)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c8, c0, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c14, c0, 0
-		tst	\rx, #0x10000000
-		beq	1001b
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x10000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c14, c0, 0
-		tst	\rx, #0x10000000
-		bne	1001b
-1002:
-		.endm
-
-#else
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c1, c0, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c0, c0, 0
-		tst	\rx, #2
-		beq	1001b
-
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x2000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c0, c0, 0
-		tst	\rx, #2
-		bne	1001b
-1002:
-		.endm
-
-#endif	/* CONFIG_CPU_V6 */
-
-#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include <mach/debug-macro.S>
-#endif	/* CONFIG_DEBUG_ICEDCC */
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
 
 #ifdef CONFIG_MMU
 		.macro	addruart_current, rx, tmp1, tmp2
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 978eac57e04a..f45987037bf1 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -94,6 +94,15 @@ ENDPROC(ret_from_fork)
 	.equ NR_syscalls,0
 #define CALL(x) .equ NR_syscalls,NR_syscalls+1
 #include "calls.S"
+
+/*
+ * Ensure that the system call table is equal to __NR_syscalls,
+ * which is the value the rest of the system sees
+ */
+.ifne NR_syscalls - __NR_syscalls
+.error "__NR_syscalls is not equal to the size of the syscall table"
+.endif
+
 #undef CALL
 #define CALL(x) .long x
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 3db960e20cb8..9874d0741191 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -23,8 +23,8 @@
 #include <asm/thread_info.h>
 #include <asm/pgtable.h>
 
-#ifdef CONFIG_DEBUG_LL
-#include <mach/debug-macro.S>
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
 #endif
 
 /*
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index ba386bd94107..281bf3301241 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -159,6 +159,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 		/* Aligned */
 		break;
 	case 1:
-		/* Allow single byte watchpoint. */
-		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
-			break;
 	case 2:
 		/* Allow halfword watchpoints and breakpoints. */
 		if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
 			break;
+	case 3:
+		/* Allow single byte watchpoint. */
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+			break;
 	default:
 		ret = -EINVAL;
 		goto out;
@@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
deleted file mode 100644
index 1911dae19e4f..000000000000
--- a/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- *  Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/string.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
-	const char	name[8];
-	int		on;
-	int		off;
-};
-
-static const struct leds_evt_name evt_names[] = {
-	{ "amber", led_amber_on, led_amber_off },
-	{ "blue",  led_blue_on,  led_blue_off  },
-	{ "green", led_green_on, led_green_off },
-	{ "red",   led_red_on,   led_red_off   },
-};
-
-static ssize_t leds_store(struct device *dev,
-			struct device_attribute *attr,
-			const char *buf, size_t size)
-{
-	int ret = -EINVAL, len = strcspn(buf, " ");
-
-	if (len > 0 && buf[len] == '\0')
-		len--;
-
-	if (strncmp(buf, "claim", len) == 0) {
-		leds_event(led_claim);
-		ret = size;
-	} else if (strncmp(buf, "release", len) == 0) {
-		leds_event(led_release);
-		ret = size;
-	} else {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
-			if (strlen(evt_names[i].name) != len ||
-			    strncmp(buf, evt_names[i].name, len) != 0)
-				continue;
-			if (strncmp(buf+len, " on", 3) == 0) {
-				leds_event(evt_names[i].on);
-				ret = size;
-			} else if (strncmp(buf+len, " off", 4) == 0) {
-				leds_event(evt_names[i].off);
-				ret = size;
-			}
-			break;
-		}
-	}
-	return ret;
-}
-
-static DEVICE_ATTR(event, 0200, NULL, leds_store);
-
-static struct bus_type leds_subsys = {
-	.name		= "leds",
-	.dev_name	= "leds",
-};
-
-static struct device leds_device = {
-	.id		= 0,
-	.bus		= &leds_subsys,
-};
-
-static int leds_suspend(void)
-{
-	leds_event(led_stop);
-	return 0;
-}
-
-static void leds_resume(void)
-{
-	leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
-	leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
-	.shutdown	= leds_shutdown,
-	.suspend	= leds_suspend,
-	.resume		= leds_resume,
-};
-
-static int __init leds_init(void)
-{
-	int ret;
-	ret = subsys_system_register(&leds_subsys, NULL);
-	if (ret == 0)
-		ret = device_register(&leds_device);
-	if (ret == 0)
-		ret = device_create_file(&leds_device, &dev_attr_event);
-	if (ret == 0)
-		register_syscore_ops(&leds_syscore_ops);
-	return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index dfcdb9f7c126..e29c3337ca81 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -8,7 +8,9 @@
 #include <linux/reboot.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 #include <asm/pgtable.h>
+#include <linux/of_fdt.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
@@ -32,6 +34,29 @@ static atomic_t waiting_for_crash_ipi;
 
 int machine_kexec_prepare(struct kimage *image)
 {
+	struct kexec_segment *current_segment;
+	__be32 header;
+	int i, err;
+
+	/*
+	 * No segment at default ATAGs address. try to locate
+	 * a dtb using magic.
+	 */
+	for (i = 0; i < image->nr_segments; i++) {
+		current_segment = &image->segment[i];
+
+		err = memblock_is_region_memory(current_segment->mem,
+						current_segment->memsz);
+		if (err)
+			return - EINVAL;
+
+		err = get_user(header, (__be32*)current_segment->buf);
+		if (err)
+			return err;
+
+		if (be32_to_cpu(header) == OF_DT_HEADER)
+			kexec_boot_atags = current_segment->mem;
+	}
 	return 0;
 }
 
@@ -122,7 +147,9 @@ void machine_kexec(struct kimage *image)
 	kexec_start_address = image->start;
 	kexec_indirection_page = page_list;
 	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+	if (!kexec_boot_atags)
+		kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
 
 	/* copy our kernel relocation code to the control code page */
 	memcpy(reboot_code_buffer,
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index ab243b87118d..93971b1a4f0b 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -12,68 +12,15 @@
  */
 #define pr_fmt(fmt) "hw perfevents: " fmt
 
-#include <linux/bitmap.h>
-#include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/perf_event.h>
 #include <linux/platform_device.h>
-#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
 #include <linux/uaccess.h>
 
-#include <asm/cputype.h>
-#include <asm/irq.h>
 #include <asm/irq_regs.h>
 #include <asm/pmu.h>
 #include <asm/stacktrace.h>
 
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
- * another platform that supports more, we need to increase this to be the
- * largest of all platforms.
- *
- * ARMv7 supports up to 32 events:
- *  cycle counter CCNT + 31 events counters CNT0..30.
- *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
- */
-#define ARMPMU_MAX_HWEVENTS		32
-
-static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
-static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-/* Set at runtime when we know what CPU type we are. */
-static struct arm_pmu *cpu_pmu;
-
-const char *perf_pmu_name(void)
-{
-	if (!cpu_pmu)
-		return NULL;
-
-	return cpu_pmu->pmu.name;
-}
-EXPORT_SYMBOL_GPL(perf_pmu_name);
-
-int perf_num_counters(void)
-{
-	int max_events = 0;
-
-	if (cpu_pmu != NULL)
-		max_events = cpu_pmu->num_events;
-
-	return max_events;
-}
-EXPORT_SYMBOL_GPL(perf_num_counters);
-
-#define HW_OP_UNSUPPORTED		0xFFFF
-
-#define C(_x) \
-	PERF_COUNT_HW_CACHE_##_x
-
-#define CACHE_OP_UNSUPPORTED		0xFFFF
-
 static int
 armpmu_map_cache_event(const unsigned (*cache_map)
 				      [PERF_COUNT_HW_CACHE_MAX]
@@ -104,7 +51,7 @@ armpmu_map_cache_event(const unsigned (*cache_map)
 }
 
 static int
-armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
+armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
 {
 	int mapping = (*event_map)[config];
 	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
@@ -116,19 +63,20 @@ armpmu_map_raw_event(u32 raw_event_mask, u64 config)
 	return (int)(config & raw_event_mask);
 }
 
-static int map_cpu_event(struct perf_event *event,
-			 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
-			 const unsigned (*cache_map)
-					[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX],
-			 u32 raw_event_mask)
+int
+armpmu_map_event(struct perf_event *event,
+		 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+		 const unsigned (*cache_map)
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX],
+		 u32 raw_event_mask)
 {
 	u64 config = event->attr.config;
 
 	switch (event->attr.type) {
 	case PERF_TYPE_HARDWARE:
-		return armpmu_map_event(event_map, config);
+		return armpmu_map_hw_event(event_map, config);
 	case PERF_TYPE_HW_CACHE:
 		return armpmu_map_cache_event(cache_map, config);
 	case PERF_TYPE_RAW:
@@ -222,7 +170,6 @@ armpmu_stop(struct perf_event *event, int flags)
 	 */
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
-		barrier(); /* why? */
 		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
@@ -350,99 +297,41 @@ validate_group(struct perf_event *event)
 	return 0;
 }
 
-static irqreturn_t armpmu_platform_irq(int irq, void *dev)
+static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 {
 	struct arm_pmu *armpmu = (struct arm_pmu *) dev;
 	struct platform_device *plat_device = armpmu->plat_device;
 	struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
 
-	return plat->handle_irq(irq, dev, armpmu->handle_irq);
+	if (plat && plat->handle_irq)
+		return plat->handle_irq(irq, dev, armpmu->handle_irq);
+	else
+		return armpmu->handle_irq(irq, dev);
 }
 
 static void
 armpmu_release_hardware(struct arm_pmu *armpmu)
 {
-	int i, irq, irqs;
-	struct platform_device *pmu_device = armpmu->plat_device;
-	struct arm_pmu_platdata *plat =
-		dev_get_platdata(&pmu_device->dev);
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-
-	for (i = 0; i < irqs; ++i) {
-		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
-			continue;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0) {
-			if (plat && plat->disable_irq)
-				plat->disable_irq(irq);
-			free_irq(irq, armpmu);
-		}
-	}
-
-	release_pmu(armpmu->type);
+	armpmu->free_irq();
+	pm_runtime_put_sync(&armpmu->plat_device->dev);
 }
 
 static int
 armpmu_reserve_hardware(struct arm_pmu *armpmu)
 {
-	struct arm_pmu_platdata *plat;
-	irq_handler_t handle_irq;
-	int i, err, irq, irqs;
+	int err;
 	struct platform_device *pmu_device = armpmu->plat_device;
 
 	if (!pmu_device)
 		return -ENODEV;
 
-	err = reserve_pmu(armpmu->type);
+	pm_runtime_get_sync(&pmu_device->dev);
+	err = armpmu->request_irq(armpmu_dispatch_irq);
 	if (err) {
-		pr_warning("unable to reserve pmu\n");
+		armpmu_release_hardware(armpmu);
 		return err;
 	}
 
-	plat = dev_get_platdata(&pmu_device->dev);
-	if (plat && plat->handle_irq)
-		handle_irq = armpmu_platform_irq;
-	else
-		handle_irq = armpmu->handle_irq;
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-	if (irqs < 1) {
-		pr_err("no irqs for PMUs defined\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < irqs; ++i) {
-		err = 0;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq < 0)
-			continue;
-
-		/*
-		 * If we have a single PMU interrupt that we can't shift,
-		 * assume that we're running on a uniprocessor machine and
-		 * continue. Otherwise, continue without this interrupt.
-		 */
-		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
-			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
-				    irq, i);
-			continue;
-		}
-
-		err = request_irq(irq, handle_irq,
-				  IRQF_DISABLED | IRQF_NOBALANCING,
-				  "arm-pmu", armpmu);
-		if (err) {
-			pr_err("unable to request IRQ%d for ARM PMU counters\n",
-				irq);
-			armpmu_release_hardware(armpmu);
-			return err;
-		} else if (plat && plat->enable_irq)
-			plat->enable_irq(irq);
-
-		cpumask_set_cpu(i, &armpmu->active_irqs);
-	}
-
 	return 0;
 }
 
@@ -581,6 +470,32 @@ static void armpmu_disable(struct pmu *pmu)
 	armpmu->stop();
 }
 
+#ifdef CONFIG_PM_RUNTIME
+static int armpmu_runtime_resume(struct device *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+	if (plat && plat->runtime_resume)
+		return plat->runtime_resume(dev);
+
+	return 0;
+}
+
+static int armpmu_runtime_suspend(struct device *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+	if (plat && plat->runtime_suspend)
+		return plat->runtime_suspend(dev);
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops armpmu_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL)
+};
+
 static void __init armpmu_init(struct arm_pmu *armpmu)
 {
 	atomic_set(&armpmu->active_events, 0);
@@ -598,174 +513,14 @@ static void __init armpmu_init(struct arm_pmu *armpmu)
 	};
 }
 
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+int armpmu_register(struct arm_pmu *armpmu, char *name, int type)
 {
 	armpmu_init(armpmu);
+	pr_info("enabled with %s PMU driver, %d counters available\n",
+			armpmu->name, armpmu->num_events);
 	return perf_pmu_register(&armpmu->pmu, name, type);
 }
 
-/* Include the PMU-specific implementations. */
-#include "perf_event_xscale.c"
-#include "perf_event_v6.c"
-#include "perf_event_v7.c"
-
-/*
- * Ensure the PMU has sane values out of reset.
- * This requires SMP to be available, so exists as a separate initcall.
- */
-static int __init
-cpu_pmu_reset(void)
-{
-	if (cpu_pmu && cpu_pmu->reset)
-		return on_each_cpu(cpu_pmu->reset, NULL, 1);
-	return 0;
-}
-arch_initcall(cpu_pmu_reset);
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static struct of_device_id armpmu_of_device_ids[] = {
-	{.compatible = "arm,cortex-a9-pmu"},
-	{.compatible = "arm,cortex-a8-pmu"},
-	{.compatible = "arm,arm1136-pmu"},
-	{.compatible = "arm,arm1176-pmu"},
-	{},
-};
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
-	{.name = "arm-pmu"},
-	{},
-};
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
-	if (!cpu_pmu)
-		return -ENODEV;
-
-	cpu_pmu->plat_device = pdev;
-	return 0;
-}
-
-static struct platform_driver armpmu_driver = {
-	.driver		= {
-		.name	= "arm-pmu",
-		.of_match_table = armpmu_of_device_ids,
-	},
-	.probe		= armpmu_device_probe,
-	.id_table	= armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
-	return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-static struct pmu_hw_events *armpmu_get_cpu_events(void)
-{
-	return &__get_cpu_var(cpu_hw_events);
-}
-
-static void __init cpu_pmu_init(struct arm_pmu *armpmu)
-{
-	int cpu;
-	for_each_possible_cpu(cpu) {
-		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
-		events->events = per_cpu(hw_events, cpu);
-		events->used_mask = per_cpu(used_mask, cpu);
-		raw_spin_lock_init(&events->pmu_lock);
-	}
-	armpmu->get_hw_events = armpmu_get_cpu_events;
-	armpmu->type = ARM_PMU_DEVICE_CPU;
-}
-
-/*
- * PMU hardware loses all context when a CPU goes offline.
- * When a CPU is hotplugged back in, since some hardware registers are
- * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
- * junk values out of them.
- */
-static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
-					unsigned long action, void *hcpu)
-{
-	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
-		return NOTIFY_DONE;
-
-	if (cpu_pmu && cpu_pmu->reset)
-		cpu_pmu->reset(NULL);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
-	.notifier_call = pmu_cpu_notify,
-};
-
-/*
- * CPU PMU identification and registration.
- */
-static int __init
-init_hw_perf_events(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
-	unsigned long part_number = (cpuid & 0xFFF0);
-
-	/* ARM Ltd CPUs. */
-	if (0x41 == implementor) {
-		switch (part_number) {
-		case 0xB360:	/* ARM1136 */
-		case 0xB560:	/* ARM1156 */
-		case 0xB760:	/* ARM1176 */
-			cpu_pmu = armv6pmu_init();
-			break;
-		case 0xB020:	/* ARM11mpcore */
-			cpu_pmu = armv6mpcore_pmu_init();
-			break;
-		case 0xC080:	/* Cortex-A8 */
-			cpu_pmu = armv7_a8_pmu_init();
-			break;
-		case 0xC090:	/* Cortex-A9 */
-			cpu_pmu = armv7_a9_pmu_init();
-			break;
-		case 0xC050:	/* Cortex-A5 */
-			cpu_pmu = armv7_a5_pmu_init();
-			break;
-		case 0xC0F0:	/* Cortex-A15 */
-			cpu_pmu = armv7_a15_pmu_init();
-			break;
-		case 0xC070:	/* Cortex-A7 */
-			cpu_pmu = armv7_a7_pmu_init();
-			break;
-		}
-	/* Intel CPUs [xscale]. */
-	} else if (0x69 == implementor) {
-		part_number = (cpuid >> 13) & 0x7;
-		switch (part_number) {
-		case 1:
-			cpu_pmu = xscale1pmu_init();
-			break;
-		case 2:
-			cpu_pmu = xscale2pmu_init();
-			break;
-		}
-	}
-
-	if (cpu_pmu) {
-		pr_info("enabled with %s PMU driver, %d counters available\n",
-			cpu_pmu->name, cpu_pmu->num_events);
-		cpu_pmu_init(cpu_pmu);
-		register_cpu_notifier(&pmu_cpu_notifier);
-		armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
-	} else {
-		pr_info("no hardware support available\n");
-	}
-
-	return 0;
-}
-early_initcall(init_hw_perf_events);
-
 /*
  * Callchain handling code.
  */
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
new file mode 100644
index 000000000000..8d7d8d4de9d6
--- /dev/null
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -0,0 +1,295 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+#define pr_fmt(fmt) "CPU PMU: " fmt
+
+#include <linux/bitmap.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <asm/cputype.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+
+/* Set at runtime when we know what CPU type we are. */
+static struct arm_pmu *cpu_pmu;
+
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
+
+/*
+ * Despite the names, these two functions are CPU-specific and are used
+ * by the OProfile/perf code.
+ */
+const char *perf_pmu_name(void)
+{
+	if (!cpu_pmu)
+		return NULL;
+
+	return cpu_pmu->pmu.name;
+}
+EXPORT_SYMBOL_GPL(perf_pmu_name);
+
+int perf_num_counters(void)
+{
+	int max_events = 0;
+
+	if (cpu_pmu != NULL)
+		max_events = cpu_pmu->num_events;
+
+	return max_events;
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
+
+static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
+{
+	return &__get_cpu_var(cpu_hw_events);
+}
+
+static void cpu_pmu_free_irq(void)
+{
+	int i, irq, irqs;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+	for (i = 0; i < irqs; ++i) {
+		if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
+			continue;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq >= 0)
+			free_irq(irq, cpu_pmu);
+	}
+}
+
+static int cpu_pmu_request_irq(irq_handler_t handler)
+{
+	int i, err, irq, irqs;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+	if (!pmu_device)
+		return -ENODEV;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+	if (irqs < 1) {
+		pr_err("no irqs for PMUs defined\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < irqs; ++i) {
+		err = 0;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq < 0)
+			continue;
+
+		/*
+		 * If we have a single PMU interrupt that we can't shift,
+		 * assume that we're running on a uniprocessor machine and
+		 * continue. Otherwise, continue without this interrupt.
+		 */
+		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+				    irq, i);
+			continue;
+		}
+
+		err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu",
+				  cpu_pmu);
+		if (err) {
+			pr_err("unable to request IRQ%d for ARM PMU counters\n",
+				irq);
+			return err;
+		}
+
+		cpumask_set_cpu(i, &cpu_pmu->active_irqs);
+	}
+
+	return 0;
+}
+
+static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	int cpu;
+	for_each_possible_cpu(cpu) {
+		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+		events->events = per_cpu(hw_events, cpu);
+		events->used_mask = per_cpu(used_mask, cpu);
+		raw_spin_lock_init(&events->pmu_lock);
+	}
+
+	cpu_pmu->get_hw_events	= cpu_pmu_get_cpu_events;
+	cpu_pmu->request_irq	= cpu_pmu_request_irq;
+	cpu_pmu->free_irq	= cpu_pmu_free_irq;
+
+	/* Ensure the PMU has sane values out of reset. */
+	if (cpu_pmu && cpu_pmu->reset)
+		on_each_cpu(cpu_pmu->reset, NULL, 1);
+}
+
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
+				    unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
+	.notifier_call = cpu_pmu_notify,
+};
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
+	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
+	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
+	{.compatible = "arm,cortex-a7-pmu",	.data = armv7_a7_pmu_init},
+	{.compatible = "arm,cortex-a5-pmu",	.data = armv7_a5_pmu_init},
+	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
+	{.compatible = "arm,arm1176-pmu",	.data = armv6pmu_init},
+	{.compatible = "arm,arm1136-pmu",	.data = armv6pmu_init},
+	{},
+};
+
+static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+	{.name = "arm-pmu"},
+	{},
+};
+
+/*
+ * CPU PMU identification and probing.
+ */
+static struct arm_pmu *__devinit probe_current_pmu(void)
+{
+	struct arm_pmu *pmu = NULL;
+	int cpu = get_cpu();
+	unsigned long cpuid = read_cpuid_id();
+	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+	unsigned long part_number = (cpuid & 0xFFF0);
+
+	pr_info("probing PMU on CPU %d\n", cpu);
+
+	/* ARM Ltd CPUs. */
+	if (0x41 == implementor) {
+		switch (part_number) {
+		case 0xB360:	/* ARM1136 */
+		case 0xB560:	/* ARM1156 */
+		case 0xB760:	/* ARM1176 */
+			pmu = armv6pmu_init();
+			break;
+		case 0xB020:	/* ARM11mpcore */
+			pmu = armv6mpcore_pmu_init();
+			break;
+		case 0xC080:	/* Cortex-A8 */
+			pmu = armv7_a8_pmu_init();
+			break;
+		case 0xC090:	/* Cortex-A9 */
+			pmu = armv7_a9_pmu_init();
+			break;
+		case 0xC050:	/* Cortex-A5 */
+			pmu = armv7_a5_pmu_init();
+			break;
+		case 0xC0F0:	/* Cortex-A15 */
+			pmu = armv7_a15_pmu_init();
+			break;
+		case 0xC070:	/* Cortex-A7 */
+			pmu = armv7_a7_pmu_init();
+			break;
+		}
+	/* Intel CPUs [xscale]. */
+	} else if (0x69 == implementor) {
+		part_number = (cpuid >> 13) & 0x7;
+		switch (part_number) {
+		case 1:
+			pmu = xscale1pmu_init();
+			break;
+		case 2:
+			pmu = xscale2pmu_init();
+			break;
+		}
+	}
+
+	put_cpu();
+	return pmu;
+}
+
+static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	struct arm_pmu *(*init_fn)(void);
+	struct device_node *node = pdev->dev.of_node;
+
+	if (cpu_pmu) {
+		pr_info("attempt to register multiple PMU devices!");
+		return -ENOSPC;
+	}
+
+	if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) {
+		init_fn = of_id->data;
+		cpu_pmu = init_fn();
+	} else {
+		cpu_pmu = probe_current_pmu();
+	}
+
+	if (!cpu_pmu)
+		return -ENODEV;
+
+	cpu_pmu->plat_device = pdev;
+	cpu_pmu_init(cpu_pmu);
+	register_cpu_notifier(&cpu_pmu_hotplug_notifier);
+	armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
+
+	return 0;
+}
+
+static struct platform_driver cpu_pmu_driver = {
+	.driver		= {
+		.name	= "arm-pmu",
+		.pm	= &armpmu_dev_pm_ops,
+		.of_match_table = cpu_pmu_of_device_ids,
+	},
+	.probe		= cpu_pmu_device_probe,
+	.id_table	= cpu_pmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+	return platform_driver_register(&cpu_pmu_driver);
+}
+device_initcall(register_pmu_driver);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index c90fcb2b6967..6ccc07971745 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -645,7 +645,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
 
 static int armv6_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv6_perf_map,
+	return armpmu_map_event(event, &armv6_perf_map,
 				&armv6_perf_cache_map, 0xFF);
 }
 
@@ -664,7 +664,7 @@ static struct arm_pmu armv6pmu = {
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__devinit armv6pmu_init(void)
 {
 	return &armv6pmu;
 }
@@ -679,7 +679,7 @@ static struct arm_pmu *__init armv6pmu_init(void)
 
 static int armv6mpcore_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv6mpcore_perf_map,
+	return armpmu_map_event(event, &armv6mpcore_perf_map,
 				&armv6mpcore_perf_cache_map, 0xFF);
 }
 
@@ -698,17 +698,17 @@ static struct arm_pmu armv6mpcore_pmu = {
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__devinit armv6mpcore_pmu_init(void)
 {
 	return &armv6mpcore_pmu;
 }
 #else
-static struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__devinit armv6pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__devinit armv6mpcore_pmu_init(void)
 {
 	return NULL;
 }
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index f04070bd2183..bd4b090ebcfd 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -1204,31 +1204,31 @@ static void armv7pmu_reset(void *info)
 
 static int armv7_a8_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a8_perf_map,
+	return armpmu_map_event(event, &armv7_a8_perf_map,
 				&armv7_a8_perf_cache_map, 0xFF);
 }
 
 static int armv7_a9_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a9_perf_map,
+	return armpmu_map_event(event, &armv7_a9_perf_map,
 				&armv7_a9_perf_cache_map, 0xFF);
 }
 
 static int armv7_a5_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a5_perf_map,
+	return armpmu_map_event(event, &armv7_a5_perf_map,
 				&armv7_a5_perf_cache_map, 0xFF);
 }
 
 static int armv7_a15_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a15_perf_map,
+	return armpmu_map_event(event, &armv7_a15_perf_map,
 				&armv7_a15_perf_cache_map, 0xFF);
 }
 
 static int armv7_a7_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &armv7_a7_perf_map,
+	return armpmu_map_event(event, &armv7_a7_perf_map,
 				&armv7_a7_perf_cache_map, 0xFF);
 }
 
@@ -1245,7 +1245,7 @@ static struct arm_pmu armv7pmu = {
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static u32 __init armv7_read_num_pmnc_events(void)
+static u32 __devinit armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
@@ -1256,7 +1256,7 @@ static u32 __init armv7_read_num_pmnc_events(void)
 	return nb_cnt + 1;
 }
 
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a8_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A8";
 	armv7pmu.map_event	= armv7_a8_map_event;
@@ -1264,7 +1264,7 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void)
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a9_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A9";
 	armv7pmu.map_event	= armv7_a9_map_event;
@@ -1272,7 +1272,7 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void)
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a5_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A5";
 	armv7pmu.map_event	= armv7_a5_map_event;
@@ -1280,7 +1280,7 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void)
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a15_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A15";
 	armv7pmu.map_event	= armv7_a15_map_event;
@@ -1289,7 +1289,7 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void)
 	return &armv7pmu;
 }
 
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a7_pmu_init(void)
 {
 	armv7pmu.name		= "ARMv7 Cortex-A7";
 	armv7pmu.map_event	= armv7_a7_map_event;
@@ -1298,27 +1298,27 @@ static struct arm_pmu *__init armv7_a7_pmu_init(void)
 	return &armv7pmu;
 }
 #else
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a8_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a9_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a5_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a15_pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
+static struct arm_pmu *__devinit armv7_a7_pmu_init(void)
 {
 	return NULL;
 }
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index f759fe0bab63..426e19f380a2 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -430,7 +430,7 @@ xscale1pmu_write_counter(int counter, u32 val)
 
 static int xscale_map_event(struct perf_event *event)
 {
-	return map_cpu_event(event, &xscale_perf_map,
+	return armpmu_map_event(event, &xscale_perf_map,
 				&xscale_perf_cache_map, 0xFF);
 }
 
@@ -449,7 +449,7 @@ static struct arm_pmu xscale1pmu = {
 	.max_period	= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__devinit xscale1pmu_init(void)
 {
 	return &xscale1pmu;
 }
@@ -816,17 +816,17 @@ static struct arm_pmu xscale2pmu = {
 	.max_period	= (1LLU << 32) - 1,
 };
 
-static struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__devinit xscale2pmu_init(void)
 {
 	return &xscale2pmu;
 }
 #else
-static struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__devinit xscale1pmu_init(void)
 {
 	return NULL;
 }
 
-static struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__devinit xscale2pmu_init(void)
 {
 	return NULL;
 }
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
deleted file mode 100644
index 2334bf8a650a..000000000000
--- a/arch/arm/kernel/pmu.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/arch/arm/kernel/pmu.c
- *
- *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- *  Copyright (C) 2010 ARM Ltd, Will Deacon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/pmu.h>
-
-/*
- * PMU locking to ensure mutual exclusion between different subsystems.
- */
-static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-
-int
-reserve_pmu(enum arm_pmu_type type)
-{
-	return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
-}
-EXPORT_SYMBOL_GPL(reserve_pmu);
-
-void
-release_pmu(enum arm_pmu_type type)
-{
-	clear_bit_unlock(type, pmu_lock);
-}
-EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 693b744fd572..04eea22d7958 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -31,9 +31,9 @@
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/cpuidle.h>
+#include <linux/leds.h>
 
 #include <asm/cacheflush.h>
-#include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/thread_notify.h>
 #include <asm/stacktrace.h>
@@ -189,7 +189,7 @@ void cpu_idle(void)
 	while (1) {
 		tick_nohz_idle_enter();
 		rcu_idle_enter();
-		leds_event(led_idle_start);
+		ledtrig_cpu(CPU_LED_IDLE_START);
 		while (!need_resched()) {
 #ifdef CONFIG_HOTPLUG_CPU
 			if (cpu_is_offline(smp_processor_id()))
@@ -220,7 +220,7 @@ void cpu_idle(void)
 			} else
 				local_irq_enable();
 		}
-		leds_event(led_idle_end);
+		ledtrig_cpu(CPU_LED_IDLE_END);
 		rcu_idle_exit();
 		tick_nohz_idle_exit();
 		schedule_preempt_disabled();
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3e0fc5f7ed4b..739db3a1b2d2 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -30,6 +30,9 @@
 #include <asm/pgtable.h>
 #include <asm/traps.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 #define REG_PC	15
 #define REG_PSR	16
 /*
@@ -918,11 +921,11 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno,
 {
 	unsigned long ip;
 
+	current_thread_info()->syscall = scno;
+
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return scno;
 
-	current_thread_info()->syscall = scno;
-
 	/*
 	 * IP is used to denote syscall entry/exit:
 	 * IP = 0 -> entry, =1 -> exit
@@ -941,15 +944,19 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno,
 
 asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
 {
-	int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER);
+	scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER);
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, scno);
 	audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1,
 			    regs->ARM_r2, regs->ARM_r3);
-	return ret;
+	return scno;
 }
 
 asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno)
 {
-	int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT);
+	scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT);
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, scno);
 	audit_syscall_exit(regs);
-	return ret;
+	return scno;
 }
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 27d186abbc06..e21bac20d90d 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
+#include <linux/moduleparam.h>
 #include <linux/sched.h>
 #include <linux/syscore_ops.h>
 #include <linux/timer.h>
@@ -21,10 +22,15 @@ struct clock_data {
 	u32 epoch_cyc_copy;
 	u32 mult;
 	u32 shift;
+	bool suspended;
+	bool needs_suspend;
 };
 
 static void sched_clock_poll(unsigned long wrap_ticks);
 static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
+static int irqtime = -1;
+
+core_param(irqtime, irqtime, int, 0400);
 
 static struct clock_data cd = {
 	.mult	= NSEC_PER_SEC / HZ,
@@ -49,6 +55,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
 	u64 epoch_ns;
 	u32 epoch_cyc;
 
+	if (cd.suspended)
+		return cd.epoch_ns;
+
 	/*
 	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
 	 * ensuring that we always write epoch_cyc, epoch_ns and
@@ -98,6 +107,13 @@ static void sched_clock_poll(unsigned long wrap_ticks)
 	update_sched_clock();
 }
 
+void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
+		unsigned long rate)
+{
+	setup_sched_clock(read, bits, rate);
+	cd.needs_suspend = true;
+}
+
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -145,6 +161,10 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 	 */
 	cd.epoch_ns = 0;
 
+	/* Enable IRQ time accounting if we have a fast enough sched_clock */
+	if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
+		enable_sched_clock_irqtime();
+
 	pr_debug("Registered %pF as sched_clock source\n", read);
 }
 
@@ -169,11 +189,23 @@ void __init sched_clock_postinit(void)
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
+	if (cd.needs_suspend)
+		cd.suspended = true;
 	return 0;
 }
 
+static void sched_clock_resume(void)
+{
+	if (cd.needs_suspend) {
+		cd.epoch_cyc = read_sched_clock();
+		cd.epoch_cyc_copy = cd.epoch_cyc;
+		cd.suspended = false;
+	}
+}
+
 static struct syscore_ops sched_clock_ops = {
 	.suspend = sched_clock_suspend,
+	.resume = sched_clock_resume,
 };
 
 static int __init sched_clock_syscore_init(void)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index a81dcecc7343..febafa0f552d 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -21,11 +21,9 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
-#include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
-#include <linux/fs.h>
 #include <linux/proc_fs.h>
 #include <linux/memblock.h>
 #include <linux/bug.h>
@@ -56,15 +54,9 @@
 #include <asm/unwind.h>
 #include <asm/memblock.h>
 
-#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
-#include "compat.h"
-#endif
 #include "atags.h"
 #include "tcm.h"
 
-#ifndef MEM_SIZE
-#define MEM_SIZE	(16*1024*1024)
-#endif
 
 #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
 char fpe_type[8];
@@ -145,7 +137,6 @@ static const char *machine_name;
 static char __initdata cmd_line[COMMAND_LINE_SIZE];
 struct machine_desc *machine_desc __initdata;
 
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
 #define ENDIANNESS ((char)endian_test.l)
 
@@ -583,21 +574,6 @@ static int __init early_mem(char *p)
 }
 early_param("mem", early_mem);
 
-static void __init
-setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
-{
-#ifdef CONFIG_BLK_DEV_RAM
-	extern int rd_size, rd_image_start, rd_prompt, rd_doload;
-
-	rd_image_start = image_start;
-	rd_prompt = prompt;
-	rd_doload = doload;
-
-	if (rd_sz)
-		rd_size = rd_sz;
-#endif
-}
-
 static void __init request_standard_resources(struct machine_desc *mdesc)
 {
 	struct memblock_region *region;
@@ -643,35 +619,6 @@ static void __init request_standard_resources(struct machine_desc *mdesc)
 		request_resource(&ioport_resource, &lp2);
 }
 
-/*
- *  Tag parsing.
- *
- * This is the new way of passing data to the kernel at boot time.  Rather
- * than passing a fixed inflexible structure to the kernel, we pass a list
- * of variable-sized tags to the kernel.  The first tag must be a ATAG_CORE
- * tag for the list to be recognised (to distinguish the tagged list from
- * a param_struct).  The list is terminated with a zero-length tag (this tag
- * is not parsed in any way).
- */
-static int __init parse_tag_core(const struct tag *tag)
-{
-	if (tag->hdr.size > 2) {
-		if ((tag->u.core.flags & 1) == 0)
-			root_mountflags &= ~MS_RDONLY;
-		ROOT_DEV = old_decode_dev(tag->u.core.rootdev);
-	}
-	return 0;
-}
-
-__tagtable(ATAG_CORE, parse_tag_core);
-
-static int __init parse_tag_mem32(const struct tag *tag)
-{
-	return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
-}
-
-__tagtable(ATAG_MEM, parse_tag_mem32);
-
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = {
  .orig_video_lines	= 30,
@@ -681,116 +628,7 @@ struct screen_info screen_info = {
  .orig_video_isVGA	= 1,
  .orig_video_points	= 8
 };
-
-static int __init parse_tag_videotext(const struct tag *tag)
-{
-	screen_info.orig_x            = tag->u.videotext.x;
-	screen_info.orig_y            = tag->u.videotext.y;
-	screen_info.orig_video_page   = tag->u.videotext.video_page;
-	screen_info.orig_video_mode   = tag->u.videotext.video_mode;
-	screen_info.orig_video_cols   = tag->u.videotext.video_cols;
-	screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
-	screen_info.orig_video_lines  = tag->u.videotext.video_lines;
-	screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
-	screen_info.orig_video_points = tag->u.videotext.video_points;
-	return 0;
-}
-
-__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext);
-#endif
-
-static int __init parse_tag_ramdisk(const struct tag *tag)
-{
-	setup_ramdisk((tag->u.ramdisk.flags & 1) == 0,
-		      (tag->u.ramdisk.flags & 2) == 0,
-		      tag->u.ramdisk.start, tag->u.ramdisk.size);
-	return 0;
-}
-
-__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
-
-static int __init parse_tag_serialnr(const struct tag *tag)
-{
-	system_serial_low = tag->u.serialnr.low;
-	system_serial_high = tag->u.serialnr.high;
-	return 0;
-}
-
-__tagtable(ATAG_SERIAL, parse_tag_serialnr);
-
-static int __init parse_tag_revision(const struct tag *tag)
-{
-	system_rev = tag->u.revision.rev;
-	return 0;
-}
-
-__tagtable(ATAG_REVISION, parse_tag_revision);
-
-static int __init parse_tag_cmdline(const struct tag *tag)
-{
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
-	strlcat(default_command_line, tag->u.cmdline.cmdline,
-		COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
-#else
-	strlcpy(default_command_line, tag->u.cmdline.cmdline,
-		COMMAND_LINE_SIZE);
 #endif
-	return 0;
-}
-
-__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
-
-/*
- * Scan the tag table for this tag, and call its parse function.
- * The tag table is built by the linker from all the __tagtable
- * declarations.
- */
-static int __init parse_tag(const struct tag *tag)
-{
-	extern struct tagtable __tagtable_begin, __tagtable_end;
-	struct tagtable *t;
-
-	for (t = &__tagtable_begin; t < &__tagtable_end; t++)
-		if (tag->hdr.tag == t->tag) {
-			t->parse(tag);
-			break;
-		}
-
-	return t < &__tagtable_end;
-}
-
-/*
- * Parse all tags in the list, checking both the global and architecture
- * specific tag tables.
- */
-static void __init parse_tags(const struct tag *t)
-{
-	for (; t->hdr.size; t = tag_next(t))
-		if (!parse_tag(t))
-			printk(KERN_WARNING
-				"Ignoring unrecognised tag 0x%08x\n",
-				t->hdr.tag);
-}
-
-/*
- * This holds our defaults.
- */
-static struct init_tags {
-	struct tag_header hdr1;
-	struct tag_core   core;
-	struct tag_header hdr2;
-	struct tag_mem32  mem;
-	struct tag_header hdr3;
-} init_tags __initdata = {
-	{ tag_size(tag_core), ATAG_CORE },
-	{ 1, PAGE_SIZE, 0xff },
-	{ tag_size(tag_mem32), ATAG_MEM },
-	{ MEM_SIZE },
-	{ 0, ATAG_NONE }
-};
 
 static int __init customize_machine(void)
 {
@@ -858,78 +696,6 @@ static void __init reserve_crashkernel(void)
 static inline void reserve_crashkernel(void) {}
 #endif /* CONFIG_KEXEC */
 
-static void __init squash_mem_tags(struct tag *tag)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM)
-			tag->hdr.tag = ATAG_NONE;
-}
-
-static struct machine_desc * __init setup_machine_tags(unsigned int nr)
-{
-	struct tag *tags = (struct tag *)&init_tags;
-	struct machine_desc *mdesc = NULL, *p;
-	char *from = default_command_line;
-
-	init_tags.mem.start = PHYS_OFFSET;
-
-	/*
-	 * locate machine in the list of supported machines.
-	 */
-	for_each_machine_desc(p)
-		if (nr == p->nr) {
-			printk("Machine: %s\n", p->name);
-			mdesc = p;
-			break;
-		}
-
-	if (!mdesc) {
-		early_print("\nError: unrecognized/unsupported machine ID"
-			" (r1 = 0x%08x).\n\n", nr);
-		dump_machine_table(); /* does not return */
-	}
-
-	if (__atags_pointer)
-		tags = phys_to_virt(__atags_pointer);
-	else if (mdesc->atag_offset)
-		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
-
-#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
-	/*
-	 * If we have the old style parameters, convert them to
-	 * a tag list.
-	 */
-	if (tags->hdr.tag != ATAG_CORE)
-		convert_to_tag_list(tags);
-#endif
-
-	if (tags->hdr.tag != ATAG_CORE) {
-#if defined(CONFIG_OF)
-		/*
-		 * If CONFIG_OF is set, then assume this is a reasonably
-		 * modern system that should pass boot parameters
-		 */
-		early_print("Warning: Neither atags nor dtb found\n");
-#endif
-		tags = (struct tag *)&init_tags;
-	}
-
-	if (mdesc->fixup)
-		mdesc->fixup(tags, &from, &meminfo);
-
-	if (tags->hdr.tag == ATAG_CORE) {
-		if (meminfo.nr_banks != 0)
-			squash_mem_tags(tags);
-		save_atags(tags);
-		parse_tags(tags);
-	}
-
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
-	return mdesc;
-}
-
 static int __init meminfo_cmp(const void *_a, const void *_b)
 {
 	const struct membank *a = _a, *b = _b;
@@ -944,7 +710,7 @@ void __init setup_arch(char **cmdline_p)
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
-		mdesc = setup_machine_tags(machine_arch_type);
+		mdesc = setup_machine_tags(__atags_pointer, machine_arch_type);
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
@@ -977,8 +743,10 @@ void __init setup_arch(char **cmdline_p)
 	unflatten_device_tree();
 
 #ifdef CONFIG_SMP
-	if (is_smp())
+	if (is_smp()) {
+		smp_set_ops(mdesc->smp);
 		smp_init_cpus();
+	}
 #endif
 	reserve_crashkernel();
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ebd8ad274d76..d100eacdb798 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -19,14 +19,15 @@
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/cpu.h>
-#include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
 #include <linux/completion.h>
+#include <linux/cpufreq.h>
 
 #include <linux/atomic.h>
+#include <asm/smp.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
@@ -42,6 +43,7 @@
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
 #include <asm/smp_plat.h>
+#include <asm/mach/arch.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -50,8 +52,15 @@
  */
 struct secondary_data secondary_data;
 
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
 enum ipi_msg_type {
-	IPI_TIMER = 2,
+	IPI_WAKEUP,
+	IPI_TIMER,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CALL_FUNC_SINGLE,
@@ -60,6 +69,14 @@ enum ipi_msg_type {
 
 static DECLARE_COMPLETION(cpu_running);
 
+static struct smp_operations smp_ops;
+
+void __init smp_set_ops(struct smp_operations *ops)
+{
+	if (ops)
+		smp_ops = *ops;
+};
+
 int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
@@ -100,13 +117,64 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
 	return ret;
 }
 
+/* platform specific SMP operations */
+void __init smp_init_cpus(void)
+{
+	if (smp_ops.smp_init_cpus)
+		smp_ops.smp_init_cpus();
+}
+
+static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	if (smp_ops.smp_prepare_cpus)
+		smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	if (smp_ops.smp_secondary_init)
+		smp_ops.smp_secondary_init(cpu);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (smp_ops.smp_boot_secondary)
+		return smp_ops.smp_boot_secondary(cpu, idle);
+	return -ENOSYS;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static void percpu_timer_stop(void);
 
+static int platform_cpu_kill(unsigned int cpu)
+{
+	if (smp_ops.cpu_kill)
+		return smp_ops.cpu_kill(cpu);
+	return 1;
+}
+
+static void platform_cpu_die(unsigned int cpu)
+{
+	if (smp_ops.cpu_die)
+		smp_ops.cpu_die(cpu);
+}
+
+static int platform_cpu_disable(unsigned int cpu)
+{
+	if (smp_ops.cpu_disable)
+		return smp_ops.cpu_disable(cpu);
+
+	/*
+	 * By default, allow disabling all CPUs except the first one,
+	 * since this is special on a lot of platforms, e.g. because
+	 * of clock tick interrupts.
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpu_disable(void)
+int __cpuinit __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	int ret;
@@ -149,7 +217,7 @@ static DECLARE_COMPLETION(cpu_died);
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpu_die(unsigned int cpu)
+void __cpuinit __cpu_die(unsigned int cpu)
 {
 	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
 		pr_err("CPU%u: cpu didn't die\n", cpu);
@@ -347,7 +415,8 @@ void arch_send_call_function_single_ipi(int cpu)
 }
 
 static const char *ipi_types[NR_IPI] = {
-#define S(x,s)	[x - IPI_TIMER] = s
+#define S(x,s)	[x] = s
+	S(IPI_WAKEUP, "CPU wakeup interrupts"),
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
 	S(IPI_CALL_FUNC, "Function call interrupts"),
@@ -500,10 +569,13 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	unsigned int cpu = smp_processor_id();
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI)
-		__inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]);
+	if (ipinr < NR_IPI)
+		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 
 	switch (ipinr) {
+	case IPI_WAKEUP:
+		break;
+
 	case IPI_TIMER:
 		irq_enter();
 		ipi_timer();
@@ -584,3 +656,56 @@ int setup_profiling_timer(unsigned int multiplier)
 {
 	return -EINVAL;
 }
+
+#ifdef CONFIG_CPU_FREQ
+
+static DEFINE_PER_CPU(unsigned long, l_p_j_ref);
+static DEFINE_PER_CPU(unsigned long, l_p_j_ref_freq);
+static unsigned long global_l_p_j_ref;
+static unsigned long global_l_p_j_ref_freq;
+
+static int cpufreq_callback(struct notifier_block *nb,
+					unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	int cpu = freq->cpu;
+
+	if (freq->flags & CPUFREQ_CONST_LOOPS)
+		return NOTIFY_OK;
+
+	if (!per_cpu(l_p_j_ref, cpu)) {
+		per_cpu(l_p_j_ref, cpu) =
+			per_cpu(cpu_data, cpu).loops_per_jiffy;
+		per_cpu(l_p_j_ref_freq, cpu) = freq->old;
+		if (!global_l_p_j_ref) {
+			global_l_p_j_ref = loops_per_jiffy;
+			global_l_p_j_ref_freq = freq->old;
+		}
+	}
+
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+	    (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
+		loops_per_jiffy = cpufreq_scale(global_l_p_j_ref,
+						global_l_p_j_ref_freq,
+						freq->new);
+		per_cpu(cpu_data, cpu).loops_per_jiffy =
+			cpufreq_scale(per_cpu(l_p_j_ref, cpu),
+					per_cpu(l_p_j_ref_freq, cpu),
+					freq->new);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_notifier = {
+	.notifier_call  = cpufreq_callback,
+};
+
+static int __init register_cpufreq_notifier(void)
+{
+	return cpufreq_register_notifier(&cpufreq_notifier,
+						CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(register_cpufreq_notifier);
+
+#endif
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index fef42b21cecb..e1f906989bb8 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
-#include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -96,7 +95,52 @@ static void twd_timer_stop(struct clock_event_device *clk)
 	disable_percpu_irq(clk->irq);
 }
 
-#ifdef CONFIG_CPU_FREQ
+#ifdef CONFIG_COMMON_CLK
+
+/*
+ * Updates clockevent frequency when the cpu frequency changes.
+ * Called on the cpu that is changing frequency with interrupts disabled.
+ */
+static void twd_update_frequency(void *new_rate)
+{
+	twd_timer_rate = *((unsigned long *) new_rate);
+
+	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+}
+
+static int twd_rate_change(struct notifier_block *nb,
+	unsigned long flags, void *data)
+{
+	struct clk_notifier_data *cnd = data;
+
+	/*
+	 * The twd clock events must be reprogrammed to account for the new
+	 * frequency.  The timer is local to a cpu, so cross-call to the
+	 * changing cpu.
+	 */
+	if (flags == POST_RATE_CHANGE)
+		smp_call_function(twd_update_frequency,
+				  (void *)&cnd->new_rate, 1);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block twd_clk_nb = {
+	.notifier_call = twd_rate_change,
+};
+
+static int twd_clk_init(void)
+{
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
+		return clk_notifier_register(twd_clk, &twd_clk_nb);
+
+	return 0;
+}
+core_initcall(twd_clk_init);
+
+#elif defined (CONFIG_CPU_FREQ)
+
+#include <linux/cpufreq.h>
 
 /*
  * Updates clockevent frequency when the cpu frequency changes.
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index af2afb019672..09be0c3c9069 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -25,7 +25,6 @@
 #include <linux/timer.h>
 #include <linux/irq.h>
 
-#include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/sched_clock.h>
 #include <asm/stacktrace.h>
@@ -80,21 +79,6 @@ u32 arch_gettimeoffset(void)
 }
 #endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
-	static unsigned int count = HZ/2;
-
-	if (--count == 0) {
-		count = HZ/2;
-		leds_event(led_timer);
-	}
-}
-#else
-#define	do_leds()
-#endif
-
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -102,7 +86,6 @@ static inline void do_leds(void)
 void timer_tick(void)
 {
 	profile_tick(CPU_PROFILING);
-	do_leds();
 	xtime_update(1);
 #ifndef CONFIG_SMP
 	update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 198b08456e90..26c12c6440fc 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid)
  * init_cpu_topology is called at boot when only one cpu is running
  * which prevent simultaneous write access to cpu_topology array
  */
-void init_cpu_topology(void)
+void __init init_cpu_topology(void)
 {
 	unsigned int cpu;
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f7945218b8c6..b0179b89a04c 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 2473fd1fd51c..af72969820b4 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -16,13 +16,30 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-mmu-y	+= copy_from_user.o copy_to_user.o
+
+# the code in uaccess.S is not preemption safe and
+# probably faster on ARMv3 only
+ifeq ($(CONFIG_PREEMPT),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+ifneq ($(CONFIG_CPU_32v3),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+  mmu-y	+= uaccess.o
+endif
+endif
 
 # using lib_ here won't override already available weak symbols
 obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
 
-lib-$(CONFIG_MMU)		+= $(mmu-y)
-lib-y				+= io-readsw-armv4.o io-writesw-armv4.o
+lib-$(CONFIG_MMU) += $(mmu-y)
+
+ifeq ($(CONFIG_CPU_32v3),y)
+  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
+else
+  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
+endif
+
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index d6dacc69254e..9d0a30032d7f 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -34,7 +34,18 @@ struct arm_delay_ops arm_delay_ops = {
 	.udelay		= __loop_udelay,
 };
 
-#ifdef ARCH_HAS_READ_CURRENT_TIMER
+static const struct delay_timer *delay_timer;
+static bool delay_calibrated;
+
+int read_current_timer(unsigned long *timer_val)
+{
+	if (!delay_timer)
+		return -ENXIO;
+
+	*timer_val = delay_timer->read_current_timer();
+	return 0;
+}
+
 static void __timer_delay(unsigned long cycles)
 {
 	cycles_t start = get_cycles();
@@ -55,17 +66,24 @@ static void __timer_udelay(unsigned long usecs)
 	__timer_const_udelay(usecs * UDELAY_MULT);
 }
 
-void __init init_current_timer_delay(unsigned long freq)
+void __init register_current_timer_delay(const struct delay_timer *timer)
 {
-	pr_info("Switching to timer-based delay loop\n");
-	lpj_fine			= freq / HZ;
-	arm_delay_ops.delay		= __timer_delay;
-	arm_delay_ops.const_udelay	= __timer_const_udelay;
-	arm_delay_ops.udelay		= __timer_udelay;
+	if (!delay_calibrated) {
+		pr_info("Switching to timer-based delay loop\n");
+		delay_timer			= timer;
+		lpj_fine			= timer->freq / HZ;
+		loops_per_jiffy			= lpj_fine;
+		arm_delay_ops.delay		= __timer_delay;
+		arm_delay_ops.const_udelay	= __timer_const_udelay;
+		arm_delay_ops.udelay		= __timer_udelay;
+		delay_calibrated		= true;
+	} else {
+		pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
+	}
 }
 
 unsigned long __cpuinit calibrate_delay_is_known(void)
 {
+	delay_calibrated = true;
 	return lpj_fine;
 }
-#endif
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 11093a7c3e32..9b06bb41fca6 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -16,8 +16,9 @@
  * __get_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  * Outputs:	r0 is the error code
- *		r2, r3 contains the zero-extended value
+ *		r2 contains the zero-extended value
  *		lr corrupted
  *
  * No other registers must be altered.  (see <asm/uaccess.h>
@@ -27,33 +28,39 @@
  * Note also that it is intended that __get_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
+	check_uaccess r0, 1, r1, r2, __get_user_bad
 1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb)	r2, [r0]
-3: TUSER(ldrb)	r3, [r0, #1]
+	check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb	.req	ip
+2:	ldrbt	r2, [r0], #1
+3:	ldrbt	rb, [r0], #0
 #else
-2: TUSER(ldrb)	r2, [r0], #1
-3: TUSER(ldrb)	r3, [r0]
+rb	.req	r0
+2:	ldrb	r2, [r0]
+3:	ldrb	rb, [r0, #1]
 #endif
 #ifndef __ARMEB__
-	orr	r2, r2, r3, lsl #8
+	orr	r2, r2, rb, lsl #8
 #else
-	orr	r2, r3, r2, lsl #8
+	orr	r2, rb, r2, lsl #8
 #endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
+	check_uaccess r0, 4, r1, r2, __get_user_bad
 4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
new file mode 100644
index 000000000000..88487c8c4f23
--- /dev/null
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -0,0 +1,106 @@
+/*
+ *  linux/arch/arm/lib/io-readsw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Linsw_bad_alignment:
+		adr	r0, .Linsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Linsw_bad_align_msg:
+		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Linsw_align:	tst	r1, #1
+		bne	.Linsw_bad_alignment
+
+		ldr	r3, [r0]
+		strb	r3, [r1], #1
+		mov	r3, r3, lsr #8
+		strb	r3, [r1], #1
+
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_readsw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Linsw_align
+
+.Linsw_aligned:	mov	ip, #0xff
+		orr	ip, ip, ip, lsl #8
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_insw_8
+
+.Linsw_8_lp:	ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		ldr	r5, [r0]
+		and	r5, r5, ip
+		ldr	r6, [r0]
+		orr	r5, r5, r6, lsl #16
+
+		ldr	r6, [r0]
+		and	r6, r6, ip
+		ldr	lr, [r0]
+		orr	r6, r6, lr, lsl #16
+
+		stmia	r1!, {r3 - r6}
+
+		subs	r2, r2, #8
+		bpl	.Linsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		stmia	r1!, {r3, r4}
+
+.Lno_insw_4:	tst	r2, #2
+		beq	.Lno_insw_2
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		str	r3, [r1], #4
+
+.Lno_insw_2:	tst	r2, #1
+		ldrne	r3, [r0]
+		strneb	r3, [r1], #1
+		movne	r3, r3, lsr #8
+		strneb	r3, [r1]
+
+		ldmfd	sp!, {r4, r5, r6, pc}
+
+
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
new file mode 100644
index 000000000000..49b800419e32
--- /dev/null
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -0,0 +1,126 @@
+/*
+ *  linux/arch/arm/lib/io-writesw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Loutsw_bad_alignment:
+		adr	r0, .Loutsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Loutsw_bad_align_msg:
+		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Loutsw_align:	tst	r1, #1
+		bne	.Loutsw_bad_alignment
+
+		add	r1, r1, #2
+
+		ldr	r3, [r1, #-4]
+		mov	r3, r3, lsr #16
+		orr	r3, r3, r3, lsl #16
+		str	r3, [r0]
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_writesw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Loutsw_align
+
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_outsw_8
+
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		subs	r2, r2, #8
+		bpl	.Loutsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4
+
+		ldmia	r1!, {r3, r4}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_4:	tst	r2, #2
+		beq	.Lno_outsw_2
+
+		ldr	r3, [r1], #4
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_2:	tst	r2, #1
+
+		ldrne	r3, [r1]
+
+		movne	ip, r3, lsl #16
+		orrne	ip, ip, ip, lsr #16
+		strne	ip, [r0]
+
+		ldmfd	sp!, {r4, r5, r6, pc}
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 7db25990c589..3d73dcb959b0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -16,6 +16,7 @@
  * __put_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  *		r2, r3 contains the value
  * Outputs:	r0 is the error code
  *		lr corrupted
@@ -27,16 +28,19 @@
  * Note also that it is intended that __put_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
+	check_uaccess r0, 1, r1, ip, __put_user_bad
 1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
+	check_uaccess r0, 2, r1, ip, __put_user_bad
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
@@ -60,12 +64,14 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
+	check_uaccess r0, 4, r1, ip, __put_user_bad
 4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+	check_uaccess r0, 8, r1, ip, __put_user_bad
 #ifdef CONFIG_THUMB2_KERNEL
 5: TUSER(str)	r2, [r0]
 6: TUSER(str)	r3, [r0, #4]
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
new file mode 100644
index 000000000000..5c908b1cb8ed
--- /dev/null
+++ b/arch/arm/lib/uaccess.S
@@ -0,0 +1,564 @@
+/*
+ *  linux/arch/arm/lib/uaccess.S
+ *
+ *  Copyright (C) 1995, 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Routines to block copy data to/from user memory
+ *   These are highly optimised both for the 4k page size
+ *   and for various alignments.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/domain.h>
+
+		.text
+
+#define PAGE_SHIFT 12
+
+/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
+ * Purpose  : copy a block to user memory from kernel memory
+ * Params   : to   - user memory
+ *          : from - kernel memory
+ *          : n    - number of bytes to copy
+ * Returns  : Number of bytes NOT copied.
+ */
+
+.Lc2u_dest_not_aligned:
+		rsb	ip, ip, #4
+		cmp	ip, #2
+		ldrb	r3, [r1], #1
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #1
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		sub	r2, r2, ip
+		b	.Lc2u_dest_aligned
+
+ENTRY(__copy_to_user)
+		stmfd	sp!, {r2, r4 - r7, lr}
+		cmp	r2, #4
+		blt	.Lc2u_not_enough
+		ands	ip, r0, #3
+		bne	.Lc2u_dest_not_aligned
+.Lc2u_dest_aligned:
+
+		ands	ip, r1, #3
+		bne	.Lc2u_src_not_aligned
+/*
+ * Seeing as there has to be at least 8 bytes to copy, we can
+ * copy one word, and force a user-mode page fault...
+ */
+
+.Lc2u_0fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_0nowords
+		ldr	r3, [r1], #4
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_0fupi
+/*
+ * ip = max no. of bytes to copy before needing another "strt" insn
+ */
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #32
+		blt	.Lc2u_0rem8lp
+
+.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		ldmia	r1!, {r3 - r6}
+		subs	ip, ip, #32
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_0cpy8lp
+
+.Lc2u_0rem8lp:	cmn	ip, #16
+		ldmgeia	r1!, {r3 - r6}
+		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
+		tst	ip, #8
+		ldmneia	r1!, {r3 - r4}
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		ldrne	r3, [r1], #4
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_0fupi
+.Lc2u_0nowords:	teq	ip, #0
+		beq	.Lc2u_finished
+.Lc2u_nowords:	cmp	ip, #2
+		ldrb	r3, [r1], #1
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #1
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_not_enough:
+		movs	ip, r2
+		bne	.Lc2u_nowords
+.Lc2u_finished:	mov	r0, #0
+		ldmfd	sp!, {r2, r4 - r7, pc}
+
+.Lc2u_src_not_aligned:
+		bic	r1, r1, #3
+		ldr	r7, [r1], #4
+		cmp	ip, #2
+		bgt	.Lc2u_3fupi
+		beq	.Lc2u_2fupi
+.Lc2u_1fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_1nowords
+		mov	r3, r7, pull #8
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #24
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_1fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_1rem8lp
+
+.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #24
+		mov	r4, r4, pull #8
+		orr	r4, r4, r5, push #24
+		mov	r5, r5, pull #8
+		orr	r5, r5, r6, push #24
+		mov	r6, r6, pull #8
+		orr	r6, r6, r7, push #24
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_1cpy8lp
+
+.Lc2u_1rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #8
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #24
+		movne	r4, r4, pull #8
+		orrne	r4, r4, r7, push #24
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #8
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #24
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_1fupi
+.Lc2u_1nowords:	mov	r3, r7, get_byte_1
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		movge	r3, r7, get_byte_2
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		movgt	r3, r7, get_byte_3
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_2fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_2nowords
+		mov	r3, r7, pull #16
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #16
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_2fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_2rem8lp
+
+.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #16
+		mov	r4, r4, pull #16
+		orr	r4, r4, r5, push #16
+		mov	r5, r5, pull #16
+		orr	r5, r5, r6, push #16
+		mov	r6, r6, pull #16
+		orr	r6, r6, r7, push #16
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_2cpy8lp
+
+.Lc2u_2rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #16
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #16
+		movne	r4, r4, pull #16
+		orrne	r4, r4, r7, push #16
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #16
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #16
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_2fupi
+.Lc2u_2nowords:	mov	r3, r7, get_byte_2
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		movge	r3, r7, get_byte_3
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #0
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_3fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_3nowords
+		mov	r3, r7, pull #24
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #8
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_3fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_3rem8lp
+
+.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #8
+		mov	r4, r4, pull #24
+		orr	r4, r4, r5, push #8
+		mov	r5, r5, pull #24
+		orr	r5, r5, r6, push #8
+		mov	r6, r6, pull #24
+		orr	r6, r6, r7, push #8
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_3cpy8lp
+
+.Lc2u_3rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #24
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #8
+		movne	r4, r4, pull #24
+		orrne	r4, r4, r7, push #8
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #24
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #8
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_3fupi
+.Lc2u_3nowords:	mov	r3, r7, get_byte_3
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #0
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+ENDPROC(__copy_to_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+9001:		ldmfd	sp!, {r0, r4 - r7, pc}
+		.popsection
+
+/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
+ * Purpose  : copy a block from user memory to kernel memory
+ * Params   : to   - kernel memory
+ *          : from - user memory
+ *          : n    - number of bytes to copy
+ * Returns  : Number of bytes NOT copied.
+ */
+.Lcfu_dest_not_aligned:
+		rsb	ip, ip, #4
+		cmp	ip, #2
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		sub	r2, r2, ip
+		b	.Lcfu_dest_aligned
+
+ENTRY(__copy_from_user)
+		stmfd	sp!, {r0, r2, r4 - r7, lr}
+		cmp	r2, #4
+		blt	.Lcfu_not_enough
+		ands	ip, r0, #3
+		bne	.Lcfu_dest_not_aligned
+.Lcfu_dest_aligned:
+		ands	ip, r1, #3
+		bne	.Lcfu_src_not_aligned
+
+/*
+ * Seeing as there has to be at least 8 bytes to copy, we can
+ * copy one word, and force a user-mode page fault...
+ */
+
+.Lcfu_0fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_0nowords
+USER(	TUSER(	ldr)	r3, [r1], #4)
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_0fupi
+/*
+ * ip = max no. of bytes to copy before needing another "strt" insn
+ */
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #32
+		blt	.Lcfu_0rem8lp
+
+.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		stmia	r0!, {r3 - r6}
+		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		subs	ip, ip, #32
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_0cpy8lp
+
+.Lcfu_0rem8lp:	cmn	ip, #16
+		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
+		stmgeia	r0!, {r3 - r6}
+		tst	ip, #8
+		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_0fupi
+.Lcfu_0nowords:	teq	ip, #0
+		beq	.Lcfu_finished
+.Lcfu_nowords:	cmp	ip, #2
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_not_enough:
+		movs	ip, r2
+		bne	.Lcfu_nowords
+.Lcfu_finished:	mov	r0, #0
+		add	sp, sp, #8
+		ldmfd	sp!, {r4 - r7, pc}
+
+.Lcfu_src_not_aligned:
+		bic	r1, r1, #3
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		cmp	ip, #2
+		bgt	.Lcfu_3fupi
+		beq	.Lcfu_2fupi
+.Lcfu_1fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_1nowords
+		mov	r3, r7, pull #8
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #24
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_1fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_1rem8lp
+
+.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #24
+		mov	r4, r4, pull #8
+		orr	r4, r4, r5, push #24
+		mov	r5, r5, pull #8
+		orr	r5, r5, r6, push #24
+		mov	r6, r6, pull #8
+		orr	r6, r6, r7, push #24
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_1cpy8lp
+
+.Lcfu_1rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #8
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #24
+		movne	r4, r4, pull #8
+		orrne	r4, r4, r7, push #24
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #8
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #24
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_1fupi
+.Lcfu_1nowords:	mov	r3, r7, get_byte_1
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+		movge	r3, r7, get_byte_2
+		strgeb	r3, [r0], #1
+		movgt	r3, r7, get_byte_3
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_2fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_2nowords
+		mov	r3, r7, pull #16
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #16
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_2fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_2rem8lp
+
+
+.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #16
+		mov	r4, r4, pull #16
+		orr	r4, r4, r5, push #16
+		mov	r5, r5, pull #16
+		orr	r5, r5, r6, push #16
+		mov	r6, r6, pull #16
+		orr	r6, r6, r7, push #16
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_2cpy8lp
+
+.Lcfu_2rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #16
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #16
+		movne	r4, r4, pull #16
+		orrne	r4, r4, r7, push #16
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #16
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #16
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_2fupi
+.Lcfu_2nowords:	mov	r3, r7, get_byte_2
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+		movge	r3, r7, get_byte_3
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_3fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_3nowords
+		mov	r3, r7, pull #24
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #8
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_3fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_3rem8lp
+
+.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		orr	r3, r3, r4, push #8
+		mov	r4, r4, pull #24
+		orr	r4, r4, r5, push #8
+		mov	r5, r5, pull #24
+		orr	r5, r5, r6, push #8
+		mov	r6, r6, pull #24
+		orr	r6, r6, r7, push #8
+		stmia	r0!, {r3 - r6}
+		subs	ip, ip, #16
+		bpl	.Lcfu_3cpy8lp
+
+.Lcfu_3rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #24
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #8
+		movne	r4, r4, pull #24
+		orrne	r4, r4, r7, push #8
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #24
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #8
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_3fupi
+.Lcfu_3nowords:	mov	r3, r7, get_byte_3
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+ENDPROC(__copy_from_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+		/*
+		 * We took an exception.  r0 contains a pointer to
+		 * the byte not copied.
+		 */
+9001:		ldr	r2, [sp], #4			@ void *to
+		sub	r2, r0, r2			@ bytes copied
+		ldr	r1, [sp], #4			@ unsigned long count
+		subs	r4, r1, r2			@ bytes left to copy
+		movne	r1, r4
+		blne	__memzero
+		mov	r0, r4
+		ldmfd	sp!, {r4 - r7, pc}
+		.popsection
+
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 30bb7332e30b..5309f9b6aabc 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -12,27 +12,3 @@ else
 params_phys-y	:= 0x20000100
 initrd_phys-y	:= 0x20410000
 endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9260
-dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
-# sam9263
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9n12
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01fb7325fecc..9ac427a702da 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -312,7 +312,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91rm9200_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA27, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 1);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 1);
-			at91_set_B_periph(AT91_PIN_PA11, 1);
-			at91_set_B_periph(AT91_PIN_PA12, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin, 1);
+			at91_set_deglitch(data->slot[i].detect_pin, 1);
 		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 1);
-			at91_set_B_periph(AT91_PIN_PB4, 1);
-			at91_set_B_periph(AT91_PIN_PB5, 1);
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+		switch (i) {
+		case 0:					/* slot A */
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA28, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA29, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PB3, 1);
+				at91_set_B_periph(AT91_PIN_PB4, 1);
+				at91_set_B_periph(AT91_PIN_PB5, 1);
+			}
+			slot_count++;
+			break;
+		case 1:					/* slot B */
+			/* CMD */
+			at91_set_B_periph(AT91_PIN_PA8, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_B_periph(AT91_PIN_PA9, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PA10, 1);
+				at91_set_B_periph(AT91_PIN_PA11, 1);
+				at91_set_B_periph(AT91_PIN_PA12, 1);
+			}
+			slot_count++;
+			break;
+		default:
+			printk(KERN_ERR
+			       "AT91: SD/MMC slot %d not available\n", i);
+			break;
+		}
+		if (slot_count) {
+			/* CLK */
+			at91_set_A_periph(AT91_PIN_PA27, 0);
+
+			mmc_data = *data;
+			platform_device_register(&at91rm9200_mmc_device);
 		}
 	}
 
-	mmc_data = *data;
-	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 104ca40d8d18..aaa443b48c91 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7b9c2ba396ed..af50ff3281c7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -209,92 +209,10 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
 
 
 /* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA5, 1);
-			at91_set_B_periph(AT91_PIN_PA4, 1);
-			at91_set_B_periph(AT91_PIN_PA3, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA7, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA6, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA9, 1);
-			at91_set_A_periph(AT91_PIN_PA10, 1);
-			at91_set_A_periph(AT91_PIN_PA11, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
  *  MMC / SD Slot for Atmel MCI Driver
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 static struct mci_platform_data mmc_data;
 
@@ -726,6 +644,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
@@ -744,10 +664,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9260_rtt_device.num_resources = 2;
+	at91sam9260_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 8df5c1bdff92..11e9fa835cde 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91sam9261_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_B_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_B_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_B_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_B_periph(AT91_PIN_PA4, 1);
-		at91_set_B_periph(AT91_PIN_PA5, 1);
-		at91_set_B_periph(AT91_PIN_PA6, 1);
-	}
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+		/* CLK */
+		at91_set_B_periph(AT91_PIN_PA2, 0);
 
-	mmc_data = *data;
-	platform_device_register(&at91sam9261_mmc_device);
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+			at91_set_B_periph(AT91_PIN_PA6, 1);
+		}
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9261_mmc_device);
+	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9261_rtt_device.num_resources = 2;
+	at91sam9261_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 84b38105231e..144ef5de51b6 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -188,8 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index eb6bbf86fb9f..7c0898fe20fa 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
+static struct mci_platform_data mmc0_data, mmc1_data;
 
 static struct resource mmc0_resources[] = {
 	[0] = {
@@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = {
 };
 
 static struct platform_device at91sam9263_mmc0_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = {
 };
 
 static struct platform_device at91sam9263_mmc1_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = {
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA12, 0);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA16, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin,
+					1);
+			at91_set_deglitch(data->slot[i].detect_pin,
+					1);
+		}
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+		if (mmc_id == 0) {				/* MCI0 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA3, 1);
+					at91_set_A_periph(AT91_PIN_PA4, 1);
+					at91_set_A_periph(AT91_PIN_PA5, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA16, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA17, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA18, 1);
+					at91_set_A_periph(AT91_PIN_PA19, 1);
+					at91_set_A_periph(AT91_PIN_PA20, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
+			}
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA12, 0);
 
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA17, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA18, 1);
-				at91_set_A_periph(AT91_PIN_PA19, 1);
-				at91_set_A_periph(AT91_PIN_PA20, 1);
+				mmc0_data = *data;
+				platform_device_register(&at91sam9263_mmc0_device);
 			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA1, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA0, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA3, 1);
-				at91_set_A_periph(AT91_PIN_PA4, 1);
-				at91_set_A_periph(AT91_PIN_PA5, 1);
+		} else if (mmc_id == 1) {			/* MCI1 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA8, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA21, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA22, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA23, 1);
+					at91_set_A_periph(AT91_PIN_PA24, 1);
+					at91_set_A_periph(AT91_PIN_PA25, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
 			}
-		}
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA6, 0);
 
-		mmc0_data = *data;
-		platform_device_register(&at91sam9263_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA6, 0);
-
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA22, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA23, 1);
-				at91_set_A_periph(AT91_PIN_PA24, 1);
-				at91_set_A_periph(AT91_PIN_PA25, 1);
-			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA7, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA8, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-				at91_set_A_periph(AT91_PIN_PA10, 1);
-				at91_set_A_periph(AT91_PIN_PA11, 1);
+				mmc1_data = *data;
+				platform_device_register(&at91sam9263_mmc1_device);
 			}
 		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9263_mmc1_device);
 	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
@@ -990,6 +1015,8 @@ static struct resource rtt0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1006,6 +1033,8 @@ static struct resource rtt1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1027,14 +1056,14 @@ static void __init at91_add_device_rtt_rtc(void)
 		 * The second resource is needed only for the chosen RTT:
 		 * GPBR will serve as the storage for RTC time offset
 		 */
-		at91sam9263_rtt0_device.num_resources = 2;
+		at91sam9263_rtt0_device.num_resources = 3;
 		at91sam9263_rtt1_device.num_resources = 1;
 		pdev = &at91sam9263_rtt0_device;
 		r = rtt0_resources;
 		break;
 	case 1:
 		at91sam9263_rtt0_device.num_resources = 1;
-		at91sam9263_rtt1_device.num_resources = 2;
+		at91sam9263_rtt1_device.num_resources = 3;
 		pdev = &at91sam9263_rtt1_device;
 		r = rtt1_resources;
 		break;
@@ -1047,6 +1076,8 @@ static void __init at91_add_device_rtt_rtc(void)
 	pdev->name = "rtc-at91sam9";
 	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	r[1].end = r[1].start + 3;
+	r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 06073996a382..e4c3b3709204 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -31,7 +31,7 @@
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 #include <mach/atmel-mci.h>
 
 #include <media/atmel-isi.h>
@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9g45_rtt_device.num_resources = 2;
+	at91sam9g45_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index f09fff932172..deafea0e493d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -22,7 +22,7 @@
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 #include "generic.h"
 
@@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -179,7 +179,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91sam9rl_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PA3, 1);
-		at91_set_A_periph(AT91_PIN_PA4, 1);
-		at91_set_A_periph(AT91_PIN_PA5, 1);
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA2, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA3, 1);
+			at91_set_A_periph(AT91_PIN_PA4, 1);
+			at91_set_A_periph(AT91_PIN_PA5, 1);
+		}
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9rl_mmc_device);
 	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9rl_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9rl_rtt_device.num_resources = 2;
+	at91sam9rl_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 46090e642d8e..6bd7300a2bc5 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -47,7 +47,7 @@ static void at91x40_idle(void)
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
+	__raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
 	cpu_do_idle();
 }
 
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 6ca680a1d5d1..ee06d7bcdf76 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -29,10 +29,10 @@
 #include <mach/at91_tc.h>
 
 #define at91_tc_read(field) \
-	__raw_readl(AT91_TC + field)
+	__raw_readl(AT91_IO_P2V(AT91_TC) + field)
 
 #define at91_tc_write(field, value) \
-	__raw_writel(value, AT91_TC + field);
+	__raw_writel(value, AT91_IO_P2V(AT91_TC) + field);
 
 /*
  *	3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index de7be1931817..93a832f70232 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
-	.det_pin 	= AT91_PIN_PC9,
-	.wp_pin 	= AT91_PIN_PC4,
-	.slot_b		= 1,
-	.wire4		= 1,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 
@@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void)
 	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
 	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
 	/* MMC */
-	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	at91_add_device_mci(0, &afeb9260_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index a5b002f32a61..71d8f362a1d5 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 	// .vcc_pin	= -EINVAL,
 // };
 
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB10,
-	.wp_pin		= AT91_PIN_PC14,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata carmeva_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB10,
+		.wp_pin		= AT91_PIN_PC14,
+	},
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {
@@ -150,7 +150,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(0, &carmeva_mmc_data);
+	at91_add_device_mci(0, &carmeva_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index ecbc13b594de..e71c473316e3 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = {
 
 static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0x68),
-		.type	= "ds1339",
+		I2C_BOARD_INFO("ds1339", 0x68),
 	},
 };
 
@@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA29,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpu9krea_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA29,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static void __init cpu9krea_board_init(void)
@@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&cpu9krea_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	at91_add_device_mci(0, &cpu9krea_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(cpu9krea_i2c_devices,
 		ARRAY_SIZE(cpu9krea_i2c_devices));
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2e6d043c82f2..2cbd1a2b6c35 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 	.pullup_pin	= AT91_PIN_PC14,
 };
 
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
-	.det_pin	= AT91_PIN_PC2,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpuat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {
@@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&cpuat91_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	at91_add_device_mci(0, &cpuat91_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Platform devices */
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 462bc319cbc5..3e37437a7a61 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
 	.rst_pin	= AT91_PIN_PD2,
 };
 
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD5,
+		.wp_pin		= AT91_PIN_PD6,
+	},
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
@@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = {
 
 static void __init csb337_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* Serial */
 	/* DBGU on ttyS0 */
 	at91_register_uart(0, 0, 0);
@@ -240,7 +238,7 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &csb337_mmc_data);
+	at91_add_device_mci(0, &csb337_mci0_data);
 	/* NOR flash */
 	platform_device_register(&csb_flash);
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d1e1f3fc0a47..0cfac16ee9d5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
 	.rst_pin	= AT91_PIN_PC5,
 };
 
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eb9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@@ -113,7 +113,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(0, &eb9200_mmc_data);
+	at91_add_device_mci(0, &eb9200_mci0_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 9c24cb25707c..3d931ffac4bf 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ecbat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
 static void __init ecb_at91board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void)
 	at91_add_device_i2c(NULL, 0);
 
 	/* MMC */
-	at91_add_device_mmc(0, &ecb_at91mmc_data);
+	at91_add_device_mci(0, &ecbat91_mci0_data);
 
 	/* SPI */
 	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+	/* LEDs */
+	at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
 }
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 82bdfde3405f..d93658a2b128 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 	.pullup_pin	= AT91_PIN_PB13,
 };
 
-static struct at91_mmc_data __initdata eco920_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 0,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eco920_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 1,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data eco920_flash_data = {
@@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = {
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+	{       /* D1 */
+		.name                   = "led1",
+		.gpio                   = AT91_PIN_PB0,
+		.active_low             = 1,
+		.default_trigger        = "heartbeat",
+	},
+	{       /* D2 */
+		.name                   = "led2",
+		.gpio                   = AT91_PIN_PB1,
+		.active_low             = 1,
+		.default_trigger        = "timer",
+	}
+};
+
 static void __init eco920_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* DBGU on ttyS0. (Rx & Tx only */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
@@ -104,7 +120,7 @@ static void __init eco920_board_init(void)
 	at91_add_device_usbh(&eco920_usbh_data);
 	at91_add_device_udc(&eco920_udc_data);
 
-	at91_add_device_mmc(0, &eco920_mmc_data);
+	at91_add_device_mci(0, &eco920_mci0_data);
 	platform_device_register(&eco920_flash);
 
 	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
@@ -127,6 +143,8 @@ static void __init eco920_board_init(void)
 	);
 
 	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+	/* LEDs */
+	at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
 }
 
 MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 6cc83a87d77c..fa98abacb1ba 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = {
 };
 
 /* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata flexibity_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 /* LEDs */
@@ -152,7 +152,7 @@ static void __init flexibity_board_init(void)
 	at91_add_device_spi(flexibity_spi_devices,
 		ARRAY_SIZE(flexibity_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &flexibity_mmc_data);
+	at91_add_device_mci(0, &flexibity_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
 }
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 69ab1247ef81..6e47071d8206 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata foxg20_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -247,7 +247,7 @@ static void __init foxg20_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&foxg20_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &foxg20_mmc_data);
+	at91_add_device_mci(0, &foxg20_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 64c1dbf88a07..86050da3ba53 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = {
 	.pullup_pin	= AT91_PIN_PB7,
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB4,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
 static void __init kafa_board_init(void)
 {
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -88,6 +97,8 @@ static void __init kafa_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
 }
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 5d96cb85175f..abe9fed7a3e0 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
 	.pullup_pin	= AT91_PIN_PB22,
 };
 
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata kb9202_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC19,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PC18,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
+
 static void __init kb9202_board_init(void)
 {
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -121,13 +136,15 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &kb9202_mmc_data);
+	at91_add_device_mci(0, &kb9202_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
 	/* NAND */
 	at91_add_device_nand(&kb9202_nand_data);
+	/* LEDs */
+	at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
 }
 
 MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 18103c5d993c..9cda3fd346ae 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata neocore926_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -354,7 +355,7 @@ static void __init neocore926_board_init(void)
 	neocore926_add_device_ts();
 
 	/* MMC */
-	at91_add_device_mmc(1, &neocore926_mmc_data);
+	at91_add_device_mci(0, &neocore926_mci0_data);
 
 	/* Ethernet */
 	at91_add_device_eth(&neocore926_macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 127065504508..f83e1de699e6 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata picotux200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	},
 };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
@@ -112,7 +112,7 @@ static void __init picotux200_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &picotux200_mmc_data);
+	at91_add_device_mci(0, &picotux200_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index bf351e285422..799f214edebe 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -245,7 +245,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index cc2bf9796073..66338e7ebfba 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata dk_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 #endif
 
@@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = {
 
 static void __init dk_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -208,7 +205,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &dk_mmc_data);
+	at91_add_device_mci(0, &dk_mci0_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 62e19e64c9d3..5d1b5729dc69 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	}
 };
 #endif
 
@@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -177,7 +174,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index c3b43aefdb75..a0ecf04e9ae3 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
 /*
  * SD/MC
  */
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB27,
-	.wp_pin		= AT91_PIN_PB29,
+static struct mci_platform_data __initdata rsi_ews_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PB29,
+	},
 };
 
 /*
@@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = {
  */
 static void __init rsi_ews_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	/* This one is for debugging */
@@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void)
 	at91_add_device_spi(rsi_ews_spi_devices,
 			ARRAY_SIZE(rsi_ews_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &rsi_ews_mmc_data);
+	at91_add_device_mci(0, &rsi_ews_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&rsiews_nor_flash);
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 7bf6da70d7d5..c5f01acce3c0 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC8,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC8,
+		.wp_pin		= AT91_PIN_PC4,
+	},
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PA9,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PA6,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
 };
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -194,9 +209,11 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 889c1bf71eb5..8cd6e679fbe0 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -329,7 +329,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 2269be5fa384..27b3af1a3047 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = {
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */
@@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -598,7 +596,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
 #else
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 #endif
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 82adf581afc2..073e17403d98 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci1_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -420,7 +421,7 @@ static void __init ek_board_init(void)
 	/* Touchscreen */
 	ek_add_device_ts();
 	/* MMC */
-	at91_add_device_mmc(1, &ek_mmc_data);
+	at91_add_device_mci(1, &mci1_data);
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 4ea4ee00364b..3ab2b86a3762 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void)
  * MCI (SD/MMC)
  * wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[1] = {
 		.bus_width	= 4,
@@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = {
 	},
 
 };
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 static void __init ek_add_device_mmc(void)
 {
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	if (ek_have_2mmc()) {
 		ek_mmc_data.slot[0].bus_width = 4;
 		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
 		ek_mmc_data.slot[0].wp_pin = -1;
 	}
 	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
 }
 
 /*
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index e7dc3ead7045..fb89ea92e3f2 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA15,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA15,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -303,7 +304,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* AC97 */
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 29eae1626bf7..c3fb31d5116e 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -83,7 +83,6 @@ static void __init add_device_nand(void)
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
@@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = {
 		.wp_pin		= -1,
 	},
 };
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 
 /*
@@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void)
 	/* NAND */
 	add_device_nand();
 	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
 	/* W1 */
 	add_w1();
 }
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1476b9fe7b9..6ea069b57335 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
  * SPI devices.
  */
 static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 0,
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	}
-#endif
 };
 
 static struct spi_board_info usb_a9g20_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 516d340549d8..f162fdfd66eb 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
 /*
  * MMC
  */
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
-	.det_pin	= AT91_PIN_PB9,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB9,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {}
 
 static void __init yl9200_board_init(void)
 {
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -568,7 +566,7 @@ static void __init yl9200_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &yl9200_mmc_data);
+	at91_add_device_mci(0, &yl9200_mci0_data);
 	/* NAND */
 	at91_add_device_nand(&yl9200_nand_data);
 	/* NOR Flash */
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index de2ec6b8fea7..33361505c0cd 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
+#define cpu_has_240M_plla()	(cpu_is_at91sam9261() \
+				|| cpu_is_at91sam9263() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_210M_plla()	(cpu_is_at91sam9260())
+
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
@@ -619,7 +625,7 @@ fail:
 	return 0;
 }
 
-static struct clk *const standard_pmc_clocks[] __initdata = {
+static struct clk *const standard_pmc_clocks[] __initconst = {
 	/* four primary clocks */
 	&clk32k,
 	&main_clk,
@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
 	} else if (cpu_has_800M_plla()) {
 		if (plla.rate_hz > 800000000)
 			pll_overclock = true;
+	} else if (cpu_has_240M_plla()) {
+		if (plla.rate_hz > 240000000)
+			pll_overclock = true;
+	} else if (cpu_has_210M_plla()) {
+		if (plla.rate_hz > 210000000)
+			pll_overclock = true;
 	} else {
 		if (plla.rate_hz > 209000000)
 			pll_overclock = true;
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
deleted file mode 100644
index cab0997be3de..000000000000
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Header file for the Atmel AHB DMA Controller driver
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT_HDMAC_H
-#define AT_HDMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct at_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @cap_mask: dma_capability flags supported by the platform
- */
-struct at_dma_platform_data {
-	unsigned int	nr_channels;
-	dma_cap_mask_t  cap_mask;
-};
-
-/**
- * struct at_dma_slave - Controller-specific information about a slave
- * @dma_dev: required DMA master device
- * @cfg: Platform-specific initializer for the CFG register
- */
-struct at_dma_slave {
-	struct device		*dma_dev;
-	u32			cfg;
-};
-
-
-/* Platform-configurable bits in CFG */
-#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
-#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
-#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
-#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
-#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
-#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
-#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
-#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
-#define		ATC_DST_H2SEL_SW	(0x0 << 13)
-#define		ATC_DST_H2SEL_HW	(0x1 << 13)
-#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
-#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
-#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
-#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
-#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
-#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
-#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
-#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
-#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
-#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
-#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
-
-
-#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
index 998cb0c07135..cd580a12e904 100644
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ b/arch/arm/mach-at91/include/mach/atmel-mci.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_ATMEL_MCI_H
 #define __MACH_ATMEL_MCI_H
 
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 /**
  * struct mci_dma_data - DMA data for MCI interface
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 369afc2ffc5b..c55a4364ffb4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -187,7 +187,6 @@ struct at91_can_data {
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
  /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 09242b67d277..711a7892d331 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -67,13 +67,13 @@
  * to 0xFEF78000 .. 0xFF000000.  (544Kb)
  */
 #define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#define AT91_IO_VIRT_BASE	IOMEM(0xFF000000 - AT91_IO_SIZE)
 #else
 /*
  * Identity mapping for the non MMU case.
  */
 #define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#define AT91_IO_VIRT_BASE	IOMEM(AT91_IO_PHYS_BASE)
 #endif
 
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 6f6118d1576a..97ad68a826f8 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
-static inline const u32* decomp_soc_detect(u32 dbgu_base)
+static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
 
@@ -142,10 +142,10 @@ static inline void arch_decomp_setup(void)
 	int i = 0;
 	const u32* usarts;
 
-	usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+	usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
 
 	if (!usarts)
-		usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
 	if (!usarts) {
 		at91_uart = NULL;
 		return;
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 8dfafe76ffe6..1b1e62b5f41b 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
 #else
 void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
 #endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
-	at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
-	at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
-	unsigned long is_off = at91_get_gpio_value(led);
-	if (is_off)
-		at91_led_on(led);
-	else
-		at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		at91_led_on(at91_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		at91_led_toggle(at91_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		at91_led_on(at91_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if (!at91_leds_timer || !at91_leds_cpu)
-		return -ENODEV;
-
-	leds_event = at91_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	at91_set_gpio_output(cpu_led, 1);
-	at91_set_gpio_output(timer_led, 1);
-
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 944bffb08991..e6f52de1062f 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -73,7 +73,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
 {
 	struct map_desc *desc = &sram_desc[bank];
 
-	desc->virtual = AT91_IO_VIRT_BASE - length;
+	desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length;
 	if (bank > 0)
 		desc->virtual -= sram_desc[bank - 1].length;
 
@@ -88,7 +88,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
 }
 
 static struct map_desc at91_io_desc __initdata = {
-	.virtual	= AT91_VA_BASE_SYS,
+	.virtual	= (unsigned long)AT91_VA_BASE_SYS,
 	.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 	.length		= SZ_16K,
 	.type		= MT_DEVICE,
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
new file mode 100644
index 000000000000..4c3892fe02c3
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile
@@ -0,0 +1 @@
+obj-y += bcm2835.o
diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot
new file mode 100644
index 000000000000..2d30e17f5b69
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
new file mode 100644
index 000000000000..f6fea4933571
--- /dev/null
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irqchip/bcm2835.h>
+#include <linux/of_platform.h>
+#include <linux/bcm2835_timer.h>
+#include <linux/clk/bcm2835.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/bcm2835_soc.h>
+
+static struct map_desc io_map __initdata = {
+	.virtual = BCM2835_PERIPH_VIRT,
+	.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
+	.length = BCM2835_PERIPH_SIZE,
+	.type = MT_DEVICE
+};
+
+void __init bcm2835_map_io(void)
+{
+	iotable_init(&io_map, 1);
+}
+
+void __init bcm2835_init(void)
+{
+	int ret;
+
+	bcm2835_init_clocks();
+
+	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
+				   NULL);
+	if (ret) {
+		pr_err("of_platform_populate failed: %d\n", ret);
+		BUG();
+	}
+}
+
+static const char * const bcm2835_compat[] = {
+	"brcm,bcm2835",
+	NULL
+};
+
+DT_MACHINE_START(BCM2835, "BCM2835")
+	.map_io = bcm2835_map_io,
+	.init_irq = bcm2835_init_irq,
+	.handle_irq = bcm2835_handle_irq,
+	.init_machine = bcm2835_init,
+	.timer = &bcm2835_timer,
+	.dt_compat = bcm2835_compat
+MACHINE_END
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h
index 70ff58192ec9..d4dfcf7a9cda 100644
--- a/arch/arm/mach-picoxcell/include/mach/hardware.h
+++ b/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h
@@ -1,7 +1,8 @@
 /*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (C) 2012 Stephen Warren
  *
- * This file contains the hardware definitions of the picoXcell SoC devices.
+ * Derived from code:
+ * Copyright (C) 2010 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,9 +14,16 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
 
-#include <mach/picoxcell_soc.h>
+#ifndef __MACH_BCM2835_BCM2835_SOC_H__
+#define __MACH_BCM2835_BCM2835_SOC_H__
+
+#include <asm/sizes.h>
+
+#define BCM2835_PERIPH_PHYS	0x20000000
+#define BCM2835_PERIPH_VIRT	0xf0000000
+#define BCM2835_PERIPH_SIZE	SZ_16M
+#define BCM2835_DEBUG_PHYS	0x20201000
+#define BCM2835_DEBUG_VIRT	0xf0201000
 
 #endif
diff --git a/arch/arm/mach-bcm2835/include/mach/debug-macro.S b/arch/arm/mach-bcm2835/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8a161e44ae28
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/bcm2835_soc.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =BCM2835_DEBUG_PHYS
+	ldr	\rv, =BCM2835_DEBUG_VIRT
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-bcm2835/include/mach/timex.h
index 6ea02f2176b7..6d021e136ae3 100644
--- a/arch/arm/mach-pnx4008/include/mach/param.h
+++ b/arch/arm/mach-bcm2835/include/mach/timex.h
@@ -1,7 +1,7 @@
 /*
- *  arch/arm/mach-pnx4008/include/mach/param.h
+ *  BCM2835 system clock frequency
  *
- *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2010 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,4 +18,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#define HZ 100
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(1000000)
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h
new file mode 100644
index 000000000000..cc46dcc72377
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2010 Broadcom
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/bcm2835_soc.h>
+
+#define UART0_BASE BCM2835_DEBUG_PHYS
+
+#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR)
+#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR)
+#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR)
+
+static inline void putc(int c)
+{
+	while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	__raw_writel(c, BCM2835_UART_DR);
+}
+
+static inline void flush(void)
+{
+	int fr;
+
+	do {
+		fr = __raw_readl(BCM2835_UART_FR);
+		barrier();
+	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
deleted file mode 100644
index 9170d16dca50..000000000000
--- a/arch/arm/mach-bcmring/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-choice
-	prompt "Processor selection in BCMRING family of devices"
-	depends on ARCH_BCMRING
-	default ARCH_BCM11107
-
-config ARCH_FPGA11107
-	bool "FPGA11107"
-
-config ARCH_BCM11107
-	bool "BCM11107"
-endchoice
-
-menu "BCMRING Options"
-	depends on ARCH_BCMRING
-
-config BCM_ZRELADDR
-	hex "Compressed ZREL ADDR"
-
-endmenu
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
deleted file mode 100644
index f8d9fcedf917..000000000000
--- a/arch/arm/mach-bcmring/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
-obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
deleted file mode 100644
index aef2467757fa..000000000000
--- a/arch/arm/mach-bcmring/Makefile.boot
+++ /dev/null
@@ -1,6 +0,0 @@
-# Address where decompressor will be written and eventually executed.
-#
-# default to SDRAM
-zreladdr-y      += $(CONFIG_BCM_ZRELADDR)
-params_phys-y   := 0x00000800
-
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
deleted file mode 100644
index 45c97b1ee9b1..000000000000
--- a/arch/arm/mach-bcmring/arch.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-
-#include <linux/proc_fs.h>
-#include <linux/sysctl.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/pmu.h>
-
-#include <asm/mach/arch.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <cfg_global.h>
-
-#include "core.h"
-
-HW_DECLARE_SPINLOCK(arch)
-HW_DECLARE_SPINLOCK(gpio)
-#if defined(CONFIG_DEBUG_SPINLOCK)
-    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
-#endif
-
-/* sysctl */
-static int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
-
-static void bcmring_restart(char mode, const char *cmd)
-{
-	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
-	if (mode == 'h') {
-		/* Reboot configured in proc entry */
-		if (bcmring_arch_warm_reboot) {
-			printk("warm reset\n");
-			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
-		} else {
-			/* Force reset of everything */
-			printk("force reset\n");
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-	} else {
-		/* Force reset of everything */
-		printk("force reset\n");
-		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-	}
-}
-
-static struct ctl_table_header *bcmring_sysctl_header;
-
-static struct ctl_table bcmring_sysctl_warm_reboot[] = {
-	{
-	 .procname = "warm",
-	 .data = &bcmring_arch_warm_reboot,
-	 .maxlen = sizeof(int),
-	 .mode = 0644,
-	 .proc_handler = proc_dointvec},
-	{}
-};
-
-static struct ctl_table bcmring_sysctl_reboot[] = {
-	{
-	 .procname = "reboot",
-	 .mode = 0555,
-	 .child = bcmring_sysctl_warm_reboot},
-	{}
-};
-
-static struct resource nand_resource[] = {
-	[0] = {
-		.start = MM_ADDR_IO_NAND,
-		.end = MM_ADDR_IO_NAND + 0x1000 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nand_device = {
-	.name = "bcm-nand",
-	.id = -1,
-	.resource = nand_resource,
-	.num_resources	= ARRAY_SIZE(nand_resource),
-};
-
-static struct resource pmu_resource = {
-	.start	= IRQ_PMUIRQ,
-	.end	= IRQ_PMUIRQ,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&nand_device,
-	&pmu_device,
-};
-
-/****************************************************************************
-*
-*   Called from the customize_machine function in arch/arm/kernel/setup.c
-*
-*   The customize_machine function is tagged as an arch_initcall
-*   (see include/linux/init.h for the order that the various init sections
-*   are called in.
-*
-*****************************************************************************/
-static void __init bcmring_init_machine(void)
-{
-
-	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
-
-	/* Enable spread spectrum */
-	chipcHw_enableSpreadSpectrum();
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	bcmring_amba_init();
-
-	dma_init();
-}
-
-/****************************************************************************
-*
-*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
-*   passed in by the boot loader.
-*
-*****************************************************************************/
-
-static void __init bcmring_fixup(struct tag *t, char **cmdline,
-	struct meminfo *mi) {
-#ifdef CONFIG_BLK_DEV_INITRD
-	printk(KERN_NOTICE "bcmring_fixup\n");
-	t->hdr.tag = ATAG_CORE;
-	t->hdr.size = tag_size(tag_core);
-	t->u.core.flags = 0;
-	t->u.core.pagesize = PAGE_SIZE;
-	t->u.core.rootdev = 31 << 8 | 0;
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_MEM;
-	t->hdr.size = tag_size(tag_mem32);
-	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
-	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
-
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_NONE;
-	t->hdr.size = 0;
-#endif
-}
-
-/****************************************************************************
-*
-*   Machine Description
-*
-*****************************************************************************/
-
-MACHINE_START(BCMRING, "BCMRING")
-	/* Maintainer: Broadcom Corporation */
-	.fixup = bcmring_fixup,
-	.map_io = bcmring_map_io,
-	.init_early = bcmring_init_early,
-	.init_irq = bcmring_init_irq,
-	.timer = &bcmring_timer,
-	.init_machine = bcmring_init_machine,
-	.restart = bcmring_restart,
-MACHINE_END
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
deleted file mode 100644
index ad237a42d265..000000000000
--- a/arch/arm/mach-bcmring/clock.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <mach/csp/hw_cfg.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_reg.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include "clock.h"
-
-#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
-#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
-#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
-
-#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	/* enable parent clock first */
-	if (clk->parent)
-		__clk_enable(clk->parent);
-
-	if (clk->use_cnt++ == 0) {
-		if (clk_is_pll1(clk)) {	/* PLL1 */
-			chipcHw_pll1Enable(clk->rate_hz, 0);
-		} else if (clk_is_pll2(clk)) {	/* PLL2 */
-			chipcHw_pll2Enable(clk->rate_hz);
-		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
-			if (!clk_is_primary(clk))
-				chipcHw_bypassClockEnable(clk->csp_id);
-		} else {	/* source is PLL */
-			chipcHw_setClockEnable(clk->csp_id);
-		}
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	BUG_ON(clk->use_cnt == 0);
-
-	if (--clk->use_cnt == 0) {
-		if (clk_is_pll1(clk)) {	/* PLL1 */
-			chipcHw_pll1Disable();
-		} else if (clk_is_pll2(clk)) {	/* PLL2 */
-			chipcHw_pll2Disable();
-		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
-			if (!clk_is_primary(clk))
-				chipcHw_bypassClockDisable(clk->csp_id);
-		} else {	/* source is PLL */
-			chipcHw_setClockDisable(clk->csp_id);
-		}
-	}
-
-	if (clk->parent)
-		__clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0;
-
-	return clk->rate_hz;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	unsigned long actual;
-	unsigned long rate_hz;
-
-	if (!clk)
-		return -EINVAL;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (clk->use_cnt)
-		return -EBUSY;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	actual = clk->parent->rate_hz;
-	rate_hz = min(actual, rate);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return rate_hz;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	unsigned long actual;
-	unsigned long rate_hz;
-
-	if (!clk)
-		return -EINVAL;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (clk->use_cnt)
-		return -EBUSY;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	actual = clk->parent->rate_hz;
-	rate_hz = min(actual, rate);
-	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
-	clk->rate_hz = rate_hz;
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	if (!clk)
-		return NULL;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	struct clk *old_parent;
-
-	if (!clk || !parent)
-		return -EINVAL;
-
-	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
-		return -EINVAL;
-
-	/* if more than one user, parent is not allowed */
-	if (clk->use_cnt > 1)
-		return -EBUSY;
-
-	if (clk->parent == parent)
-		return 0;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	old_parent = clk->parent;
-	clk->parent = parent;
-	if (clk_is_using_xtal(parent))
-		clk->mode |= CLK_MODE_XTAL;
-	else
-		clk->mode &= (~CLK_MODE_XTAL);
-
-	/* if clock is active */
-	if (clk->use_cnt != 0) {
-		clk->use_cnt--;
-		/* enable clock with the new parent */
-		__clk_enable(clk);
-		/* disable the old parent */
-		__clk_disable(old_parent);
-	}
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
deleted file mode 100644
index 5e0b98138973..000000000000
--- a/arch/arm/mach-bcmring/clock.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#include <mach/csp/chipcHw_def.h>
-
-#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
-#define CLK_TYPE_PLL1            2	/* PPL1 */
-#define CLK_TYPE_PLL2            4	/* PPL2 */
-#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
-#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
-
-#define CLK_MODE_XTAL            1	/* clock source is from crystal */
-
-struct clk {
-	const char *name;	/* clock name */
-	unsigned int type;	/* clock type */
-	unsigned int mode;	/* current mode */
-	volatile int use_bypass;	/* indicate if it's in bypass mode */
-	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
-	unsigned long rate_hz;	/* clock rate in Hz */
-	unsigned int use_cnt;	/* usage count */
-	struct clk *parent;	/* parent clock */
-};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
deleted file mode 100644
index adbfb1994582..000000000000
--- a/arch/arm/mach-bcmring/core.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- *  derived from linux/arch/arm/mach-versatile/core.c
- *  linux/arch/arm/mach-bcmring/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* Portions copyright Broadcom 2008 */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/clkdev.h>
-
-#include <mach/csp/mm_addr.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <cfg_global.h>
-
-#include "clock.h"
-
-#include <csp/secHw.h>
-#include <mach/csp/secHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-#include <mach/csp/tmrHw_reg.h>
-
-static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
-static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
-
-static struct clk pll1_clk = {
-	.name = "PLL1",
-	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
-	.rate_hz = 2000000000,
-	.use_cnt = 7,
-};
-
-static struct clk uart_clk = {
-	.name = "UART",
-	.type = CLK_TYPE_PROGRAMMABLE,
-	.csp_id = chipcHw_CLOCK_UART,
-	.rate_hz = HW_CFG_UART_CLK_HZ,
-	.parent = &pll1_clk,
-};
-
-static struct clk dummy_apb_pclk = {
-	.name = "BUSCLK",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-};
-
-/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
-#if defined(CONFIG_ARCH_FPGA11107)
-/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
-/* slow down Linux's sense of time */
-#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
-#else
-#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
-#endif
-
-static struct clk sp804_timer012_clk = {
-	.name = "sp804-timer-0,1,2",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-	.rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
-};
-
-static struct clk sp804_timer3_clk = {
-	.name = "sp804-timer-3",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-	.rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
-};
-
-static struct clk_lookup lookups[] = {
-	{			/* Bus clock */
-		.con_id = "apb_pclk",
-		.clk = &dummy_apb_pclk,
-	}, {			/* UART0 */
-		.dev_id = "uarta",
-		.clk = &uart_clk,
-	}, {			/* UART1 */
-		.dev_id = "uartb",
-		.clk = &uart_clk,
-	}, {			/* SP804 timer 0 */
-		.dev_id = "sp804",
-		.con_id = "timer0",
-		.clk = &sp804_timer012_clk,
-	}, {			/* SP804 timer 1 */
-		.dev_id = "sp804",
-		.con_id = "timer1",
-		.clk = &sp804_timer012_clk,
-	}, {			/* SP804 timer 3 */
-		.dev_id = "sp804",
-		.con_id = "timer3",
-		.clk = &sp804_timer3_clk,
-	}
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uartA_device,
-	&uartB_device,
-};
-
-void __init bcmring_amba_init(void)
-{
-	int i;
-	u32 bus_clock;
-
-/* Linux is run initially in non-secure mode. Secure peripherals */
-/* generate FIQ, and must be handled in secure mode. Until we have */
-/* a linux security monitor implementation, keep everything in */
-/* non-secure mode. */
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
-	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
-			  secHw_BLK_MASK_KEY_SCAN |
-			  secHw_BLK_MASK_TOUCH_SCREEN |
-			  secHw_BLK_MASK_UART0 |
-			  secHw_BLK_MASK_UART1 |
-			  secHw_BLK_MASK_WATCHDOG |
-			  secHw_BLK_MASK_SPUM |
-			  secHw_BLK_MASK_DDR2 |
-			  secHw_BLK_MASK_SPU |
-			  secHw_BLK_MASK_PKA |
-			  secHw_BLK_MASK_RNG |
-			  secHw_BLK_MASK_RTC |
-			  secHw_BLK_MASK_OTP |
-			  secHw_BLK_MASK_BOOT |
-			  secHw_BLK_MASK_MPU |
-			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
-
-	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
-	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
-	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
-	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
-	bus_clock = chipcHw_REG_BUS_CLOCK_GE
-	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
-
-	chipcHw_busInterfaceClockEnable(bus_clock);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		((void __iomem *)MM_IO_BASE_TMR)
-#define TIMER1_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x20))
-#define TIMER2_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x40))
-#define TIMER3_VA_BASE          ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
-
-static int __init bcmring_clocksource_init(void)
-{
-	/* setup timer1 as free-running clocksource */
-	sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
-
-	/* setup timer3 as free-running clocksource */
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-
-	return 0;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init bcmring_init_timer(void)
-{
-	printk(KERN_INFO "bcmring_init_timer\n");
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	bcmring_clocksource_init();
-
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
-}
-
-struct sys_timer bcmring_timer = {
-	.init = bcmring_init_timer,
-};
-
-void __init bcmring_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
deleted file mode 100644
index e0e02c48f9b1..000000000000
--- a/arch/arm/mach-bcmring/core.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* Portions copyright Broadcom 2008 */
-#ifndef __ASM_ARCH_BCMRING_H
-#define __ASM_ARCH_BCMRING_H
-
-void __init bcmring_amba_init(void);
-void __init bcmring_map_io(void);
-void __init bcmring_init_irq(void);
-void __init bcmring_init_early(void);
-
-extern struct sys_timer bcmring_timer;
-#endif
diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
deleted file mode 100644
index 648c0377530e..000000000000
--- a/arch/arm/mach-bcmring/csp/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-y += dmac/
-obj-y += tmr/
-obj-y += chipc/
diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
deleted file mode 100644
index 673952768ee5..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
deleted file mode 100644
index 96273ff34956..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ /dev/null
@@ -1,776 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw.c
-*
-*  @brief   Low level Various CHIP clock controlling routines
-*
-*  @note
-*
-*   These routines provide basic clock controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-
-/* VPM alignment algorithm uses this */
-#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
-#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
-
-/* Local definition of clock type */
-#define PLL_CLOCK                      1	/* PLL Clock */
-#define NON_PLL_CLOCK                  2	/* Divider clock */
-
-static int chipcHw_divide(int num, int denom)
-    __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in hertz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    ) {
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
-	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
-	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
-	uint32_t dependentClockType = 0;
-	uint32_t vcoHz = 0;
-
-	/* Get VCO frequencies */
-	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		uint64_t adjustFreq = 0;
-
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
-		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
-			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
-			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
-		vcoFreqPll1Hz += (uint32_t) adjustFreq;
-	} else {
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-	}
-	vcoFreqPll2Hz =
-	    chipcHw_XTAL_FREQ_Hz *
-		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		pPLLReg = &pChipcHw->DDRClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_VPM:
-		pPLLReg = &pChipcHw->VPMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		pDependentClock = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		pDependentClock = &pChipcHw->ACLKClock;
-		dependentClockType = NON_PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		pDependentClock = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		/* Obtain PLL clock frequency */
-		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
-			/* Return crystal clock frequency when bypassed */
-			return chipcHw_XTAL_FREQ_Hz;
-		} else if (clock == chipcHw_CLOCK_DDR) {
-			/* DDR frequency is configured in PLLDivider register */
-			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
-		} else {
-			/* From chip revision number B0, LCD clock is internally divided by 2 */
-			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
-				vcoHz >>= 1;
-			}
-			/* Obtain PLL clock frequency using VCO dividers */
-			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
-		}
-	} else if (pClockCtrl) {
-		/* Obtain divider clock frequency */
-		uint32_t div;
-		uint32_t freq = 0;
-
-		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
-			/* Return crystal clock frequency when bypassed */
-			return chipcHw_XTAL_FREQ_Hz;
-		} else if (pDependentClock) {
-			/* Identify the dependent clock frequency */
-			switch (dependentClockType) {
-			case PLL_CLOCK:
-				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
-					/* Use crystal clock frequency when dependent PLL clock is bypassed */
-					freq = chipcHw_XTAL_FREQ_Hz;
-				} else {
-					/* Obtain PLL clock frequency using VCO dividers */
-					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
-					freq = div ? chipcHw_divide(vcoHz, div) : 0;
-				}
-				break;
-			case NON_PLL_CLOCK:
-				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
-					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
-				} else {
-					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
-						/* Use crystal clock frequency when dependent divider clock is bypassed */
-						freq = chipcHw_XTAL_FREQ_Hz;
-					} else {
-						/* Obtain divider clock frequency using XTAL dividers */
-						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
-					}
-				}
-				break;
-			}
-		} else {
-			/* Dependent on crystal clock */
-			freq = chipcHw_XTAL_FREQ_Hz;
-		}
-
-		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-		return chipcHw_divide(freq, (div ? div : 256));
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in Hz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
-				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
-    ) {
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
-	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
-	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
-	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
-	uint32_t dependentClockType = 0;
-	uint32_t vcoHz = 0;
-	uint32_t desVcoHz = 0;
-
-	/* Get VCO frequencies */
-	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		uint64_t adjustFreq = 0;
-
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
-		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
-			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
-			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
-		vcoFreqPll1Hz += (uint32_t) adjustFreq;
-
-		/* Desired VCO frequency */
-		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
-	} else {
-		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-	}
-	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		/* Configure the DDR_ctrl:BUS ratio settings */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
-			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
-				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-		pPLLReg = &pChipcHw->DDRClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_VPM:
-		/* Configure the VPM:BUS ratio settings */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
-				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-		pPLLReg = &pChipcHw->VPMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		pDependentClock = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		pDependentClock = &pChipcHw->ACLKClock;
-		dependentClockType = NON_PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		pDependentClock = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		/* Select XTAL as bypass source */
-		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
-		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-		/* For DDR settings use only the PLL divider clock */
-		if (pPLLReg == &pChipcHw->DDRClock) {
-			/* Set M1DIV for PLL1, which controls the DDR clock */
-			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
-			/* Calculate expected frequency */
-			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
-		} else {
-			/* From chip revision number B0, LCD clock is internally divided by 2 */
-			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
-				desVcoHz >>= 1;
-				vcoHz >>= 1;
-			}
-			/* Set MDIV to change the frequency */
-			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
-			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
-			/* Calculate expected frequency */
-			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
-		}
-		/* Wait for for atleast 200ns as per the protocol to change frequency */
-		udelay(1);
-		/* Do not bypass */
-		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-		/* Return the configured frequency */
-		return freq;
-	} else if (pClockCtrl) {
-		uint32_t divider = 0;
-
-		/* Divider clock should not be bypassed  */
-		reg32_modify_and(pClockCtrl,
-				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-
-		/* Identify the clock source */
-		if (pDependentClock) {
-			switch (dependentClockType) {
-			case PLL_CLOCK:
-				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
-				break;
-			case NON_PLL_CLOCK:
-				{
-					uint32_t sourceClock = 0;
-
-					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
-						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
-					} else {
-						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
-					}
-					divider = chipcHw_divide(sourceClock, freq);
-				}
-				break;
-			}
-		} else {
-			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
-		}
-
-		if (divider) {
-			REG_LOCAL_IRQ_SAVE;
-			/* Set the divider to obtain the required frequency */
-			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
-			REG_LOCAL_IRQ_RESTORE;
-			return freq;
-		}
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(chipcHw_setClockFrequency);
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success (# of adjustment required)
-*            -1 : On failure
-*
-*/
-/****************************************************************************/
-static int vpmPhaseAlignA0(void)
-{
-	uint32_t phaseControl;
-	uint32_t phaseValue;
-	uint32_t prevPhaseComp;
-	int iter = 0;
-	int adjustCount = 0;
-	int count = 0;
-
-	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
-		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
-		phaseValue = 0;
-		prevPhaseComp = 0;
-
-		/* Step 1: Look for falling PH_COMP transition */
-
-		/* Read the contents of VPM Clock resgister */
-		phaseValue = pChipcHw->VPMClock;
-		do {
-			/* Store previous value of phase comparator */
-			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Read the contents of  VPM Clock resgister. */
-			phaseValue = pChipcHw->VPMClock;
-
-			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
-				phaseControl = (0x3F & (phaseControl - 1));
-			} else {
-				/* Increment to the Phase count value for next write, if Phase is not stable. */
-				phaseControl = (0x3F & (phaseControl + 1));
-			}
-			/* Count number of adjustment made */
-			adjustCount++;
-		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
-			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
-			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
-		    );
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
-
-		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
-			phaseControl = (0x3F & (phaseControl + 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if (count != 5) {
-			/* Detected false transition */
-			continue;
-		}
-
-		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
-
-		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
-			phaseControl = (0x3F & (phaseControl - 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if (count != 3) {
-			/* Detected noisy transition */
-			continue;
-		}
-
-		/* Step 4: Keep moving backward before the original transition took place. */
-
-		for (count = 0; (count < 5); count++) {
-			phaseControl = (0x3F & (phaseControl - 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
-			/* Detected false transition */
-			continue;
-		}
-
-		/* Step 5: Re discover the valid transition */
-
-		do {
-			/* Store previous value of phase comparator */
-			prevPhaseComp = phaseValue;
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^=
-			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Read the contents of  VPM Clock resgister. */
-			phaseValue = pChipcHw->VPMClock;
-
-			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
-				phaseControl = (0x3F & (phaseControl - 1));
-			} else {
-				/* Increment to the Phase count value for next write, if Phase is not stable. */
-				phaseControl = (0x3F & (phaseControl + 1));
-			}
-
-			/* Count number of adjustment made */
-			adjustCount++;
-		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
-			return -1;
-		} else {
-			/* Valid phase must have detected */
-			break;
-		}
-	}
-
-	/* For VPM Phase should be perfectly aligned. */
-	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
-		/* Load new phase value */
-		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-	/* Return the status */
-	return (int)adjustCount;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success (# of adjustment required)
-*            -1 : On failure
-*
-*/
-/****************************************************************************/
-int chipcHw_vpmPhaseAlign(void)
-{
-
-	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
-		return vpmPhaseAlignA0();
-	} else {
-		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
-		uint32_t phaseValue = 0;
-		int adjustCount = 0;
-
-		/* Disable VPM access */
-		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-		/* Disable HW VPM phase alignment  */
-		chipcHw_vpmHwPhaseAlignDisable();
-		/* Enable SW VPM phase alignment  */
-		chipcHw_vpmSwPhaseAlignEnable();
-		/* Adjust VPM phase */
-		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
-			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
-
-			/* Adjust phase control value */
-			if (phaseValue > 0xF) {
-				/* Increment phase control value */
-				phaseControl++;
-			} else if (phaseValue < 0xF) {
-				/* Decrement phase control value */
-				phaseControl--;
-			} else {
-				/* Enable VPM access */
-				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-				/* Return adjust count */
-				return adjustCount;
-			}
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Count adjustment */
-			adjustCount++;
-		}
-	}
-
-	/* Disable VPM access */
-	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-	return -1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Local Divide function
-*
-*  This function does the divide
-*
-*  @return divide value
-*
-*/
-/****************************************************************************/
-static int chipcHw_divide(int num, int denom)
-{
-	int r;
-	int t = 1;
-
-	/* Shift denom and t up to the largest value to optimize algorithm */
-	/* t contains the units of each divide */
-	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
-		denom = denom << 1;
-		t = t << 1;
-	}
-
-	/* Initialize the result */
-	r = 0;
-
-	do {
-		/* Determine if there exists a positive remainder */
-		if ((num - denom) >= 0) {
-			/* Accumlate t to the result and calculate a new remainder */
-			num = num - denom;
-			r = r + t;
-		}
-		/* Continue to shift denom and shift t down to 0 */
-		denom = denom >> 1;
-		t = t >> 1;
-	} while (t != 0);
-
-	return r;
-}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
deleted file mode 100644
index 367df75d4bb3..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_init.c
-*
-*  @brief   Low level CHIPC PLL configuration functions
-*
-*  @note
-*
-*   These routines provide basic PLL controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-/* ---- Private Constants and Types --------------------------------------- */
-
-/*
-    Calculation for NDIV_i to obtain VCO frequency
-    -----------------------------------------------
-
-	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
-	for Freq_vco = VCO_FREQ_MHz
-		Freq_ref = chipcHw_XTAL_FREQ_Hz
-		PLL_P1 = PLL_P2 = 1
-		and
-		PLL_NDIV_f = 0
-
-	We get:
-		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
-
-    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
-    -----------------------------------------------------------------
-		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
-
-		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
-*/
-
-/* ---- Private Variables ------------------------------------------------- */
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL2
-*
-*  This function initializes the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz)
-{
-	uint32_t pllPreDivider2 = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		pChipcHw->PLLConfig2 =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-
-		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider2 = pllPreDivider2;
-		/* Set NDIV Frac */
-		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
-
-		/* This has to be removed once the default values are fixed for PLL2. */
-		pChipcHw->PLLControl12 = 0x38000700;
-		pChipcHw->PLLControl22 = 0x00000015;
-
-		/* Reset PLL2 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-		REG_LOCAL_IRQ_RESTORE;
-	}
-
-	/* Insert certain amount of delay before deasserting ARESET. */
-	udelay(1);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove analog reset and Power on the PLL */
-		pChipcHw->PLLConfig2 &=
-		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-
-		REG_LOCAL_IRQ_RESTORE;
-
-	}
-
-	/* Wait until PLL is locked */
-	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-		;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove digital reset */
-		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll2Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL1
-*
-*  This function initializes the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
-{
-	uint32_t pllPreDivider = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->PLLConfig =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-		/* Setting VCO frequency */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pllPreDivider =
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
-			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
-			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		} else {
-			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		}
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider = pllPreDivider;
-		/* Set NDIV Frac */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
-		} else {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
-		}
-
-		/* Reset PLL1 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-
-		REG_LOCAL_IRQ_RESTORE;
-
-		/* Insert certain amount of delay before deasserting ARESET. */
-		udelay(1);
-
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Remove analog reset and Power on the PLL */
-			pChipcHw->PLLConfig &=
-			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-
-		/* Wait until PLL is locked */
-		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
-		       || !(pChipcHw->
-			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-			;
-
-		/* Remove digital reset */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-			REG_LOCAL_IRQ_RESTORE;
-		}
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll1Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the chipc module
-*
-*  This function initializes the PLLs and core system clocks
-*
-*/
-/****************************************************************************/
-
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) {
-#if !(defined(__KERNEL__) && !defined(STANDALONE))
-	delay_init();
-#endif
-
-	/* Do not program PLL, when warm reset */
-	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
-		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
-				   initParam->ssSupport);
-		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
-	} else {
-		/* Clear sticky bits */
-		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
-	}
-	/* Clear sticky bits */
-	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
-
-	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
-	pChipcHw->ACLKClock =
-	    (pChipcHw->
-	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
-								 armBusRatio &
-								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
-
-	/* Set various core component frequencies. The order in which this is done is important for some. */
-	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
-	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
-	/* then VPM and RTBUS. */
-
-	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
-				  initParam->busClockFreqHz *
-				  initParam->armBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
-				  initParam->busClockFreqHz *
-				  initParam->vpmBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
-				  initParam->busClockFreqHz *
-				  initParam->ddrBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
-				  initParam->busClockFreqHz / 2);
-}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
deleted file mode 100644
index 2671d8896bbb..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-#include <csp/intcHw.h>
-#include <csp/cache.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-/* ---- Private Variables ------------------------------------------------- */
-void chipcHw_reset_run_from_aram(void);
-
-typedef void (*RUNFUNC) (void);
-
-/****************************************************************************/
-/**
-*  @brief   warmReset
-*
-*  @note warmReset configures the clocks which are not reset back to the state
-*   required to execute on reset.  To do so we need to copy the code into internal
-*   memory to change the ARM clock while we are not executing from DDR.
-*/
-/****************************************************************************/
-void chipcHw_reset(uint32_t mask)
-{
-	int i = 0;
-	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
-
-	/* Disable all interrupts */
-	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
-	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
-	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
-			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-		/* Bypass the PLL clocks before reboot */
-		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
-		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
-
-		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
-		do {
-			((uint32_t *) MM_IO_BASE_ARAM)[i] =
-			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
-			i++;
-		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
-
-		CSP_CACHE_FLUSH_ALL;
-
-		/* run the function from ARAM */
-		runFunc();
-
-		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/* This function must run from internal memory */
-void chipcHw_reset_run_from_aram(void)
-{
-/* Make sure, pipeline is filled with instructions coming from ARAM */
-__asm (" nop                                                            \n\t"
-		" nop                                                            \n\t"
-#if defined(__KERNEL__) && !defined(STANDALONE)
-		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
-		" BIC      r0,r0,#0xd                                            \n\t"
-		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-#endif
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-/* Bypass the ARM clock and switch to XTAL clock */
-		" MOV      r2,#0x80000000                                        \n\t"
-		" LDR      r3,[r2,#8]                                            \n\t"
-		" ORR      r3,r3,#0x20000                                        \n\t"
-		" STR      r3,[r2,#8]                                            \n\t"
-
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-/* Issue reset */
-		" MOV      r3,#0x2                                               \n\t"
-		" STR      r3,[r2,#0x80]                                         \n\t"
-/* End here */
-		" MOV      pc,pc                                                 \n\t");
-/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
-}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
deleted file mode 100644
index 54ad964fe94c..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*****************************************************************************
-* Copyright 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-/****************************************************************************/
-/**
-*  @file    chipcHw_str.c
-*
-*  @brief   Contains strings which are useful to linux and csp
-*
-*  @note
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <mach/csp/chipcHw_inline.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-
-static const char *gMuxStr[] = {
-	"GPIO",			/* 0 */
-	"KeyPad",		/* 1 */
-	"I2C-Host",		/* 2 */
-	"SPI",			/* 3 */
-	"Uart",			/* 4 */
-	"LED-Mtx-P",		/* 5 */
-	"LED-Mtx-S",		/* 6 */
-	"SDIO-0",		/* 7 */
-	"SDIO-1",		/* 8 */
-	"PCM",			/* 9 */
-	"I2S",			/* 10 */
-	"ETM",			/* 11 */
-	"Debug",		/* 12 */
-	"Misc",			/* 13 */
-	"0xE",			/* 14 */
-	"0xF",			/* 15 */
-};
-
-/****************************************************************************/
-/**
-*  @brief   Retrieves a string representation of the mux setting for a pin.
-*
-*  @return  Pointer to a character string.
-*/
-/****************************************************************************/
-
-const char *chipcHw_getGpioPinFunctionStr(int pin)
-{
-	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
-		return "";
-	}
-
-	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
-}
diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
deleted file mode 100644
index fb1104fe56b2..000000000000
--- a/arch/arm/mach-bcmring/csp/dmac/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
deleted file mode 100644
index 6b9be2e98e51..000000000000
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ /dev/null
@@ -1,917 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw.c
-*
-*  @brief   Low level DMA controller driver routines
-*
-*  @note
-*
-*   These routines provide basic DMA functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/string.h>
-#include <stddef.h>
-
-#include <csp/dmacHw.h>
-#include <mach/csp/dmacHw_reg.h>
-#include <mach/csp/dmacHw_priv.h>
-#include <mach/csp/chipcHw_inline.h>
-
-/* ---- External Function Prototypes ------------------------------------- */
-
-/* Allocate DMA control blocks */
-dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
-
-uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
-uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
-
-/****************************************************************************/
-/**
-*  @brief   Get maximum FIFO for a DMA channel
-*
-*  @return  Maximum allowable FIFO size
-*
-*
-*/
-/****************************************************************************/
-static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	uint32_t val = 0;
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_MISC_t *pMiscReg =
-	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
-
-	switch (pCblk->channel) {
-	case 0:
-		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
-		break;
-	case 1:
-		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
-		break;
-	case 2:
-		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
-		break;
-	case 3:
-		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
-		break;
-	case 4:
-		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
-		break;
-	case 5:
-		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
-		break;
-	case 6:
-		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
-		break;
-	case 7:
-		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
-		break;
-	}
-
-	if (val <= 0x4) {
-		return 8 << val;
-	} else {
-		dmacHw_ASSERT(0);
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to initiate transfer
-*
-*  @return  void
-*
-*
-*  @note
-*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
-*     - This function should also be called from ISR to program the channel with
-*       pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pProg;
-	dmacHw_CBLK_t *pCblk;
-
-	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		/* Not safe yet to program the channel */
-		return;
-	}
-
-	if (pCblk->varDataStarted) {
-		if (pCblk->descUpdated) {
-			pCblk->descUpdated = 0;
-			pProg =
-			    (dmacHw_DESC_t *) ((uint32_t)
-					       dmacHw_REG_LLP(pCblk->module,
-							      pCblk->channel) +
-					       pRing->virt2PhyOffset);
-
-			/* Load descriptor if not loaded */
-			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
-				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
-					       pProg->sar);
-				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
-					       pProg->dar);
-				dmacHw_REG_CTL_LO(pCblk->module,
-						  pCblk->channel) =
-				    pProg->ctl.lo;
-				dmacHw_REG_CTL_HI(pCblk->module,
-						  pCblk->channel) =
-				    pProg->ctl.hi;
-			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
-				/* Return as end descriptor is processed */
-				return;
-			} else {
-				dmacHw_ASSERT(0);
-			}
-		} else {
-			return;
-		}
-	} else {
-		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
-			/* Do not make a single chain, rather process one descriptor at a time */
-			pProg = pRing->pHead;
-			/* Point to the next descriptor for next iteration */
-			dmacHw_NEXT_DESC(pRing, pHead);
-		} else {
-			/* Return if no more pending descriptor */
-			if (pRing->pEnd == NULL) {
-				return;
-			}
-
-			pProg = pRing->pProg;
-			if (pConfig->transferMode ==
-			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
-				/* Make sure a complete ring can be formed */
-				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
-					      llp == pRing->pProg);
-				/* Make sure pProg pointing to the pHead */
-				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
-					      pRing->pHead);
-				/* Make a complete ring */
-				do {
-					pRing->pProg->ctl.lo |=
-					    (dmacHw_REG_CTL_LLP_DST_EN |
-					     dmacHw_REG_CTL_LLP_SRC_EN);
-					pRing->pProg =
-					    (dmacHw_DESC_t *) pRing->pProg->llp;
-				} while (pRing->pProg != pRing->pHead);
-			} else {
-				/* Make a single long chain */
-				while (pRing->pProg != pRing->pEnd) {
-					pRing->pProg->ctl.lo |=
-					    (dmacHw_REG_CTL_LLP_DST_EN |
-					     dmacHw_REG_CTL_LLP_SRC_EN);
-					pRing->pProg =
-					    (dmacHw_DESC_t *) pRing->pProg->llp;
-				}
-			}
-		}
-
-		/* Program the channel registers */
-		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
-		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
-		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
-			       (uint32_t) pProg - pRing->virt2PhyOffset);
-		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
-		    pProg->ctl.lo;
-		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
-		    pProg->ctl.hi;
-		if (pRing->pEnd) {
-			/* Remember the descriptor to use next */
-			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
-		}
-		/* Indicate no more pending descriptor  */
-		pRing->pEnd = (dmacHw_DESC_t *) NULL;
-	}
-	/* Start DMA operation */
-	dmacHw_DMA_START(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes DMA
-*
-*  This function initializes DMA CSP driver
-*
-*  @note
-*     Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void)
-{
-
-	uint32_t i = 0;
-
-	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
-	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
-
-	/* Enable access to the DMA block */
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
-
-	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
-		dmacHw_ASSERT(0);
-	}
-
-	memset((void *)dmacHw_gCblk, 0,
-	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
-	for (i = 0; i < dmaChannelCount_0; i++) {
-		dmacHw_gCblk[i].module = 0;
-		dmacHw_gCblk[i].channel = i;
-	}
-	for (i = 0; i < dmaChannelCount_1; i++) {
-		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
-		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Exit function for  DMA
-*
-*  This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void)
-{
-	/* Disable access to the DMA block */
-	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
-	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets a handle to a DMA channel
-*
-*  This function returns a handle, representing a control block of a particular DMA channel
-*
-*  @return  -1       - On Failure
-*            handle  - On Success, representing a channel control block
-*
-*  @note
-*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
-    ) {
-	int idx;
-
-	switch ((channelId >> 8)) {
-	case 0:
-		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
-		idx = (channelId & 0xff);
-		break;
-	case 1:
-		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
-		idx = dmaChannelCount_0 + (channelId & 0xff);
-		break;
-	default:
-		dmacHw_ASSERT(0);
-		return (dmacHw_HANDLE_t) -1;
-	}
-
-	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes a DMA channel for use
-*
-*  This function initializes and resets a DMA channel for use
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	int module = pCblk->module;
-	int channel = pCblk->channel;
-
-	/* Reinitialize the control block */
-	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
-	pCblk->module = module;
-	pCblk->channel = channel;
-
-	/* Enable DMA controller */
-	dmacHw_DMA_ENABLE(pCblk->module);
-	/* Reset DMA channel */
-	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
-
-	/* Clear all raw interrupt status */
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-
-	/* Mask event specific interrupts */
-	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief  Finds amount of memory required to form a descriptor ring
-*
-*
-*  @return   Number of bytes required to form a descriptor ring
-*
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
-    ) {
-	/* Need extra 4 byte to ensure 32 bit alignment  */
-	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
-		sizeof(uint32_t);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes descriptor ring
-*
-*  This function will initializes the descriptor ring of a DMA channel
-*
-*
-*  @return   -1 - On failure
-*             0 - On success
-*  @note
-*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
-*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
-*       accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
-			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
-			  uint32_t len,	/*  [ IN ] Size of the pBuf */
-			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
-    ) {
-	uint32_t i;
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pDesc;
-
-	/* Check the alignment of the descriptor */
-	if ((uint32_t) pDescriptorVirt & 0x00000003) {
-		dmacHw_ASSERT(0);
-		return -1;
-	}
-
-	/* Check if enough space has been allocated for descriptor ring */
-	if (len < dmacHw_descriptorLen(num)) {
-		return -1;
-	}
-
-	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
-	pRing->pHead =
-	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
-	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
-	pRing->pProg = dmacHw_DESC_INIT;
-	/* Initialize link item chain, starting from the head */
-	pDesc = pRing->pHead;
-	/* Find the offset between virtual to physical address */
-	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
-
-	/* Form the descriptor ring */
-	for (i = 0; i < num - 1; i++) {
-		/* Clear link list item */
-		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
-		/* Point to the next item in the physical address */
-		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
-		/* Point to the next item in the virtual address */
-		pDesc->llp = (uint32_t) (pDesc + 1);
-		/* Mark descriptor is ready to use */
-		pDesc->ctl.hi = dmacHw_DESC_FREE;
-		/* Look into next link list item */
-		pDesc++;
-	}
-
-	/* Clear last link list item */
-	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
-	/* Last item pointing to the first item in the
-	   physical address to complete the ring */
-	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
-	/* Last item pointing to the first item in the
-	   virtual address to complete the ring
-	 */
-	pDesc->llp = (uint32_t) pRing->pHead;
-	/* Mark descriptor is ready to use */
-	pDesc->ctl.hi = dmacHw_DESC_FREE;
-	/* Set the number of descriptors in the ring */
-	pRing->num = num;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configure DMA channel
-*
-*  @return  0  : On success
-*           -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	uint32_t cfgHigh = 0;
-	int srcTrSize;
-	int dstTrSize;
-
-	pCblk->varDataStarted = 0;
-	pCblk->userData = NULL;
-
-	/* Configure
-	   - Burst transaction when enough data in available in FIFO
-	   - AHB Access protection 1
-	   - Source and destination peripheral ports
-	 */
-	cfgHigh =
-	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
-	    dmacHw_SRC_PERI_INTF(pConfig->
-				 srcPeripheralPort) |
-	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
-	/* Set priority */
-	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
-				    pConfig->channelPriority);
-
-	if (pConfig->dstStatusRegisterAddress != 0) {
-		/* Destination status update enable */
-		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
-		/* Configure status registers */
-		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
-				   pConfig->dstStatusRegisterAddress);
-	}
-
-	if (pConfig->srcStatusRegisterAddress != 0) {
-		/* Source status update enable */
-		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
-		/* Source status update enable */
-		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
-				   pConfig->srcStatusRegisterAddress);
-	}
-	/* Configure the config high register */
-	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
-
-	/* Clear all raw interrupt status */
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-
-	/* Configure block interrupt */
-	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure complete transfer interrupt */
-	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure error interrupt */
-	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure gather register */
-	if (pConfig->srcGatherWidth) {
-		srcTrSize =
-		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-		if (!
-		    ((pConfig->srcGatherWidth % srcTrSize)
-		     && (pConfig->srcGatherJump % srcTrSize))) {
-			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
-			    ((pConfig->srcGatherWidth /
-			      srcTrSize) << 20) | (pConfig->srcGatherJump /
-						   srcTrSize);
-		} else {
-			return -1;
-		}
-	}
-	/* Configure scatter register */
-	if (pConfig->dstScatterWidth) {
-		dstTrSize =
-		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-		if (!
-		    ((pConfig->dstScatterWidth % dstTrSize)
-		     && (pConfig->dstScatterJump % dstTrSize))) {
-			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
-			    ((pConfig->dstScatterWidth /
-			      dstTrSize) << 20) | (pConfig->dstScatterJump /
-						   dstTrSize);
-		} else {
-			return -1;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indicates whether DMA transfer is in progress or completed
-*
-*  @return   DMA transfer status
-*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
-*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
-*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		return dmacHw_TRANSFER_STATUS_BUSY;
-	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
-		   (0x00000001 << pCblk->channel)) {
-		return dmacHw_TRANSFER_STATUS_ERROR;
-	}
-
-	return dmacHw_TRANSFER_STATUS_DONE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptors for known data length
-*
-*  When DMA has to work as a flow controller, this function prepares the
-*  descriptor chain to transfer data
-*
-*  from:
-*          - Memory to memory
-*          - Peripheral to memory
-*          - Memory to Peripheral
-*          - Peripheral to Peripheral
-*
-*  @return   -1 - On failure
-*             0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-			     size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
-	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	dmacHw_DESC_t *pStart;
-	dmacHw_DESC_t *pProg;
-	int srcTs = 0;
-	int blkTs = 0;
-	int oddSize = 0;
-	int descCount = 0;
-	int count = 0;
-	int dstTrSize = 0;
-	int srcTrSize = 0;
-	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
-
-	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-
-	/* Skip Tx if buffer is NULL  or length is unknown */
-	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
-		/* Do not initiate transfer */
-		return -1;
-	}
-
-	/* Ensure scatter and gather are transaction aligned */
-	if ((pConfig->srcGatherWidth % srcTrSize)
-	    || (pConfig->dstScatterWidth % dstTrSize)) {
-		return -2;
-	}
-
-	/*
-	   Background 1: DMAC can not perform DMA if source and destination addresses are
-	   not properly aligned with the channel's transaction width. So, for successful
-	   DMA transfer, transaction width must be set according to the alignment of the
-	   source and destination address.
-	 */
-
-	/* Adjust destination transaction width if destination address is not aligned properly */
-	dstTrWidth = pConfig->dstMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
-		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
-		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
-	}
-
-	/* Adjust source transaction width if source address is not aligned properly */
-	srcTrWidth = pConfig->srcMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
-		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
-		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
-	}
-
-	/* Find the maximum transaction per descriptor */
-	if (pConfig->maxDataPerBlock
-	    && ((pConfig->maxDataPerBlock / srcTrSize) <
-		dmacHw_MAX_BLOCKSIZE)) {
-		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
-	}
-
-	/* Find number of source transactions needed to complete the DMA transfer */
-	srcTs = dataLen / srcTrSize;
-	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
-	if (srcTs && (dstTrSize > srcTrSize)) {
-		oddSize = dataLen % dstTrSize;
-		/* Adjust source transaction count due to "oddSize" */
-		srcTs = srcTs - (oddSize / srcTrSize);
-	} else {
-		oddSize = dataLen % srcTrSize;
-	}
-	/* Adjust "descCount" due to "oddSize" */
-	if (oddSize) {
-		descCount++;
-	}
-	/* Find the number of descriptor needed for total "srcTs" */
-	if (srcTs) {
-		descCount += ((srcTs - 1) / maxBlockSize) + 1;
-	}
-
-	/* Check the availability of "descCount" discriptors in the ring */
-	pProg = pRing->pHead;
-	for (count = 0; (descCount <= pRing->num) && (count < descCount);
-	     count++) {
-		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
-			/* Sufficient descriptors are not available */
-			return -3;
-		}
-		pProg = (dmacHw_DESC_t *) pProg->llp;
-	}
-
-	/* Remember the link list item to program the channel registers */
-	pStart = pProg = pRing->pHead;
-	/* Make a link list with "descCount(=count)" number of descriptors */
-	while (count) {
-		/* Reset channel control information */
-		pProg->ctl.lo = 0;
-		/* Enable source gather if configured */
-		if (pConfig->srcGatherWidth) {
-			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
-		}
-		/* Enable destination scatter if configured */
-		if (pConfig->dstScatterWidth) {
-			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
-		}
-		/* Set source and destination address */
-		pProg->sar = (uint32_t) pSrcAddr;
-		pProg->dar = (uint32_t) pDstAddr;
-		/* Use "devCtl" to mark that user memory need to be freed later if needed */
-		if (pProg == pRing->pHead) {
-			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
-		} else {
-			pProg->devCtl = 0;
-		}
-
-		blkTs = srcTs;
-
-		/* Special treatmeant for last descriptor */
-		if (count == 1) {
-			/* Mark the last descriptor */
-			pProg->ctl.lo &=
-			    ~(dmacHw_REG_CTL_LLP_DST_EN |
-			      dmacHw_REG_CTL_LLP_SRC_EN);
-			/* Treatment for odd data bytes */
-			if (oddSize) {
-				/* Adjust for single byte transaction width */
-				switch (pConfig->transferType) {
-				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-					dstTrWidth =
-					    dmacHw_DST_TRANSACTION_WIDTH_8;
-					blkTs =
-					    (oddSize / srcTrSize) +
-					    ((oddSize % srcTrSize) ? 1 : 0);
-					break;
-				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-					srcTrWidth =
-					    dmacHw_SRC_TRANSACTION_WIDTH_8;
-					blkTs = oddSize;
-					break;
-				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
-					srcTrWidth =
-					    dmacHw_SRC_TRANSACTION_WIDTH_8;
-					dstTrWidth =
-					    dmacHw_DST_TRANSACTION_WIDTH_8;
-					blkTs = oddSize;
-					break;
-				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
-					/* Do not adjust the transaction width  */
-					break;
-				}
-			} else {
-				srcTs -= blkTs;
-			}
-		} else {
-			if (srcTs / maxBlockSize) {
-				blkTs = maxBlockSize;
-			}
-			/* Remaining source transactions for next iteration */
-			srcTs -= blkTs;
-		}
-		/* Must have a valid source transactions */
-		dmacHw_ASSERT(blkTs > 0);
-		/* Set control information */
-		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
-			pProg->ctl.lo |= pConfig->transferType |
-			    pConfig->srcUpdate |
-			    pConfig->dstUpdate |
-			    srcTrWidth |
-			    dstTrWidth |
-			    pConfig->srcMaxBurstWidth |
-			    pConfig->dstMaxBurstWidth |
-			    pConfig->srcMasterInterface |
-			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-		} else {
-			uint32_t transferType = 0;
-			switch (pConfig->transferType) {
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
-				break;
-			default:
-				dmacHw_ASSERT(0);
-			}
-			pProg->ctl.lo |= transferType |
-			    pConfig->srcUpdate |
-			    pConfig->dstUpdate |
-			    srcTrWidth |
-			    dstTrWidth |
-			    pConfig->srcMaxBurstWidth |
-			    pConfig->dstMaxBurstWidth |
-			    pConfig->srcMasterInterface |
-			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-		}
-
-		/* Set block transaction size */
-		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
-		/* Look for next descriptor */
-		if (count > 1) {
-			/* Point to the next descriptor */
-			pProg = (dmacHw_DESC_t *) pProg->llp;
-
-			/* Update source and destination address for next iteration */
-			switch (pConfig->transferType) {
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-				if (pConfig->dstScatterWidth) {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->dstScatterWidth) *
-					     pConfig->dstScatterJump);
-				} else {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-				if (pConfig->srcGatherWidth) {
-					pSrcAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->srcGatherWidth) *
-					     pConfig->srcGatherJump);
-				} else {
-					pSrcAddr =
-					    (char *)pSrcAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
-				if (pConfig->dstScatterWidth) {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->dstScatterWidth) *
-					     pConfig->dstScatterJump);
-				} else {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize;
-				}
-
-				if (pConfig->srcGatherWidth) {
-					pSrcAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->srcGatherWidth) *
-					     pConfig->srcGatherJump);
-				} else {
-					pSrcAddr =
-					    (char *)pSrcAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
-				/* Do not adjust the address */
-				break;
-			default:
-				dmacHw_ASSERT(0);
-			}
-		} else {
-			/* At the end of transfer "srcTs" must be zero */
-			dmacHw_ASSERT(srcTs == 0);
-		}
-		count--;
-	}
-
-	/* Remember the descriptor to initialize the registers */
-	if (pRing->pProg == dmacHw_DESC_INIT) {
-		pRing->pProg = pStart;
-	}
-	/* Indicate that the descriptor is updated */
-	pRing->pEnd = pProg;
-	/* Head pointing to the next descriptor */
-	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
-	/* Update Tail pointer if destination is a peripheral,
-	   because no one is going to read from the pTail
-	 */
-	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-		pRing->pTail = pRing->pHead;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Provides DMA controller attributes
-*
-*
-*  @return  DMA controller attributes
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	switch (attr) {
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
-		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
-		return (1 <<
-			 (dmacHw_GET_MAX_BLOCK_SIZE
-			  (pCblk->module, pCblk->module) + 2)) - 8;
-	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
-		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
-		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
-							   pCblk->channel);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
-		return GetFifoSize(handle);
-	}
-	dmacHw_ASSERT(0);
-	return 0;
-}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
deleted file mode 100644
index a1f328357aa4..000000000000
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ /dev/null
@@ -1,1017 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_extra.c
-*
-*  @brief   Extra Low level DMA controller driver routines
-*
-*  @note
-*
-*   These routines provide basic DMA functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-#include <stddef.h>
-
-#include <csp/dmacHw.h>
-#include <mach/csp/dmacHw_reg.h>
-#include <mach/csp/dmacHw_priv.h>
-
-extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
-
-/* ---- External Function Prototypes ------------------------------------- */
-
-/* ---- Internal Use Function Prototypes --------------------------------- */
-/****************************************************************************/
-/**
-*  @brief   Overwrites data length in the descriptor
-*
-*  This function overwrites data length in the descriptor
-*
-*
-*  @return   void
-*
-*  @note
-*          This is only used for PCM channel
-*/
-/****************************************************************************/
-void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			  size_t dataLen	/*   [ IN ] Data length in bytes */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Helper function to display DMA registers
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
-				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
-				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
-    ) {
-	int chan;
-
-	(*fpPrint) ("Displaying register content \n\n");
-	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
-	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
-	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: misc config                         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
-	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
-	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
-	(*fpPrint) ("Module %d: misc test                           0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
-
-	if (channel == -1) {
-		for (chan = 0; chan < 8; chan++) {
-			(*fpPrint)
-			    ("--------------------------------------------------\n");
-			(*fpPrint)
-			    ("Module %d: Channel %d Source                   0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Destination              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d LLP                      0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Control (LO)             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Control (HI)             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Source Stats             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Dest Stats               0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Config (LO)              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Config (HI)              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
-		}
-	} else {
-		chan = channel;
-		(*fpPrint)
-		    ("--------------------------------------------------\n");
-		(*fpPrint)
-		    ("Module %d: Channel %d Source                   0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Destination              0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d LLP                      0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Control (LO)             0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Control (HI)             0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Source Stats             0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Dest Stats               0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Config (LO)              0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Config (HI)              0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Helper function to display descriptor ring
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	dmacHw_DESC_t *pStart;
-
-	if (pRing->pHead == NULL) {
-		return;
-	}
-
-	pStart = pRing->pHead;
-
-	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
-		if (pStart == pRing->pHead) {
-			(*fpPrint) ("Head\n");
-		}
-		if (pStart == pRing->pTail) {
-			(*fpPrint) ("Tail\n");
-		}
-		if (pStart == pRing->pProg) {
-			(*fpPrint) ("Prog\n");
-		}
-		if (pStart == pRing->pEnd) {
-			(*fpPrint) ("End\n");
-		}
-		if (pStart == pRing->pFree) {
-			(*fpPrint) ("Free\n");
-		}
-		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
-		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
-		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
-		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
-		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
-		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
-		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
-		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
-		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
-
-		pStart = (dmacHw_DESC_t *) pStart->llp;
-	}
-	if (pStart == pRing->pHead) {
-		(*fpPrint) ("Head\n");
-	}
-	if (pStart == pRing->pTail) {
-		(*fpPrint) ("Tail\n");
-	}
-	if (pStart == pRing->pProg) {
-		(*fpPrint) ("Prog\n");
-	}
-	if (pStart == pRing->pEnd) {
-		(*fpPrint) ("End\n");
-	}
-	if (pStart == pRing->pFree) {
-		(*fpPrint) ("Free\n");
-	}
-	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
-	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
-	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
-	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
-	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
-	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
-	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
-	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
-	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Check if DMA channel is the flow controller
-*
-*  @return  1 : If DMA is a flow controller
-*           0 : Peripheral is the flow controller
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	uint32_t ttfc =
-	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
-	    lo & dmacHw_REG_CTL_TTFC_MASK;
-
-	switch (ttfc) {
-	case dmacHw_REG_CTL_TTFC_MM_DMAC:
-	case dmacHw_REG_CTL_TTFC_MP_DMAC:
-	case dmacHw_REG_CTL_TTFC_PM_DMAC:
-	case dmacHw_REG_CTL_TTFC_PP_DMAC:
-		return 1;
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Overwrites data length in the descriptor
-*
-*  This function overwrites data length in the descriptor
-*
-*
-*  @return   void
-*
-*  @note
-*          This is only used for PCM channel
-*/
-/****************************************************************************/
-void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			  size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	dmacHw_DESC_t *pProg;
-	dmacHw_DESC_t *pHead;
-	int srcTs = 0;
-	int srcTrSize = 0;
-
-	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
-	pProg = pHead;
-
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-	srcTs = dataLen / srcTrSize;
-	do {
-		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
-		pProg = (dmacHw_DESC_t *) pProg->llp;
-	} while (pProg != pHead);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the DMA channel specific interrupt
-*
-*
-*  @return   void
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Returns the cause of channel specific DMA interrupt
-*
-*  This function returns the cause of interrupt
-*
-*  @return  Interrupt status, each bit representing a specific type of interrupt
-*
-*  @note
-*     Should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
-
-	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_TRANS;
-	}
-	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
-	}
-	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_ERROR;
-	}
-
-	return status;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a DMA channel causing interrupt
-*
-*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-*  @return  NULL   : No channel causing DMA interrupt
-*           ! NULL : Handle to a channel causing DMA interrupt
-*  @note
-*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
-{
-	uint32_t i;
-
-	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
-		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
-		     ((0x00000001 << dmacHw_gCblk[i].channel)))
-		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
-			((0x00000001 << dmacHw_gCblk[i].channel)))
-		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
-			((0x00000001 << dmacHw_gCblk[i].channel)))
-		    ) {
-			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
-		}
-	}
-	return dmacHw_CBLK_TO_HANDLE(NULL);
-}
-
-/****************************************************************************/
-/**
-*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-				    size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	int srcTs = 0;
-	int oddSize = 0;
-	int descCount = 0;
-	int dstTrSize = 0;
-	int srcTrSize = 0;
-	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
-	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
-	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
-
-	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-
-	/* Skip Tx if buffer is NULL  or length is unknown */
-	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
-		/* Do not initiate transfer */
-		return -1;
-	}
-
-	/* Ensure scatter and gather are transaction aligned */
-	if (pConfig->srcGatherWidth % srcTrSize
-	    || pConfig->dstScatterWidth % dstTrSize) {
-		return -1;
-	}
-
-	/*
-	   Background 1: DMAC can not perform DMA if source and destination addresses are
-	   not properly aligned with the channel's transaction width. So, for successful
-	   DMA transfer, transaction width must be set according to the alignment of the
-	   source and destination address.
-	 */
-
-	/* Adjust destination transaction width if destination address is not aligned properly */
-	dstTrWidth = pConfig->dstMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
-		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
-		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
-	}
-
-	/* Adjust source transaction width if source address is not aligned properly */
-	srcTrWidth = pConfig->srcMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
-		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
-		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
-	}
-
-	/* Find the maximum transaction per descriptor */
-	if (pConfig->maxDataPerBlock
-	    && ((pConfig->maxDataPerBlock / srcTrSize) <
-		dmacHw_MAX_BLOCKSIZE)) {
-		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
-	}
-
-	/* Find number of source transactions needed to complete the DMA transfer */
-	srcTs = dataLen / srcTrSize;
-	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
-	if (srcTs && (dstTrSize > srcTrSize)) {
-		oddSize = dataLen % dstTrSize;
-		/* Adjust source transaction count due to "oddSize" */
-		srcTs = srcTs - (oddSize / srcTrSize);
-	} else {
-		oddSize = dataLen % srcTrSize;
-	}
-	/* Adjust "descCount" due to "oddSize" */
-	if (oddSize) {
-		descCount++;
-	}
-
-	/* Find the number of descriptor needed for total "srcTs" */
-	if (srcTs) {
-		descCount += ((srcTs - 1) / maxBlockSize) + 1;
-	}
-
-	return descCount;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Check the existence of pending descriptor
-*
-*  This function confirmes if there is any pending descriptor in the chain
-*  to program the channel
-*
-*  @return  1 : Channel need to be programmed with pending descriptor
-*           0 : No more pending descriptor to programe the channel
-*
-*  @note
-*     - This function should be called from ISR in case there are pending
-*       descriptor to program the channel.
-*
-*     Example:
-*
-*     dmac_isr ()
-*     {
-*         ...
-*         if (dmacHw_descriptorPending (handle))
-*         {
-*            dmacHw_initiateTransfer (handle);
-*         }
-*     }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	/* Make sure channel is not busy */
-	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		/* Check if pEnd is not processed */
-		if (pRing->pEnd) {
-			/* Something left for processing */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to stop transfer
-*
-*  Ensures the channel is not doing any transfer after calling this function
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk;
-
-	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	/* Stop the channel */
-	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Deallocates source or destination memory, allocated
-*
-*  This function can be called to deallocate data memory that was DMAed successfully
-*
-*  @return  On failure : -1
-*           On success : Number of buffer freed
-*
-*  @note
-*     This function will be called ONLY, when source OR destination address is pointing
-*     to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	uint32_t count = 0;
-
-	if (fpFree == NULL) {
-		return -1;
-	}
-
-	while ((pRing->pFree != pRing->pTail)
-	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
-		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
-			/* Identify, which memory to free */
-			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-				(*fpFree) ((void *)pRing->pFree->dar);
-			} else {
-				/* Destination was a peripheral */
-				(*fpFree) ((void *)pRing->pFree->sar);
-			}
-			/* Unmark user memory to indicate it is freed */
-			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
-		}
-		dmacHw_NEXT_DESC(pRing, pFree);
-
-		count++;
-	}
-
-	return count;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
-*
-*  This function will update the discriptor ring by allocating buffers, when source peripheral
-*  has to work as a flow controller to transfer data from:
-*           - Peripheral to memory.
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor updated
-*
-*
-*  @note
-*     Channel must be configured for peripheral to memory transfer
-*
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
-				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
-				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
-				     int num	/*   [ IN ] Number of descriptor to set */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_DESC_t *pProg = NULL;
-	dmacHw_DESC_t *pLast = NULL;
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	uint32_t dstAddr;
-	uint32_t controlParam;
-	int i;
-
-	dmacHw_ASSERT(pConfig->transferType ==
-		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
-
-	if (num > pRing->num) {
-		return -1;
-	}
-
-	pLast = pRing->pEnd;	/* Last descriptor updated */
-	pProg = pRing->pHead;	/* First descriptor in the new list */
-
-	controlParam = pConfig->srcUpdate |
-	    pConfig->dstUpdate |
-	    pConfig->srcMaxTransactionWidth |
-	    pConfig->dstMaxTransactionWidth |
-	    pConfig->srcMasterInterface |
-	    pConfig->dstMasterInterface |
-	    pConfig->srcMaxBurstWidth |
-	    pConfig->dstMaxBurstWidth |
-	    dmacHw_REG_CTL_TTFC_PM_PERI |
-	    dmacHw_REG_CTL_LLP_DST_EN |
-	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
-
-	for (i = 0; i < num; i++) {
-		/* Allocate Rx buffer only for idle descriptor */
-		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
-		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
-		    ) {
-			/* Rx descriptor is not idle */
-			break;
-		}
-		/* Set source address */
-		pRing->pHead->sar = srcAddr;
-		if (fpAlloc) {
-			/* Allocate memory for buffer in descriptor */
-			dstAddr = (uint32_t) (*fpAlloc) (len);
-			/* Check the destination address */
-			if (dstAddr == 0) {
-				if (i == 0) {
-					/* Not a single descriptor is available */
-					return -1;
-				}
-				break;
-			}
-			/* Set destination address */
-			pRing->pHead->dar = dstAddr;
-		}
-		/* Set control information */
-		pRing->pHead->ctl.lo = controlParam;
-		/* Use "devCtl" to mark the memory that need to be freed later */
-		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
-		/* Descriptor is now owned by the channel */
-		pRing->pHead->ctl.hi = 0;
-		/* Remember the descriptor last updated */
-		pRing->pEnd = pRing->pHead;
-		/* Update next descriptor */
-		dmacHw_NEXT_DESC(pRing, pHead);
-	}
-
-	/* Mark the end of the list */
-	pRing->pEnd->ctl.lo &=
-	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
-	/* Connect the list */
-	if (pLast != pProg) {
-		pLast->ctl.lo |=
-		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
-	}
-	/* Mark the descriptors are updated */
-	pCblk->descUpdated = 1;
-	if (!pCblk->varDataStarted) {
-		/* LLP must be pointing to the first descriptor */
-		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
-			       (uint32_t) pProg - pRing->virt2PhyOffset);
-		/* Channel, handling variable data started */
-		pCblk->varDataStarted = 1;
-	}
-
-	return i;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Read data DMAed to memory
-*
-*  This function will read data that has been DMAed to memory while transferring from:
-*          - Memory to memory
-*          - Peripheral to memory
-*
-*  @param    handle     -
-*  @param    ppBbuf     -
-*  @param    pLen       -
-*
-*  @return  0 - No more data is available to read
-*           1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
-			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			       void **ppBbuf,	/*   [ OUT ] Data received */
-			       size_t *pLlen	/*   [ OUT ] Length of the data received */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	(void)handle;
-
-	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
-		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
-		    (pRing->pTail == pRing->pHead)
-		    ) {
-			/* No receive data available */
-			*ppBbuf = (char *)NULL;
-			*pLlen = 0;
-
-			return 0;
-		}
-	}
-
-	/* Return read buffer and length */
-	*ppBbuf = (char *)pRing->pTail->dar;
-
-	/* Extract length of the received data */
-	if (DmaIsFlowController(pDescriptor)) {
-		uint32_t srcTrSize = 0;
-
-		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
-			srcTrSize = 1;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
-			srcTrSize = 2;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
-			srcTrSize = 4;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
-			srcTrSize = 8;
-			break;
-		default:
-			dmacHw_ASSERT(0);
-		}
-		/* Calculate length from the block size */
-		*pLlen =
-		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
-		    srcTrSize;
-	} else {
-		/* Extract length from the source peripheral */
-		*pLlen = pRing->pTail->sstat;
-	}
-
-	/* Advance tail to next descriptor */
-	dmacHw_NEXT_DESC(pRing, pTail);
-
-	return 1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptor carrying control information
-*
-*  This function will be used to send specific control information to the device
-*  using the DMA channel
-*
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
-				uint32_t control	/*   [ IN ] Device control information */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	if (ctlAddress == 0) {
-		return -1;
-	}
-
-	/* Check the availability of descriptors in the ring */
-	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
-		return -1;
-	}
-	/* Set control information */
-	pRing->pHead->devCtl = control;
-	/* Set source and destination address */
-	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
-	pRing->pHead->dar = ctlAddress;
-	/* Set control parameters */
-	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
-		pRing->pHead->ctl.lo = pConfig->transferType |
-		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
-		    pConfig->dstMaxTransactionWidth |
-		    dmacHw_SRC_BURST_WIDTH_0 |
-		    dmacHw_DST_BURST_WIDTH_0 |
-		    pConfig->srcMasterInterface |
-		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-	} else {
-		uint32_t transferType = 0;
-		switch (pConfig->transferType) {
-		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
-			break;
-		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
-			break;
-		default:
-			dmacHw_ASSERT(0);
-		}
-		pRing->pHead->ctl.lo = transferType |
-		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
-		    pConfig->dstMaxTransactionWidth |
-		    dmacHw_SRC_BURST_WIDTH_0 |
-		    dmacHw_DST_BURST_WIDTH_0 |
-		    pConfig->srcMasterInterface |
-		    pConfig->dstMasterInterface |
-		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
-	}
-
-	/* Set block transaction size to one 32 bit transaction */
-	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
-
-	/* Remember the descriptor to initialize the registers */
-	if (pRing->pProg == dmacHw_DESC_INIT) {
-		pRing->pProg = pRing->pHead;
-	}
-	pRing->pEnd = pRing->pHead;
-
-	/* Advance the descriptor */
-	dmacHw_NEXT_DESC(pRing, pHead);
-
-	/* Update Tail pointer if destination is a peripheral */
-	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-		pRing->pTail = pRing->pHead;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Sets channel specific user data
-*
-*  This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			       void *userData	/*  [ IN ] User data */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	pCblk->userData = userData;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets channel specific user data
-*
-*  This function returns user data specific to a DMA channel
-*
-*  @return   user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	return pCblk->userData;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Resets descriptor control information
-*
-*  @return  void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    ) {
-	int i;
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pDesc;
-
-	pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	pDesc = pRing->pHead;
-
-	for (i = 0; i < pRing->num; i++) {
-		/* Mark descriptor is ready to use */
-		pDesc->ctl.hi = dmacHw_DESC_FREE;
-		/* Look into next link list item */
-		pDesc++;
-	}
-	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
-	pRing->pProg = dmacHw_DESC_INIT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Displays channel specific registers and other control parameters
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
-	DisplayDescRing(pDescriptor, fpPrint);
-}
diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
deleted file mode 100644
index 244a61ab7697..000000000000
--- a/arch/arm/mach-bcmring/csp/tmr/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
deleted file mode 100644
index 16225e43f3c3..000000000000
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ /dev/null
@@ -1,576 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw.c
-*
-*  @brief   Low level Timer driver routines
-*
-*  @note
-*
-*   These routines provide basic timer functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-
-#include <csp/tmrHw.h>
-#include <mach/csp/tmrHw_reg.h>
-
-#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
-#define tmrHw_MILLISEC_PER_SEC              (1000)
-
-#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
-#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
-#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
-#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
-#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
-#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
-
-#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
-#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
-#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
-#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
-#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
-#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
-
-static void ResetTimer(tmrHw_ID_t timerId)
-    __attribute__ ((section(".aramtext")));
-static int tmrHw_divide(int num, int denom)
-    __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Get timer capability
-*
-*  This function returns various capabilities/attributes of a timer
-*
-*  @return  Capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
-) {
-	switch (capability) {
-	case tmrHw_CAPABILITY_CLOCK:
-		return (timerId <=
-			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
-		    tmrHw_HIGH_RESOLUTION_CLOCK;
-	case tmrHw_CAPABILITY_RESOLUTION:
-		return 32;
-	default:
-		return 0;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Resets a timer
-*
-*  This function initializes  timer
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
-) {
-	/* Reset timer */
-	pTmrHw[timerId].LoadValue = 0;
-	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
-	pTmrHw[timerId].Control = 0;
-	pTmrHw[timerId].BackgroundLoad = 0;
-	/* Always configure as a 32 bit timer */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
-	/* Clear interrupt only if raw status interrupt is set */
-	if (pTmrHw[timerId].RawInterruptStatus) {
-		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Sets counter value for an interval in ms
-*
-*  @return   On success: Effective counter value set
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	uint32_t scale = 0;
-	uint32_t count = 0;
-
-	if (timerId == 0 || timerId == 1) {
-		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
-		} else {
-			return 0;
-		}
-
-		count = msec * scale;
-		/* Set counter value */
-		pTmrHw[timerId].LoadValue = count;
-		pTmrHw[timerId].BackgroundLoad = count;
-
-	} else if (timerId == 2 || timerId == 3) {
-		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
-		} else {
-			return 0;
-		}
-
-		count = msec * scale;
-		/* Set counter value */
-		pTmrHw[timerId].LoadValue = count;
-		pTmrHw[timerId].BackgroundLoad = count;
-	}
-	return count / scale;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer in terms of timer interrupt rate
-*
-*  This function initializes a periodic timer to generate specific number of
-*  timer interrupt per second
-*
-*  @return   On success: Effective timer frequency
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
-) {
-	uint32_t resolution = 0;
-	uint32_t count = 0;
-	ResetTimer(timerId);
-
-	/* Set timer mode periodic */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-	/* Set timer in highest resolution */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-
-	if (rate && (timerId == 0 || timerId == 1)) {
-		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
-			return 0;
-		}
-		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
-	} else if (rate && (timerId == 2 || timerId == 3)) {
-		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
-			return 0;
-		} else {
-			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
-		}
-	} else {
-		return 0;
-	}
-	/* Find the counter value */
-	count = resolution / rate;
-	/* Set counter value */
-	pTmrHw[timerId].LoadValue = count;
-	pTmrHw[timerId].BackgroundLoad = count;
-
-	return resolution / count;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt after
-*           certain time interval
-*
-*  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in millisecond
-*
-*  @return   On success: Effective interval set in milli-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	ResetTimer(timerId);
-
-	/* Set timer mode periodic */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-
-	return SetTimerPeriod(timerId, msec);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt just once
-*           after certain time interval
-*
-*  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in millisecond
-*
-*  @return   On success: Effective interval set in milli-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	ResetTimer(timerId);
-
-	/* Set timer mode oneshot */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
-
-	return SetTimerPeriod(timerId, msec);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a timer to run as a free running timer
-*
-*  This function initializes a timer to run as a free running timer
-*
-*  @return   Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
-) {
-	uint32_t scale = 0;
-
-	ResetTimer(timerId);
-	/* Set timer as free running mode */
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-
-	if (divider >= 64) {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-		scale = 256;
-	} else if (divider >= 8) {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-		scale = 16;
-	} else {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-		scale = 1;
-	}
-
-	if (timerId == 0 || timerId == 1) {
-		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
-	} else if (timerId == 2 || timerId == 3) {
-		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Starts a timer
-*
-*  This function starts a preconfigured timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Stops a timer
-*
-*  This function stops a running timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets current timer count
-*
-*  This function returns the current timer value
-*
-*  @return  Current downcounting timer value
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	/* return 32 bit timer value */
-	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
-	case tmrHw_CONTROL_FREE_RUNNING:
-		if (pTmrHw[timerId].CurrentValue) {
-			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
-		}
-		break;
-	case tmrHw_CONTROL_PERIODIC:
-	case tmrHw_CONTROL_ONESHOT:
-		return pTmrHw[timerId].BackgroundLoad -
-		    pTmrHw[timerId].CurrentValue;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets timer count rate
-*
-*  This function returns the number of counts per second
-*
-*  @return  Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	uint32_t divider = 0;
-
-	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
-	case tmrHw_CONTROL_PRESCALE_1:
-		divider = 1;
-		break;
-	case tmrHw_CONTROL_PRESCALE_16:
-		divider = 16;
-		break;
-	case tmrHw_CONTROL_PRESCALE_256:
-		divider = 256;
-		break;
-	default:
-		tmrHw_ASSERT(0);
-	}
-
-	if (timerId == 0 || timerId == 1) {
-		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
-	} else {
-		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables timer interrupt
-*
-*  This function enables the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables timer interrupt
-*
-*  This function disable the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the timer interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].InterruptClear = 0x1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets the interrupt status
-*
-*  This function returns timer interrupt status
-*
-*  @return   Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	if (pTmrHw[timerId].InterruptStatus) {
-		return tmrHw_INTERRUPT_STATUS_SET;
-	} else {
-		return tmrHw_INTERRUPT_STATUS_UNSET;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a timer causing interrupt
-*
-*  This functions returns a timer causing interrupt
-*
-*  @return  0xFFFFFFFF   : No timer causing an interrupt
-*           ! 0xFFFFFFFF : timer causing an interrupt
-*  @note
-*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
-) {
-	int i;
-
-	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
-		if (pTmrHw[i].InterruptStatus) {
-			return i;
-		}
-	}
-
-	return 0xFFFFFFFF;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Displays specific timer registers
-*
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-) {
-	(*fpPrint) ("Displaying register contents \n\n");
-	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
-		    pTmrHw[timerId].LoadValue);
-	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
-		    pTmrHw[timerId].BackgroundLoad);
-	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
-		    pTmrHw[timerId].Control);
-	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
-		    pTmrHw[timerId].InterruptClear);
-	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
-		    pTmrHw[timerId].RawInterruptStatus);
-	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
-		    pTmrHw[timerId].InterruptStatus);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-		  unsigned long usecs /*  [ IN ] usec to delay */
-) {
-	tmrHw_RATE_t usec_tick_rate;
-	tmrHw_COUNT_t start_time;
-	tmrHw_COUNT_t delta_time;
-
-	start_time = tmrHw_GetCurrentCount(timerId);
-	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
-	delta_time = usecs * usec_tick_rate;
-
-	/* Busy wait */
-	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
-		;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Local Divide function
-*
-*  This function does the divide
-*
-*  @return divide value
-*
-*/
-/****************************************************************************/
-static int tmrHw_divide(int num, int denom)
-{
-	int r;
-	int t = 1;
-
-	/* Shift denom and t up to the largest value to optimize algorithm */
-	/* t contains the units of each divide */
-	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
-		denom = denom << 1;
-		t = t << 1;
-	}
-
-	/* Initialize the result */
-	r = 0;
-
-	do {
-		/* Determine if there exists a positive remainder */
-		if ((num - denom) >= 0) {
-			/* Accumlate t to the result and calculate a new remainder */
-			num = num - denom;
-			r = r + t;
-		}
-		/* Continue to shift denom and shift t down to 0 */
-		denom = denom >> 1;
-		t = t >> 1;
-	} while (t != 0);
-	return r;
-}
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
deleted file mode 100644
index e5fd241fccdc..000000000000
--- a/arch/arm/mach-bcmring/dma.c
+++ /dev/null
@@ -1,1518 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma.c
-*
-*   @brief  Implements the DMA interface.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/irqreturn.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-
-#include <mach/timer.h>
-
-#include <linux/pfn.h>
-#include <linux/atomic.h>
-#include <mach/dma.h>
-
-/* ---- Public Variables ------------------------------------------------- */
-
-/* ---- Private Constants and Types -------------------------------------- */
-
-#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
-
-#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
-#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
-
-
-/* ---- Private Variables ------------------------------------------------ */
-
-static DMA_Global_t gDMA;
-static struct proc_dir_entry *gDmaDir;
-
-#include "dma_device.c"
-
-/* ---- Private Function Prototypes -------------------------------------- */
-
-/* ---- Functions  ------------------------------------------------------- */
-
-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/channels
-*/
-/****************************************************************************/
-
-static int dma_proc_read_channels(char *buf, char **start, off_t offset,
-				  int count, int *eof, void *data)
-{
-	int controllerIdx;
-	int channelIdx;
-	int limit = count - 200;
-	int len = 0;
-	DMA_Channel_t *channel;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			if (len >= limit) {
-				break;
-			}
-
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			len +=
-			    sprintf(buf + len, "%d:%d ", controllerIdx,
-				    channelIdx);
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
-			    0) {
-				len +=
-				    sprintf(buf + len, "Dedicated for %s ",
-					    DMA_gDeviceAttribute[channel->
-								 devType].name);
-			} else {
-				len += sprintf(buf + len, "Shared ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
-				len += sprintf(buf + len, "No ISR ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
-				len += sprintf(buf + len, "Fifo: 128 ");
-			} else {
-				len += sprintf(buf + len, "Fifo: 64  ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
-				len +=
-				    sprintf(buf + len, "InUse by %s",
-					    DMA_gDeviceAttribute[channel->
-								 devType].name);
-#if (DMA_DEBUG_TRACK_RESERVATION)
-				len +=
-				    sprintf(buf + len, " (%s:%d)",
-					    channel->fileName,
-					    channel->lineNum);
-#endif
-			} else {
-				len += sprintf(buf + len, "Avail ");
-			}
-
-			if (channel->lastDevType != DMA_DEVICE_NONE) {
-				len +=
-				    sprintf(buf + len, "Last use: %s ",
-					    DMA_gDeviceAttribute[channel->
-								 lastDevType].
-					    name);
-			}
-
-			len += sprintf(buf + len, "\n");
-		}
-	}
-	up(&gDMA.lock);
-	*eof = 1;
-
-	return len;
-}
-
-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/devices
-*/
-/****************************************************************************/
-
-static int dma_proc_read_devices(char *buf, char **start, off_t offset,
-				 int count, int *eof, void *data)
-{
-	int limit = count - 200;
-	int len = 0;
-	int devIdx;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
-		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
-
-		if (devAttr->name == NULL) {
-			continue;
-		}
-
-		if (len >= limit) {
-			break;
-		}
-
-		len += sprintf(buf + len, "%-12s ", devAttr->name);
-
-		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-			len +=
-			    sprintf(buf + len, "Dedicated %d:%d ",
-				    devAttr->dedicatedController,
-				    devAttr->dedicatedChannel);
-		} else {
-			len += sprintf(buf + len, "Shared DMA:");
-			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
-				len += sprintf(buf + len, "0");
-			}
-			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
-				len += sprintf(buf + len, "1");
-			}
-			len += sprintf(buf + len, " ");
-		}
-		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
-			len += sprintf(buf + len, "NoISR ");
-		}
-		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
-			len += sprintf(buf + len, "Allow-128 ");
-		}
-
-		len +=
-		    sprintf(buf + len,
-			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
-			    devAttr->numTransfers, devAttr->transferTicks,
-			    devAttr->transferBytes,
-			    devAttr->ring.bytesAllocated);
-
-	}
-
-	up(&gDMA.lock);
-	*eof = 1;
-
-	return len;
-}
-
-/****************************************************************************/
-/**
-*   Determines if a DMA_Device_t is "valid".
-*
-*   @return
-*       TRUE        - dma device is valid
-*       FALSE       - dma device isn't valid
-*/
-/****************************************************************************/
-
-static inline int IsDeviceValid(DMA_Device_t device)
-{
-	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
-}
-
-/****************************************************************************/
-/**
-*   Translates a DMA handle into a pointer to a channel.
-*
-*   @return
-*       non-NULL    - pointer to DMA_Channel_t
-*       NULL        - DMA Handle was invalid
-*/
-/****************************************************************************/
-
-static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
-{
-	int controllerIdx;
-	int channelIdx;
-
-	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
-	channelIdx = CHANNEL_FROM_HANDLE(handle);
-
-	if ((controllerIdx > DMA_NUM_CONTROLLERS)
-	    || (channelIdx > DMA_NUM_CHANNELS)) {
-		return NULL;
-	}
-	return &gDMA.controller[controllerIdx].channel[channelIdx];
-}
-
-/****************************************************************************/
-/**
-*   Interrupt handler which is called to process DMA interrupts.
-*/
-/****************************************************************************/
-
-static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int irqStatus;
-
-	channel = (DMA_Channel_t *) dev_id;
-
-	/* Figure out why we were called, and knock down the interrupt */
-
-	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
-	dmacHw_clearInterrupt(channel->dmacHwHandle);
-
-	if ((channel->devType < 0)
-	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
-		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
-		       channel->devType);
-		return IRQ_NONE;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	/* Update stats */
-
-	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
-		devAttr->transferTicks +=
-		    (timer_get_tick_count() - devAttr->transferStartTime);
-	}
-
-	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
-		printk(KERN_ERR
-		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
-		       channel->devType, devAttr->name);
-	} else {
-		devAttr->numTransfers++;
-		devAttr->transferBytes += devAttr->numBytes;
-	}
-
-	/* Call any installed handler */
-
-	if (devAttr->devHandler != NULL) {
-		devAttr->devHandler(channel->devType, irqStatus,
-				    devAttr->userData);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/****************************************************************************/
-/**
-*   Allocates memory to hold a descriptor ring. The descriptor ring then
-*   needs to be populated by making one or more calls to
-*   dna_add_descriptors.
-*
-*   The returned descriptor ring will be automatically initialized.
-*
-*   @return
-*       0           Descriptor ring was allocated successfully
-*       -EINVAL     Invalid parameters passed in
-*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
-			      int numDescriptors	/* Number of descriptors that need to be allocated. */
-    ) {
-	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
-
-	if ((ring == NULL) || (numDescriptors <= 0)) {
-		return -EINVAL;
-	}
-
-	ring->physAddr = 0;
-	ring->descriptorsAllocated = 0;
-	ring->bytesAllocated = 0;
-
-	ring->virtAddr = dma_alloc_writecombine(NULL,
-						     bytesToAlloc,
-						     &ring->physAddr,
-						     GFP_KERNEL);
-	if (ring->virtAddr == NULL) {
-		return -ENOMEM;
-	}
-
-	ring->bytesAllocated = bytesToAlloc;
-	ring->descriptorsAllocated = numDescriptors;
-
-	return dma_init_descriptor_ring(ring, numDescriptors);
-}
-
-EXPORT_SYMBOL(dma_alloc_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Releases the memory which was previously allocated for a descriptor ring.
-*/
-/****************************************************************************/
-
-void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
-    ) {
-	if (ring->virtAddr != NULL) {
-		dma_free_writecombine(NULL,
-				      ring->bytesAllocated,
-				      ring->virtAddr, ring->physAddr);
-	}
-
-	ring->bytesAllocated = 0;
-	ring->descriptorsAllocated = 0;
-	ring->virtAddr = NULL;
-	ring->physAddr = 0;
-}
-
-EXPORT_SYMBOL(dma_free_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Initializes a descriptor ring, so that descriptors can be added to it.
-*   Once a descriptor ring has been allocated, it may be reinitialized for
-*   use with additional/different regions of memory.
-*
-*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
-*   initialize the ring with a smaller number of descriptors. The amount
-*   of memory allocated for the descriptor ring will not be reduced, and
-*   the descriptor ring may be reinitialized later
-*
-*   @return
-*       0           Descriptor ring was initialized successfully
-*       -ENOMEM     The descriptor which was passed in has insufficient space
-*                   to hold the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
-			     int numDescriptors	/* Number of descriptors to initialize. */
-    ) {
-	if (ring->virtAddr == NULL) {
-		return -EINVAL;
-	}
-	if (dmacHw_initDescriptor(ring->virtAddr,
-				  ring->physAddr,
-				  ring->bytesAllocated, numDescriptors) < 0) {
-		printk(KERN_ERR
-		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_init_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Determines the number of descriptors which would be required for a
-*   transfer of the indicated memory region.
-*
-*   This function also needs to know which DMA device this transfer will
-*   be destined for, so that the appropriate DMA configuration can be retrieved.
-*   DMA parameters such as transfer width, and whether this is a memory-to-memory
-*   or memory-to-peripheral, etc can all affect the actual number of descriptors
-*   required.
-*
-*   @return
-*       > 0     Returns the number of descriptors required for the indicated transfer
-*       -ENODEV - Device handed in is invalid.
-*       -EINVAL Invalid parameters
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
-				   dma_addr_t srcData,	/* Place to get data to write to device */
-				   dma_addr_t dstData,	/* Pointer to device data address */
-				   size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	int numDescriptors;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
-							      (void *)srcData,
-							      (void *)dstData,
-							      numBytes);
-	if (numDescriptors < 0) {
-		printk(KERN_ERR
-		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
-		return -EINVAL;
-	}
-
-	return numDescriptors;
-}
-
-EXPORT_SYMBOL(dma_calculate_descriptor_count);
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to the descriptor ring. Note that it may take
-*   multiple descriptors for each region of memory. It is the callers
-*   responsibility to allocate a sufficiently large descriptor ring.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*       -EINVAL Invalid parameters
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
-			DMA_Device_t device,	/* DMA Device that descriptors are for */
-			dma_addr_t srcData,	/* Place to get data (memory or device) */
-			dma_addr_t dstData,	/* Place to put data (memory or device) */
-			size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	int rc;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	rc = dmacHw_setDataDescriptor(&devAttr->config,
-				      ring->virtAddr,
-				      (void *)srcData,
-				      (void *)dstData, numBytes);
-	if (rc < 0) {
-		printk(KERN_ERR
-		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
-		       rc);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_add_descriptors);
-
-/****************************************************************************/
-/**
-*   Sets the descriptor ring associated with a device.
-*
-*   Once set, the descriptor ring will be associated with the device, even
-*   across channel request/free calls. Passing in a NULL descriptor ring
-*   will release any descriptor ring currently associated with the device.
-*
-*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
-*         the descriptor ring may be released and reallocated.
-*
-*   Note: This function will release the descriptor memory for any current
-*         descriptor ring associated with this device.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	/* Free the previously allocated descriptor ring */
-
-	dma_free_descriptor_ring(&devAttr->ring);
-
-	if (ring != NULL) {
-		/* Copy in the new one */
-
-		devAttr->ring = *ring;
-	}
-
-	/* Set things up so that if dma_transfer is called then this descriptor */
-	/* ring will get freed. */
-
-	devAttr->prevSrcData = 0;
-	devAttr->prevDstData = 0;
-	devAttr->prevNumBytes = 0;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_set_device_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Retrieves the descriptor ring associated with a device.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	memset(ring, 0, sizeof(*ring));
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	*ring = devAttr->ring;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_get_device_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Configures a DMA channel.
-*
-*   @return
-*       >= 0    - Initialization was successful.
-*
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-static int ConfigChannel(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int controllerIdx;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
-
-	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
-		if (devAttr->config.transferType ==
-		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
-			devAttr->config.dstPeripheralPort =
-			    devAttr->dmacPort[controllerIdx];
-		} else if (devAttr->config.transferType ==
-			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
-			devAttr->config.srcPeripheralPort =
-			    devAttr->dmacPort[controllerIdx];
-		}
-	}
-
-	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
-		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*   Initializes all of the data structures associated with the DMA.
-*   @return
-*       >= 0    - Initialization was successful.
-*
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_init(void)
-{
-	int rc = 0;
-	int controllerIdx;
-	int channelIdx;
-	DMA_Device_t devIdx;
-	DMA_Channel_t *channel;
-	DMA_Handle_t dedicatedHandle;
-
-	memset(&gDMA, 0, sizeof(gDMA));
-
-	sema_init(&gDMA.lock, 0);
-	init_waitqueue_head(&gDMA.freeChannelQ);
-
-	/* Initialize the Hardware */
-
-	dmacHw_initDma();
-
-	/* Start off by marking all of the DMA channels as shared. */
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			channel->flags = 0;
-			channel->devType = DMA_DEVICE_NONE;
-			channel->lastDevType = DMA_DEVICE_NONE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-			channel->fileName = "";
-			channel->lineNum = 0;
-#endif
-
-			channel->dmacHwHandle =
-			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
-						    (controllerIdx,
-						     channelIdx));
-			dmacHw_initChannel(channel->dmacHwHandle);
-		}
-	}
-
-	/* Record any special attributes that channels may have */
-
-	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-
-	/* Now walk through and record the dedicated channels. */
-
-	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
-		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
-
-		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
-		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
-			printk(KERN_ERR
-			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
-			       devAttr->name);
-			rc = -EINVAL;
-			goto out;
-		}
-
-		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-			/* This is a dedicated device. Mark the channel as being reserved. */
-
-			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
-				printk(KERN_ERR
-				       "DMA Device: %s DMA Controller %d is out of range\n",
-				       devAttr->name,
-				       devAttr->dedicatedController);
-				rc = -EINVAL;
-				goto out;
-			}
-
-			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
-				printk(KERN_ERR
-				       "DMA Device: %s DMA Channel %d is out of range\n",
-				       devAttr->name,
-				       devAttr->dedicatedChannel);
-				rc = -EINVAL;
-				goto out;
-			}
-
-			dedicatedHandle =
-			    MAKE_HANDLE(devAttr->dedicatedController,
-					devAttr->dedicatedChannel);
-			channel = HandleToChannel(dedicatedHandle);
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
-			    0) {
-				printk
-				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
-				     devAttr->name,
-				     devAttr->dedicatedController,
-				     devAttr->dedicatedChannel,
-				     DMA_gDeviceAttribute[channel->devType].
-				     name);
-				rc = -EBUSY;
-				goto out;
-			}
-
-			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
-			channel->devType = devIdx;
-
-			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
-				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
-			}
-
-			/* For dedicated channels, we can go ahead and configure the DMA channel now */
-			/* as well. */
-
-			ConfigChannel(dedicatedHandle);
-		}
-	}
-
-	/* Go through and register the interrupt handlers */
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
-				snprintf(channel->name, sizeof(channel->name),
-					 "dma %d:%d %s", controllerIdx,
-					 channelIdx,
-					 channel->devType ==
-					 DMA_DEVICE_NONE ? "" :
-					 DMA_gDeviceAttribute[channel->devType].
-					 name);
-
-				rc =
-				     request_irq(IRQ_DMA0C0 +
-						 (controllerIdx *
-						  DMA_NUM_CHANNELS) +
-						 channelIdx,
-						 dma_interrupt_handler,
-						 IRQF_DISABLED, channel->name,
-						 channel);
-				if (rc != 0) {
-					printk(KERN_ERR
-					       "request_irq for IRQ_DMA%dC%d failed\n",
-					       controllerIdx, channelIdx);
-				}
-			}
-		}
-	}
-
-	/* Create /proc/dma/channels and /proc/dma/devices */
-
-	gDmaDir = proc_mkdir("dma", NULL);
-
-	if (gDmaDir == NULL) {
-		printk(KERN_ERR "Unable to create /proc/dma\n");
-	} else {
-		create_proc_read_entry("channels", 0, gDmaDir,
-				       dma_proc_read_channels, NULL);
-		create_proc_read_entry("devices", 0, gDmaDir,
-				       dma_proc_read_devices, NULL);
-	}
-
-out:
-
-	up(&gDMA.lock);
-
-	return rc;
-}
-
-/****************************************************************************/
-/**
-*   Reserves a channel for use with @a dev. If the device is setup to use
-*   a shared channel, then this function will block until a free channel
-*   becomes available.
-*
-*   @return
-*       >= 0    - A valid DMA Handle.
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-DMA_Handle_t dma_request_channel_dbg
-    (DMA_Device_t dev, const char *fileName, int lineNum)
-#else
-DMA_Handle_t dma_request_channel(DMA_Device_t dev)
-#endif
-{
-	DMA_Handle_t handle;
-	DMA_DeviceAttribute_t *devAttr;
-	DMA_Channel_t *channel;
-	int controllerIdx;
-	int controllerIdx2;
-	int channelIdx;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
-		handle = -ENODEV;
-		goto out;
-	}
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-	{
-		char *s;
-
-		s = strrchr(fileName, '/');
-		if (s != NULL) {
-			fileName = s + 1;
-		}
-	}
-#endif
-	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
-		/* This device has already been requested and not been freed */
-
-		printk(KERN_ERR "%s: device %s is already requested\n",
-		       __func__, devAttr->name);
-		handle = -EBUSY;
-		goto out;
-	}
-
-	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-		/* This device has a dedicated channel. */
-
-		channel =
-		    &gDMA.controller[devAttr->dedicatedController].
-		    channel[devAttr->dedicatedChannel];
-		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
-			handle = -EBUSY;
-			goto out;
-		}
-
-		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
-		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-		channel->fileName = fileName;
-		channel->lineNum = lineNum;
-#endif
-		handle =
-		    MAKE_HANDLE(devAttr->dedicatedController,
-				devAttr->dedicatedChannel);
-		goto out;
-	}
-
-	/* This device needs to use one of the shared channels. */
-
-	handle = DMA_INVALID_HANDLE;
-	while (handle == DMA_INVALID_HANDLE) {
-		/* Scan through the shared channels and see if one is available */
-
-		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
-		     controllerIdx2++) {
-			/* Check to see if we should try on controller 1 first. */
-
-			controllerIdx = controllerIdx2;
-			if ((devAttr->
-			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
-				controllerIdx = 1 - controllerIdx;
-			}
-
-			/* See if the device is available on the controller being tested */
-
-			if ((devAttr->
-			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
-			    != 0) {
-				for (channelIdx = 0;
-				     channelIdx < DMA_NUM_CHANNELS;
-				     channelIdx++) {
-					channel =
-					    &gDMA.controller[controllerIdx].
-					    channel[channelIdx];
-
-					if (((channel->
-					      flags &
-					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
-					     0)
-					    &&
-					    ((channel->
-					      flags & DMA_CHANNEL_FLAG_IN_USE)
-					     == 0)) {
-						if (((channel->
-						      flags &
-						      DMA_CHANNEL_FLAG_LARGE_FIFO)
-						     != 0)
-						    &&
-						    ((devAttr->
-						      flags &
-						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
-						     == 0)) {
-							/* This channel is a large fifo - don't tie it up */
-							/* with devices that we don't want using it. */
-
-							continue;
-						}
-
-						channel->flags |=
-						    DMA_CHANNEL_FLAG_IN_USE;
-						channel->devType = dev;
-						devAttr->flags |=
-						    DMA_DEVICE_FLAG_IN_USE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-						channel->fileName = fileName;
-						channel->lineNum = lineNum;
-#endif
-						handle =
-						    MAKE_HANDLE(controllerIdx,
-								channelIdx);
-
-						/* Now that we've reserved the channel - we can go ahead and configure it */
-
-						if (ConfigChannel(handle) != 0) {
-							handle = -EIO;
-							printk(KERN_ERR
-							       "dma_request_channel: ConfigChannel failed\n");
-						}
-						goto out;
-					}
-				}
-			}
-		}
-
-		/* No channels are currently available. Let's wait for one to free up. */
-
-		{
-			DEFINE_WAIT(wait);
-
-			prepare_to_wait(&gDMA.freeChannelQ, &wait,
-					TASK_INTERRUPTIBLE);
-			up(&gDMA.lock);
-			schedule();
-			finish_wait(&gDMA.freeChannelQ, &wait);
-
-			if (signal_pending(current)) {
-				/* We don't currently hold gDMA.lock, so we return directly */
-
-				return -ERESTARTSYS;
-			}
-		}
-
-		if (down_interruptible(&gDMA.lock)) {
-			return -ERESTARTSYS;
-		}
-	}
-
-out:
-	up(&gDMA.lock);
-
-	return handle;
-}
-
-/* Create both _dbg and non _dbg functions for modules. */
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-#undef dma_request_channel
-DMA_Handle_t dma_request_channel(DMA_Device_t dev)
-{
-	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
-}
-
-EXPORT_SYMBOL(dma_request_channel_dbg);
-#endif
-EXPORT_SYMBOL(dma_request_channel);
-
-/****************************************************************************/
-/**
-*   Frees a previously allocated DMA Handle.
-*/
-/****************************************************************************/
-
-int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
-    ) {
-	int rc = 0;
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
-		channel->lastDevType = channel->devType;
-		channel->devType = DMA_DEVICE_NONE;
-	}
-	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
-	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
-
-out:
-	up(&gDMA.lock);
-
-	wake_up_interruptible(&gDMA.freeChannelQ);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_free_channel);
-
-/****************************************************************************/
-/**
-*   Determines if a given device has been configured as using a shared
-*   channel.
-*
-*   @return
-*       0           Device uses a dedicated channel
-*       > zero      Device uses a shared channel
-*       < zero      Error code
-*/
-/****************************************************************************/
-
-int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
-}
-
-EXPORT_SYMBOL(dma_device_is_channel_shared);
-
-/****************************************************************************/
-/**
-*   Allocates buffers for the descriptors. This is normally done automatically
-*   but needs to be done explicitly when initiating a dma from interrupt
-*   context.
-*
-*   @return
-*       0       Descriptors were allocated successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-			  dma_addr_t srcData,	/* Place to get data to write to device */
-			  dma_addr_t dstData,	/* Pointer to device data address */
-			  size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int numDescriptors;
-	size_t ringBytesRequired;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if (devAttr->config.transferType != transferType) {
-		return -EINVAL;
-	}
-
-	/* Figure out how many descriptors we need. */
-
-	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
-	/*        srcData, dstData, numBytes); */
-
-	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
-							      (void *)srcData,
-							      (void *)dstData,
-							      numBytes);
-	if (numDescriptors < 0) {
-		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
-	/* a new one. */
-
-	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
-
-	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
-
-	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
-		/* Make sure that this code path is never taken from interrupt context. */
-		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
-		/* allocation needs to have already been done. */
-
-		might_sleep();
-
-		/* Free the old descriptor ring and allocate a new one. */
-
-		dma_free_descriptor_ring(&devAttr->ring);
-
-		/* And allocate a new one. */
-
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
-			       __func__, numDescriptors);
-			return rc;
-		}
-		/* Setup the descriptor for this transfer */
-
-		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
-					  devAttr->ring.physAddr,
-					  devAttr->ring.bytesAllocated,
-					  numDescriptors) < 0) {
-			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
-			       __func__);
-			return -EINVAL;
-		}
-	} else {
-		/* We've already got enough ring buffer allocated. All we need to do is reset */
-		/* any control information, just in case the previous DMA was stopped. */
-
-		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
-	}
-
-	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
-	/* as last time, then we don't need to call setDataDescriptor again. */
-
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* Remember the critical information for this transfer so that we can eliminate */
-	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
-
-	devAttr->prevSrcData = srcData;
-	devAttr->prevDstData = dstData;
-	devAttr->prevNumBytes = numBytes;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_alloc_descriptors);
-
-/****************************************************************************/
-/**
-*   Allocates and sets up descriptors for a double buffered circular buffer.
-*
-*   This is primarily intended to be used for things like the ingress samples
-*   from a microphone.
-*
-*   @return
-*       > 0     Number of descriptors actually allocated.
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-				     dma_addr_t srcData,	/* Physical address of source data */
-				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
-				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
-				     size_t numBytes	/* Number of bytes in each destination buffer */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int numDst1Descriptors;
-	int numDst2Descriptors;
-	int numDescriptors;
-	size_t ringBytesRequired;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	/* Figure out how many descriptors we need. */
-
-	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
-	/*        srcData, dstData, numBytes); */
-
-	numDst1Descriptors =
-	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
-					     (void *)dstData1, numBytes);
-	if (numDst1Descriptors < 0) {
-		return -EINVAL;
-	}
-	numDst2Descriptors =
-	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
-					     (void *)dstData2, numBytes);
-	if (numDst2Descriptors < 0) {
-		return -EINVAL;
-	}
-	numDescriptors = numDst1Descriptors + numDst2Descriptors;
-	/* printk("numDescriptors: %d\n", numDescriptors); */
-
-	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
-	/* a new one. */
-
-	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
-
-	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
-
-	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
-		/* Make sure that this code path is never taken from interrupt context. */
-		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
-		/* allocation needs to have already been done. */
-
-		might_sleep();
-
-		/* Free the old descriptor ring and allocate a new one. */
-
-		dma_free_descriptor_ring(&devAttr->ring);
-
-		/* And allocate a new one. */
-
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
-			       __func__, ringBytesRequired);
-			return rc;
-		}
-	}
-
-	/* Setup the descriptor for this transfer. Since this function is used with */
-	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
-	/* setDataDescriptor will keep trying to append onto the end. */
-
-	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
-				  devAttr->ring.physAddr,
-				  devAttr->ring.bytesAllocated,
-				  numDescriptors) < 0) {
-		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
-		return -EINVAL;
-	}
-
-	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
-	/* as last time, then we don't need to call setDataDescriptor again. */
-
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData1, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData2, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
-	/* try to make the 'prev' variables right. */
-
-	devAttr->prevSrcData = 0;
-	devAttr->prevDstData = 0;
-	devAttr->prevNumBytes = 0;
-
-	return numDescriptors;
-}
-
-EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
-
-/****************************************************************************/
-/**
-*   Initiates a transfer when the descriptors have already been setup.
-*
-*   This is a special case, and normally, the dma_transfer_xxx functions should
-*   be used.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_start_transfer(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
-				devAttr->ring.virtAddr);
-
-	/* Since we got this far, everything went successfully */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_start_transfer);
-
-/****************************************************************************/
-/**
-*   Stops a previously started DMA transfer.
-*
-*   @return
-*       0       Transfer was stopped successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_stop_transfer(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	dmacHw_stopTransfer(channel->dmacHwHandle);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_stop_transfer);
-
-/****************************************************************************/
-/**
-*   Waits for a DMA to complete by polling. This function is only intended
-*   to be used for testing. Interrupts should be used for most DMA operations.
-*/
-/****************************************************************************/
-
-int dma_wait_transfer_done(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	dmacHw_TRANSFER_STATUS_e status;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	while ((status =
-		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
-	       dmacHw_TRANSFER_STATUS_BUSY) {
-		;
-	}
-
-	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
-		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
-		return -EIO;
-	}
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_wait_transfer_done);
-
-/****************************************************************************/
-/**
-*   Initiates a DMA, allocating the descriptors as required.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
-*/
-/****************************************************************************/
-
-int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
-		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-		 dma_addr_t srcData,	/* Place to get data to write to device */
-		 dma_addr_t dstData,	/* Pointer to device data address */
-		 size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if (devAttr->config.transferType != transferType) {
-		return -EINVAL;
-	}
-
-	/* We keep track of the information about the previous request for this */
-	/* device, and if the attributes match, then we can use the descriptors we setup */
-	/* the last time, and not have to reinitialize everything. */
-
-	{
-		rc =
-		     dma_alloc_descriptors(handle, transferType, srcData,
-					   dstData, numBytes);
-		if (rc != 0) {
-			return rc;
-		}
-	}
-
-	/* And kick off the transfer */
-
-	devAttr->numBytes = numBytes;
-	devAttr->transferStartTime = timer_get_tick_count();
-
-	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
-				devAttr->ring.virtAddr);
-
-	/* Since we got this far, everything went successfully */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_transfer);
-
-/****************************************************************************/
-/**
-*   Set the callback function which will be called when a transfer completes.
-*   If a NULL callback function is set, then no callback will occur.
-*
-*   @note   @a devHandler will be called from IRQ context.
-*
-*   @return
-*       0       - Success
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
-			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
-			   void *userData	/* Pointer which will be passed to devHandler. */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-	unsigned long flags;
-
-	if (!IsDeviceValid(dev)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-	local_irq_save(flags);
-
-	devAttr->userData = userData;
-	devAttr->devHandler = devHandler;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_set_device_handler);
diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
deleted file mode 100644
index ca0ad736870b..000000000000
--- a/arch/arm/mach-bcmring/dma_device.c
+++ /dev/null
@@ -1,593 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma_device.c
-*
-*   @brief  private array of DMA_DeviceAttribute_t
-*/
-/****************************************************************************/
-
-DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
-	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "mem-to-mem",
-	 .config = {
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-
-		    },
-	 },
-	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
-	{
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
-	 .name = "vpm",
-	 .dedicatedController = 0,
-	 .dedicatedChannel = 0,
-	 /* reserve DMA0:0 for VPM */
-	 },
-	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "nand",
-	 .config = {
-		    .srcPeripheralPort = 0,
-		    .dstPeripheralPort = 0,
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
-		    },
-	 },
-	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
-	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
-	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
-	 .name = "pif_tx",
-	 .dmacPort = {14, 5},
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    /* dstPeripheralPort          = 5 or 14 */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .maxDataPerBlock = 16256,
-		    },
-	 },
-	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
-	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
-	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
-	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
-	 .name = "pif_rx",
-	 .dmacPort = {14, 5},
-	 .config = {
-		    /* srcPeripheralPort          = 5 or 14 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .maxDataPerBlock = 16256,
-		    },
-	 },
-	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "i2s0_rx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "i2s0_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 1,	/* DST: I2S0 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "i2s1_rx",
-	 .config = {
-		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "i2s1_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 3,	/* DST: I2S1 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
-	{
-	 .name = "esw_tx",
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
-	 .dedicatedController = 1,
-	 .dedicatedChannel = 3,
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    /* DMAx_AHB_SSTATARy */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    /* DMAx_AHB_DSTATARy */
-		    .dstStatusRegisterAddress = 0x30490010,
-		    /* DMAx_AHB_CFGy */
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    /* DMAx_AHB_CTLy */
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    },
-	 },
-	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
-	{
-	 .name = "esw_rx",
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
-	 .dedicatedController = 1,
-	 .dedicatedChannel = 2,
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    /* DMAx_AHB_SSTATARy */
-		    .srcStatusRegisterAddress = 0x30480010,
-		    /* DMAx_AHB_DSTATARy */
-		    .dstStatusRegisterAddress = 0x00000000,
-		    /* DMAx_AHB_CFGy */
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    /* DMAx_AHB_CTLy */
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_a_rx",
-	 .config = {
-		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_a_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_b_rx",
-	 .config = {
-		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_b_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "apm_c_rx",
-	 .config = {
-		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "pcm0_rx",
-	 .config = {
-		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "pcm0_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 13,	/* DST: PCM0 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "pcm1_rx",
-	 .config = {
-		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "pcm1_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 15,	/* DST: PCM1 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "spum_rx",
-	 .config = {
-		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    /* Busrt size **MUST** be 16 for SPUM to work */
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    /* on the RX side, SPU needs to be the flow controller */
-		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
-		    },
-	 },
-	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "spum_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 7,	/* DST: SPUM */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    /* Busrt size **MUST** be 16 for SPUM to work */
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "mem-to-vram",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    },
-	 },
-	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "vram-to-mem",
-	 .config = {
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    },
-	 },
-};
-EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
deleted file mode 100644
index f01da877148e..000000000000
--- a/arch/arm/mach-bcmring/include/cfg_global.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _CFG_GLOBAL_H_
-#define _CFG_GLOBAL_H_
-
-#include <cfg_global_defines.h>
-
-#define CFG_GLOBAL_CHIP                         BCM11107
-#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
-#define CFG_GLOBAL_CHIP_REV                     0xB0
-#define CFG_GLOBAL_RAM_SIZE                     0x10000000
-#define CFG_GLOBAL_RAM_BASE                     0x00000000
-#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
-
-#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
deleted file mode 100644
index b5beb0b30734..000000000000
--- a/arch/arm/mach-bcmring/include/cfg_global_defines.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CFG_GLOBAL_DEFINES_H
-#define CFG_GLOBAL_DEFINES_H
-
-/* CHIP */
-#define BCM1103 1
-
-#define BCM1191 4
-#define BCM2153 5
-#define BCM2820 6
-
-#define BCM2826 8
-#define FPGA11107 9
-#define BCM11107   10
-#define BCM11109   11
-#define BCM11170   12
-#define BCM11110   13
-#define BCM11211   14
-
-/* CFG_GLOBAL_CHIP_FAMILY types */
-#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
-#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
-#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
-#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
-
-#define IMAGE_HEADER_SIZE_CHECKSUM    4
-#endif
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
deleted file mode 100644
index caa20e59db99..000000000000
--- a/arch/arm/mach-bcmring/include/csp/cache.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_CACHE_H
-#define CSP_CACHE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <asm/cacheflush.h>
-
-#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
-
-#else
-
-#define CSP_CACHE_FLUSH_ALL
-
-#endif
-
-#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
deleted file mode 100644
index 8b3d80367293..000000000000
--- a/arch/arm/mach-bcmring/include/csp/delay.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_DELAY_H
-#define CSP_DELAY_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-/* Some CSP routines require use of the following delay routines. Use the OS */
-/* version if available, otherwise use a CSP specific definition. */
-/* void udelay(unsigned long usecs); */
-/* void mdelay(unsigned long msecs); */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-   #include <linux/delay.h>
-#else
-   #include <mach/csp/delay.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
deleted file mode 100644
index e6a1dc484ca7..000000000000
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ /dev/null
@@ -1,596 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw.h
-*
-*  @brief   API definitions for low level DMA controller driver
-*
-*/
-/****************************************************************************/
-#ifndef _DMACHW_H
-#define _DMACHW_H
-
-#include <stddef.h>
-
-#include <csp/stdint.h>
-#include <mach/csp/dmacHw_reg.h>
-
-/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
-
-   System specific channel ID should be defined as follows
-
-   For example:
-
-   #include <dmacHw.h>
-   ...
-   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
-   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
-   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
-   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
-   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
-   ...
-   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
-   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
-   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
-   ...
-*/
-#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
-
-typedef enum {
-	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
-	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
-	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
-	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
-	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
-	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
-	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
-	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
-} dmacHw_CHANNEL_PRIORITY_e;
-
-/* Source destination master interface */
-typedef enum {
-	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
-	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
-	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
-	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
-} dmacHw_MASTER_INTERFACE_e;
-
-typedef enum {
-	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
-} dmacHw_TRANSACTION_WIDTH_e;
-
-typedef enum {
-	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
-	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
-	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-} dmacHw_BURST_WIDTH_e;
-
-typedef enum {
-	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
-	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
-	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
-	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
-} dmacHw_TRANSFER_TYPE_e;
-
-typedef enum {
-	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
-	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
-	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
-} dmacHw_TRANSFER_MODE_e;
-
-typedef enum {
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
-} dmacHw_ADDRESS_UPDATE_MODE_e;
-
-typedef enum {
-	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
-	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
-} dmacHw_FLOW_CONTROL_e;
-
-typedef enum {
-	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
-	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
-	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
-} dmacHw_TRANSFER_STATUS_e;
-
-typedef enum {
-	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
-	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
-} dmacHw_INTERRUPT_e;
-
-typedef enum {
-	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
-	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
-	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
-	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
-} dmacHw_INTERRUPT_STATUS_e;
-
-typedef enum {
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
-	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
-} dmacHw_CONTROLLER_ATTRIB_e;
-
-typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
-typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
-				   "dmacHw_MAKE_CHANNEL_ID" macro
-				 */
-/* DMA channel configuration parameters */
-typedef struct {
-	uint32_t srcPeripheralPort;	/* Source peripheral port */
-	uint32_t dstPeripheralPort;	/* Destination peripheral port */
-	uint32_t srcStatusRegisterAddress;	/* Source status register address */
-	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
-
-	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
-	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
-	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
-	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
-	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
-					   0 = Maximum possible.
-					 */
-
-	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
-	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
-	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
-	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
-	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
-	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
-	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
-	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
-	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
-	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
-	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
-	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
-	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
-	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
-	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
-} dmacHw_CONFIG_t;
-
-/****************************************************************************/
-/**
-*  @brief   Initializes DMA
-*
-*  This function initializes DMA CSP driver
-*
-*  @note
-*     Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void);
-
-/****************************************************************************/
-/**
-*  @brief   Exit function for  DMA
-*
-*  This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void);
-
-/****************************************************************************/
-/**
-*  @brief   Gets a handle to a DMA channel
-*
-*  This function returns a handle, representing a control block of a particular DMA channel
-*
-*  @return  -1       - On Failure
-*            handle  - On Success, representing a channel control block
-*
-*  @note
-*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Initializes a DMA channel for use
-*
-*  This function initializes and resets a DMA channel for use
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-				    size_t dataLen	/*   [ IN ] Data length in bytes */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Initializes descriptor ring
-*
-*  This function will initializes the descriptor ring of a DMA channel
-*
-*
-*  @return   -1 - On failure
-*             0 - On success
-*  @note
-*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
-*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
-*       is accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
-			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
-			  uint32_t len,	/*  [ IN ] Size of the pBuf */
-			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Finds amount of memory required to form a descriptor ring
-*
-*
-*  @return   Number of bytes required to form a descriptor ring
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Configure DMA channel
-*
-*  @return  0  : On success
-*           -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptors for known data length
-*
-*  When DMA has to work as a flow controller, this function prepares the
-*  descriptor chain to transfer data
-*
-*  from:
-*          - Memory to memory
-*          - Peripheral to memory
-*          - Memory to Peripheral
-*          - Peripheral to Peripheral
-*
-*  @return   -1 - On failure
-*             0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
-			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
-			     size_t dataLen	/*  [ IN ] Length in bytes   */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Indicates whether DMA transfer is in progress or completed
-*
-*  @return   DMA transfer status
-*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
-*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
-*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptor carrying control information
-*
-*  This function will be used to send specific control information to the device
-*  using the DMA channel
-*
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
-				uint32_t control	/*  [ IN ] Device control information */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Read data DMA transferred to memory
-*
-*  This function will read data that has been DMAed to memory while transferring from:
-*          - Memory to memory
-*          - Peripheral to memory
-*
-*  @return  0 - No more data is available to read
-*           1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
-			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
-			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			       void **ppBbuf,	/*  [ OUT ] Data received */
-			       size_t *pLlen	/*  [ OUT ] Length of the data received */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
-*
-*  This function will form the descriptor ring by allocating buffers, when source peripheral
-*  has to work as a flow controller to transfer data from:
-*           - Peripheral to memory.
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
-				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
-				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
-				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
-				     int num	/*  [ IN ] Number of descriptor to set */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to initiate transfer
-*
-*  @return  void
-*
-*
-*  @note
-*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
-*     - This function should also be called from ISR to program the channel with
-*       pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Resets descriptor control information
-*
-*  @return  void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to stop transfer
-*
-*  Ensures the channel is not doing any transfer after calling this function
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Check the existence of pending descriptor
-*
-*  This function confirmes if there is any pending descriptor in the chain
-*  to program the channel
-*
-*  @return  1 : Channel need to be programmed with pending descriptor
-*           0 : No more pending descriptor to programe the channel
-*
-*  @note
-*     - This function should be called from ISR in case there are pending
-*       descriptor to program the channel.
-*
-*     Example:
-*
-*     dmac_isr ()
-*     {
-*         ...
-*         if (dmacHw_descriptorPending (handle))
-*         {
-*            dmacHw_initiateTransfer (handle);
-*         }
-*     }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Deallocates source or destination memory, allocated
-*
-*  This function can be called to deallocate data memory that was DMAed successfully
-*
-*  @return  -1  - On failure
-*            0  - On success
-*
-*  @note
-*     This function will be called ONLY, when source OR destination address is pointing
-*     to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the DMA channel specific interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Returns the cause of channel specific DMA interrupt
-*
-*  This function returns the cause of interrupt
-*
-*  @return  Interrupt status, each bit representing a specific type of interrupt
-*           of type dmacHw_INTERRUPT_STATUS_e
-*  @note
-*           This function should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a DMA channel causing interrupt
-*
-*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-*  @return  NULL   : No channel causing DMA interrupt
-*           ! NULL : Handle to a channel causing DMA interrupt
-*  @note
-*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-*  @brief   Sets channel specific user data
-*
-*  This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			       void *userData	/*  [ IN ] User data  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Gets channel specific user data
-*
-*  This function returns user data specific to a DMA channel
-*
-*  @return   user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Displays channel specific registers and other control parameters
-*
-*
-*  @return  void
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Provides DMA controller attributes
-*
-*
-*  @return  DMA controller attributes
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
-    );
-
-#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
deleted file mode 100644
index 51357dd5b666..000000000000
--- a/arch/arm/mach-bcmring/include/csp/errno.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_ERRNO_H
-#define CSP_ERRNO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if   defined(__KERNEL__)
-#include <linux/errno.h>
-#elif defined(CSP_SIMULATION)
-#include <asm-generic/errno.h>
-#else
-#include <errno.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
deleted file mode 100644
index 1c639c8ee08f..000000000000
--- a/arch/arm/mach-bcmring/include/csp/intcHw.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-/****************************************************************************/
-/**
-*  @file    intcHw.h
-*
-*  @brief   generic interrupt controller API
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_H
-#define _INTCHW_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/intcHw_reg.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask);
-static inline void intcHw_irq_enable(void *basep, uint32_t mask);
-
-#endif /* _INTCHW_H */
-
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
deleted file mode 100644
index c30d2a5975a6..000000000000
--- a/arch/arm/mach-bcmring/include/csp/module.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_MODULE_H
-#define CSP_MODULE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-    #include <linux/module.h>
-#else
-    #define EXPORT_SYMBOL(symbol)
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
deleted file mode 100644
index 56654d23c3d7..000000000000
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    reg.h
-*
-*  @brief   Generic register definitions used in CSP
-*/
-/****************************************************************************/
-
-#ifndef CSP_REG_H
-#define CSP_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define __REG32(x)      (*((volatile uint32_t *)(x)))
-#define __REG16(x)      (*((volatile uint16_t *)(x)))
-#define __REG8(x)       (*((volatile uint8_t *) (x)))
-
-/* Macros used to define a sequence of reserved registers. The start / end */
-/* are byte offsets in the particular register definition, with the "end" */
-/* being the offset of the next un-reserved register. E.g. if offsets */
-/* 0x10 through to 0x1f are reserved, then this reserved area could be */
-/* specified as follows. */
-/*  typedef struct */
-/*  { */
-/*      uint32_t reg1;           offset 0x00 */
-/*      uint32_t reg2;           offset 0x04 */
-/*      uint32_t reg3;           offset 0x08 */
-/*      uint32_t reg4;           offset 0x0c */
-/*      REG32_RSVD(0x10, 0x20); */
-/*      uint32_t reg5;           offset 0x20 */
-/*      ... */
-/*  } EXAMPLE_REG_t; */
-#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
-#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
-#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
-/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
-/* flags variable to be declared locally. */
-/* e.g. */
-/*    statement1; */
-/*    { */
-/*       REG_LOCAL_IRQ_SAVE; */
-/*       <multiple statements here> */
-/*       REG_LOCAL_IRQ_RESTORE; */
-/*    } */
-/*    statement2; */
-/*  */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <mach/hardware.h>
-#include <linux/interrupt.h>
-
-#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
-	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
-
-#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
-
-#else
-
-#define REG_LOCAL_IRQ_SAVE
-#define REG_LOCAL_IRQ_RESTORE
-
-#endif
-
-static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg &= value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg |= value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
-				     uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg = (*reg & mask) | value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
-{
-	*reg = value;
-}
-
-#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
deleted file mode 100644
index b9d7e0732dfc..000000000000
--- a/arch/arm/mach-bcmring/include/csp/secHw.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw.h
-*
-*  @brief   Definitions for accessing low level security features
-*
-*/
-/****************************************************************************/
-#ifndef SECHW_H
-#define SECHW_H
-
-typedef void (*secHw_FUNC_t) (void);
-
-typedef enum {
-	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
-	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
-} secHw_MODE;
-
-/****************************************************************************/
-/**
-*  @brief   Requesting to execute the function in secure mode
-*
-*  This function requests the given function to run in secure mode
-*
-*/
-/****************************************************************************/
-void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Sets the  mode
-*
-*  his function sets the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_SetMode(secHw_MODE	/* Processor mode */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Get the current mode
-*
-*  This function retieves the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_GetMode(secHw_MODE *);
-
-#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
deleted file mode 100644
index 3a8718bbf700..000000000000
--- a/arch/arm/mach-bcmring/include/csp/stdint.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_STDINT_H
-#define CSP_STDINT_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
deleted file mode 100644
index ad9e4005f141..000000000000
--- a/arch/arm/mach-bcmring/include/csp/string.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-
-#ifndef CSP_STRING_H
-#define CSP_STRING_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-   #include <linux/string.h>
-#else
-   #include <string.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_STRING_H */
-
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
deleted file mode 100644
index 2cbb530db8ea..000000000000
--- a/arch/arm/mach-bcmring/include/csp/tmrHw.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw.h
-*
-*  @brief   API definitions for low level Timer driver
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_H
-#define _TMRHW_H
-
-#include <csp/stdint.h>
-
-typedef uint32_t tmrHw_ID_t;	/* Timer ID */
-typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
-typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
-typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
-
-typedef enum {
-	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
-	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
-} tmrHw_INTERRUPT_STATUS_e;
-
-typedef enum {
-	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
-	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
-} tmrHw_CAPABILITY_e;
-
-/****************************************************************************/
-/**
-*  @brief   Get timer capability
-*
-*  This function returns various capabilities/attributes of a timer
-*
-*  @return  Numeric capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer in terms of timer interrupt rate
-*
-*  This function initializes a periodic timer to generate specific number of
-*  timer interrupt per second
-*
-*  @return   On success: Effective timer frequency
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt after
-*           certain time interval
-*
-*  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in millisecond
-*
-*  @return   On success: Effective interval set in mili-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt just once
-*           after certain time interval
-*
-*  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in millisecond
-*
-*  @return   On success: Effective interval set in mili-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a timer to run as a free running timer
-*
-*  This function initializes a timer to run as a free running timer
-*
-*  @return   Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Starts a timer
-*
-*  This function starts a preconfigured timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Stops a timer
-*
-*  This function stops a running timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Gets current timer count
-*
-*  This function returns the current timer value
-*
-*  @return  Current downcounting timer value
-*
-*/
-/****************************************************************************/
-tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Gets timer count rate
-*
-*  This function returns the number of counts per second
-*
-*  @return  Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Enables timer interrupt
-*
-*  This function enables the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Disables timer interrupt
-*
-*  This function disable the timer interrupt
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the timer interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Gets the interrupt status
-*
-*  This function returns timer interrupt status
-*
-*  @return   Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a timer causing interrupt
-*
-*  This functions returns a timer causing interrupt
-*
-*  @return  0xFFFFFFFF   : No timer causing an interrupt
-*           ! 0xFFFFFFFF : timer causing an interrupt
-*  @note
-*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-*  @brief   Displays specific timer registers
-*
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-		  unsigned long usecs	/*  [ IN ] usec to delay */
-) __attribute__ ((section(".aramtext")));
-
-#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
deleted file mode 100644
index 30fa2d540630..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/cap.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*****************************************************************************
-* Copyright 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CAP_H
-#define CAP_H
-
-/* ---- Include Files ---------------------------------------------------- */
-/* ---- Public Constants and Types --------------------------------------- */
-typedef enum {
-	CAP_NOT_PRESENT = 0,
-	CAP_PRESENT
-} CAP_RC_T;
-
-typedef enum {
-	CAP_VPM,
-	CAP_ETH_PHY,
-	CAP_ETH_GMII,
-	CAP_ETH_SGMII,
-	CAP_USB,
-	CAP_TSC,
-	CAP_EHSS,
-	CAP_SDIO,
-	CAP_UARTB,
-	CAP_KEYPAD,
-	CAP_CLCD,
-	CAP_GE,
-	CAP_LEDM,
-	CAP_BBL,
-	CAP_VDEC,
-	CAP_PIF,
-	CAP_APM,
-	CAP_SPU,
-	CAP_PKA,
-	CAP_RNG,
-} CAP_CAPABILITY_T;
-
-typedef enum {
-	CAP_LCD_WVGA = 0,
-	CAP_LCD_VGA = 0x1,
-	CAP_LCD_WQVGA = 0x2,
-	CAP_LCD_QVGA = 0x3
-} CAP_LCD_RES_T;
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
-static inline uint32_t cap_getMaxArmSpeedHz(void);
-static inline uint32_t cap_getMaxVpmSpeedHz(void);
-static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
-
-#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
deleted file mode 100644
index 933ce68ed90b..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
+++ /dev/null
@@ -1,409 +0,0 @@
-/*****************************************************************************
-* Copyright 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CAP_INLINE_H
-#define CAP_INLINE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/cap.h>
-#include <cfg_global.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-#define CAP_CONFIG0_VPM_DIS          0x00000001
-#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
-#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
-#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
-#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
-#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
-#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
-#define CAP_CONFIG0_USB0_DIS         0x00000080
-#define CAP_CONFIG0_USB1_DIS         0x00000100
-#define CAP_CONFIG0_TSC_DIS          0x00000200
-#define CAP_CONFIG0_EHSS0_DIS        0x00000400
-#define CAP_CONFIG0_EHSS1_DIS        0x00000800
-#define CAP_CONFIG0_SDIO0_DIS        0x00001000
-#define CAP_CONFIG0_SDIO1_DIS        0x00002000
-#define CAP_CONFIG0_UARTB_DIS        0x00004000
-#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
-#define CAP_CONFIG0_CLCD_DIS         0x00010000
-#define CAP_CONFIG0_GE_DIS           0x00020000
-#define CAP_CONFIG0_LEDM_DIS         0x00040000
-#define CAP_CONFIG0_BBL_DIS          0x00080000
-#define CAP_CONFIG0_VDEC_DIS         0x00100000
-#define CAP_CONFIG0_PIF_DIS          0x00200000
-#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
-#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
-
-#define CAP_CONFIG1_APMA_DIS         0x00000001
-#define CAP_CONFIG1_APMB_DIS         0x00000002
-#define CAP_CONFIG1_APMC_DIS         0x00000004
-#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
-#define CAP_CONFIG1_CLCD_RES_SHIFT   9
-#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-
-#define CAP_CONFIG2_SPU_DIS          0x00000010
-#define CAP_CONFIG2_PKA_DIS          0x00000020
-#define CAP_CONFIG2_RNG_DIS          0x00000080
-
-#if   (CFG_GLOBAL_CHIP == BCM11107)
-#define capConfig0 0
-#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 3
-#elif (CFG_GLOBAL_CHIP == FPGA11107)
-#define capConfig0 0
-#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 3
-#elif (CFG_GLOBAL_CHIP == BCM11109)
-#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11170)
-#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11110)
-#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 CAP_CONFIG1_APMC_DIS
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
-#define capConfig1 CAP_CONFIG1_APMC_DIS
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 2
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
-#define CAP_HW_CFG_ARM_CLK_HZ 500000000
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-#define CAP_HW_CFG_ARM_CLK_HZ 300000000
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-#define CAP_HW_CFG_ARM_CLK_HZ 666666666
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
-#define CAP_HW_CFG_VPM_CLK_HZ 333333333
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-#define CAP_HW_CFG_VPM_CLK_HZ 200000000
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/****************************************************************************
-*  cap_isPresent -
-*
-*  PURPOSE:
-*     Determines if the chip has a certain capability present
-*
-*  PARAMETERS:
-*     capability - type of capability to determine if present
-*
-*  RETURNS:
-*     CAP_PRESENT or CAP_NOT_PRESENT
-****************************************************************************/
-static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
-{
-	CAP_RC_T returnVal = CAP_NOT_PRESENT;
-
-	switch (capability) {
-	case CAP_VPM:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_PHY:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_GMII:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_SGMII:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_USB:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_TSC:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_EHSS:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_SDIO:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_UARTB:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_KEYPAD:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_CLCD:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_GE:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_LEDM:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_BBL:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_VDEC:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_PIF:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_APM:
-		{
-			if ((index == 0)
-			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 2)
-			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_SPU:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_PKA:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_RNG:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	default:
-		{
-		}
-		break;
-	}
-	return returnVal;
-}
-
-/****************************************************************************
-*  cap_getMaxArmSpeedHz -
-*
-*  PURPOSE:
-*     Determines the maximum speed of the ARM CPU
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*     clock speed in Hz that the ARM processor is able to run at
-****************************************************************************/
-static inline uint32_t cap_getMaxArmSpeedHz(void)
-{
-#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
-	return 500000000;
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-	return 300000000;
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-	return 666666666;
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-}
-
-/****************************************************************************
-*  cap_getMaxVpmSpeedHz -
-*
-*  PURPOSE:
-*     Determines the maximum speed of the VPM
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*     clock speed in Hz that the VPM is able to run at
-****************************************************************************/
-static inline uint32_t cap_getMaxVpmSpeedHz(void)
-{
-#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
-	return 333333333;
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-	return 200000000;
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-}
-
-/****************************************************************************
-*  cap_getMaxLcdRes -
-*
-*  PURPOSE:
-*     Determines the maximum LCD resolution capabilities
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
-*
-****************************************************************************/
-static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
-{
-	return (CAP_LCD_RES_T)
-		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
-		 CAP_CONFIG1_CLCD_RES_SHIFT);
-}
-
-#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
deleted file mode 100644
index 161973385faf..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
+++ /dev/null
@@ -1,1123 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CHIPC_DEF_H
-#define CHIPC_DEF_H
-
-/* ---- Include Files ----------------------------------------------------- */
-
-#include <csp/stdint.h>
-#include <csp/errno.h>
-#include <csp/reg.h>
-#include <mach/csp/chipcHw_reg.h>
-
-/* ---- Public Constants and Types ---------------------------------------- */
-
-/* Set 1 to configure DDR/VPM phase alignment by HW */
-#define chipcHw_DDR_HW_PHASE_ALIGN    0
-#define chipcHw_VPM_HW_PHASE_ALIGN    0
-
-typedef uint32_t chipcHw_freq;
-
-/* Configurable miscellaneous clocks */
-typedef enum {
-	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
-	chipcHw_CLOCK_ARM,	/* ARM Clock */
-	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
-	chipcHw_CLOCK_VPM,	/* VPM Clock */
-	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
-	chipcHw_CLOCK_UART,	/* UART Clock */
-	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
-	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
-	chipcHw_CLOCK_SPI,	/* SPI Clock */
-	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
-
-	chipcHw_CLOCK_BUS,	/* BUS Clock */
-	chipcHw_CLOCK_OTP,	/* OTP Clock */
-	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
-	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
-	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
-	chipcHw_CLOCK_APM100,	/* APM100 Clock */
-	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
-	chipcHw_CLOCK_LED,	/* LED Clock */
-
-	chipcHw_CLOCK_USB,	/* USB Clock */
-	chipcHw_CLOCK_LCD,	/* LCD CLock */
-	chipcHw_CLOCK_APM,	/* APM Clock */
-
-	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
-} chipcHw_CLOCK_e;
-
-/* System booting strap options */
-typedef enum {
-	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
-	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
-	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
-	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
-	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
-	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
-} chipcHw_BOOT_DEVICE_e;
-
-/* System booting modes */
-typedef enum {
-	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
-	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
-	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
-	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
-} chipcHw_BOOT_MODE_e;
-
-/* NAND Flash page size strap options */
-typedef enum {
-	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
-	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
-	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
-	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
-} chipcHw_NAND_PAGESIZE_e;
-
-/* GPIO Pin function */
-typedef enum {
-	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
-	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
-	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
-	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
-	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
-	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
-	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
-	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
-	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
-	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
-	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
-	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
-	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
-	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
-} chipcHw_GPIO_FUNCTION_e;
-
-/* PIN Output slew rate */
-typedef enum {
-	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
-	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
-} chipcHw_PIN_SLEW_RATE_e;
-
-/* PIN Current drive strength */
-typedef enum {
-	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
-	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
-	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
-	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
-	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
-	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
-} chipcHw_PIN_CURRENT_STRENGTH_e;
-
-/* PIN Pull up register settings */
-typedef enum {
-	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
-	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
-	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
-} chipcHw_PIN_PULL_e;
-
-/* PIN input type settings */
-typedef enum {
-	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
-	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
-} chipcHw_PIN_INPUTTYPE_e;
-
-/* Allow/Disalow the support of spread spectrum  */
-typedef enum {
-	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
-	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
-} chipcHw_SPREAD_SPECTRUM_e;
-
-typedef struct {
-	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
-						   If supported, call chipcHw_enableSpreadSpectrum ()
-						   to activate the spread spectrum with desired spread. */
-	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
-	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
-	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
-	uint32_t armBusRatio;	/* ARM clock : Bus clock */
-	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
-	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
-} chipcHw_INIT_PARAM_t;
-
-/* CHIP revision number */
-typedef enum {
-	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
-	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
-} chipcHw_REV_NUMBER_e;
-
-typedef enum {
-	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
-	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
-	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
-	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
-} chipcHw_VPM_HW_PHASE_INTR_e;
-
-typedef enum {
-	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
-	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
-	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
-} chipcHw_DDR_HW_PHASE_MARGIN_e;
-
-typedef enum {
-	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
-	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
-	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
-} chipcHw_VPM_HW_PHASE_MARGIN_e;
-
-#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
-
-/* Programmable pin defines */
-#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
-									     /* GPIO pin 0 - 60 */
-#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
-#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
-#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
-#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
-#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
-#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
-#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
-#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
-#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
-#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
-#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
-#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
-#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
-#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
-#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
-#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
-#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the clock module
-*
-*/
-/****************************************************************************/
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Enables the PLL1
-*
-*  This function enables the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
-			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Enables the PLL2
-*
-*  This function enables the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL1
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll1Disable(void);
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL2
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll2Disable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in KHz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in Hz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
-				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success ( # of adjustment required )
-*            -1 : On failure
-*/
-/****************************************************************************/
-int chipcHw_vpmPhaseAlign(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables core a clock of a certain device
-*
-*  This function enables a core clock
-*
-*  @return  void
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disabled a core clock of a certain device
-*
-*  This function disables a core clock
-*
-*  @return  void
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Enables bypass clock of a certain device
-*
-*  This function enables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disabled bypass clock of a certain device
-*
-*  This function disables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Get Numeric Chip ID
-*
-*  This function returns Chip ID that includes the revison number
-*
-*  @return  Complete numeric Chip ID
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipId(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get Chip Product ID
-*
-*  This function returns Chip Product ID
-*
-*  @return  Chip Product ID
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipProductId(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get revision number
-*
-*  This function returns revision number of the chip
-*
-*  @return  Revision number
-*/
-/****************************************************************************/
-static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables bus interface clock
-*
-*  Enables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disables bus interface clock
-*
-*  Disables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Enables various audio channels
-*
-*  Enables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disables various audio channels
-*
-*  Disables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Soft resets devices
-*
-*  Soft resets various devices
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
-*/
-/****************************************************************************/
-static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Configures misc CHIP functionality
-*
-*  Configures CHIP functionality
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Set OTP options
-*
-*  Set OTP options
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_OTP_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Get sticky bits
-*
-*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getStickyBits(void);
-
-/****************************************************************************/
-/**
-*  @brief    Set sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Clear sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Get software override strap options
-*
-*  Retrieves software override strap options
-*
-*  @return   Software override strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getSoftStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Set software override strap options
-*
-*  set software override strap options
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
-
-/****************************************************************************/
-/**
-*  @brief    Get pin strap options
-*
-*  Retrieves pin strap options
-*
-*  @return   Pin strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getPinStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Get valid pin strap options
-*
-*  Retrieves valid pin strap options
-*
-*  @return   valid Pin strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getValidStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Initialize valid pin strap options
-*
-*  Retrieves valid pin strap options by copying HW strap options to soft register
-*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_initValidStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get status (enabled/disabled) of bus interface clock
-*
-*  This function returns the status of devices' bus interface clock
-*
-*  @return  Bus interface clock
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get boot device
-*
-*  This function returns the device type used in booting the system
-*
-*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get boot mode
-*
-*  This function returns the way the system was booted
-*
-*  @return  Boot mode of type chipcHw_BOOT_MODE_e
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash page size
-*
-*  This function returns the NAND device page size
-*
-*  @return  Boot NAND device page size
-*
-*/
-/****************************************************************************/
-static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash address cycle configuration
-*
-*  This function returns the NAND flash address cycle configuration
-*
-*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
-*
-*/
-/****************************************************************************/
-static inline int chipcHw_getNandExtraCycle(void);
-
-/****************************************************************************/
-/**
-*  @brief   Activates PIF interface
-*
-*  This function activates PIF interface by taking control of LCD pins
-*
-*  @note
-*       When activated, LCD pins will be defined as follows for PIF operation
-*
-*       CLD[17:0]  = pif_data[17:0]
-*       CLD[23:18] = pif_address[5:0]
-*       CLPOWER    = pif_wr_str
-*       CLCP       = pif_rd_str
-*       CLAC       = pif_hat1
-*       CLFP       = pif_hrdy1
-*       CLLP       = pif_hat2
-*       GPIO[42]   = pif_hrdy2
-*
-*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_activatePifInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Activates LCD interface
-*
-*  This function activates LCD interface
-*
-*  @note
-*       When activated, LCD pins will be defined as follows
-*
-*       CLD[17:0]  = LCD data
-*       CLD[23:18] = LCD data
-*       CLPOWER    = LCD power
-*       CLCP       =
-*       CLAC       = LCD ack
-*       CLFP       =
-*       CLLP       =
-*/
-/****************************************************************************/
-static inline void chipcHw_activateLcdInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Deactivates PIF/LCD interface
-*
-*  This function deactivates PIF/LCD interface
-*
-*  @note
-*       When deactivated LCD pins will be in rti-stated
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_deactivatePifLcdInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get to know the configuration of GPIO pin
-*
-*/
-/****************************************************************************/
-static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Configure GPIO pin function
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
-					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin slew rate
-*
-*  This function sets the slew of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin output drive current
-*
-*  This function sets output drive current of individual pin
-*
-*  Note: Avoid the use of the word 'current' since linux headers define this
-*        to be the current task.
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin pullup register
-*
-*  This function sets pullup register of individual  pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin input type
-*
-*  This function sets input type of individual Pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Retrieves a string representation of the mux setting for a pin.
-*
-*  @return  Pointer to a character string.
-*/
-/****************************************************************************/
-
-const char *chipcHw_getGpioPinFunctionStr(int pin);
-
-/****************************************************************************/
-/**  @brief issue warmReset
- */
-/****************************************************************************/
-void chipcHw_reset(uint32_t mask);
-
-/****************************************************************************/
-/**  @brief clock reconfigure
- */
-/****************************************************************************/
-void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
-			   uint32_t ddrRatio);
-
-/****************************************************************************/
-/**
-*  @brief   Enable Spread Spectrum
-*
-*  @note chipcHw_Init() must be called earlier
-*/
-/****************************************************************************/
-static inline void chipcHw_enableSpreadSpectrum(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable Spread Spectrum
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_disableSpreadSpectrum(void);
-
-/****************************************************************************/
-/**  @brief Checks if software strap is enabled
- *
- *   @return 1 : When enable
- *           0 : When disable
- */
-/****************************************************************************/
-static inline int chipcHw_isSoftwareStrapsEnable(void);
-
-/****************************************************************************/
-/**  @brief Enable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsEnable(void);
-
-/****************************************************************************/
-/**  @brief Disable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsDisable(void);
-
-/****************************************************************************/
-/**  @brief PLL test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL2 test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestDisable(void);
-
-/****************************************************************************/
-/**  @brief PLL2 test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestDisable(void);
-
-/****************************************************************************/
-/**  @brief Get PLL test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPllTestEnable(void);
-
-/****************************************************************************/
-/**  @brief Get PLL2 test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPll2TestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL test select
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestSelect(uint32_t val);
-
-/****************************************************************************/
-/**  @brief PLL2 test select
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestSelect(uint32_t val);
-
-/****************************************************************************/
-/**  @brief Get PLL test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPllTestSelected(void);
-
-/****************************************************************************/
-/**  @brief Get PLL2 test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPll2TestSelected(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM SW phase alignment interrupt mode
-*
-*  This function sets VPM phase alignment interrupt
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set DDR phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Checks DDR phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
-
-/****************************************************************************/
-/**
-*  @brief   Checks VPM phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrPhaseControl(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmPhaseControl(void);
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a DDR phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a VPM phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Clear DDR phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
-
-/****************************************************************************/
-/**
-*  @brief   Clear VPM phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
-
-/* ---- Private Constants and Types -------------------------------------- */
-
-#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
deleted file mode 100644
index 03238c299001..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
+++ /dev/null
@@ -1,1673 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CHIPC_INLINE_H
-#define CHIPC_INLINE_H
-
-/* ---- Include Files ----------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/reg.h>
-#include <mach/csp/chipcHw_reg.h>
-#include <mach/csp/chipcHw_def.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-typedef enum {
-	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
-	chipcHw_OPTYPE_OUTPUT	/* Output operation */
-} chipcHw_OPTYPE_e;
-
-/* ---- Public Constants and Types ---------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------- */
-/* ---- Public Function Prototypes ---------------------------------------- */
-/* ---- Private Function Prototypes --------------------------------------- */
-static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
-				    chipcHw_OPTYPE_e type, int mode);
-
-/****************************************************************************/
-/**
-*  @brief   Get Numeric Chip ID
-*
-*  This function returns Chip ID that includes the revison number
-*
-*  @return  Complete numeric Chip ID
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipId(void)
-{
-	return pChipcHw->ChipId;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable Spread Spectrum
-*
-*  @note chipcHw_Init() must be called earlier
-*/
-/****************************************************************************/
-static inline void chipcHw_enableSpreadSpectrum(void)
-{
-	if ((pChipcHw->
-	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
-	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
-		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
-		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
-		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
-		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
-		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable Spread Spectrum
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_disableSpreadSpectrum(void)
-{
-	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Chip Product ID
-*
-*  This function returns Chip Product ID
-*
-*  @return  Chip Product ID
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipProductId(void)
-{
-	return (pChipcHw->
-		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
-		chipcHw_REG_CHIPID_BASE_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get revision number
-*
-*  This function returns revision number of the chip
-*
-*  @return  Revision number
-*/
-/****************************************************************************/
-static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
-{
-	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables bus interface clock
-*
-*  Enables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables bus interface clock
-*
-*  Disables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get status (enabled/disabled) of bus interface clock
-*
-*  This function returns the status of devices' bus interface clock
-*
-*  @return  Bus interface clock
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
-{
-	return pChipcHw->BusIntfClock;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables various audio channels
-*
-*  Enables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->AudioEnable, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables various audio channels
-*
-*  Disables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Soft resets devices
-*
-*  Soft resets various devices
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
-*/
-/****************************************************************************/
-static inline void chipcHw_softReset(uint64_t mask)
-{
-	chipcHw_softResetEnable(mask);
-	chipcHw_softResetDisable(mask);
-}
-
-static inline void chipcHw_softResetDisable(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-
-	/* Deassert module soft reset */
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->SoftReset1 ^= ctrl1;
-	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void chipcHw_softResetEnable(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-	uint32_t unhold = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->SoftReset1 |= ctrl1;
-	/* Mask out unhold request bits */
-	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
-
-	/* Process unhold requests */
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
-		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
-	}
-
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
-		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
-	}
-
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
-		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
-	}
-
-	if (unhold) {
-		/* Make sure unhold request is effective */
-		pChipcHw->SoftReset1 &= ~unhold;
-	}
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Configures misc CHIP functionality
-*
-*  Configures CHIP functionality
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_miscControl(uint32_t mask)
-{
-	reg32_write(&pChipcHw->MiscCtrl, mask);
-}
-
-static inline void chipcHw_miscControlDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
-}
-
-static inline void chipcHw_miscControlEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set OTP options
-*
-*  Set OTP options
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_OTP_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setOTPOption(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-
-	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
-	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Get sticky bits
-*
-*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getStickyBits(void)
-{
-	return pChipcHw->Sticky;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setStickyBits(uint32_t mask)
-{
-	uint32_t bits = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	if (mask & chipcHw_REG_STICKY_POR_BROM) {
-		bits |= chipcHw_REG_STICKY_POR_BROM;
-	} else {
-		uint32_t sticky;
-		sticky = pChipcHw->Sticky;
-
-		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
-		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
-			bits |= chipcHw_REG_STICKY_BOOT_DONE;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_1;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_2;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_3;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_4;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_5;
-		}
-	}
-	pChipcHw->Sticky = bits;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Clear sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_clearStickyBits(uint32_t mask)
-{
-	uint32_t bits = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	if (mask &
-	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
-	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
-	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
-		uint32_t sticky = pChipcHw->Sticky;
-
-		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
-		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
-			bits = chipcHw_REG_STICKY_BOOT_DONE;
-			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_1;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_2;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_3;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_4;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_5;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
-		}
-	}
-	pChipcHw->Sticky = bits | mask;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Get software strap value
-*
-*  Retrieves software strap value
-*
-*  @return   Software strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getSoftStraps(void)
-{
-	return pChipcHw->SoftStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set software override strap options
-*
-*  set software override strap options
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
-{
-	reg32_write(&pChipcHw->SoftStraps, strapOptions);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Pin Strap Options
-*
-*  This function returns the raw boot strap options
-*
-*  @return  strap options
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getPinStraps(void)
-{
-	return pChipcHw->PinStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Valid Strap Options
-*
-*  This function returns the valid raw boot strap options
-*
-*  @return  strap options
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getValidStraps(void)
-{
-	uint32_t softStraps;
-
-	/*
-	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
-	 ** which copies HW straps to soft straps if there is no override
-	 */
-	softStraps = chipcHw_getSoftStraps();
-
-	return softStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Initialize valid pin strap options
-*
-*  Retrieves valid pin strap options by copying HW strap options to soft register
-*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_initValidStraps(void)
-{
-	uint32_t softStraps;
-
-	REG_LOCAL_IRQ_SAVE;
-	softStraps = chipcHw_getSoftStraps();
-
-	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
-		/* Copy HW straps to software straps */
-		chipcHw_setSoftStraps(chipcHw_getPinStraps());
-	}
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get boot device
-*
-*  This function returns the device type used in booting the system
-*
-*  @return  Boot device of type chipcHw_BOOT_DEVICE
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get boot mode
-*
-*  This function returns the way the system was booted
-*
-*  @return  Boot mode of type chipcHw_BOOT_MODE
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash page size
-*
-*  This function returns the NAND device page size
-*
-*  @return  Boot NAND device page size
-*
-*/
-/****************************************************************************/
-static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash address cycle configuration
-*
-*  This function returns the NAND flash address cycle configuration
-*
-*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
-*
-*/
-/****************************************************************************/
-static inline int chipcHw_getNandExtraCycle(void)
-{
-	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Activates PIF interface
-*
-*  This function activates PIF interface by taking control of LCD pins
-*
-*  @note
-*       When activated, LCD pins will be defined as follows for PIF operation
-*
-*       CLD[17:0]  = pif_data[17:0]
-*       CLD[23:18] = pif_address[5:0]
-*       CLPOWER    = pif_wr_str
-*       CLCP       = pif_rd_str
-*       CLAC       = pif_hat1
-*       CLFP       = pif_hrdy1
-*       CLLP       = pif_hat2
-*       GPIO[42]   = pif_hrdy2
-*
-*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_activatePifInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Activates LCD interface
-*
-*  This function activates LCD interface
-*
-*  @note
-*       When activated, LCD pins will be defined as follows
-*
-*       CLD[17:0]  = LCD data
-*       CLD[23:18] = LCD data
-*       CLPOWER    = LCD power
-*       CLCP       =
-*       CLAC       = LCD ack
-*       CLFP       =
-*       CLLP       =
-*/
-/****************************************************************************/
-static inline void chipcHw_activateLcdInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Deactivates PIF/LCD interface
-*
-*  This function deactivates PIF/LCD interface
-*
-*  @note
-*       When deactivated LCD pins will be in rti-stated
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_deactivatePifLcdInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, 0);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Select GE2
-*
-*  This function select GE2 as the graphic engine
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_selectGE2(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Select GE3
-*
-*  This function select GE3 as the graphic engine
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_selectGE3(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get to know the configuration of GPIO pin
-*
-*/
-/****************************************************************************/
-static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
-{
-	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
-		(chipcHw_REG_GPIO_MUX_MASK <<
-		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
-	    chipcHw_REG_GPIO_MUX_POSITION(pin);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configure GPIO pin function
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setGpioPinFunction(int pin,
-					      chipcHw_GPIO_FUNCTION_e func)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
-	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
-	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin slew rate
-*
-*  This function sets the slew of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinSlewRate(uint32_t pin,
-					  chipcHw_PIN_SLEW_RATE_e slewRate)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
-	    ~(chipcHw_REG_SLEW_RATE_MASK <<
-	      chipcHw_REG_SLEW_RATE_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
-	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin output drive current
-*
-*  This function sets output drive current of individual pin
-*
-*  Note: Avoid the use of the word 'current' since linux headers define this
-*        to be the current task.
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
-					       chipcHw_PIN_CURRENT_STRENGTH_e
-					       curr)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
-	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
-	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin pullup register
-*
-*  This function sets pullup register of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
-	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
-	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin input type
-*
-*  This function sets input type of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinInputType(uint32_t pin,
-					   chipcHw_PIN_INPUTTYPE_e inputType)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
-	    ~(chipcHw_REG_INPUTTYPE_MASK <<
-	      chipcHw_REG_INPUTTYPE_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
-	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Power up the USB PHY
-*
-*  This function powers up the USB PHY
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_powerUpUsbPhy(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl,
-			 chipcHw_REG_MISC_CTRL_USB_POWERON);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Power down the USB PHY
-*
-*  This function powers down the USB PHY
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_powerDownUsbPhy(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl,
-			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set the 2nd USB as host
-*
-*  This function sets the 2nd USB as host
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setUsbHost(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl,
-			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set the 2nd USB as device
-*
-*  This function sets the 2nd USB as device
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setUsbDevice(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl,
-			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Lower layer function to enable/disable a clock of a certain device
-*
-*  This function enables/disables a core clock
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
-				    chipcHw_OPTYPE_e type, int mode)
-{
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		pPLLReg = &pChipcHw->DDRClock;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		break;
-	case chipcHw_CLOCK_VPM:
-		pPLLReg = &pChipcHw->VPMClock;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		switch (type) {
-		case chipcHw_OPTYPE_OUTPUT:
-			/* PLL clock output enable/disable */
-			if (mode) {
-				if (clock == chipcHw_CLOCK_DDR) {
-					/* DDR clock enable is inverted */
-					reg32_modify_and(pPLLReg,
-							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				} else {
-					reg32_modify_or(pPLLReg,
-							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				}
-			} else {
-				if (clock == chipcHw_CLOCK_DDR) {
-					/* DDR clock disable is inverted */
-					reg32_modify_or(pPLLReg,
-							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				} else {
-					reg32_modify_and(pPLLReg,
-							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				}
-			}
-			break;
-		case chipcHw_OPTYPE_BYPASS:
-			/* PLL clock bypass enable/disable */
-			if (mode) {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-			} else {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-			}
-			break;
-		}
-	} else if (pClockCtrl) {
-		switch (type) {
-		case chipcHw_OPTYPE_OUTPUT:
-			if (mode) {
-				reg32_modify_or(pClockCtrl,
-						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
-			} else {
-				reg32_modify_and(pClockCtrl,
-						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
-			}
-			break;
-		case chipcHw_OPTYPE_BYPASS:
-			if (mode) {
-				reg32_modify_or(pClockCtrl,
-						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-			} else {
-				reg32_modify_and(pClockCtrl,
-						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-			}
-			break;
-		}
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables a core clock of a certain device
-*
-*  This function disables a core clock
-*
-*  @note    no change in power consumption
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
-{
-
-	/* Disable output of the clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable a core clock of a certain device
-*
-*  This function enables a core clock
-*
-*  @note    no change in power consumption
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
-{
-
-	/* Enable output of the clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables bypass clock of a certain device
-*
-*  This function enables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
-{
-	/* Enable bypass clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disabled bypass clock of a certain device
-*
-*  This function disables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
-{
-	/* Disable bypass clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
-
-}
-
-/****************************************************************************/
-/**  @brief Checks if software strap is enabled
- *
- *   @return 1 : When enable
- *           0 : When disable
- */
-/****************************************************************************/
-static inline int chipcHw_isSoftwareStrapsEnable(void)
-{
-	return pChipcHw->SoftStraps & 0x00000001;
-}
-
-/****************************************************************************/
-/**  @brief Enable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsEnable(void)
-{
-	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
-}
-
-/****************************************************************************/
-/**  @brief Disable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsDisable(void)
-{
-	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
-}
-
-/****************************************************************************/
-/**  @brief PLL test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestEnable(void)
-{
-	reg32_modify_or(&pChipcHw->PLLConfig,
-			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestEnable(void)
-{
-	reg32_modify_or(&pChipcHw->PLLConfig2,
-			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestDisable(void)
-{
-	reg32_modify_and(&pChipcHw->PLLConfig,
-			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestDisable(void)
-{
-	reg32_modify_and(&pChipcHw->PLLConfig2,
-			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief Get PLL test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPllTestEnable(void)
-{
-	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
-}
-
-/****************************************************************************/
-/**  @brief Get PLL2 test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPll2TestEnable(void)
-{
-	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
-}
-
-/****************************************************************************/
-/**  @brief PLL test select
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestSelect(uint32_t val)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
-	pChipcHw->PLLConfig |=
-	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test select
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestSelect(uint32_t val)
-{
-
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
-	pChipcHw->PLLConfig2 |=
-	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**  @brief Get PLL test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPllTestSelected(void)
-{
-	return (uint8_t) ((pChipcHw->
-			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
-			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
-}
-
-/****************************************************************************/
-/**  @brief Get PLL2 test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPll2TestSelected(void)
-{
-	return (uint8_t) ((pChipcHw->
-			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
-			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
-}
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL1
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll1Disable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL2
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll2Disable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM SW phase alignment interrupt mode
-*
-*  This function sets VPM phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void
-chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
-{
-	REG_LOCAL_IRQ_SAVE;
-	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
-		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
-	} else {
-		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
-	}
-	pChipcHw->VPMPhaseCtrl2 =
-	    (pChipcHw->
-	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
-			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set DDR phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
-{
-	uint32_t ge = 0;
-	uint32_t le = 0;
-
-	switch (margin) {
-	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
-		ge = 0x0F;
-		le = 0x0F;
-		break;
-	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
-		ge = 0x03;
-		le = 0x3F;
-		break;
-	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
-		ge = 0x01;
-		le = 0x7F;
-		break;
-	}
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->DDRPhaseCtrl1 &=
-		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
-		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
-		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
-			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
-
-		pChipcHw->DDRPhaseCtrl1 |=
-		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
-		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
-{
-	uint32_t ge = 0;
-	uint32_t le = 0;
-
-	switch (margin) {
-	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
-		ge = 0x0F;
-		le = 0x0F;
-		break;
-	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
-		ge = 0x03;
-		le = 0x3F;
-		break;
-	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
-		ge = 0x01;
-		le = 0x7F;
-		break;
-	}
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->VPMPhaseCtrl1 &=
-		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
-		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
-		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
-			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
-
-		pChipcHw->VPMPhaseCtrl1 |=
-		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
-		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Checks DDR phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Checks VPM phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
-	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
-	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrPhaseControl(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
-	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmPhaseControl(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
-	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a DDR phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl2 &=
-	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
-	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
-	pChipcHw->DDRPhaseCtrl2 |=
-	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
-	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a VPM phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl2 &=
-	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
-	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
-	pChipcHw->VPMPhaseCtrl2 |=
-	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
-	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clear DDR phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	/* Clear timeout interrupt service bit */
-	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
-	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clear VPM phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	/* Clear timeout interrupt service bit */
-	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
-	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
-	/* Enable timeout interrupt */
-	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
-	/* Enable timeout interrupt */
-	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
deleted file mode 100644
index b162448f613c..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
+++ /dev/null
@@ -1,530 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_reg.h
-*
-*  @brief   Definitions for low level chip control registers
-*
-*/
-/****************************************************************************/
-#ifndef CHIPCHW_REG_H
-#define CHIPCHW_REG_H
-
-#include <mach/csp/mm_io.h>
-#include <csp/reg.h>
-#include <mach/csp/ddrcReg.h>
-
-#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
-
-typedef struct {
-	uint32_t ChipId;	/* Chip ID */
-	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
-	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
-	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
-	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
-	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
-	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
-	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
-	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
-	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
-	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
-
-	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
-	uint32_t OTPClock;	/* OTP Clock  (Divider) */
-	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
-	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
-	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
-	uint32_t pad1;
-	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
-	uint32_t TSCClock;	/* TSC Clock (Divider) */
-	uint32_t LEDClock;	/* LED Clock (Divider) */
-
-	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
-	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
-	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
-
-	uint32_t BusIntfClock;	/* Bus interface clock */
-
-	uint32_t PLLStatus;	/* PLL status register (PLL1) */
-	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
-	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
-	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
-	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
-	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
-
-	uint32_t I2S1Clock;	/* I2S1 Clock  */
-	uint32_t AudioEnable;	/* Enable/ disable audio channel */
-	uint32_t SoftReset1;	/* Reset blocks */
-	uint32_t SoftReset2;	/* Reset blocks */
-	uint32_t Spare1;	/* Phase align interrupts */
-	uint32_t Sticky;	/* Sticky bits */
-	uint32_t MiscCtrl;	/* Misc. control */
-	uint32_t pad3[3];
-
-	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
-	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
-	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
-	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
-	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
-	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
-
-	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
-	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
-	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
-	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
-	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
-	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
-	uint32_t pad4[9];
-
-	uint32_t SoftOTP1;	/* Software OTP control */
-	uint32_t SoftOTP2;	/* Software OTP control */
-	uint32_t SoftStraps;	/* Software strap */
-	uint32_t PinStraps;	/* Pin Straps */
-	uint32_t DiffOscCtrl;	/* Diff oscillator control */
-	uint32_t DiagsCtrl;	/* Diagnostic control */
-	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
-	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
-
-	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
-
-	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
-	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
-	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
-	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
-	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
-	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
-	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
-	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
-
-	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
-	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
-	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
-	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
-	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
-	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
-	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
-	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
-	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
-	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
-
-	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
-	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
-	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
-	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
-	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
-
-	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
-	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
-	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
-} chipcHw_REG_t;
-
-#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
-#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
-
-#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
-#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
-#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
-#define chipcHw_REG_REV_A0                              0xA00
-#define chipcHw_REG_REV_B0                              0x0B0
-
-#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
-#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
-#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
-#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
-#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
-#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
-#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
-#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
-#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
-#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
-#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
-#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
-#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
-
-#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
-#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
-#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
-#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
-#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
-#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
-#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
-#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
-#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
-#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
-#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
-
-									   00000000 = divide-by-256
-									   00000001 = divide-by-1
-									   00000010 = divide-by-2
-									   00000011 = divide-by-3
-									   00000100 = divide-by-4
-									   00000101 = divide-by-5
-									   00000110 = divide-by-6
-									   .
-									   .
-									   11111011 = divide-by-251
-									   11111100 = divide-by-252
-									   11111101 = divide-by-253
-									   11111110 = divide-by-254
-									 */
-
-#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
-#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
-#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
-#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
-#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
-
-#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
-#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
-#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
-
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
-#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
-#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
-
-#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
-#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
-
-#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
-
-#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
-								   chipcHw_REG_PLL_DIVIDER_FRAC
-								   = 0, when SS is disable
-								 */
-
-#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
-
-#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
-
-/* System booting strap options */
-#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
-
-#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
-
-/* System boot option */
-#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
-#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
-#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
-
-/* NAND Flash page size strap options */
-#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
-#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
-
-#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
-#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
-
-/* Secure boot mode strap options */
-#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
-#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
-#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
-#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
-#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
-
-/* Slave Mode straps */
-#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
-#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
-
-/* Strap pin options */
-#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
-
-/* PIF/LCD pin sharing defines */
-#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
-#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
-
-#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
-
-/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
-#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
-#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
-#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
-#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
-#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
-#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
-#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
-#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
-#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
-#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
-#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
-#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
-#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
-#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
-#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
-#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
-#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
-
-#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
-#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
-							/* Pins beyond 42 are defined by skipping 8 bits within the register */
-#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
-#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
-#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
-
-#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
-#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
-							/* Pins beyond 42 are defined by skipping 8 bits */
-#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
-#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
-
-#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
-#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
-#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
-#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
-							/* Pins beyond 42 are defined by skipping 4 bits */
-#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
-#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
-
-#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
-#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
-#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
-							/* Pins beyond 42 are defined by skipping 2 bits */
-#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
-#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
-
-/* Device connected to the bus clock */
-#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
-#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
-#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
-#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
-#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
-#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
-#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
-#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
-#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
-#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
-#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
-#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
-#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
-#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
-#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
-#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
-#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
-#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
-#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
-#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
-#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
-#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
-#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
-#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
-#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
-#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
-#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
-#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
-#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
-#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
-#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
-#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
-
-/* Software resets defines */
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
-#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
-#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
-#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
-#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
-#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
-#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
-#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
-#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
-#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
-#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
-#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
-#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
-#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
-#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
-#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
-#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
-#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
-#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
-#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
-#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
-#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
-#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
-#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
-#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
-#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
-#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
-#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
-#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
-#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
-#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
-#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
-#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
-#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
-#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
-#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
-#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
-#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
-#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
-#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
-#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
-#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
-#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
-#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
-
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
-#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
-#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
-#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
-
-/* Audio channel control defines */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
-
-/* Misc. chip control defines */
-#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
-#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
-#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
-#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
-#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
-#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
-#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
-#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
-#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
-#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
-#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
-#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
-
-/* OTP configuration defines */
-#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
-#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
-#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
-#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
-#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
-#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
-#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
-#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
-#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
-#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
-#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
-#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
-#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
-#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
-#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
-#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
-#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
-#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
-#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
-#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
-#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
-#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
-#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
-
-/* Sticky bit defines */
-#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
-#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
-#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
-#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
-#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
-#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
-#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
-#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
-#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
-#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
-#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
-#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
-#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
-
-							/* HW phase alignment defines *//* Spare1 register definitions */
-#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
-#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
-#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
-#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
-							/* DDRPhaseCtrl1 register definitions */
-#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
-#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
-#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
-#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
-#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
-							/* VPMPhaseCtrl1 register definitions */
-#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
-#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
-#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
-#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
-#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
-							/* PhaseAlignStatus register definitions */
-#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
-#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
-#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
-#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
-#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
-#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
-#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
-#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
-#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
-#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
-#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
-#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
-#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
-#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
-							/* DDRPhaseCtrl2 register definitions */
-#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
-#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
-#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
-#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
-#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
-#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
-#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
-#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
-							/* VPMPhaseCtrl2 register definitions */
-#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
-#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
-#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
-#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
-#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
-#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
-#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
-#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
-#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
-#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
-#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
-
-#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
deleted file mode 100644
index f1b68e26fa6d..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
+++ /dev/null
@@ -1,872 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    ddrcReg.h
-*
-*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
-*
-*/
-/****************************************************************************/
-
-#ifndef DDRC_REG_H
-#define DDRC_REG_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/reg.h>
-#include <csp/stdint.h>
-
-#include <mach/csp/mm_io.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-/*********************************************************************/
-/* DDR2 Controller (ARM PL341) register definitions */
-/*********************************************************************/
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 DDR2 configuration registers, offset 0x000 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-	typedef struct {
-		uint32_t memcStatus;
-		uint32_t memcCmd;
-		uint32_t directCmd;
-		uint32_t memoryCfg;
-		uint32_t refreshPrd;
-		uint32_t casLatency;
-		uint32_t writeLatency;
-		uint32_t tMrd;
-		uint32_t tRas;
-		uint32_t tRc;
-		uint32_t tRcd;
-		uint32_t tRfc;
-		uint32_t tRp;
-		uint32_t tRrd;
-		uint32_t tWr;
-		uint32_t tWtr;
-		uint32_t tXp;
-		uint32_t tXsr;
-		uint32_t tEsr;
-		uint32_t memoryCfg2;
-		uint32_t memoryCfg3;
-		uint32_t tFaw;
-	} ddrcReg_CTLR_MEMC_REG_t;
-
-#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
-#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
-
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
-
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
-
-#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
-#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
-
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
-
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
-#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
-
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
-
-#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
-#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
-
-#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
-#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
-
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
-
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
-
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
-
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
-
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
-
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
-#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
-#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
-#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_MRD_SHIFT                        0
-#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RAS_SHIFT                        0
-#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RC_SHIFT                         0
-#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RCD_SHIFT                        0
-#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RFC_SHIFT                        0
-#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
-#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RP_SHIFT                         0
-#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RRD_SHIFT                        0
-#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_WR_SHIFT                         0
-#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_WTR_SHIFT                        0
-#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_XP_SHIFT                         0
-#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_XSR_SHIFT                        0
-#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_ESR_SHIFT                        0
-#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
-#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
-#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
-#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_QOS_CNT                            16
-#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
-
-	typedef struct {
-		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
-	} ddrcReg_CTLR_QOS_REG_t;
-
-#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
-#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
-#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
-
-#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
-#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
-
-#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 Memory chip configuration registers, offset 0x200 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_CHIP_CNT                           4
-#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
-
-	typedef struct {
-		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
-	} ddrcReg_CTLR_CHIP_REG_t;
-
-#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
-#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
-
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
-
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 User configuration registers, offset 0x300 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
-
-	typedef struct {
-		uint32_t input;
-		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
-		uint32_t feature;
-	} ddrcReg_CTLR_USER_REG_t;
-
-#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
-#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
-#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
-#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
-
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
-#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
-
-/*********************************************************************/
-/* Broadcom DDR23 PHY register definitions */
-/*********************************************************************/
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* Broadcom DDR23 PHY Address and Control register definitions */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-	typedef struct {
-		uint32_t revision;
-		uint32_t pmCtl;
-		 REG32_RSVD(0x0008, 0x0010);
-		uint32_t pllStatus;
-		uint32_t pllCfg;
-		uint32_t pllPreDiv;
-		uint32_t pllDiv;
-		uint32_t pllCtl1;
-		uint32_t pllCtl2;
-		uint32_t ssCtl;
-		uint32_t ssCfg;
-		uint32_t vdlStatic;
-		uint32_t vdlDynamic;
-		uint32_t padIdle;
-		uint32_t pvtComp;
-		uint32_t padDrive;
-		uint32_t clkRgltrCtl;
-	} ddrcReg_PHY_ADDR_CTL_REG_t;
-
-#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
-#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
-
-/* @todo These SS definitions are duplicates of ones below */
-
-#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
-#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
-#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
-#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
-#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
-#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
-
-/* ----------------------------------------------------- */
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* Broadcom DDR23 PHY Byte Lane register definitions */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_CNT                       2
-#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
-
-	typedef struct {
-		uint32_t revision;
-		uint32_t vdlCalibrate;
-		uint32_t vdlStatus;
-		 REG32_RSVD(0x000c, 0x0010);
-		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
-		uint32_t readCtl;
-		uint32_t readStatus;
-		uint32_t readClear;
-		uint32_t padIdleCtl;
-		uint32_t padDriveCtl;
-		uint32_t padClkCtl;
-		uint32_t writeCtl;
-		uint32_t clkRegCtl;
-	} ddrcReg_PHY_BYTE_LANE_REG_t;
-
-/* There are 2 instances of the byte Lane registers, one for each byte lane. */
-#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
-#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
-
-#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
-#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
-
-/* ----------------------------------------------------- */
-
-/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
-/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
-/* register. The fine rise and fall are no longer used, so add some definitions for just */
-/* the step setting to simplify things. */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
-#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
-
-/*********************************************************************/
-/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
-/*********************************************************************/
-
-	typedef struct {
-		uint32_t cfg;
-		uint32_t actMonCnt;
-		uint32_t ctl;
-		uint32_t lbistCtl;
-		uint32_t lbistSeed;
-		uint32_t lbistStatus;
-		uint32_t tieOff;
-		uint32_t actMonClear;
-		uint32_t status;
-		uint32_t user;
-	} ddrcReg_CTLR_PHY_GLUE_REG_t;
-
-#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
-#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
-
-/* ----------------------------------------------------- */
-
-/* DDR2 / AXI block phase alignment interrupt control */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
-
-/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
-/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
-/* controller. If 2 chips selects are being used, then software control must be enabled. */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
-
-/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
-
-/* Chip select count */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
-#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
-
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#ifdef __cplusplus
-}				/* end extern "C" */
-#endif
-#endif				/* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
deleted file mode 100644
index d67e2f8c22de..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_priv.h
-*
-*  @brief   Private Definitions for low level DMA driver
-*
-*/
-/****************************************************************************/
-
-#ifndef _DMACHW_PRIV_H
-#define _DMACHW_PRIV_H
-
-#include <csp/stdint.h>
-
-/* Data type for DMA Link List Item */
-typedef struct {
-	uint32_t sar;		/* Source Address Register.
-				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
-	uint32_t dar;		/* Destination Address Register.
-				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
-	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
-				   Address MUST be aligned to a 32-bit boundary.             */
-	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
-	uint32_t sstat;		/* Source Status Register */
-	uint32_t dstat;		/* Destination Status Register */
-	uint32_t devCtl;	/* Device specific control information */
-	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
-} dmacHw_DESC_t;
-
-/*
- *  Descriptor ring pointers
- */
-typedef struct {
-	int num;		/* Number of link items */
-	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
-	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
-	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
-	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
-	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
-	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
-} dmacHw_DESC_RING_t;
-
-/*
- *  DMA channel control block
- */
-typedef struct {
-	uint32_t module;	/* DMA controller module (0-1) */
-	uint32_t channel;	/* DMA channel (0-7) */
-	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
-	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
-	void *userData;		/* Channel specifc user data */
-} dmacHw_CBLK_t;
-
-#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
-#define dmacHw_MAX_CHANNEL_COUNT          16
-#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
-#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
-#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
-#define dmacHw_MAX_BLOCKSIZE              4064
-#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
-#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
-#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
-#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
-#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
-#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
-
-/****************************************************************************/
-/**
-*  @brief   Get next available transaction width
-*
-*
-*  @return  On success  : Next available transaction width
-*           On failure : dmacHw_TRANSACTION_WIDTH_8
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
-    ) {
-	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
-		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
-			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
-	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
-		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
-			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
-	}
-
-	/* Default return  */
-	return dmacHw_SRC_TRANSACTION_WIDTH_8;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get number of bytes per transaction
-*
-*  @return  Number of bytes per transaction
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
-    ) {
-	int width = 1;
-	switch (tw) {
-	case dmacHw_SRC_TRANSACTION_WIDTH_8:
-		width = 1;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_16:
-	case dmacHw_DST_TRANSACTION_WIDTH_16:
-		width = 2;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_32:
-	case dmacHw_DST_TRANSACTION_WIDTH_32:
-		width = 4;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_64:
-	case dmacHw_DST_TRANSACTION_WIDTH_64:
-		width = 8;
-		break;
-	default:
-		dmacHw_ASSERT(0);
-	}
-
-	/* Default transaction width */
-	return width;
-}
-
-#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
deleted file mode 100644
index f1ecf96f2da5..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ /dev/null
@@ -1,406 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_reg.h
-*
-*  @brief   Definitions for low level DMA registers
-*
-*/
-/****************************************************************************/
-
-#ifndef _DMACHW_REG_H
-#define _DMACHW_REG_H
-
-#include <csp/stdint.h>
-#include <mach/csp/mm_io.h>
-
-/* Data type for 64 bit little endian register */
-typedef struct {
-	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
-	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
-} dmacHw_REG64_t;
-
-/* Data type representing DMA channel registers */
-typedef struct {
-	dmacHw_REG64_t ChannelSar;	/*  Source Address Register. 64 bits (upper 32 bits are reserved)
-					   Address must be aligned to CTLx.SRC_TR_WIDTH.
-					 */
-	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
-					   Address must be aligned to CTLx.DST_TR_WIDTH.
-					 */
-	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
-					   LLP contains the pointer to the next LLI for block chaining using linked lists.
-					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
-					   Address MUST be aligned to a 32-bit boundary.
-					 */
-	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
-	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
-	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
-	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
-	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
-	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
-	dmacHw_REG64_t SrcGather;	/* Source gather register */
-	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
-} dmacHw_CH_REG_t;
-
-/* Data type for RAW interrupt status registers */
-typedef struct {
-	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
-	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
-	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
-	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
-	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
-} dmacHw_INT_RAW_t;
-
-/* Data type for interrupt status registers */
-typedef struct {
-	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
-	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
-	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
-	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
-	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
-} dmacHw_INT_STATUS_t;
-
-/* Data type for interrupt mask registers*/
-typedef struct {
-	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
-	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
-	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
-	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
-	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
-} dmacHw_INT_MASK_t;
-
-/* Data type for interrupt clear registers */
-typedef struct {
-	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
-	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
-	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
-	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
-	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
-	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
-} dmacHw_INT_CLEAR_t;
-
-/* Data type for software handshaking registers */
-typedef struct {
-	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
-	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
-	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
-	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
-	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
-	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
-} dmacHw_SW_HANDSHAKE_t;
-
-/* Data type for misc. registers */
-typedef struct {
-	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
-	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
-	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
-	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
-	dmacHw_REG64_t Reserved0;	/* Reserved */
-	dmacHw_REG64_t Reserved1;	/* Reserved */
-	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
-	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
-	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
-	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
-	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
-	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
-	dmacHw_REG64_t CompId;	/* Compoent ID */
-} dmacHw_MISC_t;
-
-/* Base registers */
-#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
-#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
-
-extern uint32_t dmaChannelCount_0;
-extern uint32_t dmaChannelCount_1;
-
-/* Define channel specific registers */
-#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
-
-/* Raw interrupt status registers */
-#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
-#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
-#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
-#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
-#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
-#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
-
-/* Interrupt status registers */
-#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
-#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
-#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
-#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
-#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
-#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
-
-/* Interrupt status registers */
-#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
-#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
-#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
-#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
-#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
-#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
-
-/* Interrupt clear registers */
-#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
-#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
-#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
-#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
-#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
-#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
-#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
-
-/* Software handshaking registers */
-#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
-#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
-
-/* Miscellaneous registers */
-#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
-#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
-#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
-#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
-#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
-#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
-#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
-#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
-#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
-#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
-#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
-#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
-#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
-#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
-#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
-
-/* Channel control registers */
-#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
-#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
-#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
-
-#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
-#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
-
-#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
-#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
-#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
-#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
-
-#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
-#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
-
-#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
-#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
-
-#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
-#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
-
-#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
-#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
-
-/* Bit mask for REG_DMACx_CTL_LO */
-
-#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
-
-#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
-#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
-
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
-
-#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
-#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
-
-#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
-#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
-#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
-#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
-
-#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
-#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
-#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
-#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
-
-#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
-#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
-#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
-#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
-#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
-
-#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
-#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
-#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
-#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
-#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
-
-#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
-#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
-
-#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
-#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
-#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
-
-#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
-#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
-#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
-
-#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
-#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
-
-/* Bit mask for REG_DMACx_CTL_HI */
-#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
-#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
-
-/* Bit mask for REG_DMACx_CFG_LO */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
-
-#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
-#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
-#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
-#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
-
-#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
-#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
-#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
-#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
-#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
-
-#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
-
-#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
-#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
-
-#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
-
-#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
-#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
-
-/* Bit mask for REG_DMACx_CFG_HI */
-#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
-#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
-
-#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
-
-#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
-#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
-
-#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
-#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
-
-/* DMA Configuration Parameters */
-#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
-#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
-#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
-#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
-
-/* Define GET/SET macros to program the registers */
-#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
-
-#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
-#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
-
-#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
-
-#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
-#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
-#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
-
-#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
-#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
-#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
-
-#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
-#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
-
-#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
-#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
-#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
-#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
-#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
-#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
-
-#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
-#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
-#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
-#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
-#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
-#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
-#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
-
-#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
-#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
-
-#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-
-#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
-
-#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
-#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
-#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
-
-#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
-#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
-#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
-#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
-
-#endif /* _DMACHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
deleted file mode 100644
index cfa91bed9d34..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_HW_CFG_H
-#define CSP_HW_CFG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <cfg_global.h>
-#include <mach/csp/cap_inline.h>
-
-#if defined(__KERNEL__)
-#include <mach/memory_settings.h>
-#else
-#include <hw_cfg.h>
-#endif
-
-/* Some items that can be defined externally, but will be set to default values */
-/* if they are not defined. */
-/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
-/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
-/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
-/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
-/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
-/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
-/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
-
-#if defined(CFG_GLOBAL_CHIP)
-  #if (CFG_GLOBAL_CHIP == FPGA11107)
-     #define HW_CFG_BUS_CLK_HZ            5000000
-     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
-     #define HW_CFG_DDR_PHY_OMIT
-     #define HW_CFG_UART_CLK_HZ           7500000
-  #else
-     #define HW_CFG_PLL_VCO_HZ           2000000000
-     #define HW_CFG_PLL2_VCO_HZ          1800000000
-     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
-     #define HW_CFG_BUS_CLK_HZ            166666666
-     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
-     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
-     #define HW_CFG_UART_CLK_HZ           142857142
-     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
-  #endif
-#else
-   #define HW_CFG_PLL_VCO_HZ           1800000000
-   #define HW_CFG_PLL2_VCO_HZ          1800000000
-   #define HW_CFG_ARM_CLK_HZ            450000000
-   #define HW_CFG_BUS_CLK_HZ            150000000
-   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
-   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
-   #define HW_CFG_UART_CLK_HZ           150000000
-   #define HW_CFG_VPM_CLK_HZ            300000000
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_HW_CFG_H */
-
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
deleted file mode 100644
index 0aeb6a6fe7f8..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    intcHw_reg.h
-*
-*  @brief   platform specific interrupt controller bit assignments
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_REG_H
-#define _INTCHW_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/reg.h>
-#include <mach/csp/mm_io.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
-#define INTCHW_NUM_INTC           3
-
-/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
-#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
-#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
-#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
-
-/* INTC0 - interrupt controller 0 */
-#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
-#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
-#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
-#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
-#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
-#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
-#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
-#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
-#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
-#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
-#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
-#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
-#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
-#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
-#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
-#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
-#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
-#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
-#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
-#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
-#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
-#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
-#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
-#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
-#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
-#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
-#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
-#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
-#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
-#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
-#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
-#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
-
-#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
-#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
-#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
-#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
-#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
-#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
-#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
-#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
-#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
-#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
-#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
-#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
-#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
-#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
-#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
-#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
-#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
-#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
-#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
-#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
-#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
-#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
-#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
-#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
-#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
-#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
-#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
-#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
-#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
-#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
-#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
-#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
-
-/* INTC1 - interrupt controller 1 */
-#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interrupt (For A0 only)) */
-#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
-#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
-/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
-#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
-#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
-#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
-#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
-#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
-#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
-#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
-#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
-#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
-#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
-#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
-
-#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
-#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
-#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
-#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
-#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
-#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
-#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
-#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
-#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
-#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
-#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
-#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
-#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
-
-#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
-#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
-#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
-#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
-#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
-#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
-#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
-#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
-#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
-#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
-#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
-#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
-#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
-#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
-#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
-#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
-#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
-#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
-#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
-#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
-#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
-#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
-#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
-#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
-#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
-#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
-#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
-#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
-#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
-
-/* SINTC secure int controller */
-#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
-#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
-#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
-#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
-#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
-#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
-#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
-#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
-#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
-#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
-#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
-#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
-#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
-#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
-#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
-#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
-
-#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
-#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
-#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
-#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
-#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
-#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
-#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
-#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
-#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
-#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
-#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
-#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
-#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
-#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
-#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
-#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
-
-/* PL192 Vectored Interrupt Controller (VIC) layout */
-#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
-#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
-#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
-#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
-#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
-#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
-#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
-#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
-#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
-#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
-#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
-#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
-#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
-#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
-#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
-#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
-
-/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
-/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
-/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
-/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-/* Clear one or more IRQ interrupts. */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask)
-{
-	__REG32(basep + INTCHW_INTENCLEAR) = mask;
-}
-
-/* Enables one or more IRQ interrupts. */
-static inline void intcHw_irq_enable(void *basep, uint32_t mask)
-{
-	__REG32(basep + INTCHW_INTENABLE) = mask;
-}
-
-#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
deleted file mode 100644
index ad58cf873377..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    mm_addr.h
-*
-*  @brief   Memory Map address definitions
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _MM_ADDR_H
-#define _MM_ADDR_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-/*  Memory Map address definitions */
-
-#define MM_ADDR_DDR                0x00000000
-
-#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
-
-#define MM_ADDR_IO_FLASHC          0x20000000
-#define MM_ADDR_IO_BROM            0x30000000
-#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
-#define MM_ADDR_IO_DMA0            0x30200000
-#define MM_ADDR_IO_DMA1            0x30300000
-#define MM_ADDR_IO_ESW             0x30400000
-#define MM_ADDR_IO_CLCD            0x30500000
-#define MM_ADDR_IO_PIF             0x30580000
-#define MM_ADDR_IO_APM             0x30600000
-#define MM_ADDR_IO_SPUM            0x30700000
-#define MM_ADDR_IO_VPM_PROG        0x30800000
-#define MM_ADDR_IO_VPM_DATA        0x30A00000
-#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
-#define MM_ADDR_IO_CHIPC           0x80000000
-#define MM_ADDR_IO_UMI             0x80001000
-#define MM_ADDR_IO_NAND            0x80001800
-#define MM_ADDR_IO_LEDM            0x80002000
-#define MM_ADDR_IO_PWM             0x80002040
-#define MM_ADDR_IO_VINTC           0x80003000
-#define MM_ADDR_IO_GPIO0           0x80004000
-#define MM_ADDR_IO_GPIO1           0x80004800
-#define MM_ADDR_IO_I2CS            0x80005000
-#define MM_ADDR_IO_SPIS            0x80006000
-#define MM_ADDR_IO_HPM             0x80007400
-#define MM_ADDR_IO_HPM_REMAP       0x80007800
-#define MM_ADDR_IO_TZPC            0x80008000
-#define MM_ADDR_IO_MPU             0x80009000
-#define MM_ADDR_IO_SPUMP           0x8000a000
-#define MM_ADDR_IO_PKA             0x8000b000
-#define MM_ADDR_IO_RNG             0x8000c000
-#define MM_ADDR_IO_KEYC            0x8000d000
-#define MM_ADDR_IO_BBL             0x8000e000
-#define MM_ADDR_IO_OTP             0x8000f000
-#define MM_ADDR_IO_I2S0            0x80010000
-#define MM_ADDR_IO_I2S1            0x80011000
-#define MM_ADDR_IO_UARTA           0x80012000
-#define MM_ADDR_IO_UARTB           0x80013000
-#define MM_ADDR_IO_I2CH            0x80014020
-#define MM_ADDR_IO_SPIH            0x80015000
-#define MM_ADDR_IO_TSC             0x80016000
-#define MM_ADDR_IO_TMR             0x80017000
-#define MM_ADDR_IO_WATCHDOG        0x80017800
-#define MM_ADDR_IO_ETM             0x80018000
-#define MM_ADDR_IO_DDRC            0x80019000
-#define MM_ADDR_IO_SINTC           0x80100000
-#define MM_ADDR_IO_INTC0           0x80200000
-#define MM_ADDR_IO_INTC1           0x80201000
-#define MM_ADDR_IO_GE              0x80300000
-#define MM_ADDR_IO_USB_CTLR0       0x80400000
-#define MM_ADDR_IO_USB_CTLR1       0x80410000
-#define MM_ADDR_IO_USB_PHY         0x80420000
-#define MM_ADDR_IO_SDIOH0          0x80500000
-#define MM_ADDR_IO_SDIOH1          0x80600000
-#define MM_ADDR_IO_VDEC            0x80700000
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
deleted file mode 100644
index de92ec6a01aa..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    mm_io.h
-*
-*  @brief   Memory Map I/O definitions
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _MM_IO_H
-#define _MM_IO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/mm_addr.h>
-
-#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(CONFIG_MMU)
-
-/* This macro is referenced in <mach/io.h>
- * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
- * This macro is referenced in <asm/arch/io.h>
- *
- * Assume VPM address is the last x MB of memory.  For VPM, map to
- * 0xf0000000 and up.
- */
-
-#ifndef MM_IO_PHYS_TO_VIRT
-#ifdef __ASSEMBLY__
-#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
-#else
-#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
-			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
-#endif
-#endif
-
-/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
-
-#ifndef MM_IO_VIRT_TO_PHYS
-#ifdef __ASSEMBLY__
-#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
-#else
-#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
-			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
-#endif
-#endif
-
-#else
-
-#ifndef MM_IO_PHYS_TO_VIRT
-#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
-#endif
-
-#ifndef MM_IO_VIRT_TO_PHYS
-#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
-#endif
-
-#endif
-
-/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
-#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
-#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
-#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
-
-#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
-#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
-
-#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
-#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
-#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
-#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
-#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
-#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
-#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
-#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
-#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
-#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
-#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
-
-#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
-
-#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
-#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
-#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
-#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
-#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
-#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
-#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
-#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
-#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
-#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
-#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
-#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
-#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
-#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
-#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
-#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
-#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
-#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
-#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
-#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
-#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
-#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
-#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
-#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
-#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
-#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
-#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
-#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
-#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
-#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
-#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
-#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
-#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
-#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
-#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
-#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
-#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
-#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
-#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
-
-#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
deleted file mode 100644
index d15f5f3ec2d8..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw_def.h
-*
-*  @brief   Definitions for configuring/testing secure blocks
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef SECHW_DEF_H
-#define SECHW_DEF_H
-
-#include <mach/csp/mm_io.h>
-
-/* Bit mask for various secure device */
-#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
-#define secHw_BLK_MASK_KEY_SCAN         0x00000002
-#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
-#define secHw_BLK_MASK_UART0            0x00000008
-#define secHw_BLK_MASK_UART1            0x00000010
-#define secHw_BLK_MASK_WATCHDOG         0x00000020
-#define secHw_BLK_MASK_SPUM             0x00000040
-#define secHw_BLK_MASK_DDR2             0x00000080
-#define secHw_BLK_MASK_EXT_MEM          0x00000100
-#define secHw_BLK_MASK_ESW              0x00000200
-#define secHw_BLK_MASK_SPU              0x00010000
-#define secHw_BLK_MASK_PKA              0x00020000
-#define secHw_BLK_MASK_RNG              0x00040000
-#define secHw_BLK_MASK_RTC              0x00080000
-#define secHw_BLK_MASK_OTP              0x00100000
-#define secHw_BLK_MASK_BOOT             0x00200000
-#define secHw_BLK_MASK_MPU              0x00400000
-#define secHw_BLK_MASK_TZCTRL           0x00800000
-#define secHw_BLK_MASK_INTR             0x01000000
-
-/* Trustzone register set */
-typedef struct {
-	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
-	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
-	volatile uint32_t setSecure;	/* write only. reads back as 0 */
-} secHw_TZREG_t;
-
-/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
-/* is for the higher 16 bits. */
-
-typedef enum {
-	secHw_IDX_LS = 0,
-	secHw_IDX_MS = 1,
-	secHw_IDX_NUM
-} secHw_IDX_e;
-
-typedef struct {
-	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
-} secHw_REGS_t;
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a non-secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
-*
-*/
-/****************************************************************************/
-static inline uint32_t secHw_getStatus(void);
-
-#include <mach/csp/secHw_inline.h>
-
-#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
deleted file mode 100644
index 9cd6a032ab71..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw_inline.h
-*
-*  @brief   Definitions for configuring/testing secure blocks
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef SECHW_INLINE_H
-#define SECHW_INLINE_H
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    ) {
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	if (mask & 0x0000FFFF) {
-		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
-	}
-
-	if (mask & 0xFFFF0000) {
-		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a non-secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    ) {
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	if (mask & 0x0000FFFF) {
-		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
-	}
-	if (mask & 0xFFFF0000) {
-		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
-*
-*/
-/****************************************************************************/
-static inline uint32_t secHw_getStatus(void)
-{
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	return (regp->reg[1].status << 16) + regp->reg[0].status;
-}
-
-#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
deleted file mode 100644
index 3080ac7239a1..000000000000
--- a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw_reg.h
-*
-*  @brief   Definitions for low level Timer registers
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_REG_H
-#define _TMRHW_REG_H
-
-#include <mach/csp/mm_io.h>
-#include <mach/csp/hw_cfg.h>
-/* Base address */
-#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
-
-/*
-This platform has four different timers running at different clock speed
-
-Timer one   (Timer ID 0) runs at  25 MHz
-Timer two   (Timer ID 1) runs at  25 MHz
-Timer three (Timer ID 2) runs at 150 MHz
-Timer four  (Timer ID 3) runs at 150 MHz
-*/
-#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
-#define tmrHw_LOW_FREQUENCY_HZ          25000000
-
-#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
-#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
-#define tmrHw_HIGH_FREQUENCY_HZ         150000000
-#else
-#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
-#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
-#endif
-
-#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
-#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
-#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
-#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
-
-typedef struct {
-	uint32_t LoadValue;	/* Load value for timer */
-	uint32_t CurrentValue;	/* Current value for timer */
-	uint32_t Control;	/* Control register */
-	uint32_t InterruptClear;	/* Interrupt clear register */
-	uint32_t RawInterruptStatus;	/* Raw interrupt status */
-	uint32_t InterruptStatus;	/* Masked interrupt status */
-	uint32_t BackgroundLoad;	/* Background load value */
-	uint32_t padding;	/* Padding register */
-} tmrHw_REG_t;
-
-/* Control bot masks */
-#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
-#define tmrHw_CONTROL_PERIODIC                0x00000040
-#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
-#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
-#define tmrHw_CONTROL_PRESCALE_1              0x00000000
-#define tmrHw_CONTROL_PRESCALE_16             0x00000004
-#define tmrHw_CONTROL_PRESCALE_256            0x00000008
-#define tmrHw_CONTROL_32BIT                   0x00000002
-#define tmrHw_CONTROL_ONESHOT                 0x00000001
-#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
-
-#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
-
-#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
-
-#endif /* _TMRHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
deleted file mode 100644
index 72543781207b..000000000000
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ /dev/null
@@ -1,630 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma.h
-*
-*   @brief  API definitions for the linux DMA interface.
-*/
-/****************************************************************************/
-
-#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
-#define ASM_ARM_ARCH_BCMRING_DMA_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/kernel.h>
-#include <linux/semaphore.h>
-#include <csp/dmacHw.h>
-#include <mach/timer.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
-/* and line number of the reservation request will be recorded in the channel table */
-
-#define DMA_DEBUG_TRACK_RESERVATION   1
-
-#define DMA_NUM_CONTROLLERS     2
-#define DMA_NUM_CHANNELS        8	/* per controller */
-
-typedef enum {
-	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
-	DMA_DEVICE_I2S0_DEV_TO_MEM,
-	DMA_DEVICE_I2S0_MEM_TO_DEV,
-	DMA_DEVICE_I2S1_DEV_TO_MEM,
-	DMA_DEVICE_I2S1_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
-	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
-	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
-	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
-	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
-	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
-	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
-	DMA_DEVICE_SPUM_DEV_TO_MEM,
-	DMA_DEVICE_SPUM_MEM_TO_DEV,
-	DMA_DEVICE_SPIH_DEV_TO_MEM,
-	DMA_DEVICE_SPIH_MEM_TO_DEV,
-	DMA_DEVICE_UART_A_DEV_TO_MEM,
-	DMA_DEVICE_UART_A_MEM_TO_DEV,
-	DMA_DEVICE_UART_B_DEV_TO_MEM,
-	DMA_DEVICE_UART_B_MEM_TO_DEV,
-	DMA_DEVICE_PIF_MEM_TO_DEV,
-	DMA_DEVICE_PIF_DEV_TO_MEM,
-	DMA_DEVICE_ESW_DEV_TO_MEM,
-	DMA_DEVICE_ESW_MEM_TO_DEV,
-	DMA_DEVICE_VPM_MEM_TO_MEM,
-	DMA_DEVICE_CLCD_MEM_TO_MEM,
-	DMA_DEVICE_NAND_MEM_TO_MEM,
-	DMA_DEVICE_MEM_TO_VRAM,
-	DMA_DEVICE_VRAM_TO_MEM,
-
-	/* Add new entries before this line. */
-
-	DMA_NUM_DEVICE_ENTRIES,
-	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
-
-} DMA_Device_t;
-
-/****************************************************************************
-*
-*   The DMA_Handle_t is the primary object used by callers of the API.
-*
-*****************************************************************************/
-
-#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
-
-typedef int DMA_Handle_t;
-
-/****************************************************************************
-*
-*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
-*   to point to regions of memory.
-*
-*****************************************************************************/
-
-typedef struct {
-	void *virtAddr;		/* Virtual Address of the descriptor ring */
-	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
-	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
-	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
-
-} DMA_DescriptorRing_t;
-
-/****************************************************************************
-*
-*   The DMA_DeviceAttribute_t contains information which describes a
-*   particular DMA device (or peripheral).
-*
-*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
-*   statically initialized.
-*
-*****************************************************************************/
-
-/* The device handler is called whenever a DMA operation completes. The reaon */
-/* for it to be called will be a bitmask with one or more of the following bits */
-/* set. */
-
-#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
-#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
-#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
-
-typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
-				     void *userData);
-
-#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
-#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
-#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
-#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
-#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
-#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
-#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
-#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
-
-/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
-/*       determine which DMA controllers a given device can be used from, and the interface */
-/*       array determeines the actual interface number to use for a given controller. */
-
-typedef struct {
-	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
-	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
-	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
-	const char *name;	/* Will show up in the /proc entry */
-
-	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
-
-	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
-
-	void *userData;		/* Passed to the devHandler */
-	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
-
-	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
-
-	/* The following statistical information will be collected and presented in a proc entry. */
-	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
-	/*       a 64 bit counter. */
-
-	uint64_t numTransfers;	/* Number of DMA transfers performed */
-	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
-	uint64_t transferBytes;	/* Total bytes transferred */
-	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
-	uint32_t numBytes;	/* Last transfer size */
-
-	/* It's not possible to free memory which is allocated for the descriptors from within */
-	/* the ISR. So make the presumption that a given device will tend to use the */
-	/* same sized buffers over and over again, and we keep them around. */
-
-	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
-
-	/* We stash away some of the information from the previous transfer. If back-to-back */
-	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
-	/* the descriptor buffers. */
-
-	uint32_t prevNumBytes;
-	dma_addr_t prevSrcData;
-	dma_addr_t prevDstData;
-
-} DMA_DeviceAttribute_t;
-
-/****************************************************************************
-*
-*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
-*   data structures and don't belong in this header file, but are included
-*   merely for discussion.
-*
-*   By the time this is implemented, these structures will be moved out into
-*   the appropriate C source file instead.
-*
-*****************************************************************************/
-
-/****************************************************************************
-*
-*   The DMA_Channel_t contains state information about each DMA channel. Some
-*   of the channels are dedicated. Non-dedicated channels are shared
-*   amongst the other devices.
-*
-*****************************************************************************/
-
-#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
-#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
-#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
-#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
-
-typedef struct {
-	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
-	DMA_Device_t devType;	/* Device this channel is currently reserved for */
-	DMA_Device_t lastDevType;	/* Device type that used this previously */
-	char name[20];		/* Name passed onto request_irq */
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-	const char *fileName;	/* Place where channel reservation took place */
-	int lineNum;		/* Place where channel reservation took place */
-#endif
-	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
-
-} DMA_Channel_t;
-
-/****************************************************************************
-*
-*   The DMA_Controller_t contains state information about each DMA controller.
-*
-*   The freeChannelQ is stored in the controller data structure rather than
-*   the channel data structure since several of the devices are accessible
-*   from multiple controllers, and there is no way to know which controller
-*   will become available first.
-*
-*****************************************************************************/
-
-typedef struct {
-	DMA_Channel_t channel[DMA_NUM_CHANNELS];
-
-} DMA_Controller_t;
-
-/****************************************************************************
-*
-*   The DMA_Global_t contains all of the global state information used by
-*   the DMA code.
-*
-*   Callers which need to allocate a shared channel will be queued up
-*   on the freeChannelQ until a channel becomes available.
-*
-*****************************************************************************/
-
-typedef struct {
-	struct semaphore lock;	/* acquired when manipulating table entries */
-	wait_queue_head_t freeChannelQ;
-
-	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
-
-} DMA_Global_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-
-extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
-
-/* ---- Function Prototypes ---------------------------------------------- */
-
-#if defined(__KERNEL__)
-
-/****************************************************************************/
-/**
-*   Initializes the DMA module.
-*
-*   @return
-*       0       - Success
-*       < 0     - Error
-*/
-/****************************************************************************/
-
-int dma_init(void);
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
-				     int lineNum);
-#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
-#else
-
-/****************************************************************************/
-/**
-*   Reserves a channel for use with @a dev. If the device is setup to use
-*   a shared channel, then this function will block until a free channel
-*   becomes available.
-*
-*   @return
-*       >= 0    - A valid DMA Handle.
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
-    );
-#endif
-
-/****************************************************************************/
-/**
-*   Frees a previously allocated DMA Handle.
-*
-*   @return
-*        0      - DMA Handle was released successfully.
-*       -EINVAL - Invalid DMA handle
-*/
-/****************************************************************************/
-
-int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
-    );
-
-/****************************************************************************/
-/**
-*   Determines if a given device has been configured as using a shared
-*   channel.
-*
-*   @return boolean
-*       0           Device uses a dedicated channel
-*       non-zero    Device uses a shared channel
-*/
-/****************************************************************************/
-
-int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates memory to hold a descriptor ring. The descriptor ring then
-*   needs to be populated by making one or more calls to
-*   dna_add_descriptors.
-*
-*   The returned descriptor ring will be automatically initialized.
-*
-*   @return
-*       0           Descriptor ring was allocated successfully
-*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
-			      int numDescriptors	/* Number of descriptors that need to be allocated. */
-    );
-
-/****************************************************************************/
-/**
-*   Releases the memory which was previously allocated for a descriptor ring.
-*/
-/****************************************************************************/
-
-void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
-    );
-
-/****************************************************************************/
-/**
-*   Initializes a descriptor ring, so that descriptors can be added to it.
-*   Once a descriptor ring has been allocated, it may be reinitialized for
-*   use with additional/different regions of memory.
-*
-*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
-*   initialize the ring with a smaller number of descriptors. The amount
-*   of memory allocated for the descriptor ring will not be reduced, and
-*   the descriptor ring may be reinitialized later
-*
-*   @return
-*       0           Descriptor ring was initialized successfully
-*       -ENOMEM     The descriptor which was passed in has insufficient space
-*                   to hold the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
-			     int numDescriptors	/* Number of descriptors to initialize. */
-    );
-
-/****************************************************************************/
-/**
-*   Determines the number of descriptors which would be required for a
-*   transfer of the indicated memory region.
-*
-*   This function also needs to know which DMA device this transfer will
-*   be destined for, so that the appropriate DMA configuration can be retrieved.
-*   DMA parameters such as transfer width, and whether this is a memory-to-memory
-*   or memory-to-peripheral, etc can all affect the actual number of descriptors
-*   required.
-*
-*   @return
-*       > 0     Returns the number of descriptors required for the indicated transfer
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
-				   dma_addr_t srcData,	/* Place to get data to write to device */
-				   dma_addr_t dstData,	/* Pointer to device data address */
-				   size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to the descriptor ring. Note that it may take
-*   multiple descriptors for each region of memory. It is the callers
-*   responsibility to allocate a sufficiently large descriptor ring.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
-			DMA_Device_t device,	/* DMA Device that descriptors are for */
-			dma_addr_t srcData,	/* Place to get data (memory or device) */
-			dma_addr_t dstData,	/* Place to put data (memory or device) */
-			size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Sets the descriptor ring associated with a device.
-*
-*   Once set, the descriptor ring will be associated with the device, even
-*   across channel request/free calls. Passing in a NULL descriptor ring
-*   will release any descriptor ring currently associated with the device.
-*
-*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
-*         the descriptor ring may be released and reallocated.
-*
-*   Note: This function will release the descriptor memory for any current
-*         descriptor ring associated with this device.
-*/
-/****************************************************************************/
-
-int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
-    );
-
-/****************************************************************************/
-/**
-*   Retrieves the descriptor ring associated with a device.
-*/
-/****************************************************************************/
-
-int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates buffers for the descriptors. This is normally done automatically
-*   but needs to be done explicitly when initiating a dma from interrupt
-*   context.
-*
-*   @return
-*       0       Descriptors were allocated successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-			  dma_addr_t srcData,	/* Place to get data to write to device */
-			  dma_addr_t dstData,	/* Pointer to device data address */
-			  size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates and sets up descriptors for a double buffered circular buffer.
-*
-*   This is primarily intended to be used for things like the ingress samples
-*   from a microphone.
-*
-*   @return
-*       > 0     Number of descriptors actually allocated.
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-				     dma_addr_t srcData,	/* Physical address of source data */
-				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
-				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
-				     size_t numBytes	/* Number of bytes in each destination buffer */
-    );
-
-/****************************************************************************/
-/**
-*   Initiates a transfer when the descriptors have already been setup.
-*
-*   This is a special case, and normally, the dma_transfer_xxx functions should
-*   be used.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_start_transfer(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Stops a previously started DMA transfer.
-*
-*   @return
-*       0       Transfer was stopped successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_stop_transfer(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Waits for a DMA to complete by polling. This function is only intended
-*   to be used for testing. Interrupts should be used for most DMA operations.
-*/
-/****************************************************************************/
-
-int dma_wait_transfer_done(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Initiates a DMA transfer
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*/
-/****************************************************************************/
-
-int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
-		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-		 dma_addr_t srcData,	/* Place to get data to write to device */
-		 dma_addr_t dstData,	/* Pointer to device data address */
-		 size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Initiates a transfer from memory to a device.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
-					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
-					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
-					 size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Initiates a transfer from a device to memory.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
-					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
-					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
-					   size_t numBytes	/* Number of bytes to retrieve from the device */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Initiates a memory to memory transfer.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
-					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
-					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
-					  size_t numBytes	/* Number of bytes to transfer */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Set the callback function which will be called when a transfer completes.
-*   If a NULL callback function is set, then no callback will occur.
-*
-*   @note   @a devHandler will be called from IRQ context.
-*
-*   @return
-*       0       - Success
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
-			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
-			   void *userData	/* Pointer which will be passed to devHandler. */
-    );
-
-#endif
-
-#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
deleted file mode 100644
index 2f316f0e6e69..000000000000
--- a/arch/arm/mach-bcmring/include/mach/entry-macro.S
+++ /dev/null
@@ -1,76 +0,0 @@
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
- *
- * Low-level IRQ helper macros for BCMRing-based platforms
- *
- */
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(MM_IO_BASE_INTC0)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #IRQ_INTC0_START
-		cmp	\irqstat, #0
-		bne	1001f
-
-		ldr	\base, =(MM_IO_BASE_INTC1)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #IRQ_INTC1_START
-		cmp	\irqstat, #0
-		bne	1001f
-
-		ldr	\base, =(MM_IO_BASE_SINTC)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
-		cmp	\irqstat, #0
-		beq	1002f
-
-		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
deleted file mode 100644
index 6ae20a649a97..000000000000
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *
- *  This file contains the hardware definitions of the BCMRing.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <cfg_global.h>
-#include <mach/csp/mm_io.h>
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START               PHYS_OFFSET
-
-#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
-#define RAM_BASE                PAGE_OFFSET
-
-/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
-/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
-#if defined(__KERNEL__)
-#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
-#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
-#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
-#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
-#else
-#define HW_DECLARE_SPINLOCK(name)
-#define HW_EXTERN_SPINLOCK(name)
-#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
-#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
-#endif
-
-#ifndef HW_IO_PHYS_TO_VIRT
-#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
-#endif
-#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
-
-#endif
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
deleted file mode 100644
index b279b825d4a7..000000000000
--- a/arch/arm/mach-bcmring/include/mach/irqs.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  Copyright (C) 2007 Broadcom
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(ARCH_BCMRING_IRQS_H)
-#define ARCH_BCMRING_IRQS_H
-
-/* INTC0 - interrupt controller 0 */
-#define IRQ_INTC0_START     0
-#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
-#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
-#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
-#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
-#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
-#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
-#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
-#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
-#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
-#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
-#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
-#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
-#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
-#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
-#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
-#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
-#define IRQ_VPM            16	/* Voice process module interrupt */
-#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
-#define IRQ_USBH1          18	/* USB1 host interrupt */
-#define IRQ_USBD           19	/* USB device interrupt */
-#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
-#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
-#define IRQ_TIMER0         22	/* Timer0 interrupt */
-#define IRQ_TIMER1         23	/* Timer1 interrupt */
-#define IRQ_TIMER2         24	/* Timer2 interrupt */
-#define IRQ_TIMER3         25	/* Timer3 interrupt */
-#define IRQ_SPIH           26	/* SPI host interrupt */
-#define IRQ_ESW            27	/* Ethernet switch interrupt */
-#define IRQ_APM            28	/* Audio process module interrupt */
-#define IRQ_GE             29	/* Graphic engine interrupt */
-#define IRQ_CLCD           30	/* LCD Controller interrupt */
-#define IRQ_PIF            31	/* Peripheral interface interrupt */
-#define IRQ_INTC0_END      31
-
-/* INTC1 - interrupt controller 1 */
-#define IRQ_INTC1_START    32
-#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
-#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
-#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
-#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
-#define IRQ_I2CH           36	/*  4 I2C host interrupt */
-#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
-#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
-#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
-#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
-#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
-#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
-#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
-#define IRQ_UARTB          44	/* 12 UARTB */
-#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
-#define IRQ_UARTA          46	/* 14 UARTA */
-#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
-#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
-#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
-#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
-#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
-#define IRQ_RNG            52	/* 20 Random number generator interrupt */
-#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
-#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
-#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
-#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
-#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
-#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
-#define IRQ_INTC1_END      58
-
-/* SINTC secure int controller */
-#define IRQ_SINTC_START    59
-#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
-#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
-#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
-#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
-#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
-#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
-#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
-#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
-#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
-#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
-#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
-#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
-#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
-#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
-#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
-#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
-
-#define IRQ_SINTC_END      74
-
-/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
-/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
-/*       to make the mapping easy for humans to decipher. */
-
-#define IRQ_GPIO_0                  100
-
-#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
-
-/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
-/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
-#define NUM_GPIO_IRQS               62
-
-#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
-
-#define IRQ_UNKNOWN                 -1
-
-/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
-#define IRQ_INTC0_VALID_MASK        0xffffffff
-#define IRQ_INTC1_VALID_MASK        0x07ffffff
-#define IRQ_SINTC_VALID_MASK        0x0000ffff
-
-#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
deleted file mode 100644
index ce5cd16f2ac4..000000000000
--- a/arch/arm/mach-bcmring/include/mach/memory_settings.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef MEMORY_SETTINGS_H
-#define MEMORY_SETTINGS_H
-
-/* ---- Include Files ---------------------------------------- */
-/* ---- Constants and Types ---------------------------------- */
-
-/* Memory devices */
-/* NAND Flash timing for 166 MHz setting */
-#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
-#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
-#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
-#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
-#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
-#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
-
-#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
-	| HW_CFG_NAND_tWP  \
-	| HW_CFG_NAND_tWR  \
-	| HW_CFG_NAND_tAS  \
-	| HW_CFG_NAND_tOE  \
-	| HW_CFG_NAND_tRC)
-
-/* NOR Flash timing for 166 MHz setting */
-#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
-#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
-#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
-#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
-#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
-#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
-#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
-
-#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
-	| HW_CFG_NOR_TBTA      \
-	| HW_CFG_NOR_TWP       \
-	| HW_CFG_NOR_TWR       \
-	| HW_CFG_NOR_TAS       \
-	| HW_CFG_NOR_TOE       \
-	| HW_CFG_NOR_TRC_TLC)
-
-#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
-#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
-
-/* SDRAM Settings */
-/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
-/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
-/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
-/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
-#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
-
-/* ---- Variable Externs ------------------------------------- */
-/* ---- Function Prototypes ---------------------------------- */
-
-#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h
deleted file mode 100644
index 387376ffb56b..000000000000
--- a/arch/arm/mach-bcmring/include/mach/reg_nand.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  REG_NAND.h
-*
-*  PURPOSE:
-*
-*     This file contains definitions for the nand registers:
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(__ASM_ARCH_REG_NAND_H)
-#define __ASM_ARCH_REG_NAND_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <mach/reg_umi.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-#define HW_NAND_BASE       MM_IO_BASE_NAND	/* NAND Flash */
-
-/* DMA accesses by the bootstrap need hard nonvirtual addresses */
-#define REG_NAND_CMD            __REG16(HW_NAND_BASE + 0)
-#define REG_NAND_ADDR           __REG16(HW_NAND_BASE + 4)
-
-#define REG_NAND_PHYS_DATA16   (HW_NAND_BASE + 8)
-#define REG_NAND_PHYS_DATA8    (HW_NAND_BASE + 8)
-#define REG_NAND_DATA16         __REG16(REG_NAND_PHYS_DATA16)
-#define REG_NAND_DATA8          __REG8(REG_NAND_PHYS_DATA8)
-
-/* use appropriate offset to make sure it start at the 1K boundary */
-#define REG_NAND_PHYS_DATA_DMA   (HW_NAND_BASE + 0x400)
-#define REG_NAND_DATA_DMA         __REG32(REG_NAND_PHYS_DATA_DMA)
-
-/* Linux DMA requires physical address of the data register */
-#define REG_NAND_DATA16_PADDR    HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16)
-#define REG_NAND_DATA8_PADDR     HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8)
-#define REG_NAND_DATA_PADDR      HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA)
-
-#define NAND_BUS_16BIT()        (0)
-#define NAND_BUS_8BIT()         (!NAND_BUS_16BIT())
-
-/* Register offsets */
-#define REG_NAND_CMD_OFFSET     (0)
-#define REG_NAND_ADDR_OFFSET    (4)
-#define REG_NAND_DATA8_OFFSET   (8)
-
-#endif
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
deleted file mode 100644
index 0992842caa77..000000000000
--- a/arch/arm/mach-bcmring/include/mach/reg_umi.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  REG_UMI.h
-*
-*  PURPOSE:
-*
-*     This file contains definitions for the nand registers:
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(__ASM_ARCH_REG_UMI_H)
-#define __ASM_ARCH_REG_UMI_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <mach/csp/mm_io.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/* Unified Memory Interface Ctrl Register */
-#define HW_UMI_BASE       MM_IO_BASE_UMI
-
-/* Flash bank 0 timing and control register */
-#define REG_UMI_FLASH0_TCR         __REG32(HW_UMI_BASE  + 0x00)
-/* Flash bank 1 timing and control register */
-#define REG_UMI_FLASH1_TCR         __REG32(HW_UMI_BASE  + 0x04)
-/* Flash bank 2 timing and control register */
-#define REG_UMI_FLASH2_TCR         __REG32(HW_UMI_BASE  + 0x08)
-/* MMD interface and control register */
-#define REG_UMI_MMD_ICR            __REG32(HW_UMI_BASE  + 0x0c)
-/* NAND timing and control register */
-#define REG_UMI_NAND_TCR           __REG32(HW_UMI_BASE  + 0x18)
-/* NAND ready/chip select register */
-#define REG_UMI_NAND_RCSR          __REG32(HW_UMI_BASE  + 0x1c)
-/* NAND ECC control & status register */
-#define REG_UMI_NAND_ECC_CSR       __REG32(HW_UMI_BASE  + 0x20)
-/* NAND ECC data register XXB2B1B0 */
-#define REG_UMI_NAND_ECC_DATA      __REG32(HW_UMI_BASE  + 0x24)
-/* BCH ECC Parameter N */
-#define REG_UMI_BCH_N              __REG32(HW_UMI_BASE  + 0x40)
-/* BCH ECC Parameter T */
-#define REG_UMI_BCH_K              __REG32(HW_UMI_BASE  + 0x44)
-/* BCH ECC Parameter K */
-#define REG_UMI_BCH_T              __REG32(HW_UMI_BASE  + 0x48)
-/* BCH ECC Contro Status */
-#define REG_UMI_BCH_CTRL_STATUS    __REG32(HW_UMI_BASE  + 0x4C)
-/* BCH WR ECC 31:0 */
-#define REG_UMI_BCH_WR_ECC_0       __REG32(HW_UMI_BASE  + 0x50)
-/* BCH WR ECC 63:32 */
-#define REG_UMI_BCH_WR_ECC_1       __REG32(HW_UMI_BASE  + 0x54)
-/* BCH WR ECC 95:64 */
-#define REG_UMI_BCH_WR_ECC_2       __REG32(HW_UMI_BASE  + 0x58)
-/* BCH WR ECC 127:96 */
-#define REG_UMI_BCH_WR_ECC_3       __REG32(HW_UMI_BASE  + 0x5c)
-/* BCH WR ECC 155:128 */
-#define REG_UMI_BCH_WR_ECC_4       __REG32(HW_UMI_BASE  + 0x60)
-/* BCH Read Error Location 1,0 */
-#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE  + 0x64)
-/* BCH Read Error Location 3,2 */
-#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE  + 0x68)
-/* BCH Read Error Location 5,4 */
-#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE  + 0x6c)
-/* BCH Read Error Location 7,6 */
-#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE  + 0x70)
-/* BCH Read Error Location 9,8 */
-#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE  + 0x74)
-/* BCH Read Error Location 11,10 */
-#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE  + 0x78)
-
-/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
-/* Enable wait pin during burst write or read */
-#define REG_UMI_TCR_WAITEN              0x80000000
-/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */
-#define REG_UMI_TCR_LOWFREQ             0x40000000
-/* 1=synch write, 0=async write */
-#define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
-/* 1=synch read, 0=async read */
-#define REG_UMI_TCR_MEMTYPE_SYNCREAD    0x10000000
-/* 1=page mode read, 0=normal mode read */
-#define REG_UMI_TCR_MEMTYPE_PAGEREAD    0x08000000
-/* page size/burst size (wrap only) */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK   0x07000000
-/* 4 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_4      0x00000000
-/* 8 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_8      0x01000000
-/* 16 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_16     0x02000000
-/* 32 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_32     0x03000000
-/* 64 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_64     0x04000000
-/* 128 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_128    0x05000000
-/* 256 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_256    0x06000000
-/* 512 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_512    0x07000000
-/* Page read access cycle / Burst write latency (n+2 / n+1) */
-#define REG_UMI_TCR_TPRC_TWLC_MASK      0x00f80000
-/* Bus turnaround cycle (n) */
-#define REG_UMI_TCR_TBTA_MASK           0x00070000
-/* Write pulse width cycle (n+1) */
-#define REG_UMI_TCR_TWP_MASK            0x0000f800
-/* Write recovery cycle (n+1) */
-#define REG_UMI_TCR_TWR_MASK            0x00000600
-/* Write address setup cycle (n+1) */
-#define REG_UMI_TCR_TAS_MASK            0x00000180
-/* Output enable delay cycle (n) */
-#define REG_UMI_TCR_TOE_MASK            0x00000060
-/* Read access cycle / Burst read latency (n+2 / n+1) */
-#define REG_UMI_TCR_TRC_TLC_MASK        0x0000001f
-
-/* REG_UMI_MMD_ICR bits */
-/* Flash write protection pin control */
-#define REG_UMI_MMD_ICR_FLASH_WP            0x8000
-/* Extend hold time for sram0, sram1 csn (39 MHz operation) */
-#define REG_UMI_MMD_ICR_XHCS                0x4000
-/* Enable SDRAM 2 interface control */
-#define REG_UMI_MMD_ICR_SDRAM2EN            0x2000
-/* Enable merge of flash banks 0/1 to 512 MBit bank */
-#define REG_UMI_MMD_ICR_INST512             0x1000
-/* Enable merge of flash banks 1/2 to 512 MBit bank */
-#define REG_UMI_MMD_ICR_DATA512             0x0800
-/* Enable SDRAM interface control */
-#define REG_UMI_MMD_ICR_SDRAMEN             0x0400
-/* Polarity of busy state of Burst Wait Signal */
-#define REG_UMI_MMD_ICR_WAITPOL             0x0200
-/* Enable burst clock stopped when not accessing external burst flash/sram */
-#define REG_UMI_MMD_ICR_BCLKSTOP            0x0100
-/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */
-#define REG_UMI_MMD_ICR_PERI1EN             0x0080
-/* Enable the peri2_csn to replace sdram_csn */
-#define REG_UMI_MMD_ICR_PERI2EN             0x0040
-/* Enable the peri3_csn to replace sdram2_csn */
-#define REG_UMI_MMD_ICR_PERI3EN             0x0020
-/* Enable sram bank1 for H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSB1               0x0010
-/* Enable sram bank0 for H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSB0               0x0008
-/* Polarity for assert3ed state of H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSPOL              0x0004
-/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */
-/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */
-#define REG_UMI_MMD_ICR_MRSMODE             0x0002
-/* MRS state for S/W controlled mode */
-#define REG_UMI_MMD_ICR_MRSSTATE            0x0001
-
-/* REG_UMI_NAND_TCR bits */
-/* Enable software to control CS */
-#define REG_UMI_NAND_TCR_CS_SWCTRL          0x80000000
-/* 16-bit nand wordsize if set */
-#define REG_UMI_NAND_TCR_WORD16             0x40000000
-/* Bus turnaround cycle (n) */
-#define REG_UMI_NAND_TCR_TBTA_MASK          0x00070000
-/* Write pulse width cycle (n+1) */
-#define REG_UMI_NAND_TCR_TWP_MASK           0x0000f800
-/* Write recovery cycle (n+1) */
-#define REG_UMI_NAND_TCR_TWR_MASK           0x00000600
-/* Write address setup cycle (n+1) */
-#define REG_UMI_NAND_TCR_TAS_MASK           0x00000180
-/* Output enable delay cycle (n) */
-#define REG_UMI_NAND_TCR_TOE_MASK           0x00000060
-/* Read access cycle (n+2) */
-#define REG_UMI_NAND_TCR_TRC_TLC_MASK       0x0000001f
-
-/* REG_UMI_NAND_RCSR bits */
-/* Status: Ready=1, Busy=0 */
-#define REG_UMI_NAND_RCSR_RDY               0x02
-/* Keep CS asserted during operation */
-#define REG_UMI_NAND_RCSR_CS_ASSERTED       0x01
-
-/* REG_UMI_NAND_ECC_CSR bits */
-/* Interrupt status - read-only */
-#define REG_UMI_NAND_ECC_CSR_NANDINT        0x80000000
-/* Read: Status of ECC done, Write: clear ECC interrupt */
-#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW     0x00800000
-/* Read: Status of R/B, Write: clear R/B interrupt */
-#define REG_UMI_NAND_ECC_CSR_RBINT_RAW      0x00400000
-/* 1 = Enable ECC Interrupt */
-#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE  0x00008000
-/* 1 = Assert interrupt at rising edge of R/B_ */
-#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE   0x00004000
-/* Calculate ECC by 0=512 bytes, 1=256 bytes */
-#define REG_UMI_NAND_ECC_CSR_256BYTE        0x00000080
-/* Enable ECC in hardware */
-#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE     0x00000001
-
-/* REG_UMI_BCH_CTRL_STATUS bits */
-/* Shift to Indicate Number of correctable errors detected */
-#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20
-/* Indicate Number of correctable errors detected */
-#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000
-/* Indicate Errors detected during read but uncorrectable */
-#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR    0x00080000
-/* Indicate Errors detected during read and are correctable */
-#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR      0x00040000
-/* Flag indicates BCH's ECC status of read process are valid */
-#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID  0x00020000
-/* Flag indicates BCH's ECC status of write process are valid */
-#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID  0x00010000
-/* Pause ECC calculation */
-#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010
-/* Enable Interrupt */
-#define REG_UMI_BCH_CTRL_STATUS_INT_EN        0x00000004
-/* Enable ECC during read */
-#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN     0x00000002
-/* Enable ECC during write */
-#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN     0x00000001
-/* Mask for location */
-#define REG_UMI_BCH_ERR_LOC_MASK              0x00001FFF
-/* location within a byte */
-#define REG_UMI_BCH_ERR_LOC_BYTE              0x00000007
-/* location within a word */
-#define REG_UMI_BCH_ERR_LOC_WORD              0x00000018
-/* location within a page (512 byte) */
-#define REG_UMI_BCH_ERR_LOC_PAGE              0x00001FE0
-#define REG_UMI_BCH_ERR_LOC_ADDR(index)     (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
-#endif
diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
deleted file mode 100644
index 5a94bbb032b6..000000000000
--- a/arch/arm/mach-bcmring/include/mach/timer.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  timer.h
-*
-*  PURPOSE:
-*
-*
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(BCM_LINUX_TIMER_H)
-#define BCM_LINUX_TIMER_H
-
-#if defined(__KERNEL__)
-
-/* ---- Include Files ---------------------------------------------------- */
-/* ---- Constants and Types ---------------------------------------------- */
-
-typedef unsigned int timer_tick_count_t;
-typedef unsigned int timer_tick_rate_t;
-typedef unsigned int timer_msec_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-/* ---- Function Prototypes ---------------------------------------------- */
-
-/****************************************************************************
-*
-*  timer_get_tick_count
-*
-*
-***************************************************************************/
-timer_tick_count_t timer_get_tick_count(void);
-
-/****************************************************************************
-*
-*  timer_get_tick_rate
-*
-*
-***************************************************************************/
-timer_tick_rate_t timer_get_tick_rate(void);
-
-/****************************************************************************
-*
-*  timer_get_msec
-*
-*
-***************************************************************************/
-timer_msec_t timer_get_msec(void);
-
-/****************************************************************************
-*
-*  timer_ticks_to_msec
-*
-*
-***************************************************************************/
-timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
-
-#endif /* __KERNEL__ */
-#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
deleted file mode 100644
index 40d033ec5892..000000000000
--- a/arch/arm/mach-bcmring/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Specifies the number of ticks per second
- */
-#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
deleted file mode 100644
index 9c9821b77977..000000000000
--- a/arch/arm/mach-bcmring/include/mach/uncompress.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#include <mach/csp/mm_addr.h>
-
-#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
-#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	/* Send out UARTA */
-	while (BCMRING_UART_0_FR & (1 << 5))
-		;
-
-	BCMRING_UART_0_DR = c;
-}
-
-
-static inline void flush(void)
-{
-	/* Wait for the tx fifo to be empty */
-	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
-		;
-
-	/* Wait for the final character to be sent on the txd line */
-	while (BCMRING_UART_0_FR & (1 << 3))
-		;
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
deleted file mode 100644
index 437fa683bcb2..000000000000
--- a/arch/arm/mach-bcmring/irq.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-#include <mach/csp/intcHw_reg.h>
-#include <mach/csp/mm_io.h>
-
-static void bcmring_mask_irq0(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC0_START),
-	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq0(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC0_START),
-	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
-}
-
-static void bcmring_mask_irq1(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC1_START),
-	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq1(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC1_START),
-	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
-}
-
-static void bcmring_mask_irq2(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_SINTC_START),
-	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq2(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_SINTC_START),
-	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
-}
-
-static struct irq_chip bcmring_irq0_chip = {
-	.name = "ARM-INTC0",
-	.irq_ack = bcmring_mask_irq0,
-	.irq_mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
-	.irq_unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
-};
-
-static struct irq_chip bcmring_irq1_chip = {
-	.name = "ARM-INTC1",
-	.irq_ack = bcmring_mask_irq1,
-	.irq_mask = bcmring_mask_irq1,
-	.irq_unmask = bcmring_unmask_irq1,
-};
-
-static struct irq_chip bcmring_irq2_chip = {
-	.name = "ARM-SINTC",
-	.irq_ack = bcmring_mask_irq2,
-	.irq_mask = bcmring_mask_irq2,
-	.irq_unmask = bcmring_unmask_irq2,
-};
-
-static void vic_init(void __iomem *base, struct irq_chip *chip,
-		     unsigned int irq_start, unsigned int vic_sources)
-{
-	unsigned int i;
-	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-		irq_set_chip(irq, chip);
-		irq_set_chip_data(irq, base);
-
-		if (vic_sources & (1 << i)) {
-			irq_set_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-	writel(0, base + INTCHW_INTSELECT);
-	writel(0, base + INTCHW_INTENABLE);
-	writel(~0, base + INTCHW_INTENCLEAR);
-	writel(0, base + INTCHW_IRQSTATUS);
-	writel(~0, base + INTCHW_SOFTINTCLEAR);
-}
-
-void __init bcmring_init_irq(void)
-{
-	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
-		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
-	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
-		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
-	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
-		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
-
-	/* special cases */
-	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
-		irq_set_handler(IRQ_GPIO0, handle_simple_irq);
-	}
-	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
-		irq_set_handler(IRQ_GPIO1, handle_simple_irq);
-	}
-}
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
deleted file mode 100644
index 1adec78ec940..000000000000
--- a/arch/arm/mach-bcmring/mm.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-
-#define IO_DESC(va, sz) { .virtual = va, \
-	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
-	.length = sz, \
-	.type = MT_DEVICE }
-
-#define MEM_DESC(va, sz) { .virtual = va, \
-	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
-	.length = sz, \
-	.type = MT_MEMORY }
-
-static struct map_desc bcmring_io_desc[] __initdata = {
-	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
-	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
-
-	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
-	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
-
-	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
-	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
-		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
-};
-
-void __init bcmring_map_io(void)
-{
-
-	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
-	/* Maximum DMA memory allowed is 14M */
-	init_consistent_dma_size(14 << 20);
-}
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
deleted file mode 100644
index af9c3d7e2a0c..000000000000
--- a/arch/arm/mach-bcmring/timer.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <csp/tmrHw.h>
-
-#include <mach/timer.h>
-/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
-/* The real time clock should probably be the real linux clocksource. */
-/* In the meantime, this file should agree with core.c as to the */
-/* profiling timer. If the clocksource is moved to rtc later, then */
-/* we can init the profiling timer here instead. */
-
-/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
-/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
-/* affect synchronization with scheduling and APM timing. */
-
-#define PROF_TIMER 1
-
-timer_tick_rate_t timer_get_tick_rate(void)
-{
-	return tmrHw_getCountRate(PROF_TIMER);
-}
-
-timer_tick_count_t timer_get_tick_count(void)
-{
-	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
-}
-
-timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
-{
-	static int tickRateMsec;
-
-	if (tickRateMsec == 0) {
-		tickRateMsec = timer_get_tick_rate() / 1000;
-	}
-
-	return ticks / tickRateMsec;
-}
-
-timer_msec_t timer_get_msec(void)
-{
-	return timer_ticks_to_msec(timer_get_tick_count());
-}
-
-EXPORT_SYMBOL(timer_get_tick_count);
-EXPORT_SYMBOL(timer_ticks_to_msec);
-EXPORT_SYMBOL(timer_get_tick_rate);
-EXPORT_SYMBOL(timer_get_msec);
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index ea036d621581..e6135363765a 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -16,12 +16,6 @@ config ARCH_CDB89712
 	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
 	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
 
-config ARCH_CEIVA
-	bool "CEIVA"
-	help
-	  Say Y here if you intend to run this kernel on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-
 config ARCH_CLEP7312
 	bool "CLEP7312"
 	help
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index f2f0256232e3..6da6940b3656 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -9,12 +9,9 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-obj-$(CONFIG_ARCH_CEIVA) += ceiva.o
 obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
-leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
-obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
deleted file mode 100644
index a70147e347ac..000000000000
--- a/arch/arm/mach-clps711x/ceiva.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-ceiva.c
- *
- *  Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/kernel.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct map_desc ceiva_io_desc[] __initdata = {
- 	/* SED1355 controlled video RAM & registers */
- 	{
-		.virtual	= CEIVA_VIRT_SED1355,
-		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	}
-};
-
-
-static void __init ceiva_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc));
-}
-
-
-MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
-	/* Maintainer: Rob Scott */
-	.atag_offset	= 0x100,
-	.map_io		= ceiva_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index f15293bd7974..509243d89a32 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -19,24 +19,25 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/io.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/sched.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
+#include <mach/hardware.h>
+
+static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
+		  *clk_tint, *clk_spi;
+static unsigned long latch;
+
 /*
  * This maps the generic CLPS711x registers
  */
@@ -166,8 +167,8 @@ void __init clps711x_init_irq(void)
 static unsigned long clps711x_gettimeoffset(void)
 {
 	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
+	hwticks = latch - (clps_readl(TC2D) & 0xffff);
+	return (hwticks * (tick_nsec / 1000)) / latch;
 }
 
 /*
@@ -185,15 +186,71 @@ static struct irqaction clps711x_timer_irq = {
 	.handler	= p720t_timer_interrupt,
 };
 
+static void add_fixed_clk(struct clk *clk, const char *name, int rate)
+{
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	clk_register_clkdev(clk, name, NULL);
+}
+
 static void __init clps711x_timer_init(void)
 {
-	unsigned int syscon;
+	int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
+	u32 tmp;
+
+	osc = 3686400;
+	ext = 13000000;
+
+	tmp = clps_readl(PLLR) >> 24;
+	if (tmp)
+		pll = (osc * tmp) / 2;
+	else
+		pll = 73728000; /* Default value */
+
+	tmp = clps_readl(SYSFLG2);
+	if (tmp & SYSFLG2_CKMODE) {
+		cpu = ext;
+		bus = cpu;
+		spi = 135400;
+	} else {
+		cpu = pll;
+		if (cpu >= 36864000)
+			bus = cpu / 2;
+		else
+			bus = 36864000 / 2;
+		spi = cpu / 576;
+	}
+
+	uart = bus / 10;
+
+	if (tmp & SYSFLG2_CKMODE) {
+		tmp = clps_readl(SYSCON2);
+		if (tmp & SYSCON2_OSTB)
+			timh = ext / 26;
+		else
+			timh = 541440;
+	} else
+		timh = cpu / 144;
+
+	timl = timh / 256;
+
+	/* All clocks are fixed */
+	add_fixed_clk(clk_pll, "pll", pll);
+	add_fixed_clk(clk_bus, "bus", bus);
+	add_fixed_clk(clk_uart, "uart", uart);
+	add_fixed_clk(clk_timerl, "timer_lf", timl);
+	add_fixed_clk(clk_timerh, "timer_hf", timh);
+	add_fixed_clk(clk_tint, "tint", 64);
+	add_fixed_clk(clk_spi, "spi", spi);
+
+	pr_info("CPU frequency set at %i Hz.\n", cpu);
+
+	latch = (timh + HZ / 2) / HZ;
 
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
+	tmp = clps_readl(SYSCON1);
+	tmp |= SYSCON1_TC2S | SYSCON1_TC2M;
+	clps_writel(tmp, SYSCON1);
 
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+	clps_writel(latch - 1, TC2D);
 
 	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 1dd806f2847e..c82e21ca49c7 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -31,8 +31,8 @@
 #define PBDDR		(0x0041)
 #define PCDDR		(0x0042)
 #define PDDDR		(0x0043)
-#define PEDR		(0x0080)
-#define PEDDR		(0x00c0)
+#define PEDR		(0x0083)
+#define PEDDR		(0x00c3)
 #define SYSCON1		(0x0100)
 #define SYSFLG1		(0x0140)
 #define MEMCFG1		(0x0180)
@@ -77,7 +77,7 @@
 #define KBDEOI		(0x1700)
 
 #define DAIR		(0x2000)
-#define DAIR0		(0x2040)
+#define DAIDR0		(0x2040)
 #define DAIDR1		(0x2080)
 #define DAIDR2		(0x20c0)
 #define DAISR		(0x2100)
@@ -191,8 +191,7 @@
 #define UBRLCR_WRDLEN8		(3 << 17)
 #define UBRLCR_WRDLEN_MASK	(3 << 17)
 
-#define SYNCIO_FRMLEN(x)	(((x) & 0x3f) << 7)
-#define SYNCIO_CFGLEN(x)	((x) & 0x7f)
+#define SYNCIO_FRMLEN(x)	(((x) & 0x1f) << 8)
 #define SYNCIO_SMCKEN		(1 << 13)
 #define SYNCIO_TXFRMEN		(1 << 14)
 
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 118b3d930573..cb3684f8dae0 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -28,17 +28,11 @@
 		.endm
 
 		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
 1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
+		tst	\rd, #1 << 11		@ UBUSYx
 		bne	1001b
-1002:
 		.endm
 
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 13a64fcd7dd1..8497775d6ee5 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -116,7 +116,6 @@
 
 #endif /* CONFIG_ARCH_EDB7211 */
 
-
 /*
  * Relevant bits in port D, which controls power to the various parts of
  * the LCD on the EDB7211.
@@ -125,51 +124,4 @@
 #define EDB_PD2_LCDEN		(1<<2)
 #define EDB_PD3_LCDBL		(1<<3)
 
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
 #endif
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
index ac8823ccff93..de6fd192d1c3 100644
--- a/arch/arm/mach-clps711x/include/mach/timex.h
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -1,23 +1,2 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
+/* Bogus value */
 #define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index bbc449fbe14a..000000000000
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/leds.c
- *
- *  Integrator LED control routines
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 pddr;
-
-	local_irq_save(flags);
-	switch(ledevt) {
-	case led_idle_start:
-		break;
-
-	case led_idle_end:
-		break;
-
-	case led_timer:
-		pddr = clps_readb(PDDR);
-		clps_writeb(pddr ^ 1, PDDR);
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_p720t())
-		leds_event = p720t_leds_event;
-
-	return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index f266d90b9efc..b752b586fc2f 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,6 +23,8 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/pgtable.h>
@@ -34,6 +36,8 @@
 #include <asm/mach/map.h>
 #include <mach/syspld.h>
 
+#include <asm/hardware/clps7111.h>
+
 #include "common.h"
 
 /*
@@ -107,6 +111,64 @@ static void __init p720t_init_early(void)
 	}
 }
 
+/*
+ * LED controled by CPLD
+ */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void p720t_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	u8 reg = clps_readb(PDDR);
+
+	if (b != LED_OFF)
+		reg |= 0x1;
+	else
+		reg &= ~0x1;
+
+	clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+	u8 reg = clps_readb(PDDR);
+
+	return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+	struct led_classdev *cdev;
+	int ret;
+
+	if (!machine_is_p720t())
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->name = "p720t:0";
+	cdev->brightness_set = p720t_led_set;
+	cdev->brightness_get = p720t_led_get;
+	cdev->default_trigger = "heartbeat";
+
+	ret = led_classdev_register(NULL, cdev);
+	if (ret	< 0) {
+		kfree(cdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+#endif
+
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index 1ce70a91f2e9..f091a9010c2f 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/time.h>
 
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 /* Timing value configuration */
 
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 0031864e7f11..95b5e102ceb1 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -28,11 +28,11 @@
 
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0149fb453be3..1295e616ceee 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -40,10 +40,10 @@
 
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 1c7b1f46a8f3..88ebea89abdf 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 8e7703213b08..2f88103c6459 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -23,11 +23,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 688a9c556dc9..1b4a8adcfdc9 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -33,11 +33,11 @@
 
 #include <mach/mux.h>
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
 
 #include <media/tvp514x.h>
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d34ed55912b2..ca72fc4b8cca 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -31,13 +31,13 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 958679a20e13..9944367b4931 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -38,11 +38,11 @@
 
 #include <mach/common.h>
 #include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index beecde3a1d2f..43e4a0d663fa 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -26,9 +26,9 @@
 #include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define MITYOMAPL138_PHY_ID		""
 
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 5de69f2fcca9..144bf31d68dd 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void)
 	dm644x_init();
 }
 
-/*
- I2C initialization
-*/
-static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
-};
-
-static	int ntosd2_init_i2c(void)
-{
-	int	status;
-
-	davinci_init_i2c(&ntosd2_i2c_pdata);
-	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
-	if (status == 0) {
-		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
-		if (status == 0) {
-			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
-			if (status > 0) {
-				ntosd2_i2c_info[0].irq = status;
-				i2c_register_board_info(1,
-					ntosd2_i2c_info,
-					ARRAY_SIZE(ntosd2_i2c_info));
-			}
-		}
-	}
-	return status;
-}
-
 static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 	.wires		= 4,
 	.version	= MMC_CTLR_VERSION_1
@@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void)
 {
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int	status;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	/* Initialize I2C interface specific for this board */
-	status = ntosd2_init_i2c();
-	if (status < 0)
-		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
-						"	 %d\n", status);
-
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 9078acf94bac..6957787fa7f3 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -36,10 +36,10 @@
 #include <asm/mach/flash.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index ac4e003ad863..be3099733b1f 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -88,7 +88,7 @@ static struct davinci_mmc_config mmc_config = {
 	.version	= MMC_CTLR_VERSION_1,
 };
 
-static const short sdio1_pins[] __initdata = {
+static const short sdio1_pins[] __initconst = {
 	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
 	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
 	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
@@ -96,12 +96,12 @@ static const short sdio1_pins[] __initdata = {
 	-1
 };
 
-static const short uart1_pins[] __initdata = {
+static const short uart1_pins[] __initconst = {
 	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
 	-1
 };
 
-static const short ssp_pins[] __initdata = {
+static const short ssp_pins[] __initconst = {
 	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
 	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
 	TNETV107X_SSP1_3, -1
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index deee5c2da754..510648e0394b 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -838,7 +838,7 @@ static const struct mux_config da830_pins[] = {
 #endif
 };
 
-const short da830_emif25_pins[] __initdata = {
+const short da830_emif25_pins[] __initconst = {
 	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
 	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
 	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
@@ -853,19 +853,19 @@ const short da830_emif25_pins[] __initdata = {
 	-1
 };
 
-const short da830_spi0_pins[] __initdata = {
+const short da830_spi0_pins[] __initconst = {
 	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
 	DA830_NSPI0_SCS_0,
 	-1
 };
 
-const short da830_spi1_pins[] __initdata = {
+const short da830_spi1_pins[] __initconst = {
 	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
 	DA830_NSPI1_SCS_0,
 	-1
 };
 
-const short da830_mmc_sd_pins[] __initdata = {
+const short da830_mmc_sd_pins[] __initconst = {
 	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
 	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
 	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
@@ -873,32 +873,32 @@ const short da830_mmc_sd_pins[] __initdata = {
 	-1
 };
 
-const short da830_uart0_pins[] __initdata = {
+const short da830_uart0_pins[] __initconst = {
 	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
 	-1
 };
 
-const short da830_uart1_pins[] __initdata = {
+const short da830_uart1_pins[] __initconst = {
 	DA830_UART1_RXD, DA830_UART1_TXD,
 	-1
 };
 
-const short da830_uart2_pins[] __initdata = {
+const short da830_uart2_pins[] __initconst = {
 	DA830_UART2_RXD, DA830_UART2_TXD,
 	-1
 };
 
-const short da830_usb20_pins[] __initdata = {
+const short da830_usb20_pins[] __initconst = {
 	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
 	-1
 };
 
-const short da830_usb11_pins[] __initdata = {
+const short da830_usb11_pins[] __initconst = {
 	DA830_USB_REFCLKIN,
 	-1
 };
 
-const short da830_uhpi_pins[] __initdata = {
+const short da830_uhpi_pins[] __initconst = {
 	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
 	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
 	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
@@ -909,14 +909,14 @@ const short da830_uhpi_pins[] __initdata = {
 	-1
 };
 
-const short da830_cpgmac_pins[] __initdata = {
+const short da830_cpgmac_pins[] __initconst = {
 	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
 	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
 	DA830_MDIO_D,
 	-1
 };
 
-const short da830_emif3c_pins[] __initdata = {
+const short da830_emif3c_pins[] __initconst = {
 	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
 	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
 	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
@@ -935,7 +935,7 @@ const short da830_emif3c_pins[] __initdata = {
 	-1
 };
 
-const short da830_mcasp0_pins[] __initdata = {
+const short da830_mcasp0_pins[] __initconst = {
 	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
 	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
 	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
@@ -945,7 +945,7 @@ const short da830_mcasp0_pins[] __initdata = {
 	-1
 };
 
-const short da830_mcasp1_pins[] __initdata = {
+const short da830_mcasp1_pins[] __initconst = {
 	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
 	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
 	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
@@ -954,24 +954,24 @@ const short da830_mcasp1_pins[] __initdata = {
 	-1
 };
 
-const short da830_mcasp2_pins[] __initdata = {
+const short da830_mcasp2_pins[] __initconst = {
 	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
 	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
 	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
 	-1
 };
 
-const short da830_i2c0_pins[] __initdata = {
+const short da830_i2c0_pins[] __initconst = {
 	DA830_I2C0_SDA, DA830_I2C0_SCL,
 	-1
 };
 
-const short da830_i2c1_pins[] __initdata = {
+const short da830_i2c1_pins[] __initconst = {
 	DA830_I2C1_SCL, DA830_I2C1_SDA,
 	-1
 };
 
-const short da830_lcdcntl_pins[] __initdata = {
+const short da830_lcdcntl_pins[] __initconst = {
 	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
 	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
 	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
@@ -981,34 +981,34 @@ const short da830_lcdcntl_pins[] __initdata = {
 	-1
 };
 
-const short da830_pwm_pins[] __initdata = {
+const short da830_pwm_pins[] __initconst = {
 	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
 	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
 	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
 	-1
 };
 
-const short da830_ecap0_pins[] __initdata = {
+const short da830_ecap0_pins[] __initconst = {
 	DA830_ECAP0_APWM0,
 	-1
 };
 
-const short da830_ecap1_pins[] __initdata = {
+const short da830_ecap1_pins[] __initconst = {
 	DA830_ECAP1_APWM1,
 	-1
 };
 
-const short da830_ecap2_pins[] __initdata = {
+const short da830_ecap2_pins[] __initconst = {
 	DA830_ECAP2_APWM2,
 	-1
 };
 
-const short da830_eqep0_pins[] __initdata = {
+const short da830_eqep0_pins[] __initconst = {
 	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
 	-1
 };
 
-const short da830_eqep1_pins[] __initdata = {
+const short da830_eqep1_pins[] __initconst = {
 	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
 	-1
 };
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b44dc844e15e..6676dee7104e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -576,17 +576,17 @@ static const struct mux_config da850_pins[] = {
 #endif
 };
 
-const short da850_i2c0_pins[] __initdata = {
+const short da850_i2c0_pins[] __initconst = {
 	DA850_I2C0_SDA, DA850_I2C0_SCL,
 	-1
 };
 
-const short da850_i2c1_pins[] __initdata = {
+const short da850_i2c1_pins[] __initconst = {
 	DA850_I2C1_SCL, DA850_I2C1_SDA,
 	-1
 };
 
-const short da850_lcdcntl_pins[] __initdata = {
+const short da850_lcdcntl_pins[] __initconst = {
 	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
 	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
 	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 8db0fc6809dd..a37fc44e29bc 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 
 #include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
 
 #include <media/davinci/vpfe_capture.h>
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index d2f9666284a7..3a42b6f79aa9 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -15,12 +15,12 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
 #include <mach/time.h>
 
 #include "davinci.h"
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 678cd99b7336..adbde33eca01 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -27,7 +27,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a50d49de1883..719e22f2a37e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -30,8 +30,8 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h
deleted file mode 100644
index 05b293443097..000000000000
--- a/arch/arm/mach-davinci/include/mach/aemif.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#define NRCSR_OFFSET		0x00
-#define AWCCR_OFFSET		0x04
-#define A1CR_OFFSET		0x10
-
-#define ACR_ASIZE_MASK		0x3
-#define ACR_EW_MASK		BIT(30)
-#define ACR_SS_MASK		BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
-	u8	wsetup;
-	u8	wstrobe;
-	u8	whold;
-
-	u8	rsetup;
-	u8	rstrobe;
-	u8	rhold;
-
-	u8	ta;
-};
-
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs);
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index a2f1f274f189..33e78ae2a254 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -19,12 +19,12 @@
 
 #include <mach/serial.h>
 #include <mach/edma.h>
-#include <mach/i2c.h>
 #include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
deleted file mode 100644
index 2312d197dfb7..000000000000
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
-	unsigned int	bus_delay;	/* post-transaction delay (usec) */
-	unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
-	unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
deleted file mode 100644
index 7a560e05bda8..000000000000
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef DAVINCI_KEYSCAN_H
-#define DAVINCI_KEYSCAN_H
-
-#include <linux/io.h>
-
-enum davinci_matrix_types {
-	DAVINCI_KEYSCAN_MATRIX_4X4,
-	DAVINCI_KEYSCAN_MATRIX_5X3,
-};
-
-struct davinci_ks_platform_data {
-	int		(*device_enable)(struct device *dev);
-	unsigned short	*keymap;
-	u32		keymapsize;
-	u8		rep:1;
-	u8		strobe;
-	u8		interval;
-	u8		matrix_type;
-};
-
-#endif
-
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
deleted file mode 100644
index 5ba6b22ce338..000000000000
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Board-specific MMC configuration
- */
-
-#ifndef _DAVINCI_MMC_H
-#define _DAVINCI_MMC_H
-
-#include <linux/types.h>
-#include <linux/mmc/host.h>
-
-struct davinci_mmc_config {
-	/* get_cd()/get_wp() may sleep */
-	int	(*get_cd)(int module);
-	int	(*get_ro)(int module);
-
-	void	(*set_power)(int module, bool on);
-
-	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
-	u8	wires;
-
-	u32     max_freq;
-
-	/* any additional host capabilities: OR'd in to mmc->f_caps */
-	u32     caps;
-
-	/* Version of the MMC/SD controller */
-	u8	version;
-
-	/* Number of sg segments */
-	u8	nr_sg;
-};
-void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
-
-enum {
-	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
-	MMC_CTLR_VERSION_2,	/* DA830 */
-};
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
deleted file mode 100644
index 1cf555aef896..000000000000
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- *   Sander Huijsen <Shuijsen@optelecom-nkf.com>
- *   Troy Kisky <troy.kisky@boundarydevices.com>
- *   Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/nand.h>
-
-#define NANDFCR_OFFSET		0x60
-#define NANDFSR_OFFSET		0x64
-#define NANDF1ECC_OFFSET	0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET	0xbc
-#define NAND_4BIT_ECC1_OFFSET		0xc0
-#define NAND_4BIT_ECC2_OFFSET		0xc4
-#define NAND_4BIT_ECC3_OFFSET		0xc8
-#define NAND_4BIT_ECC4_OFFSET		0xcc
-#define NAND_ERR_ADD1_OFFSET		0xd0
-#define NAND_ERR_ADD2_OFFSET		0xd4
-#define NAND_ERR_ERRVAL1_OFFSET		0xd8
-#define NAND_ERR_ERRVAL2_OFFSET		0xdc
-
-/* NOTE:  boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define	MASK_ALE		0x08
-#define	MASK_CLE		0x10
-
-struct davinci_nand_pdata {		/* platform_data */
-	uint32_t		mask_ale;
-	uint32_t		mask_cle;
-
-	/* for packages using two chipselects */
-	uint32_t		mask_chipsel;
-
-	/* board's default static partition info */
-	struct mtd_partition	*parts;
-	unsigned		nr_parts;
-
-	/* none  == NAND_ECC_NONE (strongly *not* advised!!)
-	 * soft  == NAND_ECC_SOFT
-	 * else  == NAND_ECC_HW, according to ecc_bits
-	 *
-	 * All DaVinci-family chips support 1-bit hardware ECC.
-	 * Newer ones also support 4-bit ECC, but are awkward
-	 * using it with large page chips.
-	 */
-	nand_ecc_modes_t	ecc_mode;
-	u8			ecc_bits;
-
-	/* e.g. NAND_BUSWIDTH_16 */
-	unsigned		options;
-	/* e.g. NAND_BBT_USE_FLASH */
-	unsigned		bbt_options;
-
-	/* Main and mirror bbt descriptor overrides */
-	struct nand_bbt_descr	*bbt_td;
-	struct nand_bbt_descr	*bbt_md;
-
-	/* Access timings */
-	struct davinci_aemif_timing	*timing;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
deleted file mode 100644
index 7af305b37868..000000000000
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS	0xFF
-
-enum {
-	SPI_VERSION_1, /* For DM355/DM365/DM6467 */
-	SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version:	version of the SPI IP. Different DaVinci devices have slightly
- *		varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line:	interrupt line used to connect the SPI IP to the ARM interrupt
- *		controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel:	list of GPIOs which can act as chip-selects for the SPI.
- *		SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- *		to populate if all chip-selects are internal.
- * @cshold_bug:	set this to true if the SPI controller on your chip requires
- *		a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- *		device on the bus.
- */
-struct davinci_spi_platform_data {
-	u8			version;
-	u8			num_chipselect;
-	u8			intr_line;
-	u8			*chip_sel;
-	bool			cshold_bug;
-	enum dma_event_q	dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay:	amount of delay between transmissions. Measured in number of
- *		SPI module clocks.
- * @odd_parity:	polarity of parity flag at the end of transmit data stream.
- *		0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- *		data stream.
- * @io_type:	type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay:	chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay:	chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay:	transmit data finished to SPI ENAn pin inactive time. Measured
- *		in number of SPI clocks.
- * @c2edelay:	chip-select active to SPI ENAn signal active time. Measured in
- *		number of SPI clocks.
- */
-struct davinci_spi_config {
-	u8	wdelay;
-	u8	odd_parity;
-	u8	parity_enable;
-#define SPI_IO_TYPE_INTR	0
-#define SPI_IO_TYPE_POLL	1
-#define SPI_IO_TYPE_DMA		2
-	u8	io_type;
-	u8	timer_disable;
-	u8	c2tdelay;
-	u8	t2cdelay;
-	u8	t2edelay;
-	u8	c2edelay;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 83e5926f3c46..1656a02e3eda 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -36,8 +36,8 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/ti_ssp.h>
 
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
deleted file mode 100644
index e0bc4abe69c2..000000000000
--- a/arch/arm/mach-davinci/include/mach/usb.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * USB related definitions
- *
- * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
-struct	da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
-				     unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct	da8xx_ohci_root_hub {
-	/* Switch the port power on/off */
-	int	(*set_power)(unsigned port, int on);
-	/* Read the port power status */
-	int	(*get_power)(unsigned port);
-	/* Read the port over-current indicator */
-	int	(*get_oci)(unsigned port);
-	/* Over-current indicator change notification (pass NULL to disable) */
-	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
-
-	/* Time from power on to power good (in 2 ms units) */
-	u8	potpgt;
-};
-
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
-
-#endif	/* ifndef __ASM_ARCH_USB_H */
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 23d2b6d9fa63..f77b95336e2b 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -10,7 +10,7 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
 
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index dd937c526a45..00154e74ce6b 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -15,6 +15,13 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
+config MACH_DOVE_DT
+	bool "Marvell Dove Flattened Device Tree"
+	select USE_OF
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index fa0f01856060..5e683baf96cf 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,4 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
-
+obj-y				+= common.o addr-map.o irq.o mpp.o
+obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 4db5de54b6a7..b37bef1d5ffa 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -16,6 +16,8 @@
 #include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -24,41 +26,30 @@
 #include <asm/mach/time.h>
 #include <asm/mach/pci.h>
 #include <mach/dove.h>
+#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
 
-static int get_tclk(void);
-
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
 static struct map_desc dove_io_desc[] __initdata = {
 	{
-		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_SB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
 		.length		= DOVE_SB_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_NB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
 		.length		= DOVE_NB_REGS_SIZE,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
-		.length		= DOVE_PCIE0_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
-		.length		= DOVE_PCIE1_IO_SIZE,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -70,14 +61,69 @@ void __init dove_map_io(void)
 /*****************************************************************************
  * CLK tree
  ****************************************************************************/
+static int dove_tclk;
+
+static DEFINE_SPINLOCK(gating_lock);
 static struct clk *tclk;
 
-static void __init clk_init(void)
+static struct clk __init *dove_register_gate(const char *name,
+					     const char *parent, u8 bit_idx)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       get_tclk());
+	return clk_register_gate(NULL, name, parent, 0,
+				 (void __iomem *)CLOCK_GATING_CONTROL,
+				 bit_idx, 0, &gating_lock);
+}
 
-	orion_clkdev_init(tclk);
+static void __init dove_clk_init(void)
+{
+	struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
+	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
+	struct clk *xor0, *xor1, *ge, *gephy;
+
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       dove_tclk);
+
+	usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
+	usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
+	sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
+	pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0);
+	pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
+	sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
+	sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
+	nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
+	camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
+	i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
+	i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
+	crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
+	ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
+	pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
+	xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
+	xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
+	gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+	ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
+
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk);
+
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion-ehci.1", usb1);
+	orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
+	orion_clkdev_add("0", "sata_mv.0", sata);
+	orion_clkdev_add("0", "pcie", pex0);
+	orion_clkdev_add("1", "pcie", pex1);
+	orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
+	orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
+	orion_clkdev_add(NULL, "orion_nand", nand);
+	orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
+	orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
+	orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, "dove-ac97", ac97);
+	orion_clkdev_add(NULL, "dove-pdma", pdma);
+	orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
+	orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
 }
 
 /*****************************************************************************
@@ -102,7 +148,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+			1600);
 }
 
 /*****************************************************************************
@@ -187,16 +234,16 @@ void __init dove_init_early(void)
 	orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static int get_tclk(void)
+static int __init dove_find_tclk(void)
 {
-	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
 	return 166666667;
 }
 
 static void __init dove_timer_init(void)
 {
+	dove_tclk = dove_find_tclk();
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_DOVE_BRIDGE, get_tclk());
+			IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
 struct sys_timer dove_timer = {
@@ -204,6 +251,15 @@ struct sys_timer dove_timer = {
 };
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init dove_crypto_init(void)
+{
+	orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
+			  DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
+}
+
+/*****************************************************************************
  * XOR 0
  ****************************************************************************/
 void __init dove_xor0_init(void)
@@ -284,16 +340,16 @@ void __init dove_sdio1_init(void)
 
 void __init dove_init(void)
 {
-	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
-	tauros2_init();
+	tauros2_init(0);
 #endif
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	clk_init();
+	dove_clk_init();
 
 	/* internal devices that every board has */
 	dove_rtc_init();
@@ -316,3 +372,67 @@ void dove_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+#if defined(CONFIG_MACH_DOVE_DT)
+/*
+ * Auxdata required until real OF clock provider
+ */
+struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
+	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+		       NULL),
+	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
+	{},
+};
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	/* Setup root of clk tree */
+	dove_clk_init();
+
+	/* Internal devices not ported to DT yet */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+
+	dove_ge00_init(&dove_dt_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_pcie_init(1, 1);
+	dove_crypto_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     dove_auxdata_lookup, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+	"marvell,dove",
+	NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
+	.init_irq	= orion_dt_init_irq,
+	.timer		= &dove_timer,
+	.init_machine	= dove_dt_init,
+	.restart	= dove_restart,
+	.dt_compat	= dove_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 6432a3ba864b..1a233404b735 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -26,7 +26,11 @@ void dove_init_irq(void);
 void dove_setup_cpu_mbus(void);
 void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void dove_sata_init(struct mv_sata_platform_data *sata_data);
+#ifdef CONFIG_PCI
 void dove_pcie_init(int init_port0, int init_port1);
+#else
+static inline void dove_pcie_init(int init_port0, int init_port1) { }
+#endif
 void dove_ehci0_init(void);
 void dove_ehci1_init(void);
 void dove_uart0_init(void);
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index f953bb54aa9d..99f259e8cf33 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -13,22 +13,22 @@
 
 #include <mach/dove.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0000)
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define  CPU_CTRL_PCIE0_LINK	0x00000001
 #define  CPU_RESET		0x00000002
 #define  CPU_CTRL_PCIE1_LINK	0x00000008
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define  SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define  SOFT_RESET		0x00000001
 
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define FIQ_MASK_LOW_OFF	0x0008
@@ -47,9 +47,9 @@
 #define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
 #define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
 
-#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE + 0x011c)
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE + 0x0300)
 
 #endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index d52b0ef313b7..661725e3115a 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -25,7 +25,7 @@
  */
 
 #define DOVE_CESA_PHYS_BASE		0xc8000000
-#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_VIRT_BASE		IOMEM(0xfdb00000)
 #define DOVE_CESA_SIZE			SZ_1M
 
 #define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
@@ -38,101 +38,99 @@
 #define DOVE_BOOTROM_SIZE		SZ_128M
 
 #define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_VIRT_BASE	IOMEM(0xfdd00000)
 #define DOVE_SCRATCHPAD_SIZE		SZ_1M
 
 #define DOVE_SB_REGS_PHYS_BASE		0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
 #define DOVE_SB_REGS_SIZE		SZ_8M
 
 #define DOVE_NB_REGS_PHYS_BASE		0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_VIRT_BASE		IOMEM(0xfe600000)
 #define DOVE_NB_REGS_SIZE		SZ_8M
 
 #define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
-#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
 #define DOVE_PCIE0_IO_BUS_BASE		0x00000000
-#define DOVE_PCIE0_IO_SIZE		SZ_1M
+#define DOVE_PCIE0_IO_SIZE		SZ_64K
 
 #define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
-#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
-#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
-#define DOVE_PCIE1_IO_SIZE		SZ_1M
+#define DOVE_PCIE1_IO_BUS_BASE		0x00010000
+#define DOVE_PCIE1_IO_SIZE		SZ_64K
 
 /*
  * Dove Core Registers Map
  */
 
 /* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x14600)
 
 /* North-South Bridge */
-#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x20000)
 
 /* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x30000)
 
 /* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x40000)
 
 /* USB */
-#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x51000)
 
 /* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60A00)
 
 /* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60B00)
 
 /* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x70000)
 
 /* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x80000)
 
 /* CAFE */
-#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x98000)
 
 /* SATA */
-#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xa0000)
 
 /* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb4000)
 
 /* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xc0000)
 
 /* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE + 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE + 0x018)
+#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0420)
+#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
@@ -144,44 +142,44 @@
 #define  DOVE_SD0_GPIO_SEL		(1 << 0)
 
 /* Power Management */
-#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0000)
 #define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
 
 /* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xd8500)
 
 /* AC97 */
-#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe0000)
 
 /* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe4000)
 
-#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
-#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
 #define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
 #define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
 #define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
-#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE + 0xe8034)
 #define  DOVE_SSP_ON_AU1		(1 << 0)
 #define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
 #define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
 /* Memory Controller */
-#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE + 0x00000)
 
 /* LCD Controller */
-#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x30000)
 
 /* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x40000)
 
 /* Video Engine */
-#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x400000)
 
 #endif
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
deleted file mode 100644
index e7e5101e35a5..000000000000
--- a/arch/arm/mach-dove/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
deleted file mode 100644
index 29c8b85355a5..000000000000
--- a/arch/arm/mach-dove/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "dove.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
-						 DOVE_PCIE0_IO_VIRT_BASE))
-
-#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
index 3ad9f946a9e8..7bcd0dfce4b1 100644
--- a/arch/arm/mach-dove/include/mach/pm.h
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -13,24 +13,42 @@
 #include <mach/irqs.h>
 
 #define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
-#define  CLOCK_GATING_USB0_MASK		(1 << 0)
-#define  CLOCK_GATING_USB1_MASK		(1 << 1)
-#define  CLOCK_GATING_GBE_MASK		(1 << 2)
-#define  CLOCK_GATING_SATA_MASK		(1 << 3)
-#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
-#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
-#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
-#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
-#define  CLOCK_GATING_NAND_MASK		(1 << 10)
-#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
-#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
-#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
-#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
-#define  CLOCK_GATING_AC97_MASK		(1 << 21)
-#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
-#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
-#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
-#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+#define  CLOCK_GATING_BIT_USB0		0
+#define  CLOCK_GATING_BIT_USB1		1
+#define  CLOCK_GATING_BIT_GBE		2
+#define  CLOCK_GATING_BIT_SATA		3
+#define  CLOCK_GATING_BIT_PCIE0		4
+#define  CLOCK_GATING_BIT_PCIE1		5
+#define  CLOCK_GATING_BIT_SDIO0		8
+#define  CLOCK_GATING_BIT_SDIO1		9
+#define  CLOCK_GATING_BIT_NAND		10
+#define  CLOCK_GATING_BIT_CAMERA	11
+#define  CLOCK_GATING_BIT_I2S0		12
+#define  CLOCK_GATING_BIT_I2S1		13
+#define  CLOCK_GATING_BIT_CRYPTO	15
+#define  CLOCK_GATING_BIT_AC97		21
+#define  CLOCK_GATING_BIT_PDMA		22
+#define  CLOCK_GATING_BIT_XOR0		23
+#define  CLOCK_GATING_BIT_XOR1		24
+#define  CLOCK_GATING_BIT_GIGA_PHY	30
+#define  CLOCK_GATING_USB0_MASK		(1 << CLOCK_GATING_BIT_USB0)
+#define  CLOCK_GATING_USB1_MASK		(1 << CLOCK_GATING_BIT_USB1)
+#define  CLOCK_GATING_GBE_MASK		(1 << CLOCK_GATING_BIT_GBE)
+#define  CLOCK_GATING_SATA_MASK		(1 << CLOCK_GATING_BIT_SATA)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << CLOCK_GATING_BIT_PCIE0)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << CLOCK_GATING_BIT_PCIE1)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << CLOCK_GATING_BIT_SDIO0)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << CLOCK_GATING_BIT_SDIO1)
+#define  CLOCK_GATING_NAND_MASK		(1 << CLOCK_GATING_BIT_NAND)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << CLOCK_GATING_BIT_CAMERA)
+#define  CLOCK_GATING_I2S0_MASK		(1 << CLOCK_GATING_BIT_I2S0)
+#define  CLOCK_GATING_I2S1_MASK		(1 << CLOCK_GATING_BIT_I2S1)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << CLOCK_GATING_BIT_CRYPTO)
+#define  CLOCK_GATING_AC97_MASK		(1 << CLOCK_GATING_BIT_AC97)
+#define  CLOCK_GATING_PDMA_MASK		(1 << CLOCK_GATING_BIT_PDMA)
+#define  CLOCK_GATING_XOR0_MASK		(1 << CLOCK_GATING_BIT_XOR0)
+#define  CLOCK_GATING_XOR1_MASK		(1 << CLOCK_GATING_BIT_XOR1)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
 #define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 9bc97a5baaa8..087711524e8a 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -18,6 +18,7 @@
 #include <asm/mach/irq.h>
 #include <mach/pm.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 
 static void pmu_irq_mask(struct irq_data *d)
@@ -99,19 +100,19 @@ void __init dove_init_irq(void)
 {
 	int i;
 
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 
 	/*
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 7f70afc26f91..60bd729a1ba5 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <plat/mpp.h>
 #include <mach/dove.h>
+#include <plat/orion-gpio.h>
 #include "mpp.h"
 
 struct dove_mpp_grp {
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 47921b0cdc65..bb15b26041cb 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -26,9 +26,8 @@ struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
-	char			io_space_name[16];
 	char			mem_space_name[16];
-	struct resource		res[2];
+	struct resource		res;
 };
 
 static struct pcie_port pcie_port[2];
@@ -53,24 +52,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	orion_pcie_setup(pp->base);
 
-	/*
-	 * IORESOURCE_IO
-	 */
-	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-		 "PCIe %d I/O", pp->index);
-	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-	pp->res[0].name = pp->io_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
-		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
-	} else {
-		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
-		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
-	}
-	pp->res[0].flags = IORESOURCE_IO;
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+	if (pp->index == 0)
+		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
+	else
+		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
 
 	/*
 	 * IORESOURCE_MEM
@@ -78,18 +63,18 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 		 "PCIe %d MEM", pp->index);
 	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[1].name = pp->mem_space_name;
+	pp->res.name = pp->mem_space_name;
 	if (pp->index == 0) {
-		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
-		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+		pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1;
 	} else {
-		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
-		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+		pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1;
 	}
-	pp->res[1].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[1]))
+	pp->res.flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res))
 		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
 	return 1;
 }
@@ -197,20 +182,20 @@ static struct hw_pci dove_pci __initdata = {
 	.map_irq	= dove_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Dove PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk(KERN_INFO "link up\n");
 
 		pp->index = index;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
-		memset(pp->res, 0, sizeof(pp->res));
+		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
 		printk(KERN_INFO "link down, ignoring\n");
 	}
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 6520ac835802..935e4af01a27 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -4,9 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= core.o io.o
+obj-y			:= core.o io.o leds.o
 obj-m			:=
 obj-n			:=
 obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 6f8068692edf..f0fe6b5350e2 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -74,22 +74,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
 	 * sparse external-decode ISAIO space
 	 */
 	{	/* IRQ_STAT/IRQ_MCLR */
-		.virtual	= IRQ_STAT,
+		.virtual	= (unsigned long)IRQ_STAT,
 		.pfn		= __phys_to_pfn(TRICK4_PHYS),
 		.length		= TRICK4_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* IRQ_MASK/IRQ_MSET */
-		.virtual	= IRQ_MASK,
+		.virtual	= (unsigned long)IRQ_MASK,
 		.pfn		= __phys_to_pfn(TRICK3_PHYS),
 		.length		= TRICK3_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* SOFT_BASE */
-		.virtual	= SOFT_BASE,
+		.virtual	= (unsigned long)SOFT_BASE,
 		.pfn		= __phys_to_pfn(TRICK1_PHYS),
 		.length		= TRICK1_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PIT_BASE */
-		.virtual	= PIT_BASE,
+		.virtual	= (unsigned long)PIT_BASE,
 		.pfn		= __phys_to_pfn(TRICK0_PHYS),
 		.length		= TRICK0_SIZE,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
index c93c9e43012d..afe137ee172e 100644
--- a/arch/arm/mach-ebsa110/core.h
+++ b/arch/arm/mach-ebsa110/core.h
@@ -31,11 +31,11 @@
 #define TRICK7_PHYS		0xf3c00000
 
 /* Virtual addresses */
-#define PIT_BASE		0xfc000000	/* trick 0 */
-#define SOFT_BASE		0xfd000000	/* trick 1 */
-#define IRQ_MASK		0xfe000000	/* trick 3 - read */
-#define IRQ_MSET		0xfe000000	/* trick 3 - write */
-#define IRQ_STAT		0xff000000	/* trick 4 - read */
-#define IRQ_MCLR		0xff000000	/* trick 4 - write */
+#define PIT_BASE		IOMEM(0xfc000000)	/* trick 0 */
+#define SOFT_BASE		IOMEM(0xfd000000)	/* trick 1 */
+#define IRQ_MASK		IOMEM(0xfe000000)	/* trick 3 - read */
+#define IRQ_MSET		IOMEM(0xfe000000)	/* trick 3 - write */
+#define IRQ_STAT		IOMEM(0xff000000)	/* trick 4 - read */
+#define IRQ_MCLR		IOMEM(0xff000000)	/* trick 4 - write */
 
 #endif
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 99e14e362500..0398258c20cd 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -1,52 +1,71 @@
 /*
- *  linux/arch/arm/mach-ebsa110/leds.c
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
  *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA-110 LED control routines.  We use the led as follows:
- *
- *   - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
-#include <mach/hardware.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include "core.h"
 
-static spinlock_t leds_lock;
-
-static void ebsa110_leds_event(led_event_t ledevt)
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void ebsa110_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	unsigned long flags;
+	u8 reg = __raw_readb(SOFT_BASE);
 
-	spin_lock_irqsave(&leds_lock, flags);
+	if (b != LED_OFF)
+		reg |= 0x80;
+	else
+		reg &= ~0x80;
 
-	switch(ledevt) {
-	case led_timer:
-		*(volatile unsigned char *)SOFT_BASE ^= 128;
-		break;
+	__raw_writeb(reg, SOFT_BASE);
+}
 
-	default:
-		break;
-	}
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+	u8 reg = __raw_readb(SOFT_BASE);
 
-	spin_unlock_irqrestore(&leds_lock, flags);
+	return (reg & 0x80) ? LED_FULL : LED_OFF;
 }
 
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
 {
-	if (machine_is_ebsa110())
-		leds_event = ebsa110_leds_event;
+
+	struct led_classdev *cdev;
+	int ret;
+
+	if (!machine_is_ebsa110())
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->name = "ebsa110:0";
+	cdev->brightness_set = ebsa110_led_set;
+	cdev->brightness_get = ebsa110_led_get;
+	cdev->default_trigger = "heartbeat";
+
+	ret = led_classdev_register(NULL, cdev);
+	if (ret	< 0) {
+		kfree(cdev);
+		return ret;
+	}
 
 	return 0;
 }
 
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
+#endif
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index a472777e9eba..41383bf03d4b 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/sizes.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4afe52aaaff3..e85bf17f2d2a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,9 +36,9 @@
 #include <linux/export.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/keypad-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
index 16976d7bdc8a..d8bfd02f5047 100644
--- a/arch/arm/mach-ep93xx/dma.c
+++ b/arch/arm/mach-ep93xx/dma.c
@@ -25,7 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/dma.h>
+#include <linux/platform_data/dma-ep93xx.h>
 #include <mach/hardware.h>
 
 #include "soc.h"
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 337ab7cf4c16..b8f53d57a299 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -35,8 +35,8 @@
 #include <sound/cs4271.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 437c34111155..7fd705b5efe4 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/sizes.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
deleted file mode 100644
index e82c642fa53c..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1		0
-#define EP93XX_DMA_I2S2		1
-#define EP93XX_DMA_AAC1		2
-#define EP93XX_DMA_AAC2		3
-#define EP93XX_DMA_AAC3		4
-#define EP93XX_DMA_I2S3		5
-#define EP93XX_DMA_UART1	6
-#define EP93XX_DMA_UART2	7
-#define EP93XX_DMA_UART3	8
-#define EP93XX_DMA_IRDA		9
-/* M2M channels */
-#define EP93XX_DMA_SSP		10
-#define EP93XX_DMA_IDE		11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels.  For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
-	int				port;
-	enum dma_transfer_direction	direction;
-	const char			*name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
-	const char			*name;
-	void __iomem			*base;
-	int				irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
-	struct ep93xx_dma_chan_data	*channels;
-	size_t				num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
-	if (!ep93xx_dma_chan_is_m2p(chan))
-		return DMA_NONE;
-
-	/* even channels are for TX, odd for RX */
-	return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
deleted file mode 100644
index 1e2f4e97f428..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE	(1<<2)	/* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE		(1<<3)	/* scan only column 0 */
-#define EP93XX_KEYPAD_KDIV		(1<<4)	/* 1/4 clock or 1/16 clock */
-#define EP93XX_KEYPAD_AUTOREPEAT	(1<<5)	/* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data:	pointer to &matrix_keymap_data
- * @debounce:		debounce start count; terminal count is 0xff
- * @prescale:		row/column counter pre-scaler load value
- * @flags:		see above
- */
-struct ep93xx_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
-	unsigned int	debounce;
-	unsigned int	prescale;
-	unsigned int	flags;
-};
-
-#define EP93XX_MATRIX_ROWS		(8)
-#define EP93XX_MATRIX_COLS		(8)
-
-#endif	/* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
deleted file mode 100644
index 9bb63ac13f04..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- *                  at least one
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
-	int	num_chipselect;
-	bool	use_dma;
-};
-
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
-	int	(*setup)(struct spi_device *spi);
-	void	(*cleanup)(struct spi_device *spi);
-	void	(*cs_control)(struct spi_device *spi, int value);
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/fb.h b/arch/arm/mach-ep93xx/include/mach/fb.h
deleted file mode 100644
index d5ae11d7c453..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/fb.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/fb.h
- */
-
-#ifndef __ASM_ARCH_EP93XXFB_H
-#define __ASM_ARCH_EP93XXFB_H
-
-struct platform_device;
-struct fb_videomode;
-struct fb_info;
-
-#define EP93XXFB_USE_MODEDB		0
-
-/* VideoAttributes flags */
-#define EP93XXFB_STATE_MACHINE_ENABLE	(1 << 0)
-#define EP93XXFB_PIXEL_CLOCK_ENABLE	(1 << 1)
-#define EP93XXFB_VSYNC_ENABLE		(1 << 2)
-#define EP93XXFB_PIXEL_DATA_ENABLE	(1 << 3)
-#define EP93XXFB_COMPOSITE_SYNC		(1 << 4)
-#define EP93XXFB_SYNC_VERT_HIGH		(1 << 5)
-#define EP93XXFB_SYNC_HORIZ_HIGH	(1 << 6)
-#define EP93XXFB_SYNC_BLANK_HIGH	(1 << 7)
-#define EP93XXFB_PCLK_FALLING		(1 << 8)
-#define EP93XXFB_ENABLE_AC		(1 << 9)
-#define EP93XXFB_ENABLE_LCD		(1 << 10)
-#define EP93XXFB_ENABLE_CCIR		(1 << 12)
-#define EP93XXFB_USE_PARALLEL_INTERFACE	(1 << 13)
-#define EP93XXFB_ENABLE_INTERRUPT	(1 << 14)
-#define EP93XXFB_USB_INTERLACE		(1 << 16)
-#define EP93XXFB_USE_EQUALIZATION	(1 << 17)
-#define EP93XXFB_USE_DOUBLE_HORZ	(1 << 18)
-#define EP93XXFB_USE_DOUBLE_VERT	(1 << 19)
-#define EP93XXFB_USE_BLANK_PIXEL	(1 << 20)
-#define EP93XXFB_USE_SDCSN0		(0 << 21)
-#define EP93XXFB_USE_SDCSN1		(1 << 21)
-#define EP93XXFB_USE_SDCSN2		(2 << 21)
-#define EP93XXFB_USE_SDCSN3		(3 << 21)
-
-#define EP93XXFB_ENABLE			(EP93XXFB_STATE_MACHINE_ENABLE	| \
-					 EP93XXFB_PIXEL_CLOCK_ENABLE	| \
-					 EP93XXFB_VSYNC_ENABLE		| \
-					 EP93XXFB_PIXEL_DATA_ENABLE)
-
-struct ep93xxfb_mach_info {
-	unsigned int			num_modes;
-	const struct fb_videomode	*modes;
-	const struct fb_videomode	*default_mode;
-	int				bpp;
-	unsigned int			flags;
-
-	int	(*setup)(struct platform_device *pdev);
-	void	(*teardown)(struct platform_device *pdev);
-	void	(*blank)(int blank_mode, struct fb_info *info);
-};
-
-#endif /* __ASM_ARCH_EP93XXFB_H */
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 33dc07917417..0eb3f17a6fa2 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -22,7 +22,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 01abd3516a77..50043eef1cf2 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -28,7 +28,7 @@
 #include <linux/mtd/nand.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 75cab2d7ec73..3c4c233391dc 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -21,7 +21,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <mach/hardware.h>
-#include <mach/ts72xx.h>
 
 #include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
@@ -29,30 +28,31 @@
 #include <asm/mach/arch.h>
 
 #include "soc.h"
+#include "ts72xx.h"
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
-		.virtual	= TS72XX_MODEL_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_MODEL_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
 		.length		= TS72XX_MODEL_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_OPTIONS_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
 		.length		= TS72XX_OPTIONS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_OPTIONS2_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
 		.length		= TS72XX_OPTIONS2_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_RTC_INDEX_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_RTC_INDEX_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE),
 		.length		= TS72XX_RTC_INDEX_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= TS72XX_RTC_DATA_VIRT_BASE,
+		.virtual	= (unsigned long)TS72XX_RTC_DATA_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
 		.length		= TS72XX_RTC_DATA_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h
index f1397a13e76b..071feaa30adc 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/ts72xx.h
@@ -14,7 +14,7 @@
  */
 
 #define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		0xfebff000
+#define TS72XX_MODEL_VIRT_BASE		IOMEM(0xfebff000)
 #define TS72XX_MODEL_SIZE		0x00001000
 
 #define TS72XX_MODEL_TS7200		0x00
@@ -26,7 +26,7 @@
 
 
 #define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
+#define TS72XX_OPTIONS_VIRT_BASE	IOMEM(0xfebfe000)
 #define TS72XX_OPTIONS_SIZE		0x00001000
 
 #define TS72XX_OPTIONS_COM2_RS485	0x02
@@ -34,18 +34,18 @@
 
 
 #define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
+#define TS72XX_OPTIONS2_VIRT_BASE	IOMEM(0xfebfd000)
 #define TS72XX_OPTIONS2_SIZE		0x00001000
 
 #define TS72XX_OPTIONS2_TS9420		0x04
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
+#define TS72XX_RTC_INDEX_VIRT_BASE	IOMEM(0xfebf9000)
 #define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
 #define TS72XX_RTC_INDEX_SIZE		0x00001000
 
-#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
+#define TS72XX_RTC_DATA_VIRT_BASE	IOMEM(0xfebf8000)
 #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
 #define TS72XX_RTC_DATA_SIZE		0x00001000
 
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 2905a4929bdc..ba92e25e3016 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -30,8 +30,8 @@
 #include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
 #include <asm/hardware/vic.h>
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index b5b4c8c9db11..4372075c551f 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -221,6 +221,7 @@ config MACH_SMDKV310
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select S3C24XX_PWM
 	help
 	  Machine support for Samsung SMDKV310
 
@@ -348,6 +349,7 @@ config MACH_ORIGEN
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select S3C24XX_PWM
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
@@ -383,6 +385,7 @@ config MACH_SMDK4212
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select S3C24XX_PWM
 	help
 	  Machine support for Samsung SMDK4212
 
@@ -405,6 +408,8 @@ config MACH_EXYNOS4_DT
 	select USE_OF
 	select ARM_AMBA
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+	select PINCTRL
+	select PINCTRL_EXYNOS4
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
 	  Select this if a fdt blob is available for the Exynos4 SoC based board.
@@ -418,8 +423,8 @@ config MACH_EXYNOS5_DT
 	select USE_OF
 	select ARM_AMBA
 	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
+	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
 
 if ARCH_EXYNOS4
 
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
index 31bd181b0514..b9862e22bf10 100644
--- a/arch/arm/mach-exynos/Makefile.boot
+++ b/arch/arm/mach-exynos/Makefile.boot
@@ -1,5 +1,2 @@
    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
-
-dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
-dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 2f51293c1875..6a45c9a9abe9 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -501,6 +501,10 @@ static struct clk exynos4_init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
+		.name		= "tsi",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
 		.name		= "hsmmc",
 		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
@@ -530,6 +534,14 @@ static struct clk exynos4_init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
+		.name		= "onenand",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "nfcon",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
 		.name		= "dac",
 		.devname	= "s5p-sdo",
 		.enable		= exynos4_clk_ip_tv_ctrl,
@@ -615,6 +627,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 21),
 	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.1",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.2",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "slimbus",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "spdif",
+		.devname	= "samsung-spdif",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
 		.name		= "ac97",
 		.devname	= "samsung-ac97",
 		.enable		= exynos4_clk_ip_peril_ctrl,
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 774533c67066..c44ca1ee1b8d 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -166,11 +166,6 @@ static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
 }
 
-static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
-}
-
 static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
@@ -552,6 +547,68 @@ static struct clksrc_clk exynos5_clk_aclk_66 = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl_mid",
+	},
+	.sources = &exynos5_clkset_aclk,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
+	[0] = &exynos5_clk_sclk_vpll.clk,
+	[1] = &exynos5_clk_mout_cpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
+	.sources	= exynos5_clkset_aclk_300_mid1_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl_mid1",
+	},
+	.sources = &exynos5_clkset_aclk_300_gscl_mid1,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
+	[0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
+	[1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
+	.sources	= exynos5_clkset_aclk_300_gscl_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl",
+	},
+	.sources = &exynos5_clkset_aclk_300_gscl,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_gscl_300_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &exynos5_clk_mout_aclk_300_gscl.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_gscl_300 = {
+	.sources	= exynos5_clk_src_gscl_300_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
+	.clk	= {
+		.name		= "aclk_300_gscl",
+	},
+	.sources = &exynos5_clk_src_gscl_300,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
+};
+
 static struct clk exynos5_init_clocks_off[] = {
 	{
 		.name		= "timers",
@@ -569,35 +626,30 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 19),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.0",
+		.name		= "biu",	/* bus interface unit clock */
+		.devname	= "dw_mmc.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.1",
+		.name		= "biu",
+		.devname	= "dw_mmc.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.2",
+		.name		= "biu",
+		.devname	= "dw_mmc.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.3",
+		.name		= "biu",
+		.devname	= "dw_mmc.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
 	}, {
-		.name		= "dwmci",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
 		.name		= "sata",
 		.devname	= "ahci",
 		.enable		= exynos5_clk_ip_fsys_ctrl,
@@ -672,10 +724,6 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
-		.name		= "gps",
-		.enable		= exynos5_clk_ip_gps_ctrl,
-		.ctrlbit	= ((1 << 3) | (1 << 2) | (1 << 0)),
-	}, {
 		.name		= "nfcon",
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 22),
@@ -764,6 +812,26 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peric_ctrl,
 		.ctrlbit	= (1 << 18),
 	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.0",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.1",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.2",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.3",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
 		.name		= SYSMMU_CLOCK_NAME,
 		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
 		.enable		= &exynos5_clk_ip_mfc_ctrl,
@@ -891,6 +959,13 @@ static struct clk exynos5_clk_mdma1 = {
 	.ctrlbit	= (1 << 4),
 };
 
+static struct clk exynos5_clk_fimd1 = {
+	.name		= "fimd",
+	.devname	= "exynos5-fb.1",
+	.enable		= exynos5_clk_ip_disp1_ctrl,
+	.ctrlbit	= (1 << 0),
+};
+
 struct clk *exynos5_clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = NULL,
@@ -1015,8 +1090,8 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.0",
+		.name		= "ciu",	/* card interface unit clock */
+		.devname	= "dw_mmc.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1026,8 +1101,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.1",
+		.name		= "ciu",
+		.devname	= "dw_mmc.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1037,8 +1112,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.2",
+		.name		= "ciu",
+		.devname	= "dw_mmc.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1048,8 +1123,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.3",
+		.name		= "ciu",
+		.devname	= "dw_mmc.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1120,27 +1195,21 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
 };
 
+struct clksrc_clk exynos5_clk_sclk_fimd1 = {
+	.clk	= {
+		.name		= "sclk_fimd",
+		.devname	= "exynos5-fb.1",
+		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+};
+
 static struct clksrc_clk exynos5_clksrcs[] = {
 	{
 		.clk	= {
-			.name		= "sclk_dwmci",
-			.parent		= &exynos5_clk_dout_mmc4.clk,
-			.enable		= exynos5_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimd",
-			.devname	= "s3cfb.1",
-			.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "aclk_266_gscl",
 		},
 		.sources = &clk_src_gscl_266,
@@ -1225,6 +1294,10 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_aclk_266,
 	&exynos5_clk_aclk_200,
 	&exynos5_clk_aclk_166,
+	&exynos5_clk_aclk_300_gscl,
+	&exynos5_clk_mout_aclk_300_gscl,
+	&exynos5_clk_mout_aclk_300_gscl_mid,
+	&exynos5_clk_mout_aclk_300_gscl_mid1,
 	&exynos5_clk_aclk_66_pre,
 	&exynos5_clk_aclk_66,
 	&exynos5_clk_dout_mmc0,
@@ -1240,12 +1313,14 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_mdout_spi0,
 	&exynos5_clk_mdout_spi1,
 	&exynos5_clk_mdout_spi2,
+	&exynos5_clk_sclk_fimd1,
 };
 
 static struct clk *exynos5_clk_cdev[] = {
 	&exynos5_clk_pdma0,
 	&exynos5_clk_pdma1,
 	&exynos5_clk_mdma1,
+	&exynos5_clk_fimd1,
 };
 
 static struct clksrc_clk *exynos5_clksrc_cdev[] = {
@@ -1274,6 +1349,7 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+	CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
 };
 
 static unsigned long exynos5_epll_get_rate(struct clk *clk)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4eb39cdf75ea..715b690e5009 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void)
 {
 	int irq;
 
+#ifdef CONFIG_PINCTRL_SAMSUNG
+	/*
+	 * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
+	 * functionality along with support for external gpio and wakeup
+	 * interrupts. If the samsung pinctrl driver is enabled and includes
+	 * the wakeup interrupt support, then the setting up external wakeup
+	 * interrupts here can be skipped. This check here is temporary to
+	 * allow exynos4 platforms that do not use Samsung pinctrl driver to
+	 * co-exist with platforms that do. When all of the Samsung Exynos4
+	 * platforms switch over to using the pinctrl driver, the wakeup
+	 * interrupt support code here can be completely removed.
+	 */
+	struct device_node *pctrl_np, *wkup_np;
+	const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
+
+	for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+		if (of_device_is_available(pctrl_np)) {
+			wkup_np = of_find_compatible_node(pctrl_np, NULL,
+							wkup_compat);
+			if (wkup_np)
+				return -ENODEV;
+		}
+	}
+#endif
+
 	if (soc_is_exynos5250())
 		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
 	else
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index aed2eeb06517..dac146df79ac 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -14,6 +14,7 @@
 
 extern struct sys_timer exynos4_timer;
 
+struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
 void exynos4_init_irq(void);
 void exynos5_init_irq(void);
@@ -59,4 +60,8 @@ void exynos4212_register_clocks(void);
 #define exynos4212_register_clocks()
 #endif
 
+extern struct smp_operations exynos_smp_ops;
+
+extern void exynos_cpu_die(unsigned int cpu);
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index b33a5b67b547..ae321c7cb15f 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
index b8e75300c77d..14ed7951a2c6 100644
--- a/arch/arm/mach-exynos/dev-ohci.c
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -15,7 +15,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <plat/devs.h>
 #include <plat/usb-phy.h>
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 9c17a0a43858..f4d7dd20cdac 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -21,7 +21,7 @@
 
 #include <mach/regs-pmu.h>
 
-extern volatile int pen_release;
+#include "common.h"
 
 static inline void cpu_enter_lowpower(void)
 {
@@ -95,17 +95,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref exynos_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
@@ -124,12 +119,3 @@ void platform_cpu_die(unsigned int cpu)
 	if (spurious)
 		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c72b675b3e4b..8480849affb9 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -89,7 +89,7 @@
 #define EXYNOS4_PA_L2CC			0x10502000
 
 #define EXYNOS4_PA_MDMA0		0x10810000
-#define EXYNOS4_PA_MDMA1		0x12840000
+#define EXYNOS4_PA_MDMA1		0x12850000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000
@@ -121,6 +121,11 @@
 #define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
 #define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
 
+#define EXYNOS5_PA_GSC0			0x13E00000
+#define EXYNOS5_PA_GSC1			0x13E10000
+#define EXYNOS5_PA_GSC2			0x13E20000
+#define EXYNOS5_PA_GSC3			0x13E30000
+
 #define EXYNOS5_PA_SYSMMU_MDMA1		0x10A40000
 #define EXYNOS5_PA_SYSMMU_SSS		0x10A50000
 #define EXYNOS5_PA_SYSMMU_2D		0x10A60000
@@ -131,7 +136,6 @@
 #define EXYNOS5_PA_SYSMMU_JPEG		0x11F20000
 #define EXYNOS5_PA_SYSMMU_IOP		0x12360000
 #define EXYNOS5_PA_SYSMMU_RTIC		0x12370000
-#define EXYNOS5_PA_SYSMMU_GPS		0x12630000
 #define EXYNOS5_PA_SYSMMU_ISP		0x13260000
 #define EXYNOS5_PA_SYSMMU_DRC		0x12370000
 #define EXYNOS5_PA_SYSMMU_SCALERC	0x13280000
@@ -173,6 +177,10 @@
 
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 #define EXYNOS4_PA_DWMCI		0x12550000
+#define EXYNOS5_PA_DWMCI0		0x12200000
+#define EXYNOS5_PA_DWMCI1		0x12210000
+#define EXYNOS5_PA_DWMCI2		0x12220000
+#define EXYNOS5_PA_DWMCI3		0x12230000
 
 #define EXYNOS4_PA_HSOTG		0x12480000
 #define EXYNOS4_PA_USB_HSPHY		0x125B0000
diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h
deleted file mode 100644
index c256c595be5e..000000000000
--- a/arch/arm/mach-exynos/include/mach/ohci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/arch/arm/mach-exynos/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h
index 998daf2add92..88a4543b0001 100644
--- a/arch/arm/mach-exynos/include/mach/sysmmu.h
+++ b/arch/arm/mach-exynos/include/mach/sysmmu.h
@@ -58,7 +58,7 @@ static inline void platform_set_sysmmu(
 #endif
 
 #else /* !CONFIG_EXYNOS_DEV_SYSMMU */
-#define platform_set_sysmmu(dev, sysmmu) do { } while (0)
+#define platform_set_sysmmu(sysmmu, dev) do { } while (0)
 #endif
 
 #define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id)
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index 5a3daa0168d8..3f37a5e8a1f4 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -199,6 +199,7 @@ static void __init armlex4210_machine_init(void)
 MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index b2b5d5faa748..e58d786faf78 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -1,5 +1,5 @@
 /*
- * Samsung's Exynos4210 flattened device tree enabled machine
+ * Samsung's EXYNOS4 flattened device tree enabled machine
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -36,7 +36,7 @@
  * at some point, the drivers should be capable of parsing all the platform
  * data from the device tree.
  */
-static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
 				"exynos4210-uart.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
@@ -55,6 +55,20 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 				"exynos4-sdhci.3", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
 				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
+				"s3c2440-i2c.2", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
+				"s3c2440-i2c.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
+				"s3c2440-i2c.4", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
+				"s3c2440-i2c.5", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
+				"s3c2440-i2c.6", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
+				"s3c2440-i2c.7", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
 				"exynos4210-spi.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
@@ -66,19 +80,19 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 	{},
 };
 
-static void __init exynos4210_dt_map_io(void)
+static void __init exynos4_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 }
 
-static void __init exynos4210_dt_machine_init(void)
+static void __init exynos4_dt_machine_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4210_auxdata_lookup, NULL);
+				exynos4_auxdata_lookup, NULL);
 }
 
-static char const *exynos4210_dt_compat[] __initdata = {
+static char const *exynos4_dt_compat[] __initdata = {
 	"samsung,exynos4210",
 	NULL
 };
@@ -86,11 +100,11 @@ static char const *exynos4210_dt_compat[] __initdata = {
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.init_irq	= exynos4_init_irq,
-	.map_io		= exynos4210_dt_map_io,
+	.map_io		= exynos4_dt_map_io,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= exynos4210_dt_machine_init,
+	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
-	.dt_compat	= exynos4210_dt_compat,
+	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ef770bc2318f..db1cd8eacf28 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -47,6 +47,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"s3c2440-i2c.0", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
 				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
+				"dw_mmc.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
+				"dw_mmc.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
+				"dw_mmc.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
+				"dw_mmc.3", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
 				"exynos4210-spi.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
@@ -56,6 +64,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
+				"exynos-gsc.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
+				"exynos-gsc.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
+				"exynos-gsc.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
+				"exynos-gsc.3", NULL),
 	{},
 };
 
@@ -79,6 +95,7 @@ static char const *exynos5250_dt_compat[] __initdata = {
 DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.init_irq	= exynos5_init_irq,
+	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos5250_dt_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos5250_dt_machine_init,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index ea785fcaf6c3..480cd78f1920 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -45,14 +45,14 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/mfc.h>
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
@@ -1383,6 +1383,7 @@ static void __init nuri_machine_init(void)
 MACHINE_START(NURI, "NURI")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5ca80307d6d7..67b50bb89c0f 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
@@ -35,15 +36,16 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>
@@ -613,6 +615,10 @@ static struct platform_device origen_lcd_hv070wsa = {
 	.dev.platform_data	= &origen_lcd_hv070wsa_data,
 };
 
+static struct pwm_lookup origen_pwm_lookup[] = {
+	PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
+};
+
 #ifdef CONFIG_DRM_EXYNOS
 static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
 	.panel	= {
@@ -734,6 +740,11 @@ static void __init origen_bt_setup(void)
 	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -781,6 +792,7 @@ static void __init origen_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
@@ -791,6 +803,7 @@ static void __init origen_machine_init(void)
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
+	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 
 	origen_bt_setup();
@@ -799,6 +812,7 @@ static void __init origen_machine_init(void)
 MACHINE_START(ORIGEN, "ORIGEN")
 	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index b26beb13ebef..7a265d1a82d3 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -17,6 +17,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
@@ -32,7 +33,7 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb.h>
@@ -222,6 +223,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+static struct pwm_lookup smdk4x12_pwm_lookup[] = {
+	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
+};
+
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
 	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
@@ -349,6 +354,7 @@ static void __init smdk4x12_machine_init(void)
 				ARRAY_SIZE(smdk4x12_i2c_devs7));
 
 	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+	pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
 
 	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
 
@@ -370,6 +376,7 @@ static void __init smdk4x12_machine_init(void)
 MACHINE_START(SMDK4212, "SMDK4212")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.handle_irq	= gic_handle_irq,
@@ -383,6 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 3cfa688d274a..c15d2238ceb0 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
@@ -34,15 +35,16 @@
 #include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"
@@ -354,6 +356,15 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
+static struct pwm_lookup smdkv310_pwm_lookup[] = {
+	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -388,10 +399,13 @@ static void __init smdkv310_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
+
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
 	exynos4_fimd0_gpio_setup_24bpp();
@@ -410,6 +424,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.handle_irq	= gic_handle_irq,
@@ -422,6 +437,7 @@ MACHINE_END
 MACHINE_START(SMDKC210, "SMDKC210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 4d1f40d44ed1..98d3aced2289 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -34,7 +34,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
@@ -43,7 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/s5p-time.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
@@ -1155,6 +1155,7 @@ static void __init universal_machine_init(void)
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 36c3984aaa47..f93d820ecab5 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,19 +32,14 @@
 
 #include <plat/cpu.h>
 
+#include "common.h"
+
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
 				S5P_INFORM5 : S5P_VA_SYSRAM)
 
 /*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-/*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
@@ -64,7 +59,7 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit exynos_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -86,7 +81,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -139,7 +134,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 		__raw_writel(virt_to_phys(exynos4_secondary_startup),
 			CPU1_BOOT_REG);
-		gic_raise_softirq(cpumask_of(cpu), 1);
+		gic_raise_softirq(cpumask_of(cpu), 0);
 
 		if (pen_release == -1)
 			break;
@@ -161,7 +156,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  * which may be present or become present in the system.
  */
 
-void __init smp_init_cpus(void)
+static void __init exynos_smp_init_cpus(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
@@ -184,7 +179,7 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	if (!soc_is_exynos5250())
 		scu_enable(scu_base_addr());
@@ -198,3 +193,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(virt_to_phys(exynos4_secondary_startup),
 			CPU1_BOOT_REG);
 }
+
+struct smp_operations exynos_smp_ops __initdata = {
+	.smp_init_cpus		= exynos_smp_init_cpus,
+	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
+	.smp_secondary_init	= exynos_secondary_init,
+	.smp_boot_secondary	= exynos_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= exynos_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 373c3c00d24c..c0bc83a7663e 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void)
 }
 #endif /* CONFIG_OF */
 
-static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
+static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
 						struct exynos_pm_domain *pd)
 {
 	if (pdev->dev.bus) {
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
index b90d94c17f7c..5700f23629f7 100644
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ b/arch/arm/mach-exynos/setup-i2c0.c
@@ -14,7 +14,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 
diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c
index fd7235a43f6e..8d2279cc85dc 100644
--- a/arch/arm/mach-exynos/setup-i2c1.c
+++ b/arch/arm/mach-exynos/setup-i2c1.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c
index 2694b19e8b37..0ed62fc42a77 100644
--- a/arch/arm/mach-exynos/setup-i2c2.c
+++ b/arch/arm/mach-exynos/setup-i2c2.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c
index 379bd306993f..7787fd26076b 100644
--- a/arch/arm/mach-exynos/setup-i2c3.c
+++ b/arch/arm/mach-exynos/setup-i2c3.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c3_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c
index 9f3c04855b76..edc847f89826 100644
--- a/arch/arm/mach-exynos/setup-i2c4.c
+++ b/arch/arm/mach-exynos/setup-i2c4.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c4_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c
index 77e1a1e57c76..d88af7f75954 100644
--- a/arch/arm/mach-exynos/setup-i2c5.c
+++ b/arch/arm/mach-exynos/setup-i2c5.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c5_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c
index 284d12b7af0e..c590286c9d3a 100644
--- a/arch/arm/mach-exynos/setup-i2c6.c
+++ b/arch/arm/mach-exynos/setup-i2c6.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c6_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c
index b7611ee359a2..1bba75568a5f 100644
--- a/arch/arm/mach-exynos/setup-i2c7.c
+++ b/arch/arm/mach-exynos/setup-i2c7.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c7_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b25946f..0b64dd430d61 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
 
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
 obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
 
 obj-$(CONFIG_PCI)	+=$(pci-y)
-obj-$(CONFIG_LEDS)	+=$(leds-y)
 
 obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 3e6aaa6361da..a42b369bc439 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
- 
+
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>
@@ -26,6 +26,7 @@
 
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
+#include <asm/mach/pci.h>
 
 #include "common.h"
 
@@ -175,11 +176,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(DC21285_PCI_IACK),
 		.length		= PCIIACK_SIZE,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCIO_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
-		.length		= PCIO_SIZE,
-		.type		= MT_DEVICE,
 	},
 #endif
 };
@@ -196,8 +192,10 @@ void __init footbridge_map_io(void)
 	 * Now, work out what we've got to map in addition on this
 	 * platform.
 	 */
-	if (footbridge_cfn_mode())
+	if (footbridge_cfn_mode()) {
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
+	}
 }
 
 void footbridge_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 9d62e3381024..a7cd2cf5e08d 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -276,8 +276,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 
 	sys->mem_offset  = DC21285_PCI_MEM;
 
-	pci_add_resource_offset(&sys->resources,
-				&ioport_resource, sys->io_offset);
+	pci_ioremap_io(0, DC21285_PCI_IO);
+
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
@@ -298,7 +298,7 @@ void __init dc21285_preinit(void)
 	mem_size = (unsigned int)high_memory - PAGE_OFFSET;
 	for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
 		if (mem_mask >= mem_size)
-			break;		
+			break;
 
 	/*
 	 * These registers need to be set up whether we're the
@@ -350,14 +350,6 @@ void __init dc21285_preinit(void)
 			    "PCI data parity", NULL);
 
 	if (cfn_mode) {
-		static struct resource csrio;
-
-		csrio.flags  = IORESOURCE_IO;
-		csrio.name   = "Footbridge";
-
-		allocate_resource(&ioport_resource, &csrio, 128,
-				  0xff00, 0xffff, 128, NULL, NULL);
-
 		/*
 		 * Map our SDRAM at a known address in PCI space, just in case
 		 * the firmware had other ideas.  Using a nonzero base is
@@ -365,7 +357,7 @@ void __init dc21285_preinit(void)
 		 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
 		 */
 		*CSR_PCICSRBASE       = 0xf4000000;
-		*CSR_PCICSRIOBASE     = csrio.start;
+		*CSR_PCICSRIOBASE     = 0;
 		*CSR_PCISDRAMBASE     = __virt_to_bus(PAGE_OFFSET);
 		*CSR_PCIROMBASE       = 0;
 		*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 5bd266754b95..000000000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Amber - On if system is not idle
- *  - Red   - currently unused
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
-		hw_led_state |= XBUS_LED_AMBER;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= XBUS_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		*XBUS_LEDS = hw_led_state;
-
-	spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_ebsa285())
-		leds_event = ebsa285_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 27716a7e5fc1..b09551ef89ca 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
  */
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>
@@ -13,6 +15,85 @@
 
 #include "common.h"
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct ebsa285_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} ebsa285_leds[] = {
+	{ "ebsa285:amber", "heartbeat", },
+	{ "ebsa285:green", "cpu0", },
+	{ "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct ebsa285_led *led = container_of(cdev,
+			struct ebsa285_led, cdev);
+
+	if (b != LED_OFF)
+		*XBUS_LEDS |= led->mask;
+	else
+		*XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+	struct ebsa285_led *led = container_of(cdev,
+			struct ebsa285_led, cdev);
+
+	return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+	int i;
+
+	if (machine_is_ebsa285())
+		return -ENODEV;
+
+	/* 3 LEDS All ON */
+	*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+	for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+		struct ebsa285_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = ebsa285_leds[i].name;
+		led->cdev.brightness_set = ebsa285_led_set;
+		led->cdev.brightness_get = ebsa285_led_get;
+		led->cdev.default_trigger = ebsa285_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+#endif
+
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index e5acde25ffc5..c169f0c99b2a 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -17,7 +17,8 @@
 	/* For NetWinder debugging */
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #0x000003f8
-		orr	\rv, \rp, #0xff000000	@ virtual
+		orr	\rv, \rp, #0xfe000000	@ virtual
+		orr	\rv, \rv, #0x00e00000	@ virtual
 		orr	\rp, \rp, #0x7c000000	@ physical
 		.endm
 
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
index aba531eebbc6..aba46388cc0c 100644
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -14,18 +14,10 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
-#define PCIO_SIZE       0x00100000
-#define PCIO_BASE       MMU_IO(0xff000000, 0x7c000000)
-
 /*
- * Translation of various region addresses to virtual addresses
+ * Translation of various i/o addresses to host addresses for !CONFIG_MMU
  */
+#define PCIO_BASE       0x7c000000
 #define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
 
 #endif
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index cac9f67e7da7..d2d14339c6c4 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/system_misc.h>
@@ -27,13 +28,6 @@
 #define GP1_IO_BASE		0x338
 #define GP2_IO_BASE		0x33a
 
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS	0
-#else
-#define DEFAULT_LEDS	GPIO_GREEN_LED
-#endif
-
 /*
  * Winbond WB83977F accessibility stuff
  */
@@ -611,15 +605,9 @@ static void __init rwa010_init(void)
 static int __init nw_hw_init(void)
 {
 	if (machine_is_netwinder()) {
-		unsigned long flags;
-
 		wb977_init();
 		cpld_init();
 		rwa010_init();
-
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 	return 0;
 }
@@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd)
 	}
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct netwinder_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} netwinder_leds[] = {
+	{ "netwinder:green", "heartbeat", },
+	{ "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ *  - setting bit means turn off LED
+ *  - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct netwinder_led *led = container_of(cdev,
+			struct netwinder_led, cdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	reg = nw_gpio_read();
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	nw_gpio_modify_op(led->mask, reg);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+	struct netwinder_led *led = container_of(cdev,
+			struct netwinder_led, cdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	reg = nw_gpio_read();
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_netwinder())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+		struct netwinder_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = netwinder_leds[i].name;
+		led->cdev.brightness_set = netwinder_led_set;
+		led->cdev.brightness_get = netwinder_led_get;
+		led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+		if (i == 0)
+			led->mask = GPIO_GREEN_LED;
+		else
+			led->mask = GPIO_RED_LED;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+#endif
+
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 5a2bd89cbdca..000000000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Red   - On if the system is not idle
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = GPIO_GREEN_LED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= GPIO_GREEN_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_GREEN_LED;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-
-	if  (led_state & LED_STATE_ENABLED) {
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-	}
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_netwinder())
-		leds_event = netwinder_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index ca70e5fcc7ac..020852d3bdd8 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 #include <mach/hardware.h>
 
 #define IRQ_SOURCE(base_addr)	(base_addr + 0x00)
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
new file mode 100644
index 000000000000..0e1d0a42a3ea
--- /dev/null
+++ b/arch/arm/mach-highbank/Kconfig
@@ -0,0 +1,15 @@
+config ARCH_HIGHBANK
+	bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select CACHE_L2X0
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU
+	select HAVE_SMP
+	select SPARSE_IRQ
+	select USE_OF
diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot
deleted file mode 100644
index dae9661a7689..000000000000
--- a/arch/arm/mach-highbank/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y	:= 0x00008000
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 141ed5171826..286ec82a4f63 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,4 +8,13 @@ extern void highbank_lluart_map_io(void);
 static inline void highbank_lluart_map_io(void) {}
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+extern void highbank_pm_init(void);
+#else
+static inline void highbank_pm_init(void) {}
+#endif
+
 extern void highbank_smc1(int fn, int arg);
+extern void highbank_cpu_die(unsigned int cpu);
+
+extern struct smp_operations highbank_smp_ops;
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index d75b0a78d88a..40e36a50304c 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -15,6 +15,7 @@
  */
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
@@ -23,6 +24,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
+#include <linux/amba/bus.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -149,9 +151,60 @@ static void highbank_power_off(void)
 		cpu_do_idle();
 }
 
+static int highbank_platform_notifier(struct notifier_block *nb,
+				  unsigned long event, void *__dev)
+{
+	struct resource *res;
+	int reg = -1;
+	struct device *dev = __dev;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+
+	if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci"))
+		reg = 0xc;
+	else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci"))
+		reg = 0x18;
+	else if (of_device_is_compatible(dev->of_node, "arm,pl330"))
+		reg = 0x20;
+	else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) {
+		res = platform_get_resource(to_platform_device(dev),
+					    IORESOURCE_MEM, 0);
+		if (res) {
+			if (res->start == 0xfff50000)
+				reg = 0;
+			else if (res->start == 0xfff51000)
+				reg = 4;
+		}
+	}
+
+	if (reg < 0)
+		return NOTIFY_DONE;
+
+	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
+		writel(0xff31, sregs_base + reg);
+		set_dma_ops(dev, &arm_coherent_dma_ops);
+	} else
+		writel(0, sregs_base + reg);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block highbank_amba_nb = {
+	.notifier_call = highbank_platform_notifier,
+};
+
+static struct notifier_block highbank_platform_nb = {
+	.notifier_call = highbank_platform_notifier,
+};
+
 static void __init highbank_init(void)
 {
 	pm_power_off = highbank_power_off;
+	highbank_pm_init();
+
+	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
+	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
@@ -162,6 +215,7 @@ static const char *highbank_match[] __initconst = {
 };
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
+	.smp		= smp_ops(highbank_smp_ops),
 	.map_io		= highbank_map_io,
 	.init_irq	= highbank_init_irq,
 	.timer		= &highbank_timer,
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index 977cebbea580..2c1b8c3c8e45 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -24,16 +24,11 @@
 
 extern void secondary_startup(void);
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref highbank_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
@@ -45,12 +40,3 @@ void platform_cpu_die(unsigned int cpu)
 	/* We should never return from idle */
 	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * CPU0 should not be shut down via hotplug.  cpu_idle can WFI
-	 * or a proper shutdown or hibernate should be used.
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-highbank/include/mach/gpio.h b/arch/arm/mach-highbank/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-highbank/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
deleted file mode 100644
index 88dac7a55a97..000000000000
--- a/arch/arm/mach-highbank/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h
deleted file mode 100644
index bbe20e696325..000000000000
--- a/arch/arm/mach-highbank/include/mach/uncompress.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index d01364c72b45..fa9560ec6e70 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -25,12 +25,12 @@
 
 extern void secondary_startup(void);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit highbank_secondary_init(unsigned int cpu)
 {
 	gic_secondary_init(0);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
@@ -40,7 +40,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init highbank_smp_init_cpus(void)
 {
 	unsigned int i, ncores;
 
@@ -61,7 +61,7 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
@@ -76,3 +76,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 1; i < max_cpus; i++)
 		highbank_set_cpu_jump(i, secondary_startup);
 }
+
+struct smp_operations highbank_smp_ops __initdata = {
+	.smp_init_cpus		= highbank_smp_init_cpus,
+	.smp_prepare_cpus	= highbank_smp_prepare_cpus,
+	.smp_secondary_init	= highbank_secondary_init,
+	.smp_boot_secondary	= highbank_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= highbank_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 33b3beb89982..de866f21331f 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -47,9 +47,7 @@ static const struct platform_suspend_ops highbank_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init highbank_pm_init(void)
+void __init highbank_pm_init(void)
 {
 	suspend_set_ops(&highbank_pm_ops);
-	return 0;
 }
-module_init(highbank_pm_init);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index afd542ad6f97..32197c117afe 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -101,13 +101,8 @@ config	SOC_IMX51
 	select SOC_IMX5
 	select ARCH_MX5
 	select ARCH_MX51
-
-config	SOC_IMX53
-	bool
-	select SOC_IMX5
-	select ARCH_MX5
-	select ARCH_MX53
-	select HAVE_CAN_FLEXCAN if CAN
+	select PINCTRL
+	select PINCTRL_IMX51
 
 if ARCH_IMX_V4_V5
 
@@ -303,6 +298,7 @@ config MACH_MX27_3DS
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MX2_CAMERA
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -561,7 +557,6 @@ config MACH_BUG
 config MACH_IMX31_DT
 	bool "Support i.MX31 platforms from device tree"
 	select SOC_IMX31
-	select USE_OF
 	help
 	  Include support for Freescale i.MX31 based platforms
 	  using the device tree for discovery.
@@ -737,95 +732,19 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
 
 endchoice
 
-config MX51_EFIKA_COMMON
-	bool
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_PATA_IMX
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+comment "Device tree only"
 
-config MACH_MX51_EFIKAMX
-	bool "Support MX51 Genesi Efika MX nettop"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika MX nettop. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
-	bool "Support MX51 Genesi Efika Smartbook"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika Smartbook. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
-	bool "Support i.MX53 platforms from device tree"
-	select SOC_IMX53
-	select MACH_MX53_ARD
-	select MACH_MX53_EVK
-	select MACH_MX53_LOCO
-	select MACH_MX53_SMD
-	help
-	  Include support for Freescale i.MX53 based platforms
-	  using the device tree for discovery
-
-config MACH_MX53_EVK
-	bool "Support MX53 EVK platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
-	bool "Support MX53 SMD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX53 SMD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
-	bool "Support MX53 LOCO platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 LOCO platform. This includes specific
-	  configurations for the board and its peripherals.
+config	SOC_IMX53
+	bool "i.MX53 support"
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX53
+	select HAVE_CAN_FLEXCAN if CAN
+	select PINCTRL
+	select PINCTRL_IMX53
 
-config MACH_MX53_ARD
-	bool "Support MX53 ARD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	help
-	  Include support for MX53 ARD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
+	  This enables support for Freescale i.MX53 processor.
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
@@ -839,7 +758,7 @@ config SOC_IMX6Q
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
-	select MFD_ANATOP
+	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_IMX6Q
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 07f7c226e4cf..895754aeb4f3 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,10 +9,11 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
-			    clk-pfd.o clk-busy.o
+			    clk-pfd.o clk-busy.o clk.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -70,29 +71,21 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
 obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 05541cf4a878..b27815de8473 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -37,10 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
-			       imx53-qsb.dtb imx53-smd.dtb
-dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb \
-			   imx6q-sabrelite.dtb \
-			   imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index ea13e61bd5f3..cf65148bc519 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -23,7 +23,6 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/clkdev.h>
 #include <linux/err.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index fdd8cc87c9fe..d20d4795f4ea 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -222,10 +222,8 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
@@ -243,6 +241,6 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
 	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
 
-	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 7aa6313fb167..3b6b640eed24 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
-	clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
 	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -239,8 +239,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
-	clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu");
-	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu");
+	clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
+	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
 	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
 	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
 	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
@@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
 	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
-	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
-	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
 	clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
 	clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
 	clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8e19e70f90f9..1253af2d9971 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
-	clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index c6422fb10bae..177259b523cd 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -62,8 +62,8 @@ enum mx35_clks {
 	kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
 	rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
 	ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
-	wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
-	clk_max
+	wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
+	gpu2d_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -142,6 +142,9 @@ int __init mx35_clocks_init()
 
 	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
 
+	clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
+
 	clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0,  0);
 	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0,  2);
 	clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0,  4);
@@ -192,7 +195,7 @@ int __init mx35_clocks_init()
 	clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
 	clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
 
-	clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3,  0);
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3,  0);
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3,  2);
 	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3,  4);
 
@@ -228,12 +231,11 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
 	/* i.mx35 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
@@ -255,6 +257,7 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 
 	clk_prepare_enable(clk[spba_gate]);
 	clk_prepare_enable(clk[gpio1_gate]);
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index f6086693ebd2..e5165a84f93f 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -39,16 +39,17 @@ static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
 static const char *emi_slow_sel[] = { "main_bus", "ahb", };
 static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
 static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
-static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
 static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
 static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
-static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
 static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
 static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
 static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
 static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
 static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
 static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
 
 enum imx5_clks {
 	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
@@ -82,6 +83,7 @@ enum imx5_clks {
 	ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
 	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
+	can_sel, can1_serial_gate, can1_ipg_gate,
 	clk_max
 };
 
@@ -303,6 +305,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_prepare_enable(clk[aips_tz2]); /* fec */
 	clk_prepare_enable(clk[spba]);
 	clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+	clk_prepare_enable(clk[emi_slow_gate]); /* eim */
 	clk_prepare_enable(clk[tmax1]);
 	clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
 	clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
@@ -420,8 +423,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
 	clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
 	clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
-	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
-	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
+	clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
+				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
+	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
+	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
+	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
@@ -454,6 +461,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+	clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can");
+	clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can");
+	clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can");
+	clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can");
 
 	/* set SDHC root clock to 200MHZ*/
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ea89520b6e22..3ec242f3341e 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -152,11 +152,12 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
 
 static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
 	mmdc_ch0_axi, rom,
@@ -288,8 +289,10 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
@@ -392,52 +395,24 @@ int __init mx6q_clocks_init(void)
 			pr_err("i.MX6q clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[twd], NULL, "smp_twd");
-	clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
-	clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
-	clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
-	clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
-	clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
-	clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
-	clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
-	clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
-	clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
-	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
-	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
-	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
-	clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
-	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
-	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
-	clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
-	clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
-	clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
-	clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
-	clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
-	clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
-	clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
-	clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
-	clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
-	clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
-	clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
-	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
-	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
-	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
+	/*
+	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+	 * We can not get the 100MHz from the pll2_pfd0_352m.
+	 * So choose pll2_pfd2_396m as enfc_sel's parent.
+	 */
+	clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
index 2d856f9ccf59..02be73178912 100644
--- a/arch/arm/mach-imx/clk-pllv1.c
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -6,7 +6,7 @@
 #include <linux/err.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/clock.h>
+
 #include "clk.h"
 
 /**
@@ -29,8 +29,53 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
 	struct clk_pllv1 *pll = to_clk_pllv1(hw);
+	long long ll;
+	int mfn_abs;
+	unsigned int mfi, mfn, mfd, pd;
+	u32 reg;
+	unsigned long rate;
+
+	reg = readl(pll->base);
+
+	/*
+	 * Get the resulting clock rate from a PLL register value and the input
+	 * frequency. PLLs with this register layout can be found on i.MX1,
+	 * i.MX21, i.MX27 and i,MX31
+	 *
+	 *                  mfi + mfn / (mfd + 1)
+	 *  f = 2 * f_ref * --------------------
+	 *                        pd + 1
+	 */
+
+	mfi = (reg >> 10) & 0xf;
+	mfn = reg & 0x3ff;
+	mfd = (reg >> 16) & 0x3ff;
+	pd =  (reg >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	mfn_abs = mfn;
+
+	/*
+	 * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
+
+	rate = parent_rate * 2;
+	rate /= pd + 1;
+
+	ll = (unsigned long long)rate * mfn_abs;
+
+	do_div(ll, mfd + 1);
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		ll = -ll;
+
+	ll = (rate * mfi) + ll;
 
-	return mxc_decode_pll(readl(pll->base), parent_rate);
+	return ll;
 }
 
 struct clk_ops clk_pllv1_ops = {
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
new file mode 100644
index 000000000000..f5e8be8e7f11
--- /dev/null
+++ b/arch/arm/mach-imx/clk.c
@@ -0,0 +1,3 @@
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(imx_ccm_lock);
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 1bf64fe2523c..5f2d8acca25f 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -3,7 +3,8 @@
 
 #include <linux/spinlock.h>
 #include <linux/clk-provider.h>
-#include <mach/clock.h>
+
+extern spinlock_t imx_ccm_lock;
 
 struct clk *imx_clk_pllv1(const char *name, const char *parent,
 		void __iomem *base);
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 436c5720fe6a..04822932cdd1 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -17,6 +17,10 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
 #define imx27_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
 
+extern const struct imx_imx27_coda_data imx27_coda_data;
+#define imx27_add_coda()	\
+	imx_add_imx27_coda(&imx27_coda_data)
+
 extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
 #define imx27_add_imx2_wdt()	\
 	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
deleted file mode 100644
index 77e0db96c448..000000000000
--- a/arch/arm/mach-imx/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata)   \
-	imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id)	\
-	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
-	imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h
deleted file mode 100644
index 014aa985faae..000000000000
--- a/arch/arm/mach-imx/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN		IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET	IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET	IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 05bb41d99728..412c583a24b0 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
index fa69419eabdd..cd6e1f81508d 100644
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
index faad0f15ac7f..9a880c78af34 100644
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 73574c30cf50..779e16eb65cb 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
index a6a4afb0ad62..cf8d00e5cce1 100644
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 
 #define MXC_OTG_OFFSET			0
 #define MXC_H1_OFFSET			0x200
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S
index 7e49deb128a4..7e49deb128a4 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/headsmp.S
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 20ed2d56c1af..b07b778dc9a8 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -15,11 +15,6 @@
 #include <asm/cp15.h>
 #include <mach/common.h>
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -42,43 +37,17 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index d4067fe36357..f233b4bb2342 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -44,27 +43,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
-	{ /* sentinel */ }
-};
-
 static void __init imx51_dt_init(void)
 {
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	pinctrl_provide_dummies();
-
-	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx51_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     imx51_auxdata_lookup, NULL);
 }
@@ -79,7 +59,6 @@ static struct sys_timer imx51_timer = {
 };
 
 static const char *imx51_dt_board_compat[] __initdata = {
-	"fsl,imx51-babbage",
 	"fsl,imx51",
 	NULL
 };
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 2c6ab3273f9e..5985ed1b8c98 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
-	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+	__raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
+					(1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
 
 	/* RTC */
 	/* Get RTC IRQ and register the chip */
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f264ddddd47c..821d6aac411c 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -32,13 +32,13 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/leds.h>
-#include <linux/memblock.h>
 #include <media/soc_camera.h>
 #include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/system_info.h>
+#include <asm/memblock.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
@@ -233,10 +233,8 @@ static void __init visstrim_camera_init(void)
 static void __init visstrim_reserve(void)
 {
 	/* reserve 4 MiB for mx2-camera */
-	mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE,
+	mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
 			MX2_CAMERA_BUF_SIZE);
-	memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
-	memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
 }
 
 /* GPIOs used as events for applications */
@@ -405,6 +403,47 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
 	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
+/* coda */
+
+static void __init visstrim_coda_init(void)
+{
+	struct platform_device *pdev;
+	int dma;
+
+	pdev = imx27_add_coda();
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					  mx2_camera_base + MX2_CAMERA_BUF_SIZE,
+					  mx2_camera_base + MX2_CAMERA_BUF_SIZE,
+					  MX2_CAMERA_BUF_SIZE,
+					  DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		return;
+}
+
+/* DMA deinterlace */
+static struct platform_device visstrim_deinterlace = {
+	.name = "m2m-deinterlace",
+	.id = 0,
+};
+
+static void __init visstrim_deinterlace_init(void)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev = &visstrim_deinterlace;
+	int dma;
+
+	ret = platform_device_register(pdev);
+
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					  mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
+					  mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
+					  MX2_CAMERA_BUF_SIZE,
+					  DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		return;
+}
+
+
 static void __init visstrim_m10_revision(void)
 {
 	int exp_version = 0;
@@ -467,7 +506,9 @@ static void __init visstrim_m10_board_init(void)
 	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
 				      &iclink_tvp5150, sizeof(iclink_tvp5150));
 	gpio_led_register_device(0, &visstrim_m10_led_data);
+	visstrim_deinterlace_init();
 	visstrim_camera_init();
+	visstrim_coda_init();
 }
 
 static void __init visstrim_m10_timer_init(void)
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c
index 1b7a2fc36591..29711e95579f 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -17,7 +17,6 @@
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -51,14 +50,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
-	{ /* sentinel */ }
-};
-
 static void __init imx53_qsb_init(void)
 {
 	struct clk *clk;
@@ -74,20 +65,6 @@ static void __init imx53_qsb_init(void)
 
 static void __init imx53_dt_init(void)
 {
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	pinctrl_provide_dummies();
-
-	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx53_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
 	if (of_machine_is_compatible("fsl,imx53-qsb"))
 		imx53_qsb_init();
 
@@ -105,10 +82,6 @@ static struct sys_timer imx53_timer = {
 };
 
 static const char *imx53_dt_board_compat[] __initdata = {
-	"fsl,imx53-ard",
-	"fsl,imx53-evk",
-	"fsl,imx53-qsb",
-	"fsl,imx53-smd",
 	"fsl,imx53",
 	NULL
 };
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5ec0608f2a76..47c91f7185d2 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -22,10 +22,10 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <linux/phy.h>
+#include <linux/regmap.h>
 #include <linux/micrel_phy.h>
-#include <linux/mfd/anatop.h>
+#include <linux/mfd/syscon.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -71,7 +71,7 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -100,7 +100,6 @@ static void __init imx6q_sabrelite_cko1_setup(void)
 	clk_set_parent(cko1_sel, ahb);
 	rate = clk_round_rate(cko1, 16000000);
 	clk_set_rate(cko1, rate);
-	clk_register_clkdev(cko1, NULL, "0-000a");
 put_clk:
 	if (!IS_ERR(cko1_sel))
 		clk_put(cko1_sel);
@@ -112,7 +111,7 @@ put_clk:
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();
@@ -120,20 +119,7 @@ static void __init imx6q_sabrelite_init(void)
 
 static void __init imx6q_usb_init(void)
 {
-	struct device_node *np;
-	struct platform_device *pdev = NULL;
-	struct anatop *adata = NULL;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
-	if (np)
-		pdev = of_find_device_by_node(np);
-	if (pdev)
-		adata = platform_get_drvdata(pdev);
-	if (!adata) {
-		if (np)
-			of_node_put(np);
-		return;
-	}
+	struct regmap *anatop;
 
 #define HW_ANADIG_USB1_CHRG_DETECT		0x000001b0
 #define HW_ANADIG_USB2_CHRG_DETECT		0x00000210
@@ -141,30 +127,25 @@ static void __init imx6q_usb_init(void)
 #define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x00100000
 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x00080000
 
-	/*
-	 * The external charger detector needs to be disabled,
-	 * or the signal at DP will be poor
-	 */
-	anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT,
-			BM_ANADIG_USB_CHRG_DETECT_EN_B
-			| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
-			~0);
-	anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT,
-			BM_ANADIG_USB_CHRG_DETECT_EN_B |
-			BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
-			~0);
-
-	of_node_put(np);
+	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+	if (!IS_ERR(anatop)) {
+		/*
+		 * The external charger detector needs to be disabled,
+		 * or the signal at DP will be poor
+		 */
+		regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
+				BM_ANADIG_USB_CHRG_DETECT_EN_B
+				| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+		regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
+				BM_ANADIG_USB_CHRG_DETECT_EN_B |
+				BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+	} else {
+		pr_warn("failed to find fsl,imx6q-anatop regmap\n");
+	}
 }
 
 static void __init imx6q_init_machine(void)
 {
-	/*
-	 * This should be removed when all imx6q boards have pinctrl
-	 * states for devices defined in device tree.
-	 */
-	pinctrl_provide_dummies();
-
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
 		imx6q_sabrelite_init();
 
@@ -218,14 +199,12 @@ static struct sys_timer imx6q_timer = {
 };
 
 static const char *imx6q_dt_compat[] __initdata = {
-	"fsl,imx6q-arm2",
-	"fsl,imx6q-sabrelite",
-	"fsl,imx6q-sabresd",
 	"fsl,imx6q",
 	NULL,
 };
 
 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
 	.handle_irq	= imx6q_handle_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 5d08533ab2c7..0330078ff788 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,7 +36,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
@@ -259,13 +258,13 @@ static void __init kzm_board_init(void)
  */
 static struct map_desc kzm_io_desc[] __initdata = {
 	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.virtual	= (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
 		.length		= MX31_CS4_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.virtual	= (unsigned long)MX31_CS5_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
 		.length		= MX31_CS5_SIZE,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 58c24c1a7ab7..05996f39005c 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -158,6 +158,11 @@ static const int mx27pdk_pins[] __initconst = {
 	PB21_PF_CSI_HSYNC,
 	CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
 	CSI_RESET | GPIO_GPIO | GPIO_OUT,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
 };
 
 static struct gpio mx27_3ds_camera_gpios[] = {
@@ -329,13 +334,24 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 };
 
 /* MC13783 */
+static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
+	.dac_ssi_port = MC13783_SSI1_PORT,
+	.adc_ssi_port = MC13783_SSI1_PORT,
+};
+
 static struct mc13xxx_platform_data mc13783_pdata = {
 	.regulators = {
 		.regulators = mx27_3ds_regulators,
 		.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
 
 	},
-	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
+	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
+						MC13XXX_USE_CODEC,
+	.codec = &mx27_3ds_codec,
+};
+
+static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_NET,
 };
 
 /* SPI */
@@ -512,6 +528,9 @@ static void __init mx27pdk_init(void)
 	}
 
 	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
+	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
 
 static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index d37f4809c556..e774b07f48d3 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -540,7 +540,7 @@ static void __init mxc_init_audio(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.virtual	= (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
 		.length		= CS4_CS8900_MMIO_START,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index c8785b39eaed..ef57cff5abfb 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -207,7 +207,7 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
 		.length = MX31_CS4_SIZE,
 		.type = MT_DEVICE
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index d46290b288ed..459e754ef8c9 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -47,7 +47,7 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ulpi.h>
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 
 #include "devices-imx31.h"
 
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
deleted file mode 100644
index 8d09c0126cab..000000000000
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1		IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2		IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED	IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED	IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED		IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY	IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1	IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET		IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF	IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2	IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
-	/* board id */
-	MX51_PAD_PCBID0,
-	MX51_PAD_PCBID1,
-	MX51_PAD_PCBID2,
-
-	/* leds */
-	MX51_PAD_CSI1_D9__GPIO3_13,
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-	MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
-	/* power key */
-	MX51_PAD_PWRKEY,
-
-	/* reset */
-	MX51_PAD_DI1_PIN13__GPIO3_2,
-	MX51_PAD_GPIO1_4__GPIO1_4,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/*   PCBID2  PCBID1 PCBID0  STATE
-	1       1      1    ER1:rev1.1
-	1       1      0    ER2:rev1.2
-	1       0      1    ER3:rev1.3
-	1       0      0    ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
-	int id;
-
-	/* things are taking time to settle */
-	msleep(150);
-
-	gpio_request(EFIKAMX_PCBID0, "pcbid0");
-	gpio_direction_input(EFIKAMX_PCBID0);
-	gpio_request(EFIKAMX_PCBID1, "pcbid1");
-	gpio_direction_input(EFIKAMX_PCBID1);
-	gpio_request(EFIKAMX_PCBID2, "pcbid2");
-	gpio_direction_input(EFIKAMX_PCBID2);
-
-	id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
-	id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
-	switch (id) {
-	case 7:
-		system_rev = 0x11;
-		break;
-	case 6:
-		system_rev = 0x12;
-		break;
-	case 5:
-		system_rev = 0x13;
-		break;
-	case 4:
-		system_rev = 0x14;
-		break;
-	default:
-		system_rev = 0x10;
-		break;
-	}
-
-	if ((system_rev == 0x10)
-		|| (system_rev == 0x12)
-		|| (system_rev == 0x14)) {
-		printk(KERN_WARNING
-			"EfikaMX: Unsupported board revision 1.%u!\n",
-			system_rev & 0xf);
-	}
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
-	{
-		.name = "efikamx:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKAMX_GREEN_LED,
-	},
-	{
-		.name = "efikamx:red",
-		.default_trigger = "ide-disk",
-		.gpio = EFIKAMX_RED_LED,
-	},
-	{
-		.name = "efikamx:blue",
-		.default_trigger = "mmc0",
-		.gpio = EFIKAMX_BLUE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikamx_leds_data __initconst = {
-	.leds = mx51_efikamx_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKAMX_POWER_KEY,
-		.type = EV_PWR,
-		.desc = "Power Button (CM)",
-		.wakeup = 1,
-		.debounce_interval = 10, /* ms */
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
-	.buttons = mx51_efikamx_powerkey,
-	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
-	if (system_rev == 0x11)
-		gpio_direction_output(EFIKAMX_RESET1_1, 0);
-	else
-		gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
-	if (!IS_ERR(coincell))
-		regulator_disable(coincell);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
-	pwgt1 = regulator_get(NULL, "pwgt1");
-	pwgt2 = regulator_get(NULL, "pwgt2");
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_enable(pwgt1);
-		regulator_enable(pwgt2);
-	}
-	gpio_request(EFIKAMX_POWEROFF, "poweroff");
-	pm_power_off = mx51_efikamx_power_off;
-
-	/* enable coincell charger. maybe need a small power driver ? */
-	coincell = regulator_get(NULL, "coincell");
-	if (!IS_ERR(coincell)) {
-		regulator_set_voltage(coincell, 3000000, 3000000);
-		regulator_enable(coincell);
-	}
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static void __init mx51_efikamx_init_late(void)
-{
-	imx51_init_late();
-	mx51_efikamx_power_init();
-}
-
-static void __init mx51_efikamx_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
-					ARRAY_SIZE(mx51efikamx_pads));
-	efika_board_common_init();
-
-	mx51_efikamx_board_id();
-
-	/* on < 1.2 boards both SD controllers are used */
-	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(0, NULL);
-		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
-		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	} else
-		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
-	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
-	if (system_rev == 0x11) {
-		gpio_request(EFIKAMX_RESET1_1, "reset");
-		gpio_direction_output(EFIKAMX_RESET1_1, 1);
-	} else {
-		gpio_request(EFIKAMX_RESET, "reset");
-		gpio_direction_output(EFIKAMX_RESET, 1);
-	}
-
-	/*
-	 * enable wifi by default only on mx
-	 * sb and mx have same wlan pin but the value to enable it are
-	 * different :/
-	 */
-	gpio_request(EFIKA_WLAN_EN, "wlan_en");
-	gpio_direction_output(EFIKA_WLAN_EN, 0);
-	msleep(10);
-
-	gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
-	gpio_direction_output(EFIKA_WLAN_RESET, 0);
-	msleep(10);
-	gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
-	.init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_efikamx_timer,
-	.init_machine = mx51_efikamx_init,
-	.init_late = mx51_efikamx_init_late,
-	.restart = mx51_efikamx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
deleted file mode 100644
index fdbd181b97ef..000000000000
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED	IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED	IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0		IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1		IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY		IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID		IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF	IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
-	/* USB HOST2 */
-	MX51_PAD_EIM_D16__USBH2_DATA0,
-	MX51_PAD_EIM_D17__USBH2_DATA1,
-	MX51_PAD_EIM_D18__USBH2_DATA2,
-	MX51_PAD_EIM_D19__USBH2_DATA3,
-	MX51_PAD_EIM_D20__USBH2_DATA4,
-	MX51_PAD_EIM_D21__USBH2_DATA5,
-	MX51_PAD_EIM_D22__USBH2_DATA6,
-	MX51_PAD_EIM_D23__USBH2_DATA7,
-	MX51_PAD_EIM_A24__USBH2_CLK,
-	MX51_PAD_EIM_A25__USBH2_DIR,
-	MX51_PAD_EIM_A26__USBH2_STP,
-	MX51_PAD_EIM_A27__USBH2_NXT,
-
-	/* leds */
-	MX51_PAD_EIM_CS0__GPIO2_25,
-	MX51_PAD_GPIO1_3__GPIO1_3,
-
-	/* pcb id */
-	MX51_PAD_EIM_CS3__GPIO2_28,
-	MX51_PAD_EIM_CS4__GPIO2_29,
-
-	/* lid */
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
-	/* power key*/
-	MX51_PAD_PWRKEY,
-
-	/* wifi/bt button */
-	MX51_PAD_DI1_PIN12__GPIO3_1,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
-	/* wdog reset */
-	MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
-	/* BT */
-	MX51_PAD_EIM_A17__GPIO2_11,
-
-	MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
-	iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
-	mxc_iomux_v3_setup_pad(usbh2gpio);
-	gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
-	gpio_direction_output(EFIKASB_USBH2_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKASB_USBH2_STP, 1);
-	msleep(1);
-
-	gpio_free(EFIKASB_USBH2_STP);
-	mxc_iomux_v3_setup_pad(usbh2stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
-	.init   = initialize_usbh2_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
-	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-	if (usbh2_config.otg)
-		imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
-	{
-		.name = "efikasb:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKASB_GREEN_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "efikasb:white",
-		.default_trigger = "caps",
-		.gpio = EFIKASB_WHITE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikasb_leds_data __initconst = {
-	.leds = mx51_efikasb_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKASB_PWRKEY,
-		.type = EV_KEY,
-		.desc = "Power Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-	{
-		.code = SW_LID,
-		.gpio = EFIKASB_LID,
-		.type = EV_SW,
-		.desc = "Lid Switch",
-		.active_low = 1,
-	},
-	{
-		.code = KEY_RFKILL,
-		.gpio = EFIKASB_RFKILL,
-		.type = EV_KEY,
-		.desc = "rfkill",
-		.active_low = 1,
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
-	.buttons = mx51_efikasb_keys,
-	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
-	.cd_gpio = EFIKASB_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
-	gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
-	pwgt1 = regulator_get(NULL, "pwgt1");
-	pwgt2 = regulator_get(NULL, "pwgt2");
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_enable(pwgt1);
-		regulator_enable(pwgt2);
-	}
-	gpio_request(EFIKASB_POWEROFF, "poweroff");
-	pm_power_off = mx51_efikasb_power_off;
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static void __init mx51_efikasb_init_late(void)
-{
-	imx51_init_late();
-	mx51_efikasb_power_init();
-}
-
-/* 01     R1.3 board
-   10     R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
-	int id;
-
-	gpio_request(EFIKASB_PCBID0, "pcb id0");
-	gpio_direction_input(EFIKASB_PCBID0);
-	gpio_request(EFIKASB_PCBID1, "pcb id1");
-	gpio_direction_input(EFIKASB_PCBID1);
-
-	id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
-	switch (id) {
-	default:
-		break;
-	case 1:
-		system_rev = 0x13;
-		break;
-	case 2:
-		system_rev = 0x20;
-		break;
-	}
-}
-
-static void __init efikasb_board_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
-					ARRAY_SIZE(mx51efikasb_pads));
-	efika_board_common_init();
-
-	mx51_efikasb_board_id();
-	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
-	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
-	imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
-	.init	= mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.init_machine =  efikasb_board_init,
-	.init_late = mx51_efikasb_init_late,
-	.timer = &mx51_efikasb_timer,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
deleted file mode 100644
index 6c28e65f424d..000000000000
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B	IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN		IMX_GPIO_NR(4, 0)
-#define ARD_HOME			IMX_GPIO_NR(5, 10)
-#define ARD_BACK			IMX_GPIO_NR(5, 11)
-#define ARD_PROG			IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP		IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
-	/* UART1 */
-	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-	/* WEIM for CS1 */
-	MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
-	MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-	MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-	MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-	MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-	MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-	MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-	MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-	MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-	MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-	MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-	MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-	MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-	MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-	MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-	MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-	MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-	MX53_PAD_EIM_OE__EMI_WEIM_OE,
-	MX53_PAD_EIM_RW__EMI_WEIM_RW,
-	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-	/* SDHC1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
-	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
-	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
-	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
-	MX53_PAD_GPIO_1__GPIO1_1,
-	MX53_PAD_GPIO_9__GPIO1_9,
-	/* I2C2 */
-	MX53_PAD_EIM_EB2__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* I2C3 */
-	MX53_PAD_GPIO_3__I2C3_SCL,
-	MX53_PAD_GPIO_16__I2C3_SDA,
-	/* GPIO */
-	MX53_PAD_DISP0_DAT16__GPIO5_10,	/* home */
-	MX53_PAD_DISP0_DAT17__GPIO5_11,	/* back */
-	MX53_PAD_DISP0_DAT18__GPIO5_12,	/* prog */
-	MX53_PAD_DISP0_DAT19__GPIO5_13,	/* vol up */
-	MX53_PAD_GPIO_10__GPIO4_0,		/* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{							\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,			\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button ard_buttons[] = {
-	GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
-	GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
-	GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
-	GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
-	.buttons        = ard_buttons,
-	.nbuttons       = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
-	{
-		.start = MX53_CS1_64MB_BASE_ADDR,
-		.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* irq number is run-time assigned */
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
-	.name = "smsc911x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
-	.resource = ard_smsc911x_resources,
-	.dev = {
-		.platform_data = &ard_smsc911x_config,
-	},
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
-	.cd_gpio = ARD_SD1_CD,
-	.wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
-	.bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
-	.bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
-	gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
-	gpio_direction_input(ARD_ETHERNET_INT_B);
-
-	gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
-	gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
-	u32 reg;
-	void __iomem *weim_base, *iomuxc_base;
-
-	weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
-	if (!weim_base)
-		return -ENOMEM;
-
-	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base) {
-		iounmap(weim_base);
-		return -ENOMEM;
-	}
-
-	/* CS1 timings for LAN9220 */
-	writel(0x20001, (weim_base + 0x18));
-	writel(0x0, (weim_base + 0x1C));
-	writel(0x16000202, (weim_base + 0x20));
-	writel(0x00000002, (weim_base + 0x24));
-	writel(0x16002082, (weim_base + 0x28));
-	writel(0x00000000, (weim_base + 0x2C));
-	writel(0x00000000, (weim_base + 0x90));
-
-	/* specify 64 MB on CS1 and CS0 on GPR1 */
-	reg = readl(iomuxc_base + 0x4);
-	reg &= ~0x3F;
-	reg |= 0x1B;
-	writel(reg, (iomuxc_base + 0x4));
-
-	iounmap(iomuxc_base);
-	iounmap(weim_base);
-
-	return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
-					 ARRAY_SIZE(mx53_ard_pads));
-	weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
-	&ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
-	imx53_soc_init();
-	imx53_add_imx_uart(0, NULL);
-
-	imx53_ard_common_init();
-	mx53_ard_io_init();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
-	ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
-	imx53_add_imx2_wdt(0);
-	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
-	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
-	imx_add_gpio_keys(&ard_button_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
-	.init	= mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_ard_timer,
-	.init_machine = mx53_ard_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
deleted file mode 100644
index 09fe2197b491..000000000000
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-	MX53_PAD_PATA_DIOR__UART2_RTS,
-	MX53_PAD_PATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
-	MX53_PAD_EIM_D16__ECSPI1_SCLK,
-	MX53_PAD_EIM_D17__ECSPI1_MISO,
-	MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
-	/* ecspi chip select lines */
-	MX53_PAD_EIM_EB2__GPIO2_30,
-	MX53_PAD_EIM_D19__GPIO3_19,
-	/* LED */
-	MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= MX53EVK_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
-	.leds		= mx53evk_leds,
-	.num_leds	= ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-	imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
-							"fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx53_evk_spi_cs[] = {
-	EVK_ECSPI1_CS0,
-	EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
-	.chipselect     = mx53_evk_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
-					 ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
-	imx53_soc_init();
-	imx53_evk_common_init();
-
-	mx53_evk_init_uart();
-	mx53_evk_fec_reset();
-	imx53_add_fec(&mx53_evk_fec_pdata);
-
-	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-
-	spi_register_board_info(mx53_evk_spi_board_info,
-		ARRAY_SIZE(mx53_evk_spi_board_info));
-	imx53_add_ecspi(0, &mx53_evk_spi_data);
-	imx53_add_imx2_wdt(0);
-	gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
-	.init	= mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_evk_timer,
-	.init_machine = mx53_evk_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
deleted file mode 100644
index 8abe23c1d3c8..000000000000
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define LOCO_LED			IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
-	/* FEC */
-	MX53_PAD_FEC_MDC__FEC_MDC,
-	MX53_PAD_FEC_MDIO__FEC_MDIO,
-	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
-	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
-	/* FEC_nRST */
-	MX53_PAD_PATA_DA_0__GPIO7_6,
-	/* FEC_nINT */
-	MX53_PAD_PATA_DATA4__GPIO2_4,
-	/* AUDMUX5 */
-	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
-	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
-	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
-	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
-	/* I2C2 */
-	MX53_PAD_KEY_COL3__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1_CD */
-	MX53_PAD_EIM_DA13__GPIO3_13,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-	/* SD3_CD */
-	MX53_PAD_EIM_DA11__GPIO3_11,
-	/* SD3_WP */
-	MX53_PAD_EIM_DA12__GPIO3_12,
-	/* VGA */
-	MX53_PAD_EIM_OE__IPU_DI1_PIN7,
-	MX53_PAD_EIM_RW__IPU_DI1_PIN8,
-	/* DISPLB */
-	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
-	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
-	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
-	MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
-	/* DISP0_POWER_EN */
-	MX53_PAD_EIM_D24__GPIO3_24,
-	/* DISP0 DET INT */
-	MX53_PAD_EIM_D31__GPIO3_31,
-	/* LVDS */
-	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
-	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
-	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
-	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
-	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
-	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
-	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
-	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
-	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
-	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* UART1 */
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-	/* CSI0 */
-	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
-	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
-	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
-	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
-	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
-	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
-	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
-	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
-	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
-	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
-	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
-	/* DISPLAY */
-	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-	/* Audio CLK*/
-	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
-	/* PWM */
-	MX53_PAD_GPIO_1__PWM2_PWMO,
-	/* SPDIF */
-	MX53_PAD_GPIO_7__SPDIF_PLOCK,
-	MX53_PAD_GPIO_17__SPDIF_OUT1,
-	/* GPIO */
-	MX53_PAD_PATA_DA_1__GPIO7_7,		/* LED */
-	MX53_PAD_PATA_DA_2__GPIO7_8,
-	MX53_PAD_PATA_DATA5__GPIO2_5,
-	MX53_PAD_PATA_DATA6__GPIO2_6,
-	MX53_PAD_PATA_DATA14__GPIO2_14,
-	MX53_PAD_PATA_DATA15__GPIO2_15,
-	MX53_PAD_PATA_INTRQ__GPIO7_2,
-	MX53_PAD_EIM_WAIT__GPIO5_0,
-	MX53_PAD_NANDF_WP_B__GPIO6_9,
-	MX53_PAD_NANDF_RB0__GPIO6_10,
-	MX53_PAD_NANDF_CS1__GPIO6_14,
-	MX53_PAD_NANDF_CS2__GPIO6_15,
-	MX53_PAD_NANDF_CS3__GPIO6_16,
-	MX53_PAD_GPIO_5__GPIO1_5,
-	MX53_PAD_GPIO_16__GPIO7_11,
-	MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,				\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button loco_buttons[] = {
-	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
-	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
-	.buttons        = loco_buttons,
-	.nbuttons       = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
-	.cd_gpio = LOCO_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
-	.cd_gpio = LOCO_SD3_CD,
-	.wp_gpio = LOCO_SD3_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= LOCO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
-	.leds		= mx53loco_leds,
-	.num_leds	= ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
-					 ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mma8450", 0x1C),
-	},
-};
-
-static void __init mx53_loco_board_init(void)
-{
-	int ret;
-	imx53_soc_init();
-	imx53_qsb_common_init();
-
-	imx53_add_imx_uart(0, NULL);
-	mx53_loco_fec_reset();
-	imx53_add_fec(&mx53_loco_fec_data);
-	imx53_add_imx2_wdt(0);
-
-	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
-	if (ret)
-		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
-	i2c_register_board_info(0, mx53loco_i2c_devices,
-				ARRAY_SIZE(mx53loco_i2c_devices));
-	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
-	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
-	imx_add_gpio_keys(&loco_button_data);
-	gpio_led_register_device(-1, &mx53loco_leds_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
-	.init	= mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_loco_timer,
-	.init_machine = mx53_loco_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
deleted file mode 100644
index b15d6a6d3b68..000000000000
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-	MX53_PAD_PATA_DA_1__UART3_CTS,
-	MX53_PAD_PATA_DA_2__UART3_RTS,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD2 */
-	MX53_PAD_SD2_CMD__ESDHC2_CMD,
-	MX53_PAD_SD2_CLK__ESDHC2_CLK,
-	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
-	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
-	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
-	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, NULL);
-	imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
-	int ret;
-
-	/* Enable SATA PWR */
-	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
-			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
-	if (ret) {
-		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
-		return;
-	}
-}
-
-void __init imx53_smd_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
-					 ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
-	imx53_soc_init();
-	imx53_smd_common_init();
-
-	mx53_smd_init_uart();
-	mx53_smd_fec_reset();
-	imx53_add_fec(&mx53_smd_fec_data);
-	imx53_add_imx2_wdt(0);
-	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-	imx53_add_sdhci_esdhc_imx(2, NULL);
-	mx53_smd_ahci_pwr_on();
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
-	.init	= mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_smd_timer,
-	.init_machine = mx53_smd_board_init,
-	.init_late	= imx53_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 52d8f534be10..acb0aadb4255 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -128,25 +128,6 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = {
 	.script_addrs = &imx51_sdma_script,
 };
 
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.app_2_mcu_addr = 683,
-	.mcu_2_app_addr = 747,
-	.uart_2_mcu_addr = 817,
-	.shp_2_mcu_addr = 891,
-	.mcu_2_shp_addr = 960,
-	.uartsh_2_mcu_addr = 1032,
-	.spdif_2_mcu_addr = 1100,
-	.mcu_2_spdif_addr = 1134,
-	.firi_2_mcu_addr = 1193,
-	.mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx53.bin",
-	.script_addrs = &imx53_sdma_script,
-};
-
 static const struct resource imx50_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
 };
@@ -155,10 +136,6 @@ static const struct resource imx51_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
-static const struct resource imx53_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
 void __init imx50_soc_init(void)
 {
 	/* i.mx50 has the i.mx35 type gpio */
@@ -196,30 +173,6 @@ void __init imx51_soc_init(void)
 					ARRAY_SIZE(imx51_audmux_res));
 }
 
-void __init imx53_soc_init(void)
-{
-	/* i.mx53 has the i.mx35 type gpio */
-	mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
-	mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
-	pinctrl_provide_dummies();
-	/* i.mx53 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-
-	/* Setup AIPS registers */
-	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
-	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-
-	/* i.mx53 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
-					ARRAY_SIZE(imx53_audmux_res));
-}
-
 void __init imx51_init_late(void)
 {
 	mx51_neon_fixup();
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
index b09ee12a4ff0..fb38436ca67f 100644
--- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
@@ -11,7 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
 
 /* IMX camera FIQ handler */
 EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
deleted file mode 100644
index ee870c49bc63..000000000000
--- a/arch/arm/mach-imx/mx51_efika.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET          0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-
-#define EFIKAMX_USB_HUB_RESET	IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP	IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-
-	/* SD/MMC WP/CD */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-	MX51_PAD_GPIO1_7__SD2_WP,
-	MX51_PAD_GPIO1_8__SD2_CD,
-
-	/* spi */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB RESET */
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* WLAN */
-	MX51_PAD_EIM_A22__GPIO2_16,
-	MX51_PAD_EIM_A16__GPIO2_10,
-
-	/* USB PHY RESET */
-	MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init   = initialize_otg_port,
-	.portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *socregs_base;
-
-	mxc_iomux_v3_setup_pad(usbh1gpio);
-	gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
-	gpio_direction_output(EFIKAMX_USBH1_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USBH1_STP, 1);
-	msleep(1);
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* The clock for the USBH1 ULPI port will come externally */
-	/* from the PHY. */
-	v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			socregs_base + MX51_USB_CTRL_1_OFFSET);
-
-	iounmap(usb_base);
-
-	gpio_free(EFIKAMX_USBH1_STP);
-	mxc_iomux_v3_setup_pad(usbh1stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
-	.init   = initialize_usbh1_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
-	gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
-	gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
-	mx51_efika_hubreset();
-
-	/* pulling it low, means no USB at all... */
-	gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
-	gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
-	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
-	imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	if (usbh1_config.otg)
-		imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
-	{
-	 .name = "u-boot",
-	 .offset = 0,
-	 .size = SZ_256K,
-	},
-	{
-	  .name = "config",
-	  .offset = MTDPART_OFS_APPEND,
-	  .size = SZ_64K,
-	},
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
-	.name		= "spi_flash",
-	.parts		= mx51_efika_spi_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(mx51_efika_spi_nor_partitions),
-	.type		= "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDA", "1-000a"),
-	REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
-	{
-		.supply = "pwgt1",
-	}
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
-	{
-		.supply = "pwgt2",
-	}
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
-	{
-		.supply = "coincell",
-	}
-};
-
-static struct regulator_init_data sw1_init = {
-	.constraints = {
-		.name = "SW1",
-		.min_uV = 600000,
-		.max_uV = 1375000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.valid_modes_mask = 0,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 850000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-	.consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
-	.constraints = {
-		.name = "SW2",
-		.min_uV = 900000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 950000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	}
-};
-
-static struct regulator_init_data sw3_init = {
-	.constraints = {
-		.name = "SW3",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw4_init = {
-	.constraints = {
-		.name = "SW4",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data viohi_init = {
-	.constraints = {
-		.name = "VIOHI",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb_init = {
-	.constraints = {
-		.name = "VUSB",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data swbst_init = {
-	.constraints = {
-		.name = "SWBST",
-	}
-};
-
-static struct regulator_init_data vdig_init = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
-	.consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
-	.constraints = {
-		.name = "VPLL",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb2_init = {
-	.constraints = {
-		.name = "VUSB2",
-		.min_uV = 2400000,
-		.max_uV = 2775000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vvideo_init = {
-	.constraints = {
-		.name = "VVIDEO",
-		.min_uV = 2775000,
-		.max_uV = 2775000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
-	.consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vsd_init = {
-	.constraints = {
-		.name = "VSD",
-		.min_uV = 1800000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
-	.consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
-	.constraints = {
-		.name = "VCAM",
-		.min_uV = 2500000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen1_init = {
-	.constraints = {
-		.name = "VGEN1",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen2_init = {
-	.constraints = {
-		.name = "VGEN2",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen3_init = {
-	.constraints = {
-		.name = "VGEN3",
-		.min_uV = 1800000,
-		.max_uV = 2900000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data gpo1_init = {
-	.constraints = {
-		.name = "GPO1",
-	}
-};
-
-static struct regulator_init_data gpo2_init = {
-	.constraints = {
-		.name = "GPO2",
-	}
-};
-
-static struct regulator_init_data gpo3_init = {
-	.constraints = {
-		.name = "GPO3",
-	}
-};
-
-static struct regulator_init_data gpo4_init = {
-	.constraints = {
-		.name = "GPO4",
-	}
-};
-
-static struct regulator_init_data pwgt1_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
-	.consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
-	.consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
-	.constraints = {
-		.name = "COINCELL",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
-	.consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
-	{ .id = MC13892_SW1,		.init_data =  &sw1_init },
-	{ .id = MC13892_SW2,		.init_data =  &sw2_init },
-	{ .id = MC13892_SW3,		.init_data =  &sw3_init },
-	{ .id = MC13892_SW4,		.init_data =  &sw4_init },
-	{ .id = MC13892_SWBST,		.init_data =  &swbst_init },
-	{ .id = MC13892_VIOHI,		.init_data =  &viohi_init },
-	{ .id = MC13892_VPLL,		.init_data =  &vpll_init },
-	{ .id = MC13892_VDIG,		.init_data =  &vdig_init },
-	{ .id = MC13892_VSD,		.init_data =  &vsd_init },
-	{ .id = MC13892_VUSB2,		.init_data =  &vusb2_init },
-	{ .id = MC13892_VVIDEO,		.init_data =  &vvideo_init },
-	{ .id = MC13892_VAUDIO,		.init_data =  &vaudio_init },
-	{ .id = MC13892_VCAM,		.init_data =  &vcam_init },
-	{ .id = MC13892_VGEN1,		.init_data =  &vgen1_init },
-	{ .id = MC13892_VGEN2,		.init_data =  &vgen2_init },
-	{ .id = MC13892_VGEN3,		.init_data =  &vgen3_init },
-	{ .id = MC13892_VUSB,		.init_data =  &vusb_init },
-	{ .id = MC13892_GPO1,		.init_data =  &gpo1_init },
-	{ .id = MC13892_GPO2,		.init_data =  &gpo2_init },
-	{ .id = MC13892_GPO3,		.init_data =  &gpo3_init },
-	{ .id = MC13892_GPO4,		.init_data =  &gpo4_init },
-	{ .id = MC13892_PWGT1SPI,	.init_data = &pwgt1_init },
-	{ .id = MC13892_PWGT2SPI,	.init_data = &pwgt2_init },
-	{ .id = MC13892_VCOINCELL,	.init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
-	.flags = MC13XXX_USE_RTC,
-	.regulators = {
-		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-		.regulators = mx51_efika_regulators,
-	},
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &mx51_efika_spi_flash_data,
-		.irq = -1,
-	},
-	{
-		.modalias = "mc13892",
-		.max_speed_hz = 1000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &mx51_efika_mc13892_data,
-		/* irq number is run-time assigned */
-	},
-};
-
-static int mx51_efika_spi_cs[] = {
-	EFIKAMX_SPI_CS0,
-	EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
-	.chipselect     = mx51_efika_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
-					ARRAY_SIZE(mx51efika_pads));
-	imx51_add_imx_uart(0, &uart_pdata);
-	mx51_efika_usb();
-
-	/* FIXME: comes from original code. check this. */
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		sw2_init.constraints.state_mem.uV = 1100000;
-	else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
-		sw2_init.constraints.state_mem.uV = 1250000;
-		sw1_init.constraints.state_mem.uV = 1000000;
-	}
-	if (machine_is_mx51_efikasb())
-		vgen1_init.constraints.max_uV = 1200000;
-
-	gpio_request(EFIKAMX_PMIC, "pmic irq");
-	gpio_direction_input(EFIKAMX_PMIC);
-	mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
-	spi_register_board_info(mx51_efika_spi_board_info,
-		ARRAY_SIZE(mx51_efika_spi_board_info));
-	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
-	imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index ab98c6fec9eb..2ac43e1a2dfd 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -41,7 +41,7 @@ void __init imx_scu_map_io(void)
 	scu_base = IMX_IO_ADDRESS(base);
 }
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit imx_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	gic_secondary_init(0);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);
 	imx_enable_cpu(cpu, true);
@@ -62,7 +62,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init imx_smp_init_cpus(void)
 {
 	int i, ncores;
 
@@ -79,7 +79,17 @@ void imx_smp_prepare(void)
 	scu_enable(scu_base);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 {
 	imx_smp_prepare();
 }
+
+struct smp_operations  imx_smp_ops __initdata = {
+	.smp_init_cpus		= imx_smp_init_cpus,
+	.smp_prepare_cpus	= imx_smp_prepare_cpus,
+	.smp_secondary_init	= imx_secondary_init,
+	.smp_boot_secondary	= imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= imx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef966e1f5..5521d18bf19a 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
 
 # Object file lists.
 
-obj-y					:= core.o lm.o
+obj-y					:= core.o lm.o leds.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
-obj-$(CONFIG_LEDS)			+= leds.o
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
 obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index 899561d8db28..c3ff21b5ea24 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,3 +1,6 @@
+#include <linux/amba/serial.h>
+extern struct amba_pl010_data integrator_uart_data;
 void integrator_init_early(void);
+int integrator_init(bool is_cp);
 void integrator_reserve(void);
 void integrator_restart(char, const char *);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index ebf680bebdf2..ea22a17246d7 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -27,12 +28,13 @@
 #include <mach/cm.h>
 #include <mach/irqs.h>
 
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
-static struct amba_pl010_data integrator_uart_data;
+#include "common.h"
+
+#ifdef CONFIG_ATAGS
 
 #define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
 #define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
@@ -60,7 +62,7 @@ static struct amba_device *amba_devs[] __initdata = {
 	&kmi1_device,
 };
 
-static int __init integrator_init(void)
+int __init integrator_init(bool is_cp)
 {
 	int i;
 
@@ -69,7 +71,7 @@ static int __init integrator_init(void)
 	 * hard-code them. The Integator/CP and forward have proper cell IDs.
 	 * Else we leave them undefined to the bus driver can autoprobe them.
 	 */
-	if (machine_is_integrator()) {
+	if (!is_cp) {
 		rtc_device.periphid	= 0x00041030;
 		uart0_device.periphid	= 0x00041010;
 		uart1_device.periphid	= 0x00041010;
@@ -85,7 +87,7 @@ static int __init integrator_init(void)
 	return 0;
 }
 
-arch_initcall(integrator_init);
+#endif
 
 /*
  * On the Integrator platform, the port RTS and DTR are provided by
@@ -94,17 +96,20 @@ arch_initcall(integrator_init);
  *  UART0  7    6
  *  UART1  5    4
  */
-#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
+#define SC_CTRLC	__io_address(INTEGRATOR_SC_CTRLC)
+#define SC_CTRLS	__io_address(INTEGRATOR_SC_CTRLS)
 
 static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
 {
 	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+	u32 phybase = dev->res.start;
 
-	if (dev == &uart0_device) {
+	if (phybase == INTEGRATOR_UART0_BASE) {
+		/* UART0 */
 		rts_mask = 1 << 4;
 		dtr_mask = 1 << 5;
 	} else {
+		/* UART1 */
 		rts_mask = 1 << 6;
 		dtr_mask = 1 << 7;
 	}
@@ -123,12 +128,10 @@ static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *bas
 	__raw_writel(ctrlc, SC_CTRLC);
 }
 
-static struct amba_pl010_data integrator_uart_data = {
+struct amba_pl010_data integrator_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
 static DEFINE_RAW_SPINLOCK(cm_lock);
 
 /**
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index fbb457779895..590c192cdf4d 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -25,10 +25,10 @@
 
 static struct cpufreq_driver integrator_driver;
 
-#define CM_ID  	IO_ADDRESS(INTEGRATOR_HDR_ID)
-#define CM_OSC	IO_ADDRESS(INTEGRATOR_HDR_OSC)
-#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
-#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
+#define CM_ID  	__io_address(INTEGRATOR_HDR_ID)
+#define CM_OSC	__io_address(INTEGRATOR_HDR_OSC)
+#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
+#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
 
 static const struct icst_params lclk_params = {
 	.ref		= 24000000,
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57adb043..1a78692e32a4 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
  */
 void cm_control(u32, u32);
 
+#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
 #define CM_CTRL_REMAP			(1 << 2)
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
deleted file mode 100644
index 8de70de3dd0a..000000000000
--- a/arch/arm/mach-integrator/include/mach/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-
-#endif
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index ec467baade09..4c0347526851 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -324,6 +324,10 @@
  */
 #define PHYS_PCI_V3_BASE                0x62000000
 
+#define PCI_MEMORY_VADDR		0xe8000000
+#define PCI_CONFIG_VADDR		0xec000000
+#define PCI_V3_VADDR			0xed000000
+
 /* ------------------------------------------------------------------------
  *  Integrator Interrupt Controllers
  * ------------------------------------------------------------------------
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 7b1055c8e0b9..d5b5435a09ae 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -34,6 +34,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/clk.h>
 #include <linux/platform_data/clk-integrator.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <video/vga.h>
 
 #include <mach/hardware.h>
@@ -50,6 +53,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
+#include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 
 #include <plat/fpga-irq.h>
@@ -73,7 +77,7 @@
  * e8000000	40000000	PCI memory		PHYS_PCI_MEM_BASE	(max 512M)
  * ec000000	61000000	PCI config space	PHYS_PCI_CONFIG_BASE	(max 16M)
  * ed000000	62000000	PCI V3 regs		PHYS_PCI_V3_BASE	(max 64k)
- * ee000000	60000000	PCI IO			PHYS_PCI_IO_BASE	(max 16M)
+ * fee00000	60000000	PCI IO			PHYS_PCI_IO_BASE	(max 16M)
  * ef000000			Cache flush
  * f1000000	10000000	Core module registers
  * f1100000	11000000	System controller registers
@@ -133,25 +137,20 @@ static struct map_desc ap_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= PCI_MEMORY_VADDR,
+		.virtual	= (unsigned long)PCI_MEMORY_VADDR,
 		.pfn		= __phys_to_pfn(PHYS_PCI_MEM_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= PCI_CONFIG_VADDR,
+		.virtual	= (unsigned long)PCI_CONFIG_VADDR,
 		.pfn		= __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= PCI_V3_VADDR,
+		.virtual	= (unsigned long)PCI_V3_VADDR,
 		.pfn		= __phys_to_pfn(PHYS_PCI_V3_BASE),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= PCI_IO_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_IO_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -159,23 +158,7 @@ static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
 	vga_base = PCI_MEMORY_VADDR;
-}
-
-#define INTEGRATOR_SC_VALID_INT	0x003fffff
-
-static void __init ap_init_irq(void)
-{
-	/* Disable all interrupts initially. */
-	/* Do the core module ones */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
-	/* do the header card stuff next */
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-		-1, INTEGRATOR_SC_VALID_INT, NULL);
-	integrator_clk_init(false);
+	pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
 }
 
 #ifdef CONFIG_PM
@@ -270,56 +253,12 @@ static struct physmap_flash_data ap_flash_data = {
 	.set_vpp	= ap_flash_set_vpp,
 };
 
-static struct resource cfi_flash_resource = {
-	.start		= INTEGRATOR_FLASH_BASE,
-	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ap_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &cfi_flash_resource,
-};
-
-static void __init ap_init(void)
-{
-	unsigned long sc_dec;
-	int i;
-
-	platform_device_register(&cfi_flash_device);
-
-	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
-	for (i = 0; i < 4; i++) {
-		struct lm_device *lmdev;
-
-		if ((sc_dec & (16 << i)) == 0)
-			continue;
-
-		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
-		if (!lmdev)
-			continue;
-
-		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
-		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
-		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
-		lmdev->id = i;
-
-		lm_device_register(lmdev);
-	}
-}
-
 /*
  * Where is the timer (VA)?
  */
-#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
 static unsigned long timer_reload;
 
@@ -328,9 +267,9 @@ static u32 notrace integrator_read_sched_clock(void)
 	return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
 }
 
-static void integrator_clocksource_init(unsigned long inrate)
+static void integrator_clocksource_init(unsigned long inrate,
+					void __iomem *base)
 {
-	void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
 	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 	unsigned long rate = inrate;
 
@@ -347,7 +286,7 @@ static void integrator_clocksource_init(unsigned long inrate)
 	setup_sched_clock(integrator_read_sched_clock, 16, rate);
 }
 
-static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+static void __iomem * clkevt_base;
 
 /*
  * IRQ handler for the timer
@@ -419,11 +358,13 @@ static struct irqaction integrator_timer_irq = {
 	.dev_id		= &integrator_clockevent,
 };
 
-static void integrator_clockevent_init(unsigned long inrate)
+static void integrator_clockevent_init(unsigned long inrate,
+				void __iomem *base, int irq)
 {
 	unsigned long rate = inrate;
 	unsigned int ctrl = 0;
 
+	clkevt_base = base;
 	/* Calculate and program a divisor */
 	if (rate > 0x100000 * HZ) {
 		rate /= 256;
@@ -435,7 +376,7 @@ static void integrator_clockevent_init(unsigned long inrate)
 	timer_reload = rate / HZ;
 	writel(ctrl, clkevt_base + TIMER_CTRL);
 
-	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+	setup_irq(irq, &integrator_timer_irq);
 	clockevents_config_and_register(&integrator_clockevent,
 					rate,
 					1,
@@ -446,9 +387,153 @@ void __init ap_init_early(void)
 {
 }
 
+#ifdef CONFIG_OF
+
+static void __init ap_init_timer_of(void)
+{
+	struct device_node *node;
+	const char *path;
+	void __iomem *base;
+	int err;
+	int irq;
+	struct clk *clk;
+	unsigned long rate;
+
+	clk = clk_get_sys("ap_timer", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	rate = clk_get_rate(clk);
+
+	err = of_property_read_string(of_aliases,
+				"arm,timer-primary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	writel(0, base + TIMER_CTRL);
+	integrator_clocksource_init(rate, base);
+
+	err = of_property_read_string(of_aliases,
+				"arm,timer-secondary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	irq = irq_of_parse_and_map(node, 0);
+	writel(0, base + TIMER_CTRL);
+	integrator_clockevent_init(rate, base, irq);
+}
+
+static struct sys_timer ap_of_timer = {
+	.init		= ap_init_timer_of,
+};
+
+static const struct of_device_id fpga_irq_of_match[] __initconst = {
+	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
+	{ /* Sentinel */ }
+};
+
+static void __init ap_init_irq_of(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	of_irq_init(fpga_irq_of_match);
+	integrator_clk_init(false);
+}
+
+/* For the Device Tree, add in the UART callbacks as AUXDATA */
+static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+		"rtc", NULL),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+		"uart0", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+		"uart1", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+		"kmi0", NULL),
+	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+		"kmi1", NULL),
+	OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE,
+		"physmap-flash", &ap_flash_data),
+	{ /* sentinel */ },
+};
+
+static void __init ap_init_of(void)
+{
+	unsigned long sc_dec;
+	int i;
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			ap_auxdata_lookup, NULL);
+
+	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
+	for (i = 0; i < 4; i++) {
+		struct lm_device *lmdev;
+
+		if ((sc_dec & (16 << i)) == 0)
+			continue;
+
+		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+		if (!lmdev)
+			continue;
+
+		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+		lmdev->resource.flags = IORESOURCE_MEM;
+		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->id = i;
+
+		lm_device_register(lmdev);
+	}
+}
+
+static const char * ap_dt_board_compat[] = {
+	"arm,integrator-ap",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= ap_map_io,
+	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
+	.init_early	= ap_init_early,
+	.init_irq	= ap_init_irq_of,
+	.handle_irq	= fpga_handle_irq,
+	.timer		= &ap_of_timer,
+	.init_machine	= ap_init_of,
+	.restart	= integrator_restart,
+	.dt_compat      = ap_dt_board_compat,
+MACHINE_END
+
+#endif
+
+#ifdef CONFIG_ATAGS
+
 /*
- * Set up timer(s).
+ * This is where non-devicetree initialization code is collected and stashed
+ * for eventual deletion.
  */
+
+static struct resource cfi_flash_resource = {
+	.start		= INTEGRATOR_FLASH_BASE,
+	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cfi_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ap_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cfi_flash_resource,
+};
+
 static void __init ap_init_timer(void)
 {
 	struct clk *clk;
@@ -456,21 +541,69 @@ static void __init ap_init_timer(void)
 
 	clk = clk_get_sys("ap_timer", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
 	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 
-	integrator_clocksource_init(rate);
-	integrator_clockevent_init(rate);
+	integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
+	integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
+				IRQ_TIMERINT1);
 }
 
 static struct sys_timer ap_timer = {
 	.init		= ap_init_timer,
 };
 
+#define INTEGRATOR_SC_VALID_INT	0x003fffff
+
+static void __init ap_init_irq(void)
+{
+	/* Disable all interrupts initially. */
+	/* Do the core module ones */
+	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+
+	/* do the header card stuff next */
+	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
+	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
+
+	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
+		-1, INTEGRATOR_SC_VALID_INT, NULL);
+	integrator_clk_init(false);
+}
+
+static void __init ap_init(void)
+{
+	unsigned long sc_dec;
+	int i;
+
+	platform_device_register(&cfi_flash_device);
+
+	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
+	for (i = 0; i < 4; i++) {
+		struct lm_device *lmdev;
+
+		if ((sc_dec & (16 << i)) == 0)
+			continue;
+
+		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+		if (!lmdev)
+			continue;
+
+		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+		lmdev->resource.flags = IORESOURCE_MEM;
+		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->id = i;
+
+		lm_device_register(lmdev);
+	}
+
+	integrator_init(false);
+}
+
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
@@ -484,3 +617,5 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.init_machine	= ap_init,
 	.restart	= integrator_restart,
 MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 82d5c837cc74..6870a1fbcd78 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -23,6 +23,9 @@
 #include <linux/gfp.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_data/clk-integrator.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -49,17 +52,10 @@
 #include "common.h"
 
 #define INTCP_PA_FLASH_BASE		0x24000000
-#define INTCP_FLASH_SIZE		SZ_32M
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
-
-#define INTCP_ETH_SIZE			0x10
-
-#define INTCP_VA_CTRL_BASE		IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
+#define INTCP_VA_CTRL_BASE		__io_address(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -143,37 +139,6 @@ static void __init intcp_map_io(void)
 	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
 }
 
-static void __init intcp_init_irq(void)
-{
-	u32 pic_mask, cic_mask, sic_mask;
-
-	/* These masks are for the HW IRQ registers */
-	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
-	pic_mask |= (~((~0u) << (29 - 22))) << 22;
-	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
-	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
-	/*
-	 * Disable all interrupt sources
-	 */
-	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-		      -1, pic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-		      -1, cic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		      IRQ_CP_CPPLDINT, sic_mask, NULL);
-	integrator_clk_init(true);
-}
-
 /*
  * Flash handling.
  */
@@ -216,47 +181,6 @@ static struct physmap_flash_data intcp_flash_data = {
 	.set_vpp	= intcp_flash_set_vpp,
 };
 
-static struct resource intcp_flash_resource = {
-	.start		= INTCP_PA_FLASH_BASE,
-	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &intcp_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &intcp_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= INTEGRATOR_CP_ETH_BASE,
-		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CP_ETHINT,
-		.end	= IRQ_CP_ETHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
-	&intcp_flash_device,
-	&smc91x_device,
-};
-
 /*
  * It seems that the card insertion interrupt remains active after
  * we've acknowledged it.  We therefore ignore the interrupt, and
@@ -265,8 +189,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
-	writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
+	unsigned int status = readl(__io_address(0xca000000 + 4));
+	writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8));
 
 	return status & 8;
 }
@@ -278,16 +202,6 @@ static struct mmci_platform_data mmc_data = {
 	.gpio_cd	= -1,
 };
 
-#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
-	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
-	INTEGRATOR_CP_AACI_IRQS, NULL);
-
-
 /*
  * CLCD support
  */
@@ -338,15 +252,6 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
-	{ IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&mmc_device,
-	&aaci_device,
-	&clcd_device,
-};
-
 #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
 
 static void __init intcp_init_early(void)
@@ -356,16 +261,193 @@ static void __init intcp_init_early(void)
 #endif
 }
 
-static void __init intcp_init(void)
+static void __init intcp_timer_init_of(void)
 {
-	int i;
+	struct device_node *node;
+	const char *path;
+	void __iomem *base;
+	int err;
+	int irq;
+
+	err = of_property_read_string(of_aliases,
+				"arm,timer-primary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	writel(0, base + TIMER_CTRL);
+	sp804_clocksource_init(base, node->name);
+
+	err = of_property_read_string(of_aliases,
+				"arm,timer-secondary", &path);
+	if (WARN_ON(err))
+		return;
+	node = of_find_node_by_path(path);
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+	irq = irq_of_parse_and_map(node, 0);
+	writel(0, base + TIMER_CTRL);
+	sp804_clockevents_init(base, irq, node->name);
+}
 
-	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+static struct sys_timer cp_of_timer = {
+	.init		= intcp_timer_init_of,
+};
 
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
+#ifdef CONFIG_OF
+
+static const struct of_device_id fpga_irq_of_match[] __initconst = {
+	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
+	{ /* Sentinel */ }
+};
+
+static void __init intcp_init_irq_of(void)
+{
+	of_irq_init(fpga_irq_of_match);
+	integrator_clk_init(true);
+}
+
+/*
+ * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
+ * and enforce the bus names since these are used for clock lookups.
+ */
+static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
+		"rtc", NULL),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+		"uart0", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+		"uart1", &integrator_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
+		"kmi0", NULL),
+	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
+		"kmi1", NULL),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
+		"mmci", &mmc_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
+		"aaci", &mmc_data),
+	OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
+		"clcd", &clcd_data),
+	OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
+		"physmap-flash", &intcp_flash_data),
+	{ /* sentinel */ },
+};
+
+static void __init intcp_init_of(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			intcp_auxdata_lookup, NULL);
+}
+
+static const char * intcp_dt_board_compat[] = {
+	"arm,integrator-cp",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= intcp_map_io,
+	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
+	.init_early	= intcp_init_early,
+	.init_irq	= intcp_init_irq_of,
+	.handle_irq	= fpga_handle_irq,
+	.timer		= &cp_of_timer,
+	.init_machine	= intcp_init_of,
+	.restart	= integrator_restart,
+	.dt_compat      = intcp_dt_board_compat,
+MACHINE_END
+
+#endif
+
+#ifdef CONFIG_ATAGS
+
+/*
+ * This is where non-devicetree initialization code is collected and stashed
+ * for eventual deletion.
+ */
+
+#define INTCP_FLASH_SIZE		SZ_32M
+
+static struct resource intcp_flash_resource = {
+	.start		= INTCP_PA_FLASH_BASE,
+	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device intcp_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &intcp_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &intcp_flash_resource,
+};
+
+#define INTCP_ETH_SIZE			0x10
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= INTEGRATOR_CP_ETH_BASE,
+		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CP_ETHINT,
+		.end	= IRQ_CP_ETHINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *intcp_devs[] __initdata = {
+	&intcp_flash_device,
+	&smc91x_device,
+};
+
+#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
+#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
+
+static void __init intcp_init_irq(void)
+{
+	u32 pic_mask, cic_mask, sic_mask;
+
+	/* These masks are for the HW IRQ registers */
+	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
+	pic_mask |= (~((~0u) << (29 - 22))) << 22;
+	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
+	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
+
+	/*
+	 * Disable all interrupt sources
+	 */
+	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
+	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
+	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
+	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
+	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
+	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
+
+	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
+		      -1, pic_mask, NULL);
+
+	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
+		      -1, cic_mask, NULL);
+
+	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
+		      IRQ_CP_CPPLDINT, sic_mask, NULL);
+
+	integrator_clk_init(true);
 }
 
 #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
@@ -386,6 +468,37 @@ static struct sys_timer cp_timer = {
 	.init		= intcp_timer_init,
 };
 
+#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
+
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
+	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
+	INTEGRATOR_CP_AACI_IRQS, NULL);
+
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
+	{ IRQ_CP_CLCDCINT }, &clcd_data);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&mmc_device,
+	&aaci_device,
+	&clcd_device,
+};
+
+static void __init intcp_init(void)
+{
+	int i;
+
+	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	integrator_init(true);
+}
+
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
@@ -399,3 +512,5 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.init_machine	= intcp_init,
 	.restart	= integrator_restart,
 MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 466defa97842..7a7f6d3273bf 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,90 +1,125 @@
 /*
- *  linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
  *
- *  Integrator/AP and Integrator/CP LED control routines
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
+#include <mach/cm.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
 
-static int saved_leds;
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG	(__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
 
-static void integrator_leds_event(led_event_t ledevt)
+struct integrator_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} integrator_leds[] = {
+	{ "integrator:green0", "heartbeat", },
+	{ "integrator:yellow", },
+	{ "integrator:red", },
+	{ "integrator:green1", },
+	{ "integrator:core_module", "cpu0", },
+};
+
+static void integrator_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	unsigned long flags;
-	const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
-	unsigned int update_alpha_leds;
+	struct integrator_led *led = container_of(cdev,
+						 struct integrator_led, cdev);
+	u32 reg = __raw_readl(LEDREG);
 
-	// yup, change the LEDs
-	local_irq_save(flags);
-	update_alpha_leds = 0;
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
 
-	switch(ledevt) {
-	case led_idle_start:
-		cm_control(CM_CTRL_LED, 0);
-		break;
+	while (__raw_readl(ALPHA_REG) & 1)
+		cpu_relax();
 
-	case led_idle_end:
-		cm_control(CM_CTRL_LED, CM_CTRL_LED);
-		break;
+	__raw_writel(reg, LEDREG);
+}
 
-	case led_timer:
-		saved_leds ^= GREEN_LED;
-		update_alpha_leds = 1;
-		break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+	struct integrator_led *led = container_of(cdev,
+						 struct integrator_led, cdev);
+	u32 reg = __raw_readl(LEDREG);
 
-	case led_red_on:
-		saved_leds |= RED_LED;
-		update_alpha_leds = 1;
-		break;
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
 
-	case led_red_off:
-		saved_leds &= ~RED_LED;
-		update_alpha_leds = 1;
-		break;
+static void cm_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	if (b != LED_OFF)
+		cm_control(CM_CTRL_LED, CM_CTRL_LED);
+	else
+		cm_control(CM_CTRL_LED, 0);
+}
 
-	default:
-		break;
-	}
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+	u32 reg = readl(CM_CTRL);
 
-	if (update_alpha_leds) {
-		while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
-		__raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
-	}
-	local_irq_restore(flags);
+	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
 }
 
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
 {
-	if (machine_is_integrator() || machine_is_cintegrator())
-		leds_event = integrator_leds_event;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+		struct integrator_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+
+		led->cdev.name = integrator_leds[i].name;
+
+		if (i == 4) { /* Setting for LED in core module */
+			led->cdev.brightness_set = cm_led_set;
+			led->cdev.brightness_get = cm_led_get;
+		} else {
+			led->cdev.brightness_set = integrator_led_set;
+			led->cdev.brightness_get = integrator_led_get;
+		}
+
+		led->cdev.default_trigger = integrator_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
 
 	return 0;
 }
 
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
+#endif
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index b866880e82ac..bbeca59df66b 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -41,61 +41,61 @@
 /*
  * The V3 PCI interface chip in Integrator provides several windows from
  * local bus memory into the PCI memory areas.   Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse 
+ * are not really enough windows for our usage, therefore we reuse
  * one of the windows for access to PCI configuration space.  The
  * memory map is as follows:
- * 
+ *
  * Local Bus Memory         Usage
- * 
+ *
  * 40000000 - 4FFFFFFF      PCI memory.  256M non-prefetchable
  * 50000000 - 5FFFFFFF      PCI memory.  256M prefetchable
  * 60000000 - 60FFFFFF      PCI IO.  16M
  * 61000000 - 61FFFFFF      PCI Configuration. 16M
- * 
+ *
  * There are three V3 windows, each described by a pair of V3 registers.
  * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
  * Base0 and Base1 can be used for any type of PCI memory access.   Base2
  * can be used either for PCI I/O or for I20 accesses.  By default, uHAL
  * uses this only for PCI IO space.
- * 
+ *
  * Normally these spaces are mapped using the following base registers:
- * 
+ *
  * Usage Local Bus Memory         Base/Map registers used
- * 
+ *
  * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
  * Mem   50000000 - 5FFFFFFF      LB_BASE1/LB_MAP1
  * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
  * Cfg   61000000 - 61FFFFFF
- * 
+ *
  * This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI 
+ * When PCI configuration accesses are needed (via the uHAL PCI
  * configuration space primitives) we must remap the spaces as follows:
- * 
+ *
  * Usage Local Bus Memory         Base/Map registers used
- * 
+ *
  * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
  * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0
  * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
  * Cfg   61000000 - 61FFFFFF      LB_BASE1/LB_MAP1
- * 
+ *
  * To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within 
+ * The V3 chip translates an address by checking its range within
  * each of the BASE/MAP pairs in turn (in ascending register number
  * order).  It will use the first matching pair.   So, for example,
  * if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from 
+ * LB_BASE1/LB_MAP1, the V3 will use the translation from
  * LB_BASE0/LB_MAP0.
- * 
+ *
  * To allow PCI Configuration space access, the code enlarges the
  * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M.  This occludes
  * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
  * be remapped for use by configuration cycles.
- * 
- * At the end of the PCI Configuration space accesses, 
+ *
+ * At the end of the PCI Configuration space accesses,
  * LB_BASE1/LB_MAP1 is reset to map PCI Memory.  Finally the window
  * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
  * reveal the now restored LB_BASE1/LB_MAP1 window.
- * 
+ *
  * NOTE: We do not set up I2O mapping.  I suspect that this is only
  * for an intelligent (target) device.  Using I2O disables most of
  * the mappings into PCI memory.
@@ -127,8 +127,8 @@
  *
  * returns:	configuration address to play on the PCI bus
  *
- * To generate the appropriate PCI configuration cycles in the PCI 
- * configuration address space, you present the V3 with the following pattern 
+ * To generate the appropriate PCI configuration cycles in the PCI
+ * configuration address space, you present the V3 with the following pattern
  * (which is very nearly a type 1 (except that the lower two bits are 00 and
  * not 01).   In order for this mapping to work you need to set up one of
  * the local to PCI aperatures to 16Mbytes in length translating to
@@ -138,7 +138,7 @@
  *
  * Type 0:
  *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
@@ -150,7 +150,7 @@
  *
  * Type 1:
  *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
@@ -161,7 +161,7 @@
  *	15:11	Device number (5 bits)
  *	10:8	function number
  *	 7:2	register number
- *  
+ *
  */
 static DEFINE_RAW_SPINLOCK(v3_lock);
 
@@ -181,7 +181,7 @@ static DEFINE_RAW_SPINLOCK(v3_lock);
 #undef V3_LB_BASE_PREFETCH
 #define V3_LB_BASE_PREFETCH 0
 
-static unsigned long v3_open_config_window(struct pci_bus *bus,
+static void __iomem *v3_open_config_window(struct pci_bus *bus,
 					   unsigned int devfn, int offset)
 {
 	unsigned int address, mapaddress, busnr;
@@ -280,7 +280,7 @@ static void v3_close_config_window(void)
 static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 			  int size, u32 *val)
 {
-	unsigned long addr;
+	void __iomem *addr;
 	unsigned long flags;
 	u32 v;
 
@@ -311,7 +311,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 			   int size, u32 val)
 {
-	unsigned long addr;
+	void __iomem *addr;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&v3_lock, flags);
@@ -374,12 +374,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
 	}
 
 	/*
-	 * the IO resource for this bus
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(&sys->resources,
-				&ioport_resource, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
@@ -391,9 +388,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
  * means I can't get additional information on the reason for the pm2fb
  * problems.  I suppose I'll just have to mind-meld with the machine. ;)
  */
-#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
-#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
-#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
+#define SC_PCI     __io_address(INTEGRATOR_SC_PCIENABLE)
+#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20)
+#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24)
 
 static int
 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
@@ -498,7 +495,6 @@ void __init pci_v3_preinit(void)
 	unsigned int temp;
 	int ret;
 
-	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
 
 	/*
diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
deleted file mode 100644
index f13188518025..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __iop13xx_io(a)
-
-extern void __iomem * __iop13xx_io(unsigned long io_addr);
-
-#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index e190dcd7d72d..7480f58267aa 100644
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -69,21 +69,11 @@ extern unsigned long get_iop_tick_rate(void);
  * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
  *
  * IO MAP
- * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
- * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
+ * 0x00000 + 64K	0x0.fffb.0000	0xfee0.0000	PCIX outbound i/o window
+ * 0x10000 + 64K	0x0.fffd.0000	0xfee1.0000	PCIE outbound i/o window
  */
-#define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
 #define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
 #define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
-#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
-#define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIX_LOWER_IO_PA\
-					   - IOP13XX_PCIX_LOWER_IO_VA))
 
 #define IOP13XX_PCIX_MEM_PHYS_OFFSET  0x100000000ULL
 #define IOP13XX_PCIX_MEM_WINDOW_SIZE  0x3a000000UL
@@ -103,20 +93,8 @@ extern unsigned long get_iop_tick_rate(void);
 					IOP13XX_PCIX_LOWER_MEM_BA)
 
 /* PCI-E ranges */
-#define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
 #define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
-#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
-#define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIE_LOWER_IO_PA\
-					   - IOP13XX_PCIE_LOWER_IO_VA))
+#define IOP13XX_PCIE_LOWER_IO_BA	 0x10000UL  /* OIOTVR */
 
 #define IOP13XX_PCIE_MEM_PHYS_OFFSET  	 0x200000000ULL
 #define IOP13XX_PCIE_MEM_WINDOW_SIZE  	 0x3a000000UL
@@ -148,18 +126,16 @@ extern unsigned long get_iop_tick_rate(void);
  * IOP13XX chipset registers
  */
 #define IOP13XX_PMMR_PHYS_MEM_BASE	   0xffd80000UL  /* PMMR phys. address */
-#define IOP13XX_PMMR_VIRT_MEM_BASE	   0xfee80000UL  /* PMMR phys. address */
+#define IOP13XX_PMMR_VIRT_MEM_BASE	   (void __iomem *)(0xfee80000UL)  /* PMMR phys. address */
 #define IOP13XX_PMMR_MEM_WINDOW_SIZE	   0x80000
 #define IOP13XX_PMMR_UPPER_MEM_VA	   (IOP13XX_PMMR_VIRT_MEM_BASE +\
 					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
 #define IOP13XX_PMMR_UPPER_MEM_PA	   (IOP13XX_PMMR_PHYS_MEM_BASE +\
 					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (u32) ((u32) addr +\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (u32) ((u32) addr -\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (((addr) - IOP13XX_PMMR_VIRT_MEM_BASE)\
+					   + IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (((addr) - IOP13XX_PMMR_PHYS_MEM_BASE)\
+					   + IOP13XX_PMMR_VIRT_MEM_BASE)
 #define IOP13XX_REG_ADDR32(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
 #define IOP13XX_REG_ADDR16(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
 #define IOP13XX_REG_ADDR8(reg)      	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
@@ -169,10 +145,10 @@ extern unsigned long get_iop_tick_rate(void);
 #define IOP13XX_PMMR_SIZE		   0x00080000
 
 /*=================== Defines for Platform Devices =====================*/
-#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
-#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
+#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002300)
+#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE + 0x00002340)
+#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002300)
+#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE + 0x00002340)
 
 #define IOP13XX_I2C0_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
 #define IOP13XX_I2C1_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 1afa99ef97fa..7c032d0ab24a 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -16,12 +16,12 @@
 #define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
 #define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
 
-static inline dma_addr_t __virt_to_lbus(unsigned long x)
+static inline dma_addr_t __virt_to_lbus(void __iomem *x)
 {
 	return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
 }
 
-static inline unsigned long __lbus_to_virt(dma_addr_t x)
+static inline void __iomem *__lbus_to_virt(dma_addr_t x)
 {
 	return x + IOP13XX_PMMR_VIRT_MEM_BASE - IOP13XX_PMMR_PHYS_MEM_BASE;
 }
@@ -38,23 +38,23 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 
 #define __arch_dma_to_virt(dev, addr)					\
 	({								\
-		unsigned long __virt;					\
+		void * __virt;						\
 		dma_addr_t __dma = addr;				\
 		if (is_lbus_device(dev) && __is_lbus_dma(__dma))	\
 			__virt = __lbus_to_virt(__dma);			\
 		else							\
-			__virt = __phys_to_virt(__dma);			\
-		(void *)__virt;						\
+			__virt = (void *)__phys_to_virt(__dma);		\
+		__virt;							\
 	})
 
 #define __arch_virt_to_dma(dev, addr)					\
 	({								\
-		unsigned long __virt = (unsigned long)addr;		\
+		void * __virt = addr;					\
 		dma_addr_t __dma;					\
 		if (is_lbus_device(dev) && __is_lbus_virt(__virt))	\
 			__dma = __virt_to_lbus(__virt);			\
 		else							\
-			__dma = __virt_to_phys(__virt);			\
+			__dma = __virt_to_phys((unsigned long)__virt);	\
 		__dma;							\
 	})
 
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 3c364198db9c..183dc8b5511b 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -23,25 +23,6 @@
 
 #include "pci.h"
 
-void * __iomem __iop13xx_io(unsigned long io_addr)
-{
-	void __iomem * io_virt;
-
-	switch (io_addr) {
-	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
-		io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr);
-		break;
-	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
-		io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr);
-		break;
-	default:
-		BUG();
-	}
-
-	return io_virt;
-}
-EXPORT_SYMBOL(__iop13xx_io);
-
 static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
 	size_t size, unsigned int mtype, void *caller)
 {
@@ -52,14 +33,14 @@ static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
 		if (unlikely(!iop13xx_atux_mem_base))
 			retval = NULL;
 		else
-			retval = (void *)(iop13xx_atux_mem_base +
+			retval = (iop13xx_atux_mem_base +
 			         (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
 		break;
 	case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
 		if (unlikely(!iop13xx_atue_mem_base))
 			retval = NULL;
 		else
-			retval = (void *)(iop13xx_atue_mem_base +
+			retval = (iop13xx_atue_mem_base +
 			         (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
 		break;
 	case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
@@ -67,14 +48,8 @@ static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
 				       (cookie - IOP13XX_PBI_LOWER_MEM_RA),
 				       size, mtype, __builtin_return_address(0));
 		break;
-	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
-		retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
-		break;
-	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
-		retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
-		break;
 	case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
-		retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
+		retval = IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
 		break;
 	default:
 		retval = __arm_ioremap_caller(cookie, size, mtype,
@@ -99,9 +74,7 @@ static void __iop13xx_iounmap(volatile void __iomem *addr)
 		    goto skip;
 
 	switch ((u32) addr) {
-	case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
-	case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
-	case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
+	case (u32)IOP13XX_PMMR_VIRT_MEM_BASE ... (u32)IOP13XX_PMMR_UPPER_MEM_VA:
 		goto skip;
 	}
 	__iounmap(addr);
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 861cb12ef436..9082b84aeebb 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -36,8 +36,8 @@ u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
 u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
 static struct pci_bus *pci_bus_atux = 0;
 static struct pci_bus *pci_bus_atue = 0;
-u32 iop13xx_atue_mem_base;
-u32 iop13xx_atux_mem_base;
+void __iomem *iop13xx_atue_mem_base;
+void __iomem *iop13xx_atux_mem_base;
 size_t iop13xx_atue_mem_size;
 size_t iop13xx_atux_mem_size;
 
@@ -88,8 +88,7 @@ void iop13xx_map_pci_memory(void)
 				}
 
 				if (end) {
-					iop13xx_atux_mem_base =
-					(u32) __arm_ioremap_pfn(
+					iop13xx_atux_mem_base = __arm_ioremap_pfn(
 					__phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
 					, 0, iop13xx_atux_mem_size, MT_DEVICE);
 					if (!iop13xx_atux_mem_base) {
@@ -99,7 +98,7 @@ void iop13xx_map_pci_memory(void)
 					}
 				} else
 					iop13xx_atux_mem_size = 0;
-				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+				PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
 				__func__, atu, iop13xx_atux_mem_size,
 				iop13xx_atux_mem_base);
 				break;
@@ -114,8 +113,7 @@ void iop13xx_map_pci_memory(void)
 				}
 
 				if (end) {
-					iop13xx_atue_mem_base =
-					(u32) __arm_ioremap_pfn(
+					iop13xx_atue_mem_base = __arm_ioremap_pfn(
 					__phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
 					, 0, iop13xx_atue_mem_size, MT_DEVICE);
 					if (!iop13xx_atue_mem_base) {
@@ -125,13 +123,13 @@ void iop13xx_map_pci_memory(void)
 					}
 				} else
 					iop13xx_atue_mem_size = 0;
-				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
+				PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
 				__func__, atu, iop13xx_atue_mem_size,
 				iop13xx_atue_mem_base);
 				break;
 			}
 
-			printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
+			printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n",
 			atu ? "ATUE" : "ATUX",
 			(atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
 			SZ_1M,
@@ -970,7 +968,6 @@ void __init iop13xx_pci_init(void)
 	__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
 
 	/* Setup the Min Address for PCI memory... */
-	pcibios_min_io = 0;
 	pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
 
 	/* if Linux is given control of an ATU
@@ -1003,7 +1000,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 	if (nr > 1)
 		return 0;
 
-	res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (!res)
 		panic("PCI: unable to alloc resources");
 
@@ -1042,17 +1039,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 				  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
 		__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
 
-		res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
-		res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
-		res[0].name  = "IQ81340 ATUX PCI I/O Space";
-		res[0].flags = IORESOURCE_IO;
+		pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
 
-		res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
-		res[1].end   = IOP13XX_PCIX_UPPER_MEM_RA;
-		res[1].name  = "IQ81340 ATUX PCI Memory Space";
-		res[1].flags = IORESOURCE_MEM;
+		res->start = IOP13XX_PCIX_LOWER_MEM_RA;
+		res->end   = IOP13XX_PCIX_UPPER_MEM_RA;
+		res->name  = "IQ81340 ATUX PCI Memory Space";
+		res->flags = IORESOURCE_MEM;
 		sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
 		break;
 	case IOP13XX_INIT_ATU_ATUE:
 		/* Note: the function number field in the PCSR is ro */
@@ -1063,17 +1056,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 
 		__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
 
-		res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
-		res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
-		res[0].name  = "IQ81340 ATUE PCI I/O Space";
-		res[0].flags = IORESOURCE_IO;
+		pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
 
-		res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
-		res[1].end   = IOP13XX_PCIE_UPPER_MEM_RA;
-		res[1].name  = "IQ81340 ATUE PCI Memory Space";
-		res[1].flags = IORESOURCE_MEM;
+		res->start = IOP13XX_PCIE_LOWER_MEM_RA;
+		res->end   = IOP13XX_PCIE_UPPER_MEM_RA;
+		res->name  = "IQ81340 ATUE PCI Memory Space";
+		res->flags = IORESOURCE_MEM;
 		sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
 		sys->map_irq = iop13xx_pcie_map_irq;
 		break;
 	default:
@@ -1081,11 +1070,9 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 	}
 
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
+	request_resource(&iomem_resource, res);
 
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
 
 	return 1;
 }
diff --git a/arch/arm/mach-iop13xx/pci.h b/arch/arm/mach-iop13xx/pci.h
index c70cf5b41e31..d45a80b3080e 100644
--- a/arch/arm/mach-iop13xx/pci.h
+++ b/arch/arm/mach-iop13xx/pci.h
@@ -1,6 +1,6 @@
 #include <linux/types.h>
 
-extern u32 iop13xx_atue_mem_base;
-extern u32 iop13xx_atux_mem_base;
+extern void __iomem *iop13xx_atue_mem_base;
+extern void __iomem *iop13xx_atux_mem_base;
 extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index daabb1fa6c2c..3181f61ea63e 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -36,20 +36,10 @@
  */
 static struct map_desc iop13xx_std_desc[] __initdata = {
 	{    /* mem mapped registers */
-		.virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
+		.virtual = (unsigned long)IOP13XX_PMMR_VIRT_MEM_BASE,
 		.pfn 	 = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
 		.length  = IOP13XX_PMMR_SIZE,
 		.type	 = MT_DEVICE,
-	}, { /* PCIE IO space */
-		.virtual = IOP13XX_PCIE_LOWER_IO_VA,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
-		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
-		.type	 = MT_DEVICE,
-	}, { /* PCIX IO space */
-		.virtual = IOP13XX_PCIX_LOWER_IO_VA,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
-		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
-		.type	 = MT_DEVICE,
 	},
 };
 
@@ -81,8 +71,8 @@ static struct resource iop13xx_uart1_resources[] = {
 
 static struct plat_serial8250_port iop13xx_uart0_data[] = {
 	{
-       .membase     = (char*)(IOP13XX_UART0_VIRT),
-       .mapbase     = (IOP13XX_UART0_PHYS),
+       .membase     = IOP13XX_UART0_VIRT,
+       .mapbase     = IOP13XX_UART0_PHYS,
        .irq         = IRQ_IOP13XX_UART0,
        .uartclk     = IOP13XX_UART_XTAL,
        .regshift    = 2,
@@ -94,8 +84,8 @@ static struct plat_serial8250_port iop13xx_uart0_data[] = {
 
 static struct plat_serial8250_port iop13xx_uart1_data[] = {
 	{
-       .membase     = (char*)(IOP13XX_UART1_VIRT),
-       .mapbase     = (IOP13XX_UART1_PHYS),
+       .membase     = IOP13XX_UART1_VIRT,
+       .mapbase     = IOP13XX_UART1_PHYS,
        .irq         = IRQ_IOP13XX_UART1,
        .uartclk     = IOP13XX_UART_XTAL,
        .regshift    = 2,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index c15a100ba779..02e20c3912ba 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -183,7 +183,7 @@ static struct i2c_board_info __initdata glantank_i2c_devices[] = {
 
 static void glantank_power_off(void)
 {
-	__raw_writeb(0x01, 0xfe8d0004);
+	__raw_writeb(0x01, IOMEM(0xfe8d0004));
 
 	while (1)
 		;
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
deleted file mode 100644
index e2ada265bb8d..000000000000
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
deleted file mode 100644
index f7c1b6595660..000000000000
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/io.h
- *
- * Copyright (C) 2001  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index a9f80943d01f..fdf91a160884 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -53,24 +53,24 @@ static struct clock_event_device clockevent_ixp4xx;
  *************************************************************************/
 static struct map_desc ixp4xx_io_desc[] __initdata = {
 	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= IXP4XX_PERIPHERAL_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
 		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* Expansion Bus Config Registers */
-		.virtual	= IXP4XX_EXP_CFG_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
 		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PCI Registers */
-		.virtual	= IXP4XX_PCI_CFG_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	},
 #ifdef CONFIG_DEBUG_LL
 	{	/* Debug UART mapping */
-		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
+		.virtual	= (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
 		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
 		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index b2ef65db0e91..ebc0ba31ce85 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -14,6 +14,7 @@
 #ifndef __ASM_ARCH_CPU_H__
 #define __ASM_ARCH_CPU_H__
 
+#include <linux/io.h>
 #include <asm/cputype.h>
 
 /* Processor id value in CP15 Register 0 */
@@ -37,7 +38,7 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	u32 val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
 
 	if (cpu_is_ixp42x_rev_a0())
 		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
@@ -51,7 +52,7 @@ static inline u32 ixp4xx_read_feature_bits(void)
 
 static inline void ixp4xx_write_feature_bits(u32 value)
 {
-	*IXP4XX_EXP_CFG2 = ~value;
+	__raw_writel(~value, IXP4XX_EXP_CFG2);
 }
 
 #endif  /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
deleted file mode 100644
index ef37f2635b0e..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* empty */
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index 97c530f66e78..eb68b61ce975 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -49,21 +49,21 @@
  * Expansion BUS Configuration registers
  */
 #define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	IOMEM(0xFFBFE000)
 #define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
 
 /*
  * PCI Config registers
  */
 #define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFFBFF000)
 #define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
 
 /*
  * Peripheral space
  */
 #define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFFBEB000)
 #define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
 
 /*
@@ -73,7 +73,7 @@
  * aligned so that it * can be used with the low-level debug code.
  */
 #define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
+#define	IXP4XX_DEBUG_UART_BASE_VIRT	IOMEM(0xffb00000)
 #define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
@@ -92,7 +92,7 @@
 /*
  * Expansion Bus Controller registers.
  */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
 
 #define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
 #define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index ca5c15a4e626..50bca5032b7e 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -94,6 +94,13 @@ config MACH_TS219_DT
 	  or MV6282. If you have the wrong one, the buttons will not
 	  work.
 
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
 config MACH_GOFLEXNET_DT
 	bool "Seagate GoFlex Net (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -109,6 +116,20 @@ config MACH_LSXL_DT
 	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
 	  Flattened Device Tree.
 
+config MACH_IOMEGA_IX2_200_DT
+	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 055c85a1cc46..294779f892d9 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 2a576abf409b..760a0efe7580 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -1,13 +1,3 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
-dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
-dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
-dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
-dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index e9a7180863d9..8f0d162a1e1d 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void)
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    (void __iomem *) DDR_WINDOW_CPU_BASE);
 }
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 4ab35065a144..43d16d6714b8 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,18 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
 #include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio-fan.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -67,29 +57,6 @@ static unsigned int dnskw_mpp_config[] __initdata = {
 	0
 };
 
-/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-static struct gpio_fan_speed dnskw_fan_speed[] = {
-	{    0,  0 },
-	{ 3000,	 1 },
-	{ 6000,	 2 },
-};
-static unsigned dnskw_fan_pins[] = {46, 45};
-
-static struct gpio_fan_platform_data dnskw_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(dnskw_fan_pins),
-	.ctrl		= dnskw_fan_pins,
-	.num_speed	= ARRAY_SIZE(dnskw_fan_speed),
-	.speed		= dnskw_fan_speed,
-};
-
-static struct platform_device dnskw_fan_device = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dnskw_fan_data,
-	},
-};
-
 static void dnskw_power_off(void)
 {
 	gpio_set_value(36, 1);
@@ -114,8 +81,6 @@ void __init dnskw_init(void)
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&dnskw_ge00_data);
 
-	platform_device_register(&dnskw_fan_device);
-
 	/* Register power-off GPIO. */
 	if (gpio_request(36, "dnskw:power:off") == 0
 	    && gpio_direction_output(36, 0) == 0)
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
new file mode 100644
index 000000000000..f2fbb023e679
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+void __init dockstar_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index aeb234d0d0e3..20af53a56c0e 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e4eb450de301..70c5a2882409 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -33,6 +33,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
 	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
 	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
+	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
 	{},
 };
 
@@ -60,7 +61,6 @@ static void __init kirkwood_dt_init(void)
 	/* internal devices that every board has */
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
-	kirkwood_crypto_init();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
@@ -81,12 +81,21 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_dt_init();
+
 	if (of_machine_is_compatible("seagate,goflexnet"))
 		goflexnet_init();
 
 	if (of_machine_is_compatible("buffalo,lsxl"))
 		lsxl_init();
 
+	if (of_machine_is_compatible("iom,ix2-200"))
+		iomega_ix2_200_init();
+
+	if (of_machine_is_compatible("keymile,km_kirkwood"))
+		km_kirkwood_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table,
 			     kirkwood_auxdata_lookup, NULL);
 }
@@ -98,8 +107,11 @@ static const char *kirkwood_dt_board_compat[] = {
 	"iom,iconnect",
 	"raidsonic,ib-nas62x0",
 	"qnap,ts219",
+	"seagate,dockstar",
 	"seagate,goflexnet",
 	"buffalo,lsxl",
+	"iom,ix2-200",
+	"keymile,km_kirkwood",
 	NULL
 };
 
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 413e2c8ef5fe..001ca8c96980 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d7a9198ed300..d084b1e2943a 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -16,11 +16,8 @@
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
@@ -44,57 +41,12 @@ static unsigned int iconnect_mpp_config[] __initdata = {
 	0
 };
 
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "flash",
-		.offset = 0,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices  */
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= SW_LID,
-		.gpio		= 12,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	}, {
-		.type		= EV_SW,
-		.code		= SW_TABLET_MODE,
-		.gpio		= 35,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev        = {
-		.platform_data  = &iconnect_button_data,
-	},
-};
-
 void __init iconnect_init(void)
 {
 	kirkwood_mpp_conf(iconnect_mpp_config);
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&iconnect_ge00_data);
-
-	platform_device_register(&iconnect_button_device);
 }
 
 static int __init iconnect_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
new file mode 100644
index 000000000000..158fb97d0397
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+	.phy_addr       = MV643XX_ETH_PHY_NONE,
+	.speed          = SPEED_1000,
+	.duplex         = DUPLEX_FULL,
+};
+
+static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
+	MPP12_GPIO,			/* Reset Button */
+	MPP14_GPIO,			/* Power Button */
+	MPP15_GPIO,			/* Backup LED (blue) */
+	MPP16_GPIO,			/* Power LED (white) */
+	MPP35_GPIO,			/* OTB Button */
+	MPP36_GPIO,			/* Rebuild LED (white) */
+	MPP37_GPIO,			/* Health LED (red) */
+	MPP38_GPIO,			/* SATA LED brightness control 1 */
+	MPP39_GPIO,			/* SATA LED brightness control 2 */
+	MPP40_GPIO,			/* Backup LED brightness control 1 */
+	MPP41_GPIO,			/* Backup LED brightness control 2 */
+	MPP42_GPIO,			/* Power LED brightness control 1 */
+	MPP43_GPIO,			/* Power LED brightness control 2 */
+	MPP44_GPIO,			/* Health LED brightness control 1 */
+	MPP45_GPIO,			/* Health LED brightness control 2 */
+	MPP46_GPIO,			/* Rebuild LED brightness control 1 */
+	MPP47_GPIO,			/* Rebuild LED brightness control 2 */
+	0
+};
+
+void __init iomega_ix2_200_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
new file mode 100644
index 000000000000..f7d32834b757
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int km_kirkwood_mpp_config[] __initdata = {
+	MPP8_GPIO,	/* I2C SDA */
+	MPP9_GPIO,	/* I2C SCL */
+	0
+};
+
+void __init km_kirkwood_init(void)
+{
+	struct clk *sata_clk;
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(km_kirkwood_mpp_config);
+
+	/*
+	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
+	 * devices are also not present in this variant, their clocks get
+	 * disabled because unused when clk_disable_unused() gets called.
+	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+	 */
+	sata_clk = clk_get_sys("sata_mv.0", "0");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+	sata_clk = clk_get_sys("sata_mv.0", "1");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c4b64adcbfce..3991077f58a2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -26,15 +26,15 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -42,17 +42,7 @@
  ****************************************************************************/
 static struct map_desc kirkwood_io_desc[] __initdata = {
 	{
-		.virtual	= KIRKWOOD_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
-		.length		= KIRKWOOD_PCIE_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= KIRKWOOD_PCIE1_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
-		.length		= KIRKWOOD_PCIE1_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -215,8 +205,7 @@ static struct clk *tclk;
 
 static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 {
-	return clk_register_gate(NULL, name, "tclk", 0,
-				 (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				 bit_idx, 0, &gating_lock);
 }
 
@@ -225,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
 						    void (*fn_en)(void),
 						    void (*fn_dis)(void))
 {
-	return clk_register_gate_fn(NULL, name, "tclk", 0,
-				    (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				    bit_idx, 0, &gating_lock, fn_en, fn_dis);
 }
 
@@ -301,7 +289,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR);
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
 	/* The interface forgets the MAC address assigned by u-boot if
 	the clock is turned off, so claim the clk now. */
 	clk_prepare_enable(ge0);
@@ -315,7 +303,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR);
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
 	clk_prepare_enable(ge1);
 }
 
@@ -517,6 +505,13 @@ void __init kirkwood_wdt_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/*
+	 * Some Kirkwood devices allocate their coherent buffers from atomic
+	 * context. Increase size of atomic coherent pool to make sure such
+	 * the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int kirkwood_tclk;
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 304dd1abfdca..bcffd7ca1ca2 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -82,6 +82,12 @@ void ib62x0_init(void);
 static inline void ib62x0_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_GOFLEXNET_DT
 void goflexnet_init(void);
 #else
@@ -94,6 +100,18 @@ void lsxl_init(void);
 static inline void lsxl_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 6e1bac929ab5..2c1a453df201 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d93359379598..c49b177c1523 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
@@ -17,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 61d9a552a054..23dcb19cc2a7 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index bdaed3867d13..7cb55f982243 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index a115142f8690..5c82b7dce4e2 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,37 +13,37 @@
 
 #include <mach/kirkwood.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
 #define CPU_CONFIG_ERROR_PROP	0x00000004
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define CPU_RESET		0x00000002
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
 #define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
-#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE + 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
-#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE + 0x11c)
 #define CGC_BIT_GE0		(0)
 #define CGC_BIT_PEX0		(2)
 #define CGC_BIT_USB0		(3)
diff --git a/arch/arm/mach-kirkwood/include/mach/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h
deleted file mode 100644
index 84f340b546c0..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
deleted file mode 100644
index 5d0ab61700d2..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
-					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index c5b68510776b..041653a04a9c 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -37,17 +37,15 @@
 #define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
 #define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
-#define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE		SZ_64K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfee00000
 #define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_64K
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE		IOMEM(0xfed00000)
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
@@ -61,61 +59,61 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0100)
-#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0140)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0100)
+#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0140)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
 
 /*
  * Supported devices and revisions.
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
deleted file mode 100644
index 24b536ebdf13..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
- * Platform data structure for netxbig LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
-
-struct netxbig_gpio_ext {
-	unsigned	*addr;
-	int		num_addr;
-	unsigned	*data;
-	int		num_data;
-	unsigned	enable;
-};
-
-enum netxbig_led_mode {
-	NETXBIG_LED_OFF,
-	NETXBIG_LED_ON,
-	NETXBIG_LED_SATA,
-	NETXBIG_LED_TIMER1,
-	NETXBIG_LED_TIMER2,
-	NETXBIG_LED_MODE_NUM,
-};
-
-#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
-
-struct netxbig_led_timer {
-	unsigned long		delay_on;
-	unsigned long		delay_off;
-	enum netxbig_led_mode	mode;
-};
-
-struct netxbig_led {
-	const char	*name;
-	const char	*default_trigger;
-	int		mode_addr;
-	int		*mode_val;
-	int		bright_addr;
-};
-
-struct netxbig_led_platform_data {
-	struct netxbig_gpio_ext	*gpio_ext;
-	struct netxbig_led_timer *timer;
-	int			num_timer;
-	struct netxbig_led	*leds;
-	int			num_leds;
-};
-
-#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
deleted file mode 100644
index e21272e5f668..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
-
-struct ns2_led {
-	const char	*name;
-	const char	*default_trigger;
-	unsigned	cmd;
-	unsigned	slow;
-};
-
-struct ns2_led_platform_data {
-	int		num_leds;
-	struct ns2_led	*leds;
-};
-
-#endif /* __MACH_LEDS_NS2_H */
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 720063ffa19d..884703535a0a 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -10,7 +10,9 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include <plat/irq.h>
 
 static int __initdata gpio0_irqs[4] = {
@@ -29,14 +31,14 @@ static int __initdata gpio1_irqs[4] = {
 
 void __init kirkwood_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-49.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
-	orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
 }
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index e6bba01bae38..88b0788bacae 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -34,7 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 31ae8de34e93..a3b091470b8a 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 7e99c3f340fc..134ef50d58fc 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 6e8b2efa3c35..ec544918b12c 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
 void kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
 	kirkwood_enable_pcie();
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
 }
 
 struct pcie_port {
@@ -56,7 +56,7 @@ struct pcie_port {
 	void __iomem		*base;
 	spinlock_t		conf_lock;
 	int			irq;
-	struct resource		res[2];
+	struct resource		res;
 };
 
 static int pcie_port_map[2];
@@ -133,46 +133,30 @@ static struct pci_ops pcie_ops = {
 
 static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->base = PCIE_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
-	 * IORESOURCE_IO
-	 */
-	pp->res[0].name = "PCIe 0 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
-	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-	pp->res[0].flags = IORESOURCE_IO;
-
-	/*
 	 * IORESOURCE_MEM
 	 */
-	pp->res[1].name = "PCIe 0 MEM";
-	pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-	pp->res[1].flags = IORESOURCE_MEM;
+	pp->res.name = "PCIe 0 MEM";
+	pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	pp->res.flags = IORESOURCE_MEM;
 }
 
 static void __init pcie1_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->base = PCIE1_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE1;
 
 	/*
-	 * IORESOURCE_IO
-	 */
-	pp->res[0].name = "PCIe 1 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
-	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
-	pp->res[0].flags = IORESOURCE_IO;
-
-	/*
 	 * IORESOURCE_MEM
 	 */
-	pp->res[1].name = "PCIe 1 MEM";
-	pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
-	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
-	pp->res[1].flags = IORESOURCE_MEM;
+	pp->res.name = "PCIe 1 MEM";
+	pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+	pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+	pp->res.flags = IORESOURCE_MEM;
 }
 
 static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
@@ -197,23 +181,21 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	case 0:
 		kirkwood_enable_pcie_clk("0");
 		pcie0_ioresources_init(pp);
+		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
 		break;
 	case 1:
 		kirkwood_enable_pcie_clk("1");
 		pcie1_ioresources_init(pp);
+		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
 		break;
 	default:
 		panic("PCIe setup: invalid controller %d", index);
 	}
 
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe%d IO resource failed\n", index);
-	if (request_resource(&iomem_resource, &pp->res[1]))
+	if (request_resource(&iomem_resource, &pp->res))
 		panic("Request PCIe%d Memory resource failed\n", index);
 
-	sys->io_offset = 0;
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
 	/*
 	 * Generic PCIe unit setup.
@@ -273,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = {
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		printk(KERN_INFO "link up\n");
 		pcie_port_map[num_pcie_ports++] = index;
 	} else
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index f742a66a7045..19072c84008f 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -19,6 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index ef922079348b..9717101a7437 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 4ea70e5f7137..28d0abaf4bd9 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 5bbca2680442..367a9400f532 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
 		 * (Marvell 88sx7042/sata_mv) is known to stop working
 		 * after a few minutes.
 		 */
-		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+		orion_pcie_reset(PCIE_VIRT_BASE);
 
 		kirkwood_pcie_id(&dev, &rev);
 		if (dev == MV88F6282_DEV_ID)
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index f5c39a8c2b00..a545976bdbd6 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -21,6 +21,67 @@ config MACH_ACS5K
 	  say 'Y' here if you want your kernel to run on the Brivo
 	  Systems LLC, ACS-5000 Master board.
 
+config MACH_LITE300
+	bool "SecureComputing SG300"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  SecureComputing / SnapGear SG300 VPN Internet Router.
+	  See http://www.securecomputing.com for more details.
+
+config MACH_SG310
+	bool "McAfee SG310"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  McAfee / SnapGear SG310 VPN Internet Router.
+	  See http://www.mcafee.com for more details.
+
+config MACH_SE4200
+	bool "SecureComputing SE4200"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  SecureComputing / SnapGear SE4200 Secure Wireless VPN
+	  Internet Router.
+	  See http://www.securecomputing.com for more details.
+
+config MACH_CM4002
+	bool "OpenGear CM4002"
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  CM4002 Secure Access Server. See http://www.opengear.com for
+	  more details.
+
+config MACH_CM4008
+	bool "OpenGear CM4008"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  CM4008 Console Server. See http://www.opengear.com for more
+	  details.
+
+config MACH_CM41xx
+	bool "OpenGear CM41xx"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  CM4016 or CM4048 Console Servers. See http://www.opengear.com for
+	  more details.
+
+config MACH_IM4004
+	bool "OpenGear IM4004"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  IM4004 Secure Access Server. See http://www.opengear.com for
+	  more details.
+
+config MACH_IM42xx
+	bool "OpenGear IM42xx"
+	select MIGHT_HAVE_PCI
+	help
+	  Say 'Y' here if you want your kernel to support the OpenGear
+	  IM4216 or IM4248 Console Servers. See http://www.opengear.com for
+	  more details.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 853efd9133c6..e370caf0c91b 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,10 +11,15 @@ obj-				:=
 # PCI support is optional
 obj-$(CONFIG_PCI)		+= pci.o
 
-# LEDs
-obj-$(CONFIG_LEDS)		+= leds.o
-
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
 obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
 obj-$(CONFIG_MACH_ACS5K)	+= board-acs5k.o
+obj-$(CONFIG_MACH_LITE300)	+= board-sg.o
+obj-$(CONFIG_MACH_SG310)	+= board-sg.o
+obj-$(CONFIG_MACH_SE4200)	+= board-sg.o
+obj-$(CONFIG_MACH_CM4002)	+= board-og.o
+obj-$(CONFIG_MACH_CM4008)	+= board-og.o
+obj-$(CONFIG_MACH_CM41xx)	+= board-og.o
+obj-$(CONFIG_MACH_IM4004)	+= board-og.o
+obj-$(CONFIG_MACH_IM42xx)	+= board-og.o
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
new file mode 100644
index 000000000000..1623ba461e47
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -0,0 +1,199 @@
+/*
+ * board-og.c -- support for the OpenGear KS8695 based boards.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/devices.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+#include "generic.h"
+
+static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (machine_is_im4004() && (slot == 8))
+		return KS8695_IRQ_EXTERN1;
+	return KS8695_IRQ_EXTERN0;
+}
+
+static struct ks8695_pci_cfg __initdata og_pci = {
+	.mode		= KS8695_MODE_PCI,
+	.map_irq	= og_pci_map_irq,
+};
+
+static void __init og_register_pci(void)
+{
+	/* Initialize the GPIO lines for interrupt mode */
+	ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
+
+	/* Cardbus Slot */
+	if (machine_is_im4004())
+		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
+
+	ks8695_init_pci(&og_pci);
+}
+
+/*
+ * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here
+ * and bring the PCI bus out of reset.
+ */
+static void __init og_pci_bus_reset(void)
+{
+	unsigned int rstline = 1;
+
+	/* Some boards use a different GPIO as the PCI reset line */
+	if (machine_is_im4004())
+		rstline = 2;
+	else if (machine_is_im42xx())
+		rstline = 0;
+
+	gpio_request(rstline, "PCI reset");
+	gpio_direction_output(rstline, 0);
+
+	/* Drive a reset on the PCI reset line */
+	gpio_set_value(rstline, 1);
+	gpio_set_value(rstline, 0);
+	mdelay(100);
+	gpio_set_value(rstline, 1);
+	mdelay(100);
+}
+
+/*
+ * Direct connect serial ports (non-PCI that is).
+ */
+#define	S8250_PHYS	0x03800000
+#define	S8250_VIRT	0xf4000000
+#define	S8250_SIZE	0x00100000
+
+static struct __initdata map_desc og_io_desc[] = {
+	{
+		.virtual	= S8250_VIRT,
+		.pfn		= __phys_to_pfn(S8250_PHYS),
+		.length		= S8250_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+static struct resource og_uart_resources[] = {
+	{
+		.start		= S8250_VIRT,
+		.end		= S8250_VIRT + S8250_SIZE,
+		.flags		= IORESOURCE_MEM
+	},
+};
+
+static struct plat_serial8250_port og_uart_data[] = {
+	{
+		.mapbase	= S8250_VIRT,
+		.membase	= (char *) S8250_VIRT,
+		.irq		= 3,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 115200 * 16,
+	},
+	{ },
+};
+
+static struct platform_device og_uart = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev.platform_data	= og_uart_data,
+	.num_resources		= 1,
+	.resource		= og_uart_resources
+};
+
+static struct platform_device *og_devices[] __initdata = {
+	&og_uart
+};
+
+static void __init og_init(void)
+{
+	ks8695_register_gpios();
+
+	if (machine_is_cm4002()) {
+		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH);
+		iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc));
+		platform_add_devices(og_devices, ARRAY_SIZE(og_devices));
+	} else {
+		og_pci_bus_reset();
+		og_register_pci();
+	}
+
+	ks8695_add_device_lan();
+	ks8695_add_device_wan();
+}
+
+#ifdef CONFIG_MACH_CM4002
+MACHINE_START(CM4002, "OpenGear/CM4002")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CM4008
+MACHINE_START(CM4008, "OpenGear/CM4008")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CM41xx
+MACHINE_START(CM41XX, "OpenGear/CM41xx")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_IM4004
+MACHINE_START(IM4004, "OpenGear/IM4004")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_IM42xx
+MACHINE_START(IM42XX, "OpenGear/IM42xx")
+	/* OpenGear Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= og_init,
+	.timer		= &ks8695_timer,
+	.restart        = ks8695_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
new file mode 100644
index 000000000000..f35b98b5bf37
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -0,0 +1,121 @@
+/*
+ * board-sg.c -- support for the SnapGear KS8695 based boards
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/devices.h>
+#include "generic.h"
+
+/*
+ * The SG310 machine type is fitted with a conventional 8MB Strataflash
+ * device. Define its partitioning.
+ */
+#define	FL_BASE		0x02000000
+#define	FL_SIZE		SZ_8M
+
+static struct mtd_partition sg_mtd_partitions[] = {
+	[0] = {
+		.name	= "SnapGear Boot Loader",
+		.size	= SZ_128K,
+	},
+	[1] = {
+		.name	= "SnapGear non-volatile configuration",
+		.size	= SZ_512K,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "SnapGear image",
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "SnapGear StrataFlash",
+	},
+	[4] = {
+		.name	= "SnapGear Boot Tags",
+		.size	= SZ_128K,
+		.offset	= SZ_128K,
+	},
+};
+
+static struct physmap_flash_data sg_mtd_pdata = {
+	.width		= 1,
+	.nr_parts	= ARRAY_SIZE(sg_mtd_partitions),
+	.parts		= sg_mtd_partitions,
+};
+
+
+static struct resource sg_mtd_resource[] = {
+	[0] = {
+		.start = FL_BASE,
+		.end   = FL_BASE + FL_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sg_mtd_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sg_mtd_resource),
+	.resource	= sg_mtd_resource,
+	.dev		= {
+		.platform_data = &sg_mtd_pdata,
+	},
+};
+
+static void __init sg_init(void)
+{
+	ks8695_add_device_lan();
+	ks8695_add_device_wan();
+
+	if (machine_is_sg310())
+		platform_device_register(&sg_mtd_device);
+}
+
+#ifdef CONFIG_MACH_LITE300
+MACHINE_START(LITE300, "SecureComputing/SG300")
+	/* SnapGear */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= sg_init,
+	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SG310
+MACHINE_START(SG310, "McAfee/SG310")
+	/* SnapGear */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= sg_init,
+	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SE4200
+MACHINE_START(SE4200, "SecureComputing/SE4200")
+	/* SnapGear */
+	.atag_offset	= 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= sg_init,
+	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 7f3f24053a00..ddb24222918e 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -36,7 +36,7 @@
 
 static struct __initdata map_desc ks8695_io_desc[] = {
 	{
-		.virtual	= KS8695_IO_VA,
+		.virtual	= (unsigned long)KS8695_IO_VA,
 		.pfn		= __phys_to_pfn(KS8695_IO_PA),
 		.length		= KS8695_IO_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 73bd63812878..47399bc3c024 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -182,27 +182,6 @@ static void __init ks8695_add_device_watchdog(void)
 }
 
 
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	gpio_direction_output(cpu_led, 1);
-	gpio_direction_output(timer_led, 1);
-
-	ks8695_leds_cpu	  = cpu_led;
-	ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
 /* -------------------------------------------------------------------- */
 
 /*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9aa7d13..1e6594a0f297 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
 extern void __init ks8695_add_device_lan(void);
 extern void __init ks8695_add_device_hpna(void);
 
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
  /* PCI */
 #define KS8695_MODE_PCI		0
 #define KS8695_MODE_MINIPCI	1
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index 5e0c388143da..5090338c0db2 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -33,7 +33,7 @@
  * head debug code as the initial MMU setup only deals in L1 sections.
  */
 #define KS8695_IO_PA		0x03F00000
-#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_VA		IOMEM(0xF0000000)
 #define KS8695_IO_SIZE		SZ_1M
 
 #define KS8695_PCIMEM_PA	0x60000000
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
deleted file mode 100644
index e620cda99d2d..000000000000
--- a/arch/arm/mach-ks8695/include/mach/regs-timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
-#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON		(0x00)		/* Timer Control Register */
-#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
-#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
-#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
-#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
-#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
-
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 9495cb4d701a..8879d610308a 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -19,15 +19,15 @@
 
 static void putc(char c)
 {
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+	while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
 		barrier();
 
-	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+	__raw_writel(c, (void __iomem*)KS8695_UART_PA + KS8695_URTH);
 }
 
 static inline void flush(void)
 {
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+	while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
 		barrier();
 }
 
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 4bd707547293..000000000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
-	gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
-	gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
-	unsigned long is_off = gpio_get_value(led);
-	if (is_off)
-		ks8695_led_on(led);
-	else
-		ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		ks8695_led_toggle(ks8695_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-		return -ENODEV;
-
-	leds_event = ks8695_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index ec783a3070ae..46c84bc7792c 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -25,53 +25,98 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
-#include <mach/regs-timer.h>
 #include <mach/regs-irq.h>
 
 #include "generic.h"
 
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
 /*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
+ * Timer registers
  */
-static unsigned long ks8695_gettimeoffset (void)
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+static void ks8695_set_mode(enum clock_event_mode mode,
+			    struct clock_event_device *evt)
 {
-	unsigned long elapsed, tick2, intpending;
+	u32 tmcon;
 
-	/*
-	 * Get the current number of ticks.  Note that there is a race
-	 * condition between us reading the timer and checking for an
-	 * interrupt.  We solve this by ensuring that the counter has not
-	 * reloaded between our two reads.
-	 */
-	elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
-	do {
-		tick2 = elapsed;
-		intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
-		elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
-	} while (elapsed > tick2);
-
-	/* Convert to number of ticks expired (not remaining) */
-	elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
-
-	/* Is interrupt pending?  If so, then timer has been reloaded already. */
-	if (intpending)
-		elapsed += (CLOCK_TICK_RATE / HZ);
-
-	/* Convert ticks to usecs */
-	return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+	if (mode == CLOCK_EVT_FEAT_PERIODIC) {
+		u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
+		u32 half = DIV_ROUND_CLOSEST(rate, 2);
+
+		/* Disable timer 1 */
+		tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+		tmcon &= ~TMCON_T1EN;
+		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+		/* Both registers need to count down */
+		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+
+		/* Re-enable timer1 */
+		tmcon |= TMCON_T1EN;
+		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+	}
 }
 
+static int ks8695_set_next_event(unsigned long cycles,
+				 struct clock_event_device *evt)
+
+{
+	u32 half = DIV_ROUND_CLOSEST(cycles, 2);
+	u32 tmcon;
+
+	/* Disable timer 1 */
+	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	tmcon &= ~TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* Both registers need to count down */
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+
+	/* Re-enable timer1 */
+	tmcon |= TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+	return 0;
+}
+
+static struct clock_event_device clockevent_ks8695 = {
+	.name		= "ks8695_t1tc",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event	= ks8695_set_next_event,
+	.set_mode	= ks8695_set_mode,
+};
+
 /*
  * IRQ handler for the timer.
  */
 static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &clockevent_ks8695;
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -83,18 +128,22 @@ static struct irqaction ks8695_timer_irq = {
 
 static void ks8695_timer_setup(void)
 {
-	unsigned long tmout = CLOCK_TICK_RATE / HZ;
 	unsigned long tmcon;
 
-	/* disable timer1 */
-	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	__raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
-	__raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
+	/* Disable timer 0 and 1 */
+	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	tmcon &= ~TMCON_T0EN;
+	tmcon &= ~TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
 
-	/* re-enable timer1 */
-	__raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+	/*
+	 * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles
+	 * (one on each counter) maximum 2*2^32, but the API will only
+	 * accept up to a 32bit full word (0xFFFFFFFFU).
+	 */
+	clockevents_config_and_register(&clockevent_ks8695,
+					KS8695_CLOCK_RATE, 2,
+					0xFFFFFFFFU);
 }
 
 static void __init ks8695_timer_init (void)
@@ -107,8 +156,6 @@ static void __init ks8695_timer_init (void)
 
 struct sys_timer ks8695_timer = {
 	.init		= ks8695_timer_init,
-	.offset		= ks8695_gettimeoffset,
-	.resume		= ks8695_timer_setup,
 };
 
 void ks8695_restart(char mode, const char *cmd)
@@ -119,12 +166,12 @@ void ks8695_restart(char mode, const char *cmd)
 		soft_restart(0);
 
 	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
 
 	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+	writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
 
 	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
 }
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
index 697323b5f92d..d7392a475247 100644
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -1,5 +1,3 @@
    zreladdr-y	+= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x82000000
-
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index a48dc2dec485..0d4db8c544b5 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -177,25 +177,25 @@ u32 clk_get_pclk_div(void)
 
 static struct map_desc lpc32xx_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_AHB0_START),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_AHB0_START),
 		.pfn		= __phys_to_pfn(LPC32XX_AHB0_START),
 		.length		= LPC32XX_AHB0_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_AHB1_START),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_AHB1_START),
 		.pfn		= __phys_to_pfn(LPC32XX_AHB1_START),
 		.length		= LPC32XX_AHB1_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_FABAPB_START),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_FABAPB_START),
 		.pfn		= __phys_to_pfn(LPC32XX_FABAPB_START),
 		.length		= LPC32XX_FABAPB_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= IO_ADDRESS(LPC32XX_IRAM_BASE),
+		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_IRAM_BASE),
 		.pfn		= __phys_to_pfn(LPC32XX_IRAM_BASE),
 		.length		= (LPC32XX_IRAM_BANK_SIZE * 2),
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
index 1816e22a3479..a544e962a818 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
@@ -30,7 +30,7 @@
 #define LPC32XX_GPIO_P1_MAX 24
 #define LPC32XX_GPIO_P2_MAX 13
 #define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPI_P3_MAX 29
 #define LPC32XX_GPO_P3_MAX 24
 
 #define LPC32XX_GPIO_P0_GRP 0
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
index 33e1dde37bd9..69065de97a3d 100644
--- a/arch/arm/mach-lpc32xx/include/mach/hardware.h
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -25,7 +25,7 @@
 /*
  * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
  */
-#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
 			 IO_BASE)
 
 #define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index 5b1cc35e6fba..3c6332753358 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -283,21 +283,25 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 	case IRQ_TYPE_EDGE_RISING:
 		/* Rising edge sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 1, 1);
+		__irq_set_handler_locked(d->hwirq, handle_edge_irq);
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
 		/* Falling edge sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 0, 1);
+		__irq_set_handler_locked(d->hwirq, handle_edge_irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
 		/* Low level sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 0, 0);
+		__irq_set_handler_locked(d->hwirq, handle_level_irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
 		/* High level sensitive */
 		__lpc32xx_set_irq_type(d->hwirq, 1, 0);
+		__irq_set_handler_locked(d->hwirq, handle_level_irq);
 		break;
 
 	/* Other modes are not supported */
@@ -305,9 +309,6 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 		return -EINVAL;
 	}
 
-	/* Ok to use the level handler for all types */
-	irq_set_handler(d->hwirq, handle_level_irq);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index b07dcc90829d..e8ff4c3f0566 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -24,12 +24,9 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 #include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/amba/pl022.h>
 #include <linux/amba/pl08x.h>
 #include <linux/amba/mmci.h>
 #include <linux/of.h>
@@ -37,6 +34,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
+#include <linux/mtd/lpc32xx_slc.h>
+#include <linux/mtd/lpc32xx_mlc.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -156,21 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = {
 	.remove		= lpc32xx_clcd_remove,
 };
 
-/*
- * AMBA SSP (SPI)
- */
-static struct pl022_ssp_controller lpc32xx_ssp0_data = {
-	.bus_id			= 0,
-	.num_chipselect		= 1,
-	.enable_dma		= 0,
-};
-
-static struct pl022_ssp_controller lpc32xx_ssp1_data = {
-	.bus_id			= 1,
-	.num_chipselect		= 1,
-	.enable_dma		= 0,
-};
-
 static struct pl08x_channel_data pl08x_slave_channels[] = {
 	{
 		.bus_id = "nand-slc",
@@ -223,13 +207,25 @@ static struct mmci_platform_data lpc32xx_mmci_data = {
 	 * gather, and the MMCI driver doesn't do it this way */
 };
 
+static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
+	.dma_filter = pl08x_filter_id,
+};
+
+static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
+	.dma_filter = pl08x_filter_id,
+};
+
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
-	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
+	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
+	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
 	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
 	OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
 		       &lpc32xx_mmci_data),
+	OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
+		       &lpc32xx_slc_data),
+	OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
+		       &lpc32xx_mlc_data),
 	{ }
 };
 
@@ -253,12 +249,6 @@ static void __init lpc3250_machine_init(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     lpc32xx_auxdata_lookup, NULL);
-
-	/* Register GPIOs used on this board */
-	if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
-		pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
-	else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
-		pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
 }
 
 static char const *lpc32xx_dt_compat[] __initdata = {
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 7fddd01b85b9..d697d07a1bf0 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -108,18 +108,21 @@ endmenu
 config CPU_PXA168
 	bool
 	select CPU_MOHAWK
+	select COMMON_CLK
 	help
 	  Select code specific to PXA168
 
 config CPU_PXA910
 	bool
 	select CPU_MOHAWK
+	select COMMON_CLK
 	help
 	  Select code specific to PXA910
 
 config CPU_MMP2
 	bool
 	select CPU_PJ4
+	select COMMON_CLK
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index b786f7e6cd1f..095c155d6fb8 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,13 +2,19 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o time.o irq.o
+obj-y				+= common.o devices.o time.o irq.o
 
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
 obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= mmp2.o sram.o
 
+ifeq ($(CONFIG_COMMON_CLK), )
+obj-y				+= clock.o
+obj-$(CONFIG_CPU_PXA168)	+= clock-pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= clock-pxa910.o
+obj-$(CONFIG_CPU_MMP2)		+= clock-mmp2.o
+endif
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 223090b1444d..e5dba9c5dc54 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -27,7 +27,7 @@
 #include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c
new file mode 100644
index 000000000000..21d22002cd19
--- /dev/null
+++ b/arch/arm/mach-mmp/clock-mmp2.c
@@ -0,0 +1,111 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_RTC	APBC_REG(0x000)
+#define APBC_TWSI1	APBC_REG(0x004)
+#define APBC_TWSI2	APBC_REG(0x008)
+#define APBC_TWSI3	APBC_REG(0x00c)
+#define APBC_TWSI4	APBC_REG(0x010)
+#define APBC_KPC	APBC_REG(0x018)
+#define APBC_UART1	APBC_REG(0x02c)
+#define APBC_UART2	APBC_REG(0x030)
+#define APBC_UART3	APBC_REG(0x034)
+#define APBC_GPIO	APBC_REG(0x038)
+#define APBC_PWM0	APBC_REG(0x03c)
+#define APBC_PWM1	APBC_REG(0x040)
+#define APBC_PWM2	APBC_REG(0x044)
+#define APBC_PWM3	APBC_REG(0x048)
+#define APBC_SSP0	APBC_REG(0x04c)
+#define APBC_SSP1	APBC_REG(0x050)
+#define APBC_SSP2	APBC_REG(0x054)
+#define APBC_SSP3	APBC_REG(0x058)
+#define APBC_SSP4	APBC_REG(0x05c)
+#define APBC_SSP5	APBC_REG(0x060)
+#define APBC_TWSI5	APBC_REG(0x07c)
+#define APBC_TWSI6	APBC_REG(0x080)
+#define APBC_UART4	APBC_REG(0x088)
+
+#define APMU_USB	APMU_REG(0x05c)
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_SDH0	APMU_REG(0x054)
+#define APMU_SDH1	APMU_REG(0x058)
+#define APMU_SDH2	APMU_REG(0x0e8)
+#define APMU_SDH3	APMU_REG(0x0ec)
+
+static void sdhc_clk_enable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst  =  __raw_readl(clk->clk_rst);
+	clk_rst |= clk->enable_val;
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst  =  __raw_readl(clk->clk_rst);
+	clk_rst &= ~clk->enable_val;
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+	.enable		= sdhc_clk_enable,
+	.disable	= sdhc_clk_disable,
+};
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 26000000);
+static APBC_CLK(uart2, UART2, 1, 26000000);
+static APBC_CLK(uart3, UART3, 1, 26000000);
+static APBC_CLK(uart4, UART4, 1, 26000000);
+static APBC_CLK(twsi1, TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, TWSI6, 0, 26000000);
+static APBC_CLK(gpio, GPIO, 0, 26000000);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
+
+static struct clk_lookup mmp2_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
+};
+
+void __init mmp2_clk_init(void)
+{
+	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+}
diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c
new file mode 100644
index 000000000000..5e6c18ccebd4
--- /dev/null
+++ b/arch/arm/mach-mmp/clock-pxa168.c
@@ -0,0 +1,91 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_UART1	APBC_REG(0x000)
+#define APBC_UART2	APBC_REG(0x004)
+#define APBC_GPIO	APBC_REG(0x008)
+#define APBC_PWM1	APBC_REG(0x00c)
+#define APBC_PWM2	APBC_REG(0x010)
+#define APBC_PWM3	APBC_REG(0x014)
+#define APBC_PWM4	APBC_REG(0x018)
+#define APBC_RTC	APBC_REG(0x028)
+#define APBC_TWSI0	APBC_REG(0x02c)
+#define APBC_KPC	APBC_REG(0x030)
+#define APBC_TWSI1	APBC_REG(0x06c)
+#define APBC_UART3	APBC_REG(0x070)
+#define APBC_SSP1	APBC_REG(0x81c)
+#define APBC_SSP2	APBC_REG(0x820)
+#define APBC_SSP3	APBC_REG(0x84c)
+#define APBC_SSP4	APBC_REG(0x858)
+#define APBC_SSP5	APBC_REG(0x85c)
+
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_LCD	APMU_REG(0x04c)
+#define APMU_ETH	APMU_REG(0x0fc)
+#define APMU_USB	APMU_REG(0x05c)
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 14745600);
+static APBC_CLK(uart2, UART2, 1, 14745600);
+static APBC_CLK(uart3, UART3, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(ssp1, SSP1, 4, 0);
+static APBC_CLK(ssp2, SSP2, 4, 0);
+static APBC_CLK(ssp3, SSP3, 4, 0);
+static APBC_CLK(ssp4, SSP4, 4, 0);
+static APBC_CLK(ssp5, SSP5, 4, 0);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(keypad, KPC, 0, 32000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
+static APMU_CLK(usb, USB, 0x12, 0);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
+	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
+	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
+	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
+	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
+	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa168_clk_init(void)
+{
+	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+}
diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c
new file mode 100644
index 000000000000..933ea71d0b56
--- /dev/null
+++ b/arch/arm/mach-mmp/clock-pxa910.c
@@ -0,0 +1,67 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_UART0	APBC_REG(0x000)
+#define APBC_UART1	APBC_REG(0x004)
+#define APBC_GPIO	APBC_REG(0x008)
+#define APBC_PWM1	APBC_REG(0x00c)
+#define APBC_PWM2	APBC_REG(0x010)
+#define APBC_PWM3	APBC_REG(0x014)
+#define APBC_PWM4	APBC_REG(0x018)
+#define APBC_SSP1	APBC_REG(0x01c)
+#define APBC_SSP2	APBC_REG(0x020)
+#define APBC_RTC	APBC_REG(0x028)
+#define APBC_TWSI0	APBC_REG(0x02c)
+#define APBC_KPC	APBC_REG(0x030)
+#define APBC_SSP3	APBC_REG(0x04c)
+#define APBC_TWSI1	APBC_REG(0x06c)
+
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_USB	APMU_REG(0x05c)
+
+static APBC_CLK(uart1, UART0, 1, 14745600);
+static APBC_CLK(uart2, UART1, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa910_clk_init(void)
+{
+	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 1c9d6c1ea97a..bd453274fca2 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -7,3 +7,6 @@ extern void timer_init(int irq);
 extern void __init icu_init_irq(void);
 extern void __init mmp_map_io(void);
 extern void mmp_restart(char, const char *);
+extern void __init pxa168_clk_init(void);
+extern void __init pxa910_clk_init(void);
+extern void __init mmp2_clk_init(void);
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index b6f14d203c25..5c3cc29688ab 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -9,13 +9,21 @@
  * published by the Free Software Foundation.
  */
 
+#if defined(CONFIG_DEBUG_MMP_UART2)
+#define MMP_UART_OFFSET	0x00017000
+#elif defined(CONFIG_DEBUG_MMP_UART3)
+#define MMP_UART_OFFSET	0x00018000
+#else
+#error "Select uart for DEBUG_LL"
+#endif
+
 #include <mach/addr-map.h>
 
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =APB_PHYS_BASE		@ physical
 		ldr	\rv, =APB_VIRT_BASE		@ virtual
-		orr	\rp, \rp, #0x00017000
-		orr	\rv, \rv, #0x00017000
+		orr	\rp, \rp, #MMP_UART_OFFSET
+		orr	\rv, \rv, #MMP_UART_OFFSET
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index cba22fed2265..c4ca4d17194a 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -13,7 +13,7 @@ extern void mmp2_clear_pmic_int(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 09dcd6e2b6a8..37632d964d50 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -11,9 +11,9 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 793634c837ef..3b58a3b2d7df 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -9,7 +9,7 @@ extern void __init pxa910_init_irq(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 68b0c93ec6a1..ddc812f40341 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -13,101 +13,6 @@
 
 #include <mach/addr-map.h>
 
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_PXA168_UART1	APBC_REG(0x000)
-#define APBC_PXA168_UART2	APBC_REG(0x004)
-#define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM1	APBC_REG(0x00c)
-#define APBC_PXA168_PWM2	APBC_REG(0x010)
-#define APBC_PXA168_PWM3	APBC_REG(0x014)
-#define APBC_PXA168_PWM4	APBC_REG(0x018)
-#define APBC_PXA168_RTC		APBC_REG(0x028)
-#define APBC_PXA168_TWSI0	APBC_REG(0x02c)
-#define APBC_PXA168_KPC		APBC_REG(0x030)
-#define APBC_PXA168_TIMERS	APBC_REG(0x034)
-#define APBC_PXA168_AIB		APBC_REG(0x03c)
-#define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
-#define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA168_ASFAR	APBC_REG(0x050)
-#define APBC_PXA168_ASSAR	APBC_REG(0x054)
-#define APBC_PXA168_TWSI1	APBC_REG(0x06c)
-#define APBC_PXA168_UART3	APBC_REG(0x070)
-#define APBC_PXA168_AC97	APBC_REG(0x084)
-#define APBC_PXA168_SSP1	APBC_REG(0x81c)
-#define APBC_PXA168_SSP2	APBC_REG(0x820)
-#define APBC_PXA168_SSP3	APBC_REG(0x84c)
-#define APBC_PXA168_SSP4	APBC_REG(0x858)
-#define APBC_PXA168_SSP5	APBC_REG(0x85c)
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_PXA910_UART0	APBC_REG(0x000)
-#define APBC_PXA910_UART1	APBC_REG(0x004)
-#define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM1	APBC_REG(0x00c)
-#define APBC_PXA910_PWM2	APBC_REG(0x010)
-#define APBC_PXA910_PWM3	APBC_REG(0x014)
-#define APBC_PXA910_PWM4	APBC_REG(0x018)
-#define APBC_PXA910_SSP1	APBC_REG(0x01c)
-#define APBC_PXA910_SSP2	APBC_REG(0x020)
-#define APBC_PXA910_IPC		APBC_REG(0x024)
-#define APBC_PXA910_RTC		APBC_REG(0x028)
-#define APBC_PXA910_TWSI0	APBC_REG(0x02c)
-#define APBC_PXA910_KPC		APBC_REG(0x030)
-#define APBC_PXA910_TIMERS	APBC_REG(0x034)
-#define APBC_PXA910_TBROT	APBC_REG(0x038)
-#define APBC_PXA910_AIB		APBC_REG(0x03c)
-#define APBC_PXA910_SW_JTAG	APBC_REG(0x040)
-#define APBC_PXA910_TIMERS1	APBC_REG(0x044)
-#define APBC_PXA910_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA910_SSP3	APBC_REG(0x04c)
-#define APBC_PXA910_ASFAR	APBC_REG(0x050)
-#define APBC_PXA910_ASSAR	APBC_REG(0x054)
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_MMP2_RTC		APBC_REG(0x000)
-#define APBC_MMP2_TWSI1		APBC_REG(0x004)
-#define APBC_MMP2_TWSI2		APBC_REG(0x008)
-#define APBC_MMP2_TWSI3		APBC_REG(0x00c)
-#define APBC_MMP2_TWSI4		APBC_REG(0x010)
-#define APBC_MMP2_ONEWIRE	APBC_REG(0x014)
-#define APBC_MMP2_KPC		APBC_REG(0x018)
-#define APBC_MMP2_TB_ROTARY	APBC_REG(0x01c)
-#define APBC_MMP2_SW_JTAG	APBC_REG(0x020)
-#define APBC_MMP2_TIMERS	APBC_REG(0x024)
-#define APBC_MMP2_UART1		APBC_REG(0x02c)
-#define APBC_MMP2_UART2		APBC_REG(0x030)
-#define APBC_MMP2_UART3		APBC_REG(0x034)
-#define APBC_MMP2_GPIO		APBC_REG(0x038)
-#define APBC_MMP2_PWM0		APBC_REG(0x03c)
-#define APBC_MMP2_PWM1		APBC_REG(0x040)
-#define APBC_MMP2_PWM2		APBC_REG(0x044)
-#define APBC_MMP2_PWM3		APBC_REG(0x048)
-#define APBC_MMP2_SSP0		APBC_REG(0x04c)
-#define APBC_MMP2_SSP1		APBC_REG(0x050)
-#define APBC_MMP2_SSP2		APBC_REG(0x054)
-#define APBC_MMP2_SSP3		APBC_REG(0x058)
-#define APBC_MMP2_SSP4		APBC_REG(0x05c)
-#define APBC_MMP2_SSP5		APBC_REG(0x060)
-#define APBC_MMP2_AIB		APBC_REG(0x064)
-#define APBC_MMP2_ASFAR		APBC_REG(0x068)
-#define APBC_MMP2_ASSAR		APBC_REG(0x06c)
-#define APBC_MMP2_USIM		APBC_REG(0x070)
-#define APBC_MMP2_MPMU		APBC_REG(0x074)
-#define APBC_MMP2_IPC		APBC_REG(0x078)
-#define APBC_MMP2_TWSI5		APBC_REG(0x07c)
-#define APBC_MMP2_TWSI6		APBC_REG(0x080)
-#define APBC_MMP2_TWSI_INTSTS	APBC_REG(0x084)
-#define APBC_MMP2_UART4		APBC_REG(0x088)
-#define APBC_MMP2_RIPC		APBC_REG(0x08c)
-#define APBC_MMP2_THSENS1	APBC_REG(0x090)	/* Thermal Sensor */
-#define APBC_MMP2_THSENS_INTSTS	APBC_REG(0x0a4)
-
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 7af8deb63e83..93c8d0e29bb9 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -13,21 +13,6 @@
 
 #include <mach/addr-map.h>
 
-/* Clock Reset Control */
-#define APMU_IRE	APMU_REG(0x048)
-#define APMU_LCD	APMU_REG(0x04c)
-#define APMU_CCIC	APMU_REG(0x050)
-#define APMU_SDH0	APMU_REG(0x054)
-#define APMU_SDH1	APMU_REG(0x058)
-#define APMU_USB	APMU_REG(0x05c)
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_DMA	APMU_REG(0x064)
-#define APMU_GEU	APMU_REG(0x068)
-#define APMU_BUS	APMU_REG(0x06c)
-#define APMU_SDH2	APMU_REG(0x0e8)
-#define APMU_SDH3	APMU_REG(0x0ec)
-#define APMU_ETH	APMU_REG(0x0fc)
-
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)
 #define APMU_FNRST_DIS	(1 << 1)
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
deleted file mode 100644
index 239e0fc1bb1f..000000000000
--- a/arch/arm/mach-mmp/include/mach/sram.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/include/mach/sram.h
- *
- *  SRAM Memory Management
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY	512
-
-enum sram_type {
-	MMP_SRAM_UNDEFINED = 0,
-	MMP_ASRAM,
-	MMP_ISRAM,
-};
-
-struct sram_platdata {
-	char *pool_name;
-	int granularity;
-};
-
-extern struct gen_pool *sram_get_gpool(char *pool_name);
-
-#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
index e60c7d98922b..3c71246cd994 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq.c
@@ -153,10 +153,8 @@ static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc)
 		status = readl_relaxed(data->reg_status) & ~mask;
 		if (status == 0)
 			break;
-		n = find_first_bit(&status, BITS_PER_LONG);
-		while (n < BITS_PER_LONG) {
+		for_each_set_bit(n, &status, BITS_PER_LONG) {
 			generic_handle_irq(icu_data[i].virq_base + n);
-			n = find_next_bit(&status, BITS_PER_LONG, n + 1);
 		}
 	}
 }
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index c709a24a9d25..3a3768c7a191 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -20,7 +20,6 @@
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/dma.h>
@@ -29,7 +28,6 @@
 #include <mach/mmp2.h>
 
 #include "common.h"
-#include "clock.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -98,95 +96,36 @@ void __init mmp2_init_irq(void)
 	mmp2_init_icu();
 }
 
-static void sdhc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst |= clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst &= ~clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
-	.enable		= sdhc_clk_enable,
-	.disable	= sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
-static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
-static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
-static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
-static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
-	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
-	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
-	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
 static int __init mmp2_init(void)
 {
 	if (cpu_is_mmp2()) {
 #ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init();
+		tauros2_init(0);
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(mmp2_addr_map);
 		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
-		clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+		mmp2_clk_init();
 	}
 
 	return 0;
 }
 postcore_initcall(mmp2_init);
 
+#define APBC_TIMERS	APBC_REG(0x024)
+
 static void __init mmp2_timer_init(void)
 {
 	unsigned long clk_rst;
 
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 
 	/*
 	 * enable bus/functional clock, enable 6.5MHz (divider 4),
 	 * release reset
 	 */
 	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+	__raw_writel(clk_rst, APBC_TIMERS);
 
 	timer_init(IRQ_MMP2_TIMER1);
 }
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 62d787c34475..b7f074f15498 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -18,8 +18,8 @@
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
-#include <mach/addr-map.h>
 #include <mach/cputype.h>
+#include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
 #include <mach/irqs.h>
@@ -50,62 +50,13 @@ void __init pxa168_init_irq(void)
 	icu_init_irq();
 }
 
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
-static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
-static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
-static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
-static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
-static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
-static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
-static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
-static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
-static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
-static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
-	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
-	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
-	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
-	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
-	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
 static int __init pxa168_init(void)
 {
 	if (cpu_is_pxa168()) {
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa168_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+		pxa168_clk_init();
 	}
 
 	return 0;
@@ -114,6 +65,7 @@ postcore_initcall(pxa168_init);
 
 /* system timer - clock enabled, 3.25MHz */
 #define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS	APBC_REG(0x34)
 
 static void __init pxa168_timer_init(void)
 {
@@ -121,10 +73,10 @@ static void __init pxa168_timer_init(void)
 	 * ourselves instead of using clk_* API. Clock rate is defined
 	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
 	 */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 
 	/* 3.25MHz, bus/functional clock enabled, release reset */
-	__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
 	timer_init(IRQ_PXA168_TIMER1);
 }
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 6da52e9f2bdc..8b1e16fbb7a5 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -14,10 +14,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/dma.h>
@@ -25,7 +25,6 @@
 #include <mach/devices.h>
 
 #include "common.h"
-#include "clock.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -82,44 +81,16 @@ void __init pxa910_init_irq(void)
 	icu_init_irq();
 }
 
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
-static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
-static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
-static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
 static int __init pxa910_init(void)
 {
 	if (cpu_is_pxa910()) {
+#ifdef CONFIG_CACHE_TAUROS2
+		tauros2_init(0);
+#endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa910_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+		pxa910_clk_init();
 	}
 
 	return 0;
@@ -128,12 +99,13 @@ postcore_initcall(pxa910_init);
 
 /* system timer - clock enabled, 3.25MHz */
 #define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS	APBC_REG(0x34)
 
 static void __init pxa910_timer_init(void)
 {
 	/* reset and configure */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
-	__raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
+	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
 	timer_init(IRQ_PXA910_AP1_TIMER1);
 }
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 4304f9519372..a6c08ede4491 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/genalloc.h>
 
-#include <mach/sram.h>
+#include <linux/platform_data/dma-mmp_tdma.h>
 
 struct sram_bank_info {
 	char *pool_name;
@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret = 0;
 
-	if (!pdata && !pdata->pool_name)
+	if (!pdata || !pdata->pool_name)
 		return -ENODEV;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index 42bef6674ecf..dd30ea74785c 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/i2c.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 7a7de2b12a62..ce55fd8821c4 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -177,12 +177,22 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
 #endif
 #endif
 
+#ifdef CONFIG_MTD_NAND_PXA3xx
+static struct pxa3xx_nand_platform_data dkb_nand_info = {
+	.enable_arbiter = 1,
+	.num_cs = 1,
+};
+#endif
+
 static void __init ttc_dkb_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+#ifdef CONFIG_MTD_NAND_PXA3xx
+	pxa910_add_nand(&dkb_nand_info);
+#endif
 
 	/* off-chip devices */
 	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 1cd40ad301d3..7902de151cc5 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,8 +1,12 @@
 if ARCH_MSM
 
+comment "Qualcomm MSM SoC Type"
+	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
+	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
@@ -36,10 +40,10 @@ config ARCH_QSD8X50
 	select GPIO_MSM_V1
 	select MSM_PROC_COMM
 
+endchoice
+
 config ARCH_MSM8X60
 	bool "MSM8X60"
-	select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
-				  && !MACH_MSM8X60_FFA)
 	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
@@ -47,18 +51,17 @@ config ARCH_MSM8X60
 	select GPIO_MSM_V2
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
+	select USE_OF
 
 config ARCH_MSM8960
 	bool "MSM8960"
 	select ARCH_MSM_SCORPIONMP
-	select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
 	select ARM_GIC
 	select CPU_V7
 	select MSM_V2_TLMM
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
-
-endchoice
+	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
 	bool
@@ -112,42 +115,6 @@ config MACH_QSD8X50A_ST1_5
 	help
 	  Support for the Qualcomm ST1.5.
 
-config MACH_MSM8X60_RUMI3
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 RUMI3"
-	help
-	  Support for the Qualcomm MSM8x60 RUMI3 emulator.
-
-config MACH_MSM8X60_SURF
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 SURF"
-	help
-	  Support for the Qualcomm MSM8x60 SURF eval board.
-
-config MACH_MSM8X60_SIM
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 Simulator"
-	help
-	  Support for the Qualcomm MSM8x60 simulator.
-
-config MACH_MSM8X60_FFA
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 FFA"
-	help
-	  Support for the Qualcomm MSM8x60 FFA eval board.
-
-config MACH_MSM8960_SIM
-	depends on ARCH_MSM8960
-	bool "MSM8960 Simulator"
-	help
-	  Support for the Qualcomm MSM8960 simulator.
-
-config MACH_MSM8960_RUMI3
-	depends on ARCH_MSM8960
-	bool "MSM8960 RUMI3"
-	help
-	  Support for the Qualcomm MSM8960 RUMI3 emulator.
-
 endmenu
 
 config MSM_SMD_PKG3
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 4ad3969b9881..17519faf082f 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,11 +1,11 @@
-obj-y += io.o idle.o timer.o
+obj-y += io.o timer.o
 obj-y += clock.o
 obj-$(CONFIG_DEBUG_FS) += clock-debug.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
 obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
 
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o
 obj-$(CONFIG_ARCH_MSM7X30) += dma.o
 obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
 
@@ -25,8 +25,8 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
+obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
 
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
deleted file mode 100644
index 805d4ee53f7e..000000000000
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.c
- *
- * MSM architecture clock driver
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-#include "acpuclock.h"
-
-
-#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
-#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
-#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
-
-/*
- * ARM11 clock configuration for specific ACPU speeds
- */
-
-#define ACPU_PLL_TCXO	-1
-#define ACPU_PLL_0	0
-#define ACPU_PLL_1	1
-#define ACPU_PLL_2	2
-#define ACPU_PLL_3	3
-
-#define PERF_SWITCH_DEBUG 0
-#define PERF_SWITCH_STEP_DEBUG 0
-
-struct clock_state
-{
-	struct clkctl_acpu_speed	*current_speed;
-	struct mutex			lock;
-	uint32_t			acpu_switch_time_us;
-	uint32_t			max_speed_delta_khz;
-	uint32_t			vdd_switch_time_us;
-	unsigned long			power_collapse_khz;
-	unsigned long			wait_for_irq_khz;
-};
-
-static struct clk *ebi1_clk;
-static struct clock_state drv_state = { 0 };
-
-static void __init acpuclk_init(void);
-
-/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
-enum {
-	VDD_0 = 0,
-	VDD_1 = 1,
-	VDD_2 = 2,
-	VDD_3 = 3,
-	VDD_4 = 3,
-	VDD_5 = 3,
-	VDD_6 = 3,
-	VDD_7 = 7,
-	VDD_END
-};
-
-struct clkctl_acpu_speed {
-	unsigned int	a11clk_khz;
-	int		pll;
-	unsigned int	a11clk_src_sel;
-	unsigned int	a11clk_src_div;
-	unsigned int	ahbclk_khz;
-	unsigned int	ahbclk_div;
-	int		vdd;
-	unsigned int 	axiclk_khz;
-	unsigned long	lpj; /* loops_per_jiffy */
-/* Index in acpu_freq_tbl[] for steppings. */
-	short		down;
-	short		up;
-};
-
-/*
- * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initialize loops_per_jiffy to 0.
- *
- * Table stepping up/down is optimized for 256mhz jumps while staying on the
- * same PLL.
- */
-#if (0)
-static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
-	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
-	{ 61440, ACPU_PLL_0,  4, 3, 61440,  0, VDD_0, 30720,  0, 0, 8 },
-	{ 81920, ACPU_PLL_0,  4, 2, 40960,  1, VDD_0, 61440,  0, 0, 8 },
-	{ 96000, ACPU_PLL_1,  1, 7, 48000,  1, VDD_0, 61440,  0, 0, 9 },
-	{ 122880, ACPU_PLL_0, 4, 1, 61440,  1, VDD_3, 61440,  0, 0, 8 },
-	{ 128000, ACPU_PLL_1, 1, 5, 64000,  1, VDD_3, 61440,  0, 0, 12 },
-	{ 176000, ACPU_PLL_2, 2, 5, 88000,  1, VDD_3, 61440,  0, 0, 11 },
-	{ 192000, ACPU_PLL_1, 1, 3, 64000,  2, VDD_3, 61440,  0, 0, 12 },
-	{ 245760, ACPU_PLL_0, 4, 0, 81920,  2, VDD_4, 61440,  0, 0, 12 },
-	{ 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
-	{ 264000, ACPU_PLL_2, 2, 3, 88000,  2, VDD_5, 128000, 0, 6, 13 },
-	{ 352000, ACPU_PLL_2, 2, 2, 88000,  3, VDD_5, 128000, 0, 6, 13 },
-	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
-	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#else /* Table of freq we currently use. */
-static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
-	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
-	{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
-	{ 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
-	{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
-	{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
-	{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
-	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
-	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ_TABLE
-static struct cpufreq_frequency_table freq_table[] = {
-	{ 0, 122880 },
-	{ 1, 128000 },
-	{ 2, 245760 },
-	{ 3, 384000 },
-	{ 4, 528000 },
-	{ 5, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int pc_pll_request(unsigned id, unsigned on)
-{
-	int res;
-	on = !!on;
-
-#if PERF_SWITCH_DEBUG
-	if (on)
-		printk(KERN_DEBUG "Enabling PLL %d\n", id);
-	else
-		printk(KERN_DEBUG "Disabling PLL %d\n", id);
-#endif
-
-	res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
-	if (res < 0)
-		return res;
-
-#if PERF_SWITCH_DEBUG
-	if (on)
-		printk(KERN_DEBUG "PLL %d enabled\n", id);
-	else
-		printk(KERN_DEBUG "PLL %d disabled\n", id);
-#endif
-	return res;
-}
-
-
-/*----------------------------------------------------------------------------
- * ARM11 'owned' clock control
- *---------------------------------------------------------------------------*/
-
-unsigned long acpuclk_power_collapse(void) {
-	int ret = acpuclk_get_rate();
-	ret *= 1000;
-	if (ret > drv_state.power_collapse_khz)
-		acpuclk_set_rate(drv_state.power_collapse_khz, 1);
-	return ret;
-}
-
-unsigned long acpuclk_get_wfi_rate(void)
-{
-	return drv_state.wait_for_irq_khz;
-}
-
-unsigned long acpuclk_wait_for_irq(void) {
-	int ret = acpuclk_get_rate();
-	ret *= 1000;
-	if (ret > drv_state.wait_for_irq_khz)
-		acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
-	return ret;
-}
-
-static int acpuclk_set_vdd_level(int vdd)
-{
-	uint32_t current_vdd;
-
-	current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
-	       current_vdd, vdd);
-#endif
-	writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
-	udelay(drv_state.vdd_switch_time_us);
-	if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
-#if PERF_SWITCH_DEBUG
-		printk(KERN_ERR "acpuclock: VDD set failed\n");
-#endif
-		return -EIO;
-	}
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "acpuclock: VDD switched\n");
-#endif
-	return 0;
-}
-
-/* Set proper dividers for the given clock speed. */
-static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
-	uint32_t reg_clkctl, reg_clksel, clk_div;
-
-	/* AHB_CLK_DIV */
-	clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
-	/*
-	 * If the new clock divider is higher than the previous, then
-	 * program the divider before switching the clock
-	 */
-	if (hunt_s->ahbclk_div > clk_div) {
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~(0x3 << 1);
-		reg_clksel |= (hunt_s->ahbclk_div << 1);
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-	if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
-		/* SRC0 */
-
-		/* Program clock source */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0x07 << 4);
-		reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock divider */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~0xf;
-		reg_clkctl |= hunt_s->a11clk_src_div;
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock source selection */
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel |= 1; /* CLK_SEL_SRC1NO  == SRC1 */
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	} else {
-		/* SRC1 */
-
-		/* Program clock source */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0x07 << 12);
-		reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock divider */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0xf << 8);
-		reg_clkctl |= (hunt_s->a11clk_src_div << 8);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock source selection */
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~1; /* CLK_SEL_SRC1NO  == SRC0 */
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-
-	/*
-	 * If the new clock divider is lower than the previous, then
-	 * program the divider after switching the clock
-	 */
-	if (hunt_s->ahbclk_div < clk_div) {
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~(0x3 << 1);
-		reg_clksel |= (hunt_s->ahbclk_div << 1);
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-}
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
-{
-	uint32_t reg_clkctl;
-	struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
-	int rc = 0;
-	unsigned int plls_enabled = 0, pll;
-
-	strt_s = cur_s = drv_state.current_speed;
-
-	WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
-	if (cur_s == NULL)
-		return -ENOENT;
-
-	if (rate == (cur_s->a11clk_khz * 1000))
-		return 0;
-
-	for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
-		if (tgt_s->a11clk_khz == (rate / 1000))
-			break;
-	}
-
-	if (tgt_s->a11clk_khz == 0)
-		return -EINVAL;
-
-	/* Choose the highest speed speed at or below 'rate' with same PLL. */
-	if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
-		while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
-			tgt_s--;
-	}
-
-	if (strt_s->pll != ACPU_PLL_TCXO)
-		plls_enabled |= 1 << strt_s->pll;
-
-	if (!for_power_collapse) {
-		mutex_lock(&drv_state.lock);
-		if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
-			rc = pc_pll_request(tgt_s->pll, 1);
-			if (rc < 0) {
-				pr_err("PLL%d enable failed (%d)\n",
-					tgt_s->pll, rc);
-				goto out;
-			}
-			plls_enabled |= 1 << tgt_s->pll;
-		}
-		/* Increase VDD if needed. */
-		if (tgt_s->vdd > cur_s->vdd) {
-			if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
-				printk(KERN_ERR "Unable to switch ACPU vdd\n");
-				goto out;
-			}
-		}
-	}
-
-	/* Set wait states for CPU between frequency changes */
-	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
-	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
-	       strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
-#endif
-
-	while (cur_s != tgt_s) {
-		/*
-		 * Always jump to target freq if within 256mhz, regulardless of
-		 * PLL. If differnece is greater, use the predefinied
-		 * steppings in the table.
-		 */
-		int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
-		if (d > drv_state.max_speed_delta_khz) {
-			/* Step up or down depending on target vs current. */
-			int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
-				cur_s->up : cur_s->down;
-			if (clk_index < 0) { /* This should not happen. */
-				printk(KERN_ERR "cur:%u target: %u\n",
-					cur_s->a11clk_khz, tgt_s->a11clk_khz);
-				rc = -EINVAL;
-				goto out;
-			}
-			cur_s = &acpu_freq_tbl[clk_index];
-		} else {
-			cur_s = tgt_s;
-		}
-#if PERF_SWITCH_STEP_DEBUG
-		printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
-			__FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
-#endif
-		if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
-		    && !(plls_enabled & (1 << cur_s->pll))) {
-			rc = pc_pll_request(cur_s->pll, 1);
-			if (rc < 0) {
-				pr_err("PLL%d enable failed (%d)\n",
-					cur_s->pll, rc);
-				goto out;
-			}
-			plls_enabled |= 1 << cur_s->pll;
-		}
-
-		acpuclk_set_div(cur_s);
-		drv_state.current_speed = cur_s;
-		/* Re-adjust lpj for the new clock speed. */
-		loops_per_jiffy = cur_s->lpj;
-		udelay(drv_state.acpu_switch_time_us);
-	}
-
-	/* Nothing else to do for power collapse. */
-	if (for_power_collapse)
-		return 0;
-
-	/* Disable PLLs we are not using anymore. */
-	plls_enabled &= ~(1 << tgt_s->pll);
-	for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
-		if (plls_enabled & (1 << pll)) {
-			rc = pc_pll_request(pll, 0);
-			if (rc < 0) {
-				pr_err("PLL%d disable failed (%d)\n", pll, rc);
-				goto out;
-			}
-		}
-
-	/* Change the AXI bus frequency if we can. */
-	if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
-		rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
-		if (rc < 0)
-			pr_err("Setting AXI min rate failed!\n");
-	}
-
-	/* Drop VDD level if we can. */
-	if (tgt_s->vdd < strt_s->vdd) {
-		if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
-			printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
-	}
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
-#endif
-out:
-	if (!for_power_collapse)
-		mutex_unlock(&drv_state.lock);
-	return rc;
-}
-
-static void __init acpuclk_init(void)
-{
-	struct clkctl_acpu_speed *speed;
-	uint32_t div, sel;
-	int rc;
-
-	/*
-	 * Determine the rate of ACPU clock
-	 */
-
-	if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
-		/* CLK_SRC0_SEL */
-		sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
-		/* CLK_SRC0_DIV */
-		div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
-	} else {
-		/* CLK_SRC1_SEL */
-		sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
-		/* CLK_SRC1_DIV */
-		div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
-	}
-
-	for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
-		if (speed->a11clk_src_sel == sel
-		 && (speed->a11clk_src_div == div))
-			break;
-	}
-	if (speed->a11clk_khz == 0) {
-		printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
-		return;
-	}
-
-	drv_state.current_speed = speed;
-
-	rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
-	if (rc < 0)
-		pr_err("Setting AXI min rate failed!\n");
-
-	printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
-}
-
-unsigned long acpuclk_get_rate(void)
-{
-	WARN_ONCE(drv_state.current_speed == NULL,
-		  "acpuclk_get_rate: not initialized\n");
-	if (drv_state.current_speed)
-		return drv_state.current_speed->a11clk_khz;
-	else
-		return 0;
-}
-
-uint32_t acpuclk_get_switch_time(void)
-{
-	return drv_state.acpu_switch_time_us;
-}
-
-/*----------------------------------------------------------------------------
- * Clock driver initialization
- *---------------------------------------------------------------------------*/
-
-/* Initialize the lpj field in the acpu_freq_tbl. */
-static void __init lpj_init(void)
-{
-	int i;
-	const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
-	for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
-		acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
-						base_clk->a11clk_khz,
-						acpu_freq_tbl[i].a11clk_khz);
-	}
-}
-
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
-{
-	pr_info("acpu_clock_init()\n");
-
-	ebi1_clk = clk_get(NULL, "ebi1_clk");
-
-	mutex_init(&drv_state.lock);
-	drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
-	drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
-	drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
-	drv_state.power_collapse_khz = clkdata->power_collapse_khz;
-	drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
-	acpuclk_init();
-	lpj_init();
-#ifdef CONFIG_CPU_FREQ_TABLE
-	cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
-#endif
-}
diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h
deleted file mode 100644
index 415de2eb9a5e..000000000000
--- a/arch/arm/mach-msm/acpuclock.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.h
- *
- * MSM architecture clock driver header
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
-unsigned long acpuclk_get_rate(void);
-uint32_t acpuclk_get_switch_time(void);
-unsigned long acpuclk_wait_for_irq(void);
-unsigned long acpuclk_power_collapse(void);
-unsigned long acpuclk_get_wfi_rate(void);
-
-
-#endif
-
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
new file mode 100644
index 000000000000..b5b4de2cdf9e
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+
+static void __init msm8x60_init_irq(void)
+{
+	of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm8x60_init_late(void)
+{
+	smd_debugfs_init();
+}
+
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+	{}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+	"qcom,msm8660-fluid",
+	"qcom,msm8660-surf",
+	NULL
+};
+
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+	.smp = smp_ops(msm_smp_ops),
+	.map_io = msm_map_msm8x60_io,
+	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
+	.init_machine = msm8x60_dt_init,
+	.init_late = msm8x60_init_late,
+	.timer = &msm_dt_timer,
+	.dt_compat = msm8x60_fluid_match,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
new file mode 100644
index 000000000000..4490edb71c17
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -0,0 +1,50 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+	{ .compatible = "qcom,msm-qgic2", .data = gic_of_init },
+	{ }
+};
+
+static void __init msm_dt_init_irq(void)
+{
+	of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const msm8960_dt_match[] __initconst = {
+	"qcom,msm8960-cdp",
+	NULL
+};
+
+DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+	.smp = smp_ops(msm_smp_ops),
+	.map_io = msm_map_msm8960_io,
+	.init_irq = msm_dt_init_irq,
+	.timer = &msm_dt_timer,
+	.init_machine = msm_dt_init,
+	.dt_compat = msm8960_dt_match,
+	.handle_irq = gic_handle_irq,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 4fa3e99d9a62..6ce542e2e21c 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -36,6 +36,7 @@
 #include <linux/mtd/partitions.h>
 
 #include "devices.h"
+#include "common.h"
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -66,8 +67,6 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
-extern struct sys_timer msm_timer;
-
 static void __init halibut_init_early(void)
 {
 	arch_ioremap_caller = __msm_ioremap_caller;
@@ -107,5 +106,5 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
 	.init_late	= halibut_init_late,
-	.timer		= &msm_timer,
+	.timer		= &msm7x01_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index cf1f89a5dc62..df00bc03ce74 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -30,7 +30,6 @@
 
 #include <mach/board.h>
 #include <mach/hardware.h>
-#include <mach/system.h>
 
 #include "board-mahimahi.h"
 #include "devices.h"
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
deleted file mode 100644
index 451ab1d43c92..000000000000
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/power_supply.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-#ifdef CONFIG_CACHE_L2X0
-#include <asm/hardware/cache-l2x0.h>
-#endif
-
-#include <mach/vreg.h>
-#include <mach/mpp.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "socinfo.h"
-#include "clock.h"
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x9C004300,
-		.end	= 0x9C0043ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSM_GPIO_TO_INT(132),
-		.end	= MSM_GPIO_TO_INT(132),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_dmov,
-	&msm_device_nand,
-	&smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x2x_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init msm7x2x_init(void)
-{
-	if (socinfo_init() < 0)
-		BUG();
-
-	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
-		smc91x_resources[0].start = 0x98000300;
-		smc91x_resources[0].end = 0x980003ff;
-		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
-		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
-		if (gpio_tlmm_config(GPIO_CFG(85, 0,
-					      GPIO_INPUT,
-					      GPIO_PULL_DOWN,
-					      GPIO_2MA),
-				     GPIO_ENABLE)) {
-			printk(KERN_ERR
-			       "%s: Err: Config GPIO-85 INT\n",
-				__func__);
-		}
-	}
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x2x_map_io(void)
-{
-	msm_map_common_io();
-	/* Technically dependent on the SoC but using machine_is
-	 * macros since socinfo is not available this early and there
-	 * are plans to restructure the code which will eliminate the
-	 * need for socinfo.
-	 */
-	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
-		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
-
-	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
-		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
-
-#ifdef CONFIG_CACHE_L2X0
-	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
-		/* 7x27 has 256KB L2 cache:
-			64Kb/Way and 4-Way Associativity;
-			R/W latency: 3 cycles;
-			evmon/parity/share disabled. */
-		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
-	}
-#endif
-}
-
-static void __init msm7x2x_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.init_late	= msm7x2x_init_late,
-	.timer		= &msm_timer,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index a5001378135d..effa6f4336c7 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -38,8 +38,7 @@
 #include "devices.h"
 #include "gpiomux.h"
 #include "proc_comm.h"
-
-extern struct sys_timer msm_timer;
+#include "common.h"
 
 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
 		struct meminfo *mi)
@@ -132,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm_timer,
+	.timer = &msm7x30_timer,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -143,7 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm_timer,
+	.timer = &msm7x30_timer,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -154,5 +153,5 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
 	.init_late = msm7x30_init_late,
-	.timer = &msm_timer,
+	.timer = &msm7x30_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
deleted file mode 100644
index 65f4a1daa2e5..000000000000
--- a/arch/arm/mach-msm/board-msm8960.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-
-static void __init msm8960_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM &&
-				tag->u.mem.start == 0x40200000) {
-			tag->u.mem.start = 0x40000000;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm8960_reserve(void)
-{
-	memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8960_map_io(void)
-{
-	msm_map_msm8960_io();
-}
-
-static void __init msm8960_init_irq(void)
-{
-	unsigned int i;
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
-
-	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	if (machine_is_msm8960_rumi3())
-		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
-	/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
-	 * as they are configured as level, which does not play nice with
-	 * handle_percpu_irq.
-	 */
-	for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
-		if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
-			irq_set_handler(i, handle_percpu_irq);
-	}
-}
-
-static struct platform_device *sim_devices[] __initdata = {
-	&msm8960_device_uart_gsbi2,
-};
-
-static struct platform_device *rumi3_devices[] __initdata = {
-	&msm8960_device_uart_gsbi5,
-};
-
-static void __init msm8960_sim_init(void)
-{
-	platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
-}
-
-static void __init msm8960_rumi3_init(void)
-{
-	platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
-}
-
-static void __init msm8960_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
-	.fixup = msm8960_fixup,
-	.reserve = msm8960_reserve,
-	.map_io = msm8960_map_io,
-	.init_irq = msm8960_init_irq,
-	.timer = &msm_timer,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8960_sim_init,
-	.init_late = msm8960_init_late,
-MACHINE_END
-
-MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
-	.fixup = msm8960_fixup,
-	.reserve = msm8960_reserve,
-	.map_io = msm8960_map_io,
-	.init_irq = msm8960_init_irq,
-	.timer = &msm_timer,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8960_rumi3_init,
-	.init_late = msm8960_init_late,
-MACHINE_END
-
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
deleted file mode 100644
index e37a724cd1eb..000000000000
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM &&
-				tag->u.mem.start == 0x40200000) {
-			tag->u.mem.start = 0x40000000;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm8x60_reserve(void)
-{
-	memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8x60_map_io(void)
-{
-	msm_map_msm8x60_io();
-}
-
-#ifdef CONFIG_OF
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
-	{}
-};
-#endif
-
-static void __init msm8x60_init_irq(void)
-{
-	if (!of_have_populated_dt())
-		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-			 (void *)MSM_QGIC_CPU_BASE);
-#ifdef CONFIG_OF
-	else
-		of_irq_init(msm_dt_gic_match);
-#endif
-
-	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	/* RUMI does not adhere to GIC spec by enabling STIs by default.
-	 * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
-	 */
-	if (!machine_is_msm8x60_sim())
-		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-}
-
-static void __init msm8x60_init(void)
-{
-}
-
-static void __init msm8x60_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-#ifdef CONFIG_OF
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-	{}
-};
-
-static void __init msm8x60_dt_init(void)
-{
-	if (of_machine_is_compatible("qcom,msm8660-surf")) {
-		printk(KERN_INFO "Init surf UART registers\n");
-		msm8x60_init_uart12dm();
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
-	"qcom,msm8660-fluid",
-	"qcom,msm8660-surf",
-	NULL
-};
-#endif /* CONFIG_OF */
-
-MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-MACHINE_END
-
-#ifdef CONFIG_OF
-/* TODO: General device tree support for all MSM. */
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.init_machine = msm8x60_dt_init,
-	.init_late = msm8x60_init_late,
-	.timer = &msm_timer,
-	.dt_compat = msm8x60_fluid_match,
-MACHINE_END
-#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index c8fe0edb9761..2448fcf09eb1 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -32,14 +32,13 @@
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
+#include "common.h"
 
-extern struct sys_timer msm_timer;
-
-static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
-static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
+static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
+static const unsigned        qsd8x50_surf_smc91x_gpio __initconst = 156;
 
 /* Leave smc91x resources empty here, as we'll fill them in
  * at run-time: they vary from board to board, and the true
@@ -201,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
 	.init_late = qsd8x50_init_late,
-	.timer = &msm_timer,
+	.timer = &qsd8x50_timer,
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -210,5 +209,5 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
 	.init_late = qsd8x50_init_late,
-	.timer = &msm_timer,
+	.timer = &qsd8x50_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 2e569ab10eef..b7b0fc7e3278 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -27,7 +27,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
-#include <mach/system.h>
 #include <mach/vreg.h>
 #include <mach/board.h>
 
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
index 8650342b7493..3723e55819d6 100644
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -15,7 +15,7 @@
 
 #include <mach/vreg.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 89bf6b426699..f9a5db6d2ced 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -14,7 +14,7 @@
 #include <asm/mach-types.h>
 #include <asm/system_info.h>
 
-#include <mach/msm_fb.h>
+#include <linux/platform_data/video-msm_fb.h>
 #include <mach/vreg.h>
 
 #include "board-trout.h"
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index bbe13f12fa01..4ba0800e243e 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -31,6 +31,7 @@
 
 #include "devices.h"
 #include "board-trout.h"
+#include "common.h"
 
 extern int trout_init_mmc(unsigned int);
 
@@ -42,8 +43,6 @@ static struct platform_device *devices[] __initdata = {
 	&msm_device_i2c,
 };
 
-extern struct sys_timer msm_timer;
-
 static void __init trout_init_early(void)
 {
 	arch_ioremap_caller = __msm_ioremap_caller;
@@ -111,5 +110,5 @@ MACHINE_START(TROUT, "HTC Dream")
 	.init_irq	= trout_init_irq,
 	.init_machine	= trout_init,
 	.init_late	= trout_init_late,
-	.timer		= &msm_timer,
+	.timer		= &msm7x01_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c
index 63b711311086..a52c970df157 100644
--- a/arch/arm/mach-msm/clock-pcom.c
+++ b/arch/arm/mach-msm/clock-pcom.c
@@ -25,7 +25,7 @@
 /*
  * glue for the proc_comm interface
  */
-int pc_clk_enable(unsigned id)
+static int pc_clk_enable(unsigned id)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
 	if (rc < 0)
@@ -34,7 +34,7 @@ int pc_clk_enable(unsigned id)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-void pc_clk_disable(unsigned id)
+static void pc_clk_disable(unsigned id)
 {
 	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
 }
@@ -54,7 +54,7 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_rate(unsigned id, unsigned rate)
+static int pc_clk_set_rate(unsigned id, unsigned rate)
 {
 	/* The rate _might_ be rounded off to the nearest KHz value by the
 	 * remote function. So a return value of 0 doesn't necessarily mean
@@ -67,7 +67,7 @@ int pc_clk_set_rate(unsigned id, unsigned rate)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_min_rate(unsigned id, unsigned rate)
+static int pc_clk_set_min_rate(unsigned id, unsigned rate)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
 	if (rc < 0)
@@ -76,7 +76,7 @@ int pc_clk_set_min_rate(unsigned id, unsigned rate)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_max_rate(unsigned id, unsigned rate)
+static int pc_clk_set_max_rate(unsigned id, unsigned rate)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
 	if (rc < 0)
@@ -85,7 +85,7 @@ int pc_clk_set_max_rate(unsigned id, unsigned rate)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-int pc_clk_set_flags(unsigned id, unsigned flags)
+static int pc_clk_set_flags(unsigned id, unsigned flags)
 {
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
 	if (rc < 0)
@@ -94,7 +94,7 @@ int pc_clk_set_flags(unsigned id, unsigned flags)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-unsigned pc_clk_get_rate(unsigned id)
+static unsigned pc_clk_get_rate(unsigned id)
 {
 	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
 		return 0;
@@ -102,7 +102,7 @@ unsigned pc_clk_get_rate(unsigned id)
 		return id;
 }
 
-unsigned pc_clk_is_enabled(unsigned id)
+static unsigned pc_clk_is_enabled(unsigned id)
 {
 	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
 		return 0;
@@ -110,7 +110,7 @@ unsigned pc_clk_is_enabled(unsigned id)
 		return id;
 }
 
-long pc_clk_round_rate(unsigned id, unsigned rate)
+static long pc_clk_round_rate(unsigned id, unsigned rate)
 {
 
 	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
new file mode 100644
index 000000000000..633a7159d5ff
--- /dev/null
+++ b/arch/arm/mach-msm/common.h
@@ -0,0 +1,32 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_COMMON_H
+#define __MACH_COMMON_H
+
+extern struct sys_timer msm7x01_timer;
+extern struct sys_timer msm7x30_timer;
+extern struct sys_timer msm_dt_timer;
+extern struct sys_timer qsd8x50_timer;
+
+extern void msm_map_common_io(void);
+extern void msm_map_msm7x30_io(void);
+extern void msm_map_msm8x60_io(void);
+extern void msm_map_msm8960_io(void);
+extern void msm_map_qsd8x50_io(void);
+
+extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+					  unsigned int mtype, void *caller);
+
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
+
+#endif
diff --git a/arch/arm/mach-msm/core.h b/arch/arm/mach-msm/core.h
new file mode 100644
index 000000000000..a9bab53dddf4
--- /dev/null
+++ b/arch/arm/mach-msm/core.h
@@ -0,0 +1,2 @@
+extern struct smp_operations msm_smp_ops;
+extern void msm_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index 993780f490ad..f66ee6ea8720 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -27,7 +27,7 @@
 
 #include "clock.h"
 #include "clock-pcom.h"
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 static struct resource resources_uart1[] = {
 	{
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index 09b4f1403824..e90ab5938c5f 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -31,7 +31,7 @@
 #include "clock-pcom.h"
 #include "clock-7x30.h"
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 static struct resource resources_uart2[] = {
 	{
diff --git a/arch/arm/mach-msm/devices-msm8960.c b/arch/arm/mach-msm/devices-msm8960.c
deleted file mode 100644
index d9e1f26475de..000000000000
--- a/arch/arm/mach-msm/devices-msm8960.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <mach/irqs-8960.h>
-#include <mach/board.h>
-
-#include "devices.h"
-
-#define MSM_GSBI2_PHYS		0x16100000
-#define MSM_UART2DM_PHYS	(MSM_GSBI2_PHYS + 0x40000)
-
-#define MSM_GSBI5_PHYS		0x16400000
-#define MSM_UART5DM_PHYS	(MSM_GSBI5_PHYS + 0x40000)
-
-static struct resource resources_uart_gsbi2[] = {
-	{
-		.start	= GSBI2_UARTDM_IRQ,
-		.end	= GSBI2_UARTDM_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2DM_PHYS,
-		.end	= MSM_UART2DM_PHYS + PAGE_SIZE - 1,
-		.name	= "uart_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MSM_GSBI2_PHYS,
-		.end	= MSM_GSBI2_PHYS + PAGE_SIZE - 1,
-		.name	= "gsbi_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm8960_device_uart_gsbi2 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart_gsbi2),
-	.resource	= resources_uart_gsbi2,
-};
-
-static struct resource resources_uart_gsbi5[] = {
-	{
-		.start	= GSBI5_UARTDM_IRQ,
-		.end	= GSBI5_UARTDM_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART5DM_PHYS,
-		.end	= MSM_UART5DM_PHYS + PAGE_SIZE - 1,
-		.name	= "uart_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MSM_GSBI5_PHYS,
-		.end	= MSM_GSBI5_PHYS + PAGE_SIZE - 1,
-		.name	= "gsbi_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm8960_device_uart_gsbi5 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart_gsbi5),
-	.resource	= resources_uart_gsbi5,
-};
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 131633b12a34..4db61d5fe317 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -27,7 +27,7 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 #include "clock-pcom.h"
 
 static struct resource resources_uart3[] = {
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 02cae5e2951c..354b91d4c3ac 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -223,8 +223,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 			PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
 			if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
 				cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
-				list_del(&cmd->list);
-				list_add_tail(&cmd->list, &active_commands[id]);
+				list_move_tail(&cmd->list, &active_commands[id]);
 				if (cmd->execute_func)
 					cmd->execute_func(cmd);
 				PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index a446fc14221f..750446feb444 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -13,7 +13,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
-extern volatile int pen_release;
+#include "common.h"
 
 static inline void cpu_enter_lowpower(void)
 {
@@ -57,17 +57,12 @@ static inline void platform_do_lowpower(unsigned int cpu)
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref msm_cpu_die(unsigned int cpu)
 {
 	/*
 	 * we're ready for shutdown now, so do it
@@ -81,12 +76,3 @@ void platform_cpu_die(unsigned int cpu)
 	 */
 	cpu_leave_lowpower();
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
deleted file mode 100644
index 0c9e13c65743..000000000000
--- a/arch/arm/mach-msm/idle.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* arch/arm/mach-msm/idle.c
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <asm/system.h>
-
-static void msm_idle(void)
-{
-#ifdef CONFIG_MSM7X00A_IDLE
-	asm volatile (
-
-	"mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
-	"bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
-	"bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
-	"mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
-
-	"mov     r0, #0                   /* prepare wfi value  */ \n\t"
-	"mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
-	"mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
-	"mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
-
-	"mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
-
-	: : : "r0","r1" );
-#endif
-}
-
-static int __init msm_idle_init(void)
-{
-	arm_pm_idle = msm_idle;
-	return 0;
-}
-
-arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 435f8edfafd1..8cebedb11233 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -18,31 +18,18 @@
 #define __ASM_ARCH_MSM_BOARD_H
 
 #include <linux/types.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-msm_sdcc.h>
 
 /* platform device data structures */
 
-struct msm_acpu_clock_platform_data
-{
-	uint32_t acpu_switch_time_us;
-	uint32_t max_speed_delta_khz;
-	uint32_t vdd_switch_time_us;
-	unsigned long power_collapse_khz;
-	unsigned long wait_for_irq_khz;
-};
-
 struct clk_lookup;
 
-extern struct sys_timer msm_timer;
-
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
 void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
 int __init msm_add_sdcc(unsigned int controller,
 			struct msm_mmc_platform_data *plat,
 			unsigned int stat_irq, unsigned long stat_irq_flags);
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
deleted file mode 100644
index ffcd9e3a6a7e..000000000000
--- a/arch/arm/mach-msm/include/mach/mmc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct msm_mmc_gpio {
-	unsigned no;
-	const char *name;
-};
-
-struct msm_mmc_gpio_data {
-	struct msm_mmc_gpio *gpio;
-	u8 size;
-};
-
-struct msm_mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
-	struct msm_mmc_gpio_data *gpio_data;
-	void (*init_card)(struct mmc_card *card);
-};
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_fb.h b/arch/arm/mach-msm/include/mach/msm_fb.h
deleted file mode 100644
index 1f4fc81b3d8f..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_fb.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_fb.h
- *
- * Internal shared definitions for various MSM framebuffer parts.
- *
- * Copyright (C) 2007 Google Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MSM_FB_H_
-#define _MSM_FB_H_
-
-#include <linux/device.h>
-
-struct mddi_info;
-
-struct msm_fb_data {
-	int xres;	/* x resolution in pixels */
-	int yres;	/* y resolution in pixels */
-	int width;	/* disply width in mm */
-	int height;	/* display height in mm */
-	unsigned output_format;
-};
-
-struct msmfb_callback {
-	void (*func)(struct msmfb_callback *);
-};
-
-enum {
-	MSM_MDDI_PMDH_INTERFACE,
-	MSM_MDDI_EMDH_INTERFACE,
-	MSM_EBI2_INTERFACE,
-};
-
-#define MSMFB_CAP_PARTIAL_UPDATES	(1 << 0)
-
-struct msm_panel_data {
-	/* turns off the fb memory */
-	int (*suspend)(struct msm_panel_data *);
-	/* turns on the fb memory */
-	int (*resume)(struct msm_panel_data *);
-	/* turns off the panel */
-	int (*blank)(struct msm_panel_data *);
-	/* turns on the panel */
-	int (*unblank)(struct msm_panel_data *);
-	void (*wait_vsync)(struct msm_panel_data *);
-	void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
-	void (*clear_vsync)(struct msm_panel_data *);
-	/* from the enum above */
-	unsigned interface_type;
-	/* data to be passed to the fb driver */
-	struct msm_fb_data *fb_data;
-
-	/* capabilities supported by the panel */
-	uint32_t caps;
-};
-
-struct msm_mddi_client_data {
-	void (*suspend)(struct msm_mddi_client_data *);
-	void (*resume)(struct msm_mddi_client_data *);
-	void (*activate_link)(struct msm_mddi_client_data *);
-	void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
-			     uint32_t reg);
-	uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
-	void (*auto_hibernate)(struct msm_mddi_client_data *, int);
-	/* custom data that needs to be passed from the board file to a 
-	 * particular client */
-	void *private_client_data;
-	struct resource *fb_resource;
-	/* from the list above */
-	unsigned interface_type;
-};
-
-struct msm_mddi_platform_data {
-	unsigned int clk_rate;
-	void (*power_client)(struct msm_mddi_client_data *, int on);
-
-	/* fixup the mfr name, product id */
-	void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
-
-	struct resource *fb_resource; /*optional*/
-	/* number of clients in the list that follows */
-	int num_clients;
-	/* array of client information of clients */
-	struct {
-		unsigned product_id; /* mfr id in top 16 bits, product id
-				      * in lower 16 bits
-				      */
-		char *name;	/* the device name will be the platform
-				 * device name registered for the client,
-				 * it should match the name of the associated
-				 * driver
-				 */
-		unsigned id;	/* id for mddi client device node, will also
-				 * be used as device id of panel devices, if
-				 * the client device will have multiple panels
-				 * space must be left here for them
-				 */
-		void *client_data;	/* required private client data */
-		unsigned int clk_rate;	/* optional: if the client requires a
-					* different mddi clk rate
-					*/
-	} client_platform_data[];
-};
-
-struct mdp_blit_req;
-struct fb_info;
-struct mdp_device {
-	struct device dev;
-	void (*dma)(struct mdp_device *mpd, uint32_t addr,
-		    uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
-		    uint32_t y, struct msmfb_callback *callback, int interface);
-	void (*dma_wait)(struct mdp_device *mdp);
-	int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
-		    struct mdp_blit_req *req);
-	void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
-};
-
-struct class_interface;
-int register_mdp_client(struct class_interface *class_intf);
-
-/**** private client data structs go below this line ***/
-
-struct msm_mddi_bridge_platform_data {
-	/* from board file */
-	int (*init)(struct msm_mddi_bridge_platform_data *,
-		    struct msm_mddi_client_data *);
-	int (*uninit)(struct msm_mddi_bridge_platform_data *,
-		      struct msm_mddi_client_data *);
-	/* passed to panel for use by the fb driver */
-	int (*blank)(struct msm_mddi_bridge_platform_data *,
-		     struct msm_mddi_client_data *);
-	int (*unblank)(struct msm_mddi_bridge_platform_data *,
-		       struct msm_mddi_client_data *);
-	struct msm_fb_data fb_data;
-};
-
-
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
index 6c4046c21296..67dc0e98b958 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -105,11 +105,4 @@
 #define MSM_AD5_PHYS          0xAC000000
 #define MSM_AD5_SIZE          (SZ_1M*13)
 
-#ifndef __ASSEMBLY__
-
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
-					  unsigned int mtype, void *caller);
-
-#endif
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index f944fe65a657..198202c267c8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -100,8 +100,4 @@
 #define MSM_HSUSB_PHYS        0xA3600000
 #define MSM_HSUSB_SIZE        SZ_1K
 
-#ifndef __ASSEMBLY__
-extern void msm_map_msm7x30_io(void);
-#endif
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
index a1752c0284fc..9819a556acae 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
@@ -46,12 +46,8 @@
 #define MSM8960_TMR0_SIZE	SZ_4K
 
 #ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_BASE	0xF0040000
 #define MSM_DEBUG_UART_PHYS	0x16440000
 #endif
 
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8960_io(void);
-#endif
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index da77cc1d545d..0faa894729b7 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -122,8 +122,4 @@
 #define MSM_SDC4_PHYS          0xA0600000
 #define MSM_SDC4_SIZE          SZ_4K
 
-#ifndef __ASSEMBLY__
-extern void msm_map_qsd8x50_io(void);
-#endif
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 5aed57dc808c..199372e62def 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -41,21 +41,10 @@
 #define MSM8X60_QGIC_CPU_PHYS	0x02081000
 #define MSM8X60_QGIC_CPU_SIZE	SZ_4K
 
-#define MSM_ACC_BASE		IOMEM(0xF0002000)
-#define MSM_ACC_PHYS		0x02001000
-#define MSM_ACC_SIZE		SZ_4K
-
-#define MSM_GCC_BASE		IOMEM(0xF0003000)
-#define MSM_GCC_PHYS		0x02082000
-#define MSM_GCC_SIZE		SZ_4K
-
 #define MSM_TLMM_BASE		IOMEM(0xF0004000)
 #define MSM_TLMM_PHYS		0x00800000
 #define MSM_TLMM_SIZE		SZ_16K
 
-#define MSM_SHARED_RAM_BASE	IOMEM(0xF0100000)
-#define MSM_SHARED_RAM_SIZE	SZ_1M
-
 #define MSM8X60_TMR_PHYS	0x02000000
 #define MSM8X60_TMR_SIZE	SZ_4K
 
@@ -63,12 +52,8 @@
 #define MSM8X60_TMR0_SIZE	SZ_4K
 
 #ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_BASE	0xF0040000
 #define MSM_DEBUG_UART_PHYS	0x19C40000
 #endif
 
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8x60_io(void);
-#endif
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 00afdfb8c38f..2ab7cf0919b3 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -41,12 +41,11 @@
 #include "msm_iomap-7x30.h"
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "msm_iomap-8x50.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "msm_iomap-8x60.h"
 #else
 #include "msm_iomap-7x00.h"
 #endif
 
+#include "msm_iomap-8x60.h"
 #include "msm_iomap-8960.h"
 
 #define MSM_DEBUG_UART_SIZE	SZ_4K
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
deleted file mode 100644
index f5fb2ec87ffe..000000000000
--- a/arch/arm/mach-msm/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-msm/include/mach/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-/* low level hardware reset hook -- for example, hitting the
- * PSHOLD line on the PMIC to hard reset the system
- */
-extern void (*msm_hw_reset_hook)(void);
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index a1e7b1168850..123ef9cbce1b 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -29,30 +29,32 @@
 
 #include <mach/board.h>
 
-#define MSM_CHIP_DEVICE(name, chip) {			      \
+#include "common.h"
+
+#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) {			      \
 		.virtual = (unsigned long) MSM_##name##_BASE, \
 		.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
 		.length = chip##_##name##_SIZE, \
-		.type = MT_DEVICE_NONSHARED, \
+		.type = mem_type, \
 	 }
 
+#define MSM_DEVICE_TYPE(name, mem_type) \
+		MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
+#define MSM_CHIP_DEVICE(name, chip) \
+		MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
 #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
 
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
-	|| defined(CONFIG_ARCH_MSM7X25)
+#if defined(CONFIG_ARCH_MSM7X00A)
 static struct map_desc msm_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, MSM7X00),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, MSM7X00),
-	MSM_CHIP_DEVICE(GPIO2, MSM7X00),
-	MSM_DEVICE(CLK_CTL),
+	MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
+	MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
+	MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
+	MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
+	MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
+	MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
 #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
 	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
-#ifdef CONFIG_ARCH_MSM7X30
-	MSM_DEVICE(GCC),
+	MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
 #endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
@@ -109,8 +111,6 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60),
 	MSM_CHIP_DEVICE(TMR, MSM8X60),
 	MSM_CHIP_DEVICE(TMR0, MSM8X60),
-	MSM_DEVICE(ACC),
-	MSM_DEVICE(GCC),
 #ifdef CONFIG_DEBUG_MSM8660_UART
 	MSM_DEVICE(DEBUG_UART),
 #endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index e012dc8391cf..7ed69b69c87c 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -22,23 +22,14 @@
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
 
-#include <mach/msm_iomap.h>
-
 #include "scm-boot.h"
+#include "common.h"
 
 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
 #define SCSS_CPU1CORE_RESET 0xD80
 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
 
-/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
-
 extern void msm_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen".
- */
-volatile int pen_release = -1;
 
 static DEFINE_SPINLOCK(boot_lock);
 
@@ -48,11 +39,8 @@ static inline int get_core_count(void)
 	return ((read_cpuid_id() >> 4) & 3) + 1;
 }
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit msm_secondary_init(unsigned int cpu)
 {
-	/* Configure edge-triggered PPIs */
-	writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
@@ -93,7 +81,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
 				  "address\n");
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	static int cold_boot_done;
@@ -153,7 +141,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  * does not support the ARM SCU, so just set the possible cpu mask to
  * NR_CPUS.
  */
-void __init smp_init_cpus(void)
+static void __init msm_smp_init_cpus(void)
 {
 	unsigned int i, ncores = get_core_count();
 
@@ -169,6 +157,16 @@ void __init smp_init_cpus(void)
         set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
 {
 }
+
+struct smp_operations msm_smp_ops __initdata = {
+	.smp_init_cpus		= msm_smp_init_cpus,
+	.smp_prepare_cpus	= msm_smp_prepare_cpus,
+	.smp_secondary_init	= msm_secondary_init,
+	.smp_boot_secondary	= msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= msm_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 9980dc736e7b..8f1eecd88186 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -19,7 +19,6 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <mach/msm_iomap.h>
-#include <mach/system.h>
 
 #include "proc_comm.h"
 
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
index 657be73297db..c5a2eddc6cdc 100644
--- a/arch/arm/mach-msm/smd.c
+++ b/arch/arm/mach-msm/smd.c
@@ -30,7 +30,6 @@
 #include <linux/delay.h>
 
 #include <mach/msm_smd.h>
-#include <mach/system.h>
 
 #include "smd_private.h"
 #include "proc_comm.h"
@@ -39,8 +38,6 @@
 #define CONFIG_QDSP6 1
 #endif
 
-void (*msm_hw_reset_hook)(void);
-
 #define MODULE_NAME "msm_smd"
 
 enum {
@@ -52,13 +49,14 @@ static int msm_smd_debug_mask;
 
 struct shared_info {
 	int ready;
-	unsigned state;
+	void __iomem *state;
 };
 
 static unsigned dummy_state[SMSM_STATE_COUNT];
 
 static struct shared_info smd_info = {
-	.state = (unsigned) &dummy_state,
+	/* FIXME: not a real __iomem pointer */
+	.state = &dummy_state,
 };
 
 module_param_named(debug_mask, msm_smd_debug_mask,
@@ -101,10 +99,6 @@ static void handle_modem_crash(void)
 	pr_err("ARM9 has CRASHED\n");
 	smd_diag();
 
-	/* hard reboot if possible */
-	if (msm_hw_reset_hook)
-		msm_hw_reset_hook();
-
 	/* in this case the modem or watchdog should reboot us */
 	for (;;)
 		;
@@ -796,22 +790,22 @@ void *smem_alloc(unsigned id, unsigned size)
 	return smem_find(id, size);
 }
 
-void *smem_item(unsigned id, unsigned *size)
+void __iomem *smem_item(unsigned id, unsigned *size)
 {
 	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
 	struct smem_heap_entry *toc = shared->heap_toc;
 
 	if (id >= SMEM_NUM_ITEMS)
-		return 0;
+		return NULL;
 
 	if (toc[id].allocated) {
 		*size = toc[id].size;
-		return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset);
+		return (MSM_SHARED_RAM_BASE + toc[id].offset);
 	} else {
 		*size = 0;
 	}
 
-	return 0;
+	return NULL;
 }
 
 void *smem_find(unsigned id, unsigned size_in)
@@ -857,7 +851,7 @@ static irqreturn_t smsm_irq_handler(int irq, void *data)
 int smsm_change_state(enum smsm_state_item item,
 		      uint32_t clear_mask, uint32_t set_mask)
 {
-	unsigned long addr = smd_info.state + item * 4;
+	void __iomem *addr = smd_info.state + item * 4;
 	unsigned long flags;
 	unsigned state;
 
@@ -943,10 +937,10 @@ int smd_core_init(void)
 	/* wait for essential items to be initialized */
 	for (;;) {
 		unsigned size;
-		void *state;
+		void __iomem *state;
 		state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
 		if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
-			smd_info.state = (unsigned)state;
+			smd_info.state = state;
 			break;
 		}
 	}
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 812808254936..476549a8a709 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -1,7 +1,7 @@
 /*
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -20,15 +20,16 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
 
-#include <mach/msm_iomap.h>
-#include <mach/cpu.h>
-#include <mach/board.h>
+#include "common.h"
 
 #define TIMER_MATCH_VAL         0x0000
 #define TIMER_COUNT_VAL         0x0004
@@ -36,7 +37,6 @@
 #define TIMER_ENABLE_CLR_ON_MATCH_EN    BIT(1)
 #define TIMER_ENABLE_EN                 BIT(0)
 #define TIMER_CLEAR             0x000C
-#define DGT_CLK_CTL             0x0034
 #define DGT_CLK_CTL_DIV_4	0x3
 
 #define GPT_HZ 32768
@@ -101,7 +101,7 @@ static struct clock_event_device msm_clockevent = {
 
 static union {
 	struct clock_event_device *evt;
-	struct clock_event_device __percpu **percpu_evt;
+	struct clock_event_device * __percpu *percpu_evt;
 } msm_evt;
 
 static void __iomem *source_base;
@@ -151,7 +151,7 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
 
 	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
 	clockevents_register_device(evt);
-	enable_percpu_irq(evt->irq, 0);
+	enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
 	return 0;
 }
 
@@ -172,44 +172,21 @@ static notrace u32 msm_sched_clock_read(void)
 	return msm_clocksource.read(&msm_clocksource);
 }
 
-static void __init msm_timer_init(void)
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+				  bool percpu)
 {
 	struct clock_event_device *ce = &msm_clockevent;
 	struct clocksource *cs = &msm_clocksource;
 	int res;
-	u32 dgt_hz;
-
-	if (cpu_is_msm7x01()) {
-		event_base = MSM_CSR_BASE;
-		source_base = MSM_CSR_BASE + 0x10;
-		dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */
-		cs->read = msm_read_timer_count_shift;
-		cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-	} else if (cpu_is_msm7x30()) {
-		event_base = MSM_CSR_BASE + 0x04;
-		source_base = MSM_CSR_BASE + 0x24;
-		dgt_hz = 24576000 / 4;
-	} else if (cpu_is_qsd8x50()) {
-		event_base = MSM_CSR_BASE;
-		source_base = MSM_CSR_BASE + 0x10;
-		dgt_hz = 19200000 / 4;
-	} else if (cpu_is_msm8x60() || cpu_is_msm8960()) {
-		event_base = MSM_TMR_BASE + 0x04;
-		/* Use CPU0's timer as the global clock source. */
-		source_base = MSM_TMR0_BASE + 0x24;
-		dgt_hz = 27000000 / 4;
-		writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
-	} else
-		BUG();
 
 	writel_relaxed(0, event_base + TIMER_ENABLE);
 	writel_relaxed(0, event_base + TIMER_CLEAR);
 	writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
 	ce->cpumask = cpumask_of(0);
+	ce->irq = irq;
 
-	ce->irq = INT_GP_TIMER_EXP;
 	clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
-	if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+	if (percpu) {
 		msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
 		if (!msm_evt.percpu_evt) {
 			pr_err("memory allocation failed for %s\n", ce->name);
@@ -219,7 +196,7 @@ static void __init msm_timer_init(void)
 		res = request_percpu_irq(ce->irq, msm_timer_interrupt,
 					 ce->name, msm_evt.percpu_evt);
 		if (!res) {
-			enable_percpu_irq(ce->irq, 0);
+			enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
 #ifdef CONFIG_LOCAL_TIMERS
 			local_timer_register(&msm_local_timer_ops);
 #endif
@@ -238,10 +215,143 @@ err:
 	res = clocksource_register_hz(cs, dgt_hz);
 	if (res)
 		pr_err("clocksource_register failed\n");
-	setup_sched_clock(msm_sched_clock_read,
-			cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
+	setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
 }
 
-struct sys_timer msm_timer = {
-	.init = msm_timer_init
+#ifdef CONFIG_OF
+static const struct of_device_id msm_dgt_match[] __initconst = {
+	{ .compatible = "qcom,msm-dgt" },
+	{ },
+};
+
+static const struct of_device_id msm_gpt_match[] __initconst = {
+	{ .compatible = "qcom,msm-gpt" },
+	{ },
+};
+
+static void __init msm_dt_timer_init(void)
+{
+	struct device_node *np;
+	u32 freq;
+	int irq;
+	struct resource res;
+	u32 percpu_offset;
+	void __iomem *dgt_clk_ctl;
+
+	np = of_find_matching_node(NULL, msm_gpt_match);
+	if (!np) {
+		pr_err("Can't find GPT DT node\n");
+		return;
+	}
+
+	event_base = of_iomap(np, 0);
+	if (!event_base) {
+		pr_err("Failed to map event base\n");
+		return;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0) {
+		pr_err("Can't get irq\n");
+		return;
+	}
+	of_node_put(np);
+
+	np = of_find_matching_node(NULL, msm_dgt_match);
+	if (!np) {
+		pr_err("Can't find DGT DT node\n");
+		return;
+	}
+
+	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("Failed to parse DGT resource\n");
+		return;
+	}
+
+	source_base = ioremap(res.start + percpu_offset, resource_size(&res));
+	if (!source_base) {
+		pr_err("Failed to map source base\n");
+		return;
+	}
+
+	if (!of_address_to_resource(np, 1, &res)) {
+		dgt_clk_ctl = ioremap(res.start + percpu_offset,
+				      resource_size(&res));
+		if (!dgt_clk_ctl) {
+			pr_err("Failed to map DGT control base\n");
+			return;
+		}
+		writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl);
+		iounmap(dgt_clk_ctl);
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", &freq)) {
+		pr_err("Unknown frequency\n");
+		return;
+	}
+	of_node_put(np);
+
+	msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+
+struct sys_timer msm_dt_timer = {
+	.init = msm_dt_timer_init
+};
+#endif
+
+static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
+{
+	event_base = ioremap(event, SZ_64);
+	if (!event_base) {
+		pr_err("Failed to map event base\n");
+		return 1;
+	}
+	source_base = ioremap(source, SZ_64);
+	if (!source_base) {
+		pr_err("Failed to map source base\n");
+		return 1;
+	}
+	return 0;
+}
+
+static void __init msm7x01_timer_init(void)
+{
+	struct clocksource *cs = &msm_clocksource;
+
+	if (msm_timer_map(0xc0100000, 0xc0100010))
+		return;
+	cs->read = msm_read_timer_count_shift;
+	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+	/* 600 KHz */
+	msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+			false);
+}
+
+struct sys_timer msm7x01_timer = {
+	.init = msm7x01_timer_init
+};
+
+static void __init msm7x30_timer_init(void)
+{
+	if (msm_timer_map(0xc0100004, 0xc0100024))
+		return;
+	msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+struct sys_timer msm7x30_timer = {
+	.init = msm7x30_timer_init
+};
+
+static void __init qsd8x50_timer_init(void)
+{
+	if (msm_timer_map(0xAC100000, 0xAC100010))
+		return;
+	msm_timer_init(19200000 / 4, 32, 7, false);
+}
+
+struct sys_timer qsd8x50_timer = {
+	.init = qsd8x50_timer_init
 };
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 62b53d710efd..343c435b4176 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -13,6 +13,7 @@
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
 #include "common.h"
 
 /*
@@ -37,7 +38,7 @@
 #define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
 
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
 	/*
 	 * Find the control register base address for this window.
@@ -47,7 +48,7 @@ static void __init __iomem *win_cfg_base(int win)
 	 * so we don't need to take that into account here.
 	 */
 
-	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+	return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
 }
 
 /*
@@ -71,17 +72,17 @@ void __init mv78xx0_setup_cpu_mbus(void)
 	 */
 	if (mv78xx0_core_index() == 0)
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU0_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU0_BASE);
 	else
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU1_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU1_BASE);
 }
 
 void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
 				      int maj, int min)
 {
 	orion_setup_cpu_win(&addr_map_cfg, window, base, size,
-			    TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
+			    TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0);
 }
 
 void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b4c53b846c9c..131cd4883f3d 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -20,8 +20,8 @@
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -130,17 +130,12 @@ static int get_tclk(void)
  ****************************************************************************/
 static struct map_desc mv78xx0_io_desc[] __initdata = {
 	{
-		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
 		.pfn		= 0,
 		.length		= MV78XX0_CORE_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= MV78XX0_PCIE_IO_VIRT_BASE(0),
-		.pfn		= __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
-		.length		= MV78XX0_PCIE_IO_SIZE * 8,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MV78XX0_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
 		.length		= MV78XX0_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -213,7 +208,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR);
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -224,7 +220,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ);
+			NO_IRQ,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index eb187e0e059b..5f03484584d4 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -11,18 +11,18 @@
 
 #include <mach/mv78xx0.h>
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_ERR_OFF	0x0000
 #define IRQ_CAUSE_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0008
@@ -30,7 +30,7 @@
 #define IRQ_MASK_LOW_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
deleted file mode 100644
index c7d9d00d8fc1..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a)			__io(a)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index e807c4c52a0b..46200a183cf2 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -29,28 +29,27 @@
  *
  * virt		phys		size
  * fe400000	f102x000	16K	core-specific peripheral registers
- * fe700000	f0800000	1M	PCIe #0 I/O space
- * fe800000	f0900000	1M	PCIe #1 I/O space
- * fe900000	f0a00000	1M	PCIe #2 I/O space
- * fea00000	f0b00000	1M	PCIe #3 I/O space
- * feb00000	f0c00000	1M	PCIe #4 I/O space
- * fec00000	f0d00000	1M	PCIe #5 I/O space
- * fed00000	f0e00000	1M	PCIe #6 I/O space
- * fee00000	f0f00000	1M	PCIe #7 I/O space
- * fef00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f0800000	64K	PCIe #0 I/O space
+ * fee10000	f0900000	64K	PCIe #1 I/O space
+ * fee20000	f0a00000	64K	PCIe #2 I/O space
+ * fee30000	f0b00000	64K	PCIe #3 I/O space
+ * fee40000	f0c00000	64K	PCIe #4 I/O space
+ * fee50000	f0d00000	64K	PCIe #5 I/O space
+ * fee60000	f0e00000	64K	PCIe #6 I/O space
+ * fee70000	f0f00000	64K	PCIe #7 I/O space
+ * fd000000	f1000000	1M	on-chip peripheral registers
  */
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_VIRT_BASE	IOMEM(0xfe400000)
 #define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K
 
 #define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
 #define MV78XX0_PCIE_IO_SIZE		SZ_1M
 
 #define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfef00000
+#define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfd000000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
@@ -65,47 +64,47 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1570)
-
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE | 0x0100)
-#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
-#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE + 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE + 0x1570)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE + 0x0100)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1100)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
  * Supported devices and revisions.
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index eff9a750bbe2..32073444024b 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -10,7 +10,9 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include <plat/irq.h>
 #include "common.h"
 
@@ -23,16 +25,16 @@ static int __initdata gpio0_irqs[4] = {
 
 void __init mv78xx0_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
 			mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 2e56e86b6d68..a9a154a646dd 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -15,6 +15,7 @@
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
 #include "common.h"
 
 struct pcie_port {
@@ -23,119 +24,73 @@ struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
-	char			io_space_name[16];
 	char			mem_space_name[16];
-	struct resource		res[2];
+	struct resource		res;
 };
 
 static struct pcie_port pcie_port[8];
 static int num_pcie_ports;
 static struct resource pcie_io_space;
-static struct resource pcie_mem_space;
-
 
 void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 {
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE00_VIRT_BASE);
 }
 
+u32 pcie_port_size[8] = {
+	0,
+	0x30000000,
+	0x10000000,
+	0x10000000,
+	0x08000000,
+	0x08000000,
+	0x08000000,
+	0x04000000,
+};
+
 static void __init mv78xx0_pcie_preinit(void)
 {
 	int i;
 	u32 size_each;
 	u32 start;
-	int win;
+	int win = 0;
 
 	pcie_io_space.name = "PCIe I/O Space";
 	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
 	pcie_io_space.end =
 		MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
-	pcie_io_space.flags = IORESOURCE_IO;
+	pcie_io_space.flags = IORESOURCE_MEM;
 	if (request_resource(&iomem_resource, &pcie_io_space))
 		panic("can't allocate PCIe I/O space");
 
-	pcie_mem_space.name = "PCIe MEM Space";
-	pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
-	pcie_mem_space.end =
-		MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
-	pcie_mem_space.flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pcie_mem_space))
-		panic("can't allocate PCIe MEM space");
+	if (num_pcie_ports > 7)
+		panic("invalid number of PCIe ports");
+
+	size_each = pcie_port_size[num_pcie_ports];
 
+	start = MV78XX0_PCIE_MEM_PHYS_BASE;
 	for (i = 0; i < num_pcie_ports; i++) {
 		struct pcie_port *pp = pcie_port + i;
 
-		snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-			"PCIe %d.%d I/O", pp->maj, pp->min);
-		pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-		pp->res[0].name = pp->io_space_name;
-		pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
-		pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
-		pp->res[0].flags = IORESOURCE_IO;
-
 		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 			"PCIe %d.%d MEM", pp->maj, pp->min);
 		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-		pp->res[1].name = pp->mem_space_name;
-		pp->res[1].flags = IORESOURCE_MEM;
-	}
-
-	switch (num_pcie_ports) {
-	case 0:
-		size_each = 0;
-		break;
-
-	case 1:
-		size_each = 0x30000000;
-		break;
-
-	case 2 ... 3:
-		size_each = 0x10000000;
-		break;
-
-	case 4 ... 6:
-		size_each = 0x08000000;
-		break;
-
-	case 7:
-		size_each = 0x04000000;
-		break;
-
-	default:
-		panic("invalid number of PCIe ports");
-	}
-
-	start = MV78XX0_PCIE_MEM_PHYS_BASE;
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		pp->res[1].start = start;
-		pp->res[1].end = start + size_each - 1;
+		pp->res.name = pp->mem_space_name;
+		pp->res.flags = IORESOURCE_MEM;
+		pp->res.start = start;
+		pp->res.end = start + size_each - 1;
 		start += size_each;
-	}
-
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
 
-		if (request_resource(&pcie_io_space, &pp->res[0]))
-			panic("can't allocate PCIe I/O sub-space");
-
-		if (request_resource(&pcie_mem_space, &pp->res[1]))
+		if (request_resource(&iomem_resource, &pp->res))
 			panic("can't allocate PCIe MEM sub-space");
-	}
 
-	win = 0;
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
+		mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start,
+					   resource_size(&pp->res),
+					   pp->maj, pp->min);
 
-		mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
-					  resource_size(&pp->res[0]),
+		mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K,
 					  pp->maj, pp->min);
-
-		mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
-					   resource_size(&pp->res[1]),
-					   pp->maj, pp->min);
 	}
 }
 
@@ -156,8 +111,9 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
 	orion_pcie_setup(pp->base);
 
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
 	return 1;
 }
@@ -267,11 +223,11 @@ static struct hw_pci mv78xx0_pci __initdata = {
 	.map_irq	= mv78xx0_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int maj, int min, unsigned long base)
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
 {
 	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk("link up\n");
@@ -279,9 +235,9 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
 		pp->maj = maj;
 		pp->min = min;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
-		memset(pp->res, 0, sizeof(pp->res));
+		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
 		printk("link down, ignoring\n");
 	}
@@ -293,7 +249,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1)
 
 	if (init_port0) {
 		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
-		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+		if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
 			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
 			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
 			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index caa2c5e734fe..416d46ef7ebd 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,15 +1,39 @@
+config ARCH_MVEBU
+	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+	select PINCTRL
+	select PLAT_ORION
+	select SPARSE_IRQ
+
 if ARCH_MVEBU
 
 menu "Marvell SOC with device tree"
 
 config MACH_ARMADA_370_XP
-	bool "Marvell Armada 370 and Aramada XP boards"
+	bool
 	select ARMADA_370_XP_TIMER
 	select CPU_V7
+
+config MACH_ARMADA_370
+	bool "Marvell Armada 370 boards"
+	select MACH_ARMADA_370_XP
+	select PINCTRL_ARMADA_370
 	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 370 SoC with device tree.
 
-	  Say 'Y' here if you want your kernel to support boards based on
-	  Marvell Armada 370 or Armada XP with device tree.
+config MACH_ARMADA_XP
+	bool "Marvell Armada XP boards"
+	select MACH_ARMADA_370_XP
+	select PINCTRL_ARMADA_XP
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada XP SoC with device tree.
 
 endmenu
 
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index e61d2b8fdf50..57f996b6aa0e 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,2 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-orion/include
+
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
diff --git a/arch/arm/mach-mvebu/Makefile.boot b/arch/arm/mach-mvebu/Makefile.boot
deleted file mode 100644
index 2579a2fc2334..000000000000
--- a/arch/arm/mach-mvebu/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y := 0x00008000
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c
new file mode 100644
index 000000000000..fe454a4430be
--- /dev/null
+++ b/arch/arm/mach-mvebu/addr-map.c
@@ -0,0 +1,134 @@
+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS	1
+#define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
+#define ARMADA_XP_TARGET_ETH1		3
+#define ARMADA_XP_TARGET_PCIE_0_2	4
+#define ARMADA_XP_TARGET_ETH0		7
+#define ARMADA_XP_TARGET_PCIE_1_3	8
+
+#define ARMADA_370_TARGET_DEV_BUS       1
+#define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
+#define ARMADA_370_TARGET_PCIE_0        4
+#define ARMADA_370_TARGET_PCIE_1        8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+	/*
+	 * Window for the BootROM, needed for SMP on Armada XP
+	 */
+	{ 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+	  ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+	{ .compatible = "marvell,armada-addr-decoding-controller" },
+	{ /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+	unsigned int offset;
+
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		offset = (win << 4);
+	else
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+	return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 20,
+	.remappable_wins = 8,
+	.win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+	struct device_node *np;
+	void __iomem *mbus_unit_addr_decoding_base;
+	void __iomem *sdram_addr_decoding_base;
+
+	np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+	if (!np)
+		return -ENODEV;
+
+	mbus_unit_addr_decoding_base = of_iomap(np, 0);
+	BUG_ON(!mbus_unit_addr_decoding_base);
+
+	sdram_addr_decoding_base =
+		mbus_unit_addr_decoding_base +
+		ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+	/*
+	 * Disable, clear and configure windows.
+	 */
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+	else if (of_machine_is_compatible("marvell,armada370"))
+		orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+	else {
+		pr_err("Unsupported SoC\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    sdram_addr_decoding_base);
+	return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 4ef923b032ec..49d791548ad6 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -20,12 +20,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/armada-370-xp.h>
+#include "armada-370-xp.h"
 #include "common.h"
 
 static struct map_desc armada_370_xp_io_desc[] __initdata = {
 	{
-		.virtual	= ARMADA_370_XP_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
 		.length		= ARMADA_370_XP_REGS_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 25f0ca8d7820..aac9bebc6b03 100644
--- a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,7 +16,7 @@
 #define __MACH_ARMADA_370_XP_H
 
 #define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
 #define ARMADA_370_XP_REGS_SIZE		SZ_1M
 
 #endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h
index 40a8c178f10d..40a8c178f10d 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-mvebu/include/mach/gpio.h
diff --git a/arch/arm/mach-mvebu/include/mach/timex.h b/arch/arm/mach-mvebu/include/mach/timex.h
deleted file mode 100644
index ab324a3748f2..000000000000
--- a/arch/arm/mach-mvebu/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Marvell Armada SoC time definitions
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-mvebu/include/mach/uncompress.h b/arch/arm/mach-mvebu/include/mach/uncompress.h
deleted file mode 100644
index d6a100ccf302..000000000000
--- a/arch/arm/mach-mvebu/include/mach/uncompress.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Marvell Armada SoC kernel uncompression UART routines
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/armada-370-xp.h>
-
-#define UART_THR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
-								+ 0x12000))
-#define UART_LSR ((volatile unsigned char *)(ARMADA_370_XP_REGS_PHYS_BASE\
-								+ 0x12014))
-
-#define LSR_THRE	0x20
-
-static void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ccdf83b17cf1..ecc431909d6f 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -1,10 +1,5 @@
 if ARCH_MXS
 
-source "arch/arm/mach-mxs/devices/Kconfig"
-
-config MXS_OCOTP
-	bool
-
 config SOC_IMX23
 	bool
 	select ARM_AMBA
@@ -30,94 +25,4 @@ config MACH_MXS_DT
 	  Include support for Freescale MXS platforms(i.MX23 and i.MX28)
 	  using the device tree for discovery
 
-config MACH_STMP378X_DEVB
-	bool "Support STMP378x_devb Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for STMP378x-devb platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX23EVK
-	bool "Support MX23EVK Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for MX23EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX28EVK
-	bool "Support MX28EVK Platform"
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	select MXS_OCOTP
-	help
-	  Include support for MX28EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MODULE_TX28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_PWM
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-
-config MODULE_M28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_OCOTP
-
-config MODULE_APX4
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_OCOTP
-
-config MACH_TX28
-	bool "Ka-Ro TX28 module"
-	select MODULE_TX28
-
-config MACH_M28EVK
-	bool "Support DENX M28EVK Platform"
-	select MODULE_M28
-
-config MACH_APX4DEVKIT
-	bool "Support Bluegiga APX4 Development Kit"
-	select MODULE_APX4
-
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index e41590ccb437..3d3c8a973062 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,16 +1,6 @@
 # Common support
-obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := icoll.o ocotp.o system.o timer.o mm.o
 
-obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
-
-obj-y += devices/
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 4582999cf080..07b11fe6453f 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -1,10 +1 @@
 zreladdr-y += 0x40008000
-
-dtb-y += imx23-evk.dtb \
-	 imx23-olinuxino.dtb \
-	 imx23-stmp378x_devb.dtb \
-	 imx28-apx4devkit.dtb \
-	 imx28-cfa10036.dtb \
-	 imx28-evk.dtb \
-	 imx28-m28evk.dtb \
-	 imx28-tx28.dtb \
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
deleted file mode 100644
index 9ee5cede3d42..000000000000
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx23.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx23_add_duart(void)
-{
-	struct amba_device *d;
-
-	d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
-				MX23_INT_DUART, 0, 0, 0);
-	return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx23_auart_data[] __initconst;
-#define mx23_add_auart(id)	mxs_add_auart(&mx23_auart_data[id])
-#define mx23_add_auart0()		mx23_add_auart(0)
-#define mx23_add_auart1()		mx23_add_auart(1)
-
-extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
-#define mx23_add_gpmi_nand(pdata)	\
-	mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
-
-extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
-#define mx23_add_mxs_mmc(id, pdata) \
-	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
-
-#define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx23_add_mxsfb(
-		const struct mxsfb_platform_data *pdata);
-
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
deleted file mode 100644
index fcab431060f4..000000000000
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx28_add_duart(void)
-{
-	struct amba_device *d;
-
-	d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
-				MX28_INT_DUART, 0, 0, 0);
-	return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx28_auart_data[] __initconst;
-#define mx28_add_auart(id)	mxs_add_auart(&mx28_auart_data[id])
-#define mx28_add_auart0()		mx28_add_auart(0)
-#define mx28_add_auart1()		mx28_add_auart(1)
-#define mx28_add_auart2()		mx28_add_auart(2)
-#define mx28_add_auart3()		mx28_add_auart(3)
-#define mx28_add_auart4()		mx28_add_auart(4)
-
-extern const struct mxs_fec_data mx28_fec_data[] __initconst;
-#define mx28_add_fec(id, pdata) \
-	mxs_add_fec(&mx28_fec_data[id], pdata)
-
-extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
-#define mx28_add_flexcan(id, pdata)	\
-	mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
-#define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
-#define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
-
-extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
-#define mx28_add_gpmi_nand(pdata)	\
-	mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
-
-extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
-#define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
-
-extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
-#define mx28_add_mxs_mmc(id, pdata) \
-	mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
-
-#define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx28_add_mxsfb(
-		const struct mxsfb_platform_data *pdata);
-
-extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id, pdata) \
-	mxs_add_saif(&mx28_saif_data[id], pdata)
-
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
deleted file mode 100644
index cf50b5a66dda..000000000000
--- a/arch/arm/mach-mxs/devices.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-
-struct platform_device *__init mxs_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		goto err;
-
-	if (dmamask) {
-		/*
-		 * This memory isn't freed when the device is put,
-		 * I don't have a nice idea for that though.  Conceptually
-		 * dma_mask in struct device should not be a pointer.
-		 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
-		 */
-		pdev->dev.dma_mask =
-			kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
-		if (!pdev->dev.dma_mask)
-			/* ret is still -ENOMEM; */
-			goto err;
-
-		*pdev->dev.dma_mask = dmamask;
-		pdev->dev.coherent_dma_mask = dmamask;
-	}
-
-	if (res) {
-		ret = platform_device_add_resources(pdev, res, num_resources);
-		if (ret)
-			goto err;
-	}
-
-	if (data) {
-		ret = platform_device_add_data(pdev, data, size_data);
-		if (ret)
-			goto err;
-	}
-
-	ret = platform_device_add(pdev);
-	if (ret) {
-err:
-		if (dmamask)
-			kfree(pdev->dev.dma_mask);
-		platform_device_put(pdev);
-		return ERR_PTR(ret);
-	}
-
-	return pdev;
-}
-
-struct device mxs_apbh_bus = {
-	.init_name	= "mxs_apbh",
-	.parent         = &platform_bus,
-};
-
-static int __init mxs_device_init(void)
-{
-	return device_register(&mxs_apbh_bus);
-}
-core_initcall(mxs_device_init);
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
deleted file mode 100644
index 19659de1c4e8..000000000000
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-config MXS_HAVE_AMBA_DUART
-	bool
-
-config MXS_HAVE_PLATFORM_AUART
-	bool
-
-config MXS_HAVE_PLATFORM_FEC
-	bool
-
-config MXS_HAVE_PLATFORM_FLEXCAN
-	select HAVE_CAN_FLEXCAN if CAN
-	bool
-
-config MXS_HAVE_PLATFORM_GPMI_NAND
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_I2C
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_MMC
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_PWM
-	bool
-
-config MXS_HAVE_PLATFORM_MXSFB
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_SAIF
-	bool
-
-config MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
deleted file mode 100644
index 5f72d9787444..000000000000
--- a/arch/arm/mach-mxs/devices/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
-obj-y += platform-dma.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
-obj-y += platform-gpio-mxs.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c
deleted file mode 100644
index 27608f5d2ac8..000000000000
--- a/arch/arm/mach-mxs/devices/platform-auart.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_auart_data_entry_single(soc, _id, hwid)			\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _AUART ## hwid ## _BASE_ADDR,		\
-		.irq = soc ## _INT_AUART ## hwid,			\
-	}
-
-#define mxs_auart_data_entry(soc, _id, hwid)				\
-	[_id] = mxs_auart_data_entry_single(soc, _id, hwid)
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_auart_data mx23_auart_data[] __initconst = {
-#define mx23_auart_data_entry(_id, hwid)				\
-	mxs_auart_data_entry(MX23, _id, hwid)
-	mx23_auart_data_entry(0, 1),
-	mx23_auart_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_auart_data mx28_auart_data[] __initconst = {
-#define mx28_auart_data_entry(_id)					\
-	mxs_auart_data_entry(MX28, _id, _id)
-	mx28_auart_data_entry(0),
-	mx28_auart_data_entry(1),
-	mx28_auart_data_entry(2),
-	mx28_auart_data_entry(3),
-	mx28_auart_data_entry(4),
-};
-#endif
-
-struct platform_device *__init mxs_add_auart(
-		const struct mxs_auart_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("mxs-auart", data->id,
-					res, ARRAY_SIZE(res), NULL, 0,
-					DMA_BIT_MASK(32));
-}
-
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
deleted file mode 100644
index 46824501de00..000000000000
--- a/arch/arm/mach-mxs/devices/platform-dma.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_dma(const char *devid,
-						resource_size_t base)
-{
-	struct resource res[] = {
-		{
-			.start = base,
-			.end = base + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}
-	};
-
-	return mxs_add_platform_device_dmamask(devid, -1,
-				res, ARRAY_SIZE(res), NULL, 0,
-				DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
deleted file mode 100644
index ae96a4fd8f14..000000000000
--- a/arch/arm/mach-mxs/devices/platform-fec.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_fec_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR,	\
-		.irq = soc ## _INT_ENET_MAC ## _id,			\
-	}
-
-#define mxs_fec_data_entry(soc, _id)					\
-	[_id] = mxs_fec_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_fec_data mx28_fec_data[] __initconst = {
-#define mx28_fec_data_entry(_id)					\
-	mxs_fec_data_entry(MX28, _id)
-	mx28_fec_data_entry(0),
-	mx28_fec_data_entry(1),
-};
-#endif
-
-struct platform_device *__init mxs_add_fec(
-		const struct mxs_fec_data *data,
-		const struct fec_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx28-fec", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
-			DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c
deleted file mode 100644
index 43a6b4bae6fe..000000000000
--- a/arch/arm/mach-mxs/devices/platform-flexcan.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2010, 2011 Pengutronix,
- *                          Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CAN ## _hwid,			\
-	}
-
-#define mxs_flexcan_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
-#define mx28_flexcan_data_entry(_id, _hwid)				\
-	mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
-	mx28_flexcan_data_entry(0, 0),
-	mx28_flexcan_data_entry(1, 1),
-};
-#endif /* ifdef CONFIG_SOC_IMX28 */
-
-struct platform_device *__init mxs_add_flexcan(
-		const struct mxs_flexcan_data *data,
-		const struct flexcan_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("flexcan", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
deleted file mode 100644
index cd99f19ec637..000000000000
--- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_gpio(
-	char *name, int id, resource_size_t iobase, int irq)
-{
-	struct resource res[] = {
-		{
-			.start = iobase,
-			.end = iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = irq,
-			.end = irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return platform_device_register_resndata(&mxs_apbh_bus,
-			name, id, res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
deleted file mode 100644
index 3e22df5944a8..000000000000
--- a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/dma-mapping.h>
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
-	.devid = "imx23-gpmi-nand",
-	.res = {
-		/* GPMI */
-		DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
-					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
-					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-		/* BCH */
-		DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
-					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
-					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-		/* DMA */
-		DEFINE_RES_NAMED(MX23_DMA_GPMI0,
-					MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME,
-					IORESOURCE_DMA),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-	},
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
-	.devid = "imx28-gpmi-nand",
-	.res = {
-		/* GPMI */
-		DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
-					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
-					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-		/* BCH */
-		DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
-					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
-					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-		/* DMA */
-		DEFINE_RES_NAMED(MX28_DMA_GPMI0,
-					MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME,
-					IORESOURCE_DMA),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-	},
-};
-#endif
-
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-		const struct mxs_gpmi_nand_data *data)
-{
-	return mxs_add_platform_device_dmamask(data->devid, -1,
-				data->res, GPMI_NAND_RES_SIZE,
-				pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
deleted file mode 100644
index 79222ec8ede1..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_i2c_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _I2C ## _id ## _BASE_ADDR,		\
-		.errirq = soc ## _INT_I2C ## _id ## _ERROR,		\
-		.dmairq = soc ## _INT_I2C ## _id ## _DMA,		\
-	}
-
-#define mxs_i2c_data_entry(soc, _id)					\
-	[_id] = mxs_i2c_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
-	mxs_i2c_data_entry(MX28, 0),
-	mxs_i2c_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_i2c(
-		const struct mxs_mxs_i2c_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->errirq,
-			.end = data->errirq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dmairq,
-			.end = data->dmairq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("mxs-i2c", data->id, res,
-					ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
deleted file mode 100644
index b33c9d05c552..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)		\
-	{								\
-		.devid = _devid,					\
-		.id = _id,						\
-		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
-		.dma = soc ## _DMA_SSP ## hwid,				\
-		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
-		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
-	}
-
-#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid)			\
-	[_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
-
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
-	mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
-	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_mmc(
-		const struct mxs_mxs_mmc_data *data,
-		const struct mxs_mmc_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start	= data->iobase,
-			.end	= data->iobase + SZ_8K - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= data->dma,
-			.end	= data->dma,
-			.flags	= IORESOURCE_DMA,
-		}, {
-			.start	= data->irq_err,
-			.end	= data->irq_err,
-			.flags	= IORESOURCE_IRQ,
-		}, {
-			.start	= data->irq_dma,
-			.end	= data->irq_dma,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device(data->devid, data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
deleted file mode 100644
index 680f5a902936..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
-{
-	struct resource res = {
-		.flags = IORESOURCE_MEM,
-	};
-
-	res.start = iobase + 0x10 + 0x20 * id;
-	res.end = res.start + 0x1f;
-
-	return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
deleted file mode 100644
index f6e3a60b4201..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_saif_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _SAIF ## _id ## _BASE_ADDR,		\
-		.irq = soc ## _INT_SAIF ## _id,				\
-		.dma = soc ## _DMA_SAIF ## _id,				\
-		.dmairq = soc ## _INT_SAIF ## _id ##_DMA,		\
-	}
-
-#define mxs_saif_data_entry(soc, _id)					\
-	[_id] = mxs_saif_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_saif_data mx28_saif_data[] __initconst = {
-	mxs_saif_data_entry(MX28, 0),
-	mxs_saif_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
-				const struct mxs_saif_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dma,
-			.end = data->dma,
-			.flags = IORESOURCE_DMA,
-		}, {
-			.start = data->dmairq,
-			.end = data->dmairq,
-			.flags = IORESOURCE_IRQ,
-		},
-
-	};
-
-	return mxs_add_platform_device("mxs-saif", data->id, res,
-				ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
deleted file mode 100644
index 76b53f73418e..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_mxsfb(
-		const struct mxsfb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = MX23_LCDIF_BASE_ADDR,
-			.end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx23-fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_mxsfb(
-		const struct mxsfb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = MX28_LCDIF_BASE_ADDR,
-			.end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx28-fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
deleted file mode 100644
index 639eaee15553..000000000000
--- a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
-{
-	struct resource res[] = {
-		{
-			.start = MX23_RTC_BASE_ADDR,
-			.end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = MX23_INT_RTC_ALARM,
-			.end = MX23_INT_RTC_ALARM,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-					NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
-{
-	struct resource res[] = {
-		{
-			.start = MX28_RTC_BASE_ADDR,
-			.end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = MX28_INT_RTC_ALARM,
-			.end = MX28_INT_RTC_ALARM,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-					NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index 23ca9d083b2c..8fb23af154b3 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -19,20 +19,27 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/io.h>
-
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <asm/exception.h>
 #include <mach/mxs.h>
 #include <mach/common.h>
 
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
+#define HW_ICOLL_STAT_OFFSET			0x0070
 #define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
 #define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
 #define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
+#define ICOLL_NUM_IRQS		128
+
 static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
 {
@@ -48,13 +55,13 @@ static void icoll_ack_irq(struct irq_data *d)
 static void icoll_mask_irq(struct irq_data *d)
 {
 	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq));
+			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
 	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq));
+			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -63,18 +70,56 @@ static struct irq_chip mxs_icoll_chip = {
 	.irq_unmask = icoll_unmask_irq,
 };
 
-void __init icoll_init_irq(void)
+asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
-	int i;
+	u32 irqnr;
+
+	do {
+		irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
+		if (irqnr != 0x7f) {
+			__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+			irqnr = irq_find_mapping(icoll_domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		break;
+	} while (1);
+}
+
+static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
 
+static struct irq_domain_ops icoll_irq_domain_ops = {
+	.map = icoll_irq_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+void __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
 	mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
 
-	for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
-		irq_set_chip_and_handler(i, &mxs_icoll_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
+	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
+					     &icoll_irq_domain_ops, NULL);
+	WARN_ON(!icoll_domain);
+}
+
+static const struct of_device_id icoll_of_match[] __initconst = {
+	{.compatible = "fsl,icoll", .data = icoll_of_init},
+	{ /* sentinel */ }
+};
+
+void __init icoll_init_irq(void)
+{
+	of_irq_init(icoll_of_match);
 }
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index de6c7ba42544..be5a9c93cb2a 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -13,25 +13,17 @@
 
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(int);
+extern void mxs_timer_init(void);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
-extern void mx23_soc_init(void);
 extern int mx23_clocks_init(void);
 extern void mx23_map_io(void);
-extern void mx23_init_irq(void);
 
-extern void mx28_soc_init(void);
 extern int mx28_clocks_init(void);
 extern void mx28_map_io(void);
-extern void mx28_init_irq(void);
 
 extern void icoll_init_irq(void);
-
-extern struct platform_device *mxs_add_dma(const char *devid,
-						resource_size_t base);
-extern struct platform_device *mxs_add_gpio(char *name, int id,
-					    resource_size_t iobase, int irq);
+extern void icoll_handle_irq(struct pt_regs *);
 
 #endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
deleted file mode 100644
index e8b1d958240b..000000000000
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/amba/bus.h>
-
-extern struct device mxs_apbh_bus;
-
-struct platform_device *mxs_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask);
-
-static inline struct platform_device *mxs_add_platform_device(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data)
-{
-	return mxs_add_platform_device_dmamask(
-			name, id, res, num_resources, data, size_data, 0);
-}
-
-/* auart */
-struct mxs_auart_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_auart(
-		const struct mxs_auart_data *data);
-
-/* fec */
-#include <linux/fec.h>
-struct mxs_fec_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_fec(
-		const struct mxs_fec_data *data,
-		const struct fec_platform_data *pdata);
-
-/* flexcan */
-#include <linux/can/platform/flexcan.h>
-struct mxs_flexcan_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_flexcan(
-		const struct mxs_flexcan_data *data,
-		const struct flexcan_platform_data *pdata);
-
-/* gpmi-nand */
-#include <linux/mtd/gpmi-nand.h>
-struct mxs_gpmi_nand_data {
-	const char *devid;
-	const struct resource res[GPMI_NAND_RES_SIZE];
-};
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-		const struct mxs_gpmi_nand_data *data);
-
-/* i2c */
-struct mxs_mxs_i2c_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t errirq;
-	resource_size_t dmairq;
-};
-struct platform_device * __init mxs_add_mxs_i2c(
-		const struct mxs_mxs_i2c_data *data);
-
-/* mmc */
-#include <linux/mmc/mxs-mmc.h>
-struct mxs_mxs_mmc_data {
-	const char *devid;
-	int id;
-	resource_size_t iobase;
-	resource_size_t dma;
-	resource_size_t irq_err;
-	resource_size_t irq_dma;
-};
-struct platform_device *__init mxs_add_mxs_mmc(
-		const struct mxs_mxs_mmc_data *data,
-		const struct mxs_mmc_platform_data *pdata);
-
-/* pwm */
-struct platform_device *__init mxs_add_mxs_pwm(
-		resource_size_t iobase, int id);
-
-/* saif */
-#include <sound/saif.h>
-struct mxs_saif_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t irq;
-	resource_size_t dma;
-	resource_size_t dmairq;
-};
-
-struct platform_device *__init mxs_add_saif(
-		const struct mxs_saif_data *data,
-		const struct mxs_saif_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
deleted file mode 100644
index b0190a4822f2..000000000000
--- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *									BANK	PIN	MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_LCD_D00__LCD_D00		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-
-#define MX23_PAD_SSP1_CMD__SSP1_CMD		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_EMI_D00__EMI_D00		MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01		MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02		MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03		MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08		MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09		MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12		MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13		MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14		MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15		MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0		MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1		MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0		MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1		MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK		MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-
-#define MX23_PAD_LCD_D00__ETM_DA8		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK	MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK	MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX23_PAD_SSP1_CMD__JTAG_TDO		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_LCD_D00__GPIO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26		MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27		MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_SSP1_CMD__GPIO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
deleted file mode 100644
index f50fefd10520..000000000000
--- a/arch/arm/mach-mxs/include/mach/iomux-mx28.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX28_H__
-#define __MACH_IOMUX_MX28_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *									BANK	PIN	MUX
- */
-/* MUXSEL_0 */
-#define MX28_PAD_GPMI_D00__GPMI_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D01__GPMI_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D02__GPMI_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D03__GPMI_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D04__GPMI_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D05__GPMI_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D06__GPMI_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D07__GPMI_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDN__GPMI_RDN			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_WRN__GPMI_WRN			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_ALE__GPMI_ALE			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CLE__GPMI_CLE			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-
-#define MX28_PAD_LCD_D00__LCD_D0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D01__LCD_D1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D02__LCD_D2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D03__LCD_D3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D04__LCD_D4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D05__LCD_D5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D06__LCD_D6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D07__LCD_D7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D08__LCD_D8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D09__LCD_D9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D10__LCD_D10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D11__LCD_D11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D12__LCD_D12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D13__LCD_D13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D14__LCD_D14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D15__LCD_D15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D16__LCD_D16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D17__LCD_D17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D18__LCD_D18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D19__LCD_D19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D20__LCD_D20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D21__LCD_D21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D22__LCD_D22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D23__LCD_D23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RD_E__LCD_RD_E			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RS__LCD_RS				MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_CS__LCD_CS				MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
-
-#define MX28_PAD_SSP0_DATA0__SSP0_D0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA1__SSP0_D1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA2__SSP0_D2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA3__SSP0_D3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA4__SSP0_D4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA5__SSP0_D5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA6__SSP0_D6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA7__SSP0_D7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_CMD__SSP0_CMD			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_SCK__SSP0_SCK			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_SCK__SSP1_SCK			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_CMD__SSP1_CMD			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA0__SSP1_D0			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA3__SSP1_D3			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SCK__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MISO__SSP2_D0			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS0__SSP2_D3			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS1__SSP2_D4			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS2__SSP2_D5			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SCK__SSP3_SCK			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MISO__SSP3_D0			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SS0__SSP3_D3			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-
-#define MX28_PAD_AUART0_RX__AUART0_RX			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_TX__AUART0_TX			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_CTS__AUART0_CTS			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RTS__AUART0_RTS			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RX__AUART1_RX			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_TX__AUART1_TX			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_CTS__AUART1_CTS			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RTS__AUART1_RTS			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RX__AUART2_RX			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_TX__AUART2_TX			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_CTS__AUART2_CTS			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RTS__AUART2_RTS			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RX__AUART3_RX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_TX__AUART3_TX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_CTS__AUART3_CTS			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RTS__AUART3_RTS			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX28_PAD_PWM0__PWM_0				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX28_PAD_PWM1__PWM_1				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX28_PAD_PWM2__PWM_2				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SCL__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SDA__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SPDIF__SPDIF_TX			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
-#define MX28_PAD_PWM3__PWM_3				MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
-#define MX28_PAD_PWM4__PWM_4				MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RESET__LCD_RESET			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
-
-#define MX28_PAD_ENET0_MDC__ENET0_MDC			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_COL__ENET0_COL			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_CRS__ENET0_CRS			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_D00__EMI_DATA0			MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D01__EMI_DATA1			MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D02__EMI_DATA2			MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D03__EMI_DATA3			MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D04__EMI_DATA4			MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D05__EMI_DATA5			MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D06__EMI_DATA6			MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D07__EMI_DATA7			MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D08__EMI_DATA8			MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D09__EMI_DATA9			MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D10__EMI_DATA10			MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D11__EMI_DATA11			MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D12__EMI_DATA12			MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D13__EMI_DATA13			MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D14__EMI_DATA14			MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D15__EMI_DATA15			MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT0__EMI_ODT0			MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM0__EMI_DQM0			MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT1__EMI_ODT1			MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM1__EMI_DQM1			MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CLK__EMI_CLK			MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS0__EMI_DQS0			MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS1__EMI_DQS1			MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_A00__EMI_ADDR0			MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A01__EMI_ADDR1			MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A02__EMI_ADDR2			MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A03__EMI_ADDR3			MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A04__EMI_ADDR4			MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A05__EMI_ADDR5			MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A06__EMI_ADDR6			MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A07__EMI_ADDR7			MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A08__EMI_ADDR8			MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A09__EMI_ADDR9			MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A10__EMI_ADDR10			MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A11__EMI_ADDR11			MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A12__EMI_ADDR12			MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A13__EMI_ADDR13			MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A14__EMI_ADDR14			MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA0__EMI_BA0			MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA1__EMI_BA1			MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA2__EMI_BA2			MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CASN__EMI_CASN			MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_RASN__EMI_RASN			MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_WEN__EMI_WEN			MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE0N__EMI_CE0N			MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE1N__EMI_CE1N			MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CKE__EMI_CKE			MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX28_PAD_GPMI_D00__SSP1_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D01__SSP1_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D02__SSP1_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D03__SSP1_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D04__SSP1_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D05__SSP1_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D06__SSP1_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D07__SSP1_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE0N__SSP3_D0			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE1N__SSP3_D3			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE2N__CAN1_TX			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE3N__CAN1_RX			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY2__CAN0_TX			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY3__CAN0_RX			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDN__SSP3_SCK			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_WRN__SSP1_SCK			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_ALE__SSP3_D1			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CLE__SSP3_D2			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-
-#define MX28_PAD_LCD_D03__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D04__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D08__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D09__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RS__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_CS__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_SSP0_DATA4__SSP2_D0			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA5__SSP2_D3			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_SCK__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_CMD__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA0__SSP2_D6			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA3__SSP2_D7			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SCK__AUART2_RX			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MOSI__AUART2_TX			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MISO__AUART3_RX			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS0__AUART3_TX			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS1__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS2__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SCK__AUART4_TX			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MOSI__AUART4_RX			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MISO__AUART4_RTS			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SS0__AUART4_CTS			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
-
-#define MX28_PAD_AUART0_RX__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_TX__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_CTS__AUART4_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RTS__AUART4_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RTS__USB0_ID			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RX__SSP3_D1			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_TX__SSP3_D2			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_CTS__I2C1_SCL			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RTS__I2C1_SDA			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RX__CAN0_TX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_TX__CAN0_RX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_CTS__CAN1_TX			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RTS__CAN1_RX			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
-#define MX28_PAD_PWM0__I2C1_SCL				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
-#define MX28_PAD_PWM1__I2C1_SDA				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
-#define MX28_PAD_PWM2__USB0_ID				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_MCLK__PWM_3			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_LRCLK__PWM_4			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_BITCLK__PWM_5			MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_SDATA0__PWM_6			MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF1_SDATA0__PWM_7			MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RESET__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4		MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6		MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7		MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY0__USB0_ID			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_ALE__SSP3_D4			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CLE__SSP3_D5			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_LCD_D00__ETM_DA0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D01__ETM_DA1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D02__ETM_DA2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D03__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D04__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D05__ETM_DA5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D06__ETM_DA6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D07__ETM_DA7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D08__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D09__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D10__ETM_DA10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D11__ETM_DA11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D12__ETM_DA12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D13__ETM_DA13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D14__ETM_DA14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D15__ETM_DA15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D16__ETM_DA7			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D17__ETM_DA6			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D18__ETM_DA5			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D19__ETM_DA4			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D20__ETM_DA3			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D21__ETM_DA2			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D22__ETM_DA1			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D23__ETM_DA0			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_RD_E__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_AUART0_RX__DUART_CTS			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_TX__DUART_RTS			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_CTS__DUART_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RTS__DUART_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RX__PWM_0			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_TX__PWM_1			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RX__SSP3_D4			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_TX__SSP3_D5			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
-#define MX28_PAD_PWM0__DUART_RX				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
-#define MX28_PAD_PWM1__DUART_TX				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
-#define MX28_PAD_PWM2__USB1_OVERCURRENT			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SCL__DUART_RX			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SDA__DUART_TX			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SPDIF__ENET1_RX_ER			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX28_PAD_GPMI_D00__GPIO_0_0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D01__GPIO_0_1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D02__GPIO_0_2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D03__GPIO_0_3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D04__GPIO_0_4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D05__GPIO_0_5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D06__GPIO_0_6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D07__GPIO_0_7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDN__GPIO_0_24			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_WRN__GPIO_0_25			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_ALE__GPIO_0_26			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CLE__GPIO_0_27			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_LCD_D00__GPIO_1_0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D01__GPIO_1_1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D02__GPIO_1_2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D03__GPIO_1_3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D04__GPIO_1_4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D05__GPIO_1_5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D06__GPIO_1_6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D07__GPIO_1_7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D08__GPIO_1_8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D09__GPIO_1_9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D10__GPIO_1_10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D11__GPIO_1_11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D12__GPIO_1_12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D13__GPIO_1_13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D14__GPIO_1_14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D15__GPIO_1_15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D16__GPIO_1_16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D17__GPIO_1_17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D18__GPIO_1_18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D19__GPIO_1_19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D20__GPIO_1_20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D21__GPIO_1_21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D22__GPIO_1_22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D23__GPIO_1_23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RD_E__GPIO_1_24			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RS__GPIO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_CS__GPIO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_CMD__GPIO_2_8			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9			MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_SCK__GPIO_2_10			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_SCK__GPIO_2_12			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_CMD__GPIO_2_13			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SCK__GPIO_2_16			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MISO__GPIO_2_18			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS0__GPIO_2_19			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS1__GPIO_2_20			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS2__GPIO_2_21			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SCK__GPIO_2_24			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MISO__GPIO_2_26			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SS0__GPIO_2_27			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_AUART0_RX__GPIO_3_0			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_TX__GPIO_3_1			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_CTS__GPIO_3_2			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RTS__GPIO_3_3			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RX__GPIO_3_4			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_TX__GPIO_3_5			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_CTS__GPIO_3_6			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RTS__GPIO_3_7			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RX__GPIO_3_8			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_TX__GPIO_3_9			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_CTS__GPIO_3_10			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RTS__GPIO_3_11			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RX__GPIO_3_12			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_TX__GPIO_3_13			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_CTS__GPIO_3_14			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RTS__GPIO_3_15			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM0__GPIO_3_16			MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM1__GPIO_3_17			MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM2__GPIO_3_18			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SCL__GPIO_3_24			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SDA__GPIO_3_25			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SPDIF__GPIO_3_27			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM3__GPIO_3_28			MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM4__GPIO_3_29			MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RESET__GPIO_3_30			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_ENET0_MDC__GPIO_4_0			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_COL__GPIO_4_14			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_CRS__GPIO_4_15			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET_CLK__GPIO_4_16			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h
deleted file mode 100644
index 7abdf58b8bb7..000000000000
--- a/arch/arm/mach-mxs/include/mach/iomux.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *			<armlinux@phytec.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_IOMUX_H__
-#define __MACH_MXS_IOMUX_H__
-
-/*
- * IOMUX/PAD Bit field definitions
- *
- * PAD_BANK:		 0..2	(3)
- * PAD_PIN:		 3..7	(5)
- * PAD_MUXSEL:		 8..9	(2)
- * PAD_MA:		10..11	(2)
- * PAD_MA_VALID:	12	(1)
- * PAD_VOL:		13	(1)
- * PAD_VOL_VALID:	14	(1)
- * PAD_PULL:		15	(1)
- * PAD_PULL_VALID:	16	(1)
- * RESERVED:		17..31	(15)
- */
-typedef u32 iomux_cfg_t;
-
-#define MXS_PAD_BANK_SHIFT	0
-#define MXS_PAD_BANK_MASK	((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
-#define MXS_PAD_PIN_SHIFT	3
-#define MXS_PAD_PIN_MASK	((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
-#define MXS_PAD_MUXSEL_SHIFT	8
-#define MXS_PAD_MUXSEL_MASK	((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
-#define MXS_PAD_MA_SHIFT	10
-#define MXS_PAD_MA_MASK		((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
-#define MXS_PAD_MA_VALID_SHIFT	12
-#define MXS_PAD_MA_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
-#define MXS_PAD_VOL_SHIFT	13
-#define MXS_PAD_VOL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
-#define MXS_PAD_VOL_VALID_SHIFT	14
-#define MXS_PAD_VOL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
-#define MXS_PAD_PULL_SHIFT	15
-#define MXS_PAD_PULL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
-#define MXS_PAD_PULL_VALID_SHIFT 16
-#define MXS_PAD_PULL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
-
-#define PAD_MUXSEL_0		0
-#define PAD_MUXSEL_1		1
-#define PAD_MUXSEL_2		2
-#define PAD_MUXSEL_GPIO		3
-
-#define PAD_4MA			0
-#define PAD_8MA			1
-#define PAD_12MA		2
-#define PAD_16MA		3
-
-#define PAD_1V8			0
-#define PAD_3V3			1
-
-#define PAD_NOPULL		0
-#define PAD_PULLUP		1
-
-#define MXS_PAD_4MA	((PAD_4MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_8MA	((PAD_8MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_12MA	((PAD_12MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_16MA	((PAD_16MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-
-#define MXS_PAD_1V8	((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
-					MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_3V3	((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
-					MXS_PAD_VOL_VALID_MASK)
-
-#define MXS_PAD_NOPULL	((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
-					MXS_PAD_PULL_VALID_MASK)
-#define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
-					MXS_PAD_PULL_VALID_MASK)
-
-/* generic pad control used in most cases */
-#define MXS_PAD_CTRL	(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
-
-#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
-		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
-		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
-		((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |	\
-		((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |		\
-		((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |		\
-		((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
-
-/*
- * A pad becomes naked, when none of mA, vol or pull
- * validity bits is set.
- */
-#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
-		MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
-
-static inline unsigned int PAD_BANK(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
-}
-
-static inline unsigned int PAD_PIN(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
-}
-
-static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
-}
-
-static inline unsigned int PAD_MA(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
-}
-
-static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_VOL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
-}
-
-static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_PULL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
-}
-
-static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
-}
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad);
-
-/*
- * configures multiple pads
- * convenient way to call the above function with tables
- */
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
-
-#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/mach-mxs/include/mach/irqs.h b/arch/arm/mach-mxs/include/mach/irqs.h
deleted file mode 100644
index f771039b814a..000000000000
--- a/arch/arm/mach-mxs/include/mach/irqs.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_IRQS_H__
-#define __MACH_MXS_IRQS_H__
-
-#define MXS_INTERNAL_IRQS	128
-
-#define MXS_GPIO_IRQ_START	MXS_INTERNAL_IRQS
-
-/* the maximum for MXS-based */
-#define MXS_GPIO_IRQS		(32 * 5)
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase MXS_BOARD_IRQS, but keep it
- * within sensible limits.
- */
-#define MXS_BOARD_IRQ_START	(MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
-#define MXS_BOARD_IRQS		16
-
-#define NR_IRQS			(MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
-
-#endif /* __MACH_MXS_IRQS_H__ */
diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c
deleted file mode 100644
index 0e804e2f11f4..000000000000
--- a/arch/arm/mach-mxs/iomux.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *                       <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mxs.h>
-#include <mach/iomux.h>
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad)
-{
-	u32 reg, ofs, bp, bm;
-	void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
-
-	/* muxsel */
-	ofs = 0x100;
-	ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
-	bp = PAD_PIN(pad) % 16 * 2;
-	bm = 0x3 << bp;
-	reg = __raw_readl(iomux_base + ofs);
-	reg &= ~bm;
-	reg |= PAD_MUXSEL(pad) << bp;
-	__raw_writel(reg, iomux_base + ofs);
-
-	/* drive */
-	ofs = cpu_is_mx23() ? 0x200 : 0x300;
-	ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
-	/* mA */
-	if (PAD_MA_VALID(pad)) {
-		bp = PAD_PIN(pad) % 8 * 4;
-		bm = 0x3 << bp;
-		reg = __raw_readl(iomux_base + ofs);
-		reg &= ~bm;
-		reg |= PAD_MA(pad) << bp;
-		__raw_writel(reg, iomux_base + ofs);
-	}
-	/* vol */
-	if (PAD_VOL_VALID(pad)) {
-		bp = PAD_PIN(pad) % 8 * 4 + 2;
-		if (PAD_VOL(pad))
-			__mxs_setl(1 << bp, iomux_base + ofs);
-		else
-			__mxs_clrl(1 << bp, iomux_base + ofs);
-	}
-
-	/* pull */
-	if (PAD_PULL_VALID(pad)) {
-		ofs = cpu_is_mx23() ? 0x400 : 0x600;
-		ofs += PAD_BANK(pad) * 0x10;
-		bp = PAD_PIN(pad);
-		if (PAD_PULL(pad))
-			__mxs_setl(1 << bp, iomux_base + ofs);
-		else
-			__mxs_clrl(1 << bp, iomux_base + ofs);
-	}
-
-	return 0;
-}
-
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
-{
-	const iomux_cfg_t *p = pad_list;
-	int i;
-	int ret;
-
-	for (i = 0; i < count; i++) {
-		ret = mxs_iomux_setup_pad(*p);
-		if (ret)
-			return ret;
-		p++;
-	}
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
deleted file mode 100644
index f5f061757deb..000000000000
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define APX4DEVKIT_GPIO_USERLED	MXS_GPIO_NR(3, 28)
-
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-
-	/* auart1 */
-	MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-
-	/* auart2 */
-	MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-
-	/* i2c */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
-	{
-		.name = "user-led",
-		.default_trigger = "heartbeat",
-		.gpio = APX4DEVKIT_GPIO_USERLED,
-	},
-};
-
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
-	.leds = apx4devkit_leds,
-	.num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
-	.wp_gpio = -EINVAL,
-	.flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
-	{ I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
-	{ I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
-		defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = apx4devkit_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &apx4devkit_vdd_reg_init_data,
-};
-
-static struct platform_device apx4devkit_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &apx4devkit_vdd_pdata,
-	},
-};
-
-static void __init apx4devkit_add_regulators(void)
-{
-	platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-
-static const struct mxs_saif_platform_data
-			apx4devkit_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
-	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
-	return 0;
-}
-
-static void __init apx4devkit_fec_phy_clk_enable(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("enet_out", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-}
-
-static void __init apx4devkit_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
-			ARRAY_SIZE(apx4devkit_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart1();
-	mx28_add_auart2();
-	mx28_add_auart3();
-
-	/*
-	 * Register fixup for the Micrel KS8031 PHY clock
-	 * (shares same ID with KS8051)
-	 */
-	phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
-			apx4devkit_phy_fixup);
-
-	apx4devkit_fec_phy_clk_enable();
-	mx28_add_fec(0, &mx28_fec_pdata);
-
-	mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-
-	gpio_led_register_device(0, &apx4devkit_led_data);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-
-	apx4devkit_add_regulators();
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
-			ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-
-static void __init apx4devkit_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer apx4devkit_timer = {
-	.init	= apx4devkit_timer_init,
-};
-
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &apx4devkit_timer,
-	.init_machine	= apx4devkit_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
deleted file mode 100644
index 4c00c879b893..000000000000
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
-
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-
-static const iomux_cfg_t m28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-
-	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-
-	/* nand */
-	MX28_PAD_GPMI_D00__GPMI_D0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D01__GPMI_D1 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D02__GPMI_D2 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D03__GPMI_D3 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D04__GPMI_D4 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D05__GPMI_D5 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D06__GPMI_D6 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D07__GPMI_D7 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_ALE__GPMI_ALE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_CLE__GPMI_CLE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-
-	/* Backlight */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
-	{
-		.name = "user-led1",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED1,
-	},
-	{
-		.name = "user-led2",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED2,
-	},
-};
-
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
-	.leds = m28evk_leds,
-	.num_leds = ARRAY_SIZE(m28evk_leds),
-};
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init m28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code DENX OUI (C0:E5:4E) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0xC0;
-		mx28_fec_pdata[i].mac[1] = 0xE5;
-		mx28_fec_pdata[i].mac[2] = 0x4E;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
-	{
-		.name		= "Ampire AM-800480R2TMQW-T01H",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 30066, /* picosecond (33.26 MHz) */
-		.left_margin	= 0,
-		.right_margin	= 256,
-		.upper_margin	= 0,
-		.lower_margin	= 45,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
-	.mode_list	= m28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
-	.default_bpp	= 16,
-	.ld_intf_width	= STMLCDIF_18BIT,
-};
-
-static struct at24_platform_data m28evk_eeprom = {
-	.byte_len = 16384,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
-		.platform_data = &m28evk_eeprom,
-	},
-};
-
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static void __init m28evk_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (!m28evk_fec_get_mac()) {
-		mx28_add_fec(0, &mx28_fec_pdata[0]);
-		mx28_add_fec(1, &mx28_fec_pdata[1]);
-	}
-
-	mx28_add_flexcan(0, NULL);
-	mx28_add_flexcan(1, NULL);
-
-	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-
-	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-
-	gpio_led_register_device(0, &m28evk_led_data);
-
-	/* I2C */
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-
-static void __init m28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer m28evk_timer = {
-	.init	= m28evk_timer_init,
-};
-
-MACHINE_START(M28EVK, "DENX M28 EVK")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &m28evk_timer,
-	.init_machine	= m28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
deleted file mode 100644
index e7272a41939d..000000000000
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
-	/* duart */
-	MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-
-	/* mxsfb (lcdif) */
-	MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
-	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D08__SSP1_DATA4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D09__SSP1_DATA5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D10__SSP1_DATA6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D11__SSP1_DATA7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX23_PAD_PWM4__GPIO_1_30 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX23_PAD_PWM3__GPIO_1_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
-	{
-		.name		= "Samsung-LMS430HF02",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 272,
-		.pixclock	= 108096, /* picosecond (9.2 MHz) */
-		.left_margin	= 15,
-		.right_margin	= 8,
-		.upper_margin	= 12,
-		.lower_margin	= 4,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx23evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx23evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
-	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
-	.flags = SLOTF_8_BIT_CAPABLE,
-};
-
-static void __init mx23evk_init(void)
-{
-	int ret;
-
-	mx23_soc_init();
-
-	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-
-	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-			       "mmc0-slot-power");
-	if (ret)
-		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-
-	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
-	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-
-	ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_BL_ENABLE, 1);
-
-	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
-	mx23_add_rtc_stmp3xxx();
-}
-
-static void __init mx23evk_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer mx23evk_timer = {
-	.init	= mx23evk_timer_init,
-};
-
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &mx23evk_timer,
-	.init_machine	= mx23evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
deleted file mode 100644
index dafd48e86c8c..000000000000
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-
-#include "devices-mx28.h"
-
-#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED	MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
-
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-	/* phy power line */
-	MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
-	/* phy reset line */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-	/* transceiver power control */
-	MX28_PAD_SSP1_CMD__GPIO_2_13,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
-	MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_SSP1_SCK__GPIO_2_12 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM3__GPIO_3_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_I2C0_SDA__I2C0_SDA |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = MX28EVK_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
-	.leds = mx28evk_leds,
-	.num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("enet_out", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
-	mdelay(1);
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init mx28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code Freescale OUI (00:04:9f) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0x00;
-		mx28_fec_pdata[i].mac[1] = 0x04;
-		mx28_fec_pdata[i].mac[2] = 0x9f;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
-	if (flexcan0_en || flexcan1_en)
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
-	else
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
-	flexcan0_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
-	flexcan1_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static const struct flexcan_platform_data
-		mx28evk_flexcan_pdata[] __initconst = {
-	{
-		.transceiver_switch = mx28evk_flexcan0_switch,
-	}, {
-		.transceiver_switch = mx28evk_flexcan1_switch,
-	}
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
-	{
-		.name		= "Seiko-43WVF1G",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 29851, /* picosecond (33.5 MHz) */
-		.left_margin	= 89,
-		.right_margin	= 164,
-		.upper_margin	= 23,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx28evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("sgtl5000", 0x0a),
-	},
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = mx28evk_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mx28evk_vdd_pdata,
-	},
-};
-static void __init mx28evk_add_regulators(void)
-{
-	platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-
-static const struct gpio mx28evk_gpios[] __initconst = {
-	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
-	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
-	{ MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
-	{ MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
-	{ MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
-	{ MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-
-static const struct mxs_saif_platform_data
-			mx28evk_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static void __init mx28evk_init(void)
-{
-	int ret;
-
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (mx28evk_fec_get_mac())
-		pr_warn("%s: failed on fec mac setup\n", __func__);
-
-	ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
-	if (ret)
-		pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-
-	mx28evk_fec_reset();
-	mx28_add_fec(0, &mx28_fec_pdata[0]);
-	mx28_add_fec(1, &mx28_fec_pdata[1]);
-
-	mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
-	mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-
-	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, mxs_i2c0_board_info,
-				ARRAY_SIZE(mxs_i2c0_board_info));
-
-	mx28evk_add_regulators();
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
-			NULL, 0);
-
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-
-	mx28_add_rtc_stmp3xxx();
-
-	gpio_led_register_device(0, &mx28evk_led_data);
-}
-
-static void __init mx28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer mx28evk_timer = {
-	.init	= mx28evk_timer_init,
-};
-
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &mx28evk_timer,
-	.init_machine	= mx28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 8dabfe81d07c..4748ec551a68 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -12,18 +12,21 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/init.h>
-#include <linux/irqdomain.h>
 #include <linux/micrel_phy.h>
 #include <linux/mxsfb.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/mxs.h>
 
 static struct fb_videomode mx23evk_video_modes[] = {
 	{
@@ -99,43 +102,43 @@ static struct fb_videomode apx4devkit_video_modes[] = {
 
 static struct mxsfb_platform_data mxsfb_pdata __initdata;
 
-static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
-	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
-	{ /* sentinel */ }
-};
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
 
-static int __init mxs_icoll_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
+static int flexcan0_en, flexcan1_en;
 
-	return 0;
+static void mx28evk_flexcan_switch(void)
+{
+	if (flexcan0_en || flexcan1_en)
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+	else
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
 }
 
-static int __init mxs_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
+static void mx28evk_flexcan0_switch(int enable)
 {
-	static int gpio_irq_base = MXS_GPIO_IRQ_START;
-
-	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-	gpio_irq_base += 32;
+	flexcan0_en = enable;
+	mx28evk_flexcan_switch();
+}
 
-	return 0;
+static void mx28evk_flexcan1_switch(int enable)
+{
+	flexcan1_en = enable;
+	mx28evk_flexcan_switch();
 }
 
-static const struct of_device_id mxs_irq_match[] __initconst = {
-	{ .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, },
-	{ .compatible = "fsl,mxs-gpio", .data = mxs_gpio_add_irq_domain, },
+static struct flexcan_platform_data flexcan_pdata[2];
+
+static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
 	{ /* sentinel */ }
 };
 
-static void __init mxs_dt_init_irq(void)
-{
-	icoll_init_irq();
-	of_irq_init(mxs_irq_match);
-}
-
 static void __init imx23_timer_init(void)
 {
 	mx23_clocks_init();
@@ -237,13 +240,21 @@ static void __init imx28_evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
 
-static void __init m28evk_init(void)
+static void __init imx28_evk_post_init(void)
 {
-	enable_clk_enet_out();
-	update_fec_mac_prop(OUI_DENX);
+	if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+			      "flexcan-switch")) {
+		flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+		flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+	}
+}
 
+static void __init m28evk_init(void)
+{
 	mxsfb_pdata.mode_list = m28evk_video_modes;
 	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
 	mxsfb_pdata.default_bpp = 16;
@@ -261,7 +272,7 @@ static void __init apx4devkit_init(void)
 	enable_clk_enet_out();
 
 	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
+		phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
 					   apx4devkit_phy_fixup);
 
 	mxsfb_pdata.mode_list = apx4devkit_video_modes;
@@ -270,6 +281,80 @@ static void __init apx4devkit_init(void)
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }
 
+#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
+
+#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
+
+static const struct gpio tx28_gpios[] __initconst = {
+	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+
+static void __init tx28_post_init(void)
+{
+	struct device_node *np;
+	struct platform_device *pdev;
+	struct pinctrl *pctl;
+	int ret;
+
+	enable_clk_enet_out();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		pr_err("%s: failed to find fec device\n", __func__);
+		return;
+	}
+
+	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+	if (IS_ERR(pctl)) {
+		pr_err("%s: failed to get pinctrl state\n", __func__);
+		return;
+	}
+
+	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+	if (ret) {
+		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+		return;
+	}
+
+	/* Power up fec phy */
+	gpio_set_value(TX28_FEC_PHY_POWER, 1);
+	msleep(26); /* 25ms according to data sheet */
+
+	/* Mode strap pins */
+	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+
+	udelay(100); /* minimum assertion time for nRST */
+
+	/* Deasserting FEC PHY RESET */
+	gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+	pinctrl_put(pctl);
+}
+
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
@@ -283,29 +368,28 @@ static void __init mxs_machine_init(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     mxs_auxdata_lookup, NULL);
+
+	if (of_machine_is_compatible("karo,tx28"))
+		tx28_post_init();
+
+	if (of_machine_is_compatible("fsl,imx28-evk"))
+		imx28_evk_post_init();
 }
 
 static const char *imx23_dt_compat[] __initdata = {
-	"fsl,imx23-evk",
-	"fsl,stmp378x_devb"
-	"olimex,imx23-olinuxino",
 	"fsl,imx23",
 	NULL,
 };
 
 static const char *imx28_dt_compat[] __initdata = {
-	"bluegiga,apx4devkit",
-	"crystalfontz,cfa10036",
-	"denx,m28evk",
-	"fsl,imx28-evk",
-	"karo,tx28",
 	"fsl,imx28",
 	NULL,
 };
 
 DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
 	.map_io		= mx23_map_io,
-	.init_irq	= mxs_dt_init_irq,
+	.init_irq	= icoll_init_irq,
+	.handle_irq	= icoll_handle_irq,
 	.timer		= &imx23_timer,
 	.init_machine	= mxs_machine_init,
 	.dt_compat	= imx23_dt_compat,
@@ -314,7 +398,8 @@ MACHINE_END
 
 DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
 	.map_io		= mx28_map_io,
-	.init_irq	= mxs_dt_init_irq,
+	.init_irq	= icoll_init_irq,
+	.handle_irq	= icoll_handle_irq,
 	.timer		= &imx28_timer,
 	.init_machine	= mxs_machine_init,
 	.dt_compat	= imx28_dt_compat,
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
deleted file mode 100644
index 6548965e4a76..000000000000
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
-	/* duart (extended setup missing in old boardcode, too */
-	MX23_PAD_PWM0__DUART_RX,
-	MX23_PAD_PWM1__DUART_TX,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
-	MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
-	.wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-	{
-		.modalias       = "enc28j60",
-		.max_speed_hz   = 6 * 1000 * 1000,
-		.bus_num	= 1,
-		.chip_select    = 0,
-		.platform_data  = NULL,
-	},
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
-	int ret;
-
-	mx23_soc_init();
-
-	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
-			ARRAY_SIZE(stmp378x_dvb_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-	mx23_add_rtc_stmp3xxx();
-
-	/* power on mmc slot */
-	ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
-		GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
-	if (ret)
-		pr_warn("could not power mmc (%d)\n", ret);
-
-	mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
-	.init	= stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &stmp378x_dvb_timer,
-	.init_machine	= stmp378x_dvb_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
deleted file mode 100644
index 8837029de1a4..000000000000
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-#include "module-tx28.h"
-
-#define TX28_STK5_GPIO_LED		MXS_GPIO_NR(4, 10)
-
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
-	/* LED */
-	MX28_PAD_ENET0_RXD3__GPIO_4_10 |
-		MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-
-	/* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
-	MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
-	MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
-	MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
-	MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
-	MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
-	MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
-	MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
-	MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
-	MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
-	MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
-	MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
-	MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
-	MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
-	MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
-	MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
-	MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
-	MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
-	MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
-	MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
-	MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
-	MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
-	MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
-	MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
-	MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
-	MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
-	MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
-	MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-
-	/* UART1 */
-	MX28_PAD_AUART0_CTS__DUART_RX,
-	MX28_PAD_AUART0_RTS__DUART_TX,
-	MX28_PAD_AUART0_TX__DUART_RTS,
-	MX28_PAD_AUART0_RX__DUART_CTS,
-
-	/* UART2 */
-	MX28_PAD_AUART1_RX__AUART1_RX,
-	MX28_PAD_AUART1_TX__AUART1_TX,
-	MX28_PAD_AUART1_RTS__AUART1_RTS,
-	MX28_PAD_AUART1_CTS__AUART1_CTS,
-
-	/* CAN */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* TSC2007 */
-	MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-
-	/* MMC0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = TX28_STK5_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
-	.leds = tx28_stk5v3_leds,
-	.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-
-static struct spi_board_info tx28_spi_board_info[] = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
-       .wp_gpio = -EINVAL,
-       .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static void __init tx28_stk5v3_init(void)
-{
-	mx28_soc_init();
-
-	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
-			ARRAY_SIZE(tx28_stk5v3_pads));
-
-	mx28_add_duart(); /* UART1 */
-	mx28_add_auart(1); /* UART2 */
-
-	tx28_add_fec0();
-	/* spi via ssp will be added when available */
-	spi_register_board_info(tx28_spi_board_info,
-			ARRAY_SIZE(tx28_spi_board_info));
-	gpio_led_register_device(0, &tx28_stk5v3_led_data);
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
-	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
-	mx28_add_rtc_stmp3xxx();
-}
-
-static void __init tx28_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer tx28_timer = {
-	.init = tx28_timer_init,
-};
-
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
-	.map_io = mx28_map_io,
-	.init_irq = mx28_init_irq,
-	.timer = &tx28_timer,
-	.init_machine = tx28_stk5v3_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index dccb67a9e7c4..a4294aa9f301 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -13,14 +13,11 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/mx23.h>
 #include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
 
 /*
  * Define the MX23 memory map.
@@ -48,43 +45,7 @@ void __init mx23_map_io(void)
 	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
 }
 
-void __init mx23_init_irq(void)
-{
-	icoll_init_irq();
-}
-
 void __init mx28_map_io(void)
 {
 	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
 }
-
-void __init mx28_init_irq(void)
-{
-	icoll_init_irq();
-}
-
-void __init mx23_soc_init(void)
-{
-	pinctrl_provide_dummies();
-
-	mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
-	mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
-	mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
-	mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
-	mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-}
-
-void __init mx28_soc_init(void)
-{
-	pinctrl_provide_dummies();
-
-	mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
-	mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
-	mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
-	mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
-	mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
-	mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
-	mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-}
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
deleted file mode 100644
index 0f71f82101cc..000000000000
--- a/arch/arm/mach-mxs/module-tx28.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-
-#include "module-tx28.h"
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
-	/* PHY POWER */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* PHY RESET */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* Mode strap pins 0-2 */
-	MX28_PAD_ENET0_RXD0__GPIO_4_3 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RXD1__GPIO_4_4 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	/* nINT */
-	MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-
-	MX28_PAD_ENET0_MDC__GPIO_4_0,
-	MX28_PAD_ENET0_MDIO__GPIO_4_1,
-	MX28_PAD_ENET0_TX_EN__GPIO_4_6,
-	MX28_PAD_ENET0_TXD0__GPIO_4_7,
-	MX28_PAD_ENET0_TXD1__GPIO_4_8,
-	MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
-	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN,
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-
-static const struct fec_platform_data tx28_fec0_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct fec_platform_data tx28_fec1_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-int __init tx28_add_fec0(void)
-{
-	int i, ret;
-
-	pr_debug("%s: Switching FEC PHY power off\n", __func__);
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
-			ARRAY_SIZE(tx28_fec_gpio_pads));
-	for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		ret = gpio_request(gpio, "FEC");
-		if (ret) {
-			pr_err("Failed to request GPIO_%d_%d: %d\n",
-				PAD_BANK(tx28_fec_gpio_pads[i]),
-				PAD_PIN(tx28_fec_gpio_pads[i]), ret);
-			goto free_gpios;
-		}
-		ret = gpio_direction_output(gpio, 0);
-		if (ret) {
-			pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
-					gpio / 32 + 1, gpio % 32, ret);
-			goto free_gpios;
-		}
-	}
-
-	/* Power up fec phy */
-	pr_debug("%s: Switching FEC PHY power on\n", __func__);
-	ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
-	if (ret) {
-		pr_err("Failed to power on PHY: %d\n", ret);
-		goto free_gpios;
-	}
-	mdelay(26); /* 25ms according to data sheet */
-
-	/* nINT */
-	gpio_direction_input(MXS_GPIO_NR(4, 5));
-	/* Mode strap pins */
-	gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
-			ARRAY_SIZE(tx28_fec0_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		goto free_gpios;
-	}
-	pr_debug("%s: Registering FEC0 device\n", __func__);
-	mx28_add_fec(0, &tx28_fec0_data);
-	return 0;
-
-free_gpios:
-	while (--i >= 0) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-int __init tx28_add_fec1(void)
-{
-	int ret;
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
-			ARRAY_SIZE(tx28_fec1_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		return ret;
-	}
-	pr_debug("%s: Registering FEC1 device\n", __func__);
-	mx28_add_fec(1, &tx28_fec1_data);
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
deleted file mode 100644
index 8ed425457d30..000000000000
--- a/arch/arm/mach-mxs/module-tx28.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- *   Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 02d36de9c4e8..7c3792613392 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -25,6 +25,8 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 #include <mach/mxs.h>
@@ -244,9 +246,17 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxs_timer_init(int irq)
+void __init mxs_timer_init(void)
 {
+	struct device_node *np;
 	struct clk *timer_clk;
+	int irq;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,timrot");
+	if (!np) {
+		pr_err("%s: failed find timrot node\n", __func__);
+		return;
+	}
 
 	timer_clk = clk_get_sys("timrot", NULL);
 	if (IS_ERR(timer_clk)) {
@@ -295,5 +305,6 @@ void __init mxs_timer_init(int irq)
 	mxs_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
+	irq = irq_of_parse_and_map(np, 0);
 	setup_irq(irq, &mxs_timer_irq);
 }
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 180ea899a48a..8b781ff7c9e9 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 58009e29b20e..b26dbce334f2 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 122e99826ef6..257382efafa0 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
-#include <mach/eth.h>
+#include <linux/platform_data/eth-netx.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index f4535a7dadf5..bfa1eab91f41 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
@@ -33,8 +34,9 @@
 
 #include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
+#include <plat/pincfg.h>
 
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <mach/fsmc.h>
 
 #include "cpu-8815.h"
@@ -112,8 +114,7 @@ static struct mtd_partition nhk8815_partitions[] = {
 static struct nomadik_nand_platform_data nhk8815_nand_data = {
 	.parts		= nhk8815_partitions,
 	.nparts		= ARRAY_SIZE(nhk8815_partitions),
-	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
-			| NAND_NO_READRDY,
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING,
 	.init		= nhk8815_nand_init,
 };
 
@@ -291,8 +292,42 @@ static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
 	},
 };
 
+static unsigned long out_low[] = { PIN_OUTPUT_LOW };
+static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
+static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
+static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
+
+static struct pinctrl_map __initdata nhk8815_pinmap[] = {
+	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
+	/* Hog in MMC/SD card mux */
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
+	/* MCCLK */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
+	/* MCCMD */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
+	/* MCCMDDIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
+	/* MCDAT3-0 */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
+	/* MCDAT0DIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
+	/* MCDAT31DIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
+	/* MCMSFBCLK */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
+	/* CD input GPIO */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
+	/* CD bias drive */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
+};
+
 static void __init nhk8815_platform_init(void)
 {
+	pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
 	cpu8815_platform_init();
 	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 6fd8e46567a4..b617eaed0ce5 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -83,6 +83,18 @@ void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
 	}
 }
 
+static inline void
+cpu8815_add_pinctrl(struct device *parent, const char *name)
+{
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = name,
+		.id = -1,
+	};
+
+	platform_device_register_full(&pdevinfo);
+}
+
 static int __init cpu8815_init(void)
 {
 	struct nmk_gpio_platform_data pdata = {
@@ -91,6 +103,7 @@ static int __init cpu8815_init(void)
 
 	cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
 			  IRQ_GPIO0, &pdata);
+	cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
 	amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
 	amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
 	return 0;
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
deleted file mode 100644
index efdde0ae0a4f..000000000000
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
index 6316dba3bfc8..02035e459f50 100644
--- a/arch/arm/mach-nomadik/include/mach/hardware.h
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -30,7 +30,7 @@
 			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
 
 /* used in asm code, so no casts */
-#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
 
 /*
  *   Base address defination for Nomadik Onchip Logic Block
diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/arch/arm/mach-nomadik/include/mach/nand.h
deleted file mode 100644
index c3c8254c22a5..000000000000
--- a/arch/arm/mach-nomadik/include/mach/nand.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
-	struct mtd_partition *parts;
-	int nparts;
-	int options;
-	int (*init) (void);
-	int (*exit) (void);
-};
-
-#define NAND_IO_DATA	0x40000000
-#define NAND_IO_CMD	0x40800000
-#define NAND_IO_ADDR	0x41000000
-
-#endif				/* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index 071003bc8456..7d4687e9cbdf 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -27,10 +27,10 @@
 struct amba_device;
 #include <linux/amba/serial.h>
 
-#define NOMADIK_UART_DR		0x101FB000
-#define NOMADIK_UART_LCRH	0x101FB02c
-#define NOMADIK_UART_CR		0x101FB030
-#define NOMADIK_UART_FR		0x101FB018
+#define NOMADIK_UART_DR		(void __iomem *)0x101FB000
+#define NOMADIK_UART_LCRH	(void __iomem *)0x101FB02c
+#define NOMADIK_UART_CR		(void __iomem *)0x101FB030
+#define NOMADIK_UART_FR		(void __iomem *)0x101FB018
 
 static void putc(const char c)
 {
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 398e9e53e189..cd169c386161 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
 
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
-obj-$(CONFIG_LEDS)			+= $(led-y)
-
 ifneq ($(CONFIG_FB_OMAP),)
 obj-y += lcd_dma.o
 endif
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index a051cb8ae57f..3d1e1c250a1a 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -16,8 +16,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
+#include <mach/irqs.h>
 #include <mach/ams-delta-fiq.h>
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 68e8e5654c0a..f12a12af3523 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -19,7 +19,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
 
 #include <asm/fiq.h>
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c53469802c03..9518bf5996dc 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <media/soc_camera.h>
 
@@ -34,10 +35,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board-ams-delta.h>
-#include <plat/keypad.h>
-#include <plat/mux.h>
-#include <plat/board.h>
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/mux.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 6872f3fd400f..4b6de70c47a6 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -28,11 +28,10 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
 #include <plat/fpga.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6ec385e2b98e..4ec579fdd366 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -22,8 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
-#include <plat/board.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 
@@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif
 
-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
-
 static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -76,8 +72,6 @@ static void __init omap_generic_init(void)
 	}
 #endif
 
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 44a4ab195fbc..376f7f29ef77 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -31,17 +31,19 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-#include <plat/flash.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -306,12 +308,39 @@ static struct platform_device h2_irda_device = {
 	.resource	= h2_irda_resources,
 };
 
+static struct gpio_led h2_gpio_led_pins[] = {
+	{
+		.name		= "h2:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h2:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+	.leds		= h2_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h2_gpio_led_data,
+	},
+};
+
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
 	&h2_nand_device,
 	&h2_smc91x_device,
 	&h2_irda_device,
 	&h2_kp_device,
+	&h2_gpio_leds,
 };
 
 static void __init h2_init_smc91x(void)
@@ -406,6 +435,10 @@ static void __init h2_init(void)
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	h2_smc91x_resources[1].start = gpio_to_irq(0);
 	h2_smc91x_resources[1].end = gpio_to_irq(0);
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 86cb5a04a404..ededdb7ef28c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,6 +31,8 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -38,11 +40,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <plat/dma.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -324,6 +326,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpio_led h3_gpio_led_pins[] = {
+	{
+		.name		= "h3:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h3:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+	.leds		= h3_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3_gpio_led_data,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -331,6 +359,7 @@ static struct platform_device *devices[] __initdata = {
 	&intlat_device,
 	&h3_kp_device,
 	&h3_lcd_device,
+	&h3_gpio_leds,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -398,6 +427,10 @@ static void __init h3_init(void)
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	smc91x_resources[1].start = gpio_to_irq(40);
 	smc91x_resources[1].end = gpio_to_irq(40);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index b3f6e943e661..87ab2086ef96 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -37,13 +37,12 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/omap7xx.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
+#include <mach/omap7xx.h>
 #include <plat/mmc.h>
 
 #include <mach/irqs.h>
@@ -476,8 +475,7 @@ static void __init htcherald_lcd_init(void)
 				break;
 		}
 		if (!tries)
-			printk(KERN_WARNING "Timeout waiting for end of frame "
-			       "-- LCD may not be available\n");
+			pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
 
 		/* turn off DMA */
 		reg = omap_readw(OMAP_DMA_LCD_CCR);
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f21c2966daad..db5f7d2976e7 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -31,11 +31,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
 #include <plat/fpga.h>
 #include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <plat/mmc.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 2c0ca8fc3380..7d5c06d6a52a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -21,14 +21,14 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/platform_data/lcd-mipid.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/lcd_mipid.h>
+#include <mach/mux.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 8784705edb60..5973945a8741 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,13 +39,15 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>
@@ -302,7 +304,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,
@@ -380,10 +382,37 @@ static struct platform_device osk5912_lcd_device = {
 	.id		= -1,
 };
 
+static struct gpio_led mistral_gpio_led_pins[] = {
+	{
+		.name		= "mistral:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "mistral:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+	.leds		= mistral_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mistral_gpio_led_data,
+	},
+};
+
 static struct platform_device *mistral_devices[] __initdata = {
 	&osk5912_kp_device,
 	&mistral_bl_device,
 	&osk5912_lcd_device,
+	&mistral_gpio_leds,
 };
 
 static int mistral_get_pendown_state(void)
@@ -508,6 +537,12 @@ static void __init osk_mistral_init(void)
 	if (gpio_request(2, "lcd_pwr") == 0)
 		gpio_direction_output(2, 1);
 
+	/*
+	 * GPIO based LEDs
+	 */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	i2c_register_board_info(1, mistral_i2c_board_info,
 			ARRAY_SIZE(mistral_i2c_board_info));
 
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 26bcb9defcdc..1c578d58923a 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -28,18 +28,18 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 4d099446dfa8..97158095083c 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -27,19 +27,19 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/led.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 355980321c2d..e311032e7eeb 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -30,18 +30,18 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 703d55ecffe2..198b05417bfc 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -22,17 +22,16 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
-#include <plat/flash.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index b59f78850e69..5932d56e17bf 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 #include <plat/mmc.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8c665bd16ac2..13bf2cc56814 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -28,19 +28,18 @@
 #include <linux/errno.h>
 #include <linux/export.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
-#include <plat/irda.h>
+#include <mach/irda.h>
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 3497769eb353..ad75e3411d46 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -31,11 +31,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board-voiceblue.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/board-voiceblue.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_board_config_kernel voiceblue_config[] = {
-};
-
 #define MACHINE_PANICED		1
 #define MACHINE_REBOOTING	2
 #define MACHINE_REBOOT		4
@@ -275,8 +271,6 @@ static void __init voiceblue_init(void)
 	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
 	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_board_config = voiceblue_config;
-	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
 	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index a9ee06b6cb42..638f4070fc70 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -587,8 +587,8 @@ void omap1_clk_disable_unused(struct clk *clk)
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
 	if (clk->enable_reg == DSP_IDLECT2) {
-		printk(KERN_INFO "Skipping reset check for DSP domain "
-		       "clock \"%s\"\n", clk->name);
+		pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
+			clk->name);
 		return;
 	}
 
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c007d80dfb62..9b45f4b0ee22 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -25,7 +25,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/clkdev_omap.h>
-#include <plat/board.h>
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
 
 #include <mach/hardware.h>
@@ -776,11 +775,10 @@ static struct clk_functions omap1_clk_functions = {
 
 static void __init omap1_show_rates(void)
 {
-	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
-			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		  ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		  ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		  arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 }
 
 u32 cpu_mask;
@@ -788,7 +786,6 @@ u32 cpu_mask;
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
-	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;
 
@@ -837,19 +834,13 @@ int __init omap1_clk_init(void)
 	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
 	ck_ref_p = clk_get(NULL, "ck_ref");
 
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap15xx())
-			crystal_type = info->system_clock_type;
-	}
-
 	if (cpu_is_omap7xx())
 		ck_ref.rate = 13000000;
 	if (cpu_is_omap16xx() && crystal_type == 2)
 		ck_ref.rate = 19200000;
 
-	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
-		"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
 		omap_readw(ARM_CKCTL));
 
 	/* We want to be in syncronous scalable mode */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index fa1fa4deb6aa..726c02c9c0cd 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -20,12 +20,11 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/mmc.h>
-#include <plat/omap7xx.h>
 
+#include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>
 
@@ -358,6 +357,33 @@ static inline void omap_init_uwire(void) {}
 #endif
 
 
+#define OMAP1_RNG_BASE		0xfffe5000
+
+static struct resource omap1_rng_resources[] = {
+	{
+		.start		= OMAP1_RNG_BASE,
+		.end		= OMAP1_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap1_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap1_rng_resources),
+	.resource	= omap1_rng_resources,
+};
+
+static void omap1_init_rng(void)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	(void) platform_device_register(&omap1_rng_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -396,6 +422,7 @@ static int __init omap1_init_devices(void)
 	omap_init_spi100k();
 	omap_init_sti();
 	omap_init_uwire();
+	omap1_init_rng();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 3ef7d52316b4..29007fef84cd 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -27,7 +27,8 @@
 
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/irqs.h>
+
+#include <mach/irqs.h>
 
 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
@@ -330,8 +331,9 @@ static int __init omap1_system_dma_init(void)
 	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
 					(d->lch_count), GFP_KERNEL);
 	if (!d->chan) {
-		dev_err(&pdev->dev, "%s: Memory allocation failed"
-					"for d->chan!!!\n", __func__);
+		dev_err(&pdev->dev,
+			"%s: Memory allocation failed for d->chan!\n",
+			__func__);
 		goto exit_release_d;
 	}
 
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 401eb3c080c2..73ae6169aa4a 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -11,7 +11,7 @@
 #include <linux/mtd/map.h>
 
 #include <plat/tc.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index ebef15e5e7b7..98e6f39224a4 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 2a48cd2e1754..33f419236b17 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index acf12b73eace..958ce9acee95 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5446c9912641..a0551a6d7451 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -20,7 +20,7 @@
  */
 
 #include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
 
 void __init omap1_i2c_mux_pins(int bus_id)
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 23eed0035ed8..adb5e7649659 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,8 +14,6 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <plat/irqs.h>
-
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
  * IRQ12, described as reserved, has been selected.
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
index ad6f865d1f16..ad6f865d1f16 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/mach-omap1/include/mach/board-sx1.h
index 355adbdaae33..355adbdaae33 100644
--- a/arch/arm/plat-omap/include/plat/board-sx1.h
+++ b/arch/arm/mach-omap1/include/mach/board-sx1.h
diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
index 27916b210f57..27916b210f57 100644
--- a/arch/arm/plat-omap/include/plat/board-voiceblue.h
+++ b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/mach-omap1/include/mach/flash.h
index 0d88499b79e9..0d88499b79e9 100644
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ b/arch/arm/mach-omap1/include/mach/flash.h
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
index e737706a8fe1..ebf86c0f4f46 100644
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap1/include/mach/gpio.h
  */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 01e35fa106b8..84248d250adb 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -1,11 +1,46 @@
 /*
  * arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
 
+#include <asm/sizes.h>
 #ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
@@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void)
 			? 0 : OMAP_CS3_PHYS;
 }
 
+#endif	/* ifndef __ASSEMBLER__ */
+
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
 #endif
-#endif
 
-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/mach-omap1/include/mach/irda.h
index 40f60339d1c6..40f60339d1c6 100644
--- a/arch/arm/plat-omap/include/plat/irda.h
+++ b/arch/arm/mach-omap1/include/mach/irda.h
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
index 9292fdc1cb0b..729992d7d26a 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -1,5 +1,268 @@
 /*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
  */
 
-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS			OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
index 323948959200..323948959200 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/mach-omap1/include/mach/mux.h
diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index d24004668138..8fe05d6137c0 100644
--- a/arch/arm/plat-omap/include/plat/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap1510.h
- *
+/*
  * Hardware definitions for TI OMAP1510 processor.
  *
  * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h
index e69e1d857b45..cd1c724869c7 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap16xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap16xx.h
- *
+/*
  * Hardware definitions for TI OMAP1610/5912/1710 processors.
  *
  * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h
index 48e4757e1e30..63da994bc609 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap7xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap7xx.h
- *
+/*
  * Hardware definitions for TI OMAP7XX processor.
  *
  * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h
deleted file mode 100644
index 80a371c06e59..000000000000
--- a/arch/arm/mach-omap1/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6c95a59f0f16..6a5baab1f4cb 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -16,7 +16,7 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 5769c71815b2..ed42628611bc 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -113,8 +113,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
 	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA virtual resolution is not supported "
-				"in 1510 mode\n");
+		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
 		BUG();
 	}
 	lcd_dma.vxres = vxres;
@@ -437,8 +436,7 @@ static int __init omap_init_lcd_dma(void)
 	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
 			"LCD DMA", NULL);
 	if (r != 0)
-		printk(KERN_ERR "unable to request IRQ for LCD DMA "
-			       "(error %d)\n", r);
+		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
 
 	return r;
 }
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index f6b14a14a957..000000000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	static struct h2p2_dbg_fpga __iomem *fpga;
-	static u16 led_state, hw_led_state;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (!fpga)
-			fpga = ioremap(H2P2_DBG_FPGA_START,
-						H2P2_DBG_FPGA_SIZE);
-		if (fpga) {
-			led_state |= LED_STATE_ENABLED;
-			__raw_writew(~0, &fpga->leds);
-		}
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (! machine_is_omap_perseus2()) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		if (evt == led_halted) {
-			iounmap(fpga);
-			fpga = NULL;
-		}
-
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (machine_is_omap_perseus2())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
-
-	case led_idle_end:
-		if (machine_is_omap_perseus2())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 3a066ee8d02c..000000000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= 0;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= 0;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~0;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 936ed426b84f..000000000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	(1 << 0)
-#define LED_STATE_CLAIMED	(1 << 1)
-static u8 led_state;
-
-#define	TIMER_LED		(1 << 3)	/* Mistral board */
-#define	IDLE_LED		(1 << 4)	/* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context.  This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
-	int	red = 0;
-	int	green = 0;
-
-	if (hw_led_state & TIMER_LED)
-		red = 1;
-	else if (hw_led_state & IDLE_LED)
-		green = 1;
-	/* else both sides are disabled */
-
-	gpio_set_value(GPIO_LED_GREEN, green);
-	gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
-	unsigned long	flags;
-	u16		leds;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	leds = hw_led_state;
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_halted:
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-	case led_timer:
-		hw_led_state ^= TIMER_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_start:	/* idle == off */
-		hw_led_state &= ~IDLE_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_end:
-		hw_led_state |= IDLE_LED;
-		mistral_setled();
-		break;
-
-#endif	/* CONFIG_OMAP_OSK_MISTRAL */
-
-	default:
-		break;
-	}
-
-	leds ^= hw_led_state;
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index ae6dd93b8ddc..000000000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (machine_is_omap_innovator())
-		leds_event = innovator_leds_event;
-
-	else if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2())
-		leds_event = h2p2_dbg_leds_event;
-
-	else if (machine_is_omap_osk())
-		leds_event = osk_leds_event;
-
-	else
-		return -1;
-
-	if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-			|| machine_is_omap_osk()
-#endif
-			) {
-
-		/* LED1/LED2 pins can be used as GPIO (as done here), or by
-		 * the LPG (works even in deep sleep!), to drive a bicolor
-		 * LED on the H2 sample board, and another on the H2/P2
-		 * "surfer" expansion board.
-		 *
-		 * The same pins drive a LED on the OSK Mistral board, but
-		 * that's a different kind of LED (just one color at a time).
-		 */
-		omap_cfg_reg(P18_1610_GPIO3);
-		if (gpio_request(3, "LED red") == 0)
-			gpio_direction_output(3, 1);
-		else
-			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
-		omap_cfg_reg(MPUIO4);
-		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
-			gpio_direction_output(OMAP_MPUIO(4), 1);
-		else
-			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
-	}
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fedc376c..000000000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index adf00975b9bb..bdc2e7541adb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -20,9 +20,9 @@
 #include <linux/slab.h>
 
 #include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e9cc52d4cb28..667ce5027f63 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -29,7 +29,7 @@
 
 #include <mach/hardware.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -451,6 +451,56 @@ static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 #endif
 }
 
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
+
+	return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+	struct pin_config *reg;
+
+	if (!cpu_class_is_omap1()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
+
+	if (index >= mux_cfg->size) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, mux_cfg->size);
+		dump_stack();
+		return -ENODEV;
+	}
+
+	reg = &mux_cfg->pins[index];
+
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
+
+	return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
 int __init omap1_mux_init(void)
 {
 	if (cpu_is_omap7xx()) {
@@ -468,4 +518,8 @@ int __init omap1_mux_init(void)
 	return omap_mux_register(&arch_mux_cfg);
 }
 
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x)	do {} while(0)
+#endif	/* CONFIG_OMAP_MUX */
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index b2560d32b3a0..47ec16155483 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6809c9e56c93..b9d6834af835 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,8 +22,7 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4062480bfec7..4d4816fd6fc9 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index aa81593db1af..cdeb9d3ef640 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -141,7 +141,7 @@ static int __init omap1_dm_timer_init(void)
 
 		pdata->set_timer_src = omap1_dm_timer_set_src;
 		pdata->timer_capability = OMAP_TIMER_ALWON |
-				OMAP_TIMER_NEEDS_RESET;
+				OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ;
 
 		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
 		if (ret) {
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index eae49c3980c9..74529549130c 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,7 +46,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 65f88176fba8..84267edd9421 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -26,7 +26,7 @@
 
 #include <asm/irq.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd2db025f778..a6219eaf1f68 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -18,12 +18,16 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
 	select HIGHMEM
+	select PINCTRL
 	help
 	  Compile a kernel suitable for booting most boards
 
 config SOC_HAS_OMAP2_SDRC
 	bool "OMAP2 SDRAM Controller support"
 
+config SOC_HAS_REALTIME_COUNTER
+	bool "Real time free running counter"
+
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	depends on ARCH_OMAP2PLUS
@@ -44,6 +48,7 @@ config ARCH_OMAP3
 	select ARM_CPU_SUSPEND if PM
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
+	select OMAP_INTERCONNECT
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -62,13 +67,17 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+	select OMAP_INTERCONNECT
 
 config SOC_OMAP5
 	bool "TI OMAP5"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
+	select ARM_CPU_SUSPEND if PM
+	select SOC_HAS_REALTIME_COUNTER
+	select ARM_ARCH_TIMER
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -231,10 +240,11 @@ config MACH_OMAP3_PANDORA
 	select OMAP_PACKAGE_CBB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
-config MACH_OMAP3_TOUCHBOOK
+config MACH_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
 	default y
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f6a24b3f9c4f..fe40d9e488c9 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,36 +4,30 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
+	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
 
-omap-2-3-common				= irq.o
-hwmod-common				= omap_hwmod.o \
-					  omap_hwmod_common_data.o
-clock-common				= clock.o clock_common_data.o \
-					  clkt_dpll.o clkt_clksel.o
-secure-common				= omap-smc.o omap-secure.o
+# INTCPS IP block support - XXX should be moved to drivers/
+obj-$(CONFIG_ARCH_OMAP2)		+= irq.o
+obj-$(CONFIG_ARCH_OMAP3)		+= irq.o
+obj-$(CONFIG_SOC_AM33XX)		+= irq.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
+# Secure monitor API support
+obj-$(CONFIG_ARCH_OMAP3)		+= omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap-smc.o omap-secure.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap-smc.o omap-secure.o
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
 endif
 
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
+obj-$(CONFIG_TWL4030_CORE)		+= omap_twl.o
 
 # SMP support ONLY available for OMAP4
 
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-omap-4-5-common				=  omap4-common.o omap-wakeupgen.o \
-					   sleep44xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common)
-obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common)
+obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap4-common.o omap-wakeupgen.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -58,6 +52,7 @@ obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # OPP table initialization
 ifeq ($(CONFIG_PM_OPP),y)
@@ -68,15 +63,15 @@ endif
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4)		+= sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o sleep44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -88,92 +83,76 @@ endif
 endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3)                += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4)                += cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cpuidle44xx.o
 endif
 
 # PRCM
-omap-prcm-4-5-common			=  prcm.o cminst44xx.o cm44xx.o \
-					   prcm_mpu44xx.o prminst44xx.o \
-					   vc44xx_data.o vp44xx_data.o
-obj-y					+= prm_common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y					+= prcm.o prm_common.o
+obj-$(CONFIG_ARCH_OMAP2)		+= cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= prcm.o prm33xx.o cm33xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common) prm44xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
+omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
+					   prcm_mpu44xx.o prminst44xx.o \
+					   vc44xx_data.o vp44xx_data.o \
+					   prm44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
-voltagedomain-common			:= voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
+obj-y					+= voltage.o vc.o vp.o
 obj-$(CONFIG_ARCH_OMAP2)		+= voltagedomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
-obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX)		+= voltagedomains33xx_data.o
 
 # OMAP powerdomain framework
-powerdomain-common			+= powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common)
+obj-y					+= powerdomain.o powerdomain-common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_data.o
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= powerdomain44xx.o
 
 # PRCM clockdomain control
-clockdomain-common			+= clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(clockdomain-common)
+obj-y					+= clockdomain.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= clockdomain44xx.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_sys.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
+obj-y					+= clock.o clock_common_data.o \
+					   clkt_dpll.o clkt_clksel.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o clkt2xxx_sys.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_apll.o clkt2xxx_osc.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)		+= clock33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
+obj-$(CONFIG_SOC_AM33XX)		+= dpll3xxx.o clock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
@@ -181,6 +160,7 @@ obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
+obj-y					+= omap_hwmod_common_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_interconnect_data.o
@@ -194,15 +174,12 @@ obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
-
-# L3 interconnect
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap_l3_noc.o
+obj-$(CONFIG_HW_PERF_EVENTS)		+= pmu.o
 
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
@@ -229,10 +206,10 @@ obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000)		+= board-devkit8000.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)	+= board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)	+= board-omap3logic.o
 obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
@@ -255,7 +232,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o
+obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
 
diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index 06c19bb7bca6..06c19bb7bca6 100644
--- a/arch/arm/plat-omap/include/plat/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 2c90ac686686..d0c54c573d34 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -19,7 +19,7 @@
 #include <linux/davinci_emac.h>
 #include <asm/system.h>
 #include <plat/omap_device.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
 #include "control.h"
 #include "am35xx-emac.h"
 
diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/am35xx.h
index 95594495fcf6..95594495fcf6 100644
--- a/arch/arm/mach-omap2/include/mach/am35xx.h
+++ b/arch/arm/mach-omap2/am35xx.h
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9511584fdc4f..95b384d54f8a 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -33,11 +33,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
 static struct twl4030_platform_data sdp2430_twldata = {
@@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void)
 	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+	omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
 			&sdp2430_twldata);
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a98c688058a9..96cd3693e1ae 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -24,14 +24,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include <plat/usb.h>
 #include "common.h"
 #include <plat/dma.h>
@@ -39,7 +37,7 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
 
 #include "board-flash.h"
 #include "mux.h"
@@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 	.default_device	= &sdp3430_lcd_device,
 };
 
-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(16) | BIT(17),
 	.setup		= sdp3430_twl_gpio_setup,
@@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void)
 	int gpio_pendown;
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 2dc9ba523c7a..fc224ad86747 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -17,8 +17,7 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/board.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
@@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	omap_board_config = sdp_config;
-	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	zoom_peripherals_init();
 	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
 				  h8mbx00u0mer0em_sdrc_params);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index ad8a7d94afcd..a88809a59ea9 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,23 +28,22 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-nokia-dsi.h>
 #include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
@@ -544,7 +543,14 @@ static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+		.irq = 119 + OMAP44XX_IRQ_GIC_START,
+		.platform_data = &twl6040_data,
+	},
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
@@ -580,8 +586,8 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_CLK32KG |
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
-	omap4_pmic_init("twl6030", &sdp4430_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo,
+			ARRAY_SIZE(sdp4430_i2c_1_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
@@ -909,6 +915,7 @@ static void __init omap_4430sdp_init(void)
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(omap4_smp_ops),
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 92432c28673d..318feadb1d6e 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -21,12 +21,10 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 
@@ -37,11 +35,6 @@
 #define GPIO_USB_POWER		35
 #define GPIO_USB_NRESET		38
 
-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -67,9 +60,6 @@ static void __init am3517_crane_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 
-	omap_board_config = am3517_crane_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
 	/* Configure GPIO for EHCI port */
 	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
 		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 18f601096ce1..0d99c9110d01 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -25,14 +25,13 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
 	platform_device_register(&am3517_hecc_device);
 }
 
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static void __init am3517_evm_init(void)
 {
-	omap_board_config = am3517_evm_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index e5fa46bfde2f..cea3abace815 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,13 +29,11 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
 #include <plat/led.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 
@@ -204,7 +202,7 @@ static inline void __init apollon_init_smc91x(void)
 		return;
 	}
 
-	clk_enable(gpmc_fck);
+	clk_prepare_enable(gpmc_fck);
 	rate = clk_get_rate(gpmc_fck);
 
 	eth_cs = APOLLON_ETH_CS;
@@ -248,7 +246,7 @@ static inline void __init apollon_init_smc91x(void)
 		gpmc_cs_free(APOLLON_ETH_CS);
 	}
 out:
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 }
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 97d719047af3..8ffd612c5e07 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -23,6 +23,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
@@ -37,15 +38,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <mach/hardware.h>
 
@@ -64,7 +64,7 @@
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
 	.id		= 0,
@@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 }
 
 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
@@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {}
 static inline void cm_t3730_init_mux(void) {}
 #endif
 
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
 static void __init cm_t3x_common_init(void)
 {
-	omap_board_config = cm_t35_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a33ad4641d9a..59c0a45f75b0 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -38,13 +38,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/gpmc.h>
 
-#include <mach/am35xx.h>
+#include "am35xx.h"
 
 #include "mux.h"
 #include "control.h"
@@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void)
 static inline void cm_t3517_init_nand(void) {}
 #endif
 
-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
@@ -285,8 +280,6 @@ static void __init cm_t3517_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = cm_t3517_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 	cm_t3517_init_leds();
 	cm_t3517_init_nand();
 	cm_t3517_init_rtc();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 6567c1cd5572..7bb8056d4388 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -32,31 +32,27 @@
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <mach/id.h>
+#include "id.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/dm9000.h>
 #include <linux/interrupt.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
-
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 53c39d239d6e..0cabe61cd507 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -16,13 +16,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/irqs.h>
 
+#include <plat/cpu.h>
 #include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <plat/tc.h>
 
+#include "common.h"
 #include "board-flash.h"
 
 #define REG_FPGA_REV			0x10
@@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.devsize		= nand_type;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 6f93a20536ea..601ecdfb1cf9 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,11 +16,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include "common-board-devices.h"
 
@@ -127,6 +125,7 @@ static const char *omap4_boards_compat[] __initdata = {
 
 DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
+	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= omap_gic_of_init,
@@ -147,6 +146,7 @@ static const char *omap5_boards_compat[] __initdata = {
 
 DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
 	.reserve	= omap_reserve,
+	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap5_map_io,
 	.init_early	= omap5_init_early,
 	.init_irq	= omap_gic_of_init,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index ace20482e3e1..8d04bf851af4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -27,20 +27,19 @@
 #include <linux/io.h>
 #include <linux/input/matrix_keypad.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
-#include "common.h"
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
+#include "debug-devices.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 
@@ -266,9 +265,9 @@ static inline void __init h4_init_debug(void)
 		return;
 	}
 
-	clk_enable(gpmc_fck);
+	clk_prepare_enable(gpmc_fck);
 	rate = clk_get_rate(gpmc_fck);
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 
 	if (is_gpmc_muxed())
@@ -312,7 +311,7 @@ static inline void __init h4_init_debug(void)
 		gpmc_cs_free(eth_cs);
 
 out:
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 }
 
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 74915295482e..fb8bd837dd13 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -29,13 +29,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -192,7 +192,7 @@ static void __init igep_flash_init(void) {}
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
 #include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 	.cs             = IGEP2_SMSC911X_CS,
@@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev,
 };
 
 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= igep_twl_gpio_setup,
 };
@@ -554,6 +551,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ef9e82977499..ee8c3cfb95b3 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,21 +28,17 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
-
-#include <asm/delay.h>
 #include <plat/usb.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 }
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= ldp_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 677357ff61ac..d95f727ca39a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -20,19 +20,16 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <sound/tlv320aic3x.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/menelaus.h>
-#include <mach/irqs.h>
-#include <plat/mcspi.h>
-#include <plat/onenand.h>
 #include <plat/mmc.h>
-#include <plat/serial.h>
 
 #include "mux.h"
 
@@ -553,8 +550,8 @@ static int n8x0_auto_sleep_regulators(void)
 
 	ret = menelaus_set_regulator_sleep(1, val);
 	if (ret < 0) {
-		printk(KERN_ERR "Could not set regulators to sleep on "
-			"menelaus: %u\n", ret);
+		pr_err("Could not set regulators to sleep on menelaus: %u\n",
+		       ret);
 		return ret;
 	}
 	return 0;
@@ -566,8 +563,7 @@ static int n8x0_auto_voltage_scale(void)
 
 	ret = menelaus_set_vcore_hw(1400, 1050);
 	if (ret < 0) {
-		printk(KERN_ERR "Could not set VCORE voltage on "
-			"menelaus: %u\n", ret);
+		pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
 		return ret;
 	}
 	return 0;
@@ -600,7 +596,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
 static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
 	{
 		I2C_BOARD_INFO("menelaus", 0x72),
-		.irq = INT_24XX_SYS_NIRQ,
+		.irq = 7 + OMAP_INTC_START,
 		.platform_data = &n8x0_menelaus_platform_data,
 	},
 };
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6202fc76e490..68ff8d51973c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,18 +33,16 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
 
@@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0eb5eb..c64e565bdef5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -32,6 +32,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/nop-usb-xceiv.h>
 #include <linux/smsc911x.h>
 
 #include <linux/wl12xx.h>
@@ -40,16 +41,14 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include "common.h"
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
@@ -58,6 +57,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
@@ -74,6 +74,18 @@
 #define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
 #define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
 
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
+
 static u8 omap3_evm_version;
 
 u8 get_omap3_evm_rev(void)
@@ -107,7 +119,7 @@ static void __init omap3_evm_get_revision(void)
 }
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 	.cs             = OMAP3EVM_SMSC911X_CS,
@@ -376,9 +388,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };
@@ -525,9 +534,6 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -687,9 +693,6 @@ static void __init omap3_evm_init(void)
 	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
 	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
 
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
 
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index fca93d1afd43..7bd8253b5d1d 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -30,24 +30,21 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "gpmc-smsc911x.h"
+#include <plat/gpmc.h>
+#include <plat/sdrc.h>
+#include <plat/usb.h>
+
+#include "common.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
 
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc-smsc911x.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/usb.h>
-
 #define OMAP3LOGIC_SMSC911X_CS			1
 
 #define OMAP3530_LV_SOM_MMC_GPIO_CD		110
@@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 57aebee44fd0..00a1f4ae6e44 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,18 +35,16 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
-#include <mach/hardware.h>
-#include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index b318f5602e36..c7f3d026e6d4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -28,23 +28,26 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
@@ -57,7 +60,7 @@
 #include "common-board-devices.h"
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 #define OMAP3STALKER_ETHR_START	0x2c000000
 #define OMAP3STALKER_ETHR_SIZE	1024
@@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3stalker_twl_gpio_setup,
 };
@@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void)
 
 #define OMAP3_STALKER_TS_GPIO	175
 
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
-
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
@@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void)
 {
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_board_config = omap3_stalker_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 
 	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 485d14d6a8cd..944ffc436577 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -29,7 +29,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
 
 #include <linux/spi/ads7846.h>
@@ -37,17 +37,15 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/system_info.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 70f6d1d25463..2b012f9d6925 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -32,19 +32,18 @@
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <video/omapdss.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>
 
+#include "soc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "mux.h"
@@ -172,7 +171,7 @@ static void __init omap4_ehci_init(void)
 		return;
 	}
 	clk_set_rate(phy_ref_clk, 19200000);
-	clk_enable(phy_ref_clk);
+	clk_prepare_enable(phy_ref_clk);
 
 	/* disable the power to the usb hub prior to init and reset phy+hub */
 	ret = gpio_request_array(panda_ehci_gpios,
@@ -263,7 +262,14 @@ static struct twl6040_codec_data twl6040_codec = {
 static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
+static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+		.irq = 119 + OMAP44XX_IRQ_GIC_START,
+		.platform_data = &twl6040_data,
+	},
 };
 
 /* Panda board uses the common PMIC configuration */
@@ -293,8 +299,8 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_CLK32KG |
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo,
+			ARRAY_SIZE(panda_i2c_1_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP
@@ -518,6 +524,7 @@ static void __init omap4_panda_init(void)
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(omap4_smp_ops),
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 779734d8ba37..2e7f24030fc9 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,21 +37,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <mach/hardware.h>
-#include <plat/nand.h>
-#include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -116,7 +114,7 @@ static inline void __init overo_ads7846_init(void) { return; }
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
 #include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 	.id		= 0,
@@ -399,9 +397,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
@@ -522,8 +517,7 @@ static void __init overo_init(void)
 		udelay(10);
 		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
 	} else {
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_W2W_NRESET\n");
+		pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
 	}
 
 	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
@@ -542,8 +536,7 @@ static void __init overo_init(void)
 	if (ret == 0)
 		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
 	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_CPEN\n");
+		pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0ad1bb3bdb98..45997bfbcbd2 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -17,6 +17,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -26,7 +27,7 @@
 #include <plat/usb.h>
 #include <plat/gpmc.h>
 #include "common.h"
-#include <plat/onenand.h>
+#include <plat/serial.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
 
 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pullups		= BIT(0),
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
@@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = {
 static void __init rm680_i2c_init(void)
 {
 	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 }
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index df2534de3361..ed85fb898c7f 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -25,17 +25,18 @@
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 #include <linux/power/isp1704_charger.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
 #include <asm/system_info.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
-#include <plat/onenand.h>
-#include <plat/gpmc-smc91x.h>
+#include <plat/omap-pm.h>
+#include "gpmc-smc91x.h"
 
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
@@ -46,6 +47,10 @@
 #include <../drivers/staging/iio/light/tsl2563.h>
 #include <linux/lis3lv02d.h>
 
+#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
+#include <media/ir-rx51.h>
+#endif
+
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@@ -774,9 +779,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 }
 
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
 				| BIT(4) | BIT(5)
 				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
@@ -1051,7 +1053,7 @@ static int __init rx51_i2c_init(void)
 	rx51_twldata.vdac->constraints.apply_uV = true;
 	rx51_twldata.vdac->constraints.name = "VDAC";
 
-	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1220,6 +1222,30 @@ static void __init rx51_init_tsc2005(void)
 				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
 }
 
+#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
+static struct lirc_rx51_platform_data rx51_lirc_data = {
+	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
+	.pwm_timer = 9, /* Use GPT 9 for CIR */
+};
+
+static struct platform_device rx51_lirc_device = {
+	.name           = "lirc_rx51",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &rx51_lirc_data,
+	},
+};
+
+static void __init rx51_init_lirc(void)
+{
+	platform_device_register(&rx51_lirc_device);
+}
+#else
+static void __init rx51_init_lirc(void)
+{
+}
+#endif
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
@@ -1230,6 +1256,7 @@ void __init rx51_peripherals_init(void)
 	rx51_init_wl1251();
 	rx51_init_tsc2005();
 	rx51_init_si4713();
+	rx51_init_lirc();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 2c1289bd5e6a..c22e111bcd00 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -17,9 +17,9 @@
 #include <asm/mach-types.h>
 #include <video/omapdss.h>
 #include <plat/vram.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
 
 #include "mux.h"
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 345dd931f76f..7bbb05d9689b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -17,14 +17,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/include/mach/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h
index b76f49e7eed5..b76f49e7eed5 100644
--- a/arch/arm/mach-omap2/include/mach/board-rx51.h
+++ b/arch/arm/mach-omap2/board-rx51.h
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index d4c8392cadb6..c4f8833b4c3c 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -15,13 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/irqs.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 
@@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.power		= 500,
 };
 
-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
-
 static void __init ti81xx_evm_init(void)
 {
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = ti81xx_evm_config;
-	omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
 	usb_musb_init(&musb_board_data);
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f64f44173061..afb2278a29f6 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -18,10 +18,13 @@
 #include <linux/regulator/machine.h>
 
 #include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 #include <mach/board-zoom.h>
 
+#include "soc.h"
+#include "common.h"
+
 #define ZOOM_SMSC911X_CS	7
 #define ZOOM_SMSC911X_GPIO	158
 #define ZOOM_QUADUART_CS	3
@@ -81,8 +84,7 @@ static inline void __init zoom_init_quaduart(void)
 	quart_cs = ZOOM_QUADUART_CS;
 
 	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem"
-				"for Quad UART(TL16CP754C)\n");
+		pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
 		return;
 	}
 
@@ -104,8 +106,8 @@ static inline int omap_zoom_debugboard_detect(void)
 
 	if (gpio_request_one(debug_board_detect, GPIOF_IN,
 			     "Zoom debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
-		"board detect\n", debug_board_detect);
+		pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
+		       debug_board_detect);
 		return 0;
 	}
 
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 28187f134fff..b940ab2259fb 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -14,10 +14,12 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
 #include <linux/spi/spi.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
 #include <mach/board-zoom.h>
 
+#include "common.h"
+
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index b797cb279618..6bcc107b9fc3 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -19,6 +19,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute)
 }
 
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= zoom_twl_gpio_setup,
 };
 
@@ -281,7 +279,7 @@ static int __init omap_i2c_init(void)
 		codec_data->hs_extmute = 1;
 		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
 	}
-	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4e7e56142e6f..4994438e1f46 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/board.h>
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index b19a1f7234ae..c2d15212d64d 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -59,7 +59,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
 	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 
 	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
-			     OMAP24XX_CM_IDLEST_VAL, clk->name);
+			     OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
 
 	/*
 	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3d9d746b221a..3524f0e7b6d5 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,11 +33,11 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
@@ -68,14 +68,15 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	const struct prcm_config *ptr;
-	long highest_rate;
+	long highest_rate, sys_clk_rate;
 
 	highest_rate = -EINVAL;
+	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 		if (!(ptr->flags & cpu_mask))
 			continue;
-		if (ptr->xtal_speed != sclk->rate)
+		if (ptr->xtal_speed != sys_clk_rate)
 			continue;
 
 		highest_rate = ptr->mpu_speed;
@@ -94,12 +95,15 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
+	long sys_clk_rate;
+
+	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
 
-		if (prcm->xtal_speed != sclk->rate)
+		if (prcm->xtal_speed != sys_clk_rate)
 			continue;
 
 		if (prcm->mpu_speed <= rate) {
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index d6e34dd9e7e7..7c6da2f731dc 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -56,6 +56,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	struct omap_sdrc_params *sdrc_cs0;
 	struct omap_sdrc_params *sdrc_cs1;
 	int ret;
+	unsigned long clkrate;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -64,11 +65,12 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (validrate != rate)
 		return -EINVAL;
 
-	sdrcrate = sdrc_ick_p->rate;
-	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) >> 1);
+	sdrcrate = __clk_get_rate(sdrc_ick_p);
+	clkrate = __clk_get_rate(clk);
+	if (rate > clkrate)
+		sdrcrate <<= ((rate / clkrate) >> 1);
 	else
-		sdrcrate >>= ((clk->rate / rate) >> 1);
+		sdrcrate >>= ((clkrate / rate) >> 1);
 
 	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
 	if (ret)
@@ -82,7 +84,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	/*
 	 * XXX This only needs to be done when the CPU frequency changes
 	 */
-	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	_mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
 	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
 	c += 1;  /* for safety */
 	c *= SDRC_MPURATE_LOOPS;
@@ -90,28 +92,26 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (c == 0)
 		c = 1;
 
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		 validrate);
-	pr_debug("clock: SDRC CS0 timing params used:"
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
+		 clkrate, validrate);
+	pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
 		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
 	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: "
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+		pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+			 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+			 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 
 	if (sdrc_cs1)
 		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
+				  new_div, unlock_dll, c, rate > clkrate,
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
 				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 	else
 		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
+				  new_div, unlock_dll, c, rate > clkrate,
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 04d551b1f7f7..eaed3900a83c 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -71,8 +71,8 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
 
 	if (!clks->parent) {
 		/* This indicates a data problem */
-		WARN(1, "clock: Could not find parent clock %s in clksel array "
-		     "of clock %s\n", src_clk->name, clk->name);
+		WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
+		     __clk_get_name(clk), __clk_get_name(src_clk));
 		return NULL;
 	}
 
@@ -126,8 +126,9 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
 
 	if (max_div == 0) {
 		/* This indicates an error in the clksel data */
-		WARN(1, "clock: Could not find divisor for clock %s parent %s"
-		     "\n", clk->name, src_clk->parent->name);
+		WARN(1, "clock: %s: could not find divisor for parent %s\n",
+		     __clk_get_name(clk),
+		     __clk_get_name(__clk_get_parent(src_clk)));
 		return 0;
 	}
 
@@ -176,8 +177,10 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	struct clk *parent;
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	parent = __clk_get_parent(clk);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return 0;
 
@@ -191,8 +194,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
 
 	if (!clkr->div) {
 		/* This indicates a data error */
-		WARN(1, "clock: Could not find fieldval %d for clock %s parent "
-		     "%s\n", field_val, clk->name, clk->parent->name);
+		WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
+		     __clk_get_name(clk), field_val, __clk_get_name(parent));
 		return 0;
 	}
 
@@ -213,11 +216,13 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	struct clk *parent;
 
 	/* should never happen */
 	WARN_ON(div == 0);
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	parent = __clk_get_parent(clk);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return ~0;
 
@@ -230,8 +235,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
 	}
 
 	if (!clkr->div) {
-		pr_err("clock: Could not find divisor %d for clock %s parent "
-		       "%s\n", div, clk->name, clk->parent->name);
+		pr_err("clock: %s: could not find divisor %d for parent %s\n",
+		       __clk_get_name(clk), div, __clk_get_name(parent));
 		return ~0;
 	}
 
@@ -281,16 +286,23 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
+	struct clk *parent;
+	unsigned long parent_rate;
+	const char *clk_name;
+
+	parent = __clk_get_parent(clk);
+	parent_rate = __clk_get_rate(parent);
+	clk_name = __clk_get_name(clk);
 
 	if (!clk->clksel || !clk->clksel_mask)
 		return ~0;
 
 	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
+		 clk_name, target_rate);
 
 	*new_div = 1;
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return ~0;
 
@@ -300,30 +312,29 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			pr_err("clock: clksel_rate table not sorted "
-			       "for clock %s", clk->name);
+			pr_err("clock: %s: clksel_rate table not sorted\n",
+			       clk_name);
 
 		last_div = clkr->div;
 
-		test_rate = clk->parent->rate / clkr->div;
+		test_rate = parent_rate / clkr->div;
 
 		if (test_rate <= target_rate)
 			break; /* found it */
 	}
 
 	if (!clkr->div) {
-		pr_err("clock: Could not find divisor for target "
-		       "rate %ld for clock %s parent %s\n", target_rate,
-		       clk->name, clk->parent->name);
+		pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
+		       clk_name, target_rate, __clk_get_name(parent));
 		return ~0;
 	}
 
 	*new_div = clkr->div;
 
 	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
+		 (parent_rate / clkr->div));
 
-	return clk->parent->rate / clkr->div;
+	return parent_rate / clkr->div;
 }
 
 /*
@@ -345,10 +356,15 @@ void omap2_init_clksel_parent(struct clk *clk)
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 	u32 r, found = 0;
+	struct clk *parent;
+	const char *clk_name;
 
 	if (!clk->clksel || !clk->clksel_mask)
 		return;
 
+	parent = __clk_get_parent(clk);
+	clk_name = __clk_get_name(clk);
+
 	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
@@ -358,12 +374,13 @@ void omap2_init_clksel_parent(struct clk *clk)
 				continue;
 
 			if (clkr->val == r) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
+				if (parent != clks->parent) {
+					pr_debug("clock: %s: inited parent to %s (was %s)\n",
+						 clk_name,
+						 __clk_get_name(clks->parent),
+						 ((parent) ?
+						  __clk_get_name(parent) :
+						 "NULL"));
 					clk_reparent(clk, clks->parent);
 				};
 				found = 1;
@@ -373,7 +390,7 @@ void omap2_init_clksel_parent(struct clk *clk)
 
 	/* This indicates a data error */
 	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
-	     clk->name, r);
+	     clk_name, r);
 
 	return;
 }
@@ -391,15 +408,17 @@ unsigned long omap2_clksel_recalc(struct clk *clk)
 {
 	unsigned long rate;
 	u32 div = 0;
+	struct clk *parent;
 
 	div = _read_divisor(clk);
 	if (div == 0)
-		return clk->rate;
+		return __clk_get_rate(clk);
 
-	rate = clk->parent->rate / div;
+	parent = __clk_get_parent(clk);
+	rate = __clk_get_rate(parent) / div;
 
-	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
-		 rate, div);
+	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
+		 __clk_get_name(clk), rate, div);
 
 	return rate;
 }
@@ -454,9 +473,10 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 
 	_write_clksel_reg(clk, field_val);
 
-	clk->rate = clk->parent->rate / new_div;
+	clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
 
-	pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+	pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk),
+		 __clk_get_rate(clk));
 
 	return 0;
 }
@@ -498,13 +518,15 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
 	clk_reparent(clk, new_parent);
 
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
+	clk->rate = __clk_get_rate(new_parent);
 
 	if (parent_div > 0)
-		clk->rate /= parent_div;
+		__clk_get_rate(clk) /= parent_div;
 
 	pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
+		 __clk_get_name(clk),
+		 __clk_get_name(__clk_get_parent(clk)),
+		 __clk_get_rate(clk));
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index cd7fd0f91149..80411142f482 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -22,8 +22,8 @@
 #include <asm/div64.h>
 
 #include <plat/clock.h>
-#include <plat/cpu.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
@@ -87,7 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / n;
+	fint = __clk_get_rate(__clk_get_parent(clk)) / n;
 
 	if (cpu_is_omap24xx()) {
 		/* Should not be called for OMAP2, so warn if it is called */
@@ -105,13 +105,13 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
 	}
 
 	if (fint < fint_min) {
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "lowering max_divider\n", n);
+		pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+			 n);
 		dd->max_divider = n;
 		ret = DPLL_FINT_UNDERFLOW;
 	} else if (fint > fint_max) {
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "boosting min_divider\n", n);
+		pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+			 n);
 		dd->min_divider = n;
 		ret = DPLL_FINT_INVALID;
 	} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
@@ -211,7 +211,7 @@ void omap2_init_dpll_parent(struct clk *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
@@ -252,16 +252,16 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 	if (cpu_is_omap24xx()) {
 		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	} else if (cpu_is_omap34xx()) {
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
+			return __clk_get_rate(dd->clk_bypass);
+	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	}
 
 	v = __raw_readl(dd->mult_div1_reg);
@@ -270,7 +270,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+	dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -296,16 +296,20 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	unsigned long scaled_rt_rp;
 	unsigned long new_rate = 0;
 	struct dpll_data *dd;
+	unsigned long ref_rate;
+	const char *clk_name;
 
 	if (!clk || !clk->dpll_data)
 		return ~0;
 
 	dd = clk->dpll_data;
 
+	ref_rate = __clk_get_rate(dd->clk_ref);
+	clk_name = __clk_get_name(clk);
 	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
-		 clk->name, target_rate);
+		 clk_name, target_rate);
 
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
 	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
 	dd->last_rounded_rate = 0;
@@ -332,14 +336,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
+				    ref_rate);
 
 		/* m can't be set low enough for this n - try with a larger n */
 		if (r == DPLL_MULT_UNDERFLOW)
 			continue;
 
 		pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
-			 clk->name, m, n, new_rate);
+			 clk_name, m, n, new_rate);
 
 		if (target_rate == new_rate) {
 			dd->last_rounded_m = m;
@@ -350,8 +354,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	}
 
 	if (target_rate != new_rate) {
-		pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
-			 target_rate);
+		pr_debug("clock: %s: cannot round to rate %ld\n",
+			 clk_name, target_rate);
 		return ~0;
 	}
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ea3f565ba1a4..961ac8f7e13d 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -22,14 +22,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <trace/events/power.h>
 
 #include <asm/cpu.h>
+
 #include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
 #include <plat/prcm.h>
 
+#include <trace/events/power.h>
+
+#include "soc.h"
+#include "clockdomain.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
@@ -76,7 +78,7 @@ static void _omap2_module_wait_ready(struct clk *clk)
 	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
 
 	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
-			     clk->name);
+			     __clk_get_name(clk));
 }
 
 /* Public functions */
@@ -92,18 +94,21 @@ static void _omap2_module_wait_ready(struct clk *clk)
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
+	const char *clk_name;
 
 	if (!clk->clkdm_name)
 		return;
 
+	clk_name = __clk_get_name(clk);
+
 	clkdm = clkdm_lookup(clk->clkdm_name);
 	if (clkdm) {
 		pr_debug("clock: associated clk %s to clkdm %s\n",
-			 clk->name, clk->clkdm_name);
+			 clk_name, clk->clkdm_name);
 		clk->clkdm = clkdm;
 	} else {
-		pr_debug("clock: could not associate clk %s to "
-			 "clkdm %s\n", clk->name, clk->clkdm_name);
+		pr_debug("clock: could not associate clk %s to clkdm %s\n",
+			 clk_name, clk->clkdm_name);
 	}
 }
 
@@ -226,8 +231,7 @@ void omap2_dflt_clk_disable(struct clk *clk)
 		 * 'Independent' here refers to a clock which is not
 		 * controlled by its parent.
 		 */
-		printk(KERN_ERR "clock: clk_disable called on independent "
-		       "clock %s which has no enable_reg\n", clk->name);
+		pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name);
 		return;
 	}
 
@@ -270,8 +274,7 @@ const struct clkops clkops_omap2_dflt = {
 void omap2_clk_disable(struct clk *clk)
 {
 	if (clk->usecount == 0) {
-		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
-		     "already 0?", clk->name);
+		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name);
 		return;
 	}
 
@@ -332,8 +335,8 @@ int omap2_clk_enable(struct clk *clk)
 	if (clkdm_control && clk->clkdm) {
 		ret = clkdm_clk_enable(clk->clkdm, clk);
 		if (ret) {
-			WARN(1, "clock: %s: could not enable clockdomain %s: "
-			     "%d\n", clk->name, clk->clkdm->name, ret);
+			WARN(1, "clock: %s: could not enable clockdomain %s: %d\n",
+			     clk->name, clk->clkdm->name, ret);
 			goto oce_err2;
 		}
 	}
@@ -501,10 +504,8 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 
 	hfclkin_rate = clk_get_rate(hfclkin_ck);
 
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(hfclkin_rate / 1000000),
-		((hfclkin_rate / 100000) % 10),
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
 		(clk_get_rate(core_ck) / 1000000),
 		(clk_get_rate(mpu_ck) / 1000000));
 }
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 002745181ad6..c3cde1a2b6de 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -18,9 +18,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
@@ -1804,6 +1804,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
+	CLK(NULL,	"dss_ick",		&dss_ick,	CK_242X),
 	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_242X),
 	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_242X),
 	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_242X),
@@ -1843,12 +1844,16 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_242X),
 	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_242X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp2_ick,	CK_242X),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_242X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_242X),
 	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_242X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_242X),
 	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_242X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
@@ -1859,12 +1864,15 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
+	CLK(NULL,	"mpu_wdt_ick",		&mpu_wdt_ick,	CK_242X),
 	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_242X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
 	CLK("omap24xxcam", "fck",	&cam_fck,	CK_242X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_242X),
 	CLK("omap24xxcam", "ick",	&cam_ick,	CK_242X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_242X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_242X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_242X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_242X),
@@ -1873,16 +1881,22 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_242X),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_242X),
 	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK(NULL,	"mmc_ick",	&mmc_ick,	CK_242X),
 	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"mmc_fck",	&mmc_fck,	CK_242X),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_242X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_242X),
 	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_242X),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_242X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_242X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_242X),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_242X),
 	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_242X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_242X),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_242X),
 	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_242X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
@@ -1892,14 +1906,18 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
 	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_242X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
+	CLK(NULL,	"rng_ick",		&rng_ick,	CK_242X),
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_243X),
-	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
-	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_242X),
+	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_242X),
+	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_242X),
+	CLK(NULL,	"cpufreq_ck",	&virt_prcm_set,	CK_242X),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index dfda9a3f2cb2..a8e326177466 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index cacabb070e22..22404fe435e7 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,9 +17,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
@@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X),
 	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X),
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
+	CLK("twl",	"fck",		&osc_ck,	CK_243X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
@@ -1887,6 +1888,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
+	CLK(NULL,	"dss_ick",		&dss_ick,	CK_243X),
 	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_243X),
 	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X),
 	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X),
@@ -1926,20 +1928,28 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_243X),
 	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_243X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp2_ick,	CK_243X),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_243X),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK(NULL,	"mcbsp3_ick",	&mcbsp3_ick,	CK_243X),
 	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_243X),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK(NULL,	"mcbsp4_ick",	&mcbsp4_ick,	CK_243X),
 	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_243X),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK(NULL,	"mcbsp5_ick",	&mcbsp5_ick,	CK_243X),
 	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_243X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_243X),
 	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_243X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_243X),
 	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_243X),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK(NULL,	"mcspi3_ick",	&mcspi3_ick,	CK_243X),
 	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_243X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X),
@@ -1950,13 +1960,16 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X),
+	CLK(NULL,	"mpu_wdt_ick",	&mpu_wdt_ick,	CK_243X),
 	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
 	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_243X),
 	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_243X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X),
@@ -1965,10 +1978,14 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_243X),
 	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_243X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_243X),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_243X),
 	CLK(NULL,	"i2chs1_fck",	&i2chs1_fck,	CK_243X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_243X),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_243X),
 	CLK(NULL,	"i2chs2_fck",	&i2chs2_fck,	CK_243X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
@@ -1977,22 +1994,29 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
+	CLK(NULL,	"rng_ick",	&rng_ick,	CK_243X),
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_243X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
 	CLK("musb-omap2430",	"ick",	&usbhs_ick,	CK_243X),
+	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK(NULL,	"mmchs1_ick",	&mmchs1_ick,	CK_243X),
 	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK(NULL,	"mmchs2_ick",	&mmchs2_ick,	CK_243X),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_243X),
 	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
 	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK(NULL,	"mmchsdb1_fck",		&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
+	CLK(NULL,	"mmchsdb2_fck",		&mmchsdb2_fck,	CK_243X),
 	CLK(NULL,	"timer_32k_ck",  &func_32k_ck,   CK_243X),
 	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"cpufreq_ck",	&virt_prcm_set,	CK_243X),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 12500097378d..e92be1fc1a00 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,9 +22,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 25bbcc7ca4dc..b87b88c2638b 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>
 
+#include "am33xx.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
@@ -1013,6 +1013,7 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck,	CK_AM33XX),
+	CLK("cpu0",	NULL,			&dpll_mpu_ck,		CK_AM33XX),
 	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck,	CK_AM33XX),
@@ -1027,7 +1028,9 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"cefuse_fck",		&cefuse_fck,	CK_AM33XX),
 	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick,	CK_AM33XX),
 	CLK(NULL,	"dcan0_fck",		&dcan0_fck,	CK_AM33XX),
+	CLK("481cc000.d_can",	NULL,		&dcan0_fck,	CK_AM33XX),
 	CLK(NULL,	"dcan1_fck",		&dcan1_fck,	CK_AM33XX),
+	CLK("481d0000.d_can",	NULL,		&dcan1_fck,	CK_AM33XX),
 	CLK(NULL,	"debugss_ick",		&debugss_ick,	CK_AM33XX),
 	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk,	CK_AM33XX),
 	CLK("davinci-mcasp.0",  NULL,           &mcasp0_fck,    CK_AM33XX),
@@ -1036,13 +1039,13 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"mmu_fck",		&mmu_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt1_fck",		&timer1_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt2_fck",		&timer2_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt3_fck",		&timer3_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt4_fck",		&timer4_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt5_fck",		&timer5_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt6_fck",		&timer6_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt7_fck",		&timer7_fck,	CK_AM33XX),
+	CLK(NULL,	"timer1_fck",		&timer1_fck,	CK_AM33XX),
+	CLK(NULL,	"timer2_fck",		&timer2_fck,	CK_AM33XX),
+	CLK(NULL,	"timer3_fck",		&timer3_fck,	CK_AM33XX),
+	CLK(NULL,	"timer4_fck",		&timer4_fck,	CK_AM33XX),
+	CLK(NULL,	"timer5_fck",		&timer5_fck,	CK_AM33XX),
+	CLK(NULL,	"timer6_fck",		&timer6_fck,	CK_AM33XX),
+	CLK(NULL,	"timer7_fck",		&timer7_fck,	CK_AM33XX),
 	CLK(NULL,	"usbotg_fck",		&usbotg_fck,	CK_AM33XX),
 	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck,	CK_AM33XX),
 	CLK(NULL,	"wdt1_fck",		&wdt1_fck,	CK_AM33XX),
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 794d82702c85..83bb01427d40 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock3xxx.h"
 #include "prm2xxx_3xxx.h"
@@ -49,8 +49,7 @@ int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 	 * on DPLL4.
 	 */
 	if (omap_rev() == OMAP3430_REV_ES1_0) {
-		pr_err("clock: DPLL4 cannot change rate due to "
-		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
 		return -EINVAL;
 	}
 
@@ -64,15 +63,15 @@ void __init omap3_clk_lock_dpll5(void)
 
 	dpll5_clk = clk_get(NULL, "dpll5_ck");
 	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_enable(dpll5_clk);
+	clk_prepare_enable(dpll5_clk);
 
 	/* Program dpll5_m2_clk divider for no division */
 	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_enable(dpll5_m2_clk);
+	clk_prepare_enable(dpll5_m2_clk);
 	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
 
-	clk_disable(dpll5_m2_clk);
-	clk_disable(dpll5_clk);
+	clk_disable_unprepare(dpll5_m2_clk);
+	clk_disable_unprepare(dpll5_clk);
 	return;
 }
 
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 83bed9ad3017..1f42c9d5ecf3 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,9 +21,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock3xxx.h"
@@ -3215,7 +3215,6 @@ static struct clk dummy_apb_pclk = {
  * clkdev
  */
 
-/* XXX At some point we should rename this file to clock3xxx_data.c */
 static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
@@ -3226,6 +3225,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck,	CK_3XXX),
 	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
 	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
+	CLK("twl",	"fck",		&osc_sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
@@ -3242,11 +3242,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
 	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_3XXX),
 	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
+	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_3XXX),
 	CLK(NULL,	"omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
 	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
+	CLK(NULL,	"omap_96m_alwon_fck_3630", &omap_96m_alwon_fck_3630, CK_36XX),
 	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_3XXX),
 	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_3XXX),
 	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_3XXX),
@@ -3262,6 +3264,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
 	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
+	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
@@ -3271,6 +3274,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_3XXX),
 	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_3XXX),
 	CLK(NULL,	"arm_fck",	&arm_fck,	CK_3XXX),
+	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_34XX | CK_36XX),
@@ -3294,6 +3298,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_tll",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
@@ -3314,6 +3319,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
 	CLK("omap_hdq.0",	"fck",	&hdq_fck,	CK_3XXX),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_3XXX),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
@@ -3321,6 +3327,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_3XXX),
 	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
 	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_3XXX),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_3XXX),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
@@ -3328,28 +3336,42 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_tll",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap_hsmmc.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"mmchs3_ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
 	CLK("omap-sham",	"ick",	&sha12_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"des2_ick",	&des2_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hsmmc.1",	"ick",	&mmchs2_ick,	CK_3XXX),
 	CLK("omap_hsmmc.0",	"ick",	&mmchs1_ick,	CK_3XXX),
+	CLK(NULL,	"mmchs2_ick",	&mmchs2_ick,	CK_3XXX),
+	CLK(NULL,	"mmchs1_ick",	&mmchs1_ick,	CK_3XXX),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_3XXX),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_3XXX),
 	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_3XXX),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_3XXX),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_3XXX),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi4_ick",	&mcspi4_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi3_ick",	&mcspi3_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_3XXX),
 	CLK("omap_i2c.3", "ick",	&i2c3_ick,	CK_3XXX),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_3XXX),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_3XXX),
+	CLK(NULL,	"i2c3_ick",	&i2c3_ick,	CK_3XXX),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_3XXX),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_3XXX),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_3XXX),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_3XXX),
 	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_3XXX),
 	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_3XXX),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_3XXX),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp5_ick",	&mcbsp5_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_3XXX),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_3XXX),
@@ -3368,7 +3390,9 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_3XXX),
 	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck, CK_3XXX),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"dss_ick",		&dss_ick_3430es1,	CK_3430ES1),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"dss_ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
@@ -3384,6 +3408,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
 	CLK("usbhs_omap",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
 	CLK("usbhs_omap",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_tll",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_tll",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
@@ -3393,6 +3419,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2PLUS | CK_36XX),
 	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
+	CLK(NULL,	"wdt2_ick",	&wdt2_ick,	CK_3XXX),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_3XXX),
 	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_3XXX),
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
@@ -3438,9 +3465,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_3XXX),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_3XXX),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp4_ick",	&mcbsp2_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp3_ick",	&mcbsp3_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp4_ick,	CK_3XXX),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_3XXX),
 	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_3XXX),
 	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_3XXX),
+	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_3XXX),
 	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_3XXX),
@@ -3456,8 +3487,12 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
+	CLK(NULL,	"emac_ick",	&emac_ick,	CK_AM35XX),
+	CLK(NULL,	"emac_fck",	&emac_fck,	CK_AM35XX),
 	CLK("davinci_emac.0",	NULL,	&emac_ick,	CK_AM35XX),
 	CLK("davinci_mdio.0",	NULL,	&emac_fck,	CK_AM35XX),
+	CLK(NULL,	"vpfe_ick",	&emac_ick,	CK_AM35XX),
+	CLK(NULL,	"vpfe_fck",	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK(NULL,	"hsotgusb_ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
@@ -3466,6 +3501,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
 	CLK(NULL,	"timer_32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_3XXX),
+	CLK(NULL,	"cpufreq_ck",	&dpll1_ck,	CK_3XXX),
 };
 
 
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d7f55e43b761..d661d138f270 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,9 +28,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock44xx.h"
@@ -3156,6 +3156,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
 	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
 	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
+	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
 	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
@@ -3212,6 +3213,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"ocp2scp_usb_phy_ick",		&ocp2scp_usb_phy_ick,	CK_443X),
 	CLK(NULL,	"ocp_wp_noc_ick",		&ocp_wp_noc_ick,	CK_443X),
+	CLK(NULL,	"rng_ick",			&rng_ick,	CK_443X),
 	CLK("omap_rng",	"ick",				&rng_ick,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"sl2if_ick",			&sl2if_ick,	CK_443X),
@@ -3243,6 +3245,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
@@ -3253,15 +3256,19 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
+	CLK(NULL,	"usb_otg_hs_ick",		&usb_otg_hs_ick,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
 	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("usbhs_tll",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
@@ -3312,8 +3319,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
 	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck,	CK_443X),
+	CLK("usbhs_tll",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
 	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck,	CK_443X),
+	/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
 	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
@@ -3325,6 +3334,18 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4a318000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48032000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48034000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48036000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8664f5a8bfb6..cbb879139c51 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -174,9 +174,8 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-			 "clkdm %s\n", autodep->clkdm.ptr->name,
-			 clkdm->name);
+		pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
+			 clkdm->name, autodep->clkdm.ptr->name);
 
 		clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
 		clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
@@ -205,9 +204,8 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-			 "clkdm %s\n", autodep->clkdm.ptr->name,
-			 clkdm->name);
+		pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
+			 clkdm->name, autodep->clkdm.ptr->name);
 
 		clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
 		clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
@@ -469,14 +467,14 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
-		pr_debug("clockdomain: hardware will wake up %s when %s wakes "
-			 "up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
 	}
@@ -510,14 +508,14 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
-		pr_debug("clockdomain: hardware will no longer wake up %s "
-			 "after %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
 	}
@@ -555,8 +553,8 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
@@ -613,15 +611,14 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
-		pr_debug("clockdomain: will prevent %s from sleeping if %s "
-			 "is active\n", clkdm1->name, clkdm2->name);
+		pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
 	}
@@ -657,16 +654,14 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
 	if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
-		pr_debug("clockdomain: will no longer prevent %s from "
-			 "sleeping if %s is active\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
+			 clkdm1->name, clkdm2->name);
 
 		ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
 	}
@@ -706,9 +701,8 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		ret = -EINVAL;
 
 	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
+		pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+			 clkdm1->name, clkdm2->name);
 		return ret;
 	}
 
@@ -755,8 +749,8 @@ int clkdm_sleep(struct clockdomain *clkdm)
 		return -EINVAL;
 
 	if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
-		pr_debug("clockdomain: %s does not support forcing "
-			 "sleep via software\n", clkdm->name);
+		pr_debug("clockdomain: %s does not support forcing sleep via software\n",
+			 clkdm->name);
 		return -EINVAL;
 	}
 
@@ -790,8 +784,8 @@ int clkdm_wakeup(struct clockdomain *clkdm)
 		return -EINVAL;
 
 	if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
-		pr_debug("clockdomain: %s does not support forcing "
-			 "wakeup via software\n", clkdm->name);
+		pr_debug("clockdomain: %s does not support forcing wakeup via software\n",
+			 clkdm->name);
 		return -EINVAL;
 	}
 
@@ -826,8 +820,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
 		return;
 
 	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
-		pr_debug("clock: automatic idle transitions cannot be enabled "
-			 "on clockdomain %s\n", clkdm->name);
+		pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
+			 clkdm->name);
 		return;
 	}
 
@@ -861,8 +855,8 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
 		return;
 
 	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
-		pr_debug("clockdomain: automatic idle transitions cannot be "
-			 "disabled on %s\n", clkdm->name);
+		pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
+			 clkdm->name);
 		return;
 	}
 
@@ -905,6 +899,23 @@ bool clkdm_in_hwsup(struct clockdomain *clkdm)
 	return ret;
 }
 
+/**
+ * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
+ * @clkdm: struct clockdomain *
+ *
+ * Returns true if clockdomain @clkdm has the
+ * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
+ * null.  More information is available in the documentation for the
+ * CLKDM_MISSING_IDLE_REPORTING macro.
+ */
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return false;
+
+	return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
+}
+
 /* Clockdomain-to-clock/hwmod framework interface code */
 
 static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
@@ -927,7 +938,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
 	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
-	pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+	pr_debug("clockdomain: %s: enabled\n", clkdm->name);
 
 	return 0;
 }
@@ -952,7 +963,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
 	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
-	pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+	pr_debug("clockdomain: %s: disabled\n", clkdm->name);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 5601dc13785e..629576be7444 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -1,9 +1,7 @@
 /*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
  * OMAP2/3 clockdomain framework functions
  *
- * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008, 2012 Texas Instruments, Inc.
  * Copyright (C) 2008-2011 Nokia Corporation
  *
  * Paul Walmsley
@@ -34,6 +32,20 @@
  * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
  *     active whenever the MPU is active.  True for interconnects and
  *     the WKUP clockdomains.
+ * CLKDM_MISSING_IDLE_REPORTING: The idle status of the IP blocks and
+ *     clocks inside this clockdomain are not taken into account by
+ *     the PRCM when determining whether the clockdomain is idle.
+ *     Without this flag, if the clockdomain is set to
+ *     hardware-supervised idle mode, the PRCM may transition the
+ *     enclosing powerdomain to a low power state, even when devices
+ *     inside the clockdomain and powerdomain are in use.  (An example
+ *     of such a clockdomain is the EMU clockdomain on OMAP3/4.)  If
+ *     this flag is set, and the clockdomain does not support the
+ *     force-sleep mode, then the HW_AUTO mode will be used to put the
+ *     clockdomain to sleep.  Similarly, if the clockdomain supports
+ *     the force-wakeup mode, then it will be used whenever a clock or
+ *     IP block inside the clockdomain is active, rather than the
+ *     HW_AUTO mode.
  */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
@@ -41,6 +53,7 @@
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
+#define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@@ -187,6 +200,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
 void clkdm_allow_idle(struct clockdomain *clkdm);
 void clkdm_deny_idle(struct clockdomain *clkdm);
 bool clkdm_in_hwsup(struct clockdomain *clkdm);
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
 
 int clkdm_wakeup(struct clockdomain *clkdm);
 int clkdm_sleep(struct clockdomain *clkdm);
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index a0d68dbecfa3..9a7792aec673 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -162,6 +162,19 @@ static void _disable_hwsup(struct clockdomain *clkdm)
 						clkdm->clktrctrl_mask);
 }
 
+static int omap3_clkdm_sleep(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+	return 0;
+}
+
+static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+	return 0;
+}
 
 static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
 {
@@ -170,6 +183,17 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
 	if (!clkdm->clktrctrl_mask)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		_enable_hwsup(clkdm);
+		return 0;
+	}
+
 	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
@@ -193,6 +217,17 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
 	if (!clkdm->clktrctrl_mask)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+	    (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+		omap3_clkdm_wakeup(clkdm);
+		return 0;
+	}
+
 	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
@@ -209,36 +244,68 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
 	return 0;
 }
 
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
+static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
 {
-	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_add_autodeps(clkdm);
+
+	omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
-	return 0;
 }
 
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
+static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+	omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
-	return 0;
+
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_del_autodeps(clkdm);
 }
 
-static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
 {
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_add_autodeps(clkdm);
+	bool hwsup = false;
 
-	omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		_disable_hwsup(clkdm);
+		_clkdm_add_autodeps(clkdm);
+		_enable_hwsup(clkdm);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap3_clkdm_wakeup(clkdm);
+	}
+
+	return 0;
 }
 
-static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
 {
-	omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
-	if (atomic_read(&clkdm->usecount) > 0)
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		_disable_hwsup(clkdm);
 		_clkdm_del_autodeps(clkdm);
+		_enable_hwsup(clkdm);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+			omap3_clkdm_sleep(clkdm);
+	}
+
+	return 0;
 }
 
 struct clkdm_ops omap2_clkdm_operations = {
@@ -267,6 +334,6 @@ struct clkdm_ops omap3_clkdm_operations = {
 	.clkdm_wakeup		= omap3_clkdm_wakeup,
 	.clkdm_allow_idle	= omap3_clkdm_allow_idle,
 	.clkdm_deny_idle	= omap3_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap2_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap2_clkdm_clk_disable,
+	.clkdm_clk_enable	= omap3xxx_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap3xxx_clkdm_clk_disable,
 };
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index 762f2cc542ce..6fc6155625bc 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -113,6 +113,17 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
 	if (!clkdm->prcm_partition)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		omap4_clkdm_allow_idle(clkdm);
+		return 0;
+	}
+
 	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 56089c49142a..933a35cd124a 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -387,14 +387,11 @@ static struct clockdomain per_am35x_clkdm = {
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 };
 
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
 static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
-	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
+	.flags		= (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP |
+			   CLKDM_MISSING_IDLE_REPORTING),
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 };
 
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 63d60a773d3b..b56d06b48782 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -390,7 +390,8 @@ static struct clockdomain emu_sys_44xx_clkdm = {
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
-	.flags		  = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
+	.flags		  = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP |
+			     CLKDM_MISSING_IDLE_REPORTING),
 };
 
 static struct clockdomain l3_dma_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index 532027ee3d8d..adf7bb79b18f 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -25,263 +25,328 @@
  * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
  */
 #define AM33XX_AUTO_DPLL_MODE_SHIFT			0
+#define AM33XX_AUTO_DPLL_MODE_WIDTH			3
 #define AM33XX_AUTO_DPLL_MODE_MASK			(0x7 << 0)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT		14
+#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_ADC_FCLK_MASK		(1 << 16)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT		11
+#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CAN_CLK_MASK			(1 << 11)
 
 /* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK		(1 << 4)
 
 /* Used by CM_PER_CPSW_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK	(1 << 4)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK	(1 << 4)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT	5
+#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK		(1 << 5)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT		6
+#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK		(1 << 6)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT		6
+#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK		(1 << 6)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT	9
+#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK	(1 << 9)
 
 /* Used by CM_L3_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK		(1 << 2)
 
 /* Used by CM_L3_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT		4
+#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH		1
 #define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK		(1 << 4)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK		(1 << 2)
 
 /* Used by CM_GFX_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GFX_FCLK_MASK		(1 << 9)
 
 /* Used by CM_GFX_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK		(1 << 8)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK		(1 << 8)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT		19
+#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK		(1 << 19)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT		20
+#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK		(1 << 20)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT		21
+#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK		(1 << 21)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT		22
+#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK		(1 << 22)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT		26
+#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK		(1 << 26)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT		18
+#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT		11
+#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT		24
+#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_I2C_FCLK_MASK		(1 << 24)
 
 /* Used by CM_PER_PRUSS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT		5
+#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK		(1 << 5)
 
 /* Used by CM_PER_PRUSS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK		(1 << 4)
 
 /* Used by CM_PER_PRUSS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT	6
+#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK		(1 << 6)
 
 /* Used by CM_PER_L3S_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L3S_GCLK_MASK		(1 << 3)
 
 /* Used by CM_L3_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK		(1 << 3)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L3_GCLK_MASK			(1 << 4)
 
 /* Used by CM_PER_L4FW_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK		(1 << 8)
 
 /* Used by CM_PER_L4HS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK		(1 << 3)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK		(1 << 8)
 
 /* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
 #define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK		(1 << 8)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT	8
+#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_RTC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT		8
+#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK		(1 << 8)
 
 /* Used by CM_L4_WKUP_AON_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT	2
+#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK	(1 << 2)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK		(1 << 2)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT		17
+#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK		(1 << 17)
 
 /* Used by CM_PER_LCDC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT	4
+#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK	(1 << 4)
 
 /* Used by CM_PER_LCDC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT	5
+#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH	1
 #define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK	(1 << 5)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT		7
+#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK		(1 << 7)
 
 /* Used by CM_PER_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_MMC_FCLK_MASK		(1 << 3)
 
 /* Used by CM_MPU_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT		2
+#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_MPU_CLK_MASK			(1 << 2)
 
 /* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK		(1 << 4)
 
 /* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT		5
+#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK		(1 << 5)
 
 /* Used by CM_RTC_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK		(1 << 9)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT		25
+#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_SPI_GCLK_MASK		(1 << 25)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT		3
+#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK		(1 << 3)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT		10
+#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK		(1 << 10)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT		13
+#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK		(1 << 13)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT		14
+#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK		(1 << 14)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT		15
+#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK		(1 << 15)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT		16
+#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK		(1 << 16)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT		27
+#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK		(1 << 27)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT		28
+#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK		(1 << 28)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT		13
+#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK		(1 << 13)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT		12
+#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_PER_L4LS_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT		10
+#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_UART_GFCLK_MASK		(1 << 10)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT		9
+#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK		(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT		4
+#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH		1
 #define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK		(1 << 4)
 
 /* Used by CLKSEL_GFX_FCLK */
 #define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT		0
+#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH		1
 #define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK			(1 << 0)
 
 /* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2DIV_SHIFT				3
-#define AM33XX_CLKOUT2DIV_MASK				(0x05 << 3)
+#define AM33XX_CLKOUT2DIV_WIDTH				3
+#define AM33XX_CLKOUT2DIV_MASK				(0x7 << 3)
 
 /* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2EN_SHIFT				7
+#define AM33XX_CLKOUT2EN_WIDTH				1
 #define AM33XX_CLKOUT2EN_MASK				(1 << 7)
 
 /* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2SOURCE_SHIFT			0
-#define AM33XX_CLKOUT2SOURCE_MASK			(0x02 << 0)
+#define AM33XX_CLKOUT2SOURCE_WIDTH			3
+#define AM33XX_CLKOUT2SOURCE_MASK			(0x7 << 0)
 
 /*
  * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
@@ -289,6 +354,7 @@
  * CLKSEL_TIMER7_CLK
  */
 #define AM33XX_CLKSEL_SHIFT				0
+#define AM33XX_CLKSEL_WIDTH				1
 #define AM33XX_CLKSEL_MASK				(0x01 << 0)
 
 /*
@@ -296,17 +362,21 @@
  * CM_CPTS_RFT_CLKSEL
  */
 #define AM33XX_CLKSEL_0_0_SHIFT				0
+#define AM33XX_CLKSEL_0_0_WIDTH				1
 #define AM33XX_CLKSEL_0_0_MASK				(1 << 0)
 
 #define AM33XX_CLKSEL_0_1_SHIFT				0
+#define AM33XX_CLKSEL_0_1_WIDTH				2
 #define AM33XX_CLKSEL_0_1_MASK				(3 << 0)
 
 /* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
 #define AM33XX_CLKSEL_0_2_SHIFT				0
+#define AM33XX_CLKSEL_0_2_WIDTH				3
 #define AM33XX_CLKSEL_0_2_MASK				(7 << 0)
 
 /* Used by CLKSEL_GFX_FCLK */
 #define AM33XX_CLKSEL_GFX_FCLK_SHIFT			1
+#define AM33XX_CLKSEL_GFX_FCLK_WIDTH			1
 #define AM33XX_CLKSEL_GFX_FCLK_MASK			(1 << 1)
 
 /*
@@ -318,6 +388,7 @@
  * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
  */
 #define AM33XX_CLKTRCTRL_SHIFT				0
+#define AM33XX_CLKTRCTRL_WIDTH				2
 #define AM33XX_CLKTRCTRL_MASK				(0x3 << 0)
 
 /*
@@ -326,34 +397,42 @@
  * CM_SSC_DELTAMSTEP_DPLL_PER
  */
 #define AM33XX_DELTAMSTEP_SHIFT				0
-#define AM33XX_DELTAMSTEP_MASK				(0x19 << 0)
+#define AM33XX_DELTAMSTEP_WIDTH				20
+#define AM33XX_DELTAMSTEP_MASK				(0xfffff << 0)
 
 /* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
 #define AM33XX_DPLL_BYP_CLKSEL_SHIFT			23
+#define AM33XX_DPLL_BYP_CLKSEL_WIDTH			1
 #define AM33XX_DPLL_BYP_CLKSEL_MASK			(1 << 23)
 
 /* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT		8
+#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH		1
 #define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT		12
+#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH		1
 #define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK			(1 << 12)
 
 /* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
 #define AM33XX_DPLL_CLKOUT_DIV_SHIFT			0
+#define AM33XX_DPLL_CLKOUT_DIV_WIDTH			5
 #define AM33XX_DPLL_CLKOUT_DIV_MASK			(0x1f << 0)
 
 /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
 #define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT		0
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x06 << 0)
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH		7
+#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
 
 /* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT		5
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH		1
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK		(1 << 5)
 
 /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT	7
+#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH	1
 #define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK		(1 << 7)
 
 /*
@@ -361,6 +440,7 @@
  * CM_DIV_M2_DPLL_PER
  */
 #define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT		8
+#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH		1
 #define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK		(1 << 8)
 
 /*
@@ -368,19 +448,22 @@
  * CM_CLKSEL_DPLL_MPU
  */
 #define AM33XX_DPLL_DIV_SHIFT				0
+#define AM33XX_DPLL_DIV_WIDTH				7
 #define AM33XX_DPLL_DIV_MASK				(0x7f << 0)
 
 #define AM33XX_DPLL_PER_DIV_MASK			(0xff << 0)
 
 /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
 #define AM33XX_DPLL_DIV_0_7_SHIFT			0
-#define AM33XX_DPLL_DIV_0_7_MASK			(0x07 << 0)
+#define AM33XX_DPLL_DIV_0_7_WIDTH			8
+#define AM33XX_DPLL_DIV_0_7_MASK			(0xff << 0)
 
 /*
  * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
  * CM_CLKMODE_DPLL_MPU
  */
 #define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT			8
+#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH			1
 #define AM33XX_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
 
 /*
@@ -388,6 +471,7 @@
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_EN_SHIFT				0
+#define AM33XX_DPLL_EN_WIDTH				3
 #define AM33XX_DPLL_EN_MASK				(0x7 << 0)
 
 /*
@@ -395,6 +479,7 @@
  * CM_CLKMODE_DPLL_MPU
  */
 #define AM33XX_DPLL_LPMODE_EN_SHIFT			10
+#define AM33XX_DPLL_LPMODE_EN_WIDTH			1
 #define AM33XX_DPLL_LPMODE_EN_MASK			(1 << 10)
 
 /*
@@ -402,10 +487,12 @@
  * CM_CLKSEL_DPLL_MPU
  */
 #define AM33XX_DPLL_MULT_SHIFT				8
+#define AM33XX_DPLL_MULT_WIDTH				11
 #define AM33XX_DPLL_MULT_MASK				(0x7ff << 8)
 
 /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
 #define AM33XX_DPLL_MULT_PERIPH_SHIFT			8
+#define AM33XX_DPLL_MULT_PERIPH_WIDTH			12
 #define AM33XX_DPLL_MULT_PERIPH_MASK			(0xfff << 8)
 
 /*
@@ -413,17 +500,20 @@
  * CM_CLKMODE_DPLL_MPU
  */
 #define AM33XX_DPLL_REGM4XEN_SHIFT			11
+#define AM33XX_DPLL_REGM4XEN_WIDTH			1
 #define AM33XX_DPLL_REGM4XEN_MASK			(1 << 11)
 
 /* Used by CM_CLKSEL_DPLL_PERIPH */
 #define AM33XX_DPLL_SD_DIV_SHIFT			24
-#define AM33XX_DPLL_SD_DIV_MASK				(24, 31)
+#define AM33XX_DPLL_SD_DIV_WIDTH			8
+#define AM33XX_DPLL_SD_DIV_MASK				(0xff << 24)
 
 /*
  * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_SSC_ACK_SHIFT			13
+#define AM33XX_DPLL_SSC_ACK_WIDTH			1
 #define AM33XX_DPLL_SSC_ACK_MASK			(1 << 13)
 
 /*
@@ -431,6 +521,7 @@
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT		14
+#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH		1
 #define AM33XX_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
 
 /*
@@ -438,54 +529,67 @@
  * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define AM33XX_DPLL_SSC_EN_SHIFT			12
+#define AM33XX_DPLL_SSC_EN_WIDTH			1
 #define AM33XX_DPLL_SSC_EN_MASK				(1 << 12)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH		5
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK		(0x1f << 0)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH	1
 #define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK		(1 << 12)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT		0
+#define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH		5
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK		(0x1f << 0)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH	1
 #define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK		(1 << 12)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT		0
-#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x04 << 0)
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH		5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x1f << 0)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
+#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT	8
+#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH	1
 #define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT		12
+#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH		1
 #define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK		(1 << 12)
 
 /*
@@ -522,11 +626,12 @@
  * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
  */
 #define AM33XX_IDLEST_SHIFT				16
+#define AM33XX_IDLEST_WIDTH				2
 #define AM33XX_IDLEST_MASK				(0x3 << 16)
-#define AM33XX_IDLEST_VAL				0x3
 
 /* Used by CM_MAC_CLKSEL */
 #define AM33XX_MII_CLK_SEL_SHIFT			2
+#define AM33XX_MII_CLK_SEL_WIDTH			1
 #define AM33XX_MII_CLK_SEL_MASK				(1 << 2)
 
 /*
@@ -535,7 +640,8 @@
  * CM_SSC_MODFREQDIV_DPLL_PER
  */
 #define AM33XX_MODFREQDIV_EXPONENT_SHIFT		8
-#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x10 << 8)
+#define AM33XX_MODFREQDIV_EXPONENT_WIDTH		3
+#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
 
 /*
  * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
@@ -543,7 +649,8 @@
  * CM_SSC_MODFREQDIV_DPLL_PER
  */
 #define AM33XX_MODFREQDIV_MANTISSA_SHIFT		0
-#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x06 << 0)
+#define AM33XX_MODFREQDIV_MANTISSA_WIDTH		7
+#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
 
 /*
  * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
@@ -580,42 +687,52 @@
  * CM_CEFUSE_CEFUSE_CLKCTRL
  */
 #define AM33XX_MODULEMODE_SHIFT				0
+#define AM33XX_MODULEMODE_WIDTH				2
 #define AM33XX_MODULEMODE_MASK				(0x3 << 0)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT			30
+#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH			1
 #define AM33XX_OPTCLK_DEBUG_CLKA_MASK			(1 << 30)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT		19
+#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK			(1 << 19)
 
 /* Used by CM_WKUP_GPIO0_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO1_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO2_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO3_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO4_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO5_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK		(1 << 18)
 
 /* Used by CM_PER_GPIO6_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT		18
+#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH		1
 #define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK		(1 << 18)
 
 /*
@@ -627,25 +744,30 @@
  * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
  */
 #define AM33XX_STBYST_SHIFT				18
+#define AM33XX_STBYST_WIDTH				1
 #define AM33XX_STBYST_MASK				(1 << 18)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKDIVSEL_SHIFT			27
-#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x29 << 27)
+#define AM33XX_STM_PMD_CLKDIVSEL_WIDTH			3
+#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x7 << 27)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKSEL_SHIFT			22
-#define AM33XX_STM_PMD_CLKSEL_MASK			(0x23 << 22)
+#define AM33XX_STM_PMD_CLKSEL_WIDTH			2
+#define AM33XX_STM_PMD_CLKSEL_MASK			(0x3 << 22)
 
 /*
  * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
  * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
  */
 #define AM33XX_ST_DPLL_CLK_SHIFT			0
+#define AM33XX_ST_DPLL_CLK_WIDTH			1
 #define AM33XX_ST_DPLL_CLK_MASK				(1 << 0)
 
 /* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT			8
+#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH			1
 #define AM33XX_ST_DPLL_CLKDCOLDO_MASK			(1 << 8)
 
 /*
@@ -653,18 +775,22 @@
  * CM_DIV_M2_DPLL_PER
  */
 #define AM33XX_ST_DPLL_CLKOUT_SHIFT			9
+#define AM33XX_ST_DPLL_CLKOUT_WIDTH			1
 #define AM33XX_ST_DPLL_CLKOUT_MASK			(1 << 9)
 
 /* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH		1
 #define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK		(1 << 9)
 
 /* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH		1
 #define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK		(1 << 9)
 
 /* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT		9
+#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH		1
 #define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK		(1 << 9)
 
 /*
@@ -672,16 +798,20 @@
  * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
  */
 #define AM33XX_ST_MN_BYPASS_SHIFT			8
+#define AM33XX_ST_MN_BYPASS_WIDTH			1
 #define AM33XX_ST_MN_BYPASS_MASK			(1 << 8)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT			24
-#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x26 << 24)
+#define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH			3
+#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x7 << 24)
 
 /* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKSEL_SHIFT			20
-#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x21 << 20)
+#define AM33XX_TRC_PMD_CLKSEL_WIDTH			2
+#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x3 << 20)
 
 /* Used by CONTROL_SEC_CLK_CTRL */
+#define AM33XX_TIMER0_CLKSEL_WIDTH			2
 #define AM33XX_TIMER0_CLKSEL_MASK			(0x3 << 4)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 766338fe4d34..59598ffd8783 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -67,6 +67,7 @@
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2_SHIFT				0
 #define OMAP3430_ST_IVA2_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
@@ -217,6 +218,8 @@
 #define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_ST_OMAPCTRL_SHIFT			6
 #define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
+#define OMAP3430_ST_SAD2D_SHIFT				3
+#define OMAP3430_ST_SAD2D_MASK				(1 << 3)
 #define OMAP3430_ST_SDMA_SHIFT				2
 #define OMAP3430_ST_SDMA_MASK				(1 << 2)
 #define OMAP3430_ST_SDRC_SHIFT				1
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 65597a745638..4c6c2f7de65b 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -1,7 +1,7 @@
 /*
  * OMAP44xx Clock Management register bits
  *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
  * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
@@ -24,6 +24,7 @@
 
 /* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
 #define OMAP4430_ABE_DYNDEP_SHIFT				3
+#define OMAP4430_ABE_DYNDEP_WIDTH				0x1
 #define OMAP4430_ABE_DYNDEP_MASK				(1 << 3)
 
 /*
@@ -31,14 +32,17 @@
  * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_ABE_STATDEP_SHIFT				3
+#define OMAP4430_ABE_STATDEP_WIDTH				0x1
 #define OMAP4430_ABE_STATDEP_MASK				(1 << 3)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
+#define OMAP4430_ALWONCORE_DYNDEP_WIDTH				0x1
 #define OMAP4430_ALWONCORE_DYNDEP_MASK				(1 << 16)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
 #define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
+#define OMAP4430_ALWONCORE_STATDEP_WIDTH			0x1
 #define OMAP4430_ALWONCORE_STATDEP_MASK				(1 << 16)
 
 /*
@@ -47,294 +51,367 @@
  * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
  */
 #define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
+#define OMAP4430_AUTO_DPLL_MODE_WIDTH				0x3
 #define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
+#define OMAP4430_CEFUSE_DYNDEP_WIDTH				0x1
 #define OMAP4430_CEFUSE_DYNDEP_MASK				(1 << 17)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
 #define OMAP4430_CEFUSE_STATDEP_SHIFT				17
+#define OMAP4430_CEFUSE_STATDEP_WIDTH				0x1
 #define OMAP4430_CEFUSE_STATDEP_MASK				(1 << 17)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			(1 << 13)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		(1 << 12)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			(1 << 9)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			(1 << 11)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			(1 << 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			(1 << 11)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		(1 << 12)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		(1 << 13)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		(1 << 9)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_EMU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		(1 << 9)
 
 /* Used by CM_L4CFG_CLKSTCTRL */
 #define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT		9
+#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_WIDTH		0x1
 #define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		(1 << 9)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_DLL_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			(1 << 11)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			(1 << 12)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			(1 << 13)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			(1 << 14)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		(1 << 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			(1 << 9)
 
 /* Used by CM_DUCATI_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			(1 << 8)
 
 /* Used by CM_EMU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			(1 << 8)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		(1 << 15)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		(1 << 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		(1 << 20)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			(1 << 26)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		(1 << 21)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			(1 << 27)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		(1 << 13)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		(1 << 28)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		(1 << 29)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		(1 << 16)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		(1 << 17)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		(1 << 18)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		(1 << 19)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			(1 << 8)
 
 /* Used by CM_IVAHD_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK		(1 << 10)
 
 /* Used by CM_L3_1_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3_2_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			(1 << 8)
 
 /* Used by CM_SDMA_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			(1 << 8)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			(1 << 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			(1 << 8)
 
 /* Used by CM_GFX_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3INSTR_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		(1 << 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			(1 << 8)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_L4CFG_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			(1 << 12)
 
 /* Used by CM_MPU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			(1 << 8)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		(1 << 16)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			(1 << 17)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			(1 << 18)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			(1 << 19)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		(1 << 25)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		(1 << 20)
 
 /* Used by CM_L4PER_CLKSTCTRL */
@@ -343,94 +420,114 @@
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		(1 << 22)
 
 /* Used by CM_L4PER_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			(1 << 24)
 
 /* Used by CM_MEMIF_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			(1 << 10)
 
 /* Used by CM_GFX_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		(1 << 11)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			(1 << 10)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
+#define OMAP4430_CLKACTIVITY_SYS_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			(1 << 8)
 
 /* Used by CM_TESLA_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		(1 << 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			(1 << 22)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			(1 << 23)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			(1 << 24)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK		(1 << 10)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT			14
+#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK			(1 << 14)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		(1 << 15)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_WIDTH			0x1
 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			(1 << 30)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		(1 << 25)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_WIDTH		0x1
 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT		13
+#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_WIDTH		0x1
 #define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK			(1 << 13)
 
 /*
  * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
  * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
  * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
  * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL
  */
 #define OMAP4430_CLKSEL_SHIFT					24
+#define OMAP4430_CLKSEL_WIDTH					0x1
 #define OMAP4430_CLKSEL_MASK					(1 << 24)
 
 /*
@@ -438,50 +535,62 @@
  * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL
  */
 #define OMAP4430_CLKSEL_0_0_SHIFT				0
+#define OMAP4430_CLKSEL_0_0_WIDTH				0x1
 #define OMAP4430_CLKSEL_0_0_MASK				(1 << 0)
 
 /* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
 #define OMAP4430_CLKSEL_0_1_SHIFT				0
+#define OMAP4430_CLKSEL_0_1_WIDTH				0x2
 #define OMAP4430_CLKSEL_0_1_MASK				(0x3 << 0)
 
 /* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
 #define OMAP4430_CLKSEL_24_25_SHIFT				24
+#define OMAP4430_CLKSEL_24_25_WIDTH				0x2
 #define OMAP4430_CLKSEL_24_25_MASK				(0x3 << 24)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_CLKSEL_60M_SHIFT				24
+#define OMAP4430_CLKSEL_60M_WIDTH				0x1
 #define OMAP4430_CLKSEL_60M_MASK				(1 << 24)
 
 /* Used by CM_MPU_MPU_CLKCTRL */
 #define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT			25
+#define OMAP4460_CLKSEL_ABE_DIV_MODE_WIDTH			0x1
 #define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK			(1 << 25)
 
 /* Used by CM1_ABE_AESS_CLKCTRL */
 #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
+#define OMAP4430_CLKSEL_AESS_FCLK_WIDTH				0x1
 #define OMAP4430_CLKSEL_AESS_FCLK_MASK				(1 << 24)
 
 /* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_CORE_SHIFT				0
+#define OMAP4430_CLKSEL_CORE_WIDTH				0x1
 #define OMAP4430_CLKSEL_CORE_MASK				(1 << 0)
 
 /* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
+#define OMAP4430_CLKSEL_CORE_1_1_WIDTH				0x1
 #define OMAP4430_CLKSEL_CORE_1_1_MASK				(1 << 1)
 
 /* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_CLKSEL_DIV_SHIFT				24
+#define OMAP4430_CLKSEL_DIV_WIDTH				0x1
 #define OMAP4430_CLKSEL_DIV_MASK				(1 << 24)
 
 /* Used by CM_MPU_MPU_CLKCTRL */
 #define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT			24
+#define OMAP4460_CLKSEL_EMIF_DIV_MODE_WIDTH			0x1
 #define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK			(1 << 24)
 
 /* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP4430_CLKSEL_FCLK_SHIFT				24
+#define OMAP4430_CLKSEL_FCLK_WIDTH				0x2
 #define OMAP4430_CLKSEL_FCLK_MASK				(0x3 << 24)
 
 /* Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH			0x1
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			(1 << 25)
 
 /*
@@ -490,34 +599,42 @@
  * CM1_ABE_MCBSP3_CLKCTRL
  */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_WIDTH	0x2
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	(0x3 << 26)
 
 /* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L3_SHIFT				4
+#define OMAP4430_CLKSEL_L3_WIDTH				0x1
 #define OMAP4430_CLKSEL_L3_MASK					(1 << 4)
 
 /* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
+#define OMAP4430_CLKSEL_L3_SHADOW_WIDTH				0x1
 #define OMAP4430_CLKSEL_L3_SHADOW_MASK				(1 << 2)
 
 /* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L4_SHIFT				8
+#define OMAP4430_CLKSEL_L4_WIDTH				0x1
 #define OMAP4430_CLKSEL_L4_MASK					(1 << 8)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_CLKSEL_OPP_SHIFT				0
+#define OMAP4430_CLKSEL_OPP_WIDTH				0x2
 #define OMAP4430_CLKSEL_OPP_MASK				(0x3 << 0)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
+#define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH			0x3
 #define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			(0x7 << 27)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_WIDTH			0x3
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
 
 /* Used by CM_GFX_GFX_CLKCTRL */
 #define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
+#define OMAP4430_CLKSEL_SGX_FCLK_WIDTH				0x1
 #define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
 
 /*
@@ -525,18 +642,22 @@
  * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
  */
 #define OMAP4430_CLKSEL_SOURCE_SHIFT				24
+#define OMAP4430_CLKSEL_SOURCE_WIDTH				0x2
 #define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
 
 /* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
+#define OMAP4430_CLKSEL_SOURCE_24_24_WIDTH			0x1
 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
+#define OMAP4430_CLKSEL_UTMI_P1_WIDTH				0x1
 #define OMAP4430_CLKSEL_UTMI_P1_MASK				(1 << 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
+#define OMAP4430_CLKSEL_UTMI_P2_WIDTH				0x1
 #define OMAP4430_CLKSEL_UTMI_P2_MASK				(1 << 25)
 
 /*
@@ -549,30 +670,37 @@
  * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL
  */
 #define OMAP4430_CLKTRCTRL_SHIFT				0
+#define OMAP4430_CLKTRCTRL_WIDTH				0x2
 #define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
+#define OMAP4430_CORE_DPLL_EMU_DIV_WIDTH			0x7
 #define OMAP4430_CORE_DPLL_EMU_DIV_MASK				(0x7f << 0)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
+#define OMAP4430_CORE_DPLL_EMU_MULT_WIDTH			0xb
 #define OMAP4430_CORE_DPLL_EMU_MULT_MASK			(0x7ff << 8)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_CUSTOM_SHIFT					6
+#define OMAP4430_CUSTOM_WIDTH					0x2
 #define OMAP4430_CUSTOM_MASK					(0x3 << 6)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_D2D_DYNDEP_SHIFT				18
+#define OMAP4430_D2D_DYNDEP_WIDTH				0x1
 #define OMAP4430_D2D_DYNDEP_MASK				(1 << 18)
 
 /* Used by CM_MPU_STATICDEP */
 #define OMAP4430_D2D_STATDEP_SHIFT				18
+#define OMAP4430_D2D_STATDEP_WIDTH				0x1
 #define OMAP4430_D2D_STATDEP_MASK				(1 << 18)
 
 /* Used by CM_CLKSEL_DPLL_MPU */
 #define OMAP4460_DCC_COUNT_MAX_SHIFT				24
+#define OMAP4460_DCC_COUNT_MAX_WIDTH				0x8
 #define OMAP4460_DCC_COUNT_MAX_MASK				(0xff << 24)
 
 /* Used by CM_CLKSEL_DPLL_MPU */
@@ -586,22 +714,27 @@
  * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB
  */
 #define OMAP4430_DELTAMSTEP_SHIFT				0
+#define OMAP4430_DELTAMSTEP_WIDTH				0x14
 #define OMAP4430_DELTAMSTEP_MASK				(0xfffff << 0)
 
 /* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
 #define OMAP4460_DELTAMSTEP_0_20_SHIFT				0
+#define OMAP4460_DELTAMSTEP_0_20_WIDTH				0x15
 #define OMAP4460_DELTAMSTEP_0_20_MASK				(0x1fffff << 0)
 
 /* Used by CM_DLL_CTRL */
 #define OMAP4430_DLL_OVERRIDE_SHIFT				0
+#define OMAP4430_DLL_OVERRIDE_WIDTH				0x1
 #define OMAP4430_DLL_OVERRIDE_MASK				(1 << 0)
 
 /* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DLL_OVERRIDE_2_2_SHIFT				2
+#define OMAP4430_DLL_OVERRIDE_2_2_WIDTH				0x1
 #define OMAP4430_DLL_OVERRIDE_2_2_MASK				(1 << 2)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DLL_RESET_SHIFT				3
+#define OMAP4430_DLL_RESET_WIDTH				0x1
 #define OMAP4430_DLL_RESET_MASK					(1 << 3)
 
 /*
@@ -610,30 +743,37 @@
  * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB
  */
 #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
+#define OMAP4430_DPLL_BYP_CLKSEL_WIDTH				0x1
 #define OMAP4430_DPLL_BYP_CLKSEL_MASK				(1 << 23)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			(1 << 8)
 
 /* Used by CM_CLKSEL_DPLL_CORE */
 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			(1 << 20)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_WIDTH			0x5
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			(1 << 5)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			(1 << 8)
 
 /* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
 
 /*
@@ -641,10 +781,12 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
+#define OMAP4430_DPLL_CLKOUT_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
 
 /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_WIDTH			0x7
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
 
 /*
@@ -652,10 +794,12 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			(1 << 5)
 
 /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_WIDTH		0x1
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		(1 << 7)
 
 /*
@@ -663,18 +807,22 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
  */
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
+#define OMAP4430_DPLL_CORE_DPLL_EN_WIDTH			0x3
 #define OMAP4430_DPLL_CORE_DPLL_EN_MASK				(0x7 << 8)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
+#define OMAP4430_DPLL_CORE_M2_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CORE_M2_DIV_MASK				(0x1f << 11)
 
 /* Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
+#define OMAP4430_DPLL_CORE_M5_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CORE_M5_DIV_MASK				(0x1f << 3)
 
 /*
@@ -683,10 +831,12 @@
  * CM_CLKSEL_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_DIV_SHIFT					0
+#define OMAP4430_DPLL_DIV_WIDTH					0x7
 #define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
 
 /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_DIV_0_7_SHIFT				0
+#define OMAP4430_DPLL_DIV_0_7_WIDTH				0x8
 #define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
 
 /*
@@ -694,10 +844,12 @@
  * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
+#define OMAP4430_DPLL_DRIFTGUARD_EN_WIDTH			0x1
 #define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
 
 /* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_WIDTH			0x1
 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			(1 << 3)
 
 /*
@@ -706,6 +858,7 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_EN_SHIFT					0
+#define OMAP4430_DPLL_EN_WIDTH					0x3
 #define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
 
 /*
@@ -714,6 +867,7 @@
  * CM_CLKMODE_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
+#define OMAP4430_DPLL_LPMODE_EN_WIDTH				0x1
 #define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
 
 /*
@@ -722,10 +876,12 @@
  * CM_CLKSEL_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_MULT_SHIFT				8
+#define OMAP4430_DPLL_MULT_WIDTH				0xb
 #define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
 
 /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_MULT_USB_SHIFT				8
+#define OMAP4430_DPLL_MULT_USB_WIDTH				0xc
 #define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
 
 /*
@@ -734,10 +890,12 @@
  * CM_CLKMODE_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_REGM4XEN_SHIFT				11
+#define OMAP4430_DPLL_REGM4XEN_WIDTH				0x1
 #define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
 
 /* Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_SD_DIV_SHIFT				24
+#define OMAP4430_DPLL_SD_DIV_WIDTH				0x8
 #define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
 
 /*
@@ -746,6 +904,7 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_ACK_SHIFT				13
+#define OMAP4430_DPLL_SSC_ACK_WIDTH				0x1
 #define OMAP4430_DPLL_SSC_ACK_MASK				(1 << 13)
 
 /*
@@ -754,6 +913,7 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_WIDTH			0x1
 #define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
 
 /*
@@ -762,42 +922,52 @@
  * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_EN_SHIFT				12
+#define OMAP4430_DPLL_SSC_EN_WIDTH				0x1
 #define OMAP4430_DPLL_SSC_EN_MASK				(1 << 12)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
 #define OMAP4430_DSS_DYNDEP_SHIFT				8
+#define OMAP4430_DSS_DYNDEP_WIDTH				0x1
 #define OMAP4430_DSS_DYNDEP_MASK				(1 << 8)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DSS_STATDEP_SHIFT				8
+#define OMAP4430_DSS_STATDEP_WIDTH				0x1
 #define OMAP4430_DSS_STATDEP_MASK				(1 << 8)
 
 /* Used by CM_L3_2_DYNAMICDEP */
 #define OMAP4430_DUCATI_DYNDEP_SHIFT				0
+#define OMAP4430_DUCATI_DYNDEP_WIDTH				0x1
 #define OMAP4430_DUCATI_DYNDEP_MASK				(1 << 0)
 
 /* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DUCATI_STATDEP_SHIFT				0
+#define OMAP4430_DUCATI_STATDEP_WIDTH				0x1
 #define OMAP4430_DUCATI_STATDEP_MASK				(1 << 0)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1 */
 #define OMAP4430_FREQ_UPDATE_SHIFT				0
+#define OMAP4430_FREQ_UPDATE_WIDTH				0x1
 #define OMAP4430_FREQ_UPDATE_MASK				(1 << 0)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_FUNC_SHIFT					16
+#define OMAP4430_FUNC_WIDTH					0xc
 #define OMAP4430_FUNC_MASK					(0xfff << 16)
 
 /* Used by CM_L3_2_DYNAMICDEP */
 #define OMAP4430_GFX_DYNDEP_SHIFT				10
+#define OMAP4430_GFX_DYNDEP_WIDTH				0x1
 #define OMAP4430_GFX_DYNDEP_MASK				(1 << 10)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_GFX_STATDEP_SHIFT				10
+#define OMAP4430_GFX_STATDEP_WIDTH				0x1
 #define OMAP4430_GFX_STATDEP_MASK				(1 << 10)
 
 /* Used by CM_SHADOW_FREQ_CONFIG2 */
 #define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
+#define OMAP4430_GPMC_FREQ_UPDATE_WIDTH				0x1
 #define OMAP4430_GPMC_FREQ_UPDATE_MASK				(1 << 0)
 
 /*
@@ -805,6 +975,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
 
 /*
@@ -812,6 +983,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
 
 /*
@@ -819,6 +991,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
 
 /*
@@ -826,6 +999,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			(1 << 12)
 
 /*
@@ -833,6 +1007,7 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
 
 /*
@@ -840,6 +1015,7 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
 
 /*
@@ -847,6 +1023,7 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
 
 /*
@@ -854,38 +1031,47 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			(1 << 12)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			(1 << 12)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		(1 << 5)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_WIDTH		0x1
 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		(1 << 8)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_WIDTH			0x1
 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			(1 << 12)
 
 /*
@@ -893,53 +1079,48 @@
  * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
  * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
  * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
+ * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
+ * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
  * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
  * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
  * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
  * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
  * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
  * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
+ * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
+ * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
  * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
  * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
  * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
+ * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
  */
 #define OMAP4430_IDLEST_SHIFT					16
+#define OMAP4430_IDLEST_WIDTH					0x2
 #define OMAP4430_IDLEST_MASK					(0x3 << 16)
 
 /* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_ISS_DYNDEP_SHIFT				9
+#define OMAP4430_ISS_DYNDEP_WIDTH				0x1
 #define OMAP4430_ISS_DYNDEP_MASK				(1 << 9)
 
 /*
@@ -947,10 +1128,12 @@
  * CM_TESLA_STATICDEP
  */
 #define OMAP4430_ISS_STATDEP_SHIFT				9
+#define OMAP4430_ISS_STATDEP_WIDTH				0x1
 #define OMAP4430_ISS_STATDEP_MASK				(1 << 9)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
 #define OMAP4430_IVAHD_DYNDEP_SHIFT				2
+#define OMAP4430_IVAHD_DYNDEP_WIDTH				0x1
 #define OMAP4430_IVAHD_DYNDEP_MASK				(1 << 2)
 
 /*
@@ -959,10 +1142,12 @@
  * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_IVAHD_STATDEP_SHIFT				2
+#define OMAP4430_IVAHD_STATDEP_WIDTH				0x1
 #define OMAP4430_IVAHD_STATDEP_MASK				(1 << 2)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
 #define OMAP4430_L3INIT_DYNDEP_SHIFT				7
+#define OMAP4430_L3INIT_DYNDEP_WIDTH				0x1
 #define OMAP4430_L3INIT_DYNDEP_MASK				(1 << 7)
 
 /*
@@ -970,6 +1155,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3INIT_STATDEP_SHIFT				7
+#define OMAP4430_L3INIT_STATDEP_WIDTH				0x1
 #define OMAP4430_L3INIT_STATDEP_MASK				(1 << 7)
 
 /*
@@ -977,6 +1163,7 @@
  * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
 #define OMAP4430_L3_1_DYNDEP_SHIFT				5
+#define OMAP4430_L3_1_DYNDEP_WIDTH				0x1
 #define OMAP4430_L3_1_DYNDEP_MASK				(1 << 5)
 
 /*
@@ -986,6 +1173,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3_1_STATDEP_SHIFT				5
+#define OMAP4430_L3_1_STATDEP_WIDTH				0x1
 #define OMAP4430_L3_1_STATDEP_MASK				(1 << 5)
 
 /*
@@ -995,6 +1183,7 @@
  * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
  */
 #define OMAP4430_L3_2_DYNDEP_SHIFT				6
+#define OMAP4430_L3_2_DYNDEP_WIDTH				0x1
 #define OMAP4430_L3_2_DYNDEP_MASK				(1 << 6)
 
 /*
@@ -1004,10 +1193,12 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3_2_STATDEP_SHIFT				6
+#define OMAP4430_L3_2_STATDEP_WIDTH				0x1
 #define OMAP4430_L3_2_STATDEP_MASK				(1 << 6)
 
 /* Used by CM_L3_1_DYNAMICDEP */
 #define OMAP4430_L4CFG_DYNDEP_SHIFT				12
+#define OMAP4430_L4CFG_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4CFG_DYNDEP_MASK				(1 << 12)
 
 /*
@@ -1015,10 +1206,12 @@
  * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4CFG_STATDEP_SHIFT				12
+#define OMAP4430_L4CFG_STATDEP_WIDTH				0x1
 #define OMAP4430_L4CFG_STATDEP_MASK				(1 << 12)
 
 /* Used by CM_L3_2_DYNAMICDEP */
 #define OMAP4430_L4PER_DYNDEP_SHIFT				13
+#define OMAP4430_L4PER_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4PER_DYNDEP_MASK				(1 << 13)
 
 /*
@@ -1026,10 +1219,12 @@
  * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4PER_STATDEP_SHIFT				13
+#define OMAP4430_L4PER_STATDEP_WIDTH				0x1
 #define OMAP4430_L4PER_STATDEP_MASK				(1 << 13)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
 #define OMAP4430_L4SEC_DYNDEP_SHIFT				14
+#define OMAP4430_L4SEC_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4SEC_DYNDEP_MASK				(1 << 14)
 
 /*
@@ -1037,10 +1232,12 @@
  * CM_SDMA_STATICDEP
  */
 #define OMAP4430_L4SEC_STATDEP_SHIFT				14
+#define OMAP4430_L4SEC_STATDEP_WIDTH				0x1
 #define OMAP4430_L4SEC_STATDEP_MASK				(1 << 14)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
+#define OMAP4430_L4WKUP_DYNDEP_WIDTH				0x1
 #define OMAP4430_L4WKUP_DYNDEP_MASK				(1 << 15)
 
 /*
@@ -1048,6 +1245,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4WKUP_STATDEP_SHIFT				15
+#define OMAP4430_L4WKUP_STATDEP_WIDTH				0x1
 #define OMAP4430_L4WKUP_STATDEP_MASK				(1 << 15)
 
 /*
@@ -1055,6 +1253,7 @@
  * CM_MPU_DYNAMICDEP
  */
 #define OMAP4430_MEMIF_DYNDEP_SHIFT				4
+#define OMAP4430_MEMIF_DYNDEP_WIDTH				0x1
 #define OMAP4430_MEMIF_DYNDEP_MASK				(1 << 4)
 
 /*
@@ -1064,6 +1263,7 @@
  * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
  */
 #define OMAP4430_MEMIF_STATDEP_SHIFT				4
+#define OMAP4430_MEMIF_STATDEP_WIDTH				0x1
 #define OMAP4430_MEMIF_STATDEP_MASK				(1 << 4)
 
 /*
@@ -1073,6 +1273,7 @@
  * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
  */
 #define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
+#define OMAP4430_MODFREQDIV_EXPONENT_WIDTH			0x3
 #define OMAP4430_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
 
 /*
@@ -1082,6 +1283,7 @@
  * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
  */
 #define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
+#define OMAP4430_MODFREQDIV_MANTISSA_WIDTH			0x7
 #define OMAP4430_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
 
 /*
@@ -1089,69 +1291,68 @@
  * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
  * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
  * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
+ * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
+ * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
  * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
  * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
  * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
  * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
  * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
  * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
+ * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
+ * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
  * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
  * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
  * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
+ * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
+ * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
  */
 #define OMAP4430_MODULEMODE_SHIFT				0
+#define OMAP4430_MODULEMODE_WIDTH				0x2
 #define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4460_MPU_DYNDEP_SHIFT				19
+#define OMAP4460_MPU_DYNDEP_WIDTH				0x1
 #define OMAP4460_MPU_DYNDEP_MASK				(1 << 19)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			(1 << 9)
 
 /* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
+#define OMAP4430_OPTFCLKEN_BGAP_32K_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			(1 << 8)
 
 /* Used by CM_ALWON_USBPHY_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
+#define OMAP4430_OPTFCLKEN_CLK32K_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_CLK32K_MASK				(1 << 8)
 
 /* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_CTRLCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				(1 << 8)
 
 /*
@@ -1160,126 +1361,157 @@
  * CM_WKUP_GPIO1_CLKCTRL
  */
 #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_DBCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_DBCLK_MASK				(1 << 8)
 
 /* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_DLL_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				(1 << 8)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_DSSCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_DSSCLK_MASK				(1 << 8)
 
 /* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_FCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK_MASK				(1 << 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
+#define OMAP4430_OPTFCLKEN_FCLK0_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK0_MASK				(1 << 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
+#define OMAP4430_OPTFCLKEN_FCLK1_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK1_MASK				(1 << 9)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
+#define OMAP4430_OPTFCLKEN_FCLK2_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_FCLK2_MASK				(1 << 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			(1 << 15)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			(1 << 13)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			(1 << 14)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			(1 << 11)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			(1 << 12)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			(1 << 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
+#define OMAP4430_OPTFCLKEN_PHY_48M_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_PHY_48M_MASK				(1 << 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			(1 << 10)
 
 /* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_WIDTH		0x1
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		(1 << 11)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_SYS_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				(1 << 10)
 
 /* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT			8
+#define OMAP4460_OPTFCLKEN_TS_FCLK_WIDTH			0x1
 #define OMAP4460_OPTFCLKEN_TS_FCLK_MASK				(1 << 8)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
+#define OMAP4430_OPTFCLKEN_TV_CLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_TV_CLK_MASK				(1 << 11)
 
 /* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_WIDTH			0x1
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_XCLK_WIDTH				0x1
 #define OMAP4430_OPTFCLKEN_XCLK_MASK				(1 << 8)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
+#define OMAP4430_OVERRIDE_ENABLE_WIDTH				0x1
 #define OMAP4430_OVERRIDE_ENABLE_MASK				(1 << 19)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_PAD_CLKS_GATE_SHIFT				8
+#define OMAP4430_PAD_CLKS_GATE_WIDTH				0x1
 #define OMAP4430_PAD_CLKS_GATE_MASK				(1 << 8)
 
 /* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
 #define OMAP4430_PERF_CURRENT_SHIFT				0
+#define OMAP4430_PERF_CURRENT_WIDTH				0x8
 #define OMAP4430_PERF_CURRENT_MASK				(0xff << 0)
 
 /*
@@ -1288,74 +1520,85 @@
  * CM_IVA_DVFS_PERF_TESLA
  */
 #define OMAP4430_PERF_REQ_SHIFT					0
+#define OMAP4430_PERF_REQ_WIDTH					0x8
 #define OMAP4430_PERF_REQ_MASK					(0xff << 0)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE1_COMPLETED_SHIFT				0
+#define OMAP4430_PHASE1_COMPLETED_WIDTH				0x1
 #define OMAP4430_PHASE1_COMPLETED_MASK				(1 << 0)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
+#define OMAP4430_PHASE2A_COMPLETED_WIDTH			0x1
 #define OMAP4430_PHASE2A_COMPLETED_MASK				(1 << 1)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
+#define OMAP4430_PHASE2B_COMPLETED_WIDTH			0x1
 #define OMAP4430_PHASE2B_COMPLETED_MASK				(1 << 2)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
+#define OMAP4430_PMD_STM_MUX_CTRL_WIDTH				0x2
 #define OMAP4430_PMD_STM_MUX_CTRL_MASK				(0x3 << 20)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
+#define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH			0x2
 #define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			(0x3 << 22)
 
 /* Used by CM_DYN_DEP_PRESCAL */
 #define OMAP4430_PRESCAL_SHIFT					0
+#define OMAP4430_PRESCAL_WIDTH					0x6
 #define OMAP4430_PRESCAL_MASK					(0x3f << 0)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_R_RTL_SHIFT					11
+#define OMAP4430_R_RTL_WIDTH					0x5
 #define OMAP4430_R_RTL_MASK					(0x1f << 11)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_SAR_MODE_SHIFT					4
+#define OMAP4430_SAR_MODE_WIDTH					0x1
 #define OMAP4430_SAR_MODE_MASK					(1 << 4)
 
 /* Used by CM_SCALE_FCLK */
 #define OMAP4430_SCALE_FCLK_SHIFT				0
+#define OMAP4430_SCALE_FCLK_WIDTH				0x1
 #define OMAP4430_SCALE_FCLK_MASK				(1 << 0)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_SCHEME_SHIFT					30
+#define OMAP4430_SCHEME_WIDTH					0x2
 #define OMAP4430_SCHEME_MASK					(0x3 << 30)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_SDMA_DYNDEP_SHIFT				11
+#define OMAP4430_SDMA_DYNDEP_WIDTH				0x1
 #define OMAP4430_SDMA_DYNDEP_MASK				(1 << 11)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_SDMA_STATDEP_SHIFT				11
+#define OMAP4430_SDMA_STATDEP_WIDTH				0x1
 #define OMAP4430_SDMA_STATDEP_MASK				(1 << 11)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
+#define OMAP4430_SLIMBUS_CLK_GATE_WIDTH				0x1
 #define OMAP4430_SLIMBUS_CLK_GATE_MASK				(1 << 10)
 
 /*
  * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
  * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
  * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL,
+ * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL
  */
 #define OMAP4430_STBYST_SHIFT					18
+#define OMAP4430_STBYST_WIDTH					0x1
 #define OMAP4430_STBYST_MASK					(1 << 18)
 
 /*
@@ -1364,10 +1607,12 @@
  * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
  */
 #define OMAP4430_ST_DPLL_CLK_SHIFT				0
+#define OMAP4430_ST_DPLL_CLK_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
 #define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
+#define OMAP4430_ST_DPLL_CLKDCOLDO_WIDTH			0x1
 #define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				(1 << 9)
 
 /*
@@ -1375,14 +1620,17 @@
  * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
  */
 #define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
+#define OMAP4430_ST_DPLL_CLKOUT_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLKOUT_MASK				(1 << 9)
 
 /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
+#define OMAP4430_ST_DPLL_CLKOUTHIF_WIDTH			0x1
 #define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				(1 << 9)
 
 /* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
 #define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
+#define OMAP4430_ST_DPLL_CLKOUTX2_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLKOUTX2_MASK				(1 << 11)
 
 /*
@@ -1390,6 +1638,7 @@
  * CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			(1 << 9)
 
 /*
@@ -1397,14 +1646,17 @@
  * CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			(1 << 9)
 
 /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			(1 << 9)
 
 /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_WIDTH			0x1
 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			(1 << 9)
 
 /*
@@ -1413,18 +1665,22 @@
  * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
  */
 #define OMAP4430_ST_MN_BYPASS_SHIFT				8
+#define OMAP4430_ST_MN_BYPASS_WIDTH				0x1
 #define OMAP4430_ST_MN_BYPASS_MASK				(1 << 8)
 
 /* Used by CM_SYS_CLKSEL */
 #define OMAP4430_SYS_CLKSEL_SHIFT				0
+#define OMAP4430_SYS_CLKSEL_WIDTH				0x3
 #define OMAP4430_SYS_CLKSEL_MASK				(0x7 << 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
 #define OMAP4430_TESLA_DYNDEP_SHIFT				1
+#define OMAP4430_TESLA_DYNDEP_WIDTH				0x1
 #define OMAP4430_TESLA_DYNDEP_MASK				(1 << 1)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_TESLA_STATDEP_SHIFT				1
+#define OMAP4430_TESLA_STATDEP_WIDTH				0x1
 #define OMAP4430_TESLA_STATDEP_MASK				(1 << 1)
 
 /*
@@ -1433,13 +1689,16 @@
  * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
 #define OMAP4430_WINDOWSIZE_SHIFT				24
+#define OMAP4430_WINDOWSIZE_WIDTH				0x4
 #define OMAP4430_WINDOWSIZE_MASK				(0xf << 24)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_X_MAJOR_SHIFT					8
+#define OMAP4430_X_MAJOR_WIDTH					0x3
 #define OMAP4430_X_MAJOR_MASK					(0x7 << 8)
 
 /* Used by REVISION_CM1, REVISION_CM2 */
 #define OMAP4430_Y_MINOR_SHIFT					0
+#define OMAP4430_Y_MINOR_WIDTH					0x6
 #define OMAP4430_Y_MINOR_MASK					(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 389f9f8b570c..7f07ab02a5b3 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -18,8 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm.h"
@@ -36,7 +35,7 @@
 #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
 
 static const u8 cm_idlest_offs[] = {
-	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
 };
 
 u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index 088bbad73db5..57b2f3c2fbf3 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -71,6 +71,7 @@
 #define OMAP24XX_CM_FCLKEN2				0x0004
 #define OMAP24XX_CM_ICLKEN4				0x001c
 #define OMAP24XX_CM_AUTOIDLE4				0x003c
+#define OMAP24XX_CM_IDLEST4				0x002c
 
 #define OMAP2430_CM_IDLEST3				0x0028
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 14734746457c..48daac2581b4 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -24,9 +24,10 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/mcspi.h>
-#include <plat/nand.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
+#include "common.h"
 #include "common-board-devices.h"
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
@@ -35,16 +36,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +46,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
@@ -130,8 +120,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
 	}
 
 	if (nandcs > GPMC_CS_NUM) {
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				 "in GPMC\n ");
+		pr_info("NAND: Unable to find configuration in GPMC\n");
 		return;
 	}
 
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a6166b..a0b4a42836ab 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 069f9725b1c3..17950c6e130b 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,11 +17,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
-#include <plat/board.h>
-#include <plat/mux.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 1f65b1871c23..7045e4d61ac3 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -26,11 +26,18 @@
 #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
 #ifndef __ASSEMBLER__
 
+#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
-#include <plat/common.h>
+
 #include <asm/proc-fns.h>
 
+#include <plat/cpu.h>
+#include <plat/serial.h>
+#include <plat/common.h>
+
+#define OMAP_INTC_START		NR_IRQS
+
 #ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else
@@ -278,6 +285,11 @@ extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
+
+extern void omap4_cpu_die(unsigned int cpu);
+
+extern struct smp_operations omap4_smp_ops;
+
 extern void omap5_secondary_startup(void);
 #endif
 
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 3223b81e7532..d1ff8399a222 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/sdrc.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8cdc8531b60..a89e8256fd0e 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,12 +16,12 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
 #define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include "ctrl_module_core_44xx.h"
+#include "ctrl_module_wkup_44xx.h"
+#include "ctrl_module_pad_core_44xx.h"
+#include "ctrl_module_pad_wkup_44xx.h"
 
-#include <plat/am33xx.h>
+#include "am33xx.h"
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
@@ -354,6 +354,7 @@
 
 /* AM33XX CONTROL_STATUS bitfields (partial) */
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT		22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH		0x2
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK		(0x3 << 22)
 
 /* CONTROL OMAP STATUS register to identify OMAP3 features */
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index f2a49a48ef59..bc2756959be5 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -28,7 +28,6 @@
 #include <linux/cpu_pm.h>
 
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
 
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index ee05e193fc61..288bee6cbb76 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h
index 01970824e0e5..01970824e0e5 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
+++ b/arch/arm/mach-omap2/ctrl_module_core_44xx.h
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
index c88420de1151..c88420de1151 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
index 17c9b37042c0..17c9b37042c0 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
+++ b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h
index a0af9baec3f7..a0af9baec3f7 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
+++ b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h
diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h
new file mode 100644
index 000000000000..a4edbd2f7484
--- /dev/null
+++ b/arch/arm/mach-omap2/debug-devices.h
@@ -0,0 +1,9 @@
+#ifndef _OMAP_DEBUG_DEVICES_H
+#define _OMAP_DEBUG_DEVICES_H
+
+#include <linux/types.h>
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c00c68961bb8..c8c211731d26 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -17,21 +17,20 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
-#include <asm/pmu.h>
 
 #include "iomap.h"
-#include <plat/board.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
 
+#include "soc.h"
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
@@ -112,7 +111,7 @@ static struct resource omap2cam_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_24XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };
@@ -201,7 +200,7 @@ static struct resource omap3isp_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_34XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };
@@ -385,7 +384,7 @@ static inline void omap_init_hdmi_audio(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
@@ -434,37 +433,24 @@ static void omap_init_mcspi(void)
 static inline void omap_init_mcspi(void) {}
 #endif
 
-static struct resource omap2_pmu_resource = {
-	.start	= 3,
-	.end	= 3,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct resource omap3_pmu_resource = {
-	.start	= INT_34XX_BENCH_MPU_EMUL,
-	.end	= INT_34XX_BENCH_MPU_EMUL,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device omap_pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= 1,
-};
-
-static void omap_init_pmu(void)
+/**
+ * omap_init_rng - bind the RNG hwmod to the RNG omap_device
+ *
+ * Bind the RNG hwmod to the RNG omap_device.  No return value.
+ */
+static void omap_init_rng(void)
 {
-	if (cpu_is_omap24xx())
-		omap_pmu_device.resource = &omap2_pmu_resource;
-	else if (cpu_is_omap34xx())
-		omap_pmu_device.resource = &omap3_pmu_resource;
-	else
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+
+	oh = omap_hwmod_lookup("rng");
+	if (!oh)
 		return;
 
-	platform_device_register(&omap_pmu_device);
+	pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
 }
 
-
 #if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
 
 #ifdef CONFIG_ARCH_OMAP2
@@ -475,7 +461,7 @@ static struct resource omap2_sham_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_24XX_SHA1MD5,
+		.start	= 51 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -493,7 +479,7 @@ static struct resource omap3_sham_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_34XX_SHA1MD52_IRQ,
+		.start	= 49 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
@@ -631,6 +617,10 @@ static inline void omap_init_vout(void) {}
 
 static int __init omap2_init_devices(void)
 {
+	/* Enable dummy states for those platforms without pinctrl support */
+	if (!of_have_populated_dt())
+		pinctrl_provide_dummies();
+
 	/*
 	 * please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
@@ -645,8 +635,8 @@ static int __init omap2_init_devices(void)
 		omap_init_mcpdm();
 		omap_init_mcspi();
 	}
-	omap_init_pmu();
 	omap_init_sti();
+	omap_init_rng();
 	omap_init_sham();
 	omap_init_aes();
 	omap_init_vout();
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index af1ed7d24a1f..7012068ccbf6 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -76,14 +76,14 @@ struct omap_dss_hwmod_data {
 	const int id;
 };
 
-static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initdata = {
+static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initconst = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
 	{ "dss_venc", "omapdss_venc", -1 },
 };
 
-static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
+static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initconst = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
@@ -91,7 +91,7 @@ static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
 	{ "dss_dsi1", "omapdss_dsi", 0 },
 };
 
-static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
+static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
@@ -488,7 +488,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk)
-			clk_enable(oc->_clk);
+			clk_prepare_enable(oc->_clk);
 
 	dispc_disable_outputs();
 
@@ -515,7 +515,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk)
-			clk_disable(oc->_clk);
+			clk_disable_unprepare(oc->_clk);
 
 	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
 
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b9c8d2f6a81f..814e1808e158 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,9 +28,9 @@
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
@@ -63,8 +63,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	const struct dpll_data *dd;
 	int i = 0;
 	int ret = -EINVAL;
+	const char *clk_name;
 
 	dd = clk->dpll_data;
+	clk_name = __clk_get_name(clk);
 
 	state <<= __ffs(dd->idlest_mask);
 
@@ -76,10 +78,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 
 	if (i == MAX_DPLL_WAIT_TRIES) {
 		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
+		       clk_name, (state) ? "locked" : "bypassed");
 	} else {
 		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
+			 clk_name, (state) ? "locked" : "bypassed", i);
 
 		ret = 0;
 	}
@@ -93,7 +95,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->dpll_data->clk_ref->rate / n;
+	fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
 
 	pr_debug("clock: fint is %lu\n", fint);
 
@@ -140,7 +142,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 	u8 state = 1;
 	int r = 0;
 
-	pr_debug("clock: locking DPLL %s\n", clk->name);
+	pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
 
 	dd = clk->dpll_data;
 	state <<= __ffs(dd->idlest_mask);
@@ -187,7 +189,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
 		return -EINVAL;
 
 	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
+		 __clk_get_name(clk));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -217,7 +219,7 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
 		return -EINVAL;
 
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
+	pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -245,7 +247,7 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
 {
 	unsigned long fint, clkinp; /* watch out for overflow */
 
-	clkinp = clk->parent->rate;
+	clkinp = __clk_get_rate(__clk_get_parent(clk));
 	fint = (clkinp / n) * m;
 
 	if (fint < 1000000000)
@@ -271,7 +273,7 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
 	unsigned long clkinp, sd; /* watch out for overflow */
 	int mod1, mod2;
 
-	clkinp = clk->parent->rate;
+	clkinp = __clk_get_rate(__clk_get_parent(clk));
 
 	/*
 	 * target sigma-delta to near 250MHz
@@ -311,7 +313,7 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
 	 * Set jitter correction. No jitter correction for OMAP4 and 3630
 	 * since freqsel field is no longer present
 	 */
-	if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+	if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
 		v = __raw_readl(dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
@@ -380,16 +382,19 @@ int omap3_noncore_dpll_enable(struct clk *clk)
 {
 	int r;
 	struct dpll_data *dd;
+	struct clk *parent;
 
 	dd = clk->dpll_data;
 	if (!dd)
 		return -EINVAL;
 
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
+	parent = __clk_get_parent(clk);
+
+	if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
+		WARN_ON(parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
 	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
+		WARN_ON(parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
 	}
 	/*
@@ -432,7 +437,7 @@ void omap3_noncore_dpll_disable(struct clk *clk)
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk *new_parent = NULL;
-	unsigned long hw_rate;
+	unsigned long hw_rate, bypass_rate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -456,7 +461,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	omap2_clk_enable(dd->clk_bypass);
 	omap2_clk_enable(dd->clk_ref);
 
-	if (dd->clk_bypass->rate == rate &&
+	bypass_rate = __clk_get_rate(dd->clk_bypass);
+	if (bypass_rate == rate &&
 	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
 
@@ -471,7 +477,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 			return -EINVAL;
 
 		/* No freqsel on OMAP4 and OMAP3630 */
-		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			if (!freqsel)
@@ -479,7 +485,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 		}
 
 		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
+			 __clk_get_name(clk), rate);
 
 		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
 						 dd->last_rounded_n, freqsel);
@@ -557,7 +563,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
 
 	if (!dd->autoidle_reg) {
 		pr_debug("clock: DPLL %s: autoidle not supported\n",
-			clk->name);
+			__clk_get_name(clk));
 		return;
 	}
 
@@ -591,7 +597,7 @@ void omap3_dpll_deny_idle(struct clk *clk)
 
 	if (!dd->autoidle_reg) {
 		pr_debug("clock: DPLL %s: autoidle not supported\n",
-			clk->name);
+			__clk_get_name(clk));
 		return;
 	}
 
@@ -617,25 +623,30 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 	unsigned long rate;
 	u32 v;
 	struct clk *pclk;
+	unsigned long parent_rate;
 
 	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
+	pclk = __clk_get_parent(clk);
 	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
+		pclk = __clk_get_parent(pclk);
 
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return 0;
+	}
 
 	dd = pclk->dpll_data;
 
 	WARN_ON(!dd->enable_mask);
 
+	parent_rate = __clk_get_rate(__clk_get_parent(clk));
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
-		rate = clk->parent->rate;
+		rate = parent_rate;
 	else
-		rate = clk->parent->rate * 2;
+		rate = parent_rate * 2;
 	return rate;
 }
 
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 9c6a296b3dc3..09d0ccccb861 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,9 +15,9 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock44xx.h"
 #include "cm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index a636ebc16b39..98388109f22a 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -30,7 +30,7 @@
 #include <plat/omap-pm.h>
 #endif
 
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
 
 static struct platform_device *omap_dsp_pdev;
 
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index e28e761b7ab9..b3566f68a559 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -21,8 +21,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 
 MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9ad7d489b0de..d1058f16fb40 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -60,6 +61,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
 	if (!pdata->regs) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
+		kfree(pdata);
 		return -ENOMEM;
 	}
 
@@ -121,6 +123,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
+		kfree(pdata->regs);
 		kfree(pdata);
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 386dec8d2351..4acf497faeb3 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -13,23 +13,31 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include <asm/mach/flash.h>
 
-#include <plat/cpu.h>
-#include <plat/nand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
 
-static struct resource gpmc_nand_resource = {
-	.flags		= IORESOURCE_MEM,
+#include "soc.h"
+
+static struct resource gpmc_nand_resource[] = {
+	{
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device gpmc_nand_device = {
 	.name		= "omap2-nand",
 	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &gpmc_nand_resource,
+	.num_resources	= ARRAY_SIZE(gpmc_nand_resource),
+	.resource	= gpmc_nand_resource,
 };
 
 static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
@@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
 		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
 	gpmc_cs_configure(gpmc_nand_data->cs,
 			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
+	gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-				&gpmc_nand_data->phys_base);
+				(unsigned long *)&gpmc_nand_resource[0].start);
 	if (err < 0) {
 		dev_err(dev, "Cannot request GPMC CS\n");
 		return err;
 	}
 
+	gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
+							NAND_IO_SIZE - 1;
+
+	gpmc_nand_resource[1].start =
+				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+	gpmc_nand_resource[2].start =
+				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 	 /* Set timings in GPMC */
 	err = omap2_nand_gpmc_retime(gpmc_nand_data);
 	if (err < 0) {
@@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
 	}
 
+	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+
 	err = platform_device_register(&gpmc_nand_device);
 	if (err < 0) {
 		dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index a0fa9bb2bda5..916716e1da3b 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -15,19 +15,27 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include <asm/mach/flash.h>
 
-#include <plat/cpu.h>
-#include <plat/onenand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
 
+#include "soc.h"
+
+#define	ONENAND_IO_SIZE	SZ_128K
+
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 
+static struct resource gpmc_onenand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
 static struct platform_device gpmc_onenand_device = {
 	.name		= "omap2-onenand",
 	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &gpmc_onenand_resource,
 };
 
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
@@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 
 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
+	int err;
+
 	gpmc_onenand_data = _onenand_data;
 	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
 	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
@@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 	}
 
+	err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
+				(unsigned long *)&gpmc_onenand_resource.start);
+	if (err < 0) {
+		pr_err("%s: Cannot request GPMC CS\n", __func__);
+		return;
+	}
+
+	gpmc_onenand_resource.end = gpmc_onenand_resource.start +
+							ONENAND_IO_SIZE - 1;
+
 	if (platform_device_register(&gpmc_onenand_device) < 0) {
-		printk(KERN_ERR "Unable to register OneNAND device\n");
+		pr_err("%s: Unable to register OneNAND device\n", __func__);
+		gpmc_cs_free(gpmc_onenand_data->cs);
 		return;
 	}
 }
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index ba10c24f3d8d..565475310374 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,9 +17,10 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <plat/board.h>
 #include <plat/gpmc.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
+
+#include "soc.h"
 
 static struct omap_smc91x_platform_data *gpmc_cfg;
 
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h
index b64fbee4d567..b64fbee4d567 100644
--- a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+++ b/arch/arm/mach-omap2/gpmc-smc91x.h
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index b6c77be3e8f7..249a0b440cd6 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,9 +20,8 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 
-#include <plat/board.h>
 #include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
 
 static struct resource gpmc_smsc911x_resources[] = {
 	[0] = {
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
index ea6c9c88c725..ea6c9c88c725 100644
--- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.h
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index b2b5759ab0fe..8ab1e1bde5e9 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -24,11 +24,20 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>
 
+#include <plat/cpu.h>
+#include <plat/gpmc.h>
 #include <plat/sdrc.h>
+#include <plat/omap_device.h>
+
+#include "soc.h"
+#include "common.h"
+
+#define	DEVICE_NAME		"omap-gpmc"
 
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
@@ -78,6 +87,21 @@
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
 
+#define	GPMC_REVISION_MAJOR(l)		((l >> 4) & 0xf)
+#define	GPMC_REVISION_MINOR(l)		(l & 0xf)
+
+#define	GPMC_HAS_WR_ACCESS		0x1
+#define	GPMC_HAS_WR_DATA_MUX_BUS	0x2
+
+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define	GPMC_NR_IRQ		2
+
+struct gpmc_client_irq	{
+	unsigned		irq;
+	u32			bitmask;
+};
+
 /* Structure to save gpmc cs context */
 struct gpmc_cs_config {
 	u32 config1;
@@ -105,12 +129,19 @@ struct omap3_gpmc_regs {
 	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
 };
 
+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static unsigned gpmc_irq_start;
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
 static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
-
+static struct device *gpmc_dev;
+static int gpmc_irq;
+static resource_size_t phys_base, mem_size;
+static unsigned gpmc_capability;
 static void __iomem *gpmc_base;
 
 static struct clk *gpmc_l3_clk;
@@ -279,7 +310,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 
 	div = gpmc_cs_calc_divider(cs, t->sync_clk);
 	if (div < 0)
-		return -1;
+		return div;
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG2,  0,  3, cs_on);
 	GPMC_SET_ONE(GPMC_CS_CONFIG2,  8, 12, cs_rd_off);
@@ -300,10 +331,10 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
 
-	if (cpu_is_omap34xx()) {
+	if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
 		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+	if (gpmc_capability & GPMC_HAS_WR_ACCESS)
 		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
-	}
 
 	/* caller is expected to have initialized CONFIG1 to cover
 	 * at least sync vs async
@@ -413,6 +444,20 @@ static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
 	return r;
 }
 
+static int gpmc_cs_delete_mem(int cs)
+{
+	struct resource	*res = &gpmc_cs_mem[cs];
+	int r;
+
+	spin_lock(&gpmc_mem_lock);
+	r = release_resource(&gpmc_cs_mem[cs]);
+	res->start = 0;
+	res->end = 0;
+	spin_unlock(&gpmc_mem_lock);
+
+	return r;
+}
+
 int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 {
 	struct resource *res = &gpmc_cs_mem[cs];
@@ -682,7 +727,148 @@ int gpmc_prefetch_reset(int cs)
 }
 EXPORT_SYMBOL(gpmc_prefetch_reset);
 
-static void __init gpmc_mem_init(void)
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+	reg->gpmc_status = gpmc_base + GPMC_STATUS;
+	reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+	reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+	reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+	reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+	reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+	reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+	reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+	reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+	reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+	reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+	reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+	reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+}
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+	int i;
+
+	if (hweight32(irq_config) > 1)
+		return 0;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (gpmc_client_irq[i].bitmask & irq_config)
+			return gpmc_client_irq[i].irq;
+
+	return 0;
+}
+
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+	int i;
+	u32 regval;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (irq == gpmc_client_irq[i].irq) {
+			regval = gpmc_read_reg(GPMC_IRQENABLE);
+			if (endis)
+				regval |= gpmc_client_irq[i].bitmask;
+			else
+				regval &= ~gpmc_client_irq[i].bitmask;
+			gpmc_write_reg(GPMC_IRQENABLE, regval);
+			break;
+		}
+
+	return 0;
+}
+
+static void gpmc_irq_disable(struct irq_data *p)
+{
+	gpmc_irq_endis(p->irq, false);
+}
+
+static void gpmc_irq_enable(struct irq_data *p)
+{
+	gpmc_irq_endis(p->irq, true);
+}
+
+static void gpmc_irq_noop(struct irq_data *data) { }
+
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+
+static int gpmc_setup_irq(void)
+{
+	int i;
+	u32 regval;
+
+	if (!gpmc_irq)
+		return -EINVAL;
+
+	gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+	if (IS_ERR_VALUE(gpmc_irq_start)) {
+		pr_err("irq_alloc_descs failed\n");
+		return gpmc_irq_start;
+	}
+
+	gpmc_irq_chip.name = "gpmc";
+	gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+	gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+	gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+	gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+	gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+	gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+	gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+
+	gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+	gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++) {
+		gpmc_client_irq[i].irq = gpmc_irq_start + i;
+		irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+					&gpmc_irq_chip, handle_simple_irq);
+		set_irq_flags(gpmc_client_irq[i].irq,
+				IRQF_VALID | IRQF_NOAUTOEN);
+	}
+
+	/* Disable interrupts */
+	gpmc_write_reg(GPMC_IRQENABLE, 0);
+
+	/* clear interrupts */
+	regval = gpmc_read_reg(GPMC_IRQSTATUS);
+	gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+	return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
+
+static __exit int gpmc_free_irq(void)
+{
+	int i;
+
+	if (gpmc_irq)
+		free_irq(gpmc_irq, NULL);
+
+	for (i = 0; i < GPMC_NR_IRQ; i++) {
+		irq_set_handler(gpmc_client_irq[i].irq, NULL);
+		irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
+		irq_modify_status(gpmc_client_irq[i].irq, 0, 0);
+	}
+
+	irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
+
+	return 0;
+}
+
+static void __devexit gpmc_mem_exit(void)
+{
+	int cs;
+
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		if (!gpmc_cs_mem_enabled(cs))
+			continue;
+		gpmc_cs_delete_mem(cs);
+	}
+
+}
+
+static void __devinit gpmc_mem_init(void)
 {
 	int cs;
 	unsigned long boot_rom_space = 0;
@@ -709,83 +895,120 @@ static void __init gpmc_mem_init(void)
 	}
 }
 
-static int __init gpmc_init(void)
+static __devinit int gpmc_probe(struct platform_device *pdev)
 {
-	u32 l, irq;
-	int cs, ret = -EINVAL;
-	int gpmc_irq;
-	char *ck = NULL;
-
-	if (cpu_is_omap24xx()) {
-		ck = "core_l3_ck";
-		if (cpu_is_omap2420())
-			l = OMAP2420_GPMC_BASE;
-		else
-			l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap34xx()) {
-		ck = "gpmc_fck";
-		l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
-		/* Base address and irq number are same for OMAP4/5 */
-		ck = "gpmc_ck";
-		l = OMAP44XX_GPMC_BASE;
-		gpmc_irq = OMAP44XX_IRQ_GPMC;
+	u32 l;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -ENOENT;
+
+	phys_base = res->start;
+	mem_size = resource_size(res);
+
+	gpmc_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!gpmc_base) {
+		dev_err(&pdev->dev, "error: request memory / ioremap\n");
+		return -EADDRNOTAVAIL;
 	}
 
-	if (WARN_ON(!ck))
-		return ret;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL)
+		dev_warn(&pdev->dev, "Failed to get resource: irq\n");
+	else
+		gpmc_irq = res->start;
 
-	gpmc_l3_clk = clk_get(NULL, ck);
+	gpmc_l3_clk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(gpmc_l3_clk)) {
-		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
-		BUG();
+		dev_err(&pdev->dev, "error: clk_get\n");
+		gpmc_irq = 0;
+		return PTR_ERR(gpmc_l3_clk);
 	}
 
-	gpmc_base = ioremap(l, SZ_4K);
-	if (!gpmc_base) {
-		clk_put(gpmc_l3_clk);
-		printk(KERN_ERR "Could not get GPMC register memory\n");
-		BUG();
-	}
+	clk_prepare_enable(gpmc_l3_clk);
 
-	clk_enable(gpmc_l3_clk);
+	gpmc_dev = &pdev->dev;
 
 	l = gpmc_read_reg(GPMC_REVISION);
-	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
-	/* Set smart idle mode and automatic L3 clock gating */
-	l = gpmc_read_reg(GPMC_SYSCONFIG);
-	l &= 0x03 << 3;
-	l |= (0x02 << 3) | (1 << 0);
-	gpmc_write_reg(GPMC_SYSCONFIG, l);
+	if (GPMC_REVISION_MAJOR(l) > 0x4)
+		gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+	dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
+		 GPMC_REVISION_MINOR(l));
+
 	gpmc_mem_init();
 
-	/* initalize the irq_chained */
-	irq = OMAP_GPMC_IRQ_BASE;
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		irq_set_chip_and_handler(irq, &dummy_irq_chip,
-						handle_simple_irq);
-		set_irq_flags(irq, IRQF_VALID);
-		irq++;
-	}
+	if (IS_ERR_VALUE(gpmc_setup_irq()))
+		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+
+	return 0;
+}
+
+static __exit int gpmc_remove(struct platform_device *pdev)
+{
+	gpmc_free_irq();
+	gpmc_mem_exit();
+	gpmc_dev = NULL;
+	return 0;
+}
+
+static struct platform_driver gpmc_driver = {
+	.probe		= gpmc_probe,
+	.remove		= __devexit_p(gpmc_remove),
+	.driver		= {
+		.name	= DEVICE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
 
-	ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
-	if (ret)
-		pr_err("gpmc: irq-%d could not claim: err %d\n",
-						gpmc_irq, ret);
-	return ret;
+static __init int gpmc_init(void)
+{
+	return platform_driver_register(&gpmc_driver);
 }
+
+static __exit void gpmc_exit(void)
+{
+	platform_driver_unregister(&gpmc_driver);
+
+}
+
 postcore_initcall(gpmc_init);
+module_exit(gpmc_exit);
+
+static int __init omap_gpmc_init(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+	char *oh_name = "gpmc";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+}
+postcore_initcall(omap_gpmc_init);
 
 static irqreturn_t gpmc_handle_irq(int irq, void *dev)
 {
-	u8 cs;
+	int i;
+	u32 regval;
+
+	regval = gpmc_read_reg(GPMC_IRQSTATUS);
+
+	if (!regval)
+		return IRQ_NONE;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (regval & gpmc_client_irq[i].bitmask)
+			generic_handle_irq(gpmc_client_irq[i].irq);
 
-	/* check cs to invoke the irq */
-	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
-	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
-		generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+	gpmc_write_reg(GPMC_IRQSTATUS, regval);
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index cdd6dda03828..e003f2bba30c 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -29,7 +29,7 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
-#include <plat/hdq1w.h>
+#include "hdq1w.h"
 
 #include "common.h"
 
diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
index 0c1efc846d8d..0c1efc846d8d 100644
--- a/arch/arm/plat-omap/include/plat/hdq1w.h
+++ b/arch/arm/mach-omap2/hdq1w.h
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9675d8d1822..03ebf47cfa9a 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -15,9 +15,10 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
-#include <plat/mux.h>
 #include <plat/omap_device.h>
 
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index a12e224eb97d..fc57e67b321f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,7 +19,6 @@
  *
  */
 
-#include <plat/cpu.h>
 #include <plat/i2c.h>
 #include "common.h"
 #include <plat/omap_hwmod.h>
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 40373db649aa..cf2362ccb234 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -22,10 +22,10 @@
 #include <asm/cputype.h>
 
 #include "common.h"
-#include <plat/cpu.h>
 
-#include <mach/id.h>
+#include "id.h"
 
+#include "soc.h"
 #include "control.h"
 
 static unsigned int omap_revision;
@@ -161,9 +161,8 @@ void __init omap2xxx_check_revision(void)
 	}
 
 	if (j == ARRAY_SIZE(omap_ids)) {
-		printk(KERN_ERR "Unknown OMAP device type. "
-				"Handling it as OMAP%04x\n",
-				omap_ids[i].type >> 16);
+		pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
+		       omap_ids[i].type >> 16);
 		j = i;
 	}
 
diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/id.h
index 02ed3aa56f1e..02ed3aa56f1e 100644
--- a/arch/arm/mach-omap2/include/mach/id.h
+++ b/arch/arm/mach-omap2/id.h
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
index be4d290d57ee..5621cc59c9f4 100644
--- a/arch/arm/mach-omap2/include/mach/gpio.h
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap2/include/mach/gpio.h
  */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
index 78edf9d33f71..54492dbf6973 100644
--- a/arch/arm/mach-omap2/include/mach/hardware.h
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap2/include/mach/hardware.h
  */
-
-#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
index 44dab7725696..ba5282cafa42 100644
--- a/arch/arm/mach-omap2/include/mach/irqs.h
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap2/include/mach/irqs.h
  */
-
-#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h
deleted file mode 100644
index 323675f21b69..000000000000
--- a/arch/arm/mach-omap2/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4d2d981ff5c5..4234d28dc171 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,6 +33,7 @@
 #include <plat/multi.h>
 #include <plat/dma.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "voltage.h"
 #include "powerdomain.h"
@@ -523,6 +524,8 @@ void __init am33xx_init_early(void)
 	am33xx_voltagedomains_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
+	am33xx_hwmod_init();
+	omap_hwmod_init_postsetup();
 	am33xx_clk_init();
 }
 #endif
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index bcd83db41bbc..3926f370448f 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -23,8 +23,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 
-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 
@@ -49,6 +48,8 @@
 #define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
 #define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
 #define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
 
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt
@@ -107,9 +108,8 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	unsigned long tmp;
 
 	tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
-	printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
-			 "(revision %ld.%ld) with %d interrupts\n",
-			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+	pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n",
+		bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 
 	tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
 	tmp |= 1 << 1;	/* soft reset */
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h
index b8b5641379b0..b8b5641379b0 100644
--- a/arch/arm/plat-omap/include/plat/l3_2xxx.h
+++ b/arch/arm/mach-omap2/l3_2xxx.h
diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/mach-omap2/l3_3xxx.h
index cde1938c5f82..cde1938c5f82 100644
--- a/arch/arm/plat-omap/include/plat/l3_3xxx.h
+++ b/arch/arm/mach-omap2/l3_3xxx.h
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h
index 3f39cf8a35c6..3f39cf8a35c6 100644
--- a/arch/arm/plat-omap/include/plat/l4_2xxx.h
+++ b/arch/arm/mach-omap2/l4_2xxx.h
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/mach-omap2/l4_3xxx.h
index 881a858b1ffc..881a858b1ffc 100644
--- a/arch/arm/plat-omap/include/plat/l4_3xxx.h
+++ b/arch/arm/mach-omap2/l4_3xxx.h
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6875be837d9f..0d974565f8ca 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -16,8 +16,10 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
+
 #include <plat/mailbox.h>
-#include <mach/irqs.h>
+
+#include "soc.h"
 
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 577cb77db26c..7d47407d6d46 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,11 +17,9 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 
-#include <mach/irqs.h>
 #include <plat/dma.h>
-#include <plat/cpu.h>
-#include <plat/mcbsp.h>
 #include <plat/omap_device.h>
 #include <linux/pm_runtime.h>
 
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index fb5bc6cf3773..9e57b4aadb06 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -23,6 +23,7 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 471e62a74a16..76f9b3c2f586 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
  * @balls:	available balls on the package
- * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 414083b427df..e712d1725a8b 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -20,22 +20,17 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-wakeupgen.h"
 
 #include "common.h"
 
 #include "powerdomain.h"
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  * Called with IRQs disabled
  */
-void __ref platform_cpu_die(unsigned int cpu)
+void __ref omap4_cpu_die(unsigned int cpu)
 {
 	unsigned int boot_cpu = 0;
 	void __iomem *base = omap_get_wakeupgen_base();
@@ -75,12 +70,3 @@ void __ref platform_cpu_die(unsigned int cpu)
 		pr_debug("CPU%u: spurious wakeup call\n", cpu);
 	}
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 1be8bcb52e93..df298d46707c 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -14,7 +14,9 @@
 #include <linux/platform_device.h>
 
 #include <plat/iommu.h>
-#include <plat/irqs.h>
+
+#include "soc.h"
+#include "common.h"
 
 struct iommu_device {
 	resource_size_t base;
@@ -29,7 +31,7 @@ static int num_iommu_devices;
 static struct iommu_device omap3_devices[] = {
 	{
 		.base = 0x480bd400,
-		.irq = 24,
+		.irq = 24 + OMAP_INTC_START,
 		.pdata = {
 			.name = "isp",
 			.nr_tlb_entries = 8,
@@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = {
 #if defined(CONFIG_OMAP_IOMMU_IVA2)
 	{
 		.base = 0x5d000000,
-		.irq = 28,
+		.irq = 28 + OMAP_INTC_START,
 		.pdata = {
 			.name = "iva2",
 			.nr_tlb_entries = 32,
@@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
 static struct iommu_device omap4_devices[] = {
 	{
 		.base = OMAP4_MMU1_BASE,
-		.irq = OMAP44XX_IRQ_DUCATI_MMU,
+		.irq = 100 + OMAP44XX_IRQ_GIC_START,
 		.pdata = {
 			.name = "ducati",
 			.nr_tlb_entries = 32,
@@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = {
 	},
 	{
 		.base = OMAP4_MMU2_BASE,
-		.irq = OMAP44XX_IRQ_TESLA_MMU,
+		.irq = 28 + OMAP44XX_IRQ_GIC_START,
 		.pdata = {
 			.name = "tesla",
 			.nr_tlb_entries = 32,
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 637a1bdf2ac4..ff4e6a0e9c7c 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,9 +50,8 @@
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
 
-#include <plat/omap44xx.h>
-
 #include "common.h"
+#include "omap44xx.h"
 #include "omap4-sar-layout.h"
 #include "pm.h"
 #include "prcm_mpu44xx.h"
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index d9ae4a53d818..a004cb9acf52 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -19,7 +19,7 @@
 #include <asm/memblock.h>
 
 #include <plat/omap-secure.h>
-#include <mach/omap-secure.h>
+#include "omap-secure.h"
 
 static phys_addr_t omap_secure_memblock_base;
 
diff --git a/arch/arm/mach-omap2/include/mach/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index c90a43589abe..c90a43589abe 100644
--- a/arch/arm/mach-omap2/include/mach/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 9a35adf91232..4d05fa8a4e48 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,11 +24,11 @@
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 
-#include <mach/hardware.h>
-#include <mach/omap-secure.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-secure.h"
+#include "omap-wakeupgen.h"
 #include <asm/cputype.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "clockdomain.h"
@@ -49,7 +49,7 @@ void __iomem *omap4_get_scu_base(void)
 	return scu_base;
 }
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit omap4_secondary_init(unsigned int cpu)
 {
 	/*
 	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
@@ -77,7 +77,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;
@@ -165,7 +165,7 @@ static void __init wakeup_secondary(void)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init omap4_smp_init_cpus(void)
 {
 	unsigned int i = 0, ncores = 1, cpu_id;
 
@@ -196,7 +196,7 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
 
 	/*
@@ -207,3 +207,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 		scu_enable(scu_base);
 	wakeup_secondary();
 }
+
+struct smp_operations omap4_smp_ops __initdata = {
+	.smp_init_cpus		= omap4_smp_init_cpus,
+	.smp_prepare_cpus	= omap4_smp_prepare_cpus,
+	.smp_secondary_init	= omap4_secondary_init,
+	.smp_boot_secondary	= omap4_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= omap4_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 05fdebfaa195..5d3b4f4f81ae 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -27,9 +27,10 @@
 
 #include <asm/hardware/gic.h>
 
-#include <mach/omap-wakeupgen.h>
-#include <mach/omap-secure.h>
+#include "omap-wakeupgen.h"
+#include "omap-secure.h"
 
+#include "soc.h"
 #include "omap4-sar-layout.h"
 #include "common.h"
 
@@ -46,7 +47,7 @@
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_target_cpu[MAX_IRQS];
 static unsigned int irq_banks = MAX_NR_REG_BANKS;
 static unsigned int max_irqs = MAX_IRQS;
 static unsigned int omap_secure_apis;
@@ -229,13 +230,7 @@ static inline void omap4_irq_save_context(void)
 	/* Save AuxBoot* registers */
 	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
 	__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
-
-	/* Save SyncReq generation logic */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
 	__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
 
 	/* Save SyncReq generation logic */
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
index b0fd16f5c391..b0fd16f5c391 100644
--- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/omap-wakeupgen.h
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h
index 92df9e27cc5c..641a2c8d2eee 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/mach-omap2/omap24xx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/omap24xx.h
- *
  * This file contains the processor specific definitions
  * of the TI OMAP24XX.
  *
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h
index 0d818acf3917..c0d1b4b1653f 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/mach-omap2/omap34xx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
  * This file contains the processor specific definitions of the TI OMAP34XX.
  *
  * Copyright (C) 2007 Texas Instruments.
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index c29dee998a79..e1f289748c5d 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -16,26 +16,25 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
-#include <plat/irqs.h>
 #include <plat/sram.h>
 #include <plat/omap-secure.h>
 #include <plat/mmc.h>
 
-#include <mach/hardware.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-wakeupgen.h"
 
+#include "soc.h"
 #include "common.h"
 #include "hsmmc.h"
 #include "omap4-sar-layout.h"
-#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -171,7 +170,10 @@ static int __init omap_l2_cache_init(void)
 	/* Enable PL310 L2 Cache controller */
 	omap_smc1(0x102, 0x1);
 
-	l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
+	if (of_have_populated_dt())
+		l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+	else
+		l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
 
 	/*
 	 * Override default outer_cache.disable with a OMAP4
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h
index 8ad0a377a54b..20de0d5a7e77 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/mach-omap2/omap4-keypad.h
@@ -1,6 +1,8 @@
 #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
 #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
 
+struct omap_board_data;
+
 extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
 				struct omap_board_data *);
 #endif
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h
index c0d478e55c84..43b927b2e2e8 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/mach-omap2/omap44xx.h
@@ -39,12 +39,12 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_IRQ_GIC_START		32
 #define OMAP44XX_SCU_BASE		0x48240000
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
 #define OMAP44XX_L2CACHE_BASE		0x48242000
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
 #define OMAP44XX_MCPDM_BASE		0x40132000
-#define OMAP44XX_MCPDM_L3_BASE		0x49032000
 #define OMAP44XX_SAR_RAM_BASE		0x4a326000
 
 #define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index a2582bb3cab3..a2582bb3cab3 100644
--- a/arch/arm/plat-omap/include/plat/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6ca8e519968d..299ca2821ad1 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,18 +139,20 @@
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 
-#include "common.h"
-#include <plat/cpu.h>
-#include "clockdomain.h"
-#include "powerdomain.h"
 #include <plat/clock.h>
 #include <plat/omap_hwmod.h>
 #include <plat/prcm.h>
 
+#include "soc.h"
+#include "common.h"
+#include "clockdomain.h"
+#include "powerdomain.h"
 #include "cm2xxx_3xxx.h"
 #include "cminst44xx.h"
+#include "cm33xx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
+#include "prm33xx.h"
 #include "prminst44xx.h"
 #include "mux.h"
 #include "pm.h"
@@ -677,16 +679,25 @@ static int _init_main_clk(struct omap_hwmod *oh)
 	if (!oh->main_clk)
 		return 0;
 
-	oh->_clk = omap_clk_get_by_name(oh->main_clk);
-	if (!oh->_clk) {
+	oh->_clk = clk_get(NULL, oh->main_clk);
+	if (IS_ERR(oh->_clk)) {
 		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			   oh->name, oh->main_clk);
 		return -EINVAL;
 	}
+	/*
+	 * HACK: This needs a re-visit once clk_prepare() is implemented
+	 * to do something meaningful. Today its just a no-op.
+	 * If clk_prepare() is used at some point to do things like
+	 * voltage scaling etc, then this would have to be moved to
+	 * some point where subsystems like i2c and pmic become
+	 * available.
+	 */
+	clk_prepare(oh->_clk);
 
 	if (!oh->_clk->clkdm)
-		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
-			   oh->main_clk, oh->_clk->name);
+		pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n",
+			   oh->name, oh->main_clk);
 
 	return ret;
 }
@@ -713,13 +724,22 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 		if (!os->clk)
 			continue;
 
-		c = omap_clk_get_by_name(os->clk);
-		if (!c) {
+		c = clk_get(NULL, os->clk);
+		if (IS_ERR(c)) {
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
 		}
 		os->_clk = c;
+		/*
+		 * HACK: This needs a re-visit once clk_prepare() is implemented
+		 * to do something meaningful. Today its just a no-op.
+		 * If clk_prepare() is used at some point to do things like
+		 * voltage scaling etc, then this would have to be moved to
+		 * some point where subsystems like i2c and pmic become
+		 * available.
+		 */
+		clk_prepare(os->_clk);
 	}
 
 	return ret;
@@ -740,13 +760,22 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 	int ret = 0;
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
-		c = omap_clk_get_by_name(oc->clk);
-		if (!c) {
+		c = clk_get(NULL, oc->clk);
+		if (IS_ERR(c)) {
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
 		}
 		oc->_clk = c;
+		/*
+		 * HACK: This needs a re-visit once clk_prepare() is implemented
+		 * to do something meaningful. Today its just a no-op.
+		 * If clk_prepare() is used at some point to do things like
+		 * voltage scaling etc, then this would have to be moved to
+		 * some point where subsystems like i2c and pmic become
+		 * available.
+		 */
+		clk_prepare(oc->_clk);
 	}
 
 	return ret;
@@ -825,7 +854,7 @@ static void _enable_optional_clocks(struct omap_hwmod *oh)
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk) {
 			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
-				 oc->_clk->name);
+				 __clk_get_name(oc->_clk));
 			clk_enable(oc->_clk);
 		}
 }
@@ -840,7 +869,7 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk) {
 			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
-				 oc->_clk->name);
+				 __clk_get_name(oc->_clk));
 			clk_disable(oc->_clk);
 		}
 }
@@ -868,6 +897,26 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
 }
 
 /**
+ * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Enables the PRCM module mode related to the hwmod @oh.
+ * No return value.
+ */
+static void _am33xx_enable_module(struct omap_hwmod *oh)
+{
+	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+		return;
+
+	pr_debug("omap_hwmod: %s: %s: %d\n",
+		 oh->name, __func__, oh->prcm.omap4.modulemode);
+
+	am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst,
+				oh->clkdm->clkdm_offs,
+				oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
  * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
  * @oh: struct omap_hwmod *
  *
@@ -878,10 +927,10 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
  */
 static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 {
-	if (!oh || !oh->clkdm)
+	if (!oh)
 		return -EINVAL;
 
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm)
 		return 0;
 
 	if (oh->flags & HWMOD_NO_IDLEST)
@@ -894,6 +943,31 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 }
 
 /**
+ * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to enter slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully enters
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_idle() function.
+ */
+static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
+					     oh->clkdm->clkdm_offs,
+					     oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
  * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
  * @oh: struct omap_hwmod *oh
  *
@@ -1380,8 +1454,10 @@ static struct omap_hwmod *_lookup(const char *name)
  */
 static int _init_clkdm(struct omap_hwmod *oh)
 {
-	if (!oh->clkdm_name)
+	if (!oh->clkdm_name) {
+		pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name);
 		return 0;
+	}
 
 	oh->clkdm = clkdm_lookup(oh->clkdm_name);
 	if (!oh->clkdm) {
@@ -1438,8 +1514,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
  * Return the bit position of the reset line that match the
  * input name. Return -ENOENT if not found.
  */
-static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
-			    struct omap_hwmod_rst_info *ohri)
+static int _lookup_hardreset(struct omap_hwmod *oh, const char *name,
+			     struct omap_hwmod_rst_info *ohri)
 {
 	int i;
 
@@ -1475,7 +1551,7 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
 static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
-	u8 ret = -EINVAL;
+	int ret = -EINVAL;
 
 	if (!oh)
 		return -EINVAL;
@@ -1484,7 +1560,7 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
 		return -ENOSYS;
 
 	ret = _lookup_hardreset(oh, name, &ohri);
-	if (IS_ERR_VALUE(ret))
+	if (ret < 0)
 		return ret;
 
 	ret = soc_ops.assert_hardreset(oh, &ohri);
@@ -1509,6 +1585,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
 	int ret = -EINVAL;
+	int hwsup = 0;
 
 	if (!oh)
 		return -EINVAL;
@@ -1520,10 +1597,46 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	if (IS_ERR_VALUE(ret))
 		return ret;
 
+	if (oh->clkdm) {
+		/*
+		 * A clockdomain must be in SW_SUP otherwise reset
+		 * might not be completed. The clockdomain can be set
+		 * in HW_AUTO only when the module become ready.
+		 */
+		hwsup = clkdm_in_hwsup(oh->clkdm);
+		ret = clkdm_hwmod_enable(oh->clkdm, oh);
+		if (ret) {
+			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+			     oh->name, oh->clkdm->name, ret);
+			return ret;
+		}
+	}
+
+	_enable_clocks(oh);
+	if (soc_ops.enable_module)
+		soc_ops.enable_module(oh);
+
 	ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+	if (soc_ops.disable_module)
+		soc_ops.disable_module(oh);
+	_disable_clocks(oh);
+
 	if (ret == -EBUSY)
 		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
+	if (!ret) {
+		/*
+		 * Set the clockdomain to HW_AUTO, assuming that the
+		 * previous state was HW_AUTO.
+		 */
+		if (oh->clkdm && hwsup)
+			clkdm_allow_idle(oh->clkdm);
+	} else {
+		if (oh->clkdm)
+			clkdm_hwmod_disable(oh->clkdm, oh);
+	}
+
 	return ret;
 }
 
@@ -1542,7 +1655,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 static int _read_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
-	u8 ret = -EINVAL;
+	int ret = -EINVAL;
 
 	if (!oh)
 		return -EINVAL;
@@ -1551,32 +1664,35 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
 		return -ENOSYS;
 
 	ret = _lookup_hardreset(oh, name, &ohri);
-	if (IS_ERR_VALUE(ret))
+	if (ret < 0)
 		return ret;
 
 	return soc_ops.is_hardreset_asserted(oh, &ohri);
 }
 
 /**
- * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset
+ * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset
  * @oh: struct omap_hwmod *
  *
- * If any hardreset line associated with @oh is asserted, then return true.
- * Otherwise, if @oh has no hardreset lines associated with it, or if
- * no hardreset lines associated with @oh are asserted, then return false.
+ * If all hardreset lines associated with @oh are asserted, then return true.
+ * Otherwise, if part of @oh is out hardreset or if no hardreset lines
+ * associated with @oh are asserted, then return false.
  * This function is used to avoid executing some parts of the IP block
- * enable/disable sequence if a hardreset line is set.
+ * enable/disable sequence if its hardreset line is set.
  */
-static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
+static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh)
 {
-	int i;
+	int i, rst_cnt = 0;
 
 	if (oh->rst_lines_cnt == 0)
 		return false;
 
 	for (i = 0; i < oh->rst_lines_cnt; i++)
 		if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
-			return true;
+			rst_cnt++;
+
+	if (oh->rst_lines_cnt == rst_cnt)
+		return true;
 
 	return false;
 }
@@ -1595,6 +1711,13 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
 	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
 		return -EINVAL;
 
+	/*
+	 * Since integration code might still be doing something, only
+	 * disable if all lines are under hardreset.
+	 */
+	if (!_are_all_hardreset_lines_asserted(oh))
+		return 0;
+
 	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
 
 	omap4_cminst_module_disable(oh->clkdm->prcm_partition,
@@ -1602,10 +1725,37 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
 				    oh->clkdm->clkdm_offs,
 				    oh->prcm.omap4.clkctrl_offs);
 
-	if (_are_any_hardreset_lines_asserted(oh))
+	v = _omap4_wait_target_disable(oh);
+	if (v)
+		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+			oh->name);
+
+	return 0;
+}
+
+/**
+ * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Disable the PRCM module mode related to the hwmod @oh.
+ * Return EINVAL if the modulemode is not supported and 0 in case of success.
+ */
+static int _am33xx_disable_module(struct omap_hwmod *oh)
+{
+	int v;
+
+	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
+
+	am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
+				 oh->prcm.omap4.clkctrl_offs);
+
+	if (_are_all_hardreset_lines_asserted(oh))
 		return 0;
 
-	v = _omap4_wait_target_disable(oh);
+	v = _am33xx_wait_target_disable(oh);
 	if (v)
 		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
 			oh->name);
@@ -1641,8 +1791,8 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 
 	/* clocks must be on for this operation */
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		pr_warning("omap_hwmod: %s: reset can only be entered from "
-			   "enabled state\n", oh->name);
+		pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",
+			oh->name);
 		return -EINVAL;
 	}
 
@@ -1830,7 +1980,7 @@ static int _enable(struct omap_hwmod *oh)
 	}
 
 	/*
-	 * If an IP block contains HW reset lines and any of them are
+	 * If an IP block contains HW reset lines and all of them are
 	 * asserted, we let integration code associated with that
 	 * block handle the enable.  We've received very little
 	 * information on what those driver authors need, and until
@@ -1838,7 +1988,7 @@ static int _enable(struct omap_hwmod *oh)
 	 * posted to the public lists, this is probably the best we
 	 * can do.
 	 */
-	if (_are_any_hardreset_lines_asserted(oh))
+	if (_are_all_hardreset_lines_asserted(oh))
 		return 0;
 
 	/* Mux pins for device runtime if populated */
@@ -1857,7 +2007,8 @@ static int _enable(struct omap_hwmod *oh)
 		 * completely the module. The clockdomain can be set
 		 * in HW_AUTO only when the module become ready.
 		 */
-		hwsup = clkdm_in_hwsup(oh->clkdm);
+		hwsup = clkdm_in_hwsup(oh->clkdm) &&
+			!clkdm_missing_idle_reporting(oh->clkdm);
 		r = clkdm_hwmod_enable(oh->clkdm, oh);
 		if (r) {
 			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
@@ -1889,6 +2040,7 @@ static int _enable(struct omap_hwmod *oh)
 			_enable_sysc(oh);
 		}
 	} else {
+		_omap4_disable_module(oh);
 		_disable_clocks(oh);
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
 			 oh->name, r);
@@ -1918,7 +2070,7 @@ static int _idle(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	if (_are_any_hardreset_lines_asserted(oh))
+	if (_are_all_hardreset_lines_asserted(oh))
 		return 0;
 
 	if (oh->class->sysc)
@@ -2006,7 +2158,7 @@ static int _shutdown(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	if (_are_any_hardreset_lines_asserted(oh))
+	if (_are_all_hardreset_lines_asserted(oh))
 		return 0;
 
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
@@ -2530,10 +2682,10 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh)
  */
 static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 {
-	if (!oh || !oh->clkdm)
+	if (!oh)
 		return -EINVAL;
 
-	if (oh->flags & HWMOD_NO_IDLEST)
+	if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm)
 		return 0;
 
 	if (!_find_mpu_rt_port(oh))
@@ -2548,6 +2700,33 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 }
 
 /**
+ * _am33xx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
+{
+	if (!oh || !oh->clkdm)
+		return -EINVAL;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	if (!_find_mpu_rt_port(oh))
+		return 0;
+
+	/* XXX check module SIDLEMODE, hardreset status */
+
+	return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
+					      oh->clkdm->clkdm_offs,
+					      oh->prcm.omap4.clkctrl_offs);
+}
+
+/**
  * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
  * @oh: struct omap_hwmod * to assert hardreset
  * @ohri: hardreset line data
@@ -2678,6 +2857,72 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
 				oh->prcm.omap4.rstctrl_offs);
 }
 
+/**
+ * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_assert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from am33xx_prminst_assert_hardreset().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
+				   struct omap_hwmod_rst_info *ohri)
+
+{
+	return am33xx_prm_assert_hardreset(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_deassert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from am33xx_prminst_deassert_hardreset().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
+				     struct omap_hwmod_rst_info *ohri)
+{
+	if (ohri->st_shift)
+		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
+		       oh->name, ohri->name);
+
+	return am33xx_prm_deassert_hardreset(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs,
+				oh->prcm.omap4.rstst_offs);
+}
+
+/**
+ * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_is_hardreset_asserted() with parameters
+ * extracted from the hwmod @oh and the hardreset line data @ohri.
+ * Only intended for use as an soc_ops function pointer.  Passes along
+ * the return value from am33xx_prminst_is_hardreset_asserted().  XXX
+ * This function is scheduled for removal when the PRM code is moved
+ * into drivers/.
+ */
+static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
+					struct omap_hwmod_rst_info *ohri)
+{
+	return am33xx_prm_is_hardreset_asserted(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
 /* Public functions */
 
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
@@ -3158,6 +3403,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 }
 
 /**
+ * omap_hwmod_fill_dma_resources - fill struct resource array with dma data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the array of struct resource to fill
+ *
+ * Fill the struct resource array @res with dma resource data from the
+ * omap_hwmod @oh.  Intended to be called by code that registers
+ * omap_devices.  See also omap_hwmod_count_resources().  Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
+{
+	int i, sdma_reqs_cnt;
+	int r = 0;
+
+	sdma_reqs_cnt = _count_sdma_reqs(oh);
+	for (i = 0; i < sdma_reqs_cnt; i++) {
+		(res + r)->name = (oh->sdma_reqs + i)->name;
+		(res + r)->start = (oh->sdma_reqs + i)->dma_req;
+		(res + r)->end = (oh->sdma_reqs + i)->dma_req;
+		(res + r)->flags = IORESOURCE_DMA;
+		r++;
+	}
+
+	return r;
+}
+
+/**
  * omap_hwmod_get_resource_byname - fetch IP block integration data by name
  * @oh: struct omap_hwmod * to operate on
  * @type: one of the IORESOURCE_* constants from include/linux/ioport.h
@@ -3677,6 +3949,14 @@ void __init omap_hwmod_init(void)
 		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
+	} else if (soc_is_am33xx()) {
+		soc_ops.enable_module = _am33xx_enable_module;
+		soc_ops.disable_module = _am33xx_disable_module;
+		soc_ops.wait_target_ready = _am33xx_wait_target_ready;
+		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
+		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else {
 		WARN(1, "omap_hwmod: unknown SoC type\n");
 	}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 50cfab61b0e2..b5db6007c523 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -12,17 +12,15 @@
  * XXX handle crossbar/shared link difference for L3?
  * XXX these should be marked initdata for multi-OMAP kernels
  */
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mcspi.h>
 #include <plat/dmtimer.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
+#include "l3_2xxx.h"
+#include "l4_2xxx.h"
 #include <plat/mmc.h>
 
 #include "omap_hwmod_common_data.h"
@@ -162,9 +160,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
 
 /* mailbox */
 static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
-	{ .name = "dsp", .irq = 26 },
-	{ .name = "iva", .irq = 34 },
-	{ .irq = -1 }
+	{ .name = "dsp", .irq = 26 + OMAP_INTC_START, },
+	{ .name = "iva", .irq = 34 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2420_mailbox_hwmod = {
@@ -199,9 +197,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
-	{ .name = "tx", .irq = 59 },
-	{ .name = "rx", .irq = 60 },
-	{ .irq = -1 }
+	{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2420_mcbsp1_hwmod = {
@@ -225,9 +223,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = {
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
-	{ .name = "tx", .irq = 62 },
-	{ .name = "rx", .irq = 63 },
-	{ .irq = -1 }
+	{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2420_mcbsp2_hwmod = {
@@ -265,8 +263,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
 
 /* msdi1 */
 static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
-	{ .irq = 83 },
-	{ .irq = -1 }
+	{ .irq = 83 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
@@ -538,6 +536,15 @@ static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = {
 	{ }
 };
 
+static struct omap_hwmod_addr_space omap2420_gpmc_addrs[] = {
+	{
+		.pa_start	= 0x6800a000,
+		.pa_end		= 0x6800afff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
 static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
 	.master		= &omap2xxx_l4_wkup_hwmod,
 	.slave		= &omap2xxx_counter_32k_hwmod,
@@ -546,6 +553,14 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
+	.master		= &omap2xxx_l3_main_hwmod,
+	.slave		= &omap2xxx_gpmc_hwmod,
+	.clk		= "core_l3_ck",
+	.addr		= omap2420_gpmc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
 	&omap2xxx_l3_main__l4_core,
 	&omap2xxx_mpu__l3_main,
@@ -587,8 +602,10 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
 	&omap2420_l4_core__mcbsp1,
 	&omap2420_l4_core__mcbsp2,
 	&omap2420_l4_core__msdi1,
+	&omap2xxx_l4_core__rng,
 	&omap2420_l4_core__hdq1w,
 	&omap2420_l4_wkup__counter_32k,
+	&omap2420_l3__gpmc,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 58b5bc196d32..c455e41b0237 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,21 +12,19 @@
  * XXX handle crossbar/shared link difference for L3?
  * XXX these should be marked initdata for multi-OMAP kernels
  */
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
 #include <plat/dmtimer.h>
 #include <plat/mmc.h>
-#include <plat/l3_2xxx.h>
+#include "l3_2xxx.h"
 
+#include "soc.h"
 #include "omap_hwmod_common_data.h"
-
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "wd_timer.h"
@@ -133,8 +131,8 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
 
 /* gpio5 */
 static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
-	{ .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
-	{ .irq = -1 }
+	{ .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2430_gpio5_hwmod = {
@@ -173,8 +171,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod = {
 
 /* mailbox */
 static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
-	{ .irq = 26 },
-	{ .irq = -1 }
+	{ .irq = 26 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2430_mailbox_hwmod = {
@@ -195,8 +193,8 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
 
 /* mcspi3 */
 static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
-	{ .irq = 91 },
-	{ .irq = -1 }
+	{ .irq = 91 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
@@ -250,9 +248,9 @@ static struct omap_hwmod_class usbotg_class = {
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
 
-	{ .name = "mc", .irq = 92 },
-	{ .name = "dma", .irq = 93 },
-	{ .irq = -1 }
+	{ .name = "mc", .irq = 92 + OMAP_INTC_START, },
+	{ .name = "dma", .irq = 93 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2430_usbhsotg_hwmod = {
@@ -303,11 +301,11 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
-	{ .name = "tx",		.irq = 59 },
-	{ .name = "rx",		.irq = 60 },
-	{ .name = "ovr",	.irq = 61 },
-	{ .name = "common",	.irq = 64 },
-	{ .irq = -1 }
+	{ .name = "tx",		.irq = 59 + OMAP_INTC_START, },
+	{ .name = "rx",		.irq = 60 + OMAP_INTC_START, },
+	{ .name = "ovr",	.irq = 61 + OMAP_INTC_START, },
+	{ .name = "common",	.irq = 64 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2430_mcbsp1_hwmod = {
@@ -331,10 +329,10 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = {
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
-	{ .name = "tx",		.irq = 62 },
-	{ .name = "rx",		.irq = 63 },
-	{ .name = "common",	.irq = 16 },
-	{ .irq = -1 }
+	{ .name = "tx",		.irq = 62 + OMAP_INTC_START, },
+	{ .name = "rx",		.irq = 63 + OMAP_INTC_START, },
+	{ .name = "common",	.irq = 16 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2430_mcbsp2_hwmod = {
@@ -358,10 +356,10 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = {
 
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
-	{ .name = "tx",		.irq = 89 },
-	{ .name = "rx",		.irq = 90 },
-	{ .name = "common",	.irq = 17 },
-	{ .irq = -1 }
+	{ .name = "tx",		.irq = 89 + OMAP_INTC_START, },
+	{ .name = "rx",		.irq = 90 + OMAP_INTC_START, },
+	{ .name = "common",	.irq = 17 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2430_mcbsp3_hwmod = {
@@ -385,10 +383,10 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = {
 
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
-	{ .name = "tx",		.irq = 54 },
-	{ .name = "rx",		.irq = 55 },
-	{ .name = "common",	.irq = 18 },
-	{ .irq = -1 }
+	{ .name = "tx",		.irq = 54 + OMAP_INTC_START, },
+	{ .name = "rx",		.irq = 55 + OMAP_INTC_START, },
+	{ .name = "common",	.irq = 18 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
@@ -418,10 +416,10 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = {
 
 /* mcbsp5 */
 static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
-	{ .name = "tx",		.irq = 81 },
-	{ .name = "rx",		.irq = 82 },
-	{ .name = "common",	.irq = 19 },
-	{ .irq = -1 }
+	{ .name = "tx",		.irq = 81 + OMAP_INTC_START, },
+	{ .name = "rx",		.irq = 82 + OMAP_INTC_START, },
+	{ .name = "common",	.irq = 19 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
@@ -468,8 +466,8 @@ static struct omap_hwmod_class omap2430_mmc_class = {
 
 /* MMC/SD/SDIO1 */
 static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
-	{ .irq = 83 },
-	{ .irq = -1 }
+	{ .irq = 83 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
@@ -509,8 +507,8 @@ static struct omap_hwmod omap2430_mmc1_hwmod = {
 
 /* MMC/SD/SDIO2 */
 static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
-	{ .irq = 86 },
-	{ .irq = -1 }
+	{ .irq = 86 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
@@ -890,6 +888,15 @@ static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = {
 	{ }
 };
 
+static struct omap_hwmod_addr_space omap2430_gpmc_addrs[] = {
+	{
+		.pa_start	= 0x6e000000,
+		.pa_end		= 0x6e000fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
 static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
 	.master		= &omap2xxx_l4_wkup_hwmod,
 	.slave		= &omap2xxx_counter_32k_hwmod,
@@ -898,6 +905,14 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_ocp_if omap2430_l3__gpmc = {
+	.master		= &omap2xxx_l3_main_hwmod,
+	.slave		= &omap2xxx_gpmc_hwmod,
+	.clk		= "core_l3_ck",
+	.addr		= omap2430_gpmc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
 	&omap2xxx_l3_main__l4_core,
 	&omap2xxx_mpu__l3_main,
@@ -947,7 +962,9 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
 	&omap2430_l4_core__mcbsp4,
 	&omap2430_l4_core__mcbsp5,
 	&omap2430_l4_core__hdq1w,
+	&omap2xxx_l4_core__rng,
 	&omap2430_l4_wkup__counter_32k,
+	&omap2430_l3__gpmc,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 102d76e9e9ea..8851bbb6bb24 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -13,9 +13,7 @@
 #include <plat/serial.h>
 #include <plat/dma.h>
 #include <plat/common.h>
-#include <plat/hdq1w.h>
-
-#include <mach/irqs.h>
+#include "hdq1w.h"
 
 #include "omap_hwmod_common_data.h"
 
@@ -182,126 +180,126 @@ struct omap_hwmod_class iva_hwmod_class = {
 /* Common MPU IRQ line data */
 
 struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
-	{ .irq = 37, },
-	{ .irq = -1 }
+	{ .irq = 37 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
-	{ .irq = 38, },
-	{ .irq = -1 }
+	{ .irq = 38 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
-	{ .irq = 39, },
-	{ .irq = -1 }
+	{ .irq = 39 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
-	{ .irq = 40, },
-	{ .irq = -1 }
+	{ .irq = 40 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
-	{ .irq = 41, },
-	{ .irq = -1 }
+	{ .irq = 41 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
-	{ .irq = 42, },
-	{ .irq = -1 }
+	{ .irq = 42 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
-	{ .irq = 43, },
-	{ .irq = -1 }
+	{ .irq = 43 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
-	{ .irq = 44, },
-	{ .irq = -1 }
+	{ .irq = 44 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
-	{ .irq = 45, },
-	{ .irq = -1 }
+	{ .irq = 45 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
-	{ .irq = 46, },
-	{ .irq = -1 }
+	{ .irq = 46 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
-	{ .irq = 47, },
-	{ .irq = -1 }
+	{ .irq = 47 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
-	{ .irq = INT_24XX_UART1_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 72 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
-	{ .irq = INT_24XX_UART2_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 73 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
-	{ .irq = INT_24XX_UART3_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 74 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
-	{ .irq = 25 },
-	{ .irq = -1 }
+	{ .irq = 25 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
-	{ .irq = INT_24XX_I2C1_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 56 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
-	{ .irq = INT_24XX_I2C2_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 57 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
-	{ .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
-	{ .irq = -1 }
+	{ .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
-	{ .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
-	{ .irq = -1 }
+	{ .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
-	{ .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
-	{ .irq = -1 }
+	{ .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
-	{ .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
-	{ .irq = -1 }
+	{ .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
-	{ .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
-	{ .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
-	{ .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
-	{ .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
-	{ .irq = -1 }
+	{ .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */
+	{ .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
+	{ .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
+	{ .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
-	{ .irq = 65 },
-	{ .irq = -1 }
+	{ .irq = 65 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
-	{ .irq = 66 },
-	{ .irq = -1 }
+	{ .irq = 66 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
@@ -320,7 +318,7 @@ struct omap_hwmod_class omap2_hdq1w_class = {
 };
 
 struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
-	{ .irq = 58, },
-	{ .irq = -1 }
+	{ .irq = 58 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 5178e40e84f9..1a1287d62648 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -15,8 +15,8 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
+#include "l3_2xxx.h"
+#include "l4_2xxx.h"
 
 #include "omap_hwmod_common_data.h"
 
@@ -129,6 +129,15 @@ struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = {
 	{ }
 };
 
+static struct omap_hwmod_addr_space omap2_rng_addr_space[] = {
+	{
+		.pa_start	= 0x480a0000,
+		.pa_end		= 0x480a004f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
 /*
  * Common interconnect data
  */
@@ -372,3 +381,11 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_core -> rng */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_rng_hwmod,
+	.clk		= "rng_ick",
+	.addr		= omap2_rng_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index afad69c6ba6e..35dcdb66a4e0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -10,12 +10,10 @@
  */
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
-#include <plat/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
-#include <plat/mcspi.h>
-
-#include <mach/irqs.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
@@ -23,8 +21,8 @@
 #include "wd_timer.h"
 
 struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
-	{ .irq = 48, },
-	{ .irq = -1 }
+	{ .irq = 48 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
@@ -175,6 +173,26 @@ struct omap_hwmod_class omap2xxx_mcspi_class = {
 };
 
 /*
+ * 'gpmc' class
+ * general purpose memory controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = {
+	.name	= "gpmc",
+	.sysc	= &omap2xxx_gpmc_sysc,
+};
+
+/*
  * IP blocks
  */
 
@@ -200,8 +218,14 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
 };
 
 /* MPU */
+static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = {
+	{ .name = "pmu", .irq = 3 },
+	{ .irq = -1 }
+};
+
 struct omap_hwmod omap2xxx_mpu_hwmod = {
 	.name		= "mpu",
+	.mpu_irqs	= omap2xxx_mpu_irqs,
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "mpu_ck",
 };
@@ -222,6 +246,11 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
 	.timer_capability       = OMAP_TIMER_HAS_PWM,
 };
 
+/* timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
+	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ,
+};
+
 /* timer1 */
 
 struct omap_hwmod omap2xxx_timer1_hwmod = {
@@ -310,6 +339,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -328,6 +358,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -346,6 +377,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -364,6 +396,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 };
 
@@ -726,7 +759,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = {
 	.dev_attr	= &omap_mcspi2_dev_attr,
 };
 
-
 static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
 	.name	= "counter",
 };
@@ -745,3 +777,77 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = {
 	},
 	.class		= &omap2xxx_counter_hwmod_class,
 };
+
+/* gpmc */
+static struct omap_hwmod_irq_info omap2xxx_gpmc_irqs[] = {
+	{ .irq = 20 },
+	{ .irq = -1 }
+};
+
+struct omap_hwmod omap2xxx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &omap2xxx_gpmc_hwmod_class,
+	.mpu_irqs	= omap2xxx_gpmc_irqs,
+	.main_clk	= "gpmc_fck",
+	/*
+	 * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
+	 * block.  It is not being added due to any known bugs with
+	 * resetting the GPMC IP block, but rather because any timings
+	 * set by the bootloader are not being correctly programmed by
+	 * the kernel from the board file or DT data.
+	 * HWMOD_INIT_NO_RESET should be removed ASAP.
+	 */
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+			   HWMOD_NO_IDLEST),
+	.prcm		= {
+		.omap2	= {
+			.prcm_reg_id = 3,
+			.module_bit = OMAP24XX_EN_GPMC_MASK,
+			.module_offs = CORE_MOD,
+		},
+	},
+};
+
+/* RNG */
+
+static struct omap_hwmod_class_sysconfig omap2_rng_sysc = {
+	.rev_offs	= 0x3c,
+	.sysc_offs	= 0x40,
+	.syss_offs	= 0x44,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &omap2_rng_sysc,
+};
+
+static struct omap_hwmod_irq_info omap2_rng_mpu_irqs[] = {
+	{ .irq = 52 },
+	{ .irq = -1 }
+};
+
+struct omap_hwmod omap2xxx_rng_hwmod = {
+	.name		= "rng",
+	.mpu_irqs	= omap2_rng_mpu_irqs,
+	.main_clk	= "l4_ck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 4,
+			.module_bit = OMAP24XX_EN_RNG_SHIFT,
+			.idlest_reg_id = 4,
+			.idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT,
+		},
+	},
+	/*
+	 * XXX The first read from the SYSSTATUS register of the RNG
+	 * after the SYSCONFIG SOFTRESET bit is set triggers an
+	 * imprecise external abort.  It's unclear why this happens.
+	 * Until this is analyzed, skip the IP block reset.
+	 */
+	.flags		= HWMOD_INIT_NO_RESET,
+	.class		= &omap2_rng_hwmod_class,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
new file mode 100644
index 000000000000..59d5c1cd316d
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -0,0 +1,3381 @@
+/*
+ * omap_hwmod_33xx_data.c: Hardware modules present on the AM33XX chips
+ *
+ * Copyright (C) {2012} Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is automatically generated from the AM33XX hardware databases.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <plat/dma.h>
+#include <plat/mmc.h>
+#include <plat/i2c.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "control.h"
+#include "cm33xx.h"
+#include "prm33xx.h"
+#include "prm-regbits-33xx.h"
+
+/*
+ * IP blocks
+ */
+
+/*
+ * 'emif_fw' class
+ * instance(s): emif_fw
+ */
+static struct omap_hwmod_class am33xx_emif_fw_hwmod_class = {
+	.name		= "emif_fw",
+};
+
+/* emif_fw */
+static struct omap_hwmod am33xx_emif_fw_hwmod = {
+	.name		= "emif_fw",
+	.class		= &am33xx_emif_fw_hwmod_class,
+	.clkdm_name	= "l4fw_clkdm",
+	.main_clk	= "l4fw_gclk",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'emif' class
+ * instance(s): emif
+ */
+static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = {
+	.rev_offs	= 0x0000,
+};
+
+static struct omap_hwmod_class am33xx_emif_hwmod_class = {
+	.name		= "emif",
+	.sysc		= &am33xx_emif_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_emif_irqs[] = {
+	{ .name = "ddrerr0", .irq = 101 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+/* emif */
+static struct omap_hwmod am33xx_emif_hwmod = {
+	.name		= "emif",
+	.class		= &am33xx_emif_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= am33xx_emif_irqs,
+	.main_clk	= "dpll_ddr_m2_div2_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l3' class
+ * instance(s): l3_main, l3_s, l3_instr
+ */
+static struct omap_hwmod_class am33xx_l3_hwmod_class = {
+	.name		= "l3",
+};
+
+/* l3_main (l3_fast) */
+static struct omap_hwmod_irq_info am33xx_l3_main_irqs[] = {
+	{ .name = "l3debug", .irq = 9 + OMAP_INTC_START, },
+	{ .name = "l3appint", .irq = 10 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_l3_main_hwmod = {
+	.name		= "l3_main",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= am33xx_l3_main_irqs,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_L3_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l3_s */
+static struct omap_hwmod am33xx_l3_s_hwmod = {
+	.name		= "l3_s",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+};
+
+/* l3_instr */
+static struct omap_hwmod am33xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
+ */
+static struct omap_hwmod_class am33xx_l4_hwmod_class = {
+	.name		= "l4",
+};
+
+/* l4_ls */
+static struct omap_hwmod am33xx_l4_ls_hwmod = {
+	.name		= "l4_ls",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_hs */
+static struct omap_hwmod am33xx_l4_hs_hwmod = {
+	.name		= "l4_hs",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4hs_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l4hs_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+
+/* l4_wkup */
+static struct omap_hwmod am33xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_fw */
+static struct omap_hwmod am33xx_l4_fw_hwmod = {
+	.name		= "l4_fw",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4fw_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mpu' class
+ */
+static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
+	.name	= "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod_irq_info am33xx_mpu_irqs[] = {
+	{ .name = "emuint", .irq = 0 + OMAP_INTC_START, },
+	{ .name = "commtx", .irq = 1 + OMAP_INTC_START, },
+	{ .name = "commrx", .irq = 2 + OMAP_INTC_START, },
+	{ .name = "bench", .irq = 3 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &am33xx_mpu_hwmod_class,
+	.clkdm_name	= "mpu_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= am33xx_mpu_irqs,
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'wakeup m3' class
+ * Wakeup controller sub-system under wakeup domain
+ */
+static struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
+	.name		= "wkup_m3",
+};
+
+static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
+	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
+};
+
+static struct omap_hwmod_irq_info am33xx_wkup_m3_irqs[] = {
+	{ .name = "txev", .irq = 78 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+/* wkup_m3  */
+static struct omap_hwmod am33xx_wkup_m3_hwmod = {
+	.name		= "wkup_m3",
+	.class		= &am33xx_wkup_m3_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	.flags		= HWMOD_INIT_NO_RESET,	/* Keep hardreset asserted */
+	.mpu_irqs	= am33xx_wkup_m3_irqs,
+	.main_clk	= "dpll_core_m4_div2_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET,
+			.rstctrl_offs	= AM33XX_RM_WKUP_RSTCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_wkup_m3_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_wkup_m3_resets),
+};
+
+/*
+ * 'pru-icss' class
+ * Programmable Real-Time Unit and Industrial Communication Subsystem
+ */
+static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
+	.name	= "pruss",
+};
+
+static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
+	{ .name = "pruss", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_irq_info am33xx_pruss_irqs[] = {
+	{ .name = "evtout0", .irq = 20 + OMAP_INTC_START, },
+	{ .name = "evtout1", .irq = 21 + OMAP_INTC_START, },
+	{ .name = "evtout2", .irq = 22 + OMAP_INTC_START, },
+	{ .name = "evtout3", .irq = 23 + OMAP_INTC_START, },
+	{ .name = "evtout4", .irq = 24 + OMAP_INTC_START, },
+	{ .name = "evtout5", .irq = 25 + OMAP_INTC_START, },
+	{ .name = "evtout6", .irq = 26 + OMAP_INTC_START, },
+	{ .name = "evtout7", .irq = 27 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+/* pru-icss */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod am33xx_pruss_hwmod = {
+	.name		= "pruss",
+	.class		= &am33xx_pruss_hwmod_class,
+	.clkdm_name	= "pruss_ocp_clkdm",
+	.mpu_irqs	= am33xx_pruss_irqs,
+	.main_clk	= "pruss_ocp_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET,
+			.rstctrl_offs	= AM33XX_RM_PER_RSTCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_pruss_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
+};
+
+/* gfx */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
+	.name	= "gfx",
+};
+
+static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
+	{ .name = "gfx", .rst_shift = 0 },
+};
+
+static struct omap_hwmod_irq_info am33xx_gfx_irqs[] = {
+	{ .name = "gfxint", .irq = 37 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_gfx_hwmod = {
+	.name		= "gfx",
+	.class		= &am33xx_gfx_hwmod_class,
+	.clkdm_name	= "gfx_l3_clkdm",
+	.mpu_irqs	= am33xx_gfx_irqs,
+	.main_clk	= "gfx_fck_div_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET,
+			.rstctrl_offs	= AM33XX_RM_GFX_RSTCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_gfx_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
+};
+
+/*
+ * 'prcm' class
+ * power and reset manager (whole prcm infrastructure)
+ */
+static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
+	.name	= "prcm",
+};
+
+/* prcm */
+static struct omap_hwmod am33xx_prcm_hwmod = {
+	.name		= "prcm",
+	.class		= &am33xx_prcm_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/*
+ * 'adc/tsc' class
+ * TouchScreen Controller (Anolog-To-Digital Converter)
+ */
+static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = {
+	.rev_offs	= 0x00,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = {
+	.name		= "adc_tsc",
+	.sysc		= &am33xx_adc_tsc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_adc_tsc_irqs[] = {
+	{ .irq = 16 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_adc_tsc_hwmod = {
+	.name		= "adc_tsc",
+	.class		= &am33xx_adc_tsc_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.mpu_irqs	= am33xx_adc_tsc_irqs,
+	.main_clk	= "adc_tsc_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * Modules omap_hwmod structures
+ *
+ * The following IPs are excluded for the moment because:
+ * - They do not need an explicit SW control using omap_hwmod API.
+ * - They still need to be validated with the driver
+ *   properly adapted to omap_hwmod / omap_device
+ *
+ *    - cEFUSE (doesn't fall under any ocp_if)
+ *    - clkdiv32k
+ *    - debugss
+ *    - ocmc ram
+ *    - ocp watch point
+ *    - aes0
+ *    - sha0
+ */
+#if 0
+/*
+ * 'cefuse' class
+ */
+static struct omap_hwmod_class am33xx_cefuse_hwmod_class = {
+	.name		= "cefuse",
+};
+
+static struct omap_hwmod am33xx_cefuse_hwmod = {
+	.name		= "cefuse",
+	.class		= &am33xx_cefuse_hwmod_class,
+	.clkdm_name	= "l4_cefuse_clkdm",
+	.main_clk	= "cefuse_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'clkdiv32k' class
+ */
+static struct omap_hwmod_class am33xx_clkdiv32k_hwmod_class = {
+	.name		= "clkdiv32k",
+};
+
+static struct omap_hwmod am33xx_clkdiv32k_hwmod = {
+	.name		= "clkdiv32k",
+	.class		= &am33xx_clkdiv32k_hwmod_class,
+	.clkdm_name	= "clk_24mhz_clkdm",
+	.main_clk	= "clkdiv32k_ick",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'debugss' class
+ * debug sub system
+ */
+static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
+	.name		= "debugss",
+};
+
+static struct omap_hwmod am33xx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &am33xx_debugss_hwmod_class,
+	.clkdm_name	= "l3_aon_clkdm",
+	.main_clk	= "debugss_ick",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ocmcram */
+static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
+	.name = "ocmcram",
+};
+
+static struct omap_hwmod am33xx_ocmcram_hwmod = {
+	.name		= "ocmcram",
+	.class		= &am33xx_ocmcram_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ocpwp */
+static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = {
+	.name		= "ocpwp",
+};
+
+static struct omap_hwmod am33xx_ocpwp_hwmod = {
+	.name		= "ocpwp",
+	.class		= &am33xx_ocpwp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'aes' class
+ */
+static struct omap_hwmod_class am33xx_aes_hwmod_class = {
+	.name		= "aes",
+};
+
+static struct omap_hwmod_irq_info am33xx_aes0_irqs[] = {
+	{ .irq = 102 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_aes0_hwmod = {
+	.name		= "aes0",
+	.class		= &am33xx_aes_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.mpu_irqs	= am33xx_aes0_irqs,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_AES0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* sha0 */
+static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
+	.name		= "sha0",
+};
+
+static struct omap_hwmod_irq_info am33xx_sha0_irqs[] = {
+	{ .irq = 108 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_sha0_hwmod = {
+	.name		= "sha0",
+	.class		= &am33xx_sha0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.mpu_irqs	= am33xx_sha0_irqs,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+#endif
+
+/* 'smartreflex' class */
+static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
+	.name		= "smartreflex",
+};
+
+/* smartreflex0 */
+static struct omap_hwmod_irq_info am33xx_smartreflex0_irqs[] = {
+	{ .irq = 120 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_smartreflex0_hwmod = {
+	.name		= "smartreflex0",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.mpu_irqs	= am33xx_smartreflex0_irqs,
+	.main_clk	= "smartreflex0_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* smartreflex1 */
+static struct omap_hwmod_irq_info am33xx_smartreflex1_irqs[] = {
+	{ .irq = 121 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_smartreflex1_hwmod = {
+	.name		= "smartreflex1",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.mpu_irqs	= am33xx_smartreflex1_irqs,
+	.main_clk	= "smartreflex1_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'control' module class
+ */
+static struct omap_hwmod_class am33xx_control_hwmod_class = {
+	.name		= "control",
+};
+
+static struct omap_hwmod_irq_info am33xx_control_irqs[] = {
+	{ .irq = 8 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_control_hwmod = {
+	.name		= "control",
+	.class		= &am33xx_control_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= am33xx_control_irqs,
+	.main_clk	= "dpll_core_m4_div2_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'cpgmac' class
+ * cpsw/cpgmac sub system
+ */
+static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x8,
+	.syss_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+			   MSTANDBY_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
+	.name		= "cpgmac0",
+	.sysc		= &am33xx_cpgmac_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_cpgmac0_irqs[] = {
+	{ .name = "c0_rx_thresh_pend", .irq = 40 + OMAP_INTC_START, },
+	{ .name = "c0_rx_pend", .irq = 41 + OMAP_INTC_START, },
+	{ .name = "c0_tx_pend", .irq = 42 + OMAP_INTC_START, },
+	{ .name = "c0_misc_pend", .irq = 43 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_cpgmac0_hwmod = {
+	.name		= "cpgmac0",
+	.class		= &am33xx_cpgmac0_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.mpu_irqs	= am33xx_cpgmac0_irqs,
+	.main_clk	= "cpsw_125mhz_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * dcan class
+ */
+static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
+	.name = "d_can",
+};
+
+/* dcan0 */
+static struct omap_hwmod_irq_info am33xx_dcan0_irqs[] = {
+	{ .name = "d_can_ms", .irq = 52 + OMAP_INTC_START, },
+	{ .name = "d_can_mo", .irq = 53 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_dcan0_hwmod = {
+	.name		= "d_can0",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_dcan0_irqs,
+	.main_clk	= "dcan0_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* dcan1 */
+static struct omap_hwmod_irq_info am33xx_dcan1_irqs[] = {
+	{ .name = "d_can_ms", .irq = 55 + OMAP_INTC_START, },
+	{ .name = "d_can_mo", .irq = 56 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+static struct omap_hwmod am33xx_dcan1_hwmod = {
+	.name		= "d_can1",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_dcan1_irqs,
+	.main_clk	= "dcan1_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* elm */
+static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_elm_hwmod_class = {
+	.name		= "elm",
+	.sysc		= &am33xx_elm_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_elm_irqs[] = {
+	{ .irq = 4 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &am33xx_elm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_elm_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_ELM_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'epwmss' class: ecap0,1,2,  ehrpwm0,1,2
+ */
+static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
+	.name		= "epwmss",
+	.sysc		= &am33xx_epwmss_sysc,
+};
+
+/* ehrpwm0 */
+static struct omap_hwmod_irq_info am33xx_ehrpwm0_irqs[] = {
+	{ .name = "int", .irq = 86 + OMAP_INTC_START, },
+	{ .name = "tzint", .irq = 58 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ehrpwm0_hwmod = {
+	.name		= "ehrpwm0",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_ehrpwm0_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ehrpwm1 */
+static struct omap_hwmod_irq_info am33xx_ehrpwm1_irqs[] = {
+	{ .name = "int", .irq = 87 + OMAP_INTC_START, },
+	{ .name = "tzint", .irq = 59 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ehrpwm1_hwmod = {
+	.name		= "ehrpwm1",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_ehrpwm1_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ehrpwm2 */
+static struct omap_hwmod_irq_info am33xx_ehrpwm2_irqs[] = {
+	{ .name = "int", .irq = 39 + OMAP_INTC_START, },
+	{ .name = "tzint", .irq = 60 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ehrpwm2_hwmod = {
+	.name		= "ehrpwm2",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_ehrpwm2_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap0 */
+static struct omap_hwmod_irq_info am33xx_ecap0_irqs[] = {
+	{ .irq = 31 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ecap0_hwmod = {
+	.name		= "ecap0",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_ecap0_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap1 */
+static struct omap_hwmod_irq_info am33xx_ecap1_irqs[] = {
+	{ .irq = 47 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ecap1_hwmod = {
+	.name		= "ecap1",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_ecap1_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap2 */
+static struct omap_hwmod_irq_info am33xx_ecap2_irqs[] = {
+	{ .irq = 61 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_ecap2_hwmod = {
+	.name		= "ecap2",
+	.mpu_irqs	= am33xx_ecap2_irqs,
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'gpio' class: for gpio 0,1,2,3
+ */
+static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+	.name		= "gpio",
+	.sysc		= &am33xx_gpio_sysc,
+	.rev		= 2,
+};
+
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio0 */
+static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio0_dbclk" },
+};
+
+static struct omap_hwmod_irq_info am33xx_gpio0_irqs[] = {
+	{ .irq = 96 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_gpio0_hwmod = {
+	.name		= "gpio1",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= am33xx_gpio0_irqs,
+	.main_clk	= "dpll_core_m4_div2_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio0_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio0_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info am33xx_gpio1_irqs[] = {
+	{ .irq = 98 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+static struct omap_hwmod am33xx_gpio1_hwmod = {
+	.name		= "gpio2",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= am33xx_gpio1_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info am33xx_gpio2_irqs[] = {
+	{ .irq = 32 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+static struct omap_hwmod am33xx_gpio2_hwmod = {
+	.name		= "gpio3",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= am33xx_gpio2_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info am33xx_gpio3_irqs[] = {
+	{ .irq = 62 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+static struct omap_hwmod am33xx_gpio3_hwmod = {
+	.name		= "gpio4",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= am33xx_gpio3_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpmc */
+static struct omap_hwmod_class_sysconfig gpmc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
+	.name		= "gpmc",
+	.sysc		= &gpmc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_gpmc_irqs[] = {
+	{ .irq = 100 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &am33xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= am33xx_gpmc_irqs,
+	.main_clk	= "l3s_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'i2c' class */
+static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &am33xx_i2c_sysc,
+	.rev		= OMAP_I2C_IP_VERSION_2,
+	.reset		= &omap_i2c_reset,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE |
+		  OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
+};
+
+/* i2c1 */
+static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
+	{ .irq = 70 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info i2c1_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 0, },
+	{ .name = "rx", .dma_req = 0, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.mpu_irqs	= i2c1_mpu_irqs,
+	.sdma_reqs	= i2c1_edma_reqs,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c1 */
+static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
+	{ .irq = 71 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info i2c2_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 0, },
+	{ .name = "rx", .dma_req = 0, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= i2c2_mpu_irqs,
+	.sdma_reqs	= i2c2_edma_reqs,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs	= AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c3 */
+static struct omap_hwmod_dma_info i2c3_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 0, },
+	{ .name = "rx", .dma_req = 0, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
+	{ .irq = 30 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= i2c3_mpu_irqs,
+	.sdma_reqs	= i2c3_edma_reqs,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+
+/* lcdc */
+static struct omap_hwmod_class_sysconfig lcdc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x54,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_lcdc_hwmod_class = {
+	.name		= "lcdc",
+	.sysc		= &lcdc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_lcdc_irqs[] = {
+	{ .irq = 36 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_lcdc_hwmod = {
+	.name		= "lcdc",
+	.class		= &am33xx_lcdc_hwmod_class,
+	.clkdm_name	= "lcdc_clkdm",
+	.mpu_irqs	= am33xx_lcdc_irqs,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "lcd_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &am33xx_mailbox_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_mailbox_irqs[] = {
+	{ .irq = 77 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &am33xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_mailbox_irqs,
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mcasp' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
+	.name		= "mcasp",
+	.sysc		= &am33xx_mcasp_sysc,
+};
+
+/* mcasp0 */
+static struct omap_hwmod_irq_info am33xx_mcasp0_irqs[] = {
+	{ .name = "ax", .irq = 80 + OMAP_INTC_START, },
+	{ .name = "ar", .irq = 81 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcasp0_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 8, },
+	{ .name = "rx", .dma_req = 9, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_mcasp0_hwmod = {
+	.name		= "mcasp0",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.mpu_irqs	= am33xx_mcasp0_irqs,
+	.sdma_reqs	= am33xx_mcasp0_edma_reqs,
+	.main_clk	= "mcasp0_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* mcasp1 */
+static struct omap_hwmod_irq_info am33xx_mcasp1_irqs[] = {
+	{ .name = "ax", .irq = 82 + OMAP_INTC_START, },
+	{ .name = "ar", .irq = 83 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcasp1_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 10, },
+	{ .name = "rx", .dma_req = 11, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_mcasp1_hwmod = {
+	.name		= "mcasp1",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.mpu_irqs	= am33xx_mcasp1_irqs,
+	.sdma_reqs	= am33xx_mcasp1_edma_reqs,
+	.main_clk	= "mcasp1_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'mmc' class */
+static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
+	.rev_offs	= 0x1fc,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
+	.name		= "mmc",
+	.sysc		= &am33xx_mmc_sysc,
+};
+
+/* mmc0 */
+static struct omap_hwmod_irq_info am33xx_mmc0_irqs[] = {
+	{ .irq = 64 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mmc0_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 24, },
+	{ .name = "rx", .dma_req = 25, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+static struct omap_hwmod am33xx_mmc0_hwmod = {
+	.name		= "mmc1",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_mmc0_irqs,
+	.sdma_reqs	= am33xx_mmc0_edma_reqs,
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc0_dev_attr,
+};
+
+/* mmc1 */
+static struct omap_hwmod_irq_info am33xx_mmc1_irqs[] = {
+	{ .irq = 28 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mmc1_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 2, },
+	{ .name = "rx", .dma_req = 3, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+static struct omap_hwmod am33xx_mmc1_hwmod = {
+	.name		= "mmc2",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_mmc1_irqs,
+	.sdma_reqs	= am33xx_mmc1_edma_reqs,
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_hwmod_irq_info am33xx_mmc2_irqs[] = {
+	{ .irq = 29 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mmc2_edma_reqs[] = {
+	{ .name = "tx", .dma_req = 64, },
+	{ .name = "rx", .dma_req = 65, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+static struct omap_hwmod am33xx_mmc2_hwmod = {
+	.name		= "mmc3",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.mpu_irqs	= am33xx_mmc2_irqs,
+	.sdma_reqs	= am33xx_mmc2_edma_reqs,
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc2_dev_attr,
+};
+
+/*
+ * 'rtc' class
+ * rtc subsystem
+ */
+static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
+	.rev_offs	= 0x0074,
+	.sysc_offs	= 0x0078,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
+			  SIDLE_SMART | SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
+	.name		= "rtc",
+	.sysc		= &am33xx_rtc_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_rtc_irqs[] = {
+	{ .name = "rtcint", .irq = 75 + OMAP_INTC_START, },
+	{ .name = "rtcalarmint", .irq = 76 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_rtc_hwmod = {
+	.name		= "rtc",
+	.class		= &am33xx_rtc_hwmod_class,
+	.clkdm_name	= "l4_rtc_clkdm",
+	.mpu_irqs	= am33xx_rtc_irqs,
+	.main_clk	= "clk_32768_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'spi' class */
+static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0110,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_spi_hwmod_class = {
+	.name		= "mcspi",
+	.sysc		= &am33xx_mcspi_sysc,
+	.rev		= OMAP4_MCSPI_REV,
+};
+
+/* spi0 */
+static struct omap_hwmod_irq_info am33xx_spi0_irqs[] = {
+	{ .irq = 65 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcspi0_edma_reqs[] = {
+	{ .name = "rx0", .dma_req = 17 },
+	{ .name = "tx0", .dma_req = 16 },
+	{ .name = "rx1", .dma_req = 19 },
+	{ .name = "tx1", .dma_req = 18 },
+	{ .dma_req = -1 }
+};
+
+static struct omap2_mcspi_dev_attr mcspi_attrib = {
+	.num_chipselect	= 2,
+};
+static struct omap_hwmod am33xx_spi0_hwmod = {
+	.name		= "spi0",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_spi0_irqs,
+	.sdma_reqs	= am33xx_mcspi0_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/* spi1 */
+static struct omap_hwmod_irq_info am33xx_spi1_irqs[] = {
+	{ .irq = 125 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod_dma_info am33xx_mcspi1_edma_reqs[] = {
+	{ .name = "rx0", .dma_req = 43 },
+	{ .name = "tx0", .dma_req = 42 },
+	{ .name = "rx1", .dma_req = 45 },
+	{ .name = "tx1", .dma_req = 44 },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod am33xx_spi1_hwmod = {
+	.name		= "spi1",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_spi1_irqs,
+	.sdma_reqs	= am33xx_mcspi1_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the
+ * processes running on multiple processors
+ */
+static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
+	.name		= "spinlock",
+};
+
+static struct omap_hwmod am33xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &am33xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'timer 2-7' class */
+static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_timer_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer_sysc,
+};
+
+/* timer1 1ms */
+static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer1ms_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_timer1_irqs[] = {
+	{ .irq = 67 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer1_hwmod = {
+	.name		= "timer1",
+	.class		= &am33xx_timer1ms_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.mpu_irqs	= am33xx_timer1_irqs,
+	.main_clk	= "timer1_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_timer2_irqs[] = {
+	{ .irq = 68 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer2_hwmod = {
+	.name		= "timer2",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_timer2_irqs,
+	.main_clk	= "timer2_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_timer3_irqs[] = {
+	{ .irq = 69 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer3_hwmod = {
+	.name		= "timer3",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_timer3_irqs,
+	.main_clk	= "timer3_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_timer4_irqs[] = {
+	{ .irq = 92 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer4_hwmod = {
+	.name		= "timer4",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_timer4_irqs,
+	.main_clk	= "timer4_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_timer5_irqs[] = {
+	{ .irq = 93 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer5_hwmod = {
+	.name		= "timer5",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_timer5_irqs,
+	.main_clk	= "timer5_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_timer6_irqs[] = {
+	{ .irq = 94 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer6_hwmod = {
+	.name		= "timer6",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_timer6_irqs,
+	.main_clk	= "timer6_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_timer7_irqs[] = {
+	{ .irq = 95 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_timer7_hwmod = {
+	.name		= "timer7",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_timer7_irqs,
+	.main_clk	= "timer7_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tpcc */
+static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
+	.name		= "tpcc",
+};
+
+static struct omap_hwmod_irq_info am33xx_tpcc_irqs[] = {
+	{ .name	= "edma0", .irq = 12 + OMAP_INTC_START, },
+	{ .name = "edma0_mperr", .irq = 13 + OMAP_INTC_START, },
+	{ .name	= "edma0_err", .irq = 14 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tpcc_hwmod = {
+	.name		= "tpcc",
+	.class		= &am33xx_tpcc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.mpu_irqs	= am33xx_tpcc_irqs,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+/* 'tptc' class */
+static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
+	.name		= "tptc",
+	.sysc		= &am33xx_tptc_sysc,
+};
+
+/* tptc0 */
+static struct omap_hwmod_irq_info am33xx_tptc0_irqs[] = {
+	{ .irq = 112 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tptc0_hwmod = {
+	.name		= "tptc0",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.mpu_irqs	= am33xx_tptc0_irqs,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc1 */
+static struct omap_hwmod_irq_info am33xx_tptc1_irqs[] = {
+	{ .irq = 113 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tptc1_hwmod = {
+	.name		= "tptc1",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.mpu_irqs	= am33xx_tptc1_irqs,
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc2 */
+static struct omap_hwmod_irq_info am33xx_tptc2_irqs[] = {
+	{ .irq = 114 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_tptc2_hwmod = {
+	.name		= "tptc2",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.mpu_irqs	= am33xx_tptc2_irqs,
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'uart' class */
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name		= "uart",
+	.sysc		= &uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod_dma_info uart1_edma_reqs[] = {
+	{ .name = "tx",	.dma_req = 26, },
+	{ .name = "rx",	.dma_req = 27, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_irq_info am33xx_uart1_irqs[] = {
+	{ .irq = 72 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &uart_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.mpu_irqs	= am33xx_uart1_irqs,
+	.sdma_reqs	= uart1_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
+	{ .irq = 73 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_uart2_irqs,
+	.sdma_reqs	= uart1_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_UART1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart3 */
+static struct omap_hwmod_dma_info uart3_edma_reqs[] = {
+	{ .name = "tx",	.dma_req = 30, },
+	{ .name = "rx",	.dma_req = 31, },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_irq_info am33xx_uart3_irqs[] = {
+	{ .irq = 74 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_uart3_irqs,
+	.sdma_reqs	= uart3_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_UART2_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_uart4_irqs[] = {
+	{ .irq = 44 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_uart4_irqs,
+	.sdma_reqs	= uart1_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_UART3_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_uart5_irqs[] = {
+	{ .irq = 45 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart5_hwmod = {
+	.name		= "uart5",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_uart5_irqs,
+	.sdma_reqs	= uart1_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_UART4_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_irq_info am33xx_uart6_irqs[] = {
+	{ .irq = 46 + OMAP_INTC_START, },
+	{ .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_uart6_hwmod = {
+	.name		= "uart6",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.mpu_irqs	= am33xx_uart6_irqs,
+	.sdma_reqs	= uart1_edma_reqs,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_UART5_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'wd_timer' class */
+static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+};
+
+/*
+ * XXX: device.c file uses hardcoded name for watchdog timer
+ * driver "wd_timer2, so we are also using same name as of now...
+ */
+static struct omap_hwmod am33xx_wd_timer1_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &am33xx_wd_timer_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "wdt1_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_otg' class
+ * high-speed on-the-go universal serial bus (usb_otg) controller
+ */
+static struct omap_hwmod_class_sysconfig am33xx_usbhsotg_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_usbotg_class = {
+	.name		= "usbotg",
+	.sysc		= &am33xx_usbhsotg_sysc,
+};
+
+static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
+	{ .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
+	{ .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
+	{ .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
+	{ .irq = -1 + OMAP_INTC_START, },
+};
+
+static struct omap_hwmod am33xx_usbss_hwmod = {
+	.name		= "usb_otg_hs",
+	.class		= &am33xx_usbotg_class,
+	.clkdm_name	= "l3s_clkdm",
+	.mpu_irqs	= am33xx_usbss_mpu_irqs,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "usbotg_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_USB0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+
+/*
+ * Interfaces
+ */
+
+/* l4 fw -> emif fw */
+static struct omap_hwmod_ocp_if am33xx_l4_fw__emif_fw = {
+	.master		= &am33xx_l4_fw_hwmod,
+	.slave		= &am33xx_emif_fw_hwmod,
+	.clk		= "l4fw_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_emif_addrs[] = {
+	{
+		.pa_start	= 0x4c000000,
+		.pa_end		= 0x4c000fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+/* l3 main -> emif */
+static struct omap_hwmod_ocp_if am33xx_l3_main__emif = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_emif_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.addr		= am33xx_emif_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3 main */
+static struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> l4 hs */
+static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l4_hs_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 s */
+static struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_s_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 per/ls */
+static struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_ls_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 wkup */
+static struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 fw */
+static struct omap_hwmod_ocp_if am33xx_l3_s__l4_fw = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_fw_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 instr */
+static struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_instr_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> prcm */
+static struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_prcm_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l3 main*/
+static struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* pru-icss -> l3 main */
+static struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
+	.master		= &am33xx_pruss_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* wkup m3 -> l4 wkup */
+static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
+	.master		= &am33xx_wkup_m3_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gfx -> l3 main */
+static struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
+	.master		= &am33xx_gfx_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> wkup m3 */
+static struct omap_hwmod_addr_space am33xx_wkup_m3_addrs[] = {
+	{
+		.name		= "umem",
+		.pa_start	= 0x44d00000,
+		.pa_end		= 0x44d00000 + SZ_16K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "dmem",
+		.pa_start	= 0x44d80000,
+		.pa_end		= 0x44d80000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_wkup_m3_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_wkup_m3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 hs -> pru-icss */
+static struct omap_hwmod_addr_space am33xx_pruss_addrs[] = {
+	{
+		.pa_start	= 0x4a300000,
+		.pa_end		= 0x4a300000 + SZ_512K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
+	.master		= &am33xx_l4_hs_hwmod,
+	.slave		= &am33xx_pruss_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.addr		= am33xx_pruss_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> gfx */
+static struct omap_hwmod_addr_space am33xx_gfx_addrs[] = {
+	{
+		.pa_start	= 0x56000000,
+		.pa_end		= 0x56000000 + SZ_16M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_gfx_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.addr		= am33xx_gfx_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> smartreflex0 */
+static struct omap_hwmod_addr_space am33xx_smartreflex0_addrs[] = {
+	{
+		.pa_start	= 0x44e37000,
+		.pa_end		= 0x44e37000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex0_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_smartreflex0_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 wkup -> smartreflex1 */
+static struct omap_hwmod_addr_space am33xx_smartreflex1_addrs[] = {
+	{
+		.pa_start	= 0x44e39000,
+		.pa_end		= 0x44e39000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__smartreflex1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex1_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_smartreflex1_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 wkup -> control */
+static struct omap_hwmod_addr_space am33xx_control_addrs[] = {
+	{
+		.pa_start	= 0x44e10000,
+		.pa_end		= 0x44e10000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_control_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_control_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 wkup -> rtc */
+static struct omap_hwmod_addr_space am33xx_rtc_addrs[] = {
+	{
+		.pa_start	= 0x44e3e000,
+		.pa_end		= 0x44e3e000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_rtc_hwmod,
+	.clk		= "clkdiv32k_ick",
+	.addr		= am33xx_rtc_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per/ls -> DCAN0 */
+static struct omap_hwmod_addr_space am33xx_dcan0_addrs[] = {
+	{
+		.pa_start	= 0x481CC000,
+		.pa_end		= 0x481CC000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_dcan0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> DCAN1 */
+static struct omap_hwmod_addr_space am33xx_dcan1_addrs[] = {
+	{
+		.pa_start	= 0x481D0000,
+		.pa_end		= 0x481D0000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_dcan1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> GPIO2 */
+static struct omap_hwmod_addr_space am33xx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x4804C000,
+		.pa_end		= 0x4804C000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_gpio1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio3 */
+static struct omap_hwmod_addr_space am33xx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x481AC000,
+		.pa_end		= 0x481AC000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_gpio2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio4 */
+static struct omap_hwmod_addr_space am33xx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x481AE000,
+		.pa_end		= 0x481AE000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio3_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_gpio3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> I2C1 */
+static struct omap_hwmod_addr_space am33xx_i2c1_addr_space[] = {
+	{
+		.pa_start	= 0x44E0B000,
+		.pa_end		= 0x44E0B000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_i2c1_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_i2c1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* L4 WKUP -> GPIO1 */
+static struct omap_hwmod_addr_space am33xx_gpio0_addrs[] = {
+	{
+		.pa_start	= 0x44E07000,
+		.pa_end		= 0x44E07000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_gpio0_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_gpio0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> ADC_TSC */
+static struct omap_hwmod_addr_space am33xx_adc_tsc_addrs[] = {
+	{
+		.pa_start	= 0x44E0D000,
+		.pa_end		= 0x44E0D000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_adc_tsc_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_adc_tsc_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_cpgmac0_addr_space[] = {
+	/* cpsw ss */
+	{
+		.pa_start	= 0x4a100000,
+		.pa_end		= 0x4a100000 + SZ_2K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	/* cpsw wr */
+	{
+		.pa_start	= 0x4a101200,
+		.pa_end		= 0x4a101200 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
+	.master		= &am33xx_l4_hs_hwmod,
+	.slave		= &am33xx_cpgmac0_hwmod,
+	.clk		= "cpsw_125mhz_gclk",
+	.addr		= am33xx_cpgmac0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
+	{
+		.pa_start	= 0x48080000,
+		.pa_end		= 0x48080000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_elm_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_elm_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ehrpwm0_addr_space[] = {
+	{
+		.pa_start	= 0x48300000,
+		.pa_end		= 0x48300000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.pa_start	= 0x48300200,
+		.pa_end		= 0x48300200 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_ehrpwm0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_ehrpwm0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ehrpwm1_addr_space[] = {
+	{
+		.pa_start	= 0x48302000,
+		.pa_end		= 0x48302000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.pa_start	= 0x48302200,
+		.pa_end		= 0x48302200 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_ehrpwm1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_ehrpwm1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ehrpwm2_addr_space[] = {
+	{
+		.pa_start	= 0x48304000,
+		.pa_end		= 0x48304000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.pa_start	= 0x48304200,
+		.pa_end		= 0x48304200 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_ehrpwm2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_ehrpwm2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ecap0_addr_space[] = {
+	{
+		.pa_start	= 0x48300000,
+		.pa_end		= 0x48300000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.pa_start	= 0x48300100,
+		.pa_end		= 0x48300100 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_ecap0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_ecap0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ecap1_addr_space[] = {
+	{
+		.pa_start	= 0x48302000,
+		.pa_end		= 0x48302000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.pa_start	= 0x48302100,
+		.pa_end		= 0x48302100 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_ecap1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_ecap1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_ecap2_addr_space[] = {
+	{
+		.pa_start	= 0x48304000,
+		.pa_end		= 0x48304000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.pa_start	= 0x48304100,
+		.pa_end		= 0x48304100 + SZ_256 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__ecap2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_ecap2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_ecap2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3s cfg -> gpmc */
+static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x50000000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_gpmc_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_gpmc_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* i2c2 */
+static struct omap_hwmod_addr_space am33xx_i2c2_addr_space[] = {
+	{
+		.pa_start	= 0x4802A000,
+		.pa_end		= 0x4802A000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_i2c2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_i2c3_addr_space[] = {
+	{
+		.pa_start	= 0x4819C000,
+		.pa_end		= 0x4819C000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c3_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_i2c3_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
+	{
+		.pa_start	= 0x4830E000,
+		.pa_end		= 0x4830E000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_lcdc_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.addr		= am33xx_lcdc_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
+	{
+		.pa_start	= 0x480C8000,
+		.pa_end		= 0x480C8000 + (SZ_4K - 1),
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4 ls -> mailbox */
+static struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mailbox_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mailbox_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> spinlock */
+static struct omap_hwmod_addr_space am33xx_spinlock_addrs[] = {
+	{
+		.pa_start	= 0x480Ca000,
+		.pa_end		= 0x480Ca000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spinlock_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_spinlock_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp0 */
+static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
+	{
+		.pa_start	= 0x48038000,
+		.pa_end		= 0x48038000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 s -> mcasp0 data */
+static struct omap_hwmod_addr_space am33xx_mcasp0_data_addr_space[] = {
+	{
+		.pa_start	= 0x46000000,
+		.pa_end		= 0x46000000 + SZ_4M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__mcasp0_data = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_mcasp0_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_mcasp0_data_addr_space,
+	.user		= OCP_USER_SDMA,
+};
+
+/* l4 ls -> mcasp1 */
+static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
+	{
+		.pa_start	= 0x4803C000,
+		.pa_end		= 0x4803C000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 s -> mcasp1 data */
+static struct omap_hwmod_addr_space am33xx_mcasp1_data_addr_space[] = {
+	{
+		.pa_start	= 0x46400000,
+		.pa_end		= 0x46400000 + SZ_4M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__mcasp1_data = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_mcasp1_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_mcasp1_data_addr_space,
+	.user		= OCP_USER_SDMA,
+};
+
+/* l4 ls -> mmc0 */
+static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
+	{
+		.pa_start	= 0x48060100,
+		.pa_end		= 0x48060100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc1 */
+static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
+	{
+		.pa_start	= 0x481d8100,
+		.pa_end		= 0x481d8100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 s -> mmc2 */
+static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
+	{
+		.pa_start	= 0x47810100,
+		.pa_end		= 0x47810100 + SZ_64K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_mmc2_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_mmc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi0 */
+static struct omap_hwmod_addr_space am33xx_mcspi0_addr_space[] = {
+	{
+		.pa_start	= 0x48030000,
+		.pa_end		= 0x48030000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcspi0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi1 */
+static struct omap_hwmod_addr_space am33xx_mcspi1_addr_space[] = {
+	{
+		.pa_start	= 0x481A0000,
+		.pa_end		= 0x481A0000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcspi1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 wkup -> timer1 */
+static struct omap_hwmod_addr_space am33xx_timer1_addr_space[] = {
+	{
+		.pa_start	= 0x44E31000,
+		.pa_end		= 0x44E31000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_timer1_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_timer1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer2 */
+static struct omap_hwmod_addr_space am33xx_timer2_addr_space[] = {
+	{
+		.pa_start	= 0x48040000,
+		.pa_end		= 0x48040000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_timer2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer3 */
+static struct omap_hwmod_addr_space am33xx_timer3_addr_space[] = {
+	{
+		.pa_start	= 0x48042000,
+		.pa_end		= 0x48042000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer3_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_timer3_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer4 */
+static struct omap_hwmod_addr_space am33xx_timer4_addr_space[] = {
+	{
+		.pa_start	= 0x48044000,
+		.pa_end		= 0x48044000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer4_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_timer4_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer5 */
+static struct omap_hwmod_addr_space am33xx_timer5_addr_space[] = {
+	{
+		.pa_start	= 0x48046000,
+		.pa_end		= 0x48046000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer5_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_timer5_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer6 */
+static struct omap_hwmod_addr_space am33xx_timer6_addr_space[] = {
+	{
+		.pa_start	= 0x48048000,
+		.pa_end		= 0x48048000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer6_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_timer6_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer7 */
+static struct omap_hwmod_addr_space am33xx_timer7_addr_space[] = {
+	{
+		.pa_start	= 0x4804A000,
+		.pa_end		= 0x4804A000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer7_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_timer7_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc */
+static struct omap_hwmod_addr_space am33xx_tpcc_addr_space[] = {
+	{
+		.pa_start	= 0x49000000,
+		.pa_end		= 0x49000000 + SZ_32K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tpcc_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tpcc_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc0 */
+static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
+	{
+		.pa_start	= 0x49800000,
+		.pa_end		= 0x49800000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc0_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc1 */
+static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
+	{
+		.pa_start	= 0x49900000,
+		.pa_end		= 0x49900000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc1_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc2 */
+static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
+	{
+		.pa_start	= 0x49a00000,
+		.pa_end		= 0x49a00000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc2_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 wkup -> uart1 */
+static struct omap_hwmod_addr_space am33xx_uart1_addr_space[] = {
+	{
+		.pa_start	= 0x44E09000,
+		.pa_end		= 0x44E09000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_uart1_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_uart1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart2 */
+static struct omap_hwmod_addr_space am33xx_uart2_addr_space[] = {
+	{
+		.pa_start	= 0x48022000,
+		.pa_end		= 0x48022000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_uart2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart3 */
+static struct omap_hwmod_addr_space am33xx_uart3_addr_space[] = {
+	{
+		.pa_start	= 0x48024000,
+		.pa_end		= 0x48024000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart3_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_uart3_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart4 */
+static struct omap_hwmod_addr_space am33xx_uart4_addr_space[] = {
+	{
+		.pa_start	= 0x481A6000,
+		.pa_end		= 0x481A6000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart4_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_uart4_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart5 */
+static struct omap_hwmod_addr_space am33xx_uart5_addr_space[] = {
+	{
+		.pa_start	= 0x481A8000,
+		.pa_end		= 0x481A8000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart5_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_uart5_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart6 */
+static struct omap_hwmod_addr_space am33xx_uart6_addr_space[] = {
+	{
+		.pa_start	= 0x481aa000,
+		.pa_end		= 0x481aa000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart6_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_uart6_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 wkup -> wd_timer1 */
+static struct omap_hwmod_addr_space am33xx_wd_timer1_addrs[] = {
+	{
+		.pa_start	= 0x44e35000,
+		.pa_end		= 0x44e35000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_wd_timer1_hwmod,
+	.clk		= "dpll_core_m4_div2_ck",
+	.addr		= am33xx_wd_timer1_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* usbss */
+/* l3 s -> USBSS interface */
+static struct omap_hwmod_addr_space am33xx_usbss_addr_space[] = {
+	{
+		.name		= "usbss",
+		.pa_start	= 0x47400000,
+		.pa_end		= 0x47400000 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "musb0",
+		.pa_start	= 0x47401000,
+		.pa_end		= 0x47401000 + SZ_2K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "musb1",
+		.pa_start	= 0x47401800,
+		.pa_end		= 0x47401800 + SZ_2K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_usbss_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_usbss_addr_space,
+	.user		= OCP_USER_MPU,
+	.flags		= OCPIF_SWSUP_IDLE,
+};
+
+static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
+	&am33xx_l4_fw__emif_fw,
+	&am33xx_l3_main__emif,
+	&am33xx_mpu__l3_main,
+	&am33xx_mpu__prcm,
+	&am33xx_l3_s__l4_ls,
+	&am33xx_l3_s__l4_wkup,
+	&am33xx_l3_s__l4_fw,
+	&am33xx_l3_main__l4_hs,
+	&am33xx_l3_main__l3_s,
+	&am33xx_l3_main__l3_instr,
+	&am33xx_l3_main__gfx,
+	&am33xx_l3_s__l3_main,
+	&am33xx_pruss__l3_main,
+	&am33xx_wkup_m3__l4_wkup,
+	&am33xx_gfx__l3_main,
+	&am33xx_l4_wkup__wkup_m3,
+	&am33xx_l4_wkup__control,
+	&am33xx_l4_wkup__smartreflex0,
+	&am33xx_l4_wkup__smartreflex1,
+	&am33xx_l4_wkup__uart1,
+	&am33xx_l4_wkup__timer1,
+	&am33xx_l4_wkup__rtc,
+	&am33xx_l4_wkup__i2c1,
+	&am33xx_l4_wkup__gpio0,
+	&am33xx_l4_wkup__adc_tsc,
+	&am33xx_l4_wkup__wd_timer1,
+	&am33xx_l4_hs__pruss,
+	&am33xx_l4_per__dcan0,
+	&am33xx_l4_per__dcan1,
+	&am33xx_l4_per__gpio1,
+	&am33xx_l4_per__gpio2,
+	&am33xx_l4_per__gpio3,
+	&am33xx_l4_per__i2c2,
+	&am33xx_l4_per__i2c3,
+	&am33xx_l4_per__mailbox,
+	&am33xx_l4_ls__mcasp0,
+	&am33xx_l3_s__mcasp0_data,
+	&am33xx_l4_ls__mcasp1,
+	&am33xx_l3_s__mcasp1_data,
+	&am33xx_l4_ls__mmc0,
+	&am33xx_l4_ls__mmc1,
+	&am33xx_l3_s__mmc2,
+	&am33xx_l4_ls__timer2,
+	&am33xx_l4_ls__timer3,
+	&am33xx_l4_ls__timer4,
+	&am33xx_l4_ls__timer5,
+	&am33xx_l4_ls__timer6,
+	&am33xx_l4_ls__timer7,
+	&am33xx_l3_main__tpcc,
+	&am33xx_l4_ls__uart2,
+	&am33xx_l4_ls__uart3,
+	&am33xx_l4_ls__uart4,
+	&am33xx_l4_ls__uart5,
+	&am33xx_l4_ls__uart6,
+	&am33xx_l4_ls__spinlock,
+	&am33xx_l4_ls__elm,
+	&am33xx_l4_ls__ehrpwm0,
+	&am33xx_l4_ls__ehrpwm1,
+	&am33xx_l4_ls__ehrpwm2,
+	&am33xx_l4_ls__ecap0,
+	&am33xx_l4_ls__ecap1,
+	&am33xx_l4_ls__ecap2,
+	&am33xx_l3_s__gpmc,
+	&am33xx_l3_main__lcdc,
+	&am33xx_l4_ls__mcspi0,
+	&am33xx_l4_ls__mcspi1,
+	&am33xx_l3_main__tptc0,
+	&am33xx_l3_main__tptc1,
+	&am33xx_l3_main__tptc2,
+	&am33xx_l3_s__usbss,
+	&am33xx_l4_hs__cpgmac0,
+	NULL,
+};
+
+int __init am33xx_hwmod_init(void)
+{
+	omap_hwmod_init();
+	return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs);
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c9e38200216b..285777241d5a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -15,26 +15,27 @@
  * XXX these should be marked initdata for multi-OMAP kernels
  */
 #include <linux/power/smartreflex.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
-#include <plat/l3_3xxx.h>
-#include <plat/l4_3xxx.h>
+#include "l3_3xxx.h"
+#include "l4_3xxx.h"
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mmc.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <plat/dmtimer.h>
+#include <plat/iommu.h>
 
+#include "am35xx.h"
+
+#include "soc.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
-#include <mach/am35xx.h>
 
 /*
  * OMAP3xxx hardware module integration data
@@ -51,9 +52,9 @@
 
 /* L3 */
 static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
-	{ .irq = INT_34XX_L3_DBG_IRQ },
-	{ .irq = INT_34XX_L3_APP_IRQ },
-	{ .irq = -1 }
+	{ .irq = 9 + OMAP_INTC_START, },
+	{ .irq = 10 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_l3_main_hwmod = {
@@ -92,17 +93,23 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
 };
 
 /* MPU */
+static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = {
+	{ .name = "pmu", .irq = 3 },
+	{ .irq = -1 }
+};
+
 static struct omap_hwmod omap3xxx_mpu_hwmod = {
 	.name		= "mpu",
+	.mpu_irqs	= omap3xxx_mpu_irqs,
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "arm_fck",
 };
 
 /* IVA2 (IVA2) */
 static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
-	{ .name = "logic", .rst_shift = 0 },
-	{ .name = "seq0", .rst_shift = 1 },
-	{ .name = "seq1", .rst_shift = 2 },
+	{ .name = "logic", .rst_shift = 0, .st_shift = 8 },
+	{ .name = "seq0", .rst_shift = 1, .st_shift = 9 },
+	{ .name = "seq1", .rst_shift = 2, .st_shift = 10 },
 };
 
 static struct omap_hwmod omap3xxx_iva_hwmod = {
@@ -112,6 +119,33 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
 	.rst_lines	= omap3xxx_iva_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_iva_resets),
 	.main_clk	= "iva2_ck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = OMAP3430_IVA2_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
+		}
+	},
+};
+
+/*
+ * 'debugss' class
+ * debug and emulation sub system
+ */
+
+static struct omap_hwmod_class omap3xxx_debugss_hwmod_class = {
+	.name	= "debugss",
+};
+
+/* debugss */
+static struct omap_hwmod omap3xxx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &omap3xxx_debugss_hwmod_class,
+	.clkdm_name	= "emu_clkdm",
+	.main_clk	= "emu_src_ck",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* timer class */
@@ -161,6 +195,16 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
 	.timer_capability	= OMAP_TIMER_HAS_PWM,
 };
 
+/* timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
+	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ,
+};
+
+/* pwm timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
+	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
+};
+
 /* timer1 */
 static struct omap_hwmod omap3xxx_timer1_hwmod = {
 	.name		= "timer1",
@@ -244,6 +288,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -261,6 +306,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -278,6 +324,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -295,7 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
+	.dev_attr	= &capability_dsp_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
@@ -355,8 +402,8 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
 
 /* timer12 */
 static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
-	{ .irq = 95, },
-	{ .irq = -1 }
+	{ .irq = 95 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_timer12_hwmod = {
@@ -490,8 +537,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 
 /* UART4 */
 static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
-	{ .irq = INT_36XX_UART4_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 80 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
@@ -518,8 +565,8 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 };
 
 static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
-	{ .irq = INT_35XX_UART4_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 84 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
@@ -674,8 +721,8 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
-	{ .irq = 25 },
-	{ .irq = -1 }
+	{ .irq = 25 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 /* dss_dsi1 */
@@ -804,8 +851,8 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = {
 };
 
 static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
-	{ .irq = INT_34XX_I2C3_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 61 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
@@ -963,8 +1010,8 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 
 /* gpio5 */
 static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
-	{ .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
-	{ .irq = -1 }
+	{ .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
@@ -993,8 +1040,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 
 /* gpio6 */
 static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
-	{ .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
-	{ .irq = -1 }
+	{ .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
@@ -1098,10 +1145,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
-	{ .name = "common", .irq = 16 },
-	{ .name = "tx", .irq = 59 },
-	{ .name = "rx", .irq = 60 },
-	{ .irq = -1 }
+	{ .name = "common", .irq = 16 + OMAP_INTC_START, },
+	{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
@@ -1125,10 +1172,10 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
-	{ .name = "common", .irq = 17 },
-	{ .name = "tx", .irq = 62 },
-	{ .name = "rx", .irq = 63 },
-	{ .irq = -1 }
+	{ .name = "common", .irq = 17 + OMAP_INTC_START, },
+	{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
@@ -1157,10 +1204,10 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
-	{ .name = "common", .irq = 22 },
-	{ .name = "tx", .irq = 89 },
-	{ .name = "rx", .irq = 90 },
-	{ .irq = -1 }
+	{ .name = "common", .irq = 22 + OMAP_INTC_START, },
+	{ .name = "tx", .irq = 89 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 90 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
@@ -1189,10 +1236,10 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
-	{ .name = "common", .irq = 23 },
-	{ .name = "tx", .irq = 54 },
-	{ .name = "rx", .irq = 55 },
-	{ .irq = -1 }
+	{ .name = "common", .irq = 23 + OMAP_INTC_START, },
+	{ .name = "tx", .irq = 54 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 55 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
@@ -1222,10 +1269,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 
 /* mcbsp5 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
-	{ .name = "common", .irq = 27 },
-	{ .name = "tx", .irq = 81 },
-	{ .name = "rx", .irq = 82 },
-	{ .irq = -1 }
+	{ .name = "common", .irq = 27 + OMAP_INTC_START, },
+	{ .name = "tx", .irq = 81 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 82 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
@@ -1267,8 +1314,8 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
 
 /* mcbsp2_sidetone */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
-	{ .name = "irq", .irq = 4 },
-	{ .irq = -1 }
+	{ .name = "irq", .irq = 4 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
@@ -1289,8 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 
 /* mcbsp3_sidetone */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
-	{ .name = "irq", .irq = 5 },
-	{ .irq = -1 }
+	{ .name = "irq", .irq = 5 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
@@ -1352,8 +1399,8 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = {
 };
 
 static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
-	{ .irq = 18 },
-	{ .irq = -1 }
+	{ .irq = 18 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap34xx_sr1_hwmod = {
@@ -1397,8 +1444,8 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = {
 };
 
 static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
-	{ .irq = 19 },
-	{ .irq = -1 }
+	{ .irq = 19 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap34xx_sr2_hwmod = {
@@ -1458,8 +1505,8 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
 };
 
 static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
-	{ .irq = 26 },
-	{ .irq = -1 }
+	{ .irq = 26 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_mailbox_hwmod = {
@@ -1549,8 +1596,8 @@ static struct omap_hwmod omap34xx_mcspi2 = {
 
 /* mcspi3 */
 static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
-	{ .name = "irq", .irq = 91 }, /* 91 */
-	{ .irq = -1 }
+	{ .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
@@ -1585,8 +1632,8 @@ static struct omap_hwmod omap34xx_mcspi3 = {
 
 /* mcspi4 */
 static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
-	{ .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
-	{ .irq = -1 }
+	{ .name = "irq", .irq = 48 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
@@ -1638,9 +1685,9 @@ static struct omap_hwmod_class usbotg_class = {
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
 
-	{ .name = "mc", .irq = 92 },
-	{ .name = "dma", .irq = 93 },
-	{ .irq = -1 }
+	{ .name = "mc", .irq = 92 + OMAP_INTC_START, },
+	{ .name = "dma", .irq = 93 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
@@ -1670,8 +1717,8 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-	{ .name = "mc", .irq = 71 },
-	{ .irq = -1 }
+	{ .name = "mc", .irq = 71 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_class am35xx_usbotg_class = {
@@ -1706,8 +1753,8 @@ static struct omap_hwmod_class omap34xx_mmc_class = {
 /* MMC/SD/SDIO1 */
 
 static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
-	{ .irq = 83, },
-	{ .irq = -1 }
+	{ .irq = 83 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
@@ -1773,8 +1820,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
 /* MMC/SD/SDIO2 */
 
 static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
-	{ .irq = INT_24XX_MMC2_IRQ, },
-	{ .irq = -1 }
+	{ .irq = 86 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
@@ -1834,8 +1881,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 /* MMC/SD/SDIO3 */
 
 static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
-	{ .irq = 94, },
-	{ .irq = -1 }
+	{ .irq = 94 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
@@ -1893,9 +1940,9 @@ static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
 };
 
 static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
-	{ .name = "ohci-irq", .irq = 76 },
-	{ .name = "ehci-irq", .irq = 77 },
-	{ .irq = -1 }
+	{ .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
+	{ .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
@@ -1987,8 +2034,8 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
 };
 
 static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
-	{ .name = "tll-irq", .irq = 78 },
-	{ .irq = -1 }
+	{ .name = "tll-irq", .irq = 78 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
@@ -2024,6 +2071,33 @@ static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
 	.class		= &omap2_hdq1w_class,
 };
 
+/* SAD2D */
+static struct omap_hwmod_rst_info omap3xxx_sad2d_resets[] = {
+	{ .name = "rst_modem_pwron_sw", .rst_shift = 0 },
+	{ .name = "rst_modem_sw", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_class omap3xxx_sad2d_class = {
+	.name			= "sad2d",
+};
+
+static struct omap_hwmod omap3xxx_sad2d_hwmod = {
+	.name		= "sad2d",
+	.rst_lines	= omap3xxx_sad2d_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_sad2d_resets),
+	.main_clk	= "sad2d_ick",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SAD2D_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_SAD2D_SHIFT,
+		},
+	},
+	.class		= &omap3xxx_sad2d_class,
+};
+
 /*
  * '32K sync counter' class
  * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
@@ -2059,6 +2133,49 @@ static struct omap_hwmod omap3xxx_counter_32k_hwmod = {
 };
 
 /*
+ * 'gpmc' class
+ * general purpose memory controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_gpmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = {
+	.name	= "gpmc",
+	.sysc	= &omap3xxx_gpmc_sysc,
+};
+
+static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = {
+	{ .irq = 20 },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &omap3xxx_gpmc_hwmod_class,
+	.clkdm_name	= "core_l3_clkdm",
+	.mpu_irqs	= omap3xxx_gpmc_irqs,
+	.main_clk	= "gpmc_fck",
+	/*
+	 * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
+	 * block.  It is not being added due to any known bugs with
+	 * resetting the GPMC IP block, but rather because any timings
+	 * set by the bootloader are not being correctly programmed by
+	 * the kernel from the board file or DT data.
+	 * HWMOD_INIT_NO_RESET should be removed ASAP.
+	 */
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+			   HWMOD_NO_IDLEST),
+};
+
+/*
  * interfaces
  */
 
@@ -2093,6 +2210,23 @@ static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
 	.user	= OCP_USER_MPU,
 };
 
+static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = {
+	{
+		.pa_start	= 0x54000000,
+		.pa_end		= 0x547fffff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l3 -> debugss */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = {
+	.master		= &omap3xxx_l3_main_hwmod,
+	.slave		= &omap3xxx_debugss_hwmod,
+	.addr		= omap3xxx_l4_emu_addrs,
+	.user		= OCP_USER_MPU,
+};
+
 /* DSS -> l3 */
 static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = {
 	.master		= &omap3430es1_dss_core_hwmod,
@@ -2128,6 +2262,14 @@ static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
 	.user		= OCP_USER_MPU,
 };
 
+/* l3_core -> sad2d interface */
+static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
+	.master		= &omap3xxx_sad2d_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU,
+};
+
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
 	.master	= &omap3xxx_l4_core_hwmod,
@@ -2814,6 +2956,122 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/*
+ * 'mmu' class
+ * The memory management unit performs virtual to physical address translation
+ * for its requestors.
+ */
+
+static struct omap_hwmod_class_sysconfig mmu_sysc = {
+	.rev_offs	= 0x000,
+	.sysc_offs	= 0x010,
+	.syss_offs	= 0x014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = {
+	.name = "mmu",
+	.sysc = &mmu_sysc,
+};
+
+/* mmu isp */
+
+static struct omap_mmu_dev_attr mmu_isp_dev_attr = {
+	.da_start	= 0x0,
+	.da_end		= 0xfffff000,
+	.nr_tlb_entries = 8,
+};
+
+static struct omap_hwmod omap3xxx_mmu_isp_hwmod;
+static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = {
+	{ .irq = 24 },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = {
+	{
+		.pa_start	= 0x480bd400,
+		.pa_end		= 0x480bd47f,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l4_core -> mmu isp */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_mmu_isp_hwmod,
+	.addr		= omap3xxx_mmu_isp_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
+	.name		= "mmu_isp",
+	.class		= &omap3xxx_mmu_hwmod_class,
+	.mpu_irqs	= omap3xxx_mmu_isp_irqs,
+	.main_clk	= "cam_ick",
+	.dev_attr	= &mmu_isp_dev_attr,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+#ifdef CONFIG_OMAP_IOMMU_IVA2
+
+/* mmu iva */
+
+static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
+	.da_start	= 0x11000000,
+	.da_end		= 0xfffff000,
+	.nr_tlb_entries = 32,
+};
+
+static struct omap_hwmod omap3xxx_mmu_iva_hwmod;
+static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = {
+	{ .irq = 28 },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = {
+	{ .name = "mmu", .rst_shift = 1, .st_shift = 9 },
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = {
+	{
+		.pa_start	= 0x5d000000,
+		.pa_end		= 0x5d00007f,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l3_main -> iva mmu */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = {
+	.master		= &omap3xxx_l3_main_hwmod,
+	.slave		= &omap3xxx_mmu_iva_hwmod,
+	.addr		= omap3xxx_mmu_iva_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
+	.name		= "mmu_iva",
+	.class		= &omap3xxx_mmu_hwmod_class,
+	.mpu_irqs	= omap3xxx_mmu_iva_irqs,
+	.rst_lines	= omap3xxx_mmu_iva_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_mmu_iva_resets),
+	.main_clk	= "iva2_ck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = OMAP3430_IVA2_MOD,
+		},
+	},
+	.dev_attr	= &mmu_iva_dev_attr,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+#endif
+
 /* l4_per -> gpio4 */
 static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
 	{
@@ -3159,6 +3417,15 @@ static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = {
 	{ }
 };
 
+static struct omap_hwmod_addr_space omap3xxx_gpmc_addrs[] = {
+	{
+		.pa_start	= 0x6e000000,
+		.pa_end		= 0x6e000fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
 	.master		= &omap3xxx_l4_wkup_hwmod,
 	.slave		= &omap3xxx_counter_32k_hwmod,
@@ -3214,11 +3481,11 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = {
 };
 
 static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = {
-	{ .name = "rxthresh",	.irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ },
-	{ .name = "rx_pulse",	.irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ },
-	{ .name = "tx_pulse",	.irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ },
-	{ .name = "misc_pulse",	.irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ },
-	{ .irq = -1 }
+	{ .name = "rxthresh",	.irq = 67 + OMAP_INTC_START, },
+	{ .name = "rx_pulse",	.irq = 68 + OMAP_INTC_START, },
+	{ .name = "tx_pulse",	.irq = 69 + OMAP_INTC_START },
+	{ .name = "misc_pulse",	.irq = 70 + OMAP_INTC_START },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_class am35xx_emac_class = {
@@ -3268,10 +3535,19 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__emac = {
 	.user		= OCP_USER_MPU,
 };
 
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = {
+	.master		= &omap3xxx_l3_main_hwmod,
+	.slave		= &omap3xxx_gpmc_hwmod,
+	.clk		= "core_l3_ick",
+	.addr		= omap3xxx_gpmc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
 	&omap3xxx_mpu__l3_main,
+	&omap3xxx_l3_main__l4_debugss,
 	&omap3xxx_l4_core__l4_wkup,
 	&omap3xxx_l4_core__mmc3,
 	&omap3_l4_core__uart1,
@@ -3313,6 +3589,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap34xx_l4_core__mcspi3,
 	&omap34xx_l4_core__mcspi4,
 	&omap3xxx_l4_wkup__counter_32k,
+	&omap3xxx_l3_main__gpmc,
 	NULL,
 };
 
@@ -3362,6 +3639,11 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 	&omap34xx_l4_core__sr2,
 	&omap3xxx_l4_core__mailbox,
 	&omap3xxx_l4_core__hdq1w,
+	&omap3xxx_sad2d__l3,
+	&omap3xxx_l4_core__mmu_isp,
+#ifdef CONFIG_OMAP_IOMMU_IVA2
+	&omap3xxx_l3_main__mmu_iva,
+#endif
 	NULL
 };
 
@@ -3382,6 +3664,11 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__es3plus_mmc1,
 	&omap3xxx_l4_core__es3plus_mmc2,
 	&omap3xxx_l4_core__hdq1w,
+	&omap3xxx_sad2d__l3,
+	&omap3xxx_l4_core__mmu_isp,
+#ifdef CONFIG_OMAP_IOMMU_IVA2
+	&omap3xxx_l3_main__mmu_iva,
+#endif
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 242aee498ceb..8d7a93525bc6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,18 +19,18 @@
  */
 
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/dma.h>
-#include <plat/mcspi.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <plat/mmc.h>
 #include <plat/dmtimer.h>
 #include <plat/common.h>
+#include <plat/iommu.h>
 
 #include "omap_hwmod_common_data.h"
 #include "cm1_44xx.h"
@@ -203,6 +203,9 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = {
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
+			.lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK,
+			.flags	      = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
 		},
 	},
 };
@@ -259,6 +262,11 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = {
 	.name		= "mpu_private",
 	.class		= &omap44xx_mpu_bus_hwmod_class,
 	.clkdm_name	= "mpuss_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /*
@@ -343,6 +351,7 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
 			.context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
+			.lostcontext_mask = OMAP4430_LOSTCONTEXT_DFF_MASK,
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
@@ -447,6 +456,11 @@ static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = {
 	.class		= &omap44xx_ctrl_module_hwmod_class,
 	.clkdm_name	= "l4_cfg_clkdm",
 	.mpu_irqs	= omap44xx_ctrl_module_core_irqs,
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /* ctrl_module_pad_core */
@@ -454,6 +468,11 @@ static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = {
 	.name		= "ctrl_module_pad_core",
 	.class		= &omap44xx_ctrl_module_hwmod_class,
 	.clkdm_name	= "l4_cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /* ctrl_module_wkup */
@@ -461,6 +480,11 @@ static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = {
 	.name		= "ctrl_module_wkup",
 	.class		= &omap44xx_ctrl_module_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /* ctrl_module_pad_wkup */
@@ -468,6 +492,11 @@ static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = {
 	.name		= "ctrl_module_pad_wkup",
 	.class		= &omap44xx_ctrl_module_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /*
@@ -612,7 +641,6 @@ static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = {
 
 static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
 	{ .name = "dsp", .rst_shift = 0 },
-	{ .name = "mmu_cache", .rst_shift = 1 },
 };
 
 static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1324,6 +1352,14 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &omap44xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3_2_clkdm",
+	/*
+	 * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
+	 * block.  It is not being added due to any known bugs with
+	 * resetting the GPMC IP block, but rather because any timings
+	 * set by the bootloader are not being correctly programmed by
+	 * the kernel from the board file or DT data.
+	 * HWMOD_INIT_NO_RESET should be removed ASAP.
+	 */
 	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
 	.mpu_irqs	= omap44xx_gpmc_irqs,
 	.sdma_reqs	= omap44xx_gpmc_sdma_reqs,
@@ -1632,7 +1668,6 @@ static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = {
 static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
 	{ .name = "cpu0", .rst_shift = 0 },
 	{ .name = "cpu1", .rst_shift = 1 },
-	{ .name = "mmu_cache", .rst_shift = 2 },
 };
 
 static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2439,6 +2474,137 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = {
 };
 
 /*
+ * 'mmu' class
+ * The memory management unit performs virtual to physical address translation
+ * for its requestors.
+ */
+
+static struct omap_hwmod_class_sysconfig mmu_sysc = {
+	.rev_offs	= 0x000,
+	.sysc_offs	= 0x010,
+	.syss_offs	= 0x014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
+	.name = "mmu",
+	.sysc = &mmu_sysc,
+};
+
+/* mmu ipu */
+
+static struct omap_mmu_dev_attr mmu_ipu_dev_attr = {
+	.da_start	= 0x0,
+	.da_end		= 0xfffff000,
+	.nr_tlb_entries = 32,
+};
+
+static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
+static struct omap_hwmod_irq_info omap44xx_mmu_ipu_irqs[] = {
+	{ .irq = 100 + OMAP44XX_IRQ_GIC_START, },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
+	{ .name = "mmu_cache", .rst_shift = 2 },
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = {
+	{
+		.pa_start	= 0x55082000,
+		.pa_end		= 0x550820ff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l3_main_2 -> mmu_ipu */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_mmu_ipu_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_mmu_ipu_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
+	.name		= "mmu_ipu",
+	.class		= &omap44xx_mmu_hwmod_class,
+	.clkdm_name	= "ducati_clkdm",
+	.mpu_irqs	= omap44xx_mmu_ipu_irqs,
+	.rst_lines	= omap44xx_mmu_ipu_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_mmu_ipu_resets),
+	.main_clk	= "ducati_clk_mux_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
+			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
+			.context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.dev_attr	= &mmu_ipu_dev_attr,
+};
+
+/* mmu dsp */
+
+static struct omap_mmu_dev_attr mmu_dsp_dev_attr = {
+	.da_start	= 0x0,
+	.da_end		= 0xfffff000,
+	.nr_tlb_entries = 32,
+};
+
+static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
+static struct omap_hwmod_irq_info omap44xx_mmu_dsp_irqs[] = {
+	{ .irq = 28 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
+	{ .name = "mmu_cache", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = {
+	{
+		.pa_start	= 0x4a066000,
+		.pa_end		= 0x4a0660ff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l4_cfg -> dsp */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_mmu_dsp_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mmu_dsp_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
+	.name		= "mmu_dsp",
+	.class		= &omap44xx_mmu_hwmod_class,
+	.clkdm_name	= "tesla_clkdm",
+	.mpu_irqs	= omap44xx_mmu_dsp_irqs,
+	.rst_lines	= omap44xx_mmu_dsp_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_mmu_dsp_resets),
+	.main_clk	= "dpll_iva_m4x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
+			.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
+			.context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.dev_attr	= &mmu_dsp_dev_attr,
+};
+
+/*
  * 'mpu' class
  * mpu sub-system
  */
@@ -2449,6 +2615,8 @@ static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
 
 /* mpu */
 static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
+	{ .name = "pmu0", .irq = 54 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "pmu1", .irq = 55 + OMAP44XX_IRQ_GIC_START },
 	{ .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
 	{ .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
 	{ .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
@@ -2498,19 +2666,27 @@ static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
  * protocol
  */
 
+static struct omap_hwmod_class_sysconfig omap44xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
 	.name	= "ocp2scp",
+	.sysc	= &omap44xx_ocp2scp_sysc,
 };
 
 /* ocp2scp_usb_phy */
-static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
-	{ .role = "phy_48m", .clk = "ocp2scp_usb_phy_phy_48m" },
-};
-
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
 	.class		= &omap44xx_ocp2scp_hwmod_class,
 	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "ocp2scp_usb_phy_phy_48m",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
@@ -2518,8 +2694,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.opt_clks	= ocp2scp_usb_phy_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*
@@ -2537,18 +2711,36 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = {
 	.name		= "prcm_mpu",
 	.class		= &omap44xx_prcm_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_NO_IDLEST,
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /* cm_core_aon */
 static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
 	.name		= "cm_core_aon",
 	.class		= &omap44xx_prcm_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /* cm_core */
 static struct omap_hwmod omap44xx_cm_core_hwmod = {
 	.name		= "cm_core",
 	.class		= &omap44xx_prcm_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /* prm */
@@ -2584,6 +2776,11 @@ static struct omap_hwmod omap44xx_scrm_hwmod = {
 	.name		= "scrm",
 	.class		= &omap44xx_scrm_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
 };
 
 /*
@@ -2902,6 +3099,16 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
 	.timer_capability	= OMAP_TIMER_HAS_PWM,
 };
 
+/* timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
+	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ,
+};
+
+/* pwm timers with DSP interrupt dev attribute */
+static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
+	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
+};
+
 /* timer1 */
 static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
 	{ .irq = 37 + OMAP44XX_IRQ_GIC_START },
@@ -3006,6 +3213,7 @@ static struct omap_hwmod omap44xx_timer5_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 };
 
 /* timer6 */
@@ -3028,6 +3236,7 @@ static struct omap_hwmod omap44xx_timer6_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 };
 
 /* timer7 */
@@ -3049,6 +3258,7 @@ static struct omap_hwmod omap44xx_timer7_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
+	.dev_attr	= &capability_dsp_dev_attr,
 };
 
 /* timer8 */
@@ -3070,7 +3280,7 @@ static struct omap_hwmod omap44xx_timer8_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
+	.dev_attr	= &capability_dsp_pwm_dev_attr,
 };
 
 /* timer9 */
@@ -4210,7 +4420,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
 };
 
 /* dsp -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
 	.master		= &omap44xx_dsp_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "dpll_iva_m5x2_ck",
@@ -4828,7 +5038,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
 };
 
 /* iva -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
 	.master		= &omap44xx_iva_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "dpll_iva_m5x2_ck",
@@ -5263,11 +5473,21 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_addr_space omap44xx_ocp2scp_usb_phy_addrs[] = {
+	{
+		.pa_start	= 0x4a0ad000,
+		.pa_end		= 0x4a0ad01f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
 /* l4_cfg -> ocp2scp_usb_phy */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp2scp_usb_phy = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_ocp2scp_usb_phy_hwmod,
 	.clk		= "l4_div_ck",
+	.addr		= omap44xx_ocp2scp_usb_phy_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -5362,7 +5582,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
 };
 
 /* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "l3_div_ck",
@@ -5887,7 +6107,13 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
 static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
 	{
 		.pa_start	= 0x4a0ab000,
-		.pa_end		= 0x4a0ab003,
+		.pa_end		= 0x4a0ab7ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		/* XXX: Remove this once control module driver is in place */
+		.pa_start	= 0x4a00233c,
+		.pa_end		= 0x4a00233f,
 		.flags		= ADDR_TYPE_RT
 	},
 	{ }
@@ -6032,7 +6258,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_abe__dmic,
 	&omap44xx_l4_abe__dmic_dma,
 	&omap44xx_dsp__iva,
-	&omap44xx_dsp__sl2if,
+	/* &omap44xx_dsp__sl2if, */
 	&omap44xx_l4_cfg__dsp,
 	&omap44xx_l3_main_2__dss,
 	&omap44xx_l4_per__dss,
@@ -6068,7 +6294,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__i2c4,
 	&omap44xx_l3_main_2__ipu,
 	&omap44xx_l3_main_2__iss,
-	&omap44xx_iva__sl2if,
+	/* &omap44xx_iva__sl2if, */
 	&omap44xx_l3_main_2__iva,
 	&omap44xx_l4_wkup__kbd,
 	&omap44xx_l4_cfg__mailbox,
@@ -6092,6 +6318,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__mmc3,
 	&omap44xx_l4_per__mmc4,
 	&omap44xx_l4_per__mmc5,
+	&omap44xx_l3_main_2__mmu_ipu,
+	&omap44xx_l4_cfg__mmu_dsp,
 	&omap44xx_l3_main_2__ocmc_ram,
 	&omap44xx_l4_cfg__ocp2scp_usb_phy,
 	&omap44xx_mpu_private__prcm_mpu,
@@ -6099,7 +6327,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__cm_core,
 	&omap44xx_l4_wkup__prm,
 	&omap44xx_l4_wkup__scrm,
-	&omap44xx_l3_main_2__sl2if,
+	/* &omap44xx_l3_main_2__sl2if, */
 	&omap44xx_l4_abe__slimbus1,
 	&omap44xx_l4_abe__slimbus1_dma,
 	&omap44xx_l4_per__slimbus2,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index e7e8eeae95e5..2bc8f1705d4a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -2,9 +2,8 @@
  * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations
  *
  * Copyright (C) 2010-2011 Nokia Corporation
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
  * Paul Walmsley
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
  * Benoît Cousson
  *
  * This program is free software; you can redistribute it and/or modify
@@ -16,6 +15,7 @@
 
 #include <plat/omap_hwmod.h>
 
+#include "common.h"
 #include "display.h"
 
 /* Common address space across OMAP2xxx */
@@ -76,6 +76,8 @@ extern struct omap_hwmod omap2xxx_gpio4_hwmod;
 extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
 extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
 extern struct omap_hwmod omap2xxx_counter_32k_hwmod;
+extern struct omap_hwmod omap2xxx_gpmc_hwmod;
+extern struct omap_hwmod omap2xxx_rng_hwmod;
 
 /* Common interface data across OMAP2xxx */
 extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
@@ -102,6 +104,7 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng;
 
 /* Common IP block data */
 extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
deleted file mode 100644
index d15225ff5c49..000000000000
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include "omap_l3_noc.h"
-
-/*
- * Interrupt Handler for L3 error detection.
- *	1) Identify the L3 clockdomain partition to which the error belongs to.
- *	2) Identify the slave where the error information is logged
- *	3) Print the logged information.
- *	4) Add dump stack to provide kernel trace.
- *
- * Two Types of errors :
- *	1) Custom errors in L3 :
- *		Target like DMM/FW/EMIF generates SRESP=ERR error
- *	2) Standard L3 error:
- *		- Unsupported CMD.
- *			L3 tries to access target while it is idle
- *		- OCP disconnect.
- *		- Address hole error:
- *			If DSS/ISS/FDIF/USBHOSTFS access a target where they
- *			do not have connectivity, the error is logged in
- *			their default target which is DMM2.
- *
- *	On High Secure devices, firewall errors are possible and those
- *	can be trapped as well. But the trapping is implemented as part
- *	secure software and hence need not be implemented here.
- */
-static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
-{
-
-	struct omap4_l3 *l3 = _l3;
-	int inttype, i, k;
-	int err_src = 0;
-	u32 std_err_main, err_reg, clear, masterid;
-	void __iomem *base, *l3_targ_base;
-	char *target_name, *master_name = "UN IDENTIFIED";
-
-	/* Get the Type of interrupt */
-	inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
-
-	for (i = 0; i < L3_MODULES; i++) {
-		/*
-		 * Read the regerr register of the clock domain
-		 * to determine the source
-		 */
-		base = l3->l3_base[i];
-		err_reg = __raw_readl(base + l3_flagmux[i] +
-					+ L3_FLAGMUX_REGERR0 + (inttype << 3));
-
-		/* Get the corresponding error and analyse */
-		if (err_reg) {
-			/* Identify the source from control status register */
-			err_src = __ffs(err_reg);
-
-			/* Read the stderrlog_main_source from clk domain */
-			l3_targ_base = base + *(l3_targ[i] + err_src);
-			std_err_main =  __raw_readl(l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-			masterid = __raw_readl(l3_targ_base +
-					L3_TARG_STDERRLOG_MSTADDR);
-
-			switch (std_err_main & CUSTOM_ERROR) {
-			case STANDARD_ERROR:
-				target_name =
-					l3_targ_inst_name[i][err_src];
-				WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
-					target_name,
-					__raw_readl(l3_targ_base +
-						L3_TARG_STDERRLOG_SLVOFSLSB));
-				/* clear the std error log*/
-				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-				break;
-
-			case CUSTOM_ERROR:
-				target_name =
-					l3_targ_inst_name[i][err_src];
-				for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
-					if (masterid == l3_masters[k].id)
-						master_name =
-							l3_masters[k].name;
-				}
-				WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
-					master_name, target_name);
-				/* clear the std error log*/
-				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-				break;
-
-			default:
-				/* Nothing to be handled here as of now */
-				break;
-			}
-		/* Error found so break the for loop */
-		break;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __devinit omap4_l3_probe(struct platform_device *pdev)
-{
-	static struct omap4_l3 *l3;
-	struct resource	*res;
-	int ret;
-
-	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
-	if (!l3)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, l3);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 0\n");
-		ret = -ENODEV;
-		goto err0;
-	}
-
-	l3->l3_base[0] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[0]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err0;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 1\n");
-		ret = -ENODEV;
-		goto err1;
-	}
-
-	l3->l3_base[1] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[1]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 2\n");
-		ret = -ENODEV;
-		goto err2;
-	}
-
-	l3->l3_base[2] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[2]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err2;
-	}
-
-	/*
-	 * Setup interrupt Handlers
-	 */
-	l3->debug_irq = platform_get_irq(pdev, 0);
-	ret = request_irq(l3->debug_irq,
-			l3_interrupt_handler,
-			IRQF_DISABLED, "l3-dbg-irq", l3);
-	if (ret) {
-		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						OMAP44XX_IRQ_L3_DBG);
-		goto err3;
-	}
-
-	l3->app_irq = platform_get_irq(pdev, 1);
-	ret = request_irq(l3->app_irq,
-			l3_interrupt_handler,
-			IRQF_DISABLED, "l3-app-irq", l3);
-	if (ret) {
-		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						OMAP44XX_IRQ_L3_APP);
-		goto err4;
-	}
-
-	return 0;
-
-err4:
-	free_irq(l3->debug_irq, l3);
-err3:
-	iounmap(l3->l3_base[2]);
-err2:
-	iounmap(l3->l3_base[1]);
-err1:
-	iounmap(l3->l3_base[0]);
-err0:
-	kfree(l3);
-	return ret;
-}
-
-static int __devexit omap4_l3_remove(struct platform_device *pdev)
-{
-	struct omap4_l3 *l3 = platform_get_drvdata(pdev);
-
-	free_irq(l3->app_irq, l3);
-	free_irq(l3->debug_irq, l3);
-	iounmap(l3->l3_base[0]);
-	iounmap(l3->l3_base[1]);
-	iounmap(l3->l3_base[2]);
-	kfree(l3);
-
-	return 0;
-}
-
-#if defined(CONFIG_OF)
-static const struct of_device_id l3_noc_match[] = {
-	{.compatible = "ti,omap4-l3-noc", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, l3_noc_match);
-#else
-#define l3_noc_match NULL
-#endif
-
-static struct platform_driver omap4_l3_driver = {
-	.probe		= omap4_l3_probe,
-	.remove		= __devexit_p(omap4_l3_remove),
-	.driver		= {
-		.name		= "omap_l3_noc",
-		.owner		= THIS_MODULE,
-		.of_match_table = l3_noc_match,
-	},
-};
-
-static int __init omap4_l3_init(void)
-{
-	return platform_driver_register(&omap4_l3_driver);
-}
-postcore_initcall_sync(omap4_l3_init);
-
-static void __exit omap4_l3_exit(void)
-{
-	platform_driver_unregister(&omap4_l3_driver);
-}
-module_exit(omap4_l3_exit);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
deleted file mode 100644
index a6ce34dc4814..000000000000
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * OMAP4XXX L3 Interconnect  error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-
-#define L3_MODULES			3
-#define CLEAR_STDERR_LOG		(1 << 31)
-#define CUSTOM_ERROR			0x2
-#define STANDARD_ERROR			0x0
-#define INBAND_ERROR			0x0
-#define L3_APPLICATION_ERROR		0x0
-#define L3_DEBUG_ERROR			0x1
-
-/* L3 TARG register offsets */
-#define L3_TARG_STDERRLOG_MAIN		0x48
-#define L3_TARG_STDERRLOG_SLVOFSLSB	0x5c
-#define L3_TARG_STDERRLOG_MSTADDR	0x68
-#define L3_FLAGMUX_REGERR0		0xc
-
-#define NUM_OF_L3_MASTERS	(sizeof(l3_masters)/sizeof(l3_masters[0]))
-
-static u32 l3_flagmux[L3_MODULES] = {
-	0x500,
-	0x1000,
-	0X0200
-};
-
-/* L3 Target standard Error register offsets */
-static u32 l3_targ_inst_clk1[] = {
-	0x100, /* DMM1 */
-	0x200, /* DMM2 */
-	0x300, /* ABE */
-	0x400, /* L4CFG */
-	0x600,  /* CLK2 PWR DISC */
-	0x0,	/* Host CLK1 */
-	0x900	/* L4 Wakeup */
-};
-
-static u32 l3_targ_inst_clk2[] = {
-	0x500, /* CORTEX M3 */
-	0x300, /* DSS */
-	0x100, /* GPMC */
-	0x400, /* ISS */
-	0x700, /* IVAHD */
-	0xD00, /* missing in TRM  corresponds to AES1*/
-	0x900, /* L4 PER0*/
-	0x200, /* OCMRAM */
-	0x100, /* missing in TRM corresponds to GPMC sERROR*/
-	0x600, /* SGX */
-	0x800, /* SL2 */
-	0x1600, /* C2C */
-	0x1100,	/* missing in TRM corresponds PWR DISC CLK1*/
-	0xF00, /* missing in TRM corrsponds to SHA1*/
-	0xE00, /* missing in TRM corresponds to AES2*/
-	0xC00, /* L4 PER3 */
-	0xA00, /* L4 PER1*/
-	0xB00, /* L4 PER2*/
-	0x0, /* HOST CLK2 */
-	0x1800, /* CAL */
-	0x1700 /* LLI */
-};
-
-static u32 l3_targ_inst_clk3[] = {
-	0x0100	/* EMUSS */,
-	0x0300, /* DEBUGSS_CT_TBR */
-	0x0 /* HOST CLK3 */
-};
-
-static struct l3_masters_data {
-	u32 id;
-	char name[10];
-} l3_masters[] = {
-	{ 0x0 , "MPU"},
-	{ 0x10, "CS_ADP"},
-	{ 0x14, "xxx"},
-	{ 0x20, "DSP"},
-	{ 0x30, "IVAHD"},
-	{ 0x40, "ISS"},
-	{ 0x44, "DucatiM3"},
-	{ 0x48, "FaceDetect"},
-	{ 0x50, "SDMA_Rd"},
-	{ 0x54, "SDMA_Wr"},
-	{ 0x58, "xxx"},
-	{ 0x5C, "xxx"},
-	{ 0x60, "SGX"},
-	{ 0x70, "DSS"},
-	{ 0x80, "C2C"},
-	{ 0x88, "xxx"},
-	{ 0x8C, "xxx"},
-	{ 0x90, "HSI"},
-	{ 0xA0, "MMC1"},
-	{ 0xA4, "MMC2"},
-	{ 0xA8, "MMC6"},
-	{ 0xB0, "UNIPRO1"},
-	{ 0xC0, "USBHOSTHS"},
-	{ 0xC4, "USBOTGHS"},
-	{ 0xC8, "USBHOSTFS"}
-};
-
-static char *l3_targ_inst_name[L3_MODULES][21] = {
-	{
-		"DMM1",
-		"DMM2",
-		"ABE",
-		"L4CFG",
-		"CLK2 PWR DISC",
-		"HOST CLK1",
-		"L4 WAKEUP"
-	},
-	{
-		"CORTEX M3" ,
-		"DSS ",
-		"GPMC ",
-		"ISS ",
-		"IVAHD ",
-		"AES1",
-		"L4 PER0",
-		"OCMRAM ",
-		"GPMC sERROR",
-		"SGX ",
-		"SL2 ",
-		"C2C ",
-		"PWR DISC CLK1",
-		"SHA1",
-		"AES2",
-		"L4 PER3",
-		"L4 PER1",
-		"L4 PER2",
-		"HOST CLK2",
-		"CAL",
-		"LLI"
-	},
-	{
-		"EMUSS",
-		"DEBUG SOURCE",
-		"HOST CLK3"
-	},
-};
-
-static u32 *l3_targ[L3_MODULES] = {
-	l3_targ_inst_clk1,
-	l3_targ_inst_clk2,
-	l3_targ_inst_clk3,
-};
-
-struct omap4_l3 {
-	struct device *dev;
-	struct clk *ick;
-
-	/* memory base */
-	void __iomem *l3_base[L3_MODULES];
-
-	int debug_irq;
-	int app_irq;
-};
-#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
deleted file mode 100644
index acc216491b8a..000000000000
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- *	Felipe Balbi <balbi@ti.com>
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include "omap_l3_smx.h"
-
-static inline u64 omap3_l3_readll(void __iomem *base, u16 reg)
-{
-	return __raw_readll(base + reg);
-}
-
-static inline void omap3_l3_writell(void __iomem *base, u16 reg, u64 value)
-{
-	__raw_writell(value, base + reg);
-}
-
-static inline enum omap3_l3_code omap3_l3_decode_error_code(u64 error)
-{
-	return (error & 0x0f000000) >> L3_ERROR_LOG_CODE;
-}
-
-static inline u32 omap3_l3_decode_addr(u64 error_addr)
-{
-	return error_addr & 0xffffffff;
-}
-
-static inline unsigned omap3_l3_decode_cmd(u64 error)
-{
-	return (error & 0x07) >> L3_ERROR_LOG_CMD;
-}
-
-static inline enum omap3_l3_initiator_id omap3_l3_decode_initid(u64 error)
-{
-	return (error & 0xff00) >> L3_ERROR_LOG_INITID;
-}
-
-static inline unsigned omap3_l3_decode_req_info(u64 error)
-{
-	return (error >> 32) & 0xffff;
-}
-
-static char *omap3_l3_code_string(u8 code)
-{
-	switch (code) {
-	case OMAP_L3_CODE_NOERROR:
-		return "No Error";
-	case OMAP_L3_CODE_UNSUP_CMD:
-		return "Unsupported Command";
-	case OMAP_L3_CODE_ADDR_HOLE:
-		return "Address Hole";
-	case OMAP_L3_CODE_PROTECT_VIOLATION:
-		return "Protection Violation";
-	case OMAP_L3_CODE_IN_BAND_ERR:
-		return "In-band Error";
-	case OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT:
-		return "Request Timeout Not Accepted";
-	case OMAP_L3_CODE_REQ_TOUT_NO_RESP:
-		return "Request Timeout, no response";
-	default:
-		return "UNKNOWN error";
-	}
-}
-
-static char *omap3_l3_initiator_string(u8 initid)
-{
-	switch (initid) {
-	case OMAP_L3_LCD:
-		return "LCD";
-	case OMAP_L3_SAD2D:
-		return "SAD2D";
-	case OMAP_L3_IA_MPU_SS_1:
-	case OMAP_L3_IA_MPU_SS_2:
-	case OMAP_L3_IA_MPU_SS_3:
-	case OMAP_L3_IA_MPU_SS_4:
-	case OMAP_L3_IA_MPU_SS_5:
-		return "MPU";
-	case OMAP_L3_IA_IVA_SS_1:
-	case OMAP_L3_IA_IVA_SS_2:
-	case OMAP_L3_IA_IVA_SS_3:
-		return "IVA_SS";
-	case OMAP_L3_IA_IVA_SS_DMA_1:
-	case OMAP_L3_IA_IVA_SS_DMA_2:
-	case OMAP_L3_IA_IVA_SS_DMA_3:
-	case OMAP_L3_IA_IVA_SS_DMA_4:
-	case OMAP_L3_IA_IVA_SS_DMA_5:
-	case OMAP_L3_IA_IVA_SS_DMA_6:
-		return "IVA_SS_DMA";
-	case OMAP_L3_IA_SGX:
-		return "SGX";
-	case OMAP_L3_IA_CAM_1:
-	case OMAP_L3_IA_CAM_2:
-	case OMAP_L3_IA_CAM_3:
-		return "CAM";
-	case OMAP_L3_IA_DAP:
-		return "DAP";
-	case OMAP_L3_SDMA_WR_1:
-	case OMAP_L3_SDMA_WR_2:
-		return "SDMA_WR";
-	case OMAP_L3_SDMA_RD_1:
-	case OMAP_L3_SDMA_RD_2:
-	case OMAP_L3_SDMA_RD_3:
-	case OMAP_L3_SDMA_RD_4:
-		return "SDMA_RD";
-	case OMAP_L3_USBOTG:
-		return "USB_OTG";
-	case OMAP_L3_USBHOST:
-		return "USB_HOST";
-	default:
-		return "UNKNOWN Initiator";
-	}
-}
-
-/*
- * omap3_l3_block_irq - handles a register block's irq
- * @l3: struct omap3_l3 *
- * @base: register block base address
- * @error: L3_ERROR_LOG register of our block
- *
- * Called in hard-irq context. Caller should take care of locking
- *
- * OMAP36xx TRM gives, on page 2001, Figure 9-10, the Typical Error
- * Analysis Sequence, we are following that sequence here, please
- * refer to that Figure for more information on the subject.
- */
-static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
-					u64 error, int error_addr)
-{
-	u8 code = omap3_l3_decode_error_code(error);
-	u8 initid = omap3_l3_decode_initid(error);
-	u8 multi = error & L3_ERROR_LOG_MULTI;
-	u32 address = omap3_l3_decode_addr(error_addr);
-
-	pr_err("%s seen by %s %s at address %x\n",
-			omap3_l3_code_string(code),
-			omap3_l3_initiator_string(initid),
-			multi ? "Multiple Errors" : "", address);
-	WARN_ON(1);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
-{
-	struct omap3_l3 *l3 = _l3;
-	u64 status, clear;
-	u64 error;
-	u64 error_addr;
-	u64 err_source = 0;
-	void __iomem *base;
-	int int_type;
-	irqreturn_t ret = IRQ_NONE;
-
-	int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
-	if (!int_type) {
-		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
-		/*
-		 * if we have a timeout error, there's nothing we can
-		 * do besides rebooting the board. So let's BUG on any
-		 * of such errors and handle the others. timeout error
-		 * is severe and not expected to occur.
-		 */
-		BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
-	} else {
-		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
-		/* No timeout error for debug sources */
-	}
-
-	/* identify the error source */
-	err_source = __ffs(status);
-
-	base = l3->rt + omap3_l3_bases[int_type][err_source];
-	error = omap3_l3_readll(base, L3_ERROR_LOG);
-	if (error) {
-		error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-		ret |= omap3_l3_block_irq(l3, error, error_addr);
-	}
-
-	/* Clear the status register */
-	clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
-		L3_AGENT_STATUS_CLEAR_TA;
-	omap3_l3_writell(base, L3_AGENT_STATUS, clear);
-
-	/* clear the error log register */
-	omap3_l3_writell(base, L3_ERROR_LOG, error);
-
-	return ret;
-}
-
-static int __init omap3_l3_probe(struct platform_device *pdev)
-{
-	struct omap3_l3 *l3;
-	struct resource *res;
-	int ret;
-
-	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
-	if (!l3)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, l3);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource\n");
-		ret = -ENODEV;
-		goto err0;
-	}
-	l3->rt = ioremap(res->start, resource_size(res));
-	if (!l3->rt) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err0;
-	}
-
-	l3->debug_irq = platform_get_irq(pdev, 0);
-	ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING,
-		"l3-debug-irq", l3);
-	if (ret) {
-		dev_err(&pdev->dev, "couldn't request debug irq\n");
-		goto err1;
-	}
-
-	l3->app_irq = platform_get_irq(pdev, 1);
-	ret = request_irq(l3->app_irq, omap3_l3_app_irq,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING,
-		"l3-app-irq", l3);
-	if (ret) {
-		dev_err(&pdev->dev, "couldn't request app irq\n");
-		goto err2;
-	}
-
-	return 0;
-
-err2:
-	free_irq(l3->debug_irq, l3);
-err1:
-	iounmap(l3->rt);
-err0:
-	kfree(l3);
-	return ret;
-}
-
-static int __exit omap3_l3_remove(struct platform_device *pdev)
-{
-	struct omap3_l3         *l3 = platform_get_drvdata(pdev);
-
-	free_irq(l3->app_irq, l3);
-	free_irq(l3->debug_irq, l3);
-	iounmap(l3->rt);
-	kfree(l3);
-
-	return 0;
-}
-
-static struct platform_driver omap3_l3_driver = {
-	.remove         = __exit_p(omap3_l3_remove),
-	.driver         = {
-	.name   = "omap_l3_smx",
-	},
-};
-
-static int __init omap3_l3_init(void)
-{
-	return platform_driver_probe(&omap3_l3_driver, omap3_l3_probe);
-}
-postcore_initcall_sync(omap3_l3_init);
-
-static void __exit omap3_l3_exit(void)
-{
-	platform_driver_unregister(&omap3_l3_driver);
-}
-module_exit(omap3_l3_exit);
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
deleted file mode 100644
index 4f3cebca4179..000000000000
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- *	Felipe Balbi <balbi@ti.com>
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-
-/* Register definitions. All 64-bit wide */
-#define L3_COMPONENT			0x000
-#define L3_CORE				0x018
-#define L3_AGENT_CONTROL		0x020
-#define L3_AGENT_STATUS			0x028
-#define L3_ERROR_LOG			0x058
-
-#define L3_ERROR_LOG_MULTI		(1 << 31)
-#define L3_ERROR_LOG_SECONDARY		(1 << 30)
-
-#define L3_ERROR_LOG_ADDR		0x060
-
-/* Register definitions for Sideband Interconnect */
-#define L3_SI_CONTROL			0x020
-#define L3_SI_FLAG_STATUS_0		0x510
-
-static const u64 shift = 1;
-
-#define L3_STATUS_0_MPUIA_BRST		(shift << 0)
-#define L3_STATUS_0_MPUIA_RSP		(shift << 1)
-#define L3_STATUS_0_MPUIA_INBAND	(shift << 2)
-#define L3_STATUS_0_IVAIA_BRST		(shift << 6)
-#define L3_STATUS_0_IVAIA_RSP		(shift << 7)
-#define L3_STATUS_0_IVAIA_INBAND	(shift << 8)
-#define L3_STATUS_0_SGXIA_BRST		(shift << 9)
-#define L3_STATUS_0_SGXIA_RSP		(shift << 10)
-#define L3_STATUS_0_SGXIA_MERROR	(shift << 11)
-#define L3_STATUS_0_CAMIA_BRST		(shift << 12)
-#define L3_STATUS_0_CAMIA_RSP		(shift << 13)
-#define L3_STATUS_0_CAMIA_INBAND	(shift << 14)
-#define L3_STATUS_0_DISPIA_BRST		(shift << 15)
-#define L3_STATUS_0_DISPIA_RSP		(shift << 16)
-#define L3_STATUS_0_DMARDIA_BRST	(shift << 18)
-#define L3_STATUS_0_DMARDIA_RSP		(shift << 19)
-#define L3_STATUS_0_DMAWRIA_BRST	(shift << 21)
-#define L3_STATUS_0_DMAWRIA_RSP		(shift << 22)
-#define L3_STATUS_0_USBOTGIA_BRST	(shift << 24)
-#define L3_STATUS_0_USBOTGIA_RSP	(shift << 25)
-#define L3_STATUS_0_USBOTGIA_INBAND	(shift << 26)
-#define L3_STATUS_0_USBHOSTIA_BRST	(shift << 27)
-#define L3_STATUS_0_USBHOSTIA_INBAND	(shift << 28)
-#define L3_STATUS_0_SMSTA_REQ		(shift << 48)
-#define L3_STATUS_0_GPMCTA_REQ		(shift << 49)
-#define L3_STATUS_0_OCMRAMTA_REQ	(shift << 50)
-#define L3_STATUS_0_OCMROMTA_REQ	(shift << 51)
-#define L3_STATUS_0_IVATA_REQ		(shift << 54)
-#define L3_STATUS_0_SGXTA_REQ		(shift << 55)
-#define L3_STATUS_0_SGXTA_SERROR	(shift << 56)
-#define L3_STATUS_0_GPMCTA_SERROR	(shift << 57)
-#define L3_STATUS_0_L4CORETA_REQ	(shift << 58)
-#define L3_STATUS_0_L4PERTA_REQ		(shift << 59)
-#define L3_STATUS_0_L4EMUTA_REQ		(shift << 60)
-#define L3_STATUS_0_MAD2DTA_REQ		(shift << 61)
-
-#define L3_STATUS_0_TIMEOUT_MASK	(L3_STATUS_0_MPUIA_BRST		\
-					| L3_STATUS_0_MPUIA_RSP		\
-					| L3_STATUS_0_IVAIA_BRST	\
-					| L3_STATUS_0_IVAIA_RSP		\
-					| L3_STATUS_0_SGXIA_BRST	\
-					| L3_STATUS_0_SGXIA_RSP		\
-					| L3_STATUS_0_CAMIA_BRST	\
-					| L3_STATUS_0_CAMIA_RSP		\
-					| L3_STATUS_0_DISPIA_BRST	\
-					| L3_STATUS_0_DISPIA_RSP	\
-					| L3_STATUS_0_DMARDIA_BRST	\
-					| L3_STATUS_0_DMARDIA_RSP	\
-					| L3_STATUS_0_DMAWRIA_BRST	\
-					| L3_STATUS_0_DMAWRIA_RSP	\
-					| L3_STATUS_0_USBOTGIA_BRST	\
-					| L3_STATUS_0_USBOTGIA_RSP	\
-					| L3_STATUS_0_USBHOSTIA_BRST	\
-					| L3_STATUS_0_SMSTA_REQ		\
-					| L3_STATUS_0_GPMCTA_REQ	\
-					| L3_STATUS_0_OCMRAMTA_REQ	\
-					| L3_STATUS_0_OCMROMTA_REQ	\
-					| L3_STATUS_0_IVATA_REQ		\
-					| L3_STATUS_0_SGXTA_REQ		\
-					| L3_STATUS_0_L4CORETA_REQ	\
-					| L3_STATUS_0_L4PERTA_REQ	\
-					| L3_STATUS_0_L4EMUTA_REQ	\
-					| L3_STATUS_0_MAD2DTA_REQ)
-
-#define L3_SI_FLAG_STATUS_1		0x530
-
-#define L3_STATUS_1_MPU_DATAIA		(1 << 0)
-#define L3_STATUS_1_DAPIA0		(1 << 3)
-#define L3_STATUS_1_DAPIA1		(1 << 4)
-#define L3_STATUS_1_IVAIA		(1 << 6)
-
-#define L3_PM_ERROR_LOG			0x020
-#define L3_PM_CONTROL			0x028
-#define L3_PM_ERROR_CLEAR_SINGLE	0x030
-#define L3_PM_ERROR_CLEAR_MULTI		0x038
-#define L3_PM_REQ_INFO_PERMISSION(n)	(0x048 + (0x020 * n))
-#define L3_PM_READ_PERMISSION(n)	(0x050 + (0x020 * n))
-#define L3_PM_WRITE_PERMISSION(n)	(0x058 + (0x020 * n))
-#define L3_PM_ADDR_MATCH(n)		(0x060 + (0x020 * n))
-
-/* L3 error log bit fields. Common for IA and TA */
-#define L3_ERROR_LOG_CODE		24
-#define L3_ERROR_LOG_INITID		8
-#define L3_ERROR_LOG_CMD		0
-
-/* L3 agent status bit fields. */
-#define L3_AGENT_STATUS_CLEAR_IA	0x10000000
-#define L3_AGENT_STATUS_CLEAR_TA	0x01000000
-
-#define OMAP34xx_IRQ_L3_APP		10
-#define L3_APPLICATION_ERROR		0x0
-#define L3_DEBUG_ERROR			0x1
-
-enum omap3_l3_initiator_id {
-	/* LCD has 1 ID */
-	OMAP_L3_LCD = 29,
-	/* SAD2D has 1 ID */
-	OMAP_L3_SAD2D = 28,
-	/* MPU has 5 IDs */
-	OMAP_L3_IA_MPU_SS_1 = 27,
-	OMAP_L3_IA_MPU_SS_2 = 26,
-	OMAP_L3_IA_MPU_SS_3 = 25,
-	OMAP_L3_IA_MPU_SS_4 = 24,
-	OMAP_L3_IA_MPU_SS_5 = 23,
-	/* IVA2.2 SS has 3 IDs*/
-	OMAP_L3_IA_IVA_SS_1 = 22,
-	OMAP_L3_IA_IVA_SS_2 = 21,
-	OMAP_L3_IA_IVA_SS_3 = 20,
-	/* IVA 2.2 SS DMA has 6 IDS */
-	OMAP_L3_IA_IVA_SS_DMA_1 = 19,
-	OMAP_L3_IA_IVA_SS_DMA_2 = 18,
-	OMAP_L3_IA_IVA_SS_DMA_3 = 17,
-	OMAP_L3_IA_IVA_SS_DMA_4 = 16,
-	OMAP_L3_IA_IVA_SS_DMA_5 = 15,
-	OMAP_L3_IA_IVA_SS_DMA_6 = 14,
-	/* SGX has 1 ID */
-	OMAP_L3_IA_SGX = 13,
-	/* CAM has 3 ID */
-	OMAP_L3_IA_CAM_1 = 12,
-	OMAP_L3_IA_CAM_2 = 11,
-	OMAP_L3_IA_CAM_3 = 10,
-	/* DAP has 1 ID */
-	OMAP_L3_IA_DAP = 9,
-	/* SDMA WR has 2 IDs */
-	OMAP_L3_SDMA_WR_1 = 8,
-	OMAP_L3_SDMA_WR_2 = 7,
-	/* SDMA RD has 4 IDs */
-	OMAP_L3_SDMA_RD_1 = 6,
-	OMAP_L3_SDMA_RD_2 = 5,
-	OMAP_L3_SDMA_RD_3 = 4,
-	OMAP_L3_SDMA_RD_4 = 3,
-	/* HSUSB OTG has 1 ID */
-	OMAP_L3_USBOTG = 2,
-	/* HSUSB HOST has 1 ID */
-	OMAP_L3_USBHOST = 1,
-};
-
-enum omap3_l3_code {
-	OMAP_L3_CODE_NOERROR = 0,
-	OMAP_L3_CODE_UNSUP_CMD = 1,
-	OMAP_L3_CODE_ADDR_HOLE = 2,
-	OMAP_L3_CODE_PROTECT_VIOLATION = 3,
-	OMAP_L3_CODE_IN_BAND_ERR = 4,
-	/* codes 5 and 6 are reserved */
-	OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT = 7,
-	OMAP_L3_CODE_REQ_TOUT_NO_RESP = 8,
-	/* codes 9 - 15 are also reserved */
-};
-
-struct omap3_l3 {
-	struct device *dev;
-	struct clk *ick;
-
-	/* memory base*/
-	void __iomem *rt;
-
-	int debug_irq;
-	int app_irq;
-
-	/* true when and inband functional error occurs */
-	unsigned inband:1;
-};
-
-/* offsets for l3 agents in order with the Flag status register */
-static unsigned int omap3_l3_app_bases[] = {
-	/* MPU IA */
-	0x1400,
-	0x1400,
-	0x1400,
-	/* RESERVED */
-	0,
-	0,
-	0,
-	/* IVA 2.2 IA */
-	0x1800,
-	0x1800,
-	0x1800,
-	/* SGX IA */
-	0x1c00,
-	0x1c00,
-	/* RESERVED */
-	0,
-	/* CAMERA IA */
-	0x5800,
-	0x5800,
-	0x5800,
-	/* DISPLAY IA */
-	0x5400,
-	0x5400,
-	/* RESERVED */
-	0,
-	/*SDMA RD IA */
-	0x4c00,
-	0x4c00,
-	/* RESERVED */
-	0,
-	/* SDMA WR IA */
-	0x5000,
-	0x5000,
-	/* RESERVED */
-	0,
-	/* USB OTG IA */
-	0x4400,
-	0x4400,
-	0x4400,
-	/* USB HOST IA */
-	0x4000,
-	0x4000,
-	/* RESERVED */
-	0,
-	0,
-	0,
-	0,
-	/* SAD2D IA */
-	0x3000,
-	0x3000,
-	0x3000,
-	/* RESERVED */
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	/* SMA TA */
-	0x2000,
-	/* GPMC TA */
-	0x2400,
-	/* OCM RAM TA */
-	0x2800,
-	/* OCM ROM TA */
-	0x2C00,
-	/* L4 CORE TA */
-	0x6800,
-	/* L4 PER TA */
-	0x6c00,
-	/* IVA 2.2 TA */
-	0x6000,
-	/* SGX TA */
-	0x6400,
-	/* L4 EMU TA */
-	0x7000,
-	/* GPMC TA */
-	0x2400,
-	/* L4 CORE TA */
-	0x6800,
-	/* L4 PER TA */
-	0x6c00,
-	/* L4 EMU TA */
-	0x7000,
-	/* MAD2D TA */
-	0x3400,
-	/* RESERVED */
-	0,
-	0,
-};
-
-static unsigned int omap3_l3_debug_bases[] = {
-	/* MPU DATA IA */
-	0x1400,
-	/* RESERVED */
-	0,
-	0,
-	/* DAP IA */
-	0x5c00,
-	0x5c00,
-	/* RESERVED */
-	0,
-	/* IVA 2.2 IA */
-	0x1800,
-	/* REST RESERVED */
-};
-
-static u32 *omap3_l3_bases[] = {
-	omap3_l3_app_bases,
-	omap3_l3_debug_bases,
-};
-
-/*
- * REVISIT define __raw_readll/__raw_writell here, but move them to
- * <asm/io.h> at some point
- */
-#define __raw_writell(v, a)	(__chk_io_ptr(a), \
-				*(volatile u64 __force *)(a) = (v))
-#define __raw_readll(a)		(__chk_io_ptr(a), \
-				*(volatile u64 __force *)(a))
-
-#endif
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d52651a05daa..d992db8ff0b0 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -29,145 +29,9 @@
 #include <linux/usb.h>
 
 #include <plat/usb.h>
-#include "control.h"
-
-/* OMAP control module register for UTMI PHY */
-#define CONTROL_DEV_CONF		0x300
-#define PHY_PD				0x1
-
-#define USBOTGHS_CONTROL		0x33c
-#define	AVALID				BIT(0)
-#define	BVALID				BIT(1)
-#define	VBUSVALID			BIT(2)
-#define	SESSEND				BIT(3)
-#define	IDDIG				BIT(4)
-
-static struct clk *phyclk, *clk48m, *clk32k;
-static void __iomem *ctrl_base;
-static int usbotghs_control;
-
-int omap4430_phy_init(struct device *dev)
-{
-	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
-	if (!ctrl_base) {
-		pr_err("control module ioremap failed\n");
-		return -ENOMEM;
-	}
-	/* Power down the phy */
-	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-
-	if (!dev) {
-		iounmap(ctrl_base);
-		return 0;
-	}
-
-	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
-	if (IS_ERR(phyclk)) {
-		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
-		iounmap(ctrl_base);
-		return PTR_ERR(phyclk);
-	}
-
-	clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
-	if (IS_ERR(clk48m)) {
-		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
-		clk_put(phyclk);
-		iounmap(ctrl_base);
-		return PTR_ERR(clk48m);
-	}
-
-	clk32k = clk_get(dev, "usb_phy_cm_clk32k");
-	if (IS_ERR(clk32k)) {
-		dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
-		clk_put(phyclk);
-		clk_put(clk48m);
-		iounmap(ctrl_base);
-		return PTR_ERR(clk32k);
-	}
-	return 0;
-}
-
-int omap4430_phy_set_clk(struct device *dev, int on)
-{
-	static int state;
-
-	if (on && !state) {
-		/* Enable the phy clocks */
-		clk_enable(phyclk);
-		clk_enable(clk48m);
-		clk_enable(clk32k);
-		state = 1;
-	} else if (state) {
-		/* Disable the phy clocks */
-		clk_disable(phyclk);
-		clk_disable(clk48m);
-		clk_disable(clk32k);
-		state = 0;
-	}
-	return 0;
-}
-
-int omap4430_phy_power(struct device *dev, int ID, int on)
-{
-	if (on) {
-		if (ID)
-			/* enable VBUS valid, IDDIG groung */
-			__raw_writel(AVALID | VBUSVALID, ctrl_base +
-							USBOTGHS_CONTROL);
-		else
-			/*
-			 * Enable VBUS Valid, AValid and IDDIG
-			 * high impedance
-			 */
-			__raw_writel(IDDIG | AVALID | VBUSVALID,
-						ctrl_base + USBOTGHS_CONTROL);
-	} else {
-		/* Enable session END and IDIG to high impedance. */
-		__raw_writel(SESSEND | IDDIG, ctrl_base +
-					USBOTGHS_CONTROL);
-	}
-	return 0;
-}
-
-int omap4430_phy_suspend(struct device *dev, int suspend)
-{
-	if (suspend) {
-		/* Disable the clocks */
-		omap4430_phy_set_clk(dev, 0);
-		/* Power down the phy */
-		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-
-		/* save the context */
-		usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
-	} else {
-		/* Enable the internel phy clcoks */
-		omap4430_phy_set_clk(dev, 1);
-		/* power on the phy */
-		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
-			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-			mdelay(200);
-		}
-
-		/* restore the context */
-		__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
-	}
-
-	return 0;
-}
-
-int omap4430_phy_exit(struct device *dev)
-{
-	if (ctrl_base)
-		iounmap(ctrl_base);
-	if (phyclk)
-		clk_put(phyclk);
-	if (clk48m)
-		clk_put(clk48m);
-	if (clk32k)
-		clk_put(clk32k);
 
-	return 0;
-}
+#include "soc.h"
+#include "control.h"
 
 void am35x_musb_reset(void)
 {
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index d8f6dbf45d16..45ad7f74f356 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -64,25 +64,22 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 		}
 		oh = omap_hwmod_lookup(opp_def->hwmod_name);
 		if (!oh || !oh->od) {
-			pr_debug("%s: no hwmod or odev for %s, [%d] "
-				"cannot add OPPs.\n", __func__,
-				opp_def->hwmod_name, i);
+			pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n",
+				 __func__, opp_def->hwmod_name, i);
 			continue;
 		}
 		dev = &oh->od->pdev->dev;
 
 		r = opp_add(dev, opp_def->freq, opp_def->u_volt);
 		if (r) {
-			dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
-				"result=%d\n",
-			       __func__, opp_def->freq,
-			       opp_def->hwmod_name, i, r);
+			dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
+				__func__, opp_def->freq,
+				opp_def->hwmod_name, i, r);
 		} else {
 			if (!opp_def->default_available)
 				r = opp_disable(dev, opp_def->freq);
 			if (r)
-				dev_err(dev, "%s: disable %ld failed for %s "
-					"[%d] result=%d\n",
+				dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
 					__func__, opp_def->freq,
 					opp_def->hwmod_name, i, r);
 		}
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 5037e76e4e23..a9e8cf21705d 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -28,7 +28,7 @@
  *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
  */
 
-#include <plat/hardware.h>
+#include <linux/kernel.h>
 
 #include "opp2xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 750805c528d8..0e75ec3e114b 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -26,7 +26,7 @@
  * This is technically part of the OMAP2xxx clock code.
  */
 
-#include <plat/hardware.h>
+#include <linux/kernel.h>
 
 #include "opp2xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index d95f3f945d4a..75cef5f67a8a 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,8 +19,6 @@
  */
 #include <linux/module.h>
 
-#include <plat/cpu.h>
-
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba27101b..a9fd6d5fe79e 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -20,8 +20,7 @@
  */
 #include <linux/module.h>
 
-#include <plat/cpu.h>
-
+#include "soc.h"
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
@@ -94,7 +93,7 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap443x())
 		return r;
 
 	r = omap_init_opp_table(omap44xx_opp_def_list,
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 814bcd901596..3e1345fc0713 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -28,7 +28,6 @@
 #include <linux/slab.h>
 
 #include <plat/clock.h>
-#include <plat/board.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 9cb5cede0f50..abefbc4d8e0b 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -80,7 +80,8 @@ static void __init omap2_init_processor_devices(void)
 
 int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+	if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
+	    !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING))
 		clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
 		 atomic_read(&clkdm->usecount) == 0)
@@ -188,7 +189,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 		goto exit;
 	}
 
-	freq = clk->rate;
+	freq = clk_get_rate(clk);
 	clk_put(clk);
 
 	rcu_read_lock();
@@ -203,8 +204,8 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	bootup_volt = opp_get_voltage(opp);
 	rcu_read_unlock();
 	if (!bootup_volt) {
-		pr_err("%s: unable to find voltage corresponding "
-			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+		pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
+		       __func__, vdd_name);
 		goto exit;
 	}
 
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 2edeffc923a6..8af6cd6ac331 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -29,6 +29,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -38,9 +39,6 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/dma.h>
-#include <plat/board.h>
-
-#include <mach/irqs.h>
 
 #include "common.h"
 #include "prm2xxx_3xxx.h"
@@ -352,16 +350,6 @@ int __init omap2_pm_init(void)
 
 	prcm_setup_regs();
 
-	/* Hack to prevent MPU retention when STI console is enabled. */
-	{
-		const struct omap_sti_console_config *sti;
-
-		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
-				      struct omap_sti_console_config);
-		if (sti != NULL && sti->enable)
-			sti_console_enabled = 1;
-	}
-
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
 	 * These routines need to be in SRAM as that's the only
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e4fc88c65dbd..ba670db1fd37 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,6 +28,8 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <trace/events/power.h>
 
 #include <asm/suspend.h>
@@ -272,21 +274,16 @@ void omap_sram_idle(void)
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(mpu_pwrdm);
-		pwrdm_pre_transition(neon_pwrdm);
-	}
+	pwrdm_pre_transition(NULL);
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -339,20 +336,14 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition(NULL);
+
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-		pwrdm_post_transition(per_pwrdm);
-	}
-
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_post_transition(mpu_pwrdm);
-		pwrdm_post_transition(neon_pwrdm);
-	}
 }
 
 static void omap3_pm_idle(void)
@@ -400,9 +391,8 @@ restore:
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
-			pr_info("Powerdomain (%s) didn't enter "
-				"target state %d\n",
-			       pwrst->pwrdm->name, pwrst->next_state);
+			pr_info("Powerdomain (%s) didn't enter target state %d\n",
+				pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -742,8 +732,7 @@ int __init omap3_pm_init(void)
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);
 		if (!omap3_secure_ram_storage)
-			pr_err("Memory allocation failed when "
-			       "allocating for secure sram context\n");
+			pr_err("Memory allocation failed when allocating for secure sram context\n");
 
 		local_irq_disable();
 		local_fiq_disable();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index ea24174f5707..04922d149068 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -69,9 +69,8 @@ static int omap4_pm_suspend(void)
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
-			pr_info("Powerdomain (%s) didn't enter "
-			       "target state %d\n",
-			       pwrst->pwrdm->name, pwrst->next_state);
+			pr_info("Powerdomain (%s) didn't enter target state %d\n",
+				pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -189,8 +188,7 @@ int __init omap4_pm_init(void)
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
 	if (ret) {
-		pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
-				"wakeup dependency\n");
+		pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
 		goto err2;
 	}
 
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
new file mode 100644
index 000000000000..2a791766283d
--- /dev/null
+++ b/arch/arm/mach-omap2/pmu.c
@@ -0,0 +1,95 @@
+/*
+ * OMAP2 ARM Performance Monitoring Unit (PMU) Support
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Contacts:
+ * Jon Hunter <jon-hunter@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/pm_runtime.h>
+
+#include <asm/pmu.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+
+static char *omap2_pmu_oh_names[] = {"mpu"};
+static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
+static char *omap4430_pmu_oh_names[] = {"l3_main_3", "l3_instr", "debugss"};
+static struct platform_device *omap_pmu_dev;
+
+/**
+ * omap2_init_pmu - creates and registers PMU platform device
+ * @oh_num:	Number of OMAP HWMODs required to create PMU device
+ * @oh_names:	Array of OMAP HWMODS names required to create PMU device
+ *
+ * Uses OMAP HWMOD framework to create and register an ARM PMU device
+ * from a list of HWMOD names passed. Currently supports OMAP2, OMAP3
+ * and OMAP4 devices.
+ */
+static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[])
+{
+	int i;
+	struct omap_hwmod *oh[3];
+	char *dev_name = "arm-pmu";
+
+	if ((!oh_num) || (oh_num > 3))
+		return -EINVAL;
+
+	for (i = 0; i < oh_num; i++) {
+		oh[i] = omap_hwmod_lookup(oh_names[i]);
+		if (!oh[i]) {
+			pr_err("Could not look up %s hwmod\n", oh_names[i]);
+			return -ENODEV;
+		}
+	}
+
+	omap_pmu_dev = omap_device_build_ss(dev_name, -1, oh, oh_num, NULL, 0,
+					    NULL, 0, 0);
+	WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
+	     dev_name);
+
+	if (IS_ERR(omap_pmu_dev))
+		return PTR_ERR(omap_pmu_dev);
+
+	pm_runtime_enable(&omap_pmu_dev->dev);
+
+	return 0;
+}
+
+static int __init omap_init_pmu(void)
+{
+	unsigned oh_num;
+	char **oh_names;
+
+	/*
+	 * To create an ARM-PMU device the following HWMODs
+	 * are required for the various OMAP2+ devices.
+	 *
+	 * OMAP24xx:	mpu
+	 * OMAP3xxx:	mpu, debugss
+	 * OMAP4430:	l3_main_3, l3_instr, debugss
+	 * OMAP4460/70:	mpu, debugss
+	 */
+	if (cpu_is_omap443x()) {
+		oh_num = ARRAY_SIZE(omap4430_pmu_oh_names);
+		oh_names = omap4430_pmu_oh_names;
+		/* XXX Remove the next two lines when CTI driver available */
+		pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
+		return 0;
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		oh_num = ARRAY_SIZE(omap3_pmu_oh_names);
+		oh_names = omap3_pmu_oh_names;
+	} else {
+		oh_num = ARRAY_SIZE(omap2_pmu_oh_names);
+		oh_names = omap2_pmu_oh_names;
+	}
+
+	return omap2_init_pmu(oh_num, oh_names);
+}
+subsys_initcall(omap_init_pmu);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 69b36e185e9b..1678a3284233 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -28,11 +28,13 @@
 #include "prm44xx.h"
 
 #include <asm/cpu.h>
-#include <plat/cpu.h>
+
+#include <plat/prcm.h>
+
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include <plat/prcm.h>
 
+#include "soc.h"
 #include "pm.h"
 
 #define PWRDM_TRACE_STATES_FLAG	(1<<31)
@@ -339,8 +341,8 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	if (!pwrdm || !clkdm)
 		return -EINVAL;
 
-	pr_debug("powerdomain: associating clockdomain %s with powerdomain "
-		 "%s\n", clkdm->name, pwrdm->name);
+	pr_debug("powerdomain: %s: associating clockdomain %s\n",
+		 pwrdm->name, clkdm->name);
 
 	for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
 		if (!pwrdm->pwrdm_clkdms[i])
@@ -354,8 +356,8 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	}
 
 	if (i == PWRDM_MAX_CLKDMS) {
-		pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
-			 "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
+		pr_debug("powerdomain: %s: increase PWRDM_MAX_CLKDMS for clkdm %s\n",
+			 pwrdm->name, clkdm->name);
 		WARN_ON(1);
 		ret = -ENOMEM;
 		goto pac_exit;
@@ -387,16 +389,16 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	if (!pwrdm || !clkdm)
 		return -EINVAL;
 
-	pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
-		 "%s\n", clkdm->name, pwrdm->name);
+	pr_debug("powerdomain: %s: dissociating clockdomain %s\n",
+		 pwrdm->name, clkdm->name);
 
 	for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
 		if (pwrdm->pwrdm_clkdms[i] == clkdm)
 			break;
 
 	if (i == PWRDM_MAX_CLKDMS) {
-		pr_debug("powerdomain: clkdm %s not associated with pwrdm "
-			 "%s ?!\n", clkdm->name, pwrdm->name);
+		pr_debug("powerdomain: %s: clkdm %s not associated?!\n",
+			 pwrdm->name, clkdm->name);
 		ret = -ENOENT;
 		goto pdc_exit;
 	}
@@ -485,7 +487,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 	if (!(pwrdm->pwrsts & (1 << pwrst)))
 		return -EINVAL;
 
-	pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
+	pr_debug("powerdomain: %s: setting next powerstate to %0x\n",
 		 pwrdm->name, pwrst);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
@@ -587,7 +589,7 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 	if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
 		return -EINVAL;
 
-	pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
+	pr_debug("powerdomain: %s: setting next logic powerstate to %0x\n",
 		 pwrdm->name, pwrst);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst)
@@ -624,8 +626,8 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
 		return -EINVAL;
 
-	pr_debug("powerdomain: setting next memory powerstate for domain %s "
-		 "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
+	pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-ON to %0x\n",
+		 pwrdm->name, bank, pwrst);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst)
 		ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst);
@@ -662,8 +664,8 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
 		return -EINVAL;
 
-	pr_debug("powerdomain: setting next memory powerstate for domain %s "
-		 "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
+	pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-RET to %0x\n",
+		 pwrdm->name, bank, pwrst);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst)
 		ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst);
@@ -841,7 +843,7 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
 	 * warn & fail if it is not ON.
 	 */
 
-	pr_debug("powerdomain: clearing previous power state reg for %s\n",
+	pr_debug("powerdomain: %s: clearing previous power state reg\n",
 		 pwrdm->name);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst)
@@ -871,8 +873,7 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
 	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
 		return ret;
 
-	pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
-		 pwrdm->name);
+	pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", pwrdm->name);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar)
 		ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm);
@@ -901,8 +902,7 @@ int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
 		return ret;
 
-	pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
-		 pwrdm->name);
+	pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", pwrdm->name);
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar)
 		ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index 0f0a9f1592fe..3950ccfe5f4a 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -122,8 +122,8 @@ static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
 			udelay(1);
 
 	if (c > PWRDM_TRANSITION_BAILOUT) {
-		printk(KERN_ERR "powerdomain: waited too long for "
-			"powerdomain %s to complete transition\n", pwrdm->name);
+		pr_err("powerdomain: %s: waited too long to complete transition\n",
+		       pwrdm->name);
 		return -EAGAIN;
 	}
 
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
index 601325b852a4..aceb4f464c9b 100644
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP4 powerdomain control
  *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
  * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
@@ -151,6 +151,34 @@ static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
 	return v;
 }
 
+/**
+ * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
+ * @pwrdm: struct powerdomain * to read the state for
+ *
+ * Reads the previous logic powerstate for a powerdomain. This
+ * function must determine the previous logic powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next retention logic state to
+ * see the actual value.  In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether the logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+	int state;
+
+	state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+	if (state == PWRDM_POWER_OFF)
+		return PWRDM_POWER_OFF;
+
+	if (state != PWRDM_POWER_RET)
+		return PWRDM_POWER_RET;
+
+	return omap4_pwrdm_read_logic_retst(pwrdm);
+}
+
 static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 {
 	u32 m, v;
@@ -179,6 +207,35 @@ static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
 	return v;
 }
 
+/**
+ * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
+ * @pwrdm: struct powerdomain * to read mem powerstate for
+ * @bank: memory bank index
+ *
+ * Reads the previous memory powerstate for a powerdomain. This
+ * function must determine the previous memory powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next memory retention state to
+ * see the actual value.  In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	int state;
+
+	state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+	if (state == PWRDM_POWER_OFF)
+		return PWRDM_POWER_OFF;
+
+	if (state != PWRDM_POWER_RET)
+		return PWRDM_POWER_RET;
+
+	return omap4_pwrdm_read_mem_retst(pwrdm, bank);
+}
+
 static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 {
 	u32 c = 0;
@@ -198,8 +255,8 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 		udelay(1);
 
 	if (c > PWRDM_TRANSITION_BAILOUT) {
-		printk(KERN_ERR "powerdomain: waited too long for "
-		       "powerdomain %s to complete transition\n", pwrdm->name);
+		pr_err("powerdomain: %s: waited too long to complete transition\n",
+		       pwrdm->name);
 		return -EAGAIN;
 	}
 
@@ -217,9 +274,11 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_clear_all_prev_pwrst	= omap4_pwrdm_clear_all_prev_pwrst,
 	.pwrdm_set_logic_retst	= omap4_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst	= omap4_pwrdm_read_logic_pwrst,
+	.pwrdm_read_prev_logic_pwrst	= omap4_pwrdm_read_prev_logic_pwrst,
 	.pwrdm_read_logic_retst	= omap4_pwrdm_read_logic_retst,
 	.pwrdm_read_mem_pwrst	= omap4_pwrdm_read_mem_pwrst,
 	.pwrdm_read_mem_retst	= omap4_pwrdm_read_mem_retst,
+	.pwrdm_read_prev_mem_pwrst	= omap4_pwrdm_read_prev_mem_pwrst,
 	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
 	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index bb883e463078..8b23d234fb55 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -15,11 +15,9 @@
 #include <linux/init.h>
 #include <linux/bug.h>
 
-#include <plat/cpu.h>
-
+#include "soc.h"
 #include "powerdomain.h"
 #include "powerdomains2xxx_3xxx_data.h"
-
 #include "prcm-common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index e5f0503a68b0..72df97482cc0 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -109,6 +109,8 @@
 #define OMAP2430_EN_MDM_INTC_MASK			(1 << 11)
 #define OMAP2430_EN_USBHS_SHIFT				6
 #define OMAP2430_EN_USBHS_MASK				(1 << 6)
+#define OMAP24XX_EN_GPMC_SHIFT				1
+#define OMAP24XX_EN_GPMC_MASK				(1 << 1)
 
 /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
 #define OMAP2420_ST_MMC_SHIFT				26
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 053e24ed3c48..0f51e034e0aa 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
@@ -140,11 +139,11 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
-		pr_debug("cm: Module associated with clock %s ready after %d "
-			 "loops\n", name, i);
+		pr_debug("cm: Module associated with clock %s ready after %d loops\n",
+			 name, i);
 	else
-		pr_err("cm: Module associated with clock %s didn't enable in "
-		       "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+		pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
+		       name, MAX_MODULE_ENABLE_WAIT);
 
 	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
 };
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index a0309dea6794..9529984d8d2b 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -17,11 +17,10 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include "common.h"
-#include <plat/cpu.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 
+#include "soc.h"
+#include "common.h"
 #include "vp.h"
 
 #include "prm2xxx_3xxx.h"
@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
 	.nr_regs		= 1,
 	.irqs			= omap3_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap3_prcm_irqs),
-	.irq			= INT_34XX_PRCM_MPU_IRQ,
+	.irq			= 11 + OMAP_INTC_START,
 	.read_pending_irqs	= &omap3xxx_prm_read_pending_irqs,
 	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index bb727c2d9337..f0c4d5f4a174 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,10 +17,9 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/cpu.h>
-#include <plat/irqs.h>
 #include <plat/prcm.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "vp.h"
@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.nr_regs		= 2,
 	.irqs			= omap4_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
-	.irq			= OMAP44XX_IRQ_PRCM,
+	.irq			= 11 + OMAP44XX_IRQ_GIC_START,
 	.read_pending_irqs	= &omap44xx_prm_read_pending_irqs,
 	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 03b126d9ad94..6b4d332be2f6 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -26,7 +26,6 @@
 
 #include <plat/common.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 1133bb2f632b..73e55e485329 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,11 +24,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/hardware.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c1b93c752d70..0405c8190803 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -29,11 +29,11 @@
 
 #include <plat/omap-serial.h>
 #include "common.h"
-#include <plat/board.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/serial.h>
 
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
 };
 
 #ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 
 	if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
  * in Smartidle Mode When Configured for DMA Operations.
  * WA: configure uart in force idle mode.
  */
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 
 	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
 }
 
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 	u8 idlemode;
 
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
 }
 
 #else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
@@ -229,9 +232,8 @@ static int __init omap_serial_early_init(void)
 
 			if (console_loglevel >= 10) {
 				uart_debug = true;
-				pr_info("%s used as console in debug mode"
-						" uart%d clocks will not be"
-						" gated", uart_name, uart->num);
+				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
+					uart_name, uart->num);
 			}
 
 			if (cmdline_find_option("no_console_suspend"))
@@ -304,6 +306,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 	omap_up.dma_rx_timeout = info->dma_rx_timeout;
 	omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
 	omap_up.autosuspend_timeout = info->autosuspend_timeout;
+	omap_up.DTR_gpio = info->DTR_gpio;
+	omap_up.DTR_inverted = info->DTR_inverted;
+	omap_up.DTR_present = info->DTR_present;
 
 	pdata = &omap_up;
 	pdata_size = sizeof(struct omap_uart_port_info);
@@ -313,8 +318,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 
 	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
 				 NULL, 0, false);
-	WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
-	     name, oh->name);
+	if (IS_ERR(pdev)) {
+		WARN(1, "Could not build omap_device for %s: %s.\n", name,
+		     oh->name);
+		return;
+	}
 
 	if ((console_uart_id == bdata->id) && no_console_suspend)
 		omap_device_disable_idle_on_suspend(pdev);
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index d4bf904d84ab..ce0ccd26efbd 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,8 +28,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-#include <plat/omap24xx.h>
-
+#include "omap24xx.h"
 #include "sdrc.h"
 
 /* First address of reserved address space?  apparently valid for OMAP2 & 3 */
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 1f62f23673fb..506987979c1c 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,9 +26,9 @@
 
 #include <asm/assembler.h>
 
-#include <plat/hardware.h>
 #include <plat/sram.h>
 
+#include "omap34xx.h"
 #include "iomap.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9f6b83d1b193..88ff83a0942e 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -14,10 +14,10 @@
 #include <asm/memory.h>
 #include <asm/hardware/cache-l2x0.h>
 
-#include <plat/omap44xx.h>
-#include <mach/omap-secure.h>
+#include "omap-secure.h"
 
 #include "common.h"
+#include "omap44xx.h"
 #include "omap4-sar-layout.h"
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
+	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
 	isb
 	dsb
-	ldmfd	sp!, {pc}
+	ldmfd	sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
new file mode 100644
index 000000000000..fc9b96daf851
--- /dev/null
+++ b/arch/arm/mach-omap2/soc.h
@@ -0,0 +1,7 @@
+#include <plat/cpu.h>
+#include "omap24xx.h"
+#include "omap34xx.h"
+#include "omap44xx.h"
+#include "ti81xx.h"
+#include "am33xx.h"
+#include "omap54xx.h"
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index d033a65f4e4e..cbeae56b56a9 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -104,16 +104,15 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
 	if (!sr_data) {
-		pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
-			__func__, oh->name);
+		pr_err("%s: Unable to allocate memory for %s sr_data\n",
+		       __func__, oh->name);
 		return -ENOMEM;
 	}
 
 	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
 	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-		pr_err("%s: No voltage domain specified for %s."
-				"Cannot initialize\n", __func__,
-					oh->name);
+		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+		       __func__, oh->name);
 		goto exit;
 	}
 
@@ -131,8 +130,8 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
 	if (!volt_data) {
-		pr_warning("%s: No Voltage table registered fo VDD%d."
-			"Something really wrong\n\n", __func__, i + 1);
+		pr_err("%s: No Voltage table registered for VDD%d\n",
+		       __func__, i + 1);
 		goto exit;
 	}
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index ee0bfcc1410f..8f7326cd435b 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -32,8 +32,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index d4d39ef04769..b140d6578529 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -32,8 +32,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index df5a21322b0a..2d0ceaa23fb8 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -29,8 +29,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "sdrc.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index 8f9843f78422..8f9843f78422 100644
--- a/arch/arm/plat-omap/include/plat/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 2ff6d41ec6c6..8847d6eb2313 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -36,16 +36,20 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #include <asm/mach/time.h>
-#include <plat/dmtimer.h>
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
-#include "common.h"
+
+#include <asm/arch_timer.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
 
+#include "soc.h"
+#include "common.h"
 #include "powerdomain.h"
 
 /* Parent clocks, eventually these will come from the clock framework */
@@ -69,6 +73,11 @@
 #define OMAP3_SECURE_TIMER	1
 #endif
 
+#define REALTIME_COUNTER_BASE				0x48243200
+#define INCREMENTER_NUMERATOR_OFFSET			0x10
+#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET		0x14
+#define NUMERATOR_DENUMERATOR_MASK			0xfffff000
+
 /* Clockevent code */
 
 static struct omap_dm_timer clkev;
@@ -211,7 +220,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = (void *)&clkev;
+	omap2_gp_timer_irq.dev_id = &clkev;
 	setup_irq(clkev.irq, &omap2_gp_timer_irq);
 
 	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
@@ -260,6 +269,7 @@ static u32 notrace dmtimer_read_sched_clock(void)
 	return 0;
 }
 
+#ifdef CONFIG_OMAP_32K_TIMER
 /* Setup free-running counter for clocksource */
 static int __init omap2_sync32k_clocksource_init(void)
 {
@@ -299,6 +309,12 @@ static int __init omap2_sync32k_clocksource_init(void)
 
 	return ret;
 }
+#else
+static inline int omap2_sync32k_clocksource_init(void)
+{
+	return -ENODEV;
+}
+#endif
 
 static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 						const char *fck_source)
@@ -339,6 +355,84 @@ static void __init omap2_clocksource_init(int gptimer_id,
 		omap2_gptimer_clocksource_init(gptimer_id, fck_source);
 }
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+/*
+ * The realtime counter also called master counter, is a free-running
+ * counter, which is related to real time. It produces the count used
+ * by the CPU local timer peripherals in the MPU cluster. The timer counts
+ * at a rate of 6.144 MHz. Because the device operates on different clocks
+ * in different power modes, the master counter shifts operation between
+ * clocks, adjusting the increment per clock in hardware accordingly to
+ * maintain a constant count rate.
+ */
+static void __init realtime_counter_init(void)
+{
+	void __iomem *base;
+	static struct clk *sys_clk;
+	unsigned long rate;
+	unsigned int reg, num, den;
+
+	base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
+	if (!base) {
+		pr_err("%s: ioremap failed\n", __func__);
+		return;
+	}
+	sys_clk = clk_get(NULL, "sys_clkin_ck");
+	if (!sys_clk) {
+		pr_err("%s: failed to get system clock handle\n", __func__);
+		iounmap(base);
+		return;
+	}
+
+	rate = clk_get_rate(sys_clk);
+	/* Numerator/denumerator values refer TRM Realtime Counter section */
+	switch (rate) {
+	case 1200000:
+		num = 64;
+		den = 125;
+		break;
+	case 1300000:
+		num = 768;
+		den = 1625;
+		break;
+	case 19200000:
+		num = 8;
+		den = 25;
+		break;
+	case 2600000:
+		num = 384;
+		den = 1625;
+		break;
+	case 2700000:
+		num = 256;
+		den = 1125;
+		break;
+	case 38400000:
+	default:
+		/* Program it for 38.4 MHz */
+		num = 4;
+		den = 25;
+		break;
+	}
+
+	/* Program numerator and denumerator registers */
+	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+			NUMERATOR_DENUMERATOR_MASK;
+	reg |= num;
+	__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
+
+	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+			NUMERATOR_DENUMERATOR_MASK;
+	reg |= den;
+	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
+
+	iounmap(base);
+}
+#else
+static inline void __init realtime_counter_init(void)
+{}
+#endif
+
 #define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src,			\
 				clksrc_nr, clksrc_src)			\
 static void __init omap##name##_timer_init(void)			\
@@ -373,8 +467,7 @@ OMAP_SYS_TIMER(3_am33xx)
 #ifdef CONFIG_ARCH_OMAP4
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      OMAP44XX_LOCAL_TWD_BASE,
-			      OMAP44XX_IRQ_LOCALTIMER);
+			      OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
 #endif
 
 static void __init omap4_timer_init(void)
@@ -386,6 +479,11 @@ static void __init omap4_timer_init(void)
 	if (omap_rev() != OMAP4430_REV_ES1_0) {
 		int err;
 
+		if (of_have_populated_dt()) {
+			twd_local_timer_of_register();
+			return;
+		}
+
 		err = twd_local_timer_register(&twd_local_timer);
 		if (err)
 			pr_err("twd_local_timer_register failed %d\n", err);
@@ -396,7 +494,18 @@ OMAP_SYS_TIMER(4)
 #endif
 
 #ifdef CONFIG_SOC_OMAP5
-OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE)
+static void __init omap5_timer_init(void)
+{
+	int err;
+
+	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
+	omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
+	realtime_counter_init();
+
+	err = arch_timer_of_register();
+	if (err)
+		pr_err("%s: arch_timer_register failed %d\n", __func__, err);
+}
 OMAP_SYS_TIMER(5)
 #endif
 
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index de47f170ba50..45f77413c21d 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -29,6 +29,7 @@
 #include <plat/i2c.h>
 #include <plat/usb.h>
 
+#include "soc.h"
 #include "twl-common.h"
 #include "pm.h"
 #include "voltage.h"
@@ -39,16 +40,6 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.flags		= I2C_CLIENT_WAKE,
 };
 
-static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
-	{
-		.addr		= 0x48,
-		.flags		= I2C_CLIENT_WAKE,
-	},
-	{
-		I2C_BOARD_INFO("twl6040", 0x4b),
-	},
-};
-
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static int twl_set_voltage(void *data, int target_uV)
 {
@@ -67,6 +58,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
 {
+	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(pmic_i2c_board_info.type, pmic_type,
 		sizeof(pmic_i2c_board_info.type));
 	pmic_i2c_board_info.irq = pmic_irq;
@@ -77,30 +69,25 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 
 void __init omap4_pmic_init(const char *pmic_type,
 		    struct twl4030_platform_data *pmic_data,
-		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+		    struct i2c_board_info *devices, int nr_devices)
 {
 	/* PMIC part*/
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
-	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
-		sizeof(omap4_i2c1_board_info[0].type));
-	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
-	omap4_i2c1_board_info[0].platform_data = pmic_data;
-
-	/* TWL6040 audio IC part */
-	omap4_i2c1_board_info[1].irq = twl6040_irq;
-	omap4_i2c1_board_info[1].platform_data = twl6040_data;
-
-	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
+	/* Register additional devices on i2c1 bus if needed */
+	if (devices)
+		i2c_register_board_info(1, devices, nr_devices);
 }
 
 void __init omap_pmic_late_init(void)
 {
-	/* Init the OMAP TWL parameters (if PMIC has been registered) */
-	if (pmic_i2c_board_info.irq)
-		omap3_twl_init();
-	if (omap4_i2c1_board_info[0].irq)
-		omap4_twl_init();
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
@@ -250,11 +237,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 
 #if defined(CONFIG_ARCH_OMAP4)
 static struct twl4030_usb_data omap4_usb_pdata = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
 };
 
 static struct regulator_init_data omap4_vdac_idata = {
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 8fe71cfd002c..2256efe90cf1 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,7 +1,7 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
-#include <plat/irqs.h>
+#include "common.h"
 
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)
@@ -32,6 +32,7 @@
 
 struct twl4030_platform_data;
 struct twl6040_platform_data;
+struct i2c_board_info;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
@@ -40,18 +41,18 @@ void omap_pmic_late_init(void);
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
 {
-	omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+	omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
 }
 
 static inline void omap3_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
 {
-	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+	omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
 }
 
 void omap4_pmic_init(const char *pmic_type,
 		    struct twl4030_platform_data *pmic_data,
-		    struct twl6040_platform_data *audio_data, int twl6040_irq);
+		    struct i2c_board_info *devices, int nr_devices);
 
 void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 			   u32 pdata_flags, u32 regulators_flags);
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index dde8a11f47d5..3c434498e12e 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -25,8 +25,6 @@
 
 #include <asm/io.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
 
@@ -35,10 +33,12 @@
 #ifdef CONFIG_MFD_OMAP_USB_HOST
 
 #define OMAP_USBHS_DEVICE	"usbhs_omap"
+#define OMAP_USBTLL_DEVICE	"usbhs_tll"
 #define	USBHS_UHH_HWMODNAME	"usb_host_hs"
 #define USBHS_TLL_HWMODNAME	"usb_tll_hs"
 
 static struct usbhs_omap_platform_data		usbhs_data;
+static struct usbtll_omap_platform_data		usbtll_data;
 static struct ehci_hcd_omap_platform_data	ehci_data;
 static struct ohci_hcd_omap_platform_data	ohci_data;
 
@@ -487,13 +487,14 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
-	struct omap_hwmod	*oh[2];
+	struct omap_hwmod	*uhh_hwm, *tll_hwm;
 	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 		usbhs_data.port_mode[i] = pdata->port_mode[i];
+		usbtll_data.port_mode[i] = pdata->port_mode[i];
 		ohci_data.port_mode[i] = pdata->port_mode[i];
 		ehci_data.port_mode[i] = pdata->port_mode[i];
 		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
@@ -512,25 +513,35 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		setup_4430ohci_io_mux(pdata->port_mode);
 	}
 
-	oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
-	if (!oh[0]) {
+	uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
+	if (!uhh_hwm) {
 		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
 		return;
 	}
 
-	oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
-	if (!oh[1]) {
+	tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
+	if (!tll_hwm) {
 		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
 		return;
 	}
 
-	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
-				(void *)&usbhs_data, sizeof(usbhs_data),
+	pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
+				&usbtll_data, sizeof(usbtll_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
 	if (IS_ERR(pdev)) {
-		pr_err("Could not build hwmod devices %s,%s\n",
-			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
+		pr_err("Could not build hwmod device %s\n",
+		       USBHS_TLL_HWMODNAME);
+		return;
+	}
+
+	pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
+				&usbhs_data, sizeof(usbhs_data),
+				omap_uhhtll_latency,
+				ARRAY_SIZE(omap_uhhtll_latency), false);
+	if (IS_ERR(pdev)) {
+		pr_err("Could not build hwmod devices %s\n",
+		       USBHS_UHH_HWMODNAME);
 		return;
 	}
 }
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index c4a576856661..51da21cb78f1 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -23,14 +23,13 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-
 #include <linux/usb/musb.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/am35xx.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
+
+#include "am35xx.h"
+
 #include "mux.h"
 
 static struct musb_hdrc_config musb_config = {
@@ -117,7 +116,4 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	dev->dma_mask = &musb_dmamask;
 	dev->coherent_dma_mask = musb_dmamask;
 	put_device(dev);
-
-	if (cpu_is_omap44xx())
-		omap4430_phy_init(dev);
 }
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 84da34f9a7cf..880249b17012 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -12,8 +12,7 @@
 #include <linux/init.h>
 #include <linux/bug.h>
 
-#include <plat/cpu.h>
-
+#include "soc.h"
 #include "voltage.h"
 #include "vc.h"
 #include "prm-regbits-34xx.h"
@@ -116,9 +115,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
 	}
 
 	if (!voltdm->pmic->uv_to_vsel) {
-		pr_err("%s: PMIC function to convert voltage in uV to"
-			"vsel not registered. Hence unable to scale voltage"
-			"for vdd_%s\n", __func__, voltdm->name);
+		pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n",
+		       __func__, voltdm->name);
 		return -ENODATA;
 	}
 
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 4dc60e83e00d..3ac8fe1d8213 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -195,8 +195,8 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 			return &voltdm->volt_data[i];
 	}
 
-	pr_notice("%s: Unable to match the current voltage with the voltage"
-		"table for vdd_%s\n", __func__, voltdm->name);
+	pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n",
+		  __func__, voltdm->name);
 
 	return ERR_PTR(-ENODATA);
 }
@@ -249,8 +249,8 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
 		voltdm->scale = omap_vc_bypass_scale;
 		return;
 	default:
-		pr_warning("%s: Trying to change the method of voltage scaling"
-			"to an unsupported one!\n", __func__);
+		pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n",
+			__func__);
 	}
 }
 
@@ -331,8 +331,8 @@ int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
 	if (!voltdm || !pwrdm)
 		return -EINVAL;
 
-	pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
-		 "%s\n", pwrdm->name, voltdm->name);
+	pr_debug("voltagedomain: %s: associating powerdomain %s\n",
+		 voltdm->name, pwrdm->name);
 
 	list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
 
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 0ac2caf15941..7283b7ed7de8 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -16,7 +16,7 @@
 
 #include <linux/err.h>
 
-#include <plat/voltage.h>
+#include <linux/platform_data/voltage-omap.h>
 
 #include "vc.h"
 #include "vp.h"
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index d0103c80d040..63afbfed3cbc 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -18,9 +18,8 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
+#include "soc.h"
 #include "common.h"
-#include <plat/cpu.h>
-
 #include "prm-regbits-34xx.h"
 #include "omap_opp_data.h"
 #include "voltage.h"
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index f95c1bad9dc6..85241b828c02 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -138,8 +138,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
 		udelay(1);
 	}
 	if (timeout >= VP_TRANXDONE_TIMEOUT) {
-		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
-			"Voltage change aborted", __func__, voltdm->name);
+		pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted",
+			__func__, voltdm->name);
 		return -ETIMEDOUT;
 	}
 
@@ -157,9 +157,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
 	omap_test_timeout(vp->common->ops->check_txdone(vp->id),
 			  VP_TRANXDONE_TIMEOUT, timeout);
 	if (timeout >= VP_TRANXDONE_TIMEOUT)
-		pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
-			"TRANXDONE never got set after the voltage update\n",
-			__func__, voltdm->name);
+		pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n",
+		       __func__, voltdm->name);
 
 	omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
 
@@ -176,8 +175,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
 	}
 
 	if (timeout >= VP_TRANXDONE_TIMEOUT)
-		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
-			"to clear the TRANXDONE status\n",
+		pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n",
 			__func__, voltdm->name);
 
 	/* Clear force bit */
@@ -257,8 +255,8 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 
 	/* If VP is already disabled, do nothing. Return */
 	if (!vp->enabled) {
-		pr_warning("%s: Trying to disable VP for vdd_%s when"
-			"it is already disabled\n", __func__, voltdm->name);
+		pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n",
+			__func__, voltdm->name);
 		return;
 	}
 
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index eaac83d1df6f..b5efc0fd31cb 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE);
 }
 
 void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 9148b229d0de..b3eb3da01160 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -30,8 +30,8 @@
 #include <mach/bridge-regs.h>
 #include <mach/hardware.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -42,22 +42,12 @@
  ****************************************************************************/
 static struct map_desc orion5x_io_desc[] __initdata = {
 	{
-		.virtual	= ORION5X_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) ORION5X_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
 		.length		= ORION5X_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= ORION5X_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
-		.length		= ORION5X_PCIE_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ORION5X_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
-		.length		= ORION5X_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ORION5X_PCIE_WA_VIRT_BASE,
+		.virtual	= (unsigned long) ORION5X_PCIE_WA_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
 		.length		= ORION5X_PCIE_WA_SIZE,
 		.type		= MT_DEVICE,
@@ -109,7 +99,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR);
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -203,6 +194,13 @@ void __init orion5x_wdt_init(void)
 void __init orion5x_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/*
+	 * Some Orion5x devices allocate their coherent buffers from atomic
+	 * context. Increase size of atomic coherent pool to make sure such
+	 * the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int orion5x_tclk;
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index d75dcfa0f01c..e3629c063df2 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -27,6 +27,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 49a3fd630313..41fe2b1ff47c 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index d470864b4e42..e533588880ff 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -34,6 +34,7 @@
 #include <asm/mach/pci.h>
 #include <asm/system_info.h>
 #include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -700,7 +701,7 @@ static void __init dns323_init(void)
 		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
 		 * somebody else test it.
 		 */
-		writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+		writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
 		break;
 	}
 }
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 11a3c1e9801f..461fd69a10ae 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -13,27 +13,27 @@
 
 #include <mach/orion5x.h>
 
-#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE | 0x100)
+#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE + 0x100)
 
-#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
+#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE + 0x104)
 
-#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x108)
 #define WDT_RESET_OUT_EN	0x0002
 
-#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE + 0x10c)
 
-#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x110)
 
-#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE + 0x11C)
 
 #define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
+#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x200)
 
-#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
+#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x204)
 
-#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE | 0x300)
+#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE + 0x300)
+#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE + 0x300)
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
deleted file mode 100644
index a1d0b78decb1..000000000000
--- a/arch/arm/mach-orion5x/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
deleted file mode 100644
index 1aa5d0a50a0b..000000000000
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <mach/orion5x.h>
-#include <asm/sizes.h>
-
-#define IO_SPACE_LIMIT		SZ_2M
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			 __io(a)
-#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 683e085ce162..d265f5484a8e 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -31,31 +31,29 @@
  * fc000000	device bus mappings (cs0/cs1)
  *
  * virt		phys		size
- * fdd00000	f1000000	1M	on-chip peripheral registers
- * fde00000	f2000000	1M	PCIe I/O space
- * fdf00000	f2100000	1M	PCI I/O space
- * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
+ * fe000000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f2000000	64K	PCIe I/O space
+ * fee10000	f2100000	64K	PCI I/O space
+ * fd000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
  ****************************************************************************/
 #define ORION5X_REGS_PHYS_BASE		0xf1000000
-#define ORION5X_REGS_VIRT_BASE		0xfdd00000
+#define ORION5X_REGS_VIRT_BASE		IOMEM(0xfe000000)
 #define ORION5X_REGS_SIZE		SZ_1M
 
 #define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
 #define ORION5X_PCIE_IO_BUS_BASE	0x00000000
-#define ORION5X_PCIE_IO_SIZE		SZ_1M
+#define ORION5X_PCIE_IO_SIZE		SZ_64K
 
 #define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE		0x00100000
-#define ORION5X_PCI_IO_SIZE		SZ_1M
+#define ORION5X_PCI_IO_BUS_BASE		0x00010000
+#define ORION5X_PCI_IO_SIZE		SZ_64K
 
 #define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
 #define ORION5X_SRAM_SIZE		SZ_8K
 
 /* Relevant only for Orion-1/Orion-NAS */
 #define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
+#define ORION5X_PCIE_WA_VIRT_BASE	IOMEM(0xfd000000)
 #define ORION5X_PCIE_WA_SIZE		SZ_16M
 
 #define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
@@ -68,42 +66,42 @@
  * Orion Registers Map
  ******************************************************************************/
 
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define  ORION5X_DDR_WINDOW_CPU_BASE    (ORION5X_DDR_VIRT_BASE | 0x1500)
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x00000)
+#define  ORION5X_DDR_WINDOW_CPU_BASE    (ORION5X_DDR_VIRT_BASE + 0x1500)
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE + (x))
 #define  GPIO_VIRT_BASE			ORION5X_DEV_BUS_REG(0x0100)
-#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE + 0x2100)
 
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x20000)
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x20000)
 
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x30000)
 
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x40000)
 
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x50000)
 
-#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x60900)
 
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x70000)
 
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x80000)
 
-#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x90000)
 
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0xa0000)
 
 /*******************************************************************************
  * Device Bus Registers
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 17da7091d310..30a192b9c517 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -12,7 +12,9 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
+#include <plat/orion-gpio.h>
 #include <plat/irq.h>
 
 static int __initdata gpio0_irqs[4] = {
@@ -24,11 +26,11 @@ static int __initdata gpio0_irqs[4] = {
 
 void __init orion5x_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
+	orion_irq_init(0, MAIN_IRQ_MASK);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
 			IRQ_ORION5X_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 1e458efafb9a..f1ae10ae5bd4 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 0180c393c711..3506f16c0bf2 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -25,6 +25,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index cb19e1661bb3..cd50e328db2a 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -38,7 +38,7 @@
 /*****************************************************************************
  * PCIe controller
  ****************************************************************************/
-#define PCIE_BASE	((void __iomem *)ORION5X_PCIE_VIRT_BASE)
+#define PCIE_BASE	(ORION5X_PCIE_VIRT_BASE)
 
 void __init orion5x_pcie_id(u32 *dev, u32 *rev)
 {
@@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-	ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
+	ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE,
 				    bus, devfn, where, size, val);
 
 	return ret;
@@ -162,35 +162,25 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
+	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE);
+
 	/*
 	 * Request resources.
 	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (!res)
 		panic("pcie_setup unable to alloc resources");
 
 	/*
-	 * IORESOURCE_IO
-	 */
-	sys->io_offset = 0;
-	res[0].name = "PCIe I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION5X_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
-	/*
 	 * IORESOURCE_MEM
 	 */
-	res[1].name = "PCIe Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION5X_PCIE_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
+	res->name = "PCIe Memory Space";
+	res->flags = IORESOURCE_MEM;
+	res->start = ORION5X_PCIE_MEM_PHYS_BASE;
+	res->end = res->start + ORION5X_PCIE_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, res))
 		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
 
 	return 1;
 }
@@ -198,7 +188,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * PCI controller
  ****************************************************************************/
-#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE | (x))
+#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE + (x))
 #define PCI_MODE		ORION5X_PCI_REG(0xd00)
 #define PCI_CMD			ORION5X_PCI_REG(0xc00)
 #define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
@@ -489,35 +479,25 @@ static int __init pci_setup(struct pci_sys_data *sys)
 	 */
 	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
 
+	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE);
+
 	/*
 	 * Request resources
 	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (!res)
 		panic("pci_setup unable to alloc resources");
 
 	/*
-	 * IORESOURCE_IO
-	 */
-	sys->io_offset = 0;
-	res[0].name = "PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION5X_PCI_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCI IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
-	/*
 	 * IORESOURCE_MEM
 	 */
-	res[1].name = "PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION5X_PCI_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
+	res->name = "PCI Memory Space";
+	res->flags = IORESOURCE_MEM;
+	res->start = ORION5X_PCI_MEM_PHYS_BASE;
+	res->end = res->start + ORION5X_PCI_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, res))
 		panic("Request PCI Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
 
 	return 1;
 }
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 78a6a11d8216..9b1c95310291 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -18,7 +18,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 2f5dc54cd4cd..51ba2b81a10b 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -19,7 +19,6 @@
 #include <linux/i2c.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 399130fac0b6..0a56b9444f1b 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,8 +19,8 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
@@ -53,12 +53,6 @@
 #define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
 #define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
 
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED		0
-
 /*****************************************************************************
  * 16M NOR Flash on Device bus CS1
  ****************************************************************************/
@@ -83,55 +77,32 @@ static struct platform_device rd88f5182_nor_flash = {
 	.resource		= &rd88f5182_nor_flash_resource,
 };
 
-#ifdef CONFIG_LEDS
-
 /*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
  ****************************************************************************/
 
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
-	int val;
-
-	if (evt == led_idle_end)
-		val = 1;
-	else if (evt == led_idle_start)
-		val = 0;
-	else
-		return;
-
-	gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
-	int pin;
-
-	if (machine_is_rd88f5182()) {
-		pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED		0
 
-		if (gpio_request(pin, "DBGLED") == 0) {
-			if (gpio_direction_output(pin, 0) != 0) {
-				printk(KERN_ERR "rd88f5182_dbgled_init failed "
-						"to set output pin %d\n", pin);
-				gpio_free(pin);
-				return 0;
-			}
-		} else {
-			printk(KERN_ERR "rd88f5182_dbgled_init failed "
-					"to request gpio %d\n", pin);
-			return 0;
-		}
-
-		leds_event = rd88f5182_dbgled_event;
-	}
-
-	return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+	{
+		.name		= "rd88f5182:cpu",
+		.default_trigger = "cpu0",
+		.gpio		= RD88F5182_GPIO_LED,
+	},
+};
 
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+	.leds		= rd88f5182_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
 
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rd88f5182_gpio_led_data,
+	},
+};
 
 /*****************************************************************************
  * PCI
@@ -298,6 +269,7 @@ static void __init rd88f5182_init(void)
 
 	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
 	platform_device_register(&rd88f5182_nor_flash);
+	platform_device_register(&rd88f5182_gpio_leds);
 
 	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
 }
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 92df49c1b62a..ed50910b08a4 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -20,7 +20,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b4203277f3cd..b0727dcd1ef9 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -36,7 +36,7 @@
  * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
  */
 #define TS78XX_FPGA_REGS_PHYS_BASE	0xe8000000
-#define TS78XX_FPGA_REGS_VIRT_BASE	0xff900000
+#define TS78XX_FPGA_REGS_VIRT_BASE	IOMEM(0xff900000)
 #define TS78XX_FPGA_REGS_SIZE		SZ_1M
 
 static struct ts78xx_fpga_data ts78xx_fpga = {
@@ -50,7 +50,7 @@ static struct ts78xx_fpga_data ts78xx_fpga = {
  ****************************************************************************/
 static struct map_desc ts78xx_io_desc[] __initdata = {
 	{
-		.virtual	= TS78XX_FPGA_REGS_VIRT_BASE,
+		.virtual	= (unsigned long)TS78XX_FPGA_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
 		.length		= TS78XX_FPGA_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -80,8 +80,8 @@ static struct mv_sata_platform_data ts78xx_sata_data = {
 /*****************************************************************************
  * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
  ****************************************************************************/
-#define TS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-#define TS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+#define TS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE + 0x808)
+#define TS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE + 0x80c)
 
 static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
 {
@@ -162,8 +162,8 @@ static void ts78xx_ts_rtc_unload(void)
 /*****************************************************************************
  * NAND Flash
  ****************************************************************************/
-#define TS_NAND_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x800)	/* VIRT */
-#define TS_NAND_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x804)	/* PHYS */
+#define TS_NAND_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE + 0x800)	/* VIRT */
+#define TS_NAND_DATA	(TS78XX_FPGA_REGS_PHYS_BASE + 0x804)	/* PHYS */
 
 /*
  * hardware specific access to control-lines
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
new file mode 100644
index 000000000000..868796f8085c
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -0,0 +1,14 @@
+config ARCH_PICOXCELL
+	bool "Picochip PicoXcell" if ARCH_MULTI_V6
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_PATCH_PHYS_VIRT
+	select ARM_VIC
+	select CPU_V6K
+	select DW_APB_TIMER
+	select DW_APB_TIMER_OF
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_TCM
+	select NO_IOPORT
+	select SPARSE_IRQ
+	select USE_OF
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
deleted file mode 100644
index b3271754e9fd..000000000000
--- a/arch/arm/mach-picoxcell/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index 8f9a0b47a7fa..f6c0849af5e9 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -20,14 +20,15 @@
 #include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
 #include "common.h"
 
-#define WDT_CTRL_REG_EN_MASK	(1 << 0)
-#define WDT_CTRL_REG_OFFS	(0x00)
-#define WDT_TIMEOUT_REG_OFFS	(0x04)
+#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
+#define PICOXCELL_PERIPH_BASE		0x80000000
+#define PICOXCELL_PERIPH_LENGTH		SZ_4M
+
+#define WDT_CTRL_REG_EN_MASK		(1 << 0)
+#define WDT_CTRL_REG_OFFS		(0x00)
+#define WDT_TIMEOUT_REG_OFFS		(0x04)
 static void __iomem *wdt_regs;
 
 /*
diff --git a/arch/arm/mach-picoxcell/include/mach/gpio.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
deleted file mode 100644
index c06afad218bb..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/map.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_MAP_H__
-#define __PICOXCELL_MAP_H__
-
-#define PHYS_TO_IO(x)		(((x) & 0x00ffffff) | 0xfe000000)
-
-#ifdef __ASSEMBLY__
-#define IO_ADDRESS(x)		PHYS_TO_IO((x))
-#else
-#define IO_ADDRESS(x)		(void __iomem __force *)(PHYS_TO_IO((x)))
-#endif
-
-#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
deleted file mode 100644
index 5566fc88ddbc..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_SOC_H__
-#define __PICOXCELL_SOC_H__
-
-#define PICOXCELL_UART1_BASE		0x80230000
-#define PICOXCELL_PERIPH_BASE		0x80000000
-#define PICOXCELL_PERIPH_LENGTH		SZ_4M
-#define PICOXCELL_VIC0_BASE		0x80060000
-#define PICOXCELL_VIC1_BASE		0x80064000
-
-#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
deleted file mode 100644
index 6c540a69f405..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __TIMEX_H__
-#define __TIMEX_H__
-
-/* Bogus value to allow the kernel to compile. */
-#define CLOCK_TICK_RATE		1000000
-
-#endif /* __TIMEX_H__ */
-
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
deleted file mode 100644
index b60b19d1d739..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/uncompress.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
deleted file mode 100644
index 777564c90a12..000000000000
--- a/arch/arm/mach-pnx4008/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y			:= core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot
deleted file mode 100644
index 9fa19baa7f2e..000000000000
--- a/arch/arm/mach-pnx4008/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
-
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
deleted file mode 100644
index a4a3819c96cb..000000000000
--- a/arch/arm/mach-pnx4008/clock.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.c
- *
- * Clock control driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- * Generic clock management functions are partially based on:
- *  linux/arch/arm/mach-omap/clock.c
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-#include "clock.h"
-
-/*forward declaration*/
-static struct clk per_ck;
-static struct clk hclk_ck;
-static struct clk ck_1MHz;
-static struct clk ck_13MHz;
-static struct clk ck_pll1;
-static int local_set_rate(struct clk *clk, u32 rate);
-
-static inline void clock_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void clock_unlock(void)
-{
-	local_irq_enable();
-}
-
-static void propagate_rate(struct clk *clk)
-{
-	struct clk *tmp_clk;
-
-	tmp_clk = clk;
-	while (tmp_clk->propagate_next) {
-		tmp_clk = tmp_clk->propagate_next;
-		local_set_rate(tmp_clk, tmp_clk->user_rate);
-	}
-}
-
-static void clk_reg_disable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) &
-			     ~(1 << clk->enable_shift), clk->enable_reg);
-}
-
-static int clk_reg_enable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) |
-			     (1 << clk->enable_shift), clk->enable_reg);
-	return 0;
-}
-
-static inline void clk_reg_disable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) &
-			     ~(1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static inline void clk_reg_enable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) |
-			     (1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static int clk_wait_for_pll_lock(struct clk *clk)
-{
-	int i;
-	i = 0;
-	while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ;	/*wait for PLL to lock */
-
-	if (!(__raw_readl(clk->scale_reg) & 1)) {
-		printk(KERN_ERR
-		       "%s ERROR: failed to lock, scale reg data: %x\n",
-		       clk->name, __raw_readl(clk->scale_reg));
-		return -1;
-	}
-	return 0;
-}
-
-static int switch_to_dirty_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
-	if (!(tmp_reg & 1)) {
-		tmp_reg |= (1 << 1);	/* Trigger switch to 13'MHz (dirty) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13'MHz selection status */
-
-		if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int switch_to_clean_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
-	if (tmp_reg & 1) {
-		tmp_reg &= ~(1 << 1);	/* Trigger switch to 13MHz (clean) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13MHz selection status */
-
-		if (__raw_readl(clk->parent_switch_reg) & 1) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int set_13MHz_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-
-	if (parent == &ck_13MHz)
-		ret = switch_to_clean_13mhz(clk);
-	else if (parent == &ck_pll1)
-		ret = switch_to_dirty_13mhz(clk);
-
-	return ret;
-}
-
-#define PLL160_MIN_FCCO 156000
-#define PLL160_MAX_FCCO 320000
-
-/*
- * Calculate pll160 settings.
- * Possible input: up to 320MHz with step of clk->parent->rate.
- * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
- * Ignored paths: "feedback" (bit 13 set), "div-by-N".
- * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
- * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
- * Please refer to PNX4008 IC manual for details.
- */
-
-static int pll160_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp_reg, tmp_m, tmp_2p, i;
-	u32 parent_rate;
-	int ret = -EINVAL;
-
-	parent_rate = clk->parent->rate;
-
-	if (!parent_rate)
-		goto out;
-
-	/* set direct run for ARM or disable output for others  */
-	clk_reg_disable(clk);
-
-	/* disable source input as well (ignored for ARM) */
-	clk_reg_disable1(clk);
-
-	tmp_reg = __raw_readl(clk->scale_reg);
-	tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	rate -= rate % parent_rate;	/*round down the input */
-
-	if (rate > PLL160_MAX_FCCO)
-		rate = PLL160_MAX_FCCO;
-
-	if (!rate) {
-		clk->rate = 0;
-		ret = 0;
-		goto out;
-	}
-
-	clk_reg_enable1(clk);
-	tmp_reg = __raw_readl(clk->scale_reg);
-
-	if (rate == parent_rate) {
-		/*enter direct bypass mode */
-		tmp_reg |= ((1 << 14) | (1 << 15));
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = parent_rate;
-		clk_reg_enable(clk);
-		ret = 0;
-		goto out;
-	}
-
-	i = 0;
-	for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
-		if (rate * tmp_2p >= PLL160_MIN_FCCO)
-			break;
-		i++;
-	}
-
-	if (tmp_2p > 1)
-		tmp_reg |= ((i - 1) << 11);
-	else
-		tmp_reg |= (1 << 14);	/*direct mode, no divide */
-
-	tmp_m = rate * tmp_2p;
-	tmp_m /= parent_rate;
-
-	tmp_reg |= (tmp_m - 1) << 1;	/*calculate M */
-	tmp_reg |= (1 << 16);	/*power up PLL */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	if (clk_wait_for_pll_lock(clk) < 0) {
-		clk_reg_disable(clk);
-		clk_reg_disable1(clk);
-
-		tmp_reg = __raw_readl(clk->scale_reg);
-		tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = 0;
-		ret = -EFAULT;
-		goto out;
-	}
-
-	clk->rate = (tmp_m * parent_rate) / tmp_2p;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
-
-	clk_reg_enable(clk);
-	ret = 0;
-
-out:
-	return ret;
-}
-
-/*configure PER_CLK*/
-static int per_clk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->scale_reg);
-	tmp &= ~(0x1f << 2);
-	tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-/*configure HCLK*/
-static int hclk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-	tmp = __raw_readl(clk->scale_reg);
-	tmp = tmp & ~0x3;
-	switch (rate) {
-	case 1:
-		break;
-	case 2:
-		tmp |= 1;
-		break;
-	case 4:
-		tmp |= 2;
-		break;
-	}
-
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-static u32 hclk_round_rate(struct clk *clk, u32 rate)
-{
-	switch (rate) {
-	case 1:
-	case 4:
-		return rate;
-	}
-	return 2;
-}
-
-static u32 per_clk_round_rate(struct clk *clk, u32 rate)
-{
-	return CLK_RATE_13MHZ;
-}
-
-static int on_off_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_enable(clk);
-		clk->rate = 1;
-	} else {
-		clk_reg_disable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static int on_off_inv_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		clk->rate = 1;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static u32 on_off_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? 1 : 0);
-}
-
-static u32 pll4_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
-		rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
-	return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
-}
-
-static u32 pll3_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	return (rate - rate % CLK_RATE_13MHZ);
-}
-
-static u32 pll5_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_48MHZ : 0);
-}
-
-static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_13MHZ : 0);
-}
-
-static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		udelay(500);
-		clk->rate = CLK_RATE_13MHZ;
-		ck_1MHz.rate = CLK_RATE_1MHZ;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-		ck_1MHz.rate = 0;
-	}
-	return 0;
-}
-
-static int pll1_set_rate(struct clk *clk, u32 rate)
-{
-#if 0 /* doesn't work on some boards, probably a HW BUG */
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		if (!clk_wait_for_pll_lock(clk)) {
-			clk->rate = CLK_RATE_13MHZ;
-		} else {
-			clk_reg_enable(clk);
-			clk->rate = 0;
-		}
-
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-#endif
-	return 0;
-}
-
-/* Clock sources */
-
-static struct clk osc_13MHz = {
-	.name = "osc_13MHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk ck_13MHz = {
-	.name = "ck_13MHz",
-	.parent = &osc_13MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &ck_13MHz_set_rate,
-	.enable_reg = OSC13CTRL_REG,
-	.enable_shift = 0,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk osc_32KHz = {
-	.name = "osc_32KHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_32KHZ,
-};
-
-/*attached to PLL5*/
-static struct clk ck_1MHz = {
-	.name = "ck_1MHz",
-	.flags = FIXED_RATE | PARENT_SET_RATE,
-	.parent = &ck_13MHz,
-};
-
-/* PLL1 (397) - provides 13' MHz clock */
-static struct clk ck_pll1 = {
-	.name = "ck_pll1",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &pll1_set_rate,
-	.enable_reg = PLLCTRL_REG,
-	.enable_shift = 1,
-	.scale_reg = PLLCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-};
-
-/* CPU/Bus PLL */
-static struct clk ck_pll4 = {
-	.name = "ck_pll4",
-	.parent = &ck_pll1,
-	.flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
-	.propagate_next = &per_ck,
-	.round_rate = &pll4_round_rate,
-	.set_rate = &pll160_set_rate,
-	.rate = CLK_RATE_208MHZ,
-	.scale_reg = HCLKPLLCTRL_REG,
-	.enable_reg = PWRCTRL_REG,
-	.enable_shift = 2,
-	.parent_switch_reg = SYSCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-/* USB PLL */
-static struct clk ck_pll5 = {
-	.name = "ck_pll5",
-	.parent = &ck_1MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll5_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = USBCTRL_REG,
-	.enable_reg = USBCTRL_REG,
-	.enable_shift = 18,
-	.enable_reg1 = USBCTRL_REG,
-	.enable_shift1 = 17,
-};
-
-/* XPERTTeak DSP PLL */
-static struct clk ck_pll3 = {
-	.name = "ck_pll3",
-	.parent = &ck_pll1,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll3_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = DSPPLLCTRL_REG,
-	.enable_reg = DSPCLKCTRL_REG,
-	.enable_shift = 3,
-	.enable_reg1 = DSPCLKCTRL_REG,
-	.enable_shift1 = 2,
-	.parent_switch_reg = DSPCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-static struct clk hclk_ck = {
-	.name = "hclk_ck",
-	.parent = &ck_pll4,
-	.flags = PARENT_SET_RATE,
-	.set_rate = &hclk_set_rate,
-	.round_rate = &hclk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = 2,
-	.user_rate = 2,
-};
-
-static struct clk per_ck = {
-	.name = "per_ck",
-	.parent = &ck_pll4,
-	.flags = FIXED_RATE,
-	.propagate_next = &hclk_ck,
-	.set_rate = &per_clk_set_rate,
-	.round_rate = &per_clk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-	.user_rate = CLK_RATE_13MHZ,
-};
-
-static struct clk m2hclk_ck = {
-	.name = "m2hclk_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_inv_set_rate,
-	.rate = 1,
-	.enable_shift = 6,
-	.enable_reg = PWRCTRL_REG,
-};
-
-static struct clk vfp9_ck = {
-	.name = "vfp9_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 4,
-	.enable_reg = VFP9CLKCTRL_REG,
-};
-
-static struct clk keyscan_ck = {
-	.name = "keyscan_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = KEYCLKCTRL_REG,
-};
-
-static struct clk touch_ck = {
-	.name = "touch_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = TSCLKCTRL_REG,
-};
-
-static struct clk pwm1_ck = {
-	.name = "pwm1_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk pwm2_ck = {
-	.name = "pwm2_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 2,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk jpeg_ck = {
-	.name = "jpeg_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = JPEGCLKCTRL_REG,
-};
-
-static struct clk ms_ck = {
-	.name = "ms_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 5,
-	.enable_reg = MSCTRL_REG,
-};
-
-static struct clk dum_ck = {
-	.name = "dum_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DUMCLKCTRL_REG,
-};
-
-static struct clk flash_ck = {
-	.name = "flash_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,	/* Only MLC clock supported */
-	.enable_reg = FLASHCLKCTRL_REG,
-};
-
-static struct clk i2c0_ck = {
-	.name = "i2c0_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 0,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c1_ck = {
-	.name = "i2c1_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 1,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c2_ck = {
-	.name = "i2c2_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 2,
-	.enable_reg = USB_OTG_CLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk spi0_ck = {
-	.name = "spi0_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk spi1_ck = {
-	.name = "spi1_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 4,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk dma_ck = {
-	.name = "dma_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DMACLKCTRL_REG,
-};
-
-static struct clk uart3_ck = {
-	.name = "uart3_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 0,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart4_ck = {
-	.name = "uart4_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart5_ck = {
-	.name = "uart5_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 2,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart6_ck = {
-	.name = "uart6_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 3,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk wdt_ck = {
-	.name = "wdt_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.enable_shift = 0,
-	.enable_reg = TIMCLKCTRL_REG,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-/* These clocks are visible outside this module
- * and can be initialized
- */
-static struct clk *onchip_clks[] __initdata = {
-	&ck_13MHz,
-	&ck_pll1,
-	&ck_pll4,
-	&ck_pll5,
-	&ck_pll3,
-	&vfp9_ck,
-	&m2hclk_ck,
-	&hclk_ck,
-	&dma_ck,
-	&flash_ck,
-	&dum_ck,
-	&keyscan_ck,
-	&pwm1_ck,
-	&pwm2_ck,
-	&jpeg_ck,
-	&ms_ck,
-	&touch_ck,
-	&i2c0_ck,
-	&i2c1_ck,
-	&i2c2_ck,
-	&spi0_ck,
-	&spi1_ck,
-	&uart3_ck,
-	&uart4_ck,
-	&uart5_ck,
-	&uart6_ck,
-	&wdt_ck,
-};
-
-static struct clk_lookup onchip_clkreg[] = {
-	{ .clk = &ck_13MHz,	.con_id = "ck_13MHz"	},
-	{ .clk = &ck_pll1,	.con_id = "ck_pll1"	},
-	{ .clk = &ck_pll4,	.con_id = "ck_pll4"	},
-	{ .clk = &ck_pll5,	.con_id = "ck_pll5"	},
-	{ .clk = &ck_pll3,	.con_id = "ck_pll3"	},
-	{ .clk = &vfp9_ck,	.con_id = "vfp9_ck"	},
-	{ .clk = &m2hclk_ck,	.con_id = "m2hclk_ck"	},
-	{ .clk = &hclk_ck,	.con_id = "hclk_ck"	},
-	{ .clk = &dma_ck,	.con_id = "dma_ck"	},
-	{ .clk = &flash_ck,	.con_id = "flash_ck"	},
-	{ .clk = &dum_ck,	.con_id = "dum_ck"	},
-	{ .clk = &keyscan_ck,	.con_id = "keyscan_ck"	},
-	{ .clk = &pwm1_ck,	.con_id = "pwm1_ck"	},
-	{ .clk = &pwm2_ck,	.con_id = "pwm2_ck"	},
-	{ .clk = &jpeg_ck,	.con_id = "jpeg_ck"	},
-	{ .clk = &ms_ck,	.con_id = "ms_ck"	},
-	{ .clk = &touch_ck,	.con_id = "touch_ck"	},
-	{ .clk = &i2c0_ck,	.dev_id = "pnx-i2c.0"	},
-	{ .clk = &i2c1_ck,	.dev_id = "pnx-i2c.1"	},
-	{ .clk = &i2c2_ck,	.dev_id = "pnx-i2c.2"	},
-	{ .clk = &spi0_ck,	.con_id = "spi0_ck"	},
-	{ .clk = &spi1_ck,	.con_id = "spi1_ck"	},
-	{ .clk = &uart3_ck,	.con_id = "uart3_ck"	},
-	{ .clk = &uart4_ck,	.con_id = "uart4_ck"	},
-	{ .clk = &uart5_ck,	.con_id = "uart5_ck"	},
-	{ .clk = &uart6_ck,	.con_id = "uart6_ck"	},
-	{ .clk = &wdt_ck,	.dev_id = "pnx4008-watchdog" },
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	if (WARN_ON(clk->usecount == 0))
-		return;
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
-			clk->set_rate(clk, 0);
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->usecount == 0) {
-		if (clk->parent) {
-			ret = local_clk_enable(clk->parent);
-			if (ret != 0)
-				goto out;
-		}
-
-		if (clk->enable)
-			ret = clk->enable(clk);
-		else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
-			    && clk->user_rate)
-			ret = clk->set_rate(clk, clk->user_rate);
-
-		if (ret != 0 && clk->parent) {
-			local_clk_disable(clk->parent);
-			goto out;
-		}
-
-		clk->usecount++;
-	}
-out:
-	return ret;
-}
-
-static int local_set_rate(struct clk *clk, u32 rate)
-{
-	int ret = -EINVAL;
-	if (clk->set_rate) {
-
-		if (clk->user_rate == clk->rate && clk->parent->rate) {
-			/* if clock enabled or rate not set */
-			clk->user_rate = clk->round_rate(clk, rate);
-			ret = clk->set_rate(clk, clk->user_rate);
-		} else
-			clk->user_rate = clk->round_rate(clk, rate);
-		ret = 0;
-	}
-	return ret;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk->flags & FIXED_RATE)
-		goto out;
-
-	clock_lock();
-	if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
-
-		clk->user_rate = clk->round_rate(clk, rate);
-		/* parent clock needs to be refreshed
-		   for the setting to take effect */
-	} else {
-		ret = local_set_rate(clk, rate);
-	}
-	ret = 0;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_rate);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long ret;
-	clock_lock();
-	ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_enable(struct clk *clk)
-{
-	int ret;
-
-	clock_lock();
-	ret = local_clk_enable(clk);
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	clock_lock();
-	local_clk_disable(clk);
-	clock_unlock();
-}
-
-EXPORT_SYMBOL(clk_disable);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret;
-	clock_lock();
-	if (clk->round_rate)
-		ret = clk->round_rate(clk, rate);
-	else
-		ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -ENODEV;
-	if (!clk->set_parent)
-		goto out;
-
-	clock_lock();
-	ret = clk->set_parent(clk, parent);
-	if (!ret)
-		clk->parent = parent;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_parent);
-
-static int __init clk_init(void)
-{
-	struct clk **clkp;
-
-	/* Disable autoclocking, as it doesn't seem to work */
-	__raw_writel(0xff, AUTOCLK_CTRL);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-		struct clk *clk = *clkp;
-		if (clk->flags & NEEDS_INITIALIZATION) {
-			if (clk->set_rate) {
-				clk->user_rate = clk->rate;
-				local_set_rate(clk, clk->user_rate);
-				if (clk->set_parent)
-					clk->set_parent(clk, clk->parent);
-			}
-			if (clk->enable && clk->usecount)
-				clk->enable(clk);
-			if (clk->disable && !clk->usecount)
-				clk->disable(clk);
-		}
-		pr_debug("%s: clock %s, rate %ld\n",
-			__func__, clk->name, clk->rate);
-	}
-
-	local_clk_enable(&ck_pll4);
-
-	/* if ck_13MHz is not used, disable it. */
-	if (ck_13MHz.usecount == 0)
-		local_clk_disable(&ck_13MHz);
-
-	/* Disable autoclocking */
-	__raw_writeb(0xff, AUTOCLK_CTRL);
-
-	clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
-
-	return 0;
-}
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
deleted file mode 100644
index 39720d6c0d01..000000000000
--- a/arch/arm/mach-pnx4008/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - internal header file
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
-#define __ARCH_ARM_PNX4008_CLOCK_H__
-
-struct clk {
-	const char *name;
-	struct clk *parent;
-	struct clk *propagate_next;
-	u32 rate;
-	u32 user_rate;
-	s8 usecount;
-	u32 flags;
-	u32 scale_reg;
-	u8 enable_shift;
-	u32 enable_reg;
-	u8 enable_shift1;
-	u32 enable_reg1;
-	u32 parent_switch_reg;
-	u32(*round_rate) (struct clk *, u32);
-	int (*set_rate) (struct clk *, u32);
-	int (*set_parent) (struct clk * clk, struct clk * parent);
-	int (*enable)(struct clk *);
-	void (*disable)(struct clk *);
-};
-
-/* Flags */
-#define RATE_PROPAGATES      (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE      (1<<2)
-#define FIXED_RATE           (1<<3)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
deleted file mode 100644
index a00d2f1254ed..000000000000
--- a/arch/arm/mach-pnx4008/core.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/core.c
- *
- * PNX4008 core startup code
- *
- * Authors: Vitaly Wool, Dmitry Chigirev,
- * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/irq.h>
-#include <mach/clock.h>
-#include <mach/dma.h>
-
-struct resource spipnx_0_resources[] = {
-	{
-		.start = PNX4008_SPI1_BASE,
-		.end = PNX4008_SPI1_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI1_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI1_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	},
-};
-
-struct resource spipnx_1_resources[] = {
-	{
-		.start = PNX4008_SPI2_BASE,
-		.end = PNX4008_SPI2_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI2_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI2_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	}
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-	},
-};
-
-static struct platform_device spipnx_1 = {
-	.name = "spipnx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(spipnx_0_resources),
-	.resource = spipnx_0_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct platform_device spipnx_2 = {
-	.name = "spipnx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(spipnx_1_resources),
-	.resource = spipnx_1_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct plat_serial8250_port platform_serial_ports[] = {
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART5_BASE,
-		.irq = IIR5_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	},
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART3_BASE,
-		.irq = IIR3_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	 },
-	{}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = &platform_serial_ports,
-	},
-};
-
-static struct platform_device nand_flash_device = {
-	.name = "pnx4008-flash",
-	.id = -1,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
-		.end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_HOST_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name = "pnx4008-usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-static struct platform_device sdum_device = {
-	.name = "pnx4008-sdum",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct platform_device rgbfb_device = {
-	.name = "pnx4008-rgbfb",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-
-struct resource watchdog_resources[] = {
-	{
-		.start = PNX4008_WDOG_BASE,
-		.end = PNX4008_WDOG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&spipnx_1,
-	&spipnx_2,
-	&serial_device,
-	&ohci_device,
-	&nand_flash_device,
-	&sdum_device,
-	&rgbfb_device,
-	&watchdog_device,
-};
-
-
-extern void pnx4008_uart_init(void);
-
-static void __init pnx4008_init(void)
-{
-	/*disable all START interrupt sources,
-	   and clear all START interrupt flags */
-	__raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
-	__raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	/* Switch on the UART clocks */
-	pnx4008_uart_init();
-}
-
-static struct map_desc pnx4008_io_desc[] __initdata = {
-	{
-		.virtual 	= IO_ADDRESS(PNX4008_IRAM_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_IRAM_BASE),
-		.length		= SZ_64K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
-		.length		= SZ_1M - SZ_128K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
-		.length		= SZ_128K * 3,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_AHB2FAB_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_AHB2FAB_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	},
-};
-
-void __init pnx4008_map_io(void)
-{
-	iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
-}
-
-static void pnx4008_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-#ifdef CONFIG_PM
-extern int pnx4008_pm_init(void);
-#else
-static inline int pnx4008_pm_init(void) { return 0; }
-#endif
-
-void __init pnx4008_init_late(void)
-{
-	pnx4008_pm_init();
-}
-
-extern struct sys_timer pnx4008_timer;
-
-MACHINE_START(PNX4008, "Philips PNX4008")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset		= 0x100,
-	.map_io 		= pnx4008_map_io,
-	.init_irq 		= pnx4008_init_irq,
-	.init_machine 		= pnx4008_init,
-	.init_late		= pnx4008_init_late,
-	.timer 			= &pnx4008_timer,
-	.restart		= pnx4008_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
deleted file mode 100644
index a4739e9fb2fb..000000000000
--- a/arch/arm/mach-pnx4008/dma.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/dma.c
- *
- *  PNX4008 DMA registration and IRQ dispatching
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  Based on the code from Nicolas Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <asm/dma-mapping.h>
-#include <mach/clock.h>
-
-static struct dma_channel {
-	char *name;
-	void (*irq_handler) (int, int, void *);
-	void *data;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	void *target_addr;
-	int target_id;
-} dma_channels[MAX_DMA_CHANNELS];
-
-static struct ll_pool {
-	void *vaddr;
-	void *cur;
-	dma_addr_t dma_addr;
-	int count;
-} ll_pool;
-
-static DEFINE_SPINLOCK(ll_lock);
-
-struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
-{
-	struct pnx4008_dma_ll *ll = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ll_lock, flags);
-	if (ll_pool.count > 4) { /* can give one more */
-		ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
-		*ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
-		*(void **)ll_pool.cur = **(void ***)ll_pool.cur;
-		memset(ll, 0, sizeof(*ll));
-		ll_pool.count--;
-	}
-	spin_unlock_irqrestore(&ll_lock, flags);
-
-	return ll;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
-
-void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
-{
-	unsigned long flags;
-
-	if (ll) {
-		if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
-			printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
-			BUG();
-		}
-
-		if (ll->flags & DMA_BUFFER_ALLOCATED)
-			ll->free(ll->alloc_data);
-
-		spin_lock_irqsave(&ll_lock, flags);
-		*(long *)ll = *(long *)ll_pool.cur;
-		*(long *)ll_pool.cur = (long)ll;
-		ll_pool.count++;
-		spin_unlock_irqrestore(&ll_lock, flags);
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
-
-void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
-{
-	struct pnx4008_dma_ll *ptr;
-	u32 dma;
-
-	while (ll) {
-		dma = ll->next_dma;
-		ptr = ll->next;
-		pnx4008_free_ll_entry(ll, ll_dma);
-
-		ll_dma = dma;
-		ll = ptr;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll);
-
-static int dma_channels_requested = 0;
-
-static inline void dma_increment_usage(void)
-{
-	if (!dma_channels_requested++) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 1);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 1);
-	}
-}
-static inline void dma_decrement_usage(void)
-{
-	if (!--dma_channels_requested) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 0);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 0);
-
-	}
-}
-
-static DEFINE_SPINLOCK(dma_lock);
-
-static inline void pnx4008_dma_lock(void)
-{
-	spin_lock_irq(&dma_lock);
-}
-
-static inline void pnx4008_dma_unlock(void)
-{
-	spin_unlock_irq(&dma_lock);
-}
-
-#define VALID_CHANNEL(c)	(((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
-
-int pnx4008_request_channel(char *name, int ch,
-			    void (*irq_handler) (int, int, void *), void *data)
-{
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-
-	/* try grabbing a DMA channel with the requested priority */
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		if (!dma_channels[i].name && (ch == -1 || ch == i)) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		dma_increment_usage();
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-		dma_channels[i].ll = NULL;
-		dma_channels[i].ll_dma = 0;
-	} else {
-		printk(KERN_WARNING "No more available DMA channels for %s\n",
-		       name);
-		i = -ENODEV;
-	}
-
-	pnx4008_dma_unlock();
-	return i;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_request_channel);
-
-void pnx4008_free_channel(int ch)
-{
-	if (!dma_channels[ch].name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, ch);
-		return;
-	}
-
-	pnx4008_dma_lock();
-	pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
-	dma_channels[ch].ll = NULL;
-	dma_decrement_usage();
-
-	dma_channels[ch].name = NULL;
-	pnx4008_dma_unlock();
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_channel);
-
-int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
-{
-	unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
-
-	switch (ahb_m1_be) {
-	case 0:
-		dma_cfg &= ~(1 << 1);
-		break;
-	case 1:
-		dma_cfg |= (1 << 1);
-		break;
-	default:
-		break;
-	}
-
-	switch (ahb_m2_be) {
-	case 0:
-		dma_cfg &= ~(1 << 2);
-		break;
-	case 1:
-		dma_cfg |= (1 << 2);
-		break;
-	default:
-		break;
-	}
-
-	switch (enable) {
-	case 0:
-		dma_cfg &= ~(1 << 0);
-		break;
-	case 1:
-		dma_cfg |= (1 << 0);
-		break;
-	default:
-		break;
-	}
-
-	pnx4008_dma_lock();
-	__raw_writel(dma_cfg, DMAC_CONFIG);
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_dma);
-
-int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
-			     unsigned long *ctrl)
-{
-	int i = 0, dbsize, sbsize, err = 0;
-
-	if (!ctrl || !ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*ctrl = 0;
-
-	switch (ch_ctrl->tc_mask) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 31);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-
-	switch (ch_ctrl->cacheable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 30);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->bufferable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 29);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->priv_mode) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 28);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->di) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 27);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->si) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 26);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dest_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 25);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->src_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 24);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dwidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 21);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (1 << 21);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (2 << 21);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->swidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 18);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (1 << 18);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (2 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	dbsize = ch_ctrl->dbsize;
-	while (!(dbsize & 1)) {
-		i++;
-		dbsize >>= 1;
-	}
-	if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 15);
-	*ctrl |= (i << 15);
-
-	sbsize = ch_ctrl->sbsize;
-	while (!(sbsize & 1)) {
-		i++;
-		sbsize >>= 1;
-	}
-	if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 12);
-	*ctrl |= (i << 12);
-
-	if (ch_ctrl->tr_size > 0x7ff) {
-		err = -E2BIG;
-		goto out;
-	}
-	*ctrl &= ~0x7ff;
-	*ctrl |= ch_ctrl->tr_size & 0x7ff;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
-
-int pnx4008_dma_parse_control(unsigned long ctrl,
-			      struct pnx4008_dma_ch_ctrl * ch_ctrl)
-{
-	int err = 0;
-
-	if (!ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	ch_ctrl->tr_size = ctrl & 0x7ff;
-	ctrl >>= 12;
-
-	ch_ctrl->sbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->sbsize > 1)
-		ch_ctrl->sbsize <<= 1;
-	ctrl >>= 3;
-
-	ch_ctrl->dbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->dbsize > 1)
-		ch_ctrl->dbsize <<= 1;
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->swidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->swidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->swidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->dwidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->dwidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->dwidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	ch_ctrl->src_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->dest_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->si = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->di = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->priv_mode = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->bufferable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->cacheable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->tc_mask = ctrl & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
-
-int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
-			    unsigned long *cfg)
-{
-	int err = 0;
-
-	if (!cfg || !ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*cfg = 0;
-
-	switch (ch_cfg->halt) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->active) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 17);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->lock) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 16);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->itc) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 15);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->ie) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 14);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->flow_cntrl) {
-	case FC_MEM2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		break;
-	case FC_MEM2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (1 << 11);
-		break;
-	case FC_PER2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (2 << 11);
-		break;
-	case FC_PER2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (3 << 11);
-		break;
-	case FC_PER2PER_DPER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (4 << 11);
-		break;
-	case FC_MEM2PER_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (5 << 11);
-		break;
-	case FC_PER2MEM_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (6 << 11);
-		break;
-	case FC_PER2PER_SPER:
-		*cfg |= (7 << 11);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	*cfg &= ~(0x1f << 6);
-	*cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
-
-	*cfg &= ~(0x1f << 1);
-	*cfg |= ((ch_cfg->src_per & 0x1f) << 1);
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
-
-int pnx4008_dma_parse_config(unsigned long cfg,
-			     struct pnx4008_dma_ch_config * ch_cfg)
-{
-	int err = 0;
-
-	if (!ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	cfg >>= 1;
-
-	ch_cfg->src_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	ch_cfg->dest_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	switch (cfg & 7) {
-	case 0:
-		ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
-		break;
-	case 1:
-		ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
-		break;
-	case 2:
-		ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
-		break;
-	case 3:
-		ch_cfg->flow_cntrl = FC_PER2PER_DMA;
-		break;
-	case 4:
-		ch_cfg->flow_cntrl = FC_PER2PER_DPER;
-		break;
-	case 5:
-		ch_cfg->flow_cntrl = FC_MEM2PER_PER;
-		break;
-	case 6:
-		ch_cfg->flow_cntrl = FC_PER2MEM_PER;
-		break;
-	case 7:
-		ch_cfg->flow_cntrl = FC_PER2PER_SPER;
-	}
-	cfg >>= 3;
-
-	ch_cfg->ie = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->itc = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->lock = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->active = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->halt = cfg & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
-
-void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
-				  struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		config->ch_ctrl &= ~0x7ff;
-		config->ch_ctrl |= new_len;
-		if (!config->is_ll) {
-			config->is_ll = 1;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = config->ll;
-			unsigned long ll_dma_old = config->ll_dma;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		config->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
-
-void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
-				struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		cur_ll->ch_ctrl &= ~0x7ff;
-		cur_ll->ch_ctrl |= new_len;
-		if (!cur_ll->next) {
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = cur_ll->next;
-			unsigned long ll_dma_old = cur_ll->next_dma;
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		cur_ll->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
-
-int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	__raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
-	__raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
-
-	if (config->is_ll)
-		__raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
-	else
-		__raw_writel(0, DMAC_Cx_LLI(ch));
-
-	__raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
-	__raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_channel);
-
-int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
-
-	config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
-	config->is_ll = config->ll_dma ? 1 : 0;
-
-	config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
-	config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
-
-int pnx4008_dma_ch_enable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg |= 1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
-
-int pnx4008_dma_ch_disable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg &= ~1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
-
-int pnx4008_dma_ch_enabled(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return ch_cfg & 1;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i;
-	unsigned long dint = __raw_readl(DMAC_INT_STAT);
-	unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
-	unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
-	unsigned long i_bit;
-
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		i_bit = 1 << i;
-		if (dint & i_bit) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			if (channel->name && channel->irq_handler) {
-				int cause = 0;
-
-				if (eint & i_bit)
-					cause |= DMA_ERR_INT;
-				if (tcint & i_bit)
-					cause |= DMA_TC_INT;
-				channel->irq_handler(i, cause, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-			if (tcint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_TC_CLEAR);
-			if (eint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init pnx4008_dma_init(void)
-{
-	int ret, i;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		goto out;
-	}
-
-	ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
-	ll_pool.cur = ll_pool.vaddr =
-	    dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
-			       &ll_pool.dma_addr, GFP_KERNEL);
-
-	if (!ll_pool.vaddr) {
-		ret = -ENOMEM;
-		free_irq(DMA_INT, NULL);
-		goto out;
-	}
-
-	for (i = 0; i < ll_pool.count - 1; i++) {
-		void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
-		*addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
-	}
-	*(long *)(ll_pool.vaddr +
-		  (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
-	    (long)ll_pool.vaddr;
-
-	__raw_writel(1, DMAC_CONFIG);
-
-out:
-	return ret;
-}
-arch_initcall(pnx4008_dma_init);
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
deleted file mode 100644
index d3e71d3847b4..000000000000
--- a/arch/arm/mach-pnx4008/gpio.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/gpio.c
- *
- * PNX4008 GPIO driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/gpio-pnx4008.h>
-
-/* register definitions */
-#define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
-
-#define PIO_INP_STATE	(0x00U)
-#define PIO_OUTP_SET	(0x04U)
-#define PIO_OUTP_CLR	(0x08U)
-#define PIO_OUTP_STATE	(0x0CU)
-#define PIO_DRV_SET	(0x10U)
-#define PIO_DRV_CLR	(0x14U)
-#define PIO_DRV_STATE	(0x18U)
-#define PIO_SDINP_STATE	(0x1CU)
-#define PIO_SDOUTP_SET	(0x20U)
-#define PIO_SDOUTP_CLR	(0x24U)
-#define PIO_MUX_SET	(0x28U)
-#define PIO_MUX_CLR	(0x2CU)
-#define PIO_MUX_STATE	(0x30U)
-
-static inline void gpio_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void gpio_unlock(void)
-{
-	local_irq_enable();
-}
-
-/* Inline functions */
-static inline int gpio_read_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		ret = (val & bit) ? 1 : 0;
-	}
-out:
-	return ret;
-}
-
-static inline int gpio_set_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		val |= bit;
-		__raw_writel(val, PIO_VA_BASE + reg);
-		ret = 0;
-	}
-out:
-	return ret;
-}
-
-/* Very simple access control, bitmap for allocated/free */
-static unsigned long access_map[4];
-#define INP_INDEX	0
-#define OUTP_INDEX	1
-#define GPIO_INDEX	2
-#define MUX_INDEX	3
-
-/*GPIO to Input Mapping */
-static short gpio_to_inp_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, 10, 11, 12, 13, 14, 24, -1
-};
-
-/*GPIO to Mux Mapping */
-static short gpio_to_mux_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, 0, 1, 4, 5, -1
-};
-
-/*Output to Mux Mapping */
-static short outp_to_mux_map[32] = {
-	-1, -1, -1, 6, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, 2, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1
-};
-
-int pnx4008_gpio_register_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EBUSY;	/* Already in use */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISRAM(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISMUX(pin)) {
-		if (access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] |= bit;
-
-	} else if (GPIO_ISOUT(pin)) {
-		if (access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] |= bit;
-
-	} else if (GPIO_ISIN(pin)) {
-		if (access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] |= bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_register_pin);
-
-int pnx4008_gpio_unregister_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EFAULT;	/* Not registered */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISRAM(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISMUX(pin)) {
-		if (~access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] &= ~bit;
-	} else if (GPIO_ISOUT(pin)) {
-		if (~access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] &= ~bit;
-	} else if (GPIO_ISIN(pin)) {
-		if (~access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] &= ~bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
-
-unsigned long pnx4008_gpio_read_pin(unsigned short pin)
-{
-	unsigned long ret = -EFAULT;
-	int gpio = GPIO_BIT_MASK(pin);
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
-			ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
-		}
-	} else if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-		if (ret > 0)
-			ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-		else if (ret == 0)
-			ret =
-			    gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
-	} else if (GPIO_ISIN(pin)) {
-		ret = gpio_read_bit(PIO_INP_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin);
-
-/* Write Value to output */
-int pnx4008_gpio_write_pin(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		printk( "writing '%x' to '%x'\n",
-				gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
-		ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
-					   PIO_SDOUTP_CLR, gpio);
-	} else if (GPIO_ISBID(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_OUTP_SET :
-					   PIO_OUTP_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_write_pin);
-
-/* Value = 1 : Set GPIO pin as output */
-/* Value = 0 : Set GPIO pin as input */
-int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
-
-/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
-int pnx4008_gpio_read_pin_direction(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
-
-/* Value = 1 : Set pin to muxed function  */
-/* Value = 0 : Set pin as GPIO */
-int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
-
-/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
-int pnx4008_gpio_read_pin_mux(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
deleted file mode 100644
index 550cfc2a1f2e..000000000000
--- a/arch/arm/mach-pnx4008/i2c.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@gmail.com>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-static struct resource i2c0_resources[] = {
-	{
-		.start = PNX4008_I2C1_BASE,
-		.end = PNX4008_I2C1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_1_INT,
-		.end = I2C_1_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	{
-		.start = PNX4008_I2C2_BASE,
-		.end = PNX4008_I2C2_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_2_INT,
-		.end = I2C_2_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	{
-		.start = PNX4008_USB_CONFIG_BASE + 0x300,
-		.end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_I2C_INT,
-		.end = USB_I2C_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name = "pnx-i2c.0",
-	.id = 0,
-	.resource = i2c0_resources,
-	.num_resources = ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name = "pnx-i2c.1",
-	.id = 1,
-	.resource = i2c1_resources,
-	.num_resources = ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
-	.name = "pnx-i2c.2",
-	.id = 2,
-	.resource = i2c2_resources,
-	.num_resources = ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
deleted file mode 100644
index 8d2a5ef52c90..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
deleted file mode 100644
index 469d60d97f5c..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00090000
-		add	\rv, \rp, #0xf4000000	@ virtual
-		add	\rp, \rp, #0x40000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
deleted file mode 100644
index f094bf8bfb18..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/dma.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
deleted file mode 100644
index 77a555846719..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
deleted file mode 100644
index 41027dd7cf74..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
deleted file mode 100644
index 7b98b828d368..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
deleted file mode 100644
index 2a690ca33870..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
deleted file mode 100644
index f6b33cf23ae2..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
deleted file mode 100644
index 368c2c10a308..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
deleted file mode 100644
index 2fa685bff858..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
deleted file mode 100644
index b383c7de7ab4..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
deleted file mode 100644
index bb4751ee2539..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
deleted file mode 100644
index 41e4201972d5..000000000000
--- a/arch/arm/mach-pnx4008/irq.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/irq.c
- *
- * PNX4008 IRQ controller driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irq.h>
-
-static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
-
-static void pnx4008_mask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-}
-
-static void pnx4008_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq));	/* unmask interrupt */
-}
-
-static void pnx4008_mask_ack_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-	__raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq));	/* clear interrupt status */
-}
-
-static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/*rising edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*falling edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*low level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/* high level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-
-	/* IRQ_TYPE_EDGE_BOTH is not supported */
-	default:
-		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
-		return -1;
-	}
-	return 0;
-}
-
-static struct irq_chip pnx4008_irq_chip = {
-	.irq_ack = pnx4008_mask_ack_irq,
-	.irq_mask = pnx4008_mask_irq,
-	.irq_unmask = pnx4008_unmask_irq,
-	.irq_set_type = pnx4008_set_irq_type,
-};
-
-void __init pnx4008_init_irq(void)
-{
-	unsigned int i;
-
-	/* configure IRQ's */
-	for (i = 0; i < NR_IRQS; i++) {
-		set_irq_flags(i, IRQF_VALID);
-		irq_set_chip(i, &pnx4008_irq_chip);
-		pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]);
-	}
-
-	/* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N),
-			     pnx4008_irq_type[SUB1_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N),
-			     pnx4008_irq_type[SUB2_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N),
-			     pnx4008_irq_type[SUB1_FIQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N),
-			     pnx4008_irq_type[SUB2_FIQ_N]);
-
-	/* mask all others */
-	__raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
-			(1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
-		INTC_ER(MAIN_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC1_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC2_BASE_INT));
-}
-
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
deleted file mode 100644
index 26f8d06b142a..000000000000
--- a/arch/arm/mach-pnx4008/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/pm.c
- *
- * Power Management driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pm.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/suspend.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-#include <mach/clock.h>
-
-#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
-
-static void *saved_sram;
-
-static struct clk *pll4_clk;
-
-static inline void pnx4008_standby(void)
-{
-	void (*pnx4008_cpu_standby_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
-
-	/*do suspend */
-	pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_standby_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static inline void pnx4008_suspend(void)
-{
-	void (*pnx4008_cpu_suspend_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
-
-	/*do suspend */
-	pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_suspend_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int pnx4008_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pnx4008_standby();
-		break;
-	case PM_SUSPEND_MEM:
-		pnx4008_suspend();
-		break;
-	}
-	return 0;
-}
-
-static int pnx4008_pm_valid(suspend_state_t state)
-{
-	return (state == PM_SUSPEND_STANDBY) ||
-	       (state == PM_SUSPEND_MEM);
-}
-
-static const struct platform_suspend_ops pnx4008_pm_ops = {
-	.enter = pnx4008_pm_enter,
-	.valid = pnx4008_pm_valid,
-};
-
-int __init pnx4008_pm_init(void)
-{
-	u32 sram_size_to_allocate;
-
-	pll4_clk = clk_get(0, "ck_pll4");
-	if (IS_ERR(pll4_clk)) {
-		printk(KERN_ERR
-		       "PM Suspend cannot acquire ARM(PLL4) clock control\n");
-		return PTR_ERR(pll4_clk);
-	}
-
-	if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
-		sram_size_to_allocate = pnx4008_cpu_standby_sz;
-	else
-		sram_size_to_allocate = pnx4008_cpu_suspend_sz;
-
-	saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
-	if (!saved_sram) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion of SRAM\n");
-		clk_put(pll4_clk);
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&pnx4008_pm_ops);
-	return 0;
-}
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
deleted file mode 100644
index 374c138ac1ac..000000000000
--- a/arch/arm/mach-pnx4008/serial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/serial.c
- *
- *  PNX4008 UART initialization
- *
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <mach/gpio-pnx4008.h>
-#include <mach/clock.h>
-
-#define UART_3		0
-#define UART_4		1
-#define UART_5		2
-#define UART_6		3
-#define UART_UNKNOWN	(-1)
-
-#define UART3_BASE_VA	IO_ADDRESS(PNX4008_UART3_BASE)
-#define UART4_BASE_VA	IO_ADDRESS(PNX4008_UART4_BASE)
-#define UART5_BASE_VA	IO_ADDRESS(PNX4008_UART5_BASE)
-#define UART6_BASE_VA	IO_ADDRESS(PNX4008_UART6_BASE)
-
-#define UART_FCR_OFFSET		8
-#define UART_FIFO_SIZE		64
-
-void pnx4008_uart_init(void)
-{
-	u32 tmp;
-	int i = UART_FIFO_SIZE;
-
-	__raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* Send a NULL to fix the UART HW bug */
-	__raw_writel(0x00, UART5_BASE_VA);
-	__raw_writel(0x00, UART3_BASE_VA);
-
-	while (i--) {
-		tmp = __raw_readl(UART5_BASE_VA);
-		tmp = __raw_readl(UART3_BASE_VA);
-	}
-	__raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* setup wakeup interrupt */
-	start_int_set_rising_edge(SE_U3_RX_INT);
-	start_int_ack(SE_U3_RX_INT);
-	start_int_umask(SE_U3_RX_INT);
-
-	start_int_set_rising_edge(SE_U5_RX_INT);
-	start_int_ack(SE_U5_RX_INT);
-	start_int_umask(SE_U5_RX_INT);
-}
-
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
deleted file mode 100644
index f4eed495d295..000000000000
--- a/arch/arm/mach-pnx4008/sleep.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/sleep.S
- *
- * PNX4008 support for STOP mode and SDRAM self-refresh
- *
- * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define PWR_CTRL_REG_OFFS 0x44
-
-#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
-#define MPMC_STATUS_REG_OFFS 0x4
-
-		.text
-
-ENTRY(pnx4008_cpu_suspend)
-	@this function should be entered in Direct run mode.
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ to prepare SDRAM to get out of self-refresh mode after wakeup
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do enter stop mode
-	orr	r5, r5, #(1 << 0)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	@ sleeping now...
-
-	@ coming out of STOP mode into Direct Run mode
-	@ clear STOP mode and SDRAM self-refresh bits
-	str	r1, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_suspend_sz)
-	.word	. - pnx4008_cpu_suspend
-
-ENTRY(pnx4008_cpu_standby)
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ set 'get out of self-refresh mode after wakeup' bit
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	mcr     p15, 0, r0, c7, c0, 4	@ kinda sleeping now...
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_standby_sz)
-	.word	. - pnx4008_cpu_standby
-
-ENTRY(pnx4008_cache_clean_invalidate)
-	stmfd	sp!, {r0 - r6, lr}
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test,clean,invalidate
-	bne     1b
-#endif
-	ldmfd   sp!, {r0 - r6, pc}
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
deleted file mode 100644
index 0cfe8af3d3be..000000000000
--- a/arch/arm/mach-pnx4008/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/time.c
- *
- * PNX4008 Timers
- *
- * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach/time.h>
-#include <asm/errno.h>
-
-#include "time.h"
-
-/*! Note: all timers are UPCOUNTING */
-
-/*!
- * Returns number of us since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long pnx4008_gettimeoffset(void)
-{
-	u32 ticks_to_match =
-	    __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
-	u32 elapsed = LATCH - ticks_to_match;
-	return (elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*!
- * IRQ handler for the timer
- */
-static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
-{
-	if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
-
-		do {
-			timer_tick();
-
-			/*
-			 * this algorithm takes care of possible delay
-			 * for this interrupt handling longer than a normal
-			 * timer period
-			 */
-			__raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
-				     HSTIM_MATCH0);
-			__raw_writel(MATCH0_INT, HSTIM_INT);	/* clear interrupt */
-
-			/*
-			 * The goal is to keep incrementing HSTIM_MATCH0
-			 * register until HSTIM_MATCH0 indicates time after
-			 * what HSTIM_COUNTER indicates.
-			 */
-		} while ((signed)
-			 (__raw_readl(HSTIM_MATCH0) -
-			  __raw_readl(HSTIM_COUNTER)) < 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pnx4008_timer_irq = {
-	.name = "PNX4008 Tick Timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = pnx4008_timer_interrupt
-};
-
-/*!
- * Set up timer and timer interrupt.
- */
-static __init void pnx4008_setup_timer(void)
-{
-	__raw_writel(RESET_COUNT, MSTIM_CTRL);
-	while (__raw_readl(MSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, MSTIM_CTRL);	/* stop the timer */
-	__raw_writel(0, MSTIM_MCTRL);
-
-	__raw_writel(RESET_COUNT, HSTIM_CTRL);
-	while (__raw_readl(HSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, HSTIM_CTRL);
-	__raw_writel(0, HSTIM_MCTRL);
-	__raw_writel(0, HSTIM_CCR);
-	__raw_writel(12, HSTIM_PMATCH);	/* scale down to 1 MHZ */
-	__raw_writel(LATCH, HSTIM_MATCH0);
-	__raw_writel(MR0_INT, HSTIM_MCTRL);
-
-	setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
-
-	__raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL);	/*start timer, stop when JTAG active */
-}
-
-/* Timer Clock Control in PM register */
-#define TIMCLK_CTRL_REG  IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
-#define WATCHDOG_CLK_EN                   1
-#define TIMER_CLK_EN                      2	/* HS and MS timers? */
-
-static u32 timclk_ctrl_reg_save;
-
-void pnx4008_timer_suspend(void)
-{
-	timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
-	__raw_writel(0, TIMCLK_CTRL_REG);	/* disable timers */
-}
-
-void pnx4008_timer_resume(void)
-{
-	__raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG);	/* enable timers */
-}
-
-struct sys_timer pnx4008_timer = {
-	.init = pnx4008_setup_timer,
-	.offset = pnx4008_gettimeoffset,
-	.suspend = pnx4008_timer_suspend,
-	.resume = pnx4008_timer_resume,
-};
-
diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h
deleted file mode 100644
index 75e88c570aa7..000000000000
--- a/arch/arm/mach-pnx4008/time.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef PNX_TIME_H
-#define PNX_TIME_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
new file mode 100644
index 000000000000..41fc85327673
--- /dev/null
+++ b/arch/arm/mach-prima2/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_SIRF
+
+menu "CSR SiRF primaII/Marco/Polo Specific Features"
+
+config ARCH_PRIMA2
+	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
+	default y
+	select CPU_V7
+	select ZONE_DMA
+	select SIRF_IRQ
+	help
+          Support for CSR SiRFSoC ARM Cortex A9 Platform
+
+endmenu
+
+config SIRF_IRQ
+	bool
+
+endif
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index 13dd1604d951..fc9ce22e2b5a 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -1,9 +1,8 @@
 obj-y := timer.o
-obj-y += irq.o
-obj-y += clock.o
 obj-y += rstc.o
-obj-y += prima2.o
+obj-y += common.o
 obj-y += rtciobrg.o
 obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_CACHE_L2X0) += l2x0.o
 obj-$(CONFIG_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_SIRF_IRQ) += irq.o
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
deleted file mode 100644
index aebad7e565cf..000000000000
--- a/arch/arm/mach-prima2/clock.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * Clock tree for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <asm/mach/map.h>
-#include <mach/map.h>
-
-#define SIRFSOC_CLKC_CLK_EN0    0x0000
-#define SIRFSOC_CLKC_CLK_EN1    0x0004
-#define SIRFSOC_CLKC_REF_CFG    0x0014
-#define SIRFSOC_CLKC_CPU_CFG    0x0018
-#define SIRFSOC_CLKC_MEM_CFG    0x001c
-#define SIRFSOC_CLKC_SYS_CFG    0x0020
-#define SIRFSOC_CLKC_IO_CFG     0x0024
-#define SIRFSOC_CLKC_DSP_CFG    0x0028
-#define SIRFSOC_CLKC_GFX_CFG    0x002c
-#define SIRFSOC_CLKC_MM_CFG     0x0030
-#define SIRFSOC_LKC_LCD_CFG     0x0034
-#define SIRFSOC_CLKC_MMC_CFG    0x0038
-#define SIRFSOC_CLKC_PLL1_CFG0  0x0040
-#define SIRFSOC_CLKC_PLL2_CFG0  0x0044
-#define SIRFSOC_CLKC_PLL3_CFG0  0x0048
-#define SIRFSOC_CLKC_PLL1_CFG1  0x004c
-#define SIRFSOC_CLKC_PLL2_CFG1  0x0050
-#define SIRFSOC_CLKC_PLL3_CFG1  0x0054
-#define SIRFSOC_CLKC_PLL1_CFG2  0x0058
-#define SIRFSOC_CLKC_PLL2_CFG2  0x005c
-#define SIRFSOC_CLKC_PLL3_CFG2  0x0060
-
-#define SIRFSOC_CLOCK_VA_BASE		SIRFSOC_VA(0x005000)
-
-#define KHZ     1000
-#define MHZ     (KHZ * KHZ)
-
-struct clk_ops {
-	unsigned long (*get_rate)(struct clk *clk);
-	long (*round_rate)(struct clk *clk, unsigned long rate);
-	int (*set_rate)(struct clk *clk, unsigned long rate);
-	int (*enable)(struct clk *clk);
-	int (*disable)(struct clk *clk);
-	struct clk *(*get_parent)(struct clk *clk);
-	int (*set_parent)(struct clk *clk, struct clk *parent);
-};
-
-struct clk {
-	struct clk *parent;     /* parent clk */
-	unsigned long rate;     /* clock rate in Hz */
-	signed char usage;      /* clock enable count */
-	signed char enable_bit; /* enable bit: 0 ~ 63 */
-	unsigned short regofs;  /* register offset */
-	struct clk_ops *ops;    /* clock operation */
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static inline unsigned long clkc_readl(unsigned reg)
-{
-	return readl(SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-static inline void clkc_writel(u32 val, unsigned reg)
-{
-	writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-/*
- * osc_rtc - real time oscillator - 32.768KHz
- * osc_sys - high speed oscillator - 26MHz
- */
-
-static struct clk clk_rtc = {
-	.rate = 32768,
-};
-
-static struct clk clk_osc = {
-	.rate = 26 * MHZ,
-};
-
-/*
- * std pll
- */
-static unsigned long std_pll_get_rate(struct clk *clk)
-{
-	unsigned long fin = clk_get_rate(clk->parent);
-	u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
-		SIRFSOC_CLKC_PLL1_CFG0;
-
-	if (clkc_readl(regcfg2) & BIT(2)) {
-		/* pll bypass mode */
-		clk->rate = fin;
-	} else {
-		/* fout = fin * nf / nr / od */
-		u32 cfg0 = clkc_readl(clk->regofs);
-		u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
-		u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
-		u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
-		WARN_ON(fin % MHZ);
-		clk->rate = fin / MHZ * nf / nr / od * MHZ;
-	}
-
-	return clk->rate;
-}
-
-static int std_pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long fin, nf, nr, od, reg;
-
-	/*
-	 * fout = fin * nf / (nr * od);
-	 * set od = 1, nr = fin/MHz, so fout = nf * MHz
-	 */
-
-	nf = rate / MHZ;
-	if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
-		return -EINVAL;
-
-	fin = clk_get_rate(clk->parent);
-	BUG_ON(fin < MHZ);
-
-	nr = fin / MHZ;
-	BUG_ON((fin % MHZ) || nr > BIT(6));
-
-	od = 1;
-
-	reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
-	clkc_writel(reg, clk->regofs);
-
-	reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
-	clkc_writel((nf >> 1) - 1, reg);
-
-	reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
-	while (!(clkc_readl(reg) & BIT(6)))
-		cpu_relax();
-
-	clk->rate = 0; /* set to zero will force recalculation */
-	return 0;
-}
-
-static struct clk_ops std_pll_ops = {
-	.get_rate = std_pll_get_rate,
-	.set_rate = std_pll_set_rate,
-};
-
-static struct clk clk_pll1 = {
-	.parent = &clk_osc,
-	.regofs = SIRFSOC_CLKC_PLL1_CFG0,
-	.ops = &std_pll_ops,
-};
-
-static struct clk clk_pll2 = {
-	.parent = &clk_osc,
-	.regofs = SIRFSOC_CLKC_PLL2_CFG0,
-	.ops = &std_pll_ops,
-};
-
-static struct clk clk_pll3 = {
-	.parent = &clk_osc,
-	.regofs = SIRFSOC_CLKC_PLL3_CFG0,
-	.ops = &std_pll_ops,
-};
-
-/*
- * clock domains - cpu, mem, sys/io
- */
-
-static struct clk clk_mem;
-
-static struct clk *dmn_get_parent(struct clk *clk)
-{
-	struct clk *clks[] = {
-		&clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
-	};
-	u32 cfg = clkc_readl(clk->regofs);
-	WARN_ON((cfg & (BIT(3) - 1)) > 4);
-	return clks[cfg & (BIT(3) - 1)];
-}
-
-static int dmn_set_parent(struct clk *clk, struct clk *parent)
-{
-	const struct clk *clks[] = {
-		&clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
-	};
-	u32 cfg = clkc_readl(clk->regofs);
-	int i;
-	for (i = 0; i < ARRAY_SIZE(clks); i++) {
-		if (clks[i] == parent) {
-			cfg &= ~(BIT(3) - 1);
-			clkc_writel(cfg | i, clk->regofs);
-			/* BIT(3) - switching status: 1 - busy, 0 - done */
-			while (clkc_readl(clk->regofs) & BIT(3))
-				cpu_relax();
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static unsigned long dmn_get_rate(struct clk *clk)
-{
-	unsigned long fin = clk_get_rate(clk->parent);
-	u32 cfg = clkc_readl(clk->regofs);
-	if (cfg & BIT(24)) {
-		/* fcd bypass mode */
-		clk->rate = fin;
-	} else {
-		/*
-		 * wait count: bit[19:16], hold count: bit[23:20]
-		 */
-		u32 wait = (cfg >> 16) & (BIT(4) - 1);
-		u32 hold = (cfg >> 20) & (BIT(4) - 1);
-
-		clk->rate = fin / (wait + hold + 2);
-	}
-
-	return clk->rate;
-}
-
-static int dmn_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long fin;
-	unsigned ratio, wait, hold, reg;
-	unsigned bits = (clk == &clk_mem) ? 3 : 4;
-
-	fin = clk_get_rate(clk->parent);
-	ratio = fin / rate;
-
-	if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
-		return -EINVAL;
-
-	WARN_ON(fin % rate);
-
-	wait = (ratio >> 1) - 1;
-	hold = ratio - wait - 2;
-
-	reg = clkc_readl(clk->regofs);
-	reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
-	reg |= (wait << 16) | (hold << 20) | BIT(25);
-	clkc_writel(reg, clk->regofs);
-
-	/* waiting FCD been effective */
-	while (clkc_readl(clk->regofs) & BIT(25))
-		cpu_relax();
-
-	clk->rate = 0; /* set to zero will force recalculation */
-
-	return 0;
-}
-
-/*
- * cpu clock has no FCD register in Prima2, can only change pll
- */
-static int cpu_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret1, ret2;
-	struct clk *cur_parent, *tmp_parent;
-
-	cur_parent = dmn_get_parent(clk);
-	BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
-
-	/* switch to tmp pll before setting parent clock's rate */
-	tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
-	ret1 = dmn_set_parent(clk, tmp_parent);
-	BUG_ON(ret1);
-
-	ret2 = clk_set_rate(cur_parent, rate);
-
-	ret1 = dmn_set_parent(clk, cur_parent);
-
-	clk->rate = 0; /* set to zero will force recalculation */
-
-	return ret2 ? ret2 : ret1;
-}
-
-static struct clk_ops cpu_ops = {
-	.get_parent = dmn_get_parent,
-	.set_parent = dmn_set_parent,
-	.set_rate = cpu_set_rate,
-};
-
-static struct clk clk_cpu = {
-	.parent = &clk_pll1,
-	.regofs = SIRFSOC_CLKC_CPU_CFG,
-	.ops = &cpu_ops,
-};
-
-
-static struct clk_ops msi_ops = {
-	.set_rate = dmn_set_rate,
-	.get_rate = dmn_get_rate,
-	.set_parent = dmn_set_parent,
-	.get_parent = dmn_get_parent,
-};
-
-static struct clk clk_mem = {
-	.parent = &clk_pll2,
-	.regofs = SIRFSOC_CLKC_MEM_CFG,
-	.ops = &msi_ops,
-};
-
-static struct clk clk_sys = {
-	.parent = &clk_pll3,
-	.regofs = SIRFSOC_CLKC_SYS_CFG,
-	.ops = &msi_ops,
-};
-
-static struct clk clk_io = {
-	.parent = &clk_pll3,
-	.regofs = SIRFSOC_CLKC_IO_CFG,
-	.ops = &msi_ops,
-};
-
-/*
- * on-chip clock sets
- */
-static struct clk_lookup onchip_clks[] = {
-	{
-		.dev_id = "rtc",
-		.clk = &clk_rtc,
-	}, {
-		.dev_id = "osc",
-		.clk = &clk_osc,
-	}, {
-		.dev_id = "pll1",
-		.clk = &clk_pll1,
-	}, {
-		.dev_id = "pll2",
-		.clk = &clk_pll2,
-	}, {
-		.dev_id = "pll3",
-		.clk = &clk_pll3,
-	}, {
-		.dev_id = "cpu",
-		.clk = &clk_cpu,
-	}, {
-		.dev_id = "mem",
-		.clk = &clk_mem,
-	}, {
-		.dev_id = "sys",
-		.clk = &clk_sys,
-	}, {
-		.dev_id = "io",
-		.clk = &clk_io,
-	},
-};
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return -EINVAL;
-
-	if (clk->parent)
-		clk_enable(clk->parent);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (!clk->usage++ && clk->ops && clk->ops->enable)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return;
-
-	WARN_ON(!clk->usage);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->usage == 0 && clk->ops && clk->ops->disable)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	if (clk->parent)
-		clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return 0;
-
-	if (clk->rate)
-		return clk->rate;
-
-	if (clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return 0;
-
-	if (clk->ops && clk->ops->round_rate)
-		return clk->ops->round_rate(clk, rate);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return -EINVAL;
-
-	if (!clk->ops || !clk->ops->set_rate)
-		return -EINVAL;
-
-	return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret;
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return -EINVAL;
-
-	if (!clk->ops || !clk->ops->set_parent)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = clk->ops->set_parent(clk, parent);
-	if (!ret) {
-		parent->usage += clk->usage;
-		clk->parent->usage -= clk->usage;
-		BUG_ON(clk->parent->usage < 0);
-		clk->parent = parent;
-	}
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return NULL;
-
-	if (!clk->ops || !clk->ops->get_parent)
-		return clk->parent;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	clk->parent = clk->ops->get_parent(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static void __init sirfsoc_clk_init(void)
-{
-	clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
-}
-
-static struct of_device_id clkc_ids[] = {
-	{ .compatible = "sirf,prima2-clkc" },
-	{},
-};
-
-void __init sirfsoc_of_clk_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	struct map_desc sirfsoc_clkc_iodesc = {
-		.virtual = SIRFSOC_CLOCK_VA_BASE,
-		.type    = MT_DEVICE,
-	};
-
-	np = of_find_matching_node(NULL, clkc_ids);
-	if (!np)
-		panic("unable to find compatible clkc node in dtb\n");
-
-	if (of_address_to_resource(np, 0, &res))
-		panic("unable to find clkc range in dtb");
-	of_node_put(np);
-
-	sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
-	sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
-
-	iotable_init(&sirfsoc_clkc_iodesc, 1);
-
-	sirfsoc_clk_init();
-}
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/common.c
index 8f0429d4b79f..f25a54194639 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/common.c
@@ -30,21 +30,21 @@ void __init sirfsoc_init_late(void)
 	sirfsoc_pm_init();
 }
 
-static const char *prima2cb_dt_match[] __initdata = {
-       "sirf,prima2-cb",
+#ifdef CONFIG_ARCH_PRIMA2
+static const char *prima2_dt_match[] __initdata = {
+       "sirf,prima2",
        NULL
 };
 
-MACHINE_START(PRIMA2_EVB, "prima2cb")
+DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
-	.atag_offset	= 0x100,
-	.init_early     = sirfsoc_of_clk_init,
 	.map_io         = sirfsoc_map_lluart,
 	.init_irq	= sirfsoc_of_irq_init,
 	.timer		= &sirfsoc_timer,
 	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
 	.init_late	= sirfsoc_init_late,
-	.dt_compat      = prima2cb_dt_match,
+	.dt_compat      = prima2_dt_match,
 	.restart	= sirfsoc_restart,
 MACHINE_END
+#endif
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 83125c6a30b3..0c898fcf909c 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -25,11 +25,11 @@ static __inline__ void putc(char c)
 	 * during kernel decompression, all mappings are flat:
 	 *  virt_addr == phys_addr
 	 */
-	while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
+	while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
 		& SIRFSOC_UART1_TXFIFO_FULL)
 		barrier();
 
-	__raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
+	__raw_writel(c, (void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
 }
 
 static inline void flush(void)
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index a7b9415d30f8..7dee9176e77a 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -63,7 +63,7 @@ void __init sirfsoc_of_irq_init(void)
 
 	np = of_find_matching_node(NULL, intc_ids);
 	if (!np)
-		panic("unable to find compatible intc node in dtb\n");
+		return;
 
 	sirfsoc_intc_base = of_iomap(np, 0);
 	if (!sirfsoc_intc_base)
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index f224107de7bc..d95bf252f694 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -21,6 +21,8 @@
 #include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 
+#include "common.h"
+
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
 #define SIRFSOC_TIMER_COUNTER_HI	0x0004
 #define SIRFSOC_TIMER_MATCH_0		0x0008
@@ -188,9 +190,13 @@ static void __init sirfsoc_clockevent_init(void)
 static void __init sirfsoc_timer_init(void)
 {
 	unsigned long rate;
+	struct clk *clk;
+
+	/* initialize clocking early, we want to set the OS timer */
+	sirfsoc_of_clk_init();
 
 	/* timer's input clock is io clock */
-	struct clk *clk = clk_get_sys("io", NULL);
+	clk = clk_get_sys("io", NULL);
 
 	BUG_ON(IS_ERR(clk));
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index fe2d1f80ef50..8e6288de69b9 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -25,6 +25,18 @@ config PXA_V7_MACH_AUTO
 if !ARCH_PXA_V7
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
+config MACH_PXA3XX_DT
+	bool "Support PXA3xx platforms from device tree"
+	select PXA3xx
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select HAVE_PWM
+	select USE_OF
+	help
+	  Include support for Marvell PXA3xx based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA3XX_DT is enabled.
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
 	select PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index be0f7df8685c..ee88d6eae648 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -26,6 +26,9 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # NOTE: keep the order of boards in accordance to their order in Kconfig
 
+# Device Tree support
+obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
+
 # Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
@@ -95,12 +98,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-
-obj-$(CONFIG_LEDS)		+= $(led-y)
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index ccdac4b6a469..ffa6d811aad8 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -32,7 +32,7 @@
 
 #include <mach/pxa25x.h>
 #include <mach/gumstix.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 76c4b9494031..3dfec1ec462d 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -30,7 +30,7 @@
 
 #include <mach/gumstix.h>
 #include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 9244493dbcb7..208229342514 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -45,12 +45,12 @@
 #include <mach/pxa27x.h>
 #include <mach/balloon3.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index 2a37a9a8f621..d4e9499832dc 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -127,8 +127,10 @@ void clk_pxa3xx_cken_enable(struct clk *clk)
 
 	if (clk->cken < 32)
 		CKENA |= mask;
-	else
+	else if (clk->cken < 64)
 		CKENB |= mask;
+	else
+		CKENC |= mask;
 }
 
 void clk_pxa3xx_cken_disable(struct clk *clk)
@@ -137,8 +139,10 @@ void clk_pxa3xx_cken_disable(struct clk *clk)
 
 	if (clk->cken < 32)
 		CKENA &= ~mask;
-	else
+	else if (clk->cken < 64)
 		CKENB &= ~mask;
+	else
+		CKENC &= ~mask;
 }
 
 const struct clkops clk_pxa3xx_cken_ops = {
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 431ef56700c4..2503db9e3253 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -22,8 +22,8 @@
 #include <linux/spi/libertas_spi.h>
 
 #include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 8fa4ad27edf3..fc3afc7cd366 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,7 +24,7 @@
 #include <mach/pxa25x.h>
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/smemc.h>
 
 #include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3e4e9fe2d462..cc2b23afcaaf 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -48,12 +48,12 @@
 
 #include <mach/pxa300.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index d28e802e2448..8404b24240ea 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -23,8 +23,8 @@
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa27x-udc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 248804bb2c9d..2d4a7b4d5d78 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -27,11 +27,11 @@
 #include <asm/mach-types.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index bb6def8ec979..a9c9c163dd95 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -24,8 +24,8 @@
 
 #include <mach/pxa300.h>
 #include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/audio.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d88e7b37f1da..25515cd7e68f 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -25,8 +25,8 @@
 
 #include <mach/pxa320.h>
 #include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 68cc75fac219..8240291ab8cf 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -24,9 +24,9 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/mfp-pxa300.h>
 #include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index c1fe32db4755..7c83f52c549c 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -46,8 +46,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/corgi.h>
 #include <mach/sharpsl_pm.h>
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 67f0de37f46e..7039f44b3647 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 166eee5b8a70..ddaa04de8e22 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -6,19 +6,18 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <asm/pmu.h>
 #include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
 #include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -42,7 +41,7 @@ static struct resource pxa_resource_pmu = {
 
 struct platform_device pxa_device_pmu = {
 	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
+	.id		= -1,
 	.resource	= &pxa_resource_pmu,
 	.num_resources	= 1,
 };
@@ -384,9 +383,24 @@ struct platform_device pxa_device_asoc_platform = {
 
 static u64 pxaficp_dmamask = ~(u32)0;
 
+static struct resource pxa_ir_resources[] = {
+	[0] = {
+		.start  = IRQ_STUART,
+		.end    = IRQ_STUART,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start  = IRQ_ICP,
+		.end    = IRQ_ICP,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
 struct platform_device pxa_device_ficp = {
 	.name		= "pxa2xx-ir",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_ir_resources),
+	.resource	= pxa_ir_resources,
 	.dev		= {
 		.dma_mask = &pxaficp_dmamask,
 		.coherent_dma_mask = 0xffffffff,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 97f82ad341bf..1b6411439ec8 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -42,11 +42,11 @@
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 4cb2391a782e..be2ee9bf5c6e 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -32,9 +32,9 @@
 #include <mach/eseries-gpio.h>
 #include <mach/eseries-irq.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 15ab2533667d..dc58fa0edb66 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -29,11 +29,11 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index e529a35a44ce..60755a6bb1c6 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/gumstix.h>
 
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index e6311988add2..5ecbd17b5641 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,7 +45,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/hx4700.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
 
 #include <sound/ak4641.h>
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 6ff466bd43e8..64507cdd2e8f 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -33,9 +33,9 @@
 
 #include <mach/pxa25x.h>
 #include <mach/idp.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -191,6 +191,87 @@ static void __init idp_map_io(void)
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct idp_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} idp_leds[] = {
+	{ "idp:green", "heartbeat", },
+	{ "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct idp_led *led = container_of(cdev,
+			struct idp_led, cdev);
+	u32 reg = IDP_CPLD_LED_CONTROL;
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+
+	IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+	struct idp_led *led = container_of(cdev,
+			struct idp_led, cdev);
+
+	return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_pxa_idp())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+		struct idp_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = idp_leds[i].name;
+		led->cdev.brightness_set = idp_led_set;
+		led->cdev.brightness_get = idp_led_get;
+		led->cdev.default_trigger = idp_leds[i].trigger;
+
+		if (i == 0)
+			led->mask = IDP_HB_LED;
+		else
+			led->mask = IDP_BUSY_LED;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
+#endif
 
 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	/* Maintainer: Vibren Technologies */
diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
deleted file mode 100644
index d428be4db44c..000000000000
--- a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
-	int	cd_gpio;
-	int	rdy_gpio;
-	int	pwr_gpio;
-	void	(*reset)(int state);
-};
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
deleted file mode 100644
index 6709b1cd7c77..000000000000
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-    camera.h - PXA camera driver header file
-
-    Copyright (C) 2003, Intel Corporation
-    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER	1
-#define PXA_CAMERA_DATAWIDTH_4	2
-#define PXA_CAMERA_DATAWIDTH_5	4
-#define PXA_CAMERA_DATAWIDTH_8	8
-#define PXA_CAMERA_DATAWIDTH_9	0x10
-#define PXA_CAMERA_DATAWIDTH_10	0x20
-#define PXA_CAMERA_PCLK_EN	0x40
-#define PXA_CAMERA_MCLK_EN	0x80
-#define PXA_CAMERA_PCP		0x100
-#define PXA_CAMERA_HSP		0x200
-#define PXA_CAMERA_VSP		0x400
-
-struct pxacamera_platform_data {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
deleted file mode 100644
index 3cd41f77dda4..000000000000
--- a/arch/arm/mach-pxa/include/mach/irda.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF		1
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-
-struct pxaficp_platform_data {
-	int transceiver_cap;
-	void (*transceiver_mode)(struct device *dev, int mode);
-	int (*startup)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
-	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
deleted file mode 100644
index 9eb515bb799d..000000000000
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	unsigned long detect_delay_ms;		/* delay in millisecond before detecting cards after interrupt */
-	int (*init)(struct device *, irq_handler_t , void *);
-	int (*get_ro)(struct device *);
-	void (*setpower)(struct device *, unsigned int);
-	void (*exit)(struct device *, void *);
-	int gpio_card_detect;			/* gpio detecting card insertion */
-	int gpio_card_ro;			/* gpio detecting read only toggle */
-	bool gpio_card_ro_invert;		/* gpio ro is inverted */
-	int gpio_power;				/* gpio powering up MMC bus */
-	bool gpio_power_invert;			/* gpio power is inverted */
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
deleted file mode 100644
index 95b6e2a6e514..000000000000
--- a/arch/arm/mach-pxa/include/mach/ohci.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-
-	unsigned long flags;
-#define ENABLE_PORT1		(1 << 0)
-#define ENABLE_PORT2		(1 << 1)
-#define ENABLE_PORT3		(1 << 2)
-#define ENABLE_PORT_ALL		(ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
-
-#define POWER_SENSE_LOW		(1 << 3)
-#define POWER_CONTROL_LOW	(1 << 4)
-#define NO_OC_PROTECTION	(1 << 5)
-#define OC_MODE_GLOBAL		(0 << 6)
-#define OC_MODE_PERPORT		(1 << 6)
-
-	int power_on_delay;	/* Power On to Power Good time - in ms
-				 * HCD must wait for this duration before
-				 * accessing a powered on port
-				 */
-	int port_mode;
-#define PMM_NPS_MODE           1
-#define PMM_GLOBAL_MODE        2
-#define PMM_PERPORT_MODE       3
-
-	int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
deleted file mode 100644
index 58afb30d5298..000000000000
--- a/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _INCLUDE_PALMASOC_H_
-#define _INCLUDE_PALMASOC_H_
-
-struct palm27x_asoc_info {
-	int	jack_gpio;
-};
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h
deleted file mode 100644
index 6cf7df1d5830..000000000000
--- a/arch/arm/mach-pxa/include/mach/pata_pxa.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Generic PXA PATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef	__MACH_PATA_PXA_H__
-#define	__MACH_PATA_PXA_H__
-
-struct pata_pxa_pdata {
-	/* PXA DMA DREQ<0:2> pin */
-	uint32_t	dma_dreq;
-	/* Register shift */
-	uint32_t	reg_shift;
-	/* IRQ flags */
-	uint32_t	irq_flags;
-};
-
-#endif	/* __MACH_PATA_PXA_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 207ecb49a61b..f4d48d20754e 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,7 @@
 #define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
 #define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
 #define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define CKENC		__REG(0x41340024)	/* C Clock Enable Register */
 #define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
 
 #define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
deleted file mode 100644
index 9d82cb65ea56..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * PXA3xx U2D header
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PXA310_U2D__
-#define __PXA310_U2D__
-
-#include <linux/usb/ulpi.h>
-
-struct pxa3xx_u2d_platform_data {
-
-#define ULPI_SER_6PIN	(1 << 0)
-#define ULPI_SER_3PIN	(1 << 1)
-	unsigned int ulpi_mode;
-
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-
-/* Start PXA3xx U2D host */
-int pxa3xx_u2d_start_hc(struct usb_bus *host);
-/* Stop PXA3xx U2D host */
-void pxa3xx_u2d_stop_hc(struct usb_bus *host);
-
-extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
-
-#endif /* __PXA310_U2D__ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930_rotary.h b/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
deleted file mode 100644
index 053587caffdd..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_ROTARY_H
-#define __ASM_ARCH_PXA930_ROTARY_H
-
-/* NOTE:
- *
- * rotary can be either interpreted as a ralative input event (e.g.
- * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
- * or LEFT/RIGHT), depending on if up_key & down_key are assigned
- * or rel_code is assigned a non-zero value. When all are non-zero,
- * up_key and down_key will be preferred.
- */
-struct pxa930_rotary_platform_data {
-	int	up_key;
-	int	down_key;
-	int	rel_code;
-};
-
-void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA930_ROTARY_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930_trkball.h b/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
deleted file mode 100644
index 5e0789bc4729..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_TRKBALL_H
-#define __ASM_ARCH_PXA930_TRKBALL_H
-
-struct pxa930_trkball_platform_data {
-	int x_filter;
-	int y_filter;
-};
-
-#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
-
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
deleted file mode 100644
index 486b4c519ae2..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxafb.h
- *
- *  Support for the xscale frame buffer.
- *
- *  Author:     Jean-Frederic Clere
- *  Created:    Sep 22, 2003
- *  Copyright:  jfclere@sinix.net
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- *   STN  - for passive matrix
- *   DSTN - for dual scan passive matrix
- *   TFT  - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit     18 : for output enable polarity
- * bit     19 : for pixel clock edge
- * bit     20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK		0xf
-#define LCD_TYPE_UNKNOWN	0
-#define LCD_TYPE_MONO_STN	1
-#define LCD_TYPE_MONO_DSTN	2
-#define LCD_TYPE_COLOR_STN	3
-#define LCD_TYPE_COLOR_DSTN	4
-#define LCD_TYPE_COLOR_TFT	5
-#define LCD_TYPE_SMART_PANEL	6
-#define LCD_TYPE_MAX		7
-
-#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP	((8  << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
-#define LCD_PCLK_EDGE_RISE	(0 << 19)
-#define LCD_PCLK_EDGE_FALL	(1 << 19)
-#define LCD_ALTERNATE_MAPPING	(1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_int		cmap_greyscale:1,
-			depth:8,
-			transparency:1,
-			unused:22;
-
-	/* Parallel Mode Timing */
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
-	 * Note:
-	 * 1. all parameters in nanosecond (ns)
-	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
-	 *    in pxa27x and pxa3xx, initialize them to the same value or
-	 *    the larger one will be used
-	 * 3. same to {rd,wr}_pulse_width
-	 *
-	 * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
-	 * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
-	 * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
-	 */
-	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
-	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
-	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
-	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
-	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
-	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
-	struct pxafb_mode_info *modes;
-	unsigned int num_modes;
-
-	unsigned int	lcd_conn;
-	unsigned long	video_mem_size;
-
-	u_int		fixed_modes:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			acceleration_enabled:1,
-			unused:28;
-
-	/* The following should be defined in LCCR0
-	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
-	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
-	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
-	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
-	 *
-	 * The following should not be defined in LCCR0:
-	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
-	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
-	 */
-	u_int		lccr0;
-	/* The following should be defined in LCCR3
-	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
-	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
-	 *      LCCR3_Acb(X)                    AB Bias pin frequency
-	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
-	 *
-	 * The following should not be defined in LCCR3
-	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
-	 */
-	u_int		lccr3;
-	/* The following should be defined in LCCR4
-	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
-	 *
-	 * All other bits in LCCR4 should be left alone.
-	 */
-	u_int		lccr4;
-	void (*pxafb_backlight_power)(int);
-	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-	void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
-				    uint16_t *cmds, int n)
-{
-	return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
-	return 0;
-}
-#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5dae15ea6718..b6cc1816463e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,6 +17,8 @@
 #include <linux/syscore_ops.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/exception.h>
 
@@ -25,8 +27,6 @@
 
 #include "generic.h"
 
-#define IRQ_BASE		io_p2v(0x40d00000)
-
 #define ICIP			(0x000)
 #define ICMR			(0x004)
 #define ICLR			(0x008)
@@ -48,22 +48,19 @@
  * This is for peripheral IRQs internal to the PXA chip.
  */
 
+static void __iomem *pxa_irq_base;
 static int pxa_internal_irq_nr;
-
-static inline int cpu_has_ipr(void)
-{
-	return !cpu_is_pxa25x();
-}
+static bool cpu_has_ipr;
 
 static inline void __iomem *irq_base(int i)
 {
-	static unsigned long phys_base[] = {
-		0x40d00000,
-		0x40d0009c,
-		0x40d00130,
+	static unsigned long phys_base_offset[] = {
+		0x0,
+		0x9c,
+		0x130,
 	};
 
-	return io_p2v(phys_base[i]);
+	return pxa_irq_base + phys_base_offset[i];
 }
 
 void pxa_mask_irq(struct irq_data *d)
@@ -96,8 +93,8 @@ asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
 	uint32_t icip, icmr, mask;
 
 	do {
-		icip = __raw_readl(IRQ_BASE + ICIP);
-		icmr = __raw_readl(IRQ_BASE + ICMR);
+		icip = __raw_readl(pxa_irq_base + ICIP);
+		icmr = __raw_readl(pxa_irq_base + ICMR);
 		mask = icip & icmr;
 
 		if (mask == 0)
@@ -128,6 +125,8 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
 	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
 
 	pxa_internal_irq_nr = irq_nr;
+	cpu_has_ipr = !cpu_is_pxa25x();
+	pxa_irq_base = io_p2v(0x40d00000);
 
 	for (n = 0; n < irq_nr; n += 32) {
 		void __iomem *base = irq_base(n >> 5);
@@ -136,8 +135,8 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
 		__raw_writel(0, base + ICLR);	/* all IRQs are IRQ, not FIQ */
 		for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
 			/* initialize interrupt priority */
-			if (cpu_has_ipr())
-				__raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+			if (cpu_has_ipr)
+				__raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i));
 
 			irq = PXA_IRQ(i);
 			irq_set_chip_and_handler(irq, &pxa_internal_irq_chip,
@@ -168,9 +167,9 @@ static int pxa_irq_suspend(void)
 		__raw_writel(0, base + ICMR);
 	}
 
-	if (cpu_has_ipr()) {
+	if (cpu_has_ipr) {
 		for (i = 0; i < pxa_internal_irq_nr; i++)
-			saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
+			saved_ipr[i] = __raw_readl(pxa_irq_base + IPR(i));
 	}
 
 	return 0;
@@ -187,11 +186,11 @@ static void pxa_irq_resume(void)
 		__raw_writel(0, base + ICLR);
 	}
 
-	if (cpu_has_ipr())
+	if (cpu_has_ipr)
 		for (i = 0; i < pxa_internal_irq_nr; i++)
-			__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
+			__raw_writel(saved_ipr[i], pxa_irq_base + IPR(i));
 
-	__raw_writel(1, IRQ_BASE + ICCR);
+	__raw_writel(1, pxa_irq_base + ICCR);
 }
 #else
 #define pxa_irq_suspend		NULL
@@ -202,3 +201,93 @@ struct syscore_ops pxa_irq_syscore_ops = {
 	.suspend	= pxa_irq_suspend,
 	.resume		= pxa_irq_resume,
 };
+
+#ifdef CONFIG_OF
+static struct irq_domain *pxa_irq_domain;
+
+static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
+		       irq_hw_number_t hw)
+{
+	void __iomem *base = irq_base(hw / 32);
+
+	/* initialize interrupt priority */
+	if (cpu_has_ipr)
+		__raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw));
+
+	irq_set_chip_and_handler(hw, &pxa_internal_irq_chip,
+				 handle_level_irq);
+	irq_set_chip_data(hw, base);
+	set_irq_flags(hw, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops pxa_irq_ops = {
+	.map    = pxa_irq_map,
+	.xlate  = irq_domain_xlate_onecell,
+};
+
+static const struct of_device_id intc_ids[] __initconst = {
+	{ .compatible = "marvell,pxa-intc", },
+	{}
+};
+
+void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct pxa_intc_conf *conf;
+	struct resource res;
+	int n, ret;
+
+	node = of_find_matching_node(NULL, intc_ids);
+	if (!node) {
+		pr_err("Failed to find interrupt controller in arch-pxa\n");
+		return;
+	}
+	of_id = of_match_node(intc_ids, node);
+	conf = of_id->data;
+
+	ret = of_property_read_u32(node, "marvell,intc-nr-irqs",
+				   &pxa_internal_irq_nr);
+	if (ret) {
+		pr_err("Not found marvell,intc-nr-irqs property\n");
+		return;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret < 0) {
+		pr_err("No registers defined for node\n");
+		return;
+	}
+	pxa_irq_base = io_p2v(res.start);
+
+	if (of_find_property(node, "marvell,intc-priority", NULL))
+		cpu_has_ipr = 1;
+
+	ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
+	if (ret < 0) {
+		pr_err("Failed to allocate IRQ numbers\n");
+		return;
+	}
+
+	pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0,
+					       &pxa_irq_ops, NULL);
+	if (!pxa_irq_domain)
+		panic("Unable to add PXA IRQ domain\n");
+
+	irq_set_default_host(pxa_irq_domain);
+
+	for (n = 0; n < pxa_internal_irq_nr; n += 32) {
+		void __iomem *base = irq_base(n >> 5);
+
+		__raw_writel(0, base + ICMR);	/* disable all IRQs */
+		__raw_writel(0, base + ICLR);	/* all IRQs are IRQ, not FIQ */
+	}
+
+	/* only unmasked interrupts kick us out of idle */
+	__raw_writel(1, irq_base(0) + ICCR);
+
+	pxa_internal_irq_chip.irq_set_wake = fn;
+}
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 06b060025d11..000000000000
--- a/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= IDP_HB_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_HB_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_HB_LED;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
-	else
-		IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index 0bd85c884a7c..000000000000
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision.  Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
-	else
-		LUB_DISC_BLNK_LED |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index 4058ab340fe6..000000000000
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author:     Nicolas Pitre
- * Created:    Nov 05, 2002
- * Copyright:  MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
-	else
-		MST_LEDCTRL |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f6afaa..000000000000
--- a/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
-	if (machine_is_lubbock())
-		leds_event = lubbock_leds_event;
-	if (machine_is_mainstone())
-		leds_event = mainstone_leds_event;
-	if (machine_is_pxa_idp())
-		leds_event = idp_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe01345a..000000000000
--- a/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 1fb86edb857c..402874f9021f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,11 +42,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cee9ce2fc0b5..1a63eaa89867 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -41,10 +41,10 @@
 #include <mach/pxa27x.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/smemc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0ca0db787903..553056d9a3c5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
 #include <linux/major.h>
@@ -23,6 +24,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -46,9 +49,9 @@
 #include <mach/audio.h>
 #include <mach/lubbock.h>
 #include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/pm.h>
 #include <mach/smemc.h>
 
@@ -549,6 +552,98 @@ static void __init lubbock_map_io(void)
 	PCFR |= PCFR_OPDE;
 }
 
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct lubbock_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} lubbock_leds[] = {
+	{ "lubbock:D28", "default-on", },
+	{ "lubbock:D27", "cpu0", },
+	{ "lubbock:D26", "heartbeat" },
+	{ "lubbock:D25", },
+	{ "lubbock:D24", },
+	{ "lubbock:D23", },
+	{ "lubbock:D22", },
+	{ "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct lubbock_led *led = container_of(cdev,
+					 struct lubbock_led, cdev);
+	u32 reg = LUB_DISC_BLNK_LED;
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+
+	LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+	struct lubbock_led *led = container_of(cdev,
+					 struct lubbock_led, cdev);
+	u32 reg = LUB_DISC_BLNK_LED;
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_lubbock())
+		return -ENODEV;
+
+	/* All ON */
+	LUB_DISC_BLNK_LED |= 0xff;
+	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+		struct lubbock_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = lubbock_leds[i].name;
+		led->cdev.brightness_set = lubbock_led_set;
+		led->cdev.brightness_get = lubbock_led_get;
+		led->cdev.default_trigger = lubbock_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+#endif
+
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
 	.map_io		= lubbock_map_io,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 39561dcf65f2..f7922404d941 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -38,10 +38,10 @@
 
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 1aebaf719462..f27a61ee7ac7 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -28,6 +28,8 @@
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -45,11 +47,11 @@
 #include <mach/pxa27x.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -613,6 +615,98 @@ static void __init mainstone_map_io(void)
  	PCFR = 0x66;
 }
 
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct mainstone_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} mainstone_leds[] = {
+	{ "mainstone:D28", "default-on", },
+	{ "mainstone:D27", "cpu0", },
+	{ "mainstone:D26", "heartbeat" },
+	{ "mainstone:D25", },
+	{ "mainstone:D24", },
+	{ "mainstone:D23", },
+	{ "mainstone:D22", },
+	{ "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct mainstone_led *led = container_of(cdev,
+					 struct mainstone_led, cdev);
+	u32 reg = MST_LEDCTRL;
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+
+	MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+	struct mainstone_led *led = container_of(cdev,
+					 struct mainstone_led, cdev);
+	u32 reg = MST_LEDCTRL;
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_mainstone())
+		return -ENODEV;
+
+	/* All ON */
+	MST_LEDCTRL |= 0xff;
+	for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+		struct mainstone_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = mainstone_leds[i].name;
+		led->cdev.brightness_set = mainstone_led_set;
+		led->cdev.brightness_get = mainstone_led_get;
+		led->cdev.default_trigger = mainstone_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+#endif
+
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index bf99022b021f..2831308dba68 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -46,12 +46,12 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 #include <media/soc_camera.h>
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 83570a79e7d2..d04ed4961e60 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -24,11 +24,11 @@
 #include <linux/gpio.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa320.h>
 
 #include <mach/mxm8x10.h>
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index dad71cfa34c8..17d4c53017ca 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -29,11 +29,11 @@
 
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
 #include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
 #include <mach/palm27x.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 31e0433d83ba..8bcc96e3b0db 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -35,11 +35,11 @@
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/asoc-palm27x.h>
 #include <mach/palm27x.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0f6bd4fcfa3b..5ca7b904a30e 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -36,12 +36,12 @@
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
 #include <mach/palm27x.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index e2d97eed07a7..ca924cfedfc0 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -34,9 +34,9 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
 #include <mach/udc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index c054827c567f..997e6da9a9c4 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -34,11 +34,11 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
 #include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index fbdebee39a53..3f3c48f2f7ce 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -35,15 +35,15 @@
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
 #include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/udc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include <linux/platform_data/camera-pxa.h>
 #include <mach/palm27x.h>
 
 #include <sound/pxa2xx-lib.h>
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 0da35dccfd89..8b4366628a12 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -40,12 +40,12 @@
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
 #include <mach/palm27x.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index a97b59965bb9..8cdd4f58e253 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -40,16 +40,16 @@
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/udc.h>
-#include <mach/palmasoc.h>
+#include <linux/platform_data/asoc-palm27x.h>
 #include <mach/palm27x.h>
 
 #include <mach/pm.h>
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
 
 #include <media/soc_camera.h>
 
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index cb723e84bc27..113c57a03565 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,14 +28,14 @@
 
 #include <media/soc_camera.h>
 
-#include <mach/camera.h>
+#include <linux/platform_data/camera-pxa.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 89d98c832189..2910bb935c75 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -40,11 +40,11 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
 #include <mach/poodle.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
new file mode 100644
index 000000000000..c9192cea0033
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -0,0 +1,63 @@
+/*
+ *  linux/arch/arm/mach-pxa/pxa-dt.c
+ *
+ *  Copyright (C) 2012 Daniel Mack
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/pxa3xx.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PXA3xx
+extern void __init pxa3xx_dt_init_irq(void);
+
+static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40100000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40200000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
+	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
+	OF_DEV_AUXDATA("mrvl,pxa-gpio",		0x40e00000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
+	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("marvell,pxa3xx-nand",	0x43100000, "pxa3xx-nand", NULL),
+	{}
+};
+
+static void __init pxa3xx_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     pxa3xx_auxdata_lookup, NULL);
+}
+
+static const char *pxa3xx_dt_board_compat[] __initdata = {
+	"marvell,pxa300",
+	"marvell,pxa310",
+	"marvell,pxa320",
+	NULL,
+};
+#endif
+
+#ifdef CONFIG_PXA3xx
+DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
+	.map_io		= pxa3xx_map_io,
+	.init_irq	= pxa3xx_dt_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
+	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
+	.init_machine	= pxa3xx_dt_init,
+	.dt_compat	= pxa3xx_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 4726c246dcdc..8047ee0effc5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -30,7 +30,7 @@
 #include <mach/irqs.h>
 #include <mach/pxa27x.h>
 #include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index f8ec85450c42..447dcbb22f6f 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -19,7 +19,7 @@
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa25x.h>
 #include <mach/reset.h>
-#include <mach/irda.h>
+#include <linux/platform_data/irda-pxaficp.h>
 
 void pxa2xx_clear_reset_status(unsigned int mask)
 {
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 5ead6d480c6d..7dbe3ccf1993 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -27,7 +27,7 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 struct pxa3xx_u2d_ulpi {
 	struct clk		*clk;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index dffb7e813d98..656a1bb16d14 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/syscore_ops.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -27,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/smemc.h>
@@ -40,6 +41,8 @@
 #define PECR_IE(n)	((1 << ((n) * 2)) << 28)
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)
 
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
+
 static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -382,7 +385,7 @@ static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
 	pxa_ext_wakeup_chip.irq_set_wake = fn;
 }
 
-void __init pxa3xx_init_irq(void)
+static void __init __pxa3xx_init_irq(void)
 {
 	/* enable CP6 access */
 	u32 value;
@@ -390,10 +393,23 @@ void __init pxa3xx_init_irq(void)
 	value |= (1 << 6);
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
-	pxa_init_irq(56, pxa3xx_set_wake);
 	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 }
 
+void __init pxa3xx_init_irq(void)
+{
+	__pxa3xx_init_irq();
+	pxa_init_irq(56, pxa3xx_set_wake);
+}
+
+#ifdef CONFIG_OF
+void __init pxa3xx_dt_init_irq(void)
+{
+	__pxa3xx_init_irq();
+	pxa_dt_irq_init(pxa3xx_set_wake);
+}
+#endif	/* CONFIG_OF */
+
 static struct map_desc pxa3xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
 		.virtual	= (unsigned long)SMEMC_VIRT,
@@ -466,7 +482,8 @@ static int __init pxa3xx_init(void)
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+		if (!of_have_populated_dt())
+			ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 5905ed130e94..25b08bfa997b 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -49,10 +49,10 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
 
 static struct eeti_ts_platform_data eeti_ts_pdata = {
 	.irq_active_high = 1,
+	.irq_gpio = GPIO_TOUCH_IRQ,
 };
 
 static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
 	.type	= "eeti_ts",
 	.addr	= 0x0a,
-	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
 	.platform_data = &eeti_ts_pdata,
 };
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 86c95a5d8533..08d87a5d2639 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -32,7 +32,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa930.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index bdf4cb88ca0a..5a406f794798 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -579,8 +579,8 @@ static int sharpsl_ac_check(void)
 static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_delayed_work_sync(&toggle_charger);
-	flush_delayed_work_sync(&sharpsl_bat);
+	flush_delayed_work(&toggle_charger);
+	flush_delayed_work(&sharpsl_bat);
 
 	if (sharpsl_pm.charge_mode == CHRG_ON)
 		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
@@ -879,7 +879,7 @@ static const struct platform_suspend_ops sharpsl_pm_ops = {
 
 static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
 {
-	int ret;
+	int ret, irq;
 
 	if (!pdev->dev.platform_data)
 		return -EINVAL;
@@ -907,24 +907,28 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
 	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
 	/* Register interrupt handlers */
-	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
+	irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
+	if (request_irq(irq, sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
 	}
 
-	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
+	irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
+	if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
 	}
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
+		irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
+		if (request_irq(irq, sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
 		}
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq) {
 		/* Register interrupt handler. */
-		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
+		irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
+		if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
 		}
 	}
 
@@ -953,14 +957,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
 
 	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
 
-	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
-	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+	free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+	free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
 	if (sharpsl_pm.machinfo->gpio_fatal)
-		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+		free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
 
 	if (sharpsl_pm.machinfo->batfull_irq)
-		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+		free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
 
 	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
 	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 363d91b44ecb..2073f0e6db0d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -41,10 +41,10 @@
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
 #include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 30b1b0b3c7f7..456560b5aad4 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -44,7 +44,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/smemc.h>
@@ -52,7 +52,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
+#include <linux/platform_data/sht15.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 736bfdc50ee6..1a25f8a7b0ce 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -24,8 +24,8 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 4d4eb60bad1e..233629edf7ee 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -42,8 +42,8 @@
 
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 166dd32cc1d3..fbbcbed4d1d4 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -43,10 +43,10 @@
 #include <mach/pxa27x.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/smemc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 130379fb9d0f..392412ce4dac 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -48,9 +48,9 @@
 
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index e1740acd15f1..491b6c9a2a9b 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -33,12 +33,12 @@
 #include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
-#include <mach/pata_pxa.h>
+#include <linux/platform_data/ata-pxa.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index b9320cb8a11f..97529face7aa 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -37,9 +37,9 @@
 #include <mach/pxa27x.h>
 #include <mach/mfp-pxa27x.h>
 #include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
 #include <mach/pm.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index af3d4f7646d7..abd3aa145083 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -38,14 +38,14 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/pm.h>
 #include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
 #include <mach/zeus.h>
 #include <mach/smemc.h>
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 98eec80623e3..226279fac9d4 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -26,12 +26,12 @@
 #include <asm/mach/arch.h>
 #include <mach/pxa3xx.h>
 #include <mach/audio.h>
-#include <mach/pxafb.h>
+#include <linux/platform_data/video-pxafb.h>
 #include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 45868bb43cbd..682467480588 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,12 +30,10 @@
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
@@ -226,115 +224,10 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 	.cd_invert	= true,
 };
 
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
-	.ops	= &oscvco_clk_ops,
-	.params	= &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:uart0",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:uart1",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:uart2",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 is on the dev chip in PB1176 */
-		.dev_id		= "dev:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART4 only exists in PB1176 */
-		.dev_id		= "fpga:uart4",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:kmi0",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:kmi1",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:mmc0",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD is in the PB1176 and EB DevChip */
-		.dev_id		= "dev:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* PB:CLCD */
-		.dev_id		= "issp:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:ssp0",
-		.clk		= &ref24_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
 void __init realview_init_early(void)
 {
 	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
 
-	if (machine_is_realview_pb1176())
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
 	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
 }
 
@@ -436,44 +329,6 @@ struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 val;
-	u32 led = 1 << smp_processor_id();
-
-	local_irq_save(flags);
-	val = readl(VA_LEDS_BASE);
-
-	switch (ledevt) {
-	case led_idle_start:
-		val = val & ~led;
-		break;
-
-	case led_idle_end:
-		val = val | led;
-		break;
-
-	case led_timer:
-		val = val ^ REALVIEW_SYS_LED7;
-		break;
-
-	case led_halted:
-		val = 0;
-		break;
-
-	default:
-		break;
-	}
-
-	writel(val, VA_LEDS_BASE);
-	local_irq_restore(flags);
-}
-#endif	/* CONFIG_LEDS */
-
 /*
  * Where is the timer (VA)?
  */
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index f8f2c0ac4c01..602ca5ec52c5 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,7 +26,6 @@
 #include <linux/io.h>
 
 #include <asm/setup.h>
-#include <asm/leds.h>
 
 #define APB_DEVICE(name, busid, base, plat)			\
 static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
@@ -47,7 +46,6 @@ extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
 extern void __iomem *timer3_va_base;
 
-extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
@@ -56,4 +54,7 @@ extern void realview_init_early(void);
 extern void realview_fixup(struct tag *tags, char **from,
 			   struct meminfo *meminfo);
 
+extern struct smp_operations realview_smp_ops;
+extern void realview_cpu_die(unsigned int cpu);
+
 #endif
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index 57d9efba2956..53818e5cd3ad 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -16,8 +16,6 @@
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
-extern volatile int pen_release;
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -89,17 +87,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref realview_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
@@ -118,12 +111,3 @@ void platform_cpu_die(unsigned int cpu)
 	if (spurious)
 		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
deleted file mode 100644
index e58d0771b64e..000000000000
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-realview/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 17c878ddbc70..300f7064465d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -22,9 +22,9 @@
 #include <mach/board-pb11mp.h>
 #include <mach/board-pbx.h>
 
-#include "core.h"
+#include <plat/platsmp.h>
 
-extern void versatile_secondary_startup(void);
+#include "core.h"
 
 static void __iomem *scu_base_addr(void)
 {
@@ -43,7 +43,7 @@ static void __iomem *scu_base_addr(void)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init realview_smp_init_cpus(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
@@ -63,7 +63,7 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 {
 
 	scu_enable(scu_base_addr());
@@ -77,3 +77,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(virt_to_phys(versatile_secondary_startup),
 		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
+
+struct smp_operations realview_smp_ops __initdata = {
+	.smp_init_cpus		= realview_smp_init_cpus,
+	.smp_prepare_cpus	= realview_smp_prepare_cpus,
+	.smp_secondary_init	= versatile_secondary_init,
+	.smp_boot_secondary	= versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= realview_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index baf382c5e776..d3b3cd216d64 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,12 +27,11 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
-#include <asm/pmu.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -297,7 +296,7 @@ static struct resource pmu_resources[] = {
 
 static struct platform_device pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= ARRAY_SIZE(pmu_resources),
 	.resource		= pmu_resources,
 };
@@ -414,6 +413,7 @@ static void __init realview_eb_timer_init(void)
 	else
 		timer_irq = IRQ_EB_TIMER0_1;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(timer_irq);
 	realview_eb_twd_init();
 }
@@ -462,10 +462,6 @@ static void __init realview_eb_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index b1d7cafa1a6d..07d6672ddae7 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,12 +29,11 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
-#include <asm/pmu.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -280,7 +279,7 @@ static struct resource pmu_resource = {
 
 static struct platform_device pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= 1,
 	.resource		= &pmu_resource,
 };
@@ -326,6 +325,7 @@ static void __init realview_pb1176_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
 	realview_timer_init(IRQ_DC1176_TIMER0);
 }
 
@@ -375,10 +375,6 @@ static void __init realview_pb1176_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index a98c536e3327..7ed53d75350f 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,12 +27,11 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
-#include <asm/pmu.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -263,7 +262,7 @@ static struct resource pmu_resources[] = {
 
 static struct platform_device pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= ARRAY_SIZE(pmu_resources),
 	.resource		= pmu_resources,
 };
@@ -312,6 +311,7 @@ static void __init realview_pb11mp_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(IRQ_TC11MP_TIMER0_1);
 	realview_pb11mp_twd_init();
 }
@@ -357,15 +357,12 @@ static void __init realview_pb11mp_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(realview_smp_ops),
 	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 59650174e6ed..9992431b8a15 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,11 +27,10 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
-#include <asm/pmu.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 
@@ -241,7 +240,7 @@ static struct resource pmu_resource = {
 
 static struct platform_device pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= 1,
 	.resource		= &pmu_resource,
 };
@@ -261,6 +260,7 @@ static void __init realview_pba8_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(IRQ_PBA8_TIMER0_1);
 }
 
@@ -299,10 +299,6 @@ static void __init realview_pba8_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 3f2f605624e9..4f486f05108a 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,11 +26,10 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
-#include <asm/pmu.h>
 #include <asm/smp_twd.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
@@ -280,7 +279,7 @@ static struct resource pmu_resources[] = {
 
 static struct platform_device pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= ARRAY_SIZE(pmu_resources),
 	.resource		= pmu_resources,
 };
@@ -320,6 +319,7 @@ static void __init realview_pbx_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(IRQ_PBX_TIMER0_1);
 	realview_pbx_twd_init();
 }
@@ -394,15 +394,12 @@ static void __init realview_pbx_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(realview_smp_ops),
 	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index e24961109b70..d56b0f7f2b20 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02
 	select I2C
 	select POWER_SUPPLY
 	select MACH_NEO1973
-	select S3C2410_PWM
+	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
@@ -493,7 +493,7 @@ config MACH_RX1950
 	select S3C24XX_DCLK
 	select PM_H1940 if PM
 	select I2C
-	select S3C2410_PWM
+	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index cb2883d553b5..749220f91a70 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -87,6 +87,19 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
+
+	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
+		return parent_rate;
+
+	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
+
+	return parent_rate / (camdivn + 1) / 2;
+}
+
 /* Extra S3C2440 clocks */
 
 static struct clk s3c2440_clk_cam = {
@@ -99,6 +112,7 @@ static struct clk s3c2440_clk_cam_upll = {
 	.name		= "camif-upll",
 	.ops		= &(struct clk_ops) {
 		.set_rate	= s3c2440_camif_upll_setrate,
+		.get_rate	= s3c2440_camif_upll_getrate,
 		.round_rate	= s3c2440_camif_upll_round,
 	},
 };
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 87e75a250d5e..3b2cf6db3634 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -37,9 +37,9 @@
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index a5eeb62ce1c2..57aee916bdb1 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -138,19 +138,7 @@ static struct platform_driver h1940bt_driver = {
 	.remove		= h1940bt_remove,
 };
 
-
-static int __init h1940bt_init(void)
-{
-	return platform_driver_register(&h1940bt_driver);
-}
-
-static void __exit h1940bt_exit(void)
-{
-	platform_driver_unregister(&h1940bt_driver);
-}
-
-module_init(h1940bt_init);
-module_exit(h1940bt_exit);
+module_platform_driver(h1940bt_driver);
 
 MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
 MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index 454831b66037..ee99fd56c043 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,
diff --git a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
deleted file mode 100644
index d8a7672519b6..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
-struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
-	char			*name;
-	char			*def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index ea2c4b003d58..f4ad99c1e476 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -53,7 +53,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 5a7d0c0010f7..1ee8c4638743 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -40,8 +40,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"
@@ -424,7 +424,8 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPA(0));
 	}
 }
 
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 7a05abf1270b..00381fe5de32 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -36,8 +36,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -47,7 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 1cf1720682d3..6a30ce7e4aa7 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -45,9 +45,9 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
@@ -62,7 +62,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 92e1f93a6bca..4a963467b7ee 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -73,21 +73,21 @@
 #include <mach/regs-gpio.h>
 #include <mach/fb.h>
 
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <mach/regs-mem.h>
 #include <mach/hardware.h>
 
 #include <mach/gta02.h>
 
 #include <plat/regs-serial.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index bb8d008d5a5c..63aaf076f611 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -56,8 +56,8 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
@@ -65,8 +65,8 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <sound/uda1380.h>
 
@@ -380,7 +380,7 @@ int h1940_led_blink_set(unsigned gpio, int state,
 	default:
 		blink_gpio = S3C2410_GPA(3);
 		check_gpio1 = S3C2410_GPA(1);
-		check_gpio1 = S3C2410_GPA(7);
+		check_gpio2 = S3C2410_GPA(7);
 		break;
 	}
 
@@ -460,7 +460,7 @@ static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
 		break;
 	default:
 		break;
-	};
+	}
 }
 
 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index ae73ba34ecc6..c9954e26b492 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -32,8 +32,8 @@
 #include <asm/mach/irq.h>
 
 #include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
@@ -54,7 +54,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
@@ -512,8 +512,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
-	s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+	gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPC(5));
 }
 
 static void __init jive_machine_init(void)
@@ -623,11 +623,11 @@ static void __init jive_machine_init(void)
 	gpio_request(S3C2410_GPB(7), "jive spi");
 	gpio_direction_output(S3C2410_GPB(7), 1);
 
-	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
-	s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
+	gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
+	gpio_free(S3C2410_GPB(6));
 
-	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
-	s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+	gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPG(8));
 
 	/* initialise the WM8750 spi */
 
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index bd6d2525debe..393c0f1ac11a 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -39,14 +39,14 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -638,9 +638,9 @@ static void __init mini2440_init(void)
 	gpio_free(S3C2410_GPG(4));
 
 	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+	gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
 	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
-	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
-	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+	gpio_free(S3C2410_GPB(1));
 
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 383d00ca8f60..c53a9bfe1417 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/fb.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -41,15 +41,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 #include <plat/s3c2410.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 5c05ba1c330f..a2b92b0898e2 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -38,7 +38,7 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/s3c2410.h>
@@ -119,17 +119,17 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 
 static void __init nexcoder_sensorboard_init(void)
 {
-	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
-	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
-	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
-
-	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
-	s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+	/* Initialize SCCB bus */
+	gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPE(14)); /* IICSCL */
+	gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPE(15)); /* IICSDA */
+
+	/* Power up the sensor board */
+	gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
+	gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+	gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index ad2792dfbee1..5876c6ba7500 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -175,18 +175,7 @@ static struct platform_driver osiris_dvs_driver = {
 	},
 };
 
-static int __init osiris_dvs_init(void)
-{
-	return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
-	platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
+module_platform_driver(osiris_dvs_driver);
 
 MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 95d077255024..bb36d832bd3d 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -41,8 +41,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -274,8 +274,8 @@ static int osiris_pm_suspend(void)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+	gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
+	gpio_free(S3C2410_GPA(21));
 
 	return 0;
 }
@@ -396,7 +396,8 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPA(0));
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bc4b6efb3b27..bca39f0232b3 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -35,7 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/cpu.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 678bbca2b5e5..7b6ba13d7285 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -47,13 +47,13 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
 #include <plat/regs-serial.h>
 #include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 7ee73f27f207..379fde521d37 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -49,15 +49,15 @@
 #include <plat/clock.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/irq.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <sound/uda1380.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 56af35447598..dacbb9a2122a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -43,7 +43,7 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/h1940.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <mach/fb.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index bdc27e772876..82796b97cb04 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -47,7 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index b11451b853d8..ce99fd8bbbc5 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -38,8 +38,8 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
 #include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index c3100a044fbe..db2787aa1e5e 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,17 +39,17 @@
 #include <mach/regs-s3c2443-clock.h>
 
 #include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2416.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/s3c-hsudc.h>
 
 #include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 83a1036d7dcb..b7ff882c6ce6 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -37,7 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 209236956222..2568656f046f 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -37,7 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2443.h>
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index fe990289ee7d..495bf5cf52e9 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -45,7 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index bd5f189f0424..14d5b12e388c 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -43,13 +43,13 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 94bfaa1fb148..f1d44ae11833 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -39,8 +39,8 @@
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <plat/iic.h>
-#include <plat/nand.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
index 9e90a7cbd1d6..7b4f33332d19 100644
--- a/arch/arm/mach-s3c24xx/setup-i2c.c
+++ b/arch/arm/mach-s3c24xx/setup-i2c.c
@@ -16,7 +16,7 @@
 struct platform_device;
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index 11881c9a38c0..fd0ef05763a9 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -24,7 +24,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 #include <plat/devs.h>
 
 #include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index d91c1a725139..17f8356177c1 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -34,7 +34,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/devs.h>
 
 #include "simtec.h"
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 124fd5d63006..35f3e07eaccc 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -20,7 +20,7 @@
 #include <mach/dma.h>
 
 #include <plat/devs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <plat/gpio-cfg.h>
 
 static const char *rclksrc[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index ffa29ddfdfce..15c58dfc4584 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -42,7 +42,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9e382e7c77cb..4e3fe57674c8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -16,6 +16,7 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 #include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/arizona/pdata.h>
 
 #include <linux/regulator/machine.h>
 
@@ -24,7 +25,7 @@
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>
 
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #include <mach/crag6410.h>
 
@@ -181,9 +182,33 @@ static const struct i2c_board_info wm1277_devs[] = {
 	},
 };
 
-static const struct i2c_board_info wm5102_devs[] = {
-	{ I2C_BOARD_INFO("wm5102", 0x1a),
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
+static struct arizona_pdata wm5102_pdata = {
+	.ldoena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.irq_active_high = true,
+	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
+	.gpio_defaults = {
+		[2] = 0x10000, /* AIF3TXLRCLK */
+		[3] = 0x4,     /* OPCLK */
+	},
+};
+
+static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
+	.line = S3C64XX_GPN(5),
+};
+
+static struct spi_board_info wm5102_spi_devs[] = {
+	[0] = {
+		.modalias	= "wm5102",
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
+				  WM831X_IRQ_GPIO_2,
+		.controller_data = &wm5102_spi_csinfo,
+		.platform_data = &wm5102_pdata,
+	},
 };
 
 static const struct i2c_board_info wm6230_i2c_devs[] = {
@@ -223,8 +248,9 @@ static __devinitdata const struct {
 	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
-	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
-	  .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
+	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut",
+	  .spi_devs = wm5102_spi_devs,
+	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
 };
 
 static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 09cd81207a3f..8b4d46706645 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -61,14 +61,14 @@
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pm.h>
 
 #include "common.h"
@@ -287,6 +287,16 @@ static struct platform_device littlemill_device = {
 	.id		= -1,
 };
 
+static struct platform_device bells_wm5102_device = {
+	.name		= "bells",
+	.id		= 0,
+};
+
+static struct platform_device bells_wm5110_device = {
+	.name		= "bells",
+	.id		= 1,
+};
+
 static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
@@ -359,6 +369,8 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&tobermory_device,
 	&littlemill_device,
 	&lowland_device,
+	&bells_wm5102_device,
+	&bells_wm5110_device,
 	&wallvdd_device,
 };
 
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 689088162f77..02222b32b7d3 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -34,9 +34,9 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 5539a255a704..09311cc40115 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -38,9 +38,9 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/regs-fb-v4.h>
 
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index cad2e05eddf7..46ee88d16815 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -37,7 +37,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 326b21604bc3..6daca203e72b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -39,9 +39,9 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/regs-fb-v4.h>
 
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ceeb1de40376..c6d7390939ae 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -30,13 +30,13 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
 #include <plat/regs-serial.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index b0f4525c66bd..a928fae5694e 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -35,7 +35,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0fe4f1503f4f..2547a8846472 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -60,8 +60,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
@@ -69,7 +69,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 241af94a9e70..40666ba8d607 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 3d13a961986d..3fdb24c4e62a 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
index 41b425602d88..648d8b85bf6b 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -17,7 +17,7 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 
 void s3c64xx_ide_setup_gpio(void)
 {
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
index 91113ddc51da..a0d6edfd23a0 100644
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 92fefad505cc..dea78a848244 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -45,10 +45,10 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index e2335ecf6eae..6f14fc729b8f 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -45,10 +45,10 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index 46b463917c54..a32edc545e6c 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -19,7 +19,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/i2c.h>
 
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index 6ad3b986021c..ca2c5c7f8aa6 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -19,7 +19,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/i2c.h>
 
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 9d4bde3f1110..1cc252cef268 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 0c3ae38d27ca..5d2c0934928b 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -44,12 +44,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/adc.h>
 #include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
index eaef7a3bda49..89a6a769d622 100644
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ b/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -18,7 +18,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
index aaff74a90dee..faa667ef02cb 100644
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ b/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -18,7 +18,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 8367749c3eec..0a5480bbcbd5 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 822a55950685..00f1e47d490a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -43,7 +43,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index dfc29236321c..d9c99fcc1aa7 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -27,8 +27,8 @@
 #include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pm.h>
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 918b23d71fdf..7d6fab420508 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -38,9 +38,9 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 74e99bc0dc9b..18785cb5e1ef 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -26,7 +26,7 @@
 #include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/s5p-time.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index 0f1cc3a1c1e8..4a15849766c0 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index f61365a34c56..4777f6b97a92 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index 2f91b5cefbc6..bbce6c74b915 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 60b97ec01676..1aed9e70465d 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -7,21 +7,17 @@ obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
-led-y := leds.o
 
 obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
 obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
 
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
-led-$(CONFIG_SA1100_ASSABET)		+= leds-assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
 
 obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-led-$(CONFIG_SA1100_BADGE4)		+= leds-badge4.o
 
 obj-$(CONFIG_SA1100_CERF)		+= cerf.o
-led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
@@ -29,13 +25,11 @@ obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
 
 obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
 obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
 
 obj-$(CONFIG_SA1100_LART)		+= lart.o
-led-$(CONFIG_SA1100_LART)		+= leds-lart.o
 
 obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
 obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
@@ -46,9 +40,6 @@ obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
 
 obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
 
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
 # Miscellaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d673211f121c..e1ccda6128eb 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
 
 #include <video/sa1100fb.h>
 
@@ -37,7 +39,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 #include <mach/assabet.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
 #include <mach/irqs.h>
 
 #include "generic.h"
@@ -529,6 +531,89 @@ static void __init assabet_map_io(void)
 	sa1100_register_uart(2, 3);
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct assabet_led {
+	struct led_classdev cdev;
+	u32 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} assabet_leds[] = {
+	{ "assabet:red", "cpu0",},
+	{ "assabet:green", "heartbeat", },
+};
+
+/*
+ * The LED control in Assabet is reversed:
+ *  - setting bit means turn off LED
+ *  - clearing bit means turn on LED
+ */
+static void assabet_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct assabet_led *led = container_of(cdev,
+			struct assabet_led, cdev);
+
+	if (b != LED_OFF)
+		ASSABET_BCR_clear(led->mask);
+	else
+		ASSABET_BCR_set(led->mask);
+}
+
+static enum led_brightness assabet_led_get(struct led_classdev *cdev)
+{
+	struct assabet_led *led = container_of(cdev,
+			struct assabet_led, cdev);
+
+	return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init assabet_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_assabet())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
+		struct assabet_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = assabet_leds[i].name;
+		led->cdev.brightness_set = assabet_led_set;
+		led->cdev.brightness_get = assabet_led_get;
+		led->cdev.default_trigger = assabet_leds[i].trigger;
+
+		if (!i)
+			led->mask = ASSABET_BCR_LED_RED;
+		else
+			led->mask = ASSABET_BCR_LED_GREEN;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(assabet_leds_init);
+#endif
 
 MACHINE_START(ASSABET, "Intel-Assabet")
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b30fb99b587c..038df4894b0f 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -22,6 +22,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -76,8 +78,36 @@ static struct platform_device sa1111_device = {
 	.resource	= sa1111_resources,
 };
 
+/* LEDs */
+struct gpio_led badge4_gpio_leds[] = {
+	{
+		.name			= "badge4:red",
+		.default_trigger	= "heartbeat",
+		.gpio			= 7,
+	},
+	{
+		.name			= "badge4:green",
+		.default_trigger	= "cpu0",
+		.gpio			= 9,
+	},
+};
+
+static struct gpio_led_platform_data badge4_gpio_led_info = {
+	.leds		= badge4_gpio_leds,
+	.num_leds	= ARRAY_SIZE(badge4_gpio_leds),
+};
+
+static struct platform_device badge4_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &badge4_gpio_led_info,
+	}
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
+	&badge4_leds,
 };
 
 static int __init badge4_sa1111_init(void)
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 09d7f4b4b354..ad0eb08ea077 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -17,6 +17,8 @@
 #include <linux/irq.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -28,7 +30,7 @@
 #include <asm/mach/serial_sa1100.h>
 
 #include <mach/cerf.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
 #include <mach/irqs.h>
 #include "generic.h"
 
@@ -43,8 +45,48 @@ static struct platform_device cerfuart2_device = {
 	.resource	= cerfuart2_resources,
 };
 
+/* LEDs */
+struct gpio_led cerf_gpio_leds[] = {
+	{
+		.name			= "cerf:d0",
+		.default_trigger	= "heartbeat",
+		.gpio			= 0,
+	},
+	{
+		.name			= "cerf:d1",
+		.default_trigger	= "cpu0",
+		.gpio			= 1,
+	},
+	{
+		.name			= "cerf:d2",
+		.default_trigger	= "default-on",
+		.gpio			= 2,
+	},
+	{
+		.name			= "cerf:d3",
+		.default_trigger	= "default-on",
+		.gpio			= 3,
+	},
+
+};
+
+static struct gpio_led_platform_data cerf_gpio_led_info = {
+	.leds		= cerf_gpio_leds,
+	.num_leds	= ARRAY_SIZE(cerf_gpio_leds),
+};
+
+static struct platform_device cerf_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &cerf_gpio_led_info,
+	}
+};
+
+
 static struct platform_device *cerf_devices[] __initdata = {
 	&cerfuart2_device,
+	&cerf_leds,
 };
 
 #ifdef CONFIG_SA1100_CERF_FLASH_32MB
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index ea5cff38745c..170cb6107f68 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -45,7 +45,7 @@
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
 #include <mach/irqs.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 7f86bd911826..fc106aab7c7e 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -21,6 +21,10 @@
 #include <linux/serial_core.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -183,9 +187,37 @@ static struct flash_platform_data hackkit_flash_data = {
 static struct resource hackkit_flash_resource =
 	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
+/* LEDs */
+struct gpio_led hackkit_gpio_leds[] = {
+	{
+		.name			= "hackkit:red",
+		.default_trigger	= "cpu0",
+		.gpio			= 22,
+	},
+	{
+		.name			= "hackkit:green",
+		.default_trigger	= "heartbeat",
+		.gpio			= 23,
+	},
+};
+
+static struct gpio_led_platform_data hackkit_gpio_led_info = {
+	.leds		= hackkit_gpio_leds,
+	.num_leds	= ARRAY_SIZE(hackkit_gpio_leds),
+};
+
+static struct platform_device hackkit_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &hackkit_gpio_led_info,
+	}
+};
+
 static void __init hackkit_init(void)
 {
 	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
+	platform_device_register(&hackkit_leds);
 }
 
 /**********************************************************************
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
deleted file mode 100644
index c38f60915cb6..000000000000
--- a/arch/arm/mach-sa1100/include/mach/SA-1111.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Moved to new location
- */
-#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
-#include <asm/hardware/sa1111.h>
diff --git a/arch/arm/mach-sa1100/include/mach/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
deleted file mode 100644
index 8a5482d908db..000000000000
--- a/arch/arm/mach-sa1100/include/mach/lart.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _INCLUDE_LART_H
-#define _INCLUDE_LART_H
-
-#define LART_GPIO_ETH0			GPIO_GPIO0
-#define LART_IRQ_ETH0			IRQ_GPIO0
-
-#define LART_GPIO_IDE			GPIO_GPIO1
-#define LART_IRQ_IDE			IRQ_GPIO1
-
-#define LART_GPIO_UCB1200		GPIO_GPIO18
-#define LART_IRQ_UCB1200		IRQ_GPIO18
-
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
deleted file mode 100644
index 4b2860ae3828..000000000000
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  arch/arm/mach-sa1100/include/mach/mcp.h
- *
- *  Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
-	u32 mccr0;
-	u32 mccr1;
-	unsigned int sclk_rate;
-	void *codec_pdata;
-};
-
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
index cdea671e8931..ac2ea767215d 100644
--- a/arch/arm/mach-sa1100/include/mach/simpad.h
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -87,7 +87,7 @@
 #define SIMPAD_CS3_PCMCIA_SHORT		(SIMPAD_CS3_GPIO_BASE + 22)
 #define SIMPAD_CS3_GPIO_23		(SIMPAD_CS3_GPIO_BASE + 23)
 
-#define CS3_BASE        0xf1000000
+#define CS3_BASE        IOMEM(0xf1000000)
 
 long simpad_get_cs3_ro(void);
 long simpad_get_cs3_shadow(void);
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index b775a0abec0a..3048b17e84c5 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -5,6 +5,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
 
 #include <video/sa1100fb.h>
 
@@ -16,7 +19,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
 #include <mach/irqs.h>
 
 #include "generic.h"
@@ -126,6 +129,27 @@ static struct map_desc lart_io_desc[] __initdata = {
 	}
 };
 
+/* LEDs */
+struct gpio_led lart_gpio_leds[] = {
+	{
+		.name			= "lart:red",
+		.default_trigger	= "cpu0",
+		.gpio			= 23,
+	},
+};
+
+static struct gpio_led_platform_data lart_gpio_led_info = {
+	.leds		= lart_gpio_leds,
+	.num_leds	= ARRAY_SIZE(lart_gpio_leds),
+};
+
+static struct platform_device lart_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &lart_gpio_led_info,
+	}
+};
 static void __init lart_map_io(void)
 {
 	sa1100_map_io();
@@ -139,6 +163,8 @@ static void __init lart_map_io(void)
 	GPDR |= GPIO_UART_TXD;
 	GPDR &= ~GPIO_UART_RXD;
 	PPAR |= PPAR_UPR;
+
+	platform_device_register(&lart_leds);
 }
 
 MACHINE_START(LART, "LART")
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 3699176bca94..000000000000
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- *   - Green - toggles state every 50 timer interrupts
- *   - Red   - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK	(ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= ASSABET_BCR_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= ASSABET_BCR_LED_RED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~ASSABET_BCR_LED_RED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~ASSABET_BCR_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= ASSABET_BCR_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index f99fac3eedb6..000000000000
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED		GPIO_GPIO(7)
-#define LED_GREEN       GPIO_GPIO(9)
-#define LED_MASK	(LED_RED|LED_GREEN)
-
-#define LED_IDLE	LED_GREEN
-#define LED_TIMER	LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
-        unsigned long flags;
-
-	local_irq_save(flags);
-
-        switch (evt) {
-        case led_start:
-		GPDR |= LED_MASK;
-                hw_led_state = LED_MASK;
-                led_state = LED_STATE_ENABLED;
-                break;
-
-        case led_stop:
-                led_state &= ~LED_STATE_ENABLED;
-                break;
-
-        case led_claim:
-                led_state |= LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-        case led_release:
-                led_state &= ~LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state ^= LED_TIMER;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-		/* LED off when system is idle */
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_IDLE;
-                break;
-
-        case led_idle_end:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_IDLE;
-                break;
-#endif
-
-        case led_red_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_RED;
-                break;
-
-        case led_red_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_RED;
-                break;
-
-        case led_green_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_GREEN;
-                break;
-
-        case led_green_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_GREEN;
-                break;
-
-	default:
-		break;
-        }
-
-        if  (led_state & LED_STATE_ENABLED) {
-                GPSR = hw_led_state;
-                GPCR = hw_led_state ^ LED_MASK;
-        }
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 30fc3b2bf555..000000000000
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0          GPIO_GPIO(0)
-#define LED_D1          GPIO_GPIO(1)
-#define LED_D2          GPIO_GPIO(2)
-#define LED_D3          GPIO_GPIO(3)
-#define LED_MASK        (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
-        unsigned long flags;
-
-	local_irq_save(flags);
-
-        switch (evt) {
-        case led_start:
-                hw_led_state = LED_MASK;
-                led_state = LED_STATE_ENABLED;
-                break;
-
-        case led_stop:
-                led_state &= ~LED_STATE_ENABLED;
-                break;
-
-        case led_claim:
-                led_state |= LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-        case led_release:
-                led_state &= ~LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state ^= LED_D0;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D1;
-                break;
-
-        case led_idle_end:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D1;
-                break;
-#endif
-        case led_green_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D2;
-                break;
-
-        case led_green_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D2;
-                break;
-
-        case led_amber_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D3;
-                break;
-
-        case led_amber_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D3;
-                break;
-
-        case led_red_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D1;
-                break;
-
-        case led_red_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D1;
-                break;
-
-        default:
-                break;
-        }
-
-        if  (led_state & LED_STATE_ENABLED) {
-                GPSR = hw_led_state;
-                GPCR = hw_led_state ^ LED_MASK;
-        }
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index 6a2352436e62..000000000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN    GPIO_GPIO23
-#define LED_RED    GPIO_GPIO22
-#define LED_MASK  (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-		case led_start:
-			/* pin 22/23 are outputs */
-			GPDR |= LED_MASK;
-			hw_led_state = LED_MASK;
-			led_state = LED_STATE_ENABLED;
-			break;
-
-		case led_stop:
-			led_state &= ~LED_STATE_ENABLED;
-			break;
-
-		case led_claim:
-			led_state |= LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-		case led_release:
-			led_state &= ~LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-#ifdef CONFIG_LEDS_TIMER
-		case led_timer:
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state ^= LED_GREEN;
-			break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-		case led_idle_start:
-			/* The LART people like the LED to be off when the
-			   system is idle... */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_idle_end:
-			/* ... and on if the system is not idle */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state |= LED_RED;
-			break;
-#endif
-
-		case led_red_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_red_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_RED;
-			break;
-
-		case led_green_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_GREEN;
-			break;
-
-		case led_green_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_GREEN;
-			break;
-
-		default:
-			break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index 50a5b143b460..000000000000
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- *   - GPIO23 is the LED, on if system is not idle
- *  You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- *  time, but in that case the timer events will still dictate the
- *  pace of the LED.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23    GPIO_GPIO23
-#define LED_MASK  (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:
-		/* pin 23 is output pin */
-		GPDR |= LED_23;
-		hw_led_state = LED_MASK;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = LED_MASK;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = LED_MASK;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= LED_23;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		/* The LART people like the LED to be off when the
-                   system is idle... */
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~LED_23;
-		break;
-
-	case led_idle_end:
-		/* ... and on if the system is not idle */
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= LED_23;
-		break;
-#endif
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~LED_23;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= LED_23;
-		break;
-
-	default:
-		break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0f1053..000000000000
--- a/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
-	if (machine_is_assabet())
-		leds_event = assabet_leds_event;
-	if (machine_is_consus())
-		leds_event = consus_leds_event;
-	if (machine_is_badge4())
-		leds_event = badge4_leds_event;
-	if (machine_is_brutus())
-		leds_event = brutus_leds_event;
-	if (machine_is_cerf())
-		leds_event = cerf_leds_event;
-	if (machine_is_flexanet())
-		leds_event = flexanet_leds_event;
-	if (machine_is_graphicsclient())
-		leds_event = graphicsclient_leds_event;
-	if (machine_is_hackkit())
-		leds_event = hackkit_leds_event;
-	if (machine_is_lart())
-		leds_event = lart_leds_event;
-	if (machine_is_pfs168())
-		leds_event = pfs168_leds_event;
-	if (machine_is_graphicsmaster())
-		leds_event = graphicsmaster_leds_event;
-	if (machine_is_adsbitsy())
-		leds_event = adsbitsy_leds_event;
-	if (machine_is_pt_system3())
-		leds_event = system3_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b6020f550..000000000000
--- a/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5d33fc3108ef..ff6b7b35bca9 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -19,7 +19,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
 #include <mach/shannon.h>
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index fbd53593be54..71790e581d93 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -24,7 +24,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
 #include <mach/simpad.h>
 #include <mach/irqs.h>
 
@@ -124,7 +124,7 @@ static struct map_desc simpad_io_desc[] __initdata = {
 		.length		= 0x00800000,
 		.type		= MT_DEVICE
 	}, {	/* Simpad CS3 */
-		.virtual	= CS3_BASE,
+		.virtual	= (unsigned long)CS3_BASE,
 		.pfn		= __phys_to_pfn(SA1100_CS3_PHYS),
 		.length		= 0x00100000,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
index 45be9b04e7ba..29657183c452 100644
--- a/arch/arm/mach-shark/Makefile
+++ b/arch/arm/mach-shark/Makefile
@@ -4,9 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= core.o dma.o irq.o pci.o
+obj-y			:= core.o dma.o irq.o pci.o leds.o
 obj-m			:=
 obj-n			:=
 obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 2704bcd869cd..9ad2e9737fb5 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -13,7 +13,6 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/param.h>
 #include <asm/system_misc.h>
 
@@ -21,9 +20,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#define IO_BASE                 0xe0000000
-#define IO_SIZE                 0x08000000
-#define IO_START                0x40000000
 #define ROMCARD_SIZE            0x08000000
 #define ROMCARD_START           0x10000000
 
@@ -104,20 +100,6 @@ arch_initcall(shark_init);
 
 extern void shark_init_irq(void);
 
-static struct map_desc shark_io_desc[] __initdata = {
-	{
-		.virtual	= IO_BASE,
-		.pfn		= __phys_to_pfn(IO_START),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init shark_map_io(void)
-{
-	iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
-}
-
 #define IRQ_TIMER 0
 #define HZ_TIME ((1193180 + HZ/2) / HZ)
 
@@ -158,7 +140,6 @@ static void shark_init_early(void)
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
 	.atag_offset	= 0x3000,
-	.map_io		= shark_map_io,
 	.init_early	= shark_init_early,
 	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 20eb2bf2a42b..d129119a3f69 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -12,9 +12,10 @@
 */
 
 		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0xe0000000
-		orr	\rp, \rp, #0x000003f8
-		mov	\rv, \rp
+		mov	\rp, #0x3f8
+		orr	\rv, \rp, #0xfe000000
+		orr	\rv, \rv, #0x00e00000
+		orr	\rp, \rp, #0x40000000
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
index 5901b09fc96a..c9e49f049532 100644
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -8,7 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xe0000000
+		mov	\base, #0xfe000000
+		orr	\base, \base, #0x00e00000
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
deleted file mode 100644
index 1a45fc01ff1d..000000000000
--- a/arch/arm/mach-shark/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)                 ((void __iomem *)(0xe0000000 + (a)))
-
-#endif
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 25609076921f..081c778a10ac 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,165 +1,117 @@
 /*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
  * DIGITAL Shark LED control routines.
  *
- * The leds use is as follows:
- *  - Green front - toggles state every 50 timer interrupts
- *  - Amber front - Unused, this is a dual color led (Amber/Green)
- *  - Amber back  - On if system is not idle
+ * Driver for the 3 user LEDs found on the Shark
+ * Based on Versatile and RealView machine LED code
  *
- * Changelog:
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
 #include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
-#include <asm/leds.h>
+#include <asm/mach-types.h>
 
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct shark_led {
+	struct led_classdev cdev;
+	u8 mask;
+};
 
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} shark_leds[] = {
+	{ "shark:amber0", "default-on", },	/* Bit 5 */
+	{ "shark:green", "heartbeat", },	/* Bit 6 */
+	{ "shark:amber1", "cpu0" },		/* Bit 7 */
+};
+
+static u16 led_reg_read(void)
+{
+	outw(0x09, 0x24);
+	return inw(0x26);
+}
 
-static char led_state;
-static short hw_led_state;
-static short saved_state;
+static void led_reg_write(u16 value)
+{
+	outw(0x09, 0x24);
+	outw(value, 0x26);
+}
 
-static DEFINE_RAW_SPINLOCK(leds_lock);
+static void shark_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct shark_led *led = container_of(cdev,
+						 struct shark_led, cdev);
+	u16 reg = led_reg_read();
 
-short sequoia_read(int addr) {
-  outw(addr,0x24);
-  return inw(0x26);
-}
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
 
-void sequoia_write(short value,short addr) {
-  outw(addr,0x24);
-  outw(value,0x26);
+	led_reg_write(reg);
 }
 
-static void sequoia_leds_event(led_event_t evt)
+static enum led_brightness shark_led_get(struct led_classdev *cdev)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
+	struct shark_led *led = container_of(cdev,
+						 struct shark_led, cdev);
+	u16 reg = led_reg_read();
 
-	hw_led_state = sequoia_read(0x09);
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
 
-	switch (evt) {
-	case led_start:
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
-		hw_led_state |= SEQUOIA_LED_BACK;
-#else
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		saved_state = hw_led_state;
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = saved_state;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= SEQUOIA_LED_GREEN;
-		break;
-#endif
+static int __init shark_leds_init(void)
+{
+	int i;
+	u16 reg;
 
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~SEQUOIA_LED_BACK;
-		break;
+	if (!machine_is_shark())
+		return -ENODEV;
 
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= SEQUOIA_LED_BACK;
-		break;
-#endif
+	for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
+		struct shark_led *led;
 
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_BACK;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_BACK;
-		break;
-
-	default:
-		break;
-	}
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
 
-	if  (led_state & LED_STATE_ENABLED)
-		sequoia_write(hw_led_state,0x09);
+		led->cdev.name = shark_leds[i].name;
+		led->cdev.brightness_set = shark_led_set;
+		led->cdev.brightness_get = shark_led_get;
+		led->cdev.default_trigger = shark_leds[i].trigger;
 
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-}
+		/* Count in 5 bits offset */
+		led->mask = BIT(i + 5);
 
-static int __init leds_init(void)
-{
-	extern void (*leds_event)(led_event_t);
-	short temp;
-	
-	leds_event = sequoia_leds_event;
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
 
 	/* Make LEDs independent of power-state */
-	request_region(0x24,4,"sequoia");
-	temp = sequoia_read(0x09);
-	temp |= 1<<10;
-	sequoia_write(temp,0x09);
-	leds_event(led_start);
+	request_region(0x24, 4, "led_reg");
+	reg = led_reg_read();
+	reg |= 1 << 10;
+	led_reg_write(reg);
+
 	return 0;
 }
 
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(shark_leds_init);
+#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
index 9089407d5326..b8b4ab323a3e 100644
--- a/arch/arm/mach-shark/pci.c
+++ b/arch/arm/mach-shark/pci.c
@@ -8,12 +8,15 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <video/vga.h>
 
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define IO_START	0x40000000
+
 static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->bus->number == 0)
@@ -44,6 +47,8 @@ static int __init shark_pci_init(void)
 	pcibios_min_mem = 0x50000000;
 	vga_base = 0xe8000000;
 
+	pci_ioremap_io(0, IO_START);
+
 	pci_common_init(&shark_pci);
 
 	return 0;
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 0df5ae6740c6..fe2c97c179d1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o common.o
+obj-y				:= timer.o console.o clock.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index d82c010fdfc6..25eb88a923e6 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -40,7 +40,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -650,6 +649,7 @@ static void __init ag5evm_init(void)
 }
 
 MACHINE_START(AG5EVM, "ag5evm")
+	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index f172ca85905c..790dc68c4312 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -66,6 +66,8 @@
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
+#include "sh-gpio.h"
+
 /*
  * Address	Interface		BusWidth	note
  * ------------------------------------------------------------------
@@ -432,7 +434,7 @@ static void usb1_host_port_power(int port, int power)
 		return;
 
 	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+	__raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008));
 }
 
 static struct r8a66597_platdata usb1_host_data = {
@@ -1224,11 +1226,20 @@ static struct i2c_board_info i2c1_devices[] = {
 };
 
 
-#define GPIO_PORT9CR	0xE6051009
-#define GPIO_PORT10CR	0xE605100A
-#define USCCR1		0xE6058144
+#define GPIO_PORT9CR	IOMEM(0xE6051009)
+#define GPIO_PORT10CR	IOMEM(0xE605100A)
+#define USCCR1		IOMEM(0xE6058144)
 static void __init ap4evb_init(void)
 {
+	struct pm_domain_device domain_devices[] = {
+		{ "A4LC", &lcdc1_device, },
+		{ "A4LC", &lcdc_device, },
+		{ "A4MP", &fsi_device, },
+		{ "A3SP", &sh_mmcif_device, },
+		{ "A3SP", &sdhi0_device, },
+		{ "A3SP", &sdhi1_device, },
+		{ "A4R", &ceu_device, },
+	};
 	u32 srcr4;
 	struct clk *clk;
 
@@ -1304,7 +1315,7 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_OVCN2_1,    NULL);
 
 	/* setup USB phy */
-	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR4 */
+	__raw_writew(0x8a0a, IOMEM(0xE6058130));	/* USBCR4 */
 
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
@@ -1453,7 +1464,7 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_HDMI_CEC, NULL);
 
 	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-#define SRCR4 0xe61580bc
+#define SRCR4 IOMEM(0xe61580bc)
 	srcr4 = __raw_readl(SRCR4);
 	__raw_writel(srcr4 | (1 << 13), SRCR4);
 	udelay(50);
@@ -1461,14 +1472,8 @@ static void __init ap4evb_init(void)
 
 	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
 
-	rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device);
-
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device);
+	rmobile_add_devices_to_domains(domain_devices,
+				       ARRAY_SIZE(domain_devices));
 
 	hdmi_init_pm_clock();
 	fsi_init_pm_clock();
@@ -1483,6 +1488,6 @@ MACHINE_START(AP4EVB, "ap4evb")
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
-	.init_late	= shmobile_init_late,
+	.init_late	= sh7372_pm_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index cf10f92856dc..2912eab3b967 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -37,6 +37,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/i2c-gpio.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7740.h>
@@ -54,6 +55,8 @@
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
 
+#include "sh-gpio.h"
+
 /*
  * CON1		Camera Module
  * CON2		Extension Bus
@@ -135,7 +138,7 @@
  *	usbhsf_power_ctrl()
  */
 #define IRQ7		evt2irq(0x02e0)
-#define USBCR1		0xe605810a
+#define USBCR1		IOMEM(0xe605810a)
 #define USBH		0xC6700000
 #define USBH_USBCTR	0x10834
 
@@ -520,13 +523,14 @@ static struct platform_device hdmi_lcdc_device = {
 };
 
 /* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
 
 static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
-	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
-	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
-	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW3", .wakeup = 1),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW4"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW5"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW6"),
 };
 
 static struct gpio_keys_platform_data gpio_key_info = {
@@ -876,6 +880,21 @@ static struct platform_device fsi_hdmi_device = {
 	},
 };
 
+/* RTC: RTC connects i2c-gpio. */
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin	= GPIO_PORT208,
+	.scl_pin	= GPIO_PORT91,
+	.udelay		= 5, /* 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name = "i2c-gpio",
+	.id = 2,
+	.dev = {
+		.platform_data = &i2c_gpio_data,
+	},
+};
+
 /* I2C */
 static struct i2c_board_info i2c0_devices[] = {
 	{
@@ -887,6 +906,13 @@ static struct i2c_board_info i2c0_devices[] = {
 	},
 };
 
+static struct i2c_board_info i2c2_devices[] = {
+	{
+		I2C_BOARD_INFO("s35390a", 0x30),
+		.type = "s35390a",
+	},
+};
+
 /*
  * board devices
  */
@@ -901,8 +927,9 @@ static struct platform_device *eva_devices[] __initdata = {
 	&camera_device,
 	&ceu0_device,
 	&fsi_device,
-	&fsi_hdmi_device,
 	&fsi_wm8978_device,
+	&fsi_hdmi_device,
+	&i2c_gpio_device,
 };
 
 static void __init eva_clock_init(void)
@@ -949,8 +976,8 @@ clock_error:
 /*
  * board init
  */
-#define GPIO_PORT7CR	0xe6050007
-#define GPIO_PORT8CR	0xe6050008
+#define GPIO_PORT7CR	IOMEM(0xe6050007)
+#define GPIO_PORT8CR	IOMEM(0xe6050008)
 static void __init eva_init(void)
 {
 	struct platform_device *usb = NULL;
@@ -1173,6 +1200,7 @@ static void __init eva_init(void)
 #endif
 
 	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+	i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
 
 	r8a7740_add_standard_devices();
 
@@ -1181,10 +1209,10 @@ static void __init eva_init(void)
 
 	eva_clock_init();
 
-	rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &lcdc0_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &hdmi_lcdc_device);
+	rmobile_add_device_to_domain("A4LC", &lcdc0_device);
+	rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
 	if (usb)
-		rmobile_add_device_to_domain(&r8a7740_pd_a3sp, usb);
+		rmobile_add_device_to_domain("A3SP", usb);
 }
 
 static void __init eva_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 4129008eae29..cb8c994e1430 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -108,12 +108,12 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 #define FPGA_ETH_IRQ		(FPGA_IRQ0 + 15)
 static u16 bonito_fpga_read(u32 offset)
 {
-	return __raw_readw(0xf0003000 + offset);
+	return __raw_readw(IOMEM(0xf0003000) + offset);
 }
 
 static void bonito_fpga_write(u32 offset, u16 val)
 {
-	__raw_writew(val, 0xf0003000 + offset);
+	__raw_writew(val, IOMEM(0xf0003000) + offset);
 }
 
 static void bonito_fpga_irq_disable(struct irq_data *data)
@@ -361,8 +361,8 @@ static void __init bonito_map_io(void)
 #define BIT_ON(sw, bit)		(sw & (1 << bit))
 #define BIT_OFF(sw, bit)	(!(sw & (1 << bit)))
 
-#define VCCQ1CR		0xE6058140
-#define VCCQ1LCDCR	0xE6058186
+#define VCCQ1CR		IOMEM(0xE6058140)
+#define VCCQ1LCDCR	IOMEM(0xE6058186)
 
 static void __init bonito_init(void)
 {
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 796fa00ad3c4..b179d4c213bb 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -106,7 +106,7 @@ static void usb_host_port_power(int port, int power)
 		return;
 
 	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+	__raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
 }
 
 static struct r8a66597_platdata usb_host_data = {
@@ -279,10 +279,10 @@ static void __init g3evm_init(void)
 	gpio_request(GPIO_FN_IDIN, NULL);
 
 	/* setup USB phy */
-	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
-	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
-	__raw_writew(0x6010, 0xe60581c6);	/* CGPOSR */
-	__raw_writew(0x8a0a, 0xe605810c);	/* USBCR2 */
+	__raw_writew(0x0300, IOMEM(0xe605810a));	/* USBCR1 */
+	__raw_writew(0x00e0, IOMEM(0xe60581c0));	/* CPFCH */
+	__raw_writew(0x6010, IOMEM(0xe60581c6));	/* CGPOSR */
+	__raw_writew(0x8a0a, IOMEM(0xe605810c));	/* USBCR2 */
 
 	/* KEYSC @ CN7 */
 	gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
@@ -320,7 +320,7 @@ static void __init g3evm_init(void)
 	gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
 	gpio_request(GPIO_FN_FRB, NULL);
 	/* FOE, FCDE, FSC on dedicated pins */
-	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
+	__raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048));
 
 	/* IrDA */
 	gpio_request(GPIO_FN_IRDA_OUT, NULL);
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index fa5dfc5c8ed6..35c126caa4d8 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -42,6 +42,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "sh-gpio.h"
+
 /*
  * SDHI
  *
@@ -126,7 +128,7 @@ static void usb_host_port_power(int port, int power)
 		return;
 
 	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+	__raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
 }
 
 static struct r8a66597_platdata usb_host_data = {
@@ -270,17 +272,17 @@ static struct platform_device *g4evm_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-#define GPIO_SDHID0_D0	0xe60520fc
-#define GPIO_SDHID0_D1	0xe60520fd
-#define GPIO_SDHID0_D2	0xe60520fe
-#define GPIO_SDHID0_D3	0xe60520ff
-#define GPIO_SDHICMD0	0xe6052100
+#define GPIO_SDHID0_D0	IOMEM(0xe60520fc)
+#define GPIO_SDHID0_D1	IOMEM(0xe60520fd)
+#define GPIO_SDHID0_D2	IOMEM(0xe60520fe)
+#define GPIO_SDHID0_D3	IOMEM(0xe60520ff)
+#define GPIO_SDHICMD0	IOMEM(0xe6052100)
 
-#define GPIO_SDHID1_D0	0xe6052103
-#define GPIO_SDHID1_D1	0xe6052104
-#define GPIO_SDHID1_D2	0xe6052105
-#define GPIO_SDHID1_D3	0xe6052106
-#define GPIO_SDHICMD1	0xe6052107
+#define GPIO_SDHID1_D0	IOMEM(0xe6052103)
+#define GPIO_SDHID1_D1	IOMEM(0xe6052104)
+#define GPIO_SDHID1_D2	IOMEM(0xe6052105)
+#define GPIO_SDHID1_D3	IOMEM(0xe6052106)
+#define GPIO_SDHICMD1	IOMEM(0xe6052107)
 
 static void __init g4evm_init(void)
 {
@@ -318,10 +320,10 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_IDIN, NULL);
 
 	/* setup USB phy */
-	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
-	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
-	__raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
-	__raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
+	__raw_writew(0x0200, IOMEM(0xe605810a));       /* USBCR1 */
+	__raw_writew(0x00e0, IOMEM(0xe60581c0));       /* CPFCH */
+	__raw_writew(0x6010, IOMEM(0xe60581c6));       /* CGPOSR */
+	__raw_writew(0x8a0a, IOMEM(0xe605810c));       /* USBCR2 */
 
 	/* KEYSC @ CN31 */
 	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 21dbe54304d5..bf88f9a8b7ac 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -545,6 +545,7 @@ static void __init kota2_init(void)
 }
 
 MACHINE_START(KOTA2, "kota2")
+	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 2c986eaae7b4..b52bc0d1273f 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -84,6 +84,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
 	.init_early	= emev2_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 53b7ea92c32c..0a43f3189c21 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -133,8 +133,8 @@ static struct platform_device usb_host_device = {
 
 /* USB Func CN17 */
 struct usbhs_private {
-	unsigned int phy;
-	unsigned int cr2;
+	void __iomem *phy;
+	void __iomem *cr2;
 	struct renesas_usbhs_platform_info info;
 };
 
@@ -232,8 +232,8 @@ static u32 usbhs_pipe_cfg[] = {
 };
 
 static struct usbhs_private usbhs_private = {
-	.phy	= 0xe60781e0,		/* USBPHYINT */
-	.cr2	= 0xe605810c,		/* USBCR2 */
+	.phy	= IOMEM(0xe60781e0),		/* USBPHYINT */
+	.cr2	= IOMEM(0xe605810c),		/* USBCR2 */
 	.info = {
 		.platform_callback = {
 			.hardware_init	= usbhs_hardware_init,
@@ -346,11 +346,11 @@ static struct resource sh_mmcif_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gic_spi(141),
+		.start	= gic_spi(140),
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
-		.start	= gic_spi(140),
+		.start	= gic_spi(141),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -482,12 +482,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons	= gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-	.poll_interval	= 250, /* poling at this point */
 };
 
 static struct platform_device gpio_keys_device = {
-	/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
-	.name	= "gpio-keys-polled",
+	.name	= "gpio-keys",
 	.dev	= {
 		.platform_data  = &gpio_key_info,
 	},
@@ -550,6 +548,7 @@ static struct platform_device fsi_ak4648_device = {
 /* I2C */
 static struct pcf857x_platform_data pcf8575_pdata = {
 	.gpio_base	= GPIO_PCF8575_BASE,
+	.irq		= intcs_evt2irq(0x3260), /* IRQ19 */
 };
 
 static struct i2c_board_info i2c0_devices[] = {
@@ -763,12 +762,20 @@ static void __init kzm_init(void)
 	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
 }
 
+static void kzm9g_restart(char mode, const char *cmd)
+{
+#define RESCNT2 IOMEM(0xe6188020)
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
 static const char *kzm9g_boards_compat_dt[] __initdata = {
 	"renesas,kzm9g",
 	NULL,
 };
 
 DT_MACHINE_START(KZM9G_DT, "kzm9g")
+	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
@@ -777,5 +784,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g")
 	.init_machine	= kzm_init,
 	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
+	.restart	= kzm9g_restart,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 7ea2b31e3199..0c27c810cf99 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -64,6 +64,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include "sh-gpio.h"
+
 /*
  * Address	Interface		BusWidth	note
  * ------------------------------------------------------------------
@@ -583,8 +585,8 @@ out:
 #define USBHS0_POLL_INTERVAL (HZ * 5)
 
 struct usbhs_private {
-	unsigned int usbphyaddr;
-	unsigned int usbcrcaddr;
+	void __iomem *usbphyaddr;
+	void __iomem *usbcrcaddr;
 	struct renesas_usbhs_platform_info info;
 	struct delayed_work work;
 	struct platform_device *pdev;
@@ -642,7 +644,7 @@ static void usbhs0_hardware_exit(struct platform_device *pdev)
 }
 
 static struct usbhs_private usbhs0_private = {
-	.usbcrcaddr	= 0xe605810c,		/* USBCR2 */
+	.usbcrcaddr	= IOMEM(0xe605810c),		/* USBCR2 */
 	.info = {
 		.platform_callback = {
 			.hardware_init	= usbhs0_hardware_init,
@@ -695,6 +697,7 @@ static struct platform_device usbhs0_device = {
  *  - J30 "open"
  *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
  *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
  */
 #define IRQ8 evt2irq(0x0300)
 #define USB_PHY_MODE		(1 << 4)
@@ -775,8 +778,8 @@ static u32 usbhs1_pipe_cfg[] = {
 };
 
 static struct usbhs_private usbhs1_private = {
-	.usbphyaddr	= 0xe60581e2,		/* USBPHY1INTAP */
-	.usbcrcaddr	= 0xe6058130,		/* USBCR4 */
+	.usbphyaddr	= IOMEM(0xe60581e2),	/* USBPHY1INTAP */
+	.usbcrcaddr	= IOMEM(0xe6058130),	/* USBCR4 */
 	.info = {
 		.platform_callback = {
 			.hardware_init	= usbhs1_hardware_init,
@@ -1325,8 +1328,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs1_device,
 	&usbhs0_device,
+	&usbhs1_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,
@@ -1401,14 +1404,30 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
-#define GPIO_PORT9CR	0xE6051009
-#define GPIO_PORT10CR	0xE605100A
-#define GPIO_PORT167CR	0xE60520A7
-#define GPIO_PORT168CR	0xE60520A8
-#define SRCR4		0xe61580bc
-#define USCCR1		0xE6058144
+#define GPIO_PORT9CR	IOMEM(0xE6051009)
+#define GPIO_PORT10CR	IOMEM(0xE605100A)
+#define GPIO_PORT167CR	IOMEM(0xE60520A7)
+#define GPIO_PORT168CR	IOMEM(0xE60520A8)
+#define SRCR4		IOMEM(0xe61580bc)
+#define USCCR1		IOMEM(0xE6058144)
 static void __init mackerel_init(void)
 {
+	struct pm_domain_device domain_devices[] = {
+		{ "A4LC", &lcdc_device, },
+		{ "A4LC", &hdmi_lcdc_device, },
+		{ "A4LC", &meram_device, },
+		{ "A4MP", &fsi_device, },
+		{ "A3SP", &usbhs0_device, },
+		{ "A3SP", &usbhs1_device, },
+		{ "A3SP", &nand_flash_device, },
+		{ "A3SP", &sh_mmcif_device, },
+		{ "A3SP", &sdhi0_device, },
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+		{ "A3SP", &sdhi1_device, },
+#endif
+		{ "A3SP", &sdhi2_device, },
+		{ "A4R", &ceu_device, },
+	};
 	u32 srcr4;
 	struct clk *clk;
 
@@ -1623,20 +1642,8 @@ static void __init mackerel_init(void)
 
 	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
 
-	rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4lc, &hdmi_lcdc_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4lc, &meram_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &nand_flash_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device);
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device);
-#endif
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi2_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device);
+	rmobile_add_devices_to_domains(domain_devices,
+				       ARRAY_SIZE(domain_devices));
 
 	hdmi_init_pm_clock();
 	sh7372_pm_init();
@@ -1650,6 +1657,6 @@ MACHINE_START(MACKEREL, "mackerel")
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
-	.init_late	= shmobile_init_late,
+	.init_late	= sh7372_pm_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 3a528cf4366c..b8a7525a4e2f 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -39,6 +41,12 @@
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
@@ -67,7 +75,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 
 static struct platform_device eth_device = {
 	.name		= "smsc911x",
-	.id		= 0,
+	.id		= -1,
 	.dev  = {
 		.platform_data = &smsc911x_platdata,
 	},
@@ -75,13 +83,61 @@ static struct platform_device eth_device = {
 	.num_resources	= ARRAY_SIZE(smsc911x_resources),
 };
 
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "sdhi0",
+		.start	= 0xffe4c000,
+		.end	= 0xffe4c0ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(104),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mobile_sdhi_info sdhi0_platform_data = {
+	.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps = MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct platform_device sdhi0_device = {
+	.name = "sh_mobile_sdhi",
+	.num_resources = ARRAY_SIZE(sdhi0_resources),
+	.resource = sdhi0_resources,
+	.id = 0,
+	.dev = {
+		.platform_data = &sdhi0_platform_data,
+	}
+};
+
+/* Thermal */
+static struct resource thermal_resources[] = {
+	[0] = {
+		.start		= 0xFFC48000,
+		.end		= 0xFFC48038 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device thermal_device = {
+	.name		= "rcar_thermal",
+	.resource	= thermal_resources,
+	.num_resources	= ARRAY_SIZE(thermal_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
+	&sdhi0_device,
+	&thermal_device,
 };
 
 static void __init marzen_init(void)
 {
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(1, dummy_supplies,
+				ARRAY_SIZE(dummy_supplies));
 
 	r8a7779_pinmux_init();
 
@@ -97,11 +153,22 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
 	gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
 
+	/* SD0 (CN20) */
+	gpio_request(GPIO_FN_SD0_CLK, NULL);
+	gpio_request(GPIO_FN_SD0_CMD, NULL);
+	gpio_request(GPIO_FN_SD0_DAT0, NULL);
+	gpio_request(GPIO_FN_SD0_DAT1, NULL);
+	gpio_request(GPIO_FN_SD0_DAT2, NULL);
+	gpio_request(GPIO_FN_SD0_DAT3, NULL);
+	gpio_request(GPIO_FN_SD0_CD, NULL);
+	gpio_request(GPIO_FN_SD0_WP, NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 
 MACHINE_START(MARZEN, "marzen")
+	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
 	.init_early	= r8a7779_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index ad5fccc7b5e7..6729e0032180 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -41,29 +41,29 @@
  */
 
 /* CPG registers */
-#define FRQCRA		0xe6150000
-#define FRQCRB		0xe6150004
-#define VCLKCR1		0xE6150008
-#define VCLKCR2		0xE615000c
-#define FRQCRC		0xe61500e0
-#define FSIACKCR	0xe6150018
-#define PLLC01CR	0xe6150028
-
-#define SUBCKCR		0xe6150080
-#define USBCKCR		0xe615008c
-
-#define MSTPSR0		0xe6150030
-#define MSTPSR1		0xe6150038
-#define MSTPSR2		0xe6150040
-#define MSTPSR3		0xe6150048
-#define MSTPSR4		0xe615004c
-#define FSIBCKCR	0xe6150090
-#define HDMICKCR	0xe6150094
-#define SMSTPCR0	0xe6150130
-#define SMSTPCR1	0xe6150134
-#define SMSTPCR2	0xe6150138
-#define SMSTPCR3	0xe615013c
-#define SMSTPCR4	0xe6150140
+#define FRQCRA		IOMEM(0xe6150000)
+#define FRQCRB		IOMEM(0xe6150004)
+#define VCLKCR1		IOMEM(0xE6150008)
+#define VCLKCR2		IOMEM(0xE615000c)
+#define FRQCRC		IOMEM(0xe61500e0)
+#define FSIACKCR	IOMEM(0xe6150018)
+#define PLLC01CR	IOMEM(0xe6150028)
+
+#define SUBCKCR		IOMEM(0xe6150080)
+#define USBCKCR		IOMEM(0xe615008c)
+
+#define MSTPSR0		IOMEM(0xe6150030)
+#define MSTPSR1		IOMEM(0xe6150038)
+#define MSTPSR2		IOMEM(0xe6150040)
+#define MSTPSR3		IOMEM(0xe6150048)
+#define MSTPSR4		IOMEM(0xe615004c)
+#define FSIBCKCR	IOMEM(0xe6150090)
+#define HDMICKCR	IOMEM(0xe6150094)
+#define SMSTPCR0	IOMEM(0xe6150130)
+#define SMSTPCR1	IOMEM(0xe6150134)
+#define SMSTPCR2	IOMEM(0xe6150138)
+#define SMSTPCR3	IOMEM(0xe615013c)
+#define SMSTPCR4	IOMEM(0xe6150140)
 
 /* Fixed 32 KHz root clock from EXTALR pin */
 static struct clk extalr_clk = {
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 339c62c824d5..3cafb6ab5e9a 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -86,11 +86,16 @@ static struct clk div4_clks[DIV4_NR] = {
 				      0x0300, CLK_ENABLE_ON_INIT),
 };
 
-enum { MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
+enum { MSTP323, MSTP322, MSTP321, MSTP320,
+	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */
+	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
+	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
 	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
 	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
 	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
@@ -149,6 +154,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
 };
 
 void __init r8a7779_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index 162b791b8984..ef0a95e592c4 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -24,28 +24,28 @@
 #include <mach/common.h>
 
 /* SH7367 registers */
-#define RTFRQCR    0xe6150000
-#define SYFRQCR    0xe6150004
-#define CMFRQCR    0xe61500E0
-#define VCLKCR1    0xe6150008
-#define VCLKCR2    0xe615000C
-#define VCLKCR3    0xe615001C
-#define SCLKACR    0xe6150010
-#define SCLKBCR    0xe6150014
-#define SUBUSBCKCR 0xe6158080
-#define SPUCKCR    0xe6150084
-#define MSUCKCR    0xe6150088
-#define MVI3CKCR   0xe6150090
-#define VOUCKCR    0xe6150094
-#define MFCK1CR    0xe6150098
-#define MFCK2CR    0xe615009C
-#define PLLC1CR    0xe6150028
-#define PLLC2CR    0xe615002C
-#define RTMSTPCR0  0xe6158030
-#define RTMSTPCR2  0xe6158038
-#define SYMSTPCR0  0xe6158040
-#define SYMSTPCR2  0xe6158048
-#define CMMSTPCR0  0xe615804c
+#define RTFRQCR    IOMEM(0xe6150000)
+#define SYFRQCR    IOMEM(0xe6150004)
+#define CMFRQCR    IOMEM(0xe61500E0)
+#define VCLKCR1    IOMEM(0xe6150008)
+#define VCLKCR2    IOMEM(0xe615000C)
+#define VCLKCR3    IOMEM(0xe615001C)
+#define SCLKACR    IOMEM(0xe6150010)
+#define SCLKBCR    IOMEM(0xe6150014)
+#define SUBUSBCKCR IOMEM(0xe6158080)
+#define SPUCKCR    IOMEM(0xe6150084)
+#define MSUCKCR    IOMEM(0xe6150088)
+#define MVI3CKCR   IOMEM(0xe6150090)
+#define VOUCKCR    IOMEM(0xe6150094)
+#define MFCK1CR    IOMEM(0xe6150098)
+#define MFCK2CR    IOMEM(0xe615009C)
+#define PLLC1CR    IOMEM(0xe6150028)
+#define PLLC2CR    IOMEM(0xe615002C)
+#define RTMSTPCR0  IOMEM(0xe6158030)
+#define RTMSTPCR2  IOMEM(0xe6158038)
+#define SYMSTPCR0  IOMEM(0xe6158040)
+#define SYMSTPCR2  IOMEM(0xe6158048)
+#define CMMSTPCR0  IOMEM(0xe615804c)
 
 /* Fixed 32 KHz root clock from EXTALR pin */
 static struct clk r_clk = {
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 5a2894b1c965..430a90ffa120 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -24,36 +24,36 @@
 #include <mach/common.h>
 
 /* SH7372 registers */
-#define FRQCRA		0xe6150000
-#define FRQCRB		0xe6150004
-#define FRQCRC		0xe61500e0
-#define FRQCRD		0xe61500e4
-#define VCLKCR1		0xe6150008
-#define VCLKCR2		0xe615000c
-#define VCLKCR3		0xe615001c
-#define FMSICKCR	0xe6150010
-#define FMSOCKCR	0xe6150014
-#define FSIACKCR	0xe6150018
-#define FSIBCKCR	0xe6150090
-#define SUBCKCR		0xe6150080
-#define SPUCKCR		0xe6150084
-#define VOUCKCR		0xe6150088
-#define HDMICKCR	0xe6150094
-#define DSITCKCR	0xe6150060
-#define DSI0PCKCR	0xe6150064
-#define DSI1PCKCR	0xe6150098
-#define PLLC01CR	0xe6150028
-#define PLLC2CR		0xe615002c
-#define RMSTPCR0	0xe6150110
-#define RMSTPCR1	0xe6150114
-#define RMSTPCR2	0xe6150118
-#define RMSTPCR3	0xe615011c
-#define RMSTPCR4	0xe6150120
-#define SMSTPCR0	0xe6150130
-#define SMSTPCR1	0xe6150134
-#define SMSTPCR2	0xe6150138
-#define SMSTPCR3	0xe615013c
-#define SMSTPCR4	0xe6150140
+#define FRQCRA		IOMEM(0xe6150000)
+#define FRQCRB		IOMEM(0xe6150004)
+#define FRQCRC		IOMEM(0xe61500e0)
+#define FRQCRD		IOMEM(0xe61500e4)
+#define VCLKCR1		IOMEM(0xe6150008)
+#define VCLKCR2		IOMEM(0xe615000c)
+#define VCLKCR3		IOMEM(0xe615001c)
+#define FMSICKCR	IOMEM(0xe6150010)
+#define FMSOCKCR	IOMEM(0xe6150014)
+#define FSIACKCR	IOMEM(0xe6150018)
+#define FSIBCKCR	IOMEM(0xe6150090)
+#define SUBCKCR		IOMEM(0xe6150080)
+#define SPUCKCR		IOMEM(0xe6150084)
+#define VOUCKCR		IOMEM(0xe6150088)
+#define HDMICKCR	IOMEM(0xe6150094)
+#define DSITCKCR	IOMEM(0xe6150060)
+#define DSI0PCKCR	IOMEM(0xe6150064)
+#define DSI1PCKCR	IOMEM(0xe6150098)
+#define PLLC01CR	IOMEM(0xe6150028)
+#define PLLC2CR		IOMEM(0xe615002c)
+#define RMSTPCR0	IOMEM(0xe6150110)
+#define RMSTPCR1	IOMEM(0xe6150114)
+#define RMSTPCR2	IOMEM(0xe6150118)
+#define RMSTPCR3	IOMEM(0xe615011c)
+#define RMSTPCR4	IOMEM(0xe6150120)
+#define SMSTPCR0	IOMEM(0xe6150130)
+#define SMSTPCR1	IOMEM(0xe6150134)
+#define SMSTPCR2	IOMEM(0xe6150138)
+#define SMSTPCR3	IOMEM(0xe615013c)
+#define SMSTPCR4	IOMEM(0xe6150140)
 
 #define FSIDIVA		0xFE1F8000
 #define FSIDIVB		0xFE1F8008
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index 85f2a3ec2c44..b8480d19e1c8 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -24,31 +24,31 @@
 #include <mach/common.h>
 
 /* SH7377 registers */
-#define RTFRQCR    0xe6150000
-#define SYFRQCR    0xe6150004
-#define CMFRQCR    0xe61500E0
-#define VCLKCR1    0xe6150008
-#define VCLKCR2    0xe615000C
-#define VCLKCR3    0xe615001C
-#define FMSICKCR   0xe6150010
-#define FMSOCKCR   0xe6150014
-#define FSICKCR    0xe6150018
-#define PLLC1CR    0xe6150028
-#define PLLC2CR    0xe615002C
-#define SUBUSBCKCR 0xe6150080
-#define SPUCKCR    0xe6150084
-#define MSUCKCR    0xe6150088
-#define MVI3CKCR   0xe6150090
-#define HDMICKCR   0xe6150094
-#define MFCK1CR    0xe6150098
-#define MFCK2CR    0xe615009C
-#define DSITCKCR   0xe6150060
-#define DSIPCKCR   0xe6150064
-#define SMSTPCR0   0xe6150130
-#define SMSTPCR1   0xe6150134
-#define SMSTPCR2   0xe6150138
-#define SMSTPCR3   0xe615013C
-#define SMSTPCR4   0xe6150140
+#define RTFRQCR    IOMEM(0xe6150000)
+#define SYFRQCR    IOMEM(0xe6150004)
+#define CMFRQCR    IOMEM(0xe61500E0)
+#define VCLKCR1    IOMEM(0xe6150008)
+#define VCLKCR2    IOMEM(0xe615000C)
+#define VCLKCR3    IOMEM(0xe615001C)
+#define FMSICKCR   IOMEM(0xe6150010)
+#define FMSOCKCR   IOMEM(0xe6150014)
+#define FSICKCR    IOMEM(0xe6150018)
+#define PLLC1CR    IOMEM(0xe6150028)
+#define PLLC2CR    IOMEM(0xe615002C)
+#define SUBUSBCKCR IOMEM(0xe6150080)
+#define SPUCKCR    IOMEM(0xe6150084)
+#define MSUCKCR    IOMEM(0xe6150088)
+#define MVI3CKCR   IOMEM(0xe6150090)
+#define HDMICKCR   IOMEM(0xe6150094)
+#define MFCK1CR    IOMEM(0xe6150098)
+#define MFCK2CR    IOMEM(0xe615009C)
+#define DSITCKCR   IOMEM(0xe6150060)
+#define DSIPCKCR   IOMEM(0xe6150064)
+#define SMSTPCR0   IOMEM(0xe6150130)
+#define SMSTPCR1   IOMEM(0xe6150134)
+#define SMSTPCR2   IOMEM(0xe6150138)
+#define SMSTPCR3   IOMEM(0xe615013C)
+#define SMSTPCR4   IOMEM(0xe6150140)
 
 /* Fixed 32 KHz root clock from EXTALR pin */
 static struct clk r_clk = {
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 7f8da18a8580..516ff7f3e434 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -23,43 +23,43 @@
 #include <linux/clkdev.h>
 #include <mach/common.h>
 
-#define FRQCRA		0xe6150000
-#define FRQCRB		0xe6150004
-#define FRQCRD		0xe61500e4
-#define VCLKCR1		0xe6150008
-#define VCLKCR2		0xe615000C
-#define VCLKCR3		0xe615001C
-#define ZBCKCR		0xe6150010
-#define FLCKCR		0xe6150014
-#define SD0CKCR		0xe6150074
-#define SD1CKCR		0xe6150078
-#define SD2CKCR		0xe615007C
-#define FSIACKCR	0xe6150018
-#define FSIBCKCR	0xe6150090
-#define SUBCKCR		0xe6150080
-#define SPUACKCR	0xe6150084
-#define SPUVCKCR	0xe6150094
-#define MSUCKCR		0xe6150088
-#define HSICKCR		0xe615008C
-#define MFCK1CR		0xe6150098
-#define MFCK2CR		0xe615009C
-#define DSITCKCR	0xe6150060
-#define DSI0PCKCR	0xe6150064
-#define DSI1PCKCR	0xe6150068
+#define FRQCRA		IOMEM(0xe6150000)
+#define FRQCRB		IOMEM(0xe6150004)
+#define FRQCRD		IOMEM(0xe61500e4)
+#define VCLKCR1		IOMEM(0xe6150008)
+#define VCLKCR2		IOMEM(0xe615000C)
+#define VCLKCR3		IOMEM(0xe615001C)
+#define ZBCKCR		IOMEM(0xe6150010)
+#define FLCKCR		IOMEM(0xe6150014)
+#define SD0CKCR		IOMEM(0xe6150074)
+#define SD1CKCR		IOMEM(0xe6150078)
+#define SD2CKCR		IOMEM(0xe615007C)
+#define FSIACKCR	IOMEM(0xe6150018)
+#define FSIBCKCR	IOMEM(0xe6150090)
+#define SUBCKCR		IOMEM(0xe6150080)
+#define SPUACKCR	IOMEM(0xe6150084)
+#define SPUVCKCR	IOMEM(0xe6150094)
+#define MSUCKCR		IOMEM(0xe6150088)
+#define HSICKCR		IOMEM(0xe615008C)
+#define MFCK1CR		IOMEM(0xe6150098)
+#define MFCK2CR		IOMEM(0xe615009C)
+#define DSITCKCR	IOMEM(0xe6150060)
+#define DSI0PCKCR	IOMEM(0xe6150064)
+#define DSI1PCKCR	IOMEM(0xe6150068)
 #define DSI0PHYCR	0xe615006C
 #define DSI1PHYCR	0xe6150070
-#define PLLECR		0xe61500d0
-#define PLL0CR		0xe61500d8
-#define PLL1CR		0xe6150028
-#define PLL2CR		0xe615002c
-#define PLL3CR		0xe61500dc
-#define SMSTPCR0	0xe6150130
-#define SMSTPCR1	0xe6150134
-#define SMSTPCR2	0xe6150138
-#define SMSTPCR3	0xe615013c
-#define SMSTPCR4	0xe6150140
-#define SMSTPCR5	0xe6150144
-#define CKSCR		0xe61500c0
+#define PLLECR		IOMEM(0xe61500d0)
+#define PLL0CR		IOMEM(0xe61500d8)
+#define PLL1CR		IOMEM(0xe6150028)
+#define PLL2CR		IOMEM(0xe615002c)
+#define PLL3CR		IOMEM(0xe61500dc)
+#define SMSTPCR0	IOMEM(0xe6150130)
+#define SMSTPCR1	IOMEM(0xe6150134)
+#define SMSTPCR2	IOMEM(0xe6150138)
+#define SMSTPCR3	IOMEM(0xe615013c)
+#define SMSTPCR4	IOMEM(0xe6150140)
+#define SMSTPCR5	IOMEM(0xe6150144)
+#define CKSCR		IOMEM(0xe61500c0)
 
 /* Fixed 32 KHz root clock from EXTALR pin */
 static struct clk r_clk = {
diff --git a/arch/arm/mach-shmobile/common.c b/arch/arm/mach-shmobile/common.c
deleted file mode 100644
index 608aba9d60d7..000000000000
--- a/arch/arm/mach-shmobile/common.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <mach/common.h>
-
-void __init shmobile_init_late(void)
-{
-	shmobile_suspend_init();
-	shmobile_cpuidle_init();
-}
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 7b541e911ab4..9e050268cde4 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -16,51 +16,38 @@
 #include <asm/cpuidle.h>
 #include <asm/io.h>
 
-static void shmobile_enter_wfi(void)
+int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv,
+		       int index)
 {
 	cpu_do_idle();
-}
-
-void (*shmobile_cpuidle_modes[CPUIDLE_STATE_MAX])(void) = {
-	shmobile_enter_wfi, /* regular sleep mode */
-};
-
-static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
-				  struct cpuidle_driver *drv,
-				  int index)
-{
-	shmobile_cpuidle_modes[index]();
-
-	return index;
+	return 0;
 }
 
 static struct cpuidle_device shmobile_cpuidle_dev;
-static struct cpuidle_driver shmobile_cpuidle_driver = {
+static struct cpuidle_driver shmobile_cpuidle_default_driver = {
 	.name			= "shmobile_cpuidle",
 	.owner			= THIS_MODULE,
 	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
+	.states[0].enter	= shmobile_enter_wfi,
 	.safe_state_index	= 0, /* C1 */
 	.state_count		= 1,
 };
 
-void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
+static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver;
+
+void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv)
+{
+	cpuidle_drv = drv;
+}
 
 int shmobile_cpuidle_init(void)
 {
 	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
-	int i;
-
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++)
-		drv->states[i].enter = shmobile_cpuidle_enter;
-
-	if (shmobile_cpuidle_setup)
-		shmobile_cpuidle_setup(drv);
 
-	cpuidle_register_driver(drv);
+	cpuidle_register_driver(cpuidle_drv);
 
-	dev->state_count = drv->state_count;
+	dev->state_count = cpuidle_drv->state_count;
 	cpuidle_register_device(dev);
 
 	return 0;
diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c
index 828d22f3af57..b09a0bdbf813 100644
--- a/arch/arm/mach-shmobile/hotplug.c
+++ b/arch/arm/mach-shmobile/hotplug.c
@@ -14,30 +14,16 @@
 #include <linux/smp.h>
 #include <linux/cpumask.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <mach/common.h>
+#include <mach/r8a7779.h>
+#include <mach/emev2.h>
 #include <asm/cacheflush.h>
+#include <asm/mach-types.h>
 
 static cpumask_t dead_cpus;
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	int k;
-
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
-	 */
-	for (k = 0; k < 1000; k++) {
-		if (cpumask_test_cpu(cpu, &dead_cpus))
-			return shmobile_platform_cpu_kill(cpu);
-
-		mdelay(1);
-	}
-
-	return 0;
-}
-
-void platform_cpu_die(unsigned int cpu)
+void shmobile_cpu_die(unsigned int cpu)
 {
 	/* hardware shutdown code running on the CPU that is being offlined */
 	flush_cache_all();
@@ -60,7 +46,7 @@ void platform_cpu_die(unsigned int cpu)
 	}
 }
 
-int platform_cpu_disable(unsigned int cpu)
+int shmobile_cpu_disable(unsigned int cpu)
 {
 	cpumask_clear_cpu(cpu, &dead_cpus);
 	/*
@@ -69,3 +55,8 @@ int platform_cpu_disable(unsigned int cpu)
 	 */
 	return cpu == 0 ? -EPERM : 0;
 }
+
+int shmobile_cpu_is_dead(unsigned int cpu)
+{
+	return cpumask_test_cpu(cpu, &dead_cpus);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 45e61dada030..ed77ab8c9143 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -4,18 +4,19 @@
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
-				 unsigned int mult, unsigned int div);
+			 unsigned int mult, unsigned int div);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
-extern int shmobile_platform_cpu_kill(unsigned int cpu);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
-extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
+struct cpuidle_device;
+extern int shmobile_enter_wfi(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int index);
+extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_map_io(void);
@@ -58,11 +59,6 @@ extern struct clk sh73a0_extal2_clk;
 extern struct clk sh73a0_extcki_clk;
 extern struct clk sh73a0_extalr_clk;
 
-extern unsigned int sh73a0_get_core_count(void);
-extern void sh73a0_secondary_init(unsigned int cpu);
-extern int sh73a0_boot_secondary(unsigned int cpu);
-extern void sh73a0_smp_prepare_cpus(void);
-
 extern void r8a7740_init_irq(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
@@ -79,15 +75,8 @@ extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
 extern void r8a7740_meram_workaround(void);
 
-extern unsigned int r8a7779_get_core_count(void);
-extern int r8a7779_platform_cpu_kill(unsigned int cpu);
-extern void r8a7779_secondary_init(unsigned int cpu);
-extern int r8a7779_boot_secondary(unsigned int cpu);
-extern void r8a7779_smp_prepare_cpus(void);
 extern void r8a7779_register_twd(void);
 
-extern void shmobile_init_late(void);
-
 #ifdef CONFIG_SUSPEND
 int shmobile_suspend_init(void);
 #else
@@ -100,4 +89,21 @@ int shmobile_cpuidle_init(void);
 static inline int shmobile_cpuidle_init(void) { return 0; }
 #endif
 
+extern void shmobile_cpu_die(unsigned int cpu);
+extern int shmobile_cpu_disable(unsigned int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int shmobile_cpu_is_dead(unsigned int cpu);
+#else
+static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
+#endif
+
+extern void shmobile_smp_init_cpus(unsigned int ncores);
+
+static inline void shmobile_init_late(void)
+{
+	shmobile_suspend_init();
+	shmobile_cpuidle_init();
+}
+
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index e6b0c1bf4b7e..ac3751705cab 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -7,13 +7,10 @@ extern void emev2_add_early_devices(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
 extern void emev2_set_boot_vector(unsigned long value);
-extern unsigned int emev2_get_core_count(void);
-extern int emev2_platform_cpu_kill(unsigned int cpu);
-extern void emev2_secondary_init(unsigned int cpu);
-extern int emev2_boot_secondary(unsigned int cpu);
-extern void emev2_smp_prepare_cpus(void);
 
 #define EMEV2_GPIO_BASE 200
 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
 
+extern struct smp_operations emev2_smp_ops;
+
 #endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
index 5a402840fe28..690553a06887 100644
--- a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
@@ -12,6 +12,8 @@
 
 #include <linux/pm_domain.h>
 
+#define DEFAULT_DEV_LATENCY_NS	250000
+
 struct platform_device;
 
 struct rmobile_pm_domain {
@@ -29,16 +31,33 @@ struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
 	return container_of(d, struct rmobile_pm_domain, genpd);
 }
 
+struct pm_domain_device {
+	const char *domain_name;
+	struct platform_device *pdev;
+};
+
 #ifdef CONFIG_PM
-extern void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd);
-extern void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd,
-					struct platform_device *pdev);
-extern void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd,
-				    struct rmobile_pm_domain *rmobile_sd);
+extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num);
+extern void rmobile_add_device_to_domain_td(const char *domain_name,
+					    struct platform_device *pdev,
+					    struct gpd_timing_data *td);
+
+static inline void rmobile_add_device_to_domain(const char *domain_name,
+						struct platform_device *pdev)
+{
+	rmobile_add_device_to_domain_td(domain_name, pdev, NULL);
+}
+
+extern void rmobile_add_devices_to_domains(struct pm_domain_device data[],
+					   int size);
 #else
-#define rmobile_init_pm_domain(pd) do { } while (0)
-#define rmobile_add_device_to_domain(pd, pdev) do { } while (0)
-#define rmobile_pm_add_subdomain(pd, sd) do { } while (0)
+
+#define rmobile_init_domains(domains, num) do { } while (0)
+#define rmobile_add_device_to_domain_td(name, pdev, td) do { } while (0)
+#define rmobile_add_device_to_domain(name, pdev) do { } while (0)
+
+static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[],
+						  int size) {}
 #endif /* CONFIG_PM */
 
 #endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index 7143147780df..59d252f4cf97 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -607,9 +607,9 @@ enum {
 };
 
 #ifdef CONFIG_PM
-extern struct rmobile_pm_domain r8a7740_pd_a4s;
-extern struct rmobile_pm_domain r8a7740_pd_a3sp;
-extern struct rmobile_pm_domain r8a7740_pd_a4lc;
+extern void __init r8a7740_init_pm_domains(void);
+#else
+static inline void r8a7740_init_pm_domains(void) {}
 #endif /* CONFIG_PM */
 
 #endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index b07ad318eb2e..499f52d2a4a1 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -347,17 +347,11 @@ extern int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch);
 extern int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch);
 
 #ifdef CONFIG_PM
-extern struct r8a7779_pm_domain r8a7779_sh4a;
-extern struct r8a7779_pm_domain r8a7779_sgx;
-extern struct r8a7779_pm_domain r8a7779_vdp1;
-extern struct r8a7779_pm_domain r8a7779_impx3;
-
-extern void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd);
-extern void r8a7779_add_device_to_domain(struct r8a7779_pm_domain *r8a7779_pd,
-					struct platform_device *pdev);
+extern void __init r8a7779_init_pm_domains(void);
 #else
-#define r8a7779_init_pm_domain(pd) do { } while (0)
-#define r8a7779_add_device_to_domain(pd, pdev) do { } while (0)
+static inline void r8a7779_init_pm_domains(void) {}
 #endif /* CONFIG_PM */
 
+extern struct smp_operations r8a7779_smp_ops;
+
 #endif /* __ASM_R8A7779_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index b59048e6d8fd..eb98b45c5089 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -478,21 +478,17 @@ extern struct clk sh7372_fsibck_clk;
 extern struct clk sh7372_fsidiva_clk;
 extern struct clk sh7372_fsidivb_clk;
 
-#ifdef CONFIG_PM
-extern struct rmobile_pm_domain sh7372_pd_a4lc;
-extern struct rmobile_pm_domain sh7372_pd_a4mp;
-extern struct rmobile_pm_domain sh7372_pd_d4;
-extern struct rmobile_pm_domain sh7372_pd_a4r;
-extern struct rmobile_pm_domain sh7372_pd_a3rv;
-extern struct rmobile_pm_domain sh7372_pd_a3ri;
-extern struct rmobile_pm_domain sh7372_pd_a4s;
-extern struct rmobile_pm_domain sh7372_pd_a3sp;
-extern struct rmobile_pm_domain sh7372_pd_a3sg;
-#endif /* CONFIG_PM */
-
 extern void sh7372_intcs_suspend(void);
 extern void sh7372_intcs_resume(void);
 extern void sh7372_intca_suspend(void);
 extern void sh7372_intca_resume(void);
 
+#ifdef CONFIG_PM
+extern void __init sh7372_init_pm_domains(void);
+#else
+static inline void sh7372_init_pm_domains(void) {}
+#endif
+
+extern void __init sh7372_pm_init_late(void);
+
 #endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index fe950f25d793..606d31d02a4e 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -557,4 +557,6 @@ enum {
 #define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
 #define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
 
+extern struct smp_operations sh73a0_smp_ops;
+
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index f04fad4ec4fb..ef66f1a8aa2e 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -29,14 +29,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#define INT2SMSKCR0 0xfe7822a0
-#define INT2SMSKCR1 0xfe7822a4
-#define INT2SMSKCR2 0xfe7822a8
-#define INT2SMSKCR3 0xfe7822ac
-#define INT2SMSKCR4 0xfe7822b0
+#define INT2SMSKCR0 IOMEM(0xfe7822a0)
+#define INT2SMSKCR1 IOMEM(0xfe7822a4)
+#define INT2SMSKCR2 IOMEM(0xfe7822a8)
+#define INT2SMSKCR3 IOMEM(0xfe7822ac)
+#define INT2SMSKCR4 IOMEM(0xfe7822b0)
 
-#define INT2NTSR0 0xfe700060
-#define INT2NTSR1 0xfe700064
+#define INT2NTSR0 IOMEM(0xfe700060)
+#define INT2NTSR1 IOMEM(0xfe700064)
 
 static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
 {
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 2587a22842f2..a91caad7db7c 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -624,6 +624,9 @@ void sh7372_intcs_resume(void)
 		__raw_writeb(ffd5[k], intcs_ffd5 + k);
 }
 
+#define E694_BASE IOMEM(0xe6940000)
+#define E695_BASE IOMEM(0xe6950000)
+
 static unsigned short e694[0x200];
 static unsigned short e695[0x200];
 
@@ -632,22 +635,22 @@ void sh7372_intca_suspend(void)
 	int k;
 
 	for (k = 0x00; k <= 0x38; k += 4)
-		e694[k] = __raw_readw(0xe6940000 + k);
+		e694[k] = __raw_readw(E694_BASE + k);
 
 	for (k = 0x80; k <= 0xb4; k += 4)
-		e694[k] = __raw_readb(0xe6940000 + k);
+		e694[k] = __raw_readb(E694_BASE + k);
 
 	for (k = 0x180; k <= 0x1b4; k += 4)
-		e694[k] = __raw_readb(0xe6940000 + k);
+		e694[k] = __raw_readb(E694_BASE + k);
 
 	for (k = 0x00; k <= 0x50; k += 4)
-		e695[k] = __raw_readw(0xe6950000 + k);
+		e695[k] = __raw_readw(E695_BASE + k);
 
 	for (k = 0x80; k <= 0xa8; k += 4)
-		e695[k] = __raw_readb(0xe6950000 + k);
+		e695[k] = __raw_readb(E695_BASE + k);
 
 	for (k = 0x180; k <= 0x1a8; k += 4)
-		e695[k] = __raw_readb(0xe6950000 + k);
+		e695[k] = __raw_readb(E695_BASE + k);
 }
 
 void sh7372_intca_resume(void)
@@ -655,20 +658,20 @@ void sh7372_intca_resume(void)
 	int k;
 
 	for (k = 0x00; k <= 0x38; k += 4)
-		__raw_writew(e694[k], 0xe6940000 + k);
+		__raw_writew(e694[k], E694_BASE + k);
 
 	for (k = 0x80; k <= 0xb4; k += 4)
-		__raw_writeb(e694[k], 0xe6940000 + k);
+		__raw_writeb(e694[k], E694_BASE + k);
 
 	for (k = 0x180; k <= 0x1b4; k += 4)
-		__raw_writeb(e694[k], 0xe6940000 + k);
+		__raw_writeb(e694[k], E694_BASE + k);
 
 	for (k = 0x00; k <= 0x50; k += 4)
-		__raw_writew(e695[k], 0xe6950000 + k);
+		__raw_writew(e695[k], E695_BASE + k);
 
 	for (k = 0x80; k <= 0xa8; k += 4)
-		__raw_writeb(e695[k], 0xe6950000 + k);
+		__raw_writeb(e695[k], E695_BASE + k);
 
 	for (k = 0x180; k <= 0x1a8; k += 4)
-		__raw_writeb(e695[k], 0xe6950000 + k);
+		__raw_writeb(e695[k], E695_BASE + k);
 }
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index ee447404c857..f0c5e5190601 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
 	return 0; /* always allow wakeup */
 }
 
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
 
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
 #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
 
 INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
@@ -366,10 +366,12 @@ static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
 
 static struct irqaction sh73a0_irq_pin_cascade[32];
 
-#define PINTER0 0xe69000a0
-#define PINTER1 0xe69000a4
-#define PINTRR0 0xe69000d0
-#define PINTRR1 0xe69000d4
+#define PINTER0_PHYS 0xe69000a0
+#define PINTER1_PHYS 0xe69000a4
+#define PINTER0_VIRT IOMEM(0xe69000a0)
+#define PINTER1_VIRT IOMEM(0xe69000a4)
+#define PINTRR0 IOMEM(0xe69000d0)
+#define PINTRR1 IOMEM(0xe69000d4)
 
 #define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
 #define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
@@ -377,14 +379,14 @@ static struct irqaction sh73a0_irq_pin_cascade[32];
 #define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
 #define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
 
-INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0",		\
+INTC_PINT(intc_pint0, PINTER0_PHYS, 0xe69000b0, "sh73a0-pint0",		\
   INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
   INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
   INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
   INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
   INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
 
-INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1",		\
+INTC_PINT(intc_pint1, PINTER1_PHYS, 0xe69000c0, "sh73a0-pint1",		\
   INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
   INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
   INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
@@ -394,7 +396,7 @@ INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1",		\
 static struct irqaction sh73a0_pint0_cascade;
 static struct irqaction sh73a0_pint1_cascade;
 
-static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
+static void pint_demux(void __iomem *rr, void __iomem *er, int base_irq)
 {
 	unsigned long value =  ioread32(rr) & ioread32(er);
 	int k;
@@ -409,13 +411,13 @@ static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
 
 static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
 {
-	pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0));
+	pint_demux(PINTRR0, PINTER0_VIRT, SH73A0_PINT0_IRQ(0));
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
 {
-	pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0));
+	pint_demux(PINTRR1, PINTER1_VIRT, SH73A0_PINT1_IRQ(0));
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c
index ce9e7fa5cc8a..134d1b9a8821 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7740.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7740.c
@@ -20,7 +20,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/r8a7740.h>
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index d14c9b048077..cbc26ba2a0a2 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -19,7 +19,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <linux/ioport.h>
 #include <mach/r8a7779.h>
 
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index e6e524654e67..c0c137f39052 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -18,7 +18,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/sh7367.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)				\
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 336093f9210a..7a1525fd6ada 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -22,7 +22,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/irqs.h>
 #include <mach/sh7372.h>
 
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index 2f10511946ad..f3117f67fa25 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -19,7 +19,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/sh7377.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)				\
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 4a547b803268..b442f9d8c716 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -20,7 +20,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
 #include <mach/sh73a0.h>
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index fde0d23121dc..ed8d2351915e 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -11,100 +11,11 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/of.h>
 #include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
 
-#ifdef CONFIG_ARCH_SH73A0
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
-			of_machine_is_compatible("renesas,sh73a0"))
-#else
-#define is_sh73a0() (0)
-#endif
-
-#define is_r8a7779() machine_is_marzen()
-
-#ifdef CONFIG_ARCH_EMEV2
-#define is_emev2() of_machine_is_compatible("renesas,emev2")
-#else
-#define is_emev2() (0)
-#endif
-
-static unsigned int __init shmobile_smp_get_core_count(void)
-{
-	if (is_sh73a0())
-		return sh73a0_get_core_count();
-
-	if (is_r8a7779())
-		return r8a7779_get_core_count();
-
-	if (is_emev2())
-		return emev2_get_core_count();
-
-	return 1;
-}
-
-static void __init shmobile_smp_prepare_cpus(void)
-{
-	if (is_sh73a0())
-		sh73a0_smp_prepare_cpus();
-
-	if (is_r8a7779())
-		r8a7779_smp_prepare_cpus();
-
-	if (is_emev2())
-		emev2_smp_prepare_cpus();
-}
-
-int shmobile_platform_cpu_kill(unsigned int cpu)
-{
-	if (is_r8a7779())
-		return r8a7779_platform_cpu_kill(cpu);
-
-	if (is_emev2())
-		return emev2_platform_cpu_kill(cpu);
-
-	return 1;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __init shmobile_smp_init_cpus(unsigned int ncores)
 {
-	trace_hardirqs_off();
-
-	if (is_sh73a0())
-		sh73a0_secondary_init(cpu);
-
-	if (is_r8a7779())
-		r8a7779_secondary_init(cpu);
-
-	if (is_emev2())
-		emev2_secondary_init(cpu);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	if (is_sh73a0())
-		return sh73a0_boot_secondary(cpu);
-
-	if (is_r8a7779())
-		return r8a7779_boot_secondary(cpu);
-
-	if (is_emev2())
-		return emev2_boot_secondary(cpu);
-
-	return -ENOSYS;
-}
-
-void __init smp_init_cpus(void)
-{
-	unsigned int ncores = shmobile_smp_get_core_count();
 	unsigned int i;
 
 	if (ncores > nr_cpu_ids) {
@@ -118,8 +29,3 @@ void __init smp_init_cpus(void)
 
 	set_smp_cross_call(gic_raise_softirq);
 }
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	shmobile_smp_prepare_cpus();
-}
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index 893504d012a6..21e5316d2d88 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -21,14 +21,6 @@ static int r8a7740_pd_a4s_suspend(void)
 	return -EBUSY;
 }
 
-struct rmobile_pm_domain r8a7740_pd_a4s = {
-	.genpd.name	= "A4S",
-	.bit_shift	= 10,
-	.gov		= &pm_domain_always_on_gov,
-	.no_debug	= true,
-	.suspend	= r8a7740_pd_a4s_suspend,
-};
-
 static int r8a7740_pd_a3sp_suspend(void)
 {
 	/*
@@ -38,17 +30,31 @@ static int r8a7740_pd_a3sp_suspend(void)
 	return console_suspend_enabled ? 0 : -EBUSY;
 }
 
-struct rmobile_pm_domain r8a7740_pd_a3sp = {
-	.genpd.name	= "A3SP",
-	.bit_shift	= 11,
-	.gov		= &pm_domain_always_on_gov,
-	.no_debug	= true,
-	.suspend	= r8a7740_pd_a3sp_suspend,
+static struct rmobile_pm_domain r8a7740_pm_domains[] = {
+	{
+		.genpd.name	= "A4S",
+		.bit_shift	= 10,
+		.gov		= &pm_domain_always_on_gov,
+		.no_debug	= true,
+		.suspend	= r8a7740_pd_a4s_suspend,
+	},
+	{
+		.genpd.name	= "A3SP",
+		.bit_shift	= 11,
+		.gov		= &pm_domain_always_on_gov,
+		.no_debug	= true,
+		.suspend	= r8a7740_pd_a3sp_suspend,
+	},
+	{
+		.genpd.name	= "A4LC",
+		.bit_shift	= 1,
+	},
 };
 
-struct rmobile_pm_domain r8a7740_pd_a4lc = {
-	.genpd.name	= "A4LC",
-	.bit_shift	= 1,
-};
+void __init r8a7740_init_pm_domains(void)
+{
+	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
+	pm_genpd_add_subdomain_names("A4S", "A3SP");
+}
 
 #endif /* CONFIG_PM */
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index a18a4ae16d2b..d50a8e9b94a4 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -183,7 +183,7 @@ static bool pd_active_wakeup(struct device *dev)
 	return true;
 }
 
-void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
+static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
 {
 	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
 
@@ -199,43 +199,44 @@ void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
 		pd_power_up(&r8a7779_pd->genpd);
 }
 
-void r8a7779_add_device_to_domain(struct r8a7779_pm_domain *r8a7779_pd,
-				 struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-
-	pm_genpd_add_device(&r8a7779_pd->genpd, dev);
-	if (pm_clk_no_clocks(dev))
-		pm_clk_add(dev, NULL);
-}
-
-struct r8a7779_pm_domain r8a7779_sh4a = {
-	.ch = {
-		.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
-		.isr_bit = 16, /* SH4A */
-	}
-};
-
-struct r8a7779_pm_domain r8a7779_sgx = {
-	.ch = {
-		.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
-		.isr_bit = 20, /* SGX */
-	}
+static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
+	{
+		.genpd.name = "SH4A",
+		.ch = {
+			.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
+			.isr_bit = 16, /* SH4A */
+		},
+	},
+	{
+		.genpd.name = "SGX",
+		.ch = {
+			.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
+			.isr_bit = 20, /* SGX */
+		},
+	},
+	{
+		.genpd.name = "VDP1",
+		.ch = {
+			.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
+			.isr_bit = 21, /* VDP */
+		},
+	},
+	{
+		.genpd.name = "IMPX3",
+		.ch = {
+			.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
+			.isr_bit = 24, /* IMP */
+		},
+	},
 };
 
-struct r8a7779_pm_domain r8a7779_vdp1 = {
-	.ch = {
-		.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
-		.isr_bit = 21, /* VDP */
-	}
-};
+void __init r8a7779_init_pm_domains(void)
+{
+	int j;
 
-struct r8a7779_pm_domain r8a7779_impx3 = {
-	.ch = {
-		.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
-		.isr_bit = 24, /* IMP */
-	}
-};
+	for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
+		r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
+}
 
 #endif /* CONFIG_PM */
 
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index a8562540f1d6..1fc05d9453d0 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -20,9 +20,9 @@
 #include <mach/pm-rmobile.h>
 
 /* SYSC */
-#define SPDCR		0xe6180008
-#define SWUCR		0xe6180014
-#define PSTR		0xe6180080
+#define SPDCR		IOMEM(0xe6180008)
+#define SWUCR		IOMEM(0xe6180014)
+#define PSTR		IOMEM(0xe6180080)
 
 #define PSTR_RETRIES	100
 #define PSTR_DELAY_US	10
@@ -134,7 +134,7 @@ static int rmobile_pd_start_dev(struct device *dev)
 	return ret;
 }
 
-void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
+static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 {
 	struct generic_pm_domain *genpd = &rmobile_pd->genpd;
 	struct dev_power_governor *gov = rmobile_pd->gov;
@@ -149,19 +149,38 @@ void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	__rmobile_pd_power_up(rmobile_pd, false);
 }
 
-void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd,
-				 struct platform_device *pdev)
+void rmobile_init_domains(struct rmobile_pm_domain domains[], int num)
+{
+	int j;
+
+	for (j = 0; j < num; j++)
+		rmobile_init_pm_domain(&domains[j]);
+}
+
+void rmobile_add_device_to_domain_td(const char *domain_name,
+				     struct platform_device *pdev,
+				     struct gpd_timing_data *td)
 {
 	struct device *dev = &pdev->dev;
 
-	pm_genpd_add_device(&rmobile_pd->genpd, dev);
+	__pm_genpd_name_add_device(domain_name, dev, td);
 	if (pm_clk_no_clocks(dev))
 		pm_clk_add(dev, NULL);
 }
 
-void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd,
-			     struct rmobile_pm_domain *rmobile_sd)
+void rmobile_add_devices_to_domains(struct pm_domain_device data[],
+				    int size)
 {
-	pm_genpd_add_subdomain(&rmobile_pd->genpd, &rmobile_sd->genpd);
+	struct gpd_timing_data latencies = {
+		.stop_latency_ns = DEFAULT_DEV_LATENCY_NS,
+		.start_latency_ns = DEFAULT_DEV_LATENCY_NS,
+		.save_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
+		.restore_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
+	};
+	int j;
+
+	for (j = 0; j < size; j++)
+		rmobile_add_device_to_domain_td(data[j].domain_name,
+						data[j].pdev, &latencies);
 }
 #endif /* CONFIG_PM */
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 792037069226..a0826a48dd08 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -21,6 +21,7 @@
 #include <linux/irq.h>
 #include <linux/bitrev.h>
 #include <linux/console.h>
+#include <asm/cpuidle.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 #include <asm/suspend.h>
@@ -29,62 +30,50 @@
 #include <mach/pm-rmobile.h>
 
 /* DBG */
-#define DBGREG1 0xe6100020
-#define DBGREG9 0xe6100040
+#define DBGREG1 IOMEM(0xe6100020)
+#define DBGREG9 IOMEM(0xe6100040)
 
 /* CPGA */
-#define SYSTBCR 0xe6150024
-#define MSTPSR0 0xe6150030
-#define MSTPSR1 0xe6150038
-#define MSTPSR2 0xe6150040
-#define MSTPSR3 0xe6150048
-#define MSTPSR4 0xe615004c
-#define PLLC01STPCR 0xe61500c8
+#define SYSTBCR IOMEM(0xe6150024)
+#define MSTPSR0 IOMEM(0xe6150030)
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR4 IOMEM(0xe615004c)
+#define PLLC01STPCR IOMEM(0xe61500c8)
 
 /* SYSC */
-#define SBAR 0xe6180020
-#define WUPRMSK 0xe6180028
-#define WUPSMSK 0xe618002c
-#define WUPSMSK2 0xe6180048
-#define WUPSFAC 0xe6180098
-#define IRQCR 0xe618022c
-#define IRQCR2 0xe6180238
-#define IRQCR3 0xe6180244
-#define IRQCR4 0xe6180248
-#define PDNSEL 0xe6180254
+#define SBAR IOMEM(0xe6180020)
+#define WUPRMSK IOMEM(0xe6180028)
+#define WUPSMSK IOMEM(0xe618002c)
+#define WUPSMSK2 IOMEM(0xe6180048)
+#define WUPSFAC IOMEM(0xe6180098)
+#define IRQCR IOMEM(0xe618022c)
+#define IRQCR2 IOMEM(0xe6180238)
+#define IRQCR3 IOMEM(0xe6180244)
+#define IRQCR4 IOMEM(0xe6180248)
+#define PDNSEL IOMEM(0xe6180254)
 
 /* INTC */
-#define ICR1A 0xe6900000
-#define ICR2A 0xe6900004
-#define ICR3A 0xe6900008
-#define ICR4A 0xe690000c
-#define INTMSK00A 0xe6900040
-#define INTMSK10A 0xe6900044
-#define INTMSK20A 0xe6900048
-#define INTMSK30A 0xe690004c
+#define ICR1A IOMEM(0xe6900000)
+#define ICR2A IOMEM(0xe6900004)
+#define ICR3A IOMEM(0xe6900008)
+#define ICR4A IOMEM(0xe690000c)
+#define INTMSK00A IOMEM(0xe6900040)
+#define INTMSK10A IOMEM(0xe6900044)
+#define INTMSK20A IOMEM(0xe6900048)
+#define INTMSK30A IOMEM(0xe690004c)
 
 /* MFIS */
+/* FIXME: pointing where? */
 #define SMFRAM 0xe6a70000
 
 /* AP-System Core */
-#define APARMBAREA 0xe6f10020
+#define APARMBAREA IOMEM(0xe6f10020)
 
 #ifdef CONFIG_PM
 
-struct rmobile_pm_domain sh7372_pd_a4lc = {
-	.genpd.name = "A4LC",
-	.bit_shift = 1,
-};
-
-struct rmobile_pm_domain sh7372_pd_a4mp = {
-	.genpd.name = "A4MP",
-	.bit_shift = 2,
-};
-
-struct rmobile_pm_domain sh7372_pd_d4 = {
-	.genpd.name = "D4",
-	.bit_shift = 3,
-};
+#define PM_DOMAIN_ON_OFF_LATENCY_NS	250000
 
 static int sh7372_a4r_pd_suspend(void)
 {
@@ -93,39 +82,25 @@ static int sh7372_a4r_pd_suspend(void)
 	return 0;
 }
 
-struct rmobile_pm_domain sh7372_pd_a4r = {
-	.genpd.name = "A4R",
-	.bit_shift = 5,
-	.suspend = sh7372_a4r_pd_suspend,
-	.resume = sh7372_intcs_resume,
-};
+static bool a4s_suspend_ready;
 
-struct rmobile_pm_domain sh7372_pd_a3rv = {
-	.genpd.name = "A3RV",
-	.bit_shift = 6,
-};
-
-struct rmobile_pm_domain sh7372_pd_a3ri = {
-	.genpd.name = "A3RI",
-	.bit_shift = 8,
-};
-
-static int sh7372_pd_a4s_suspend(void)
+static int sh7372_a4s_pd_suspend(void)
 {
 	/*
 	 * The A4S domain contains the CPU core and therefore it should
-	 * only be turned off if the CPU is in use.
+	 * only be turned off if the CPU is not in use.  This may happen
+	 * during system suspend, when SYSC is going to be used for generating
+	 * resume signals and a4s_suspend_ready is set to let
+	 * sh7372_enter_suspend() know that it can turn A4S off.
 	 */
+	a4s_suspend_ready = true;
 	return -EBUSY;
 }
 
-struct rmobile_pm_domain sh7372_pd_a4s = {
-	.genpd.name = "A4S",
-	.bit_shift = 10,
-	.gov = &pm_domain_always_on_gov,
-	.no_debug = true,
-	.suspend = sh7372_pd_a4s_suspend,
-};
+static void sh7372_a4s_pd_resume(void)
+{
+	a4s_suspend_ready = false;
+}
 
 static int sh7372_a3sp_pd_suspend(void)
 {
@@ -136,18 +111,80 @@ static int sh7372_a3sp_pd_suspend(void)
 	return console_suspend_enabled ? 0 : -EBUSY;
 }
 
-struct rmobile_pm_domain sh7372_pd_a3sp = {
-	.genpd.name = "A3SP",
-	.bit_shift = 11,
-	.gov = &pm_domain_always_on_gov,
-	.no_debug = true,
-	.suspend = sh7372_a3sp_pd_suspend,
+static struct rmobile_pm_domain sh7372_pm_domains[] = {
+	{
+		.genpd.name = "A4LC",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 1,
+	},
+	{
+		.genpd.name = "A4MP",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 2,
+	},
+	{
+		.genpd.name = "D4",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 3,
+	},
+	{
+		.genpd.name = "A4R",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 5,
+		.suspend = sh7372_a4r_pd_suspend,
+		.resume = sh7372_intcs_resume,
+	},
+	{
+		.genpd.name = "A3RV",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 6,
+	},
+	{
+		.genpd.name = "A3RI",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 8,
+	},
+	{
+		.genpd.name = "A4S",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 10,
+		.gov = &pm_domain_always_on_gov,
+		.no_debug = true,
+		.suspend = sh7372_a4s_pd_suspend,
+		.resume = sh7372_a4s_pd_resume,
+	},
+	{
+		.genpd.name = "A3SP",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 11,
+		.gov = &pm_domain_always_on_gov,
+		.no_debug = true,
+		.suspend = sh7372_a3sp_pd_suspend,
+	},
+	{
+		.genpd.name = "A3SG",
+		.genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS,
+		.bit_shift = 13,
+	},
 };
 
-struct rmobile_pm_domain sh7372_pd_a3sg = {
-	.genpd.name = "A3SG",
-	.bit_shift = 13,
-};
+void __init sh7372_init_pm_domains(void)
+{
+	rmobile_init_domains(sh7372_pm_domains, ARRAY_SIZE(sh7372_pm_domains));
+	pm_genpd_add_subdomain_names("A4LC", "A3RV");
+	pm_genpd_add_subdomain_names("A4R", "A4LC");
+	pm_genpd_add_subdomain_names("A4S", "A3SG");
+	pm_genpd_add_subdomain_names("A4S", "A3SP");
+}
 
 #endif /* CONFIG_PM */
 
@@ -303,6 +340,21 @@ static void sh7372_enter_a3sm_common(int pllc0_on)
 	sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
 	sh7372_enter_sysc(pllc0_on, 1 << 12);
 }
+
+static void sh7372_enter_a4s_common(int pllc0_on)
+{
+	sh7372_intca_suspend();
+	sh7372_set_reset_vector(SMFRAM);
+	sh7372_enter_sysc(pllc0_on, 1 << 10);
+	sh7372_intca_resume();
+}
+
+static void sh7372_pm_setup_smfram(void)
+{
+	memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
+}
+#else
+static inline void sh7372_pm_setup_smfram(void) {}
 #endif /* CONFIG_SUSPEND || CONFIG_CPU_IDLE */
 
 #ifdef CONFIG_CPU_IDLE
@@ -312,7 +364,8 @@ static int sh7372_do_idle_core_standby(unsigned long unused)
 	return 0;
 }
 
-static void sh7372_enter_core_standby(void)
+static int sh7372_enter_core_standby(struct cpuidle_device *dev,
+				     struct cpuidle_driver *drv, int index)
 {
 	sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
 
@@ -323,83 +376,102 @@ static void sh7372_enter_core_standby(void)
 
 	 /* disable reset vector translation */
 	__raw_writel(0, SBAR);
+
+	return 1;
 }
 
-static void sh7372_enter_a3sm_pll_on(void)
+static int sh7372_enter_a3sm_pll_on(struct cpuidle_device *dev,
+				    struct cpuidle_driver *drv, int index)
 {
 	sh7372_enter_a3sm_common(1);
+	return 2;
 }
 
-static void sh7372_enter_a3sm_pll_off(void)
+static int sh7372_enter_a3sm_pll_off(struct cpuidle_device *dev,
+				     struct cpuidle_driver *drv, int index)
 {
 	sh7372_enter_a3sm_common(0);
+	return 3;
 }
 
-static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
+static int sh7372_enter_a4s(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
 {
-	struct cpuidle_state *state = &drv->states[drv->state_count];
-
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
-	strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
-	state->exit_latency = 10;
-	state->target_residency = 20 + 10;
-	state->flags = CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
-	drv->state_count++;
-
-	state = &drv->states[drv->state_count];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
-	strncpy(state->desc, "A3SM PLL ON", CPUIDLE_DESC_LEN);
-	state->exit_latency = 20;
-	state->target_residency = 30 + 20;
-	state->flags = CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_on;
-	drv->state_count++;
-
-	state = &drv->states[drv->state_count];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C4");
-	strncpy(state->desc, "A3SM PLL OFF", CPUIDLE_DESC_LEN);
-	state->exit_latency = 120;
-	state->target_residency = 30 + 120;
-	state->flags = CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_off;
-	drv->state_count++;
+	unsigned long msk, msk2;
+
+	if (!sh7372_sysc_valid(&msk, &msk2))
+		return sh7372_enter_a3sm_pll_off(dev, drv, index);
+
+	sh7372_setup_sysc(msk, msk2);
+	sh7372_enter_a4s_common(0);
+	return 4;
 }
 
+static struct cpuidle_driver sh7372_cpuidle_driver = {
+	.name			= "sh7372_cpuidle",
+	.owner			= THIS_MODULE,
+	.en_core_tk_irqen	= 1,
+	.state_count		= 5,
+	.safe_state_index	= 0, /* C1 */
+	.states[0] = ARM_CPUIDLE_WFI_STATE,
+	.states[0].enter = shmobile_enter_wfi,
+	.states[1] = {
+		.name = "C2",
+		.desc = "Core Standby Mode",
+		.exit_latency = 10,
+		.target_residency = 20 + 10,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.enter = sh7372_enter_core_standby,
+	},
+	.states[2] = {
+		.name = "C3",
+		.desc = "A3SM PLL ON",
+		.exit_latency = 20,
+		.target_residency = 30 + 20,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.enter = sh7372_enter_a3sm_pll_on,
+	},
+	.states[3] = {
+		.name = "C4",
+		.desc = "A3SM PLL OFF",
+		.exit_latency = 120,
+		.target_residency = 30 + 120,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.enter = sh7372_enter_a3sm_pll_off,
+	},
+	.states[4] = {
+		.name = "C5",
+		.desc = "A4S PLL OFF",
+		.exit_latency = 240,
+		.target_residency = 30 + 240,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.enter = sh7372_enter_a4s,
+		.disabled = true,
+	},
+};
+
 static void sh7372_cpuidle_init(void)
 {
-	shmobile_cpuidle_setup = sh7372_cpuidle_setup;
+	shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver);
 }
 #else
 static void sh7372_cpuidle_init(void) {}
 #endif
 
 #ifdef CONFIG_SUSPEND
-static void sh7372_enter_a4s_common(int pllc0_on)
-{
-	sh7372_intca_suspend();
-	memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
-	sh7372_set_reset_vector(SMFRAM);
-	sh7372_enter_sysc(pllc0_on, 1 << 10);
-	sh7372_intca_resume();
-}
-
 static int sh7372_enter_suspend(suspend_state_t suspend_state)
 {
 	unsigned long msk, msk2;
 
 	/* check active clocks to determine potential wakeup sources */
-	if (sh7372_sysc_valid(&msk, &msk2)) {
-		if (!console_suspend_enabled &&
-		    sh7372_pd_a4s.genpd.status == GPD_STATE_POWER_OFF) {
-			/* convert INTC mask/sense to SYSC mask/sense */
-			sh7372_setup_sysc(msk, msk2);
-
-			/* enter A4S sleep with PLLC0 off */
-			pr_debug("entering A4S\n");
-			sh7372_enter_a4s_common(0);
-			return 0;
-		}
+	if (sh7372_sysc_valid(&msk, &msk2) && a4s_suspend_ready) {
+		/* convert INTC mask/sense to SYSC mask/sense */
+		sh7372_setup_sysc(msk, msk2);
+
+		/* enter A4S sleep with PLLC0 off */
+		pr_debug("entering A4S\n");
+		sh7372_enter_a4s_common(0);
+		return 0;
 	}
 
 	/* default to enter A3SM sleep with PLLC0 off */
@@ -425,7 +497,7 @@ static int sh7372_pm_notifier_fn(struct notifier_block *notifier,
 		 * executed during system suspend and resume, respectively, so
 		 * that those functions don't crash while accessing the INTCS.
 		 */
-		pm_genpd_poweron(&sh7372_pd_a4r.genpd);
+		pm_genpd_name_poweron("A4R");
 		break;
 	case PM_POST_SUSPEND:
 		pm_genpd_poweroff_unused();
@@ -454,6 +526,14 @@ void __init sh7372_pm_init(void)
 	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
 	__raw_writel(0, PDNSEL);
 
+	sh7372_pm_setup_smfram();
+
 	sh7372_suspend_init();
 	sh7372_cpuidle_init();
 }
+
+void __init sh7372_pm_init_late(void)
+{
+	shmobile_init_late();
+	pm_genpd_name_attach_cpuidle("A4S", 4);
+}
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index dae9aa68bb09..a47beeb18283 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -356,6 +356,26 @@ static struct platform_device gio4_device = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start	= 152,
+		.end	= 152,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start	= 153,
+		.end	= 153,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pmu_resources),
+	.resource	= pmu_resources,
+};
+
 static struct platform_device *emev2_early_devices[] __initdata = {
 	&uart0_device,
 	&uart1_device,
@@ -370,6 +390,7 @@ static struct platform_device *emev2_late_devices[] __initdata = {
 	&gio2_device,
 	&gio3_device,
 	&gio4_device,
+	&pmu_device,
 };
 
 void __init emev2_add_standard_devices(void)
@@ -440,6 +461,7 @@ void __init emev2_init_irq_dt(void)
 }
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
+	.smp		= smp_ops(emev2_smp_ops),
 	.init_early	= emev2_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= emev2_init_irq_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 78948a9dba0e..11bb1d984197 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -673,12 +673,7 @@ void __init r8a7740_add_standard_devices(void)
 	r8a7740_i2c_workaround(&i2c0_device);
 	r8a7740_i2c_workaround(&i2c1_device);
 
-	/* PM domain */
-	rmobile_init_pm_domain(&r8a7740_pd_a4s);
-	rmobile_init_pm_domain(&r8a7740_pd_a3sp);
-	rmobile_init_pm_domain(&r8a7740_pd_a4lc);
-
-	rmobile_pm_add_subdomain(&r8a7740_pd_a4s, &r8a7740_pd_a3sp);
+	r8a7740_init_pm_domains();
 
 	/* add devices */
 	platform_add_devices(r8a7740_early_devices,
@@ -688,16 +683,16 @@ void __init r8a7740_add_standard_devices(void)
 
 	/* add devices to PM domain  */
 
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif0_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif1_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif2_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif3_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif4_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif5_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif6_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scif7_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&scifb_device);
-	rmobile_add_device_to_domain(&r8a7740_pd_a3sp,	&i2c1_device);
+	rmobile_add_device_to_domain("A3SP",	&scif0_device);
+	rmobile_add_device_to_domain("A3SP",	&scif1_device);
+	rmobile_add_device_to_domain("A3SP",	&scif2_device);
+	rmobile_add_device_to_domain("A3SP",	&scif3_device);
+	rmobile_add_device_to_domain("A3SP",	&scif4_device);
+	rmobile_add_device_to_domain("A3SP",	&scif5_device);
+	rmobile_add_device_to_domain("A3SP",	&scif6_device);
+	rmobile_add_device_to_domain("A3SP",	&scif7_device);
+	rmobile_add_device_to_domain("A3SP",	&scifb_device);
+	rmobile_add_device_to_domain("A3SP",	&i2c1_device);
 }
 
 static void __init r8a7740_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index e98e46f6cf55..2917668f0091 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -251,10 +251,7 @@ void __init r8a7779_add_standard_devices(void)
 #endif
 	r8a7779_pm_init();
 
-	r8a7779_init_pm_domain(&r8a7779_sh4a);
-	r8a7779_init_pm_domain(&r8a7779_sgx);
-	r8a7779_init_pm_domain(&r8a7779_vdp1);
-	r8a7779_init_pm_domain(&r8a7779_impx3);
+	r8a7779_init_pm_domains();
 
 	platform_add_devices(r8a7779_early_devices,
 			    ARRAY_SIZE(r8a7779_early_devices));
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index 2e3074ab75b3..e647f5410879 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -462,7 +462,7 @@ static void __init sh7367_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2 IOMEM(0xe6158048)
 #define SYMSTPCR2_CMT1 (1 << 29)
 
 void __init sh7367_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 838a87be1d5c..a07954fbcd22 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1001,21 +1001,34 @@ static struct platform_device *sh7372_late_devices[] __initdata = {
 
 void __init sh7372_add_standard_devices(void)
 {
-	rmobile_init_pm_domain(&sh7372_pd_a4lc);
-	rmobile_init_pm_domain(&sh7372_pd_a4mp);
-	rmobile_init_pm_domain(&sh7372_pd_d4);
-	rmobile_init_pm_domain(&sh7372_pd_a4r);
-	rmobile_init_pm_domain(&sh7372_pd_a3rv);
-	rmobile_init_pm_domain(&sh7372_pd_a3ri);
-	rmobile_init_pm_domain(&sh7372_pd_a4s);
-	rmobile_init_pm_domain(&sh7372_pd_a3sp);
-	rmobile_init_pm_domain(&sh7372_pd_a3sg);
-
-	rmobile_pm_add_subdomain(&sh7372_pd_a4lc, &sh7372_pd_a3rv);
-	rmobile_pm_add_subdomain(&sh7372_pd_a4r, &sh7372_pd_a4lc);
-
-	rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sg);
-	rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sp);
+	struct pm_domain_device domain_devices[] = {
+		{ "A3RV", &vpu_device, },
+		{ "A4MP", &spu0_device, },
+		{ "A4MP", &spu1_device, },
+		{ "A3SP", &scif0_device, },
+		{ "A3SP", &scif1_device, },
+		{ "A3SP", &scif2_device, },
+		{ "A3SP", &scif3_device, },
+		{ "A3SP", &scif4_device, },
+		{ "A3SP", &scif5_device, },
+		{ "A3SP", &scif6_device, },
+		{ "A3SP", &iic1_device, },
+		{ "A3SP", &dma0_device, },
+		{ "A3SP", &dma1_device, },
+		{ "A3SP", &dma2_device, },
+		{ "A3SP", &usb_dma0_device, },
+		{ "A3SP", &usb_dma1_device, },
+		{ "A4R", &iic0_device, },
+		{ "A4R", &veu0_device, },
+		{ "A4R", &veu1_device, },
+		{ "A4R", &veu2_device, },
+		{ "A4R", &veu3_device, },
+		{ "A4R", &jpu_device, },
+		{ "A4R", &tmu00_device, },
+		{ "A4R", &tmu01_device, },
+	};
+
+	sh7372_init_pm_domains();
 
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
@@ -1023,30 +1036,8 @@ void __init sh7372_add_standard_devices(void)
 	platform_add_devices(sh7372_late_devices,
 			    ARRAY_SIZE(sh7372_late_devices));
 
-	rmobile_add_device_to_domain(&sh7372_pd_a3rv, &vpu_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif2_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif3_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif4_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif5_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif6_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &iic1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma2_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &iic0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu0_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu1_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu2_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu3_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &jpu_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu00_device);
-	rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu01_device);
+	rmobile_add_devices_to_domains(domain_devices,
+				       ARRAY_SIZE(domain_devices));
 }
 
 static void __init sh7372_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index 855b1506caf8..edcf98bb7012 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -484,7 +484,7 @@ static void __init sh7377_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-#define SMSTPCR3 0xe615013c
+#define SMSTPCR3 IOMEM(0xe615013c)
 #define SMSTPCR3_CMT1 (1 << 29)
 
 void __init sh7377_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index d230af656fc9..db99a4ade80c 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -734,6 +734,26 @@ static struct platform_device mpdma0_device = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start	= gic_spi(55),
+		.end	= gic_spi(55),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start	= gic_spi(56),
+		.end	= gic_spi(56),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pmu_resources),
+	.resource	= pmu_resources,
+};
+
 static struct platform_device *sh73a0_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -757,9 +777,10 @@ static struct platform_device *sh73a0_late_devices[] __initdata = {
 	&i2c4_device,
 	&dma0_device,
 	&mpdma0_device,
+	&pmu_device,
 };
 
-#define SRCR2          0xe61580b0
+#define SRCR2          IOMEM(0xe61580b0)
 
 void __init sh73a0_add_standard_devices(void)
 {
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/sh-gpio.h
index 844507d937cb..e834763ac2a5 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/sh-gpio.h
@@ -12,22 +12,8 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/sh_pfc.h>
 #include <linux/io.h>
 
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
 /*
  * FIXME !!
  *
@@ -35,12 +21,12 @@ static inline int irq_to_gpio(unsigned int irq)
  * the method to control only pull up/down/free.
  * this function should be replaced by correct gpio function
  */
-static inline void __init gpio_direction_none(u32 addr)
+static inline void __init gpio_direction_none(void __iomem * addr)
 {
 	__raw_writeb(0x00, addr);
 }
 
-static inline void __init gpio_request_pullup(u32 addr)
+static inline void __init gpio_request_pullup(void __iomem * addr)
 {
 	u8 data = __raw_readb(addr);
 
@@ -49,7 +35,7 @@ static inline void __init gpio_request_pullup(u32 addr)
 	__raw_writeb(data, addr);
 }
 
-static inline void __init gpio_request_pulldown(u32 addr)
+static inline void __init gpio_request_pulldown(void __iomem * addr)
 {
 	u8 data = __raw_readb(addr);
 
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 6a35c4a31e6c..f67456286280 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -50,7 +50,7 @@ static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 
 }
 
-unsigned int __init emev2_get_core_count(void)
+static unsigned int __init emev2_get_core_count(void)
 {
 	if (!scu_base) {
 		scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
@@ -62,17 +62,35 @@ unsigned int __init emev2_get_core_count(void)
 	return scu_base ? scu_get_core_count(scu_base) : 1;
 }
 
-int emev2_platform_cpu_kill(unsigned int cpu)
+static int emev2_platform_cpu_kill(unsigned int cpu)
 {
 	return 0; /* not supported yet */
 }
 
-void __cpuinit emev2_secondary_init(unsigned int cpu)
+static int __maybe_unused emev2_cpu_kill(unsigned int cpu)
+{
+	int k;
+
+	/* this function is running on another CPU than the offline target,
+	 * here we need wait for shutdown code in platform_cpu_die() to
+	 * finish before asking SoC-specific code to power off the CPU core.
+	 */
+	for (k = 0; k < 1000; k++) {
+		if (shmobile_cpu_is_dead(cpu))
+			return emev2_platform_cpu_kill(cpu);
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+
+static void __cpuinit emev2_secondary_init(unsigned int cpu)
 {
 	gic_secondary_init(0);
 }
 
-int __cpuinit emev2_boot_secondary(unsigned int cpu)
+static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	cpu = cpu_logical_map(cpu);
 
@@ -82,11 +100,11 @@ int __cpuinit emev2_boot_secondary(unsigned int cpu)
 	/* Tell ROM loader about our vector (in headsmp.S) */
 	emev2_set_boot_vector(__pa(shmobile_secondary_vector));
 
-	gic_raise_softirq(cpumask_of(cpu), 1);
+	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
 }
 
-void __init emev2_smp_prepare_cpus(void)
+static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu = cpu_logical_map(0);
 
@@ -95,3 +113,22 @@ void __init emev2_smp_prepare_cpus(void)
 	/* enable cache coherency on CPU0 */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }
+
+static void __init emev2_smp_init_cpus(void)
+{
+	unsigned int ncores = emev2_get_core_count();
+
+	shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations emev2_smp_ops __initdata = {
+	.smp_init_cpus		= emev2_smp_init_cpus,
+	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
+	.smp_secondary_init	= emev2_secondary_init,
+	.smp_boot_secondary	= emev2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= emev2_cpu_kill,
+	.cpu_die		= shmobile_cpu_die,
+	.cpu_disable		= shmobile_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 6d1d0238cbf7..2ce6af9a6a37 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -87,14 +87,14 @@ static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 	__raw_writel(tmp, scu_base + 8);
 }
 
-unsigned int __init r8a7779_get_core_count(void)
+static unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
 	return scu_get_core_count(scu_base);
 }
 
-int r8a7779_platform_cpu_kill(unsigned int cpu)
+static int r8a7779_platform_cpu_kill(unsigned int cpu)
 {
 	struct r8a7779_pm_ch *ch = NULL;
 	int ret = -EIO;
@@ -113,12 +113,31 @@ int r8a7779_platform_cpu_kill(unsigned int cpu)
 	return ret ? ret : 1;
 }
 
-void __cpuinit r8a7779_secondary_init(unsigned int cpu)
+static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu)
+{
+	int k;
+
+	/* this function is running on another CPU than the offline target,
+	 * here we need wait for shutdown code in platform_cpu_die() to
+	 * finish before asking SoC-specific code to power off the CPU core.
+	 */
+	for (k = 0; k < 1000; k++) {
+		if (shmobile_cpu_is_dead(cpu))
+			return r8a7779_platform_cpu_kill(cpu);
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+
+static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
 {
 	gic_secondary_init(0);
 }
 
-int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
+static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	struct r8a7779_pm_ch *ch = NULL;
 	int ret = -EIO;
@@ -137,7 +156,7 @@ int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
 	return ret;
 }
 
-void __init r8a7779_smp_prepare_cpus(void)
+static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu = cpu_logical_map(0);
 
@@ -156,3 +175,22 @@ void __init r8a7779_smp_prepare_cpus(void)
 	r8a7779_platform_cpu_kill(2);
 	r8a7779_platform_cpu_kill(3);
 }
+
+static void __init r8a7779_smp_init_cpus(void)
+{
+	unsigned int ncores = r8a7779_get_core_count();
+
+	shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations r8a7779_smp_ops  __initdata = {
+	.smp_init_cpus		= r8a7779_smp_init_cpus,
+	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
+	.smp_secondary_init	= r8a7779_secondary_init,
+	.smp_boot_secondary	= r8a7779_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= r8a7779_cpu_kill,
+	.cpu_die		= shmobile_cpu_die,
+	.cpu_disable		= shmobile_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index e36c41c4ab40..624f00f70abf 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -22,8 +22,10 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 #include <mach/common.h>
 #include <asm/smp_plat.h>
+#include <mach/sh73a0.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
@@ -64,19 +66,19 @@ static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 	__raw_writel(tmp, scu_base + 8);
 }
 
-unsigned int __init sh73a0_get_core_count(void)
+static unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
 	return scu_get_core_count(scu_base);
 }
 
-void __cpuinit sh73a0_secondary_init(unsigned int cpu)
+static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
 {
 	gic_secondary_init(0);
 }
 
-int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
+static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	cpu = cpu_logical_map(cpu);
 
@@ -91,7 +93,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	return 0;
 }
 
-void __init sh73a0_smp_prepare_cpus(void)
+static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu = cpu_logical_map(0);
 
@@ -104,3 +106,41 @@ void __init sh73a0_smp_prepare_cpus(void)
 	/* enable cache coherency on CPU0 */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }
+
+static void __init sh73a0_smp_init_cpus(void)
+{
+	unsigned int ncores = sh73a0_get_core_count();
+
+	shmobile_smp_init_cpus(ncores);
+}
+
+static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+{
+	int k;
+
+	/* this function is running on another CPU than the offline target,
+	 * here we need wait for shutdown code in platform_cpu_die() to
+	 * finish before asking SoC-specific code to power off the CPU core.
+	 */
+	for (k = 0; k < 1000; k++) {
+		if (shmobile_cpu_is_dead(cpu))
+			return 1;
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+
+struct smp_operations sh73a0_smp_ops __initdata = {
+	.smp_init_cpus		= sh73a0_smp_init_cpus,
+	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
+	.smp_secondary_init	= sh73a0_secondary_init,
+	.smp_boot_secondary	= sh73a0_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= sh73a0_cpu_kill,
+	.cpu_die		= shmobile_cpu_die,
+	.cpu_disable		= shmobile_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
new file mode 100644
index 000000000000..803a3281feb5
--- /dev/null
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -0,0 +1,16 @@
+config ARCH_SOCFPGA
+	bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select CACHE_L2X0
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_V7
+	select DW_APB_TIMER
+	select DW_APB_TIMER_OF
+	select GENERIC_CLOCKEVENTS
+	select GPIO_PL061 if GPIOLIB
+	select HAVE_ARM_SCU
+	select SPARSE_IRQ
+	select USE_OF
diff --git a/arch/arm/mach-socfpga/Makefile.boot b/arch/arm/mach-socfpga/Makefile.boot
deleted file mode 100644
index dae9661a7689..000000000000
--- a/arch/arm/mach-socfpga/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y	:= 0x00008000
diff --git a/arch/arm/mach-socfpga/include/mach/uncompress.h b/arch/arm/mach-socfpga/include/mach/uncompress.h
deleted file mode 100644
index bbe20e696325..000000000000
--- a/arch/arm/mach-socfpga/include/mach/uncompress.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
index 403efd7e6d27..4674a4c221db 100644
--- a/arch/arm/mach-spear13xx/Makefile.boot
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -1,6 +1,3 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
index 5c6867b46d09..a7d2dd11a4f2 100644
--- a/arch/arm/mach-spear13xx/hotplug.c
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -17,8 +17,6 @@
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
-extern volatile int pen_release;
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -56,7 +54,7 @@ static inline void cpu_leave_lowpower(void)
 	: "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
 {
 	for (;;) {
 		wfi();
@@ -79,17 +77,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void __cpuinit platform_cpu_die(unsigned int cpu)
+void __ref spear13xx_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
@@ -97,7 +90,7 @@ void __cpuinit platform_cpu_die(unsigned int cpu)
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
+	spear13xx_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
@@ -108,12 +101,3 @@ void __cpuinit platform_cpu_die(unsigned int cpu)
 	if (spurious)
 		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index dac57fd0cdfd..c33f4d9361bd 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -33,6 +33,9 @@ void __init spear13xx_l2x0_init(void);
 bool dw_dma_filter(struct dma_chan *chan, void *slave);
 void spear_restart(char, const char *);
 void spear13xx_secondary_startup(void);
+void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
 
 #ifdef CONFIG_MACH_SPEAR1310
 void __init spear1310_clk_init(void);
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
deleted file mode 100644
index 85f176311f63..000000000000
--- a/arch/arm/mach-spear13xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
index 65f27def239b..07d90acc92c8 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -17,26 +17,26 @@
 #include <asm/memory.h>
 
 #define PERIP_GRP2_BASE				UL(0xB3000000)
-#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
+#define VA_PERIP_GRP2_BASE			IOMEM(0xFE000000)
 #define MCIF_SDHCI_BASE				UL(0xB3000000)
 #define SYSRAM0_BASE				UL(0xB3800000)
-#define VA_SYSRAM0_BASE				UL(0xFE800000)
+#define VA_SYSRAM0_BASE				IOMEM(0xFE800000)
 #define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
 
 #define PERIP_GRP1_BASE				UL(0xE0000000)
-#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
+#define VA_PERIP_GRP1_BASE			IOMEM(0xFD000000)
 #define UART_BASE				UL(0xE0000000)
-#define VA_UART_BASE				UL(0xFD000000)
+#define VA_UART_BASE				IOMEM(0xFD000000)
 #define SSP_BASE				UL(0xE0100000)
 #define MISC_BASE				UL(0xE0700000)
-#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
+#define VA_MISC_BASE				IOMEM(0xFD700000)
 
 #define A9SM_AND_MPMC_BASE			UL(0xEC000000)
-#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
+#define VA_A9SM_AND_MPMC_BASE			IOMEM(0xFC000000)
 
 /* A9SM peripheral offsets */
 #define A9SM_PERIP_BASE				UL(0xEC800000)
-#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
+#define VA_A9SM_PERIP_BASE			IOMEM(0xFC800000)
 #define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
 
 #define L2CC_BASE				UL(0xED000000)
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
index f5d07f2663d7..2eaa3fa7b432 100644
--- a/arch/arm/mach-spear13xx/platsmp.c
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -19,18 +19,13 @@
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <mach/spear.h>
+#include <mach/generic.h>
 
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
 static DEFINE_SPINLOCK(boot_lock);
 
 static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
-extern void spear13xx_secondary_startup(void);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -53,7 +48,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -97,7 +92,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init spear13xx_smp_init_cpus(void)
 {
 	unsigned int i, ncores = scu_get_core_count(scu_base);
 
@@ -113,7 +108,7 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
 {
 
 	scu_enable(scu_base);
@@ -125,3 +120,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 */
 	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
 }
+
+struct smp_operations spear13xx_smp_ops __initdata = {
+       .smp_init_cpus		= spear13xx_smp_init_cpus,
+       .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
+       .smp_secondary_init	= spear13xx_secondary_init,
+       .smp_boot_secondary	= spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+       .cpu_die			= spear13xx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index 732d29bc7330..9fbbfc5650aa 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -78,6 +78,7 @@ static void __init spear1310_map_io(void)
 }
 
 DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.smp		=	smp_ops(spear13xx_smp_ops),
 	.map_io		=	spear1310_map_io,
 	.init_irq	=	spear13xx_dt_init_irq,
 	.handle_irq	=	gic_handle_irq,
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index 81e4ed76ad06..081014fb314a 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -182,6 +182,7 @@ static const char * const spear1340_dt_board_compat[] = {
 };
 
 DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.smp		=	smp_ops(spear13xx_smp_ops),
 	.map_io		=	spear13xx_map_io,
 	.init_irq	=	spear13xx_dt_init_irq,
 	.handle_irq	=	gic_handle_irq,
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index cf936b106e27..e10648801b2e 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -114,17 +114,17 @@ void __init spear13xx_l2x0_init(void)
  */
 struct map_desc spear13xx_io_desc[] __initdata = {
 	{
-		.virtual	= VA_PERIP_GRP2_BASE,
+		.virtual	= (unsigned long)VA_PERIP_GRP2_BASE,
 		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_PERIP_GRP1_BASE,
+		.virtual	= (unsigned long)VA_PERIP_GRP1_BASE,
 		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_A9SM_AND_MPMC_BASE,
+		.virtual	= (unsigned long)VA_A9SM_AND_MPMC_BASE,
 		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index d93e2177e6ec..4674a4c221db 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,7 +1,3 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SPEAR300)	+= spear300-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR310)	+= spear310-evb.dtb
-dtb-$(CONFIG_MACH_SPEAR320)	+= spear320-evb.dtb
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
deleted file mode 100644
index 2ac74c6db7f1..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
index af493da37ab6..4674a4c221db 100644
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -1,5 +1,3 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
deleted file mode 100644
index d42cefc0356d..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 9077aaa398d9..5f3c03b61f8e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -34,7 +34,6 @@ config ARCH_TEGRA_3x_SOC
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
-	select USE_OF
 	select ARM_ERRATA_743622
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_754322
@@ -60,25 +59,6 @@ config TEGRA_AHB
 
 comment "Tegra board type"
 
-config MACH_HARMONY
-       bool "Harmony board"
-       depends on ARCH_TEGRA_2x_SOC
-       help
-         Support for nVidia Harmony development platform
-
-config MACH_PAZ00
-       bool "Paz00 board"
-       depends on ARCH_TEGRA_2x_SOC
-       help
-         Support for the Toshiba AC100/Dynabook AZ netbook
-
-config MACH_TRIMSLICE
-       bool "TrimSlice board"
-       depends on ARCH_TEGRA_2x_SOC
-       select TEGRA_PCI
-       help
-         Support for CompuLab TrimSlice platform
-
 choice
         prompt "Default low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE
@@ -130,13 +110,6 @@ config TEGRA_DEBUG_UART_AUTO_SCRATCH
 
 endchoice
 
-config TEGRA_SYSTEM_DMA
-	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
-	default y
-	help
-	  Adds system DMA functionality for NVIDIA Tegra SoCs, used by
-	  several Tegra device drivers
-
 config TEGRA_EMC_SCALING_ENABLE
 	bool "Enable scaling the memory frequency"
 
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index c3d7303b9ac8..9aa653b3eb32 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,6 +1,4 @@
-obj-y                                   += board-pinmux.o
 obj-y                                   += common.o
-obj-y                                   += devices.o
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y                                   += clock.o
@@ -12,27 +10,22 @@ obj-y					+= powergate.o
 obj-y					+= apbio.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_CPU_IDLE)			+= sleep.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks_data.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-t20.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks_data.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-t30.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_SMP)                       += reset.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
-obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
 
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony.o
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pcie.o
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony-power.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-harmony-pcie.o
 
-obj-$(CONFIG_MACH_PAZ00)		+= board-paz00.o
-obj-$(CONFIG_MACH_PAZ00)		+= board-paz00-pinmux.o
-
-obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
-obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 7a1bb62ddcf0..29433816233c 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -1,11 +1,3 @@
 zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	+= 0x00008000
 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
-
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index dc0fe389be56..b5015d0f1912 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -28,7 +28,7 @@
 
 #include "apbio.h"
 
-#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA)
+#if defined(CONFIG_TEGRA20_APB_DMA)
 static DEFINE_MUTEX(tegra_apb_dma_lock);
 static u32 *tegra_apb_bb;
 static dma_addr_t tegra_apb_bb_phys;
@@ -37,121 +37,6 @@ static DECLARE_COMPLETION(tegra_apb_wait);
 static u32 tegra_apb_readl_direct(unsigned long offset);
 static void tegra_apb_writel_direct(u32 value, unsigned long offset);
 
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static struct tegra_dma_channel *tegra_apb_dma;
-
-bool tegra_apb_init(void)
-{
-	struct tegra_dma_channel *ch;
-
-	mutex_lock(&tegra_apb_dma_lock);
-
-	/* Check to see if we raced to setup */
-	if (tegra_apb_dma)
-		goto out;
-
-	ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
-		TEGRA_DMA_SHARED);
-
-	if (!ch)
-		goto out_fail;
-
-	tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
-		&tegra_apb_bb_phys, GFP_KERNEL);
-	if (!tegra_apb_bb) {
-		pr_err("%s: can not allocate bounce buffer\n", __func__);
-		tegra_dma_free_channel(ch);
-		goto out_fail;
-	}
-
-	tegra_apb_dma = ch;
-out:
-	mutex_unlock(&tegra_apb_dma_lock);
-	return true;
-
-out_fail:
-	mutex_unlock(&tegra_apb_dma_lock);
-	return false;
-}
-
-static void apb_dma_complete(struct tegra_dma_req *req)
-{
-	complete(&tegra_apb_wait);
-}
-
-static u32 tegra_apb_readl_using_dma(unsigned long offset)
-{
-	struct tegra_dma_req req;
-	int ret;
-
-	if (!tegra_apb_dma && !tegra_apb_init())
-		return tegra_apb_readl_direct(offset);
-
-	mutex_lock(&tegra_apb_dma_lock);
-	req.complete = apb_dma_complete;
-	req.to_memory = 1;
-	req.dest_addr = tegra_apb_bb_phys;
-	req.dest_bus_width = 32;
-	req.dest_wrap = 1;
-	req.source_addr = offset;
-	req.source_bus_width = 32;
-	req.source_wrap = 4;
-	req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
-	req.size = 4;
-
-	INIT_COMPLETION(tegra_apb_wait);
-
-	tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
-	ret = wait_for_completion_timeout(&tegra_apb_wait,
-		msecs_to_jiffies(50));
-
-	if (WARN(ret == 0, "apb read dma timed out")) {
-		tegra_dma_dequeue_req(tegra_apb_dma, &req);
-		*(u32 *)tegra_apb_bb = 0;
-	}
-
-	mutex_unlock(&tegra_apb_dma_lock);
-	return *((u32 *)tegra_apb_bb);
-}
-
-static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
-{
-	struct tegra_dma_req req;
-	int ret;
-
-	if (!tegra_apb_dma && !tegra_apb_init()) {
-		tegra_apb_writel_direct(value, offset);
-		return;
-	}
-
-	mutex_lock(&tegra_apb_dma_lock);
-	*((u32 *)tegra_apb_bb) = value;
-	req.complete = apb_dma_complete;
-	req.to_memory = 0;
-	req.dest_addr = offset;
-	req.dest_wrap = 4;
-	req.dest_bus_width = 32;
-	req.source_addr = tegra_apb_bb_phys;
-	req.source_bus_width = 32;
-	req.source_wrap = 1;
-	req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
-	req.size = 4;
-
-	INIT_COMPLETION(tegra_apb_wait);
-
-	tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
-	ret = wait_for_completion_timeout(&tegra_apb_wait,
-		msecs_to_jiffies(50));
-
-	if (WARN(ret == 0, "apb write dma timed out"))
-		tegra_dma_dequeue_req(tegra_apb_dma, &req);
-
-	mutex_unlock(&tegra_apb_dma_lock);
-}
-
-#else
 static struct dma_chan *tegra_apb_dma_chan;
 static struct dma_slave_config dma_sconfig;
 
@@ -279,7 +164,6 @@ static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
 		pr_err("error in writing offset 0x%08lx using dma\n", offset);
 	mutex_unlock(&tegra_apb_dma_lock);
 }
-#endif
 #else
 #define tegra_apb_readl_using_dma tegra_apb_readl_direct
 #define tegra_apb_writel_using_dma tegra_apb_writel_direct
@@ -293,12 +177,12 @@ static apbio_write_fptr apbio_write;
 
 static u32 tegra_apb_readl_direct(unsigned long offset)
 {
-	return readl(IO_TO_VIRT(offset));
+	return readl(IO_ADDRESS(offset));
 }
 
 static void tegra_apb_writel_direct(u32 value, unsigned long offset)
 {
-	writel(value, IO_TO_VIRT(offset));
+	writel(value, IO_ADDRESS(offset));
 }
 
 void tegra_apb_io_init(void)
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index c0999633a9ab..57e235f4ac74 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -28,9 +28,11 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/pda_power.h>
+#include <linux/platform_data/tegra_usb.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-tegra.h>
+#include <linux/usb/tegra_usb_phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -42,9 +44,32 @@
 #include <mach/irqs.h>
 
 #include "board.h"
-#include "board-harmony.h"
 #include "clock.h"
-#include "devices.h"
+#include "common.h"
+
+struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+	.operating_mode = TEGRA_USB_OTG,
+	.power_down_on_bus_suspend = 1,
+	.vbus_gpio = -1,
+};
+
+struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+	.reset_gpio = -1,
+	.clk = "cdev2",
+};
+
+struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+	.phy_config = &tegra_ehci2_ulpi_phy_config,
+	.operating_mode = TEGRA_USB_HOST,
+	.power_down_on_bus_suspend = 1,
+	.vbus_gpio = -1,
+};
+
+struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+	.operating_mode = TEGRA_USB_HOST,
+	.power_down_on_bus_suspend = 1,
+	.vbus_gpio = -1,
+};
 
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
@@ -71,6 +96,7 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 
 static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
 	/* name		parent		rate		enabled */
+	{ "uarta",	"pll_p",	216000000,	true },
 	{ "uartd",	"pll_p",	216000000,	true },
 	{ "usbd",	"clk_m",	12000000,	false },
 	{ "usb2",	"clk_m",	12000000,	false },
@@ -95,54 +121,40 @@ static void __init tegra_dt_init(void)
 				tegra20_auxdata_lookup, NULL);
 }
 
-#ifdef CONFIG_MACH_TRIMSLICE
 static void __init trimslice_init(void)
 {
+#ifdef CONFIG_TEGRA_PCI
 	int ret;
 
 	ret = tegra_pcie_init(true, true);
 	if (ret)
 		pr_err("tegra_pci_init() failed: %d\n", ret);
-}
 #endif
+}
 
-#ifdef CONFIG_MACH_HARMONY
 static void __init harmony_init(void)
 {
+#ifdef CONFIG_TEGRA_PCI
 	int ret;
 
-	ret = harmony_regulator_init();
-	if (ret) {
-		pr_err("harmony_regulator_init() failed: %d\n", ret);
-		return;
-	}
-
 	ret = harmony_pcie_init();
 	if (ret)
 		pr_err("harmony_pcie_init() failed: %d\n", ret);
-}
 #endif
+}
 
-#ifdef CONFIG_MACH_PAZ00
 static void __init paz00_init(void)
 {
 	tegra_paz00_wifikill_init();
 }
-#endif
 
 static struct {
 	char *machine;
 	void (*init)(void);
 } board_init_funcs[] = {
-#ifdef CONFIG_MACH_TRIMSLICE
 	{ "compulab,trimslice", trimslice_init },
-#endif
-#ifdef CONFIG_MACH_HARMONY
 	{ "nvidia,harmony", harmony_init },
-#endif
-#ifdef CONFIG_MACH_PAZ00
 	{ "compal,paz00", paz00_init },
-#endif
 };
 
 static void __init tegra_dt_init_late(void)
@@ -166,6 +178,7 @@ static const char *tegra20_dt_board_compat[] = {
 
 DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
 	.map_io		= tegra_map_common_io,
+	.smp		= smp_ops(tegra_smp_ops),
 	.init_early	= tegra20_init_early,
 	.init_irq	= tegra_dt_init_irq,
 	.handle_irq	= gic_handle_irq,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 53bf60f11580..e4a676d4ddf7 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -37,6 +37,7 @@
 
 #include "board.h"
 #include "clock.h"
+#include "common.h"
 
 struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
@@ -83,6 +84,7 @@ static const char *tegra30_dt_board_compat[] = {
 };
 
 DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
+	.smp		= smp_ops(tegra_smp_ops),
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra30_init_early,
 	.init_irq	= tegra_dt_init_irq,
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index e8c3fda9bec2..3cdc1bb8254c 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -18,35 +18,57 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <linux/err.h>
+#include <linux/of_gpio.h>
 #include <linux/regulator/consumer.h>
 
 #include <asm/mach-types.h>
 
 #include "board.h"
-#include "board-harmony.h"
 
 #ifdef CONFIG_TEGRA_PCI
 
 int __init harmony_pcie_init(void)
 {
+	struct device_node *np;
+	int en_vdd_1v05;
 	struct regulator *regulator = NULL;
 	int err;
 
-	err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
-	if (err)
+	np = of_find_node_by_path("/regulators/regulator@3");
+	if (!np) {
+		pr_err("%s: of_find_node_by_path failed\n", __func__);
+		return -ENODEV;
+	}
+
+	en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0);
+	if (en_vdd_1v05 < 0) {
+		pr_err("%s: of_get_named_gpio failed: %d\n", __func__,
+		       en_vdd_1v05);
+		return en_vdd_1v05;
+	}
+
+	err = gpio_request(en_vdd_1v05, "EN_VDD_1V05");
+	if (err) {
+		pr_err("%s: gpio_request failed: %d\n", __func__, err);
 		return err;
+	}
 
-	gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
+	gpio_direction_output(en_vdd_1v05, 1);
 
-	regulator = regulator_get(NULL, "pex_clk");
-	if (IS_ERR_OR_NULL(regulator))
+	regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
+	if (IS_ERR_OR_NULL(regulator)) {
+		pr_err("%s: regulator_get failed: %d\n", __func__,
+		       (int)PTR_ERR(regulator));
 		goto err_reg;
+	}
 
 	regulator_enable(regulator);
 
 	err = tegra_pcie_init(true, true);
-	if (err)
+	if (err) {
+		pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
 		goto err_pcie;
+	}
 
 	return 0;
 
@@ -54,20 +76,9 @@ err_pcie:
 	regulator_disable(regulator);
 	regulator_put(regulator);
 err_reg:
-	gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
+	gpio_free(en_vdd_1v05);
 
 	return err;
 }
 
-static int __init harmony_pcie_initcall(void)
-{
-	if (!machine_is_harmony())
-		return 0;
-
-	return harmony_pcie_init();
-}
-
-/* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_initcall);
-
 #endif
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
deleted file mode 100644
index 83d420fbc58c..000000000000
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pinmux.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-harmony.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map harmony_map[] = {
-	TEGRA_MAP_MUXCONF("ata",   "ide",           none, driven),
-	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("atc",   "nand",          none, driven),
-	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
-	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     down, tristate),
-	TEGRA_MAP_MUXCONF("crtp",  "crt",           none, tristate),
-	TEGRA_MAP_MUXCONF("csus",  "vi_sensor_clk", down, tristate),
-	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
-	TEGRA_MAP_MUXCONF("dap2",  "dap2",          none, tristate),
-	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
-	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, tristate),
-	TEGRA_MAP_MUXCONF("ddc",   "i2c2",          up,   driven),
-	TEGRA_MAP_MUXCONF("dta",   "sdio2",         up,   driven),
-	TEGRA_MAP_MUXCONF("dtb",   "rsvd1",         none, driven),
-	TEGRA_MAP_MUXCONF("dtc",   "rsvd1",         none, tristate),
-	TEGRA_MAP_MUXCONF("dtd",   "sdio2",         up,   driven),
-	TEGRA_MAP_MUXCONF("dte",   "rsvd1",         none, tristate),
-	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          none, tristate),
-	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gmb",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("gmc",   "uartd",         none, driven),
-	TEGRA_MAP_MUXCONF("gmd",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("gme",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gpu",   "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
-	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   tristate),
-	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, driven),
-	TEGRA_MAP_MUXCONF("irrx",  "uarta",         up,   tristate),
-	TEGRA_MAP_MUXCONF("irtx",  "uarta",         up,   tristate),
-	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcb",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcd",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("lcsn",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ldc",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lm0",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lm1",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lpw1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsdi",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvp0",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("owc",   "rsvd2",         na,   tristate),
-	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   driven),
-	TEGRA_MAP_MUXCONF("pta",   "hdmi",          none, driven),
-	TEGRA_MAP_MUXCONF("rm",    "i2c1",          none, driven),
-	TEGRA_MAP_MUXCONF("sdb",   "pwm",           na,   tristate),
-	TEGRA_MAP_MUXCONF("sdc",   "pwm",           up,   driven),
-	TEGRA_MAP_MUXCONF("sdd",   "pwm",           up,   tristate),
-	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         none, tristate),
-	TEGRA_MAP_MUXCONF("slxa",  "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("slxc",  "spdif",         none, tristate),
-	TEGRA_MAP_MUXCONF("slxd",  "spdif",         none, tristate),
-	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("spdi",  "rsvd2",         none, tristate),
-	TEGRA_MAP_MUXCONF("spdo",  "rsvd2",         none, tristate),
-	TEGRA_MAP_MUXCONF("spia",  "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("spib",  "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("spic",  "gmi",           up,   tristate),
-	TEGRA_MAP_MUXCONF("spid",  "spi1",          down, tristate),
-	TEGRA_MAP_MUXCONF("spie",  "spi1",          up,   tristate),
-	TEGRA_MAP_MUXCONF("spif",  "spi1",          down, tristate),
-	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      none, tristate),
-	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
-	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   tristate),
-	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   tristate),
-	TEGRA_MAP_MUXCONF("uac",   "rsvd2",         none, tristate),
-	TEGRA_MAP_MUXCONF("uad",   "irda",          up,   tristate),
-	TEGRA_MAP_MUXCONF("uca",   "uartc",         up,   tristate),
-	TEGRA_MAP_MUXCONF("ucb",   "uartc",         up,   tristate),
-	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, tristate),
-	TEGRA_MAP_CONF("ck32",    none, na),
-	TEGRA_MAP_CONF("ddrc",    none, na),
-	TEGRA_MAP_CONF("pmca",    none, na),
-	TEGRA_MAP_CONF("pmcb",    none, na),
-	TEGRA_MAP_CONF("pmcc",    none, na),
-	TEGRA_MAP_CONF("pmcd",    none, na),
-	TEGRA_MAP_CONF("pmce",    none, na),
-	TEGRA_MAP_CONF("xm2c",    none, na),
-	TEGRA_MAP_CONF("xm2d",    none, na),
-	TEGRA_MAP_CONF("ls",      up,   na),
-	TEGRA_MAP_CONF("lc",      up,   na),
-	TEGRA_MAP_CONF("ld17_0",  down, na),
-	TEGRA_MAP_CONF("ld19_18", down, na),
-	TEGRA_MAP_CONF("ld21_20", down, na),
-	TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
-	.maps = harmony_map,
-	.map_count = ARRAY_SIZE(harmony_map),
-};
-
-void harmony_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
deleted file mode 100644
index 8fd387bf31f0..000000000000
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA
- */
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/tps6586x.h>
-#include <linux/of.h>
-#include <linux/of_i2c.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-
-#include "board-harmony.h"
-
-static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
-	REGULATOR_SUPPLY("pex_clk", NULL),
-};
-
-static struct regulator_init_data ldo0_data = {
-	.supply_regulator = "vdd_sm2",
-	.constraints = {
-		.name = "vdd_ldo0",
-		.min_uV = 3300 * 1000,
-		.max_uV = 3300 * 1000,
-		.valid_modes_mask = (REGULATOR_MODE_NORMAL |
-				     REGULATOR_MODE_STANDBY),
-		.valid_ops_mask = (REGULATOR_CHANGE_MODE |
-				   REGULATOR_CHANGE_STATUS |
-				   REGULATOR_CHANGE_VOLTAGE),
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply),
-	.consumer_supplies = tps658621_ldo0_supply,
-};
-
-#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv)	\
-	static struct regulator_init_data _id##_data = {		\
-		.supply_regulator = _supply,				\
-		.constraints = {					\
-			.name = _name,					\
-			.min_uV = (_minmv)*1000,			\
-			.max_uV = (_maxmv)*1000,			\
-			.valid_modes_mask = (REGULATOR_MODE_NORMAL |	\
-					     REGULATOR_MODE_STANDBY),	\
-			.valid_ops_mask = (REGULATOR_CHANGE_MODE |	\
-					   REGULATOR_CHANGE_STATUS |	\
-					   REGULATOR_CHANGE_VOLTAGE),	\
-		},							\
-	}
-
-HARMONY_REGULATOR_INIT(sm0,  "vdd_sm0",  "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm1,  "vdd_sm1",  "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm2,  "vdd_sm2",  "vdd_sys", 3000, 4550);
-HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475);
-HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL,	    1250, 3300);
-HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300);
-
-#define TPS_REG(_id, _data)			\
-	{					\
-		.id = TPS6586X_ID_##_id,	\
-		.name = "tps6586x-regulator",	\
-		.platform_data = _data,		\
-	}
-
-static struct tps6586x_subdev_info tps_devs[] = {
-	TPS_REG(SM_0, &sm0_data),
-	TPS_REG(SM_1, &sm1_data),
-	TPS_REG(SM_2, &sm2_data),
-	TPS_REG(LDO_0, &ldo0_data),
-	TPS_REG(LDO_1, &ldo1_data),
-	TPS_REG(LDO_2, &ldo2_data),
-	TPS_REG(LDO_3, &ldo3_data),
-	TPS_REG(LDO_4, &ldo4_data),
-	TPS_REG(LDO_5, &ldo5_data),
-	TPS_REG(LDO_6, &ldo6_data),
-	TPS_REG(LDO_7, &ldo7_data),
-	TPS_REG(LDO_8, &ldo8_data),
-	TPS_REG(LDO_9, &ldo9_data),
-};
-
-static struct tps6586x_platform_data tps_platform = {
-	.irq_base	= TEGRA_NR_IRQS,
-	.num_subdevs	= ARRAY_SIZE(tps_devs),
-	.subdevs	= tps_devs,
-	.gpio_base	= HARMONY_GPIO_TPS6586X(0),
-};
-
-static struct i2c_board_info __initdata harmony_regulators[] = {
-	{
-		I2C_BOARD_INFO("tps6586x", 0x34),
-		.irq		= INT_EXTERNAL_PMU,
-		.platform_data	= &tps_platform,
-	},
-};
-
-int __init harmony_regulator_init(void)
-{
-	if (machine_is_harmony()) {
-		regulator_register_always_on(0, "vdd_sys",
-			NULL, 0, 5000000);
-		i2c_register_board_info(3, harmony_regulators, 1);
-	} else { /* Harmony, booted using device tree */
-		struct device_node *np;
-		struct i2c_adapter *adapter;
-
-		np = of_find_node_by_path("/i2c@7000d000");
-		if (np == NULL) {
-			pr_err("Could not find device_node for DVC I2C\n");
-			return -ENODEV;
-		}
-
-		adapter = of_find_i2c_adapter_by_node(np);
-		if (!adapter) {
-			pr_err("Could not find i2c_adapter for DVC I2C\n");
-			return -ENODEV;
-		}
-
-		i2c_new_device(adapter, harmony_regulators);
-	}
-
-	return 0;
-}
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
deleted file mode 100644
index e65e837f4013..000000000000
--- a/arch/arm/mach-tegra/board-harmony.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <sound/wm8903.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/tegra_wm8903_pdata.h>
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "board-harmony.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
-		.mapbase	= TEGRA_UARTD_BASE,
-		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
-
-static struct tegra_wm8903_platform_data harmony_audio_pdata = {
-	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
-	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
-	.gpio_hp_mute		= -1,
-	.gpio_int_mic_en	= TEGRA_GPIO_INT_MIC_EN,
-	.gpio_ext_mic_en	= TEGRA_GPIO_EXT_MIC_EN,
-};
-
-static struct platform_device harmony_audio_device = {
-	.name	= "tegra-snd-wm8903",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &harmony_audio_pdata,
-	},
-};
-
-static struct wm8903_platform_data harmony_wm8903_pdata = {
-	.irq_active_low = 0,
-	.micdet_cfg = 0,
-	.micdet_delay = 100,
-	.gpio_base = HARMONY_GPIO_WM8903(0),
-	.gpio_cfg = {
-		0,
-		0,
-		WM8903_GPIO_CONFIG_ZERO,
-		0,
-		0,
-	},
-};
-
-static struct i2c_board_info __initdata wm8903_board_info = {
-	I2C_BOARD_INFO("wm8903", 0x1a),
-	.platform_data = &harmony_wm8903_pdata,
-};
-
-static void __init harmony_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-	platform_device_register(&tegra_i2c_device4);
-
-	wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
-	i2c_register_board_info(0, &wm8903_board_info, 1);
-}
-
-static struct platform_device *harmony_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device1,
-	&tegra_sdhci_device2,
-	&tegra_sdhci_device4,
-	&tegra_ehci3_device,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&harmony_audio_device,
-};
-
-static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-	mi->bank[1].start = SZ_512M;
-	mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uartd",	"pll_p",	216000000,	true },
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ "usb3",	"clk_m",	12000000,	true },
-	{ NULL,		NULL,		0,		0},
-};
-
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
-	.cd_gpio	= TEGRA_GPIO_SD2_CD,
-	.wp_gpio	= TEGRA_GPIO_SD2_WP,
-	.power_gpio	= TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= TEGRA_GPIO_SD4_CD,
-	.wp_gpio	= TEGRA_GPIO_SD4_WP,
-	.power_gpio	= TEGRA_GPIO_SD4_POWER,
-	.is_8bit	= 1,
-};
-
-static void __init tegra_harmony_init(void)
-{
-	tegra_clk_init_from_table(harmony_clk_init_table);
-
-	harmony_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
-	harmony_i2c_init();
-	harmony_regulator_init();
-}
-
-MACHINE_START(HARMONY, "harmony")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_harmony_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_harmony_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
deleted file mode 100644
index 139d96c93843..000000000000
--- a/arch/arm/mach-tegra/board-harmony.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_HARMONY_H
-#define _MACH_TEGRA_BOARD_HARMONY_H
-
-#include <mach/gpio-tegra.h>
-
-#define HARMONY_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
-#define HARMONY_GPIO_WM8903(_x_)	(HARMONY_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER		TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD		TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP		TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER		TEGRA_GPIO_PI6
-#define TEGRA_GPIO_CDC_IRQ		TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN		HARMONY_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PW2
-#define TEGRA_GPIO_INT_MIC_EN		TEGRA_GPIO_PX0
-#define TEGRA_GPIO_EXT_MIC_EN		TEGRA_GPIO_PX1
-#define TEGRA_GPIO_EN_VDD_1V05_GPIO	HARMONY_GPIO_TPS6586X(2)
-
-void harmony_pinmux_init(void);
-int harmony_regulator_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
deleted file mode 100644
index 6f1111b48e7c..000000000000
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00-pinmux.c
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-paz00.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map paz00_map[] = {
-	TEGRA_MAP_MUXCONF("ata",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("atc",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
-	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     down, driven),
-	TEGRA_MAP_MUXCONF("crtp",  "crt",           none, tristate),
-	TEGRA_MAP_MUXCONF("csus",  "pllc_out1",     down, tristate),
-	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
-	TEGRA_MAP_MUXCONF("dap2",  "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
-	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, tristate),
-	TEGRA_MAP_MUXCONF("ddc",   "i2c2",          up,   driven),
-	TEGRA_MAP_MUXCONF("dta",   "rsvd1",         up,   tristate),
-	TEGRA_MAP_MUXCONF("dtb",   "rsvd1",         none, tristate),
-	TEGRA_MAP_MUXCONF("dtc",   "rsvd1",         none, tristate),
-	TEGRA_MAP_MUXCONF("dtd",   "rsvd1",         up,   tristate),
-	TEGRA_MAP_MUXCONF("dte",   "rsvd1",         none, tristate),
-	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          none, driven),
-	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gmb",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("gmc",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("gmd",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("gme",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gpu",   "pwm",           none, driven),
-	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
-	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   driven),
-	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, driven),
-	TEGRA_MAP_MUXCONF("irrx",  "uarta",         up,   driven),
-	TEGRA_MAP_MUXCONF("irtx",  "uarta",         up,   driven),
-	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcb",  "sdio2",         up,   driven),
-	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcd",  "sdio2",         up,   driven),
-	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("lcsn",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ldc",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lm0",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lm1",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpw1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsdi",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvp0",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("owc",   "owr",           up,   tristate),
-	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   driven),
-	TEGRA_MAP_MUXCONF("pta",   "hdmi",          none, driven),
-	TEGRA_MAP_MUXCONF("rm",    "i2c1",          none, driven),
-	TEGRA_MAP_MUXCONF("sdb",   "pwm",           na,   tristate),
-	TEGRA_MAP_MUXCONF("sdc",   "twc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("sdd",   "pwm",           up,   tristate),
-	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         none, driven),
-	TEGRA_MAP_MUXCONF("slxa",  "pcie",          none, tristate),
-	TEGRA_MAP_MUXCONF("slxc",  "spi4",          none, tristate),
-	TEGRA_MAP_MUXCONF("slxd",  "spi4",          none, tristate),
-	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("spdi",  "rsvd2",         none, tristate),
-	TEGRA_MAP_MUXCONF("spdo",  "rsvd2",         none, driven),
-	TEGRA_MAP_MUXCONF("spia",  "gmi",           down, tristate),
-	TEGRA_MAP_MUXCONF("spib",  "gmi",           down, tristate),
-	TEGRA_MAP_MUXCONF("spic",  "gmi",           up,   driven),
-	TEGRA_MAP_MUXCONF("spid",  "gmi",           down, tristate),
-	TEGRA_MAP_MUXCONF("spie",  "gmi",           up,   tristate),
-	TEGRA_MAP_MUXCONF("spif",  "rsvd4",         down, tristate),
-	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      up,   driven),
-	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
-	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   driven),
-	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   driven),
-	TEGRA_MAP_MUXCONF("uac",   "rsvd4",         none, driven),
-	TEGRA_MAP_MUXCONF("uad",   "spdif",         up,   tristate),
-	TEGRA_MAP_MUXCONF("uca",   "uartc",         up,   tristate),
-	TEGRA_MAP_MUXCONF("ucb",   "uartc",         up,   tristate),
-	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, driven),
-	TEGRA_MAP_CONF("ck32",    none, na),
-	TEGRA_MAP_CONF("ddrc",    none, na),
-	TEGRA_MAP_CONF("pmca",    none, na),
-	TEGRA_MAP_CONF("pmcb",    none, na),
-	TEGRA_MAP_CONF("pmcc",    none, na),
-	TEGRA_MAP_CONF("pmcd",    none, na),
-	TEGRA_MAP_CONF("pmce",    none, na),
-	TEGRA_MAP_CONF("xm2c",    none, na),
-	TEGRA_MAP_CONF("xm2d",    none, na),
-	TEGRA_MAP_CONF("ls",      up,   na),
-	TEGRA_MAP_CONF("lc",      up,   na),
-	TEGRA_MAP_CONF("ld17_0",  down, na),
-	TEGRA_MAP_CONF("ld19_18", down, na),
-	TEGRA_MAP_CONF("ld21_20", down, na),
-	TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
-	.maps = paz00_map,
-	.map_count = ARRAY_SIZE(paz00_map),
-};
-
-void paz00_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 4b64af5cab27..740e16f64728 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,72 +17,10 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio_keys.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/rfkill-gpio.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
 #include "board.h"
 #include "board-paz00.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		/* serial port on JP1 */
-		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
-		.mapbase	= TEGRA_UARTA_BASE,
-		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		/* serial port on mini-pcie */
-		.membase	= IO_ADDRESS(TEGRA_UARTC_BASE),
-		.mapbase	= TEGRA_UARTC_BASE,
-		.irq		= INT_UARTC,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
 
 static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
 	.name		= "wifi_rfkill",
@@ -99,137 +37,7 @@ static struct platform_device wifi_rfkill_device = {
 	},
 };
 
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "wifi-led",
-		.default_trigger	= "rfkill0",
-		.gpio			= TEGRA_WIFI_LED,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &gpio_led_info,
-        },
-};
-
-static struct gpio_keys_button paz00_gpio_keys_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= TEGRA_GPIO_POWERKEY,
-		.active_low	= 1,
-		.desc		= "Power",
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data paz00_gpio_keys = {
-	.buttons	= paz00_gpio_keys_buttons,
-	.nbuttons	= ARRAY_SIZE(paz00_gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &paz00_gpio_keys,
-	},
-};
-
-static struct platform_device *paz00_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device4,
-	&tegra_sdhci_device1,
-	&leds_gpio,
-	&gpio_keys_device,
-};
-
-static void paz00_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device4);
-}
-
-static void paz00_usb_init(void)
-{
-	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
-
-	platform_device_register(&tegra_ehci2_device);
-	platform_device_register(&tegra_ehci3_device);
-}
-
-static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-}
-
-static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uarta",	"pll_p",	216000000,	true },
-	{ "uartc",	"pll_p",	216000000,	true },
-
-	{ "usbd",	"clk_m",	12000000,	false },
-	{ "usb2",	"clk_m",	12000000,	false },
-	{ "usb3",	"clk_m",	12000000,	false },
-
-	{ NULL,		NULL,		0,		0},
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= TEGRA_GPIO_SD1_CD,
-	.wp_gpio	= TEGRA_GPIO_SD1_WP,
-	.power_gpio	= TEGRA_GPIO_SD1_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-	.is_8bit	= 1,
-};
-
 void __init tegra_paz00_wifikill_init(void)
 {
 	platform_device_register(&wifi_rfkill_device);
 }
-
-static void __init tegra_paz00_init(void)
-{
-	tegra_clk_init_from_table(paz00_clk_init_table);
-
-	paz00_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
-	tegra_paz00_wifikill_init();
-
-	paz00_i2c_init();
-	paz00_usb_init();
-}
-
-MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_paz00_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_paz00_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index 3c9f8da37ea3..25c08ecef52f 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,24 +17,9 @@
 #ifndef _MACH_TEGRA_BOARD_PAZ00_H
 #define _MACH_TEGRA_BOARD_PAZ00_H
 
-#include <mach/gpio-tegra.h>
+#include "gpio-names.h"
 
-/* SDCARD */
-#define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PV1
-
-/* ULPI */
-#define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
-
-/* WIFI */
 #define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
 #define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
-#define TEGRA_WIFI_LED			TEGRA_GPIO_PD0
-
-/* WakeUp */
-#define TEGRA_GPIO_POWERKEY	TEGRA_GPIO_PJ7
-
-void paz00_pinmux_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/board-pinmux.c b/arch/arm/mach-tegra/board-pinmux.c
deleted file mode 100644
index a5574c71b931..000000000000
--- a/arch/arm/mach-tegra/board-pinmux.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (c) 2011,2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/notifier.h>
-#include <linux/string.h>
-
-#include "board-pinmux.h"
-#include "devices.h"
-
-unsigned long tegra_pincfg_pullnone_driven[2] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
-};
-
-unsigned long tegra_pincfg_pullnone_tristate[2] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
-};
-
-unsigned long tegra_pincfg_pullnone_na[1] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
-};
-
-unsigned long tegra_pincfg_pullup_driven[2] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
-};
-
-unsigned long tegra_pincfg_pullup_tristate[2] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
-};
-
-unsigned long tegra_pincfg_pullup_na[1] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
-};
-
-unsigned long tegra_pincfg_pulldown_driven[2] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
-};
-
-unsigned long tegra_pincfg_pulldown_tristate[2] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
-};
-
-unsigned long tegra_pincfg_pulldown_na[1] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
-};
-
-unsigned long tegra_pincfg_pullna_driven[1] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
-};
-
-unsigned long tegra_pincfg_pullna_tristate[1] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
-};
-
-static struct platform_device *devices[] = {
-	&tegra_gpio_device,
-	&tegra_pinmux_device,
-};
-
-void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
-			     struct tegra_board_pinmux_conf *conf_b)
-{
-	if (conf_a)
-		pinctrl_register_mappings(conf_a->maps, conf_a->map_count);
-	if (conf_b)
-		pinctrl_register_mappings(conf_b->maps, conf_b->map_count);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-tegra/board-pinmux.h b/arch/arm/mach-tegra/board-pinmux.h
deleted file mode 100644
index c5f3f3381e86..000000000000
--- a/arch/arm/mach-tegra/board-pinmux.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 2011,2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_BOARD_PINMUX_H
-#define __MACH_TEGRA_BOARD_PINMUX_H
-
-#include <linux/pinctrl/machine.h>
-
-#include <mach/pinconf-tegra.h>
-
-#define PINMUX_DEV "tegra20-pinctrl"
-
-#define TEGRA_MAP_MUX(_group_, _function_) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT(PINMUX_DEV, _group_, _function_)
-
-#define TEGRA_MAP_CONF(_group_, _pull_, _drive_) \
-	PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, _group_, tegra_pincfg_pull##_pull_##_##_drive_)
-
-#define TEGRA_MAP_MUXCONF(_group_, _function_, _pull_, _drive_) \
-	TEGRA_MAP_MUX(_group_, _function_), \
-	TEGRA_MAP_CONF(_group_, _pull_, _drive_)
-
-extern unsigned long tegra_pincfg_pullnone_driven[2];
-extern unsigned long tegra_pincfg_pullnone_tristate[2];
-extern unsigned long tegra_pincfg_pullnone_na[1];
-extern unsigned long tegra_pincfg_pullup_driven[2];
-extern unsigned long tegra_pincfg_pullup_tristate[2];
-extern unsigned long tegra_pincfg_pullup_na[1];
-extern unsigned long tegra_pincfg_pulldown_driven[2];
-extern unsigned long tegra_pincfg_pulldown_tristate[2];
-extern unsigned long tegra_pincfg_pulldown_na[1];
-extern unsigned long tegra_pincfg_pullna_driven[1];
-extern unsigned long tegra_pincfg_pullna_tristate[1];
-
-struct tegra_board_pinmux_conf {
-	struct pinctrl_map *maps;
-	int map_count;
-};
-
-void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
-			     struct tegra_board_pinmux_conf *conf_b);
-
-#endif
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
deleted file mode 100644
index 7b39511c0d4d..000000000000
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice-pinmux.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/kernel.h>
-
-#include "board-trimslice.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map trimslice_map[] = {
-	TEGRA_MAP_MUXCONF("ata",   "ide",           none, tristate),
-	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("atc",   "nand",          none, tristate),
-	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
-	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     down, tristate),
-	TEGRA_MAP_MUXCONF("crtp",  "crt",           none, tristate),
-	TEGRA_MAP_MUXCONF("csus",  "vi_sensor_clk", down, tristate),
-	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
-	TEGRA_MAP_MUXCONF("dap2",  "dap2",          none, tristate),
-	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
-	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, tristate),
-	TEGRA_MAP_MUXCONF("ddc",   "i2c2",          up,   driven),
-	TEGRA_MAP_MUXCONF("dta",   "vi",            none, tristate),
-	TEGRA_MAP_MUXCONF("dtb",   "vi",            none, tristate),
-	TEGRA_MAP_MUXCONF("dtc",   "vi",            none, tristate),
-	TEGRA_MAP_MUXCONF("dtd",   "vi",            none, tristate),
-	TEGRA_MAP_MUXCONF("dte",   "vi",            none, tristate),
-	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          up,   driven),
-	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gmb",   "nand",          none, tristate),
-	TEGRA_MAP_MUXCONF("gmc",   "sflash",        none, driven),
-	TEGRA_MAP_MUXCONF("gmd",   "sflash",        none, driven),
-	TEGRA_MAP_MUXCONF("gme",   "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("gpu",   "uarta",         none, driven),
-	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
-	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   tristate),
-	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, tristate),
-	TEGRA_MAP_MUXCONF("irrx",  "uartb",         up,   tristate),
-	TEGRA_MAP_MUXCONF("irtx",  "uartb",         up,   tristate),
-	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("kbcb",  "kbc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("kbcd",  "kbc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   tristate),
-	TEGRA_MAP_MUXCONF("lcsn",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ldc",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lm0",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lm1",   "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lpw1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsdi",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvp0",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("owc",   "rsvd2",         up,   tristate),
-	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   tristate),
-	TEGRA_MAP_MUXCONF("pta",   "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("rm",    "i2c1",          up,   driven),
-	TEGRA_MAP_MUXCONF("sdb",   "pwm",           na,   driven),
-	TEGRA_MAP_MUXCONF("sdc",   "pwm",           up,   driven),
-	TEGRA_MAP_MUXCONF("sdd",   "pwm",           up,   driven),
-	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         none, driven),
-	TEGRA_MAP_MUXCONF("slxa",  "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("slxc",  "sdio3",         none, tristate),
-	TEGRA_MAP_MUXCONF("slxd",  "sdio3",         none, tristate),
-	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("spdi",  "spdif",         none, tristate),
-	TEGRA_MAP_MUXCONF("spdo",  "spdif",         none, tristate),
-	TEGRA_MAP_MUXCONF("spia",  "spi2",          down, tristate),
-	TEGRA_MAP_MUXCONF("spib",  "spi2",          down, tristate),
-	TEGRA_MAP_MUXCONF("spic",  "spi2",          up,   tristate),
-	TEGRA_MAP_MUXCONF("spid",  "spi1",          down, tristate),
-	TEGRA_MAP_MUXCONF("spie",  "spi1",          up,   tristate),
-	TEGRA_MAP_MUXCONF("spif",  "spi1",          down, tristate),
-	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      up,   tristate),
-	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
-	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   tristate),
-	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   tristate),
-	TEGRA_MAP_MUXCONF("uac",   "rsvd2",         none, driven),
-	TEGRA_MAP_MUXCONF("uad",   "irda",          up,   tristate),
-	TEGRA_MAP_MUXCONF("uca",   "uartc",         up,   tristate),
-	TEGRA_MAP_MUXCONF("ucb",   "uartc",         up,   tristate),
-	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, tristate),
-	TEGRA_MAP_CONF("ck32",    none, na),
-	TEGRA_MAP_CONF("ddrc",    none, na),
-	TEGRA_MAP_CONF("pmca",    none, na),
-	TEGRA_MAP_CONF("pmcb",    none, na),
-	TEGRA_MAP_CONF("pmcc",    none, na),
-	TEGRA_MAP_CONF("pmcd",    none, na),
-	TEGRA_MAP_CONF("pmce",    none, na),
-	TEGRA_MAP_CONF("xm2c",    none, na),
-	TEGRA_MAP_CONF("xm2d",    none, na),
-	TEGRA_MAP_CONF("ls",      up,   na),
-	TEGRA_MAP_CONF("lc",      up,   na),
-	TEGRA_MAP_CONF("ld17_0",  down, na),
-	TEGRA_MAP_CONF("ld19_18", down, na),
-	TEGRA_MAP_CONF("ld21_20", down, na),
-	TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
-	.maps = trimslice_map,
-	.map_count = ARRAY_SIZE(trimslice_map),
-};
-
-void trimslice_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
deleted file mode 100644
index 776aa9564d5d..000000000000
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on board-harmony.c
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-#include "board-trimslice.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
-		.mapbase	= TEGRA_UARTA_BASE,
-		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data	= debug_uart_platform_data,
-	},
-};
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= TRIMSLICE_GPIO_SD4_CD,
-	.wp_gpio	= TRIMSLICE_GPIO_SD4_WP,
-	.power_gpio	= -1,
-};
-
-static struct platform_device trimslice_audio_device = {
-	.name	= "tegra-snd-trimslice",
-	.id	= 0,
-};
-
-static struct platform_device *trimslice_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device1,
-	&tegra_sdhci_device4,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&trimslice_audio_device,
-};
-
-static struct i2c_board_info trimslice_i2c3_board_info[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-	{
-		I2C_BOARD_INFO("em3027", 0x56),
-	},
-};
-
-static void trimslice_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-
-	i2c_register_board_info(2, trimslice_i2c3_board_info,
-				ARRAY_SIZE(trimslice_i2c3_board_info));
-}
-
-static void trimslice_usb_init(void)
-{
-	struct tegra_ehci_platform_data *pdata;
-
-	pdata = tegra_ehci1_device.dev.platform_data;
-	pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
-
-	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
-
-	platform_device_register(&tegra_ehci3_device);
-	platform_device_register(&tegra_ehci2_device);
-	platform_device_register(&tegra_ehci1_device);
-}
-
-static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-	mi->bank[1].start = SZ_512M;
-	mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uarta",	"pll_p",	216000000,	true },
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ NULL,		NULL,		0,		0},
-};
-
-static int __init tegra_trimslice_pci_init(void)
-{
-	if (!machine_is_trimslice())
-		return 0;
-
-	return tegra_pcie_init(true, true);
-}
-subsys_initcall(tegra_trimslice_pci_init);
-
-static void __init tegra_trimslice_init(void)
-{
-	tegra_clk_init_from_table(trimslice_clk_init_table);
-
-	trimslice_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
-
-	trimslice_i2c_init();
-	trimslice_usb_init();
-}
-
-MACHINE_START(TRIMSLICE, "trimslice")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_trimslice_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_trimslice_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
deleted file mode 100644
index 50f128d87779..000000000000
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice.h
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
-#define _MACH_TEGRA_BOARD_TRIMSLICE_H
-
-#include <mach/gpio-tegra.h>
-
-#define TRIMSLICE_GPIO_SD4_CD	TEGRA_GPIO_PP1	/* mmc4 cd */
-#define TRIMSLICE_GPIO_SD4_WP	TEGRA_GPIO_PP2	/* mmc4 wp */
-
-#define TRIMSLICE_GPIO_USB1_MODE	TEGRA_GPIO_PV2 /* USB1 mode */
-#define TRIMSLICE_GPIO_USB2_RST		TEGRA_GPIO_PV0 /* USB2 PHY reset */
-
-void trimslice_pinmux_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 58f981c0819c..fd82085eca5d 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -1,6 +1,7 @@
 /*
  *
  * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012 NVIDIA CORPORATION.  All rights reserved.
  *
  * Author:
  *	Colin Cross <ccross@google.com>
@@ -19,8 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -32,325 +31,75 @@
 
 #include "board.h"
 #include "clock.h"
+#include "tegra_cpu_car.h"
+
+/* Global data of Tegra CPU CAR ops */
+struct tegra_cpu_car_ops *tegra_cpu_car_ops;
 
 /*
  * Locking:
  *
- * Each struct clk has a spinlock.
- *
- * To avoid AB-BA locking problems, locks must always be traversed from child
- * clock to parent clock.  For example, when enabling a clock, the clock's lock
- * is taken, and then clk_enable is called on the parent, which take's the
- * parent clock's lock.  There is one exceptions to this ordering: When dumping
- * the clock tree through debugfs.  In this case, clk_lock_all is called,
- * which attemps to iterate through the entire list of clocks and take every
- * clock lock.  If any call to spin_trylock fails, all locked clocks are
- * unlocked, and the process is retried.  When all the locks are held,
- * the only clock operation that can be called is clk_get_rate_all_locked.
- *
- * Within a single clock, no clock operation can call another clock operation
- * on itself, except for clk_get_rate_locked and clk_set_rate_locked.  Any
- * clock operation can call any other clock operation on any of it's possible
- * parents.
- *
  * An additional mutex, clock_list_lock, is used to protect the list of all
  * clocks.
  *
- * The clock operations must lock internally to protect against
- * read-modify-write on registers that are shared by multiple clocks
  */
 static DEFINE_MUTEX(clock_list_lock);
 static LIST_HEAD(clocks);
 
-struct clk *tegra_get_clock_by_name(const char *name)
-{
-	struct clk *c;
-	struct clk *ret = NULL;
-	mutex_lock(&clock_list_lock);
-	list_for_each_entry(c, &clocks, node) {
-		if (strcmp(c->name, name) == 0) {
-			ret = c;
-			break;
-		}
-	}
-	mutex_unlock(&clock_list_lock);
-	return ret;
-}
-
-/* Must be called with c->spinlock held */
-static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p)
-{
-	u64 rate;
-
-	rate = clk_get_rate(p);
-
-	if (c->mul != 0 && c->div != 0) {
-		rate *= c->mul;
-		rate += c->div - 1; /* round up */
-		do_div(rate, c->div);
-	}
-
-	return rate;
-}
-
-/* Must be called with c->spinlock held */
-unsigned long clk_get_rate_locked(struct clk *c)
-{
-	unsigned long rate;
-
-	if (c->parent)
-		rate = clk_predict_rate_from_parent(c, c->parent);
-	else
-		rate = c->rate;
-
-	return rate;
-}
-
-unsigned long clk_get_rate(struct clk *c)
+void tegra_clk_add(struct clk *clk)
 {
-	unsigned long flags;
-	unsigned long rate;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	rate = clk_get_rate_locked(c);
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_reparent(struct clk *c, struct clk *parent)
-{
-	c->parent = parent;
-	return 0;
-}
-
-void clk_init(struct clk *c)
-{
-	spin_lock_init(&c->spinlock);
-
-	if (c->ops && c->ops->init)
-		c->ops->init(c);
-
-	if (!c->ops || !c->ops->enable) {
-		c->refcnt++;
-		c->set = true;
-		if (c->parent)
-			c->state = c->parent->state;
-		else
-			c->state = ON;
-	}
+	struct clk_tegra *c = to_clk_tegra(__clk_get_hw(clk));
 
 	mutex_lock(&clock_list_lock);
 	list_add(&c->node, &clocks);
 	mutex_unlock(&clock_list_lock);
 }
 
-int clk_enable(struct clk *c)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (c->refcnt == 0) {
-		if (c->parent) {
-			ret = clk_enable(c->parent);
-			if (ret)
-				goto out;
-		}
-
-		if (c->ops && c->ops->enable) {
-			ret = c->ops->enable(c);
-			if (ret) {
-				if (c->parent)
-					clk_disable(c->parent);
-				goto out;
-			}
-			c->state = ON;
-			c->set = true;
-		}
-	}
-	c->refcnt++;
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *c)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (c->refcnt == 0) {
-		WARN(1, "Attempting to disable clock %s with refcnt 0", c->name);
-		spin_unlock_irqrestore(&c->spinlock, flags);
-		return;
-	}
-	if (c->refcnt == 1) {
-		if (c->ops && c->ops->disable)
-			c->ops->disable(c);
-
-		if (c->parent)
-			clk_disable(c->parent);
-
-		c->state = OFF;
-	}
-	c->refcnt--;
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_set_parent(struct clk *c, struct clk *parent)
-{
-	int ret;
-	unsigned long flags;
-	unsigned long new_rate;
-	unsigned long old_rate;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (!c->ops || !c->ops->set_parent) {
-		ret = -ENOSYS;
-		goto out;
-	}
-
-	new_rate = clk_predict_rate_from_parent(c, parent);
-	old_rate = clk_get_rate_locked(c);
-
-	ret = c->ops->set_parent(c, parent);
-	if (ret)
-		goto out;
-
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *c)
-{
-	return c->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_rate_locked(struct clk *c, unsigned long rate)
-{
-	long new_rate;
-
-	if (!c->ops || !c->ops->set_rate)
-		return -ENOSYS;
-
-	if (rate > c->max_rate)
-		rate = c->max_rate;
-
-	if (c->ops && c->ops->round_rate) {
-		new_rate = c->ops->round_rate(c, rate);
-
-		if (new_rate < 0)
-			return new_rate;
-
-		rate = new_rate;
-	}
-
-	return c->ops->set_rate(c, rate);
-}
-
-int clk_set_rate(struct clk *c, unsigned long rate)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	ret = clk_set_rate_locked(c, rate);
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-
-/* Must be called with clocks lock and all indvidual clock locks held */
-unsigned long clk_get_rate_all_locked(struct clk *c)
+struct clk *tegra_get_clock_by_name(const char *name)
 {
-	u64 rate;
-	int mul = 1;
-	int div = 1;
-	struct clk *p = c;
-
-	while (p) {
-		c = p;
-		if (c->mul != 0 && c->div != 0) {
-			mul *= c->mul;
-			div *= c->div;
+	struct clk_tegra *c;
+	struct clk *ret = NULL;
+	mutex_lock(&clock_list_lock);
+	list_for_each_entry(c, &clocks, node) {
+		if (strcmp(__clk_get_name(c->hw.clk), name) == 0) {
+			ret = c->hw.clk;
+			break;
 		}
-		p = c->parent;
-	}
-
-	rate = c->rate;
-	rate *= mul;
-	do_div(rate, div);
-
-	return rate;
-}
-
-long clk_round_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long flags;
-	long ret;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (!c->ops || !c->ops->round_rate) {
-		ret = -ENOSYS;
-		goto out;
 	}
-
-	if (rate > c->max_rate)
-		rate = c->max_rate;
-
-	ret = c->ops->round_rate(c, rate);
-
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
+	mutex_unlock(&clock_list_lock);
 	return ret;
 }
-EXPORT_SYMBOL(clk_round_rate);
 
 static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table)
 {
 	struct clk *c;
 	struct clk *p;
+	struct clk *parent;
 
 	int ret = 0;
 
 	c = tegra_get_clock_by_name(table->name);
 
 	if (!c) {
-		pr_warning("Unable to initialize clock %s\n",
+		pr_warn("Unable to initialize clock %s\n",
 			table->name);
 		return -ENODEV;
 	}
 
+	parent = clk_get_parent(c);
+
 	if (table->parent) {
 		p = tegra_get_clock_by_name(table->parent);
 		if (!p) {
-			pr_warning("Unable to find parent %s of clock %s\n",
+			pr_warn("Unable to find parent %s of clock %s\n",
 				table->parent, table->name);
 			return -ENODEV;
 		}
 
-		if (c->parent != p) {
+		if (parent != p) {
 			ret = clk_set_parent(c, p);
 			if (ret) {
-				pr_warning("Unable to set parent %s of clock %s: %d\n",
+				pr_warn("Unable to set parent %s of clock %s: %d\n",
 					table->parent, table->name, ret);
 				return -EINVAL;
 			}
@@ -360,16 +109,16 @@ static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table)
 	if (table->rate && table->rate != clk_get_rate(c)) {
 		ret = clk_set_rate(c, table->rate);
 		if (ret) {
-			pr_warning("Unable to set clock %s to rate %lu: %d\n",
+			pr_warn("Unable to set clock %s to rate %lu: %d\n",
 				table->name, table->rate, ret);
 			return -EINVAL;
 		}
 	}
 
 	if (table->enabled) {
-		ret = clk_enable(c);
+		ret = clk_prepare_enable(c);
 		if (ret) {
-			pr_warning("Unable to enable clock %s: %d\n",
+			pr_warn("Unable to enable clock %s: %d\n",
 				table->name, ret);
 			return -EINVAL;
 		}
@@ -383,19 +132,20 @@ void tegra_clk_init_from_table(struct tegra_clk_init_table *table)
 	for (; table->name; table++)
 		tegra_clk_init_one_from_table(table);
 }
-EXPORT_SYMBOL(tegra_clk_init_from_table);
 
 void tegra_periph_reset_deassert(struct clk *c)
 {
-	BUG_ON(!c->ops->reset);
-	c->ops->reset(c, false);
+	struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c));
+	BUG_ON(!clk->reset);
+	clk->reset(__clk_get_hw(c), false);
 }
 EXPORT_SYMBOL(tegra_periph_reset_deassert);
 
 void tegra_periph_reset_assert(struct clk *c)
 {
-	BUG_ON(!c->ops->reset);
-	c->ops->reset(c, true);
+	struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c));
+	BUG_ON(!clk->reset);
+	clk->reset(__clk_get_hw(c), true);
 }
 EXPORT_SYMBOL(tegra_periph_reset_assert);
 
@@ -405,268 +155,14 @@ EXPORT_SYMBOL(tegra_periph_reset_assert);
 int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
 {
 	int ret = 0;
-	unsigned long flags;
+	struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c));
 
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (!c->ops || !c->ops->clk_cfg_ex) {
+	if (!clk->clk_cfg_ex) {
 		ret = -ENOSYS;
 		goto out;
 	}
-	ret = c->ops->clk_cfg_ex(c, p, setting);
+	ret = clk->clk_cfg_ex(__clk_get_hw(c), p, setting);
 
 out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-
 	return ret;
 }
-
-#ifdef CONFIG_DEBUG_FS
-
-static int __clk_lock_all_spinlocks(void)
-{
-	struct clk *c;
-
-	list_for_each_entry(c, &clocks, node)
-		if (!spin_trylock(&c->spinlock))
-			goto unlock_spinlocks;
-
-	return 0;
-
-unlock_spinlocks:
-	list_for_each_entry_continue_reverse(c, &clocks, node)
-		spin_unlock(&c->spinlock);
-
-	return -EAGAIN;
-}
-
-static void __clk_unlock_all_spinlocks(void)
-{
-	struct clk *c;
-
-	list_for_each_entry_reverse(c, &clocks, node)
-		spin_unlock(&c->spinlock);
-}
-
-/*
- * This function retries until it can take all locks, and may take
- * an arbitrarily long time to complete.
- * Must be called with irqs enabled, returns with irqs disabled
- * Must be called with clock_list_lock held
- */
-static void clk_lock_all(void)
-{
-	int ret;
-retry:
-	local_irq_disable();
-
-	ret = __clk_lock_all_spinlocks();
-	if (ret)
-		goto failed_spinlocks;
-
-	/* All locks taken successfully, return */
-	return;
-
-failed_spinlocks:
-	local_irq_enable();
-	yield();
-	goto retry;
-}
-
-/*
- * Unlocks all clocks after a clk_lock_all
- * Must be called with irqs disabled, returns with irqs enabled
- * Must be called with clock_list_lock held
- */
-static void clk_unlock_all(void)
-{
-	__clk_unlock_all_spinlocks();
-
-	local_irq_enable();
-}
-
-static struct dentry *clk_debugfs_root;
-
-
-static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level)
-{
-	struct clk *child;
-	const char *state = "uninit";
-	char div[8] = {0};
-
-	if (c->state == ON)
-		state = "on";
-	else if (c->state == OFF)
-		state = "off";
-
-	if (c->mul != 0 && c->div != 0) {
-		if (c->mul > c->div) {
-			int mul = c->mul / c->div;
-			int mul2 = (c->mul * 10 / c->div) % 10;
-			int mul3 = (c->mul * 10) % c->div;
-			if (mul2 == 0 && mul3 == 0)
-				snprintf(div, sizeof(div), "x%d", mul);
-			else if (mul3 == 0)
-				snprintf(div, sizeof(div), "x%d.%d", mul, mul2);
-			else
-				snprintf(div, sizeof(div), "x%d.%d..", mul, mul2);
-		} else {
-			snprintf(div, sizeof(div), "%d%s", c->div / c->mul,
-				(c->div % c->mul) ? ".5" : "");
-		}
-	}
-
-	seq_printf(s, "%*s%c%c%-*s %-6s %-3d %-8s %-10lu\n",
-		level * 3 + 1, "",
-		c->rate > c->max_rate ? '!' : ' ',
-		!c->set ? '*' : ' ',
-		30 - level * 3, c->name,
-		state, c->refcnt, div, clk_get_rate_all_locked(c));
-
-	list_for_each_entry(child, &clocks, node) {
-		if (child->parent != c)
-			continue;
-
-		clock_tree_show_one(s, child, level + 1);
-	}
-}
-
-static int clock_tree_show(struct seq_file *s, void *data)
-{
-	struct clk *c;
-	seq_printf(s, "   clock                          state  ref div      rate\n");
-	seq_printf(s, "--------------------------------------------------------------\n");
-
-	mutex_lock(&clock_list_lock);
-
-	clk_lock_all();
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->parent == NULL)
-			clock_tree_show_one(s, c, 0);
-
-	clk_unlock_all();
-
-	mutex_unlock(&clock_list_lock);
-	return 0;
-}
-
-static int clock_tree_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, clock_tree_show, inode->i_private);
-}
-
-static const struct file_operations clock_tree_fops = {
-	.open		= clock_tree_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int possible_parents_show(struct seq_file *s, void *data)
-{
-	struct clk *c = s->private;
-	int i;
-
-	for (i = 0; c->inputs[i].input; i++) {
-		char *first = (i == 0) ? "" : " ";
-		seq_printf(s, "%s%s", first, c->inputs[i].input->name);
-	}
-	seq_printf(s, "\n");
-	return 0;
-}
-
-static int possible_parents_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, possible_parents_show, inode->i_private);
-}
-
-static const struct file_operations possible_parents_fops = {
-	.open		= possible_parents_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	struct dentry *d;
-
-	d = debugfs_create_dir(c->name, clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u8("refcnt", S_IRUGO, c->dent, (u8 *)&c->refcnt);
-	if (!d)
-		goto err_out;
-
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d)
-		goto err_out;
-
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d)
-		goto err_out;
-
-	if (c->inputs) {
-		d = debugfs_create_file("possible_parents", S_IRUGO, c->dent,
-			c, &possible_parents_fops);
-		if (!d)
-			goto err_out;
-	}
-
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return -ENOMEM;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-int __init tegra_clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err = -ENOMEM;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL,
-		&clock_tree_fops);
-	if (!d)
-		goto err_out;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index bc300657deba..2aa37f5c44c0 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -2,6 +2,7 @@
  * arch/arm/mach-tegra/include/mach/clock.h
  *
  * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012 NVIDIA CORPORATION.  All rights reserved.
  *
  * Author:
  *	Colin Cross <ccross@google.com>
@@ -20,9 +21,9 @@
 #ifndef __MACH_TEGRA_CLOCK_H
 #define __MACH_TEGRA_CLOCK_H
 
+#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/list.h>
-#include <linux/spinlock.h>
 
 #include <mach/clk.h>
 
@@ -52,7 +53,8 @@
 #define ENABLE_ON_INIT		(1 << 28)
 #define PERIPH_ON_APB           (1 << 29)
 
-struct clk;
+struct clk_tegra;
+#define to_clk_tegra(_hw) container_of(_hw, struct clk_tegra, hw)
 
 struct clk_mux_sel {
 	struct clk	*input;
@@ -68,47 +70,29 @@ struct clk_pll_freq_table {
 	u8		cpcon;
 };
 
-struct clk_ops {
-	void		(*init)(struct clk *);
-	int		(*enable)(struct clk *);
-	void		(*disable)(struct clk *);
-	int		(*set_parent)(struct clk *, struct clk *);
-	int		(*set_rate)(struct clk *, unsigned long);
-	long		(*round_rate)(struct clk *, unsigned long);
-	void		(*reset)(struct clk *, bool);
-	int		(*clk_cfg_ex)(struct clk *,
-				enum tegra_clk_ex_param, u32);
-};
-
 enum clk_state {
 	UNINITIALIZED = 0,
 	ON,
 	OFF,
 };
 
-struct clk {
+struct clk_tegra {
 	/* node for master clocks list */
-	struct list_head	node;		/* node for list of all clocks */
+	struct list_head	node;	/* node for list of all clocks */
 	struct clk_lookup	lookup;
+	struct clk_hw		hw;
 
-#ifdef CONFIG_DEBUG_FS
-	struct dentry		*dent;
-#endif
 	bool			set;
-	struct clk_ops		*ops;
-	unsigned long		rate;
+	unsigned long		fixed_rate;
 	unsigned long		max_rate;
 	unsigned long		min_rate;
 	u32			flags;
 	const char		*name;
 
-	u32			refcnt;
 	enum clk_state		state;
-	struct clk		*parent;
 	u32			div;
 	u32			mul;
 
-	const struct clk_mux_sel	*inputs;
 	u32				reg;
 	u32				reg_shift;
 
@@ -144,7 +128,8 @@ struct clk {
 		} shared_bus_user;
 	} u;
 
-	spinlock_t spinlock;
+	void (*reset)(struct clk_hw *, bool);
+	int (*clk_cfg_ex)(struct clk_hw *, enum tegra_clk_ex_param, u32);
 };
 
 struct clk_duplicate {
@@ -159,13 +144,10 @@ struct tegra_clk_init_table {
 	bool enabled;
 };
 
+void tegra_clk_add(struct clk *c);
 void tegra2_init_clocks(void);
 void tegra30_init_clocks(void);
-void clk_init(struct clk *clk);
 struct clk *tegra_get_clock_by_name(const char *name);
-int clk_reparent(struct clk *c, struct clk *parent);
 void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
-unsigned long clk_get_rate_locked(struct clk *c);
-int clk_set_rate_locked(struct clk *c, unsigned long rate);
 
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 96fef6bcc651..0b0a5f556d34 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -31,9 +31,11 @@
 
 #include "board.h"
 #include "clock.h"
+#include "common.h"
 #include "fuse.h"
 #include "pmc.h"
 #include "apbio.h"
+#include "sleep.h"
 
 /*
  * Storage for debug-macro.S's state.
@@ -135,6 +137,7 @@ void __init tegra20_init_early(void)
 	tegra_init_cache(0x331, 0x441);
 	tegra_pmc_init();
 	tegra_powergate_init();
+	tegra20_hotplug_init();
 }
 #endif
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
@@ -147,11 +150,11 @@ void __init tegra30_init_early(void)
 	tegra_init_cache(0x441, 0x551);
 	tegra_pmc_init();
 	tegra_powergate_init();
+	tegra30_hotplug_init();
 }
 #endif
 
 void __init tegra_init_late(void)
 {
-	tegra_clk_debugfs_init();
 	tegra_powergate_debugfs_init();
 }
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
new file mode 100644
index 000000000000..02f71b4f1e51
--- /dev/null
+++ b/arch/arm/mach-tegra/common.h
@@ -0,0 +1,4 @@
+extern struct smp_operations tegra_smp_ops;
+
+extern void tegra_cpu_die(unsigned int cpu);
+extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index ceb52db1e2f1..627bf0f4262e 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -49,6 +49,8 @@ static struct cpufreq_frequency_table freq_table[] = {
 #define NUM_CPUS	2
 
 static struct clk *cpu_clk;
+static struct clk *pll_x_clk;
+static struct clk *pll_p_clk;
 static struct clk *emc_clk;
 
 static unsigned long target_cpu_speed[NUM_CPUS];
@@ -71,6 +73,42 @@ static unsigned int tegra_getspeed(unsigned int cpu)
 	return rate;
 }
 
+static int tegra_cpu_clk_set_rate(unsigned long rate)
+{
+	int ret;
+
+	/*
+	 * Take an extra reference to the main pll so it doesn't turn
+	 * off when we move the cpu off of it
+	 */
+	clk_prepare_enable(pll_x_clk);
+
+	ret = clk_set_parent(cpu_clk, pll_p_clk);
+	if (ret) {
+		pr_err("Failed to switch cpu to clock pll_p\n");
+		goto out;
+	}
+
+	if (rate == clk_get_rate(pll_p_clk))
+		goto out;
+
+	ret = clk_set_rate(pll_x_clk, rate);
+	if (ret) {
+		pr_err("Failed to change pll_x to %lu\n", rate);
+		goto out;
+	}
+
+	ret = clk_set_parent(cpu_clk, pll_x_clk);
+	if (ret) {
+		pr_err("Failed to switch cpu to clock pll_x\n");
+		goto out;
+	}
+
+out:
+	clk_disable_unprepare(pll_x_clk);
+	return ret;
+}
+
 static int tegra_update_cpu_speed(unsigned long rate)
 {
 	int ret = 0;
@@ -101,7 +139,7 @@ static int tegra_update_cpu_speed(unsigned long rate)
 	       freqs.old, freqs.new);
 #endif
 
-	ret = clk_set_rate(cpu_clk, freqs.new * 1000);
+	ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
 	if (ret) {
 		pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
 			freqs.new);
@@ -183,6 +221,14 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
 
+	pll_x_clk = clk_get_sys(NULL, "pll_x");
+	if (IS_ERR(pll_x_clk))
+		return PTR_ERR(pll_x_clk);
+
+	pll_p_clk = clk_get_sys(NULL, "pll_p");
+	if (IS_ERR(pll_p_clk))
+		return PTR_ERR(pll_p_clk);
+
 	emc_clk = clk_get_sys("cpu", "emc");
 	if (IS_ERR(emc_clk)) {
 		clk_put(cpu_clk);
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
deleted file mode 100644
index c70e65ffa36b..000000000000
--- a/arch/arm/mach-tegra/devices.c
+++ /dev/null
@@ -1,702 +0,0 @@
-/*
- * Copyright (C) 2010,2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *	Erik Gilling <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c-tegra.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-#include <mach/iomap.h>
-#include <mach/dma.h>
-#include <mach/usb_phy.h>
-
-#include "gpio-names.h"
-#include "devices.h"
-
-static struct resource gpio_resource[] = {
-	[0] = {
-		.start	= TEGRA_GPIO_BASE,
-		.end	= TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_GPIO1,
-		.end	= INT_GPIO1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= INT_GPIO2,
-		.end	= INT_GPIO2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= INT_GPIO3,
-		.end	= INT_GPIO3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
-		.start	= INT_GPIO4,
-		.end	= INT_GPIO4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
-		.start	= INT_GPIO5,
-		.end	= INT_GPIO5,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
-		.start	= INT_GPIO6,
-		.end	= INT_GPIO6,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
-		.start	= INT_GPIO7,
-		.end	= INT_GPIO7,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tegra_gpio_device = {
-	.name		= "tegra-gpio",
-	.id		= -1,
-	.resource	= gpio_resource,
-	.num_resources	= ARRAY_SIZE(gpio_resource),
-};
-
-static struct resource pinmux_resource[] = {
-	[0] = {
-		/* Tri-state registers */
-		.start	= TEGRA_APB_MISC_BASE + 0x14,
-		.end	= TEGRA_APB_MISC_BASE + 0x20 + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* Mux registers */
-		.start	= TEGRA_APB_MISC_BASE + 0x80,
-		.end	= TEGRA_APB_MISC_BASE + 0x9c + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		/* Pull-up/down registers */
-		.start	= TEGRA_APB_MISC_BASE + 0xa0,
-		.end	= TEGRA_APB_MISC_BASE + 0xb0 + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		/* Pad control registers */
-		.start	= TEGRA_APB_MISC_BASE + 0x868,
-		.end	= TEGRA_APB_MISC_BASE + 0x90c + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tegra_pinmux_device = {
-	.name		= "tegra20-pinctrl",
-	.id		= -1,
-	.resource	= pinmux_resource,
-	.num_resources	= ARRAY_SIZE(pinmux_resource),
-};
-
-static struct resource i2c_resource1[] = {
-	[0] = {
-		.start	= INT_I2C,
-		.end	= INT_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_I2C_BASE,
-		.end	= TEGRA_I2C_BASE + TEGRA_I2C_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c_resource2[] = {
-	[0] = {
-		.start	= INT_I2C2,
-		.end	= INT_I2C2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_I2C2_BASE,
-		.end	= TEGRA_I2C2_BASE + TEGRA_I2C2_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c_resource3[] = {
-	[0] = {
-		.start	= INT_I2C3,
-		.end	= INT_I2C3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_I2C3_BASE,
-		.end	= TEGRA_I2C3_BASE + TEGRA_I2C3_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c_resource4[] = {
-	[0] = {
-		.start	= INT_DVC,
-		.end	= INT_DVC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_DVC_BASE,
-		.end	= TEGRA_DVC_BASE + TEGRA_DVC_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct tegra_i2c_platform_data tegra_i2c1_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data tegra_i2c2_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data tegra_i2c3_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data tegra_dvc_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-struct platform_device tegra_i2c_device1 = {
-	.name		= "tegra-i2c",
-	.id		= 0,
-	.resource	= i2c_resource1,
-	.num_resources	= ARRAY_SIZE(i2c_resource1),
-	.dev = {
-		.platform_data = &tegra_i2c1_platform_data,
-	},
-};
-
-struct platform_device tegra_i2c_device2 = {
-	.name		= "tegra-i2c",
-	.id		= 1,
-	.resource	= i2c_resource2,
-	.num_resources	= ARRAY_SIZE(i2c_resource2),
-	.dev = {
-		.platform_data = &tegra_i2c2_platform_data,
-	},
-};
-
-struct platform_device tegra_i2c_device3 = {
-	.name		= "tegra-i2c",
-	.id		= 2,
-	.resource	= i2c_resource3,
-	.num_resources	= ARRAY_SIZE(i2c_resource3),
-	.dev = {
-		.platform_data = &tegra_i2c3_platform_data,
-	},
-};
-
-struct platform_device tegra_i2c_device4 = {
-	.name		= "tegra-i2c",
-	.id		= 3,
-	.resource	= i2c_resource4,
-	.num_resources	= ARRAY_SIZE(i2c_resource4),
-	.dev = {
-		.platform_data = &tegra_dvc_platform_data,
-	},
-};
-
-static struct resource spi_resource1[] = {
-	[0] = {
-		.start	= INT_S_LINK1,
-		.end	= INT_S_LINK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI1_BASE,
-		.end	= TEGRA_SPI1_BASE + TEGRA_SPI1_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource spi_resource2[] = {
-	[0] = {
-		.start	= INT_SPI_2,
-		.end	= INT_SPI_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI2_BASE,
-		.end	= TEGRA_SPI2_BASE + TEGRA_SPI2_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource spi_resource3[] = {
-	[0] = {
-		.start	= INT_SPI_3,
-		.end	= INT_SPI_3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI3_BASE,
-		.end	= TEGRA_SPI3_BASE + TEGRA_SPI3_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource spi_resource4[] = {
-	[0] = {
-		.start	= INT_SPI_4,
-		.end	= INT_SPI_4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI4_BASE,
-		.end	= TEGRA_SPI4_BASE + TEGRA_SPI4_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tegra_spi_device1 = {
-	.name		= "spi_tegra",
-	.id		= 0,
-	.resource	= spi_resource1,
-	.num_resources	= ARRAY_SIZE(spi_resource1),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device tegra_spi_device2 = {
-	.name		= "spi_tegra",
-	.id		= 1,
-	.resource	= spi_resource2,
-	.num_resources	= ARRAY_SIZE(spi_resource2),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device tegra_spi_device3 = {
-	.name		= "spi_tegra",
-	.id		= 2,
-	.resource	= spi_resource3,
-	.num_resources	= ARRAY_SIZE(spi_resource3),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device tegra_spi_device4 = {
-	.name		= "spi_tegra",
-	.id		= 3,
-	.resource	= spi_resource4,
-	.num_resources	= ARRAY_SIZE(spi_resource4),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-
-static struct resource sdhci_resource1[] = {
-	[0] = {
-		.start	= INT_SDMMC1,
-		.end	= INT_SDMMC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC1_BASE,
-		.end	= TEGRA_SDMMC1_BASE + TEGRA_SDMMC1_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource sdhci_resource2[] = {
-	[0] = {
-		.start	= INT_SDMMC2,
-		.end	= INT_SDMMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC2_BASE,
-		.end	= TEGRA_SDMMC2_BASE + TEGRA_SDMMC2_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource sdhci_resource3[] = {
-	[0] = {
-		.start	= INT_SDMMC3,
-		.end	= INT_SDMMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC3_BASE,
-		.end	= TEGRA_SDMMC3_BASE + TEGRA_SDMMC3_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource sdhci_resource4[] = {
-	[0] = {
-		.start	= INT_SDMMC4,
-		.end	= INT_SDMMC4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC4_BASE,
-		.end	= TEGRA_SDMMC4_BASE + TEGRA_SDMMC4_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* board files should fill in platform_data register the devices themselvs.
- * See board-harmony.c for an example
- */
-struct platform_device tegra_sdhci_device1 = {
-	.name		= "sdhci-tegra",
-	.id		= 0,
-	.resource	= sdhci_resource1,
-	.num_resources	= ARRAY_SIZE(sdhci_resource1),
-};
-
-struct platform_device tegra_sdhci_device2 = {
-	.name		= "sdhci-tegra",
-	.id		= 1,
-	.resource	= sdhci_resource2,
-	.num_resources	= ARRAY_SIZE(sdhci_resource2),
-};
-
-struct platform_device tegra_sdhci_device3 = {
-	.name		= "sdhci-tegra",
-	.id		= 2,
-	.resource	= sdhci_resource3,
-	.num_resources	= ARRAY_SIZE(sdhci_resource3),
-};
-
-struct platform_device tegra_sdhci_device4 = {
-	.name		= "sdhci-tegra",
-	.id		= 3,
-	.resource	= sdhci_resource4,
-	.num_resources	= ARRAY_SIZE(sdhci_resource4),
-};
-
-static struct resource tegra_usb1_resources[] = {
-	[0] = {
-		.start	= TEGRA_USB_BASE,
-		.end	= TEGRA_USB_BASE + TEGRA_USB_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_USB,
-		.end	= INT_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_usb2_resources[] = {
-	[0] = {
-		.start	= TEGRA_USB2_BASE,
-		.end	= TEGRA_USB2_BASE + TEGRA_USB2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_USB2,
-		.end	= INT_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_usb3_resources[] = {
-	[0] = {
-		.start	= TEGRA_USB3_BASE,
-		.end	= TEGRA_USB3_BASE + TEGRA_USB3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_USB3,
-		.end	= INT_USB3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
-	.reset_gpio = -1,
-	.clk = "cdev2",
-};
-
-struct tegra_ehci_platform_data tegra_ehci1_pdata = {
-	.operating_mode = TEGRA_USB_OTG,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
-
-struct tegra_ehci_platform_data tegra_ehci2_pdata = {
-	.phy_config = &tegra_ehci2_ulpi_phy_config,
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
-
-struct tegra_ehci_platform_data tegra_ehci3_pdata = {
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
-
-static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device tegra_ehci1_device = {
-	.name	= "tegra-ehci",
-	.id	= 0,
-	.dev	= {
-		.dma_mask	= &tegra_ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tegra_ehci1_pdata,
-	},
-	.resource = tegra_usb1_resources,
-	.num_resources = ARRAY_SIZE(tegra_usb1_resources),
-};
-
-struct platform_device tegra_ehci2_device = {
-	.name	= "tegra-ehci",
-	.id	= 1,
-	.dev	= {
-		.dma_mask	= &tegra_ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tegra_ehci2_pdata,
-	},
-	.resource = tegra_usb2_resources,
-	.num_resources = ARRAY_SIZE(tegra_usb2_resources),
-};
-
-struct platform_device tegra_ehci3_device = {
-	.name	= "tegra-ehci",
-	.id	= 2,
-	.dev	= {
-		.dma_mask	= &tegra_ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tegra_ehci3_pdata,
-	},
-	.resource = tegra_usb3_resources,
-	.num_resources = ARRAY_SIZE(tegra_usb3_resources),
-};
-
-static struct resource tegra_pmu_resources[] = {
-	[0] = {
-		.start	= INT_CPU0_PMU_INTR,
-		.end	= INT_CPU0_PMU_INTR,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= INT_CPU1_PMU_INTR,
-		.end	= INT_CPU1_PMU_INTR,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tegra_pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= ARRAY_SIZE(tegra_pmu_resources),
-	.resource	= tegra_pmu_resources,
-};
-
-static struct resource tegra_uarta_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTA_BASE,
-		.end	= TEGRA_UARTA_BASE + TEGRA_UARTA_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTA,
-		.end	= INT_UARTA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uartb_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTB_BASE,
-		.end	= TEGRA_UARTB_BASE + TEGRA_UARTB_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTB,
-		.end	= INT_UARTB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uartc_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTC_BASE,
-		.end	= TEGRA_UARTC_BASE + TEGRA_UARTC_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTC,
-		.end	= INT_UARTC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uartd_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTD_BASE,
-		.end	= TEGRA_UARTD_BASE + TEGRA_UARTD_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTD,
-		.end	= INT_UARTD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uarte_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTE_BASE,
-		.end	= TEGRA_UARTE_BASE + TEGRA_UARTE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTE,
-		.end	= INT_UARTE,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tegra_uarta_device = {
-	.name	= "tegra_uart",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(tegra_uarta_resources),
-	.resource	= tegra_uarta_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uartb_device = {
-	.name	= "tegra_uart",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(tegra_uartb_resources),
-	.resource	= tegra_uartb_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uartc_device = {
-	.name	= "tegra_uart",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(tegra_uartc_resources),
-	.resource	= tegra_uartc_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uartd_device = {
-	.name	= "tegra_uart",
-	.id	= 3,
-	.num_resources	= ARRAY_SIZE(tegra_uartd_resources),
-	.resource	= tegra_uartd_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uarte_device = {
-	.name	= "tegra_uart",
-	.id	= 4,
-	.num_resources	= ARRAY_SIZE(tegra_uarte_resources),
-	.resource	= tegra_uarte_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource i2s_resource1[] = {
-	[0] = {
-		.start	= INT_I2S1,
-		.end	= INT_I2S1,
-		.flags	= IORESOURCE_IRQ
-	},
-	[1] = {
-		.start	= TEGRA_DMA_REQ_SEL_I2S_1,
-		.end	= TEGRA_DMA_REQ_SEL_I2S_1,
-		.flags	= IORESOURCE_DMA
-	},
-	[2] = {
-		.start	= TEGRA_I2S1_BASE,
-		.end	= TEGRA_I2S1_BASE + TEGRA_I2S1_SIZE - 1,
-		.flags	= IORESOURCE_MEM
-	}
-};
-
-static struct resource i2s_resource2[] = {
-	[0] = {
-		.start	= INT_I2S2,
-		.end	= INT_I2S2,
-		.flags	= IORESOURCE_IRQ
-	},
-	[1] = {
-		.start	= TEGRA_DMA_REQ_SEL_I2S2_1,
-		.end	= TEGRA_DMA_REQ_SEL_I2S2_1,
-		.flags	= IORESOURCE_DMA
-	},
-	[2] = {
-		.start	= TEGRA_I2S2_BASE,
-		.end	= TEGRA_I2S2_BASE + TEGRA_I2S2_SIZE - 1,
-		.flags	= IORESOURCE_MEM
-	}
-};
-
-struct platform_device tegra_i2s_device1 = {
-	.name		= "tegra20-i2s",
-	.id		= 0,
-	.resource	= i2s_resource1,
-	.num_resources	= ARRAY_SIZE(i2s_resource1),
-};
-
-struct platform_device tegra_i2s_device2 = {
-	.name		= "tegra20-i2s",
-	.id		= 1,
-	.resource	= i2s_resource2,
-	.num_resources	= ARRAY_SIZE(i2s_resource2),
-};
-
-static struct resource tegra_das_resources[] = {
-	[0] = {
-		.start = TEGRA_APB_MISC_DAS_BASE,
-		.end = TEGRA_APB_MISC_DAS_BASE + TEGRA_APB_MISC_DAS_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tegra_das_device = {
-	.name		= "tegra20-das",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(tegra_das_resources),
-	.resource	= tegra_das_resources,
-};
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
deleted file mode 100644
index 4f5052726495..000000000000
--- a/arch/arm/mach-tegra/devices.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2010,2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *	Erik Gilling <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_DEVICES_H
-#define __MACH_TEGRA_DEVICES_H
-
-#include <linux/platform_device.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <mach/usb_phy.h>
-
-extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;
-
-extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
-extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
-extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
-
-extern struct platform_device tegra_gpio_device;
-extern struct platform_device tegra_pinmux_device;
-extern struct platform_device tegra_sdhci_device1;
-extern struct platform_device tegra_sdhci_device2;
-extern struct platform_device tegra_sdhci_device3;
-extern struct platform_device tegra_sdhci_device4;
-extern struct platform_device tegra_i2c_device1;
-extern struct platform_device tegra_i2c_device2;
-extern struct platform_device tegra_i2c_device3;
-extern struct platform_device tegra_i2c_device4;
-extern struct platform_device tegra_spi_device1;
-extern struct platform_device tegra_spi_device2;
-extern struct platform_device tegra_spi_device3;
-extern struct platform_device tegra_spi_device4;
-extern struct platform_device tegra_ehci1_device;
-extern struct platform_device tegra_ehci2_device;
-extern struct platform_device tegra_ehci3_device;
-extern struct platform_device tegra_uarta_device;
-extern struct platform_device tegra_uartb_device;
-extern struct platform_device tegra_uartc_device;
-extern struct platform_device tegra_uartd_device;
-extern struct platform_device tegra_uarte_device;
-extern struct platform_device tegra_pmu_device;
-extern struct platform_device tegra_i2s_device1;
-extern struct platform_device tegra_i2s_device2;
-extern struct platform_device tegra_das_device;
-
-#endif
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
deleted file mode 100644
index 29c5114d607c..000000000000
--- a/arch/arm/mach-tegra/dma.c
+++ /dev/null
@@ -1,823 +0,0 @@
-/*
- * arch/arm/mach-tegra/dma.c
- *
- * System DMA driver for NVIDIA Tegra SoCs
- *
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "apbio.h"
-
-#define APB_DMA_GEN				0x000
-#define GEN_ENABLE				(1<<31)
-
-#define APB_DMA_CNTRL				0x010
-
-#define APB_DMA_IRQ_MASK			0x01c
-
-#define APB_DMA_IRQ_MASK_SET			0x020
-
-#define APB_DMA_CHAN_CSR			0x000
-#define CSR_ENB					(1<<31)
-#define CSR_IE_EOC				(1<<30)
-#define CSR_HOLD				(1<<29)
-#define CSR_DIR					(1<<28)
-#define CSR_ONCE				(1<<27)
-#define CSR_FLOW				(1<<21)
-#define CSR_REQ_SEL_SHIFT			16
-#define CSR_WCOUNT_SHIFT			2
-#define CSR_WCOUNT_MASK				0xFFFC
-
-#define APB_DMA_CHAN_STA				0x004
-#define STA_BUSY				(1<<31)
-#define STA_ISE_EOC				(1<<30)
-#define STA_HALT				(1<<29)
-#define STA_PING_PONG				(1<<28)
-#define STA_COUNT_SHIFT				2
-#define STA_COUNT_MASK				0xFFFC
-
-#define APB_DMA_CHAN_AHB_PTR				0x010
-
-#define APB_DMA_CHAN_AHB_SEQ				0x014
-#define AHB_SEQ_INTR_ENB			(1<<31)
-#define AHB_SEQ_BUS_WIDTH_SHIFT			28
-#define AHB_SEQ_BUS_WIDTH_MASK			(0x7<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_8			(0<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_16			(1<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_32			(2<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_64			(3<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_128			(4<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_DATA_SWAP			(1<<27)
-#define AHB_SEQ_BURST_MASK			(0x7<<24)
-#define AHB_SEQ_BURST_1				(4<<24)
-#define AHB_SEQ_BURST_4				(5<<24)
-#define AHB_SEQ_BURST_8				(6<<24)
-#define AHB_SEQ_DBL_BUF				(1<<19)
-#define AHB_SEQ_WRAP_SHIFT			16
-#define AHB_SEQ_WRAP_MASK			(0x7<<AHB_SEQ_WRAP_SHIFT)
-
-#define APB_DMA_CHAN_APB_PTR				0x018
-
-#define APB_DMA_CHAN_APB_SEQ				0x01c
-#define APB_SEQ_BUS_WIDTH_SHIFT			28
-#define APB_SEQ_BUS_WIDTH_MASK			(0x7<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_8			(0<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_16			(1<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_32			(2<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_64			(3<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_128			(4<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_DATA_SWAP			(1<<27)
-#define APB_SEQ_WRAP_SHIFT			16
-#define APB_SEQ_WRAP_MASK			(0x7<<APB_SEQ_WRAP_SHIFT)
-
-#define TEGRA_SYSTEM_DMA_CH_NR			16
-#define TEGRA_SYSTEM_DMA_AVP_CH_NUM		4
-#define TEGRA_SYSTEM_DMA_CH_MIN			0
-#define TEGRA_SYSTEM_DMA_CH_MAX	\
-	(TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1)
-
-#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-
-static const unsigned int ahb_addr_wrap_table[8] = {
-	0, 32, 64, 128, 256, 512, 1024, 2048
-};
-
-static const unsigned int apb_addr_wrap_table[8] = {
-	0, 1, 2, 4, 8, 16, 32, 64
-};
-
-static const unsigned int bus_width_table[5] = {
-	8, 16, 32, 64, 128
-};
-
-#define TEGRA_DMA_NAME_SIZE 16
-struct tegra_dma_channel {
-	struct list_head	list;
-	int			id;
-	spinlock_t		lock;
-	char			name[TEGRA_DMA_NAME_SIZE];
-	void  __iomem		*addr;
-	int			mode;
-	int			irq;
-	int			req_transfer_count;
-};
-
-#define  NV_DMA_MAX_CHANNELS  32
-
-static bool tegra_dma_initialized;
-static DEFINE_MUTEX(tegra_dma_lock);
-static DEFINE_SPINLOCK(enable_lock);
-
-static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
-static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-static void tegra_dma_stop(struct tegra_dma_channel *ch);
-
-void tegra_dma_flush(struct tegra_dma_channel *ch)
-{
-}
-EXPORT_SYMBOL(tegra_dma_flush);
-
-void tegra_dma_dequeue(struct tegra_dma_channel *ch)
-{
-	struct tegra_dma_req *req;
-
-	if (tegra_dma_is_empty(ch))
-		return;
-
-	req = list_entry(ch->list.next, typeof(*req), node);
-
-	tegra_dma_dequeue_req(ch, req);
-	return;
-}
-
-static void tegra_dma_stop(struct tegra_dma_channel *ch)
-{
-	u32 csr;
-	u32 status;
-
-	csr = readl(ch->addr + APB_DMA_CHAN_CSR);
-	csr &= ~CSR_IE_EOC;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	csr &= ~CSR_ENB;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	status = readl(ch->addr + APB_DMA_CHAN_STA);
-	if (status & STA_ISE_EOC)
-		writel(status, ch->addr + APB_DMA_CHAN_STA);
-}
-
-static int tegra_dma_cancel(struct tegra_dma_channel *ch)
-{
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	while (!list_empty(&ch->list))
-		list_del(ch->list.next);
-
-	tegra_dma_stop(ch);
-
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-	return 0;
-}
-
-static unsigned int get_channel_status(struct tegra_dma_channel *ch,
-			struct tegra_dma_req *req, bool is_stop_dma)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	unsigned int status;
-
-	if (is_stop_dma) {
-		/*
-		 * STOP the DMA and get the transfer count.
-		 * Getting the transfer count is tricky.
-		 *  - Globally disable DMA on all channels
-		 *  - Read the channel's status register to know the number
-		 *    of pending bytes to be transfered.
-		 *  - Stop the dma channel
-		 *  - Globally re-enable DMA to resume other transfers
-		 */
-		spin_lock(&enable_lock);
-		writel(0, addr + APB_DMA_GEN);
-		udelay(20);
-		status = readl(ch->addr + APB_DMA_CHAN_STA);
-		tegra_dma_stop(ch);
-		writel(GEN_ENABLE, addr + APB_DMA_GEN);
-		spin_unlock(&enable_lock);
-		if (status & STA_ISE_EOC) {
-			pr_err("Got Dma Int here clearing");
-			writel(status, ch->addr + APB_DMA_CHAN_STA);
-		}
-		req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
-	} else {
-		status = readl(ch->addr + APB_DMA_CHAN_STA);
-	}
-	return status;
-}
-
-/* should be called with the channel lock held */
-static unsigned int dma_active_count(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req, unsigned int status)
-{
-	unsigned int to_transfer;
-	unsigned int req_transfer_count;
-	unsigned int bytes_transferred;
-
-	to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
-	req_transfer_count = ch->req_transfer_count + 1;
-	bytes_transferred = req_transfer_count;
-	if (status & STA_BUSY)
-		bytes_transferred -= to_transfer;
-	/*
-	 * In continuous transfer mode, DMA only tracks the count of the
-	 * half DMA buffer. So, if the DMA already finished half the DMA
-	 * then add the half buffer to the completed count.
-	 */
-	if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
-		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
-			bytes_transferred += req_transfer_count;
-		if (status & STA_ISE_EOC)
-			bytes_transferred += req_transfer_count;
-	}
-	bytes_transferred *= 4;
-	return bytes_transferred;
-}
-
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *_req)
-{
-	unsigned int status;
-	struct tegra_dma_req *req = NULL;
-	int found = 0;
-	unsigned long irq_flags;
-	int stop = 0;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-
-	if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
-		stop = 1;
-
-	list_for_each_entry(req, &ch->list, node) {
-		if (req == _req) {
-			list_del(&req->node);
-			found = 1;
-			break;
-		}
-	}
-	if (!found) {
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return 0;
-	}
-
-	if (!stop)
-		goto skip_stop_dma;
-
-	status = get_channel_status(ch, req, true);
-	req->bytes_transferred = dma_active_count(ch, req, status);
-
-	if (!list_empty(&ch->list)) {
-		/* if the list is not empty, queue the next request */
-		struct tegra_dma_req *next_req;
-		next_req = list_entry(ch->list.next,
-			typeof(*next_req), node);
-		tegra_dma_update_hw(ch, next_req);
-	}
-
-skip_stop_dma:
-	req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
-
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	/* Callback should be called without any lock */
-	req->complete(req);
-	return 0;
-}
-EXPORT_SYMBOL(tegra_dma_dequeue_req);
-
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch)
-{
-	unsigned long irq_flags;
-	bool is_empty;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	if (list_empty(&ch->list))
-		is_empty = true;
-	else
-		is_empty = false;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-	return is_empty;
-}
-EXPORT_SYMBOL(tegra_dma_is_empty);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *_req)
-{
-	unsigned long irq_flags;
-	struct tegra_dma_req *req;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	list_for_each_entry(req, &ch->list, node) {
-		if (req == _req) {
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return true;
-		}
-	}
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-	return false;
-}
-EXPORT_SYMBOL(tegra_dma_is_req_inflight);
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req)
-{
-	unsigned long irq_flags;
-	struct tegra_dma_req *_req;
-	int start_dma = 0;
-
-	if (req->size > NV_DMA_MAX_TRASFER_SIZE ||
-		req->source_addr & 0x3 || req->dest_addr & 0x3) {
-		pr_err("Invalid DMA request for channel %d\n", ch->id);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-
-	list_for_each_entry(_req, &ch->list, node) {
-		if (req == _req) {
-		    spin_unlock_irqrestore(&ch->lock, irq_flags);
-		    return -EEXIST;
-		}
-	}
-
-	req->bytes_transferred = 0;
-	req->status = 0;
-	req->buffer_status = 0;
-	if (list_empty(&ch->list))
-		start_dma = 1;
-
-	list_add_tail(&req->node, &ch->list);
-
-	if (start_dma)
-		tegra_dma_update_hw(ch, req);
-
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(tegra_dma_enqueue_req);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode)
-{
-	int channel;
-	struct tegra_dma_channel *ch = NULL;
-
-	if (!tegra_dma_initialized)
-		return NULL;
-
-	mutex_lock(&tegra_dma_lock);
-
-	/* first channel is the shared channel */
-	if (mode & TEGRA_DMA_SHARED) {
-		channel = TEGRA_SYSTEM_DMA_CH_MIN;
-	} else {
-		channel = find_first_zero_bit(channel_usage,
-			ARRAY_SIZE(dma_channels));
-		if (channel >= ARRAY_SIZE(dma_channels))
-			goto out;
-	}
-	__set_bit(channel, channel_usage);
-	ch = &dma_channels[channel];
-	ch->mode = mode;
-
-out:
-	mutex_unlock(&tegra_dma_lock);
-	return ch;
-}
-EXPORT_SYMBOL(tegra_dma_allocate_channel);
-
-void tegra_dma_free_channel(struct tegra_dma_channel *ch)
-{
-	if (ch->mode & TEGRA_DMA_SHARED)
-		return;
-	tegra_dma_cancel(ch);
-	mutex_lock(&tegra_dma_lock);
-	__clear_bit(ch->id, channel_usage);
-	mutex_unlock(&tegra_dma_lock);
-}
-EXPORT_SYMBOL(tegra_dma_free_channel);
-
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req)
-{
-	u32 apb_ptr;
-	u32 ahb_ptr;
-
-	if (req->to_memory) {
-		apb_ptr = req->source_addr;
-		ahb_ptr = req->dest_addr;
-	} else {
-		apb_ptr = req->dest_addr;
-		ahb_ptr = req->source_addr;
-	}
-	writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
-	writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
-	req->status = TEGRA_DMA_REQ_INFLIGHT;
-	return;
-}
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req)
-{
-	int ahb_addr_wrap;
-	int apb_addr_wrap;
-	int ahb_bus_width;
-	int apb_bus_width;
-	int index;
-
-	u32 ahb_seq;
-	u32 apb_seq;
-	u32 ahb_ptr;
-	u32 apb_ptr;
-	u32 csr;
-
-	csr = CSR_IE_EOC | CSR_FLOW;
-	ahb_seq = AHB_SEQ_INTR_ENB | AHB_SEQ_BURST_1;
-	apb_seq = 0;
-
-	csr |= req->req_sel << CSR_REQ_SEL_SHIFT;
-
-	/* One shot mode is always single buffered,
-	 * continuous mode is always double buffered
-	 * */
-	if (ch->mode & TEGRA_DMA_MODE_ONESHOT) {
-		csr |= CSR_ONCE;
-		ch->req_transfer_count = (req->size >> 2) - 1;
-	} else {
-		ahb_seq |= AHB_SEQ_DBL_BUF;
-
-		/* In double buffered mode, we set the size to half the
-		 * requested size and interrupt when half the buffer
-		 * is full */
-		ch->req_transfer_count = (req->size >> 3) - 1;
-	}
-
-	csr |= ch->req_transfer_count << CSR_WCOUNT_SHIFT;
-
-	if (req->to_memory) {
-		apb_ptr = req->source_addr;
-		ahb_ptr = req->dest_addr;
-
-		apb_addr_wrap = req->source_wrap;
-		ahb_addr_wrap = req->dest_wrap;
-		apb_bus_width = req->source_bus_width;
-		ahb_bus_width = req->dest_bus_width;
-
-	} else {
-		csr |= CSR_DIR;
-		apb_ptr = req->dest_addr;
-		ahb_ptr = req->source_addr;
-
-		apb_addr_wrap = req->dest_wrap;
-		ahb_addr_wrap = req->source_wrap;
-		apb_bus_width = req->dest_bus_width;
-		ahb_bus_width = req->source_bus_width;
-	}
-
-	apb_addr_wrap >>= 2;
-	ahb_addr_wrap >>= 2;
-
-	/* set address wrap for APB size */
-	index = 0;
-	do  {
-		if (apb_addr_wrap_table[index] == apb_addr_wrap)
-			break;
-		index++;
-	} while (index < ARRAY_SIZE(apb_addr_wrap_table));
-	BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table));
-	apb_seq |= index << APB_SEQ_WRAP_SHIFT;
-
-	/* set address wrap for AHB size */
-	index = 0;
-	do  {
-		if (ahb_addr_wrap_table[index] == ahb_addr_wrap)
-			break;
-		index++;
-	} while (index < ARRAY_SIZE(ahb_addr_wrap_table));
-	BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table));
-	ahb_seq |= index << AHB_SEQ_WRAP_SHIFT;
-
-	for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
-		if (bus_width_table[index] == ahb_bus_width)
-			break;
-	}
-	BUG_ON(index == ARRAY_SIZE(bus_width_table));
-	ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT;
-
-	for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
-		if (bus_width_table[index] == apb_bus_width)
-			break;
-	}
-	BUG_ON(index == ARRAY_SIZE(bus_width_table));
-	apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT;
-
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-	writel(apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ);
-	writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
-	writel(ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ);
-	writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
-	csr |= CSR_ENB;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	req->status = TEGRA_DMA_REQ_INFLIGHT;
-}
-
-static void handle_oneshot_dma(struct tegra_dma_channel *ch)
-{
-	struct tegra_dma_req *req;
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	if (list_empty(&ch->list)) {
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return;
-	}
-
-	req = list_entry(ch->list.next, typeof(*req), node);
-	if (req) {
-		int bytes_transferred;
-
-		bytes_transferred = ch->req_transfer_count;
-		bytes_transferred += 1;
-		bytes_transferred <<= 2;
-
-		list_del(&req->node);
-		req->bytes_transferred = bytes_transferred;
-		req->status = TEGRA_DMA_REQ_SUCCESS;
-
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		/* Callback should be called without any lock */
-		pr_debug("%s: transferred %d bytes\n", __func__,
-			req->bytes_transferred);
-		req->complete(req);
-		spin_lock_irqsave(&ch->lock, irq_flags);
-	}
-
-	if (!list_empty(&ch->list)) {
-		req = list_entry(ch->list.next, typeof(*req), node);
-		/* the complete function we just called may have enqueued
-		   another req, in which case dma has already started */
-		if (req->status != TEGRA_DMA_REQ_INFLIGHT)
-			tegra_dma_update_hw(ch, req);
-	}
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static void handle_continuous_dma(struct tegra_dma_channel *ch)
-{
-	struct tegra_dma_req *req;
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	if (list_empty(&ch->list)) {
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return;
-	}
-
-	req = list_entry(ch->list.next, typeof(*req), node);
-	if (req) {
-		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) {
-			bool is_dma_ping_complete;
-			is_dma_ping_complete = (readl(ch->addr + APB_DMA_CHAN_STA)
-						& STA_PING_PONG) ? true : false;
-			if (req->to_memory)
-				is_dma_ping_complete = !is_dma_ping_complete;
-			/* Out of sync - Release current buffer */
-			if (!is_dma_ping_complete) {
-				int bytes_transferred;
-
-				bytes_transferred = ch->req_transfer_count;
-				bytes_transferred += 1;
-				bytes_transferred <<= 3;
-				req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
-				req->bytes_transferred = bytes_transferred;
-				req->status = TEGRA_DMA_REQ_SUCCESS;
-				tegra_dma_stop(ch);
-
-				if (!list_is_last(&req->node, &ch->list)) {
-					struct tegra_dma_req *next_req;
-
-					next_req = list_entry(req->node.next,
-						typeof(*next_req), node);
-					tegra_dma_update_hw(ch, next_req);
-				}
-
-				list_del(&req->node);
-
-				/* DMA lock is NOT held when callbak is called */
-				spin_unlock_irqrestore(&ch->lock, irq_flags);
-				req->complete(req);
-				return;
-			}
-			/* Load the next request into the hardware, if available
-			 * */
-			if (!list_is_last(&req->node, &ch->list)) {
-				struct tegra_dma_req *next_req;
-
-				next_req = list_entry(req->node.next,
-					typeof(*next_req), node);
-				tegra_dma_update_hw_partial(ch, next_req);
-			}
-			req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL;
-			req->status = TEGRA_DMA_REQ_SUCCESS;
-			/* DMA lock is NOT held when callback is called */
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			if (likely(req->threshold))
-				req->threshold(req);
-			return;
-
-		} else if (req->buffer_status ==
-			TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) {
-			/* Callback when the buffer is completely full (i.e on
-			 * the second  interrupt */
-			int bytes_transferred;
-
-			bytes_transferred = ch->req_transfer_count;
-			bytes_transferred += 1;
-			bytes_transferred <<= 3;
-
-			req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
-			req->bytes_transferred = bytes_transferred;
-			req->status = TEGRA_DMA_REQ_SUCCESS;
-			list_del(&req->node);
-
-			/* DMA lock is NOT held when callbak is called */
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			req->complete(req);
-			return;
-
-		} else {
-			BUG();
-		}
-	}
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static irqreturn_t dma_isr(int irq, void *data)
-{
-	struct tegra_dma_channel *ch = data;
-	unsigned long status;
-
-	status = readl(ch->addr + APB_DMA_CHAN_STA);
-	if (status & STA_ISE_EOC)
-		writel(status, ch->addr + APB_DMA_CHAN_STA);
-	else {
-		pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id);
-		return IRQ_HANDLED;
-	}
-	return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t dma_thread_fn(int irq, void *data)
-{
-	struct tegra_dma_channel *ch = data;
-
-	if (ch->mode & TEGRA_DMA_MODE_ONESHOT)
-		handle_oneshot_dma(ch);
-	else
-		handle_continuous_dma(ch);
-
-
-	return IRQ_HANDLED;
-}
-
-int __init tegra_dma_init(void)
-{
-	int ret = 0;
-	int i;
-	unsigned int irq;
-	void __iomem *addr;
-	struct clk *c;
-
-	bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS);
-
-	c = clk_get_sys("tegra-apbdma", NULL);
-	if (IS_ERR(c)) {
-		pr_err("Unable to get clock for APB DMA\n");
-		ret = PTR_ERR(c);
-		goto fail;
-	}
-	ret = clk_prepare_enable(c);
-	if (ret != 0) {
-		pr_err("Unable to enable clock for APB DMA\n");
-		goto fail;
-	}
-
-	addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	writel(GEN_ENABLE, addr + APB_DMA_GEN);
-	writel(0, addr + APB_DMA_CNTRL);
-	writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX),
-	       addr + APB_DMA_IRQ_MASK_SET);
-
-	for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
-		struct tegra_dma_channel *ch = &dma_channels[i];
-
-		ch->id = i;
-		snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i);
-
-		ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
-			TEGRA_APB_DMA_CH0_SIZE * i);
-
-		spin_lock_init(&ch->lock);
-		INIT_LIST_HEAD(&ch->list);
-
-		irq = INT_APB_DMA_CH0 + i;
-		ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0,
-			dma_channels[i].name, ch);
-		if (ret) {
-			pr_err("Failed to register IRQ %d for DMA %d\n",
-				irq, i);
-			goto fail;
-		}
-		ch->irq = irq;
-
-		__clear_bit(i, channel_usage);
-	}
-	/* mark the shared channel allocated */
-	__set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage);
-
-	tegra_dma_initialized = true;
-
-	return 0;
-fail:
-	writel(0, addr + APB_DMA_GEN);
-	for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
-		struct tegra_dma_channel *ch = &dma_channels[i];
-		if (ch->irq)
-			free_irq(ch->irq, ch);
-	}
-	return ret;
-}
-postcore_initcall(tegra_dma_init);
-
-#ifdef CONFIG_PM
-static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3];
-
-void tegra_dma_suspend(void)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	u32 *ctx = apb_dma;
-	int i;
-
-	*ctx++ = readl(addr + APB_DMA_GEN);
-	*ctx++ = readl(addr + APB_DMA_CNTRL);
-	*ctx++ = readl(addr + APB_DMA_IRQ_MASK);
-
-	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
-		addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
-				  TEGRA_APB_DMA_CH0_SIZE * i);
-
-		*ctx++ = readl(addr + APB_DMA_CHAN_CSR);
-		*ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR);
-		*ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ);
-		*ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR);
-		*ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ);
-	}
-}
-
-void tegra_dma_resume(void)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	u32 *ctx = apb_dma;
-	int i;
-
-	writel(*ctx++, addr + APB_DMA_GEN);
-	writel(*ctx++, addr + APB_DMA_CNTRL);
-	writel(*ctx++, addr + APB_DMA_IRQ_MASK);
-
-	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
-		addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
-				  TEGRA_APB_DMA_CH0_SIZE * i);
-
-		writel(*ctx++, addr + APB_DMA_CHAN_CSR);
-		writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR);
-		writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ);
-		writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR);
-		writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ);
-	}
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index f946d129423c..0b7db174a5de 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -93,9 +93,9 @@ void tegra_init_fuse(void)
 {
 	u32 id;
 
-	u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+	u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 	reg |= 1 << 28;
-	writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+	writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 
 	reg = tegra_fuse_readl(FUSE_SKU_INFO);
 	tegra_sku_id = reg & 0xFF;
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index fef9c2c51370..6addc78cb6b2 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -7,17 +7,13 @@
 
 #include "flowctrl.h"
 #include "reset.h"
+#include "sleep.h"
 
 #define APB_MISC_GP_HIDREV	0x804
 #define PMC_SCRATCH41	0x140
 
 #define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
 
-	.macro mov32, reg, val
-	movw	\reg, #:lower16:\val
-	movt	\reg, #:upper16:\val
-	.endm
-
         .section ".text.head", "ax"
 	__CPUINIT
 
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index d8dc9ddd6d18..dca5141a2c31 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -1,123 +1,48 @@
 /*
- *  linux/arch/arm/mach-realview/hotplug.c
  *
  *  Copyright (C) 2002 ARM Ltd.
  *  All Rights Reserved
+ *  Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #include <linux/kernel.h>
-#include <linux/errno.h>
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/cp15.h>
+#include <asm/smp_plat.h>
 
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
+#include "sleep.h"
+#include "tegra_cpu_car.h"
 
-	asm volatile(
-	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-
-		/*if (pen_release == cpu) {*/
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		/*}*/
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
+static void (*tegra_hotplug_shutdown)(void);
 
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref tegra_cpu_die(unsigned int cpu)
 {
-	int spurious = 0;
+	cpu = cpu_logical_map(cpu);
 
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
+	/* Flush the L1 data cache. */
+	flush_cache_all();
 
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
+	/* Shut down the current CPU. */
+	tegra_hotplug_shutdown();
 
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+	/* Clock gate the CPU */
+	tegra_wait_cpu_in_reset(cpu);
+	tegra_disable_cpu_clock(cpu);
+
+	/* Should never return here. */
+	BUG();
 }
 
-int platform_cpu_disable(unsigned int cpu)
+int tegra_cpu_disable(unsigned int cpu)
 {
 	/*
 	 * we don't allow CPU 0 to be shutdown (it is still too special
@@ -125,3 +50,19 @@ int platform_cpu_disable(unsigned int cpu)
 	 */
 	return cpu == 0 ? -EPERM : 0;
 }
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+extern void tegra20_hotplug_shutdown(void);
+void __init tegra20_hotplug_init(void)
+{
+	tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
+}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+extern void tegra30_hotplug_shutdown(void);
+void __init tegra30_hotplug_init(void)
+{
+	tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+}
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h
index d97e403303a0..95f3a547c770 100644
--- a/arch/arm/mach-tegra/include/mach/clk.h
+++ b/arch/arm/mach-tegra/include/mach/clk.h
@@ -34,7 +34,10 @@ enum tegra_clk_ex_param {
 void tegra_periph_reset_deassert(struct clk *c);
 void tegra_periph_reset_assert(struct clk *c);
 
+#ifndef CONFIG_COMMON_CLK
 unsigned long clk_get_rate_all_locked(struct clk *c);
+#endif
+
 void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
 int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting);
 
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index 9077092812c0..3081cc6dda3b 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -51,101 +51,4 @@
 #define TEGRA_DMA_REQ_SEL_OWR			25
 #define TEGRA_DMA_REQ_SEL_INVALID		31
 
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
-enum tegra_dma_mode {
-	TEGRA_DMA_SHARED = 1,
-	TEGRA_DMA_MODE_CONTINOUS = 2,
-	TEGRA_DMA_MODE_ONESHOT = 4,
-};
-
-enum tegra_dma_req_error {
-	TEGRA_DMA_REQ_SUCCESS = 0,
-	TEGRA_DMA_REQ_ERROR_ABORTED,
-	TEGRA_DMA_REQ_INFLIGHT,
-};
-
-enum tegra_dma_req_buff_status {
-	TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0,
-	TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL,
-	TEGRA_DMA_REQ_BUF_STATUS_FULL,
-};
-
-struct tegra_dma_req {
-	struct list_head node;
-	unsigned int modid;
-	int instance;
-
-	/* Called when the req is complete and from the DMA ISR context.
-	 * When this is called the req structure is no longer queued by
-	 * the DMA channel.
-	 *
-	 * State of the DMA depends on the number of req it has. If there are
-	 * no DMA requests queued up, then it will STOP the DMA. It there are
-	 * more requests in the DMA, then it will queue the next request.
-	 */
-	void (*complete)(struct tegra_dma_req *req);
-
-	/*  This is a called from the DMA ISR context when the DMA is still in
-	 *  progress and is actively filling same buffer.
-	 *
-	 *  In case of continuous mode receive, this threshold is 1/2 the buffer
-	 *  size. In other cases, this will not even be called as there is no
-	 *  hardware support for it.
-	 *
-	 * In the case of continuous mode receive, if there is next req already
-	 * queued, DMA programs the HW to use that req when this req is
-	 * completed. If there is no "next req" queued, then DMA ISR doesn't do
-	 * anything before calling this callback.
-	 *
-	 *	This is mainly used by the cases, where the clients has queued
-	 *	only one req and want to get some sort of DMA threshold
-	 *	callback to program the next buffer.
-	 *
-	 */
-	void (*threshold)(struct tegra_dma_req *req);
-
-	/* 1 to copy to memory.
-	 * 0 to copy from the memory to device FIFO */
-	int to_memory;
-
-	void *virt_addr;
-
-	unsigned long source_addr;
-	unsigned long dest_addr;
-	unsigned long dest_wrap;
-	unsigned long source_wrap;
-	unsigned long source_bus_width;
-	unsigned long dest_bus_width;
-	unsigned long req_sel;
-	unsigned int size;
-
-	/* Updated by the DMA driver on the conpletion of the request. */
-	int bytes_transferred;
-	int status;
-
-	/* DMA completion tracking information */
-	int buffer_status;
-
-	/* Client specific data */
-	void *dev;
-};
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-void tegra_dma_dequeue(struct tegra_dma_channel *ch);
-void tegra_dma_flush(struct tegra_dma_channel *ch);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode);
-void tegra_dma_free_channel(struct tegra_dma_channel *ch);
-
-int __init tegra_dma_init(void);
-
 #endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-tegra/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
deleted file mode 100644
index fe700f9ce7dc..000000000000
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/io.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IO_H
-#define __MACH_TEGRA_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-#ifndef __ASSEMBLER__
-
-#ifdef CONFIG_TEGRA_PCI
-extern void __iomem *tegra_pcie_io_base;
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT);
-}
-#else
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#endif
-
-#define __io(a)         __io(a)
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index 7e76da73121c..fee3a94c4549 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -303,6 +303,9 @@
 #define IO_APB_VIRT	IOMEM(0xFE300000)
 #define IO_APB_SIZE	SZ_1M
 
+#define TEGRA_PCIE_BASE		0x80000000
+#define TEGRA_PCIE_IO_BASE	(TEGRA_PCIE_BASE + SZ_4M)
+
 #define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
 
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
deleted file mode 100644
index a13025612939..000000000000
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Platform definitions for tegra-kbc keyboard input driver
- *
- * Copyright (c) 2010-2011, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_TEGRA_KBC_H
-#define ASMARM_ARCH_TEGRA_KBC_H
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-#define KBC_MAX_GPIO	24
-#define KBC_MAX_KPENT	8
-
-#define KBC_MAX_ROW	16
-#define KBC_MAX_COL	8
-#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
-
-enum tegra_pin_type {
-	PIN_CFG_IGNORE,
-	PIN_CFG_COL,
-	PIN_CFG_ROW,
-};
-
-struct tegra_kbc_pin_cfg {
-	enum tegra_pin_type type;
-	unsigned char num;
-};
-
-struct tegra_kbc_wake_key {
-	u8 row:4;
-	u8 col:4;
-};
-
-struct tegra_kbc_platform_data {
-	unsigned int debounce_cnt;
-	unsigned int repeat_cnt;
-
-	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
-	const struct matrix_keymap_data *keymap_data;
-
-	u32 wakeup_key;
-	bool wakeup;
-	bool use_fn_map;
-	bool use_ghost_filter;
-};
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/pinconf-tegra.h b/arch/arm/mach-tegra/include/mach/pinconf-tegra.h
deleted file mode 100644
index 1f24d304921e..000000000000
--- a/arch/arm/mach-tegra/include/mach/pinconf-tegra.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * pinctrl configuration definitions for the NVIDIA Tegra pinmux
- *
- * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#ifndef __PINCONF_TEGRA_H__
-#define __PINCONF_TEGRA_H__
-
-enum tegra_pinconf_param {
-	/* argument: tegra_pinconf_pull */
-	TEGRA_PINCONF_PARAM_PULL,
-	/* argument: tegra_pinconf_tristate */
-	TEGRA_PINCONF_PARAM_TRISTATE,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_ENABLE_INPUT,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_OPEN_DRAIN,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_LOCK,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_IORESET,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_SCHMITT,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
-};
-
-enum tegra_pinconf_pull {
-	TEGRA_PINCONFIG_PULL_NONE,
-	TEGRA_PINCONFIG_PULL_DOWN,
-	TEGRA_PINCONFIG_PULL_UP,
-};
-
-enum tegra_pinconf_tristate {
-	TEGRA_PINCONFIG_DRIVEN,
-	TEGRA_PINCONFIG_TRISTATE,
-};
-
-#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
-#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
-#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/sdhci.h b/arch/arm/mach-tegra/include/mach/sdhci.h
deleted file mode 100644
index 4231bc7b8652..000000000000
--- a/arch/arm/mach-tegra/include/mach/sdhci.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-tegra/include/mach/sdhci.h
- *
- * Copyright (C) 2009 Palm, Inc.
- * Author: Yvonne Yip <y@palm.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARM_ARCH_TEGRA_SDHCI_H
-#define __ASM_ARM_ARCH_TEGRA_SDHCI_H
-
-#include <linux/mmc/host.h>
-
-struct tegra_sdhci_platform_data {
-	int cd_gpio;
-	int wp_gpio;
-	int power_gpio;
-	int is_8bit;
-	int pm_flags;
-};
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/smmu.h b/arch/arm/mach-tegra/include/mach/smmu.h
deleted file mode 100644
index dad403a9cf00..000000000000
--- a/arch/arm/mach-tegra/include/mach/smmu.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * IOMMU API for SMMU in Tegra30
- *
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef	MACH_SMMU_H
-#define	MACH_SMMU_H
-
-enum smmu_hwgrp {
-	HWGRP_AFI,
-	HWGRP_AVPC,
-	HWGRP_DC,
-	HWGRP_DCB,
-	HWGRP_EPP,
-	HWGRP_G2,
-	HWGRP_HC,
-	HWGRP_HDA,
-	HWGRP_ISP,
-	HWGRP_MPE,
-	HWGRP_NV,
-	HWGRP_NV2,
-	HWGRP_PPCS,
-	HWGRP_SATA,
-	HWGRP_VDE,
-	HWGRP_VI,
-
-	HWGRP_COUNT,
-
-	HWGRP_END = ~0,
-};
-
-#define HWG_AFI		(1 << HWGRP_AFI)
-#define HWG_AVPC	(1 << HWGRP_AVPC)
-#define HWG_DC		(1 << HWGRP_DC)
-#define HWG_DCB		(1 << HWGRP_DCB)
-#define HWG_EPP		(1 << HWGRP_EPP)
-#define HWG_G2		(1 << HWGRP_G2)
-#define HWG_HC		(1 << HWGRP_HC)
-#define HWG_HDA		(1 << HWGRP_HDA)
-#define HWG_ISP		(1 << HWGRP_ISP)
-#define HWG_MPE		(1 << HWGRP_MPE)
-#define HWG_NV		(1 << HWGRP_NV)
-#define HWG_NV2		(1 << HWGRP_NV2)
-#define HWG_PPCS	(1 << HWGRP_PPCS)
-#define HWG_SATA	(1 << HWGRP_SATA)
-#define HWG_VDE		(1 << HWGRP_VDE)
-#define HWG_VI		(1 << HWGRP_VI)
-
-#endif	/* MACH_SMMU_H */
diff --git a/arch/arm/mach-tegra/include/mach/suspend.h b/arch/arm/mach-tegra/include/mach/suspend.h
deleted file mode 100644
index 5af8715d2e1e..000000000000
--- a/arch/arm/mach-tegra/include/mach/suspend.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/suspend.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-
-#ifndef _MACH_TEGRA_SUSPEND_H_
-#define _MACH_TEGRA_SUSPEND_H_
-
-void tegra_pinmux_suspend(void);
-void tegra_irq_suspend(void);
-void tegra_gpio_suspend(void);
-void tegra_clk_suspend(void);
-void tegra_dma_suspend(void);
-void tegra_timer_suspend(void);
-
-void tegra_pinmux_resume(void);
-void tegra_irq_resume(void);
-void tegra_gpio_resume(void);
-void tegra_clk_resume(void);
-void tegra_dma_resume(void);
-void tegra_timer_resume(void);
-
-#endif /* _MACH_TEGRA_SUSPEND_H_ */
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
deleted file mode 100644
index 935ce9f65590..000000000000
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/usb_phy.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_USB_PHY_H
-#define __MACH_USB_PHY_H
-
-#include <linux/clk.h>
-#include <linux/usb/otg.h>
-
-struct tegra_utmip_config {
-	u8 hssync_start_delay;
-	u8 elastic_limit;
-	u8 idle_wait_delay;
-	u8 term_range_adj;
-	u8 xcvr_setup;
-	u8 xcvr_lsfslew;
-	u8 xcvr_lsrslew;
-};
-
-struct tegra_ulpi_config {
-	int reset_gpio;
-	const char *clk;
-};
-
-enum tegra_usb_phy_port_speed {
-	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
-	TEGRA_USB_PHY_PORT_SPEED_LOW,
-	TEGRA_USB_PHY_PORT_SPEED_HIGH,
-};
-
-enum tegra_usb_phy_mode {
-	TEGRA_USB_PHY_MODE_DEVICE,
-	TEGRA_USB_PHY_MODE_HOST,
-};
-
-struct tegra_xtal_freq;
-
-struct tegra_usb_phy {
-	int instance;
-	const struct tegra_xtal_freq *freq;
-	void __iomem *regs;
-	void __iomem *pad_regs;
-	struct clk *clk;
-	struct clk *pll_u;
-	struct clk *pad_clk;
-	enum tegra_usb_phy_mode mode;
-	void *config;
-	struct usb_phy *ulpi;
-};
-
-struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
-	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
-
-int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
-
-void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
-				 enum tegra_usb_phy_port_speed port_speed);
-
-void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_close(struct tegra_usb_phy *phy);
-
-#endif /* __MACH_USB_PHY_H */
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index d3ad5150d660..a8dba6489c9b 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -171,8 +171,6 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
  * 0x90000000 - 0x9fffffff - non-prefetchable memory
  * 0xa0000000 - 0xbfffffff - prefetchable memory
  */
-#define TEGRA_PCIE_BASE		0x80000000
-
 #define PCIE_REGS_SZ		SZ_16K
 #define PCIE_CFG_OFF		PCIE_REGS_SZ
 #define PCIE_CFG_SZ		SZ_1M
@@ -180,8 +178,6 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
 #define PCIE_EXT_CFG_SZ		SZ_1M
 #define PCIE_IOMAP_SZ		(PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
 
-#define MMIO_BASE		(TEGRA_PCIE_BASE + SZ_4M)
-#define MMIO_SIZE		SZ_64K
 #define MEM_BASE_0		(TEGRA_PCIE_BASE + SZ_256M)
 #define MEM_SIZE_0		SZ_128M
 #define MEM_BASE_1		(MEM_BASE_0 + MEM_SIZE_0)
@@ -204,10 +200,9 @@ struct tegra_pcie_port {
 
 	bool			link_up;
 
-	char			io_space_name[16];
 	char			mem_space_name[16];
 	char			prefetch_space_name[20];
-	struct resource		res[3];
+	struct resource		res[2];
 };
 
 struct tegra_pcie_info {
@@ -223,17 +218,7 @@ struct tegra_pcie_info {
 	struct clk		*pll_e;
 };
 
-static struct tegra_pcie_info tegra_pcie = {
-	.res_mmio = {
-		.name = "PCI IO",
-		.start = MMIO_BASE,
-		.end = MMIO_BASE + MMIO_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-void __iomem *tegra_pcie_io_base;
-EXPORT_SYMBOL(tegra_pcie_io_base);
+static struct tegra_pcie_info tegra_pcie;
 
 static inline void afi_writel(u32 value, unsigned long offset)
 {
@@ -367,17 +352,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
 /* Tegra PCIE requires relaxed ordering */
 static void __devinit tegra_pcie_relax_enable(struct pci_dev *dev)
 {
-	u16 val16;
-	int pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-
-	if (pos <= 0) {
-		dev_err(&dev->dev, "skipping relaxed ordering fixup\n");
-		return;
-	}
-
-	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &val16);
-	val16 |= PCI_EXP_DEVCTL_RELAX_EN;
-	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, val16);
+	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
 
@@ -391,24 +366,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	pp = tegra_pcie.port + nr;
 	pp->root_bus_nr = sys->busnr;
 
-	/*
-	 * IORESOURCE_IO
-	 */
-	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-		 "PCIe %d I/O", pp->index);
-	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-	pp->res[0].name = pp->io_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = PCIBIOS_MIN_IO;
-		pp->res[0].end = pp->res[0].start + SZ_32K - 1;
-	} else {
-		pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K;
-		pp->res[0].end = IO_SPACE_LIMIT;
-	}
-	pp->res[0].flags = IORESOURCE_IO;
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+	pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
 
 	/*
 	 * IORESOURCE_MEM
@@ -416,18 +374,18 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 		 "PCIe %d MEM", pp->index);
 	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[1].name = pp->mem_space_name;
+	pp->res[0].name = pp->mem_space_name;
 	if (pp->index == 0) {
-		pp->res[1].start = MEM_BASE_0;
-		pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1;
+		pp->res[0].start = MEM_BASE_0;
+		pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
 	} else {
-		pp->res[1].start = MEM_BASE_1;
-		pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1;
+		pp->res[0].start = MEM_BASE_1;
+		pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
 	}
-	pp->res[1].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[1]))
+	pp->res[0].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[0]))
 		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
 
 	/*
 	 * IORESOURCE_MEM | IORESOURCE_PREFETCH
@@ -435,18 +393,18 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
 		 "PCIe %d PREFETCH MEM", pp->index);
 	pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
-	pp->res[2].name = pp->prefetch_space_name;
+	pp->res[1].name = pp->prefetch_space_name;
 	if (pp->index == 0) {
-		pp->res[2].start = PREFETCH_MEM_BASE_0;
-		pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1;
+		pp->res[1].start = PREFETCH_MEM_BASE_0;
+		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
 	} else {
-		pp->res[2].start = PREFETCH_MEM_BASE_1;
-		pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1;
+		pp->res[1].start = PREFETCH_MEM_BASE_1;
+		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
 	}
-	pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-	if (request_resource(&iomem_resource, &pp->res[2]))
+	pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+	if (request_resource(&iomem_resource, &pp->res[1]))
 		panic("Request PCIe Prefetch Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
 
 	return 1;
 }
@@ -541,8 +499,8 @@ static void tegra_pcie_setup_translations(void)
 
 	/* Bar 2: downstream IO bar */
 	fpci_bar = ((__u32)0xfdfc << 16);
-	size = MMIO_SIZE;
-	axi_address = MMIO_BASE;
+	size = SZ_128K;
+	axi_address = TEGRA_PCIE_IO_BASE;
 	afi_writel(axi_address, AFI_AXI_BAR2_START);
 	afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
 	afi_writel(fpci_bar, AFI_FPCI_BAR2);
@@ -776,7 +734,6 @@ static void tegra_pcie_clocks_put(void)
 
 static int __init tegra_pcie_get_resources(void)
 {
-	struct resource *res_mmio = &tegra_pcie.res_mmio;
 	int err;
 
 	err = tegra_pcie_clocks_get();
@@ -798,34 +755,16 @@ static int __init tegra_pcie_get_resources(void)
 		goto err_map_reg;
 	}
 
-	err = request_resource(&iomem_resource, res_mmio);
-	if (err) {
-		pr_err("PCIE: Failed to request resources: %d\n", err);
-		goto err_req_io;
-	}
-
-	tegra_pcie_io_base = ioremap_nocache(res_mmio->start,
-					     resource_size(res_mmio));
-	if (tegra_pcie_io_base == NULL) {
-		pr_err("PCIE: Failed to map IO\n");
-		err = -ENOMEM;
-		goto err_map_io;
-	}
-
 	err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
 			  IRQF_SHARED, "PCIE", &tegra_pcie);
 	if (err) {
 		pr_err("PCIE: Failed to register IRQ: %d\n", err);
-		goto err_irq;
+		goto err_req_io;
 	}
 	set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
 
 	return 0;
 
-err_irq:
-	iounmap(tegra_pcie_io_base);
-err_map_io:
-	release_resource(&tegra_pcie.res_mmio);
 err_req_io:
 	iounmap(tegra_pcie.regs);
 err_map_reg:
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1a208dbf682f..81cb26591acf 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -31,6 +31,9 @@
 #include "fuse.h"
 #include "flowctrl.h"
 #include "reset.h"
+#include "tegra_cpu_car.h"
+
+#include "common.h"
 
 extern void tegra_secondary_startup(void);
 
@@ -38,19 +41,8 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
 
 #define EVP_CPU_RESET_VECTOR \
 	(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
-
-#define CPU_CLOCK(cpu)	(0x1<<(8+cpu))
-#define CPU_RESET(cpu)	(0x1111ul<<(cpu))
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
+
+static void __cpuinit tegra_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -63,13 +55,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 
 static int tegra20_power_up_cpu(unsigned int cpu)
 {
-	u32 reg;
-
 	/* Enable the CPU clock. */
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-	writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-	barrier();
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	tegra_enable_cpu_clock(cpu);
 
 	/* Clear flow controller CSR. */
 	flowctrl_write_cpu_csr(cpu, 0);
@@ -79,7 +66,6 @@ static int tegra20_power_up_cpu(unsigned int cpu)
 
 static int tegra30_power_up_cpu(unsigned int cpu)
 {
-	u32 reg;
 	int ret, pwrgateid;
 	unsigned long timeout;
 
@@ -103,8 +89,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
 	}
 
 	/* CPU partition is powered. Enable the CPU clock. */
-	writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+	tegra_enable_cpu_clock(cpu);
 	udelay(10);
 
 	/* Remove I/O clamps. */
@@ -117,7 +102,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
 	return 0;
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int status;
 
@@ -128,8 +113,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * via the flow controller). This will have no effect on first boot
 	 * of the CPU since it should already be in reset.
 	 */
-	writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
-	dmb();
+	tegra_put_cpu_in_reset(cpu);
 
 	/*
 	 * Unhalt the CPU. If the flow controller was used to power-gate the
@@ -155,8 +139,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 		goto done;
 
 	/* Take the CPU out of reset. */
-	writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
-	wmb();
+	tegra_cpu_out_of_reset(cpu);
 done:
 	return status;
 }
@@ -165,7 +148,7 @@ done:
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init tegra_smp_init_cpus(void)
 {
 	unsigned int i, ncores = scu_get_core_count(scu_base);
 
@@ -181,8 +164,19 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
 {
 	tegra_cpu_reset_handler_init();
 	scu_enable(scu_base);
 }
+
+struct smp_operations tegra_smp_ops __initdata = {
+	.smp_init_cpus		= tegra_smp_init_cpus,
+	.smp_prepare_cpus	= tegra_smp_prepare_cpus,
+	.smp_secondary_init	= tegra_secondary_init,
+	.smp_boot_secondary	= tegra_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= tegra_cpu_die,
+	.cpu_disable		= tegra_cpu_disable,
+#endif
+};
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 15d506501ccc..de0662de28a0 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -199,7 +199,9 @@ int __init tegra_powergate_init(void)
 
 #ifdef CONFIG_DEBUG_FS
 
-static const char * const powergate_name[] = {
+static const char * const *powergate_name;
+
+static const char * const powergate_name_t20[] = {
 	[TEGRA_POWERGATE_CPU]	= "cpu",
 	[TEGRA_POWERGATE_3D]	= "3d",
 	[TEGRA_POWERGATE_VENC]	= "venc",
@@ -209,6 +211,23 @@ static const char * const powergate_name[] = {
 	[TEGRA_POWERGATE_MPE]	= "mpe",
 };
 
+static const char * const powergate_name_t30[] = {
+	[TEGRA_POWERGATE_CPU]	= "cpu0",
+	[TEGRA_POWERGATE_3D]	= "3d0",
+	[TEGRA_POWERGATE_VENC]	= "venc",
+	[TEGRA_POWERGATE_VDEC]	= "vdec",
+	[TEGRA_POWERGATE_PCIE]	= "pcie",
+	[TEGRA_POWERGATE_L2]	= "l2",
+	[TEGRA_POWERGATE_MPE]	= "mpe",
+	[TEGRA_POWERGATE_HEG]	= "heg",
+	[TEGRA_POWERGATE_SATA]	= "sata",
+	[TEGRA_POWERGATE_CPU1]	= "cpu1",
+	[TEGRA_POWERGATE_CPU2]	= "cpu2",
+	[TEGRA_POWERGATE_CPU3]	= "cpu3",
+	[TEGRA_POWERGATE_CELP]	= "celp",
+	[TEGRA_POWERGATE_3D1]	= "3d1",
+};
+
 static int powergate_show(struct seq_file *s, void *data)
 {
 	int i;
@@ -237,14 +256,24 @@ static const struct file_operations powergate_fops = {
 int __init tegra_powergate_debugfs_init(void)
 {
 	struct dentry *d;
-	int err = -ENOMEM;
 
-	d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL,
-		&powergate_fops);
-	if (!d)
-		return -ENOMEM;
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		powergate_name = powergate_name_t20;
+		break;
+	case TEGRA30:
+		powergate_name = powergate_name_t30;
+		break;
+	}
+
+	if (powergate_name) {
+		d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL,
+			&powergate_fops);
+		if (!d)
+			return -ENOMEM;
+	}
 
-	return err;
+	return 0;
 }
 
 #endif
diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-t20.S
new file mode 100644
index 000000000000..a36ae413e2b8
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-t20.S
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/iomap.h>
+
+#include "sleep.h"
+#include "flowctrl.h"
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra20_hotplug_shutdown(void)
+ *
+ * puts the current cpu in reset
+ * should never return
+ */
+ENTRY(tegra20_hotplug_shutdown)
+	/* Turn off SMP coherency */
+	exit_smp r4, r5
+
+	/* Put this CPU down */
+	cpu_id	r0
+	bl	tegra20_cpu_shutdown
+	mov	pc, lr			@ should never get here
+ENDPROC(tegra20_hotplug_shutdown)
+
+/*
+ * tegra20_cpu_shutdown(int cpu)
+ *
+ * r0 is cpu to reset
+ *
+ * puts the specified CPU in wait-for-event mode on the flow controller
+ * and puts the CPU in reset
+ * can be called on the current cpu or another cpu
+ * if called on the current cpu, does not return
+ * MUST NOT BE CALLED FOR CPU 0.
+ *
+ * corrupts r0-r3, r12
+ */
+ENTRY(tegra20_cpu_shutdown)
+	cmp	r0, #0
+	moveq	pc, lr			@ must not be called for CPU 0
+
+	cpu_to_halt_reg r1, r0
+	ldr	r3, =TEGRA_FLOW_CTRL_VIRT
+	mov	r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME
+	str	r2, [r3, r1]		@ put flow controller in wait event mode
+	ldr	r2, [r3, r1]
+	isb
+	dsb
+	movw	r1, 0x1011
+	mov	r1, r1, lsl r0
+	ldr	r3, =TEGRA_CLK_RESET_VIRT
+	str	r1, [r3, #0x340]	@ put slave CPU in reset
+	isb
+	dsb
+	cpu_id	r3
+	cmp	r3, r0
+	beq	.
+	mov	pc, lr
+ENDPROC(tegra20_cpu_shutdown)
+#endif
diff --git a/arch/arm/mach-tegra/sleep-t30.S b/arch/arm/mach-tegra/sleep-t30.S
new file mode 100644
index 000000000000..777d9cee8b90
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-t30.S
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/iomap.h>
+
+#include "sleep.h"
+#include "flowctrl.h"
+
+#define TEGRA30_POWER_HOTPLUG_SHUTDOWN	(1 << 27) /* Hotplug shutdown */
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra30_hotplug_shutdown(void)
+ *
+ * Powergates the current CPU.
+ * Should never return.
+ */
+ENTRY(tegra30_hotplug_shutdown)
+	/* Turn off SMP coherency */
+	exit_smp r4, r5
+
+	/* Powergate this CPU */
+	mov	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+	bl	tegra30_cpu_shutdown
+	mov	pc, lr			@ should never get here
+ENDPROC(tegra30_hotplug_shutdown)
+
+/*
+ * tegra30_cpu_shutdown(unsigned long flags)
+ *
+ * Puts the current CPU in wait-for-event mode on the flow controller
+ * and powergates it -- flags (in R0) indicate the request type.
+ * Must never be called for CPU 0.
+ *
+ * corrupts r0-r4, r12
+ */
+ENTRY(tegra30_cpu_shutdown)
+	cpu_id	r3
+	cmp	r3, #0
+	moveq	pc, lr		@ Must never be called for CPU 0
+
+	ldr	r12, =TEGRA_FLOW_CTRL_VIRT
+	cpu_to_csr_reg r1, r3
+	add	r1, r1, r12	@ virtual CSR address for this CPU
+	cpu_to_halt_reg r2, r3
+	add	r2, r2, r12	@ virtual HALT_EVENTS address for this CPU
+
+	/*
+	 * Clear this CPU's "event" and "interrupt" flags and power gate
+	 * it when halting but not before it is in the "WFE" state.
+	 */
+	movw	r12, \
+		FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
+		FLOW_CTRL_CSR_ENABLE
+	mov	r4, #(1 << 4)
+	orr	r12, r12, r4, lsl r3
+	str	r12, [r1]
+
+	/* Halt this CPU. */
+	mov	r3, #0x400
+delay_1:
+	subs	r3, r3, #1			@ delay as a part of wfe war.
+	bge	delay_1;
+	cpsid	a				@ disable imprecise aborts.
+	ldr	r3, [r1]			@ read CSR
+	str	r3, [r1]			@ clear CSR
+	tst	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+	movne	r3, #FLOW_CTRL_WAITEVENT		@ For hotplug
+	str	r3, [r2]
+	ldr	r0, [r2]
+	b	wfe_war
+
+__cpu_reset_again:
+	dsb
+	.align 5
+	wfe					@ CPU should be power gated here
+wfe_war:
+	b	__cpu_reset_again
+
+	/*
+	 * 38 nop's, which fills reset of wfe cache line and
+	 * 4 more cachelines with nop
+	 */
+	.rept 38
+	nop
+	.endr
+	b	.				@ should never get here
+
+ENDPROC(tegra30_cpu_shutdown)
+#endif
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index d29b156a8011..ea81554c4833 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -29,36 +29,5 @@
 #include <mach/iomap.h>
 
 #include "flowctrl.h"
+#include "sleep.h"
 
-#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
-					+ IO_PPSB_VIRT)
-
-/* returns the offset of the flow controller halt register for a cpu */
-.macro cpu_to_halt_reg rd, rcpu
-	cmp	\rcpu, #0
-	subne	\rd, \rcpu, #1
-	movne	\rd, \rd, lsl #3
-	addne	\rd, \rd, #0x14
-	moveq	\rd, #0
-.endm
-
-/* returns the offset of the flow controller csr register for a cpu */
-.macro cpu_to_csr_reg rd, rcpu
-	cmp	\rcpu, #0
-	subne	\rd, \rcpu, #1
-	movne	\rd, \rd, lsl #3
-	addne	\rd, \rd, #0x18
-	moveq	\rd, #8
-.endm
-
-/* returns the ID of the current processor */
-.macro cpu_id, rd
-	mrc	p15, 0, \rd, c0, c0, 5
-	and	\rd, \rd, #0xF
-.endm
-
-/* loads a 32-bit value into a register without a data access */
-.macro mov32, reg, val
-	movw	\reg, #:lower16:\val
-	movt	\reg, #:upper16:\val
-.endm
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
new file mode 100644
index 000000000000..e25a7cd703d9
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_SLEEP_H
+#define __MACH_TEGRA_SLEEP_H
+
+#include <mach/iomap.h>
+
+#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+					+ IO_CPU_VIRT)
+#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+					+ IO_PPSB_VIRT)
+#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
+					+ IO_PPSB_VIRT)
+
+#ifdef __ASSEMBLY__
+/* returns the offset of the flow controller halt register for a cpu */
+.macro cpu_to_halt_reg rd, rcpu
+	cmp	\rcpu, #0
+	subne	\rd, \rcpu, #1
+	movne	\rd, \rd, lsl #3
+	addne	\rd, \rd, #0x14
+	moveq	\rd, #0
+.endm
+
+/* returns the offset of the flow controller csr register for a cpu */
+.macro cpu_to_csr_reg rd, rcpu
+	cmp	\rcpu, #0
+	subne	\rd, \rcpu, #1
+	movne	\rd, \rd, lsl #3
+	addne	\rd, \rd, #0x18
+	moveq	\rd, #8
+.endm
+
+/* returns the ID of the current processor */
+.macro cpu_id, rd
+	mrc	p15, 0, \rd, c0, c0, 5
+	and	\rd, \rd, #0xF
+.endm
+
+/* loads a 32-bit value into a register without a data access */
+.macro mov32, reg, val
+	movw	\reg, #:lower16:\val
+	movt	\reg, #:upper16:\val
+.endm
+
+/* Macro to exit SMP coherency. */
+.macro exit_smp, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c1, c0, 1	@ ACTLR
+	bic	\tmp1, \tmp1, #(1<<6) | (1<<0)	@ clear ACTLR.SMP | ACTLR.FW
+	mcr	p15, 0, \tmp1, c1, c0, 1	@ ACTLR
+	isb
+	cpu_id	\tmp1
+	mov	\tmp1, \tmp1, lsl #2
+	mov	\tmp2, #0xf
+	mov	\tmp2, \tmp2, lsl \tmp1
+	mov32	\tmp1, TEGRA_ARM_PERIF_VIRT + 0xC
+	str	\tmp2, [\tmp1]			@ invalidate SCU tags for CPU
+	dsb
+.endm
+#else
+
+#ifdef CONFIG_HOTPLUG_CPU
+void tegra20_hotplug_init(void);
+void tegra30_hotplug_init(void);
+#else
+static inline void tegra20_hotplug_init(void) {}
+static inline void tegra30_hotplug_init(void) {}
+#endif
+
+#endif
+#endif
diff --git a/arch/arm/mach-tegra/tegra20_clocks.c b/arch/arm/mach-tegra/tegra20_clocks.c
new file mode 100644
index 000000000000..deb873fb12b6
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20_clocks.c
@@ -0,0 +1,1624 @@
+/*
+ * arch/arm/mach-tegra/tegra20_clocks.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+
+#include <mach/iomap.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra2_emc.h"
+#include "tegra_cpu_car.h"
+
+#define RST_DEVICES			0x004
+#define RST_DEVICES_SET			0x300
+#define RST_DEVICES_CLR			0x304
+#define RST_DEVICES_NUM			3
+
+#define CLK_OUT_ENB			0x010
+#define CLK_OUT_ENB_SET			0x320
+#define CLK_OUT_ENB_CLR			0x324
+#define CLK_OUT_ENB_NUM			3
+
+#define CLK_MASK_ARM			0x44
+#define MISC_CLK_ENB			0x48
+
+#define OSC_CTRL			0x50
+#define OSC_CTRL_OSC_FREQ_MASK		(3<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ		(0<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ	(1<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ		(2<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ		(3<<30)
+#define OSC_CTRL_MASK			(0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_FREQ_DET			0x58
+#define OSC_FREQ_DET_TRIG		(1<<31)
+
+#define OSC_FREQ_DET_STATUS		0x5C
+#define OSC_FREQ_DET_BUSY		(1<<31)
+#define OSC_FREQ_DET_CNT_MASK		0xFFFF
+
+#define PERIPH_CLK_SOURCE_I2S1		0x100
+#define PERIPH_CLK_SOURCE_EMC		0x19c
+#define PERIPH_CLK_SOURCE_OSC		0x1fc
+#define PERIPH_CLK_SOURCE_NUM \
+	((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
+
+#define PERIPH_CLK_SOURCE_MASK		(3<<30)
+#define PERIPH_CLK_SOURCE_SHIFT		30
+#define PERIPH_CLK_SOURCE_PWM_MASK	(7<<28)
+#define PERIPH_CLK_SOURCE_PWM_SHIFT	28
+#define PERIPH_CLK_SOURCE_ENABLE	(1<<28)
+#define PERIPH_CLK_SOURCE_DIVU71_MASK	0xFF
+#define PERIPH_CLK_SOURCE_DIVU16_MASK	0xFFFF
+#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
+
+#define SDMMC_CLK_INT_FB_SEL		(1 << 23)
+#define SDMMC_CLK_INT_FB_DLY_SHIFT	16
+#define SDMMC_CLK_INT_FB_DLY_MASK	(0xF << SDMMC_CLK_INT_FB_DLY_SHIFT)
+
+#define PLL_BASE			0x0
+#define PLL_BASE_BYPASS			(1<<31)
+#define PLL_BASE_ENABLE			(1<<30)
+#define PLL_BASE_REF_ENABLE		(1<<29)
+#define PLL_BASE_OVERRIDE		(1<<28)
+#define PLL_BASE_DIVP_MASK		(0x7<<20)
+#define PLL_BASE_DIVP_SHIFT		20
+#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
+#define PLL_BASE_DIVN_SHIFT		8
+#define PLL_BASE_DIVM_MASK		(0x1F)
+#define PLL_BASE_DIVM_SHIFT		0
+
+#define PLL_OUT_RATIO_MASK		(0xFF<<8)
+#define PLL_OUT_RATIO_SHIFT		8
+#define PLL_OUT_OVERRIDE		(1<<2)
+#define PLL_OUT_CLKEN			(1<<1)
+#define PLL_OUT_RESET_DISABLE		(1<<0)
+
+#define PLL_MISC(c) (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
+
+#define PLL_MISC_DCCON_SHIFT		20
+#define PLL_MISC_CPCON_SHIFT		8
+#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
+#define PLL_MISC_LFCON_SHIFT		4
+#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
+#define PLL_MISC_VCOCON_SHIFT		0
+#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
+
+#define PLLU_BASE_POST_DIV		(1<<20)
+
+#define PLLD_MISC_CLKENABLE		(1<<30)
+#define PLLD_MISC_DIV_RST		(1<<23)
+#define PLLD_MISC_DCCON_SHIFT		12
+
+#define PLLE_MISC_READY			(1 << 15)
+
+#define PERIPH_CLK_TO_ENB_REG(c)	((c->u.periph.clk_num / 32) * 4)
+#define PERIPH_CLK_TO_ENB_SET_REG(c)	((c->u.periph.clk_num / 32) * 8)
+#define PERIPH_CLK_TO_ENB_BIT(c)	(1 << (c->u.periph.clk_num % 32))
+
+#define SUPER_CLK_MUX			0x00
+#define SUPER_STATE_SHIFT		28
+#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
+#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
+#define SUPER_SOURCE_MASK		0xF
+#define	SUPER_FIQ_SOURCE_SHIFT		12
+#define	SUPER_IRQ_SOURCE_SHIFT		8
+#define	SUPER_RUN_SOURCE_SHIFT		4
+#define	SUPER_IDLE_SOURCE_SHIFT		0
+
+#define SUPER_CLK_DIVIDER		0x04
+
+#define BUS_CLK_DISABLE			(1<<3)
+#define BUS_CLK_DIV_MASK		0x3
+
+#define PMC_CTRL			0x0
+ #define PMC_CTRL_BLINK_ENB		(1 << 7)
+
+#define PMC_DPD_PADS_ORIDE		0x1c
+ #define PMC_DPD_PADS_ORIDE_BLINK_ENB	(1 << 20)
+
+#define PMC_BLINK_TIMER_DATA_ON_SHIFT	0
+#define PMC_BLINK_TIMER_DATA_ON_MASK	0x7fff
+#define PMC_BLINK_TIMER_ENB		(1 << 15)
+#define PMC_BLINK_TIMER_DATA_OFF_SHIFT	16
+#define PMC_BLINK_TIMER_DATA_OFF_MASK	0xffff
+
+/* Tegra CPU clock and reset control regs */
+#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX		0x4c
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET	0x340
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR	0x344
+
+#define CPU_CLOCK(cpu)	(0x1 << (8 + cpu))
+#define CPU_RESET(cpu)	(0x1111ul << (cpu))
+
+static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
+static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
+
+/*
+ * Some clocks share a register with other clocks.  Any clock op that
+ * non-atomically modifies a register used by another clock must lock
+ * clock_register_lock first.
+ */
+static DEFINE_SPINLOCK(clock_register_lock);
+
+/*
+ * Some peripheral clocks share an enable bit, so refcount the enable bits
+ * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
+ */
+static int tegra_periph_clk_enable_refcount[3 * 32];
+
+#define clk_writel(value, reg) \
+	__raw_writel(value, reg_clk_base + (reg))
+#define clk_readl(reg) \
+	__raw_readl(reg_clk_base + (reg))
+#define pmc_writel(value, reg) \
+	__raw_writel(value, reg_pmc_base + (reg))
+#define pmc_readl(reg) \
+	__raw_readl(reg_pmc_base + (reg))
+
+static unsigned long clk_measure_input_freq(void)
+{
+	u32 clock_autodetect;
+	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
+	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
+	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
+	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
+		return 12000000;
+	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
+		return 13000000;
+	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
+		return 19200000;
+	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
+		return 26000000;
+	} else {
+		pr_err("%s: Unexpected clock autodetect value %d",
+						__func__, clock_autodetect);
+		BUG();
+		return 0;
+	}
+}
+
+static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+	s64 divider_u71 = parent_rate * 2;
+	divider_u71 += rate - 1;
+	do_div(divider_u71, rate);
+
+	if (divider_u71 - 2 < 0)
+		return 0;
+
+	if (divider_u71 - 2 > 255)
+		return -EINVAL;
+
+	return divider_u71 - 2;
+}
+
+static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+	s64 divider_u16;
+
+	divider_u16 = parent_rate;
+	divider_u16 += rate - 1;
+	do_div(divider_u16, rate);
+
+	if (divider_u16 - 1 < 0)
+		return 0;
+
+	if (divider_u16 - 1 > 0xFFFF)
+		return -EINVAL;
+
+	return divider_u16 - 1;
+}
+
+static unsigned long tegra_clk_fixed_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return to_clk_tegra(hw)->fixed_rate;
+}
+
+struct clk_ops tegra_clk_32k_ops = {
+	.recalc_rate = tegra_clk_fixed_recalc_rate,
+};
+
+/* clk_m functions */
+static unsigned long tegra20_clk_m_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	if (!to_clk_tegra(hw)->fixed_rate)
+		to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq();
+	return to_clk_tegra(hw)->fixed_rate;
+}
+
+static void tegra20_clk_m_init(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 osc_ctrl = clk_readl(OSC_CTRL);
+	u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
+
+	switch (c->fixed_rate) {
+	case 12000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
+		break;
+	case 13000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
+		break;
+	case 19200000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
+		break;
+	case 26000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
+		break;
+	default:
+		BUG();
+	}
+	clk_writel(auto_clock_control, OSC_CTRL);
+}
+
+struct clk_ops tegra_clk_m_ops = {
+	.init = tegra20_clk_m_init,
+	.recalc_rate = tegra20_clk_m_recalc_rate,
+};
+
+/* super clock functions */
+/* "super clocks" on tegra have two-stage muxes and a clock skipping
+ * super divider.  We will ignore the clock skipping divider, since we
+ * can't lower the voltage when using the clock skip, but we can if we
+ * lower the PLL frequency.
+ */
+static int tegra20_super_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+
+	val = clk_readl(c->reg + SUPER_CLK_MUX);
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	c->state = ON;
+	return c->state;
+}
+
+static int tegra20_super_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
+	return 0;
+}
+
+static void tegra20_super_clk_disable(struct clk_hw *hw)
+{
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+	/* oops - don't disable the CPU clock! */
+	BUG();
+}
+
+static u8 tegra20_super_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	int val = clk_readl(c->reg + SUPER_CLK_MUX);
+	int source;
+	int shift;
+
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	source = (val >> shift) & SUPER_SOURCE_MASK;
+	return source;
+}
+
+static int tegra20_super_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg + SUPER_CLK_MUX);
+	int shift;
+
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	val &= ~(SUPER_SOURCE_MASK << shift);
+	val |= index << shift;
+
+	clk_writel(val, c->reg);
+
+	return 0;
+}
+
+/* FIX ME: Need to switch parents to change the source PLL rate */
+static unsigned long tegra20_super_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	return prate;
+}
+
+static long tegra20_super_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	return *prate;
+}
+
+static int tegra20_super_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	return 0;
+}
+
+struct clk_ops tegra_super_ops = {
+	.is_enabled = tegra20_super_clk_is_enabled,
+	.enable = tegra20_super_clk_enable,
+	.disable = tegra20_super_clk_disable,
+	.set_parent = tegra20_super_clk_set_parent,
+	.get_parent = tegra20_super_clk_get_parent,
+	.set_rate = tegra20_super_clk_set_rate,
+	.round_rate = tegra20_super_clk_round_rate,
+	.recalc_rate = tegra20_super_clk_recalc_rate,
+};
+
+static unsigned long tegra20_twd_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
+}
+
+struct clk_ops tegra_twd_ops = {
+	.recalc_rate = tegra20_twd_clk_recalc_rate,
+};
+
+static u8 tegra20_cop_clk_get_parent(struct clk_hw *hw)
+{
+	return 0;
+}
+
+struct clk_ops tegra_cop_ops = {
+	.get_parent = tegra20_cop_clk_get_parent,
+};
+
+/* virtual cop clock functions. Used to acquire the fake 'cop' clock to
+ * reset the COP block (i.e. AVP) */
+void tegra2_cop_clk_reset(struct clk_hw *hw, bool assert)
+{
+	unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
+
+	pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert");
+	clk_writel(1 << 1, reg);
+}
+
+/* bus clock functions */
+static int tegra20_bus_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+
+	c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
+	return c->state;
+}
+
+static int tegra20_bus_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	val = clk_readl(c->reg);
+	val &= ~(BUS_CLK_DISABLE << c->reg_shift);
+	clk_writel(val, c->reg);
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+
+	return 0;
+}
+
+static void tegra20_bus_clk_disable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	val = clk_readl(c->reg);
+	val |= BUS_CLK_DISABLE << c->reg_shift;
+	clk_writel(val, c->reg);
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+}
+
+static unsigned long tegra20_bus_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+	u64 rate = prate;
+
+	c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
+	c->mul = 1;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+	return rate;
+}
+
+static int tegra20_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	int ret = -EINVAL;
+	unsigned long flags;
+	u32 val;
+	int i;
+
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	val = clk_readl(c->reg);
+	for (i = 1; i <= 4; i++) {
+		if (rate == parent_rate / i) {
+			val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
+			val |= (i - 1) << c->reg_shift;
+			clk_writel(val, c->reg);
+			c->div = i;
+			c->mul = 1;
+			ret = 0;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+
+	return ret;
+}
+
+static long tegra20_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	s64 divider;
+
+	if (rate >= parent_rate)
+		return rate;
+
+	divider = parent_rate;
+	divider += rate - 1;
+	do_div(divider, rate);
+
+	if (divider < 0)
+		return divider;
+
+	if (divider > 4)
+		divider = 4;
+	do_div(parent_rate, divider);
+
+	return parent_rate;
+}
+
+struct clk_ops tegra_bus_ops = {
+	.is_enabled = tegra20_bus_clk_is_enabled,
+	.enable = tegra20_bus_clk_enable,
+	.disable = tegra20_bus_clk_disable,
+	.set_rate = tegra20_bus_clk_set_rate,
+	.round_rate = tegra20_bus_clk_round_rate,
+	.recalc_rate = tegra20_bus_clk_recalc_rate,
+};
+
+/* Blink output functions */
+static int tegra20_blink_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+
+	val = pmc_readl(PMC_CTRL);
+	c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
+	return c->state;
+}
+
+static unsigned long tegra20_blink_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = prate;
+	u32 val;
+
+	c->mul = 1;
+	val = pmc_readl(c->reg);
+
+	if (val & PMC_BLINK_TIMER_ENB) {
+		unsigned int on_off;
+
+		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
+			PMC_BLINK_TIMER_DATA_ON_MASK;
+		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+		on_off += val;
+		/* each tick in the blink timer is 4 32KHz clocks */
+		c->div = on_off * 4;
+	} else {
+		c->div = 1;
+	}
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+	return rate;
+}
+
+static int tegra20_blink_clk_enable(struct clk_hw *hw)
+{
+	u32 val;
+
+	val = pmc_readl(PMC_DPD_PADS_ORIDE);
+	pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+
+	val = pmc_readl(PMC_CTRL);
+	pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+	return 0;
+}
+
+static void tegra20_blink_clk_disable(struct clk_hw *hw)
+{
+	u32 val;
+
+	val = pmc_readl(PMC_CTRL);
+	pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+	val = pmc_readl(PMC_DPD_PADS_ORIDE);
+	pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+}
+
+static int tegra20_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+
+	if (rate >= parent_rate) {
+		c->div = 1;
+		pmc_writel(0, c->reg);
+	} else {
+		unsigned int on_off;
+		u32 val;
+
+		on_off = DIV_ROUND_UP(parent_rate / 8, rate);
+		c->div = on_off * 8;
+
+		val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
+			PMC_BLINK_TIMER_DATA_ON_SHIFT;
+		on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+		on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+		val |= on_off;
+		val |= PMC_BLINK_TIMER_ENB;
+		pmc_writel(val, c->reg);
+	}
+
+	return 0;
+}
+
+static long tegra20_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	int div;
+	int mul;
+	long round_rate = *prate;
+
+	mul = 1;
+
+	if (rate >= *prate) {
+		div = 1;
+	} else {
+		div = DIV_ROUND_UP(*prate / 8, rate);
+		div *= 8;
+	}
+
+	round_rate *= mul;
+	round_rate += div - 1;
+	do_div(round_rate, div);
+
+	return round_rate;
+}
+
+struct clk_ops tegra_blink_clk_ops = {
+	.is_enabled = tegra20_blink_clk_is_enabled,
+	.enable = tegra20_blink_clk_enable,
+	.disable = tegra20_blink_clk_disable,
+	.set_rate = tegra20_blink_clk_set_rate,
+	.round_rate = tegra20_blink_clk_round_rate,
+	.recalc_rate = tegra20_blink_clk_recalc_rate,
+};
+
+/* PLL Functions */
+static int tegra20_pll_clk_wait_for_lock(struct clk_tegra *c)
+{
+	udelay(c->u.pll.lock_delay);
+	return 0;
+}
+
+static int tegra20_pll_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg + PLL_BASE);
+
+	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+	return c->state;
+}
+
+static unsigned long tegra20_pll_clk_recalc_rate(struct clk_hw *hw,
+				unsigned long prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg + PLL_BASE);
+	u64 rate = prate;
+
+	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+		const struct clk_pll_freq_table *sel;
+		for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+			if (sel->input_rate == prate &&
+				sel->output_rate == c->u.pll.fixed_rate) {
+				c->mul = sel->n;
+				c->div = sel->m * sel->p;
+				break;
+			}
+		}
+		pr_err("Clock %s has unknown fixed frequency\n",
+			__clk_get_name(hw->clk));
+		BUG();
+	} else if (val & PLL_BASE_BYPASS) {
+		c->mul = 1;
+		c->div = 1;
+	} else {
+		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+		if (c->flags & PLLU)
+			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+		else
+			c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
+	}
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+	return rate;
+}
+
+static int tegra20_pll_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+	val = clk_readl(c->reg + PLL_BASE);
+	val &= ~PLL_BASE_BYPASS;
+	val |= PLL_BASE_ENABLE;
+	clk_writel(val, c->reg + PLL_BASE);
+
+	tegra20_pll_clk_wait_for_lock(c);
+
+	return 0;
+}
+
+static void tegra20_pll_clk_disable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+	val = clk_readl(c->reg);
+	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+	clk_writel(val, c->reg);
+}
+
+static int tegra20_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long input_rate = parent_rate;
+	const struct clk_pll_freq_table *sel;
+	u32 val;
+
+	pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+	if (c->flags & PLL_FIXED) {
+		int ret = 0;
+		if (rate != c->u.pll.fixed_rate) {
+			pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
+				__func__, __clk_get_name(hw->clk),
+				c->u.pll.fixed_rate, rate);
+			ret = -EINVAL;
+		}
+		return ret;
+	}
+
+	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+		if (sel->input_rate == input_rate && sel->output_rate == rate) {
+			c->mul = sel->n;
+			c->div = sel->m * sel->p;
+
+			val = clk_readl(c->reg + PLL_BASE);
+			if (c->flags & PLL_FIXED)
+				val |= PLL_BASE_OVERRIDE;
+			val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
+				 PLL_BASE_DIVM_MASK);
+			val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
+				(sel->n << PLL_BASE_DIVN_SHIFT);
+			BUG_ON(sel->p < 1 || sel->p > 2);
+			if (c->flags & PLLU) {
+				if (sel->p == 1)
+					val |= PLLU_BASE_POST_DIV;
+			} else {
+				if (sel->p == 2)
+					val |= 1 << PLL_BASE_DIVP_SHIFT;
+			}
+			clk_writel(val, c->reg + PLL_BASE);
+
+			if (c->flags & PLL_HAS_CPCON) {
+				val = clk_readl(c->reg + PLL_MISC(c));
+				val &= ~PLL_MISC_CPCON_MASK;
+				val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
+				clk_writel(val, c->reg + PLL_MISC(c));
+			}
+
+			if (c->state == ON)
+				tegra20_pll_clk_enable(hw);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static long tegra20_pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	const struct clk_pll_freq_table *sel;
+	unsigned long input_rate = *prate;
+	u64 output_rate = *prate;
+	int mul;
+	int div;
+
+	if (c->flags & PLL_FIXED)
+		return c->u.pll.fixed_rate;
+
+	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++)
+		if (sel->input_rate == input_rate && sel->output_rate == rate) {
+			mul = sel->n;
+			div = sel->m * sel->p;
+			break;
+		}
+
+	if (sel->input_rate == 0)
+		return -EINVAL;
+
+	output_rate *= mul;
+	output_rate += div - 1; /* round up */
+	do_div(output_rate, div);
+
+	return output_rate;
+}
+
+struct clk_ops tegra_pll_ops = {
+	.is_enabled = tegra20_pll_clk_is_enabled,
+	.enable = tegra20_pll_clk_enable,
+	.disable = tegra20_pll_clk_disable,
+	.set_rate = tegra20_pll_clk_set_rate,
+	.recalc_rate = tegra20_pll_clk_recalc_rate,
+	.round_rate = tegra20_pll_clk_round_rate,
+};
+
+static void tegra20_pllx_clk_init(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+
+	if (tegra_sku_id == 7)
+		c->max_rate = 750000000;
+}
+
+struct clk_ops tegra_pllx_ops = {
+	.init = tegra20_pllx_clk_init,
+	.is_enabled = tegra20_pll_clk_is_enabled,
+	.enable = tegra20_pll_clk_enable,
+	.disable = tegra20_pll_clk_disable,
+	.set_rate = tegra20_pll_clk_set_rate,
+	.recalc_rate = tegra20_pll_clk_recalc_rate,
+	.round_rate = tegra20_pll_clk_round_rate,
+};
+
+static int tegra20_plle_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+	mdelay(1);
+
+	val = clk_readl(c->reg + PLL_BASE);
+	if (!(val & PLLE_MISC_READY))
+		return -EBUSY;
+
+	val = clk_readl(c->reg + PLL_BASE);
+	val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS;
+	clk_writel(val, c->reg + PLL_BASE);
+
+	return 0;
+}
+
+struct clk_ops tegra_plle_ops = {
+	.is_enabled = tegra20_pll_clk_is_enabled,
+	.enable = tegra20_plle_clk_enable,
+	.set_rate = tegra20_pll_clk_set_rate,
+	.recalc_rate = tegra20_pll_clk_recalc_rate,
+	.round_rate = tegra20_pll_clk_round_rate,
+};
+
+/* Clock divider ops */
+static int tegra20_pll_div_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+
+	val >>= c->reg_shift;
+	c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
+	if (!(val & PLL_OUT_RESET_DISABLE))
+		c->state = OFF;
+	return c->state;
+}
+
+static unsigned long tegra20_pll_div_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = prate;
+	u32 val = clk_readl(c->reg);
+	u32 divu71;
+
+	val >>= c->reg_shift;
+
+	if (c->flags & DIV_U71) {
+		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+		c->div = (divu71 + 2);
+		c->mul = 2;
+	} else if (c->flags & DIV_2) {
+		c->div = 2;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+
+	rate *= c->mul;
+	rate += c->div - 1; /* round up */
+	do_div(rate, c->div);
+
+	return rate;
+}
+
+static int tegra20_pll_div_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+	u32 new_val;
+	u32 val;
+
+	pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
+
+	if (c->flags & DIV_U71) {
+		spin_lock_irqsave(&clock_register_lock, flags);
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel(val, c->reg);
+		spin_unlock_irqrestore(&clock_register_lock, flags);
+		return 0;
+	} else if (c->flags & DIV_2) {
+		BUG_ON(!(c->flags & PLLD));
+		spin_lock_irqsave(&clock_register_lock, flags);
+		val = clk_readl(c->reg);
+		val &= ~PLLD_MISC_DIV_RST;
+		clk_writel(val, c->reg);
+		spin_unlock_irqrestore(&clock_register_lock, flags);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void tegra20_pll_div_clk_disable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+	u32 new_val;
+	u32 val;
+
+	pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
+
+	if (c->flags & DIV_U71) {
+		spin_lock_irqsave(&clock_register_lock, flags);
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel(val, c->reg);
+		spin_unlock_irqrestore(&clock_register_lock, flags);
+	} else if (c->flags & DIV_2) {
+		BUG_ON(!(c->flags & PLLD));
+		spin_lock_irqsave(&clock_register_lock, flags);
+		val = clk_readl(c->reg);
+		val |= PLLD_MISC_DIV_RST;
+		clk_writel(val, c->reg);
+		spin_unlock_irqrestore(&clock_register_lock, flags);
+	}
+}
+
+static int tegra20_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+	int divider_u71;
+	u32 new_val;
+	u32 val;
+
+	pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+	if (c->flags & DIV_U71) {
+		divider_u71 = clk_div71_get_divider(parent_rate, rate);
+		if (divider_u71 >= 0) {
+			spin_lock_irqsave(&clock_register_lock, flags);
+			val = clk_readl(c->reg);
+			new_val = val >> c->reg_shift;
+			new_val &= 0xFFFF;
+			if (c->flags & DIV_U71_FIXED)
+				new_val |= PLL_OUT_OVERRIDE;
+			new_val &= ~PLL_OUT_RATIO_MASK;
+			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
+
+			val &= ~(0xFFFF << c->reg_shift);
+			val |= new_val << c->reg_shift;
+			clk_writel(val, c->reg);
+			c->div = divider_u71 + 2;
+			c->mul = 2;
+			spin_unlock_irqrestore(&clock_register_lock, flags);
+			return 0;
+		}
+	} else if (c->flags & DIV_2) {
+		if (parent_rate == rate * 2)
+			return 0;
+	}
+	return -EINVAL;
+}
+
+static long tegra20_pll_div_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long parent_rate = *prate;
+	int divider;
+
+	pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(parent_rate, rate);
+		if (divider < 0)
+			return divider;
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+	} else if (c->flags & DIV_2) {
+		return DIV_ROUND_UP(parent_rate, 2);
+	}
+	return -EINVAL;
+}
+
+struct clk_ops tegra_pll_div_ops = {
+	.is_enabled = tegra20_pll_div_clk_is_enabled,
+	.enable = tegra20_pll_div_clk_enable,
+	.disable = tegra20_pll_div_clk_disable,
+	.set_rate = tegra20_pll_div_clk_set_rate,
+	.round_rate = tegra20_pll_div_clk_round_rate,
+	.recalc_rate = tegra20_pll_div_clk_recalc_rate,
+};
+
+/* Periph clk ops */
+
+static int tegra20_periph_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+
+	c->state = ON;
+
+	if (!c->u.periph.clk_num)
+		goto out;
+
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+
+	if (!(c->flags & PERIPH_NO_RESET))
+		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
+				PERIPH_CLK_TO_ENB_BIT(c))
+			c->state = OFF;
+
+out:
+	return c->state;
+}
+
+static int tegra20_periph_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+	u32 val;
+
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+	if (!c->u.periph.clk_num)
+		return 0;
+
+	tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
+		return 0;
+
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (c->flags & PERIPH_EMC_ENB) {
+		/* The EMC peripheral clock has 2 extra enable bits */
+		/* FIXME: Do they need to be disabled? */
+		val = clk_readl(c->reg);
+		val |= 0x3 << 24;
+		clk_writel(val, c->reg);
+	}
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+
+	return 0;
+}
+
+static void tegra20_periph_clk_disable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long flags;
+
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
+
+	if (!c->u.periph.clk_num)
+		return;
+
+	tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0)
+		return;
+
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+}
+
+void tegra2_periph_clk_reset(struct clk_hw *hw, bool assert)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
+
+	pr_debug("%s %s on clock %s\n", __func__,
+		assert ? "assert" : "deassert", __clk_get_name(hw->clk));
+
+	BUG_ON(!c->u.periph.clk_num);
+
+	if (!(c->flags & PERIPH_NO_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			   base + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+static int tegra20_periph_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+	u32 mask;
+	u32 shift;
+
+	pr_debug("%s: %s %d\n", __func__, __clk_get_name(hw->clk), index);
+
+	if (c->flags & MUX_PWM) {
+		shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
+		mask = PERIPH_CLK_SOURCE_PWM_MASK;
+	} else {
+		shift = PERIPH_CLK_SOURCE_SHIFT;
+		mask = PERIPH_CLK_SOURCE_MASK;
+	}
+
+	val = clk_readl(c->reg);
+	val &= ~mask;
+	val |= (index) << shift;
+
+	clk_writel(val, c->reg);
+
+	return 0;
+}
+
+static u8 tegra20_periph_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+	u32 mask;
+	u32 shift;
+
+	if (c->flags & MUX_PWM) {
+		shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
+		mask = PERIPH_CLK_SOURCE_PWM_MASK;
+	} else {
+		shift = PERIPH_CLK_SOURCE_SHIFT;
+		mask = PERIPH_CLK_SOURCE_MASK;
+	}
+
+	if (c->flags & MUX)
+		return (val & mask) >> shift;
+	else
+		return 0;
+}
+
+static unsigned long tegra20_periph_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long rate = prate;
+	u32 val = clk_readl(c->reg);
+
+	if (c->flags & DIV_U71) {
+		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+		c->div = divu71 + 2;
+		c->mul = 2;
+	} else if (c->flags & DIV_U16) {
+		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+		c->div = divu16 + 1;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+		return rate;
+	}
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
+}
+
+static int tegra20_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+	int divider;
+
+	val = clk_readl(c->reg);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(parent_rate, rate);
+
+		if (divider >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
+			val |= divider;
+			clk_writel(val, c->reg);
+			c->div = divider + 2;
+			c->mul = 2;
+			return 0;
+		}
+	} else if (c->flags & DIV_U16) {
+		divider = clk_div16_get_divider(parent_rate, rate);
+		if (divider >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
+			val |= divider;
+			clk_writel(val, c->reg);
+			c->div = divider + 1;
+			c->mul = 1;
+			return 0;
+		}
+	} else if (parent_rate <= rate) {
+		c->div = 1;
+		c->mul = 1;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static long tegra20_periph_clk_round_rate(struct clk_hw *hw,
+	unsigned long rate, unsigned long *prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+	int divider;
+
+	pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate);
+
+	if (prate)
+		parent_rate = *prate;
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(parent_rate, rate);
+		if (divider < 0)
+			return divider;
+
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+	} else if (c->flags & DIV_U16) {
+		divider = clk_div16_get_divider(parent_rate, rate);
+		if (divider < 0)
+			return divider;
+		return DIV_ROUND_UP(parent_rate, divider + 1);
+	}
+	return -EINVAL;
+}
+
+struct clk_ops tegra_periph_clk_ops = {
+	.is_enabled = tegra20_periph_clk_is_enabled,
+	.enable = tegra20_periph_clk_enable,
+	.disable = tegra20_periph_clk_disable,
+	.set_parent = tegra20_periph_clk_set_parent,
+	.get_parent = tegra20_periph_clk_get_parent,
+	.set_rate = tegra20_periph_clk_set_rate,
+	.round_rate = tegra20_periph_clk_round_rate,
+	.recalc_rate = tegra20_periph_clk_recalc_rate,
+};
+
+/* External memory controller clock ops */
+static void tegra20_emc_clk_init(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	c->max_rate = __clk_get_rate(hw->clk);
+}
+
+static long tegra20_emc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	long emc_rate;
+	long clk_rate;
+
+	/*
+	 * The slowest entry in the EMC clock table that is at least as
+	 * fast as rate.
+	 */
+	emc_rate = tegra_emc_round_rate(rate);
+	if (emc_rate < 0)
+		return c->max_rate;
+
+	/*
+	 * The fastest rate the PLL will generate that is at most the
+	 * requested rate.
+	 */
+	clk_rate = tegra20_periph_clk_round_rate(hw, emc_rate, NULL);
+
+	/*
+	 * If this fails, and emc_rate > clk_rate, it's because the maximum
+	 * rate in the EMC tables is larger than the maximum rate of the EMC
+	 * clock. The EMC clock's max rate is the rate it was running when the
+	 * kernel booted. Such a mismatch is probably due to using the wrong
+	 * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
+	 */
+	WARN_ONCE(emc_rate != clk_rate,
+		"emc_rate %ld != clk_rate %ld",
+		emc_rate, clk_rate);
+
+	return emc_rate;
+}
+
+static int tegra20_emc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	int ret;
+
+	/*
+	 * The Tegra2 memory controller has an interlock with the clock
+	 * block that allows memory shadowed registers to be updated,
+	 * and then transfer them to the main registers at the same
+	 * time as the clock update without glitches.
+	 */
+	ret = tegra_emc_set_rate(rate);
+	if (ret < 0)
+		return ret;
+
+	ret = tegra20_periph_clk_set_rate(hw, rate, parent_rate);
+	udelay(1);
+
+	return ret;
+}
+
+struct clk_ops tegra_emc_clk_ops = {
+	.init = tegra20_emc_clk_init,
+	.is_enabled = tegra20_periph_clk_is_enabled,
+	.enable = tegra20_periph_clk_enable,
+	.disable = tegra20_periph_clk_disable,
+	.set_parent = tegra20_periph_clk_set_parent,
+	.get_parent = tegra20_periph_clk_get_parent,
+	.set_rate = tegra20_emc_clk_set_rate,
+	.round_rate = tegra20_emc_clk_round_rate,
+	.recalc_rate = tegra20_periph_clk_recalc_rate,
+};
+
+/* Clock doubler ops */
+static int tegra20_clk_double_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+
+	c->state = ON;
+
+	if (!c->u.periph.clk_num)
+		goto out;
+
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+
+out:
+	return c->state;
+};
+
+static unsigned long tegra20_clk_double_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = prate;
+
+	c->mul = 2;
+	c->div = 1;
+
+	rate *= c->mul;
+	rate += c->div - 1; /* round up */
+	do_div(rate, c->div);
+
+	return rate;
+}
+
+static long tegra20_clk_double_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	unsigned long output_rate = *prate;
+
+	do_div(output_rate, 2);
+	return output_rate;
+}
+
+static int tegra20_clk_double_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	if (rate != 2 * parent_rate)
+		return -EINVAL;
+	return 0;
+}
+
+struct clk_ops tegra_clk_double_ops = {
+	.is_enabled = tegra20_clk_double_is_enabled,
+	.enable = tegra20_periph_clk_enable,
+	.disable = tegra20_periph_clk_disable,
+	.set_rate = tegra20_clk_double_set_rate,
+	.recalc_rate = tegra20_clk_double_recalc_rate,
+	.round_rate = tegra20_clk_double_round_rate,
+};
+
+/* Audio sync clock ops */
+static int tegra20_audio_sync_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+
+	c->state = (val & (1<<4)) ? OFF : ON;
+	return c->state;
+}
+
+static int tegra20_audio_sync_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+
+	clk_writel(0, c->reg);
+	return 0;
+}
+
+static void tegra20_audio_sync_clk_disable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	clk_writel(1, c->reg);
+}
+
+static u8 tegra20_audio_sync_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+	int source;
+
+	source = val & 0xf;
+	return source;
+}
+
+static int tegra20_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+
+	val = clk_readl(c->reg);
+	val &= ~0xf;
+	val |= index;
+
+	clk_writel(val, c->reg);
+
+	return 0;
+}
+
+struct clk_ops tegra_audio_sync_clk_ops = {
+	.is_enabled = tegra20_audio_sync_clk_is_enabled,
+	.enable = tegra20_audio_sync_clk_enable,
+	.disable = tegra20_audio_sync_clk_disable,
+	.set_parent = tegra20_audio_sync_clk_set_parent,
+	.get_parent = tegra20_audio_sync_clk_get_parent,
+};
+
+/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */
+
+static int tegra20_cdev_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	/* We could un-tristate the cdev1 or cdev2 pingroup here; this is
+	 * currently done in the pinmux code. */
+	c->state = ON;
+
+	BUG_ON(!c->u.periph.clk_num);
+
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+	return c->state;
+}
+
+static int tegra20_cdev_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	BUG_ON(!c->u.periph.clk_num);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+	return 0;
+}
+
+static void tegra20_cdev_clk_disable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	BUG_ON(!c->u.periph.clk_num);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+static unsigned long tegra20_cdev_recalc_rate(struct clk_hw *hw,
+			unsigned long prate)
+{
+	return to_clk_tegra(hw)->fixed_rate;
+}
+
+struct clk_ops tegra_cdev_clk_ops = {
+	.is_enabled = tegra20_cdev_clk_is_enabled,
+	.enable = tegra20_cdev_clk_enable,
+	.disable = tegra20_cdev_clk_disable,
+	.recalc_rate = tegra20_cdev_recalc_rate,
+};
+
+/* Tegra20 CPU clock and reset control functions */
+static void tegra20_wait_cpu_in_reset(u32 cpu)
+{
+	unsigned int reg;
+
+	do {
+		reg = readl(reg_clk_base +
+			    TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+		cpu_relax();
+	} while (!(reg & (1 << cpu)));	/* check CPU been reset or not */
+
+	return;
+}
+
+static void tegra20_put_cpu_in_reset(u32 cpu)
+{
+	writel(CPU_RESET(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+	dmb();
+}
+
+static void tegra20_cpu_out_of_reset(u32 cpu)
+{
+	writel(CPU_RESET(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+	wmb();
+}
+
+static void tegra20_enable_cpu_clock(u32 cpu)
+{
+	unsigned int reg;
+
+	reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	writel(reg & ~CPU_CLOCK(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	barrier();
+	reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+static void tegra20_disable_cpu_clock(u32 cpu)
+{
+	unsigned int reg;
+
+	reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	writel(reg | CPU_CLOCK(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+static struct tegra_cpu_car_ops tegra20_cpu_car_ops = {
+	.wait_for_reset	= tegra20_wait_cpu_in_reset,
+	.put_in_reset	= tegra20_put_cpu_in_reset,
+	.out_of_reset	= tegra20_cpu_out_of_reset,
+	.enable_clock	= tegra20_enable_cpu_clock,
+	.disable_clock	= tegra20_disable_cpu_clock,
+};
+
+void __init tegra20_cpu_car_ops_init(void)
+{
+	tegra_cpu_car_ops = &tegra20_cpu_car_ops;
+}
diff --git a/arch/arm/mach-tegra/tegra20_clocks.h b/arch/arm/mach-tegra/tegra20_clocks.h
new file mode 100644
index 000000000000..8bfd31bcc490
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20_clocks.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA20_CLOCK_H
+#define __MACH_TEGRA20_CLOCK_H
+
+extern struct clk_ops tegra_clk_32k_ops;
+extern struct clk_ops tegra_pll_ops;
+extern struct clk_ops tegra_clk_m_ops;
+extern struct clk_ops tegra_pll_div_ops;
+extern struct clk_ops tegra_pllx_ops;
+extern struct clk_ops tegra_plle_ops;
+extern struct clk_ops tegra_clk_double_ops;
+extern struct clk_ops tegra_cdev_clk_ops;
+extern struct clk_ops tegra_audio_sync_clk_ops;
+extern struct clk_ops tegra_super_ops;
+extern struct clk_ops tegra_cpu_ops;
+extern struct clk_ops tegra_twd_ops;
+extern struct clk_ops tegra_cop_ops;
+extern struct clk_ops tegra_bus_ops;
+extern struct clk_ops tegra_blink_clk_ops;
+extern struct clk_ops tegra_emc_clk_ops;
+extern struct clk_ops tegra_periph_clk_ops;
+extern struct clk_ops tegra_clk_shared_bus_ops;
+
+void tegra2_periph_clk_reset(struct clk_hw *hw, bool assert);
+void tegra2_cop_clk_reset(struct clk_hw *hw, bool assert);
+
+#endif
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
new file mode 100644
index 000000000000..cc9b5fd8c3d3
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -0,0 +1,1139 @@
+/*
+ * arch/arm/mach-tegra/tegra2_clocks.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012 NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-private.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/iomap.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra2_emc.h"
+#include "tegra20_clocks.h"
+#include "tegra_cpu_car.h"
+
+/* Clock definitions */
+
+#define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags,		\
+		   _parent_names, _parents, _parent)		\
+	static struct clk tegra_##_name = {			\
+		.hw = &tegra_##_name##_hw.hw,			\
+		.name = #_name,					\
+		.rate = _rate,					\
+		.ops = _ops,					\
+		.flags = _flags,				\
+		.parent_names = _parent_names,			\
+		.parents = _parents,				\
+		.num_parents = ARRAY_SIZE(_parent_names),	\
+		.parent = _parent,				\
+	};
+
+static struct clk tegra_clk_32k;
+static struct clk_tegra tegra_clk_32k_hw = {
+	.hw = {
+		.clk = &tegra_clk_32k,
+	},
+	.fixed_rate = 32768,
+};
+
+static struct clk tegra_clk_32k = {
+	.name = "clk_32k",
+	.rate = 32768,
+	.ops = &tegra_clk_32k_ops,
+	.hw = &tegra_clk_32k_hw.hw,
+	.flags = CLK_IS_ROOT,
+};
+
+static struct clk tegra_clk_m;
+static struct clk_tegra tegra_clk_m_hw = {
+	.hw = {
+		.clk = &tegra_clk_m,
+	},
+	.flags = ENABLE_ON_INIT,
+	.reg = 0x1fc,
+	.reg_shift = 28,
+	.max_rate = 26000000,
+	.fixed_rate = 0,
+};
+
+static struct clk tegra_clk_m = {
+	.name = "clk_m",
+	.ops = &tegra_clk_m_ops,
+	.hw = &tegra_clk_m_hw.hw,
+	.flags = CLK_IS_ROOT,
+};
+
+#define DEFINE_PLL(_name, _flags, _reg, _max_rate, _input_min,	\
+		   _input_max, _cf_min, _cf_max, _vco_min,	\
+		   _vco_max, _freq_table, _lock_delay, _ops,	\
+		   _fixed_rate, _parent)			\
+	static const char *tegra_##_name##_parent_names[] = {	\
+		#_parent,					\
+	};							\
+	static struct clk *tegra_##_name##_parents[] = {	\
+		&tegra_##_parent,				\
+	};							\
+	static struct clk tegra_##_name;			\
+	static struct clk_tegra tegra_##_name##_hw = {		\
+		.hw = {						\
+			.clk = &tegra_##_name,			\
+		},						\
+		.flags = _flags,				\
+		.reg = _reg,					\
+		.max_rate = _max_rate,				\
+		.u.pll = {					\
+			.input_min = _input_min,		\
+			.input_max = _input_max,		\
+			.cf_min = _cf_min,			\
+			.cf_max = _cf_max,			\
+			.vco_min = _vco_min,			\
+			.vco_max = _vco_max,			\
+			.freq_table = _freq_table,		\
+			.lock_delay = _lock_delay,		\
+			.fixed_rate = _fixed_rate,		\
+		},						\
+	};							\
+	static struct clk tegra_##_name = {			\
+		.name = #_name,					\
+		.ops = &_ops,					\
+		.hw = &tegra_##_name##_hw.hw,			\
+		.parent = &tegra_##_parent,			\
+		.parent_names = tegra_##_name##_parent_names,	\
+		.parents = tegra_##_name##_parents,		\
+		.num_parents = 1,				\
+	};
+
+#define DEFINE_PLL_OUT(_name, _flags, _reg, _reg_shift,		\
+		_max_rate, _ops, _parent, _clk_flags)		\
+	static const char *tegra_##_name##_parent_names[] = {	\
+		#_parent,					\
+	};							\
+	static struct clk *tegra_##_name##_parents[] = {	\
+		&tegra_##_parent,				\
+	};							\
+	static struct clk tegra_##_name;			\
+	static struct clk_tegra tegra_##_name##_hw = {		\
+		.hw = {						\
+			.clk = &tegra_##_name,			\
+		},						\
+		.flags = _flags,				\
+		.reg = _reg,					\
+		.max_rate = _max_rate,				\
+		.reg_shift = _reg_shift,			\
+	};							\
+	static struct clk tegra_##_name = {			\
+		.name = #_name,					\
+		.ops = &tegra_pll_div_ops,			\
+		.hw = &tegra_##_name##_hw.hw,			\
+		.parent = &tegra_##_parent,			\
+		.parent_names = tegra_##_name##_parent_names,	\
+		.parents = tegra_##_name##_parents,		\
+		.num_parents = 1,				\
+		.flags = _clk_flags,				\
+	};
+
+
+static struct clk_pll_freq_table tegra_pll_s_freq_table[] = {
+	{32768, 12000000, 366, 1, 1, 0},
+	{32768, 13000000, 397, 1, 1, 0},
+	{32768, 19200000, 586, 1, 1, 0},
+	{32768, 26000000, 793, 1, 1, 0},
+	{0, 0, 0, 0, 0, 0},
+};
+
+DEFINE_PLL(pll_s, PLL_ALT_MISC_REG, 0xf0, 26000000, 32768, 32768, 0,
+		0, 12000000, 26000000, tegra_pll_s_freq_table, 300,
+		tegra_pll_ops, 0, clk_32k);
+
+static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+	{ 12000000, 600000000, 600, 12, 1, 8 },
+	{ 13000000, 600000000, 600, 13, 1, 8 },
+	{ 19200000, 600000000, 500, 16, 1, 6 },
+	{ 26000000, 600000000, 600, 26, 1, 8 },
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_c, PLL_HAS_CPCON, 0x80, 600000000, 2000000, 31000000, 1000000,
+		6000000, 20000000, 1400000000, tegra_pll_c_freq_table, 300,
+		tegra_pll_ops, 0, clk_m);
+
+DEFINE_PLL_OUT(pll_c_out1, DIV_U71, 0x84, 0, 600000000,
+		tegra_pll_div_ops, pll_c, 0);
+
+static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
+	{ 12000000, 666000000, 666, 12, 1, 8},
+	{ 13000000, 666000000, 666, 13, 1, 8},
+	{ 19200000, 666000000, 555, 16, 1, 8},
+	{ 26000000, 666000000, 666, 26, 1, 8},
+	{ 12000000, 600000000, 600, 12, 1, 8},
+	{ 13000000, 600000000, 600, 13, 1, 8},
+	{ 19200000, 600000000, 375, 12, 1, 6},
+	{ 26000000, 600000000, 600, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_m, PLL_HAS_CPCON, 0x90, 800000000, 2000000, 31000000, 1000000,
+		6000000, 20000000, 1200000000, tegra_pll_m_freq_table, 300,
+		tegra_pll_ops, 0, clk_m);
+
+DEFINE_PLL_OUT(pll_m_out1, DIV_U71, 0x94, 0, 600000000,
+		tegra_pll_div_ops, pll_m, 0);
+
+static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
+	{ 12000000, 216000000, 432, 12, 2, 8},
+	{ 13000000, 216000000, 432, 13, 2, 8},
+	{ 19200000, 216000000, 90,   4, 2, 1},
+	{ 26000000, 216000000, 432, 26, 2, 8},
+	{ 12000000, 432000000, 432, 12, 1, 8},
+	{ 13000000, 432000000, 432, 13, 1, 8},
+	{ 19200000, 432000000, 90,   4, 1, 1},
+	{ 26000000, 432000000, 432, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+
+DEFINE_PLL(pll_p, ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, 0xa0, 432000000,
+		2000000, 31000000, 1000000, 6000000, 20000000, 1400000000,
+		tegra_pll_p_freq_table, 300, tegra_pll_ops, 216000000, clk_m);
+
+DEFINE_PLL_OUT(pll_p_out1, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, 0,
+		432000000, tegra_pll_div_ops, pll_p, 0);
+DEFINE_PLL_OUT(pll_p_out2, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, 16,
+		432000000, tegra_pll_div_ops, pll_p, 0);
+DEFINE_PLL_OUT(pll_p_out3, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, 0,
+		432000000, tegra_pll_div_ops, pll_p, 0);
+DEFINE_PLL_OUT(pll_p_out4, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, 16,
+		432000000, tegra_pll_div_ops, pll_p, 0);
+
+static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
+	{ 28800000, 56448000, 49, 25, 1, 1},
+	{ 28800000, 73728000, 64, 25, 1, 1},
+	{ 28800000, 24000000,  5,  6, 1, 1},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_a, PLL_HAS_CPCON, 0xb0, 73728000, 2000000, 31000000, 1000000,
+		6000000, 20000000, 1400000000, tegra_pll_a_freq_table, 300,
+		tegra_pll_ops, 0, pll_p_out1);
+
+DEFINE_PLL_OUT(pll_a_out0, DIV_U71, 0xb4, 0, 73728000,
+		tegra_pll_div_ops, pll_a, 0);
+
+static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
+	{ 12000000, 216000000, 216, 12, 1, 4},
+	{ 13000000, 216000000, 216, 13, 1, 4},
+	{ 19200000, 216000000, 135, 12, 1, 3},
+	{ 26000000, 216000000, 216, 26, 1, 4},
+
+	{ 12000000, 594000000, 594, 12, 1, 8},
+	{ 13000000, 594000000, 594, 13, 1, 8},
+	{ 19200000, 594000000, 495, 16, 1, 8},
+	{ 26000000, 594000000, 594, 26, 1, 8},
+
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_d, PLL_HAS_CPCON | PLLD, 0xd0, 1000000000, 2000000, 40000000,
+		1000000, 6000000, 40000000, 1000000000, tegra_pll_d_freq_table,
+		1000, tegra_pll_ops, 0, clk_m);
+
+DEFINE_PLL_OUT(pll_d_out0, DIV_2 | PLLD, 0, 0, 500000000,
+		tegra_pll_div_ops, pll_d, CLK_SET_RATE_PARENT);
+
+static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
+	{ 12000000, 480000000, 960, 12, 2, 0},
+	{ 13000000, 480000000, 960, 13, 2, 0},
+	{ 19200000, 480000000, 200, 4,  2, 0},
+	{ 26000000, 480000000, 960, 26, 2, 0},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_u, PLLU, 0xc0, 480000000, 2000000, 40000000, 1000000, 6000000,
+		48000000, 960000000, tegra_pll_u_freq_table, 1000,
+		tegra_pll_ops, 0, clk_m);
+
+static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
+	/* 1 GHz */
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+
+	/* 912 MHz */
+	{ 12000000, 912000000,  912,  12, 1, 12},
+	{ 13000000, 912000000,  912,  13, 1, 12},
+	{ 19200000, 912000000,  760,  16, 1, 8},
+	{ 26000000, 912000000,  912,  26, 1, 12},
+
+	/* 816 MHz */
+	{ 12000000, 816000000,  816,  12, 1, 12},
+	{ 13000000, 816000000,  816,  13, 1, 12},
+	{ 19200000, 816000000,  680,  16, 1, 8},
+	{ 26000000, 816000000,  816,  26, 1, 12},
+
+	/* 760 MHz */
+	{ 12000000, 760000000,  760,  12, 1, 12},
+	{ 13000000, 760000000,  760,  13, 1, 12},
+	{ 19200000, 760000000,  950,  24, 1, 8},
+	{ 26000000, 760000000,  760,  26, 1, 12},
+
+	/* 750 MHz */
+	{ 12000000, 750000000,  750,  12, 1, 12},
+	{ 13000000, 750000000,  750,  13, 1, 12},
+	{ 19200000, 750000000,  625,  16, 1, 8},
+	{ 26000000, 750000000,  750,  26, 1, 12},
+
+	/* 608 MHz */
+	{ 12000000, 608000000,  608,  12, 1, 12},
+	{ 13000000, 608000000,  608,  13, 1, 12},
+	{ 19200000, 608000000,  380,  12, 1, 8},
+	{ 26000000, 608000000,  608,  26, 1, 12},
+
+	/* 456 MHz */
+	{ 12000000, 456000000,  456,  12, 1, 12},
+	{ 13000000, 456000000,  456,  13, 1, 12},
+	{ 19200000, 456000000,  380,  16, 1, 8},
+	{ 26000000, 456000000,  456,  26, 1, 12},
+
+	/* 312 MHz */
+	{ 12000000, 312000000,  312,  12, 1, 12},
+	{ 13000000, 312000000,  312,  13, 1, 12},
+	{ 19200000, 312000000,  260,  16, 1, 8},
+	{ 26000000, 312000000,  312,  26, 1, 12},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_x, PLL_HAS_CPCON | PLL_ALT_MISC_REG, 0xe0, 1000000000, 2000000,
+		31000000, 1000000, 6000000, 20000000, 1200000000,
+		tegra_pll_x_freq_table, 300, tegra_pllx_ops, 0, clk_m);
+
+static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
+	{ 12000000, 100000000,  200,  24, 1, 0 },
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_e, PLL_ALT_MISC_REG, 0xe8, 100000000, 12000000, 12000000, 0, 0,
+		0, 0, tegra_pll_e_freq_table, 0, tegra_plle_ops, 0, clk_m);
+
+static const char *tegra_common_parent_names[] = {
+	"clk_m",
+};
+
+static struct clk *tegra_common_parents[] = {
+	&tegra_clk_m,
+};
+
+static struct clk tegra_clk_d;
+static struct clk_tegra tegra_clk_d_hw = {
+	.hw = {
+		.clk = &tegra_clk_d,
+	},
+	.flags = PERIPH_NO_RESET,
+	.reg = 0x34,
+	.reg_shift = 12,
+	.max_rate = 52000000,
+	.u.periph = {
+		.clk_num = 90,
+	},
+};
+
+static struct clk tegra_clk_d = {
+	.name = "clk_d",
+	.hw = &tegra_clk_d_hw.hw,
+	.ops = &tegra_clk_double_ops,
+	.parent = &tegra_clk_m,
+	.parent_names = tegra_common_parent_names,
+	.parents = tegra_common_parents,
+	.num_parents = ARRAY_SIZE(tegra_common_parent_names),
+};
+
+static struct clk tegra_cdev1;
+static struct clk_tegra tegra_cdev1_hw = {
+	.hw = {
+		.clk = &tegra_cdev1,
+	},
+	.fixed_rate = 26000000,
+	.u.periph = {
+		.clk_num = 94,
+	},
+};
+static struct clk tegra_cdev1 = {
+	.name = "cdev1",
+	.hw = &tegra_cdev1_hw.hw,
+	.ops = &tegra_cdev_clk_ops,
+	.flags = CLK_IS_ROOT,
+};
+
+/* dap_mclk2, belongs to the cdev2 pingroup. */
+static struct clk tegra_cdev2;
+static struct clk_tegra tegra_cdev2_hw = {
+	.hw = {
+		.clk = &tegra_cdev2,
+	},
+	.fixed_rate = 26000000,
+	.u.periph = {
+		.clk_num  = 93,
+	},
+};
+static struct clk tegra_cdev2 = {
+	.name = "cdev2",
+	.hw = &tegra_cdev2_hw.hw,
+	.ops = &tegra_cdev_clk_ops,
+	.flags = CLK_IS_ROOT,
+};
+
+/* initialized before peripheral clocks */
+static struct clk_mux_sel mux_audio_sync_clk[8+1];
+static const struct audio_sources {
+	const char *name;
+	int value;
+} mux_audio_sync_clk_sources[] = {
+	{ .name = "spdif_in", .value = 0 },
+	{ .name = "i2s1", .value = 1 },
+	{ .name = "i2s2", .value = 2 },
+	{ .name = "pll_a_out0", .value = 4 },
+#if 0 /* FIXME: not implemented */
+	{ .name = "ac97", .value = 3 },
+	{ .name = "ext_audio_clk2", .value = 5 },
+	{ .name = "ext_audio_clk1", .value = 6 },
+	{ .name = "ext_vimclk", .value = 7 },
+#endif
+	{ NULL, 0 }
+};
+
+static const char *audio_parent_names[] = {
+	"spdif_in",
+	"i2s1",
+	"i2s2",
+	"dummy",
+	"pll_a_out0",
+	"dummy",
+	"dummy",
+	"dummy",
+};
+
+static struct clk *audio_parents[] = {
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+	NULL,
+};
+
+static struct clk tegra_audio;
+static struct clk_tegra tegra_audio_hw = {
+	.hw = {
+		.clk = &tegra_audio,
+	},
+	.reg = 0x38,
+	.max_rate = 73728000,
+};
+DEFINE_CLK_TEGRA(audio, 0, &tegra_audio_sync_clk_ops, 0, audio_parent_names,
+		audio_parents, NULL);
+
+static const char *audio_2x_parent_names[] = {
+	"audio",
+};
+
+static struct clk *audio_2x_parents[] = {
+	&tegra_audio,
+};
+
+static struct clk tegra_audio_2x;
+static struct clk_tegra tegra_audio_2x_hw = {
+	.hw = {
+		.clk = &tegra_audio_2x,
+	},
+	.flags = PERIPH_NO_RESET,
+	.max_rate = 48000000,
+	.reg = 0x34,
+	.reg_shift = 8,
+	.u.periph = {
+		.clk_num = 89,
+	},
+};
+DEFINE_CLK_TEGRA(audio_2x, 0, &tegra_clk_double_ops, 0, audio_2x_parent_names,
+		audio_2x_parents, &tegra_audio);
+
+static struct clk_lookup tegra_audio_clk_lookups[] = {
+	{ .con_id = "audio", .clk = &tegra_audio },
+	{ .con_id = "audio_2x", .clk = &tegra_audio_2x }
+};
+
+/* This is called after peripheral clocks are initialized, as the
+ * audio_sync clock depends on some of the peripheral clocks.
+ */
+
+static void init_audio_sync_clock_mux(void)
+{
+	int i;
+	struct clk_mux_sel *sel = mux_audio_sync_clk;
+	const struct audio_sources *src = mux_audio_sync_clk_sources;
+	struct clk_lookup *lookup;
+
+	for (i = 0; src->name; i++, sel++, src++) {
+		sel->input = tegra_get_clock_by_name(src->name);
+		if (!sel->input)
+			pr_err("%s: could not find clk %s\n", __func__,
+				src->name);
+		audio_parents[src->value] = sel->input;
+		sel->value = src->value;
+	}
+
+	lookup = tegra_audio_clk_lookups;
+	for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) {
+		struct clk *c = lookup->clk;
+		struct clk_tegra *clk = to_clk_tegra(c->hw);
+		__clk_init(NULL, c);
+		INIT_LIST_HEAD(&clk->shared_bus_list);
+		clk->lookup.con_id = lookup->con_id;
+		clk->lookup.clk = c;
+		clkdev_add(&clk->lookup);
+		tegra_clk_add(c);
+	}
+}
+
+static const char *mux_cclk[] = {
+	"clk_m",
+	"pll_c",
+	"clk_32k",
+	"pll_m",
+	"pll_p",
+	"pll_p_out4",
+	"pll_p_out3",
+	"clk_d",
+	"pll_x",
+};
+
+
+static struct clk *mux_cclk_p[] = {
+	&tegra_clk_m,
+	&tegra_pll_c,
+	&tegra_clk_32k,
+	&tegra_pll_m,
+	&tegra_pll_p,
+	&tegra_pll_p_out4,
+	&tegra_pll_p_out3,
+	&tegra_clk_d,
+	&tegra_pll_x,
+};
+
+static const char *mux_sclk[] = {
+	"clk_m",
+	"pll_c_out1",
+	"pll_p_out4",
+	"pllp_p_out3",
+	"pll_p_out2",
+	"clk_d",
+	"clk_32k",
+	"pll_m_out1",
+};
+
+static struct clk *mux_sclk_p[] = {
+	&tegra_clk_m,
+	&tegra_pll_c_out1,
+	&tegra_pll_p_out4,
+	&tegra_pll_p_out3,
+	&tegra_pll_p_out2,
+	&tegra_clk_d,
+	&tegra_clk_32k,
+	&tegra_pll_m_out1,
+};
+
+static struct clk tegra_cclk;
+static struct clk_tegra tegra_cclk_hw = {
+	.hw = {
+		.clk = &tegra_cclk,
+	},
+	.reg = 0x20,
+	.max_rate = 1000000000,
+};
+DEFINE_CLK_TEGRA(cclk, 0, &tegra_super_ops, 0, mux_cclk,
+		mux_cclk_p, NULL);
+
+static const char *mux_twd[] = {
+	"cclk",
+};
+
+static struct clk *mux_twd_p[] = {
+	&tegra_cclk,
+};
+
+static struct clk tegra_clk_twd;
+static struct clk_tegra tegra_clk_twd_hw = {
+	.hw = {
+		.clk = &tegra_clk_twd,
+	},
+	.max_rate = 1000000000,
+	.mul = 1,
+	.div = 4,
+};
+
+static struct clk tegra_clk_twd = {
+	.name = "twd",
+	.ops = &tegra_twd_ops,
+	.hw = &tegra_clk_twd_hw.hw,
+	.parent = &tegra_cclk,
+	.parent_names = mux_twd,
+	.parents = mux_twd_p,
+	.num_parents = ARRAY_SIZE(mux_twd),
+};
+
+static struct clk tegra_sclk;
+static struct clk_tegra tegra_sclk_hw = {
+	.hw = {
+		.clk = &tegra_sclk,
+	},
+	.reg = 0x28,
+	.max_rate = 240000000,
+	.min_rate = 120000000,
+};
+DEFINE_CLK_TEGRA(sclk, 0, &tegra_super_ops, 0, mux_sclk,
+		mux_sclk_p, NULL);
+
+static const char *tegra_cop_parent_names[] = {
+	"tegra_sclk",
+};
+
+static struct clk *tegra_cop_parents[] = {
+	&tegra_sclk,
+};
+
+static struct clk tegra_cop;
+static struct clk_tegra tegra_cop_hw = {
+	.hw = {
+		.clk = &tegra_cop,
+	},
+	.max_rate  = 240000000,
+	.reset = &tegra2_cop_clk_reset,
+};
+DEFINE_CLK_TEGRA(cop, 0, &tegra_cop_ops, CLK_SET_RATE_PARENT,
+		tegra_cop_parent_names, tegra_cop_parents, &tegra_sclk);
+
+static const char *tegra_hclk_parent_names[] = {
+	"tegra_sclk",
+};
+
+static struct clk *tegra_hclk_parents[] = {
+	&tegra_sclk,
+};
+
+static struct clk tegra_hclk;
+static struct clk_tegra tegra_hclk_hw = {
+	.hw = {
+		.clk = &tegra_hclk,
+	},
+	.flags = DIV_BUS,
+	.reg = 0x30,
+	.reg_shift = 4,
+	.max_rate = 240000000,
+};
+DEFINE_CLK_TEGRA(hclk, 0, &tegra_bus_ops, 0, tegra_hclk_parent_names,
+		tegra_hclk_parents, &tegra_sclk);
+
+static const char *tegra_pclk_parent_names[] = {
+	"tegra_hclk",
+};
+
+static struct clk *tegra_pclk_parents[] = {
+	&tegra_hclk,
+};
+
+static struct clk tegra_pclk;
+static struct clk_tegra tegra_pclk_hw = {
+	.hw = {
+		.clk = &tegra_pclk,
+	},
+	.flags = DIV_BUS,
+	.reg = 0x30,
+	.reg_shift = 0,
+	.max_rate = 120000000,
+};
+DEFINE_CLK_TEGRA(pclk, 0, &tegra_bus_ops, 0, tegra_pclk_parent_names,
+		tegra_pclk_parents, &tegra_hclk);
+
+static const char *tegra_blink_parent_names[] = {
+	"clk_32k",
+};
+
+static struct clk *tegra_blink_parents[] = {
+	&tegra_clk_32k,
+};
+
+static struct clk tegra_blink;
+static struct clk_tegra tegra_blink_hw = {
+	.hw = {
+		.clk = &tegra_blink,
+	},
+	.reg = 0x40,
+	.max_rate = 32768,
+};
+DEFINE_CLK_TEGRA(blink, 0, &tegra_blink_clk_ops, 0, tegra_blink_parent_names,
+		tegra_blink_parents, &tegra_clk_32k);
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+	"pll_m",
+	"pll_c",
+	"pll_p",
+	"pll_a_out0",
+};
+
+static struct clk *mux_pllm_pllc_pllp_plla_p[] = {
+	&tegra_pll_m,
+	&tegra_pll_c,
+	&tegra_pll_p,
+	&tegra_pll_a_out0,
+};
+
+static const char *mux_pllm_pllc_pllp_clkm[] = {
+	"pll_m",
+	"pll_c",
+	"pll_p",
+	"clk_m",
+};
+
+static struct clk *mux_pllm_pllc_pllp_clkm_p[] = {
+	&tegra_pll_m,
+	&tegra_pll_c,
+	&tegra_pll_p,
+	&tegra_clk_m,
+};
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+	"pll_p",
+	"pll_c",
+	"pll_m",
+	"clk_m",
+};
+
+static struct clk *mux_pllp_pllc_pllm_clkm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_pll_m,
+	&tegra_clk_m,
+};
+
+static const char *mux_pllaout0_audio2x_pllp_clkm[] = {
+	"pll_a_out0",
+	"audio_2x",
+	"pll_p",
+	"clk_m",
+};
+
+static struct clk *mux_pllaout0_audio2x_pllp_clkm_p[] = {
+	&tegra_pll_a_out0,
+	&tegra_audio_2x,
+	&tegra_pll_p,
+	&tegra_clk_m,
+};
+
+static const char *mux_pllp_plld_pllc_clkm[] = {
+	"pllp",
+	"pll_d_out0",
+	"pll_c",
+	"clk_m",
+};
+
+static struct clk *mux_pllp_plld_pllc_clkm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_d_out0,
+	&tegra_pll_c,
+	&tegra_clk_m,
+};
+
+static const char *mux_pllp_pllc_audio_clkm_clk32[] = {
+	"pll_p",
+	"pll_c",
+	"audio",
+	"clk_m",
+	"clk_32k",
+};
+
+static struct clk *mux_pllp_pllc_audio_clkm_clk32_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_audio,
+	&tegra_clk_m,
+	&tegra_clk_32k,
+};
+
+static const char *mux_pllp_pllc_pllm[] = {
+	"pll_p",
+	"pll_c",
+	"pll_m"
+};
+
+static struct clk *mux_pllp_pllc_pllm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_pll_m,
+};
+
+static const char *mux_clk_m[] = {
+	"clk_m",
+};
+
+static struct clk *mux_clk_m_p[] = {
+	&tegra_clk_m,
+};
+
+static const char *mux_pllp_out3[] = {
+	"pll_p_out3",
+};
+
+static struct clk *mux_pllp_out3_p[] = {
+	&tegra_pll_p_out3,
+};
+
+static const char *mux_plld[] = {
+	"pll_d",
+};
+
+static struct clk *mux_plld_p[] = {
+	&tegra_pll_d,
+};
+
+static const char *mux_clk_32k[] = {
+	"clk_32k",
+};
+
+static struct clk *mux_clk_32k_p[] = {
+	&tegra_clk_32k,
+};
+
+static const char *mux_pclk[] = {
+	"pclk",
+};
+
+static struct clk *mux_pclk_p[] = {
+	&tegra_pclk,
+};
+
+static struct clk tegra_emc;
+static struct clk_tegra tegra_emc_hw = {
+	.hw = {
+		.clk = &tegra_emc,
+	},
+	.reg = 0x19c,
+	.max_rate = 800000000,
+	.flags = MUX | DIV_U71 | PERIPH_EMC_ENB,
+	.reset = &tegra2_periph_clk_reset,
+	.u.periph = {
+		.clk_num = 57,
+	},
+};
+DEFINE_CLK_TEGRA(emc, 0, &tegra_emc_clk_ops, 0, mux_pllm_pllc_pllp_clkm,
+		mux_pllm_pllc_pllp_clkm_p, NULL);
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg,	\
+		_max, _inputs, _flags) 			\
+	static struct clk tegra_##_name;		\
+	static struct clk_tegra tegra_##_name##_hw = {	\
+		.hw = {					\
+			.clk = &tegra_##_name,		\
+		},					\
+		.lookup = {				\
+			.dev_id = _dev,			\
+			.con_id = _con,			\
+		},					\
+		.reg = _reg,				\
+		.flags = _flags,			\
+		.max_rate = _max,			\
+		.u.periph = {				\
+			.clk_num = _clk_num,		\
+		},					\
+		.reset = tegra2_periph_clk_reset,	\
+	};						\
+	static struct clk tegra_##_name = {		\
+		.name = #_name,				\
+		.ops = &tegra_periph_clk_ops,		\
+		.hw = &tegra_##_name##_hw.hw,		\
+		.parent_names = _inputs,		\
+		.parents = _inputs##_p,			\
+		.num_parents = ARRAY_SIZE(_inputs),	\
+	};
+
+PERIPH_CLK(apbdma,	"tegra-apbdma",		NULL,	34,	0,	108000000, mux_pclk,			0);
+PERIPH_CLK(rtc,		"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET);
+PERIPH_CLK(timer,	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0);
+PERIPH_CLK(i2s1,	"tegra20-i2s.0",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(i2s2,	"tegra20-i2s.1",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(spdif_out,	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(spdif_in,	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71);
+PERIPH_CLK(pwm,		"tegra-pwm",		NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71 | MUX_PWM);
+PERIPH_CLK(spi,		"spi",			NULL,	43,	0x114,	40000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(xio,		"xio",			NULL,	45,	0x120,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(twc,		"twc",			NULL,	16,	0x12c,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sbc1,	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sbc2,	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sbc3,	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sbc4,	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(ide,		"ide",			NULL,	25,	0x144,	100000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(ndflash,	"tegra_nand",		NULL,	13,	0x160,	164000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(vfir,	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sdmmc1,	"sdhci-tegra.0",	NULL,	14,	0x150,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc2,	"sdhci-tegra.1",	NULL,	9,	0x154,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc3,	"sdhci-tegra.2",	NULL,	69,	0x1bc,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc4,	"sdhci-tegra.3",	NULL,	15,	0x164,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(vcp,		"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(bsea,	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(bsev,	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(vde,		"tegra-avp",		"vde",	61,	0x1c8,	250000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(csite,	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* max rate ??? */
+/* FIXME: what is la? */
+PERIPH_CLK(la,		"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(owr,		"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(nor,		"nor",			NULL,	42,	0x1d0,	92000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(mipi,	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(i2c1,	"tegra-i2c.0",		"div-clk", 12,	0x124,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(i2c2,	"tegra-i2c.1",		"div-clk", 54,	0x198,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(i2c3,	"tegra-i2c.2",		"div-clk", 67,	0x1b8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(dvc,		"tegra-i2c.3",		"div-clk", 47,	0x128,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(uarta,	"tegra-uart.0",		NULL,	6,	0x178,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
+PERIPH_CLK(uartb,	"tegra-uart.1",		NULL,	7,	0x17c,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
+PERIPH_CLK(uartc,	"tegra-uart.2",		NULL,	55,	0x1a0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
+PERIPH_CLK(uartd,	"tegra-uart.3",		NULL,	65,	0x1c0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
+PERIPH_CLK(uarte,	"tegra-uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
+PERIPH_CLK(3d,		"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET); /* scales with voltage and process_id */
+PERIPH_CLK(2d,		"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(vi,		"tegra_camera",		"vi",	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(vi_sensor,	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET); /* scales with voltage and process_id */
+PERIPH_CLK(epp,		"epp",			NULL,	19,	0x16c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(mpe,		"mpe",			NULL,	60,	0x170,	250000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(host1x,	"host1x",		NULL,	28,	0x180,	166000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71); /* scales with voltage and process_id */
+PERIPH_CLK(cve,		"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(tvo,		"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(hdmi,	"hdmi",			NULL,	51,	0x18c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(tvdac,	"tvdac",		NULL,	53,	0x194,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(disp1,	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_plld_pllc_clkm,	MUX); /* scales with voltage and process_id */
+PERIPH_CLK(disp2,	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_plld_pllc_clkm,	MUX); /* scales with voltage and process_id */
+PERIPH_CLK(usbd,	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0); /* requires min voltage */
+PERIPH_CLK(usb2,	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0); /* requires min voltage */
+PERIPH_CLK(usb3,	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0); /* requires min voltage */
+PERIPH_CLK(dsi,		"dsi",			NULL,	48,	0,	500000000, mux_plld,			0); /* scales with voltage */
+PERIPH_CLK(csi,		"tegra_camera",		"csi",	52,	0,	72000000,  mux_pllp_out3,		0);
+PERIPH_CLK(isp,		"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0); /* same frequency as VI */
+PERIPH_CLK(csus,	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET);
+PERIPH_CLK(pex,		NULL,			"pex",  70,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET);
+PERIPH_CLK(afi,		NULL,			"afi",  72,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET);
+PERIPH_CLK(pcie_xclk,	NULL,		  "pcie_xclk",  74,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET);
+
+static struct clk *tegra_list_clks[] = {
+	&tegra_apbdma,
+	&tegra_rtc,
+	&tegra_i2s1,
+	&tegra_i2s2,
+	&tegra_spdif_out,
+	&tegra_spdif_in,
+	&tegra_pwm,
+	&tegra_spi,
+	&tegra_xio,
+	&tegra_twc,
+	&tegra_sbc1,
+	&tegra_sbc2,
+	&tegra_sbc3,
+	&tegra_sbc4,
+	&tegra_ide,
+	&tegra_ndflash,
+	&tegra_vfir,
+	&tegra_sdmmc1,
+	&tegra_sdmmc2,
+	&tegra_sdmmc3,
+	&tegra_sdmmc4,
+	&tegra_vcp,
+	&tegra_bsea,
+	&tegra_bsev,
+	&tegra_vde,
+	&tegra_csite,
+	&tegra_la,
+	&tegra_owr,
+	&tegra_nor,
+	&tegra_mipi,
+	&tegra_i2c1,
+	&tegra_i2c2,
+	&tegra_i2c3,
+	&tegra_dvc,
+	&tegra_uarta,
+	&tegra_uartb,
+	&tegra_uartc,
+	&tegra_uartd,
+	&tegra_uarte,
+	&tegra_3d,
+	&tegra_2d,
+	&tegra_vi,
+	&tegra_vi_sensor,
+	&tegra_epp,
+	&tegra_mpe,
+	&tegra_host1x,
+	&tegra_cve,
+	&tegra_tvo,
+	&tegra_hdmi,
+	&tegra_tvdac,
+	&tegra_disp1,
+	&tegra_disp2,
+	&tegra_usbd,
+	&tegra_usb2,
+	&tegra_usb3,
+	&tegra_dsi,
+	&tegra_csi,
+	&tegra_isp,
+	&tegra_csus,
+	&tegra_pex,
+	&tegra_afi,
+	&tegra_pcie_xclk,
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con)	\
+	{					\
+		.name	= _name,		\
+		.lookup	= {			\
+			.dev_id	= _dev,		\
+			.con_id	= _con,		\
+		},				\
+	}
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration.  List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+static struct clk_duplicate tegra_clk_duplicates[] = {
+	CLK_DUPLICATE("uarta",	"serial8250.0",	NULL),
+	CLK_DUPLICATE("uartb",	"serial8250.1",	NULL),
+	CLK_DUPLICATE("uartc",	"serial8250.2",	NULL),
+	CLK_DUPLICATE("uartd",	"serial8250.3",	NULL),
+	CLK_DUPLICATE("uarte",	"serial8250.4",	NULL),
+	CLK_DUPLICATE("usbd",	"utmip-pad",	NULL),
+	CLK_DUPLICATE("usbd",	"tegra-ehci.0",	NULL),
+	CLK_DUPLICATE("usbd",	"tegra-otg",	NULL),
+	CLK_DUPLICATE("hdmi",	"tegradc.0",	"hdmi"),
+	CLK_DUPLICATE("hdmi",	"tegradc.1",	"hdmi"),
+	CLK_DUPLICATE("host1x",	"tegra_grhost",	"host1x"),
+	CLK_DUPLICATE("2d",	"tegra_grhost",	"gr2d"),
+	CLK_DUPLICATE("3d",	"tegra_grhost",	"gr3d"),
+	CLK_DUPLICATE("epp",	"tegra_grhost",	"epp"),
+	CLK_DUPLICATE("mpe",	"tegra_grhost",	"mpe"),
+	CLK_DUPLICATE("cop",	"tegra-avp",	"cop"),
+	CLK_DUPLICATE("vde",	"tegra-aes",	"vde"),
+	CLK_DUPLICATE("cclk",	NULL,		"cpu"),
+	CLK_DUPLICATE("twd",	"smp_twd",	NULL),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
+};
+
+#define CLK(dev, con, ck)	\
+	{			\
+		.dev_id	= dev,	\
+		.con_id	= con,	\
+		.clk	= ck,	\
+	}
+
+static struct clk *tegra_ptr_clks[] = {
+	&tegra_clk_32k,
+	&tegra_pll_s,
+	&tegra_clk_m,
+	&tegra_pll_m,
+	&tegra_pll_m_out1,
+	&tegra_pll_c,
+	&tegra_pll_c_out1,
+	&tegra_pll_p,
+	&tegra_pll_p_out1,
+	&tegra_pll_p_out2,
+	&tegra_pll_p_out3,
+	&tegra_pll_p_out4,
+	&tegra_pll_a,
+	&tegra_pll_a_out0,
+	&tegra_pll_d,
+	&tegra_pll_d_out0,
+	&tegra_pll_u,
+	&tegra_pll_x,
+	&tegra_pll_e,
+	&tegra_cclk,
+	&tegra_clk_twd,
+	&tegra_sclk,
+	&tegra_hclk,
+	&tegra_pclk,
+	&tegra_clk_d,
+	&tegra_cdev1,
+	&tegra_cdev2,
+	&tegra_blink,
+	&tegra_cop,
+	&tegra_emc,
+};
+
+static void tegra2_init_one_clock(struct clk *c)
+{
+	struct clk_tegra *clk = to_clk_tegra(c->hw);
+	int ret;
+
+	ret = __clk_init(NULL, c);
+	if (ret)
+		pr_err("clk init failed %s\n", __clk_get_name(c));
+
+	INIT_LIST_HEAD(&clk->shared_bus_list);
+	if (!clk->lookup.dev_id && !clk->lookup.con_id)
+		clk->lookup.con_id = c->name;
+	clk->lookup.clk = c;
+	clkdev_add(&clk->lookup);
+	tegra_clk_add(c);
+}
+
+void __init tegra2_init_clocks(void)
+{
+	int i;
+	struct clk *c;
+
+	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
+		tegra2_init_one_clock(tegra_ptr_clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
+		tegra2_init_one_clock(tegra_list_clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
+		if (!c) {
+			pr_err("%s: Unknown duplicate clock %s\n", __func__,
+				tegra_clk_duplicates[i].name);
+			continue;
+		}
+
+		tegra_clk_duplicates[i].lookup.clk = c;
+		clkdev_add(&tegra_clk_duplicates[i].lookup);
+	}
+
+	init_audio_sync_clock_mux();
+	tegra20_cpu_car_ops_init();
+}
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
deleted file mode 100644
index a703844b2061..000000000000
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ /dev/null
@@ -1,2484 +0,0 @@
-/*
- * arch/arm/mach-tegra/tegra2_clocks.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "clock.h"
-#include "fuse.h"
-#include "tegra2_emc.h"
-
-#define RST_DEVICES			0x004
-#define RST_DEVICES_SET			0x300
-#define RST_DEVICES_CLR			0x304
-#define RST_DEVICES_NUM			3
-
-#define CLK_OUT_ENB			0x010
-#define CLK_OUT_ENB_SET			0x320
-#define CLK_OUT_ENB_CLR			0x324
-#define CLK_OUT_ENB_NUM			3
-
-#define CLK_MASK_ARM			0x44
-#define MISC_CLK_ENB			0x48
-
-#define OSC_CTRL			0x50
-#define OSC_CTRL_OSC_FREQ_MASK		(3<<30)
-#define OSC_CTRL_OSC_FREQ_13MHZ		(0<<30)
-#define OSC_CTRL_OSC_FREQ_19_2MHZ	(1<<30)
-#define OSC_CTRL_OSC_FREQ_12MHZ		(2<<30)
-#define OSC_CTRL_OSC_FREQ_26MHZ		(3<<30)
-#define OSC_CTRL_MASK			(0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
-
-#define OSC_FREQ_DET			0x58
-#define OSC_FREQ_DET_TRIG		(1<<31)
-
-#define OSC_FREQ_DET_STATUS		0x5C
-#define OSC_FREQ_DET_BUSY		(1<<31)
-#define OSC_FREQ_DET_CNT_MASK		0xFFFF
-
-#define PERIPH_CLK_SOURCE_I2S1		0x100
-#define PERIPH_CLK_SOURCE_EMC		0x19c
-#define PERIPH_CLK_SOURCE_OSC		0x1fc
-#define PERIPH_CLK_SOURCE_NUM \
-	((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
-
-#define PERIPH_CLK_SOURCE_MASK		(3<<30)
-#define PERIPH_CLK_SOURCE_SHIFT		30
-#define PERIPH_CLK_SOURCE_PWM_MASK	(7<<28)
-#define PERIPH_CLK_SOURCE_PWM_SHIFT	28
-#define PERIPH_CLK_SOURCE_ENABLE	(1<<28)
-#define PERIPH_CLK_SOURCE_DIVU71_MASK	0xFF
-#define PERIPH_CLK_SOURCE_DIVU16_MASK	0xFFFF
-#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
-
-#define SDMMC_CLK_INT_FB_SEL		(1 << 23)
-#define SDMMC_CLK_INT_FB_DLY_SHIFT	16
-#define SDMMC_CLK_INT_FB_DLY_MASK	(0xF << SDMMC_CLK_INT_FB_DLY_SHIFT)
-
-#define PLL_BASE			0x0
-#define PLL_BASE_BYPASS			(1<<31)
-#define PLL_BASE_ENABLE			(1<<30)
-#define PLL_BASE_REF_ENABLE		(1<<29)
-#define PLL_BASE_OVERRIDE		(1<<28)
-#define PLL_BASE_DIVP_MASK		(0x7<<20)
-#define PLL_BASE_DIVP_SHIFT		20
-#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
-#define PLL_BASE_DIVN_SHIFT		8
-#define PLL_BASE_DIVM_MASK		(0x1F)
-#define PLL_BASE_DIVM_SHIFT		0
-
-#define PLL_OUT_RATIO_MASK		(0xFF<<8)
-#define PLL_OUT_RATIO_SHIFT		8
-#define PLL_OUT_OVERRIDE		(1<<2)
-#define PLL_OUT_CLKEN			(1<<1)
-#define PLL_OUT_RESET_DISABLE		(1<<0)
-
-#define PLL_MISC(c)			(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
-
-#define PLL_MISC_DCCON_SHIFT		20
-#define PLL_MISC_CPCON_SHIFT		8
-#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
-#define PLL_MISC_LFCON_SHIFT		4
-#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
-#define PLL_MISC_VCOCON_SHIFT		0
-#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
-
-#define PLLU_BASE_POST_DIV		(1<<20)
-
-#define PLLD_MISC_CLKENABLE		(1<<30)
-#define PLLD_MISC_DIV_RST		(1<<23)
-#define PLLD_MISC_DCCON_SHIFT		12
-
-#define PLLE_MISC_READY			(1 << 15)
-
-#define PERIPH_CLK_TO_ENB_REG(c)	((c->u.periph.clk_num / 32) * 4)
-#define PERIPH_CLK_TO_ENB_SET_REG(c)	((c->u.periph.clk_num / 32) * 8)
-#define PERIPH_CLK_TO_ENB_BIT(c)	(1 << (c->u.periph.clk_num % 32))
-
-#define SUPER_CLK_MUX			0x00
-#define SUPER_STATE_SHIFT		28
-#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
-#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
-#define SUPER_SOURCE_MASK		0xF
-#define	SUPER_FIQ_SOURCE_SHIFT		12
-#define	SUPER_IRQ_SOURCE_SHIFT		8
-#define	SUPER_RUN_SOURCE_SHIFT		4
-#define	SUPER_IDLE_SOURCE_SHIFT		0
-
-#define SUPER_CLK_DIVIDER		0x04
-
-#define BUS_CLK_DISABLE			(1<<3)
-#define BUS_CLK_DIV_MASK		0x3
-
-#define PMC_CTRL			0x0
- #define PMC_CTRL_BLINK_ENB		(1 << 7)
-
-#define PMC_DPD_PADS_ORIDE		0x1c
- #define PMC_DPD_PADS_ORIDE_BLINK_ENB	(1 << 20)
-
-#define PMC_BLINK_TIMER_DATA_ON_SHIFT	0
-#define PMC_BLINK_TIMER_DATA_ON_MASK	0x7fff
-#define PMC_BLINK_TIMER_ENB		(1 << 15)
-#define PMC_BLINK_TIMER_DATA_OFF_SHIFT	16
-#define PMC_BLINK_TIMER_DATA_OFF_MASK	0xffff
-
-static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-/*
- * Some clocks share a register with other clocks.  Any clock op that
- * non-atomically modifies a register used by another clock must lock
- * clock_register_lock first.
- */
-static DEFINE_SPINLOCK(clock_register_lock);
-
-/*
- * Some peripheral clocks share an enable bit, so refcount the enable bits
- * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
- */
-static int tegra_periph_clk_enable_refcount[3 * 32];
-
-#define clk_writel(value, reg) \
-	__raw_writel(value, reg_clk_base + (reg))
-#define clk_readl(reg) \
-	__raw_readl(reg_clk_base + (reg))
-#define pmc_writel(value, reg) \
-	__raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
-	__raw_readl(reg_pmc_base + (reg))
-
-static unsigned long clk_measure_input_freq(void)
-{
-	u32 clock_autodetect;
-	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
-	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
-	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
-	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
-		return 12000000;
-	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
-		return 13000000;
-	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
-		return 19200000;
-	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
-		return 26000000;
-	} else {
-		pr_err("%s: Unexpected clock autodetect value %d", __func__, clock_autodetect);
-		BUG();
-		return 0;
-	}
-}
-
-static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate)
-{
-	s64 divider_u71 = parent_rate * 2;
-	divider_u71 += rate - 1;
-	do_div(divider_u71, rate);
-
-	if (divider_u71 - 2 < 0)
-		return 0;
-
-	if (divider_u71 - 2 > 255)
-		return -EINVAL;
-
-	return divider_u71 - 2;
-}
-
-static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
-{
-	s64 divider_u16;
-
-	divider_u16 = parent_rate;
-	divider_u16 += rate - 1;
-	do_div(divider_u16, rate);
-
-	if (divider_u16 - 1 < 0)
-		return 0;
-
-	if (divider_u16 - 1 > 255)
-		return -EINVAL;
-
-	return divider_u16 - 1;
-}
-
-/* clk_m functions */
-static unsigned long tegra2_clk_m_autodetect_rate(struct clk *c)
-{
-	u32 auto_clock_control = clk_readl(OSC_CTRL) & ~OSC_CTRL_OSC_FREQ_MASK;
-
-	c->rate = clk_measure_input_freq();
-	switch (c->rate) {
-	case 12000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
-		break;
-	case 13000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
-		break;
-	case 19200000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
-		break;
-	case 26000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
-		break;
-	default:
-		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
-		BUG();
-	}
-	clk_writel(auto_clock_control, OSC_CTRL);
-	return c->rate;
-}
-
-static void tegra2_clk_m_init(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	tegra2_clk_m_autodetect_rate(c);
-}
-
-static int tegra2_clk_m_enable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	return 0;
-}
-
-static void tegra2_clk_m_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	BUG();
-}
-
-static struct clk_ops tegra_clk_m_ops = {
-	.init		= tegra2_clk_m_init,
-	.enable		= tegra2_clk_m_enable,
-	.disable	= tegra2_clk_m_disable,
-};
-
-/* super clock functions */
-/* "super clocks" on tegra have two-stage muxes and a clock skipping
- * super divider.  We will ignore the clock skipping divider, since we
- * can't lower the voltage when using the clock skip, but we can if we
- * lower the PLL frequency.
- */
-static void tegra2_super_clk_init(struct clk *c)
-{
-	u32 val;
-	int source;
-	int shift;
-	const struct clk_mux_sel *sel;
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	c->state = ON;
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	source = (val >> shift) & SUPER_SOURCE_MASK;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->value == source)
-			break;
-	}
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
-}
-
-static int tegra2_super_clk_enable(struct clk *c)
-{
-	clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
-	return 0;
-}
-
-static void tegra2_super_clk_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	/* oops - don't disable the CPU clock! */
-	BUG();
-}
-
-static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	int shift;
-
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val &= ~(SUPER_SOURCE_MASK << shift);
-			val |= sel->value << shift;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-/*
- * Super clocks have "clock skippers" instead of dividers.  Dividing using
- * a clock skipper does not allow the voltage to be scaled down, so instead
- * adjust the rate of the parent clock.  This requires that the parent of a
- * super clock have no other children, otherwise the rate will change
- * underneath the other children.
- */
-static int tegra2_super_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	return clk_set_rate(c->parent, rate);
-}
-
-static struct clk_ops tegra_super_ops = {
-	.init			= tegra2_super_clk_init,
-	.enable			= tegra2_super_clk_enable,
-	.disable		= tegra2_super_clk_disable,
-	.set_parent		= tegra2_super_clk_set_parent,
-	.set_rate		= tegra2_super_clk_set_rate,
-};
-
-/* virtual cpu clock functions */
-/* some clocks can not be stopped (cpu, memory bus) while the SoC is running.
-   To change the frequency of these clocks, the parent pll may need to be
-   reprogrammed, so the clock must be moved off the pll, the pll reprogrammed,
-   and then the clock moved back to the pll.  To hide this sequence, a virtual
-   clock handles it.
- */
-static void tegra2_cpu_clk_init(struct clk *c)
-{
-}
-
-static int tegra2_cpu_clk_enable(struct clk *c)
-{
-	return 0;
-}
-
-static void tegra2_cpu_clk_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	/* oops - don't disable the CPU clock! */
-	BUG();
-}
-
-static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	int ret;
-	/*
-	 * Take an extra reference to the main pll so it doesn't turn
-	 * off when we move the cpu off of it
-	 */
-	clk_enable(c->u.cpu.main);
-
-	ret = clk_set_parent(c->parent, c->u.cpu.backup);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.backup->name);
-		goto out;
-	}
-
-	if (rate == clk_get_rate(c->u.cpu.backup))
-		goto out;
-
-	ret = clk_set_rate(c->u.cpu.main, rate);
-	if (ret) {
-		pr_err("Failed to change cpu pll to %lu\n", rate);
-		goto out;
-	}
-
-	ret = clk_set_parent(c->parent, c->u.cpu.main);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.main->name);
-		goto out;
-	}
-
-out:
-	clk_disable(c->u.cpu.main);
-	return ret;
-}
-
-static struct clk_ops tegra_cpu_ops = {
-	.init     = tegra2_cpu_clk_init,
-	.enable   = tegra2_cpu_clk_enable,
-	.disable  = tegra2_cpu_clk_disable,
-	.set_rate = tegra2_cpu_clk_set_rate,
-};
-
-/* virtual cop clock functions. Used to acquire the fake 'cop' clock to
- * reset the COP block (i.e. AVP) */
-static void tegra2_cop_clk_reset(struct clk *c, bool assert)
-{
-	unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
-
-	pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert");
-	clk_writel(1 << 1, reg);
-}
-
-static struct clk_ops tegra_cop_ops = {
-	.reset    = tegra2_cop_clk_reset,
-};
-
-/* bus clock functions */
-static void tegra2_bus_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
-	c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
-	c->mul = 1;
-}
-
-static int tegra2_bus_clk_enable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	val = clk_readl(c->reg);
-	val &= ~(BUS_CLK_DISABLE << c->reg_shift);
-	clk_writel(val, c->reg);
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-
-	return 0;
-}
-
-static void tegra2_bus_clk_disable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	val = clk_readl(c->reg);
-	val |= BUS_CLK_DISABLE << c->reg_shift;
-	clk_writel(val, c->reg);
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-}
-
-static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	unsigned long flags;
-	int ret = -EINVAL;
-	int i;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	val = clk_readl(c->reg);
-	for (i = 1; i <= 4; i++) {
-		if (rate == parent_rate / i) {
-			val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
-			val |= (i - 1) << c->reg_shift;
-			clk_writel(val, c->reg);
-			c->div = i;
-			c->mul = 1;
-			ret = 0;
-			break;
-		}
-	}
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-
-	return ret;
-}
-
-static struct clk_ops tegra_bus_ops = {
-	.init			= tegra2_bus_clk_init,
-	.enable			= tegra2_bus_clk_enable,
-	.disable		= tegra2_bus_clk_disable,
-	.set_rate		= tegra2_bus_clk_set_rate,
-};
-
-/* Blink output functions */
-
-static void tegra2_blink_clk_init(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_CTRL);
-	c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
-	c->mul = 1;
-	val = pmc_readl(c->reg);
-
-	if (val & PMC_BLINK_TIMER_ENB) {
-		unsigned int on_off;
-
-		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
-			PMC_BLINK_TIMER_DATA_ON_MASK;
-		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off += val;
-		/* each tick in the blink timer is 4 32KHz clocks */
-		c->div = on_off * 4;
-	} else {
-		c->div = 1;
-	}
-}
-
-static int tegra2_blink_clk_enable(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_DPD_PADS_ORIDE);
-	pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-
-	val = pmc_readl(PMC_CTRL);
-	pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
-	return 0;
-}
-
-static void tegra2_blink_clk_disable(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_CTRL);
-	pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
-	val = pmc_readl(PMC_DPD_PADS_ORIDE);
-	pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-}
-
-static int tegra2_blink_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	if (rate >= parent_rate) {
-		c->div = 1;
-		pmc_writel(0, c->reg);
-	} else {
-		unsigned int on_off;
-		u32 val;
-
-		on_off = DIV_ROUND_UP(parent_rate / 8, rate);
-		c->div = on_off * 8;
-
-		val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
-			PMC_BLINK_TIMER_DATA_ON_SHIFT;
-		on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val |= on_off;
-		val |= PMC_BLINK_TIMER_ENB;
-		pmc_writel(val, c->reg);
-	}
-
-	return 0;
-}
-
-static struct clk_ops tegra_blink_clk_ops = {
-	.init			= &tegra2_blink_clk_init,
-	.enable			= &tegra2_blink_clk_enable,
-	.disable		= &tegra2_blink_clk_disable,
-	.set_rate		= &tegra2_blink_clk_set_rate,
-};
-
-/* PLL Functions */
-static int tegra2_pll_clk_wait_for_lock(struct clk *c)
-{
-	udelay(c->u.pll.lock_delay);
-
-	return 0;
-}
-
-static void tegra2_pll_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg + PLL_BASE);
-
-	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
-
-	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
-		pr_warning("Clock %s has unknown fixed frequency\n", c->name);
-		c->mul = 1;
-		c->div = 1;
-	} else if (val & PLL_BASE_BYPASS) {
-		c->mul = 1;
-		c->div = 1;
-	} else {
-		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
-		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
-		if (c->flags & PLLU)
-			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
-		else
-			c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
-	}
-}
-
-static int tegra2_pll_clk_enable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	val = clk_readl(c->reg + PLL_BASE);
-	val &= ~PLL_BASE_BYPASS;
-	val |= PLL_BASE_ENABLE;
-	clk_writel(val, c->reg + PLL_BASE);
-
-	tegra2_pll_clk_wait_for_lock(c);
-
-	return 0;
-}
-
-static void tegra2_pll_clk_disable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	val = clk_readl(c->reg);
-	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
-	clk_writel(val, c->reg);
-}
-
-static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	unsigned long input_rate;
-	const struct clk_pll_freq_table *sel;
-
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	input_rate = clk_get_rate(c->parent);
-	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
-		if (sel->input_rate == input_rate && sel->output_rate == rate) {
-			c->mul = sel->n;
-			c->div = sel->m * sel->p;
-
-			val = clk_readl(c->reg + PLL_BASE);
-			if (c->flags & PLL_FIXED)
-				val |= PLL_BASE_OVERRIDE;
-			val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
-				 PLL_BASE_DIVM_MASK);
-			val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
-				(sel->n << PLL_BASE_DIVN_SHIFT);
-			BUG_ON(sel->p < 1 || sel->p > 2);
-			if (c->flags & PLLU) {
-				if (sel->p == 1)
-					val |= PLLU_BASE_POST_DIV;
-			} else {
-				if (sel->p == 2)
-					val |= 1 << PLL_BASE_DIVP_SHIFT;
-			}
-			clk_writel(val, c->reg + PLL_BASE);
-
-			if (c->flags & PLL_HAS_CPCON) {
-				val = clk_readl(c->reg + PLL_MISC(c));
-				val &= ~PLL_MISC_CPCON_MASK;
-				val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
-				clk_writel(val, c->reg + PLL_MISC(c));
-			}
-
-			if (c->state == ON)
-				tegra2_pll_clk_enable(c);
-
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_ops = {
-	.init			= tegra2_pll_clk_init,
-	.enable			= tegra2_pll_clk_enable,
-	.disable		= tegra2_pll_clk_disable,
-	.set_rate		= tegra2_pll_clk_set_rate,
-};
-
-static void tegra2_pllx_clk_init(struct clk *c)
-{
-	tegra2_pll_clk_init(c);
-
-	if (tegra_sku_id == 7)
-		c->max_rate = 750000000;
-}
-
-static struct clk_ops tegra_pllx_ops = {
-	.init     = tegra2_pllx_clk_init,
-	.enable   = tegra2_pll_clk_enable,
-	.disable  = tegra2_pll_clk_disable,
-	.set_rate = tegra2_pll_clk_set_rate,
-};
-
-static int tegra2_plle_clk_enable(struct clk *c)
-{
-	u32 val;
-
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	mdelay(1);
-
-	val = clk_readl(c->reg + PLL_BASE);
-	if (!(val & PLLE_MISC_READY))
-		return -EBUSY;
-
-	val = clk_readl(c->reg + PLL_BASE);
-	val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS;
-	clk_writel(val, c->reg + PLL_BASE);
-
-	return 0;
-}
-
-static struct clk_ops tegra_plle_ops = {
-	.init       = tegra2_pll_clk_init,
-	.enable     = tegra2_plle_clk_enable,
-	.set_rate   = tegra2_pll_clk_set_rate,
-};
-
-/* Clock divider ops */
-static void tegra2_pll_div_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	u32 divu71;
-	val >>= c->reg_shift;
-	c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
-	if (!(val & PLL_OUT_RESET_DISABLE))
-		c->state = OFF;
-
-	if (c->flags & DIV_U71) {
-		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
-		c->div = (divu71 + 2);
-		c->mul = 2;
-	} else if (c->flags & DIV_2) {
-		c->div = 2;
-		c->mul = 1;
-	} else {
-		c->div = 1;
-		c->mul = 1;
-	}
-}
-
-static int tegra2_pll_div_clk_enable(struct clk *c)
-{
-	u32 val;
-	u32 new_val;
-	unsigned long flags;
-
-	pr_debug("%s: %s\n", __func__, c->name);
-	if (c->flags & DIV_U71) {
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		new_val = val >> c->reg_shift;
-		new_val &= 0xFFFF;
-
-		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
-
-		val &= ~(0xFFFF << c->reg_shift);
-		val |= new_val << c->reg_shift;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-		return 0;
-	} else if (c->flags & DIV_2) {
-		BUG_ON(!(c->flags & PLLD));
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		val &= ~PLLD_MISC_DIV_RST;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static void tegra2_pll_div_clk_disable(struct clk *c)
-{
-	u32 val;
-	u32 new_val;
-	unsigned long flags;
-
-	pr_debug("%s: %s\n", __func__, c->name);
-	if (c->flags & DIV_U71) {
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		new_val = val >> c->reg_shift;
-		new_val &= 0xFFFF;
-
-		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
-
-		val &= ~(0xFFFF << c->reg_shift);
-		val |= new_val << c->reg_shift;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-	} else if (c->flags & DIV_2) {
-		BUG_ON(!(c->flags & PLLD));
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		val |= PLLD_MISC_DIV_RST;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-	}
-}
-
-static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	u32 new_val;
-	int divider_u71;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	unsigned long flags;
-
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-	if (c->flags & DIV_U71) {
-		divider_u71 = clk_div71_get_divider(parent_rate, rate);
-		if (divider_u71 >= 0) {
-			spin_lock_irqsave(&clock_register_lock, flags);
-			val = clk_readl(c->reg);
-			new_val = val >> c->reg_shift;
-			new_val &= 0xFFFF;
-			if (c->flags & DIV_U71_FIXED)
-				new_val |= PLL_OUT_OVERRIDE;
-			new_val &= ~PLL_OUT_RATIO_MASK;
-			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
-
-			val &= ~(0xFFFF << c->reg_shift);
-			val |= new_val << c->reg_shift;
-			clk_writel(val, c->reg);
-			c->div = divider_u71 + 2;
-			c->mul = 2;
-			spin_unlock_irqrestore(&clock_register_lock, flags);
-			return 0;
-		}
-	} else if (c->flags & DIV_2) {
-		if (parent_rate == rate * 2)
-			return 0;
-	}
-	return -EINVAL;
-}
-
-static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
-{
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_2) {
-		return DIV_ROUND_UP(parent_rate, 2);
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_div_ops = {
-	.init			= tegra2_pll_div_clk_init,
-	.enable			= tegra2_pll_div_clk_enable,
-	.disable		= tegra2_pll_div_clk_disable,
-	.set_rate		= tegra2_pll_div_clk_set_rate,
-	.round_rate		= tegra2_pll_div_clk_round_rate,
-};
-
-/* Periph clk ops */
-
-static void tegra2_periph_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	const struct clk_mux_sel *mux = NULL;
-	const struct clk_mux_sel *sel;
-	u32 shift;
-	u32 mask;
-
-	if (c->flags & MUX_PWM) {
-		shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
-		mask = PERIPH_CLK_SOURCE_PWM_MASK;
-	} else {
-		shift = PERIPH_CLK_SOURCE_SHIFT;
-		mask = PERIPH_CLK_SOURCE_MASK;
-	}
-
-	if (c->flags & MUX) {
-		for (sel = c->inputs; sel->input != NULL; sel++) {
-			if ((val & mask) >> shift == sel->value)
-				mux = sel;
-		}
-		BUG_ON(!mux);
-
-		c->parent = mux->input;
-	} else {
-		c->parent = c->inputs[0].input;
-	}
-
-	if (c->flags & DIV_U71) {
-		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
-		c->div = divu71 + 2;
-		c->mul = 2;
-	} else if (c->flags & DIV_U16) {
-		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
-		c->div = divu16 + 1;
-		c->mul = 1;
-	} else {
-		c->div = 1;
-		c->mul = 1;
-	}
-
-	c->state = ON;
-
-	if (!c->u.periph.clk_num)
-		return;
-
-	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
-			PERIPH_CLK_TO_ENB_BIT(c)))
-		c->state = OFF;
-
-	if (!(c->flags & PERIPH_NO_RESET))
-		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
-				PERIPH_CLK_TO_ENB_BIT(c))
-			c->state = OFF;
-}
-
-static int tegra2_periph_clk_enable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-	int refcount;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	if (!c->u.periph.clk_num)
-		return 0;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
-
-	if (refcount > 1)
-		goto out;
-
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
-	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
-		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-	if (c->flags & PERIPH_EMC_ENB) {
-		/* The EMC peripheral clock has 2 extra enable bits */
-		/* FIXME: Do they need to be disabled? */
-		val = clk_readl(c->reg);
-		val |= 0x3 << 24;
-		clk_writel(val, c->reg);
-	}
-
-out:
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-
-	return 0;
-}
-
-static void tegra2_periph_clk_disable(struct clk *c)
-{
-	unsigned long flags;
-
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	if (!c->u.periph.clk_num)
-		return;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	if (c->refcnt)
-		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
-
-	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0)
-		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-			CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-}
-
-static void tegra2_periph_clk_reset(struct clk *c, bool assert)
-{
-	unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
-
-	pr_debug("%s %s on clock %s\n", __func__,
-		 assert ? "assert" : "deassert", c->name);
-
-	BUG_ON(!c->u.periph.clk_num);
-
-	if (!(c->flags & PERIPH_NO_RESET))
-		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-			   base + PERIPH_CLK_TO_ENB_SET_REG(c));
-}
-
-static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	u32 mask, shift;
-
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
-	if (c->flags & MUX_PWM) {
-		shift = PERIPH_CLK_SOURCE_PWM_SHIFT;
-		mask = PERIPH_CLK_SOURCE_PWM_MASK;
-	} else {
-		shift = PERIPH_CLK_SOURCE_SHIFT;
-		mask = PERIPH_CLK_SOURCE_MASK;
-	}
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~mask;
-			val |= (sel->value) << shift;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(parent_rate, rate);
-		if (divider >= 0) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
-			val |= divider;
-			clk_writel(val, c->reg);
-			c->div = divider + 2;
-			c->mul = 2;
-			return 0;
-		}
-	} else if (c->flags & DIV_U16) {
-		divider = clk_div16_get_divider(parent_rate, rate);
-		if (divider >= 0) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
-			val |= divider;
-			clk_writel(val, c->reg);
-			c->div = divider + 1;
-			c->mul = 1;
-			return 0;
-		}
-	} else if (parent_rate <= rate) {
-		c->div = 1;
-		c->mul = 1;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static long tegra2_periph_clk_round_rate(struct clk *c,
-	unsigned long rate)
-{
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-
-		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_U16) {
-		divider = clk_div16_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-		return DIV_ROUND_UP(parent_rate, divider + 1);
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_periph_clk_ops = {
-	.init			= &tegra2_periph_clk_init,
-	.enable			= &tegra2_periph_clk_enable,
-	.disable		= &tegra2_periph_clk_disable,
-	.set_parent		= &tegra2_periph_clk_set_parent,
-	.set_rate		= &tegra2_periph_clk_set_rate,
-	.round_rate		= &tegra2_periph_clk_round_rate,
-	.reset			= &tegra2_periph_clk_reset,
-};
-
-/* The SDMMC controllers have extra bits in the clock source register that
- * adjust the delay between the clock and data to compenstate for delays
- * on the PCB. */
-void tegra2_sdmmc_tap_delay(struct clk *c, int delay)
-{
-	u32 reg;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	delay = clamp(delay, 0, 15);
-	reg = clk_readl(c->reg);
-	reg &= ~SDMMC_CLK_INT_FB_DLY_MASK;
-	reg |= SDMMC_CLK_INT_FB_SEL;
-	reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT;
-	clk_writel(reg, c->reg);
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-}
-
-/* External memory controller clock ops */
-static void tegra2_emc_clk_init(struct clk *c)
-{
-	tegra2_periph_clk_init(c);
-	c->max_rate = clk_get_rate_locked(c);
-}
-
-static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate)
-{
-	long emc_rate;
-	long clk_rate;
-
-	/*
-	 * The slowest entry in the EMC clock table that is at least as
-	 * fast as rate.
-	 */
-	emc_rate = tegra_emc_round_rate(rate);
-	if (emc_rate < 0)
-		return c->max_rate;
-
-	/*
-	 * The fastest rate the PLL will generate that is at most the
-	 * requested rate.
-	 */
-	clk_rate = tegra2_periph_clk_round_rate(c, emc_rate);
-
-	/*
-	 * If this fails, and emc_rate > clk_rate, it's because the maximum
-	 * rate in the EMC tables is larger than the maximum rate of the EMC
-	 * clock. The EMC clock's max rate is the rate it was running when the
-	 * kernel booted. Such a mismatch is probably due to using the wrong
-	 * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
-	 */
-	WARN_ONCE(emc_rate != clk_rate,
-		"emc_rate %ld != clk_rate %ld",
-		emc_rate, clk_rate);
-
-	return emc_rate;
-}
-
-static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	int ret;
-	/*
-	 * The Tegra2 memory controller has an interlock with the clock
-	 * block that allows memory shadowed registers to be updated,
-	 * and then transfer them to the main registers at the same
-	 * time as the clock update without glitches.
-	 */
-	ret = tegra_emc_set_rate(rate);
-	if (ret < 0)
-		return ret;
-
-	ret = tegra2_periph_clk_set_rate(c, rate);
-	udelay(1);
-
-	return ret;
-}
-
-static struct clk_ops tegra_emc_clk_ops = {
-	.init			= &tegra2_emc_clk_init,
-	.enable			= &tegra2_periph_clk_enable,
-	.disable		= &tegra2_periph_clk_disable,
-	.set_parent		= &tegra2_periph_clk_set_parent,
-	.set_rate		= &tegra2_emc_clk_set_rate,
-	.round_rate		= &tegra2_emc_clk_round_rate,
-	.reset			= &tegra2_periph_clk_reset,
-};
-
-/* Clock doubler ops */
-static void tegra2_clk_double_init(struct clk *c)
-{
-	c->mul = 2;
-	c->div = 1;
-	c->state = ON;
-
-	if (!c->u.periph.clk_num)
-		return;
-
-	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
-			PERIPH_CLK_TO_ENB_BIT(c)))
-		c->state = OFF;
-};
-
-static int tegra2_clk_double_set_rate(struct clk *c, unsigned long rate)
-{
-	if (rate != 2 * clk_get_rate(c->parent))
-		return -EINVAL;
-	c->mul = 2;
-	c->div = 1;
-	return 0;
-}
-
-static struct clk_ops tegra_clk_double_ops = {
-	.init			= &tegra2_clk_double_init,
-	.enable			= &tegra2_periph_clk_enable,
-	.disable		= &tegra2_periph_clk_disable,
-	.set_rate		= &tegra2_clk_double_set_rate,
-};
-
-/* Audio sync clock ops */
-static void tegra2_audio_sync_clk_init(struct clk *c)
-{
-	int source;
-	const struct clk_mux_sel *sel;
-	u32 val = clk_readl(c->reg);
-	c->state = (val & (1<<4)) ? OFF : ON;
-	source = val & 0xf;
-	for (sel = c->inputs; sel->input != NULL; sel++)
-		if (sel->value == source)
-			break;
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
-}
-
-static int tegra2_audio_sync_clk_enable(struct clk *c)
-{
-	clk_writel(0, c->reg);
-	return 0;
-}
-
-static void tegra2_audio_sync_clk_disable(struct clk *c)
-{
-	clk_writel(1, c->reg);
-}
-
-static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~0xf;
-			val |= sel->value;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_audio_sync_clk_ops = {
-	.init       = tegra2_audio_sync_clk_init,
-	.enable     = tegra2_audio_sync_clk_enable,
-	.disable    = tegra2_audio_sync_clk_disable,
-	.set_parent = tegra2_audio_sync_clk_set_parent,
-};
-
-/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */
-
-static void tegra2_cdev_clk_init(struct clk *c)
-{
-	/* We could un-tristate the cdev1 or cdev2 pingroup here; this is
-	 * currently done in the pinmux code. */
-	c->state = ON;
-
-	BUG_ON(!c->u.periph.clk_num);
-
-	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
-			PERIPH_CLK_TO_ENB_BIT(c)))
-		c->state = OFF;
-}
-
-static int tegra2_cdev_clk_enable(struct clk *c)
-{
-	BUG_ON(!c->u.periph.clk_num);
-
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
-	return 0;
-}
-
-static void tegra2_cdev_clk_disable(struct clk *c)
-{
-	BUG_ON(!c->u.periph.clk_num);
-
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-}
-
-static struct clk_ops tegra_cdev_clk_ops = {
-	.init			= &tegra2_cdev_clk_init,
-	.enable			= &tegra2_cdev_clk_enable,
-	.disable		= &tegra2_cdev_clk_disable,
-};
-
-/* shared bus ops */
-/*
- * Some clocks may have multiple downstream users that need to request a
- * higher clock rate.  Shared bus clocks provide a unique shared_bus_user
- * clock to each user.  The frequency of the bus is set to the highest
- * enabled shared_bus_user clock, with a minimum value set by the
- * shared bus.
- */
-static int tegra_clk_shared_bus_update(struct clk *bus)
-{
-	struct clk *c;
-	unsigned long rate = bus->min_rate;
-
-	list_for_each_entry(c, &bus->shared_bus_list, u.shared_bus_user.node)
-		if (c->u.shared_bus_user.enabled)
-			rate = max(c->u.shared_bus_user.rate, rate);
-
-	if (rate == clk_get_rate_locked(bus))
-		return 0;
-
-	return clk_set_rate_locked(bus, rate);
-};
-
-static void tegra_clk_shared_bus_init(struct clk *c)
-{
-	unsigned long flags;
-
-	c->max_rate = c->parent->max_rate;
-	c->u.shared_bus_user.rate = c->parent->max_rate;
-	c->state = OFF;
-	c->set = true;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	list_add_tail(&c->u.shared_bus_user.node,
-		&c->parent->shared_bus_list);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-}
-
-static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long flags;
-	int ret;
-	long new_rate = rate;
-
-	new_rate = clk_round_rate(c->parent, new_rate);
-	if (new_rate < 0)
-		return new_rate;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	c->u.shared_bus_user.rate = new_rate;
-	ret = tegra_clk_shared_bus_update(c->parent);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-
-	return ret;
-}
-
-static long tegra_clk_shared_bus_round_rate(struct clk *c, unsigned long rate)
-{
-	return clk_round_rate(c->parent, rate);
-}
-
-static int tegra_clk_shared_bus_enable(struct clk *c)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	c->u.shared_bus_user.enabled = true;
-	ret = tegra_clk_shared_bus_update(c->parent);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-
-	return ret;
-}
-
-static void tegra_clk_shared_bus_disable(struct clk *c)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	c->u.shared_bus_user.enabled = false;
-	ret = tegra_clk_shared_bus_update(c->parent);
-	WARN_ON_ONCE(ret);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-}
-
-static struct clk_ops tegra_clk_shared_bus_ops = {
-	.init = tegra_clk_shared_bus_init,
-	.enable = tegra_clk_shared_bus_enable,
-	.disable = tegra_clk_shared_bus_disable,
-	.set_rate = tegra_clk_shared_bus_set_rate,
-	.round_rate = tegra_clk_shared_bus_round_rate,
-};
-
-
-/* Clock definitions */
-static struct clk tegra_clk_32k = {
-	.name = "clk_32k",
-	.rate = 32768,
-	.ops  = NULL,
-	.max_rate = 32768,
-};
-
-static struct clk_pll_freq_table tegra_pll_s_freq_table[] = {
-	{32768, 12000000, 366, 1, 1, 0},
-	{32768, 13000000, 397, 1, 1, 0},
-	{32768, 19200000, 586, 1, 1, 0},
-	{32768, 26000000, 793, 1, 1, 0},
-	{0, 0, 0, 0, 0, 0},
-};
-
-static struct clk tegra_pll_s = {
-	.name      = "pll_s",
-	.flags     = PLL_ALT_MISC_REG,
-	.ops       = &tegra_pll_ops,
-	.parent    = &tegra_clk_32k,
-	.max_rate  = 26000000,
-	.reg       = 0xf0,
-	.u.pll = {
-		.input_min = 32768,
-		.input_max = 32768,
-		.cf_min    = 0, /* FIXME */
-		.cf_max    = 0, /* FIXME */
-		.vco_min   = 12000000,
-		.vco_max   = 26000000,
-		.freq_table = tegra_pll_s_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk_mux_sel tegra_clk_m_sel[] = {
-	{ .input = &tegra_clk_32k, .value = 0},
-	{ .input = &tegra_pll_s,  .value = 1},
-	{ NULL , 0},
-};
-
-static struct clk tegra_clk_m = {
-	.name      = "clk_m",
-	.flags     = ENABLE_ON_INIT,
-	.ops       = &tegra_clk_m_ops,
-	.inputs    = tegra_clk_m_sel,
-	.reg       = 0x1fc,
-	.reg_shift = 28,
-	.max_rate  = 26000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
-	{ 12000000, 600000000, 600, 12, 1, 8 },
-	{ 13000000, 600000000, 600, 13, 1, 8 },
-	{ 19200000, 600000000, 500, 16, 1, 6 },
-	{ 26000000, 600000000, 600, 26, 1, 8 },
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_c = {
-	.name      = "pll_c",
-	.flags	   = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x80,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 600000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_c_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_c_out1 = {
-	.name      = "pll_c_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_c,
-	.reg       = 0x84,
-	.reg_shift = 0,
-	.max_rate  = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
-	{ 12000000, 666000000, 666, 12, 1, 8},
-	{ 13000000, 666000000, 666, 13, 1, 8},
-	{ 19200000, 666000000, 555, 16, 1, 8},
-	{ 26000000, 666000000, 666, 26, 1, 8},
-	{ 12000000, 600000000, 600, 12, 1, 8},
-	{ 13000000, 600000000, 600, 13, 1, 8},
-	{ 19200000, 600000000, 375, 12, 1, 6},
-	{ 26000000, 600000000, 600, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_m = {
-	.name      = "pll_m",
-	.flags     = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x90,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 800000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1200000000,
-		.freq_table = tegra_pll_m_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_m_out1 = {
-	.name      = "pll_m_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_m,
-	.reg       = 0x94,
-	.reg_shift = 0,
-	.max_rate  = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
-	{ 12000000, 216000000, 432, 12, 2, 8},
-	{ 13000000, 216000000, 432, 13, 2, 8},
-	{ 19200000, 216000000, 90,   4, 2, 1},
-	{ 26000000, 216000000, 432, 26, 2, 8},
-	{ 12000000, 432000000, 432, 12, 1, 8},
-	{ 13000000, 432000000, 432, 13, 1, 8},
-	{ 19200000, 432000000, 90,   4, 1, 1},
-	{ 26000000, 432000000, 432, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_p = {
-	.name      = "pll_p",
-	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xa0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 432000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_p_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_p_out1 = {
-	.name      = "pll_p_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out2 = {
-	.name      = "pll_p_out2",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out3 = {
-	.name      = "pll_p_out3",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out4 = {
-	.name      = "pll_p_out4",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
-	{ 28800000, 56448000, 49, 25, 1, 1},
-	{ 28800000, 73728000, 64, 25, 1, 1},
-	{ 28800000, 24000000,  5,  6, 1, 1},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_a = {
-	.name      = "pll_a",
-	.flags     = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xb0,
-	.parent    = &tegra_pll_p_out1,
-	.max_rate  = 73728000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_a_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_a_out0 = {
-	.name      = "pll_a_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_a,
-	.reg       = 0xb4,
-	.reg_shift = 0,
-	.max_rate  = 73728000,
-};
-
-static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
-	{ 12000000, 216000000, 216, 12, 1, 4},
-	{ 13000000, 216000000, 216, 13, 1, 4},
-	{ 19200000, 216000000, 135, 12, 1, 3},
-	{ 26000000, 216000000, 216, 26, 1, 4},
-
-	{ 12000000, 594000000, 594, 12, 1, 8},
-	{ 13000000, 594000000, 594, 13, 1, 8},
-	{ 19200000, 594000000, 495, 16, 1, 8},
-	{ 26000000, 594000000, 594, 26, 1, 8},
-
-	{ 12000000, 1000000000, 1000, 12, 1, 12},
-	{ 13000000, 1000000000, 1000, 13, 1, 12},
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 12},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_d = {
-	.name      = "pll_d",
-	.flags     = PLL_HAS_CPCON | PLLD,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xd0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 40000000,
-		.vco_max   = 1000000000,
-		.freq_table = tegra_pll_d_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk tegra_pll_d_out0 = {
-	.name      = "pll_d_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLD,
-	.parent    = &tegra_pll_d,
-	.max_rate  = 500000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
-	{ 12000000, 480000000, 960, 12, 2, 0},
-	{ 13000000, 480000000, 960, 13, 2, 0},
-	{ 19200000, 480000000, 200, 4,  2, 0},
-	{ 26000000, 480000000, 960, 26, 2, 0},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_u = {
-	.name      = "pll_u",
-	.flags     = PLLU,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xc0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 480000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 480000000,
-		.vco_max   = 960000000,
-		.freq_table = tegra_pll_u_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
-	/* 1 GHz */
-	{ 12000000, 1000000000, 1000, 12, 1, 12},
-	{ 13000000, 1000000000, 1000, 13, 1, 12},
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 12},
-
-	/* 912 MHz */
-	{ 12000000, 912000000,  912,  12, 1, 12},
-	{ 13000000, 912000000,  912,  13, 1, 12},
-	{ 19200000, 912000000,  760,  16, 1, 8},
-	{ 26000000, 912000000,  912,  26, 1, 12},
-
-	/* 816 MHz */
-	{ 12000000, 816000000,  816,  12, 1, 12},
-	{ 13000000, 816000000,  816,  13, 1, 12},
-	{ 19200000, 816000000,  680,  16, 1, 8},
-	{ 26000000, 816000000,  816,  26, 1, 12},
-
-	/* 760 MHz */
-	{ 12000000, 760000000,  760,  12, 1, 12},
-	{ 13000000, 760000000,  760,  13, 1, 12},
-	{ 19200000, 760000000,  950,  24, 1, 8},
-	{ 26000000, 760000000,  760,  26, 1, 12},
-
-	/* 750 MHz */
-	{ 12000000, 750000000,  750,  12, 1, 12},
-	{ 13000000, 750000000,  750,  13, 1, 12},
-	{ 19200000, 750000000,  625,  16, 1, 8},
-	{ 26000000, 750000000,  750,  26, 1, 12},
-
-	/* 608 MHz */
-	{ 12000000, 608000000,  608,  12, 1, 12},
-	{ 13000000, 608000000,  608,  13, 1, 12},
-	{ 19200000, 608000000,  380,  12, 1, 8},
-	{ 26000000, 608000000,  608,  26, 1, 12},
-
-	/* 456 MHz */
-	{ 12000000, 456000000,  456,  12, 1, 12},
-	{ 13000000, 456000000,  456,  13, 1, 12},
-	{ 19200000, 456000000,  380,  16, 1, 8},
-	{ 26000000, 456000000,  456,  26, 1, 12},
-
-	/* 312 MHz */
-	{ 12000000, 312000000,  312,  12, 1, 12},
-	{ 13000000, 312000000,  312,  13, 1, 12},
-	{ 19200000, 312000000,  260,  16, 1, 8},
-	{ 26000000, 312000000,  312,  26, 1, 12},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_x = {
-	.name      = "pll_x",
-	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG,
-	.ops       = &tegra_pllx_ops,
-	.reg       = 0xe0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1200000000,
-		.freq_table = tegra_pll_x_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
-	{ 12000000, 100000000,  200,  24, 1, 0 },
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_e = {
-	.name      = "pll_e",
-	.flags	   = PLL_ALT_MISC_REG,
-	.ops       = &tegra_plle_ops,
-	.parent    = &tegra_clk_m,
-	.reg       = 0xe8,
-	.max_rate  = 100000000,
-	.u.pll = {
-		.input_min = 12000000,
-		.input_max = 12000000,
-		.freq_table = tegra_pll_e_freq_table,
-	},
-};
-
-static struct clk tegra_clk_d = {
-	.name      = "clk_d",
-	.flags     = PERIPH_NO_RESET,
-	.ops       = &tegra_clk_double_ops,
-	.reg       = 0x34,
-	.reg_shift = 12,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 52000000,
-	.u.periph  = {
-		.clk_num = 90,
-	},
-};
-
-/* dap_mclk1, belongs to the cdev1 pingroup. */
-static struct clk tegra_clk_cdev1 = {
-	.name      = "cdev1",
-	.ops       = &tegra_cdev_clk_ops,
-	.rate      = 26000000,
-	.max_rate  = 26000000,
-	.u.periph  = {
-		.clk_num = 94,
-	},
-};
-
-/* dap_mclk2, belongs to the cdev2 pingroup. */
-static struct clk tegra_clk_cdev2 = {
-	.name      = "cdev2",
-	.ops       = &tegra_cdev_clk_ops,
-	.rate      = 26000000,
-	.max_rate  = 26000000,
-	.u.periph  = {
-		.clk_num   = 93,
-	},
-};
-
-/* initialized before peripheral clocks */
-static struct clk_mux_sel mux_audio_sync_clk[8+1];
-static const struct audio_sources {
-	const char *name;
-	int value;
-} mux_audio_sync_clk_sources[] = {
-	{ .name = "spdif_in", .value = 0 },
-	{ .name = "i2s1", .value = 1 },
-	{ .name = "i2s2", .value = 2 },
-	{ .name = "pll_a_out0", .value = 4 },
-#if 0 /* FIXME: not implemented */
-	{ .name = "ac97", .value = 3 },
-	{ .name = "ext_audio_clk2", .value = 5 },
-	{ .name = "ext_audio_clk1", .value = 6 },
-	{ .name = "ext_vimclk", .value = 7 },
-#endif
-	{ NULL, 0 }
-};
-
-static struct clk tegra_clk_audio = {
-	.name      = "audio",
-	.inputs    = mux_audio_sync_clk,
-	.reg       = 0x38,
-	.max_rate  = 73728000,
-	.ops       = &tegra_audio_sync_clk_ops
-};
-
-static struct clk tegra_clk_audio_2x = {
-	.name      = "audio_2x",
-	.flags     = PERIPH_NO_RESET,
-	.max_rate  = 48000000,
-	.ops       = &tegra_clk_double_ops,
-	.reg       = 0x34,
-	.reg_shift = 8,
-	.parent    = &tegra_clk_audio,
-	.u.periph = {
-		.clk_num = 89,
-	},
-};
-
-static struct clk_lookup tegra_audio_clk_lookups[] = {
-	{ .con_id = "audio", .clk = &tegra_clk_audio },
-	{ .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
-};
-
-/* This is called after peripheral clocks are initialized, as the
- * audio_sync clock depends on some of the peripheral clocks.
- */
-
-static void init_audio_sync_clock_mux(void)
-{
-	int i;
-	struct clk_mux_sel *sel = mux_audio_sync_clk;
-	const struct audio_sources *src = mux_audio_sync_clk_sources;
-	struct clk_lookup *lookup;
-
-	for (i = 0; src->name; i++, sel++, src++) {
-		sel->input = tegra_get_clock_by_name(src->name);
-		if (!sel->input)
-			pr_err("%s: could not find clk %s\n", __func__,
-				src->name);
-		sel->value = src->value;
-	}
-
-	lookup = tegra_audio_clk_lookups;
-	for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) {
-		clk_init(lookup->clk);
-		clkdev_add(lookup);
-	}
-}
-
-static struct clk_mux_sel mux_cclk[] = {
-	{ .input = &tegra_clk_m,	.value = 0},
-	{ .input = &tegra_pll_c,	.value = 1},
-	{ .input = &tegra_clk_32k,	.value = 2},
-	{ .input = &tegra_pll_m,	.value = 3},
-	{ .input = &tegra_pll_p,	.value = 4},
-	{ .input = &tegra_pll_p_out4,	.value = 5},
-	{ .input = &tegra_pll_p_out3,	.value = 6},
-	{ .input = &tegra_clk_d,	.value = 7},
-	{ .input = &tegra_pll_x,	.value = 8},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_sclk[] = {
-	{ .input = &tegra_clk_m,	.value = 0},
-	{ .input = &tegra_pll_c_out1,	.value = 1},
-	{ .input = &tegra_pll_p_out4,	.value = 2},
-	{ .input = &tegra_pll_p_out3,	.value = 3},
-	{ .input = &tegra_pll_p_out2,	.value = 4},
-	{ .input = &tegra_clk_d,	.value = 5},
-	{ .input = &tegra_clk_32k,	.value = 6},
-	{ .input = &tegra_pll_m_out1,	.value = 7},
-	{ NULL, 0},
-};
-
-static struct clk tegra_clk_cclk = {
-	.name	= "cclk",
-	.inputs	= mux_cclk,
-	.reg	= 0x20,
-	.ops	= &tegra_super_ops,
-	.max_rate = 1000000000,
-};
-
-static struct clk tegra_clk_sclk = {
-	.name	= "sclk",
-	.inputs	= mux_sclk,
-	.reg	= 0x28,
-	.ops	= &tegra_super_ops,
-	.max_rate = 240000000,
-	.min_rate = 120000000,
-};
-
-static struct clk tegra_clk_virtual_cpu = {
-	.name      = "cpu",
-	.parent    = &tegra_clk_cclk,
-	.ops       = &tegra_cpu_ops,
-	.max_rate  = 1000000000,
-	.u.cpu = {
-		.main      = &tegra_pll_x,
-		.backup    = &tegra_pll_p,
-	},
-};
-
-static struct clk tegra_clk_cop = {
-	.name      = "cop",
-	.parent    = &tegra_clk_sclk,
-	.ops       = &tegra_cop_ops,
-	.max_rate  = 240000000,
-};
-
-static struct clk tegra_clk_hclk = {
-	.name		= "hclk",
-	.flags		= DIV_BUS,
-	.parent		= &tegra_clk_sclk,
-	.reg		= 0x30,
-	.reg_shift	= 4,
-	.ops		= &tegra_bus_ops,
-	.max_rate       = 240000000,
-};
-
-static struct clk tegra_clk_pclk = {
-	.name		= "pclk",
-	.flags		= DIV_BUS,
-	.parent		= &tegra_clk_hclk,
-	.reg		= 0x30,
-	.reg_shift	= 0,
-	.ops		= &tegra_bus_ops,
-	.max_rate       = 120000000,
-};
-
-static struct clk tegra_clk_blink = {
-	.name		= "blink",
-	.parent		= &tegra_clk_32k,
-	.reg		= 0x40,
-	.ops		= &tegra_blink_clk_ops,
-	.max_rate	= 32768,
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
-	{ .input = &tegra_pll_m, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_pll_a_out0, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
-	{ .input = &tegra_pll_m, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
-	{ .input = &tegra_pll_p, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_m, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
-	{.input = &tegra_pll_a_out0, .value = 0},
-	{.input = &tegra_clk_audio_2x, .value = 1},
-	{.input = &tegra_pll_p, .value = 2},
-	{.input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
-	{.input = &tegra_pll_p, .value = 0},
-	{.input = &tegra_pll_d_out0, .value = 1},
-	{.input = &tegra_pll_c, .value = 2},
-	{.input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_clk_audio,     .value = 2},
-	{.input = &tegra_clk_m,     .value = 3},
-	{.input = &tegra_clk_32k,   .value = 4},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_pll_m,     .value = 2},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_clk_m[] = {
-	{ .input = &tegra_clk_m, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_out3[] = {
-	{ .input = &tegra_pll_p_out3, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_plld[] = {
-	{ .input = &tegra_pll_d, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_clk_32k[] = {
-	{ .input = &tegra_clk_32k, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pclk[] = {
-	{ .input = &tegra_clk_pclk, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk tegra_clk_emc = {
-	.name = "emc",
-	.ops = &tegra_emc_clk_ops,
-	.reg = 0x19c,
-	.max_rate = 800000000,
-	.inputs = mux_pllm_pllc_pllp_clkm,
-	.flags = MUX | DIV_U71 | PERIPH_EMC_ENB,
-	.u.periph = {
-		.clk_num = 57,
-	},
-};
-
-#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id	   = _con,		\
-		},					\
-		.ops       = &tegra_periph_clk_ops,	\
-		.reg       = _reg,			\
-		.inputs    = _inputs,			\
-		.flags     = _flags,			\
-		.max_rate  = _max,			\
-		.u.periph = {				\
-			.clk_num   = _clk_num,		\
-		},					\
-	}
-
-#define SHARED_CLK(_name, _dev, _con, _parent)		\
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id    = _con,		\
-		},					\
-		.ops       = &tegra_clk_shared_bus_ops,	\
-		.parent = _parent,			\
-	}
-
-static struct clk tegra_list_clks[] = {
-	PERIPH_CLK("apbdma",	"tegra-apbdma",		NULL,	34,	0,	108000000, mux_pclk,			0),
-	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET),
-	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("i2s1",	"tegra20-i2s.0",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("i2s2",	"tegra20-i2s.1",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71),
-	PERIPH_CLK("pwm",	"tegra-pwm",		NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71 | MUX_PWM),
-	PERIPH_CLK("spi",	"spi",			NULL,	43,	0x114,	40000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("xio",	"xio",			NULL,	45,	0x120,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("twc",	"twc",			NULL,	16,	0x12c,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("ide",	"ide",			NULL,	25,	0x144,	100000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("ndflash",	"tegra_nand",		NULL,	13,	0x160,	164000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x164,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("vcp",	"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsea",	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsev",	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("vde",	"tegra-avp",		"vde",	61,	0x1c8,	250000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* max rate ??? */
-	/* FIXME: what is la? */
-	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("owr",	"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	92000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("dvc",	"tegra-i2c.3",		NULL,	47,	0x128,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("i2c1_i2c",	"tegra-i2c.0",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("i2c2_i2c",	"tegra-i2c.1",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("i2c3_i2c",	"tegra-i2c.2",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("dvc_i2c",	"tegra-i2c.3",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("uarta",	"tegra-uart.0",		NULL,	6,	0x178,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartb",	"tegra-uart.1",		NULL,	7,	0x17c,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartc",	"tegra-uart.2",		NULL,	55,	0x1a0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartd",	"tegra-uart.3",		NULL,	65,	0x1c0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uarte",	"tegra-uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
-	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("vi",	"tegra_camera",		"vi",	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */
-	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	250000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	166000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_plld_pllc_clkm,	MUX), /* scales with voltage and process_id */
-	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_plld_pllc_clkm,	MUX), /* scales with voltage and process_id */
-	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("dsi",	"dsi",			NULL,	48,	0,	500000000, mux_plld,			0), /* scales with voltage */
-	PERIPH_CLK("csi",	"tegra_camera",		"csi",	52,	0,	72000000,  mux_pllp_out3,		0),
-	PERIPH_CLK("isp",	"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0), /* same frequency as VI */
-	PERIPH_CLK("csus",	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET),
-	PERIPH_CLK("pex",       NULL,			"pex",  70,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
-	PERIPH_CLK("afi",       NULL,			"afi",  72,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
-	PERIPH_CLK("pcie_xclk", NULL,		  "pcie_xclk",  74,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
-
-	SHARED_CLK("avp.sclk",	"tegra-avp",		"sclk",	&tegra_clk_sclk),
-	SHARED_CLK("avp.emc",	"tegra-avp",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("cpu.emc",	"cpu",			"emc",	&tegra_clk_emc),
-	SHARED_CLK("disp1.emc",	"tegradc.0",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("disp2.emc",	"tegradc.1",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("hdmi.emc",	"hdmi",			"emc",	&tegra_clk_emc),
-	SHARED_CLK("host.emc",	"tegra_grhost",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("usbd.emc",	"fsl-tegra-udc",	"emc",	&tegra_clk_emc),
-	SHARED_CLK("usb1.emc",	"tegra-ehci.0",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("usb2.emc",	"tegra-ehci.1",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("usb3.emc",	"tegra-ehci.2",		"emc",	&tegra_clk_emc),
-};
-
-#define CLK_DUPLICATE(_name, _dev, _con)		\
-	{						\
-		.name	= _name,			\
-		.lookup	= {				\
-			.dev_id	= _dev,			\
-			.con_id		= _con,		\
-		},					\
-	}
-
-/* Some clocks may be used by different drivers depending on the board
- * configuration.  List those here to register them twice in the clock lookup
- * table under two names.
- */
-static struct clk_duplicate tegra_clk_duplicates[] = {
-	CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
-	CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
-	CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
-	CLK_DUPLICATE("uartd",  "serial8250.3", NULL),
-	CLK_DUPLICATE("uarte",  "serial8250.4", NULL),
-	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
-	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
-	CLK_DUPLICATE("usbd", "tegra-otg", NULL),
-	CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
-	CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
-	CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
-	CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
-	CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
-	CLK_DUPLICATE("epp", "tegra_grhost", "epp"),
-	CLK_DUPLICATE("mpe", "tegra_grhost", "mpe"),
-	CLK_DUPLICATE("cop", "tegra-avp", "cop"),
-	CLK_DUPLICATE("vde", "tegra-aes", "vde"),
-};
-
-#define CLK(dev, con, ck)	\
-	{			\
-		.dev_id = dev,	\
-		.con_id = con,	\
-		.clk = ck,	\
-	}
-
-static struct clk *tegra_ptr_clks[] = {
-	&tegra_clk_32k,
-	&tegra_pll_s,
-	&tegra_clk_m,
-	&tegra_pll_m,
-	&tegra_pll_m_out1,
-	&tegra_pll_c,
-	&tegra_pll_c_out1,
-	&tegra_pll_p,
-	&tegra_pll_p_out1,
-	&tegra_pll_p_out2,
-	&tegra_pll_p_out3,
-	&tegra_pll_p_out4,
-	&tegra_pll_a,
-	&tegra_pll_a_out0,
-	&tegra_pll_d,
-	&tegra_pll_d_out0,
-	&tegra_pll_u,
-	&tegra_pll_x,
-	&tegra_pll_e,
-	&tegra_clk_cclk,
-	&tegra_clk_sclk,
-	&tegra_clk_hclk,
-	&tegra_clk_pclk,
-	&tegra_clk_d,
-	&tegra_clk_cdev1,
-	&tegra_clk_cdev2,
-	&tegra_clk_virtual_cpu,
-	&tegra_clk_blink,
-	&tegra_clk_cop,
-	&tegra_clk_emc,
-};
-
-static void tegra2_init_one_clock(struct clk *c)
-{
-	clk_init(c);
-	INIT_LIST_HEAD(&c->shared_bus_list);
-	if (!c->lookup.dev_id && !c->lookup.con_id)
-		c->lookup.con_id = c->name;
-	c->lookup.clk = c;
-	clkdev_add(&c->lookup);
-}
-
-void __init tegra2_init_clocks(void)
-{
-	int i;
-	struct clk *c;
-
-	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
-		tegra2_init_one_clock(tegra_ptr_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
-		tegra2_init_one_clock(&tegra_list_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
-		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
-		if (!c) {
-			pr_err("%s: Unknown duplicate clock %s\n", __func__,
-				tegra_clk_duplicates[i].name);
-			continue;
-		}
-
-		tegra_clk_duplicates[i].lookup.clk = c;
-		clkdev_add(&tegra_clk_duplicates[i].lookup);
-	}
-
-	init_audio_sync_clock_mux();
-}
-
-#ifdef CONFIG_PM
-static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM +
-			   PERIPH_CLK_SOURCE_NUM + 22];
-
-void tegra_clk_suspend(void)
-{
-	unsigned long off, i;
-	u32 *ctx = clk_rst_suspend;
-
-	*ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK;
-	*ctx++ = clk_readl(tegra_pll_c.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_c.reg + PLL_MISC(&tegra_pll_c));
-	*ctx++ = clk_readl(tegra_pll_a.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_a.reg + PLL_MISC(&tegra_pll_a));
-	*ctx++ = clk_readl(tegra_pll_s.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_s.reg + PLL_MISC(&tegra_pll_s));
-	*ctx++ = clk_readl(tegra_pll_d.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_d.reg + PLL_MISC(&tegra_pll_d));
-	*ctx++ = clk_readl(tegra_pll_u.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_u.reg + PLL_MISC(&tegra_pll_u));
-
-	*ctx++ = clk_readl(tegra_pll_m_out1.reg);
-	*ctx++ = clk_readl(tegra_pll_a_out0.reg);
-	*ctx++ = clk_readl(tegra_pll_c_out1.reg);
-
-	*ctx++ = clk_readl(tegra_clk_cclk.reg);
-	*ctx++ = clk_readl(tegra_clk_cclk.reg + SUPER_CLK_DIVIDER);
-
-	*ctx++ = clk_readl(tegra_clk_sclk.reg);
-	*ctx++ = clk_readl(tegra_clk_sclk.reg + SUPER_CLK_DIVIDER);
-	*ctx++ = clk_readl(tegra_clk_pclk.reg);
-
-	*ctx++ = clk_readl(tegra_clk_audio.reg);
-
-	for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
-			off += 4) {
-		if (off == PERIPH_CLK_SOURCE_EMC)
-			continue;
-		*ctx++ = clk_readl(off);
-	}
-
-	off = RST_DEVICES;
-	for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
-		*ctx++ = clk_readl(off);
-
-	off = CLK_OUT_ENB;
-	for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
-		*ctx++ = clk_readl(off);
-
-	*ctx++ = clk_readl(MISC_CLK_ENB);
-	*ctx++ = clk_readl(CLK_MASK_ARM);
-
-	BUG_ON(ctx - clk_rst_suspend != ARRAY_SIZE(clk_rst_suspend));
-}
-
-void tegra_clk_resume(void)
-{
-	unsigned long off, i;
-	const u32 *ctx = clk_rst_suspend;
-	u32 val;
-
-	val = clk_readl(OSC_CTRL) & ~OSC_CTRL_MASK;
-	val |= *ctx++;
-	clk_writel(val, OSC_CTRL);
-
-	clk_writel(*ctx++, tegra_pll_c.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_c.reg + PLL_MISC(&tegra_pll_c));
-	clk_writel(*ctx++, tegra_pll_a.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_a.reg + PLL_MISC(&tegra_pll_a));
-	clk_writel(*ctx++, tegra_pll_s.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_s.reg + PLL_MISC(&tegra_pll_s));
-	clk_writel(*ctx++, tegra_pll_d.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_d.reg + PLL_MISC(&tegra_pll_d));
-	clk_writel(*ctx++, tegra_pll_u.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_u.reg + PLL_MISC(&tegra_pll_u));
-	udelay(1000);
-
-	clk_writel(*ctx++, tegra_pll_m_out1.reg);
-	clk_writel(*ctx++, tegra_pll_a_out0.reg);
-	clk_writel(*ctx++, tegra_pll_c_out1.reg);
-
-	clk_writel(*ctx++, tegra_clk_cclk.reg);
-	clk_writel(*ctx++, tegra_clk_cclk.reg + SUPER_CLK_DIVIDER);
-
-	clk_writel(*ctx++, tegra_clk_sclk.reg);
-	clk_writel(*ctx++, tegra_clk_sclk.reg + SUPER_CLK_DIVIDER);
-	clk_writel(*ctx++, tegra_clk_pclk.reg);
-
-	clk_writel(*ctx++, tegra_clk_audio.reg);
-
-	/* enable all clocks before configuring clock sources */
-	clk_writel(0xbffffff9ul, CLK_OUT_ENB);
-	clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4);
-	clk_writel(0x77f01bfful, CLK_OUT_ENB + 8);
-	wmb();
-
-	for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
-			off += 4) {
-		if (off == PERIPH_CLK_SOURCE_EMC)
-			continue;
-		clk_writel(*ctx++, off);
-	}
-	wmb();
-
-	off = RST_DEVICES;
-	for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
-		clk_writel(*ctx++, off);
-	wmb();
-
-	off = CLK_OUT_ENB;
-	for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
-		clk_writel(*ctx++, off);
-	wmb();
-
-	clk_writel(*ctx++, MISC_CLK_ENB);
-	clk_writel(*ctx++, CLK_MASK_ARM);
-}
-#endif
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index 6674f100e16f..5cd502c27163 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-tegra/tegra30_clocks.c
  *
- * Copyright (c) 2010-2011 NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -35,6 +35,7 @@
 
 #include "clock.h"
 #include "fuse.h"
+#include "tegra_cpu_car.h"
 
 #define USE_PLL_LOCK_BITS 0
 
@@ -299,6 +300,16 @@
 /* FIXME: recommended safety delay after lock is detected */
 #define PLL_POST_LOCK_DELAY		100
 
+/* Tegra CPU clock and reset control regs */
+#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX		0x4c
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET	0x340
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR	0x344
+#define TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR	0x34c
+#define TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS	0x470
+
+#define CPU_CLOCK(cpu)	(0x1 << (8 + cpu))
+#define CPU_RESET(cpu)	(0x1111ul << (cpu))
+
 /**
 * Structure defining the fields for USB UTMI clocks Parameters.
 */
@@ -365,30 +376,32 @@ static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE);
 static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32];
 
 #define clk_writel(value, reg) \
-	__raw_writel(value, (u32)reg_clk_base + (reg))
+	__raw_writel(value, reg_clk_base + (reg))
 #define clk_readl(reg) \
-	__raw_readl((u32)reg_clk_base + (reg))
+	__raw_readl(reg_clk_base + (reg))
 #define pmc_writel(value, reg) \
-	__raw_writel(value, (u32)reg_pmc_base + (reg))
+	__raw_writel(value, reg_pmc_base + (reg))
 #define pmc_readl(reg) \
-	__raw_readl((u32)reg_pmc_base + (reg))
+	__raw_readl(reg_pmc_base + (reg))
 #define chipid_readl() \
-	__raw_readl((u32)misc_gp_hidrev_base + MISC_GP_HIDREV)
+	__raw_readl(misc_gp_hidrev_base + MISC_GP_HIDREV)
 
 #define clk_writel_delay(value, reg)					\
 	do {								\
-		__raw_writel((value), (u32)reg_clk_base + (reg));	\
+		__raw_writel((value), reg_clk_base + (reg));	\
 		udelay(2);						\
 	} while (0)
 
-
-static inline int clk_set_div(struct clk *c, u32 n)
+static inline int clk_set_div(struct clk_tegra *c, u32 n)
 {
-	return clk_set_rate(c, (clk_get_rate(c->parent) + n-1) / n);
+	struct clk *clk = c->hw.clk;
+
+	return clk_set_rate(clk,
+			(__clk_get_rate(__clk_get_parent(clk)) + n - 1) / n);
 }
 
 static inline u32 periph_clk_to_reg(
-	struct clk *c, u32 reg_L, u32 reg_V, int offs)
+	struct clk_tegra *c, u32 reg_L, u32 reg_V, int offs)
 {
 	u32 reg = c->u.periph.clk_num / 32;
 	BUG_ON(reg >= RST_DEVICES_NUM);
@@ -470,15 +483,32 @@ static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
 	return divider_u16 - 1;
 }
 
+static unsigned long tegra30_clk_fixed_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return to_clk_tegra(hw)->fixed_rate;
+}
+
+struct clk_ops tegra30_clk_32k_ops = {
+	.recalc_rate = tegra30_clk_fixed_recalc_rate,
+};
+
 /* clk_m functions */
-static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c)
+static unsigned long tegra30_clk_m_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	if (!to_clk_tegra(hw)->fixed_rate)
+		to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq();
+	return to_clk_tegra(hw)->fixed_rate;
+}
+
+static void tegra30_clk_m_init(struct clk_hw *hw)
 {
 	u32 osc_ctrl = clk_readl(OSC_CTRL);
 	u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
 	u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
 
-	c->rate = clk_measure_input_freq();
-	switch (c->rate) {
+	switch (to_clk_tegra(hw)->fixed_rate) {
 	case 12000000:
 		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
 		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
@@ -508,46 +538,44 @@ static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c)
 		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
 		break;
 	default:
-		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
+		pr_err("%s: Unexpected clock rate %ld", __func__,
+				to_clk_tegra(hw)->fixed_rate);
 		BUG();
 	}
 	clk_writel(auto_clock_control, OSC_CTRL);
-	return c->rate;
 }
 
-static void tegra30_clk_m_init(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	tegra30_clk_m_autodetect_rate(c);
-}
+struct clk_ops tegra30_clk_m_ops = {
+	.init = tegra30_clk_m_init,
+	.recalc_rate = tegra30_clk_m_recalc_rate,
+};
 
-static int tegra30_clk_m_enable(struct clk *c)
+static unsigned long tegra30_clk_m_div_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
 {
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	return 0;
-}
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
 
-static void tegra30_clk_m_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	WARN(1, "Attempting to disable main SoC clock\n");
-}
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
 
-static struct clk_ops tegra_clk_m_ops = {
-	.init		= tegra30_clk_m_init,
-	.enable		= tegra30_clk_m_enable,
-	.disable	= tegra30_clk_m_disable,
-};
+	return rate;
+}
 
-static struct clk_ops tegra_clk_m_div_ops = {
-	.enable		= tegra30_clk_m_enable,
+struct clk_ops tegra_clk_m_div_ops = {
+	.recalc_rate = tegra30_clk_m_div_recalc_rate,
 };
 
 /* PLL reference divider functions */
-static void tegra30_pll_ref_init(struct clk *c)
+static unsigned long tegra30_pll_ref_recalc_rate(struct clk_hw *hw,
+			unsigned long parent_rate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long rate = parent_rate;
 	u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK;
-	pr_debug("%s on clock %s\n", __func__, c->name);
 
 	switch (pll_ref_div) {
 	case OSC_CTRL_PLL_REF_DIV_1:
@@ -564,13 +592,18 @@ static void tegra30_pll_ref_init(struct clk *c)
 		BUG();
 	}
 	c->mul = 1;
-	c->state = ON;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
 }
 
-static struct clk_ops tegra_pll_ref_ops = {
-	.init		= tegra30_pll_ref_init,
-	.enable		= tegra30_clk_m_enable,
-	.disable	= tegra30_clk_m_disable,
+struct clk_ops tegra_pll_ref_ops = {
+	.recalc_rate = tegra30_pll_ref_recalc_rate,
 };
 
 /* super clock functions */
@@ -581,56 +614,50 @@ static struct clk_ops tegra_pll_ref_ops = {
  * only when its parent is a fixed rate PLL, since we can't change PLL rate
  * in this case.
  */
-static void tegra30_super_clk_init(struct clk *c)
+static void tegra30_super_clk_init(struct clk_hw *hw)
 {
-	u32 val;
-	int source;
-	int shift;
-	const struct clk_mux_sel *sel;
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	c->state = ON;
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	source = (val >> shift) & SUPER_SOURCE_MASK;
-	if (c->flags & DIV_2)
-		source |= val & SUPER_LP_DIV2_BYPASS;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->value == source)
-			break;
-	}
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
+	struct clk_tegra *c = to_clk_tegra(hw);
+	struct clk_tegra *p =
+			to_clk_tegra(__clk_get_hw(__clk_get_parent(hw->clk)));
 
+	c->state = ON;
 	if (c->flags & DIV_U71) {
 		/* Init safe 7.1 divider value (does not affect PLLX path) */
 		clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT,
 			   c->reg + SUPER_CLK_DIVIDER);
 		c->mul = 2;
 		c->div = 2;
-		if (!(c->parent->flags & PLLX))
+		if (!(p->flags & PLLX))
 			c->div += SUPER_CLOCK_DIV_U71_MIN;
 	} else
 		clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
 }
 
-static int tegra30_super_clk_enable(struct clk *c)
+static u8 tegra30_super_clk_get_parent(struct clk_hw *hw)
 {
-	return 0;
-}
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val;
+	int source;
+	int shift;
 
-static void tegra30_super_clk_disable(struct clk *c)
-{
-	/* since tegra 3 has 2 CPU super clocks - low power lp-mode clock and
-	   geared up g-mode super clock - mode switch may request to disable
-	   either of them; accept request with no affect on h/w */
+	val = clk_readl(c->reg + SUPER_CLK_MUX);
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	source = (val >> shift) & SUPER_SOURCE_MASK;
+	if (c->flags & DIV_2)
+		source |= val & SUPER_LP_DIV2_BYPASS;
+
+	return source;
 }
 
-static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
+static int tegra30_super_clk_set_parent(struct clk_hw *hw, u8 index)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+	struct clk_tegra *p =
+			to_clk_tegra(__clk_get_hw(clk_get_parent(hw->clk)));
 	u32 val;
-	const struct clk_mux_sel *sel;
 	int shift;
 
 	val = clk_readl(c->reg + SUPER_CLK_MUX);
@@ -638,48 +665,36 @@ static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
 		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
 	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
 		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			/* For LP mode super-clock switch between PLLX direct
-			   and divided-by-2 outputs is allowed only when other
-			   than PLLX clock source is current parent */
-			if ((c->flags & DIV_2) && (p->flags & PLLX) &&
-			    ((sel->value ^ val) & SUPER_LP_DIV2_BYPASS)) {
-				if (c->parent->flags & PLLX)
-					return -EINVAL;
-				val ^= SUPER_LP_DIV2_BYPASS;
-				clk_writel_delay(val, c->reg);
-			}
-			val &= ~(SUPER_SOURCE_MASK << shift);
-			val |= (sel->value & SUPER_SOURCE_MASK) << shift;
-
-			/* 7.1 divider for CPU super-clock does not affect
-			   PLLX path */
-			if (c->flags & DIV_U71) {
-				u32 div = 0;
-				if (!(p->flags & PLLX)) {
-					div = clk_readl(c->reg +
-							SUPER_CLK_DIVIDER);
-					div &= SUPER_CLOCK_DIV_U71_MASK;
-					div >>= SUPER_CLOCK_DIV_U71_SHIFT;
-				}
-				c->div = div + 2;
-				c->mul = 2;
-			}
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel_delay(val, c->reg);
 
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
+	/* For LP mode super-clock switch between PLLX direct
+	   and divided-by-2 outputs is allowed only when other
+	   than PLLX clock source is current parent */
+	if ((c->flags & DIV_2) && (p->flags & PLLX) &&
+	    ((index ^ val) & SUPER_LP_DIV2_BYPASS)) {
+		if (p->flags & PLLX)
+			return -EINVAL;
+		val ^= SUPER_LP_DIV2_BYPASS;
+		clk_writel_delay(val, c->reg);
+	}
+	val &= ~(SUPER_SOURCE_MASK << shift);
+	val |= (index & SUPER_SOURCE_MASK) << shift;
 
-			clk_reparent(c, p);
-			return 0;
+	/* 7.1 divider for CPU super-clock does not affect
+	   PLLX path */
+	if (c->flags & DIV_U71) {
+		u32 div = 0;
+		if (!(p->flags & PLLX)) {
+			div = clk_readl(c->reg +
+					SUPER_CLK_DIVIDER);
+			div &= SUPER_CLOCK_DIV_U71_MASK;
+			div >>= SUPER_CLOCK_DIV_U71_SHIFT;
 		}
+		c->div = div + 2;
+		c->mul = 2;
 	}
-	return -EINVAL;
+	clk_writel_delay(val, c->reg);
+
+	return 0;
 }
 
 /*
@@ -691,10 +706,15 @@ static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
  * rate of this PLL can't be changed, and it has many other children. In
  * this case use 7.1 fractional divider to adjust the super clock rate.
  */
-static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_super_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
 {
-	if ((c->flags & DIV_U71) && (c->parent->flags & PLL_FIXED)) {
-		int div = clk_div71_get_divider(c->parent->u.pll.fixed_rate,
+	struct clk_tegra *c = to_clk_tegra(hw);
+	struct clk *parent = __clk_get_parent(hw->clk);
+	struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent));
+
+	if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) {
+		int div = clk_div71_get_divider(parent_rate,
 					rate, c->flags, ROUND_DIVIDER_DOWN);
 		div = max(div, SUPER_CLOCK_DIV_U71_MIN);
 
@@ -704,55 +724,86 @@ static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate)
 		c->mul = 2;
 		return 0;
 	}
-	return clk_set_rate(c->parent, rate);
+	return 0;
+}
+
+static unsigned long tegra30_super_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
 }
 
-static struct clk_ops tegra_super_ops = {
-	.init			= tegra30_super_clk_init,
-	.enable			= tegra30_super_clk_enable,
-	.disable		= tegra30_super_clk_disable,
-	.set_parent		= tegra30_super_clk_set_parent,
-	.set_rate		= tegra30_super_clk_set_rate,
+static long tegra30_super_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	struct clk *parent = __clk_get_parent(hw->clk);
+	struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent));
+	int mul = 2;
+	int div;
+
+	if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) {
+		div = clk_div71_get_divider(*prate,
+				rate, c->flags, ROUND_DIVIDER_DOWN);
+		div = max(div, SUPER_CLOCK_DIV_U71_MIN) + 2;
+		rate = *prate * mul;
+		rate += div - 1; /* round up */
+		do_div(rate, c->div);
+
+		return rate;
+	}
+	return *prate;
+}
+
+struct clk_ops tegra30_super_ops = {
+	.init = tegra30_super_clk_init,
+	.set_parent = tegra30_super_clk_set_parent,
+	.get_parent = tegra30_super_clk_get_parent,
+	.recalc_rate = tegra30_super_clk_recalc_rate,
+	.round_rate = tegra30_super_clk_round_rate,
+	.set_rate = tegra30_super_clk_set_rate,
 };
 
-static int tegra30_twd_clk_set_rate(struct clk *c, unsigned long rate)
+static unsigned long tegra30_twd_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
 {
-	/* The input value 'rate' is the clock rate of the CPU complex. */
-	c->rate = (rate * c->mul) / c->div;
-	return 0;
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
 }
 
-static struct clk_ops tegra30_twd_ops = {
-	.set_rate	= tegra30_twd_clk_set_rate,
+struct clk_ops tegra30_twd_ops = {
+	.recalc_rate = tegra30_twd_clk_recalc_rate,
 };
 
 /* Blink output functions */
-
-static void tegra30_blink_clk_init(struct clk *c)
+static int tegra30_blink_clk_is_enabled(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 
 	val = pmc_readl(PMC_CTRL);
 	c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
-	c->mul = 1;
-	val = pmc_readl(c->reg);
-
-	if (val & PMC_BLINK_TIMER_ENB) {
-		unsigned int on_off;
-
-		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
-			PMC_BLINK_TIMER_DATA_ON_MASK;
-		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off += val;
-		/* each tick in the blink timer is 4 32KHz clocks */
-		c->div = on_off * 4;
-	} else {
-		c->div = 1;
-	}
+	return c->state;
 }
 
-static int tegra30_blink_clk_enable(struct clk *c)
+static int tegra30_blink_clk_enable(struct clk_hw *hw)
 {
 	u32 val;
 
@@ -765,7 +816,7 @@ static int tegra30_blink_clk_enable(struct clk *c)
 	return 0;
 }
 
-static void tegra30_blink_clk_disable(struct clk *c)
+static void tegra30_blink_clk_disable(struct clk_hw *hw)
 {
 	u32 val;
 
@@ -776,9 +827,11 @@ static void tegra30_blink_clk_disable(struct clk *c)
 	pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
 }
 
-static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
 {
-	unsigned long parent_rate = clk_get_rate(c->parent);
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	if (rate >= parent_rate) {
 		c->div = 1;
 		pmc_writel(0, c->reg);
@@ -801,41 +854,77 @@ static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate)
 	return 0;
 }
 
-static struct clk_ops tegra_blink_clk_ops = {
-	.init			= &tegra30_blink_clk_init,
-	.enable			= &tegra30_blink_clk_enable,
-	.disable		= &tegra30_blink_clk_disable,
-	.set_rate		= &tegra30_blink_clk_set_rate,
-};
+static unsigned long tegra30_blink_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+	u32 val;
+	u32 mul;
+	u32 div;
+	u32 on_off;
 
-/* PLL Functions */
-static int tegra30_pll_clk_wait_for_lock(struct clk *c, u32 lock_reg,
-					 u32 lock_bit)
+	mul = 1;
+	val = pmc_readl(c->reg);
+
+	if (val & PMC_BLINK_TIMER_ENB) {
+		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
+			PMC_BLINK_TIMER_DATA_ON_MASK;
+		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+		on_off += val;
+		/* each tick in the blink timer is 4 32KHz clocks */
+		div = on_off * 4;
+	} else {
+		div = 1;
+	}
+
+	if (mul != 0 && div != 0) {
+		rate *= mul;
+		rate += div - 1; /* round up */
+		do_div(rate, div);
+	}
+	return rate;
+}
+
+static long tegra30_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
 {
-#if USE_PLL_LOCK_BITS
-	int i;
-	for (i = 0; i < c->u.pll.lock_delay; i++) {
-		if (clk_readl(lock_reg) & lock_bit) {
-			udelay(PLL_POST_LOCK_DELAY);
-			return 0;
-		}
-		udelay(2);		/* timeout = 2 * lock time */
+	int div;
+	int mul;
+	long round_rate = *prate;
+
+	mul = 1;
+
+	if (rate >= *prate) {
+		div = 1;
+	} else {
+		div = DIV_ROUND_UP(*prate / 8, rate);
+		div *= 8;
 	}
-	pr_err("Timed out waiting for lock bit on pll %s", c->name);
-	return -1;
-#endif
-	udelay(c->u.pll.lock_delay);
 
-	return 0;
+	round_rate *= mul;
+	round_rate += div - 1;
+	do_div(round_rate, div);
+
+	return round_rate;
 }
 
+struct clk_ops tegra30_blink_clk_ops = {
+	.is_enabled = tegra30_blink_clk_is_enabled,
+	.enable = tegra30_blink_clk_enable,
+	.disable = tegra30_blink_clk_disable,
+	.recalc_rate = tegra30_blink_clk_recalc_rate,
+	.round_rate = tegra30_blink_clk_round_rate,
+	.set_rate = tegra30_blink_clk_set_rate,
+};
 
-static void tegra30_utmi_param_configure(struct clk *c)
+static void tegra30_utmi_param_configure(struct clk_hw *hw)
 {
+	unsigned long main_rate =
+		__clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
 	u32 reg;
 	int i;
-	unsigned long main_rate =
-		clk_get_rate(c->parent->parent);
 
 	for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
 		if (main_rate == utmi_parameters[i].osc_frequency)
@@ -886,50 +975,52 @@ static void tegra30_utmi_param_configure(struct clk *c)
 	clk_writel(reg, UTMIP_PLL_CFG1);
 }
 
-static void tegra30_pll_clk_init(struct clk *c)
+/* PLL Functions */
+static int tegra30_pll_clk_wait_for_lock(struct clk_tegra *c, u32 lock_reg,
+					 u32 lock_bit)
+{
+	int ret = 0;
+
+#if USE_PLL_LOCK_BITS
+	int i;
+	for (i = 0; i < c->u.pll.lock_delay; i++) {
+		if (clk_readl(lock_reg) & lock_bit) {
+			udelay(PLL_POST_LOCK_DELAY);
+			return 0;
+		}
+		udelay(2);	/* timeout = 2 * lock time */
+	}
+	pr_err("Timed out waiting for lock bit on pll %s",
+					__clk_get_name(hw->clk));
+	ret = -1;
+#else
+	udelay(c->u.pll.lock_delay);
+#endif
+	return ret;
+}
+
+static int tegra30_pll_clk_is_enabled(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val = clk_readl(c->reg + PLL_BASE);
 
 	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+	return c->state;
+}
 
-	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
-		const struct clk_pll_freq_table *sel;
-		unsigned long input_rate = clk_get_rate(c->parent);
-		for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
-			if (sel->input_rate == input_rate &&
-				sel->output_rate == c->u.pll.fixed_rate) {
-				c->mul = sel->n;
-				c->div = sel->m * sel->p;
-				return;
-			}
-		}
-		pr_err("Clock %s has unknown fixed frequency\n", c->name);
-		BUG();
-	} else if (val & PLL_BASE_BYPASS) {
-		c->mul = 1;
-		c->div = 1;
-	} else {
-		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
-		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
-		if (c->flags & PLLU)
-			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
-		else
-			c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
-					PLL_BASE_DIVP_SHIFT));
-		if (c->flags & PLL_FIXED) {
-			unsigned long rate = clk_get_rate_locked(c);
-			BUG_ON(rate != c->u.pll.fixed_rate);
-		}
-	}
+static void tegra30_pll_clk_init(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
 
 	if (c->flags & PLLU)
-		tegra30_utmi_param_configure(c);
+		tegra30_utmi_param_configure(hw);
 }
 
-static int tegra30_pll_clk_enable(struct clk *c)
+static int tegra30_pll_clk_enable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
 
 #if USE_PLL_LOCK_BITS
 	val = clk_readl(c->reg + PLL_MISC(c));
@@ -952,10 +1043,11 @@ static int tegra30_pll_clk_enable(struct clk *c)
 	return 0;
 }
 
-static void tegra30_pll_clk_disable(struct clk *c)
+static void tegra30_pll_clk_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
+	pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk));
 
 	val = clk_readl(c->reg);
 	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
@@ -968,36 +1060,36 @@ static void tegra30_pll_clk_disable(struct clk *c)
 	}
 }
 
-static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val, p_div, old_base;
 	unsigned long input_rate;
 	const struct clk_pll_freq_table *sel;
 	struct clk_pll_freq_table cfg;
 
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
 	if (c->flags & PLL_FIXED) {
 		int ret = 0;
 		if (rate != c->u.pll.fixed_rate) {
 			pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
-			       __func__, c->name, c->u.pll.fixed_rate, rate);
+			       __func__, __clk_get_name(hw->clk),
+				c->u.pll.fixed_rate, rate);
 			ret = -EINVAL;
 		}
 		return ret;
 	}
 
 	if (c->flags & PLLM) {
-		if (rate != clk_get_rate_locked(c)) {
+		if (rate != __clk_get_rate(hw->clk)) {
 			pr_err("%s: Can not change memory %s rate in flight\n",
-			       __func__, c->name);
+				__func__, __clk_get_name(hw->clk));
 			return -EINVAL;
 		}
-		return 0;
 	}
 
 	p_div = 0;
-	input_rate = clk_get_rate(c->parent);
+	input_rate = parent_rate;
 
 	/* Check if the target rate is tabulated */
 	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
@@ -1055,7 +1147,7 @@ static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
 		    (p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) ||
 		    (cfg.output_rate > c->u.pll.vco_max)) {
 			pr_err("%s: Failed to set %s out-of-table rate %lu\n",
-			       __func__, c->name, rate);
+			       __func__, __clk_get_name(hw->clk), rate);
 			return -EINVAL;
 		}
 		p_div <<= PLL_BASE_DIVP_SHIFT;
@@ -1073,7 +1165,7 @@ static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
 		return 0;
 
 	if (c->state == ON) {
-		tegra30_pll_clk_disable(c);
+		tegra30_pll_clk_disable(hw);
 		val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
 	}
 	clk_writel(val, c->reg + PLL_BASE);
@@ -1095,21 +1187,149 @@ static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
 	}
 
 	if (c->state == ON)
-		tegra30_pll_clk_enable(c);
+		tegra30_pll_clk_enable(hw);
+
+	c->u.pll.fixed_rate = rate;
 
 	return 0;
 }
 
-static struct clk_ops tegra_pll_ops = {
-	.init			= tegra30_pll_clk_init,
-	.enable			= tegra30_pll_clk_enable,
-	.disable		= tegra30_pll_clk_disable,
-	.set_rate		= tegra30_pll_clk_set_rate,
+static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long input_rate = *prate;
+	unsigned long output_rate = *prate;
+	const struct clk_pll_freq_table *sel;
+	struct clk_pll_freq_table cfg;
+	int mul;
+	int div;
+	u32 p_div;
+	u32 val;
+
+	if (c->flags & PLL_FIXED)
+		return c->u.pll.fixed_rate;
+
+	if (c->flags & PLLM)
+		return __clk_get_rate(hw->clk);
+
+	p_div = 0;
+	/* Check if the target rate is tabulated */
+	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+		if (sel->input_rate == input_rate && sel->output_rate == rate) {
+			if (c->flags & PLLU) {
+				BUG_ON(sel->p < 1 || sel->p > 2);
+				if (sel->p == 1)
+					p_div = PLLU_BASE_POST_DIV;
+			} else {
+				BUG_ON(sel->p < 1);
+				for (val = sel->p; val > 1; val >>= 1)
+					p_div++;
+				p_div <<= PLL_BASE_DIVP_SHIFT;
+			}
+			break;
+		}
+	}
+
+	if (sel->input_rate == 0) {
+		unsigned long cfreq;
+		BUG_ON(c->flags & PLLU);
+		sel = &cfg;
+
+		switch (input_rate) {
+		case 12000000:
+		case 26000000:
+			cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
+			break;
+		case 13000000:
+			cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
+			break;
+		case 16800000:
+		case 19200000:
+			cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
+			break;
+		default:
+			pr_err("%s: Unexpected reference rate %lu\n",
+			       __func__, input_rate);
+			BUG();
+		}
+
+		/* Raise VCO to guarantee 0.5% accuracy */
+		for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
+		      cfg.output_rate <<= 1)
+			p_div++;
+
+		cfg.p = 0x1 << p_div;
+		cfg.m = input_rate / cfreq;
+		cfg.n = cfg.output_rate / cfreq;
+	}
+
+	mul = sel->n;
+	div = sel->m * sel->p;
+
+	output_rate *= mul;
+	output_rate += div - 1; /* round up */
+	do_div(output_rate, div);
+
+	return output_rate;
+}
+
+static unsigned long tegra30_pll_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+	u32 val = clk_readl(c->reg + PLL_BASE);
+
+	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+		const struct clk_pll_freq_table *sel;
+		for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+			if (sel->input_rate == parent_rate &&
+				sel->output_rate == c->u.pll.fixed_rate) {
+				c->mul = sel->n;
+				c->div = sel->m * sel->p;
+				break;
+			}
+		}
+		pr_err("Clock %s has unknown fixed frequency\n",
+						__clk_get_name(hw->clk));
+		BUG();
+	} else if (val & PLL_BASE_BYPASS) {
+		c->mul = 1;
+		c->div = 1;
+	} else {
+		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+		if (c->flags & PLLU)
+			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+		else
+			c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
+					PLL_BASE_DIVP_SHIFT));
+	}
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
+}
+
+struct clk_ops tegra30_pll_ops = {
+	.is_enabled = tegra30_pll_clk_is_enabled,
+	.init = tegra30_pll_clk_init,
+	.enable = tegra30_pll_clk_enable,
+	.disable = tegra30_pll_clk_disable,
+	.recalc_rate = tegra30_pll_recalc_rate,
+	.round_rate = tegra30_pll_round_rate,
+	.set_rate = tegra30_pll_clk_set_rate,
 };
 
-static int
-tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_plld_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val, mask, reg;
 
 	switch (p) {
@@ -1141,41 +1361,27 @@ tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
 	return 0;
 }
 
-static struct clk_ops tegra_plld_ops = {
-	.init			= tegra30_pll_clk_init,
-	.enable			= tegra30_pll_clk_enable,
-	.disable		= tegra30_pll_clk_disable,
-	.set_rate		= tegra30_pll_clk_set_rate,
-	.clk_cfg_ex		= tegra30_plld_clk_cfg_ex,
-};
-
-static void tegra30_plle_clk_init(struct clk *c)
+static int tegra30_plle_clk_is_enabled(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 
-	val = clk_readl(PLLE_AUX);
-	c->parent = (val & PLLE_AUX_PLLP_SEL) ?
-		tegra_get_clock_by_name("pll_p") :
-		tegra_get_clock_by_name("pll_ref");
-
 	val = clk_readl(c->reg + PLL_BASE);
 	c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
-	c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
-	c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
-	c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
+	return c->state;
 }
 
-static void tegra30_plle_clk_disable(struct clk *c)
+static void tegra30_plle_clk_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
 
 	val = clk_readl(c->reg + PLL_BASE);
 	val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
 	clk_writel(val, c->reg + PLL_BASE);
 }
 
-static void tegra30_plle_training(struct clk *c)
+static void tegra30_plle_training(struct clk_tegra *c)
 {
 	u32 val;
 
@@ -1198,12 +1404,15 @@ static void tegra30_plle_training(struct clk *c)
 	} while (!(val & PLLE_MISC_READY));
 }
 
-static int tegra30_plle_configure(struct clk *c, bool force_training)
+static int tegra30_plle_configure(struct clk_hw *hw, bool force_training)
 {
-	u32 val;
+	struct clk_tegra *c = to_clk_tegra(hw);
+	struct clk *parent = __clk_get_parent(hw->clk);
 	const struct clk_pll_freq_table *sel;
+	u32 val;
+
 	unsigned long rate = c->u.pll.fixed_rate;
-	unsigned long input_rate = clk_get_rate(c->parent);
+	unsigned long input_rate = __clk_get_rate(parent);
 
 	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
 		if (sel->input_rate == input_rate && sel->output_rate == rate)
@@ -1214,7 +1423,7 @@ static int tegra30_plle_configure(struct clk *c, bool force_training)
 		return -ENOSYS;
 
 	/* disable PLLE, clear setup fiels */
-	tegra30_plle_clk_disable(c);
+	tegra30_plle_clk_disable(hw);
 
 	val = clk_readl(c->reg + PLL_MISC(c));
 	val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
@@ -1252,52 +1461,64 @@ static int tegra30_plle_configure(struct clk *c, bool force_training)
 	return 0;
 }
 
-static int tegra30_plle_clk_enable(struct clk *c)
+static int tegra30_plle_clk_enable(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+
+	return tegra30_plle_configure(hw, !c->set);
+}
+
+static unsigned long tegra30_plle_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long parent_rate)
 {
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	return tegra30_plle_configure(c, !c->set);
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long rate = parent_rate;
+	u32 val;
+
+	val = clk_readl(c->reg + PLL_BASE);
+	c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
+	c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
+	c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+	return rate;
 }
 
-static struct clk_ops tegra_plle_ops = {
-	.init			= tegra30_plle_clk_init,
-	.enable			= tegra30_plle_clk_enable,
-	.disable		= tegra30_plle_clk_disable,
+struct clk_ops tegra30_plle_ops = {
+	.is_enabled = tegra30_plle_clk_is_enabled,
+	.enable = tegra30_plle_clk_enable,
+	.disable = tegra30_plle_clk_disable,
+	.recalc_rate = tegra30_plle_clk_recalc_rate,
 };
 
 /* Clock divider ops */
-static void tegra30_pll_div_clk_init(struct clk *c)
+static int tegra30_pll_div_clk_is_enabled(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	if (c->flags & DIV_U71) {
-		u32 divu71;
 		u32 val = clk_readl(c->reg);
 		val >>= c->reg_shift;
 		c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
 		if (!(val & PLL_OUT_RESET_DISABLE))
 			c->state = OFF;
-
-		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
-		c->div = (divu71 + 2);
-		c->mul = 2;
-	} else if (c->flags & DIV_2) {
-		c->state = ON;
-		if (c->flags & (PLLD | PLLX)) {
-			c->div = 2;
-			c->mul = 1;
-		} else
-			BUG();
 	} else {
 		c->state = ON;
-		c->div = 1;
-		c->mul = 1;
 	}
+	return c->state;
 }
 
-static int tegra30_pll_div_clk_enable(struct clk *c)
+static int tegra30_pll_div_clk_enable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	u32 new_val;
 
-	pr_debug("%s: %s\n", __func__, c->name);
+	pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
 	if (c->flags & DIV_U71) {
 		val = clk_readl(c->reg);
 		new_val = val >> c->reg_shift;
@@ -1315,12 +1536,13 @@ static int tegra30_pll_div_clk_enable(struct clk *c)
 	return -EINVAL;
 }
 
-static void tegra30_pll_div_clk_disable(struct clk *c)
+static void tegra30_pll_div_clk_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	u32 new_val;
 
-	pr_debug("%s: %s\n", __func__, c->name);
+	pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk));
 	if (c->flags & DIV_U71) {
 		val = clk_readl(c->reg);
 		new_val = val >> c->reg_shift;
@@ -1334,14 +1556,14 @@ static void tegra30_pll_div_clk_disable(struct clk *c)
 	}
 }
 
-static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	u32 new_val;
 	int divider_u71;
-	unsigned long parent_rate = clk_get_rate(c->parent);
 
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
 	if (c->flags & DIV_U71) {
 		divider_u71 = clk_div71_get_divider(
 			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
@@ -1359,19 +1581,59 @@ static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
 			clk_writel_delay(val, c->reg);
 			c->div = divider_u71 + 2;
 			c->mul = 2;
+			c->fixed_rate = rate;
 			return 0;
 		}
-	} else if (c->flags & DIV_2)
-		return clk_set_rate(c->parent, rate * 2);
+	} else if (c->flags & DIV_2) {
+		c->fixed_rate = rate;
+		return 0;
+	}
 
 	return -EINVAL;
 }
 
-static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
+static unsigned long tegra30_pll_div_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+
+	if (c->flags & DIV_U71) {
+		u32 divu71;
+		u32 val = clk_readl(c->reg);
+		val >>= c->reg_shift;
+
+		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+		c->div = (divu71 + 2);
+		c->mul = 2;
+	} else if (c->flags & DIV_2) {
+		if (c->flags & (PLLD | PLLX)) {
+			c->div = 2;
+			c->mul = 1;
+		} else
+			BUG();
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
+}
+
+static long tegra30_pll_div_clk_round_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long *prate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
 	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (prate)
+		parent_rate = *prate;
 
 	if (c->flags & DIV_U71) {
 		divider = clk_div71_get_divider(
@@ -1379,23 +1641,25 @@ static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
 		if (divider < 0)
 			return divider;
 		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_2)
-		/* no rounding - fixed DIV_2 dividers pass rate to parent PLL */
+	} else if (c->flags & DIV_2) {
+		*prate = rate * 2;
 		return rate;
+	}
 
 	return -EINVAL;
 }
 
-static struct clk_ops tegra_pll_div_ops = {
-	.init			= tegra30_pll_div_clk_init,
-	.enable			= tegra30_pll_div_clk_enable,
-	.disable		= tegra30_pll_div_clk_disable,
-	.set_rate		= tegra30_pll_div_clk_set_rate,
-	.round_rate		= tegra30_pll_div_clk_round_rate,
+struct clk_ops tegra30_pll_div_ops = {
+	.is_enabled = tegra30_pll_div_clk_is_enabled,
+	.enable = tegra30_pll_div_clk_enable,
+	.disable = tegra30_pll_div_clk_disable,
+	.set_rate = tegra30_pll_div_clk_set_rate,
+	.recalc_rate = tegra30_pll_div_clk_recalc_rate,
+	.round_rate = tegra30_pll_div_clk_round_rate,
 };
 
 /* Periph clk ops */
-static inline u32 periph_clk_source_mask(struct clk *c)
+static inline u32 periph_clk_source_mask(struct clk_tegra *c)
 {
 	if (c->flags & MUX8)
 		return 7 << 29;
@@ -1409,7 +1673,7 @@ static inline u32 periph_clk_source_mask(struct clk *c)
 		return 3 << 30;
 }
 
-static inline u32 periph_clk_source_shift(struct clk *c)
+static inline u32 periph_clk_source_shift(struct clk_tegra *c)
 {
 	if (c->flags & MUX8)
 		return 29;
@@ -1423,47 +1687,9 @@ static inline u32 periph_clk_source_shift(struct clk *c)
 		return 30;
 }
 
-static void tegra30_periph_clk_init(struct clk *c)
+static int tegra30_periph_clk_is_enabled(struct clk_hw *hw)
 {
-	u32 val = clk_readl(c->reg);
-	const struct clk_mux_sel *mux = 0;
-	const struct clk_mux_sel *sel;
-	if (c->flags & MUX) {
-		for (sel = c->inputs; sel->input != NULL; sel++) {
-			if (((val & periph_clk_source_mask(c)) >>
-			    periph_clk_source_shift(c)) == sel->value)
-				mux = sel;
-		}
-		BUG_ON(!mux);
-
-		c->parent = mux->input;
-	} else {
-		c->parent = c->inputs[0].input;
-	}
-
-	if (c->flags & DIV_U71) {
-		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
-		if ((c->flags & DIV_U71_UART) &&
-		    (!(val & PERIPH_CLK_UART_DIV_ENB))) {
-			divu71 = 0;
-		}
-		if (c->flags & DIV_U71_IDLE) {
-			val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
-				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
-			val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
-				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
-			clk_writel(val, c->reg);
-		}
-		c->div = divu71 + 2;
-		c->mul = 2;
-	} else if (c->flags & DIV_U16) {
-		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
-		c->div = divu16 + 1;
-		c->mul = 1;
-	} else {
-		c->div = 1;
-		c->mul = 1;
-	}
+	struct clk_tegra *c = to_clk_tegra(hw);
 
 	c->state = ON;
 	if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
@@ -1471,11 +1697,12 @@ static void tegra30_periph_clk_init(struct clk *c)
 	if (!(c->flags & PERIPH_NO_RESET))
 		if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c))
 			c->state = OFF;
+	return c->state;
 }
 
-static int tegra30_periph_clk_enable(struct clk *c)
+static int tegra30_periph_clk_enable(struct clk_hw *hw)
 {
-	pr_debug("%s on clock %s\n", __func__, c->name);
+	struct clk_tegra *c = to_clk_tegra(hw);
 
 	tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
 	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
@@ -1494,31 +1721,29 @@ static int tegra30_periph_clk_enable(struct clk *c)
 	return 0;
 }
 
-static void tegra30_periph_clk_disable(struct clk *c)
+static void tegra30_periph_clk_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	unsigned long val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
 
-	if (c->refcnt)
-		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+	tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0)
+		return;
 
-	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) {
-		/* If peripheral is in the APB bus then read the APB bus to
-		 * flush the write operation in apb bus. This will avoid the
-		 * peripheral access after disabling clock*/
-		if (c->flags & PERIPH_ON_APB)
-			val = chipid_readl();
+	/* If peripheral is in the APB bus then read the APB bus to
+	 * flush the write operation in apb bus. This will avoid the
+	 * peripheral access after disabling clock*/
+	if (c->flags & PERIPH_ON_APB)
+		val = chipid_readl();
 
-		clk_writel_delay(
-			PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
-	}
+	clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
 }
 
-static void tegra30_periph_clk_reset(struct clk *c, bool assert)
+void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	unsigned long val;
-	pr_debug("%s %s on clock %s\n", __func__,
-		 assert ? "assert" : "deassert", c->name);
 
 	if (!(c->flags & PERIPH_NO_RESET)) {
 		if (assert) {
@@ -1537,42 +1762,40 @@ static void tegra30_periph_clk_reset(struct clk *c, bool assert)
 	}
 }
 
-static int tegra30_periph_clk_set_parent(struct clk *c, struct clk *p)
+static int tegra30_periph_clk_set_parent(struct clk_hw *hw, u8 index)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
-	const struct clk_mux_sel *sel;
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
 
 	if (!(c->flags & MUX))
-		return (p == c->parent) ? 0 : (-EINVAL);
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~periph_clk_source_mask(c);
-			val |= (sel->value << periph_clk_source_shift(c));
-
-			if (c->refcnt)
-				clk_enable(p);
+		return (index == 0) ? 0 : (-EINVAL);
 
-			clk_writel_delay(val, c->reg);
+	val = clk_readl(c->reg);
+	val &= ~periph_clk_source_mask(c);
+	val |= (index << periph_clk_source_shift(c));
+	clk_writel_delay(val, c->reg);
+	return 0;
+}
 
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
+static u8 tegra30_periph_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+	int source  = (val & periph_clk_source_mask(c)) >>
+					periph_clk_source_shift(c);
 
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
+	if (!(c->flags & MUX))
+		return 0;
 
-	return -EINVAL;
+	return source;
 }
 
-static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
 
 	if (c->flags & DIV_U71) {
 		divider = clk_div71_get_divider(
@@ -1611,12 +1834,15 @@ static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate)
 	return -EINVAL;
 }
 
-static long tegra30_periph_clk_round_rate(struct clk *c,
-	unsigned long rate)
+static long tegra30_periph_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+	unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
 	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (prate)
+		parent_rate = *prate;
 
 	if (c->flags & DIV_U71) {
 		divider = clk_div71_get_divider(
@@ -1634,21 +1860,85 @@ static long tegra30_periph_clk_round_rate(struct clk *c,
 	return -EINVAL;
 }
 
-static struct clk_ops tegra_periph_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
+static unsigned long tegra30_periph_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
+	u32 val = clk_readl(c->reg);
+
+	if (c->flags & DIV_U71) {
+		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+		if ((c->flags & DIV_U71_UART) &&
+		    (!(val & PERIPH_CLK_UART_DIV_ENB))) {
+			divu71 = 0;
+		}
+		if (c->flags & DIV_U71_IDLE) {
+			val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
+				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+			val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
+				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+			clk_writel(val, c->reg);
+		}
+		c->div = divu71 + 2;
+		c->mul = 2;
+	} else if (c->flags & DIV_U16) {
+		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+		c->div = divu16 + 1;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+	return rate;
+}
+
+struct clk_ops tegra30_periph_clk_ops = {
+	.is_enabled = tegra30_periph_clk_is_enabled,
+	.enable = tegra30_periph_clk_enable,
+	.disable = tegra30_periph_clk_disable,
+	.set_parent = tegra30_periph_clk_set_parent,
+	.get_parent = tegra30_periph_clk_get_parent,
+	.set_rate = tegra30_periph_clk_set_rate,
+	.round_rate = tegra30_periph_clk_round_rate,
+	.recalc_rate = tegra30_periph_clk_recalc_rate,
+};
+
+static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk *d = clk_get_sys(NULL, "pll_d");
+	/* The DSIB parent selection bit is in PLLD base
+	   register - can not do direct r-m-w, must be
+	   protected by PLLD lock */
+	tegra_clk_cfg_ex(
+		d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index);
+
+	return 0;
+}
+
+struct clk_ops tegra30_dsib_clk_ops = {
+	.is_enabled = tegra30_periph_clk_is_enabled,
 	.enable			= &tegra30_periph_clk_enable,
 	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
+	.set_parent		= &tegra30_dsib_clk_set_parent,
+	.get_parent		= &tegra30_periph_clk_get_parent,
 	.set_rate		= &tegra30_periph_clk_set_rate,
 	.round_rate		= &tegra30_periph_clk_round_rate,
-	.reset			= &tegra30_periph_clk_reset,
+	.recalc_rate		= &tegra30_periph_clk_recalc_rate,
 };
 
-
 /* Periph extended clock configuration ops */
-static int
-tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_vi_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	if (p == TEGRA_CLK_VI_INP_SEL) {
 		u32 val = clk_readl(c->reg);
 		val &= ~PERIPH_CLK_VI_SEL_EX_MASK;
@@ -1660,20 +1950,11 @@ tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
 	return -EINVAL;
 }
 
-static struct clk_ops tegra_vi_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.clk_cfg_ex		= &tegra30_vi_clk_cfg_ex,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-static int
-tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_nand_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) {
 		u32 val = clk_readl(c->reg);
 		if (setting)
@@ -1686,21 +1967,11 @@ tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
 	return -EINVAL;
 }
 
-static struct clk_ops tegra_nand_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.clk_cfg_ex		= &tegra30_nand_clk_cfg_ex,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-
-static int
-tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	if (p == TEGRA_CLK_DTV_INVERT) {
 		u32 val = clk_readl(c->reg);
 		if (setting)
@@ -1713,91 +1984,27 @@ tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
 	return -EINVAL;
 }
 
-static struct clk_ops tegra_dtv_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.clk_cfg_ex		= &tegra30_dtv_clk_cfg_ex,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-static int tegra30_dsib_clk_set_parent(struct clk *c, struct clk *p)
-{
-	const struct clk_mux_sel *sel;
-	struct clk *d = tegra_get_clock_by_name("pll_d");
-
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			if (c->refcnt)
-				clk_enable(p);
-
-			/* The DSIB parent selection bit is in PLLD base
-			   register - can not do direct r-m-w, must be
-			   protected by PLLD lock */
-			tegra_clk_cfg_ex(
-				d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, sel->value);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_dsib_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_dsib_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-/* pciex clock support only reset function */
-static struct clk_ops tegra_pciex_clk_ops = {
-	.reset    = tegra30_periph_clk_reset,
-};
-
 /* Output clock ops */
 
 static DEFINE_SPINLOCK(clk_out_lock);
 
-static void tegra30_clk_out_init(struct clk *c)
+static int tegra30_clk_out_is_enabled(struct clk_hw *hw)
 {
-	const struct clk_mux_sel *mux = 0;
-	const struct clk_mux_sel *sel;
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val = pmc_readl(c->reg);
 
 	c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF;
 	c->mul = 1;
 	c->div = 1;
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (((val & periph_clk_source_mask(c)) >>
-		     periph_clk_source_shift(c)) == sel->value)
-			mux = sel;
-	}
-	BUG_ON(!mux);
-	c->parent = mux->input;
+	return c->state;
 }
 
-static int tegra30_clk_out_enable(struct clk *c)
+static int tegra30_clk_out_enable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	unsigned long flags;
 
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
 	spin_lock_irqsave(&clk_out_lock, flags);
 	val = pmc_readl(c->reg);
 	val |= (0x1 << c->u.periph.clk_num);
@@ -1807,13 +2014,12 @@ static int tegra30_clk_out_enable(struct clk *c)
 	return 0;
 }
 
-static void tegra30_clk_out_disable(struct clk *c)
+static void tegra30_clk_out_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	unsigned long flags;
 
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
 	spin_lock_irqsave(&clk_out_lock, flags);
 	val = pmc_readl(c->reg);
 	val &= ~(0x1 << c->u.periph.clk_num);
@@ -1821,59 +2027,59 @@ static void tegra30_clk_out_disable(struct clk *c)
 	spin_unlock_irqrestore(&clk_out_lock, flags);
 }
 
-static int tegra30_clk_out_set_parent(struct clk *c, struct clk *p)
+static int tegra30_clk_out_set_parent(struct clk_hw *hw, u8 index)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
 	unsigned long flags;
-	const struct clk_mux_sel *sel;
 
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			if (c->refcnt)
-				clk_enable(p);
+	spin_lock_irqsave(&clk_out_lock, flags);
+	val = pmc_readl(c->reg);
+	val &= ~periph_clk_source_mask(c);
+	val |= (index << periph_clk_source_shift(c));
+	pmc_writel(val, c->reg);
+	spin_unlock_irqrestore(&clk_out_lock, flags);
 
-			spin_lock_irqsave(&clk_out_lock, flags);
-			val = pmc_readl(c->reg);
-			val &= ~periph_clk_source_mask(c);
-			val |= (sel->value << periph_clk_source_shift(c));
-			pmc_writel(val, c->reg);
-			spin_unlock_irqrestore(&clk_out_lock, flags);
+	return 0;
+}
 
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
+static u8 tegra30_clk_out_get_parent(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = pmc_readl(c->reg);
+	int source;
 
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-	return -EINVAL;
+	source = (val & periph_clk_source_mask(c)) >>
+				periph_clk_source_shift(c);
+	return source;
 }
 
-static struct clk_ops tegra_clk_out_ops = {
-	.init			= &tegra30_clk_out_init,
-	.enable			= &tegra30_clk_out_enable,
-	.disable		= &tegra30_clk_out_disable,
-	.set_parent		= &tegra30_clk_out_set_parent,
+struct clk_ops tegra_clk_out_ops = {
+	.is_enabled = tegra30_clk_out_is_enabled,
+	.enable = tegra30_clk_out_enable,
+	.disable = tegra30_clk_out_disable,
+	.set_parent = tegra30_clk_out_set_parent,
+	.get_parent = tegra30_clk_out_get_parent,
+	.recalc_rate = tegra30_clk_fixed_recalc_rate,
 };
 
-
 /* Clock doubler ops */
-static void tegra30_clk_double_init(struct clk *c)
+static int tegra30_clk_double_is_enabled(struct clk_hw *hw)
 {
-	u32 val = clk_readl(c->reg);
-	c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
-	c->div = 1;
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	c->state = ON;
 	if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
 		c->state = OFF;
+	return c->state;
 };
 
-static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate)
+static int tegra30_clk_double_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
-	unsigned long parent_rate = clk_get_rate(c->parent);
+
 	if (rate == parent_rate) {
 		val = clk_readl(c->reg) | (0x1 << c->reg_shift);
 		clk_writel(val, c->reg);
@@ -1890,1215 +2096,200 @@ static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate)
 	return -EINVAL;
 }
 
-static struct clk_ops tegra_clk_double_ops = {
-	.init			= &tegra30_clk_double_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_rate		= &tegra30_clk_double_set_rate,
-};
+static unsigned long tegra30_clk_double_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u64 rate = parent_rate;
 
-/* Audio sync clock ops */
-static int tegra30_sync_source_set_rate(struct clk *c, unsigned long rate)
+	u32 val = clk_readl(c->reg);
+	c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
+	c->div = 1;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate *= c->mul;
+		rate += c->div - 1; /* round up */
+		do_div(rate, c->div);
+	}
+
+	return rate;
+}
+
+static long tegra30_clk_double_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
 {
-	c->rate = rate;
-	return 0;
+	unsigned long output_rate = *prate;
+
+	do_div(output_rate, 2);
+	return output_rate;
 }
 
-static struct clk_ops tegra_sync_source_ops = {
-	.set_rate		= &tegra30_sync_source_set_rate,
+struct clk_ops tegra30_clk_double_ops = {
+	.is_enabled = tegra30_clk_double_is_enabled,
+	.enable = tegra30_periph_clk_enable,
+	.disable = tegra30_periph_clk_disable,
+	.recalc_rate = tegra30_clk_double_recalc_rate,
+	.round_rate = tegra30_clk_double_round_rate,
+	.set_rate = tegra30_clk_double_set_rate,
+};
+
+/* Audio sync clock ops */
+struct clk_ops tegra_sync_source_ops = {
+	.recalc_rate = tegra30_clk_fixed_recalc_rate,
 };
 
-static void tegra30_audio_sync_clk_init(struct clk *c)
+static int tegra30_audio_sync_clk_is_enabled(struct clk_hw *hw)
 {
-	int source;
-	const struct clk_mux_sel *sel;
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val = clk_readl(c->reg);
 	c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON;
-	source = val & AUDIO_SYNC_SOURCE_MASK;
-	for (sel = c->inputs; sel->input != NULL; sel++)
-		if (sel->value == source)
-			break;
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
+	return c->state;
 }
 
-static int tegra30_audio_sync_clk_enable(struct clk *c)
+static int tegra30_audio_sync_clk_enable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val = clk_readl(c->reg);
 	clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg);
 	return 0;
 }
 
-static void tegra30_audio_sync_clk_disable(struct clk *c)
+static void tegra30_audio_sync_clk_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val = clk_readl(c->reg);
 	clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg);
 }
 
-static int tegra30_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
+static int tegra30_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val;
-	const struct clk_mux_sel *sel;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~AUDIO_SYNC_SOURCE_MASK;
-			val |= sel->value;
-
-			if (c->refcnt)
-				clk_enable(p);
 
-			clk_writel(val, c->reg);
+	val = clk_readl(c->reg);
+	val &= ~AUDIO_SYNC_SOURCE_MASK;
+	val |= index;
 
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
+	clk_writel(val, c->reg);
+	return 0;
+}
 
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
+static u8 tegra30_audio_sync_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_tegra *c = to_clk_tegra(hw);
+	u32 val = clk_readl(c->reg);
+	int source;
 
-	return -EINVAL;
+	source = val & AUDIO_SYNC_SOURCE_MASK;
+	return source;
 }
 
-static struct clk_ops tegra_audio_sync_clk_ops = {
-	.init       = tegra30_audio_sync_clk_init,
-	.enable     = tegra30_audio_sync_clk_enable,
-	.disable    = tegra30_audio_sync_clk_disable,
+struct clk_ops tegra30_audio_sync_clk_ops = {
+	.is_enabled = tegra30_audio_sync_clk_is_enabled,
+	.enable = tegra30_audio_sync_clk_enable,
+	.disable = tegra30_audio_sync_clk_disable,
 	.set_parent = tegra30_audio_sync_clk_set_parent,
+	.get_parent = tegra30_audio_sync_clk_get_parent,
+	.recalc_rate = tegra30_clk_fixed_recalc_rate,
 };
 
 /* cml0 (pcie), and cml1 (sata) clock ops */
-static void tegra30_cml_clk_init(struct clk *c)
+static int tegra30_cml_clk_is_enabled(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
 	u32 val = clk_readl(c->reg);
 	c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF;
+	return c->state;
 }
 
-static int tegra30_cml_clk_enable(struct clk *c)
+static int tegra30_cml_clk_enable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	u32 val = clk_readl(c->reg);
 	val |= (0x1 << c->u.periph.clk_num);
 	clk_writel(val, c->reg);
+
 	return 0;
 }
 
-static void tegra30_cml_clk_disable(struct clk *c)
+static void tegra30_cml_clk_disable(struct clk_hw *hw)
 {
+	struct clk_tegra *c = to_clk_tegra(hw);
+
 	u32 val = clk_readl(c->reg);
 	val &= ~(0x1 << c->u.periph.clk_num);
 	clk_writel(val, c->reg);
 }
 
-static struct clk_ops tegra_cml_clk_ops = {
-	.init			= &tegra30_cml_clk_init,
-	.enable			= &tegra30_cml_clk_enable,
-	.disable		= &tegra30_cml_clk_disable,
-};
-
-/* Clock definitions */
-static struct clk tegra_clk_32k = {
-	.name = "clk_32k",
-	.rate = 32768,
-	.ops  = NULL,
-	.max_rate = 32768,
-};
-
-static struct clk tegra_clk_m = {
-	.name      = "clk_m",
-	.flags     = ENABLE_ON_INIT,
-	.ops       = &tegra_clk_m_ops,
-	.reg       = 0x1fc,
-	.reg_shift = 28,
-	.max_rate  = 48000000,
-};
-
-static struct clk tegra_clk_m_div2 = {
-	.name      = "clk_m_div2",
-	.ops       = &tegra_clk_m_div_ops,
-	.parent    = &tegra_clk_m,
-	.mul       = 1,
-	.div       = 2,
-	.state     = ON,
-	.max_rate  = 24000000,
-};
-
-static struct clk tegra_clk_m_div4 = {
-	.name      = "clk_m_div4",
-	.ops       = &tegra_clk_m_div_ops,
-	.parent    = &tegra_clk_m,
-	.mul       = 1,
-	.div       = 4,
-	.state     = ON,
-	.max_rate  = 12000000,
-};
-
-static struct clk tegra_pll_ref = {
-	.name      = "pll_ref",
-	.flags     = ENABLE_ON_INIT,
-	.ops       = &tegra_pll_ref_ops,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 26000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
-	{ 12000000, 1040000000, 520,  6, 1, 8},
-	{ 13000000, 1040000000, 480,  6, 1, 8},
-	{ 16800000, 1040000000, 495,  8, 1, 8},		/* actual: 1039.5 MHz */
-	{ 19200000, 1040000000, 325,  6, 1, 6},
-	{ 26000000, 1040000000, 520, 13, 1, 8},
-
-	{ 12000000, 832000000, 416,  6, 1, 8},
-	{ 13000000, 832000000, 832, 13, 1, 8},
-	{ 16800000, 832000000, 396,  8, 1, 8},		/* actual: 831.6 MHz */
-	{ 19200000, 832000000, 260,  6, 1, 8},
-	{ 26000000, 832000000, 416, 13, 1, 8},
-
-	{ 12000000, 624000000, 624, 12, 1, 8},
-	{ 13000000, 624000000, 624, 13, 1, 8},
-	{ 16800000, 600000000, 520, 14, 1, 8},
-	{ 19200000, 624000000, 520, 16, 1, 8},
-	{ 26000000, 624000000, 624, 26, 1, 8},
-
-	{ 12000000, 600000000, 600, 12, 1, 8},
-	{ 13000000, 600000000, 600, 13, 1, 8},
-	{ 16800000, 600000000, 500, 14, 1, 8},
-	{ 19200000, 600000000, 375, 12, 1, 6},
-	{ 26000000, 600000000, 600, 26, 1, 8},
-
-	{ 12000000, 520000000, 520, 12, 1, 8},
-	{ 13000000, 520000000, 520, 13, 1, 8},
-	{ 16800000, 520000000, 495, 16, 1, 8},		/* actual: 519.75 MHz */
-	{ 19200000, 520000000, 325, 12, 1, 6},
-	{ 26000000, 520000000, 520, 26, 1, 8},
-
-	{ 12000000, 416000000, 416, 12, 1, 8},
-	{ 13000000, 416000000, 416, 13, 1, 8},
-	{ 16800000, 416000000, 396, 16, 1, 8},		/* actual: 415.8 MHz */
-	{ 19200000, 416000000, 260, 12, 1, 6},
-	{ 26000000, 416000000, 416, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_c = {
-	.name      = "pll_c",
-	.flags	   = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x80,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1400000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_c_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_c_out1 = {
-	.name      = "pll_c_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_c,
-	.reg       = 0x84,
-	.reg_shift = 0,
-	.max_rate  = 700000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
-	{ 12000000, 666000000, 666, 12, 1, 8},
-	{ 13000000, 666000000, 666, 13, 1, 8},
-	{ 16800000, 666000000, 555, 14, 1, 8},
-	{ 19200000, 666000000, 555, 16, 1, 8},
-	{ 26000000, 666000000, 666, 26, 1, 8},
-	{ 12000000, 600000000, 600, 12, 1, 8},
-	{ 13000000, 600000000, 600, 13, 1, 8},
-	{ 16800000, 600000000, 500, 14, 1, 8},
-	{ 19200000, 600000000, 375, 12, 1, 6},
-	{ 26000000, 600000000, 600, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_m = {
-	.name      = "pll_m",
-	.flags     = PLL_HAS_CPCON | PLLM,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x90,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 800000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1200000000,
-		.freq_table = tegra_pll_m_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_m_out1 = {
-	.name      = "pll_m_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_m,
-	.reg       = 0x94,
-	.reg_shift = 0,
-	.max_rate  = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
-	{ 12000000, 216000000, 432, 12, 2, 8},
-	{ 13000000, 216000000, 432, 13, 2, 8},
-	{ 16800000, 216000000, 360, 14, 2, 8},
-	{ 19200000, 216000000, 360, 16, 2, 8},
-	{ 26000000, 216000000, 432, 26, 2, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_p = {
-	.name      = "pll_p",
-	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xa0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 432000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_p_freq_table,
-		.lock_delay = 300,
-		.fixed_rate = 408000000,
-	},
-};
-
-static struct clk tegra_pll_p_out1 = {
-	.name      = "pll_p_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out2 = {
-	.name      = "pll_p_out2",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out3 = {
-	.name      = "pll_p_out3",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out4 = {
-	.name      = "pll_p_out4",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
-	{ 9600000, 564480000, 294, 5, 1, 4},
-	{ 9600000, 552960000, 288, 5, 1, 4},
-	{ 9600000, 24000000,  5,   2, 1, 1},
-
-	{ 28800000, 56448000, 49, 25, 1, 1},
-	{ 28800000, 73728000, 64, 25, 1, 1},
-	{ 28800000, 24000000,  5,  6, 1, 1},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_a = {
-	.name      = "pll_a",
-	.flags     = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xb0,
-	.parent    = &tegra_pll_p_out1,
-	.max_rate  = 700000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_a_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_a_out0 = {
-	.name      = "pll_a_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_a,
-	.reg       = 0xb4,
-	.reg_shift = 0,
-	.max_rate  = 100000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
-	{ 12000000, 216000000, 216, 12, 1, 4},
-	{ 13000000, 216000000, 216, 13, 1, 4},
-	{ 16800000, 216000000, 180, 14, 1, 4},
-	{ 19200000, 216000000, 180, 16, 1, 4},
-	{ 26000000, 216000000, 216, 26, 1, 4},
-
-	{ 12000000, 594000000, 594, 12, 1, 8},
-	{ 13000000, 594000000, 594, 13, 1, 8},
-	{ 16800000, 594000000, 495, 14, 1, 8},
-	{ 19200000, 594000000, 495, 16, 1, 8},
-	{ 26000000, 594000000, 594, 26, 1, 8},
-
-	{ 12000000, 1000000000, 1000, 12, 1, 12},
-	{ 13000000, 1000000000, 1000, 13, 1, 12},
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 12},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_d = {
-	.name      = "pll_d",
-	.flags     = PLL_HAS_CPCON | PLLD,
-	.ops       = &tegra_plld_ops,
-	.reg       = 0xd0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 40000000,
-		.vco_max   = 1000000000,
-		.freq_table = tegra_pll_d_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk tegra_pll_d_out0 = {
-	.name      = "pll_d_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLD,
-	.parent    = &tegra_pll_d,
-	.max_rate  = 500000000,
-};
-
-static struct clk tegra_pll_d2 = {
-	.name      = "pll_d2",
-	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD,
-	.ops       = &tegra_plld_ops,
-	.reg       = 0x4b8,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 40000000,
-		.vco_max   = 1000000000,
-		.freq_table = tegra_pll_d_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk tegra_pll_d2_out0 = {
-	.name      = "pll_d2_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLD,
-	.parent    = &tegra_pll_d2,
-	.max_rate  = 500000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
-	{ 12000000, 480000000, 960, 12, 2, 12},
-	{ 13000000, 480000000, 960, 13, 2, 12},
-	{ 16800000, 480000000, 400, 7,  2, 5},
-	{ 19200000, 480000000, 200, 4,  2, 3},
-	{ 26000000, 480000000, 960, 26, 2, 12},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_u = {
-	.name      = "pll_u",
-	.flags     = PLL_HAS_CPCON | PLLU,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xc0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 480000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 480000000,
-		.vco_max   = 960000000,
-		.freq_table = tegra_pll_u_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
-	/* 1.7 GHz */
-	{ 12000000, 1700000000, 850,  6,  1, 8},
-	{ 13000000, 1700000000, 915,  7,  1, 8},	/* actual: 1699.2 MHz */
-	{ 16800000, 1700000000, 708,  7,  1, 8},	/* actual: 1699.2 MHz */
-	{ 19200000, 1700000000, 885,  10, 1, 8},	/* actual: 1699.2 MHz */
-	{ 26000000, 1700000000, 850,  13, 1, 8},
-
-	/* 1.6 GHz */
-	{ 12000000, 1600000000, 800,  6,  1, 8},
-	{ 13000000, 1600000000, 738,  6,  1, 8},	/* actual: 1599.0 MHz */
-	{ 16800000, 1600000000, 857,  9,  1, 8},	/* actual: 1599.7 MHz */
-	{ 19200000, 1600000000, 500,  6,  1, 8},
-	{ 26000000, 1600000000, 800,  13, 1, 8},
-
-	/* 1.5 GHz */
-	{ 12000000, 1500000000, 750,  6,  1, 8},
-	{ 13000000, 1500000000, 923,  8,  1, 8},	/* actual: 1499.8 MHz */
-	{ 16800000, 1500000000, 625,  7,  1, 8},
-	{ 19200000, 1500000000, 625,  8,  1, 8},
-	{ 26000000, 1500000000, 750,  13, 1, 8},
-
-	/* 1.4 GHz */
-	{ 12000000, 1400000000, 700,  6,  1, 8},
-	{ 13000000, 1400000000, 969,  9,  1, 8},	/* actual: 1399.7 MHz */
-	{ 16800000, 1400000000, 1000, 12, 1, 8},
-	{ 19200000, 1400000000, 875,  12, 1, 8},
-	{ 26000000, 1400000000, 700,  13, 1, 8},
-
-	/* 1.3 GHz */
-	{ 12000000, 1300000000, 975,  9,  1, 8},
-	{ 13000000, 1300000000, 1000, 10, 1, 8},
-	{ 16800000, 1300000000, 928,  12, 1, 8},	/* actual: 1299.2 MHz */
-	{ 19200000, 1300000000, 812,  12, 1, 8},	/* actual: 1299.2 MHz */
-	{ 26000000, 1300000000, 650,  13, 1, 8},
-
-	/* 1.2 GHz */
-	{ 12000000, 1200000000, 1000, 10, 1, 8},
-	{ 13000000, 1200000000, 923,  10, 1, 8},	/* actual: 1199.9 MHz */
-	{ 16800000, 1200000000, 1000, 14, 1, 8},
-	{ 19200000, 1200000000, 1000, 16, 1, 8},
-	{ 26000000, 1200000000, 600,  13, 1, 8},
-
-	/* 1.1 GHz */
-	{ 12000000, 1100000000, 825,  9,  1, 8},
-	{ 13000000, 1100000000, 846,  10, 1, 8},	/* actual: 1099.8 MHz */
-	{ 16800000, 1100000000, 982,  15, 1, 8},	/* actual: 1099.8 MHz */
-	{ 19200000, 1100000000, 859,  15, 1, 8},	/* actual: 1099.5 MHz */
-	{ 26000000, 1100000000, 550,  13, 1, 8},
-
-	/* 1 GHz */
-	{ 12000000, 1000000000, 1000, 12, 1, 8},
-	{ 13000000, 1000000000, 1000, 13, 1, 8},
-	{ 16800000, 1000000000, 833,  14, 1, 8},	/* actual: 999.6 MHz */
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 8},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_x = {
-	.name      = "pll_x",
-	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xe0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1700000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1700000000,
-		.freq_table = tegra_pll_x_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_x_out0 = {
-	.name      = "pll_x_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLX,
-	.parent    = &tegra_pll_x,
-	.max_rate  = 850000000,
-};
-
-
-static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
-	/* PLLE special case: use cpcon field to store cml divider value */
-	{ 12000000,  100000000, 150, 1,  18, 11},
-	{ 216000000, 100000000, 200, 18, 24, 13},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_e = {
-	.name      = "pll_e",
-	.flags     = PLL_ALT_MISC_REG,
-	.ops       = &tegra_plle_ops,
-	.reg       = 0xe8,
-	.max_rate  = 100000000,
-	.u.pll = {
-		.input_min = 12000000,
-		.input_max = 216000000,
-		.cf_min    = 12000000,
-		.cf_max    = 12000000,
-		.vco_min   = 1200000000,
-		.vco_max   = 2400000000U,
-		.freq_table = tegra_pll_e_freq_table,
-		.lock_delay = 300,
-		.fixed_rate = 100000000,
-	},
-};
-
-static struct clk tegra_cml0_clk = {
-	.name      = "cml0",
-	.parent    = &tegra_pll_e,
-	.ops       = &tegra_cml_clk_ops,
-	.reg       = PLLE_AUX,
-	.max_rate  = 100000000,
-	.u.periph  = {
-		.clk_num = 0,
-	},
-};
-
-static struct clk tegra_cml1_clk = {
-	.name      = "cml1",
-	.parent    = &tegra_pll_e,
-	.ops       = &tegra_cml_clk_ops,
-	.reg       = PLLE_AUX,
-	.max_rate  = 100000000,
-	.u.periph  = {
-		.clk_num   = 1,
-	},
-};
-
-static struct clk tegra_pciex_clk = {
-	.name      = "pciex",
-	.parent    = &tegra_pll_e,
-	.ops       = &tegra_pciex_clk_ops,
-	.max_rate  = 100000000,
-	.u.periph  = {
-		.clk_num   = 74,
-	},
-};
-
-/* Audio sync clocks */
-#define SYNC_SOURCE(_id)				\
-	{						\
-		.name      = #_id "_sync",		\
-		.rate      = 24000000,			\
-		.max_rate  = 24000000,			\
-		.ops       = &tegra_sync_source_ops	\
-	}
-static struct clk tegra_sync_source_list[] = {
-	SYNC_SOURCE(spdif_in),
-	SYNC_SOURCE(i2s0),
-	SYNC_SOURCE(i2s1),
-	SYNC_SOURCE(i2s2),
-	SYNC_SOURCE(i2s3),
-	SYNC_SOURCE(i2s4),
-	SYNC_SOURCE(vimclk),
-};
-
-static struct clk_mux_sel mux_audio_sync_clk[] = {
-	{ .input = &tegra_sync_source_list[0],	.value = 0},
-	{ .input = &tegra_sync_source_list[1],	.value = 1},
-	{ .input = &tegra_sync_source_list[2],	.value = 2},
-	{ .input = &tegra_sync_source_list[3],	.value = 3},
-	{ .input = &tegra_sync_source_list[4],	.value = 4},
-	{ .input = &tegra_sync_source_list[5],	.value = 5},
-	{ .input = &tegra_pll_a_out0,		.value = 6},
-	{ .input = &tegra_sync_source_list[6],	.value = 7},
-	{ 0, 0 }
+struct clk_ops tegra_cml_clk_ops = {
+	.is_enabled = tegra30_cml_clk_is_enabled,
+	.enable = tegra30_cml_clk_enable,
+	.disable = tegra30_cml_clk_disable,
+	.recalc_rate = tegra30_clk_fixed_recalc_rate,
 };
 
-#define AUDIO_SYNC_CLK(_id, _index)			\
-	{						\
-		.name      = #_id,			\
-		.inputs    = mux_audio_sync_clk,	\
-		.reg       = 0x4A0 + (_index) * 4,	\
-		.max_rate  = 24000000,			\
-		.ops       = &tegra_audio_sync_clk_ops	\
-	}
-static struct clk tegra_clk_audio_list[] = {
-	AUDIO_SYNC_CLK(audio0, 0),
-	AUDIO_SYNC_CLK(audio1, 1),
-	AUDIO_SYNC_CLK(audio2, 2),
-	AUDIO_SYNC_CLK(audio3, 3),
-	AUDIO_SYNC_CLK(audio4, 4),
-	AUDIO_SYNC_CLK(audio, 5),	/* SPDIF */
+struct clk_ops tegra_pciex_clk_ops = {
+	.recalc_rate = tegra30_clk_fixed_recalc_rate,
 };
 
-#define AUDIO_SYNC_2X_CLK(_id, _index)				\
-	{							\
-		.name      = #_id "_2x",			\
-		.flags     = PERIPH_NO_RESET,			\
-		.max_rate  = 48000000,				\
-		.ops       = &tegra_clk_double_ops,		\
-		.reg       = 0x49C,				\
-		.reg_shift = 24 + (_index),			\
-		.parent    = &tegra_clk_audio_list[(_index)],	\
-		.u.periph = {					\
-			.clk_num = 113 + (_index),		\
-		},						\
-	}
-static struct clk tegra_clk_audio_2x_list[] = {
-	AUDIO_SYNC_2X_CLK(audio0, 0),
-	AUDIO_SYNC_2X_CLK(audio1, 1),
-	AUDIO_SYNC_2X_CLK(audio2, 2),
-	AUDIO_SYNC_2X_CLK(audio3, 3),
-	AUDIO_SYNC_2X_CLK(audio4, 4),
-	AUDIO_SYNC_2X_CLK(audio, 5),	/* SPDIF */
-};
+/* Tegra30 CPU clock and reset control functions */
+static void tegra30_wait_cpu_in_reset(u32 cpu)
+{
+	unsigned int reg;
 
-#define MUX_I2S_SPDIF(_id, _index)					\
-static struct clk_mux_sel mux_pllaout0_##_id##_2x_pllp_clkm[] = {	\
-	{.input = &tegra_pll_a_out0, .value = 0},			\
-	{.input = &tegra_clk_audio_2x_list[(_index)], .value = 1},	\
-	{.input = &tegra_pll_p, .value = 2},				\
-	{.input = &tegra_clk_m, .value = 3},				\
-	{ 0, 0},							\
-}
-MUX_I2S_SPDIF(audio0, 0);
-MUX_I2S_SPDIF(audio1, 1);
-MUX_I2S_SPDIF(audio2, 2);
-MUX_I2S_SPDIF(audio3, 3);
-MUX_I2S_SPDIF(audio4, 4);
-MUX_I2S_SPDIF(audio, 5);		/* SPDIF */
-
-/* External clock outputs (through PMC) */
-#define MUX_EXTERN_OUT(_id)						\
-static struct clk_mux_sel mux_clkm_clkm2_clkm4_extern##_id[] = {	\
-	{.input = &tegra_clk_m,		.value = 0},			\
-	{.input = &tegra_clk_m_div2,	.value = 1},			\
-	{.input = &tegra_clk_m_div4,	.value = 2},			\
-	{.input = NULL,			.value = 3}, /* placeholder */	\
-	{ 0, 0},							\
-}
-MUX_EXTERN_OUT(1);
-MUX_EXTERN_OUT(2);
-MUX_EXTERN_OUT(3);
-
-static struct clk_mux_sel *mux_extern_out_list[] = {
-	mux_clkm_clkm2_clkm4_extern1,
-	mux_clkm_clkm2_clkm4_extern2,
-	mux_clkm_clkm2_clkm4_extern3,
-};
+	do {
+		reg = readl(reg_clk_base +
+			    TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
+		cpu_relax();
+	} while (!(reg & (1 << cpu)));	/* check CPU been reset or not */
 
-#define CLK_OUT_CLK(_id)					\
-	{							\
-		.name      = "clk_out_" #_id,			\
-		.lookup    = {					\
-			.dev_id    = "clk_out_" #_id,		\
-			.con_id	   = "extern" #_id,		\
-		},						\
-		.ops       = &tegra_clk_out_ops,		\
-		.reg       = 0x1a8,				\
-		.inputs    = mux_clkm_clkm2_clkm4_extern##_id,	\
-		.flags     = MUX_CLK_OUT,			\
-		.max_rate  = 216000000,				\
-		.u.periph = {					\
-			.clk_num   = (_id - 1) * 8 + 2,		\
-		},						\
-	}
-static struct clk tegra_clk_out_list[] = {
-	CLK_OUT_CLK(1),
-	CLK_OUT_CLK(2),
-	CLK_OUT_CLK(3),
-};
+	return;
+}
 
-/* called after peripheral external clocks are initialized */
-static void init_clk_out_mux(void)
+static void tegra30_put_cpu_in_reset(u32 cpu)
 {
-	int i;
-	struct clk *c;
-
-	/* output clock con_id is the name of peripheral
-	   external clock connected to input 3 of the output mux */
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) {
-		c = tegra_get_clock_by_name(
-			tegra_clk_out_list[i].lookup.con_id);
-		if (!c)
-			pr_err("%s: could not find clk %s\n", __func__,
-			       tegra_clk_out_list[i].lookup.con_id);
-		mux_extern_out_list[i][3].input = c;
-	}
+	writel(CPU_RESET(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+	dmb();
 }
 
-/* Peripheral muxes */
-static struct clk_mux_sel mux_sclk[] = {
-	{ .input = &tegra_clk_m,	.value = 0},
-	{ .input = &tegra_pll_c_out1,	.value = 1},
-	{ .input = &tegra_pll_p_out4,	.value = 2},
-	{ .input = &tegra_pll_p_out3,	.value = 3},
-	{ .input = &tegra_pll_p_out2,	.value = 4},
-	/* { .input = &tegra_clk_d,	.value = 5}, - no use on tegra30 */
-	{ .input = &tegra_clk_32k,	.value = 6},
-	{ .input = &tegra_pll_m_out1,	.value = 7},
-	{ 0, 0},
-};
-
-static struct clk tegra_clk_sclk = {
-	.name	= "sclk",
-	.inputs	= mux_sclk,
-	.reg	= 0x28,
-	.ops	= &tegra_super_ops,
-	.max_rate = 334000000,
-	.min_rate = 40000000,
-};
-
-static struct clk tegra_clk_blink = {
-	.name		= "blink",
-	.parent		= &tegra_clk_32k,
-	.reg		= 0x40,
-	.ops		= &tegra_blink_clk_ops,
-	.max_rate	= 32768,
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
-	{ .input = &tegra_pll_m, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_pll_a_out0, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
-	{ .input = &tegra_pll_p, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_m, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_clkm[] = {
-	{ .input = &tegra_pll_p, .value = 0},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
-	{.input = &tegra_pll_p, .value = 0},
-	{.input = &tegra_pll_d_out0, .value = 1},
-	{.input = &tegra_pll_c, .value = 2},
-	{.input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
-	{.input = &tegra_pll_p, .value = 0},
-	{.input = &tegra_pll_m, .value = 1},
-	{.input = &tegra_pll_d_out0, .value = 2},
-	{.input = &tegra_pll_a_out0, .value = 3},
-	{.input = &tegra_pll_c, .value = 4},
-	{.input = &tegra_pll_d2_out0, .value = 5},
-	{.input = &tegra_clk_m, .value = 6},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plla_pllc_pllp_clkm[] = {
-	{ .input = &tegra_pll_a_out0, .value = 0},
-	/* { .input = &tegra_pll_c, .value = 1}, no use on tegra30 */
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_clk32_clkm[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_clk_32k,   .value = 2},
-	{.input = &tegra_clk_m,     .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_clkm_clk32[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_clk_m,     .value = 2},
-	{.input = &tegra_clk_32k,   .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_pll_m,     .value = 2},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_clk_m[] = {
-	{ .input = &tegra_clk_m, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_out3[] = {
-	{ .input = &tegra_pll_p_out3, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plld_out0[] = {
-	{ .input = &tegra_pll_d_out0, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plld_out0_plld2_out0[] = {
-	{ .input = &tegra_pll_d_out0,  .value = 0},
-	{ .input = &tegra_pll_d2_out0, .value = 1},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_clk_32k[] = {
-	{ .input = &tegra_clk_32k, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plla_clk32_pllp_clkm_plle[] = {
-	{ .input = &tegra_pll_a_out0, .value = 0},
-	{ .input = &tegra_clk_32k,    .value = 1},
-	{ .input = &tegra_pll_p,      .value = 2},
-	{ .input = &tegra_clk_m,      .value = 3},
-	{ .input = &tegra_pll_e,      .value = 4},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_cclk_g[] = {
-	{ .input = &tegra_clk_m,        .value = 0},
-	{ .input = &tegra_pll_c,        .value = 1},
-	{ .input = &tegra_clk_32k,      .value = 2},
-	{ .input = &tegra_pll_m,        .value = 3},
-	{ .input = &tegra_pll_p,        .value = 4},
-	{ .input = &tegra_pll_p_out4,   .value = 5},
-	{ .input = &tegra_pll_p_out3,   .value = 6},
-	{ .input = &tegra_pll_x,        .value = 8},
-	{ 0, 0},
-};
-
-static struct clk tegra_clk_cclk_g = {
-	.name	= "cclk_g",
-	.flags	= DIV_U71 | DIV_U71_INT,
-	.inputs = mux_cclk_g,
-	.reg	= 0x368,
-	.ops	= &tegra_super_ops,
-	.max_rate = 1700000000,
-};
-
-static struct clk tegra30_clk_twd = {
-	.parent	  = &tegra_clk_cclk_g,
-	.name     = "twd",
-	.ops      = &tegra30_twd_ops,
-	.max_rate = 1400000000,	/* Same as tegra_clk_cpu_cmplx.max_rate */
-	.mul      = 1,
-	.div      = 2,
-};
-
-#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id	   = _con,		\
-		},					\
-		.ops       = &tegra_periph_clk_ops,	\
-		.reg       = _reg,			\
-		.inputs    = _inputs,			\
-		.flags     = _flags,			\
-		.max_rate  = _max,			\
-		.u.periph = {				\
-			.clk_num   = _clk_num,		\
-		},					\
-	}
-
-#define PERIPH_CLK_EX(_name, _dev, _con, _clk_num, _reg, _max, _inputs,	\
-			_flags, _ops)					\
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id	   = _con,		\
-		},					\
-		.ops       = _ops,			\
-		.reg       = _reg,			\
-		.inputs    = _inputs,			\
-		.flags     = _flags,			\
-		.max_rate  = _max,			\
-		.u.periph = {				\
-			.clk_num   = _clk_num,		\
-		},					\
-	}
-
-#define SHARED_CLK(_name, _dev, _con, _parent, _id, _div, _mode)\
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id    = _con,		\
-		},					\
-		.ops       = &tegra_clk_shared_bus_ops,	\
-		.parent = _parent,			\
-		.u.shared_bus_user = {			\
-			.client_id = _id,		\
-			.client_div = _div,		\
-			.mode = _mode,			\
-		},					\
-	}
-struct clk tegra_list_clks[] = {
-	PERIPH_CLK("apbdma",	"tegra-apbdma",		NULL,	34,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB),
-	PERIPH_CLK("kbc",	"tegra-kbc",		NULL,	36,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB),
-	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("kfuse",	"kfuse-tegra",		NULL,	40,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("fuse",	"fuse-tegra",		"fuse",	39,	0,	26000000,  mux_clk_m,			PERIPH_ON_APB),
-	PERIPH_CLK("fuse_burn",	"fuse-tegra",		"fuse_burn",	39,	0,	26000000,  mux_clk_m,		PERIPH_ON_APB),
-	PERIPH_CLK("apbif",	"tegra30-ahub",		"apbif", 107,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("i2s0",	"tegra30-i2s.0",	NULL,	30,	0x1d8,	26000000,  mux_pllaout0_audio0_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s1",	"tegra30-i2s.1",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio1_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s2",	"tegra30-i2s.2",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s3",	"tegra30-i2s.3",	NULL,	101,	0x3bc,	26000000,  mux_pllaout0_audio3_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s4",	"tegra30-i2s.4",	NULL,	102,	0x3c0,	26000000,  mux_pllaout0_audio4_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("spdif_out",	"tegra30-spdif",	"spdif_out",	10,	0x108,	100000000, mux_pllaout0_audio_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("spdif_in",	"tegra30-spdif",	"spdif_in",	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("pwm",	"tegra-pwm",		NULL,	17,	0x110,	432000000, mux_pllp_pllc_clk32_clkm,	MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("d_audio",	"tegra30-ahub",		"d_audio", 106,	0x3d0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("dam0",	"tegra30-dam.0",	NULL,   108,	0x3d8,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("dam1",	"tegra30-dam.1",	NULL,   109,	0x3dc,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("dam2",	"tegra30-dam.2",	NULL,   110,	0x3e0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("hda",	"tegra30-hda",		"hda",   125,	0x428,	108000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("hda2codec_2x",	"tegra30-hda",	"hda2codec",   111,	0x3e4,	48000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("hda2hdmi",	"tegra30-hda",		"hda2hdmi",	128,	0,	48000000,  mux_clk_m,			0),
-	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc5",	"spi_tegra.4",		NULL,	104,	0x3c8,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc6",	"spi_tegra.5",		NULL,	105,	0x3cc,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sata_oob",	"tegra_sata_oob",	NULL,	123,	0x420,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sata",	"tegra_sata",		NULL,	124,	0x424,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sata_cold",	"tegra_sata_cold",	NULL,	129,	0,	48000000,  mux_clk_m,			0),
-	PERIPH_CLK_EX("ndflash", "tegra_nand",		NULL,	13,	0x160,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71,	&tegra_nand_clk_ops),
-	PERIPH_CLK("ndspeed",	"tegra_nand_speed",	NULL,	80,	0x3f8,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x164,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("vcp",	"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsea",	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsev",	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("vde",	"vde",			NULL,	61,	0x1c8,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* max rate ??? */
-	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("owr",	"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	127000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB), /* scales with voltage */
-	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c4",	"tegra-i2c.3",		NULL,	103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c5",	"tegra-i2c.4",		NULL,	47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("uarta",	"tegra-uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartb",	"tegra-uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartc",	"tegra-uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartd",	"tegra-uart.3",		NULL,	65,	0x1c0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarte",	"tegra-uart.4",		NULL,	66,	0x1c4,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK_EX("vi",	"tegra_camera",		"vi",	20,	0x148,	425000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT,	&tegra_vi_clk_ops),
-	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
-	PERIPH_CLK("3d2",       "3d2",			NULL,	98,	0x3b0,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
-	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE),
-	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET),
-	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	260000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK_EX("dtv",	"dtv",			NULL,	79,	0x1dc,	250000000, mux_clk_m,			0,		&tegra_dtv_clk_ops),
-	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	220000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8),
-	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8),
-	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("dsia",	"tegradc.0",		"dsia",	48,	0,	500000000, mux_plld_out0,		0),
-	PERIPH_CLK_EX("dsib",	"tegradc.1",		"dsib",	82,	0xd0,	500000000, mux_plld_out0_plld2_out0,	MUX | PLLD,	&tegra_dsib_clk_ops),
-	PERIPH_CLK("csi",	"tegra_camera",		"csi",	52,	0,	102000000, mux_pllp_out3,		0),
-	PERIPH_CLK("isp",	"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0), /* same frequency as VI */
-	PERIPH_CLK("csus",	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET),
-
-	PERIPH_CLK("tsensor",	"tegra-tsensor",	NULL,	100,	0x3b8,	216000000, mux_pllp_pllc_clkm_clk32,	MUX | DIV_U71),
-	PERIPH_CLK("actmon",	"actmon",		NULL,	119,	0x3e8,	216000000, mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("extern1",	"extern1",		NULL,	120,	0x3ec,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("extern2",	"extern2",		NULL,	121,	0x3f0,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("extern3",	"extern3",		NULL,	122,	0x3f4,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("i2cslow",	"i2cslow",		NULL,	81,	0x3fc,	26000000,  mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("pcie",	"tegra-pcie",		"pcie",	70,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("afi",	"tegra-pcie",		"afi",	72,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("se",	"se",			NULL,	127,	0x42c,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT),
-};
-
-#define CLK_DUPLICATE(_name, _dev, _con)		\
-	{						\
-		.name	= _name,			\
-		.lookup	= {				\
-			.dev_id	= _dev,			\
-			.con_id		= _con,		\
-		},					\
-	}
-
-/* Some clocks may be used by different drivers depending on the board
- * configuration.  List those here to register them twice in the clock lookup
- * table under two names.
- */
-struct clk_duplicate tegra_clk_duplicates[] = {
-	CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
-	CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
-	CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
-	CLK_DUPLICATE("uartd",  "serial8250.3", NULL),
-	CLK_DUPLICATE("uarte",  "serial8250.4", NULL),
-	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
-	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
-	CLK_DUPLICATE("usbd", "tegra-otg", NULL),
-	CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
-	CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
-	CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
-	CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
-	CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
-	CLK_DUPLICATE("bsev", "nvavp", "bsev"),
-	CLK_DUPLICATE("vde", "tegra-aes", "vde"),
-	CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
-	CLK_DUPLICATE("bsea", "nvavp", "bsea"),
-	CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
-	CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
-	CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
-	CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
-	CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
-	CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
-	CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
-	CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
-	CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
-	CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
-	CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
-	CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
-	CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
-	CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
-	CLK_DUPLICATE("twd", "smp_twd", NULL),
-	CLK_DUPLICATE("vcp", "nvavp", "vcp"),
-	CLK_DUPLICATE("i2s0", NULL, "i2s0"),
-	CLK_DUPLICATE("i2s1", NULL, "i2s1"),
-	CLK_DUPLICATE("i2s2", NULL, "i2s2"),
-	CLK_DUPLICATE("i2s3", NULL, "i2s3"),
-	CLK_DUPLICATE("i2s4", NULL, "i2s4"),
-	CLK_DUPLICATE("dam0", NULL, "dam0"),
-	CLK_DUPLICATE("dam1", NULL, "dam1"),
-	CLK_DUPLICATE("dam2", NULL, "dam2"),
-	CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
-};
-
-struct clk *tegra_ptr_clks[] = {
-	&tegra_clk_32k,
-	&tegra_clk_m,
-	&tegra_clk_m_div2,
-	&tegra_clk_m_div4,
-	&tegra_pll_ref,
-	&tegra_pll_m,
-	&tegra_pll_m_out1,
-	&tegra_pll_c,
-	&tegra_pll_c_out1,
-	&tegra_pll_p,
-	&tegra_pll_p_out1,
-	&tegra_pll_p_out2,
-	&tegra_pll_p_out3,
-	&tegra_pll_p_out4,
-	&tegra_pll_a,
-	&tegra_pll_a_out0,
-	&tegra_pll_d,
-	&tegra_pll_d_out0,
-	&tegra_pll_d2,
-	&tegra_pll_d2_out0,
-	&tegra_pll_u,
-	&tegra_pll_x,
-	&tegra_pll_x_out0,
-	&tegra_pll_e,
-	&tegra_clk_cclk_g,
-	&tegra_cml0_clk,
-	&tegra_cml1_clk,
-	&tegra_pciex_clk,
-	&tegra_clk_sclk,
-	&tegra_clk_blink,
-	&tegra30_clk_twd,
-};
-
-
-static void tegra30_init_one_clock(struct clk *c)
+static void tegra30_cpu_out_of_reset(u32 cpu)
 {
-	clk_init(c);
-	INIT_LIST_HEAD(&c->shared_bus_list);
-	if (!c->lookup.dev_id && !c->lookup.con_id)
-		c->lookup.con_id = c->name;
-	c->lookup.clk = c;
-	clkdev_add(&c->lookup);
+	writel(CPU_RESET(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+	wmb();
 }
 
-void __init tegra30_init_clocks(void)
+static void tegra30_enable_cpu_clock(u32 cpu)
 {
-	int i;
-	struct clk *c;
+	unsigned int reg;
 
-	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
-		tegra30_init_one_clock(tegra_ptr_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
-		tegra30_init_one_clock(&tegra_list_clks[i]);
+	writel(CPU_CLOCK(cpu),
+	       reg_clk_base + TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+	reg = readl(reg_clk_base +
+		    TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+}
 
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
-		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
-		if (!c) {
-			pr_err("%s: Unknown duplicate clock %s\n", __func__,
-				tegra_clk_duplicates[i].name);
-			continue;
-		}
+static void tegra30_disable_cpu_clock(u32 cpu)
+{
 
-		tegra_clk_duplicates[i].lookup.clk = c;
-		clkdev_add(&tegra_clk_duplicates[i].lookup);
-	}
+	unsigned int reg;
 
-	for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
-		tegra30_init_one_clock(&tegra_sync_source_list[i]);
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
-		tegra30_init_one_clock(&tegra_clk_audio_list[i]);
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
-		tegra30_init_one_clock(&tegra_clk_audio_2x_list[i]);
+	reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	writel(reg | CPU_CLOCK(cpu),
+	       reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
 
-	init_clk_out_mux();
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
-		tegra30_init_one_clock(&tegra_clk_out_list[i]);
+static struct tegra_cpu_car_ops tegra30_cpu_car_ops = {
+	.wait_for_reset	= tegra30_wait_cpu_in_reset,
+	.put_in_reset	= tegra30_put_cpu_in_reset,
+	.out_of_reset	= tegra30_cpu_out_of_reset,
+	.enable_clock	= tegra30_enable_cpu_clock,
+	.disable_clock	= tegra30_disable_cpu_clock,
+};
 
+void __init tegra30_cpu_car_ops_init(void)
+{
+	tegra_cpu_car_ops = &tegra30_cpu_car_ops;
 }
diff --git a/arch/arm/mach-tegra/tegra30_clocks.h b/arch/arm/mach-tegra/tegra30_clocks.h
new file mode 100644
index 000000000000..f2f88fef6b8b
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra30_clocks.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA30_CLOCK_H
+#define __MACH_TEGRA30_CLOCK_H
+
+extern struct clk_ops tegra30_clk_32k_ops;
+extern struct clk_ops tegra30_clk_m_ops;
+extern struct clk_ops tegra_clk_m_div_ops;
+extern struct clk_ops tegra_pll_ref_ops;
+extern struct clk_ops tegra30_pll_ops;
+extern struct clk_ops tegra30_pll_div_ops;
+extern struct clk_ops tegra_plld_ops;
+extern struct clk_ops tegra30_plle_ops;
+extern struct clk_ops tegra_cml_clk_ops;
+extern struct clk_ops tegra_pciex_clk_ops;
+extern struct clk_ops tegra_sync_source_ops;
+extern struct clk_ops tegra30_audio_sync_clk_ops;
+extern struct clk_ops tegra30_clk_double_ops;
+extern struct clk_ops tegra_clk_out_ops;
+extern struct clk_ops tegra30_super_ops;
+extern struct clk_ops tegra30_blink_clk_ops;
+extern struct clk_ops tegra30_twd_ops;
+extern struct clk_ops tegra30_periph_clk_ops;
+extern struct clk_ops tegra30_dsib_clk_ops;
+extern struct clk_ops tegra_nand_clk_ops;
+extern struct clk_ops tegra_vi_clk_ops;
+extern struct clk_ops tegra_dtv_clk_ops;
+extern struct clk_ops tegra_clk_shared_bus_ops;
+
+int tegra30_plld_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting);
+void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert);
+int tegra30_vi_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting);
+int tegra30_nand_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting);
+int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw,
+				enum tegra_clk_ex_param p, u32 setting);
+#endif
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
new file mode 100644
index 000000000000..d92cb556ae35
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -0,0 +1,1377 @@
+/*
+ * arch/arm/mach-tegra/tegra30_clocks.c
+ *
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/clk-private.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra30_clocks.h"
+#include "tegra_cpu_car.h"
+
+#define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags,		\
+		   _parent_names, _parents, _parent)		\
+	static struct clk tegra_##_name = {			\
+		.hw = &tegra_##_name##_hw.hw,			\
+		.name = #_name,					\
+		.rate = _rate,					\
+		.ops = _ops,					\
+		.flags = _flags,				\
+		.parent_names = _parent_names,			\
+		.parents = _parents,				\
+		.num_parents = ARRAY_SIZE(_parent_names),	\
+		.parent	= _parent,				\
+	};
+
+static struct clk tegra_clk_32k;
+static struct clk_tegra tegra_clk_32k_hw = {
+	.hw = {
+		.clk = &tegra_clk_32k,
+	},
+	.fixed_rate = 32768,
+};
+static struct clk tegra_clk_32k = {
+	.name = "clk_32k",
+	.hw = &tegra_clk_32k_hw.hw,
+	.ops = &tegra30_clk_32k_ops,
+	.flags = CLK_IS_ROOT,
+};
+
+static struct clk tegra_clk_m;
+static struct clk_tegra tegra_clk_m_hw = {
+	.hw = {
+		.clk = &tegra_clk_m,
+	},
+	.flags = ENABLE_ON_INIT,
+	.reg = 0x1fc,
+	.reg_shift = 28,
+	.max_rate = 48000000,
+};
+static struct clk tegra_clk_m = {
+	.name = "clk_m",
+	.hw = &tegra_clk_m_hw.hw,
+	.ops = &tegra30_clk_m_ops,
+	.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
+};
+
+static const char *clk_m_div_parent_names[] = {
+	"clk_m",
+};
+
+static struct clk *clk_m_div_parents[] = {
+	&tegra_clk_m,
+};
+
+static struct clk tegra_clk_m_div2;
+static struct clk_tegra tegra_clk_m_div2_hw = {
+	.hw = {
+		.clk = &tegra_clk_m_div2,
+	},
+	.mul = 1,
+	.div = 2,
+	.max_rate = 24000000,
+};
+DEFINE_CLK_TEGRA(clk_m_div2, 0, &tegra_clk_m_div_ops, 0,
+		clk_m_div_parent_names, clk_m_div_parents, &tegra_clk_m);
+
+static struct clk tegra_clk_m_div4;
+static struct clk_tegra tegra_clk_m_div4_hw = {
+	.hw = {
+		.clk = &tegra_clk_m_div4,
+	},
+	.mul = 1,
+	.div = 4,
+	.max_rate = 12000000,
+};
+DEFINE_CLK_TEGRA(clk_m_div4, 0, &tegra_clk_m_div_ops, 0,
+		clk_m_div_parent_names, clk_m_div_parents, &tegra_clk_m);
+
+static struct clk tegra_pll_ref;
+static struct clk_tegra tegra_pll_ref_hw = {
+	.hw = {
+		.clk = &tegra_pll_ref,
+	},
+	.flags = ENABLE_ON_INIT,
+	.max_rate = 26000000,
+};
+DEFINE_CLK_TEGRA(pll_ref, 0, &tegra_pll_ref_ops, 0, clk_m_div_parent_names,
+		clk_m_div_parents, &tegra_clk_m);
+
+#define DEFINE_PLL(_name, _flags, _reg, _max_rate, _input_min,	\
+		   _input_max, _cf_min, _cf_max, _vco_min,	\
+		   _vco_max, _freq_table, _lock_delay, _ops,	\
+		   _fixed_rate, _clk_cfg_ex, _parent)		\
+	static struct clk tegra_##_name;			\
+	static const char *_name##_parent_names[] = {		\
+		#_parent,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		&tegra_##_parent,				\
+	};							\
+	static struct clk_tegra tegra_##_name##_hw = {		\
+		.hw = {						\
+			.clk = &tegra_##_name,			\
+		},						\
+		.flags = _flags,				\
+		.reg = _reg,					\
+		.max_rate = _max_rate,				\
+		.u.pll = {					\
+			.input_min = _input_min,		\
+			.input_max = _input_max,		\
+			.cf_min = _cf_min,			\
+			.cf_max = _cf_max,			\
+			.vco_min = _vco_min,			\
+			.vco_max = _vco_max,			\
+			.freq_table = _freq_table,		\
+			.lock_delay = _lock_delay,		\
+			.fixed_rate = _fixed_rate,		\
+		},						\
+		.clk_cfg_ex = _clk_cfg_ex,			\
+	};							\
+	DEFINE_CLK_TEGRA(_name, 0, &_ops, CLK_IGNORE_UNUSED,	\
+			 _name##_parent_names, _name##_parents,	\
+			&tegra_##_parent);
+
+#define DEFINE_PLL_OUT(_name, _flags, _reg, _reg_shift,		\
+		_max_rate, _ops, _parent, _clk_flags)		\
+	static const char *_name##_parent_names[] = {		\
+		#_parent,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		&tegra_##_parent,				\
+	};							\
+	static struct clk tegra_##_name;			\
+	static struct clk_tegra tegra_##_name##_hw = {		\
+		.hw = {						\
+			.clk = &tegra_##_name,			\
+		},						\
+		.flags = _flags,				\
+		.reg = _reg,					\
+		.max_rate = _max_rate,				\
+		.reg_shift = _reg_shift,			\
+	};							\
+	DEFINE_CLK_TEGRA(_name, 0, &tegra30_pll_div_ops,	\
+		_clk_flags,  _name##_parent_names,		\
+		_name##_parents, &tegra_##_parent);
+
+static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+	{ 12000000, 1040000000, 520,  6, 1, 8},
+	{ 13000000, 1040000000, 480,  6, 1, 8},
+	{ 16800000, 1040000000, 495,  8, 1, 8},	/* actual: 1039.5 MHz */
+	{ 19200000, 1040000000, 325,  6, 1, 6},
+	{ 26000000, 1040000000, 520, 13, 1, 8},
+
+	{ 12000000, 832000000, 416,  6, 1, 8},
+	{ 13000000, 832000000, 832, 13, 1, 8},
+	{ 16800000, 832000000, 396,  8, 1, 8},	/* actual: 831.6 MHz */
+	{ 19200000, 832000000, 260,  6, 1, 8},
+	{ 26000000, 832000000, 416, 13, 1, 8},
+
+	{ 12000000, 624000000, 624, 12, 1, 8},
+	{ 13000000, 624000000, 624, 13, 1, 8},
+	{ 16800000, 600000000, 520, 14, 1, 8},
+	{ 19200000, 624000000, 520, 16, 1, 8},
+	{ 26000000, 624000000, 624, 26, 1, 8},
+
+	{ 12000000, 600000000, 600, 12, 1, 8},
+	{ 13000000, 600000000, 600, 13, 1, 8},
+	{ 16800000, 600000000, 500, 14, 1, 8},
+	{ 19200000, 600000000, 375, 12, 1, 6},
+	{ 26000000, 600000000, 600, 26, 1, 8},
+
+	{ 12000000, 520000000, 520, 12, 1, 8},
+	{ 13000000, 520000000, 520, 13, 1, 8},
+	{ 16800000, 520000000, 495, 16, 1, 8},	/* actual: 519.75 MHz */
+	{ 19200000, 520000000, 325, 12, 1, 6},
+	{ 26000000, 520000000, 520, 26, 1, 8},
+
+	{ 12000000, 416000000, 416, 12, 1, 8},
+	{ 13000000, 416000000, 416, 13, 1, 8},
+	{ 16800000, 416000000, 396, 16, 1, 8},	/* actual: 415.8 MHz */
+	{ 19200000, 416000000, 260, 12, 1, 6},
+	{ 26000000, 416000000, 416, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_c, PLL_HAS_CPCON, 0x80, 1400000000, 2000000, 31000000, 1000000,
+		6000000, 20000000, 1400000000, tegra_pll_c_freq_table, 300,
+		tegra30_pll_ops, 0, NULL, pll_ref);
+
+DEFINE_PLL_OUT(pll_c_out1, DIV_U71, 0x84, 0, 700000000,
+		tegra30_pll_div_ops, pll_c, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
+	{ 12000000, 666000000, 666, 12, 1, 8},
+	{ 13000000, 666000000, 666, 13, 1, 8},
+	{ 16800000, 666000000, 555, 14, 1, 8},
+	{ 19200000, 666000000, 555, 16, 1, 8},
+	{ 26000000, 666000000, 666, 26, 1, 8},
+	{ 12000000, 600000000, 600, 12, 1, 8},
+	{ 13000000, 600000000, 600, 13, 1, 8},
+	{ 16800000, 600000000, 500, 14, 1, 8},
+	{ 19200000, 600000000, 375, 12, 1, 6},
+	{ 26000000, 600000000, 600, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_m, PLL_HAS_CPCON | PLLM, 0x90, 800000000, 2000000, 31000000,
+		1000000, 6000000, 20000000, 1200000000, tegra_pll_m_freq_table,
+		300, tegra30_pll_ops, 0, NULL, pll_ref);
+
+DEFINE_PLL_OUT(pll_m_out1, DIV_U71, 0x94, 0, 600000000,
+		tegra30_pll_div_ops, pll_m, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
+	{ 12000000, 216000000, 432, 12, 2, 8},
+	{ 13000000, 216000000, 432, 13, 2, 8},
+	{ 16800000, 216000000, 360, 14, 2, 8},
+	{ 19200000, 216000000, 360, 16, 2, 8},
+	{ 26000000, 216000000, 432, 26, 2, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_p, ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, 0xa0, 432000000,
+		2000000, 31000000, 1000000, 6000000, 20000000, 1400000000,
+		tegra_pll_p_freq_table, 300, tegra30_pll_ops, 408000000, NULL,
+		pll_ref);
+
+DEFINE_PLL_OUT(pll_p_out1, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4,
+		0, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+DEFINE_PLL_OUT(pll_p_out2, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4,
+		16, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+DEFINE_PLL_OUT(pll_p_out3, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8,
+		0, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+DEFINE_PLL_OUT(pll_p_out4, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8,
+		16, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
+	{ 9600000, 564480000, 294, 5, 1, 4},
+	{ 9600000, 552960000, 288, 5, 1, 4},
+	{ 9600000, 24000000,  5,   2, 1, 1},
+
+	{ 28800000, 56448000, 49, 25, 1, 1},
+	{ 28800000, 73728000, 64, 25, 1, 1},
+	{ 28800000, 24000000,  5,  6, 1, 1},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_a, PLL_HAS_CPCON, 0xb0, 700000000, 2000000, 31000000, 1000000,
+		6000000, 20000000, 1400000000, tegra_pll_a_freq_table,
+		300, tegra30_pll_ops, 0, NULL, pll_p_out1);
+
+DEFINE_PLL_OUT(pll_a_out0, DIV_U71, 0xb4, 0, 100000000, tegra30_pll_div_ops,
+		pll_a, CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
+	{ 12000000, 216000000, 216, 12, 1, 4},
+	{ 13000000, 216000000, 216, 13, 1, 4},
+	{ 16800000, 216000000, 180, 14, 1, 4},
+	{ 19200000, 216000000, 180, 16, 1, 4},
+	{ 26000000, 216000000, 216, 26, 1, 4},
+
+	{ 12000000, 594000000, 594, 12, 1, 8},
+	{ 13000000, 594000000, 594, 13, 1, 8},
+	{ 16800000, 594000000, 495, 14, 1, 8},
+	{ 19200000, 594000000, 495, 16, 1, 8},
+	{ 26000000, 594000000, 594, 26, 1, 8},
+
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_d, PLL_HAS_CPCON | PLLD, 0xd0, 1000000000, 2000000, 40000000,
+		1000000, 6000000, 40000000, 1000000000, tegra_pll_d_freq_table,
+		1000, tegra30_pll_ops, 0, tegra30_plld_clk_cfg_ex, pll_ref);
+
+DEFINE_PLL_OUT(pll_d_out0, DIV_2 | PLLD, 0, 0, 500000000, tegra30_pll_div_ops,
+		pll_d, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED);
+
+DEFINE_PLL(pll_d2, PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD, 0x4b8, 1000000000,
+		2000000, 40000000, 1000000, 6000000, 40000000, 1000000000,
+		tegra_pll_d_freq_table, 1000, tegra30_pll_ops, 0, NULL,
+		pll_ref);
+
+DEFINE_PLL_OUT(pll_d2_out0, DIV_2 | PLLD, 0, 0, 500000000, tegra30_pll_div_ops,
+		pll_d2, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
+	{ 12000000, 480000000, 960, 12, 2, 12},
+	{ 13000000, 480000000, 960, 13, 2, 12},
+	{ 16800000, 480000000, 400, 7,  2, 5},
+	{ 19200000, 480000000, 200, 4,  2, 3},
+	{ 26000000, 480000000, 960, 26, 2, 12},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_u, PLL_HAS_CPCON | PLLU, 0xc0, 480000000, 2000000, 40000000,
+		1000000, 6000000, 48000000, 960000000, tegra_pll_u_freq_table,
+		1000, tegra30_pll_ops, 0, NULL, pll_ref);
+
+static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
+	/* 1.7 GHz */
+	{ 12000000, 1700000000, 850,  6,  1, 8},
+	{ 13000000, 1700000000, 915,  7,  1, 8},	/* actual: 1699.2 MHz */
+	{ 16800000, 1700000000, 708,  7,  1, 8},	/* actual: 1699.2 MHz */
+	{ 19200000, 1700000000, 885,  10, 1, 8},	/* actual: 1699.2 MHz */
+	{ 26000000, 1700000000, 850,  13, 1, 8},
+
+	/* 1.6 GHz */
+	{ 12000000, 1600000000, 800,  6,  1, 8},
+	{ 13000000, 1600000000, 738,  6,  1, 8},	/* actual: 1599.0 MHz */
+	{ 16800000, 1600000000, 857,  9,  1, 8},	/* actual: 1599.7 MHz */
+	{ 19200000, 1600000000, 500,  6,  1, 8},
+	{ 26000000, 1600000000, 800,  13, 1, 8},
+
+	/* 1.5 GHz */
+	{ 12000000, 1500000000, 750,  6,  1, 8},
+	{ 13000000, 1500000000, 923,  8,  1, 8},	/* actual: 1499.8 MHz */
+	{ 16800000, 1500000000, 625,  7,  1, 8},
+	{ 19200000, 1500000000, 625,  8,  1, 8},
+	{ 26000000, 1500000000, 750,  13, 1, 8},
+
+	/* 1.4 GHz */
+	{ 12000000, 1400000000, 700,  6,  1, 8},
+	{ 13000000, 1400000000, 969,  9,  1, 8},	/* actual: 1399.7 MHz */
+	{ 16800000, 1400000000, 1000, 12, 1, 8},
+	{ 19200000, 1400000000, 875,  12, 1, 8},
+	{ 26000000, 1400000000, 700,  13, 1, 8},
+
+	/* 1.3 GHz */
+	{ 12000000, 1300000000, 975,  9,  1, 8},
+	{ 13000000, 1300000000, 1000, 10, 1, 8},
+	{ 16800000, 1300000000, 928,  12, 1, 8},	/* actual: 1299.2 MHz */
+	{ 19200000, 1300000000, 812,  12, 1, 8},	/* actual: 1299.2 MHz */
+	{ 26000000, 1300000000, 650,  13, 1, 8},
+
+	/* 1.2 GHz */
+	{ 12000000, 1200000000, 1000, 10, 1, 8},
+	{ 13000000, 1200000000, 923,  10, 1, 8},	/* actual: 1199.9 MHz */
+	{ 16800000, 1200000000, 1000, 14, 1, 8},
+	{ 19200000, 1200000000, 1000, 16, 1, 8},
+	{ 26000000, 1200000000, 600,  13, 1, 8},
+
+	/* 1.1 GHz */
+	{ 12000000, 1100000000, 825,  9,  1, 8},
+	{ 13000000, 1100000000, 846,  10, 1, 8},	/* actual: 1099.8 MHz */
+	{ 16800000, 1100000000, 982,  15, 1, 8},	/* actual: 1099.8 MHz */
+	{ 19200000, 1100000000, 859,  15, 1, 8},	/* actual: 1099.5 MHz */
+	{ 26000000, 1100000000, 550,  13, 1, 8},
+
+	/* 1 GHz */
+	{ 12000000, 1000000000, 1000, 12, 1, 8},
+	{ 13000000, 1000000000, 1000, 13, 1, 8},
+	{ 16800000, 1000000000, 833,  14, 1, 8},	/* actual: 999.6 MHz */
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 8},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_x, PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX, 0xe0, 1700000000,
+		2000000, 31000000, 1000000, 6000000, 20000000, 1700000000,
+		tegra_pll_x_freq_table, 300, tegra30_pll_ops, 0, NULL, pll_ref);
+
+DEFINE_PLL_OUT(pll_x_out0, DIV_2 | PLLX, 0, 0, 850000000, tegra30_pll_div_ops,
+		pll_x, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED);
+
+static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
+	/* PLLE special case: use cpcon field to store cml divider value */
+	{ 12000000,  100000000, 150, 1,  18, 11},
+	{ 216000000, 100000000, 200, 18, 24, 13},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+DEFINE_PLL(pll_e, PLL_ALT_MISC_REG, 0xe8, 100000000, 2000000, 216000000,
+		12000000, 12000000, 1200000000, 2400000000U,
+		tegra_pll_e_freq_table, 300, tegra30_plle_ops, 100000000, NULL,
+		pll_ref);
+
+static const char *mux_plle[] = {
+	"pll_e",
+};
+
+static struct clk *mux_plle_p[] = {
+	&tegra_pll_e,
+};
+
+static struct clk tegra_cml0;
+static struct clk_tegra tegra_cml0_hw = {
+	.hw = {
+		.clk = &tegra_cml0,
+	},
+	.reg = 0x48c,
+	.fixed_rate = 100000000,
+	.u.periph = {
+		.clk_num = 0,
+	},
+};
+DEFINE_CLK_TEGRA(cml0, 0, &tegra_cml_clk_ops, 0, mux_plle,
+		mux_plle_p, &tegra_pll_e);
+
+static struct clk tegra_cml1;
+static struct clk_tegra tegra_cml1_hw = {
+	.hw = {
+		.clk = &tegra_cml1,
+	},
+	.reg = 0x48c,
+	.fixed_rate = 100000000,
+	.u.periph = {
+		.clk_num = 1,
+	},
+};
+DEFINE_CLK_TEGRA(cml1, 0, &tegra_cml_clk_ops, 0, mux_plle,
+		mux_plle_p, &tegra_pll_e);
+
+static struct clk tegra_pciex;
+static struct clk_tegra tegra_pciex_hw = {
+	.hw = {
+		.clk = &tegra_pciex,
+	},
+	.reg = 0x48c,
+	.fixed_rate = 100000000,
+	.reset = tegra30_periph_clk_reset,
+	.u.periph = {
+		.clk_num = 74,
+	},
+};
+DEFINE_CLK_TEGRA(pciex, 0, &tegra_pciex_clk_ops, 0, mux_plle,
+		mux_plle_p, &tegra_pll_e);
+
+#define SYNC_SOURCE(_name)					\
+	static struct clk tegra_##_name##_sync;			\
+	static struct clk_tegra tegra_##_name##_sync_hw = {	\
+		.hw = {						\
+			.clk = &tegra_##_name##_sync,		\
+		},						\
+		.max_rate = 24000000,				\
+		.fixed_rate = 24000000,				\
+	};							\
+	static struct clk tegra_##_name##_sync = {		\
+		.name = #_name "_sync",				\
+		.hw = &tegra_##_name##_sync_hw.hw,		\
+		.ops = &tegra_sync_source_ops,			\
+		.flags = CLK_IS_ROOT,				\
+	};
+
+SYNC_SOURCE(spdif_in);
+SYNC_SOURCE(i2s0);
+SYNC_SOURCE(i2s1);
+SYNC_SOURCE(i2s2);
+SYNC_SOURCE(i2s3);
+SYNC_SOURCE(i2s4);
+SYNC_SOURCE(vimclk);
+
+static struct clk *tegra_sync_source_list[] = {
+	&tegra_spdif_in_sync,
+	&tegra_i2s0_sync,
+	&tegra_i2s1_sync,
+	&tegra_i2s2_sync,
+	&tegra_i2s3_sync,
+	&tegra_i2s4_sync,
+	&tegra_vimclk_sync,
+};
+
+static const char *mux_audio_sync_clk[] = {
+	"spdif_in_sync",
+	"i2s0_sync",
+	"i2s1_sync",
+	"i2s2_sync",
+	"i2s3_sync",
+	"i2s4_sync",
+	"vimclk_sync",
+};
+
+#define AUDIO_SYNC_CLK(_name, _index)				\
+	static struct clk tegra_##_name;			\
+	static struct clk_tegra tegra_##_name##_hw = {		\
+		.hw = {						\
+			.clk = &tegra_##_name,			\
+		},						\
+		.max_rate = 24000000,				\
+		.reg = 0x4A0 + (_index) * 4,			\
+	};							\
+	static struct clk tegra_##_name = {			\
+		.name = #_name,					\
+		.ops = &tegra30_audio_sync_clk_ops,		\
+		.hw = &tegra_##_name##_hw.hw,			\
+		.parent_names = mux_audio_sync_clk,		\
+		.parents = tegra_sync_source_list,		\
+		.num_parents = ARRAY_SIZE(mux_audio_sync_clk),	\
+	};
+
+AUDIO_SYNC_CLK(audio0, 0);
+AUDIO_SYNC_CLK(audio1, 1);
+AUDIO_SYNC_CLK(audio2, 2);
+AUDIO_SYNC_CLK(audio3, 3);
+AUDIO_SYNC_CLK(audio4, 4);
+AUDIO_SYNC_CLK(audio5, 5);
+
+static struct clk *tegra_clk_audio_list[] = {
+	&tegra_audio0,
+	&tegra_audio1,
+	&tegra_audio2,
+	&tegra_audio3,
+	&tegra_audio4,
+	&tegra_audio5,	/* SPDIF */
+};
+
+#define AUDIO_SYNC_2X_CLK(_name, _index)			\
+	static const char *_name##_parent_names[] = {		\
+		"tegra_" #_name,				\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		&tegra_##_name,					\
+	};							\
+	static struct clk tegra_##_name##_2x;			\
+	static struct clk_tegra tegra_##_name##_2x_hw = {	\
+		.hw = {						\
+			.clk = &tegra_##_name##_2x,		\
+		},						\
+		.flags = PERIPH_NO_RESET,			\
+		.max_rate = 48000000,				\
+		.reg = 0x49C,					\
+		.reg_shift = 24 + (_index),			\
+		.u.periph = {					\
+			.clk_num = 113 + (_index),		\
+		},						\
+	};							\
+	static struct clk tegra_##_name##_2x = {		\
+		.name = #_name "_2x",				\
+		.ops = &tegra30_clk_double_ops,			\
+		.hw = &tegra_##_name##_2x_hw.hw,		\
+		.parent_names = _name##_parent_names,		\
+		.parents = _name##_parents,			\
+		.parent = &tegra_##_name,			\
+		.num_parents = 1,				\
+	};
+
+AUDIO_SYNC_2X_CLK(audio0, 0);
+AUDIO_SYNC_2X_CLK(audio1, 1);
+AUDIO_SYNC_2X_CLK(audio2, 2);
+AUDIO_SYNC_2X_CLK(audio3, 3);
+AUDIO_SYNC_2X_CLK(audio4, 4);
+AUDIO_SYNC_2X_CLK(audio5, 5);	/* SPDIF */
+
+static struct clk *tegra_clk_audio_2x_list[] = {
+	&tegra_audio0_2x,
+	&tegra_audio1_2x,
+	&tegra_audio2_2x,
+	&tegra_audio3_2x,
+	&tegra_audio4_2x,
+	&tegra_audio5_2x,	/* SPDIF */
+};
+
+#define MUX_I2S_SPDIF(_id)					\
+static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = {	\
+	"pll_a_out0",						\
+	#_id "_2x",						\
+	"pll_p",						\
+	"clk_m",						\
+};								\
+static struct clk *mux_pllaout0_##_id##_2x_pllp_clkm_p[] = {	\
+	&tegra_pll_a_out0,					\
+	&tegra_##_id##_2x,					\
+	&tegra_pll_p,						\
+	&tegra_clk_m,						\
+};
+
+MUX_I2S_SPDIF(audio0);
+MUX_I2S_SPDIF(audio1);
+MUX_I2S_SPDIF(audio2);
+MUX_I2S_SPDIF(audio3);
+MUX_I2S_SPDIF(audio4);
+MUX_I2S_SPDIF(audio5);		/* SPDIF */
+
+static struct clk tegra_extern1;
+static struct clk tegra_extern2;
+static struct clk tegra_extern3;
+
+/* External clock outputs (through PMC) */
+#define MUX_EXTERN_OUT(_id)					\
+static const char *mux_clkm_clkm2_clkm4_extern##_id[] = {	\
+	"clk_m",						\
+	"clk_m_div2",						\
+	"clk_m_div4",						\
+	"extern" #_id,						\
+};								\
+static struct clk *mux_clkm_clkm2_clkm4_extern##_id##_p[] = {	\
+	&tegra_clk_m,						\
+	&tegra_clk_m_div2,					\
+	&tegra_clk_m_div4,					\
+	&tegra_extern##_id,					\
+};
+
+MUX_EXTERN_OUT(1);
+MUX_EXTERN_OUT(2);
+MUX_EXTERN_OUT(3);
+
+#define CLK_OUT_CLK(_name, _index)					\
+	static struct clk tegra_##_name;				\
+	static struct clk_tegra tegra_##_name##_hw = {			\
+		.hw = {							\
+			.clk = &tegra_##_name,				\
+		},							\
+		.lookup = {						\
+			.dev_id	= #_name,				\
+			.con_id	= "extern" #_index,			\
+		},							\
+		.flags = MUX_CLK_OUT,					\
+		.fixed_rate = 216000000,					\
+		.reg = 0x1a8,						\
+		.u.periph = {						\
+			.clk_num = (_index - 1) * 8 + 2,		\
+		},							\
+	};								\
+	static struct clk tegra_##_name = {				\
+		.name = #_name,						\
+		.ops = &tegra_clk_out_ops,				\
+		.hw = &tegra_##_name##_hw.hw,				\
+		.parent_names = mux_clkm_clkm2_clkm4_extern##_index,	\
+		.parents = mux_clkm_clkm2_clkm4_extern##_index##_p,	\
+		.num_parents = ARRAY_SIZE(mux_clkm_clkm2_clkm4_extern##_index),\
+	};
+
+CLK_OUT_CLK(clk_out_1, 1);
+CLK_OUT_CLK(clk_out_2, 2);
+CLK_OUT_CLK(clk_out_3, 3);
+
+static struct clk *tegra_clk_out_list[] = {
+	&tegra_clk_out_1,
+	&tegra_clk_out_2,
+	&tegra_clk_out_3,
+};
+
+static const char *mux_sclk[] = {
+	"clk_m",
+	"pll_c_out1",
+	"pll_p_out4",
+	"pll_p_out3",
+	"pll_p_out2",
+	"dummy",
+	"clk_32k",
+	"pll_m_out1",
+};
+
+static struct clk *mux_sclk_p[] = {
+	&tegra_clk_m,
+	&tegra_pll_c_out1,
+	&tegra_pll_p_out4,
+	&tegra_pll_p_out3,
+	&tegra_pll_p_out2,
+	NULL,
+	&tegra_clk_32k,
+	&tegra_pll_m_out1,
+};
+
+static struct clk tegra_clk_sclk;
+static struct clk_tegra tegra_clk_sclk_hw = {
+	.hw = {
+		.clk = &tegra_clk_sclk,
+	},
+	.reg = 0x28,
+	.max_rate = 334000000,
+	.min_rate = 40000000,
+};
+
+static struct clk tegra_clk_sclk = {
+	.name = "sclk",
+	.ops = &tegra30_super_ops,
+	.hw = &tegra_clk_sclk_hw.hw,
+	.parent_names = mux_sclk,
+	.parents = mux_sclk_p,
+	.num_parents = ARRAY_SIZE(mux_sclk),
+};
+
+static const char *mux_blink[] = {
+	"clk_32k",
+};
+
+static struct clk *mux_blink_p[] = {
+	&tegra_clk_32k,
+};
+
+static struct clk tegra_clk_blink;
+static struct clk_tegra tegra_clk_blink_hw = {
+	.hw = {
+		.clk = &tegra_clk_blink,
+	},
+	.reg = 0x40,
+	.max_rate = 32768,
+};
+static struct clk tegra_clk_blink = {
+	.name = "blink",
+	.ops = &tegra30_blink_clk_ops,
+	.hw = &tegra_clk_blink_hw.hw,
+	.parent = &tegra_clk_32k,
+	.parent_names = mux_blink,
+	.parents = mux_blink_p,
+	.num_parents = ARRAY_SIZE(mux_blink),
+};
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+	"pll_m",
+	"pll_c",
+	"pll_p",
+	"pll_a_out0",
+};
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+	"pll_p",
+	"pll_c",
+	"pll_m",
+	"clk_m",
+};
+
+static const char *mux_pllp_clkm[] = {
+	"pll_p",
+	"dummy",
+	"dummy",
+	"clk_m",
+};
+
+static const char *mux_pllp_plld_pllc_clkm[] = {
+	"pll_p",
+	"pll_d_out0",
+	"pll_c",
+	"clk_m",
+};
+
+static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+	"pll_p",
+	"pll_m",
+	"pll_d_out0",
+	"pll_a_out0",
+	"pll_c",
+	"pll_d2_out0",
+	"clk_m",
+};
+
+static const char *mux_plla_pllc_pllp_clkm[] = {
+	"pll_a_out0",
+	"dummy",
+	"pll_p",
+	"clk_m"
+};
+
+static const char *mux_pllp_pllc_clk32_clkm[] = {
+	"pll_p",
+	"pll_c",
+	"clk_32k",
+	"clk_m",
+};
+
+static const char *mux_pllp_pllc_clkm_clk32[] = {
+	"pll_p",
+	"pll_c",
+	"clk_m",
+	"clk_32k",
+};
+
+static const char *mux_pllp_pllc_pllm[] = {
+	"pll_p",
+	"pll_c",
+	"pll_m",
+};
+
+static const char *mux_clk_m[] = {
+	"clk_m",
+};
+
+static const char *mux_pllp_out3[] = {
+	"pll_p_out3",
+};
+
+static const char *mux_plld_out0[] = {
+	"pll_d_out0",
+};
+
+static const char *mux_plld_out0_plld2_out0[] = {
+	"pll_d_out0",
+	"pll_d2_out0",
+};
+
+static const char *mux_clk_32k[] = {
+	"clk_32k",
+};
+
+static const char *mux_plla_clk32_pllp_clkm_plle[] = {
+	"pll_a_out0",
+	"clk_32k",
+	"pll_p",
+	"clk_m",
+	"pll_e",
+};
+
+static const char *mux_cclk_g[] = {
+	"clk_m",
+	"pll_c",
+	"clk_32k",
+	"pll_m",
+	"pll_p",
+	"pll_p_out4",
+	"pll_p_out3",
+	"dummy",
+	"pll_x",
+};
+
+static struct clk *mux_pllm_pllc_pllp_plla_p[] = {
+	&tegra_pll_m,
+	&tegra_pll_c,
+	&tegra_pll_p,
+	&tegra_pll_a_out0,
+};
+
+static struct clk *mux_pllp_pllc_pllm_clkm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_pll_m,
+	&tegra_clk_m,
+};
+
+static struct clk *mux_pllp_clkm_p[] = {
+	&tegra_pll_p,
+	NULL,
+	NULL,
+	&tegra_clk_m,
+};
+
+static struct clk *mux_pllp_plld_pllc_clkm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_d_out0,
+	&tegra_pll_c,
+	&tegra_clk_m,
+};
+
+static struct clk *mux_pllp_pllm_plld_plla_pllc_plld2_clkm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_m,
+	&tegra_pll_d_out0,
+	&tegra_pll_a_out0,
+	&tegra_pll_c,
+	&tegra_pll_d2_out0,
+	&tegra_clk_m,
+};
+
+static struct clk *mux_plla_pllc_pllp_clkm_p[] = {
+	&tegra_pll_a_out0,
+	NULL,
+	&tegra_pll_p,
+	&tegra_clk_m,
+};
+
+static struct clk *mux_pllp_pllc_clk32_clkm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_clk_32k,
+	&tegra_clk_m,
+};
+
+static struct clk *mux_pllp_pllc_clkm_clk32_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_clk_m,
+	&tegra_clk_32k,
+};
+
+static struct clk *mux_pllp_pllc_pllm_p[] = {
+	&tegra_pll_p,
+	&tegra_pll_c,
+	&tegra_pll_m,
+};
+
+static struct clk *mux_clk_m_p[] = {
+	&tegra_clk_m,
+};
+
+static struct clk *mux_pllp_out3_p[] = {
+	&tegra_pll_p_out3,
+};
+
+static struct clk *mux_plld_out0_p[] = {
+	&tegra_pll_d_out0,
+};
+
+static struct clk *mux_plld_out0_plld2_out0_p[] = {
+	&tegra_pll_d_out0,
+	&tegra_pll_d2_out0,
+};
+
+static struct clk *mux_clk_32k_p[] = {
+	&tegra_clk_32k,
+};
+
+static struct clk *mux_plla_clk32_pllp_clkm_plle_p[] = {
+	&tegra_pll_a_out0,
+	&tegra_clk_32k,
+	&tegra_pll_p,
+	&tegra_clk_m,
+	&tegra_pll_e,
+};
+
+static struct clk *mux_cclk_g_p[] = {
+	&tegra_clk_m,
+	&tegra_pll_c,
+	&tegra_clk_32k,
+	&tegra_pll_m,
+	&tegra_pll_p,
+	&tegra_pll_p_out4,
+	&tegra_pll_p_out3,
+	NULL,
+	&tegra_pll_x,
+};
+
+static struct clk tegra_clk_cclk_g;
+static struct clk_tegra tegra_clk_cclk_g_hw = {
+	.hw = {
+		.clk = &tegra_clk_cclk_g,
+	},
+	.flags = DIV_U71 | DIV_U71_INT,
+	.reg = 0x368,
+	.max_rate = 1700000000,
+};
+static struct clk tegra_clk_cclk_g = {
+	.name = "cclk_g",
+	.ops = &tegra30_super_ops,
+	.hw = &tegra_clk_cclk_g_hw.hw,
+	.parent_names = mux_cclk_g,
+	.parents = mux_cclk_g_p,
+	.num_parents = ARRAY_SIZE(mux_cclk_g),
+};
+
+static const char *mux_twd[] = {
+	"cclk_g",
+};
+
+static struct clk *mux_twd_p[] = {
+	&tegra_clk_cclk_g,
+};
+
+static struct clk tegra30_clk_twd;
+static struct clk_tegra tegra30_clk_twd_hw = {
+	.hw = {
+		.clk = &tegra30_clk_twd,
+	},
+	.max_rate = 1400000000,
+	.mul = 1,
+	.div = 2,
+};
+
+static struct clk tegra30_clk_twd = {
+	.name = "twd",
+	.ops = &tegra30_twd_ops,
+	.hw = &tegra30_clk_twd_hw.hw,
+	.parent = &tegra_clk_cclk_g,
+	.parent_names = mux_twd,
+	.parents = mux_twd_p,
+	.num_parents = ARRAY_SIZE(mux_twd),
+};
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg,	\
+		_max, _inputs, _flags)	 		\
+	static struct clk tegra_##_name;		\
+	static struct clk_tegra tegra_##_name##_hw = {	\
+		.hw = {					\
+			.clk = &tegra_##_name,		\
+		},					\
+		.lookup = {				\
+			.dev_id	= _dev,			\
+			.con_id	= _con,			\
+		},					\
+		.reg = _reg,				\
+		.flags = _flags,			\
+		.max_rate = _max,			\
+		.u.periph = {				\
+			.clk_num = _clk_num,		\
+		},					\
+		.reset = &tegra30_periph_clk_reset,	\
+	};						\
+	static struct clk tegra_##_name = {		\
+		.name = #_name,				\
+		.ops = &tegra30_periph_clk_ops,		\
+		.hw = &tegra_##_name##_hw.hw,		\
+		.parent_names = _inputs,		\
+		.parents = _inputs##_p,			\
+		.num_parents = ARRAY_SIZE(_inputs),	\
+	};
+
+PERIPH_CLK(apbdma,	"tegra-apbdma",		NULL,	34,	0,	26000000,  mux_clk_m,			0);
+PERIPH_CLK(rtc,		"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB);
+PERIPH_CLK(kbc,		"tegra-kbc",		NULL,	36,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB);
+PERIPH_CLK(timer,	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0);
+PERIPH_CLK(kfuse,	"kfuse-tegra",		NULL,	40,	0,	26000000,  mux_clk_m,			0);
+PERIPH_CLK(fuse,	"fuse-tegra",		"fuse",	39,	0,	26000000,  mux_clk_m,			PERIPH_ON_APB);
+PERIPH_CLK(fuse_burn,	"fuse-tegra",		"fuse_burn",	39,	0,	26000000,  mux_clk_m,		PERIPH_ON_APB);
+PERIPH_CLK(apbif,	"tegra30-ahub",		"apbif", 107,	0,	26000000,  mux_clk_m,			0);
+PERIPH_CLK(i2s0,	"tegra30-i2s.0",	NULL,	30,	0x1d8,	26000000,  mux_pllaout0_audio0_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s1,	"tegra30-i2s.1",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio1_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s2,	"tegra30-i2s.2",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s3,	"tegra30-i2s.3",	NULL,	101,	0x3bc,	26000000,  mux_pllaout0_audio3_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(i2s4,	"tegra30-i2s.4",	NULL,	102,	0x3c0,	26000000,  mux_pllaout0_audio4_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(spdif_out,	"tegra30-spdif",	"spdif_out",	10,	0x108,	100000000, mux_pllaout0_audio5_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(spdif_in,	"tegra30-spdif",	"spdif_in",	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(pwm,		"tegra-pwm",		NULL,	17,	0x110,	432000000, mux_pllp_pllc_clk32_clkm,	MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(d_audio,	"tegra30-ahub",		"d_audio", 106,	0x3d0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(dam0,	"tegra30-dam.0",	NULL,	108,	0x3d8,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(dam1,	"tegra30-dam.1",	NULL,	109,	0x3dc,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(dam2,	"tegra30-dam.2",	NULL,	110,	0x3e0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71);
+PERIPH_CLK(hda,		"tegra30-hda",		"hda",	125,	0x428,	108000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(hda2codec_2x,	"tegra30-hda",	"hda2codec",	111,	0x3e4,	48000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(hda2hdmi,	"tegra30-hda",		"hda2hdmi",	128,	0,	48000000,  mux_clk_m,			0);
+PERIPH_CLK(sbc1,	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc2,	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc3,	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc4,	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc5,	"spi_tegra.4",		NULL,	104,	0x3c8,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sbc6,	"spi_tegra.5",		NULL,	105,	0x3cc,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sata_oob,	"tegra_sata_oob",	NULL,	123,	0x420,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sata,	"tegra_sata",		NULL,	124,	0x424,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(sata_cold,	"tegra_sata_cold",	NULL,	129,	0,	48000000,  mux_clk_m,			0);
+PERIPH_CLK(ndflash,	"tegra_nand",		NULL,	13,	0x160,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(ndspeed,	"tegra_nand_speed",	NULL,	80,	0x3f8,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(vfir,	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(sdmmc1,	"sdhci-tegra.0",	NULL,	14,	0x150,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc2,	"sdhci-tegra.1",	NULL,	9,	0x154,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc3,	"sdhci-tegra.2",	NULL,	69,	0x1bc,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(sdmmc4,	"sdhci-tegra.3",	NULL,	15,	0x164,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
+PERIPH_CLK(vcp,		"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(bsea,	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(bsev,	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(vde,		"vde",			NULL,	61,	0x1c8,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(csite,	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* max rate ??? */
+PERIPH_CLK(la,		"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
+PERIPH_CLK(owr,		"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(nor,		"nor",			NULL,	42,	0x1d0,	127000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(mipi,	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB); /* scales with voltage */
+PERIPH_CLK(i2c1,	"tegra-i2c.0",		"div-clk", 12,	0x124,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c2,	"tegra-i2c.1",		"div-clk", 54,	0x198,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c3,	"tegra-i2c.2",		"div-clk", 67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c4,	"tegra-i2c.3",		"div-clk", 103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c5,	"tegra-i2c.4",		"div-clk", 47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(uarta,	"tegra-uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uartb,	"tegra-uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uartc,	"tegra-uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uartd,	"tegra-uart.3",		NULL,	65,	0x1c0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(uarte,	"tegra-uart.4",		NULL,	66,	0x1c4,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
+PERIPH_CLK(vi,		"tegra_camera",		"vi",	20,	0x148,	425000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(3d,		"3d",			NULL,	24,	0x158,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET);
+PERIPH_CLK(3d2,		"3d2",			NULL,	98,	0x3b0,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET);
+PERIPH_CLK(2d,		"2d",			NULL,	21,	0x15c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE);
+PERIPH_CLK(vi_sensor,	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET);
+PERIPH_CLK(epp,		"epp",			NULL,	19,	0x16c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(mpe,		"mpe",			NULL,	60,	0x170,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(host1x,	"host1x",		NULL,	28,	0x180,	260000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT);
+PERIPH_CLK(cve,		"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(tvo,		"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(dtv,		"dtv",			NULL,	79,	0x1dc,	250000000, mux_clk_m,			0);
+PERIPH_CLK(hdmi,	"hdmi",			NULL,	51,	0x18c,	148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8 | DIV_U71);
+PERIPH_CLK(tvdac,	"tvdac",		NULL,	53,	0x194,	220000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71); /* requires min voltage */
+PERIPH_CLK(disp1,	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8);
+PERIPH_CLK(disp2,	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8);
+PERIPH_CLK(usbd,	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0); /* requires min voltage */
+PERIPH_CLK(usb2,	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0); /* requires min voltage */
+PERIPH_CLK(usb3,	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0); /* requires min voltage */
+PERIPH_CLK(dsia,	"tegradc.0",		"dsia",	48,	0,	500000000, mux_plld_out0,		0);
+PERIPH_CLK(csi,		"tegra_camera",		"csi",	52,	0,	102000000, mux_pllp_out3,		0);
+PERIPH_CLK(isp,		"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0); /* same frequency as VI */
+PERIPH_CLK(csus,	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET);
+PERIPH_CLK(tsensor,	"tegra-tsensor",	NULL,	100,	0x3b8,	216000000, mux_pllp_pllc_clkm_clk32,	MUX | DIV_U71);
+PERIPH_CLK(actmon,	"actmon",		NULL,	119,	0x3e8,	216000000, mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71);
+PERIPH_CLK(extern1,	"extern1",		NULL,	120,	0x3ec,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71);
+PERIPH_CLK(extern2,	"extern2",		NULL,	121,	0x3f0,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71);
+PERIPH_CLK(extern3,	"extern3",		NULL,	122,	0x3f4,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71);
+PERIPH_CLK(i2cslow,	"i2cslow",		NULL,	81,	0x3fc,	26000000,  mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
+PERIPH_CLK(pcie,	"tegra-pcie",		"pcie",	70,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(afi,		"tegra-pcie",		"afi",	72,	0,	250000000, mux_clk_m,			0);
+PERIPH_CLK(se,		"se",			NULL,	127,	0x42c,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT);
+
+static struct clk tegra_dsib;
+static struct clk_tegra tegra_dsib_hw = {
+	.hw = {
+		.clk = &tegra_dsib,
+	},
+	.lookup = {
+		.dev_id	= "tegradc.1",
+		.con_id	= "dsib",
+	},
+	.reg = 0xd0,
+	.flags = MUX | PLLD,
+	.max_rate = 500000000,
+	.u.periph = {
+		.clk_num = 82,
+	},
+	.reset = &tegra30_periph_clk_reset,
+};
+static struct clk tegra_dsib = {
+	.name = "dsib",
+	.ops = &tegra30_dsib_clk_ops,
+	.hw = &tegra_dsib_hw.hw,
+	.parent_names = mux_plld_out0_plld2_out0,
+	.parents = mux_plld_out0_plld2_out0_p,
+	.num_parents = ARRAY_SIZE(mux_plld_out0_plld2_out0),
+};
+
+struct clk *tegra_list_clks[] = {
+	&tegra_apbdma,
+	&tegra_rtc,
+	&tegra_kbc,
+	&tegra_kfuse,
+	&tegra_fuse,
+	&tegra_fuse_burn,
+	&tegra_apbif,
+	&tegra_i2s0,
+	&tegra_i2s1,
+	&tegra_i2s2,
+	&tegra_i2s3,
+	&tegra_i2s4,
+	&tegra_spdif_out,
+	&tegra_spdif_in,
+	&tegra_pwm,
+	&tegra_d_audio,
+	&tegra_dam0,
+	&tegra_dam1,
+	&tegra_dam2,
+	&tegra_hda,
+	&tegra_hda2codec_2x,
+	&tegra_hda2hdmi,
+	&tegra_sbc1,
+	&tegra_sbc2,
+	&tegra_sbc3,
+	&tegra_sbc4,
+	&tegra_sbc5,
+	&tegra_sbc6,
+	&tegra_sata_oob,
+	&tegra_sata,
+	&tegra_sata_cold,
+	&tegra_ndflash,
+	&tegra_ndspeed,
+	&tegra_vfir,
+	&tegra_sdmmc1,
+	&tegra_sdmmc2,
+	&tegra_sdmmc3,
+	&tegra_sdmmc4,
+	&tegra_vcp,
+	&tegra_bsea,
+	&tegra_bsev,
+	&tegra_vde,
+	&tegra_csite,
+	&tegra_la,
+	&tegra_owr,
+	&tegra_nor,
+	&tegra_mipi,
+	&tegra_i2c1,
+	&tegra_i2c2,
+	&tegra_i2c3,
+	&tegra_i2c4,
+	&tegra_i2c5,
+	&tegra_uarta,
+	&tegra_uartb,
+	&tegra_uartc,
+	&tegra_uartd,
+	&tegra_uarte,
+	&tegra_vi,
+	&tegra_3d,
+	&tegra_3d2,
+	&tegra_2d,
+	&tegra_vi_sensor,
+	&tegra_epp,
+	&tegra_mpe,
+	&tegra_host1x,
+	&tegra_cve,
+	&tegra_tvo,
+	&tegra_dtv,
+	&tegra_hdmi,
+	&tegra_tvdac,
+	&tegra_disp1,
+	&tegra_disp2,
+	&tegra_usbd,
+	&tegra_usb2,
+	&tegra_usb3,
+	&tegra_dsia,
+	&tegra_dsib,
+	&tegra_csi,
+	&tegra_isp,
+	&tegra_csus,
+	&tegra_tsensor,
+	&tegra_actmon,
+	&tegra_extern1,
+	&tegra_extern2,
+	&tegra_extern3,
+	&tegra_i2cslow,
+	&tegra_pcie,
+	&tegra_afi,
+	&tegra_se,
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con)	\
+	{					\
+		.name	= _name,		\
+		.lookup	= {			\
+			.dev_id	= _dev,		\
+			.con_id	= _con,		\
+		},				\
+	}
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration.  List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+struct clk_duplicate tegra_clk_duplicates[] = {
+	CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
+	CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
+	CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
+	CLK_DUPLICATE("uartd",  "serial8250.3", NULL),
+	CLK_DUPLICATE("uarte",  "serial8250.4", NULL),
+	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
+	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
+	CLK_DUPLICATE("usbd", "tegra-otg", NULL),
+	CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
+	CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
+	CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
+	CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
+	CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
+	CLK_DUPLICATE("bsev", "nvavp", "bsev"),
+	CLK_DUPLICATE("vde", "tegra-aes", "vde"),
+	CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
+	CLK_DUPLICATE("bsea", "nvavp", "bsea"),
+	CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
+	CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
+	CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
+	CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
+	CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
+	CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
+	CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
+	CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
+	CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
+	CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
+	CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
+	CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
+	CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
+	CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
+	CLK_DUPLICATE("twd", "smp_twd", NULL),
+	CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+	CLK_DUPLICATE("i2s0", NULL, "i2s0"),
+	CLK_DUPLICATE("i2s1", NULL, "i2s1"),
+	CLK_DUPLICATE("i2s2", NULL, "i2s2"),
+	CLK_DUPLICATE("i2s3", NULL, "i2s3"),
+	CLK_DUPLICATE("i2s4", NULL, "i2s4"),
+	CLK_DUPLICATE("dam0", NULL, "dam0"),
+	CLK_DUPLICATE("dam1", NULL, "dam1"),
+	CLK_DUPLICATE("dam2", NULL, "dam2"),
+	CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"),
+};
+
+struct clk *tegra_ptr_clks[] = {
+	&tegra_clk_32k,
+	&tegra_clk_m,
+	&tegra_clk_m_div2,
+	&tegra_clk_m_div4,
+	&tegra_pll_ref,
+	&tegra_pll_m,
+	&tegra_pll_m_out1,
+	&tegra_pll_c,
+	&tegra_pll_c_out1,
+	&tegra_pll_p,
+	&tegra_pll_p_out1,
+	&tegra_pll_p_out2,
+	&tegra_pll_p_out3,
+	&tegra_pll_p_out4,
+	&tegra_pll_a,
+	&tegra_pll_a_out0,
+	&tegra_pll_d,
+	&tegra_pll_d_out0,
+	&tegra_pll_d2,
+	&tegra_pll_d2_out0,
+	&tegra_pll_u,
+	&tegra_pll_x,
+	&tegra_pll_x_out0,
+	&tegra_pll_e,
+	&tegra_clk_cclk_g,
+	&tegra_cml0,
+	&tegra_cml1,
+	&tegra_pciex,
+	&tegra_clk_sclk,
+	&tegra_clk_blink,
+	&tegra30_clk_twd,
+};
+
+static void tegra30_init_one_clock(struct clk *c)
+{
+	struct clk_tegra *clk = to_clk_tegra(c->hw);
+	__clk_init(NULL, c);
+	INIT_LIST_HEAD(&clk->shared_bus_list);
+	if (!clk->lookup.dev_id && !clk->lookup.con_id)
+		clk->lookup.con_id = c->name;
+	clk->lookup.clk = c;
+	clkdev_add(&clk->lookup);
+	tegra_clk_add(c);
+}
+
+void __init tegra30_init_clocks(void)
+{
+	int i;
+	struct clk *c;
+
+	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
+		tegra30_init_one_clock(tegra_ptr_clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
+		tegra30_init_one_clock(tegra_list_clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
+		if (!c) {
+			pr_err("%s: Unknown duplicate clock %s\n", __func__,
+				tegra_clk_duplicates[i].name);
+			continue;
+		}
+
+		tegra_clk_duplicates[i].lookup.clk = c;
+		clkdev_add(&tegra_clk_duplicates[i].lookup);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
+		tegra30_init_one_clock(tegra_sync_source_list[i]);
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
+		tegra30_init_one_clock(tegra_clk_audio_list[i]);
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
+		tegra30_init_one_clock(tegra_clk_audio_2x_list[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
+		tegra30_init_one_clock(tegra_clk_out_list[i]);
+
+	tegra30_cpu_car_ops_init();
+}
diff --git a/arch/arm/mach-tegra/tegra_cpu_car.h b/arch/arm/mach-tegra/tegra_cpu_car.h
new file mode 100644
index 000000000000..30d063ad2bef
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra_cpu_car.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_CPU_CAR_H
+#define __MACH_TEGRA_CPU_CAR_H
+
+/*
+ * Tegra CPU clock and reset control ops
+ *
+ * wait_for_reset:
+ *	keep waiting until the CPU in reset state
+ * put_in_reset:
+ *	put the CPU in reset state
+ * out_of_reset:
+ *	release the CPU from reset state
+ * enable_clock:
+ *	CPU clock un-gate
+ * disable_clock:
+ *	CPU clock gate
+ */
+struct tegra_cpu_car_ops {
+	void (*wait_for_reset)(u32 cpu);
+	void (*put_in_reset)(u32 cpu);
+	void (*out_of_reset)(u32 cpu);
+	void (*enable_clock)(u32 cpu);
+	void (*disable_clock)(u32 cpu);
+};
+
+extern struct tegra_cpu_car_ops *tegra_cpu_car_ops;
+
+static inline void tegra_wait_cpu_in_reset(u32 cpu)
+{
+	if (WARN_ON(!tegra_cpu_car_ops->wait_for_reset))
+		return;
+
+	tegra_cpu_car_ops->wait_for_reset(cpu);
+}
+
+static inline void tegra_put_cpu_in_reset(u32 cpu)
+{
+	if (WARN_ON(!tegra_cpu_car_ops->put_in_reset))
+		return;
+
+	tegra_cpu_car_ops->put_in_reset(cpu);
+}
+
+static inline void tegra_cpu_out_of_reset(u32 cpu)
+{
+	if (WARN_ON(!tegra_cpu_car_ops->out_of_reset))
+		return;
+
+	tegra_cpu_car_ops->out_of_reset(cpu);
+}
+
+static inline void tegra_enable_cpu_clock(u32 cpu)
+{
+	if (WARN_ON(!tegra_cpu_car_ops->enable_clock))
+		return;
+
+	tegra_cpu_car_ops->enable_clock(cpu);
+}
+
+static inline void tegra_disable_cpu_clock(u32 cpu)
+{
+	if (WARN_ON(!tegra_cpu_car_ops->disable_clock))
+		return;
+
+	tegra_cpu_car_ops->disable_clock(cpu);
+}
+
+void tegra20_cpu_car_ops_init(void);
+void tegra30_cpu_car_ops_init(void);
+
+#endif /* __MACH_TEGRA_CPU_CAR_H */
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 57b5bdc13b9b..eccdce983043 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -33,7 +33,6 @@
 
 #include <mach/iomap.h>
 #include <mach/irqs.h>
-#include <mach/suspend.h>
 
 #include "board.h"
 #include "clock.h"
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
deleted file mode 100644
index 022b33a05c3a..000000000000
--- a/arch/arm/mach-tegra/usb_phy.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/*
- * arch/arm/mach-tegra/usb_phy.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *	Benoit Goby <benoit@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/resource.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <asm/mach-types.h>
-#include <mach/gpio-tegra.h>
-#include <mach/usb_phy.h>
-#include <mach/iomap.h>
-
-#define ULPI_VIEWPORT		0x170
-
-#define USB_PORTSC1		0x184
-#define   USB_PORTSC1_PTS(x)	(((x) & 0x3) << 30)
-#define   USB_PORTSC1_PSPD(x)	(((x) & 0x3) << 26)
-#define   USB_PORTSC1_PHCD	(1 << 23)
-#define   USB_PORTSC1_WKOC	(1 << 22)
-#define   USB_PORTSC1_WKDS	(1 << 21)
-#define   USB_PORTSC1_WKCN	(1 << 20)
-#define   USB_PORTSC1_PTC(x)	(((x) & 0xf) << 16)
-#define   USB_PORTSC1_PP	(1 << 12)
-#define   USB_PORTSC1_SUSP	(1 << 7)
-#define   USB_PORTSC1_PE	(1 << 2)
-#define   USB_PORTSC1_CCS	(1 << 0)
-
-#define USB_SUSP_CTRL		0x400
-#define   USB_WAKE_ON_CNNT_EN_DEV	(1 << 3)
-#define   USB_WAKE_ON_DISCON_EN_DEV	(1 << 4)
-#define   USB_SUSP_CLR		(1 << 5)
-#define   USB_PHY_CLK_VALID	(1 << 7)
-#define   UTMIP_RESET			(1 << 11)
-#define   UHSIC_RESET			(1 << 11)
-#define   UTMIP_PHY_ENABLE		(1 << 12)
-#define   ULPI_PHY_ENABLE	(1 << 13)
-#define   USB_SUSP_SET		(1 << 14)
-#define   USB_WAKEUP_DEBOUNCE_COUNT(x)	(((x) & 0x7) << 16)
-
-#define USB1_LEGACY_CTRL	0x410
-#define   USB1_NO_LEGACY_MODE			(1 << 0)
-#define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
-#define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
-#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
-						(1 << 1)
-#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
-#define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
-
-#define ULPI_TIMING_CTRL_0	0x424
-#define   ULPI_OUTPUT_PINMUX_BYP	(1 << 10)
-#define   ULPI_CLKOUT_PINMUX_BYP	(1 << 11)
-
-#define ULPI_TIMING_CTRL_1	0x428
-#define   ULPI_DATA_TRIMMER_LOAD	(1 << 0)
-#define   ULPI_DATA_TRIMMER_SEL(x)	(((x) & 0x7) << 1)
-#define   ULPI_STPDIRNXT_TRIMMER_LOAD	(1 << 16)
-#define   ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
-#define   ULPI_DIR_TRIMMER_LOAD		(1 << 24)
-#define   ULPI_DIR_TRIMMER_SEL(x)	(((x) & 0x7) << 25)
-
-#define UTMIP_PLL_CFG1		0x804
-#define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
-#define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
-
-#define UTMIP_XCVR_CFG0		0x808
-#define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
-#define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
-#define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
-#define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
-#define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
-#define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
-#define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
-
-#define UTMIP_BIAS_CFG0		0x80c
-#define   UTMIP_OTGPD			(1 << 11)
-#define   UTMIP_BIASPD			(1 << 10)
-
-#define UTMIP_HSRX_CFG0		0x810
-#define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
-#define   UTMIP_IDLE_WAIT(x)		(((x) & 0x1f) << 15)
-
-#define UTMIP_HSRX_CFG1		0x814
-#define   UTMIP_HS_SYNC_START_DLY(x)	(((x) & 0x1f) << 1)
-
-#define UTMIP_TX_CFG0		0x820
-#define   UTMIP_FS_PREABMLE_J		(1 << 19)
-#define   UTMIP_HS_DISCON_DISABLE	(1 << 8)
-
-#define UTMIP_MISC_CFG0		0x824
-#define   UTMIP_DPDM_OBSERVE		(1 << 26)
-#define   UTMIP_DPDM_OBSERVE_SEL(x)	(((x) & 0xf) << 27)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_J	UTMIP_DPDM_OBSERVE_SEL(0xf)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_K	UTMIP_DPDM_OBSERVE_SEL(0xe)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
-#define   UTMIP_SUSPEND_EXIT_ON_EDGE	(1 << 22)
-
-#define UTMIP_MISC_CFG1		0x828
-#define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)	(((x) & 0x1f) << 18)
-#define   UTMIP_PLLU_STABLE_COUNT(x)	(((x) & 0xfff) << 6)
-
-#define UTMIP_DEBOUNCE_CFG0	0x82c
-#define   UTMIP_BIAS_DEBOUNCE_A(x)	(((x) & 0xffff) << 0)
-
-#define UTMIP_BAT_CHRG_CFG0	0x830
-#define   UTMIP_PD_CHRG			(1 << 0)
-
-#define UTMIP_SPARE_CFG0	0x834
-#define   FUSE_SETUP_SEL		(1 << 3)
-
-#define UTMIP_XCVR_CFG1		0x838
-#define   UTMIP_FORCE_PDDISC_POWERDOWN	(1 << 0)
-#define   UTMIP_FORCE_PDCHRP_POWERDOWN	(1 << 2)
-#define   UTMIP_FORCE_PDDR_POWERDOWN	(1 << 4)
-#define   UTMIP_XCVR_TERM_RANGE_ADJ(x)	(((x) & 0xf) << 18)
-
-#define UTMIP_BIAS_CFG1		0x83c
-#define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
-
-static DEFINE_SPINLOCK(utmip_pad_lock);
-static int utmip_pad_count;
-
-struct tegra_xtal_freq {
-	int freq;
-	u8 enable_delay;
-	u8 stable_count;
-	u8 active_delay;
-	u8 xtal_freq_count;
-	u16 debounce;
-};
-
-static const struct tegra_xtal_freq tegra_freq_table[] = {
-	{
-		.freq = 12000000,
-		.enable_delay = 0x02,
-		.stable_count = 0x2F,
-		.active_delay = 0x04,
-		.xtal_freq_count = 0x76,
-		.debounce = 0x7530,
-	},
-	{
-		.freq = 13000000,
-		.enable_delay = 0x02,
-		.stable_count = 0x33,
-		.active_delay = 0x05,
-		.xtal_freq_count = 0x7F,
-		.debounce = 0x7EF4,
-	},
-	{
-		.freq = 19200000,
-		.enable_delay = 0x03,
-		.stable_count = 0x4B,
-		.active_delay = 0x06,
-		.xtal_freq_count = 0xBB,
-		.debounce = 0xBB80,
-	},
-	{
-		.freq = 26000000,
-		.enable_delay = 0x04,
-		.stable_count = 0x66,
-		.active_delay = 0x09,
-		.xtal_freq_count = 0xFE,
-		.debounce = 0xFDE8,
-	},
-};
-
-static struct tegra_utmip_config utmip_default[] = {
-	[0] = {
-		.hssync_start_delay = 9,
-		.idle_wait_delay = 17,
-		.elastic_limit = 16,
-		.term_range_adj = 6,
-		.xcvr_setup = 9,
-		.xcvr_lsfslew = 1,
-		.xcvr_lsrslew = 1,
-	},
-	[2] = {
-		.hssync_start_delay = 9,
-		.idle_wait_delay = 17,
-		.elastic_limit = 16,
-		.term_range_adj = 6,
-		.xcvr_setup = 9,
-		.xcvr_lsfslew = 2,
-		.xcvr_lsrslew = 2,
-	},
-};
-
-static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
-{
-	return (phy->instance == 1);
-}
-
-static int utmip_pad_open(struct tegra_usb_phy *phy)
-{
-	phy->pad_clk = clk_get_sys("utmip-pad", NULL);
-	if (IS_ERR(phy->pad_clk)) {
-		pr_err("%s: can't get utmip pad clock\n", __func__);
-		return PTR_ERR(phy->pad_clk);
-	}
-
-	if (phy->instance == 0) {
-		phy->pad_regs = phy->regs;
-	} else {
-		phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
-		if (!phy->pad_regs) {
-			pr_err("%s: can't remap usb registers\n", __func__);
-			clk_put(phy->pad_clk);
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-static void utmip_pad_close(struct tegra_usb_phy *phy)
-{
-	if (phy->instance != 0)
-		iounmap(phy->pad_regs);
-	clk_put(phy->pad_clk);
-}
-
-static void utmip_pad_power_on(struct tegra_usb_phy *phy)
-{
-	unsigned long val, flags;
-	void __iomem *base = phy->pad_regs;
-
-	clk_prepare_enable(phy->pad_clk);
-
-	spin_lock_irqsave(&utmip_pad_lock, flags);
-
-	if (utmip_pad_count++ == 0) {
-		val = readl(base + UTMIP_BIAS_CFG0);
-		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
-		writel(val, base + UTMIP_BIAS_CFG0);
-	}
-
-	spin_unlock_irqrestore(&utmip_pad_lock, flags);
-
-	clk_disable_unprepare(phy->pad_clk);
-}
-
-static int utmip_pad_power_off(struct tegra_usb_phy *phy)
-{
-	unsigned long val, flags;
-	void __iomem *base = phy->pad_regs;
-
-	if (!utmip_pad_count) {
-		pr_err("%s: utmip pad already powered off\n", __func__);
-		return -EINVAL;
-	}
-
-	clk_prepare_enable(phy->pad_clk);
-
-	spin_lock_irqsave(&utmip_pad_lock, flags);
-
-	if (--utmip_pad_count == 0) {
-		val = readl(base + UTMIP_BIAS_CFG0);
-		val |= UTMIP_OTGPD | UTMIP_BIASPD;
-		writel(val, base + UTMIP_BIAS_CFG0);
-	}
-
-	spin_unlock_irqrestore(&utmip_pad_lock, flags);
-
-	clk_disable_unprepare(phy->pad_clk);
-
-	return 0;
-}
-
-static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
-{
-	unsigned long timeout = 2000;
-	do {
-		if ((readl(reg) & mask) == result)
-			return 0;
-		udelay(1);
-		timeout--;
-	} while (timeout);
-	return -1;
-}
-
-static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	if (phy->instance == 0) {
-		val = readl(base + USB_SUSP_CTRL);
-		val |= USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
-
-		udelay(10);
-
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_PORTSC1);
-		val |= USB_PORTSC1_PHCD;
-		writel(val, base + USB_PORTSC1);
-	}
-
-	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
-		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
-}
-
-static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	if (phy->instance == 0) {
-		val = readl(base + USB_SUSP_CTRL);
-		val |= USB_SUSP_CLR;
-		writel(val, base + USB_SUSP_CTRL);
-
-		udelay(10);
-
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_SUSP_CLR;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_PORTSC1);
-		val &= ~USB_PORTSC1_PHCD;
-		writel(val, base + USB_PORTSC1);
-	}
-
-	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
-						     USB_PHY_CLK_VALID))
-		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
-}
-
-static int utmi_phy_power_on(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-	struct tegra_utmip_config *config = phy->config;
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	if (phy->instance == 0) {
-		val = readl(base + USB1_LEGACY_CTRL);
-		val |= USB1_NO_LEGACY_MODE;
-		writel(val, base + USB1_LEGACY_CTRL);
-	}
-
-	val = readl(base + UTMIP_TX_CFG0);
-	val &= ~UTMIP_FS_PREABMLE_J;
-	writel(val, base + UTMIP_TX_CFG0);
-
-	val = readl(base + UTMIP_HSRX_CFG0);
-	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
-	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
-	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
-	writel(val, base + UTMIP_HSRX_CFG0);
-
-	val = readl(base + UTMIP_HSRX_CFG1);
-	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
-	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
-	writel(val, base + UTMIP_HSRX_CFG1);
-
-	val = readl(base + UTMIP_DEBOUNCE_CFG0);
-	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
-	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
-	writel(val, base + UTMIP_DEBOUNCE_CFG0);
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
-	writel(val, base + UTMIP_MISC_CFG0);
-
-	val = readl(base + UTMIP_MISC_CFG1);
-	val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
-	val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
-		UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
-	writel(val, base + UTMIP_MISC_CFG1);
-
-	val = readl(base + UTMIP_PLL_CFG1);
-	val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
-	val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
-		UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
-	writel(val, base + UTMIP_PLL_CFG1);
-
-	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	utmip_pad_power_on(phy);
-
-	val = readl(base + UTMIP_XCVR_CFG0);
-	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
-		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
-		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
-		 UTMIP_XCVR_HSSLEW_MSB(~0));
-	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
-	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
-	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
-	writel(val, base + UTMIP_XCVR_CFG0);
-
-	val = readl(base + UTMIP_XCVR_CFG1);
-	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
-		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
-	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
-	writel(val, base + UTMIP_XCVR_CFG1);
-
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
-	val &= ~UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
-
-	val = readl(base + UTMIP_BIAS_CFG1);
-	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
-	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
-	writel(val, base + UTMIP_BIAS_CFG1);
-
-	if (phy->instance == 0) {
-		val = readl(base + UTMIP_SPARE_CFG0);
-		if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
-			val &= ~FUSE_SETUP_SEL;
-		else
-			val |= FUSE_SETUP_SEL;
-		writel(val, base + UTMIP_SPARE_CFG0);
-	}
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_SUSP_CTRL);
-		val |= UTMIP_PHY_ENABLE;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	val = readl(base + USB_SUSP_CTRL);
-	val &= ~UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	if (phy->instance == 0) {
-		val = readl(base + USB1_LEGACY_CTRL);
-		val &= ~USB1_VBUS_SENSE_CTL_MASK;
-		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
-		writel(val, base + USB1_LEGACY_CTRL);
-
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	utmi_phy_clk_enable(phy);
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_PORTSC1);
-		val &= ~USB_PORTSC1_PTS(~0);
-		writel(val, base + USB_PORTSC1);
-	}
-
-	return 0;
-}
-
-static void utmi_phy_power_off(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	utmi_phy_clk_disable(phy);
-
-	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
-		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
-	val |= UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
-
-	val = readl(base + UTMIP_XCVR_CFG0);
-	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
-	       UTMIP_FORCE_PDZI_POWERDOWN;
-	writel(val, base + UTMIP_XCVR_CFG0);
-
-	val = readl(base + UTMIP_XCVR_CFG1);
-	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
-	       UTMIP_FORCE_PDDR_POWERDOWN;
-	writel(val, base + UTMIP_XCVR_CFG1);
-
-	utmip_pad_power_off(phy);
-}
-
-static void utmi_phy_preresume(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_TX_CFG0);
-	val |= UTMIP_HS_DISCON_DISABLE;
-	writel(val, base + UTMIP_TX_CFG0);
-}
-
-static void utmi_phy_postresume(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_TX_CFG0);
-	val &= ~UTMIP_HS_DISCON_DISABLE;
-	writel(val, base + UTMIP_TX_CFG0);
-}
-
-static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
-				   enum tegra_usb_phy_port_speed port_speed)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
-	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
-		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
-	else
-		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
-	writel(val, base + UTMIP_MISC_CFG0);
-	udelay(1);
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val |= UTMIP_DPDM_OBSERVE;
-	writel(val, base + UTMIP_MISC_CFG0);
-	udelay(10);
-}
-
-static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val &= ~UTMIP_DPDM_OBSERVE;
-	writel(val, base + UTMIP_MISC_CFG0);
-	udelay(10);
-}
-
-static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
-{
-	int ret;
-	unsigned long val;
-	void __iomem *base = phy->regs;
-	struct tegra_ulpi_config *config = phy->config;
-
-	gpio_direction_output(config->reset_gpio, 0);
-	msleep(5);
-	gpio_direction_output(config->reset_gpio, 1);
-
-	clk_prepare_enable(phy->clk);
-	msleep(1);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= UHSIC_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	val = readl(base + ULPI_TIMING_CTRL_0);
-	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
-	writel(val, base + ULPI_TIMING_CTRL_0);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= ULPI_PHY_ENABLE;
-	writel(val, base + USB_SUSP_CTRL);
-
-	val = 0;
-	writel(val, base + ULPI_TIMING_CTRL_1);
-
-	val |= ULPI_DATA_TRIMMER_SEL(4);
-	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
-	val |= ULPI_DIR_TRIMMER_SEL(4);
-	writel(val, base + ULPI_TIMING_CTRL_1);
-	udelay(10);
-
-	val |= ULPI_DATA_TRIMMER_LOAD;
-	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
-	val |= ULPI_DIR_TRIMMER_LOAD;
-	writel(val, base + ULPI_TIMING_CTRL_1);
-
-	/* Fix VbusInvalid due to floating VBUS */
-	ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
-	if (ret) {
-		pr_err("%s: ulpi write failed\n", __func__);
-		return ret;
-	}
-
-	ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
-	if (ret) {
-		pr_err("%s: ulpi write failed\n", __func__);
-		return ret;
-	}
-
-	val = readl(base + USB_PORTSC1);
-	val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
-	writel(val, base + USB_PORTSC1);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= USB_SUSP_CLR;
-	writel(val, base + USB_SUSP_CTRL);
-	udelay(100);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val &= ~USB_SUSP_CLR;
-	writel(val, base + USB_SUSP_CTRL);
-
-	return 0;
-}
-
-static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-	struct tegra_ulpi_config *config = phy->config;
-
-	/* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
-	 * Controller to immediately bring the ULPI PHY out of low power
-	 */
-	val = readl(base + USB_PORTSC1);
-	val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
-	writel(val, base + USB_PORTSC1);
-
-	gpio_direction_output(config->reset_gpio, 0);
-	clk_disable(phy->clk);
-}
-
-struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
-	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
-{
-	struct tegra_usb_phy *phy;
-	struct tegra_ulpi_config *ulpi_config;
-	unsigned long parent_rate;
-	int i;
-	int err;
-
-	phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
-	if (!phy)
-		return ERR_PTR(-ENOMEM);
-
-	phy->instance = instance;
-	phy->regs = regs;
-	phy->config = config;
-	phy->mode = phy_mode;
-
-	if (!phy->config) {
-		if (phy_is_ulpi(phy)) {
-			pr_err("%s: ulpi phy configuration missing", __func__);
-			err = -EINVAL;
-			goto err0;
-		} else {
-			phy->config = &utmip_default[instance];
-		}
-	}
-
-	phy->pll_u = clk_get_sys(NULL, "pll_u");
-	if (IS_ERR(phy->pll_u)) {
-		pr_err("Can't get pll_u clock\n");
-		err = PTR_ERR(phy->pll_u);
-		goto err0;
-	}
-	clk_prepare_enable(phy->pll_u);
-
-	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
-	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
-		if (tegra_freq_table[i].freq == parent_rate) {
-			phy->freq = &tegra_freq_table[i];
-			break;
-		}
-	}
-	if (!phy->freq) {
-		pr_err("invalid pll_u parent rate %ld\n", parent_rate);
-		err = -EINVAL;
-		goto err1;
-	}
-
-	if (phy_is_ulpi(phy)) {
-		ulpi_config = config;
-		phy->clk = clk_get_sys(NULL, ulpi_config->clk);
-		if (IS_ERR(phy->clk)) {
-			pr_err("%s: can't get ulpi clock\n", __func__);
-			err = -ENXIO;
-			goto err1;
-		}
-		if (!gpio_is_valid(ulpi_config->reset_gpio))
-			ulpi_config->reset_gpio =
-				of_get_named_gpio(dev->of_node,
-						  "nvidia,phy-reset-gpio", 0);
-		if (!gpio_is_valid(ulpi_config->reset_gpio)) {
-			pr_err("%s: invalid reset gpio: %d\n", __func__,
-			       ulpi_config->reset_gpio);
-			err = -EINVAL;
-			goto err1;
-		}
-		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
-		gpio_direction_output(ulpi_config->reset_gpio, 0);
-		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
-		phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
-	} else {
-		err = utmip_pad_open(phy);
-		if (err < 0)
-			goto err1;
-	}
-
-	return phy;
-
-err1:
-	clk_disable_unprepare(phy->pll_u);
-	clk_put(phy->pll_u);
-err0:
-	kfree(phy);
-	return ERR_PTR(err);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
-
-int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
-{
-	if (phy_is_ulpi(phy))
-		return ulpi_phy_power_on(phy);
-	else
-		return utmi_phy_power_on(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on);
-
-void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
-{
-	if (phy_is_ulpi(phy))
-		ulpi_phy_power_off(phy);
-	else
-		utmi_phy_power_off(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off);
-
-void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_preresume(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
-
-void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_postresume(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
-
-void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
-				 enum tegra_usb_phy_port_speed port_speed)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_restore_start(phy, port_speed);
-}
-EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
-
-void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_restore_end(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
-
-void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_clk_disable(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable);
-
-void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_clk_enable(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
-
-void tegra_usb_phy_close(struct tegra_usb_phy *phy)
-{
-	if (phy_is_ulpi(phy))
-		clk_put(phy->clk);
-	else
-		utmip_pad_close(phy);
-	clk_disable_unprepare(phy->pll_u);
-	clk_put(phy->pll_u);
-	kfree(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_close);
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 54d8f34fdee5..f7e12ede008c 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_U300
 
-menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+menu "ST-Ericsson AB U300/U335 Platform"
 
 comment "ST-Ericsson Mobile Platform Products"
 
@@ -10,46 +10,7 @@ config MACH_U300
 	select PINCTRL_U300
 	select PINCTRL_COH901
 
-comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
-
-choice
-	prompt "U300/U330/U335/U365 system type"
-	default MACH_U300_BS2X
-	---help---
-	You need to select the target system, i.e. the
-	U300/U330/U335/U365 board that you want to compile your kernel
-	for.
-
-config MACH_U300_BS2X
-	bool "S26/S26/B25/B26 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S26/S25 test products. (Also works on
-		B26/B25 big boards.)
-
-config MACH_U300_BS330
-	bool "S330/B330 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S330/B330 test products.
-
-config MACH_U300_BS335
-	bool "S335/B335 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S335/B335 test products.
-
-config MACH_U300_BS365
-	bool "S365/B365 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S365/B365 test products.
-
-endchoice
+comment "ST-Ericsson U300/U335 Feature Selections"
 
 config U300_DEBUG
 	bool "Debug support for U300"
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 7e47d37aeb0e..5a86c58da396 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -7,7 +7,6 @@ obj-m		:=
 obj-n		:=
 obj-		:=
 
-obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_I2C_STU300)          += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 03acf1883ec7..b8efac4daed8 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -3,7 +3,7 @@
  * arch/arm/mach-u300/core.c
  *
  *
- * Copyright (C) 2007-2010 ST-Ericsson SA
+ * Copyright (C) 2007-2012 ST-Ericsson SA
  * License terms: GNU General Public License (GPL) version 2
  * Core platform support, IRQ handling and device definitions.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -31,23 +31,26 @@
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-u300.h>
+#include <linux/platform_data/pinctrl-coh901.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
 
 #include <mach/coh901318.h>
 #include <mach/hardware.h>
 #include <mach/syscon.h>
-#include <mach/dma_channels.h>
-#include <mach/gpio-u300.h>
+#include <mach/irqs.h>
 
+#include "timer.h"
 #include "spi.h"
 #include "i2c.h"
 #include "u300-gpio.h"
+#include "dma_channels.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -76,7 +79,7 @@ static struct map_desc u300_io_desc[] __initdata = {
 	},
 };
 
-void __init u300_map_io(void)
+static void __init u300_map_io(void)
 {
 	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
 	/* We enable a real big DMA buffer if need be. */
@@ -101,7 +104,6 @@ static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
 	{ IRQ_U300_UART0 }, &uart0_plat_data);
 
 /* The U335 have an additional UART1 on the APP CPU */
-#ifdef CONFIG_MACH_U300_BS335
 static struct amba_pl011_data uart1_plat_data = {
 #ifdef CONFIG_COH901318
 	.dma_filter = coh901318_filter_id,
@@ -113,7 +115,6 @@ static struct amba_pl011_data uart1_plat_data = {
 /* Fast device at 0x7000 offset */
 static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
 	{ IRQ_U300_UART1 }, &uart1_plat_data);
-#endif
 
 /* AHB device at 0x4000 offset */
 static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
@@ -152,9 +153,7 @@ static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
  */
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,
-#ifdef CONFIG_MACH_U300_BS335
 	&uart1_device,
-#endif
 	&pl022_device,
 	&pl172_device,
 	&mmcsd_device,
@@ -188,7 +187,6 @@ static struct resource gpio_resources[] = {
 		.end   = IRQ_U300_GPIO_PORT2,
 		.flags = IORESOURCE_IRQ,
 	},
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
 	{
 		.name  = "gpio3",
 		.start = IRQ_U300_GPIO_PORT3,
@@ -201,8 +199,6 @@ static struct resource gpio_resources[] = {
 		.end   = IRQ_U300_GPIO_PORT4,
 		.flags = IORESOURCE_IRQ,
 	},
-#endif
-#ifdef CONFIG_MACH_U300_BS335
 	{
 		.name  = "gpio5",
 		.start = IRQ_U300_GPIO_PORT5,
@@ -215,7 +211,6 @@ static struct resource gpio_resources[] = {
 		.end   = IRQ_U300_GPIO_PORT6,
 		.flags = IORESOURCE_IRQ,
 	},
-#endif /* CONFIG_MACH_U300_BS335 */
 };
 
 static struct resource keypad_resources[] = {
@@ -323,7 +318,6 @@ static struct resource dma_resource[] = {
 	}
 };
 
-#ifdef CONFIG_MACH_U300_BS335
 /* points out all dma slave channels.
  * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
  * Select all channels from A to B, end of list is marked with -1,-1
@@ -336,14 +330,6 @@ static int dma_slave_channels[] = {
 static int dma_memcpy_channels[] = {
 	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
 
-#else /* CONFIG_MACH_U300_BS335 */
-
-static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
-static int dma_memcpy_channels[] = {
-	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
-
-#endif
-
 /** register dma for memory access
  *
  * active  1 means dma intends to access memory
@@ -1395,7 +1381,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.param.ctrl_lli = flags_memcpy_lli,
 		.param.ctrl_lli_last = flags_memcpy_lli_last,
 	},
-#ifdef CONFIG_MACH_U300_BS335
 	{
 		.number = U300_DMA_UART1_TX,
 		.name = "UART1 TX",
@@ -1406,28 +1391,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 		.name = "UART1 RX",
 		.priority_high = 0,
 	}
-#else
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_9,
-		.name = "GENERAL 09",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_10,
-		.name = "GENERAL 10",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	}
-#endif
 };
 
 
@@ -1480,18 +1443,7 @@ static struct platform_device pinctrl_device = {
  * GPIO block, with different number of ports.
  */
 static struct u300_gpio_platform u300_gpio_plat = {
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-	.variant = U300_GPIO_COH901335,
-	.ports = 3,
-#endif
-#ifdef CONFIG_MACH_U300_BS335
-	.variant = U300_GPIO_COH901571_3_BS335,
 	.ports = 7,
-#endif
-#ifdef CONFIG_MACH_U300_BS365
-	.variant = U300_GPIO_COH901571_3_BS365,
-	.ports = 5,
-#endif
 	.gpio_base = 0,
 	.gpio_irq_base = IRQ_U300_GPIO_BASE,
 	.pinctrl_device = &pinctrl_device,
@@ -1605,9 +1557,6 @@ static struct u300_mux_hog u300_mux_hogs[] = {
 		.dev = &uart0_device.dev,
 	},
 	{
-		.dev = &pl022_device.dev,
-	},
-	{
 		.dev = &mmcsd_device.dev,
 	},
 };
@@ -1651,7 +1600,7 @@ static struct platform_device *platform_devs[] __initdata = {
  * together so some interrupts are connected to the first one and some
  * to the second one.
  */
-void __init u300_init_irq(void)
+static void __init u300_init_irq(void)
 {
 	u32 mask[2] = {0, 0};
 	struct clk *clk;
@@ -1756,29 +1705,11 @@ static void __init u300_init_check_chip(void)
 	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
 	       "(chip ID 0x%04x)\n", chipname, val);
 
-#ifdef CONFIG_MACH_U300_BS330
-	if ((val & 0xFF00U) != 0xd800) {
-		printk(KERN_ERR "Platform configured for BS330 " \
-		       "with DB3200 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
-#ifdef CONFIG_MACH_U300_BS335
 	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
 		printk(KERN_ERR "Platform configured for BS335 " \
 		       " with DB3350 but %s detected, expect problems!",
 		       chipname);
 	}
-#endif
-#ifdef CONFIG_MACH_U300_BS365
-	if ((val & 0xFF00U) != 0xe800) {
-		printk(KERN_ERR "Platform configured for BS365 " \
-		       "with DB3210 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
-
-
 }
 
 /*
@@ -1811,7 +1742,7 @@ static void __init u300_assign_physmem(void)
 	}
 }
 
-void __init u300_init_devices(void)
+static void __init u300_init_machine(void)
 {
 	int i;
 	u16 val;
@@ -1852,7 +1783,7 @@ void __init u300_init_devices(void)
 /* Forward declare this function from the watchdog */
 void coh901327_watchdog_reset(void);
 
-void u300_restart(char mode, const char *cmd)
+static void u300_restart(char mode, const char *cmd)
 {
 	switch (mode) {
 	case 's':
@@ -1868,3 +1799,15 @@ void u300_restart(char mode, const char *cmd)
 	/* Wait for system do die/reset. */
 	while (1);
 }
+
+MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
+	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+	.atag_offset	= 0x100,
+	.map_io		= u300_map_io,
+	.nr_irqs	= NR_IRQS_U300,
+	.init_irq	= u300_init_irq,
+	.handle_irq	= vic_handle_irq,
+	.timer		= &u300_timer,
+	.init_machine	= u300_init_machine,
+	.restart	= u300_restart,
+MACHINE_END
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/dma_channels.h
index b239149ba0d0..4e8a88fbca49 100644
--- a/arch/arm/mach-u300/include/mach/dma_channels.h
+++ b/arch/arm/mach-u300/dma_channels.h
@@ -3,7 +3,7 @@
  * arch/arm/mach-u300/include/mach/dma_channels.h
  *
  *
- * Copyright (C) 2007-2009 ST-Ericsson
+ * Copyright (C) 2007-2012 ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
  * Map file for the U300 dma driver.
  * Author: Per Friden <per.friden@stericsson.com>
@@ -50,19 +50,10 @@
 #define U300_DMA_GENERAL_PURPOSE_6    35
 #define U300_DMA_GENERAL_PURPOSE_7    36
 #define U300_DMA_GENERAL_PURPOSE_8    37
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_DMA_UART1_TX             38
 #define U300_DMA_UART1_RX             39
-#else
-#define U300_DMA_GENERAL_PURPOSE_9    38
-#define U300_DMA_GENERAL_PURPOSE_10   39
-#endif
 
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_DMA_DEVICE_CHANNELS      32
-#else
-#define U300_DMA_DEVICE_CHANNELS      30
-#endif
 #define U300_DMA_CHANNELS             40
 
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index cb04bd6ab3e7..96800aa1316d 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-u300/i2c.c
  *
- * Copyright (C) 2009 ST-Ericsson AB
+ * Copyright (C) 2009-2012 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  *
  * Register board i2c devices
@@ -9,7 +9,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-#include <linux/mfd/abx500.h>
+#include <linux/mfd/ab3100.h>
 #include <linux/regulator/machine.h>
 #include <linux/amba/bus.h>
 #include <mach/irqs.h>
@@ -261,7 +261,6 @@ static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
 };
 
 static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
-#ifdef CONFIG_MACH_U300_BS335
 	{
 		.type = "fwcam",
 		.addr = 0x10,
@@ -270,9 +269,6 @@ static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
 		.type = "fwcam",
 		.addr = 0x5d,
 	},
-#else
-	{ },
-#endif
 };
 
 void __init u300_i2c_register_board_devices(void)
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
deleted file mode 100644
index 92e3cc872c66..000000000000
--- a/arch/arm/mach-u300/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
deleted file mode 100644
index e81400c1753a..000000000000
--- a/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007-2011 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_U300_H
-#define __MACH_U300_GPIO_U300_H
-
-/**
- * enum u300_gpio_variant - the type of U300 GPIO employed
- */
-enum u300_gpio_variant {
-	U300_GPIO_COH901335,
-	U300_GPIO_COH901571_3_BS335,
-	U300_GPIO_COH901571_3_BS365,
-};
-
-/**
- * struct u300_gpio_platform - U300 GPIO platform data
- * @variant: IP block variant
- * @ports: number of GPIO block ports
- * @gpio_base: first GPIO number for this block (use a free range)
- * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
- * @pinctrl_device: pin control device to spawn as child
- */
-struct u300_gpio_platform {
-	enum u300_gpio_variant variant;
-	u8 ports;
-	int gpio_base;
-	int gpio_irq_base;
-	struct platform_device *pinctrl_device;
-};
-
-#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ec09c1e07b1a..e27425a63fa1 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -3,7 +3,7 @@
  * arch/arm/mach-u300/include/mach/irqs.h
  *
  *
- * Copyright (C) 2006-2009 ST-Ericsson AB
+ * Copyright (C) 2006-2012 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * IRQ channel definitions for the U300 platforms.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -31,10 +31,6 @@
 #define IRQ_U300_XGAM_GAMCON		14
 #define IRQ_U300_XGAM_CDI		15
 #define IRQ_U300_XGAM_CDICON		16
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-/* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		17
-#endif
 #define IRQ_U300_XGAM_PDI		18
 #define IRQ_U300_XGAM_PDICON		19
 #define IRQ_U300_XGAM_GAMEACC		20
@@ -55,8 +51,6 @@
 #define IRQ_U300_GPIO_PORT1		34
 #define IRQ_U300_GPIO_PORT2		35
 
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
-    defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
 #define IRQ_U300_WDOG			36
 #define IRQ_U300_EVHIST			37
@@ -68,15 +62,8 @@
 #define IRQ_U300_RTC			43
 #define IRQ_U300_NFIF			44
 #define IRQ_U300_NFIF2			45
-#endif
-
-/* DB3150 and DB3200 have only 45 IRQs */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		46
-#endif
 
 /* The DB3350-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS335
 #define IRQ_U300_ISP_F0			46
 #define IRQ_U300_ISP_F1			47
 #define IRQ_U300_ISP_F2			48
@@ -89,25 +76,6 @@
 #define IRQ_U300_GPIO_PORT5		55
 #define IRQ_U300_GPIO_PORT6		56
 #define U300_VIC_IRQS_END		57
-#endif
-
-/* The DB3210-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		36
-#define IRQ_U300_GPIO_PORT4		37
-#define IRQ_U300_WDOG			38
-#define IRQ_U300_EVHIST			39
-#define IRQ_U300_MSPRO			40
-#define IRQ_U300_MMCSD_MCIINTR0		41
-#define IRQ_U300_MMCSD_MCIINTR1		42
-#define IRQ_U300_I2C0			43
-#define IRQ_U300_I2C1			44
-#define IRQ_U300_RTC			45
-#define IRQ_U300_NFIF			46
-#define IRQ_U300_NFIF2			47
-#define IRQ_U300_SYSCON_PLL_LOCK	48
-#define U300_VIC_IRQS_END		49
-#endif
 
 /* Maximum 8*7 GPIO lines */
 #ifdef CONFIG_PINCTRL_COH901
@@ -117,6 +85,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
+#define NR_IRQS_U300			(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
deleted file mode 100644
index 096333f32fc3..000000000000
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/platform.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic platform init and mapping functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __ASSEMBLY__
-
-void u300_map_io(void);
-void u300_init_irq(void);
-void u300_init_devices(void);
-void u300_restart(char, const char *);
-extern struct sys_timer u300_timer;
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 6e84f07a7c6f..10bdd0be9774 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -3,7 +3,7 @@
  * arch/arm/mach-u300/include/mach/syscon.h
  *
  *
- * Copyright (C) 2008 ST-Ericsson AB
+ * Copyright (C) 2008-2012 ST-Ericsson AB
  *
  * Author: Rickard Andersson <rickard.andersson@stericsson.com>
  */
@@ -36,9 +36,7 @@
 #define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
 /* Reset lines for SLOW devices 16bit (R/W) */
 #define U300_SYSCON_RSR						(0x0014)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
-#endif
 #define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
 #define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
 #define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
@@ -50,9 +48,7 @@
 #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
 /* Reset lines for FAST devices 16bit (R/W) */
 #define U300_SYSCON_RFR						(0x0018)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
-#endif
 #define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
 #define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
 #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
@@ -62,10 +58,8 @@
 #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
 /* Reset lines for the rest of the peripherals 16bit (R/W) */
 #define U300_SYSCON_RRR						(0x001c)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
 #define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
-#endif
 #define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
 #define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
 #define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
@@ -79,9 +73,7 @@
 #define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
 /* Clock enable for SLOW peripherals 16bit (R/W) */
 #define U300_SYSCON_CESR					(0x0020)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
-#endif
 #define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
 #define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
 #define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
@@ -92,24 +84,20 @@
 #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
 /* Clock enable for FAST peripherals 16bit (R/W) */
 #define U300_SYSCON_CEFR					(0x0024)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
-#endif
 #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
 #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
 #define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
 #define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN    			(0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN     			(0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN     			(0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN     			(0x0002)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN				(0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN				(0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN				(0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN				(0x0002)
 #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
 /* Clock enable for the rest of the peripherals 16bit (R/W) */
 #define U300_SYSCON_CERR					(0x0028)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
 #define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
-#endif
 #define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
 #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
 #define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
@@ -124,9 +112,7 @@
 #define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
 /* Single block clock enable 16bit (-/W) */
 #define U300_SYSCON_SBCER					(0x002c)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
-#endif
 #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
 #define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
 #define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
@@ -135,9 +121,7 @@
 #define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
 #define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
 #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
-#endif
 #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
 #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
 #define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
@@ -147,10 +131,8 @@
 #define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
 #define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
 #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
 #define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
-#endif
 #define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
 #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
 #define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
@@ -168,9 +150,7 @@
 /* Same values as above for SBCER */
 /* Clock force SLOW peripherals 16bit (R/W) */
 #define U300_SYSCON_CFSR					(0x003c)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
-#endif
 #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
 #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
 #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
@@ -184,10 +164,8 @@
 /* Values not defined. Define if you want to use them. */
 /* Clock force the rest of the peripherals 16bit (R/W) */
 #define U300_SYSCON_CFRR					(0x44)
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
 #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
-#endif
 #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
 #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
 #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 65f87c523892..1e49d901f2c9 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -28,7 +28,6 @@
 #define PLAT_NAND_CLE			(1 << 16)
 #define PLAT_NAND_ALE			(1 << 17)
 
-
 /* AHB Peripherals */
 #define U300_AHB_PER_PHYS_BASE		0xa0000000
 #define U300_AHB_PER_VIRT_BASE		0xff010000
@@ -46,11 +45,7 @@
 #define U300_BOOTROM_VIRT_BASE		0xffff0000
 
 /* SEMI config base */
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_SEMI_CONFIG_BASE		0x2FFE0000
-#else
-#define U300_SEMI_CONFIG_BASE		0x30000000
-#endif
 
 /*
  * AHB peripherals
@@ -99,10 +94,8 @@
 /* SPI controller */
 #define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
 
-#ifdef CONFIG_MACH_U300_BS335
 /* Fast UART1 on U335 only */
 #define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
-#endif
 
 /*
  * SLOW peripherals
@@ -151,10 +144,8 @@
  * REST peripherals
  */
 
-/* ISP (image signal processor) is only available in U335 */
-#ifdef CONFIG_MACH_U300_BS335
+/* ISP (image signal processor) */
 #define U300_ISP_BASE			(0xA0008000)
-#endif
 
 /* DMA Controller base */
 #define U300_DMAC_BASE			(0xC0020000)
@@ -166,17 +157,9 @@
 #define U300_APEX_BASE			(0xc0030000)
 
 /* Video Encoder Base */
-#ifdef CONFIG_MACH_U300_BS335
 #define U300_VIDEOENC_BASE		(0xc0080000)
-#else
-#define U300_VIDEOENC_BASE		(0xc0040000)
-#endif
 
 /* XGAM Base */
 #define U300_XGAM_BASE			(0xd0000000)
 
-/*
- * Virtual accessor macros for static devices
- */
-
 #endif
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index a1affacfa59c..02e6659286d5 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -12,7 +12,7 @@
 #include <linux/amba/pl022.h>
 #include <linux/err.h>
 #include <mach/coh901318.h>
-#include <mach/dma_channels.h>
+#include "dma_channels.h"
 
 /*
  * The following is for the actual devices on the SSP/SPI bus
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 56ac06d38ec1..1da10e20e996 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -17,14 +17,17 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 /* Generic stuff */
 #include <asm/sched_clock.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/mach/irq.h>
+
+#include "timer.h"
 
 /*
  * APP side special timer registers
diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h
new file mode 100644
index 000000000000..b5e9791762e0
--- /dev/null
+++ b/arch/arm/mach-u300/timer.h
@@ -0,0 +1 @@
+extern struct sys_timer u300_timer;
diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h
index 847dc25300c6..83f50772e169 100644
--- a/arch/arm/mach-u300/u300-gpio.h
+++ b/arch/arm/mach-u300/u300-gpio.h
@@ -1,50 +1,11 @@
 /*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX		0
-#define U300_GPIO_PIN_UART_TX		1
-#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
-#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP		4
-#define U300_GPIO_PIN_CAM_REG_EN	5
-#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
-#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
+ * Individual pin assignments for the B335/S335.
  * Notice that the actual usage of these pins depends on the
  * PAD MUX settings, that is why the same number can potentially
  * appear several times. In the reference design each pin is only
  * used for one purpose. These were determined by inspecting the
  * S365 schematic.
  */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
-    defined(CONFIG_MACH_U300_BS335)
 #define U300_GPIO_PIN_UART_RX		0
 #define U300_GPIO_PIN_UART_TX		1
 #define U300_GPIO_PIN_UART_CTS		2
@@ -90,8 +51,6 @@
 #define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
 #define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
 
-#ifdef CONFIG_MACH_U300_BS335
-
 #define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
 #define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
 #define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
@@ -109,6 +68,3 @@
 #define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
 #define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
 #define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
-#endif
-
-#endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
deleted file mode 100644
index f30c69d91d99..000000000000
--- a/arch/arm/mach-u300/u300.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/u300.c
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform machine definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/memblock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-
-static void __init u300_init_machine(void)
-{
-	u300_init_devices();
-}
-
-#ifdef CONFIG_MACH_U300_BS2X
-#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS330
-#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS365
-#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
-#endif
-
-MACHINE_START(U300, MACH_U300_STRING)
-	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-	.atag_offset	= 0x100,
-	.map_io		= u300_map_io,
-	.init_irq	= u300_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &u300_timer,
-	.init_machine	= u300_init_machine,
-	.restart	= u300_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c013bbf79cac..c77c86c47369 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@ config UX500_SOC_COMMON
 	select CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
+	select COMMON_CLK
 
 config UX500_SOC_DB8500
 	bool
@@ -28,6 +29,7 @@ config MACH_MOP500
 	select I2C
 	select I2C_NOMADIK
 	select SOC_BUS
+	select REGULATOR_FIXED_VOLTAGE
 	help
 	  Include support for the MOP500 development platform.
 
@@ -41,7 +43,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 026086ff9e6c..f24710dfc395 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= clock.o cpu.o devices.o devices-common.o \
+obj-y				:= cpu.o devices.o devices-common.o \
 				   id.o usb.o timer.o
 obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
@@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
-				board-mop500-msp.o
+				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index dd5cd00e2554..760a0efe7580 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -1,5 +1,3 @@
    zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 996048038743..070629a95625 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,7 +7,6 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <plat/gpio-nomadik.h>
 #include <plat/pincfg.h>
@@ -23,53 +22,6 @@
 #include "devices-db8500.h"
 #include "pins-db8500.h"
 
-/* MSP1/3 Tx/Rx usage protection */
-static DEFINE_SPINLOCK(msp_rxtx_lock);
-
-/* Reference Count */
-static int msp_rxtx_ref;
-
-/* Pin modes */
-struct pinctrl *msp1_p;
-struct pinctrl_state *msp1_def;
-struct pinctrl_state *msp1_sleep;
-
-int msp13_i2s_init(void)
-{
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
-		retval = pinctrl_select_state(msp1_p, msp1_def);
-		if (retval)
-			pr_err("could not set MSP1 defstate\n");
-	}
-	if (!retval)
-		msp_rxtx_ref++;
-	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
-	return retval;
-}
-
-int msp13_i2s_exit(void)
-{
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	WARN_ON(!msp_rxtx_ref);
-	msp_rxtx_ref--;
-	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
-		retval = pinctrl_select_state(msp1_p, msp1_sleep);
-		if (retval)
-			pr_err("could not set MSP1 sleepstate\n");
-	}
-	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
-	return retval;
-}
-
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
 	.dir = STEDMA40_PERIPH_TO_MEM,
@@ -96,7 +48,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static struct msp_i2s_platform_data msp0_platform_data = {
+struct msp_i2s_platform_data msp0_platform_data = {
 	.id = MSP_I2S_0,
 	.msp_i2s_dma_rx = &msp0_dma_rx,
 	.msp_i2s_dma_tx = &msp0_dma_tx,
@@ -128,12 +80,10 @@ static struct stedma40_chan_cfg msp1_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static struct msp_i2s_platform_data msp1_platform_data = {
+struct msp_i2s_platform_data msp1_platform_data = {
 	.id = MSP_I2S_1,
 	.msp_i2s_dma_rx = NULL,
 	.msp_i2s_dma_tx = &msp1_dma_tx,
-	.msp_i2s_init = msp13_i2s_init,
-	.msp_i2s_exit = msp13_i2s_exit,
 };
 
 static struct stedma40_chan_cfg msp2_dma_rx = {
@@ -191,13 +141,13 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 	return pdev;
 }
 
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
-		.name = "snd-soc-u8500",
-		.id = 0,
-		.dev = {
-			.platform_data = NULL,
-		},
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+	.name = "snd-soc-mop500",
+	.id = 0,
+	.dev = {
+		.platform_data = NULL,
+	},
 };
 
 /* Platform device for Ux500-PCM */
@@ -209,59 +159,37 @@ static struct platform_device ux500_pcm = {
 		},
 };
 
-static struct msp_i2s_platform_data msp2_platform_data = {
+struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
 	.msp_i2s_dma_tx = &msp2_dma_tx,
 };
 
-static struct msp_i2s_platform_data msp3_platform_data = {
+struct msp_i2s_platform_data msp3_platform_data = {
 	.id		= MSP_I2S_3,
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
-	.msp_i2s_init = msp13_i2s_init,
-	.msp_i2s_exit = msp13_i2s_exit,
 };
 
-int mop500_msp_init(struct device *parent)
+void mop500_audio_init(struct device *parent)
 {
-	struct platform_device *msp1;
-
-	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
-	platform_device_register(&snd_soc_u8500);
+	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
 			   &msp0_platform_data);
-	msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
 			   &msp1_platform_data);
 	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
 			   &msp2_platform_data);
 	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
 			   &msp3_platform_data);
+}
 
-	/* Get the pinctrl handle for MSP1 */
-	if (msp1) {
-		msp1_p = pinctrl_get(&msp1->dev);
-		if (IS_ERR(msp1_p))
-			dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
-		else {
-			msp1_def = pinctrl_lookup_state(msp1_p,
-							PINCTRL_STATE_DEFAULT);
-			if (IS_ERR(msp1_def)) {
-				dev_err(&msp1->dev,
-					"could not get MSP1 defstate\n");
-			}
-			msp1_sleep = pinctrl_lookup_state(msp1_p,
-							  PINCTRL_STATE_SLEEP);
-			if (IS_ERR(msp1_sleep))
-				dev_err(&msp1->dev,
-					"could not get MSP1 idlestate\n");
-		}
-	}
-
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent)
+{
 	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
 	platform_device_register(&ux500_pcm);
-
-	return 0;
 }
diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h
deleted file mode 100644
index 6fcfb5e2cc94..000000000000
--- a/arch/arm/mach-ux500/board-mop500-msp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2012
- *
- * Author: Ola Lilja <ola.o.lilja@stericsson.com>,
- *         for ST-Ericsson.
- *
- * License terms:
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-void mop500_msp_init(struct device *parent);
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 32fd99204464..a267c6d30e37 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -30,16 +30,15 @@ static enum custom_pin_cfg_t pinsfor;
 #define BIAS(a,b) static unsigned long a[] = { b }
 
 BIAS(pd, PIN_PULL_DOWN);
-BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
 BIAS(in_nopull, PIN_INPUT_NOPULL);
-BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
+BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
 BIAS(in_pu, PIN_INPUT_PULLUP);
 BIAS(in_pd, PIN_INPUT_PULLDOWN);
 BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP);
 BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW);
 BIAS(out_hi, PIN_OUTPUT_HIGH);
 BIAS(out_lo, PIN_OUTPUT_LOW);
-BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
+BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
 /* These also force them into GPIO mode */
 BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
 BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
@@ -48,23 +47,32 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL
 BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
 BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
 /* Sleep modes */
-BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE);
-BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
-BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
 
 /* We use these to define hog settings that are always done on boot */
 #define DB8500_MUX_HOG(group,func) \
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
 #define DB8500_PIN_HOG(pin,conf) \
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
+#define DB8500_PIN_SLEEP(pin, conf, dev) \
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
+			    pin, conf)
 
 /* These are default states associated with device and changed runtime */
 #define DB8500_MUX(group,func,dev) \
 	PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
 #define DB8500_PIN(pin,conf,dev) \
 	PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
+#define DB8500_PIN_SLEEP(pin, conf, dev) \
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
+			    pin, conf)
 
 #define DB8500_PIN_SLEEP(pin,conf,dev) \
 	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
@@ -134,40 +142,47 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
 	DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
 	/* UART0 sleep state */
-	DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"),
-	DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
 	/* MSP1 for ALSA codec */
 	DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
 	DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
-	DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO33_AF2", out_lo_slpm_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO34_AE1", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO35_AE2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO36_AG2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
 	/* MSP1 sleep state */
-	DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"),
-	DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
-	DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
-	DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO33_AF2", slpm_out_lo_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO34_AE1", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO35_AE2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO36_AG2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
 	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
 	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
 	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
 	/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
 	DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"),
-	/* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */
+	/* Mux in i2c0 block, default state */
 	DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
-	DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"),
-	DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"),
+	/* i2c0 sleep state */
+	DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
+	/* Mux in i2c1 block, default state  */
 	DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
-	DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"),
-	DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"),
+	/* i2c1 sleep state */
+	DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
+	/* Mux in i2c2 block, default state  */
 	DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
-	DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"),
-	DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"),
+	/* i2c2 sleep state */
+	DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
+	/* Mux in i2c3 block, default state  */
 	DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
-	DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"),
-	DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"),
+	/* i2c3 sleep state */
+	DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
+	DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
 	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
 	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
 	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
@@ -219,11 +234,15 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
 	DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
 	/* Mux in SPI2 pins on the "other C1" altfunction */
-	DB8500_MUX("spi2_oc1_1", "spi2", "spi2"),
+	DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
 	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
 	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
 	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
 	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
+	/* SPI2 sleep state */
+	DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
+	DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
+	DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
 };
 
 /*
@@ -410,7 +429,7 @@ static struct pinctrl_map __initdata u9500_pinmap[] = {
 	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
 	/* HSI */
 	DB8500_MUX_HOG("hsir_a_1", "hsi"),
-	DB8500_MUX_HOG("hsit_a_1", "hsi"),
+	DB8500_MUX_HOG("hsit_a_2", "hsi"),
 	DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
 	DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
 	DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
@@ -418,7 +437,7 @@ static struct pinctrl_map __initdata u9500_pinmap[] = {
 	DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
 	DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
 	DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
-	DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */
+	DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */
 };
 
 static struct pinctrl_map __initdata u8500_pinmap[] = {
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 52426a425787..2a17bc506cff 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -13,6 +13,21 @@
 #include <linux/regulator/ab8500.h>
 #include "board-mop500-regulators.h"
 
+static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
+       REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+struct regulator_init_data gpio_en_3v3_regulator = {
+       .constraints = {
+               .name = "EN-3V3",
+               .min_uV = 3300000,
+               .max_uV = 3300000,
+               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
+       .consumer_supplies = gpio_en_3v3_consumers,
+};
+
 /*
  * TPS61052 regulator
  */
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index 94992158d962..78a0642a2206 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -18,5 +18,6 @@ extern struct ab8500_regulator_reg_init
 ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
 extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
 extern struct regulator_init_data tps61052_regulator;
+extern struct regulator_init_data gpio_en_3v3_regulator;
 
 #endif
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 18ff781cfbe4..9c8e4a9e83ee 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -152,7 +152,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi1_data = {
+struct mmci_platform_data mop500_sdi1_data = {
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA,
@@ -189,7 +189,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi2_data = {
+struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8674a890fd1c..416d436111f2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -23,6 +23,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
+#include <linux/regulator/fixed.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
 #include <linux/mfd/abx500/ab8500-gpio.h>
@@ -48,13 +49,12 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
-#include "board-mop500-msp.h"
 
 static struct gpio_led snowball_led_array[] = {
 	{
@@ -76,6 +76,23 @@ static struct platform_device snowball_led_dev = {
 	},
 };
 
+static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
+       .supply_name            = "EN-3V3",
+       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
+       .microvolts             = 3300000,
+       .enable_high            = 1,
+       .init_data              = &gpio_en_3v3_regulator,
+       .startup_delay          = 5000, /* 1200us */
+};
+
+static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
+       .name   = "reg-fixed-voltage",
+       .id     = 1,
+       .dev    = {
+               .platform_data  = &snowball_gpio_en_3v3_data,
+       },
+};
+
 static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
 	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
@@ -524,33 +541,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-	void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_SET);
-	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_CLEAR);
-
-	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-	udelay(1);
-
-	/* Release soft reset PRCC_K_SOFTRST_SET */
-	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-	udelay(1);
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {
@@ -586,6 +582,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_led_dev,
 	&snowball_key_dev,
 	&snowball_sbnet_dev,
+	&snowball_gpio_en_3v3_regulator_dev,
 };
 
 static void __init mop500_init_machine(void)
@@ -608,7 +605,7 @@ static void __init mop500_init_machine(void)
 	mop500_i2c_init(parent);
 	mop500_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	u8500_cryp1_hash1_init(parent);
@@ -642,7 +639,7 @@ static void __init snowball_init_machine(void)
 	mop500_i2c_init(parent);
 	snowball_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	/* This board has full regulator constraints */
@@ -674,7 +671,7 @@ static void __init hrefv60_init_machine(void)
 	mop500_i2c_init(parent);
 	hrefv60_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -694,6 +691,7 @@ static void __init hrefv60_init_machine(void)
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -705,6 +703,7 @@ MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
@@ -715,6 +714,7 @@ MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -726,12 +726,9 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+	/* Requires call-back bindings. */
+	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
@@ -739,6 +736,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	/* Requires clock name bindings. */
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
@@ -757,6 +756,15 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+	/* Requires clock name and DMA bindings. */
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		"ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		"ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		"ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		"ux500-msp-i2s.3", &msp3_platform_data),
 	{},
 };
 
@@ -797,6 +805,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +813,8 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		mop500_of_audio_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -814,15 +825,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		hrefv60_sdi_init(parent);
-
-		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-		i2c_register_board_info(2, mop500_i2c2_devices,
-					ARRAY_SIZE(mop500_i2c2_devices));
-
 		mop500_uib_init();
 	}
 
@@ -840,6 +842,7 @@ static const char * u8500_dt_board_compat[] = {
 
 
 DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index b5bfc1a78b1a..aca39a68712a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -9,6 +9,7 @@
 
 /* For NOMADIK_NR_GPIO */
 #include <mach/irqs.h>
+#include <mach/msp.h>
 #include <linux/amba/mmci.h>
 
 /* Snowball specific GPIO assignments, this board has no GPIO expander */
@@ -80,7 +81,14 @@
 struct device;
 struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
+extern struct mmci_platform_data mop500_sdi1_data;
+extern struct mmci_platform_data mop500_sdi2_data;
 extern struct mmci_platform_data mop500_sdi4_data;
+extern struct msp_i2s_platform_data msp0_platform_data;
+extern struct msp_i2s_platform_data msp1_platform_data;
+extern struct msp_i2s_platform_data msp2_platform_data;
+extern struct msp_i2s_platform_data msp3_platform_data;
+extern struct arm_pmu_platdata db8500_pmu_platdata;
 
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);
@@ -91,6 +99,9 @@ void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
+void mop500_audio_init(struct device *parent);
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index dc12394295d5..75d5b512a3d5 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -38,7 +38,7 @@ static int __init ux500_l2x0_init(void)
 {
 	u32 aux_val = 0x3e000000;
 
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
 		ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
deleted file mode 100644
index 8d73b066a18d..000000000000
--- a/arch/arm/mach-ux500/clock.c
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>	/* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-
-#define PRCC_PCKEN		0x00
-#define PRCC_PCKDIS		0x04
-#define PRCC_KCKEN		0x08
-#define PRCC_KCKDIS		0x0C
-
-#define PRCM_YYCLKEN0_MGT_SET	0x510
-#define PRCM_YYCLKEN1_MGT_SET	0x514
-#define PRCM_YYCLKEN0_MGT_CLR	0x518
-#define PRCM_YYCLKEN1_MGT_CLR	0x51C
-#define PRCM_YYCLKEN0_MGT_VAL	0x520
-#define PRCM_YYCLKEN1_MGT_VAL	0x524
-
-#define PRCM_SVAMMDSPCLK_MGT	0x008
-#define PRCM_SIAMMDSPCLK_MGT	0x00C
-#define PRCM_SGACLK_MGT		0x014
-#define PRCM_UARTCLK_MGT	0x018
-#define PRCM_MSP02CLK_MGT	0x01C
-#define PRCM_MSP1CLK_MGT	0x288
-#define PRCM_I2CCLK_MGT		0x020
-#define PRCM_SDMMCCLK_MGT	0x024
-#define PRCM_SLIMCLK_MGT	0x028
-#define PRCM_PER1CLK_MGT	0x02C
-#define PRCM_PER2CLK_MGT	0x030
-#define PRCM_PER3CLK_MGT	0x034
-#define PRCM_PER5CLK_MGT	0x038
-#define PRCM_PER6CLK_MGT	0x03C
-#define PRCM_PER7CLK_MGT	0x040
-#define PRCM_LCDCLK_MGT		0x044
-#define PRCM_BMLCLK_MGT		0x04C
-#define PRCM_HSITXCLK_MGT	0x050
-#define PRCM_HSIRXCLK_MGT	0x054
-#define PRCM_HDMICLK_MGT	0x058
-#define PRCM_APEATCLK_MGT	0x05C
-#define PRCM_APETRACECLK_MGT	0x060
-#define PRCM_MCDECLK_MGT	0x064
-#define PRCM_IPI2CCLK_MGT	0x068
-#define PRCM_DSIALTCLK_MGT	0x06C
-#define PRCM_DMACLK_MGT		0x074
-#define PRCM_B2R2CLK_MGT	0x078
-#define PRCM_TVCLK_MGT		0x07C
-#define PRCM_TCR		0x1C8
-#define PRCM_TCR_STOPPED	(1 << 16)
-#define PRCM_TCR_DOZE_MODE	(1 << 17)
-#define PRCM_UNIPROCLK_MGT	0x278
-#define PRCM_SSPCLK_MGT		0x280
-#define PRCM_RNGCLK_MGT		0x284
-#define PRCM_UICCCLK_MGT	0x27C
-
-#define PRCM_MGT_ENABLE		(1 << 8)
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (clk->enabled++ == 0) {
-		if (clk->parent_cluster)
-			__clk_enable(clk->parent_cluster);
-
-		if (clk->parent_periph)
-			__clk_enable(clk->parent_periph);
-
-		if (clk->ops && clk->ops->enable)
-			clk->ops->enable(clk);
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (--clk->enabled == 0) {
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-
-		if (clk->parent_periph)
-			__clk_disable(clk->parent_periph);
-
-		if (clk->parent_cluster)
-			__clk_disable(clk->parent_cluster);
-	}
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(!clk->enabled);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
-	void __iomem *addr;
-	u32 tcr;
-	int mtu = (int) clk->data;
-	/*
-	 * One of these is selected eventually
-	 * TODO: Replace the constant with a reference
-	 * to the ULP source once this is modeled.
-	 */
-	unsigned long clk32k = 32768;
-	unsigned long mturate;
-	unsigned long retclk;
-
-	if (cpu_is_u8500_family())
-		addr = __io_address(U8500_PRCMU_BASE);
-	else
-		ux500_unknown_soc();
-
-	/*
-	 * On a startup, always conifgure the TCR to the doze mode;
-	 * bootloaders do it for us. Do this in the kernel too.
-	 */
-	writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-
-	tcr = readl(addr + PRCM_TCR);
-
-	/* Get the rate from the parent as a default */
-	if (clk->parent_periph)
-		mturate = clk_get_rate(clk->parent_periph);
-	else if (clk->parent_cluster)
-		mturate = clk_get_rate(clk->parent_cluster);
-	else
-		/* We need to be connected SOMEWHERE */
-		BUG();
-
-	/* Return the clock selected for this MTU */
-	if (tcr & (1 << mtu))
-		retclk = clk32k;
-	else
-		retclk = mturate;
-
-	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
-	return retclk;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	/*
-	 * If there is a custom getrate callback for this clock,
-	 * it will take precedence.
-	 */
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	if (clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	rate = clk->rate;
-	if (!rate) {
-		if (clk->parent_periph)
-			rate = clk_get_rate(clk->parent_periph);
-		else if (clk->parent_cluster)
-			rate = clk_get_rate(clk->parent_cluster);
-	}
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/*TODO*/
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/*TODO*/
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-static void clk_prcmu_enable(struct clk *clk)
-{
-	void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
-				   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-
-	writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-
-static void clk_prcmu_disable(struct clk *clk)
-{
-	void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
-				   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-
-	writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-
-static struct clkops clk_prcmu_ops = {
-	.enable = clk_prcmu_enable,
-	.disable = clk_prcmu_disable,
-};
-
-static unsigned int clkrst_base[] = {
-	[1] = U8500_CLKRST1_BASE,
-	[2] = U8500_CLKRST2_BASE,
-	[3] = U8500_CLKRST3_BASE,
-	[5] = U8500_CLKRST5_BASE,
-	[6] = U8500_CLKRST6_BASE,
-};
-
-static void clk_prcc_enable(struct clk *clk)
-{
-	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
-	if (clk->prcc_kernel != -1)
-		writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-
-	if (clk->prcc_bus != -1)
-		writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-
-static void clk_prcc_disable(struct clk *clk)
-{
-	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
-	if (clk->prcc_bus != -1)
-		writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-
-	if (clk->prcc_kernel != -1)
-		writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-
-static struct clkops clk_prcc_ops = {
-	.enable = clk_prcc_enable,
-	.disable = clk_prcc_disable,
-};
-
-static struct clk clk_32khz = {
-	.name =  "clk_32khz",
-	.rate = 32000,
-};
-
-/*
- * PRCMU level clock gating
- */
-
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk,		0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk,		0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk,		0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk,	0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk,	0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk,	0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk,	0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk,	0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk,	0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk,	0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk,	0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk,	0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk,	0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk,		0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk,		0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk,	0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk,	0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk,	0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk,	0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk,	0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk,	0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk,	0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk,	0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk,		0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk,	0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk,		0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk,	0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk,	0x0, 31, SSPCLK, 48000000); /* v1 */
-
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk,		0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
-
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, msp3,		11, 10, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, i2c4,		10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0,	8,  8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3,		7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2,		6,  6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0,		5,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1,		4,  4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0,		3,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1,		2,  2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1,	1,  1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0,	0,  0, &clk_uartclk);
-
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1,	11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx,	10,  7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx,	 9,  6, NULL);
-static DEFINE_PRCC_CLK(2, spi0,		8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3,		7,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1,		6,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2,		5,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4,		4,  2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl,		3,  1, NULL);
-static DEFINE_PRCC_CLK(2, spi1,		2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2,		1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3,		0,  0, &clk_i2cclk);
-
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2,	8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5,		7,  7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2,	6,  6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske,		5,  5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2,		4,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0,		3,  3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1,		2,  2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0,		1,  1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc,		0, -1, NULL);
-
-/* Peripheral Cluster #4 is in the always on domain */
-
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3,	1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb,		0,  0, NULL);
-
-/* Peripheral Cluster #6 */
-
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg,	7,  7, NULL);
-static DEFINE_PRCC_CLK(6, hash1,	6, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro,	5,  1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka,		4, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0,	3, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0,	2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp1,    1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng,	0,  0, &clk_rngclk);
-
-static struct clk clk_dummy_apb_pclk = {
-	.name = "apb_pclk",
-};
-
-static struct clk_lookup u8500_clks[] = {
-	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
-
-	/* Peripheral Cluster #1 */
-	CLK(gpio0,	"gpio.0",	NULL),
-	CLK(gpio0,	"gpio.1",	NULL),
-	CLK(slimbus0,	"slimbus0",	NULL),
-	CLK(i2c2,	"nmk-i2c.2",	NULL),
-	CLK(sdi0,	"sdi0",		NULL),
-	CLK(msp0,	"ux500-msp-i2s.0",	NULL),
-	CLK(i2c1,	"nmk-i2c.1",	NULL),
-	CLK(uart1,	"uart1",	NULL),
-	CLK(uart0,	"uart0",	NULL),
-
-	/* Peripheral Cluster #3 */
-	CLK(gpio2,	"gpio.2",	NULL),
-	CLK(gpio2,	"gpio.3",	NULL),
-	CLK(gpio2,	"gpio.4",	NULL),
-	CLK(gpio2,	"gpio.5",	NULL),
-	CLK(sdi5,	"sdi5",		NULL),
-	CLK(uart2,	"uart2",	NULL),
-	CLK(ske,	"ske",		NULL),
-	CLK(ske,	"nmk-ske-keypad",	NULL),
-	CLK(sdi2,	"sdi2",		NULL),
-	CLK(i2c0,	"nmk-i2c.0",	NULL),
-	CLK(fsmc,	"fsmc",		NULL),
-
-	/* Peripheral Cluster #5 */
-	CLK(gpio3,	"gpio.8",	NULL),
-
-	/* Peripheral Cluster #6 */
-	CLK(hash1,	"hash1",	NULL),
-	CLK(pka,	"pka",		NULL),
-	CLK(hash0,	"hash0",	NULL),
-	CLK(cryp0,	"cryp0",	NULL),
-	CLK(cryp1,  "cryp1",    NULL),
-
-	/* PRCMU level clock gating */
-
-	/* Bank 0 */
-	CLK(svaclk,	"sva",		NULL),
-	CLK(siaclk,	"sia",		NULL),
-	CLK(sgaclk,	"sga",		NULL),
-	CLK(slimclk,	"slim",		NULL),
-	CLK(lcdclk,	"lcd",		NULL),
-	CLK(bmlclk,	"bml",		NULL),
-	CLK(hsitxclk,	"stm-hsi.0",	NULL),
-	CLK(hsirxclk,	"stm-hsi.1",	NULL),
-	CLK(hdmiclk,	"hdmi",		NULL),
-	CLK(apeatclk,	"apeat",	NULL),
-	CLK(apetraceclk,	"apetrace",	NULL),
-	CLK(mcdeclk,	"mcde",		NULL),
-	CLK(ipi2clk,	"ipi2",		NULL),
-	CLK(dmaclk,	"dma40.0",	NULL),
-	CLK(b2r2clk,	"b2r2",		NULL),
-	CLK(tvclk,	"tv",		NULL),
-
-	/* Peripheral Cluster #1 */
-	CLK(i2c4,	"nmk-i2c.4",	NULL),
-	CLK(spi3,	"spi3",		NULL),
-	CLK(msp1,	"ux500-msp-i2s.1",	NULL),
-	CLK(msp3,	"ux500-msp-i2s.3",	NULL),
-
-	/* Peripheral Cluster #2 */
-	CLK(gpio1,	"gpio.6",	NULL),
-	CLK(gpio1,	"gpio.7",	NULL),
-	CLK(ssitx,	"ssitx",	NULL),
-	CLK(ssirx,	"ssirx",	NULL),
-	CLK(spi0,	"spi0",		NULL),
-	CLK(sdi3,	"sdi3",		NULL),
-	CLK(sdi1,	"sdi1",		NULL),
-	CLK(msp2,	"ux500-msp-i2s.2",	NULL),
-	CLK(sdi4,	"sdi4",		NULL),
-	CLK(pwl,	"pwl",		NULL),
-	CLK(spi1,	"spi1",		NULL),
-	CLK(spi2,	"spi2",		NULL),
-	CLK(i2c3,	"nmk-i2c.3",	NULL),
-
-	/* Peripheral Cluster #3 */
-	CLK(ssp1,	"ssp1",		NULL),
-	CLK(ssp0,	"ssp0",		NULL),
-
-	/* Peripheral Cluster #5 */
-	CLK(usb,	"musb-ux500.0",	"usb"),
-
-	/* Peripheral Cluster #6 */
-	CLK(mtu1,	"mtu1",		NULL),
-	CLK(mtu0,	"mtu0",		NULL),
-	CLK(cfgreg,	"cfgreg",	NULL),
-	CLK(hash1,	"hash1",	NULL),
-	CLK(unipro,	"unipro",	NULL),
-	CLK(rng,	"rng",		NULL),
-
-	/* PRCMU level clock gating */
-
-	/* Bank 0 */
-	CLK(uniproclk,	"uniproclk",	NULL),
-	CLK(dsialtclk,	"dsialt",	NULL),
-
-	/* Bank 1 */
-	CLK(rngclk,	"rng",		NULL),
-	CLK(uiccclk,	"uicc",		NULL),
-};
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes with
- *	powerdebug
- */
-static struct dentry *clk_debugfs_root;
-
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
-	while (num--) {
-		/* Check that the clock has not been already registered */
-		if (!(cl->clk->list.prev != cl->clk->list.next))
-			list_add_tail(&cl->clk->list, &clk_list);
-
-		cl++;
-	}
-}
-
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
-						  size_t size, loff_t *off)
-{
-	struct clk *clk = file->f_dentry->d_inode->i_private;
-	char cusecount[128];
-	unsigned int len;
-
-	len = sprintf(cusecount, "%u\n", clk->enabled);
-	return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
-					  size_t size, loff_t *off)
-{
-	struct clk *clk = file->f_dentry->d_inode->i_private;
-	char crate[128];
-	unsigned int rate;
-	unsigned int len;
-
-	rate = clk_get_rate(clk);
-	len = sprintf(crate, "%u\n", rate);
-	return simple_read_from_buffer(buf, size, off, crate, len);
-}
-
-static const struct file_operations usecount_fops = {
-	.read = usecount_dbg_read,
-};
-
-static const struct file_operations set_rate_fops = {
-	.read = rate_dbg_read,
-};
-
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
-						struct dentry *p_dentry)
-{
-	struct dentry *d, *clk_d;
-	const char *p = c->name;
-
-	if (!p)
-		p = "BUG";
-
-	clk_d = debugfs_create_dir(p, p_dentry);
-	if (!clk_d)
-		return NULL;
-
-	d = debugfs_create_file("usecount", S_IRUGO,
-				clk_d, c, &usecount_fops);
-	if (!d)
-		goto err_out;
-	d = debugfs_create_file("rate", S_IRUGO,
-				clk_d, c, &set_rate_fops);
-	if (!d)
-		goto err_out;
-	/*
-	 * TODO : not currently available in ux500
-	 * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
-	 * if (!d)
-	 *	goto err_out;
-	 */
-
-	return clk_d;
-
-err_out:
-	debugfs_remove_recursive(clk_d);
-	return NULL;
-}
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	struct clk *pa = c->parent_periph;
-	struct clk *bpa = c->parent_cluster;
-
-	if (!(bpa && !pa)) {
-		c->dent = clk_debugfs_register_dir(c,
-				pa ? pa->dent : clk_debugfs_root);
-		if (!c->dent)
-			return -ENOMEM;
-	}
-
-	if (bpa) {
-		c->dent_bus = clk_debugfs_register_dir(c,
-				bpa->dent_bus ? bpa->dent_bus : bpa->dent);
-		if ((!c->dent_bus) &&  (c->dent)) {
-			debugfs_remove_recursive(c->dent);
-			c->dent = NULL;
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent_periph;
-	struct clk *bpa = c->parent_cluster;
-
-	if (pa && (!pa->dent && !pa->dent_bus)) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (bpa && (!bpa->dent && !bpa->dent_bus)) {
-		err = clk_debugfs_register(bpa);
-		if (err)
-			return err;
-	}
-
-	if ((!c->dent) && (!c->dent_bus)) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clk_list, list) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-
-#endif /* defined(CONFIG_DEBUG_FS) */
-
-unsigned long clk_smp_twd_rate = 500000000;
-
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
-	return clk_smp_twd_rate;
-}
-
-static struct clk clk_smp_twd = {
-	.get_rate = clk_smp_twd_get_rate,
-	.name =  "smp_twd",
-};
-
-static struct clk_lookup clk_smp_twd_lookup = {
-	.dev_id = "smp_twd",
-	.clk = &clk_smp_twd,
-};
-
-#ifdef CONFIG_CPU_FREQ
-
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
-				      unsigned long state, void *data)
-{
-	struct cpufreq_freqs *f = data;
-
-	if (state == CPUFREQ_PRECHANGE) {
-		/* Save frequency in simple Hz */
-		clk_smp_twd_rate = (f->new * 1000) / 2;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block clk_twd_cpufreq_nb = {
-	.notifier_call = clk_twd_cpufreq_transition,
-};
-
-int clk_init_smp_twd_cpufreq(void)
-{
-	return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#endif
-
-int __init clk_init(void)
-{
-	clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-	clkdev_add(&clk_smp_twd_lookup);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
deleted file mode 100644
index 65d27a13f46d..000000000000
--- a/arch/arm/mach-ux500/clock.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  Copyright (C) 2010 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct clkops - ux500 clock operations
- * @enable:	function to enable the clock
- * @disable:	function to disable the clock
- * @get_rate:	function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock.  All of these functions are optional.  If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-	unsigned long (*get_rate) (struct clk *);
-	int (*set_parent)(struct clk *, struct clk *);
-};
-
-/**
- * struct clk - ux500 clock structure
- * @ops:		pointer to clkops struct used to control this clock
- * @name:		name, for debugging
- * @enabled:		refcount. positive if enabled, zero if disabled
- * @get_rate:		custom callback for getting the clock rate
- * @data:		custom per-clock data for example for the get_rate
- *			callback
- * @rate:		fixed rate for clocks which don't implement
- * 			ops->getrate
- * @prcmu_cg_off:	address offset of the combined enable/disable register
- * 			(used on u8500v1)
- * @prcmu_cg_bit:	bit in the combined enable/disable register (used on
- * 			u8500v1)
- * @prcmu_cg_mgt:	address of the enable/disable register (used on
- * 			u8500ed)
- * @cluster:		peripheral cluster number
- * @prcc_bus:		bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel:	bit for the kernel clock in the peripheral's CLKRST.
- * 			-1 if no kernel clock exists.
- * @parent_cluster:	pointer to parent's cluster clk struct
- * @parent_periph:	pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock.  Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- * 	(1) the parent cluster (bus) clock at the PRCMU level
- * 	(2) the parent peripheral clock (if any) at the PRCMU level
- * 	(3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
-	const struct clkops	*ops;
-	const char 		*name;
-	unsigned int		enabled;
-	unsigned long		(*get_rate)(struct clk *);
-	void			*data;
-
-	unsigned long		rate;
-	struct list_head	list;
-
-	/* These three are only for PRCMU clks */
-
-	unsigned int		prcmu_cg_off;
-	unsigned int		prcmu_cg_bit;
-	unsigned int		prcmu_cg_mgt;
-
-	/* The rest are only for PRCC clks */
-
-	int			cluster;
-	unsigned int		prcc_bus;
-	unsigned int		prcc_kernel;
-
-	struct clk		*parent_cluster;
-	struct clk		*parent_periph;
-#if defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;		/* For visible tree hierarchy */
-	struct dentry		*dent_bus;	/* For visible tree hierarchy */
-#endif
-};
-
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)		\
-struct clk clk_##_name = {					\
-		.name		= #_name,			\
-		.ops    	= &clk_prcmu_ops, 		\
-		.prcmu_cg_off	= _cg_off, 			\
-		.prcmu_cg_bit	= _cg_bit,			\
-		.prcmu_cg_mgt	= PRCM_##_reg##_MGT		\
-	}
-
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)	\
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops    	= &clk_prcmu_ops, 			\
-		.prcmu_cg_off	= _cg_off, 				\
-		.prcmu_cg_bit	= _cg_bit,				\
-		.rate		= _rate,				\
-		.prcmu_cg_mgt	= PRCM_##_reg##_MGT			\
-	}
-
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)	\
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops    	= &clk_prcc_ops, 			\
-		.cluster 	= _pclust,				\
-		.prcc_bus 	= _bus_en, 				\
-		.prcc_kernel 	= _kernel_en, 				\
-		.parent_cluster = &clk_per##_pclust##clk,		\
-		.parent_periph 	= _kernclk				\
-	}
-
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops		= &clk_prcc_ops,			\
-		.cluster	= _pclust,				\
-		.prcc_bus	= _bus_en,				\
-		.prcc_kernel	= _kernel_en,				\
-		.parent_cluster = &clk_per##_pclust##clk,		\
-		.parent_periph	= _kernclk,				\
-		.get_rate	= _callback,				\
-		.data		= (void *) _data			\
-	}
-
-
-#define CLK(_clk, _devname, _conname)			\
-	{						\
-		.clk	= &clk_##_clk,			\
-		.dev_id	= _devname,			\
-		.con_id = _conname,			\
-	}
-
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
-
-#ifdef CONFIG_DEBUG_FS
-int clk_debugfs_init(void);
-#else
-static inline int clk_debugfs_init(void) { return 0; }
-#endif
-
-#ifdef CONFIG_CPU_FREQ
-int clk_init_smp_twd_cpufreq(void);
-#else
-static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
-#endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index db3c52d56ca4..bcdfe6b1d453 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -18,13 +18,13 @@
 #include <linux/io.h>
 #include <linux/mfd/abx500/ab8500.h>
 
-#include <asm/mach/map.h>
 #include <asm/pmu.h>
+#include <asm/mach/map.h>
 #include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"
@@ -80,7 +80,7 @@ void __init u8500_map_io(void)
 
 	iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
 
-	if (cpu_is_u9540())
+	if (cpu_is_ux540_family())
 		iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
 	else
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
@@ -122,7 +122,7 @@ struct arm_pmu_platdata db8500_pmu_platdata = {
 
 static struct platform_device db8500_pmu_device = {
 	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
+	.id			= -1,
 	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
 	.resource		= db8500_pmu_resources,
 	.dev.platform_data	= &db8500_pmu_platdata,
@@ -138,10 +138,6 @@ static struct platform_device *platform_devs[] __initdata = {
 	&db8500_prcmu_device,
 };
 
-static struct platform_device *of_platform_devs[] __initdata = {
-	&u8500_dma40_device,
-};
-
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
@@ -235,7 +231,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
 struct device * __init u8500_of_init_devices(void)
 {
 	struct device *parent;
-	int i;
 
 	parent = db8500_soc_device_init();
 
@@ -244,8 +239,7 @@ struct device * __init u8500_of_init_devices(void)
 	platform_device_register_data(parent,
 		"cpufreq-u8500", -1, NULL, 0);
 
-	for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++)
-		of_platform_devs[i]->dev.parent = parent;
+	u8500_dma40_device.dev.parent = parent;
 
 	/*
 	 * Devices to be DT:ed:
@@ -253,7 +247,7 @@ struct device * __init u8500_of_init_devices(void)
 	 *   db8500_pmu_device   = done
 	 *   db8500_prcmu_device = done
 	 */
-	platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
+	platform_device_register(&u8500_dma40_device);
 
 	return parent;
 }
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e2360e7c770d..2236cbd03cd7 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,7 +8,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
@@ -17,6 +16,7 @@
 #include <linux/stat.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/platform_data/clk-ux500.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -25,8 +25,6 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 
-#include "clock.h"
-
 void __iomem *_PRCMU_BASE;
 
 /*
@@ -51,7 +49,9 @@ void __init ux500_init_irq(void)
 	void __iomem *dist_base;
 	void __iomem *cpu_base;
 
-	if (cpu_is_u8500_family()) {
+	gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
+
+	if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
 		dist_base = __io_address(U8500_GIC_DIST_BASE);
 		cpu_base = __io_address(U8500_GIC_CPU_BASE);
 	} else
@@ -70,13 +70,17 @@ void __init ux500_init_irq(void)
 	 */
 	if (cpu_is_u8500_family())
 		db8500_prcmu_early_init();
-	clk_init();
+
+	if (cpu_is_u8500_family())
+		u8500_clk_init();
+	else if (cpu_is_u9540())
+		u9540_clk_init();
+	else if (cpu_is_u8540())
+		u8540_clk_init();
 }
 
 void __init ux500_init_late(void)
 {
-	clk_debugfs_init();
-	clk_init_smp_twd_cpufreq();
 }
 
 static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index ecdd8386cffb..7fbf0ba336e1 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -13,7 +13,7 @@
 #include <linux/sys_soc.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_data/i2c-nomadik.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
 
 struct spi_master_cntlr;
 
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index c76f0f456f04..2f6af259015d 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -15,13 +15,18 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
-extern volatile int pen_release;
+#include <mach/setup.h>
 
-static inline void platform_do_lowpower(unsigned int cpu)
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref ux500_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
-	/* we put the platform to just WFI */
+	/* directly enter low power state, skipping secure registers */
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
 				: : : "memory");
@@ -33,28 +38,3 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		}
 	}
 }
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	/* directly enter low power state, skipping secure registers */
-	platform_do_lowpower(cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/arch/arm/mach-ux500/include/mach/crypto-ux500.h
deleted file mode 100644
index 5b2d0817e26a..000000000000
--- a/arch/arm/mach-ux500/include/mach/crypto-ux500.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef _CRYPTO_UX500_H
-#define _CRYPTO_UX500_H
-#include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
-
-struct hash_platform_data {
-	void *mem_to_engine;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-struct cryp_platform_data {
-	struct stedma40_chan_cfg mem_to_engine;
-	struct stedma40_chan_cfg engine_to_mem;
-};
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
deleted file mode 100644
index c01ef66537f3..000000000000
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index c6e2db9e9e51..9c42642ab168 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -41,43 +41,29 @@ static inline bool __attribute_const__ cpu_is_u8500(void)
 	return dbx500_partnumber() == 0x8500;
 }
 
-static inline bool __attribute_const__ cpu_is_u9540(void)
+static inline bool __attribute_const__ cpu_is_u8520(void)
 {
-	return dbx500_partnumber() == 0x9540;
+	return dbx500_partnumber() == 0x8520;
 }
 
 static inline bool cpu_is_u8500_family(void)
 {
-	return cpu_is_u8500() || cpu_is_u9540();
-}
-
-static inline bool __attribute_const__ cpu_is_u5500(void)
-{
-	return dbx500_partnumber() == 0x5500;
-}
-
-/*
- * 5500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u5500v1(void)
-{
-	return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
+	return cpu_is_u8500() || cpu_is_u8520();
 }
 
-static inline bool __attribute_const__ cpu_is_u5500v2(void)
+static inline bool __attribute_const__ cpu_is_u9540(void)
 {
-	return (dbx500_id.revision & 0xf0) == 0xB0;
+	return dbx500_partnumber() == 0x9540;
 }
 
-static inline bool __attribute_const__ cpu_is_u5500v20(void)
+static inline bool __attribute_const__ cpu_is_u8540(void)
 {
-	return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
+	return dbx500_partnumber() == 0x8540;
 }
 
-static inline bool __attribute_const__ cpu_is_u5500v21(void)
+static inline bool cpu_is_ux540_family(void)
 {
-	return cpu_is_u5500() && (dbx500_revision() == 0xB1);
+	return cpu_is_u9540() || cpu_is_u8540();
 }
 
 /*
@@ -119,14 +105,14 @@ static inline bool cpu_is_u8500v21(void)
 	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
 }
 
+static inline bool cpu_is_u8500v22(void)
+{
+	return cpu_is_u8500() && (dbx500_revision() == 0xB2);
+}
+
 static inline bool cpu_is_u8500v20_or_later(void)
 {
-	/*
-	 * U9540 has so much in common with U8500 that is is considered a
-	 * U8500 variant.
-	 */
-	return cpu_is_u9540() ||
-		(cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
+	return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
 static inline bool ux500_is_svp(void)
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 798be19129ef..3cc7142eee02 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -22,8 +22,6 @@ struct msp_i2s_platform_data {
 	enum msp_i2s_id id;
 	struct stedma40_chan_cfg *msp_i2s_dma_rx;
 	struct stedma40_chan_cfg *msp_i2s_dma_tx;
-	int (*msp_i2s_init) (void);
-	int (*msp_i2s_exit) (void);
 };
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 7914e5eaa9c7..6be4c4d2ab88 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -45,4 +45,7 @@ extern struct sys_timer ux500_timer;
 	.type		= MT_MEMORY,		\
 }
 
+extern struct smp_operations ux500_smp_ops;
+extern void ux500_cpu_die(unsigned int cpu);
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 34775baadaea..d60ecd1753f0 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -24,7 +24,7 @@
 #include <linux/amba/serial.h>
 #include <mach/hardware.h>
 
-u32 ux500_uart_base;
+void __iomem *ux500_uart_base;
 
 static void putc(const char c)
 {
@@ -51,7 +51,7 @@ static void flush(void)
 static inline void arch_decomp_setup(void)
 {
 	/* Use machine_is_foo() macro if you need to switch base someday */
-	ux500_uart_base = U8500_UART2_BASE;
+	ux500_uart_base = (void __iomem *)U8500_UART2_BASE;
 }
 
 #define arch_decomp_wdog() /* nothing to do here */
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
deleted file mode 100644
index 4c1cc50a595a..000000000000
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-#include <linux/dmaengine.h>
-
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
-
-struct ux500_musb_board_data {
-	void	**dma_rx_param_array;
-	void	**dma_tx_param_array;
-	u32	num_rx_channels;
-	u32	num_tx_channels;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-void ux500_add_usb(struct device *parent, resource_size_t base,
-		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index da1d5ad5bd45..3db7782f3afb 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -28,12 +28,6 @@
 extern void u8500_secondary_startup(void);
 
 /*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int pen_release = -1;
-
-/*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
@@ -48,7 +42,7 @@ static void write_pen_release(int val)
 
 static void __iomem *scu_base_addr(void)
 {
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		return __io_address(U8500_SCU_BASE);
 	else
 		ux500_unknown_soc();
@@ -58,7 +52,7 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit ux500_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -80,7 +74,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -118,7 +112,7 @@ static void __init wakeup_secondary(void)
 {
 	void __iomem *backupram;
 
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		backupram = __io_address(U8500_BACKUPRAM0_BASE);
 	else
 		ux500_unknown_soc();
@@ -145,7 +139,7 @@ static void __init wakeup_secondary(void)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init ux500_smp_init_cpus(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
@@ -165,9 +159,19 @@ void __init smp_init_cpus(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 {
 
 	scu_enable(scu_base_addr());
 	wakeup_secondary();
 }
+
+struct smp_operations ux500_smp_ops __initdata = {
+	.smp_init_cpus		= ux500_smp_init_cpus,
+	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
+	.smp_secondary_init	= ux500_secondary_init,
+	.smp_boot_secondary	= ux500_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= ux500_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 66e7f00884ab..6f39731951b0 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -54,7 +54,7 @@ static void __init ux500_timer_init(void)
 	void __iomem *tmp_base;
 	struct device_node *np;
 
-	if (cpu_is_u8500_family()) {
+	if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
 		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index a74af389bc63..145482e74418 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -10,7 +10,7 @@
 
 #include <plat/ste_dma40.h>
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-musb-ux500.h>
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index cd8ea3588f93..5b5c1eeb5b5c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -37,7 +37,6 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
 #include <asm/hardware/vic.h>
@@ -169,11 +168,6 @@ static struct map_desc versatile_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
-		.length		= IO_SPACE_LIMIT,
-		.type		= MT_DEVICE
 	},
 #endif
 };
@@ -763,10 +757,6 @@ void __init versatile_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = versatile_leds_event;
-#endif
 }
 
 /*
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-versatile/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 408e58da46c6..3e5d425e2a92 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -29,7 +29,6 @@
  */
 #define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
 #define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-#define VERSATILE_PCI_VIRT_MEM_BASE0	(void __iomem *)PCIO_BASE
 
 /* macro to get at MMIO space when running virtually */
 #define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
deleted file mode 100644
index 0406513be7d8..000000000000
--- a/arch/arm/mach-versatile/include/mach/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define PCIO_BASE	0xeb000000ul
-
-#define __io(a)		((a) + PCIO_BASE)
-
-#endif
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e95bf84cc837..2f84f4094f13 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -169,13 +169,6 @@ static struct pci_ops pci_versatile_ops = {
 	.write	= versatile_write_config,
 };
 
-static struct resource io_port = {
-	.name	= "PCI",
-	.start	= 0,
-	.end	= IO_SPACE_LIMIT,
-	.flags	= IORESOURCE_IO,
-};
-
 static struct resource io_mem = {
 	.name	= "PCI I/O space",
 	.start	= VERSATILE_PCI_MEM_BASE0,
@@ -207,12 +200,6 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 		       "memory region (%d)\n", ret);
 		goto out;
 	}
-	ret = request_resource(&ioport_resource, &io_port);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate I/O "
-		       "port region (%d)\n", ret);
-		goto out;
-	}
 	ret = request_resource(&iomem_resource, &non_mem);
 	if (ret) {
 		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
@@ -227,11 +214,9 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 	}
 
 	/*
-	 * the IO resource for this bus
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
@@ -260,9 +245,11 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
+	ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+	if (ret)
+		goto out;
+
 	if (nr == 0) {
-		sys->mem_offset = 0;
-		sys->io_offset = 0;
 		ret = pci_versatile_setup_resources(sys);
 		if (ret < 0) {
 			printk("pci_versatile_setup: resources... oops?\n");
@@ -319,7 +306,6 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 
 void __init pci_versatile_preinit(void)
 {
-	pcibios_min_io = 0x44000000;
 	pcibios_min_mem = 0x50000000;
 
 	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index fc3730f01650..c95296066203 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,38 +1,23 @@
-menu "Versatile Express platform type"
-	depends on ARCH_VEXPRESS
-
-config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
-	bool "Enable A5 and A9 only errata work-arounds"
-	default y
-	select ARM_ERRATA_720789
-	select ARM_ERRATA_751472
-	select PL310_ERRATA_753970 if CACHE_PL310
-	help
-	  Provides common dependencies for Versatile Express platforms
-	  based on Cortex-A5 and Cortex-A9 processors. In order to
-	  build a working kernel, you must also enable relevant core
-	  tile support or Flattened Device Tree based support options.
-
-config ARCH_VEXPRESS_CA9X4
-	bool "Versatile Express Cortex-A9x4 tile"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_VEXPRESS_DT
-	bool "Device Tree support for Versatile Express platforms"
+config ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
 	select ARM_GIC
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
+	select ARM_TIMER_SP804
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
+	select ICST
 	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
+	select NO_IOPORT
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLCD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
-	  New Versatile Express platforms require Flattened Device Tree to
-	  be passed to the kernel.
-
 	  This option enables support for systems using Cortex processor based
 	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
 	  for example:
@@ -48,7 +33,22 @@ config ARCH_VEXPRESS_DT
 	  platforms. The traditional (ATAGs) boot method is not usable on
 	  these boards with this option.
 
-	  If your bootloader supports Flattened Device Tree based booting,
-	  say Y here.
+menu "Versatile Express platform type"
+	depends on ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+	bool "Enable A5 and A9 only errata work-arounds"
+	default y
+	select ARM_ERRATA_720789
+	select ARM_ERRATA_751472
+	select PL310_ERRATA_753970 if CACHE_PL310
+	help
+	  Provides common dependencies for Versatile Express platforms
+	  based on Cortex-A5 and Cortex-A9 processors. In order to
+	  build a working kernel, you must also enable relevant core
+	  tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_CA9X4
+	bool "Versatile Express Cortex-A9x4 tile"
 
 endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 90551b9780ab..42703e8b4d3b 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -1,6 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-versatile/include
 
 obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
deleted file mode 100644
index 318d308dfb93..000000000000
--- a/arch/arm/mach-vexpress/Makefile.boot
+++ /dev/null
@@ -1,10 +0,0 @@
-# Those numbers are used only by the non-DT V2P-CA9 platform
-# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
-   zreladdr-y	+= 0x60008000
-params_phys-y	:= 0x60000100
-initrd_phys-y	:= 0x60800000
-
-dtb-$(CONFIG_ARCH_VEXPRESS_DT)	+= vexpress-v2p-ca5s.dtb \
-				   vexpress-v2p-ca9.dtb \
-				   vexpress-v2p-ca15-tc1.dtb \
-				   vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index a3a4980770bd..f134cd4a85f1 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -5,3 +5,7 @@
 #define V2T_PERIPH 0xf8200000
 
 void vexpress_dt_smp_map_io(void);
+
+extern struct smp_operations	vexpress_smp_ops;
+
+extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 61c492403b05..4f471fa3e3c5 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -13,7 +13,6 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
-#include <asm/pmu.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 
@@ -27,6 +26,7 @@
 #include "core.h"
 
 #include <mach/motherboard.h>
+#include <mach/irqs.h>
 
 #include <plat/clcd.h>
 
@@ -144,7 +144,7 @@ static struct resource pmu_resources[] = {
 
 static struct platform_device pmu_device = {
 	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pmu_resources),
 	.resource	= pmu_resources,
 };
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index c504a72b94d6..a141b98d84fe 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -16,8 +16,6 @@
 #include <asm/smp_plat.h>
 #include <asm/cp15.h>
 
-extern volatile int pen_release;
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -84,17 +82,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 	}
 }
 
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref vexpress_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
@@ -113,12 +106,3 @@ void platform_cpu_die(unsigned int cpu)
 	if (spurious)
 		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/arch/arm/mach-vexpress/include/mach/gpio.h b/arch/arm/mach-vexpress/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-vexpress/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
index 4b10ee7657a6..f8f7f782eb55 100644
--- a/arch/arm/mach-vexpress/include/mach/irqs.h
+++ b/arch/arm/mach-vexpress/include/mach/irqs.h
@@ -1,4 +1,6 @@
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
 
+#ifndef CONFIG_SPARSE_IRQ
 #define NR_IRQS	256
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h
deleted file mode 100644
index 00029bacd43c..000000000000
--- a/arch/arm/mach-vexpress/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h
deleted file mode 100644
index 1e472eb0bbdc..000000000000
--- a/arch/arm/mach-vexpress/include/mach/uncompress.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-#define UART_BASE	0x10009000
-#define UART_BASE_RS1	0x1c090000
-
-static unsigned long get_uart_base(void)
-{
-#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
-	unsigned long mpcore_periph;
-
-	/*
-	 * Make an educated guess regarding the memory map:
-	 * - the original A9 core tile, which has MPCore peripherals
-	 *   located at 0x1e000000, should use UART at 0x10009000
-	 * - all other (RS1 complaint) tiles use UART mapped
-	 *   at 0x1c090000
-	 */
-	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
-
-	if (mpcore_periph == 0x1e000000)
-		return UART_BASE;
-	else
-		return UART_BASE_RS1;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
-	return UART_BASE;
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
-	return UART_BASE_RS1;
-#else
-	return 0;
-#endif
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	if (!base)
-		return;
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	if (!base)
-		return;
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 14ba1128ae8d..7db27c8c05cc 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -20,9 +20,9 @@
 
 #include <mach/motherboard.h>
 
-#include "core.h"
+#include <plat/platsmp.h>
 
-extern void versatile_secondary_startup(void);
+#include "core.h"
 
 #if defined(CONFIG_OF)
 
@@ -167,7 +167,7 @@ void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
-void __init smp_init_cpus(void)
+static void __init vexpress_smp_init_cpus(void)
 {
 	if (ct_desc)
 		ct_desc->init_cpu_map();
@@ -176,7 +176,7 @@ void __init smp_init_cpus(void)
 
 }
 
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/*
 	 * Initialise the present map, which describes the set of CPUs
@@ -195,3 +195,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 */
 	v2m_flags_set(virt_to_phys(versatile_secondary_startup));
 }
+
+struct smp_operations __initdata vexpress_smp_ops = {
+	.smp_init_cpus		= vexpress_smp_init_cpus,
+	.smp_prepare_cpus	= vexpress_smp_prepare_cpus,
+	.smp_secondary_init	= versatile_secondary_init,
+	.smp_boot_secondary	= versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= vexpress_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 37608f22ee31..560e0df728f8 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -5,6 +5,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
+#include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
@@ -38,6 +39,7 @@
 #include <mach/motherboard.h>
 
 #include <plat/sched_clock.h>
+#include <plat/platsmp.h>
 
 #include "core.h"
 
@@ -530,6 +532,7 @@ static void __init v2m_init(void)
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(vexpress_smp_ops),
 	.map_io		= v2m_map_io,
 	.init_early	= v2m_init_early,
 	.init_irq	= v2m_init_irq,
@@ -539,8 +542,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
 	.restart	= v2m_restart,
 MACHINE_END
 
-#if defined(CONFIG_ARCH_VEXPRESS_DT)
-
 static struct map_desc v2m_rs1_io_desc __initdata = {
 	.virtual	= V2M_PERIPH,
 	.pfn		= __phys_to_pfn(0x1c000000),
@@ -658,11 +659,13 @@ static void __init v2m_dt_init(void)
 
 const static char *v2m_dt_match[] __initconst = {
 	"arm,vexpress",
+	"xen,xenvm",
 	NULL,
 };
 
 DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.dt_compat	= v2m_dt_match,
+	.smp		= smp_ops(vexpress_smp_ops),
 	.map_io		= v2m_dt_map_io,
 	.init_early	= v2m_dt_init_early,
 	.init_irq	= v2m_dt_init_irq,
@@ -671,5 +674,3 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.handle_irq	= gic_handle_irq,
 	.restart	= v2m_restart,
 MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
deleted file mode 100644
index 2c20a341c11a..000000000000
--- a/arch/arm/mach-vt8500/Kconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-if ARCH_VT8500
-
-config VTWM_VERSION_VT8500
-	bool
-
-config VTWM_VERSION_WM8505
-	bool
-
-config MACH_BV07
-	bool "Benign BV07-8500 Mini Netbook"
-	depends on ARCH_VT8500
-	select VTWM_VERSION_VT8500
-	help
-	  Add support for the inexpensive 7-inch netbooks sold by many
-	  Chinese distributors under various names. Note that there are
-	  many hardware implementations in identical exterior, make sure
-	  that yours is indeed based on a VIA VT8500 chip.
-
-config MACH_WM8505_7IN_NETBOOK
-	bool "WM8505 7-inch generic netbook"
-	depends on ARCH_VT8500
-	select VTWM_VERSION_WM8505
-	help
-	  Add support for the inexpensive 7-inch netbooks sold by many
-	  Chinese distributors under various names. Note that there are
-	  many hardware implementations in identical exterior, make sure
-	  that yours is indeed based on a WonderMedia WM8505 chip.
-
-comment "LCD panel size"
-
-config WMT_PANEL_800X480
-	bool "7-inch with 800x480 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	default y
-	help
-	  These are found in most of the netbooks in generic cases, as
-	  well as in Eken M001 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=800x480' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_800X600
-	bool "8-inch with 800x600 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in Eken M003 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=800x600' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_1024X576
-	bool "10-inch with 1024x576 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in CherryPal netbooks and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=1024x576' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_1024X600
-	bool "10-inch with 1024x600 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in Eken M006 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=1024x600' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-endif
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index 7ce51767c99c..e035251cda48 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1,7 +1 @@
-obj-y += devices.o gpio.o irq.o timer.o restart.o
-
-obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
-obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
-
-obj-$(CONFIG_MACH_BV07) += bv07.o
-obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
+obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
deleted file mode 100644
index f9fbeb2d10e9..000000000000
--- a/arch/arm/mach-vt8500/bv07.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/bv07.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/restart.h>
-
-#include "devices.h"
-
-static void __iomem *pmc_hiber;
-
-static struct platform_device *devices[] __initdata = {
-	&vt8500_device_uart0,
-	&vt8500_device_lcdc,
-	&vt8500_device_ehci,
-	&vt8500_device_ge_rops,
-	&vt8500_device_pwm,
-	&vt8500_device_pwmbl,
-	&vt8500_device_rtc,
-};
-
-static void vt8500_power_off(void)
-{
-	local_irq_disable();
-	writew(5, pmc_hiber);
-	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
-}
-
-void __init bv07_init(void)
-{
-#ifdef CONFIG_FB_VT8500
-	void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
-	if (gpio_mux_reg) {
-		writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
-		iounmap(gpio_mux_reg);
-	} else {
-		printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
-	}
-#endif
-	pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
-	if (pmc_hiber)
-		pm_power_off = &vt8500_power_off;
-	else
-		printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-
-	wmt_setup_restart();
-	vt8500_set_resources();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	vt8500_gpio_init();
-}
-
-MACHINE_START(BV07, "Benign BV07 Mini Netbook")
-	.atag_offset	= 0x100,
-	.restart	= wmt_restart,
-	.reserve	= vt8500_reserve_mem,
-	.map_io		= vt8500_map_io,
-	.init_irq	= vt8500_init_irq,
-	.timer		= &vt8500_timer,
-	.init_machine	= bv07_init,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-vt8500/common.h
index a978b3cc3a8d..2b2419646e95 100644
--- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -1,10 +1,6 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
+/* linux/arch/arm/mach-vt8500/dt_common.h
  *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -17,12 +13,16 @@
  *
  */
 
-#ifndef __MACH_TEGRA_GPIO_TEGRA_H
-#define __MACH_TEGRA_GPIO_TEGRA_H
+#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
+#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
+
+#include <linux/of.h>
 
-#include <linux/types.h>
-#include <mach/irqs.h>
+void __init vt8500_timer_init(void);
+int __init vt8500_irq_init(struct device_node *node,
+				struct device_node *parent);
 
-#define TEGRA_NR_GPIOS		INT_GPIO_NR
+/* defined in drivers/clk/clk-vt8500.c */
+void __init vtwm_clk_init(void __iomem *pmc_base);
 
 #endif
diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c
deleted file mode 100644
index 19519aeecf37..000000000000
--- a/arch/arm/mach-vt8500/devices-vt8500.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices-vt8500.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/vt8500_regs.h>
-#include <mach/vt8500_irqs.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-void __init vt8500_set_resources(void)
-{
-	struct resource tmp[3];
-
-	tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
-	tmp[1] = wmt_irq_res(IRQ_LCDC);
-	wmt_res_add(&vt8500_device_lcdc, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART0);
-	wmt_res_add(&vt8500_device_uart0, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART1);
-	wmt_res_add(&vt8500_device_uart1, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART2);
-	wmt_res_add(&vt8500_device_uart2, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART3);
-	wmt_res_add(&vt8500_device_uart3, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
-	tmp[1] = wmt_irq_res(IRQ_EHCI);
-	wmt_res_add(&vt8500_device_ehci, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
-	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
-	wmt_res_add(&vt8500_device_pwm, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
-	tmp[1] = wmt_irq_res(IRQ_RTC);
-	tmp[2] = wmt_irq_res(IRQ_RTCSM);
-	wmt_res_add(&vt8500_device_rtc, tmp, 3);
-}
-
-static void __init vt8500_set_externs(void)
-{
-	/* Non-resource-aware stuff */
-	wmt_ic_base = VT8500_IC_BASE;
-	wmt_gpio_base = VT8500_GPIO_BASE;
-	wmt_pmc_base = VT8500_PMC_BASE;
-	wmt_i8042_base = VT8500_PS2_BASE;
-
-	wmt_nr_irqs = VT8500_NR_IRQS;
-	wmt_timer_irq = IRQ_PMCOS0;
-	wmt_gpio_ext_irq[0] = IRQ_EXT0;
-	wmt_gpio_ext_irq[1] = IRQ_EXT1;
-	wmt_gpio_ext_irq[2] = IRQ_EXT2;
-	wmt_gpio_ext_irq[3] = IRQ_EXT3;
-	wmt_gpio_ext_irq[4] = IRQ_EXT4;
-	wmt_gpio_ext_irq[5] = IRQ_EXT5;
-	wmt_gpio_ext_irq[6] = IRQ_EXT6;
-	wmt_gpio_ext_irq[7] = IRQ_EXT7;
-	wmt_i8042_kbd_irq = IRQ_PS2KBD;
-	wmt_i8042_aux_irq = IRQ_PS2MOUSE;
-}
-
-void __init vt8500_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	/* Should be done before interrupts and timers are initialized */
-	vt8500_set_externs();
-}
diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c
deleted file mode 100644
index db4594e029f4..000000000000
--- a/arch/arm/mach-vt8500/devices-wm8505.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices-wm8505.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/wm8505_regs.h>
-#include <mach/wm8505_irqs.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-void __init wm8505_set_resources(void)
-{
-	struct resource tmp[3];
-
-	tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
-	wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART0);
-	wmt_res_add(&vt8500_device_uart0, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART1);
-	wmt_res_add(&vt8500_device_uart1, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART2);
-	wmt_res_add(&vt8500_device_uart2, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART3);
-	wmt_res_add(&vt8500_device_uart3, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART4);
-	wmt_res_add(&vt8500_device_uart4, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART5);
-	wmt_res_add(&vt8500_device_uart5, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
-	tmp[1] = wmt_irq_res(IRQ_EHCI);
-	wmt_res_add(&vt8500_device_ehci, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
-	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
-	wmt_res_add(&vt8500_device_pwm, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
-	tmp[1] = wmt_irq_res(IRQ_RTC);
-	tmp[2] = wmt_irq_res(IRQ_RTCSM);
-	wmt_res_add(&vt8500_device_rtc, tmp, 3);
-}
-
-static void __init wm8505_set_externs(void)
-{
-	/* Non-resource-aware stuff */
-	wmt_ic_base = WM8505_IC_BASE;
-	wmt_sic_base = WM8505_SIC_BASE;
-	wmt_gpio_base = WM8505_GPIO_BASE;
-	wmt_pmc_base = WM8505_PMC_BASE;
-	wmt_i8042_base = WM8505_PS2_BASE;
-
-	wmt_nr_irqs = WM8505_NR_IRQS;
-	wmt_timer_irq = IRQ_PMCOS0;
-	wmt_gpio_ext_irq[0] = IRQ_EXT0;
-	wmt_gpio_ext_irq[1] = IRQ_EXT1;
-	wmt_gpio_ext_irq[2] = IRQ_EXT2;
-	wmt_gpio_ext_irq[3] = IRQ_EXT3;
-	wmt_gpio_ext_irq[4] = IRQ_EXT4;
-	wmt_gpio_ext_irq[5] = IRQ_EXT5;
-	wmt_gpio_ext_irq[6] = IRQ_EXT6;
-	wmt_gpio_ext_irq[7] = IRQ_EXT7;
-	wmt_i8042_kbd_irq = IRQ_PS2KBD;
-	wmt_i8042_aux_irq = IRQ_PS2MOUSE;
-}
-
-void __init wm8505_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	/* Should be done before interrupts and timers are initialized */
-	wm8505_set_externs();
-}
diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c
deleted file mode 100644
index 1fcdc36b358d..000000000000
--- a/arch/arm/mach-vt8500/devices.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/vt8500fb.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-/* These can't use resources currently */
-unsigned long wmt_ic_base __initdata;
-unsigned long wmt_sic_base __initdata;
-unsigned long wmt_gpio_base __initdata;
-unsigned long wmt_pmc_base __initdata;
-unsigned long wmt_i8042_base __initdata;
-
-int wmt_nr_irqs __initdata;
-int wmt_timer_irq __initdata;
-int wmt_gpio_ext_irq[8] __initdata;
-
-/* Should remain accessible after init.
- * i8042 driver desperately calls for attention...
- */
-int wmt_i8042_kbd_irq;
-int wmt_i8042_aux_irq;
-
-static u64 fb_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device vt8500_device_lcdc = {
-	.name           = "vt8500-lcd",
-	.id             = 0,
-	.dev		= {
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device vt8500_device_wm8505_fb = {
-	.name           = "wm8505-fb",
-	.id             = 0,
-};
-
-/* Smallest to largest */
-static struct vt8500fb_platform_data panels[] = {
-#ifdef CONFIG_WMT_PANEL_800X480
-{
-	.xres_virtual	= 800,
-	.yres_virtual	= 480 * 2,
-	.mode		= {
-		.name		= "800x480",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 0,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_800X600
-{
-	.xres_virtual	= 800,
-	.yres_virtual	= 600 * 2,
-	.mode		= {
-		.name		= "800x600",
-		.xres		= 800,
-		.yres		= 600,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 0,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_1024X576
-{
-	.xres_virtual	= 1024,
-	.yres_virtual	= 576 * 2,
-	.mode		= {
-		.name		= "1024x576",
-		.xres		= 1024,
-		.yres		= 576,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_1024X600
-{
-	.xres_virtual	= 1024,
-	.yres_virtual	= 600 * 2,
-	.mode		= {
-		.name		= "1024x600",
-		.xres		= 1024,
-		.yres		= 600,
-		.left_margin	= 66,
-		.right_margin	= 2,
-		.upper_margin	= 19,
-		.lower_margin	= 1,
-		.hsync_len	= 23,
-		.vsync_len	= 8,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-};
-
-static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
-
-static int __init panel_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(panels); i++) {
-		if (strcmp(panels[i].mode.name, str) == 0) {
-			current_panel_idx = i;
-			break;
-		}
-	}
-	return 0;
-}
-
-early_param("panel", panel_setup);
-
-static inline void preallocate_fb(struct vt8500fb_platform_data *p,
-				  unsigned long align) {
-	p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
-			(p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
-					(8 / p->bpp) + 1));
-	p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
-							  align);
-	p->video_mem_virt = phys_to_virt(p->video_mem_phys);
-}
-
-struct platform_device vt8500_device_uart0 = {
-	.name		= "vt8500_serial",
-	.id		= 0,
-};
-
-struct platform_device vt8500_device_uart1 = {
-	.name		= "vt8500_serial",
-	.id		= 1,
-};
-
-struct platform_device vt8500_device_uart2 = {
-	.name		= "vt8500_serial",
-	.id		= 2,
-};
-
-struct platform_device vt8500_device_uart3 = {
-	.name		= "vt8500_serial",
-	.id		= 3,
-};
-
-struct platform_device vt8500_device_uart4 = {
-	.name		= "vt8500_serial",
-	.id		= 4,
-};
-
-struct platform_device vt8500_device_uart5 = {
-	.name		= "vt8500_serial",
-	.id		= 5,
-};
-
-static u64 ehci_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device vt8500_device_ehci = {
-	.name		= "vt8500-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask	= &ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device vt8500_device_ge_rops = {
-	.name		= "wmt_ge_rops",
-	.id		= -1,
-};
-
-struct platform_device vt8500_device_pwm = {
-	.name		= "vt8500-pwm",
-	.id		= 0,
-};
-
-static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 128,
-	.dft_brightness = 70,
-	.pwm_period_ns	= 250000, /* revisit when clocks are implemented */
-};
-
-struct platform_device vt8500_device_pwmbl = {
-	.name		= "pwm-backlight",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &vt8500_pwmbl_data,
-	},
-};
-
-struct platform_device vt8500_device_rtc = {
-	.name		= "vt8500-rtc",
-	.id		= 0,
-};
-
-struct map_desc wmt_io_desc[] __initdata = {
-	/* SoC MMIO registers */
-	[0] = {
-		.virtual	= 0xf8000000,
-		.pfn		= __phys_to_pfn(0xd8000000),
-		.length		= 0x00390000, /* max of all chip variants */
-		.type		= MT_DEVICE
-	},
-	/* PCI I/O space, numbers tied to those in <mach/io.h> */
-	[1] = {
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xc0000000),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init vt8500_reserve_mem(void)
-{
-#ifdef CONFIG_FB_VT8500
-	panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
-	preallocate_fb(&panels[current_panel_idx], SZ_4M);
-	vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
-#endif
-}
-
-void __init wm8505_reserve_mem(void)
-{
-#if defined CONFIG_FB_WM8505
-	panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
-	preallocate_fb(&panels[current_panel_idx], 32);
-	vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
-#endif
-}
diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h
deleted file mode 100644
index 188d4e17f35c..000000000000
--- a/arch/arm/mach-vt8500/devices.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
-#define __ARCH_ARM_MACH_VT8500_DEVICES_H
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-
-void __init vt8500_init_irq(void);
-void __init wm8505_init_irq(void);
-void __init vt8500_map_io(void);
-void __init wm8505_map_io(void);
-void __init vt8500_reserve_mem(void);
-void __init wm8505_reserve_mem(void);
-void __init vt8500_gpio_init(void);
-void __init vt8500_set_resources(void);
-void __init wm8505_set_resources(void);
-
-extern unsigned long wmt_ic_base __initdata;
-extern unsigned long wmt_sic_base __initdata;
-extern unsigned long wmt_gpio_base __initdata;
-extern unsigned long wmt_pmc_base __initdata;
-
-extern int wmt_nr_irqs __initdata;
-extern int wmt_timer_irq __initdata;
-extern int wmt_gpio_ext_irq[8] __initdata;
-
-extern struct map_desc wmt_io_desc[2] __initdata;
-
-static inline struct resource wmt_mmio_res(u32 start, u32 size)
-{
-	struct resource tmp = {
-		.flags = IORESOURCE_MEM,
-		.start = start,
-		.end = start + size - 1,
-	};
-
-	return tmp;
-}
-
-static inline struct resource wmt_irq_res(int irq)
-{
-	struct resource tmp = {
-		.flags = IORESOURCE_IRQ,
-		.start = irq,
-		.end = irq,
-	};
-
-	return tmp;
-}
-
-static inline void wmt_res_add(struct platform_device *pdev,
-			       const struct resource *res, unsigned int num)
-{
-	if (unlikely(platform_device_add_resources(pdev, res, num)))
-		pr_err("Failed to assign resources\n");
-}
-
-extern struct sys_timer vt8500_timer;
-
-extern struct platform_device vt8500_device_uart0;
-extern struct platform_device vt8500_device_uart1;
-extern struct platform_device vt8500_device_uart2;
-extern struct platform_device vt8500_device_uart3;
-extern struct platform_device vt8500_device_uart4;
-extern struct platform_device vt8500_device_uart5;
-
-extern struct platform_device vt8500_device_lcdc;
-extern struct platform_device vt8500_device_wm8505_fb;
-extern struct platform_device vt8500_device_ehci;
-extern struct platform_device vt8500_device_ge_rops;
-extern struct platform_device vt8500_device_pwm;
-extern struct platform_device vt8500_device_pwmbl;
-extern struct platform_device vt8500_device_rtc;
-#endif
diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c
deleted file mode 100644
index 2bcc0ec783df..000000000000
--- a/arch/arm/mach-vt8500/gpio.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/* linux/arch/arm/mach-vt8500/gpio.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include "devices.h"
-
-#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
-
-#define ENABLE_REGS	0x0
-#define DIRECTION_REGS	0x20
-#define OUTVALUE_REGS	0x40
-#define INVALUE_REGS	0x60
-
-#define EXT_REGOFF	0x1c
-
-static void __iomem *regbase;
-
-struct vt8500_gpio_chip {
-	struct gpio_chip	chip;
-	unsigned int		shift;
-	unsigned int		regoff;
-};
-
-static int gpio_to_irq_map[8];
-
-static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
-				     unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	val |= (1 << vt8500_chip->shift << offset);
-	writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	return 0;
-}
-
-static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
-				   unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	val &= ~(1 << vt8500_chip->shift << offset);
-	writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
-}
-
-static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	val &= ~(1 << vt8500_chip->shift << offset);
-	writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	return 0;
-}
-
-static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	val |= (1 << vt8500_chip->shift << offset);
-	writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	if (value) {
-		val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff);
-		val |= (1 << vt8500_chip->shift << offset);
-		writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff);
-	}
-	return 0;
-}
-
-static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
-	return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff)
-		>> vt8500_chip->shift >> offset) & 1;
-}
-
-static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff);
-
-	if (value)
-		val |= (1 << vt8500_chip->shift << offset);
-	else
-		val &= ~(1 << vt8500_chip->shift << offset);
-
-	writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff);
-}
-
-#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num)		\
-{									\
-	.chip = {							\
-		.label			= __name,			\
-		.request		= vt8500_muxed_gpio_request,	\
-		.free			= vt8500_muxed_gpio_free,	\
-		.direction_input  = vt8500_muxed_gpio_direction_input,	\
-		.direction_output = vt8500_muxed_gpio_direction_output,	\
-		.get			= vt8500_muxed_gpio_get_value,	\
-		.set			= vt8500_muxed_gpio_set_value,	\
-		.can_sleep		= 0,				\
-		.base			= __base,			\
-		.ngpio			= __num,			\
-	},								\
-	.shift		= __shift,					\
-	.regoff		= __off,					\
-}
-
-static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
-	VT8500_GPIO_BANK("uart0",	0,	0x0,	8,	4),
-	VT8500_GPIO_BANK("uart1",	4,	0x0,	12,	4),
-	VT8500_GPIO_BANK("spi0",	8,	0x0,	16,	4),
-	VT8500_GPIO_BANK("spi1",	12,	0x0,	20,	4),
-	VT8500_GPIO_BANK("spi2",	16,	0x0,	24,	4),
-	VT8500_GPIO_BANK("pwmout",	24,	0x0,	28,	2),
-
-	VT8500_GPIO_BANK("sdmmc",	0,	0x4,	30,	11),
-	VT8500_GPIO_BANK("ms",		16,	0x4,	41,	7),
-	VT8500_GPIO_BANK("i2c0",	24,	0x4,	48,	2),
-	VT8500_GPIO_BANK("i2c1",	26,	0x4,	50,	2),
-
-	VT8500_GPIO_BANK("mii",		0,	0x8,	52,	20),
-	VT8500_GPIO_BANK("see",		20,	0x8,	72,	4),
-	VT8500_GPIO_BANK("ide",		24,	0x8,	76,	7),
-
-	VT8500_GPIO_BANK("ccir",	0,	0xc,	83,	19),
-
-	VT8500_GPIO_BANK("ts",		8,	0x10,	102,	11),
-
-	VT8500_GPIO_BANK("lcd",		0,	0x14,	113,	23),
-};
-
-static int vt8500_gpio_direction_input(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	val &= ~(1 << offset);
-	writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
-	return 0;
-}
-
-static int vt8500_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	val |= (1 << offset);
-	writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	if (value) {
-		val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
-		val |= (1 << offset);
-		writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
-	}
-	return 0;
-}
-
-static int vt8500_gpio_get_value(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1;
-}
-
-static void vt8500_gpio_set_value(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
-
-	if (value)
-		val |= (1 << offset);
-	else
-		val &= ~(1 << offset);
-
-	writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
-}
-
-static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 7)
-		return -EINVAL;
-
-	return gpio_to_irq_map[offset];
-}
-
-static struct gpio_chip vt8500_external_gpios = {
-	.label			= "extgpio",
-	.direction_input	= vt8500_gpio_direction_input,
-	.direction_output	= vt8500_gpio_direction_output,
-	.get			= vt8500_gpio_get_value,
-	.set			= vt8500_gpio_set_value,
-	.to_irq			= vt8500_gpio_to_irq,
-	.can_sleep		= 0,
-	.base			= 0,
-	.ngpio			= 8,
-};
-
-void __init vt8500_gpio_init(void)
-{
-	int i;
-
-	for (i = 0; i < 8; i++)
-		gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
-
-	regbase = ioremap(wmt_gpio_base, SZ_64K);
-	if (!regbase) {
-		printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
-		return;
-	}
-
-	gpiochip_add(&vt8500_external_gpios);
-
-	for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
-		gpiochip_add(&vt8500_muxed_gpios[i].chip);
-}
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-vt8500/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h
index 89f9b787d2a0..738979518acb 100644
--- a/arch/arm/mach-vt8500/include/mach/restart.h
+++ b/arch/arm/mach-vt8500/include/mach/restart.h
@@ -13,5 +13,5 @@
  *
  */
 
-void wmt_setup_restart(void);
-void wmt_restart(char mode, const char *cmd);
+void vt8500_setup_restart(void);
+void vt8500_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
deleted file mode 100644
index ecfee9124711..000000000000
--- a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* VT8500 Interrupt Sources */
-
-#define IRQ_JPEGENC	0	/* JPEG Encoder */
-#define IRQ_JPEGDEC	1	/* JPEG Decoder */
-				/* Reserved */
-#define IRQ_PATA	3	/* PATA Controller */
-				/* Reserved */
-#define IRQ_DMA		5	/* DMA Controller */
-#define IRQ_EXT0	6	/* External Interrupt 0 */
-#define IRQ_EXT1	7	/* External Interrupt 1 */
-#define IRQ_GE		8	/* Graphic Engine */
-#define IRQ_GOV		9	/* Graphic Overlay Engine */
-#define IRQ_ETHER	10	/* Ethernet MAC */
-#define IRQ_MPEGTS	11	/* Transport Stream Interface */
-#define IRQ_LCDC	12	/* LCD Controller */
-#define IRQ_EXT2	13	/* External Interrupt 2 */
-#define IRQ_EXT3	14	/* External Interrupt 3 */
-#define IRQ_EXT4	15	/* External Interrupt 4 */
-#define IRQ_CIPHER	16	/* Cipher */
-#define IRQ_VPP		17	/* Video Post-Processor */
-#define IRQ_I2C1	18	/* I2C 1 */
-#define IRQ_I2C0	19	/* I2C 0 */
-#define IRQ_SDMMC	20	/* SD/MMC Controller */
-#define IRQ_SDMMC_DMA	21	/* SD/MMC Controller DMA */
-#define IRQ_PMC_WU	22	/* Power Management Controller Wakeup */
-				/* Reserved */
-#define IRQ_SPI0	24	/* SPI 0 */
-#define IRQ_SPI1	25	/* SPI 1 */
-#define IRQ_SPI2	26	/* SPI 2 */
-#define IRQ_LCDDF	27	/* LCD Data Formatter */
-#define IRQ_NAND	28	/* NAND Flash Controller */
-#define IRQ_NAND_DMA	29	/* NAND Flash Controller DMA */
-#define IRQ_MS		30	/* MemoryStick Controller */
-#define IRQ_MS_DMA	31	/* MemoryStick Controller DMA */
-#define IRQ_UART0	32	/* UART 0 */
-#define IRQ_UART1	33	/* UART 1 */
-#define IRQ_I2S		34	/* I2S */
-#define IRQ_PCM		35	/* PCM */
-#define IRQ_PMCOS0	36	/* PMC OS Timer 0 */
-#define IRQ_PMCOS1	37	/* PMC OS Timer 1 */
-#define IRQ_PMCOS2	38	/* PMC OS Timer 2 */
-#define IRQ_PMCOS3	39	/* PMC OS Timer 3 */
-#define IRQ_VPU		40	/* Video Processing Unit */
-#define IRQ_VID		41	/* Video Digital Input Interface */
-#define IRQ_AC97	42	/* AC97 Interface */
-#define IRQ_EHCI	43	/* USB */
-#define IRQ_NOR		44	/* NOR Flash Controller */
-#define IRQ_PS2MOUSE	45	/* PS/2 Mouse */
-#define IRQ_PS2KBD	46	/* PS/2 Keyboard */
-#define IRQ_UART2	47	/* UART 2 */
-#define IRQ_RTC		48	/* RTC Interrupt */
-#define IRQ_RTCSM	49	/* RTC Second/Minute Update Interrupt */
-#define IRQ_UART3	50	/* UART 3 */
-#define IRQ_ADC		51	/* ADC */
-#define IRQ_EXT5	52	/* External Interrupt 5 */
-#define IRQ_EXT6	53	/* External Interrupt 6 */
-#define IRQ_EXT7	54	/* External Interrupt 7 */
-#define IRQ_CIR		55	/* CIR */
-#define IRQ_DMA0	56	/* DMA Channel 0 */
-#define IRQ_DMA1	57	/* DMA Channel 1 */
-#define IRQ_DMA2	58	/* DMA Channel 2 */
-#define IRQ_DMA3	59	/* DMA Channel 3 */
-#define IRQ_DMA4	60	/* DMA Channel 4 */
-#define IRQ_DMA5	61	/* DMA Channel 5 */
-#define IRQ_DMA6	62	/* DMA Channel 6 */
-#define IRQ_DMA7	63	/* DMA Channel 7 */
-
-#define VT8500_NR_IRQS		64
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
deleted file mode 100644
index 29c63ecb2383..000000000000
--- a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vt8500_regs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
-#define __ASM_ARM_ARCH_VT8500_REGS_H
-
-/* VT8500 Registers Map */
-
-#define VT8500_REGS_START_PHYS	0xd8000000	/* Start of MMIO registers */
-#define VT8500_REGS_START_VIRT	0xf8000000	/* Virtual mapping start */
-
-#define VT8500_DDR_BASE		0xd8000000	/* 1k	DDR/DDR2 Memory
-							Controller */
-#define VT8500_DMA_BASE		0xd8001000	/* 1k	DMA Controller */
-#define VT8500_SFLASH_BASE	0xd8002000	/* 1k	Serial Flash Memory
-							Controller */
-#define VT8500_ETHER_BASE	0xd8004000	/* 1k	Ethernet MAC 0 */
-#define VT8500_CIPHER_BASE	0xd8006000	/* 4k	Cipher */
-#define VT8500_USB_BASE		0xd8007800	/* 2k	USB OTG */
-# define VT8500_EHCI_BASE	0xd8007900	/*	EHCI */
-# define VT8500_UHCI_BASE	0xd8007b01	/*	UHCI */
-#define VT8500_PATA_BASE	0xd8008000	/* 512	PATA */
-#define VT8500_PS2_BASE		0xd8008800	/* 1k	PS/2 */
-#define VT8500_NAND_BASE	0xd8009000	/* 1k	NAND Controller */
-#define VT8500_NOR_BASE		0xd8009400	/* 1k	NOR Controller */
-#define VT8500_SDMMC_BASE	0xd800a000	/* 1k	SD/MMC Controller */
-#define VT8500_MS_BASE		0xd800b000	/* 1k	MS/MSPRO Controller */
-#define VT8500_LCDC_BASE	0xd800e400	/* 1k	LCD Controller */
-#define VT8500_VPU_BASE		0xd8050000	/* 256	VPU */
-#define VT8500_GOV_BASE		0xd8050300	/* 256	GOV */
-#define VT8500_GEGEA_BASE	0xd8050400	/* 768	GE/GE Alpha Mixing */
-#define VT8500_LCDF_BASE	0xd8050900	/* 256	LCD Formatter */
-#define VT8500_VID_BASE		0xd8050a00	/* 256	VID */
-#define VT8500_VPP_BASE		0xd8050b00	/* 256	VPP */
-#define VT8500_TSBK_BASE	0xd80f4000	/* 4k	TSBK */
-#define VT8500_JPEGDEC_BASE	0xd80fe000	/* 4k	JPEG Decoder */
-#define VT8500_JPEGENC_BASE	0xd80ff000	/* 4k	JPEG Encoder */
-#define VT8500_RTC_BASE		0xd8100000	/* 64k	RTC */
-#define VT8500_GPIO_BASE	0xd8110000	/* 64k	GPIO Configuration */
-#define VT8500_SCC_BASE		0xd8120000	/* 64k	System Configuration*/
-#define VT8500_PMC_BASE		0xd8130000	/* 64k	PMC Configuration */
-#define VT8500_IC_BASE		0xd8140000	/* 64k	Interrupt Controller*/
-#define VT8500_UART0_BASE	0xd8200000	/* 64k	UART 0 */
-#define VT8500_UART2_BASE	0xd8210000	/* 64k	UART 2 */
-#define VT8500_PWM_BASE		0xd8220000	/* 64k	PWM Configuration */
-#define VT8500_SPI0_BASE	0xd8240000	/* 64k	SPI 0 */
-#define VT8500_SPI1_BASE	0xd8250000	/* 64k	SPI 1 */
-#define VT8500_CIR_BASE		0xd8270000	/* 64k	CIR */
-#define VT8500_I2C0_BASE	0xd8280000	/* 64k	I2C 0 */
-#define VT8500_AC97_BASE	0xd8290000	/* 64k	AC97 */
-#define VT8500_SPI2_BASE	0xd82a0000	/* 64k	SPI 2 */
-#define VT8500_UART1_BASE	0xd82b0000	/* 64k	UART 1 */
-#define VT8500_UART3_BASE	0xd82c0000	/* 64k	UART 3 */
-#define VT8500_PCM_BASE		0xd82d0000	/* 64k	PCM */
-#define VT8500_I2C1_BASE	0xd8320000	/* 64k	I2C 1 */
-#define VT8500_I2S_BASE		0xd8330000	/* 64k	I2S */
-#define VT8500_ADC_BASE		0xd8340000	/* 64k	ADC */
-
-#define VT8500_REGS_END_PHYS	0xd834ffff	/* End of MMIO registers */
-#define VT8500_REGS_LENGTH	(VT8500_REGS_END_PHYS \
-				- VT8500_REGS_START_PHYS + 1)
-
-#endif
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
deleted file mode 100644
index 7f399c370fe0..000000000000
--- a/arch/arm/mach-vt8500/include/mach/vt8500fb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-	struct fb_videomode	mode;
-	u32			xres_virtual;
-	u32			yres_virtual;
-	u32			bpp;
-	unsigned long		video_mem_phys;
-	void			*video_mem_virt;
-	unsigned long		video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
deleted file mode 100644
index 6128627ac753..000000000000
--- a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* WM8505 Interrupt Sources */
-
-#define IRQ_UHCI	0	/* UHC FS (UHCI?) */
-#define IRQ_EHCI	1	/* UHC HS */
-#define IRQ_UDCDMA	2	/* UDC DMA */
-				/* Reserved */
-#define IRQ_PS2MOUSE	4	/* PS/2 Mouse */
-#define IRQ_UDC		5	/* UDC */
-#define IRQ_EXT0	6	/* External Interrupt 0 */
-#define IRQ_EXT1	7	/* External Interrupt 1 */
-#define IRQ_KEYPAD	8	/* Keypad */
-#define IRQ_DMA		9	/* DMA Controller */
-#define IRQ_ETHER	10	/* Ethernet MAC */
-				/* Reserved */
-				/* Reserved */
-#define IRQ_EXT2	13	/* External Interrupt 2 */
-#define IRQ_EXT3	14	/* External Interrupt 3 */
-#define IRQ_EXT4	15	/* External Interrupt 4 */
-#define IRQ_APB		16	/* APB Bridge */
-#define IRQ_DMA0	17	/* DMA Channel 0 */
-#define IRQ_I2C1	18	/* I2C 1 */
-#define IRQ_I2C0	19	/* I2C 0 */
-#define IRQ_SDMMC	20	/* SD/MMC Controller */
-#define IRQ_SDMMC_DMA	21	/* SD/MMC Controller DMA */
-#define IRQ_PMC_WU	22	/* Power Management Controller Wakeup */
-#define IRQ_PS2KBD	23	/* PS/2 Keyboard */
-#define IRQ_SPI0	24	/* SPI 0 */
-#define IRQ_SPI1	25	/* SPI 1 */
-#define IRQ_SPI2	26	/* SPI 2 */
-#define IRQ_DMA1	27	/* DMA Channel 1 */
-#define IRQ_NAND	28	/* NAND Flash Controller */
-#define IRQ_NAND_DMA	29	/* NAND Flash Controller DMA */
-#define IRQ_UART5	30	/* UART 5 */
-#define IRQ_UART4	31	/* UART 4 */
-#define IRQ_UART0	32	/* UART 0 */
-#define IRQ_UART1	33	/* UART 1 */
-#define IRQ_DMA2	34	/* DMA Channel 2 */
-#define IRQ_I2S		35	/* I2S */
-#define IRQ_PMCOS0	36	/* PMC OS Timer 0 */
-#define IRQ_PMCOS1	37	/* PMC OS Timer 1 */
-#define IRQ_PMCOS2	38	/* PMC OS Timer 2 */
-#define IRQ_PMCOS3	39	/* PMC OS Timer 3 */
-#define IRQ_DMA3	40	/* DMA Channel 3 */
-#define IRQ_DMA4	41	/* DMA Channel 4 */
-#define IRQ_AC97	42	/* AC97 Interface */
-				/* Reserved */
-#define IRQ_NOR		44	/* NOR Flash Controller */
-#define IRQ_DMA5	45	/* DMA Channel 5 */
-#define IRQ_DMA6	46	/* DMA Channel 6 */
-#define IRQ_UART2	47	/* UART 2 */
-#define IRQ_RTC		48	/* RTC Interrupt */
-#define IRQ_RTCSM	49	/* RTC Second/Minute Update Interrupt */
-#define IRQ_UART3	50	/* UART 3 */
-#define IRQ_DMA7	51	/* DMA Channel 7 */
-#define IRQ_EXT5	52	/* External Interrupt 5 */
-#define IRQ_EXT6	53	/* External Interrupt 6 */
-#define IRQ_EXT7	54	/* External Interrupt 7 */
-#define IRQ_CIR		55	/* CIR */
-#define IRQ_SIC0	56	/* SIC IRQ0 */
-#define IRQ_SIC1	57	/* SIC IRQ1 */
-#define IRQ_SIC2	58	/* SIC IRQ2 */
-#define IRQ_SIC3	59	/* SIC IRQ3 */
-#define IRQ_SIC4	60	/* SIC IRQ4 */
-#define IRQ_SIC5	61	/* SIC IRQ5 */
-#define IRQ_SIC6	62	/* SIC IRQ6 */
-#define IRQ_SIC7	63	/* SIC IRQ7 */
-				/* Reserved */
-#define IRQ_JPEGDEC	65	/* JPEG Decoder */
-#define IRQ_SAE		66	/* SAE (?) */
-				/* Reserved */
-#define IRQ_VPU		79	/* Video Processing Unit */
-#define IRQ_VPP		80	/* Video Post-Processor */
-#define IRQ_VID		81	/* Video Digital Input Interface */
-#define IRQ_SPU		82	/* SPU (?) */
-#define IRQ_PIP		83	/* PIP Error */
-#define IRQ_GE		84	/* Graphic Engine */
-#define IRQ_GOV		85	/* Graphic Overlay Engine */
-#define IRQ_DVO		86	/* Digital Video Output */
-				/* Reserved */
-#define IRQ_DMA8	92	/* DMA Channel 8 */
-#define IRQ_DMA9	93	/* DMA Channel 9 */
-#define IRQ_DMA10	94	/* DMA Channel 10 */
-#define IRQ_DMA11	95	/* DMA Channel 11 */
-#define IRQ_DMA12	96	/* DMA Channel 12 */
-#define IRQ_DMA13	97	/* DMA Channel 13 */
-#define IRQ_DMA14	98	/* DMA Channel 14 */
-#define IRQ_DMA15	99	/* DMA Channel 15 */
-				/* Reserved */
-#define IRQ_GOVW	111	/* GOVW (?) */
-#define IRQ_GOVRSDSCD	112	/* GOVR SDSCD (?) */
-#define IRQ_GOVRSDMIF	113	/* GOVR SDMIF (?) */
-#define IRQ_GOVRHDSCD	114	/* GOVR HDSCD (?) */
-#define IRQ_GOVRHDMIF	115	/* GOVR HDMIF (?) */
-
-#define WM8505_NR_IRQS		116
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
deleted file mode 100644
index df1550941efb..000000000000
--- a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/wm8505_regs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
-#define __ASM_ARM_ARCH_WM8505_REGS_H
-
-/* WM8505 Registers Map */
-
-#define WM8505_REGS_START_PHYS	0xd8000000	/* Start of MMIO registers */
-#define WM8505_REGS_START_VIRT	0xf8000000	/* Virtual mapping start */
-
-#define WM8505_DDR_BASE		0xd8000400	/* 1k	DDR/DDR2 Memory
-							Controller */
-#define WM8505_DMA_BASE		0xd8001800	/* 1k	DMA Controller */
-#define WM8505_VDMA_BASE	0xd8001c00	/* 1k	VDMA */
-#define WM8505_SFLASH_BASE	0xd8002000	/* 1k	Serial Flash Memory
-							Controller */
-#define WM8505_ETHER_BASE	0xd8004000	/* 1k	Ethernet MAC 0 */
-#define WM8505_CIPHER_BASE	0xd8006000	/* 4k	Cipher */
-#define WM8505_USB_BASE		0xd8007000	/* 2k	USB 2.0 Host */
-# define WM8505_EHCI_BASE	0xd8007100	/*	EHCI */
-# define WM8505_UHCI_BASE	0xd8007301	/*	UHCI */
-#define WM8505_PS2_BASE		0xd8008800	/* 1k	PS/2 */
-#define WM8505_NAND_BASE	0xd8009000	/* 1k	NAND Controller */
-#define WM8505_NOR_BASE		0xd8009400	/* 1k	NOR Controller */
-#define WM8505_SDMMC_BASE	0xd800a000	/* 1k	SD/MMC Controller */
-#define WM8505_VPU_BASE		0xd8050000	/* 256	VPU */
-#define WM8505_GOV_BASE		0xd8050300	/* 256	GOV */
-#define WM8505_GEGEA_BASE	0xd8050400	/* 768	GE/GE Alpha Mixing */
-#define WM8505_GOVR_BASE	0xd8050800	/* 512	GOVR (frambuffer) */
-#define WM8505_VID_BASE		0xd8050a00	/* 256	VID */
-#define WM8505_SCL_BASE		0xd8050d00	/* 256	SCL */
-#define WM8505_VPP_BASE		0xd8050f00	/* 256	VPP */
-#define WM8505_JPEGDEC_BASE	0xd80fe000	/* 4k	JPEG Decoder */
-#define WM8505_RTC_BASE		0xd8100000	/* 64k	RTC */
-#define WM8505_GPIO_BASE	0xd8110000	/* 64k	GPIO Configuration */
-#define WM8505_SCC_BASE		0xd8120000	/* 64k	System Configuration*/
-#define WM8505_PMC_BASE		0xd8130000	/* 64k	PMC Configuration */
-#define WM8505_IC_BASE		0xd8140000	/* 64k	Interrupt Controller*/
-#define WM8505_SIC_BASE		0xd8150000	/* 64k	Secondary IC */
-#define WM8505_UART0_BASE	0xd8200000	/* 64k	UART 0 */
-#define WM8505_UART2_BASE	0xd8210000	/* 64k	UART 2 */
-#define WM8505_PWM_BASE		0xd8220000	/* 64k	PWM Configuration */
-#define WM8505_SPI0_BASE	0xd8240000	/* 64k	SPI 0 */
-#define WM8505_SPI1_BASE	0xd8250000	/* 64k	SPI 1 */
-#define WM8505_KEYPAD_BASE	0xd8260000	/* 64k	Keypad control */
-#define WM8505_CIR_BASE		0xd8270000	/* 64k	CIR */
-#define WM8505_I2C0_BASE	0xd8280000	/* 64k	I2C 0 */
-#define WM8505_AC97_BASE	0xd8290000	/* 64k	AC97 */
-#define WM8505_SPI2_BASE	0xd82a0000	/* 64k	SPI 2 */
-#define WM8505_UART1_BASE	0xd82b0000	/* 64k	UART 1 */
-#define WM8505_UART3_BASE	0xd82c0000	/* 64k	UART 3 */
-#define WM8505_I2C1_BASE	0xd8320000	/* 64k	I2C 1 */
-#define WM8505_I2S_BASE		0xd8330000	/* 64k	I2S */
-#define WM8505_UART4_BASE	0xd8370000	/* 64k	UART 4 */
-#define WM8505_UART5_BASE	0xd8380000	/* 64k	UART 5 */
-
-#define WM8505_REGS_END_PHYS	0xd838ffff	/* End of MMIO registers */
-#define WM8505_REGS_LENGTH	(WM8505_REGS_END_PHYS \
-				- WM8505_REGS_START_PHYS + 1)
-
-#endif
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
index 642de0408f25..f8f9ab9bc56e 100644
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
@@ -1,6 +1,7 @@
 /*
  *  arch/arm/mach-vt8500/irq.c
  *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
  *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,81 +19,102 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ * This file is copied and modified from the original irq.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 
 #include <asm/irq.h>
 
-#include "devices.h"
 
-#define VT8500_IC_DCTR		0x40		/* Destination control
-						register, 64*u8 */
-#define VT8500_INT_ENABLE	(1 << 3)
-#define VT8500_TRIGGER_HIGH	(0 << 4)
-#define VT8500_TRIGGER_RISING	(1 << 4)
-#define VT8500_TRIGGER_FALLING	(2 << 4)
+#define VT8500_ICPC_IRQ		0x20
+#define VT8500_ICPC_FIQ		0x24
+#define VT8500_ICDC		0x40		/* Destination Control 64*u32 */
+#define VT8500_ICIS		0x80		/* Interrupt status, 16*u32 */
+
+/* ICPC */
+#define ICPC_MASK		0x3F
+#define ICPC_ROTATE		BIT(6)
+
+/* IC_DCTR */
+#define ICDC_IRQ		0x00
+#define ICDC_FIQ		0x01
+#define ICDC_DSS0		0x02
+#define ICDC_DSS1		0x03
+#define ICDC_DSS2		0x04
+#define ICDC_DSS3		0x05
+#define ICDC_DSS4		0x06
+#define ICDC_DSS5		0x07
+
+#define VT8500_INT_DISABLE	0
+#define VT8500_INT_ENABLE	BIT(3)
+
+#define VT8500_TRIGGER_HIGH	0
+#define VT8500_TRIGGER_RISING	BIT(5)
+#define VT8500_TRIGGER_FALLING	BIT(6)
 #define VT8500_EDGE		( VT8500_TRIGGER_RISING \
 				| VT8500_TRIGGER_FALLING)
-#define VT8500_IC_STATUS	0x80		/* Interrupt status, 2*u32 */
 
-static void __iomem *ic_regbase;
-static void __iomem *sic_regbase;
+static int irq_cnt;
+
+struct vt8500_irq_priv {
+	void __iomem *base;
+};
 
 static void vt8500_irq_mask(struct irq_data *d)
 {
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
+	struct vt8500_irq_priv *priv =
+			(struct vt8500_irq_priv *)(d->domain->host_data);
+	void __iomem *base = priv->base;
 	u8 edge;
 
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-	edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
+	edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
 	if (edge) {
-		void __iomem *stat_reg = base + VT8500_IC_STATUS
-						+ (irq < 32 ? 0 : 4);
+		void __iomem *stat_reg = base + VT8500_ICIS
+						+ (d->hwirq < 32 ? 0 : 4);
 		unsigned status = readl(stat_reg);
 
-		status |= (1 << (irq & 0x1f));
+		status |= (1 << (d->hwirq & 0x1f));
 		writel(status, stat_reg);
 	} else {
-		u8 dctr = readb(base + VT8500_IC_DCTR + irq);
+		u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
 
 		dctr &= ~VT8500_INT_ENABLE;
-		writeb(dctr, base + VT8500_IC_DCTR + irq);
+		writeb(dctr, base + VT8500_ICDC + d->hwirq);
 	}
 }
 
 static void vt8500_irq_unmask(struct irq_data *d)
 {
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
+	struct vt8500_irq_priv *priv =
+			(struct vt8500_irq_priv *)(d->domain->host_data);
+	void __iomem *base = priv->base;
 	u8 dctr;
 
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-	dctr = readb(base + VT8500_IC_DCTR + irq);
+	dctr = readb(base + VT8500_ICDC + d->hwirq);
 	dctr |= VT8500_INT_ENABLE;
-	writeb(dctr, base + VT8500_IC_DCTR + irq);
+	writeb(dctr, base + VT8500_ICDC + d->hwirq);
 }
 
 static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
-	unsigned orig_irq = irq;
+	struct vt8500_irq_priv *priv =
+			(struct vt8500_irq_priv *)(d->domain->host_data);
+	void __iomem *base = priv->base;
 	u8 dctr;
 
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-
-	dctr = readb(base + VT8500_IC_DCTR + irq);
+	dctr = readb(base + VT8500_ICDC + d->hwirq);
 	dctr &= ~VT8500_EDGE;
 
 	switch (flow_type) {
@@ -100,18 +122,18 @@ static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 		return -EINVAL;
 	case IRQF_TRIGGER_HIGH:
 		dctr |= VT8500_TRIGGER_HIGH;
-		__irq_set_handler_locked(orig_irq, handle_level_irq);
+		__irq_set_handler_locked(d->irq, handle_level_irq);
 		break;
 	case IRQF_TRIGGER_FALLING:
 		dctr |= VT8500_TRIGGER_FALLING;
-		__irq_set_handler_locked(orig_irq, handle_edge_irq);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 		break;
 	case IRQF_TRIGGER_RISING:
 		dctr |= VT8500_TRIGGER_RISING;
-		__irq_set_handler_locked(orig_irq, handle_edge_irq);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 		break;
 	}
-	writeb(dctr, base + VT8500_IC_DCTR + irq);
+	writeb(dctr, base + VT8500_ICDC + d->hwirq);
 
 	return 0;
 }
@@ -124,57 +146,76 @@ static struct irq_chip vt8500_irq_chip = {
 	.irq_set_type = vt8500_irq_set_type,
 };
 
-void __init vt8500_init_irq(void)
+static void __init vt8500_init_irq_hw(void __iomem *base)
 {
 	unsigned int i;
 
-	ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+	/* Enable rotating priority for IRQ */
+	writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
+	writel(0x00, base + VT8500_ICPC_FIQ);
 
-	if (ic_regbase) {
-		/* Enable rotating priority for IRQ */
-		writel((1 << 6), ic_regbase + 0x20);
-		writel(0, ic_regbase + 0x24);
+	for (i = 0; i < 64; i++) {
+		/* Disable all interrupts and route them to IRQ */
+		writeb(VT8500_INT_DISABLE | ICDC_IRQ,
+						base + VT8500_ICDC + i);
+	}
+}
 
-		for (i = 0; i < wmt_nr_irqs; i++) {
-			/* Disable all interrupts and route them to IRQ */
-			writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
 
-			irq_set_chip_and_handler(i, &vt8500_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID);
-		}
-	} else {
-		printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
-	}
+	return 0;
 }
 
-void __init wm8505_init_irq(void)
+static struct irq_domain_ops vt8500_irq_domain_ops = {
+	.map = vt8500_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
 {
-	unsigned int i;
+	struct irq_domain *vt8500_irq_domain;
+	struct vt8500_irq_priv *priv;
+	int irq, i;
+	struct device_node *np = node;
+
+	priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
+	priv->base = of_iomap(np, 0);
+
+	vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
+				&vt8500_irq_domain_ops, priv);
+	if (!vt8500_irq_domain)
+		pr_err("%s: Unable to add wmt irq domain!\n", __func__);
+
+	irq_set_default_host(vt8500_irq_domain);
+
+	vt8500_init_irq_hw(priv->base);
 
-	ic_regbase = ioremap(wmt_ic_base, SZ_64K);
-	sic_regbase = ioremap(wmt_sic_base, SZ_64K);
-
-	if (ic_regbase && sic_regbase) {
-		/* Enable rotating priority for IRQ */
-		writel((1 << 6), ic_regbase + 0x20);
-		writel(0, ic_regbase + 0x24);
-		writel((1 << 6), sic_regbase + 0x20);
-		writel(0, sic_regbase + 0x24);
-
-		for (i = 0; i < wmt_nr_irqs; i++) {
-			/* Disable all interrupts and route them to IRQ */
-			if (i < 64)
-				writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
-			else
-				writeb(0x00, sic_regbase + VT8500_IC_DCTR
-								+ i - 64);
-
-			irq_set_chip_and_handler(i, &vt8500_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID);
+	pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
+						(u32)(priv->base), irq_cnt);
+
+	/* check if this is a slaved controller */
+	if (of_irq_count(np) != 0) {
+		/* check that we have the correct number of interrupts */
+		if (of_irq_count(np) != 8) {
+			pr_err("%s: Incorrect IRQ map for slave controller\n",
+					__func__);
+			return -EINVAL;
 		}
-	} else {
-		printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+
+		for (i = 0; i < 8; i++) {
+			irq = irq_of_parse_and_map(np, i);
+			enable_irq(irq);
+		}
+
+		pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
 	}
+
+	irq_cnt += 64;
+
+	return 0;
 }
+
diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c
deleted file mode 100644
index 497e89a5e130..000000000000
--- a/arch/arm/mach-vt8500/restart.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-vt8500/restart.c
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <asm/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#define LEGACY_PMC_BASE		0xD8130000
-#define WMT_PRIZM_PMSR_REG	0x60
-
-static void __iomem *pmc_base;
-
-void wmt_setup_restart(void)
-{
-	struct device_node *np;
-
-	/*
-	 * Check if Power Mgmt Controller node is present in device tree. If no
-	 * device tree node, use the legacy PMSR value (valid for all current
-	 * SoCs).
-	 */
-	np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc");
-	if (np) {
-		pmc_base = of_iomap(np, 0);
-
-		if (!pmc_base)
-			pr_err("%s:of_iomap(pmc) failed\n", __func__);
-
-		of_node_put(np);
-	} else {
-		pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
-		if (!pmc_base) {
-			pr_err("%s:ioremap(rstc) failed\n", __func__);
-			return;
-		}
-	}
-}
-
-void wmt_restart(char mode, const char *cmd)
-{
-	if (pmc_base)
-		writel(1, pmc_base + WMT_PRIZM_PMSR_REG);
-}
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
index d5376c592ab6..050e1833f2d0 100644
--- a/arch/arm/mach-vt8500/timer.c
+++ b/arch/arm/mach-vt8500/timer.c
@@ -1,6 +1,7 @@
 /*
- *  arch/arm/mach-vt8500/timer.c
+ *  arch/arm/mach-vt8500/timer_dt.c
  *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
  *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,18 +19,25 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ * This file is copied and modified from the original timer.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/delay.h>
-
 #include <asm/mach/time.h>
 
-#include "devices.h"
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define VT8500_TIMER_OFFSET	0x0100
+#define VT8500_TIMER_HZ		3000000
 #define TIMER_MATCH_VAL		0x0000
 #define TIMER_COUNT_VAL		0x0010
 #define TIMER_STATUS_VAL	0x0014
@@ -39,7 +47,6 @@
 #define TIMER_COUNT_R_ACTIVE	(1 << 5)	/* not ready for read */
 #define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
 #define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
-#define VT8500_TIMER_HZ		3000000
 
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 
@@ -55,7 +62,7 @@ static cycle_t vt8500_timer_read(struct clocksource *cs)
 	return readl(regbase + TIMER_COUNT_VAL);
 }
 
-struct clocksource clocksource = {
+static struct clocksource clocksource = {
 	.name           = "vt8500_timer",
 	.rating         = 200,
 	.read           = vt8500_timer_read,
@@ -98,7 +105,7 @@ static void vt8500_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-struct clock_event_device clockevent = {
+static struct clock_event_device clockevent = {
 	.name           = "vt8500_timer",
 	.features       = CLOCK_EVT_FEAT_ONESHOT,
 	.rating         = 200,
@@ -115,26 +122,51 @@ static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-struct irqaction irq = {
+static struct irqaction irq = {
 	.name    = "vt8500_timer",
 	.flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler = vt8500_timer_interrupt,
 	.dev_id  = &clockevent,
 };
 
-static void __init vt8500_timer_init(void)
+static struct of_device_id vt8500_timer_ids[] = {
+	{ .compatible = "via,vt8500-timer" },
+	{ }
+};
+
+void __init vt8500_timer_init(void)
 {
-	regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
-	if (!regbase)
-		printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
+	struct device_node *np;
+	int timer_irq;
+
+	np = of_find_matching_node(NULL, vt8500_timer_ids);
+	if (!np) {
+		pr_err("%s: Timer description missing from Device Tree\n",
+								__func__);
+		return;
+	}
+	regbase = of_iomap(np, 0);
+	if (!regbase) {
+		pr_err("%s: Missing iobase description in Device Tree\n",
+								__func__);
+		of_node_put(np);
+		return;
+	}
+	timer_irq = irq_of_parse_and_map(np, 0);
+	if (!timer_irq) {
+		pr_err("%s: Missing irq description in Device Tree\n",
+								__func__);
+		of_node_put(np);
+		return;
+	}
 
 	writel(1, regbase + TIMER_CTRL_VAL);
 	writel(0xf, regbase + TIMER_STATUS_VAL);
 	writel(~0, regbase + TIMER_MATCH_VAL);
 
 	if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
-		printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
-					clocksource.name);
+		pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
+					__func__, clocksource.name);
 
 	clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
 
@@ -144,12 +176,9 @@ static void __init vt8500_timer_init(void)
 	clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
 	clockevent.cpumask = cpumask_of(0);
 
-	if (setup_irq(wmt_timer_irq, &irq))
-		printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
-					clockevent.name);
+	if (setup_irq(timer_irq, &irq))
+		pr_err("%s: setup_irq failed for %s\n", __func__,
+							clockevent.name);
 	clockevents_register_device(&clockevent);
 }
 
-struct sys_timer vt8500_timer = {
-	.init = vt8500_timer_init
-};
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
new file mode 100644
index 000000000000..587ea950d08b
--- /dev/null
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -0,0 +1,195 @@
+/*
+ *  arch/arm/mach-vt8500/vt8500.c
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/restart.h>
+
+#include "common.h"
+
+#define LEGACY_GPIO_BASE	0xD8110000
+#define LEGACY_PMC_BASE		0xD8130000
+
+/* Registers in GPIO Controller */
+#define VT8500_GPIO_MUX_REG	0x200
+
+/* Registers in Power Management Controller */
+#define VT8500_HCR_REG		0x12
+#define VT8500_PMSR_REG		0x60
+
+static void __iomem *pmc_base;
+
+void vt8500_restart(char mode, const char *cmd)
+{
+	if (pmc_base)
+		writel(1, pmc_base + VT8500_PMSR_REG);
+}
+
+static struct map_desc vt8500_io_desc[] __initdata = {
+	/* SoC MMIO registers */
+	[0] = {
+		.virtual	= 0xf8000000,
+		.pfn		= __phys_to_pfn(0xd8000000),
+		.length		= 0x00390000, /* max of all chip variants */
+		.type		= MT_DEVICE
+	},
+};
+
+void __init vt8500_map_io(void)
+{
+	iotable_init(vt8500_io_desc, ARRAY_SIZE(vt8500_io_desc));
+}
+
+static void vt8500_power_off(void)
+{
+	local_irq_disable();
+	writew(5, pmc_base + VT8500_HCR_REG);
+	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init vt8500_init(void)
+{
+	struct device_node *np, *fb;
+	void __iomem *gpio_base;
+
+#ifdef CONFIG_FB_VT8500
+	fb = of_find_compatible_node(NULL, NULL, "via,vt8500-fb");
+	if (fb) {
+		np = of_find_compatible_node(NULL, NULL, "via,vt8500-gpio");
+		if (np) {
+			gpio_base = of_iomap(np, 0);
+
+			if (!gpio_base)
+				pr_err("%s: of_iomap(gpio_mux) failed\n",
+								__func__);
+
+			of_node_put(np);
+		} else {
+			gpio_base = ioremap(LEGACY_GPIO_BASE, 0x1000);
+			if (!gpio_base)
+				pr_err("%s: ioremap(legacy_gpio_mux) failed\n",
+								__func__);
+		}
+		if (gpio_base) {
+			writel(readl(gpio_base + VT8500_GPIO_MUX_REG) | 1,
+				gpio_base + VT8500_GPIO_MUX_REG);
+			iounmap(gpio_base);
+		} else
+			pr_err("%s: Could not remap GPIO mux\n", __func__);
+
+		of_node_put(fb);
+	}
+#endif
+
+#ifdef CONFIG_FB_WM8505
+	fb = of_find_compatible_node(NULL, NULL, "wm,wm8505-fb");
+	if (fb) {
+		np = of_find_compatible_node(NULL, NULL, "wm,wm8505-gpio");
+		if (!np)
+			np = of_find_compatible_node(NULL, NULL,
+							"wm,wm8650-gpio");
+		if (np) {
+			gpio_base = of_iomap(np, 0);
+
+			if (!gpio_base)
+				pr_err("%s: of_iomap(gpio_mux) failed\n",
+								__func__);
+
+			of_node_put(np);
+		} else {
+			gpio_base = ioremap(LEGACY_GPIO_BASE, 0x1000);
+			if (!gpio_base)
+				pr_err("%s: ioremap(legacy_gpio_mux) failed\n",
+								__func__);
+		}
+		if (gpio_base) {
+			writel(readl(gpio_base + VT8500_GPIO_MUX_REG) |
+				0x80000000, gpio_base + VT8500_GPIO_MUX_REG);
+			iounmap(gpio_base);
+		} else
+			pr_err("%s: Could not remap GPIO mux\n", __func__);
+
+		of_node_put(fb);
+	}
+#endif
+
+	np = of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+	if (np) {
+		pmc_base = of_iomap(np, 0);
+
+		if (!pmc_base)
+			pr_err("%s:of_iomap(pmc) failed\n", __func__);
+
+		of_node_put(np);
+	} else {
+		pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+		if (!pmc_base)
+			pr_err("%s:ioremap(power_off) failed\n", __func__);
+	}
+	if (pmc_base)
+		pm_power_off = &vt8500_power_off;
+	else
+		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
+
+	vtwm_clk_init(pmc_base);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const struct of_device_id vt8500_irq_match[] __initconst = {
+	{ .compatible = "via,vt8500-intc", .data = vt8500_irq_init, },
+	{ /* sentinel */ },
+};
+
+static void __init vt8500_init_irq(void)
+{
+	of_irq_init(vt8500_irq_match);
+};
+
+static struct sys_timer vt8500_timer = {
+	.init = vt8500_timer_init,
+};
+
+static const char * const vt8500_dt_compat[] = {
+	"via,vt8500",
+	"wm,wm8650",
+	"wm,wm8505",
+};
+
+DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
+	.dt_compat	= vt8500_dt_compat,
+	.map_io		= vt8500_map_io,
+	.init_irq	= vt8500_init_irq,
+	.timer		= &vt8500_timer,
+	.init_machine	= vt8500_init,
+	.restart	= vt8500_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
deleted file mode 100644
index db19886caf7c..000000000000
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/wm8505_7in.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/restart.h>
-
-#include "devices.h"
-
-static void __iomem *pmc_hiber;
-
-static struct platform_device *devices[] __initdata = {
-	&vt8500_device_uart0,
-	&vt8500_device_ehci,
-	&vt8500_device_wm8505_fb,
-	&vt8500_device_ge_rops,
-	&vt8500_device_pwm,
-	&vt8500_device_pwmbl,
-	&vt8500_device_rtc,
-};
-
-static void vt8500_power_off(void)
-{
-	local_irq_disable();
-	writew(5, pmc_hiber);
-	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
-}
-
-void __init wm8505_7in_init(void)
-{
-#ifdef CONFIG_FB_WM8505
-	void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
-	if (gpio_mux_reg) {
-		writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
-		iounmap(gpio_mux_reg);
-	} else {
-		printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
-	}
-#endif
-	pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
-	if (pmc_hiber)
-		pm_power_off = &vt8500_power_off;
-	else
-		printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-	wmt_setup_restart();
-	wm8505_set_resources();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	vt8500_gpio_init();
-}
-
-MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
-	.atag_offset	= 0x100,
-	.restart	= wmt_restart,
-	.reserve	= wm8505_reserve_mem,
-	.map_io		= wm8505_map_io,
-	.init_irq	= wm8505_init_irq,
-	.timer		= &vt8500_timer,
-	.init_machine	= wm8505_7in_init,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 48f5b9fdfb7f..7abdb9645c5b 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -34,11 +34,11 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
 #include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
 #include <mach/regs-ldm.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
 
 #include "cpu.h"
 
diff --git a/arch/arm/mach-w90x900/include/mach/fb.h b/arch/arm/mach-w90x900/include/mach/fb.h
deleted file mode 100644
index cec5ece765ed..000000000000
--- a/arch/arm/mach-w90x900/include/mach/fb.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/include/asm/arch-nuc900/fb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Changelog:
- *
- *   2008/08/26     vincen.zswan modify this file for LCD.
- */
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-
-
-/* LCD Controller Hardware Desc */
-struct nuc900fb_hw {
-	unsigned int lcd_dccs;
-	unsigned int lcd_device_ctrl;
-	unsigned int lcd_mpulcd_cmd;
-	unsigned int lcd_int_cs;
-	unsigned int lcd_crtc_size;
-	unsigned int lcd_crtc_dend;
-	unsigned int lcd_crtc_hr;
-	unsigned int lcd_crtc_hsync;
-	unsigned int lcd_crtc_vr;
-	unsigned int lcd_va_baddr0;
-	unsigned int lcd_va_baddr1;
-	unsigned int lcd_va_fbctrl;
-	unsigned int lcd_va_scale;
-	unsigned int lcd_va_test;
-	unsigned int lcd_va_win;
-	unsigned int lcd_va_stuff;
-};
-
-/* LCD Display Description */
-struct nuc900fb_display {
-	/* LCD Image type */
-	unsigned type;
-
-	/* LCD Screen Size */
-	unsigned short width;
-	unsigned short height;
-
-	/* LCD Screen Info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned long pixclock;
-	unsigned short left_margin;
-	unsigned short right_margin;
-	unsigned short hsync_len;
-	unsigned short upper_margin;
-	unsigned short lower_margin;
-	unsigned short vsync_len;
-
-	/* hardware special register value */
-	unsigned int dccs;
-	unsigned int devctl;
-	unsigned int fbctrl;
-	unsigned int scale;
-};
-
-struct nuc900fb_mach_info {
-	struct nuc900fb_display *displays;
-	unsigned num_displays;
-	unsigned default_display;
-	/* GPIO Setting  Info */
-	unsigned gpio_dir;
-	unsigned gpio_dir_mask;
-	unsigned gpio_data;
-	unsigned gpio_data_mask;
-};
-
-extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-w90x900/include/mach/i2c.h b/arch/arm/mach-w90x900/include/mach/i2c.h
deleted file mode 100644
index 9ffb12d06e91..000000000000
--- a/arch/arm/mach-w90x900/include/mach/i2c.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_ARCH_NUC900_I2C_H
-#define __ASM_ARCH_NUC900_I2C_H
-
-struct nuc900_platform_i2c {
-	int		bus_num;
-	unsigned long   bus_freq;
-};
-
-#endif /* __ASM_ARCH_NUC900_I2C_H */
diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
deleted file mode 100644
index 2c4e0c128501..000000000000
--- a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H
-
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-
-struct nuc900_spi_info {
-	unsigned int num_cs;
-	unsigned int lsb;
-	unsigned int txneg;
-	unsigned int rxneg;
-	unsigned int divider;
-	unsigned int sleep;
-	unsigned int txnum;
-	unsigned int txbitlen;
-	int bus_num;
-};
-
-struct nuc900_spi_chip {
-	unsigned char bits_per_word;
-};
-
-#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
deleted file mode 100644
index 556778e8ddaa..000000000000
--- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_ARCH_W90P910_KEYPAD_H
-#define __ASM_ARCH_W90P910_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-extern void mfp_set_groupi(struct device *dev);
-
-struct w90p910_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	unsigned int	prescale;
-	unsigned int	debounce;
-};
-
-#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 067d8f9166dc..500fe5932ce9 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
 
 #include "nuc950.h"
 
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 9107231aacc5..b9f60ebe3bc4 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -699,7 +699,6 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
 	unsigned long instr = *pinstr;
 	u16 tinst1 = (instr >> 16) & 0xffff;
 	u16 tinst2 = instr & 0xffff;
-	poffset->un = 0;
 
 	switch (tinst1 & 0xffe0) {
 	/* A6.3.5 Load/Store multiple */
@@ -854,9 +853,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		break;
 
 	case 0x08000000:	/* ldm or stm, or thumb-2 32bit instruction */
-		if (thumb2_32b)
+		if (thumb2_32b) {
+			offset.un = 0;
 			handler = do_alignment_t32_to_handler(&instr, regs, &offset);
-		else
+		} else
 			handler = do_alignment_ldmstm;
 		break;
 
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 2a8e380501e8..8a97e6443c62 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -368,14 +368,18 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		/* l2x0 controller is disabled */
 		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
 
-		l2x0_saved_regs.aux_ctrl = aux;
-
 		l2x0_inv_all();
 
 		/* enable L2X0 */
 		writel_relaxed(1, l2x0_base + L2X0_CTRL);
 	}
 
+	/* Re-read it in case some bits are reserved. */
+	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+	/* Save the value for resuming. */
+	l2x0_saved_regs.aux_ctrl = aux;
+
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
 	outer_cache.flush_range = l2x0_flush_range;
@@ -554,7 +558,7 @@ static const struct of_device_id l2x0_ids[] __initconst = {
 int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 {
 	struct device_node *np;
-	struct l2x0_of_data *data;
+	const struct l2x0_of_data *data;
 	struct resource res;
 
 	np = of_find_matching_node(NULL, l2x0_ids);
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 23a7643e9a87..1be0f4e5e6eb 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -15,8 +15,11 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
+#include <asm/cputype.h>
 #include <asm/hardware/cache-tauros2.h>
 
 
@@ -144,25 +147,8 @@ static inline void __init write_extra_features(u32 u)
 	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
 }
 
-static void __init disable_l2_prefetch(void)
-{
-	u32 u;
-
-	/*
-	 * Read the CPU Extra Features register and verify that the
-	 * Disable L2 Prefetch bit is set.
-	 */
-	u = read_extra_features();
-	if (!(u & 0x01000000)) {
-		printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
-		write_extra_features(u | 0x01000000);
-	}
-}
-
 static inline int __init cpuid_scheme(void)
 {
-	extern int processor_id;
-
 	return !!((processor_id & 0x000f0000) == 0x000f0000);
 }
 
@@ -189,12 +175,36 @@ static inline void __init write_actlr(u32 actlr)
 	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
 }
 
-void __init tauros2_init(void)
+static void enable_extra_feature(unsigned int features)
+{
+	u32 u;
+
+	u = read_extra_features();
+
+	if (features & CACHE_TAUROS2_PREFETCH_ON)
+		u &= ~0x01000000;
+	else
+		u |= 0x01000000;
+	printk(KERN_INFO "Tauros2: %s L2 prefetch.\n",
+			(features & CACHE_TAUROS2_PREFETCH_ON)
+			? "Enabling" : "Disabling");
+
+	if (features & CACHE_TAUROS2_LINEFILL_BURST8)
+		u |= 0x00100000;
+	else
+		u &= ~0x00100000;
+	printk(KERN_INFO "Tauros2: %s line fill burt8.\n",
+			(features & CACHE_TAUROS2_LINEFILL_BURST8)
+			? "Enabling" : "Disabling");
+
+	write_extra_features(u);
+}
+
+static void __init tauros2_internal_init(unsigned int features)
 {
-	extern int processor_id;
-	char *mode;
+	char *mode = NULL;
 
-	disable_l2_prefetch();
+	enable_extra_feature(features);
 
 #ifdef CONFIG_CPU_32v5
 	if ((processor_id & 0xff0f0000) == 0x56050000) {
@@ -286,3 +296,34 @@ void __init tauros2_init(void)
 	printk(KERN_INFO "Tauros2: L2 cache support initialised "
 			 "in %s mode.\n", mode);
 }
+
+#ifdef CONFIG_OF
+static const struct of_device_id tauros2_ids[] __initconst = {
+	{ .compatible = "marvell,tauros2-cache"},
+	{}
+};
+#endif
+
+void __init tauros2_init(unsigned int features)
+{
+#ifdef CONFIG_OF
+	struct device_node *node;
+	int ret;
+	unsigned int f;
+
+	node = of_find_matching_node(NULL, tauros2_ids);
+	if (!node) {
+		pr_info("Not found marvell,tauros2-cache, disable it\n");
+		return;
+	}
+
+	ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+	if (ret) {
+		pr_info("Not found marvell,tauros-cache-features property, "
+			"disable extra features\n");
+		features = 0;
+	} else
+		features = f;
+#endif
+	tauros2_internal_init(features);
+}
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 39e3fb3db801..3b172275262e 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -211,6 +211,9 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, fail with -EFAULT.
  */
 9001:
+#ifdef CONFIG_ARM_ERRATA_775420
+	dsb
+#endif
 	mov	r0, #-EFAULT
 	mov	pc, lr
  UNWIND(.fnend		)
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 119bc52ab93e..4e07eec1270d 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
 	pid = task_pid_nr(thread->task) << ASID_BITS;
 	asm volatile(
 	"	mrc	p15, 0, %0, c13, c0, 1\n"
-	"	bfi	%1, %0, #0, %2\n"
-	"	mcr	p15, 0, %1, c13, c0, 1\n"
+	"	and	%0, %0, %2\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c13, c0, 1\n"
 	: "=r" (contextidr), "+r" (pid)
-	: "I" (ASID_BITS));
+	: "I" (~ASID_MASK));
 	isb();
 
 	return NOTIFY_OK;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c2cdf6500f75..477a2d23ddf1 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -73,11 +73,18 @@ static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
 	     struct dma_attrs *attrs)
 {
-	if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 		__dma_page_cpu_to_dev(page, offset, size, dir);
 	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
 }
 
+static dma_addr_t arm_coherent_dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir,
+	     struct dma_attrs *attrs)
+{
+	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
+}
+
 /**
  * arm_dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
@@ -96,7 +103,7 @@ static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir,
 		struct dma_attrs *attrs)
 {
-	if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 		__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
 				      handle & ~PAGE_MASK, size, dir);
 }
@@ -106,8 +113,7 @@ static void arm_dma_sync_single_for_cpu(struct device *dev,
 {
 	unsigned int offset = handle & (PAGE_SIZE - 1);
 	struct page *page = pfn_to_page(dma_to_pfn(dev, handle-offset));
-	if (!arch_is_coherent())
-		__dma_page_dev_to_cpu(page, offset, size, dir);
+	__dma_page_dev_to_cpu(page, offset, size, dir);
 }
 
 static void arm_dma_sync_single_for_device(struct device *dev,
@@ -115,8 +121,7 @@ static void arm_dma_sync_single_for_device(struct device *dev,
 {
 	unsigned int offset = handle & (PAGE_SIZE - 1);
 	struct page *page = pfn_to_page(dma_to_pfn(dev, handle-offset));
-	if (!arch_is_coherent())
-		__dma_page_cpu_to_dev(page, offset, size, dir);
+	__dma_page_cpu_to_dev(page, offset, size, dir);
 }
 
 static int arm_dma_set_mask(struct device *dev, u64 dma_mask);
@@ -138,6 +143,22 @@ struct dma_map_ops arm_dma_ops = {
 };
 EXPORT_SYMBOL(arm_dma_ops);
 
+static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
+	dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs);
+static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
+				  dma_addr_t handle, struct dma_attrs *attrs);
+
+struct dma_map_ops arm_coherent_dma_ops = {
+	.alloc			= arm_coherent_dma_alloc,
+	.free			= arm_coherent_dma_free,
+	.mmap			= arm_dma_mmap,
+	.get_sgtable		= arm_dma_get_sgtable,
+	.map_page		= arm_coherent_dma_map_page,
+	.map_sg			= arm_dma_map_sg,
+	.set_dma_mask		= arm_dma_set_mask,
+};
+EXPORT_SYMBOL(arm_coherent_dma_ops);
+
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = (u64)arm_dma_limit;
@@ -267,17 +288,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 	vunmap(cpu_addr);
 }
 
+#define DEFAULT_DMA_COHERENT_POOL_SIZE	SZ_256K
+
 struct dma_pool {
 	size_t size;
 	spinlock_t lock;
 	unsigned long *bitmap;
 	unsigned long nr_pages;
 	void *vaddr;
-	struct page *page;
+	struct page **pages;
 };
 
 static struct dma_pool atomic_pool = {
-	.size = SZ_256K,
+	.size = DEFAULT_DMA_COHERENT_POOL_SIZE,
 };
 
 static int __init early_coherent_pool(char *p)
@@ -287,6 +310,21 @@ static int __init early_coherent_pool(char *p)
 }
 early_param("coherent_pool", early_coherent_pool);
 
+void __init init_dma_coherent_pool_size(unsigned long size)
+{
+	/*
+	 * Catch any attempt to set the pool size too late.
+	 */
+	BUG_ON(atomic_pool.vaddr);
+
+	/*
+	 * Set architecture specific coherent pool size only if
+	 * it has not been changed by kernel command line parameter.
+	 */
+	if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE)
+		atomic_pool.size = size;
+}
+
 /*
  * Initialise the coherent pool for atomic allocations.
  */
@@ -297,6 +335,7 @@ static int __init atomic_pool_init(void)
 	unsigned long nr_pages = pool->size >> PAGE_SHIFT;
 	unsigned long *bitmap;
 	struct page *page;
+	struct page **pages;
 	void *ptr;
 	int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
 
@@ -304,21 +343,33 @@ static int __init atomic_pool_init(void)
 	if (!bitmap)
 		goto no_bitmap;
 
+	pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
+	if (!pages)
+		goto no_pages;
+
 	if (IS_ENABLED(CONFIG_CMA))
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
 	else
 		ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
 					   &page, NULL);
 	if (ptr) {
+		int i;
+
+		for (i = 0; i < nr_pages; i++)
+			pages[i] = page + i;
+
 		spin_lock_init(&pool->lock);
 		pool->vaddr = ptr;
-		pool->page = page;
+		pool->pages = pages;
 		pool->bitmap = bitmap;
 		pool->nr_pages = nr_pages;
 		pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
 		       (unsigned)pool->size / 1024);
 		return 0;
 	}
+
+	kfree(pages);
+no_pages:
 	kfree(bitmap);
 no_bitmap:
 	pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
@@ -358,7 +409,7 @@ void __init dma_contiguous_remap(void)
 		if (end > arm_lowmem_limit)
 			end = arm_lowmem_limit;
 		if (start >= end)
-			return;
+			continue;
 
 		map.pfn = __phys_to_pfn(start);
 		map.virtual = __phys_to_virt(start);
@@ -423,7 +474,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
 	unsigned int pageno;
 	unsigned long flags;
 	void *ptr = NULL;
-	size_t align;
+	unsigned long align_mask;
 
 	if (!pool->vaddr) {
 		WARN(1, "coherent pool not initialised!\n");
@@ -435,35 +486,53 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
 	 * small, so align them to their order in pages, minimum is a page
 	 * size. This helps reduce fragmentation of the DMA space.
 	 */
-	align = PAGE_SIZE << get_order(size);
+	align_mask = (1 << get_order(size)) - 1;
 
 	spin_lock_irqsave(&pool->lock, flags);
 	pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages,
-					    0, count, (1 << align) - 1);
+					    0, count, align_mask);
 	if (pageno < pool->nr_pages) {
 		bitmap_set(pool->bitmap, pageno, count);
 		ptr = pool->vaddr + PAGE_SIZE * pageno;
-		*ret_page = pool->page + pageno;
+		*ret_page = pool->pages[pageno];
+	} else {
+		pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n"
+			    "Please increase it with coherent_pool= kernel parameter!\n",
+			    (unsigned)pool->size / 1024);
 	}
 	spin_unlock_irqrestore(&pool->lock, flags);
 
 	return ptr;
 }
 
+static bool __in_atomic_pool(void *start, size_t size)
+{
+	struct dma_pool *pool = &atomic_pool;
+	void *end = start + size;
+	void *pool_start = pool->vaddr;
+	void *pool_end = pool->vaddr + pool->size;
+
+	if (start < pool_start || start >= pool_end)
+		return false;
+
+	if (end <= pool_end)
+		return true;
+
+	WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n",
+	     start, end - 1, pool_start, pool_end - 1);
+
+	return false;
+}
+
 static int __free_from_pool(void *start, size_t size)
 {
 	struct dma_pool *pool = &atomic_pool;
 	unsigned long pageno, count;
 	unsigned long flags;
 
-	if (start < pool->vaddr || start > pool->vaddr + pool->size)
+	if (!__in_atomic_pool(start, size))
 		return 0;
 
-	if (start + size > pool->vaddr + pool->size) {
-		WARN(1, "freeing wrong coherent size from pool\n");
-		return 0;
-	}
-
 	pageno = (start - pool->vaddr) >> PAGE_SHIFT;
 	count = size >> PAGE_SHIFT;
 
@@ -538,7 +607,7 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp,
 
 
 static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
-			 gfp_t gfp, pgprot_t prot, const void *caller)
+			 gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller)
 {
 	u64 mask = get_coherent_dma_mask(dev);
 	struct page *page;
@@ -571,7 +640,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
-	if (arch_is_coherent() || nommu())
+	if (is_coherent || nommu())
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
 	else if (gfp & GFP_ATOMIC)
 		addr = __alloc_from_pool(size, &page);
@@ -599,7 +668,20 @@ void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
 		return memory;
 
-	return __dma_alloc(dev, size, handle, gfp, prot,
+	return __dma_alloc(dev, size, handle, gfp, prot, false,
+			   __builtin_return_address(0));
+}
+
+static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
+	dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
+{
+	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
+	return __dma_alloc(dev, size, handle, gfp, prot, true,
 			   __builtin_return_address(0));
 }
 
@@ -636,8 +718,9 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 /*
  * Free a buffer as defined by the above mapping.
  */
-void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-		  dma_addr_t handle, struct dma_attrs *attrs)
+static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
+			   dma_addr_t handle, struct dma_attrs *attrs,
+			   bool is_coherent)
 {
 	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
 
@@ -646,14 +729,14 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 
 	size = PAGE_ALIGN(size);
 
-	if (arch_is_coherent() || nommu()) {
+	if (is_coherent || nommu()) {
 		__dma_free_buffer(page, size);
+	} else if (__free_from_pool(cpu_addr, size)) {
+		return;
 	} else if (!IS_ENABLED(CONFIG_CMA)) {
 		__dma_free_remap(cpu_addr, size);
 		__dma_free_buffer(page, size);
 	} else {
-		if (__free_from_pool(cpu_addr, size))
-			return;
 		/*
 		 * Non-atomic allocations cannot be freed with IRQs disabled
 		 */
@@ -662,6 +745,18 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 	}
 }
 
+void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t handle, struct dma_attrs *attrs)
+{
+	__arm_dma_free(dev, size, cpu_addr, handle, attrs, false);
+}
+
+static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
+				  dma_addr_t handle, struct dma_attrs *attrs)
+{
+	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
+}
+
 int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		 void *cpu_addr, dma_addr_t handle, size_t size,
 		 struct dma_attrs *attrs)
@@ -964,11 +1059,12 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t
 		if (!pages[i])
 			goto error;
 
-		if (order)
+		if (order) {
 			split_page(pages[i], order);
-		j = 1 << order;
-		while (--j)
-			pages[i + j] = pages[i] + j;
+			j = 1 << order;
+			while (--j)
+				pages[i + j] = pages[i] + j;
+		}
 
 		__dma_clear_buffer(pages[i], PAGE_SIZE << order);
 		i += 1 << order;
@@ -1090,10 +1186,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
 	return 0;
 }
 
+static struct page **__atomic_get_pages(void *addr)
+{
+	struct dma_pool *pool = &atomic_pool;
+	struct page **pages = pool->pages;
+	int offs = (addr - pool->vaddr) >> PAGE_SHIFT;
+
+	return pages + offs;
+}
+
 static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 {
 	struct vm_struct *area;
 
+	if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
+		return __atomic_get_pages(cpu_addr);
+
 	if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
 		return cpu_addr;
 
@@ -1103,6 +1211,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 	return NULL;
 }
 
+static void *__iommu_alloc_atomic(struct device *dev, size_t size,
+				  dma_addr_t *handle)
+{
+	struct page *page;
+	void *addr;
+
+	addr = __alloc_from_pool(size, &page);
+	if (!addr)
+		return NULL;
+
+	*handle = __iommu_create_mapping(dev, &page, size);
+	if (*handle == DMA_ERROR_CODE)
+		goto err_mapping;
+
+	return addr;
+
+err_mapping:
+	__free_from_pool(addr, size);
+	return NULL;
+}
+
+static void __iommu_free_atomic(struct device *dev, struct page **pages,
+				dma_addr_t handle, size_t size)
+{
+	__iommu_remove_mapping(dev, handle, size);
+	__free_from_pool(page_address(pages[0]), size);
+}
+
 static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	    dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
@@ -1113,6 +1249,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
+	if (gfp & GFP_ATOMIC)
+		return __iommu_alloc_atomic(dev, size, handle);
+
 	pages = __iommu_alloc_buffer(dev, size, gfp);
 	if (!pages)
 		return NULL;
@@ -1179,6 +1318,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 	}
 
+	if (__in_atomic_pool(cpu_addr, size)) {
+		__iommu_free_atomic(dev, pages, handle, size);
+		return;
+	}
+
 	if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
 		unmap_kernel_range((unsigned long)cpu_addr, size);
 		vunmap(cpu_addr);
@@ -1207,7 +1351,8 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
  */
 static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 			  size_t size, dma_addr_t *handle,
-			  enum dma_data_direction dir, struct dma_attrs *attrs)
+			  enum dma_data_direction dir, struct dma_attrs *attrs,
+			  bool is_coherent)
 {
 	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
 	dma_addr_t iova, iova_base;
@@ -1226,8 +1371,8 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 		phys_addr_t phys = page_to_phys(sg_page(s));
 		unsigned int len = PAGE_ALIGN(s->offset + s->length);
 
-		if (!arch_is_coherent() &&
-		    !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+		if (!is_coherent &&
+			!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 
 		ret = iommu_map(mapping->domain, iova, phys, len, 0);
@@ -1245,20 +1390,9 @@ fail:
 	return ret;
 }
 
-/**
- * arm_iommu_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * The scatter gather list elements are merged together (if possible) and
- * tagged with the appropriate dma address and length. They are obtained via
- * sg_dma_{address,length}.
- */
-int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		     enum dma_data_direction dir, struct dma_attrs *attrs)
+static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		     enum dma_data_direction dir, struct dma_attrs *attrs,
+		     bool is_coherent)
 {
 	struct scatterlist *s = sg, *dma = sg, *start = sg;
 	int i, count = 0;
@@ -1274,7 +1408,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 		if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) {
 			if (__map_sg_chunk(dev, start, size, &dma->dma_address,
-			    dir, attrs) < 0)
+			    dir, attrs, is_coherent) < 0)
 				goto bad_mapping;
 
 			dma->dma_address += offset;
@@ -1287,7 +1421,8 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		}
 		size += s->length;
 	}
-	if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs) < 0)
+	if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs,
+		is_coherent) < 0)
 		goto bad_mapping;
 
 	dma->dma_address += offset;
@@ -1302,17 +1437,44 @@ bad_mapping:
 }
 
 /**
- * arm_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * arm_coherent_iommu_map_sg - map a set of SG buffers for streaming mode DMA
  * @dev: valid struct device pointer
  * @sg: list of buffers
- * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
  *
- * Unmap a set of streaming mode DMA translations.  Again, CPU access
- * rules concerning calls here are the same as for dma_unmap_single().
+ * Map a set of i/o coherent buffers described by scatterlist in streaming
+ * mode for DMA. The scatter gather list elements are merged together (if
+ * possible) and tagged with the appropriate dma address and length. They are
+ * obtained via sg_dma_{address,length}.
  */
-void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-			enum dma_data_direction dir, struct dma_attrs *attrs)
+int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	return __iommu_map_sg(dev, sg, nents, dir, attrs, true);
+}
+
+/**
+ * arm_iommu_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * The scatter gather list elements are merged together (if possible) and
+ * tagged with the appropriate dma address and length. They are obtained via
+ * sg_dma_{address,length}.
+ */
+int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	return __iommu_map_sg(dev, sg, nents, dir, attrs, false);
+}
+
+static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, struct dma_attrs *attrs,
+		bool is_coherent)
 {
 	struct scatterlist *s;
 	int i;
@@ -1321,7 +1483,7 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
 		if (sg_dma_len(s))
 			__iommu_remove_mapping(dev, sg_dma_address(s),
 					       sg_dma_len(s));
-		if (!arch_is_coherent() &&
+		if (!is_coherent &&
 		    !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 			__dma_page_dev_to_cpu(sg_page(s), s->offset,
 					      s->length, dir);
@@ -1329,6 +1491,38 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
 }
 
 /**
+ * arm_coherent_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ *
+ * Unmap a set of streaming mode DMA translations.  Again, CPU access
+ * rules concerning calls here are the same as for dma_unmap_single().
+ */
+void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	__iommu_unmap_sg(dev, sg, nents, dir, attrs, true);
+}
+
+/**
+ * arm_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ *
+ * Unmap a set of streaming mode DMA translations.  Again, CPU access
+ * rules concerning calls here are the same as for dma_unmap_single().
+ */
+void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+			enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	__iommu_unmap_sg(dev, sg, nents, dir, attrs, false);
+}
+
+/**
  * arm_iommu_sync_sg_for_cpu
  * @dev: valid struct device pointer
  * @sg: list of buffers
@@ -1342,8 +1536,7 @@ void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, s, nents, i)
-		if (!arch_is_coherent())
-			__dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir);
+		__dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir);
 
 }
 
@@ -1361,22 +1554,21 @@ void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, s, nents, i)
-		if (!arch_is_coherent())
-			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
+		__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 }
 
 
 /**
- * arm_iommu_map_page
+ * arm_coherent_iommu_map_page
  * @dev: valid struct device pointer
  * @page: page that buffer resides in
  * @offset: offset into page for start of buffer
  * @size: size of buffer to map
  * @dir: DMA transfer direction
  *
- * IOMMU aware version of arm_dma_map_page()
+ * Coherent IOMMU aware version of arm_dma_map_page()
  */
-static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
+static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
 	     struct dma_attrs *attrs)
 {
@@ -1384,9 +1576,6 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
 	dma_addr_t dma_addr;
 	int ret, len = PAGE_ALIGN(size + offset);
 
-	if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
-		__dma_page_cpu_to_dev(page, offset, size, dir);
-
 	dma_addr = __alloc_iova(mapping, len);
 	if (dma_addr == DMA_ERROR_CODE)
 		return dma_addr;
@@ -1402,6 +1591,51 @@ fail:
 }
 
 /**
+ * arm_iommu_map_page
+ * @dev: valid struct device pointer
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * IOMMU aware version of arm_dma_map_page()
+ */
+static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir,
+	     struct dma_attrs *attrs)
+{
+	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+		__dma_page_cpu_to_dev(page, offset, size, dir);
+
+	return arm_coherent_iommu_map_page(dev, page, offset, size, dir, attrs);
+}
+
+/**
+ * arm_coherent_iommu_unmap_page
+ * @dev: valid struct device pointer
+ * @handle: DMA address of buffer
+ * @size: size of buffer (same as passed to dma_map_page)
+ * @dir: DMA transfer direction (same as passed to dma_map_page)
+ *
+ * Coherent IOMMU aware version of arm_dma_unmap_page()
+ */
+static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	dma_addr_t iova = handle & PAGE_MASK;
+	int offset = handle & ~PAGE_MASK;
+	int len = PAGE_ALIGN(size + offset);
+
+	if (!iova)
+		return;
+
+	iommu_unmap(mapping->domain, iova, len);
+	__free_iova(mapping, iova, len);
+}
+
+/**
  * arm_iommu_unmap_page
  * @dev: valid struct device pointer
  * @handle: DMA address of buffer
@@ -1423,7 +1657,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
 	if (!iova)
 		return;
 
-	if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 		__dma_page_dev_to_cpu(page, offset, size, dir);
 
 	iommu_unmap(mapping->domain, iova, len);
@@ -1441,8 +1675,7 @@ static void arm_iommu_sync_single_for_cpu(struct device *dev,
 	if (!iova)
 		return;
 
-	if (!arch_is_coherent())
-		__dma_page_dev_to_cpu(page, offset, size, dir);
+	__dma_page_dev_to_cpu(page, offset, size, dir);
 }
 
 static void arm_iommu_sync_single_for_device(struct device *dev,
@@ -1476,6 +1709,19 @@ struct dma_map_ops iommu_ops = {
 	.sync_sg_for_device	= arm_iommu_sync_sg_for_device,
 };
 
+struct dma_map_ops iommu_coherent_ops = {
+	.alloc		= arm_iommu_alloc_attrs,
+	.free		= arm_iommu_free_attrs,
+	.mmap		= arm_iommu_mmap_attrs,
+	.get_sgtable	= arm_iommu_get_sgtable,
+
+	.map_page	= arm_coherent_iommu_map_page,
+	.unmap_page	= arm_coherent_iommu_unmap_page,
+
+	.map_sg		= arm_coherent_iommu_map_sg,
+	.unmap_sg	= arm_coherent_iommu_unmap_sg,
+};
+
 /**
  * arm_iommu_create_mapping
  * @bus: pointer to the bus holding the client device (for IOMMU calls)
@@ -1569,7 +1815,7 @@ int arm_iommu_attach_device(struct device *dev,
 	dev->archdata.mapping = mapping;
 	set_dma_ops(dev, &iommu_ops);
 
-	pr_info("Attached IOMMU controller to %s device.\n", dev_name(dev));
+	pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev));
 	return 0;
 }
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 77458548e031..40ca11ed6e5f 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 9aec41fa80ae..ad722f1208a5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -324,7 +324,7 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 
 	BUG_ON(!arm_memblock_steal_permitted);
 
-	phys = memblock_alloc(size, align);
+	phys = memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE);
 	memblock_free(phys, size);
 	memblock_remove(phys, size);
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 566750fa57d4..5dcc2fd46c46 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -36,6 +36,7 @@
 #include <asm/system_info.h>
 
 #include <asm/mach/map.h>
+#include <asm/mach/pci.h>
 #include "mm.h"
 
 int ioremap_page(unsigned long virt, unsigned long phys,
@@ -247,6 +248,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
  	if (!area)
  		return NULL;
  	addr = (unsigned long)area->addr;
+	area->phys_addr = __pfn_to_phys(pfn);
 
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 	if (DOMAIN_IO == 0 &&
@@ -383,3 +385,16 @@ void __arm_iounmap(volatile void __iomem *io_addr)
 	arch_iounmap(io_addr);
 }
 EXPORT_SYMBOL(__arm_iounmap);
+
+#ifdef CONFIG_PCI
+int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
+{
+	BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+
+	return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
+				  PCI_IO_VIRT_BASE + offset + SZ_64K,
+				  phys_addr,
+				  __pgprot(get_mem_type(MT_DEVICE)->prot_pte));
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_io);
+#endif
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 6776160618ef..a8ee92da3544 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 /* permanent static mappings from iotable_init() */
 #define VM_ARM_STATIC_MAPPING	0x40000000
 
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING	0x20000000
+
 /* mapping type (attributes) for permanent static mappings */
 #define VM_ARM_MTYPE(mt)		((mt) << 20)
 #define VM_ARM_MTYPE_MASK	(0x1f << 20)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4c2d0451e84a..941dfb9e9a78 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -31,6 +31,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/pci.h>
 
 #include "mm.h"
 
@@ -216,7 +217,7 @@ static struct mem_type mem_types[] = {
 		.prot_l1	= PMD_TYPE_TABLE,
 		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_WB,
 		.domain		= DOMAIN_IO,
-	},	
+	},
 	[MT_DEVICE_WC] = {	/* ioremap_wc */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
 		.prot_l1	= PMD_TYPE_TABLE,
@@ -422,17 +423,6 @@ static void __init build_mem_type_table(void)
 	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 
 	/*
-	 * Enable CPU-specific coherency if supported.
-	 * (Only available on XSC3 at the moment.)
-	 */
-	if (arch_is_coherent() && cpu_is_xsc3()) {
-		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
-	}
-	/*
 	 * ARMv6 and above have extended page tables.
 	 */
 	if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
@@ -777,14 +767,27 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(md);
 		vm->addr = (void *)(md->virtual & PAGE_MASK);
 		vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
-		vm->phys_addr = __pfn_to_phys(md->pfn); 
-		vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; 
+		vm->phys_addr = __pfn_to_phys(md->pfn);
+		vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
 		vm->flags |= VM_ARM_MTYPE(md->type);
 		vm->caller = iotable_init;
 		vm_area_add_early(vm++);
 	}
 }
 
+void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
+				  void *caller)
+{
+	struct vm_struct *vm;
+
+	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+	vm->addr = (void *)addr;
+	vm->size = size;
+	vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
+	vm->caller = caller;
+	vm_area_add_early(vm);
+}
+
 #ifndef CONFIG_ARM_LPAE
 
 /*
@@ -802,14 +805,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 
 static void __init pmd_empty_section_gap(unsigned long addr)
 {
-	struct vm_struct *vm;
-
-	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
-	vm->addr = (void *)addr;
-	vm->size = SECTION_SIZE;
-	vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
-	vm->caller = pmd_empty_section_gap;
-	vm_area_add_early(vm);
+	vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap);
 }
 
 static void __init fill_pmd_gaps(void)
@@ -820,7 +816,7 @@ static void __init fill_pmd_gaps(void)
 
 	/* we're still single threaded hence no lock needed here */
 	for (vm = vmlist; vm; vm = vm->next) {
-		if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+		if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
 			continue;
 		addr = (unsigned long)vm->addr;
 		if (addr < next)
@@ -858,6 +854,28 @@ static void __init fill_pmd_gaps(void)
 #define fill_pmd_gaps() do { } while (0)
 #endif
 
+#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
+static void __init pci_reserve_io(void)
+{
+	struct vm_struct *vm;
+	unsigned long addr;
+
+	/* we're still single threaded hence no lock needed here */
+	for (vm = vmlist; vm; vm = vm->next) {
+		if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+			continue;
+		addr = (unsigned long)vm->addr;
+		addr &= ~(SZ_2M - 1);
+		if (addr == PCI_IO_VIRT_BASE)
+			return;
+
+	}
+	vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io);
+}
+#else
+#define pci_reserve_io() do { } while (0)
+#endif
+
 static void * __initdata vmalloc_min =
 	(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 
@@ -961,8 +979,8 @@ void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would partially overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start + bank->size) > vmalloc_min ||
-		    __va(bank->start + bank->size) < __va(bank->start)) {
+		if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
+		    __va(bank->start + bank->size - 1) <= __va(bank->start)) {
 			unsigned long newsize = vmalloc_min - __va(bank->start);
 			printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
 			       "to -%.8llx (vmalloc region overlap).\n",
@@ -1141,6 +1159,9 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 		mdesc->map_io();
 	fill_pmd_gaps();
 
+	/* Reserve fixed i/o space in VMALLOC region */
+	pci_reserve_io();
+
 	/*
 	 * Finally flush the caches and tlb to ensure that we're in a
 	 * consistent state wrt the writebuffer.  This also ensures that
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index c2021139cb56..ea94765acf9a 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	dsb
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
-#ifdef CONFIG_ARM_ERRATA_720789
-	mov	r3, #0
-#else
 	asid	r3, r3				@ mask ASID
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(W(mov)	r3, #0	)
+	ALT_UP(W(nop)		)
 #endif
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 8daae9b230ea..362474b5c40d 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -192,30 +192,24 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 	if (nr != 0)
 		return 0;
 
-	res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (!res)
 		panic("PCI: unable to alloc resources");
 
-	res[0].start = IOP3XX_PCI_LOWER_IO_PA;
-	res[0].end   = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
-	res[0].name  = "IOP3XX PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	request_resource(&ioport_resource, &res[0]);
-
-	res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
-	res[1].name  = "IOP3XX PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	request_resource(&iomem_resource, &res[1]);
+	res->start = IOP3XX_PCI_LOWER_MEM_PA;
+	res->end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+	res->name  = "IOP3XX PCI Memory Space";
+	res->flags = IORESOURCE_MEM;
+	request_resource(&iomem_resource, res);
 
 	/*
 	 * Use whatever translation is already setup.
 	 */
 	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-	sys->io_offset  = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
 
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
+
+	pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA);
 
 	return 1;
 }
@@ -367,7 +361,6 @@ void __init iop3xx_pci_preinit_cond(void)
 
 void __init iop3xx_pci_preinit(void)
 {
-	pcibios_min_io = 0;
 	pcibios_min_mem = 0;
 
 	iop3xx_atu_disable();
diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c
index a2024b8685a1..ad9f9744a82d 100644
--- a/arch/arm/plat-iop/pmu.c
+++ b/arch/arm/plat-iop/pmu.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <asm/pmu.h>
 #include <mach/irqs.h>
 
 static struct resource pmu_resource = {
@@ -26,7 +25,7 @@ static struct resource pmu_resource = {
 
 static struct platform_device pmu_device = {
 	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
+	.id		= -1,
 	.resource	= &pmu_resource,
 	.num_resources	= 1,
 };
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
index bade586fed0f..5b217f460f18 100644
--- a/arch/arm/plat-iop/setup.c
+++ b/arch/arm/plat-iop/setup.c
@@ -25,11 +25,6 @@ static struct map_desc iop3xx_std_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
 		.length		= IOP3XX_PERIPHERAL_SIZE,
 		.type		= MT_UNCACHED,
-	 }, {	/* PCI IO space */
-		.virtual	= IOP3XX_PCI_LOWER_IO_VA,
-		.pfn		= __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
-		.length		= IOP3XX_PCI_IO_WINDOW_SIZE,
-		.type		= MT_DEVICE,
 	 },
 };
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6ac720031150..149237e24850 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := time.o devices.o cpu.o system.o irq-common.o
 
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
deleted file mode 100644
index 5079787273d2..000000000000
--- a/arch/arm/plat-mxc/clock.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-#ifndef CONFIG_COMMON_CLK
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-	WARN_ON(!clk->usecount);
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		__clk_disable(clk->parent);
-		__clk_disable(clk->secondary);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->usecount++ == 0) {
-		__clk_enable(clk->parent);
-		__clk_enable(clk->secondary);
-
-		if (clk->enable)
-			clk->enable(clk);
-	}
-	return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-	struct clk *old;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
-	    IS_ERR(parent) || clk->set_parent == NULL)
-		return ret;
-
-	if (clk->usecount)
-		clk_enable(parent);
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_parent(clk, parent);
-	if (ret == 0) {
-		old = clk->parent;
-		clk->parent = parent;
-	} else {
-		old = parent;
-	}
-	mutex_unlock(&clocks_mutex);
-
-	if (clk->usecount)
-		clk_disable(old);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	struct clk *ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-#else
-
-/*
- * Lock to protect the clock module (ccm) registers. Used
- * on all i.MXs
- */
-DEFINE_SPINLOCK(imx_ccm_lock);
-
-#endif /* CONFIG_COMMON_CLK */
-
-/*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can at least be found on
- * MX1, MX21, MX27 and MX31
- *
- *                  mfi + mfn / (mfd + 1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
-{
-	long long ll;
-	int mfn_abs;
-	unsigned int mfi, mfn, mfd, pd;
-
-	mfi = (reg_val >> 10) & 0xf;
-	mfn = reg_val & 0x3ff;
-	mfd = (reg_val >> 16) & 0x3ff;
-	pd =  (reg_val >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	mfn_abs = mfn;
-
-	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
-	 * 2's complements number
-	 */
-	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
-		mfn_abs = 0x400 - mfn;
-
-	freq *= 2;
-	freq /= pd + 1;
-
-	ll = (unsigned long long)freq * mfn_abs;
-
-	do_div(ll, mfd + 1);
-
-	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
-		ll = -ll;
-
-	ll = (freq * mfi) + ll;
-
-	return ll;
-}
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 73db34bf588a..b5b6f8083130 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -23,7 +23,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <mach/hardware.h>
-#include <mach/clock.h>
 
 #define CLK32_FREQ	32768
 #define NANOSECOND	(1000 * 1000 * 1000)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index cb3e3eef55c0..6b46cee2f9cd 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -15,7 +15,11 @@ config IMX_HAVE_PLATFORM_GPIO_KEYS
 
 config IMX_HAVE_PLATFORM_IMX21_HCD
 	bool
-	
+
+config IMX_HAVE_PLATFORM_IMX27_CODA
+	bool
+	default y if SOC_IMX27
+
 config IMX_HAVE_PLATFORM_IMX2_WDT
 	bool
 
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index c11ac8472beb..76f3195475d0 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
 obj-y += platform-gpio-mxc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
 obj-y += platform-imx-dma.o
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 2020d84956c3..d390f00bd294 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -87,7 +87,7 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX35
 const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 #define imx35_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+	imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
 	imx35_imx_uart_data_entry(0, 1),
 	imx35_imx_uart_data_entry(1, 2),
 	imx35_imx_uart_data_entry(2, 3),
diff --git a/arch/arm/plat-mxc/devices/platform-imx27-coda.c b/arch/arm/plat-mxc/devices/platform-imx27-coda.c
new file mode 100644
index 000000000000..8b12aacdf396
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx27-coda.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Vista Silicon
+ * Javier Martin <javier.martin@vista-silicon.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx27_coda_data imx27_coda_data __initconst = {
+	.iobase = MX27_VPU_BASE_ADDR,
+	.iosize = SZ_512,
+	.irq = MX27_INT_VPU,
+};
+#endif
+
+struct platform_device *__init imx_add_imx27_coda(
+		const struct imx_imx27_coda_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
+					0, DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
index 5955f5da82ee..3793e475cd95 100644
--- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
@@ -8,7 +8,7 @@
 
 #include <mach/hardware.h>
 #include <mach/devices-common.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
 
 #define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
 	{								\
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
deleted file mode 100644
index bd940c795cbb..000000000000
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-#ifndef CONFIG_COMMON_CLK
-struct module;
-
-struct clk {
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	void __iomem *enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-#endif /* CONFIG_COMMON_CLK */
-
-extern spinlock_t imx_ccm_lock;
-
-unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7128e9710417..ead901814c0d 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -52,7 +52,6 @@ extern void imx31_soc_init(void);
 extern void imx35_soc_init(void);
 extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
-extern void imx53_soc_init(void);
 extern void imx51_init_late(void);
 extern void imx53_init_late(void);
 extern void epit_timer_init(void __iomem *base, int irq);
@@ -137,14 +136,11 @@ extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
-extern void imx51_babbage_common_init(void);
-extern void imx53_ard_common_init(void);
-extern void imx53_evk_common_init(void);
-extern void imx53_qsb_common_init(void);
-extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 
+extern void imx_cpu_die(unsigned int cpu);
+
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
 extern void imx51_pm_init(void);
@@ -161,4 +157,6 @@ extern int mx51_neon_fixup(void);
 static inline int mx51_neon_fixup(void) { return 0; }
 #endif
 
+extern struct smp_operations imx_smp_ops;
+
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index a7f5bb1084d7..eaf79d220c9a 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -9,7 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
-#include <mach/sdma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
 
 extern struct device mxc_aips_bus;
 extern struct device mxc_ahb_bus;
@@ -74,7 +74,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 struct platform_device *__init imx_add_gpio_keys(
 		const struct gpio_keys_platform_data *pdata);
 
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
 struct imx_imx21_hcd_data {
 	resource_size_t iobase;
 	resource_size_t irq;
@@ -83,6 +83,14 @@ struct platform_device *__init imx_add_imx21_hcd(
 		const struct imx_imx21_hcd_data *data,
 		const struct mx21_usbh_platform_data *pdata);
 
+struct imx_imx27_coda_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx27_coda(
+		const struct imx_imx27_coda_data *data);
+
 struct imx_imx2_wdt_data {
 	int id;
 	resource_size_t iobase;
@@ -98,7 +106,7 @@ struct imx_imxdi_rtc_data {
 struct platform_device *__init imx_add_imxdi_rtc(
 		const struct imx_imxdi_rtc_data *data);
 
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
 struct imx_imx_fb_data {
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -108,7 +116,7 @@ struct platform_device *__init imx_add_imx_fb(
 		const struct imx_imx_fb_data *data,
 		const struct imx_fb_platform_data *pdata);
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
 struct imx_imx_i2c_data {
 	int id;
 	resource_size_t iobase;
@@ -129,7 +137,7 @@ struct platform_device *__init imx_add_imx_keypad(
 		const struct imx_imx_keypad_data *data,
 		const struct matrix_keymap_data *pdata);
 
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 struct imx_imx_ssi_data {
 	int id;
 	resource_size_t iobase;
@@ -144,7 +152,7 @@ struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_imx_ssi_data *data,
 		const struct imx_ssi_platform_data *pdata);
 
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
 struct imx_imx_uart_3irq_data {
 	int id;
 	resource_size_t iobase;
@@ -167,7 +175,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata);
 
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
 struct imx_imx_udc_data {
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -183,8 +191,8 @@ struct platform_device *__init imx_add_imx_udc(
 		const struct imx_imx_udc_data *data,
 		const struct imxusb_platform_data *pdata);
 
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
+#include <linux/platform_data/video-mx3fb.h>
+#include <linux/platform_data/camera-mx3.h>
 struct imx_ipu_core_data {
 	resource_size_t iobase;
 	resource_size_t synirq;
@@ -199,7 +207,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
 struct imx_mx1_camera_data {
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -209,7 +217,7 @@ struct platform_device *__init imx_add_mx1_camera(
 		const struct imx_mx1_camera_data *data,
 		const struct mx1_camera_pdata *pdata);
 
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
 struct imx_mx2_camera_data {
 	resource_size_t iobasecsi;
 	resource_size_t iosizecsi;
@@ -224,7 +232,7 @@ struct platform_device *__init imx_add_mx2_camera(
 struct platform_device *__init imx_add_mx2_emmaprp(
 		const struct imx_mx2_camera_data *data);
 
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 struct imx_mxc_ehci_data {
 	int id;
 	resource_size_t iobase;
@@ -234,7 +242,7 @@ struct platform_device *__init imx_add_mxc_ehci(
 		const struct imx_mxc_ehci_data *data,
 		const struct mxc_usbh_platform_data *pdata);
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
 struct imx_mxc_mmc_data {
 	int id;
 	resource_size_t iobase;
@@ -246,7 +254,7 @@ struct platform_device *__init imx_add_mxc_mmc(
 		const struct imx_mxc_mmc_data *data,
 		const struct imxmmc_platform_data *pdata);
 
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
 struct imx_mxc_nand_data {
 	/*
 	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
@@ -295,7 +303,7 @@ struct imx_mxc_w1_data {
 struct platform_device *__init imx_add_mxc_w1(
 		const struct imx_mxc_w1_data *data);
 
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
 struct imx_sdhci_esdhc_imx_data {
 	const char *devid;
 	int id;
@@ -306,7 +314,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 		const struct imx_sdhci_esdhc_imx_data *data,
 		const struct esdhc_platform_data *pdata);
 
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
 struct imx_spi_imx_data {
 	const char *devid;
 	int id;
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
deleted file mode 100644
index 1b9080385b46..000000000000
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#include <linux/scatterlist.h>
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-/*
- * This enumerates peripheral types. Used for SDMA.
- */
-enum sdma_peripheral_type {
-	IMX_DMATYPE_SSI,	/* MCU domain SSI */
-	IMX_DMATYPE_SSI_SP,	/* Shared SSI */
-	IMX_DMATYPE_MMC,	/* MMC */
-	IMX_DMATYPE_SDHC,	/* SDHC */
-	IMX_DMATYPE_UART,	/* MCU domain UART */
-	IMX_DMATYPE_UART_SP,	/* Shared UART */
-	IMX_DMATYPE_FIRI,	/* FIRI */
-	IMX_DMATYPE_CSPI,	/* MCU domain CSPI */
-	IMX_DMATYPE_CSPI_SP,	/* Shared CSPI */
-	IMX_DMATYPE_SIM,	/* SIM */
-	IMX_DMATYPE_ATA,	/* ATA */
-	IMX_DMATYPE_CCM,	/* CCM */
-	IMX_DMATYPE_EXT,	/* External peripheral */
-	IMX_DMATYPE_MSHC,	/* Memory Stick Host Controller */
-	IMX_DMATYPE_MSHC_SP,	/* Shared Memory Stick Host Controller */
-	IMX_DMATYPE_DSP,	/* DSP */
-	IMX_DMATYPE_MEMORY,	/* Memory */
-	IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
-	IMX_DMATYPE_SPDIF,	/* SPDIF */
-	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
-	IMX_DMATYPE_ASRC,	/* ASRC */
-	IMX_DMATYPE_ESAI,	/* ESAI */
-};
-
-enum imx_dma_prio {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-};
-
-struct imx_dma_data {
-	int dma_request; /* DMA request line */
-	enum sdma_peripheral_type peripheral_type;
-	int priority;
-};
-
-static inline int imx_dma_is_ipu(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ipu-core");
-}
-
-static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
-{
-	return strstr(dev_name(chan->device->dev), "sdma") ||
-		!strcmp(dev_name(chan->device->dev), "imx-dma");
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
deleted file mode 100644
index aaf97481f413..000000000000
--- a/arch/arm/plat-mxc/include/mach/esdhc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-enum wp_types {
-	ESDHC_WP_NONE,		/* no WP, neither controller nor gpio */
-	ESDHC_WP_CONTROLLER,	/* mmc controller internal WP */
-	ESDHC_WP_GPIO,		/* external gpio pin for WP */
-};
-
-enum cd_types {
-	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
-	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
-	ESDHC_CD_GPIO,		/* external gpio pin for CD */
-	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_gpio:	gpio for write_protect
- * @cd_gpio:	gpio for card_detect interrupt
- * @wp_type:	type of write_protect method (see wp_types enum above)
- * @cd_type:	type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
-	unsigned int wp_gpio;
-	unsigned int cd_gpio;
-	enum wp_types wp_type;
-	enum cd_types cd_type;
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
deleted file mode 100644
index 8289d915e615..000000000000
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * i2c.h - i.MX I2C driver header file
- *
- * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __ASM_ARCH_I2C_H_
-#define __ASM_ARCH_I2C_H_
-
-/**
- * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @bitrate:	Bus speed measured in Hz
- *
- **/
-struct imxi2c_platform_data {
-	u32 bitrate;
-};
-
-#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
deleted file mode 100644
index 4adec9b154dd..000000000000
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA        (1<<1)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-	void (*irda_enable)(int enable);
-	unsigned int irda_inv_rx:1;
-	unsigned int irda_inv_tx:1;
-	unsigned short transceiver_delay;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
deleted file mode 100644
index 9de8f062ad5d..000000000000
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This structure describes the machine which we are running on.
- */
-#ifndef __MACH_IMXFB_H__
-#define __MACH_IMXFB_H__
-
-#include <linux/fb.h>
-
-#define PCR_TFT		(1 << 31)
-#define PCR_COLOR	(1 << 30)
-#define PCR_PBSIZ_1	(0 << 28)
-#define PCR_PBSIZ_2	(1 << 28)
-#define PCR_PBSIZ_4	(2 << 28)
-#define PCR_PBSIZ_8	(3 << 28)
-#define PCR_BPIX_1	(0 << 25)
-#define PCR_BPIX_2	(1 << 25)
-#define PCR_BPIX_4	(2 << 25)
-#define PCR_BPIX_8	(3 << 25)
-#define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(5 << 25)
-#define PCR_BPIX_18	(6 << 25)
-#define PCR_PIXPOL	(1 << 24)
-#define PCR_FLMPOL	(1 << 23)
-#define PCR_LPPOL	(1 << 22)
-#define PCR_CLKPOL	(1 << 21)
-#define PCR_OEPOL	(1 << 20)
-#define PCR_SCLKIDLE	(1 << 19)
-#define PCR_END_SEL	(1 << 18)
-#define PCR_END_BYTE_SWAP (1 << 17)
-#define PCR_REV_VS	(1 << 16)
-#define PCR_ACD_SEL	(1 << 15)
-#define PCR_ACD(x)	(((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL	(1 << 7)
-#define PCR_SHARP	(1 << 6)
-#define PCR_PCD(x)	((x) & 0x3f)
-
-#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
-#define PWMR_LDMSK	(1 << 15)
-#define PWMR_SCR1	(1 << 10)
-#define PWMR_SCR0	(1 << 9)
-#define PWMR_CC_EN	(1 << 8)
-#define PWMR_PW(x)	((x) & 0xff)
-
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define DMACR_BURST	(1 << 31)
-#define DMACR_HM(x)	(((x) & 0xf) << 16)
-#define DMACR_TM(x)	((x) & 0xf)
-
-struct imx_fb_videomode {
-	struct fb_videomode mode;
-	u32 pcr;
-	unsigned char	bpp;
-};
-
-struct imx_fb_platform_data {
-	struct imx_fb_videomode *mode;
-	int		num_modes;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		pwmr;
-	u_int		lscr1;
-	u_int		dmacr;
-
-	u_char * fixed_screen_cpu;
-	dma_addr_t fixed_screen_dma;
-
-	int (*init)(struct platform_device *);
-	void (*exit)(struct platform_device *);
-
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
-};
-
-void set_imx_fb_info(struct imx_fb_platform_data *);
-#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index d8b65b51f2a9..f79f78a1c0ed 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -512,12 +512,16 @@ enum iomux_pins {
 #define MX31_PIN_CSPI3_SPI_RDY__CTS3	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__SFS		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__SCK		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__STXDA		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_DCD_DCE1__DCD_DCE1	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RI_DCE1__RI_DCE1	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DSR_DCE1__DSR_DCE1	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DTR_DCE1__DTR_DCE1	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__SRXDA	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
@@ -721,6 +725,7 @@ enum iomux_pins {
 #define MX31_PIN_KEY_ROW2_KEY_ROW2	IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW3_KEY_ROW3	IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW4_KEY_ROW4	IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW4_GPIO		IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_KEY_ROW5_KEY_ROW5	IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW6_KEY_ROW6	IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_ROW7_KEY_ROW7	IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
deleted file mode 100644
index 9761e003bde2..000000000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc..
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX53_H__
-#define __MACH_IOMUX_MX53_H__
-
-#include <mach/iomux-v3.h>
-
-/* These 2 defines are for pins that may not have a mux register, but could
- * have a pad setting register, and vice-versa. */
-#define __NA_	0x00
-
-#define MX53_UART_PAD_CTRL		(PAD_CTL_PKE | PAD_CTL_PUE |	\
-		PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define MX53_SDHC_PAD_CTRL 	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-				PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_SRE_FAST)
-
-
-#define MX53_PAD_GPIO_19__KPP_COL_5			IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__GPIO4_5			IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__CCM_CLKO			IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SPDIF_OUT1			IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2		IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__ECSPI1_RDY			IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__FEC_TDATA_3			IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT			IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__KPP_COL_0			IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO4_6			IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC		IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX		IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK			IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3			IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST		IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0			IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO4_7			IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX		IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI			IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER			IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__KPP_COL_1			IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO4_8			IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX		IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO			IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK			IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY		IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1			IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO4_9			IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX		IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0			IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__FEC_COL			IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID		IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__KPP_COL_2			IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO4_10			IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN			IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_MDIO			IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1			IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2			IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE		IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2			IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO4_11			IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN			IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_MDC			IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2			IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2			IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR		IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__KPP_COL_3			IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO4_12			IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP			IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__SPDIF_IN1			IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__I2C2_SCL			IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3			IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__FEC_CRS			IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK		IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3			IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO4_13			IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM			IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK		IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__I2C2_SDA			IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT		IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP			IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0		IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__KPP_COL_4			IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO4_14			IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN			IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__IPU_SISG_4			IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__UART5_RTS			IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC		IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1		IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4			IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO4_15			IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN			IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5			IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__UART5_CTS			IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID		IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16			IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR		IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0	IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0		IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID		IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO4_17			IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC		IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1	IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1		IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID		IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO4_18			IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD		IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2	IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2		IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION		IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO4_19			IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS		IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3	IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3		IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG		IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4			IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO4_20			IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD		IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP			IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD		IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4		IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT	IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO4_21			IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK			IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0	IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN	IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5		IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY		IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO4_22			IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI			IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1	IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	\
-							IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6		IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID		IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO4_23			IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO			IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2	IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE		IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7		IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE		IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO4_24			IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0			IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3	IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR	IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8		IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR		IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO4_25			IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1			IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4	IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB		IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9		IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK		IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO4_26			IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2			IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5	IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS	IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10		IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0	IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO4_27			IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3			IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6	IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE	IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11		IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1	IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO4_28			IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY			IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7	IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0	IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12		IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID		IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO4_29			IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO			IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B		IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1	IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13		IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID		IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO4_30			IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO			IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B		IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2	IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14		IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0		IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO4_31			IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP		IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	\
-							IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15		IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1		IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO5_5			IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT		IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	\
-							IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16		IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2		IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO5_6			IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK		IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	\
-							IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17		IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3		IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO5_7			IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS		IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	\
-							IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18		IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4		IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO5_8			IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC		IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	\
-							IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19		IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5		IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO5_9			IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1		IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1		IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	\
-							IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20		IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6		IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO5_10			IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI		IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC		IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0		IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	\
-							IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21		IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7		IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO5_11			IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO		IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD		IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1		IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	\
-							IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22		IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO5_12			IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0		IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS		IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS		IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	\
-							IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23		IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2		IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO5_13			IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK		IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD		IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC		IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	\
-							IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24		IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3		IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO5_14			IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK		IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC		IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	\
-							IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25		IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI		IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO5_15			IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI		IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD		IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0	IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26		IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO		IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO5_16			IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO		IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS		IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1	IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27		IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK		IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO5_17			IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0		IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD		IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2	IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28		IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS		IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK		IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18			IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0		IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29		IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC		IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO5_19			IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK		IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1		IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30		IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL			IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN		IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20			IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2		IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31		IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK		IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC		IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21			IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3		IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32		IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0		IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4		IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__GPIO5_22			IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5			IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK			IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP		IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC		IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33		IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1		IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5		IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__GPIO5_23			IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5			IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI			IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT		IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD		IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34		IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2		IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6		IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__GPIO5_24			IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6			IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO			IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK		IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS		IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35		IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3		IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7		IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__GPIO5_25			IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6			IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0			IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR		IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD		IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36		IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4		IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8		IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__GPIO5_26			IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7			IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK			IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC		IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA			IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37		IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5		IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9		IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__GPIO5_27			IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7			IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI			IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR		IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL			IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38		IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6		IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10		IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__GPIO5_28			IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX		IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO		IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC		IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4		IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39		IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7		IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11		IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__GPIO5_29			IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX		IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0			IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS		IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5		IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40		IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__GPIO5_30			IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX		IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0	IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41		IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9		IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13		IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__GPIO5_31			IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX		IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1	IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42		IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__GPIO6_0			IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX		IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2	IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43		IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11		IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15		IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__GPIO6_1			IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX		IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3	IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44		IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12		IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16		IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__GPIO6_2			IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__UART4_RTS			IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4	IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45		IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__GPIO6_3			IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__UART4_CTS			IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5	IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46		IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14		IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18		IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__GPIO6_4			IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__UART5_RTS			IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6	IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47		IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__GPIO6_5			IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__UART5_CTS			IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7	IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48		IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK		IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25			IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO5_2			IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__ECSPI2_RDY			IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12			IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__CSPI_SS1			IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS			IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK		IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2			IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO2_30			IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK		IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS		IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0			IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__I2C2_SCL			IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16			IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO3_16			IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5			IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK		IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK			IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__I2C2_SDA			IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17			IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO3_17			IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6			IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN		IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__ECSPI1_MISO			IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__I2C3_SCL			IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18			IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO3_18			IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7			IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO		IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI			IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__I2C3_SDA			IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS			IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19			IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO3_19			IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8			IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS		IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__ECSPI1_SS1			IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EPIT1_EPITO			IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__UART1_CTS			IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC		IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20			IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO3_20			IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16			IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS		IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__CSPI_SS0			IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EPIT2_EPITO			IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__UART1_RTS			IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR		IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21			IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO3_21			IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17			IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK		IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__CSPI_SCLK			IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__I2C1_SCL			IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC		IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22			IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO3_22			IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1			IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN		IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__CSPI_MISO			IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR		IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23			IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO3_23			IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART3_CTS			IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART1_DCD			IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS			IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2			IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN		IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14			IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3			IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO2_31			IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART3_RTS			IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART1_RI			IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3			IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC		IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16			IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24			IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO3_24			IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX			IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI1_SS2			IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__CSPI_SS2			IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS		IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI2_SS2			IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART1_DTR			IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25			IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO3_25			IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX			IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI1_SS3			IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__CSPI_SS3			IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC		IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI2_SS3			IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART1_DSR			IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26			IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO3_26			IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX			IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D26__FIRI_RXD			IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1			IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11			IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_SISG_2			IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22		IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27			IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO3_27			IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX			IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D27__FIRI_TXD			IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0			IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13			IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_SISG_3			IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28			IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO3_28			IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG			IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13			IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29			IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO3_29			IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__UART2_RTS			IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS		IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__CSPI_SS0			IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15			IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC		IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14			IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30			IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO3_30			IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__UART3_CTS			IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3			IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11			IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC		IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC		IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31			IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO3_31			IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__UART3_RTS			IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2			IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12			IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20		IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR		IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR		IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24			IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO5_4			IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19		IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19			IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_SISG_2			IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID		IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23			IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO6_6			IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18		IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18			IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_SISG_3			IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION		IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22			IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO2_16			IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17		IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17			IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7			IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21			IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO2_17			IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16		IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16			IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6			IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20			IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO2_18			IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15		IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15			IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5			IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19			IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO2_19			IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14		IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14			IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4			IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18			IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO2_20			IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13		IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13			IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3			IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17			IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO2_21			IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12		IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12			IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2			IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16			IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO2_22			IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK		IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK		IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1			IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0			IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO2_23			IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK			IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5			IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1			IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO2_24			IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI			IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6			IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE			IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO2_25			IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__ECSPI2_MISO			IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7			IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG			IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW			IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO2_26			IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__ECSPI2_SS0			IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8			IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT		IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA			IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO2_27			IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1			IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17			IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0			IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0			IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO2_28			IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11		IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11			IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY			IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7			IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1			IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO2_29			IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10		IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10			IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6			IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0		IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO3_0			IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9		IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9			IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5			IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1		IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO3_1			IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8		IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8			IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4			IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2		IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO3_2			IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7		IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7			IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3			IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3		IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO3_3			IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6		IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6			IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2			IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4		IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO3_4			IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5		IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5			IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7			IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5		IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO3_5			IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4		IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4			IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6			IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6		IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO3_6			IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3		IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3			IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5			IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7		IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO3_7			IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2		IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2			IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4			IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8		IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO3_8			IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1		IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1			IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3			IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9		IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO3_9			IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0		IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0			IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2			IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10		IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO3_10			IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15		IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN		IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1		IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11		IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO3_11			IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2			IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC		IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12		IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO3_12			IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3			IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC		IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13		IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO3_13			IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS		IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK		IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14		IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO3_14			IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS		IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK		IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15		IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO3_15			IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1			IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4			IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B		IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO6_12			IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B		IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO6_13			IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT		IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO5_0			IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B		IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22			IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3		IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24			IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2		IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26			IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK		IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28			IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1		IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30			IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0		IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22			IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3		IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24			IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK		IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26			IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2		IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28			IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1		IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30			IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0		IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO4_0			IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT		IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO4_1			IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO4_2			IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO4_3			IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO4_4			IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE		IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO6_7			IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0		IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE		IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO6_8			IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1		IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B		IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO6_9			IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2		IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0		IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO6_10			IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3		IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0		IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO6_11			IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4		IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1		IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO6_14			IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK			IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5		IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2		IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO6_15			IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0			IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0			IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE		IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK		IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG			IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6		IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3		IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO6_16			IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1			IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1			IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26		IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT			IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7		IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_MDIO			IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO1_22			IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR			IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_COL			IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2		IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3	IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49		IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK		IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23			IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR			IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4	IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50		IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER			IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO1_24			IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR			IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK			IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3		IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV			IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25			IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT			IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1			IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO1_26			IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__ESAI1_FST			IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG			IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1		IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0			IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO1_27			IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT			IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT		IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN			IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO1_28			IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2		IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1			IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO1_29			IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3		IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK			IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK		IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0			IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO1_30			IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1		IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0		IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__FEC_MDC			IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO1_31			IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0			IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT			IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG	IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1		IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__PATA_DIOW			IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__GPIO6_17			IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX		IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2		IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__PATA_DMACK			IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__GPIO6_18			IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX		IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3		IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ			IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__GPIO7_0			IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX		IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0		IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4		IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN		IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1		IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX		IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1		IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5	IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ			IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__GPIO7_2			IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__UART2_CTS			IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN			IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2		IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6		IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__PATA_DIOR			IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__GPIO7_3			IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__UART2_RTS			IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN			IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7		IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B	IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__GPIO7_4			IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD		IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__UART1_CTS		IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN		IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0	IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__PATA_IORDY			IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__GPIO7_5			IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK			IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__UART1_RTS			IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN			IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1		IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__PATA_DA_0			IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__GPIO7_6			IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST			IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE			IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2		IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__PATA_DA_1			IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__GPIO7_7			IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD			IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__UART3_CTS			IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3		IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__PATA_DA_2			IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__GPIO7_8			IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK			IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__UART3_RTS			IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4		IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__PATA_CS_0			IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__GPIO7_9			IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX		IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5		IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__PATA_CS_1			IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__GPIO7_10			IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX		IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6		IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0		IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPIO2_0			IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0		IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4		IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0	IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0		IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7		IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1		IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPIO2_1			IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1		IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5		IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1	IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1		IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2		IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPIO2_2			IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2		IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6		IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2	IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2		IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3		IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPIO2_3			IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3		IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7		IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3	IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3		IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4		IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPIO2_4			IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4		IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4		IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4	IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4		IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5		IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPIO2_5			IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5		IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5		IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5	IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5		IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6		IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPIO2_6			IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6		IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6		IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6	IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6		IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7		IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPIO2_7			IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7		IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7		IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7	IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7		IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8		IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPIO2_8			IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4		IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8		IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0		IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8	IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8		IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9		IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPIO2_9			IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5		IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9		IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1		IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9	IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9		IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10		IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPIO2_10			IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6		IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10		IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2		IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10	IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10		IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11		IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPIO2_11			IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7		IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11		IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3		IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11	IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11		IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12		IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPIO2_12			IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4		IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12		IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0		IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12	IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12		IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13		IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPIO2_13			IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5		IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13		IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1		IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13	IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13		IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14		IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPIO2_14			IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6		IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14		IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2		IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14	IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14		IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15		IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPIO2_15			IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7		IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15		IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3		IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15	IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15		IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0			IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO1_16			IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1			IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CSPI_MISO			IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP		IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1			IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO1_17			IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2			IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CSPI_SS0			IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP		IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD			IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO1_18			IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1			IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CSPI_MOSI			IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP			IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2			IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO1_19			IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2			IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO			IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B		IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CSPI_SS1			IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB	IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP		IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK			IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO1_20			IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT		IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPT_CLKIN			IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__CSPI_SCLK			IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0		IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3			IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO1_21			IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3			IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO			IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B		IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__CSPI_SS2			IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB	IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1		IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK			IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO1_10			IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__KPP_COL_5			IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS		IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__CSPI_SCLK			IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V			IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD			IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO1_11			IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__KPP_ROW_5			IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC		IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__CSPI_MOSI			IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__SCC_RANDOM			IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3			IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO1_12			IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__KPP_COL_6			IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC		IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__CSPI_SS2			IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__SJC_DONE			IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2			IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO1_13			IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6			IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD		IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__CSPI_SS1			IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__SJC_FAIL			IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1			IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO1_14			IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__KPP_COL_7			IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS		IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__CSPI_SS0			IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO		IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0			IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO1_15			IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7			IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD		IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__CSPI_MISO			IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT		IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_CLKO			IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO1_0			IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__KPP_COL_5			IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK		IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__EPIT1_EPITO			IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB			IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR		IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CSU_TD				IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESAI1_SCKR			IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO1_1			IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__KPP_ROW_5			IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK		IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__PWM2_PWMO			IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B			IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESDHC1_CD			IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK			IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESAI1_FSR			IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO1_9			IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__KPP_COL_6			IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B			IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__PWM1_PWMO			IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B			IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESDHC1_WP			IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE			IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__ESAI1_HCKR			IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO1_3			IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__I2C3_SCL			IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN			IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__CCM_CLKO2			IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0	IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC		IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__MLB_MLBCLK			IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESAI1_SCKT			IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO1_6			IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__I2C3_SDA			IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0			IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB		IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1	IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL			IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__MLB_MLBSIG			IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESAI1_FST			IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO1_2			IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__KPP_ROW_6			IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1			IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0		IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2	IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESDHC2_WP			IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__MLB_MLBDAT			IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESAI1_HCKT			IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO1_4			IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__KPP_COL_7			IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2			IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1		IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3	IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESDHC2_CD			IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE			IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3			IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO1_5			IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__KPP_ROW_7			IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_CLKO			IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2		IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4	IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__I2C3_SCL			IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP			IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1			IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO1_7			IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__EPIT1_EPITO			IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CAN1_TXCAN			IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX			IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_7__FIRI_RXD			IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK			IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP			IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0			IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO1_8			IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__EPIT2_EPITO			IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX			IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_8__FIRI_TXD			IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK			IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP			IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2			IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO7_11			IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT		IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1		IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SPDIF_IN1			IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__I2C3_SDA			IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SJC_DE_B			IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__ESAI1_TX0			IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO7_12			IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0		IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY			IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG		IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SPDIF_OUT1			IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__IPU_SNOOP2			IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT			IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESAI1_TX1			IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO7_13			IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1		IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__OWIRE_LINE			IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG	IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK		IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL			IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST		IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
-
-#endif	/* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
deleted file mode 100644
index 29115f405af9..000000000000
--- a/arch/arm/plat-mxc/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-/* board specific SDHC data, optional.
- * If not present, a writable card with 3,3V is assumed.
- */
-struct imxmmc_platform_data {
-	/* Return values for the get_ro callback should be:
-	 *   0 for a read/write card
-	 *   1 for a read-only card
-	 *   -ENOSYS when not supported (equal to NULL callback)
-	 *   or a negative errno value when something bad happened
-	 */
-	int (*get_ro)(struct device *);
-
-	/* board specific hook to (de)initialize the SD slot.
-	 * The board code can call 'handler' on a card detection
-	 * change giving data as argument.
-	 */
-	int (*init)(struct device *dev, irq_handler_t handler, void *data);
-	void (*exit)(struct device *dev, void *data);
-
-	/* available voltages. If not given, assume
-	 * MMC_VDD_32_33 | MMC_VDD_33_34
-	 */
-	unsigned int ocr_avail;
-
-	/* adjust slot voltage */
-	void (*setpower)(struct device *, unsigned int vdd);
-
-	/* enable card detect using DAT3 */
-	int dat3_card_detect;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1_camera.h b/arch/arm/plat-mxc/include/mach/mx1_camera.h
deleted file mode 100644
index 4fd6c70314b4..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx1_camera.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH	1
-#define MX1_CAMERA_PCLK_RISING	2
-#define MX1_CAMERA_VSYNC_HIGH	4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @flags:	MX1 camera platform flags
- */
-struct mx1_camera_pdata {
-	unsigned long mclk_10khz;
-	unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
deleted file mode 100644
index 22d0b596262c..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MX21_USBH
-#define __ASM_ARCH_MX21_USBH
-
-enum mx21_usbh_xcvr {
-	/* Values below as used by hardware (HWMODE register) */
-	MX21_USBXCVR_TXDIF_RXDIF = 0,
-	MX21_USBXCVR_TXDIF_RXSE = 1,
-	MX21_USBXCVR_TXSE_RXDIF = 2,
-	MX21_USBXCVR_TXSE_RXSE = 3,
-};
-
-struct mx21_usbh_platform_data {
-	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
-	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
-	u16 	enable_host1:1,
-		enable_host2:1,
-		enable_otg_host:1, /* enable "OTG" port (as host) */
-		host1_xcverless:1, /* traceiverless host1 port */
-		host1_txenoe:1, /* output enable host1 transmit enable */
-		otg_ext_xcvr:1, /* external tranceiver for OTG port */
-		unused:10;
-};
-
-#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 627d94f1b010..ec466400a200 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -98,6 +98,7 @@
 #define MX25_INT_UART1		(NR_IRQS_LEGACY + 45)
 #define MX25_INT_GPIO2		(NR_IRQS_LEGACY + 51)
 #define MX25_INT_GPIO1		(NR_IRQS_LEGACY + 52)
+#define MX25_INT_GPT1		(NR_IRQS_LEGACY + 54)
 #define MX25_INT_FEC		(NR_IRQS_LEGACY + 57)
 
 #define MX25_DMA_REQ_SSI2_RX1	22
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
deleted file mode 100644
index 3c080a32dbf5..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * mx2-cam.h - i.MX27/i.MX25 camera driver header file
- *
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX2_CAM_H_
-#define __MACH_MX2_CAM_H_
-
-#define MX2_CAMERA_SWAP16		(1 << 0)
-#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
-#define MX2_CAMERA_CCIR			(1 << 2)
-#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
-#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
-#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
-#define MX2_CAMERA_INV_DATA		(1 << 6)
-#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
-
-/**
- * struct mx2_camera_platform_data - optional platform data for mx2_camera
- * @flags: any combination of MX2_CAMERA_*
- * @clk: clock rate of the csi block / 2
- */
-struct mx2_camera_platform_data {
-	unsigned long flags;
-	unsigned long clk;
-};
-
-#endif /* __MACH_MX2_CAM_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index dbced61d9fda..ee9b1f9215df 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -76,7 +76,7 @@
 #define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
 
 #define MX31_ROMP_BASE_ADDR		0x60000000
-#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX31_ROMP_BASE_ADDR_VIRT	IOMEM(0xfc500000)
 #define MX31_ROMP_SIZE			SZ_1M
 
 #define MX31_AVIC_BASE_ADDR		0x68000000
@@ -92,11 +92,11 @@
 #define MX31_CS3_BASE_ADDR		0xb2000000
 
 #define MX31_CS4_BASE_ADDR		0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS4_BASE_ADDR_VIRT		IOMEM(0xf6000000)
 #define MX31_CS4_SIZE			SZ_32M
 
 #define MX31_CS5_BASE_ADDR		0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT		0xf8000000
+#define MX31_CS5_BASE_ADDR_VIRT		IOMEM(0xf8000000)
 #define MX31_CS5_SIZE			SZ_32M
 
 #define MX31_X_MEMC_BASE_ADDR		0xb8000000
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
deleted file mode 100644
index f226ee3777e1..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * mx3_camera.h - i.MX3x camera driver header file
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MX3_CAMERA_H_
-#define _MX3_CAMERA_H_
-
-#include <linux/device.h>
-
-#define MX3_CAMERA_CLK_SRC	1
-#define MX3_CAMERA_EXT_VSYNC	2
-#define MX3_CAMERA_DP		4
-#define MX3_CAMERA_PCP		8
-#define MX3_CAMERA_HSP		0x10
-#define MX3_CAMERA_VSP		0x20
-#define MX3_CAMERA_DATAWIDTH_4	0x40
-#define MX3_CAMERA_DATAWIDTH_8	0x80
-#define MX3_CAMERA_DATAWIDTH_10	0x100
-#define MX3_CAMERA_DATAWIDTH_15	0x200
-
-#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
-				   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
-
-/**
- * struct mx3_camera_pdata - i.MX3x camera platform data
- * @flags:	MX3_CAMERA_* flags
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @dma_dev:	IPU DMA device to match against in channel allocation
- */
-struct mx3_camera_pdata {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-	struct device *dma_dev;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
deleted file mode 100644
index fdbe60001542..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH	0x80000000
-#define FB_SYNC_CLK_INVERT	0x40000000
-#define FB_SYNC_DATA_INVERT	0x20000000
-#define FB_SYNC_CLK_IDLE_EN	0x10000000
-#define FB_SYNC_SHARP_MODE	0x08000000
-#define FB_SYNC_SWAP_RGB	0x04000000
-#define FB_SYNC_CLK_SEL_EN	0x02000000
-
-/*
- * Specify the way your display is connected. The IPU can arbitrarily
- * map the internal colors to the external data lines. We only support
- * the following mappings at the moment.
- */
-enum disp_data_mapping {
-	/* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
-	IPU_DISP_DATA_MAPPING_RGB666,
-	/* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
-	IPU_DISP_DATA_MAPPING_RGB565,
-	/* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
-	IPU_DISP_DATA_MAPPING_RGB888,
-};
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev:	pointer to the dma-device, used for dma-slave connection
- * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
-	struct device			*dma_dev;
-	const char			*name;
-	const struct fb_videomode	*mode;
-	int				num_modes;
-	enum disp_data_mapping		disp_data_fmt;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
deleted file mode 100644
index 7eb9d1329671..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
-#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
-#define MXC_EHCI_FORCE_FS		(1 << 24)
-#define MXC_EHCI_UTMI_8BIT		(0 << 28)
-#define MXC_EHCI_UTMI_16BIT		(1 << 28)
-#define MXC_EHCI_SERIAL			(1 << 29)
-#define MXC_EHCI_MODE_UTMI		(0 << 30)
-#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
-#define MXC_EHCI_MODE_ULPI		(2 << 30)
-#define MXC_EHCI_MODE_SERIAL		(3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
-#define MXC_EHCI_INTERFACE_MASK		(0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
-#define MXC_EHCI_TTL_ENABLED		(1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
-#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
-#define MXC_EHCI_IPPUE_UP		(1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
-
-#define MXC_USBCTRL_OFFSET		0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
-#define MXC_USBH2CTRL_OFFSET		0x14
-
-#define MX5_USBOTHER_REGS_OFFSET	0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
-
-struct mxc_usbh_platform_data {
-	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
-
-	unsigned int		 portsc;
-	struct usb_phy		*otg;
-};
-
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
deleted file mode 100644
index 6bb96ef1600b..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-#include <linux/mtd/partitions.h>
-
-struct mxc_nand_platform_data {
-	unsigned int width;	/* data bus width in bytes */
-	unsigned int hw_ecc:1;	/* 0 if suppress hardware ECC */
-	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
-	struct mtd_partition *parts;	/* partition table */
-	int nr_parts;			/* size of parts */
-};
-#endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
deleted file mode 100644
index 3a3942823c20..000000000000
--- a/arch/arm/plat-mxc/include/mach/sdma.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __MACH_MXC_SDMA_H__
-#define __MACH_MXC_SDMA_H__
-
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
-	s32 ap_2_ap_addr;
-	s32 ap_2_bp_addr;
-	s32 ap_2_ap_fixed_addr;
-	s32 bp_2_ap_addr;
-	s32 loopback_on_dsp_side_addr;
-	s32 mcu_interrupt_only_addr;
-	s32 firi_2_per_addr;
-	s32 firi_2_mcu_addr;
-	s32 per_2_firi_addr;
-	s32 mcu_2_firi_addr;
-	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
-	s32 per_2_app_addr;
-	s32 mcu_2_app_addr;
-	s32 per_2_per_addr;
-	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
-	s32 per_2_shp_addr;
-	s32 mcu_2_shp_addr;
-	s32 ata_2_mcu_addr;
-	s32 mcu_2_ata_addr;
-	s32 app_2_per_addr;
-	s32 app_2_mcu_addr;
-	s32 shp_2_per_addr;
-	s32 shp_2_mcu_addr;
-	s32 mshc_2_mcu_addr;
-	s32 mcu_2_mshc_addr;
-	s32 spdif_2_mcu_addr;
-	s32 mcu_2_spdif_addr;
-	s32 asrc_2_mcu_addr;
-	s32 ext_mem_2_ipu_addr;
-	s32 descrambler_addr;
-	s32 dptc_dvfs_addr;
-	s32 utra_addr;
-	s32 ram_code_start_addr;
-};
-
-/**
- * struct sdma_platform_data - platform specific data for SDMA engine
- *
- * @fw_name		The firmware name
- * @script_addrs	SDMA scripts addresses in SDMA ROM
- */
-struct sdma_platform_data {
-	char *fw_name;
-	struct sdma_script_start_addrs *script_addrs;
-};
-
-#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h
deleted file mode 100644
index 08be445e8eb8..000000000000
--- a/arch/arm/plat-mxc/include/mach/spi.h
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#ifndef __MACH_SPI_H_
-#define __MACH_SPI_H_
-
-/*
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- *              pins, numbers < 0 mean internal CSPI chipselects according
- *              to MXC_SPI_CS(). Normally you want to use gpio based chip
- *              selects as the CSPI module tries to be intelligent about
- *              when to assert the chipselect: The CSPI module deasserts the
- *              chipselect once it runs out of input data. The other problem
- *              is that it is not possible to mix between high active and low
- *              active chipselects on one single bus using the internal
- *              chipselects. Unfortunately Freescale decided to put some
- *              chipselects on dedicated pins which are not usable as gpios,
- *              so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
- */
-struct spi_imx_master {
-	int	*chipselect;
-	int	num_chipselect;
-};
-
-#define MXC_SPI_CS(no)	((no) - 32)
-
-#endif /* __MACH_SPI_H_*/
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
deleted file mode 100644
index 63f3c2804239..000000000000
--- a/arch/arm/plat-mxc/include/mach/ssi.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MACH_SSI_H
-#define __MACH_SSI_H
-
-struct snd_ac97;
-
-extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
-extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
-
-struct imx_ssi_platform_data {
-	unsigned int flags;
-#define IMX_SSI_DMA            (1 << 0)
-#define IMX_SSI_USE_AC97       (1 << 1)
-#define IMX_SSI_NET            (1 << 2)
-#define IMX_SSI_SYN            (1 << 3)
-#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
-	void (*ac97_reset) (struct snd_ac97 *ac97);
-	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
-};
-
-#endif /* __MACH_SSI_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
deleted file mode 100644
index be273371f34a..000000000000
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *	Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/plat-mxc/ssi-fiq-ksym.c
index b5fad454da78..792090f9a032 100644
--- a/arch/arm/plat-mxc/ssi-fiq-ksym.c
+++ b/arch/arm/plat-mxc/ssi-fiq-ksym.c
@@ -10,7 +10,7 @@
 
 #include <linux/module.h>
 
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 
 EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
 EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
index 8397a2dd19f2..a8b93c5f29b5 100644
--- a/arch/arm/plat-mxc/ssi-fiq.S
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -34,91 +34,98 @@
 		.global imx_ssi_fiq_rx_buffer
 		.global imx_ssi_fiq_tx_buffer
 
+/*
+ * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol
+ * using ENDPROC().  imx_ssi_fiq_start and imx_ssi_fiq_end are used to
+ * mark the function body so that it can be copied to the FIQ vector in
+ * the vectors page.  imx_ssi_fiq_start should only be called as the result
+ * of an FIQ: calling it directly will not work.
+ */
 imx_ssi_fiq_start:
-		ldr r12, imx_ssi_fiq_base
+		ldr r12, .L_imx_ssi_fiq_base
 
 		/* TX */
-		ldr r11, imx_ssi_fiq_tx_buffer
+		ldr r13, .L_imx_ssi_fiq_tx_buffer
 
 		/* shall we send? */
-		ldr r13, [r12, #SSI_SIER]
-		tst r13, #SSI_SIER_TFE0_EN
+		ldr r11, [r12, #SSI_SIER]
+		tst r11, #SSI_SIER_TFE0_EN
 		beq 1f
 
 		/* TX FIFO empty? */
-		ldr r13, [r12, #SSI_SISR]
-		tst r13, #SSI_SISR_TFE0
+		ldr r11, [r12, #SSI_SISR]
+		tst r11, #SSI_SISR_TFE0
 		beq 1f
 
 		mov r10, #0x10000
 		sub r10, #1
 		and r10, r10, r8	/* r10: current buffer offset */
 
-		add r11, r11, r10
+		add r13, r13, r10
 
-		ldrh r13, [r11]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13]
+		strh r11, [r12, #SSI_STX0]
 
-		ldrh r13, [r11, #2]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13, #2]
+		strh r11, [r12, #SSI_STX0]
 
-		ldrh r13, [r11, #4]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13, #4]
+		strh r11, [r12, #SSI_STX0]
 
-		ldrh r13, [r11, #6]
-		strh r13, [r12, #SSI_STX0]
+		ldrh r11, [r13, #6]
+		strh r11, [r12, #SSI_STX0]
 
 		add r10, #8
-		lsr r13, r8, #16	/* r13: buffer size */
-		cmp r10, r13
-		lslgt r8, r13, #16
+		lsr r11, r8, #16	/* r11: buffer size */
+		cmp r10, r11
+		lslgt r8, r11, #16
 		addle r8, #8
 1:
 		/* RX */
 
 		/* shall we receive? */
-		ldr r13, [r12, #SSI_SIER]
-		tst r13, #SSI_SIER_RFF0_EN
+		ldr r11, [r12, #SSI_SIER]
+		tst r11, #SSI_SIER_RFF0_EN
 		beq 1f
 
 		/* RX FIFO full? */
-		ldr r13, [r12, #SSI_SISR]
-		tst r13, #SSI_SISR_RFF0
+		ldr r11, [r12, #SSI_SISR]
+		tst r11, #SSI_SISR_RFF0
 		beq 1f
 
-		ldr r11, imx_ssi_fiq_rx_buffer
+		ldr r13, .L_imx_ssi_fiq_rx_buffer
 
 		mov r10, #0x10000
 		sub r10, #1
 		and r10, r10, r9	/* r10: current buffer offset */
 
-		add r11, r11, r10
+		add r13, r13, r10
 
-		ldr r13, [r12, #SSI_SACNT]
-		tst r13, #SSI_SACNT_AC97EN
+		ldr r11, [r12, #SSI_SACNT]
+		tst r11, #SSI_SACNT_AC97EN
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13]
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #2]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13, #2]
 
 		/* dummy read to skip slot 12 */
-		ldrne r13, [r12, #SSI_SRX0]
+		ldrne r11, [r12, #SSI_SRX0]
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #4]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13, #4]
 
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #6]
+		ldr r11, [r12, #SSI_SRX0]
+		strh r11, [r13, #6]
 
 		/* dummy read to skip slot 12 */
-		ldrne r13, [r12, #SSI_SRX0]
+		ldrne r11, [r12, #SSI_SRX0]
 
 		add r10, #8
-		lsr r13, r9, #16	/* r13: buffer size */
-		cmp r10, r13
-		lslgt r9, r13, #16
+		lsr r11, r9, #16	/* r11: buffer size */
+		cmp r10, r11
+		lslgt r9, r11, #16
 		addle r9, #8
 
 1:
@@ -126,11 +133,15 @@ imx_ssi_fiq_start:
 		subs	pc, lr, #4
 
 		.align
+.L_imx_ssi_fiq_base:
 imx_ssi_fiq_base:
 		.word 0x0
+.L_imx_ssi_fiq_rx_buffer:
 imx_ssi_fiq_rx_buffer:
 		.word 0x0
+.L_imx_ssi_fiq_tx_buffer:
 imx_ssi_fiq_tx_buffer:
 		.word 0x0
+.L_imx_ssi_fiq_end:
 imx_ssi_fiq_end:
 
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 1996c3e3b8fe..3da78cfc5a94 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,7 +21,6 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -29,9 +28,6 @@
 #include <asm/proc-fns.h>
 #include <asm/mach-types.h>
 
-void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
-EXPORT_SYMBOL_GPL(imx_ioremap);
-
 static void __iomem *wdog_base;
 
 /*
diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/arch/arm/plat-nomadik/include/plat/ske.h
deleted file mode 100644
index 31382fbc07dc..000000000000
--- a/arch/arm/plat-nomadik/include/plat/ske.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
- *
- * ux500 Scroll key and Keypad Encoder (SKE) header
- */
-
-#ifndef __SKE_H
-#define __SKE_H
-
-#include <linux/input/matrix_keypad.h>
-
-/* register definitions for SKE peripheral */
-#define SKE_CR		0x00
-#define SKE_VAL0	0x04
-#define SKE_VAL1	0x08
-#define SKE_DBCR	0x0C
-#define SKE_IMSC	0x10
-#define SKE_RIS		0x14
-#define SKE_MIS		0x18
-#define SKE_ICR		0x1C
-
-/*
- * Keypad module
- */
-
-/**
- * struct keypad_platform_data - structure for platform specific data
- * @init:	pointer to keypad init function
- * @exit:	pointer to keypad deinitialisation function
- * @keymap_data: matrix scan code table for keycodes
- * @krow:	maximum number of rows
- * @kcol:	maximum number of columns
- * @debounce_ms: platform specific debounce time
- * @no_autorepeat: flag for auto repetition
- * @wakeup_enable: allow waking up the system
- */
-struct ske_keypad_platform_data {
-	int (*init)(void);
-	int (*exit)(void);
-	const struct matrix_keymap_data *keymap_data;
-	u8 krow;
-	u8 kcol;
-	u8 debounce_ms;
-	bool no_autorepeat;
-	bool wakeup_enable;
-};
-#endif	/*__SKE_KPD_H*/
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index dd36eba9506c..ca83a7659aef 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2PLUS
 	bool "TI OMAP2/3/4"
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
+	select SPARSE_IRQ
 	select OMAP_DM_TIMER
 	select USE_OF
 	select PROC_DEVICETREE if PROC_FS
@@ -41,9 +42,8 @@ config OMAP_DEBUG_DEVICES
 	  For debug cards on TI reference boards.
 
 config OMAP_DEBUG_LEDS
-	bool
+	def_bool y if NEW_LEDS
 	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS_CLASS
 
 config POWER_AVS_OMAP
 	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 961bf859bc0c..dacaee009a4e 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,8 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
-	 fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 706b7e29397f..9d7ac20ef8f9 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -312,33 +312,6 @@ void clk_enable_init_clocks(void)
 	}
 }
 
-/**
- * omap_clk_get_by_name - locate OMAP struct clk by its name
- * @name: name of the struct clk to locate
- *
- * Locate an OMAP struct clk by its name.  Assumes that struct clk
- * names are unique.  Returns NULL if not found or a pointer to the
- * struct clk if found.
- */
-struct clk *omap_clk_get_by_name(const char *name)
-{
-	struct clk *c;
-	struct clk *ret = NULL;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(c, &clocks, node) {
-		if (!strcmp(c->name, name)) {
-			ret = c;
-			break;
-		}
-	}
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
 int omap_clk_enable_autoidle_all(void)
 {
 	struct clk *c;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 89a3723b3538..111315a69354 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -17,52 +17,12 @@
 #include <linux/dma-mapping.h>
 
 #include <plat/common.h>
-#include <plat/board.h>
 #include <plat/vram.h>
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
 #include <plat/dma.h>
 
 #include <plat/omap-secure.h>
 
-
-#define NO_LENGTH_CHECK 0xffffffff
-
-struct omap_board_config_kernel *omap_board_config __initdata;
-int omap_board_config_size;
-
-static const void *__init get_config(u16 tag, size_t len,
-		int skip, size_t *len_out)
-{
-	struct omap_board_config_kernel *kinfo = NULL;
-	int i;
-
-	/* Try to find the config from the board-specific structures
-	 * in the kernel. */
-	for (i = 0; i < omap_board_config_size; i++) {
-		if (omap_board_config[i].tag == tag) {
-			if (skip == 0) {
-				kinfo = &omap_board_config[i];
-				break;
-			} else {
-				skip--;
-			}
-		}
-	}
-	if (kinfo == NULL)
-		return NULL;
-	return kinfo->data;
-}
-
-const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-{
-        return get_config(tag, len, nr, NULL);
-}
-
-const void *__init omap_get_var_config(u16 tag, size_t *len)
-{
-        return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
-
 void __init omap_reserve(void)
 {
 	omap_vram_reserve_sdram_memblock();
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index dbf1e03029a5..2e826f1faf7b 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,10 +22,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
-#include <plat/hardware.h>
 #include <plat/common.h>
-#include <plat/board.h>
-
 #include <plat/clock.h>
 
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index caa1f7b6cc21..c7a4c0902b38 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -17,9 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <plat/board.h>
-
-
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.
  */
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 39407cbe34c6..ea29bbe8e5cf 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,279 +1,119 @@
 /*
  * linux/arch/arm/plat-omap/debug-leds.c
  *
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
  * Copyright 2003 by Texas Instruments Incorporated
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/gpio.h>
+
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/slab.h>
 
 #include <mach/hardware.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include <plat/fpga.h>
 
-
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
  * debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t			lock;
-static struct h2p2_dbg_fpga __iomem	*fpga;
-static u16				led_state, hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api()	1
-#else
-#define new_led_api()	0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- *  - timer and idle leds (some boards use non-FPGA leds here);
- *  - up to 4 generic leds, easily accessed in-kernel (any context)
  */
 
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (fpga)
-			led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER,
-					led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	/* LED lit iff busy */
-	case led_idle_start:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
+static struct h2p2_dbg_fpga __iomem *fpga;
 
-	case led_idle_end:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- *  - with syfs access and generic triggering
- *  - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
 
 struct dbg_led {
 	struct led_classdev	cdev;
 	u16			mask;
 };
 
-static struct dbg_led dbg_leds[] = {
-	/* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
-	{ .mask = 1 << 0,  .cdev.name =  "d4:green",
-		.cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
-	{ .mask = 1 << 1,  .cdev.name =  "d5:green", },		/* !idle */
-#endif
-	{ .mask = 1 << 2,  .cdev.name =  "d6:green", },
-	{ .mask = 1 << 3,  .cdev.name =  "d7:green", },
-
-	{ .mask = 1 << 4,  .cdev.name =  "d8:green", },
-	{ .mask = 1 << 5,  .cdev.name =  "d9:green", },
-	{ .mask = 1 << 6,  .cdev.name = "d10:green", },
-	{ .mask = 1 << 7,  .cdev.name = "d11:green", },
-
-	{ .mask = 1 << 8,  .cdev.name = "d12:green", },
-	{ .mask = 1 << 9,  .cdev.name = "d13:green", },
-	{ .mask = 1 << 10, .cdev.name = "d14:green", },
-	{ .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef	CONFIG_LEDS
-	{ .mask = 1 << 12, .cdev.name = "d16:green", },
-	{ .mask = 1 << 13, .cdev.name = "d17:green", },
-	{ .mask = 1 << 14, .cdev.name = "d18:green", },
-	{ .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+	const char *name;
+	const char *trigger;
+} dbg_leds[] = {
+	{ "dbg:d4", "heartbeat", },
+	{ "dbg:d5", "cpu0", },
+	{ "dbg:d6", "default-on", },
+	{ "dbg:d7", },
+	{ "dbg:d8", },
+	{ "dbg:d9", },
+	{ "dbg:d10", },
+	{ "dbg:d11", },
+	{ "dbg:d12", },
+	{ "dbg:d13", },
+	{ "dbg:d14", },
+	{ "dbg:d15", },
+	{ "dbg:d16", },
+	{ "dbg:d17", },
+	{ "dbg:d18", },
+	{ "dbg:d19", },
 };
 
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	struct dbg_led	*led = container_of(cdev, struct dbg_led, cdev);
-	unsigned long	flags;
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
 
-	spin_lock_irqsave(&lock, flags);
-	if (value == LED_OFF)
-		hw_led_state &= ~led->mask;
+	reg = __raw_readw(&fpga->leds);
+	if (b != LED_OFF)
+		reg |= led->mask;
 	else
-		hw_led_state |= led->mask;
-	__raw_writew(~hw_led_state, &fpga->leds);
-	spin_unlock_irqrestore(&lock, flags);
+		reg &= ~led->mask;
+	__raw_writew(reg, &fpga->leds);
 }
 
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
 {
-	unsigned	i;
-	struct dbg_led	*led;
-	int		status;
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
 
-	for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
-		led->cdev.brightness_set = fpga_led_set;
-		status = led_classdev_register(dev, &led->cdev);
-		if (status < 0)
-			break;
-	}
-	return;
+	reg = __raw_readw(&fpga->leds);
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
 }
 
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
 {
 	struct resource	*iomem;
-
-	spin_lock_init(&lock);
+	int i;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!iomem)
 		return -ENODEV;
 
 	fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
-	__raw_writew(~0, &fpga->leds);
+	__raw_writew(0xff, &fpga->leds);
+
+	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+		struct dbg_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
 
-#ifdef	CONFIG_LEDS
-	leds_event = h2p2_dbg_leds_event;
-	leds_event(led_start);
-#endif
+		led->cdev.name = dbg_leds[i].name;
+		led->cdev.brightness_set = dbg_led_set;
+		led->cdev.brightness_get = dbg_led_get;
+		led->cdev.default_trigger = dbg_leds[i].trigger;
+		led->mask = BIT(i);
 
-	if (new_led_api()) {
-		newled_init(&pdev->dev);
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
 	}
 
 	return 0;
@@ -281,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
 
 static int fpga_suspend_noirq(struct device *dev)
 {
-	__raw_writew(~0, &fpga->leds);
+	fpga_led_state = __raw_readw(&fpga->leds);
+	__raw_writew(0xff, &fpga->leds);
+
 	return 0;
 }
 
 static int fpga_resume_noirq(struct device *dev)
 {
-	__raw_writew(~hw_led_state, &fpga->leds);
+	__raw_writew(~fpga_led_state, &fpga->leds);
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
deleted file mode 100644
index 1cba9273d2cb..000000000000
--- a/arch/arm/plat-omap/devices.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <plat/menelaus.h>
-#include <plat/omap44xx.h>
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name		= "omap_rng",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- *  (a) Does any "standard config" pin muxing needed.  Board-specific
- *	code will have muxed GPIO pins and done "nonstandard" setup;
- *	that code could live in the boot loader.
- *  (b) Populating board-specific platform_data with the data drivers
- *	rely on to handle wiring variations.
- *  (c) Creating platform devices as meaningful on this board and
- *	with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers.  So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible.  In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	omap_init_rng();
-	return 0;
-}
-arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fe626761e53..c76ed8bff838 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,8 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#include <mach/hardware.h>
+#include <plat/cpu.h>
 #include <plat/dma.h>
-
 #include <plat/tc.h>
 
 /*
@@ -969,8 +968,7 @@ void omap_stop_dma(int lch)
 			l = p->dma_read(CCR, lch);
 		}
 		if (i >= 100)
-			printk(KERN_ERR "DMA drain did not complete on "
-					"lch %d\n", lch);
+			pr_err("DMA drain did not complete on lch %d\n", lch);
 		/* Restore OCP_SYSCONFIG */
 		p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
 	} else {
@@ -1154,8 +1152,7 @@ void omap_dma_link_lch(int lch_head, int lch_queue)
 
 	if ((dma_chan[lch_head].dev_id == -1) ||
 	    (dma_chan[lch_queue].dev_id == -1)) {
-		printk(KERN_ERR "omap_dma: trying to link "
-		       "non requested channels\n");
+		pr_err("omap_dma: trying to link non requested channels\n");
 		dump_stack();
 	}
 
@@ -1181,15 +1178,13 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 
 	if (dma_chan[lch_head].next_lch != lch_queue ||
 	    dma_chan[lch_head].next_lch == -1) {
-		printk(KERN_ERR "omap_dma: trying to unlink "
-		       "non linked channels\n");
+		pr_err("omap_dma: trying to unlink non linked channels\n");
 		dump_stack();
 	}
 
 	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
 	    (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
-		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
-		       "before unlinking\n");
+		pr_err("omap_dma: You need to stop the DMA channels before unlinking\n");
 		dump_stack();
 	}
 
@@ -1831,16 +1826,15 @@ static int omap1_dma_handle_ch(int ch)
 	if ((csr & 0x3f) == 0)
 		return 0;
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
-		printk(KERN_WARNING "Spurious interrupt from DMA channel "
-		       "%d (CSR %04x)\n", ch, csr);
+		pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+			ch, csr);
 		return 0;
 	}
 	if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
-		printk(KERN_WARNING "DMA timeout with device %d\n",
-		       dma_chan[ch].dev_id);
+		pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
 	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
-		printk(KERN_WARNING "DMA synchronization event drop occurred "
-		       "with device %d\n", dma_chan[ch].dev_id);
+		pr_warn("DMA synchronization event drop occurred with device %d\n",
+			dma_chan[ch].dev_id);
 	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
 		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
 	if (likely(dma_chan[ch].callback != NULL))
@@ -1880,21 +1874,19 @@ static int omap2_dma_handle_ch(int ch)
 
 	if (!status) {
 		if (printk_ratelimit())
-			printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
-				ch);
+			pr_warn("Spurious DMA IRQ for lch %d\n", ch);
 		p->dma_write(1 << ch, IRQSTATUS_L0, ch);
 		return 0;
 	}
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
 		if (printk_ratelimit())
-			printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
-					"channel %d\n", status, ch);
+			pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
+				status, ch);
 		return 0;
 	}
 	if (unlikely(status & OMAP_DMA_DROP_IRQ))
-		printk(KERN_INFO
-		       "DMA synchronization event drop occurred with device "
-		       "%d\n", dma_chan[ch].dev_id);
+		pr_info("DMA synchronization event drop occurred with device %d\n",
+			dma_chan[ch].dev_id);
 	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
@@ -2014,8 +2006,9 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 
 	p = pdev->dev.platform_data;
 	if (!p) {
-		dev_err(&pdev->dev, "%s: System DMA initialized without"
-			"platform data\n", __func__);
+		dev_err(&pdev->dev,
+			"%s: System DMA initialized without platform data\n",
+			__func__);
 		return -EINVAL;
 	}
 
@@ -2090,8 +2083,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 		}
 		ret = setup_irq(dma_irq, &omap24xx_dma_irq);
 		if (ret) {
-			dev_err(&pdev->dev, "set_up failed for IRQ %d"
-				"for DMA (error %d)\n", dma_irq, ret);
+			dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
+				dma_irq, ret);
 			goto exit_dma_lch_fail;
 		}
 	}
@@ -2099,8 +2092,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 	/* reserve dma channels 0 and 1 in high security devices */
 	if (cpu_is_omap34xx() &&
 		(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
-		printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
-				"HS ROM code\n");
+		pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
 		dma_chan[0].dev_id = 0;
 		dma_chan[1].dev_id = 1;
 	}
@@ -2108,8 +2100,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 	return 0;
 
 exit_dma_irq_fail:
-	dev_err(&pdev->dev, "unable to request IRQ %d"
-			"for DMA (error %d)\n", dma_irq, ret);
+	dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
+		dma_irq, ret);
 	for (irq_rel = 0; irq_rel < ch;	irq_rel++) {
 		dma_irq = platform_get_irq(pdev, irq_rel);
 		free_irq(dma_irq, (void *)(irq_rel + 1));
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8cad7a9..938b50a33439 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 		timer->reserved = 1;
 		break;
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index dd6f92c99e56..bcbb9d5dc293 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -33,8 +33,6 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
-
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
 static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index db071bc71c4d..6013831a043e 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -32,13 +32,13 @@
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
-#include <plat/mux.h>
 #include <plat/i2c.h>
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
+#define OMAP1_INT_I2C		(32 + 4)
 
 static const char name[] = "omap_i2c";
 
@@ -105,7 +105,7 @@ static inline int omap1_i2c_add_bus(int bus_id)
 	res = pdev->resource;
 	res[0].start = OMAP1_I2C_BASE;
 	res[0].end = res[0].start + OMAP_I2C_SIZE;
-	res[1].start = INT_I2C;
+	res[1].start = OMAP1_INT_I2C;
 	pdata = &i2c_pdata[bus_id - 1];
 
 	/* all OMAP1 have IP version 1 register set */
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
deleted file mode 100644
index e62f20a5c0af..000000000000
--- a/arch/arm/plat-omap/include/plat/board.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <plat/gpio-switch.h>
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *	GEN_1	= 0x01150000
- *	GEN_2	= 0x92200000
- */
-enum {
-	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
-	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
-};
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_STI_CONSOLE	0x4f09
-#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-#define OMAP_TAG_VERSION_STR	0x4f82
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_sti_console_config {
-	unsigned enable:1;
-	u8 channel;
-};
-
-struct omap_camera_sensor_config {
-	u16 reset_gpio;
-	int (*power_on)(void * data);
-	int (*power_off)(void * data);
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-	int default_intensity;
-	int (*set_power)(struct device *dev, int state);
-};
-
-struct omap_fbmem_config {
-	u32 start;
-	u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-	const char *name;
-	int intensity_timer;
-	int blink_timer;
-	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_version_config {
-	char component[12];
-	char version[12];
-};
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-/* OMAP3EVM revision */
-#if defined(CONFIG_MACH_OMAP3EVM)
-u8 get_omap3_evm_rev(void);
-#else
-#define get_omap3_evm_rev() (-EINVAL)
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 656b9862279e..e2e2d045e428 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -19,6 +19,11 @@ struct module;
 struct clk;
 struct clockdomain;
 
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)	(clk->name)
+#define __clk_get_parent(clk)	(clk->parent)
+#define __clk_get_rate(clk)	(clk->rate)
+
 /**
  * struct clkops - some clock function pointers
  * @enable: fn ptr that enables the current clock in hardware
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 68b180edcfff..67da857783ce 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -30,6 +30,8 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+#ifndef __ASSEMBLY__
+
 #include <linux/bitops.h>
 #include <plat/multi.h>
 
@@ -372,7 +374,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx())
+				cpu_is_omap44xx() || soc_is_omap54xx() || \
+				soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -492,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
 OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
 OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
 
+#endif	/* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index c5811d4409b0..0a87b052f8f7 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -31,6 +31,8 @@
 /* Move omap4 specific defines to dma-44xx.h */
 #include "dma-44xx.h"
 
+#define INT_DMA_LCD			25
+
 /* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE		0
 #define OMAP_DMA_MCSI1_TX		1
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 19e7fa577bd0..85868e98c11c 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -60,6 +60,7 @@
 #define OMAP_TIMER_ALWON				0x40000000
 #define OMAP_TIMER_HAS_PWM				0x20000000
 #define OMAP_TIMER_NEEDS_RESET				0x10000000
+#define OMAP_TIMER_HAS_DSP_IRQ				0x08000000
 
 struct omap_timer_capability_dev_attr {
 	u32 timer_capability;
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
deleted file mode 100644
index 5927709b1908..000000000000
--- a/arch/arm/plat-omap/include/plat/dsp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __OMAP_DSP_H__
-#define __OMAP_DSP_H__
-
-#include <linux/types.h>
-
-struct omap_dsp_platform_data {
-	void (*dsp_set_min_opp) (u8 opp_id);
-	u8 (*dsp_get_opp) (void);
-	void (*cpu_set_freq) (unsigned long f);
-	unsigned long (*cpu_get_freq) (void);
-	unsigned long mpu_speed[6];
-
-	/* functions to write and read PRCM registers */
-	void (*dsp_prm_write)(u32, s16 , u16);
-	u32 (*dsp_prm_read)(s16 , u16);
-	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
-	void (*dsp_cm_write)(u32, s16 , u16);
-	u32 (*dsp_cm_read)(s16 , u16);
-	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
-
-	void (*set_bootaddr)(u32);
-	void (*set_bootmode)(u8);
-
-	phys_addr_t phys_mempool_base;
-	phys_addr_t phys_mempool_size;
-};
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-extern void omap_dsp_reserve_sdram_memblock(void);
-#else
-static inline void omap_dsp_reserve_sdram_memblock(void) { }
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
deleted file mode 100644
index 10da0e07c0cf..000000000000
--- a/arch/arm/plat-omap/include/plat/gpio-switch.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * GPIO switch definitions
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
-
-#include <linux/types.h>
-
-/* Cover:
- *	high -> closed
- *	low  -> open
- * Connection:
- *	high -> connected
- *	low  -> disconnected
- * Activity:
- *	high -> active
- *	low  -> inactive
- *
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
-#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY		0x0002
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
-
-struct omap_gpio_switch {
-	const char *name;
-	s16 gpio;
-	unsigned flags:4;
-	unsigned type:4;
-
-	/* Time in ms to debounce when transitioning from
-	 * inactive state to active state. */
-	u16 debounce_rising;
-	/* Same for transition from active to inactive state. */
-	u16 debounce_falling;
-
-	/* notify board-specific code about state changes */
-	void (* notify)(void *data, int state);
-	void *notify_data;
-};
-
-/* Call at init time only */
-extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
-					int count);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
deleted file mode 100644
index 50fb7cc000ea..000000000000
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-
-#define OMAP1_MPUIO_BASE			0xfffb5000
-
-/*
- * These are the omap15xx/16xx offsets. The omap7xx offset are
- * OMAP_MPUIO_ / 2 offsets below.
- */
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x04
-#define OMAP_MPUIO_IO_CNTL		0x08
-#define OMAP_MPUIO_KBR_LATCH		0x10
-#define OMAP_MPUIO_KBC			0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
-#define OMAP_MPUIO_KBD_INT		0x20
-#define OMAP_MPUIO_GPIO_INT		0x24
-#define OMAP_MPUIO_KBD_MASKIT		0x28
-#define OMAP_MPUIO_GPIO_MASKIT		0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
-#define OMAP_MPUIO_LATCH		0x34
-
-#define OMAP34XX_NR_GPIOS		6
-
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT	0x00
-#define OMAP1510_GPIO_DATA_OUTPUT	0x04
-#define OMAP1510_GPIO_DIR_CONTROL	0x08
-#define OMAP1510_GPIO_INT_CONTROL	0x0c
-#define OMAP1510_GPIO_INT_MASK		0x10
-#define OMAP1510_GPIO_INT_STATUS	0x14
-#define OMAP1510_GPIO_PIN_CONTROL	0x18
-
-#define OMAP1510_IH_GPIO_BASE		64
-
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION		0x0000
-#define OMAP1610_GPIO_SYSCONFIG		0x0010
-#define OMAP1610_GPIO_SYSSTATUS		0x0014
-#define OMAP1610_GPIO_IRQSTATUS1	0x0018
-#define OMAP1610_GPIO_IRQENABLE1	0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
-#define OMAP1610_GPIO_DATAIN		0x002c
-#define OMAP1610_GPIO_DATAOUT		0x0030
-#define OMAP1610_GPIO_DIRECTION		0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1	0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2	0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT	0x00f0
-
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT		0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
-#define OMAP7XX_GPIO_DIR_CONTROL	0x08
-#define OMAP7XX_GPIO_INT_CONTROL	0x0c
-#define OMAP7XX_GPIO_INT_MASK		0x10
-#define OMAP7XX_GPIO_INT_STATUS		0x14
-
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION		0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2	0x0028
-#define OMAP24XX_GPIO_IRQENABLE2	0x002c
-#define OMAP24XX_GPIO_IRQENABLE1	0x001c
-#define OMAP24XX_GPIO_WAKE_EN		0x0020
-#define OMAP24XX_GPIO_CTRL		0x0030
-#define OMAP24XX_GPIO_OE		0x0034
-#define OMAP24XX_GPIO_DATAIN		0x0038
-#define OMAP24XX_GPIO_DATAOUT		0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
-#define OMAP24XX_GPIO_RISINGDETECT	0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN	0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL	0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
-#define OMAP24XX_GPIO_SETWKUENA		0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
-#define OMAP24XX_GPIO_SETDATAOUT	0x0094
-
-#define OMAP4_GPIO_REVISION		0x0000
-#define OMAP4_GPIO_EOI			0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
-#define OMAP4_GPIO_IRQSTATUS0		0x002c
-#define OMAP4_GPIO_IRQSTATUS1		0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
-#define OMAP4_GPIO_IRQWAKEN0		0x0044
-#define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_IRQENABLE1		0x011c
-#define OMAP4_GPIO_WAKE_EN		0x0120
-#define OMAP4_GPIO_IRQSTATUS2		0x0128
-#define OMAP4_GPIO_IRQENABLE2		0x012c
-#define OMAP4_GPIO_CTRL			0x0130
-#define OMAP4_GPIO_OE			0x0134
-#define OMAP4_GPIO_DATAIN		0x0138
-#define OMAP4_GPIO_DATAOUT		0x013c
-#define OMAP4_GPIO_LEVELDETECT0		0x0140
-#define OMAP4_GPIO_LEVELDETECT1		0x0144
-#define OMAP4_GPIO_RISINGDETECT		0x0148
-#define OMAP4_GPIO_FALLINGDETECT	0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
-#define OMAP4_GPIO_SETIRQENABLE1	0x0164
-#define OMAP4_GPIO_CLEARWKUENA		0x0180
-#define OMAP4_GPIO_SETWKUENA		0x0184
-#define OMAP4_GPIO_CLEARDATAOUT		0x0190
-#define OMAP4_GPIO_SETDATAOUT		0x0194
-
-#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
-
-struct omap_gpio_dev_attr {
-	int bank_width;		/* GPIO bank width */
-	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
-};
-
-struct omap_gpio_reg_offs {
-	u16 revision;
-	u16 direction;
-	u16 datain;
-	u16 dataout;
-	u16 set_dataout;
-	u16 clr_dataout;
-	u16 irqstatus;
-	u16 irqstatus2;
-	u16 irqstatus_raw0;
-	u16 irqstatus_raw1;
-	u16 irqenable;
-	u16 irqenable2;
-	u16 set_irqenable;
-	u16 clr_irqenable;
-	u16 debounce;
-	u16 debounce_en;
-	u16 ctrl;
-	u16 wkup_en;
-	u16 leveldetect0;
-	u16 leveldetect1;
-	u16 risingdetect;
-	u16 fallingdetect;
-	u16 irqctrl;
-	u16 edgectrl1;
-	u16 edgectrl2;
-	u16 pinctrl;
-
-	bool irqenable_inv;
-};
-
-struct omap_gpio_platform_data {
-	int bank_type;
-	int bank_width;		/* GPIO bank width */
-	int bank_stride;	/* Only needed for omap1 MPUIO */
-	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
-	bool loses_context;	/* whether the bank would ever lose context */
-	bool is_mpuio;		/* whether the bank is of type MPUIO */
-	u32 non_wakeup_gpios;
-
-	struct omap_gpio_reg_offs *regs;
-
-	/* Return context loss count due to PM states changing */
-	int (*get_context_loss_count)(struct device *dev);
-};
-
-extern void omap2_gpio_prepare_for_idle(int off_mode);
-extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-/*-------------------------------------------------------------------------*/
-
-/*
- * Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- *
- * The original OMAP-specific calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index f37764a36072..2e6e2597178c 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -133,6 +133,25 @@ struct gpmc_timings {
 	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
 };
 
+struct gpmc_nand_regs {
+	void __iomem	*gpmc_status;
+	void __iomem	*gpmc_nand_command;
+	void __iomem	*gpmc_nand_address;
+	void __iomem	*gpmc_nand_data;
+	void __iomem	*gpmc_prefetch_config1;
+	void __iomem	*gpmc_prefetch_config2;
+	void __iomem	*gpmc_prefetch_control;
+	void __iomem	*gpmc_prefetch_status;
+	void __iomem	*gpmc_ecc_config;
+	void __iomem	*gpmc_ecc_control;
+	void __iomem	*gpmc_ecc_size_config;
+	void __iomem	*gpmc_ecc1_result;
+	void __iomem	*gpmc_bch_result0;
+};
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
 extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
 extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
deleted file mode 100644
index ddbde38e1e33..000000000000
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <plat/cpu.h>
-#endif
-#include <plat/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-#include <plat/ti81xx.h>
-#include <plat/am33xx.h>
-#include <plat/omap54xx.h>
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 88be3e628b33..68b5f0362f35 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -103,6 +103,19 @@ struct iommu_functions {
 	ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
 };
 
+/**
+ * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
+ * @da_start:		device address where the va space starts.
+ * @da_end:		device address where the va space ends.
+ * @nr_tlb_entries:	number of entries supported by the translation
+ *			look-aside buffer (TLB).
+ */
+struct omap_mmu_dev_attr {
+	u32 da_start;
+	u32 da_end;
+	int nr_tlb_entries;
+};
+
 struct iommu_platform_data {
 	const char *name;
 	const char *clk_name;
@@ -126,6 +139,7 @@ struct omap_iommu_arch_data {
 	struct omap_iommu *iommu_dev;
 };
 
+#ifdef CONFIG_IOMMU_API
 /**
  * dev_to_omap_iommu() - retrieves an omap iommu object from a user device
  * @dev: iommu client device
@@ -136,6 +150,7 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
 
 	return arch_data->iommu_dev;
 }
+#endif
 
 /* IOMMU errors */
 #define OMAP_IOMMU_ERR_TLB_MISS		(1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h
deleted file mode 100644
index 518322c80116..000000000000
--- a/arch/arm/plat-omap/include/plat/irqs-44xx.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * OMAP4 Interrupt lines definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-
-/* OMAP44XX IRQs numbers definitions */
-#define OMAP44XX_IRQ_LOCALTIMER			29
-#define OMAP44XX_IRQ_LOCALWDT			30
-
-#define OMAP44XX_IRQ_GIC_START			32
-
-#define OMAP44XX_IRQ_PL310			(0 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI0			(1 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI1			(2 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ELM			(4 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_1N			(7 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SECURITY_EVENTS		(8 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_DBG			(9 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_APP			(10 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PRCM			(11 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_0			(12 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_1			(13 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_2			(14 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_3			(15 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP4			(16 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP1			(17 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_MCU			(18 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_CORE			(19 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPMC			(20 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GFX			(21 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP2			(22 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP3			(23 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ISS_5			(24 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DISPC			(25 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MAIL_U0			(26 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_0			(27 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TESLA_MMU			(28 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO1			(29 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO2			(30 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO3			(31 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO4			(32 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO5			(33 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO6			(34 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_USIM			(35 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT3			(36 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT1			(37 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT2			(38 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT3			(39 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT4			(40 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT5			(41 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT6			(42 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT7			(43 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT8			(44 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT9			(45 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT10			(46 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT11			(47 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI4			(48 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_S			(49 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S		(50 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_P			(51 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_RNG			(52 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI1			(53 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C1			(56 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C2			(57 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HDQ			(58 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC5			(59 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C3			(61 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C4			(62 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_S			(63 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_P			(64 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI1			(65 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI2			(66 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P1			(67 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P2			(68 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FDIF_3			(69 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART4			(70 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_DMA			(71 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART1			(72 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART2			(73 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART3			(74 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PBIAS			(75 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_OHCI			(76 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EHCI			(77 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TLL			(78 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_S			(79 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT2			(80 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_S			(81 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_P			(82 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC1			(83 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI2			(84 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_P			(85 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC2			(86 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MPU_ICR			(87 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_1			(88 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB			(89 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB_SMI			(90 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI3			(91 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_MC_N		(92 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_DMA_N		(93 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC3			(94 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT12			(95 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC4			(96 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS1			(97 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS2			(98 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ABE			(99 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DUCATI_MMU			(100 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_HDMI			(101 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_IVA			(102 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1	(103 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0	(104 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0	(107 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AR			(108 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AX			(109 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_1			(110 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_2			(111 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCPDM			(112 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMM			(113 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMIC			(114 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_0			(115 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_1			(116 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_2			(117 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_3			(118 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_2N			(119 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_KBD_CTL			(120 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UNIPRO1			(124 + OMAP44XX_IRQ_GIC_START)
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
deleted file mode 100644
index 37bbbbb981b2..000000000000
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/* All OMAP4 specific defines are moved to irqs-44xx.h */
-#include "irqs-44xx.h"
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 1
- */
-#define INT_7XX_IH2_FIQ		0
-#define INT_7XX_IH2_IRQ		1
-#define INT_7XX_USB_NON_ISO	2
-#define INT_7XX_USB_ISO		3
-#define INT_7XX_ICR		4
-#define INT_7XX_EAC		5
-#define INT_7XX_GPIO_BANK1	6
-#define INT_7XX_GPIO_BANK2	7
-#define INT_7XX_GPIO_BANK3	8
-#define INT_7XX_McBSP2TX	10
-#define INT_7XX_McBSP2RX	11
-#define INT_7XX_McBSP2RX_OVF	12
-#define INT_7XX_LCD_LINE	14
-#define INT_7XX_GSM_PROTECT	15
-#define INT_7XX_TIMER3		16
-#define INT_7XX_GPIO_BANK5	17
-#define INT_7XX_GPIO_BANK6	18
-#define INT_7XX_SPGIO_WR	29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		32
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_SOSSI_MATCH		(19 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-#define INT_1610_SHA1MD5	(91 + IH2_BASE)
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 2
- */
-#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
-#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_7XX_CFCD		(2 + IH2_BASE)
-#define INT_7XX_CFIREQ		(3 + IH2_BASE)
-#define INT_7XX_I2C		(4 + IH2_BASE)
-#define INT_7XX_PCC		(5 + IH2_BASE)
-#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
-#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
-#define INT_7XX_VLYNQ		(9 + IH2_BASE)
-#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
-#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
-#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_7XX_MCSI		(16 + IH2_BASE)
-#define INT_7XX_uWireTX		(17 + IH2_BASE)
-#define INT_7XX_uWireRX		(18 + IH2_BASE)
-#define INT_7XX_SMC_CD		(19 + IH2_BASE)
-#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
-#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_7XX_TIMER32K	(22 + IH2_BASE)
-#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
-#define INT_7XX_UPLD		(24 + IH2_BASE)
-#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
-#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
-#define INT_7XX_USB_GENI	(29 + IH2_BASE)
-#define INT_7XX_USB_OTG		(30 + IH2_BASE)
-#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
-#define INT_7XX_RNG		(32 + IH2_BASE)
-#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
-#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
-#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
-#define INT_7XX_MPUIO		(39 + IH2_BASE)
-#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
-#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
-#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
-#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
-#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
-#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
-#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
-#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
-#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
-#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
-#define INT_7XX_NAND		(63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ	7
-#define INT_24XX_SDMA_IRQ0	12
-#define INT_24XX_SDMA_IRQ1	13
-#define INT_24XX_SDMA_IRQ2	14
-#define INT_24XX_SDMA_IRQ3	15
-#define INT_24XX_CAM_IRQ	24
-#define INT_24XX_DSS_IRQ	25
-#define INT_24XX_MAIL_U0_MPU	26
-#define INT_24XX_DSP_UMA	27
-#define INT_24XX_DSP_MMU	28
-#define INT_24XX_GPIO_BANK1	29
-#define INT_24XX_GPIO_BANK2	30
-#define INT_24XX_GPIO_BANK3	31
-#define INT_24XX_GPIO_BANK4	32
-#define INT_24XX_GPIO_BANK5	33
-#define INT_24XX_MAIL_U3_MPU	34
-#define INT_24XX_GPTIMER1	37
-#define INT_24XX_GPTIMER2	38
-#define INT_24XX_GPTIMER3	39
-#define INT_24XX_GPTIMER4	40
-#define INT_24XX_GPTIMER5	41
-#define INT_24XX_GPTIMER6	42
-#define INT_24XX_GPTIMER7	43
-#define INT_24XX_GPTIMER8	44
-#define INT_24XX_GPTIMER9	45
-#define INT_24XX_GPTIMER10	46
-#define INT_24XX_GPTIMER11	47
-#define INT_24XX_GPTIMER12	48
-#define INT_24XX_SHA1MD5	51
-#define INT_24XX_MCBSP4_IRQ_TX	54
-#define INT_24XX_MCBSP4_IRQ_RX	55
-#define INT_24XX_I2C1_IRQ	56
-#define INT_24XX_I2C2_IRQ	57
-#define INT_24XX_HDQ_IRQ	58
-#define INT_24XX_MCBSP1_IRQ_TX	59
-#define INT_24XX_MCBSP1_IRQ_RX	60
-#define INT_24XX_MCBSP2_IRQ_TX	62
-#define INT_24XX_MCBSP2_IRQ_RX	63
-#define INT_24XX_SPI1_IRQ	65
-#define INT_24XX_SPI2_IRQ	66
-#define INT_24XX_UART1_IRQ	72
-#define INT_24XX_UART2_IRQ	73
-#define INT_24XX_UART3_IRQ	74
-#define INT_24XX_USB_IRQ_GEN	75
-#define INT_24XX_USB_IRQ_NISO	76
-#define INT_24XX_USB_IRQ_ISO	77
-#define INT_24XX_USB_IRQ_HGEN	78
-#define INT_24XX_USB_IRQ_HSOF	79
-#define INT_24XX_USB_IRQ_OTG	80
-#define INT_24XX_MCBSP5_IRQ_TX	81
-#define INT_24XX_MCBSP5_IRQ_RX	82
-#define INT_24XX_MMC_IRQ	83
-#define INT_24XX_MMC2_IRQ	86
-#define INT_24XX_MCBSP3_IRQ_TX	89
-#define INT_24XX_MCBSP3_IRQ_RX	90
-#define INT_24XX_SPI3_IRQ	91
-
-#define INT_243X_MCBSP2_IRQ	16
-#define INT_243X_MCBSP3_IRQ	17
-#define INT_243X_MCBSP4_IRQ	18
-#define INT_243X_MCBSP5_IRQ	19
-#define INT_243X_MCBSP1_IRQ	64
-#define INT_243X_HS_USB_MC	92
-#define INT_243X_HS_USB_DMA	93
-#define INT_243X_CARKIT_IRQ	94
-
-#define INT_34XX_BENCH_MPU_EMUL	3
-#define INT_34XX_ST_MCBSP2_IRQ	4
-#define INT_34XX_ST_MCBSP3_IRQ	5
-#define INT_34XX_SSM_ABORT_IRQ	6
-#define INT_34XX_SYS_NIRQ	7
-#define INT_34XX_D2D_FW_IRQ	8
-#define INT_34XX_L3_DBG_IRQ     9
-#define INT_34XX_L3_APP_IRQ     10
-#define INT_34XX_PRCM_MPU_IRQ	11
-#define INT_34XX_MCBSP1_IRQ	16
-#define INT_34XX_MCBSP2_IRQ	17
-#define INT_34XX_GPMC_IRQ	20
-#define INT_34XX_MCBSP3_IRQ	22
-#define INT_34XX_MCBSP4_IRQ	23
-#define INT_34XX_CAM_IRQ	24
-#define INT_34XX_MCBSP5_IRQ	27
-#define INT_34XX_GPIO_BANK1	29
-#define INT_34XX_GPIO_BANK2	30
-#define INT_34XX_GPIO_BANK3	31
-#define INT_34XX_GPIO_BANK4	32
-#define INT_34XX_GPIO_BANK5	33
-#define INT_34XX_GPIO_BANK6	34
-#define INT_34XX_USIM_IRQ	35
-#define INT_34XX_WDT3_IRQ	36
-#define INT_34XX_SPI4_IRQ	48
-#define INT_34XX_SHA1MD52_IRQ	49
-#define INT_34XX_FPKA_READY_IRQ	50
-#define INT_34XX_SHA1MD51_IRQ	51
-#define INT_34XX_RNG_IRQ	52
-#define INT_34XX_I2C3_IRQ	61
-#define INT_34XX_FPKA_ERROR_IRQ	64
-#define INT_34XX_PBIAS_IRQ	75
-#define INT_34XX_OHCI_IRQ	76
-#define INT_34XX_EHCI_IRQ	77
-#define INT_34XX_TLL_IRQ	78
-#define INT_34XX_PARTHASH_IRQ	79
-#define INT_34XX_MMC3_IRQ	94
-#define INT_34XX_GPT12_IRQ	95
-
-#define INT_36XX_UART4_IRQ	80
-
-#define INT_35XX_HECC0_IRQ		24
-#define INT_35XX_HECC1_IRQ		28
-#define INT_35XX_EMAC_C0_RXTHRESH_IRQ	67
-#define INT_35XX_EMAC_C0_RX_PULSE_IRQ	68
-#define INT_35XX_EMAC_C0_TX_PULSE_IRQ	69
-#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ	70
-#define INT_35XX_USBOTG_IRQ		71
-#define INT_35XX_UART4_IRQ		84
-#define INT_35XX_CCDC_VD0_IRQ		88
-#define INT_35XX_CCDC_VD1_IRQ		92
-#define INT_35XX_CCDC_VD2_IRQ		93
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef	CONFIG_TWL4030_CORE
-#define	TWL4030_BASE_NR_IRQS	8
-#define	TWL4030_PWR_NR_IRQS	8
-#else
-#define	TWL4030_BASE_NR_IRQS	0
-#define	TWL4030_PWR_NR_IRQS	0
-#endif
-#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
-#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_GPIO_TWL4030
-#define TWL4030_GPIO_NR_IRQS	18
-#else
-#define	TWL4030_GPIO_NR_IRQS	0
-#endif
-#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-#define	TWL6030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define	TWL6030_BASE_NR_IRQS	20
-#else
-#define	TWL6030_BASE_NR_IRQS	0
-#endif
-#define TWL6030_IRQ_END		(TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
-
-#define TWL6040_CODEC_IRQ_BASE	TWL6030_IRQ_END
-#ifdef CONFIG_TWL6040_CODEC
-#define TWL6040_CODEC_NR_IRQS	6
-#else
-#define TWL6040_CODEC_NR_IRQS	0
-#endif
-#define TWL6040_CODEC_IRQ_END	(TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
-#define TWL_IRQ_END 		TWL4030_GPIO_IRQ_END
-#else
-#define TWL_IRQ_END		TWL6040_CODEC_IRQ_END
-#endif
-
-/* GPMC related */
-#define OMAP_GPMC_IRQ_BASE	(TWL_IRQ_END)
-#define OMAP_GPMC_NR_IRQS	8
-#define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
-
-/* PRCM IRQ handler */
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
-#define OMAP_PRCM_NR_IRQS	64
-#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
-#else
-#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
-#endif
-
-#define NR_IRQS			OMAP_PRCM_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#define INTCPS_NR_MIR_REGS	3
-#define INTCPS_NR_IRQS		96
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_FIQ
-#define FIQ_START		1024
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
deleted file mode 100644
index a6b21eddb212..000000000000
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/keypad.h
- *
- *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-#ifndef CONFIG_ARCH_OMAP1
-#warning Please update the board to use matrix-keypad driver
-#define omap_readw(reg)		0
-#define omap_writew(val, reg)	do {} while (0)
-#endif
-#include <linux/input/matrix_keypad.h>
-
-struct omap_kp_platform_data {
-	int rows;
-	int cols;
-	const struct matrix_keymap_data *keymap_data;
-	bool rep;
-	unsigned long delay;
-	bool dbounce;
-	/* specific to OMAP242x*/
-	unsigned int *row_gpios;
-	unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. Two free bits, not used by neither row/col nor keynum,
- * must be available for use as group bits. The below GROUP_SHIFT
- * macro definition is based on some prior knowledge of the
- * matrix_keypad defined KEY() macro internals.
- */
-#define GROUP_SHIFT	14
-#define GROUP_0		(0 << GROUP_SHIFT)
-#define GROUP_1		(1 << GROUP_SHIFT)
-#define GROUP_2		(2 << GROUP_SHIFT)
-#define GROUP_3		(3 << GROUP_SHIFT)
-#define GROUP_MASK	GROUP_3
-#if KEY_MAX & GROUP_MASK
-#error Group bits in conflict with keynum bits
-#endif
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
deleted file mode 100644
index 8e52c6572281..000000000000
--- a/arch/arm/plat-omap/include/plat/lcd_mipid.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __LCD_MIPID_H
-#define __LCD_MIPID_H
-
-enum mipid_test_num {
-	MIPID_TEST_RGB_LINES,
-};
-
-enum mipid_test_result {
-	MIPID_TEST_SUCCESS,
-	MIPID_TEST_INVALID,
-	MIPID_TEST_FAILED,
-};
-
-#ifdef __KERNEL__
-
-struct mipid_platform_data {
-	int	nreset_gpio;
-	int	data_lines;
-
-	void	(*shutdown)(struct mipid_platform_data *pdata);
-	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
-				     int level);
-	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
-	int	(*get_bklight_max)(struct mipid_platform_data *pdata);
-};
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
deleted file mode 100644
index 18814127809a..000000000000
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-
-#define MCBSP_CONFIG_TYPE2	0x2
-#define MCBSP_CONFIG_TYPE3	0x3
-#define MCBSP_CONFIG_TYPE4	0x4
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	struct omap_mcbsp_ops *ops;
-	u16 buffer_size;
-	u8 reg_size;
-	u8 reg_step;
-
-	/* McBSP platform and instance specific features */
-	bool has_wakeup; /* Wakeup capability */
-	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
-	int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
-	int (*mux_signal)(struct device *dev, const char *signal, const char *src);
-};
-
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
-	const char *sidetone;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
deleted file mode 100644
index a357eb26bd25..000000000000
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _OMAP2_MCSPI_H
-#define _OMAP2_MCSPI_H
-
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
-#define OMAP4_MCSPI_REG_OFFSET 0x100
-
-struct omap2_mcspi_platform_config {
-	unsigned short	num_cs;
-	unsigned int regs_offset;
-};
-
-struct omap2_mcspi_dev_attr {
-	unsigned short num_chipselect;
-};
-
-struct omap2_mcspi_device_config {
-	unsigned turbo_mode:1;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index eb3e4d555343..8b4e4f2da2f5 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -15,7 +15,6 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
-#include <plat/board.h>
 #include <plat/omap_hwmod.h>
 
 #define OMAP15XX_NR_MMC		1
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 045e320f1067..324d31b14852 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
deleted file mode 100644
index 67fc5060183e..000000000000
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/gpmc.h>
-#include <linux/mtd/partitions.h>
-
-enum nand_io {
-	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
-	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
-	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
-	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
-};
-
-struct omap_nand_platform_data {
-	int			cs;
-	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
-	int			nr_parts;
-	bool			dev_ready;
-	int			gpmc_irq;
-	enum nand_io		xfer_type;
-	unsigned long		phys_base;
-	int			devsize;
-	enum omap_ecc           ecc_opt;
-};
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725ffcf2..f4a4cd014795 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,11 +18,9 @@
 #define __OMAP_SERIAL_H__
 
 #include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
 #include <linux/pm_qos.h>
 
-#include <plat/mux.h>
-
 #define DRIVER_NAME	"omap_uart"
 
 /*
@@ -42,10 +40,10 @@
 #define OMAP_UART_WER_MOD_WKUP	0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX		0x04
+#define OMAP_UART_SW_TX		0x8
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX		0x04
+#define OMAP_UART_SW_RX		0x2
 
 #define OMAP_UART_SYSC_RESET	0X07
 #define OMAP_UART_TCR_TRIG	0X0F
@@ -54,7 +52,7 @@
 
 #define OMAP_UART_DMA_CH_FREE	-1
 
-#define OMAP_MAX_HSUART_PORTS	4
+#define OMAP_MAX_HSUART_PORTS	6
 
 #define MSR_SAVE_FLAGS		UART_MSR_ANY_DELTA
 
@@ -69,11 +67,14 @@ struct omap_uart_port_info {
 	unsigned int		dma_rx_timeout;
 	unsigned int		autosuspend_timeout;
 	unsigned int		dma_rx_poll_rate;
+	int			DTR_gpio;
+	int			DTR_inverted;
+	int			DTR_present;
 
 	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct platform_device *);
-	void (*set_noidle)(struct platform_device *);
-	void (*enable_wakeup)(struct platform_device *, bool);
+	void (*set_forceidle)(struct device *);
+	void (*set_noidle)(struct device *);
+	void (*enable_wakeup)(struct device *, bool);
 };
 
 struct uart_omap_dma {
@@ -102,39 +103,4 @@ struct uart_omap_dma {
 	unsigned int		rx_timeout;
 };
 
-struct uart_omap_port {
-	struct uart_port	port;
-	struct uart_omap_dma	uart_dma;
-	struct platform_device	*pdev;
-
-	unsigned char		ier;
-	unsigned char		lcr;
-	unsigned char		mcr;
-	unsigned char		fcr;
-	unsigned char		efr;
-	unsigned char		dll;
-	unsigned char		dlh;
-	unsigned char		mdr1;
-	unsigned char		scr;
-
-	int			use_dma;
-	/*
-	 * Some bits in registers are cleared on a read, so they must
-	 * be saved whenever the register is read but the bits will not
-	 * be immediately processed.
-	 */
-	unsigned int		lsr_break_flag;
-	unsigned char		msr_saved_flags;
-	char			name[20];
-	unsigned long		port_activity;
-	u32			context_loss_cnt;
-	u32			errata;
-	u8			wakeups_enabled;
-
-	struct pm_qos_request	pm_qos_request;
-	u32			latency;
-	u32			calc_latency;
-	struct work_struct	qos_work;
-};
-
 #endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 4327b2c90c3d..106f50665804 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -60,6 +60,7 @@ extern struct dev_pm_domain omap_device_pm_domain;
  * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
+ * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
  *
  * Integrates omap_hwmod data into Linux platform_device.
  *
@@ -73,6 +74,7 @@ struct omap_device {
 	struct omap_device_pm_latency	*pm_lats;
 	u32				dev_wakeup_lat;
 	u32				_dev_wakeup_lat_limit;
+	unsigned long			_driver_status;
 	u8				pm_lats_cnt;
 	s8				pm_lat_level;
 	u8				hwmods_cnt;
@@ -118,6 +120,10 @@ int omap_device_get_context_loss_count(struct platform_device *pdev);
 
 /* Other */
 
+int omap_device_assert_hardreset(struct platform_device *pdev,
+				 const char *name);
+int omap_device_deassert_hardreset(struct platform_device *pdev,
+				 const char *name);
 int omap_device_idle_hwmods(struct omap_device *od);
 int omap_device_enable_hwmods(struct omap_device *od);
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 6132972aff37..b3349f7b1a2c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -2,7 +2,7 @@
  * omap_hwmod macros, structures
  *
  * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -384,21 +384,38 @@ struct omap_hwmod_omap2_prcm {
 	u8 idlest_stdby_bit;
 };
 
+/*
+ * Possible values for struct omap_hwmod_omap4_prcm.flags
+ *
+ * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
+ *     module-level context loss register associated with them; this
+ *     flag bit should be set in those cases
+ */
+#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
  * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
  * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
+ * @flags: PRCM register capabilities for this IP block
+ *
+ * If @lostcontext_mask is not defined, context loss check code uses
+ * whole register without masking. @lostcontext_mask should only be
+ * defined in cases where @context_offs register is shared by two or
+ * more hwmods.
  */
 struct omap_hwmod_omap4_prcm {
 	u16		clkctrl_offs;
 	u16		rstctrl_offs;
 	u16		rstst_offs;
 	u16		context_offs;
+	u32		lostcontext_mask;
 	u8		submodule_wkdep_bit;
 	u8		modulemode;
+	u8		flags;
 };
 
 
@@ -591,9 +608,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 int __init omap_hwmod_setup_one(const char *name);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
-int _omap_hwmod_enable(struct omap_hwmod *oh);
 int omap_hwmod_idle(struct omap_hwmod *oh);
-int _omap_hwmod_idle(struct omap_hwmod *oh);
 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 
 int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
@@ -615,6 +630,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
 
 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
 int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
 				   const char *name, struct resource *res);
 
@@ -626,11 +642,6 @@ int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
 int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
 				 struct omap_hwmod *init_oh);
 
-int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
-
 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
 
@@ -658,6 +669,7 @@ extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
+extern int am33xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
deleted file mode 100644
index 2858667d2e4f..000000000000
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define ONENAND_SYNC_READ	(1 << 0)
-#define ONENAND_SYNC_READWRITE	(1 << 1)
-
-struct onenand_freq_info {
-	u16			maf_id;
-	u16			dev_id;
-	u16			ver_id;
-};
-
-struct omap_onenand_platform_data {
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
-	int		(*get_freq)(const struct onenand_freq_info *freq_info,
-				    bool *clk_dep);
-	int			dma_channel;
-	u8			flags;
-	u8			regulator_can_sleep;
-	u8			skip_initial_unlocking;
-};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data	NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h
deleted file mode 100644
index 1eb4dc326979..000000000000
--- a/arch/arm/plat-omap/include/plat/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ	CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h
deleted file mode 100644
index b10eac89e2e9..000000000000
--- a/arch/arm/plat-omap/include/plat/remoteproc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Remote Processor - omap-specific bits
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PLAT_REMOTEPROC_H
-#define _PLAT_REMOTEPROC_H
-
-struct rproc_ops;
-struct platform_device;
-
-/*
- * struct omap_rproc_pdata - omap remoteproc's platform data
- * @name: the remoteproc's name
- * @oh_name: omap hwmod device
- * @oh_name_opt: optional, secondary omap hwmod device
- * @firmware: name of firmware file to load
- * @mbox_name: name of omap mailbox device to use with this rproc
- * @ops: start/stop rproc handlers
- * @device_enable: omap-specific handler for enabling a device
- * @device_shutdown: omap-specific handler for shutting down a device
- */
-struct omap_rproc_pdata {
-	const char *name;
-	const char *oh_name;
-	const char *oh_name_opt;
-	const char *firmware;
-	const char *mbox_name;
-	const struct rproc_ops *ops;
-	int (*device_enable) (struct platform_device *pdev);
-	int (*device_shutdown) (struct platform_device *pdev);
-};
-
-#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
-
-void __init omap_rproc_reserve_cma(void);
-
-#else
-
-void __init omap_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-#endif /* _PLAT_REMOTEPROC_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index b8d19a136781..7f7b112acccb 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -110,7 +110,7 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
 	int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 	} while (0);
 }
 
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 548a4c8d63df..87ee140fefaa 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -4,8 +4,8 @@
 #define	__ASM_ARCH_OMAP_USB_H
 
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <linux/usb/musb.h>
-#include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
 
@@ -64,6 +64,10 @@ struct usbhs_omap_platform_data {
 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
 };
+
+struct usbtll_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+};
 /*-------------------------------------------------------------------------*/
 
 struct omap_musb_board_data {
@@ -82,6 +86,8 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
 extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
deleted file mode 100644
index 5be4d5def427..000000000000
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Copyright (C) 2011, Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
-#define __ARCH_ARM_OMAP_VOLTAGE_H
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-struct voltagedomain;
-
-struct voltagedomain *voltdm_lookup(const char *name);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
-		unsigned long volt);
-#endif
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 5e13c3884aa4..42377ef9ea3d 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -310,7 +310,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
 		omap_mbox_disable_irq(mbox, IRQ_RX);
 		free_irq(mbox->irq, mbox);
 		tasklet_kill(&mbox->txq->tasklet);
-		flush_work_sync(&mbox->rxq->work);
+		flush_work(&mbox->rxq->work);
 		mbox_queue_free(mbox->txq);
 		mbox_queue_free(mbox->rxq);
 	}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
deleted file mode 100644
index cff8712122bb..000000000000
--- a/arch/arm/plat-omap/mux.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/mux.c
- *
- * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-
-#include <plat/cpu.h>
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg *mux_cfg;
-
-int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
-{
-	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
-			|| !arch_mux_cfg->cfg_reg) {
-		printk(KERN_ERR "Invalid pin table\n");
-		return -EINVAL;
-	}
-
-	mux_cfg = arch_mux_cfg;
-
-	return 0;
-}
-
-/*
- * Sets the Omap MUX and PULL_DWN registers based on the table
- */
-int __init_or_module omap_cfg_reg(const unsigned long index)
-{
-	struct pin_config *reg;
-
-	if (!cpu_class_is_omap1()) {
-		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
-				index);
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (mux_cfg == NULL) {
-		printk(KERN_ERR "Pin mux table not initialized\n");
-		return -ENODEV;
-	}
-
-	if (index >= mux_cfg->size) {
-		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, mux_cfg->size);
-		dump_stack();
-		return -ENODEV;
-	}
-
-	reg = (struct pin_config *)&mux_cfg->pins[index];
-
-	if (!mux_cfg->cfg_reg)
-		return -ENODEV;
-
-	return mux_cfg->cfg_reg(reg);
-}
-EXPORT_SYMBOL(omap_cfg_reg);
-#else
-#define omap_mux_init() do {} while(0)
-#define omap_cfg_reg(x)	do {} while(0)
-#endif	/* CONFIG_OMAP_MUX */
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 5a97b4d98d41..9f6413324df9 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -41,11 +41,11 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
 	};
 
 	if (t == -1)
-		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
-			 "dev %s\n", dev_name(dev));
+		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
+			 dev_name(dev));
 	else
-		pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
-			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+		pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
+			 dev_name(dev), t);
 
 	/*
 	 * For current Linux, this needs to map the MPU to a
@@ -70,11 +70,10 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
 	};
 
 	if (r == 0)
-		pr_debug("OMAP PM: remove min bus tput constraint: "
-			 "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+		pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
+			 dev_name(dev), agent_id);
 	else
-		pr_debug("OMAP PM: add min bus tput constraint: "
-			 "dev %s for agent_id %d: rate %ld KiB\n",
+		pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
 			 dev_name(dev), agent_id, r);
 
 	/*
@@ -97,11 +96,11 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
 	};
 
 	if (t == -1)
-		pr_debug("OMAP PM: remove max device latency constraint: "
-			 "dev %s\n", dev_name(dev));
+		pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
+			 dev_name(dev));
 	else
-		pr_debug("OMAP PM: add max device latency constraint: "
-			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+		pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
+			 dev_name(dev), t);
 
 	/*
 	 * For current Linux, this needs to map the device to a
@@ -127,11 +126,11 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t)
 	};
 
 	if (t == -1)
-		pr_debug("OMAP PM: remove max DMA latency constraint: "
-			 "dev %s\n", dev_name(dev));
+		pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
+			 dev_name(dev));
 	else
-		pr_debug("OMAP PM: add max DMA latency constraint: "
-			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+		pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
+			 dev_name(dev), t);
 
 	/*
 	 * For current Linux PM QOS params, this code should scan the
@@ -156,11 +155,11 @@ int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
 	}
 
 	if (r == 0)
-		pr_debug("OMAP PM: remove min clk rate constraint: "
-			 "dev %s\n", dev_name(dev));
+		pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
+			 dev_name(dev));
 	else
-		pr_debug("OMAP PM: add min clk rate constraint: "
-			 "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+		pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
+			 dev_name(dev), r);
 
 	/*
 	 * Code in a real implementation should keep track of these
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c490240bb82c..cee85a55bd82 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,4 +1,3 @@
-
 /*
  * omap_device implementation
  *
@@ -153,21 +152,19 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 		act_lat = timespec_to_ns(&c);
 
 		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: activate: elapsed time "
-			"%llu nsec\n", od->pm_lat_level, act_lat);
+			"omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
+			od->pm_lat_level, act_lat);
 
 		if (act_lat > odpl->activate_lat) {
 			odpl->activate_lat_worst = act_lat;
 			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
 				odpl->activate_lat = act_lat;
 				dev_dbg(&od->pdev->dev,
-					"new worst case activate latency "
-					"%d: %llu\n",
+					"new worst case activate latency %d: %llu\n",
 					od->pm_lat_level, act_lat);
 			} else
 				dev_warn(&od->pdev->dev,
-					 "activate latency %d "
-					 "higher than exptected. (%llu > %d)\n",
+					 "activate latency %d higher than expected. (%llu > %d)\n",
 					 od->pm_lat_level, act_lat,
 					 odpl->activate_lat);
 		}
@@ -220,21 +217,19 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 		deact_lat = timespec_to_ns(&c);
 
 		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: deactivate: elapsed time "
-			"%llu nsec\n", od->pm_lat_level, deact_lat);
+			"omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
+			od->pm_lat_level, deact_lat);
 
 		if (deact_lat > odpl->deactivate_lat) {
 			odpl->deactivate_lat_worst = deact_lat;
 			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
 				odpl->deactivate_lat = deact_lat;
 				dev_dbg(&od->pdev->dev,
-					"new worst case deactivate latency "
-					"%d: %llu\n",
+					"new worst case deactivate latency %d: %llu\n",
 					od->pm_lat_level, deact_lat);
 			} else
 				dev_warn(&od->pdev->dev,
-					 "deactivate latency %d "
-					 "higher than exptected. (%llu > %d)\n",
+					 "deactivate latency %d higher than expected. (%llu > %d)\n",
 					 od->pm_lat_level, deact_lat,
 					 odpl->deactivate_lat);
 		}
@@ -266,10 +261,10 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 		return;
 	}
 
-	r = omap_clk_get_by_name(clk_name);
+	r = clk_get(NULL, clk_name);
 	if (IS_ERR(r)) {
 		dev_err(&od->pdev->dev,
-			"omap_clk_get_by_name for %s failed\n", clk_name);
+			"clk_get for %s failed\n", clk_name);
 		return;
 	}
 
@@ -370,6 +365,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 		goto odbfd_exit1;
 	}
 
+	/* Fix up missing resource names */
+	for (i = 0; i < pdev->num_resources; i++) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->name == NULL)
+			r->name = dev_name(&pdev->dev);
+	}
+
 	if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
 		omap_device_disable_idle_on_suspend(pdev);
 
@@ -385,17 +388,21 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 				      unsigned long event, void *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od;
 
 	switch (event) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (pdev->dev.of_node)
-			omap_device_build_from_dt(pdev);
-		break;
-
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (pdev->dev.of_node)
+			omap_device_build_from_dt(pdev);
+		/* fall through */
+	default:
+		od = to_omap_device(pdev);
+		if (od)
+			od->_driver_status = event;
 	}
 
 	return NOTIFY_DONE;
@@ -449,8 +456,8 @@ static int omap_device_count_resources(struct omap_device *od)
 	for (i = 0; i < od->hwmods_cnt; i++)
 		c += omap_hwmod_count_resources(od->hwmods[i]);
 
-	pr_debug("omap_device: %s: counted %d total resources across %d "
-		 "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
+	pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
+		 od->pdev->name, c, od->hwmods_cnt);
 
 	return c;
 }
@@ -486,6 +493,33 @@ static int omap_device_fill_resources(struct omap_device *od,
 }
 
 /**
+ * _od_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od.  Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all.  If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int _od_fill_dma_resources(struct omap_device *od,
+				      struct resource *res)
+{
+	int i, r;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+		res += r;
+	}
+
+	return 0;
+}
+
+/**
  * omap_device_alloc - allocate an omap_device
  * @pdev: platform_device that will be included in this omap_device
  * @oh: ptr to the single omap_hwmod that backs this omap_device
@@ -524,24 +558,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
 	od->hwmods = hwmods;
 	od->pdev = pdev;
 
+	res_count = omap_device_count_resources(od);
 	/*
-	 * HACK: Ideally the resources from DT should match, and hwmod
-	 * should just add the missing ones. Since the name is not
-	 * properly populated by DT, stick to hwmod resources only.
+	 * DT Boot:
+	 *   OF framework will construct the resource structure (currently
+	 *   does for MEM & IRQ resource) and we should respect/use these
+	 *   resources, killing hwmod dependency.
+	 *   If pdev->num_resources > 0, we assume that MEM & IRQ resources
+	 *   have been allocated by OF layer already (through DTB).
+	 *
+	 * Non-DT Boot:
+	 *   Here, pdev->num_resources = 0, and we should get all the
+	 *   resources from hwmod.
+	 *
+	 * TODO: Once DMA resource is available from OF layer, we should
+	 *   kill filling any resources from hwmod.
 	 */
-	if (pdev->num_resources && pdev->resource)
-		dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
-			__func__, pdev->num_resources);
-
-	res_count = omap_device_count_resources(od);
-	if (res_count > 0) {
-		dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
-			__func__, res_count);
+	if (res_count > pdev->num_resources) {
+		/* Allocate resources memory to account for new resources */
 		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
 		if (!res)
 			goto oda_exit3;
 
-		omap_device_fill_resources(od, res);
+		/*
+		 * If pdev->num_resources > 0, then assume that,
+		 * MEM and IRQ resources will only come from DT and only
+		 * fill DMA resource from hwmod layer.
+		 */
+		if (pdev->num_resources && pdev->resource) {
+			dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+				__func__, res_count);
+			memcpy(res, pdev->resource,
+			       sizeof(struct resource) * pdev->num_resources);
+			_od_fill_dma_resources(od, &res[pdev->num_resources]);
+		} else {
+			dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+				__func__, res_count);
+			omap_device_fill_resources(od, res);
+		}
 
 		ret = platform_device_add_resources(pdev, res, res_count);
 		kfree(res);
@@ -752,6 +806,10 @@ static int _od_suspend_noirq(struct device *dev)
 	struct omap_device *od = to_omap_device(pdev);
 	int ret;
 
+	/* Don't attempt late suspend on a driver that is not bound */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
+		return 0;
+
 	ret = pm_generic_suspend_noirq(dev);
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
@@ -925,6 +983,61 @@ int omap_device_shutdown(struct platform_device *pdev)
 }
 
 /**
+ * omap_device_assert_hardreset - set a device's hardreset line
+ * @pdev: struct platform_device * to reset
+ * @name: const char * name of the reset line
+ *
+ * Set the hardreset line identified by @name on the IP blocks
+ * associated with the hwmods backing the platform_device @pdev.  All
+ * of the hwmods associated with @pdev must have the same hardreset
+ * line linked to them for this to work.  Passes along the return value
+ * of omap_hwmod_assert_hardreset() in the event of any failure, or
+ * returns 0 upon success.
+ */
+int omap_device_assert_hardreset(struct platform_device *pdev, const char *name)
+{
+	struct omap_device *od = to_omap_device(pdev);
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		ret = omap_hwmod_assert_hardreset(od->hwmods[i], name);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/**
+ * omap_device_deassert_hardreset - release a device's hardreset line
+ * @pdev: struct platform_device * to reset
+ * @name: const char * name of the reset line
+ *
+ * Release the hardreset line identified by @name on the IP blocks
+ * associated with the hwmods backing the platform_device @pdev.  All
+ * of the hwmods associated with @pdev must have the same hardreset
+ * line linked to them for this to work.  Passes along the return
+ * value of omap_hwmod_deassert_hardreset() in the event of any
+ * failure, or returns 0 upon success.
+ */
+int omap_device_deassert_hardreset(struct platform_device *pdev,
+				   const char *name)
+{
+	struct omap_device *od = to_omap_device(pdev);
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/**
  * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
  * @od: struct omap_device *
  *
@@ -1125,3 +1238,41 @@ static int __init omap_device_init(void)
 	return 0;
 }
 core_initcall(omap_device_init);
+
+/**
+ * omap_device_late_idle - idle devices without drivers
+ * @dev: struct device * associated with omap_device
+ * @data: unused
+ *
+ * Check the driver bound status of this device, and idle it
+ * if there is no driver attached.
+ */
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+
+	if (!od)
+		return 0;
+
+	/*
+	 * If omap_device state is enabled, but has no driver bound,
+	 * idle it.
+	 */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
+				 __func__);
+			omap_device_idle(pdev);
+		}
+	}
+
+	return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+	return 0;
+}
+late_initcall(omap_device_late_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 766181cb5c95..28acb383e7df 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/sram.h>
-#include <plat/board.h>
 #include <plat/cpu.h>
 
 #include "sram.h"
@@ -68,6 +67,7 @@
 
 static unsigned long omap_sram_start;
 static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
 static unsigned long omap_sram_size;
 static void __iomem *omap_sram_ceil;
 
@@ -106,6 +106,7 @@ static int is_sram_locked(void)
  */
 static void __init omap_detect_sram(void)
 {
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
 	if (cpu_class_is_omap2()) {
 		if (is_sram_locked()) {
 			if (cpu_is_omap34xx()) {
@@ -113,6 +114,7 @@ static void __init omap_detect_sram(void)
 				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
 				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
 					omap_sram_size = 0x7000; /* 28K */
+					omap_sram_skip += SZ_16K;
 				} else {
 					omap_sram_size = 0x8000; /* 32K */
 				}
@@ -175,8 +177,10 @@ static void __init omap_map_sram(void)
 		return;
 
 #ifdef CONFIG_OMAP4_ERRATA_I688
+	if (cpu_is_omap44xx()) {
 		omap_sram_start += PAGE_SIZE;
 		omap_sram_size -= SZ_16K;
+	}
 #endif
 	if (cpu_is_omap34xx()) {
 		/*
@@ -203,8 +207,8 @@ static void __init omap_map_sram(void)
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
 	 */
-	memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
-		  omap_sram_size - SRAM_BOOTLOADER_SZ);
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
 }
 
 /*
@@ -218,7 +222,7 @@ void *omap_sram_push_address(unsigned long size)
 {
 	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
 
-	available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
 
 	if (size > available) {
 		pr_err("Not enough space in SRAM\n");
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index c20ce0f5ce33..a82cecb84948 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -1,10 +1,10 @@
 #
 # Makefile for the linux kernel.
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
-obj-y	:= irq.o pcie.o time.o common.o mpp.o addr-map.o
-obj-m	:=
-obj-n	:=
-obj-	:=
+obj-y                             += addr-map.o
 
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
+orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
+obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
+obj-$(CONFIG_PLAT_ORION_LEGACY)   += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
index 367ca89ac403..a7b8060c293a 100644
--- a/arch/arm/plat-orion/addr-map.c
+++ b/arch/arm/plat-orion/addr-map.c
@@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
 static void __init __iomem *
 orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
-	return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
+	return cfg->bridge_virt_base + (win << 4);
 }
 
 /*
@@ -143,19 +143,16 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
  * Setup MBUS dram target info.
  */
 void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const u32 ddr_window_cpu_base)
+					const void __iomem *ddr_window_cpu_base)
 {
-	void __iomem *addr;
 	int i;
 	int cs;
 
 	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
 
-	addr = (void __iomem *)ddr_window_cpu_base;
-
 	for (i = 0, cs = 0; i < 4; i++) {
-		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
-		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+		u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
+		u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
 
 		/*
 		 * Chip select enabled?
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index d245a87dc014..b8a688cad4c2 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -19,8 +19,8 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <mach/bridge-regs.h>
 
 /* Create a clkdev entry for a given device/clk */
@@ -86,13 +86,13 @@ static void __init uart_complete(
 	struct platform_device *orion_uart,
 	struct plat_serial8250_port *data,
 	struct resource *resources,
-	unsigned int membase,
+	void __iomem *membase,
 	resource_size_t mapbase,
 	unsigned int irq,
 	struct clk *clk)
 {
 	data->mapbase = mapbase;
-	data->membase = (void __iomem *)membase;
+	data->membase = membase;
 	data->irq = irq;
 	data->uartclk = uart_get_clk_rate(clk);
 	orion_uart->dev.platform_data = data;
@@ -120,7 +120,7 @@ static struct platform_device orion_uart0 = {
 	.id			= PLAT8250_DEV_PLATFORM,
 };
 
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -148,7 +148,7 @@ static struct platform_device orion_uart1 = {
 	.id			= PLAT8250_DEV_PLATFORM1,
 };
 
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -176,7 +176,7 @@ static struct platform_device orion_uart2 = {
 	.id			= PLAT8250_DEV_PLATFORM2,
 };
 
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -204,7 +204,7 @@ static struct platform_device orion_uart3 = {
 	.id			= 3,
 };
 
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index dfda74fae6f2..c29ee7ea200b 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
 
 /*
  * GPIO unit register offsets.
diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h
index fd556f77562c..ec63e4a627d0 100644
--- a/arch/arm/plat-orion/include/plat/addr-map.h
+++ b/arch/arm/plat-orion/include/plat/addr-map.h
@@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info;
 struct orion_addr_map_cfg {
 	const int num_wins;	/* Total number of windows */
 	const int remappable_wins;
-	const u32 bridge_virt_base;
+	void __iomem *bridge_virt_base;
 
 	/* If NULL, the default cpu_win_can_remap will be used, using
 	   the value in remappable_wins */
@@ -49,5 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
 				const u8 attr, const int remap);
 
 void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const u32 ddr_window_cpu_base);
+					const void __iomem *ddr_window_cpu_base);
 #endif
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
deleted file mode 100644
index d6a55bd2e578..000000000000
--- a/arch/arm/plat-orion/include/plat/audio.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __PLAT_AUDIO_H
-#define __PLAT_AUDIO_H
-
-struct kirkwood_asoc_platform_data {
-	int burst;
-};
-#endif
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e00fdb213609..6bbc3fe5f58e 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -13,22 +13,22 @@
 
 struct dsa_platform_data;
 
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
 
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
 
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
 
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
deleted file mode 100644
index 6fc78e430420..000000000000
--- a/arch/arm/plat-orion/include/plat/ehci-orion.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/ehci-orion.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_EHCI_ORION_H
-#define __PLAT_EHCI_ORION_H
-
-#include <linux/mbus.h>
-
-enum orion_ehci_phy_ver {
-	EHCI_PHY_ORION,
-	EHCI_PHY_DD,
-	EHCI_PHY_KW,
-	EHCI_PHY_NA,
-};
-
-struct orion_ehci_data {
-	enum orion_ehci_phy_ver phy_version;
-};
-
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h
index 723adce99f41..254552fee889 100644
--- a/arch/arm/plat-orion/include/plat/mpp.h
+++ b/arch/arm/plat-orion/include/plat/mpp.h
@@ -29,6 +29,6 @@
 #define MPP_OUTPUT_MASK		GENERIC_MPP(0, 0x0, 0, 1)
 
 void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
-			   unsigned int mpp_max, unsigned int dev_bus);
+			   unsigned int mpp_max, void __iomem *dev_bus);
 
 #endif
diff --git a/arch/arm/plat-orion/include/plat/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h
deleted file mode 100644
index 2ba1f7d76eef..000000000000
--- a/arch/arm/plat-orion/include/plat/mv_xor.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mv_xor.h
- *
- * Marvell XOR platform device data definition file.
- */
-
-#ifndef __PLAT_MV_XOR_H
-#define __PLAT_MV_XOR_H
-
-#include <linux/dmaengine.h>
-#include <linux/mbus.h>
-
-#define MV_XOR_SHARED_NAME	"mv_xor_shared"
-#define MV_XOR_NAME		"mv_xor"
-
-struct mv_xor_platform_data {
-	struct platform_device		*shared;
-	int				hw_id;
-	dma_cap_mask_t			cap_mask;
-	size_t				pool_size;
-};
-
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h
deleted file mode 100644
index 1190efedcb94..000000000000
--- a/arch/arm/plat-orion/include/plat/mvsdio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mvsdio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MVSDIO_H
-#define __MACH_MVSDIO_H
-
-#include <linux/mbus.h>
-
-struct mvsdio_platform_data {
-	unsigned int clock;
-	int gpio_card_detect;
-	int gpio_write_protect;
-};
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index 81c6fc8a7b28..614dcac9dc52 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/plat-orion/include/plat/gpio.h
+ * arch/arm/plat-orion/include/plat/orion-gpio.h
  *
  * Marvell Orion SoC GPIO handling.
  *
diff --git a/arch/arm/plat-orion/include/plat/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h
deleted file mode 100644
index 9f3c180834d1..000000000000
--- a/arch/arm/plat-orion/include/plat/orion_nand.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_nand.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_NAND_H
-#define __PLAT_ORION_NAND_H
-
-/*
- * Device bus NAND private data
- */
-struct orion_nand_data {
-	struct mtd_partition *parts;
-	int (*dev_ready)(struct mtd_info *mtd);
-	u32 nr_parts;
-	u8 ale;		/* address line number connected to ALE */
-	u8 cle;		/* address line number connected to CLE */
-	u8 width;	/* buswidth */
-	u8 chip_delay;
-};
-
-
-#endif
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
index 4d5f1f6e18df..07527e417c62 100644
--- a/arch/arm/plat-orion/include/plat/time.h
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -11,9 +11,9 @@
 #ifndef __PLAT_TIME_H
 #define __PLAT_TIME_H
 
-void orion_time_set_base(u32 timer_base);
+void orion_time_set_base(void __iomem *timer_base);
 
-void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask,
+void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask,
 		     unsigned int irq, unsigned int tclk);
 
 
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index d751964def4c..1867944415ca 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -16,7 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <plat/irq.h>
-#include <plat/gpio.h>
+#include <plat/orion-gpio.h>
 
 void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 {
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 3b1e17bd3d17..e686fe76a96b 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -14,18 +14,19 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
+#include <plat/orion-gpio.h>
 #include <plat/mpp.h>
 
 /* Address of the ith MPP control register */
-static __init unsigned long mpp_ctrl_addr(unsigned int i,
-					  unsigned long dev_bus)
+static __init void __iomem *mpp_ctrl_addr(unsigned int i,
+					  void __iomem *dev_bus)
 {
 	return dev_bus + (i) * 4;
 }
 
 
 void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
-			   unsigned int mpp_max, unsigned int dev_bus)
+			   unsigned int mpp_max, void __iomem *dev_bus)
 {
 	unsigned int mpp_nr_regs = (1 + mpp_max/8);
 	u32 mpp_ctrl[mpp_nr_regs];
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 1ed8d1397fcf..0f4fa863dd55 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -180,13 +180,13 @@ static struct irqaction orion_timer_irq = {
 };
 
 void __init
-orion_time_set_base(u32 _timer_base)
+orion_time_set_base(void __iomem *_timer_base)
 {
-	timer_base = (void __iomem *)_timer_base;
+	timer_base = _timer_base;
 }
 
 void __init
-orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
+orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 		unsigned int irq, unsigned int tclk)
 {
 	u32 u;
@@ -194,7 +194,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Set SoC-specific data.
 	 */
-	bridge_base = (void __iomem *)_bridge_base;
+	bridge_base = _bridge_base;
 	bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
deleted file mode 100644
index 5ce8d5e6ea51..000000000000
--- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-
-#define MAX_MATRIX_KEY_ROWS	(8)
-#define MAX_MATRIX_KEY_COLS	(8)
-#define MATRIX_ROW_SHIFT	(3)
-#define MAX_DIRECT_KEY_NUM	(8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- *    _plus_ the number of rotary-encoder sensor inputs,  this can be
- *    left as 0 if only rotary encoders are enabled,  the driver will
- *    automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- *    default, which should be sufficient in most cases
- *
- * pxa168 keypad platform specific parameter
- *
- * NOTE:
- * clear_wakeup_event callback is a workaround required to clear the
- * keypad interrupt. The keypad wake must be cleared in addition to
- * reading the MI/DI bits in the KPC register.
- */
-struct pxa27x_keypad_platform_data {
-
-	/* code map for the matrix keys */
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
-
-	/* direct keys */
-	int		direct_key_num;
-	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
-	/* the key output may be low active */
-	int		direct_key_low_active;
-	/* give board a chance to choose the start direct key */
-	unsigned int	direct_key_mask;
-
-	/* rotary encoders 0 */
-	int		enable_rotary0;
-	int		rotary0_rel_code;
-	int		rotary0_up_key;
-	int		rotary0_down_key;
-
-	/* rotary encoders 1 */
-	int		enable_rotary1;
-	int		rotary1_rel_code;
-	int		rotary1_up_key;
-	int		rotary1_down_key;
-
-	/* key debounce interval */
-	unsigned int	debounce_interval;
-
-	/* clear wakeup event requirement for pxa168 */
-	void		(*clear_wakeup_event)(void);
-};
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
deleted file mode 100644
index c42f39f20195..000000000000
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
-struct pxa3xx_nand_flash {
-	char		*name;
-	uint32_t	chip_id;
-	unsigned int	page_per_block; /* Pages per block (PG_PER_BLK) */
-	unsigned int	page_size;	/* Page size in bytes (PAGE_SZ) */
-	unsigned int	flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	unsigned int	dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	unsigned int	num_blocks;	/* Number of physical blocks in Flash */
-
-	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
-struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
-
-	const struct pxa3xx_nand_flash * 	flash;
-	size_t					num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 28f898f75380..db98e7021f0d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7aca31c1df1f..9c3b90c3538e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI
 
 config S3C24XX_PWM
 	bool "PWM device support"
-	select HAVE_PWM
+	select PWM
+	select PWM_SAMSUNG
 	help
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 65c5eca475e7..012bbd0b8d81 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -119,7 +119,7 @@ void clk_disable(struct clk *clk)
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	if (IS_ERR(clk))
+	if (IS_ERR_OR_NULL(clk))
 		return 0;
 
 	if (clk->rate != 0)
@@ -136,7 +136,7 @@ unsigned long clk_get_rate(struct clk *clk)
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+	if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->round_rate)
 		return (clk->ops->round_rate)(clk, rate);
 
 	return rate;
@@ -144,9 +144,10 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned long flags;
 	int ret;
 
-	if (IS_ERR(clk))
+	if (IS_ERR_OR_NULL(clk))
 		return -EINVAL;
 
 	/* We do not default just do a clk->rate = rate as
@@ -159,9 +160,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (clk->ops == NULL || clk->ops->set_rate == NULL)
 		return -EINVAL;
 
-	spin_lock(&clocks_lock);
+	spin_lock_irqsave(&clocks_lock, flags);
 	ret = (clk->ops->set_rate)(clk, rate);
-	spin_unlock(&clocks_lock);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 
 	return ret;
 }
@@ -173,17 +174,18 @@ struct clk *clk_get_parent(struct clk *clk)
 
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
+	unsigned long flags;
 	int ret = 0;
 
-	if (IS_ERR(clk))
+	if (IS_ERR_OR_NULL(clk) || IS_ERR_OR_NULL(parent))
 		return -EINVAL;
 
-	spin_lock(&clocks_lock);
+	spin_lock_irqsave(&clocks_lock, flags);
 
 	if (clk->ops && clk->ops->set_parent)
 		ret = (clk->ops->set_parent)(clk, parent);
 
-	spin_unlock(&clocks_lock);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 
 	return ret;
 }
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce35538..03f654d55eff 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,8 +32,9 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
+#include <media/s5p_hdmi.h>
+
 #include <asm/irq.h>
-#include <asm/pmu.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -46,24 +47,25 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <plat/hdmi.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
 
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210())
+		if (soc_is_exynos4210() ||
+		    soc_is_exynos4212() || soc_is_exynos4412())
 			pd->bus_num = 8;
 		else if (soc_is_s5pv210())
 			pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s5p_device_i2c_hdmiphy);
 }
+
+static struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+	if (soc_is_exynos4210() ||
+	    soc_is_exynos4212() || soc_is_exynos4412())
+		pd->hdmiphy_bus = 8;
+	else if (soc_is_s5pv210())
+		pd->hdmiphy_bus = 3;
+	else
+		pd->hdmiphy_bus = 0;
+
+	pd->hdmiphy_info = hdmiphy_info;
+	pd->mhl_info = mhl_info;
+	pd->mhl_bus = mhl_bus;
+
+	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+			 &s5p_device_hdmi);
+}
+
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 
 /* I2S */
@@ -1105,7 +1132,7 @@ static struct resource s5p_pmu_resource[] = {
 
 static struct platform_device s5p_device_pmu = {
 	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s5p_pmu_resource),
 	.resource	= s5p_pmu_resource,
 };
@@ -1564,6 +1591,8 @@ struct platform_device s3c64xx_device_spi1 = {
 void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 						int num_cs)
 {
+	struct s3c64xx_spi_info pd;
+
 	/* Reject invalid configuration */
 	if (!num_cs || src_clk_nr < 0) {
 		pr_err("%s: Invalid SPI configuration\n", __func__);
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a8372a..000000000000
--- a/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
-	void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af5286a3e..000000000000
--- a/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f77c40..000000000000
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD  0
-#define S3C64XX_AC97_GPE  1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN		(1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI		(1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR		(1 << 2)
-#define QUIRK_NEED_RSTCLR	(1 << 3)
-	/* Quirks of the I2S controller */
-	u32 quirks;
-
-	/*
-	 * Array of clock names that can be used to generate I2S signals.
-	 * Also corresponds to clocks of I2SMOD[10]
-	 */
-	const char **src_clk;
-	dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-	union {
-		struct samsung_i2s i2s;
-	} type;
-};
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae18582..000000000000
--- a/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
index bab139201761..d1ecef0e38e0 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
 #include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
new file mode 100644
index 000000000000..331d046ac2c5
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/hdmi.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e4429bc7..000000000000
--- a/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e767a19..000000000000
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d31711944..000000000000
--- a/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect:1;
-	unsigned int	no_detect:1;
-	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
-	unsigned int	use_dma:1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8d4c2e..000000000000
--- a/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115fa93a4..000000000000
--- a/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index ceba18d23a5a..000000000000
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
-	u8 fb_delay;
-	unsigned line;
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- */
-struct s3c64xx_spi_info {
-	int src_clk_nr;
-	int num_cs;
-	int (*cfg_gpio)(void);
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- *				initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22e0fc2..000000000000
--- a/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-	void    (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e2288a509..000000000000
--- a/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
-	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbefc3f2..000000000000
--- a/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 64ab65f0fdbc..15070284343e 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {
diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c
index f9431fe5b06e..23557d30e44c 100644
--- a/arch/arm/plat-samsung/s5p-irq-gpioint.c
+++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c
@@ -24,7 +24,7 @@
 
 #include <asm/mach/irq.h>
 
-#define GPIO_BASE(chip)		(((unsigned long)(chip)->base) & 0xFFFFF000u)
+#define GPIO_BASE(chip)		((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
 
 #define CON_OFFSET		0x700
 #define MASK_OFFSET		0x900
@@ -153,7 +153,7 @@ static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
 	bank->chips[group - bank->start] = chip;
 
 	gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
-				    (void __iomem *)GPIO_BASE(chip),
+				    GPIO_BASE(chip),
 				    handle_level_irq);
 	if (!gc)
 		return -ENOMEM;
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 4dcb11c3d894..60552e22f22e 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -28,7 +28,6 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include <asm/irq.h>
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/plat-spear/include/plat/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h
deleted file mode 100644
index 9248e3a7e333..000000000000
--- a/arch/arm/plat-spear/include/plat/keyboard.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright (C) 2010 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_KEYBOARD_H
-#define __PLAT_KEYBOARD_H
-
-#include <linux/bitops.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/types.h>
-
-#define DECLARE_9x9_KEYMAP(_name) \
-int _name[] = { \
-	KEY(0, 0, KEY_ESC), \
-	KEY(0, 1, KEY_1), \
-	KEY(0, 2, KEY_2), \
-	KEY(0, 3, KEY_3), \
-	KEY(0, 4, KEY_4), \
-	KEY(0, 5, KEY_5), \
-	KEY(0, 6, KEY_6), \
-	KEY(0, 7, KEY_7), \
-	KEY(0, 8, KEY_8), \
-	KEY(1, 0, KEY_9), \
-	KEY(1, 1, KEY_MINUS), \
-	KEY(1, 2, KEY_EQUAL), \
-	KEY(1, 3, KEY_BACKSPACE), \
-	KEY(1, 4, KEY_TAB), \
-	KEY(1, 5, KEY_Q), \
-	KEY(1, 6, KEY_W), \
-	KEY(1, 7, KEY_E), \
-	KEY(1, 8, KEY_R), \
-	KEY(2, 0, KEY_T), \
-	KEY(2, 1, KEY_Y), \
-	KEY(2, 2, KEY_U), \
-	KEY(2, 3, KEY_I), \
-	KEY(2, 4, KEY_O), \
-	KEY(2, 5, KEY_P), \
-	KEY(2, 6, KEY_LEFTBRACE), \
-	KEY(2, 7, KEY_RIGHTBRACE), \
-	KEY(2, 8, KEY_ENTER), \
-	KEY(3, 0, KEY_LEFTCTRL), \
-	KEY(3, 1, KEY_A), \
-	KEY(3, 2, KEY_S), \
-	KEY(3, 3, KEY_D), \
-	KEY(3, 4, KEY_F), \
-	KEY(3, 5, KEY_G), \
-	KEY(3, 6, KEY_H), \
-	KEY(3, 7, KEY_J), \
-	KEY(3, 8, KEY_K), \
-	KEY(4, 0, KEY_L), \
-	KEY(4, 1, KEY_SEMICOLON), \
-	KEY(4, 2, KEY_APOSTROPHE), \
-	KEY(4, 3, KEY_GRAVE), \
-	KEY(4, 4, KEY_LEFTSHIFT), \
-	KEY(4, 5, KEY_BACKSLASH), \
-	KEY(4, 6, KEY_Z), \
-	KEY(4, 7, KEY_X), \
-	KEY(4, 8, KEY_C), \
-	KEY(5, 0, KEY_V), \
-	KEY(5, 1, KEY_B), \
-	KEY(5, 2, KEY_N), \
-	KEY(5, 3, KEY_M), \
-	KEY(5, 4, KEY_COMMA), \
-	KEY(5, 5, KEY_DOT), \
-	KEY(5, 6, KEY_SLASH), \
-	KEY(5, 7, KEY_RIGHTSHIFT), \
-	KEY(5, 8, KEY_KPASTERISK), \
-	KEY(6, 0, KEY_LEFTALT), \
-	KEY(6, 1, KEY_SPACE), \
-	KEY(6, 2, KEY_CAPSLOCK), \
-	KEY(6, 3, KEY_F1), \
-	KEY(6, 4, KEY_F2), \
-	KEY(6, 5, KEY_F3), \
-	KEY(6, 6, KEY_F4), \
-	KEY(6, 7, KEY_F5), \
-	KEY(6, 8, KEY_F6), \
-	KEY(7, 0, KEY_F7), \
-	KEY(7, 1, KEY_F8), \
-	KEY(7, 2, KEY_F9), \
-	KEY(7, 3, KEY_F10), \
-	KEY(7, 4, KEY_NUMLOCK), \
-	KEY(7, 5, KEY_SCROLLLOCK), \
-	KEY(7, 6, KEY_KP7), \
-	KEY(7, 7, KEY_KP8), \
-	KEY(7, 8, KEY_KP9), \
-	KEY(8, 0, KEY_KPMINUS), \
-	KEY(8, 1, KEY_KP4), \
-	KEY(8, 2, KEY_KP5), \
-	KEY(8, 3, KEY_KP6), \
-	KEY(8, 4, KEY_KPPLUS), \
-	KEY(8, 5, KEY_KP1), \
-	KEY(8, 6, KEY_KP2), \
-	KEY(8, 7, KEY_KP3), \
-	KEY(8, 8, KEY_KP0), \
-}
-
-#define DECLARE_6x6_KEYMAP(_name) \
-int _name[] = { \
-	KEY(0, 0, KEY_RESERVED), \
-	KEY(0, 1, KEY_1), \
-	KEY(0, 2, KEY_2), \
-	KEY(0, 3, KEY_3), \
-	KEY(0, 4, KEY_4), \
-	KEY(0, 5, KEY_5), \
-	KEY(1, 0, KEY_Q), \
-	KEY(1, 1, KEY_W), \
-	KEY(1, 2, KEY_E), \
-	KEY(1, 3, KEY_R), \
-	KEY(1, 4, KEY_T), \
-	KEY(1, 5, KEY_Y), \
-	KEY(2, 0, KEY_D), \
-	KEY(2, 1, KEY_F), \
-	KEY(2, 2, KEY_G), \
-	KEY(2, 3, KEY_H), \
-	KEY(2, 4, KEY_J), \
-	KEY(2, 5, KEY_K), \
-	KEY(3, 0, KEY_B), \
-	KEY(3, 1, KEY_N), \
-	KEY(3, 2, KEY_M), \
-	KEY(3, 3, KEY_COMMA), \
-	KEY(3, 4, KEY_DOT), \
-	KEY(3, 5, KEY_SLASH), \
-	KEY(4, 0, KEY_F6), \
-	KEY(4, 1, KEY_F7), \
-	KEY(4, 2, KEY_F8), \
-	KEY(4, 3, KEY_F9), \
-	KEY(4, 4, KEY_F10), \
-	KEY(4, 5, KEY_NUMLOCK), \
-	KEY(5, 0, KEY_KP2), \
-	KEY(5, 1, KEY_KP3), \
-	KEY(5, 2, KEY_KP0), \
-	KEY(5, 3, KEY_KPDOT), \
-	KEY(5, 4, KEY_RO), \
-	KEY(5, 5, KEY_ZENKAKUHANKAKU), \
-}
-
-#define KEYPAD_9x9     0
-#define KEYPAD_6x6     1
-#define KEYPAD_2x2     2
-
-/**
- * struct kbd_platform_data - spear keyboard platform data
- * keymap: pointer to keymap data (table and size)
- * rep: enables key autorepeat
- * mode: choose keyboard support(9x9, 6x6, 2x2)
- * suspended_rate: rate at which keyboard would operate in suspended mode
- *
- * This structure is supposed to be used by platform code to supply
- * keymaps to drivers that implement keyboards.
- */
-struct kbd_platform_data {
-	const struct matrix_keymap_data *keymap;
-	bool rep;
-	unsigned int mode;
-	unsigned int suspended_rate;
-};
-
-#endif /* __PLAT_KEYBOARD_H */
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 8d5c10a5084d..2a4ae8a6a081 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -16,8 +16,10 @@ config PLAT_VERSATILE_FPGA_IRQ_NR
        depends on PLAT_VERSATILE_FPGA_IRQ
 
 config PLAT_VERSATILE_LEDS
-	def_bool y if LEDS_CLASS
+	def_bool y if NEW_LEDS
 	depends on ARCH_REALVIEW || ARCH_VERSATILE
+	select LEDS_CLASS
+	select LEDS_TRIGGER
 
 config PLAT_VERSATILE_SCHED_CLOCK
 	def_bool y
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 272769a8a7d6..74cfd94cbf80 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
 obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
 obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
 obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c
index 6e70d03824a1..091ae1030045 100644
--- a/arch/arm/plat-versatile/fpga-irq.c
+++ b/arch/arm/plat-versatile/fpga-irq.c
@@ -5,6 +5,8 @@
 #include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
@@ -14,11 +16,17 @@
 #define IRQ_RAW_STATUS		0x04
 #define IRQ_ENABLE_SET		0x08
 #define IRQ_ENABLE_CLEAR	0x0c
+#define INT_SOFT_SET		0x10
+#define INT_SOFT_CLEAR		0x14
+#define FIQ_STATUS		0x20
+#define FIQ_RAW_STATUS		0x24
+#define FIQ_ENABLE		0x28
+#define FIQ_ENABLE_SET		0x28
+#define FIQ_ENABLE_CLEAR	0x2C
 
 /**
  * struct fpga_irq_data - irq data container for the FPGA IRQ controller
  * @base: memory offset in virtual memory
- * @irq_start: first IRQ number handled by this instance
  * @chip: chip container for this instance
  * @domain: IRQ domain for this instance
  * @valid: mask for valid IRQs on this controller
@@ -26,7 +34,6 @@
  */
 struct fpga_irq_data {
 	void __iomem *base;
-	unsigned int irq_start;
 	struct irq_chip chip;
 	u32 valid;
 	struct irq_domain *domain;
@@ -125,34 +132,79 @@ static struct irq_domain_ops fpga_irqdomain_ops = {
 	.xlate = irq_domain_xlate_onetwocell,
 };
 
-void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
-			  int parent_irq, u32 valid, struct device_node *node)
-{
+static __init struct fpga_irq_data *
+fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) {
 	struct fpga_irq_data *f;
 
 	if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) {
 		printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__);
-		return;
+		return NULL;
 	}
-
 	f = &fpga_irq_devices[fpga_irq_id];
 	f->base = base;
-	f->irq_start = irq_start;
 	f->chip.name = name;
 	f->chip.irq_ack = fpga_irq_mask;
 	f->chip.irq_mask = fpga_irq_mask;
 	f->chip.irq_unmask = fpga_irq_unmask;
 	f->valid = valid;
+	fpga_irq_id++;
+
+	return f;
+}
+
+void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
+			  int parent_irq, u32 valid, struct device_node *node)
+{
+	struct fpga_irq_data *f;
+
+	f = fpga_irq_prep_struct(base, name, valid);
+	if (!f)
+		return;
 
 	if (parent_irq != -1) {
 		irq_set_handler_data(parent_irq, f);
 		irq_set_chained_handler(parent_irq, fpga_irq_handle);
 	}
 
-	f->domain = irq_domain_add_legacy(node, fls(valid), f->irq_start, 0,
+	f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0,
 					  &fpga_irqdomain_ops, f);
 	pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
 		fpga_irq_id, name, base, f->used_irqs);
+}
 
-	fpga_irq_id++;
+#ifdef CONFIG_OF
+int __init fpga_irq_of_init(struct device_node *node,
+			    struct device_node *parent)
+{
+	struct fpga_irq_data *f;
+	void __iomem *base;
+	u32 clear_mask;
+	u32 valid_mask;
+
+	if (WARN_ON(!node))
+		return -ENODEV;
+
+	base = of_iomap(node, 0);
+	WARN(!base, "unable to map fpga irq registers\n");
+
+	if (of_property_read_u32(node, "clear-mask", &clear_mask))
+		clear_mask = 0;
+
+	if (of_property_read_u32(node, "valid-mask", &valid_mask))
+		valid_mask = 0;
+
+	f = fpga_irq_prep_struct(base, node->name, valid_mask);
+	if (!f)
+		return -ENOMEM;
+
+	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
+	writel(clear_mask, base + FIQ_ENABLE_CLEAR);
+
+	f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f);
+	f->used_irqs = hweight32(valid_mask);
+
+	pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
+		fpga_irq_id, node->name, base, f->used_irqs);
+	return 0;
 }
+#endif
diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h
index 91bcfb67551d..1fac9651d3ca 100644
--- a/arch/arm/plat-versatile/include/plat/fpga-irq.h
+++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h
@@ -7,5 +7,7 @@ struct pt_regs;
 void fpga_handle_irq(struct pt_regs *regs);
 void fpga_irq_init(void __iomem *, const char *, int, int, u32,
 		struct device_node *node);
+int fpga_irq_of_init(struct device_node *node,
+		     struct device_node *parent);
 
 #endif
diff --git a/arch/arm/plat-versatile/include/plat/platsmp.h b/arch/arm/plat-versatile/include/plat/platsmp.h
new file mode 100644
index 000000000000..50fb830192e0
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/platsmp.h
@@ -0,0 +1,14 @@
+/*
+ *  linux/arch/arm/plat-versatile/include/plat/platsmp.h
+ *
+ *  Copyright (C) 2011 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void versatile_secondary_startup(void);
+extern void versatile_secondary_init(unsigned int cpu);
+extern int  versatile_boot_secondary(unsigned int cpu, struct task_struct *idle);
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
index 3169fa555ea6..d2490d00b46c 100644
--- a/arch/arm/plat-versatile/leds.c
+++ b/arch/arm/plat-versatile/leds.c
@@ -37,10 +37,10 @@ static const struct {
 } versatile_leds[] = {
 	{ "versatile:0", "heartbeat", },
 	{ "versatile:1", "mmc0", },
-	{ "versatile:2", },
-	{ "versatile:3", },
-	{ "versatile:4", },
-	{ "versatile:5", },
+	{ "versatile:2", "cpu0" },
+	{ "versatile:3", "cpu1" },
+	{ "versatile:4", "cpu2" },
+	{ "versatile:5", "cpu3" },
 	{ "versatile:6", },
 	{ "versatile:7", },
 };
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index d7c5c171f5aa..04ca4937d8ca 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -20,12 +20,6 @@
 #include <asm/hardware/gic.h>
 
 /*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
-/*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
@@ -40,7 +34,7 @@ static void __cpuinit write_pen_release(int val)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void __cpuinit versatile_secondary_init(unsigned int cpu)
 {
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -62,7 +56,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 2997e56ce0dd..831e1fdfdb2f 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -66,7 +66,6 @@ iq80321			ARCH_IQ80321		IQ80321			169
 ks8695			ARCH_KS8695		KS8695			180
 karo			ARCH_KARO		KARO			190
 smdk2410		ARCH_SMDK2410		SMDK2410		193
-ceiva			ARCH_CEIVA		CEIVA			200
 voiceblue		MACH_VOICEBLUE		VOICEBLUE		218
 h5400			ARCH_H5400		H5400			220
 omap_innovator		MACH_OMAP_INNOVATOR	OMAP_INNOVATOR		234
@@ -158,7 +157,6 @@ edb9315a		MACH_EDB9315A		EDB9315A		772
 stargate2		MACH_STARGATE2		STARGATE2		774
 intelmote2		MACH_INTELMOTE2		INTELMOTE2		775
 trizeps4		MACH_TRIZEPS4		TRIZEPS4		776
-pnx4008			MACH_PNX4008		PNX4008			782
 cpuat91			MACH_CPUAT91		CPUAT91			787
 iq81340sc		MACH_IQ81340SC		IQ81340SC		799
 iq81340mc		MACH_IQ81340MC		IQ81340MC		801
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index fb849d044bde..c834b32af275 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -719,8 +719,10 @@ static int __init vfp_init(void)
 			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
 				elf_hwcap |= HWCAP_NEON;
 #endif
+#ifdef CONFIG_VFPv3
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+#endif
 		}
 	}
 	return 0;
diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile
new file mode 100644
index 000000000000..43841033afd3
--- /dev/null
+++ b/arch/arm/xen/Makefile
@@ -0,0 +1 @@
+obj-y		:= enlighten.o hypercall.o grant-table.o
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
new file mode 100644
index 000000000000..59bcb96ac369
--- /dev/null
+++ b/arch/arm/xen/enlighten.c
@@ -0,0 +1,168 @@
+#include <xen/xen.h>
+#include <xen/events.h>
+#include <xen/grant_table.h>
+#include <xen/hvm.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/interface/hvm/params.h>
+#include <xen/features.h>
+#include <xen/platform_pci.h>
+#include <xen/xenbus.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/hypercall.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+struct start_info _xen_start_info;
+struct start_info *xen_start_info = &_xen_start_info;
+EXPORT_SYMBOL_GPL(xen_start_info);
+
+enum xen_domain_type xen_domain_type = XEN_NATIVE;
+EXPORT_SYMBOL_GPL(xen_domain_type);
+
+struct shared_info xen_dummy_shared_info;
+struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
+
+DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
+
+/* TODO: to be removed */
+__read_mostly int xen_have_vector_callback;
+EXPORT_SYMBOL_GPL(xen_have_vector_callback);
+
+int xen_platform_pci_unplug = XEN_UNPLUG_ALL;
+EXPORT_SYMBOL_GPL(xen_platform_pci_unplug);
+
+static __read_mostly int xen_events_irq = -1;
+
+int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
+			       unsigned long addr,
+			       unsigned long mfn, int nr,
+			       pgprot_t prot, unsigned domid)
+{
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_range);
+
+/*
+ * see Documentation/devicetree/bindings/arm/xen.txt for the
+ * documentation of the Xen Device Tree format.
+ */
+#define GRANT_TABLE_PHYSADDR 0
+static int __init xen_guest_init(void)
+{
+	struct xen_add_to_physmap xatp;
+	static struct shared_info *shared_info_page = 0;
+	struct device_node *node;
+	int len;
+	const char *s = NULL;
+	const char *version = NULL;
+	const char *xen_prefix = "xen,xen-";
+	struct resource res;
+
+	node = of_find_compatible_node(NULL, NULL, "xen,xen");
+	if (!node) {
+		pr_debug("No Xen support\n");
+		return 0;
+	}
+	s = of_get_property(node, "compatible", &len);
+	if (strlen(xen_prefix) + 3  < len &&
+			!strncmp(xen_prefix, s, strlen(xen_prefix)))
+		version = s + strlen(xen_prefix);
+	if (version == NULL) {
+		pr_debug("Xen version not found\n");
+		return 0;
+	}
+	if (of_address_to_resource(node, GRANT_TABLE_PHYSADDR, &res))
+		return 0;
+	xen_hvm_resume_frames = res.start >> PAGE_SHIFT;
+	xen_events_irq = irq_of_parse_and_map(node, 0);
+	pr_info("Xen %s support found, events_irq=%d gnttab_frame_pfn=%lx\n",
+			version, xen_events_irq, xen_hvm_resume_frames);
+	xen_domain_type = XEN_HVM_DOMAIN;
+
+	xen_setup_features();
+	if (xen_feature(XENFEAT_dom0))
+		xen_start_info->flags |= SIF_INITDOMAIN|SIF_PRIVILEGED;
+	else
+		xen_start_info->flags &= ~(SIF_INITDOMAIN|SIF_PRIVILEGED);
+
+	if (!shared_info_page)
+		shared_info_page = (struct shared_info *)
+			get_zeroed_page(GFP_KERNEL);
+	if (!shared_info_page) {
+		pr_err("not enough memory\n");
+		return -ENOMEM;
+	}
+	xatp.domid = DOMID_SELF;
+	xatp.idx = 0;
+	xatp.space = XENMAPSPACE_shared_info;
+	xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
+	if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
+		BUG();
+
+	HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
+
+	/* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
+	 * page, we use it in the event channel upcall and in some pvclock
+	 * related functions. We don't need the vcpu_info placement
+	 * optimizations because we don't use any pv_mmu or pv_irq op on
+	 * HVM.
+	 * The shared info contains exactly 1 CPU (the boot CPU). The guest
+	 * is required to use VCPUOP_register_vcpu_info to place vcpu info
+	 * for secondary CPUs as they are brought up. */
+	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
+
+	gnttab_init();
+	if (!xen_initial_domain())
+		xenbus_probe(NULL);
+
+	return 0;
+}
+core_initcall(xen_guest_init);
+
+static irqreturn_t xen_arm_callback(int irq, void *arg)
+{
+	xen_hvm_evtchn_do_upcall();
+	return IRQ_HANDLED;
+}
+
+static int __init xen_init_events(void)
+{
+	if (!xen_domain() || xen_events_irq < 0)
+		return -ENODEV;
+
+	xen_init_IRQ();
+
+	if (request_percpu_irq(xen_events_irq, xen_arm_callback,
+			"events", xen_vcpu)) {
+		pr_err("Error requesting IRQ %d\n", xen_events_irq);
+		return -EINVAL;
+	}
+
+	enable_percpu_irq(xen_events_irq, 0);
+
+	return 0;
+}
+postcore_initcall(xen_init_events);
+
+/* XXX: only until balloon is properly working */
+int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem)
+{
+	*pages = alloc_pages(highmem ? GFP_HIGHUSER : GFP_KERNEL,
+			get_order(nr_pages));
+	if (*pages == NULL)
+		return -ENOMEM;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(alloc_xenballooned_pages);
+
+void free_xenballooned_pages(int nr_pages, struct page **pages)
+{
+	kfree(*pages);
+	*pages = NULL;
+}
+EXPORT_SYMBOL_GPL(free_xenballooned_pages);
diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c
new file mode 100644
index 000000000000..dbd1330c0196
--- /dev/null
+++ b/arch/arm/xen/grant-table.c
@@ -0,0 +1,53 @@
+/******************************************************************************
+ * grant_table.c
+ * ARM specific part
+ *
+ * Granting foreign access to our memory reservation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <xen/interface/xen.h>
+#include <xen/page.h>
+#include <xen/grant_table.h>
+
+int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+			   unsigned long max_nr_gframes,
+			   void **__shared)
+{
+	return -ENOSYS;
+}
+
+void arch_gnttab_unmap(void *shared, unsigned long nr_gframes)
+{
+	return;
+}
+
+int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
+			   unsigned long max_nr_gframes,
+			   grant_status_t **__shared)
+{
+	return -ENOSYS;
+}
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
new file mode 100644
index 000000000000..074f5ed101b9
--- /dev/null
+++ b/arch/arm/xen/hypercall.S
@@ -0,0 +1,106 @@
+/******************************************************************************
+ * hypercall.S
+ *
+ * Xen hypercall wrappers
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+/*
+ * The Xen hypercall calling convention is very similar to the ARM
+ * procedure calling convention: the first paramter is passed in r0, the
+ * second in r1, the third in r2 and the fourth in r3. Considering that
+ * Xen hypercalls have 5 arguments at most, the fifth paramter is passed
+ * in r4, differently from the procedure calling convention of using the
+ * stack for that case.
+ *
+ * The hypercall number is passed in r12.
+ *
+ * The return value is in r0.
+ *
+ * The hvc ISS is required to be 0xEA1, that is the Xen specific ARM
+ * hypercall tag.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <xen/interface/xen.h>
+
+
+/* HVC 0xEA1 */
+#ifdef CONFIG_THUMB2_KERNEL
+#define xen_hvc .word 0xf7e08ea1
+#else
+#define xen_hvc .word 0xe140ea71
+#endif
+
+#define HYPERCALL_SIMPLE(hypercall)		\
+ENTRY(HYPERVISOR_##hypercall)			\
+	mov r12, #__HYPERVISOR_##hypercall;	\
+	xen_hvc;							\
+	mov pc, lr;							\
+ENDPROC(HYPERVISOR_##hypercall)
+
+#define HYPERCALL0 HYPERCALL_SIMPLE
+#define HYPERCALL1 HYPERCALL_SIMPLE
+#define HYPERCALL2 HYPERCALL_SIMPLE
+#define HYPERCALL3 HYPERCALL_SIMPLE
+#define HYPERCALL4 HYPERCALL_SIMPLE
+
+#define HYPERCALL5(hypercall)			\
+ENTRY(HYPERVISOR_##hypercall)			\
+	stmdb sp!, {r4}						\
+	ldr r4, [sp, #4]					\
+	mov r12, #__HYPERVISOR_##hypercall;	\
+	xen_hvc								\
+	ldm sp!, {r4}						\
+	mov pc, lr							\
+ENDPROC(HYPERVISOR_##hypercall)
+
+                .text
+
+HYPERCALL2(xen_version);
+HYPERCALL3(console_io);
+HYPERCALL3(grant_table_op);
+HYPERCALL2(sched_op);
+HYPERCALL2(event_channel_op);
+HYPERCALL2(hvm_op);
+HYPERCALL2(memory_op);
+HYPERCALL2(physdev_op);
+
+ENTRY(privcmd_call)
+	stmdb sp!, {r4}
+	mov r12, r0
+	mov r0, r1
+	mov r1, r2
+	mov r2, r3
+	ldr r3, [sp, #8]
+	ldr r4, [sp, #4]
+	xen_hvc
+	ldm sp!, {r4}
+	mov pc, lr
+ENDPROC(privcmd_call);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
new file mode 100644
index 000000000000..767ba5685454
--- /dev/null
+++ b/arch/arm64/Kconfig
@@ -0,0 +1,222 @@
+config ARM64
+	def_bool y
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_HARDIRQS_NO_DEPRECATED
+	select GENERIC_IOMAP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_TIME_VSYSCALL
+	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IRQ_WORK
+	select HAVE_MEMBLOCK
+	select HAVE_PERF_EVENTS
+	select HAVE_SPARSE_IRQ
+	select IRQ_DOMAIN
+	select NO_BOOTMEM
+	select OF
+	select OF_EARLY_FLATTREE
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SPARSE_IRQ
+	help
+	  ARM 64-bit (AArch64) Linux support.
+
+config 64BIT
+	def_bool y
+
+config ARCH_PHYS_ADDR_T_64BIT
+	def_bool y
+
+config MMU
+	def_bool y
+
+config NO_IOPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CSUM
+        def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config ZONE_DMA32
+	def_bool y
+
+config ARCH_DMA_ADDR_T_64BIT
+	def_bool y
+
+config NEED_DMA_MAP_STATE
+	def_bool y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config SWIOTLB
+	def_bool y
+
+config IOMMU_HELPER
+	def_bool SWIOTLB
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System Type"
+
+endmenu
+
+menu "Bus support"
+
+config ARM_AMBA
+	bool
+
+endmenu
+
+menu "Kernel Features"
+
+source "kernel/time/Kconfig"
+
+config ARM64_64K_PAGES
+	bool "Enable 64KB pages support"
+	help
+	  This feature enables 64KB pages support (4KB by default)
+	  allowing only two levels of page tables and faster TLB
+	  look-up. AArch32 emulation is not available when this feature
+	  is enabled.
+
+config SMP
+	bool "Symmetric Multi-Processing"
+	select USE_GENERIC_SMP_HELPERS
+	help
+	  This enables support for systems with more than one CPU.  If
+	  you say N here, the kernel will run on single and
+	  multiprocessor machines, but will use only one CPU of a
+	  multiprocessor machine. If you say Y here, the kernel will run
+	  on many, but not all, single processor machines. On a single
+	  processor machine, the kernel will run faster if you say N
+	  here.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "4"
+
+source kernel/Kconfig.preempt
+
+config HZ
+	int
+	default 100
+
+config ARCH_HAS_HOLES_MEMORYMODEL
+	def_bool y if SPARSEMEM
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config HAVE_ARCH_PFN_VALID
+	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
+config HW_PERF_EVENTS
+	bool "Enable hardware performance counter support for perf events"
+	depends on PERF_EVENTS
+	default y
+	help
+	  Enable hardware performance counter support for perf events. If
+	  disabled, perf events will use software events only.
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Boot options"
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  Provide a set of default command-line options at build time by
+	  entering them here. As a minimum, you should specify the the
+	  root device (e.g. root=/dev/nfs).
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+config COMPAT
+	bool "Kernel support for 32-bit EL0"
+	depends on !ARM64_64K_PAGES
+	select COMPAT_BINFMT_ELF
+	help
+	  This option enables support for a 32-bit EL0 running under a 64-bit
+	  kernel at EL1. AArch32-specific components such as system calls,
+	  the user helper functions, VFP support and the ptrace interface are
+	  handled appropriately by the kernel.
+
+	  If you want to execute 32-bit userspace applications, say Y.
+
+config SYSVIPC_COMPAT
+	def_bool y
+	depends on COMPAT && SYSVIPC
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/arm64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
new file mode 100644
index 000000000000..d7553f2bda66
--- /dev/null
+++ b/arch/arm64/Kconfig.debug
@@ -0,0 +1,27 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config FRAME_POINTER
+	bool
+	default y
+
+config DEBUG_ERRORS
+	bool "Verbose kernel error messages"
+	depends on DEBUG_KERNEL
+	help
+	  This option controls verbose debugging information which can be
+	  printed when the kernel detects an internal error. This debugging
+	  information is useful to kernel hackers when tracking down problems,
+	  but mostly meaningless to other people. It's safe to say Y unless
+	  you are concerned with the code size or don't want to see these
+	  messages.
+
+config DEBUG_STACK_USAGE
+	bool "Enable stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T output.
+
+endmenu
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
new file mode 100644
index 000000000000..364191f3be43
--- /dev/null
+++ b/arch/arm64/Makefile
@@ -0,0 +1,71 @@
+#
+# arch/arm64/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2001 by Russell King
+
+LDFLAGS_vmlinux	:=-p --no-undefined -X
+CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+GZFLAGS		:=-9
+
+LIBGCC 		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+KBUILD_DEFCONFIG := defconfig
+
+KBUILD_CFLAGS	+= -mgeneral-regs-only
+KBUILD_CPPFLAGS	+= -mlittle-endian
+AS		+= -EL
+LD		+= -EL
+
+comma = ,
+
+CHECKFLAGS	+= -D__aarch64__
+
+# Default value
+head-y		:= arch/arm64/kernel/head.o
+
+# The byte offset of the kernel image in RAM from the start of RAM.
+TEXT_OFFSET := 0x00080000
+
+export	TEXT_OFFSET GZFLAGS
+
+core-y		+= arch/arm64/kernel/ arch/arm64/mm/
+libs-y		:= arch/arm64/lib/ $(libs-y)
+libs-y		+= $(LIBGCC)
+
+# Default target when executing plain make
+KBUILD_IMAGE := Image.gz
+
+all:	$(KBUILD_IMAGE)
+
+boot := arch/arm64/boot
+
+Image Image.gz: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+
+zinstall install: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+
+%.dtb:
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+
+# We use MRPROPER_FILES and CLEAN_FILES now
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+  echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
+  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+  echo  '  install       - Install uncompressed kernel'
+  echo  '  zinstall      - Install compressed kernel'
+  echo  '                  Install using (your) ~/bin/installkernel or'
+  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  install to $$(INSTALL_PATH) and run lilo'
+endef
diff --git a/arch/arm64/boot/.gitignore b/arch/arm64/boot/.gitignore
new file mode 100644
index 000000000000..8dab0bb6ae66
--- /dev/null
+++ b/arch/arm64/boot/.gitignore
@@ -0,0 +1,2 @@
+Image
+Image.gz
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
new file mode 100644
index 000000000000..eca209b2b0bf
--- /dev/null
+++ b/arch/arm64/boot/Makefile
@@ -0,0 +1,36 @@
+#
+# arch/arm64/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2012, ARM Ltd.
+# Author: Will Deacon <will.deacon@arm.com>
+#
+# Based on the ia64 boot/Makefile.
+#
+
+targets := Image Image.gz
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/%.dtb: $(src)/dts/%.dts
+	$(call cmd,dtc)
+
+install: $(obj)/Image
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image System.map "$(INSTALL_PATH)"
+
+zinstall: $(obj)/Image.gz
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image.gz System.map "$(INSTALL_PATH)"
+
+clean-files += *.dtb
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
new file mode 100644
index 000000000000..12ed78aa6f0c
--- /dev/null
+++ b/arch/arm64/boot/install.sh
@@ -0,0 +1,46 @@
+#!/bin/sh
+#
+# arch/arm64/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the AArch64 Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+
+if [ "$(basename $2)" = "Image.gz" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
new file mode 100644
index 000000000000..9212c7880da7
--- /dev/null
+++ b/arch/arm64/configs/defconfig
@@ -0,0 +1,85 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_SMP=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_CMDLINE="console=ttyAMA0"
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_COMPAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_BLK_DEV is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
new file mode 100644
index 000000000000..35924a542d43
--- /dev/null
+++ b/arch/arm64/include/asm/Kbuild
@@ -0,0 +1,51 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += hwcap.h
+
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += checksum.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += dma.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += ftrace.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += linkage.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += mutex.h
+generic-y += pci.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += string.h
+generic-y += switch_to.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += types.h
+generic-y += unaligned.h
+generic-y += user.h
diff --git a/arch/arm64/include/asm/arm_generic.h b/arch/arm64/include/asm/arm_generic.h
new file mode 100644
index 000000000000..e4cec9d30f27
--- /dev/null
+++ b/arch/arm64/include/asm/arm_generic.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm64/include/asm/arm_generic.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_ARM_GENERIC_H
+#define __ASM_ARM_GENERIC_H
+
+#include <linux/clocksource.h>
+
+#define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+#define ARCH_TIMER_CTRL_IMASK		(1 << 1)
+#define ARCH_TIMER_CTRL_ISTATUS		(1 << 2)
+
+#define ARCH_TIMER_REG_CTRL		0
+#define ARCH_TIMER_REG_FREQ		1
+#define ARCH_TIMER_REG_TVAL		2
+
+static inline void arch_timer_reg_write(int reg, u32 val)
+{
+	switch (reg) {
+	case ARCH_TIMER_REG_CTRL:
+		asm volatile("msr cntp_ctl_el0,  %0" : : "r" (val));
+		break;
+	case ARCH_TIMER_REG_TVAL:
+		asm volatile("msr cntp_tval_el0, %0" : : "r" (val));
+		break;
+	default:
+		BUILD_BUG();
+	}
+
+	isb();
+}
+
+static inline u32 arch_timer_reg_read(int reg)
+{
+	u32 val;
+
+	switch (reg) {
+	case ARCH_TIMER_REG_CTRL:
+		asm volatile("mrs %0,  cntp_ctl_el0" : "=r" (val));
+		break;
+	case ARCH_TIMER_REG_FREQ:
+		asm volatile("mrs %0,   cntfrq_el0" : "=r" (val));
+		break;
+	case ARCH_TIMER_REG_TVAL:
+		asm volatile("mrs %0, cntp_tval_el0" : "=r" (val));
+		break;
+	default:
+		BUILD_BUG();
+	}
+
+	return val;
+}
+
+static inline void __cpuinit arch_counter_enable_user_access(void)
+{
+	u32 cntkctl;
+
+	/* Disable user access to the timers and the virtual counter. */
+	asm volatile("mrs	%0, cntkctl_el1" : "=r" (cntkctl));
+	cntkctl &= ~((3 << 8) | (1 << 1));
+
+	/* Enable user access to the physical counter and frequency. */
+	cntkctl |= 1;
+	asm volatile("msr	cntkctl_el1, %0" : : "r" (cntkctl));
+}
+
+static inline cycle_t arch_counter_get_cntpct(void)
+{
+	cycle_t cval;
+
+	asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
+
+	return cval;
+}
+
+static inline cycle_t arch_counter_get_cntvct(void)
+{
+	cycle_t cval;
+
+	asm volatile("mrs %0, cntvct_el0" : "=r" (cval));
+
+	return cval;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/asm-offsets.h b/arch/arm64/include/asm/asm-offsets.h
new file mode 100644
index 000000000000..d370ee36a182
--- /dev/null
+++ b/arch/arm64/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
new file mode 100644
index 000000000000..da2a13e8f1e6
--- /dev/null
+++ b/arch/arm64/include/asm/assembler.h
@@ -0,0 +1,109 @@
+/*
+ * Based on arch/arm/include/asm/assembler.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Stack pushing/popping (register pairs only). Equivalent to store decrement
+ * before, load increment after.
+ */
+	.macro	push, xreg1, xreg2
+	stp	\xreg1, \xreg2, [sp, #-16]!
+	.endm
+
+	.macro	pop, xreg1, xreg2
+	ldp	\xreg1, \xreg2, [sp], #16
+	.endm
+
+/*
+ * Enable and disable interrupts.
+ */
+	.macro	disable_irq
+	msr	daifset, #2
+	.endm
+
+	.macro	enable_irq
+	msr	daifclr, #2
+	.endm
+
+/*
+ * Save/disable and restore interrupts.
+ */
+	.macro	save_and_disable_irqs, olddaif
+	mrs	\olddaif, daif
+	disable_irq
+	.endm
+
+	.macro	restore_irqs, olddaif
+	msr	daif, \olddaif
+	.endm
+
+/*
+ * Enable and disable debug exceptions.
+ */
+	.macro	disable_dbg
+	msr	daifset, #8
+	.endm
+
+	.macro	enable_dbg
+	msr	daifclr, #8
+	.endm
+
+	.macro	disable_step, tmp
+	mrs	\tmp, mdscr_el1
+	bic	\tmp, \tmp, #1
+	msr	mdscr_el1, \tmp
+	.endm
+
+	.macro	enable_step, tmp
+	mrs	\tmp, mdscr_el1
+	orr	\tmp, \tmp, #1
+	msr	mdscr_el1, \tmp
+	.endm
+
+	.macro	enable_dbg_if_not_stepping, tmp
+	mrs	\tmp, mdscr_el1
+	tbnz	\tmp, #1, 9990f
+	enable_dbg
+9990:
+	.endm
+
+/*
+ * SMP data memory barrier
+ */
+	.macro	smp_dmb, opt
+#ifdef CONFIG_SMP
+	dmb	\opt
+#endif
+	.endm
+
+#define USER(l, x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.quad	9999b,l;			\
+	.previous
+
+/*
+ * Register aliases.
+ */
+lr	.req	x30		// link register
diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h
new file mode 100644
index 000000000000..407717ba060e
--- /dev/null
+++ b/arch/arm64/include/asm/atomic.h
@@ -0,0 +1,305 @@
+/*
+ * Based on arch/arm/include/asm/atomic.h
+ *
+ * Copyright (C) 1996 Russell King.
+ * Copyright (C) 2002 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_ATOMIC_H
+#define __ASM_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+/*
+ * AArch64 UP and SMP safe atomic ops.  We use load exclusive and
+ * store exclusive to ensure that these are atomic.  We may loop
+ * to ensure that the update happens.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	asm volatile("// atomic_add\n"
+"1:	ldxr	%w0, [%3]\n"
+"	add	%w0, %w0, %w4\n"
+"	stxr	%w1, %w0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	asm volatile("// atomic_add_return\n"
+"1:	ldaxr	%w0, [%3]\n"
+"	add	%w0, %w0, %w4\n"
+"	stlxr	%w1, %w0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	asm volatile("// atomic_sub\n"
+"1:	ldxr	%w0, [%3]\n"
+"	sub	%w0, %w0, %w4\n"
+"	stxr	%w1, %w0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	asm volatile("// atomic_sub_return\n"
+"1:	ldaxr	%w0, [%3]\n"
+"	sub	%w0, %w0, %w4\n"
+"	stlxr	%w1, %w0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
+{
+	unsigned long tmp;
+	int oldval;
+
+	asm volatile("// atomic_cmpxchg\n"
+"1:	ldaxr	%w1, [%3]\n"
+"	cmp	%w1, %w4\n"
+"	b.ne	2f\n"
+"	stlxr	%w0, %w5, [%3]\n"
+"	cbnz	%w0, 1b\n"
+"2:"
+	: "=&r" (tmp), "=&r" (oldval), "+o" (ptr->counter)
+	: "r" (&ptr->counter), "Ir" (old), "r" (new)
+	: "cc");
+
+	return oldval;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long tmp, tmp2;
+
+	asm volatile("// atomic_clear_mask\n"
+"1:	ldxr	%0, [%3]\n"
+"	bic	%0, %0, %4\n"
+"	stxr	%w1, %0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (tmp), "=&r" (tmp2), "+o" (*addr)
+	: "r" (addr), "Ir" (mask)
+	: "cc");
+}
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+
+	c = atomic_read(v);
+	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+		c = old;
+	return c;
+}
+
+#define atomic_inc(v)		atomic_add(1, v)
+#define atomic_dec(v)		atomic_sub(1, v)
+
+#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)    (atomic_add_return(1, v))
+#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+/*
+ * 64-bit atomic operations.
+ */
+#define ATOMIC64_INIT(i) { (i) }
+
+#define atomic64_read(v)	(*(volatile long long *)&(v)->counter)
+#define atomic64_set(v,i)	(((v)->counter) = (i))
+
+static inline void atomic64_add(u64 i, atomic64_t *v)
+{
+	long result;
+	unsigned long tmp;
+
+	asm volatile("// atomic64_add\n"
+"1:	ldxr	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	stxr	%w1, %0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
+static inline long atomic64_add_return(long i, atomic64_t *v)
+{
+	long result;
+	unsigned long tmp;
+
+	asm volatile("// atomic64_add_return\n"
+"1:	ldaxr	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	stlxr	%w1, %0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline void atomic64_sub(u64 i, atomic64_t *v)
+{
+	long result;
+	unsigned long tmp;
+
+	asm volatile("// atomic64_sub\n"
+"1:	ldxr	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	stxr	%w1, %0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
+static inline long atomic64_sub_return(long i, atomic64_t *v)
+{
+	long result;
+	unsigned long tmp;
+
+	asm volatile("// atomic64_sub_return\n"
+"1:	ldaxr	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	stlxr	%w1, %0, [%3]\n"
+"	cbnz	%w1, 1b"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline long atomic64_cmpxchg(atomic64_t *ptr, long old, long new)
+{
+	long oldval;
+	unsigned long res;
+
+	asm volatile("// atomic64_cmpxchg\n"
+"1:	ldaxr	%1, [%3]\n"
+"	cmp	%1, %4\n"
+"	b.ne	2f\n"
+"	stlxr	%w0, %5, [%3]\n"
+"	cbnz	%w0, 1b\n"
+"2:"
+	: "=&r" (res), "=&r" (oldval), "+o" (ptr->counter)
+	: "r" (&ptr->counter), "Ir" (old), "r" (new)
+	: "cc");
+
+	return oldval;
+}
+
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long result;
+	unsigned long tmp;
+
+	asm volatile("// atomic64_dec_if_positive\n"
+"1:	ldaxr	%0, [%3]\n"
+"	subs	%0, %0, #1\n"
+"	b.mi	2f\n"
+"	stlxr	%w1, %0, [%3]\n"
+"	cbnz	%w1, 1b\n"
+"2:"
+	: "=&r" (result), "=&r" (tmp), "+o" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+
+	c = atomic64_read(v);
+	while (c != u && (old = atomic64_cmpxchg((v), c, c + a)) != c)
+		c = old;
+
+	return c != u;
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v)	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1LL, 0LL)
+
+#endif
+#endif
diff --git a/arch/arm/mach-socfpga/include/mach/timex.h b/arch/arm64/include/asm/auxvec.h
index 43df4354e461..22d6d8885854 100644
--- a/arch/arm/mach-socfpga/include/mach/timex.h
+++ b/arch/arm64/include/asm/auxvec.h
@@ -1,10 +1,9 @@
 /*
- *  Copyright (C) 2003 ARM Limited
+ * Copyright (C) 2012 ARM Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -12,8 +11,12 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#ifndef __ASM_AUXVEC_H
+#define __ASM_AUXVEC_H
 
-#define CLOCK_TICK_RATE		(50000000 / 16)
+/* vDSO location */
+#define AT_SYSINFO_EHDR	33
+
+#endif
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
new file mode 100644
index 000000000000..d4a63338a53c
--- /dev/null
+++ b/arch/arm64/include/asm/barrier.h
@@ -0,0 +1,52 @@
+/*
+ * Based on arch/arm/include/asm/barrier.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#ifndef __ASSEMBLY__
+
+#define sev()		asm volatile("sev" : : : "memory")
+#define wfe()		asm volatile("wfe" : : : "memory")
+#define wfi()		asm volatile("wfi" : : : "memory")
+
+#define isb()		asm volatile("isb" : : : "memory")
+#define dsb()		asm volatile("dsb sy" : : : "memory")
+
+#define mb()		dsb()
+#define rmb()		asm volatile("dsb ld" : : : "memory")
+#define wmb()		asm volatile("dsb st" : : : "memory")
+
+#ifndef CONFIG_SMP
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#else
+#define smp_mb()	asm volatile("dmb ish" : : : "memory")
+#define smp_rmb()	asm volatile("dmb ishld" : : : "memory")
+#define smp_wmb()	asm volatile("dmb ishst" : : : "memory")
+#endif
+
+#define read_barrier_depends()		do { } while(0)
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
+#define nop()		asm volatile("nop");
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_BARRIER_H */
diff --git a/arch/arm64/include/asm/bitops.h b/arch/arm64/include/asm/bitops.h
new file mode 100644
index 000000000000..5e693073b030
--- /dev/null
+++ b/arch/arm64/include/asm/bitops.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <linux/compiler.h>
+
+#include <asm/barrier.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+#endif
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/builtin-__ffs.h>
+#include <asm-generic/bitops/builtin-ffs.h>
+#include <asm-generic/bitops/builtin-__fls.h>
+#include <asm-generic/bitops/builtin-fls.h>
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __ASM_BITOPS_H */
diff --git a/arch/arm64/include/asm/bitsperlong.h b/arch/arm64/include/asm/bitsperlong.h
new file mode 100644
index 000000000000..fce9c2924fa3
--- /dev/null
+++ b/arch/arm64/include/asm/bitsperlong.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_BITSPERLONG_H
+#define __ASM_BITSPERLONG_H
+
+#define __BITS_PER_LONG 64
+
+#include <asm-generic/bitsperlong.h>
+
+#endif	/* __ASM_BITSPERLONG_H */
diff --git a/arch/arm64/include/asm/byteorder.h b/arch/arm64/include/asm/byteorder.h
new file mode 100644
index 000000000000..2b92046aafc5
--- /dev/null
+++ b/arch/arm64/include/asm/byteorder.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_BYTEORDER_H
+#define __ASM_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif	/* __ASM_BYTEORDER_H */
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
new file mode 100644
index 000000000000..390308a67f0d
--- /dev/null
+++ b/arch/arm64/include/asm/cache.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+#define L1_CACHE_SHIFT		6
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+#define ARCH_SLAB_MINALIGN	8
+
+#endif
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
new file mode 100644
index 000000000000..aa3132ab7f29
--- /dev/null
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -0,0 +1,148 @@
+/*
+ * Based on arch/arm/include/asm/cacheflush.h
+ *
+ * Copyright (C) 1999-2002 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CACHEFLUSH_H
+#define __ASM_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
+ */
+#define PG_dcache_clean PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/arm64/mm/cache.S implements these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive; start
+ *	addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/cachetlb.txt for more information. Please note that
+ *	the implementation assumes non-aliasing VIPT D-cache and (aliasing)
+ *	VIPT or ASID-tagged VIVT I-cache.
+ *
+ *	flush_cache_all()
+ *
+ *		Unconditionally clean and invalidate the entire cache.
+ *
+ *	flush_cache_mm(mm)
+ *
+ *		Clean and invalidate all user space cache entries
+ *		before a change of page tables.
+ *
+ *	flush_icache_range(start, end)
+ *
+ *		Ensure coherency between the I-cache and the D-cache in the
+ *		region described by start, end.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	__flush_cache_user_range(start, end)
+ *
+ *		Ensure coherency between the I-cache and the D-cache in the
+ *		region described by start, end.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	__flush_dcache_area(kaddr, size)
+ *
+ *		Ensure that the data held in page is written back.
+ *		- kaddr  - page address
+ *		- size   - region size
+ */
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void __flush_dcache_area(void *addr, size_t len);
+extern void __flush_cache_user_range(unsigned long start, unsigned long end);
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+	unsigned long, void *, const void *, unsigned long);
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page *);
+
+static inline void __flush_icache_all(void)
+{
+	asm("ic	ialluis");
+}
+
+#define flush_dcache_mmap_lock(mapping) \
+	spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma,page,addr,len) \
+	flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here.  In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma,page)	do { } while (0)
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
+ * caches, since the direct-mappings of these pages may contain cached
+ * data, we need to do a full cache flush to ensure that writebacks
+ * don't corrupt data placed into these pages via the new mappings.
+ */
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	/*
+	 * set_pte_at() called from vmap_pte_range() does not
+	 * have a DSB after cleaning the cache line.
+	 */
+	dsb();
+}
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+}
+
+#endif
diff --git a/arch/arm64/include/asm/cachetype.h b/arch/arm64/include/asm/cachetype.h
new file mode 100644
index 000000000000..85f5f511352a
--- /dev/null
+++ b/arch/arm64/include/asm/cachetype.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CACHETYPE_H
+#define __ASM_CACHETYPE_H
+
+#include <asm/cputype.h>
+
+#define CTR_L1IP_SHIFT		14
+#define CTR_L1IP_MASK		3
+
+#define ICACHE_POLICY_RESERVED	0
+#define ICACHE_POLICY_AIVIVT	1
+#define ICACHE_POLICY_VIPT	2
+#define ICACHE_POLICY_PIPT	3
+
+static inline u32 icache_policy(void)
+{
+	return (read_cpuid_cachetype() >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK;
+}
+
+/*
+ * Whilst the D-side always behaves as PIPT on AArch64, aliasing is
+ * permitted in the I-cache.
+ */
+static inline int icache_is_aliasing(void)
+{
+	return icache_policy() != ICACHE_POLICY_PIPT;
+}
+
+static inline int icache_is_aivivt(void)
+{
+	return icache_policy() == ICACHE_POLICY_AIVIVT;
+}
+
+#endif	/* __ASM_CACHETYPE_H */
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
new file mode 100644
index 000000000000..e0e65b069d9e
--- /dev/null
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -0,0 +1,173 @@
+/*
+ * Based on arch/arm/include/asm/cmpxchg.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CMPXCHG_H
+#define __ASM_CMPXCHG_H
+
+#include <linux/bug.h>
+
+#include <asm/barrier.h>
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	unsigned long ret, tmp;
+
+	switch (size) {
+	case 1:
+		asm volatile("//	__xchg1\n"
+		"1:	ldaxrb	%w0, [%3]\n"
+		"	stlxrb	%w1, %w2, [%3]\n"
+		"	cbnz	%w1, 1b\n"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 2:
+		asm volatile("//	__xchg2\n"
+		"1:	ldaxrh	%w0, [%3]\n"
+		"	stlxrh	%w1, %w2, [%3]\n"
+		"	cbnz	%w1, 1b\n"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 4:
+		asm volatile("//	__xchg4\n"
+		"1:	ldaxr	%w0, [%3]\n"
+		"	stlxr	%w1, %w2, [%3]\n"
+		"	cbnz	%w1, 1b\n"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 8:
+		asm volatile("//	__xchg8\n"
+		"1:	ldaxr	%0, [%3]\n"
+		"	stlxr	%w1, %2, [%3]\n"
+		"	cbnz	%w1, 1b\n"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	default:
+		BUILD_BUG();
+	}
+
+	return ret;
+}
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long oldval = 0, res;
+
+	switch (size) {
+	case 1:
+		do {
+			asm volatile("// __cmpxchg1\n"
+			"	ldxrb	%w1, [%2]\n"
+			"	mov	%w0, #0\n"
+			"	cmp	%w1, %w3\n"
+			"	b.ne	1f\n"
+			"	stxrb	%w0, %w4, [%2]\n"
+			"1:\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "cc");
+		} while (res);
+		break;
+
+	case 2:
+		do {
+			asm volatile("// __cmpxchg2\n"
+			"	ldxrh	%w1, [%2]\n"
+			"	mov	%w0, #0\n"
+			"	cmp	%w1, %w3\n"
+			"	b.ne	1f\n"
+			"	stxrh	%w0, %w4, [%2]\n"
+			"1:\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+
+	case 4:
+		do {
+			asm volatile("// __cmpxchg4\n"
+			"	ldxr	%w1, [%2]\n"
+			"	mov	%w0, #0\n"
+			"	cmp	%w1, %w3\n"
+			"	b.ne	1f\n"
+			"	stxr	%w0, %w4, [%2]\n"
+			"1:\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "cc");
+		} while (res);
+		break;
+
+	case 8:
+		do {
+			asm volatile("// __cmpxchg8\n"
+			"	ldxr	%1, [%2]\n"
+			"	mov	%w0, #0\n"
+			"	cmp	%1, %3\n"
+			"	b.ne	1f\n"
+			"	stxr	%w0, %4, [%2]\n"
+			"1:\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "cc");
+		} while (res);
+		break;
+
+	default:
+		BUILD_BUG();
+	}
+
+	return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+					 unsigned long new, int size)
+{
+	unsigned long ret;
+
+	smp_mb();
+	ret = __cmpxchg(ptr, old, new, size);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_mb((ptr),			\
+					  (unsigned long)(o),		\
+					  (unsigned long)(n),		\
+					  sizeof(*(ptr))))
+
+#define cmpxchg_local(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr),				\
+				       (unsigned long)(o),		\
+				       (unsigned long)(n),		\
+				       sizeof(*(ptr))))
+
+#endif	/* __ASM_CMPXCHG_H */
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
new file mode 100644
index 000000000000..37e610dc084e
--- /dev/null
+++ b/arch/arm64/include/asm/compat.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_COMPAT_H
+#define __ASM_COMPAT_H
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"armv8l\0\0"
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u32		__compat_uid_t;
+typedef u32		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+typedef u32		compat_uptr_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid32_t	st_uid;
+	__compat_gid32_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	compat_time_t	st_atime;
+	u32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	u32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4[2];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_flags;
+	int		f_spare[4];
+};
+
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		/* The padding is the same size as AArch64. */
+		int _pad[128/sizeof(int) - 3];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			__compat_uid32_t _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			__compat_uid32_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			__compat_uid32_t _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			compat_uptr_t _addr; /* faulting insn/memory ref. */
+			short _addr_lsb; /* LSB of the reported address */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			compat_long_t _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *arch_compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	return (void __user *)regs->compat_sp - len;
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
+static inline int is_compat_thread(struct thread_info *thread)
+{
+	return test_ti_thread_flag(thread, TIF_32BIT);
+}
+
+#else /* !CONFIG_COMPAT */
+
+static inline int is_compat_task(void)
+{
+	return 0;
+}
+
+static inline int is_compat_thread(struct thread_info *thread)
+{
+	return 0;
+}
+
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+#endif /* __ASM_COMPAT_H */
diff --git a/arch/arm64/include/asm/compiler.h b/arch/arm64/include/asm/compiler.h
new file mode 100644
index 000000000000..ee35fd0f2236
--- /dev/null
+++ b/arch/arm64/include/asm/compiler.h
@@ -0,0 +1,30 @@
+/*
+ * Based on arch/arm/include/asm/compiler.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_COMPILER_H
+#define __ASM_COMPILER_H
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust the
+ * compiler from one version to another so a bit of paranoia won't hurt.  This
+ * string is meant to be concatenated with the inline asm string and will
+ * cause compilation to stop on mismatch.  (for details, see gcc PR 15089)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#endif	/* __ASM_COMPILER_H */
diff --git a/arch/arm64/include/asm/cputable.h b/arch/arm64/include/asm/cputable.h
new file mode 100644
index 000000000000..e3bd983d3661
--- /dev/null
+++ b/arch/arm64/include/asm/cputable.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm64/include/asm/cputable.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CPUTABLE_H
+#define __ASM_CPUTABLE_H
+
+struct cpu_info {
+	unsigned int	cpu_id_val;
+	unsigned int	cpu_id_mask;
+	const char	*cpu_name;
+	unsigned long	(*cpu_setup)(void);
+};
+
+extern struct cpu_info *lookup_processor_type(unsigned int);
+
+#endif
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
new file mode 100644
index 000000000000..ef54125e6c1e
--- /dev/null
+++ b/arch/arm64/include/asm/cputype.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CPUTYPE_H
+#define __ASM_CPUTYPE_H
+
+#define ID_MIDR_EL1		"midr_el1"
+#define ID_CTR_EL0		"ctr_el0"
+
+#define ID_AA64PFR0_EL1		"id_aa64pfr0_el1"
+#define ID_AA64DFR0_EL1		"id_aa64dfr0_el1"
+#define ID_AA64AFR0_EL1		"id_aa64afr0_el1"
+#define ID_AA64ISAR0_EL1	"id_aa64isar0_el1"
+#define ID_AA64MMFR0_EL1	"id_aa64mmfr0_el1"
+
+#define read_cpuid(reg) ({						\
+	u64 __val;							\
+	asm("mrs	%0, " reg : "=r" (__val));			\
+	__val;								\
+})
+
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline u32 __attribute_const__ read_cpuid_id(void)
+{
+	return read_cpuid(ID_MIDR_EL1);
+}
+
+static inline u32 __attribute_const__ read_cpuid_cachetype(void)
+{
+	return read_cpuid(ID_CTR_EL0);
+}
+
+#endif
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
new file mode 100644
index 000000000000..7eaa0b302493
--- /dev/null
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_DEBUG_MONITORS_H
+#define __ASM_DEBUG_MONITORS_H
+
+#ifdef __KERNEL__
+
+#define	DBG_ESR_EVT(x)		(((x) >> 27) & 0x7)
+
+/* AArch64 */
+#define DBG_ESR_EVT_HWBP	0x0
+#define DBG_ESR_EVT_HWSS	0x1
+#define DBG_ESR_EVT_HWWP	0x2
+#define DBG_ESR_EVT_BRK		0x6
+
+enum debug_el {
+	DBG_ACTIVE_EL0 = 0,
+	DBG_ACTIVE_EL1,
+};
+
+/* AArch32 */
+#define DBG_ESR_EVT_BKPT	0x4
+#define DBG_ESR_EVT_VECC	0x5
+
+#define AARCH32_BREAK_ARM	0x07f001f0
+#define AARCH32_BREAK_THUMB	0xde01
+#define AARCH32_BREAK_THUMB2_LO	0xf7f0
+#define AARCH32_BREAK_THUMB2_HI	0xa000
+
+#ifndef __ASSEMBLY__
+struct task_struct;
+
+#define local_dbg_save(flags)							\
+	do {									\
+		typecheck(unsigned long, flags);				\
+		asm volatile(							\
+		"mrs	%0, daif			// local_dbg_save\n"	\
+		"msr	daifset, #8"						\
+		: "=r" (flags) : : "memory");					\
+	} while (0)
+
+#define local_dbg_restore(flags)						\
+	do {									\
+		typecheck(unsigned long, flags);				\
+		asm volatile(							\
+		"msr	daif, %0			// local_dbg_restore\n"	\
+		: : "r" (flags) : "memory");					\
+	} while (0)
+
+#define DBG_ARCH_ID_RESERVED	0	/* In case of ptrace ABI updates. */
+
+u8 debug_monitors_arch(void);
+
+void enable_debug_monitors(enum debug_el el);
+void disable_debug_monitors(enum debug_el el);
+
+void user_rewind_single_step(struct task_struct *task);
+void user_fastforward_single_step(struct task_struct *task);
+
+void kernel_enable_single_step(struct pt_regs *regs);
+void kernel_disable_single_step(void);
+int kernel_active_single_step(void);
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+int reinstall_suspended_bps(struct pt_regs *regs);
+#else
+static inline int reinstall_suspended_bps(struct pt_regs *regs)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif	/* __ASSEMBLY */
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_DEBUG_MONITORS_H */
diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm64/include/asm/device.h
index 88af1ac28ead..0d8453c755a8 100644
--- a/arch/arm/mach-netx/include/mach/eth.h
+++ b/arch/arm64/include/asm/device.h
@@ -1,11 +1,9 @@
 /*
- * arch/arm/mach-netx/include/mach/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (C) 2012 ARM Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -13,15 +11,16 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#ifndef __ASM_DEVICE_H
+#define __ASM_DEVICE_H
 
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
+struct dev_archdata {
+	struct dma_map_ops *dma_ops;
+};
 
-struct netxeth_platform_data {
-	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
+struct pdev_archdata {
 };
 
 #endif
diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..538f4b44db5d
--- /dev/null
+++ b/arch/arm64/include/asm/dma-mapping.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_DMA_MAPPING_H
+#define __ASM_DMA_MAPPING_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+
+#include <asm-generic/dma-coherent.h>
+
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
+extern struct dma_map_ops *dma_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return dma_ops;
+	else
+		return dev->archdata.dma_ops;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return (dma_addr_t)paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
+{
+	return (phys_addr_t)dev_addr;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dev_addr)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	return ops->mapping_error(dev, dev_addr);
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	return ops->dma_supported(dev, mask);
+}
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size - 1 <= *dev->dma_mask;
+}
+
+static inline void dma_mark_clean(void *addr, size_t size)
+{
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flags)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *vaddr;
+
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &vaddr))
+		return vaddr;
+
+	vaddr = ops->alloc(dev, size, dma_handle, flags, NULL);
+	debug_dma_alloc_coherent(dev, size, *dma_handle, vaddr);
+	return vaddr;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dev_addr)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (dma_release_from_coherent(dev, get_order(size), vaddr))
+		return;
+
+	debug_dma_free_coherent(dev, size, vaddr, dev_addr);
+	ops->free(dev, size, vaddr, dev_addr, NULL);
+}
+
+/*
+ * There is no dma_cache_sync() implementation, so just return NULL here.
+ */
+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
+					  dma_addr_t *handle, gfp_t flags)
+{
+	return NULL;
+}
+
+static inline void dma_free_noncoherent(struct device *dev, size_t size,
+					void *cpu_addr, dma_addr_t handle)
+{
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_DMA_MAPPING_H */
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
new file mode 100644
index 000000000000..cf284649dfcb
--- /dev/null
+++ b/arch/arm64/include/asm/elf.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <asm/hwcap.h>
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fp elf_fpregset_t;
+
+#define EM_AARCH64		183
+
+/*
+ * AArch64 static relocation types.
+ */
+
+/* Miscellaneous. */
+#define R_ARM_NONE			0
+#define R_AARCH64_NONE			256
+
+/* Data. */
+#define R_AARCH64_ABS64			257
+#define R_AARCH64_ABS32			258
+#define R_AARCH64_ABS16			259
+#define R_AARCH64_PREL64		260
+#define R_AARCH64_PREL32		261
+#define R_AARCH64_PREL16		262
+
+/* Instructions. */
+#define R_AARCH64_MOVW_UABS_G0		263
+#define R_AARCH64_MOVW_UABS_G0_NC	264
+#define R_AARCH64_MOVW_UABS_G1		265
+#define R_AARCH64_MOVW_UABS_G1_NC	266
+#define R_AARCH64_MOVW_UABS_G2		267
+#define R_AARCH64_MOVW_UABS_G2_NC	268
+#define R_AARCH64_MOVW_UABS_G3		269
+
+#define R_AARCH64_MOVW_SABS_G0		270
+#define R_AARCH64_MOVW_SABS_G1		271
+#define R_AARCH64_MOVW_SABS_G2		272
+
+#define R_AARCH64_LD_PREL_LO19		273
+#define R_AARCH64_ADR_PREL_LO21		274
+#define R_AARCH64_ADR_PREL_PG_HI21	275
+#define R_AARCH64_ADR_PREL_PG_HI21_NC	276
+#define R_AARCH64_ADD_ABS_LO12_NC	277
+#define R_AARCH64_LDST8_ABS_LO12_NC	278
+
+#define R_AARCH64_TSTBR14		279
+#define R_AARCH64_CONDBR19		280
+#define R_AARCH64_JUMP26		282
+#define R_AARCH64_CALL26		283
+#define R_AARCH64_LDST16_ABS_LO12_NC	284
+#define R_AARCH64_LDST32_ABS_LO12_NC	285
+#define R_AARCH64_LDST64_ABS_LO12_NC	286
+#define R_AARCH64_LDST128_ABS_LO12_NC	299
+
+#define R_AARCH64_MOVW_PREL_G0		287
+#define R_AARCH64_MOVW_PREL_G0_NC	288
+#define R_AARCH64_MOVW_PREL_G1		289
+#define R_AARCH64_MOVW_PREL_G1_NC	290
+#define R_AARCH64_MOVW_PREL_G2		291
+#define R_AARCH64_MOVW_PREL_G2_NC	292
+#define R_AARCH64_MOVW_PREL_G3		293
+
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_AARCH64
+
+#define ELF_PLATFORM_SIZE	16
+#define ELF_PLATFORM		("aarch64")
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == EM_AARCH64)
+
+#define elf_read_implies_exec(ex,stk)	(stk != EXSTACK_DISABLE_X)
+
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+extern unsigned long randomize_et_dyn(unsigned long base);
+#define ELF_ET_DYN_BASE	(randomize_et_dyn(2 * TASK_SIZE_64 / 3))
+
+/*
+ * When the program starts, a1 contains a pointer to a function to be
+ * registered with atexit, as per the SVR4 ABI.  A value of 0 means we have no
+ * such handler.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->regs[0] = 0
+
+#define SET_PERSONALITY(ex)		clear_thread_flag(TIF_32BIT);
+
+#define ARCH_DLINFO							\
+do {									\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR,					\
+		    (elf_addr_t)current->mm->context.vdso);		\
+} while (0)
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int uses_interp);
+
+/* 1GB of VA */
+#ifdef CONFIG_COMPAT
+#define STACK_RND_MASK			(test_thread_flag(TIF_32BIT) ? \
+						0x7ff >> (PAGE_SHIFT - 12) : \
+						0x3ffff >> (PAGE_SHIFT - 12))
+#else
+#define STACK_RND_MASK			(0x3ffff >> (PAGE_SHIFT - 12))
+#endif
+
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
+#ifdef CONFIG_COMPAT
+#define EM_ARM				40
+#define COMPAT_ELF_PLATFORM		("v8l")
+
+#define COMPAT_ELF_ET_DYN_BASE		(randomize_et_dyn(2 * TASK_SIZE_32 / 3))
+
+/* AArch32 registers. */
+#define COMPAT_ELF_NGREG		18
+typedef unsigned int			compat_elf_greg_t;
+typedef compat_elf_greg_t		compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+/* AArch32 EABI. */
+#define EF_ARM_EABI_MASK		0xff000000
+#define compat_elf_check_arch(x)	(((x)->e_machine == EM_ARM) && \
+					 ((x)->e_flags & EF_ARM_EABI_MASK))
+
+#define compat_start_thread		compat_start_thread
+#define COMPAT_SET_PERSONALITY(ex)	set_thread_flag(TIF_32BIT);
+#define COMPAT_ARCH_DLINFO
+extern int aarch32_setup_vectors_page(struct linux_binprm *bprm,
+				      int uses_interp);
+#define compat_arch_setup_additional_pages \
+					aarch32_setup_vectors_page
+
+#endif /* CONFIG_COMPAT */
+
+#endif
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
new file mode 100644
index 000000000000..ac63519b7b90
--- /dev/null
+++ b/arch/arm64/include/asm/exception.h
@@ -0,0 +1,23 @@
+/*
+ * Based on arch/arm/include/asm/exception.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_EXCEPTION_H
+#define __ASM_EXCEPTION_H
+
+#define __exception	__attribute__((section(".exception.text")))
+
+#endif	/* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/include/asm/exec.h b/arch/arm64/include/asm/exec.h
new file mode 100644
index 000000000000..db0563c23482
--- /dev/null
+++ b/arch/arm64/include/asm/exec.h
@@ -0,0 +1,23 @@
+/*
+ * Based on arch/arm/include/asm/exec.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_EXEC_H
+#define __ASM_EXEC_H
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif	/* __ASM_EXEC_H */
diff --git a/arch/arm64/include/asm/fb.h b/arch/arm64/include/asm/fb.h
new file mode 100644
index 000000000000..adb88a64b2fe
--- /dev/null
+++ b/arch/arm64/include/asm/fb.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_FB_H_
+#define __ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* __ASM_FB_H_ */
diff --git a/arch/arm64/include/asm/fcntl.h b/arch/arm64/include/asm/fcntl.h
new file mode 100644
index 000000000000..cd2e630c235e
--- /dev/null
+++ b/arch/arm64/include/asm/fcntl.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_FCNTL_H
+#define __ASM_FCNTL_H
+
+/*
+ * Using our own definitions for AArch32 (compat) support.
+ */
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
new file mode 100644
index 000000000000..b42fab9f62a9
--- /dev/null
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_FP_H
+#define __ASM_FP_H
+
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FP/SIMD storage area has:
+ *  - FPSR and FPCR
+ *  - 32 128-bit data registers
+ *
+ * Note that user_fp forms a prefix of this structure, which is relied
+ * upon in the ptrace FP/SIMD accessors. struct user_fpsimd_state must
+ * form a prefix of struct fpsimd_state.
+ */
+struct fpsimd_state {
+	union {
+		struct user_fpsimd_state user_fpsimd;
+		struct {
+			__uint128_t vregs[32];
+			u32 fpsr;
+			u32 fpcr;
+		};
+	};
+};
+
+#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
+/* Masks for extracting the FPSR and FPCR from the FPSCR */
+#define VFP_FPSCR_STAT_MASK	0xf800009f
+#define VFP_FPSCR_CTRL_MASK	0x07f79f00
+/*
+ * The VFP state has 32x64-bit registers and a single 32-bit
+ * control/status register.
+ */
+#define VFP_STATE_SIZE		((32 * 8) + 4)
+#endif
+
+struct task_struct;
+
+extern void fpsimd_save_state(struct fpsimd_state *state);
+extern void fpsimd_load_state(struct fpsimd_state *state);
+
+extern void fpsimd_thread_switch(struct task_struct *next);
+extern void fpsimd_flush_thread(void);
+
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
new file mode 100644
index 000000000000..3468ae8439fa
--- /dev/null
+++ b/arch/arm64/include/asm/futex.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_FUTEX_H
+#define __ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg)		\
+	asm volatile(							\
+"1:	ldaxr	%w1, %2\n"						\
+	insn "\n"							\
+"2:	stlxr	%w3, %w0, %2\n"						\
+"	cbnz	%w3, 1b\n"						\
+"3:\n"									\
+"	.pushsection .fixup,\"ax\"\n"					\
+"4:	mov	%w0, %w5\n"						\
+"	b	3b\n"							\
+"	.popsection\n"							\
+"	.pushsection __ex_table,\"a\"\n"				\
+"	.align	3\n"							\
+"	.quad	1b, 4b, 2b, 4b\n"					\
+"	.popsection\n"							\
+	: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp)	\
+	: "r" (oparg), "Ir" (-EFAULT)					\
+	: "cc")
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tmp;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	pagefault_disable();	/* implies preempt_disable() */
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov	%w0, %w4",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add	%w0, %w1, %w4",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("orr	%w0, %w1, %w4",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("and	%w0, %w1, %w4",
+				  ret, oldval, uaddr, tmp, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("eor	%w0, %w1, %w4",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();	/* subsumes preempt_enable() */
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret = 0;
+	u32 val, tmp;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+"1:	ldaxr	%w1, %2\n"
+"	sub	%w3, %w1, %w4\n"
+"	cbnz	%w3, 3f\n"
+"2:	stlxr	%w3, %w5, %2\n"
+"	cbnz	%w3, 1b\n"
+"3:\n"
+"	.pushsection .fixup,\"ax\"\n"
+"4:	mov	%w0, %w6\n"
+"	b	3b\n"
+"	.popsection\n"
+"	.pushsection __ex_table,\"a\"\n"
+"	.align	3\n"
+"	.quad	1b, 4b, 2b, 4b\n"
+"	.popsection\n"
+	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
+	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
+	: "cc", "memory");
+
+	*uval = val;
+	return ret;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_FUTEX_H */
diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
new file mode 100644
index 000000000000..507546353d62
--- /dev/null
+++ b/arch/arm64/include/asm/hardirq.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+#define NR_IPI	4
+
+typedef struct {
+	unsigned int __softirq_pending;
+#ifdef CONFIG_SMP
+	unsigned int ipi_irqs[NR_IPI];
+#endif
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define __inc_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)++
+#define __get_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)
+
+#ifdef CONFIG_SMP
+u64 smp_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu	smp_irq_stat_cpu
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+static inline void ack_bad_irq(unsigned int irq)
+{
+	extern unsigned long irq_err_count;
+	irq_err_count++;
+}
+
+extern void handle_IRQ(unsigned int, struct pt_regs *);
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
new file mode 100644
index 000000000000..d064047612b1
--- /dev/null
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_HW_BREAKPOINT_H
+#define __ASM_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+
+struct arch_hw_breakpoint_ctrl {
+	u32 __reserved	: 19,
+	len		: 8,
+	type		: 2,
+	privilege	: 2,
+	enabled		: 1;
+};
+
+struct arch_hw_breakpoint {
+	u64 address;
+	u64 trigger;
+	struct arch_hw_breakpoint_ctrl ctrl;
+};
+
+static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
+{
+	return (ctrl.len << 5) | (ctrl.type << 3) | (ctrl.privilege << 1) |
+		ctrl.enabled;
+}
+
+static inline void decode_ctrl_reg(u32 reg,
+				   struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	ctrl->enabled	= reg & 0x1;
+	reg >>= 1;
+	ctrl->privilege	= reg & 0x3;
+	reg >>= 2;
+	ctrl->type	= reg & 0x3;
+	reg >>= 2;
+	ctrl->len	= reg & 0xff;
+}
+
+/* Breakpoint */
+#define ARM_BREAKPOINT_EXECUTE	0
+
+/* Watchpoints */
+#define ARM_BREAKPOINT_LOAD	1
+#define ARM_BREAKPOINT_STORE	2
+#define AARCH64_ESR_ACCESS_MASK	(1 << 6)
+
+/* Privilege Levels */
+#define AARCH64_BREAKPOINT_EL1	1
+#define AARCH64_BREAKPOINT_EL0	2
+
+/* Lengths */
+#define ARM_BREAKPOINT_LEN_1	0x1
+#define ARM_BREAKPOINT_LEN_2	0x3
+#define ARM_BREAKPOINT_LEN_4	0xf
+#define ARM_BREAKPOINT_LEN_8	0xff
+
+/* Kernel stepping */
+#define ARM_KERNEL_STEP_NONE	0
+#define ARM_KERNEL_STEP_ACTIVE	1
+#define ARM_KERNEL_STEP_SUSPEND	2
+
+/*
+ * Limits.
+ * Changing these will require modifications to the register accessors.
+ */
+#define ARM_MAX_BRP		16
+#define ARM_MAX_WRP		16
+#define ARM_MAX_HBP_SLOTS	(ARM_MAX_BRP + ARM_MAX_WRP)
+
+/* Virtual debug register bases. */
+#define AARCH64_DBG_REG_BVR	0
+#define AARCH64_DBG_REG_BCR	(AARCH64_DBG_REG_BVR + ARM_MAX_BRP)
+#define AARCH64_DBG_REG_WVR	(AARCH64_DBG_REG_BCR + ARM_MAX_BRP)
+#define AARCH64_DBG_REG_WCR	(AARCH64_DBG_REG_WVR + ARM_MAX_WRP)
+
+/* Debug register names. */
+#define AARCH64_DBG_REG_NAME_BVR	"bvr"
+#define AARCH64_DBG_REG_NAME_BCR	"bcr"
+#define AARCH64_DBG_REG_NAME_WVR	"wvr"
+#define AARCH64_DBG_REG_NAME_WCR	"wcr"
+
+/* Accessor macros for the debug registers. */
+#define AARCH64_DBG_READ(N, REG, VAL) do {\
+	asm volatile("mrs %0, dbg" REG #N "_el1" : "=r" (VAL));\
+} while (0)
+
+#define AARCH64_DBG_WRITE(N, REG, VAL) do {\
+	asm volatile("msr dbg" REG #N "_el1, %0" :: "r" (VAL));\
+} while (0)
+
+struct task_struct;
+struct notifier_block;
+struct perf_event;
+struct pmu;
+
+extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+				  int *gen_len, int *gen_type);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+extern int arch_install_hw_breakpoint(struct perf_event *bp);
+extern void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+extern void hw_breakpoint_pmu_read(struct perf_event *bp);
+extern int hw_breakpoint_slots(int type);
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern void hw_breakpoint_thread_switch(struct task_struct *next);
+extern void ptrace_hw_copy_thread(struct task_struct *task);
+#else
+static inline void hw_breakpoint_thread_switch(struct task_struct *next)
+{
+}
+static inline void ptrace_hw_copy_thread(struct task_struct *task)
+{
+}
+#endif
+
+extern struct pmu perf_ops_bp;
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_BREAKPOINT_H */
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
new file mode 100644
index 000000000000..db05f9766112
--- /dev/null
+++ b/arch/arm64/include/asm/hwcap.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_HWCAP_H
+#define __ASM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_FP		(1 << 0)
+#define HWCAP_ASIMD		(1 << 1)
+
+#define COMPAT_HWCAP_HALF	(1 << 1)
+#define COMPAT_HWCAP_THUMB	(1 << 2)
+#define COMPAT_HWCAP_FAST_MULT	(1 << 4)
+#define COMPAT_HWCAP_VFP	(1 << 6)
+#define COMPAT_HWCAP_EDSP	(1 << 7)
+#define COMPAT_HWCAP_NEON	(1 << 12)
+#define COMPAT_HWCAP_VFPv3	(1 << 13)
+#define COMPAT_HWCAP_TLS	(1 << 15)
+#define COMPAT_HWCAP_VFPv4	(1 << 16)
+#define COMPAT_HWCAP_IDIVA	(1 << 17)
+#define COMPAT_HWCAP_IDIVT	(1 << 18)
+#define COMPAT_HWCAP_IDIV	(COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP		(elf_hwcap)
+#define COMPAT_ELF_HWCAP	(COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
+				 COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
+				 COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
+				 COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
+				 COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
+
+extern unsigned int elf_hwcap;
+#endif
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
new file mode 100644
index 000000000000..74a2a7d304a9
--- /dev/null
+++ b/arch/arm64/include/asm/io.h
@@ -0,0 +1,258 @@
+/*
+ * Based on arch/arm/include/asm/io.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_IO_H
+#define __ASM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+#include <asm/byteorder.h>
+#include <asm/barrier.h>
+#include <asm/pgtable.h>
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.
+ */
+static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+	asm volatile("strb %w0, [%1]" : : "r" (val), "r" (addr));
+}
+
+static inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+	asm volatile("strh %w0, [%1]" : : "r" (val), "r" (addr));
+}
+
+static inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+	asm volatile("str %w0, [%1]" : : "r" (val), "r" (addr));
+}
+
+static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
+{
+	asm volatile("str %0, [%1]" : : "r" (val), "r" (addr));
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 val;
+	asm volatile("ldrb %w0, [%1]" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 val;
+	asm volatile("ldrh %w0, [%1]" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 val;
+	asm volatile("ldr %w0, [%1]" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	u64 val;
+	asm volatile("ldr %0, [%1]" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+/* IO barriers */
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+
+#define mmiowb()		do { } while (0)
+
+/*
+ * Relaxed I/O memory access primitives. These follow the Device memory
+ * ordering rules but do not guarantee any ordering relative to Normal memory
+ * accesses.
+ */
+#define readb_relaxed(c)	({ u8  __v = __raw_readb(c); __v; })
+#define readw_relaxed(c)	({ u16 __v = le16_to_cpu((__force __le16)__raw_readw(c)); __v; })
+#define readl_relaxed(c)	({ u32 __v = le32_to_cpu((__force __le32)__raw_readl(c)); __v; })
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb((v),(c)))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16)cpu_to_le16(v),(c)))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32)cpu_to_le32(v),(c)))
+
+/*
+ * I/O memory access primitives. Reads are ordered relative to any
+ * following Normal memory access. Writes are ordered relative to any prior
+ * Normal memory access.
+ */
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed((v),(c)); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed((v),(c)); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed((v),(c)); })
+
+/*
+ *  I/O port access primitives.
+ */
+#define IO_SPACE_LIMIT		0xffff
+#define PCI_IOBASE		((void __iomem *)0xffffffbbfffe0000UL)
+
+static inline u8 inb(unsigned long addr)
+{
+	return readb(addr + PCI_IOBASE);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return readw(addr + PCI_IOBASE);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return readl(addr + PCI_IOBASE);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	writeb(b, addr + PCI_IOBASE);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	writew(b, addr + PCI_IOBASE);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	writel(b, addr + PCI_IOBASE);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	u8 *buf = buffer;
+	while (count--)
+		*buf++ = __raw_readb(addr + PCI_IOBASE);
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	u16 *buf = buffer;
+	while (count--)
+		*buf++ = __raw_readw(addr + PCI_IOBASE);
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	u32 *buf = buffer;
+	while (count--)
+		*buf++ = __raw_readl(addr + PCI_IOBASE);
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	const u8 *buf = buffer;
+	while (count--)
+		__raw_writeb(*buf++, addr + PCI_IOBASE);
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	const u16 *buf = buffer;
+	while (count--)
+		__raw_writew(*buf++, addr + PCI_IOBASE);
+}
+
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	const u32 *buf = buffer;
+	while (count--)
+		__raw_writel(*buf++, addr + PCI_IOBASE);
+}
+
+#define insb_p(port,to,len)	insb(port,to,len)
+#define insw_p(port,to,len)	insw(port,to,len)
+#define insl_p(port,to,len)	insl(port,to,len)
+
+#define outsb_p(port,from,len)	outsb(port,from,len)
+#define outsw_p(port,from,len)	outsw(port,from,len)
+#define outsl_p(port,from,len)	outsl(port,from,len)
+
+/*
+ * String version of I/O memory access operations.
+ */
+extern void __memcpy_fromio(void *, const volatile void __iomem *, size_t);
+extern void __memcpy_toio(volatile void __iomem *, const void *, size_t);
+extern void __memset_io(volatile void __iomem *, int, size_t);
+
+#define memset_io(c,v,l)	__memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)	__memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)	__memcpy_toio((c),(a),(l))
+
+/*
+ * I/O memory mapping functions.
+ */
+extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot);
+extern void __iounmap(volatile void __iomem *addr);
+
+#define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
+
+#define ioremap(addr, size)		__ioremap((addr), (size), PROT_DEVICE_nGnRE)
+#define ioremap_nocache(addr, size)	__ioremap((addr), (size), PROT_DEVICE_nGnRE)
+#define ioremap_wc(addr, size)		__ioremap((addr), (size), PROT_NORMAL_NC)
+#define iounmap				__iounmap
+
+#define ARCH_HAS_IOREMAP_WC
+#include <asm-generic/iomap.h>
+
+/*
+ * More restrictive address range checking than the default implementation
+ * (PHYS_OFFSET and PHYS_MASK taken into account).
+ */
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(unsigned long addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+
+extern int devmem_is_allowed(unsigned long pfn);
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_IO_H */
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
new file mode 100644
index 000000000000..a4e1cad3202a
--- /dev/null
+++ b/arch/arm64/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_IRQ_H
+#define __ASM_IRQ_H
+
+#include <asm-generic/irq.h>
+
+extern void (*handle_arch_irq)(struct pt_regs *);
+
+#endif
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
new file mode 100644
index 000000000000..aa11943b8502
--- /dev/null
+++ b/arch/arm64/include/asm/irqflags.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_IRQFLAGS_H
+#define __ASM_IRQFLAGS_H
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+/*
+ * CPU interrupt mask handling.
+ */
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	asm volatile(
+		"mrs	%0, daif		// arch_local_irq_save\n"
+		"msr	daifset, #2"
+		: "=r" (flags)
+		:
+		: "memory");
+	return flags;
+}
+
+static inline void arch_local_irq_enable(void)
+{
+	asm volatile(
+		"msr	daifclr, #2		// arch_local_irq_enable"
+		:
+		:
+		: "memory");
+}
+
+static inline void arch_local_irq_disable(void)
+{
+	asm volatile(
+		"msr	daifset, #2		// arch_local_irq_disable"
+		:
+		:
+		: "memory");
+}
+
+#define local_fiq_enable()	asm("msr	daifclr, #1" : : : "memory")
+#define local_fiq_disable()	asm("msr	daifset, #1" : : : "memory")
+
+/*
+ * Save the current interrupt enable state.
+ */
+static inline unsigned long arch_local_save_flags(void)
+{
+	unsigned long flags;
+	asm volatile(
+		"mrs	%0, daif		// arch_local_save_flags"
+		: "=r" (flags)
+		:
+		: "memory");
+	return flags;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	asm volatile(
+		"msr	daif, %0		// arch_local_irq_restore"
+	:
+	: "r" (flags)
+	: "memory");
+}
+
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags & PSR_I_BIT;
+}
+
+#endif
+#endif
diff --git a/arch/arm64/include/asm/memblock.h b/arch/arm64/include/asm/memblock.h
new file mode 100644
index 000000000000..6afeed2467f1
--- /dev/null
+++ b/arch/arm64/include/asm/memblock.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_MEMBLOCK_H
+#define __ASM_MEMBLOCK_H
+
+extern void arm64_memblock_init(void);
+
+#endif
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
new file mode 100644
index 000000000000..1cac16a001cb
--- /dev/null
+++ b/arch/arm64/include/asm/memory.h
@@ -0,0 +1,144 @@
+/*
+ * Based on arch/arm/include/asm/memory.h
+ *
+ * Copyright (C) 2000-2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_MEMORY_H
+#define __ASM_MEMORY_H
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <linux/types.h>
+#include <asm/sizes.h>
+
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#define UL(x) _AC(x, UL)
+
+/*
+ * PAGE_OFFSET - the virtual address of the start of the kernel image.
+ * VA_BITS - the maximum number of bits for virtual addresses.
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 128MB of the kernel text.
+ */
+#define PAGE_OFFSET		UL(0xffffffc000000000)
+#define MODULES_END		(PAGE_OFFSET)
+#define MODULES_VADDR		(MODULES_END - SZ_64M)
+#define VA_BITS			(39)
+#define TASK_SIZE_64		(UL(1) << VA_BITS)
+
+#ifdef CONFIG_COMPAT
+#define TASK_SIZE_32		UL(0x100000000)
+#define TASK_SIZE		(test_thread_flag(TIF_32BIT) ? \
+				TASK_SIZE_32 : TASK_SIZE_64)
+#else
+#define TASK_SIZE		TASK_SIZE_64
+#endif /* CONFIG_COMPAT */
+
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 4))
+
+#if TASK_SIZE_64 > MODULES_VADDR
+#error Top of 64-bit user space clashes with start of module space
+#endif
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#define __virt_to_phys(x)	(((phys_addr_t)(x) - PAGE_OFFSET + PHYS_OFFSET))
+#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/*
+ * Convert a physical address to a Page Frame Number and back
+ */
+#define	__phys_to_pfn(paddr)	((unsigned long)((paddr) >> PAGE_SHIFT))
+#define	__pfn_to_phys(pfn)	((phys_addr_t)(pfn) << PAGE_SHIFT)
+
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
+/*
+ * Memory types available.
+ */
+#define MT_DEVICE_nGnRnE	0
+#define MT_DEVICE_nGnRE		1
+#define MT_DEVICE_GRE		2
+#define MT_NORMAL_NC		3
+#define MT_NORMAL		4
+
+#ifndef __ASSEMBLY__
+
+extern phys_addr_t		memstart_addr;
+/* PHYS_OFFSET - the physical address of the start of memory. */
+#define PHYS_OFFSET		({ memstart_addr; })
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+static inline phys_addr_t virt_to_phys(const volatile void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+static inline void *phys_to_virt(phys_addr_t x)
+{
+	return (void *)(__phys_to_virt(x));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+/*
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				 ((void *)(kaddr) < (void *)high_memory))
+
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
new file mode 100644
index 000000000000..d4f7fd5b9e33
--- /dev/null
+++ b/arch/arm64/include/asm/mmu.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+typedef struct {
+	unsigned int id;
+	raw_spinlock_t id_lock;
+	void *vdso;
+} mm_context_t;
+
+#define ASID(mm)	((mm)->context.id & 0xffff)
+
+extern void paging_init(void);
+extern void setup_mm_for_reboot(void);
+
+#endif
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
new file mode 100644
index 000000000000..f68465dee026
--- /dev/null
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -0,0 +1,152 @@
+/*
+ * Based on arch/arm/include/asm/mmu_context.h
+ *
+ * Copyright (C) 1996 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_MMU_CONTEXT_H
+#define __ASM_MMU_CONTEXT_H
+
+#include <linux/compiler.h>
+#include <linux/sched.h>
+
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm-generic/mm_hooks.h>
+#include <asm/cputype.h>
+#include <asm/pgtable.h>
+
+#define MAX_ASID_BITS	16
+
+extern unsigned int cpu_last_asid;
+
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void __new_context(struct mm_struct *mm);
+
+/*
+ * Set TTBR0 to empty_zero_page. No translations will be possible via TTBR0.
+ */
+static inline void cpu_set_reserved_ttbr0(void)
+{
+	unsigned long ttbr = page_to_phys(empty_zero_page);
+
+	asm(
+	"	msr	ttbr0_el1, %0			// set TTBR0\n"
+	"	isb"
+	:
+	: "r" (ttbr));
+}
+
+static inline void switch_new_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	__new_context(mm);
+
+	local_irq_save(flags);
+	cpu_switch_mm(mm->pgd, mm);
+	local_irq_restore(flags);
+}
+
+static inline void check_and_switch_context(struct mm_struct *mm,
+					    struct task_struct *tsk)
+{
+	/*
+	 * Required during context switch to avoid speculative page table
+	 * walking with the wrong TTBR.
+	 */
+	cpu_set_reserved_ttbr0();
+
+	if (!((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS))
+		/*
+		 * The ASID is from the current generation, just switch to the
+		 * new pgd. This condition is only true for calls from
+		 * context_switch() and interrupts are already disabled.
+		 */
+		cpu_switch_mm(mm->pgd, mm);
+	else if (irqs_disabled())
+		/*
+		 * Defer the new ASID allocation until after the context
+		 * switch critical region since __new_context() cannot be
+		 * called with interrupts disabled.
+		 */
+		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+	else
+		/*
+		 * That is a direct call to switch_mm() or activate_mm() with
+		 * interrupts enabled and a new context.
+		 */
+		switch_new_context(mm);
+}
+
+#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
+#define destroy_context(mm)		do { } while(0)
+
+#define finish_arch_post_lock_switch \
+	finish_arch_post_lock_switch
+static inline void finish_arch_post_lock_switch(void)
+{
+	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
+		struct mm_struct *mm = current->mm;
+		unsigned long flags;
+
+		__new_context(mm);
+
+		local_irq_save(flags);
+		cpu_switch_mm(mm->pgd, mm);
+		local_irq_restore(flags);
+	}
+}
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.  We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_SMP
+	/* check for possible thread migration */
+	if (!cpumask_empty(mm_cpumask(next)) &&
+	    !cpumask_test_cpu(cpu, mm_cpumask(next)))
+		__flush_icache_all();
+#endif
+	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next)
+		check_and_switch_context(next, tsk);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
+
+#endif
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
new file mode 100644
index 000000000000..e80e232b730e
--- /dev/null
+++ b/arch/arm64/include/asm/module.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_MODULE_H
+#define __ASM_MODULE_H
+
+#include <asm-generic/module.h>
+
+#define MODULE_ARCH_VERMAGIC	"aarch64"
+
+#endif /* __ASM_MODULE_H */
diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
new file mode 100644
index 000000000000..46bf66628b6a
--- /dev/null
+++ b/arch/arm64/include/asm/page.h
@@ -0,0 +1,67 @@
+/*
+ * Based on arch/arm/include/asm/page.h
+ *
+ * Copyright (C) 1995-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PAGE_H
+#define __ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#ifdef CONFIG_ARM64_64K_PAGES
+#define PAGE_SHIFT		16
+#else
+#define PAGE_SHIFT		12
+#endif
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
+#define __HAVE_ARCH_GATE_AREA		1
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARM64_64K_PAGES
+#include <asm/pgtable-2level-types.h>
+#else
+#include <asm/pgtable-3level-types.h>
+#endif
+
+extern void __cpu_clear_user_page(void *p, unsigned long user);
+extern void __cpu_copy_user_page(void *to, const void *from,
+				 unsigned long user);
+extern void copy_page(void *to, const void *from);
+extern void clear_page(void *to);
+
+#define clear_user_page(addr,vaddr,pg)  __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
+
+typedef struct page *pgtable_t;
+
+#ifdef CONFIG_HAVE_ARCH_PFN_VALID
+extern int pfn_valid(unsigned long);
+#endif
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/getorder.h>
+
+#endif
diff --git a/arch/arm64/include/asm/param.h b/arch/arm64/include/asm/param.h
new file mode 100644
index 000000000000..8e3a281d448a
--- /dev/null
+++ b/arch/arm64/include/asm/param.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#define EXEC_PAGESIZE	65536
+
+#include <asm-generic/param.h>
+
+#endif
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
new file mode 100644
index 000000000000..a6fffd511c5e
--- /dev/null
+++ b/arch/arm64/include/asm/perf_event.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_PERF_EVENT_H
+#define __ASM_PERF_EVENT_H
+
+/* It's quiet around here... */
+
+#endif
diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h
new file mode 100644
index 000000000000..f214069ec5d5
--- /dev/null
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -0,0 +1,113 @@
+/*
+ * Based on arch/arm/include/asm/pgalloc.h
+ *
+ * Copyright (C) 2000-2001 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGALLOC_H
+#define __ASM_PGALLOC_H
+
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache()		do { } while (0)
+
+#ifndef CONFIG_ARM64_64K_PAGES
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+}
+
+#endif	/* CONFIG_ARM64_64K_PAGES */
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	return (pte_t *)__get_free_page(PGALLOC_GFP);
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte;
+
+	pte = alloc_pages(PGALLOC_GFP, 0);
+	if (pte)
+		pgtable_page_ctor(pte);
+
+	return pte;
+}
+
+/*
+ * Free a PTE table.
+ */
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	if (pte)
+		free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
+				  pmdval_t prot)
+{
+	set_pmd(pmdp, __pmd(pte | prot));
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	/*
+	 * The pmd must be loaded with the physical address of the PTE table
+	 */
+	__pmd_populate(pmdp, __pa(ptep), PMD_TYPE_TABLE);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+	__pmd_populate(pmdp, page_to_phys(ptep), PMD_TYPE_TABLE);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif
diff --git a/arch/arm64/include/asm/pgtable-2level-hwdef.h b/arch/arm64/include/asm/pgtable-2level-hwdef.h
new file mode 100644
index 000000000000..0a8ed3f94e93
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-2level-hwdef.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_2LEVEL_HWDEF_H
+#define __ASM_PGTABLE_2LEVEL_HWDEF_H
+
+/*
+ * With LPAE and 64KB pages, there are 2 levels of page tables. Each level has
+ * 8192 entries of 8 bytes each, occupying a 64KB page. Levels 0 and 1 are not
+ * used. The 2nd level table (PGD for Linux) can cover a range of 4TB, each
+ * entry representing 512MB. The user and kernel address spaces are limited to
+ * 512GB and therefore we only use 1024 entries in the PGD.
+ */
+#define PTRS_PER_PTE		8192
+#define PTRS_PER_PGD		1024
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT		29
+#define PGDIR_SIZE		(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		29
+#define SECTION_SIZE		(_AC(1, UL) << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+#endif
diff --git a/arch/arm64/include/asm/pgtable-2level-types.h b/arch/arm64/include/asm/pgtable-2level-types.h
new file mode 100644
index 000000000000..3c3ca7d361e4
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-2level-types.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_2LEVEL_TYPES_H
+#define __ASM_PGTABLE_2LEVEL_TYPES_H
+
+typedef u64 pteval_t;
+typedef u64 pgdval_t;
+typedef pgdval_t pmdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else	/* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif	/* STRICT_MM_TYPECHECKS */
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif	/* __ASM_PGTABLE_2LEVEL_TYPES_H */
diff --git a/arch/arm64/include/asm/pgtable-3level-hwdef.h b/arch/arm64/include/asm/pgtable-3level-hwdef.h
new file mode 100644
index 000000000000..3dbf941d7767
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-3level-hwdef.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_3LEVEL_HWDEF_H
+#define __ASM_PGTABLE_3LEVEL_HWDEF_H
+
+/*
+ * With LPAE and 4KB pages, there are 3 levels of page tables. Each level has
+ * 512 entries of 8 bytes each, occupying a 4K page. The first level table
+ * covers a range of 512GB, each entry representing 1GB. The user and kernel
+ * address spaces are limited to 512GB each.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		512
+#define PTRS_PER_PGD		512
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT		30
+#define PGDIR_SIZE		(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * PMD_SHIFT determines the size a middle-level page table entry can map.
+ */
+#define PMD_SHIFT		21
+#define PMD_SIZE		(_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		21
+#define SECTION_SIZE		(_AC(1, UL) << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+#endif
diff --git a/arch/arm64/include/asm/pgtable-3level-types.h b/arch/arm64/include/asm/pgtable-3level-types.h
new file mode 100644
index 000000000000..4489615f14a9
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-3level-types.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_3LEVEL_TYPES_H
+#define __ASM_PGTABLE_3LEVEL_TYPES_H
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pgdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pmdval_t pmd; } pmd_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else	/* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pmdval_t pmd_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pmd(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif	/* STRICT_MM_TYPECHECKS */
+
+#include <asm-generic/pgtable-nopud.h>
+
+#endif	/* __ASM_PGTABLE_3LEVEL_TYPES_H */
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
new file mode 100644
index 000000000000..0f3b4581d925
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_HWDEF_H
+#define __ASM_PGTABLE_HWDEF_H
+
+#ifdef CONFIG_ARM64_64K_PAGES
+#include <asm/pgtable-2level-hwdef.h>
+#else
+#include <asm/pgtable-3level-hwdef.h>
+#endif
+
+/*
+ * Hardware page table definitions.
+ *
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_FAULT		(_AT(pmdval_t, 0) << 0)
+#define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT		(_AT(pmdval_t, 1) << 0)
+
+/*
+ * Section
+ */
+#define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_NG		(_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_ATTRINDX(t)		(_AT(pmdval_t, (t)) << 2)
+#define PMD_ATTRINDX_MASK	(_AT(pmdval_t, 7) << 2)
+
+/*
+ * Level 3 descriptor (PTE).
+ */
+#define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_FAULT		(_AT(pteval_t, 0) << 0)
+#define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
+#define PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
+#define PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
+#define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
+#define PTE_AF			(_AT(pteval_t, 1) << 10)	/* Access Flag */
+#define PTE_NG			(_AT(pteval_t, 1) << 11)	/* nG */
+#define PTE_XN			(_AT(pteval_t, 1) << 54)	/* XN */
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PTE_ATTRINDX(t)		(_AT(pteval_t, (t)) << 2)
+#define PTE_ATTRINDX_MASK	(_AT(pteval_t, 7) << 2)
+
+/*
+ * 40-bit physical address supported.
+ */
+#define PHYS_MASK_SHIFT		(40)
+#define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
+
+/*
+ * TCR flags.
+ */
+#define TCR_TxSZ(x)		(((UL(64) - (x)) << 16) | ((UL(64) - (x)) << 0))
+#define TCR_IRGN_NC		((UL(0) << 8) | (UL(0) << 24))
+#define TCR_IRGN_WBWA		((UL(1) << 8) | (UL(1) << 24))
+#define TCR_IRGN_WT		((UL(2) << 8) | (UL(2) << 24))
+#define TCR_IRGN_WBnWA		((UL(3) << 8) | (UL(3) << 24))
+#define TCR_IRGN_MASK		((UL(3) << 8) | (UL(3) << 24))
+#define TCR_ORGN_NC		((UL(0) << 10) | (UL(0) << 26))
+#define TCR_ORGN_WBWA		((UL(1) << 10) | (UL(1) << 26))
+#define TCR_ORGN_WT		((UL(2) << 10) | (UL(2) << 26))
+#define TCR_ORGN_WBnWA		((UL(3) << 10) | (UL(3) << 26))
+#define TCR_ORGN_MASK		((UL(3) << 10) | (UL(3) << 26))
+#define TCR_SHARED		((UL(3) << 12) | (UL(3) << 28))
+#define TCR_TG0_64K		(UL(1) << 14)
+#define TCR_TG1_64K		(UL(1) << 30)
+#define TCR_IPS_40BIT		(UL(2) << 32)
+#define TCR_ASID16		(UL(1) << 36)
+
+#endif
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
new file mode 100644
index 000000000000..8960239be722
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable.h
@@ -0,0 +1,328 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_H
+#define __ASM_PGTABLE_H
+
+#include <asm/proc-fns.h>
+
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Software defined PTE bits definition.
+ */
+#define PTE_VALID		(_AT(pteval_t, 1) << 0)	/* pte_present() check */
+#define PTE_FILE		(_AT(pteval_t, 1) << 2)	/* only when !pte_present() */
+#define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
+#define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
+
+/*
+ * VMALLOC and SPARSEMEM_VMEMMAP ranges.
+ */
+#define VMALLOC_START		UL(0xffffff8000000000)
+#define VMALLOC_END		(PAGE_OFFSET - UL(0x400000000) - SZ_64K)
+
+#define vmemmap			((struct page *)(VMALLOC_END + SZ_64K))
+
+#define FIRST_USER_ADDRESS	0
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#ifndef CONFIG_ARM64_64K_PAGES
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#endif
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up at runtime to
+ * include the cachable and bufferable bits based on memory policy, as well as
+ * any architecture dependent bits like global/ASID and SMP shared mapping
+ * bits.
+ */
+#define _PAGE_DEFAULT		PTE_TYPE_PAGE | PTE_AF
+
+extern pgprot_t pgprot_default;
+
+#define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
+
+#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY)
+#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN)
+#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG)
+#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
+#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
+#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
+#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
+#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY)
+#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_DIRTY)
+
+#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY)
+#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN)
+#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG)
+#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
+#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
+#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+
+#endif /* __ASSEMBLY__ */
+
+#define __P000  __PAGE_NONE
+#define __P001  __PAGE_READONLY
+#define __P010  __PAGE_COPY
+#define __P011  __PAGE_COPY
+#define __P100  __PAGE_READONLY_EXEC
+#define __P101  __PAGE_READONLY_EXEC
+#define __P110  __PAGE_COPY_EXEC
+#define __P111  __PAGE_COPY_EXEC
+
+#define __S000  __PAGE_NONE
+#define __S001  __PAGE_READONLY
+#define __S010  __PAGE_SHARED
+#define __S011  __PAGE_SHARED
+#define __S100  __PAGE_READONLY_EXEC
+#define __S101  __PAGE_READONLY_EXEC
+#define __S110  __PAGE_SHARED_EXEC
+#define __S111  __PAGE_SHARED_EXEC
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+
+#define pte_pfn(pte)		((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT)
+
+#define pfn_pte(pfn,prot)	(__pte(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_clear(mm,addr,ptep)	set_pte(ptep, __pte(0))
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/*
+ * The following only work if pte_present(). Undefined behaviour otherwise.
+ */
+#define pte_present(pte)	(pte_val(pte) & PTE_VALID)
+#define pte_dirty(pte)		(pte_val(pte) & PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & PTE_AF)
+#define pte_special(pte)	(pte_val(pte) & PTE_SPECIAL)
+#define pte_write(pte)		(!(pte_val(pte) & PTE_RDONLY))
+#define pte_exec(pte)		(!(pte_val(pte) & PTE_XN))
+
+#define pte_present_exec_user(pte) \
+	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \
+	 (PTE_VALID | PTE_USER))
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, |= PTE_RDONLY);
+PTE_BIT_FUNC(mkwrite,   &= ~PTE_RDONLY);
+PTE_BIT_FUNC(mkclean,   &= ~PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty,   |= PTE_DIRTY);
+PTE_BIT_FUNC(mkold,     &= ~PTE_AF);
+PTE_BIT_FUNC(mkyoung,   |= PTE_AF);
+PTE_BIT_FUNC(mkspecial, |= PTE_SPECIAL);
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (pte_present_exec_user(pte))
+		__sync_icache_dcache(pte, addr);
+	set_pte(ptep, pte);
+}
+
+/*
+ * Huge pte definitions.
+ */
+#define pte_huge(pte)		((pte_val(pte) & PTE_TYPE_MASK) == PTE_TYPE_HUGEPAGE)
+#define pte_mkhuge(pte)		(__pte((pte_val(pte) & ~PTE_TYPE_MASK) | PTE_TYPE_HUGEPAGE))
+
+#define __pgprot_modify(prot,mask,bits)		\
+	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
+#define __HAVE_ARCH_PTE_SPECIAL
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+#define pgprot_writecombine(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE))
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd))
+
+#define pmd_bad(pmd)		(!(pmd_val(pmd) & 2))
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	*pmdp = pmd;
+	dsb();
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	set_pmd(pmdp, __pmd(0));
+}
+
+static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+{
+	return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+
+#ifndef CONFIG_ARM64_64K_PAGES
+
+#define pud_none(pud)		(!pud_val(pud))
+#define pud_bad(pud)		(!(pud_val(pud) & 2))
+#define pud_present(pud)	(pud_val(pud))
+
+static inline void set_pud(pud_t *pudp, pud_t pud)
+{
+	*pudp = pud;
+	dsb();
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	set_pud(pudp, __pud(0));
+}
+
+static inline pmd_t *pud_page_vaddr(pud_t pud)
+{
+	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+#endif	/* CONFIG_ARM64_64K_PAGES */
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		(((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/* Find an entry in the second-level page table.. */
+#ifndef CONFIG_ARM64_64K_PAGES
+#define pmd_index(addr)		(((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
+}
+#endif
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY;
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
+
+#define SWAPPER_DIR_SIZE	(3 * PAGE_SIZE)
+#define IDMAP_DIR_SIZE		(2 * PAGE_SIZE)
+
+/*
+ * Encode and decode a swap entry:
+ *	bits 0-1:	present (must be zero)
+ *	bit  2:		PTE_FILE
+ *	bits 3-8:	swap type
+ *	bits 9-63:	swap offset
+ */
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/*
+ * Ensure that there are not more swap files than can be encoded in the kernel
+ * the PTEs.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry:
+ *	bits 0-1:	present (must be zero)
+ *	bit  2:		PTE_FILE
+ *	bits 3-63:	file offset / PAGE_SIZE
+ */
+#define pte_file(pte)		(pte_val(pte) & PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	61
+
+extern int kern_addr_valid(unsigned long addr);
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PGTABLE_H */
diff --git a/arch/arm64/include/asm/pmu.h b/arch/arm64/include/asm/pmu.h
new file mode 100644
index 000000000000..e6f087806aaf
--- /dev/null
+++ b/arch/arm64/include/asm/pmu.h
@@ -0,0 +1,82 @@
+/*
+ * Based on arch/arm/include/asm/pmu.h
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PMU_H
+#define __ASM_PMU_H
+
+#ifdef CONFIG_HW_PERF_EVENTS
+
+/* The events for a given PMU register set. */
+struct pmu_hw_events {
+	/*
+	 * The events that are active on the PMU for the given index.
+	 */
+	struct perf_event	**events;
+
+	/*
+	 * A 1 bit for an index indicates that the counter is being used for
+	 * an event. A 0 means that the counter can be used.
+	 */
+	unsigned long           *used_mask;
+
+	/*
+	 * Hardware lock to serialize accesses to PMU registers. Needed for the
+	 * read/modify/write sequences.
+	 */
+	raw_spinlock_t		pmu_lock;
+};
+
+struct arm_pmu {
+	struct pmu		pmu;
+	cpumask_t		active_irqs;
+	const char		*name;
+	irqreturn_t		(*handle_irq)(int irq_num, void *dev);
+	void			(*enable)(struct hw_perf_event *evt, int idx);
+	void			(*disable)(struct hw_perf_event *evt, int idx);
+	int			(*get_event_idx)(struct pmu_hw_events *hw_events,
+						 struct hw_perf_event *hwc);
+	int			(*set_event_filter)(struct hw_perf_event *evt,
+						    struct perf_event_attr *attr);
+	u32			(*read_counter)(int idx);
+	void			(*write_counter)(int idx, u32 val);
+	void			(*start)(void);
+	void			(*stop)(void);
+	void			(*reset)(void *);
+	int			(*map_event)(struct perf_event *event);
+	int			num_events;
+	atomic_t		active_events;
+	struct mutex		reserve_mutex;
+	u64			max_period;
+	struct platform_device	*plat_device;
+	struct pmu_hw_events	*(*get_hw_events)(void);
+};
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+
+u64 armpmu_event_update(struct perf_event *event,
+			struct hw_perf_event *hwc,
+			int idx);
+
+int armpmu_event_set_period(struct perf_event *event,
+			    struct hw_perf_event *hwc,
+			    int idx);
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+#endif /* __ASM_PMU_H */
diff --git a/arch/arm64/include/asm/proc-fns.h b/arch/arm64/include/asm/proc-fns.h
new file mode 100644
index 000000000000..7cdf466fd0c5
--- /dev/null
+++ b/arch/arm64/include/asm/proc-fns.h
@@ -0,0 +1,50 @@
+/*
+ * Based on arch/arm/include/asm/proc-fns.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PROCFNS_H
+#define __ASM_PROCFNS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <asm/page.h>
+
+struct mm_struct;
+
+extern void cpu_cache_off(void);
+extern void cpu_do_idle(void);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+#include <asm/memory.h>
+
+#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
+
+#define cpu_get_pgd()					\
+({							\
+	unsigned long pg;				\
+	asm("mrs	%0, ttbr0_el1\n"		\
+	    : "=r" (pg));				\
+	pg &= ~0xffff000000003ffful;			\
+	(pgd_t *)phys_to_virt(pg);			\
+})
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_PROCFNS_H */
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
new file mode 100644
index 000000000000..39a208a392f7
--- /dev/null
+++ b/arch/arm64/include/asm/processor.h
@@ -0,0 +1,175 @@
+/*
+ * Based on arch/arm/include/asm/processor.h
+ *
+ * Copyright (C) 1995-1999 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PROCESSOR_H
+#define __ASM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+#include <asm/fpsimd.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#define STACK_TOP_MAX		TASK_SIZE_64
+#ifdef CONFIG_COMPAT
+#define AARCH32_VECTORS_BASE	0xffff0000
+#define STACK_TOP		(test_thread_flag(TIF_32BIT) ? \
+				AARCH32_VECTORS_BASE : STACK_TOP_MAX)
+#else
+#define STACK_TOP		STACK_TOP_MAX
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+
+struct debug_info {
+	/* Have we suspended stepping by a debugger? */
+	int			suspended_step;
+	/* Allow breakpoints and watchpoints to be disabled for this thread. */
+	int			bps_disabled;
+	int			wps_disabled;
+	/* Hardware breakpoints pinned to this task. */
+	struct perf_event	*hbp_break[ARM_MAX_BRP];
+	struct perf_event	*hbp_watch[ARM_MAX_WRP];
+};
+
+struct cpu_context {
+	unsigned long x19;
+	unsigned long x20;
+	unsigned long x21;
+	unsigned long x22;
+	unsigned long x23;
+	unsigned long x24;
+	unsigned long x25;
+	unsigned long x26;
+	unsigned long x27;
+	unsigned long x28;
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long pc;
+};
+
+struct thread_struct {
+	struct cpu_context	cpu_context;	/* cpu context */
+	unsigned long		tp_value;
+	struct fpsimd_state	fpsimd_state;
+	unsigned long		fault_address;	/* fault info */
+	struct debug_info	debug;		/* debugging */
+};
+
+#define INIT_THREAD  {	}
+
+static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
+{
+	memset(regs, 0, sizeof(*regs));
+	regs->syscallno = ~0UL;
+	regs->pc = pc;
+}
+
+static inline void start_thread(struct pt_regs *regs, unsigned long pc,
+				unsigned long sp)
+{
+	unsigned long *stack = (unsigned long *)sp;
+
+	start_thread_common(regs, pc);
+	regs->pstate = PSR_MODE_EL0t;
+	regs->sp = sp;
+	regs->regs[2] = stack[2];	/* x2 (envp) */
+	regs->regs[1] = stack[1];	/* x1 (argv) */
+	regs->regs[0] = stack[0];	/* x0 (argc) */
+}
+
+#ifdef CONFIG_COMPAT
+static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
+				       unsigned long sp)
+{
+	unsigned int *stack = (unsigned int *)sp;
+
+	start_thread_common(regs, pc);
+	regs->pstate = COMPAT_PSR_MODE_USR;
+	if (pc & 1)
+		regs->pstate |= COMPAT_PSR_T_BIT;
+	regs->compat_sp = sp;
+	regs->regs[2] = stack[2];	/* x2 (envp) */
+	regs->regs[1] = stack[1];	/* x1 (argv) */
+	regs->regs[0] = stack[0];	/* x0 (argc) */
+}
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/* Thread switching */
+extern struct task_struct *cpu_switch_to(struct task_struct *prev,
+					 struct task_struct *next);
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	task_pt_regs(tsk)->pc
+#define KSTK_ESP(tsk)	task_pt_regs(tsk)->sp
+
+/*
+ * Prefetching support
+ */
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *ptr)
+{
+	asm volatile("prfm pldl1keep, %a0\n" : : "p" (ptr));
+}
+
+#define ARCH_HAS_PREFETCHW
+static inline void prefetchw(const void *ptr)
+{
+	asm volatile("prfm pstl1keep, %a0\n" : : "p" (ptr));
+}
+
+#define ARCH_HAS_SPINLOCK_PREFETCH
+static inline void spin_lock_prefetch(const void *x)
+{
+	prefetchw(x);
+}
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif
+
+#endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/prom.h b/arch/arm64/include/asm/prom.h
new file mode 100644
index 000000000000..68b90e682957
--- /dev/null
+++ b/arch/arm64/include/asm/prom.h
@@ -0,0 +1 @@
+/* Empty for now */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
new file mode 100644
index 000000000000..0fa5d6c9ef76
--- /dev/null
+++ b/arch/arm64/include/asm/ptrace.h
@@ -0,0 +1,207 @@
+/*
+ * Based on arch/arm/include/asm/ptrace.h
+ *
+ * Copyright (C) 1996-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PTRACE_H
+#define __ASM_PTRACE_H
+
+#include <linux/types.h>
+
+#include <asm/hwcap.h>
+
+/* AArch32-specific ptrace requests */
+#define COMPAT_PTRACE_GETREGS		12
+#define COMPAT_PTRACE_SETREGS		13
+#define COMPAT_PTRACE_GET_THREAD_AREA	22
+#define COMPAT_PTRACE_SET_SYSCALL	23
+#define COMPAT_PTRACE_GETVFPREGS	27
+#define COMPAT_PTRACE_SETVFPREGS	28
+#define COMPAT_PTRACE_GETHBPREGS	29
+#define COMPAT_PTRACE_SETHBPREGS	30
+
+/*
+ * PSR bits
+ */
+#define PSR_MODE_EL0t	0x00000000
+#define PSR_MODE_EL1t	0x00000004
+#define PSR_MODE_EL1h	0x00000005
+#define PSR_MODE_EL2t	0x00000008
+#define PSR_MODE_EL2h	0x00000009
+#define PSR_MODE_EL3t	0x0000000c
+#define PSR_MODE_EL3h	0x0000000d
+#define PSR_MODE_MASK	0x0000000f
+
+/* AArch32 CPSR bits */
+#define PSR_MODE32_BIT		0x00000010
+#define COMPAT_PSR_MODE_USR	0x00000010
+#define COMPAT_PSR_T_BIT	0x00000020
+#define COMPAT_PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+
+/* AArch64 SPSR bits */
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_D_BIT	0x00000200
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+/*
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
+#ifndef __ASSEMBLY__
+
+/*
+ * User structures for general purpose, floating point and debug registers.
+ */
+struct user_pt_regs {
+	__u64		regs[31];
+	__u64		sp;
+	__u64		pc;
+	__u64		pstate;
+};
+
+struct user_fpsimd_state {
+	__uint128_t	vregs[32];
+	__u32		fpsr;
+	__u32		fpcr;
+};
+
+struct user_hwdebug_state {
+	__u32		dbg_info;
+	struct {
+		__u64	addr;
+		__u32	ctrl;
+	}		dbg_regs[16];
+};
+
+#ifdef __KERNEL__
+
+/* sizeof(struct user) for AArch32 */
+#define COMPAT_USER_SZ	296
+/* AArch32 uses x13 as the stack pointer... */
+#define compat_sp	regs[13]
+/* ... and x14 as the link register. */
+#define compat_lr	regs[14]
+
+/*
+ * This struct defines the way the registers are stored on the stack during an
+ * exception. Note that sizeof(struct pt_regs) has to be a multiple of 16 (for
+ * stack alignment). struct user_pt_regs must form a prefix of struct pt_regs.
+ */
+struct pt_regs {
+	union {
+		struct user_pt_regs user_regs;
+		struct {
+			u64 regs[31];
+			u64 sp;
+			u64 pc;
+			u64 pstate;
+		};
+	};
+	u64 orig_x0;
+	u64 syscallno;
+};
+
+#define arch_has_single_step()	(1)
+
+#ifdef CONFIG_COMPAT
+#define compat_thumb_mode(regs) \
+	(((regs)->pstate & COMPAT_PSR_T_BIT))
+#else
+#define compat_thumb_mode(regs) (0)
+#endif
+
+#define user_mode(regs)	\
+	(((regs)->pstate & PSR_MODE_MASK) == PSR_MODE_EL0t)
+
+#define compat_user_mode(regs)	\
+	(((regs)->pstate & (PSR_MODE32_BIT | PSR_MODE_MASK)) == \
+	 (PSR_MODE32_BIT | PSR_MODE_EL0t))
+
+#define processor_mode(regs) \
+	((regs)->pstate & PSR_MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->pstate & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->pstate & PSR_F_BIT))
+
+#define user_stack_pointer(regs) \
+	((regs)->sp)
+
+/*
+ * Are the current registers suitable for user mode? (used to maintain
+ * security in signal handlers)
+ */
+static inline int valid_user_regs(struct user_pt_regs *regs)
+{
+	if (user_mode(regs) && (regs->pstate & PSR_I_BIT) == 0) {
+		regs->pstate &= ~(PSR_F_BIT | PSR_A_BIT);
+
+		/* The T bit is reserved for AArch64 */
+		if (!(regs->pstate & PSR_MODE32_BIT))
+			regs->pstate &= ~COMPAT_PSR_T_BIT;
+
+		return 1;
+	}
+
+	/*
+	 * Force PSR to something logical...
+	 */
+	regs->pstate &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | \
+			COMPAT_PSR_T_BIT | PSR_MODE32_BIT;
+
+	if (!(regs->pstate & PSR_MODE32_BIT)) {
+		regs->pstate &= ~COMPAT_PSR_T_BIT;
+		regs->pstate |= PSR_MODE_EL0t;
+	}
+
+	return 0;
+}
+
+#define instruction_pointer(regs)	(regs)->pc
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+extern int aarch32_break_trap(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h
new file mode 100644
index 000000000000..9cf2e46fbbdf
--- /dev/null
+++ b/arch/arm64/include/asm/setup.h
@@ -0,0 +1,26 @@
+/*
+ * Based on arch/arm/include/asm/setup.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SETUP_H
+#define __ASM_SETUP_H
+
+#include <linux/types.h>
+
+#define COMMAND_LINE_SIZE	2048
+
+#endif
diff --git a/arch/arm64/include/asm/shmparam.h b/arch/arm64/include/asm/shmparam.h
new file mode 100644
index 000000000000..4df608a8459e
--- /dev/null
+++ b/arch/arm64/include/asm/shmparam.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SHMPARAM_H
+#define __ASM_SHMPARAM_H
+
+/*
+ * For IPC syscalls from compat tasks, we need to use the legacy 16k
+ * alignment value. Since we don't have aliasing D-caches, the rest of
+ * the time we can safely use PAGE_SIZE.
+ */
+#define COMPAT_SHMLBA	0x4000
+
+#include <asm-generic/shmparam.h>
+
+#endif /* __ASM_SHMPARAM_H */
diff --git a/arch/arm64/include/asm/sigcontext.h b/arch/arm64/include/asm/sigcontext.h
new file mode 100644
index 000000000000..573cec778819
--- /dev/null
+++ b/arch/arm64/include/asm/sigcontext.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SIGCONTEXT_H
+#define __ASM_SIGCONTEXT_H
+
+#include <linux/types.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.
+ */
+struct sigcontext {
+	__u64 fault_address;
+	/* AArch64 registers */
+	__u64 regs[31];
+	__u64 sp;
+	__u64 pc;
+	__u64 pstate;
+	/* 4K reserved for FP/SIMD state and future expansion */
+	__u8 __reserved[4096] __attribute__((__aligned__(16)));
+};
+
+/*
+ * Header to be used at the beginning of structures extending the user
+ * context. Such structures must be placed after the rt_sigframe on the stack
+ * and be 16-byte aligned. The last structure must be a dummy one with the
+ * magic and size set to 0.
+ */
+struct _aarch64_ctx {
+	__u32 magic;
+	__u32 size;
+};
+
+#define FPSIMD_MAGIC	0x46508001
+
+struct fpsimd_context {
+	struct _aarch64_ctx head;
+	__u32 fpsr;
+	__u32 fpcr;
+	__uint128_t vregs[32];
+};
+
+#ifdef __KERNEL__
+/*
+ * Auxiliary context saved in the sigcontext.__reserved array. Not exported to
+ * user space as it will change with the addition of new context. User space
+ * should check the magic/size information.
+ */
+struct aux_context {
+	struct fpsimd_context fpsimd;
+	/* additional context to be added before "end" */
+	struct _aarch64_ctx end;
+};
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/siginfo.h b/arch/arm64/include/asm/siginfo.h
new file mode 100644
index 000000000000..5a74a0853db0
--- /dev/null
+++ b/arch/arm64/include/asm/siginfo.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SIGINFO_H
+#define __ASM_SIGINFO_H
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/arm64/include/asm/signal.h b/arch/arm64/include/asm/signal.h
new file mode 100644
index 000000000000..8d1e7236431b
--- /dev/null
+++ b/arch/arm64/include/asm/signal.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SIGNAL_H
+#define __ASM_SIGNAL_H
+
+/* Required for AArch32 compatibility. */
+#define SA_RESTORER	0x04000000
+
+#include <asm-generic/signal.h>
+
+#endif
diff --git a/arch/arm64/include/asm/signal32.h b/arch/arm64/include/asm/signal32.h
new file mode 100644
index 000000000000..7c275e3b640f
--- /dev/null
+++ b/arch/arm64/include/asm/signal32.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SIGNAL32_H
+#define __ASM_SIGNAL32_H
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+#define AARCH32_KERN_SIGRET_CODE_OFFSET	0x500
+
+extern const compat_ulong_t aarch32_sigret_code[6];
+
+int compat_setup_frame(int usig, struct k_sigaction *ka, sigset_t *set,
+		       struct pt_regs *regs);
+int compat_setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
+			  sigset_t *set, struct pt_regs *regs);
+
+void compat_setup_restart_syscall(struct pt_regs *regs);
+#else
+
+static inline int compat_setup_frame(int usid, struct k_sigaction *ka,
+				     sigset_t *set, struct pt_regs *regs)
+{
+	return -ENOSYS;
+}
+
+static inline int compat_setup_rt_frame(int usig, struct k_sigaction *ka,
+					siginfo_t *info, sigset_t *set,
+					struct pt_regs *regs)
+{
+	return -ENOSYS;
+}
+
+static inline void compat_setup_restart_syscall(struct pt_regs *regs)
+{
+}
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SIGNAL32_H */
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
new file mode 100644
index 000000000000..7e34295f78e3
--- /dev/null
+++ b/arch/arm64/include/asm/smp.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/thread_info.h>
+
+#ifndef CONFIG_SMP
+# error "<asm/smp.h> included in non-SMP build"
+#endif
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+struct seq_file;
+
+/*
+ * generate IPI list text
+ */
+extern void show_ipi_list(struct seq_file *p, int prec);
+
+/*
+ * Called from C code, this handles an IPI.
+ */
+extern void handle_IPI(int ipinr, struct pt_regs *regs);
+
+/*
+ * Setup the set of possible CPUs (via set_cpu_possible)
+ */
+extern void smp_init_cpus(void);
+
+/*
+ * Provide a function to raise an IPI cross call on CPUs in callmap.
+ */
+extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
+
+/*
+ * Called from the secondary holding pen, this is the secondary CPU entry point.
+ */
+asmlinkage void secondary_start_kernel(void);
+
+/*
+ * Initial data for bringing up a secondary CPU.
+ */
+struct secondary_data {
+	void *stack;
+};
+extern struct secondary_data secondary_data;
+extern void secondary_holding_pen(void);
+extern volatile unsigned long secondary_holding_pen_release;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+#endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
new file mode 100644
index 000000000000..1be62bcb9d47
--- /dev/null
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SPARSEMEM_H
+#define __ASM_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+#define MAX_PHYSMEM_BITS	40
+#define SECTION_SIZE_BITS	30
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
new file mode 100644
index 000000000000..41112fe2f8b1
--- /dev/null
+++ b/arch/arm64/include/asm/spinlock.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/spinlock_types.h>
+#include <asm/processor.h>
+
+/*
+ * Spinlock implementation.
+ *
+ * The old value is read exclusively and the new one, if unlocked, is written
+ * exclusively. In case of failure, the loop is restarted.
+ *
+ * The memory barriers are implicit with the load-acquire and store-release
+ * instructions.
+ *
+ * Unlocked value: 0
+ * Locked value: 1
+ */
+
+#define arch_spin_is_locked(x)		((x)->lock != 0)
+#define arch_spin_unlock_wait(lock) \
+	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned int tmp;
+
+	asm volatile(
+	"	sevl\n"
+	"1:	wfe\n"
+	"2:	ldaxr	%w0, [%1]\n"
+	"	cbnz	%w0, 1b\n"
+	"	stxr	%w0, %w2, [%1]\n"
+	"	cbnz	%w0, 2b\n"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "memory");
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned int tmp;
+
+	asm volatile(
+	"	ldaxr	%w0, [%1]\n"
+	"	cbnz	%w0, 1f\n"
+	"	stxr	%w0, %w2, [%1]\n"
+	"1:\n"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "memory");
+
+	return !tmp;
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	asm volatile(
+	"	stlr	%w1, [%0]\n"
+	: : "r" (&lock->lock), "r" (0) : "memory");
+}
+
+/*
+ * Write lock implementation.
+ *
+ * Write locks set bit 31. Unlocking, is done by writing 0 since the lock is
+ * exclusively held.
+ *
+ * The memory barriers are implicit with the load-acquire and store-release
+ * instructions.
+ */
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	asm volatile(
+	"	sevl\n"
+	"1:	wfe\n"
+	"2:	ldaxr	%w0, [%1]\n"
+	"	cbnz	%w0, 1b\n"
+	"	stxr	%w0, %w2, [%1]\n"
+	"	cbnz	%w0, 2b\n"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "memory");
+}
+
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	unsigned int tmp;
+
+	asm volatile(
+	"	ldaxr	%w0, [%1]\n"
+	"	cbnz	%w0, 1f\n"
+	"	stxr	%w0, %w2, [%1]\n"
+	"1:\n"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "memory");
+
+	return !tmp;
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	asm volatile(
+	"	stlr	%w1, [%0]\n"
+	: : "r" (&rw->lock), "r" (0) : "memory");
+}
+
+/* write_can_lock - would write_trylock() succeed? */
+#define arch_write_can_lock(x)		((x)->lock == 0)
+
+/*
+ * Read lock implementation.
+ *
+ * It exclusively loads the lock value, increments it and stores the new value
+ * back if positive and the CPU still exclusively owns the location. If the
+ * value is negative, the lock is already held.
+ *
+ * During unlocking there may be multiple active read locks but no write lock.
+ *
+ * The memory barriers are implicit with the load-acquire and store-release
+ * instructions.
+ */
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	unsigned int tmp, tmp2;
+
+	asm volatile(
+	"	sevl\n"
+	"1:	wfe\n"
+	"2:	ldaxr	%w0, [%2]\n"
+	"	add	%w0, %w0, #1\n"
+	"	tbnz	%w0, #31, 1b\n"
+	"	stxr	%w1, %w0, [%2]\n"
+	"	cbnz	%w1, 2b\n"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "memory");
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned int tmp, tmp2;
+
+	asm volatile(
+	"1:	ldxr	%w0, [%2]\n"
+	"	sub	%w0, %w0, #1\n"
+	"	stlxr	%w1, %w0, [%2]\n"
+	"	cbnz	%w1, 1b\n"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "memory");
+}
+
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	unsigned int tmp, tmp2 = 1;
+
+	asm volatile(
+	"	ldaxr	%w0, [%2]\n"
+	"	add	%w0, %w0, #1\n"
+	"	tbnz	%w0, #31, 1f\n"
+	"	stxr	%w1, %w0, [%2]\n"
+	"1:\n"
+	: "=&r" (tmp), "+r" (tmp2)
+	: "r" (&rw->lock)
+	: "memory");
+
+	return !tmp2;
+}
+
+/* read_can_lock - would read_trylock() succeed? */
+#define arch_read_can_lock(x)		((x)->lock < 0x80000000)
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#define arch_spin_relax(lock)	cpu_relax()
+#define arch_read_relax(lock)	cpu_relax()
+#define arch_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arm64/include/asm/spinlock_types.h b/arch/arm64/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..9a494346efed
--- /dev/null
+++ b/arch/arm64/include/asm/spinlock_types.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#if !defined(__LINUX_SPINLOCK_TYPES_H) && !defined(__ASM_SPINLOCK_H)
+# error "please don't include this file directly"
+#endif
+
+/* We only require natural alignment for exclusive accesses. */
+#define __lock_aligned
+
+typedef struct {
+	volatile unsigned int lock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
new file mode 100644
index 000000000000..7318f6d54aa9
--- /dev/null
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long pc;
+};
+
+extern int unwind_frame(struct stackframe *frame);
+extern void walk_stackframe(struct stackframe *frame,
+			    int (*fn)(struct stackframe *, void *), void *data);
+
+#endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm64/include/asm/stat.h b/arch/arm64/include/asm/stat.h
new file mode 100644
index 000000000000..a9f580c28f7b
--- /dev/null
+++ b/arch/arm64/include/asm/stat.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_STAT_H
+#define __ASM_STAT_H
+
+#include <asm-generic/stat.h>
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+#include <asm/compat.h>
+
+/*
+ * struct stat64 is needed for compat tasks only. Its definition is different
+ * from the generic struct stat64.
+ */
+struct stat64 {
+	compat_u64	st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	compat_ulong_t	__st_ino;
+	compat_uint_t	st_mode;
+	compat_uint_t	st_nlink;
+
+	compat_ulong_t	st_uid;
+	compat_ulong_t	st_gid;
+
+	compat_u64	st_rdev;
+	unsigned char   __pad3[4];
+
+	compat_s64	st_size;
+	compat_ulong_t	st_blksize;
+	compat_u64	st_blocks;	/* Number of 512-byte blocks allocated. */
+
+	compat_ulong_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+
+	compat_ulong_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+
+	compat_ulong_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+
+	compat_u64	st_ino;
+};
+
+#endif
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/statfs.h b/arch/arm64/include/asm/statfs.h
new file mode 100644
index 000000000000..6f6219050978
--- /dev/null
+++ b/arch/arm64/include/asm/statfs.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_STATFS_H
+#define __ASM_STATFS_H
+
+#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
new file mode 100644
index 000000000000..89c047f9a971
--- /dev/null
+++ b/arch/arm64/include/asm/syscall.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SYSCALL_H
+#define __ASM_SYSCALL_H
+
+#include <linux/err.h>
+
+
+static inline int syscall_get_nr(struct task_struct *task,
+				 struct pt_regs *regs)
+{
+	return regs->syscallno;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->regs[0] = regs->orig_x0;
+}
+
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->regs[0];
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->regs[0] = (long) error ? error : val;
+}
+
+#define SYSCALL_MAX_ARGS 6
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	if (i + n > SYSCALL_MAX_ARGS) {
+		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
+		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
+		pr_warning("%s called with max args %d, handling only %d\n",
+			   __func__, i + n, SYSCALL_MAX_ARGS);
+		memset(args_bad, 0, n_bad * sizeof(args[0]));
+	}
+
+	if (i == 0) {
+		args[0] = regs->orig_x0;
+		args++;
+		i++;
+		n--;
+	}
+
+	memcpy(args, &regs->regs[i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	if (i + n > SYSCALL_MAX_ARGS) {
+		pr_warning("%s called with max args %d, handling only %d\n",
+			   __func__, i + n, SYSCALL_MAX_ARGS);
+		n = SYSCALL_MAX_ARGS - i;
+	}
+
+	if (i == 0) {
+		regs->orig_x0 = args[0];
+		args++;
+		i++;
+		n--;
+	}
+
+	memcpy(&regs->regs[i], args, n * sizeof(args[0]));
+}
+
+#endif	/* __ASM_SYSCALL_H */
diff --git a/arch/arm64/include/asm/syscalls.h b/arch/arm64/include/asm/syscalls.h
new file mode 100644
index 000000000000..09ff33572aab
--- /dev/null
+++ b/arch/arm64/include/asm/syscalls.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SYSCALLS_H
+#define __ASM_SYSCALLS_H
+
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+#include <linux/signal.h>
+
+/*
+ * System call wrappers implemented in kernel/entry.S.
+ */
+asmlinkage long sys_execve_wrapper(const char __user *filename,
+				   const char __user *const __user *argv,
+				   const char __user *const __user *envp);
+asmlinkage long sys_clone_wrapper(unsigned long clone_flags,
+				  unsigned long newsp,
+				  void __user *parent_tid,
+				  unsigned long tls_val,
+				  void __user *child_tid);
+asmlinkage long sys_rt_sigreturn_wrapper(void);
+asmlinkage long sys_sigaltstack_wrapper(const stack_t __user *uss,
+					stack_t __user *uoss);
+
+#include <asm-generic/syscalls.h>
+
+#endif	/* __ASM_SYSCALLS_H */
diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
new file mode 100644
index 000000000000..95e407255347
--- /dev/null
+++ b/arch/arm64/include/asm/system_misc.h
@@ -0,0 +1,54 @@
+/*
+ * Based on arch/arm/include/asm/system_misc.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SYSTEM_MISC_H
+#define __ASM_SYSTEM_MISC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/irqflags.h>
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err);
+
+struct siginfo;
+void arm64_notify_die(const char *str, struct pt_regs *regs,
+		      struct siginfo *info, int err);
+
+void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+					     struct pt_regs *),
+			   int sig, int code, const char *name);
+
+struct mm_struct;
+extern void show_pte(struct mm_struct *mm, unsigned long addr);
+extern void __show_regs(struct pt_regs *);
+
+void soft_restart(unsigned long);
+extern void (*pm_restart)(const char *cmd);
+
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_SYSTEM_MISC_H */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
new file mode 100644
index 000000000000..3659e460071d
--- /dev/null
+++ b/arch/arm64/include/asm/thread_info.h
@@ -0,0 +1,127 @@
+/*
+ * Based on arch/arm/include/asm/thread_info.h
+ *
+ * Copyright (C) 2002 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_THREAD_INFO_H
+#define __ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+
+#ifndef CONFIG_ARM64_64K_PAGES
+#define THREAD_SIZE_ORDER	1
+#endif
+
+#define THREAD_SIZE		8192
+#define THREAD_START_SP		(THREAD_SIZE - 16)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/types.h>
+
+typedef unsigned long mm_segment_t;
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	struct restart_block	restart_block;
+	int			preempt_count;	/* 0 => preemptable, <0 => bug */
+	int			cpu;		/* cpu */
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
+	.addr_limit	= KERNEL_DS,					\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall,			\
+	},								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(tsk->thread.cpu_context.pc))
+#define thread_saved_sp(tsk)	\
+	((unsigned long)(tsk->thread.cpu_context.sp))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)(tsk->thread.cpu_context.fp))
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occurring.  See <asm/hardirq.h>.
+ */
+#define PREEMPT_ACTIVE	0x40000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_NOTIFY_RESUME	- callback before returning to user
+ *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
+ *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_SIGPENDING		0
+#define TIF_NEED_RESCHED	1
+#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
+#define TIF_SYSCALL_TRACE	8
+#define TIF_POLLING_NRFLAG	16
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
+#define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
+#define TIF_SINGLESTEP		21
+#define TIF_32BIT		22	/* 32bit process */
+#define TIF_SWITCH_MM		23	/* deferred switch_mm */
+
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_32BIT		(1 << TIF_32BIT)
+
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+				 _TIF_NOTIFY_RESUME)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/include/asm/timex.h b/arch/arm64/include/asm/timex.h
new file mode 100644
index 000000000000..b24a31a7e2c9
--- /dev/null
+++ b/arch/arm64/include/asm/timex.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_TIMEX_H
+#define __ASM_TIMEX_H
+
+/*
+ * Use the current timer as a cycle counter since this is what we use for
+ * the delay loop.
+ */
+#define get_cycles()	({ cycles_t c; read_current_timer(&c); c; })
+
+#include <asm-generic/timex.h>
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h
new file mode 100644
index 000000000000..654f0968030b
--- /dev/null
+++ b/arch/arm64/include/asm/tlb.h
@@ -0,0 +1,190 @@
+/*
+ * Based on arch/arm/include/asm/tlb.h
+ *
+ * Copyright (C) 2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_TLB_H
+#define __ASM_TLB_H
+
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define MMU_GATHER_BUNDLE	8
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		fullmm;
+	struct vm_area_struct	*vma;
+	unsigned long		range_start;
+	unsigned long		range_end;
+	unsigned int		nr;
+	unsigned int		max;
+	struct page		**pages;
+	struct page		*local[MMU_GATHER_BUNDLE];
+};
+
+/*
+ * This is unnecessarily complex.  There's three ways the TLB shootdown
+ * code is used:
+ *  1. Unmapping a range of vmas.  See zap_page_range(), unmap_region().
+ *     tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
+ *     tlb->vma will be non-NULL.
+ *  2. Unmapping all vmas.  See exit_mmap().
+ *     tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
+ *     tlb->vma will be non-NULL.  Additionally, page tables will be freed.
+ *  3. Unmapping argument pages.  See shift_arg_pages().
+ *     tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
+ *     tlb->vma will be NULL.
+ */
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	if (tlb->fullmm || !tlb->vma)
+		flush_tlb_mm(tlb->mm);
+	else if (tlb->range_end > 0) {
+		flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
+}
+
+static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
+
+static inline void __tlb_alloc_page(struct mmu_gather *tlb)
+{
+	unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
+
+	if (addr) {
+		tlb->pages = (void *)addr;
+		tlb->max = PAGE_SIZE / sizeof(struct page *);
+	}
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+	tlb_flush(tlb);
+	free_pages_and_swap_cache(tlb->pages, tlb->nr);
+	tlb->nr = 0;
+	if (tlb->pages == tlb->local)
+		__tlb_alloc_page(tlb);
+}
+
+static inline void
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
+{
+	tlb->mm = mm;
+	tlb->fullmm = fullmm;
+	tlb->vma = NULL;
+	tlb->max = ARRAY_SIZE(tlb->local);
+	tlb->pages = tlb->local;
+	tlb->nr = 0;
+	__tlb_alloc_page(tlb);
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(tlb);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	if (tlb->pages != tlb->local)
+		free_pages((unsigned long)tlb->pages, 0);
+}
+
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+	tlb_add_flush(tlb, addr);
+}
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm) {
+		tlb->vma = vma;
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		tlb_flush(tlb);
+}
+
+static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	tlb->pages[tlb->nr++] = page;
+	VM_BUG_ON(tlb->nr > tlb->max);
+	return tlb->max - tlb->nr;
+}
+
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	if (!__tlb_remove_page(tlb, page))
+		tlb_flush_mmu(tlb);
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+	unsigned long addr)
+{
+	pgtable_page_dtor(pte);
+	tlb_add_flush(tlb, addr);
+	tlb_remove_page(tlb, pte);
+}
+
+#ifndef CONFIG_ARM64_64K_PAGES
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+				  unsigned long addr)
+{
+	tlb_add_flush(tlb, addr);
+	tlb_remove_page(tlb, virt_to_page(pmdp));
+}
+#endif
+
+#define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
+#define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#endif
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
new file mode 100644
index 000000000000..122d6320f745
--- /dev/null
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -0,0 +1,122 @@
+/*
+ * Based on arch/arm/include/asm/tlbflush.h
+ *
+ * Copyright (C) 1999-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_TLBFLUSH_H
+#define __ASM_TLBFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <asm/cputype.h>
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/arm64/mm/tlb.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it needs
+ *	to determine if it should invalidate the TLB for each call.  Start
+ *	addresses are inclusive and end addresses are exclusive; it is safe to
+ *	round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+static inline void flush_tlb_all(void)
+{
+	dsb();
+	asm("tlbi	vmalle1is");
+	dsb();
+	isb();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	unsigned long asid = (unsigned long)ASID(mm) << 48;
+
+	dsb();
+	asm("tlbi	aside1is, %0" : : "r" (asid));
+	dsb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long uaddr)
+{
+	unsigned long addr = uaddr >> 12 |
+		((unsigned long)ASID(vma->vm_mm) << 48);
+
+	dsb();
+	asm("tlbi	vae1is, %0" : : "r" (addr));
+	dsb();
+}
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+
+/*
+ * On AArch64, the cache coherency is handled via the set_pte_at() function.
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep)
+{
+	/*
+	 * set_pte() does not have a DSB, so make sure that the page table
+	 * write is visible.
+	 */
+	dsb();
+}
+
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
new file mode 100644
index 000000000000..10ca8ff93cc2
--- /dev/null
+++ b/arch/arm64/include/asm/traps.h
@@ -0,0 +1,30 @@
+/*
+ * Based on arch/arm/include/asm/traps.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_TRAP_H
+#define __ASM_TRAP_H
+
+static inline int in_exception_text(unsigned long ptr)
+{
+	extern char __exception_text_start[];
+	extern char __exception_text_end[];
+
+	return ptr >= (unsigned long)&__exception_text_start &&
+	       ptr < (unsigned long)&__exception_text_end;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
new file mode 100644
index 000000000000..008f8481da65
--- /dev/null
+++ b/arch/arm64/include/asm/uaccess.h
@@ -0,0 +1,297 @@
+/*
+ * Based on arch/arm/include/asm/uaccess.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_UACCESS_H
+#define __ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/string.h>
+#include <linux/thread_info.h>
+
+#include <asm/ptrace.h>
+#include <asm/errno.h>
+#include <asm/memory.h>
+#include <asm/compiler.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#define KERNEL_DS	(-1UL)
+#define get_ds()	(KERNEL_DS)
+
+#define USER_DS		TASK_SIZE_64
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+}
+
+#define segment_eq(a,b)	((a) == (b))
+
+/*
+ * Return 1 if addr < current->addr_limit, 0 otherwise.
+ */
+#define __addr_ok(addr)							\
+({									\
+	unsigned long flag;						\
+	asm("cmp %1, %0; cset %0, lo"					\
+		: "=&r" (flag)						\
+		: "r" (addr), "0" (current_thread_info()->addr_limit)	\
+		: "cc");						\
+	flag;								\
+})
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 1 if the range is valid, 0 otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u65)addr + (u65)size < (u65)current->addr_limit
+ *
+ * This needs 65-bit arithmetic.
+ */
+#define __range_ok(addr, size)						\
+({									\
+	unsigned long flag, roksum;					\
+	__chk_user_ptr(addr);						\
+	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, cc"		\
+		: "=&r" (flag), "=&r" (roksum)				\
+		: "1" (addr), "Ir" (size),				\
+		  "r" (current_thread_info()->addr_limit)		\
+		: "cc");						\
+	flag;								\
+})
+
+#define access_ok(type, addr, size)	__range_ok(addr, size)
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the address
+ * space - it must have been done previously with a separate "access_ok()"
+ * call.
+ *
+ * The "__xxx_error" versions set the third argument to -EFAULT if an error
+ * occurs, and leave it unchanged on success.
+ */
+#define __get_user_asm(instr, reg, x, addr, err)			\
+	asm volatile(							\
+	"1:	" instr "	" reg "1, [%2]\n"			\
+	"2:\n"								\
+	"	.section .fixup, \"ax\"\n"				\
+	"	.align	2\n"						\
+	"3:	mov	%w0, %3\n"					\
+	"	mov	%1, #0\n"					\
+	"	b	2b\n"						\
+	"	.previous\n"						\
+	"	.section __ex_table,\"a\"\n"				\
+	"	.align	3\n"						\
+	"	.quad	1b, 3b\n"					\
+	"	.previous"						\
+	: "+r" (err), "=&r" (x)						\
+	: "r" (addr), "i" (-EFAULT))
+
+#define __get_user_err(x, ptr, err)					\
+do {									\
+	unsigned long __gu_val;						\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_asm("ldrb", "%w", __gu_val, (ptr), (err));	\
+		break;							\
+	case 2:								\
+		__get_user_asm("ldrh", "%w", __gu_val, (ptr), (err));	\
+		break;							\
+	case 4:								\
+		__get_user_asm("ldr", "%w", __gu_val, (ptr), (err));	\
+		break;							\
+	case 8:								\
+		__get_user_asm("ldr", "%",  __gu_val, (ptr), (err));	\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+} while (0)
+
+#define __get_user(x, ptr)						\
+({									\
+	int __gu_err = 0;						\
+	__get_user_err((x), (ptr), __gu_err);				\
+	__gu_err;							\
+})
+
+#define __get_user_error(x, ptr, err)					\
+({									\
+	__get_user_err((x), (ptr), (err));				\
+	(void)0;							\
+})
+
+#define __get_user_unaligned __get_user
+
+#define get_user(x, ptr)						\
+({									\
+	might_sleep();							\
+	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ?			\
+		__get_user((x), (ptr)) :				\
+		((x) = 0, -EFAULT);					\
+})
+
+#define __put_user_asm(instr, reg, x, addr, err)			\
+	asm volatile(							\
+	"1:	" instr "	" reg "1, [%2]\n"			\
+	"2:\n"								\
+	"	.section .fixup,\"ax\"\n"				\
+	"	.align	2\n"						\
+	"3:	mov	%w0, %3\n"					\
+	"	b	2b\n"						\
+	"	.previous\n"						\
+	"	.section __ex_table,\"a\"\n"				\
+	"	.align	3\n"						\
+	"	.quad	1b, 3b\n"					\
+	"	.previous"						\
+	: "+r" (err)							\
+	: "r" (x), "r" (addr), "i" (-EFAULT))
+
+#define __put_user_err(x, ptr, err)					\
+do {									\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__put_user_asm("strb", "%w", __pu_val, (ptr), (err));	\
+		break;							\
+	case 2:								\
+		__put_user_asm("strh", "%w", __pu_val, (ptr), (err));	\
+		break;							\
+	case 4:								\
+		__put_user_asm("str",  "%w", __pu_val, (ptr), (err));	\
+		break;							\
+	case 8:								\
+		__put_user_asm("str",  "%", __pu_val, (ptr), (err));	\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+} while (0)
+
+#define __put_user(x, ptr)						\
+({									\
+	int __pu_err = 0;						\
+	__put_user_err((x), (ptr), __pu_err);				\
+	__pu_err;							\
+})
+
+#define __put_user_error(x, ptr, err)					\
+({									\
+	__put_user_err((x), (ptr), (err));				\
+	(void)0;							\
+})
+
+#define __put_user_unaligned __put_user
+
+#define put_user(x, ptr)						\
+({									\
+	might_sleep();							\
+	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ?		\
+		__put_user((x), (ptr)) :				\
+		-EFAULT;						\
+})
+
+extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_in_user(void __user *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+
+extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
+
+static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else /* security hole - plug it */
+		memset(to, 0, n);
+	return n;
+}
+
+static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+static inline unsigned long __must_check copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n))
+		n = __copy_in_user(to, from, n);
+	return n;
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __clear_user(to, n);
+	return n;
+}
+
+static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		res = __strncpy_from_user(dst, src, count);
+	return res;
+}
+
+#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
+
+static inline long __must_check strnlen_user(const char __user *s, long n)
+{
+	unsigned long res = 0;
+
+	if (__addr_ok(s))
+		res = __strnlen_user(s, n);
+
+	return res;
+}
+
+#endif /* __ASM_UACCESS_H */
diff --git a/arch/arm64/include/asm/ucontext.h b/arch/arm64/include/asm/ucontext.h
new file mode 100644
index 000000000000..bde960720892
--- /dev/null
+++ b/arch/arm64/include/asm/ucontext.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_UCONTEXT_H
+#define __ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext	 *uc_link;
+	stack_t		  uc_stack;
+	sigset_t	  uc_sigmask;
+	/* glibc uses a 1024-bit sigset_t */
+	__u8		  __unused[(1024 - sizeof(sigset_t)) / 8];
+	/* last for future expansion */
+	struct sigcontext uc_mcontext;
+};
+
+#endif /* __ASM_UCONTEXT_H */
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
new file mode 100644
index 000000000000..8f03dee066ed
--- /dev/null
+++ b/arch/arm64/include/asm/unistd.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __SYSCALL_COMPAT
+#include <asm-generic/unistd.h>
+#endif
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+#include <asm/unistd32.h>
+#endif
+#endif
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
new file mode 100644
index 000000000000..3ba1f1a90629
--- /dev/null
+++ b/arch/arm64/include/asm/unistd32.h
@@ -0,0 +1,754 @@
+/*
+ * Based on arch/arm/include/asm/unistd.h
+ *
+ * Copyright (C) 2001-2005 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __SYSCALL
+#define __SYSCALL(x, y)
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#ifdef __SYSCALL_COMPAT
+
+#define __NR_restart_syscall		0
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_exit			1
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_fork			2
+__SYSCALL(__NR_fork, sys_fork)
+#define __NR_read			3
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write			4
+__SYSCALL(__NR_write, sys_write)
+#define __NR_open			5
+__SYSCALL(__NR_open, sys_open)
+#define __NR_close			6
+__SYSCALL(__NR_close, sys_close)
+__SYSCALL(7, sys_ni_syscall)		/* 7 was sys_waitpid */
+#define __NR_creat			8
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_link			9
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink			10
+__SYSCALL(__NR_unlink, sys_unlink)
+#define __NR_execve			11
+__SYSCALL(__NR_execve, sys_execve)
+#define __NR_chdir			12
+__SYSCALL(__NR_chdir, sys_chdir)
+__SYSCALL(13, sys_ni_syscall)		/* 13 was sys_time */
+#define __NR_mknod			14
+__SYSCALL(__NR_mknod, sys_mknod)
+#define __NR_chmod			15
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_lchown			16
+__SYSCALL(__NR_lchown, sys_lchown16)
+__SYSCALL(17, sys_ni_syscall)		/* 17 was sys_break */
+__SYSCALL(18, sys_ni_syscall)		/* 18 was sys_stat */
+#define __NR_lseek			19
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_getpid			20
+__SYSCALL(__NR_getpid, sys_getpid)
+#define __NR_mount			21
+__SYSCALL(__NR_mount, sys_mount)
+__SYSCALL(22, sys_ni_syscall)		/* 22 was sys_umount */
+#define __NR_setuid			23
+__SYSCALL(__NR_setuid, sys_setuid16)
+#define __NR_getuid			24
+__SYSCALL(__NR_getuid, sys_getuid16)
+__SYSCALL(25, sys_ni_syscall)		/* 25 was sys_stime */
+#define __NR_ptrace			26
+__SYSCALL(__NR_ptrace, sys_ptrace)
+__SYSCALL(27, sys_ni_syscall)		/* 27 was sys_alarm */
+__SYSCALL(28, sys_ni_syscall)		/* 28 was sys_fstat */
+#define __NR_pause			29
+__SYSCALL(__NR_pause, sys_pause)
+__SYSCALL(30, sys_ni_syscall)		/* 30 was sys_utime */
+__SYSCALL(31, sys_ni_syscall)		/* 31 was sys_stty */
+__SYSCALL(32, sys_ni_syscall)		/* 32 was sys_gtty */
+#define __NR_access			33
+__SYSCALL(__NR_access, sys_access)
+#define __NR_nice			34
+__SYSCALL(__NR_nice, sys_nice)
+__SYSCALL(35, sys_ni_syscall)		/* 35 was sys_ftime */
+#define __NR_sync			36
+__SYSCALL(__NR_sync, sys_sync)
+#define __NR_kill			37
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_rename			38
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_mkdir			39
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir			40
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_dup			41
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_pipe			42
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_times			43
+__SYSCALL(__NR_times, sys_times)
+__SYSCALL(44, sys_ni_syscall)		/* 44 was sys_prof */
+#define __NR_brk			45
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_setgid			46
+__SYSCALL(__NR_setgid, sys_setgid16)
+#define __NR_getgid			47
+__SYSCALL(__NR_getgid, sys_getgid16)
+__SYSCALL(48, sys_ni_syscall)		/* 48 was sys_signal */
+#define __NR_geteuid			49
+__SYSCALL(__NR_geteuid, sys_geteuid16)
+#define __NR_getegid			50
+__SYSCALL(__NR_getegid, sys_getegid16)
+#define __NR_acct			51
+__SYSCALL(__NR_acct, sys_acct)
+#define __NR_umount2			52
+__SYSCALL(__NR_umount2, sys_umount)
+__SYSCALL(53, sys_ni_syscall)		/* 53 was sys_lock */
+#define __NR_ioctl			54
+__SYSCALL(__NR_ioctl, sys_ioctl)
+#define __NR_fcntl			55
+__SYSCALL(__NR_fcntl, sys_fcntl)
+__SYSCALL(56, sys_ni_syscall)		/* 56 was sys_mpx */
+#define __NR_setpgid			57
+__SYSCALL(__NR_setpgid, sys_setpgid)
+__SYSCALL(58, sys_ni_syscall)		/* 58 was sys_ulimit */
+__SYSCALL(59, sys_ni_syscall)		/* 59 was sys_olduname */
+#define __NR_umask			60
+__SYSCALL(__NR_umask, sys_umask)
+#define __NR_chroot			61
+__SYSCALL(__NR_chroot, sys_chroot)
+#define __NR_ustat			62
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_dup2			63
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_getppid			64
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getpgrp			65
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+#define __NR_setsid			66
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_sigaction			67
+__SYSCALL(__NR_sigaction, sys_sigaction)
+__SYSCALL(68, sys_ni_syscall)		/* 68 was sys_sgetmask */
+__SYSCALL(69, sys_ni_syscall)		/* 69 was sys_ssetmask */
+#define __NR_setreuid			70
+__SYSCALL(__NR_setreuid, sys_setreuid16)
+#define __NR_setregid			71
+__SYSCALL(__NR_setregid, sys_setregid16)
+#define __NR_sigsuspend			72
+__SYSCALL(__NR_sigsuspend, sys_sigsuspend)
+#define __NR_sigpending			73
+__SYSCALL(__NR_sigpending, sys_sigpending)
+#define __NR_sethostname		74
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setrlimit			75
+__SYSCALL(__NR_setrlimit, sys_setrlimit)
+__SYSCALL(76, sys_ni_syscall)		/* 76 was sys_getrlimit */
+#define __NR_getrusage			77
+__SYSCALL(__NR_getrusage, sys_getrusage)
+#define __NR_gettimeofday		78
+__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
+#define __NR_settimeofday		79
+__SYSCALL(__NR_settimeofday, sys_settimeofday)
+#define __NR_getgroups			80
+__SYSCALL(__NR_getgroups, sys_getgroups16)
+#define __NR_setgroups			81
+__SYSCALL(__NR_setgroups, sys_setgroups16)
+__SYSCALL(82, sys_ni_syscall)		/* 82 was sys_select */
+#define __NR_symlink			83
+__SYSCALL(__NR_symlink, sys_symlink)
+__SYSCALL(84, sys_ni_syscall)		/* 84 was sys_lstat */
+#define __NR_readlink			85
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_uselib			86
+__SYSCALL(__NR_uselib, sys_uselib)
+#define __NR_swapon			87
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_reboot			88
+__SYSCALL(__NR_reboot, sys_reboot)
+__SYSCALL(89, sys_ni_syscall)		/* 89 was sys_readdir */
+__SYSCALL(90, sys_ni_syscall)		/* 90 was sys_mmap */
+#define __NR_munmap			91
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_truncate			92
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_ftruncate			93
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_fchmod			94
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_fchown			95
+__SYSCALL(__NR_fchown, sys_fchown16)
+#define __NR_getpriority		96
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_setpriority		97
+__SYSCALL(__NR_setpriority, sys_setpriority)
+__SYSCALL(98, sys_ni_syscall)		/* 98 was sys_profil */
+#define __NR_statfs			99
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_fstatfs			100
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+__SYSCALL(101, sys_ni_syscall)		/* 101 was sys_ioperm */
+__SYSCALL(102, sys_ni_syscall)		/* 102 was sys_socketcall */
+#define __NR_syslog			103
+__SYSCALL(__NR_syslog, sys_syslog)
+#define __NR_setitimer			104
+__SYSCALL(__NR_setitimer, sys_setitimer)
+#define __NR_getitimer			105
+__SYSCALL(__NR_getitimer, sys_getitimer)
+#define __NR_stat			106
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_lstat			107
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_fstat			108
+__SYSCALL(__NR_fstat, sys_newfstat)
+__SYSCALL(109, sys_ni_syscall)		/* 109 was sys_uname */
+__SYSCALL(110, sys_ni_syscall)		/* 110 was sys_iopl */
+#define __NR_vhangup			111
+__SYSCALL(__NR_vhangup, sys_vhangup)
+__SYSCALL(112, sys_ni_syscall)		/* 112 was sys_idle */
+__SYSCALL(113, sys_ni_syscall)		/* 113 was sys_syscall */
+#define __NR_wait4			114
+__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_swapoff			115
+__SYSCALL(__NR_swapoff, sys_swapoff)
+#define __NR_sysinfo			116
+__SYSCALL(__NR_sysinfo, sys_sysinfo)
+__SYSCALL(117, sys_ni_syscall)		/* 117 was sys_ipc */
+#define __NR_fsync			118
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_sigreturn			119
+__SYSCALL(__NR_sigreturn, sys_sigreturn)
+#define __NR_clone			120
+__SYSCALL(__NR_clone, sys_clone)
+#define __NR_setdomainname		121
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+#define __NR_uname			122
+__SYSCALL(__NR_uname, sys_newuname)
+__SYSCALL(123, sys_ni_syscall)		/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			124
+__SYSCALL(__NR_adjtimex, sys_adjtimex)
+#define __NR_mprotect			125
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_sigprocmask		126
+__SYSCALL(__NR_sigprocmask, sys_sigprocmask)
+__SYSCALL(127, sys_ni_syscall)		/* 127 was sys_create_module */
+#define __NR_init_module		128
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module		129
+__SYSCALL(__NR_delete_module, sys_delete_module)
+__SYSCALL(130, sys_ni_syscall)		/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			131
+__SYSCALL(__NR_quotactl, sys_quotactl)
+#define __NR_getpgid			132
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_fchdir			133
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_bdflush			134
+__SYSCALL(__NR_bdflush, sys_bdflush)
+#define __NR_sysfs			135
+__SYSCALL(__NR_sysfs, sys_sysfs)
+#define __NR_personality		136
+__SYSCALL(__NR_personality, sys_personality)
+__SYSCALL(137, sys_ni_syscall)		/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			138
+__SYSCALL(__NR_setfsuid, sys_setfsuid16)
+#define __NR_setfsgid			139
+__SYSCALL(__NR_setfsgid, sys_setfsgid16)
+#define __NR__llseek			140
+__SYSCALL(__NR__llseek, sys_llseek)
+#define __NR_getdents			141
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR__newselect			142
+__SYSCALL(__NR__newselect, sys_select)
+#define __NR_flock			143
+__SYSCALL(__NR_flock, sys_flock)
+#define __NR_msync			144
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_readv			145
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev			146
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_getsid			147
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_fdatasync			148
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#define __NR__sysctl			149
+__SYSCALL(__NR__sysctl, sys_sysctl)
+#define __NR_mlock			150
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock			151
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall			152
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall			153
+__SYSCALL(__NR_munlockall, sys_munlockall)
+#define __NR_sched_setparam		154
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_getparam		155
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setscheduler		156
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler		157
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_yield		158
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_sched_get_priority_max	159
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min	160
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval	161
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
+#define __NR_nanosleep			162
+__SYSCALL(__NR_nanosleep, sys_nanosleep)
+#define __NR_mremap			163
+__SYSCALL(__NR_mremap, sys_mremap)
+#define __NR_setresuid			164
+__SYSCALL(__NR_setresuid, sys_setresuid16)
+#define __NR_getresuid			165
+__SYSCALL(__NR_getresuid, sys_getresuid16)
+__SYSCALL(166, sys_ni_syscall)		/* 166 was sys_vm86 */
+__SYSCALL(167, sys_ni_syscall)		/* 167 was sys_query_module */
+#define __NR_poll			168
+__SYSCALL(__NR_poll, sys_poll)
+#define __NR_nfsservctl			169
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
+#define __NR_setresgid			170
+__SYSCALL(__NR_setresgid, sys_setresgid16)
+#define __NR_getresgid			171
+__SYSCALL(__NR_getresgid, sys_getresgid16)
+#define __NR_prctl			172
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_rt_sigreturn		173
+__SYSCALL(__NR_rt_sigreturn, sys_rt_sigreturn)
+#define __NR_rt_sigaction		174
+__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
+#define __NR_rt_sigprocmask		175
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigpending		176
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait		177
+__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo		178
+__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
+#define __NR_rt_sigsuspend		179
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
+#define __NR_pread64			180
+__SYSCALL(__NR_pread64, sys_pread64)
+#define __NR_pwrite64			181
+__SYSCALL(__NR_pwrite64, sys_pwrite64)
+#define __NR_chown			182
+__SYSCALL(__NR_chown, sys_chown16)
+#define __NR_getcwd			183
+__SYSCALL(__NR_getcwd, sys_getcwd)
+#define __NR_capget			184
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset			185
+__SYSCALL(__NR_capset, sys_capset)
+#define __NR_sigaltstack		186
+__SYSCALL(__NR_sigaltstack, sys_sigaltstack)
+#define __NR_sendfile			187
+__SYSCALL(__NR_sendfile, sys_sendfile)
+__SYSCALL(188, sys_ni_syscall)		/* 188 reserved */
+__SYSCALL(189, sys_ni_syscall)		/* 189 reserved */
+#define __NR_vfork			190
+__SYSCALL(__NR_vfork, sys_vfork)
+#define __NR_ugetrlimit			191	/* SuS compliant getrlimit */
+__SYSCALL(__NR_ugetrlimit, sys_getrlimit)
+#define __NR_mmap2			192
+__SYSCALL(__NR_mmap2, sys_mmap2)
+#define __NR_truncate64			193
+__SYSCALL(__NR_truncate64, sys_truncate64)
+#define __NR_ftruncate64		194
+__SYSCALL(__NR_ftruncate64, sys_ftruncate64)
+#define __NR_stat64			195
+__SYSCALL(__NR_stat64, sys_stat64)
+#define __NR_lstat64			196
+__SYSCALL(__NR_lstat64, sys_lstat64)
+#define __NR_fstat64			197
+__SYSCALL(__NR_fstat64, sys_fstat64)
+#define __NR_lchown32			198
+__SYSCALL(__NR_lchown32, sys_lchown)
+#define __NR_getuid32			199
+__SYSCALL(__NR_getuid32, sys_getuid)
+#define __NR_getgid32			200
+__SYSCALL(__NR_getgid32, sys_getgid)
+#define __NR_geteuid32			201
+__SYSCALL(__NR_geteuid32, sys_geteuid)
+#define __NR_getegid32			202
+__SYSCALL(__NR_getegid32, sys_getegid)
+#define __NR_setreuid32			203
+__SYSCALL(__NR_setreuid32, sys_setreuid)
+#define __NR_setregid32			204
+__SYSCALL(__NR_setregid32, sys_setregid)
+#define __NR_getgroups32		205
+__SYSCALL(__NR_getgroups32, sys_getgroups)
+#define __NR_setgroups32		206
+__SYSCALL(__NR_setgroups32, sys_setgroups)
+#define __NR_fchown32			207
+__SYSCALL(__NR_fchown32, sys_fchown)
+#define __NR_setresuid32		208
+__SYSCALL(__NR_setresuid32, sys_setresuid)
+#define __NR_getresuid32		209
+__SYSCALL(__NR_getresuid32, sys_getresuid)
+#define __NR_setresgid32		210
+__SYSCALL(__NR_setresgid32, sys_setresgid)
+#define __NR_getresgid32		211
+__SYSCALL(__NR_getresgid32, sys_getresgid)
+#define __NR_chown32			212
+__SYSCALL(__NR_chown32, sys_chown)
+#define __NR_setuid32			213
+__SYSCALL(__NR_setuid32, sys_setuid)
+#define __NR_setgid32			214
+__SYSCALL(__NR_setgid32, sys_setgid)
+#define __NR_setfsuid32			215
+__SYSCALL(__NR_setfsuid32, sys_setfsuid)
+#define __NR_setfsgid32			216
+__SYSCALL(__NR_setfsgid32, sys_setfsgid)
+#define __NR_getdents64			217
+__SYSCALL(__NR_getdents64, sys_getdents64)
+#define __NR_pivot_root			218
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+#define __NR_mincore			219
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise			220
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_fcntl64			221
+__SYSCALL(__NR_fcntl64, sys_fcntl64)
+__SYSCALL(222, sys_ni_syscall)		/* 222 for tux */
+__SYSCALL(223, sys_ni_syscall)		/* 223 is unused */
+#define __NR_gettid			224
+__SYSCALL(__NR_gettid, sys_gettid)
+#define __NR_readahead			225
+__SYSCALL(__NR_readahead, sys_readahead)
+#define __NR_setxattr			226
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr			227
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr			228
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr			229
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr			230
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr			231
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr			232
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr			233
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr			234
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr		235
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr		236
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr		237
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+#define __NR_tkill			238
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_sendfile64			239
+__SYSCALL(__NR_sendfile64, sys_sendfile64)
+#define __NR_futex			240
+__SYSCALL(__NR_futex, sys_futex)
+#define __NR_sched_setaffinity		241
+__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
+#define __NR_sched_getaffinity		242
+__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
+#define __NR_io_setup			243
+__SYSCALL(__NR_io_setup, sys_io_setup)
+#define __NR_io_destroy			244
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_getevents		245
+__SYSCALL(__NR_io_getevents, sys_io_getevents)
+#define __NR_io_submit			246
+__SYSCALL(__NR_io_submit, sys_io_submit)
+#define __NR_io_cancel			247
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_exit_group			248
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_lookup_dcookie		249
+__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
+#define __NR_epoll_create		250
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_epoll_ctl			251
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_epoll_wait			252
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_remap_file_pages		253
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+__SYSCALL(254, sys_ni_syscall)		/* 254 for set_thread_area */
+__SYSCALL(255, sys_ni_syscall)		/* 255 for get_thread_area */
+#define __NR_set_tid_address		256
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_timer_create		257
+__SYSCALL(__NR_timer_create, sys_timer_create)
+#define __NR_timer_settime		258
+__SYSCALL(__NR_timer_settime, sys_timer_settime)
+#define __NR_timer_gettime		259
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
+#define __NR_timer_getoverrun		260
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_delete		261
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime		262
+__SYSCALL(__NR_clock_settime, sys_clock_settime)
+#define __NR_clock_gettime		263
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
+#define __NR_clock_getres		264
+__SYSCALL(__NR_clock_getres, sys_clock_getres)
+#define __NR_clock_nanosleep		265
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
+#define __NR_statfs64			266
+__SYSCALL(__NR_statfs64, sys_statfs64)
+#define __NR_fstatfs64			267
+__SYSCALL(__NR_fstatfs64, sys_fstatfs64)
+#define __NR_tgkill			268
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_utimes			269
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR_fadvise64			270
+__SYSCALL(__NR_fadvise64, sys_fadvise64_64)
+#define __NR_pciconfig_iobase		271
+__SYSCALL(__NR_pciconfig_iobase, sys_pciconfig_iobase)
+#define __NR_pciconfig_read		272
+__SYSCALL(__NR_pciconfig_read, sys_pciconfig_read)
+#define __NR_pciconfig_write		273
+__SYSCALL(__NR_pciconfig_write, sys_pciconfig_write)
+#define __NR_mq_open			274
+__SYSCALL(__NR_mq_open, sys_mq_open)
+#define __NR_mq_unlink			275
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend		276
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
+#define __NR_mq_timedreceive		277
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
+#define __NR_mq_notify			278
+__SYSCALL(__NR_mq_notify, sys_mq_notify)
+#define __NR_mq_getsetattr		279
+__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
+#define __NR_waitid			280
+__SYSCALL(__NR_waitid, sys_waitid)
+#define __NR_socket			281
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_bind			282
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_connect			283
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_listen			284
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_accept			285
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_getsockname		286
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername		287
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_socketpair			288
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_send			289
+__SYSCALL(__NR_send, sys_send)
+#define __NR_sendto			290
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recv			291
+__SYSCALL(__NR_recv, sys_recv)
+#define __NR_recvfrom			292
+__SYSCALL(__NR_recvfrom, sys_recvfrom)
+#define __NR_shutdown			293
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_setsockopt			294
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt			295
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+#define __NR_sendmsg			296
+__SYSCALL(__NR_sendmsg, sys_sendmsg)
+#define __NR_recvmsg			297
+__SYSCALL(__NR_recvmsg, sys_recvmsg)
+#define __NR_semop			298
+__SYSCALL(__NR_semop, sys_semop)
+#define __NR_semget			299
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semctl			300
+__SYSCALL(__NR_semctl, sys_semctl)
+#define __NR_msgsnd			301
+__SYSCALL(__NR_msgsnd, sys_msgsnd)
+#define __NR_msgrcv			302
+__SYSCALL(__NR_msgrcv, sys_msgrcv)
+#define __NR_msgget			303
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgctl			304
+__SYSCALL(__NR_msgctl, sys_msgctl)
+#define __NR_shmat			305
+__SYSCALL(__NR_shmat, sys_shmat)
+#define __NR_shmdt			306
+__SYSCALL(__NR_shmdt, sys_shmdt)
+#define __NR_shmget			307
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmctl			308
+__SYSCALL(__NR_shmctl, sys_shmctl)
+#define __NR_add_key			309
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key		310
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl			311
+__SYSCALL(__NR_keyctl, sys_keyctl)
+#define __NR_semtimedop			312
+__SYSCALL(__NR_semtimedop, sys_semtimedop)
+#define __NR_vserver			313
+__SYSCALL(__NR_vserver, sys_ni_syscall)
+#define __NR_ioprio_set			314
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get			315
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+#define __NR_inotify_init		316
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_inotify_add_watch		317
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch		318
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+#define __NR_mbind			319
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_get_mempolicy		320
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_set_mempolicy		321
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_openat			322
+__SYSCALL(__NR_openat, sys_openat)
+#define __NR_mkdirat			323
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_mknodat			324
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_fchownat			325
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_futimesat			326
+__SYSCALL(__NR_futimesat, sys_futimesat)
+#define __NR_fstatat64			327
+__SYSCALL(__NR_fstatat64, sys_fstatat64)
+#define __NR_unlinkat			328
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_renameat			329
+__SYSCALL(__NR_renameat, sys_renameat)
+#define __NR_linkat			330
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_symlinkat			331
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_readlinkat			332
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR_fchmodat			333
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_faccessat			334
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_pselect6			335
+__SYSCALL(__NR_pselect6, sys_pselect6)
+#define __NR_ppoll			336
+__SYSCALL(__NR_ppoll, sys_ppoll)
+#define __NR_unshare			337
+__SYSCALL(__NR_unshare, sys_unshare)
+#define __NR_set_robust_list		338
+__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
+#define __NR_get_robust_list		339
+__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
+#define __NR_splice			340
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_sync_file_range2		341
+__SYSCALL(__NR_sync_file_range2, sys_sync_file_range2)
+#define __NR_tee			342
+__SYSCALL(__NR_tee, sys_tee)
+#define __NR_vmsplice			343
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+#define __NR_move_pages			344
+__SYSCALL(__NR_move_pages, sys_move_pages)
+#define __NR_getcpu			345
+__SYSCALL(__NR_getcpu, sys_getcpu)
+#define __NR_epoll_pwait		346
+__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
+#define __NR_kexec_load			347
+__SYSCALL(__NR_kexec_load, sys_kexec_load)
+#define __NR_utimensat			348
+__SYSCALL(__NR_utimensat, sys_utimensat)
+#define __NR_signalfd			349
+__SYSCALL(__NR_signalfd, sys_signalfd)
+#define __NR_timerfd_create		350
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_eventfd			351
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_fallocate			352
+__SYSCALL(__NR_fallocate, sys_fallocate)
+#define __NR_timerfd_settime		353
+__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
+#define __NR_timerfd_gettime		354
+__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+#define __NR_signalfd4			355
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
+#define __NR_eventfd2			356
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+#define __NR_epoll_create1		357
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_dup3			358
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR_pipe2			359
+__SYSCALL(__NR_pipe2, sys_pipe2)
+#define __NR_inotify_init1		360
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+#define __NR_preadv			361
+__SYSCALL(__NR_preadv, sys_preadv)
+#define __NR_pwritev			362
+__SYSCALL(__NR_pwritev, sys_pwritev)
+#define __NR_rt_tgsigqueueinfo		363
+__SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
+#define __NR_perf_event_open		364
+__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_recvmmsg			365
+__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
+#define __NR_accept4			366
+__SYSCALL(__NR_accept4, sys_accept4)
+#define __NR_fanotify_init		367
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark		368
+__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
+#define __NR_prlimit64			369
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
+#define __NR_name_to_handle_at		370
+__SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
+#define __NR_open_by_handle_at		371
+__SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
+#define __NR_clock_adjtime		372
+__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
+#define __NR_syncfs			373
+__SYSCALL(__NR_syncfs, sys_syncfs)
+
+/*
+ * The following SVCs are ARM private.
+ */
+#define __ARM_NR_COMPAT_BASE		0x0f0000
+#define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
+#define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
+
+#endif	/* __SYSCALL_COMPAT */
+
+#define __NR_compat_syscalls		374
+
+#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
+#define __ARCH_WANT_COMPAT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h
new file mode 100644
index 000000000000..839ce0031bd5
--- /dev/null
+++ b/arch/arm64/include/asm/vdso.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_VDSO_H
+#define __ASM_VDSO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Default link address for the vDSO.
+ * Since we randomise the VDSO mapping, there's little point in trying
+ * to prelink this.
+ */
+#define VDSO_LBASE	0x0
+
+#ifndef __ASSEMBLY__
+
+#include <generated/vdso-offsets.h>
+
+#define VDSO_SYMBOL(base, name)						   \
+({									   \
+	(void *)(vdso_offset_##name - VDSO_LBASE + (unsigned long)(base)); \
+})
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_VDSO_H */
diff --git a/arch/arm64/include/asm/vdso_datapage.h b/arch/arm64/include/asm/vdso_datapage.h
new file mode 100644
index 000000000000..de66199673d7
--- /dev/null
+++ b/arch/arm64/include/asm/vdso_datapage.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_VDSO_DATAPAGE_H
+#define __ASM_VDSO_DATAPAGE_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+struct vdso_data {
+	__u64 cs_cycle_last;	/* Timebase at clocksource init */
+	__u64 xtime_clock_sec;	/* Kernel time */
+	__u64 xtime_clock_nsec;
+	__u64 xtime_coarse_sec;	/* Coarse time */
+	__u64 xtime_coarse_nsec;
+	__u64 wtm_clock_sec;	/* Wall to monotonic time */
+	__u64 wtm_clock_nsec;
+	__u32 tb_seq_count;	/* Timebase sequence counter */
+	__u32 cs_mult;		/* Clocksource multiplier */
+	__u32 cs_shift;		/* Clocksource shift */
+	__u32 tz_minuteswest;	/* Whacky timezone stuff */
+	__u32 tz_dsttime;
+	__u32 use_syscall;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_VDSO_DATAPAGE_H */
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/arm64/kernel/.gitignore b/arch/arm64/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/arm64/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
new file mode 100644
index 000000000000..e2caff1b812a
--- /dev/null
+++ b/arch/arm64/kernel/Makefile
@@ -0,0 +1,27 @@
+#
+# Makefile for the linux kernel.
+#
+
+CPPFLAGS_vmlinux.lds	:= -DTEXT_OFFSET=$(TEXT_OFFSET)
+AFLAGS_head.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
+
+# Object file lists.
+arm64-obj-y		:= cputable.o debug-monitors.o entry.o irq.o fpsimd.o	\
+			   entry-fpsimd.o process.o ptrace.o setup.o signal.o	\
+			   sys.o stacktrace.o time.o traps.o io.o vdso.o
+
+arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
+					   sys_compat.o
+arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
+arm64-obj-$(CONFIG_SMP)			+= smp.o
+arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
+arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
+
+obj-y					+= $(arm64-obj-y) vdso/
+obj-m					+= $(arm64-obj-m)
+head-y					:= head.o
+extra-y					:= $(head-y) vmlinux.lds
+
+# vDSO - this must be built first to generate the symbol offsets
+$(call objectify,$(arm64-obj-y)): $(obj)/vdso/vdso-offsets.h
+$(obj)/vdso/vdso-offsets.h: $(obj)/vdso
diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c
new file mode 100644
index 000000000000..cef3925eaf60
--- /dev/null
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -0,0 +1,46 @@
+/*
+ * Based on arch/arm/kernel/armksyms.c
+ *
+ * Copyright (C) 2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+
+	/* user mem (segment) */
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+
+EXPORT_SYMBOL(copy_page);
+
+EXPORT_SYMBOL(__copy_from_user);
+EXPORT_SYMBOL(__copy_to_user);
+EXPORT_SYMBOL(__clear_user);
+
+	/* bitops */
+EXPORT_SYMBOL(__atomic_hash);
+
+	/* physical memory */
+EXPORT_SYMBOL(memstart_addr);
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
new file mode 100644
index 000000000000..a2a4d810bea3
--- /dev/null
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -0,0 +1,108 @@
+/*
+ * Based on arch/arm/kernel/asm-offsets.c
+ *
+ * Copyright (C) 1995-2003 Russell King
+ *               2001-2002 Keith Owens
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/cputable.h>
+#include <asm/vdso_datapage.h>
+#include <linux/kbuild.h>
+
+int main(void)
+{
+  DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
+  BLANK();
+  DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
+  DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
+  DEFINE(TI_ADDR_LIMIT,		offsetof(struct thread_info, addr_limit));
+  DEFINE(TI_TASK,		offsetof(struct thread_info, task));
+  DEFINE(TI_EXEC_DOMAIN,	offsetof(struct thread_info, exec_domain));
+  DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
+  BLANK();
+  DEFINE(THREAD_CPU_CONTEXT,	offsetof(struct task_struct, thread.cpu_context));
+  BLANK();
+  DEFINE(S_X0,			offsetof(struct pt_regs, regs[0]));
+  DEFINE(S_X1,			offsetof(struct pt_regs, regs[1]));
+  DEFINE(S_X2,			offsetof(struct pt_regs, regs[2]));
+  DEFINE(S_X3,			offsetof(struct pt_regs, regs[3]));
+  DEFINE(S_X4,			offsetof(struct pt_regs, regs[4]));
+  DEFINE(S_X5,			offsetof(struct pt_regs, regs[5]));
+  DEFINE(S_X6,			offsetof(struct pt_regs, regs[6]));
+  DEFINE(S_X7,			offsetof(struct pt_regs, regs[7]));
+  DEFINE(S_LR,			offsetof(struct pt_regs, regs[30]));
+  DEFINE(S_SP,			offsetof(struct pt_regs, sp));
+#ifdef CONFIG_COMPAT
+  DEFINE(S_COMPAT_SP,		offsetof(struct pt_regs, compat_sp));
+#endif
+  DEFINE(S_PSTATE,		offsetof(struct pt_regs, pstate));
+  DEFINE(S_PC,			offsetof(struct pt_regs, pc));
+  DEFINE(S_ORIG_X0,		offsetof(struct pt_regs, orig_x0));
+  DEFINE(S_SYSCALLNO,		offsetof(struct pt_regs, syscallno));
+  DEFINE(S_FRAME_SIZE,		sizeof(struct pt_regs));
+  BLANK();
+  DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id));
+  BLANK();
+  DEFINE(VMA_VM_MM,		offsetof(struct vm_area_struct, vm_mm));
+  DEFINE(VMA_VM_FLAGS,		offsetof(struct vm_area_struct, vm_flags));
+  BLANK();
+  DEFINE(VM_EXEC,	       	VM_EXEC);
+  BLANK();
+  DEFINE(PAGE_SZ,	       	PAGE_SIZE);
+  BLANK();
+  DEFINE(CPU_INFO_SZ,		sizeof(struct cpu_info));
+  DEFINE(CPU_INFO_SETUP,	offsetof(struct cpu_info, cpu_setup));
+  BLANK();
+  DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
+  DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
+  DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
+  BLANK();
+  DEFINE(CLOCK_REALTIME,	CLOCK_REALTIME);
+  DEFINE(CLOCK_MONOTONIC,	CLOCK_MONOTONIC);
+  DEFINE(CLOCK_REALTIME_RES,	MONOTONIC_RES_NSEC);
+  DEFINE(CLOCK_REALTIME_COARSE,	CLOCK_REALTIME_COARSE);
+  DEFINE(CLOCK_MONOTONIC_COARSE,CLOCK_MONOTONIC_COARSE);
+  DEFINE(CLOCK_COARSE_RES,	LOW_RES_NSEC);
+  DEFINE(NSEC_PER_SEC,		NSEC_PER_SEC);
+  BLANK();
+  DEFINE(VDSO_CS_CYCLE_LAST,	offsetof(struct vdso_data, cs_cycle_last));
+  DEFINE(VDSO_XTIME_CLK_SEC,	offsetof(struct vdso_data, xtime_clock_sec));
+  DEFINE(VDSO_XTIME_CLK_NSEC,	offsetof(struct vdso_data, xtime_clock_nsec));
+  DEFINE(VDSO_XTIME_CRS_SEC,	offsetof(struct vdso_data, xtime_coarse_sec));
+  DEFINE(VDSO_XTIME_CRS_NSEC,	offsetof(struct vdso_data, xtime_coarse_nsec));
+  DEFINE(VDSO_WTM_CLK_SEC,	offsetof(struct vdso_data, wtm_clock_sec));
+  DEFINE(VDSO_WTM_CLK_NSEC,	offsetof(struct vdso_data, wtm_clock_nsec));
+  DEFINE(VDSO_TB_SEQ_COUNT,	offsetof(struct vdso_data, tb_seq_count));
+  DEFINE(VDSO_CS_MULT,		offsetof(struct vdso_data, cs_mult));
+  DEFINE(VDSO_CS_SHIFT,		offsetof(struct vdso_data, cs_shift));
+  DEFINE(VDSO_TZ_MINWEST,	offsetof(struct vdso_data, tz_minuteswest));
+  DEFINE(VDSO_TZ_DSTTIME,	offsetof(struct vdso_data, tz_dsttime));
+  DEFINE(VDSO_USE_SYSCALL,	offsetof(struct vdso_data, use_syscall));
+  BLANK();
+  DEFINE(TVAL_TV_SEC,		offsetof(struct timeval, tv_sec));
+  DEFINE(TVAL_TV_USEC,		offsetof(struct timeval, tv_usec));
+  DEFINE(TSPEC_TV_SEC,		offsetof(struct timespec, tv_sec));
+  DEFINE(TSPEC_TV_NSEC,		offsetof(struct timespec, tv_nsec));
+  BLANK();
+  DEFINE(TZ_MINWEST,		offsetof(struct timezone, tz_minuteswest));
+  DEFINE(TZ_DSTTIME,		offsetof(struct timezone, tz_dsttime));
+  return 0;
+}
diff --git a/arch/arm64/kernel/cputable.c b/arch/arm64/kernel/cputable.c
new file mode 100644
index 000000000000..63cfc4a43f4e
--- /dev/null
+++ b/arch/arm64/kernel/cputable.c
@@ -0,0 +1,33 @@
+/*
+ * arch/arm64/kernel/cputable.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+
+#include <asm/cputable.h>
+
+extern unsigned long __cpu_setup(void);
+
+struct cpu_info __initdata cpu_table[] = {
+	{
+		.cpu_id_val	= 0x000f0000,
+		.cpu_id_mask	= 0x000f0000,
+		.cpu_name	= "AArch64 Processor",
+		.cpu_setup	= __cpu_setup,
+	},
+	{ /* Empty */ },
+};
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
new file mode 100644
index 000000000000..0c3ba9f51376
--- /dev/null
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -0,0 +1,288 @@
+/*
+ * ARMv8 single-step debug support and mdscr context switching.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/cpu.h>
+#include <linux/debugfs.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/stat.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/local.h>
+#include <asm/cputype.h>
+#include <asm/system_misc.h>
+
+/* Low-level stepping controls. */
+#define DBG_MDSCR_SS		(1 << 0)
+#define DBG_SPSR_SS		(1 << 21)
+
+/* MDSCR_EL1 enabling bits */
+#define DBG_MDSCR_KDE		(1 << 13)
+#define DBG_MDSCR_MDE		(1 << 15)
+#define DBG_MDSCR_MASK		~(DBG_MDSCR_KDE | DBG_MDSCR_MDE)
+
+/* Determine debug architecture. */
+u8 debug_monitors_arch(void)
+{
+	return read_cpuid(ID_AA64DFR0_EL1) & 0xf;
+}
+
+/*
+ * MDSCR access routines.
+ */
+static void mdscr_write(u32 mdscr)
+{
+	unsigned long flags;
+	local_dbg_save(flags);
+	asm volatile("msr mdscr_el1, %0" :: "r" (mdscr));
+	local_dbg_restore(flags);
+}
+
+static u32 mdscr_read(void)
+{
+	u32 mdscr;
+	asm volatile("mrs %0, mdscr_el1" : "=r" (mdscr));
+	return mdscr;
+}
+
+/*
+ * Allow root to disable self-hosted debug from userspace.
+ * This is useful if you want to connect an external JTAG debugger.
+ */
+static u32 debug_enabled = 1;
+
+static int create_debug_debugfs_entry(void)
+{
+	debugfs_create_bool("debug_enabled", 0644, NULL, &debug_enabled);
+	return 0;
+}
+fs_initcall(create_debug_debugfs_entry);
+
+static int __init early_debug_disable(char *buf)
+{
+	debug_enabled = 0;
+	return 0;
+}
+
+early_param("nodebugmon", early_debug_disable);
+
+/*
+ * Keep track of debug users on each core.
+ * The ref counts are per-cpu so we use a local_t type.
+ */
+static DEFINE_PER_CPU(local_t, mde_ref_count);
+static DEFINE_PER_CPU(local_t, kde_ref_count);
+
+void enable_debug_monitors(enum debug_el el)
+{
+	u32 mdscr, enable = 0;
+
+	WARN_ON(preemptible());
+
+	if (local_inc_return(&__get_cpu_var(mde_ref_count)) == 1)
+		enable = DBG_MDSCR_MDE;
+
+	if (el == DBG_ACTIVE_EL1 &&
+	    local_inc_return(&__get_cpu_var(kde_ref_count)) == 1)
+		enable |= DBG_MDSCR_KDE;
+
+	if (enable && debug_enabled) {
+		mdscr = mdscr_read();
+		mdscr |= enable;
+		mdscr_write(mdscr);
+	}
+}
+
+void disable_debug_monitors(enum debug_el el)
+{
+	u32 mdscr, disable = 0;
+
+	WARN_ON(preemptible());
+
+	if (local_dec_and_test(&__get_cpu_var(mde_ref_count)))
+		disable = ~DBG_MDSCR_MDE;
+
+	if (el == DBG_ACTIVE_EL1 &&
+	    local_dec_and_test(&__get_cpu_var(kde_ref_count)))
+		disable &= ~DBG_MDSCR_KDE;
+
+	if (disable) {
+		mdscr = mdscr_read();
+		mdscr &= disable;
+		mdscr_write(mdscr);
+	}
+}
+
+/*
+ * OS lock clearing.
+ */
+static void clear_os_lock(void *unused)
+{
+	asm volatile("msr mdscr_el1, %0" : : "r" (0));
+	isb();
+	asm volatile("msr oslar_el1, %0" : : "r" (0));
+	isb();
+}
+
+static int __cpuinit os_lock_notify(struct notifier_block *self,
+				    unsigned long action, void *data)
+{
+	int cpu = (unsigned long)data;
+	if (action == CPU_ONLINE)
+		smp_call_function_single(cpu, clear_os_lock, NULL, 1);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata os_lock_nb = {
+	.notifier_call = os_lock_notify,
+};
+
+static int __cpuinit debug_monitors_init(void)
+{
+	/* Clear the OS lock. */
+	smp_call_function(clear_os_lock, NULL, 1);
+	clear_os_lock(NULL);
+
+	/* Register hotplug handler. */
+	register_cpu_notifier(&os_lock_nb);
+	return 0;
+}
+postcore_initcall(debug_monitors_init);
+
+/*
+ * Single step API and exception handling.
+ */
+static void set_regs_spsr_ss(struct pt_regs *regs)
+{
+	unsigned long spsr;
+
+	spsr = regs->pstate;
+	spsr &= ~DBG_SPSR_SS;
+	spsr |= DBG_SPSR_SS;
+	regs->pstate = spsr;
+}
+
+static void clear_regs_spsr_ss(struct pt_regs *regs)
+{
+	unsigned long spsr;
+
+	spsr = regs->pstate;
+	spsr &= ~DBG_SPSR_SS;
+	regs->pstate = spsr;
+}
+
+static int single_step_handler(unsigned long addr, unsigned int esr,
+			       struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	/*
+	 * If we are stepping a pending breakpoint, call the hw_breakpoint
+	 * handler first.
+	 */
+	if (!reinstall_suspended_bps(regs))
+		return 0;
+
+	if (user_mode(regs)) {
+		info.si_signo = SIGTRAP;
+		info.si_errno = 0;
+		info.si_code  = TRAP_HWBKPT;
+		info.si_addr  = (void __user *)instruction_pointer(regs);
+		force_sig_info(SIGTRAP, &info, current);
+
+		/*
+		 * ptrace will disable single step unless explicitly
+		 * asked to re-enable it. For other clients, it makes
+		 * sense to leave it enabled (i.e. rewind the controls
+		 * to the active-not-pending state).
+		 */
+		user_rewind_single_step(current);
+	} else {
+		/* TODO: route to KGDB */
+		pr_warning("Unexpected kernel single-step exception at EL1\n");
+		/*
+		 * Re-enable stepping since we know that we will be
+		 * returning to regs.
+		 */
+		set_regs_spsr_ss(regs);
+	}
+
+	return 0;
+}
+
+static int __init single_step_init(void)
+{
+	hook_debug_fault_code(DBG_ESR_EVT_HWSS, single_step_handler, SIGTRAP,
+			      TRAP_HWBKPT, "single-step handler");
+	return 0;
+}
+arch_initcall(single_step_init);
+
+/* Re-enable single step for syscall restarting. */
+void user_rewind_single_step(struct task_struct *task)
+{
+	/*
+	 * If single step is active for this thread, then set SPSR.SS
+	 * to 1 to avoid returning to the active-pending state.
+	 */
+	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+		set_regs_spsr_ss(task_pt_regs(task));
+}
+
+void user_fastforward_single_step(struct task_struct *task)
+{
+	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+		clear_regs_spsr_ss(task_pt_regs(task));
+}
+
+/* Kernel API */
+void kernel_enable_single_step(struct pt_regs *regs)
+{
+	WARN_ON(!irqs_disabled());
+	set_regs_spsr_ss(regs);
+	mdscr_write(mdscr_read() | DBG_MDSCR_SS);
+	enable_debug_monitors(DBG_ACTIVE_EL1);
+}
+
+void kernel_disable_single_step(void)
+{
+	WARN_ON(!irqs_disabled());
+	mdscr_write(mdscr_read() & ~DBG_MDSCR_SS);
+	disable_debug_monitors(DBG_ACTIVE_EL1);
+}
+
+int kernel_active_single_step(void)
+{
+	WARN_ON(!irqs_disabled());
+	return mdscr_read() & DBG_MDSCR_SS;
+}
+
+/* ptrace API */
+void user_enable_single_step(struct task_struct *task)
+{
+	set_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP);
+	set_regs_spsr_ss(task_pt_regs(task));
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+	clear_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP);
+}
diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S
new file mode 100644
index 000000000000..17988a6e7ea2
--- /dev/null
+++ b/arch/arm64/kernel/entry-fpsimd.S
@@ -0,0 +1,80 @@
+/*
+ * FP/SIMD state saving and restoring
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+/*
+ * Save the FP registers.
+ *
+ * x0 - pointer to struct fpsimd_state
+ */
+ENTRY(fpsimd_save_state)
+	stp	q0, q1, [x0, #16 * 0]
+	stp	q2, q3, [x0, #16 * 2]
+	stp	q4, q5, [x0, #16 * 4]
+	stp	q6, q7, [x0, #16 * 6]
+	stp	q8, q9, [x0, #16 * 8]
+	stp	q10, q11, [x0, #16 * 10]
+	stp	q12, q13, [x0, #16 * 12]
+	stp	q14, q15, [x0, #16 * 14]
+	stp	q16, q17, [x0, #16 * 16]
+	stp	q18, q19, [x0, #16 * 18]
+	stp	q20, q21, [x0, #16 * 20]
+	stp	q22, q23, [x0, #16 * 22]
+	stp	q24, q25, [x0, #16 * 24]
+	stp	q26, q27, [x0, #16 * 26]
+	stp	q28, q29, [x0, #16 * 28]
+	stp	q30, q31, [x0, #16 * 30]!
+	mrs	x8, fpsr
+	str	w8, [x0, #16 * 2]
+	mrs	x8, fpcr
+	str	w8, [x0, #16 * 2 + 4]
+	ret
+ENDPROC(fpsimd_save_state)
+
+/*
+ * Load the FP registers.
+ *
+ * x0 - pointer to struct fpsimd_state
+ */
+ENTRY(fpsimd_load_state)
+	ldp	q0, q1, [x0, #16 * 0]
+	ldp	q2, q3, [x0, #16 * 2]
+	ldp	q4, q5, [x0, #16 * 4]
+	ldp	q6, q7, [x0, #16 * 6]
+	ldp	q8, q9, [x0, #16 * 8]
+	ldp	q10, q11, [x0, #16 * 10]
+	ldp	q12, q13, [x0, #16 * 12]
+	ldp	q14, q15, [x0, #16 * 14]
+	ldp	q16, q17, [x0, #16 * 16]
+	ldp	q18, q19, [x0, #16 * 18]
+	ldp	q20, q21, [x0, #16 * 20]
+	ldp	q22, q23, [x0, #16 * 22]
+	ldp	q24, q25, [x0, #16 * 24]
+	ldp	q26, q27, [x0, #16 * 26]
+	ldp	q28, q29, [x0, #16 * 28]
+	ldp	q30, q31, [x0, #16 * 30]!
+	ldr	w8, [x0, #16 * 2]
+	ldr	w9, [x0, #16 * 2 + 4]
+	msr	fpsr, x8
+	msr	fpcr, x9
+	ret
+ENDPROC(fpsimd_load_state)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
new file mode 100644
index 000000000000..38cf853a3667
--- /dev/null
+++ b/arch/arm64/kernel/entry.S
@@ -0,0 +1,695 @@
+/*
+ * Low-level exception handling code
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Authors:	Catalin Marinas <catalin.marinas@arm.com>
+ *		Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+/*
+ * Bad Abort numbers
+ *-----------------
+ */
+#define BAD_SYNC	0
+#define BAD_IRQ		1
+#define BAD_FIQ		2
+#define BAD_ERROR	3
+
+	.macro	kernel_entry, el, regsize = 64
+	sub	sp, sp, #S_FRAME_SIZE - S_LR	// room for LR, SP, SPSR, ELR
+	.if	\regsize == 32
+	mov	w0, w0				// zero upper 32 bits of x0
+	.endif
+	push	x28, x29
+	push	x26, x27
+	push	x24, x25
+	push	x22, x23
+	push	x20, x21
+	push	x18, x19
+	push	x16, x17
+	push	x14, x15
+	push	x12, x13
+	push	x10, x11
+	push	x8, x9
+	push	x6, x7
+	push	x4, x5
+	push	x2, x3
+	push	x0, x1
+	.if	\el == 0
+	mrs	x21, sp_el0
+	.else
+	add	x21, sp, #S_FRAME_SIZE
+	.endif
+	mrs	x22, elr_el1
+	mrs	x23, spsr_el1
+	stp	lr, x21, [sp, #S_LR]
+	stp	x22, x23, [sp, #S_PC]
+
+	/*
+	 * Set syscallno to -1 by default (overridden later if real syscall).
+	 */
+	.if	\el == 0
+	mvn	x21, xzr
+	str	x21, [sp, #S_SYSCALLNO]
+	.endif
+
+	/*
+	 * Registers that may be useful after this macro is invoked:
+	 *
+	 * x21 - aborted SP
+	 * x22 - aborted PC
+	 * x23 - aborted PSTATE
+	*/
+	.endm
+
+	.macro	kernel_exit, el, ret = 0
+	ldp	x21, x22, [sp, #S_PC]		// load ELR, SPSR
+	.if	\el == 0
+	ldr	x23, [sp, #S_SP]		// load return stack pointer
+	.endif
+	.if	\ret
+	ldr	x1, [sp, #S_X1]			// preserve x0 (syscall return)
+	add	sp, sp, S_X2
+	.else
+	pop	x0, x1
+	.endif
+	pop	x2, x3				// load the rest of the registers
+	pop	x4, x5
+	pop	x6, x7
+	pop	x8, x9
+	msr	elr_el1, x21			// set up the return data
+	msr	spsr_el1, x22
+	.if	\el == 0
+	msr	sp_el0, x23
+	.endif
+	pop	x10, x11
+	pop	x12, x13
+	pop	x14, x15
+	pop	x16, x17
+	pop	x18, x19
+	pop	x20, x21
+	pop	x22, x23
+	pop	x24, x25
+	pop	x26, x27
+	pop	x28, x29
+	ldr	lr, [sp], #S_FRAME_SIZE - S_LR	// load LR and restore SP
+	eret					// return to kernel
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp
+	and	\rd, \rd, #~((1 << 13) - 1)	// top of 8K stack
+	.endm
+
+/*
+ * These are the registers used in the syscall handler, and allow us to
+ * have in theory up to 7 arguments to a function - x0 to x6.
+ *
+ * x7 is reserved for the system call number in 32-bit mode.
+ */
+sc_nr	.req	x25		// number of system calls
+scno	.req	x26		// syscall number
+stbl	.req	x27		// syscall table pointer
+tsk	.req	x28		// current thread_info
+
+/*
+ * Interrupt handling.
+ */
+	.macro	irq_handler
+	ldr	x1, handle_arch_irq
+	mov	x0, sp
+	blr	x1
+	.endm
+
+	.text
+
+/*
+ * Exception vectors.
+ */
+	.macro	ventry	label
+	.align	7
+	b	\label
+	.endm
+
+	.align	11
+ENTRY(vectors)
+	ventry	el1_sync_invalid		// Synchronous EL1t
+	ventry	el1_irq_invalid			// IRQ EL1t
+	ventry	el1_fiq_invalid			// FIQ EL1t
+	ventry	el1_error_invalid		// Error EL1t
+
+	ventry	el1_sync			// Synchronous EL1h
+	ventry	el1_irq				// IRQ EL1h
+	ventry	el1_fiq_invalid			// FIQ EL1h
+	ventry	el1_error_invalid		// Error EL1h
+
+	ventry	el0_sync			// Synchronous 64-bit EL0
+	ventry	el0_irq				// IRQ 64-bit EL0
+	ventry	el0_fiq_invalid			// FIQ 64-bit EL0
+	ventry	el0_error_invalid		// Error 64-bit EL0
+
+#ifdef CONFIG_COMPAT
+	ventry	el0_sync_compat			// Synchronous 32-bit EL0
+	ventry	el0_irq_compat			// IRQ 32-bit EL0
+	ventry	el0_fiq_invalid_compat		// FIQ 32-bit EL0
+	ventry	el0_error_invalid_compat	// Error 32-bit EL0
+#else
+	ventry	el0_sync_invalid		// Synchronous 32-bit EL0
+	ventry	el0_irq_invalid			// IRQ 32-bit EL0
+	ventry	el0_fiq_invalid			// FIQ 32-bit EL0
+	ventry	el0_error_invalid		// Error 32-bit EL0
+#endif
+END(vectors)
+
+/*
+ * Invalid mode handlers
+ */
+	.macro	inv_entry, el, reason, regsize = 64
+	kernel_entry el, \regsize
+	mov	x0, sp
+	mov	x1, #\reason
+	mrs	x2, esr_el1
+	b	bad_mode
+	.endm
+
+el0_sync_invalid:
+	inv_entry 0, BAD_SYNC
+ENDPROC(el0_sync_invalid)
+
+el0_irq_invalid:
+	inv_entry 0, BAD_IRQ
+ENDPROC(el0_irq_invalid)
+
+el0_fiq_invalid:
+	inv_entry 0, BAD_FIQ
+ENDPROC(el0_fiq_invalid)
+
+el0_error_invalid:
+	inv_entry 0, BAD_ERROR
+ENDPROC(el0_error_invalid)
+
+#ifdef CONFIG_COMPAT
+el0_fiq_invalid_compat:
+	inv_entry 0, BAD_FIQ, 32
+ENDPROC(el0_fiq_invalid_compat)
+
+el0_error_invalid_compat:
+	inv_entry 0, BAD_ERROR, 32
+ENDPROC(el0_error_invalid_compat)
+#endif
+
+el1_sync_invalid:
+	inv_entry 1, BAD_SYNC
+ENDPROC(el1_sync_invalid)
+
+el1_irq_invalid:
+	inv_entry 1, BAD_IRQ
+ENDPROC(el1_irq_invalid)
+
+el1_fiq_invalid:
+	inv_entry 1, BAD_FIQ
+ENDPROC(el1_fiq_invalid)
+
+el1_error_invalid:
+	inv_entry 1, BAD_ERROR
+ENDPROC(el1_error_invalid)
+
+/*
+ * EL1 mode handlers.
+ */
+	.align	6
+el1_sync:
+	kernel_entry 1
+	mrs	x1, esr_el1			// read the syndrome register
+	lsr	x24, x1, #26			// exception class
+	cmp	x24, #0x25			// data abort in EL1
+	b.eq	el1_da
+	cmp	x24, #0x18			// configurable trap
+	b.eq	el1_undef
+	cmp	x24, #0x26			// stack alignment exception
+	b.eq	el1_sp_pc
+	cmp	x24, #0x22			// pc alignment exception
+	b.eq	el1_sp_pc
+	cmp	x24, #0x00			// unknown exception in EL1
+	b.eq	el1_undef
+	cmp	x24, #0x30			// debug exception in EL1
+	b.ge	el1_dbg
+	b	el1_inv
+el1_da:
+	/*
+	 * Data abort handling
+	 */
+	mrs	x0, far_el1
+	enable_dbg_if_not_stepping x2
+	// re-enable interrupts if they were enabled in the aborted context
+	tbnz	x23, #7, 1f			// PSR_I_BIT
+	enable_irq
+1:
+	mov	x2, sp				// struct pt_regs
+	bl	do_mem_abort
+
+	// disable interrupts before pulling preserved data off the stack
+	disable_irq
+	kernel_exit 1
+el1_sp_pc:
+	/*
+	 * Stack or PC alignment exception handling
+	 */
+	mrs	x0, far_el1
+	mov	x1, x25
+	mov	x2, sp
+	b	do_sp_pc_abort
+el1_undef:
+	/*
+	 * Undefined instruction
+	 */
+	mov	x0, sp
+	b	do_undefinstr
+el1_dbg:
+	/*
+	 * Debug exception handling
+	 */
+	tbz	x24, #0, el1_inv		// EL1 only
+	mrs	x0, far_el1
+	mov	x2, sp				// struct pt_regs
+	bl	do_debug_exception
+
+	kernel_exit 1
+el1_inv:
+	// TODO: add support for undefined instructions in kernel mode
+	mov	x0, sp
+	mov	x1, #BAD_SYNC
+	mrs	x2, esr_el1
+	b	bad_mode
+ENDPROC(el1_sync)
+
+	.align	6
+el1_irq:
+	kernel_entry 1
+	enable_dbg_if_not_stepping x0
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
+#ifdef CONFIG_PREEMPT
+	get_thread_info tsk
+	ldr	x24, [tsk, #TI_PREEMPT]		// get preempt count
+	add	x0, x24, #1			// increment it
+	str	x0, [tsk, #TI_PREEMPT]
+#endif
+	irq_handler
+#ifdef CONFIG_PREEMPT
+	str	x24, [tsk, #TI_PREEMPT]		// restore preempt count
+	cbnz	x24, 1f				// preempt count != 0
+	ldr	x0, [tsk, #TI_FLAGS]		// get flags
+	tbz	x0, #TIF_NEED_RESCHED, 1f	// needs rescheduling?
+	bl	el1_preempt
+1:
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_on
+#endif
+	kernel_exit 1
+ENDPROC(el1_irq)
+
+#ifdef CONFIG_PREEMPT
+el1_preempt:
+	mov	x24, lr
+1:	enable_dbg
+	bl	preempt_schedule_irq		// irq en/disable is done inside
+	ldr	x0, [tsk, #TI_FLAGS]		// get new tasks TI_FLAGS
+	tbnz	x0, #TIF_NEED_RESCHED, 1b	// needs rescheduling?
+	ret	x24
+#endif
+
+/*
+ * EL0 mode handlers.
+ */
+	.align	6
+el0_sync:
+	kernel_entry 0
+	mrs	x25, esr_el1			// read the syndrome register
+	lsr	x24, x25, #26			// exception class
+	cmp	x24, #0x15			// SVC in 64-bit state
+	b.eq	el0_svc
+	adr	lr, ret_from_exception
+	cmp	x24, #0x24			// data abort in EL0
+	b.eq	el0_da
+	cmp	x24, #0x20			// instruction abort in EL0
+	b.eq	el0_ia
+	cmp	x24, #0x07			// FP/ASIMD access
+	b.eq	el0_fpsimd_acc
+	cmp	x24, #0x2c			// FP/ASIMD exception
+	b.eq	el0_fpsimd_exc
+	cmp	x24, #0x18			// configurable trap
+	b.eq	el0_undef
+	cmp	x24, #0x26			// stack alignment exception
+	b.eq	el0_sp_pc
+	cmp	x24, #0x22			// pc alignment exception
+	b.eq	el0_sp_pc
+	cmp	x24, #0x00			// unknown exception in EL0
+	b.eq	el0_undef
+	cmp	x24, #0x30			// debug exception in EL0
+	b.ge	el0_dbg
+	b	el0_inv
+
+#ifdef CONFIG_COMPAT
+	.align	6
+el0_sync_compat:
+	kernel_entry 0, 32
+	mrs	x25, esr_el1			// read the syndrome register
+	lsr	x24, x25, #26			// exception class
+	cmp	x24, #0x11			// SVC in 32-bit state
+	b.eq	el0_svc_compat
+	adr	lr, ret_from_exception
+	cmp	x24, #0x24			// data abort in EL0
+	b.eq	el0_da
+	cmp	x24, #0x20			// instruction abort in EL0
+	b.eq	el0_ia
+	cmp	x24, #0x07			// FP/ASIMD access
+	b.eq	el0_fpsimd_acc
+	cmp	x24, #0x28			// FP/ASIMD exception
+	b.eq	el0_fpsimd_exc
+	cmp	x24, #0x00			// unknown exception in EL0
+	b.eq	el0_undef
+	cmp	x24, #0x30			// debug exception in EL0
+	b.ge	el0_dbg
+	b	el0_inv
+el0_svc_compat:
+	/*
+	 * AArch32 syscall handling
+	 */
+	adr	stbl, compat_sys_call_table	// load compat syscall table pointer
+	uxtw	scno, w7			// syscall number in w7 (r7)
+	mov     sc_nr, #__NR_compat_syscalls
+	b	el0_svc_naked
+
+	.align	6
+el0_irq_compat:
+	kernel_entry 0, 32
+	b	el0_irq_naked
+#endif
+
+el0_da:
+	/*
+	 * Data abort handling
+	 */
+	mrs	x0, far_el1
+	disable_step x1
+	isb
+	enable_dbg
+	// enable interrupts before calling the main handler
+	enable_irq
+	mov	x1, x25
+	mov	x2, sp
+	b	do_mem_abort
+el0_ia:
+	/*
+	 * Instruction abort handling
+	 */
+	mrs	x0, far_el1
+	disable_step x1
+	isb
+	enable_dbg
+	// enable interrupts before calling the main handler
+	enable_irq
+	orr	x1, x25, #1 << 24		// use reserved ISS bit for instruction aborts
+	mov	x2, sp
+	b	do_mem_abort
+el0_fpsimd_acc:
+	/*
+	 * Floating Point or Advanced SIMD access
+	 */
+	mov	x0, x25
+	mov	x1, sp
+	b	do_fpsimd_acc
+el0_fpsimd_exc:
+	/*
+	 * Floating Point or Advanced SIMD exception
+	 */
+	mov	x0, x25
+	mov	x1, sp
+	b	do_fpsimd_exc
+el0_sp_pc:
+	/*
+	 * Stack or PC alignment exception handling
+	 */
+	mrs	x0, far_el1
+	disable_step x1
+	isb
+	enable_dbg
+	// enable interrupts before calling the main handler
+	enable_irq
+	mov	x1, x25
+	mov	x2, sp
+	b	do_sp_pc_abort
+el0_undef:
+	/*
+	 * Undefined instruction
+	 */
+	mov	x0, sp
+	b	do_undefinstr
+el0_dbg:
+	/*
+	 * Debug exception handling
+	 */
+	tbnz	x24, #0, el0_inv		// EL0 only
+	mrs	x0, far_el1
+	disable_step x1
+	mov	x1, x25
+	mov	x2, sp
+	b	do_debug_exception
+el0_inv:
+	mov	x0, sp
+	mov	x1, #BAD_SYNC
+	mrs	x2, esr_el1
+	b	bad_mode
+ENDPROC(el0_sync)
+
+	.align	6
+el0_irq:
+	kernel_entry 0
+el0_irq_naked:
+	disable_step x1
+	isb
+	enable_dbg
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
+	get_thread_info tsk
+#ifdef CONFIG_PREEMPT
+	ldr	x24, [tsk, #TI_PREEMPT]		// get preempt count
+	add	x23, x24, #1			// increment it
+	str	x23, [tsk, #TI_PREEMPT]
+#endif
+	irq_handler
+#ifdef CONFIG_PREEMPT
+	ldr	x0, [tsk, #TI_PREEMPT]
+	str	x24, [tsk, #TI_PREEMPT]
+	cmp	x0, x23
+	b.eq	1f
+	mov	x1, #0
+	str	x1, [x1]			// BUG
+1:
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_on
+#endif
+	b	ret_to_user
+ENDPROC(el0_irq)
+
+/*
+ * This is the return code to user mode for abort handlers
+ */
+ret_from_exception:
+	get_thread_info tsk
+	b	ret_to_user
+ENDPROC(ret_from_exception)
+
+/*
+ * Register switch for AArch64. The callee-saved registers need to be saved
+ * and restored. On entry:
+ *   x0 = previous task_struct (must be preserved across the switch)
+ *   x1 = next task_struct
+ * Previous and next are guaranteed not to be the same.
+ *
+ */
+ENTRY(cpu_switch_to)
+	add	x8, x0, #THREAD_CPU_CONTEXT
+	mov	x9, sp
+	stp	x19, x20, [x8], #16		// store callee-saved registers
+	stp	x21, x22, [x8], #16
+	stp	x23, x24, [x8], #16
+	stp	x25, x26, [x8], #16
+	stp	x27, x28, [x8], #16
+	stp	x29, x9, [x8], #16
+	str	lr, [x8]
+	add	x8, x1, #THREAD_CPU_CONTEXT
+	ldp	x19, x20, [x8], #16		// restore callee-saved registers
+	ldp	x21, x22, [x8], #16
+	ldp	x23, x24, [x8], #16
+	ldp	x25, x26, [x8], #16
+	ldp	x27, x28, [x8], #16
+	ldp	x29, x9, [x8], #16
+	ldr	lr, [x8]
+	mov	sp, x9
+	ret
+ENDPROC(cpu_switch_to)
+
+/*
+ * This is the fast syscall return path.  We do as little as possible here,
+ * and this includes saving x0 back into the kernel stack.
+ */
+ret_fast_syscall:
+	disable_irq				// disable interrupts
+	ldr	x1, [tsk, #TI_FLAGS]
+	and	x2, x1, #_TIF_WORK_MASK
+	cbnz	x2, fast_work_pending
+	tbz	x1, #TIF_SINGLESTEP, fast_exit
+	disable_dbg
+	enable_step x2
+fast_exit:
+	kernel_exit 0, ret = 1
+
+/*
+ * Ok, we need to do extra processing, enter the slow path.
+ */
+fast_work_pending:
+	str	x0, [sp, #S_X0]			// returned x0
+work_pending:
+	tbnz	x1, #TIF_NEED_RESCHED, work_resched
+	/* TIF_SIGPENDING or TIF_NOTIFY_RESUME case */
+	ldr	x2, [sp, #S_PSTATE]
+	mov	x0, sp				// 'regs'
+	tst	x2, #PSR_MODE_MASK		// user mode regs?
+	b.ne	no_work_pending			// returning to kernel
+	bl	do_notify_resume
+	b	ret_to_user
+work_resched:
+	enable_dbg
+	bl	schedule
+
+/*
+ * "slow" syscall return path.
+ */
+ENTRY(ret_to_user)
+	disable_irq				// disable interrupts
+	ldr	x1, [tsk, #TI_FLAGS]
+	and	x2, x1, #_TIF_WORK_MASK
+	cbnz	x2, work_pending
+	tbz	x1, #TIF_SINGLESTEP, no_work_pending
+	disable_dbg
+	enable_step x2
+no_work_pending:
+	kernel_exit 0, ret = 0
+ENDPROC(ret_to_user)
+
+/*
+ * This is how we return from a fork.
+ */
+ENTRY(ret_from_fork)
+	bl	schedule_tail
+	get_thread_info tsk
+	b	ret_to_user
+ENDPROC(ret_from_fork)
+
+/*
+ * SVC handler.
+ */
+	.align	6
+el0_svc:
+	adrp	stbl, sys_call_table		// load syscall table pointer
+	uxtw	scno, w8			// syscall number in w8
+	mov	sc_nr, #__NR_syscalls
+el0_svc_naked:					// compat entry point
+	stp	x0, scno, [sp, #S_ORIG_X0]	// save the original x0 and syscall number
+	disable_step x16
+	isb
+	enable_dbg
+	enable_irq
+
+	get_thread_info tsk
+	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
+	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+	adr	lr, ret_fast_syscall		// return address
+	cmp     scno, sc_nr                     // check upper syscall limit
+	b.hs	ni_sys
+	ldr	x16, [stbl, scno, lsl #3]	// address in the syscall table
+	br	x16				// call sys_* routine
+ni_sys:
+	mov	x0, sp
+	b	do_ni_syscall
+ENDPROC(el0_svc)
+
+	/*
+	 * This is the really slow path.  We're going to be doing context
+	 * switches, and waiting for our parent to respond.
+	 */
+__sys_trace:
+	mov	x1, sp
+	mov	w0, #0				// trace entry
+	bl	syscall_trace
+	adr	lr, __sys_trace_return		// return address
+	uxtw	scno, w0			// syscall number (possibly new)
+	mov	x1, sp				// pointer to regs
+	cmp	scno, sc_nr			// check upper syscall limit
+	b.hs	ni_sys
+	ldp	x0, x1, [sp]			// restore the syscall args
+	ldp	x2, x3, [sp, #S_X2]
+	ldp	x4, x5, [sp, #S_X4]
+	ldp	x6, x7, [sp, #S_X6]
+	ldr	x16, [stbl, scno, lsl #3]	// address in the syscall table
+	br	x16				// call sys_* routine
+
+__sys_trace_return:
+	str	x0, [sp]			// save returned x0
+	mov	x1, sp
+	mov	w0, #1				// trace exit
+	bl	syscall_trace
+	b	ret_to_user
+
+/*
+ * Special system call wrappers.
+ */
+ENTRY(sys_execve_wrapper)
+	mov	x3, sp
+	b	sys_execve
+ENDPROC(sys_execve_wrapper)
+
+ENTRY(sys_clone_wrapper)
+	mov	x5, sp
+	b	sys_clone
+ENDPROC(sys_clone_wrapper)
+
+ENTRY(sys_rt_sigreturn_wrapper)
+	mov	x0, sp
+	b	sys_rt_sigreturn
+ENDPROC(sys_rt_sigreturn_wrapper)
+
+ENTRY(sys_sigaltstack_wrapper)
+	ldr	x2, [sp, #S_SP]
+	b	sys_sigaltstack
+ENDPROC(sys_sigaltstack_wrapper)
+
+ENTRY(handle_arch_irq)
+	.quad	0
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
new file mode 100644
index 000000000000..e8b8357aedb4
--- /dev/null
+++ b/arch/arm64/kernel/fpsimd.c
@@ -0,0 +1,106 @@
+/*
+ * FP/SIMD context switching and fault handling
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+
+#include <asm/fpsimd.h>
+#include <asm/cputype.h>
+
+#define FPEXC_IOF	(1 << 0)
+#define FPEXC_DZF	(1 << 1)
+#define FPEXC_OFF	(1 << 2)
+#define FPEXC_UFF	(1 << 3)
+#define FPEXC_IXF	(1 << 4)
+#define FPEXC_IDF	(1 << 7)
+
+/*
+ * Trapped FP/ASIMD access.
+ */
+void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
+{
+	/* TODO: implement lazy context saving/restoring */
+	WARN_ON(1);
+}
+
+/*
+ * Raise a SIGFPE for the current process.
+ */
+void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
+{
+	siginfo_t info;
+	unsigned int si_code = 0;
+
+	if (esr & FPEXC_IOF)
+		si_code = FPE_FLTINV;
+	else if (esr & FPEXC_DZF)
+		si_code = FPE_FLTDIV;
+	else if (esr & FPEXC_OFF)
+		si_code = FPE_FLTOVF;
+	else if (esr & FPEXC_UFF)
+		si_code = FPE_FLTUND;
+	else if (esr & FPEXC_IXF)
+		si_code = FPE_FLTRES;
+
+	memset(&info, 0, sizeof(info));
+	info.si_signo = SIGFPE;
+	info.si_code = si_code;
+	info.si_addr = (void __user *)instruction_pointer(regs);
+
+	send_sig_info(SIGFPE, &info, current);
+}
+
+void fpsimd_thread_switch(struct task_struct *next)
+{
+	/* check if not kernel threads */
+	if (current->mm)
+		fpsimd_save_state(&current->thread.fpsimd_state);
+	if (next->mm)
+		fpsimd_load_state(&next->thread.fpsimd_state);
+}
+
+void fpsimd_flush_thread(void)
+{
+	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
+	fpsimd_load_state(&current->thread.fpsimd_state);
+}
+
+/*
+ * FP/SIMD support code initialisation.
+ */
+static int __init fpsimd_init(void)
+{
+	u64 pfr = read_cpuid(ID_AA64PFR0_EL1);
+
+	if (pfr & (0xf << 16)) {
+		pr_notice("Floating-point is not implemented\n");
+		return 0;
+	}
+	elf_hwcap |= HWCAP_FP;
+
+	if (pfr & (0xf << 20))
+		pr_notice("Advanced SIMD is not implemented\n");
+	else
+		elf_hwcap |= HWCAP_ASIMD;
+
+	return 0;
+}
+late_initcall(fpsimd_init);
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
new file mode 100644
index 000000000000..a2f02b63eae9
--- /dev/null
+++ b/arch/arm64/kernel/head.S
@@ -0,0 +1,510 @@
+/*
+ * Low-level CPU initialisation
+ * Based on arch/arm/kernel/head.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2012 ARM Ltd.
+ * Authors:	Catalin Marinas <catalin.marinas@arm.com>
+ *		Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <asm/memory.h>
+#include <asm/thread_info.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+
+/*
+ * swapper_pg_dir is the virtual address of the initial page table. We place
+ * the page tables 3 * PAGE_SIZE below KERNEL_RAM_VADDR. The idmap_pg_dir has
+ * 2 pages and is placed below swapper_pg_dir.
+ */
+#define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
+
+#if (KERNEL_RAM_VADDR & 0xfffff) != 0x80000
+#error KERNEL_RAM_VADDR must start at 0xXXX80000
+#endif
+
+#define SWAPPER_DIR_SIZE	(3 * PAGE_SIZE)
+#define IDMAP_DIR_SIZE		(2 * PAGE_SIZE)
+
+	.globl	swapper_pg_dir
+	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - SWAPPER_DIR_SIZE
+
+	.globl	idmap_pg_dir
+	.equ	idmap_pg_dir, swapper_pg_dir - IDMAP_DIR_SIZE
+
+	.macro	pgtbl, ttb0, ttb1, phys
+	add	\ttb1, \phys, #TEXT_OFFSET - SWAPPER_DIR_SIZE
+	sub	\ttb0, \ttb1, #IDMAP_DIR_SIZE
+	.endm
+
+#ifdef CONFIG_ARM64_64K_PAGES
+#define BLOCK_SHIFT	PAGE_SHIFT
+#define BLOCK_SIZE	PAGE_SIZE
+#else
+#define BLOCK_SHIFT	SECTION_SHIFT
+#define BLOCK_SIZE	SECTION_SIZE
+#endif
+
+#define KERNEL_START	KERNEL_RAM_VADDR
+#define KERNEL_END	_end
+
+/*
+ * Initial memory map attributes.
+ */
+#ifndef CONFIG_SMP
+#define PTE_FLAGS	PTE_TYPE_PAGE | PTE_AF
+#define PMD_FLAGS	PMD_TYPE_SECT | PMD_SECT_AF
+#else
+#define PTE_FLAGS	PTE_TYPE_PAGE | PTE_AF | PTE_SHARED
+#define PMD_FLAGS	PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S
+#endif
+
+#ifdef CONFIG_ARM64_64K_PAGES
+#define MM_MMUFLAGS	PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS
+#define IO_MMUFLAGS	PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_XN | PTE_FLAGS
+#else
+#define MM_MMUFLAGS	PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS
+#define IO_MMUFLAGS	PMD_ATTRINDX(MT_DEVICE_nGnRE) | PMD_SECT_XN | PMD_FLAGS
+#endif
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * The requirements are:
+ *   MMU = off, D-cache = off, I-cache = on or off,
+ *   x0 = physical address to the FDT blob.
+ *
+ * This code is mostly position independent so you call this at
+ * __pa(PAGE_OFFSET + TEXT_OFFSET).
+ *
+ * Note that the callee-saved registers are used for storing variables
+ * that are useful before the MMU is enabled. The allocations are described
+ * in the entry routines.
+ */
+	__HEAD
+
+	/*
+	 * DO NOT MODIFY. Image header expected by Linux boot-loaders.
+	 */
+	b	stext				// branch to kernel start, magic
+	.long	0				// reserved
+	.quad	TEXT_OFFSET			// Image load offset from start of RAM
+	.quad	0				// reserved
+	.quad	0				// reserved
+
+ENTRY(stext)
+	mov	x21, x0				// x21=FDT
+	bl	el2_setup			// Drop to EL1
+	mrs	x22, midr_el1			// x22=cpuid
+	mov	x0, x22
+	bl	lookup_processor_type
+	mov	x23, x0				// x23=current cpu_table
+	cbz	x23, __error_p			// invalid processor (x23=0)?
+	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+	bl	__vet_fdt
+	bl	__create_page_tables		// x25=TTBR0, x26=TTBR1
+	/*
+	 * The following calls CPU specific code in a position independent
+	 * manner. See arch/arm64/mm/proc.S for details. x23 = base of
+	 * cpu_info structure selected by lookup_processor_type above.
+	 * On return, the CPU will be ready for the MMU to be turned on and
+	 * the TCR will have been set.
+	 */
+	ldr	x27, __switch_data		// address to jump to after
+						// MMU has been enabled
+	adr	lr, __enable_mmu		// return (PIC) address
+	ldr	x12, [x23, #CPU_INFO_SETUP]
+	add	x12, x12, x28			// __virt_to_phys
+	br	x12				// initialise processor
+ENDPROC(stext)
+
+/*
+ * If we're fortunate enough to boot at EL2, ensure that the world is
+ * sane before dropping to EL1.
+ */
+ENTRY(el2_setup)
+	mrs	x0, CurrentEL
+	cmp	x0, #PSR_MODE_EL2t
+	ccmp	x0, #PSR_MODE_EL2h, #0x4, ne
+	b.eq	1f
+	ret
+
+	/* Hyp configuration. */
+1:	mov	x0, #(1 << 31)			// 64-bit EL1
+	msr	hcr_el2, x0
+
+	/* Generic timers. */
+	mrs	x0, cnthctl_el2
+	orr	x0, x0, #3			// Enable EL1 physical timers
+	msr	cnthctl_el2, x0
+
+	/* Populate ID registers. */
+	mrs	x0, midr_el1
+	mrs	x1, mpidr_el1
+	msr	vpidr_el2, x0
+	msr	vmpidr_el2, x1
+
+	/* sctlr_el1 */
+	mov	x0, #0x0800			// Set/clear RES{1,0} bits
+	movk	x0, #0x30d0, lsl #16
+	msr	sctlr_el1, x0
+
+	/* Coprocessor traps. */
+	mov	x0, #0x33ff
+	msr	cptr_el2, x0			// Disable copro. traps to EL2
+
+#ifdef CONFIG_COMPAT
+	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
+#endif
+
+	/* spsr */
+	mov	x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
+		      PSR_MODE_EL1h)
+	msr	spsr_el2, x0
+	msr	elr_el2, lr
+	eret
+ENDPROC(el2_setup)
+
+	.align	3
+2:	.quad	.
+	.quad	PAGE_OFFSET
+
+#ifdef CONFIG_SMP
+	.pushsection    .smp.pen.text, "ax"
+	.align	3
+1:	.quad	.
+	.quad	secondary_holding_pen_release
+
+	/*
+	 * This provides a "holding pen" for platforms to hold all secondary
+	 * cores are held until we're ready for them to initialise.
+	 */
+ENTRY(secondary_holding_pen)
+	bl	el2_setup			// Drop to EL1
+	mrs	x0, mpidr_el1
+	and	x0, x0, #15			// CPU number
+	adr	x1, 1b
+	ldp	x2, x3, [x1]
+	sub	x1, x1, x2
+	add	x3, x3, x1
+pen:	ldr	x4, [x3]
+	cmp	x4, x0
+	b.eq	secondary_startup
+	wfe
+	b	pen
+ENDPROC(secondary_holding_pen)
+	.popsection
+
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 */
+	mrs	x22, midr_el1			// x22=cpuid
+	mov	x0, x22
+	bl	lookup_processor_type
+	mov	x23, x0				// x23=current cpu_table
+	cbz	x23, __error_p			// invalid processor (x23=0)?
+
+	bl	__calc_phys_offset		// x24=phys offset
+	pgtbl	x25, x26, x24			// x25=TTBR0, x26=TTBR1
+	ldr	x12, [x23, #CPU_INFO_SETUP]
+	add	x12, x12, x28			// __virt_to_phys
+	blr	x12				// initialise processor
+
+	ldr	x21, =secondary_data
+	ldr	x27, =__secondary_switched	// address to jump to after enabling the MMU
+	b	__enable_mmu
+ENDPROC(secondary_startup)
+
+ENTRY(__secondary_switched)
+	ldr	x0, [x21]			// get secondary_data.stack
+	mov	sp, x0
+	mov	x29, #0
+	b	secondary_start_kernel
+ENDPROC(__secondary_switched)
+#endif	/* CONFIG_SMP */
+
+/*
+ * Setup common bits before finally enabling the MMU. Essentially this is just
+ * loading the page table pointer and vector base registers.
+ *
+ * On entry to this code, x0 must contain the SCTLR_EL1 value for turning on
+ * the MMU.
+ */
+__enable_mmu:
+	ldr	x5, =vectors
+	msr	vbar_el1, x5
+	msr	ttbr0_el1, x25			// load TTBR0
+	msr	ttbr1_el1, x26			// load TTBR1
+	isb
+	b	__turn_mmu_on
+ENDPROC(__enable_mmu)
+
+/*
+ * Enable the MMU. This completely changes the structure of the visible memory
+ * space. You will not be able to trace execution through this.
+ *
+ *  x0  = system control register
+ *  x27 = *virtual* address to jump to upon completion
+ *
+ * other registers depend on the function called upon completion
+ */
+	.align	6
+__turn_mmu_on:
+	msr	sctlr_el1, x0
+	isb
+	br	x27
+ENDPROC(__turn_mmu_on)
+
+/*
+ * Calculate the start of physical memory.
+ */
+__calc_phys_offset:
+	adr	x0, 1f
+	ldp	x1, x2, [x0]
+	sub	x28, x0, x1			// x28 = PHYS_OFFSET - PAGE_OFFSET
+	add	x24, x2, x28			// x24 = PHYS_OFFSET
+	ret
+ENDPROC(__calc_phys_offset)
+
+	.align 3
+1:	.quad	.
+	.quad	PAGE_OFFSET
+
+/*
+ * Macro to populate the PGD for the corresponding block entry in the next
+ * level (tbl) for the given virtual address.
+ *
+ * Preserves:	pgd, tbl, virt
+ * Corrupts:	tmp1, tmp2
+ */
+	.macro	create_pgd_entry, pgd, tbl, virt, tmp1, tmp2
+	lsr	\tmp1, \virt, #PGDIR_SHIFT
+	and	\tmp1, \tmp1, #PTRS_PER_PGD - 1	// PGD index
+	orr	\tmp2, \tbl, #3			// PGD entry table type
+	str	\tmp2, [\pgd, \tmp1, lsl #3]
+	.endm
+
+/*
+ * Macro to populate block entries in the page table for the start..end
+ * virtual range (inclusive).
+ *
+ * Preserves:	tbl, flags
+ * Corrupts:	phys, start, end, pstate
+ */
+	.macro	create_block_map, tbl, flags, phys, start, end, idmap=0
+	lsr	\phys, \phys, #BLOCK_SHIFT
+	.if	\idmap
+	and	\start, \phys, #PTRS_PER_PTE - 1	// table index
+	.else
+	lsr	\start, \start, #BLOCK_SHIFT
+	and	\start, \start, #PTRS_PER_PTE - 1	// table index
+	.endif
+	orr	\phys, \flags, \phys, lsl #BLOCK_SHIFT	// table entry
+	.ifnc	\start,\end
+	lsr	\end, \end, #BLOCK_SHIFT
+	and	\end, \end, #PTRS_PER_PTE - 1		// table end index
+	.endif
+9999:	str	\phys, [\tbl, \start, lsl #3]		// store the entry
+	.ifnc	\start,\end
+	add	\start, \start, #1			// next entry
+	add	\phys, \phys, #BLOCK_SIZE		// next block
+	cmp	\start, \end
+	b.ls	9999b
+	.endif
+	.endm
+
+/*
+ * Setup the initial page tables. We only setup the barest amount which is
+ * required to get the kernel running. The following sections are required:
+ *   - identity mapping to enable the MMU (low address, TTBR0)
+ *   - first few MB of the kernel linear mapping to jump to once the MMU has
+ *     been enabled, including the FDT blob (TTBR1)
+ */
+__create_page_tables:
+	pgtbl	x25, x26, x24			// idmap_pg_dir and swapper_pg_dir addresses
+
+	/*
+	 * Clear the idmap and swapper page tables.
+	 */
+	mov	x0, x25
+	add	x6, x26, #SWAPPER_DIR_SIZE
+1:	stp	xzr, xzr, [x0], #16
+	stp	xzr, xzr, [x0], #16
+	stp	xzr, xzr, [x0], #16
+	stp	xzr, xzr, [x0], #16
+	cmp	x0, x6
+	b.lo	1b
+
+	ldr	x7, =MM_MMUFLAGS
+
+	/*
+	 * Create the identity mapping.
+	 */
+	add	x0, x25, #PAGE_SIZE		// section table address
+	adr	x3, __turn_mmu_on		// virtual/physical address
+	create_pgd_entry x25, x0, x3, x5, x6
+	create_block_map x0, x7, x3, x5, x5, idmap=1
+
+	/*
+	 * Map the kernel image (starting with PHYS_OFFSET).
+	 */
+	add	x0, x26, #PAGE_SIZE		// section table address
+	mov	x5, #PAGE_OFFSET
+	create_pgd_entry x26, x0, x5, x3, x6
+	ldr	x6, =KERNEL_END - 1
+	mov	x3, x24				// phys offset
+	create_block_map x0, x7, x3, x5, x6
+
+	/*
+	 * Map the FDT blob (maximum 2MB; must be within 512MB of
+	 * PHYS_OFFSET).
+	 */
+	mov	x3, x21				// FDT phys address
+	and	x3, x3, #~((1 << 21) - 1)	// 2MB aligned
+	mov	x6, #PAGE_OFFSET
+	sub	x5, x3, x24			// subtract PHYS_OFFSET
+	tst	x5, #~((1 << 29) - 1)		// within 512MB?
+	csel	x21, xzr, x21, ne		// zero the FDT pointer
+	b.ne	1f
+	add	x5, x5, x6			// __va(FDT blob)
+	add	x6, x5, #1 << 21		// 2MB for the FDT blob
+	sub	x6, x6, #1			// inclusive range
+	create_block_map x0, x7, x3, x5, x6
+1:
+	ret
+ENDPROC(__create_page_tables)
+	.ltorg
+
+	.align	3
+	.type	__switch_data, %object
+__switch_data:
+	.quad	__mmap_switched
+	.quad	__data_loc			// x4
+	.quad	_data				// x5
+	.quad	__bss_start			// x6
+	.quad	_end				// x7
+	.quad	processor_id			// x4
+	.quad	__fdt_pointer			// x5
+	.quad	memstart_addr			// x6
+	.quad	init_thread_union + THREAD_START_SP // sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode, and
+ * uses absolute addresses; this is not position independent.
+ */
+__mmap_switched:
+	adr	x3, __switch_data + 8
+
+	ldp	x4, x5, [x3], #16
+	ldp	x6, x7, [x3], #16
+	cmp	x4, x5				// Copy data segment if needed
+1:	ccmp	x5, x6, #4, ne
+	b.eq	2f
+	ldr	x16, [x4], #8
+	str	x16, [x5], #8
+	b	1b
+2:
+1:	cmp	x6, x7
+	b.hs	2f
+	str	xzr, [x6], #8			// Clear BSS
+	b	1b
+2:
+	ldp	x4, x5, [x3], #16
+	ldr	x6, [x3], #8
+	ldr	x16, [x3]
+	mov	sp, x16
+	str	x22, [x4]			// Save processor ID
+	str	x21, [x5]			// Save FDT pointer
+	str	x24, [x6]			// Save PHYS_OFFSET
+	mov	x29, #0
+	b	start_kernel
+ENDPROC(__mmap_switched)
+
+/*
+ * Exception handling. Something went wrong and we can't proceed. We ought to
+ * tell the user, but since we don't have any guarantee that we're even
+ * running on the right architecture, we do virtually nothing.
+ */
+__error_p:
+ENDPROC(__error_p)
+
+__error:
+1:	nop
+	b	1b
+ENDPROC(__error)
+
+/*
+ * This function gets the processor ID in w0 and searches the cpu_table[] for
+ * a match. It returns a pointer to the struct cpu_info it found. The
+ * cpu_table[] must end with an empty (all zeros) structure.
+ *
+ * This routine can be called via C code and it needs to work with the MMU
+ * both disabled and enabled (the offset is calculated automatically).
+ */
+ENTRY(lookup_processor_type)
+	adr	x1, __lookup_processor_type_data
+	ldp	x2, x3, [x1]
+	sub	x1, x1, x2			// get offset between VA and PA
+	add	x3, x3, x1			// convert VA to PA
+1:
+	ldp	w5, w6, [x3]			// load cpu_id_val and cpu_id_mask
+	cbz	w5, 2f				// end of list?
+	and	w6, w6, w0
+	cmp	w5, w6
+	b.eq	3f
+	add	x3, x3, #CPU_INFO_SZ
+	b	1b
+2:
+	mov	x3, #0				// unknown processor
+3:
+	mov	x0, x3
+	ret
+ENDPROC(lookup_processor_type)
+
+	.align	3
+	.type	__lookup_processor_type_data, %object
+__lookup_processor_type_data:
+	.quad	.
+	.quad	cpu_table
+	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
+
+/*
+ * Determine validity of the x21 FDT pointer.
+ * The dtb must be 8-byte aligned and live in the first 512M of memory.
+ */
+__vet_fdt:
+	tst	x21, #0x7
+	b.ne	1f
+	cmp	x21, x24
+	b.lt	1f
+	mov	x0, #(1 << 29)
+	add	x0, x0, x24
+	cmp	x21, x0
+	b.ge	1f
+	ret
+1:
+	mov	x21, #0
+	ret
+ENDPROC(__vet_fdt)
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
new file mode 100644
index 000000000000..5ab825c59db9
--- /dev/null
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -0,0 +1,880 @@
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ *
+ * Copyright (C) 2012 ARM Limited
+ * Author: Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) "hw-breakpoint: " fmt
+
+#include <linux/errno.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+
+#include <asm/compat.h>
+#include <asm/current.h>
+#include <asm/debug-monitors.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/kdebug.h>
+#include <asm/traps.h>
+#include <asm/cputype.h>
+#include <asm/system_misc.h>
+
+/* Breakpoint currently in use for each BRP. */
+static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
+
+/* Watchpoint currently in use for each WRP. */
+static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
+
+/* Currently stepping a per-CPU kernel breakpoint. */
+static DEFINE_PER_CPU(int, stepping_kernel_bp);
+
+/* Number of BRP/WRP registers on this CPU. */
+static int core_num_brps;
+static int core_num_wrps;
+
+/* Determine number of BRP registers available. */
+static int get_num_brps(void)
+{
+	return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
+}
+
+/* Determine number of WRP registers available. */
+static int get_num_wrps(void)
+{
+	return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
+}
+
+int hw_breakpoint_slots(int type)
+{
+	/*
+	 * We can be called early, so don't rely on
+	 * our static variables being initialised.
+	 */
+	switch (type) {
+	case TYPE_INST:
+		return get_num_brps();
+	case TYPE_DATA:
+		return get_num_wrps();
+	default:
+		pr_warning("unknown slot type: %d\n", type);
+		return 0;
+	}
+}
+
+#define READ_WB_REG_CASE(OFF, N, REG, VAL)	\
+	case (OFF + N):				\
+		AARCH64_DBG_READ(N, REG, VAL);	\
+		break
+
+#define WRITE_WB_REG_CASE(OFF, N, REG, VAL)	\
+	case (OFF + N):				\
+		AARCH64_DBG_WRITE(N, REG, VAL);	\
+		break
+
+#define GEN_READ_WB_REG_CASES(OFF, REG, VAL)	\
+	READ_WB_REG_CASE(OFF,  0, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  1, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  2, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  3, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  4, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  5, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  6, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  7, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  8, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  9, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 10, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 11, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 12, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 13, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 14, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 15, REG, VAL)
+
+#define GEN_WRITE_WB_REG_CASES(OFF, REG, VAL)	\
+	WRITE_WB_REG_CASE(OFF,  0, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  1, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  2, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  3, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  4, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  5, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  6, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  7, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  8, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  9, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 10, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 11, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 12, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 13, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 14, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 15, REG, VAL)
+
+static u64 read_wb_reg(int reg, int n)
+{
+	u64 val = 0;
+
+	switch (reg + n) {
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val);
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val);
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val);
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val);
+	default:
+		pr_warning("attempt to read from unknown breakpoint register %d\n", n);
+	}
+
+	return val;
+}
+
+static void write_wb_reg(int reg, int n, u64 val)
+{
+	switch (reg + n) {
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val);
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val);
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val);
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val);
+	default:
+		pr_warning("attempt to write to unknown breakpoint register %d\n", n);
+	}
+	isb();
+}
+
+/*
+ * Convert a breakpoint privilege level to the corresponding exception
+ * level.
+ */
+static enum debug_el debug_exception_level(int privilege)
+{
+	switch (privilege) {
+	case AARCH64_BREAKPOINT_EL0:
+		return DBG_ACTIVE_EL0;
+	case AARCH64_BREAKPOINT_EL1:
+		return DBG_ACTIVE_EL1;
+	default:
+		pr_warning("invalid breakpoint privilege level %d\n", privilege);
+		return -EINVAL;
+	}
+}
+
+/*
+ * Install a perf counter breakpoint.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot, **slots;
+	struct debug_info *debug_info = &current->thread.debug;
+	int i, max_slots, ctrl_reg, val_reg, reg_enable;
+	u32 ctrl;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		ctrl_reg = AARCH64_DBG_REG_BCR;
+		val_reg = AARCH64_DBG_REG_BVR;
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps;
+		reg_enable = !debug_info->bps_disabled;
+	} else {
+		/* Watchpoint */
+		ctrl_reg = AARCH64_DBG_REG_WCR;
+		val_reg = AARCH64_DBG_REG_WVR;
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+		reg_enable = !debug_info->wps_disabled;
+	}
+
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
+		return -ENOSPC;
+
+	/* Ensure debug monitors are enabled at the correct exception level.  */
+	enable_debug_monitors(debug_exception_level(info->ctrl.privilege));
+
+	/* Setup the address register. */
+	write_wb_reg(val_reg, i, info->address);
+
+	/* Setup the control register. */
+	ctrl = encode_ctrl_reg(info->ctrl);
+	write_wb_reg(ctrl_reg, i, reg_enable ? ctrl | 0x1 : ctrl & ~0x1);
+
+	return 0;
+}
+
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot, **slots;
+	int i, max_slots, base;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		base = AARCH64_DBG_REG_BCR;
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps;
+	} else {
+		/* Watchpoint */
+		base = AARCH64_DBG_REG_WCR;
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+	}
+
+	/* Remove the breakpoint. */
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
+		return;
+
+	/* Reset the control register. */
+	write_wb_reg(base, i, 0);
+
+	/* Release the debug monitors for the correct exception level.  */
+	disable_debug_monitors(debug_exception_level(info->ctrl.privilege));
+}
+
+static int get_hbp_len(u8 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case ARM_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+	}
+
+	return len_in_bytes;
+}
+
+/*
+ * Check whether bp virtual address is in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	va = info->address;
+	len = get_hbp_len(info->ctrl.len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl.
+ * Hopefully this will disappear when ptrace can bypass the conversion
+ * to generic breakpoint descriptions.
+ */
+int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+			   int *gen_len, int *gen_type)
+{
+	/* Type */
+	switch (ctrl.type) {
+	case ARM_BREAKPOINT_EXECUTE:
+		*gen_type = HW_BREAKPOINT_X;
+		break;
+	case ARM_BREAKPOINT_LOAD:
+		*gen_type = HW_BREAKPOINT_R;
+		break;
+	case ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_RW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (ctrl.len) {
+	case ARM_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Construct an arch_hw_breakpoint from a perf_event.
+ */
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_X:
+		info->ctrl.type = ARM_BREAKPOINT_EXECUTE;
+		break;
+	case HW_BREAKPOINT_R:
+		info->ctrl.type = ARM_BREAKPOINT_LOAD;
+		break;
+	case HW_BREAKPOINT_W:
+		info->ctrl.type = ARM_BREAKPOINT_STORE;
+		break;
+	case HW_BREAKPOINT_RW:
+		info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_4;
+		break;
+	case HW_BREAKPOINT_LEN_8:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * On AArch64, we only permit breakpoints of length 4, whereas
+	 * AArch32 also requires breakpoints of length 2 for Thumb.
+	 * Watchpoints can be of length 1, 2, 4 or 8 bytes.
+	 */
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		if (is_compat_task()) {
+			if (info->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
+			    info->ctrl.len != ARM_BREAKPOINT_LEN_4)
+				return -EINVAL;
+		} else if (info->ctrl.len != ARM_BREAKPOINT_LEN_4) {
+			/*
+			 * FIXME: Some tools (I'm looking at you perf) assume
+			 *	  that breakpoints should be sizeof(long). This
+			 *	  is nonsense. For now, we fix up the parameter
+			 *	  but we should probably return -EINVAL instead.
+			 */
+			info->ctrl.len = ARM_BREAKPOINT_LEN_4;
+		}
+	}
+
+	/* Address */
+	info->address = bp->attr.bp_addr;
+
+	/*
+	 * Privilege
+	 * Note that we disallow combined EL0/EL1 breakpoints because
+	 * that would complicate the stepping code.
+	 */
+	if (arch_check_bp_in_kernelspace(bp))
+		info->ctrl.privilege = AARCH64_BREAKPOINT_EL1;
+	else
+		info->ctrl.privilege = AARCH64_BREAKPOINT_EL0;
+
+	/* Enabled? */
+	info->ctrl.enabled = !bp->attr.disabled;
+
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings.
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int ret;
+	u64 alignment_mask, offset;
+
+	/* Build the arch_hw_breakpoint. */
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check address alignment.
+	 * We don't do any clever alignment correction for watchpoints
+	 * because using 64-bit unaligned addresses is deprecated for
+	 * AArch64.
+	 *
+	 * AArch32 tasks expect some simple alignment fixups, so emulate
+	 * that here.
+	 */
+	if (is_compat_task()) {
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+			alignment_mask = 0x7;
+		else
+			alignment_mask = 0x3;
+		offset = info->address & alignment_mask;
+		switch (offset) {
+		case 0:
+			/* Aligned */
+			break;
+		case 1:
+			/* Allow single byte watchpoint. */
+			if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+				break;
+		case 2:
+			/* Allow halfword watchpoints and breakpoints. */
+			if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
+				break;
+		default:
+			return -EINVAL;
+		}
+
+		info->address &= ~alignment_mask;
+		info->ctrl.len <<= offset;
+	} else {
+		if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE)
+			alignment_mask = 0x3;
+		else
+			alignment_mask = 0x7;
+		if (info->address & alignment_mask)
+			return -EINVAL;
+	}
+
+	/*
+	 * Disallow per-task kernel breakpoints since these would
+	 * complicate the stepping code.
+	 */
+	if (info->ctrl.privilege == AARCH64_BREAKPOINT_EL1 && bp->hw.bp_target)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Enable/disable all of the breakpoints active at the specified
+ * exception level at the register level.
+ * This is used when single-stepping after a breakpoint exception.
+ */
+static void toggle_bp_registers(int reg, enum debug_el el, int enable)
+{
+	int i, max_slots, privilege;
+	u32 ctrl;
+	struct perf_event **slots;
+
+	switch (reg) {
+	case AARCH64_DBG_REG_BCR:
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps;
+		break;
+	case AARCH64_DBG_REG_WCR:
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+		break;
+	default:
+		return;
+	}
+
+	for (i = 0; i < max_slots; ++i) {
+		if (!slots[i])
+			continue;
+
+		privilege = counter_arch_bp(slots[i])->ctrl.privilege;
+		if (debug_exception_level(privilege) != el)
+			continue;
+
+		ctrl = read_wb_reg(reg, i);
+		if (enable)
+			ctrl |= 0x1;
+		else
+			ctrl &= ~0x1;
+		write_wb_reg(reg, i, ctrl);
+	}
+}
+
+/*
+ * Debug exception handlers.
+ */
+static int breakpoint_handler(unsigned long unused, unsigned int esr,
+			      struct pt_regs *regs)
+{
+	int i, step = 0, *kernel_step;
+	u32 ctrl_reg;
+	u64 addr, val;
+	struct perf_event *bp, **slots;
+	struct debug_info *debug_info;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+	addr = instruction_pointer(regs);
+	debug_info = &current->thread.debug;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		rcu_read_lock();
+
+		bp = slots[i];
+
+		if (bp == NULL)
+			goto unlock;
+
+		/* Check if the breakpoint value matches. */
+		val = read_wb_reg(AARCH64_DBG_REG_BVR, i);
+		if (val != (addr & ~0x3))
+			goto unlock;
+
+		/* Possible match, check the byte address select to confirm. */
+		ctrl_reg = read_wb_reg(AARCH64_DBG_REG_BCR, i);
+		decode_ctrl_reg(ctrl_reg, &ctrl);
+		if (!((1 << (addr & 0x3)) & ctrl.len))
+			goto unlock;
+
+		counter_arch_bp(bp)->trigger = addr;
+		perf_bp_event(bp, regs);
+
+		/* Do we need to handle the stepping? */
+		if (!bp->overflow_handler)
+			step = 1;
+unlock:
+		rcu_read_unlock();
+	}
+
+	if (!step)
+		return 0;
+
+	if (user_mode(regs)) {
+		debug_info->bps_disabled = 1;
+		toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 0);
+
+		/* If we're already stepping a watchpoint, just return. */
+		if (debug_info->wps_disabled)
+			return 0;
+
+		if (test_thread_flag(TIF_SINGLESTEP))
+			debug_info->suspended_step = 1;
+		else
+			user_enable_single_step(current);
+	} else {
+		toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 0);
+		kernel_step = &__get_cpu_var(stepping_kernel_bp);
+
+		if (*kernel_step != ARM_KERNEL_STEP_NONE)
+			return 0;
+
+		if (kernel_active_single_step()) {
+			*kernel_step = ARM_KERNEL_STEP_SUSPEND;
+		} else {
+			*kernel_step = ARM_KERNEL_STEP_ACTIVE;
+			kernel_enable_single_step(regs);
+		}
+	}
+
+	return 0;
+}
+
+static int watchpoint_handler(unsigned long addr, unsigned int esr,
+			      struct pt_regs *regs)
+{
+	int i, step = 0, *kernel_step, access;
+	u32 ctrl_reg;
+	u64 val, alignment_mask;
+	struct perf_event *wp, **slots;
+	struct debug_info *debug_info;
+	struct arch_hw_breakpoint *info;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+	debug_info = &current->thread.debug;
+
+	for (i = 0; i < core_num_wrps; ++i) {
+		rcu_read_lock();
+
+		wp = slots[i];
+
+		if (wp == NULL)
+			goto unlock;
+
+		info = counter_arch_bp(wp);
+		/* AArch32 watchpoints are either 4 or 8 bytes aligned. */
+		if (is_compat_task()) {
+			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+				alignment_mask = 0x7;
+			else
+				alignment_mask = 0x3;
+		} else {
+			alignment_mask = 0x7;
+		}
+
+		/* Check if the watchpoint value matches. */
+		val = read_wb_reg(AARCH64_DBG_REG_WVR, i);
+		if (val != (addr & ~alignment_mask))
+			goto unlock;
+
+		/* Possible match, check the byte address select to confirm. */
+		ctrl_reg = read_wb_reg(AARCH64_DBG_REG_WCR, i);
+		decode_ctrl_reg(ctrl_reg, &ctrl);
+		if (!((1 << (addr & alignment_mask)) & ctrl.len))
+			goto unlock;
+
+		/*
+		 * Check that the access type matches.
+		 * 0 => load, otherwise => store
+		 */
+		access = (esr & AARCH64_ESR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+			 HW_BREAKPOINT_R;
+		if (!(access & hw_breakpoint_type(wp)))
+			goto unlock;
+
+		info->trigger = addr;
+		perf_bp_event(wp, regs);
+
+		/* Do we need to handle the stepping? */
+		if (!wp->overflow_handler)
+			step = 1;
+
+unlock:
+		rcu_read_unlock();
+	}
+
+	if (!step)
+		return 0;
+
+	/*
+	 * We always disable EL0 watchpoints because the kernel can
+	 * cause these to fire via an unprivileged access.
+	 */
+	toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 0);
+
+	if (user_mode(regs)) {
+		debug_info->wps_disabled = 1;
+
+		/* If we're already stepping a breakpoint, just return. */
+		if (debug_info->bps_disabled)
+			return 0;
+
+		if (test_thread_flag(TIF_SINGLESTEP))
+			debug_info->suspended_step = 1;
+		else
+			user_enable_single_step(current);
+	} else {
+		toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 0);
+		kernel_step = &__get_cpu_var(stepping_kernel_bp);
+
+		if (*kernel_step != ARM_KERNEL_STEP_NONE)
+			return 0;
+
+		if (kernel_active_single_step()) {
+			*kernel_step = ARM_KERNEL_STEP_SUSPEND;
+		} else {
+			*kernel_step = ARM_KERNEL_STEP_ACTIVE;
+			kernel_enable_single_step(regs);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Handle single-step exception.
+ */
+int reinstall_suspended_bps(struct pt_regs *regs)
+{
+	struct debug_info *debug_info = &current->thread.debug;
+	int handled_exception = 0, *kernel_step;
+
+	kernel_step = &__get_cpu_var(stepping_kernel_bp);
+
+	/*
+	 * Called from single-step exception handler.
+	 * Return 0 if execution can resume, 1 if a SIGTRAP should be
+	 * reported.
+	 */
+	if (user_mode(regs)) {
+		if (debug_info->bps_disabled) {
+			debug_info->bps_disabled = 0;
+			toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 1);
+			handled_exception = 1;
+		}
+
+		if (debug_info->wps_disabled) {
+			debug_info->wps_disabled = 0;
+			toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);
+			handled_exception = 1;
+		}
+
+		if (handled_exception) {
+			if (debug_info->suspended_step) {
+				debug_info->suspended_step = 0;
+				/* Allow exception handling to fall-through. */
+				handled_exception = 0;
+			} else {
+				user_disable_single_step(current);
+			}
+		}
+	} else if (*kernel_step != ARM_KERNEL_STEP_NONE) {
+		toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 1);
+		toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 1);
+
+		if (!debug_info->wps_disabled)
+			toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);
+
+		if (*kernel_step != ARM_KERNEL_STEP_SUSPEND) {
+			kernel_disable_single_step();
+			handled_exception = 1;
+		} else {
+			handled_exception = 0;
+		}
+
+		*kernel_step = ARM_KERNEL_STEP_NONE;
+	}
+
+	return !handled_exception;
+}
+
+/*
+ * Context-switcher for restoring suspended breakpoints.
+ */
+void hw_breakpoint_thread_switch(struct task_struct *next)
+{
+	/*
+	 *           current        next
+	 * disabled: 0              0     => The usual case, NOTIFY_DONE
+	 *           0              1     => Disable the registers
+	 *           1              0     => Enable the registers
+	 *           1              1     => NOTIFY_DONE. per-task bps will
+	 *                                   get taken care of by perf.
+	 */
+
+	struct debug_info *current_debug_info, *next_debug_info;
+
+	current_debug_info = &current->thread.debug;
+	next_debug_info = &next->thread.debug;
+
+	/* Update breakpoints. */
+	if (current_debug_info->bps_disabled != next_debug_info->bps_disabled)
+		toggle_bp_registers(AARCH64_DBG_REG_BCR,
+				    DBG_ACTIVE_EL0,
+				    !next_debug_info->bps_disabled);
+
+	/* Update watchpoints. */
+	if (current_debug_info->wps_disabled != next_debug_info->wps_disabled)
+		toggle_bp_registers(AARCH64_DBG_REG_WCR,
+				    DBG_ACTIVE_EL0,
+				    !next_debug_info->wps_disabled);
+}
+
+/*
+ * CPU initialisation.
+ */
+static void reset_ctrl_regs(void *unused)
+{
+	int i;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		write_wb_reg(AARCH64_DBG_REG_BCR, i, 0UL);
+		write_wb_reg(AARCH64_DBG_REG_BVR, i, 0UL);
+	}
+
+	for (i = 0; i < core_num_wrps; ++i) {
+		write_wb_reg(AARCH64_DBG_REG_WCR, i, 0UL);
+		write_wb_reg(AARCH64_DBG_REG_WVR, i, 0UL);
+	}
+}
+
+static int __cpuinit hw_breakpoint_reset_notify(struct notifier_block *self,
+						unsigned long action,
+						void *hcpu)
+{
+	int cpu = (long)hcpu;
+	if (action == CPU_ONLINE)
+		smp_call_function_single(cpu, reset_ctrl_regs, NULL, 1);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata hw_breakpoint_reset_nb = {
+	.notifier_call = hw_breakpoint_reset_notify,
+};
+
+/*
+ * One-time initialisation.
+ */
+static int __init arch_hw_breakpoint_init(void)
+{
+	core_num_brps = get_num_brps();
+	core_num_wrps = get_num_wrps();
+
+	pr_info("found %d breakpoint and %d watchpoint registers.\n",
+		core_num_brps, core_num_wrps);
+
+	/*
+	 * Reset the breakpoint resources. We assume that a halting
+	 * debugger will leave the world in a nice state for us.
+	 */
+	smp_call_function(reset_ctrl_regs, NULL, 1);
+	reset_ctrl_regs(NULL);
+
+	/* Register debug fault handlers. */
+	hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP,
+			      TRAP_HWBKPT, "hw-breakpoint handler");
+	hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP,
+			      TRAP_HWBKPT, "hw-watchpoint handler");
+
+	/* Register hotplug notifier. */
+	register_cpu_notifier(&hw_breakpoint_reset_nb);
+
+	return 0;
+}
+arch_initcall(arch_hw_breakpoint_init);
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+}
+
+/*
+ * Dummy function to register with die_notifier.
+ */
+int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+				    unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
diff --git a/arch/arm64/kernel/io.c b/arch/arm64/kernel/io.c
new file mode 100644
index 000000000000..7d37ead4d199
--- /dev/null
+++ b/arch/arm64/kernel/io.c
@@ -0,0 +1,64 @@
+/*
+ * Based on arch/arm/kernel/io.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+/*
+ * Copy data from IO memory space to "real" memory space.
+ */
+void __memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
+{
+	unsigned char *t = to;
+	while (count) {
+		count--;
+		*t = readb(from);
+		t++;
+		from++;
+	}
+}
+EXPORT_SYMBOL(__memcpy_fromio);
+
+/*
+ * Copy data from "real" memory space to IO memory space.
+ */
+void __memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
+{
+	const unsigned char *f = from;
+	while (count) {
+		count--;
+		writeb(*f, to);
+		f++;
+		to++;
+	}
+}
+EXPORT_SYMBOL(__memcpy_toio);
+
+/*
+ * "memset" on IO memory space.
+ */
+void __memset_io(volatile void __iomem *dst, int c, size_t count)
+{
+	while (count) {
+		count--;
+		writeb(c, dst);
+		dst++;
+	}
+}
+EXPORT_SYMBOL(__memset_io);
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
new file mode 100644
index 000000000000..0373c6609eaf
--- /dev/null
+++ b/arch/arm64/kernel/irq.c
@@ -0,0 +1,84 @@
+/*
+ * Based on arch/arm/kernel/irq.c
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
+ * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
+ * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/seq_file.h>
+#include <linux/ratelimit.h>
+
+unsigned long irq_err_count;
+
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+#ifdef CONFIG_SMP
+	show_ipi_list(p, prec);
+#endif
+	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
+	return 0;
+}
+
+/*
+ * handle_IRQ handles all hardware IRQ's.  Decoded IRQs should
+ * not come via this function.  Instead, they should provide their
+ * own 'handler'.  Used by platform code implementing C-based 1st
+ * level decoding.
+ */
+void handle_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (unlikely(irq >= nr_irqs)) {
+		pr_warn_ratelimited("Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
+		generic_handle_irq(irq);
+	}
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+/*
+ * Interrupt controllers supported by the kernel.
+ */
+static const struct of_device_id intctrl_of_match[] __initconst = {
+	/* IRQ controllers { .compatible, .data } info to go here */
+	{}
+};
+
+void __init init_IRQ(void)
+{
+	of_irq_init(intctrl_of_match);
+
+	if (!handle_arch_irq)
+		panic("No interrupt controller found.");
+}
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
new file mode 100644
index 000000000000..8b69ecb1d8bc
--- /dev/null
+++ b/arch/arm64/kernel/kuser32.S
@@ -0,0 +1,77 @@
+/*
+ * Low-level user helpers placed in the vectors page for AArch32.
+ * Based on the kuser helpers in arch/arm/kernel/entry-armv.S.
+ *
+ * Copyright (C) 2005-2011 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * AArch32 user helpers.
+ *
+ * Each segment is 32-byte aligned and will be moved to the top of the high
+ * vector page.  New segments (if ever needed) must be added in front of
+ * existing ones.  This mechanism should be used only for things that are
+ * really small and justified, and not be abused freely.
+ *
+ * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
+ */
+	.align	5
+	.globl	__kuser_helper_start
+__kuser_helper_start:
+
+__kuser_cmpxchg64:			// 0xffff0f60
+	.inst	0xe92d00f0		//	push		{r4, r5, r6, r7}
+	.inst	0xe1c040d0		//	ldrd		r4, r5, [r0]
+	.inst	0xe1c160d0		//	ldrd		r6, r7, [r1]
+	.inst	0xf57ff05f		//	dmb		sy
+	.inst	0xe1b20f9f		// 1:	ldrexd		r0, r1, [r2]
+	.inst	0xe0303004		//	eors		r3, r0, r4
+	.inst	0x00313005		//	eoreqs		r3, r1, r5
+	.inst	0x01a23f96		//	strexdeq	r3, r6, [r2]
+	.inst	0x03330001		//	teqeq		r3, #1
+	.inst	0x0afffff9		//	beq		1b
+	.inst	0xf57ff05f		//	dmb		sy
+	.inst	0xe2730000		//	rsbs		r0, r3, #0
+	.inst	0xe8bd00f0		//	pop		{r4, r5, r6, r7}
+	.inst	0xe12fff1e		//	bx		lr
+
+	.align	5
+__kuser_memory_barrier:			// 0xffff0fa0
+	.inst	0xf57ff05f		//	dmb		sy
+	.inst	0xe12fff1e		//	bx		lr
+
+	.align	5
+__kuser_cmpxchg:			// 0xffff0fc0
+	.inst	0xf57ff05f		//	dmb		sy
+	.inst	0xe1923f9f		// 1:	ldrex		r3, [r2]
+	.inst	0xe0533000		//	subs		r3, r3, r0
+	.inst	0x01823f91		//	strexeq	r3, r1, [r2]
+	.inst	0x03330001		//	teqeq		r3, #1
+	.inst	0x0afffffa		//	beq		1b
+	.inst	0xe2730000		//	rsbs		r0, r3, #0
+	.inst	0xeaffffef		//	b		<__kuser_memory_barrier>
+
+	.align	5
+__kuser_get_tls:			// 0xffff0fe0
+	.inst	0xee1d0f70		//	mrc		p15, 0, r0, c13, c0, 3
+	.inst	0xe12fff1e		//	bx		lr
+	.rep	5
+	.word	0
+	.endr
+
+__kuser_helper_version:			// 0xffff0ffc
+	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
+	.globl	__kuser_helper_end
+__kuser_helper_end:
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
new file mode 100644
index 000000000000..ca0e3d55da99
--- /dev/null
+++ b/arch/arm64/kernel/module.c
@@ -0,0 +1,456 @@
+/*
+ * AArch64 loadable module support.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/elf.h>
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/moduleloader.h>
+#include <linux/vmalloc.h>
+
+void *module_alloc(unsigned long size)
+{
+	return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
+				    GFP_KERNEL, PAGE_KERNEL_EXEC, -1,
+				    __builtin_return_address(0));
+}
+
+enum aarch64_reloc_op {
+	RELOC_OP_NONE,
+	RELOC_OP_ABS,
+	RELOC_OP_PREL,
+	RELOC_OP_PAGE,
+};
+
+static u64 do_reloc(enum aarch64_reloc_op reloc_op, void *place, u64 val)
+{
+	switch (reloc_op) {
+	case RELOC_OP_ABS:
+		return val;
+	case RELOC_OP_PREL:
+		return val - (u64)place;
+	case RELOC_OP_PAGE:
+		return (val & ~0xfff) - ((u64)place & ~0xfff);
+	case RELOC_OP_NONE:
+		return 0;
+	}
+
+	pr_err("do_reloc: unknown relocation operation %d\n", reloc_op);
+	return 0;
+}
+
+static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
+{
+	u64 imm_mask = (1 << len) - 1;
+	s64 sval = do_reloc(op, place, val);
+
+	switch (len) {
+	case 16:
+		*(s16 *)place = sval;
+		break;
+	case 32:
+		*(s32 *)place = sval;
+		break;
+	case 64:
+		*(s64 *)place = sval;
+		break;
+	default:
+		pr_err("Invalid length (%d) for data relocation\n", len);
+		return 0;
+	}
+
+	/*
+	 * Extract the upper value bits (including the sign bit) and
+	 * shift them to bit 0.
+	 */
+	sval = (s64)(sval & ~(imm_mask >> 1)) >> (len - 1);
+
+	/*
+	 * Overflow has occurred if the value is not representable in
+	 * len bits (i.e the bottom len bits are not sign-extended and
+	 * the top bits are not all zero).
+	 */
+	if ((u64)(sval + 1) > 2)
+		return -ERANGE;
+
+	return 0;
+}
+
+enum aarch64_imm_type {
+	INSN_IMM_MOVNZ,
+	INSN_IMM_MOVK,
+	INSN_IMM_ADR,
+	INSN_IMM_26,
+	INSN_IMM_19,
+	INSN_IMM_16,
+	INSN_IMM_14,
+	INSN_IMM_12,
+	INSN_IMM_9,
+};
+
+static u32 encode_insn_immediate(enum aarch64_imm_type type, u32 insn, u64 imm)
+{
+	u32 immlo, immhi, lomask, himask, mask;
+	int shift;
+
+	switch (type) {
+	case INSN_IMM_MOVNZ:
+		/*
+		 * For signed MOVW relocations, we have to manipulate the
+		 * instruction encoding depending on whether or not the
+		 * immediate is less than zero.
+		 */
+		insn &= ~(3 << 29);
+		if ((s64)imm >= 0) {
+			/* >=0: Set the instruction to MOVZ (opcode 10b). */
+			insn |= 2 << 29;
+		} else {
+			/*
+			 * <0: Set the instruction to MOVN (opcode 00b).
+			 *     Since we've masked the opcode already, we
+			 *     don't need to do anything other than
+			 *     inverting the new immediate field.
+			 */
+			imm = ~imm;
+		}
+	case INSN_IMM_MOVK:
+		mask = BIT(16) - 1;
+		shift = 5;
+		break;
+	case INSN_IMM_ADR:
+		lomask = 0x3;
+		himask = 0x7ffff;
+		immlo = imm & lomask;
+		imm >>= 2;
+		immhi = imm & himask;
+		imm = (immlo << 24) | (immhi);
+		mask = (lomask << 24) | (himask);
+		shift = 5;
+		break;
+	case INSN_IMM_26:
+		mask = BIT(26) - 1;
+		shift = 0;
+		break;
+	case INSN_IMM_19:
+		mask = BIT(19) - 1;
+		shift = 5;
+		break;
+	case INSN_IMM_16:
+		mask = BIT(16) - 1;
+		shift = 5;
+		break;
+	case INSN_IMM_14:
+		mask = BIT(14) - 1;
+		shift = 5;
+		break;
+	case INSN_IMM_12:
+		mask = BIT(12) - 1;
+		shift = 10;
+		break;
+	case INSN_IMM_9:
+		mask = BIT(9) - 1;
+		shift = 12;
+		break;
+	default:
+		pr_err("encode_insn_immediate: unknown immediate encoding %d\n",
+			type);
+		return 0;
+	}
+
+	/* Update the immediate field. */
+	insn &= ~(mask << shift);
+	insn |= (imm & mask) << shift;
+
+	return insn;
+}
+
+static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val,
+			   int lsb, enum aarch64_imm_type imm_type)
+{
+	u64 imm, limit = 0;
+	s64 sval;
+	u32 insn = *(u32 *)place;
+
+	sval = do_reloc(op, place, val);
+	sval >>= lsb;
+	imm = sval & 0xffff;
+
+	/* Update the instruction with the new encoding. */
+	*(u32 *)place = encode_insn_immediate(imm_type, insn, imm);
+
+	/* Shift out the immediate field. */
+	sval >>= 16;
+
+	/*
+	 * For unsigned immediates, the overflow check is straightforward.
+	 * For signed immediates, the sign bit is actually the bit past the
+	 * most significant bit of the field.
+	 * The INSN_IMM_16 immediate type is unsigned.
+	 */
+	if (imm_type != INSN_IMM_16) {
+		sval++;
+		limit++;
+	}
+
+	/* Check the upper bits depending on the sign of the immediate. */
+	if ((u64)sval > limit)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int reloc_insn_imm(enum aarch64_reloc_op op, void *place, u64 val,
+			  int lsb, int len, enum aarch64_imm_type imm_type)
+{
+	u64 imm, imm_mask;
+	s64 sval;
+	u32 insn = *(u32 *)place;
+
+	/* Calculate the relocation value. */
+	sval = do_reloc(op, place, val);
+	sval >>= lsb;
+
+	/* Extract the value bits and shift them to bit 0. */
+	imm_mask = (BIT(lsb + len) - 1) >> lsb;
+	imm = sval & imm_mask;
+
+	/* Update the instruction's immediate field. */
+	*(u32 *)place = encode_insn_immediate(imm_type, insn, imm);
+
+	/*
+	 * Extract the upper value bits (including the sign bit) and
+	 * shift them to bit 0.
+	 */
+	sval = (s64)(sval & ~(imm_mask >> 1)) >> (len - 1);
+
+	/*
+	 * Overflow has occurred if the upper bits are not all equal to
+	 * the sign bit of the value.
+	 */
+	if ((u64)(sval + 1) >= 2)
+		return -ERANGE;
+
+	return 0;
+}
+
+int apply_relocate_add(Elf64_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	unsigned int i;
+	int ovf;
+	bool overflow_check;
+	Elf64_Sym *sym;
+	void *loc;
+	u64 val;
+	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* loc corresponds to P in the AArch64 ELF document. */
+		loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+
+		/* sym is the ELF symbol we're referring to. */
+		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
+			+ ELF64_R_SYM(rel[i].r_info);
+
+		/* val corresponds to (S + A) in the AArch64 ELF document. */
+		val = sym->st_value + rel[i].r_addend;
+
+		/* Check for overflow by default. */
+		overflow_check = true;
+
+		/* Perform the static relocation. */
+		switch (ELF64_R_TYPE(rel[i].r_info)) {
+		/* Null relocations. */
+		case R_ARM_NONE:
+		case R_AARCH64_NONE:
+			ovf = 0;
+			break;
+
+		/* Data relocations. */
+		case R_AARCH64_ABS64:
+			overflow_check = false;
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 64);
+			break;
+		case R_AARCH64_ABS32:
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 32);
+			break;
+		case R_AARCH64_ABS16:
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 16);
+			break;
+		case R_AARCH64_PREL64:
+			overflow_check = false;
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 64);
+			break;
+		case R_AARCH64_PREL32:
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 32);
+			break;
+		case R_AARCH64_PREL16:
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 16);
+			break;
+
+		/* MOVW instruction relocations. */
+		case R_AARCH64_MOVW_UABS_G0_NC:
+			overflow_check = false;
+		case R_AARCH64_MOVW_UABS_G0:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
+					      INSN_IMM_16);
+			break;
+		case R_AARCH64_MOVW_UABS_G1_NC:
+			overflow_check = false;
+		case R_AARCH64_MOVW_UABS_G1:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
+					      INSN_IMM_16);
+			break;
+		case R_AARCH64_MOVW_UABS_G2_NC:
+			overflow_check = false;
+		case R_AARCH64_MOVW_UABS_G2:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
+					      INSN_IMM_16);
+			break;
+		case R_AARCH64_MOVW_UABS_G3:
+			/* We're using the top bits so we can't overflow. */
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 48,
+					      INSN_IMM_16);
+			break;
+		case R_AARCH64_MOVW_SABS_G0:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
+					      INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_SABS_G1:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
+					      INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_SABS_G2:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
+					      INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G0_NC:
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
+					      INSN_IMM_MOVK);
+			break;
+		case R_AARCH64_MOVW_PREL_G0:
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
+					      INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G1_NC:
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
+					      INSN_IMM_MOVK);
+			break;
+		case R_AARCH64_MOVW_PREL_G1:
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
+					      INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G2_NC:
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
+					      INSN_IMM_MOVK);
+			break;
+		case R_AARCH64_MOVW_PREL_G2:
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
+					      INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G3:
+			/* We're using the top bits so we can't overflow. */
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 48,
+					      INSN_IMM_MOVNZ);
+			break;
+
+		/* Immediate instruction relocations. */
+		case R_AARCH64_LD_PREL_LO19:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 19,
+					     INSN_IMM_19);
+			break;
+		case R_AARCH64_ADR_PREL_LO21:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 0, 21,
+					     INSN_IMM_ADR);
+			break;
+		case R_AARCH64_ADR_PREL_PG_HI21_NC:
+			overflow_check = false;
+		case R_AARCH64_ADR_PREL_PG_HI21:
+			ovf = reloc_insn_imm(RELOC_OP_PAGE, loc, val, 12, 21,
+					     INSN_IMM_ADR);
+			break;
+		case R_AARCH64_ADD_ABS_LO12_NC:
+		case R_AARCH64_LDST8_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 0, 12,
+					     INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST16_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 1, 11,
+					     INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST32_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 2, 10,
+					     INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST64_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 3, 9,
+					     INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST128_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 4, 8,
+					     INSN_IMM_12);
+			break;
+		case R_AARCH64_TSTBR14:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 14,
+					     INSN_IMM_14);
+			break;
+		case R_AARCH64_CONDBR19:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 19,
+					     INSN_IMM_19);
+			break;
+		case R_AARCH64_JUMP26:
+		case R_AARCH64_CALL26:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 26,
+					     INSN_IMM_26);
+			break;
+
+		default:
+			pr_err("module %s: unsupported RELA relocation: %llu\n",
+			       me->name, ELF64_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+
+		if (overflow_check && ovf == -ERANGE)
+			goto overflow;
+
+	}
+
+	return 0;
+
+overflow:
+	pr_err("module %s: overflow in relocation type %d val %Lx\n",
+	       me->name, (int)ELF64_R_TYPE(rel[i].r_info), val);
+	return -ENOEXEC;
+}
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
new file mode 100644
index 000000000000..ecbf2d81ec5c
--- /dev/null
+++ b/arch/arm64/kernel/perf_event.c
@@ -0,0 +1,1368 @@
+/*
+ * PMU support
+ *
+ * Copyright (C) 2012 ARM Limited
+ * Author: Will Deacon <will.deacon@arm.com>
+ *
+ * This code is based heavily on the ARMv7 perf event code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#define pr_fmt(fmt) "hw perfevents: " fmt
+
+#include <linux/bitmap.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+#include <asm/stacktrace.h>
+
+/*
+ * ARMv8 supports a maximum of 32 events.
+ * The cycle counter is included in this total.
+ */
+#define ARMPMU_MAX_HWEVENTS		32
+
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+/* Set at runtime when we know what CPU type we are. */
+static struct arm_pmu *cpu_pmu;
+
+int
+armpmu_get_max_events(void)
+{
+	int max_events = 0;
+
+	if (cpu_pmu != NULL)
+		max_events = cpu_pmu->num_events;
+
+	return max_events;
+}
+EXPORT_SYMBOL_GPL(armpmu_get_max_events);
+
+int perf_num_counters(void)
+{
+	return armpmu_get_max_events();
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
+#define HW_OP_UNSUPPORTED		0xFFFF
+
+#define C(_x) \
+	PERF_COUNT_HW_CACHE_##_x
+
+#define CACHE_OP_UNSUPPORTED		0xFFFF
+
+static int
+armpmu_map_cache_event(const unsigned (*cache_map)
+				      [PERF_COUNT_HW_CACHE_MAX]
+				      [PERF_COUNT_HW_CACHE_OP_MAX]
+				      [PERF_COUNT_HW_CACHE_RESULT_MAX],
+		       u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result, ret;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
+
+	if (ret == CACHE_OP_UNSUPPORTED)
+		return -ENOENT;
+
+	return ret;
+}
+
+static int
+armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
+{
+	int mapping = (*event_map)[config];
+	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
+}
+
+static int
+armpmu_map_raw_event(u32 raw_event_mask, u64 config)
+{
+	return (int)(config & raw_event_mask);
+}
+
+static int map_cpu_event(struct perf_event *event,
+			 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+			 const unsigned (*cache_map)
+					[PERF_COUNT_HW_CACHE_MAX]
+					[PERF_COUNT_HW_CACHE_OP_MAX]
+					[PERF_COUNT_HW_CACHE_RESULT_MAX],
+			 u32 raw_event_mask)
+{
+	u64 config = event->attr.config;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		return armpmu_map_event(event_map, config);
+	case PERF_TYPE_HW_CACHE:
+		return armpmu_map_cache_event(cache_map, config);
+	case PERF_TYPE_RAW:
+		return armpmu_map_raw_event(raw_event_mask, config);
+	}
+
+	return -ENOENT;
+}
+
+int
+armpmu_event_set_period(struct perf_event *event,
+			struct hw_perf_event *hwc,
+			int idx)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	s64 left = local64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (left > (s64)armpmu->max_period)
+		left = armpmu->max_period;
+
+	local64_set(&hwc->prev_count, (u64)-left);
+
+	armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+u64
+armpmu_event_update(struct perf_event *event,
+		    struct hw_perf_event *hwc,
+		    int idx)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	u64 delta, prev_raw_count, new_raw_count;
+
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = armpmu->read_counter(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
+
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static void
+armpmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* Don't read disabled counters! */
+	if (hwc->idx < 0)
+		return;
+
+	armpmu_event_update(event, hwc, hwc->idx);
+}
+
+static void
+armpmu_stop(struct perf_event *event, int flags)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+
+	/*
+	 * ARM pmu always has to update the counter, so ignore
+	 * PERF_EF_UPDATE, see comments in armpmu_start().
+	 */
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		armpmu->disable(hwc, hwc->idx);
+		barrier(); /* why? */
+		armpmu_event_update(event, hwc, hwc->idx);
+		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	}
+}
+
+static void
+armpmu_start(struct perf_event *event, int flags)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+
+	/*
+	 * ARM pmu always has to reprogram the period, so ignore
+	 * PERF_EF_RELOAD, see the comment below.
+	 */
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+	hwc->state = 0;
+	/*
+	 * Set the period again. Some counters can't be stopped, so when we
+	 * were stopped we simply disabled the IRQ source and the counter
+	 * may have been left counting. If we don't do this step then we may
+	 * get an interrupt too soon or *way* too late if the overflow has
+	 * happened since disabling.
+	 */
+	armpmu_event_set_period(event, hwc, hwc->idx);
+	armpmu->enable(hwc, hwc->idx);
+}
+
+static void
+armpmu_del(struct perf_event *event, int flags)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	WARN_ON(idx < 0);
+
+	armpmu_stop(event, PERF_EF_UPDATE);
+	hw_events->events[idx] = NULL;
+	clear_bit(idx, hw_events->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static int
+armpmu_add(struct perf_event *event, int flags)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+	int err = 0;
+
+	perf_pmu_disable(event->pmu);
+
+	/* If we don't have a space for the counter then finish early. */
+	idx = armpmu->get_event_idx(hw_events, hwc);
+	if (idx < 0) {
+		err = idx;
+		goto out;
+	}
+
+	/*
+	 * If there is an event in the counter we are going to use then make
+	 * sure it is disabled.
+	 */
+	event->hw.idx = idx;
+	armpmu->disable(hwc, idx);
+	hw_events->events[idx] = event;
+
+	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	if (flags & PERF_EF_START)
+		armpmu_start(event, PERF_EF_RELOAD);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+out:
+	perf_pmu_enable(event->pmu);
+	return err;
+}
+
+static int
+validate_event(struct pmu_hw_events *hw_events,
+	       struct perf_event *event)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event fake_event = event->hw;
+	struct pmu *leader_pmu = event->group_leader->pmu;
+
+	if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
+		return 1;
+
+	return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
+}
+
+static int
+validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct pmu_hw_events fake_pmu;
+	DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
+
+	/*
+	 * Initialise the fake PMU. We only need to populate the
+	 * used_mask for the purposes of validation.
+	 */
+	memset(fake_used_mask, 0, sizeof(fake_used_mask));
+	fake_pmu.used_mask = fake_used_mask;
+
+	if (!validate_event(&fake_pmu, leader))
+		return -EINVAL;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!validate_event(&fake_pmu, sibling))
+			return -EINVAL;
+	}
+
+	if (!validate_event(&fake_pmu, event))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void
+armpmu_release_hardware(struct arm_pmu *armpmu)
+{
+	int i, irq, irqs;
+	struct platform_device *pmu_device = armpmu->plat_device;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+	for (i = 0; i < irqs; ++i) {
+		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
+			continue;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq >= 0)
+			free_irq(irq, armpmu);
+	}
+}
+
+static int
+armpmu_reserve_hardware(struct arm_pmu *armpmu)
+{
+	int i, err, irq, irqs;
+	struct platform_device *pmu_device = armpmu->plat_device;
+
+	if (!pmu_device) {
+		pr_err("no PMU device registered\n");
+		return -ENODEV;
+	}
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+	if (irqs < 1) {
+		pr_err("no irqs for PMUs defined\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < irqs; ++i) {
+		err = 0;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq < 0)
+			continue;
+
+		/*
+		 * If we have a single PMU interrupt that we can't shift,
+		 * assume that we're running on a uniprocessor machine and
+		 * continue. Otherwise, continue without this interrupt.
+		 */
+		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+				    irq, i);
+			continue;
+		}
+
+		err = request_irq(irq, armpmu->handle_irq,
+				  IRQF_NOBALANCING,
+				  "arm-pmu", armpmu);
+		if (err) {
+			pr_err("unable to request IRQ%d for ARM PMU counters\n",
+				irq);
+			armpmu_release_hardware(armpmu);
+			return err;
+		}
+
+		cpumask_set_cpu(i, &armpmu->active_irqs);
+	}
+
+	return 0;
+}
+
+static void
+hw_perf_event_destroy(struct perf_event *event)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	atomic_t *active_events	 = &armpmu->active_events;
+	struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
+
+	if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
+		armpmu_release_hardware(armpmu);
+		mutex_unlock(pmu_reserve_mutex);
+	}
+}
+
+static int
+event_requires_mode_exclusion(struct perf_event_attr *attr)
+{
+	return attr->exclude_idle || attr->exclude_user ||
+	       attr->exclude_kernel || attr->exclude_hv;
+}
+
+static int
+__hw_perf_event_init(struct perf_event *event)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	int mapping, err;
+
+	mapping = armpmu->map_event(event);
+
+	if (mapping < 0) {
+		pr_debug("event %x:%llx not supported\n", event->attr.type,
+			 event->attr.config);
+		return mapping;
+	}
+
+	/*
+	 * We don't assign an index until we actually place the event onto
+	 * hardware. Use -1 to signify that we haven't decided where to put it
+	 * yet. For SMP systems, each core has it's own PMU so we can't do any
+	 * clever allocation or constraints checking at this point.
+	 */
+	hwc->idx		= -1;
+	hwc->config_base	= 0;
+	hwc->config		= 0;
+	hwc->event_base		= 0;
+
+	/*
+	 * Check whether we need to exclude the counter from certain modes.
+	 */
+	if ((!armpmu->set_event_filter ||
+	     armpmu->set_event_filter(hwc, &event->attr)) &&
+	     event_requires_mode_exclusion(&event->attr)) {
+		pr_debug("ARM performance counters do not support mode exclusion\n");
+		return -EPERM;
+	}
+
+	/*
+	 * Store the event encoding into the config_base field.
+	 */
+	hwc->config_base	    |= (unsigned long)mapping;
+
+	if (!hwc->sample_period) {
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
+		hwc->last_period    = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	err = 0;
+	if (event->group_leader != event) {
+		err = validate_group(event);
+		if (err)
+			return -EINVAL;
+	}
+
+	return err;
+}
+
+static int armpmu_event_init(struct perf_event *event)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+	int err = 0;
+	atomic_t *active_events = &armpmu->active_events;
+
+	if (armpmu->map_event(event) == -ENOENT)
+		return -ENOENT;
+
+	event->destroy = hw_perf_event_destroy;
+
+	if (!atomic_inc_not_zero(active_events)) {
+		mutex_lock(&armpmu->reserve_mutex);
+		if (atomic_read(active_events) == 0)
+			err = armpmu_reserve_hardware(armpmu);
+
+		if (!err)
+			atomic_inc(active_events);
+		mutex_unlock(&armpmu->reserve_mutex);
+	}
+
+	if (err)
+		return err;
+
+	err = __hw_perf_event_init(event);
+	if (err)
+		hw_perf_event_destroy(event);
+
+	return err;
+}
+
+static void armpmu_enable(struct pmu *pmu)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(pmu);
+	struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+	int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
+
+	if (enabled)
+		armpmu->start();
+}
+
+static void armpmu_disable(struct pmu *pmu)
+{
+	struct arm_pmu *armpmu = to_arm_pmu(pmu);
+	armpmu->stop();
+}
+
+static void __init armpmu_init(struct arm_pmu *armpmu)
+{
+	atomic_set(&armpmu->active_events, 0);
+	mutex_init(&armpmu->reserve_mutex);
+
+	armpmu->pmu = (struct pmu) {
+		.pmu_enable	= armpmu_enable,
+		.pmu_disable	= armpmu_disable,
+		.event_init	= armpmu_event_init,
+		.add		= armpmu_add,
+		.del		= armpmu_del,
+		.start		= armpmu_start,
+		.stop		= armpmu_stop,
+		.read		= armpmu_read,
+	};
+}
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+{
+	armpmu_init(armpmu);
+	return perf_pmu_register(&armpmu->pmu, name, type);
+}
+
+/*
+ * ARMv8 PMUv3 Performance Events handling code.
+ * Common event types.
+ */
+enum armv8_pmuv3_perf_types {
+	/* Required events. */
+	ARMV8_PMUV3_PERFCTR_PMNC_SW_INCR			= 0x00,
+	ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL			= 0x03,
+	ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS			= 0x04,
+	ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED			= 0x10,
+	ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES			= 0x11,
+	ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED			= 0x12,
+
+	/* At least one of the following is required. */
+	ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED			= 0x08,
+	ARMV8_PMUV3_PERFCTR_OP_SPEC				= 0x1B,
+
+	/* Common architectural events. */
+	ARMV8_PMUV3_PERFCTR_MEM_READ				= 0x06,
+	ARMV8_PMUV3_PERFCTR_MEM_WRITE				= 0x07,
+	ARMV8_PMUV3_PERFCTR_EXC_TAKEN				= 0x09,
+	ARMV8_PMUV3_PERFCTR_EXC_EXECUTED			= 0x0A,
+	ARMV8_PMUV3_PERFCTR_CID_WRITE				= 0x0B,
+	ARMV8_PMUV3_PERFCTR_PC_WRITE				= 0x0C,
+	ARMV8_PMUV3_PERFCTR_PC_IMM_BRANCH			= 0x0D,
+	ARMV8_PMUV3_PERFCTR_PC_PROC_RETURN			= 0x0E,
+	ARMV8_PMUV3_PERFCTR_MEM_UNALIGNED_ACCESS		= 0x0F,
+	ARMV8_PMUV3_PERFCTR_TTBR_WRITE				= 0x1C,
+
+	/* Common microarchitectural events. */
+	ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL			= 0x01,
+	ARMV8_PMUV3_PERFCTR_ITLB_REFILL				= 0x02,
+	ARMV8_PMUV3_PERFCTR_DTLB_REFILL				= 0x05,
+	ARMV8_PMUV3_PERFCTR_MEM_ACCESS				= 0x13,
+	ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS			= 0x14,
+	ARMV8_PMUV3_PERFCTR_L1_DCACHE_WB			= 0x15,
+	ARMV8_PMUV3_PERFCTR_L2_CACHE_ACCESS			= 0x16,
+	ARMV8_PMUV3_PERFCTR_L2_CACHE_REFILL			= 0x17,
+	ARMV8_PMUV3_PERFCTR_L2_CACHE_WB				= 0x18,
+	ARMV8_PMUV3_PERFCTR_BUS_ACCESS				= 0x19,
+	ARMV8_PMUV3_PERFCTR_MEM_ERROR				= 0x1A,
+	ARMV8_PMUV3_PERFCTR_BUS_CYCLES				= 0x1D,
+
+	/*
+	 * This isn't an architected event.
+	 * We detect this event number and use the cycle counter instead.
+	 */
+	ARMV8_PMUV3_PERFCTR_CPU_CYCLES				= 0xFF,
+};
+
+/* PMUv3 HW events mapping. */
+static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+						[PERF_COUNT_HW_CACHE_OP_MAX]
+						[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Perf Events' indices
+ */
+#define	ARMV8_IDX_CYCLE_COUNTER	0
+#define	ARMV8_IDX_COUNTER0	1
+#define	ARMV8_IDX_COUNTER_LAST	(ARMV8_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
+
+#define	ARMV8_MAX_COUNTERS	32
+#define	ARMV8_COUNTER_MASK	(ARMV8_MAX_COUNTERS - 1)
+
+/*
+ * ARMv8 low level PMU access
+ */
+
+/*
+ * Perf Event to low level counters mapping
+ */
+#define	ARMV8_IDX_TO_COUNTER(x)	\
+	(((x) - ARMV8_IDX_COUNTER0) & ARMV8_COUNTER_MASK)
+
+/*
+ * Per-CPU PMCR: config reg
+ */
+#define ARMV8_PMCR_E		(1 << 0) /* Enable all counters */
+#define ARMV8_PMCR_P		(1 << 1) /* Reset all counters */
+#define ARMV8_PMCR_C		(1 << 2) /* Cycle counter reset */
+#define ARMV8_PMCR_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV8_PMCR_X		(1 << 4) /* Export to ETM */
+#define ARMV8_PMCR_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
+#define	ARMV8_PMCR_N_SHIFT	11	 /* Number of counters supported */
+#define	ARMV8_PMCR_N_MASK	0x1f
+#define	ARMV8_PMCR_MASK		0x3f	 /* Mask for writable bits */
+
+/*
+ * PMOVSR: counters overflow flag status reg
+ */
+#define	ARMV8_OVSR_MASK		0xffffffff	/* Mask for writable bits */
+#define	ARMV8_OVERFLOWED_MASK	ARMV8_OVSR_MASK
+
+/*
+ * PMXEVTYPER: Event selection reg
+ */
+#define	ARMV8_EVTYPE_MASK	0xc00000ff	/* Mask for writable bits */
+#define	ARMV8_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
+
+/*
+ * Event filters for PMUv3
+ */
+#define	ARMV8_EXCLUDE_EL1	(1 << 31)
+#define	ARMV8_EXCLUDE_EL0	(1 << 30)
+#define	ARMV8_INCLUDE_EL2	(1 << 27)
+
+static inline u32 armv8pmu_pmcr_read(void)
+{
+	u32 val;
+	asm volatile("mrs %0, pmcr_el0" : "=r" (val));
+	return val;
+}
+
+static inline void armv8pmu_pmcr_write(u32 val)
+{
+	val &= ARMV8_PMCR_MASK;
+	isb();
+	asm volatile("msr pmcr_el0, %0" :: "r" (val));
+}
+
+static inline int armv8pmu_has_overflowed(u32 pmovsr)
+{
+	return pmovsr & ARMV8_OVERFLOWED_MASK;
+}
+
+static inline int armv8pmu_counter_valid(int idx)
+{
+	return idx >= ARMV8_IDX_CYCLE_COUNTER && idx <= ARMV8_IDX_COUNTER_LAST;
+}
+
+static inline int armv8pmu_counter_has_overflowed(u32 pmnc, int idx)
+{
+	int ret = 0;
+	u32 counter;
+
+	if (!armv8pmu_counter_valid(idx)) {
+		pr_err("CPU%u checking wrong counter %d overflow status\n",
+			smp_processor_id(), idx);
+	} else {
+		counter = ARMV8_IDX_TO_COUNTER(idx);
+		ret = pmnc & BIT(counter);
+	}
+
+	return ret;
+}
+
+static inline int armv8pmu_select_counter(int idx)
+{
+	u32 counter;
+
+	if (!armv8pmu_counter_valid(idx)) {
+		pr_err("CPU%u selecting wrong PMNC counter %d\n",
+			smp_processor_id(), idx);
+		return -EINVAL;
+	}
+
+	counter = ARMV8_IDX_TO_COUNTER(idx);
+	asm volatile("msr pmselr_el0, %0" :: "r" (counter));
+	isb();
+
+	return idx;
+}
+
+static inline u32 armv8pmu_read_counter(int idx)
+{
+	u32 value = 0;
+
+	if (!armv8pmu_counter_valid(idx))
+		pr_err("CPU%u reading wrong counter %d\n",
+			smp_processor_id(), idx);
+	else if (idx == ARMV8_IDX_CYCLE_COUNTER)
+		asm volatile("mrs %0, pmccntr_el0" : "=r" (value));
+	else if (armv8pmu_select_counter(idx) == idx)
+		asm volatile("mrs %0, pmxevcntr_el0" : "=r" (value));
+
+	return value;
+}
+
+static inline void armv8pmu_write_counter(int idx, u32 value)
+{
+	if (!armv8pmu_counter_valid(idx))
+		pr_err("CPU%u writing wrong counter %d\n",
+			smp_processor_id(), idx);
+	else if (idx == ARMV8_IDX_CYCLE_COUNTER)
+		asm volatile("msr pmccntr_el0, %0" :: "r" (value));
+	else if (armv8pmu_select_counter(idx) == idx)
+		asm volatile("msr pmxevcntr_el0, %0" :: "r" (value));
+}
+
+static inline void armv8pmu_write_evtype(int idx, u32 val)
+{
+	if (armv8pmu_select_counter(idx) == idx) {
+		val &= ARMV8_EVTYPE_MASK;
+		asm volatile("msr pmxevtyper_el0, %0" :: "r" (val));
+	}
+}
+
+static inline int armv8pmu_enable_counter(int idx)
+{
+	u32 counter;
+
+	if (!armv8pmu_counter_valid(idx)) {
+		pr_err("CPU%u enabling wrong PMNC counter %d\n",
+			smp_processor_id(), idx);
+		return -EINVAL;
+	}
+
+	counter = ARMV8_IDX_TO_COUNTER(idx);
+	asm volatile("msr pmcntenset_el0, %0" :: "r" (BIT(counter)));
+	return idx;
+}
+
+static inline int armv8pmu_disable_counter(int idx)
+{
+	u32 counter;
+
+	if (!armv8pmu_counter_valid(idx)) {
+		pr_err("CPU%u disabling wrong PMNC counter %d\n",
+			smp_processor_id(), idx);
+		return -EINVAL;
+	}
+
+	counter = ARMV8_IDX_TO_COUNTER(idx);
+	asm volatile("msr pmcntenclr_el0, %0" :: "r" (BIT(counter)));
+	return idx;
+}
+
+static inline int armv8pmu_enable_intens(int idx)
+{
+	u32 counter;
+
+	if (!armv8pmu_counter_valid(idx)) {
+		pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
+			smp_processor_id(), idx);
+		return -EINVAL;
+	}
+
+	counter = ARMV8_IDX_TO_COUNTER(idx);
+	asm volatile("msr pmintenset_el1, %0" :: "r" (BIT(counter)));
+	return idx;
+}
+
+static inline int armv8pmu_disable_intens(int idx)
+{
+	u32 counter;
+
+	if (!armv8pmu_counter_valid(idx)) {
+		pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
+			smp_processor_id(), idx);
+		return -EINVAL;
+	}
+
+	counter = ARMV8_IDX_TO_COUNTER(idx);
+	asm volatile("msr pmintenclr_el1, %0" :: "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("msr pmovsclr_el0, %0" :: "r" (BIT(counter)));
+	isb();
+	return idx;
+}
+
+static inline u32 armv8pmu_getreset_flags(void)
+{
+	u32 value;
+
+	/* Read */
+	asm volatile("mrs %0, pmovsclr_el0" : "=r" (value));
+
+	/* Write to clear flags */
+	value &= ARMV8_OVSR_MASK;
+	asm volatile("msr pmovsclr_el0, %0" :: "r" (value));
+
+	return value;
+}
+
+static void armv8pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+
+	/*
+	 * Enable counter and interrupt, and set the counter to count
+	 * the event that we're interested in.
+	 */
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv8pmu_disable_counter(idx);
+
+	/*
+	 * Set event (if destined for PMNx counters).
+	 */
+	armv8pmu_write_evtype(idx, hwc->config_base);
+
+	/*
+	 * Enable interrupt for this counter
+	 */
+	armv8pmu_enable_intens(idx);
+
+	/*
+	 * Enable counter
+	 */
+	armv8pmu_enable_counter(idx);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void armv8pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+
+	/*
+	 * Disable counter and interrupt
+	 */
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv8pmu_disable_counter(idx);
+
+	/*
+	 * Disable interrupt for this counter
+	 */
+	armv8pmu_disable_intens(idx);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static irqreturn_t armv8pmu_handle_irq(int irq_num, void *dev)
+{
+	u32 pmovsr;
+	struct perf_sample_data data;
+	struct pmu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * Get and reset the IRQ flags
+	 */
+	pmovsr = armv8pmu_getreset_flags();
+
+	/*
+	 * Did an overflow occur?
+	 */
+	if (!armv8pmu_has_overflowed(pmovsr))
+		return IRQ_NONE;
+
+	/*
+	 * Handle the counter(s) overflow(s)
+	 */
+	regs = get_irq_regs();
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv8pmu_counter_has_overflowed(pmovsr, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		perf_sample_data_init(&data, 0, hwc->last_period);
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, &data, regs))
+			cpu_pmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
+	 * will not work.
+	 */
+	irq_work_run();
+
+	return IRQ_HANDLED;
+}
+
+static void armv8pmu_start(void)
+{
+	unsigned long flags;
+	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	/* Enable all counters */
+	armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMCR_E);
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void armv8pmu_stop(void)
+{
+	unsigned long flags;
+	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	/* Disable all counters */
+	armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMCR_E);
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
+				  struct hw_perf_event *event)
+{
+	int idx;
+	unsigned long evtype = event->config_base & ARMV8_EVTYPE_EVENT;
+
+	/* Always place a cycle counter into the cycle counter. */
+	if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) {
+		if (test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV8_IDX_CYCLE_COUNTER;
+	}
+
+	/*
+	 * For anything other than a cycle counter, try and use
+	 * the events counters
+	 */
+	for (idx = ARMV8_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+		if (!test_and_set_bit(idx, cpuc->used_mask))
+			return idx;
+	}
+
+	/* The counters are all in use. */
+	return -EAGAIN;
+}
+
+/*
+ * Add an event filter to a given event. This will only work for PMUv2 PMUs.
+ */
+static int armv8pmu_set_event_filter(struct hw_perf_event *event,
+				     struct perf_event_attr *attr)
+{
+	unsigned long config_base = 0;
+
+	if (attr->exclude_idle)
+		return -EPERM;
+	if (attr->exclude_user)
+		config_base |= ARMV8_EXCLUDE_EL0;
+	if (attr->exclude_kernel)
+		config_base |= ARMV8_EXCLUDE_EL1;
+	if (!attr->exclude_hv)
+		config_base |= ARMV8_INCLUDE_EL2;
+
+	/*
+	 * Install the filter into config_base as this is used to
+	 * construct the event type.
+	 */
+	event->config_base = config_base;
+
+	return 0;
+}
+
+static void armv8pmu_reset(void *info)
+{
+	u32 idx, nb_cnt = cpu_pmu->num_events;
+
+	/* The counter and interrupt enable registers are unknown at reset. */
+	for (idx = ARMV8_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
+		armv8pmu_disable_event(NULL, idx);
+
+	/* Initialize & Reset PMNC: C and P bits. */
+	armv8pmu_pmcr_write(ARMV8_PMCR_P | ARMV8_PMCR_C);
+
+	/* Disable access from userspace. */
+	asm volatile("msr pmuserenr_el0, %0" :: "r" (0));
+}
+
+static int armv8_pmuv3_map_event(struct perf_event *event)
+{
+	return map_cpu_event(event, &armv8_pmuv3_perf_map,
+				&armv8_pmuv3_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv8pmu = {
+	.handle_irq		= armv8pmu_handle_irq,
+	.enable			= armv8pmu_enable_event,
+	.disable		= armv8pmu_disable_event,
+	.read_counter		= armv8pmu_read_counter,
+	.write_counter		= armv8pmu_write_counter,
+	.get_event_idx		= armv8pmu_get_event_idx,
+	.start			= armv8pmu_start,
+	.stop			= armv8pmu_stop,
+	.reset			= armv8pmu_reset,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+static u32 __init armv8pmu_read_num_pmnc_events(void)
+{
+	u32 nb_cnt;
+
+	/* Read the nb of CNTx counters supported from PMNC */
+	nb_cnt = (armv8pmu_pmcr_read() >> ARMV8_PMCR_N_SHIFT) & ARMV8_PMCR_N_MASK;
+
+	/* Add the CPU cycles counter and return */
+	return nb_cnt + 1;
+}
+
+static struct arm_pmu *__init armv8_pmuv3_pmu_init(void)
+{
+	armv8pmu.name			= "arm/armv8-pmuv3";
+	armv8pmu.map_event		= armv8_pmuv3_map_event;
+	armv8pmu.num_events		= armv8pmu_read_num_pmnc_events();
+	armv8pmu.set_event_filter	= armv8pmu_set_event_filter;
+	return &armv8pmu;
+}
+
+/*
+ * Ensure the PMU has sane values out of reset.
+ * This requires SMP to be available, so exists as a separate initcall.
+ */
+static int __init
+cpu_pmu_reset(void)
+{
+	if (cpu_pmu && cpu_pmu->reset)
+		return on_each_cpu(cpu_pmu->reset, NULL, 1);
+	return 0;
+}
+arch_initcall(cpu_pmu_reset);
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id armpmu_of_device_ids[] = {
+	{.compatible = "arm,armv8-pmuv3"},
+	{},
+};
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+	if (!cpu_pmu)
+		return -ENODEV;
+
+	cpu_pmu->plat_device = pdev;
+	return 0;
+}
+
+static struct platform_driver armpmu_driver = {
+	.driver		= {
+		.name	= "arm-pmu",
+		.of_match_table = armpmu_of_device_ids,
+	},
+	.probe		= armpmu_device_probe,
+};
+
+static int __init register_pmu_driver(void)
+{
+	return platform_driver_register(&armpmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+static struct pmu_hw_events *armpmu_get_cpu_events(void)
+{
+	return &__get_cpu_var(cpu_hw_events);
+}
+
+static void __init cpu_pmu_init(struct arm_pmu *armpmu)
+{
+	int cpu;
+	for_each_possible_cpu(cpu) {
+		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+		events->events = per_cpu(hw_events, cpu);
+		events->used_mask = per_cpu(used_mask, cpu);
+		raw_spin_lock_init(&events->pmu_lock);
+	}
+	armpmu->get_hw_events = armpmu_get_cpu_events;
+}
+
+static int __init init_hw_perf_events(void)
+{
+	u64 dfr = read_cpuid(ID_AA64DFR0_EL1);
+
+	switch ((dfr >> 8) & 0xf) {
+	case 0x1:	/* PMUv3 */
+		cpu_pmu = armv8_pmuv3_pmu_init();
+		break;
+	}
+
+	if (cpu_pmu) {
+		pr_info("enabled with %s PMU driver, %d counters available\n",
+			cpu_pmu->name, cpu_pmu->num_events);
+		cpu_pmu_init(cpu_pmu);
+		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
+	} else {
+		pr_info("no hardware support available\n");
+	}
+
+	return 0;
+}
+early_initcall(init_hw_perf_events);
+
+/*
+ * Callchain handling code.
+ */
+struct frame_tail {
+	struct frame_tail   __user *fp;
+	unsigned long	    lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
+	       struct perf_callchain_entry *entry)
+{
+	struct frame_tail buftail;
+	unsigned long err;
+
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+
+	pagefault_disable();
+	err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail));
+	pagefault_enable();
+
+	if (err)
+		return NULL;
+
+	perf_callchain_store(entry, buftail.lr);
+
+	/*
+	 * Frame pointers should strictly progress back up the stack
+	 * (towards higher addresses).
+	 */
+	if (tail >= buftail.fp)
+		return NULL;
+
+	return buftail.fp;
+}
+
+void perf_callchain_user(struct perf_callchain_entry *entry,
+			 struct pt_regs *regs)
+{
+	struct frame_tail __user *tail;
+
+	tail = (struct frame_tail __user *)regs->regs[29];
+
+	while (entry->nr < PERF_MAX_STACK_DEPTH &&
+	       tail && !((unsigned long)tail & 0xf))
+		tail = user_backtrace(tail, entry);
+}
+
+/*
+ * Gets called by walk_stackframe() for every stackframe. This will be called
+ * whist unwinding the stackframe and is like a subroutine return so we use
+ * the PC.
+ */
+static int callchain_trace(struct stackframe *frame, void *data)
+{
+	struct perf_callchain_entry *entry = data;
+	perf_callchain_store(entry, frame->pc);
+	return 0;
+}
+
+void perf_callchain_kernel(struct perf_callchain_entry *entry,
+			   struct pt_regs *regs)
+{
+	struct stackframe frame;
+
+	frame.fp = regs->regs[29];
+	frame.sp = regs->sp;
+	frame.pc = regs->pc;
+	walk_stackframe(&frame, callchain_trace, entry);
+}
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
new file mode 100644
index 000000000000..f22965ea1cfc
--- /dev/null
+++ b/arch/arm64/kernel/process.c
@@ -0,0 +1,408 @@
+/*
+ * Based on arch/arm/kernel/process.c
+ *
+ * Original Copyright (C) 1995  Linus Torvalds
+ * Copyright (C) 1996-2000 Russell King - Converted to ARM.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdarg.h>
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/user.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/elfcore.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/utsname.h>
+#include <linux/uaccess.h>
+#include <linux/random.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/personality.h>
+#include <linux/notifier.h>
+
+#include <asm/compat.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/stacktrace.h>
+#include <asm/fpsimd.h>
+
+static void setup_restart(void)
+{
+	/*
+	 * Tell the mm system that we are going to reboot -
+	 * we may need it to insert some 1:1 mappings so that
+	 * soft boot works.
+	 */
+	setup_mm_for_reboot();
+
+	/* Clean and invalidate caches */
+	flush_cache_all();
+
+	/* Turn D-cache off */
+	cpu_cache_off();
+
+	/* Push out any further dirty data, and ensure cache is empty */
+	flush_cache_all();
+}
+
+void soft_restart(unsigned long addr)
+{
+	setup_restart();
+	cpu_reset(addr);
+}
+
+/*
+ * Function pointers to optional machine specific functions
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL_GPL(pm_power_off);
+
+void (*pm_restart)(const char *cmd);
+EXPORT_SYMBOL_GPL(pm_restart);
+
+
+/*
+ * This is our default idle handler.
+ */
+static void default_idle(void)
+{
+	/*
+	 * This should do all the clock switching and wait for interrupt
+	 * tricks
+	 */
+	cpu_do_idle();
+	local_irq_enable();
+}
+
+void (*pm_idle)(void) = default_idle;
+EXPORT_SYMBOL_GPL(pm_idle);
+
+/*
+ * The idle thread, has rather strange semantics for calling pm_idle,
+ * but this is what x86 does and we need to do the same, so that
+ * things like cpuidle get called in the same way.  The only difference
+ * is that we always respect 'hlt_counter' to prevent low power idle.
+ */
+void cpu_idle(void)
+{
+	local_fiq_enable();
+
+	/* endless idle loop with no priority at all */
+	while (1) {
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
+		while (!need_resched()) {
+			/*
+			 * We need to disable interrupts here to ensure
+			 * we don't miss a wakeup call.
+			 */
+			local_irq_disable();
+			if (!need_resched()) {
+				stop_critical_timings();
+				pm_idle();
+				start_critical_timings();
+				/*
+				 * pm_idle functions should always return
+				 * with IRQs enabled.
+				 */
+				WARN_ON(irqs_disabled());
+			} else {
+				local_irq_enable();
+			}
+		}
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
+		schedule_preempt_disabled();
+	}
+}
+
+void machine_shutdown(void)
+{
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+}
+
+void machine_halt(void)
+{
+	machine_shutdown();
+	while (1);
+}
+
+void machine_power_off(void)
+{
+	machine_shutdown();
+	if (pm_power_off)
+		pm_power_off();
+}
+
+void machine_restart(char *cmd)
+{
+	machine_shutdown();
+
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
+
+	/* Now call the architecture specific reboot code. */
+	if (pm_restart)
+		pm_restart(cmd);
+
+	/*
+	 * Whoops - the architecture was unable to reboot.
+	 */
+	printk("Reboot failed -- System halted\n");
+	while (1);
+}
+
+void __show_regs(struct pt_regs *regs)
+{
+	int i;
+
+	printk("CPU: %d    %s  (%s %.*s)\n",
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
+		(int)strcspn(init_utsname()->version, " "),
+		init_utsname()->version);
+	print_symbol("PC is at %s\n", instruction_pointer(regs));
+	print_symbol("LR is at %s\n", regs->regs[30]);
+	printk("pc : [<%016llx>] lr : [<%016llx>] pstate: %08llx\n",
+	       regs->pc, regs->regs[30], regs->pstate);
+	printk("sp : %016llx\n", regs->sp);
+	for (i = 29; i >= 0; i--) {
+		printk("x%-2d: %016llx ", i, regs->regs[i]);
+		if (i % 2 == 0)
+			printk("\n");
+	}
+	printk("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+	printk("\n");
+	printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm);
+	__show_regs(regs);
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+}
+
+void flush_thread(void)
+{
+	fpsimd_flush_thread();
+	flush_ptrace_hw_breakpoint(current);
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+	fpsimd_save_state(&current->thread.fpsimd_state);
+	*dst = *src;
+	return 0;
+}
+
+asmlinkage void ret_from_fork(void) asm("ret_from_fork");
+
+int copy_thread(unsigned long clone_flags, unsigned long stack_start,
+		unsigned long stk_sz, struct task_struct *p,
+		struct pt_regs *regs)
+{
+	struct pt_regs *childregs = task_pt_regs(p);
+	unsigned long tls = p->thread.tp_value;
+
+	*childregs = *regs;
+	childregs->regs[0] = 0;
+
+	if (is_compat_thread(task_thread_info(p)))
+		childregs->compat_sp = stack_start;
+	else {
+		/*
+		 * Read the current TLS pointer from tpidr_el0 as it may be
+		 * out-of-sync with the saved value.
+		 */
+		asm("mrs %0, tpidr_el0" : "=r" (tls));
+		childregs->sp = stack_start;
+	}
+
+	memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
+	p->thread.cpu_context.sp = (unsigned long)childregs;
+	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+
+	/* If a TLS pointer was passed to clone, use that for the new thread. */
+	if (clone_flags & CLONE_SETTLS)
+		tls = regs->regs[3];
+	p->thread.tp_value = tls;
+
+	ptrace_hw_copy_thread(p);
+
+	return 0;
+}
+
+static void tls_thread_switch(struct task_struct *next)
+{
+	unsigned long tpidr, tpidrro;
+
+	if (!is_compat_task()) {
+		asm("mrs %0, tpidr_el0" : "=r" (tpidr));
+		current->thread.tp_value = tpidr;
+	}
+
+	if (is_compat_thread(task_thread_info(next))) {
+		tpidr = 0;
+		tpidrro = next->thread.tp_value;
+	} else {
+		tpidr = next->thread.tp_value;
+		tpidrro = 0;
+	}
+
+	asm(
+	"	msr	tpidr_el0, %0\n"
+	"	msr	tpidrro_el0, %1"
+	: : "r" (tpidr), "r" (tpidrro));
+}
+
+/*
+ * Thread switching.
+ */
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next)
+{
+	struct task_struct *last;
+
+	fpsimd_thread_switch(next);
+	tls_thread_switch(next);
+	hw_breakpoint_thread_switch(next);
+
+	/* the actual thread switch */
+	last = cpu_switch_to(prev, next);
+
+	return last;
+}
+
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+	return 1;
+}
+
+/*
+ * fill in the fpe structure for a core dump...
+ */
+int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
+{
+	return 0;
+}
+EXPORT_SYMBOL(dump_fpu);
+
+/*
+ * Shuffle the argument into the correct register before calling the
+ * thread function.  x1 is the thread argument, x2 is the pointer to
+ * the thread function, and x3 points to the exit function.
+ */
+extern void kernel_thread_helper(void);
+asm(	".section .text\n"
+"	.align\n"
+"	.type	kernel_thread_helper, #function\n"
+"kernel_thread_helper:\n"
+"	mov	x0, x1\n"
+"	mov	x30, x3\n"
+"	br	x2\n"
+"	.size	kernel_thread_helper, . - kernel_thread_helper\n"
+"	.previous");
+
+#define kernel_thread_exit	do_exit
+
+/*
+ * Create a kernel thread.
+ */
+pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+	regs.regs[1] = (unsigned long)arg;
+	regs.regs[2] = (unsigned long)fn;
+	regs.regs[3] = (unsigned long)kernel_thread_exit;
+	regs.pc = (unsigned long)kernel_thread_helper;
+	regs.pstate = PSR_MODE_EL1h;
+
+	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	struct stackframe frame;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	frame.fp = thread_saved_fp(p);
+	frame.sp = thread_saved_sp(p);
+	frame.pc = thread_saved_pc(p);
+	do {
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
+			return 0;
+		if (!in_sched_functions(frame.pc))
+			return frame.pc;
+	} while (count ++ < 16);
+	return 0;
+}
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+		sp -= get_random_int() & ~PAGE_MASK;
+	return sp & ~0xf;
+}
+
+static unsigned long randomize_base(unsigned long base)
+{
+	unsigned long range_end = base + (STACK_RND_MASK << PAGE_SHIFT) + 1;
+	return randomize_range(base, range_end, 0) ? : base;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	return randomize_base(mm->brk);
+}
+
+unsigned long randomize_et_dyn(unsigned long base)
+{
+	return randomize_base(base);
+}
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
new file mode 100644
index 000000000000..ac3550ecc7b5
--- /dev/null
+++ b/arch/arm64/kernel/ptrace.c
@@ -0,0 +1,1126 @@
+/*
+ * Based on arch/arm/kernel/ptrace.c
+ *
+ * By Ross Biro 1/23/92
+ * edited by Linus Torvalds
+ * ARM modifications Copyright (C) 2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/uaccess.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+
+#include <asm/compat.h>
+#include <asm/debug-monitors.h>
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/system_misc.h>
+
+/*
+ * TODO: does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+}
+
+/*
+ * Handle hitting a breakpoint.
+ */
+static int ptrace_break(struct pt_regs *regs)
+{
+	siginfo_t info = {
+		.si_signo = SIGTRAP,
+		.si_errno = 0,
+		.si_code  = TRAP_BRKPT,
+		.si_addr  = (void __user *)instruction_pointer(regs),
+	};
+
+	force_sig_info(SIGTRAP, &info, current);
+	return 0;
+}
+
+static int arm64_break_trap(unsigned long addr, unsigned int esr,
+			    struct pt_regs *regs)
+{
+	return ptrace_break(regs);
+}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+/*
+ * Handle hitting a HW-breakpoint.
+ */
+static void ptrace_hbptriggered(struct perf_event *bp,
+				struct perf_sample_data *data,
+				struct pt_regs *regs)
+{
+	struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
+	siginfo_t info = {
+		.si_signo	= SIGTRAP,
+		.si_errno	= 0,
+		.si_code	= TRAP_HWBKPT,
+		.si_addr	= (void __user *)(bkpt->trigger),
+	};
+
+#ifdef CONFIG_COMPAT
+	int i;
+
+	if (!is_compat_task())
+		goto send_sig;
+
+	for (i = 0; i < ARM_MAX_BRP; ++i) {
+		if (current->thread.debug.hbp_break[i] == bp) {
+			info.si_errno = (i << 1) + 1;
+			break;
+		}
+	}
+	for (i = ARM_MAX_BRP; i < ARM_MAX_HBP_SLOTS && !bp; ++i) {
+		if (current->thread.debug.hbp_watch[i] == bp) {
+			info.si_errno = -((i << 1) + 1);
+			break;
+		}
+	}
+
+send_sig:
+#endif
+	force_sig_info(SIGTRAP, &info, current);
+}
+
+/*
+ * Unregister breakpoints from this task and reset the pointers in
+ * the thread_struct.
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < ARM_MAX_BRP; i++) {
+		if (t->debug.hbp_break[i]) {
+			unregister_hw_breakpoint(t->debug.hbp_break[i]);
+			t->debug.hbp_break[i] = NULL;
+		}
+	}
+
+	for (i = 0; i < ARM_MAX_WRP; i++) {
+		if (t->debug.hbp_watch[i]) {
+			unregister_hw_breakpoint(t->debug.hbp_watch[i]);
+			t->debug.hbp_watch[i] = NULL;
+		}
+	}
+}
+
+void ptrace_hw_copy_thread(struct task_struct *tsk)
+{
+	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
+}
+
+static struct perf_event *ptrace_hbp_get_event(unsigned int note_type,
+					       struct task_struct *tsk,
+					       unsigned long idx)
+{
+	struct perf_event *bp = ERR_PTR(-EINVAL);
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if (idx < ARM_MAX_BRP)
+			bp = tsk->thread.debug.hbp_break[idx];
+		break;
+	case NT_ARM_HW_WATCH:
+		if (idx < ARM_MAX_WRP)
+			bp = tsk->thread.debug.hbp_watch[idx];
+		break;
+	}
+
+	return bp;
+}
+
+static int ptrace_hbp_set_event(unsigned int note_type,
+				struct task_struct *tsk,
+				unsigned long idx,
+				struct perf_event *bp)
+{
+	int err = -EINVAL;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if (idx < ARM_MAX_BRP) {
+			tsk->thread.debug.hbp_break[idx] = bp;
+			err = 0;
+		}
+		break;
+	case NT_ARM_HW_WATCH:
+		if (idx < ARM_MAX_WRP) {
+			tsk->thread.debug.hbp_watch[idx] = bp;
+			err = 0;
+		}
+		break;
+	}
+
+	return err;
+}
+
+static struct perf_event *ptrace_hbp_create(unsigned int note_type,
+					    struct task_struct *tsk,
+					    unsigned long idx)
+{
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+	int err, type;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		type = HW_BREAKPOINT_X;
+		break;
+	case NT_ARM_HW_WATCH:
+		type = HW_BREAKPOINT_RW;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	ptrace_breakpoint_init(&attr);
+
+	/*
+	 * Initialise fields to sane defaults
+	 * (i.e. values that will pass validation).
+	 */
+	attr.bp_addr	= 0;
+	attr.bp_len	= HW_BREAKPOINT_LEN_4;
+	attr.bp_type	= type;
+	attr.disabled	= 1;
+
+	bp = register_user_hw_breakpoint(&attr, ptrace_hbptriggered, NULL, tsk);
+	if (IS_ERR(bp))
+		return bp;
+
+	err = ptrace_hbp_set_event(note_type, tsk, idx, bp);
+	if (err)
+		return ERR_PTR(err);
+
+	return bp;
+}
+
+static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
+				     struct arch_hw_breakpoint_ctrl ctrl,
+				     struct perf_event_attr *attr)
+{
+	int err, len, type;
+
+	err = arch_bp_generic_fields(ctrl, &len, &type);
+	if (err)
+		return err;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if ((type & HW_BREAKPOINT_X) != type)
+			return -EINVAL;
+		break;
+	case NT_ARM_HW_WATCH:
+		if ((type & HW_BREAKPOINT_RW) != type)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	attr->bp_len	= len;
+	attr->bp_type	= type;
+	attr->disabled	= !ctrl.enabled;
+
+	return 0;
+}
+
+static int ptrace_hbp_get_resource_info(unsigned int note_type, u32 *info)
+{
+	u8 num;
+	u32 reg = 0;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		num = hw_breakpoint_slots(TYPE_INST);
+		break;
+	case NT_ARM_HW_WATCH:
+		num = hw_breakpoint_slots(TYPE_DATA);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg |= debug_monitors_arch();
+	reg <<= 8;
+	reg |= num;
+
+	*info = reg;
+	return 0;
+}
+
+static int ptrace_hbp_get_ctrl(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u32 *ctrl)
+{
+	struct perf_event *bp = ptrace_hbp_get_event(note_type, tsk, idx);
+
+	if (IS_ERR(bp))
+		return PTR_ERR(bp);
+
+	*ctrl = bp ? encode_ctrl_reg(counter_arch_bp(bp)->ctrl) : 0;
+	return 0;
+}
+
+static int ptrace_hbp_get_addr(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u64 *addr)
+{
+	struct perf_event *bp = ptrace_hbp_get_event(note_type, tsk, idx);
+
+	if (IS_ERR(bp))
+		return PTR_ERR(bp);
+
+	*addr = bp ? bp->attr.bp_addr : 0;
+	return 0;
+}
+
+static struct perf_event *ptrace_hbp_get_initialised_bp(unsigned int note_type,
+							struct task_struct *tsk,
+							unsigned long idx)
+{
+	struct perf_event *bp = ptrace_hbp_get_event(note_type, tsk, idx);
+
+	if (!bp)
+		bp = ptrace_hbp_create(note_type, tsk, idx);
+
+	return bp;
+}
+
+static int ptrace_hbp_set_ctrl(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u32 uctrl)
+{
+	int err;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	bp = ptrace_hbp_get_initialised_bp(note_type, tsk, idx);
+	if (IS_ERR(bp)) {
+		err = PTR_ERR(bp);
+		return err;
+	}
+
+	attr = bp->attr;
+	decode_ctrl_reg(uctrl, &ctrl);
+	err = ptrace_hbp_fill_attr_ctrl(note_type, ctrl, &attr);
+	if (err)
+		return err;
+
+	return modify_user_hw_breakpoint(bp, &attr);
+}
+
+static int ptrace_hbp_set_addr(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u64 addr)
+{
+	int err;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+
+	bp = ptrace_hbp_get_initialised_bp(note_type, tsk, idx);
+	if (IS_ERR(bp)) {
+		err = PTR_ERR(bp);
+		return err;
+	}
+
+	attr = bp->attr;
+	attr.bp_addr = addr;
+	err = modify_user_hw_breakpoint(bp, &attr);
+	return err;
+}
+
+#define PTRACE_HBP_ADDR_SZ	sizeof(u64)
+#define PTRACE_HBP_CTRL_SZ	sizeof(u32)
+#define PTRACE_HBP_REG_OFF	sizeof(u32)
+
+static int hw_break_get(struct task_struct *target,
+			const struct user_regset *regset,
+			unsigned int pos, unsigned int count,
+			void *kbuf, void __user *ubuf)
+{
+	unsigned int note_type = regset->core_note_type;
+	int ret, idx = 0, offset = PTRACE_HBP_REG_OFF, limit;
+	u32 info, ctrl;
+	u64 addr;
+
+	/* Resource info */
+	ret = ptrace_hbp_get_resource_info(note_type, &info);
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &info, 0, 4);
+	if (ret)
+		return ret;
+
+	/* (address, ctrl) registers */
+	limit = regset->n * regset->size;
+	while (count && offset < limit) {
+		ret = ptrace_hbp_get_addr(note_type, target, idx, &addr);
+		if (ret)
+			return ret;
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &addr,
+					  offset, offset + PTRACE_HBP_ADDR_SZ);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_ADDR_SZ;
+
+		ret = ptrace_hbp_get_ctrl(note_type, target, idx, &ctrl);
+		if (ret)
+			return ret;
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &ctrl,
+					  offset, offset + PTRACE_HBP_CTRL_SZ);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_CTRL_SZ;
+		idx++;
+	}
+
+	return 0;
+}
+
+static int hw_break_set(struct task_struct *target,
+			const struct user_regset *regset,
+			unsigned int pos, unsigned int count,
+			const void *kbuf, const void __user *ubuf)
+{
+	unsigned int note_type = regset->core_note_type;
+	int ret, idx = 0, offset = PTRACE_HBP_REG_OFF, limit;
+	u32 ctrl;
+	u64 addr;
+
+	/* Resource info */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, 4);
+	if (ret)
+		return ret;
+
+	/* (address, ctrl) registers */
+	limit = regset->n * regset->size;
+	while (count && offset < limit) {
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &addr,
+					 offset, offset + PTRACE_HBP_ADDR_SZ);
+		if (ret)
+			return ret;
+		ret = ptrace_hbp_set_addr(note_type, target, idx, addr);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_ADDR_SZ;
+
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl,
+					 offset, offset + PTRACE_HBP_CTRL_SZ);
+		if (ret)
+			return ret;
+		ret = ptrace_hbp_set_ctrl(note_type, target, idx, ctrl);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_CTRL_SZ;
+		idx++;
+	}
+
+	return 0;
+}
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+
+static int gpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	struct user_pt_regs *uregs = &task_pt_regs(target)->user_regs;
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0, -1);
+}
+
+static int gpr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct user_pt_regs newregs;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newregs, 0, -1);
+	if (ret)
+		return ret;
+
+	if (!valid_user_regs(&newregs))
+		return -EINVAL;
+
+	task_pt_regs(target)->user_regs = newregs;
+	return 0;
+}
+
+/*
+ * TODO: update fp accessors for lazy context switching (sync/flush hwstate)
+ */
+static int fpr_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	struct user_fpsimd_state *uregs;
+	uregs = &target->thread.fpsimd_state.user_fpsimd;
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0, -1);
+}
+
+static int fpr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct user_fpsimd_state newstate;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate, 0, -1);
+	if (ret)
+		return ret;
+
+	target->thread.fpsimd_state.user_fpsimd = newstate;
+	return ret;
+}
+
+static int tls_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	unsigned long *tls = &target->thread.tp_value;
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, tls, 0, -1);
+}
+
+static int tls_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	unsigned long tls;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
+	if (ret)
+		return ret;
+
+	target->thread.tp_value = tls;
+	return ret;
+}
+
+enum aarch64_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+	REGSET_TLS,
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	REGSET_HW_BREAK,
+	REGSET_HW_WATCH,
+#endif
+};
+
+static const struct user_regset aarch64_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = sizeof(struct user_pt_regs) / sizeof(u64),
+		.size = sizeof(u64),
+		.align = sizeof(u64),
+		.get = gpr_get,
+		.set = gpr_set
+	},
+	[REGSET_FPR] = {
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(struct user_fpsimd_state) / sizeof(u32),
+		/*
+		 * We pretend we have 32-bit registers because the fpsr and
+		 * fpcr are 32-bits wide.
+		 */
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = fpr_get,
+		.set = fpr_set
+	},
+	[REGSET_TLS] = {
+		.core_note_type = NT_ARM_TLS,
+		.n = 1,
+		.size = sizeof(void *),
+		.align = sizeof(void *),
+		.get = tls_get,
+		.set = tls_set,
+	},
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	[REGSET_HW_BREAK] = {
+		.core_note_type = NT_ARM_HW_BREAK,
+		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = hw_break_get,
+		.set = hw_break_set,
+	},
+	[REGSET_HW_WATCH] = {
+		.core_note_type = NT_ARM_HW_WATCH,
+		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = hw_break_get,
+		.set = hw_break_set,
+	},
+#endif
+};
+
+static const struct user_regset_view user_aarch64_view = {
+	.name = "aarch64", .e_machine = EM_AARCH64,
+	.regsets = aarch64_regsets, .n = ARRAY_SIZE(aarch64_regsets)
+};
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+enum compat_regset {
+	REGSET_COMPAT_GPR,
+	REGSET_COMPAT_VFP,
+};
+
+static int compat_gpr_get(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  void *kbuf, void __user *ubuf)
+{
+	int ret = 0;
+	unsigned int i, start, num_regs;
+
+	/* Calculate the number of AArch32 registers contained in count */
+	num_regs = count / regset->size;
+
+	/* Convert pos into an register number */
+	start = pos / regset->size;
+
+	if (start + num_regs > regset->n)
+		return -EIO;
+
+	for (i = 0; i < num_regs; ++i) {
+		unsigned int idx = start + i;
+		void *reg;
+
+		switch (idx) {
+		case 15:
+			reg = (void *)&task_pt_regs(target)->pc;
+			break;
+		case 16:
+			reg = (void *)&task_pt_regs(target)->pstate;
+			break;
+		case 17:
+			reg = (void *)&task_pt_regs(target)->orig_x0;
+			break;
+		default:
+			reg = (void *)&task_pt_regs(target)->regs[idx];
+		}
+
+		ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t));
+
+		if (ret)
+			break;
+		else
+			ubuf += sizeof(compat_ulong_t);
+	}
+
+	return ret;
+}
+
+static int compat_gpr_set(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs newregs;
+	int ret = 0;
+	unsigned int i, start, num_regs;
+
+	/* Calculate the number of AArch32 registers contained in count */
+	num_regs = count / regset->size;
+
+	/* Convert pos into an register number */
+	start = pos / regset->size;
+
+	if (start + num_regs > regset->n)
+		return -EIO;
+
+	newregs = *task_pt_regs(target);
+
+	for (i = 0; i < num_regs; ++i) {
+		unsigned int idx = start + i;
+		void *reg;
+
+		switch (idx) {
+		case 15:
+			reg = (void *)&newregs.pc;
+			break;
+		case 16:
+			reg = (void *)&newregs.pstate;
+			break;
+		case 17:
+			reg = (void *)&newregs.orig_x0;
+			break;
+		default:
+			reg = (void *)&newregs.regs[idx];
+		}
+
+		ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t));
+
+		if (ret)
+			goto out;
+		else
+			ubuf += sizeof(compat_ulong_t);
+	}
+
+	if (valid_user_regs(&newregs.user_regs))
+		*task_pt_regs(target) = newregs;
+	else
+		ret = -EINVAL;
+
+out:
+	return ret;
+}
+
+static int compat_vfp_get(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  void *kbuf, void __user *ubuf)
+{
+	struct user_fpsimd_state *uregs;
+	compat_ulong_t fpscr;
+	int ret;
+
+	uregs = &target->thread.fpsimd_state.user_fpsimd;
+
+	/*
+	 * The VFP registers are packed into the fpsimd_state, so they all sit
+	 * nicely together for us. We just need to create the fpscr separately.
+	 */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				  VFP_STATE_SIZE - sizeof(compat_ulong_t));
+
+	if (count && !ret) {
+		fpscr = (uregs->fpsr & VFP_FPSCR_STAT_MASK) |
+			(uregs->fpcr & VFP_FPSCR_CTRL_MASK);
+		ret = put_user(fpscr, (compat_ulong_t *)ubuf);
+	}
+
+	return ret;
+}
+
+static int compat_vfp_set(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf)
+{
+	struct user_fpsimd_state *uregs;
+	compat_ulong_t fpscr;
+	int ret;
+
+	if (pos + count > VFP_STATE_SIZE)
+		return -EIO;
+
+	uregs = &target->thread.fpsimd_state.user_fpsimd;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				 VFP_STATE_SIZE - sizeof(compat_ulong_t));
+
+	if (count && !ret) {
+		ret = get_user(fpscr, (compat_ulong_t *)ubuf);
+		uregs->fpsr = fpscr & VFP_FPSCR_STAT_MASK;
+		uregs->fpcr = fpscr & VFP_FPSCR_CTRL_MASK;
+	}
+
+	return ret;
+}
+
+static const struct user_regset aarch32_regsets[] = {
+	[REGSET_COMPAT_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = COMPAT_ELF_NGREG,
+		.size = sizeof(compat_elf_greg_t),
+		.align = sizeof(compat_elf_greg_t),
+		.get = compat_gpr_get,
+		.set = compat_gpr_set
+	},
+	[REGSET_COMPAT_VFP] = {
+		.core_note_type = NT_ARM_VFP,
+		.n = VFP_STATE_SIZE / sizeof(compat_ulong_t),
+		.size = sizeof(compat_ulong_t),
+		.align = sizeof(compat_ulong_t),
+		.get = compat_vfp_get,
+		.set = compat_vfp_set
+	},
+};
+
+static const struct user_regset_view user_aarch32_view = {
+	.name = "aarch32", .e_machine = EM_ARM,
+	.regsets = aarch32_regsets, .n = ARRAY_SIZE(aarch32_regsets)
+};
+
+int aarch32_break_trap(struct pt_regs *regs)
+{
+	unsigned int instr;
+	bool bp = false;
+	void __user *pc = (void __user *)instruction_pointer(regs);
+
+	if (compat_thumb_mode(regs)) {
+		/* get 16-bit Thumb instruction */
+		get_user(instr, (u16 __user *)pc);
+		if (instr == AARCH32_BREAK_THUMB2_LO) {
+			/* get second half of 32-bit Thumb-2 instruction */
+			get_user(instr, (u16 __user *)(pc + 2));
+			bp = instr == AARCH32_BREAK_THUMB2_HI;
+		} else {
+			bp = instr == AARCH32_BREAK_THUMB;
+		}
+	} else {
+		/* 32-bit ARM instruction */
+		get_user(instr, (u32 __user *)pc);
+		bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM;
+	}
+
+	if (bp)
+		return ptrace_break(regs);
+	return 1;
+}
+
+static int compat_ptrace_read_user(struct task_struct *tsk, compat_ulong_t off,
+				   compat_ulong_t __user *ret)
+{
+	compat_ulong_t tmp;
+
+	if (off & 3)
+		return -EIO;
+
+	if (off == PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(compat_elf_gregset_t))
+		return copy_regset_to_user(tsk, &user_aarch32_view,
+					   REGSET_COMPAT_GPR, off,
+					   sizeof(compat_ulong_t), ret);
+	else if (off >= COMPAT_USER_SZ)
+		return -EIO;
+	else
+		tmp = 0;
+
+	return put_user(tmp, ret);
+}
+
+static int compat_ptrace_write_user(struct task_struct *tsk, compat_ulong_t off,
+				    compat_ulong_t val)
+{
+	int ret;
+
+	if (off & 3 || off >= COMPAT_USER_SZ)
+		return -EIO;
+
+	if (off >= sizeof(compat_elf_gregset_t))
+		return 0;
+
+	ret = copy_regset_from_user(tsk, &user_aarch32_view,
+				    REGSET_COMPAT_GPR, off,
+				    sizeof(compat_ulong_t),
+				    &val);
+	return ret;
+}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+/*
+ * Convert a virtual register number into an index for a thread_info
+ * breakpoint array. Breakpoints are identified using positive numbers
+ * whilst watchpoints are negative. The registers are laid out as pairs
+ * of (address, control), each pair mapping to a unique hw_breakpoint struct.
+ * Register 0 is reserved for describing resource information.
+ */
+static int compat_ptrace_hbp_num_to_idx(compat_long_t num)
+{
+	return (abs(num) - 1) >> 1;
+}
+
+static int compat_ptrace_hbp_get_resource_info(u32 *kdata)
+{
+	u8 num_brps, num_wrps, debug_arch, wp_len;
+	u32 reg = 0;
+
+	num_brps	= hw_breakpoint_slots(TYPE_INST);
+	num_wrps	= hw_breakpoint_slots(TYPE_DATA);
+
+	debug_arch	= debug_monitors_arch();
+	wp_len		= 8;
+	reg		|= debug_arch;
+	reg		<<= 8;
+	reg		|= wp_len;
+	reg		<<= 8;
+	reg		|= num_wrps;
+	reg		<<= 8;
+	reg		|= num_brps;
+
+	*kdata = reg;
+	return 0;
+}
+
+static int compat_ptrace_hbp_get(unsigned int note_type,
+				 struct task_struct *tsk,
+				 compat_long_t num,
+				 u32 *kdata)
+{
+	u64 addr = 0;
+	u32 ctrl = 0;
+
+	int err, idx = compat_ptrace_hbp_num_to_idx(num);;
+
+	if (num & 1) {
+		err = ptrace_hbp_get_addr(note_type, tsk, idx, &addr);
+		*kdata = (u32)addr;
+	} else {
+		err = ptrace_hbp_get_ctrl(note_type, tsk, idx, &ctrl);
+		*kdata = ctrl;
+	}
+
+	return err;
+}
+
+static int compat_ptrace_hbp_set(unsigned int note_type,
+				 struct task_struct *tsk,
+				 compat_long_t num,
+				 u32 *kdata)
+{
+	u64 addr;
+	u32 ctrl;
+
+	int err, idx = compat_ptrace_hbp_num_to_idx(num);
+
+	if (num & 1) {
+		addr = *kdata;
+		err = ptrace_hbp_set_addr(note_type, tsk, idx, addr);
+	} else {
+		ctrl = *kdata;
+		err = ptrace_hbp_set_ctrl(note_type, tsk, idx, ctrl);
+	}
+
+	return err;
+}
+
+static int compat_ptrace_gethbpregs(struct task_struct *tsk, compat_long_t num,
+				    compat_ulong_t __user *data)
+{
+	int ret;
+	u32 kdata;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	/* Watchpoint */
+	if (num < 0) {
+		ret = compat_ptrace_hbp_get(NT_ARM_HW_WATCH, tsk, num, &kdata);
+	/* Resource info */
+	} else if (num == 0) {
+		ret = compat_ptrace_hbp_get_resource_info(&kdata);
+	/* Breakpoint */
+	} else {
+		ret = compat_ptrace_hbp_get(NT_ARM_HW_BREAK, tsk, num, &kdata);
+	}
+	set_fs(old_fs);
+
+	if (!ret)
+		ret = put_user(kdata, data);
+
+	return ret;
+}
+
+static int compat_ptrace_sethbpregs(struct task_struct *tsk, compat_long_t num,
+				    compat_ulong_t __user *data)
+{
+	int ret;
+	u32 kdata = 0;
+	mm_segment_t old_fs = get_fs();
+
+	if (num == 0)
+		return 0;
+
+	ret = get_user(kdata, data);
+	if (ret)
+		return ret;
+
+	set_fs(KERNEL_DS);
+	if (num < 0)
+		ret = compat_ptrace_hbp_set(NT_ARM_HW_WATCH, tsk, num, &kdata);
+	else
+		ret = compat_ptrace_hbp_set(NT_ARM_HW_BREAK, tsk, num, &kdata);
+	set_fs(old_fs);
+
+	return ret;
+}
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
+{
+	unsigned long addr = caddr;
+	unsigned long data = cdata;
+	void __user *datap = compat_ptr(data);
+	int ret;
+
+	switch (request) {
+		case PTRACE_PEEKUSR:
+			ret = compat_ptrace_read_user(child, addr, datap);
+			break;
+
+		case PTRACE_POKEUSR:
+			ret = compat_ptrace_write_user(child, addr, data);
+			break;
+
+		case COMPAT_PTRACE_GETREGS:
+			ret = copy_regset_to_user(child,
+						  &user_aarch32_view,
+						  REGSET_COMPAT_GPR,
+						  0, sizeof(compat_elf_gregset_t),
+						  datap);
+			break;
+
+		case COMPAT_PTRACE_SETREGS:
+			ret = copy_regset_from_user(child,
+						    &user_aarch32_view,
+						    REGSET_COMPAT_GPR,
+						    0, sizeof(compat_elf_gregset_t),
+						    datap);
+			break;
+
+		case COMPAT_PTRACE_GET_THREAD_AREA:
+			ret = put_user((compat_ulong_t)child->thread.tp_value,
+				       (compat_ulong_t __user *)datap);
+			break;
+
+		case COMPAT_PTRACE_SET_SYSCALL:
+			task_pt_regs(child)->syscallno = data;
+			ret = 0;
+			break;
+
+		case COMPAT_PTRACE_GETVFPREGS:
+			ret = copy_regset_to_user(child,
+						  &user_aarch32_view,
+						  REGSET_COMPAT_VFP,
+						  0, VFP_STATE_SIZE,
+						  datap);
+			break;
+
+		case COMPAT_PTRACE_SETVFPREGS:
+			ret = copy_regset_from_user(child,
+						    &user_aarch32_view,
+						    REGSET_COMPAT_VFP,
+						    0, VFP_STATE_SIZE,
+						    datap);
+			break;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+		case COMPAT_PTRACE_GETHBPREGS:
+			ret = compat_ptrace_gethbpregs(child, addr, datap);
+			break;
+
+		case COMPAT_PTRACE_SETHBPREGS:
+			ret = compat_ptrace_sethbpregs(child, addr, datap);
+			break;
+#endif
+
+		default:
+			ret = compat_ptrace_request(child, request, addr,
+						    data);
+			break;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_COMPAT */
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+#ifdef CONFIG_COMPAT
+	if (is_compat_thread(task_thread_info(task)))
+		return &user_aarch32_view;
+#endif
+	return &user_aarch64_view;
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	return ptrace_request(child, request, addr, data);
+}
+
+
+static int __init ptrace_break_init(void)
+{
+	hook_debug_fault_code(DBG_ESR_EVT_BRK, arm64_break_trap, SIGTRAP,
+			      TRAP_BRKPT, "ptrace BRK handler");
+	return 0;
+}
+core_initcall(ptrace_break_init);
+
+
+asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
+{
+	unsigned long saved_reg;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return regs->syscallno;
+
+	if (is_compat_task()) {
+		/* AArch32 uses ip (r12) for scratch */
+		saved_reg = regs->regs[12];
+		regs->regs[12] = dir;
+	} else {
+		/*
+		 * Save X7. X7 is used to denote syscall entry/exit:
+		 *   X7 = 0 -> entry, = 1 -> exit
+		 */
+		saved_reg = regs->regs[7];
+		regs->regs[7] = dir;
+	}
+
+	if (dir)
+		tracehook_report_syscall_exit(regs, 0);
+	else if (tracehook_report_syscall_entry(regs))
+		regs->syscallno = ~0UL;
+
+	if (is_compat_task())
+		regs->regs[12] = saved_reg;
+	else
+		regs->regs[7] = saved_reg;
+
+	return regs->syscallno;
+}
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
new file mode 100644
index 000000000000..48ffb9fb3fe3
--- /dev/null
+++ b/arch/arm64/kernel/setup.c
@@ -0,0 +1,347 @@
+/*
+ * Based on arch/arm/kernel/setup.c
+ *
+ * Copyright (C) 1995-2001 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/utsname.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/screen_info.h>
+#include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+
+#include <asm/cputype.h>
+#include <asm/elf.h>
+#include <asm/cputable.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+#include <asm/memblock.h>
+
+unsigned int processor_id;
+EXPORT_SYMBOL(processor_id);
+
+unsigned int elf_hwcap __read_mostly;
+EXPORT_SYMBOL_GPL(elf_hwcap);
+
+static const char *cpu_name;
+static const char *machine_name;
+phys_addr_t __fdt_pointer __initdata;
+
+/*
+ * Standard memory resources
+ */
+static struct resource mem_res[] = {
+	{
+		.name = "Kernel code",
+		.start = 0,
+		.end = 0,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.name = "Kernel data",
+		.start = 0,
+		.end = 0,
+		.flags = IORESOURCE_MEM
+	}
+};
+
+#define kernel_code mem_res[0]
+#define kernel_data mem_res[1]
+
+void __init early_print(const char *str, ...)
+{
+	char buf[256];
+	va_list ap;
+
+	va_start(ap, str);
+	vsnprintf(buf, sizeof(buf), str, ap);
+	va_end(ap);
+
+	printk("%s", buf);
+}
+
+static void __init setup_processor(void)
+{
+	struct cpu_info *cpu_info;
+
+	/*
+	 * locate processor in the list of supported processor
+	 * types.  The linker builds this table for us from the
+	 * entries in arch/arm/mm/proc.S
+	 */
+	cpu_info = lookup_processor_type(read_cpuid_id());
+	if (!cpu_info) {
+		printk("CPU configuration botched (ID %08x), unable to continue.\n",
+		       read_cpuid_id());
+		while (1);
+	}
+
+	cpu_name = cpu_info->cpu_name;
+
+	printk("CPU: %s [%08x] revision %d\n",
+	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15);
+
+	sprintf(init_utsname()->machine, "aarch64");
+	elf_hwcap = 0;
+}
+
+static void __init setup_machine_fdt(phys_addr_t dt_phys)
+{
+	struct boot_param_header *devtree;
+	unsigned long dt_root;
+
+	/* Check we have a non-NULL DT pointer */
+	if (!dt_phys) {
+		early_print("\n"
+			"Error: NULL or invalid device tree blob\n"
+			"The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
+			"\nPlease check your bootloader.\n");
+
+		while (true)
+			cpu_relax();
+
+	}
+
+	devtree = phys_to_virt(dt_phys);
+
+	/* Check device tree validity */
+	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) {
+		early_print("\n"
+			"Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n"
+			"Expected 0x%x, found 0x%x\n"
+			"\nPlease check your bootloader.\n",
+			dt_phys, devtree, OF_DT_HEADER,
+			be32_to_cpu(devtree->magic));
+
+		while (true)
+			cpu_relax();
+	}
+
+	initial_boot_params = devtree;
+	dt_root = of_get_flat_dt_root();
+
+	machine_name = of_get_flat_dt_prop(dt_root, "model", NULL);
+	if (!machine_name)
+		machine_name = of_get_flat_dt_prop(dt_root, "compatible", NULL);
+	if (!machine_name)
+		machine_name = "<unknown>";
+	pr_info("Machine: %s\n", machine_name);
+
+	/* Retrieve various information from the /chosen node */
+	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
+	/* Initialize {size,address}-cells info */
+	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+	/* Setup memory, calling early_init_dt_add_memory_arch */
+	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+}
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+	size &= PAGE_MASK;
+	memblock_add(base, size);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return __va(memblock_alloc(size, align));
+}
+
+/*
+ * Limit the memory size that was specified via FDT.
+ */
+static int __init early_mem(char *p)
+{
+	phys_addr_t limit;
+
+	if (!p)
+		return 1;
+
+	limit = memparse(p, &p) & PAGE_MASK;
+	pr_notice("Memory limited to %lldMB\n", limit >> 20);
+
+	memblock_enforce_memory_limit(limit);
+
+	return 0;
+}
+early_param("mem", early_mem);
+
+static void __init request_standard_resources(void)
+{
+	struct memblock_region *region;
+	struct resource *res;
+
+	kernel_code.start   = virt_to_phys(_text);
+	kernel_code.end     = virt_to_phys(_etext - 1);
+	kernel_data.start   = virt_to_phys(_sdata);
+	kernel_data.end     = virt_to_phys(_end - 1);
+
+	for_each_memblock(memory, region) {
+		res = alloc_bootmem_low(sizeof(*res));
+		res->name  = "System RAM";
+		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
+		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+		request_resource(&iomem_resource, res);
+
+		if (kernel_code.start >= res->start &&
+		    kernel_code.end <= res->end)
+			request_resource(res, &kernel_code);
+		if (kernel_data.start >= res->start &&
+		    kernel_data.end <= res->end)
+			request_resource(res, &kernel_data);
+	}
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	setup_processor();
+
+	setup_machine_fdt(__fdt_pointer);
+
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code   = (unsigned long) _etext;
+	init_mm.end_data   = (unsigned long) _edata;
+	init_mm.brk	   = (unsigned long) _end;
+
+	*cmdline_p = boot_command_line;
+
+	parse_early_param();
+
+	arm64_memblock_init();
+
+	paging_init();
+	request_standard_resources();
+
+	unflatten_device_tree();
+
+#ifdef CONFIG_SMP
+	smp_init_cpus();
+#endif
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
+
+static DEFINE_PER_CPU(struct cpu, cpu_data);
+
+static int __init topology_init(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct cpu *cpu = &per_cpu(cpu_data, i);
+		cpu->hotpluggable = 1;
+		register_cpu(cpu, i);
+	}
+
+	return 0;
+}
+subsys_initcall(topology_init);
+
+static const char *hwcap_str[] = {
+	"fp",
+	"asimd",
+	NULL
+};
+
+static int c_show(struct seq_file *m, void *v)
+{
+	int i;
+
+	seq_printf(m, "Processor\t: %s rev %d (%s)\n",
+		   cpu_name, read_cpuid_id() & 15, ELF_PLATFORM);
+
+	for_each_online_cpu(i) {
+		/*
+		 * glibc reads /proc/cpuinfo to determine the number of
+		 * online processors, looking for lines beginning with
+		 * "processor".  Give glibc what it expects.
+		 */
+#ifdef CONFIG_SMP
+		seq_printf(m, "processor\t: %d\n", i);
+#endif
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
+			   loops_per_jiffy / (500000UL/HZ),
+			   loops_per_jiffy / (5000UL/HZ) % 100);
+	}
+
+	/* dump out the processor features */
+	seq_puts(m, "Features\t: ");
+
+	for (i = 0; hwcap_str[i]; i++)
+		if (elf_hwcap & (1 << i))
+			seq_printf(m, "%s ", hwcap_str[i]);
+
+	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
+	seq_printf(m, "CPU architecture: AArch64\n");
+	seq_printf(m, "CPU variant\t: 0x%x\n", (read_cpuid_id() >> 20) & 15);
+	seq_printf(m, "CPU part\t: 0x%03x\n", (read_cpuid_id() >> 4) & 0xfff);
+	seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
+
+	seq_puts(m, "\n");
+
+	seq_printf(m, "Hardware\t: %s\n", machine_name);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= c_show
+};
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
new file mode 100644
index 000000000000..8807ba2cf262
--- /dev/null
+++ b/arch/arm64/kernel/signal.c
@@ -0,0 +1,437 @@
+/*
+ * Based on arch/arm/kernel/signal.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/freezer.h>
+#include <linux/uaccess.h>
+#include <linux/tracehook.h>
+#include <linux/ratelimit.h>
+
+#include <asm/compat.h>
+#include <asm/debug-monitors.h>
+#include <asm/elf.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/unistd.h>
+#include <asm/fpsimd.h>
+#include <asm/signal32.h>
+#include <asm/vdso.h>
+
+/*
+ * Do a signal return; undo the signal stack. These are aligned to 128-bit.
+ */
+struct rt_sigframe {
+	struct siginfo info;
+	struct ucontext uc;
+};
+
+static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
+{
+	struct fpsimd_state *fpsimd = &current->thread.fpsimd_state;
+	int err;
+
+	/* dump the hardware registers to the fpsimd_state structure */
+	fpsimd_save_state(fpsimd);
+
+	/* copy the FP and status/control registers */
+	err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
+	__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
+	__put_user_error(fpsimd->fpcr, &ctx->fpcr, err);
+
+	/* copy the magic/size information */
+	__put_user_error(FPSIMD_MAGIC, &ctx->head.magic, err);
+	__put_user_error(sizeof(struct fpsimd_context), &ctx->head.size, err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
+{
+	struct fpsimd_state fpsimd;
+	__u32 magic, size;
+	int err = 0;
+
+	/* check the magic/size information */
+	__get_user_error(magic, &ctx->head.magic, err);
+	__get_user_error(size, &ctx->head.size, err);
+	if (err)
+		return -EFAULT;
+	if (magic != FPSIMD_MAGIC || size != sizeof(struct fpsimd_context))
+		return -EINVAL;
+
+	/* copy the FP and status/control registers */
+	err = __copy_from_user(fpsimd.vregs, ctx->vregs,
+			       sizeof(fpsimd.vregs));
+	__get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
+	__get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
+
+	/* load the hardware registers from the fpsimd_state structure */
+	if (!err) {
+		preempt_disable();
+		fpsimd_load_state(&fpsimd);
+		preempt_enable();
+	}
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_sigframe(struct pt_regs *regs,
+			    struct rt_sigframe __user *sf)
+{
+	sigset_t set;
+	int i, err;
+	struct aux_context __user *aux =
+		(struct aux_context __user *)sf->uc.uc_mcontext.__reserved;
+
+	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
+	if (err == 0)
+		set_current_blocked(&set);
+
+	for (i = 0; i < 31; i++)
+		__get_user_error(regs->regs[i], &sf->uc.uc_mcontext.regs[i],
+				 err);
+	__get_user_error(regs->sp, &sf->uc.uc_mcontext.sp, err);
+	__get_user_error(regs->pc, &sf->uc.uc_mcontext.pc, err);
+	__get_user_error(regs->pstate, &sf->uc.uc_mcontext.pstate, err);
+
+	/*
+	 * Avoid sys_rt_sigreturn() restarting.
+	 */
+	regs->syscallno = ~0UL;
+
+	err |= !valid_user_regs(&regs->user_regs);
+
+	if (err == 0)
+		err |= restore_fpsimd_context(&aux->fpsimd);
+
+	return err;
+}
+
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 128-bit boundary, then 'sp' should
+	 * be word aligned here.
+	 */
+	if (regs->sp & 15)
+		goto badframe;
+
+	frame = (struct rt_sigframe __user *)regs->sp;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
+		goto badframe;
+
+	if (restore_sigframe(regs, frame))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->uc.uc_stack,
+			   NULL, regs->sp) == -EFAULT)
+		goto badframe;
+
+	return regs->regs[0];
+
+badframe:
+	if (show_unhandled_signals)
+		pr_info_ratelimited("%s[%d]: bad frame in %s: pc=%08llx sp=%08llx\n",
+				    current->comm, task_pid_nr(current), __func__,
+				    regs->pc, regs->sp);
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+				unsigned long sp)
+{
+	return do_sigaltstack(uss, uoss, sp);
+}
+
+static int setup_sigframe(struct rt_sigframe __user *sf,
+			  struct pt_regs *regs, sigset_t *set)
+{
+	int i, err = 0;
+	struct aux_context __user *aux =
+		(struct aux_context __user *)sf->uc.uc_mcontext.__reserved;
+
+	for (i = 0; i < 31; i++)
+		__put_user_error(regs->regs[i], &sf->uc.uc_mcontext.regs[i],
+				 err);
+	__put_user_error(regs->sp, &sf->uc.uc_mcontext.sp, err);
+	__put_user_error(regs->pc, &sf->uc.uc_mcontext.pc, err);
+	__put_user_error(regs->pstate, &sf->uc.uc_mcontext.pstate, err);
+
+	__put_user_error(current->thread.fault_address, &sf->uc.uc_mcontext.fault_address, err);
+
+	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err == 0)
+		err |= preserve_fpsimd_context(&aux->fpsimd);
+
+	/* set the "end" magic */
+	__put_user_error(0, &aux->end.magic, err);
+	__put_user_error(0, &aux->end.size, err);
+
+	return err;
+}
+
+static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
+				 int framesize)
+{
+	unsigned long sp, sp_top;
+	void __user *frame;
+
+	sp = sp_top = regs->sp;
+
+	/*
+	 * This is the X/Open sanctioned signal stack switching.
+	 */
+	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
+		sp = sp_top = current->sas_ss_sp + current->sas_ss_size;
+
+	/* room for stack frame (FP, LR) */
+	sp -= 16;
+
+	sp = (sp - framesize) & ~15;
+	frame = (void __user *)sp;
+
+	/*
+	 * Check that we can actually write to the signal frame.
+	 */
+	if (!access_ok(VERIFY_WRITE, frame, sp_top - sp))
+		frame = NULL;
+
+	return frame;
+}
+
+static int setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+			void __user *frame, int usig)
+{
+	int err = 0;
+	__sigrestore_t sigtramp;
+	unsigned long __user *sp = (unsigned long __user *)regs->sp;
+
+	/* set up the stack frame */
+	__put_user_error(regs->regs[29], sp - 2, err);
+	__put_user_error(regs->regs[30], sp - 1, err);
+
+	regs->regs[0] = usig;
+	regs->regs[29] = regs->sp - 16;
+	regs->sp = (unsigned long)frame;
+	regs->pc = (unsigned long)ka->sa.sa_handler;
+
+	if (ka->sa.sa_flags & SA_RESTORER)
+		sigtramp = ka->sa.sa_restorer;
+	else
+		sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp);
+
+	regs->regs[30] = (unsigned long)sigtramp;
+
+	return err;
+}
+
+static int setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
+			  sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	stack_t stack;
+	int err = 0;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+	if (!frame)
+		return 1;
+
+	__put_user_error(0, &frame->uc.uc_flags, err);
+	__put_user_error(NULL, &frame->uc.uc_link, err);
+
+	memset(&stack, 0, sizeof(stack));
+	stack.ss_sp = (void __user *)current->sas_ss_sp;
+	stack.ss_flags = sas_ss_flags(regs->sp);
+	stack.ss_size = current->sas_ss_size;
+	err |= __copy_to_user(&frame->uc.uc_stack, &stack, sizeof(stack));
+
+	err |= setup_sigframe(frame, regs, set);
+	if (err == 0)
+		err = setup_return(regs, ka, frame, usig);
+
+	if (err == 0 && ka->sa.sa_flags & SA_SIGINFO) {
+		err |= copy_siginfo_to_user(&frame->info, info);
+		regs->regs[1] = (unsigned long)&frame->info;
+		regs->regs[2] = (unsigned long)&frame->uc;
+	}
+
+	return err;
+}
+
+static void setup_restart_syscall(struct pt_regs *regs)
+{
+	if (is_compat_task())
+		compat_setup_restart_syscall(regs);
+	else
+		regs->regs[8] = __NR_restart_syscall;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void handle_signal(unsigned long sig, struct k_sigaction *ka,
+			  siginfo_t *info, struct pt_regs *regs)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = current;
+	sigset_t *oldset = sigmask_to_save();
+	int usig = sig;
+	int ret;
+
+	/*
+	 * translate the signal
+	 */
+	if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
+		usig = thread->exec_domain->signal_invmap[usig];
+
+	/*
+	 * Set up the stack frame
+	 */
+	if (is_compat_task()) {
+		if (ka->sa.sa_flags & SA_SIGINFO)
+			ret = compat_setup_rt_frame(usig, ka, info, oldset,
+						    regs);
+		else
+			ret = compat_setup_frame(usig, ka, oldset, regs);
+	} else {
+		ret = setup_rt_frame(usig, ka, info, oldset, regs);
+	}
+
+	/*
+	 * Check that the resulting registers are actually sane.
+	 */
+	ret |= !valid_user_regs(&regs->user_regs);
+
+	if (ret != 0) {
+		force_sigsegv(sig, tsk);
+		return;
+	}
+
+	/*
+	 * Fast forward the stepping logic so we step into the signal
+	 * handler.
+	 */
+	user_fastforward_single_step(tsk);
+
+	signal_delivered(sig, info, ka, regs, 0);
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs)
+{
+	unsigned long continue_addr = 0, restart_addr = 0;
+	struct k_sigaction ka;
+	siginfo_t info;
+	int signr, retval = 0;
+	int syscall = (int)regs->syscallno;
+
+	/*
+	 * If we were from a system call, check for system call restarting...
+	 */
+	if (syscall >= 0) {
+		continue_addr = regs->pc;
+		restart_addr = continue_addr - (compat_thumb_mode(regs) ? 2 : 4);
+		retval = regs->regs[0];
+
+		/*
+		 * Avoid additional syscall restarting via ret_to_user.
+		 */
+		regs->syscallno = ~0UL;
+
+		/*
+		 * Prepare for system call restart. We do this here so that a
+		 * debugger will see the already changed PC.
+		 */
+		switch (retval) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[0] = regs->orig_x0;
+			regs->pc = restart_addr;
+			break;
+		}
+	}
+
+	/*
+	 * Get the signal to deliver. When running under ptrace, at this point
+	 * the debugger may change all of our registers.
+	 */
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		/*
+		 * Depending on the signal settings, we may need to revert the
+		 * decision to restart the system call, but skip this if a
+		 * debugger has chosen to restart at a different PC.
+		 */
+		if (regs->pc == restart_addr &&
+		    (retval == -ERESTARTNOHAND ||
+		     retval == -ERESTART_RESTARTBLOCK ||
+		     (retval == -ERESTARTSYS &&
+		      !(ka.sa.sa_flags & SA_RESTART)))) {
+			regs->regs[0] = -EINTR;
+			regs->pc = continue_addr;
+		}
+
+		handle_signal(signr, &ka, &info, regs);
+		return;
+	}
+
+	/*
+	 * Handle restarting a different system call. As above, if a debugger
+	 * has chosen to restart at a different PC, ignore the restart.
+	 */
+	if (syscall >= 0 && regs->pc == restart_addr) {
+		if (retval == -ERESTART_RESTARTBLOCK)
+			setup_restart_syscall(regs);
+		user_rewind_single_step(current);
+	}
+
+	restore_saved_sigmask();
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs,
+				 unsigned int thread_flags)
+{
+	if (thread_flags & _TIF_SIGPENDING)
+		do_signal(regs);
+
+	if (thread_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
new file mode 100644
index 000000000000..0790a87a4346
--- /dev/null
+++ b/arch/arm64/kernel/signal32.c
@@ -0,0 +1,823 @@
+/*
+ * Based on arch/arm/kernel/signal.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ * Modified by Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define __SYSCALL_COMPAT
+
+#include <linux/compat.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/ratelimit.h>
+
+#include <asm/fpsimd.h>
+#include <asm/signal32.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+
+struct compat_sigaction {
+	compat_uptr_t			sa_handler;
+	compat_ulong_t			sa_flags;
+	compat_uptr_t			sa_restorer;
+	compat_sigset_t			sa_mask;
+};
+
+struct compat_old_sigaction {
+	compat_uptr_t			sa_handler;
+	compat_old_sigset_t		sa_mask;
+	compat_ulong_t			sa_flags;
+	compat_uptr_t			sa_restorer;
+};
+
+typedef struct compat_sigaltstack {
+	compat_uptr_t			ss_sp;
+	int				ss_flags;
+	compat_size_t			ss_size;
+} compat_stack_t;
+
+struct compat_sigcontext {
+	/* We always set these two fields to 0 */
+	compat_ulong_t			trap_no;
+	compat_ulong_t			error_code;
+
+	compat_ulong_t			oldmask;
+	compat_ulong_t			arm_r0;
+	compat_ulong_t			arm_r1;
+	compat_ulong_t			arm_r2;
+	compat_ulong_t			arm_r3;
+	compat_ulong_t			arm_r4;
+	compat_ulong_t			arm_r5;
+	compat_ulong_t			arm_r6;
+	compat_ulong_t			arm_r7;
+	compat_ulong_t			arm_r8;
+	compat_ulong_t			arm_r9;
+	compat_ulong_t			arm_r10;
+	compat_ulong_t			arm_fp;
+	compat_ulong_t			arm_ip;
+	compat_ulong_t			arm_sp;
+	compat_ulong_t			arm_lr;
+	compat_ulong_t			arm_pc;
+	compat_ulong_t			arm_cpsr;
+	compat_ulong_t			fault_address;
+};
+
+struct compat_ucontext {
+	compat_ulong_t			uc_flags;
+	struct compat_ucontext		*uc_link;
+	compat_stack_t			uc_stack;
+	struct compat_sigcontext	uc_mcontext;
+	compat_sigset_t			uc_sigmask;
+	int		__unused[32 - (sizeof (compat_sigset_t) / sizeof (int))];
+	compat_ulong_t	uc_regspace[128] __attribute__((__aligned__(8)));
+};
+
+struct compat_vfp_sigframe {
+	compat_ulong_t	magic;
+	compat_ulong_t	size;
+	struct compat_user_vfp {
+		compat_u64	fpregs[32];
+		compat_ulong_t	fpscr;
+	} ufp;
+	struct compat_user_vfp_exc {
+		compat_ulong_t	fpexc;
+		compat_ulong_t	fpinst;
+		compat_ulong_t	fpinst2;
+	} ufp_exc;
+} __attribute__((__aligned__(8)));
+
+#define VFP_MAGIC		0x56465001
+#define VFP_STORAGE_SIZE	sizeof(struct compat_vfp_sigframe)
+
+struct compat_aux_sigframe {
+	struct compat_vfp_sigframe	vfp;
+
+	/* Something that isn't a valid magic number for any coprocessor.  */
+	unsigned long			end_magic;
+} __attribute__((__aligned__(8)));
+
+struct compat_sigframe {
+	struct compat_ucontext	uc;
+	compat_ulong_t		retcode[2];
+};
+
+struct compat_rt_sigframe {
+	struct compat_siginfo info;
+	struct compat_sigframe sig;
+};
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * For ARM syscalls, the syscall number has to be loaded into r7.
+ * We do not support an OABI userspace.
+ */
+#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | __NR_sigreturn)
+#define SVC_SYS_SIGRETURN	(0xef000000 | __NR_sigreturn)
+#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | __NR_rt_sigreturn)
+#define SVC_SYS_RT_SIGRETURN	(0xef000000 | __NR_rt_sigreturn)
+
+/*
+ * For Thumb syscalls, we also pass the syscall number via r7. We therefore
+ * need two 16-bit instructions.
+ */
+#define SVC_THUMB_SIGRETURN	(((0xdf00 | __NR_sigreturn) << 16) | \
+				   0x2700 | __NR_sigreturn)
+#define SVC_THUMB_RT_SIGRETURN	(((0xdf00 | __NR_rt_sigreturn) << 16) | \
+				   0x2700 | __NR_rt_sigreturn)
+
+const compat_ulong_t aarch32_sigret_code[6] = {
+	/*
+	 * AArch32 sigreturn code.
+	 * We don't construct an OABI SWI - instead we just set the imm24 field
+	 * to the EABI syscall number so that we create a sane disassembly.
+	 */
+	MOV_R7_NR_SIGRETURN,    SVC_SYS_SIGRETURN,    SVC_THUMB_SIGRETURN,
+	MOV_R7_NR_RT_SIGRETURN, SVC_SYS_RT_SIGRETURN, SVC_THUMB_RT_SIGRETURN,
+};
+
+static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
+{
+	compat_sigset_t	cset;
+
+	cset.sig[0] = set->sig[0] & 0xffffffffull;
+	cset.sig[1] = set->sig[0] >> 32;
+
+	return copy_to_user(uset, &cset, sizeof(*uset));
+}
+
+static inline int get_sigset_t(sigset_t *set,
+			       const compat_sigset_t __user *uset)
+{
+	compat_sigset_t s32;
+
+	if (copy_from_user(&s32, uset, sizeof(*uset)))
+		return -EFAULT;
+
+	set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
+	return 0;
+}
+
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
+{
+	int err;
+
+	if (!access_ok(VERIFY_WRITE, to, sizeof(*to)))
+		return -EFAULT;
+
+	/* If you change siginfo_t structure, please be sure
+	 * this code is fixed accordingly.
+	 * It should never copy any pad contained in the structure
+	 * to avoid security leaks, but must copy the generic
+	 * 3 ints plus the relevant union member.
+	 * This routine must convert siginfo from 64bit to 32bit as well
+	 * at the same time.
+	 */
+	err = __put_user(from->si_signo, &to->si_signo);
+	err |= __put_user(from->si_errno, &to->si_errno);
+	err |= __put_user((short)from->si_code, &to->si_code);
+	if (from->si_code < 0)
+		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
+				      SI_PAD_SIZE);
+	else switch (from->si_code & __SI_MASK) {
+	case __SI_KILL:
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		break;
+	case __SI_TIMER:
+		 err |= __put_user(from->si_tid, &to->si_tid);
+		 err |= __put_user(from->si_overrun, &to->si_overrun);
+		 err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr,
+				   &to->si_ptr);
+		break;
+	case __SI_POLL:
+		err |= __put_user(from->si_band, &to->si_band);
+		err |= __put_user(from->si_fd, &to->si_fd);
+		break;
+	case __SI_FAULT:
+		err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
+				  &to->si_addr);
+#ifdef BUS_MCEERR_AO
+		/*
+		 * Other callers might not initialize the si_lsb field,
+		 * so check explicitely for the right codes here.
+		 */
+		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
+#endif
+		break;
+	case __SI_CHLD:
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		err |= __put_user(from->si_status, &to->si_status);
+		err |= __put_user(from->si_utime, &to->si_utime);
+		err |= __put_user(from->si_stime, &to->si_stime);
+		break;
+	case __SI_RT: /* This is not generated by the kernel as of now. */
+	case __SI_MESGQ: /* But this is */
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
+		break;
+	default: /* this is just in case for now ... */
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		break;
+	}
+	return err;
+}
+
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+	memset(to, 0, sizeof *to);
+
+	if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
+	    copy_from_user(to->_sifields._pad,
+			   from->_sifields._pad, SI_PAD_SIZE))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * VFP save/restore code.
+ */
+static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
+{
+	struct fpsimd_state *fpsimd = &current->thread.fpsimd_state;
+	compat_ulong_t magic = VFP_MAGIC;
+	compat_ulong_t size = VFP_STORAGE_SIZE;
+	compat_ulong_t fpscr, fpexc;
+	int err = 0;
+
+	/*
+	 * Save the hardware registers to the fpsimd_state structure.
+	 * Note that this also saves V16-31, which aren't visible
+	 * in AArch32.
+	 */
+	fpsimd_save_state(fpsimd);
+
+	/* Place structure header on the stack */
+	__put_user_error(magic, &frame->magic, err);
+	__put_user_error(size, &frame->size, err);
+
+	/*
+	 * Now copy the FP registers. Since the registers are packed,
+	 * we can copy the prefix we want (V0-V15) as it is.
+	 * FIXME: Won't work if big endian.
+	 */
+	err |= __copy_to_user(&frame->ufp.fpregs, fpsimd->vregs,
+			      sizeof(frame->ufp.fpregs));
+
+	/* Create an AArch32 fpscr from the fpsr and the fpcr. */
+	fpscr = (fpsimd->fpsr & VFP_FPSCR_STAT_MASK) |
+		(fpsimd->fpcr & VFP_FPSCR_CTRL_MASK);
+	__put_user_error(fpscr, &frame->ufp.fpscr, err);
+
+	/*
+	 * The exception register aren't available so we fake up a
+	 * basic FPEXC and zero everything else.
+	 */
+	fpexc = (1 << 30);
+	__put_user_error(fpexc, &frame->ufp_exc.fpexc, err);
+	__put_user_error(0, &frame->ufp_exc.fpinst, err);
+	__put_user_error(0, &frame->ufp_exc.fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame)
+{
+	struct fpsimd_state fpsimd;
+	compat_ulong_t magic = VFP_MAGIC;
+	compat_ulong_t size = VFP_STORAGE_SIZE;
+	compat_ulong_t fpscr;
+	int err = 0;
+
+	__get_user_error(magic, &frame->magic, err);
+	__get_user_error(size, &frame->size, err);
+
+	if (err)
+		return -EFAULT;
+	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
+		return -EINVAL;
+
+	/*
+	 * Copy the FP registers into the start of the fpsimd_state.
+	 * FIXME: Won't work if big endian.
+	 */
+	err |= __copy_from_user(fpsimd.vregs, frame->ufp.fpregs,
+				sizeof(frame->ufp.fpregs));
+
+	/* Extract the fpsr and the fpcr from the fpscr */
+	__get_user_error(fpscr, &frame->ufp.fpscr, err);
+	fpsimd.fpsr = fpscr & VFP_FPSCR_STAT_MASK;
+	fpsimd.fpcr = fpscr & VFP_FPSCR_CTRL_MASK;
+
+	/*
+	 * We don't need to touch the exception register, so
+	 * reload the hardware state.
+	 */
+	if (!err) {
+		preempt_disable();
+		fpsimd_load_state(&fpsimd);
+		preempt_enable();
+	}
+
+	return err ? -EFAULT : 0;
+}
+
+/*
+ * atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int compat_sys_sigsuspend(int restart, compat_ulong_t oldmask,
+				     compat_old_sigset_t mask)
+{
+	sigset_t blocked;
+
+	siginitset(&current->blocked, mask);
+	return sigsuspend(&blocked);
+}
+
+asmlinkage int compat_sys_sigaction(int sig,
+				    const struct compat_old_sigaction __user *act,
+				    struct compat_old_sigaction __user *oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+	compat_old_sigset_t mask;
+	compat_uptr_t handler, restorer;
+
+	if (act) {
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(handler, &act->sa_handler) ||
+		    __get_user(restorer, &act->sa_restorer) ||
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
+			return -EFAULT;
+
+		new_ka.sa.sa_handler = compat_ptr(handler);
+		new_ka.sa.sa_restorer = compat_ptr(restorer);
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(ptr_to_compat(old_ka.sa.sa_handler),
+			       &oact->sa_handler) ||
+		    __put_user(ptr_to_compat(old_ka.sa.sa_restorer),
+			       &oact->sa_restorer) ||
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
+			return -EFAULT;
+	}
+
+	return ret;
+}
+
+asmlinkage int compat_sys_rt_sigaction(int sig,
+				       const struct compat_sigaction __user *act,
+				       struct compat_sigaction __user *oact,
+				       compat_size_t sigsetsize)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(compat_sigset_t))
+		return -EINVAL;
+
+	if (act) {
+		compat_uptr_t handler, restorer;
+
+		ret = get_user(handler, &act->sa_handler);
+		new_ka.sa.sa_handler = compat_ptr(handler);
+		ret |= get_user(restorer, &act->sa_restorer);
+		new_ka.sa.sa_restorer = compat_ptr(restorer);
+		ret |= get_sigset_t(&new_ka.sa.sa_mask, &act->sa_mask);
+		ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		if (ret)
+			return -EFAULT;
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+	if (!ret && oact) {
+		ret = put_user(ptr_to_compat(old_ka.sa.sa_handler), &oact->sa_handler);
+		ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask);
+		ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+	}
+	return ret;
+}
+
+int compat_do_sigaltstack(compat_uptr_t compat_uss, compat_uptr_t compat_uoss,
+			  compat_ulong_t sp)
+{
+	compat_stack_t __user *newstack = compat_ptr(compat_uss);
+	compat_stack_t __user *oldstack = compat_ptr(compat_uoss);
+	compat_uptr_t ss_sp;
+	int ret;
+	mm_segment_t old_fs;
+	stack_t uss, uoss;
+
+	/* Marshall the compat new stack into a stack_t */
+	if (newstack) {
+		if (get_user(ss_sp, &newstack->ss_sp) ||
+		    __get_user(uss.ss_flags, &newstack->ss_flags) ||
+		    __get_user(uss.ss_size, &newstack->ss_size))
+			return -EFAULT;
+		uss.ss_sp = compat_ptr(ss_sp);
+	}
+
+	old_fs = get_fs();
+	set_fs(KERNEL_DS);
+	/* The __user pointer casts are valid because of the set_fs() */
+	ret = do_sigaltstack(
+		newstack ? (stack_t __user *) &uss : NULL,
+		oldstack ? (stack_t __user *) &uoss : NULL,
+		(unsigned long)sp);
+	set_fs(old_fs);
+
+	/* Convert the old stack_t into a compat stack. */
+	if (!ret && oldstack &&
+		(put_user(ptr_to_compat(uoss.ss_sp), &oldstack->ss_sp) ||
+		 __put_user(uoss.ss_flags, &oldstack->ss_flags) ||
+		 __put_user(uoss.ss_size, &oldstack->ss_size)))
+		return -EFAULT;
+	return ret;
+}
+
+static int compat_restore_sigframe(struct pt_regs *regs,
+				   struct compat_sigframe __user *sf)
+{
+	int err;
+	sigset_t set;
+	struct compat_aux_sigframe __user *aux;
+
+	err = get_sigset_t(&set, &sf->uc.uc_sigmask);
+	if (err == 0) {
+		sigdelsetmask(&set, ~_BLOCKABLE);
+		set_current_blocked(&set);
+	}
+
+	__get_user_error(regs->regs[0], &sf->uc.uc_mcontext.arm_r0, err);
+	__get_user_error(regs->regs[1], &sf->uc.uc_mcontext.arm_r1, err);
+	__get_user_error(regs->regs[2], &sf->uc.uc_mcontext.arm_r2, err);
+	__get_user_error(regs->regs[3], &sf->uc.uc_mcontext.arm_r3, err);
+	__get_user_error(regs->regs[4], &sf->uc.uc_mcontext.arm_r4, err);
+	__get_user_error(regs->regs[5], &sf->uc.uc_mcontext.arm_r5, err);
+	__get_user_error(regs->regs[6], &sf->uc.uc_mcontext.arm_r6, err);
+	__get_user_error(regs->regs[7], &sf->uc.uc_mcontext.arm_r7, err);
+	__get_user_error(regs->regs[8], &sf->uc.uc_mcontext.arm_r8, err);
+	__get_user_error(regs->regs[9], &sf->uc.uc_mcontext.arm_r9, err);
+	__get_user_error(regs->regs[10], &sf->uc.uc_mcontext.arm_r10, err);
+	__get_user_error(regs->regs[11], &sf->uc.uc_mcontext.arm_fp, err);
+	__get_user_error(regs->regs[12], &sf->uc.uc_mcontext.arm_ip, err);
+	__get_user_error(regs->compat_sp, &sf->uc.uc_mcontext.arm_sp, err);
+	__get_user_error(regs->compat_lr, &sf->uc.uc_mcontext.arm_lr, err);
+	__get_user_error(regs->pc, &sf->uc.uc_mcontext.arm_pc, err);
+	__get_user_error(regs->pstate, &sf->uc.uc_mcontext.arm_cpsr, err);
+
+	/*
+	 * Avoid compat_sys_sigreturn() restarting.
+	 */
+	regs->syscallno = ~0UL;
+
+	err |= !valid_user_regs(&regs->user_regs);
+
+	aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace;
+	if (err == 0)
+		err |= compat_restore_vfp_context(&aux->vfp);
+
+	return err;
+}
+
+asmlinkage int compat_sys_sigreturn(struct pt_regs *regs)
+{
+	struct compat_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 64-bit boundary,
+	 * then 'sp' should be word aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (regs->compat_sp & 7)
+		goto badframe;
+
+	frame = (struct compat_sigframe __user *)regs->compat_sp;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
+		goto badframe;
+
+	if (compat_restore_sigframe(regs, frame))
+		goto badframe;
+
+	return regs->regs[0];
+
+badframe:
+	if (show_unhandled_signals)
+		pr_info_ratelimited("%s[%d]: bad frame in %s: pc=%08llx sp=%08llx\n",
+				    current->comm, task_pid_nr(current), __func__,
+				    regs->pc, regs->sp);
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+asmlinkage int compat_sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct compat_rt_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 64-bit boundary,
+	 * then 'sp' should be word aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (regs->compat_sp & 7)
+		goto badframe;
+
+	frame = (struct compat_rt_sigframe __user *)regs->compat_sp;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
+		goto badframe;
+
+	if (compat_restore_sigframe(regs, &frame->sig))
+		goto badframe;
+
+	if (compat_do_sigaltstack(ptr_to_compat(&frame->sig.uc.uc_stack),
+				 ptr_to_compat((void __user *)NULL),
+				 regs->compat_sp) == -EFAULT)
+		goto badframe;
+
+	return regs->regs[0];
+
+badframe:
+	if (show_unhandled_signals)
+		pr_info_ratelimited("%s[%d]: bad frame in %s: pc=%08llx sp=%08llx\n",
+				    current->comm, task_pid_nr(current), __func__,
+				    regs->pc, regs->sp);
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+static inline void __user *compat_get_sigframe(struct k_sigaction *ka,
+					       struct pt_regs *regs,
+					       int framesize)
+{
+	compat_ulong_t sp = regs->compat_sp;
+	void __user *frame;
+
+	/*
+	 * This is the X/Open sanctioned signal stack switching.
+	 */
+	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+	/*
+	 * ATPCS B01 mandates 8-byte alignment
+	 */
+	frame = compat_ptr((compat_uptr_t)((sp - framesize) & ~7));
+
+	/*
+	 * Check that we can actually write to the signal frame.
+	 */
+	if (!access_ok(VERIFY_WRITE, frame, framesize))
+		frame = NULL;
+
+	return frame;
+}
+
+static int compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+			       compat_ulong_t __user *rc, void __user *frame,
+			       int usig)
+{
+	compat_ulong_t handler = ptr_to_compat(ka->sa.sa_handler);
+	compat_ulong_t retcode;
+	compat_ulong_t spsr = regs->pstate & ~PSR_f;
+	int thumb;
+
+	/* Check if the handler is written for ARM or Thumb */
+	thumb = handler & 1;
+
+	if (thumb) {
+		spsr |= COMPAT_PSR_T_BIT;
+		spsr &= ~COMPAT_PSR_IT_MASK;
+	} else {
+		spsr &= ~COMPAT_PSR_T_BIT;
+	}
+
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		retcode = ptr_to_compat(ka->sa.sa_restorer);
+	} else {
+		/* Set up sigreturn pointer */
+		unsigned int idx = thumb << 1;
+
+		if (ka->sa.sa_flags & SA_SIGINFO)
+			idx += 3;
+
+		retcode = AARCH32_VECTORS_BASE +
+			  AARCH32_KERN_SIGRET_CODE_OFFSET +
+			  (idx << 2) + thumb;
+	}
+
+	regs->regs[0]	= usig;
+	regs->compat_sp	= ptr_to_compat(frame);
+	regs->compat_lr	= retcode;
+	regs->pc	= handler;
+	regs->pstate	= spsr;
+
+	return 0;
+}
+
+static int compat_setup_sigframe(struct compat_sigframe __user *sf,
+				 struct pt_regs *regs, sigset_t *set)
+{
+	struct compat_aux_sigframe __user *aux;
+	int err = 0;
+
+	__put_user_error(regs->regs[0], &sf->uc.uc_mcontext.arm_r0, err);
+	__put_user_error(regs->regs[1], &sf->uc.uc_mcontext.arm_r1, err);
+	__put_user_error(regs->regs[2], &sf->uc.uc_mcontext.arm_r2, err);
+	__put_user_error(regs->regs[3], &sf->uc.uc_mcontext.arm_r3, err);
+	__put_user_error(regs->regs[4], &sf->uc.uc_mcontext.arm_r4, err);
+	__put_user_error(regs->regs[5], &sf->uc.uc_mcontext.arm_r5, err);
+	__put_user_error(regs->regs[6], &sf->uc.uc_mcontext.arm_r6, err);
+	__put_user_error(regs->regs[7], &sf->uc.uc_mcontext.arm_r7, err);
+	__put_user_error(regs->regs[8], &sf->uc.uc_mcontext.arm_r8, err);
+	__put_user_error(regs->regs[9], &sf->uc.uc_mcontext.arm_r9, err);
+	__put_user_error(regs->regs[10], &sf->uc.uc_mcontext.arm_r10, err);
+	__put_user_error(regs->regs[11], &sf->uc.uc_mcontext.arm_fp, err);
+	__put_user_error(regs->regs[12], &sf->uc.uc_mcontext.arm_ip, err);
+	__put_user_error(regs->compat_sp, &sf->uc.uc_mcontext.arm_sp, err);
+	__put_user_error(regs->compat_lr, &sf->uc.uc_mcontext.arm_lr, err);
+	__put_user_error(regs->pc, &sf->uc.uc_mcontext.arm_pc, err);
+	__put_user_error(regs->pstate, &sf->uc.uc_mcontext.arm_cpsr, err);
+
+	__put_user_error((compat_ulong_t)0, &sf->uc.uc_mcontext.trap_no, err);
+	__put_user_error((compat_ulong_t)0, &sf->uc.uc_mcontext.error_code, err);
+	__put_user_error(current->thread.fault_address, &sf->uc.uc_mcontext.fault_address, err);
+	__put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err);
+
+	err |= put_sigset_t(&sf->uc.uc_sigmask, set);
+
+	aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace;
+
+	if (err == 0)
+		err |= compat_preserve_vfp_context(&aux->vfp);
+	__put_user_error(0, &aux->end_magic, err);
+
+	return err;
+}
+
+/*
+ * 32-bit signal handling routines called from signal.c
+ */
+int compat_setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
+			  sigset_t *set, struct pt_regs *regs)
+{
+	struct compat_rt_sigframe __user *frame;
+	compat_stack_t stack;
+	int err = 0;
+
+	frame = compat_get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!frame)
+		return 1;
+
+	err |= copy_siginfo_to_user32(&frame->info, info);
+
+	__put_user_error(0, &frame->sig.uc.uc_flags, err);
+	__put_user_error(NULL, &frame->sig.uc.uc_link, err);
+
+	memset(&stack, 0, sizeof(stack));
+	stack.ss_sp = (compat_uptr_t)current->sas_ss_sp;
+	stack.ss_flags = sas_ss_flags(regs->compat_sp);
+	stack.ss_size = current->sas_ss_size;
+	err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack));
+
+	err |= compat_setup_sigframe(&frame->sig, regs, set);
+	if (err == 0)
+		err = compat_setup_return(regs, ka, frame->sig.retcode, frame,
+					  usig);
+
+	if (err == 0) {
+		regs->regs[1] = (compat_ulong_t)(unsigned long)&frame->info;
+		regs->regs[2] = (compat_ulong_t)(unsigned long)&frame->sig.uc;
+	}
+
+	return err;
+}
+
+int compat_setup_frame(int usig, struct k_sigaction *ka, sigset_t *set,
+		       struct pt_regs *regs)
+{
+	struct compat_sigframe __user *frame;
+	int err = 0;
+
+	frame = compat_get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!frame)
+		return 1;
+
+	__put_user_error(0x5ac3c35a, &frame->uc.uc_flags, err);
+
+	err |= compat_setup_sigframe(frame, regs, set);
+	if (err == 0)
+		err = compat_setup_return(regs, ka, frame->retcode, frame, usig);
+
+	return err;
+}
+
+/*
+ * RT signals don't have generic compat wrappers.
+ * See arch/powerpc/kernel/signal_32.c
+ */
+asmlinkage int compat_sys_rt_sigprocmask(int how, compat_sigset_t __user *set,
+					 compat_sigset_t __user *oset,
+					 compat_size_t sigsetsize)
+{
+	sigset_t s;
+	sigset_t __user *up;
+	int ret;
+	mm_segment_t old_fs = get_fs();
+
+	if (set) {
+		if (get_sigset_t(&s, set))
+			return -EFAULT;
+	}
+
+	set_fs(KERNEL_DS);
+	/* This is valid because of the set_fs() */
+	up = (sigset_t __user *) &s;
+	ret = sys_rt_sigprocmask(how, set ? up : NULL, oset ? up : NULL,
+				 sigsetsize);
+	set_fs(old_fs);
+	if (ret)
+		return ret;
+	if (oset) {
+		if (put_sigset_t(oset, &s))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+asmlinkage int compat_sys_rt_sigpending(compat_sigset_t __user *set,
+					compat_size_t sigsetsize)
+{
+	sigset_t s;
+	int ret;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	/* The __user pointer cast is valid because of the set_fs() */
+	ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
+	set_fs(old_fs);
+	if (!ret) {
+		if (put_sigset_t(set, &s))
+			return -EFAULT;
+	}
+	return ret;
+}
+
+asmlinkage int compat_sys_rt_sigqueueinfo(int pid, int sig,
+					  compat_siginfo_t __user *uinfo)
+{
+	siginfo_t info;
+	int ret;
+	mm_segment_t old_fs = get_fs();
+
+	ret = copy_siginfo_from_user32(&info, uinfo);
+	if (unlikely(ret))
+		return ret;
+
+	set_fs (KERNEL_DS);
+	/* The __user pointer cast is valid because of the set_fs() */
+	ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
+	set_fs (old_fs);
+	return ret;
+}
+
+void compat_setup_restart_syscall(struct pt_regs *regs)
+{
+       regs->regs[7] = __NR_restart_syscall;
+}
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
new file mode 100644
index 000000000000..b711525be21f
--- /dev/null
+++ b/arch/arm64/kernel/smp.c
@@ -0,0 +1,469 @@
+/*
+ * SMP initialisation and IPI support
+ * Based on arch/arm/kernel/smp.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/cache.h>
+#include <linux/profile.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/err.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+
+#include <asm/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/ptrace.h>
+#include <asm/mmu_context.h>
+
+/*
+ * as from 2.5, kernels no longer have an init_tasks structure
+ * so we need some other way of telling a new secondary core
+ * where to place its SVC stack
+ */
+struct secondary_data secondary_data;
+volatile unsigned long secondary_holding_pen_release = -1;
+
+enum ipi_msg_type {
+	IPI_RESCHEDULE,
+	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
+	IPI_CPU_STOP,
+};
+
+static DEFINE_RAW_SPINLOCK(boot_lock);
+
+/*
+ * Write secondary_holding_pen_release in a way that is guaranteed to be
+ * visible to all observers, irrespective of whether they're taking part
+ * in coherency or not.  This is necessary for the hotplug code to work
+ * reliably.
+ */
+static void __cpuinit write_pen_release(int val)
+{
+	void *start = (void *)&secondary_holding_pen_release;
+	unsigned long size = sizeof(secondary_holding_pen_release);
+
+	secondary_holding_pen_release = val;
+	__flush_dcache_area(start, size);
+}
+
+/*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+static int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	raw_spin_lock(&boot_lock);
+
+	/*
+	 * Update the pen release flag.
+	 */
+	write_pen_release(cpu);
+
+	/*
+	 * Send an event, causing the secondaries to read pen_release.
+	 */
+	sev();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (secondary_holding_pen_release == -1UL)
+			break;
+		udelay(10);
+	}
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	raw_spin_unlock(&boot_lock);
+
+	return secondary_holding_pen_release != -1 ? -ENOSYS : 0;
+}
+
+static DECLARE_COMPLETION(cpu_running);
+
+int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
+{
+	int ret;
+
+	/*
+	 * We need to tell the secondary core where to find its stack and the
+	 * page tables.
+	 */
+	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
+	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
+
+	/*
+	 * Now bring the CPU into our world.
+	 */
+	ret = boot_secondary(cpu, idle);
+	if (ret == 0) {
+		/*
+		 * CPU was successfully started, wait for it to come online or
+		 * time out.
+		 */
+		wait_for_completion_timeout(&cpu_running,
+					    msecs_to_jiffies(1000));
+
+		if (!cpu_online(cpu)) {
+			pr_crit("CPU%u: failed to come online\n", cpu);
+			ret = -EIO;
+		}
+	} else {
+		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
+	}
+
+	secondary_data.stack = NULL;
+
+	return ret;
+}
+
+/*
+ * This is the secondary CPU boot entry.  We're using this CPUs
+ * idle thread stack, but a set of temporary page tables.
+ */
+asmlinkage void __cpuinit secondary_start_kernel(void)
+{
+	struct mm_struct *mm = &init_mm;
+	unsigned int cpu = smp_processor_id();
+
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
+	/*
+	 * All kernel threads share the same mm context; grab a
+	 * reference and switch to it.
+	 */
+	atomic_inc(&mm->mm_count);
+	current->active_mm = mm;
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
+
+	/*
+	 * TTBR0 is only used for the identity mapping at this stage. Make it
+	 * point to zero page to avoid speculatively fetching new entries.
+	 */
+	cpu_set_reserved_ttbr0();
+	flush_tlb_all();
+
+	preempt_disable();
+	trace_hardirqs_off();
+
+	/*
+	 * Let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	raw_spin_lock(&boot_lock);
+	raw_spin_unlock(&boot_lock);
+
+	/*
+	 * Enable local interrupts.
+	 */
+	notify_cpu_starting(cpu);
+	local_irq_enable();
+	local_fiq_enable();
+
+	/*
+	 * OK, now it's safe to let the boot CPU continue.  Wait for
+	 * the CPU migration code to notice that the CPU is online
+	 * before we continue.
+	 */
+	set_cpu_online(cpu, true);
+	while (!cpu_active(cpu))
+		cpu_relax();
+
+	/*
+	 * OK, it's off to the idle thread for us
+	 */
+	cpu_idle();
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	unsigned long bogosum = loops_per_jiffy * num_online_cpus();
+
+	pr_info("SMP: Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+		num_online_cpus(), bogosum / (500000/HZ),
+		(bogosum / (5000/HZ)) % 100);
+}
+
+void __init smp_prepare_boot_cpu(void)
+{
+}
+
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+static phys_addr_t cpu_release_addr[NR_CPUS];
+
+/*
+ * Enumerate the possible CPU set from the device tree.
+ */
+void __init smp_init_cpus(void)
+{
+	const char *enable_method;
+	struct device_node *dn = NULL;
+	int cpu = 0;
+
+	while ((dn = of_find_node_by_type(dn, "cpu"))) {
+		if (cpu >= NR_CPUS)
+			goto next;
+
+		/*
+		 * We currently support only the "spin-table" enable-method.
+		 */
+		enable_method = of_get_property(dn, "enable-method", NULL);
+		if (!enable_method || strcmp(enable_method, "spin-table")) {
+			pr_err("CPU %d: missing or invalid enable-method property: %s\n",
+			       cpu, enable_method);
+			goto next;
+		}
+
+		/*
+		 * Determine the address from which the CPU is polling.
+		 */
+		if (of_property_read_u64(dn, "cpu-release-addr",
+					 &cpu_release_addr[cpu])) {
+			pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
+			       cpu);
+			goto next;
+		}
+
+		set_cpu_possible(cpu, true);
+next:
+		cpu++;
+	}
+
+	/* sanity check */
+	if (cpu > NR_CPUS)
+		pr_warning("no. of cores (%d) greater than configured maximum of %d - clipping\n",
+			   cpu, NR_CPUS);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	int cpu;
+	void **release_addr;
+	unsigned int ncores = num_possible_cpus();
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map (which describes the set of CPUs
+	 * actually populated at the present time) and release the
+	 * secondaries from the bootloader.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (max_cpus == 0)
+			break;
+
+		if (!cpu_release_addr[cpu])
+			continue;
+
+		release_addr = __va(cpu_release_addr[cpu]);
+		release_addr[0] = (void *)__pa(secondary_holding_pen);
+		__flush_dcache_area(release_addr, sizeof(release_addr[0]));
+
+		set_cpu_present(cpu, true);
+		max_cpus--;
+	}
+
+	/*
+	 * Send an event to wake up the secondaries.
+	 */
+	sev();
+}
+
+
+void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
+{
+	smp_cross_call = fn;
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	smp_cross_call(mask, IPI_CALL_FUNC);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+}
+
+static const char *ipi_types[NR_IPI] = {
+#define S(x,s)	[x - IPI_RESCHEDULE] = s
+	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
+	S(IPI_CALL_FUNC, "Function call interrupts"),
+	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
+	S(IPI_CPU_STOP, "CPU stop interrupts"),
+};
+
+void show_ipi_list(struct seq_file *p, int prec)
+{
+	unsigned int cpu, i;
+
+	for (i = 0; i < NR_IPI; i++) {
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i + IPI_RESCHEDULE,
+			   prec >= 4 ? " " : "");
+		for_each_present_cpu(cpu)
+			seq_printf(p, "%10u ",
+				   __get_irq_stat(cpu, ipi_irqs[i]));
+		seq_printf(p, "      %s\n", ipi_types[i]);
+	}
+}
+
+u64 smp_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = 0;
+	int i;
+
+	for (i = 0; i < NR_IPI; i++)
+		sum += __get_irq_stat(cpu, ipi_irqs[i]);
+
+	return sum;
+}
+
+static DEFINE_RAW_SPINLOCK(stop_lock);
+
+/*
+ * ipi_cpu_stop - handle IPI from smp_send_stop()
+ */
+static void ipi_cpu_stop(unsigned int cpu)
+{
+	if (system_state == SYSTEM_BOOTING ||
+	    system_state == SYSTEM_RUNNING) {
+		raw_spin_lock(&stop_lock);
+		pr_crit("CPU%u: stopping\n", cpu);
+		dump_stack();
+		raw_spin_unlock(&stop_lock);
+	}
+
+	set_cpu_online(cpu, false);
+
+	local_fiq_disable();
+	local_irq_disable();
+
+	while (1)
+		cpu_relax();
+}
+
+/*
+ * Main handler for inter-processor interrupts
+ */
+void handle_IPI(int ipinr, struct pt_regs *regs)
+{
+	unsigned int cpu = smp_processor_id();
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	if (ipinr >= IPI_RESCHEDULE && ipinr < IPI_RESCHEDULE + NR_IPI)
+		__inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_RESCHEDULE]);
+
+	switch (ipinr) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+
+	case IPI_CALL_FUNC:
+		irq_enter();
+		generic_smp_call_function_interrupt();
+		irq_exit();
+		break;
+
+	case IPI_CALL_FUNC_SINGLE:
+		irq_enter();
+		generic_smp_call_function_single_interrupt();
+		irq_exit();
+		break;
+
+	case IPI_CPU_STOP:
+		irq_enter();
+		ipi_cpu_stop(cpu);
+		irq_exit();
+		break;
+
+	default:
+		pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr);
+		break;
+	}
+	set_irq_regs(old_regs);
+}
+
+void smp_send_reschedule(int cpu)
+{
+	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
+}
+
+void smp_send_stop(void)
+{
+	unsigned long timeout;
+
+	if (num_online_cpus() > 1) {
+		cpumask_t mask;
+
+		cpumask_copy(&mask, cpu_online_mask);
+		cpu_clear(smp_processor_id(), mask);
+
+		smp_cross_call(&mask, IPI_CPU_STOP);
+	}
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while (num_online_cpus() > 1 && timeout--)
+		udelay(1);
+
+	if (num_online_cpus() > 1)
+		pr_warning("SMP: failed to stop secondary CPUs\n");
+}
+
+/*
+ * not supported here
+ */
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return -EINVAL;
+}
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
new file mode 100644
index 000000000000..d25459ff57fc
--- /dev/null
+++ b/arch/arm64/kernel/stacktrace.c
@@ -0,0 +1,127 @@
+/*
+ * Stack tracing support
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+
+#include <asm/stacktrace.h>
+
+/*
+ * AArch64 PCS assigns the frame pointer to x29.
+ *
+ * A simple function prologue looks like this:
+ * 	sub	sp, sp, #0x10
+ *   	stp	x29, x30, [sp]
+ *	mov	x29, sp
+ *
+ * A simple function epilogue looks like this:
+ *	mov	sp, x29
+ *	ldp	x29, x30, [sp]
+ *	add	sp, sp, #0x10
+ */
+int unwind_frame(struct stackframe *frame)
+{
+	unsigned long high, low;
+	unsigned long fp = frame->fp;
+
+	low  = frame->sp;
+	high = ALIGN(low, THREAD_SIZE);
+
+	if (fp < low || fp > high || fp & 0xf)
+		return -EINVAL;
+
+	frame->sp = fp + 0x10;
+	frame->fp = *(unsigned long *)(fp);
+	frame->pc = *(unsigned long *)(fp + 8);
+
+	return 0;
+}
+
+void notrace walk_stackframe(struct stackframe *frame,
+		     int (*fn)(struct stackframe *, void *), void *data)
+{
+	while (1) {
+		int ret;
+
+		if (fn(frame, data))
+			break;
+		ret = unwind_frame(frame);
+		if (ret < 0)
+			break;
+	}
+}
+EXPORT_SYMBOL(walk_stackframe);
+
+#ifdef CONFIG_STACKTRACE
+struct stack_trace_data {
+	struct stack_trace *trace;
+	unsigned int no_sched_functions;
+	unsigned int skip;
+};
+
+static int save_trace(struct stackframe *frame, void *d)
+{
+	struct stack_trace_data *data = d;
+	struct stack_trace *trace = data->trace;
+	unsigned long addr = frame->pc;
+
+	if (data->no_sched_functions && in_sched_functions(addr))
+		return 0;
+	if (data->skip) {
+		data->skip--;
+		return 0;
+	}
+
+	trace->entries[trace->nr_entries++] = addr;
+
+	return trace->nr_entries >= trace->max_entries;
+}
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	struct stack_trace_data data;
+	struct stackframe frame;
+
+	data.trace = trace;
+	data.skip = trace->skip;
+
+	if (tsk != current) {
+		data.no_sched_functions = 1;
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		frame.pc = thread_saved_pc(tsk);
+	} else {
+		register unsigned long current_sp asm("sp");
+		data.no_sched_functions = 0;
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.pc = (unsigned long)save_stack_trace_tsk;
+	}
+
+	walk_stackframe(&frame, save_trace, &data);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(current, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+#endif
diff --git a/arch/arm64/kernel/sys.c b/arch/arm64/kernel/sys.c
new file mode 100644
index 000000000000..905fcfb0ddd0
--- /dev/null
+++ b/arch/arm64/kernel/sys.c
@@ -0,0 +1,138 @@
+/*
+ * AArch64-specific system calls implementation
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+
+/*
+ * Clone a task - this clones the calling program thread.
+ */
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+			  int __user *parent_tidptr, unsigned long tls_val,
+			  int __user *child_tidptr, struct pt_regs *regs)
+{
+	if (!newsp)
+		newsp = regs->sp;
+	/* 16-byte aligned stack mandatory on AArch64 */
+	if (newsp & 15)
+		return -EINVAL;
+	return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage long sys_execve(const char __user *filenamei,
+			   const char __user *const __user *argv,
+			   const char __user *const __user *envp,
+			   struct pt_regs *regs)
+{
+	long error;
+	char * filename;
+
+	filename = getname(filenamei);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	error = do_execve(filename, argv, envp, regs);
+	putname(filename);
+out:
+	return error;
+}
+
+int kernel_execve(const char *filename,
+		  const char *const argv[],
+		  const char *const envp[])
+{
+	struct pt_regs regs;
+	int ret;
+
+	memset(&regs, 0, sizeof(struct pt_regs));
+	ret = do_execve(filename,
+			(const char __user *const __user *)argv,
+			(const char __user *const __user *)envp, &regs);
+	if (ret < 0)
+		goto out;
+
+	/*
+	 * Save argc to the register structure for userspace.
+	 */
+	regs.regs[0] = ret;
+
+	/*
+	 * We were successful.  We won't be returning to our caller, but
+	 * instead to user space by manipulating the kernel stack.
+	 */
+	asm(	"add	x0, %0, %1\n\t"
+		"mov	x1, %2\n\t"
+		"mov	x2, %3\n\t"
+		"bl	memmove\n\t"	/* copy regs to top of stack */
+		"mov	x27, #0\n\t"	/* not a syscall */
+		"mov	x28, %0\n\t"	/* thread structure */
+		"mov	sp, x0\n\t"	/* reposition stack pointer */
+		"b	ret_to_user"
+		:
+		: "r" (current_thread_info()),
+		  "Ir" (THREAD_START_SP - sizeof(regs)),
+		  "r" (&regs),
+		  "Ir" (sizeof(regs))
+		: "x0", "x1", "x2", "x27", "x28", "x30", "memory");
+
+ out:
+	return ret;
+}
+EXPORT_SYMBOL(kernel_execve);
+
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+			 unsigned long prot, unsigned long flags,
+			 unsigned long fd, off_t off)
+{
+	if (offset_in_page(off) != 0)
+		return -EINVAL;
+
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
+}
+
+/*
+ * Wrappers to pass the pt_regs argument.
+ */
+#define sys_execve		sys_execve_wrapper
+#define sys_clone		sys_clone_wrapper
+#define sys_rt_sigreturn	sys_rt_sigreturn_wrapper
+#define sys_sigaltstack		sys_sigaltstack_wrapper
+
+#include <asm/syscalls.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym)	[nr] = sym,
+
+/*
+ * The sys_call_table array must be 4K aligned to be accessible from
+ * kernel/entry.S.
+ */
+void *sys_call_table[__NR_syscalls] __aligned(4096) = {
+	[0 ... __NR_syscalls - 1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/arm64/kernel/sys32.S b/arch/arm64/kernel/sys32.S
new file mode 100644
index 000000000000..5e4dc93cc31f
--- /dev/null
+++ b/arch/arm64/kernel/sys32.S
@@ -0,0 +1,282 @@
+/*
+ * Compat system call wrappers
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Authors: Will Deacon <will.deacon@arm.com>
+ *	    Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * System call wrappers for the AArch32 compatibility layer.
+ */
+compat_sys_fork_wrapper:
+	mov	x0, sp
+	b	compat_sys_fork
+ENDPROC(compat_sys_fork_wrapper)
+
+compat_sys_vfork_wrapper:
+	mov	x0, sp
+	b	compat_sys_vfork
+ENDPROC(compat_sys_vfork_wrapper)
+
+compat_sys_execve_wrapper:
+	mov	x3, sp
+	b	compat_sys_execve
+ENDPROC(compat_sys_execve_wrapper)
+
+compat_sys_clone_wrapper:
+	mov	x5, sp
+	b	compat_sys_clone
+ENDPROC(compat_sys_clone_wrapper)
+
+compat_sys_sigreturn_wrapper:
+	mov	x0, sp
+	mov	x27, #0		// prevent syscall restart handling (why)
+	b	compat_sys_sigreturn
+ENDPROC(compat_sys_sigreturn_wrapper)
+
+compat_sys_rt_sigreturn_wrapper:
+	mov	x0, sp
+	mov	x27, #0		// prevent syscall restart handling (why)
+	b	compat_sys_rt_sigreturn
+ENDPROC(compat_sys_rt_sigreturn_wrapper)
+
+compat_sys_sigaltstack_wrapper:
+	ldr	x2, [sp, #S_COMPAT_SP]
+	b	compat_do_sigaltstack
+ENDPROC(compat_sys_sigaltstack_wrapper)
+
+compat_sys_statfs64_wrapper:
+	mov	w3, #84
+	cmp	w1, #88
+	csel	w1, w3, w1, eq
+	b	compat_sys_statfs64
+ENDPROC(compat_sys_statfs64_wrapper)
+
+compat_sys_fstatfs64_wrapper:
+	mov	w3, #84
+	cmp	w1, #88
+	csel	w1, w3, w1, eq
+	b	compat_sys_fstatfs64
+ENDPROC(compat_sys_fstatfs64_wrapper)
+
+/*
+ * Wrappers for AArch32 syscalls that either take 64-bit parameters
+ * in registers or that take 32-bit parameters which require sign
+ * extension.
+ */
+compat_sys_lseek_wrapper:
+	sxtw	x1, w1
+	b	sys_lseek
+ENDPROC(compat_sys_lseek_wrapper)
+
+compat_sys_pread64_wrapper:
+	orr	x3, x4, x5, lsl #32
+	b	sys_pread64
+ENDPROC(compat_sys_pread64_wrapper)
+
+compat_sys_pwrite64_wrapper:
+	orr	x3, x4, x5, lsl #32
+	b	sys_pwrite64
+ENDPROC(compat_sys_pwrite64_wrapper)
+
+compat_sys_truncate64_wrapper:
+	orr	x1, x2, x3, lsl #32
+	b	sys_truncate
+ENDPROC(compat_sys_truncate64_wrapper)
+
+compat_sys_ftruncate64_wrapper:
+	orr	x1, x2, x3, lsl #32
+	b	sys_ftruncate
+ENDPROC(compat_sys_ftruncate64_wrapper)
+
+compat_sys_readahead_wrapper:
+	orr	x1, x2, x3, lsl #32
+	mov	w2, w4
+	b	sys_readahead
+ENDPROC(compat_sys_readahead_wrapper)
+
+compat_sys_lookup_dcookie:
+	orr	x0, x0, x1, lsl #32
+	mov	w1, w2
+	mov	w2, w3
+	b	sys_lookup_dcookie
+ENDPROC(compat_sys_lookup_dcookie)
+
+compat_sys_fadvise64_64_wrapper:
+	mov	w6, w1
+	orr	x1, x2, x3, lsl #32
+	orr	x2, x4, x5, lsl #32
+	mov	w3, w6
+	b	sys_fadvise64_64
+ENDPROC(compat_sys_fadvise64_64_wrapper)
+
+compat_sys_sync_file_range2_wrapper:
+	orr	x2, x2, x3, lsl #32
+	orr	x3, x4, x5, lsl #32
+	b	sys_sync_file_range2
+ENDPROC(compat_sys_sync_file_range2_wrapper)
+
+compat_sys_fallocate_wrapper:
+	orr	x2, x2, x3, lsl #32
+	orr	x3, x4, x5, lsl #32
+	b	sys_fallocate
+ENDPROC(compat_sys_fallocate_wrapper)
+
+compat_sys_fanotify_mark_wrapper:
+	orr	x2, x2, x3, lsl #32
+	mov	w3, w4
+	mov	w4, w5
+	b	sys_fanotify_mark
+ENDPROC(compat_sys_fanotify_mark_wrapper)
+
+/*
+ * Use the compat system call wrappers.
+ */
+#define sys_fork		compat_sys_fork_wrapper
+#define sys_open		compat_sys_open
+#define sys_execve		compat_sys_execve_wrapper
+#define sys_lseek		compat_sys_lseek_wrapper
+#define sys_mount		compat_sys_mount
+#define sys_ptrace		compat_sys_ptrace
+#define sys_times		compat_sys_times
+#define sys_ioctl		compat_sys_ioctl
+#define sys_fcntl		compat_sys_fcntl
+#define sys_ustat		compat_sys_ustat
+#define sys_sigaction		compat_sys_sigaction
+#define sys_sigsuspend		compat_sys_sigsuspend
+#define sys_sigpending		compat_sys_sigpending
+#define sys_setrlimit		compat_sys_setrlimit
+#define sys_getrusage		compat_sys_getrusage
+#define sys_gettimeofday	compat_sys_gettimeofday
+#define sys_settimeofday	compat_sys_settimeofday
+#define sys_statfs		compat_sys_statfs
+#define sys_fstatfs		compat_sys_fstatfs
+#define sys_setitimer		compat_sys_setitimer
+#define sys_getitimer		compat_sys_getitimer
+#define sys_newstat		compat_sys_newstat
+#define sys_newlstat		compat_sys_newlstat
+#define sys_newfstat		compat_sys_newfstat
+#define sys_wait4		compat_sys_wait4
+#define sys_sysinfo		compat_sys_sysinfo
+#define sys_sigreturn		compat_sys_sigreturn_wrapper
+#define sys_clone		compat_sys_clone_wrapper
+#define sys_adjtimex		compat_sys_adjtimex
+#define sys_sigprocmask		compat_sys_sigprocmask
+#define sys_getdents		compat_sys_getdents
+#define sys_select		compat_sys_select
+#define sys_readv		compat_sys_readv
+#define sys_writev		compat_sys_writev
+#define sys_sysctl		compat_sys_sysctl
+#define sys_sched_rr_get_interval compat_sys_sched_rr_get_interval
+#define sys_nanosleep		compat_sys_nanosleep
+#define sys_rt_sigreturn	compat_sys_rt_sigreturn_wrapper
+#define sys_rt_sigaction	compat_sys_rt_sigaction
+#define sys_rt_sigprocmask	compat_sys_rt_sigprocmask
+#define sys_rt_sigpending	compat_sys_rt_sigpending
+#define sys_rt_sigtimedwait	compat_sys_rt_sigtimedwait
+#define sys_rt_sigqueueinfo	compat_sys_rt_sigqueueinfo
+#define sys_rt_sigsuspend	compat_sys_rt_sigsuspend
+#define sys_pread64		compat_sys_pread64_wrapper
+#define sys_pwrite64		compat_sys_pwrite64_wrapper
+#define sys_sigaltstack		compat_sys_sigaltstack_wrapper
+#define sys_sendfile		compat_sys_sendfile
+#define sys_vfork		compat_sys_vfork_wrapper
+#define sys_getrlimit		compat_sys_getrlimit
+#define sys_mmap2		sys_mmap_pgoff
+#define sys_truncate64		compat_sys_truncate64_wrapper
+#define sys_ftruncate64		compat_sys_ftruncate64_wrapper
+#define sys_getdents64		compat_sys_getdents64
+#define sys_fcntl64		compat_sys_fcntl64
+#define sys_readahead		compat_sys_readahead_wrapper
+#define sys_futex		compat_sys_futex
+#define sys_sched_setaffinity	compat_sys_sched_setaffinity
+#define sys_sched_getaffinity	compat_sys_sched_getaffinity
+#define sys_io_setup		compat_sys_io_setup
+#define sys_io_getevents	compat_sys_io_getevents
+#define sys_io_submit		compat_sys_io_submit
+#define sys_lookup_dcookie	compat_sys_lookup_dcookie
+#define sys_timer_create	compat_sys_timer_create
+#define sys_timer_settime	compat_sys_timer_settime
+#define sys_timer_gettime	compat_sys_timer_gettime
+#define sys_clock_settime	compat_sys_clock_settime
+#define sys_clock_gettime	compat_sys_clock_gettime
+#define sys_clock_getres	compat_sys_clock_getres
+#define sys_clock_nanosleep	compat_sys_clock_nanosleep
+#define sys_statfs64		compat_sys_statfs64_wrapper
+#define sys_fstatfs64		compat_sys_fstatfs64_wrapper
+#define sys_utimes		compat_sys_utimes
+#define sys_fadvise64_64	compat_sys_fadvise64_64_wrapper
+#define sys_mq_open		compat_sys_mq_open
+#define sys_mq_timedsend	compat_sys_mq_timedsend
+#define sys_mq_timedreceive	compat_sys_mq_timedreceive
+#define sys_mq_notify		compat_sys_mq_notify
+#define sys_mq_getsetattr	compat_sys_mq_getsetattr
+#define sys_waitid		compat_sys_waitid
+#define sys_recv		compat_sys_recv
+#define sys_recvfrom		compat_sys_recvfrom
+#define sys_setsockopt		compat_sys_setsockopt
+#define sys_getsockopt		compat_sys_getsockopt
+#define sys_sendmsg		compat_sys_sendmsg
+#define sys_recvmsg		compat_sys_recvmsg
+#define sys_semctl		compat_sys_semctl
+#define sys_msgsnd		compat_sys_msgsnd
+#define sys_msgrcv		compat_sys_msgrcv
+#define sys_msgctl		compat_sys_msgctl
+#define sys_shmat		compat_sys_shmat
+#define sys_shmctl		compat_sys_shmctl
+#define sys_keyctl		compat_sys_keyctl
+#define sys_semtimedop		compat_sys_semtimedop
+#define sys_mbind		compat_sys_mbind
+#define sys_get_mempolicy	compat_sys_get_mempolicy
+#define sys_set_mempolicy	compat_sys_set_mempolicy
+#define sys_openat		compat_sys_openat
+#define sys_futimesat		compat_sys_futimesat
+#define sys_pselect6		compat_sys_pselect6
+#define sys_ppoll		compat_sys_ppoll
+#define sys_set_robust_list	compat_sys_set_robust_list
+#define sys_get_robust_list	compat_sys_get_robust_list
+#define sys_sync_file_range2	compat_sys_sync_file_range2_wrapper
+#define sys_vmsplice		compat_sys_vmsplice
+#define sys_move_pages		compat_sys_move_pages
+#define sys_epoll_pwait		compat_sys_epoll_pwait
+#define sys_kexec_load		compat_sys_kexec_load
+#define sys_utimensat		compat_sys_utimensat
+#define sys_signalfd		compat_sys_signalfd
+#define sys_fallocate		compat_sys_fallocate_wrapper
+#define sys_timerfd_settime	compat_sys_timerfd_settime
+#define sys_timerfd_gettime	compat_sys_timerfd_gettime
+#define sys_signalfd4		compat_sys_signalfd4
+#define sys_preadv		compat_sys_preadv
+#define sys_pwritev		compat_sys_pwritev
+#define sys_rt_tgsigqueueinfo	compat_sys_rt_tgsigqueueinfo
+#define sys_recvmmsg		compat_sys_recvmmsg
+#define sys_fanotify_mark	compat_sys_fanotify_mark_wrapper
+
+#undef __SYSCALL
+#define __SYSCALL(x, y)		.quad	y	// x
+#define __SYSCALL_COMPAT
+
+/*
+ * The system calls table must be 4KB aligned.
+ */
+	.align	12
+ENTRY(compat_sys_call_table)
+#include <asm/unistd.h>
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
new file mode 100644
index 000000000000..967e92fdff01
--- /dev/null
+++ b/arch/arm64/kernel/sys_compat.c
@@ -0,0 +1,164 @@
+/*
+ * Based on arch/arm/kernel/sys_arm.c
+ *
+ * Copyright (C) People who wrote linux/arch/i386/kernel/sys_i386.c
+ * Copyright (C) 1995, 1996 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define __SYSCALL_COMPAT
+
+#include <linux/compat.h>
+#include <linux/personality.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/unistd.h>
+
+asmlinkage int compat_sys_fork(struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, regs->compat_sp, regs, 0, NULL, NULL);
+}
+
+asmlinkage int compat_sys_clone(unsigned long clone_flags, unsigned long newsp,
+			  int __user *parent_tidptr, int tls_val,
+			  int __user *child_tidptr, struct pt_regs *regs)
+{
+	if (!newsp)
+		newsp = regs->compat_sp;
+
+	return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
+}
+
+asmlinkage int compat_sys_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->compat_sp,
+		       regs, 0, NULL, NULL);
+}
+
+asmlinkage int compat_sys_execve(const char __user *filenamei,
+				 compat_uptr_t argv, compat_uptr_t envp,
+				 struct pt_regs *regs)
+{
+	int error;
+	char * filename;
+
+	filename = getname(filenamei);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	error = compat_do_execve(filename, compat_ptr(argv), compat_ptr(envp),
+				 regs);
+	putname(filename);
+out:
+	return error;
+}
+
+asmlinkage int compat_sys_sched_rr_get_interval(compat_pid_t pid,
+						struct compat_timespec __user *interval)
+{
+	struct timespec t;
+	int ret;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t);
+	set_fs(old_fs);
+	if (put_compat_timespec(&t, interval))
+		return -EFAULT;
+	return ret;
+}
+
+asmlinkage int compat_sys_sendfile(int out_fd, int in_fd,
+				   compat_off_t __user *offset, s32 count)
+{
+	mm_segment_t old_fs = get_fs();
+	int ret;
+	off_t of;
+
+	if (offset && get_user(of, offset))
+		return -EFAULT;
+
+	set_fs(KERNEL_DS);
+	ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL,
+			   count);
+	set_fs(old_fs);
+
+	if (offset && put_user(of, offset))
+		return -EFAULT;
+	return ret;
+}
+
+static inline void
+do_compat_cache_op(unsigned long start, unsigned long end, int flags)
+{
+	struct mm_struct *mm = current->active_mm;
+	struct vm_area_struct *vma;
+
+	if (end < start || flags)
+		return;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, start);
+	if (vma && vma->vm_start < end) {
+		if (start < vma->vm_start)
+			start = vma->vm_start;
+		if (end > vma->vm_end)
+			end = vma->vm_end;
+		up_read(&mm->mmap_sem);
+		__flush_cache_user_range(start & PAGE_MASK, PAGE_ALIGN(end));
+		return;
+	}
+	up_read(&mm->mmap_sem);
+}
+
+/*
+ * Handle all unrecognised system calls.
+ */
+long compat_arm_syscall(struct pt_regs *regs)
+{
+	unsigned int no = regs->regs[7];
+
+	switch (no) {
+	/*
+	 * Flush a region from virtual address 'r0' to virtual address 'r1'
+	 * _exclusive_.  There is no alignment requirement on either address;
+	 * user space does not need to know the hardware cache layout.
+	 *
+	 * r2 contains flags.  It should ALWAYS be passed as ZERO until it
+	 * is defined to be something else.  For now we ignore it, but may
+	 * the fires of hell burn in your belly if you break this rule. ;)
+	 *
+	 * (at a later date, we may want to allow this call to not flush
+	 * various aspects of the cache.  Passing '0' will guarantee that
+	 * everything necessary gets flushed to maintain consistency in
+	 * the specified region).
+	 */
+	case __ARM_NR_compat_cacheflush:
+		do_compat_cache_op(regs->regs[0], regs->regs[1], regs->regs[2]);
+		return 0;
+
+	case __ARM_NR_compat_set_tls:
+		current->thread.tp_value = regs->regs[0];
+		asm ("msr tpidrro_el0, %0" : : "r" (regs->regs[0]));
+		return 0;
+
+	default:
+		return -ENOSYS;
+	}
+}
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
new file mode 100644
index 000000000000..3b4b7258f492
--- /dev/null
+++ b/arch/arm64/kernel/time.c
@@ -0,0 +1,65 @@
+/*
+ * Based on arch/arm/kernel/time.c
+ *
+ * Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ * Modifications for ARM (C) 1994-2001 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/profile.h>
+#include <linux/syscore_ops.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
+
+#include <clocksource/arm_generic.h>
+
+#include <asm/thread_info.h>
+#include <asm/stacktrace.h>
+
+#ifdef CONFIG_SMP
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	struct stackframe frame;
+
+	if (!in_lock_functions(regs->pc))
+		return regs->pc;
+
+	frame.fp = regs->regs[29];
+	frame.sp = regs->sp;
+	frame.pc = regs->pc;
+	do {
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
+			return 0;
+	} while (in_lock_functions(frame.pc));
+
+	return frame.pc;
+}
+EXPORT_SYMBOL(profile_pc);
+#endif
+
+void __init time_init(void)
+{
+	arm_generic_timer_init();
+}
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
new file mode 100644
index 000000000000..3883f842434f
--- /dev/null
+++ b/arch/arm64/kernel/traps.c
@@ -0,0 +1,348 @@
+/*
+ * Based on arch/arm/kernel/traps.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/kallsyms.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+
+#include <asm/atomic.h>
+#include <asm/traps.h>
+#include <asm/stacktrace.h>
+#include <asm/exception.h>
+#include <asm/system_misc.h>
+
+static const char *handler[]= {
+	"Synchronous Abort",
+	"IRQ",
+	"FIQ",
+	"Error"
+};
+
+int show_unhandled_signals = 1;
+
+/*
+ * Dump out the contents of some memory nicely...
+ */
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
+{
+	unsigned long first;
+	mm_segment_t fs;
+	int i;
+
+	/*
+	 * We need to switch to kernel mode so that we can use __get_user
+	 * to safely read from kernel space.  Note that we now dump the
+	 * code first, just in case the backtrace kills us.
+	 */
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	printk("%s%s(0x%016lx to 0x%016lx)\n", lvl, str, bottom, top);
+
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
+
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
+
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned int val;
+				if (__get_user(val, (unsigned int *)p) == 0)
+					sprintf(str + i * 9, " %08x", val);
+				else
+					sprintf(str + i * 9, " ????????");
+			}
+		}
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
+	}
+
+	set_fs(fs);
+}
+
+static void dump_backtrace_entry(unsigned long where, unsigned long stack)
+{
+	print_ip_sym(where);
+	if (in_exception_text(where))
+		dump_mem("", "Exception stack", stack,
+			 stack + sizeof(struct pt_regs));
+}
+
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+	unsigned long addr = instruction_pointer(regs);
+	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
+	int i;
+
+	/*
+	 * We need to switch to kernel mode so that we can use __get_user
+	 * to safely read from kernel space.  Note that we now dump the
+	 * code first, just in case the backtrace kills us.
+	 */
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	for (i = -4; i < 1; i++) {
+		unsigned int val, bad;
+
+		bad = __get_user(val, &((u32 *)addr)[i]);
+
+		if (!bad)
+			p += sprintf(p, i == 0 ? "(%08x) " : "%08x ", val);
+		else {
+			p += sprintf(p, "bad PC value");
+			break;
+		}
+	}
+	printk("%sCode: %s\n", lvl, str);
+
+	set_fs(fs);
+}
+
+static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+	struct stackframe frame;
+	const register unsigned long current_sp asm ("sp");
+
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (!tsk)
+		tsk = current;
+
+	if (regs) {
+		frame.fp = regs->regs[29];
+		frame.sp = regs->sp;
+		frame.pc = regs->pc;
+	} else if (tsk == current) {
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.pc = (unsigned long)dump_backtrace;
+	} else {
+		/*
+		 * task blocked in __switch_to
+		 */
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		frame.pc = thread_saved_pc(tsk);
+	}
+
+	printk("Call trace:\n");
+	while (1) {
+		unsigned long where = frame.pc;
+		int ret;
+
+		ret = unwind_frame(&frame);
+		if (ret < 0)
+			break;
+		dump_backtrace_entry(where, frame.sp);
+	}
+}
+
+void dump_stack(void)
+{
+	dump_backtrace(NULL, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_stack(struct task_struct *tsk, unsigned long *sp)
+{
+	dump_backtrace(NULL, tsk);
+	barrier();
+}
+
+#ifdef CONFIG_PREEMPT
+#define S_PREEMPT " PREEMPT"
+#else
+#define S_PREEMPT ""
+#endif
+#ifdef CONFIG_SMP
+#define S_SMP " SMP"
+#else
+#define S_SMP ""
+#endif
+
+static int __die(const char *str, int err, struct thread_info *thread,
+		 struct pt_regs *regs)
+{
+	struct task_struct *tsk = thread->task;
+	static int die_counter;
+	int ret;
+
+	pr_emerg("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+		 str, err, ++die_counter);
+
+	/* trap and error numbers are mostly meaningless on ARM */
+	ret = notify_die(DIE_OOPS, str, regs, err, 0, SIGSEGV);
+	if (ret == NOTIFY_STOP)
+		return ret;
+
+	print_modules();
+	__show_regs(regs);
+	pr_emerg("Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		 TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
+
+	if (!user_mode(regs) || in_interrupt()) {
+		dump_mem(KERN_EMERG, "Stack: ", regs->sp,
+			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
+		dump_backtrace(regs, tsk);
+		dump_instr(KERN_EMERG, regs);
+	}
+
+	return ret;
+}
+
+static DEFINE_RAW_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+void die(const char *str, struct pt_regs *regs, int err)
+{
+	struct thread_info *thread = current_thread_info();
+	int ret;
+
+	oops_enter();
+
+	raw_spin_lock_irq(&die_lock);
+	console_verbose();
+	bust_spinlocks(1);
+	ret = __die(str, err, thread, regs);
+
+	if (regs && kexec_should_crash(thread->task))
+		crash_kexec(regs);
+
+	bust_spinlocks(0);
+	add_taint(TAINT_DIE);
+	raw_spin_unlock_irq(&die_lock);
+	oops_exit();
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+	if (panic_on_oops)
+		panic("Fatal exception");
+	if (ret != NOTIFY_STOP)
+		do_exit(SIGSEGV);
+}
+
+void arm64_notify_die(const char *str, struct pt_regs *regs,
+		      struct siginfo *info, int err)
+{
+	if (user_mode(regs))
+		force_sig_info(info->si_signo, info, current);
+	else
+		die(str, regs, err);
+}
+
+asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
+{
+	siginfo_t info;
+	void __user *pc = (void __user *)instruction_pointer(regs);
+
+#ifdef CONFIG_COMPAT
+	/* check for AArch32 breakpoint instructions */
+	if (compat_user_mode(regs) && aarch32_break_trap(regs) == 0)
+		return;
+#endif
+
+	if (show_unhandled_signals) {
+		pr_info("%s[%d]: undefined instruction: pc=%p\n",
+			current->comm, task_pid_nr(current), pc);
+		dump_instr(KERN_INFO, regs);
+	}
+
+	info.si_signo = SIGILL;
+	info.si_errno = 0;
+	info.si_code  = ILL_ILLOPC;
+	info.si_addr  = pc;
+
+	arm64_notify_die("Oops - undefined instruction", regs, &info, 0);
+}
+
+long compat_arm_syscall(struct pt_regs *regs);
+
+asmlinkage long do_ni_syscall(struct pt_regs *regs)
+{
+#ifdef CONFIG_COMPAT
+	long ret;
+	if (is_compat_task()) {
+		ret = compat_arm_syscall(regs);
+		if (ret != -ENOSYS)
+			return ret;
+	}
+#endif
+
+	if (show_unhandled_signals) {
+		pr_info("%s[%d]: syscall %d\n", current->comm,
+			task_pid_nr(current), (int)regs->syscallno);
+		dump_instr("", regs);
+		if (user_mode(regs))
+			__show_regs(regs);
+	}
+
+	return sys_ni_syscall();
+}
+
+/*
+ * bad_mode handles the impossible case in the exception vector.
+ */
+asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
+{
+	console_verbose();
+
+	pr_crit("Bad mode in %s handler detected, code 0x%08x\n",
+		handler[reason], esr);
+
+	die("Oops - bad mode", regs, 0);
+	local_irq_disable();
+	panic("bad mode");
+}
+
+void __pte_error(const char *file, int line, unsigned long val)
+{
+	printk("%s:%d: bad pte %016lx.\n", file, line, val);
+}
+
+void __pmd_error(const char *file, int line, unsigned long val)
+{
+	printk("%s:%d: bad pmd %016lx.\n", file, line, val);
+}
+
+void __pgd_error(const char *file, int line, unsigned long val)
+{
+	printk("%s:%d: bad pgd %016lx.\n", file, line, val);
+}
+
+void __init trap_init(void)
+{
+	return;
+}
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
new file mode 100644
index 000000000000..17948fc7d663
--- /dev/null
+++ b/arch/arm64/kernel/vdso.c
@@ -0,0 +1,261 @@
+/*
+ * VDSO implementation for AArch64 and vector page setup for AArch32.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/elf.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/signal32.h>
+#include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
+
+extern char vdso_start, vdso_end;
+static unsigned long vdso_pages;
+static struct page **vdso_pagelist;
+
+/*
+ * The vDSO data page.
+ */
+static union {
+	struct vdso_data	data;
+	u8			page[PAGE_SIZE];
+} vdso_data_store __page_aligned_data;
+struct vdso_data *vdso_data = &vdso_data_store.data;
+
+#ifdef CONFIG_COMPAT
+/*
+ * Create and map the vectors page for AArch32 tasks.
+ */
+static struct page *vectors_page[1];
+
+static int alloc_vectors_page(void)
+{
+	extern char __kuser_helper_start[], __kuser_helper_end[];
+	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+	unsigned long vpage;
+
+	vpage = get_zeroed_page(GFP_ATOMIC);
+
+	if (!vpage)
+		return -ENOMEM;
+
+	/* kuser helpers */
+	memcpy((void *)vpage + 0x1000 - kuser_sz, __kuser_helper_start,
+		kuser_sz);
+
+	/* sigreturn code */
+	memcpy((void *)vpage + AARCH32_KERN_SIGRET_CODE_OFFSET,
+		aarch32_sigret_code, sizeof(aarch32_sigret_code));
+
+	flush_icache_range(vpage, vpage + PAGE_SIZE);
+	vectors_page[0] = virt_to_page(vpage);
+
+	return 0;
+}
+arch_initcall(alloc_vectors_page);
+
+int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr = AARCH32_VECTORS_BASE;
+	int ret;
+
+	down_write(&mm->mmap_sem);
+	current->mm->context.vdso = (void *)addr;
+
+	/* Map vectors page at the high address. */
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+				      VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC,
+				      vectors_page);
+
+	up_write(&mm->mmap_sem);
+
+	return ret;
+}
+#endif /* CONFIG_COMPAT */
+
+static int __init vdso_init(void)
+{
+	struct page *pg;
+	char *vbase;
+	int i, ret = 0;
+
+	vdso_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT;
+	pr_info("vdso: %ld pages (%ld code, %ld data) at base %p\n",
+		vdso_pages + 1, vdso_pages, 1L, &vdso_start);
+
+	/* Allocate the vDSO pagelist, plus a page for the data. */
+	vdso_pagelist = kzalloc(sizeof(struct page *) * (vdso_pages + 1),
+				GFP_KERNEL);
+	if (vdso_pagelist == NULL) {
+		pr_err("Failed to allocate vDSO pagelist!\n");
+		return -ENOMEM;
+	}
+
+	/* Grab the vDSO code pages. */
+	for (i = 0; i < vdso_pages; i++) {
+		pg = virt_to_page(&vdso_start + i*PAGE_SIZE);
+		ClearPageReserved(pg);
+		get_page(pg);
+		vdso_pagelist[i] = pg;
+	}
+
+	/* Sanity check the shared object header. */
+	vbase = vmap(vdso_pagelist, 1, 0, PAGE_KERNEL);
+	if (vbase == NULL) {
+		pr_err("Failed to map vDSO pagelist!\n");
+		return -ENOMEM;
+	} else if (memcmp(vbase, "\177ELF", 4)) {
+		pr_err("vDSO is not a valid ELF object!\n");
+		ret = -EINVAL;
+		goto unmap;
+	}
+
+	/* Grab the vDSO data page. */
+	pg = virt_to_page(vdso_data);
+	get_page(pg);
+	vdso_pagelist[i] = pg;
+
+unmap:
+	vunmap(vbase);
+	return ret;
+}
+arch_initcall(vdso_init);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+				int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long vdso_base, vdso_mapping_len;
+	int ret;
+
+	/* Be sure to map the data page */
+	vdso_mapping_len = (vdso_pages + 1) << PAGE_SHIFT;
+
+	down_write(&mm->mmap_sem);
+	vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0);
+	if (IS_ERR_VALUE(vdso_base)) {
+		ret = vdso_base;
+		goto up_fail;
+	}
+	mm->context.vdso = (void *)vdso_base;
+
+	ret = install_special_mapping(mm, vdso_base, vdso_mapping_len,
+				      VM_READ|VM_EXEC|
+				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
+				      vdso_pagelist);
+	if (ret) {
+		mm->context.vdso = NULL;
+		goto up_fail;
+	}
+
+up_fail:
+	up_write(&mm->mmap_sem);
+
+	return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	/*
+	 * We can re-use the vdso pointer in mm_context_t for identifying
+	 * the vectors page for compat applications. The vDSO will always
+	 * sit above TASK_UNMAPPED_BASE and so we don't need to worry about
+	 * it conflicting with the vectors base.
+	 */
+	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) {
+#ifdef CONFIG_COMPAT
+		if (vma->vm_start == AARCH32_VECTORS_BASE)
+			return "[vectors]";
+#endif
+		return "[vdso]";
+	}
+
+	return NULL;
+}
+
+/*
+ * We define AT_SYSINFO_EHDR, so we need these function stubs to keep
+ * Linux happy.
+ */
+int in_gate_area_no_mm(unsigned long addr)
+{
+	return 0;
+}
+
+int in_gate_area(struct mm_struct *mm, unsigned long addr)
+{
+	return 0;
+}
+
+struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
+{
+	return NULL;
+}
+
+/*
+ * Update the vDSO data page to keep in sync with kernel timekeeping.
+ */
+void update_vsyscall(struct timespec *ts, struct timespec *wtm,
+		     struct clocksource *clock, u32 mult)
+{
+	struct timespec xtime_coarse;
+	u32 use_syscall = strcmp(clock->name, "arch_sys_counter");
+
+	++vdso_data->tb_seq_count;
+	smp_wmb();
+
+	xtime_coarse = __current_kernel_time();
+	vdso_data->use_syscall			= use_syscall;
+	vdso_data->xtime_coarse_sec		= xtime_coarse.tv_sec;
+	vdso_data->xtime_coarse_nsec		= xtime_coarse.tv_nsec;
+
+	if (!use_syscall) {
+		vdso_data->cs_cycle_last	= clock->cycle_last;
+		vdso_data->xtime_clock_sec	= ts->tv_sec;
+		vdso_data->xtime_clock_nsec	= ts->tv_nsec;
+		vdso_data->cs_mult		= mult;
+		vdso_data->cs_shift		= clock->shift;
+		vdso_data->wtm_clock_sec	= wtm->tv_sec;
+		vdso_data->wtm_clock_nsec	= wtm->tv_nsec;
+	}
+
+	smp_wmb();
+	++vdso_data->tb_seq_count;
+}
+
+void update_vsyscall_tz(void)
+{
+	++vdso_data->tb_seq_count;
+	smp_wmb();
+	vdso_data->tz_minuteswest	= sys_tz.tz_minuteswest;
+	vdso_data->tz_dsttime		= sys_tz.tz_dsttime;
+	smp_wmb();
+	++vdso_data->tb_seq_count;
+}
diff --git a/arch/arm64/kernel/vdso/.gitignore b/arch/arm64/kernel/vdso/.gitignore
new file mode 100644
index 000000000000..b8cc94e9698b
--- /dev/null
+++ b/arch/arm64/kernel/vdso/.gitignore
@@ -0,0 +1,2 @@
+vdso.lds
+vdso-offsets.h
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
new file mode 100644
index 000000000000..d8064af42e62
--- /dev/null
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -0,0 +1,63 @@
+#
+# Building a vDSO image for AArch64.
+#
+# Author: Will Deacon <will.deacon@arm.com>
+# Heavily based on the vDSO Makefiles for other archs.
+#
+
+obj-vdso := gettimeofday.o note.o sigreturn.o
+
+# Build rules
+targets := $(obj-vdso) vdso.so vdso.so.dbg
+obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
+
+ccflags-y := -shared -fno-common -fno-builtin
+ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 \
+		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+
+obj-y += vdso.o
+extra-y += vdso.lds vdso-offsets.h
+CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+
+# Force dependency (incbin is bad)
+$(obj)/vdso.o : $(obj)/vdso.so
+
+# Link rule for the .so file, .lds has to be first
+$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso)
+	$(call if_changed,vdsold)
+
+# Strip rule for the .so file
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+define cmd_vdsosym
+	$(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ && \
+	cp $@ include/generated/
+endef
+
+$(obj)/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
+	$(call if_changed,vdsosym)
+
+# Assembly rules for the .S files
+$(obj-vdso): %.o: %.S
+	$(call if_changed_dep,vdsoas)
+
+# Actual build commands
+quiet_cmd_vdsold = VDSOL $@
+      cmd_vdsold = $(CC) $(c_flags) -Wl,-T $^ -o $@
+quiet_cmd_vdsoas = VDSOA $@
+      cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<
+
+# Install commands for the unstripped file
+quiet_cmd_vdso_install = INSTALL $@
+      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
+
+vdso.so: $(obj)/vdso.so.dbg
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso_install: vdso.so
diff --git a/arch/arm64/kernel/vdso/gen_vdso_offsets.sh b/arch/arm64/kernel/vdso/gen_vdso_offsets.sh
new file mode 100755
index 000000000000..01924ff071ad
--- /dev/null
+++ b/arch/arm64/kernel/vdso/gen_vdso_offsets.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+#
+# Match symbols in the DSO that look like VDSO_*; produce a header file
+# of constant offsets into the shared object.
+#
+# Doing this inside the Makefile will break the $(filter-out) function,
+# causing Kbuild to rebuild the vdso-offsets header file every time.
+#
+# Author: Will Deacon <will.deacon@arm.com
+#
+
+LC_ALL=C
+sed -n -e 's/^00*/0/' -e \
+'s/^\([0-9a-fA-F]*\) . VDSO_\([a-zA-Z0-9_]*\)$/\#define vdso_offset_\2\t0x\1/p'
diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S
new file mode 100644
index 000000000000..dcb8c203a3b2
--- /dev/null
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@@ -0,0 +1,242 @@
+/*
+ * Userspace implementations of gettimeofday() and friends.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/unistd.h>
+
+#define NSEC_PER_SEC_LO16	0xca00
+#define NSEC_PER_SEC_HI16	0x3b9a
+
+vdso_data	.req	x6
+use_syscall	.req	w7
+seqcnt		.req	w8
+
+	.macro	seqcnt_acquire
+9999:	ldr	seqcnt, [vdso_data, #VDSO_TB_SEQ_COUNT]
+	tbnz	seqcnt, #0, 9999b
+	dmb	ishld
+	ldr	use_syscall, [vdso_data, #VDSO_USE_SYSCALL]
+	.endm
+
+	.macro	seqcnt_read, cnt
+	dmb	ishld
+	ldr	\cnt, [vdso_data, #VDSO_TB_SEQ_COUNT]
+	.endm
+
+	.macro	seqcnt_check, cnt, fail
+	cmp	\cnt, seqcnt
+	b.ne	\fail
+	.endm
+
+	.text
+
+/* int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); */
+ENTRY(__kernel_gettimeofday)
+	.cfi_startproc
+	mov	x2, x30
+	.cfi_register x30, x2
+
+	/* Acquire the sequence counter and get the timespec. */
+	adr	vdso_data, _vdso_data
+1:	seqcnt_acquire
+	cbnz	use_syscall, 4f
+
+	/* If tv is NULL, skip to the timezone code. */
+	cbz	x0, 2f
+	bl	__do_get_tspec
+	seqcnt_check w13, 1b
+
+	/* Convert ns to us. */
+	mov	x11, #1000
+	udiv	x10, x10, x11
+	stp	x9, x10, [x0, #TVAL_TV_SEC]
+2:
+	/* If tz is NULL, return 0. */
+	cbz	x1, 3f
+	ldp	w4, w5, [vdso_data, #VDSO_TZ_MINWEST]
+	seqcnt_read w13
+	seqcnt_check w13, 1b
+	stp	w4, w5, [x1, #TZ_MINWEST]
+3:
+	mov	x0, xzr
+	ret	x2
+4:
+	/* Syscall fallback. */
+	mov	x8, #__NR_gettimeofday
+	svc	#0
+	ret	x2
+	.cfi_endproc
+ENDPROC(__kernel_gettimeofday)
+
+/* int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); */
+ENTRY(__kernel_clock_gettime)
+	.cfi_startproc
+	cmp	w0, #CLOCK_REALTIME
+	ccmp	w0, #CLOCK_MONOTONIC, #0x4, ne
+	b.ne	2f
+
+	mov	x2, x30
+	.cfi_register x30, x2
+
+	/* Get kernel timespec. */
+	adr	vdso_data, _vdso_data
+1:	seqcnt_acquire
+	cbnz	use_syscall, 7f
+
+	bl	__do_get_tspec
+	seqcnt_check w13, 1b
+
+	cmp	w0, #CLOCK_MONOTONIC
+	b.ne	6f
+
+	/* Get wtm timespec. */
+	ldp	x14, x15, [vdso_data, #VDSO_WTM_CLK_SEC]
+
+	/* Check the sequence counter. */
+	seqcnt_read w13
+	seqcnt_check w13, 1b
+	b	4f
+2:
+	cmp	w0, #CLOCK_REALTIME_COARSE
+	ccmp	w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
+	b.ne	8f
+
+	/* Get coarse timespec. */
+	adr	vdso_data, _vdso_data
+3:	seqcnt_acquire
+	ldp	x9, x10, [vdso_data, #VDSO_XTIME_CRS_SEC]
+
+	cmp	w0, #CLOCK_MONOTONIC_COARSE
+	b.ne	6f
+
+	/* Get wtm timespec. */
+	ldp	x14, x15, [vdso_data, #VDSO_WTM_CLK_SEC]
+
+	/* Check the sequence counter. */
+	seqcnt_read w13
+	seqcnt_check w13, 3b
+4:
+	/* Add on wtm timespec. */
+	add	x9, x9, x14
+	add	x10, x10, x15
+
+	/* Normalise the new timespec. */
+	mov	x14, #NSEC_PER_SEC_LO16
+	movk	x14, #NSEC_PER_SEC_HI16, lsl #16
+	cmp	x10, x14
+	b.lt	5f
+	sub	x10, x10, x14
+	add	x9, x9, #1
+5:
+	cmp	x10, #0
+	b.ge	6f
+	add	x10, x10, x14
+	sub	x9, x9, #1
+
+6:	/* Store to the user timespec. */
+	stp	x9, x10, [x1, #TSPEC_TV_SEC]
+	mov	x0, xzr
+	ret	x2
+7:
+	mov	x30, x2
+8:	/* Syscall fallback. */
+	mov	x8, #__NR_clock_gettime
+	svc	#0
+	ret
+	.cfi_endproc
+ENDPROC(__kernel_clock_gettime)
+
+/* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); */
+ENTRY(__kernel_clock_getres)
+	.cfi_startproc
+	cbz	w1, 3f
+
+	cmp	w0, #CLOCK_REALTIME
+	ccmp	w0, #CLOCK_MONOTONIC, #0x4, ne
+	b.ne	1f
+
+	ldr	x2, 5f
+	b	2f
+1:
+	cmp	w0, #CLOCK_REALTIME_COARSE
+	ccmp	w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
+	b.ne	4f
+	ldr	x2, 6f
+2:
+	stp	xzr, x2, [x1]
+
+3:	/* res == NULL. */
+	mov	w0, wzr
+	ret
+
+4:	/* Syscall fallback. */
+	mov	x8, #__NR_clock_getres
+	svc	#0
+	ret
+5:
+	.quad	CLOCK_REALTIME_RES
+6:
+	.quad	CLOCK_COARSE_RES
+	.cfi_endproc
+ENDPROC(__kernel_clock_getres)
+
+/*
+ * Read the current time from the architected counter.
+ * Expects vdso_data to be initialised.
+ * Clobbers the temporary registers (x9 - x15).
+ * Returns:
+ *  - (x9, x10) = (ts->tv_sec, ts->tv_nsec)
+ *  - (x11, x12) = (xtime->tv_sec, xtime->tv_nsec)
+ *  - w13 = vDSO sequence counter
+ */
+ENTRY(__do_get_tspec)
+	.cfi_startproc
+
+	/* Read from the vDSO data page. */
+	ldr	x10, [vdso_data, #VDSO_CS_CYCLE_LAST]
+	ldp	x11, x12, [vdso_data, #VDSO_XTIME_CLK_SEC]
+	ldp	w14, w15, [vdso_data, #VDSO_CS_MULT]
+	seqcnt_read w13
+
+	/* Read the physical counter. */
+	isb
+	mrs	x9, cntpct_el0
+
+	/* Calculate cycle delta and convert to ns. */
+	sub	x10, x9, x10
+	/* We can only guarantee 56 bits of precision. */
+	movn	x9, #0xff0, lsl #48
+	and	x10, x9, x10
+	mul	x10, x10, x14
+	lsr	x10, x10, x15
+
+	/* Use the kernel time to calculate the new timespec. */
+	add	x10, x12, x10
+	mov	x14, #NSEC_PER_SEC_LO16
+	movk	x14, #NSEC_PER_SEC_HI16, lsl #16
+	udiv	x15, x10, x14
+	add	x9, x15, x11
+	mul	x14, x14, x15
+	sub	x10, x10, x14
+
+	ret
+	.cfi_endproc
+ENDPROC(__do_get_tspec)
diff --git a/arch/arm64/kernel/vdso/note.S b/arch/arm64/kernel/vdso/note.S
new file mode 100644
index 000000000000..b82c85e5d972
--- /dev/null
+++ b/arch/arm64/kernel/vdso/note.S
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ *
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+#include <linux/elfnote.h>
+
+ELFNOTE_START(Linux, 0, "a")
+	.long LINUX_VERSION_CODE
+ELFNOTE_END
diff --git a/arch/arm64/kernel/vdso/sigreturn.S b/arch/arm64/kernel/vdso/sigreturn.S
new file mode 100644
index 000000000000..20d98effa7dd
--- /dev/null
+++ b/arch/arm64/kernel/vdso/sigreturn.S
@@ -0,0 +1,37 @@
+/*
+ * Sigreturn trampoline for returning from a signal when the SA_RESTORER
+ * flag is not set.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+	.text
+
+	nop
+ENTRY(__kernel_rt_sigreturn)
+	.cfi_startproc
+	.cfi_signal_frame
+	.cfi_def_cfa	x29, 0
+	.cfi_offset	x29, 0 * 8
+	.cfi_offset	x30, 1 * 8
+	mov	x8, #__NR_rt_sigreturn
+	svc	#0
+	.cfi_endproc
+ENDPROC(__kernel_rt_sigreturn)
diff --git a/arch/arm64/kernel/vdso/vdso.S b/arch/arm64/kernel/vdso/vdso.S
new file mode 100644
index 000000000000..60c1db54b41a
--- /dev/null
+++ b/arch/arm64/kernel/vdso/vdso.S
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/page.h>
+
+	__PAGE_ALIGNED_DATA
+
+	.globl vdso_start, vdso_end
+	.balign PAGE_SIZE
+vdso_start:
+	.incbin "arch/arm64/kernel/vdso/vdso.so"
+	.balign PAGE_SIZE
+vdso_end:
+
+	.previous
diff --git a/arch/arm64/kernel/vdso/vdso.lds.S b/arch/arm64/kernel/vdso/vdso.lds.S
new file mode 100644
index 000000000000..8154b8d1c826
--- /dev/null
+++ b/arch/arm64/kernel/vdso/vdso.lds.S
@@ -0,0 +1,100 @@
+/*
+ * GNU linker script for the VDSO library.
+*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ * Heavily based on the vDSO linker scripts for other archs.
+ */
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/vdso.h>
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-bigaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+
+SECTIONS
+{
+	. = VDSO_LBASE + SIZEOF_HEADERS;
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	.note		: { *(.note.*) }		:text	:note
+
+	. = ALIGN(16);
+
+	.text		: { *(.text*) }			:text	=0xd503201f
+	PROVIDE (__etext = .);
+	PROVIDE (_etext = .);
+	PROVIDE (etext = .);
+
+	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
+	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
+
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
+	.rodata		: { *(.rodata*) }		:text
+
+	_end = .;
+	PROVIDE(end = .);
+
+	. = ALIGN(PAGE_SIZE);
+	PROVIDE(_vdso_data = .);
+
+	/DISCARD/	: {
+		*(.note.GNU-stack)
+		*(.data .data.* .gnu.linkonce.d.* .sdata*)
+		*(.bss .sbss .dynbss .dynsbss)
+	}
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
+	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
+	note		PT_NOTE		FLAGS(4);		/* PF_R */
+	eh_frame_hdr	PT_GNU_EH_FRAME;
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+	LINUX_2.6.39 {
+	global:
+		__kernel_rt_sigreturn;
+		__kernel_gettimeofday;
+		__kernel_clock_gettime;
+		__kernel_clock_getres;
+	local: *;
+	};
+}
+
+/*
+ * Make the sigreturn code visible to the kernel.
+ */
+VDSO_sigtramp		= __kernel_rt_sigreturn;
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..3fae2be8b016
--- /dev/null
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -0,0 +1,126 @@
+/*
+ * ld script to make ARM Linux kernel
+ * taken from the i386 version by Russell King
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
+
+OUTPUT_ARCH(aarch64)
+ENTRY(stext)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 */
+	/DISCARD/ : {
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
+		*(.discard)
+		*(.discard.*)
+	}
+
+	. = PAGE_OFFSET + TEXT_OFFSET;
+
+	.head.text : {
+		_text = .;
+		HEAD_TEXT
+	}
+	.text : {			/* Real text segment		*/
+		_stext = .;		/* Text and read-only data	*/
+			*(.smp.pen.text)
+			__exception_text_start = .;
+			*(.exception.text)
+			__exception_text_end = .;
+			IRQENTRY_TEXT
+			TEXT_TEXT
+			SCHED_TEXT
+			LOCK_TEXT
+			*(.fixup)
+			*(.gnu.warning)
+		. = ALIGN(16);
+		*(.got)			/* Global offset table		*/
+	}
+
+	RO_DATA(PAGE_SIZE)
+
+	_etext = .;			/* End of text and rodata section */
+
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+
+	INIT_TEXT_SECTION(8)
+	.exit.text : {
+		ARM_EXIT_KEEP(EXIT_TEXT)
+	}
+	. = ALIGN(16);
+	.init.data : {
+		INIT_DATA
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+	}
+	.exit.data : {
+		ARM_EXIT_KEEP(EXIT_DATA)
+	}
+
+	PERCPU_SECTION(64)
+
+	__init_end = .;
+	. = ALIGN(THREAD_SIZE);
+	__data_loc = .;
+
+	.data : AT(__data_loc) {
+		_data = .;		/* address in memory */
+		_sdata = .;
+
+		/*
+		 * first, the init task union, aligned
+		 * to an 8192 byte boundary.
+		 */
+		INIT_TASK_DATA(THREAD_SIZE)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(64)
+		READ_MOSTLY_DATA(64)
+
+		/*
+		 * The exception fixup table (might need resorting at runtime)
+		 */
+		. = ALIGN(32);
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+
+		/*
+		 * and the usual data section
+		 */
+		DATA_DATA
+		CONSTRUCTORS
+
+		_edata = .;
+	}
+	_edata_loc = __data_loc + SIZEOF(.data);
+
+	NOTES
+
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
+	.comment 0 : { *(.comment) }
+}
diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile
new file mode 100644
index 000000000000..2fb7f6092aae
--- /dev/null
+++ b/arch/arm64/lib/Makefile
@@ -0,0 +1,4 @@
+lib-y		:= bitops.o delay.o					\
+		   strncpy_from_user.o strnlen_user.o clear_user.o	\
+		   copy_from_user.o copy_to_user.o copy_in_user.o	\
+		   copy_page.o clear_page.o
diff --git a/arch/arm64/lib/bitops.c b/arch/arm64/lib/bitops.c
new file mode 100644
index 000000000000..aa4965e60acc
--- /dev/null
+++ b/arch/arm64/lib/bitops.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+
+#ifdef CONFIG_SMP
+arch_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned = {
+       [0 ... (ATOMIC_HASH_SIZE-1)]  = __ARCH_SPIN_LOCK_UNLOCKED
+};
+#endif
diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S
new file mode 100644
index 000000000000..ef08e905e35b
--- /dev/null
+++ b/arch/arm64/lib/clear_page.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+/*
+ * Clear page @dest
+ *
+ * Parameters:
+ *	x0 - dest
+ */
+ENTRY(clear_page)
+	mrs	x1, dczid_el0
+	and	w1, w1, #0xf
+	mov	x2, #4
+	lsl	x1, x2, x1
+
+1:	dc	zva, x0
+	add	x0, x0, x1
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	1b
+	ret
+ENDPROC(clear_page)
diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S
new file mode 100644
index 000000000000..6e0ed93d51fe
--- /dev/null
+++ b/arch/arm64/lib/clear_user.S
@@ -0,0 +1,58 @@
+/*
+ * Based on arch/arm/lib/clear_user.S
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+
+/* Prototype: int __clear_user(void *addr, size_t sz)
+ * Purpose  : clear some user memory
+ * Params   : addr - user memory address to clear
+ *          : sz   - number of bytes to clear
+ * Returns  : number of bytes NOT cleared
+ *
+ * Alignment fixed up by hardware.
+ */
+ENTRY(__clear_user)
+	mov	x2, x1			// save the size for fixup return
+	subs	x1, x1, #8
+	b.mi	2f
+1:
+USER(9f, str	xzr, [x0], #8	)
+	subs	x1, x1, #8
+	b.pl	1b
+2:	adds	x1, x1, #4
+	b.mi	3f
+USER(9f, str	wzr, [x0], #4	)
+	sub	x1, x1, #4
+3:	adds	x1, x1, #2
+	b.mi	4f
+USER(9f, strh	wzr, [x0], #2	)
+	sub	x1, x1, #2
+4:	adds	x1, x1, #1
+	b.mi	5f
+	strb	wzr, [x0]
+5:	mov	x0, #0
+	ret
+ENDPROC(__clear_user)
+
+	.section .fixup,"ax"
+	.align	2
+9:	mov	x0, x2			// return the original size
+	ret
+	.previous
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
new file mode 100644
index 000000000000..5e27add9d362
--- /dev/null
+++ b/arch/arm64/lib/copy_from_user.S
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Copy from user space to a kernel buffer (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - to
+ *	x1 - from
+ *	x2 - n
+ * Returns:
+ *	x0 - bytes not copied
+ */
+ENTRY(__copy_from_user)
+	add	x4, x1, x2			// upper user buffer boundary
+	subs	x2, x2, #8
+	b.mi	2f
+1:
+USER(9f, ldr	x3, [x1], #8	)
+	subs	x2, x2, #8
+	str	x3, [x0], #8
+	b.pl	1b
+2:	adds	x2, x2, #4
+	b.mi	3f
+USER(9f, ldr	w3, [x1], #4	)
+	sub	x2, x2, #4
+	str	w3, [x0], #4
+3:	adds	x2, x2, #2
+	b.mi	4f
+USER(9f, ldrh	w3, [x1], #2	)
+	sub	x2, x2, #2
+	strh	w3, [x0], #2
+4:	adds	x2, x2, #1
+	b.mi	5f
+USER(9f, ldrb	w3, [x1]	)
+	strb	w3, [x0]
+5:	mov	x0, #0
+	ret
+ENDPROC(__copy_from_user)
+
+	.section .fixup,"ax"
+	.align	2
+9:	sub	x2, x4, x1
+	mov	x3, x2
+10:	strb	wzr, [x0], #1			// zero remaining buffer space
+	subs	x3, x3, #1
+	b.ne	10b
+	mov	x0, x2				// bytes not copied
+	ret
+	.previous
diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S
new file mode 100644
index 000000000000..84b6c9bb9b93
--- /dev/null
+++ b/arch/arm64/lib/copy_in_user.S
@@ -0,0 +1,63 @@
+/*
+ * Copy from user space to user space
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Copy from user space to user space (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - to
+ *	x1 - from
+ *	x2 - n
+ * Returns:
+ *	x0 - bytes not copied
+ */
+ENTRY(__copy_in_user)
+	add	x4, x0, x2			// upper user buffer boundary
+	subs	x2, x2, #8
+	b.mi	2f
+1:
+USER(9f, ldr	x3, [x1], #8	)
+	subs	x2, x2, #8
+USER(9f, str	x3, [x0], #8	)
+	b.pl	1b
+2:	adds	x2, x2, #4
+	b.mi	3f
+USER(9f, ldr	w3, [x1], #4	)
+	sub	x2, x2, #4
+USER(9f, str	w3, [x0], #4	)
+3:	adds	x2, x2, #2
+	b.mi	4f
+USER(9f, ldrh	w3, [x1], #2	)
+	sub	x2, x2, #2
+USER(9f, strh	w3, [x0], #2	)
+4:	adds	x2, x2, #1
+	b.mi	5f
+USER(9f, ldrb	w3, [x1]	)
+USER(9f, strb	w3, [x0]	)
+5:	mov	x0, #0
+	ret
+ENDPROC(__copy_in_user)
+
+	.section .fixup,"ax"
+	.align	2
+9:	sub	x0, x4, x0			// bytes not copied
+	ret
+	.previous
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
new file mode 100644
index 000000000000..512b9a7b980e
--- /dev/null
+++ b/arch/arm64/lib/copy_page.S
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+/*
+ * Copy a page from src to dest (both are page aligned)
+ *
+ * Parameters:
+ *	x0 - dest
+ *	x1 - src
+ */
+ENTRY(copy_page)
+	/* Assume cache line size is 64 bytes. */
+	prfm	pldl1strm, [x1, #64]
+1:	ldp	x2, x3, [x1]
+	ldp	x4, x5, [x1, #16]
+	ldp	x6, x7, [x1, #32]
+	ldp	x8, x9, [x1, #48]
+	add	x1, x1, #64
+	prfm	pldl1strm, [x1, #64]
+	stnp	x2, x3, [x0]
+	stnp	x4, x5, [x0, #16]
+	stnp	x6, x7, [x0, #32]
+	stnp	x8, x9, [x0, #48]
+	add	x0, x0, #64
+	tst	x1, #(PAGE_SIZE - 1)
+	b.ne	1b
+	ret
+ENDPROC(copy_page)
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
new file mode 100644
index 000000000000..a0aeeb9b7a28
--- /dev/null
+++ b/arch/arm64/lib/copy_to_user.S
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Copy to user space from a kernel buffer (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - to
+ *	x1 - from
+ *	x2 - n
+ * Returns:
+ *	x0 - bytes not copied
+ */
+ENTRY(__copy_to_user)
+	add	x4, x0, x2			// upper user buffer boundary
+	subs	x2, x2, #8
+	b.mi	2f
+1:
+	ldr	x3, [x1], #8
+	subs	x2, x2, #8
+USER(9f, str	x3, [x0], #8	)
+	b.pl	1b
+2:	adds	x2, x2, #4
+	b.mi	3f
+	ldr	w3, [x1], #4
+	sub	x2, x2, #4
+USER(9f, str	w3, [x0], #4	)
+3:	adds	x2, x2, #2
+	b.mi	4f
+	ldrh	w3, [x1], #2
+	sub	x2, x2, #2
+USER(9f, strh	w3, [x0], #2	)
+4:	adds	x2, x2, #1
+	b.mi	5f
+	ldrb	w3, [x1]
+USER(9f, strb	w3, [x0]	)
+5:	mov	x0, #0
+	ret
+ENDPROC(__copy_to_user)
+
+	.section .fixup,"ax"
+	.align	2
+9:	sub	x0, x4, x0			// bytes not copied
+	ret
+	.previous
diff --git a/arch/arm64/lib/delay.c b/arch/arm64/lib/delay.c
new file mode 100644
index 000000000000..dad4ec9bbfd1
--- /dev/null
+++ b/arch/arm64/lib/delay.c
@@ -0,0 +1,55 @@
+/*
+ * Delay loops based on the OpenRISC implementation.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/timex.h>
+
+void __delay(unsigned long cycles)
+{
+	cycles_t start = get_cycles();
+
+	while ((get_cycles() - start) < cycles)
+		cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+inline void __const_udelay(unsigned long xloops)
+{
+	unsigned long loops;
+
+	loops = xloops * loops_per_jiffy * HZ;
+	__delay(loops >> 32);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x10C7UL); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x5UL); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);
diff --git a/arch/arm64/lib/strncpy_from_user.S b/arch/arm64/lib/strncpy_from_user.S
new file mode 100644
index 000000000000..56e448a831a0
--- /dev/null
+++ b/arch/arm64/lib/strncpy_from_user.S
@@ -0,0 +1,50 @@
+/*
+ * Based on arch/arm/lib/strncpy_from_user.S
+ *
+ * Copyright (C) 1995-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+	.text
+	.align	5
+
+/*
+ * Copy a string from user space to kernel space.
+ *  x0 = dst, x1 = src, x2 = byte length
+ * returns the number of characters copied (strlen of copied string),
+ *  -EFAULT on exception, or "len" if we fill the whole buffer
+ */
+ENTRY(__strncpy_from_user)
+	mov	x4, x1
+1:	subs	x2, x2, #1
+	bmi	2f
+USER(9f, ldrb	w3, [x1], #1	)
+	strb	w3, [x0], #1
+	cbnz	w3, 1b
+	sub	x1, x1, #1	// take NUL character out of count
+2:	sub	x0, x1, x4
+	ret
+ENDPROC(__strncpy_from_user)
+
+	.section .fixup,"ax"
+	.align	0
+9:	strb	wzr, [x0]	// null terminate
+	mov	x0, #-EFAULT
+	ret
+	.previous
diff --git a/arch/arm64/lib/strnlen_user.S b/arch/arm64/lib/strnlen_user.S
new file mode 100644
index 000000000000..7f7b176a5646
--- /dev/null
+++ b/arch/arm64/lib/strnlen_user.S
@@ -0,0 +1,47 @@
+/*
+ * Based on arch/arm/lib/strnlen_user.S
+ *
+ * Copyright (C) 1995-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+	.text
+	.align	5
+
+/* Prototype: unsigned long __strnlen_user(const char *str, long n)
+ * Purpose  : get length of a string in user memory
+ * Params   : str - address of string in user memory
+ * Returns  : length of string *including terminator*
+ *	      or zero on exception, or n if too long
+ */
+ENTRY(__strnlen_user)
+	mov	x2, x0
+1:	subs	x1, x1, #1
+	b.mi	2f
+USER(9f, ldrb	w3, [x0], #1	)
+	cbnz	w3, 1b
+2:	sub	x0, x0, x2
+	ret
+ENDPROC(__strnlen_user)
+
+	.section .fixup,"ax"
+	.align	0
+9:	mov	x0, #0
+	ret
+	.previous
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
new file mode 100644
index 000000000000..3140a2abcdc2
--- /dev/null
+++ b/arch/arm64/mm/Makefile
@@ -0,0 +1,4 @@
+obj-y				:= dma-mapping.o extable.o fault.o init.o \
+				   cache.o copypage.o flush.o \
+				   ioremap.o mmap.o pgd.o mmu.o \
+				   context.o tlb.o proc.o
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
new file mode 100644
index 000000000000..abe69b80cf7f
--- /dev/null
+++ b/arch/arm64/mm/cache.S
@@ -0,0 +1,168 @@
+/*
+ * Cache maintenance
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+#include "proc-macros.S"
+
+/*
+ *	__flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: x0-x7, x9-x11
+ */
+ENTRY(__flush_dcache_all)
+	dsb	sy				// ensure ordering with previous memory accesses
+	mrs	x0, clidr_el1			// read clidr
+	and	x3, x0, #0x7000000		// extract loc from clidr
+	lsr	x3, x3, #23			// left align loc bit field
+	cbz	x3, finished			// if loc is 0, then no need to clean
+	mov	x10, #0				// start clean at cache level 0
+loop1:
+	add	x2, x10, x10, lsr #1		// work out 3x current cache level
+	lsr	x1, x0, x2			// extract cache type bits from clidr
+	and	x1, x1, #7			// mask of the bits for current cache only
+	cmp	x1, #2				// see what cache we have at this level
+	b.lt	skip				// skip if no cache, or just i-cache
+	save_and_disable_irqs x9		// make CSSELR and CCSIDR access atomic
+	msr	csselr_el1, x10			// select current cache level in csselr
+	isb					// isb to sych the new cssr&csidr
+	mrs	x1, ccsidr_el1			// read the new ccsidr
+	restore_irqs x9
+	and	x2, x1, #7			// extract the length of the cache lines
+	add	x2, x2, #4			// add 4 (line length offset)
+	mov	x4, #0x3ff
+	and	x4, x4, x1, lsr #3		// find maximum number on the way size
+	clz	x5, x4				// find bit position of way size increment
+	mov	x7, #0x7fff
+	and	x7, x7, x1, lsr #13		// extract max number of the index size
+loop2:
+	mov	x9, x4				// create working copy of max way size
+loop3:
+	lsl	x6, x9, x5
+	orr	x11, x10, x6			// factor way and cache number into x11
+	lsl	x6, x7, x2
+	orr	x11, x11, x6			// factor index number into x11
+	dc	cisw, x11			// clean & invalidate by set/way
+	subs	x9, x9, #1			// decrement the way
+	b.ge	loop3
+	subs	x7, x7, #1			// decrement the index
+	b.ge	loop2
+skip:
+	add	x10, x10, #2			// increment cache number
+	cmp	x3, x10
+	b.gt	loop1
+finished:
+	mov	x10, #0				// swith back to cache level 0
+	msr	csselr_el1, x10			// select current cache level in csselr
+	dsb	sy
+	isb
+	ret
+ENDPROC(__flush_dcache_all)
+
+/*
+ *	flush_cache_all()
+ *
+ *	Flush the entire cache system.  The data cache flush is now achieved
+ *	using atomic clean / invalidates working outwards from L1 cache. This
+ *	is done using Set/Way based cache maintainance instructions.  The
+ *	instruction cache can still be invalidated back to the point of
+ *	unification in a single instruction.
+ */
+ENTRY(flush_cache_all)
+	mov	x12, lr
+	bl	__flush_dcache_all
+	mov	x0, #0
+	ic	ialluis				// I+BTB cache invalidate
+	ret	x12
+ENDPROC(flush_cache_all)
+
+/*
+ *	flush_icache_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(flush_icache_range)
+	/* FALLTHROUGH */
+
+/*
+ *	__flush_cache_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(__flush_cache_user_range)
+	dcache_line_size x2, x3
+	sub	x3, x2, #1
+	bic	x4, x0, x3
+1:
+USER(9f, dc	cvau, x4	)		// clean D line to PoU
+	add	x4, x4, x2
+	cmp	x4, x1
+	b.lo	1b
+	dsb	sy
+
+	icache_line_size x2, x3
+	sub	x3, x2, #1
+	bic	x4, x0, x3
+1:
+USER(9f, ic	ivau, x4	)		// invalidate I line PoU
+	add	x4, x4, x2
+	cmp	x4, x1
+	b.lo	1b
+9:						// ignore any faulting cache operation
+	dsb	sy
+	isb
+	ret
+ENDPROC(flush_icache_range)
+ENDPROC(__flush_cache_user_range)
+
+/*
+ *	__flush_kern_dcache_page(kaddr)
+ *
+ *	Ensure that the data held in the page kaddr is written back to the
+ *	page in question.
+ *
+ *	- kaddr   - kernel address
+ *	- size    - size in question
+ */
+ENTRY(__flush_dcache_area)
+	dcache_line_size x2, x3
+	add	x1, x0, x1
+	sub	x3, x2, #1
+	bic	x0, x0, x3
+1:	dc	civac, x0			// clean & invalidate D line / unified line
+	add	x0, x0, x2
+	cmp	x0, x1
+	b.lo	1b
+	dsb	sy
+	ret
+ENDPROC(__flush_dcache_area)
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
new file mode 100644
index 000000000000..baa758d37021
--- /dev/null
+++ b/arch/arm64/mm/context.c
@@ -0,0 +1,159 @@
+/*
+ * Based on arch/arm/mm/context.c
+ *
+ * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/cachetype.h>
+
+#define asid_bits(reg) \
+	(((read_cpuid(ID_AA64MMFR0_EL1) & 0xf0) >> 2) + 8)
+
+#define ASID_FIRST_VERSION	(1 << MAX_ASID_BITS)
+
+static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
+unsigned int cpu_last_asid = ASID_FIRST_VERSION;
+
+/*
+ * We fork()ed a process, and we need a new context for the child to run in.
+ */
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context.id = 0;
+	raw_spin_lock_init(&mm->context.id_lock);
+}
+
+static void flush_context(void)
+{
+	/* set the reserved TTBR0 before flushing the TLB */
+	cpu_set_reserved_ttbr0();
+	flush_tlb_all();
+	if (icache_is_aivivt())
+		__flush_icache_all();
+}
+
+#ifdef CONFIG_SMP
+
+static void set_mm_context(struct mm_struct *mm, unsigned int asid)
+{
+	unsigned long flags;
+
+	/*
+	 * Locking needed for multi-threaded applications where the same
+	 * mm->context.id could be set from different CPUs during the
+	 * broadcast. This function is also called via IPI so the
+	 * mm->context.id_lock has to be IRQ-safe.
+	 */
+	raw_spin_lock_irqsave(&mm->context.id_lock, flags);
+	if (likely((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS)) {
+		/*
+		 * Old version of ASID found. Set the new one and reset
+		 * mm_cpumask(mm).
+		 */
+		mm->context.id = asid;
+		cpumask_clear(mm_cpumask(mm));
+	}
+	raw_spin_unlock_irqrestore(&mm->context.id_lock, flags);
+
+	/*
+	 * Set the mm_cpumask(mm) bit for the current CPU.
+	 */
+	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+}
+
+/*
+ * Reset the ASID on the current CPU. This function call is broadcast from the
+ * CPU handling the ASID rollover and holding cpu_asid_lock.
+ */
+static void reset_context(void *info)
+{
+	unsigned int asid;
+	unsigned int cpu = smp_processor_id();
+	struct mm_struct *mm = current->active_mm;
+
+	smp_rmb();
+	asid = cpu_last_asid + cpu;
+
+	flush_context();
+	set_mm_context(mm, asid);
+
+	/* set the new ASID */
+	cpu_switch_mm(mm->pgd, mm);
+}
+
+#else
+
+static inline void set_mm_context(struct mm_struct *mm, unsigned int asid)
+{
+	mm->context.id = asid;
+	cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
+}
+
+#endif
+
+void __new_context(struct mm_struct *mm)
+{
+	unsigned int asid;
+	unsigned int bits = asid_bits();
+
+	raw_spin_lock(&cpu_asid_lock);
+#ifdef CONFIG_SMP
+	/*
+	 * Check the ASID again, in case the change was broadcast from another
+	 * CPU before we acquired the lock.
+	 */
+	if (!unlikely((mm->context.id ^ cpu_last_asid) >> MAX_ASID_BITS)) {
+		cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+		raw_spin_unlock(&cpu_asid_lock);
+		return;
+	}
+#endif
+	/*
+	 * At this point, it is guaranteed that the current mm (with an old
+	 * ASID) isn't active on any other CPU since the ASIDs are changed
+	 * simultaneously via IPI.
+	 */
+	asid = ++cpu_last_asid;
+
+	/*
+	 * If we've used up all our ASIDs, we need to start a new version and
+	 * flush the TLB.
+	 */
+	if (unlikely((asid & ((1 << bits) - 1)) == 0)) {
+		/* increment the ASID version */
+		cpu_last_asid += (1 << MAX_ASID_BITS) - (1 << bits);
+		if (cpu_last_asid == 0)
+			cpu_last_asid = ASID_FIRST_VERSION;
+		asid = cpu_last_asid + smp_processor_id();
+		flush_context();
+#ifdef CONFIG_SMP
+		smp_wmb();
+		smp_call_function(reset_context, NULL, 1);
+#endif
+		cpu_last_asid += NR_CPUS - 1;
+	}
+
+	set_mm_context(mm, asid);
+	raw_spin_unlock(&cpu_asid_lock);
+}
diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c
new file mode 100644
index 000000000000..9aecbace4128
--- /dev/null
+++ b/arch/arm64/mm/copypage.c
@@ -0,0 +1,34 @@
+/*
+ * Based on arch/arm/mm/copypage.c
+ *
+ * Copyright (C) 2002 Deep Blue Solutions Ltd, All Rights Reserved.
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+
+void __cpu_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+	copy_page(kto, kfrom);
+	__flush_dcache_area(kto, PAGE_SIZE);
+}
+
+void __cpu_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+	clear_page(kaddr);
+}
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
new file mode 100644
index 000000000000..5eb244453a5b
--- /dev/null
+++ b/arch/arm64/mm/dma-mapping.c
@@ -0,0 +1,79 @@
+/*
+ * SWIOTLB-based DMA API implementation
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/swiotlb.h>
+
+#include <asm/cacheflush.h>
+
+struct dma_map_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
+static void *arm64_swiotlb_alloc_coherent(struct device *dev, size_t size,
+					  dma_addr_t *dma_handle, gfp_t flags,
+					  struct dma_attrs *attrs)
+{
+	if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
+	    dev->coherent_dma_mask <= DMA_BIT_MASK(32))
+		flags |= GFP_DMA32;
+	return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
+}
+
+static void arm64_swiotlb_free_coherent(struct device *dev, size_t size,
+					void *vaddr, dma_addr_t dma_handle,
+					struct dma_attrs *attrs)
+{
+	swiotlb_free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static struct dma_map_ops arm64_swiotlb_dma_ops = {
+	.alloc = arm64_swiotlb_alloc_coherent,
+	.free = arm64_swiotlb_free_coherent,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.dma_supported = swiotlb_dma_supported,
+	.mapping_error = swiotlb_dma_mapping_error,
+};
+
+void __init swiotlb_init_with_default_size(size_t default_size, int verbose);
+
+void __init arm64_swiotlb_init(size_t max_size)
+{
+	dma_ops = &arm64_swiotlb_dma_ops;
+	swiotlb_init_with_default_size(min((size_t)SZ_64M, max_size), 1);
+}
+
+#define PREALLOC_DMA_DEBUG_ENTRIES	4096
+
+static int __init dma_debug_do_init(void)
+{
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+	return 0;
+}
+fs_initcall(dma_debug_do_init);
diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c
new file mode 100644
index 000000000000..79444279ba8c
--- /dev/null
+++ b/arch/arm64/mm/extable.c
@@ -0,0 +1,17 @@
+/*
+ * Based on arch/arm/mm/extable.c
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(instruction_pointer(regs));
+	if (fixup)
+		regs->pc = fixup->fixup;
+
+	return fixup != NULL;
+}
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
new file mode 100644
index 000000000000..1909a69983ca
--- /dev/null
+++ b/arch/arm64/mm/fault.c
@@ -0,0 +1,534 @@
+/*
+ * Based on arch/arm/mm/fault.c
+ *
+ * Copyright (C) 1995  Linus Torvalds
+ * Copyright (C) 1995-2004 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/mm.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
+#include <linux/perf_event.h>
+
+#include <asm/exception.h>
+#include <asm/debug-monitors.h>
+#include <asm/system_misc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Dump out the page tables associated with 'addr' in mm 'mm'.
+ */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{
+	pgd_t *pgd;
+
+	if (!mm)
+		mm = &init_mm;
+
+	pr_alert("pgd = %p\n", mm->pgd);
+	pgd = pgd_offset(mm, addr);
+	pr_alert("[%08lx] *pgd=%016llx", addr, pgd_val(*pgd));
+
+	do {
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *pte;
+
+		if (pgd_none_or_clear_bad(pgd))
+			break;
+
+		pud = pud_offset(pgd, addr);
+		if (pud_none_or_clear_bad(pud))
+			break;
+
+		pmd = pmd_offset(pud, addr);
+		printk(", *pmd=%016llx", pmd_val(*pmd));
+		if (pmd_none_or_clear_bad(pmd))
+			break;
+
+		pte = pte_offset_map(pmd, addr);
+		printk(", *pte=%016llx", pte_val(*pte));
+		pte_unmap(pte);
+	} while(0);
+
+	printk("\n");
+}
+
+/*
+ * The kernel tried to access some page that wasn't present.
+ */
+static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr,
+			      unsigned int esr, struct pt_regs *regs)
+{
+	/*
+	 * Are we prepared to handle this kernel fault?
+	 */
+	if (fixup_exception(regs))
+		return;
+
+	/*
+	 * No handler, we'll have to terminate things with extreme prejudice.
+	 */
+	bust_spinlocks(1);
+	pr_alert("Unable to handle kernel %s at virtual address %08lx\n",
+		 (addr < PAGE_SIZE) ? "NULL pointer dereference" :
+		 "paging request", addr);
+
+	show_pte(mm, addr);
+	die("Oops", regs, esr);
+	bust_spinlocks(0);
+	do_exit(SIGKILL);
+}
+
+/*
+ * Something tried to access memory that isn't in our memory map. User mode
+ * accesses just cause a SIGSEGV
+ */
+static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
+			    unsigned int esr, unsigned int sig, int code,
+			    struct pt_regs *regs)
+{
+	struct siginfo si;
+
+	if (show_unhandled_signals) {
+		pr_info("%s[%d]: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n",
+			tsk->comm, task_pid_nr(tsk), sig, addr, esr);
+		show_pte(tsk->mm, addr);
+		show_regs(regs);
+	}
+
+	tsk->thread.fault_address = addr;
+	si.si_signo = sig;
+	si.si_errno = 0;
+	si.si_code = code;
+	si.si_addr = (void __user *)addr;
+	force_sig_info(sig, &si, tsk);
+}
+
+void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->active_mm;
+
+	/*
+	 * If we are in kernel mode at this point, we have no context to
+	 * handle this fault with.
+	 */
+	if (user_mode(regs))
+		__do_user_fault(tsk, addr, esr, SIGSEGV, SEGV_MAPERR, regs);
+	else
+		__do_kernel_fault(mm, addr, esr, regs);
+}
+
+#define VM_FAULT_BADMAP		0x010000
+#define VM_FAULT_BADACCESS	0x020000
+
+#define ESR_WRITE		(1 << 6)
+#define ESR_LNX_EXEC		(1 << 24)
+
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int esr, struct vm_area_struct *vma)
+{
+	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+	if (esr & ESR_WRITE)
+		mask = VM_WRITE;
+	if (esr & ESR_LNX_EXEC)
+		mask = VM_EXEC;
+
+	return vma->vm_flags & mask ? false : true;
+}
+
+static int __do_page_fault(struct mm_struct *mm, unsigned long addr,
+			   unsigned int esr, unsigned int flags,
+			   struct task_struct *tsk)
+{
+	struct vm_area_struct *vma;
+	int fault;
+
+	vma = find_vma(mm, addr);
+	fault = VM_FAULT_BADMAP;
+	if (unlikely(!vma))
+		goto out;
+	if (unlikely(vma->vm_start > addr))
+		goto check_stack;
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so we can handle
+	 * it.
+	 */
+good_area:
+	if (access_error(esr, vma)) {
+		fault = VM_FAULT_BADACCESS;
+		goto out;
+	}
+
+	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
+
+check_stack:
+	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+		goto good_area;
+out:
+	return fault;
+}
+
+static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
+				   struct pt_regs *regs)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	int fault, sig, code;
+	int write = esr & ESR_WRITE;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+		(write ? FAULT_FLAG_WRITE : 0);
+
+	tsk = current;
+	mm  = tsk->mm;
+
+	/* Enable interrupts if they were enabled in the parent context. */
+	if (interrupts_enabled(regs))
+		local_irq_enable();
+
+	/*
+	 * If we're in an interrupt or have no user context, we must not take
+	 * the fault.
+	 */
+	if (in_atomic() || !mm)
+		goto no_context;
+
+	/*
+	 * As per x86, we may deadlock here. However, since the kernel only
+	 * validly references user space from well defined areas of the code,
+	 * we can bug out early if this is from code which shouldn't.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if (!user_mode(regs) && !search_exception_tables(regs->pc))
+			goto no_context;
+retry:
+		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in which
+		 * case, we'll have missed the might_sleep() from down_read().
+		 */
+		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) && !search_exception_tables(regs->pc))
+			goto no_context;
+#endif
+	}
+
+	fault = __do_page_fault(mm, addr, esr, flags, tsk);
+
+	/*
+	 * If we need to retry but a fatal signal is pending, handle the
+	 * signal first. We do not need to release the mmap_sem because it
+	 * would already be released in __lock_page_or_retry in mm/filemap.c.
+	 */
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return 0;
+
+	/*
+	 * Major/minor page fault accounting is only done on the initial
+	 * attempt. If we go through a retry, it is extremely likely that the
+	 * page will be found in page cache at that point.
+	 */
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			tsk->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs,
+				      addr);
+		} else {
+			tsk->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs,
+				      addr);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			/*
+			 * Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk of
+			 * starvation.
+			 */
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
+
+	/*
+	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+	 */
+	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP |
+			      VM_FAULT_BADACCESS))))
+		return 0;
+
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we got
+		 * oom-killed).
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
+	/*
+	 * If we are in kernel mode at this point, we have no context to
+	 * handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
+	if (fault & VM_FAULT_SIGBUS) {
+		/*
+		 * We had some memory, but were unable to successfully fix up
+		 * this page fault.
+		 */
+		sig = SIGBUS;
+		code = BUS_ADRERR;
+	} else {
+		/*
+		 * Something tried to access memory that isn't in our memory
+		 * map.
+		 */
+		sig = SIGSEGV;
+		code = fault == VM_FAULT_BADACCESS ?
+			SEGV_ACCERR : SEGV_MAPERR;
+	}
+
+	__do_user_fault(tsk, addr, esr, sig, code, regs);
+	return 0;
+
+no_context:
+	__do_kernel_fault(mm, addr, esr, regs);
+	return 0;
+}
+
+/*
+ * First Level Translation Fault Handler
+ *
+ * We enter here because the first level page table doesn't contain a valid
+ * entry for the address.
+ *
+ * If the address is in kernel space (>= TASK_SIZE), then we are probably
+ * faulting in the vmalloc() area.
+ *
+ * If the init_task's first level page tables contains the relevant entry, we
+ * copy the it to this task.  If not, we send the process a signal, fixup the
+ * exception, or oops the kernel.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may be in an interrupt
+ * or a critical region, and should only copy the information from the master
+ * page table, nothing more.
+ */
+static int __kprobes do_translation_fault(unsigned long addr,
+					  unsigned int esr,
+					  struct pt_regs *regs)
+{
+	if (addr < TASK_SIZE)
+		return do_page_fault(addr, esr, regs);
+
+	do_bad_area(addr, esr, regs);
+	return 0;
+}
+
+/*
+ * Some section permission faults need to be handled gracefully.  They can
+ * happen due to a __{get,put}_user during an oops.
+ */
+static int do_sect_fault(unsigned long addr, unsigned int esr,
+			 struct pt_regs *regs)
+{
+	do_bad_area(addr, esr, regs);
+	return 0;
+}
+
+/*
+ * This abort handler always returns "fault".
+ */
+static int do_bad(unsigned long addr, unsigned int esr, struct pt_regs *regs)
+{
+	return 1;
+}
+
+static struct fault_info {
+	int	(*fn)(unsigned long addr, unsigned int esr, struct pt_regs *regs);
+	int	sig;
+	int	code;
+	const char *name;
+} fault_info[] = {
+	{ do_bad,		SIGBUS,  0,		"ttbr address size fault"	},
+	{ do_bad,		SIGBUS,  0,		"level 1 address size fault"	},
+	{ do_bad,		SIGBUS,  0,		"level 2 address size fault"	},
+	{ do_bad,		SIGBUS,  0,		"level 3 address size fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"input address range fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
+	{ do_bad,		SIGBUS,  0,		"reserved access flag fault"	},
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 access flag fault"	},
+	{ do_bad,		SIGBUS,  0,		"reserved permission fault"	},
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 1 permission fault"	},
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 permission fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 permission fault"	},
+	{ do_bad,		SIGBUS,  0,		"synchronous external abort"	},
+	{ do_bad,		SIGBUS,  0,		"asynchronous external abort"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			},
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error"	},
+	{ do_bad,		SIGBUS,  0,		"asynchronous parity error"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			},
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"unknown 32"			},
+	{ do_bad,		SIGBUS,  BUS_ADRALN,	"alignment fault"		},
+	{ do_bad,		SIGBUS,  0,		"debug event"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 35"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 36"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 37"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 38"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 39"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 40"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 41"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 42"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 43"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 44"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 45"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 46"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 47"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 48"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 49"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 50"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 51"			},
+	{ do_bad,		SIGBUS,  0,		"implementation fault (lockdown abort)" },
+	{ do_bad,		SIGBUS,  0,		"unknown 53"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 54"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 55"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 56"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 57"			},
+	{ do_bad,		SIGBUS,  0,		"implementation fault (coprocessor abort)" },
+	{ do_bad,		SIGBUS,  0,		"unknown 59"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 60"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 61"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 62"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 63"			},
+};
+
+/*
+ * Dispatch a data abort to the relevant handler.
+ */
+asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr,
+					 struct pt_regs *regs)
+{
+	const struct fault_info *inf = fault_info + (esr & 63);
+	struct siginfo info;
+
+	if (!inf->fn(addr, esr, regs))
+		return;
+
+	pr_alert("Unhandled fault: %s (0x%08x) at 0x%016lx\n",
+		 inf->name, esr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code  = inf->code;
+	info.si_addr  = (void __user *)addr;
+	arm64_notify_die("", regs, &info, esr);
+}
+
+/*
+ * Handle stack alignment exceptions.
+ */
+asmlinkage void __exception do_sp_pc_abort(unsigned long addr,
+					   unsigned int esr,
+					   struct pt_regs *regs)
+{
+	struct siginfo info;
+
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code  = BUS_ADRALN;
+	info.si_addr  = (void __user *)addr;
+	arm64_notify_die("", regs, &info, esr);
+}
+
+static struct fault_info debug_fault_info[] = {
+	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware breakpoint"	},
+	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware single-step"	},
+	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware watchpoint"	},
+	{ do_bad,	SIGBUS,		0,		"unknown 3"		},
+	{ do_bad,	SIGTRAP,	TRAP_BRKPT,	"aarch32 BKPT"		},
+	{ do_bad,	SIGTRAP,	0,		"aarch32 vector catch"	},
+	{ do_bad,	SIGTRAP,	TRAP_BRKPT,	"aarch64 BRK"		},
+	{ do_bad,	SIGBUS,		0,		"unknown 7"		},
+};
+
+void __init hook_debug_fault_code(int nr,
+				  int (*fn)(unsigned long, unsigned int, struct pt_regs *),
+				  int sig, int code, const char *name)
+{
+	BUG_ON(nr < 0 || nr >= ARRAY_SIZE(debug_fault_info));
+
+	debug_fault_info[nr].fn		= fn;
+	debug_fault_info[nr].sig	= sig;
+	debug_fault_info[nr].code	= code;
+	debug_fault_info[nr].name	= name;
+}
+
+asmlinkage int __exception do_debug_exception(unsigned long addr,
+					      unsigned int esr,
+					      struct pt_regs *regs)
+{
+	const struct fault_info *inf = debug_fault_info + DBG_ESR_EVT(esr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, esr, regs))
+		return 1;
+
+	pr_alert("Unhandled debug exception: %s (0x%08x) at 0x%016lx\n",
+		 inf->name, esr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code  = inf->code;
+	info.si_addr  = (void __user *)addr;
+	arm64_notify_die("", regs, &info, esr);
+
+	return 0;
+}
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
new file mode 100644
index 000000000000..c144adb1682f
--- /dev/null
+++ b/arch/arm64/mm/flush.c
@@ -0,0 +1,135 @@
+/*
+ * Based on arch/arm/mm/flush.c
+ *
+ * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
+#include <asm/tlbflush.h>
+
+#include "mm.h"
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end)
+{
+	if (vma->vm_flags & VM_EXEC)
+		__flush_icache_all();
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr,
+		      unsigned long pfn)
+{
+}
+
+static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len)
+{
+	if (vma->vm_flags & VM_EXEC) {
+		unsigned long addr = (unsigned long)kaddr;
+		if (icache_is_aliasing()) {
+			__flush_dcache_area(kaddr, len);
+			__flush_icache_all();
+		} else {
+			flush_icache_range(addr, addr + len);
+		}
+	}
+}
+
+/*
+ * Copy user data from/to a page which is mapped into a different processes
+ * address space.  Really, we want to allow our "user space" model to handle
+ * this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long uaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+#ifdef CONFIG_SMP
+	preempt_disable();
+#endif
+	memcpy(dst, src, len);
+	flush_ptrace_access(vma, page, uaddr, dst, len);
+#ifdef CONFIG_SMP
+	preempt_enable();
+#endif
+}
+
+void __flush_dcache_page(struct page *page)
+{
+	__flush_dcache_area(page_address(page), PAGE_SIZE);
+}
+
+void __sync_icache_dcache(pte_t pte, unsigned long addr)
+{
+	unsigned long pfn;
+	struct page *page;
+
+	pfn = pte_pfn(pte);
+	if (!pfn_valid(pfn))
+		return;
+
+	page = pfn_to_page(pfn);
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags)) {
+		__flush_dcache_page(page);
+		__flush_icache_all();
+	} else if (icache_is_aivivt()) {
+		__flush_icache_all();
+	}
+}
+
+/*
+ * Ensure cache coherency between kernel mapping and userspace mapping of this
+ * page.
+ */
+void flush_dcache_page(struct page *page)
+{
+	struct address_space *mapping;
+
+	/*
+	 * The zero page is never written to, so never has any dirty cache
+	 * lines, and therefore never needs to be flushed.
+	 */
+	if (page == ZERO_PAGE(0))
+		return;
+
+	mapping = page_mapping(page);
+	if (mapping && mapping_mapped(mapping)) {
+		__flush_dcache_page(page);
+		__flush_icache_all();
+		set_bit(PG_dcache_clean, &page->flags);
+	} else {
+		clear_bit(PG_dcache_clean, &page->flags);
+	}
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+/*
+ * Additional functions defined in assembly.
+ */
+EXPORT_SYMBOL(flush_cache_all);
+EXPORT_SYMBOL(flush_icache_range);
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
new file mode 100644
index 000000000000..5f719ba949bc
--- /dev/null
+++ b/arch/arm64/mm/init.c
@@ -0,0 +1,437 @@
+/*
+ * Based on arch/arm/mm/init.c
+ *
+ * Copyright (C) 1995-2005 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/initrd.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
+#include <linux/sort.h>
+#include <linux/of_fdt.h>
+
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+
+#include "mm.h"
+
+static unsigned long phys_initrd_start __initdata = 0;
+static unsigned long phys_initrd_size __initdata = 0;
+
+phys_addr_t memstart_addr __read_mostly = 0;
+
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+					    unsigned long end)
+{
+	phys_initrd_start = start;
+	phys_initrd_size = end - start;
+}
+
+static int __init early_initrd(char *p)
+{
+	unsigned long start, size;
+	char *endp;
+
+	start = memparse(p, &endp);
+	if (*endp == ',') {
+		size = memparse(endp + 1, NULL);
+
+		phys_initrd_start = start;
+		phys_initrd_size = size;
+	}
+	return 0;
+}
+early_param("initrd", early_initrd);
+
+#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
+
+static void __init zone_sizes_init(unsigned long min, unsigned long max)
+{
+	struct memblock_region *reg;
+	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+	unsigned long max_dma32 = min;
+
+	memset(zone_size, 0, sizeof(zone_size));
+
+#ifdef CONFIG_ZONE_DMA32
+	/* 4GB maximum for 32-bit only capable devices */
+	max_dma32 = min(max, MAX_DMA32_PFN);
+	zone_size[ZONE_DMA32] = max_dma32 - min;
+#endif
+	zone_size[ZONE_NORMAL] = max - max_dma32;
+
+	memcpy(zhole_size, zone_size, sizeof(zhole_size));
+
+	for_each_memblock(memory, reg) {
+		unsigned long start = memblock_region_memory_base_pfn(reg);
+		unsigned long end = memblock_region_memory_end_pfn(reg);
+
+		if (start >= max)
+			continue;
+#ifdef CONFIG_ZONE_DMA32
+		if (start < max_dma32) {
+			unsigned long dma_end = min(end, max_dma32);
+			zhole_size[ZONE_DMA32] -= dma_end - start;
+		}
+#endif
+		if (end > max_dma32) {
+			unsigned long normal_end = min(end, max);
+			unsigned long normal_start = max(start, max_dma32);
+			zhole_size[ZONE_NORMAL] -= normal_end - normal_start;
+		}
+	}
+
+	free_area_init_node(0, zone_size, min, zhole_size);
+}
+
+#ifdef CONFIG_HAVE_ARCH_PFN_VALID
+int pfn_valid(unsigned long pfn)
+{
+	return memblock_is_memory(pfn << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+#ifndef CONFIG_SPARSEMEM
+static void arm64_memory_present(void)
+{
+}
+#else
+static void arm64_memory_present(void)
+{
+	struct memblock_region *reg;
+
+	for_each_memblock(memory, reg)
+		memory_present(0, memblock_region_memory_base_pfn(reg),
+			       memblock_region_memory_end_pfn(reg));
+}
+#endif
+
+void __init arm64_memblock_init(void)
+{
+	u64 *reserve_map, base, size;
+
+	/* Register the kernel text, kernel data and initrd with memblock */
+	memblock_reserve(__pa(_text), _end - _text);
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size) {
+		memblock_reserve(phys_initrd_start, phys_initrd_size);
+
+		/* Now convert initrd to virtual addresses */
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+#endif
+
+	/*
+	 * Reserve the page tables.  These are already in use,
+	 * and can only be in node 0.
+	 */
+	memblock_reserve(__pa(swapper_pg_dir), SWAPPER_DIR_SIZE);
+	memblock_reserve(__pa(idmap_pg_dir), IDMAP_DIR_SIZE);
+
+	/* Reserve the dtb region */
+	memblock_reserve(virt_to_phys(initial_boot_params),
+			 be32_to_cpu(initial_boot_params->totalsize));
+
+	/*
+	 * Process the reserve map.  This will probably overlap the initrd
+	 * and dtb locations which are already reserved, but overlapping
+	 * doesn't hurt anything
+	 */
+	reserve_map = ((void*)initial_boot_params) +
+			be32_to_cpu(initial_boot_params->off_mem_rsvmap);
+	while (1) {
+		base = be64_to_cpup(reserve_map++);
+		size = be64_to_cpup(reserve_map++);
+		if (!size)
+			break;
+		memblock_reserve(base, size);
+	}
+
+	memblock_allow_resize();
+	memblock_dump_all();
+}
+
+void __init bootmem_init(void)
+{
+	unsigned long min, max;
+
+	min = PFN_UP(memblock_start_of_DRAM());
+	max = PFN_DOWN(memblock_end_of_DRAM());
+
+	/*
+	 * Sparsemem tries to allocate bootmem in memory_present(), so must be
+	 * done after the fixed reservations.
+	 */
+	arm64_memory_present();
+
+	sparse_init();
+	zone_sizes_init(min, max);
+
+	high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
+	max_pfn = max_low_pfn = max;
+}
+
+static inline int free_area(unsigned long pfn, unsigned long end, char *s)
+{
+	unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10);
+
+	for (; pfn < end; pfn++) {
+		struct page *page = pfn_to_page(pfn);
+		ClearPageReserved(page);
+		init_page_count(page);
+		__free_page(page);
+		pages++;
+	}
+
+	if (size && s)
+		pr_info("Freeing %s memory: %dK\n", s, size);
+
+	return pages;
+}
+
+/*
+ * Poison init memory with an undefined instruction (0x0).
+ */
+static inline void poison_init_mem(void *s, size_t count)
+{
+	memset(s, 0, count);
+}
+
+#ifndef CONFIG_SPARSEMEM_VMEMMAP
+static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn)
+{
+	struct page *start_pg, *end_pg;
+	unsigned long pg, pgend;
+
+	/*
+	 * Convert start_pfn/end_pfn to a struct page pointer.
+	 */
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
+	end_pg = pfn_to_page(end_pfn - 1) + 1;
+
+	/*
+	 * Convert to physical addresses, and round start upwards and end
+	 * downwards.
+	 */
+	pg = (unsigned long)PAGE_ALIGN(__pa(start_pg));
+	pgend = (unsigned long)__pa(end_pg) & PAGE_MASK;
+
+	/*
+	 * If there are free pages between these, free the section of the
+	 * memmap array.
+	 */
+	if (pg < pgend)
+		free_bootmem(pg, pgend - pg);
+}
+
+/*
+ * The mem_map array can get very big. Free the unused area of the memory map.
+ */
+static void __init free_unused_memmap(void)
+{
+	unsigned long start, prev_end = 0;
+	struct memblock_region *reg;
+
+	for_each_memblock(memory, reg) {
+		start = __phys_to_pfn(reg->base);
+
+#ifdef CONFIG_SPARSEMEM
+		/*
+		 * Take care not to free memmap entries that don't exist due
+		 * to SPARSEMEM sections which aren't present.
+		 */
+		start = min(start, ALIGN(prev_end, PAGES_PER_SECTION));
+#endif
+		/*
+		 * If we had a previous bank, and there is a space between the
+		 * current bank and the previous, free it.
+		 */
+		if (prev_end && prev_end < start)
+			free_memmap(prev_end, start);
+
+		/*
+		 * Align up here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank end aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		prev_end = ALIGN(start + __phys_to_pfn(reg->size),
+				 MAX_ORDER_NR_PAGES);
+	}
+
+#ifdef CONFIG_SPARSEMEM
+	if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
+		free_memmap(prev_end, ALIGN(prev_end, PAGES_PER_SECTION));
+#endif
+}
+#endif	/* !CONFIG_SPARSEMEM_VMEMMAP */
+
+/*
+ * mem_init() marks the free areas in the mem_map and tells us how much memory
+ * is free.  This is done after various parts of the system have claimed their
+ * memory after the kernel image.
+ */
+void __init mem_init(void)
+{
+	unsigned long reserved_pages, free_pages;
+	struct memblock_region *reg;
+
+#if CONFIG_SWIOTLB
+	extern void __init arm64_swiotlb_init(size_t max_size);
+	arm64_swiotlb_init(max_pfn << (PAGE_SHIFT - 1));
+#endif
+
+	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
+
+#ifndef CONFIG_SPARSEMEM_VMEMMAP
+	/* this will put all unused low memory onto the freelists */
+	free_unused_memmap();
+#endif
+
+	totalram_pages += free_all_bootmem();
+
+	reserved_pages = free_pages = 0;
+
+	for_each_memblock(memory, reg) {
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = __phys_to_pfn(reg->base);
+		pfn2 = pfn1 + __phys_to_pfn(reg->size);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			if (PageReserved(page))
+				reserved_pages++;
+			else if (!page_count(page))
+				free_pages++;
+			page++;
+		} while (page < end);
+	}
+
+	/*
+	 * Since our memory may not be contiguous, calculate the real number
+	 * of pages we have in this system.
+	 */
+	pr_info("Memory:");
+	num_physpages = 0;
+	for_each_memblock(memory, reg) {
+		unsigned long pages = memblock_region_memory_end_pfn(reg) -
+			memblock_region_memory_base_pfn(reg);
+		num_physpages += pages;
+		printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
+	}
+	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
+
+	pr_notice("Memory: %luk/%luk available, %luk reserved\n",
+		  nr_free_pages() << (PAGE_SHIFT-10),
+		  free_pages << (PAGE_SHIFT-10),
+		  reserved_pages << (PAGE_SHIFT-10));
+
+#define MLK(b, t) b, t, ((t) - (b)) >> 10
+#define MLM(b, t) b, t, ((t) - (b)) >> 20
+#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
+
+	pr_notice("Virtual kernel memory layout:\n"
+		  "    vmalloc : 0x%16lx - 0x%16lx   (%6ld MB)\n"
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+		  "    vmemmap : 0x%16lx - 0x%16lx   (%6ld MB)\n"
+#endif
+		  "    modules : 0x%16lx - 0x%16lx   (%6ld MB)\n"
+		  "    memory  : 0x%16lx - 0x%16lx   (%6ld MB)\n"
+		  "      .init : 0x%p" " - 0x%p" "   (%6ld kB)\n"
+		  "      .text : 0x%p" " - 0x%p" "   (%6ld kB)\n"
+		  "      .data : 0x%p" " - 0x%p" "   (%6ld kB)\n",
+		  MLM(VMALLOC_START, VMALLOC_END),
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+		  MLM((unsigned long)virt_to_page(PAGE_OFFSET),
+		      (unsigned long)virt_to_page(high_memory)),
+#endif
+		  MLM(MODULES_VADDR, MODULES_END),
+		  MLM(PAGE_OFFSET, (unsigned long)high_memory),
+
+		  MLK_ROUNDUP(__init_begin, __init_end),
+		  MLK_ROUNDUP(_text, _etext),
+		  MLK_ROUNDUP(_sdata, _edata));
+
+#undef MLK
+#undef MLM
+#undef MLK_ROUNDUP
+
+	/*
+	 * Check boundaries twice: Some fundamental inconsistencies can be
+	 * detected at build time already.
+	 */
+#ifdef CONFIG_COMPAT
+	BUILD_BUG_ON(TASK_SIZE_32			> TASK_SIZE_64);
+#endif
+	BUILD_BUG_ON(TASK_SIZE_64			> MODULES_VADDR);
+	BUG_ON(TASK_SIZE_64				> MODULES_VADDR);
+
+	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
+		extern int sysctl_overcommit_memory;
+		/*
+		 * On a machine this small we won't get anywhere without
+		 * overcommit, so turn it on by default.
+		 */
+		sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
+	}
+}
+
+void free_initmem(void)
+{
+	poison_init_mem(__init_begin, __init_end - __init_begin);
+	totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
+				    __phys_to_pfn(__pa(__init_end)),
+				    "init");
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int keep_initrd;
+
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	if (!keep_initrd) {
+		poison_init_mem((void *)start, PAGE_ALIGN(end) - start);
+		totalram_pages += free_area(__phys_to_pfn(__pa(start)),
+					    __phys_to_pfn(__pa(end)),
+					    "initrd");
+	}
+}
+
+static int __init keepinitrd_setup(char *__unused)
+{
+	keep_initrd = 1;
+	return 1;
+}
+
+__setup("keepinitrd", keepinitrd_setup);
+#endif
diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c
new file mode 100644
index 000000000000..1725cd6db37a
--- /dev/null
+++ b/arch/arm64/mm/ioremap.c
@@ -0,0 +1,84 @@
+/*
+ * Based on arch/arm/mm/ioremap.c
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ * Hacked for ARM by Phil Blundell <philb@gnu.org>
+ * Hacked to allow all architectures to build, and various cleanups
+ * by Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+
+static void __iomem *__ioremap_caller(phys_addr_t phys_addr, size_t size,
+				      pgprot_t prot, void *caller)
+{
+	unsigned long last_addr;
+	unsigned long offset = phys_addr & ~PAGE_MASK;
+	int err;
+	unsigned long addr;
+	struct vm_struct *area;
+
+	/*
+	 * Page align the mapping address and size, taking account of any
+	 * offset.
+	 */
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(size + offset);
+
+	/*
+	 * Don't allow wraparound, zero size or outside PHYS_MASK.
+	 */
+	last_addr = phys_addr + size - 1;
+	if (!size || last_addr < phys_addr || (last_addr & ~PHYS_MASK))
+		return NULL;
+
+	/*
+	 * Don't allow RAM to be mapped.
+	 */
+	if (WARN_ON(pfn_valid(__phys_to_pfn(phys_addr))))
+		return NULL;
+
+	area = get_vm_area_caller(size, VM_IOREMAP, caller);
+	if (!area)
+		return NULL;
+	addr = (unsigned long)area->addr;
+
+	err = ioremap_page_range(addr, addr + size, phys_addr, prot);
+	if (err) {
+		vunmap((void *)addr);
+		return NULL;
+	}
+
+	return (void __iomem *)(offset + addr);
+}
+
+void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot)
+{
+	return __ioremap_caller(phys_addr, size, prot,
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(__ioremap);
+
+void __iounmap(volatile void __iomem *io_addr)
+{
+	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
+
+	vunmap(addr);
+}
+EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm64/mm/mm.h b/arch/arm64/mm/mm.h
new file mode 100644
index 000000000000..d8d6e7851c14
--- /dev/null
+++ b/arch/arm64/mm/mm.h
@@ -0,0 +1,2 @@
+extern void __flush_dcache_page(struct page *page);
+extern void __init bootmem_init(void);
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
new file mode 100644
index 000000000000..7c7be7855638
--- /dev/null
+++ b/arch/arm64/mm/mmap.c
@@ -0,0 +1,144 @@
+/*
+ * Based on arch/arm/mm/mmap.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/elf.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/export.h>
+#include <linux/shm.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+#include <linux/personality.h>
+#include <linux/random.h>
+
+#include <asm/cputype.h>
+
+/*
+ * Leave enough space between the mmap area and the stack to honour ulimit in
+ * the face of randomisation.
+ */
+#define MIN_GAP (SZ_128M + ((STACK_RND_MASK << PAGE_SHIFT) + 1))
+#define MAX_GAP	(STACK_TOP/6*5)
+
+static int mmap_is_legacy(void)
+{
+	if (current->personality & ADDR_COMPAT_LAYOUT)
+		return 1;
+
+	if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
+		return 1;
+
+	return sysctl_legacy_va_layout;
+}
+
+/*
+ * Since get_random_int() returns the same value within a 1 jiffy window, we
+ * will almost always get the same randomisation for the stack and mmap
+ * region. This will mean the relative distance between stack and mmap will be
+ * the same.
+ *
+ * To avoid this we can shift the randomness by 1 bit.
+ */
+static unsigned long mmap_rnd(void)
+{
+	unsigned long rnd = 0;
+
+	if (current->flags & PF_RANDOMIZE)
+		rnd = (long)get_random_int() & (STACK_RND_MASK >> 1);
+
+	return rnd << (PAGE_SHIFT + 1);
+}
+
+static unsigned long mmap_base(void)
+{
+	unsigned long gap = rlimit(RLIMIT_STACK);
+
+	if (gap < MIN_GAP)
+		gap = MIN_GAP;
+	else if (gap > MAX_GAP)
+		gap = MAX_GAP;
+
+	return PAGE_ALIGN(STACK_TOP - gap - mmap_rnd());
+}
+
+/*
+ * This function, called very early during the creation of a new process VM
+ * image, sets up which VM layout function to use:
+ */
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	/*
+	 * Fall back to the standard layout if the personality bit is set, or
+	 * if the expected stack growth is unlimited:
+	 */
+	if (mmap_is_legacy()) {
+		mm->mmap_base = TASK_UNMAPPED_BASE;
+		mm->get_unmapped_area = arch_get_unmapped_area;
+		mm->unmap_area = arch_unmap_area;
+	} else {
+		mm->mmap_base = mmap_base();
+		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+		mm->unmap_area = arch_unmap_area_topdown;
+	}
+}
+EXPORT_SYMBOL_GPL(arch_pick_mmap_layout);
+
+
+/*
+ * You really shouldn't be using read() or write() on /dev/mem.  This might go
+ * away in the future.
+ */
+int valid_phys_addr_range(unsigned long addr, size_t size)
+{
+	if (addr < PHYS_OFFSET)
+		return 0;
+	if (addr + size > __pa(high_memory - 1) + 1)
+		return 0;
+
+	return 1;
+}
+
+/*
+ * Do not allow /dev/mem mappings beyond the supported physical range.
+ */
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
+{
+	return !(((pfn << PAGE_SHIFT) + size) & ~PHYS_MASK);
+}
+
+#ifdef CONFIG_STRICT_DEVMEM
+
+#include <linux/ioport.h>
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain address
+ * is valid. The argument is a physical page number.  We mimic x86 here by
+ * disallowing access to system RAM as well as device-exclusive MMIO regions.
+ * This effectively disable read()/write() on /dev/mem.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+		return 0;
+	if (!page_is_ram(pfn))
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
new file mode 100644
index 000000000000..a6885d896ab6
--- /dev/null
+++ b/arch/arm64/mm/mmu.c
@@ -0,0 +1,395 @@
+/*
+ * Based on arch/arm/mm/mmu.c
+ *
+ * Copyright (C) 1995-2005 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/memblock.h>
+#include <linux/fs.h>
+
+#include <asm/cputype.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+#include "mm.h"
+
+/*
+ * Empty_zero_page is a special page that is used for zero-initialized data
+ * and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
+pgprot_t pgprot_default;
+EXPORT_SYMBOL(pgprot_default);
+
+static pmdval_t prot_sect_kernel;
+
+struct cachepolicy {
+	const char	policy[16];
+	u64		mair;
+	u64		tcr;
+};
+
+static struct cachepolicy cache_policies[] __initdata = {
+	{
+		.policy		= "uncached",
+		.mair		= 0x44,			/* inner, outer non-cacheable */
+		.tcr		= TCR_IRGN_NC | TCR_ORGN_NC,
+	}, {
+		.policy		= "writethrough",
+		.mair		= 0xaa,			/* inner, outer write-through, read-allocate */
+		.tcr		= TCR_IRGN_WT | TCR_ORGN_WT,
+	}, {
+		.policy		= "writeback",
+		.mair		= 0xee,			/* inner, outer write-back, read-allocate */
+		.tcr		= TCR_IRGN_WBnWA | TCR_ORGN_WBnWA,
+	}
+};
+
+/*
+ * These are useful for identifying cache coherency problems by allowing the
+ * cache or the cache and writebuffer to be turned off. It changes the Normal
+ * memory caching attributes in the MAIR_EL1 register.
+ */
+static int __init early_cachepolicy(char *p)
+{
+	int i;
+	u64 tmp;
+
+	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
+		int len = strlen(cache_policies[i].policy);
+
+		if (memcmp(p, cache_policies[i].policy, len) == 0)
+			break;
+	}
+	if (i == ARRAY_SIZE(cache_policies)) {
+		pr_err("ERROR: unknown or unsupported cache policy: %s\n", p);
+		return 0;
+	}
+
+	flush_cache_all();
+
+	/*
+	 * Modify MT_NORMAL attributes in MAIR_EL1.
+	 */
+	asm volatile(
+	"	mrs	%0, mair_el1\n"
+	"	bfi	%0, %1, #%2, #8\n"
+	"	msr	mair_el1, %0\n"
+	"	isb\n"
+	: "=&r" (tmp)
+	: "r" (cache_policies[i].mair), "i" (MT_NORMAL * 8));
+
+	/*
+	 * Modify TCR PTW cacheability attributes.
+	 */
+	asm volatile(
+	"	mrs	%0, tcr_el1\n"
+	"	bic	%0, %0, %2\n"
+	"	orr	%0, %0, %1\n"
+	"	msr	tcr_el1, %0\n"
+	"	isb\n"
+	: "=&r" (tmp)
+	: "r" (cache_policies[i].tcr), "r" (TCR_IRGN_MASK | TCR_ORGN_MASK));
+
+	flush_cache_all();
+
+	return 0;
+}
+early_param("cachepolicy", early_cachepolicy);
+
+/*
+ * Adjust the PMD section entries according to the CPU in use.
+ */
+static void __init init_mem_pgprot(void)
+{
+	pteval_t default_pgprot;
+	int i;
+
+	default_pgprot = PTE_ATTRINDX(MT_NORMAL);
+	prot_sect_kernel = PMD_TYPE_SECT | PMD_SECT_AF | PMD_ATTRINDX(MT_NORMAL);
+
+#ifdef CONFIG_SMP
+	/*
+	 * Mark memory with the "shared" attribute for SMP systems
+	 */
+	default_pgprot |= PTE_SHARED;
+	prot_sect_kernel |= PMD_SECT_S;
+#endif
+
+	for (i = 0; i < 16; i++) {
+		unsigned long v = pgprot_val(protection_map[i]);
+		protection_map[i] = __pgprot(v | default_pgprot);
+	}
+
+	pgprot_default = __pgprot(PTE_TYPE_PAGE | PTE_AF | default_pgprot);
+}
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (!pfn_valid(pfn))
+		return pgprot_noncached(vma_prot);
+	else if (file->f_flags & O_SYNC)
+		return pgprot_writecombine(vma_prot);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+
+static void __init *early_alloc(unsigned long sz)
+{
+	void *ptr = __va(memblock_alloc(sz, sz));
+	memset(ptr, 0, sz);
+	return ptr;
+}
+
+static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
+				  unsigned long end, unsigned long pfn)
+{
+	pte_t *pte;
+
+	if (pmd_none(*pmd)) {
+		pte = early_alloc(PTRS_PER_PTE * sizeof(pte_t));
+		__pmd_populate(pmd, __pa(pte), PMD_TYPE_TABLE);
+	}
+	BUG_ON(pmd_bad(*pmd));
+
+	pte = pte_offset_kernel(pmd, addr);
+	do {
+		set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
+		pfn++;
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+}
+
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+				  unsigned long end, phys_addr_t phys)
+{
+	pmd_t *pmd;
+	unsigned long next;
+
+	/*
+	 * Check for initial section mappings in the pgd/pud and remove them.
+	 */
+	if (pud_none(*pud) || pud_bad(*pud)) {
+		pmd = early_alloc(PTRS_PER_PMD * sizeof(pmd_t));
+		pud_populate(&init_mm, pud, pmd);
+	}
+
+	pmd = pmd_offset(pud, addr);
+	do {
+		next = pmd_addr_end(addr, end);
+		/* try section mapping first */
+		if (((addr | next | phys) & ~SECTION_MASK) == 0)
+			set_pmd(pmd, __pmd(phys | prot_sect_kernel));
+		else
+			alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys));
+		phys += next - addr;
+	} while (pmd++, addr = next, addr != end);
+}
+
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+				  unsigned long end, unsigned long phys)
+{
+	pud_t *pud = pud_offset(pgd, addr);
+	unsigned long next;
+
+	do {
+		next = pud_addr_end(addr, end);
+		alloc_init_pmd(pud, addr, next, phys);
+		phys += next - addr;
+	} while (pud++, addr = next, addr != end);
+}
+
+/*
+ * Create the page directory entries and any necessary page tables for the
+ * mapping specified by 'md'.
+ */
+static void __init create_mapping(phys_addr_t phys, unsigned long virt,
+				  phys_addr_t size)
+{
+	unsigned long addr, length, end, next;
+	pgd_t *pgd;
+
+	if (virt < VMALLOC_START) {
+		pr_warning("BUG: not creating mapping for 0x%016llx at 0x%016lx - outside kernel range\n",
+			   phys, virt);
+		return;
+	}
+
+	addr = virt & PAGE_MASK;
+	length = PAGE_ALIGN(size + (virt & ~PAGE_MASK));
+
+	pgd = pgd_offset_k(addr);
+	end = addr + length;
+	do {
+		next = pgd_addr_end(addr, end);
+		alloc_init_pud(pgd, addr, next, phys);
+		phys += next - addr;
+	} while (pgd++, addr = next, addr != end);
+}
+
+static void __init map_mem(void)
+{
+	struct memblock_region *reg;
+
+	/* map all the memory banks */
+	for_each_memblock(memory, reg) {
+		phys_addr_t start = reg->base;
+		phys_addr_t end = start + reg->size;
+
+		if (start >= end)
+			break;
+
+		create_mapping(start, __phys_to_virt(start), end - start);
+	}
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps and sets up the zero page.
+ */
+void __init paging_init(void)
+{
+	void *zero_page;
+
+	/*
+	 * Maximum PGDIR_SIZE addressable via the initial direct kernel
+	 * mapping in swapper_pg_dir.
+	 */
+	memblock_set_current_limit((PHYS_OFFSET & PGDIR_MASK) + PGDIR_SIZE);
+
+	init_mem_pgprot();
+	map_mem();
+
+	/*
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state.
+	 */
+	flush_cache_all();
+	flush_tlb_all();
+
+	/* allocate the zero page. */
+	zero_page = early_alloc(PAGE_SIZE);
+
+	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	__flush_dcache_page(empty_zero_page);
+
+	/*
+	 * TTBR0 is only used for the identity mapping at this stage. Make it
+	 * point to zero page to avoid speculatively fetching new entries.
+	 */
+	cpu_set_reserved_ttbr0();
+	flush_tlb_all();
+}
+
+/*
+ * Enable the identity mapping to allow the MMU disabling.
+ */
+void setup_mm_for_reboot(void)
+{
+	cpu_switch_mm(idmap_pg_dir, &init_mm);
+	flush_tlb_all();
+}
+
+/*
+ * Check whether a kernel address is valid (derived from arch/x86/).
+ */
+int kern_addr_valid(unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	if ((((long)addr) >> VA_BITS) != -1UL)
+		return 0;
+
+	pgd = pgd_offset_k(addr);
+	if (pgd_none(*pgd))
+		return 0;
+
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud))
+		return 0;
+
+	pmd = pmd_offset(pud, addr);
+	if (pmd_none(*pmd))
+		return 0;
+
+	pte = pte_offset_kernel(pmd, addr);
+	if (pte_none(*pte))
+		return 0;
+
+	return pfn_valid(pte_pfn(*pte));
+}
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+#ifdef CONFIG_ARM64_64K_PAGES
+int __meminit vmemmap_populate(struct page *start_page,
+			       unsigned long size, int node)
+{
+	return vmemmap_populate_basepages(start_page, size, node);
+}
+#else	/* !CONFIG_ARM64_64K_PAGES */
+int __meminit vmemmap_populate(struct page *start_page,
+			       unsigned long size, int node)
+{
+	unsigned long addr = (unsigned long)start_page;
+	unsigned long end = (unsigned long)(start_page + size);
+	unsigned long next;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+
+	do {
+		next = pmd_addr_end(addr, end);
+
+		pgd = vmemmap_pgd_populate(addr, node);
+		if (!pgd)
+			return -ENOMEM;
+
+		pud = vmemmap_pud_populate(pgd, addr, node);
+		if (!pud)
+			return -ENOMEM;
+
+		pmd = pmd_offset(pud, addr);
+		if (pmd_none(*pmd)) {
+			void *p = NULL;
+
+			p = vmemmap_alloc_block_buf(PMD_SIZE, node);
+			if (!p)
+				return -ENOMEM;
+
+			set_pmd(pmd, __pmd(__pa(p) | prot_sect_kernel));
+		} else
+			vmemmap_verify((pte_t *)pmd, node, addr, next);
+	} while (addr = next, addr != end);
+
+	return 0;
+}
+#endif	/* CONFIG_ARM64_64K_PAGES */
+#endif	/* CONFIG_SPARSEMEM_VMEMMAP */
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
new file mode 100644
index 000000000000..7083cdada657
--- /dev/null
+++ b/arch/arm64/mm/pgd.c
@@ -0,0 +1,54 @@
+/*
+ * PGD allocation/freeing
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/mm.h>
+#include <linux/gfp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+
+#include "mm.h"
+
+#define PGD_SIZE	(PTRS_PER_PGD * sizeof(pgd_t))
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *new_pgd;
+
+	if (PGD_SIZE == PAGE_SIZE)
+		new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+	else
+		new_pgd = kzalloc(PGD_SIZE, GFP_KERNEL);
+
+	if (!new_pgd)
+		return NULL;
+
+	return new_pgd;
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	if (PGD_SIZE == PAGE_SIZE)
+		free_page((unsigned long)pgd);
+	else
+		kfree(pgd);
+}
diff --git a/arch/arm64/mm/proc-macros.S b/arch/arm64/mm/proc-macros.S
new file mode 100644
index 000000000000..8957b822010b
--- /dev/null
+++ b/arch/arm64/mm/proc-macros.S
@@ -0,0 +1,55 @@
+/*
+ * Based on arch/arm/mm/proc-macros.S
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+	.macro	vma_vm_mm, rd, rn
+	ldr	\rd, [\rn, #VMA_VM_MM]
+	.endm
+
+/*
+ * mmid - get context id from mm pointer (mm->context.id)
+ */
+	.macro	mmid, rd, rn
+	ldr	\rd, [\rn, #MM_CONTEXT_ID]
+	.endm
+
+/*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register.
+ */
+	.macro	dcache_line_size, reg, tmp
+	mrs	\tmp, ctr_el0			// read CTR
+	lsr	\tmp, \tmp, #16
+	and	\tmp, \tmp, #0xf		// cache line size encoding
+	mov	\reg, #4			// bytes per word
+	lsl	\reg, \reg, \tmp		// actual cache line size
+	.endm
+
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register.
+ */
+	.macro	icache_line_size, reg, tmp
+	mrs	\tmp, ctr_el0			// read CTR
+	and	\tmp, \tmp, #0xf		// cache line size encoding
+	mov	\reg, #4			// bytes per word
+	lsl	\reg, \reg, \tmp		// actual cache line size
+	.endm
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
new file mode 100644
index 000000000000..f1d8b9bbfdad
--- /dev/null
+++ b/arch/arm64/mm/proc.S
@@ -0,0 +1,175 @@
+/*
+ * Based on arch/arm/mm/proc.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+
+#include "proc-macros.S"
+
+#ifndef CONFIG_SMP
+/* PTWs cacheable, inner/outer WBWA not shareable */
+#define TCR_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA
+#else
+/* PTWs cacheable, inner/outer WBWA shareable */
+#define TCR_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA | TCR_SHARED
+#endif
+
+#define MAIR(attr, mt)	((attr) << ((mt) * 8))
+
+/*
+ *	cpu_cache_off()
+ *
+ *	Turn the CPU D-cache off.
+ */
+ENTRY(cpu_cache_off)
+	mrs	x0, sctlr_el1
+	bic	x0, x0, #1 << 2			// clear SCTLR.C
+	msr	sctlr_el1, x0
+	isb
+	ret
+ENDPROC(cpu_cache_off)
+
+/*
+ *	cpu_reset(loc)
+ *
+ *	Perform a soft reset of the system.  Put the CPU into the same state
+ *	as it would be if it had been reset, and branch to what would be the
+ *	reset vector. It must be executed with the flat identity mapping.
+ *
+ *	- loc   - location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_reset)
+	mrs	x1, sctlr_el1
+	bic	x1, x1, #1
+	msr	sctlr_el1, x1			// disable the MMU
+	isb
+	ret	x0
+ENDPROC(cpu_reset)
+
+/*
+ *	cpu_do_idle()
+ *
+ *	Idle the processor (wait for interrupt).
+ */
+ENTRY(cpu_do_idle)
+	dsb	sy				// WFI may enter a low-power mode
+	wfi
+	ret
+ENDPROC(cpu_do_idle)
+
+/*
+ *	cpu_switch_mm(pgd_phys, tsk)
+ *
+ *	Set the translation table base pointer to be pgd_phys.
+ *
+ *	- pgd_phys - physical address of new TTB
+ */
+ENTRY(cpu_do_switch_mm)
+	mmid	w1, x1				// get mm->context.id
+	bfi	x0, x1, #48, #16		// set the ASID
+	msr	ttbr0_el1, x0			// set TTBR0
+	isb
+	ret
+ENDPROC(cpu_do_switch_mm)
+
+cpu_name:
+	.ascii	"AArch64 Processor"
+	.align
+
+	.section ".text.init", #alloc, #execinstr
+
+/*
+ *	__cpu_setup
+ *
+ *	Initialise the processor for turning the MMU on.  Return in x0 the
+ *	value of the SCTLR_EL1 register.
+ */
+ENTRY(__cpu_setup)
+	/*
+	 * Preserve the link register across the function call.
+	 */
+	mov	x28, lr
+	bl	__flush_dcache_all
+	mov	lr, x28
+	ic	iallu				// I+BTB cache invalidate
+	dsb	sy
+
+	mov	x0, #3 << 20
+	msr	cpacr_el1, x0			// Enable FP/ASIMD
+	mov	x0, #1
+	msr	oslar_el1, x0			// Set the debug OS lock
+	tlbi	vmalle1is			// invalidate I + D TLBs
+	/*
+	 * Memory region attributes for LPAE:
+	 *
+	 *   n = AttrIndx[2:0]
+	 *			n	MAIR
+	 *   DEVICE_nGnRnE	000	00000000
+	 *   DEVICE_nGnRE	001	00000100
+	 *   DEVICE_GRE		010	00001100
+	 *   NORMAL_NC		011	01000100
+	 *   NORMAL		100	11111111
+	 */
+	ldr	x5, =MAIR(0x00, MT_DEVICE_nGnRnE) | \
+		     MAIR(0x04, MT_DEVICE_nGnRE) | \
+		     MAIR(0x0c, MT_DEVICE_GRE) | \
+		     MAIR(0x44, MT_NORMAL_NC) | \
+		     MAIR(0xff, MT_NORMAL)
+	msr	mair_el1, x5
+	/*
+	 * Prepare SCTLR
+	 */
+	adr	x5, crval
+	ldp	w5, w6, [x5]
+	mrs	x0, sctlr_el1
+	bic	x0, x0, x5			// clear bits
+	orr	x0, x0, x6			// set bits
+	/*
+	 * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
+	 * both user and kernel.
+	 */
+	ldr	x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT | \
+		      TCR_ASID16 | (1 << 31)
+#ifdef CONFIG_ARM64_64K_PAGES
+	orr	x10, x10, TCR_TG0_64K
+	orr	x10, x10, TCR_TG1_64K
+#endif
+	msr	tcr_el1, x10
+	ret					// return to head.S
+ENDPROC(__cpu_setup)
+
+	/*
+	 *                 n n            T
+	 *       U E      WT T UD     US IHBS
+	 *       CE0      XWHW CZ     ME TEEA S
+	 * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM
+	 * 0011 0... 1101 ..0. ..0. 10.. .... .... < hardware reserved
+	 * .... .100 .... 01.1 11.1 ..01 0001 1101 < software settings
+	 */
+	.type	crval, #object
+crval:
+	.word	0x030802e2			// clear
+	.word	0x0405d11d			// set
diff --git a/arch/arm64/mm/tlb.S b/arch/arm64/mm/tlb.S
new file mode 100644
index 000000000000..8ae80a18e8ec
--- /dev/null
+++ b/arch/arm64/mm/tlb.S
@@ -0,0 +1,71 @@
+/*
+ * Based on arch/arm/mm/tlb.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+/*
+ *	__cpu_flush_user_tlb_range(start, end, vma)
+ *
+ *	Invalidate a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- vma   - vma_struct describing address range
+ */
+ENTRY(__cpu_flush_user_tlb_range)
+	vma_vm_mm x3, x2			// get vma->vm_mm
+	mmid	x3, x3				// get vm_mm->context.id
+	dsb	sy
+	lsr	x0, x0, #12			// align address
+	lsr	x1, x1, #12
+	bfi	x0, x3, #48, #16		// start VA and ASID
+	bfi	x1, x3, #48, #16		// end VA and ASID
+1:	tlbi	vae1is, x0			// TLB invalidate by address and ASID
+	add	x0, x0, #1
+	cmp	x0, x1
+	b.lo	1b
+	dsb	sy
+	ret
+ENDPROC(__cpu_flush_user_tlb_range)
+
+/*
+ *	__cpu_flush_kern_tlb_range(start,end)
+ *
+ *	Invalidate a range of kernel TLB entries.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ */
+ENTRY(__cpu_flush_kern_tlb_range)
+	dsb	sy
+	lsr	x0, x0, #12			// align address
+	lsr	x1, x1, #12
+1:	tlbi	vaae1is, x0			// TLB invalidate by address
+	add	x0, x0, #1
+	cmp	x0, x1
+	b.lo	1b
+	dsb	sy
+	isb
+	ret
+ENDPROC(__cpu_flush_kern_tlb_range)
diff --git a/arch/avr32/include/asm/elf.h b/arch/avr32/include/asm/elf.h
index 3b3159b710d4..e2c328739808 100644
--- a/arch/avr32/include/asm/elf.h
+++ b/arch/avr32/include/asm/elf.h
@@ -102,6 +102,7 @@ typedef struct user_fpu_struct elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
 
 #endif /* __ASM_AVR32_ELF_H */
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f34861920634..c7092e6057c5 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -38,6 +38,7 @@ config BLACKFIN
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU if SMP
+	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
 	select GENERIC_SMP_IDLE_THREAD
 	select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index d3d7e64ca96d..66cf00095b84 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -20,7 +20,6 @@ endif
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
 KBUILD_CFLAGS_MODULE    += -mlong-calls
 LDFLAGS                 += -m elf32bfin
-KALLSYMS         += --symbol-prefix=_
 
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index e6c6812a9abd..14bc98ff668f 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -132,6 +132,7 @@ do {											\
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index dc3d144b4bb5..9631598dcc5d 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -18,6 +18,8 @@
 #define raw_smp_processor_id()  blackfin_core_id()
 
 extern void bfin_relocate_coreb_l1_mem(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
 asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr);
diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/blackfin/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index ada8f0fc71e4..fb96e607adcf 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on);
 #ifdef CONFIG_MTD_UCLINUX
 extern struct map_info uclinux_ram_map;
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
-unsigned long _ebss;
 EXPORT_SYMBOL(memory_mtd_end);
 EXPORT_SYMBOL(memory_mtd_start);
 EXPORT_SYMBOL(mtd_size);
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 00bbe672b3b3..a40151306b77 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -48,10 +48,13 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS];
 
 struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
 
-#define BFIN_IPI_TIMER	      0
-#define BFIN_IPI_RESCHEDULE   1
-#define BFIN_IPI_CALL_FUNC    2
-#define BFIN_IPI_CPU_STOP     3
+enum ipi_message_type {
+	BFIN_IPI_TIMER,
+	BFIN_IPI_RESCHEDULE,
+	BFIN_IPI_CALL_FUNC,
+	BFIN_IPI_CALL_FUNC_SINGLE,
+	BFIN_IPI_CPU_STOP,
+};
 
 struct blackfin_flush_data {
 	unsigned long start;
@@ -60,35 +63,20 @@ struct blackfin_flush_data {
 
 void *secondary_stack;
 
-
-struct smp_call_struct {
-	void (*func)(void *info);
-	void *info;
-	int wait;
-	cpumask_t *waitmask;
-};
-
 static struct blackfin_flush_data smp_flush_data;
 
 static DEFINE_SPINLOCK(stop_lock);
 
-struct ipi_message {
-	unsigned long type;
-	struct smp_call_struct call_struct;
-};
-
 /* A magic number - stress test shows this is safe for common cases */
 #define BFIN_IPI_MSGQ_LEN 5
 
 /* Simple FIFO buffer, overflow leads to panic */
-struct ipi_message_queue {
-	spinlock_t lock;
+struct ipi_data {
 	unsigned long count;
-	unsigned long head; /* head of the queue */
-	struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN];
+	unsigned long bits;
 };
 
-static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue);
+static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
 
 static void ipi_cpu_stop(unsigned int cpu)
 {
@@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info)
 	blackfin_icache_flush_range(fdata->start, fdata->end);
 }
 
-static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
-{
-	int wait;
-	void (*func)(void *info);
-	void *info;
-	func = msg->call_struct.func;
-	info = msg->call_struct.info;
-	wait = msg->call_struct.wait;
-	func(info);
-	if (wait) {
-#ifdef __ARCH_SYNC_CORE_DCACHE
-		/*
-		 * 'wait' usually means synchronization between CPUs.
-		 * Invalidate D cache in case shared data was changed
-		 * by func() to ensure cache coherence.
-		 */
-		resync_core_dcache();
-#endif
-		cpumask_clear_cpu(cpu, msg->call_struct.waitmask);
-	}
-}
-
 /* Use IRQ_SUPPLE_0 to request reschedule.
  * When returning from interrupt to user space,
  * there is chance to reschedule */
@@ -172,152 +138,95 @@ void ipi_timer(void)
 
 static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 {
-	struct ipi_message *msg;
-	struct ipi_message_queue *msg_queue;
+	struct ipi_data *bfin_ipi_data;
 	unsigned int cpu = smp_processor_id();
-	unsigned long flags;
+	unsigned long pending;
+	unsigned long msg;
 
 	platform_clear_ipi(cpu, IRQ_SUPPLE_1);
 
-	msg_queue = &__get_cpu_var(ipi_msg_queue);
-
-	spin_lock_irqsave(&msg_queue->lock, flags);
-
-	while (msg_queue->count) {
-		msg = &msg_queue->ipi_message[msg_queue->head];
-		switch (msg->type) {
-		case BFIN_IPI_TIMER:
-			ipi_timer();
-			break;
-		case BFIN_IPI_RESCHEDULE:
-			scheduler_ipi();
-			break;
-		case BFIN_IPI_CALL_FUNC:
-			ipi_call_function(cpu, msg);
-			break;
-		case BFIN_IPI_CPU_STOP:
-			ipi_cpu_stop(cpu);
-			break;
-		default:
-			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
-			       cpu, msg->type);
-			break;
-		}
-		msg_queue->head++;
-		msg_queue->head %= BFIN_IPI_MSGQ_LEN;
-		msg_queue->count--;
+	bfin_ipi_data = &__get_cpu_var(bfin_ipi);
+
+	while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) {
+		msg = 0;
+		do {
+			msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1);
+			switch (msg) {
+			case BFIN_IPI_TIMER:
+				ipi_timer();
+				break;
+			case BFIN_IPI_RESCHEDULE:
+				scheduler_ipi();
+				break;
+			case BFIN_IPI_CALL_FUNC:
+				generic_smp_call_function_interrupt();
+				break;
+
+			case BFIN_IPI_CALL_FUNC_SINGLE:
+				generic_smp_call_function_single_interrupt();
+				break;
+
+			case BFIN_IPI_CPU_STOP:
+				ipi_cpu_stop(cpu);
+				break;
+			}
+		} while (msg < BITS_PER_LONG);
+
+		smp_mb();
 	}
-	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	return IRQ_HANDLED;
 }
 
-static void ipi_queue_init(void)
+static void bfin_ipi_init(void)
 {
 	unsigned int cpu;
-	struct ipi_message_queue *msg_queue;
+	struct ipi_data *bfin_ipi_data;
 	for_each_possible_cpu(cpu) {
-		msg_queue = &per_cpu(ipi_msg_queue, cpu);
-		spin_lock_init(&msg_queue->lock);
-		msg_queue->count = 0;
-		msg_queue->head = 0;
+		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+		bfin_ipi_data->bits = 0;
+		bfin_ipi_data->count = 0;
 	}
 }
 
-static inline void smp_send_message(cpumask_t callmap, unsigned long type,
-					void (*func) (void *info), void *info, int wait)
+void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
 {
 	unsigned int cpu;
-	struct ipi_message_queue *msg_queue;
-	struct ipi_message *msg;
-	unsigned long flags, next_msg;
-	cpumask_t waitmask; /* waitmask is shared by all cpus */
-
-	cpumask_copy(&waitmask, &callmap);
-	for_each_cpu(cpu, &callmap) {
-		msg_queue = &per_cpu(ipi_msg_queue, cpu);
-		spin_lock_irqsave(&msg_queue->lock, flags);
-		if (msg_queue->count < BFIN_IPI_MSGQ_LEN) {
-			next_msg = (msg_queue->head + msg_queue->count)
-					% BFIN_IPI_MSGQ_LEN;
-			msg = &msg_queue->ipi_message[next_msg];
-			msg->type = type;
-			if (type == BFIN_IPI_CALL_FUNC) {
-				msg->call_struct.func = func;
-				msg->call_struct.info = info;
-				msg->call_struct.wait = wait;
-				msg->call_struct.waitmask = &waitmask;
-			}
-			msg_queue->count++;
-		} else
-			panic("IPI message queue overflow\n");
-		spin_unlock_irqrestore(&msg_queue->lock, flags);
+	struct ipi_data *bfin_ipi_data;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for_each_cpu(cpu, cpumask) {
+		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+		smp_mb();
+		set_bit(msg, &bfin_ipi_data->bits);
+		bfin_ipi_data->count++;
 		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
 	}
 
-	if (wait) {
-		while (!cpumask_empty(&waitmask))
-			blackfin_dcache_invalidate_range(
-				(unsigned long)(&waitmask),
-				(unsigned long)(&waitmask));
-#ifdef __ARCH_SYNC_CORE_DCACHE
-		/*
-		 * Invalidate D cache in case shared data was changed by
-		 * other processors to ensure cache coherence.
-		 */
-		resync_core_dcache();
-#endif
-	}
+	local_irq_restore(flags);
 }
 
-int smp_call_function(void (*func)(void *info), void *info, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	cpumask_t callmap;
-
-	preempt_disable();
-	cpumask_copy(&callmap, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), &callmap);
-	if (!cpumask_empty(&callmap))
-		smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
-	preempt_enable();
-
-	return 0;
+	send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL_GPL(smp_call_function);
 
-int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
-				int wait)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
-	unsigned int cpu = cpuid;
-	cpumask_t callmap;
-
-	if (cpu_is_offline(cpu))
-		return 0;
-	cpumask_clear(&callmap);
-	cpumask_set_cpu(cpu, &callmap);
-
-	smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
-	return 0;
+	send_ipi(mask, BFIN_IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL_GPL(smp_call_function_single);
 
 void smp_send_reschedule(int cpu)
 {
-	cpumask_t callmap;
-	/* simply trigger an ipi */
-
-	cpumask_clear(&callmap);
-	cpumask_set_cpu(cpu, &callmap);
-
-	smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0);
+	send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE);
 
 	return;
 }
 
 void smp_send_msg(const struct cpumask *mask, unsigned long type)
 {
-	smp_send_message(*mask, type, NULL, NULL, 0);
+	send_ipi(mask, type);
 }
 
 void smp_timer_broadcast(const struct cpumask *mask)
@@ -333,7 +242,7 @@ void smp_send_stop(void)
 	cpumask_copy(&callmap, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &callmap);
 	if (!cpumask_empty(&callmap))
-		smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0);
+		send_ipi(&callmap, BFIN_IPI_CPU_STOP);
 
 	preempt_enable();
 
@@ -436,7 +345,7 @@ void __init smp_prepare_boot_cpu(void)
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	platform_prepare_cpus(max_cpus);
-	ipi_queue_init();
+	bfin_ipi_init();
 	platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0);
 	platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1);
 }
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 052f81a76239..983c859e40b7 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -6,6 +6,7 @@
 config C6X
 	def_bool y
 	select CLKDEV_LOOKUP
+	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index 1d08dd070277..a9eb9597e03c 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -6,6 +6,8 @@
 # for more details.
 #
 
+KBUILD_DEFCONFIG := dsk6455_defconfig
+
 cflags-y += -mno-dsbt -msdata=none
 
 cflags-$(CONFIG_C6X_BIG_KERNEL) += -mlong-calls
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index 3af601e31e66..277f1a4ecb09 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -2,6 +2,7 @@ include include/asm-generic/Kbuild.asm
 
 generic-y += atomic.h
 generic-y += auxvec.h
+generic-y += barrier.h
 generic-y += bitsperlong.h
 generic-y += bugs.h
 generic-y += cputime.h
@@ -39,6 +40,7 @@ generic-y += sembuf.h
 generic-y += shmbuf.h
 generic-y += shmparam.h
 generic-y += siginfo.h
+generic-y += signal.h
 generic-y += socket.h
 generic-y += sockios.h
 generic-y += stat.h
diff --git a/arch/c6x/include/asm/barrier.h b/arch/c6x/include/asm/barrier.h
deleted file mode 100644
index 538240e85909..000000000000
--- a/arch/c6x/include/asm/barrier.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  Port on Texas Instruments TMS320C6x architecture
- *
- *  Copyright (C) 2004, 2009, 2010, 2011 Texas Instruments Incorporated
- *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#ifndef _ASM_C6X_BARRIER_H
-#define _ASM_C6X_BARRIER_H
-
-#define nop()                    asm("NOP\n");
-
-#define mb()                     barrier()
-#define rmb()                    barrier()
-#define wmb()                    barrier()
-#define set_mb(var, value)       do { var = value;  mb(); } while (0)
-#define set_wmb(var, value)      do { var = value; wmb(); } while (0)
-
-#define smp_mb()	         barrier()
-#define smp_rmb()	         barrier()
-#define smp_wmb()	         barrier()
-#define smp_read_barrier_depends()	do { } while (0)
-
-#endif /* _ASM_C6X_BARRIER_H */
diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h
index 6d521d96d941..09c5a0f5f4d1 100644
--- a/arch/c6x/include/asm/cache.h
+++ b/arch/c6x/include/asm/cache.h
@@ -1,7 +1,7 @@
 /*
  *  Port on Texas Instruments TMS320C6x architecture
  *
- *  Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated
+ *  Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated
  *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -16,9 +16,14 @@
 /*
  * Cache line size
  */
-#define L1D_CACHE_BYTES   64
-#define L1P_CACHE_BYTES   32
-#define L2_CACHE_BYTES	  128
+#define L1D_CACHE_SHIFT   6
+#define L1D_CACHE_BYTES   (1 << L1D_CACHE_SHIFT)
+
+#define L1P_CACHE_SHIFT   5
+#define L1P_CACHE_BYTES   (1 << L1P_CACHE_SHIFT)
+
+#define L2_CACHE_SHIFT    7
+#define L2_CACHE_BYTES    (1 << L2_CACHE_SHIFT)
 
 /*
  * L2 used as cache
@@ -29,7 +34,8 @@
  * For practical reasons the L1_CACHE_BYTES defines should not be smaller than
  * the L2 line size
  */
-#define L1_CACHE_BYTES        L2_CACHE_BYTES
+#define L1_CACHE_SHIFT        L2_CACHE_SHIFT
+#define L1_CACHE_BYTES        (1 << L1_CACHE_SHIFT)
 
 #define L2_CACHE_ALIGN_LOW(x) \
 	(((x) & ~(L2_CACHE_BYTES - 1)))
diff --git a/arch/c6x/include/asm/elf.h b/arch/c6x/include/asm/elf.h
index f4552db20b4a..32b997126adf 100644
--- a/arch/c6x/include/asm/elf.h
+++ b/arch/c6x/include/asm/elf.h
@@ -77,7 +77,8 @@ do {								\
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 /* C6X specific section types */
 #define SHT_C6000_UNWIND	0x70000001
diff --git a/arch/c6x/include/asm/signal.h b/arch/c6x/include/asm/signal.h
deleted file mode 100644
index f1cd870596a3..000000000000
--- a/arch/c6x/include/asm/signal.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_C6X_SIGNAL_H
-#define _ASM_C6X_SIGNAL_H
-
-#include <asm-generic/signal.h>
-
-#ifndef __ASSEMBLY__
-#include <linux/linkage.h>
-
-struct pt_regs;
-
-extern asmlinkage int do_rt_sigreturn(struct pt_regs *regs);
-extern asmlinkage void do_notify_resume(struct pt_regs *regs,
-					u32 thread_info_flags,
-					int syscall);
-#endif
-
-#endif /* _ASM_C6X_SIGNAL_H */
diff --git a/arch/c6x/include/asm/unistd.h b/arch/c6x/include/asm/unistd.h
index 6d54ea4262eb..ed2259043eec 100644
--- a/arch/c6x/include/asm/unistd.h
+++ b/arch/c6x/include/asm/unistd.h
@@ -13,8 +13,6 @@
  *   NON INFRINGEMENT.	See the GNU General Public License for
  *   more details.
  */
-#if !defined(_ASM_C6X_UNISTD_H) || defined(__SYSCALL)
-#define _ASM_C6X_UNISTD_H
 
 /* Use the standard ABI for syscalls. */
 #include <asm-generic/unistd.h>
@@ -22,5 +20,3 @@
 /* C6X-specific syscalls. */
 #define __NR_cache_sync	(__NR_arch_specific_syscall + 0)
 __SYSCALL(__NR_cache_sync, sys_cache_sync)
-
-#endif /* _ASM_C6X_UNISTD_H */
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index e92215428a37..72bd5ae50a89 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -138,11 +138,6 @@ config CRIS_MACH_ARTPEC3
 
 endchoice
 
-config ETRAX_VCS_SIM
-	bool "VCS Simulator"
-	help
-	  Setup hardware to be run in the VCS simulator.
-
 config ETRAX_ARCH_V10
        bool
        default y if ETRAX100LX || ETRAX100LX_V2
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 29c2ceb38a76..39dc7d00083e 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -23,7 +23,9 @@ mach-$(CONFIG_ETRAXFS) := fs
 
 ifneq ($(arch-y),)
 SARCH := arch-$(arch-y)
-inc := -Iarch/cris/include/$(SARCH)
+inc := -Iarch/cris/include/uapi/$(SARCH)
+inc += -Iarch/cris/include/$(SARCH)
+inc += -Iarch/cris/include/uapi/$(SARCH)/arch
 inc += -Iarch/cris/include/$(SARCH)/arch
 else
 SARCH :=
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index b34438e026be..1b6ad6247204 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -329,7 +329,6 @@ static int __init init_axis_flash(void)
 	}
 #endif
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	main_mtd = flash_probe();
 	if (main_mtd)
 		printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n",
@@ -603,34 +602,7 @@ static int __init init_axis_flash(void)
 					"partition %d\n", part);
 		}
 	}
-#endif /* CONFIG_EXTRAX_VCS_SIM */
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-	/* For simulator, always use a RAM partition.
-	 * The rootfs will be found after the kernel in RAM,
-	 * with romfs_start and romfs_end indicating location and size.
-	 */
-	struct mtd_info *mtd_ram;
-
-	mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-	if (!mtd_ram) {
-		panic("axisflashmap: Couldn't allocate memory for "
-		      "mtd_info!\n");
-	}
-
-	printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, "
-	       "at %u, size %u\n",
-	       (unsigned) romfs_start, (unsigned) romfs_length);
-
-	err = mtdram_init_device(mtd_ram, (void *)romfs_start,
-				 romfs_length, "romfs");
-	if (err) {
-		panic("axisflashmap: Could not initialize MTD RAM "
-		      "device!\n");
-	}
-#endif /* CONFIG_EXTRAX_VCS_SIM */
-
-#ifndef CONFIG_ETRAX_VCS_SIM
 	if (aux_mtd) {
 		aux_partition.size = aux_mtd->size;
 		err = mtd_device_register(aux_mtd, &aux_partition, 1);
@@ -639,7 +611,6 @@ static int __init init_axis_flash(void)
 			      "aux mtd device!\n");
 
 	}
-#endif /* CONFIG_EXTRAX_VCS_SIM */
 
 	return err;
 }
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 5b1ee82f63c5..e3dfc72d0cfd 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -97,28 +97,3 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 		pcibios_enable_irq(dev);
 	return 0;
 }
-
-int pcibios_assign_resources(void)
-{
-	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
-
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for(idx=0; idx<6; idx++) {
-			r = &dev->resource[idx];
-
-			if (!r->start && r->end)
-				pci_assign_resource(dev, idx);
-		}
-	}
-	return 0;
-}
-
-EXPORT_SYMBOL(pcibios_assign_resources);
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index 5d502b9ab56d..51e34165ece7 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -36,13 +36,6 @@
 	.global nand_boot
 	.global swapper_pg_dir
 
-	;; Dummy section to make it bootable with current VCS simulator
-#ifdef CONFIG_ETRAX_VCS_SIM
-	.section ".boot", "ax"
-	ba tstart
-	nop
-#endif
-
 	.text
 tstart:
 	;; This is the entry point of the kernel. The CPU is currently in
@@ -75,17 +68,10 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5)     \
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #else
-	;; Map the virtual DRAM to the RW eprom area at address 0.
-	;; Also map 0xa for the hook calls,
 	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb)   \
-		| REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #endif
 
 	;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
@@ -126,27 +112,6 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, inv, on)		\
-		| REG_STATE(mmu, rw_mm_cfg, seg_f, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_e, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_d, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_6, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_5, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_4, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_3, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
 #else
 	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
 		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
@@ -157,7 +122,7 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 		| REG_STATE(mmu, rw_mm_cfg, seg_d, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
-		| REG_STATE(mmu, rw_mm_cfg, seg_a, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
 		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
@@ -226,7 +191,6 @@ master_cpu:
 	move.d secondary_cpu_entry, $r1
 	move.d $r1, [$r0]
 #endif
-#ifndef CONFIG_ETRAX_VCS_SIM
 	; Check if starting from DRAM (network->RAM boot or unpacked
 	; compressed kernel), or directly from flash.
 	lapcq	., $r0
@@ -234,7 +198,6 @@ master_cpu:
 	cmp.d	0x10000, $r0	; Arbitrary, something above this code.
 	blo	_inflash0
 	nop
-#endif
 
 	jump	_inram		; Jump to cached RAM.
 	nop
@@ -326,7 +289,6 @@ move_cramfs:
 	move.d	romfs_length, $r1
 	move.d	$r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	;; The kernel could have been unpacked to DRAM by the loader, but
 	;; the cramfs image could still be in the flash immediately
 	;; following the compressed kernel image. The loader passes the address
@@ -335,10 +297,6 @@ move_cramfs:
 	cmp.d	0x0ffffff8, $r9
 	bhs	_no_romfs_in_flash ; R9 points outside the flash area.
 	nop
-#else
-	ba _no_romfs_in_flash
-	nop
-#endif
 	;; cramfs rootfs might to be in flash. Check for it.
 	move.d	[$r9], $r0	; cramfs_super.magic
 	cmp.d	CRAMFS_MAGIC, $r0
@@ -396,7 +354,6 @@ _no_romfs_in_flash:
 	move.d	romfs_length, $r3
 	move.d	$r2, [$r3]	; store size at romfs_length
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	add.d	$r2, $r0	; copy from end and downwards
 	add.d	$r2, $r1
 
@@ -410,7 +367,6 @@ _no_romfs_in_flash:
 	subq	1, $r2
 	bne	1b
 	nop
-#endif
 
 4:
 	;; BSS move done.
@@ -455,7 +411,6 @@ no_command_line:
 	move.d	etrax_irv, $r1	; Set the exception base register and pointer.
 	move.d	$r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
 	;; Clear the BSS region from _bss_start to _end.
 	move.d	__bss_start, $r0
 	move.d	_end, $r1
@@ -463,15 +418,6 @@ no_command_line:
 	cmp.d	$r1, $r0
 	blo 1b
 	nop
-#endif
-
-#ifdef CONFIG_ETRAX_VCS_SIM
-	/* Set the watchdog timeout to something big. Will be removed when */
-	/* watchdog can be disabled with command line option */
-	move.d  0x7fffffff, $r10
-	jsr     CPU_WATCHDOG_TIMEOUT
-	nop
-#endif
 
 	; Initialize registers to increase determinism
 	move.d __bss_start, $r0
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 8c1d35cdf00a..b06813aeb120 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -381,23 +381,9 @@ static int read_register(char regno, unsigned int *valptr);
 /* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
 int getDebugChar(void);
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-int getDebugChar(void)
-{
-  return socketread();
-}
-#endif
-
 /* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
 void putDebugChar(int val);
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-void putDebugChar(int val)
-{
-  socketwrite((char *)&val, 1);
-}
-#endif
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile
index 41fa6a6893a9..d366e0891988 100644
--- a/arch/cris/arch-v32/mach-a3/Makefile
+++ b/arch/cris/arch-v32/mach-a3/Makefile
@@ -1,10 +1,8 @@
-# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o
 obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
diff --git a/arch/cris/arch-v32/mach-a3/vcs_hook.c b/arch/cris/arch-v32/mach-a3/vcs_hook.c
deleted file mode 100644
index 58b1a5469fd7..000000000000
--- a/arch/cris/arch-v32/mach-a3/vcs_hook.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Simulator hook mechanism
- */
-
-#include "vcs_hook.h"
-#include <asm/io.h>
-#include <stdarg.h>
-
-#define HOOK_TRIG_ADDR      0xb7000000
-#define HOOK_MEM_BASE_ADDR  0xce000000
-
-static volatile unsigned *hook_base;
-
-#define HOOK_DATA(offset) hook_base[offset]
-#define VHOOK_DATA(offset) hook_base[offset]
-#define HOOK_TRIG(funcid) \
-	do { \
-		*((unsigned *) HOOK_TRIG_ADDR) = funcid; \
-	} while (0)
-#define HOOK_DATA_BYTE(offset) ((unsigned char *)hook_base)[offset]
-
-static void hook_init(void)
-{
-	static int first = 1;
-	if (first) {
-		first = 0;
-		hook_base = ioremap(HOOK_MEM_BASE_ADDR, 8192);
-	}
-}
-
-static unsigned hook_trig(unsigned id)
-{
-	unsigned ret;
-
-	/* preempt_disable(); */
-
-	/* Dummy read from mem to make sure data has propagated to memory
-	 * before trigging */
-	ret = *hook_base;
-
-	/* trigger hook */
-	HOOK_TRIG(id);
-
-	/* wait for call to finish */
-	while (VHOOK_DATA(0) > 0) ;
-
-	/* extract return value */
-
-	ret = VHOOK_DATA(1);
-
-	return ret;
-}
-
-int hook_call(unsigned id, unsigned pcnt, ...)
-{
-	va_list ap;
-	int i;
-	unsigned ret;
-
-	hook_init();
-
-	HOOK_DATA(0) = id;
-
-	va_start(ap, pcnt);
-	for (i = 1; i <= pcnt; i++)
-		HOOK_DATA(i) = va_arg(ap, unsigned);
-	va_end(ap);
-
-	ret = hook_trig(id);
-
-	return ret;
-}
-
-int hook_call_str(unsigned id, unsigned size, const char *str)
-{
-	int i;
-	unsigned ret;
-
-	hook_init();
-
-	HOOK_DATA(0) = id;
-	HOOK_DATA(1) = size;
-
-	for (i = 0; i < size; i++)
-		HOOK_DATA_BYTE(8 + i) = str[i];
-	HOOK_DATA_BYTE(8 + i) = 0;
-
-	ret = hook_trig(id);
-
-	return ret;
-}
-
-void print_str(const char *str)
-{
-	int i;
-	/* find null at end of string */
-	for (i = 1; str[i]; i++) ;
-	hook_call(hook_print_str, i, str);
-}
-
-void CPU_WATCHDOG_TIMEOUT(unsigned t)
-{
-}
diff --git a/arch/cris/arch-v32/mach-a3/vcs_hook.h b/arch/cris/arch-v32/mach-a3/vcs_hook.h
deleted file mode 100644
index 8b73d0e8392d..000000000000
--- a/arch/cris/arch-v32/mach-a3/vcs_hook.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Simulator hook call mechanism
- */
-
-#ifndef __hook_h__
-#define __hook_h__
-
-int hook_call(unsigned id, unsigned pcnt, ...);
-int hook_call_str(unsigned id, unsigned size, const char *str);
-
-enum hook_ids {
-  hook_debug_on = 1,
-  hook_debug_off,
-  hook_stop_sim_ok,
-  hook_stop_sim_fail,
-  hook_alloc_shared,
-  hook_ptr_shared,
-  hook_free_shared,
-  hook_file2shared,
-  hook_cmp_shared,
-  hook_print_params,
-  hook_sim_time,
-  hook_stop_sim,
-  hook_kick_dog,
-  hook_dog_timeout,
-  hook_rand,
-  hook_srand,
-  hook_rand_range,
-  hook_print_str,
-  hook_print_hex,
-  hook_cmp_offset_shared,
-  hook_fill_random_shared,
-  hook_alloc_random_data,
-  hook_calloc_random_data,
-  hook_print_int,
-  hook_print_uint,
-  hook_fputc,
-  hook_init_fd,
-  hook_sbrk,
-  hook_print_context_descr,
-  hook_print_data_descr,
-  hook_print_group_descr,
-  hook_fill_shared,
-  hook_sl_srand,
-  hook_sl_rand_irange,
-  hook_sl_rand_urange,
-  hook_sl_sh_malloc_aligned,
-  hook_sl_sh_calloc_aligned,
-  hook_sl_sh_alloc_random_data,
-  hook_sl_sh_file2mem,
-  hook_sl_vera_mbox_handle,
-  hook_sl_vera_mbox_put,
-  hook_sl_vera_mbox_get,
-  hook_sl_system,
-  hook_sl_sh_hexdump
-};
-
-#endif
diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile
index 41fa6a6893a9..d366e0891988 100644
--- a/arch/cris/arch-v32/mach-fs/Makefile
+++ b/arch/cris/arch-v32/mach-fs/Makefile
@@ -1,10 +1,8 @@
-# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o
 obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
diff --git a/arch/cris/arch-v32/mach-fs/vcs_hook.c b/arch/cris/arch-v32/mach-fs/vcs_hook.c
deleted file mode 100644
index b11594ae0cb6..000000000000
--- a/arch/cris/arch-v32/mach-fs/vcs_hook.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Call simulator hook. This is the part running in the
- * simulated program.
- */
-
-#include "vcs_hook.h"
-#include <stdarg.h>
-#include <arch-v32/hwregs/reg_map.h>
-#include <arch-v32/hwregs/intr_vect_defs.h>
-
-#define HOOK_TRIG_ADDR     0xb7000000	/* hook cvlog model reg address */
-#define HOOK_MEM_BASE_ADDR 0xa0000000	/* csp4 (shared mem) base addr */
-
-#define HOOK_DATA(offset) ((unsigned *)HOOK_MEM_BASE_ADDR)[offset]
-#define VHOOK_DATA(offset) ((volatile unsigned *)HOOK_MEM_BASE_ADDR)[offset]
-#define HOOK_TRIG(funcid) \
-	do { \
-		*((unsigned *) HOOK_TRIG_ADDR) = funcid; \
-	} while (0)
-#define HOOK_DATA_BYTE(offset) ((unsigned char *)HOOK_MEM_BASE_ADDR)[offset]
-
-int hook_call(unsigned id, unsigned pcnt, ...)
-{
-	va_list ap;
-	unsigned i;
-	unsigned ret;
-#ifdef USING_SOS
-	PREEMPT_OFF_SAVE();
-#endif
-
-	/* pass parameters */
-	HOOK_DATA(0) = id;
-
-	/* Have to make hook_print_str a special case since we call with a
-	 * parameter of byte type. Should perhaps be a separate
-	 * hook_call. */
-
-	if (id == hook_print_str) {
-		int i;
-		char *str;
-
-		HOOK_DATA(1) = pcnt;
-
-		va_start(ap, pcnt);
-		str = (char *)va_arg(ap, unsigned);
-
-		for (i = 0; i != pcnt; i++)
-			HOOK_DATA_BYTE(8 + i) = str[i];
-
-		HOOK_DATA_BYTE(8 + i) = 0;	/* null byte */
-	} else {
-		va_start(ap, pcnt);
-		for (i = 1; i <= pcnt; i++)
-			HOOK_DATA(i) = va_arg(ap, unsigned);
-		va_end(ap);
-	}
-
-	/* read from mem to make sure data has propagated to memory before
-	 * trigging */
-	ret = *((volatile unsigned *)HOOK_MEM_BASE_ADDR);
-
-	/* trigger hook */
-	HOOK_TRIG(id);
-
-	/* wait for call to finish */
-	while (VHOOK_DATA(0) > 0) ;
-
-	/* extract return value */
-
-	ret = VHOOK_DATA(1);
-
-#ifdef USING_SOS
-	PREEMPT_RESTORE();
-#endif
-	return ret;
-}
-
-unsigned hook_buf(unsigned i)
-{
-	return (HOOK_DATA(i));
-}
-
-void print_str(const char *str)
-{
-	int i;
-	/* find null at end of string */
-	for (i = 1; str[i]; i++) ;
-	hook_call(hook_print_str, i, str);
-}
-
-void CPU_KICK_DOG(void)
-{
-	(void)hook_call(hook_kick_dog, 0);
-}
-
-void CPU_WATCHDOG_TIMEOUT(unsigned t)
-{
-	(void)hook_call(hook_dog_timeout, 1, t);
-}
-
diff --git a/arch/cris/arch-v32/mach-fs/vcs_hook.h b/arch/cris/arch-v32/mach-fs/vcs_hook.h
deleted file mode 100644
index c000b9fece41..000000000000
--- a/arch/cris/arch-v32/mach-fs/vcs_hook.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Call simulator hook functions
- */
-
-#ifndef HOOK_H
-#define HOOK_H
-
-int hook_call(unsigned id, unsigned pcnt, ...);
-
-enum hook_ids {
-  hook_debug_on = 1,
-  hook_debug_off,
-  hook_stop_sim_ok,
-  hook_stop_sim_fail,
-  hook_alloc_shared,
-  hook_ptr_shared,
-  hook_free_shared,
-  hook_file2shared,
-  hook_cmp_shared,
-  hook_print_params,
-  hook_sim_time,
-  hook_stop_sim,
-  hook_kick_dog,
-  hook_dog_timeout,
-  hook_rand,
-  hook_srand,
-  hook_rand_range,
-  hook_print_str,
-  hook_print_hex,
-  hook_cmp_offset_shared,
-  hook_fill_random_shared,
-  hook_alloc_random_data,
-  hook_calloc_random_data,
-  hook_print_int,
-  hook_print_uint,
-  hook_fputc,
-  hook_init_fd,
-  hook_sbrk
-
-};
-
-#endif
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 0768bc409ca8..3deca5253d91 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -73,11 +73,7 @@ void __init cris_mmu_init(void)
 #endif
 		       REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
-#ifndef CONFIG_ETRAX_VCS_SIM
                        REG_STATE(mmu, rw_mm_cfg, seg_a, page)   |
-#else
-		       REG_STATE(mmu, rw_mm_cfg, seg_a, linear) |
-#endif
 		       REG_STATE(mmu, rw_mm_cfg, seg_9, page)   |
 		       REG_STATE(mmu, rw_mm_cfg, seg_8, page)   |
 		       REG_STATE(mmu, rw_mm_cfg, seg_7, page)   |
@@ -100,11 +96,7 @@ void __init cris_mmu_init(void)
 #endif
                          REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
-#ifndef CONFIG_ETRAX_VCS_SIM
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0x0) |
-#else
-                         REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa) |
-#endif
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_9, 0x0) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_8, 0x0));
 
diff --git a/arch/cris/include/arch-v10/arch/sv_addr_ag.h b/arch/cris/include/arch-v10/arch/sv_addr_ag.h
index e4a6b68b8982..5517f04153a4 100644
--- a/arch/cris/include/arch-v10/arch/sv_addr_ag.h
+++ b/arch/cris/include/arch-v10/arch/sv_addr_ag.h
@@ -114,7 +114,7 @@
 
 /*------------------------------------------------------------*/
 
-#include "sv_addr.agh"
+#include <arch/sv_addr.agh>
 
 #if __test_sv_addr__
 /* IO_MASK( R_BUS_CONFIG , CE ) */
diff --git a/arch/cris/include/arch-v10/arch/svinto.h b/arch/cris/include/arch-v10/arch/svinto.h
index 0881a1af7cee..da5c15272652 100644
--- a/arch/cris/include/arch-v10/arch/svinto.h
+++ b/arch/cris/include/arch-v10/arch/svinto.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_CRIS_SVINTO_H
 #define _ASM_CRIS_SVINTO_H
 
-#include "sv_addr_ag.h"
+#include <arch/sv_addr_ag.h>
 
 extern unsigned int genconfig_shadow; /* defined and set in head.S */
 
diff --git a/arch/cris/include/arch-v32/arch/dma.h b/arch/cris/include/arch-v32/arch/dma.h
index 61906153a9af..6f92f4f23f28 100644
--- a/arch/cris/include/arch-v32/arch/dma.h
+++ b/arch/cris/include/arch-v32/arch/dma.h
@@ -1 +1 @@
-#include "mach/dma.h"
+#include <mach/dma.h>
diff --git a/arch/cris/include/arch-v32/arch/hwregs/dma.h b/arch/cris/include/arch-v32/arch/hwregs/dma.h
index 3ce322b5c731..52bf67907f28 100644
--- a/arch/cris/include/arch-v32/arch/hwregs/dma.h
+++ b/arch/cris/include/arch-v32/arch/hwregs/dma.h
@@ -7,7 +7,7 @@
 #define dma_h
 
 /* registers */ /* Really needed, since both are listed in sw.list? */
-#include "dma_defs.h"
+#include <arch/hwregs/dma_defs.h>
 
 
 /* descriptors */
diff --git a/arch/cris/include/arch-v32/arch/page.h b/arch/cris/include/arch-v32/arch/page.h
index 20f1b4806bfe..e5b5aab52de8 100644
--- a/arch/cris/include/arch-v32/arch/page.h
+++ b/arch/cris/include/arch-v32/arch/page.h
@@ -11,13 +11,8 @@
  * selected bit it's possible to convert between KSEG_x and 0x40000000 where the
  * DRAM really resides. DRAM is virtually at 0xc.
  */
-#ifndef CONFIG_ETRAX_VCS_SIM
 #define __pa(x) ((unsigned long)(x) & 0x7fffffff)
 #define __va(x) ((void *)((unsigned long)(x) | 0x80000000))
-#else
-#define __pa(x) ((unsigned long)(x) & 0x3fffffff)
-#define __va(x) ((void *)((unsigned long)(x) | 0xc0000000))
-#endif
 
 #define VM_STACK_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
 				 VM_MAYREAD | VM_MAYWRITE)
diff --git a/arch/cris/include/arch-v32/arch/processor.h b/arch/cris/include/arch-v32/arch/processor.h
index 9603c907fbc4..a024b7d32fed 100644
--- a/arch/cris/include/arch-v32/arch/processor.h
+++ b/arch/cris/include/arch-v32/arch/processor.h
@@ -21,13 +21,9 @@ struct thread_struct {
 
 /*
  * User-space process size. This is hardcoded into a few places, so don't
- * changed it unless everything's clear!
+ * change it unless everything's clear!
  */
-#ifndef CONFIG_ETRAX_VCS_SIM
 #define TASK_SIZE	(0xB0000000UL)
-#else
-#define TASK_SIZE	(0xA0000000UL)
-#endif
 
 /* CCS I=1, enable interrupts. */
 #define INIT_THREAD { 0, 0, (1 << I_CCS_BITNR) }
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
index dd1abbdcbc7a..96c3b0fb62c1 100644
--- a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
+++ b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
@@ -71,12 +71,6 @@
 	move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
 	move.d   CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
 	move.d   $r1, [$r0]
-#ifdef CONFIG_ETRAX_VCS_SIM
-	;; Set up minimal flash waitstates
-	move.d 0, $r10
-	move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
-	move.d $r10, [$r11]
-#endif
 	.endm
 
 #endif
diff --git a/arch/cris/include/asm/elf.h b/arch/cris/include/asm/elf.h
index 8a3d8e2b33c1..8182f2dc89d0 100644
--- a/arch/cris/include/asm/elf.h
+++ b/arch/cris/include/asm/elf.h
@@ -86,6 +86,7 @@ typedef unsigned long elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif
diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h
index 9f1cd56da28c..146da904cdd8 100644
--- a/arch/cris/include/asm/pci.h
+++ b/arch/cris/include/asm/pci.h
@@ -19,7 +19,6 @@ extern unsigned long pci_mem_start;
 
 void pcibios_config_init(void);
 struct pci_bus * pcibios_scan_root(int bus);
-int pcibios_assign_resources(void);
 
 void pcibios_set_master(struct pci_dev *dev);
 void pcibios_penalize_isa_irq(int irq);
diff --git a/arch/cris/include/uapi/arch-v10/arch/Kbuild b/arch/cris/include/uapi/arch-v10/arch/Kbuild
new file mode 100644
index 000000000000..aafaa5aa54d4
--- /dev/null
+++ b/arch/cris/include/uapi/arch-v10/arch/Kbuild
@@ -0,0 +1 @@
+# UAPI Header export list
diff --git a/arch/cris/include/uapi/arch-v32/arch/Kbuild b/arch/cris/include/uapi/arch-v32/arch/Kbuild
new file mode 100644
index 000000000000..aafaa5aa54d4
--- /dev/null
+++ b/arch/cris/include/uapi/arch-v32/arch/Kbuild
@@ -0,0 +1 @@
+# UAPI Header export list
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..f50236ae9ca3
--- /dev/null
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -0,0 +1,5 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+header-y += arch-v10/
+header-y += arch-v32/
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 66fd01728790..7f65be6f7f17 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -25,6 +25,7 @@
 #include <linux/elfcore.h>
 #include <linux/mqueue.h>
 #include <linux/reboot.h>
+#include <linux/rcupdate.h>
 
 //#define DEBUG
 
@@ -74,6 +75,7 @@ void cpu_idle (void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched()) {
 			void (*idle)(void);
 			/*
@@ -86,6 +88,7 @@ void cpu_idle (void)
 				idle = default_idle;
 			idle();
 		}
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 	}
 }
diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h
index c3819804a74b..9ccbc80f0b11 100644
--- a/arch/frv/include/asm/elf.h
+++ b/arch/frv/include/asm/elf.h
@@ -137,6 +137,7 @@ do {											\
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif
diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/frv/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 5fa3889d858b..0b579927439d 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -153,23 +153,22 @@ static int user_atoi(char __user *ubuf, size_t len)
 static int sysctl_pm_do_suspend(ctl_table *ctl, int write,
 				void __user *buffer, size_t *lenp, loff_t *fpos)
 {
-	int retval, mode;
+	int mode;
 
 	if (*lenp <= 0)
 		return -EIO;
 
 	mode = user_atoi(buffer, *lenp);
-	if ((mode != 1) && (mode != 5))
-		return -EINVAL;
+	switch (mode) {
+	case 1:
+	    return pm_do_suspend();
 
-	if (retval == 0) {
-		if (mode == 5)
-		    retval = pm_do_bus_sleep();
-		else
-		    retval = pm_do_suspend();
-	}
+	case 5:
+	    return pm_do_bus_sleep();
 
-	return retval;
+	default:
+	    return -EINVAL;
+	}
 }
 
 static int try_set_cmode(int new_cmode)
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index ff95f50efea5..2eb7fa5bf9d8 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -25,6 +25,7 @@
 #include <linux/reboot.h>
 #include <linux/interrupt.h>
 #include <linux/pagemap.h>
+#include <linux/rcupdate.h>
 
 #include <asm/asm-offsets.h>
 #include <asm/uaccess.h>
@@ -69,12 +70,14 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched()) {
 			check_pgt_cache();
 
 			if (!frv_dma_inprogress && idle)
 				idle();
 		}
+		rcu_idle_exit();
 
 		schedule_preempt_disabled();
 	}
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index 75cf7f4b2fa8..1f1e5efb3385 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -184,7 +184,7 @@ static struct clock_cmode __pminitdata clock_cmodes_fr555[16] = {
 	[6]	= {	_x1,	_x1_5,	_x1_5,	_x4_5,	_x0_375	},
 };
 
-static const struct clock_cmode __pminitdata *clock_cmodes;
+static const struct clock_cmode __pminitconst *clock_cmodes;
 static int __pminitdata clock_doubled;
 
 static struct uart_port __pminitdata __frv_uart0 = {
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index 20f6497b2cd5..c677b9d81d30 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -28,7 +28,7 @@
  *
  */
 
-static const uint8_t __initdata pci_bus0_irq_routing[32][4] = {
+static const uint8_t __initconst pci_bus0_irq_routing[32][4] = {
 	[0 ] = { IRQ_FPGA_MB86943_PCI_INTA },
 	[16] = { IRQ_FPGA_RTL8029_INTA },
 	[17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB },
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index d04ed14bbf0c..71e9bcf58105 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -330,10 +330,8 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 	pci_read_bridge_bases(bus);
 
 	if (bus->number == 0) {
-		struct list_head *ln;
 		struct pci_dev *dev;
-		for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
-			dev = pci_dev_b(ln);
+		list_for_each_entry(dev, &bus->devices, bus_list) {
 			if (dev->devfn == 0) {
 				dev->resource[0].start = 0;
 				dev->resource[0].end = 0;
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
index c24fa250d653..41193c396bff 100644
--- a/arch/h8300/include/asm/elf.h
+++ b/arch/h8300/include/asm/elf.h
@@ -54,7 +54,8 @@ typedef unsigned long elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #define R_H8_NONE       0
 #define R_H8_DIR32      1
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 0e9c315be104..f153ed1a4c08 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -36,6 +36,7 @@
 #include <linux/reboot.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 
 #include <asm/uaccess.h>
 #include <asm/traps.h>
@@ -78,8 +79,10 @@ void (*idle)(void) = default_idle;
 void cpu_idle(void)
 {
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched())
 			idle();
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 	}
 }
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index aaf5e5a48f93..4bdc7311784e 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -51,6 +51,7 @@ asmlinkage void syscall_print(void *dummy,...)
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
  */
+asmlinkage
 int kernel_execve(const char *filename,
 		  const char *const argv[],
 		  const char *const envp[])
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
index a2ae5e952137..0a8b5cd5bf38 100644
--- a/arch/h8300/kernel/timer/itu.c
+++ b/arch/h8300/kernel/timer/itu.c
@@ -62,7 +62,7 @@ static struct irqaction itu_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {1, 2, 4, 8};
+static const int __initconst divide_rate[] = {1, 2, 4, 8};
 
 void __init h8300_timer_setup(void)
 {
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
index ae0d38161139..462d9f581719 100644
--- a/arch/h8300/kernel/timer/timer16.c
+++ b/arch/h8300/kernel/timer/timer16.c
@@ -57,7 +57,7 @@ static struct irqaction timer16_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {1, 2, 4, 8};
+static const int __initconst divide_rate[] = {1, 2, 4, 8};
 
 void __init h8300_timer_setup(void)
 {
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
index 7a1533fad47d..505f3415b40f 100644
--- a/arch/h8300/kernel/timer/timer8.c
+++ b/arch/h8300/kernel/timer/timer8.c
@@ -77,7 +77,7 @@ static struct irqaction timer8_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {8, 64, 8192};
+static const int __initconst divide_rate[] = {8, 64, 8192};
 
 void __init h8300_timer_setup(void)
 {
diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
index 2193a2e2859a..0350f6204ecf 100644
--- a/arch/h8300/kernel/timer/tpu.c
+++ b/arch/h8300/kernel/timer/tpu.c
@@ -66,7 +66,7 @@ static struct irqaction tpu_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {
+static const int __initconst divide_rate[] = {
 #if CONFIG_H8300_TPU_CH == 0
 	1,4,16,64,0,0,0,0,
 #elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
diff --git a/arch/h8300/platform/h8300h/irq.c b/arch/h8300/platform/h8300h/irq.c
index bc4f51bceef5..0a50353e09d5 100644
--- a/arch/h8300/platform/h8300h/irq.c
+++ b/arch/h8300/platform/h8300h/irq.c
@@ -14,14 +14,14 @@
 #include <asm/gpio-internal.h>
 #include <asm/regs306x.h>
 
-const int __initdata h8300_saved_vectors[] = {
+const int __initconst h8300_saved_vectors[] = {
 #if defined(CONFIG_GDB_DEBUG)
 	TRAP3_VEC,	/* TRAPA #3 is GDB breakpoint */
 #endif
 	-1,
 };
 
-const h8300_vector __initdata h8300_trap_table[] = {
+const h8300_vector __initconst h8300_trap_table[] = {
 	0, 0, 0, 0, 0, 0, 0, 0,
 	system_call,
 	0,
diff --git a/arch/h8300/platform/h8s/irq.c b/arch/h8300/platform/h8s/irq.c
index 7b5f29febc07..f3a5511c16b1 100644
--- a/arch/h8300/platform/h8s/irq.c
+++ b/arch/h8300/platform/h8s/irq.c
@@ -18,7 +18,7 @@
 #include <asm/regs267x.h>
 
 /* saved vector list */
-const int __initdata h8300_saved_vectors[]={
+const int __initconst h8300_saved_vectors[] = {
 #if defined(CONFIG_GDB_DEBUG)
 	TRACE_VEC,
 	TRAP3_VEC,
@@ -27,7 +27,7 @@ const int __initdata h8300_saved_vectors[]={
 };
 
 /* trap entry table */
-const H8300_VECTOR __initdata h8300_trap_table[] = {
+const H8300_VECTOR __initconst h8300_trap_table[] = {
 	0,0,0,0,0,
 	trace_break,  /* TRACE */
 	0,0,
diff --git a/arch/hexagon/include/asm/elf.h b/arch/hexagon/include/asm/elf.h
index 37976a0d3650..82b499621e05 100644
--- a/arch/hexagon/include/asm/elf.h
+++ b/arch/hexagon/include/asm/elf.h
@@ -217,7 +217,8 @@ do {					\
 #define ELF_PLATFORM  (NULL)
 
 #ifdef __KERNEL__
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #endif
 
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
diff --git a/arch/hexagon/include/asm/unistd.h b/arch/hexagon/include/asm/unistd.h
index 4d0ecde3665f..c0d5565030ae 100644
--- a/arch/hexagon/include/asm/unistd.h
+++ b/arch/hexagon/include/asm/unistd.h
@@ -18,9 +18,6 @@
  * 02110-1301, USA.
  */
 
-#if !defined(_ASM_HEXAGON_UNISTD_H) || defined(__SYSCALL)
-#define _ASM_HEXAGON_UNISTD_H
-
 /*
  *  The kernel pulls this unistd.h in three different ways:
  *  1.  the "normal" way which gets all the __NR defines
@@ -32,5 +29,3 @@
 #define sys_mmap2 sys_mmap_pgoff
 
 #include <asm-generic/unistd.h>
-
-#endif
diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/hexagon/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 310cf5781fad..3c720ef6c32d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -25,6 +25,7 @@ config IA64
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
+	select HAVE_VIRT_CPU_ACCOUNTING
 	select ARCH_DISCARD_MEMBLOCK
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
@@ -340,17 +341,6 @@ config FORCE_MAX_ZONEORDER
 	default "17" if HUGETLB_PAGE
 	default "11"
 
-config VIRT_CPU_ACCOUNTING
-	bool "Deterministic task and CPU time accounting"
-	default n
-	help
-	  Select this option to enable more accurate task and CPU time
-	  accounting.  This is done by reading a CPU counter on each
-	  kernel entry and exit and on transitions within the kernel
-	  between system, softirq and hardirq state, so there is a
-	  small performance impact.
-	  If in doubt, say N here.
-
 config SMP
 	bool "Symmetric multi-processing support"
 	select USE_GENERIC_SMP_HELPERS
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 954d81e2e837..7913695b2fcb 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_MISC_DEVICES=y
 CONFIG_INTEL_IOMMU=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index 91c41ecfa6d9..f8e913365423 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_CRYPTO_MD5=y
-CONFIG_MISC_DEVICES=y
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index c34785dca92b..ec536e4e36c9 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -338,7 +338,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
+	    !(tty->termios.c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
 	}
 }
@@ -545,6 +545,7 @@ static int __init simrs_init(void)
 	/* the port is imaginary */
 	printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
 
+	tty_port_link_device(&state->port, hp_simserial_driver, 0);
 	retval = tty_register_driver(hp_simserial_driver);
 	if (retval) {
 		printk(KERN_ERR "Couldn't register simserial driver\n");
diff --git a/arch/ia64/include/asm/numa.h b/arch/ia64/include/asm/numa.h
index 6a8a27cfae3e..2e27ef175652 100644
--- a/arch/ia64/include/asm/numa.h
+++ b/arch/ia64/include/asm/numa.h
@@ -59,7 +59,7 @@ extern struct node_cpuid_s node_cpuid[NR_CPUS];
  */
 
 extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
-#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
+#define node_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
 
 extern int paddr_to_nid(unsigned long paddr);
 
diff --git a/arch/ia64/include/asm/switch_to.h b/arch/ia64/include/asm/switch_to.h
index cb2412fcd17f..d38c7ea5eea5 100644
--- a/arch/ia64/include/asm/switch_to.h
+++ b/arch/ia64/include/asm/switch_to.h
@@ -30,13 +30,6 @@ extern struct task_struct *ia64_switch_to (void *next_task);
 extern void ia64_save_extra (struct task_struct *task);
 extern void ia64_load_extra (struct task_struct *task);
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
-# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
-#else
-# define IA64_ACCOUNT_ON_SWITCH(p,n)
-#endif
-
 #ifdef CONFIG_PERFMON
   DECLARE_PER_CPU(unsigned long, pfm_syst_info);
 # define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
@@ -49,7 +42,6 @@ extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct
 	 || PERFMON_IS_SYSWIDE())
 
 #define __switch_to(prev,next,last) do {							 \
-	IA64_ACCOUNT_ON_SWITCH(prev, next);							 \
 	if (IA64_HAS_EXTRA_STATE(prev))								 \
 		ia64_save_extra(prev);								 \
 	if (IA64_HAS_EXTRA_STATE(next))								 \
diff --git a/arch/ia64/include/asm/xen/interface.h b/arch/ia64/include/asm/xen/interface.h
index 09d5f7fd9db1..e88c5de27410 100644
--- a/arch/ia64/include/asm/xen/interface.h
+++ b/arch/ia64/include/asm/xen/interface.h
@@ -67,6 +67,11 @@
 #define set_xen_guest_handle(hnd, val)	do { (hnd).p = val; } while (0)
 
 #ifndef __ASSEMBLY__
+/* Explicitly size integers that represent pfns in the public interface
+ * with Xen so that we could have one ABI that works for 32 and 64 bit
+ * guests. */
+typedef unsigned long xen_pfn_t;
+typedef unsigned long xen_ulong_t;
 /* Guest handles for primitive C types. */
 __DEFINE_GUEST_HANDLE(uchar, unsigned char);
 __DEFINE_GUEST_HANDLE(uint, unsigned int);
@@ -79,7 +84,6 @@ DEFINE_GUEST_HANDLE(void);
 DEFINE_GUEST_HANDLE(uint64_t);
 DEFINE_GUEST_HANDLE(uint32_t);
 
-typedef unsigned long xen_pfn_t;
 DEFINE_GUEST_HANDLE(xen_pfn_t);
 #define PRI_xen_pfn	"lx"
 #endif
@@ -265,6 +269,8 @@ typedef struct xen_callback xen_callback_t;
 
 #endif /* !__ASSEMBLY__ */
 
+#include <asm/pvclock-abi.h>
+
 /* Size of the shared_info area (this is not related to page size).  */
 #define XSI_SHIFT			14
 #define XSI_SIZE			(1 << XSI_SHIFT)
diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 6f38b6120d96..440578850ae5 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -497,7 +497,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	srat_num_cpus++;
 }
 
-void __init
+int __init
 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 {
 	unsigned long paddr, size;
@@ -512,7 +512,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 
 	/* Ignore disabled entries */
 	if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
-		return;
+		return -1;
 
 	/* record this node in proximity bitmap */
 	pxm_bit_set(pxm);
@@ -531,6 +531,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 	p->size = size;
 	p->nid = pxm;
 	num_node_memblks++;
+	return 0;
 }
 
 void __init acpi_numa_arch_fixup(void)
diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c
index 070e8effa175..5151a649c96b 100644
--- a/arch/ia64/kernel/machine_kexec.c
+++ b/arch/ia64/kernel/machine_kexec.c
@@ -85,12 +85,13 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg)
 	struct kimage *image = arg;
 	relocate_new_kernel_t rnk;
 	void *pal_addr = efi_get_pal_addr();
-	unsigned long code_addr = (unsigned long)page_address(image->control_code_page);
+	unsigned long code_addr;
 	int ii;
 	u64 fp, gp;
 	ia64_fptr_t *init_handler = (ia64_fptr_t *)ia64_os_init_on_kdump;
 
 	BUG_ON(!image);
+	code_addr = (unsigned long)page_address(image->control_code_page);
 	if (image->type == KEXEC_TYPE_CRASH) {
 		crash_save_this_cpu();
 		current->thread.ksp = (__u64)info->sw - 16;
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 1c2e89406721..9392e021c93b 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -158,7 +158,8 @@ mca_handler_bh(unsigned long paddr, void *iip, unsigned long ipsr)
 	ia64_mlogbuf_dump();
 	printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, "
 		"iip: %p, psr: 0x%lx,paddr: 0x%lx](%s) encounters MCA.\n",
-	       raw_smp_processor_id(), current->pid, current_uid(),
+	       raw_smp_processor_id(), current->pid,
+		from_kuid(&init_user_ns, current_uid()),
 		iip, ipsr, paddr, current->comm);
 
 	spin_lock(&mca_bh_lock);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 3fa4bc536953..f388b4e18a37 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2306,7 +2306,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
 	 * partially initialize the vma for the sampling buffer
 	 */
 	vma->vm_mm	     = mm;
-	vma->vm_file	     = filp;
+	vma->vm_file	     = get_file(filp);
 	vma->vm_flags	     = VM_READ| VM_MAYREAD |VM_RESERVED;
 	vma->vm_page_prot    = PAGE_READONLY; /* XXX may need to change */
 
@@ -2345,8 +2345,6 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
 		goto error;
 	}
 
-	get_file(filp);
-
 	/*
 	 * now insert the vma in the vm list for the process, must be
 	 * done with mmap lock held
@@ -2380,8 +2378,8 @@ static int
 pfm_bad_permissions(struct task_struct *task)
 {
 	const struct cred *tcred;
-	uid_t uid = current_uid();
-	gid_t gid = current_gid();
+	kuid_t uid = current_uid();
+	kgid_t gid = current_gid();
 	int ret;
 
 	rcu_read_lock();
@@ -2389,20 +2387,20 @@ pfm_bad_permissions(struct task_struct *task)
 
 	/* inspired by ptrace_attach() */
 	DPRINT(("cur: uid=%d gid=%d task: euid=%d suid=%d uid=%d egid=%d sgid=%d\n",
-		uid,
-		gid,
-		tcred->euid,
-		tcred->suid,
-		tcred->uid,
-		tcred->egid,
-		tcred->sgid));
-
-	ret = ((uid != tcred->euid)
-	       || (uid != tcred->suid)
-	       || (uid != tcred->uid)
-	       || (gid != tcred->egid)
-	       || (gid != tcred->sgid)
-	       || (gid != tcred->gid)) && !capable(CAP_SYS_PTRACE);
+		from_kuid(&init_user_ns, uid),
+		from_kgid(&init_user_ns, gid),
+		from_kuid(&init_user_ns, tcred->euid),
+		from_kuid(&init_user_ns, tcred->suid),
+		from_kuid(&init_user_ns, tcred->uid),
+		from_kgid(&init_user_ns, tcred->egid),
+		from_kgid(&init_user_ns, tcred->sgid)));
+
+	ret = ((!uid_eq(uid, tcred->euid))
+	       || (!uid_eq(uid, tcred->suid))
+	       || (!uid_eq(uid, tcred->uid))
+	       || (!gid_eq(gid, tcred->egid))
+	       || (!gid_eq(gid, tcred->sgid))
+	       || (!gid_eq(gid, tcred->gid))) && !capable(CAP_SYS_PTRACE);
 
 	rcu_read_unlock();
 	return ret;
@@ -4782,7 +4780,7 @@ recheck:
 asmlinkage long
 sys_perfmonctl (int fd, int cmd, void __user *arg, int count)
 {
-	struct file *file = NULL;
+	struct fd f = {NULL, 0};
 	pfm_context_t *ctx = NULL;
 	unsigned long flags = 0UL;
 	void *args_k = NULL;
@@ -4879,17 +4877,17 @@ restart_args:
 
 	ret = -EBADF;
 
-	file = fget(fd);
-	if (unlikely(file == NULL)) {
+	f = fdget(fd);
+	if (unlikely(f.file == NULL)) {
 		DPRINT(("invalid fd %d\n", fd));
 		goto error_args;
 	}
-	if (unlikely(PFM_IS_FILE(file) == 0)) {
+	if (unlikely(PFM_IS_FILE(f.file) == 0)) {
 		DPRINT(("fd %d not related to perfmon\n", fd));
 		goto error_args;
 	}
 
-	ctx = file->private_data;
+	ctx = f.file->private_data;
 	if (unlikely(ctx == NULL)) {
 		DPRINT(("no context for fd %d\n", fd));
 		goto error_args;
@@ -4919,8 +4917,8 @@ abort_locked:
 	if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
 
 error_args:
-	if (file)
-		fput(file);
+	if (f.file)
+		fdput(f);
 
 	kfree(args_k);
 
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index dd6fc1449741..ee31fe9b310e 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -29,6 +29,7 @@
 #include <linux/kdebug.h>
 #include <linux/utsname.h>
 #include <linux/tracehook.h>
+#include <linux/rcupdate.h>
 
 #include <asm/cpu.h>
 #include <asm/delay.h>
@@ -196,8 +197,8 @@ do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 		ia64_do_signal(scr, in_syscall);
 	}
 
-	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
+	if (test_and_clear_thread_flag(TIF_NOTIFY_RESUME)) {
+		local_irq_enable();	/* force interrupt enable */
 		tracehook_notify_resume(&scr->pt);
 	}
 
@@ -279,6 +280,7 @@ cpu_idle (void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		if (can_do_pal_halt) {
 			current_thread_info()->status &= ~TS_POLLING;
 			/*
@@ -309,6 +311,7 @@ cpu_idle (void)
 			normal_xtp();
 #endif
 		}
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 		check_pgt_cache();
 		if (cpu_is_offline(cpu))
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index a199be1fe619..37dd79511cbe 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -220,7 +220,7 @@ ia64_rt_sigreturn (struct sigscratch *scr)
 	si.si_errno = 0;
 	si.si_code = SI_KERNEL;
 	si.si_pid = task_pid_vnr(current);
-	si.si_uid = current_uid();
+	si.si_uid = from_kuid_munged(current_user_ns(), current_uid());
 	si.si_addr = sc;
 	force_sig_info(SIGSEGV, &si, current);
 	return retval;
@@ -317,7 +317,7 @@ force_sigsegv_info (int sig, void __user *addr)
 	si.si_errno = 0;
 	si.si_code = SI_KERNEL;
 	si.si_pid = task_pid_vnr(current);
-	si.si_uid = current_uid();
+	si.si_uid = from_kuid_munged(current_user_ns(), current_uid());
 	si.si_addr = addr;
 	force_sig_info(SIGSEGV, &si, current);
 	return 0;
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index ecc904b33c5f..80ff9acc5edf 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -83,32 +83,36 @@ static struct clocksource *itc_clocksource;
 
 extern cputime_t cycle_to_cputime(u64 cyc);
 
+static void vtime_account_user(struct task_struct *tsk)
+{
+	cputime_t delta_utime;
+	struct thread_info *ti = task_thread_info(tsk);
+
+	if (ti->ac_utime) {
+		delta_utime = cycle_to_cputime(ti->ac_utime);
+		account_user_time(tsk, delta_utime, delta_utime);
+		ti->ac_utime = 0;
+	}
+}
+
 /*
  * Called from the context switch with interrupts disabled, to charge all
  * accumulated times to the current process, and to prepare accounting on
  * the next process.
  */
-void ia64_account_on_switch(struct task_struct *prev, struct task_struct *next)
+void vtime_task_switch(struct task_struct *prev)
 {
 	struct thread_info *pi = task_thread_info(prev);
-	struct thread_info *ni = task_thread_info(next);
-	cputime_t delta_stime, delta_utime;
-	__u64 now;
+	struct thread_info *ni = task_thread_info(current);
 
-	now = ia64_get_itc();
-
-	delta_stime = cycle_to_cputime(pi->ac_stime + (now - pi->ac_stamp));
 	if (idle_task(smp_processor_id()) != prev)
-		account_system_time(prev, 0, delta_stime, delta_stime);
+		vtime_account_system(prev);
 	else
-		account_idle_time(delta_stime);
+		vtime_account_idle(prev);
 
-	if (pi->ac_utime) {
-		delta_utime = cycle_to_cputime(pi->ac_utime);
-		account_user_time(prev, delta_utime, delta_utime);
-	}
+	vtime_account_user(prev);
 
-	pi->ac_stamp = ni->ac_stamp = now;
+	pi->ac_stamp = ni->ac_stamp;
 	ni->ac_stime = ni->ac_utime = 0;
 }
 
@@ -116,29 +120,32 @@ void ia64_account_on_switch(struct task_struct *prev, struct task_struct *next)
  * Account time for a transition between system, hard irq or soft irq state.
  * Note that this function is called with interrupts enabled.
  */
-void account_system_vtime(struct task_struct *tsk)
+static cputime_t vtime_delta(struct task_struct *tsk)
 {
 	struct thread_info *ti = task_thread_info(tsk);
-	unsigned long flags;
 	cputime_t delta_stime;
 	__u64 now;
 
-	local_irq_save(flags);
-
 	now = ia64_get_itc();
 
 	delta_stime = cycle_to_cputime(ti->ac_stime + (now - ti->ac_stamp));
-	if (irq_count() || idle_task(smp_processor_id()) != tsk)
-		account_system_time(tsk, 0, delta_stime, delta_stime);
-	else
-		account_idle_time(delta_stime);
 	ti->ac_stime = 0;
-
 	ti->ac_stamp = now;
 
-	local_irq_restore(flags);
+	return delta_stime;
+}
+
+void vtime_account_system(struct task_struct *tsk)
+{
+	cputime_t delta = vtime_delta(tsk);
+
+	account_system_time(tsk, 0, delta, delta);
+}
+
+void vtime_account_idle(struct task_struct *tsk)
+{
+	account_idle_time(vtime_delta(tsk));
 }
-EXPORT_SYMBOL_GPL(account_system_vtime);
 
 /*
  * Called from the timer interrupt handler to charge accumulated user time
@@ -146,14 +153,7 @@ EXPORT_SYMBOL_GPL(account_system_vtime);
  */
 void account_process_tick(struct task_struct *p, int user_tick)
 {
-	struct thread_info *ti = task_thread_info(p);
-	cputime_t delta_utime;
-
-	if (ti->ac_utime) {
-		delta_utime = cycle_to_cputime(ti->ac_utime);
-		account_user_time(p, delta_utime, delta_utime);
-		ti->ac_utime = 0;
-	}
+	vtime_account_user(p);
 }
 
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING */
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index bd77cb507c1c..8b3a9c0e771d 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -924,6 +924,16 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
+int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_event)
+{
+	if (!irqchip_in_kernel(kvm))
+		return -ENXIO;
+
+	irq_event->status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
+					irq_event->irq, irq_event->level);
+	return 0;
+}
+
 long kvm_arch_vm_ioctl(struct file *filp,
 		unsigned int ioctl, unsigned long arg)
 {
@@ -963,29 +973,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		}
 		break;
-	case KVM_IRQ_LINE_STATUS:
-	case KVM_IRQ_LINE: {
-		struct kvm_irq_level irq_event;
-
-		r = -EFAULT;
-		if (copy_from_user(&irq_event, argp, sizeof irq_event))
-			goto out;
-		r = -ENXIO;
-		if (irqchip_in_kernel(kvm)) {
-			__s32 status;
-			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
-				    irq_event.irq, irq_event.level);
-			if (ioctl == KVM_IRQ_LINE_STATUS) {
-				r = -EFAULT;
-				irq_event.status = status;
-				if (copy_to_user(argp, &irq_event,
-							sizeof irq_event))
-					goto out;
-			}
-			r = 0;
-		}
-		break;
-		}
 	case KVM_GET_IRQCHIP: {
 		/* 0: PIC master, 1: PIC slave, 2: IOAPIC */
 		struct kvm_irqchip chip;
@@ -1626,11 +1613,17 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 	return;
 }
 
-void kvm_arch_flush_shadow(struct kvm *kvm)
+void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
 	kvm_flush_remote_tlbs(kvm);
 }
 
+void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
+				   struct kvm_memory_slot *slot)
+{
+	kvm_arch_flush_shadow_all();
+}
+
 long kvm_arch_dev_ioctl(struct file *filp,
 			unsigned int ioctl, unsigned long arg)
 {
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 81acc7a57f3e..5faa66c5c2a8 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -295,7 +295,6 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	window->resource.flags = flags;
 	window->resource.start = addr.minimum + offset;
 	window->resource.end = window->resource.start + addr.address_length - 1;
-	window->resource.child = NULL;
 	window->offset = offset;
 
 	if (insert_resource(root, &window->resource)) {
@@ -357,7 +356,7 @@ pci_acpi_scan_root(struct acpi_pci_root *root)
 			&windows);
 	if (windows) {
 		controller->window =
-			kmalloc_node(sizeof(*controller->window) * windows,
+			kzalloc_node(sizeof(*controller->window) * windows,
 				     GFP_KERNEL, controller->node);
 		if (!controller->window)
 			goto out2;
@@ -461,14 +460,6 @@ void pcibios_set_master (struct pci_dev *dev)
 	/* No special bus mastering setup handling */
 }
 
-void __devinit
-pcibios_update_irq (struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-
-	/* ??? FIXME -- record old value for shutdown.  */
-}
-
 int
 pcibios_enable_device (struct pci_dev *dev, int mask)
 {
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index fbb5f2f87eed..8630875e74b5 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -229,7 +229,6 @@ void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info,
 {
 	int segment = pci_domain_nr(dev->bus);
 	struct pcibus_bussoft *bs;
-	struct pci_bus *host_pci_bus;
 	struct pci_dev *host_pci_dev;
 	unsigned int bus_no, devfn;
 
@@ -245,8 +244,7 @@ void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info,
 
 	bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff;
 	devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff;
- 	host_pci_bus = pci_find_bus(segment, bus_no);
- 	host_pci_dev = pci_get_slot(host_pci_bus, devfn);
+	host_pci_dev = pci_get_domain_bus_and_slot(segment, bus_no, devfn);
 
 	pcidev_info->host_pci_dev = host_pci_dev;
 	pcidev_info->pdi_linux_pcidev = dev;
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
index 3bb12230721f..01f479ee1c43 100644
--- a/arch/ia64/xen/irq_xen.c
+++ b/arch/ia64/xen/irq_xen.c
@@ -433,7 +433,7 @@ xen_resend_irq(unsigned int vector)
 	(void)resend_irq_on_evtchn(vector);
 }
 
-const struct pv_irq_ops xen_irq_ops __initdata = {
+const struct pv_irq_ops xen_irq_ops __initconst = {
 	.register_ipi = xen_register_ipi,
 
 	.assign_irq_vector = xen_assign_irq_vector,
diff --git a/arch/ia64/xen/irq_xen.h b/arch/ia64/xen/irq_xen.h
index 26110f330c87..1778517b90fe 100644
--- a/arch/ia64/xen/irq_xen.h
+++ b/arch/ia64/xen/irq_xen.h
@@ -27,7 +27,7 @@ extern void (*late_time_init)(void);
 extern char xen_event_callback;
 void __init xen_init_IRQ(void);
 
-extern const struct pv_irq_ops xen_irq_ops __initdata;
+extern const struct pv_irq_ops xen_irq_ops __initconst;
 extern void xen_smp_intr_init(void);
 extern void xen_send_ipi(int cpu, int vec);
 
diff --git a/arch/ia64/xen/xencomm.c b/arch/ia64/xen/xencomm.c
index 1f5d7ac82e97..73d903ca2d64 100644
--- a/arch/ia64/xen/xencomm.c
+++ b/arch/ia64/xen/xencomm.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/err.h>
 
 static unsigned long kernel_virtual_offset;
 static int is_xencomm_initialized;
@@ -98,7 +99,7 @@ xencomm_vtop(unsigned long vaddr)
 
 	/* We assume the page is modified.  */
 	page = follow_page(vma, vaddr, FOLL_WRITE | FOLL_TOUCH);
-	if (!page)
+	if (IS_ERR_OR_NULL(page))
 		return ~0UL;
 
 	return (page_to_pfn(page) << PAGE_SHIFT) | (vaddr & ~PAGE_MASK);
diff --git a/arch/m32r/include/asm/elf.h b/arch/m32r/include/asm/elf.h
index b8da7d0574d2..70896161c636 100644
--- a/arch/m32r/include/asm/elf.h
+++ b/arch/m32r/include/asm/elf.h
@@ -128,6 +128,7 @@ typedef elf_fpreg_t elf_fpregset_t;
    intent than poking at uname or /proc/cpuinfo.  */
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif  /* _ASM_M32R__ELF_H */
diff --git a/arch/m32r/include/uapi/asm/Kbuild b/arch/m32r/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/m32r/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index 3a4a32b27208..384e63f3a4c4 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -26,6 +26,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/hardirq.h>
+#include <linux/rcupdate.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -82,6 +83,7 @@ void cpu_idle (void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched()) {
 			void (*idle)(void) = pm_idle;
 
@@ -90,6 +92,7 @@ void cpu_idle (void)
 
 			idle();
 		}
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 	}
 }
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 0b0f8b8c4a26..b22df9410dce 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -5,6 +5,7 @@ config M68K
 	select HAVE_AOUT if MMU
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
+	select GENERIC_ATOMIC64
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
 	select GENERIC_STRNCPY_FROM_USER if MMU
@@ -54,18 +55,6 @@ config ZONE_DMA
 	bool
 	default y
 
-config CPU_HAS_NO_BITFIELDS
-	bool
-
-config CPU_HAS_NO_MULDIV64
-	bool
-
-config CPU_HAS_ADDRESS_SPACES
-	bool
-
-config FPU
-	bool
-
 config HZ
 	int
 	default 1000 if CLEOPATRA
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 43a9f8f1b8eb..c4eb79edecec 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -28,6 +28,7 @@ config COLDFIRE
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_MULDIV64
 	select GENERIC_CSUM
+	select HAVE_CLK
 
 endchoice
 
@@ -37,6 +38,7 @@ config M68000
 	bool
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_MULDIV64
+	select CPU_HAS_NO_UNALIGNED
 	select GENERIC_CSUM
 	help
 	  The Freescale (was Motorola) 68000 CPU is the first generation of
@@ -48,6 +50,7 @@ config M68000
 config MCPU32
 	bool
 	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_UNALIGNED
 	help
 	  The Freescale (was then Motorola) CPU32 is a CPU core that is
 	  based on the 68020 processor. For the most part it is used in
@@ -56,7 +59,6 @@ config MCPU32
 config M68020
 	bool "68020 support"
 	depends on MMU
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68020
@@ -67,7 +69,6 @@ config M68020
 config M68030
 	bool "68030 support"
 	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68030
@@ -77,7 +78,6 @@ config M68030
 config M68040
 	bool "68040 support"
 	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68LC040
@@ -88,7 +88,6 @@ config M68040
 config M68060
 	bool "68060 support"
 	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68060
@@ -376,6 +375,18 @@ config NODES_SHIFT
 	default "3"
 	depends on !SINGLE_MEMORY_CHUNK
 
+config CPU_HAS_NO_BITFIELDS
+	bool
+
+config CPU_HAS_NO_MULDIV64
+	bool
+
+config CPU_HAS_NO_UNALIGNED
+	bool
+
+config CPU_HAS_ADDRESS_SPACES
+	bool
+
 config FPU
 	bool
 
diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
index 80076d368b7e..6083088c0cca 100644
--- a/arch/m68k/amiga/platform.c
+++ b/arch/m68k/amiga/platform.c
@@ -56,10 +56,7 @@ static int __init amiga_init_bus(void)
 	n = AMIGAHW_PRESENT(ZORRO3) ? 4 : 2;
 	pdev = platform_device_register_simple("amiga-zorro", -1,
 					       zorro_resources, n);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
+	return PTR_RET(pdev);
 }
 
 subsys_initcall(amiga_init_bus);
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 0a30406b9442..f5565d6eeb8e 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
 
 	timer_handler(irq, dev_id);
 
-	x=*(volatile unsigned char *)(timer+3);
-	x=*(volatile unsigned char *)(timer+5);
+	x = *(volatile unsigned char *)(apollo_timer + 3);
+	x = *(volatile unsigned char *)(apollo_timer + 5);
 
 	return IRQ_HANDLED;
 }
@@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
 void dn_sched_init(irq_handler_t timer_routine)
 {
 	/* program timer 1 */
-	*(volatile unsigned char *)(timer+3)=0x01;
-	*(volatile unsigned char *)(timer+1)=0x40;
-	*(volatile unsigned char *)(timer+5)=0x09;
-	*(volatile unsigned char *)(timer+7)=0xc4;
+	*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
+	*(volatile unsigned char *)(apollo_timer + 1) = 0x40;
+	*(volatile unsigned char *)(apollo_timer + 5) = 0x09;
+	*(volatile unsigned char *)(apollo_timer + 7) = 0xc4;
 
 	/* enable IRQ of PIC B */
 	*(volatile unsigned char *)(pica+1)&=(~8);
 
 #if 0
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
+	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
+	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
 #endif
 
 	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index e93fdae10b23..90d3109c82f4 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -67,7 +67,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 66b26c1e848c..8f4f657fdbc6 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -67,7 +67,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 151332515980..4571d33903fe 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -65,7 +65,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 67bb6fc117f4..12f211733ba0 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -65,7 +65,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 3e35ce5fa467..215389a5407f 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -66,7 +66,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ae81e2d190c3..cb9dfb30b674 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -61,7 +61,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 55d394edf633..8d5def4a31e0 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -80,7 +80,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index af773743ee11..e2af46f530c1 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -64,7 +64,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index cdb70d66e535..7c9402b2097f 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -65,7 +65,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 46bed78d0656..19d23db690a4 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -61,7 +61,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 86f7772bafbe..ca6c0b4cab77 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -62,7 +62,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 288261456e1f..c80941c7759e 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -62,7 +62,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 8db25e806947..16d170f53bfd 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -19,6 +19,7 @@
 #include <asm/natfeat.h>
 
 static int stderr_id;
+static struct tty_port nfcon_tty_port;
 static struct tty_driver *nfcon_tty_driver;
 
 static void nfputs(const char *str, unsigned int count)
@@ -119,6 +120,8 @@ static int __init nfcon_init(void)
 {
 	int res;
 
+	tty_port_init(&nfcon_tty_port);
+
 	stderr_id = nf_get_id("NF_STDERR");
 	if (!stderr_id)
 		return -ENODEV;
@@ -135,6 +138,7 @@ static int __init nfcon_init(void)
 	nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
 
 	tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+	tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0);
 	res = tty_register_driver(nfcon_tty_driver);
 	if (res) {
 		pr_err("failed to register nfcon tty driver\n");
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index eafa2539a8ee..a74e5d95c384 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,4 +1,29 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
 
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += device.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += futex.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local64.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += mutex.h
+generic-y += percpu.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += siginfo.h
+generic-y += statfs.h
+generic-y += topology.h
+generic-y += types.h
 generic-y += word-at-a-time.h
+generic-y += xor.h
diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
deleted file mode 100644
index 6bb8f02685a2..000000000000
--- a/arch/m68k/include/asm/MC68332.h
+++ /dev/null
@@ -1,152 +0,0 @@
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR	0xfffa11
-#define PORTE	BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR	0xfffa15
-#define DDRE	BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR	0xfffa17
-#define PEPAR	BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR	0xfffa19
-#define PORTF	BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR	0xfffa1d
-#define DDRF	BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR	0xfffa1f
-#define PFPAR	BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR	0xfffc15
-#define PORTQS	BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR	0xfffc17
-#define DDRQS	BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR	0xfffc16
-#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC	0x0000
-#define CSOR_MODE_SYNC	0x8000
-#define CSOR_MODE_MASK	0x8000
-#define CSOR_BYTE_DISABLE	0x0000
-#define CSOR_BYTE_UPPER		0x4000
-#define CSOR_BYTE_LOWER		0x2000
-#define CSOR_BYTE_BOTH		0x6000
-#define CSOR_BYTE_MASK		0x6000
-#define CSOR_RW_RSVD		0x0000
-#define CSOR_RW_READ		0x0800
-#define CSOR_RW_WRITE		0x1000
-#define CSOR_RW_BOTH		0x1800
-#define CSOR_RW_MASK		0x1800
-#define CSOR_STROBE_DS		0x0400
-#define CSOR_STROBE_AS		0x0000
-#define CSOR_STROBE_MASK	0x0400
-#define CSOR_DSACK_WAIT(x)	(wait << 6)
-#define CSOR_DSACK_FTERM	(14 << 6)
-#define CSOR_DSACK_EXTERNAL	(15 << 6)
-#define CSOR_DSACK_MASK		0x03c0
-#define CSOR_SPACE_CPU		0x0000
-#define CSOR_SPACE_USER		0x0010
-#define CSOR_SPACE_SU		0x0020
-#define CSOR_SPACE_BOTH		0x0030
-#define CSOR_SPACE_MASK		0x0030
-#define CSOR_IPL_ALL		0x0000
-#define CSOR_IPL_PRIORITY(x)	(x << 1)
-#define CSOR_IPL_MASK		0x000e
-#define CSOR_AVEC_ON		0x0001
-#define CSOR_AVEC_OFF		0x0000
-#define CSOR_AVEC_MASK		0x0001
-
-#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
-#define CSBAR_ADDR_MASK		0xfff8
-#define CSBAR_BLKSIZE_2K	0x0000
-#define CSBAR_BLKSIZE_8K	0x0001
-#define CSBAR_BLKSIZE_16K	0x0002
-#define CSBAR_BLKSIZE_64K	0x0003
-#define CSBAR_BLKSIZE_128K	0x0004
-#define CSBAR_BLKSIZE_256K	0x0005
-#define CSBAR_BLKSIZE_512K	0x0006
-#define CSBAR_BLKSIZE_1M	0x0007
-#define CSBAR_BLKSIZE_MASK	0x0007
-
-#define CSPAR_DISC	0
-#define CSPAR_ALT	1
-#define CSPAR_CS8	2
-#define CSPAR_CS16	3
-#define CSPAR_MASK	3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x)	(x << 2)
-#define CSPAR0_CS1(x)	(x << 4)
-#define CSPAR0_CS2(x)	(x << 6)
-#define CSPAR0_CS3(x)	(x << 8)
-#define CSPAR0_CS4(x)	(x << 10)
-#define CSPAR0_CS5(x)	(x << 12)
-
-#define CSPAR1_CS6(x)	(x << 0)
-#define CSPAR1_CS7(x)	(x << 2)
-#define CSPAR1_CS8(x)	(x << 4)
-#define CSPAR1_CS9(x)	(x << 6)
-#define CSPAR1_CS10(x)	(x << 8)
-
-#endif
diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h
deleted file mode 100644
index 954adc851adb..000000000000
--- a/arch/m68k/include/asm/apollodma.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_APOLLO_DMA_H
-#define _ASM_APOLLO_DMA_H
-
-#include <asm/apollohw.h>		/* need byte IO */
-#include <linux/spinlock.h>		/* And spinlocks */
-#include <linux/delay.h>
-
-
-#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
-#define dma_inb(addr)	   (*((volatile unsigned char *)(addr+IO_BASE)))
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x10C00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0x10D00	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		(IO_DMA1_BASE+0x08) /* command register (w) */
-#define DMA1_STAT_REG		(IO_DMA1_BASE+0x08) /* status register (r) */
-#define DMA1_REQ_REG            (IO_DMA1_BASE+0x09) /* request register (w) */
-#define DMA1_MASK_REG		(IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
-#define DMA1_MODE_REG		(IO_DMA1_BASE+0x0B) /* mode register (w) */
-#define DMA1_CLEAR_FF_REG	(IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
-#define DMA1_RESET_REG		(IO_DMA1_BASE+0x0D) /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       (IO_DMA1_BASE+0x0E) /* Clear Mask */
-#define DMA1_MASK_ALL_REG       (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		(IO_DMA2_BASE+0x10) /* command register (w) */
-#define DMA2_STAT_REG		(IO_DMA2_BASE+0x10) /* status register (r) */
-#define DMA2_REQ_REG            (IO_DMA2_BASE+0x12) /* request register (w) */
-#define DMA2_MASK_REG		(IO_DMA2_BASE+0x14) /* single-channel mask (w) */
-#define DMA2_MODE_REG		(IO_DMA2_BASE+0x16) /* mode register (w) */
-#define DMA2_CLEAR_FF_REG	(IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
-#define DMA2_RESET_REG		(IO_DMA2_BASE+0x1A) /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       (IO_DMA2_BASE+0x1C) /* Clear Mask */
-#define DMA2_MASK_ALL_REG       (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
-
-#define DMA_ADDR_0              (IO_DMA1_BASE+0x00) /* DMA address registers */
-#define DMA_ADDR_1              (IO_DMA1_BASE+0x02)
-#define DMA_ADDR_2              (IO_DMA1_BASE+0x04)
-#define DMA_ADDR_3              (IO_DMA1_BASE+0x06)
-#define DMA_ADDR_4              (IO_DMA2_BASE+0x00)
-#define DMA_ADDR_5              (IO_DMA2_BASE+0x04)
-#define DMA_ADDR_6              (IO_DMA2_BASE+0x08)
-#define DMA_ADDR_7              (IO_DMA2_BASE+0x0C)
-
-#define DMA_CNT_0               (IO_DMA1_BASE+0x01)   /* DMA count registers */
-#define DMA_CNT_1               (IO_DMA1_BASE+0x03)
-#define DMA_CNT_2               (IO_DMA1_BASE+0x05)
-#define DMA_CNT_3               (IO_DMA1_BASE+0x07)
-#define DMA_CNT_4               (IO_DMA2_BASE+0x02)
-#define DMA_CNT_5               (IO_DMA2_BASE+0x06)
-#define DMA_CNT_6               (IO_DMA2_BASE+0x0A)
-#define DMA_CNT_7               (IO_DMA2_BASE+0x0E)
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-#define DMA_8BIT 0
-#define DMA_16BIT 1
-#define DMA_BUSMASTER 2
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-/* These are in arch/m68k/apollo/dma.c: */
-extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
-extern void dma_unmap_page(unsigned short dma_addr);
-
-#endif /* _ASM_APOLLO_DMA_H */
diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h
index a1373b9aa281..6c19e0c22411 100644
--- a/arch/m68k/include/asm/apollohw.h
+++ b/arch/m68k/include/asm/apollohw.h
@@ -46,18 +46,6 @@ struct SCN2681 {
 
 };
 
-#if 0
-struct mc146818 {
-
-	unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4,
-		     minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4;
-	unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4,
-		     day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4;
-	unsigned int month1:4, month2:4, year1:4, year2:4, :16;
-
-};
-#endif
-
 struct mc146818 {
         unsigned char second, alarm_second;
         unsigned char minute, alarm_minute;
@@ -98,7 +86,7 @@ extern u_long timer_physaddr;
 #define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
 #define pica (IO_BASE + pica_physaddr)
 #define picb (IO_BASE + picb_physaddr)
-#define timer (IO_BASE + timer_physaddr)
+#define apollo_timer (IO_BASE + timer_physaddr)
 #define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
 
 #define isaIO2mem(x) (((((x) & 0x3f8)  << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0c13b2..000000000000
--- a/arch/m68k/include/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h
index a70d7319630a..4fc738209bd1 100644
--- a/arch/m68k/include/asm/cacheflush.h
+++ b/arch/m68k/include/asm/cacheflush.h
@@ -1,5 +1,5 @@
 #ifdef __uClinux__
-#include "cacheflush_no.h"
+#include <asm/cacheflush_no.h>
 #else
-#include "cacheflush_mm.h"
+#include <asm/cacheflush_mm.h>
 #endif
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index 7cafb537d03c..d2b3935ae147 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -34,10 +34,9 @@ static inline void __clear_cache_all(void)
 {
 #ifdef CACHE_INVALIDATE
 	__asm__ __volatile__ (
-		"movel	%0, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
+		"movec	%0, %%CACR\n\t"
 		"nop\n\t"
-		: : "i" (CACHE_INVALIDATE) : "d0" );
+		: : "r" (CACHE_INVALIDATE) );
 #endif
 }
 
@@ -58,10 +57,9 @@ static inline void __flush_icache_all(void)
 {
 #ifdef CACHE_INVALIDATEI
 	__asm__ __volatile__ (
-		"movel	%0, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
+		"movec	%0, %%CACR\n\t"
 		"nop\n\t"
-		: : "i" (CACHE_INVALIDATEI) : "d0" );
+		: : "r" (CACHE_INVALIDATEI) );
 #endif
 }
 
@@ -72,19 +70,18 @@ static inline void __flush_dcache_all(void)
 #endif
 #ifdef CACHE_INVALIDATED
 	__asm__ __volatile__ (
-		"movel	%0, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
+		"movec	%0, %%CACR\n\t"
 		"nop\n\t"
-		: : "i" (CACHE_INVALIDATED) : "d0" );
+		: : "r" (CACHE_INVALIDATED) );
 #else
-	/* Flush the wrtite buffer */
+	/* Flush the write buffer */
 	__asm__ __volatile__ ( "nop" );
 #endif
 }
 
 /*
  * Push cache entries at supplied address. We want to write back any dirty
- * data and the invalidate the cache lines associated with this address.
+ * data and then invalidate the cache lines associated with this address.
  */
 static inline void cache_push(unsigned long paddr, int len)
 {
diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h
deleted file mode 100644
index c79c5e892305..000000000000
--- a/arch/m68k/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68K_CPUTIME_H
-#define __M68K_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68K_CPUTIME_H */
diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h
index 9c09becfd4c9..12d8fe4f1d30 100644
--- a/arch/m68k/include/asm/delay.h
+++ b/arch/m68k/include/asm/delay.h
@@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops)
 extern void __bad_udelay(void);
 
 
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+#ifdef CONFIG_CPU_HAS_NO_MULDIV64
 /*
  * The simpler m68k and ColdFire processors do not have a 32*32->64
  * multiply instruction. So we need to handle them a little differently.
diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/arch/m68k/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
index e9b7cda59744..f83c1d0a87cf 100644
--- a/arch/m68k/include/asm/elf.h
+++ b/arch/m68k/include/asm/elf.h
@@ -113,6 +113,7 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif
diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/arch/m68k/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h
deleted file mode 100644
index 0d4e188d6ef6..000000000000
--- a/arch/m68k/include/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_ERRNO_H
-#define _M68K_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _M68K_ERRNO_H */
diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/arch/m68k/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
index c7210ba184ea..c70cc9155003 100644
--- a/arch/m68k/include/asm/io.h
+++ b/arch/m68k/include/asm/io.h
@@ -1,5 +1,5 @@
 #ifdef __uClinux__
-#include "io_no.h"
+#include <asm/io_no.h>
 #else
-#include "io_mm.h"
+#include <asm/io_mm.h>
 #endif
diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/arch/m68k/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51cb6d0..000000000000
--- a/arch/m68k/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/m68k/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/m68k/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
deleted file mode 100644
index 3413cc1390ec..000000000000
--- a/arch/m68k/include/asm/kmap_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif	/* __ASM_M68K_KMAP_TYPES_H */
diff --git a/arch/m68k/include/asm/kvm_para.h b/arch/m68k/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f0b957..000000000000
--- a/arch/m68k/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h
deleted file mode 100644
index 6c259263e1f0..000000000000
--- a/arch/m68k/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_LOCAL_H
-#define _ASM_M68K_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _ASM_M68K_LOCAL_H */
diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h
deleted file mode 100644
index 36c93b5cc239..000000000000
--- a/arch/m68k/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 69722366b084..4cf864f5ea7a 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -21,33 +21,33 @@
 /*
  *	Define the 5206 SIM register set addresses.
  */
-#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
-#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
-#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
-#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
+#define	MCFSIM_SIMR		(MCF_MBAR + 0x03)	/* SIM Config reg */
+#define	MCFSIM_ICR1		(MCF_MBAR + 0x14)	/* Intr Ctrl reg 1 */
+#define	MCFSIM_ICR2		(MCF_MBAR + 0x15)	/* Intr Ctrl reg 2 */
+#define	MCFSIM_ICR3		(MCF_MBAR + 0x16)	/* Intr Ctrl reg 3 */
+#define	MCFSIM_ICR4		(MCF_MBAR + 0x17)	/* Intr Ctrl reg 4 */
+#define	MCFSIM_ICR5		(MCF_MBAR + 0x18)	/* Intr Ctrl reg 5 */
+#define	MCFSIM_ICR6		(MCF_MBAR + 0x19)	/* Intr Ctrl reg 6 */
+#define	MCFSIM_ICR7		(MCF_MBAR + 0x1a)	/* Intr Ctrl reg 7 */
+#define	MCFSIM_ICR8		(MCF_MBAR + 0x1b)	/* Intr Ctrl reg 8 */
+#define	MCFSIM_ICR9		(MCF_MBAR + 0x1c)	/* Intr Ctrl reg 9 */
+#define	MCFSIM_ICR10		(MCF_MBAR + 0x1d)	/* Intr Ctrl reg 10 */
+#define	MCFSIM_ICR11		(MCF_MBAR + 0x1e)	/* Intr Ctrl reg 11 */
+#define	MCFSIM_ICR12		(MCF_MBAR + 0x1f)	/* Intr Ctrl reg 12 */
+#define	MCFSIM_ICR13		(MCF_MBAR + 0x20)	/* Intr Ctrl reg 13 */
 #ifdef CONFIG_M5206e
-#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
-#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
+#define	MCFSIM_ICR14		(MCF_MBAR + 0x21)	/* Intr Ctrl reg 14 */
+#define	MCFSIM_ICR15		(MCF_MBAR + 0x22)	/* Intr Ctrl reg 15 */
 #endif
 
-#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
-#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		(MCF_MBAR + 0x36)	/* Interrupt Mask */
+#define	MCFSIM_IPR		(MCF_MBAR + 0x3a)	/* Interrupt Pending */
 
-#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
+#define	MCFSIM_RSR		(MCF_MBAR + 0x40)	/* Reset Status */
+#define	MCFSIM_SYPCR		(MCF_MBAR + 0x41)	/* System Protection */
 
-#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
+#define	MCFSIM_SWIVR		(MCF_MBAR + 0x42)	/* SW Watchdog intr */
+#define	MCFSIM_SWSR		(MCF_MBAR + 0x43)	/* SW Watchdog srv */
 
 #define	MCFSIM_DCRR		(MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */
 #define	MCFSIM_DCTR		(MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */
@@ -58,36 +58,36 @@
 #define	MCFSIM_DMR1		(MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */
 #define	MCFSIM_DCR1		(MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */
 
-#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
-#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
-#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
-#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
-#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
-#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
-#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
-#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
-#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
-#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
-#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
-#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
-#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
-#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
-#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
-#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
-#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
-#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
-#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
-#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
-#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
-#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
-#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
-#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
-#define	MCFSIM_DMCR		0xc6		/* Default control */
+#define	MCFSIM_CSAR0		(MCF_MBAR + 0x64)	/* CS 0 Address reg */
+#define	MCFSIM_CSMR0		(MCF_MBAR + 0x68)	/* CS 0 Mask reg */
+#define	MCFSIM_CSCR0		(MCF_MBAR + 0x6e)	/* CS 0 Control reg */
+#define	MCFSIM_CSAR1		(MCF_MBAR + 0x70)	/* CS 1 Address reg */
+#define	MCFSIM_CSMR1		(MCF_MBAR + 0x74)	/* CS 1 Mask reg */
+#define	MCFSIM_CSCR1		(MCF_MBAR + 0x7a)	/* CS 1 Control reg */
+#define	MCFSIM_CSAR2		(MCF_MBAR + 0x7c)	/* CS 2 Address reg */
+#define	MCFSIM_CSMR2		(MCF_MBAR + 0x80)	/* CS 2 Mask reg */
+#define	MCFSIM_CSCR2		(MCF_MBAR + 0x86)	/* CS 2 Control reg */
+#define	MCFSIM_CSAR3		(MCF_MBAR + 0x88)	/* CS 3 Address reg */
+#define	MCFSIM_CSMR3		(MCF_MBAR + 0x8c)	/* CS 3 Mask reg */
+#define	MCFSIM_CSCR3		(MCF_MBAR + 0x92)	/* CS 3 Control reg */
+#define	MCFSIM_CSAR4		(MCF_MBAR + 0x94)	/* CS 4 Address reg */
+#define	MCFSIM_CSMR4		(MCF_MBAR + 0x98)	/* CS 4 Mask reg */
+#define	MCFSIM_CSCR4		(MCF_MBAR + 0x9e)	/* CS 4 Control reg */
+#define	MCFSIM_CSAR5		(MCF_MBAR + 0xa0)	/* CS 5 Address reg */
+#define	MCFSIM_CSMR5		(MCF_MBAR + 0xa4)	/* CS 5 Mask reg */
+#define	MCFSIM_CSCR5		(MCF_MBAR + 0xaa)	/* CS 5 Control reg */
+#define	MCFSIM_CSAR6		(MCF_MBAR + 0xac)	/* CS 6 Address reg */
+#define	MCFSIM_CSMR6		(MCF_MBAR + 0xb0)	/* CS 6 Mask reg */
+#define	MCFSIM_CSCR6		(MCF_MBAR + 0xb6)	/* CS 6 Control reg */
+#define	MCFSIM_CSAR7		(MCF_MBAR + 0xb8)	/* CS 7 Address reg */
+#define	MCFSIM_CSMR7		(MCF_MBAR + 0xbc)	/* CS 7 Mask reg */
+#define	MCFSIM_CSCR7		(MCF_MBAR + 0xc2)	/* CS 7 Control reg */
+#define	MCFSIM_DMCR		(MCF_MBAR + 0xc6)	/* Default control */
 
 #ifdef CONFIG_M5206e
-#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_PAR		(MCF_MBAR + 0xca)	/* Pin Assignment */
 #else
-#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_PAR		(MCF_MBAR + 0xcb)	/* Pin Assignment */
 #endif
 
 #define	MCFTIMER_BASE1		(MCF_MBAR + 0x100)	/* Base of TIMER1 */
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 91d3abc3f2a5..5e06b4eb57f3 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -176,21 +176,29 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
+#define MCFGPIO_PODR		MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR		MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR		MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR		MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR		MCFGPIO_PCLRR_ADDR
 
-#define MCFGPIO_PIN_MAX			107
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX		107
+#define MCFGPIO_IRQ_MAX		8
+#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
 
 /*
  * Pin Assignment
 */
+#define	MCFGPIO_PAR_AD		(MCF_IPSBAR + 0x100040)
+#define	MCFGPIO_PAR_BUSCTL	(MCF_IPSBAR + 0x100042)
+#define	MCFGPIO_PAR_BS		(MCF_IPSBAR + 0x100044)
+#define	MCFGPIO_PAR_CS		(MCF_IPSBAR + 0x100045)
+#define	MCFGPIO_PAR_SDRAM	(MCF_IPSBAR + 0x100046)
+#define	MCFGPIO_PAR_FECI2C	(MCF_IPSBAR + 0x100047)
+#define	MCFGPIO_PAR_UART	(MCF_IPSBAR + 0x100048)
 #define	MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
 #define	MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
+#define	MCFGPIO_PAR_ETPU	(MCF_IPSBAR + 0x10004E)
 
 /*
  * DMA unit base addresses.
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 7f0c2c3660fd..fdf45e6807c9 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -25,41 +25,41 @@
 /*
  *	Define the 5249 SIM register set addresses.
  */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define	MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
+#define	MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
+#define	MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
+#define	MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog srv */
+#define	MCFSIM_PAR		(MCF_MBAR + 0x04)	/* Pin Assignment */
+#define	MCFSIM_IRQPAR		(MCF_MBAR + 0x06)	/* Intr Assignment */
+#define	MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
+#define	MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
+#define	MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
+#define	MCFSIM_AVR		(MCF_MBAR + 0x4b)	/* Autovector Ctrl */
+#define	MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
+#define	MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
+#define	MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
+#define	MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
+#define	MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
+#define	MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
+#define	MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
+#define	MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
+#define	MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
+#define	MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
+#define	MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
+#define	MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
+
+#define	MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
+#define	MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
+#define	MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
+#define	MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
+#define	MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
+#define	MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
+#define	MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
+#define	MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
+#define	MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
+#define	MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
+#define	MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
+#define	MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
 
 #define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
 #define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
@@ -134,23 +134,23 @@
 #define	MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
 #define	MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
 
-#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
-#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
-#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
+#define	MCFSIM2_GPIOINTSTAT	(MCF_MBAR2 + 0xc0)	/* GPIO intr status */
+#define	MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
+#define	MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
 
-#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
-#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
-#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
-#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
-#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
-#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
-#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
-#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
+#define	MCFSIM2_INTLEVEL1	(MCF_MBAR2 + 0x140)	/* Intr level reg 1 */
+#define	MCFSIM2_INTLEVEL2	(MCF_MBAR2 + 0x144)	/* Intr level reg 2 */
+#define	MCFSIM2_INTLEVEL3	(MCF_MBAR2 + 0x148)	/* Intr level reg 3 */
+#define	MCFSIM2_INTLEVEL4	(MCF_MBAR2 + 0x14c)	/* Intr level reg 4 */
+#define	MCFSIM2_INTLEVEL5	(MCF_MBAR2 + 0x150)	/* Intr level reg 5 */
+#define	MCFSIM2_INTLEVEL6	(MCF_MBAR2 + 0x154)	/* Intr level reg 6 */
+#define	MCFSIM2_INTLEVEL7	(MCF_MBAR2 + 0x158)	/* Intr level reg 7 */
+#define	MCFSIM2_INTLEVEL8	(MCF_MBAR2 + 0x15c)	/* Intr level reg 8 */
 
-#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
+#define	MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)	/* DMA routing */
 
-#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
-#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
+#define	MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
+#define	MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */
 
 /*
  * Define the base interrupt for the second interrupt controller.
diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
index 6da24f653902..acab61cb91ed 100644
--- a/arch/m68k/include/asm/m525xsim.h
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -26,41 +26,41 @@
 /*
  *	Define the 525x SIM register set addresses.
  */
-#define MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
+#define MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
+#define MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
+#define MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog srv */
+#define MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
+#define MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
+#define MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
+#define MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
+#define MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
+#define MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
+#define MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
+#define MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
+#define MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
+#define MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
+#define MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
+#define MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
+#define MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
+#define MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
+#define MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
+
+#define MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
+#define MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
+#define MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
+#define MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
+#define MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
+#define MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
+#define MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
+#define MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
+#define MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
+#define MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
+#define MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
+#define MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
+#define MCFSIM_CSAR4		(MCF_MBAR + 0xb0)	/* CS 4 Address reg */
+#define MCFSIM_CSMR4		(MCF_MBAR + 0xb4)	/* CS 4 Mask reg */
+#define MCFSIM_CSCR4		(MCF_MBAR + 0xba)	/* CS 4 Control reg */
 
 #define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
 #define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index a58f1760d858..1fb01bb05d6c 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -21,52 +21,52 @@
 /*
  *	Define the 5272 SIM register set addresses.
  */
-#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
-#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
-#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
-#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
-#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
-
-#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
-
-#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
-#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
-#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
-#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
-
-#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
-#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
-#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
-#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
-
-#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
-#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
-#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
-#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
-#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
-#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
-#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
-#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
-#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
-#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
-#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
-#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
-#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
-#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
-#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
-#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
-
-#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
-#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
-#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
+#define	MCFSIM_SCR		(MCF_MBAR + 0x04)	/* SIM Config reg */
+#define	MCFSIM_SPR		(MCF_MBAR + 0x06)	/* System Protection */
+#define	MCFSIM_PMR		(MCF_MBAR + 0x08)	/* Power Management */
+#define	MCFSIM_APMR		(MCF_MBAR + 0x0e)	/* Active Low Power */
+#define	MCFSIM_DIR		(MCF_MBAR + 0x10)	/* Device Identity */
+
+#define	MCFSIM_ICR1		(MCF_MBAR + 0x20)	/* Intr Ctrl reg 1 */
+#define	MCFSIM_ICR2		(MCF_MBAR + 0x24)	/* Intr Ctrl reg 2 */
+#define	MCFSIM_ICR3		(MCF_MBAR + 0x28)	/* Intr Ctrl reg 3 */
+#define	MCFSIM_ICR4		(MCF_MBAR + 0x2c)	/* Intr Ctrl reg 4 */
+
+#define	MCFSIM_ISR		(MCF_MBAR + 0x30)	/* Intr Source */
+#define	MCFSIM_PITR		(MCF_MBAR + 0x34)	/* Intr Transition */
+#define	MCFSIM_PIWR		(MCF_MBAR + 0x38)	/* Intr Wakeup */
+#define	MCFSIM_PIVR		(MCF_MBAR + 0x3f)	/* Intr Vector */
+
+#define	MCFSIM_WRRR		(MCF_MBAR + 0x280)	/* Watchdog reference */
+#define	MCFSIM_WIRR		(MCF_MBAR + 0x284)	/* Watchdog interrupt */
+#define	MCFSIM_WCR		(MCF_MBAR + 0x288)	/* Watchdog counter */
+#define	MCFSIM_WER		(MCF_MBAR + 0x28c)	/* Watchdog event */
+
+#define	MCFSIM_CSBR0		(MCF_MBAR + 0x40)	/* CS0 Base Address */
+#define	MCFSIM_CSOR0		(MCF_MBAR + 0x44)	/* CS0 Option */
+#define	MCFSIM_CSBR1		(MCF_MBAR + 0x48)	/* CS1 Base Address */
+#define	MCFSIM_CSOR1		(MCF_MBAR + 0x4c)	/* CS1 Option */
+#define	MCFSIM_CSBR2		(MCF_MBAR + 0x50)	/* CS2 Base Address */
+#define	MCFSIM_CSOR2		(MCF_MBAR + 0x54)	/* CS2 Option */
+#define	MCFSIM_CSBR3		(MCF_MBAR + 0x58)	/* CS3 Base Address */
+#define	MCFSIM_CSOR3		(MCF_MBAR + 0x5c)	/* CS3 Option */
+#define	MCFSIM_CSBR4		(MCF_MBAR + 0x60)	/* CS4 Base Address */
+#define	MCFSIM_CSOR4		(MCF_MBAR + 0x64)	/* CS4 Option */
+#define	MCFSIM_CSBR5		(MCF_MBAR + 0x68)	/* CS5 Base Address */
+#define	MCFSIM_CSOR5		(MCF_MBAR + 0x6c)	/* CS5 Option */
+#define	MCFSIM_CSBR6		(MCF_MBAR + 0x70)	/* CS6 Base Address */
+#define	MCFSIM_CSOR6		(MCF_MBAR + 0x74)	/* CS6 Option */
+#define	MCFSIM_CSBR7		(MCF_MBAR + 0x78)	/* CS7 Base Address */
+#define	MCFSIM_CSOR7		(MCF_MBAR + 0x7c)	/* CS7 Option */
+
+#define	MCFSIM_SDCR		(MCF_MBAR + 0x180)	/* SDRAM Config */
+#define	MCFSIM_SDTR		(MCF_MBAR + 0x184)	/* SDRAM Timing */
+#define	MCFSIM_DCAR0		(MCF_MBAR + 0x4c)	/* DRAM 0 Address */
+#define	MCFSIM_DCMR0		(MCF_MBAR + 0x50)	/* DRAM 0 Mask */
+#define	MCFSIM_DCCR0		(MCF_MBAR + 0x57)	/* DRAM 0 Control */
+#define	MCFSIM_DCAR1		(MCF_MBAR + 0x58)	/* DRAM 1 Address */
+#define	MCFSIM_DCMR1		(MCF_MBAR + 0x5c)	/* DRAM 1 Mask reg */
+#define	MCFSIM_DCCR1		(MCF_MBAR + 0x63)	/* DRAM 1 Control */
 
 #define	MCFUART_BASE0		(MCF_MBAR + 0x100) /* Base address UART0 */
 #define	MCFUART_BASE1		(MCF_MBAR + 0x140) /* Base address UART1 */
@@ -132,8 +132,9 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PIN_MAX			48
-#define MCFGPIO_IRQ_MAX			-1
-#define MCFGPIO_IRQ_VECBASE		-1
+#define MCFGPIO_PIN_MAX		48
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
+
 /****************************************************************************/
 #endif	/* m5272sim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 71aa5104d3d6..1bebbe78055a 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -184,19 +184,33 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
+#define MCFGPIO_PODR		MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR		MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR		MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR		MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR		MCFGPIO_PCLRR_ADDR
 
-#define MCFGPIO_PIN_MAX			100
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX		100
+#define MCFGPIO_IRQ_MAX		8
+#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
 
+/*
+ * Port Pin Assignment registers.
+ */
+#define MCFGPIO_PAR_AD		(MCF_IPSBAR + 0x100040)
+#define MCFGPIO_PAR_BUSCTL	(MCF_IPSBAR + 0x100042)
+#define MCFGPIO_PAR_BS		(MCF_IPSBAR + 0x100044)
+#define MCFGPIO_PAR_CS		(MCF_IPSBAR + 0x100045)
+#define MCFGPIO_PAR_SDRAM	(MCF_IPSBAR + 0x100046)
+#define MCFGPIO_PAR_FECI2C	(MCF_IPSBAR + 0x100047)
+#define MCFGPIO_PAR_UART	(MCF_IPSBAR + 0x100048)
 #define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
 #define MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
-#endif
+
+#define UART0_ENABLE_MASK	0x000f
+#define UART1_ENABLE_MASK	0x0ff0
+#define UART2_ENABLE_MASK	0x3000
+#endif /* CONFIG_M5271 */
 
 #ifdef CONFIG_M5275
 #define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100004)
@@ -279,18 +293,36 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
+#define MCFGPIO_PODR		MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR		MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR		MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR		MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR		MCFGPIO_PCLRR_BUSCTL
 
-#define MCFGPIO_PIN_MAX			148
-#define MCFGPIO_IRQ_MAX			8
-#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX		148
+#define MCFGPIO_IRQ_MAX		8
+#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
 
+/*
+ * Port Pin Assignment registers.
+ */
+#define MCFGPIO_PAR_AD		(MCF_IPSBAR + 0x100070)
+#define MCFGPIO_PAR_CS		(MCF_IPSBAR + 0x100071)
+#define MCFGPIO_PAR_BUSCTL	(MCF_IPSBAR + 0x100072)
+#define MCFGPIO_PAR_USB		(MCF_IPSBAR + 0x100076)
+#define MCFGPIO_PAR_FEC0HL	(MCF_IPSBAR + 0x100078)
+#define MCFGPIO_PAR_FEC1HL	(MCF_IPSBAR + 0x100079)
+#define MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10007A)
+#define MCFGPIO_PAR_UART	(MCF_IPSBAR + 0x10007C)
 #define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10007E)
-#endif
+#define MCFGPIO_PAR_SDRAM	(MCF_IPSBAR + 0x100080)
+#define MCFGPIO_PAR_FECI2C	(MCF_IPSBAR + 0x100082)
+#define MCFGPIO_PAR_BS		(MCF_IPSBAR + 0x100084)
+
+#define UART0_ENABLE_MASK	0x000f
+#define UART1_ENABLE_MASK	0x00f0
+#define UART2_ENABLE_MASK	0x3f00
+#endif /* CONFIG_M5275 */
 
 /*
  * PIT timer base addresses.
@@ -311,22 +343,6 @@
 #define MCFEPORT_EPFR		(MCF_IPSBAR + 0x130006)
 
 /*
- *	GPIO pins setups to enable the UARTs.
- */
-#ifdef CONFIG_M5271
-#define MCF_GPIO_PAR_UART	0x100048	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x0ff0
-#define UART2_ENABLE_MASK	0x3000
-#endif
-#ifdef CONFIG_M5275
-#define MCF_GPIO_PAR_UART	0x10007c	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x00f0
-#define UART2_ENABLE_MASK	0x3f00 
-#endif
-
-/*
  *  Reset Control Unit (relative to IPSBAR).
  */
 #define	MCF_RCR			(MCF_IPSBAR + 0x110000)
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 4acb3c0a642e..cf68ca0ac3a5 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -233,23 +233,6 @@
 #define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
 #define MCFGPIO_PIN_MAX		180
 
-
-/*
- *	Derek Cheung - 6 Feb 2005
- *		add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR	0x10005C
-
-/* Interrupt Mask Register Register Low */ 
-#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
 /*
  *  Reset Control Unit (relative to IPSBAR).
  */
@@ -259,37 +242,5 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
-#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-
+/****************************************************************************/
 #endif	/* m528xsim_h */
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 3bc3adaa7ee0..5d0bb7ec31f8 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -23,71 +23,71 @@
 /*
  *	Define the 5307 SIM register set addresses.
  */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Control Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+#define	MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status reg */
+#define	MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
+#define	MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
+#define	MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog service*/
+#define	MCFSIM_PAR		(MCF_MBAR + 0x04)	/* Pin Assignment */
+#define	MCFSIM_IRQPAR		(MCF_MBAR + 0x06)	/* Itr Assignment */
+#define	MCFSIM_PLLCR		(MCF_MBAR + 0x08)	/* PLL Ctrl Reg */
+#define	MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
+#define	MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pend */
+#define	MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
+#define	MCFSIM_AVR		(MCF_MBAR + 0x4b)	/* Autovector Ctrl */
+#define	MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
+#define	MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
+#define	MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
+#define	MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
+#define	MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
+#define	MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
+#define	MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
+#define	MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
+#define	MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
+#define	MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
+#define	MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
+#define	MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
+
+#define MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
+#define MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
+#define MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
+#define MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
+#define MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
+#define MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
 
 #ifdef CONFIG_OLDMASK
-#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
-#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
-#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#define MCFSIM_CSBAR		(MCF_MBAR + 0x98)	/* CS Base Address */
+#define MCFSIM_CSBAMR		(MCF_MBAR + 0x9c)	/* CS Base Mask */
+#define MCFSIM_CSMR2		(MCF_MBAR + 0x9e)	/* CS 2 Mask reg */
+#define MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
+#define MCFSIM_CSMR3		(MCF_MBAR + 0xaa)	/* CS 3 Mask reg */
+#define MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
+#define MCFSIM_CSMR4		(MCF_MBAR + 0xb6)	/* CS 4 Mask reg */
+#define MCFSIM_CSCR4		(MCF_MBAR + 0xba)	/* CS 4 Control reg */
+#define MCFSIM_CSMR5		(MCF_MBAR + 0xc2)	/* CS 5 Mask reg */
+#define MCFSIM_CSCR5		(MCF_MBAR + 0xc6)	/* CS 5 Control reg */
+#define MCFSIM_CSMR6		(MCF_MBAR + 0xce)	/* CS 6 Mask reg */
+#define MCFSIM_CSCR6		(MCF_MBAR + 0xd2)	/* CS 6 Control reg */
+#define MCFSIM_CSMR7		(MCF_MBAR + 0xda)	/* CS 7 Mask reg */
+#define MCFSIM_CSCR7		(MCF_MBAR + 0xde)	/* CS 7 Control reg */
 #else
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#define MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
+#define MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
+#define MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
+#define MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
+#define MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
+#define MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
+#define MCFSIM_CSAR4		(MCF_MBAR + 0xb0)	/* CS 4 Address reg */
+#define MCFSIM_CSMR4		(MCF_MBAR + 0xb4)	/* CS 4 Mask reg */
+#define MCFSIM_CSCR4		(MCF_MBAR + 0xba)	/* CS 4 Control reg */
+#define MCFSIM_CSAR5		(MCF_MBAR + 0xbc)	/* CS 5 Address reg */
+#define MCFSIM_CSMR5		(MCF_MBAR + 0xc0)	/* CS 5 Mask reg */
+#define MCFSIM_CSCR5		(MCF_MBAR + 0xc6)	/* CS 5 Control reg */
+#define MCFSIM_CSAR6		(MCF_MBAR + 0xc8)	/* CS 6 Address reg */
+#define MCFSIM_CSMR6		(MCF_MBAR + 0xcc)	/* CS 6 Mask reg */
+#define MCFSIM_CSCR6		(MCF_MBAR + 0xd2)	/* CS 6 Control reg */
+#define MCFSIM_CSAR7		(MCF_MBAR + 0xd4)	/* CS 7 Address reg */
+#define MCFSIM_CSMR7		(MCF_MBAR + 0xd8)	/* CS 7 Mask reg */
+#define MCFSIM_CSCR7		(MCF_MBAR + 0xde)	/* CS 7 Control reg */
 #endif /* CONFIG_OLDMASK */
 
 #define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
@@ -127,9 +127,9 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PIN_MAX			16
-#define MCFGPIO_IRQ_MAX			-1
-#define MCFGPIO_IRQ_VECBASE		-1
+#define MCFGPIO_PIN_MAX		16
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
 
 
 /* Definition offset address for CS2-7  -- old mask 5307 */
@@ -167,9 +167,9 @@
 /*
  *       Defines for the IRQPAR Register
  */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
+#define IRQ5_LEVEL4		0x80
+#define IRQ3_LEVEL6		0x40
+#define IRQ1_LEVEL2		0x20
 
 /*
  *	Define system peripheral IRQ usage.
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 5ca7b298c6eb..8668e47ced0e 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -15,10 +15,6 @@
 
 #include <asm/m53xxacr.h>
 
-#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
-#define MCF_REG16(x) (*(volatile unsigned short *)(x))
-#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
-
 #define MCFINT_VECBASE      64
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
@@ -38,7 +34,7 @@
 
 #define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
 
-#define MCF_WTM_WCR	MCF_REG16(0xFC098000)
+#define MCF_WTM_WCR		0xFC098000
 
 /*
  *	Define the 532x SIM register set addresses.
@@ -152,42 +148,6 @@
 #define MCFPM_PPMHR1		0xfc040038
 #define MCFPM_LPCR		0xec090007
 
-/*********************************************************************
- *
- * Inter-IC (I2C) Module
- *
- *********************************************************************/
-
-/* Read/Write access macros for general use */
-#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
-#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
-#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
-#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
-#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF532x_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-#define MCF532x_PAR_FECI2C	(volatile u8 *) (0xFC0A4053)
-
-
 /*
  *	The M5329EVB board needs a help getting its devices initialized 
  *	at kernel start time if dBUG doesn't set it up (for example 
@@ -217,13 +177,13 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
-#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
-#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
-#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
-#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
-#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
-#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
+#define MCF_CCM_CCR               0xFC0A0004
+#define MCF_CCM_RCON              0xFC0A0008
+#define MCF_CCM_CIR               0xFC0A000A
+#define MCF_CCM_MISCCR            0xFC0A0010
+#define MCF_CCM_CDR               0xFC0A0012
+#define MCF_CCM_UHCSR             0xFC0A0014
+#define MCF_CCM_UOCSR             0xFC0A0016
 
 /* Bit definitions and macros for MCF_CCM_CCR */
 #define MCF_CCM_CCR_RESERVED      (0x0001)
@@ -287,104 +247,29 @@
 
 /*********************************************************************
  *
- * DMA Timers (DTIM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
-#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
-#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
-#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
-#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
-#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
-#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
-#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
-#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
-#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
-#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
-#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
-#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
-#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
-#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
-#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
-#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
-#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
-#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
-#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
-#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
-#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
-#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
-#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
-#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
-#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
-#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
-#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
-#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
-#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_DTIM_DTMR */
-#define MCF_DTIM_DTMR_RST        (0x0001)
-#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
-#define MCF_DTIM_DTMR_FRR        (0x0008)
-#define MCF_DTIM_DTMR_ORRI       (0x0010)
-#define MCF_DTIM_DTMR_OM         (0x0020)
-#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
-#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
-#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
-#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
-#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
-#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
-#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
-#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
-#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
-#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
-
-/* Bit definitions and macros for MCF_DTIM_DTXMR */
-#define MCF_DTIM_DTXMR_MODE16    (0x01)
-#define MCF_DTIM_DTXMR_DMAEN     (0x80)
-
-/* Bit definitions and macros for MCF_DTIM_DTER */
-#define MCF_DTIM_DTER_CAP        (0x01)
-#define MCF_DTIM_DTER_REF        (0x02)
-
-/* Bit definitions and macros for MCF_DTIM_DTRR */
-#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCR */
-#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCN */
-#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
  * FlexBus Chip Selects (FBCS)
  *
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_FBCS0_CSAR		MCF_REG32(0xFC008000)
-#define MCF_FBCS0_CSMR		MCF_REG32(0xFC008004)
-#define MCF_FBCS0_CSCR		MCF_REG32(0xFC008008)
-#define MCF_FBCS1_CSAR		MCF_REG32(0xFC00800C)
-#define MCF_FBCS1_CSMR		MCF_REG32(0xFC008010)
-#define MCF_FBCS1_CSCR		MCF_REG32(0xFC008014)
-#define MCF_FBCS2_CSAR		MCF_REG32(0xFC008018)
-#define MCF_FBCS2_CSMR		MCF_REG32(0xFC00801C)
-#define MCF_FBCS2_CSCR		MCF_REG32(0xFC008020)
-#define MCF_FBCS3_CSAR		MCF_REG32(0xFC008024)
-#define MCF_FBCS3_CSMR		MCF_REG32(0xFC008028)
-#define MCF_FBCS3_CSCR		MCF_REG32(0xFC00802C)
-#define MCF_FBCS4_CSAR		MCF_REG32(0xFC008030)
-#define MCF_FBCS4_CSMR		MCF_REG32(0xFC008034)
-#define MCF_FBCS4_CSCR		MCF_REG32(0xFC008038)
-#define MCF_FBCS5_CSAR		MCF_REG32(0xFC00803C)
-#define MCF_FBCS5_CSMR		MCF_REG32(0xFC008040)
-#define MCF_FBCS5_CSCR		MCF_REG32(0xFC008044)
-#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))
-#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))
-#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))
+#define MCF_FBCS0_CSAR		0xFC008000
+#define MCF_FBCS0_CSMR		0xFC008004
+#define MCF_FBCS0_CSCR		0xFC008008
+#define MCF_FBCS1_CSAR		0xFC00800C
+#define MCF_FBCS1_CSMR		0xFC008010
+#define MCF_FBCS1_CSCR		0xFC008014
+#define MCF_FBCS2_CSAR		0xFC008018
+#define MCF_FBCS2_CSMR		0xFC00801C
+#define MCF_FBCS2_CSCR		0xFC008020
+#define MCF_FBCS3_CSAR		0xFC008024
+#define MCF_FBCS3_CSMR		0xFC008028
+#define MCF_FBCS3_CSCR		0xFC00802C
+#define MCF_FBCS4_CSAR		0xFC008030
+#define MCF_FBCS4_CSMR		0xFC008034
+#define MCF_FBCS4_CSCR		0xFC008038
+#define MCF_FBCS5_CSAR		0xFC00803C
+#define MCF_FBCS5_CSMR		0xFC008040
+#define MCF_FBCS5_CSCR		0xFC008044
 
 /* Bit definitions and macros for MCF_FBCS_CSAR */
 #define MCF_FBCS_CSAR_BA(x)	((x)&0xFFFF0000)
@@ -501,32 +386,32 @@
 #define MCFGPIO_PCLRR_LCDDATAL		(0xFC0A404B)
 #define MCFGPIO_PCLRR_LCDCTLH		(0xFC0A404C)
 #define MCFGPIO_PCLRR_LCDCTLL		(0xFC0A404D)
-#define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
-#define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
-#define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
-#define MCF_GPIO_PAR_FECI2C		MCF_REG08(0xFC0A4053)
-#define MCF_GPIO_PAR_BE			MCF_REG08(0xFC0A4054)
-#define MCF_GPIO_PAR_CS			MCF_REG08(0xFC0A4055)
-#define MCF_GPIO_PAR_SSI		MCF_REG16(0xFC0A4056)
-#define MCF_GPIO_PAR_UART		MCF_REG16(0xFC0A4058)
-#define MCF_GPIO_PAR_QSPI		MCF_REG16(0xFC0A405A)
-#define MCF_GPIO_PAR_TIMER		MCF_REG08(0xFC0A405C)
-#define MCF_GPIO_PAR_LCDDATA		MCF_REG08(0xFC0A405D)
-#define MCF_GPIO_PAR_LCDCTL		MCF_REG16(0xFC0A405E)
-#define MCF_GPIO_PAR_IRQ		MCF_REG16(0xFC0A4060)
-#define MCF_GPIO_MSCR_FLEXBUS		MCF_REG08(0xFC0A4064)
-#define MCF_GPIO_MSCR_SDRAM		MCF_REG08(0xFC0A4065)
-#define MCF_GPIO_DSCR_I2C		MCF_REG08(0xFC0A4068)
-#define MCF_GPIO_DSCR_PWM		MCF_REG08(0xFC0A4069)
-#define MCF_GPIO_DSCR_FEC		MCF_REG08(0xFC0A406A)
-#define MCF_GPIO_DSCR_UART		MCF_REG08(0xFC0A406B)
-#define MCF_GPIO_DSCR_QSPI		MCF_REG08(0xFC0A406C)
-#define MCF_GPIO_DSCR_TIMER		MCF_REG08(0xFC0A406D)
-#define MCF_GPIO_DSCR_SSI		MCF_REG08(0xFC0A406E)
-#define MCF_GPIO_DSCR_LCD		MCF_REG08(0xFC0A406F)
-#define MCF_GPIO_DSCR_DEBUG		MCF_REG08(0xFC0A4070)
-#define MCF_GPIO_DSCR_CLKRST		MCF_REG08(0xFC0A4071)
-#define MCF_GPIO_DSCR_IRQ		MCF_REG08(0xFC0A4072)
+#define MCFGPIO_PAR_FEC			(0xFC0A4050)
+#define MCFGPIO_PAR_PWM			(0xFC0A4051)
+#define MCFGPIO_PAR_BUSCTL		(0xFC0A4052)
+#define MCFGPIO_PAR_FECI2C		(0xFC0A4053)
+#define MCFGPIO_PAR_BE			(0xFC0A4054)
+#define MCFGPIO_PAR_CS			(0xFC0A4055)
+#define MCFGPIO_PAR_SSI			(0xFC0A4056)
+#define MCFGPIO_PAR_UART		(0xFC0A4058)
+#define MCFGPIO_PAR_QSPI		(0xFC0A405A)
+#define MCFGPIO_PAR_TIMER		(0xFC0A405C)
+#define MCFGPIO_PAR_LCDDATA		(0xFC0A405D)
+#define MCFGPIO_PAR_LCDCTL		(0xFC0A405E)
+#define MCFGPIO_PAR_IRQ			(0xFC0A4060)
+#define MCFGPIO_MSCR_FLEXBUS		(0xFC0A4064)
+#define MCFGPIO_MSCR_SDRAM		(0xFC0A4065)
+#define MCFGPIO_DSCR_I2C		(0xFC0A4068)
+#define MCFGPIO_DSCR_PWM		(0xFC0A4069)
+#define MCFGPIO_DSCR_FEC		(0xFC0A406A)
+#define MCFGPIO_DSCR_UART		(0xFC0A406B)
+#define MCFGPIO_DSCR_QSPI		(0xFC0A406C)
+#define MCFGPIO_DSCR_TIMER		(0xFC0A406D)
+#define MCFGPIO_DSCR_SSI		(0xFC0A406E)
+#define MCFGPIO_DSCR_LCD		(0xFC0A406F)
+#define MCFGPIO_DSCR_DEBUG		(0xFC0A4070)
+#define MCFGPIO_DSCR_CLKRST		(0xFC0A4071)
+#define MCFGPIO_DSCR_IRQ		(0xFC0A4072)
 
 /* Bit definitions and macros for MCF_GPIO_PODR_FECH */
 #define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
@@ -1215,709 +1100,6 @@
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
 
-
-/*********************************************************************
- *
- * Interrupt Controller (INTC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
-#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
-#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
-#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
-#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
-#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
-#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
-#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
-#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
-#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
-#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
-#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
-#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
-#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
-#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
-#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
-#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
-#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
-#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
-#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
-#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
-#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
-#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
-#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
-#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
-#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
-#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
-#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
-#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
-#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
-#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
-#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
-#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
-#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
-#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
-#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
-#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
-#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
-#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
-#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
-#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
-#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
-#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
-#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
-#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
-#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
-#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
-#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
-#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
-#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
-#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
-#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
-#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
-#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
-#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
-#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
-#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
-#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
-#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
-#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
-#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
-#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
-#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
-#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
-#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
-#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
-#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
-#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
-#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
-#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
-#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
-#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
-#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
-#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
-#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
-#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
-#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
-#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
-#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
-#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
-#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
-#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
-#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
-#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
-#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
-#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
-#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
-#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
-#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
-#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
-#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
-#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
-#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
-#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
-#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
-#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
-#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
-#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
-#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
-#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
-#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
-#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
-#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
-#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
-#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
-#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
-#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
-#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
-#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
-#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
-#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
-#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
-#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
-#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
-#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
-#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
-#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
-#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
-#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
-#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
-#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
-#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
-#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
-#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
-#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
-#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
-#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
-#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
-#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
-#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
-#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
-#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
-#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
-#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
-#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
-#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
-#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
-#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
-#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
-#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
-#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
-#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
-#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
-#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
-#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
-#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
-#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
-#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
-#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
-#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
-#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
-#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
-#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
-#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
-#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
-#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
-#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
-#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
-#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
-#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
-#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
-#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
-#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
-#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
-#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
-#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
-#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
-#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
-#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
-#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
-#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
-#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
-#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
-#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
-#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
-#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
-#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
-#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
-#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
-#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
-#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
-#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
-#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
-#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
-#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
-#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
-#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
-#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
-#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
-#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
-#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
-#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
-#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
-#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
-#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
-#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
-#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
-#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
-#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
-#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
-#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
-#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
-#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
-#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
-#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
-#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
-#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
-#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
-#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
-#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
-#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
-#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
-#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
-#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
-#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
-#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
-#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
-#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
-#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
-#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
-#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
-#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
-#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
-#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
-#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
-#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
-#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
-#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
-#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
-#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
-#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
-#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
-#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
-#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
-#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
-#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
-#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
-#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
-#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
-#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
-#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
-#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
-#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
-#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
-#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
-#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
-#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
-#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
-#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
-#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
-#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
-#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
-#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_INTC_IPRH */
-#define MCF_INTC_IPRH_INT32        (0x00000001)
-#define MCF_INTC_IPRH_INT33        (0x00000002)
-#define MCF_INTC_IPRH_INT34        (0x00000004)
-#define MCF_INTC_IPRH_INT35        (0x00000008)
-#define MCF_INTC_IPRH_INT36        (0x00000010)
-#define MCF_INTC_IPRH_INT37        (0x00000020)
-#define MCF_INTC_IPRH_INT38        (0x00000040)
-#define MCF_INTC_IPRH_INT39        (0x00000080)
-#define MCF_INTC_IPRH_INT40        (0x00000100)
-#define MCF_INTC_IPRH_INT41        (0x00000200)
-#define MCF_INTC_IPRH_INT42        (0x00000400)
-#define MCF_INTC_IPRH_INT43        (0x00000800)
-#define MCF_INTC_IPRH_INT44        (0x00001000)
-#define MCF_INTC_IPRH_INT45        (0x00002000)
-#define MCF_INTC_IPRH_INT46        (0x00004000)
-#define MCF_INTC_IPRH_INT47        (0x00008000)
-#define MCF_INTC_IPRH_INT48        (0x00010000)
-#define MCF_INTC_IPRH_INT49        (0x00020000)
-#define MCF_INTC_IPRH_INT50        (0x00040000)
-#define MCF_INTC_IPRH_INT51        (0x00080000)
-#define MCF_INTC_IPRH_INT52        (0x00100000)
-#define MCF_INTC_IPRH_INT53        (0x00200000)
-#define MCF_INTC_IPRH_INT54        (0x00400000)
-#define MCF_INTC_IPRH_INT55        (0x00800000)
-#define MCF_INTC_IPRH_INT56        (0x01000000)
-#define MCF_INTC_IPRH_INT57        (0x02000000)
-#define MCF_INTC_IPRH_INT58        (0x04000000)
-#define MCF_INTC_IPRH_INT59        (0x08000000)
-#define MCF_INTC_IPRH_INT60        (0x10000000)
-#define MCF_INTC_IPRH_INT61        (0x20000000)
-#define MCF_INTC_IPRH_INT62        (0x40000000)
-#define MCF_INTC_IPRH_INT63        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IPRL */
-#define MCF_INTC_IPRL_INT0         (0x00000001)
-#define MCF_INTC_IPRL_INT1         (0x00000002)
-#define MCF_INTC_IPRL_INT2         (0x00000004)
-#define MCF_INTC_IPRL_INT3         (0x00000008)
-#define MCF_INTC_IPRL_INT4         (0x00000010)
-#define MCF_INTC_IPRL_INT5         (0x00000020)
-#define MCF_INTC_IPRL_INT6         (0x00000040)
-#define MCF_INTC_IPRL_INT7         (0x00000080)
-#define MCF_INTC_IPRL_INT8         (0x00000100)
-#define MCF_INTC_IPRL_INT9         (0x00000200)
-#define MCF_INTC_IPRL_INT10        (0x00000400)
-#define MCF_INTC_IPRL_INT11        (0x00000800)
-#define MCF_INTC_IPRL_INT12        (0x00001000)
-#define MCF_INTC_IPRL_INT13        (0x00002000)
-#define MCF_INTC_IPRL_INT14        (0x00004000)
-#define MCF_INTC_IPRL_INT15        (0x00008000)
-#define MCF_INTC_IPRL_INT16        (0x00010000)
-#define MCF_INTC_IPRL_INT17        (0x00020000)
-#define MCF_INTC_IPRL_INT18        (0x00040000)
-#define MCF_INTC_IPRL_INT19        (0x00080000)
-#define MCF_INTC_IPRL_INT20        (0x00100000)
-#define MCF_INTC_IPRL_INT21        (0x00200000)
-#define MCF_INTC_IPRL_INT22        (0x00400000)
-#define MCF_INTC_IPRL_INT23        (0x00800000)
-#define MCF_INTC_IPRL_INT24        (0x01000000)
-#define MCF_INTC_IPRL_INT25        (0x02000000)
-#define MCF_INTC_IPRL_INT26        (0x04000000)
-#define MCF_INTC_IPRL_INT27        (0x08000000)
-#define MCF_INTC_IPRL_INT28        (0x10000000)
-#define MCF_INTC_IPRL_INT29        (0x20000000)
-#define MCF_INTC_IPRL_INT30        (0x40000000)
-#define MCF_INTC_IPRL_INT31        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRH */
-#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
-#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
-#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
-#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
-#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
-#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
-#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
-#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
-#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
-#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
-#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
-#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
-#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
-#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
-#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
-#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
-#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
-#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
-#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
-#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
-#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
-#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
-#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
-#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
-#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
-#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
-#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
-#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
-#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
-#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
-#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
-#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRL */
-#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
-#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
-#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
-#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
-#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
-#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
-#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
-#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
-#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
-#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
-#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
-#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
-#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
-#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
-#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
-#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
-#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
-#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
-#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
-#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
-#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
-#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
-#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
-#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
-#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
-#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
-#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
-#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
-#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
-#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
-#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
-#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCH */
-#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
-#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
-#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
-#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
-#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
-#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
-#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
-#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
-#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
-#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
-#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
-#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
-#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
-#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
-#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
-#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
-#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
-#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
-#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
-#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
-#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
-#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
-#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
-#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
-#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
-#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
-#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
-#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
-#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
-#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
-#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
-#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCL */
-#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
-#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
-#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
-#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
-#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
-#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
-#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
-#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
-#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
-#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
-#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
-#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
-#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
-#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
-#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
-#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
-#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
-#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
-#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
-#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
-#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
-#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
-#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
-#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
-#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
-#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
-#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
-#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
-#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
-#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
-#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
-#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_ICONFIG */
-#define MCF_INTC_ICONFIG_EMASK     (0x0020)
-#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
-#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
-#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
-#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
-#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
-#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
-#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
-
-/* Bit definitions and macros for MCF_INTC_SIMR */
-#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CIMR */
-#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CLMASK */
-#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SLMASK */
-#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_ICR */
-#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SWIACK */
-#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_INTC_LIACK */
-#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
-
-/********************************************************************/
-/*********************************************************************
-*
-* LCD Controller (LCDC)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
-#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
-#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
-#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
-#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
-#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
-#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
-#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
-#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
-#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
-#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
-#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
-#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
-#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
-#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
-#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
-#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
-#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
-#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
-#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
-#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
-#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
-#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
-#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
-#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
-#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
-
-/* Bit definitions and macros for MCF_LCDC_LSSAR */
-#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LSR */
-#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LVPWR */
-#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LCPR */
-#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
-#define MCF_LCDC_LCPR_OP                (0x10000000)
-#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
-#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
-#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
-#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
-#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
-#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
-#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCWHBR */
-#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
-#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCCMR */
-#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for MCF_LCDC_LPCR */
-#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LPCR_SHARP             (0x00000040)
-#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
-#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
-#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
-#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
-#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
-#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
-#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
-#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
-#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
-#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
-#define MCF_LCDC_LPCR_FLM               (0x00800000)
-#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
-#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
-#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
-#define MCF_LCDC_LPCR_COLOR             (0x40000000)
-#define MCF_LCDC_LPCR_TFT               (0x80000000)
-#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
-#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
-#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
-#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
-#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
-#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
-#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
-#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
-#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
-#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
-#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
-#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
-#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
-#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
-
-#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
-
-/* Bit definitions and macros for MCF_LCDC_LHCR */
-#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LVCR */
-#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LPOR */
-#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LPCCR */
-#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
-#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
-#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
-#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
-#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
-#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
-#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
-
-/* Bit definitions and macros for MCF_LCDC_LDCR */
-#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LDCR_BURST             (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LRMCR */
-#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
-
-/* Bit definitions and macros for MCF_LCDC_LICR */
-#define MCF_LCDC_LICR_INTCON            (0x00000001)
-#define MCF_LCDC_LICR_INTSYN            (0x00000004)
-#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
-
-/* Bit definitions and macros for MCF_LCDC_LIER */
-#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
-#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
-#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
-#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
-#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
-#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
-#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
-#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LISR */
-#define MCF_LCDC_LISR_BOF               (0x00000001)
-#define MCF_LCDC_LISR_EOF               (0x00000002)
-#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
-#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
-#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
-#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
-#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
-#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSAR */
-#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSR */
-#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
-#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPOR */
-#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPR */
-#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for MCF_LCDC_LGWCR */
-#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
-#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
-#define MCF_LCDC_LGWCR_GWE              (0x00400000)
-#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
-#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for MCF_LCDC_LGWDCR */
-#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LSCR */
-#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
-#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
-#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
-#define MCF_LCDC_LSCR_GRAY_2(x)  		  (((x)&0x0000000F)<<4)
-#define MCF_LCDC_LSCR_GRAY_1(x)  		  (((x)&0x0000000F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
-#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
-#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
 /*********************************************************************
  *
  * Phase Locked Loop (PLL)
@@ -1925,10 +1107,10 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
-#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
-#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
-#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
+#define MCF_PLL_PODR              0xFC0C0000
+#define MCF_PLL_PLLCR             0xFC0C0004
+#define MCF_PLL_PMDR              0xFC0C0008
+#define MCF_PLL_PFDR              0xFC0C000C
 
 /* Bit definitions and macros for MCF_PLL_PODR */
 #define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
@@ -1951,15 +1133,15 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_SCM_MPR			MCF_REG32(0xFC000000)
-#define MCF_SCM_PACRA			MCF_REG32(0xFC000020)
-#define MCF_SCM_PACRB			MCF_REG32(0xFC000024)
-#define MCF_SCM_PACRC			MCF_REG32(0xFC000028)
-#define MCF_SCM_PACRD			MCF_REG32(0xFC00002C)
-#define MCF_SCM_PACRE			MCF_REG32(0xFC000040)
-#define MCF_SCM_PACRF			MCF_REG32(0xFC000044)
+#define MCF_SCM_MPR			0xFC000000
+#define MCF_SCM_PACRA			0xFC000020
+#define MCF_SCM_PACRB			0xFC000024
+#define MCF_SCM_PACRC			0xFC000028
+#define MCF_SCM_PACRD			0xFC00002C
+#define MCF_SCM_PACRE			0xFC000040
+#define MCF_SCM_PACRF			0xFC000044
 
-#define MCF_SCM_BCR			MCF_REG32(0xFC040024)
+#define MCF_SCM_BCR			0xFC040024
 
 /*********************************************************************
  *
@@ -1968,17 +1150,16 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_SDRAMC_SDMR			MCF_REG32(0xFC0B8000)
-#define MCF_SDRAMC_SDCR			MCF_REG32(0xFC0B8004)
-#define MCF_SDRAMC_SDCFG1		MCF_REG32(0xFC0B8008)
-#define MCF_SDRAMC_SDCFG2		MCF_REG32(0xFC0B800C)
-#define MCF_SDRAMC_LIMP_FIX		MCF_REG32(0xFC0B8080)
-#define MCF_SDRAMC_SDDS			MCF_REG32(0xFC0B8100)
-#define MCF_SDRAMC_SDCS0		MCF_REG32(0xFC0B8110)
-#define MCF_SDRAMC_SDCS1		MCF_REG32(0xFC0B8114)
-#define MCF_SDRAMC_SDCS2		MCF_REG32(0xFC0B8118)
-#define MCF_SDRAMC_SDCS3		MCF_REG32(0xFC0B811C)
-#define MCF_SDRAMC_SDCS(x)		MCF_REG32(0xFC0B8110+((x)*0x004))
+#define MCF_SDRAMC_SDMR			0xFC0B8000
+#define MCF_SDRAMC_SDCR			0xFC0B8004
+#define MCF_SDRAMC_SDCFG1		0xFC0B8008
+#define MCF_SDRAMC_SDCFG2		0xFC0B800C
+#define MCF_SDRAMC_LIMP_FIX		0xFC0B8080
+#define MCF_SDRAMC_SDDS			0xFC0B8100
+#define MCF_SDRAMC_SDCS0		0xFC0B8110
+#define MCF_SDRAMC_SDCS1		0xFC0B8114
+#define MCF_SDRAMC_SDCS2		0xFC0B8118
+#define MCF_SDRAMC_SDCS3		0xFC0B811C
 
 /* Bit definitions and macros for MCF_SDRAMC_SDMR */
 #define MCF_SDRAMC_SDMR_CMD		(0x00010000)
@@ -2046,143 +1227,9 @@
 #define MCF_SDRAMC_SDCS_CSSZ_2GBYTE	(0x0000001E)
 #define MCF_SDRAMC_SDCS_CSSZ_4GBYTE	(0x0000001F)
 
-/*********************************************************************
- *
- *      FlexCAN module registers
- *
- *********************************************************************/
-#define MCF_FLEXCAN_BASEADDR(x)		(0xFC020000+(x)*0x0800)
-#define MCF_FLEXCAN_CANMCR(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x00)
-#define MCF_FLEXCAN_CANCTRL(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x04)
-#define MCF_FLEXCAN_TIMER(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x08)
-#define MCF_FLEXCAN_RXGMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x10)
-#define MCF_FLEXCAN_RX14MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x14)
-#define MCF_FLEXCAN_RX15MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x18)
-#define MCF_FLEXCAN_ERRCNT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
-#define MCF_FLEXCAN_ERRSTAT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x20)
-#define MCF_FLEXCAN_IMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x28)
-#define MCF_FLEXCAN_IFLAG(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x30)
-
-#define MCF_FLEXCAN_MB_CNT(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
-#define MCF_FLEXCAN_MB_ID(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
-#define MCF_FLEXCAN_MB_DB(x,y,z)	MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
-
-/*
- *      FlexCAN Module Configuration Register
- */
-#define CANMCR_MDIS		(0x80000000)
-#define CANMCR_FRZ		(0x40000000)
-#define CANMCR_HALT		(0x10000000)
-#define CANMCR_SOFTRST		(0x02000000)
-#define CANMCR_FRZACK		(0x01000000)
-#define CANMCR_SUPV		(0x00800000)
-#define CANMCR_MAXMB(x)         ((x)&0x0F)
-
-/*
- *      FlexCAN Control Register
- */
-#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK         (0x00008000)
-#define CANCTRL_ERRMSK	        (0x00004000)
-#define CANCTRL_CLKSRC		(0x00002000)
-#define CANCTRL_LPB	        (0x00001000)
-#define CANCTRL_SAMP	        (0x00000080)
-#define CANCTRL_BOFFREC         (0x00000040)
-#define CANCTRL_TSYNC           (0x00000020)
-#define CANCTRL_LBUF            (0x00000010)
-#define CANCTRL_LOM             (0x00000008)
-#define CANCTRL_PROPSEG(x)      ((x)&0x07)
-
-/*
- *      FlexCAN Error Counter Register
- */
-#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
-#define ERRCNT_TXECTR(x)        ((x)&0xFF)
-
-/*
- *      FlexCAN Error and Status Register
- */
-#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
-#define ERRSTAT_ACKERR           (0x00002000)
-#define ERRSTAT_CRCERR           (0x00001000)
-#define ERRSTAT_FRMERR           (0x00000800)
-#define ERRSTAT_STFERR           (0x00000400)
-#define ERRSTAT_TXWRN            (0x00000200)
-#define ERRSTAT_RXWRN            (0x00000100)
-#define ERRSTAT_IDLE             (0x00000080)
-#define ERRSTAT_TXRX             (0x00000040)
-#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
-#define ERRSTAT_BOFFINT          (0x00000004)
-#define ERRSTAT_ERRINT           (0x00000002)
-
 /*
- *      Interrupt Mask Register
- */
-#define IMASK_BUF15M		(0x8000)
-#define IMASK_BUF14M		(0x4000)
-#define IMASK_BUF13M		(0x2000)
-#define IMASK_BUF12M		(0x1000)
-#define IMASK_BUF11M		(0x0800)
-#define IMASK_BUF10M		(0x0400)
-#define IMASK_BUF9M		(0x0200)
-#define IMASK_BUF8M		(0x0100)
-#define IMASK_BUF7M		(0x0080)
-#define IMASK_BUF6M		(0x0040)
-#define IMASK_BUF5M		(0x0020)
-#define IMASK_BUF4M		(0x0010)
-#define IMASK_BUF3M		(0x0008)
-#define IMASK_BUF2M		(0x0004)
-#define IMASK_BUF1M		(0x0002)
-#define IMASK_BUF0M		(0x0001)
-#define IMASK_BUFnM(x)		(0x1<<(x))
-#define IMASK_BUFF_ENABLE_ALL	(0x1111)
-#define IMASK_BUFF_DISABLE_ALL	(0x0000)
-
-/*
- *      Interrupt Flag Register
- */
-#define IFLAG_BUF15M		(0x8000)
-#define IFLAG_BUF14M		(0x4000)
-#define IFLAG_BUF13M		(0x2000)
-#define IFLAG_BUF12M		(0x1000)
-#define IFLAG_BUF11M		(0x0800)
-#define IFLAG_BUF10M		(0x0400)
-#define IFLAG_BUF9M		(0x0200)
-#define IFLAG_BUF8M		(0x0100)
-#define IFLAG_BUF7M		(0x0080)
-#define IFLAG_BUF6M		(0x0040)
-#define IFLAG_BUF5M		(0x0020)
-#define IFLAG_BUF4M		(0x0010)
-#define IFLAG_BUF3M		(0x0008)
-#define IFLAG_BUF2M		(0x0004)
-#define IFLAG_BUF1M		(0x0002)
-#define IFLAG_BUF0M		(0x0001)
-#define IFLAG_BUFF_SET_ALL	(0xFFFF)
-#define IFLAG_BUFF_CLEAR_ALL	(0x0000)
-#define IFLAG_BUFnM(x)		(0x1<<(x))
-
-/*
- *      Message Buffers
- */
-#define MB_CNT_CODE(x)		(((x)&0x0F)<<24)
-#define MB_CNT_SRR		(0x00400000)
-#define MB_CNT_IDE		(0x00200000)
-#define MB_CNT_RTR		(0x00100000)
-#define MB_CNT_LENGTH(x)	(((x)&0x0F)<<16)
-#define MB_CNT_TIMESTAMP(x)	((x)&0xFFFF)
-#define MB_ID_STD(x)		(((x)&0x07FF)<<18)
-#define MB_ID_EXT(x)		((x)&0x3FFFF)
-
-/*********************************************************************
- *
  * Edge Port Module (EPORT)
- *
- *********************************************************************/
-
-/* Register read/write macros */
+ */
 #define MCFEPORT_EPPAR                (0xFC094000)
 #define MCFEPORT_EPDDR                (0xFC094002)
 #define MCFEPORT_EPIER                (0xFC094003)
@@ -2190,91 +1237,5 @@
 #define MCFEPORT_EPPDR                (0xFC094005)
 #define MCFEPORT_EPFR                 (0xFC094006)
 
-/* Bit definitions and macros for MCF_EPORT_EPPAR */
-#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
-#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
-#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
-#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
-#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
-#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
-#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
-#define MCF_EPORT_EPPAR_LEVEL          (0)
-#define MCF_EPORT_EPPAR_RISING         (1)
-#define MCF_EPORT_EPPAR_FALLING        (2)
-#define MCF_EPORT_EPPAR_BOTH           (3)
-#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
-#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
-#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
-#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
-#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
-#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
-#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
-#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
-#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
-#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
-#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
-#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
-#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
-#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
-#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
-#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
-#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
-#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
-#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
-#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
-#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
-
-/* Bit definitions and macros for MCF_EPORT_EPDDR */
-#define MCF_EPORT_EPDDR_EPDD1          (0x02)
-#define MCF_EPORT_EPDDR_EPDD2          (0x04)
-#define MCF_EPORT_EPDDR_EPDD3          (0x08)
-#define MCF_EPORT_EPDDR_EPDD4          (0x10)
-#define MCF_EPORT_EPDDR_EPDD5          (0x20)
-#define MCF_EPORT_EPDDR_EPDD6          (0x40)
-#define MCF_EPORT_EPDDR_EPDD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPIER */
-#define MCF_EPORT_EPIER_EPIE1          (0x02)
-#define MCF_EPORT_EPIER_EPIE2          (0x04)
-#define MCF_EPORT_EPIER_EPIE3          (0x08)
-#define MCF_EPORT_EPIER_EPIE4          (0x10)
-#define MCF_EPORT_EPIER_EPIE5          (0x20)
-#define MCF_EPORT_EPIER_EPIE6          (0x40)
-#define MCF_EPORT_EPIER_EPIE7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPDR */
-#define MCF_EPORT_EPDR_EPD1            (0x02)
-#define MCF_EPORT_EPDR_EPD2            (0x04)
-#define MCF_EPORT_EPDR_EPD3            (0x08)
-#define MCF_EPORT_EPDR_EPD4            (0x10)
-#define MCF_EPORT_EPDR_EPD5            (0x20)
-#define MCF_EPORT_EPDR_EPD6            (0x40)
-#define MCF_EPORT_EPDR_EPD7            (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPPDR */
-#define MCF_EPORT_EPPDR_EPPD1          (0x02)
-#define MCF_EPORT_EPPDR_EPPD2          (0x04)
-#define MCF_EPORT_EPPDR_EPPD3          (0x08)
-#define MCF_EPORT_EPPDR_EPPD4          (0x10)
-#define MCF_EPORT_EPPDR_EPPD5          (0x20)
-#define MCF_EPORT_EPPDR_EPPD6          (0x40)
-#define MCF_EPORT_EPPDR_EPPD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPFR */
-#define MCF_EPORT_EPFR_EPF1            (0x02)
-#define MCF_EPORT_EPFR_EPF2            (0x04)
-#define MCF_EPORT_EPFR_EPF3            (0x08)
-#define MCF_EPORT_EPFR_EPF4            (0x10)
-#define MCF_EPORT_EPFR_EPF5            (0x20)
-#define MCF_EPORT_EPFR_EPF6            (0x40)
-#define MCF_EPORT_EPFR_EPF7            (0x80)
-
 /********************************************************************/
 #endif	/* m532xsim_h */
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 79f58dd6a83d..a7550bc5cd1e 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -23,55 +23,55 @@
 /*
  *	Define the 5407 SIM register set addresses.
  */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Control Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#define	MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
+#define	MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
+#define	MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
+#define	MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog service*/
+#define	MCFSIM_PAR		(MCF_MBAR + 0x04)	/* Pin Assignment */
+#define	MCFSIM_IRQPAR		(MCF_MBAR + 0x06)	/* Intr Assignment */
+#define	MCFSIM_PLLCR		(MCF_MBAR + 0x08)	/* PLL Ctrl */
+#define	MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
+#define	MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
+#define	MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
+#define	MCFSIM_AVR		(MCF_MBAR + 0x4b)	/* Autovector Ctrl */
+#define	MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
+#define	MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
+#define	MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
+#define	MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
+#define	MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
+#define	MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
+#define	MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
+#define	MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
+#define	MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
+#define	MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
+#define	MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
+#define	MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
+
+#define MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
+#define MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
+#define MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
+#define MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
+#define MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
+#define MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
+
+#define MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
+#define MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
+#define MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
+#define MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
+#define MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
+#define MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
+#define MCFSIM_CSAR4		(MCF_MBAR + 0xb0)	/* CS 4 Address reg */
+#define MCFSIM_CSMR4		(MCF_MBAR + 0xb4)	/* CS 4 Mask reg */
+#define MCFSIM_CSCR4		(MCF_MBAR + 0xba)	/* CS 4 Control reg */
+#define MCFSIM_CSAR5		(MCF_MBAR + 0xbc)	/* CS 5 Address reg */
+#define MCFSIM_CSMR5		(MCF_MBAR + 0xc0)	/* CS 5 Mask reg */
+#define MCFSIM_CSCR5		(MCF_MBAR + 0xc6)	/* CS 5 Control reg */
+#define MCFSIM_CSAR6		(MCF_MBAR + 0xc8)	/* CS 6 Address reg */
+#define MCFSIM_CSMR6		(MCF_MBAR + 0xcc)	/* CS 6 Mask reg */
+#define MCFSIM_CSCR6		(MCF_MBAR + 0xd2)	/* CS 6 Control reg */
+#define MCFSIM_CSAR7		(MCF_MBAR + 0xd4)	/* CS 7 Address reg */
+#define MCFSIM_CSMR7		(MCF_MBAR + 0xd8)	/* CS 7 Mask reg */
+#define MCFSIM_CSCR7		(MCF_MBAR + 0xde)	/* CS 7 Control reg */
 
 #define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
 #define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
@@ -102,9 +102,9 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PIN_MAX			16
-#define MCFGPIO_IRQ_MAX			-1
-#define MCFGPIO_IRQ_VECBASE		-1
+#define MCFGPIO_PIN_MAX		16
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
 
 /*
  *	Some symbol defines for the above...
@@ -130,9 +130,9 @@
 /*
  *       Defines for the IRQPAR Register
  */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
+#define IRQ5_LEVEL4		0x80
+#define IRQ3_LEVEL6		0x40
+#define IRQ1_LEVEL2		0x20
 
 /*
  *	Define system peripheral IRQ usage.
diff --git a/arch/m68k/include/asm/m54xxgpt.h b/arch/m68k/include/asm/m54xxgpt.h
index df75dd87ae7a..0b69cd1ed0ed 100644
--- a/arch/m68k/include/asm/m54xxgpt.h
+++ b/arch/m68k/include/asm/m54xxgpt.h
@@ -16,26 +16,26 @@
 *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_GPT_GMS0       0x000800
-#define MCF_GPT_GCIR0      0x000804
-#define MCF_GPT_GPWM0      0x000808
-#define MCF_GPT_GSR0       0x00080C
-#define MCF_GPT_GMS1       0x000810
-#define MCF_GPT_GCIR1      0x000814
-#define MCF_GPT_GPWM1      0x000818
-#define MCF_GPT_GSR1       0x00081C
-#define MCF_GPT_GMS2       0x000820
-#define MCF_GPT_GCIR2      0x000824
-#define MCF_GPT_GPWM2      0x000828
-#define MCF_GPT_GSR2       0x00082C
-#define MCF_GPT_GMS3       0x000830
-#define MCF_GPT_GCIR3      0x000834
-#define MCF_GPT_GPWM3      0x000838
-#define MCF_GPT_GSR3       0x00083C
-#define MCF_GPT_GMS(x)     (0x000800+((x)*0x010))
-#define MCF_GPT_GCIR(x)    (0x000804+((x)*0x010))
-#define MCF_GPT_GPWM(x)    (0x000808+((x)*0x010))
-#define MCF_GPT_GSR(x)     (0x00080C+((x)*0x010))
+#define MCF_GPT_GMS0       (MCF_MBAR + 0x000800)
+#define MCF_GPT_GCIR0      (MCF_MBAR + 0x000804)
+#define MCF_GPT_GPWM0      (MCF_MBAR + 0x000808)
+#define MCF_GPT_GSR0       (MCF_MBAR + 0x00080C)
+#define MCF_GPT_GMS1       (MCF_MBAR + 0x000810)
+#define MCF_GPT_GCIR1      (MCF_MBAR + 0x000814)
+#define MCF_GPT_GPWM1      (MCF_MBAR + 0x000818)
+#define MCF_GPT_GSR1       (MCF_MBAR + 0x00081C)
+#define MCF_GPT_GMS2       (MCF_MBAR + 0x000820)
+#define MCF_GPT_GCIR2      (MCF_MBAR + 0x000824)
+#define MCF_GPT_GPWM2      (MCF_MBAR + 0x000828)
+#define MCF_GPT_GSR2       (MCF_MBAR + 0x00082C)
+#define MCF_GPT_GMS3       (MCF_MBAR + 0x000830)
+#define MCF_GPT_GCIR3      (MCF_MBAR + 0x000834)
+#define MCF_GPT_GPWM3      (MCF_MBAR + 0x000838)
+#define MCF_GPT_GSR3       (MCF_MBAR + 0x00083C)
+#define MCF_GPT_GMS(x)     (MCF_MBAR + 0x000800 + ((x) * 0x010))
+#define MCF_GPT_GCIR(x)    (MCF_MBAR + 0x000804 + ((x) * 0x010))
+#define MCF_GPT_GPWM(x)    (MCF_MBAR + 0x000808 + ((x) * 0x010))
+#define MCF_GPT_GSR(x)     (MCF_MBAR + 0x00080C + ((x) * 0x010))
 
 /* Bit definitions and macros for MCF_GPT_GMS */
 #define MCF_GPT_GMS_TMS(x)         (((x)&0x00000007)<<0)
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index d3c5e0dbdadf..d3bd83887429 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -47,6 +47,12 @@
 #define MCF_IRQ_UART3		(MCFINT_VECBASE + 32)
 
 /*
+ *	Slice Timer support.
+ */
+#define MCFSLT_TIMER0		(MCF_MBAR + 0x900)	/* Base addr TIMER0 */
+#define MCFSLT_TIMER1		(MCF_MBAR + 0x910)	/* Base addr TIMER1 */
+
+/*
  *	Generic GPIO support
  */
 #define MCFGPIO_PIN_MAX		0	/* I am too lazy to count */
@@ -64,15 +70,25 @@
 #define	MCFEPORT_EPFR		(MCF_MBAR + 0xf0c)	/* Flags */
 
 /*
- *	Some PSC related definitions
+ *	Pin Assignment register definitions
  */
-#define MCF_PAR_PSC(x)		(0x000A4F-((x)&0x3))
+#define MCFGPIO_PAR_FBCTL	(MCF_MBAR + 0xA40)
+#define MCFGPIO_PAR_FBCS	(MCF_MBAR + 0xA42)
+#define MCFGPIO_PAR_DMA		(MCF_MBAR + 0xA43)
+#define MCFGPIO_PAR_FECI2CIRQ	(MCF_MBAR + 0xA44)
+#define MCFGPIO_PAR_PCIBG	(MCF_MBAR + 0xA48)	/* PCI bus grant */
+#define MCFGPIO_PAR_PCIBR	(MCF_MBAR + 0xA4A)	/* PCI */
+#define MCFGPIO_PAR_PSC0	(MCF_MBAR + 0xA4F)
+#define MCFGPIO_PAR_PSC1	(MCF_MBAR + 0xA4E)
+#define MCFGPIO_PAR_PSC2	(MCF_MBAR + 0xA4D)
+#define MCFGPIO_PAR_PSC3	(MCF_MBAR + 0xA4C)
+#define MCFGPIO_PAR_DSPI	(MCF_MBAR + 0xA50)
+#define MCFGPIO_PAR_TIMER	(MCF_MBAR + 0xA52)
+
 #define MCF_PAR_SDA		(0x0008)
 #define MCF_PAR_SCL		(0x0004)
 #define MCF_PAR_PSC_TXD		(0x04)
 #define MCF_PAR_PSC_RXD		(0x08)
-#define MCF_PAR_PSC_RTS(x)	(((x)&0x03)<<4)
-#define MCF_PAR_PSC_CTS(x)	(((x)&0x03)<<6)
 #define MCF_PAR_PSC_CTS_GPIO	(0x00)
 #define MCF_PAR_PSC_CTS_BCLK	(0x80)
 #define MCF_PAR_PSC_CTS_CTS	(0xC0)
@@ -81,7 +97,4 @@
 #define MCF_PAR_PSC_RTS_RTS	(0x30)
 #define MCF_PAR_PSC_CANRX	(0x40)
 
-#define MCF_PAR_PCIBG		(CONFIG_MBAR + 0xa48)	/* PCI bus grant */
-#define MCF_PAR_PCIBR		(CONFIG_MBAR + 0xa4a)	/* PCI */
-
 #endif	/* m54xxsim_h */
diff --git a/arch/m68k/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h
index eb7d39ef2855..4664180a3ab3 100644
--- a/arch/m68k/include/asm/m68360.h
+++ b/arch/m68k/include/asm/m68360.h
@@ -1,7 +1,7 @@
-#include "m68360_regs.h"
-#include "m68360_pram.h"
-#include "m68360_quicc.h"
-#include "m68360_enet.h"
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+#include <asm/m68360_quicc.h>
+#include <asm/m68360_enet.h>
 
 #ifdef CONFIG_M68360
 
diff --git a/arch/m68k/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h
index c36f4d059203..4d04037c78a2 100644
--- a/arch/m68k/include/asm/m68360_enet.h
+++ b/arch/m68k/include/asm/m68360_enet.h
@@ -10,7 +10,7 @@
 #ifndef __ETHER_H
 #define __ETHER_H
 
-#include "quicc_simple.h"
+#include <asm/quicc_simple.h>
 
 /*
  * transmit BD's
diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h
deleted file mode 100644
index 39a5c292eaee..000000000000
--- a/arch/m68k/include/asm/mac_mouse.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASM_MAC_MOUSE_H
-#define _ASM_MAC_MOUSE_H
-
-/*
- * linux/include/asm-m68k/mac_mouse.h
- * header file for Macintosh ADB mouse driver
- * 27-10-97 Michael Schmitz
- * copied from:
- * header file for Atari Mouse driver
- * by Robert de Vries (robert@and.nl) on 19Jul93
- */
-
-struct mouse_status {
-	char		buttons;
-	short		dx;
-	short		dy;
-	int		ready;
-	int		active;
-	wait_queue_head_t wait;
-	struct fasync_struct *fasyncptr;
-};
-
-#endif
diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h
deleted file mode 100644
index 319899c47a2c..000000000000
--- a/arch/m68k/include/asm/mcfmbus.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/****************************************************************************/
-
-/*
- *      mcfmbus.h -- Coldfire MBUS support defines.
- *
- *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE		0x280
-#define MCFMBUS_IRQ_VECTOR	0x19
-#define MCFMBUS_IRQ		0x1
-#define MCFMBUS_CLK		0x3f
-#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
-#define MCFMBUS_ADDRESS		0x01
-
-
-/*
-*	Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR	0x00
-#define MCFMBUS_MFDR	0x04
-#define MCFMBUS_MBCR	0x08
-#define MCFMBUS_MBSR	0x0C
-#define MCFMBUS_MBDR	0x10
-
-
-#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
-
-/*
-*	Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
-#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
-#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
-#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
-
-/*
-*	Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
-#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
-#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
-#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
-#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
-#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
-#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
-
-/*
-*	Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK		1
-#define MBUSIOCGCLOCK		2
-#define MBUSIOCSADDR			3
-#define MBUSIOCGADDR			4
-#define MBUSIOCSSLADDR			5
-#define MBUSIOCGSLADDR			6
-#define MBUSIOCSSUBADDR			7
-#define MBUSIOCGSUBADDR			8
-
-#endif
diff --git a/arch/m68k/include/asm/mcfslt.h b/arch/m68k/include/asm/mcfslt.h
index d0d0ecba5333..c2314b6f8caa 100644
--- a/arch/m68k/include/asm/mcfslt.h
+++ b/arch/m68k/include/asm/mcfslt.h
@@ -13,13 +13,6 @@
 /****************************************************************************/
 
 /*
- *	Get address specific defines for the 547x.
- */
-#define MCFSLT_TIMER0		0x900	/* Base address of TIMER0 */
-#define MCFSLT_TIMER1		0x910	/* Base address of TIMER1 */
-
-
-/*
  *	Define the SLT timer register set addresses.
  */
 #define MCFSLT_STCNT		0x00	/* Terminal count */
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
deleted file mode 100644
index 8eebf89f5ab1..000000000000
--- a/arch/m68k/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/arch/m68k/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 4dec2d9fb994..2a7a7667d807 100644
--- a/arch/m68k/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
@@ -21,6 +21,7 @@
 #ifdef CONFIG_COLDFIRE
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
+#include <asm/io.h>
 #endif
 
 /*---------------------------------------------------------------------------*/
@@ -86,16 +87,12 @@ static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
  */
 static __inline__ unsigned int mcf_getppdata(void)
 {
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	return((unsigned int) *pp);
+	return readw(MCFSIM_PBDAT);
 }
 
 static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
 {
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	*pp = (*pp & ~mask) | bits;
+	write((readw(MCFSIM_PBDAT) & ~mask) | bits, MCFSIM_PBDAT);
 }
 #endif
 
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index 98baa82a8615..7c360dac00b7 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -43,9 +43,9 @@ extern unsigned long _ramend;
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_MMU
-#include "page_mm.h"
+#include <asm/page_mm.h>
 #else
-#include "page_no.h"
+#include <asm/page_no.h>
 #endif
 
 #include <asm-generic/getorder.h>
diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h
deleted file mode 100644
index 0859d048faf5..000000000000
--- a/arch/m68k/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_PERCPU_H
-#define __ASM_M68K_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif	/* __ASM_M68K_PERCPU_H */
diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h
index ee6759eb445a..a3d733b524d2 100644
--- a/arch/m68k/include/asm/pgtable.h
+++ b/arch/m68k/include/asm/pgtable.h
@@ -1,5 +1,5 @@
 #ifdef __uClinux__
-#include "pgtable_no.h"
+#include <asm/pgtable_no.h>
 #else
-#include "pgtable_mm.h"
+#include <asm/pgtable_mm.h>
 #endif
diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h
index 3907a09d4fca..fc5b36278d04 100644
--- a/arch/m68k/include/asm/q40_master.h
+++ b/arch/m68k/include/asm/q40_master.h
@@ -60,7 +60,7 @@
 #define Q40_RTC_WRITE  128
 
 /* define some Q40 specific ints */
-#include "q40ints.h"
+#include <asm/q40ints.h>
 
 /* misc defs */
 #define DAC_LEFT  ((unsigned char *)0xff008000)
diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h
deleted file mode 100644
index e7d35019f337..000000000000
--- a/arch/m68k/include/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_RESOURCE_H
-#define _M68K_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _M68K_RESOURCE_H */
diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h
deleted file mode 100644
index bfe3ba147f2e..000000000000
--- a/arch/m68k/include/asm/sbus.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * some sbus structures and macros to make usage of sbus drivers possible
- */
-
-#ifndef __M68K_SBUS_H
-#define __M68K_SBUS_H
-
-struct sbus_dev {
-	struct {
-		unsigned int which_io;
-		unsigned int phys_addr;
-	} reg_addrs[1];
-};
-
-/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
-/* No SBUS on the Sun3, kludge -- sam */
-
-static inline void _sbus_writeb(unsigned char val, unsigned long addr)
-{
-	*(volatile unsigned char *)addr = val;
-}
-
-static inline unsigned char _sbus_readb(unsigned long addr)
-{
-	return *(volatile unsigned char *)addr;
-}
-
-static inline void _sbus_writel(unsigned long val, unsigned long addr)
-{
-	*(volatile unsigned long *)addr = val;
-
-}
-
-extern inline unsigned long _sbus_readl(unsigned long addr)
-{
-	return *(volatile unsigned long *)addr;
-}
-
-
-#define sbus_readb(a) _sbus_readb((unsigned long)a)
-#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
-#define sbus_readl(a) _sbus_readl((unsigned long)a)
-#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
-
-#endif
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
deleted file mode 100644
index 312505452a1e..000000000000
--- a/arch/m68k/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SCATTERLIST_H
-#define _M68K_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h
deleted file mode 100644
index 5277e52715ec..000000000000
--- a/arch/m68k/include/asm/sections.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_M68K_SECTIONS_H
-#define _ASM_M68K_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char _sbss[], _ebss[];
-
-#endif /* _ASM_M68K_SECTIONS_H */
diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h
deleted file mode 100644
index fa56ec84a126..000000000000
--- a/arch/m68k/include/asm/shm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _M68K_SHM_H
-#define _M68K_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
-   currently out in swap space (see also mm/swap.c):
-   bits 0-1 (PAGE_PRESENT) is  = 0
-   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
-   bits 31..9 are used like this:
-   bits 15..9 (SHM_ID) the id of the shared memory segment
-   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
-                    (actually only bits 25..16 get used since SHMMAX is so low)
-   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
-   others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT	9
-#else
-#define SHM_ID_SHIFT	7
-#endif
-#define _SHM_ID_BITS	7
-#define SHM_ID_MASK	((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT	(SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS	15
-#define SHM_IDX_MASK	((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _M68K_SHM_H */
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
deleted file mode 100644
index 851d3d784b53..000000000000
--- a/arch/m68k/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SIGINFO_H
-#define _M68K_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h
deleted file mode 100644
index 08d93f14e061..000000000000
--- a/arch/m68k/include/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_STATFS_H
-#define _M68K_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _M68K_STATFS_H */
diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h
deleted file mode 100644
index ca173e9f26ff..000000000000
--- a/arch/m68k/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h
deleted file mode 100644
index 89705adcbd52..000000000000
--- a/arch/m68k/include/asm/types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68K_TYPES_H
-#define _M68K_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_TYPES_H */
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
index 38f92dbb9a45..639c731568b0 100644
--- a/arch/m68k/include/asm/uaccess.h
+++ b/arch/m68k/include/asm/uaccess.h
@@ -1,5 +1,5 @@
 #ifdef __uClinux__
-#include "uaccess_no.h"
+#include <asm/uaccess_no.h>
 #else
-#include "uaccess_mm.h"
+#include <asm/uaccess_mm.h>
 #endif
diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h
index f4043ae63db1..2b3ca0bf7a0d 100644
--- a/arch/m68k/include/asm/unaligned.h
+++ b/arch/m68k/include/asm/unaligned.h
@@ -2,7 +2,7 @@
 #define _ASM_M68K_UNALIGNED_H
 
 
-#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000)
+#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
 #include <linux/unaligned/be_struct.h>
 #include <linux/unaligned/le_byteshift.h>
 #include <linux/unaligned/generic.h>
@@ -12,7 +12,7 @@
 
 #else
 /*
- * The m68k can do unaligned accesses itself. 
+ * The m68k can do unaligned accesses itself.
  */
 #include <linux/unaligned/access_ok.h>
 #include <linux/unaligned/generic.h>
diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h
deleted file mode 100644
index c82eb12a5b18..000000000000
--- a/arch/m68k/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/m68k/kernel/pcibios.c b/arch/m68k/kernel/pcibios.c
index b2988aa1840b..73fa0b56a06c 100644
--- a/arch/m68k/kernel/pcibios.c
+++ b/arch/m68k/kernel/pcibios.c
@@ -87,11 +87,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return 0;
 }
 
-void pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index c488e3cfab53..ac2892e49c7c 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -25,6 +25,7 @@
 #include <linux/reboot.h>
 #include <linux/init_task.h>
 #include <linux/mqueue.h>
+#include <linux/rcupdate.h>
 
 #include <asm/uaccess.h>
 #include <asm/traps.h>
@@ -75,8 +76,10 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched())
 			idle();
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 	}
 }
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 7dc186b7a85f..71fb29938dba 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
-	pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		 "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		 (int) &_sdata, (int) &_edata,
-		 (int) &_sbss, (int) &_ebss);
-	pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
-		 (int) &_ebss, (int) memory_start,
-		 (int) memory_start, (int) memory_end);
+	pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
+		 _stext, _etext, _sdata, _edata, __bss_start, __bss_stop);
+	pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
+		 __bss_stop, memory_start, memory_start, memory_end);
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index 8623f8dc16f8..9a5932ec3689 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
 			goto bad_access;
 		}
 
-		mem_value = *mem;
+		/*
+		 * No need to check for EFAULT; we know that the page is
+		 * present and writable.
+		 */
+		__get_user(mem_value, mem);
 		if (mem_value == oldval)
-			*mem = newval;
+			__put_user(newval, mem);
 
 		pte_unmap_unlock(pte, ptl);
 		up_read(&mm->mmap_sem);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 707f0573ec6b..5d0bcaad2e55 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -100,10 +100,7 @@ static int __init rtc_init(void)
 		return -ENODEV;
 
 	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
+	return PTR_RET(pdev);
 }
 
 module_init(rtc_init);
diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds
index 40e02d9c38b4..06a763f49fd3 100644
--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -78,9 +78,7 @@ SECTIONS {
 		__init_end = .;
 	}
 
-	_sbss = .;
 	BSS_SECTION(0, 0, 0)
-	_ebss = .;
 
 	_end = .;
 
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 63407c836826..d0993594f558 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -31,9 +31,7 @@ SECTIONS
 
   RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
 
-  _sbss = .;
   BSS_SECTION(0, 0, 0)
-  _ebss = .;
 
   _edata = .;			/* End of data section */
 
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index ad0f46d64c0b..8080469ee6c1 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -44,9 +44,7 @@ __init_begin = .;
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 
-  _sbss = .;
   BSS_SECTION(0, 0, 0)
-  _ebss = .;
 
   _end = . ;
 
diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c
index 79e928a525d0..ee5f0b1b5c5d 100644
--- a/arch/m68k/lib/muldi3.c
+++ b/arch/m68k/lib/muldi3.c
@@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING.  If not, write to
 the Free Software Foundation, 59 Temple Place - Suite 330,
 Boston, MA 02111-1307, USA.  */
 
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+#ifdef CONFIG_CPU_HAS_NO_MULDIV64
 
 #define SI_TYPE_SIZE 32
 #define __BITS4 (SI_TYPE_SIZE / 4)
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c
index f77f258dce3a..282f9de68966 100644
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init_mm.c
@@ -104,7 +104,7 @@ void __init print_memmap(void)
 		MLK_ROUNDUP(__init_begin, __init_end),
 		MLK_ROUNDUP(_stext, _etext),
 		MLK_ROUNDUP(_sdata, _edata),
-		MLK_ROUNDUP(_sbss, _ebss));
+		MLK_ROUNDUP(__bss_start, __bss_stop));
 }
 
 void __init mem_init(void)
diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c
index 345ec0d83e3d..688e3664aea0 100644
--- a/arch/m68k/mm/init_no.c
+++ b/arch/m68k/mm/init_no.c
@@ -91,7 +91,7 @@ void __init mem_init(void)
 	totalram_pages = free_all_bootmem();
 
 	codek = (_etext - _stext) >> 10;
-	datak = (_ebss - _sdata) >> 10;
+	datak = (__bss_stop - _sdata) >> 10;
 	initk = (__init_begin - __init_end) >> 10;
 
 	tmp = nr_free_pages() << PAGE_SHIFT;
diff --git a/arch/m68k/platform/68328/head-de2.S b/arch/m68k/platform/68328/head-de2.S
index f632fdcb93e9..537d3245b539 100644
--- a/arch/m68k/platform/68328/head-de2.S
+++ b/arch/m68k/platform/68328/head-de2.S
@@ -60,8 +60,8 @@ _start:
  *	Move ROM filesystem above bss :-)
  */
 
-	moveal	#_sbss, %a0			/* romfs at the start of bss */
-	moveal	#_ebss, %a1			/* Set up destination  */
+	moveal	#__bss_start, %a0		/* romfs at the start of bss */
+	moveal	#__bss_stop, %a1		/* Set up destination  */
 	movel	%a0, %a2			/* Copy of bss start */
 
 	movel	8(%a0), %d1			/* Get size of ROMFS */
@@ -84,8 +84,8 @@ _start:
  * Initialize BSS segment to 0
  */
 
-	lea	_sbss, %a0
-	lea	_ebss, %a1
+	lea	__bss_start, %a0
+	lea	__bss_stop, %a1
 
 	/* Copy 0 to %a0 until %a0 == %a1 */
 2:	cmpal	%a0, %a1
diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S
index 2ebfd6420818..45a9dad29e3d 100644
--- a/arch/m68k/platform/68328/head-pilot.S
+++ b/arch/m68k/platform/68328/head-pilot.S
@@ -110,7 +110,7 @@ L0:
 	movel	#CONFIG_VECTORBASE, %d7
 	addl	#16, %d7
 	moveal	%d7, %a0
-	moveal	#_ebss, %a1
+	moveal	#__bss_stop, %a1
 	lea	%a1@(512), %a2
 
 	DBG_PUTC('C')
@@ -138,8 +138,8 @@ LD1:
 
 	DBG_PUTC('E')
 
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
+	moveal	#__bss_start, %a0
+	moveal	#__bss_stop, %a1
 
 	/* Copy 0 to %a0 until %a0 == %a1 */
 L1:
@@ -150,7 +150,7 @@ L1:
 	DBG_PUTC('F')
 
 	/* Copy command line from end of bss to command line */
-	moveal	#_ebss, %a0
+	moveal	#__bss_stop, %a0
 	moveal	#command_line, %a1
 	lea	%a1@(512), %a2
 
@@ -165,7 +165,7 @@ L3:
 
 	movel	#_sdata, %d0	
 	movel	%d0, _rambase	
-	movel	#_ebss,	%d0
+	movel	#__bss_stop, %d0
 	movel	%d0, _ramstart
 
 	movel	%a4, %d0
diff --git a/arch/m68k/platform/68328/head-ram.S b/arch/m68k/platform/68328/head-ram.S
index 7f1aeeacb219..5189ef926098 100644
--- a/arch/m68k/platform/68328/head-ram.S
+++ b/arch/m68k/platform/68328/head-ram.S
@@ -76,8 +76,8 @@ pclp3:
 	beq	pclp3
 #endif /* DEBUG */
 	moveal	#0x007ffff0, %ssp
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
+	moveal	#__bss_start, %a0
+	moveal	#__bss_stop, %a1
 
 	/* Copy 0 to %a0 until %a0 >= %a1 */
 L1:
diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S
index a5ff96d0295f..3dff98ba2e97 100644
--- a/arch/m68k/platform/68328/head-rom.S
+++ b/arch/m68k/platform/68328/head-rom.S
@@ -59,8 +59,8 @@ _stext:	movew	#0x2700,%sr
 	cmpal	%a1, %a2
 	bhi	1b
 
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
+	moveal	#__bss_start, %a0
+	moveal	#__bss_stop, %a1
 	/* Copy 0 to %a0 until %a0 == %a1 */
 	
 1:
@@ -70,7 +70,7 @@ _stext:	movew	#0x2700,%sr
 
         movel   #_sdata, %d0    
         movel   %d0, _rambase        
-        movel   #_ebss, %d0
+        movel   #__bss_stop, %d0
         movel   %d0, _ramstart
 	movel	#RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0
 	movel	%d0, _ramend
diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S
index 8eb94fb6b971..acd213170d80 100644
--- a/arch/m68k/platform/68360/head-ram.S
+++ b/arch/m68k/platform/68360/head-ram.S
@@ -219,8 +219,8 @@ LD1:
 	cmp.l	#_edata, %a1
 	blt     LD1
 
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
+	moveal	#__bss_start, %a0
+	moveal	#__bss_stop, %a1
 
 	/* Copy 0 to %a0 until %a0 == %a1 */
 L1:
@@ -234,7 +234,7 @@ load_quicc:
 store_ram_size:
 	/* Set ram size information */
 	move.l	#_sdata, _rambase
-	move.l	#_ebss, _ramstart
+	move.l	#__bss_stop, _ramstart
 	move.l	#RAMEND, %d0
 	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
 	move.l	%d0, _ramend			/* Different from RAMEND.*/
diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S
index 97510e55b802..dfc756d99886 100644
--- a/arch/m68k/platform/68360/head-rom.S
+++ b/arch/m68k/platform/68360/head-rom.S
@@ -13,7 +13,7 @@
  */
 
 .global _stext
-.global _sbss
+.global __bss_start
 .global _start
 
 .global _rambase
@@ -229,8 +229,8 @@ LD1:
 	cmp.l	#_edata, %a1
 	blt	LD1
 
-	moveal	#_sbss, %a0
-	moveal	#_ebss, %a1
+	moveal	#__bss_start, %a0
+	moveal	#__bss_stop, %a1
 
 	/* Copy 0 to %a0 until %a0 == %a1 */
 L1:
@@ -244,7 +244,7 @@ load_quicc:
 store_ram_size:
 	/* Set ram size information */
 	move.l	#_sdata, _rambase
-	move.l	#_ebss, _ramstart
+	move.l	#__bss_stop, _ramstart
 	move.l	#RAMEND, %d0
 	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
 	move.l	%d0, _ramend			/* Different from RAMEND.*/
diff --git a/arch/m68k/platform/68VZ328/Makefile b/arch/m68k/platform/68VZ328/Makefile
index a49d75e65489..816674164682 100644
--- a/arch/m68k/platform/68VZ328/Makefile
+++ b/arch/m68k/platform/68VZ328/Makefile
@@ -1,11 +1,5 @@
 #
-# Makefile for arch/m68knommu/platform/68VZ328.
+# Makefile for arch/m68k/platform/68VZ328.
 #
 
 obj-y		:= config.o
-extra-$(DRAGEN2):= screen.h
-
-$(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
-	perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
-
-clean-files := $(obj)/screen.h
diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c
index 75f9ee967ea7..9cd13b4ce42b 100644
--- a/arch/m68k/platform/coldfire/clk.c
+++ b/arch/m68k/platform/coldfire/clk.c
@@ -146,9 +146,3 @@ struct clk_ops clk_ops1 = {
 };
 #endif /* MCFPM_PPMCR1 */
 #endif /* MCFPM_PPMCR0 */
-
-struct clk *devm_clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-EXPORT_SYMBOL(devm_clk_get);
diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
index 81f0fb5e51cf..71ea4c02795d 100644
--- a/arch/m68k/platform/coldfire/device.c
+++ b/arch/m68k/platform/coldfire/device.c
@@ -347,12 +347,12 @@ static void __init mcf_uart_set_irq(void)
 {
 #ifdef MCFUART_UIVR
 	/* UART0 interrupt setup */
-	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCFSIM_UART1ICR);
 	writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
 	mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
 
 	/* UART1 interrupt setup */
-	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCFSIM_UART2ICR);
 	writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
 	mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
 #endif
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index 4e0c9eb3bd1f..fa31be297b85 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -60,7 +60,7 @@
 
 #elif defined(CONFIG_M5272)
 .macro GET_MEM_SIZE
-	movel	MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
+	movel	MCFSIM_CSOR7,%d0	/* get SDRAM address mask */
 	andil	#0xfffff000,%d0		/* mask out chip select options */
 	negl	%d0			/* negate bits */
 .endm
@@ -230,8 +230,8 @@ _vstart:
 	/*
 	 *	Move ROM filesystem above bss :-)
 	 */
-	lea	_sbss,%a0			/* get start of bss */
-	lea	_ebss,%a1			/* set up destination  */
+	lea	__bss_start,%a0			/* get start of bss */
+	lea	__bss_stop,%a1			/* set up destination  */
 	movel	%a0,%a2				/* copy of bss start */
 
 	movel	8(%a0),%d0			/* get size of ROMFS */
@@ -249,7 +249,7 @@ _copy_romfs:
 	bne	_copy_romfs
 
 #else /* CONFIG_ROMFS_FS */
-	lea	_ebss,%a1
+	lea	__bss_stop,%a1
 	movel	%a1,_ramstart
 #endif /* CONFIG_ROMFS_FS */
 
@@ -257,8 +257,8 @@ _copy_romfs:
 	/*
 	 *	Zero out the bss region.
 	 */
-	lea	_sbss,%a0			/* get start of bss */
-	lea	_ebss,%a1			/* get end of bss */
+	lea	__bss_start,%a0			/* get start of bss */
+	lea	__bss_stop,%a1			/* get end of bss */
 	clrl	%d0				/* set value */
 _clear_bss:
 	movel	%d0,(%a0)+			/* clear each word */
diff --git a/arch/m68k/platform/coldfire/intc-5249.c b/arch/m68k/platform/coldfire/intc-5249.c
index f343bf7bf5b0..0864b836699a 100644
--- a/arch/m68k/platform/coldfire/intc-5249.c
+++ b/arch/m68k/platform/coldfire/intc-5249.c
@@ -20,22 +20,22 @@
 static void intc2_irq_gpio_mask(struct irq_data *d)
 {
 	u32 imr;
-	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	imr = readl(MCFSIM2_GPIOINTENABLE);
 	imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
-	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	writel(imr, MCFSIM2_GPIOINTENABLE);
 }
 
 static void intc2_irq_gpio_unmask(struct irq_data *d)
 {
 	u32 imr;
-	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	imr = readl(MCFSIM2_GPIOINTENABLE);
 	imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
-	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	writel(imr, MCFSIM2_GPIOINTENABLE);
 }
 
 static void intc2_irq_gpio_ack(struct irq_data *d)
 {
-	writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
+	writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCFSIM2_GPIOINTCLEAR);
 }
 
 static struct irq_chip intc2_irq_gpio_chip = {
diff --git a/arch/m68k/platform/coldfire/intc-5272.c b/arch/m68k/platform/coldfire/intc-5272.c
index 7160e618b0a9..d7b695629a7e 100644
--- a/arch/m68k/platform/coldfire/intc-5272.c
+++ b/arch/m68k/platform/coldfire/intc-5272.c
@@ -86,7 +86,7 @@ static void intc_irq_mask(struct irq_data *d)
 		u32 v;
 		irq -= MCFINT_VECBASE;
 		v = 0x8 << intc_irqmap[irq].index;
-		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+		writel(v, intc_irqmap[irq].icr);
 	}
 }
 
@@ -98,7 +98,7 @@ static void intc_irq_unmask(struct irq_data *d)
 		u32 v;
 		irq -= MCFINT_VECBASE;
 		v = 0xd << intc_irqmap[irq].index;
-		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+		writel(v, intc_irqmap[irq].icr);
 	}
 }
 
@@ -111,10 +111,10 @@ static void intc_irq_ack(struct irq_data *d)
 		irq -= MCFINT_VECBASE;
 		if (intc_irqmap[irq].ack) {
 			u32 v;
-			v = readl(MCF_MBAR + intc_irqmap[irq].icr);
+			v = readl(intc_irqmap[irq].icr);
 			v &= (0x7 << intc_irqmap[irq].index);
 			v |= (0x8 << intc_irqmap[irq].index);
-			writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+			writel(v, intc_irqmap[irq].icr);
 		}
 	}
 }
@@ -127,12 +127,12 @@ static int intc_irq_set_type(struct irq_data *d, unsigned int type)
 		irq -= MCFINT_VECBASE;
 		if (intc_irqmap[irq].ack) {
 			u32 v;
-			v = readl(MCF_MBAR + MCFSIM_PITR);
+			v = readl(MCFSIM_PITR);
 			if (type == IRQ_TYPE_EDGE_FALLING)
 				v &= ~(0x1 << (32 - irq));
 			else
 				v |= (0x1 << (32 - irq));
-			writel(v, MCF_MBAR + MCFSIM_PITR);
+			writel(v, MCFSIM_PITR);
 		}
 	}
 	return 0;
@@ -163,10 +163,10 @@ void __init init_IRQ(void)
 	int irq, edge;
 
 	/* Mask all interrupt sources */
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR1);
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR2);
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR3);
-	writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
+	writel(0x88888888, MCFSIM_ICR1);
+	writel(0x88888888, MCFSIM_ICR2);
+	writel(0x88888888, MCFSIM_ICR3);
+	writel(0x88888888, MCFSIM_ICR4);
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
 		irq_set_chip(irq, &intc_irq_chip);
diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c
index 5c0c150b4067..cce257420388 100644
--- a/arch/m68k/platform/coldfire/intc.c
+++ b/arch/m68k/platform/coldfire/intc.c
@@ -45,23 +45,23 @@ unsigned char mcf_irq2imr[NR_IRQS];
 void mcf_setimr(int index)
 {
 	u16 imr;
-	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
-	__raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readw(MCFSIM_IMR);
+	__raw_writew(imr | (0x1 << index), MCFSIM_IMR);
 }
 
 void mcf_clrimr(int index)
 {
 	u16 imr;
-	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
-	__raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readw(MCFSIM_IMR);
+	__raw_writew(imr & ~(0x1 << index), MCFSIM_IMR);
 }
 
 void mcf_maskimr(unsigned int mask)
 {
 	u16 imr;
-	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readw(MCFSIM_IMR);
 	imr |= mask;
-	__raw_writew(imr, MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr, MCFSIM_IMR);
 }
 
 #else
@@ -69,23 +69,23 @@ void mcf_maskimr(unsigned int mask)
 void mcf_setimr(int index)
 {
 	u32 imr;
-	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
-	__raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readl(MCFSIM_IMR);
+	__raw_writel(imr | (0x1 << index), MCFSIM_IMR);
 }
 
 void mcf_clrimr(int index)
 {
 	u32 imr;
-	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
-	__raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readl(MCFSIM_IMR);
+	__raw_writel(imr & ~(0x1 << index), MCFSIM_IMR);
 }
 
 void mcf_maskimr(unsigned int mask)
 {
 	u32 imr;
-	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readl(MCFSIM_IMR);
 	imr |= mask;
-	__raw_writel(imr, MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr, MCFSIM_IMR);
 }
 
 #endif
@@ -104,9 +104,9 @@ void mcf_autovector(int irq)
 #ifdef MCFSIM_AVR
 	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
 		u8 avec;
-		avec = __raw_readb(MCF_MBAR + MCFSIM_AVR);
+		avec = __raw_readb(MCFSIM_AVR);
 		avec |= (0x1 << (irq - EIRQ1 + 1));
-		__raw_writeb(avec, MCF_MBAR + MCFSIM_AVR);
+		__raw_writeb(avec, MCFSIM_AVR);
 	}
 #endif
 }
diff --git a/arch/m68k/platform/coldfire/m523x.c b/arch/m68k/platform/coldfire/m523x.c
index d47dfd8f50a2..ff37fe9553ea 100644
--- a/arch/m68k/platform/coldfire/m523x.c
+++ b/arch/m68k/platform/coldfire/m523x.c
@@ -42,14 +42,8 @@ static void __init m523x_qspi_init(void)
 
 static void __init m523x_fec_init(void)
 {
-	u16 par;
-	u8 v;
-
 	/* Set multi-function pins to ethernet use */
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100078);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+	writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C);
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m5249.c b/arch/m68k/platform/coldfire/m5249.c
index 300e729a58d0..23b19cb7ab50 100644
--- a/arch/m68k/platform/coldfire/m5249.c
+++ b/arch/m68k/platform/coldfire/m5249.c
@@ -57,7 +57,7 @@ static void __init m5249_qspi_init(void)
 {
 	/* QSPI irq setup */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
-	       MCF_MBAR + MCFSIM_QSPIICR);
+	       MCFSIM_QSPIICR);
 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
 }
 
@@ -72,11 +72,11 @@ static void __init m5249_smc91x_init(void)
 	u32  gpio;
 
 	/* Set the GPIO line as interrupt source for smc91x device */
-	gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-	writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	gpio = readl(MCFSIM2_GPIOINTENABLE);
+	writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
 
-	gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
-	writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+	gpio = readl(MCFSIM2_INTLEVEL5);
+	writel(gpio | 0x04000000, MCFSIM2_INTLEVEL5);
 }
 
 #endif /* CONFIG_M5249C3 */
diff --git a/arch/m68k/platform/coldfire/m525x.c b/arch/m68k/platform/coldfire/m525x.c
index 8ce905f9b84f..fce8f8a45bf0 100644
--- a/arch/m68k/platform/coldfire/m525x.c
+++ b/arch/m68k/platform/coldfire/m525x.c
@@ -30,7 +30,7 @@ static void __init m525x_qspi_init(void)
 
 	/* QSPI irq setup */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
-	       MCF_MBAR + MCFSIM_QSPIICR);
+	       MCFSIM_QSPIICR);
 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 }
@@ -42,7 +42,7 @@ static void __init m525x_i2c_init(void)
 
 	/* first I2C controller uses regular irq setup */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
-			MCF_MBAR + MCFSIM_I2CICR);
+		MCFSIM_I2CICR);
 	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
 
 	/* second I2C controller is completely different */
diff --git a/arch/m68k/platform/coldfire/m5272.c b/arch/m68k/platform/coldfire/m5272.c
index e68bc7a148eb..45b246d052ef 100644
--- a/arch/m68k/platform/coldfire/m5272.c
+++ b/arch/m68k/platform/coldfire/m5272.c
@@ -35,13 +35,13 @@ static void __init m5272_uarts_init(void)
 	u32 v;
 
 	/* Enable the output lines for the serial ports */
-	v = readl(MCF_MBAR + MCFSIM_PBCNT);
+	v = readl(MCFSIM_PBCNT);
 	v = (v & ~0x000000ff) | 0x00000055;
-	writel(v, MCF_MBAR + MCFSIM_PBCNT);
+	writel(v, MCFSIM_PBCNT);
 
-	v = readl(MCF_MBAR + MCFSIM_PDCNT);
+	v = readl(MCFSIM_PDCNT);
 	v = (v & ~0x000003fc) | 0x000002a8;
-	writel(v, MCF_MBAR + MCFSIM_PDCNT);
+	writel(v, MCFSIM_PDCNT);
 }
 
 /***************************************************************************/
@@ -50,9 +50,9 @@ static void m5272_cpu_reset(void)
 {
 	local_irq_disable();
 	/* Set watchdog to reset, and enabled */
-	__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
-	__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
-	__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
+	__raw_writew(0, MCFSIM_WIRR);
+	__raw_writew(1, MCFSIM_WRRR);
+	__raw_writew(0, MCFSIM_WCR);
 	for (;;)
 		/* wait for watchdog to timeout */;
 }
@@ -62,11 +62,8 @@ static void m5272_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 #if defined (CONFIG_MOD5272)
-	volatile unsigned char	*pivrp;
-
 	/* Set base of device vectors to be 64 */
-	pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
-	*pivrp = 0x40;
+	writeb(0x40, MCFSIM_PIVR);
 #endif
 
 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
diff --git a/arch/m68k/platform/coldfire/m527x.c b/arch/m68k/platform/coldfire/m527x.c
index b3cb378c5e94..1431ba03c602 100644
--- a/arch/m68k/platform/coldfire/m527x.c
+++ b/arch/m68k/platform/coldfire/m527x.c
@@ -53,9 +53,9 @@ static void __init m527x_uarts_init(void)
 	/*
 	 * External Pin Mask Setting & Enable External Pin for Interface
 	 */
-	sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+	sepmask = readw(MCFGPIO_PAR_UART);
 	sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
-	writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+	writew(sepmask, MCFGPIO_PAR_UART);
 }
 
 /***************************************************************************/
@@ -67,19 +67,19 @@ static void __init m527x_fec_init(void)
 
 	/* Set multi-function pins to ethernet mode for fec0 */
 #if defined(CONFIG_M5271)
-	v = readb(MCF_IPSBAR + 0x100047);
-	writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+	v = readb(MCFGPIO_PAR_FECI2C);
+	writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
 #else
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100078);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+	par = readw(MCFGPIO_PAR_FECI2C);
+	writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
+	v = readb(MCFGPIO_PAR_FEC0HL);
+	writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
 
 	/* Set multi-function pins to ethernet mode for fec1 */
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100079);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
+	par = readw(MCFGPIO_PAR_FECI2C);
+	writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
+	v = readb(MCFGPIO_PAR_FEC1HL);
+	writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
 #endif
 }
 
diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c
index f1319e5d2546..f9f7e6a13d04 100644
--- a/arch/m68k/platform/coldfire/m528x.c
+++ b/arch/m68k/platform/coldfire/m528x.c
@@ -53,9 +53,9 @@ static void __init m528x_fec_init(void)
 	u16 v16;
 
 	/* Set multi-function pins to ethernet mode for fec0 */
-	v16 = readw(MCF_IPSBAR + 0x100056);
-	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
-	writeb(0xc0, MCF_IPSBAR + 0x100058);
+	v16 = readw(MCFGPIO_PASPAR);
+	writew(v16 | 0xf00, MCFGPIO_PASPAR);
+	writeb(0xc0, MCFGPIO_PEHLPAR);
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c
index 4819a44991ed..7951d1d43357 100644
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m532x.c
@@ -172,7 +172,7 @@ static void __init m532x_clk_init(void)
 static void __init m532x_qspi_init(void)
 {
 	/* setup QSPS pins for QSPI with gpio CS control */
-	writew(0x01f0, MCF_GPIO_PAR_QSPI);
+	writew(0x01f0, MCFGPIO_PAR_QSPI);
 }
 
 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
@@ -182,18 +182,24 @@ static void __init m532x_qspi_init(void)
 static void __init m532x_uarts_init(void)
 {
 	/* UART GPIO initialization */
-	MCF_GPIO_PAR_UART |= 0x0FFF;
+	writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
 }
 
 /***************************************************************************/
 
 static void __init m532x_fec_init(void)
 {
+	u8 v;
+
 	/* Set multi-function pins to ethernet mode for fec0 */
-	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
-		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
-	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
-		MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+	v = readb(MCFGPIO_PAR_FECI2C);
+	v |= MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO;
+	writeb(v, MCFGPIO_PAR_FECI2C);
+
+	v = readb(MCFGPIO_PAR_FEC);
+	v = MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC;
+	writeb(v, MCFGPIO_PAR_FEC);
 }
 
 /***************************************************************************/
@@ -298,7 +304,7 @@ asmlinkage void __init sysinit(void)
 void wtm_init(void)
 {
 	/* Disable watchdog timer */
-	MCF_WTM_WCR = 0;
+	writew(0, MCF_WTM_WCR);
 }
 
 #define MCF_SCM_BCR_GBW		(0x00000100)
@@ -307,53 +313,53 @@ void wtm_init(void)
 void scm_init(void)
 {
 	/* All masters are trusted */
-	MCF_SCM_MPR = 0x77777777;
+	writel(0x77777777, MCF_SCM_MPR);
     
 	/* Allow supervisor/user, read/write, and trusted/untrusted
 	   access to all slaves */
-	MCF_SCM_PACRA = 0;
-	MCF_SCM_PACRB = 0;
-	MCF_SCM_PACRC = 0;
-	MCF_SCM_PACRD = 0;
-	MCF_SCM_PACRE = 0;
-	MCF_SCM_PACRF = 0;
+	writel(0, MCF_SCM_PACRA);
+	writel(0, MCF_SCM_PACRB);
+	writel(0, MCF_SCM_PACRC);
+	writel(0, MCF_SCM_PACRD);
+	writel(0, MCF_SCM_PACRE);
+	writel(0, MCF_SCM_PACRF);
 
 	/* Enable bursts */
-	MCF_SCM_BCR = (MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW);
+	writel(MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW, MCF_SCM_BCR);
 }
 
 
 void fbcs_init(void)
 {
-	MCF_GPIO_PAR_CS = 0x0000003E;
+	writeb(0x3E, MCFGPIO_PAR_CS);
 
 	/* Latch chip select */
-	MCF_FBCS1_CSAR = 0x10080000;
+	writel(0x10080000, MCF_FBCS1_CSAR);
 
-	MCF_FBCS1_CSCR = 0x002A3780;
-	MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V);
+	writel(0x002A3780, MCF_FBCS1_CSCR);
+	writel(MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
 
 	/* Initialize latch to drive signals to inactive states */
-	*((u16 *)(0x10080000)) = 0xFFFF;
+	writew(0xffff, 0x10080000);
 
 	/* External SRAM */
-	MCF_FBCS1_CSAR = EXT_SRAM_ADDRESS;
-	MCF_FBCS1_CSCR = (MCF_FBCS_CSCR_PS_16
-			| MCF_FBCS_CSCR_AA
-			| MCF_FBCS_CSCR_SBM
-			| MCF_FBCS_CSCR_WS(1));
-	MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_512K
-			| MCF_FBCS_CSMR_V);
+	writel(EXT_SRAM_ADDRESS, MCF_FBCS1_CSAR);
+	writel(MCF_FBCS_CSCR_PS_16 |
+		MCF_FBCS_CSCR_AA |
+		MCF_FBCS_CSCR_SBM |
+		MCF_FBCS_CSCR_WS(1),
+		MCF_FBCS1_CSCR);
+	writel(MCF_FBCS_CSMR_BAM_512K | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
 
 	/* Boot Flash connected to FBCS0 */
-	MCF_FBCS0_CSAR = FLASH_ADDRESS;
-	MCF_FBCS0_CSCR = (MCF_FBCS_CSCR_PS_16
-			| MCF_FBCS_CSCR_BEM
-			| MCF_FBCS_CSCR_AA
-			| MCF_FBCS_CSCR_SBM
-			| MCF_FBCS_CSCR_WS(7));
-	MCF_FBCS0_CSMR = (MCF_FBCS_CSMR_BAM_32M
-			| MCF_FBCS_CSMR_V);
+	writel(FLASH_ADDRESS, MCF_FBCS0_CSAR);
+	writel(MCF_FBCS_CSCR_PS_16 |
+		MCF_FBCS_CSCR_BEM |
+		MCF_FBCS_CSCR_AA |
+		MCF_FBCS_CSCR_SBM |
+		MCF_FBCS_CSCR_WS(7),
+		MCF_FBCS0_CSCR);
+	writel(MCF_FBCS_CSMR_BAM_32M | MCF_FBCS_CSMR_V, MCF_FBCS0_CSMR);
 }
 
 void sdramc_init(void)
@@ -362,102 +368,102 @@ void sdramc_init(void)
 	 * Check to see if the SDRAM has already been initialized
 	 * by a run control tool
 	 */
-	if (!(MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)) {
+	if (!(readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)) {
 		/* SDRAM chip select initialization */
 		
 		/* Initialize SDRAM chip select */
-		MCF_SDRAMC_SDCS0 = (0
-			| MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS)
-			| MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE));
+		writel(MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) |
+			MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE),
+			MCF_SDRAMC_SDCS0);
 
 	/*
 	 * Basic configuration and initialization
 	 */
-	MCF_SDRAMC_SDCFG1 = (0
-		| MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5 ))
-		| MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1)
-		| MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL*2) + 2))
-		| MCF_SDRAMC_SDCFG1_ACT2RW((int)((SDRAM_TRCD ) + 0.5))
-		| MCF_SDRAMC_SDCFG1_PRE2ACT((int)((SDRAM_TRP ) + 0.5))
-		| MCF_SDRAMC_SDCFG1_REF2ACT((int)(((SDRAM_TRFC) ) + 0.5))
-		| MCF_SDRAMC_SDCFG1_WTLAT(3));
-	MCF_SDRAMC_SDCFG2 = (0
-		| MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL/2 + 1)
-		| MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL/2 + SDRAM_TWR)
-		| MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL+SDRAM_BL/2-1.0)+0.5))
-		| MCF_SDRAMC_SDCFG2_BL(SDRAM_BL-1));
+	writel(MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5)) |
+		MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) |
+		MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL * 2) + 2)) |
+		MCF_SDRAMC_SDCFG1_ACT2RW((int)(SDRAM_TRCD + 0.5)) |
+		MCF_SDRAMC_SDCFG1_PRE2ACT((int)(SDRAM_TRP + 0.5)) |
+		MCF_SDRAMC_SDCFG1_REF2ACT((int)(SDRAM_TRFC + 0.5)) |
+		MCF_SDRAMC_SDCFG1_WTLAT(3),
+		MCF_SDRAMC_SDCFG1);
+	writel(MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL / 2 + 1) |
+		MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL / 2 + SDRAM_TWR) |
+		MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL + SDRAM_BL / 2 - 1.0) + 0.5)) |
+		MCF_SDRAMC_SDCFG2_BL(SDRAM_BL - 1),
+		MCF_SDRAMC_SDCFG2);
 
             
 	/*
 	 * Precharge and enable write to SDMR
 	 */
-        MCF_SDRAMC_SDCR = (0
-		| MCF_SDRAMC_SDCR_MODE_EN
-		| MCF_SDRAMC_SDCR_CKE
-		| MCF_SDRAMC_SDCR_DDR
-		| MCF_SDRAMC_SDCR_MUX(1)
-		| MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI/(SYSTEM_PERIOD*64)) - 1) + 0.5))
-		| MCF_SDRAMC_SDCR_PS_16
-		| MCF_SDRAMC_SDCR_IPALL);            
+	writel(MCF_SDRAMC_SDCR_MODE_EN |
+		MCF_SDRAMC_SDCR_CKE |
+		MCF_SDRAMC_SDCR_DDR |
+		MCF_SDRAMC_SDCR_MUX(1) |
+		MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI / (SYSTEM_PERIOD * 64)) - 1) + 0.5)) |
+		MCF_SDRAMC_SDCR_PS_16 |
+		MCF_SDRAMC_SDCR_IPALL,
+		MCF_SDRAMC_SDCR);
 
 	/*
 	 * Write extended mode register
 	 */
-	MCF_SDRAMC_SDMR = (0
-		| MCF_SDRAMC_SDMR_BNKAD_LEMR
-		| MCF_SDRAMC_SDMR_AD(0x0)
-		| MCF_SDRAMC_SDMR_CMD);
+	writel(MCF_SDRAMC_SDMR_BNKAD_LEMR |
+		MCF_SDRAMC_SDMR_AD(0x0) |
+		MCF_SDRAMC_SDMR_CMD,
+		MCF_SDRAMC_SDMR);
 
 	/*
 	 * Write mode register and reset DLL
 	 */
-	MCF_SDRAMC_SDMR = (0
-		| MCF_SDRAMC_SDMR_BNKAD_LMR
-		| MCF_SDRAMC_SDMR_AD(0x163)
-		| MCF_SDRAMC_SDMR_CMD);
+	writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
+		MCF_SDRAMC_SDMR_AD(0x163) |
+		MCF_SDRAMC_SDMR_CMD,
+		MCF_SDRAMC_SDMR);
 
 	/*
 	 * Execute a PALL command
 	 */
-	MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IPALL;
+	writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IPALL, MCF_SDRAMC_SDCR);
 
 	/*
 	 * Perform two REF cycles
 	 */
-	MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF;
-	MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF;
+	writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
+	writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
 
 	/*
 	 * Write mode register and clear reset DLL
 	 */
-	MCF_SDRAMC_SDMR = (0
-		| MCF_SDRAMC_SDMR_BNKAD_LMR
-		| MCF_SDRAMC_SDMR_AD(0x063)
-		| MCF_SDRAMC_SDMR_CMD);
+	writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
+		MCF_SDRAMC_SDMR_AD(0x063) |
+		MCF_SDRAMC_SDMR_CMD,
+		MCF_SDRAMC_SDMR);
 				
 	/*
 	 * Enable auto refresh and lock SDMR
 	 */
-	MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_MODE_EN;
-	MCF_SDRAMC_SDCR |= (0
-		| MCF_SDRAMC_SDCR_REF
-		| MCF_SDRAMC_SDCR_DQS_OE(0xC));
+	writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_MODE_EN,
+		MCF_SDRAMC_SDCR);
+	writel(MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_DQS_OE(0xC),
+		MCF_SDRAMC_SDCR);
 	}
 }
 
 void gpio_init(void)
 {
 	/* Enable UART0 pins */
-	MCF_GPIO_PAR_UART = ( 0
-		| MCF_GPIO_PAR_UART_PAR_URXD0
-		| MCF_GPIO_PAR_UART_PAR_UTXD0);
-
-	/* Initialize TIN3 as a GPIO output to enable the write
-	   half of the latch */
-	MCF_GPIO_PAR_TIMER = 0x00;
-	__raw_writeb(0x08, MCFGPIO_PDDR_TIMER);
-	__raw_writeb(0x00, MCFGPIO_PCLRR_TIMER);
+	writew(MCF_GPIO_PAR_UART_PAR_URXD0 | MCF_GPIO_PAR_UART_PAR_UTXD0,
+		MCFGPIO_PAR_UART);
 
+	/*
+	 * Initialize TIN3 as a GPIO output to enable the write
+	 * half of the latch.
+	 */
+	writeb(0x00, MCFGPIO_PAR_TIMER);
+	writeb(0x08, MCFGPIO_PDDR_TIMER);
+	writeb(0x00, MCFGPIO_PCLRR_TIMER);
 }
 
 int clock_pll(int fsys, int flags)
@@ -469,7 +475,7 @@ int clock_pll(int fsys, int flags)
         
 	if (fsys == 0) {
 		/* Return current PLL output */
-		mfd = MCF_PLL_PFDR;
+		mfd = readb(MCF_PLL_PFDR);
 
 		return (fref * mfd / (BUSDIV * 4));
 	}
@@ -495,9 +501,10 @@ int clock_pll(int fsys, int flags)
 	 * If it has then the SDRAM needs to be put into self refresh
 	 * mode before reprogramming the PLL.
 	 */
-	if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)
+	if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
 		/* Put SDRAM into self refresh mode */
-		MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE;
+		writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_CKE,
+			MCF_SDRAMC_SDCR);
 
 	/*
 	 * Initialize the PLL to generate the new system clock frequency.
@@ -508,11 +515,10 @@ int clock_pll(int fsys, int flags)
 	clock_limp(DEFAULT_LPD);
      					
 	/* Reprogram PLL for desired fsys */
-	MCF_PLL_PODR = (0
-		| MCF_PLL_PODR_CPUDIV(BUSDIV/3)
-		| MCF_PLL_PODR_BUSDIV(BUSDIV));
+	writeb(MCF_PLL_PODR_CPUDIV(BUSDIV/3) | MCF_PLL_PODR_BUSDIV(BUSDIV),
+		MCF_PLL_PODR);
 						
-	MCF_PLL_PFDR = mfd;
+	writeb(mfd, MCF_PLL_PFDR);
 		
 	/* Exit LIMP mode */
 	clock_exit_limp();
@@ -520,12 +526,13 @@ int clock_pll(int fsys, int flags)
 	/*
 	 * Return the SDRAM to normal operation if it is in use.
 	 */
-	if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)
+	if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
 		/* Exit self refresh mode */
-		MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE;
+		writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
+			MCF_SDRAMC_SDCR);
 
 	/* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
-	MCF_SDRAMC_LIMP_FIX = MCF_SDRAMC_REFRESH;
+	writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
 
 	/* wait for DQS logic to relock */
 	for (i = 0; i < 0x200; i++)
@@ -546,14 +553,12 @@ int clock_limp(int div)
     
 	/* Save of the current value of the SSIDIV so we don't
 	   overwrite the value*/
-	temp = (MCF_CCM_CDR & MCF_CCM_CDR_SSIDIV(0xF));
+	temp = readw(MCF_CCM_CDR) & MCF_CCM_CDR_SSIDIV(0xF);
       
 	/* Apply the divider to the system clock */
-	MCF_CCM_CDR = ( 0
-		| MCF_CCM_CDR_LPDIV(div)
-		| MCF_CCM_CDR_SSIDIV(temp));
+	writew(MCF_CCM_CDR_LPDIV(div) | MCF_CCM_CDR_SSIDIV(temp), MCF_CCM_CDR);
     
-	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_LIMP;
+	writew(readw(MCF_CCM_MISCCR) | MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
     
 	return (FREF/(3*(1 << div)));
 }
@@ -563,10 +568,10 @@ int clock_exit_limp(void)
 	int fout;
 	
 	/* Exit LIMP mode */
-	MCF_CCM_MISCCR = (MCF_CCM_MISCCR & ~ MCF_CCM_MISCCR_LIMP);
+	writew(readw(MCF_CCM_MISCCR) & ~MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
 
 	/* Wait for PLL to lock */
-	while (!(MCF_CCM_MISCCR & MCF_CCM_MISCCR_PLL_LOCK))
+	while (!(readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_PLL_LOCK))
 		;
 	
 	fout = get_sys_clock();
@@ -579,10 +584,10 @@ int get_sys_clock(void)
 	int divider;
 	
 	/* Test to see if device is in LIMP mode */
-	if (MCF_CCM_MISCCR & MCF_CCM_MISCCR_LIMP) {
-		divider = MCF_CCM_CDR & MCF_CCM_CDR_LPDIV(0xF);
+	if (readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_LIMP) {
+		divider = readw(MCF_CCM_CDR) & MCF_CCM_CDR_LPDIV(0xF);
 		return (FREF/(2 << divider));
 	}
 	else
-		return ((FREF * MCF_PLL_PFDR) / (BUSDIV * 4));
+		return (FREF * readb(MCF_PLL_PFDR)) / (BUSDIV * 4);
 }
diff --git a/arch/m68k/platform/coldfire/m54xx.c b/arch/m68k/platform/coldfire/m54xx.c
index 2081c6cbb3de..b587bf35175b 100644
--- a/arch/m68k/platform/coldfire/m54xx.c
+++ b/arch/m68k/platform/coldfire/m54xx.c
@@ -30,14 +30,12 @@
 static void __init m54xx_uarts_init(void)
 {
 	/* enable io pins */
-	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
-		MCF_MBAR + MCF_PAR_PSC(0));
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC0);
 	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
-		MCF_MBAR + MCF_PAR_PSC(1));
+		MCFGPIO_PAR_PSC1);
 	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
-		MCF_PAR_PSC_CTS_CTS, MCF_MBAR + MCF_PAR_PSC(2));
-	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
-		MCF_MBAR + MCF_PAR_PSC(3));
+		MCF_PAR_PSC_CTS_CTS, MCFGPIO_PAR_PSC2);
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC3);
 }
 
 /***************************************************************************/
@@ -46,10 +44,10 @@ static void mcf54xx_reset(void)
 {
 	/* disable interrupts and enable the watchdog */
 	asm("movew #0x2700, %sr\n");
-	__raw_writel(0, MCF_MBAR + MCF_GPT_GMS0);
-	__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0);
+	__raw_writel(0, MCF_GPT_GMS0);
+	__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_GPT_GCIR0);
 	__raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
-						MCF_MBAR + MCF_GPT_GMS0);
+		MCF_GPT_GMS0);
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/nettel.c b/arch/m68k/platform/coldfire/nettel.c
index e925ea4602f8..ddc48ec1b800 100644
--- a/arch/m68k/platform/coldfire/nettel.c
+++ b/arch/m68k/platform/coldfire/nettel.c
@@ -121,14 +121,14 @@ static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flasha
 
 static void __init nettel_smc91x_init(void)
 {
-	writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
+	writew(0x00ec, MCFSIM_PADDR);
 	mcf_setppdata(0, 0x0080);
 	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
 	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
 	mcf_setppdata(0x0080, 0);
 
 	/* Set correct chip select timing for SMC9196 accesses */
-	writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
+	writew(0x1180, MCFSIM_CSCR3);
 
 	/* Set the SMC interrupts to be auto-vectored */
 	mcf_autovector(NETTEL_SMC0_IRQ);
diff --git a/arch/m68k/platform/coldfire/pci.c b/arch/m68k/platform/coldfire/pci.c
index 553210d3d4c1..8572246db84d 100644
--- a/arch/m68k/platform/coldfire/pci.c
+++ b/arch/m68k/platform/coldfire/pci.c
@@ -272,8 +272,8 @@ static int __init mcf_pci_init(void)
 		PACR_EXTMINTE(0x1f), PACR);
 
 	/* Set required multi-function pins for PCI bus use */
-	__raw_writew(0x3ff, MCF_PAR_PCIBG);
-	__raw_writew(0x3ff, MCF_PAR_PCIBR);
+	__raw_writew(0x3ff, MCFGPIO_PAR_PCIBG);
+	__raw_writew(0x3ff, MCFGPIO_PAR_PCIBR);
 
 	/* Set up config space for local host bus controller */
 	__raw_writel(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
diff --git a/arch/m68k/platform/coldfire/reset.c b/arch/m68k/platform/coldfire/reset.c
index 933e54eacc69..f30952f0cbe6 100644
--- a/arch/m68k/platform/coldfire/reset.c
+++ b/arch/m68k/platform/coldfire/reset.c
@@ -27,7 +27,7 @@ static void mcf_cpu_reset(void)
 {
 	local_irq_disable();
 	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	__raw_writeb(0xc0, MCFSIM_SYPCR);
 	for (;;)
 		/* wait for watchdog to timeout */;
 }
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index 2027fc20b876..bb5a25ada848 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -32,7 +32,7 @@
 /*
  *	By default use Slice Timer 1 as the profiler clock timer.
  */
-#define	PA(a)	(MCF_MBAR + MCFSLT_TIMER1 + (a))
+#define	PA(a)	(MCFSLT_TIMER1 + (a))
 
 /*
  *	Choose a reasonably fast profile timer. Make it an odd value to
@@ -76,7 +76,7 @@ void mcfslt_profile_init(void)
 /*
  *	By default use Slice Timer 0 as the system clock timer.
  */
-#define	TA(a)	(MCF_MBAR + MCFSLT_TIMER0 + (a))
+#define	TA(a)	(MCFSLT_TIMER0 + (a))
 
 static u32 mcfslt_cycles_per_jiffy;
 static u32 mcfslt_cnt;
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index 0a273e75408c..51f6d2af807f 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -56,13 +56,13 @@ static void init_timer_irq(void)
 #ifdef MCFSIM_ICR_AUTOVEC
 	/* Timer1 is always used as system timer */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
+		MCFSIM_TIMER1ICR);
 	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	/* Timer2 is to be used as a high speed profile timer  */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
+		MCFSIM_TIMER2ICR);
 	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
 #endif
 #endif /* MCFSIM_ICR_AUTOVEC */
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 8a1ce327c963..1adb5b7b0d1a 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -338,9 +338,6 @@ static __init int q40_add_kbd_device(void)
 		return -ENODEV;
 
 	pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
+	return PTR_RET(pdev);
 }
 arch_initcall(q40_add_kbd_device);
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index d8e6349336b4..eeba067d565f 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -22,57 +22,13 @@ int prom_root_node;
 struct linux_nodeops *prom_nodeops;
 
 /* You must call prom_init() before you attempt to use any of the
- * routines in the prom library.  It returns 0 on success, 1 on
- * failure.  It gets passed the pointer to the PROM vector.
+ * routines in the prom library.
+ * It gets passed the pointer to the PROM vector.
  */
 
-extern void prom_meminit(void);
-extern void prom_ranges_init(void);
-
 void __init prom_init(struct linux_romvec *rp)
 {
 	romvec = rp;
-#ifndef CONFIG_SUN3
-	switch(romvec->pv_romvers) {
-	case 0:
-		prom_vers = PROM_V0;
-		break;
-	case 2:
-		prom_vers = PROM_V2;
-		break;
-	case 3:
-		prom_vers = PROM_V3;
-		break;
-	case 4:
-		prom_vers = PROM_P1275;
-		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
-		prom_halt();
-		break;
-	default:
-		prom_printf("PROMLIB: Bad PROM version %d\n",
-			    romvec->pv_romvers);
-		prom_halt();
-		break;
-	};
-
-	prom_rev = romvec->pv_plugin_revision;
-	prom_prev = romvec->pv_printrev;
-	prom_nodeops = romvec->pv_nodeops;
-
-	prom_root_node = prom_getsibling(0);
-	if((prom_root_node == 0) || (prom_root_node == -1))
-		prom_halt();
-
-	if((((unsigned long) prom_nodeops) == 0) ||
-	   (((unsigned long) prom_nodeops) == -1))
-		prom_halt();
-
-	prom_meminit();
-
-	prom_ranges_init();
-#endif
-//	printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
-//	       romvec->pv_romvers, prom_rev);
 
 	/* Initialization successful. */
 	return;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index ab9afcaa7f6a..6133bed2b855 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -243,14 +243,11 @@ choice
 config MICROBLAZE_4K_PAGES
 	bool "4k page size"
 
-config MICROBLAZE_8K_PAGES
-	bool "8k page size"
-
 config MICROBLAZE_16K_PAGES
 	bool "16k page size"
 
-config MICROBLAZE_32K_PAGES
-	bool "32k page size"
+config MICROBLAZE_64K_PAGES
+	bool "64k page size"
 
 endchoice
 
diff --git a/arch/microblaze/include/asm/clinkage.h b/arch/microblaze/include/asm/clinkage.h
deleted file mode 100644
index 9e218435a55c..000000000000
--- a/arch/microblaze/include/asm/clinkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/linkage.h>
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
index 834849f59ae8..640ddd4b6a9b 100644
--- a/arch/microblaze/include/asm/elf.h
+++ b/arch/microblaze/include/asm/elf.h
@@ -116,7 +116,8 @@ do {							\
 } while (0)
 
 #ifdef __KERNEL__
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
 #endif
 
 #endif /* __uClinux__ */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 8cdac14b55b0..4fbfdc1ac7f8 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -35,6 +35,10 @@ extern resource_size_t isa_mem_base;
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
+/* the following is needed to support PCI with some drivers */
+
+#define mmiowb()
+
 static inline unsigned char __raw_readb(const volatile void __iomem *addr)
 {
 	return *(volatile unsigned char __force *)addr;
@@ -248,4 +252,94 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define ioport_map(port, nr)	((void __iomem *)(port))
 #define ioport_unmap(addr)
 
+/* from asm-generic/io.h */
+#ifndef insb
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u8 *buf = buffer;
+		do {
+			u8 x = inb(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef insw
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u16 *buf = buffer;
+		do {
+			u16 x = inw(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef insl
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+		do {
+			u32 x = inl(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef outsb
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u8 *buf = buffer;
+		do {
+			outb(*buf++, addr);
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef outsw
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u16 *buf = buffer;
+		do {
+			outw(*buf++, addr);
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef outsl
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u32 *buf = buffer;
+		do {
+			outl(*buf++, addr);
+		} while (--count);
+	}
+}
+#endif
+
+#define ioread8_rep(p, dst, count) \
+	insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+	insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+	insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+	outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+	outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+	outsl((unsigned long) (p), (src), (count))
+
 #endif /* _ASM_MICROBLAZE_IO_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 24eab1674d3e..0ccd8c402cd9 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_MMU
-# include "mmu_context_mm.h"
+# include <asm/mmu_context_mm.h>
 #else
 # include <asm-generic/mmu_context.h>
 #endif
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 287c5485d286..85a5ae8e9bd0 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -23,12 +23,10 @@
 #ifdef __KERNEL__
 
 /* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_MICROBLAZE_32K_PAGES)
-#define PAGE_SHIFT		15
+#if defined(CONFIG_MICROBLAZE_64K_PAGES)
+#define PAGE_SHIFT		16
 #elif defined(CONFIG_MICROBLAZE_16K_PAGES)
 #define PAGE_SHIFT		14
-#elif defined(CONFIG_MICROBLAZE_8K_PAGES)
-#define PAGE_SHIFT		13
 #else
 #define PAGE_SHIFT		12
 #endif
@@ -37,6 +35,8 @@
 
 #define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
 
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+
 #ifndef __ASSEMBLY__
 
 /* MS be sure that SLAB allocates aligned objects */
@@ -71,7 +71,6 @@ extern unsigned int __page_offset;
  * The basic type of a PTE - 32 bit physical addressing.
  */
 typedef unsigned long pte_basic_t;
-#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
 #define PTE_FMT		"%.8lx"
 
 #endif /* CONFIG_MMU */
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index a0da88bf70c5..41cc841091b0 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -22,6 +22,8 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 
+#include <asm-generic/pci-dma-compat.h>
+
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
 
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 3ef7b9cafeca..a7311cd9dee0 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -234,12 +234,6 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 #ifndef _PAGE_SHARED
 #define _PAGE_SHARED	0
 #endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE	0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC	0
-#endif
 #ifndef _PAGE_EXEC
 #define _PAGE_EXEC	0
 #endif
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index 4487e150b455..c07ed5d2a820 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[];
 extern unsigned long __ivt_start[], __ivt_end[];
 extern char _etext[], _stext[];
 
-#  ifdef CONFIG_MTD_UCLINUX
-extern char *_ebss;
-#  endif
-
 extern u32 _fdt_start[], _fdt_end[];
 
 # endif /* !__ASSEMBLY__ */
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 98b17f9f904b..eef84de5e8c8 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -109,20 +109,24 @@ no_fdt_arg:
 #ifndef CONFIG_CMDLINE_BOOL
 /*
  * handling command line
- * copy command line to __init_end. There is space for storing command line.
+ * copy command line directly to cmd_line placed in data section.
  */
+	beqid	r5, skip	/* Skip if NULL pointer */
 	or	r6, r0, r0		/* incremment */
-	ori	r4, r0, __init_end	/* load address of command line */
+	ori	r4, r0, cmd_line	/* load address of command line */
 	tophys(r4,r4)			/* convert to phys address */
 	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
 _copy_command_line:
-	lbu	r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */
-	sb	r2, r4, r6		/* addr[r4+r6]= r2*/
+	/* r2=r5+r6 - r5 contain pointer to command line */
+	lbu		r2, r5, r6
+	beqid	r2, skip		/* Skip if no data */
+	sb		r2, r4, r6		/* addr[r4+r6]= r2*/
 	addik	r6, r6, 1		/* increment counting */
 	bgtid	r3, _copy_command_line	/* loop for all entries       */
-	addik	r3, r3, -1		/* descrement loop */
+	addik	r3, r3, -1		/* decrement loop */
 	addik	r5, r4, 0		/* add new space for command line */
 	tovirt(r5,r5)
+skip:
 #endif /* CONFIG_CMDLINE_BOOL */
 
 #ifdef NOT_COMPILE
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index aa510f450ac6..61b3a1fed46f 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -75,6 +75,7 @@
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
 #include <asm/signal.h>
+#include <asm/registers.h>
 #include <asm/asm-offsets.h>
 
 #undef DEBUG
@@ -581,7 +582,7 @@ ex_handler_done:
 		 * tried to access a kernel or read-protected page - always
 		 * a SEGV). All other faults here must be stores, so no
 		 * need to check ESR_S as well. */
-		andi	r4, r4, 0x800		/* ESR_Z - zone protection */
+		andi	r4, r4, ESR_DIZ		/* ESR_Z - zone protection */
 		bnei	r4, ex2
 
 		ori	r4, r0, swapper_pg_dir
@@ -595,25 +596,25 @@ ex_handler_done:
 		 * tried to access a kernel or read-protected page - always
 		 * a SEGV). All other faults here must be stores, so no
 		 * need to check ESR_S as well. */
-		andi	r4, r4, 0x800		/* ESR_Z */
+		andi	r4, r4, ESR_DIZ		/* ESR_Z */
 		bnei	r4, ex2
 		/* get current task address */
 		addi	r4 ,CURRENT_TASK, TOPHYS(0);
 		lwi	r4, r4, TASK_THREAD+PGDIR
 	ex4:
 		tophys(r4,r4)
-		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
-		andi	r5, r5, 0xffc
+		/* Create L1 (pgdir/pmd) address */
+		BSRLI(r5,r3, PGDIR_SHIFT - 2)
+		andi	r5, r5, PAGE_SIZE - 4
 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
 		or	r4, r4, r5
 		lwi	r4, r4, 0		/* Get L1 entry */
-		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		andi	r5, r4, PAGE_MASK /* Extract L2 (pte) base address */
 		beqi	r5, ex2			/* Bail if no table */
 
 		tophys(r5,r5)
-		BSRLI(r6,r3,10)			/* Compute PTE address */
-		andi	r6, r6, 0xffc
-		andi	r5, r5, 0xfffff003
+		BSRLI(r6,r3,PTE_SHIFT) /* Compute PTE address */
+		andi	r6, r6, PAGE_SIZE - 4
 		or	r5, r5, r6
 		lwi	r4, r5, 0		/* Get Linux PTE */
 
@@ -632,7 +633,9 @@ ex_handler_done:
 		 * Many of these bits are software only. Bits we don't set
 		 * here we (properly should) assume have the appropriate value.
 		 */
-		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+/* Ignore memory coherent, just LSB on ZSEL is used + EX/WR */
+		andi	r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \
+						TLB_ZSEL(1) | TLB_ATTR_MASK
 		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
 
 		/* find the TLB index that caused the fault. It has to be here*/
@@ -701,18 +704,18 @@ ex_handler_done:
 		lwi	r4, r4, TASK_THREAD+PGDIR
 	ex6:
 		tophys(r4,r4)
-		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
-		andi	r5, r5, 0xffc
+		/* Create L1 (pgdir/pmd) address */
+		BSRLI(r5,r3, PGDIR_SHIFT - 2)
+		andi	r5, r5, PAGE_SIZE - 4
 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
 		or	r4, r4, r5
 		lwi	r4, r4, 0		/* Get L1 entry */
-		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		andi	r5, r4, PAGE_MASK /* Extract L2 (pte) base address */
 		beqi	r5, ex7			/* Bail if no table */
 
 		tophys(r5,r5)
-		BSRLI(r6,r3,10)			/* Compute PTE address */
-		andi	r6, r6, 0xffc
-		andi	r5, r5, 0xfffff003
+		BSRLI(r6,r3,PTE_SHIFT) /* Compute PTE address */
+		andi	r6, r6, PAGE_SIZE - 4
 		or	r5, r5, r6
 		lwi	r4, r5, 0		/* Get Linux PTE */
 
@@ -731,7 +734,8 @@ ex_handler_done:
 		 * here we (properly should) assume have the appropriate value.
 		 */
 		brid	finish_tlb_load
-		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+		andi	r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \
+						TLB_ZSEL(1) | TLB_ATTR_MASK
 	ex7:
 		/* The bailout. Restore registers to pre-exception conditions
 		 * and call the heavyweights to help us out.
@@ -771,18 +775,18 @@ ex_handler_done:
 		lwi	r4, r4, TASK_THREAD+PGDIR
 	ex9:
 		tophys(r4,r4)
-		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
-		andi	r5, r5, 0xffc
+		/* Create L1 (pgdir/pmd) address */
+		BSRLI(r5,r3, PGDIR_SHIFT - 2)
+		andi	r5, r5, PAGE_SIZE - 4
 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
 		or	r4, r4, r5
 		lwi	r4, r4, 0		/* Get L1 entry */
-		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		andi	r5, r4, PAGE_MASK /* Extract L2 (pte) base address */
 		beqi	r5, ex10		/* Bail if no table */
 
 		tophys(r5,r5)
-		BSRLI(r6,r3,10)			/* Compute PTE address */
-		andi	r6, r6, 0xffc
-		andi	r5, r5, 0xfffff003
+		BSRLI(r6,r3,PTE_SHIFT) /* Compute PTE address */
+		andi	r6, r6, PAGE_SIZE - 4
 		or	r5, r5, r6
 		lwi	r4, r5, 0		/* Get Linux PTE */
 
@@ -801,7 +805,8 @@ ex_handler_done:
 		 * here we (properly should) assume have the appropriate value.
 		 */
 		brid	finish_tlb_load
-		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+		andi	r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \
+						TLB_ZSEL(1) | TLB_ATTR_MASK
 	ex10:
 		/* The bailout. Restore registers to pre-exception conditions
 		 * and call the heavyweights to help us out.
@@ -854,8 +859,14 @@ ex_handler_done:
 		 * set of bits. These are size, valid, E, U0, and ensure
 		 * bits 20 and 21 are zero.
 		 */
-		andi	r3, r3, 0xfffff000
-		ori	r3, r3, 0x0c0
+		andi	r3, r3, PAGE_MASK
+#ifdef CONFIG_MICROBLAZE_64K_PAGES
+		ori	r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_64K)
+#elif CONFIG_MICROBLAZE_16K_PAGES
+		ori	r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_16K)
+#else
+		ori	r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_4K)
+#endif
 		mts	rtlbhi,	r3		/* Load TLB HI */
 		nop
 
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index bb4907c828dc..2b25bcf05c00 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -21,9 +21,6 @@
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
 
-extern char *_ebss;
-EXPORT_SYMBOL_GPL(_ebss);
-
 #ifdef CONFIG_FUNCTION_TRACER
 extern void _mcount(void);
 EXPORT_SYMBOL(_mcount);
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index 88a01636f785..2e5079ab53d2 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -26,13 +26,14 @@ void of_platform_reset_gpio_probe(void)
 				   "hard-reset-gpios", 0);
 
 	if (!gpio_is_valid(handle)) {
-		printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",
+		pr_info("Skipping unavailable RESET gpio %d (%s)\n",
 				handle, "reset");
+		return;
 	}
 
 	ret = gpio_request(handle, "reset");
 	if (ret < 0) {
-		printk(KERN_INFO "GPIO pin is already allocated\n");
+		pr_info("GPIO pin is already allocated\n");
 		return;
 	}
 
@@ -49,7 +50,7 @@ void of_platform_reset_gpio_probe(void)
 	/* Setup output direction */
 	gpio_set_value(handle, 0);
 
-	printk(KERN_INFO "RESET: Registered gpio device: %d, current val: %d\n",
+	pr_info("RESET: Registered gpio device: %d, current val: %d\n",
 							handle, reset_val);
 	return;
 err:
@@ -60,7 +61,10 @@ err:
 
 static void gpio_system_reset(void)
 {
-	gpio_set_value(handle, 1 - reset_val);
+	if (gpio_is_valid(handle))
+		gpio_set_value(handle, 1 - reset_val);
+	else
+		pr_notice("Reset GPIO unavailable - halting!\n");
 }
 #else
 #define gpio_system_reset() do {} while (0)
@@ -72,30 +76,29 @@ void of_platform_reset_gpio_probe(void)
 
 void machine_restart(char *cmd)
 {
-	printk(KERN_NOTICE "Machine restart...\n");
+	pr_notice("Machine restart...\n");
 	gpio_system_reset();
-	dump_stack();
 	while (1)
 		;
 }
 
 void machine_shutdown(void)
 {
-	printk(KERN_NOTICE "Machine shutdown...\n");
+	pr_notice("Machine shutdown...\n");
 	while (1)
 		;
 }
 
 void machine_halt(void)
 {
-	printk(KERN_NOTICE "Machine halt...\n");
+	pr_notice("Machine halt...\n");
 	while (1)
 		;
 }
 
 void machine_power_off(void)
 {
-	printk(KERN_NOTICE "Machine power off...\n");
+	pr_notice("Machine power off...\n");
 	while (1)
 		;
 }
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 16d8dfd9094b..954348f83505 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -40,7 +40,12 @@ DEFINE_PER_CPU(unsigned int, R11_SAVE);	/* Temp variable for entry */
 DEFINE_PER_CPU(unsigned int, CURRENT_SAVE);	/* Saved current pointer */
 
 unsigned int boot_cpuid;
-char cmd_line[COMMAND_LINE_SIZE];
+/*
+ * Placed cmd_line to .data section because can be initialized from
+ * ASM code. Default position is BSS section which is cleared
+ * in machine_early_init().
+ */
+char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data")));
 
 void __init setup_arch(char **cmdline_p)
 {
@@ -64,7 +69,7 @@ void __init setup_arch(char **cmdline_p)
 	xilinx_pci_init();
 
 #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
-	printk(KERN_NOTICE "Self modified code enable\n");
+	pr_notice("Self modified code enable\n");
 #endif
 
 #ifdef CONFIG_VT
@@ -121,7 +126,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 
 	/* Move ROMFS out of BSS before clearing it */
 	if (romfs_size > 0) {
-		memmove(&_ebss, (int *)romfs_base, romfs_size);
+		memmove(&__bss_stop, (int *)romfs_base, romfs_size);
 		klimit += romfs_size;
 	}
 #endif
@@ -130,12 +135,6 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	memset(__bss_start, 0, __bss_stop-__bss_start);
 	memset(_ssbss, 0, _esbss-_ssbss);
 
-	/* Copy command line passed from bootloader */
-#ifndef CONFIG_CMDLINE_BOOL
-	if (cmdline && cmdline[0] != '\0')
-		strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
-#endif
-
 	lockdep_init();
 
 /* initialize device tree for usage in early_printk */
@@ -165,7 +164,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	BUG_ON(romfs_size < 0); /* What else can we do? */
 
 	printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
-			romfs_size, romfs_base, (unsigned)&_ebss);
+			romfs_size, romfs_base, (unsigned)&__bss_stop);
 
 	printk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 76b9722557db..c1220dbf87cd 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -290,15 +290,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 	case -ERESTARTNOINTR:
 do_restart:
 		/* offset of 4 bytes to re-execute trap (brki) instruction */
-#ifndef CONFIG_MMU
 		regs->pc -= 4;
-#else
-		/* offset of 8 bytes required = 4 for rtbd
-		   offset, plus 4 for size of
-			"brki r14,8"
-		   instruction. */
-		regs->pc -= 8;
-#endif
 		break;
 	}
 }
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 522defa7d41f..aec5020a6e31 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -116,21 +116,21 @@ static void microblaze_timer_set_mode(enum clock_event_mode mode,
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_INFO "%s: periodic\n", __func__);
+		pr_info("%s: periodic\n", __func__);
 		microblaze_timer0_start_periodic(freq_div_hz);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		printk(KERN_INFO "%s: oneshot\n", __func__);
+		pr_info("%s: oneshot\n", __func__);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
-		printk(KERN_INFO "%s: unused\n", __func__);
+		pr_info("%s: unused\n", __func__);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		printk(KERN_INFO "%s: shutdown\n", __func__);
+		pr_info("%s: shutdown\n", __func__);
 		microblaze_timer0_stop();
 		break;
 	case CLOCK_EVT_MODE_RESUME:
-		printk(KERN_INFO "%s: resume\n", __func__);
+		pr_info("%s: resume\n", __func__);
 		break;
 	}
 }
@@ -257,7 +257,15 @@ void __init time_init(void)
 				0
 			};
 #endif
-	timer = of_find_compatible_node(NULL, NULL, "xlnx,xps-timer-1.00.a");
+	prop = of_get_property(of_chosen, "system-timer", NULL);
+	if (prop)
+		timer = of_find_node_by_phandle(be32_to_cpup(prop));
+	else
+		pr_info("No chosen timer found, using default\n");
+
+	if (!timer)
+		timer = of_find_compatible_node(NULL, NULL,
+						"xlnx,xps-timer-1.00.a");
 	BUG_ON(!timer);
 
 	timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL));
@@ -266,14 +274,14 @@ void __init time_init(void)
 	timer_num = be32_to_cpup(of_get_property(timer,
 						"xlnx,one-timer-only", NULL));
 	if (timer_num) {
-		printk(KERN_EMERG "Please enable two timers in HW\n");
+		pr_emerg("Please   enable two timers in HW\n");
 		BUG();
 	}
 
 #ifdef CONFIG_SELFMOD_TIMER
 	selfmod_function((int *) arr_func, timer_baseaddr);
 #endif
-	printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n",
+	pr_info("%s #0 at 0x%08x, irq=%d\n",
 		timer->name, timer_baseaddr, irq);
 
 	/* If there is clock-frequency property than use it */
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 109e9d86ade4..936d01a689d7 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -131,7 +131,6 @@ SECTIONS {
 			*(COMMON)
 		. = ALIGN (4) ;
 		__bss_stop = . ;
-		_ebss = . ;
 	}
 	. = ALIGN(PAGE_SIZE);
 	_end = .;
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 331d574df99c..faf65286574e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -89,6 +89,7 @@ config ATH79
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select HAVE_CLK
 	select IRQ_CPU
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 99969484c475..a124c251c0c9 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert)
 	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
 	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
 	 */
+	udelay(1);
+
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
 		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c
index 36e9570e7bc4..b2a2311ec85b 100644
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void)
 
 	ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
 	ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+	ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
+	ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
 	platform_device_register(&ath79_ohci_device);
 }
 
diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c
index 29054f211832..48fe762d2526 100644
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void)
 
 	if (soc_is_ar71xx())
 		ath79_gpio_count = AR71XX_GPIO_COUNT;
-	else if (soc_is_ar724x())
-		ath79_gpio_count = AR724X_GPIO_COUNT;
+	else if (soc_is_ar7240())
+		ath79_gpio_count = AR7240_GPIO_COUNT;
+	else if (soc_is_ar7241() || soc_is_ar7242())
+		ath79_gpio_count = AR7241_GPIO_COUNT;
 	else if (soc_is_ar913x())
 		ath79_gpio_count = AR913X_GPIO_COUNT;
 	else if (soc_is_ar933x())
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index feb05258a4d1..dd18e4b761a8 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -632,7 +632,7 @@ static struct board_info __initdata board_DWVS0 = {
 /*
  * all boards
  */
-static const struct board_info __initdata *bcm963xx_boards[] = {
+static const struct board_info __initconst *bcm963xx_boards[] = {
 #ifdef CONFIG_BCM63XX_CPU_6328
 	&board_96328avng,
 #endif
diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
index e39f73048d4f..f1c9c3e2f678 100644
--- a/arch/mips/bcm63xx/dev-spi.c
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void)
 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
 		spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
 		spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
+		spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT;
+		spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
 	}
 
 	if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
 		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+		spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH;
 	}
 
 	bcm63xx_spi_regs_init();
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 7fb1f222b8a5..274cd4fad30c 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit,
 	octeon_irq_ciu_to_irq[line][bit] = irq;
 }
 
+static void octeon_irq_force_ciu_mapping(struct irq_domain *domain,
+					 int irq, int line, int bit)
+{
+	irq_domain_associate(domain, irq, line << 6 | bit);
+}
+
 static int octeon_coreid_for_cpu(int cpu)
 {
 #ifdef CONFIG_SMP
@@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void)
 		mutex_init(&cd->core_irq_mutex);
 
 		irq = OCTEON_IRQ_SW0 + i;
-		switch (irq) {
-		case OCTEON_IRQ_TIMER:
-		case OCTEON_IRQ_SW0:
-		case OCTEON_IRQ_SW1:
-		case OCTEON_IRQ_5:
-		case OCTEON_IRQ_PERF:
-			irq_set_chip_data(irq, cd);
-			irq_set_chip_and_handler(irq, &octeon_irq_chip_core,
-						 handle_percpu_irq);
-			break;
-		default:
-			break;
-		}
+		irq_set_chip_data(irq, cd);
+		irq_set_chip_and_handler(irq, &octeon_irq_chip_core,
+					 handle_percpu_irq);
 	}
 }
 
@@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d,
 	unsigned int type;
 	unsigned int pin;
 	unsigned int trigger;
-	struct octeon_irq_gpio_domain_data *gpiod;
 
 	if (d->of_node != node)
 		return -EINVAL;
@@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d,
 		break;
 	}
 	*out_type = type;
-	gpiod = d->host_data;
-	*out_hwirq = gpiod->base_hwirq + pin;
+	*out_hwirq = pin;
 
 	return 0;
 }
@@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d,
 static int octeon_irq_gpio_map(struct irq_domain *d,
 			       unsigned int virq, irq_hw_number_t hw)
 {
-	unsigned int line = hw >> 6;
-	unsigned int bit = hw & 63;
+	struct octeon_irq_gpio_domain_data *gpiod = d->host_data;
+	unsigned int line, bit;
 
 	if (!octeon_irq_virq_in_range(virq))
 		return -EINVAL;
 
+	hw += gpiod->base_hwirq;
+	line = hw >> 6;
+	bit = hw & 63;
 	if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0)
 		return -EINVAL;
 
 	octeon_irq_set_ciu_mapping(virq, line, bit,
 				   octeon_irq_gpio_chip,
 				   octeon_irq_handle_gpio);
-
 	return 0;
 }
 
@@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void)
 	struct irq_chip *chip_wd;
 	struct device_node *gpio_node;
 	struct device_node *ciu_node;
+	struct irq_domain *ciu_domain = NULL;
 
 	octeon_irq_init_ciu_percpu();
 	octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu;
@@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void)
 	/* Mips internal */
 	octeon_irq_init_core();
 
-	/* CIU_0 */
-	for (i = 0; i < 16; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
-
-	for (i = 0; i < 4; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq);
-	for (i = 0; i < 4; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq);
-	for (i = 0; i < 4; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq);
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq);
-
-	/* CIU_1 */
-	for (i = 0; i < 16; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
-
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq);
-
 	gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio");
 	if (gpio_node) {
 		struct octeon_irq_gpio_domain_data *gpiod;
@@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void)
 
 	ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu");
 	if (ciu_node) {
-		irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
+		ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
 		of_node_put(ciu_node);
 	} else
-		pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n");
+		panic("Cannot find device node for cavium,octeon-3860-ciu.");
+
+	/* CIU_0 */
+	for (i = 0; i < 16; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0);
+
+	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
+	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
+
+	for (i = 0; i < 4; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36);
+	for (i = 0; i < 4; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40);
+
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46);
+	for (i = 0; i < 4; i++)
+		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52);
+
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56);
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63);
+
+	/* CIU_1 */
+	for (i = 0; i < 16; i++)
+		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
+
+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17);
 
 	/* Enable the CIU lines */
 	set_c0_status(STATUSF_IP3 | STATUSF_IP2);
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 138b2216b4f8..569f41bdcc46 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -47,40 +47,40 @@ static int __devinit octeon_serial_probe(struct platform_device *pdev)
 {
 	int irq, res;
 	struct resource *res_mem;
-	struct uart_port port;
+	struct uart_8250_port up;
 
 	/* All adaptors have an irq.  */
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 
-	memset(&port, 0, sizeof(port));
+	memset(&up, 0, sizeof(up));
 
-	port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-	port.type = PORT_OCTEON;
-	port.iotype = UPIO_MEM;
-	port.regshift = 3;
-	port.dev = &pdev->dev;
+	up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+	up.port.type = PORT_OCTEON;
+	up.port.iotype = UPIO_MEM;
+	up.port.regshift = 3;
+	up.port.dev = &pdev->dev;
 
 	if (octeon_is_simulation())
 		/* Make simulator output fast*/
-		port.uartclk = 115200 * 16;
+		up.port.uartclk = 115200 * 16;
 	else
-		port.uartclk = octeon_get_io_clock_rate();
+		up.port.uartclk = octeon_get_io_clock_rate();
 
-	port.serial_in = octeon_serial_in;
-	port.serial_out = octeon_serial_out;
-	port.irq = irq;
+	up.port.serial_in = octeon_serial_in;
+	up.port.serial_out = octeon_serial_out;
+	up.port.irq = irq;
 
 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res_mem == NULL) {
 		dev_err(&pdev->dev, "found no memory resource\n");
 		return -ENXIO;
 	}
-	port.mapbase = res_mem->start;
-	port.membase = ioremap(res_mem->start, resource_size(res_mem));
+	up.port.mapbase = res_mem->start;
+	up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
 
-	res = serial8250_register_port(&port);
+	res = serial8250_register_8250_port(&up);
 
 	return res >= 0 ? 0 : res;
 }
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index 6cd5a519ce5c..80e012fa409c 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -56,7 +56,6 @@ CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index ad15fb10322b..b6fde2bb51b6 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -96,7 +96,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index d1606569b001..936ec5a5ed8d 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -87,7 +87,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 92a60aecad5c..0315ee37a20b 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -60,7 +60,6 @@ CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 5527abbb7dea..cd732e5b4fd5 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -86,7 +86,6 @@ CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index 9c9a123016c0..636f82b89fd3 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -59,7 +59,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig
index 28c6b276c216..84624b17b769 100644
--- a/arch/mips/configs/nlm_xlp_defconfig
+++ b/arch/mips/configs/nlm_xlp_defconfig
@@ -108,7 +108,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
index 138f698d7c00..44b473420d51 100644
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -109,7 +109,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 2c0230e76d20..59d9d2fdcd48 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -68,7 +68,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h
index 368a99e5c3e1..6599a901b63e 100644
--- a/arch/mips/include/asm/compat-signal.h
+++ b/arch/mips/include/asm/compat-signal.h
@@ -10,68 +10,6 @@
 
 #include <asm/uaccess.h>
 
-#define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
-
-typedef struct compat_siginfo {
-	int si_signo;
-	int si_code;
-	int si_errno;
-
-	union {
-		int _pad[SI_PAD_SIZE32];
-
-		/* kill() */
-		struct {
-			compat_pid_t _pid;	/* sender's pid */
-			compat_uid_t _uid;	/* sender's uid */
-		} _kill;
-
-		/* SIGCHLD */
-		struct {
-			compat_pid_t _pid;	/* which child */
-			compat_uid_t _uid;	/* sender's uid */
-			int _status;		/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* IRIX SIGCHLD */
-		struct {
-			compat_pid_t _pid;	/* which child */
-			compat_clock_t _utime;
-			int _status;		/* exit code */
-			compat_clock_t _stime;
-		} _irix_sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			s32 _addr; /* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL, SIGXFSZ (To do ...)  */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;/* same as below */
-			int _sys_private;       /* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			compat_pid_t _pid;	/* sender's pid */
-			compat_uid_t _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-	} _sifields;
-} compat_siginfo_t;
-
 static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d,
 	const sigset_t *s)
 {
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index b77df0366ee6..58277e0e9cd4 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -43,6 +43,7 @@ typedef s64		compat_s64;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
 typedef u64		compat_u64;
+typedef u32		compat_uptr_t;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
@@ -124,6 +125,73 @@ typedef u32		compat_old_sigset_t;	/* at least 32 bits */
 
 typedef u32		compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+#define SI_PAD_SIZE32	(128/sizeof(int) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_code;
+	int si_errno;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			__compat_uid_t _uid;	/* sender's uid */
+		} _kill;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			__compat_uid_t _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* IRIX SIGCHLD */
+		struct {
+			compat_pid_t _pid;	/* which child */
+			compat_clock_t _utime;
+			int _status;		/* exit code */
+			compat_clock_t _stime;
+		} _irix_sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			s32 _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			__compat_uid_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+	} _sifields;
+} compat_siginfo_t;
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
@@ -133,7 +201,6 @@ typedef u32		compat_sigset_word;
  * as pointers because the syscall entry code will have
  * appropriately converted them already.
  */
-typedef u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index 1caa78ad06d5..dde504477fac 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -393,7 +393,8 @@
 #define AR71XX_GPIO_REG_FUNC		0x28
 
 #define AR71XX_GPIO_COUNT		16
-#define AR724X_GPIO_COUNT		18
+#define AR7240_GPIO_COUNT		18
+#define AR7241_GPIO_COUNT		20
 #define AR913X_GPIO_COUNT		22
 #define AR933X_GPIO_COUNT		30
 #define AR934X_GPIO_COUNT		23
diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
index 4476fa03bf36..6ddae926bf79 100644
--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
@@ -42,7 +42,6 @@
 #define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 
-#define cpu_has_dsp		0
 #define cpu_has_mipsmt		0
 
 #define cpu_has_64bits		0
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
index 7d98dbe5d4b5..c9bae1362606 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void);
 
 struct bcm63xx_spi_pdata {
 	unsigned int	fifo_size;
+	unsigned int	msg_type_shift;
+	unsigned int	msg_ctl_width;
 	int		bus_num;
 	int		num_chipselect;
 	u32		speed_hz;
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
index 9203d90e610c..03a54df5fb86 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
@@ -1,7 +1,7 @@
 #ifndef BCM63XX_IO_H_
 #define BCM63XX_IO_H_
 
-#include "bcm63xx_cpu.h"
+#include <asm/mach-bcm63xx/bcm63xx_cpu.h>
 
 /*
  * Physical memory map, RAM is mapped at 0x0.
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 4ccc2a748aff..61f2a2a5099d 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -1054,7 +1054,8 @@
 #define SPI_6338_FILL_BYTE		0x07
 #define SPI_6338_MSG_TAIL		0x09
 #define SPI_6338_RX_TAIL		0x0b
-#define SPI_6338_MSG_CTL		0x40
+#define SPI_6338_MSG_CTL		0x40	/* 8-bits register */
+#define SPI_6338_MSG_CTL_WIDTH		8
 #define SPI_6338_MSG_DATA		0x41
 #define SPI_6338_MSG_DATA_SIZE		0x3f
 #define SPI_6338_RX_DATA		0x80
@@ -1070,7 +1071,8 @@
 #define SPI_6348_FILL_BYTE		0x07
 #define SPI_6348_MSG_TAIL		0x09
 #define SPI_6348_RX_TAIL		0x0b
-#define SPI_6348_MSG_CTL		0x40
+#define SPI_6348_MSG_CTL		0x40	/* 8-bits register */
+#define SPI_6348_MSG_CTL_WIDTH		8
 #define SPI_6348_MSG_DATA		0x41
 #define SPI_6348_MSG_DATA_SIZE		0x3f
 #define SPI_6348_RX_DATA		0x80
@@ -1078,6 +1080,7 @@
 
 /* BCM 6358 SPI core */
 #define SPI_6358_MSG_CTL		0x00	/* 16-bits register */
+#define SPI_6358_MSG_CTL_WIDTH		16
 #define SPI_6358_MSG_DATA		0x02
 #define SPI_6358_MSG_DATA_SIZE		0x21e
 #define SPI_6358_RX_DATA		0x400
@@ -1094,6 +1097,7 @@
 
 /* BCM 6358 SPI core */
 #define SPI_6368_MSG_CTL		0x00	/* 16-bits register */
+#define SPI_6368_MSG_CTL_WIDTH		16
 #define SPI_6368_MSG_DATA		0x02
 #define SPI_6368_MSG_DATA_SIZE		0x21e
 #define SPI_6368_RX_DATA		0x400
@@ -1115,7 +1119,10 @@
 #define SPI_HD_W			0x01
 #define SPI_HD_R			0x02
 #define SPI_BYTE_CNT_SHIFT		0
-#define SPI_MSG_TYPE_SHIFT		14
+#define SPI_6338_MSG_TYPE_SHIFT		6
+#define SPI_6348_MSG_TYPE_SHIFT		6
+#define SPI_6358_MSG_TYPE_SHIFT		14
+#define SPI_6368_MSG_TYPE_SHIFT		14
 
 /* Command */
 #define SPI_CMD_NOOP			0x00
diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h
index 418992042f6f..c22a3078bf11 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/irq.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h
@@ -21,14 +21,10 @@ enum octeon_irq {
 	OCTEON_IRQ_TIMER,
 /* sources in CIU_INTX_EN0 */
 	OCTEON_IRQ_WORKQ0,
-	OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16,
-	OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16,
+	OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16,
 	OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15,
 	OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16,
 	OCTEON_IRQ_MBOX1,
-	OCTEON_IRQ_UART0,
-	OCTEON_IRQ_UART1,
-	OCTEON_IRQ_UART2,
 	OCTEON_IRQ_PCI_INT0,
 	OCTEON_IRQ_PCI_INT1,
 	OCTEON_IRQ_PCI_INT2,
@@ -38,8 +34,6 @@ enum octeon_irq {
 	OCTEON_IRQ_PCI_MSI2,
 	OCTEON_IRQ_PCI_MSI3,
 
-	OCTEON_IRQ_TWSI,
-	OCTEON_IRQ_TWSI2,
 	OCTEON_IRQ_RML,
 	OCTEON_IRQ_TIMER0,
 	OCTEON_IRQ_TIMER1,
@@ -47,8 +41,6 @@ enum octeon_irq {
 	OCTEON_IRQ_TIMER3,
 	OCTEON_IRQ_USB0,
 	OCTEON_IRQ_USB1,
-	OCTEON_IRQ_MII0,
-	OCTEON_IRQ_MII1,
 	OCTEON_IRQ_BOOTDMA,
 #ifndef CONFIG_PCI_MSI
 	OCTEON_IRQ_LAST = 127
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h
index ed3a88da70f6..f192acf4a8af 100644
--- a/arch/mips/include/asm/mach-pnx833x/gpio.h
+++ b/arch/mips/include/asm/mach-pnx833x/gpio.h
@@ -30,7 +30,7 @@
    - including locking between different uses
 */
 
-#include "pnx833x.h"
+#include <asm/mach-pnx833x/pnx833x.h>
 
 #define SET_REG_BIT(reg, bit)		do { (reg |= (1 << (bit))); } while (0)
 #define CLEAR_REG_BIT(reg, bit)		do { (reg &= ~(1 << (bit))); } while (0)
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 7531ecd654d6..dca8bce8c7ab 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -10,6 +10,7 @@ struct mod_arch_specific {
 	struct list_head dbe_list;
 	const struct exception_table_entry *dbe_start;
 	const struct exception_table_entry *dbe_end;
+	struct mips_hi16 *r_mips_hi16_list;
 };
 
 typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
diff --git a/arch/mips/include/asm/octeon/cvmx-asm.h b/arch/mips/include/asm/octeon/cvmx-asm.h
index 5de5de95311b..31eacc24b775 100644
--- a/arch/mips/include/asm/octeon/cvmx-asm.h
+++ b/arch/mips/include/asm/octeon/cvmx-asm.h
@@ -32,7 +32,7 @@
 #ifndef __CVMX_ASM_H__
 #define __CVMX_ASM_H__
 
-#include "octeon-model.h"
+#include <asm/octeon/octeon-model.h>
 
 /* other useful stuff */
 #define CVMX_SYNC asm volatile ("sync" : : : "memory")
diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
index 614653b686a0..fed91125317f 100644
--- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@@ -76,7 +76,7 @@
 
 #include <linux/prefetch.h>
 
-#include "cvmx-fpa.h"
+#include <asm/octeon/cvmx-fpa.h>
 /**
  * By default we disable the max depth support. Most programs
  * don't use it and it slows down the command queue processing
diff --git a/arch/mips/include/asm/octeon/cvmx-fpa.h b/arch/mips/include/asm/octeon/cvmx-fpa.h
index 1f04f9658736..541a1ae02b6f 100644
--- a/arch/mips/include/asm/octeon/cvmx-fpa.h
+++ b/arch/mips/include/asm/octeon/cvmx-fpa.h
@@ -36,8 +36,8 @@
 #ifndef __CVMX_FPA_H__
 #define __CVMX_FPA_H__
 
-#include "cvmx-address.h"
-#include "cvmx-fpa-defs.h"
+#include <asm/octeon/cvmx-address.h>
+#include <asm/octeon/cvmx-fpa-defs.h>
 
 #define CVMX_FPA_NUM_POOLS      8
 #define CVMX_FPA_MIN_BLOCK_SIZE 128
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h
index 88527fa835c9..442f508eaac9 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-board.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@@ -34,7 +34,7 @@
 #ifndef __CVMX_HELPER_BOARD_H__
 #define __CVMX_HELPER_BOARD_H__
 
-#include "cvmx-helper.h"
+#include <asm/octeon/cvmx-helper.h>
 
 typedef enum {
 	set_phy_link_flags_autoneg = 0x1,
diff --git a/arch/mips/include/asm/octeon/cvmx-helper.h b/arch/mips/include/asm/octeon/cvmx-helper.h
index 0ac6b9f412be..691c8142cd4f 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper.h
@@ -34,9 +34,9 @@
 #ifndef __CVMX_HELPER_H__
 #define __CVMX_HELPER_H__
 
-#include "cvmx-config.h"
-#include "cvmx-fpa.h"
-#include "cvmx-wqe.h"
+#include <asm/octeon/cvmx-config.h>
+#include <asm/octeon/cvmx-fpa.h>
+#include <asm/octeon/cvmx-wqe.h>
 
 typedef enum {
 	CVMX_HELPER_INTERFACE_MODE_DISABLED,
@@ -62,13 +62,13 @@ typedef union {
 } cvmx_helper_link_info_t;
 
 #include <asm/octeon/cvmx-helper-errata.h>
-#include "cvmx-helper-loop.h"
-#include "cvmx-helper-npi.h"
-#include "cvmx-helper-rgmii.h"
-#include "cvmx-helper-sgmii.h"
-#include "cvmx-helper-spi.h"
-#include "cvmx-helper-util.h"
-#include "cvmx-helper-xaui.h"
+#include <asm/octeon/cvmx-helper-loop.h>
+#include <asm/octeon/cvmx-helper-npi.h>
+#include <asm/octeon/cvmx-helper-rgmii.h>
+#include <asm/octeon/cvmx-helper-sgmii.h>
+#include <asm/octeon/cvmx-helper-spi.h>
+#include <asm/octeon/cvmx-helper-util.h>
+#include <asm/octeon/cvmx-helper-xaui.h>
 
 /**
  * cvmx_override_pko_queue_priority(int ipd_port, uint64_t
diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h
index d88ab8d8e37d..6f0cd182cec8 100644
--- a/arch/mips/include/asm/octeon/cvmx-mdio.h
+++ b/arch/mips/include/asm/octeon/cvmx-mdio.h
@@ -35,7 +35,7 @@
 #ifndef __CVMX_MIO_H__
 #define __CVMX_MIO_H__
 
-#include "cvmx-smix-defs.h"
+#include <asm/octeon/cvmx-smix-defs.h>
 
 /**
  * PHY register 0 from the 802.3 spec
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index 78dbce8f2c5e..9e739a640855 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -33,9 +33,9 @@
 #ifndef __CVMX_PIP_H__
 #define __CVMX_PIP_H__
 
-#include "cvmx-wqe.h"
-#include "cvmx-fpa.h"
-#include "cvmx-pip-defs.h"
+#include <asm/octeon/cvmx-wqe.h>
+#include <asm/octeon/cvmx-fpa.h>
+#include <asm/octeon/cvmx-pip-defs.h>
 
 #define CVMX_PIP_NUM_INPUT_PORTS                40
 #define CVMX_PIP_NUM_WATCHERS                   4
diff --git a/arch/mips/include/asm/octeon/cvmx-pko.h b/arch/mips/include/asm/octeon/cvmx-pko.h
index de3412aada5d..c6daeedf1f81 100644
--- a/arch/mips/include/asm/octeon/cvmx-pko.h
+++ b/arch/mips/include/asm/octeon/cvmx-pko.h
@@ -58,10 +58,10 @@
 #ifndef __CVMX_PKO_H__
 #define __CVMX_PKO_H__
 
-#include "cvmx-fpa.h"
-#include "cvmx-pow.h"
-#include "cvmx-cmd-queue.h"
-#include "cvmx-pko-defs.h"
+#include <asm/octeon/cvmx-fpa.h>
+#include <asm/octeon/cvmx-pow.h>
+#include <asm/octeon/cvmx-cmd-queue.h>
+#include <asm/octeon/cvmx-pko-defs.h>
 
 /* Adjust the command buffer size by 1 word so that in the case of using only
  * two word PKO commands no command words stradle buffers.  The useful values
diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h
index 999aefe3274c..92742b241a51 100644
--- a/arch/mips/include/asm/octeon/cvmx-pow.h
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -53,8 +53,8 @@
 
 #include <asm/octeon/cvmx-pow-defs.h>
 
-#include "cvmx-scratch.h"
-#include "cvmx-wqe.h"
+#include <asm/octeon/cvmx-scratch.h>
+#include <asm/octeon/cvmx-wqe.h>
 
 /* Default to having all POW constancy checks turned on */
 #ifndef CVMX_ENABLE_POW_CHECKS
diff --git a/arch/mips/include/asm/octeon/cvmx-spi.h b/arch/mips/include/asm/octeon/cvmx-spi.h
index e814648953a5..3bf53b537bcf 100644
--- a/arch/mips/include/asm/octeon/cvmx-spi.h
+++ b/arch/mips/include/asm/octeon/cvmx-spi.h
@@ -32,7 +32,7 @@
 #ifndef __CVMX_SPI_H__
 #define __CVMX_SPI_H__
 
-#include "cvmx-gmxx-defs.h"
+#include <asm/octeon/cvmx-gmxx-defs.h>
 
 /* CSR typedefs have been moved to cvmx-csr-*.h */
 
diff --git a/arch/mips/include/asm/octeon/cvmx-spinlock.h b/arch/mips/include/asm/octeon/cvmx-spinlock.h
index 2fbf0871df11..a672abb1bc4f 100644
--- a/arch/mips/include/asm/octeon/cvmx-spinlock.h
+++ b/arch/mips/include/asm/octeon/cvmx-spinlock.h
@@ -35,7 +35,7 @@
 #ifndef __CVMX_SPINLOCK_H__
 #define __CVMX_SPINLOCK_H__
 
-#include "cvmx-asm.h"
+#include <asm/octeon/cvmx-asm.h>
 
 /* Spinlocks for Octeon */
 
diff --git a/arch/mips/include/asm/octeon/cvmx-wqe.h b/arch/mips/include/asm/octeon/cvmx-wqe.h
index 653610953d28..df762389e271 100644
--- a/arch/mips/include/asm/octeon/cvmx-wqe.h
+++ b/arch/mips/include/asm/octeon/cvmx-wqe.h
@@ -40,7 +40,7 @@
 #ifndef __CVMX_WQE_H__
 #define __CVMX_WQE_H__
 
-#include "cvmx-packet.h"
+#include <asm/octeon/cvmx-packet.h>
 
 
 #define OCT_TAG_TYPE_STRING(x)						\
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index 740be97a3251..db58beab6cb2 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -52,24 +52,24 @@ enum cvmx_mips_space {
 #define CVMX_ADD_IO_SEG(add) CVMX_ADD_SEG(CVMX_IO_SEG, (add))
 #endif
 
-#include "cvmx-asm.h"
-#include "cvmx-packet.h"
-#include "cvmx-sysinfo.h"
-
-#include "cvmx-ciu-defs.h"
-#include "cvmx-gpio-defs.h"
-#include "cvmx-iob-defs.h"
-#include "cvmx-ipd-defs.h"
-#include "cvmx-l2c-defs.h"
-#include "cvmx-l2d-defs.h"
-#include "cvmx-l2t-defs.h"
-#include "cvmx-led-defs.h"
-#include "cvmx-mio-defs.h"
-#include "cvmx-pow-defs.h"
-
-#include "cvmx-bootinfo.h"
-#include "cvmx-bootmem.h"
-#include "cvmx-l2c.h"
+#include <asm/octeon/cvmx-asm.h>
+#include <asm/octeon/cvmx-packet.h>
+#include <asm/octeon/cvmx-sysinfo.h>
+
+#include <asm/octeon/cvmx-ciu-defs.h>
+#include <asm/octeon/cvmx-gpio-defs.h>
+#include <asm/octeon/cvmx-iob-defs.h>
+#include <asm/octeon/cvmx-ipd-defs.h>
+#include <asm/octeon/cvmx-l2c-defs.h>
+#include <asm/octeon/cvmx-l2d-defs.h>
+#include <asm/octeon/cvmx-l2t-defs.h>
+#include <asm/octeon/cvmx-led-defs.h>
+#include <asm/octeon/cvmx-mio-defs.h>
+#include <asm/octeon/cvmx-pow-defs.h>
+
+#include <asm/octeon/cvmx-bootinfo.h>
+#include <asm/octeon/cvmx-bootmem.h>
+#include <asm/octeon/cvmx-l2c.h>
 
 #ifndef CVMX_ENABLE_DEBUG_PRINTS
 #define CVMX_ENABLE_DEBUG_PRINTS 1
diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
index 4e338a4d9424..23b895cb260b 100644
--- a/arch/mips/include/asm/octeon/octeon-model.h
+++ b/arch/mips/include/asm/octeon/octeon-model.h
@@ -313,6 +313,6 @@ static inline int __octeon_is_model_runtime__(uint32_t model)
 const char *octeon_model_get_string(uint32_t chip_id);
 const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer);
 
-#include "octeon-feature.h"
+#include <asm/octeon/octeon-feature.h>
 
 #endif /* __OCTEON_MODEL_H__ */
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index 1e2486e23573..c4a1b31966bb 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_OCTEON_OCTEON_H
 #define __ASM_OCTEON_OCTEON_H
 
-#include "cvmx.h"
+#include <asm/octeon/cvmx.h>
 
 extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
 						uint64_t alignment,
diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h
index a37d12b3b61c..afe9e0e03fe9 100644
--- a/arch/mips/include/asm/r4k-timer.h
+++ b/arch/mips/include/asm/r4k-timer.h
@@ -12,16 +12,16 @@
 
 #ifdef CONFIG_SYNC_R4K
 
-extern void synchronise_count_master(void);
-extern void synchronise_count_slave(void);
+extern void synchronise_count_master(int cpu);
+extern void synchronise_count_slave(int cpu);
 
 #else
 
-static inline void synchronise_count_master(void)
+static inline void synchronise_count_master(int cpu)
 {
 }
 
-static inline void synchronise_count_slave(void)
+static inline void synchronise_count_slave(int cpu)
 {
 }
 
diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h
index 6109557c14e9..fffb224d2297 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_int.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_int.h
@@ -34,7 +34,7 @@
 #ifndef _BCM1480_INT_H
 #define _BCM1480_INT_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  Interrupt Mapper Constants
diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
index fd75817f7ac4..725d38cb9d1c 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_l2c.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
@@ -33,7 +33,7 @@
 #ifndef _BCM1480_L2C_H
 #define _BCM1480_L2C_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * Format of level 2 cache management address (Table 55)
diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h
index f26a41a82b59..4307a758e3bf 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_mc.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h
@@ -33,7 +33,7 @@
 #ifndef _BCM1480_MC_H
 #define _BCM1480_MC_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * Memory Channel Configuration Register (Table 81)
diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h
index b4077bb72611..84d168ddfebb 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_regs.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h
@@ -32,14 +32,14 @@
 #ifndef _BCM1480_REGS_H
 #define _BCM1480_REGS_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  Pull in the BCM1250's registers since a great deal of the 1480's
     *  functions are the same as the BCM1250.
     ********************************************************************* */
 
-#include "sb1250_regs.h"
+#include <asm/sibyte/sb1250_regs.h>
 
 
 /*  *********************************************************************
diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h
index 25ef24cbb92a..2af3706b9648 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_scd.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h
@@ -32,13 +32,13 @@
 #ifndef _BCM1480_SCD_H
 #define _BCM1480_SCD_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  Pull in the BCM1250's SCD since lots of stuff is the same.
     ********************************************************************* */
 
-#include "sb1250_scd.h"
+#include <asm/sibyte/sb1250_scd.h>
 
 /*  *********************************************************************
     *  Some general notes:
diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h
index bad56171d747..6c44dfb52878 100644
--- a/arch/mips/include/asm/sibyte/sb1250_dma.h
+++ b/arch/mips/include/asm/sibyte/sb1250_dma.h
@@ -36,7 +36,7 @@
 #define _SB1250_DMA_H
 
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  DMA Registers
diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h
index 94e9c7c8e783..a96ded17bdc9 100644
--- a/arch/mips/include/asm/sibyte/sb1250_genbus.h
+++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h
@@ -34,7 +34,7 @@
 #ifndef _SB1250_GENBUS_H
 #define _SB1250_GENBUS_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * Generic Bus Region Configuration Registers (Table 11-4)
diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h
index f2850b4bcfd4..dbea73ddd2fe 100644
--- a/arch/mips/include/asm/sibyte/sb1250_int.h
+++ b/arch/mips/include/asm/sibyte/sb1250_int.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_INT_H
 #define _SB1250_INT_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  Interrupt Mapper Constants
diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h
index 6554dcf05cfe..b61a7491607d 100644
--- a/arch/mips/include/asm/sibyte/sb1250_l2c.h
+++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_L2C_H
 #define _SB1250_L2C_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * Level 2 Cache Tag register (Table 5-3)
diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h
index 1e76cf137995..bf7f320d1a87 100644
--- a/arch/mips/include/asm/sibyte/sb1250_ldt.h
+++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_LDT_H
 #define _SB1250_LDT_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 #define K_LDT_VENDOR_SIBYTE	0x166D
 #define K_LDT_DEVICE_SB1250	0x0002
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index 77f787284235..cfc4d7870882 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_MAC_H
 #define _SB1250_MAC_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  Ethernet MAC Registers
diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h
index 1eb1b5a88736..15048dcaf22f 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mc.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mc.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_MC_H
 #define _SB1250_MC_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * Memory Channel Config Register (table 6-14)
diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h
index 8f53ec817a5e..29b9f0b26b3a 100644
--- a/arch/mips/include/asm/sibyte/sb1250_regs.h
+++ b/arch/mips/include/asm/sibyte/sb1250_regs.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_REGS_H
 #define _SB1250_REGS_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 
 /*  *********************************************************************
diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h
index e49c3e89b5ee..615e165dbd21 100644
--- a/arch/mips/include/asm/sibyte/sb1250_scd.h
+++ b/arch/mips/include/asm/sibyte/sb1250_scd.h
@@ -32,7 +32,7 @@
 #ifndef _SB1250_SCD_H
 #define _SB1250_SCD_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*  *********************************************************************
     *  System control/debug registers
diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h
index 04769923cf1e..128d6b75b819 100644
--- a/arch/mips/include/asm/sibyte/sb1250_smbus.h
+++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h
@@ -34,7 +34,7 @@
 #ifndef _SB1250_SMBUS_H
 #define _SB1250_SMBUS_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * SMBus Clock Frequency Register (Table 14-2)
diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h
index d4b8558e0bf1..274e9179d326 100644
--- a/arch/mips/include/asm/sibyte/sb1250_syncser.h
+++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_SYNCSER_H
 #define _SB1250_SYNCSER_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /*
  * Serial Mode Configuration Register
diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h
index d835bf280140..bb99ecac5817 100644
--- a/arch/mips/include/asm/sibyte/sb1250_uart.h
+++ b/arch/mips/include/asm/sibyte/sb1250_uart.h
@@ -33,7 +33,7 @@
 #ifndef _SB1250_UART_H
 #define _SB1250_UART_H
 
-#include "sb1250_defs.h"
+#include <asm/sibyte/sb1250_defs.h>
 
 /* **********************************************************************
    * DUART Registers
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index a5066b1c3de3..4f8c3cba8c0c 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -39,8 +39,6 @@ struct mips_hi16 {
 	Elf_Addr value;
 };
 
-static struct mips_hi16 *mips_hi16_list;
-
 static LIST_HEAD(dbe_list);
 static DEFINE_SPINLOCK(dbe_lock);
 
@@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
 
 	n->addr = (Elf_Addr *)location;
 	n->value = v;
-	n->next = mips_hi16_list;
-	mips_hi16_list = n;
+	n->next = me->arch.r_mips_hi16_list;
+	me->arch.r_mips_hi16_list = n;
 
 	return 0;
 }
@@ -142,18 +140,28 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
 	return 0;
 }
 
+static void free_relocation_chain(struct mips_hi16 *l)
+{
+	struct mips_hi16 *next;
+
+	while (l) {
+		next = l->next;
+		kfree(l);
+		l = next;
+	}
+}
+
 static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 {
 	unsigned long insnlo = *location;
+	struct mips_hi16 *l;
 	Elf_Addr val, vallo;
 
 	/* Sign extend the addend we extract from the lo insn.  */
 	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
 
-	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
-
-		l = mips_hi16_list;
+	if (me->arch.r_mips_hi16_list != NULL) {
+		l = me->arch.r_mips_hi16_list;
 		while (l != NULL) {
 			struct mips_hi16 *next;
 			unsigned long insn;
@@ -188,7 +196,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 			l = next;
 		}
 
-		mips_hi16_list = NULL;
+		me->arch.r_mips_hi16_list = NULL;
 	}
 
 	/*
@@ -201,6 +209,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 	return 0;
 
 out_danger:
+	free_relocation_chain(l);
+	me->arch.r_mips_hi16_list = NULL;
+
 	pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
 
 	return -ENOEXEC;
@@ -273,6 +284,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 	pr_debug("Applying relocate section %u to %u\n", relsec,
 	       sechdrs[relsec].sh_info);
 
+	me->arch.r_mips_hi16_list = NULL;
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
 		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -296,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 			return res;
 	}
 
+	/*
+	 * Normally the hi16 list should be deallocated at this point.  A
+	 * malformed binary however could contain a series of R_MIPS_HI16
+	 * relocations not followed by a R_MIPS_LO16 relocation.  In that
+	 * case, free up the list and return an error.
+	 */
+	if (me->arch.r_mips_hi16_list) {
+		free_relocation_chain(me->arch.r_mips_hi16_list);
+		me->arch.r_mips_hi16_list = NULL;
+
+		return -ENOEXEC;
+	}
+
 	return 0;
 }
 
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index e7e03ecf5495..afc379ca3753 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -102,7 +102,7 @@ static void cmp_init_secondary(void)
 	c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
-	c->tc_id  = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC;
+	c->tc_id  = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
 #endif
 }
 
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 31637d8c8738..9005bf9fb859 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void)
 
 	cpu_set(cpu, cpu_callin_map);
 
-	synchronise_count_slave();
+	synchronise_count_slave(cpu);
 
 	/*
 	 * irq will be enabled in ->smp_finish(), enabling it too early
@@ -173,7 +173,6 @@ void smp_send_stop(void)
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	mp_ops->cpus_done();
-	synchronise_count_master();
 }
 
 /* called from main before smp_init() */
@@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	while (!cpu_isset(cpu, cpu_callin_map))
 		udelay(100);
 
+	synchronise_count_master(cpu);
 	return 0;
 }
 
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 842d55e411fd..7f1eca3858de 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 #define COUNTON	100
 #define NR_LOOPS 5
 
-void __cpuinit synchronise_count_master(void)
+void __cpuinit synchronise_count_master(int cpu)
 {
 	int i;
 	unsigned long flags;
 	unsigned int initcount;
-	int nslaves;
 
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
@@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void)
 	return;
 #endif
 
-	printk(KERN_INFO "Synchronize counters across %u CPUs: ",
-	       num_online_cpus());
+	printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
 
 	local_irq_save(flags);
 
@@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void)
 	 * Notify the slaves that it's time to start
 	 */
 	atomic_set(&count_reference, read_c0_count());
-	atomic_set(&count_start_flag, 1);
+	atomic_set(&count_start_flag, cpu);
 	smp_wmb();
 
 	/* Count will be initialised to current timer for all CPU's */
@@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void)
 	 * two CPUs.
 	 */
 
-	nslaves = num_online_cpus()-1;
 	for (i = 0; i < NR_LOOPS; i++) {
-		/* slaves loop on '!= ncpus' */
-		while (atomic_read(&count_count_start) != nslaves)
+		/* slaves loop on '!= 2' */
+		while (atomic_read(&count_count_start) != 1)
 			mb();
 		atomic_set(&count_count_stop, 0);
 		smp_wmb();
@@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void)
 		/*
 		 * Wait for all slaves to leave the synchronization point:
 		 */
-		while (atomic_read(&count_count_stop) != nslaves)
+		while (atomic_read(&count_count_stop) != 1)
 			mb();
 		atomic_set(&count_count_start, 0);
 		smp_wmb();
@@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void)
 	}
 	/* Arrange for an interrupt in a short while */
 	write_c0_compare(read_c0_count() + COUNTON);
+	atomic_set(&count_start_flag, 0);
 
 	local_irq_restore(flags);
 
@@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void)
 	printk("done.\n");
 }
 
-void __cpuinit synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(int cpu)
 {
 	int i;
 	unsigned int initcount;
-	int ncpus;
 
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
@@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void)
 	 * so we first wait for the master to say everyone is ready
 	 */
 
-	while (!atomic_read(&count_start_flag))
+	while (atomic_read(&count_start_flag) != cpu)
 		mb();
 
 	/* Count will be initialised to next expire for all CPU's */
 	initcount = atomic_read(&count_reference);
 
-	ncpus = num_online_cpus();
 	for (i = 0; i < NR_LOOPS; i++) {
 		atomic_inc(&count_count_start);
-		while (atomic_read(&count_count_start) != ncpus)
+		while (atomic_read(&count_count_start) != 2)
 			mb();
 
 		/*
@@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void)
 			write_c0_count(initcount);
 
 		atomic_inc(&count_count_stop);
-		while (atomic_read(&count_count_stop) != ncpus)
+		while (atomic_read(&count_count_stop) != 2)
 			mb();
 	}
 	/* Arrange for an interrupt in a short while */
diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c
index 33aadbcf170b..dcfd573871c1 100644
--- a/arch/mips/mm/gup.c
+++ b/arch/mips/mm/gup.c
@@ -152,6 +152,8 @@ static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end,
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
+		if (PageTail(page))
+			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 7b13a4caeea4..fea823f18479 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -273,16 +273,19 @@ asmlinkage void plat_irq_dispatch(void)
 	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
 	int irq;
 
+	if (unlikely(!pending)) {
+		spurious_interrupt();
+		return;
+	}
+
 	irq = irq_ffs(pending);
 
 	if (irq == MIPSCPU_INT_I8259A)
 		malta_hw0_irqdispatch();
 	else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
 		malta_ipi_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
 	else
-		spurious_interrupt();
+		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
 }
 
 #ifdef CONFIG_MIPS_MT_SMP
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 284dea54faf5..2147cb34e705 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -252,16 +252,3 @@ void __init mips_pcibios_init(void)
 
 	register_pci_controller(controller);
 }
-
-/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __devinit quirk_dlcsetup(struct pci_dev *dev)
-{
-	u8 odlc, ndlc;
-	(void) pci_read_config_byte(dev, 0x82, &odlc);
-	/* Enable passive releases and delayed transaction */
-	ndlc = odlc | 7;
-	(void) pci_write_config_byte(dev, 0x82, ndlc);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
-	quirk_dlcsetup);
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 4c35301720e7..80562b81f0f2 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -138,11 +138,6 @@ static int __init malta_add_devices(void)
 	if (err)
 		return err;
 
-	/*
-	 * Set RTC to BCD mode to support current alarm code.
-	 */
-	CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
-
 	return 0;
 }
 
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 414a7459858d..86d77a666458 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -23,9 +23,12 @@
 #define AR724X_PCI_MEM_BASE	0x10000000
 #define AR724X_PCI_MEM_SIZE	0x08000000
 
+#define AR724X_PCI_REG_RESET		0x18
 #define AR724X_PCI_REG_INT_STATUS	0x4c
 #define AR724X_PCI_REG_INT_MASK		0x50
 
+#define AR724X_PCI_RESET_LINK_UP	BIT(0)
+
 #define AR724X_PCI_INT_DEV0		BIT(14)
 
 #define AR724X_PCI_IRQ_COUNT		1
@@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base;
 
 static u32 ar724x_pci_bar0_value;
 static bool ar724x_pci_bar0_is_cached;
+static bool ar724x_pci_link_up;
+
+static inline bool ar724x_pci_check_link(void)
+{
+	u32 reset;
+
+	reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
+	return reset & AR724X_PCI_RESET_LINK_UP;
+}
 
 static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 			    int size, uint32_t *value)
@@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 	void __iomem *base;
 	u32 data;
 
+	if (!ar724x_pci_link_up)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	if (devfn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 	u32 data;
 	int s;
 
+	if (!ar724x_pci_link_up)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	if (devfn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq)
 	if (ar724x_pci_ctrl_base == NULL)
 		goto err_unmap_devcfg;
 
+	ar724x_pci_link_up = ar724x_pci_check_link();
+	if (!ar724x_pci_link_up)
+		pr_warn("ar724x: PCIe link is down\n");
+
 	ar724x_pci_irq_init(irq);
 	register_pci_controller(&ar724x_pci_controller);
 
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 52a1ba70b3b6..4b0c347d7a82 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -58,7 +58,7 @@ union octeon_pci_address {
 	} s;
 };
 
-int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+int __initconst (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
 					 u8 slot, u8 pin);
 enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
 
@@ -117,16 +117,11 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	}
 
 	/* Enable the PCIe normal error reporting */
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-	if (pos) {
-		/* Update Device Control */
-		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-		config |= PCI_EXP_DEVCTL_CERE; /* Correctable Error Reporting */
-		config |= PCI_EXP_DEVCTL_NFERE; /* Non-Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_FERE;  /* Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_URRE;  /* Unsupported Request */
-		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-	}
+	config = PCI_EXP_DEVCTL_CERE; /* Correctable Error Reporting */
+	config |= PCI_EXP_DEVCTL_NFERE; /* Non-Fatal Error Reporting */
+	config |= PCI_EXP_DEVCTL_FERE;  /* Fatal Error Reporting */
+	config |= PCI_EXP_DEVCTL_URRE;  /* Unsupported Request */
+	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, config);
 
 	/* Find the Advanced Error Reporting capability */
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 690356808f8a..04e35bcde07c 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -313,12 +313,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 	}
 }
 
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 #ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index c48194c3073b..b2d4f492d782 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -133,6 +133,38 @@ static struct platform_device sc26xx_pdev = {
 	}
 };
 
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+	 "in the linux-serial mailing list."
+
+/* The code bellow is a replacement of SC26XX to SCCNXP */
+#if 0
+#include <linux/platform_data/sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+	.reg_shift	= 2,
+	.frequency	= 3686400,
+	.mctrl_cfg[0]	= MCTRL_SIG(DTR_OP, LINE_OP7) |
+			  MCTRL_SIG(RTS_OP, LINE_OP3) |
+			  MCTRL_SIG(DSR_IP, LINE_IP5) |
+			  MCTRL_SIG(DCD_IP, LINE_IP6),
+	.mctrl_cfg[1]	= MCTRL_SIG(DTR_OP, LINE_OP2) |
+			  MCTRL_SIG(RTS_OP, LINE_OP1) |
+			  MCTRL_SIG(DSR_IP, LINE_IP0) |
+			  MCTRL_SIG(CTS_IP, LINE_IP1) |
+			  MCTRL_SIG(DCD_IP, LINE_IP2) |
+			  MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
+static struct platform_device sc2681_pdev = {
+	.name		= "sc2681",
+	.resource	= sc2xxx_rsrc,
+	.num_resources	= ARRAY_SIZE(sc2xxx_rsrc),
+	.dev	= {
+		.platform_data	= &sccnxp_data,
+	},
+};
+#endif
+
 static u32 a20r_ack_hwint(void)
 {
 	u32 status = read_c0_status();
diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
index 33188b6e81e4..a3d0fef3b126 100644
--- a/arch/mn10300/Makefile
+++ b/arch/mn10300/Makefile
@@ -26,7 +26,7 @@ CHECKFLAGS	+=
 PROCESSOR	:= unset
 UNIT		:= unset
 
-KBUILD_CFLAGS	+= -mam33 -mmem-funcs -DCPU=AM33
+KBUILD_CFLAGS	+= -mam33 -DCPU=AM33 $(call cc-option,-mmem-funcs,)
 KBUILD_AFLAGS	+= -mam33 -DCPU=AM33
 
 ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y)
diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h
index 8157c9267f42..4ebd6b3a0a1e 100644
--- a/arch/mn10300/include/asm/elf.h
+++ b/arch/mn10300/include/asm/elf.h
@@ -151,7 +151,8 @@ do {						\
 #define ELF_PLATFORM  (NULL)
 
 #ifdef __KERNEL__
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #endif
 
 #endif /* _ASM_ELF_H */
diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 7dab0cd36466..e9cceba193b6 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
@@ -107,6 +108,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	for (;;) {
+		rcu_idle_enter();
 		while (!need_resched()) {
 			void (*idle)(void);
 
@@ -121,6 +123,7 @@ void cpu_idle(void)
 			}
 			idle();
 		}
+		rcu_idle_exit();
 
 		schedule_preempt_disabled();
 	}
diff --git a/arch/openrisc/include/asm/elf.h b/arch/openrisc/include/asm/elf.h
index a8fe2c513070..225a7ff320ad 100644
--- a/arch/openrisc/include/asm/elf.h
+++ b/arch/openrisc/include/asm/elf.h
@@ -110,7 +110,8 @@ extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt);
 
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/openrisc/include/asm/unistd.h b/arch/openrisc/include/asm/unistd.h
index 89af3ab5c2e9..437bdbb61b14 100644
--- a/arch/openrisc/include/asm/unistd.h
+++ b/arch/openrisc/include/asm/unistd.h
@@ -16,9 +16,6 @@
  * (at your option) any later version.
  */
 
-#if !defined(__ASM_OPENRISC_UNISTD_H) || defined(__SYSCALL)
-#define __ASM_OPENRISC_UNISTD_H
-
 #define __ARCH_HAVE_MMU
 
 #define sys_mmap2 sys_mmap_pgoff
@@ -27,5 +24,3 @@
 
 #define __NR_or1k_atomic __NR_arch_specific_syscall
 __SYSCALL(__NR_or1k_atomic, sys_or1k_atomic)
-
-#endif /* __ASM_OPENRISC_UNISTD_H */
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 3ff21b536f28..b87438bb3384 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -13,6 +13,7 @@ config PARISC
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
 	select HAVE_GENERIC_HARDIRQS
+	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
 	select IRQ_PER_CPU
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index c71eb6c79897..6785de7bd2a0 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -109,33 +109,32 @@ Efault:
 
 int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned int count)
 {
-	struct file * file;
+	struct fd arg;
 	struct hpux_dirent __user * lastdirent;
 	struct getdents_callback buf;
-	int error = -EBADF;
+	int error;
 
-	file = fget(fd);
-	if (!file)
-		goto out;
+	arg = fdget(fd);
+	if (!arg.file)
+		return -EBADF;
 
 	buf.current_dir = dirent;
 	buf.previous = NULL;
 	buf.count = count;
 	buf.error = 0;
 
-	error = vfs_readdir(file, filldir, &buf);
+	error = vfs_readdir(arg.file, filldir, &buf);
 	if (error >= 0)
 		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
+		if (put_user(arg.file->f_pos, &lastdirent->d_off))
 			error = -EFAULT;
 		else
 			error = count - buf.count;
 	}
 
-	fput(file);
-out:
+	fdput(arg);
 	return error;
 }
 
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 6c6defc24619..af9cf30ed474 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_sub_and_test(i,v)	(atomic_sub_return((i),(v)) == 0)
 
-#define ATOMIC_INIT(i)	((atomic_t) { (i) })
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
@@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifdef CONFIG_64BIT
 
-#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+#define ATOMIC64_INIT(i) { (i) }
 
 static __inline__ s64
 __atomic64_add_return(s64 i, atomic64_t *v)
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index 760f331d4fa3..db7a662691a8 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -36,6 +36,7 @@ typedef s64	compat_s64;
 typedef u32	compat_uint_t;
 typedef u32	compat_ulong_t;
 typedef u64	compat_u64;
+typedef u32	compat_uptr_t;
 
 struct compat_timespec {
 	compat_time_t		tv_sec;
@@ -127,6 +128,63 @@ typedef u32		compat_old_sigset_t;	/* at least 32 bits */
 
 typedef u32		compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[128/sizeof(int) - 3];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;      /* sender's pid */
+			unsigned int _uid;      /* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;            /* timer id */
+			int _overrun;           /* overrun count */
+			char _pad[sizeof(unsigned int) - sizeof(int)];
+			compat_sigval_t _sigval;        /* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;      /* sender's pid */
+			unsigned int _uid;      /* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;      /* which child */
+			unsigned int _uid;      /* sender's uid */
+			int _status;            /* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;     /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;      /* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
@@ -136,7 +194,6 @@ typedef u32		compat_sigset_word;
  * as pointers because the syscall entry code will have
  * appropriately converted them already.
  */
-typedef	u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/parisc/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 47341aa208f2..88238638aee6 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -202,6 +202,7 @@ static int __init pdc_console_tty_driver_init(void)
 	pdc_console_tty_driver->flags = TTY_DRIVER_REAL_RAW |
 		TTY_DRIVER_RESET_TERMIOS;
 	tty_set_operations(pdc_console_tty_driver, &pdc_console_tty_ops);
+	tty_port_link_device(&tty_port, pdc_console_tty_driver, 0);
 
 	err = tty_register_driver(pdc_console_tty_driver);
 	if (err) {
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index d4b94b395c16..8c6b6b6561f0 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -48,6 +48,7 @@
 #include <linux/unistd.h>
 #include <linux/kallsyms.h>
 #include <linux/uaccess.h>
+#include <linux/rcupdate.h>
 
 #include <asm/io.h>
 #include <asm/asm-offsets.h>
@@ -69,8 +70,10 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched())
 			barrier();
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 		check_pgt_cache();
 	}
@@ -309,7 +312,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 		cregs->ksp = (unsigned long)stack
 			+ (pregs->gr[21] & (THREAD_SIZE - 1));
 		cregs->gr[30] = usp;
-		if (p->personality == PER_HPUX) {
+		if (personality(p->personality) == PER_HPUX) {
 #ifdef CONFIG_HPUX
 			cregs->kpc = (unsigned long) &hpux_child_return;
 #else
diff --git a/arch/parisc/kernel/signal32.h b/arch/parisc/kernel/signal32.h
index c7800846422c..08a88b5349a2 100644
--- a/arch/parisc/kernel/signal32.h
+++ b/arch/parisc/kernel/signal32.h
@@ -55,58 +55,6 @@ struct k_sigaction32 {
 	struct compat_sigaction sa;
 };
 
-typedef struct compat_siginfo {
-        int si_signo;
-        int si_errno;
-        int si_code;
-
-        union {
-                int _pad[((128/sizeof(int)) - 3)];
-
-                /* kill() */
-                struct {
-                        unsigned int _pid;      /* sender's pid */
-                        unsigned int _uid;      /* sender's uid */
-                } _kill;
-
-                /* POSIX.1b timers */
-                struct {
-                        compat_timer_t _tid;            /* timer id */
-                        int _overrun;           /* overrun count */
-                        char _pad[sizeof(unsigned int) - sizeof(int)];
-                        compat_sigval_t _sigval;        /* same as below */
-                        int _sys_private;       /* not to be passed to user */
-                } _timer;
-
-                /* POSIX.1b signals */
-                struct {
-                        unsigned int _pid;      /* sender's pid */
-                        unsigned int _uid;      /* sender's uid */
-                        compat_sigval_t _sigval;
-                } _rt;
-
-                /* SIGCHLD */
-                struct {
-                        unsigned int _pid;      /* which child */
-                        unsigned int _uid;      /* sender's uid */
-                        int _status;            /* exit code */
-                        compat_clock_t _utime;
-                        compat_clock_t _stime;
-                } _sigchld;
-
-                /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-                struct {
-                        unsigned int _addr;     /* faulting insn/memory ref. */
-                } _sigfault;
-
-                /* SIGPOLL */
-                struct {
-                        int _band;      /* POLL_IN, POLL_OUT, POLL_MSG */
-                        int _fd;
-                } _sigpoll;
-        } _sifields;
-} compat_siginfo_t;
-
 int copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from);
 int copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from);
 
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index c9b932260f47..7426e40699bd 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality)
 	long err;
 
 	if (personality(current->personality) == PER_LINUX32
-	    && personality == PER_LINUX)
-		personality = PER_LINUX32;
+	    && personality(personality) == PER_LINUX)
+		personality = (personality & ~PER_MASK) | PER_LINUX32;
 
 	err = sys_personality(personality);
-	if (err == PER_LINUX32)
-		err = PER_LINUX;
+	if (personality(err) == PER_LINUX32)
+		err = (err & ~PER_MASK) | PER_LINUX;
 
 	return err;
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 352f416269ce..4ce0be32d153 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -215,7 +215,8 @@ config ARCH_HIBERNATION_POSSIBLE
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
-		   (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
+		   (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
+		   || 44x || 40x
 
 config PPC_DCR_NATIVE
 	bool
@@ -239,6 +240,9 @@ config PPC_OF_PLATFORM_PCI
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
 config PPC_ADV_DEBUG_REGS
 	bool
 	depends on 40x || BOOKE
@@ -325,7 +329,8 @@ config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
+	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
@@ -557,6 +562,14 @@ config SCHED_SMT
 	  when dealing with POWER5 cpus at a cost of slightly increased
 	  overhead in some places. If unsure say N here.
 
+config PPC_DENORMALISATION
+	bool "PowerPC denormalisation exception handling"
+	depends on PPC_BOOK3S_64
+	default "n"
+	---help---
+	  Add support for handling denormalisation of single precision
+	  values.  Useful for bare metal only.  If unsure say Y here.
+
 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"
 
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 1c1aadc8c48f..c32ae5ce9fff 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -1,10 +1,6 @@
 addnote
 empty.c
 hack-coff
-infblock.c
-infblock.h
-infcodes.c
-infcodes.h
 inffast.c
 inffast.h
 inffixed.h
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index b7d833382be4..6a15c968d214 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -107,6 +107,7 @@ src-boot := $(addprefix $(obj)/, $(src-boot))
 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
 obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
+obj-plat: $(libfdt)
 
 quiet_cmd_copy_zlib = COPY    $@
       cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
diff --git a/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
new file mode 100644
index 000000000000..870c6535a053
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
@@ -0,0 +1,58 @@
+/*
+ * e500mc Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi
new file mode 100644
index 000000000000..f4928144d2c8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi
@@ -0,0 +1,52 @@
+/*
+ * e500v2 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fd;	// SPE.Embedded Float Scalar Double
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
new file mode 100644
index 000000000000..3230212f7ad5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
@@ -0,0 +1,59 @@
+/*
+ * e5500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
index 7de45a784df6..152906f98a0f 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8536";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
index 8777f9239d9e..5a69bafb652a 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8544";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
index 720422d83529..fc1ce977422b 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8548";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
index eacd62c5fe6c..122ca3bd0b03 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8568";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
index b07064d11930..2cd15a2a0422 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8569";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
index ca188326c2ca..28c2a862be96 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8572";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
index 7354a8f90ea5..6e76f9b282a1 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1010";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
index 6f0376e554eb..fed9c4c8d962 100644
--- a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1020";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
index 4abd54bc3308..36161b500176 100644
--- a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1021";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
index e930f4f7ca89..1956dea040cc 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1022";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
index ac45f6d93385..132a1521921a 100644
--- a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1023";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
index 3213288641d1..42bf3c6d25ca 100644
--- a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P2020";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index 2d0a40d6b10f..7a2697d04549 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P2041";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index 136def3536b6..c9ca2c305cfe 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P3041";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 8d35d2c1f694..4f9c9f682ecf 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -345,6 +345,13 @@
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		port0;
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	};
 /include/ "qoriq-sec4.0-0.dtsi"
 };
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index b9556ee3a639..493d9a056b5c 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P4080";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index ae823a47584e..0a198b0a77e5 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P5020";
 	#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
new file mode 100644
index 000000000000..db2c9a7b3a0e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -0,0 +1,320 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+&lbc {
+	compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5040-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			phy_type = "utmi";
+			port0;
+		};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec5.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
new file mode 100644
index 000000000000..40ca943f5d1c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -0,0 +1,114 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P5040";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
new file mode 100644
index 000000000000..7b2ab8a8c1f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
@@ -0,0 +1,118 @@
+/*
+ * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.2-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
index d304a2d68c62..7c3dde84d193 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -132,6 +132,10 @@
 			reg = <0x68>;
 			interrupts = <0 0x1 0 0>;
 		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	spi@7000 {
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f99fb110c97f..2d31863accf5 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8540ADS";
 	compatible = "MPC8540ADS", "MPC85xxADS";
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 0f5e93912799..1c03c2667373 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8541CDS";
 	compatible = "MPC8541CDS", "MPC85xxCDS";
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index e934987e882b..ed38874c3a36 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -20,8 +20,10 @@
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	lbc: localbus@e0005000 {
+	board_lbc: lbc: localbus@e0005000 {
 		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
 	};
 
 	board_soc: soc: soc8544@e0000000 {
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
index 77ebc9f1d37c..b219d035d794 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dtsi
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -32,6 +32,45 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x800000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x10000>;
+			label = "dtb-nor";
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x30000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@400000 {
+			reg = <0x400000 0x380000>;
+			label = "kernel-nor";
+		};
+
+		partition@780000 {
+			reg = <0x780000 0x80000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+};
+
 &board_soc {
 	enet0: ethernet@24000 {
 		phy-handle = <&phy0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index fe10438613d6..36a7ea138c2f 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8555CDS";
 	compatible = "MPC8555CDS", "MPC85xxCDS";
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 6e85e1ba0851..1a43f5a968f5 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8560ADS";
 	compatible = "MPC8560ADS", "MPC85xxADS";
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
new file mode 100644
index 000000000000..9f6dd4d889b3
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -0,0 +1,47 @@
+/*
+ * O2D Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2d";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x08000000>;  // 128MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* o2d specific partitions */
+			partition@2c0000 {
+				label = "o2d user defined";
+				reg = <0x002c0000 0x01d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
new file mode 100644
index 000000000000..3444eb8f0ade
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -0,0 +1,139 @@
+/*
+ * O2D base Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+	model = "ifm,o2d";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+
+		gpio_simple: gpio@b00 {
+		};
+
+		timer@600 {	// General Purpose Timer
+			#gpio-cells = <2>;
+			gpio-controller;
+			fsl,has-wdt;
+			fsl,wdt-on-boot = <0>;
+		};
+
+		timer@610 {
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		timer7: timer@670 {
+		};
+
+		rtc@800 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+
+			spidev@0 {
+				compatible = "spidev";
+				spi-max-frequency = <250000>;
+				reg = <0>;
+			};
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		sclpc@3c00 {
+			compatible = "fsl,mpc5200-lpbfifo";
+			reg = <0x3c00 0x60>;
+			interrupts = <3 23 0>;
+		};
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x01000000
+			  3 0 0xe3000000 0x00100000>;
+
+		// flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			no-unaligned-direct-access;
+
+			/* common layout for all machines */
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+		};
+
+		csi@3,0 {
+			compatible = "ifm,o2d-csi";
+			reg = <3 0 0x00100000>;
+			ifm,csi-clk-handle = <&timer7>;
+			gpios = <&gpio_simple 23 0	/* imag_capture */
+				 &gpio_simple 26 0	/* imag_reset */
+				 &gpio_simple 29 0>;	/* imag_master_en */
+
+			interrupts = <1 1 2>;		/* IRQ1, edge falling */
+
+			ifm,csi-addr-bus-width = <24>;
+			ifm,csi-data-bus-width = <8>;
+			ifm,csi-wait-cycles = <0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2d300.dts b/arch/powerpc/boot/dts/o2d300.dts
new file mode 100644
index 000000000000..29affe0f0da3
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d300.dts
@@ -0,0 +1,52 @@
+/*
+ * O2D300 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2d300";
+	compatible = "ifm,o2d";
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@40000 {
+				label = "env_1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "env_2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "kernel";
+				reg = <0x00080000 0x00260000>;
+				read-only;
+			};
+			/* o2d300 specific partitions */
+			partition@2e0000 {
+				label = "o2d300 user defined";
+				reg = <0x002e0000 0x01d20000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
new file mode 100644
index 000000000000..a0f5b97a4f06
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -0,0 +1,48 @@
+/*
+ * O2DNT2 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2dnt2";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x08000000>;  // 128MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+
+			/* o2dnt2 specific partitions */
+			partition@2c0000 {
+				label = "o2dnt2 user defined";
+				reg = <0x002c0000 0x01d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2i.dts b/arch/powerpc/boot/dts/o2i.dts
new file mode 100644
index 000000000000..e3cc99d1360b
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2i.dts
@@ -0,0 +1,33 @@
+/*
+ * O2I Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2i";
+	compatible = "ifm,o2d";
+
+	localbus {
+		flash@0,0 {
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* o2i specific partitions */
+			partition@2c0000 {
+				label = "o2i user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2mnt.dts b/arch/powerpc/boot/dts/o2mnt.dts
new file mode 100644
index 000000000000..d91859a9e940
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2mnt.dts
@@ -0,0 +1,33 @@
+/*
+ * O2MNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2mnt";
+	compatible = "ifm,o2d";
+
+	localbus {
+		flash@0,0 {
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* add o2mnt specific partitions */
+			partition@2c0000 {
+				label = "o2mnt user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
new file mode 100644
index 000000000000..acce49326491
--- /dev/null
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -0,0 +1,48 @@
+/*
+ * O3DNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o3dnt";
+	compatible = "ifm,o2d";
+
+	memory {
+		reg = <0x00000000 0x04000000>;  // 64MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x01000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+
+			/* o3dnt specific partitions */
+			partition@2c0000 {
+				label = "o3dnt user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
deleted file mode 100644
index 41b4585c5da8..000000000000
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * P1020 RDB  Core0 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
- * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
- *
- * Please note to add "-b 0" for core0's dts compiling.
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p1020rdb.dts"
-
-/ {
-	model = "fsl,P1020RDB";
-	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	aliases {
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		PowerPC,P1020@1 {
-			status = "disabled";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		serial1: serial@4600 {
-			status = "disabled";
-		};
-
-		enet0: ethernet@b0000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			42 29 30 34	/* serial1, enet0-queue-group0 */
-			17 18 24 45	/* enet0-queue-group1, crypto */
-			>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
deleted file mode 100644
index 517453821884..000000000000
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * P1020 RDB Core1 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts allows core1 to have l2, eth0, crypto.
- *
- * Please note to add "-b 1" for core1's dts compiling.
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p1020rdb.dts"
-
-/ {
-	model = "fsl,P1020RDB";
-	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	aliases {
-		ethernet0 = &enet0;
-		serial0 = &serial1;
-		};
-
-	cpus {
-		PowerPC,P1020@0 {
-			status = "disabled";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		ecm-law@0 {
-			status = "disabled";
-		};
-
-		ecm@1000 {
-			status = "disabled";
-		};
-
-		memory-controller@2000 {
-			status = "disabled";
-		};
-
-		i2c@3000 {
-			status = "disabled";
-		};
-
-		i2c@3100 {
-			status = "disabled";
-		};
-
-		serial0: serial@4500 {
-			status = "disabled";
-		};
-
-		spi@7000 {
-			status = "disabled";
-		};
-
-		gpio: gpio-controller@f000 {
-			status = "disabled";
-		};
-
-		dma@21300 {
-			status = "disabled";
-		};
-
-		mdio@24000 {
-			status = "disabled";
-		};
-
-		mdio@25000 {
-			status = "disabled";
-		};
-
-		enet1: ethernet@b1000 {
-			status = "disabled";
-		};
-
-		enet2: ethernet@b2000 {
-			status = "disabled";
-		};
-
-		usb@22000 {
-			status = "disabled";
-		};
-
-		sdhci@2e000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			16 		/* ecm, mem, L2, pci0, pci1 */
-			43 42 59	/* i2c, serial0, spi */
-			47 63 62 	/* gpio, tdm */
-			20 21 22 23	/* dma */
-			03 02 		/* mdio */
-			35 36 40	/* enet1-queue-group0 */
-			51 52 67	/* enet1-queue-group1 */
-			31 32 33	/* enet2-queue-group0 */
-			25 26 27	/* enet2-queue-group1 */
-			28 72 58 	/* usb, sdhci, crypto */
-			0xb0 0xb1 0xb2	/* message */
-			0xb3 0xb4 0xb5
-			0xb6 0xb7
-			0xe0 0xe1 0xe2	/* msi */
-			0xe3 0xe4 0xe5
-			0xe6 0xe7		/* sdhci, crypto , pci */
-			>;
-		};
-
-		msi@41600 {
-			status = "disabled";
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			status = "disabled";
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe0a000 {
-		status = "disabled";
-	};
-};
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi
index c3344b04d8ff..873da350d01b 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/p1022ds.dtsi
@@ -149,6 +149,10 @@
 			compatible = "dallas,ds1339";
 			reg = <0x68>;
 		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	spi@7000 {
diff --git a/arch/powerpc/boot/dts/p1022rdk.dts b/arch/powerpc/boot/dts/p1022rdk.dts
new file mode 100644
index 000000000000..51d82de223f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1022rdk.dts
@@ -0,0 +1,188 @@
+/*
+ * P1022 RDK 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022RDK";
+	compatible = "fsl,P1022RDK";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		/* The P1022 RDK does not have any localbus devices */
+		status = "disabled";
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3100 {
+			wm8960:codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
+			adt7461@4c{
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+			zl6100@21{
+				compatible = "isil,zl6100";
+				reg = <0x21>;
+			};
+			zl6100@24{
+				compatible = "isil,zl6100";
+				reg = <0x24>;
+			};
+			zl6100@26{
+				compatible = "isil,zl6100";
+				reg = <0x26>;
+			};
+			zl6100@29{
+				compatible = "isil,zl6100";
+				reg = <0x29>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,m25p80";
+				reg = <0>;
+				spi-max-frequency = <1000000>;
+				partition@0 {
+					label = "full-spi-flash";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+		};
+
+		ssi@15000 {
+			fsl,mode = "i2s-slave";
+			codec-handle = <&wm8960>;
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <9 1 0 0>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ethernet@b0000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		ethernet@b1000 {
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
deleted file mode 100644
index 66aac864c4cc..000000000000
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * P2020 RDB  Core0 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
- * eth1, eth2, sdhc, crypto, global-util, pci0.
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p2020rdb.dts"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	cpus {
-		PowerPC,P2020@1 {
-			status = "disabled";
-		};
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		serial1: serial@4600 {
-			status = "disabled";
-		};
-
-		dma@c300 {
-			status = "disabled";
-		};
-
-		enet0: ethernet@24000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			42 76 77 78 79 /* serial1 , dma2 */
-			29 30 34 26 /* enet0, pci1 */
-			0xe0 0xe1 0xe2 0xe3 /* msi */
-			0xe4 0xe5 0xe6 0xe7
-			>;
-		};
-
-		msi@41600 {
-			status = "disabled";
-		};
-	};
-
-	pci0: pcie@ffe08000 {
-		status = "disabled";
-	};
-
-	pci2: pcie@ffe0a000 {
-		status = "disabled";
-	};
-};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
deleted file mode 100644
index 9bd8ef493dd2..000000000000
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * P2020 RDB Core1 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts allows core1 to have l2, dma2, eth0, pci1, msi.
- *
- * Please note to add "-b 1" for core1's dts compiling.
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p2020rdb.dts"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	cpus {
-		PowerPC,P2020@0 {
-			status = "disabled";
-		};
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		ecm-law@0 {
-			status = "disabled";
-		};
-
-		ecm@1000 {
-			status = "disabled";
-		};
-
-		memory-controller@2000 {
-			status = "disabled";
-		};
-
-		i2c@3000 {
-			status = "disabled";
-		};
-
-		i2c@3100 {
-			status = "disabled";
-		};
-
-		serial0: serial@4500 {
-			status = "disabled";
-		};
-
-		spi@7000 {
-			status = "disabled";
-		};
-
-		gpio: gpio-controller@f000 {
-			status = "disabled";
-		};
-
-		dma@21300 {
-			status = "disabled";
-		};
-
-		usb@22000 {
-			status = "disabled";
-		};
-
-		mdio@24520 {
-			status = "disabled";
-		};
-
-		mdio@25520 {
-			status = "disabled";
-		};
-
-		mdio@26520 {
-			status = "disabled";
-		};
-
-		enet1: ethernet@25000 {
-			status = "disabled";
-		};
-
-		enet2: ethernet@26000 {
-			status = "disabled";
-		};
-
-		sdhci@2e000 {
-			status = "disabled";
-		};
-
-		crypto@30000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
-			16 20 21 22 23 28 	/* L2, dma1, USB */
-			03 35 36 40 31 32 33 	/* mdio, enet1, enet2 */
-			72 45 58 25 		/* sdhci, crypto , pci */
-			>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			status = "disabled";
-		};
-
-	};
-
-	pci0: pcie@ffe08000 {
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe09000 {
-		status = "disabled";
-	};
-};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index baab0347dab0..d97ad74c7279 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -94,6 +94,10 @@
 				compatible = "pericom,pt7c4338";
 				reg = <0x68>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 
 		i2c@118100 {
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index 6cdcadc80c30..2fed3bc0b990 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -98,6 +98,10 @@
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index 3e204609d02e..1cf6148b8b05 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -96,6 +96,10 @@
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 
 		usb0: usb@210000 {
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index 27c07ed6adc1..2869fea717dd 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -98,6 +98,10 @@
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/p5040ds.dts
new file mode 100644
index 000000000000..860b5ccf76c0
--- /dev/null
+++ b/arch/powerpc/boot/dts/p5040ds.dts
@@ -0,0 +1,207 @@
+/*
+ * P5040DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/include/ "fsl/p5040si-pre.dtsi"
+
+/ {
+	model = "fsl,P5040DS";
+	compatible = "fsl,P5040DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x40>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/p5040si-post.dtsi"
diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig
index f4337bacd0e7..b80bcc69d1f7 100644
--- a/arch/powerpc/configs/85xx/p1023rds_defconfig
+++ b/arch/powerpc/configs/85xx/p1023rds_defconfig
@@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_EMBEDDED=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_P1023_RDS=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
-CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
@@ -63,11 +62,11 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -80,15 +79,14 @@ CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_E1000E=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_E1000E=y
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -98,16 +96,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
-CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_SOUND=y
@@ -115,6 +112,12 @@ CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_STORAGE=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
@@ -123,7 +126,6 @@ CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
 # CONFIG_NET_DMA is not set
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -150,22 +152,15 @@ CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_FRAME_WARN=8092
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index cbb98c1234fd..1c0f2432ecdb 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_RCU_TRACE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -21,23 +21,23 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_P2041_RDB=y
 CONFIG_P3041_DS=y
 CONFIG_P4080_DS=y
 CONFIG_P5020_DS=y
+CONFIG_P5040_DS=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FSL_LBC=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
 # CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
 CONFIG_FSL_RIO=y
 CONFIG_NET=y
@@ -70,6 +70,7 @@ CONFIG_INET_IPCOMP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -77,17 +78,14 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
@@ -115,11 +113,9 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -132,7 +128,6 @@ CONFIG_SPI_FSL_ESPI=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_USB_HID=m
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
@@ -142,8 +137,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
@@ -170,19 +163,16 @@ CONFIG_HUGETLBFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_RCU_TRACE=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index dd89de8b0b7f..88fa5c46f66f 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -23,6 +23,7 @@ CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_P5020_DS=y
+CONFIG_P5040_DS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_IRQ_ALL_CPUS=y
@@ -56,6 +57,7 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 15130066e5e2..07b7f2af2dca 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,8 +1,10 @@
+CONFIG_PPC64=y
+CONFIG_ALTIVEC=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
@@ -13,15 +15,16 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_KEXEC=y
-# CONFIG_RELOCATABLE is not set
+# CONFIG_PPC_PSERIES is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_MIGRATION is not set
 CONFIG_PCI_MSI=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
@@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
@@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
-CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
 CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
 CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
 CONFIG_DUMMY=m
-CONFIG_MII=y
+CONFIG_BONDING=m
 CONFIG_TUN=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SUNGEM=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_TIGON3=y
 CONFIG_E1000=y
-CONFIG_SUNGEM=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
+CONFIG_TIGON3=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_RAW_DRIVER=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_HWMON is not set
-CONFIG_AGP=y
-CONFIG_DRM=y
-CONFIG_DRM_NOUVEAU=y
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
 CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_OF=y
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
 CONFIG_FB_RADEON=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
@@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_USB_AUDIO=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_HID_GYRATION=y
 CONFIG_LOGITECH_FF=y
 CONFIG_HID_PANTHERLORD=y
@@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
@@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_POSIX_ACL=y
+CONFIG_INOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
@@ -221,12 +259,14 @@ CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_1250=y
 CONFIG_NLS_CODEPAGE_1251=y
@@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_LATENCYTOP=y
-CONFIG_STRICT_DEVMEM=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BOOTX_TEXT=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 5aac9a8bc53b..9352e4430c3b 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_83xx=y
@@ -25,7 +25,6 @@ CONFIG_ASP834x=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_MATH_EMULATION=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_PCI=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -42,10 +41,9 @@ CONFIG_INET_ESP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -64,15 +62,14 @@ CONFIG_ATA=y
 CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL=y
 CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -112,17 +109,12 @@ CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 03ee911c4577..cf815e847cdc 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -26,6 +30,7 @@ CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
@@ -40,8 +45,6 @@ CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_FORCE_MAX_ZONEORDER=12
@@ -74,36 +77,25 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
 CONFIG_FTL=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -115,6 +107,7 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
 CONFIG_PATA_ALI=y
+CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
@@ -134,7 +127,6 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
@@ -183,7 +175,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
@@ -229,18 +220,13 @@ CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index fdfa84dc908f..502cd9e027e4 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -28,6 +32,7 @@ CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
@@ -42,8 +47,6 @@ CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_IRQ_ALL_CPUS=y
@@ -77,36 +80,25 @@ CONFIG_INET_ESP=y
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
 CONFIG_FTL=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -137,7 +129,6 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
@@ -186,7 +177,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
@@ -232,18 +222,13 @@ CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index f8b394a76ac3..29767a8dfea5 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -55,7 +55,6 @@ CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index db27c82e0542..6d03530b7506 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -51,6 +51,7 @@ CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SCHED_SMT=y
+CONFIG_PPC_DENORMALISATION=y
 CONFIG_PCCARD=y
 CONFIG_ELECTRA_CF=y
 CONFIG_HOTPLUG_PCI=m
@@ -92,7 +93,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -487,7 +487,8 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_NX=m
+CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 7bd1763877ba..f55c27609fc6 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -66,7 +66,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index c47f2becfbc3..be1cb6ea3a36 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -167,7 +167,6 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1f65b3c9b59a..1f710a32ffae 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -48,6 +48,7 @@ CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PPC_64K_PAGES=y
 CONFIG_PPC_SUBPAGE_PROT=y
 CONFIG_SCHED_SMT=y
+CONFIG_PPC_DENORMALISATION=y
 CONFIG_HOTPLUG_PCI=m
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
@@ -369,7 +370,8 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_NX=m
+CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=y
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
deleted file mode 100644
index 9d92ba04b033..000000000000
--- a/arch/powerpc/include/asm/abs_addr.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _ASM_POWERPC_ABS_ADDR_H
-#define _ASM_POWERPC_ABS_ADDR_H
-#ifdef __KERNEL__
-
-
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/memblock.h>
-
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-
-struct mschunks_map {
-        unsigned long num_chunks;
-        unsigned long chunk_size;
-        unsigned long chunk_shift;
-        unsigned long chunk_mask;
-        u32 *mapping;
-};
-
-extern struct mschunks_map mschunks_map;
-
-/* Chunks are 256 KB */
-#define MSCHUNKS_CHUNK_SHIFT	(18)
-#define MSCHUNKS_CHUNK_SIZE	(1UL << MSCHUNKS_CHUNK_SHIFT)
-#define MSCHUNKS_OFFSET_MASK	(MSCHUNKS_CHUNK_SIZE - 1)
-
-static inline unsigned long chunk_to_addr(unsigned long chunk)
-{
-	return chunk << MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long addr_to_chunk(unsigned long addr)
-{
-	return addr >> MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long phys_to_abs(unsigned long pa)
-{
-	return pa;
-}
-
-/* Convenience macros */
-#define virt_to_abs(va) phys_to_abs(__pa(va))
-#define abs_to_virt(aa) __va(aa)
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index efdc92618b38..dc2cf9c6d9e6 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -288,6 +288,16 @@ static __inline__ int test_bit_le(unsigned long nr,
 	return (tmp[nr >> 3] >> (nr & 7)) & 1;
 }
 
+static inline void set_bit_le(int nr, void *addr)
+{
+	set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline void clear_bit_le(int nr, void *addr)
+{
+	clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
 static inline void __set_bit_le(int nr, void *addr)
 {
 	__set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ab9e402518e8..b843e35122e8 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -30,6 +30,8 @@ extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
+extern void __flush_disable_L1(void);
+
 extern void __flush_icache_range(unsigned long, unsigned long);
 static inline void flush_icache_range(unsigned long start, unsigned long stop)
 {
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 88e602f6430d..84fdf6857c31 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -38,6 +38,7 @@ typedef s64		compat_s64;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
 typedef u64		compat_u64;
+typedef u32		compat_uptr_t;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
@@ -114,6 +115,64 @@ typedef u32		compat_old_sigset_t;
 
 typedef u32		compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+#define SI_PAD_SIZE32	(128/sizeof(int) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			__compat_uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;		/* timer id */
+			int _overrun;			/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			__compat_uid_t _uid;		/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;		/* which child */
+			__compat_uid_t _uid;		/* sender's uid */
+			int _status;			/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */
+		struct {
+			unsigned int _addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
@@ -123,7 +182,6 @@ typedef u32		compat_sigset_word;
  * as pointers because the syscall entry code will have
  * appropriately converted them already.
  */
-typedef	u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 50d82c8a037f..b3c083de17ad 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature)
 		& feature);
 }
 
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
 #define HBP_NUM 1
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/debug.h b/arch/powerpc/include/asm/debug.h
index 716d2f089eb6..32de2577bb6d 100644
--- a/arch/powerpc/include/asm/debug.h
+++ b/arch/powerpc/include/asm/debug.h
@@ -44,7 +44,7 @@ static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
 static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
-extern int set_dabr(unsigned long dabr);
+extern int set_dabr(unsigned long dabr, unsigned long dabrx);
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 extern void do_send_trap(struct pt_regs *regs, unsigned long address,
 			 unsigned long error_code, int signal_code, int brkpt);
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index d60f99814ffb..b0ef73882b38 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -32,27 +32,62 @@ struct device_node;
 #ifdef CONFIG_EEH
 
 /*
+ * The struct is used to trace PE related EEH functionality.
+ * In theory, there will have one instance of the struct to
+ * be created against particular PE. In nature, PEs corelate
+ * to each other. the struct has to reflect that hierarchy in
+ * order to easily pick up those affected PEs when one particular
+ * PE has EEH errors.
+ *
+ * Also, one particular PE might be composed of PCI device, PCI
+ * bus and its subordinate components. The struct also need ship
+ * the information. Further more, one particular PE is only meaingful
+ * in the corresponding PHB. Therefore, the root PEs should be created
+ * against existing PHBs in on-to-one fashion.
+ */
+#define EEH_PE_INVALID	(1 << 0)	/* Invalid   */
+#define EEH_PE_PHB	(1 << 1)	/* PHB PE    */
+#define EEH_PE_DEVICE 	(1 << 2)	/* Device PE */
+#define EEH_PE_BUS	(1 << 3)	/* Bus PE    */
+
+#define EEH_PE_ISOLATED		(1 << 0)	/* Isolated PE		*/
+#define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
+
+struct eeh_pe {
+	int type;			/* PE type: PHB/Bus/Device	*/
+	int state;			/* PE EEH dependent mode	*/
+	int config_addr;		/* Traditional PCI address	*/
+	int addr;			/* PE configuration address	*/
+	struct pci_controller *phb;	/* Associated PHB		*/
+	int check_count;		/* Times of ignored error	*/
+	int freeze_count;		/* Times of froze up		*/
+	int false_positives;		/* Times of reported #ff's	*/
+	struct eeh_pe *parent;		/* Parent PE			*/
+	struct list_head child_list;	/* Link PE to the child list	*/
+	struct list_head edevs;		/* Link list of EEH devices	*/
+	struct list_head child;		/* Child PEs			*/
+};
+
+#define eeh_pe_for_each_dev(pe, edev) \
+		list_for_each_entry(edev, &pe->edevs, list)
+
+/*
  * The struct is used to trace EEH state for the associated
  * PCI device node or PCI device. In future, it might
  * represent PE as well so that the EEH device to form
  * another tree except the currently existing tree of PCI
  * buses and PCI devices
  */
-#define EEH_MODE_SUPPORTED	(1<<0)	/* EEH supported on the device	*/
-#define EEH_MODE_NOCHECK	(1<<1)	/* EEH check should be skipped	*/
-#define EEH_MODE_ISOLATED	(1<<2)	/* The device has been isolated	*/
-#define EEH_MODE_RECOVERING	(1<<3)	/* Recovering the device	*/
-#define EEH_MODE_IRQ_DISABLED	(1<<4)	/* Interrupt disabled		*/
+#define EEH_DEV_IRQ_DISABLED	(1<<0)	/* Interrupt disabled		*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
 	int class_code;			/* Class code of the device	*/
 	int config_addr;		/* Config address		*/
 	int pe_config_addr;		/* PE config address		*/
-	int check_count;		/* Times of ignored error	*/
-	int freeze_count;		/* Times of froze up		*/
-	int false_positives;		/* Times of reported #ff's	*/
 	u32 config_space[16];		/* Saved PCI config space	*/
+	struct eeh_pe *pe;		/* Associated PE		*/
+	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
 	struct device_node *dn;		/* Associated device node	*/
 	struct pci_dev *pdev;		/* Associated PCI device	*/
@@ -95,19 +130,51 @@ static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev)
 struct eeh_ops {
 	char *name;
 	int (*init)(void);
-	int (*set_option)(struct device_node *dn, int option);
-	int (*get_pe_addr)(struct device_node *dn);
-	int (*get_state)(struct device_node *dn, int *state);
-	int (*reset)(struct device_node *dn, int option);
-	int (*wait_state)(struct device_node *dn, int max_wait);
-	int (*get_log)(struct device_node *dn, int severity, char *drv_log, unsigned long len);
-	int (*configure_bridge)(struct device_node *dn);
+	void* (*of_probe)(struct device_node *dn, void *flag);
+	void* (*dev_probe)(struct pci_dev *dev, void *flag);
+	int (*set_option)(struct eeh_pe *pe, int option);
+	int (*get_pe_addr)(struct eeh_pe *pe);
+	int (*get_state)(struct eeh_pe *pe, int *state);
+	int (*reset)(struct eeh_pe *pe, int option);
+	int (*wait_state)(struct eeh_pe *pe, int max_wait);
+	int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len);
+	int (*configure_bridge)(struct eeh_pe *pe);
 	int (*read_config)(struct device_node *dn, int where, int size, u32 *val);
 	int (*write_config)(struct device_node *dn, int where, int size, u32 val);
 };
 
 extern struct eeh_ops *eeh_ops;
 extern int eeh_subsystem_enabled;
+extern struct mutex eeh_mutex;
+extern int eeh_probe_mode;
+
+#define EEH_PROBE_MODE_DEV	(1<<0)	/* From PCI device	*/
+#define EEH_PROBE_MODE_DEVTREE	(1<<1)	/* From device tree	*/
+
+static inline void eeh_probe_mode_set(int flag)
+{
+	eeh_probe_mode = flag;
+}
+
+static inline int eeh_probe_mode_devtree(void)
+{
+	return (eeh_probe_mode == EEH_PROBE_MODE_DEVTREE);
+}
+
+static inline int eeh_probe_mode_dev(void)
+{
+	return (eeh_probe_mode == EEH_PROBE_MODE_DEV);
+}
+
+static inline void eeh_lock(void)
+{
+	mutex_lock(&eeh_mutex);
+}
+
+static inline void eeh_unlock(void)
+{
+	mutex_unlock(&eeh_mutex);
+}
 
 /*
  * Max number of EEH freezes allowed before we consider the device
@@ -115,22 +182,26 @@ extern int eeh_subsystem_enabled;
  */
 #define EEH_MAX_ALLOWED_FREEZES 5
 
+typedef void *(*eeh_traverse_func)(void *data, void *flag);
+int __devinit eeh_phb_pe_create(struct pci_controller *phb);
+int eeh_add_to_parent_pe(struct eeh_dev *edev);
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe);
+void *eeh_pe_dev_traverse(struct eeh_pe *root,
+		eeh_traverse_func fn, void *flag);
+void eeh_pe_restore_bars(struct eeh_pe *pe);
+struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
+
 void * __devinit eeh_dev_init(struct device_node *dn, void *data);
 void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb);
-void __init eeh_dev_phb_init(void);
-void __init eeh_init(void);
-#ifdef CONFIG_PPC_PSERIES
-int __init eeh_pseries_init(void);
-#endif
 int __init eeh_ops_register(struct eeh_ops *ops);
 int __exit eeh_ops_unregister(const char *name);
 unsigned long eeh_check_failure(const volatile void __iomem *token,
 				unsigned long val);
-int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
-void __init pci_addr_cache_build(void);
+int eeh_dev_check_failure(struct eeh_dev *edev);
+void __init eeh_addr_cache_build(void);
 void eeh_add_device_tree_early(struct device_node *);
 void eeh_add_device_tree_late(struct pci_bus *);
-void eeh_remove_bus_device(struct pci_dev *);
+void eeh_remove_bus_device(struct pci_dev *, int);
 
 /**
  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@@ -156,34 +227,24 @@ static inline void *eeh_dev_init(struct device_node *dn, void *data)
 
 static inline void eeh_dev_phb_init_dynamic(struct pci_controller *phb) { }
 
-static inline void eeh_dev_phb_init(void) { }
-
-static inline void eeh_init(void) { }
-
-#ifdef CONFIG_PPC_PSERIES
-static inline int eeh_pseries_init(void)
-{
-	return 0;
-}
-#endif /* CONFIG_PPC_PSERIES */
-
 static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
 {
 	return val;
 }
 
-static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
-{
-	return 0;
-}
+#define eeh_dev_check_failure(x) (0)
 
-static inline void pci_addr_cache_build(void) { }
+static inline void eeh_addr_cache_build(void) { }
 
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
-static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
+static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
+
+static inline void eeh_lock(void) { }
+static inline void eeh_unlock(void) { }
+
 #define EEH_POSSIBLE_ERROR(val, type) (0)
 #define EEH_IO_ERROR_VALUE(size) (-1UL)
 #endif /* CONFIG_EEH */
diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
index c68b012b7797..de67d830151b 100644
--- a/arch/powerpc/include/asm/eeh_event.h
+++ b/arch/powerpc/include/asm/eeh_event.h
@@ -28,11 +28,11 @@
  */
 struct eeh_event {
 	struct list_head	list;	/* to form event queue	*/
-	struct eeh_dev		*edev;	/* EEH device		*/
+	struct eeh_pe		*pe;	/* EEH PE		*/
 };
 
-int eeh_send_failure_event(struct eeh_dev *edev);
-struct eeh_dev *handle_eeh_events(struct eeh_event *);
+int eeh_send_failure_event(struct eeh_pe *pe);
+void eeh_handle_event(struct eeh_pe *pe);
 
 #endif /* __KERNEL__ */
 #endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index ac13addb8495..51fa43e536b9 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -37,6 +37,7 @@
  * critical data
  */
 
+#define PACA_EXGDBELL PACA_EXGEN
 
 /* We are out of SPRGs so we save some things in the PACA. The normal
  * exception frame is smaller than the CRIT or MC one though
@@ -45,8 +46,9 @@
 #define EX_CR		(1 * 8)
 #define EX_R10		(2 * 8)
 #define EX_R11		(3 * 8)
-#define EX_R14		(4 * 8)
-#define EX_R15		(5 * 8)
+#define EX_R13		(4 * 8)
+#define EX_R14		(5 * 8)
+#define EX_R15		(6 * 8)
 
 /*
  * The TLB miss exception uses different slots.
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h
index aa4c488589ce..dd5ba2c22771 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -48,6 +48,8 @@ struct ccsr_guts {
         __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
         u8	res06c[0x70 - 0x6c];
 	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+#define CCSR_GUTS_DEVDISR_TB1	0x00001000
+#define CCSR_GUTS_DEVDISR_TB0	0x00004000
 	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
 	u8	res078[0x7c - 0x78];
 	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
index b955012939a2..b8a4b9bc50b3 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -768,22 +768,24 @@ struct fsl_ifc_gpcm {
  */
 struct fsl_ifc_regs {
 	__be32 ifc_rev;
-	u32 res1[0x3];
+	u32 res1[0x2];
 	struct {
+		__be32 cspr_ext;
 		__be32 cspr;
-		u32 res2[0x2];
+		u32 res2;
 	} cspr_cs[FSL_IFC_BANK_COUNT];
-	u32 res3[0x18];
+	u32 res3[0x19];
 	struct {
 		__be32 amask;
 		u32 res4[0x2];
 	} amask_cs[FSL_IFC_BANK_COUNT];
-	u32 res5[0x18];
+	u32 res5[0x17];
 	struct {
+		__be32 csor_ext;
 		__be32 csor;
-		u32 res6[0x2];
+		u32 res6;
 	} csor_cs[FSL_IFC_BANK_COUNT];
-	u32 res7[0x18];
+	u32 res7[0x19];
 	struct {
 		__be32 ftim[4];
 		u32 res8[0x8];
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 423cf9eaf4a4..7a867065db79 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -152,11 +152,6 @@
 #define H_VASI_RESUMED          5
 #define H_VASI_COMPLETED        6
 
-/* DABRX flags */
-#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
-#define H_DABRX_KERNEL		(1UL<<(63-62))
-#define H_DABRX_USER		(1UL<<(63-63))
-
 /* Each control block has to be on a 4K boundary */
 #define H_CB_ALIGNMENT          4096
 
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index be04330af751..423424599dad 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -27,10 +27,11 @@
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 
 struct arch_hw_breakpoint {
-	bool		extraneous_interrupt;
-	u8		len; /* length of the target data symbol */
-	int		type;
 	unsigned long	address;
+	unsigned long	dabrx;
+	int		type;
+	u8		len; /* length of the target data symbol */
+	bool		extraneous_interrupt;
 };
 
 #include <linux/kdebug.h>
@@ -61,7 +62,7 @@ extern void ptrace_triggered(struct perf_event *bp,
 			struct perf_sample_data *data, struct pt_regs *regs);
 static inline void hw_breakpoint_disable(void)
 {
-	set_dabr(0);
+	set_dabr(0, 0);
 }
 extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs);
 
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index be0171afdc0f..7b6feab6fd26 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -29,21 +29,16 @@
 #include <linux/types.h>
 #include <linux/ptrace.h>
 #include <linux/percpu.h>
+#include <asm/probes.h>
 
 #define  __ARCH_WANT_KPROBES_INSN_SLOT
 
 struct pt_regs;
 struct kprobe;
 
-typedef unsigned int kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
+typedef ppc_opcode_t kprobe_opcode_t;
 #define MAX_INSN_SIZE 1
 
-#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
-#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
-#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
-#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
-
 #ifdef CONFIG_PPC64
 /*
  * 64bit powerpc uses function descriptors.
@@ -72,12 +67,6 @@ typedef unsigned int kprobe_opcode_t;
 		addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
 	}								\
 }
-
-#define is_trap(instr)	(IS_TW(instr) || IS_TD(instr) || \
-			IS_TWI(instr) || IS_TDI(instr))
-#else
-/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
-#define is_trap(instr)	(IS_TW(instr) || IS_TWI(instr))
 #endif
 
 #define flush_insn_slot(p)	do { } while (0)
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index f0e0c6a66d97..7aefdb3e1ce4 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -59,7 +59,7 @@ struct hpte_cache {
 	struct hlist_node list_vpte;
 	struct hlist_node list_vpte_long;
 	struct rcu_head rcu_head;
-	u64 host_va;
+	u64 host_vpn;
 	u64 pfn;
 	ulong slot;
 	struct kvmppc_pte pte;
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index bfcd00c1485d..88609b23b775 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -74,7 +74,6 @@ struct kvmppc_host_state {
 	ulong vmhandler;
 	ulong scratch0;
 	ulong scratch1;
-	ulong sprg3;
 	u8 in_guest;
 	u8 restore_hid5;
 	u8 napping;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 50ea12fd7bf5..28e8f5e5c63e 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -33,6 +33,7 @@
 #include <asm/kvm_asm.h>
 #include <asm/processor.h>
 #include <asm/page.h>
+#include <asm/cacheflush.h>
 
 #define KVM_MAX_VCPUS		NR_CPUS
 #define KVM_MAX_VCORES		NR_CPUS
@@ -52,6 +53,8 @@
 
 struct kvm;
 extern int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+extern int kvm_unmap_hva_range(struct kvm *kvm,
+			       unsigned long start, unsigned long end);
 extern int kvm_age_hva(struct kvm *kvm, unsigned long hva);
 extern int kvm_test_age_hva(struct kvm *kvm, unsigned long hva);
 extern void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
@@ -219,6 +222,7 @@ struct revmap_entry {
 #define KVMPPC_GOT_PAGE		0x80
 
 struct kvm_arch_memory_slot {
+	unsigned long *rmap;
 };
 
 struct kvm_arch {
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 0124937a23b9..e006f0bdea95 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid);
 void kvmppc_free_lpid(long lpid);
 void kvmppc_init_lpid(unsigned long nr_lpids);
 
+static inline void kvmppc_mmu_flush_icache(pfn_t pfn)
+{
+	/* Clear i-cache for new pages */
+	struct page *page;
+	page = pfn_to_page(pfn);
+	if (!test_bit(PG_arch_1, &page->flags)) {
+		flush_dcache_icache_page(page);
+		set_bit(PG_arch_1, &page->flags);
+	}
+}
+
+
 #endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 42ce570812c1..c4231973edd3 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -34,19 +34,19 @@ struct machdep_calls {
 	char		*name;
 #ifdef CONFIG_PPC64
 	void            (*hpte_invalidate)(unsigned long slot,
-					   unsigned long va,
+					   unsigned long vpn,
 					   int psize, int ssize,
 					   int local);
 	long		(*hpte_updatepp)(unsigned long slot, 
 					 unsigned long newpp, 
-					 unsigned long va,
+					 unsigned long vpn,
 					 int psize, int ssize,
 					 int local);
 	void            (*hpte_updateboltedpp)(unsigned long newpp, 
 					       unsigned long ea,
 					       int psize, int ssize);
 	long		(*hpte_insert)(unsigned long hpte_group,
-				       unsigned long va,
+				       unsigned long vpn,
 				       unsigned long prpn,
 				       unsigned long rflags,
 				       unsigned long vflags,
@@ -180,7 +180,8 @@ struct machdep_calls {
 	void		(*enable_pmcs)(void);
 
 	/* Set DABR for this platform, leave empty for default implemenation */
-	int		(*set_dabr)(unsigned long dabr);
+	int		(*set_dabr)(unsigned long dabr,
+				    unsigned long dabrx);
 
 #ifdef CONFIG_PPC32	/* XXX for now */
 	/* A general init function, called by ppc_init in init/main.c.
@@ -214,6 +215,9 @@ struct machdep_calls {
 	/* Called after scan and before resource survey */
 	void (*pcibios_fixup_phb)(struct pci_controller *hose);
 
+	/* Called during PCI resource reassignment */
+	resource_size_t (*pcibios_window_alignment)(struct pci_bus *, unsigned long type);
+
 	/* Called to shutdown machine specific hardware not already controlled
 	 * by other drivers.
 	 */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 1c65a59881ea..9673f73eb8db 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -16,6 +16,13 @@
 #include <asm/page.h>
 
 /*
+ * This is necessary to get the definition of PGTABLE_RANGE which we
+ * need for various slices related matters. Note that this isn't the
+ * complete pgtable.h but only a portion of it.
+ */
+#include <asm/pgtable-ppc64.h>
+
+/*
  * Segment table
  */
 
@@ -154,9 +161,25 @@ struct mmu_psize_def
 #define MMU_SEGSIZE_256M	0
 #define MMU_SEGSIZE_1T		1
 
+/*
+ * encode page number shift.
+ * in order to fit the 78 bit va in a 64 bit variable we shift the va by
+ * 12 bits. This enable us to address upto 76 bit va.
+ * For hpt hash from a va we can ignore the page size bits of va and for
+ * hpte encoding we ignore up to 23 bits of va. So ignoring lower 12 bits ensure
+ * we work in all cases including 4k page size.
+ */
+#define VPN_SHIFT	12
 
 #ifndef __ASSEMBLY__
 
+static inline int segment_shift(int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return SID_SHIFT;
+	return SID_SHIFT_1T;
+}
+
 /*
  * The current system page and segment sizes
  */
@@ -180,18 +203,39 @@ extern unsigned long tce_alloc_start, tce_alloc_end;
 extern int mmu_ci_restrictions;
 
 /*
+ * This computes the AVPN and B fields of the first dword of a HPTE,
+ * for use when we want to match an existing PTE.  The bottom 7 bits
+ * of the returned value are zero.
+ */
+static inline unsigned long hpte_encode_avpn(unsigned long vpn, int psize,
+					     int ssize)
+{
+	unsigned long v;
+	/*
+	 * The AVA field omits the low-order 23 bits of the 78 bits VA.
+	 * These bits are not needed in the PTE, because the
+	 * low-order b of these bits are part of the byte offset
+	 * into the virtual page and, if b < 23, the high-order
+	 * 23-b of these bits are always used in selecting the
+	 * PTEGs to be searched
+	 */
+	v = (vpn >> (23 - VPN_SHIFT)) & ~(mmu_psize_defs[psize].avpnm);
+	v <<= HPTE_V_AVPN_SHIFT;
+	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
+	return v;
+}
+
+/*
  * This function sets the AVPN and L fields of the HPTE  appropriately
  * for the page size
  */
-static inline unsigned long hpte_encode_v(unsigned long va, int psize,
-					  int ssize)
+static inline unsigned long hpte_encode_v(unsigned long vpn,
+					  int psize, int ssize)
 {
 	unsigned long v;
-	v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
-	v <<= HPTE_V_AVPN_SHIFT;
+	v = hpte_encode_avpn(vpn, psize, ssize);
 	if (psize != MMU_PAGE_4K)
 		v |= HPTE_V_LARGE;
-	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
 	return v;
 }
 
@@ -216,30 +260,37 @@ static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
 }
 
 /*
- * Build a VA given VSID, EA and segment size
+ * Build a VPN_SHIFT bit shifted va given VSID, EA and segment size.
  */
-static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
-				   int ssize)
+static inline unsigned long hpt_vpn(unsigned long ea,
+				    unsigned long vsid, int ssize)
 {
-	if (ssize == MMU_SEGSIZE_256M)
-		return (vsid << 28) | (ea & 0xfffffffUL);
-	return (vsid << 40) | (ea & 0xffffffffffUL);
+	unsigned long mask;
+	int s_shift = segment_shift(ssize);
+
+	mask = (1ul << (s_shift - VPN_SHIFT)) - 1;
+	return (vsid << (s_shift - VPN_SHIFT)) | ((ea >> VPN_SHIFT) & mask);
 }
 
 /*
  * This hashes a virtual address
  */
-
-static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
-				     int ssize)
+static inline unsigned long hpt_hash(unsigned long vpn,
+				     unsigned int shift, int ssize)
 {
+	int mask;
 	unsigned long hash, vsid;
 
+	/* VPN_SHIFT can be atmost 12 */
 	if (ssize == MMU_SEGSIZE_256M) {
-		hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
+		mask = (1ul << (SID_SHIFT - VPN_SHIFT)) - 1;
+		hash = (vpn >> (SID_SHIFT - VPN_SHIFT)) ^
+			((vpn & mask) >> (shift - VPN_SHIFT));
 	} else {
-		vsid = va >> 40;
-		hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
+		mask = (1ul << (SID_SHIFT_1T - VPN_SHIFT)) - 1;
+		vsid = vpn >> (SID_SHIFT_1T - VPN_SHIFT);
+		hash = vsid ^ (vsid << 25) ^
+			((vpn & mask) >> (shift - VPN_SHIFT)) ;
 	}
 	return hash & 0x7fffffffffUL;
 }
@@ -280,63 +331,61 @@ extern void slb_set_size(u16 size);
 #endif /* __ASSEMBLY__ */
 
 /*
- * VSID allocation
+ * VSID allocation (256MB segment)
+ *
+ * We first generate a 38-bit "proto-VSID".  For kernel addresses this
+ * is equal to the ESID | 1 << 37, for user addresses it is:
+ *	(context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
  *
- * We first generate a 36-bit "proto-VSID".  For kernel addresses this
- * is equal to the ESID, for user addresses it is:
- *	(context << 15) | (esid & 0x7fff)
+ * This splits the proto-VSID into the below range
+ *  0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
+ *  2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
  *
- * The two forms are distinguishable because the top bit is 0 for user
- * addresses, whereas the top two bits are 1 for kernel addresses.
- * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
- * now.
+ * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
+ * That is, we assign half of the space to user processes and half
+ * to the kernel.
  *
  * The proto-VSIDs are then scrambled into real VSIDs with the
  * multiplicative hash:
  *
  *	VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
- *	where	VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
- *		VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
  *
- * This scramble is only well defined for proto-VSIDs below
- * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
- * reserved.  VSID_MULTIPLIER is prime, so in particular it is
+ * VSID_MULTIPLIER is prime, so in particular it is
  * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
  * Because the modulus is 2^n-1 we can compute it efficiently without
  * a divide or extra multiply (see below).
  *
  * This scheme has several advantages over older methods:
  *
- * 	- We have VSIDs allocated for every kernel address
+ *	- We have VSIDs allocated for every kernel address
  * (i.e. everything above 0xC000000000000000), except the very top
  * segment, which simplifies several things.
  *
- *	- We allow for 16 significant bits of ESID and 19 bits of
- * context for user addresses.  i.e. 16T (44 bits) of address space for
- * up to half a million contexts.
+ *	- We allow for USER_ESID_BITS significant bits of ESID and
+ * CONTEXT_BITS  bits of context for user addresses.
+ *  i.e. 64T (46 bits) of address space for up to half a million contexts.
  *
- * 	- The scramble function gives robust scattering in the hash
+ *	- The scramble function gives robust scattering in the hash
  * table (at least based on some initial results).  The previous
  * method was more susceptible to pathological cases giving excessive
  * hash collisions.
  */
+
 /*
- * WARNING - If you change these you must make sure the asm
- * implementations in slb_allocate (slb_low.S), do_stab_bolted
- * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly.
+ * This should be computed such that protovosid * vsid_mulitplier
+ * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
  */
-
-#define VSID_MULTIPLIER_256M	ASM_CONST(200730139)	/* 28-bit prime */
-#define VSID_BITS_256M		36
+#define VSID_MULTIPLIER_256M	ASM_CONST(12538073)	/* 24-bit prime */
+#define VSID_BITS_256M		38
 #define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
 
 #define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_1T		24
+#define VSID_BITS_1T		26
 #define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
 
 #define CONTEXT_BITS		19
-#define USER_ESID_BITS		16
-#define USER_ESID_BITS_1T	4
+#define USER_ESID_BITS		18
+#define USER_ESID_BITS_1T	6
 
 #define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
 
@@ -372,6 +421,8 @@ extern void slb_set_size(u16 size);
 	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
 	add	rt,rt,rx
 
+/* 4 bits per slice and we have one slice per 1TB */
+#define SLICE_ARRAY_SIZE  (PGTABLE_RANGE >> 41)
 
 #ifndef __ASSEMBLY__
 
@@ -416,7 +467,7 @@ typedef struct {
 
 #ifdef CONFIG_PPC_MM_SLICES
 	u64 low_slices_psize;	/* SLB page size encodings */
-	u64 high_slices_psize;  /* 4 bits per slice for now */
+	unsigned char high_slices_psize[SLICE_ARRAY_SIZE];
 #else
 	u16 sllp;		/* SLB page size encoding */
 #endif
@@ -452,12 +503,32 @@ typedef struct {
 	})
 #endif /* 1 */
 
-/* This is only valid for addresses >= PAGE_OFFSET */
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ * The proto-VSID space is divided into two class
+ * User:   0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
+ * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
+ *
+ * With KERNEL_START at 0xc000000000000000, the proto vsid for
+ * the kernel ends up with 0xc00000000 (36 bits). With 64TB
+ * support we need to have kernel proto-VSID in the
+ * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
+ */
 static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
 {
-	if (ssize == MMU_SEGSIZE_256M)
-		return vsid_scramble(ea >> SID_SHIFT, 256M);
-	return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
+	unsigned long proto_vsid;
+	/*
+	 * We need to make sure proto_vsid for the kernel is
+	 * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
+	 */
+	if (ssize == MMU_SEGSIZE_256M) {
+		proto_vsid = ea >> SID_SHIFT;
+		proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
+		return vsid_scramble(proto_vsid, 256M);
+	}
+	proto_vsid = ea >> SID_SHIFT_1T;
+	proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
+	return vsid_scramble(proto_vsid, 1T);
 }
 
 /* Returns the segment size indicator for a user address */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index e8a26db2e8f3..5e38eedea218 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -146,6 +146,15 @@ extern void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 extern u64 ppc64_rma_size;
 #endif /* CONFIG_PPC64 */
 
+struct mm_struct;
+#ifdef CONFIG_DEBUG_VM
+extern void assert_pte_locked(struct mm_struct *mm, unsigned long addr);
+#else /* CONFIG_DEBUG_VM */
+static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
+{
+}
+#endif /* !CONFIG_DEBUG_VM */
+
 #endif /* !__ASSEMBLY__ */
 
 /* The kernel use the constants below to index in the page sizes array.
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 1f41382eda38..0acc7c7c28d1 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -307,6 +307,7 @@ struct mpc52xx_lpbfifo_request {
 	size_t size;
 	size_t pos;	/* current position of transfer */
 	int flags;
+	int defer_xfer_start;
 
 	/* What to do when finished */
 	void (*callback)(struct mpc52xx_lpbfifo_request *);
@@ -323,6 +324,7 @@ struct mpc52xx_lpbfifo_request {
 extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req);
 extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req);
 extern void mpc52xx_lpbfifo_poll(void);
+extern int mpc52xx_lpbfifo_start_xfer(struct mpc52xx_lpbfifo_request *req);
 
 /* mpc52xx_pic.c */
 extern void mpc52xx_init_irq(void);
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index c9f698a994be..c0f9ef90f0b8 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -63,6 +63,7 @@
  */
 #define MPIC_TIMER_BASE			0x01100
 #define MPIC_TIMER_STRIDE		0x40
+#define MPIC_TIMER_GROUP_STRIDE		0x1000
 
 #define MPIC_TIMER_CURRENT_CNT		0x00000
 #define MPIC_TIMER_BASE_CNT		0x00010
@@ -110,10 +111,16 @@
 #define 	MPIC_VECPRI_SENSE_MASK			0x00400000
 #define MPIC_IRQ_DESTINATION		0x00010
 
+#define MPIC_FSL_BRR1			0x00000
+#define 	MPIC_FSL_BRR1_VER			0x0000ffff
+
 #define MPIC_MAX_IRQ_SOURCES	2048
 #define MPIC_MAX_CPUS		32
 #define MPIC_MAX_ISU		32
 
+#define MPIC_MAX_ERR      32
+#define MPIC_FSL_ERR_INT  16
+
 /*
  * Tsi108 implementation of MPIC has many differences from the original one
  */
@@ -266,6 +273,7 @@ struct mpic
 	struct irq_chip		hc_ipi;
 #endif
 	struct irq_chip		hc_tm;
+	struct irq_chip		hc_err;
 	const char		*name;
 	/* Flags */
 	unsigned int		flags;
@@ -279,6 +287,8 @@ struct mpic
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
 	unsigned int		timer_vecs[8];
+	/* vector numbers used for FSL MPIC error interrupts */
+	unsigned int		err_int_vecs[MPIC_MAX_ERR];
 
 	/* Spurious vector to program into unused sources */
 	unsigned int		spurious_vec;
@@ -296,11 +306,15 @@ struct mpic
 	phys_addr_t paddr;
 
 	/* The various ioremap'ed bases */
+	struct mpic_reg_bank	thiscpuregs;
 	struct mpic_reg_bank	gregs;
 	struct mpic_reg_bank	tmregs;
 	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];
 	struct mpic_reg_bank	isus[MPIC_MAX_ISU];
 
+	/* ioremap'ed base for error interrupt registers */
+	u32 __iomem	*err_regs;
+
 	/* Protected sources */
 	unsigned long		*protected;
 
@@ -365,6 +379,11 @@ struct mpic
 #define MPIC_NO_RESET			0x00004000
 /* Freescale MPIC (compatible includes "fsl,mpic") */
 #define MPIC_FSL			0x00008000
+/* Freescale MPIC supports EIMR (error interrupt mask register).
+ * This flag is set for MPIC version >= 4.1 (version determined
+ * from the BRR1 register).
+*/
+#define MPIC_FSL_HAS_EIMR		0x00010000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000
diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h
index 326d33ca55cd..d4f471fb1031 100644
--- a/arch/powerpc/include/asm/mpic_msgr.h
+++ b/arch/powerpc/include/asm/mpic_msgr.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <asm/smp.h>
+#include <asm/io.h>
 
 struct mpic_msgr {
 	u32 __iomem *base;
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index daf813fea91f..e9e7a6999bb8 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -100,7 +100,7 @@ struct paca_struct {
 	/* SLB related definitions */
 	u16 vmalloc_sllp;
 	u16 slb_cache_ptr;
-	u16 slb_cache[SLB_CACHE_ENTRIES];
+	u32 slb_cache[SLB_CACHE_ENTRIES];
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
 #ifdef CONFIG_PPC_BOOK3E
@@ -136,6 +136,7 @@ struct paca_struct {
 	u8 io_sync;			/* writel() needs spin_unlock sync */
 	u8 irq_work_pending;		/* IRQ_WORK interrupt while soft-disable */
 	u8 nap_state_lost;		/* NV GPR values lost in power7_idle */
+	u64 sprg3;			/* Saved user-visible sprg */
 
 #ifdef CONFIG_PPC_POWERNV
 	/* Pointer to OPAL machine check event structure set by the
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index fed85e6290e1..cd915d6b093d 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -78,11 +78,19 @@ extern u64 ppc64_pft_size;
 #define GET_LOW_SLICE_INDEX(addr)	((addr) >> SLICE_LOW_SHIFT)
 #define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
 
+/*
+ * 1 bit per slice and we have one slice per 1TB
+ * Right now we support only 64TB.
+ * IF we change this we will have to change the type
+ * of high_slices
+ */
+#define SLICE_MASK_SIZE 8
+
 #ifndef __ASSEMBLY__
 
 struct slice_mask {
 	u16 low_slices;
-	u16 high_slices;
+	u64 high_slices;
 };
 
 struct mm_struct;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 8cccbee61519..025a130729bc 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -182,14 +182,25 @@ static inline int pci_device_from_OF_node(struct device_node *np,
 #if defined(CONFIG_EEH)
 static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
 {
+	/*
+	 * For those OF nodes whose parent isn't PCI bridge, they
+	 * don't have PCI_DN actually. So we have to skip them for
+	 * any EEH operations.
+	 */
+	if (!dn || !PCI_DN(dn))
+		return NULL;
+
 	return PCI_DN(dn)->edev;
 }
+#else
+#define of_node_to_eeh_dev(x) (NULL)
 #endif
 
 /** Find the bus corresponding to the indicated device node */
 extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
 
 /** Remove all of the PCI devices under this bus */
+extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe);
 extern void pcibios_remove_pci_devices(struct pci_bus *bus);
 
 /** Discover new pci devices under this bus, and add them */
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 078019b5b353..9710be3a2d17 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -49,6 +49,7 @@ struct power_pmu {
 #define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
 #define PPMU_NO_SIPR		4	/* no SIPR/HV in MMCRA at all */
 #define PPMU_NO_CONT_SAMPLING	8	/* no continuous sampling */
+#define PPMU_SIAR_VALID		16	/* Processor has SIAR Valid bit */
 
 /*
  * Values for flags to get_alternatives()
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-4k.h b/arch/powerpc/include/asm/pgtable-ppc64-4k.h
index 6eefdcffa359..12798c9d4b4b 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-4k.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64-4k.h
@@ -7,7 +7,7 @@
  */
 #define PTE_INDEX_SIZE  9
 #define PMD_INDEX_SIZE  7
-#define PUD_INDEX_SIZE  7
+#define PUD_INDEX_SIZE  9
 #define PGD_INDEX_SIZE  9
 
 #ifndef __ASSEMBLY__
@@ -19,7 +19,7 @@
 
 #define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PUD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PUD_INDEX_SIZE)
 #define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
 
 /* PMD_SHIFT determines what a second-level page table entry can map */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
index 90533ddcd703..be4e2878fbc0 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
@@ -7,7 +7,7 @@
 #define PTE_INDEX_SIZE  12
 #define PMD_INDEX_SIZE  12
 #define PUD_INDEX_SIZE	0
-#define PGD_INDEX_SIZE  4
+#define PGD_INDEX_SIZE  6
 
 #ifndef __ASSEMBLY__
 #define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index c4205616dfb5..0182c203e411 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -21,17 +21,6 @@
 #define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
 
 
-/* Some sanity checking */
-#if TASK_SIZE_USER64 > PGTABLE_RANGE
-#error TASK_SIZE_USER64 exceeds pagetable range
-#endif
-
-#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
-#error TASK_SIZE_USER64 exceeds user VSID range
-#endif
-#endif
-
 /*
  * Define the address range of the kernel non-linear virtual area
  */
@@ -41,7 +30,7 @@
 #else
 #define KERN_VIRT_START ASM_CONST(0xD000000000000000)
 #endif
-#define KERN_VIRT_SIZE	PGTABLE_RANGE
+#define KERN_VIRT_SIZE	ASM_CONST(0x0000100000000000)
 
 /*
  * The vmalloc space starts at the beginning of that region, and
@@ -117,9 +106,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/stddef.h>
-#include <asm/tlbflush.h>
-
 /*
  * This is the default implementation of various PTE accessors, it's
  * used in all cases except Book3S with 64K pages where we have a
@@ -198,7 +184,8 @@
 /* to find an entry in a kernel page-table-directory */
 /* This now only contains the vmalloc pages */
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
 
 /* Atomic PTE updates */
 static inline unsigned long pte_update(struct mm_struct *mm,
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 2e0e4110f7ae..a9cbd3ba5c33 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -9,14 +9,6 @@
 
 struct mm_struct;
 
-#ifdef CONFIG_DEBUG_VM
-extern void assert_pte_locked(struct mm_struct *mm, unsigned long addr);
-#else /* CONFIG_DEBUG_VM */
-static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
-{
-}
-#endif /* !CONFIG_DEBUG_VM */
-
 #endif /* !__ASSEMBLY__ */
 
 #if defined(CONFIG_PPC64)
@@ -27,6 +19,8 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 
 #ifndef __ASSEMBLY__
 
+#include <asm/tlbflush.h>
+
 /* Generic accessors to PTE bits */
 static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 4c25319f2fbc..5f73ce63fcae 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -126,6 +126,7 @@
 #define PPC_INST_TLBIVAX		0x7c000624
 #define PPC_INST_TLBSRX_DOT		0x7c0006a5
 #define PPC_INST_XXLOR			0xf0000510
+#define PPC_INST_XVCPSGNDP		0xf0000780
 
 #define PPC_INST_NAP			0x4c000364
 #define PPC_INST_SLEEP			0x4c0003a4
@@ -277,6 +278,8 @@
 					       VSX_XX1((s), a, b))
 #define XXLOR(t, a, b)		stringify_in_c(.long PPC_INST_XXLOR | \
 					       VSX_XX3((t), a, b))
+#define XVCPSGNDP(t, a, b)	stringify_in_c(.long (PPC_INST_XVCPSGNDP | \
+					       VSX_XX3((t), (a), (b))))
 
 #define PPC_NAP			stringify_in_c(.long PPC_INST_NAP)
 #define PPC_SLEEP		stringify_in_c(.long PPC_INST_SLEEP)
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 80fa704d410f..ed57fa7920c8 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -47,19 +47,17 @@ extern int rtas_setup_phb(struct pci_controller *phb);
 
 #ifdef CONFIG_EEH
 
-void pci_addr_cache_build(void);
-void pci_addr_cache_insert_device(struct pci_dev *dev);
-void pci_addr_cache_remove_device(struct pci_dev *dev);
-struct pci_dev *pci_addr_cache_get_device(unsigned long addr);
-void eeh_slot_error_detail(struct eeh_dev *edev, int severity);
-int eeh_pci_enable(struct eeh_dev *edev, int function);
-int eeh_reset_pe(struct eeh_dev *);
-void eeh_restore_bars(struct eeh_dev *);
+void eeh_addr_cache_insert_dev(struct pci_dev *dev);
+void eeh_addr_cache_rmv_dev(struct pci_dev *dev);
+struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr);
+void eeh_slot_error_detail(struct eeh_pe *pe, int severity);
+int eeh_pci_enable(struct eeh_pe *pe, int function);
+int eeh_reset_pe(struct eeh_pe *);
+void eeh_save_bars(struct eeh_dev *edev);
 int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
 int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
-void eeh_mark_slot(struct device_node *dn, int mode_flag);
-void eeh_clear_slot(struct device_node *dn, int mode_flag);
-struct device_node *eeh_find_device_pe(struct device_node *dn);
+void eeh_pe_state_mark(struct eeh_pe *pe, int state);
+void eeh_pe_state_clear(struct eeh_pe *pe, int state);
 
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
diff --git a/arch/powerpc/include/asm/probes.h b/arch/powerpc/include/asm/probes.h
new file mode 100644
index 000000000000..5f1e15b68704
--- /dev/null
+++ b/arch/powerpc/include/asm/probes.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_POWERPC_PROBES_H
+#define _ASM_POWERPC_PROBES_H
+#ifdef __KERNEL__
+/*
+ * Definitions common to probes files
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2012
+ */
+#include <linux/types.h>
+
+typedef u32 ppc_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
+
+/* Trap definitions per ISA */
+#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
+#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
+#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
+#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
+
+#ifdef CONFIG_PPC64
+#define is_trap(instr)		(IS_TW(instr) || IS_TD(instr) || \
+				IS_TWI(instr) || IS_TDI(instr))
+#else
+#define is_trap(instr)		(IS_TW(instr) || IS_TWI(instr))
+#endif /* CONFIG_PPC64 */
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_PROBES_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 53b6dfa83344..9dc5cd1fde1a 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -97,8 +97,8 @@ extern struct task_struct *last_task_used_spe;
 #endif
 
 #ifdef CONFIG_PPC64
-/* 64-bit user address space is 44-bits (16TB user VM) */
-#define TASK_SIZE_USER64 (0x0000100000000000UL)
+/* 64-bit user address space is 46-bits (64TB user VM) */
+#define TASK_SIZE_USER64 (0x0000400000000000UL)
 
 /* 
  * 32-bit user address space is 4GB - 1 page 
@@ -219,6 +219,8 @@ struct thread_struct {
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 	unsigned long	dabr;		/* Data address breakpoint register */
+	unsigned long	dabrx;		/*      ... extension  */
+	unsigned long	trap_nr;	/* last trap # on this thread */
 #ifdef CONFIG_ALTIVEC
 	/* Complete AltiVec register set */
 	vector128	vr[32] __attribute__((aligned(16)));
@@ -386,6 +388,7 @@ extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+extern void power7_nap(void);
 
 #ifdef CONFIG_PSERIES_IDLE
 extern void update_smt_snooze_delay(int snooze);
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index 7f065e178ec4..0e15db4d703b 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/device.h>
-#include "cell-pmu.h"
+#include <asm/cell-pmu.h>
 
 union ps3_firmware_version {
 	u64 raw;
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index 59247e816ac5..eedf427c9124 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -58,14 +58,16 @@
 /* Trick: we set __end to va + 64k, which happens works for
  * a 16M page as well as we want only one iteration
  */
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)	    \
-        do {                                                                \
-                unsigned long __end = va + PAGE_SIZE;                       \
-                unsigned __split = (psize == MMU_PAGE_4K ||                 \
-				    psize == MMU_PAGE_64K_AP);              \
-                shift = mmu_psize_defs[psize].shift;                        \
-		for (index = 0; va < __end; index++, va += (1L << shift)) { \
-		        if (!__split || __rpte_sub_valid(rpte, index)) do { \
+#define pte_iterate_hashed_subpages(rpte, psize, vpn, index, shift)	\
+	do {								\
+		unsigned long __end = vpn + (1UL << (PAGE_SHIFT - VPN_SHIFT));	\
+		unsigned __split = (psize == MMU_PAGE_4K ||		\
+				    psize == MMU_PAGE_64K_AP);		\
+		shift = mmu_psize_defs[psize].shift;			\
+		for (index = 0; vpn < __end; index++,			\
+			     vpn += (1L << (shift - VPN_SHIFT))) {	\
+			if (!__split || __rpte_sub_valid(rpte, index))	\
+				do {
 
 #define pte_iterate_hashed_end() } while(0); } } while(0)
 
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 638608677e2a..d24c14163966 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -208,6 +208,9 @@
 #define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
 #define   DABRX_USER	(1UL << 0)
 #define   DABRX_KERNEL	(1UL << 1)
+#define   DABRX_HYP	(1UL << 2)
+#define   DABRX_BTI	(1UL << 3)
+#define   DABRX_ALL     (DABRX_BTI | DABRX_HYP | DABRX_KERNEL | DABRX_USER)
 #define SPRN_DAR	0x013	/* Data Address Register */
 #define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
 #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
@@ -521,6 +524,7 @@
 
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
+#define   HSRR1_DENORM		0x00100000 /* Denorm exception */
 
 #define SPRN_TBCTL	0x35f	/* PA6T Timebase control register */
 #define   TBCTL_FREEZE		0x0000000000000000ull /* Freeze all tbs */
@@ -602,6 +606,10 @@
 #define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
 #define   POWER6_MMCRA_THRM	0x00000020UL
 #define   POWER6_MMCRA_OTHER	0x0000000EUL
+
+#define   POWER7P_MMCRA_SIAR_VALID 0x10000000	/* P7+ SIAR contents valid */
+#define   POWER7P_MMCRA_SDAR_VALID 0x08000000	/* P7+ SDAR contents valid */
+
 #define SPRN_PMC1	787
 #define SPRN_PMC2	788
 #define SPRN_PMC3	789
@@ -761,7 +769,8 @@
  * 64-bit embedded
  *	- SPRG0 generic exception scratch
  *	- SPRG2 TLB exception stack
- *	- SPRG3 CPU and NUMA node for VDSO getcpu (user visible)
+ *	- SPRG3 critical exception scratch and
+ *        CPU and NUMA node for VDSO getcpu (user visible)
  *	- SPRG4 unused (user visible)
  *	- SPRG6 TLB miss scratch (user visible, sorry !)
  *	- SPRG7 critical exception scratch
@@ -858,11 +867,12 @@
 
 #ifdef CONFIG_PPC_BOOK3E_64
 #define SPRN_SPRG_MC_SCRATCH	SPRN_SPRG8
-#define SPRN_SPRG_CRIT_SCRATCH	SPRN_SPRG7
+#define SPRN_SPRG_CRIT_SCRATCH	SPRN_SPRG3
 #define SPRN_SPRG_DBG_SCRATCH	SPRN_SPRG9
 #define SPRN_SPRG_TLB_EXFRAME	SPRN_SPRG2
 #define SPRN_SPRG_TLB_SCRATCH	SPRN_SPRG6
 #define SPRN_SPRG_GEN_SCRATCH	SPRN_SPRG0
+#define SPRN_SPRG_GDBELL_SCRATCH SPRN_SPRG_GEN_SCRATCH
 
 #define SET_PACA(rX)	mtspr	SPRN_SPRG_PACA,rX
 #define GET_PACA(rX)	mfspr	rX,SPRN_SPRG_PACA
@@ -937,7 +947,7 @@
 #define PVR_VER(pvr)	(((pvr) >>  16) & 0xFFFF)	/* Version field */
 #define PVR_REV(pvr)	(((pvr) >>   0) & 0xFFFF)	/* Revison field */
 
-#define __is_processor(pv)	(PVR_VER(mfspr(SPRN_PVR)) == (pv))
+#define pvr_version_is(pvr)	(PVR_VER(mfspr(SPRN_PVR)) == (pvr))
 
 /*
  * IBM has further subdivided the standard PowerPC 16-bit version and
@@ -1002,25 +1012,25 @@
 #define PVR_476_ISS	0x00052000
 
 /* 64-bit processors */
-/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
-#define PV_NORTHSTAR	0x0033
-#define PV_PULSAR	0x0034
-#define PV_POWER4	0x0035
-#define PV_ICESTAR	0x0036
-#define PV_SSTAR	0x0037
-#define PV_POWER4p	0x0038
-#define PV_970		0x0039
-#define PV_POWER5	0x003A
-#define PV_POWER5p	0x003B
-#define PV_970FX	0x003C
-#define PV_POWER6	0x003E
-#define PV_POWER7	0x003F
-#define PV_630		0x0040
-#define PV_630p	0x0041
-#define PV_970MP	0x0044
-#define PV_970GX	0x0045
-#define PV_BE		0x0070
-#define PV_PA6T		0x0090
+#define PVR_NORTHSTAR	0x0033
+#define PVR_PULSAR	0x0034
+#define PVR_POWER4	0x0035
+#define PVR_ICESTAR	0x0036
+#define PVR_SSTAR	0x0037
+#define PVR_POWER4p	0x0038
+#define PVR_970		0x0039
+#define PVR_POWER5	0x003A
+#define PVR_POWER5p	0x003B
+#define PVR_970FX	0x003C
+#define PVR_POWER6	0x003E
+#define PVR_POWER7	0x003F
+#define PVR_630		0x0040
+#define PVR_630p	0x0041
+#define PVR_970MP	0x0044
+#define PVR_970GX	0x0045
+#define PVR_POWER7p	0x004A
+#define PVR_BE		0x0070
+#define PVR_PA6T	0x0090
 
 /* Macros for setting and retrieving special purpose registers */
 #ifndef __ASSEMBLY__
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index d084ce195fc3..8b9a306260b2 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -9,7 +9,7 @@ extern void ppc_printk_progress(char *s, unsigned short hex);
 extern unsigned int rtas_data;
 extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern int init_bootmem_done;	/* set once bootmem is available */
-extern phys_addr_t memory_limit;
+extern unsigned long long memory_limit;
 extern unsigned long klimit;
 extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
 
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h
index 49495b0534ed..ccce3ef5cd86 100644
--- a/arch/powerpc/include/asm/siginfo.h
+++ b/arch/powerpc/include/asm/siginfo.h
@@ -10,7 +10,6 @@
 
 #ifdef __powerpc64__
 #    define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
-#    define SI_PAD_SIZE32		((SI_MAX_SIZE/sizeof(int)) - 3)
 #endif
 
 #include <asm-generic/siginfo.h>
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ebc24dc5b1a1..e807e9d8e3f7 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -65,6 +65,7 @@ int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
+void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
 #endif
 
@@ -190,6 +191,7 @@ extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
 
+extern void __early_start(void);
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 0c5fa3145615..f6fc0ee813d7 100644
--- a/arch/powerpc/include/asm/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -10,8 +10,8 @@
  */
 #define SECTION_SIZE_BITS       24
 
-#define MAX_PHYSADDR_BITS       44
-#define MAX_PHYSMEM_BITS        44
+#define MAX_PHYSADDR_BITS       46
+#define MAX_PHYSMEM_BITS        46
 
 #endif /* CONFIG_SPARSEMEM */
 
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 8979d4cd3d70..de99d6e29430 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -22,4 +22,10 @@ int __init swiotlb_setup_bus_notifier(void);
 
 extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
 
+#ifdef CONFIG_SWIOTLB
+void swiotlb_detect_4g(void);
+#else
+static inline void swiotlb_detect_4g(void) {}
+#endif
+
 #endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 559ae1ee6706..840838769853 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -189,7 +189,7 @@ SYSCALL_SPU(getcwd)
 SYSCALL_SPU(capget)
 SYSCALL_SPU(capset)
 COMPAT_SYS(sigaltstack)
-SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
+SYSX_SPU(sys_sendfile,compat_sys_sendfile_wrapper,sys_sendfile)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 PPC_SYS(vfork)
@@ -229,7 +229,7 @@ COMPAT_SYS_SPU(sched_setaffinity)
 COMPAT_SYS_SPU(sched_getaffinity)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
-SYS32ONLY(sendfile64)
+SYSX(sys_ni_syscall,compat_sys_sendfile64_wrapper,sys_sendfile64)
 COMPAT_SYS_SPU(io_setup)
 SYSCALL_SPU(io_destroy)
 COMPAT_SYS_SPU(io_getevents)
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index faf93529cbf0..8ceea14d6fe4 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -102,7 +102,10 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR		12	/* Force successful syscall return */
 #define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
+#define TIF_UPROBE		14	/* breakpointed or single-stepping */
 #define TIF_SYSCALL_TRACEPOINT	15	/* syscall tracepoint instrumentation */
+#define TIF_EMULATE_STACK_STORE	16	/* Is an instruction emulation
+						for stack store? */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -118,12 +121,14 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
 #define _TIF_NOERROR		(1<<TIF_NOERROR)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_UPROBE		(1<<TIF_UPROBE)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
+#define _TIF_EMULATE_STACK_STORE	(1<<TIF_EMULATE_STACK_STORE)
 #define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
 				 _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT)
 
 #define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_UPROBE)
 #define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
 
 /* Bits in local_flags */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 3b4b4a8da922..c1f267694acb 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -197,12 +197,6 @@ struct cpu_usage {
 
 DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
 
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
-#define account_process_vtime(tsk)		account_process_tick(tsk, 0)
-#else
-#define account_process_vtime(tsk)		do { } while (0)
-#endif
-
 extern void secondary_cpu_time_init(void);
 
 DECLARE_PER_CPU(u64, decrementers_next_tb);
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index 81143fcbd113..61a59271665b 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -95,7 +95,7 @@ struct ppc64_tlb_batch {
 	unsigned long		index;
 	struct mm_struct	*mm;
 	real_pte_t		pte[PPC64_TLB_BATCH_NR];
-	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
+	unsigned long		vpn[PPC64_TLB_BATCH_NR];
 	unsigned int		psize;
 	int			ssize;
 };
@@ -103,9 +103,6 @@ DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
 extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
 
-extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
-			    pte_t *ptep, unsigned long pte, int huge);
-
 #define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
 
 static inline void arch_enter_lazy_mmu_mode(void)
@@ -127,7 +124,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
 #define arch_flush_lazy_mmu_mode()      do {} while (0)
 
 
-extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
+extern void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize,
 			    int ssize, int local);
 extern void flush_hash_range(unsigned long number, int local);
 
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 17bb40cad5bf..4db49590acf5 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -98,11 +98,6 @@ struct exception_table_entry {
  * PowerPC, we can just do these as direct assignments.  (Of course, the
  * exception handling means that it's no longer "just"...)
  *
- * The "user64" versions of the user access functions are versions that
- * allow access of 64-bit data. The "get_user" functions do not
- * properly handle 64-bit data because the value gets down cast to a long.
- * The "put_user" functions already handle 64-bit data properly but we add
- * "user64" versions for completeness
  */
 #define get_user(x, ptr) \
 	__get_user_check((x), (ptr), sizeof(*(ptr)))
@@ -114,12 +109,6 @@ struct exception_table_entry {
 #define __put_user(x, ptr) \
 	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
 
-#ifndef __powerpc64__
-#define __get_user64(x, ptr) \
-	__get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user64(x, ptr) __put_user(x, ptr)
-#endif
-
 #define __get_user_inatomic(x, ptr) \
 	__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
 #define __put_user_inatomic(x, ptr) \
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
index 839aab8bf37d..4644c840e2fa 100644
--- a/arch/powerpc/include/asm/ucc_fast.h
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -19,7 +19,7 @@
 #include <asm/immap_qe.h>
 #include <asm/qe.h>
 
-#include "ucc.h"
+#include <asm/ucc.h>
 
 /* Receive BD's status */
 #define R_E	0x80000000	/* buffer empty */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
index 0980e6ad335b..cf131ffdb8d1 100644
--- a/arch/powerpc/include/asm/ucc_slow.h
+++ b/arch/powerpc/include/asm/ucc_slow.h
@@ -20,7 +20,7 @@
 #include <asm/immap_qe.h>
 #include <asm/qe.h>
 
-#include "ucc.h"
+#include <asm/ucc.h>
 
 /* transmit BD's status */
 #define T_R	0x80000000	/* ready bit */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index bd377a368611..c683fa350add 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -419,6 +419,7 @@
 #define __ARCH_WANT_COMPAT_SYS_TIME
 #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
 #define __ARCH_WANT_SYS_NEWFSTATAT
+#define __ARCH_WANT_COMPAT_SYS_SENDFILE
 #endif
 
 /*
diff --git a/arch/powerpc/include/asm/uprobes.h b/arch/powerpc/include/asm/uprobes.h
new file mode 100644
index 000000000000..b532060d0916
--- /dev/null
+++ b/arch/powerpc/include/asm/uprobes.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_UPROBES_H
+#define _ASM_UPROBES_H
+/*
+ * User-space Probes (UProbes) for powerpc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2007-2012
+ *
+ * Adapted from the x86 port by Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+ */
+
+#include <linux/notifier.h>
+#include <asm/probes.h>
+
+typedef ppc_opcode_t uprobe_opcode_t;
+
+#define MAX_UINSN_BYTES		4
+#define UPROBE_XOL_SLOT_BYTES	(MAX_UINSN_BYTES)
+
+/* The following alias is needed for reference from arch-agnostic code */
+#define UPROBE_SWBP_INSN	BREAKPOINT_INSTRUCTION
+#define UPROBE_SWBP_INSN_SIZE	4 /* swbp insn size in bytes */
+
+struct arch_uprobe {
+	union {
+		u8	insn[MAX_UINSN_BYTES];
+		u32	ainsn;
+	};
+};
+
+struct arch_uprobe_task {
+	unsigned long	saved_trap_nr;
+};
+
+extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
+extern int  arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern int  arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
+extern int  arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
+extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
+#endif	/* _ASM_UPROBES_H */
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bb282dd81612..cde12f8a4ebc 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -96,6 +96,7 @@ obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_UPROBES)		+= uprobes.o
 obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 85b05c463fae..7523539cfe9f 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -76,6 +76,7 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+	DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
@@ -205,6 +206,7 @@ int main(void)
 	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 	DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
+	DEFINE(PACA_SPRG3, offsetof(struct paca_struct, sprg3));
 #endif /* CONFIG_PPC64 */
 
 	/* RTAS */
@@ -533,7 +535,6 @@ int main(void)
 	HSTATE_FIELD(HSTATE_VMHANDLER, vmhandler);
 	HSTATE_FIELD(HSTATE_SCRATCH0, scratch0);
 	HSTATE_FIELD(HSTATE_SCRATCH1, scratch1);
-	HSTATE_FIELD(HSTATE_SPRG3, sprg3);
 	HSTATE_FIELD(HSTATE_IN_GUEST, in_guest);
 	HSTATE_FIELD(HSTATE_RESTORE_HID5, restore_hid5);
 	HSTATE_FIELD(HSTATE_NAPPING, napping);
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 69fdd2322a66..dcd881937f7a 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -16,6 +16,8 @@
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
+#include <asm/mmu-book3e.h>
+#include <asm/asm-offsets.h>
 
 _GLOBAL(__e500_icache_setup)
 	mfspr	r0, SPRN_L1CSR1
@@ -73,27 +75,81 @@ _GLOBAL(__setup_cpu_e500v2)
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_e500mc)
-	mr	r5, r4
-	mflr	r4
+_GLOBAL(__setup_cpu_e5500)
+	mflr	r5
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
 	bl	__setup_e500mc_ivors
-	mtlr	r4
+	/*
+	 * We only want to touch IVOR38-41 if we're running on hardware
+	 * that supports category E.HV.  The architectural way to determine
+	 * this is MMUCFG[LPIDSIZE].
+	 */
+	mfspr	r3, SPRN_MMUCFG
+	rlwinm.	r3, r3, 0, MMUCFG_LPIDSIZE
+	beq	1f
+	bl	__setup_ehv_ivors
+	b	2f
+1:
+	lwz	r3, CPU_SPEC_FEATURES(r4)
+	/* We need this check as cpu_setup is also called for
+	 * the secondary cores. So, if we have already cleared
+	 * the feature on the primary core, avoid doing it on the
+	 * secondary core.
+	 */
+	andis.	r6, r3, CPU_FTR_EMB_HV@h
+	beq	2f
+	rlwinm	r3, r3, 0, ~CPU_FTR_EMB_HV
+	stw	r3, CPU_SPEC_FEATURES(r4)
+2:
+	mtlr	r5
 	blr
 #endif
-/* Right now, restore and setup are the same thing */
+
+#ifdef CONFIG_PPC_BOOK3E_64
 _GLOBAL(__restore_cpu_e5500)
-_GLOBAL(__setup_cpu_e5500)
 	mflr	r4
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
-#ifdef CONFIG_PPC_BOOK3E_64
 	bl	.__setup_base_ivors
 	bl	.setup_perfmon_ivor
 	bl	.setup_doorbell_ivors
+	/*
+	 * We only want to touch IVOR38-41 if we're running on hardware
+	 * that supports category E.HV.  The architectural way to determine
+	 * this is MMUCFG[LPIDSIZE].
+	 */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beq	1f
 	bl	.setup_ehv_ivors
-#else
-	bl	__setup_e500mc_ivors
-#endif
+1:
 	mtlr	r4
 	blr
+
+_GLOBAL(__setup_cpu_e5500)
+	mflr	r5
+	bl	__e500_icache_setup
+	bl	__e500_dcache_setup
+	bl	.__setup_base_ivors
+	bl	.setup_perfmon_ivor
+	bl	.setup_doorbell_ivors
+	/*
+	 * We only want to touch IVOR38-41 if we're running on hardware
+	 * that supports category E.HV.  The architectural way to determine
+	 * this is MMUCFG[LPIDSIZE].
+	 */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beq	1f
+	bl	.setup_ehv_ivors
+	b	2f
+1:
+	ld	r10,CPU_SPEC_FEATURES(r4)
+	LOAD_REG_IMMEDIATE(r9,CPU_FTR_EMB_HV)
+	andc	r10,r10,r9
+	std	r10,CPU_SPEC_FEATURES(r4)
+2:
+	mtlr	r5
+	blr
+#endif
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 455faa389876..0514c21f138b 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2016,7 +2016,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e5500,
+#ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e5500,
+#endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce5500",
 	},
@@ -2034,7 +2036,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.oprofile_cpu_type	= "ppc/e6500",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e5500,
+#ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e5500,
+#endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce6500",
 	},
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 5b25c8060fd6..a892680668d8 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
 
 void doorbell_cause_ipi(int cpu, unsigned long data)
 {
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	mb();
 	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 2d7bb8ced136..e4897523de41 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 0;
 	}
 
-	if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) {
-		dev_info(dev, "Warning: IOMMU window too big for device mask\n");
-		dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n",
-				mask, (tbl->it_offset + tbl->it_size) <<
-				IOMMU_PAGE_SHIFT);
+	if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) {
+		dev_info(dev, "Warning: IOMMU offset too big for device mask\n");
+		dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n",
+				mask, tbl->it_offset << IOMMU_PAGE_SHIFT);
 		return 0;
 	} else
 		return 1;
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 46943651da23..bd1a2aba599f 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/memblock.h>
 #include <linux/pfn.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
@@ -20,7 +21,6 @@
 #include <asm/machdep.h>
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
-#include <asm/abs_addr.h>
 
 unsigned int ppc_swiotlb_enable;
 
@@ -105,3 +105,23 @@ int __init swiotlb_setup_bus_notifier(void)
 			      &ppc_swiotlb_plat_bus_notifier);
 	return 0;
 }
+
+void swiotlb_detect_4g(void)
+{
+	if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
+		ppc_swiotlb_enable = 1;
+}
+
+static int __init swiotlb_late_init(void)
+{
+	if (ppc_swiotlb_enable) {
+		swiotlb_print_info();
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	} else {
+		swiotlb_free();
+	}
+
+	return 0;
+}
+subsys_initcall(swiotlb_late_init);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 355b9d84b0f8..8032b97ccdcb 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -14,7 +14,6 @@
 #include <linux/pci.h>
 #include <asm/vio.h>
 #include <asm/bug.h>
-#include <asm/abs_addr.h>
 #include <asm/machdep.h>
 
 /*
@@ -50,7 +49,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 		return NULL;
 	ret = page_address(page);
 	memset(ret, 0, size);
-	*dma_handle = virt_to_abs(ret) + get_dma_offset(dev);
+	*dma_handle = __pa(ret) + get_dma_offset(dev);
 
 	return ret;
 #endif
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index ead5016b02d0..af37528da49f 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -831,19 +831,56 @@ restore_user:
 	bnel-	load_dbcr0
 #endif
 
-#ifdef CONFIG_PREEMPT
 	b	restore
 
 /* N.B. the only way to get here is from the beq following ret_from_except. */
 resume_kernel:
-	/* check current_thread_info->preempt_count */
+	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
 	CURRENT_THREAD_INFO(r9, r1)
+	lwz	r8,TI_FLAGS(r9)
+	andis.	r8,r8,_TIF_EMULATE_STACK_STORE@h
+	beq+	1f
+
+	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+
+	lwz	r3,GPR1(r1)
+	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
+	mr	r4,r1			/* src:  current exception frame */
+	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+
+	/* Copy from the original to the trampoline. */
+	li	r5,INT_FRAME_SIZE/4	/* size: INT_FRAME_SIZE */
+	li	r6,0			/* start offset: 0 */
+	mtctr	r5
+2:	lwzx	r0,r6,r4
+	stwx	r0,r6,r3
+	addi	r6,r6,4
+	bdnz	2b
+
+	/* Do real store operation to complete stwu */
+	lwz	r5,GPR1(r1)
+	stw	r8,0(r5)
+
+	/* Clear _TIF_EMULATE_STACK_STORE flag */
+	lis	r11,_TIF_EMULATE_STACK_STORE@h
+	addi	r5,r9,TI_FLAGS
+0:	lwarx	r8,0,r5
+	andc	r8,r8,r11
+#ifdef CONFIG_IBM405_ERR77
+	dcbt	0,r5
+#endif
+	stwcx.	r8,0,r5
+	bne-	0b
+1:
+
+#ifdef CONFIG_PREEMPT
+	/* check current_thread_info->preempt_count */
 	lwz	r0,TI_PREEMPT(r9)
 	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
 	bne	restore
-	lwz	r0,TI_FLAGS(r9)
-	andi.	r0,r0,_TIF_NEED_RESCHED
+	andi.	r8,r8,_TIF_NEED_RESCHED
 	beq+	restore
+	lwz	r3,_MSR(r1)
 	andi.	r0,r3,MSR_EE	/* interrupts off? */
 	beq	restore		/* don't schedule if so */
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -864,8 +901,6 @@ resume_kernel:
 	 */
 	bl	trace_hardirqs_on
 #endif
-#else
-resume_kernel:
 #endif /* CONFIG_PREEMPT */
 
 	/* interrupts are hard-disabled at this point */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 4b01a25e29ef..0e931aaffca2 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork)
 	li	r3,0
 	b	syscall_exit
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
+
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-	ld	r6,_CCR(r1)
-	mtcrf	0xFF,r6
-
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	ld	r0,THREAD_VRSAVE(r4)
@@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
+	lwz	r6,THREAD_DSCR_INHERIT(r4)
+	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
-	cmpd	r0,r25
-	beq	1f
+	cmpwi	r6,0
+	bne	1f
+	ld	r0,0(r7)
+1:	cmpd	r0,r25
+	beq	2f
 	mtspr	SPRN_DSCR,r0
-1:	
+2:
 END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 #endif
 
+	ld	r6,_CCR(r1)
+	mtcrf	0xFF,r6
+
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)
@@ -582,6 +593,41 @@ _GLOBAL(ret_from_except_lite)
 	b	.ret_from_except
 
 resume_kernel:
+	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
+	CURRENT_THREAD_INFO(r9, r1)
+	ld	r8,TI_FLAGS(r9)
+	andis.	r8,r8,_TIF_EMULATE_STACK_STORE@h
+	beq+	1f
+
+	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */
+
+	lwz	r3,GPR1(r1)
+	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
+	mr	r4,r1			/* src:  current exception frame */
+	mr	r1,r3			/* Reroute the trampoline frame to r1 */
+
+	/* Copy from the original to the trampoline. */
+	li	r5,INT_FRAME_SIZE/8	/* size: INT_FRAME_SIZE */
+	li	r6,0			/* start offset: 0 */
+	mtctr	r5
+2:	ldx	r0,r6,r4
+	stdx	r0,r6,r3
+	addi	r6,r6,8
+	bdnz	2b
+
+	/* Do real store operation to complete stwu */
+	lwz	r5,GPR1(r1)
+	std	r8,0(r5)
+
+	/* Clear _TIF_EMULATE_STACK_STORE flag */
+	lis	r11,_TIF_EMULATE_STACK_STORE@h
+	addi	r5,r9,TI_FLAGS
+	ldarx	r4,0,r5
+	andc	r4,r4,r11
+	stdcx.	r4,0,r5
+	bne-	0b
+1:
+
 #ifdef CONFIG_PREEMPT
 	/* Check if we need to preempt */
 	andi.	r0,r4,_TIF_NEED_RESCHED
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 98be7f0cd227..4684e33a26c3 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -25,6 +25,8 @@
 #include <asm/ppc-opcode.h>
 #include <asm/mmu.h>
 #include <asm/hw_irq.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_booke_hv_asm.h>
 
 /* XXX This will ultimately add space for a special exception save
  *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
@@ -35,16 +37,18 @@
 #define	SPECIAL_EXC_FRAME_SIZE	INT_FRAME_SIZE
 
 /* Exception prolog code for all exceptions */
-#define EXCEPTION_PROLOG(n, type, addition)				    \
+#define EXCEPTION_PROLOG(n, intnum, type, addition)	    		    \
 	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
 	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
 	std	r10,PACA_EX##type+EX_R10(r13);				    \
 	std	r11,PACA_EX##type+EX_R11(r13);				    \
+	PROLOG_STORE_RESTORE_SCRATCH_##type;				    \
 	mfcr	r10;			/* save CR */			    \
+	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
+	DO_KVM	intnum,SPRN_##type##_SRR1;    /* KVM hook */		    \
+	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
 	addition;			/* additional code for that exc. */ \
 	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
-	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
-	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
 	type##_SET_KSTACK;		/* get special stack if necessary */\
 	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
 	beq	1f;			/* branch around if supervisor */   \
@@ -59,6 +63,10 @@
 #define SPRN_GEN_SRR0	SPRN_SRR0
 #define SPRN_GEN_SRR1	SPRN_SRR1
 
+#define	GDBELL_SET_KSTACK	GEN_SET_KSTACK
+#define SPRN_GDBELL_SRR0	SPRN_GSRR0
+#define SPRN_GDBELL_SRR1	SPRN_GSRR1
+
 #define CRIT_SET_KSTACK						            \
 	ld	r1,PACA_CRIT_STACK(r13);				    \
 	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
@@ -77,29 +85,46 @@
 #define SPRN_MC_SRR0	SPRN_MCSRR0
 #define SPRN_MC_SRR1	SPRN_MCSRR1
 
-#define NORMAL_EXCEPTION_PROLOG(n, addition)				    \
-	EXCEPTION_PROLOG(n, GEN, addition##_GEN(n))
+#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition)			    \
+	EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n))
+
+#define CRIT_EXCEPTION_PROLOG(n, intnum, addition)			    \
+	EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n))
 
-#define CRIT_EXCEPTION_PROLOG(n, addition)				    \
-	EXCEPTION_PROLOG(n, CRIT, addition##_CRIT(n))
+#define DBG_EXCEPTION_PROLOG(n, intnum, addition)			    \
+	EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n))
 
-#define DBG_EXCEPTION_PROLOG(n, addition)				    \
-	EXCEPTION_PROLOG(n, DBG, addition##_DBG(n))
+#define MC_EXCEPTION_PROLOG(n, intnum, addition)			    \
+	EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n))
 
-#define MC_EXCEPTION_PROLOG(n, addition)				    \
-	EXCEPTION_PROLOG(n, MC, addition##_MC(n))
+#define GDBELL_EXCEPTION_PROLOG(n, intnum, addition)			    \
+	EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n))
 
+/*
+ * Store user-visible scratch in PACA exception slots and restore proper value
+ */
+#define PROLOG_STORE_RESTORE_SCRATCH_GEN
+#define PROLOG_STORE_RESTORE_SCRATCH_GDBELL
+#define PROLOG_STORE_RESTORE_SCRATCH_DBG
+#define PROLOG_STORE_RESTORE_SCRATCH_MC
+
+#define PROLOG_STORE_RESTORE_SCRATCH_CRIT				    \
+	mfspr	r10,SPRN_SPRG_CRIT_SCRATCH;	/* get r13 */		    \
+	std	r10,PACA_EXCRIT+EX_R13(r13);				    \
+	ld	r11,PACA_SPRG3(r13);					    \
+	mtspr	SPRN_SPRG_CRIT_SCRATCH,r11;
 
 /* Variants of the "addition" argument for the prolog
  */
 #define PROLOG_ADDITION_NONE_GEN(n)
+#define PROLOG_ADDITION_NONE_GDBELL(n)
 #define PROLOG_ADDITION_NONE_CRIT(n)
 #define PROLOG_ADDITION_NONE_DBG(n)
 #define PROLOG_ADDITION_NONE_MC(n)
 
 #define PROLOG_ADDITION_MASKABLE_GEN(n)					    \
-	lbz	r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */	    \
-	cmpwi	cr0,r11,0;		/* yes -> go out of line */	    \
+	lbz	r10,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */	    \
+	cmpwi	cr0,r10,0;		/* yes -> go out of line */	    \
 	beq	masked_interrupt_book3e_##n
 
 #define PROLOG_ADDITION_2REGS_GEN(n)					    \
@@ -233,9 +258,9 @@ exc_##n##_bad_stack:							    \
 1:
 
 
-#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack)			\
+#define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack)		\
 	START_EXCEPTION(label);						\
-	NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE)	\
+	NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\
 	EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE)		\
 	ack(r8);							\
 	CHECK_NAPPING();						\
@@ -286,7 +311,8 @@ interrupt_end_book3e:
 
 /* Critical Input Interrupt */
 	START_EXCEPTION(critical_input);
-	CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
+	CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
+			      PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE)
 //	bl	special_reg_save_crit
 //	CHECK_NAPPING();
@@ -297,7 +323,8 @@ interrupt_end_book3e:
 
 /* Machine Check Interrupt */
 	START_EXCEPTION(machine_check);
-	CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
+	MC_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_MACHINE_CHECK,
+			    PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE)
 //	bl	special_reg_save_mc
 //	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -308,7 +335,8 @@ interrupt_end_book3e:
 
 /* Data Storage Interrupt */
 	START_EXCEPTION(data_storage)
-	NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
+	NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE,
+				PROLOG_ADDITION_2REGS)
 	mfspr	r14,SPRN_DEAR
 	mfspr	r15,SPRN_ESR
 	EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_DISABLE)
@@ -316,18 +344,21 @@ interrupt_end_book3e:
 
 /* Instruction Storage Interrupt */
 	START_EXCEPTION(instruction_storage);
-	NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
+	NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE,
+				PROLOG_ADDITION_2REGS)
 	li	r15,0
 	mr	r14,r10
 	EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_DISABLE)
 	b	storage_fault_common
 
 /* External Input Interrupt */
-	MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
+	MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
+			   external_input, .do_IRQ, ACK_NONE)
 
 /* Alignment */
 	START_EXCEPTION(alignment);
-	NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
+	NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT,
+				PROLOG_ADDITION_2REGS)
 	mfspr	r14,SPRN_DEAR
 	mfspr	r15,SPRN_ESR
 	EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
@@ -335,7 +366,8 @@ interrupt_end_book3e:
 
 /* Program Interrupt */
 	START_EXCEPTION(program);
-	NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
+	NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM,
+				PROLOG_ADDITION_1REG)
 	mfspr	r14,SPRN_ESR
 	EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE)
 	std	r14,_DSISR(r1)
@@ -347,7 +379,8 @@ interrupt_end_book3e:
 
 /* Floating Point Unavailable Interrupt */
 	START_EXCEPTION(fp_unavailable);
-	NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
+	NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL,
+				PROLOG_ADDITION_NONE)
 	/* we can probably do a shorter exception entry for that one... */
 	EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
 	ld	r12,_MSR(r1)
@@ -362,14 +395,17 @@ interrupt_end_book3e:
 	b	.ret_from_except
 
 /* Decrementer Interrupt */
-	MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
+	MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
+			   decrementer, .timer_interrupt, ACK_DEC)
 
 /* Fixed Interval Timer Interrupt */
-	MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
+	MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
+			   fixed_interval, .unknown_exception, ACK_FIT)
 
 /* Watchdog Timer Interrupt */
 	START_EXCEPTION(watchdog);
-	CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
+	CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
+			      PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE)
 //	bl	special_reg_save_crit
 //	CHECK_NAPPING();
@@ -388,7 +424,8 @@ interrupt_end_book3e:
 
 /* Auxiliary Processor Unavailable Interrupt */
 	START_EXCEPTION(ap_unavailable);
-	NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
+	NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL,
+				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_DISABLE)
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -397,7 +434,8 @@ interrupt_end_book3e:
 
 /* Debug exception as a critical interrupt*/
 	START_EXCEPTION(debug_crit);
-	CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+	CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
+			      PROLOG_ADDITION_2REGS)
 
 	/*
 	 * If there is a single step or branch-taken exception in an
@@ -431,7 +469,7 @@ interrupt_end_book3e:
 	mtcr	r10
 	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
 	ld	r11,PACA_EXCRIT+EX_R11(r13)
-	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
+	ld	r13,PACA_EXCRIT+EX_R13(r13)
 	rfci
 
 	/* Normal debug exception */
@@ -444,7 +482,7 @@ interrupt_end_book3e:
 	/* Now we mash up things to make it look like we are coming on a
 	 * normal exception
 	 */
-	mfspr	r15,SPRN_SPRG_CRIT_SCRATCH
+	ld	r15,PACA_EXCRIT+EX_R13(r13)
 	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
 	mfspr	r14,SPRN_DBSR
 	EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE)
@@ -462,7 +500,8 @@ kernel_dbg_exc:
 
 /* Debug exception as a debug interrupt*/
 	START_EXCEPTION(debug_debug);
-	DBG_EXCEPTION_PROLOG(0xd08, PROLOG_ADDITION_2REGS)
+	DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
+						 PROLOG_ADDITION_2REGS)
 
 	/*
 	 * If there is a single step or branch-taken exception in an
@@ -523,18 +562,21 @@ kernel_dbg_exc:
 	b	.ret_from_except
 
 	START_EXCEPTION(perfmon);
-	NORMAL_EXCEPTION_PROLOG(0x260, PROLOG_ADDITION_NONE)
+	NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
+				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x260, PACA_EXGEN, INTS_DISABLE)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.performance_monitor_exception
 	b	.ret_from_except_lite
 
 /* Doorbell interrupt */
-	MASKABLE_EXCEPTION(0x280, doorbell, .doorbell_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
+			   doorbell, .doorbell_exception, ACK_NONE)
 
 /* Doorbell critical Interrupt */
 	START_EXCEPTION(doorbell_crit);
-	CRIT_EXCEPTION_PROLOG(0x2a0, PROLOG_ADDITION_NONE)
+	CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
+			      PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x2a0, PACA_EXCRIT, INTS_DISABLE)
 //	bl	special_reg_save_crit
 //	CHECK_NAPPING();
@@ -543,12 +585,24 @@ kernel_dbg_exc:
 //	b	ret_from_crit_except
 	b	.
 
-/* Guest Doorbell */
-	MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE)
+/*
+ *	Guest doorbell interrupt
+ *	This general exception use GSRRx save/restore registers
+ */
+	START_EXCEPTION(guest_doorbell);
+	GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL,
+			        PROLOG_ADDITION_NONE)
+	EXCEPTION_COMMON(0x2c0, PACA_EXGEN, INTS_KEEP)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.unknown_exception
+	b	.ret_from_except
 
 /* Guest Doorbell critical Interrupt */
 	START_EXCEPTION(guest_doorbell_crit);
-	CRIT_EXCEPTION_PROLOG(0x2e0, PROLOG_ADDITION_NONE)
+	CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
+			      PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x2e0, PACA_EXCRIT, INTS_DISABLE)
 //	bl	special_reg_save_crit
 //	CHECK_NAPPING();
@@ -559,7 +613,8 @@ kernel_dbg_exc:
 
 /* Hypervisor call */
 	START_EXCEPTION(hypercall);
-	NORMAL_EXCEPTION_PROLOG(0x310, PROLOG_ADDITION_NONE)
+	NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL,
+			        PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x310, PACA_EXGEN, INTS_KEEP)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.save_nvgprs
@@ -569,7 +624,8 @@ kernel_dbg_exc:
 
 /* Embedded Hypervisor priviledged  */
 	START_EXCEPTION(ehpriv);
-	NORMAL_EXCEPTION_PROLOG(0x320, PROLOG_ADDITION_NONE)
+	NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV,
+			        PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x320, PACA_EXGEN, INTS_KEEP)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.save_nvgprs
@@ -582,44 +638,42 @@ kernel_dbg_exc:
  * accordingly and if the interrupt is level sensitive, we hard disable
  */
 
+.macro masked_interrupt_book3e paca_irq full_mask
+	lbz	r10,PACAIRQHAPPENED(r13)
+	ori	r10,r10,\paca_irq
+	stb	r10,PACAIRQHAPPENED(r13)
+
+	.if \full_mask == 1
+	rldicl	r10,r11,48,1		/* clear MSR_EE */
+	rotldi	r11,r10,16
+	mtspr	SPRN_SRR1,r11
+	.endif
+
+	lwz	r11,PACA_EXGEN+EX_CR(r13)
+	mtcr	r11
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
+	rfi
+	b	.
+.endm
+
 masked_interrupt_book3e_0x500:
-	/* XXX When adding support for EPR, use PACA_IRQ_EE_EDGE */
-	li	r11,PACA_IRQ_EE
-	b	masked_interrupt_book3e_full_mask
+	// XXX When adding support for EPR, use PACA_IRQ_EE_EDGE
+	masked_interrupt_book3e PACA_IRQ_EE 1
 
 masked_interrupt_book3e_0x900:
-	ACK_DEC(r11);
-	li	r11,PACA_IRQ_DEC
-	b	masked_interrupt_book3e_no_mask
+	ACK_DEC(r10);
+	masked_interrupt_book3e PACA_IRQ_DEC 0
+
 masked_interrupt_book3e_0x980:
-	ACK_FIT(r11);
-	li	r11,PACA_IRQ_DEC
-	b	masked_interrupt_book3e_no_mask
+	ACK_FIT(r10);
+	masked_interrupt_book3e PACA_IRQ_DEC 0
+
 masked_interrupt_book3e_0x280:
 masked_interrupt_book3e_0x2c0:
-	li	r11,PACA_IRQ_DBELL
-	b	masked_interrupt_book3e_no_mask
+	masked_interrupt_book3e PACA_IRQ_DBELL 0
 
-masked_interrupt_book3e_no_mask:
-	mtcr	r10
-	lbz	r10,PACAIRQHAPPENED(r13)
-	or	r10,r10,r11
-	stb	r10,PACAIRQHAPPENED(r13)
-	b	1f
-masked_interrupt_book3e_full_mask:
-	mtcr	r10
-	lbz	r10,PACAIRQHAPPENED(r13)
-	or	r10,r10,r11
-	stb	r10,PACAIRQHAPPENED(r13)
-	mfspr	r10,SPRN_SRR1
-	rldicl	r11,r10,48,1		/* clear MSR_EE */
-	rotldi	r10,r11,16
-	mtspr	SPRN_SRR1,r10
-1:	ld	r10,PACA_EXGEN+EX_R10(r13);
-	ld	r11,PACA_EXGEN+EX_R11(r13);
-	mfspr	r13,SPRN_SPRG_GEN_SCRATCH;
-	rfi
-	b	.
 /*
  * Called from arch_local_irq_enable when an interrupt needs
  * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280
@@ -1302,25 +1356,11 @@ _GLOBAL(setup_perfmon_ivor)
 _GLOBAL(setup_doorbell_ivors)
 	SET_IVOR(36, 0x280) /* Processor Doorbell */
 	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
-
-	/* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
-	mfspr	r10,SPRN_MMUCFG
-	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
-	beqlr
-
-	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
-	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
 	blr
 
 _GLOBAL(setup_ehv_ivors)
-	/*
-	 * We may be running as a guest and lack E.HV even on a chip
-	 * that normally has it.
-	 */
-	mfspr	r10,SPRN_MMUCFG
-	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
-	beqlr
-
 	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
 	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
+	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
+	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
 	blr
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e894515e77bb..10b658ad65e1 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -186,7 +186,7 @@ hardware_interrupt_hv:
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
 
 	MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
-	MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer)
+	STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
 
 	STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
@@ -275,6 +275,31 @@ vsx_unavailable_pSeries_1:
 	STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
 	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
 
+	. = 0x1500
+	.global denorm_Hypervisor
+denorm_exception_hv:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG_HSCRATCH0,r13
+	mfspr	r13,SPRN_SPRG_HPACA
+	std	r9,PACA_EXGEN+EX_R9(r13)
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r9,SPRN_SPRG_HSCRATCH0
+	std	r9,PACA_EXGEN+EX_R13(r13)
+	mfcr	r9
+
+#ifdef CONFIG_PPC_DENORMALISATION
+	mfspr	r10,SPRN_HSRR1
+	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
+	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
+	addi	r11,r11,-4		/* HSRR0 is next instruction */
+	bne+	denorm_assist
+#endif
+
+	EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500)
+
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
@@ -336,6 +361,103 @@ do_stab_bolted_pSeries:
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x900)
 	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982)
 
+#ifdef CONFIG_PPC_DENORMALISATION
+denorm_assist:
+BEGIN_FTR_SECTION
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER6 do that here for all FP regs.
+ */
+	mfmsr	r10
+	ori	r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
+	xori	r10,r10,(MSR_FE0|MSR_FE1)
+	mtmsrd	r10
+	sync
+	fmr	0,0
+	fmr	1,1
+	fmr	2,2
+	fmr	3,3
+	fmr	4,4
+	fmr	5,5
+	fmr	6,6
+	fmr	7,7
+	fmr	8,8
+	fmr	9,9
+	fmr	10,10
+	fmr	11,11
+	fmr	12,12
+	fmr	13,13
+	fmr	14,14
+	fmr	15,15
+	fmr	16,16
+	fmr	17,17
+	fmr	18,18
+	fmr	19,19
+	fmr	20,20
+	fmr	21,21
+	fmr	22,22
+	fmr	23,23
+	fmr	24,24
+	fmr	25,25
+	fmr	26,26
+	fmr	27,27
+	fmr	28,28
+	fmr	29,29
+	fmr	30,30
+	fmr	31,31
+FTR_SECTION_ELSE
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER7 do that here for the first 32 VSX registers only.
+ */
+	mfmsr	r10
+	oris	r10,r10,MSR_VSX@h
+	mtmsrd	r10
+	sync
+	XVCPSGNDP(0,0,0)
+	XVCPSGNDP(1,1,1)
+	XVCPSGNDP(2,2,2)
+	XVCPSGNDP(3,3,3)
+	XVCPSGNDP(4,4,4)
+	XVCPSGNDP(5,5,5)
+	XVCPSGNDP(6,6,6)
+	XVCPSGNDP(7,7,7)
+	XVCPSGNDP(8,8,8)
+	XVCPSGNDP(9,9,9)
+	XVCPSGNDP(10,10,10)
+	XVCPSGNDP(11,11,11)
+	XVCPSGNDP(12,12,12)
+	XVCPSGNDP(13,13,13)
+	XVCPSGNDP(14,14,14)
+	XVCPSGNDP(15,15,15)
+	XVCPSGNDP(16,16,16)
+	XVCPSGNDP(17,17,17)
+	XVCPSGNDP(18,18,18)
+	XVCPSGNDP(19,19,19)
+	XVCPSGNDP(20,20,20)
+	XVCPSGNDP(21,21,21)
+	XVCPSGNDP(22,22,22)
+	XVCPSGNDP(23,23,23)
+	XVCPSGNDP(24,24,24)
+	XVCPSGNDP(25,25,25)
+	XVCPSGNDP(26,26,26)
+	XVCPSGNDP(27,27,27)
+	XVCPSGNDP(28,28,28)
+	XVCPSGNDP(29,29,29)
+	XVCPSGNDP(30,30,30)
+	XVCPSGNDP(31,31,31)
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
+	mtspr	SPRN_HSRR0,r11
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
+	ld	r13,PACA_EXGEN+EX_R13(r13)
+	HRFID
+	b	.
+#endif
+
 	.align	7
 	/* moved from 0xe00 */
 	STD_EXCEPTION_HV(., 0xe02, h_data_storage)
@@ -486,6 +608,7 @@ machine_check_common:
 
 	STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
 	STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
+	STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
 	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
@@ -494,6 +617,7 @@ machine_check_common:
         STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
 	STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
 	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
+	STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
 #ifdef CONFIG_ALTIVEC
 	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
 #else
@@ -959,7 +1083,9 @@ _GLOBAL(do_stab_bolted)
 	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
 
 	/* Calculate VSID */
-	/* This is a kernel address, so protovsid = ESID */
+	/* This is a kernel address, so protovsid = ESID | 1 << 37 */
+	li	r9,0x1
+	rldimi  r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
 	ASM_VSID_SCRAMBLE(r11, r9, 256M)
 	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
 
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 18bdf74fa164..06c8202a69cf 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -289,8 +289,7 @@ int __init fadump_reserve_mem(void)
 		else
 			memory_limit = memblock_end_of_DRAM();
 		printk(KERN_INFO "Adjusted memory_limit for firmware-assisted"
-				" dump, now %#016llx\n",
-				(unsigned long long)memory_limit);
+				" dump, now %#016llx\n", memory_limit);
 	}
 	if (memory_limit)
 		memory_boundary = memory_limit;
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 0f59863c3ade..6f62a737f607 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -895,15 +895,11 @@ _GLOBAL(__setup_e500mc_ivors)
 	mtspr	SPRN_IVOR36,r3
 	li	r3,CriticalDoorbell@l
 	mtspr	SPRN_IVOR37,r3
+	sync
+	blr
 
-	/*
-	 * We only want to touch IVOR38-41 if we're running on hardware
-	 * that supports category E.HV.  The architectural way to determine
-	 * this is MMUCFG[LPIDSIZE].
-	 */
-	mfspr	r3, SPRN_MMUCFG
-	andis.	r3, r3, MMUCFG_LPIDSIZE@h
-	beq	no_hv
+/* setup ehv ivors for */
+_GLOBAL(__setup_ehv_ivors)
 	li	r3,GuestDoorbell@l
 	mtspr	SPRN_IVOR38,r3
 	li	r3,CriticalGuestDoorbell@l
@@ -912,14 +908,8 @@ _GLOBAL(__setup_e500mc_ivors)
 	mtspr	SPRN_IVOR40,r3
 	li	r3,Ehvpriv@l
 	mtspr	SPRN_IVOR41,r3
-skip_hv_ivors:
 	sync
 	blr
-no_hv:
-	lwz	r3, CPU_SPEC_FEATURES(r5)
-	rlwinm	r3, r3, 0, ~CPU_FTR_EMB_HV
-	stw	r3, CPU_SPEC_FEATURES(r5)
-	b	skip_hv_ivors
 
 #ifdef CONFIG_SPE
 /*
@@ -1043,6 +1033,34 @@ _GLOBAL(flush_dcache_L1)
 
 	blr
 
+/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
+_GLOBAL(__flush_disable_L1)
+	mflr	r10
+	bl	flush_dcache_L1	/* Flush L1 d-cache */
+	mtlr	r10
+
+	mfspr	r4, SPRN_L1CSR0	/* Invalidate and disable d-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r4
+	isync
+
+1:	mfspr	r4, SPRN_L1CSR0	/* Wait for the invalidate to finish */
+	andi.	r4, r4, 2
+	bne	1b
+
+	mfspr	r4, SPRN_L1CSR1	/* Invalidate and disable i-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	mtspr	SPRN_L1CSR1, r4
+	isync
+
+	blr
+
 #ifdef CONFIG_SMP
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index f3a82dde61db..a89cae481b04 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -73,7 +73,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 	 * If so, DABR will be populated in single_step_dabr_instruction().
 	 */
 	if (current->thread.last_hit_ubp != bp)
-		set_dabr(info->address | info->type | DABR_TRANSLATION);
+		set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx);
 
 	return 0;
 }
@@ -97,7 +97,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 	}
 
 	*slot = NULL;
-	set_dabr(0);
+	set_dabr(0, 0);
 }
 
 /*
@@ -170,6 +170,13 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 
 	info->address = bp->attr.bp_addr;
 	info->len = bp->attr.bp_len;
+	info->dabrx = DABRX_ALL;
+	if (bp->attr.exclude_user)
+		info->dabrx &= ~DABRX_USER;
+	if (bp->attr.exclude_kernel)
+		info->dabrx &= ~DABRX_KERNEL;
+	if (bp->attr.exclude_hv)
+		info->dabrx &= ~DABRX_HYP;
 
 	/*
 	 * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8)
@@ -197,7 +204,7 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
 
 	info = counter_arch_bp(tsk->thread.last_hit_ubp);
 	regs->msr &= ~MSR_SE;
-	set_dabr(info->address | info->type | DABR_TRANSLATION);
+	set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx);
 	tsk->thread.last_hit_ubp = NULL;
 }
 
@@ -215,7 +222,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
 	unsigned long dar = regs->dar;
 
 	/* Disable breakpoints during exception handling */
-	set_dabr(0);
+	set_dabr(0, 0);
 
 	/*
 	 * The counter may be concurrently released but that can only
@@ -253,7 +260,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
 
 	/* Do not emulate user-space instructions, instead single-step them */
 	if (user_mode(regs)) {
-		bp->ctx->task->thread.last_hit_ubp = bp;
+		current->thread.last_hit_ubp = bp;
 		regs->msr |= MSR_SE;
 		goto out;
 	}
@@ -281,7 +288,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
 	if (!info->extraneous_interrupt)
 		perf_bp_event(bp, regs);
 
-	set_dabr(info->address | info->type | DABR_TRANSLATION);
+	set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx);
 out:
 	rcu_read_unlock();
 	return rc;
@@ -294,7 +301,7 @@ int __kprobes single_step_dabr_instruction(struct die_args *args)
 {
 	struct pt_regs *regs = args->regs;
 	struct perf_event *bp = NULL;
-	struct arch_hw_breakpoint *bp_info;
+	struct arch_hw_breakpoint *info;
 
 	bp = current->thread.last_hit_ubp;
 	/*
@@ -304,16 +311,16 @@ int __kprobes single_step_dabr_instruction(struct die_args *args)
 	if (!bp)
 		return NOTIFY_DONE;
 
-	bp_info = counter_arch_bp(bp);
+	info = counter_arch_bp(bp);
 
 	/*
 	 * We shall invoke the user-defined callback function in the single
 	 * stepping handler to confirm to 'trigger-after-execute' semantics
 	 */
-	if (!bp_info->extraneous_interrupt)
+	if (!info->extraneous_interrupt)
 		perf_bp_event(bp, regs);
 
-	set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION);
+	set_dabr(info->address | info->type | DABR_TRANSLATION, info->dabrx);
 	current->thread.last_hit_ubp = NULL;
 
 	/*
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index b01d14eeca8d..8220baa46faf 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -47,7 +47,6 @@
 #include <linux/stat.h>
 #include <linux/of_platform.h>
 #include <asm/ibmebus.h>
-#include <asm/abs_addr.h>
 
 static struct device ibmebus_bus_device = { /* fake "parent" device */
 	.init_name = "ibmebus",
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 7140d838339e..e11863f4e595 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -28,7 +28,9 @@ _GLOBAL(power7_idle)
 	lwz	r4,ADDROFF(powersave_nap)(r3)
 	cmpwi	0,r4,0
 	beqlr
+	/* fall through */
 
+_GLOBAL(power7_nap)
 	/* NAP is a state loss, we create a regs frame on the
 	 * stack, fill it up with the state we care about and
 	 * stick a pointer to it in PACAR1. We really only
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index ff5a6ce027b8..8226c6cb348a 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -215,7 +215,8 @@ static unsigned long iommu_range_alloc(struct device *dev,
 	spin_lock_irqsave(&(pool->lock), flags);
 
 again:
-	if ((pass == 0) && handle && *handle)
+	if ((pass == 0) && handle && *handle &&
+	    (*handle >= pool->start) && (*handle < pool->end))
 		start = *handle;
 	else
 		start = pool->hint;
@@ -236,7 +237,9 @@ again:
 		 * but on second pass, start at 0 in pool 0.
 		 */
 		if ((start & mask) >= limit || pass > 0) {
+			spin_unlock(&(pool->lock));
 			pool = &(tbl->pools[0]);
+			spin_lock(&(pool->lock));
 			start = pool->start;
 		} else {
 			start &= mask;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1f017bb7a7ce..71413f41278f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -489,10 +489,10 @@ void do_IRQ(struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	unsigned int irq;
 
-	trace_irq_entry(regs);
-
 	irq_enter();
 
+	trace_irq_entry(regs);
+
 	check_stack_overflow();
 
 	/*
@@ -511,10 +511,10 @@ void do_IRQ(struct pt_regs *regs)
 	else
 		__get_cpu_var(irq_stat).spurious_irqs++;
 
+	trace_irq_exit(regs);
+
 	irq_exit();
 	set_irq_regs(old_regs);
-
-	trace_irq_exit(regs);
 }
 
 void __init init_IRQ(void)
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 782bd0a3c2f0..c470a40b29f5 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -25,6 +25,7 @@
 #include <asm/processor.h>
 #include <asm/machdep.h>
 #include <asm/debug.h>
+#include <linux/slab.h>
 
 /*
  * This table contains the mapping between PowerPC hardware trap types, and
@@ -101,6 +102,21 @@ static int computeSignal(unsigned int tt)
 	return SIGHUP;		/* default for things we don't know about */
 }
 
+/**
+ *
+ *	kgdb_skipexception - Bail out of KGDB when we've been triggered.
+ *	@exception: Exception vector number
+ *	@regs: Current &struct pt_regs.
+ *
+ *	On some architectures we need to skip a breakpoint exception when
+ *	it occurs after a breakpoint has been removed.
+ *
+ */
+int kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+	return kgdb_isremovedbreak(regs->nip);
+}
+
 static int kgdb_call_nmi_hook(struct pt_regs *regs)
 {
 	kgdb_nmicallback(raw_smp_processor_id(), regs);
@@ -138,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
+	struct thread_info *backup_current_thread_info = \
+		(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 
 	if (user_mode(regs))
 		return 0;
@@ -155,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs)
 	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
 	exception_thread_info = current_thread_info();
 
-	if (thread_info != exception_thread_info)
+	if (thread_info != exception_thread_info) {
+		/* Save the original current_thread_info. */
+		memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info);
 		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+	}
 
 	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 
 	if (thread_info != exception_thread_info)
-		memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+		/* Restore current_thread_info lastly. */
+		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
 	return 1;
 }
@@ -410,7 +432,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 #else
 			linux_regs->msr |= MSR_SE;
 #endif
-			kgdb_single_step = 1;
 			atomic_set(&kgdb_cpu_doing_single_step,
 				   raw_smp_processor_id());
 		}
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 5df777794403..fa9f6c72f557 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -165,7 +165,7 @@ void __init reserve_crashkernel(void)
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
 		printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
-		       (unsigned long long)memory_limit);
+		       memory_limit);
 	}
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
@@ -204,6 +204,12 @@ static struct property crashk_size_prop = {
 	.value = &crashk_size,
 };
 
+static struct property memory_limit_prop = {
+	.name = "linux,memory-limit",
+	.length = sizeof(unsigned long long),
+	.value = &memory_limit,
+};
+
 static void __init export_crashk_values(struct device_node *node)
 {
 	struct property *prop;
@@ -223,6 +229,12 @@ static void __init export_crashk_values(struct device_node *node)
 		crashk_size = resource_size(&crashk_res);
 		prom_add_property(node, &crashk_size_prop);
 	}
+
+	/*
+	 * memory_limit is required by the kexec-tools to limit the
+	 * crash regions to the actual memory used.
+	 */
+	prom_update_property(node, &memory_limit_prop);
 }
 
 static int __init kexec_setup(void)
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index fbe1a12dc7f1..cd6da855090c 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -142,6 +142,7 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 	new_paca->hw_cpu_id = 0xffff;
 	new_paca->kexec_state = KEXEC_STATE_NONE;
 	new_paca->__current = &init_task;
+	new_paca->data_offset = 0xfeeeeeeeeeeeeeeeULL;
 #ifdef CONFIG_PPC_STD_MMU_64
 	new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 #endif /* CONFIG_PPC_STD_MMU_64 */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 2aa04f29e1de..7f94f760dd0c 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -99,6 +99,26 @@ void pcibios_free_controller(struct pci_controller *phb)
 		kfree(phb);
 }
 
+/*
+ * The function is used to return the minimal alignment
+ * for memory or I/O windows of the associated P2P bridge.
+ * By default, 4KiB alignment for I/O windows and 1MiB for
+ * memory windows.
+ */
+resource_size_t pcibios_window_alignment(struct pci_bus *bus,
+					 unsigned long type)
+{
+	if (ppc_md.pcibios_window_alignment)
+		return ppc_md.pcibios_window_alignment(bus, type);
+
+	/*
+	 * PCI core will figure out the default
+	 * alignment: 4KiB for I/O and 1MiB for
+	 * memory window.
+	 */
+	return 1;
+}
+
 static resource_size_t pcibios_io_size(const struct pci_controller *hose)
 {
 #ifdef CONFIG_PPC64
@@ -960,13 +980,14 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
 		if (i >= 3 && bus->self->transparent)
 			continue;
 
-		/* If we are going to re-assign everything, mark the resource
-		 * as unset and move it down to 0
+		/* If we're going to reassign everything, we can
+		 * shrink the P2P resource to have size as being
+		 * of 0 in order to save space.
 		 */
 		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
 			res->flags |= IORESOURCE_UNSET;
-			res->end -= res->start;
 			res->start = 0;
+			res->end = -1;
 			continue;
 		}
 
@@ -1228,7 +1249,14 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 		pr_warning("PCI: Cannot allocate resource region "
 			   "%d of PCI bridge %d, will remap\n", i, bus->number);
 	clear_resource:
-		res->start = res->end = 0;
+		/* The resource might be figured out when doing
+		 * reassignment based on the resources required
+		 * by the downstream PCI devices. Here we set
+		 * the size of the resource to be 0 in order to
+		 * save more space.
+		 */
+		res->start = 0;
+		res->end = -1;
 		res->flags = 0;
 	}
 
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
index dc16aefe1dd0..02fb0ee26093 100644
--- a/arch/powerpc/kernel/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -16,57 +16,6 @@
 
 /* These are here to support 32-bit syscalls on a 64-bit kernel. */
 
-typedef struct compat_siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[SI_PAD_SIZE32];
-
-		/* kill() */
-		struct {
-			compat_pid_t _pid;		/* sender's pid */
-			compat_uid_t _uid;		/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;			/* timer id */
-			int _overrun;			/* overrun count */
-			compat_sigval_t _sigval;		/* same as below */
-			int _sys_private;		/* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			compat_pid_t _pid;		/* sender's pid */
-			compat_uid_t _uid;		/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			compat_pid_t _pid;		/* which child */
-			compat_uid_t _uid;		/* sender's uid */
-			int _status;			/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */
-		struct {
-			unsigned int _addr; /* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} compat_siginfo_t;
-
 #define __old_sigaction32	old_sigaction32
 
 struct __old_sigaction32 {
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 710f400476de..d5ad666efd8b 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -258,6 +258,7 @@ void do_send_trap(struct pt_regs *regs, unsigned long address,
 {
 	siginfo_t info;
 
+	current->thread.trap_nr = signal_code;
 	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
 			11, SIGSEGV) == NOTIFY_STOP)
 		return;
@@ -275,6 +276,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 {
 	siginfo_t info;
 
+	current->thread.trap_nr = TRAP_HWBKPT;
 	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
 			11, SIGSEGV) == NOTIFY_STOP)
 		return;
@@ -283,7 +285,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 		return;
 
 	/* Clear the DABR */
-	set_dabr(0);
+	set_dabr(0, 0);
 
 	/* Deliver the signal to userspace */
 	info.si_signo = SIGTRAP;
@@ -364,18 +366,19 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
 {
 	if (thread->dabr) {
 		thread->dabr = 0;
-		set_dabr(0);
+		thread->dabrx = 0;
+		set_dabr(0, 0);
 	}
 }
 #endif /* !CONFIG_HAVE_HW_BREAKPOINT */
 #endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
 
-int set_dabr(unsigned long dabr)
+int set_dabr(unsigned long dabr, unsigned long dabrx)
 {
 	__get_cpu_var(current_dabr) = dabr;
 
 	if (ppc_md.set_dabr)
-		return ppc_md.set_dabr(dabr);
+		return ppc_md.set_dabr(dabr, dabrx);
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
@@ -385,9 +388,8 @@ int set_dabr(unsigned long dabr)
 #endif
 #elif defined(CONFIG_PPC_BOOK3S)
 	mtspr(SPRN_DABR, dabr);
+	mtspr(SPRN_DABRX, dabrx);
 #endif
-
-
 	return 0;
 }
 
@@ -480,7 +482,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
  */
 #ifndef CONFIG_HAVE_HW_BREAKPOINT
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
-		set_dabr(new->thread.dabr);
+		set_dabr(new->thread.dabr, new->thread.dabrx);
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 
@@ -514,9 +516,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 	local_irq_save(flags);
 
-	account_system_vtime(current);
-	account_process_vtime(current);
-
 	/*
 	 * We can't take a PMU exception inside _switch() since there is a
 	 * window where the kernel stack SLB and the kernel stack are out
@@ -802,16 +801,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #endif /* CONFIG_PPC_STD_MMU_64 */
 #ifdef CONFIG_PPC64 
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
-		if (current->thread.dscr_inherit) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = current->thread.dscr;
-		} else if (0 != dscr_default) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = dscr_default;
-		} else {
-			p->thread.dscr_inherit = 0;
-			p->thread.dscr = 0;
-		}
+		p->thread.dscr_inherit = current->thread.dscr_inherit;
+		p->thread.dscr = current->thread.dscr;
 	}
 #endif
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index f191bf02943a..37725e86651e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -78,7 +78,7 @@ static int __init early_parse_mem(char *p)
 		return 1;
 
 	memory_limit = PAGE_ALIGN(memparse(p, &p));
-	DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
+	DBG("memory limit = 0x%llx\n", memory_limit);
 
 	return 0;
 }
@@ -661,7 +661,7 @@ void __init early_init_devtree(void *params)
 
 	/* make sure we've parsed cmdline for mem= before this */
 	if (memory_limit)
-		first_memblock_size = min(first_memblock_size, memory_limit);
+		first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
 	setup_initial_memory_limit(memstart_addr, first_memblock_size);
 	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
 	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 0794a3017b1b..cb6c123722a2 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -705,6 +705,7 @@ static void __init early_cmdline_parse(void)
 #endif
 #define OV5_TYPE1_AFFINITY	0x80	/* Type 1 NUMA affinity */
 #define OV5_PFO_HW_RNG		0x80	/* PFO Random Number Generator */
+#define OV5_PFO_HW_842		0x40	/* PFO Compression Accelerator */
 #define OV5_PFO_HW_ENCR		0x20	/* PFO Encryption Accelerator */
 
 /* Option Vector 6: IBM PAPR hints */
@@ -774,8 +775,7 @@ static unsigned char ibm_architecture_vec[] = {
 	0,
 	0,
 	0,
-	OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR,
-
+	OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR | OV5_PFO_HW_842,
 	/* option vector 6: IBM PAPR hints */
 	4 - 2,				/* length */
 	0,
@@ -1624,6 +1624,63 @@ static void __init prom_instantiate_rtas(void)
 
 #ifdef CONFIG_PPC64
 /*
+ * Allocate room for and instantiate Stored Measurement Log (SML)
+ */
+static void __init prom_instantiate_sml(void)
+{
+	phandle ibmvtpm_node;
+	ihandle ibmvtpm_inst;
+	u32 entry = 0, size = 0;
+	u64 base;
+
+	prom_debug("prom_instantiate_sml: start...\n");
+
+	ibmvtpm_node = call_prom("finddevice", 1, 1, ADDR("/ibm,vtpm"));
+	prom_debug("ibmvtpm_node: %x\n", ibmvtpm_node);
+	if (!PHANDLE_VALID(ibmvtpm_node))
+		return;
+
+	ibmvtpm_inst = call_prom("open", 1, 1, ADDR("/ibm,vtpm"));
+	if (!IHANDLE_VALID(ibmvtpm_inst)) {
+		prom_printf("opening vtpm package failed (%x)\n", ibmvtpm_inst);
+		return;
+	}
+
+	if (call_prom_ret("call-method", 2, 2, &size,
+			  ADDR("sml-get-handover-size"),
+			  ibmvtpm_inst) != 0 || size == 0) {
+		prom_printf("SML get handover size failed\n");
+		return;
+	}
+
+	base = alloc_down(size, PAGE_SIZE, 0);
+	if (base == 0)
+		prom_panic("Could not allocate memory for sml\n");
+
+	prom_printf("instantiating sml at 0x%x...", base);
+
+	if (call_prom_ret("call-method", 4, 2, &entry,
+			  ADDR("sml-handover"),
+			  ibmvtpm_inst, size, base) != 0 || entry == 0) {
+		prom_printf("SML handover failed\n");
+		return;
+	}
+	prom_printf(" done\n");
+
+	reserve_mem(base, size);
+
+	prom_setprop(ibmvtpm_node, "/ibm,vtpm", "linux,sml-base",
+		     &base, sizeof(base));
+	prom_setprop(ibmvtpm_node, "/ibm,vtpm", "linux,sml-size",
+		     &size, sizeof(size));
+
+	prom_debug("sml base     = 0x%x\n", base);
+	prom_debug("sml size     = 0x%x\n", (long)size);
+
+	prom_debug("prom_instantiate_sml: end...\n");
+}
+
+/*
  * Allocate room for and initialize TCE tables
  */
 static void __init prom_initialize_tce_table(void)
@@ -1691,7 +1748,7 @@ static void __init prom_initialize_tce_table(void)
 		 * else will impact performance, so we always allocate 8MB.
 		 * Anton
 		 */
-		if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p))
+		if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p))
 			minsize = 8UL << 20;
 		else
 			minsize = 4UL << 20;
@@ -2916,6 +2973,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 		prom_instantiate_opal();
 #endif
 
+#ifdef CONFIG_PPC64
+	/* instantiate sml */
+	prom_instantiate_sml();
+#endif
+
 	/*
 	 * On non-powermacs, put all CPUs in spin-loops.
 	 *
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index c10fc28b9092..79d8e56470df 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -960,6 +960,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 		thread->ptrace_bps[0] = bp;
 		ptrace_put_breakpoints(task);
 		thread->dabr = data;
+		thread->dabrx = DABRX_ALL;
 		return 0;
 	}
 
@@ -983,6 +984,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 	/* Move contents to the DABR register */
 	task->thread.dabr = data;
+	task->thread.dabrx = DABRX_ALL;
 #else /* CONFIG_PPC_ADV_DEBUG_REGS */
 	/* As described above, it was assumed 3 bits were passed with the data
 	 *  address, but we will assume only the mode bits will be passed
@@ -1397,6 +1399,7 @@ static long ppc_set_hwdebug(struct task_struct *child,
 		dabr |= DABR_DATA_WRITE;
 
 	child->thread.dabr = dabr;
+	child->thread.dabrx = DABRX_ALL;
 
 	return 1;
 #endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 2c0ee6405633..20b0120db0c3 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -21,7 +21,6 @@
 #include <asm/delay.h>
 #include <asm/uaccess.h>
 #include <asm/rtas.h>
-#include <asm/abs_addr.h>
 
 #define MODULE_VERS "1.0"
 #define MODULE_NAME "rtas_flash"
@@ -582,7 +581,7 @@ static void rtas_flash_firmware(int reboot_type)
 	flist = (struct flash_block_list *)&rtas_data_buf[0];
 	flist->num_blocks = 0;
 	flist->next = rtas_firmware_flash_list;
-	rtas_block_list = virt_to_abs(flist);
+	rtas_block_list = __pa(flist);
 	if (rtas_block_list >= 4UL*1024*1024*1024) {
 		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
 		spin_unlock(&rtas_data_buf_lock);
@@ -596,13 +595,13 @@ static void rtas_flash_firmware(int reboot_type)
 	for (f = flist; f; f = next) {
 		/* Translate data addrs to absolute */
 		for (i = 0; i < f->num_blocks; i++) {
-			f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
+			f->blocks[i].data = (char *)__pa(f->blocks[i].data);
 			image_size += f->blocks[i].length;
 		}
 		next = f->next;
 		/* Don't translate NULL pointer for last entry */
 		if (f->next)
-			f->next = (struct flash_block_list *)virt_to_abs(f->next);
+			f->next = (struct flash_block_list *)__pa(f->next);
 		else
 			f->next = NULL;
 		/* make num_blocks into the version/length field */
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 179af906dcda..6de63e3250bb 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -81,7 +81,7 @@ int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (returnval == EEH_IO_ERROR_VALUE(size) &&
-	    eeh_dn_check_failure (pdn->node, NULL))
+	    eeh_dev_check_failure(of_node_to_eeh_dev(pdn->node)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return PCIBIOS_SUCCESSFUL;
@@ -275,9 +275,6 @@ void __init find_and_init_phbs(void)
 	of_node_put(root);
 	pci_devs_phb_init();
 
-	/* Create EEH devices for all PHBs */
-	eeh_dev_phb_init();
-
 	/*
 	 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
 	 * in chosen.
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 389bd4f0cdb1..efb6a41b3131 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -208,6 +208,8 @@ void __init early_setup(unsigned long dt_ptr)
 
 	/* Fix up paca fields required for the boot cpu */
 	get_paca()->cpu_start = 1;
+	/* Allow percpu accesses to "work" until we setup percpu data */
+	get_paca()->data_offset = 0;
 
 	/* Probe the machine type */
 	probe_machine();
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 5c023c9cf16e..a2dc75793bd5 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <linux/uprobes.h>
 #include <linux/key.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
@@ -130,7 +131,7 @@ static int do_signal(struct pt_regs *regs)
 	 * triggered inside the kernel.
 	 */
 	if (current->thread.dabr)
-		set_dabr(current->thread.dabr);
+		set_dabr(current->thread.dabr, current->thread.dabrx);
 #endif
 	/* Re-enable the breakpoints for the signal stack */
 	thread_change_pc(current, regs);
@@ -157,6 +158,11 @@ static int do_signal(struct pt_regs *regs)
 
 void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
+	if (thread_info_flags & _TIF_UPROBE) {
+		clear_thread_flag(TIF_UPROBE);
+		uprobe_notify_resume(regs);
+	}
+
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0321007086f7..2b952b5386fd 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -102,7 +102,7 @@ int __devinit smp_generic_kick_cpu(int nr)
 	 * Ok it's not there, so it might be soft-unplugged, let's
 	 * try to bring it back
 	 */
-	per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+	generic_set_cpu_up(nr);
 	smp_wmb();
 	smp_send_reschedule(nr);
 #endif /* CONFIG_HOTPLUG_CPU */
@@ -171,7 +171,7 @@ int smp_request_message_ipi(int virq, int msg)
 	}
 #endif
 	err = request_irq(virq, smp_ipi_action[msg],
-			  IRQF_PERCPU | IRQF_NO_THREAD,
+			  IRQF_PERCPU | IRQF_NO_THREAD | IRQF_NO_SUSPEND,
 			  smp_ipi_name[msg], 0);
 	WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
 		virq, smp_ipi_name[msg], err);
@@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
 	char *message = (char *)&info->messages;
 
+	/*
+	 * Order previous accesses before accesses in the IPI handler.
+	 */
+	smp_mb();
 	message[msg] = 1;
-	mb();
+	/*
+	 * cause_ipi functions are required to include a full barrier
+	 * before doing whatever causes the IPI.
+	 */
 	smp_ops->cause_ipi(cpu, info->data);
 }
 
@@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void)
 	mb();	/* order any irq clear */
 
 	do {
-		all = xchg_local(&info->messages, 0);
+		all = xchg(&info->messages, 0);
 
 #ifdef __BIG_ENDIAN
 		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
@@ -406,6 +413,16 @@ void generic_set_cpu_dead(unsigned int cpu)
 	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
 
+/*
+ * The cpu_state should be set to CPU_UP_PREPARE in kick_cpu(), otherwise
+ * the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(),
+ * which makes the delay in generic_cpu_die() not happen.
+ */
+void generic_set_cpu_up(unsigned int cpu)
+{
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+}
+
 int generic_check_cpu_restart(unsigned int cpu)
 {
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 81c570633ead..abd1112da54f 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -143,48 +143,17 @@ long compat_sys_ipc(u32 call, u32 first, u32 second, u32 third, compat_uptr_t pt
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
  * and the register representation of a signed int (msr in 64-bit mode) is performed.
  */
-asmlinkage long compat_sys_sendfile(u32 out_fd, u32 in_fd, compat_off_t __user * offset, u32 count)
+asmlinkage long compat_sys_sendfile_wrapper(u32 out_fd, u32 in_fd,
+					    compat_off_t __user *offset, u32 count)
 {
-	mm_segment_t old_fs = get_fs();
-	int ret;
-	off_t of;
-	off_t __user *up;
-
-	if (offset && get_user(of, offset))
-		return -EFAULT;
-
-	/* The __user pointer cast is valid because of the set_fs() */		
-	set_fs(KERNEL_DS);
-	up = offset ? (off_t __user *) &of : NULL;
-	ret = sys_sendfile((int)out_fd, (int)in_fd, up, count);
-	set_fs(old_fs);
-	
-	if (offset && put_user(of, offset))
-		return -EFAULT;
-		
-	return ret;
+	return compat_sys_sendfile((int)out_fd, (int)in_fd, offset, count);
 }
 
-asmlinkage int compat_sys_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset, s32 count)
+asmlinkage long compat_sys_sendfile64_wrapper(u32 out_fd, u32 in_fd,
+					      compat_loff_t __user *offset, u32 count)
 {
-	mm_segment_t old_fs = get_fs();
-	int ret;
-	loff_t lof;
-	loff_t __user *up;
-	
-	if (offset && get_user(lof, offset))
-		return -EFAULT;
-		
-	/* The __user pointer cast is valid because of the set_fs() */		
-	set_fs(KERNEL_DS);
-	up = offset ? (loff_t __user *) &lof : NULL;
-	ret = sys_sendfile64(out_fd, in_fd, up, count);
-	set_fs(old_fs);
-	
-	if (offset && put_user(lof, offset))
-		return -EFAULT;
-		
-	return ret;
+	return sys_sendfile((int)out_fd, (int)in_fd,
+			    (off_t __user *)offset, count);
 }
 
 long compat_sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index f2496f2faecc..4e3cc47f26b9 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality)
 	long ret;
 
 	if (personality(current->personality) == PER_LINUX32
-	    && personality == PER_LINUX)
-		personality = PER_LINUX32;
+	    && personality(personality) == PER_LINUX)
+		personality = (personality & ~PER_MASK) | PER_LINUX32;
 	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	if (personality(ret) == PER_LINUX32)
+		ret = (ret & ~PER_MASK) | PER_LINUX;
 	return ret;
 }
 #endif
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 3529446c2abd..8302af649219 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -194,6 +194,14 @@ static ssize_t show_dscr_default(struct device *dev,
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
+static void update_dscr(void *dummy)
+{
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = dscr_default;
+		mtspr(SPRN_DSCR, dscr_default);
+	}
+}
+
 static ssize_t __used store_dscr_default(struct device *dev,
 		struct device_attribute *attr, const char *buf,
 		size_t count)
@@ -206,6 +214,8 @@ static ssize_t __used store_dscr_default(struct device *dev,
 		return -EINVAL;
 	dscr_default = val;
 
+	on_each_cpu(update_dscr, NULL, 1);
+
 	return count;
 }
 
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index be171ee73bf8..c9986fd400d8 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -291,13 +291,12 @@ static inline u64 calculate_stolen_time(u64 stop_tb)
  * Account time for a transition between system, hard irq
  * or soft irq state.
  */
-void account_system_vtime(struct task_struct *tsk)
+static u64 vtime_delta(struct task_struct *tsk,
+			u64 *sys_scaled, u64 *stolen)
 {
-	u64 now, nowscaled, delta, deltascaled;
-	unsigned long flags;
-	u64 stolen, udelta, sys_scaled, user_scaled;
+	u64 now, nowscaled, deltascaled;
+	u64 udelta, delta, user_scaled;
 
-	local_irq_save(flags);
 	now = mftb();
 	nowscaled = read_spurr(now);
 	get_paca()->system_time += now - get_paca()->starttime;
@@ -305,7 +304,7 @@ void account_system_vtime(struct task_struct *tsk)
 	deltascaled = nowscaled - get_paca()->startspurr;
 	get_paca()->startspurr = nowscaled;
 
-	stolen = calculate_stolen_time(now);
+	*stolen = calculate_stolen_time(now);
 
 	delta = get_paca()->system_time;
 	get_paca()->system_time = 0;
@@ -322,35 +321,45 @@ void account_system_vtime(struct task_struct *tsk)
 	 * the user ticks get saved up in paca->user_time_scaled to be
 	 * used by account_process_tick.
 	 */
-	sys_scaled = delta;
+	*sys_scaled = delta;
 	user_scaled = udelta;
 	if (deltascaled != delta + udelta) {
 		if (udelta) {
-			sys_scaled = deltascaled * delta / (delta + udelta);
-			user_scaled = deltascaled - sys_scaled;
+			*sys_scaled = deltascaled * delta / (delta + udelta);
+			user_scaled = deltascaled - *sys_scaled;
 		} else {
-			sys_scaled = deltascaled;
+			*sys_scaled = deltascaled;
 		}
 	}
 	get_paca()->user_time_scaled += user_scaled;
 
-	if (in_interrupt() || idle_task(smp_processor_id()) != tsk) {
-		account_system_time(tsk, 0, delta, sys_scaled);
-		if (stolen)
-			account_steal_time(stolen);
-	} else {
-		account_idle_time(delta + stolen);
-	}
-	local_irq_restore(flags);
+	return delta;
+}
+
+void vtime_account_system(struct task_struct *tsk)
+{
+	u64 delta, sys_scaled, stolen;
+
+	delta = vtime_delta(tsk, &sys_scaled, &stolen);
+	account_system_time(tsk, 0, delta, sys_scaled);
+	if (stolen)
+		account_steal_time(stolen);
+}
+
+void vtime_account_idle(struct task_struct *tsk)
+{
+	u64 delta, sys_scaled, stolen;
+
+	delta = vtime_delta(tsk, &sys_scaled, &stolen);
+	account_idle_time(delta + stolen);
 }
-EXPORT_SYMBOL_GPL(account_system_vtime);
 
 /*
  * Transfer the user and system times accumulated in the paca
  * by the exception entry and exit code to the generic process
  * user and system time records.
  * Must be called with interrupts disabled.
- * Assumes that account_system_vtime() has been called recently
+ * Assumes that vtime_account() has been called recently
  * (i.e. since the last entry from usermode) so that
  * get_paca()->user_time_scaled is up to date.
  */
@@ -366,6 +375,12 @@ void account_process_tick(struct task_struct *tsk, int user_tick)
 	account_user_time(tsk, utime, utimescaled);
 }
 
+void vtime_task_switch(struct task_struct *prev)
+{
+	vtime_account(prev);
+	account_process_tick(prev, 0);
+}
+
 #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
 #define calc_cputime_factors()
 #endif
@@ -493,8 +508,6 @@ void timer_interrupt(struct pt_regs * regs)
 	 */
 	may_hard_irq_enable();
 
-	trace_timer_interrupt_entry(regs);
-
 	__get_cpu_var(irq_stat).timer_irqs++;
 
 #if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
@@ -505,6 +518,8 @@ void timer_interrupt(struct pt_regs * regs)
 	old_regs = set_irq_regs(regs);
 	irq_enter();
 
+	trace_timer_interrupt_entry(regs);
+
 	if (test_irq_work_pending()) {
 		clear_irq_work_pending();
 		irq_work_run();
@@ -529,10 +544,19 @@ void timer_interrupt(struct pt_regs * regs)
 	}
 #endif
 
+	trace_timer_interrupt_exit(regs);
+
 	irq_exit();
 	set_irq_regs(old_regs);
+}
 
-	trace_timer_interrupt_exit(regs);
+/*
+ * Hypervisor decrementer interrupts shouldn't occur but are sometimes
+ * left pending on exit from a KVM guest.  We don't need to do anything
+ * to clear them, as they are edge-triggered.
+ */
+void hdec_interrupt(struct pt_regs *regs)
+{
 }
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 158972341a2d..32518401af68 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -251,6 +251,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 	if (arch_irqs_disabled() && !arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
+	current->thread.trap_nr = code;
 	memset(&info, 0, sizeof(info));
 	info.si_signo = signr;
 	info.si_code = code;
@@ -972,8 +973,9 @@ static int emulate_instruction(struct pt_regs *regs)
 			cpu_has_feature(CPU_FTR_DSCR)) {
 		PPC_WARN_EMULATED(mtdscr, regs);
 		rd = (instword >> 21) & 0x1f;
-		mtspr(SPRN_DSCR, regs->gpr[rd]);
+		current->thread.dscr = regs->gpr[rd];
 		current->thread.dscr_inherit = 1;
+		mtspr(SPRN_DSCR, current->thread.dscr);
 		return 0;
 	}
 #endif
diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c
new file mode 100644
index 000000000000..d2d46d1014f8
--- /dev/null
+++ b/arch/powerpc/kernel/uprobes.c
@@ -0,0 +1,184 @@
+/*
+ * User-space Probes (UProbes) for powerpc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2007-2012
+ *
+ * Adapted from the x86 port by Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/uprobes.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+
+#include <asm/sstep.h>
+
+#define UPROBE_TRAP_NR	UINT_MAX
+
+/**
+ * arch_uprobe_analyze_insn
+ * @mm: the probed address space.
+ * @arch_uprobe: the probepoint information.
+ * @addr: vaddr to probe.
+ * Return 0 on success or a -ve number on error.
+ */
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe,
+		struct mm_struct *mm, unsigned long addr)
+{
+	if (addr & 0x03)
+		return -EINVAL;
+
+	/*
+	 * We currently don't support a uprobe on an already
+	 * existing breakpoint instruction underneath
+	 */
+	if (is_trap(auprobe->ainsn))
+		return -ENOTSUPP;
+	return 0;
+}
+
+/*
+ * arch_uprobe_pre_xol - prepare to execute out of line.
+ * @auprobe: the probepoint information.
+ * @regs: reflects the saved user state of current task.
+ */
+int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct arch_uprobe_task *autask = &current->utask->autask;
+
+	autask->saved_trap_nr = current->thread.trap_nr;
+	current->thread.trap_nr = UPROBE_TRAP_NR;
+	regs->nip = current->utask->xol_vaddr;
+	return 0;
+}
+
+/**
+ * uprobe_get_swbp_addr - compute address of swbp given post-swbp regs
+ * @regs: Reflects the saved state of the task after it has hit a breakpoint
+ * instruction.
+ * Return the address of the breakpoint instruction.
+ */
+unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
+{
+	return instruction_pointer(regs);
+}
+
+/*
+ * If xol insn itself traps and generates a signal (SIGILL/SIGSEGV/etc),
+ * then detect the case where a singlestepped instruction jumps back to its
+ * own address. It is assumed that anything like do_page_fault/do_trap/etc
+ * sets thread.trap_nr != UINT_MAX.
+ *
+ * arch_uprobe_pre_xol/arch_uprobe_post_xol save/restore thread.trap_nr,
+ * arch_uprobe_xol_was_trapped() simply checks that ->trap_nr is not equal to
+ * UPROBE_TRAP_NR == UINT_MAX set by arch_uprobe_pre_xol().
+ */
+bool arch_uprobe_xol_was_trapped(struct task_struct *t)
+{
+	if (t->thread.trap_nr != UPROBE_TRAP_NR)
+		return true;
+
+	return false;
+}
+
+/*
+ * Called after single-stepping. To avoid the SMP problems that can
+ * occur when we temporarily put back the original opcode to
+ * single-step, we single-stepped a copy of the instruction.
+ *
+ * This function prepares to resume execution after the single-step.
+ */
+int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR);
+
+	current->thread.trap_nr = utask->autask.saved_trap_nr;
+
+	/*
+	 * On powerpc, except for loads and stores, most instructions
+	 * including ones that alter code flow (branches, calls, returns)
+	 * are emulated in the kernel. We get here only if the emulation
+	 * support doesn't exist and have to fix-up the next instruction
+	 * to be executed.
+	 */
+	regs->nip = utask->vaddr + MAX_UINSN_BYTES;
+	return 0;
+}
+
+/* callback routine for handling exceptions. */
+int arch_uprobe_exception_notify(struct notifier_block *self,
+				unsigned long val, void *data)
+{
+	struct die_args *args = data;
+	struct pt_regs *regs = args->regs;
+
+	/* regs == NULL is a kernel bug */
+	if (WARN_ON(!regs))
+		return NOTIFY_DONE;
+
+	/* We are only interested in userspace traps */
+	if (!user_mode(regs))
+		return NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_BPT:
+		if (uprobe_pre_sstep_notifier(regs))
+			return NOTIFY_STOP;
+		break;
+	case DIE_SSTEP:
+		if (uprobe_post_sstep_notifier(regs))
+			return NOTIFY_STOP;
+	default:
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+/*
+ * This function gets called when XOL instruction either gets trapped or
+ * the thread has a fatal signal, so reset the instruction pointer to its
+ * probed address.
+ */
+void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	current->thread.trap_nr = utask->autask.saved_trap_nr;
+	instruction_pointer_set(regs, utask->vaddr);
+}
+
+/*
+ * See if the instruction can be emulated.
+ * Returns true if instruction was emulated, false otherwise.
+ */
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	int ret;
+
+	/*
+	 * emulate_step() returns 1 if the insn was successfully emulated.
+	 * For all other cases, we need to single-step in hardware.
+	 */
+	ret = emulate_step(regs, auprobe->ainsn);
+	if (ret > 0)
+		return true;
+
+	return false;
+}
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index b67db22e102d..1b2076f049ce 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -723,9 +723,7 @@ int __cpuinit vdso_getcpu_init(void)
 
 	val = (cpu & 0xfff) | ((node & 0xffff) << 16);
 	mtspr(SPRN_SPRG3, val);
-#ifdef CONFIG_KVM_BOOK3S_HANDLER
-	get_paca()->kvm_hstate.sprg3 = val;
-#endif
+	get_paca()->sprg3 = val;
 
 	put_cpu();
 
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 02b32216bbc3..201ba59738be 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -33,7 +33,6 @@
 #include <asm/prom.h>
 #include <asm/firmware.h>
 #include <asm/tce.h>
-#include <asm/abs_addr.h>
 #include <asm/page.h>
 #include <asm/hvcall.h>
 
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 33aa715dab28..5dd3ab469976 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -319,7 +319,6 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 	if (is_error_page(new_page)) {
 		printk(KERN_ERR "Couldn't get guest page for gfn %llx!\n",
 			(unsigned long long)gfn);
-		kvm_release_page_clean(new_page);
 		return;
 	}
 	hpaddr = page_to_phys(new_page);
diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c
index f922c29bb234..00aa61268e0d 100644
--- a/arch/powerpc/kvm/book3s_32_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_32_mmu_host.c
@@ -141,7 +141,7 @@ extern char etext[];
 int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 {
 	pfn_t hpaddr;
-	u64 va;
+	u64 vpn;
 	u64 vsid;
 	struct kvmppc_sid_map *map;
 	volatile u32 *pteg;
@@ -173,7 +173,7 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 	BUG_ON(!map);
 
 	vsid = map->host_vsid;
-	va = (vsid << SID_SHIFT) | (eaddr & ~ESID_MASK);
+	vpn = (vsid << (SID_SHIFT - VPN_SHIFT)) | ((eaddr & ~ESID_MASK) >> VPN_SHIFT)
 
 next_pteg:
 	if (rr == 16) {
@@ -211,6 +211,9 @@ next_pteg:
 		pteg1 |= PP_RWRX;
 	}
 
+	if (orig_pte->may_execute)
+		kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT);
+
 	local_irq_disable();
 
 	if (pteg[rr]) {
@@ -241,11 +244,11 @@ next_pteg:
 	dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%llx (0x%llx) -> %lx\n",
 		    orig_pte->may_write ? 'w' : '-',
 		    orig_pte->may_execute ? 'x' : '-',
-		    orig_pte->eaddr, (ulong)pteg, va,
+		    orig_pte->eaddr, (ulong)pteg, vpn,
 		    orig_pte->vpage, hpaddr);
 
 	pte->slot = (ulong)&pteg[rr];
-	pte->host_va = va;
+	pte->host_vpn = vpn;
 	pte->pte = *orig_pte;
 	pte->pfn = hpaddr >> PAGE_SHIFT;
 
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index 10fc8ec9d2a8..4d72f9ebc554 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -33,7 +33,7 @@
 
 void kvmppc_mmu_invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
 {
-	ppc_md.hpte_invalidate(pte->slot, pte->host_va,
+	ppc_md.hpte_invalidate(pte->slot, pte->host_vpn,
 			       MMU_PAGE_4K, MMU_SEGSIZE_256M,
 			       false);
 }
@@ -80,8 +80,9 @@ static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
 
 int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 {
+	unsigned long vpn;
 	pfn_t hpaddr;
-	ulong hash, hpteg, va;
+	ulong hash, hpteg;
 	u64 vsid;
 	int ret;
 	int rflags = 0x192;
@@ -117,7 +118,7 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 	}
 
 	vsid = map->host_vsid;
-	va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
+	vpn = hpt_vpn(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
 
 	if (!orig_pte->may_write)
 		rflags |= HPTE_R_PP;
@@ -126,8 +127,10 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 
 	if (!orig_pte->may_execute)
 		rflags |= HPTE_R_N;
+	else
+		kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT);
 
-	hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M);
+	hash = hpt_hash(vpn, PTE_SIZE, MMU_SEGSIZE_256M);
 
 map_again:
 	hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
@@ -139,7 +142,8 @@ map_again:
 			goto out;
 		}
 
-	ret = ppc_md.hpte_insert(hpteg, va, hpaddr, rflags, vflags, MMU_PAGE_4K, MMU_SEGSIZE_256M);
+	ret = ppc_md.hpte_insert(hpteg, vpn, hpaddr, rflags, vflags,
+				 MMU_PAGE_4K, MMU_SEGSIZE_256M);
 
 	if (ret < 0) {
 		/* If we couldn't map a primary PTE, try a secondary */
@@ -150,7 +154,8 @@ map_again:
 	} else {
 		struct hpte_cache *pte = kvmppc_mmu_hpte_cache_next(vcpu);
 
-		trace_kvm_book3s_64_mmu_map(rflags, hpteg, va, hpaddr, orig_pte);
+		trace_kvm_book3s_64_mmu_map(rflags, hpteg,
+					    vpn, hpaddr, orig_pte);
 
 		/* The ppc_md code may give us a secondary entry even though we
 		   asked for a primary. Fix up. */
@@ -160,7 +165,7 @@ map_again:
 		}
 
 		pte->slot = hpteg + (ret & 7);
-		pte->host_va = va;
+		pte->host_vpn = vpn;
 		pte->pte = *orig_pte;
 		pte->pfn = hpaddr >> PAGE_SHIFT;
 
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index d03eb6f7b058..d95d11322a15 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -705,7 +705,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		goto out_unlock;
 	hpte[0] = (hpte[0] & ~HPTE_V_ABSENT) | HPTE_V_VALID;
 
-	rmap = &memslot->rmap[gfn - memslot->base_gfn];
+	rmap = &memslot->arch.rmap[gfn - memslot->base_gfn];
 	lock_rmap(rmap);
 
 	/* Check if we might have been invalidated; let the guest retry if so */
@@ -756,9 +756,12 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	goto out_put;
 }
 
-static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
-			  int (*handler)(struct kvm *kvm, unsigned long *rmapp,
-					 unsigned long gfn))
+static int kvm_handle_hva_range(struct kvm *kvm,
+				unsigned long start,
+				unsigned long end,
+				int (*handler)(struct kvm *kvm,
+					       unsigned long *rmapp,
+					       unsigned long gfn))
 {
 	int ret;
 	int retval = 0;
@@ -767,15 +770,25 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 
 	slots = kvm_memslots(kvm);
 	kvm_for_each_memslot(memslot, slots) {
-		unsigned long start = memslot->userspace_addr;
-		unsigned long end;
+		unsigned long hva_start, hva_end;
+		gfn_t gfn, gfn_end;
 
-		end = start + (memslot->npages << PAGE_SHIFT);
-		if (hva >= start && hva < end) {
-			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+		hva_start = max(start, memslot->userspace_addr);
+		hva_end = min(end, memslot->userspace_addr +
+					(memslot->npages << PAGE_SHIFT));
+		if (hva_start >= hva_end)
+			continue;
+		/*
+		 * {gfn(page) | page intersects with [hva_start, hva_end)} =
+		 * {gfn, gfn+1, ..., gfn_end-1}.
+		 */
+		gfn = hva_to_gfn_memslot(hva_start, memslot);
+		gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot);
+
+		for (; gfn < gfn_end; ++gfn) {
+			gfn_t gfn_offset = gfn - memslot->base_gfn;
 
-			ret = handler(kvm, &memslot->rmap[gfn_offset],
-				      memslot->base_gfn + gfn_offset);
+			ret = handler(kvm, &memslot->arch.rmap[gfn_offset], gfn);
 			retval |= ret;
 		}
 	}
@@ -783,6 +796,13 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 	return retval;
 }
 
+static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp,
+					 unsigned long gfn))
+{
+	return kvm_handle_hva_range(kvm, hva, hva + 1, handler);
+}
+
 static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
 			   unsigned long gfn)
 {
@@ -850,6 +870,13 @@ int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
 	return 0;
 }
 
+int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end)
+{
+	if (kvm->arch.using_mmu_notifiers)
+		kvm_handle_hva_range(kvm, start, end, kvm_unmap_rmapp);
+	return 0;
+}
+
 static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
 			 unsigned long gfn)
 {
@@ -1009,7 +1036,7 @@ long kvmppc_hv_get_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
 	unsigned long *rmapp, *map;
 
 	preempt_disable();
-	rmapp = memslot->rmap;
+	rmapp = memslot->arch.rmap;
 	map = memslot->dirty_bitmap;
 	for (i = 0; i < memslot->npages; ++i) {
 		if (kvm_test_clear_dirty(kvm, rmapp))
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 5c70d19494f9..fb0e821622d4 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -84,7 +84,7 @@ static void remove_revmap_chain(struct kvm *kvm, long pte_index,
 	if (!memslot || (memslot->flags & KVM_MEMSLOT_INVALID))
 		return;
 
-	rmap = real_vmalloc_addr(&memslot->rmap[gfn - memslot->base_gfn]);
+	rmap = real_vmalloc_addr(&memslot->arch.rmap[gfn - memslot->base_gfn]);
 	lock_rmap(rmap);
 
 	head = *rmap & KVMPPC_RMAP_INDEX;
@@ -180,7 +180,7 @@ long kvmppc_h_enter(struct kvm_vcpu *vcpu, unsigned long flags,
 	if (!slot_is_aligned(memslot, psize))
 		return H_PARAMETER;
 	slot_fn = gfn - memslot->base_gfn;
-	rmap = &memslot->rmap[slot_fn];
+	rmap = &memslot->arch.rmap[slot_fn];
 
 	if (!kvm->arch.using_mmu_notifiers) {
 		physp = kvm->arch.slot_phys[memslot->id];
@@ -197,7 +197,7 @@ long kvmppc_h_enter(struct kvm_vcpu *vcpu, unsigned long flags,
 		pa &= PAGE_MASK;
 	} else {
 		/* Translate to host virtual address */
-		hva = gfn_to_hva_memslot(memslot, gfn);
+		hva = __gfn_to_hva_memslot(memslot, gfn);
 
 		/* Look up the Linux PTE for the backing page */
 		pte_size = psize;
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 5a84c8d3d040..74a24bbb9637 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1065,7 +1065,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 	mtspr	SPRN_DABRX,r6
 
 	/* Restore SPRG3 */
-	ld	r3,HSTATE_SPRG3(r13)
+	ld	r3,PACA_SPRG3(r13)
 	mtspr	SPRN_SPRG3,r3
 
 	/*
@@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede)
 	sync			/* order setting ceded vs. testing prodded */
 	lbz	r5,VCPU_PRODDED(r3)
 	cmpwi	r5,0
-	bne	1f
+	bne	kvm_cede_prodded
 	li	r0,0		/* set trap to 0 to say hcall is handled */
 	stw	r0,VCPU_TRAP(r3)
 	li	r0,H_SUCCESS
 	std	r0,VCPU_GPR(R3)(r3)
 BEGIN_FTR_SECTION
-	b	2f		/* just send it up to host on 970 */
+	b	kvm_cede_exit	/* just send it up to host on 970 */
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
 
 	/*
@@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
 	or	r4,r4,r0
 	PPC_POPCNTW(R7,R4)
 	cmpw	r7,r8
-	bge	2f
+	bge	kvm_cede_exit
 	stwcx.	r4,0,r6
 	bne	31b
 	li	r0,1
@@ -1555,7 +1555,8 @@ kvm_end_cede:
 	b	hcall_real_fallback
 
 	/* cede when already previously prodded case */
-1:	li	r0,0
+kvm_cede_prodded:
+	li	r0,0
 	stb	r0,VCPU_PRODDED(r3)
 	sync			/* order testing prodded vs. clearing ceded */
 	stb	r0,VCPU_CEDED(r3)
@@ -1563,7 +1564,8 @@ kvm_end_cede:
 	blr
 
 	/* we've ceded but we want to give control to the host */
-2:	li	r3,H_TOO_HARD
+kvm_cede_exit:
+	li	r3,H_TOO_HARD
 	blr
 
 secondary_too_late:
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index a1baec340f7e..05c28f59f77f 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -242,10 +242,8 @@ static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 	int i;
 
 	hpage = gfn_to_page(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
-	if (is_error_page(hpage)) {
-		kvm_release_page_clean(hpage);
+	if (is_error_page(hpage))
 		return;
-	}
 
 	hpage_offset = pte->raddr & ~PAGE_MASK;
 	hpage_offset &= ~0xFFFULL;
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index c510fc961302..ff38b664195d 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref)
 static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500)
 {
 	if (vcpu_e500->g2h_tlb1_map)
-		memset(vcpu_e500->g2h_tlb1_map,
-		       sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0);
+		memset(vcpu_e500->g2h_tlb1_map, 0,
+		       sizeof(u64) * vcpu_e500->gtlb_params[1].entries);
 	if (vcpu_e500->h2g_tlb1_rmap)
-		memset(vcpu_e500->h2g_tlb1_rmap,
-		       sizeof(unsigned int) * host_tlb_params[1].entries, 0);
+		memset(vcpu_e500->h2g_tlb1_rmap, 0,
+		       sizeof(unsigned int) * host_tlb_params[1].entries);
 }
 
 static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500)
@@ -520,11 +520,10 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 
 	if (likely(!pfnmap)) {
 		unsigned long tsize_pages = 1 << (tsize + 10 - PAGE_SHIFT);
-		pfn = gfn_to_pfn_memslot(vcpu_e500->vcpu.kvm, slot, gfn);
+		pfn = gfn_to_pfn_memslot(slot, gfn);
 		if (is_error_pfn(pfn)) {
 			printk(KERN_ERR "Couldn't get real page for gfn %lx!\n",
 					(long)gfn);
-			kvm_release_pfn_clean(pfn);
 			return;
 		}
 
@@ -539,6 +538,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 
 	kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize,
 				ref, gvaddr, stlbe);
+
+	/* Clear i-cache for new pages */
+	kvmppc_mmu_flush_icache(pfn);
 }
 
 /* XXX only map the one-one case, for now use TLB0 */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 87f4dc886076..4d213b8b0fb5 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -302,10 +302,18 @@ long kvm_arch_dev_ioctl(struct file *filp,
 void kvm_arch_free_memslot(struct kvm_memory_slot *free,
 			   struct kvm_memory_slot *dont)
 {
+	if (!dont || free->arch.rmap != dont->arch.rmap) {
+		vfree(free->arch.rmap);
+		free->arch.rmap = NULL;
+	}
 }
 
 int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 {
+	slot->arch.rmap = vzalloc(npages * sizeof(*slot->arch.rmap));
+	if (!slot->arch.rmap)
+		return -ENOMEM;
+
 	return 0;
 }
 
@@ -326,8 +334,12 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 	kvmppc_core_commit_memory_region(kvm, mem);
 }
 
+void kvm_arch_flush_shadow_all(struct kvm *kvm)
+{
+}
 
-void kvm_arch_flush_shadow(struct kvm *kvm)
+void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
+				   struct kvm_memory_slot *slot)
 {
 }
 
diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h
index 877186b7b1c3..ddb6a2149d44 100644
--- a/arch/powerpc/kvm/trace.h
+++ b/arch/powerpc/kvm/trace.h
@@ -189,7 +189,7 @@ TRACE_EVENT(kvm_book3s_mmu_map,
 	TP_ARGS(pte),
 
 	TP_STRUCT__entry(
-		__field(	u64,		host_va		)
+		__field(	u64,		host_vpn	)
 		__field(	u64,		pfn		)
 		__field(	ulong,		eaddr		)
 		__field(	u64,		vpage		)
@@ -198,7 +198,7 @@ TRACE_EVENT(kvm_book3s_mmu_map,
 	),
 
 	TP_fast_assign(
-		__entry->host_va	= pte->host_va;
+		__entry->host_vpn	= pte->host_vpn;
 		__entry->pfn		= pte->pfn;
 		__entry->eaddr		= pte->pte.eaddr;
 		__entry->vpage		= pte->pte.vpage;
@@ -208,8 +208,8 @@ TRACE_EVENT(kvm_book3s_mmu_map,
 					  (pte->pte.may_execute ? 0x1 : 0);
 	),
 
-	TP_printk("Map: hva=%llx pfn=%llx ea=%lx vp=%llx ra=%lx [%x]",
-		  __entry->host_va, __entry->pfn, __entry->eaddr,
+	TP_printk("Map: hvpn=%llx pfn=%llx ea=%lx vp=%llx ra=%lx [%x]",
+		  __entry->host_vpn, __entry->pfn, __entry->eaddr,
 		  __entry->vpage, __entry->raddr, __entry->flags)
 );
 
@@ -218,7 +218,7 @@ TRACE_EVENT(kvm_book3s_mmu_invalidate,
 	TP_ARGS(pte),
 
 	TP_STRUCT__entry(
-		__field(	u64,		host_va		)
+		__field(	u64,		host_vpn	)
 		__field(	u64,		pfn		)
 		__field(	ulong,		eaddr		)
 		__field(	u64,		vpage		)
@@ -227,7 +227,7 @@ TRACE_EVENT(kvm_book3s_mmu_invalidate,
 	),
 
 	TP_fast_assign(
-		__entry->host_va	= pte->host_va;
+		__entry->host_vpn	= pte->host_vpn;
 		__entry->pfn		= pte->pfn;
 		__entry->eaddr		= pte->pte.eaddr;
 		__entry->vpage		= pte->pte.vpage;
@@ -238,7 +238,7 @@ TRACE_EVENT(kvm_book3s_mmu_invalidate,
 	),
 
 	TP_printk("Flush: hva=%llx pfn=%llx ea=%lx vp=%llx ra=%lx [%x]",
-		  __entry->host_va, __entry->pfn, __entry->eaddr,
+		  __entry->host_vpn, __entry->pfn, __entry->eaddr,
 		  __entry->vpage, __entry->raddr, __entry->flags)
 );
 
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index dd223b3eb333..17e5b2364312 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr)
 {
 	int err;
 
-	err = __put_user(instr, addr);
+	__put_user_size(instr, addr, 4, err);
 	if (err)
 		return err;
 	asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index f9ede7c6606e..0d24ff15f5f6 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -288,7 +288,7 @@ err1;	stb	r0,0(r3)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	bl	.enter_vmx_usercopy
-	cmpwi	r3,0
+	cmpwi	cr1,r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
 	ld	r3,STACKFRAMESIZE+48(r1)
 	ld	r4,STACKFRAMESIZE+56(r1)
@@ -326,38 +326,7 @@ err1;	stb	r0,0(r3)
 	dcbt	r0,r8,0b01010	/* GO */
 .machine pop
 
-	/*
-	 * We prefetch both the source and destination using enhanced touch
-	 * instructions. We use a stream ID of 0 for the load side and
-	 * 1 for the store side.
-	 */
-	clrrdi	r6,r4,7
-	clrrdi	r9,r3,7
-	ori	r9,r9,1		/* stream=1 */
-
-	srdi	r7,r5,7		/* length in cachelines, capped at 0x3FF */
-	cmpldi	cr1,r7,0x3FF
-	ble	cr1,1f
-	li	r7,0x3FF
-1:	lis	r0,0x0E00	/* depth=7 */
-	sldi	r7,r7,7
-	or	r7,r7,r0
-	ori	r10,r7,1	/* stream=1 */
-
-	lis	r8,0x8000	/* GO=1 */
-	clrldi	r8,r8,32
-
-.machine push
-.machine "power4"
-	dcbt	r0,r6,0b01000
-	dcbt	r0,r7,0b01010
-	dcbtst	r0,r9,0b01000
-	dcbtst	r0,r10,0b01010
-	eieio
-	dcbt	r0,r8,0b01010	/* GO */
-.machine pop
-
-	beq	.Lunwind_stack_nonvmx_copy
+	beq	cr1,.Lunwind_stack_nonvmx_copy
 
 	/*
 	 * If source and destination are not relatively aligned we use a
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index 0efdc51bc716..0663630baf3b 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	bl	.enter_vmx_copy
-	cmpwi	r3,0
+	cmpwi	cr1,r3,0
 	ld	r0,STACKFRAMESIZE+16(r1)
 	ld	r3,STACKFRAMESIZE+48(r1)
 	ld	r4,STACKFRAMESIZE+56(r1)
@@ -239,8 +239,8 @@ _GLOBAL(memcpy_power7)
 	ori	r9,r9,1		/* stream=1 */
 
 	srdi	r7,r5,7		/* length in cachelines, capped at 0x3FF */
-	cmpldi	cr1,r7,0x3FF
-	ble	cr1,1f
+	cmpldi	r7,0x3FF
+	ble	1f
 	li	r7,0x3FF
 1:	lis	r0,0x0E00	/* depth=7 */
 	sldi	r7,r7,7
@@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7)
 	dcbt	r0,r8,0b01010	/* GO */
 .machine pop
 
-	beq	.Lunwind_stack_nonvmx_copy
+	beq	cr1,.Lunwind_stack_nonvmx_copy
 
 	/*
 	 * If source and destination are not relatively aligned we use a
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 9a52349874ee..e15c521846ca 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -566,7 +566,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 	unsigned long int ea;
 	unsigned int cr, mb, me, sh;
 	int err;
-	unsigned long old_ra;
+	unsigned long old_ra, val3;
 	long ival;
 
 	opcode = instr >> 26;
@@ -1486,11 +1486,43 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		goto ldst_done;
 
 	case 36:	/* stw */
-	case 37:	/* stwu */
 		val = regs->gpr[rd];
 		err = write_mem(val, dform_ea(instr, regs), 4, regs);
 		goto ldst_done;
 
+	case 37:	/* stwu */
+		val = regs->gpr[rd];
+		val3 = dform_ea(instr, regs);
+		/*
+		 * For PPC32 we always use stwu to change stack point with r1. So
+		 * this emulated store may corrupt the exception frame, now we
+		 * have to provide the exception frame trampoline, which is pushed
+		 * below the kprobed function stack. So we only update gpr[1] but
+		 * don't emulate the real store operation. We will do real store
+		 * operation safely in exception return code by checking this flag.
+		 */
+		if ((ra == 1) && !(regs->msr & MSR_PR) \
+			&& (val3 >= (regs->gpr[1] - STACK_INT_FRAME_SIZE))) {
+			/*
+			 * Check if we will touch kernel sack overflow
+			 */
+			if (val3 - STACK_INT_FRAME_SIZE <= current->thread.ksp_limit) {
+				printk(KERN_CRIT "Can't kprobe this since Kernel stack overflow.\n");
+				err = -EINVAL;
+				break;
+			}
+
+			/*
+			 * Check if we already set since that means we'll
+			 * lose the previous value.
+			 */
+			WARN_ON(test_thread_flag(TIF_EMULATE_STACK_STORE));
+			set_thread_flag(TIF_EMULATE_STACK_STORE);
+			err = 0;
+		} else
+			err = write_mem(val, val3, 4, regs);
+		goto ldst_done;
+
 	case 38:	/* stb */
 	case 39:	/* stbu */
 		val = regs->gpr[rd];
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 08ffcf52a856..5495ebe983a2 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -133,6 +133,7 @@ static int do_sigbus(struct pt_regs *regs, unsigned long address)
 	up_read(&current->mm->mmap_sem);
 
 	if (user_mode(regs)) {
+		current->thread.trap_nr = BUS_ADRERR;
 		info.si_signo = SIGBUS;
 		info.si_errno = 0;
 		info.si_code = BUS_ADRERR;
@@ -470,7 +471,7 @@ bad_area_nosemaphore:
 	if (is_exec && (error_code & DSISR_PROTFAULT))
 		printk_ratelimited(KERN_CRIT "kernel tried to execute NX-protected"
 				   " page (%lx) - exploit attempt? (uid: %d)\n",
-				   address, current_uid());
+				   address, from_kuid(&init_user_ns, current_uid()));
 
 	return SIGSEGV;
 
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 602aeb06d298..56585086413a 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -63,7 +63,7 @@ _GLOBAL(__hash_page_4K)
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
-	 * r29 is "va"
+	 * r29 is vpn
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 */
@@ -111,10 +111,10 @@ BEGIN_FTR_SECTION
 	cmpdi	r9,0			/* check segment size */
 	bne	3f
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	/* Calc va and put it in r29 */
-	rldicr	r29,r5,28,63-28
-	rldicl	r3,r3,0,36
-	or	r29,r3,r29
+	/* Calc vpn and put it in r29 */
+	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
+	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
+	or	r29,r28,r29
 
 	/* Calculate hash value for primary slot and store it in r28 */
 	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
@@ -122,14 +122,19 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	xor	r28,r5,r0
 	b	4f
 
-3:	/* Calc VA and hash in r29 and r28 for 1T segment */
-	sldi	r29,r5,40		/* vsid << 40 */
-	clrldi	r3,r3,24		/* ea & 0xffffffffff */
+3:	/* Calc vpn and put it in r29 */
+	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
+	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
+	or	r29,r28,r29
+
+	/*
+	 * calculate hash value for primary slot and
+	 * store it in r28 for 1T segment
+	 */
 	rldic	r28,r5,25,25		/* (vsid << 25) & 0x7fffffffff */
 	clrldi	r5,r5,40		/* vsid & 0xffffff */
 	rldicl	r0,r3,64-12,36		/* (ea >> 12) & 0xfffffff */
 	xor	r28,r28,r5
-	or	r29,r3,r29		/* VA */
 	xor	r28,r28,r0		/* hash */
 
 	/* Convert linux PTE bits into HW equivalents */
@@ -185,7 +190,7 @@ htab_insert_pte:
 
 	/* Call ppc_md.hpte_insert */
 	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve va */
+	mr	r4,r29			/* Retrieve vpn */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
@@ -208,7 +213,7 @@ _GLOBAL(htab_call_hpte_insert1)
 	
 	/* Call ppc_md.hpte_insert */
 	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve va */
+	mr	r4,r29			/* Retrieve vpn */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
@@ -278,7 +283,7 @@ htab_modify_pte:
 	add	r3,r0,r3	/* add slot idx */
 
 	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* va */
+	mr	r5,r29			/* vpn */
 	li	r6,MMU_PAGE_4K		/* page size */
 	ld	r7,STK_PARAM(R9)(r1)	/* segment size */
 	ld	r8,STK_PARAM(R8)(r1)	/* get "local" param */
@@ -339,7 +344,7 @@ _GLOBAL(__hash_page_4K)
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
-	 * r29 is "va"
+	 * r29 is vpn
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 * r26 is the hidx mask
@@ -394,10 +399,14 @@ BEGIN_FTR_SECTION
 	cmpdi	r9,0			/* check segment size */
 	bne	3f
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	/* Calc va and put it in r29 */
-	rldicr	r29,r5,28,63-28		/* r29 = (vsid << 28) */
-	rldicl	r3,r3,0,36		/* r3 = (ea & 0x0fffffff) */
-	or	r29,r3,r29		/* r29 = va */
+	/* Calc vpn and put it in r29 */
+	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
+	/*
+	 * clrldi r3,r3,64 - SID_SHIFT -->  ea & 0xfffffff
+	 * srdi	 r28,r3,VPN_SHIFT
+	 */
+	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
+	or	r29,r28,r29
 
 	/* Calculate hash value for primary slot and store it in r28 */
 	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
@@ -405,14 +414,23 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	xor	r28,r5,r0
 	b	4f
 
-3:	/* Calc VA and hash in r29 and r28 for 1T segment */
-	sldi	r29,r5,40		/* vsid << 40 */
-	clrldi	r3,r3,24		/* ea & 0xffffffffff */
+3:	/* Calc vpn and put it in r29 */
+	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
+	/*
+	 * clrldi r3,r3,64 - SID_SHIFT_1T -->  ea & 0xffffffffff
+	 * srdi	r28,r3,VPN_SHIFT
+	 */
+	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
+	or	r29,r28,r29
+
+	/*
+	 * Calculate hash value for primary slot and
+	 * store it in r28  for 1T segment
+	 */
 	rldic	r28,r5,25,25		/* (vsid << 25) & 0x7fffffffff */
 	clrldi	r5,r5,40		/* vsid & 0xffffff */
 	rldicl	r0,r3,64-12,36		/* (ea >> 12) & 0xfffffff */
 	xor	r28,r28,r5
-	or	r29,r3,r29		/* VA */
 	xor	r28,r28,r0		/* hash */
 
 	/* Convert linux PTE bits into HW equivalents */
@@ -488,7 +506,7 @@ htab_special_pfn:
 
 	/* Call ppc_md.hpte_insert */
 	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve va */
+	mr	r4,r29			/* Retrieve vpn */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
@@ -515,7 +533,7 @@ _GLOBAL(htab_call_hpte_insert1)
 
 	/* Call ppc_md.hpte_insert */
 	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve va */
+	mr	r4,r29			/* Retrieve vpn */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
@@ -547,7 +565,7 @@ _GLOBAL(htab_call_hpte_remove)
 	 * useless now that the segment has been switched to 4k pages.
 	 */
 htab_inval_old_hpte:
-	mr	r3,r29			/* virtual addr */
+	mr	r3,r29			/* vpn */
 	mr	r4,r31			/* PTE.pte */
 	li	r5,0			/* PTE.hidx */
 	li	r6,MMU_PAGE_64K		/* psize */
@@ -620,7 +638,7 @@ htab_modify_pte:
 	add	r3,r0,r3	/* add slot idx */
 
 	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* va */
+	mr	r5,r29			/* vpn */
 	li	r6,MMU_PAGE_4K		/* page size */
 	ld	r7,STK_PARAM(R9)(r1)	/* segment size */
 	ld	r8,STK_PARAM(R8)(r1)	/* get "local" param */
@@ -676,7 +694,7 @@ _GLOBAL(__hash_page_64K)
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
-	 * r29 is "va"
+	 * r29 is vpn
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 */
@@ -729,10 +747,10 @@ BEGIN_FTR_SECTION
 	cmpdi	r9,0			/* check segment size */
 	bne	3f
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	/* Calc va and put it in r29 */
-	rldicr	r29,r5,28,63-28
-	rldicl	r3,r3,0,36
-	or	r29,r3,r29
+	/* Calc vpn and put it in r29 */
+	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
+	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
+	or	r29,r28,r29
 
 	/* Calculate hash value for primary slot and store it in r28 */
 	rldicl	r5,r5,0,25		/* vsid & 0x0000007fffffffff */
@@ -740,14 +758,19 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	xor	r28,r5,r0
 	b	4f
 
-3:	/* Calc VA and hash in r29 and r28 for 1T segment */
-	sldi	r29,r5,40		/* vsid << 40 */
-	clrldi	r3,r3,24		/* ea & 0xffffffffff */
+3:	/* Calc vpn and put it in r29 */
+	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
+	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
+	or	r29,r28,r29
+
+	/*
+	 * calculate hash value for primary slot and
+	 * store it in r28 for 1T segment
+	 */
 	rldic	r28,r5,25,25		/* (vsid << 25) & 0x7fffffffff */
 	clrldi	r5,r5,40		/* vsid & 0xffffff */
 	rldicl	r0,r3,64-16,40		/* (ea >> 16) & 0xffffff */
 	xor	r28,r28,r5
-	or	r29,r3,r29		/* VA */
 	xor	r28,r28,r0		/* hash */
 
 	/* Convert linux PTE bits into HW equivalents */
@@ -806,7 +829,7 @@ ht64_insert_pte:
 
 	/* Call ppc_md.hpte_insert */
 	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve va */
+	mr	r4,r29			/* Retrieve vpn */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_64K
 	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
@@ -829,7 +852,7 @@ _GLOBAL(ht64_call_hpte_insert1)
 
 	/* Call ppc_md.hpte_insert */
 	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve va */
+	mr	r4,r29			/* Retrieve vpn */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_64K
 	ld	r9,STK_PARAM(R9)(r1)	/* segment size */
@@ -899,7 +922,7 @@ ht64_modify_pte:
 	add	r3,r0,r3	/* add slot idx */
 
 	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* va */
+	mr	r5,r29			/* vpn */
 	li	r6,MMU_PAGE_64K
 	ld	r7,STK_PARAM(R9)(r1)	/* segment size */
 	ld	r8,STK_PARAM(R8)(r1)	/* get "local" param */
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 90039bc64119..ffc1e00f7a22 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -14,10 +14,10 @@
 
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
+#include <linux/of.h>
 #include <linux/threads.h>
 #include <linux/smp.h>
 
-#include <asm/abs_addr.h>
 #include <asm/machdep.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
@@ -39,22 +39,35 @@
 
 DEFINE_RAW_SPINLOCK(native_tlbie_lock);
 
-static inline void __tlbie(unsigned long va, int psize, int ssize)
+static inline void __tlbie(unsigned long vpn, int psize, int ssize)
 {
+	unsigned long va;
 	unsigned int penc;
 
-	/* clear top 16 bits, non SLS segment */
+	/*
+	 * We need 14 to 65 bits of va for a tlibe of 4K page
+	 * With vpn we ignore the lower VPN_SHIFT bits already.
+	 * And top two bits are already ignored because we can
+	 * only accomadate 76 bits in a 64 bit vpn with a VPN_SHIFT
+	 * of 12.
+	 */
+	va = vpn << VPN_SHIFT;
+	/*
+	 * clear top 16 bits of 64bit va, non SLS segment
+	 * Older versions of the architecture (2.02 and earler) require the
+	 * masking of the top 16 bits.
+	 */
 	va &= ~(0xffffULL << 48);
 
 	switch (psize) {
 	case MMU_PAGE_4K:
-		va &= ~0xffful;
 		va |= ssize << 8;
 		asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
 			     : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
 			     : "memory");
 		break;
 	default:
+		/* We need 14 to 14 + i bits of va */
 		penc = mmu_psize_defs[psize].penc;
 		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 		va |= penc << 12;
@@ -67,21 +80,28 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
 	}
 }
 
-static inline void __tlbiel(unsigned long va, int psize, int ssize)
+static inline void __tlbiel(unsigned long vpn, int psize, int ssize)
 {
+	unsigned long va;
 	unsigned int penc;
 
-	/* clear top 16 bits, non SLS segment */
+	/* VPN_SHIFT can be atmost 12 */
+	va = vpn << VPN_SHIFT;
+	/*
+	 * clear top 16 bits of 64 bit va, non SLS segment
+	 * Older versions of the architecture (2.02 and earler) require the
+	 * masking of the top 16 bits.
+	 */
 	va &= ~(0xffffULL << 48);
 
 	switch (psize) {
 	case MMU_PAGE_4K:
-		va &= ~0xffful;
 		va |= ssize << 8;
 		asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
 			     : : "r"(va) : "memory");
 		break;
 	default:
+		/* We need 14 to 14 + i bits of va */
 		penc = mmu_psize_defs[psize].penc;
 		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 		va |= penc << 12;
@@ -94,7 +114,7 @@ static inline void __tlbiel(unsigned long va, int psize, int ssize)
 
 }
 
-static inline void tlbie(unsigned long va, int psize, int ssize, int local)
+static inline void tlbie(unsigned long vpn, int psize, int ssize, int local)
 {
 	unsigned int use_local = local && mmu_has_feature(MMU_FTR_TLBIEL);
 	int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
@@ -105,10 +125,10 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local)
 		raw_spin_lock(&native_tlbie_lock);
 	asm volatile("ptesync": : :"memory");
 	if (use_local) {
-		__tlbiel(va, psize, ssize);
+		__tlbiel(vpn, psize, ssize);
 		asm volatile("ptesync": : :"memory");
 	} else {
-		__tlbie(va, psize, ssize);
+		__tlbie(vpn, psize, ssize);
 		asm volatile("eieio; tlbsync; ptesync": : :"memory");
 	}
 	if (lock_tlbie && !use_local)
@@ -134,7 +154,7 @@ static inline void native_unlock_hpte(struct hash_pte *hptep)
 	clear_bit_unlock(HPTE_LOCK_BIT, word);
 }
 
-static long native_hpte_insert(unsigned long hpte_group, unsigned long va,
+static long native_hpte_insert(unsigned long hpte_group, unsigned long vpn,
 			unsigned long pa, unsigned long rflags,
 			unsigned long vflags, int psize, int ssize)
 {
@@ -143,9 +163,9 @@ static long native_hpte_insert(unsigned long hpte_group, unsigned long va,
 	int i;
 
 	if (!(vflags & HPTE_V_BOLTED)) {
-		DBG_LOW("    insert(group=%lx, va=%016lx, pa=%016lx,"
+		DBG_LOW("    insert(group=%lx, vpn=%016lx, pa=%016lx,"
 			" rflags=%lx, vflags=%lx, psize=%d)\n",
-			hpte_group, va, pa, rflags, vflags, psize);
+			hpte_group, vpn, pa, rflags, vflags, psize);
 	}
 
 	for (i = 0; i < HPTES_PER_GROUP; i++) {
@@ -163,7 +183,7 @@ static long native_hpte_insert(unsigned long hpte_group, unsigned long va,
 	if (i == HPTES_PER_GROUP)
 		return -1;
 
-	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_v = hpte_encode_v(vpn, psize, ssize) | vflags | HPTE_V_VALID;
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
 	if (!(vflags & HPTE_V_BOLTED)) {
@@ -225,17 +245,17 @@ static long native_hpte_remove(unsigned long hpte_group)
 }
 
 static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
-				 unsigned long va, int psize, int ssize,
+				 unsigned long vpn, int psize, int ssize,
 				 int local)
 {
 	struct hash_pte *hptep = htab_address + slot;
 	unsigned long hpte_v, want_v;
 	int ret = 0;
 
-	want_v = hpte_encode_v(va, psize, ssize);
+	want_v = hpte_encode_v(vpn, psize, ssize);
 
-	DBG_LOW("    update(va=%016lx, avpnv=%016lx, hash=%016lx, newpp=%x)",
-		va, want_v & HPTE_V_AVPN, slot, newpp);
+	DBG_LOW("    update(vpn=%016lx, avpnv=%016lx, group=%lx, newpp=%lx)",
+		vpn, want_v & HPTE_V_AVPN, slot, newpp);
 
 	native_lock_hpte(hptep);
 
@@ -254,12 +274,12 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	native_unlock_hpte(hptep);
 
 	/* Ensure it is out of the tlb too. */
-	tlbie(va, psize, ssize, local);
+	tlbie(vpn, psize, ssize, local);
 
 	return ret;
 }
 
-static long native_hpte_find(unsigned long va, int psize, int ssize)
+static long native_hpte_find(unsigned long vpn, int psize, int ssize)
 {
 	struct hash_pte *hptep;
 	unsigned long hash;
@@ -267,8 +287,8 @@ static long native_hpte_find(unsigned long va, int psize, int ssize)
 	long slot;
 	unsigned long want_v, hpte_v;
 
-	hash = hpt_hash(va, mmu_psize_defs[psize].shift, ssize);
-	want_v = hpte_encode_v(va, psize, ssize);
+	hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize);
+	want_v = hpte_encode_v(vpn, psize, ssize);
 
 	/* Bolted mappings are only ever in the primary group */
 	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -295,14 +315,15 @@ static long native_hpte_find(unsigned long va, int psize, int ssize)
 static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
 				       int psize, int ssize)
 {
-	unsigned long vsid, va;
+	unsigned long vpn;
+	unsigned long vsid;
 	long slot;
 	struct hash_pte *hptep;
 
 	vsid = get_kernel_vsid(ea, ssize);
-	va = hpt_va(ea, vsid, ssize);
+	vpn = hpt_vpn(ea, vsid, ssize);
 
-	slot = native_hpte_find(va, psize, ssize);
+	slot = native_hpte_find(vpn, psize, ssize);
 	if (slot == -1)
 		panic("could not find page to bolt\n");
 	hptep = htab_address + slot;
@@ -312,10 +333,10 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
 		(newpp & (HPTE_R_PP | HPTE_R_N));
 
 	/* Ensure it is out of the tlb too. */
-	tlbie(va, psize, ssize, 0);
+	tlbie(vpn, psize, ssize, 0);
 }
 
-static void native_hpte_invalidate(unsigned long slot, unsigned long va,
+static void native_hpte_invalidate(unsigned long slot, unsigned long vpn,
 				   int psize, int ssize, int local)
 {
 	struct hash_pte *hptep = htab_address + slot;
@@ -325,9 +346,9 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va,
 
 	local_irq_save(flags);
 
-	DBG_LOW("    invalidate(va=%016lx, hash: %x)\n", va, slot);
+	DBG_LOW("    invalidate(vpn=%016lx, hash: %lx)\n", vpn, slot);
 
-	want_v = hpte_encode_v(va, psize, ssize);
+	want_v = hpte_encode_v(vpn, psize, ssize);
 	native_lock_hpte(hptep);
 	hpte_v = hptep->v;
 
@@ -339,7 +360,7 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va,
 		hptep->v = 0;
 
 	/* Invalidate the TLB */
-	tlbie(va, psize, ssize, local);
+	tlbie(vpn, psize, ssize, local);
 
 	local_irq_restore(flags);
 }
@@ -349,11 +370,12 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va,
 #define LP_MASK(i)	((0xFF >> (i)) << LP_SHIFT)
 
 static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
-			int *psize, int *ssize, unsigned long *va)
+			int *psize, int *ssize, unsigned long *vpn)
 {
+	unsigned long avpn, pteg, vpi;
 	unsigned long hpte_r = hpte->r;
 	unsigned long hpte_v = hpte->v;
-	unsigned long avpn;
+	unsigned long vsid, seg_off;
 	int i, size, shift, penc;
 
 	if (!(hpte_v & HPTE_V_LARGE))
@@ -380,32 +402,38 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 	}
 
 	/* This works for all page sizes, and for 256M and 1T segments */
+	*ssize = hpte_v >> HPTE_V_SSIZE_SHIFT;
 	shift = mmu_psize_defs[size].shift;
-	avpn = (HPTE_V_AVPN_VAL(hpte_v) & ~mmu_psize_defs[size].avpnm) << 23;
-
-	if (shift < 23) {
-		unsigned long vpi, vsid, pteg;
 
-		pteg = slot / HPTES_PER_GROUP;
-		if (hpte_v & HPTE_V_SECONDARY)
-			pteg = ~pteg;
-		switch (hpte_v >> HPTE_V_SSIZE_SHIFT) {
-		case MMU_SEGSIZE_256M:
-			vpi = ((avpn >> 28) ^ pteg) & htab_hash_mask;
-			break;
-		case MMU_SEGSIZE_1T:
-			vsid = avpn >> 40;
+	avpn = (HPTE_V_AVPN_VAL(hpte_v) & ~mmu_psize_defs[size].avpnm);
+	pteg = slot / HPTES_PER_GROUP;
+	if (hpte_v & HPTE_V_SECONDARY)
+		pteg = ~pteg;
+
+	switch (*ssize) {
+	case MMU_SEGSIZE_256M:
+		/* We only have 28 - 23 bits of seg_off in avpn */
+		seg_off = (avpn & 0x1f) << 23;
+		vsid    =  avpn >> 5;
+		/* We can find more bits from the pteg value */
+		if (shift < 23) {
+			vpi = (vsid ^ pteg) & htab_hash_mask;
+			seg_off |= vpi << shift;
+		}
+		*vpn = vsid << (SID_SHIFT - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+	case MMU_SEGSIZE_1T:
+		/* We only have 40 - 23 bits of seg_off in avpn */
+		seg_off = (avpn & 0x1ffff) << 23;
+		vsid    = avpn >> 17;
+		if (shift < 23) {
 			vpi = (vsid ^ (vsid << 25) ^ pteg) & htab_hash_mask;
-			break;
-		default:
-			avpn = vpi = size = 0;
+			seg_off |= vpi << shift;
 		}
-		avpn |= (vpi << mmu_psize_defs[size].shift);
+		*vpn = vsid << (SID_SHIFT_1T - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+	default:
+		*vpn = size = 0;
 	}
-
-	*va = avpn;
 	*psize = size;
-	*ssize = hpte_v >> HPTE_V_SSIZE_SHIFT;
 }
 
 /*
@@ -418,9 +446,10 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
  */
 static void native_hpte_clear(void)
 {
+	unsigned long vpn = 0;
 	unsigned long slot, slots, flags;
 	struct hash_pte *hptep = htab_address;
-	unsigned long hpte_v, va;
+	unsigned long hpte_v;
 	unsigned long pteg_count;
 	int psize, ssize;
 
@@ -448,9 +477,9 @@ static void native_hpte_clear(void)
 		 * already hold the native_tlbie_lock.
 		 */
 		if (hpte_v & HPTE_V_VALID) {
-			hpte_decode(hptep, slot, &psize, &ssize, &va);
+			hpte_decode(hptep, slot, &psize, &ssize, &vpn);
 			hptep->v = 0;
-			__tlbie(va, psize, ssize);
+			__tlbie(vpn, psize, ssize);
 		}
 	}
 
@@ -465,7 +494,8 @@ static void native_hpte_clear(void)
  */
 static void native_flush_hash_range(unsigned long number, int local)
 {
-	unsigned long va, hash, index, hidx, shift, slot;
+	unsigned long vpn;
+	unsigned long hash, index, hidx, shift, slot;
 	struct hash_pte *hptep;
 	unsigned long hpte_v;
 	unsigned long want_v;
@@ -479,18 +509,18 @@ static void native_flush_hash_range(unsigned long number, int local)
 	local_irq_save(flags);
 
 	for (i = 0; i < number; i++) {
-		va = batch->vaddr[i];
+		vpn = batch->vpn[i];
 		pte = batch->pte[i];
 
-		pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
-			hash = hpt_hash(va, shift, ssize);
+		pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
+			hash = hpt_hash(vpn, shift, ssize);
 			hidx = __rpte_to_hidx(pte, index);
 			if (hidx & _PTEIDX_SECONDARY)
 				hash = ~hash;
 			slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 			slot += hidx & _PTEIDX_GROUP_IX;
 			hptep = htab_address + slot;
-			want_v = hpte_encode_v(va, psize, ssize);
+			want_v = hpte_encode_v(vpn, psize, ssize);
 			native_lock_hpte(hptep);
 			hpte_v = hptep->v;
 			if (!HPTE_V_COMPARE(hpte_v, want_v) ||
@@ -505,12 +535,12 @@ static void native_flush_hash_range(unsigned long number, int local)
 	    mmu_psize_defs[psize].tlbiel && local) {
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
-			va = batch->vaddr[i];
+			vpn = batch->vpn[i];
 			pte = batch->pte[i];
 
-			pte_iterate_hashed_subpages(pte, psize, va, index,
-						    shift) {
-				__tlbiel(va, psize, ssize);
+			pte_iterate_hashed_subpages(pte, psize,
+						    vpn, index, shift) {
+				__tlbiel(vpn, psize, ssize);
 			} pte_iterate_hashed_end();
 		}
 		asm volatile("ptesync":::"memory");
@@ -522,12 +552,12 @@ static void native_flush_hash_range(unsigned long number, int local)
 
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
-			va = batch->vaddr[i];
+			vpn = batch->vpn[i];
 			pte = batch->pte[i];
 
-			pte_iterate_hashed_subpages(pte, psize, va, index,
-						    shift) {
-				__tlbie(va, psize, ssize);
+			pte_iterate_hashed_subpages(pte, psize,
+						    vpn, index, shift) {
+				__tlbie(vpn, psize, ssize);
 			} pte_iterate_hashed_end();
 		}
 		asm volatile("eieio; tlbsync; ptesync":::"memory");
@@ -539,29 +569,6 @@ static void native_flush_hash_range(unsigned long number, int local)
 	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_PPC_PSERIES
-/* Disable TLB batching on nighthawk */
-static inline int tlb_batching_enabled(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	int enabled = 1;
-
-	if (root) {
-		const char *model = of_get_property(root, "model", NULL);
-		if (model && !strcmp(model, "IBM,9076-N81"))
-			enabled = 0;
-		of_node_put(root);
-	}
-
-	return enabled;
-}
-#else
-static inline int tlb_batching_enabled(void)
-{
-	return 1;
-}
-#endif
-
 void __init hpte_init_native(void)
 {
 	ppc_md.hpte_invalidate	= native_hpte_invalidate;
@@ -570,6 +577,5 @@ void __init hpte_init_native(void)
 	ppc_md.hpte_insert	= native_hpte_insert;
 	ppc_md.hpte_remove	= native_hpte_remove;
 	ppc_md.hpte_clear_all	= native_hpte_clear;
-	if (tlb_batching_enabled())
-		ppc_md.flush_hash_range = native_flush_hash_range;
+	ppc_md.flush_hash_range = native_flush_hash_range;
 }
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 377e5cbedbbb..3a292be2e079 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -43,7 +43,6 @@
 #include <asm/uaccess.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
-#include <asm/abs_addr.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
 #include <asm/eeh.h>
@@ -192,18 +191,18 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 	     vaddr += step, paddr += step) {
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
-		unsigned long va = hpt_va(vaddr, vsid, ssize);
+		unsigned long vpn  = hpt_vpn(vaddr, vsid, ssize);
 		unsigned long tprot = prot;
 
 		/* Make kernel text executable */
 		if (overlaps_kernel_text(vaddr, vaddr + step))
 			tprot &= ~HPTE_R_N;
 
-		hash = hpt_hash(va, shift, ssize);
+		hash = hpt_hash(vpn, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
+		ret = ppc_md.hpte_insert(hpteg, vpn, paddr, tprot,
 					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
@@ -651,7 +650,7 @@ static void __init htab_initialize(void)
 		DBG("Hash table allocated at %lx, size: %lx\n", table,
 		    htab_size_bytes);
 
-		htab_address = abs_to_virt(table);
+		htab_address = __va(table);
 
 		/* htab absolute addr + encoded htabsize */
 		_SDR1 = table + __ilog2(pteg_count) - 11;
@@ -804,16 +803,19 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 #ifdef CONFIG_PPC_MM_SLICES
 unsigned int get_paca_psize(unsigned long addr)
 {
-	unsigned long index, slices;
+	u64 lpsizes;
+	unsigned char *hpsizes;
+	unsigned long index, mask_index;
 
 	if (addr < SLICE_LOW_TOP) {
-		slices = get_paca()->context.low_slices_psize;
+		lpsizes = get_paca()->context.low_slices_psize;
 		index = GET_LOW_SLICE_INDEX(addr);
-	} else {
-		slices = get_paca()->context.high_slices_psize;
-		index = GET_HIGH_SLICE_INDEX(addr);
+		return (lpsizes >> (index * 4)) & 0xF;
 	}
-	return (slices >> (index * 4)) & 0xF;
+	hpsizes = get_paca()->context.high_slices_psize;
+	index = GET_HIGH_SLICE_INDEX(addr);
+	mask_index = index & 0x1;
+	return (hpsizes[index >> 1] >> (mask_index * 4)) & 0xF;
 }
 
 #else
@@ -1153,21 +1155,21 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 /* WARNING: This is called from hash_low_64.S, if you change this prototype,
  *          do not forget to update the assembly call site !
  */
-void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize,
+void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, int ssize,
 		     int local)
 {
 	unsigned long hash, index, shift, hidx, slot;
 
-	DBG_LOW("flush_hash_page(va=%016lx)\n", va);
-	pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
-		hash = hpt_hash(va, shift, ssize);
+	DBG_LOW("flush_hash_page(vpn=%016lx)\n", vpn);
+	pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
+		hash = hpt_hash(vpn, shift, ssize);
 		hidx = __rpte_to_hidx(pte, index);
 		if (hidx & _PTEIDX_SECONDARY)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		slot += hidx & _PTEIDX_GROUP_IX;
 		DBG_LOW(" sub %ld: hash=%lx, hidx=%lx\n", index, slot, hidx);
-		ppc_md.hpte_invalidate(slot, va, psize, ssize, local);
+		ppc_md.hpte_invalidate(slot, vpn, psize, ssize, local);
 	} pte_iterate_hashed_end();
 }
 
@@ -1181,7 +1183,7 @@ void flush_hash_range(unsigned long number, int local)
 			&__get_cpu_var(ppc64_tlb_batch);
 
 		for (i = 0; i < number; i++)
-			flush_hash_page(batch->vaddr[i], batch->pte[i],
+			flush_hash_page(batch->vpn[i], batch->pte[i],
 					batch->psize, batch->ssize, local);
 	}
 }
@@ -1208,14 +1210,14 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 {
 	unsigned long hash, hpteg;
 	unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
-	unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize);
+	unsigned long vpn = hpt_vpn(vaddr, vsid, mmu_kernel_ssize);
 	unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL);
 	int ret;
 
-	hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize);
+	hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
 	hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
-	ret = ppc_md.hpte_insert(hpteg, va, __pa(vaddr),
+	ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
 				 mode, HPTE_V_BOLTED,
 				 mmu_linear_psize, mmu_kernel_ssize);
 	BUG_ON (ret < 0);
@@ -1229,9 +1231,9 @@ static void kernel_unmap_linear_page(unsigned long vaddr, unsigned long lmi)
 {
 	unsigned long hash, hidx, slot;
 	unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
-	unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize);
+	unsigned long vpn = hpt_vpn(vaddr, vsid, mmu_kernel_ssize);
 
-	hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize);
+	hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
 	spin_lock(&linear_map_hash_lock);
 	BUG_ON(!(linear_map_hash_slots[lmi] & 0x80));
 	hidx = linear_map_hash_slots[lmi] & 0x7f;
@@ -1241,7 +1243,7 @@ static void kernel_unmap_linear_page(unsigned long vaddr, unsigned long lmi)
 		hash = ~hash;
 	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 	slot += hidx & _PTEIDX_GROUP_IX;
-	ppc_md.hpte_invalidate(slot, va, mmu_linear_psize, mmu_kernel_ssize, 0);
+	ppc_md.hpte_invalidate(slot, vpn, mmu_linear_psize, mmu_kernel_ssize, 0);
 }
 
 void kernel_map_pages(struct page *page, int numpages, int enable)
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index cc5c273086cf..cecad348f604 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -18,14 +18,15 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, int local, int ssize,
 		     unsigned int shift, unsigned int mmu_psize)
 {
+	unsigned long vpn;
 	unsigned long old_pte, new_pte;
-	unsigned long va, rflags, pa, sz;
+	unsigned long rflags, pa, sz;
 	long slot;
 
 	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
 
 	/* Search the Linux page table for a match with va */
-	va = hpt_va(ea, vsid, ssize);
+	vpn = hpt_vpn(ea, vsid, ssize);
 
 	/* At this point, we have a pte (old_pte) which can be used to build
 	 * or update an HPTE. There are 2 cases:
@@ -69,19 +70,19 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		/* There MIGHT be an HPTE for this pte */
 		unsigned long hash, slot;
 
-		hash = hpt_hash(va, shift, ssize);
+		hash = hpt_hash(vpn, shift, ssize);
 		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		slot += (old_pte & _PAGE_F_GIX) >> 12;
 
-		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
+		if (ppc_md.hpte_updatepp(slot, rflags, vpn, mmu_psize,
 					 ssize, local) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
 	if (likely(!(old_pte & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(va, shift, ssize);
+		unsigned long hash = hpt_hash(vpn, shift, ssize);
 		unsigned long hpte_group;
 
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
@@ -101,14 +102,14 @@ repeat:
 				      _PAGE_COHERENT | _PAGE_GUARDED));
 
 		/* Insert into the hash table, primary slot */
-		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+		slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
 					  mmu_psize, ssize);
 
 		/* Primary is full, try the secondary */
 		if (unlikely(slot == -1)) {
 			hpte_group = ((~hash & htab_hash_mask) *
 				      HPTES_PER_GROUP) & ~0x7UL;
-			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
+			slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags,
 						  HPTE_V_SECONDARY,
 						  mmu_psize, ssize);
 			if (slot == -1) {
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 620b7acd2fdf..95a45293e5ac 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -62,7 +62,6 @@
 #include <asm/cputable.h>
 #include <asm/sections.h>
 #include <asm/iommu.h>
-#include <asm/abs_addr.h>
 #include <asm/vdso.h>
 
 #include "mmu_decl.h"
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index baaafde7d135..0dba5066c22a 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -62,7 +62,7 @@
 
 int init_bootmem_done;
 int mem_init_done;
-phys_addr_t memory_limit;
+unsigned long long memory_limit;
 
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
@@ -300,8 +300,7 @@ void __init mem_init(void)
 	unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
 
 #ifdef CONFIG_SWIOTLB
-	if (ppc_swiotlb_enable)
-		swiotlb_init(1);
+	swiotlb_init(0);
 #endif
 
 	num_physpages = memblock_phys_mem_size() >> PAGE_SHIFT;
@@ -469,6 +468,7 @@ void flush_dcache_icache_page(struct page *page)
 	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
 #endif
 }
+EXPORT_SYMBOL(flush_dcache_icache_page);
 
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 40677aa0190e..40bc5b0ace54 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -30,11 +30,13 @@ static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
 /*
- * The proto-VSID space has 2^35 - 1 segments available for user mappings.
- * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
- * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
+ * available for user mappings. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
  */
-#define MAX_CONTEXT	((1UL << 19) - 1)
+#define MAX_CONTEXT	((1UL << CONTEXT_BITS) - 1)
 
 int __init_new_context(void)
 {
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 39b159751c35..59213cfaeca9 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu,
 
 /*
  * Update the node maps and sysfs entries for each cpu whose home node
- * has changed.
+ * has changed. Returns 1 when the topology has changed, and 0 otherwise.
  */
 int arch_update_cpu_topology(void)
 {
-	int cpu, nid, old_nid;
+	int cpu, nid, old_nid, changed = 0;
 	unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
 	struct device *dev;
 
@@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void)
 		dev = get_cpu_device(cpu);
 		if (dev)
 			kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+		changed = 1;
 	}
 
-	return 1;
+	return changed;
 }
 
 static void topology_work_fn(struct work_struct *work)
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 249a0631c4db..e212a271c7a4 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -51,13 +51,22 @@
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
-#include <asm/abs_addr.h>
 #include <asm/firmware.h>
 
 #include "mmu_decl.h"
 
-unsigned long ioremap_bot = IOREMAP_BASE;
+/* Some sanity checking */
+#if TASK_SIZE_USER64 > PGTABLE_RANGE
+#error TASK_SIZE_USER64 exceeds pagetable range
+#endif
+
+#ifdef CONFIG_PPC_STD_MMU_64
+#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#error TASK_SIZE_USER64 exceeds user VSID range
+#endif
+#endif
 
+unsigned long ioremap_bot = IOREMAP_BASE;
 
 #ifdef CONFIG_PPC_MMU_NOHASH
 static void *early_alloc_pgtable(unsigned long size)
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index b9ee79ce2200..1a16ca227757 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -56,6 +56,12 @@ _GLOBAL(slb_allocate_realmode)
 	 */
 _GLOBAL(slb_miss_kernel_load_linear)
 	li	r11,0
+	li	r9,0x1
+	/*
+	 * for 1T we shift 12 bits more.  slb_finish_load_1T will do
+	 * the necessary adjustment
+	 */
+	rldimi  r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
 BEGIN_FTR_SECTION
 	b	slb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
@@ -85,6 +91,12 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 	_GLOBAL(slb_miss_kernel_load_io)
 	li	r11,0
 6:
+	li	r9,0x1
+	/*
+	 * for 1T we shift 12 bits more.  slb_finish_load_1T will do
+	 * the necessary adjustment
+	 */
+	rldimi  r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
 BEGIN_FTR_SECTION
 	b	slb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
@@ -108,17 +120,31 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	 * between 4k and 64k standard page size
 	 */
 #ifdef CONFIG_PPC_MM_SLICES
+	/* r10 have esid */
 	cmpldi	r10,16
-
-	/* Get the slice index * 4 in r11 and matching slice size mask in r9 */
-	ld	r9,PACALOWSLICESPSIZE(r13)
-	sldi	r11,r10,2
+	/* below SLICE_LOW_TOP */
 	blt	5f
-	ld	r9,PACAHIGHSLICEPSIZE(r13)
-	srdi	r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT - 2)
-	andi.	r11,r11,0x3c
+	/*
+	 * Handle hpsizes,
+	 * r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index
+	 */
+	srdi    r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */
+	addi	r9,r11,PACAHIGHSLICEPSIZE
+	lbzx	r9,r13,r9		/* r9 is hpsizes[r11] */
+	/* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */
+	rldicl	r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63
+	b	6f
 
-5:	/* Extract the psize and multiply to get an array offset */
+5:
+	/*
+	 * Handle lpsizes
+	 * r9 is get_paca()->context.low_slices_psize, r11 is index
+	 */
+	ld	r9,PACALOWSLICESPSIZE(r13)
+	mr	r11,r10
+6:
+	sldi	r11,r11,2  /* index * 4 */
+	/* Extract the psize and multiply to get an array offset */
 	srd	r9,r9,r11
 	andi.	r9,r9,0xf
 	mulli	r9,r9,MMUPSIZEDEFSIZE
@@ -209,7 +235,11 @@ _GLOBAL(slb_allocate_user)
  */
 slb_finish_load:
 	ASM_VSID_SCRAMBLE(r10,r9,256M)
-	rldimi	r11,r10,SLB_VSID_SHIFT,16	/* combine VSID and flags */
+	/*
+	 * bits above VSID_BITS_256M need to be ignored from r10
+	 * also combine VSID and flags
+	 */
+	rldimi	r11,r10,SLB_VSID_SHIFT,(64 - (SLB_VSID_SHIFT + VSID_BITS_256M))
 
 	/* r3 = EA, r11 = VSID data */
 	/*
@@ -252,10 +282,10 @@ _GLOBAL(slb_compare_rr_to_size)
 	bge	1f
 
 	/* still room in the slb cache */
-	sldi	r11,r3,1		/* r11 = offset * sizeof(u16) */
-	rldicl	r10,r10,36,28		/* get low 16 bits of the ESID */
-	add	r11,r11,r13		/* r11 = (u16 *)paca + offset */
-	sth	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
+	sldi	r11,r3,2		/* r11 = offset * sizeof(u32) */
+	srdi    r10,r10,28		/* get the 36 bits of the ESID */
+	add	r11,r11,r13		/* r11 = (u32 *)paca + offset */
+	stw	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
 	addi	r3,r3,1			/* offset++ */
 	b	2f
 1:					/* offset >= SLB_CACHE_ENTRIES */
@@ -273,7 +303,11 @@ _GLOBAL(slb_compare_rr_to_size)
 slb_finish_load_1T:
 	srdi	r10,r10,40-28		/* get 1T ESID */
 	ASM_VSID_SCRAMBLE(r10,r9,1T)
-	rldimi	r11,r10,SLB_VSID_SHIFT_1T,16	/* combine VSID and flags */
+	/*
+	 * bits above VSID_BITS_1T need to be ignored from r10
+	 * also combine VSID and flags
+	 */
+	rldimi	r11,r10,SLB_VSID_SHIFT_1T,(64 - (SLB_VSID_SHIFT_1T + VSID_BITS_1T))
 	li	r10,MMU_SEGSIZE_1T
 	rldimi	r11,r10,SLB_VSID_SSIZE_SHIFT,0	/* insert segment size */
 
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 73709f7ce92c..5829d2a950d4 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -34,6 +34,11 @@
 #include <asm/mmu.h>
 #include <asm/spu.h>
 
+/* some sanity checks */
+#if (PGTABLE_RANGE >> 43) > SLICE_MASK_SIZE
+#error PGTABLE_RANGE exceeds slice_mask high_slices size
+#endif
+
 static DEFINE_SPINLOCK(slice_convert_lock);
 
 
@@ -42,7 +47,7 @@ int _slice_debug = 1;
 
 static void slice_print_mask(const char *label, struct slice_mask mask)
 {
-	char	*p, buf[16 + 3 + 16 + 1];
+	char	*p, buf[16 + 3 + 64 + 1];
 	int	i;
 
 	if (!_slice_debug)
@@ -54,7 +59,7 @@ static void slice_print_mask(const char *label, struct slice_mask mask)
 	*(p++) = '-';
 	*(p++) = ' ';
 	for (i = 0; i < SLICE_NUM_HIGH; i++)
-		*(p++) = (mask.high_slices & (1 << i)) ? '1' : '0';
+		*(p++) = (mask.high_slices & (1ul << i)) ? '1' : '0';
 	*(p++) = 0;
 
 	printk(KERN_DEBUG "%s:%s\n", label, buf);
@@ -84,8 +89,8 @@ static struct slice_mask slice_range_to_mask(unsigned long start,
 	}
 
 	if ((start + len) > SLICE_LOW_TOP)
-		ret.high_slices = (1u << (GET_HIGH_SLICE_INDEX(end) + 1))
-			- (1u << GET_HIGH_SLICE_INDEX(start));
+		ret.high_slices = (1ul << (GET_HIGH_SLICE_INDEX(end) + 1))
+			- (1ul << GET_HIGH_SLICE_INDEX(start));
 
 	return ret;
 }
@@ -135,26 +140,31 @@ static struct slice_mask slice_mask_for_free(struct mm_struct *mm)
 
 	for (i = 0; i < SLICE_NUM_HIGH; i++)
 		if (!slice_high_has_vma(mm, i))
-			ret.high_slices |= 1u << i;
+			ret.high_slices |= 1ul << i;
 
 	return ret;
 }
 
 static struct slice_mask slice_mask_for_size(struct mm_struct *mm, int psize)
 {
+	unsigned char *hpsizes;
+	int index, mask_index;
 	struct slice_mask ret = { 0, 0 };
 	unsigned long i;
-	u64 psizes;
+	u64 lpsizes;
 
-	psizes = mm->context.low_slices_psize;
+	lpsizes = mm->context.low_slices_psize;
 	for (i = 0; i < SLICE_NUM_LOW; i++)
-		if (((psizes >> (i * 4)) & 0xf) == psize)
+		if (((lpsizes >> (i * 4)) & 0xf) == psize)
 			ret.low_slices |= 1u << i;
 
-	psizes = mm->context.high_slices_psize;
-	for (i = 0; i < SLICE_NUM_HIGH; i++)
-		if (((psizes >> (i * 4)) & 0xf) == psize)
-			ret.high_slices |= 1u << i;
+	hpsizes = mm->context.high_slices_psize;
+	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+		mask_index = i & 0x1;
+		index = i >> 1;
+		if (((hpsizes[index] >> (mask_index * 4)) & 0xf) == psize)
+			ret.high_slices |= 1ul << i;
+	}
 
 	return ret;
 }
@@ -183,8 +193,10 @@ static void slice_flush_segments(void *parm)
 
 static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psize)
 {
+	int index, mask_index;
 	/* Write the new slice psize bits */
-	u64 lpsizes, hpsizes;
+	unsigned char *hpsizes;
+	u64 lpsizes;
 	unsigned long i, flags;
 
 	slice_dbg("slice_convert(mm=%p, psize=%d)\n", mm, psize);
@@ -201,14 +213,18 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 			lpsizes = (lpsizes & ~(0xful << (i * 4))) |
 				(((unsigned long)psize) << (i * 4));
 
-	hpsizes = mm->context.high_slices_psize;
-	for (i = 0; i < SLICE_NUM_HIGH; i++)
-		if (mask.high_slices & (1u << i))
-			hpsizes = (hpsizes & ~(0xful << (i * 4))) |
-				(((unsigned long)psize) << (i * 4));
-
+	/* Assign the value back */
 	mm->context.low_slices_psize = lpsizes;
-	mm->context.high_slices_psize = hpsizes;
+
+	hpsizes = mm->context.high_slices_psize;
+	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+		mask_index = i & 0x1;
+		index = i >> 1;
+		if (mask.high_slices & (1ul << i))
+			hpsizes[index] = (hpsizes[index] &
+					  ~(0xf << (mask_index * 4))) |
+				(((unsigned long)psize) << (mask_index * 4));
+	}
 
 	slice_dbg(" lsps=%lx, hsps=%lx\n",
 		  mm->context.low_slices_psize,
@@ -587,18 +603,19 @@ unsigned long arch_get_unmapped_area_topdown(struct file *filp,
 
 unsigned int get_slice_psize(struct mm_struct *mm, unsigned long addr)
 {
-	u64 psizes;
-	int index;
+	unsigned char *hpsizes;
+	int index, mask_index;
 
 	if (addr < SLICE_LOW_TOP) {
-		psizes = mm->context.low_slices_psize;
+		u64 lpsizes;
+		lpsizes = mm->context.low_slices_psize;
 		index = GET_LOW_SLICE_INDEX(addr);
-	} else {
-		psizes = mm->context.high_slices_psize;
-		index = GET_HIGH_SLICE_INDEX(addr);
+		return (lpsizes >> (index * 4)) & 0xf;
 	}
-
-	return (psizes >> (index * 4)) & 0xf;
+	hpsizes = mm->context.high_slices_psize;
+	index = GET_HIGH_SLICE_INDEX(addr);
+	mask_index = index & 0x1;
+	return (hpsizes[index >> 1] >> (mask_index * 4)) & 0xf;
 }
 EXPORT_SYMBOL_GPL(get_slice_psize);
 
@@ -618,7 +635,9 @@ EXPORT_SYMBOL_GPL(get_slice_psize);
  */
 void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 {
-	unsigned long flags, lpsizes, hpsizes;
+	int index, mask_index;
+	unsigned char *hpsizes;
+	unsigned long flags, lpsizes;
 	unsigned int old_psize;
 	int i;
 
@@ -639,15 +658,21 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 		if (((lpsizes >> (i * 4)) & 0xf) == old_psize)
 			lpsizes = (lpsizes & ~(0xful << (i * 4))) |
 				(((unsigned long)psize) << (i * 4));
+	/* Assign the value back */
+	mm->context.low_slices_psize = lpsizes;
 
 	hpsizes = mm->context.high_slices_psize;
-	for (i = 0; i < SLICE_NUM_HIGH; i++)
-		if (((hpsizes >> (i * 4)) & 0xf) == old_psize)
-			hpsizes = (hpsizes & ~(0xful << (i * 4))) |
-				(((unsigned long)psize) << (i * 4));
+	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+		mask_index = i & 0x1;
+		index = i >> 1;
+		if (((hpsizes[index] >> (mask_index * 4)) & 0xf) == old_psize)
+			hpsizes[index] = (hpsizes[index] &
+					  ~(0xf << (mask_index * 4))) |
+				(((unsigned long)psize) << (mask_index * 4));
+	}
+
+
 
-	mm->context.low_slices_psize = lpsizes;
-	mm->context.high_slices_psize = hpsizes;
 
 	slice_dbg(" lsps=%lx, hsps=%lx\n",
 		  mm->context.low_slices_psize,
@@ -660,18 +685,27 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 void slice_set_psize(struct mm_struct *mm, unsigned long address,
 		     unsigned int psize)
 {
+	unsigned char *hpsizes;
 	unsigned long i, flags;
-	u64 *p;
+	u64 *lpsizes;
 
 	spin_lock_irqsave(&slice_convert_lock, flags);
 	if (address < SLICE_LOW_TOP) {
 		i = GET_LOW_SLICE_INDEX(address);
-		p = &mm->context.low_slices_psize;
+		lpsizes = &mm->context.low_slices_psize;
+		*lpsizes = (*lpsizes & ~(0xful << (i * 4))) |
+			((unsigned long) psize << (i * 4));
 	} else {
+		int index, mask_index;
 		i = GET_HIGH_SLICE_INDEX(address);
-		p = &mm->context.high_slices_psize;
+		hpsizes = mm->context.high_slices_psize;
+		mask_index = i & 0x1;
+		index = i >> 1;
+		hpsizes[index] = (hpsizes[index] &
+				  ~(0xf << (mask_index * 4))) |
+			(((unsigned long)psize) << (mask_index * 4));
 	}
-	*p = (*p & ~(0xful << (i * 4))) | ((unsigned long) psize << (i * 4));
+
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
 
 #ifdef CONFIG_SPU_BASE
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 9106ebb118f5..3f8efa6f2997 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -20,7 +20,6 @@
 #include <asm/paca.h>
 #include <asm/cputable.h>
 #include <asm/prom.h>
-#include <asm/abs_addr.h>
 
 struct stab_entry {
 	unsigned long esid_data;
@@ -257,7 +256,7 @@ void __init stabs_alloc(void)
 		memset((void *)newstab, 0, HW_PAGE_SIZE);
 
 		paca[cpu].stab_addr = newstab;
-		paca[cpu].stab_real = virt_to_abs(newstab);
+		paca[cpu].stab_real = __pa(newstab);
 		printk(KERN_INFO "Segment table for CPU %d at 0x%llx "
 		       "virtual, 0x%llx absolute\n",
 		       cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index e4f8f1fc81a5..7c415ddde948 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -95,7 +95,8 @@ static void subpage_prot_clear(unsigned long addr, unsigned long len)
 	struct mm_struct *mm = current->mm;
 	struct subpage_prot_table *spt = &mm->context.spt;
 	u32 **spm, *spp;
-	int i, nw;
+	unsigned long i;
+	size_t nw;
 	unsigned long next, limit;
 
 	down_write(&mm->mmap_sem);
@@ -144,7 +145,8 @@ long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map)
 	struct mm_struct *mm = current->mm;
 	struct subpage_prot_table *spt = &mm->context.spt;
 	u32 **spm, *spp;
-	int i, nw;
+	unsigned long i;
+	size_t nw;
 	unsigned long next, limit;
 	int err;
 
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 31f18207970b..ae758b3ff72c 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -42,8 +42,9 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, unsigned long pte, int huge)
 {
+	unsigned long vpn;
 	struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch);
-	unsigned long vsid, vaddr;
+	unsigned long vsid;
 	unsigned int psize;
 	int ssize;
 	real_pte_t rpte;
@@ -86,7 +87,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 		vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
 		ssize = mmu_kernel_ssize;
 	}
-	vaddr = hpt_va(addr, vsid, ssize);
+	vpn = hpt_vpn(addr, vsid, ssize);
 	rpte = __real_pte(__pte(pte), ptep);
 
 	/*
@@ -96,7 +97,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 * and decide to use local invalidates instead...
 	 */
 	if (!batch->active) {
-		flush_hash_page(vaddr, rpte, psize, ssize, 0);
+		flush_hash_page(vpn, rpte, psize, ssize, 0);
 		put_cpu_var(ppc64_tlb_batch);
 		return;
 	}
@@ -122,7 +123,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 		batch->ssize = ssize;
 	}
 	batch->pte[i] = rpte;
-	batch->vaddr[i] = vaddr;
+	batch->vpn[i] = vpn;
 	batch->index = ++i;
 	if (i >= PPC64_TLB_BATCH_NR)
 		__flush_tlb_pending(batch);
@@ -146,7 +147,7 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
 	if (cpumask_equal(mm_cpumask(batch->mm), tmp))
 		local = 1;
 	if (i == 1)
-		flush_hash_page(batch->vaddr[0], batch->pte[0],
+		flush_hash_page(batch->vpn[0], batch->pte[0],
 				batch->psize, batch->ssize, local);
 	else
 		flush_hash_range(i, local);
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index f09d48e3268d..b4113bf86353 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -20,6 +20,8 @@
 #include <asm/pgtable.h>
 #include <asm/exception-64e.h>
 #include <asm/ppc-opcode.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_booke_hv_asm.h>
 
 #ifdef CONFIG_PPC_64K_PAGES
 #define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE+1)
@@ -37,12 +39,18 @@
  *                                                                    *
  **********************************************************************/
 
-.macro tlb_prolog_bolted addr
-	mtspr	SPRN_SPRG_TLB_SCRATCH,r13
+.macro tlb_prolog_bolted intnum addr
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r13
 	mfspr	r13,SPRN_SPRG_PACA
 	std	r10,PACA_EXTLB+EX_TLB_R10(r13)
 	mfcr	r10
 	std	r11,PACA_EXTLB+EX_TLB_R11(r13)
+#ifdef CONFIG_KVM_BOOKE_HV
+BEGIN_FTR_SECTION
+	mfspr	r11, SPRN_SRR1
+END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
+#endif
+	DO_KVM	\intnum, SPRN_SRR1
 	std	r16,PACA_EXTLB+EX_TLB_R16(r13)
 	mfspr	r16,\addr		/* get faulting address */
 	std	r14,PACA_EXTLB+EX_TLB_R14(r13)
@@ -61,12 +69,12 @@
 	ld	r15,PACA_EXTLB+EX_TLB_R15(r13)
 	TLB_MISS_RESTORE_STATS_BOLTED
 	ld	r16,PACA_EXTLB+EX_TLB_R16(r13)
-	mfspr	r13,SPRN_SPRG_TLB_SCRATCH
+	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
 .endm
 
 /* Data TLB miss */
 	START_EXCEPTION(data_tlb_miss_bolted)
-	tlb_prolog_bolted SPRN_DEAR
+	tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR
 
 	/* We need _PAGE_PRESENT and  _PAGE_ACCESSED set */
 
@@ -214,7 +222,7 @@ itlb_miss_fault_bolted:
 
 /* Instruction TLB miss */
 	START_EXCEPTION(instruction_tlb_miss_bolted)
-	tlb_prolog_bolted SPRN_SRR0
+	tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0
 
 	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
 	srdi	r15,r16,60		/* get region */
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 95ae77dec3f6..315f9495e9b2 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -21,6 +21,13 @@
 #include <asm/reg.h>
 
 #define dbg(args...)
+#define OPROFILE_PM_PMCSEL_MSK      0xffULL
+#define OPROFILE_PM_UNIT_SHIFT      60
+#define OPROFILE_PM_UNIT_MSK        0xfULL
+#define OPROFILE_MAX_PMC_NUM        3
+#define OPROFILE_PMSEL_FIELD_WIDTH  8
+#define OPROFILE_UNIT_FIELD_WIDTH   4
+#define MMCRA_SIAR_VALID_MASK       0x10000000ULL
 
 static unsigned long reset_value[OP_MAX_COUNTER];
 
@@ -31,6 +38,61 @@ static int use_slot_nums;
 static u32 mmcr0_val;
 static u64 mmcr1_val;
 static u64 mmcra_val;
+static u32 cntr_marked_events;
+
+static int power7_marked_instr_event(u64 mmcr1)
+{
+	u64 psel, unit;
+	int pmc, cntr_marked_events = 0;
+
+	/* Given the MMCR1 value, look at the field for each counter to
+	 * determine if it is a marked event.  Code based on the function
+	 * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c.
+	 */
+	for (pmc = 0; pmc < 4; pmc++) {
+		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
+				<< (OPROFILE_MAX_PMC_NUM - pmc)
+				* OPROFILE_MAX_PMC_NUM);
+		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
+				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
+		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
+				<< (OPROFILE_PM_UNIT_SHIFT
+				    - (pmc * OPROFILE_PMSEL_FIELD_WIDTH )));
+		unit = unit >> (OPROFILE_PM_UNIT_SHIFT
+				- (pmc * OPROFILE_PMSEL_FIELD_WIDTH));
+
+		switch (psel >> 4) {
+		case 2:
+			cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc;
+			break;
+		case 3:
+			if (psel == 0x3c) {
+				cntr_marked_events |= (pmc == 0) << pmc;
+				break;
+			}
+
+			if (psel == 0x3e) {
+				cntr_marked_events |= (pmc != 1) << pmc;
+				break;
+			}
+
+			cntr_marked_events |= 1 << pmc;
+			break;
+		case 4:
+		case 5:
+			cntr_marked_events |= (unit == 0xd) << pmc;
+			break;
+		case 6:
+			if (psel == 0x64)
+				cntr_marked_events |= (pmc >= 2) << pmc;
+			break;
+		case 8:
+			cntr_marked_events |= (unit == 0xd) << pmc;
+			break;
+		}
+	}
+	return cntr_marked_events;
+}
 
 static int power4_reg_setup(struct op_counter_config *ctr,
 			     struct op_system_config *sys,
@@ -47,6 +109,23 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	mmcr1_val = sys->mmcr1;
 	mmcra_val = sys->mmcra;
 
+	/* Power 7+ and newer architectures:
+	 * Determine which counter events in the group (the group of events is
+	 * specified by the bit settings in the MMCR1 register) are marked
+	 * events for use in the interrupt handler.  Do the calculation once
+	 * before OProfile starts.  Information is used in the interrupt
+	 * handler.  Starting with Power 7+ we only record the sample for
+	 * marked events if the SIAR valid bit is set.  For non marked events
+	 * the sample is always recorded.
+	 */
+	if (pvr_version_is(PVR_POWER7p))
+		cntr_marked_events = power7_marked_instr_event(mmcr1_val);
+	else
+		cntr_marked_events = 0; /* For older processors, set the bit map
+					 * to zero so the sample will always be
+					 * be recorded.
+					 */
+
 	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
 		reset_value[i] = 0x80000000UL - ctr[i].count;
 
@@ -61,10 +140,10 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	else
 		mmcr0_val |= MMCR0_PROBLEM_DISABLE;
 
-	if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
-	    __is_processor(PV_970) || __is_processor(PV_970FX) ||
-	    __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
-	    __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+	if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
+	    pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
+	    pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX) ||
+	    pvr_version_is(PVR_POWER5) || pvr_version_is(PVR_POWER5p))
 		use_slot_nums = 1;
 
 	return 0;
@@ -84,9 +163,9 @@ extern void ppc_enable_pmcs(void);
  */
 static inline int mmcra_must_set_sample(void)
 {
-	if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
-	    __is_processor(PV_970) || __is_processor(PV_970FX) ||
-	    __is_processor(PV_970MP) || __is_processor(PV_970GX))
+	if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
+	    pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
+	    pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX))
 		return 1;
 
 	return 0;
@@ -276,7 +355,7 @@ static bool pmc_overflow(unsigned long val)
 	 * PMCs because a user might set a period of less than 256 and we
 	 * don't want to mistakenly reset them.
 	 */
-	if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256))
+	if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256))
 		return true;
 
 	return false;
@@ -291,6 +370,7 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	int i;
 	unsigned int mmcr0;
 	unsigned long mmcra;
+	bool siar_valid = false;
 
 	mmcra = mfspr(SPRN_MMCRA);
 
@@ -300,11 +380,29 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	/* set the PMM bit (see comment below) */
 	mtmsrd(mfmsr() | MSR_PMM);
 
+	/* Check that the SIAR  valid bit in MMCRA is set to 1. */
+	if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK)
+		siar_valid = true;
+
 	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 		val = classic_ctr_read(i);
 		if (pmc_overflow(val)) {
 			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
+				/* Power 7+ and newer architectures:
+				 * If the event is a marked event, then only
+				 * save the sample if the SIAR valid bit is
+				 * set.  If the event is not marked, then
+				 * always save the sample.
+				 * Note, the Sample enable bit in the MMCRA
+				 * register must be set to 1 if the group
+				 * contains a marked event.
+				 */
+				if ((siar_valid &&
+				     (cntr_marked_events & (1 << i)))
+				    || !(cntr_marked_events & (1 << i)))
+					oprofile_add_ext_sample(pc, regs, i,
+								is_kernel);
+
 				classic_ctr_write(i, reset_value[i]);
 			} else {
 				classic_ctr_write(i, 0);
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 77b49ddda9d3..0db88f501f91 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -82,6 +82,11 @@ static inline int perf_intr_is_nmi(struct pt_regs *regs)
 	return 0;
 }
 
+static inline int siar_valid(struct pt_regs *regs)
+{
+	return 1;
+}
+
 #endif /* CONFIG_PPC32 */
 
 /*
@@ -106,14 +111,20 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
  * If we're not doing instruction sampling, give them the SDAR
  * (sampled data address).  If we are doing instruction sampling, then
  * only give them the SDAR if it corresponds to the instruction
- * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC
- * bit in MMCRA.
+ * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or
+ * the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA.
  */
 static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
 {
 	unsigned long mmcra = regs->dsisr;
-	unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
-		POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+	unsigned long sdsync;
+
+	if (ppmu->flags & PPMU_SIAR_VALID)
+		sdsync = POWER7P_MMCRA_SDAR_VALID;
+	else if (ppmu->flags & PPMU_ALT_SIPR)
+		sdsync = POWER6_MMCRA_SDSYNC;
+	else
+		sdsync = MMCRA_SDSYNC;
 
 	if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
 		*addrp = mfspr(SPRN_SDAR);
@@ -230,6 +241,24 @@ static inline int perf_intr_is_nmi(struct pt_regs *regs)
 	return !regs->softe;
 }
 
+/*
+ * On processors like P7+ that have the SIAR-Valid bit, marked instructions
+ * must be sampled only if the SIAR-valid bit is set.
+ *
+ * For unmarked instructions and for processors that don't have the SIAR-Valid
+ * bit, assume that SIAR is valid.
+ */
+static inline int siar_valid(struct pt_regs *regs)
+{
+	unsigned long mmcra = regs->dsisr;
+	int marked = mmcra & MMCRA_SAMPLE_ENABLE;
+
+	if ((ppmu->flags & PPMU_SIAR_VALID) && marked)
+		return mmcra & POWER7P_MMCRA_SIAR_VALID;
+
+	return 1;
+}
+
 #endif /* CONFIG_PPC64 */
 
 static void perf_event_interrupt(struct pt_regs *regs);
@@ -1291,6 +1320,7 @@ struct pmu power_pmu = {
 	.event_idx	= power_pmu_event_idx,
 };
 
+
 /*
  * A counter has overflowed; update its count and record
  * things if requested.  Note that interrupts are hard-disabled
@@ -1324,7 +1354,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			left += period;
 			if (left <= 0)
 				left = period;
-			record = 1;
+			record = siar_valid(regs);
 			event->hw.last_period = event->hw.sample_period;
 		}
 		if (left < 0x80000000LL)
@@ -1374,8 +1404,10 @@ unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
 	unsigned long use_siar = regs->result;
 
-	if (use_siar)
+	if (use_siar && siar_valid(regs))
 		return mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
+	else if (use_siar)
+		return 0;		// no valid instruction pointer
 	else
 		return regs->nip;
 }
@@ -1396,7 +1428,7 @@ static bool pmc_overflow(unsigned long val)
 	 * PMCs because a user might set a period of less than 256 and we
 	 * don't want to mistakenly reset them.
 	 */
-	if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256))
+	if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256))
 		return true;
 
 	return false;
@@ -1431,7 +1463,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 		if (!event->hw.idx || is_limited_pmc(event->hw.idx))
 			continue;
 		val = read_pmc(event->hw.idx);
-		if ((int)val < 0) {
+		if (pmc_overflow(val)) {
 			/* event has overflowed */
 			found = 1;
 			record_and_restart(event, val, regs);
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 1251e4d7e262..441af08edf43 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -373,6 +373,9 @@ static int __init init_power7_pmu(void)
 	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
 		return -ENODEV;
 
+	if (pvr_version_is(PVR_POWER7p))
+		power7_pmu.flags |= PPMU_SIAR_VALID;
+
 	return register_power_pmu(&power7_pmu);
 }
 
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index 97612068fae3..969dddcf3320 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -50,7 +50,7 @@ machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
  * Again, if your board needs to do things differently then create a
  * board.c file for it rather than adding it to this list.
  */
-static const char *board[] __initdata = {
+static const char * const board[] __initconst = {
 	"amcc,acadia",
 	"amcc,haleakala",
 	"amcc,kilauea",
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
index 9f6c33d63a42..6bd89a0e0dea 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -21,7 +21,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/rtc.h>
@@ -159,13 +158,8 @@ static void __init ppc47x_setup_arch(void)
 
 	/* No need to check the DMA config as we /know/ our windows are all of
  	 * RAM.  Lets hope that doesn't change */
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	swiotlb_detect_4g();
+
 	ppc47x_smp_init();
 }
 
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index c16999802ecf..b62508b113db 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,6 +2,7 @@ config PPC_MPC512x
 	bool "512x-based boards"
 	depends on 6xx
 	select FSL_SOC
+	select FB_FSL_DIU
 	select IPIC
 	select PPC_CLOCK
 	select PPC_PCI_CHOICE
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 1d8700ff60b0..9f771e05457c 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -54,14 +54,16 @@ static DEFINE_MUTEX(clocks_mutex);
 static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int dev_match = 0;
-	int id_match = 0;
+	int dev_match;
+	int id_match;
 
 	if (dev == NULL || id == NULL)
 		return clk;
 
 	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {
+		dev_match = id_match = 0;
+
 		if (dev == p->dev)
 			dev_match++;
 		if (strcmp(id, p->name) == 0)
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
index 926731f1ff01..ca1ca6669990 100644
--- a/arch/powerpc/platforms/512x/mpc5121_generic.c
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -26,7 +26,7 @@
 /*
  * list of supported boards
  */
-static const char *board[] __initdata = {
+static const char * const board[] __initconst = {
 	"prt,prtlvt",
 	NULL
 };
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index cfe958e94e1e..1650e090ef3a 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -191,8 +191,6 @@ mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
 
-#if defined(CONFIG_FB_FSL_DIU) || \
-    defined(CONFIG_FB_FSL_DIU_MODULE)
 static inline void mpc512x_free_bootmem(struct page *page)
 {
 	__ClearPageReserved(page);
@@ -220,7 +218,6 @@ void mpc512x_release_bootmem(void)
 	}
 	diu_ops.release_bootmem	= NULL;
 }
-#endif
 
 /*
  * Check if DIU was pre-initialized. If so, perform steps
@@ -323,15 +320,12 @@ void __init mpc512x_setup_diu(void)
 		}
 	}
 
-#if defined(CONFIG_FB_FSL_DIU) || \
-    defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= mpc512x_get_pixel_format;
 	diu_ops.set_gamma_table		= mpc512x_set_gamma_table;
 	diu_ops.set_monitor_port	= mpc512x_set_monitor_port;
 	diu_ops.set_pixel_clock		= mpc512x_set_pixel_clock;
 	diu_ops.valid_monitor_port	= mpc512x_valid_monitor_port;
 	diu_ops.release_bootmem		= mpc512x_release_bootmem;
-#endif
 }
 
 void __init mpc512x_init_IRQ(void)
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 01ffa64d2aa7..448d862bcf3d 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -172,7 +172,7 @@ static void __init lite5200_setup_arch(void)
 	mpc52xx_setup_pci();
 }
 
-static const char *board[] __initdata = {
+static const char * const board[] __initconst = {
 	"fsl,lite5200",
 	"fsl,lite5200b",
 	NULL,
diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c
index 17d91b7da315..070d315dd6cd 100644
--- a/arch/powerpc/platforms/52xx/media5200.c
+++ b/arch/powerpc/platforms/52xx/media5200.c
@@ -232,7 +232,7 @@ static void __init media5200_setup_arch(void)
 }
 
 /* list of the supported boards */
-static const char *board[] __initdata = {
+static const char * const board[] __initconst = {
 	"fsl,media5200",
 	NULL
 };
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c0aa04068d69..9cf36020cf0d 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -52,6 +52,7 @@ static void __init mpc5200_simple_setup_arch(void)
 static const char *board[] __initdata = {
 	"anonymous,a4m072",
 	"anon,charon",
+	"ifm,o2d",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index d61fb1c0c1a0..2351f9e0fb6f 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -170,7 +170,8 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
 	out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, bit_fields);
 
 	/* Kick it off */
-	out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
+	if (!lpbfifo.req->defer_xfer_start)
+		out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
 	if (dma)
 		bcom_enable(lpbfifo.bcom_cur_task);
 }
@@ -421,6 +422,38 @@ int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req)
 }
 EXPORT_SYMBOL(mpc52xx_lpbfifo_submit);
 
+int mpc52xx_lpbfifo_start_xfer(struct mpc52xx_lpbfifo_request *req)
+{
+	unsigned long flags;
+
+	if (!lpbfifo.regs)
+		return -ENODEV;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	/*
+	 * If the req pointer is already set and a transfer was
+	 * started on submit, then this transfer is in progress
+	 */
+	if (lpbfifo.req && !lpbfifo.req->defer_xfer_start) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return -EBUSY;
+	}
+
+	/*
+	 * If the req was previously submitted but not
+	 * started, start it now
+	 */
+	if (lpbfifo.req && lpbfifo.req == req &&
+	    lpbfifo.req->defer_xfer_start) {
+		out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
+	}
+
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_start_xfer);
+
 void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req)
 {
 	unsigned long flags;
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 16c9c9cbbb7f..eca1f0960fff 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -60,7 +60,7 @@ static void __init mpc837x_rdb_setup_arch(void)
 
 machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
 
-static const char *board[] __initdata = {
+static const char * const board[] __initconst = {
 	"fsl,mpc8377rdb",
 	"fsl,mpc8378rdb",
 	"fsl,mpc8379rdb",
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 1a046715e461..1d769a29249f 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -326,7 +326,7 @@ static int pmc_probe(struct platform_device *ofdev)
 	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
-	struct pmc_type *type;
+	const struct pmc_type *type;
 	int ret = 0;
 
 	match = of_match_device(pmc_match, &ofdev->dev);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 159c01e91463..02d02a09942d 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -104,6 +104,13 @@ config P1022_DS
 	help
 	  This option enables support for the Freescale P1022DS reference board.
 
+config P1022_RDK
+	bool "Freescale / iVeia P1022 RDK"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Freescale / iVeia P1022RDK
+	  reference board.
+
 config P1023_RDS
 	bool "Freescale P1023 RDS"
 	select DEFAULT_UIMAGE
@@ -254,6 +261,20 @@ config P5020_DS
 	help
 	  This option enables support for the P5020 DS board
 
+config P5040_DS
+	bool "Freescale P5040 DS"
+	select DEFAULT_UIMAGE
+	select E500
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
+	select HAS_RAPIDIO
+	select PPC_EPAPR_HV_PIC
+	help
+	  This option enables support for the P5040 DS board
+
 config PPC_QEMU_E500
 	bool "QEMU generic e500 platform"
 	depends on EXPERIMENTAL
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 3dfe81175036..76f679cb04a0 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -15,11 +15,13 @@ obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
+obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
 obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
+obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 67dac22b4363..d0861a0d8360 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -27,6 +27,16 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
 	{ .compatible = "fsl,mpc8548-guts", },
 	/* Probably unnecessary? */
 	{ .compatible = "gpio-leds", },
+	/* For all PCI controllers */
+	{ .compatible = "fsl,mpc8540-pci", },
+	{ .compatible = "fsl,mpc8548-pcie", },
+	{ .compatible = "fsl,p1022-pcie", },
+	{ .compatible = "fsl,p1010-pcie", },
+	{ .compatible = "fsl,p1023-pcie", },
+	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
+	{ .compatible = "fsl,qoriq-pcie-v2.3", },
+	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 925b02874233..ed69c9250717 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -16,7 +16,6 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -52,37 +51,16 @@ void __init corenet_ds_pic_init(void)
  */
 void __init corenet_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,p4080-pcie") ||
-		    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2")) {
-			fsl_add_bridge(np, 0);
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
 	pci_devs_phb_init();
 #endif
-#endif
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
+
 	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
 }
 
@@ -99,6 +77,12 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
 	{
 		.compatible	= "fsl,qoriq-pcie-v2.2",
 	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.3",
+	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.4",
+	},
 	/* The following two are for the Freescale hypervisor */
 	{
 		.name		= "hypervisor",
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
index b6a728b0a8ca..e6285ae6f423 100644
--- a/arch/powerpc/platforms/85xx/ge_imp3a.c
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -22,7 +22,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -84,53 +83,39 @@ void __init ge_imp3a_pic_init(void)
 	of_node_put(cascade_node);
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif	/* CONFIG_PCI */
-
-/*
- * Setup the architecture
- */
-static void __init ge_imp3a_setup_arch(void)
+static void ge_imp3a_pci_assign_primary(void)
 {
-	struct device_node *regs;
 #ifdef CONFIG_PCI
 	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
+	struct resource rsrc;
 
-	if (ppc_md.progress)
-		ppc_md.progress("ge_imp3a_setup_arch()", 0);
-
-#ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
 		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
+			if ((rsrc.start & 0xfffff) == 0x9000)
+				fsl_pci_primary = np;
 		}
 	}
 #endif
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+	struct device_node *regs;
+
+	if (ppc_md.progress)
+		ppc_md.progress("ge_imp3a_setup_arch()", 0);
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	ge_imp3a_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
@@ -215,17 +200,10 @@ static int __init ge_imp3a_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x9000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return of_flat_dt_is_compatible(root, "ge,IMP3A");
 }
 
-machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
 
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 767c7cf18a9c..15ce4b55f117 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -17,7 +17,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -46,46 +45,17 @@ void __init mpc8536_ds_pic_init(void)
  */
 static void __init mpc8536_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-#endif
+	fsl_pci_assign_primary();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	swiotlb_detect_4g();
 
 	printk("MPC8536 DS board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 29ee8fcd75a2..7d12a19aa7ee 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -137,10 +137,6 @@ static void __init init_ioports(void)
 
 static void __init mpc85xx_ads_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
 
@@ -150,11 +146,10 @@ static void __init mpc85xx_ads_setup_arch(void)
 #endif
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+
+	fsl_pci_assign_primary();
 }
 
 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
@@ -173,7 +168,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 11156fb53d83..c474505ad0d0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -276,6 +276,33 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
 
 #endif /* CONFIG_PPC_I8259 */
 
+static void mpc85xx_cds_pci_assign_primary(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	if (fsl_pci_primary)
+		return;
+
+	/*
+	 * MPC85xx_CDS has ISA bridge but unfortunately there is no
+	 * isa node in device tree. We now looking for i8259 node as
+	 * a workaround for such a broken device tree. This routine
+	 * is for complying to all device trees.
+	 */
+	np = of_find_node_by_name(NULL, "i8259");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
+
+		if ((of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) &&
+		    of_device_is_available(np))
+			return;
+	}
+#endif
+}
+
 /*
  * Setup the architecture
  */
@@ -309,21 +336,12 @@ static void __init mpc85xx_cds_setup_arch(void)
 	}
 
 #ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-
 	ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+
+	mpc85xx_cds_pci_assign_primary();
+	fsl_pci_assign_primary();
 }
 
 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
@@ -355,7 +373,7 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
-machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
 
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 6d3265fe7718..9ebb91ed96a3 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -20,7 +20,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -129,13 +128,11 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 }
 #endif	/* CONFIG_PCI */
 
-static void __init mpc85xx_ds_pci_init(void)
+static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *node;
 
-	fsl_pci_init();
-
 	/* See if we have a ULI under the primary */
 
 	node = of_find_node_by_name(NULL, "uli1575");
@@ -159,7 +156,9 @@ static void __init mpc85xx_ds_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
 
-	mpc85xx_ds_pci_init();
+	swiotlb_detect_4g();
+	fsl_pci_assign_primary();
+	mpc85xx_ds_uli_init();
 	mpc85xx_smp_init();
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
@@ -175,9 +174,9 @@ static int __init mpc8544_ds_probe(void)
 	return !!of_flat_dt_is_compatible(root, "MPC8544DS");
 }
 
-machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 8e4b094c553b..8498f7323470 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -327,44 +327,16 @@ static void __init mpc85xx_mds_qeic_init(void) { }
 
 static void __init mpc85xx_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct pci_controller *hose;
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-#endif
-
 	mpc85xx_smp_init();
 
 	mpc85xx_mds_qe_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 }
 
 
@@ -409,9 +381,9 @@ static int __init mpc85xx_publish_devices(void)
 	return mpc85xx_common_publish_devices();
 }
 
-machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
-machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 1910fdcb75b2..ede8771d6f02 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -86,23 +86,17 @@ void __init mpc85xx_rdb_pic_init(void)
  */
 static void __init mpc85xx_rdb_setup_arch(void)
 {
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#ifdef CONFIG_QUICC_ENGINE
 	struct device_node *np;
 #endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
-			fsl_add_bridge(np, 0);
-	}
-
-#endif
-
 	mpc85xx_smp_init();
 
+	fsl_pci_assign_primary();
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -161,15 +155,15 @@ qe_fail:
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1024_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index dbaf44354f0d..0252961392d5 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -46,25 +46,15 @@ void __init p1010_rdb_pic_init(void)
  */
 static void __init p1010_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1010_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,p1010-pcie"))
-			fsl_add_bridge(np, 0);
-	}
-
-#endif
+	fsl_pci_assign_primary();
 
 	printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1010_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
 
 /*
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 3c732acf331d..848a3e98e1c1 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -18,7 +18,6 @@
 
 #include <linux/pci.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 #include <asm/div64.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
@@ -507,32 +506,9 @@ early_param("video", early_video_setup);
  */
 static void __init p1022_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1022_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
-		struct resource rsrc;
-		struct pci_controller *hose;
-
-		of_address_to_resource(np, 0, &rsrc);
-
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-#endif
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= p1022ds_get_pixel_format;
 	diu_ops.set_gamma_table		= p1022ds_set_gamma_table;
@@ -601,18 +577,14 @@ static void __init p1022_ds_setup_arch(void)
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	pr_info("Freescale P1022 DS reference board\n");
 }
 
-machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
 
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
new file mode 100644
index 000000000000..55ffa1cc380c
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -0,0 +1,167 @@
+/*
+ * P1022 RDK board specific routines
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Based on p1022_ds.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <asm/div64.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
+#include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
+#define CLKDVDR_PXCKEN		0x80000000
+#define CLKDVDR_PXCKINV		0x10000000
+#define CLKDVDR_PXCKDLY		0x06000000
+#define CLKDVDR_PXCLK_MASK	0x00FF0000
+
+/**
+ * p1022rdk_set_monitor_port: switch the output to a different monitor port
+ */
+static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port)
+{
+	if (port != FSL_DIU_PORT_DVI) {
+		pr_err("p1022rdk: unsupported monitor port %i\n", port);
+		return;
+	}
+}
+
+/**
+ * p1022rdk_set_pixel_clock: program the DIU's clock
+ *
+ * @pixclock: the wavelength, in picoseconds, of the clock
+ */
+void p1022rdk_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *guts_np = NULL;
+	struct ccsr_guts __iomem *guts;
+	unsigned long freq;
+	u64 temp;
+	u32 pxclk;
+
+	/* Map the global utilities registers. */
+	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+	if (!guts_np) {
+		pr_err("p1022rdk: missing global utilties device node\n");
+		return;
+	}
+
+	guts = of_iomap(guts_np, 0);
+	of_node_put(guts_np);
+	if (!guts) {
+		pr_err("p1022rdk: could not map global utilties device\n");
+		return;
+	}
+
+	/* Convert pixclock from a wavelength to a frequency */
+	temp = 1000000000000ULL;
+	do_div(temp, pixclock);
+	freq = temp;
+
+	/*
+	 * 'pxclk' is the ratio of the platform clock to the pixel clock.
+	 * This number is programmed into the CLKDVDR register, and the valid
+	 * range of values is 2-255.
+	 */
+	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+	pxclk = clamp_t(u32, pxclk, 2, 255);
+
+	/* Disable the pixel clock, and set it to non-inverted and no delay */
+	clrbits32(&guts->clkdvdr,
+		  CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
+
+	/* Enable the clock and set the pxclk */
+	setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
+
+	iounmap(guts);
+}
+
+/**
+ * p1022rdk_valid_monitor_port: set the monitor port for sysfs
+ */
+enum fsl_diu_monitor_port
+p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+	return FSL_DIU_PORT_DVI;
+}
+
+#endif
+
+void __init p1022_rdk_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+		MPIC_SINGLE_DEST_CPU,
+		0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init p1022_rdk_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("p1022_rdk_setup_arch()", 0);
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.set_monitor_port	= p1022rdk_set_monitor_port;
+	diu_ops.set_pixel_clock		= p1022rdk_set_pixel_clock;
+	diu_ops.valid_monitor_port	= p1022rdk_valid_monitor_port;
+#endif
+
+	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
+
+	pr_info("Freescale / iVeia P1022 RDK reference board\n");
+}
+
+machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(p1022_rdk, swiotlb_setup_bus_notifier);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p1022_rdk_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,p1022rdk");
+}
+
+define_machine(p1022_rdk) {
+	.name			= "P1022 RDK",
+	.probe			= p1022_rdk_probe,
+	.setup_arch		= p1022_rdk_setup_arch,
+	.init_IRQ		= p1022_rdk_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 2990e8b13dc9..9cc60a738834 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -80,15 +80,12 @@ static void __init mpc85xx_rds_setup_arch(void)
 		}
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1023-pcie")
-		fsl_add_bridge(np, 0);
-#endif
-
 	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
 
 static void __init mpc85xx_rds_pic_init(void)
 {
diff --git a/arch/powerpc/platforms/85xx/p2041_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c
index 6541fa2630c0..000c0892fc40 100644
--- a/arch/powerpc/platforms/85xx/p2041_rdb.c
+++ b/arch/powerpc/platforms/85xx/p2041_rdb.c
@@ -80,7 +80,7 @@ define_machine(p2041_rdb) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
+machine_arch_initcall(p2041_rdb, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c
index f238efa75891..b3edc205daa9 100644
--- a/arch/powerpc/platforms/85xx/p3041_ds.c
+++ b/arch/powerpc/platforms/85xx/p3041_ds.c
@@ -82,7 +82,7 @@ define_machine(p3041_ds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p3041_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p3041_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c
index c92417dc6574..54df10632aea 100644
--- a/arch/powerpc/platforms/85xx/p4080_ds.c
+++ b/arch/powerpc/platforms/85xx/p4080_ds.c
@@ -81,7 +81,7 @@ define_machine(p4080_ds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p4080_ds, corenet_ds_publish_devices);
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
 #endif
diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c
index 17bef15a85ed..753a42c29d4d 100644
--- a/arch/powerpc/platforms/85xx/p5020_ds.c
+++ b/arch/powerpc/platforms/85xx/p5020_ds.c
@@ -91,7 +91,7 @@ define_machine(p5020_ds) {
 #endif
 };
 
-machine_device_initcall(p5020_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p5020_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/p5040_ds.c b/arch/powerpc/platforms/85xx/p5040_ds.c
new file mode 100644
index 000000000000..11381851828e
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p5040_ds.c
@@ -0,0 +1,89 @@
+/*
+ * P5040 DS Setup
+ *
+ * Copyright 2009-2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_fdt.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p5040_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_is_compatible(root, "fsl,P5040DS"))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_is_compatible(root, "fsl,P5040DS-hv")) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(p5040_ds) {
+	.name			= "P5040 DS",
+	.probe			= p5040_ds_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
+#ifdef CONFIG_PPC64
+	.get_irq		= mpic_get_irq,
+#else
+	.get_irq		= mpic_get_coreint_irq,
+#endif
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(p5040_ds, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);
+#endif
diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
index 95a2e53af71b..f6ea5618c733 100644
--- a/arch/powerpc/platforms/85xx/qemu_e500.c
+++ b/arch/powerpc/platforms/85xx/qemu_e500.c
@@ -41,7 +41,8 @@ static void __init qemu_e500_setup_arch(void)
 {
 	ppc_md.progress("qemu_e500_setup_arch()", 0);
 
-	fsl_pci_init();
+	fsl_pci_assign_primary();
+	swiotlb_detect_4g();
 	mpc85xx_smp_init();
 }
 
@@ -55,7 +56,7 @@ static int __init qemu_e500_probe(void)
 	return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
 }
 
-machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+machine_arch_initcall(qemu_e500, mpc85xx_common_publish_devices);
 
 define_machine(qemu_e500) {
 	.name			= "QEMU e500",
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index cd3a66bdb54b..f62121825914 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -88,26 +88,11 @@ static int __init sbc8548_hw_rev(void)
  */
 static void __init sbc8548_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8548_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-#endif
+	fsl_pci_assign_primary();
+
 	sbc_rev = sbc8548_hw_rev();
 }
 
@@ -128,7 +113,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index ff4249044a3c..6fcfa12e5c56 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -2,7 +2,7 @@
  * Author: Andy Fleming <afleming@freescale.com>
  * 	   Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2006-2008, 2011 Freescale Semiconductor Inc.
+ * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
+#include <linux/cpu.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -24,33 +25,118 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
+#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
 #include "smp.h"
 
-extern void __early_start(void);
-
-#define BOOT_ENTRY_ADDR_UPPER	0
-#define BOOT_ENTRY_ADDR_LOWER	1
-#define BOOT_ENTRY_R3_UPPER	2
-#define BOOT_ENTRY_R3_LOWER	3
-#define BOOT_ENTRY_RESV		4
-#define BOOT_ENTRY_PIR		5
-#define BOOT_ENTRY_R6_UPPER	6
-#define BOOT_ENTRY_R6_LOWER	7
-#define NUM_BOOT_ENTRY		8
-#define SIZE_BOOT_ENTRY		(NUM_BOOT_ENTRY * sizeof(u32))
-
-static int __init
-smp_85xx_kick_cpu(int nr)
+struct epapr_spin_table {
+	u32	addr_h;
+	u32	addr_l;
+	u32	r3_h;
+	u32	r3_l;
+	u32	reserved;
+	u32	pir;
+};
+
+static struct ccsr_guts __iomem *guts;
+static u64 timebase;
+static int tb_req;
+static int tb_valid;
+
+static void mpc85xx_timebase_freeze(int freeze)
+{
+	uint32_t mask;
+
+	mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
+	if (freeze)
+		setbits32(&guts->devdisr, mask);
+	else
+		clrbits32(&guts->devdisr, mask);
+
+	in_be32(&guts->devdisr);
+}
+
+static void mpc85xx_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	while (!tb_req)
+		barrier();
+	tb_req = 0;
+
+	mpc85xx_timebase_freeze(1);
+	timebase = get_tb();
+	mb();
+	tb_valid = 1;
+
+	while (tb_valid)
+		barrier();
+
+	mpc85xx_timebase_freeze(0);
+
+	local_irq_restore(flags);
+}
+
+static void mpc85xx_take_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tb_req = 1;
+	while (!tb_valid)
+		barrier();
+
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	isync();
+	tb_valid = 0;
+
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __cpuinit smp_85xx_mach_cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+	u32 tmp;
+
+	local_irq_disable();
+	idle_task_exit();
+	generic_set_cpu_dead(cpu);
+	mb();
+
+	mtspr(SPRN_TCR, 0);
+
+	__flush_disable_L1();
+	tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+	mtspr(SPRN_HID0, tmp);
+	isync();
+
+	/* Enter NAP mode. */
+	tmp = mfmsr();
+	tmp |= MSR_WE;
+	mb();
+	mtmsr(tmp);
+	isync();
+
+	while (1)
+		;
+}
+#endif
+
+static int __cpuinit smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
 	const u64 *cpu_rel_addr;
-	__iomem u32 *bptr_vaddr;
+	__iomem struct epapr_spin_table *spin_table;
 	struct device_node *np;
-	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
+	int hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
+	int ret = 0;
 
 	WARN_ON(nr < 0 || nr >= NR_CPUS);
 	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
@@ -75,46 +161,81 @@ smp_85xx_kick_cpu(int nr)
 
 	/* Map the spin table */
 	if (ioremappable)
-		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+		spin_table = ioremap(*cpu_rel_addr,
+				sizeof(struct epapr_spin_table));
 	else
-		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
+		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
-
-	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
 #ifdef CONFIG_PPC32
-	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
+#ifdef CONFIG_HOTPLUG_CPU
+	/* Corresponding to generic_set_cpu_dead() */
+	generic_set_cpu_up(nr);
+
+	if (system_state == SYSTEM_RUNNING) {
+		out_be32(&spin_table->addr_l, 0);
+
+		/*
+		 * We don't set the BPTR register here since it already points
+		 * to the boot page properly.
+		 */
+		mpic_reset_core(hw_cpu);
+
+		/* wait until core is ready... */
+		if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
+						10000, 100)) {
+			pr_err("%s: timeout waiting for core %d to reset\n",
+							__func__, hw_cpu);
+			ret = -ENOENT;
+			goto out;
+		}
+
+		/*  clear the acknowledge status */
+		__secondary_hold_acknowledge = -1;
+	}
+#endif
+	out_be32(&spin_table->pir, hw_cpu);
+	out_be32(&spin_table->addr_l, __pa(__early_start));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 
 	/* Wait a bit for the CPU to ack. */
-	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
-		mdelay(1);
+	if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
+					10000, 100)) {
+		pr_err("%s: timeout waiting for core %d to ack\n",
+						__func__, hw_cpu);
+		ret = -ENOENT;
+		goto out;
+	}
+out:
 #else
 	smp_generic_kick_cpu(nr);
 
-	out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER),
-		__pa((u64)*((unsigned long long *) generic_secondary_smp_init)));
+	out_be32(&spin_table->pir, hw_cpu);
+	out_be64((u64 *)(&spin_table->addr_h),
+	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 #endif
 
 	local_irq_restore(flags);
 
 	if (ioremappable)
-		iounmap(bptr_vaddr);
-
-	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
+		iounmap(spin_table);
 
-	return 0;
+	return ret;
 }
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= generic_cpu_disable,
+	.cpu_die	= generic_cpu_die,
+#endif
 #ifdef CONFIG_KEXEC
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
@@ -218,8 +339,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 }
 #endif /* CONFIG_KEXEC */
 
-static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+static void __cpuinit smp_85xx_setup_cpu(int cpu_nr)
 {
 	if (smp_85xx_ops.probe == smp_mpic_probe)
 		mpic_setup_this_cpu();
@@ -228,6 +348,16 @@ smp_85xx_setup_cpu(int cpu_nr)
 		doorbell_setup_this_cpu();
 }
 
+static const struct of_device_id mpc85xx_smp_guts_ids[] = {
+	{ .compatible = "fsl,mpc8572-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	{},
+};
+
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -249,6 +379,22 @@ void __init mpc85xx_smp_init(void)
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
 	}
 
+	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
+	if (np) {
+		guts = of_iomap(np, 0);
+		of_node_put(np);
+		if (!guts) {
+			pr_err("%s: Could not map guts node address\n",
+								__func__);
+			return;
+		}
+		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
+		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
+		ppc_md.cpu_die = smp_85xx_mach_cpu_die;
+#endif
+	}
+
 	smp_ops = &smp_85xx_ops;
 
 #ifdef CONFIG_KEXEC
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index b9c6daa07b66..ae368e0e1076 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -66,20 +66,13 @@ static void __init socrates_pic_init(void)
  */
 static void __init socrates_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("socrates_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(socrates, mpc85xx_common_publish_devices);
+machine_arch_initcall(socrates, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index e0508002b086..6f4939b6309e 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -60,21 +60,14 @@ static void __init stx_gp3_pic_init(void)
  */
 static void __init stx_gp3_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("stx_gp3_setup_arch()", 0);
 
+	fsl_pci_assign_primary();
+
 #ifdef CONFIG_CPM2
 	cpm2_reset();
 #endif
-
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
 }
 
 static void stx_gp3_show_cpuinfo(struct seq_file *m)
@@ -93,7 +86,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
+machine_arch_initcall(stx_gp3, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 3e70a2035e53..b4e58cdc09a5 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -59,10 +59,6 @@ static void __init tqm85xx_pic_init(void)
  */
 static void __init tqm85xx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("tqm85xx_setup_arch()", 0);
 
@@ -70,20 +66,7 @@ static void __init tqm85xx_setup_arch(void)
 	cpm2_reset();
 #endif
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			if (!of_address_to_resource(np, 0, &rsrc)) {
-				if ((rsrc.start & 0xfffff) == 0x8000)
-					fsl_add_bridge(np, 1);
-				else
-					fsl_add_bridge(np, 0);
-			}
-		}
-	}
-#endif
+	fsl_pci_assign_primary();
 }
 
 static void tqm85xx_show_cpuinfo(struct seq_file *m)
@@ -123,9 +106,9 @@ static void __devinit tqm85xx_ti1520_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
 		tqm85xx_ti1520_fixup);
 
-machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
+machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices);
 
-static const char *board[] __initdata = {
+static const char * const board[] __initconst = {
 	"tqc,tqm8540",
 	"tqc,tqm8541",
 	"tqc,tqm8548",
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 41c687550ea7..dcbf7e42dce7 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -111,18 +111,11 @@ static void xes_mpc85xx_fixups(void)
 	}
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif
-
 /*
  * Setup the architecture
  */
 static void __init xes_mpc85xx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
 	struct device_node *root;
 	const char *model = "Unknown";
 
@@ -137,26 +130,14 @@ static void __init xes_mpc85xx_setup_arch(void)
 
 	xes_mpc85xx_fixups();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-#endif
-
 	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
-machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
-machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -165,42 +146,21 @@ static int __init xes_mpc8572_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x8000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8572");
 }
 
 static int __init xes_mpc8548_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8548");
 }
 
 static int __init xes_mpc8540_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8540");
 }
 
 define_machine(xes_mpc8572) {
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 563aafa8629c..bf5338754c5a 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -73,13 +73,6 @@ static void __init gef_ppc9a_init_irq(void)
 static void __init gef_ppc9a_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
 
 	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
@@ -87,6 +80,8 @@ static void __init gef_ppc9a_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
 	if (regs) {
@@ -221,6 +216,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -231,7 +227,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
+machine_arch_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
 	.name			= "GE PPC9A",
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index cc6a91ae0889..0b7851330a07 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -73,20 +73,14 @@ static void __init gef_sbc310_init_irq(void)
 static void __init gef_sbc310_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
-
 	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
 	if (regs) {
@@ -209,6 +203,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -219,7 +214,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_sbc310, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
 	.name			= "GE SBC310",
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index aead6b337f4a..b9eb174897b1 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -73,13 +73,6 @@ static void __init gef_sbc610_init_irq(void)
 static void __init gef_sbc610_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
 
 	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
@@ -87,6 +80,8 @@ static void __init gef_sbc610_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
 	if (regs) {
@@ -198,6 +193,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -208,7 +204,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
 	.name			= "GE SBC610",
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 62cd3c555bfb..a817398a56da 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -91,6 +91,9 @@ static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "simple-bus", },
 	/* So that the DMA channel nodes can be probed individually: */
 	{ .compatible = "fsl,eloplus-dma", },
+	/* PCI controllers */
+	{ .compatible = "fsl,mpc8610-pci", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{}
 };
 
@@ -107,7 +110,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
@@ -278,25 +281,13 @@ mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
 static void __init mpc86xx_hpcd_setup_arch(void)
 {
 	struct resource r;
-	struct device_node *np;
 	unsigned char *pixis;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8610-pci")
-		    || of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0xa000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-        }
-#endif
+	fsl_pci_assign_primary();
+
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= mpc8610hpcd_get_pixel_format;
 	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 817245bc0219..e8bf3fae5606 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -19,7 +19,6 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -51,15 +50,8 @@ extern int uli_exclude_device(struct pci_controller *hose,
 static int mpc86xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	struct device_node* node;	
-	struct resource rsrc;
-
-	node = hose->dn;
-	of_address_to_resource(node, 0, &rsrc);
-
-	if ((rsrc.start & 0xfffff) == 0x8000) {
+	if (hose->dn == fsl_pci_primary)
 		return uli_exclude_device(hose, bus, devfn);
-	}
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -69,30 +61,11 @@ static int mpc86xx_exclude_device(struct pci_controller *hose,
 static void __init
 mpc86xx_hpcn_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		struct resource rsrc;
-		of_address_to_resource(np, 0, &rsrc);
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
-
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
@@ -101,13 +74,9 @@ mpc86xx_hpcn_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 }
 
 
@@ -162,6 +131,7 @@ static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "fsl,srio", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -171,7 +141,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcn, declare_of_platform_devices);
 machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier);
 
 define_machine(mpc86xx_hpcn) {
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index e7007d0d949e..b47a8fd0f3d3 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -38,23 +38,16 @@
 static void __init
 sbc8641_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8641_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
-		fsl_add_bridge(np, 0);
-#endif
-
 	printk("SBC8641 board from Wind River\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
+
+	fsl_pci_assign_primary();
 }
 
 
@@ -102,6 +95,7 @@ mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -111,7 +105,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(sbc8641, declare_of_platform_devices);
+machine_arch_initcall(sbc8641, declare_of_platform_devices);
 
 define_machine(sbc8641) {
 	.name			= "SBC8641D",
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 30fd01de6bed..72afd2888cad 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -1,6 +1,7 @@
 config PPC64
 	bool "64-bit kernel"
 	default n
+	select HAVE_VIRT_CPU_ACCOUNTING
 	help
 	  This option selects whether a 32-bit or a 64-bit kernel
 	  will be built.
@@ -337,21 +338,6 @@ config PPC_MM_SLICES
 	default y if (!PPC_FSL_BOOK3E && PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
 	default n
 
-config VIRT_CPU_ACCOUNTING
-	bool "Deterministic task and CPU time accounting"
-	depends on PPC64
-	default y
-	help
-	  Select this option to enable more accurate task and CPU time
-	  accounting.  This is done by reading a CPU counter on each
-	  kernel entry and exit and on transitions within the kernel
-	  between system, softirq and hardirq state, so there is a
-	  small performance impact.  This also enables accounting of
-	  stolen time on logically-partitioned systems running on
-	  IBM POWER5-based machines.
-
-	  If in doubt, say Y here.
-
 config PPC_HAVE_PMU_SUPPORT
        bool
 
diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c
index 852592b2b712..affcf566d460 100644
--- a/arch/powerpc/platforms/cell/beat.c
+++ b/arch/powerpc/platforms/cell/beat.c
@@ -136,9 +136,9 @@ ssize_t beat_nvram_get_size(void)
 	return BEAT_NVRAM_SIZE;
 }
 
-int beat_set_xdabr(unsigned long dabr)
+int beat_set_xdabr(unsigned long dabr, unsigned long dabrx)
 {
-	if (beat_set_dabr(dabr, DABRX_KERNEL | DABRX_USER))
+	if (beat_set_dabr(dabr, dabrx))
 		return -1;
 	return 0;
 }
diff --git a/arch/powerpc/platforms/cell/beat.h b/arch/powerpc/platforms/cell/beat.h
index 32c8efcedc80..bfcb8e351ae5 100644
--- a/arch/powerpc/platforms/cell/beat.h
+++ b/arch/powerpc/platforms/cell/beat.h
@@ -32,7 +32,7 @@ void beat_get_rtc_time(struct rtc_time *);
 ssize_t beat_nvram_get_size(void);
 ssize_t beat_nvram_read(char *, size_t, loff_t *);
 ssize_t beat_nvram_write(char *, size_t, loff_t *);
-int beat_set_xdabr(unsigned long);
+int beat_set_xdabr(unsigned long, unsigned long);
 void beat_power_save(void);
 void beat_kexec_cpu_down(int, int);
 
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 943c9d39aa16..0f6f83988b3d 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -88,7 +88,7 @@ static inline unsigned int beat_read_mask(unsigned hpte_group)
 }
 
 static long beat_lpar_hpte_insert(unsigned long hpte_group,
-				  unsigned long va, unsigned long pa,
+				  unsigned long vpn, unsigned long pa,
 				  unsigned long rflags, unsigned long vflags,
 				  int psize, int ssize)
 {
@@ -103,7 +103,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 			"rflags=%lx, vflags=%lx, psize=%d)\n",
 		hpte_group, va, pa, rflags, vflags, psize);
 
-	hpte_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) |
+	hpte_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M) |
 		vflags | HPTE_V_VALID;
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
@@ -184,14 +184,14 @@ static void beat_lpar_hptab_clear(void)
  */
 static long beat_lpar_hpte_updatepp(unsigned long slot,
 				    unsigned long newpp,
-				    unsigned long va,
+				    unsigned long vpn,
 				    int psize, int ssize, int local)
 {
 	unsigned long lpar_rc;
 	u64 dummy0, dummy1;
 	unsigned long want_v;
 
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
 
 	DBG_LOW("    update: "
 		"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
@@ -220,15 +220,15 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
 	return 0;
 }
 
-static long beat_lpar_hpte_find(unsigned long va, int psize)
+static long beat_lpar_hpte_find(unsigned long vpn, int psize)
 {
 	unsigned long hash;
 	unsigned long i, j;
 	long slot;
 	unsigned long want_v, hpte_v;
 
-	hash = hpt_hash(va, mmu_psize_defs[psize].shift, MMU_SEGSIZE_256M);
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
 
 	for (j = 0; j < 2; j++) {
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -255,14 +255,15 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
 					  unsigned long ea,
 					  int psize, int ssize)
 {
-	unsigned long lpar_rc, slot, vsid, va;
+	unsigned long vpn;
+	unsigned long lpar_rc, slot, vsid;
 	u64 dummy0, dummy1;
 
 	vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M);
-	va = (vsid << 28) | (ea & 0x0fffffff);
+	vpn = hpt_vpn(ea, vsid, MMU_SEGSIZE_256M);
 
 	raw_spin_lock(&beat_htab_lock);
-	slot = beat_lpar_hpte_find(va, psize);
+	slot = beat_lpar_hpte_find(vpn, psize);
 	BUG_ON(slot == -1);
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7,
@@ -272,7 +273,7 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
 	BUG_ON(lpar_rc != 0);
 }
 
-static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
+static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
 					 int psize, int ssize, int local)
 {
 	unsigned long want_v;
@@ -282,7 +283,7 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 
 	DBG_LOW("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
 		slot, va, psize, local);
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
 
 	raw_spin_lock_irqsave(&beat_htab_lock, flags);
 	dummy1 = beat_lpar_hpte_getword0(slot);
@@ -311,7 +312,7 @@ void __init hpte_init_beat(void)
 }
 
 static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
-				  unsigned long va, unsigned long pa,
+				  unsigned long vpn, unsigned long pa,
 				  unsigned long rflags, unsigned long vflags,
 				  int psize, int ssize)
 {
@@ -322,11 +323,11 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
 		return -1;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+		DBG_LOW("hpte_insert(group=%lx, vpn=%016lx, pa=%016lx, "
 			"rflags=%lx, vflags=%lx, psize=%d)\n",
-		hpte_group, va, pa, rflags, vflags, psize);
+		hpte_group, vpn, pa, rflags, vflags, psize);
 
-	hpte_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) |
+	hpte_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M) |
 		vflags | HPTE_V_VALID;
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
@@ -364,14 +365,14 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
  */
 static long beat_lpar_hpte_updatepp_v3(unsigned long slot,
 				    unsigned long newpp,
-				    unsigned long va,
+				    unsigned long vpn,
 				    int psize, int ssize, int local)
 {
 	unsigned long lpar_rc;
 	unsigned long want_v;
 	unsigned long pss;
 
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
 	pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc;
 
 	DBG_LOW("    update: "
@@ -392,16 +393,16 @@ static long beat_lpar_hpte_updatepp_v3(unsigned long slot,
 	return 0;
 }
 
-static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long va,
+static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long vpn,
 					 int psize, int ssize, int local)
 {
 	unsigned long want_v;
 	unsigned long lpar_rc;
 	unsigned long pss;
 
-	DBG_LOW("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
-		slot, va, psize, local);
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	DBG_LOW("    inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n",
+		slot, vpn, psize, local);
+	want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
 	pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc;
 
 	lpar_rc = beat_invalidate_htab_entry3(0, slot, want_v, pss);
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index 5822141aa63f..abc8af43ea7c 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -472,7 +472,7 @@ int __init celleb_setup_phb(struct pci_controller *phb)
 {
 	struct device_node *dev = phb->dn;
 	const struct of_device_id *match;
-	struct celleb_phb_spec *phb_spec;
+	const struct celleb_phb_spec *phb_spec;
 	int rc;
 
 	match = of_match_node(celleb_phb_match, dev);
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
index 23bc9db4317e..82607d621aca 100644
--- a/arch/powerpc/platforms/cell/cpufreq_spudemand.c
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -76,7 +76,7 @@ static void spu_gov_work(struct work_struct *work)
 static void spu_gov_init_work(struct spu_gov_info_struct *info)
 {
 	int delay = usecs_to_jiffies(info->poll_int);
-	INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work);
+	INIT_DEFERRABLE_WORK(&info->work, spu_gov_work);
 	schedule_delayed_work_on(info->policy->cpu, &info->work, delay);
 }
 
diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c
index 714bbfc3162c..db4e638cf408 100644
--- a/arch/powerpc/platforms/cell/spu_syscalls.c
+++ b/arch/powerpc/platforms/cell/spu_syscalls.c
@@ -69,8 +69,6 @@ SYSCALL_DEFINE4(spu_create, const char __user *, name, unsigned int, flags,
 	umode_t, mode, int, neighbor_fd)
 {
 	long ret;
-	struct file *neighbor;
-	int fput_needed;
 	struct spufs_calls *calls;
 
 	calls = spufs_calls_get();
@@ -78,11 +76,11 @@ SYSCALL_DEFINE4(spu_create, const char __user *, name, unsigned int, flags,
 		return -ENOSYS;
 
 	if (flags & SPU_CREATE_AFFINITY_SPU) {
+		struct fd neighbor = fdget(neighbor_fd);
 		ret = -EBADF;
-		neighbor = fget_light(neighbor_fd, &fput_needed);
-		if (neighbor) {
-			ret = calls->create_thread(name, flags, mode, neighbor);
-			fput_light(neighbor, fput_needed);
+		if (neighbor.file) {
+			ret = calls->create_thread(name, flags, mode, neighbor.file);
+			fdput(neighbor);
 		}
 	} else
 		ret = calls->create_thread(name, flags, mode, NULL);
@@ -94,8 +92,7 @@ SYSCALL_DEFINE4(spu_create, const char __user *, name, unsigned int, flags,
 asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus)
 {
 	long ret;
-	struct file *filp;
-	int fput_needed;
+	struct fd arg;
 	struct spufs_calls *calls;
 
 	calls = spufs_calls_get();
@@ -103,10 +100,10 @@ asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus)
 		return -ENOSYS;
 
 	ret = -EBADF;
-	filp = fget_light(fd, &fput_needed);
-	if (filp) {
-		ret = calls->spu_run(filp, unpc, ustatus);
-		fput_light(filp, fput_needed);
+	arg = fdget(fd);
+	if (arg.file) {
+		ret = calls->spu_run(arg.file, unpc, ustatus);
+		fdput(arg);
 	}
 
 	spufs_calls_put(calls);
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index c2c5b078ba80..657e3f233a64 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -106,6 +106,17 @@ static int spufs_ctx_note_size(struct spu_context *ctx, int dfd)
 	return total;
 }
 
+static int match_context(const void *v, struct file *file, unsigned fd)
+{
+	struct spu_context *ctx;
+	if (file->f_op != &spufs_context_fops)
+		return 0;
+	ctx = SPUFS_I(file->f_dentry->d_inode)->i_ctx;
+	if (ctx->flags & SPU_CREATE_NOSCHED)
+		return 0;
+	return fd + 1;
+}
+
 /*
  * The additional architecture-specific notes for Cell are various
  * context files in the spu context.
@@ -115,29 +126,18 @@ static int spufs_ctx_note_size(struct spu_context *ctx, int dfd)
  * internal functionality to dump them without needing to actually
  * open the files.
  */
+/*
+ * descriptor table is not shared, so files can't change or go away.
+ */
 static struct spu_context *coredump_next_context(int *fd)
 {
-	struct fdtable *fdt = files_fdtable(current->files);
 	struct file *file;
-	struct spu_context *ctx = NULL;
-
-	for (; *fd < fdt->max_fds; (*fd)++) {
-		if (!fd_is_open(*fd, fdt))
-			continue;
-
-		file = fcheck(*fd);
-
-		if (!file || file->f_op != &spufs_context_fops)
-			continue;
-
-		ctx = SPUFS_I(file->f_dentry->d_inode)->i_ctx;
-		if (ctx->flags & SPU_CREATE_NOSCHED)
-			continue;
-
-		break;
-	}
-
-	return ctx;
+	int n = iterate_fd(current->files, *fd, match_context, NULL);
+	if (!n)
+		return NULL;
+	*fd = n - 1;
+	file = fcheck(*fd);
+	return SPUFS_I(file->f_dentry->d_inode)->i_ctx;
 }
 
 int spufs_coredump_extra_notes_size(void)
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 14943ef01918..7d2d036754b5 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -19,12 +19,12 @@
 
 #undef DEBUG
 
+#include <linux/memblock.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <asm/iommu.h>
 #include <asm/machdep.h>
-#include <asm/abs_addr.h>
 #include <asm/firmware.h>
 
 #define IOBMAP_PAGE_SHIFT	12
@@ -99,7 +99,7 @@ static int iobmap_build(struct iommu_table *tbl, long index,
 	ip = ((u32 *)tbl->it_base) + index;
 
 	while (npages--) {
-		rpn = virt_to_abs(uaddr) >> IOBMAP_PAGE_SHIFT;
+		rpn = __pa(uaddr) >> IOBMAP_PAGE_SHIFT;
 
 		*(ip++) = IOBMAP_L2E_V | rpn;
 		/* invalidate tlb, can be optimized more */
@@ -258,7 +258,7 @@ void __init alloc_iobmap_l2(void)
 	return;
 #endif
 	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
-	iob_l2_base = (u32 *)abs_to_virt(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+	iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
 
 	printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
 }
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9cda6a1ad0cf..471aa3ccd9fd 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -30,19 +30,10 @@
 #include <asm/opal.h>
 #include <asm/iommu.h>
 #include <asm/tce.h>
-#include <asm/abs_addr.h>
 
 #include "powernv.h"
 #include "pci.h"
 
-struct resource_wrap {
-	struct list_head	link;
-	resource_size_t		size;
-	resource_size_t		align;
-	struct pci_dev		*dev;	/* Set if it's a device */
-	struct pci_bus		*bus;	/* Set if it's a bridge */
-};
-
 static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
 		       struct va_format *vaf)
 {
@@ -78,273 +69,6 @@ define_pe_printk_level(pe_err, KERN_ERR);
 define_pe_printk_level(pe_warn, KERN_WARNING);
 define_pe_printk_level(pe_info, KERN_INFO);
 
-
-/* Calculate resource usage & alignment requirement of a single
- * device. This will also assign all resources within the device
- * for a given type starting at 0 for the biggest one and then
- * assigning in decreasing order of size.
- */
-static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags,
-					resource_size_t *size,
-					resource_size_t *align)
-{
-	resource_size_t start;
-	struct resource *r;
-	int i;
-
-	pr_devel("  -> CDR %s\n", pci_name(dev));
-
-	*size = *align = 0;
-
-	/* Clear the resources out and mark them all unset */
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		r = &dev->resource[i];
-		if (!(r->flags & flags))
-		    continue;
-		if (r->start) {
-			r->end -= r->start;
-			r->start = 0;
-		}
-		r->flags |= IORESOURCE_UNSET;
-	}
-
-	/* We currently keep all memory resources together, we
-	 * will handle prefetch & 64-bit separately in the future
-	 * but for now we stick everybody in M32
-	 */
-	start = 0;
-	for (;;) {
-		resource_size_t max_size = 0;
-		int max_no = -1;
-
-		/* Find next biggest resource */
-		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-			r = &dev->resource[i];
-			if (!(r->flags & IORESOURCE_UNSET) ||
-			    !(r->flags & flags))
-				continue;
-			if (resource_size(r) > max_size) {
-				max_size = resource_size(r);
-				max_no = i;
-			}
-		}
-		if (max_no < 0)
-			break;
-		r = &dev->resource[max_no];
-		if (max_size > *align)
-			*align = max_size;
-		*size += max_size;
-		r->start = start;
-		start += max_size;
-		r->end = r->start + max_size - 1;
-		r->flags &= ~IORESOURCE_UNSET;
-		pr_devel("  ->     R%d %016llx..%016llx\n",
-			 max_no, r->start, r->end);
-	}
-	pr_devel("  <- CDR %s size=%llx align=%llx\n",
-		 pci_name(dev), *size, *align);
-}
-
-/* Allocate a resource "wrap" for a given device or bridge and
- * insert it at the right position in the sorted list
- */
-static void __devinit pnv_ioda_add_wrap(struct list_head *list,
-					struct pci_bus *bus,
-					struct pci_dev *dev,
-					resource_size_t size,
-					resource_size_t align)
-{
-	struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL);
-
-	w->size = size;
-	w->align = align;
-	w->dev = dev;
-	w->bus = bus;
-
-	list_for_each_entry(w1, list, link) {
-		if (w1->align < align) {
-			list_add_tail(&w->link, &w1->link);
-			return;
-		}
-	}
-	list_add_tail(&w->link, list);
-}
-
-/* Offset device resources of a given type */
-static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev,
-					  unsigned int flags,
-					  resource_size_t offset)
-{
-	struct resource *r;
-	int i;
-
-	pr_devel("  -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
-
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		r = &dev->resource[i];
-		if (r->flags & flags) {
-			dev->resource[i].start += offset;
-			dev->resource[i].end += offset;
-		}
-	}
-
-	pr_devel("  <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
-}
-
-/* Offset bus resources (& all children) of a given type */
-static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
-					  unsigned int flags,
-					  resource_size_t offset)
-{
-	struct resource *r;
-	struct pci_dev *dev;
-	struct pci_bus *cbus;
-	int i;
-
-	pr_devel("  -> OBR %s [%x] +%016llx\n",
-		 bus->self ? pci_name(bus->self) : "root", flags, offset);
-
-	pci_bus_for_each_resource(bus, r, i) {
-		if (r && (r->flags & flags)) {
-			r->start += offset;
-			r->end += offset;
-		}
-	}
-	list_for_each_entry(dev, &bus->devices, bus_list)
-		pnv_ioda_offset_dev(dev, flags, offset);
-	list_for_each_entry(cbus, &bus->children, node)
-		pnv_ioda_offset_bus(cbus, flags, offset);
-
-	pr_devel("  <- OBR %s [%x]\n",
-		 bus->self ? pci_name(bus->self) : "root", flags);
-}
-
-/* This is the guts of our IODA resource allocation. This is called
- * recursively for each bus in the system. It calculates all the
- * necessary size and requirements for children and assign them
- * resources such that:
- *
- *   - Each function fits in it's own contiguous set of IO/M32
- *     segment
- *
- *   - All segments behind a P2P bridge are contiguous and obey
- *     alignment constraints of those bridges
- */
-static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
-					resource_size_t *size,
-					resource_size_t *align)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	struct pnv_phb *phb = hose->private_data;
-	resource_size_t dev_size, dev_align, start;
-	resource_size_t min_align, min_balign;
-	struct pci_dev *cdev;
-	struct pci_bus *cbus;
-	struct list_head head;
-	struct resource_wrap *w;
-	unsigned int bres;
-
-	*size = *align = 0;
-
-	pr_devel("-> CBR %s [%x]\n",
-		 bus->self ? pci_name(bus->self) : "root", flags);
-
-	/* Calculate alignment requirements based on the type
-	 * of resource we are working on
-	 */
-	if (flags & IORESOURCE_IO) {
-		bres = 0;
-		min_align = phb->ioda.io_segsize;
-		min_balign = 0x1000;
-	} else {
-		bres = 1;
-		min_align = phb->ioda.m32_segsize;
-		min_balign = 0x100000;
-	}
-
-	/* Gather all our children resources ordered by alignment */
-	INIT_LIST_HEAD(&head);
-
-	/*   - Busses */
-	list_for_each_entry(cbus, &bus->children, node) {
-		pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align);
-		pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align);
-	}
-
-	/*   - Devices */
-	list_for_each_entry(cdev, &bus->devices, bus_list) {
-		pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align);
-		/* Align them to segment size */
-		if (dev_align < min_align)
-			dev_align = min_align;
-		pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align);
-	}
-	if (list_empty(&head))
-		goto empty;
-
-	/* Now we can do two things: assign offsets to them within that
-	 * level and get our total alignment & size requirements. The
-	 * assignment algorithm is going to be uber-trivial for now, we
-	 * can try to be smarter later at filling out holes.
-	 */
-	if (bus->self) {
-		/* No offset for downstream bridges */
-		start = 0;
-	} else {
-		/* Offset from the root */
-		if (flags & IORESOURCE_IO)
-			/* Don't hand out IO 0 */
-			start = hose->io_resource.start + 0x1000;
-		else
-			start = hose->mem_resources[0].start;
-	}
-	while(!list_empty(&head)) {
-		w = list_first_entry(&head, struct resource_wrap, link);
-		list_del(&w->link);
-		if (w->size) {
-			if (start) {
-				start = ALIGN(start, w->align);
-				if (w->dev)
-					pnv_ioda_offset_dev(w->dev,flags,start);
-				else if (w->bus)
-					pnv_ioda_offset_bus(w->bus,flags,start);
-			}
-			if (w->align > *align)
-				*align = w->align;
-		}
-		start += w->size;
-		kfree(w);
-	}
-	*size = start;
-
-	/* Align and setup bridge resources */
-	*align = max_t(resource_size_t, *align,
-		       max_t(resource_size_t, min_align, min_balign));
-	*size = ALIGN(*size,
-		      max_t(resource_size_t, min_align, min_balign));
- empty:
-	/* Only setup P2P's, not the PHB itself */
-	if (bus->self) {
-		struct resource *res = bus->resource[bres];
-
-		if (WARN_ON(res == NULL))
-			return;
-
-		/*
-		 * FIXME: We should probably export and call
-		 * pci_bridge_check_ranges() to properly re-initialize
-		 * the PCI portion of the flags here, and to detect
-		 * what the bridge actually supports.
-		 */
-		res->start = 0;
-		res->flags = (*size) ? flags : 0;
-		res->end = (*size) ? (*size - 1) : 0;
-	}
-
-	pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",
-		 bus->self ? pci_name(bus->self) : "root", flags,*size,*align);
-}
-
 static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
 {
 	struct device_node *np;
@@ -355,172 +79,6 @@ static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
 	return PCI_DN(np);
 }
 
-static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
-{
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	struct pnv_phb *phb = hose->private_data;
-	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
-	unsigned int pe, i;
-	resource_size_t pos;
-	struct resource io_res;
-	struct resource m32_res;
-	struct pci_bus_region region;
-	int rc;
-
-	/* Anything not referenced in the device-tree gets PE#0 */
-	pe = pdn ? pdn->pe_number : 0;
-
-	/* Calculate the device min/max */
-	io_res.start = m32_res.start = (resource_size_t)-1;
-	io_res.end = m32_res.end = 0;
-	io_res.flags = IORESOURCE_IO;
-	m32_res.flags = IORESOURCE_MEM;
-
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		struct resource *r = NULL;
-		if (dev->resource[i].flags & IORESOURCE_IO)
-			r = &io_res;
-		if (dev->resource[i].flags & IORESOURCE_MEM)
-			r = &m32_res;
-		if (!r)
-			continue;
-		if (dev->resource[i].start < r->start)
-			r->start = dev->resource[i].start;
-		if (dev->resource[i].end > r->end)
-			r->end = dev->resource[i].end;
-	}
-
-	/* Setup IO segments */
-	if (io_res.start < io_res.end) {
-		pcibios_resource_to_bus(dev, &region, &io_res);
-		pos = region.start;
-		i = pos / phb->ioda.io_segsize;
-		while(i < phb->ioda.total_pe && pos <= region.end) {
-			if (phb->ioda.io_segmap[i]) {
-				pr_err("%s: Trying to use IO seg #%d which is"
-				       " already used by PE# %d\n",
-				       pci_name(dev), i,
-				       phb->ioda.io_segmap[i]);
-				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
-				break;
-			}
-			phb->ioda.io_segmap[i] = pe;
-			rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
-							 OPAL_IO_WINDOW_TYPE,
-							 0, i);
-			if (rc != OPAL_SUCCESS) {
-				pr_err("%s: OPAL error %d setting up mapping"
-				       " for IO seg# %d\n",
-				       pci_name(dev), rc, i);
-				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
-				break;
-			}
-			pos += phb->ioda.io_segsize;
-			i++;
-		};
-	}
-
-	/* Setup M32 segments */
-	if (m32_res.start < m32_res.end) {
-		pcibios_resource_to_bus(dev, &region, &m32_res);
-		pos = region.start;
-		i = pos / phb->ioda.m32_segsize;
-		while(i < phb->ioda.total_pe && pos <= region.end) {
-			if (phb->ioda.m32_segmap[i]) {
-				pr_err("%s: Trying to use M32 seg #%d which is"
-				       " already used by PE# %d\n",
-				       pci_name(dev), i,
-				       phb->ioda.m32_segmap[i]);
-				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
-				break;
-			}
-			phb->ioda.m32_segmap[i] = pe;
-			rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
-							 OPAL_M32_WINDOW_TYPE,
-							 0, i);
-			if (rc != OPAL_SUCCESS) {
-				pr_err("%s: OPAL error %d setting up mapping"
-				       " for M32 seg# %d\n",
-				       pci_name(dev), rc, i);
-				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
-				break;
-			}
-			pos += phb->ioda.m32_segsize;
-			i++;
-		}
-	}
-}
-
-/* Check if a resource still fits in the total IO or M32 range
- * for a given PHB
- */
-static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose,
-					   struct resource *r)
-{
-	struct resource *bounds;
-
-	if (r->flags & IORESOURCE_IO)
-		bounds = &hose->io_resource;
-	else if (r->flags & IORESOURCE_MEM)
-		bounds = &hose->mem_resources[0];
-	else
-		return 1;
-
-	if (r->start >= bounds->start && r->end <= bounds->end)
-		return 1;
-	r->flags = 0;
-	return 0;
-}
-
-static void __devinit pnv_ioda_update_resources(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	struct pci_bus *cbus;
-	struct pci_dev *cdev;
-	unsigned int i;
-
-	/* We used to clear all device enables here. However it looks like
-	 * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers,
-	 * and shoot fatal errors to the PHB which in turns fences itself
-	 * and we can't recover from that ... yet. So for now, let's leave
-	 * the enables as-is and hope for the best.
-	 */
-
-	/* Check if bus resources fit in our IO or M32 range */
-	for (i = 0; bus->self && (i < 2); i++) {
-		struct resource *r = bus->resource[i];
-		if (r && !pnv_ioda_resource_fit(hose, r))
-			pr_err("%s: Bus %d resource %d disabled, no room\n",
-			       pci_name(bus->self), bus->number, i);
-	}
-
-	/* Update self if it's not a PHB */
-	if (bus->self)
-		pci_setup_bridge(bus);
-
-	/* Update child devices */
-	list_for_each_entry(cdev, &bus->devices, bus_list) {
-		/* Check if resource fits, if not, disabled it */
-		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-			struct resource *r = &cdev->resource[i];
-			if (!pnv_ioda_resource_fit(hose, r))
-				pr_err("%s: Resource %d disabled, no room\n",
-				       pci_name(cdev), i);
-		}
-
-		/* Assign segments */
-		pnv_ioda_setup_pe_segments(cdev);
-
-		/* Update HW BARs */
-		for (i = 0; i <= PCI_ROM_RESOURCE; i++)
-			pci_update_resource(cdev, i);
-	}
-
-	/* Update child busses */
-	list_for_each_entry(cbus, &bus->children, node)
-		pnv_ioda_update_resources(cbus);
-}
-
 static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb)
 {
 	unsigned long pe;
@@ -548,7 +106,7 @@ static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
  * but in the meantime, we need to protect them to avoid warnings
  */
 #ifdef CONFIG_PCI_MSI
-static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
+static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct pnv_phb *phb = hose->private_data;
@@ -560,19 +118,6 @@ static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
 		return NULL;
 	return &phb->ioda.pe_array[pdn->pe_number];
 }
-
-static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
-{
-	struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev);
-
-	while (!pe && dev->bus->self) {
-		dev = dev->bus->self;
-		pe = __pnv_ioda_get_one_pe(dev);
-		if (pe)
-			pe = pe->bus_pe;
-	}
-	return pe;
-}
 #endif /* CONFIG_PCI_MSI */
 
 static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
@@ -589,7 +134,11 @@ static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
 		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
 		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
 		parent = pe->pbus->self;
-		count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+		if (pe->flags & PNV_IODA_PE_BUS_ALL)
+			count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+		else
+			count = 1;
+
 		switch(count) {
 		case  1: bcomp = OpalPciBusAll;		break;
 		case  2: bcomp = OpalPciBus7Bits;	break;
@@ -666,13 +215,13 @@ static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
 {
 	struct pnv_ioda_pe *lpe;
 
-	list_for_each_entry(lpe, &phb->ioda.pe_list, link) {
+	list_for_each_entry(lpe, &phb->ioda.pe_dma_list, dma_link) {
 		if (lpe->dma_weight < pe->dma_weight) {
-			list_add_tail(&pe->link, &lpe->link);
+			list_add_tail(&pe->dma_link, &lpe->dma_link);
 			return;
 		}
 	}
-	list_add_tail(&pe->link, &phb->ioda.pe_list);
+	list_add_tail(&pe->dma_link, &phb->ioda.pe_dma_list);
 }
 
 static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
@@ -699,6 +248,7 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
 	return 10;
 }
 
+#if 0
 static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
@@ -767,6 +317,7 @@ static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 
 	return pe;
 }
+#endif /* Useful for SRIOV case */
 
 static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 {
@@ -784,34 +335,33 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 		pdn->pcidev = dev;
 		pdn->pe_number = pe->pe_number;
 		pe->dma_weight += pnv_ioda_dma_weight(dev);
-		if (dev->subordinate)
+		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
 			pnv_ioda_setup_same_PE(dev->subordinate, pe);
 	}
 }
 
-static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
-					    struct pnv_ioda_pe *ppe)
+/*
+ * There're 2 types of PCI bus sensitive PEs: One that is compromised of
+ * single PCI bus. Another one that contains the primary PCI bus and its
+ * subordinate PCI devices and buses. The second type of PE is normally
+ * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
+ */
+static void __devinit pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
 {
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct pnv_phb *phb = hose->private_data;
-	struct pci_bus *bus = dev->subordinate;
 	struct pnv_ioda_pe *pe;
 	int pe_num;
 
-	if (!bus) {
-		pr_warning("%s: Bridge without a subordinate bus !\n",
-			   pci_name(dev));
-		return;
-	}
 	pe_num = pnv_ioda_alloc_pe(phb);
 	if (pe_num == IODA_INVALID_PE) {
-		pr_warning("%s: Not enough PE# available, disabling bus\n",
-			   pci_name(dev));
+		pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n",
+			__func__, pci_domain_nr(bus), bus->number);
 		return;
 	}
 
 	pe = &phb->ioda.pe_array[pe_num];
-	ppe->bus_pe = pe;
+	pe->flags = (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
 	pe->pbus = bus;
 	pe->pdev = NULL;
 	pe->tce32_seg = -1;
@@ -819,8 +369,12 @@ static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
 	pe->rid = bus->busn_res.start << 8;
 	pe->dma_weight = 0;
 
-	pe_info(pe, "Secondary busses %pR associated with PE\n",
-		&bus->busn_res);
+	if (all)
+		pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
+			bus->busn_res.start, bus->busn_res.end, pe_num);
+	else
+		pe_info(pe, "Secondary bus %d associated with PE#%d\n",
+			bus->busn_res.start, pe_num);
 
 	if (pnv_ioda_configure_pe(phb, pe)) {
 		/* XXX What do we do here ? */
@@ -833,6 +387,9 @@ static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
 	/* Associate it with all child devices */
 	pnv_ioda_setup_same_PE(bus, pe);
 
+	/* Put PE to the list */
+	list_add_tail(&pe->list, &phb->ioda.pe_list);
+
 	/* Account for one DMA PE if at least one DMA capable device exist
 	 * below the bridge
 	 */
@@ -848,17 +405,33 @@ static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
 static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
-	struct pnv_ioda_pe *pe;
+
+	pnv_ioda_setup_bus_PE(bus, 0);
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
-		pe = pnv_ioda_setup_dev_PE(dev);
-		if (pe == NULL)
-			continue;
-		/* Leaving the PCIe domain ... single PE# */
-		if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
-			pnv_ioda_setup_bus_PE(dev, pe);
-		else if (dev->subordinate)
-			pnv_ioda_setup_PEs(dev->subordinate);
+		if (dev->subordinate) {
+			if (pci_pcie_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE)
+				pnv_ioda_setup_bus_PE(dev->subordinate, 1);
+			else
+				pnv_ioda_setup_PEs(dev->subordinate);
+		}
+	}
+}
+
+/*
+ * Configure PEs so that the downstream PCI buses and devices
+ * could have their associated PE#. Unfortunately, we didn't
+ * figure out the way to identify the PLX bridge yet. So we
+ * simply put the PCI bus and the subordinate behind the root
+ * port to PE# here. The game rule here is expected to be changed
+ * as soon as we can detected PLX bridge correctly.
+ */
+static void __devinit pnv_pci_ioda_setup_PEs(void)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		pnv_ioda_setup_PEs(hose->bus);
 	}
 }
 
@@ -1000,7 +573,7 @@ static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb)
 	remaining = phb->ioda.tce32_count;
 	tw = phb->ioda.dma_weight;
 	base = 0;
-	list_for_each_entry(pe, &phb->ioda.pe_list, link) {
+	list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
 		if (!pe->dma_weight)
 			continue;
 		if (!remaining) {
@@ -1109,34 +682,151 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
 static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
 #endif /* CONFIG_PCI_MSI */
 
-/* This is the starting point of our IODA specific resource
- * allocation process
+/*
+ * This function is supposed to be called on basis of PE from top
+ * to bottom style. So the the I/O or MMIO segment assigned to
+ * parent PE could be overrided by its child PEs if necessary.
  */
-static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
+static void __devinit pnv_ioda_setup_pe_seg(struct pci_controller *hose,
+				struct pnv_ioda_pe *pe)
 {
-	resource_size_t size, align;
-	struct pci_bus *child;
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_bus_region region;
+	struct resource *res;
+	int i, index;
+	int rc;
 
-	/* Associate PEs per functions */
-	pnv_ioda_setup_PEs(hose->bus);
+	/*
+	 * NOTE: We only care PCI bus based PE for now. For PCI
+	 * device based PE, for example SRIOV sensitive VF should
+	 * be figured out later.
+	 */
+	BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
+
+	pci_bus_for_each_resource(pe->pbus, res, i) {
+		if (!res || !res->flags ||
+		    res->start > res->end)
+			continue;
+
+		if (res->flags & IORESOURCE_IO) {
+			region.start = res->start - phb->ioda.io_pci_base;
+			region.end   = res->end - phb->ioda.io_pci_base;
+			index = region.start / phb->ioda.io_segsize;
+
+			while (index < phb->ioda.total_pe &&
+			       region.start <= region.end) {
+				phb->ioda.io_segmap[index] = pe->pe_number;
+				rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+					pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
+				if (rc != OPAL_SUCCESS) {
+					pr_err("%s: OPAL error %d when mapping IO "
+					       "segment #%d to PE#%d\n",
+					       __func__, rc, index, pe->pe_number);
+					break;
+				}
+
+				region.start += phb->ioda.io_segsize;
+				index++;
+			}
+		} else if (res->flags & IORESOURCE_MEM) {
+			region.start = res->start -
+				       hose->pci_mem_offset -
+				       phb->ioda.m32_pci_base;
+			region.end   = res->end -
+				       hose->pci_mem_offset -
+				       phb->ioda.m32_pci_base;
+			index = region.start / phb->ioda.m32_segsize;
+
+			while (index < phb->ioda.total_pe &&
+			       region.start <= region.end) {
+				phb->ioda.m32_segmap[index] = pe->pe_number;
+				rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+					pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
+				if (rc != OPAL_SUCCESS) {
+					pr_err("%s: OPAL error %d when mapping M32 "
+					       "segment#%d to PE#%d",
+					       __func__, rc, index, pe->pe_number);
+					break;
+				}
+
+				region.start += phb->ioda.m32_segsize;
+				index++;
+			}
+		}
+	}
+}
 
-	/* Calculate all resources */
-	pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align);
-	pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align);
+static void __devinit pnv_pci_ioda_setup_seg(void)
+{
+	struct pci_controller *tmp, *hose;
+	struct pnv_phb *phb;
+	struct pnv_ioda_pe *pe;
 
-	/* Apply then to HW */
-	pnv_ioda_update_resources(hose->bus);
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		phb = hose->private_data;
+		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+			pnv_ioda_setup_pe_seg(hose, pe);
+		}
+	}
+}
 
-	/* Setup DMA */
-	pnv_ioda_setup_dma(hose->private_data);
+static void __devinit pnv_pci_ioda_setup_DMA(void)
+{
+	struct pci_controller *hose, *tmp;
+	struct pnv_phb *phb;
 
-	/* Configure PCI Express settings */
-	list_for_each_entry(child, &hose->bus->children, node) {
-		struct pci_dev *self = child->self;
-		if (!self)
-			continue;
-		pcie_bus_configure_settings(child, self->pcie_mpss);
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		pnv_ioda_setup_dma(hose->private_data);
+
+		/* Mark the PHB initialization done */
+		phb = hose->private_data;
+		phb->initialized = 1;
+	}
+}
+
+static void __devinit pnv_pci_ioda_fixup(void)
+{
+	pnv_pci_ioda_setup_PEs();
+	pnv_pci_ioda_setup_seg();
+	pnv_pci_ioda_setup_DMA();
+}
+
+/*
+ * Returns the alignment for I/O or memory windows for P2P
+ * bridges. That actually depends on how PEs are segmented.
+ * For now, we return I/O or M32 segment size for PE sensitive
+ * P2P bridges. Otherwise, the default values (4KiB for I/O,
+ * 1MiB for memory) will be returned.
+ *
+ * The current PCI bus might be put into one PE, which was
+ * create against the parent PCI bridge. For that case, we
+ * needn't enlarge the alignment so that we can save some
+ * resources.
+ */
+static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
+						unsigned long type)
+{
+	struct pci_dev *bridge;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
+	int num_pci_bridges = 0;
+
+	bridge = bus->self;
+	while (bridge) {
+		if (pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE) {
+			num_pci_bridges++;
+			if (num_pci_bridges >= 2)
+				return 1;
+		}
+
+		bridge = bridge->bus->self;
 	}
+
+	/* We need support prefetchable memory window later */
+	if (type & IORESOURCE_MEM)
+		return phb->ioda.m32_segsize;
+
+	return phb->ioda.io_segsize;
 }
 
 /* Prevent enabling devices for which we couldn't properly
@@ -1144,10 +834,22 @@ static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
  */
 static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev)
 {
-	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn;
+
+	/* The function is probably called while the PEs have
+	 * not be created yet. For example, resource reassignment
+	 * during PCI probe period. We just skip the check if
+	 * PEs isn't ready.
+	 */
+	if (!phb->initialized)
+		return 0;
 
+	pdn = pnv_ioda_get_pdn(dev);
 	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
 		return -EINVAL;
+
 	return 0;
 }
 
@@ -1238,9 +940,9 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
 	/* Allocate aux data & arrays */
 	size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
 	m32map_off = size;
-	size += phb->ioda.total_pe;
+	size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
 	iomap_off = size;
-	size += phb->ioda.total_pe;
+	size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]);
 	pemap_off = size;
 	size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
 	aux = alloc_bootmem(size);
@@ -1251,6 +953,7 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
 	phb->ioda.pe_array = aux + pemap_off;
 	set_bit(0, phb->ioda.pe_alloc);
 
+	INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
 	INIT_LIST_HEAD(&phb->ioda.pe_list);
 
 	/* Calculate how many 32-bit TCE segments we have */
@@ -1299,14 +1002,17 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
 	/* Setup MSI support */
 	pnv_pci_init_ioda_msis(phb);
 
-	/* We set both PCI_PROBE_ONLY and PCI_REASSIGN_ALL_RSRC. This is an
-	 * odd combination which essentially means that we skip all resource
-	 * fixups and assignments in the generic code, and do it all
-	 * ourselves here
+	/*
+	 * We pass the PCI probe flag PCI_REASSIGN_ALL_RSRC here
+	 * to let the PCI core do resource assignment. It's supposed
+	 * that the PCI core will do correct I/O and MMIO alignment
+	 * for the P2P bridge bars so that each PCI bus (excluding
+	 * the child P2P bridges) can form individual PE.
 	 */
-	ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
+	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
-	pci_add_flags(PCI_PROBE_ONLY | PCI_REASSIGN_ALL_RSRC);
+	ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
+	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
 
 	/* Reset IODA tables to a clean state */
 	rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index 264967770c3a..6b4bef4e9d82 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -30,7 +30,6 @@
 #include <asm/opal.h>
 #include <asm/iommu.h>
 #include <asm/tce.h>
-#include <asm/abs_addr.h>
 
 #include "powernv.h"
 #include "pci.h"
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index be3cfc5ceabb..c01688a1a741 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -30,7 +30,6 @@
 #include <asm/opal.h>
 #include <asm/iommu.h>
 #include <asm/tce.h>
-#include <asm/abs_addr.h>
 #include <asm/firmware.h>
 
 #include "powernv.h"
@@ -447,6 +446,11 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 		pnv_tce_invalidate(tbl, tces, tcep - 1);
 }
 
+static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
+{
+	return ((u64 *)tbl->it_base)[index - tbl->it_offset];
+}
+
 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 			       void *tce_mem, u64 tce_size,
 			       u64 dma_offset)
@@ -597,6 +601,7 @@ void __init pnv_pci_init(void)
 	ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
 	ppc_md.tce_build = pnv_tce_build;
 	ppc_md.tce_free = pnv_tce_free;
+	ppc_md.tce_get = pnv_tce_get;
 	ppc_md.pci_probe_mode = pnv_pci_probe_mode;
 	set_pci_dma_ops(&dma_iommu_ops);
 
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8bc479634643..7cfb7c883deb 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -17,9 +17,14 @@ enum pnv_phb_model {
 };
 
 #define PNV_PCI_DIAG_BUF_SIZE	4096
+#define PNV_IODA_PE_DEV		(1 << 0)	/* PE has single PCI device	*/
+#define PNV_IODA_PE_BUS		(1 << 1)	/* PE has primary PCI bus	*/
+#define PNV_IODA_PE_BUS_ALL	(1 << 2)	/* PE has subordinate buses	*/
 
 /* Data associated with a PE, including IOMMU tracking etc.. */
 struct pnv_ioda_pe {
+	unsigned long		flags;
+
 	/* A PE can be associated with a single device or an
 	 * entire bus (& children). In the former case, pdev
 	 * is populated, in the later case, pbus is.
@@ -40,11 +45,6 @@ struct pnv_ioda_pe {
 	 */
 	unsigned int		dma_weight;
 
-	/* This is a PCI-E -> PCI-X bridge, this points to the
-	 * corresponding bus PE
-	 */
-	struct pnv_ioda_pe	*bus_pe;
-
 	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
 	int			tce32_seg;
 	int			tce32_segcount;
@@ -59,7 +59,8 @@ struct pnv_ioda_pe {
 	int			mve_number;
 
 	/* Link in list of PE#s */
-	struct list_head	link;
+	struct list_head	dma_link;
+	struct list_head	list;
 };
 
 struct pnv_phb {
@@ -68,6 +69,7 @@ struct pnv_phb {
 	enum pnv_phb_model	model;
 	u64			opal_id;
 	void __iomem		*regs;
+	int			initialized;
 	spinlock_t		lock;
 
 #ifdef CONFIG_PCI_MSI
@@ -107,6 +109,11 @@ struct pnv_phb {
 			unsigned int		*io_segmap;
 			struct pnv_ioda_pe	*pe_array;
 
+			/* Sorted list of used PE's based
+			 * on the sequence of creation
+			 */
+			struct list_head	pe_list;
+
 			/* Reverse map of PEs, will have to extend if
 			 * we are to support more than 256 PEs, indexed
 			 * bus { bus, devfn }
@@ -125,7 +132,7 @@ struct pnv_phb {
 			/* Sorted list of used PE's, sorted at
 			 * boot for resource allocation purposes
 			 */
-			struct list_head	pe_list;
+			struct list_head	pe_dma_list;
 		} ioda;
 	};
 
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 3ef46254c35b..7698b6e13c57 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void)
 {
 	unsigned int cpu;
 
-	/* If powersave_nap is enabled, use NAP mode, else just
-	 * spin aimlessly
-	 */
-	if (!powersave_nap) {
-		generic_mach_cpu_die();
-		return;
-	}
-
 	/* Standard hot unplug procedure */
 	local_irq_disable();
 	idle_task_exit();
@@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void)
 	 */
 	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
 	while (!generic_check_cpu_restart(cpu)) {
-		power7_idle();
+		power7_nap();
 		if (!generic_check_cpu_restart(cpu)) {
 			DBG("CPU%d Unexpected exit while offline !\n", cpu);
 			/* We may be getting an IPI, so we re-enable
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 3124cf791ebb..d00d7b0a3bda 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -43,7 +43,7 @@ enum ps3_lpar_vas_id {
 
 static DEFINE_SPINLOCK(ps3_htab_lock);
 
-static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
+static long ps3_hpte_insert(unsigned long hpte_group, unsigned long vpn,
 	unsigned long pa, unsigned long rflags, unsigned long vflags,
 	int psize, int ssize)
 {
@@ -61,7 +61,7 @@ static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
 	 */
 	vflags &= ~HPTE_V_SECONDARY;
 
-	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_v = hpte_encode_v(vpn, psize, ssize) | vflags | HPTE_V_VALID;
 	hpte_r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
 
 	spin_lock_irqsave(&ps3_htab_lock, flags);
@@ -75,8 +75,8 @@ static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
 
 	if (result) {
 		/* all entries bolted !*/
-		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%llx r=%llx\n",
-			__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
+		pr_info("%s:result=%d vpn=%lx pa=%lx ix=%lx v=%llx r=%llx\n",
+			__func__, result, vpn, pa, hpte_group, hpte_v, hpte_r);
 		BUG();
 	}
 
@@ -107,7 +107,7 @@ static long ps3_hpte_remove(unsigned long hpte_group)
 }
 
 static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
-	unsigned long va, int psize, int ssize, int local)
+	unsigned long vpn, int psize, int ssize, int local)
 {
 	int result;
 	u64 hpte_v, want_v, hpte_rs;
@@ -115,7 +115,7 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	unsigned long flags;
 	long ret;
 
-	want_v = hpte_encode_v(va, psize, ssize);
+	want_v = hpte_encode_v(vpn, psize, ssize);
 
 	spin_lock_irqsave(&ps3_htab_lock, flags);
 
@@ -125,8 +125,8 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
 				       &hpte_rs);
 
 	if (result) {
-		pr_info("%s: res=%d read va=%lx slot=%lx psize=%d\n",
-			__func__, result, va, slot, psize);
+		pr_info("%s: res=%d read vpn=%lx slot=%lx psize=%d\n",
+			__func__, result, vpn, slot, psize);
 		BUG();
 	}
 
@@ -159,7 +159,7 @@ static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
 	panic("ps3_hpte_updateboltedpp() not implemented");
 }
 
-static void ps3_hpte_invalidate(unsigned long slot, unsigned long va,
+static void ps3_hpte_invalidate(unsigned long slot, unsigned long vpn,
 	int psize, int ssize, int local)
 {
 	unsigned long flags;
@@ -170,8 +170,8 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va,
 	result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0);
 
 	if (result) {
-		pr_info("%s: res=%d va=%lx slot=%lx psize=%d\n",
-			__func__, result, va, slot, psize);
+		pr_info("%s: res=%d vpn=%lx slot=%lx psize=%d\n",
+			__func__, result, vpn, slot, psize);
 		BUG();
 	}
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 2d664c5a83b0..3f509f86432c 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -184,11 +184,15 @@ early_param("ps3flash", early_parse_ps3flash);
 #define prealloc_ps3flash_bounce_buffer()	do { } while (0)
 #endif
 
-static int ps3_set_dabr(unsigned long dabr)
+static int ps3_set_dabr(unsigned long dabr, unsigned long dabrx)
 {
-	enum {DABR_USER = 1, DABR_KERNEL = 2,};
+	/* Have to set at least one bit in the DABRX */
+	if (dabrx == 0 && dabr == 0)
+		dabrx = DABRX_USER;
+	/* hypervisor only allows us to set BTI, Kernel and user */
+	dabrx &= DABRX_BTI | DABRX_KERNEL | DABRX_USER;
 
-	return lv1_set_dabr(dabr, DABR_KERNEL | DABR_USER) ? -1 : 0;
+	return lv1_set_dabr(dabr, dabrx) ? -1 : 0;
 }
 
 static void __init ps3_setup_arch(void)
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index c222189f5bb2..890622b87c8f 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -6,8 +6,9 @@ obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   firmware.o power.o dlpar.o mobility.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
-obj-$(CONFIG_EEH)	+= eeh.o eeh_dev.o eeh_cache.o eeh_driver.o \
-			   eeh_event.o eeh_sysfs.o eeh_pseries.o
+obj-$(CONFIG_EEH)	+= eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
+			   eeh_driver.o eeh_event.o eeh_sysfs.o \
+			   eeh_pseries.o
 obj-$(CONFIG_KEXEC)	+= kexec.o
 obj-$(CONFIG_PCI)	+= pci.o pci_dlpar.o
 obj-$(CONFIG_PSERIES_MSI)	+= msi.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index ecd394cf34e6..9a04322b1736 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -92,6 +92,20 @@ struct eeh_ops *eeh_ops = NULL;
 int eeh_subsystem_enabled;
 EXPORT_SYMBOL(eeh_subsystem_enabled);
 
+/*
+ * EEH probe mode support. The intention is to support multiple
+ * platforms for EEH. Some platforms like pSeries do PCI emunation
+ * based on device tree. However, other platforms like powernv probe
+ * PCI devices from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for particular
+ * OF node or PCI device so that the corresponding PE would be created
+ * there.
+ */
+int eeh_probe_mode;
+
+/* Global EEH mutex */
+DEFINE_MUTEX(eeh_mutex);
+
 /* Lock to avoid races due to multiple reports of an error */
 static DEFINE_RAW_SPINLOCK(confirm_error_lock);
 
@@ -204,22 +218,12 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
 		}
 	}
 
-	/* Gather status on devices under the bridge */
-	if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
-		struct device_node *child;
-
-		for_each_child_of_node(dn, child) {
-			if (of_node_to_eeh_dev(child))
-				n += eeh_gather_pci_data(of_node_to_eeh_dev(child), buf+n, len-n);
-		}
-	}
-
 	return n;
 }
 
 /**
  * eeh_slot_error_detail - Generate combined log including driver log and error log
- * @edev: device to report error log for
+ * @pe: EEH PE
  * @severity: temporary or permanent error log
  *
  * This routine should be called to generate the combined log, which
@@ -227,17 +231,22 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
  * out from the config space of the corresponding PCI device, while
  * the error log is fetched through platform dependent function call.
  */
-void eeh_slot_error_detail(struct eeh_dev *edev, int severity)
+void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 {
 	size_t loglen = 0;
-	pci_regs_buf[0] = 0;
+	struct eeh_dev *edev;
 
-	eeh_pci_enable(edev, EEH_OPT_THAW_MMIO);
-	eeh_ops->configure_bridge(eeh_dev_to_of_node(edev));
-	eeh_restore_bars(edev);
-	loglen = eeh_gather_pci_data(edev, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
+	eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+	eeh_ops->configure_bridge(pe);
+	eeh_pe_restore_bars(pe);
 
-	eeh_ops->get_log(eeh_dev_to_of_node(edev), severity, pci_regs_buf, loglen);
+	pci_regs_buf[0] = 0;
+	eeh_pe_for_each_dev(pe, edev) {
+		loglen += eeh_gather_pci_data(edev, pci_regs_buf,
+				EEH_PCI_REGS_LOG_LEN);
+        }
+
+	eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
 }
 
 /**
@@ -261,126 +270,8 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
 }
 
 /**
- * eeh_find_device_pe - Retrieve the PE for the given device
- * @dn: device node
- *
- * Return the PE under which this device lies
- */
-struct device_node *eeh_find_device_pe(struct device_node *dn)
-{
-	while (dn->parent && of_node_to_eeh_dev(dn->parent) &&
-	       (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) {
-		dn = dn->parent;
-	}
-	return dn;
-}
-
-/**
- * __eeh_mark_slot - Mark all child devices as failed
- * @parent: parent device
- * @mode_flag: failure flag
- *
- * Mark all devices that are children of this device as failed.
- * Mark the device driver too, so that it can see the failure
- * immediately; this is critical, since some drivers poll
- * status registers in interrupts ... If a driver is polling,
- * and the slot is frozen, then the driver can deadlock in
- * an interrupt context, which is bad.
- */
-static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
-{
-	struct device_node *dn;
-
-	for_each_child_of_node(parent, dn) {
-		if (of_node_to_eeh_dev(dn)) {
-			/* Mark the pci device driver too */
-			struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev;
-
-			of_node_to_eeh_dev(dn)->mode |= mode_flag;
-
-			if (dev && dev->driver)
-				dev->error_state = pci_channel_io_frozen;
-
-			__eeh_mark_slot(dn, mode_flag);
-		}
-	}
-}
-
-/**
- * eeh_mark_slot - Mark the indicated device and its children as failed
- * @dn: parent device
- * @mode_flag: failure flag
- *
- * Mark the indicated device and its child devices as failed.
- * The device drivers are marked as failed as well.
- */
-void eeh_mark_slot(struct device_node *dn, int mode_flag)
-{
-	struct pci_dev *dev;
-	dn = eeh_find_device_pe(dn);
-
-	/* Back up one, since config addrs might be shared */
-	if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
-		dn = dn->parent;
-
-	of_node_to_eeh_dev(dn)->mode |= mode_flag;
-
-	/* Mark the pci device too */
-	dev = of_node_to_eeh_dev(dn)->pdev;
-	if (dev)
-		dev->error_state = pci_channel_io_frozen;
-
-	__eeh_mark_slot(dn, mode_flag);
-}
-
-/**
- * __eeh_clear_slot - Clear failure flag for the child devices
- * @parent: parent device
- * @mode_flag: flag to be cleared
- *
- * Clear failure flag for the child devices.
- */
-static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
-{
-	struct device_node *dn;
-
-	for_each_child_of_node(parent, dn) {
-		if (of_node_to_eeh_dev(dn)) {
-			of_node_to_eeh_dev(dn)->mode &= ~mode_flag;
-			of_node_to_eeh_dev(dn)->check_count = 0;
-			__eeh_clear_slot(dn, mode_flag);
-		}
-	}
-}
-
-/**
- * eeh_clear_slot - Clear failure flag for the indicated device and its children
- * @dn: parent device
- * @mode_flag: flag to be cleared
- *
- * Clear failure flag for the indicated device and its children.
- */
-void eeh_clear_slot(struct device_node *dn, int mode_flag)
-{
-	unsigned long flags;
-	raw_spin_lock_irqsave(&confirm_error_lock, flags);
-	
-	dn = eeh_find_device_pe(dn);
-	
-	/* Back up one, since config addrs might be shared */
-	if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
-		dn = dn->parent;
-
-	of_node_to_eeh_dev(dn)->mode &= ~mode_flag;
-	of_node_to_eeh_dev(dn)->check_count = 0;
-	__eeh_clear_slot(dn, mode_flag);
-	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
-}
-
-/**
- * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze
- * @dn: device node
- * @dev: pci device, if known
+ * eeh_dev_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @edev: eeh device
  *
  * Check for an EEH failure for the given device node.  Call this
  * routine if the result of a read was all 0xff's and you want to
@@ -392,11 +283,13 @@ void eeh_clear_slot(struct device_node *dn, int mode_flag)
  *
  * It is safe to call this routine in an interrupt context.
  */
-int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
+int eeh_dev_check_failure(struct eeh_dev *edev)
 {
 	int ret;
 	unsigned long flags;
-	struct eeh_dev *edev;
+	struct device_node *dn;
+	struct pci_dev *dev;
+	struct eeh_pe *pe;
 	int rc = 0;
 	const char *location;
 
@@ -405,23 +298,23 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	if (!eeh_subsystem_enabled)
 		return 0;
 
-	if (!dn) {
+	if (!edev) {
 		eeh_stats.no_dn++;
 		return 0;
 	}
-	dn = eeh_find_device_pe(dn);
-	edev = of_node_to_eeh_dev(dn);
+	dn = eeh_dev_to_of_node(edev);
+	dev = eeh_dev_to_pci_dev(edev);
+	pe = edev->pe;
 
 	/* Access to IO BARs might get this far and still not want checking. */
-	if (!(edev->mode & EEH_MODE_SUPPORTED) ||
-	    edev->mode & EEH_MODE_NOCHECK) {
+	if (!pe) {
 		eeh_stats.ignored_check++;
-		pr_debug("EEH: Ignored check (%x) for %s %s\n",
-			edev->mode, eeh_pci_name(dev), dn->full_name);
+		pr_debug("EEH: Ignored check for %s %s\n",
+			eeh_pci_name(dev), dn->full_name);
 		return 0;
 	}
 
-	if (!edev->config_addr && !edev->pe_config_addr) {
+	if (!pe->addr && !pe->config_addr) {
 		eeh_stats.no_cfg_addr++;
 		return 0;
 	}
@@ -434,13 +327,13 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 */
 	raw_spin_lock_irqsave(&confirm_error_lock, flags);
 	rc = 1;
-	if (edev->mode & EEH_MODE_ISOLATED) {
-		edev->check_count++;
-		if (edev->check_count % EEH_MAX_FAILS == 0) {
+	if (pe->state & EEH_PE_ISOLATED) {
+		pe->check_count++;
+		if (pe->check_count % EEH_MAX_FAILS == 0) {
 			location = of_get_property(dn, "ibm,loc-code", NULL);
 			printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
 				"location=%s driver=%s pci addr=%s\n",
-				edev->check_count, location,
+				pe->check_count, location,
 				eeh_driver_name(dev), eeh_pci_name(dev));
 			printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
 				eeh_driver_name(dev));
@@ -456,7 +349,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * function zero of a multi-function device.
 	 * In any case they must share a common PHB.
 	 */
-	ret = eeh_ops->get_state(dn, NULL);
+	ret = eeh_ops->get_state(pe, NULL);
 
 	/* Note that config-io to empty slots may fail;
 	 * they are empty when they don't have children.
@@ -469,7 +362,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	    (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
 	    (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
 		eeh_stats.false_positives++;
-		edev->false_positives ++;
+		pe->false_positives++;
 		rc = 0;
 		goto dn_unlock;
 	}
@@ -480,10 +373,10 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * with other functions on this device, and functions under
 	 * bridges.
 	 */
-	eeh_mark_slot(dn, EEH_MODE_ISOLATED);
+	eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 
-	eeh_send_failure_event(edev);
+	eeh_send_failure_event(pe);
 
 	/* Most EEH events are due to device driver bugs.  Having
 	 * a stack trace will help the device-driver authors figure
@@ -497,7 +390,7 @@ dn_unlock:
 	return rc;
 }
 
-EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
+EXPORT_SYMBOL_GPL(eeh_dev_check_failure);
 
 /**
  * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
@@ -514,21 +407,19 @@ EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
 unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
 {
 	unsigned long addr;
-	struct pci_dev *dev;
-	struct device_node *dn;
+	struct eeh_dev *edev;
 
 	/* Finding the phys addr + pci device; this is pretty quick. */
 	addr = eeh_token_to_phys((unsigned long __force) token);
-	dev = pci_addr_cache_get_device(addr);
-	if (!dev) {
+	edev = eeh_addr_cache_get_dev(addr);
+	if (!edev) {
 		eeh_stats.no_device++;
 		return val;
 	}
 
-	dn = pci_device_to_OF_node(dev);
-	eeh_dn_check_failure(dn, dev);
+	eeh_dev_check_failure(edev);
 
-	pci_dev_put(dev);
+	pci_dev_put(eeh_dev_to_pci_dev(edev));
 	return val;
 }
 
@@ -537,23 +428,22 @@ EXPORT_SYMBOL(eeh_check_failure);
 
 /**
  * eeh_pci_enable - Enable MMIO or DMA transfers for this slot
- * @edev: pci device node
+ * @pe: EEH PE
  *
  * This routine should be called to reenable frozen MMIO or DMA
  * so that it would work correctly again. It's useful while doing
  * recovery or log collection on the indicated device.
  */
-int eeh_pci_enable(struct eeh_dev *edev, int function)
+int eeh_pci_enable(struct eeh_pe *pe, int function)
 {
 	int rc;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
 
-	rc = eeh_ops->set_option(dn, function);
+	rc = eeh_ops->set_option(pe, function);
 	if (rc)
-		printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
-		        function, rc, dn->full_name);
+		pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
+			__func__, function, pe->phb->global_number, pe->addr, rc);
 
-	rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
+	rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
 	if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
 	   (function == EEH_OPT_THAW_MMIO))
 		return 0;
@@ -571,17 +461,24 @@ int eeh_pci_enable(struct eeh_dev *edev, int function)
  */
 int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
 {
-	struct device_node *dn = pci_device_to_OF_node(dev);
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+	struct eeh_pe *pe = edev->pe;
+
+	if (!pe) {
+		pr_err("%s: No PE found on PCI device %s\n",
+			__func__, pci_name(dev));
+		return -EINVAL;
+	}
 
 	switch (state) {
 	case pcie_deassert_reset:
-		eeh_ops->reset(dn, EEH_RESET_DEACTIVATE);
+		eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
 		break;
 	case pcie_hot_reset:
-		eeh_ops->reset(dn, EEH_RESET_HOT);
+		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
-		eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL);
+		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
 	default:
 		return -EINVAL;
@@ -591,66 +488,37 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 }
 
 /**
- * __eeh_set_pe_freset - Check the required reset for child devices
- * @parent: parent device
- * @freset: return value
- *
- * Each device might have its preferred reset type: fundamental or
- * hot reset. The routine is used to collect the information from
- * the child devices so that they could be reset accordingly.
- */
-void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
-{
-	struct device_node *dn;
-
-	for_each_child_of_node(parent, dn) {
-		if (of_node_to_eeh_dev(dn)) {
-			struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev;
-
-			if (dev && dev->driver)
-				*freset |= dev->needs_freset;
-
-			__eeh_set_pe_freset(dn, freset);
-		}
-	}
-}
-
-/**
- * eeh_set_pe_freset - Check the required reset for the indicated device and its children
- * @dn: parent device
- * @freset: return value
+ * eeh_set_pe_freset - Check the required reset for the indicated device
+ * @data: EEH device
+ * @flag: return value
  *
  * Each device might have its preferred reset type: fundamental or
  * hot reset. The routine is used to collected the information for
  * the indicated device and its children so that the bunch of the
  * devices could be reset properly.
  */
-void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
+static void *eeh_set_dev_freset(void *data, void *flag)
 {
 	struct pci_dev *dev;
-	dn = eeh_find_device_pe(dn);
-
-	/* Back up one, since config addrs might be shared */
-	if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
-		dn = dn->parent;
+	unsigned int *freset = (unsigned int *)flag;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
 
-	dev = of_node_to_eeh_dev(dn)->pdev;
+	dev = eeh_dev_to_pci_dev(edev);
 	if (dev)
 		*freset |= dev->needs_freset;
 
-	__eeh_set_pe_freset(dn, freset);
+	return NULL;
 }
 
 /**
  * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
- * @edev: pci device node to be reset.
+ * @pe: EEH PE
  *
  * Assert the PCI #RST line for 1/4 second.
  */
-static void eeh_reset_pe_once(struct eeh_dev *edev)
+static void eeh_reset_pe_once(struct eeh_pe *pe)
 {
 	unsigned int freset = 0;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
 
 	/* Determine type of EEH reset required for
 	 * Partitionable Endpoint, a hot-reset (1)
@@ -658,12 +526,12 @@ static void eeh_reset_pe_once(struct eeh_dev *edev)
 	 * A fundamental reset required by any device under
 	 * Partitionable Endpoint trumps hot-reset.
   	 */
-	eeh_set_pe_freset(dn, &freset);
+	eeh_pe_dev_traverse(pe, eeh_set_dev_freset, &freset);
 
 	if (freset)
-		eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL);
+		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 	else
-		eeh_ops->reset(dn, EEH_RESET_HOT);
+		eeh_ops->reset(pe, EEH_RESET_HOT);
 
 	/* The PCI bus requires that the reset be held high for at least
 	 * a 100 milliseconds. We wait a bit longer 'just in case'.
@@ -675,9 +543,9 @@ static void eeh_reset_pe_once(struct eeh_dev *edev)
 	 * pci slot reset line is dropped. Make sure we don't miss
 	 * these, and clear the flag now.
 	 */
-	eeh_clear_slot(dn, EEH_MODE_ISOLATED);
+	eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 
-	eeh_ops->reset(dn, EEH_RESET_DEACTIVATE);
+	eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
 
 	/* After a PCI slot has been reset, the PCI Express spec requires
 	 * a 1.5 second idle time for the bus to stabilize, before starting
@@ -689,116 +557,36 @@ static void eeh_reset_pe_once(struct eeh_dev *edev)
 
 /**
  * eeh_reset_pe - Reset the indicated PE
- * @edev: PCI device associated EEH device
+ * @pe: EEH PE
  *
  * This routine should be called to reset indicated device, including
  * PE. A PE might include multiple PCI devices and sometimes PCI bridges
  * might be involved as well.
  */
-int eeh_reset_pe(struct eeh_dev *edev)
+int eeh_reset_pe(struct eeh_pe *pe)
 {
 	int i, rc;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
 
 	/* Take three shots at resetting the bus */
 	for (i=0; i<3; i++) {
-		eeh_reset_pe_once(edev);
+		eeh_reset_pe_once(pe);
 
-		rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC);
+		rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
 		if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
 			return 0;
 
 		if (rc < 0) {
-			printk(KERN_ERR "EEH: unrecoverable slot failure %s\n",
-			       dn->full_name);
+			pr_err("%s: Unrecoverable slot failure on PHB#%d-PE#%x",
+				__func__, pe->phb->global_number, pe->addr);
 			return -1;
 		}
-		printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n",
-		       i+1, dn->full_name, rc);
+		pr_err("EEH: bus reset %d failed on PHB#%d-PE#%x, rc=%d\n",
+			i+1, pe->phb->global_number, pe->addr, rc);
 	}
 
 	return -1;
 }
 
-/** Save and restore of PCI BARs
- *
- * Although firmware will set up BARs during boot, it doesn't
- * set up device BAR's after a device reset, although it will,
- * if requested, set up bridge configuration. Thus, we need to
- * configure the PCI devices ourselves.  
- */
-
-/**
- * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
- * @edev: PCI device associated EEH device
- *
- * Loads the PCI configuration space base address registers,
- * the expansion ROM base address, the latency timer, and etc.
- * from the saved values in the device node.
- */
-static inline void eeh_restore_one_device_bars(struct eeh_dev *edev)
-{
-	int i;
-	u32 cmd;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
-
-	if (!edev->phb)
-		return;
-
-	for (i=4; i<10; i++) {
-		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
-	}
-
-	/* 12 == Expansion ROM Address */
-	eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
-
-#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
-#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
-
-	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
-	            SAVED_BYTE(PCI_CACHE_LINE_SIZE));
-
-	eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
-	            SAVED_BYTE(PCI_LATENCY_TIMER));
-
-	/* max latency, min grant, interrupt pin and line */
-	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
-
-	/* Restore PERR & SERR bits, some devices require it,
-	 * don't touch the other command bits
-	 */
-	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
-	if (edev->config_space[1] & PCI_COMMAND_PARITY)
-		cmd |= PCI_COMMAND_PARITY;
-	else
-		cmd &= ~PCI_COMMAND_PARITY;
-	if (edev->config_space[1] & PCI_COMMAND_SERR)
-		cmd |= PCI_COMMAND_SERR;
-	else
-		cmd &= ~PCI_COMMAND_SERR;
-	eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
-}
-
-/**
- * eeh_restore_bars - Restore the PCI config space info
- * @edev: EEH device
- *
- * This routine performs a recursive walk to the children
- * of this device as well.
- */
-void eeh_restore_bars(struct eeh_dev *edev)
-{
-	struct device_node *dn;
-	if (!edev)
-		return;
-	
-	if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code))
-		eeh_restore_one_device_bars(edev);
-
-	for_each_child_of_node(eeh_dev_to_of_node(edev), dn)
-		eeh_restore_bars(of_node_to_eeh_dev(dn));
-}
-
 /**
  * eeh_save_bars - Save device bars
  * @edev: PCI device associated EEH device
@@ -808,7 +596,7 @@ void eeh_restore_bars(struct eeh_dev *edev)
  * PCI devices are added individually; but, for the restore,
  * an entire slot is reset at a time.
  */
-static void eeh_save_bars(struct eeh_dev *edev)
+void eeh_save_bars(struct eeh_dev *edev)
 {
 	int i;
 	struct device_node *dn;
@@ -822,102 +610,6 @@ static void eeh_save_bars(struct eeh_dev *edev)
 }
 
 /**
- * eeh_early_enable - Early enable EEH on the indicated device
- * @dn: device node
- * @data: BUID
- *
- * Enable EEH functionality on the specified PCI device. The function
- * is expected to be called before real PCI probing is done. However,
- * the PHBs have been initialized at this point.
- */
-static void *eeh_early_enable(struct device_node *dn, void *data)
-{
-	int ret;
-	const u32 *class_code = of_get_property(dn, "class-code", NULL);
-	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
-	const u32 *device_id = of_get_property(dn, "device-id", NULL);
-	const u32 *regs;
-	int enable;
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
-
-	edev->class_code = 0;
-	edev->mode = 0;
-	edev->check_count = 0;
-	edev->freeze_count = 0;
-	edev->false_positives = 0;
-
-	if (!of_device_is_available(dn))
-		return NULL;
-
-	/* Ignore bad nodes. */
-	if (!class_code || !vendor_id || !device_id)
-		return NULL;
-
-	/* There is nothing to check on PCI to ISA bridges */
-	if (dn->type && !strcmp(dn->type, "isa")) {
-		edev->mode |= EEH_MODE_NOCHECK;
-		return NULL;
-	}
-	edev->class_code = *class_code;
-
-	/* Ok... see if this device supports EEH.  Some do, some don't,
-	 * and the only way to find out is to check each and every one.
-	 */
-	regs = of_get_property(dn, "reg", NULL);
-	if (regs) {
-		/* First register entry is addr (00BBSS00)  */
-		/* Try to enable eeh */
-		ret = eeh_ops->set_option(dn, EEH_OPT_ENABLE);
-
-		enable = 0;
-		if (ret == 0) {
-			edev->config_addr = regs[0];
-
-			/* If the newer, better, ibm,get-config-addr-info is supported, 
-			 * then use that instead.
-			 */
-			edev->pe_config_addr = eeh_ops->get_pe_addr(dn);
-
-			/* Some older systems (Power4) allow the
-			 * ibm,set-eeh-option call to succeed even on nodes
-			 * where EEH is not supported. Verify support
-			 * explicitly.
-			 */
-			ret = eeh_ops->get_state(dn, NULL);
-			if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
-				enable = 1;
-		}
-
-		if (enable) {
-			eeh_subsystem_enabled = 1;
-			edev->mode |= EEH_MODE_SUPPORTED;
-
-			pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n",
-				 dn->full_name, edev->config_addr,
-				 edev->pe_config_addr);
-		} else {
-
-			/* This device doesn't support EEH, but it may have an
-			 * EEH parent, in which case we mark it as supported.
-			 */
-			if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
-			    (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) {
-				/* Parent supports EEH. */
-				edev->mode |= EEH_MODE_SUPPORTED;
-				edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
-				return NULL;
-			}
-		}
-	} else {
-		printk(KERN_WARNING "EEH: %s: unable to get reg property.\n",
-		       dn->full_name);
-	}
-
-	eeh_save_bars(edev);
-	return NULL;
-}
-
-/**
  * eeh_ops_register - Register platform dependent EEH operations
  * @ops: platform dependent EEH operations
  *
@@ -982,7 +674,7 @@ int __exit eeh_ops_unregister(const char *name)
  * Even if force-off is set, the EEH hardware is still enabled, so that
  * newer systems can boot.
  */
-void __init eeh_init(void)
+static int __init eeh_init(void)
 {
 	struct pci_controller *hose, *tmp;
 	struct device_node *phb;
@@ -992,27 +684,34 @@ void __init eeh_init(void)
 	if (!eeh_ops) {
 		pr_warning("%s: Platform EEH operation not found\n",
 			__func__);
-		return;
+		return -EEXIST;
 	} else if ((ret = eeh_ops->init())) {
 		pr_warning("%s: Failed to call platform init function (%d)\n",
 			__func__, ret);
-		return;
+		return ret;
 	}
 
 	raw_spin_lock_init(&confirm_error_lock);
 
 	/* Enable EEH for all adapters */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		phb = hose->dn;
-		traverse_pci_devices(phb, eeh_early_enable, NULL);
+	if (eeh_probe_mode_devtree()) {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node) {
+			phb = hose->dn;
+			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
+		}
 	}
 
 	if (eeh_subsystem_enabled)
-		printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n");
+		pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
 	else
-		printk(KERN_WARNING "EEH: No capable adapters found\n");
+		pr_warning("EEH: No capable adapters found\n");
+
+	return ret;
 }
 
+core_initcall_sync(eeh_init);
+
 /**
  * eeh_add_device_early - Enable EEH for the indicated device_node
  * @dn: device node for which to set up EEH
@@ -1029,7 +728,7 @@ static void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
 
-	if (!dn || !of_node_to_eeh_dev(dn))
+	if (!of_node_to_eeh_dev(dn))
 		return;
 	phb = of_node_to_eeh_dev(dn)->phb;
 
@@ -1037,7 +736,8 @@ static void eeh_add_device_early(struct device_node *dn)
 	if (NULL == phb || 0 == phb->buid)
 		return;
 
-	eeh_early_enable(dn, NULL);
+	/* FIXME: hotplug support on POWERNV */
+	eeh_ops->of_probe(dn, NULL);
 }
 
 /**
@@ -1087,7 +787,7 @@ static void eeh_add_device_late(struct pci_dev *dev)
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 
-	pci_addr_cache_insert_device(dev);
+	eeh_addr_cache_insert_dev(dev);
 	eeh_sysfs_add_device(dev);
 }
 
@@ -1117,6 +817,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
 /**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
+ * @purge_pe: remove the PE or not
  *
  * This routine should be called when a device is removed from
  * a running system (e.g. by hotplug or dlpar).  It unregisters
@@ -1124,7 +825,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-static void eeh_remove_device(struct pci_dev *dev)
+static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 {
 	struct eeh_dev *edev;
 
@@ -1143,28 +844,30 @@ static void eeh_remove_device(struct pci_dev *dev)
 	dev->dev.archdata.edev = NULL;
 	pci_dev_put(dev);
 
-	pci_addr_cache_remove_device(dev);
+	eeh_rmv_from_parent_pe(edev, purge_pe);
+	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
 }
 
 /**
  * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
  * @dev: PCI device
+ * @purge_pe: remove the corresponding PE or not
  *
  * This routine must be called when a device is removed from the
  * running system through hotplug or dlpar. The corresponding
  * PCI address cache will be removed.
  */
-void eeh_remove_bus_device(struct pci_dev *dev)
+void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
 {
 	struct pci_bus *bus = dev->subordinate;
 	struct pci_dev *child, *tmp;
 
-	eeh_remove_device(dev);
+	eeh_remove_device(dev, purge_pe);
 
 	if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
-			 eeh_remove_bus_device(child);
+			 eeh_remove_bus_device(child, purge_pe);
 	}
 }
 EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c
index e5ae1c687c66..5a4c87903057 100644
--- a/arch/powerpc/platforms/pseries/eeh_cache.c
+++ b/arch/powerpc/platforms/pseries/eeh_cache.c
@@ -50,6 +50,7 @@ struct pci_io_addr_range {
 	struct rb_node rb_node;
 	unsigned long addr_lo;
 	unsigned long addr_hi;
+	struct eeh_dev *edev;
 	struct pci_dev *pcidev;
 	unsigned int flags;
 };
@@ -59,7 +60,7 @@ static struct pci_io_addr_cache {
 	spinlock_t piar_lock;
 } pci_io_addr_cache_root;
 
-static inline struct pci_dev *__pci_addr_cache_get_device(unsigned long addr)
+static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
 {
 	struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
 
@@ -74,7 +75,7 @@ static inline struct pci_dev *__pci_addr_cache_get_device(unsigned long addr)
 				n = n->rb_right;
 			} else {
 				pci_dev_get(piar->pcidev);
-				return piar->pcidev;
+				return piar->edev;
 			}
 		}
 	}
@@ -83,7 +84,7 @@ static inline struct pci_dev *__pci_addr_cache_get_device(unsigned long addr)
 }
 
 /**
- * pci_addr_cache_get_device - Get device, given only address
+ * eeh_addr_cache_get_dev - Get device, given only address
  * @addr: mmio (PIO) phys address or i/o port number
  *
  * Given an mmio phys address, or a port number, find a pci device
@@ -92,15 +93,15 @@ static inline struct pci_dev *__pci_addr_cache_get_device(unsigned long addr)
  * from zero (that is, they do *not* have pci_io_addr added in).
  * It is safe to call this function within an interrupt.
  */
-struct pci_dev *pci_addr_cache_get_device(unsigned long addr)
+struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr)
 {
-	struct pci_dev *dev;
+	struct eeh_dev *edev;
 	unsigned long flags;
 
 	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
-	dev = __pci_addr_cache_get_device(addr);
+	edev = __eeh_addr_cache_get_device(addr);
 	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-	return dev;
+	return edev;
 }
 
 #ifdef DEBUG
@@ -108,7 +109,7 @@ struct pci_dev *pci_addr_cache_get_device(unsigned long addr)
  * Handy-dandy debug print routine, does nothing more
  * than print out the contents of our addr cache.
  */
-static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
+static void eeh_addr_cache_print(struct pci_io_addr_cache *cache)
 {
 	struct rb_node *n;
 	int cnt = 0;
@@ -117,7 +118,7 @@ static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
 	while (n) {
 		struct pci_io_addr_range *piar;
 		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-		printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n",
+		pr_debug("PCI: %s addr range %d [%lx-%lx]: %s\n",
 		       (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
 		       piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
 		cnt++;
@@ -128,7 +129,7 @@ static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
 
 /* Insert address range into the rb tree. */
 static struct pci_io_addr_range *
-pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
+eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 		      unsigned long ahi, unsigned int flags)
 {
 	struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
@@ -146,23 +147,24 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 		} else {
 			if (dev != piar->pcidev ||
 			    alo != piar->addr_lo || ahi != piar->addr_hi) {
-				printk(KERN_WARNING "PIAR: overlapping address range\n");
+				pr_warning("PIAR: overlapping address range\n");
 			}
 			return piar;
 		}
 	}
-	piar = kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+	piar = kzalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
 	if (!piar)
 		return NULL;
 
 	pci_dev_get(dev);
 	piar->addr_lo = alo;
 	piar->addr_hi = ahi;
+	piar->edev = pci_dev_to_eeh_dev(dev);
 	piar->pcidev = dev;
 	piar->flags = flags;
 
 #ifdef DEBUG
-	printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
+	pr_debug("PIAR: insert range=[%lx:%lx] dev=%s\n",
 	                  alo, ahi, pci_name(dev));
 #endif
 
@@ -172,7 +174,7 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 	return piar;
 }
 
-static void __pci_addr_cache_insert_device(struct pci_dev *dev)
+static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct eeh_dev *edev;
@@ -180,7 +182,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev)
 
 	dn = pci_device_to_OF_node(dev);
 	if (!dn) {
-		printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
+		pr_warning("PCI: no pci dn found for dev=%s\n", pci_name(dev));
 		return;
 	}
 
@@ -192,8 +194,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev)
 	}
 
 	/* Skip any devices for which EEH is not enabled. */
-	if (!(edev->mode & EEH_MODE_SUPPORTED) ||
-	    edev->mode & EEH_MODE_NOCHECK) {
+	if (!edev->pe) {
 #ifdef DEBUG
 		pr_info("PCI: skip building address cache for=%s - %s\n",
 			pci_name(dev), dn->full_name);
@@ -212,19 +213,19 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev)
 			continue;
 		if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
 			 continue;
-		pci_addr_cache_insert(dev, start, end, flags);
+		eeh_addr_cache_insert(dev, start, end, flags);
 	}
 }
 
 /**
- * pci_addr_cache_insert_device - Add a device to the address cache
+ * eeh_addr_cache_insert_dev - Add a device to the address cache
  * @dev: PCI device whose I/O addresses we are interested in.
  *
  * In order to support the fast lookup of devices based on addresses,
  * we maintain a cache of devices that can be quickly searched.
  * This routine adds a device to that cache.
  */
-void pci_addr_cache_insert_device(struct pci_dev *dev)
+void eeh_addr_cache_insert_dev(struct pci_dev *dev)
 {
 	unsigned long flags;
 
@@ -233,11 +234,11 @@ void pci_addr_cache_insert_device(struct pci_dev *dev)
 		return;
 
 	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
-	__pci_addr_cache_insert_device(dev);
+	__eeh_addr_cache_insert_dev(dev);
 	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
 }
 
-static inline void __pci_addr_cache_remove_device(struct pci_dev *dev)
+static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
 {
 	struct rb_node *n;
 
@@ -258,7 +259,7 @@ restart:
 }
 
 /**
- * pci_addr_cache_remove_device - remove pci device from addr cache
+ * eeh_addr_cache_rmv_dev - remove pci device from addr cache
  * @dev: device to remove
  *
  * Remove a device from the addr-cache tree.
@@ -266,17 +267,17 @@ restart:
  * the tree multiple times (once per resource).
  * But so what; device removal doesn't need to be that fast.
  */
-void pci_addr_cache_remove_device(struct pci_dev *dev)
+void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
-	__pci_addr_cache_remove_device(dev);
+	__eeh_addr_cache_rmv_dev(dev);
 	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
 }
 
 /**
- * pci_addr_cache_build - Build a cache of I/O addresses
+ * eeh_addr_cache_build - Build a cache of I/O addresses
  *
  * Build a cache of pci i/o addresses.  This cache will be used to
  * find the pci device that corresponds to a given address.
@@ -284,7 +285,7 @@ void pci_addr_cache_remove_device(struct pci_dev *dev)
  * Must be run late in boot process, after the pci controllers
  * have been scanned for devices (after all device resources are known).
  */
-void __init pci_addr_cache_build(void)
+void __init eeh_addr_cache_build(void)
 {
 	struct device_node *dn;
 	struct eeh_dev *edev;
@@ -293,7 +294,7 @@ void __init pci_addr_cache_build(void)
 	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
 
 	for_each_pci_dev(dev) {
-		pci_addr_cache_insert_device(dev);
+		eeh_addr_cache_insert_dev(dev);
 
 		dn = pci_device_to_OF_node(dev);
 		if (!dn)
@@ -312,7 +313,7 @@ void __init pci_addr_cache_build(void)
 
 #ifdef DEBUG
 	/* Verify tree built up above, echo back the list of addrs. */
-	pci_addr_cache_print(&pci_io_addr_cache_root);
+	eeh_addr_cache_print(&pci_io_addr_cache_root);
 #endif
 }
 
diff --git a/arch/powerpc/platforms/pseries/eeh_dev.c b/arch/powerpc/platforms/pseries/eeh_dev.c
index c4507d095900..66442341d3a6 100644
--- a/arch/powerpc/platforms/pseries/eeh_dev.c
+++ b/arch/powerpc/platforms/pseries/eeh_dev.c
@@ -55,7 +55,7 @@ void * __devinit eeh_dev_init(struct device_node *dn, void *data)
 	struct eeh_dev *edev;
 
 	/* Allocate EEH device */
-	edev = zalloc_maybe_bootmem(sizeof(*edev), GFP_KERNEL);
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
 	if (!edev) {
 		pr_warning("%s: out of memory\n", __func__);
 		return NULL;
@@ -65,6 +65,7 @@ void * __devinit eeh_dev_init(struct device_node *dn, void *data)
 	PCI_DN(dn)->edev = edev;
 	edev->dn  = dn;
 	edev->phb = phb;
+	INIT_LIST_HEAD(&edev->list);
 
 	return NULL;
 }
@@ -80,6 +81,9 @@ void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb)
 {
 	struct device_node *dn = phb->dn;
 
+	/* EEH PE for PHB */
+	eeh_phb_pe_create(phb);
+
 	/* EEH device for PHB */
 	eeh_dev_init(dn, phb);
 
@@ -93,10 +97,16 @@ void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb)
  * Scan all the existing PHBs and create EEH devices for their OF
  * nodes and their children OF nodes
  */
-void __init eeh_dev_phb_init(void)
+static int __init eeh_dev_phb_init(void)
 {
 	struct pci_controller *phb, *tmp;
 
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		eeh_dev_phb_init_dynamic(phb);
+
+	pr_info("EEH: devices created\n");
+
+	return 0;
 }
+
+core_initcall(eeh_dev_phb_init);
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index baf92cd9dfab..a3fefb61097c 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <asm/eeh.h>
 #include <asm/eeh_event.h>
@@ -47,6 +48,41 @@ static inline const char *eeh_pcid_name(struct pci_dev *pdev)
 	return "";
 }
 
+/**
+ * eeh_pcid_get - Get the PCI device driver
+ * @pdev: PCI device
+ *
+ * The function is used to retrieve the PCI device driver for
+ * the indicated PCI device. Besides, we will increase the reference
+ * of the PCI device driver to prevent that being unloaded on
+ * the fly. Otherwise, kernel crash would be seen.
+ */
+static inline struct pci_driver *eeh_pcid_get(struct pci_dev *pdev)
+{
+	if (!pdev || !pdev->driver)
+		return NULL;
+
+	if (!try_module_get(pdev->driver->driver.owner))
+		return NULL;
+
+	return pdev->driver;
+}
+
+/**
+ * eeh_pcid_put - Dereference on the PCI device driver
+ * @pdev: PCI device
+ *
+ * The function is called to do dereference on the PCI device
+ * driver of the indicated PCI device.
+ */
+static inline void eeh_pcid_put(struct pci_dev *pdev)
+{
+	if (!pdev || !pdev->driver)
+		return;
+
+	module_put(pdev->driver->driver.owner);
+}
+
 #if 0
 static void print_device_node_tree(struct pci_dn *pdn, int dent)
 {
@@ -93,7 +129,7 @@ static void eeh_disable_irq(struct pci_dev *dev)
 	if (!irq_has_action(dev->irq))
 		return;
 
-	edev->mode |= EEH_MODE_IRQ_DISABLED;
+	edev->mode |= EEH_DEV_IRQ_DISABLED;
 	disable_irq_nosync(dev->irq);
 }
 
@@ -108,36 +144,44 @@ static void eeh_enable_irq(struct pci_dev *dev)
 {
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
 
-	if ((edev->mode) & EEH_MODE_IRQ_DISABLED) {
-		edev->mode &= ~EEH_MODE_IRQ_DISABLED;
+	if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
+		edev->mode &= ~EEH_DEV_IRQ_DISABLED;
 		enable_irq(dev->irq);
 	}
 }
 
 /**
  * eeh_report_error - Report pci error to each device driver
- * @dev: PCI device
+ * @data: eeh device
  * @userdata: return value
  * 
  * Report an EEH error to each device driver, collect up and 
  * merge the device driver responses. Cumulative response 
  * passed back in "userdata".
  */
-static int eeh_report_error(struct pci_dev *dev, void *userdata)
+static void *eeh_report_error(void *data, void *userdata)
 {
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	enum pci_ers_result rc, *res = userdata;
-	struct pci_driver *driver = dev->driver;
+	struct pci_driver *driver;
 
+	/* We might not have the associated PCI device,
+	 * then we should continue for next one.
+	 */
+	if (!dev) return NULL;
 	dev->error_state = pci_channel_io_frozen;
 
-	if (!driver)
-		return 0;
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
-	    !driver->err_handler->error_detected)
-		return 0;
+	    !driver->err_handler->error_detected) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
 
 	rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
 
@@ -145,27 +189,34 @@ static int eeh_report_error(struct pci_dev *dev, void *userdata)
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
 
-	return 0;
+	eeh_pcid_put(dev);
+	return NULL;
 }
 
 /**
  * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled
- * @dev: PCI device
+ * @data: eeh device
  * @userdata: return value
  *
  * Tells each device driver that IO ports, MMIO and config space I/O
  * are now enabled. Collects up and merges the device driver responses.
  * Cumulative response passed back in "userdata".
  */
-static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
+static void *eeh_report_mmio_enabled(void *data, void *userdata)
 {
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	enum pci_ers_result rc, *res = userdata;
-	struct pci_driver *driver = dev->driver;
+	struct pci_driver *driver;
 
-	if (!driver ||
-	    !driver->err_handler ||
-	    !driver->err_handler->mmio_enabled)
-		return 0;
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
+	if (!driver->err_handler ||
+	    !driver->err_handler->mmio_enabled) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
 
 	rc = driver->err_handler->mmio_enabled(dev);
 
@@ -173,12 +224,13 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
 
-	return 0;
+	eeh_pcid_put(dev);
+	return NULL;
 }
 
 /**
  * eeh_report_reset - Tell device that slot has been reset
- * @dev: PCI device
+ * @data: eeh device
  * @userdata: return value
  *
  * This routine must be called while EEH tries to reset particular
@@ -186,21 +238,26 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
  * some actions, usually to save data the driver needs so that the
  * driver can work again while the device is recovered.
  */
-static int eeh_report_reset(struct pci_dev *dev, void *userdata)
+static void *eeh_report_reset(void *data, void *userdata)
 {
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	enum pci_ers_result rc, *res = userdata;
-	struct pci_driver *driver = dev->driver;
-
-	if (!driver)
-		return 0;
+	struct pci_driver *driver;
 
+	if (!dev) return NULL;
 	dev->error_state = pci_channel_io_normal;
 
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
-	    !driver->err_handler->slot_reset)
-		return 0;
+	    !driver->err_handler->slot_reset) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
 
 	rc = driver->err_handler->slot_reset(dev);
 	if ((*res == PCI_ERS_RESULT_NONE) ||
@@ -208,109 +265,115 @@ static int eeh_report_reset(struct pci_dev *dev, void *userdata)
 	if (*res == PCI_ERS_RESULT_DISCONNECT &&
 	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 
-	return 0;
+	eeh_pcid_put(dev);
+	return NULL;
 }
 
 /**
  * eeh_report_resume - Tell device to resume normal operations
- * @dev: PCI device
+ * @data: eeh device
  * @userdata: return value
  *
  * This routine must be called to notify the device driver that it
  * could resume so that the device driver can do some initialization
  * to make the recovered device work again.
  */
-static int eeh_report_resume(struct pci_dev *dev, void *userdata)
+static void *eeh_report_resume(void *data, void *userdata)
 {
-	struct pci_driver *driver = dev->driver;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	struct pci_driver *driver;
 
+	if (!dev) return NULL;
 	dev->error_state = pci_channel_io_normal;
 
-	if (!driver)
-		return 0;
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
 
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
-	    !driver->err_handler->resume)
-		return 0;
+	    !driver->err_handler->resume) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
 
 	driver->err_handler->resume(dev);
 
-	return 0;
+	eeh_pcid_put(dev);
+	return NULL;
 }
 
 /**
  * eeh_report_failure - Tell device driver that device is dead.
- * @dev: PCI device
+ * @data: eeh device
  * @userdata: return value
  *
  * This informs the device driver that the device is permanently
  * dead, and that no further recovery attempts will be made on it.
  */
-static int eeh_report_failure(struct pci_dev *dev, void *userdata)
+static void *eeh_report_failure(void *data, void *userdata)
 {
-	struct pci_driver *driver = dev->driver;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	struct pci_driver *driver;
 
+	if (!dev) return NULL;
 	dev->error_state = pci_channel_io_perm_failure;
 
-	if (!driver)
-		return 0;
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
-	    !driver->err_handler->error_detected)
-		return 0;
+	    !driver->err_handler->error_detected) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
 
 	driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
 
-	return 0;
+	eeh_pcid_put(dev);
+	return NULL;
 }
 
 /**
  * eeh_reset_device - Perform actual reset of a pci slot
- * @edev: PE associated EEH device
+ * @pe: EEH PE
  * @bus: PCI bus corresponding to the isolcated slot
  *
  * This routine must be called to do reset on the indicated PE.
  * During the reset, udev might be invoked because those affected
  * PCI devices will be removed and then added.
  */
-static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
+static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 {
-	struct device_node *dn;
 	int cnt, rc;
 
 	/* pcibios will clear the counter; save the value */
-	cnt = edev->freeze_count;
+	cnt = pe->freeze_count;
 
+	/*
+	 * We don't remove the corresponding PE instances because
+	 * we need the information afterwords. The attached EEH
+	 * devices are expected to be attached soon when calling
+	 * into pcibios_add_pci_devices().
+	 */
 	if (bus)
-		pcibios_remove_pci_devices(bus);
+		__pcibios_remove_pci_devices(bus, 0);
 
 	/* Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
 	 * up if the reset failed for some reason.
 	 */
-	rc = eeh_reset_pe(edev);
+	rc = eeh_reset_pe(pe);
 	if (rc)
 		return rc;
 
-	/* Walk over all functions on this device. */
-	dn = eeh_dev_to_of_node(edev);
-	if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
-		dn = dn->parent->child;
-
-	while (dn) {
-		struct eeh_dev *pedev = of_node_to_eeh_dev(dn);
-
-		/* On Power4, always true because eeh_pe_config_addr=0 */
-		if (edev->pe_config_addr == pedev->pe_config_addr) {
-			eeh_ops->configure_bridge(dn);
-			eeh_restore_bars(pedev);
- 		}
-		dn = dn->sibling;
-	}
+	/* Restore PE */
+	eeh_ops->configure_bridge(pe);
+	eeh_pe_restore_bars(pe);
 
 	/* Give the system 5 seconds to finish running the user-space
 	 * hotplug shutdown scripts, e.g. ifdown for ethernet.  Yes, 
@@ -322,7 +385,7 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
 		ssleep(5);
 		pcibios_add_pci_devices(bus);
 	}
-	edev->freeze_count = cnt;
+	pe->freeze_count = cnt;
 
 	return 0;
 }
@@ -334,7 +397,7 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
 
 /**
  * eeh_handle_event - Reset a PCI device after hard lockup.
- * @event: EEH event
+ * @pe: EEH PE
  *
  * While PHB detects address or data parity errors on particular PCI
  * slot, the associated PE will be frozen. Besides, DMA's occurring
@@ -349,69 +412,24 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
  * drivers (which cause a second set of hotplug events to go out to
  * userspace).
  */
-struct eeh_dev *handle_eeh_events(struct eeh_event *event)
+void eeh_handle_event(struct eeh_pe *pe)
 {
-	struct device_node *frozen_dn;
-	struct eeh_dev *frozen_edev;
 	struct pci_bus *frozen_bus;
 	int rc = 0;
 	enum pci_ers_result result = PCI_ERS_RESULT_NONE;
-	const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str;
-
-	frozen_dn = eeh_find_device_pe(eeh_dev_to_of_node(event->edev));
-	if (!frozen_dn) {
-		location = of_get_property(eeh_dev_to_of_node(event->edev), "ibm,loc-code", NULL);
-		location = location ? location : "unknown";
-		printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
-		                "for location=%s pci addr=%s\n",
-			location, eeh_pci_name(eeh_dev_to_pci_dev(event->edev)));
-		return NULL;
-	}
-
-	frozen_bus = pcibios_find_pci_bus(frozen_dn);
-	location = of_get_property(frozen_dn, "ibm,loc-code", NULL);
-	location = location ? location : "unknown";
-
-	/* There are two different styles for coming up with the PE.
-	 * In the old style, it was the highest EEH-capable device
-	 * which was always an EADS pci bridge.  In the new style,
-	 * there might not be any EADS bridges, and even when there are,
-	 * the firmware marks them as "EEH incapable". So another
-	 * two-step is needed to find the pci bus..
-	 */
-	if (!frozen_bus)
-		frozen_bus = pcibios_find_pci_bus(frozen_dn->parent);
 
+	frozen_bus = eeh_pe_bus_get(pe);
 	if (!frozen_bus) {
-		printk(KERN_ERR "EEH: Cannot find PCI bus "
-		        "for location=%s dn=%s\n",
-		        location, frozen_dn->full_name);
-		return NULL;
+		pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
+			__func__, pe->phb->global_number, pe->addr);
+		return;
 	}
 
-	frozen_edev = of_node_to_eeh_dev(frozen_dn);
-	frozen_edev->freeze_count++;
-	pci_str = eeh_pci_name(eeh_dev_to_pci_dev(event->edev));
-	drv_str = eeh_pcid_name(eeh_dev_to_pci_dev(event->edev));
-
-	if (frozen_edev->freeze_count > EEH_MAX_ALLOWED_FREEZES)
+	pe->freeze_count++;
+	if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES)
 		goto excess_failures;
-
-	printk(KERN_WARNING
-	   "EEH: This PCI device has failed %d times in the last hour:\n",
-		frozen_edev->freeze_count);
-
-	if (frozen_edev->pdev) {
-		bus_pci_str = pci_name(frozen_edev->pdev);
-		bus_drv_str = eeh_pcid_name(frozen_edev->pdev);
-		printk(KERN_WARNING
-			"EEH: Bus location=%s driver=%s pci addr=%s\n",
-			location, bus_drv_str, bus_pci_str);
-	}
-
-	printk(KERN_WARNING
-		"EEH: Device location=%s driver=%s pci addr=%s\n",
-		location, drv_str, pci_str);
+	pr_warning("EEH: This PCI device has failed %d times in the last hour\n",
+		pe->freeze_count);
 
 	/* Walk the various device drivers attached to this slot through
 	 * a reset sequence, giving each an opportunity to do what it needs
@@ -419,12 +437,12 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
 	 * status ... if any child can't handle the reset, then the entire
 	 * slot is dlpar removed and added.
 	 */
-	pci_walk_bus(frozen_bus, eeh_report_error, &result);
+	eeh_pe_dev_traverse(pe, eeh_report_error, &result);
 
 	/* Get the current PCI slot state. This can take a long time,
 	 * sometimes over 3 seconds for certain systems.
 	 */
-	rc = eeh_ops->wait_state(eeh_dev_to_of_node(frozen_edev), MAX_WAIT_FOR_RECOVERY*1000);
+	rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
 	if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
 		printk(KERN_WARNING "EEH: Permanent failure\n");
 		goto hard_fail;
@@ -434,14 +452,14 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
 	 * don't post the error log until after all dev drivers
 	 * have been informed.
 	 */
-	eeh_slot_error_detail(frozen_edev, EEH_LOG_TEMP);
+	eeh_slot_error_detail(pe, EEH_LOG_TEMP);
 
 	/* If all device drivers were EEH-unaware, then shut
 	 * down all of the device drivers, and hope they
 	 * go down willingly, without panicing the system.
 	 */
 	if (result == PCI_ERS_RESULT_NONE) {
-		rc = eeh_reset_device(frozen_edev, frozen_bus);
+		rc = eeh_reset_device(pe, frozen_bus);
 		if (rc) {
 			printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
 			goto hard_fail;
@@ -450,7 +468,7 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
 
 	/* If all devices reported they can proceed, then re-enable MMIO */
 	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
-		rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_MMIO);
+		rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
 
 		if (rc < 0)
 			goto hard_fail;
@@ -458,13 +476,13 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
 			result = PCI_ERS_RESULT_NEED_RESET;
 		} else {
 			result = PCI_ERS_RESULT_NONE;
-			pci_walk_bus(frozen_bus, eeh_report_mmio_enabled, &result);
+			eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
 		}
 	}
 
 	/* If all devices reported they can proceed, then re-enable DMA */
 	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
-		rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_DMA);
+		rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
 
 		if (rc < 0)
 			goto hard_fail;
@@ -482,13 +500,13 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
 
 	/* If any device called out for a reset, then reset the slot */
 	if (result == PCI_ERS_RESULT_NEED_RESET) {
-		rc = eeh_reset_device(frozen_edev, NULL);
+		rc = eeh_reset_device(pe, NULL);
 		if (rc) {
 			printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
 			goto hard_fail;
 		}
 		result = PCI_ERS_RESULT_NONE;
-		pci_walk_bus(frozen_bus, eeh_report_reset, &result);
+		eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
 	}
 
 	/* All devices should claim they have recovered by now. */
@@ -499,9 +517,9 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
 	}
 
 	/* Tell all device drivers that they can resume operations */
-	pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
+	eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
 
-	return frozen_edev;
+	return;
 	
 excess_failures:
 	/*
@@ -509,30 +527,26 @@ excess_failures:
 	 * are due to poorly seated PCI cards. Only 10% or so are
 	 * due to actual, failed cards.
 	 */
-	printk(KERN_ERR
-	   "EEH: PCI device at location=%s driver=%s pci addr=%s\n"
-		"has failed %d times in the last hour "
-		"and has been permanently disabled.\n"
-		"Please try reseating this device or replacing it.\n",
-		location, drv_str, pci_str, frozen_edev->freeze_count);
+	pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n"
+	       "last hour and has been permanently disabled.\n"
+	       "Please try reseating or replacing it.\n",
+		pe->phb->global_number, pe->addr,
+		pe->freeze_count);
 	goto perm_error;
 
 hard_fail:
-	printk(KERN_ERR
-	   "EEH: Unable to recover from failure of PCI device "
-	   "at location=%s driver=%s pci addr=%s\n"
-	   "Please try reseating this device or replacing it.\n",
-		location, drv_str, pci_str);
+	pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n"
+	       "Please try reseating or replacing it\n",
+		pe->phb->global_number, pe->addr);
 
 perm_error:
-	eeh_slot_error_detail(frozen_edev, EEH_LOG_PERM);
+	eeh_slot_error_detail(pe, EEH_LOG_PERM);
 
 	/* Notify all devices that they're about to go down. */
-	pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
+	eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
 
 	/* Shut down the device drivers for good. */
-	pcibios_remove_pci_devices(frozen_bus);
-
-	return NULL;
+	if (frozen_bus)
+		pcibios_remove_pci_devices(frozen_bus);
 }
 
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index fb506317ebb0..51faaac8abe6 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -57,7 +57,7 @@ static int eeh_event_handler(void * dummy)
 {
 	unsigned long flags;
 	struct eeh_event *event;
-	struct eeh_dev *edev;
+	struct eeh_pe *pe;
 
 	set_task_comm(current, "eehd");
 
@@ -76,28 +76,23 @@ static int eeh_event_handler(void * dummy)
 
 	/* Serialize processing of EEH events */
 	mutex_lock(&eeh_event_mutex);
-	edev = event->edev;
-	eeh_mark_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);
-
-	printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
-	       eeh_pci_name(edev->pdev));
+	pe = event->pe;
+	eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
+	pr_info("EEH: Detected PCI bus error on PHB#%d-PE#%x\n",
+		pe->phb->global_number, pe->addr);
 
 	set_current_state(TASK_INTERRUPTIBLE);	/* Don't add to load average */
-	edev = handle_eeh_events(event);
-
-	if (edev) {
-		eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);
-		pci_dev_put(edev->pdev);
-	}
+	eeh_handle_event(pe);
+	eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
 
 	kfree(event);
 	mutex_unlock(&eeh_event_mutex);
 
 	/* If there are no new errors after an hour, clear the counter. */
-	if (edev && edev->freeze_count>0) {
+	if (pe && pe->freeze_count > 0) {
 		msleep_interruptible(3600*1000);
-		if (edev->freeze_count>0)
-			edev->freeze_count--;
+		if (pe->freeze_count > 0)
+			pe->freeze_count--;
 
 	}
 
@@ -119,36 +114,23 @@ static void eeh_thread_launcher(struct work_struct *dummy)
 
 /**
  * eeh_send_failure_event - Generate a PCI error event
- * @edev: EEH device
+ * @pe: EEH PE
  *
  * This routine can be called within an interrupt context;
  * the actual event will be delivered in a normal context
  * (from a workqueue).
  */
-int eeh_send_failure_event(struct eeh_dev *edev)
+int eeh_send_failure_event(struct eeh_pe *pe)
 {
 	unsigned long flags;
 	struct eeh_event *event;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
-	const char *location;
-
-	if (!mem_init_done) {
-		printk(KERN_ERR "EEH: event during early boot not handled\n");
-		location = of_get_property(dn, "ibm,loc-code", NULL);
-		printk(KERN_ERR "EEH: device node = %s\n", dn->full_name);
-		printk(KERN_ERR "EEH: PCI location = %s\n", location);
-		return 1;
-	}
-	event = kmalloc(sizeof(*event), GFP_ATOMIC);
-	if (event == NULL) {
-		printk(KERN_ERR "EEH: out of memory, event not handled\n");
-		return 1;
- 	}
-
-	if (edev->pdev)
-		pci_dev_get(edev->pdev);
 
-	event->edev = edev;
+	event = kzalloc(sizeof(*event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("EEH: out of memory, event not handled\n");
+		return -ENOMEM;
+	}
+	event->pe = pe;
 
 	/* We may or may not be called in an interrupt context */
 	spin_lock_irqsave(&eeh_eventlist_lock, flags);
diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c
new file mode 100644
index 000000000000..797cd181dc3f
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_pe.c
@@ -0,0 +1,652 @@
+/*
+ * The file intends to implement PE based on the information from
+ * platforms. Basically, there have 3 types of PEs: PHB/Bus/Device.
+ * All the PEs should be organized as hierarchy tree. The first level
+ * of the tree will be associated to existing PHBs since the particular
+ * PE is only meaningful in one PHB domain.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/export.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+static LIST_HEAD(eeh_phb_pe);
+
+/**
+ * eeh_pe_alloc - Allocate PE
+ * @phb: PCI controller
+ * @type: PE type
+ *
+ * Allocate PE instance dynamically.
+ */
+static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type)
+{
+	struct eeh_pe *pe;
+
+	/* Allocate PHB PE */
+	pe = kzalloc(sizeof(struct eeh_pe), GFP_KERNEL);
+	if (!pe) return NULL;
+
+	/* Initialize PHB PE */
+	pe->type = type;
+	pe->phb = phb;
+	INIT_LIST_HEAD(&pe->child_list);
+	INIT_LIST_HEAD(&pe->child);
+	INIT_LIST_HEAD(&pe->edevs);
+
+	return pe;
+}
+
+/**
+ * eeh_phb_pe_create - Create PHB PE
+ * @phb: PCI controller
+ *
+ * The function should be called while the PHB is detected during
+ * system boot or PCI hotplug in order to create PHB PE.
+ */
+int __devinit eeh_phb_pe_create(struct pci_controller *phb)
+{
+	struct eeh_pe *pe;
+
+	/* Allocate PHB PE */
+	pe = eeh_pe_alloc(phb, EEH_PE_PHB);
+	if (!pe) {
+		pr_err("%s: out of memory!\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Put it into the list */
+	eeh_lock();
+	list_add_tail(&pe->child, &eeh_phb_pe);
+	eeh_unlock();
+
+	pr_debug("EEH: Add PE for PHB#%d\n", phb->global_number);
+
+	return 0;
+}
+
+/**
+ * eeh_phb_pe_get - Retrieve PHB PE based on the given PHB
+ * @phb: PCI controller
+ *
+ * The overall PEs form hierarchy tree. The first layer of the
+ * hierarchy tree is composed of PHB PEs. The function is used
+ * to retrieve the corresponding PHB PE according to the given PHB.
+ */
+static struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb)
+{
+	struct eeh_pe *pe;
+
+	list_for_each_entry(pe, &eeh_phb_pe, child) {
+		/*
+		 * Actually, we needn't check the type since
+		 * the PE for PHB has been determined when that
+		 * was created.
+		 */
+		if ((pe->type & EEH_PE_PHB) && pe->phb == phb)
+			return pe;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_next - Retrieve the next PE in the tree
+ * @pe: current PE
+ * @root: root PE
+ *
+ * The function is used to retrieve the next PE in the
+ * hierarchy PE tree.
+ */
+static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
+				  struct eeh_pe *root)
+{
+	struct list_head *next = pe->child_list.next;
+
+	if (next == &pe->child_list) {
+		while (1) {
+			if (pe == root)
+				return NULL;
+			next = pe->child.next;
+			if (next != &pe->parent->child_list)
+				break;
+			pe = pe->parent;
+		}
+	}
+
+	return list_entry(next, struct eeh_pe, child);
+}
+
+/**
+ * eeh_pe_traverse - Traverse PEs in the specified PHB
+ * @root: root PE
+ * @fn: callback
+ * @flag: extra parameter to callback
+ *
+ * The function is used to traverse the specified PE and its
+ * child PEs. The traversing is to be terminated once the
+ * callback returns something other than NULL, or no more PEs
+ * to be traversed.
+ */
+static void *eeh_pe_traverse(struct eeh_pe *root,
+			eeh_traverse_func fn, void *flag)
+{
+	struct eeh_pe *pe;
+	void *ret;
+
+	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
+		ret = fn(pe, flag);
+		if (ret) return ret;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_dev_traverse - Traverse the devices from the PE
+ * @root: EEH PE
+ * @fn: function callback
+ * @flag: extra parameter to callback
+ *
+ * The function is used to traverse the devices of the specified
+ * PE and its child PEs.
+ */
+void *eeh_pe_dev_traverse(struct eeh_pe *root,
+		eeh_traverse_func fn, void *flag)
+{
+	struct eeh_pe *pe;
+	struct eeh_dev *edev;
+	void *ret;
+
+	if (!root) {
+		pr_warning("%s: Invalid PE %p\n", __func__, root);
+		return NULL;
+	}
+
+	eeh_lock();
+
+	/* Traverse root PE */
+	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
+		eeh_pe_for_each_dev(pe, edev) {
+			ret = fn(edev, flag);
+			if (ret) {
+				eeh_unlock();
+				return ret;
+			}
+		}
+	}
+
+	eeh_unlock();
+
+	return NULL;
+}
+
+/**
+ * __eeh_pe_get - Check the PE address
+ * @data: EEH PE
+ * @flag: EEH device
+ *
+ * For one particular PE, it can be identified by PE address
+ * or tranditional BDF address. BDF address is composed of
+ * Bus/Device/Function number. The extra data referred by flag
+ * indicates which type of address should be used.
+ */
+static void *__eeh_pe_get(void *data, void *flag)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	struct eeh_dev *edev = (struct eeh_dev *)flag;
+
+	/* Unexpected PHB PE */
+	if (pe->type & EEH_PE_PHB)
+		return NULL;
+
+	/* We prefer PE address */
+	if (edev->pe_config_addr &&
+	   (edev->pe_config_addr == pe->addr))
+		return pe;
+
+	/* Try BDF address */
+	if (edev->pe_config_addr &&
+	   (edev->config_addr == pe->config_addr))
+		return pe;
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_get - Search PE based on the given address
+ * @edev: EEH device
+ *
+ * Search the corresponding PE based on the specified address which
+ * is included in the eeh device. The function is used to check if
+ * the associated PE has been created against the PE address. It's
+ * notable that the PE address has 2 format: traditional PE address
+ * which is composed of PCI bus/device/function number, or unified
+ * PE address.
+ */
+static struct eeh_pe *eeh_pe_get(struct eeh_dev *edev)
+{
+	struct eeh_pe *root = eeh_phb_pe_get(edev->phb);
+	struct eeh_pe *pe;
+
+	pe = eeh_pe_traverse(root, __eeh_pe_get, edev);
+
+	return pe;
+}
+
+/**
+ * eeh_pe_get_parent - Retrieve the parent PE
+ * @edev: EEH device
+ *
+ * The whole PEs existing in the system are organized as hierarchy
+ * tree. The function is used to retrieve the parent PE according
+ * to the parent EEH device.
+ */
+static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
+{
+	struct device_node *dn;
+	struct eeh_dev *parent;
+
+	/*
+	 * It might have the case for the indirect parent
+	 * EEH device already having associated PE, but
+	 * the direct parent EEH device doesn't have yet.
+	 */
+	dn = edev->dn->parent;
+	while (dn) {
+		/* We're poking out of PCI territory */
+		if (!PCI_DN(dn)) return NULL;
+
+		parent = of_node_to_eeh_dev(dn);
+		/* We're poking out of PCI territory */
+		if (!parent) return NULL;
+
+		if (parent->pe)
+			return parent->pe;
+
+		dn = dn->parent;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_add_to_parent_pe - Add EEH device to parent PE
+ * @edev: EEH device
+ *
+ * Add EEH device to the parent PE. If the parent PE already
+ * exists, the PE type will be changed to EEH_PE_BUS. Otherwise,
+ * we have to create new PE to hold the EEH device and the new
+ * PE will be linked to its parent PE as well.
+ */
+int eeh_add_to_parent_pe(struct eeh_dev *edev)
+{
+	struct eeh_pe *pe, *parent;
+
+	eeh_lock();
+
+	/*
+	 * Search the PE has been existing or not according
+	 * to the PE address. If that has been existing, the
+	 * PE should be composed of PCI bus and its subordinate
+	 * components.
+	 */
+	pe = eeh_pe_get(edev);
+	if (pe && !(pe->type & EEH_PE_INVALID)) {
+		if (!edev->pe_config_addr) {
+			eeh_unlock();
+			pr_err("%s: PE with addr 0x%x already exists\n",
+				__func__, edev->config_addr);
+			return -EEXIST;
+		}
+
+		/* Mark the PE as type of PCI bus */
+		pe->type = EEH_PE_BUS;
+		edev->pe = pe;
+
+		/* Put the edev to PE */
+		list_add_tail(&edev->list, &pe->edevs);
+		eeh_unlock();
+		pr_debug("EEH: Add %s to Bus PE#%x\n",
+			edev->dn->full_name, pe->addr);
+
+		return 0;
+	} else if (pe && (pe->type & EEH_PE_INVALID)) {
+		list_add_tail(&edev->list, &pe->edevs);
+		edev->pe = pe;
+		/*
+		 * We're running to here because of PCI hotplug caused by
+		 * EEH recovery. We need clear EEH_PE_INVALID until the top.
+		 */
+		parent = pe;
+		while (parent) {
+			if (!(parent->type & EEH_PE_INVALID))
+				break;
+			parent->type &= ~EEH_PE_INVALID;
+			parent = parent->parent;
+		}
+		eeh_unlock();
+		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
+			edev->dn->full_name, pe->addr, pe->parent->addr);
+
+		return 0;
+	}
+
+	/* Create a new EEH PE */
+	pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE);
+	if (!pe) {
+		eeh_unlock();
+		pr_err("%s: out of memory!\n", __func__);
+		return -ENOMEM;
+	}
+	pe->addr	= edev->pe_config_addr;
+	pe->config_addr	= edev->config_addr;
+
+	/*
+	 * Put the new EEH PE into hierarchy tree. If the parent
+	 * can't be found, the newly created PE will be attached
+	 * to PHB directly. Otherwise, we have to associate the
+	 * PE with its parent.
+	 */
+	parent = eeh_pe_get_parent(edev);
+	if (!parent) {
+		parent = eeh_phb_pe_get(edev->phb);
+		if (!parent) {
+			eeh_unlock();
+			pr_err("%s: No PHB PE is found (PHB Domain=%d)\n",
+				__func__, edev->phb->global_number);
+			edev->pe = NULL;
+			kfree(pe);
+			return -EEXIST;
+		}
+	}
+	pe->parent = parent;
+
+	/*
+	 * Put the newly created PE into the child list and
+	 * link the EEH device accordingly.
+	 */
+	list_add_tail(&pe->child, &parent->child_list);
+	list_add_tail(&edev->list, &pe->edevs);
+	edev->pe = pe;
+	eeh_unlock();
+	pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
+		edev->dn->full_name, pe->addr, pe->parent->addr);
+
+	return 0;
+}
+
+/**
+ * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
+ * @edev: EEH device
+ * @purge_pe: remove PE or not
+ *
+ * The PE hierarchy tree might be changed when doing PCI hotplug.
+ * Also, the PCI devices or buses could be removed from the system
+ * during EEH recovery. So we have to call the function remove the
+ * corresponding PE accordingly if necessary.
+ */
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+{
+	struct eeh_pe *pe, *parent, *child;
+	int cnt;
+
+	if (!edev->pe) {
+		pr_warning("%s: No PE found for EEH device %s\n",
+			__func__, edev->dn->full_name);
+		return -EEXIST;
+	}
+
+	eeh_lock();
+
+	/* Remove the EEH device */
+	pe = edev->pe;
+	edev->pe = NULL;
+	list_del(&edev->list);
+
+	/*
+	 * Check if the parent PE includes any EEH devices.
+	 * If not, we should delete that. Also, we should
+	 * delete the parent PE if it doesn't have associated
+	 * child PEs and EEH devices.
+	 */
+	while (1) {
+		parent = pe->parent;
+		if (pe->type & EEH_PE_PHB)
+			break;
+
+		if (purge_pe) {
+			if (list_empty(&pe->edevs) &&
+			    list_empty(&pe->child_list)) {
+				list_del(&pe->child);
+				kfree(pe);
+			} else {
+				break;
+			}
+		} else {
+			if (list_empty(&pe->edevs)) {
+				cnt = 0;
+				list_for_each_entry(child, &pe->child_list, child) {
+					if (!(pe->type & EEH_PE_INVALID)) {
+						cnt++;
+						break;
+					}
+				}
+
+				if (!cnt)
+					pe->type |= EEH_PE_INVALID;
+				else
+					break;
+			}
+		}
+
+		pe = parent;
+	}
+
+	eeh_unlock();
+
+	return 0;
+}
+
+/**
+ * __eeh_pe_state_mark - Mark the state for the PE
+ * @data: EEH PE
+ * @flag: state
+ *
+ * The function is used to mark the indicated state for the given
+ * PE. Also, the associated PCI devices will be put into IO frozen
+ * state as well.
+ */
+static void *__eeh_pe_state_mark(void *data, void *flag)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	int state = *((int *)flag);
+	struct eeh_dev *tmp;
+	struct pci_dev *pdev;
+
+	/*
+	 * Mark the PE with the indicated state. Also,
+	 * the associated PCI device will be put into
+	 * I/O frozen state to avoid I/O accesses from
+	 * the PCI device driver.
+	 */
+	pe->state |= state;
+	eeh_pe_for_each_dev(pe, tmp) {
+		pdev = eeh_dev_to_pci_dev(tmp);
+		if (pdev)
+			pdev->error_state = pci_channel_io_frozen;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_state_mark - Mark specified state for PE and its associated device
+ * @pe: EEH PE
+ *
+ * EEH error affects the current PE and its child PEs. The function
+ * is used to mark appropriate state for the affected PEs and the
+ * associated devices.
+ */
+void eeh_pe_state_mark(struct eeh_pe *pe, int state)
+{
+	eeh_lock();
+	eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
+	eeh_unlock();
+}
+
+/**
+ * __eeh_pe_state_clear - Clear state for the PE
+ * @data: EEH PE
+ * @flag: state
+ *
+ * The function is used to clear the indicated state from the
+ * given PE. Besides, we also clear the check count of the PE
+ * as well.
+ */
+static void *__eeh_pe_state_clear(void *data, void *flag)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	int state = *((int *)flag);
+
+	pe->state &= ~state;
+	pe->check_count = 0;
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_state_clear - Clear state for the PE and its children
+ * @pe: PE
+ * @state: state to be cleared
+ *
+ * When the PE and its children has been recovered from error,
+ * we need clear the error state for that. The function is used
+ * for the purpose.
+ */
+void eeh_pe_state_clear(struct eeh_pe *pe, int state)
+{
+	eeh_lock();
+	eeh_pe_traverse(pe, __eeh_pe_state_clear, &state);
+	eeh_unlock();
+}
+
+/**
+ * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
+ * @data: EEH device
+ * @flag: Unused
+ *
+ * Loads the PCI configuration space base address registers,
+ * the expansion ROM base address, the latency timer, and etc.
+ * from the saved values in the device node.
+ */
+static void *eeh_restore_one_device_bars(void *data, void *flag)
+{
+	int i;
+	u32 cmd;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct device_node *dn = eeh_dev_to_of_node(edev);
+
+	for (i = 4; i < 10; i++)
+		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+	/* 12 == Expansion ROM Address */
+	eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
+
+#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
+#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
+
+	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+		SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+	eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+		SAVED_BYTE(PCI_LATENCY_TIMER));
+
+	/* max latency, min grant, interrupt pin and line */
+	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+
+	/*
+	 * Restore PERR & SERR bits, some devices require it,
+	 * don't touch the other command bits
+	 */
+	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
+	if (edev->config_space[1] & PCI_COMMAND_PARITY)
+		cmd |= PCI_COMMAND_PARITY;
+	else
+		cmd &= ~PCI_COMMAND_PARITY;
+	if (edev->config_space[1] & PCI_COMMAND_SERR)
+		cmd |= PCI_COMMAND_SERR;
+	else
+		cmd &= ~PCI_COMMAND_SERR;
+	eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_restore_bars - Restore the PCI config space info
+ * @pe: EEH PE
+ *
+ * This routine performs a recursive walk to the children
+ * of this device as well.
+ */
+void eeh_pe_restore_bars(struct eeh_pe *pe)
+{
+	/*
+	 * We needn't take the EEH lock since eeh_pe_dev_traverse()
+	 * will take that.
+	 */
+	eeh_pe_dev_traverse(pe, eeh_restore_one_device_bars, NULL);
+}
+
+/**
+ * eeh_pe_bus_get - Retrieve PCI bus according to the given PE
+ * @pe: EEH PE
+ *
+ * Retrieve the PCI bus according to the given PE. Basically,
+ * there're 3 types of PEs: PHB/Bus/Device. For PHB PE, the
+ * primary PCI bus will be retrieved. The parent bus will be
+ * returned for BUS PE. However, we don't have associated PCI
+ * bus for DEVICE PE.
+ */
+struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
+{
+	struct pci_bus *bus = NULL;
+	struct eeh_dev *edev;
+	struct pci_dev *pdev;
+
+	eeh_lock();
+
+	if (pe->type & EEH_PE_PHB) {
+		bus = pe->phb->bus;
+	} else if (pe->type & EEH_PE_BUS) {
+		edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
+		pdev = eeh_dev_to_pci_dev(edev);
+		if (pdev)
+			bus = pdev->bus;
+	}
+
+	eeh_unlock();
+
+	return bus;
+}
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index c33360ec4f4f..19506f935737 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -129,27 +129,117 @@ static int pseries_eeh_init(void)
 		eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
 	}
 
+	/* Set EEH probe mode */
+	eeh_probe_mode_set(EEH_PROBE_MODE_DEVTREE);
+
 	return 0;
 }
 
 /**
+ * pseries_eeh_of_probe - EEH probe on the given device
+ * @dn: OF node
+ * @flag: Unused
+ *
+ * When EEH module is installed during system boot, all PCI devices
+ * are checked one by one to see if it supports EEH. The function
+ * is introduced for the purpose.
+ */
+static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
+{
+	struct eeh_dev *edev;
+	struct eeh_pe pe;
+	const u32 *class_code, *vendor_id, *device_id;
+	const u32 *regs;
+	int enable = 0;
+	int ret;
+
+	/* Retrieve OF node and eeh device */
+	edev = of_node_to_eeh_dev(dn);
+	if (!of_device_is_available(dn))
+		return NULL;
+
+	/* Retrieve class/vendor/device IDs */
+	class_code = of_get_property(dn, "class-code", NULL);
+	vendor_id  = of_get_property(dn, "vendor-id", NULL);
+	device_id  = of_get_property(dn, "device-id", NULL);
+
+	/* Skip for bad OF node or PCI-ISA bridge */
+	if (!class_code || !vendor_id || !device_id)
+		return NULL;
+	if (dn->type && !strcmp(dn->type, "isa"))
+		return NULL;
+
+	/* Update class code and mode of eeh device */
+	edev->class_code = *class_code;
+	edev->mode = 0;
+
+	/* Retrieve the device address */
+	regs = of_get_property(dn, "reg", NULL);
+	if (!regs) {
+		pr_warning("%s: OF node property %s::reg not found\n",
+			__func__, dn->full_name);
+		return NULL;
+	}
+
+	/* Initialize the fake PE */
+	memset(&pe, 0, sizeof(struct eeh_pe));
+	pe.phb = edev->phb;
+	pe.config_addr = regs[0];
+
+	/* Enable EEH on the device */
+	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
+	if (!ret) {
+		edev->config_addr = regs[0];
+		/* Retrieve PE address */
+		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+		pe.addr = edev->pe_config_addr;
+
+		/* Some older systems (Power4) allow the ibm,set-eeh-option
+		 * call to succeed even on nodes where EEH is not supported.
+		 * Verify support explicitly.
+		 */
+		ret = eeh_ops->get_state(&pe, NULL);
+		if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
+			enable = 1;
+
+		if (enable) {
+			eeh_subsystem_enabled = 1;
+			eeh_add_to_parent_pe(edev);
+
+			pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
+				__func__, dn->full_name, pe.phb->global_number,
+				pe.addr, pe.config_addr);
+		} else if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+			   (of_node_to_eeh_dev(dn->parent))->pe) {
+			/* This device doesn't support EEH, but it may have an
+			 * EEH parent, in which case we mark it as supported.
+			 */
+			edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
+			edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
+			eeh_add_to_parent_pe(edev);
+		}
+	}
+
+	/* Save memory bars */
+	eeh_save_bars(edev);
+
+	return NULL;
+}
+
+/**
  * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
- * @dn: device node
+ * @pe: EEH PE
  * @option: operation to be issued
  *
  * The function is used to control the EEH functionality globally.
  * Currently, following options are support according to PAPR:
  * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
  */
-static int pseries_eeh_set_option(struct device_node *dn, int option)
+static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
 {
 	int ret = 0;
-	struct eeh_dev *edev;
-	const u32 *reg;
 	int config_addr;
 
-	edev = of_node_to_eeh_dev(dn);
-
 	/*
 	 * When we're enabling or disabling EEH functioality on
 	 * the particular PE, the PE config address is possibly
@@ -159,15 +249,11 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
 	switch (option) {
 	case EEH_OPT_DISABLE:
 	case EEH_OPT_ENABLE:
-		reg = of_get_property(dn, "reg", NULL);
-		config_addr = reg[0];
-		break;
-
 	case EEH_OPT_THAW_MMIO:
 	case EEH_OPT_THAW_DMA:
-		config_addr = edev->config_addr;
-		if (edev->pe_config_addr)
-			config_addr = edev->pe_config_addr;
+		config_addr = pe->config_addr;
+		if (pe->addr)
+			config_addr = pe->addr;
 		break;
 
 	default:
@@ -177,15 +263,15 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
 	}
 
 	ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
-			config_addr, BUID_HI(edev->phb->buid),
-			BUID_LO(edev->phb->buid), option);
+			config_addr, BUID_HI(pe->phb->buid),
+			BUID_LO(pe->phb->buid), option);
 
 	return ret;
 }
 
 /**
  * pseries_eeh_get_pe_addr - Retrieve PE address
- * @dn: device node
+ * @pe: EEH PE
  *
  * Retrieve the assocated PE address. Actually, there're 2 RTAS
  * function calls dedicated for the purpose. We need implement
@@ -196,14 +282,11 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
  * It's notable that zero'ed return value means invalid PE config
  * address.
  */
-static int pseries_eeh_get_pe_addr(struct device_node *dn)
+static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
 {
-	struct eeh_dev *edev;
 	int ret = 0;
 	int rets[3];
 
-	edev = of_node_to_eeh_dev(dn);
-
 	if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
 		/*
 		 * First of all, we need to make sure there has one PE
@@ -211,18 +294,18 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 		 * meaningless.
 		 */
 		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-				edev->config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), 1);
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 1);
 		if (ret || (rets[0] == 0))
 			return 0;
 
 		/* Retrieve the associated PE config address */
 		ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-				edev->config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), 0);
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 0);
 		if (ret) {
-			pr_warning("%s: Failed to get PE address for %s\n",
-				__func__, dn->full_name);
+			pr_warning("%s: Failed to get address for PHB#%d-PE#%x\n",
+				__func__, pe->phb->global_number, pe->config_addr);
 			return 0;
 		}
 
@@ -231,11 +314,11 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 
 	if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
-				edev->config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), 0);
+				pe->config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), 0);
 		if (ret) {
-			pr_warning("%s: Failed to get PE address for %s\n",
-				__func__, dn->full_name);
+			pr_warning("%s: Failed to get address for PHB#%d-PE#%x\n",
+				__func__, pe->phb->global_number, pe->config_addr);
 			return 0;
 		}
 
@@ -247,7 +330,7 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 
 /**
  * pseries_eeh_get_state - Retrieve PE state
- * @dn: PE associated device node
+ * @pe: EEH PE
  * @state: return value
  *
  * Retrieve the state of the specified PE. On RTAS compliant
@@ -258,30 +341,28 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
  * RTAS calls for the purpose, we need to try the new one and back
  * to the old one if the new one couldn't work properly.
  */
-static int pseries_eeh_get_state(struct device_node *dn, int *state)
+static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	int ret;
 	int rets[4];
 	int result;
 
 	/* Figure out PE config address if possible */
-	edev = of_node_to_eeh_dev(dn);
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
 		/* Fake PE unavailable info */
 		rets[2] = 0;
 		ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else {
 		return EEH_STATE_NOT_SUPPORT;
 	}
@@ -333,34 +414,32 @@ static int pseries_eeh_get_state(struct device_node *dn, int *state)
 
 /**
  * pseries_eeh_reset - Reset the specified PE
- * @dn: PE associated device node
+ * @pe: EEH PE
  * @option: reset option
  *
  * Reset the specified PE
  */
-static int pseries_eeh_reset(struct device_node *dn, int option)
+static int pseries_eeh_reset(struct eeh_pe *pe, int option)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	int ret;
 
 	/* Figure out PE address */
-	edev = of_node_to_eeh_dev(dn);
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	/* Reset PE through RTAS call */
 	ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
-			config_addr, BUID_HI(edev->phb->buid),
-			BUID_LO(edev->phb->buid), option);
+			config_addr, BUID_HI(pe->phb->buid),
+			BUID_LO(pe->phb->buid), option);
 
 	/* If fundamental-reset not supported, try hot-reset */
 	if (option == EEH_RESET_FUNDAMENTAL &&
 	    ret == -8) {
 		ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid), EEH_RESET_HOT);
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid), EEH_RESET_HOT);
 	}
 
 	return ret;
@@ -368,13 +447,13 @@ static int pseries_eeh_reset(struct device_node *dn, int option)
 
 /**
  * pseries_eeh_wait_state - Wait for PE state
- * @dn: PE associated device node
+ * @pe: EEH PE
  * @max_wait: maximal period in microsecond
  *
  * Wait for the state of associated PE. It might take some time
  * to retrieve the PE's state.
  */
-static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
+static int pseries_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 {
 	int ret;
 	int mwait;
@@ -391,7 +470,7 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
 #define EEH_STATE_MAX_WAIT_TIME	(300 * 1000)
 
 	while (1) {
-		ret = pseries_eeh_get_state(dn, &mwait);
+		ret = pseries_eeh_get_state(pe, &mwait);
 
 		/*
 		 * If the PE's state is temporarily unavailable,
@@ -426,7 +505,7 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
 
 /**
  * pseries_eeh_get_log - Retrieve error log
- * @dn: device node
+ * @pe: EEH PE
  * @severity: temporary or permanent error log
  * @drv_log: driver log to be combined with retrieved error log
  * @len: length of driver log
@@ -435,24 +514,22 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
  * Actually, the error will be retrieved through the dedicated
  * RTAS call.
  */
-static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len)
+static int pseries_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	unsigned long flags;
 	int ret;
 
-	edev = of_node_to_eeh_dev(dn);
 	spin_lock_irqsave(&slot_errbuf_lock, flags);
 	memset(slot_errbuf, 0, eeh_error_buf_size);
 
 	/* Figure out the PE address */
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
-			BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid),
+			BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid),
 			virt_to_phys(drv_log), len,
 			virt_to_phys(slot_errbuf), eeh_error_buf_size,
 			severity);
@@ -465,40 +542,38 @@ static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_l
 
 /**
  * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE
- * @dn: PE associated device node
+ * @pe: EEH PE
  *
  * The function will be called to reconfigure the bridges included
  * in the specified PE so that the mulfunctional PE would be recovered
  * again.
  */
-static int pseries_eeh_configure_bridge(struct device_node *dn)
+static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
 {
-	struct eeh_dev *edev;
 	int config_addr;
 	int ret;
 
 	/* Figure out the PE address */
-	edev = of_node_to_eeh_dev(dn);
-	config_addr = edev->config_addr;
-	if (edev->pe_config_addr)
-		config_addr = edev->pe_config_addr;
+	config_addr = pe->config_addr;
+	if (pe->addr)
+		config_addr = pe->addr;
 
 	/* Use new configure-pe function, if supported */
 	if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
 		ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
-				config_addr, BUID_HI(edev->phb->buid),
-				BUID_LO(edev->phb->buid));
+				config_addr, BUID_HI(pe->phb->buid),
+				BUID_LO(pe->phb->buid));
 	} else {
 		return -EFAULT;
 	}
 
 	if (ret)
-		pr_warning("%s: Unable to configure bridge %d for %s\n",
-			__func__, ret, dn->full_name);
+		pr_warning("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+			__func__, pe->phb->global_number, pe->addr, ret);
 
 	return ret;
 }
@@ -542,6 +617,8 @@ static int pseries_eeh_write_config(struct device_node *dn, int where, int size,
 static struct eeh_ops pseries_eeh_ops = {
 	.name			= "pseries",
 	.init			= pseries_eeh_init,
+	.of_probe		= pseries_eeh_of_probe,
+	.dev_probe		= NULL,
 	.set_option		= pseries_eeh_set_option,
 	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,
@@ -559,7 +636,21 @@ static struct eeh_ops pseries_eeh_ops = {
  * EEH initialization on pseries platform. This function should be
  * called before any EEH related functions.
  */
-int __init eeh_pseries_init(void)
+static int __init eeh_pseries_init(void)
 {
-	return eeh_ops_register(&pseries_eeh_ops);
+	int ret = -EINVAL;
+
+	if (!machine_is(pseries))
+		return ret;
+
+	ret = eeh_ops_register(&pseries_eeh_ops);
+	if (!ret)
+		pr_info("EEH: pSeries platform initialized\n");
+	else
+		pr_info("EEH: pSeries platform initialization failure (%d)\n",
+			ret);
+
+	return ret;
 }
+
+early_initcall(eeh_pseries_init);
diff --git a/arch/powerpc/platforms/pseries/eeh_sysfs.c b/arch/powerpc/platforms/pseries/eeh_sysfs.c
index 243b3510d70f..d37708360f2e 100644
--- a/arch/powerpc/platforms/pseries/eeh_sysfs.c
+++ b/arch/powerpc/platforms/pseries/eeh_sysfs.c
@@ -53,9 +53,6 @@ static DEVICE_ATTR(_name, S_IRUGO, eeh_show_##_name, NULL);
 EEH_SHOW_ATTR(eeh_mode,            mode,            "0x%x");
 EEH_SHOW_ATTR(eeh_config_addr,     config_addr,     "0x%x");
 EEH_SHOW_ATTR(eeh_pe_config_addr,  pe_config_addr,  "0x%x");
-EEH_SHOW_ATTR(eeh_check_count,     check_count,     "%d"  );
-EEH_SHOW_ATTR(eeh_freeze_count,    freeze_count,    "%d"  );
-EEH_SHOW_ATTR(eeh_false_positives, false_positives, "%d"  );
 
 void eeh_sysfs_add_device(struct pci_dev *pdev)
 {
@@ -64,9 +61,6 @@ void eeh_sysfs_add_device(struct pci_dev *pdev)
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
-	rc += device_create_file(&pdev->dev, &dev_attr_eeh_check_count);
-	rc += device_create_file(&pdev->dev, &dev_attr_eeh_false_positives);
-	rc += device_create_file(&pdev->dev, &dev_attr_eeh_freeze_count);
 
 	if (rc)
 		printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
@@ -77,8 +71,5 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev)
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
-	device_remove_file(&pdev->dev, &dev_attr_eeh_check_count);
-	device_remove_file(&pdev->dev, &dev_attr_eeh_false_positives);
-	device_remove_file(&pdev->dev, &dev_attr_eeh_freeze_count);
 }
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index bca220f2873c..6153eea27ce7 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
+#include <linux/memblock.h>
 #include <linux/spinlock.h>
 #include <linux/sched.h>	/* for show_stack */
 #include <linux/string.h>
@@ -41,7 +42,6 @@
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
-#include <asm/abs_addr.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/firmware.h>
 #include <asm/tce.h>
@@ -99,7 +99,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 
 	while (npages--) {
 		/* can't move this out since we might cross MEMBLOCK boundary */
-		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+		rpn = __pa(uaddr) >> TCE_SHIFT;
 		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 
 		uaddr += TCE_PAGE_SIZE;
@@ -148,7 +148,7 @@ static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	int ret = 0;
 	long tcenum_start = tcenum, npages_start = npages;
 
-	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+	rpn = __pa(uaddr) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
@@ -217,7 +217,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		__get_cpu_var(tce_page) = tcep;
 	}
 
-	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+	rpn = __pa(uaddr) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
@@ -237,7 +237,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 
 		rc = plpar_tce_put_indirect((u64)tbl->it_index,
 					    (u64)tcenum << 12,
-					    (u64)virt_to_abs(tcep),
+					    (u64)__pa(tcep),
 					    limit);
 
 		npages -= limit;
@@ -441,7 +441,7 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
 
 		rc = plpar_tce_put_indirect(liobn,
 					    dma_offset,
-					    (u64)virt_to_abs(tcep),
+					    (u64)__pa(tcep),
 					    limit);
 
 		num_tce -= limit;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 5f3ef876ded2..0da39fed355a 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -31,7 +31,6 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/machdep.h>
-#include <asm/abs_addr.h>
 #include <asm/mmu_context.h>
 #include <asm/iommu.h>
 #include <asm/tlbflush.h>
@@ -108,9 +107,9 @@ void vpa_init(int cpu)
 }
 
 static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
- 			      unsigned long va, unsigned long pa,
- 			      unsigned long rflags, unsigned long vflags,
-			      int psize, int ssize)
+				     unsigned long vpn, unsigned long pa,
+				     unsigned long rflags, unsigned long vflags,
+				     int psize, int ssize)
 {
 	unsigned long lpar_rc;
 	unsigned long flags;
@@ -118,11 +117,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	unsigned long hpte_v, hpte_r;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
-			 "rflags=%lx, vflags=%lx, psize=%d)\n",
-			 hpte_group, va, pa, rflags, vflags, psize);
+		pr_devel("hpte_insert(group=%lx, vpn=%016lx, "
+			 "pa=%016lx, rflags=%lx, vflags=%lx, psize=%d)\n",
+			 hpte_group, vpn,  pa, rflags, vflags, psize);
 
-	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_v = hpte_encode_v(vpn, psize, ssize) | vflags | HPTE_V_VALID;
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
 	if (!(vflags & HPTE_V_BOLTED))
@@ -227,22 +226,6 @@ static void pSeries_lpar_hptab_clear(void)
 }
 
 /*
- * This computes the AVPN and B fields of the first dword of a HPTE,
- * for use when we want to match an existing PTE.  The bottom 7 bits
- * of the returned value are zero.
- */
-static inline unsigned long hpte_encode_avpn(unsigned long va, int psize,
-					     int ssize)
-{
-	unsigned long v;
-
-	v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
-	v <<= HPTE_V_AVPN_SHIFT;
-	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
-	return v;
-}
-
-/*
  * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and
  * the low 3 bits of flags happen to line up.  So no transform is needed.
  * We can probably optimize here and assume the high bits of newpp are
@@ -250,14 +233,14 @@ static inline unsigned long hpte_encode_avpn(unsigned long va, int psize,
  */
 static long pSeries_lpar_hpte_updatepp(unsigned long slot,
 				       unsigned long newpp,
-				       unsigned long va,
+				       unsigned long vpn,
 				       int psize, int ssize, int local)
 {
 	unsigned long lpar_rc;
 	unsigned long flags = (newpp & 7) | H_AVPN;
 	unsigned long want_v;
 
-	want_v = hpte_encode_avpn(va, psize, ssize);
+	want_v = hpte_encode_avpn(vpn, psize, ssize);
 
 	pr_devel("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
 		 want_v, slot, flags, psize);
@@ -295,15 +278,15 @@ static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot)
 	return dword0;
 }
 
-static long pSeries_lpar_hpte_find(unsigned long va, int psize, int ssize)
+static long pSeries_lpar_hpte_find(unsigned long vpn, int psize, int ssize)
 {
 	unsigned long hash;
 	unsigned long i;
 	long slot;
 	unsigned long want_v, hpte_v;
 
-	hash = hpt_hash(va, mmu_psize_defs[psize].shift, ssize);
-	want_v = hpte_encode_avpn(va, psize, ssize);
+	hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize);
+	want_v = hpte_encode_avpn(vpn, psize, ssize);
 
 	/* Bolted entries are always in the primary group */
 	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -323,12 +306,13 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
 					     unsigned long ea,
 					     int psize, int ssize)
 {
-	unsigned long lpar_rc, slot, vsid, va, flags;
+	unsigned long vpn;
+	unsigned long lpar_rc, slot, vsid, flags;
 
 	vsid = get_kernel_vsid(ea, ssize);
-	va = hpt_va(ea, vsid, ssize);
+	vpn = hpt_vpn(ea, vsid, ssize);
 
-	slot = pSeries_lpar_hpte_find(va, psize, ssize);
+	slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
 	BUG_ON(slot == -1);
 
 	flags = newpp & 7;
@@ -337,17 +321,17 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
 	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
-static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
+static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
 					 int psize, int ssize, int local)
 {
 	unsigned long want_v;
 	unsigned long lpar_rc;
 	unsigned long dummy1, dummy2;
 
-	pr_devel("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
-		 slot, va, psize, local);
+	pr_devel("    inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n",
+		 slot, vpn, psize, local);
 
-	want_v = hpte_encode_avpn(va, psize, ssize);
+	want_v = hpte_encode_avpn(vpn, psize, ssize);
 	lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v, &dummy1, &dummy2);
 	if (lpar_rc == H_NOT_FOUND)
 		return;
@@ -358,15 +342,16 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 static void pSeries_lpar_hpte_removebolted(unsigned long ea,
 					   int psize, int ssize)
 {
-	unsigned long slot, vsid, va;
+	unsigned long vpn;
+	unsigned long slot, vsid;
 
 	vsid = get_kernel_vsid(ea, ssize);
-	va = hpt_va(ea, vsid, ssize);
+	vpn = hpt_vpn(ea, vsid, ssize);
 
-	slot = pSeries_lpar_hpte_find(va, psize, ssize);
+	slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
 	BUG_ON(slot == -1);
 
-	pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
+	pSeries_lpar_hpte_invalidate(slot, vpn, psize, ssize, 0);
 }
 
 /* Flag bits for H_BULK_REMOVE */
@@ -382,12 +367,12 @@ static void pSeries_lpar_hpte_removebolted(unsigned long ea,
  */
 static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
 {
+	unsigned long vpn;
 	unsigned long i, pix, rc;
 	unsigned long flags = 0;
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
 	int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
 	unsigned long param[9];
-	unsigned long va;
 	unsigned long hash, index, shift, hidx, slot;
 	real_pte_t pte;
 	int psize, ssize;
@@ -399,21 +384,21 @@ static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
 	ssize = batch->ssize;
 	pix = 0;
 	for (i = 0; i < number; i++) {
-		va = batch->vaddr[i];
+		vpn = batch->vpn[i];
 		pte = batch->pte[i];
-		pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
-			hash = hpt_hash(va, shift, ssize);
+		pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
+			hash = hpt_hash(vpn, shift, ssize);
 			hidx = __rpte_to_hidx(pte, index);
 			if (hidx & _PTEIDX_SECONDARY)
 				hash = ~hash;
 			slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 			slot += hidx & _PTEIDX_GROUP_IX;
 			if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
-				pSeries_lpar_hpte_invalidate(slot, va, psize,
+				pSeries_lpar_hpte_invalidate(slot, vpn, psize,
 							     ssize, local);
 			} else {
 				param[pix] = HBR_REQUEST | HBR_AVPN | slot;
-				param[pix+1] = hpte_encode_avpn(va, psize,
+				param[pix+1] = hpte_encode_avpn(vpn, psize,
 								ssize);
 				pix += 2;
 				if (pix == 8) {
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 109fdb75578d..d19f4977c834 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -210,6 +210,7 @@ static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total)
 static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 {
 	struct device_node *dn;
+	struct eeh_dev *edev;
 
 	/* Found our PE and assume 8 at that point. */
 
@@ -217,7 +218,10 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 	if (!dn)
 		return NULL;
 
-	dn = eeh_find_device_pe(dn);
+	/* Get the top level device in the PE */
+	edev = of_node_to_eeh_dev(dn);
+	edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
+	dn = eeh_dev_to_of_node(edev);
 	if (!dn)
 		return NULL;
 
@@ -387,12 +391,13 @@ static int check_msix_entries(struct pci_dev *pdev)
 	return 0;
 }
 
-static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
 {
 	struct pci_dn *pdn;
 	int hwirq, virq, i, rc;
 	struct msi_desc *entry;
 	struct msi_msg msg;
+	int nvec = nvec_in;
 
 	pdn = get_pdn(pdev);
 	if (!pdn)
@@ -402,10 +407,23 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		return -EINVAL;
 
 	/*
+	 * Firmware currently refuse any non power of two allocation
+	 * so we round up if the quota will allow it.
+	 */
+	if (type == PCI_CAP_ID_MSIX) {
+		int m = roundup_pow_of_two(nvec);
+		int quota = msi_quota_for_device(pdev, m);
+
+		if (quota >= m)
+			nvec = m;
+	}
+
+	/*
 	 * Try the new more explicit firmware interface, if that fails fall
 	 * back to the old interface. The old interface is known to never
 	 * return MSI-Xs.
 	 */
+again:
 	if (type == PCI_CAP_ID_MSI) {
 		rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
 
@@ -417,6 +435,10 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec);
 
 	if (rc != nvec) {
+		if (nvec != nvec_in) {
+			nvec = nvec_in;
+			goto again;
+		}
 		pr_debug("rtas_msi: rtas_change_msi() failed\n");
 		return rc;
 	}
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 2c6ded29f73d..56b864d777ee 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -73,7 +73,7 @@ void __init pSeries_final_fixup(void)
 {
 	pSeries_request_regions();
 
-	pci_addr_cache_build();
+	eeh_addr_cache_build();
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 3ccebc83dc02..261a577a3dd2 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -65,27 +65,43 @@ pcibios_find_pci_bus(struct device_node *dn)
 EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
 
 /**
- * pcibios_remove_pci_devices - remove all devices under this bus
+ * __pcibios_remove_pci_devices - remove all devices under this bus
+ * @bus: the indicated PCI bus
+ * @purge_pe: destroy the PE on removal of PCI devices
  *
  * Remove all of the PCI devices under this bus both from the
  * linux pci device tree, and from the powerpc EEH address cache.
+ * By default, the corresponding PE will be destroied during the
+ * normal PCI hotplug path. For PCI hotplug during EEH recovery,
+ * the corresponding PE won't be destroied and deallocated.
  */
-void pcibios_remove_pci_devices(struct pci_bus *bus)
+void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
 {
- 	struct pci_dev *dev, *tmp;
+	struct pci_dev *dev, *tmp;
 	struct pci_bus *child_bus;
 
 	/* First go down child busses */
 	list_for_each_entry(child_bus, &bus->children, node)
-		pcibios_remove_pci_devices(child_bus);
+		__pcibios_remove_pci_devices(child_bus, purge_pe);
 
 	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
-		 pci_domain_nr(bus),  bus->number);
+		pci_domain_nr(bus),  bus->number);
 	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
 		pr_debug("     * Removing %s...\n", pci_name(dev));
-		eeh_remove_bus_device(dev);
- 		pci_stop_and_remove_bus_device(dev);
- 	}
+		eeh_remove_bus_device(dev, purge_pe);
+		pci_stop_and_remove_bus_device(dev);
+	}
+}
+
+/**
+ * pcibios_remove_pci_devices - remove all devices under this bus
+ *
+ * Remove all of the PCI devices under this bus both from the
+ * linux pci device tree, and from the powerpc EEH address cache.
+ */
+void pcibios_remove_pci_devices(struct pci_bus *bus)
+{
+	__pcibios_remove_pci_devices(bus, 1);
 }
 EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
 
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 51ecac920dd8..e3cb7ae61658 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -388,10 +388,8 @@ static void __init pSeries_setup_arch(void)
 
 	/* Find and initialize PCI host bridges */
 	init_pci_config_tokens();
-	eeh_pseries_init();
 	find_and_init_phbs();
 	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
-	eeh_init();
 
 	pSeries_nvram_init();
 
@@ -416,16 +414,20 @@ static int __init pSeries_init_panel(void)
 }
 machine_arch_initcall(pseries, pSeries_init_panel);
 
-static int pseries_set_dabr(unsigned long dabr)
+static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx)
 {
 	return plpar_hcall_norets(H_SET_DABR, dabr);
 }
 
-static int pseries_set_xdabr(unsigned long dabr)
+static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
 {
-	/* We want to catch accesses from kernel and userspace */
-	return plpar_hcall_norets(H_SET_XDABR, dabr,
-			H_DABRX_KERNEL | H_DABRX_USER);
+	/* Have to set at least one bit in the DABRX according to PAPR */
+	if (dabrx == 0 && dabr == 0)
+		dabrx = DABRX_USER;
+	/* PAPR says we can only set kernel and user bits */
+	dabrx &= DABRX_KERNEL | DABRX_USER;
+
+	return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
 }
 
 #define CMO_CHARACTERISTICS_TOKEN 44
@@ -529,10 +531,10 @@ static void __init pSeries_init_early(void)
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		hvc_vio_init_early();
 #endif
-	if (firmware_has_feature(FW_FEATURE_DABR))
-		ppc_md.set_dabr = pseries_set_dabr;
-	else if (firmware_has_feature(FW_FEATURE_XDABR))
+	if (firmware_has_feature(FW_FEATURE_XDABR))
 		ppc_md.set_dabr = pseries_set_xdabr;
+	else if (firmware_has_feature(FW_FEATURE_DABR))
+		ppc_md.set_dabr = pseries_set_dabr;
 
 	pSeries_cmo_feature_init();
 	iommu_init_early_pSeries();
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 1bd7ecb24620..a57600b3a4e3 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
 obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
-obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o fsl_mpic_err.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 4f2680f431b5..bd968a43a48b 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -43,7 +43,6 @@
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
-#include <asm/abs_addr.h>
 #include <asm/cacheflush.h>
 #include <asm/ppc-pci.h>
 
@@ -74,11 +73,16 @@ static int dart_is_u4;
 
 #define DBG(...)
 
+static DEFINE_SPINLOCK(invalidate_lock);
+
 static inline void dart_tlb_invalidate_all(void)
 {
 	unsigned long l = 0;
 	unsigned int reg, inv_bit;
 	unsigned long limit;
+	unsigned long flags;
+
+	spin_lock_irqsave(&invalidate_lock, flags);
 
 	DBG("dart: flush\n");
 
@@ -111,12 +115,17 @@ retry:
 			panic("DART: TLB did not flush after waiting a long "
 			      "time. Buggy U3 ?");
 	}
+
+	spin_unlock_irqrestore(&invalidate_lock, flags);
 }
 
 static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
 {
 	unsigned int reg;
 	unsigned int l, limit;
+	unsigned long flags;
+
+	spin_lock_irqsave(&invalidate_lock, flags);
 
 	reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
 		(bus_rpn & DART_CNTL_U4_IONE_MASK);
@@ -138,6 +147,8 @@ wait_more:
 			panic("DART: TLB did not flush after waiting a long "
 			      "time. Buggy U4 ?");
 	}
+
+	spin_unlock_irqrestore(&invalidate_lock, flags);
 }
 
 static void dart_flush(struct iommu_table *tbl)
@@ -167,7 +178,7 @@ static int dart_build(struct iommu_table *tbl, long index,
 	 */
 	l = npages;
 	while (l--) {
-		rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
+		rpn = __pa(uaddr) >> DART_PAGE_SHIFT;
 
 		*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
 
@@ -244,7 +255,7 @@ static int __init dart_init(struct device_node *dart_node)
 		panic("DART: Cannot map registers!");
 
 	/* Map in DART table */
-	dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
+	dart_vbase = ioremap(__pa(dart_tablebase), dart_tablesize);
 
 	/* Fill initial table */
 	for (i = 0; i < dart_tablesize/4; i++)
@@ -463,7 +474,7 @@ void __init alloc_dart_table(void)
 	 * will blow up an entire large page anyway in the kernel mapping
 	 */
 	dart_tablebase = (unsigned long)
-		abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+		__va(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
 
 	printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
 }
diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
index 68ac3aacb191..d131c8a1cb15 100644
--- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
+++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
@@ -193,6 +193,16 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = {
 	{
 		.compatible = "fsl,mpc8548-l2-cache-controller",
 	},
+	{	.compatible = "fsl,mpc8544-l2-cache-controller",},
+	{	.compatible = "fsl,mpc8572-l2-cache-controller",},
+	{	.compatible = "fsl,mpc8536-l2-cache-controller",},
+	{	.compatible = "fsl,p1021-l2-cache-controller",},
+	{	.compatible = "fsl,p1012-l2-cache-controller",},
+	{	.compatible = "fsl,p1025-l2-cache-controller",},
+	{	.compatible = "fsl,p1016-l2-cache-controller",},
+	{	.compatible = "fsl,p1024-l2-cache-controller",},
+	{	.compatible = "fsl,p1015-l2-cache-controller",},
+	{	.compatible = "fsl,p1010-l2-cache-controller",},
 	{},
 };
 
diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c
index b31f19f61031..097cc9d2585b 100644
--- a/arch/powerpc/sysdev/fsl_ifc.c
+++ b/arch/powerpc/sysdev/fsl_ifc.c
@@ -244,12 +244,6 @@ static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
 	/* get the nand machine irq */
 	fsl_ifc_ctrl_dev->nand_irq =
 			irq_of_parse_and_map(dev->dev.of_node, 1);
-	if (fsl_ifc_ctrl_dev->nand_irq == NO_IRQ) {
-		dev_err(&dev->dev, "failed to get irq resource "
-						"for NAND Machine\n");
-		ret = -ENODEV;
-		goto err;
-	}
 
 	fsl_ifc_ctrl_dev->dev = &dev->dev;
 
@@ -267,12 +261,14 @@ static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
 		goto err_irq;
 	}
 
-	ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq, 0,
-			  "fsl-ifc-nand", fsl_ifc_ctrl_dev);
-	if (ret != 0) {
-		dev_err(&dev->dev, "failed to install irq (%d)\n",
-			fsl_ifc_ctrl_dev->nand_irq);
-		goto err_nandirq;
+	if (fsl_ifc_ctrl_dev->nand_irq) {
+		ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq,
+				0, "fsl-ifc-nand", fsl_ifc_ctrl_dev);
+		if (ret != 0) {
+			dev_err(&dev->dev, "failed to install irq (%d)\n",
+				fsl_ifc_ctrl_dev->nand_irq);
+			goto err_nandirq;
+		}
 	}
 
 	return 0;
diff --git a/arch/powerpc/sysdev/fsl_mpic_err.c b/arch/powerpc/sysdev/fsl_mpic_err.c
new file mode 100644
index 000000000000..b83f32562a37
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_mpic_err.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Varun Sethi <varun.sethi@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpic.h>
+
+#include "mpic.h"
+
+#define MPIC_ERR_INT_BASE	0x3900
+#define MPIC_ERR_INT_EISR	0x0000
+#define MPIC_ERR_INT_EIMR	0x0010
+
+static inline u32 mpic_fsl_err_read(u32 __iomem *base, unsigned int err_reg)
+{
+	return in_be32(base + (err_reg >> 2));
+}
+
+static inline void mpic_fsl_err_write(u32 __iomem *base, u32 value)
+{
+	out_be32(base + (MPIC_ERR_INT_EIMR >> 2), value);
+}
+
+static void fsl_mpic_mask_err(struct irq_data *d)
+{
+	u32 eimr;
+	struct mpic *mpic = irq_data_get_irq_chip_data(d);
+	unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
+
+	eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+	eimr |= (1 << (31 - src));
+	mpic_fsl_err_write(mpic->err_regs, eimr);
+}
+
+static void fsl_mpic_unmask_err(struct irq_data *d)
+{
+	u32 eimr;
+	struct mpic *mpic = irq_data_get_irq_chip_data(d);
+	unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
+
+	eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+	eimr &= ~(1 << (31 - src));
+	mpic_fsl_err_write(mpic->err_regs, eimr);
+}
+
+static struct irq_chip fsl_mpic_err_chip = {
+	.irq_disable	= fsl_mpic_mask_err,
+	.irq_mask	= fsl_mpic_mask_err,
+	.irq_unmask	= fsl_mpic_unmask_err,
+};
+
+int mpic_setup_error_int(struct mpic *mpic, int intvec)
+{
+	int i;
+
+	mpic->err_regs = ioremap(mpic->paddr + MPIC_ERR_INT_BASE, 0x1000);
+	if (!mpic->err_regs) {
+		pr_err("could not map mpic error registers\n");
+		return -ENOMEM;
+	}
+	mpic->hc_err = fsl_mpic_err_chip;
+	mpic->hc_err.name = mpic->name;
+	mpic->flags |= MPIC_FSL_HAS_EIMR;
+	/* allocate interrupt vectors for error interrupts */
+	for (i = MPIC_MAX_ERR - 1; i >= 0; i--)
+		mpic->err_int_vecs[i] = --intvec;
+
+	return 0;
+}
+
+int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t  hw)
+{
+	if ((mpic->flags & MPIC_FSL_HAS_EIMR) &&
+	    (hw >= mpic->err_int_vecs[0] &&
+	     hw <= mpic->err_int_vecs[MPIC_MAX_ERR - 1])) {
+		WARN_ON(mpic->flags & MPIC_SECONDARY);
+
+		pr_debug("mpic: mapping as Error Interrupt\n");
+		irq_set_chip_data(virq, mpic);
+		irq_set_chip_and_handler(virq, &mpic->hc_err,
+					 handle_level_irq);
+		return 1;
+	}
+
+	return 0;
+}
+
+static irqreturn_t fsl_error_int_handler(int irq, void *data)
+{
+	struct mpic *mpic = (struct mpic *) data;
+	u32 eisr, eimr;
+	int errint;
+	unsigned int cascade_irq;
+
+	eisr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EISR);
+	eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+
+	if (!(eisr & ~eimr))
+		return IRQ_NONE;
+
+	while (eisr) {
+		errint = __builtin_clz(eisr);
+		cascade_irq = irq_linear_revmap(mpic->irqhost,
+				 mpic->err_int_vecs[errint]);
+		WARN_ON(cascade_irq == NO_IRQ);
+		if (cascade_irq != NO_IRQ) {
+			generic_handle_irq(cascade_irq);
+		} else {
+			eimr |=  1 << (31 - errint);
+			mpic_fsl_err_write(mpic->err_regs, eimr);
+		}
+		eisr &= ~(1 << (31 - errint));
+	}
+
+	return IRQ_HANDLED;
+}
+
+void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
+{
+	unsigned int virq;
+	int ret;
+
+	virq = irq_create_mapping(mpic->irqhost, irqnum);
+	if (virq == NO_IRQ) {
+		pr_err("Error interrupt setup failed\n");
+		return;
+	}
+
+	/* Mask all error interrupts */
+	mpic_fsl_err_write(mpic->err_regs, ~0);
+
+	ret = request_irq(virq, fsl_error_int_handler, IRQF_NO_THREAD,
+		    "mpic-error-int", mpic);
+	if (ret)
+		pr_err("Failed to register error interrupt handler\n");
+}
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 6e097de00e09..51ffafae561e 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -368,7 +368,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 	int err, i, j, irq_index, count;
 	int rc;
 	const u32 *p;
-	struct fsl_msi_feature *features;
+	const struct fsl_msi_feature *features;
 	int len;
 	u32 offset;
 	static const u32 all_avail[] = { 0, NR_MSI_IRQS };
@@ -502,15 +502,15 @@ static const struct fsl_msi_feature vmpic_msi_feature = {
 static const struct of_device_id fsl_of_msi_ids[] = {
 	{
 		.compatible = "fsl,mpic-msi",
-		.data = (void *)&mpic_msi_feature,
+		.data = &mpic_msi_feature,
 	},
 	{
 		.compatible = "fsl,ipic-msi",
-		.data = (void *)&ipic_msi_feature,
+		.data = &ipic_msi_feature,
 	},
 	{
 		.compatible = "fsl,vmpic-msi",
-		.data = (void *)&vmpic_msi_feature,
+		.data = &vmpic_msi_feature,
 	},
 	{}
 };
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index a7b2a600d0a4..ffb93ae9379b 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -38,15 +38,15 @@ static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
 
 static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
 {
-	u8 progif;
+	u8 hdr_type;
 
 	/* if we aren't a PCIe don't bother */
 	if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
 		return;
 
 	/* if we aren't in host mode don't bother */
-	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
-	if (progif & 0x1)
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
+	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
 		return;
 
 	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
@@ -143,18 +143,20 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		 (u64)rsrc->start, (u64)resource_size(rsrc));
 
-	if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) {
-		win_idx = 2;
-		start_idx = 0;
-		end_idx = 3;
-	}
-
 	pci = ioremap(rsrc->start, resource_size(rsrc));
 	if (!pci) {
 	    dev_err(hose->parent, "Unable to map ATMU registers\n");
 	    return;
 	}
 
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
+			win_idx = 2;
+			start_idx = 0;
+			end_idx = 3;
+		}
+	}
+
 	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
@@ -425,7 +427,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	struct pci_controller *hose;
 	struct resource rsrc;
 	const int *bus_range;
-	u8 progif;
+	u8 hdr_type, progif;
 
 	if (!of_device_is_available(dev)) {
 		pr_warning("%s: disabled\n", dev->full_name);
@@ -457,15 +459,17 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
 		PPC_INDIRECT_TYPE_BIG_ENDIAN);
 
-	early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
-	if ((progif & 1) == 1) {
-		/* unmap cfg_data & cfg_addr separately if not on same page */
-		if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
-		    ((unsigned long)hose->cfg_addr & PAGE_MASK))
-			iounmap(hose->cfg_data);
-		iounmap(hose->cfg_addr);
-		pcibios_free_controller(hose);
-		return 0;
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		/* For PCIE read HEADER_TYPE to identify controler mode */
+		early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
+		if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+			goto no_bridge;
+
+	} else {
+		/* For PCI read PROG to identify controller mode */
+		early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
+		if ((progif & 1) == 1)
+			goto no_bridge;
 	}
 
 	setup_pci_cmd(hose);
@@ -494,6 +498,15 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	setup_pci_atmu(hose, &rsrc);
 
 	return 0;
+
+no_bridge:
+	/* unmap cfg_data & cfg_addr separately if not on same page */
+	if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
+	    ((unsigned long)hose->cfg_addr & PAGE_MASK))
+		iounmap(hose->cfg_data);
+	iounmap(hose->cfg_addr);
+	pcibios_free_controller(hose);
+	return -ENODEV;
 }
 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
@@ -818,6 +831,7 @@ static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,p1010-pcie", },
 	{ .compatible = "fsl,p1023-pcie", },
 	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
 	{ .compatible = "fsl,qoriq-pcie-v2.3", },
 	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{},
@@ -825,54 +839,80 @@ static const struct of_device_id pci_ids[] = {
 
 struct device_node *fsl_pci_primary;
 
-void __devinit fsl_pci_init(void)
+void fsl_pci_assign_primary(void)
 {
-	struct device_node *node;
-	struct pci_controller *hose;
-	dma_addr_t max = 0xffffffff;
+	struct device_node *np;
 
 	/* Callers can specify the primary bus using other means. */
-	if (!fsl_pci_primary) {
-		/* If a PCI host bridge contains an ISA node, it's primary. */
-		node = of_find_node_by_type(NULL, "isa");
-		while ((fsl_pci_primary = of_get_parent(node))) {
-			of_node_put(node);
-			node = fsl_pci_primary;
-
-			if (of_match_node(pci_ids, node))
-				break;
-		}
-	}
+	if (fsl_pci_primary)
+		return;
 
-	node = NULL;
-	for_each_node_by_type(node, "pci") {
-		if (of_match_node(pci_ids, node)) {
-			/*
-			 * If there's no PCI host bridge with ISA, arbitrarily
-			 * designate one as primary.  This can go away once
-			 * various bugs with primary-less systems are fixed.
-			 */
-			if (!fsl_pci_primary)
-				fsl_pci_primary = node;
+	/* If a PCI host bridge contains an ISA node, it's primary. */
+	np = of_find_node_by_type(NULL, "isa");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
 
-			fsl_add_bridge(node, fsl_pci_primary == node);
-			hose = pci_find_hose_for_OF_device(node);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
+		if (of_match_node(pci_ids, np) && of_device_is_available(np))
+			return;
 	}
 
-#ifdef CONFIG_SWIOTLB
 	/*
-	 * if we couldn't map all of DRAM via the dma windows
-	 * we need SWIOTLB to handle buffers located outside of
-	 * dma capable memory region
+	 * If there's no PCI host bridge with ISA, arbitrarily
+	 * designate one as primary.  This can go away once
+	 * various bugs with primary-less systems are fixed.
 	 */
-	if (memblock_end_of_DRAM() - 1 > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	for_each_matching_node(np, pci_ids) {
+		if (of_device_is_available(np)) {
+			fsl_pci_primary = np;
+			of_node_put(np);
+			return;
+		}
+	}
+}
+
+static int __devinit fsl_pci_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *node;
+#ifdef CONFIG_SWIOTLB
+	struct pci_controller *hose;
+#endif
+
+	node = pdev->dev.of_node;
+	ret = fsl_add_bridge(node, fsl_pci_primary == node);
+
+#ifdef CONFIG_SWIOTLB
+	if (ret == 0) {
+		hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
+
+		/*
+		 * if we couldn't map all of DRAM via the dma windows
+		 * we need SWIOTLB to handle buffers located outside of
+		 * dma capable memory region
+		 */
+		if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
+				hose->dma_window_size)
+			ppc_swiotlb_enable = 1;
 	}
 #endif
+
+	mpc85xx_pci_err_probe(pdev);
+
+	return 0;
+}
+
+static struct platform_driver fsl_pci_driver = {
+	.driver = {
+		.name = "fsl-pci",
+		.of_match_table = pci_ids,
+	},
+	.probe = fsl_pci_probe,
+};
+
+static int __init fsl_pci_init(void)
+{
+	return platform_driver_register(&fsl_pci_driver);
 }
+arch_initcall(fsl_pci_init);
 #endif
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index baa0fd18289f..d078537adece 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -16,6 +16,7 @@
 
 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
 #define PCIE_LTSSM_L0	0x16		/* L0 state */
+#define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
 #define PIWAR_EN		0x80000000	/* Enable */
 #define PIWAR_PF		0x20000000	/* prefetch */
 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
@@ -57,7 +58,9 @@ struct ccsr_pci {
 	__be32	pex_pme_mes_disr;	/* 0x.024 - PCIE PME and message disable register */
 	__be32	pex_pme_mes_ier;	/* 0x.028 - PCIE PME and message interrupt enable register */
 	__be32	pex_pmcr;		/* 0x.02c - PCIE power management command register */
-	u8	res3[3024];
+	u8	res3[3016];
+	__be32	block_rev1;	/* 0x.bf8 - PCIE Block Revision register 1 */
+	__be32	block_rev2;	/* 0x.bfc - PCIE Block Revision register 2 */
 
 /* PCI/PCI Express outbound window 0-4
  * Window 0 is the default window and is the only window enabled upon reset.
@@ -95,10 +98,19 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose);
 
 extern struct device_node *fsl_pci_primary;
 
-#ifdef CONFIG_FSL_PCI
-void fsl_pci_init(void);
+#ifdef CONFIG_PCI
+void fsl_pci_assign_primary(void);
 #else
-static inline void fsl_pci_init(void) {}
+static inline void fsl_pci_assign_primary(void) {}
+#endif
+
+#ifdef CONFIG_EDAC_MPC85XX
+int mpc85xx_pci_err_probe(struct platform_device *op);
+#else
+static inline int mpc85xx_pci_err_probe(struct platform_device *op)
+{
+	return -ENOTSUPP;
+}
 #endif
 
 #endif /* __POWERPC_FSL_PCI_H */
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index bfc6211e5422..9c6e535daad2 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -6,7 +6,7 @@
  *  with various broken implementations of this HW.
  *
  *  Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
- *  Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *  Copyright 2010-2012 Freescale Semiconductor, Inc.
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License.  See the file COPYING in the main directory of this archive
@@ -221,24 +221,24 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu
 	_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
 }
 
-static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+static inline unsigned int mpic_tm_offset(struct mpic *mpic, unsigned int tm)
 {
-	unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
-			      ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+	return (tm >> 2) * MPIC_TIMER_GROUP_STRIDE +
+	       (tm & 3) * MPIC_INFO(TIMER_STRIDE);
+}
 
-	if (tm >= 4)
-		offset += 0x1000 / 4;
+static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+{
+	unsigned int offset = mpic_tm_offset(mpic, tm) +
+			      MPIC_INFO(TIMER_VECTOR_PRI);
 
 	return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
 }
 
 static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
 {
-	unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
-			      ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
-
-	if (tm >= 4)
-		offset += 0x1000 / 4;
+	unsigned int offset = mpic_tm_offset(mpic, tm) +
+			      MPIC_INFO(TIMER_VECTOR_PRI);
 
 	_mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
 }
@@ -1026,6 +1026,9 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
 		return 0;
 	}
 
+	if (mpic_map_error_int(mpic, virq, hw))
+		return 0;
+
 	if (hw >= mpic->num_sources)
 		return -EINVAL;
 
@@ -1085,7 +1088,16 @@ static int mpic_host_xlate(struct irq_domain *h, struct device_node *ct,
 		 */
 		switch (intspec[2]) {
 		case 0:
-		case 1: /* no EISR/EIMR support for now, treat as shared IRQ */
+			break;
+		case 1:
+			if (!(mpic->flags & MPIC_FSL_HAS_EIMR))
+				break;
+
+			if (intspec[3] >= ARRAY_SIZE(mpic->err_int_vecs))
+				return -EINVAL;
+
+			*out_hwirq = mpic->err_int_vecs[intspec[3]];
+
 			break;
 		case 2:
 			if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs))
@@ -1301,6 +1313,42 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
 	mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
+	if (mpic->flags & MPIC_FSL) {
+		u32 brr1, version;
+		int ret;
+
+		/*
+		 * Yes, Freescale really did put global registers in the
+		 * magic per-cpu area -- and they don't even show up in the
+		 * non-magic per-cpu copies that this driver normally uses.
+		 */
+		mpic_map(mpic, mpic->paddr, &mpic->thiscpuregs,
+			 MPIC_CPU_THISBASE, 0x1000);
+
+		brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
+				MPIC_FSL_BRR1);
+		version = brr1 & MPIC_FSL_BRR1_VER;
+
+		/* Error interrupt mask register (EIMR) is required for
+		 * handling individual device error interrupts. EIMR
+		 * was added in MPIC version 4.1.
+		 *
+		 * Over here we reserve vector number space for error
+		 * interrupt vectors. This space is stolen from the
+		 * global vector number space, as in case of ipis
+		 * and timer interrupts.
+		 *
+		 * Available vector space = intvec_top - 12, where 12
+		 * is the number of vectors which have been consumed by
+		 * ipis and timer interrupts.
+		 */
+		if (version >= 0x401) {
+			ret = mpic_setup_error_int(mpic, intvec_top - 12);
+			if (ret)
+				return NULL;
+		}
+	}
+
 	/* Reset */
 
 	/* When using a device-node, reset requests are only honored if the MPIC
@@ -1440,6 +1488,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 void __init mpic_init(struct mpic *mpic)
 {
 	int i, cpu;
+	int num_timers = 4;
 
 	BUG_ON(mpic->num_sources == 0);
 
@@ -1448,15 +1497,34 @@ void __init mpic_init(struct mpic *mpic)
 	/* Set current processor priority to max */
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
 
+	if (mpic->flags & MPIC_FSL) {
+		u32 brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
+				      MPIC_FSL_BRR1);
+		u32 version = brr1 & MPIC_FSL_BRR1_VER;
+
+		/*
+		 * Timer group B is present at the latest in MPIC 3.1 (e.g.
+		 * mpc8536).  It is not present in MPIC 2.0 (e.g. mpc8544).
+		 * I don't know about the status of intermediate versions (or
+		 * whether they even exist).
+		 */
+		if (version >= 0x0301)
+			num_timers = 8;
+	}
+
+	/* FSL mpic error interrupt intialization */
+	if (mpic->flags & MPIC_FSL_HAS_EIMR)
+		mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
+
 	/* Initialize timers to our reserved vectors and mask them for now */
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < num_timers; i++) {
+		unsigned int offset = mpic_tm_offset(mpic, i);
+
 		mpic_write(mpic->tmregs,
-			   i * MPIC_INFO(TIMER_STRIDE) +
-			   MPIC_INFO(TIMER_DESTINATION),
+			   offset + MPIC_INFO(TIMER_DESTINATION),
 			   1 << hard_smp_processor_id());
 		mpic_write(mpic->tmregs,
-			   i * MPIC_INFO(TIMER_STRIDE) +
-			   MPIC_INFO(TIMER_VECTOR_PRI),
+			   offset + MPIC_INFO(TIMER_VECTOR_PRI),
 			   MPIC_VECPRI_MASK |
 			   (9 << MPIC_VECPRI_PRIORITY_SHIFT) |
 			   (mpic->timer_vecs[0] + i));
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index 13f3e8913a93..24bf07a63924 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -40,4 +40,26 @@ extern int mpic_set_affinity(struct irq_data *d,
 			     const struct cpumask *cpumask, bool force);
 extern void mpic_reset_core(int cpu);
 
+#ifdef CONFIG_FSL_SOC
+extern int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t  hw);
+extern void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum);
+extern int mpic_setup_error_int(struct mpic *mpic, int intvec);
+#else
+static inline int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t  hw)
+{
+	return 0;
+}
+
+
+static inline void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
+{
+	return;
+}
+
+static inline int mpic_setup_error_int(struct mpic *mpic, int intvec)
+{
+	return -1;
+}
+#endif
+
 #endif /* _POWERPC_SYSDEV_MPIC_H */
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 483d8fa72e8b..e961f8c4a8f0 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -14,6 +14,9 @@
 #include <linux/list.h>
 #include <linux/of_platform.h>
 #include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 14469cf9df68..df0fc5821469 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value)
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
 	int hw_cpu = get_hard_smp_processor_id(n_cpu);
-	long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	long rc;
+
+	/* Make sure all previous accesses are ordered before IPI sending */
+	mb();
+	rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
 	if (rc != H_SUCCESS) {
 		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
 			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index eab3492a45c5..3a56a639a92e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -17,6 +17,7 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/kallsyms.h>
+#include <linux/kmsg_dump.h>
 #include <linux/cpumask.h>
 #include <linux/export.h>
 #include <linux/sysrq.h>
@@ -59,6 +60,8 @@ static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
 static unsigned long xmon_taken = 1;
 static int xmon_owner;
 static int xmon_gate;
+#else
+#define xmon_owner 0
 #endif /* CONFIG_SMP */
 
 static unsigned long in_xmon __read_mostly = 0;
@@ -201,7 +204,13 @@ Commands:\n\
   di	dump instructions\n\
   df	dump float values\n\
   dd	dump double values\n\
-  dl    dump the kernel log buffer\n\
+  dl    dump the kernel log buffer\n"
+#ifdef CONFIG_PPC64
+  "\
+  dp[#]	dump paca for current cpu, or cpu #\n\
+  dpa	dump paca for all possible cpus\n"
+#endif
+  "\
   dr	dump stream of raw bytes\n\
   e	print exception information\n\
   f	flush cache\n\
@@ -739,7 +748,7 @@ static void insert_bpts(void)
 static void insert_cpu_bpts(void)
 {
 	if (dabr.enabled)
-		set_dabr(dabr.address | (dabr.enabled & 7));
+		set_dabr(dabr.address | (dabr.enabled & 7), DABRX_ALL);
 	if (iabr && cpu_has_feature(CPU_FTR_IABR))
 		mtspr(SPRN_IABR, iabr->address
 			 | (iabr->enabled & (BP_IABR|BP_IABR_TE)));
@@ -767,7 +776,7 @@ static void remove_bpts(void)
 
 static void remove_cpu_bpts(void)
 {
-	set_dabr(0);
+	set_dabr(0, 0);
 	if (cpu_has_feature(CPU_FTR_IABR))
 		mtspr(SPRN_IABR, 0);
 }
@@ -894,13 +903,13 @@ cmds(struct pt_regs *excp)
 #endif
 		default:
 			printf("Unrecognized command: ");
-		        do {
+			do {
 				if (' ' < cmd && cmd <= '~')
 					putchar(cmd);
 				else
 					printf("\\x%x", cmd);
 				cmd = inchar();
-		        } while (cmd != '\n'); 
+			} while (cmd != '\n');
 			printf(" (type ? for help)\n");
 			break;
 		}
@@ -1097,7 +1106,7 @@ static long check_bp_loc(unsigned long addr)
 	return 1;
 }
 
-static char *breakpoint_help_string = 
+static char *breakpoint_help_string =
     "Breakpoint command usage:\n"
     "b                show breakpoints\n"
     "b <addr> [cnt]   set breakpoint at given instr addr\n"
@@ -1193,7 +1202,7 @@ bpt_cmds(void)
 
 	default:
 		termch = cmd;
-	        cmd = skipbl();
+		cmd = skipbl();
 		if (cmd == '?') {
 			printf(breakpoint_help_string);
 			break;
@@ -1359,7 +1368,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
 				       sp + REGS_OFFSET);
 				break;
 			}
-                        printf("--- Exception: %lx %s at ", regs.trap,
+			printf("--- Exception: %lx %s at ", regs.trap,
 			       getvecname(TRAP(&regs)));
 			pc = regs.nip;
 			lr = regs.link;
@@ -1623,14 +1632,14 @@ static void super_regs(void)
 
 	cmd = skipbl();
 	if (cmd == '\n') {
-	        unsigned long sp, toc;
+		unsigned long sp, toc;
 		asm("mr %0,1" : "=r" (sp) :);
 		asm("mr %0,2" : "=r" (toc) :);
 
 		printf("msr  = "REG"  sprg0= "REG"\n",
 		       mfmsr(), mfspr(SPRN_SPRG0));
 		printf("pvr  = "REG"  sprg1= "REG"\n",
-		       mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); 
+		       mfspr(SPRN_PVR), mfspr(SPRN_SPRG1));
 		printf("dec  = "REG"  sprg2= "REG"\n",
 		       mfspr(SPRN_DEC), mfspr(SPRN_SPRG2));
 		printf("sp   = "REG"  sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3));
@@ -1783,7 +1792,7 @@ byterev(unsigned char *val, int size)
 static int brev;
 static int mnoread;
 
-static char *memex_help_string = 
+static char *memex_help_string =
     "Memory examine command usage:\n"
     "m [addr] [flags] examine/change memory\n"
     "  addr is optional.  will start where left off.\n"
@@ -1798,7 +1807,7 @@ static char *memex_help_string =
     "NOTE: flags are saved as defaults\n"
     "";
 
-static char *memex_subcmd_help_string = 
+static char *memex_subcmd_help_string =
     "Memory examine subcommands:\n"
     "  hexval   write this val to current location\n"
     "  'string' write chars from string to this location\n"
@@ -2008,6 +2017,95 @@ static void xmon_rawdump (unsigned long adrs, long ndump)
 	printf("\n");
 }
 
+#ifdef CONFIG_PPC64
+static void dump_one_paca(int cpu)
+{
+	struct paca_struct *p;
+
+	if (setjmp(bus_error_jmp) != 0) {
+		printf("*** Error dumping paca for cpu 0x%x!\n", cpu);
+		return;
+	}
+
+	catch_memory_errors = 1;
+	sync();
+
+	p = &paca[cpu];
+
+	printf("paca for cpu 0x%x @ %p:\n", cpu, p);
+
+	printf(" %-*s = %s\n", 16, "possible", cpu_possible(cpu) ? "yes" : "no");
+	printf(" %-*s = %s\n", 16, "present", cpu_present(cpu) ? "yes" : "no");
+	printf(" %-*s = %s\n", 16, "online", cpu_online(cpu) ? "yes" : "no");
+
+#define DUMP(paca, name, format) \
+	printf(" %-*s = %#-*"format"\t(0x%lx)\n", 16, #name, 18, paca->name, \
+		offsetof(struct paca_struct, name));
+
+	DUMP(p, lock_token, "x");
+	DUMP(p, paca_index, "x");
+	DUMP(p, kernel_toc, "lx");
+	DUMP(p, kernelbase, "lx");
+	DUMP(p, kernel_msr, "lx");
+#ifdef CONFIG_PPC_STD_MMU_64
+	DUMP(p, stab_real, "lx");
+	DUMP(p, stab_addr, "lx");
+#endif
+	DUMP(p, emergency_sp, "p");
+	DUMP(p, data_offset, "lx");
+	DUMP(p, hw_cpu_id, "x");
+	DUMP(p, cpu_start, "x");
+	DUMP(p, kexec_state, "x");
+	DUMP(p, __current, "p");
+	DUMP(p, kstack, "lx");
+	DUMP(p, stab_rr, "lx");
+	DUMP(p, saved_r1, "lx");
+	DUMP(p, trap_save, "x");
+	DUMP(p, soft_enabled, "x");
+	DUMP(p, irq_happened, "x");
+	DUMP(p, io_sync, "x");
+	DUMP(p, irq_work_pending, "x");
+	DUMP(p, nap_state_lost, "x");
+
+#undef DUMP
+
+	catch_memory_errors = 0;
+	sync();
+}
+
+static void dump_all_pacas(void)
+{
+	int cpu;
+
+	if (num_possible_cpus() == 0) {
+		printf("No possible cpus, use 'dp #' to dump individual cpus\n");
+		return;
+	}
+
+	for_each_possible_cpu(cpu)
+		dump_one_paca(cpu);
+}
+
+static void dump_pacas(void)
+{
+	unsigned long num;
+	int c;
+
+	c = inchar();
+	if (c == 'a') {
+		dump_all_pacas();
+		return;
+	}
+
+	termch = c;	/* Put c back, it wasn't 'a' */
+
+	if (scanhex(&num))
+		dump_one_paca(num);
+	else
+		dump_one_paca(xmon_owner);
+}
+#endif
+
 #define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
 			 || ('a' <= (c) && (c) <= 'f') \
 			 || ('A' <= (c) && (c) <= 'F'))
@@ -2017,6 +2115,14 @@ dump(void)
 	int c;
 
 	c = inchar();
+
+#ifdef CONFIG_PPC64
+	if (c == 'p') {
+		dump_pacas();
+		return;
+	}
+#endif
+
 	if ((isxdigit(c) && c != 'f' && c != 'd') || c == '\n')
 		termch = c;
 	scanhex((void *)&adrs);
@@ -2064,7 +2170,7 @@ prdump(unsigned long adrs, long ndump)
 		nr = mread(adrs, temp, r);
 		adrs += nr;
 		for (m = 0; m < r; ++m) {
-		        if ((m & (sizeof(long) - 1)) == 0 && m > 0)
+			if ((m & (sizeof(long) - 1)) == 0 && m > 0)
 				putchar(' ');
 			if (m < nr)
 				printf("%.2x", temp[m]);
@@ -2072,7 +2178,7 @@ prdump(unsigned long adrs, long ndump)
 				printf("%s", fault_chars[fault_type]);
 		}
 		for (; m < 16; ++m) {
-		        if ((m & (sizeof(long) - 1)) == 0)
+			if ((m & (sizeof(long) - 1)) == 0)
 				putchar(' ');
 			printf("  ");
 		}
@@ -2148,45 +2254,28 @@ print_address(unsigned long addr)
 void
 dump_log_buf(void)
 {
-        const unsigned long size = 128;
-        unsigned long end, addr;
-        unsigned char buf[size + 1];
-
-        addr = 0;
-        buf[size] = '\0';
-
-        if (setjmp(bus_error_jmp) != 0) {
-                printf("Unable to lookup symbol __log_buf!\n");
-                return;
-        }
-
-        catch_memory_errors = 1;
-        sync();
-        addr = kallsyms_lookup_name("__log_buf");
-
-        if (! addr)
-                printf("Symbol __log_buf not found!\n");
-        else {
-                end = addr + (1 << CONFIG_LOG_BUF_SHIFT);
-                while (addr < end) {
-                        if (! mread(addr, buf, size)) {
-                                printf("Can't read memory at address 0x%lx\n", addr);
-                                break;
-                        }
-
-                        printf("%s", buf);
-
-                        if (strlen(buf) < size)
-                                break;
-
-                        addr += size;
-                }
-        }
-
-        sync();
-        /* wait a little while to see if we get a machine check */
-        __delay(200);
-        catch_memory_errors = 0;
+	struct kmsg_dumper dumper = { .active = 1 };
+	unsigned char buf[128];
+	size_t len;
+
+	if (setjmp(bus_error_jmp) != 0) {
+		printf("Error dumping printk buffer!\n");
+		return;
+	}
+
+	catch_memory_errors = 1;
+	sync();
+
+	kmsg_dump_rewind_nolock(&dumper);
+	while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) {
+		buf[len] = '\0';
+		printf("%s", buf);
+	}
+
+	sync();
+	/* wait a little while to see if we get a machine check */
+	__delay(200);
+	catch_memory_errors = 0;
 }
 
 /*
diff --git a/arch/s390/Kbuild b/arch/s390/Kbuild
index 9858476fa0fe..cc45d25487b0 100644
--- a/arch/s390/Kbuild
+++ b/arch/s390/Kbuild
@@ -5,3 +5,4 @@ obj-$(CONFIG_CRYPTO_HW)		+= crypto/
 obj-$(CONFIG_S390_HYPFS_FS)	+= hypfs/
 obj-$(CONFIG_APPLDATA_BASE)	+= appldata/
 obj-$(CONFIG_MATHEMU)		+= math-emu/
+obj-y				+= net/
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 76de6b68487c..c8af429991d9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -49,10 +49,13 @@ config GENERIC_LOCKBREAK
 config PGSTE
 	def_bool y if KVM
 
-config VIRT_CPU_ACCOUNTING
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
-config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+config KEXEC
+	def_bool y
+
+config AUDIT_ARCH
 	def_bool y
 
 config S390
@@ -84,11 +87,15 @@ config S390
 	select HAVE_KERNEL_XZ
 	select HAVE_ARCH_MUTEX_CPU_RELAX
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
+	select HAVE_BPF_JIT if 64BIT && PACK_STACK
 	select ARCH_SAVE_PAGE_KEYS if HIBERNATION
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_CMPXCHG_LOCAL
+	select HAVE_CMPXCHG_DOUBLE
+	select HAVE_VIRT_CPU_ACCOUNTING
+	select VIRT_CPU_ACCOUNTING
 	select ARCH_DISCARD_MEMBLOCK
 	select BUILDTIME_EXTABLE_SORT
 	select ARCH_INLINE_SPIN_TRYLOCK
@@ -124,6 +131,7 @@ config S390
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_CLOCKEVENTS
 	select KTIME_SCALAR if 32BIT
+	select HAVE_ARCH_SECCOMP_FILTER
 
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
@@ -132,9 +140,79 @@ source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
 
-menu "Base setup"
+menu "Processor type and features"
+
+config HAVE_MARCH_Z900_FEATURES
+	def_bool n
+
+config HAVE_MARCH_Z990_FEATURES
+	def_bool n
+	select HAVE_MARCH_Z900_FEATURES
+
+config HAVE_MARCH_Z9_109_FEATURES
+	def_bool n
+	select HAVE_MARCH_Z990_FEATURES
+
+config HAVE_MARCH_Z10_FEATURES
+	def_bool n
+	select HAVE_MARCH_Z9_109_FEATURES
+
+config HAVE_MARCH_Z196_FEATURES
+	def_bool n
+	select HAVE_MARCH_Z10_FEATURES
+
+choice
+	prompt "Processor type"
+	default MARCH_G5
+
+config MARCH_G5
+	bool "System/390 model G5 and G6"
+	depends on !64BIT
+	help
+	  Select this to build a 31 bit kernel that works
+	  on all ESA/390 and z/Architecture machines.
 
-comment "Processor type and features"
+config MARCH_Z900
+	bool "IBM zSeries model z800 and z900"
+	select HAVE_MARCH_Z900_FEATURES if 64BIT
+	help
+	  Select this to enable optimizations for model z800/z900 (2064 and
+	  2066 series). This will enable some optimizations that are not
+	  available on older ESA/390 (31 Bit) only CPUs.
+
+config MARCH_Z990
+	bool "IBM zSeries model z890 and z990"
+	select HAVE_MARCH_Z990_FEATURES if 64BIT
+	help
+	  Select this to enable optimizations for model z890/z990 (2084 and
+	  2086 series). The kernel will be slightly faster but will not work
+	  on older machines.
+
+config MARCH_Z9_109
+	bool "IBM System z9"
+	select HAVE_MARCH_Z9_109_FEATURES if 64BIT
+	help
+	  Select this to enable optimizations for IBM System z9 (2094 and
+	  2096 series). The kernel will be slightly faster but will not work
+	  on older machines.
+
+config MARCH_Z10
+	bool "IBM System z10"
+	select HAVE_MARCH_Z10_FEATURES if 64BIT
+	help
+	  Select this to enable optimizations for IBM System z10 (2097 and
+	  2098 series). The kernel will be slightly faster but will not work
+	  on older machines.
+
+config MARCH_Z196
+	bool "IBM zEnterprise 114 and 196"
+	select HAVE_MARCH_Z196_FEATURES if 64BIT
+	help
+	  Select this to enable optimizations for IBM zEnterprise 114 and 196
+	  (2818 and 2817 series). The kernel will be slightly faster but will
+	  not work on older machines.
+
+endchoice
 
 config 64BIT
 	def_bool y
@@ -146,6 +224,24 @@ config 64BIT
 config 32BIT
 	def_bool y if !64BIT
 
+config COMPAT
+	def_bool y
+	prompt "Kernel support for 31 bit emulation"
+	depends on 64BIT
+	select COMPAT_BINFMT_ELF if BINFMT_ELF
+	select ARCH_WANT_OLD_COMPAT_IPC
+	help
+	  Select this option if you want to enable your system kernel to
+	  handle system-calls from ELF binaries for 31 bit ESA.  This option
+	  (and some other stuff like libraries and such) is needed for
+	  executing 31 bit applications.  It is safe to say "Y".
+
+config SYSVIPC_COMPAT
+	def_bool y if COMPAT && SYSVIPC
+
+config KEYS_COMPAT
+	def_bool y if COMPAT && KEYS
+
 config SMP
 	def_bool y
 	prompt "Symmetric multi-processing support"
@@ -201,6 +297,8 @@ config SCHED_BOOK
 	  Book scheduler support improves the CPU scheduler's decision making
 	  when dealing with machines that have several books.
 
+source kernel/Kconfig.preempt
+
 config MATHEMU
 	def_bool y
 	prompt "IEEE FPU emulation"
@@ -210,100 +308,35 @@ config MATHEMU
 	  on older ESA/390 machines. Say Y unless you know your machine doesn't
 	  need this.
 
-config COMPAT
-	def_bool y
-	prompt "Kernel support for 31 bit emulation"
-	depends on 64BIT
-	select COMPAT_BINFMT_ELF if BINFMT_ELF
-	select ARCH_WANT_OLD_COMPAT_IPC
-	help
-	  Select this option if you want to enable your system kernel to
-	  handle system-calls from ELF binaries for 31 bit ESA.  This option
-	  (and some other stuff like libraries and such) is needed for
-	  executing 31 bit applications.  It is safe to say "Y".
+source kernel/Kconfig.hz
 
-config SYSVIPC_COMPAT
-	def_bool y if COMPAT && SYSVIPC
+endmenu
 
-config KEYS_COMPAT
-	def_bool y if COMPAT && KEYS
+menu "Memory setup"
 
-config AUDIT_ARCH
+config ARCH_SPARSEMEM_ENABLE
 	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+	select SPARSEMEM_VMEMMAP
+	select SPARSEMEM_STATIC if !64BIT
 
-config HAVE_MARCH_Z900_FEATURES
-	def_bool n
-
-config HAVE_MARCH_Z990_FEATURES
-	def_bool n
-	select HAVE_MARCH_Z900_FEATURES
-
-config HAVE_MARCH_Z9_109_FEATURES
-	def_bool n
-	select HAVE_MARCH_Z990_FEATURES
-
-config HAVE_MARCH_Z10_FEATURES
-	def_bool n
-	select HAVE_MARCH_Z9_109_FEATURES
-
-config HAVE_MARCH_Z196_FEATURES
-	def_bool n
-	select HAVE_MARCH_Z10_FEATURES
-
-comment "Code generation options"
-
-choice
-	prompt "Processor type"
-	default MARCH_G5
-
-config MARCH_G5
-	bool "System/390 model G5 and G6"
-	depends on !64BIT
-	help
-	  Select this to build a 31 bit kernel that works
-	  on all ESA/390 and z/Architecture machines.
-
-config MARCH_Z900
-	bool "IBM zSeries model z800 and z900"
-	select HAVE_MARCH_Z900_FEATURES if 64BIT
-	help
-	  Select this to enable optimizations for model z800/z900 (2064 and
-	  2066 series). This will enable some optimizations that are not
-	  available on older ESA/390 (31 Bit) only CPUs.
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
 
-config MARCH_Z990
-	bool "IBM zSeries model z890 and z990"
-	select HAVE_MARCH_Z990_FEATURES if 64BIT
-	help
-	  Select this to enable optimizations for model z890/z990 (2084 and
-	  2086 series). The kernel will be slightly faster but will not work
-	  on older machines.
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
 
-config MARCH_Z9_109
-	bool "IBM System z9"
-	select HAVE_MARCH_Z9_109_FEATURES if 64BIT
-	help
-	  Select this to enable optimizations for IBM System z9 (2094 and
-	  2096 series). The kernel will be slightly faster but will not work
-	  on older machines.
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y if SPARSEMEM
 
-config MARCH_Z10
-	bool "IBM System z10"
-	select HAVE_MARCH_Z10_FEATURES if 64BIT
-	help
-	  Select this to enable optimizations for IBM System z10 (2097 and
-	  2098 series). The kernel will be slightly faster but will not work
-	  on older machines.
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
 
-config MARCH_Z196
-	bool "IBM zEnterprise 114 and 196"
-	select HAVE_MARCH_Z196_FEATURES if 64BIT
-	help
-	  Select this to enable optimizations for IBM zEnterprise 114 and 196
-	  (2818 and 2817 series). The kernel will be slightly faster but will
-	  not work on older machines.
+config FORCE_MAX_ZONEORDER
+	int
+	default "9"
 
-endchoice
+source "mm/Kconfig"
 
 config PACK_STACK
 	def_bool y
@@ -367,34 +400,9 @@ config WARN_DYNAMIC_STACK
 
 	  Say N if you are unsure.
 
-comment "Kernel preemption"
-
-source "kernel/Kconfig.preempt"
-
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	select SPARSEMEM_VMEMMAP_ENABLE
-	select SPARSEMEM_VMEMMAP
-	select SPARSEMEM_STATIC if !64BIT
-
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool y
-
-config ARCH_SELECT_MEMORY_MODEL
-	def_bool y
-
-config ARCH_ENABLE_MEMORY_HOTPLUG
-	def_bool y if SPARSEMEM
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
-	def_bool y
-
-config ARCH_HIBERNATION_POSSIBLE
-	def_bool y if 64BIT
-
-source "mm/Kconfig"
+endmenu
 
-comment "I/O subsystem configuration"
+menu "I/O subsystem"
 
 config QDIO
 	def_tristate y
@@ -425,13 +433,102 @@ config CHSC_SCH
 
 	  If unsure, say N.
 
-comment "Misc"
+config SCM_BUS
+	def_bool y
+	depends on 64BIT
+	prompt "SCM bus driver"
+	help
+	  Bus driver for Storage Class Memory.
+
+config EADM_SCH
+	def_tristate m
+	prompt "Support for EADM subchannels"
+	depends on SCM_BUS
+	help
+	  This driver allows usage of EADM subchannels. EADM subchannels act
+	  as a communication vehicle for SCM increments.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called eadm_sch.
+
+endmenu
+
+menu "Dump support"
+
+config CRASH_DUMP
+	bool "kernel crash dumps"
+	depends on 64BIT && SMP
+	select KEXEC
+	help
+	  Generate crash dump after being started by kexec.
+	  Crash dump kernels are loaded in the main kernel with kexec-tools
+	  into a specially reserved region and then later executed after
+	  a crash by kdump/kexec.
+	  For more details see Documentation/kdump/kdump.txt
+
+config ZFCPDUMP
+	def_bool n
+	prompt "zfcpdump support"
+	select SMP
+	help
+	  Select this option if you want to build an zfcpdump enabled kernel.
+	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
+
+endmenu
+
+menu "Executable file formats / Emulations"
 
 source "fs/Kconfig.binfmt"
 
-config FORCE_MAX_ZONEORDER
-	int
-	default "9"
+config SECCOMP
+	def_bool y
+	prompt "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y.
+
+endmenu
+
+menu "Power Management"
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool y if 64BIT
+
+source "kernel/power/Kconfig"
+
+endmenu
+
+source "net/Kconfig"
+
+config PCMCIA
+	def_bool n
+
+config CCW
+	def_bool y
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/s390/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+menu "Virtualization"
 
 config PFAULT
 	def_bool y
@@ -447,8 +544,8 @@ config PFAULT
 	  this option.
 
 config SHARED_KERNEL
-	def_bool y
-	prompt "VM shared kernel support"
+	bool "VM shared kernel support"
+	depends on !JUMP_LABEL
 	help
 	  Select this option, if you want to share the text segment of the
 	  Linux kernel between different VM guests. This reduces memory
@@ -543,8 +640,6 @@ config APPLDATA_NET_SUM
 	  This can also be compiled as a module, which will be called
 	  appldata_net_sum.o.
 
-source kernel/Kconfig.hz
-
 config S390_HYPFS_FS
 	def_bool y
 	prompt "s390 hypervisor file system support"
@@ -553,90 +648,20 @@ config S390_HYPFS_FS
 	  This is a virtual file system intended to provide accounting
 	  information in an s390 hypervisor environment.
 
-config KEXEC
-	def_bool n
-	prompt "kexec system call"
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but is independent of hardware/microcode support.
-
-config CRASH_DUMP
-	bool "kernel crash dumps"
-	depends on 64BIT && SMP
-	select KEXEC
-	help
-	  Generate crash dump after being started by kexec.
-	  Crash dump kernels are loaded in the main kernel with kexec-tools
-	  into a specially reserved region and then later executed after
-	  a crash by kdump/kexec.
-	  For more details see Documentation/kdump/kdump.txt
-
-config ZFCPDUMP
-	def_bool n
-	prompt "zfcpdump support"
-	select SMP
-	help
-	  Select this option if you want to build an zfcpdump enabled kernel.
-	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
+source "arch/s390/kvm/Kconfig"
 
 config S390_GUEST
 	def_bool y
-	prompt "s390 guest support for KVM (EXPERIMENTAL)"
+	prompt "s390 support for virtio devices (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTUALIZATION
 	select VIRTIO
-	select VIRTIO_RING
 	select VIRTIO_CONSOLE
 	help
-	  Select this option if you want to run the kernel as a guest under
-	  the KVM hypervisor. This will add detection for KVM as well  as a
-	  virtio transport. If KVM is detected, the virtio console will be
-	  the default console.
-
-config SECCOMP
-	def_bool y
-	prompt "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y.
-
-endmenu
+	  Enabling this option adds support for virtio based paravirtual device
+	  drivers on s390.
 
-menu "Power Management"
-
-source "kernel/power/Kconfig"
+	  Select this option if you want to run the kernel as a guest under
+	  the KVM hypervisor.
 
 endmenu
-
-source "net/Kconfig"
-
-config PCMCIA
-	def_bool n
-
-config CCW
-	def_bool y
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/s390/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-source "arch/s390/kvm/Kconfig"
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index 10e22c4ec4a7..3ad8f61c9985 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -11,6 +11,7 @@ targets	:= vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
 	   sizes.h head$(BITS).o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
+KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 KBUILD_CFLAGS += $(cflags-y)
 KBUILD_CFLAGS += $(call cc-option,-mpacked-stack)
 KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 465eca756feb..c4c6a1cf221b 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -71,34 +71,37 @@ void *memset(void *s, int c, size_t n)
 {
 	char *xs;
 
-	if (c == 0)
-		return __builtin_memset(s, 0, n);
-
-	xs = (char *) s;
-	if (n > 0)
-		do {
-			*xs++ = c;
-		} while (--n > 0);
+	xs = s;
+	while (n--)
+		*xs++ = c;
 	return s;
 }
 
-void *memcpy(void *__dest, __const void *__src, size_t __n)
+void *memcpy(void *dest, const void *src, size_t n)
 {
-	return __builtin_memcpy(__dest, __src, __n);
+	const char *s = src;
+	char *d = dest;
+
+	while (n--)
+		*d++ = *s++;
+	return dest;
 }
 
-void *memmove(void *__dest, __const void *__src, size_t __n)
+void *memmove(void *dest, const void *src, size_t n)
 {
-	char *d;
-	const char *s;
-
-	if (__dest <= __src)
-		return __builtin_memcpy(__dest, __src, __n);
-	d = __dest + __n;
-	s = __src + __n;
-	while (__n--)
-		*--d = *--s;
-	return __dest;
+	const char *s = src;
+	char *d = dest;
+
+	if (d <= s) {
+		while (n--)
+			*d++ = *s++;
+	} else {
+		d += n;
+		s += n;
+		while (n--)
+			*--d = *--s;
+	}
+	return dest;
 }
 
 static void error(char *x)
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index e402a9dd4eda..da3c1a7dcd8e 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -216,7 +216,6 @@ static struct crypto_alg aes_alg = {
 	.cra_blocksize		=	AES_BLOCK_SIZE,
 	.cra_ctxsize		=	sizeof(struct s390_aes_ctx),
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(aes_alg.cra_list),
 	.cra_init               =       fallback_init_cip,
 	.cra_exit               =       fallback_exit_cip,
 	.cra_u			=	{
@@ -398,7 +397,6 @@ static struct crypto_alg ecb_aes_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_aes_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(ecb_aes_alg.cra_list),
 	.cra_init		=	fallback_init_blk,
 	.cra_exit		=	fallback_exit_blk,
 	.cra_u			=	{
@@ -508,7 +506,6 @@ static struct crypto_alg cbc_aes_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_aes_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(cbc_aes_alg.cra_list),
 	.cra_init		=	fallback_init_blk,
 	.cra_exit		=	fallback_exit_blk,
 	.cra_u			=	{
@@ -710,7 +707,6 @@ static struct crypto_alg xts_aes_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_xts_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(xts_aes_alg.cra_list),
 	.cra_init		=	xts_fallback_init,
 	.cra_exit		=	xts_fallback_exit,
 	.cra_u			=	{
@@ -832,7 +828,6 @@ static struct crypto_alg ctr_aes_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_aes_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(ctr_aes_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	AES_MIN_KEY_SIZE,
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 1eaa371ca3ee..b49fb96f4207 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -70,7 +70,6 @@ static struct crypto_alg des_alg = {
 	.cra_blocksize		=	DES_BLOCK_SIZE,
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(des_alg.cra_list),
 	.cra_u			=	{
 		.cipher = {
 			.cia_min_keysize	=	DES_KEY_SIZE,
@@ -163,7 +162,6 @@ static struct crypto_alg ecb_des_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(ecb_des_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	DES_KEY_SIZE,
@@ -206,7 +204,6 @@ static struct crypto_alg cbc_des_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(cbc_des_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	DES_KEY_SIZE,
@@ -271,7 +268,6 @@ static struct crypto_alg des3_alg = {
 	.cra_blocksize		=	DES_BLOCK_SIZE,
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(des3_alg.cra_list),
 	.cra_u			=	{
 		.cipher = {
 			.cia_min_keysize	=	DES3_KEY_SIZE,
@@ -314,8 +310,6 @@ static struct crypto_alg ecb_des3_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(
-						ecb_des3_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	DES3_KEY_SIZE,
@@ -358,8 +352,6 @@ static struct crypto_alg cbc_des3_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(
-						cbc_des3_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	DES3_KEY_SIZE,
@@ -452,7 +444,6 @@ static struct crypto_alg ctr_des_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(ctr_des_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	DES_KEY_SIZE,
@@ -496,7 +487,6 @@ static struct crypto_alg ctr_des3_alg = {
 	.cra_ctxsize		=	sizeof(struct s390_des_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(ctr_des3_alg.cra_list),
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	DES3_KEY_SIZE,
diff --git a/arch/s390/crypto/ghash_s390.c b/arch/s390/crypto/ghash_s390.c
index b1bd170f24b1..1ebd3a15cca4 100644
--- a/arch/s390/crypto/ghash_s390.c
+++ b/arch/s390/crypto/ghash_s390.c
@@ -135,7 +135,6 @@ static struct shash_alg ghash_alg = {
 		.cra_blocksize		= GHASH_BLOCK_SIZE,
 		.cra_ctxsize		= sizeof(struct ghash_ctx),
 		.cra_module		= THIS_MODULE,
-		.cra_list		= LIST_HEAD_INIT(ghash_alg.base.cra_list),
 	},
 };
 
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index f39cd710980b..b74400e3e035 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -16,8 +16,8 @@ CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_CGROUP=y
@@ -32,20 +32,19 @@ CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_DEFAULT_DEADLINE=y
-CONFIG_PREEMPT=y
+CONFIG_HZ_100=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMM=m
-CONFIG_HZ_100=y
 CONFIG_CRASH_DUMP=y
+CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -75,6 +74,7 @@ CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
+CONFIG_BPF_JIT=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=m
@@ -121,7 +121,6 @@ CONFIG_DEBUG_NOTIFIERS=y
 CONFIG_RCU_TRACE=y
 CONFIG_KPROBES_SANITY_TEST=y
 CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
 CONFIG_LATENCYTOP=y
 CONFIG_DEBUG_PAGEALLOC=y
 CONFIG_BLK_DEV_IO_TRACE=y
@@ -173,3 +172,4 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRC7=m
+CONFIG_CMM=m
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 6767b437a103..06ea69bd387a 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -31,8 +31,8 @@ static struct dentry *hypfs_create_update_file(struct super_block *sb,
 					       struct dentry *dir);
 
 struct hypfs_sb_info {
-	uid_t uid;			/* uid used for files and dirs */
-	gid_t gid;			/* gid used for files and dirs */
+	kuid_t uid;			/* uid used for files and dirs */
+	kgid_t gid;			/* gid used for files and dirs */
 	struct dentry *update_file;	/* file to trigger update */
 	time_t last_update;		/* last update time in secs since 1970 */
 	struct mutex lock;		/* lock to protect update process */
@@ -72,8 +72,6 @@ static void hypfs_remove(struct dentry *dentry)
 	struct dentry *parent;
 
 	parent = dentry->d_parent;
-	if (!parent || !parent->d_inode)
-		return;
 	mutex_lock(&parent->d_inode->i_mutex);
 	if (hypfs_positive(dentry)) {
 		if (S_ISDIR(dentry->d_inode->i_mode))
@@ -229,6 +227,8 @@ static int hypfs_parse_options(char *options, struct super_block *sb)
 {
 	char *str;
 	substring_t args[MAX_OPT_ARGS];
+	kuid_t uid;
+	kgid_t gid;
 
 	if (!options)
 		return 0;
@@ -243,12 +243,18 @@ static int hypfs_parse_options(char *options, struct super_block *sb)
 		case opt_uid:
 			if (match_int(&args[0], &option))
 				return -EINVAL;
-			hypfs_info->uid = option;
+			uid = make_kuid(current_user_ns(), option);
+			if (!uid_valid(uid))
+				return -EINVAL;
+			hypfs_info->uid = uid;
 			break;
 		case opt_gid:
 			if (match_int(&args[0], &option))
 				return -EINVAL;
-			hypfs_info->gid = option;
+			gid = make_kgid(current_user_ns(), option);
+			if (!gid_valid(gid))
+				return -EINVAL;
+			hypfs_info->gid = gid;
 			break;
 		case opt_err:
 		default:
@@ -263,8 +269,8 @@ static int hypfs_show_options(struct seq_file *s, struct dentry *root)
 {
 	struct hypfs_sb_info *hypfs_info = root->d_sb->s_fs_info;
 
-	seq_printf(s, ",uid=%u", hypfs_info->uid);
-	seq_printf(s, ",gid=%u", hypfs_info->gid);
+	seq_printf(s, ",uid=%u", from_kuid_munged(&init_user_ns, hypfs_info->uid));
+	seq_printf(s, ",gid=%u", from_kgid_munged(&init_user_ns, hypfs_info->gid));
 	return 0;
 }
 
diff --git a/arch/s390/include/asm/appldata.h b/arch/s390/include/asm/appldata.h
index f328294faeae..32a705987156 100644
--- a/arch/s390/include/asm/appldata.h
+++ b/arch/s390/include/asm/appldata.h
@@ -70,7 +70,7 @@ static inline int appldata_asm(struct appldata_product_id *id,
 	int ry;
 
 	if (!MACHINE_IS_VM)
-		return -ENOSYS;
+		return -EOPNOTSUPP;
 	parm_list.diag = 0xdc;
 	parm_list.function = fn;
 	parm_list.parlist_length = sizeof(parm_list);
diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h
index bf115b49f444..aea451fd182e 100644
--- a/arch/s390/include/asm/chsc.h
+++ b/arch/s390/include/asm/chsc.h
@@ -125,32 +125,4 @@ struct chsc_cpd_info {
 #define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
 #define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
 
-#ifdef __KERNEL__
-
-struct css_general_char {
-	u64 : 12;
-	u32 dynio : 1;	 /* bit 12 */
-	u32 : 28;
-	u32 aif : 1;	 /* bit 41 */
-	u32 : 3;
-	u32 mcss : 1;	 /* bit 45 */
-	u32 fcs : 1;	 /* bit 46 */
-	u32 : 1;
-	u32 ext_mb : 1;  /* bit 48 */
-	u32 : 7;
-	u32 aif_tdd : 1; /* bit 56 */
-	u32 : 1;
-	u32 qebsm : 1;	 /* bit 58 */
-	u32 : 8;
-	u32 aif_osa : 1; /* bit 67 */
-	u32 : 14;
-	u32 cib : 1;	 /* bit 82 */
-	u32 : 5;
-	u32 fcx : 1;	 /* bit 88 */
-	u32 : 7;
-}__attribute__((packed));
-
-extern struct css_general_char css_general_characteristics;
-
-#endif /* __KERNEL__ */
 #endif
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 77043aa44d67..55bde6035216 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -80,6 +80,18 @@ struct erw {
 } __attribute__ ((packed));
 
 /**
+ * struct erw_eadm - EADM Subchannel extended report word
+ * @b: aob error
+ * @r: arsb error
+ */
+struct erw_eadm {
+	__u32 : 16;
+	__u32 b : 1;
+	__u32 r : 1;
+	__u32  : 14;
+} __packed;
+
+/**
  * struct sublog - subchannel logout area
  * @res0: reserved
  * @esf: extended status flags
@@ -170,9 +182,22 @@ struct esw3 {
 } __attribute__ ((packed));
 
 /**
+ * struct esw_eadm - EADM Subchannel Extended Status Word (ESW)
+ * @sublog: subchannel logout
+ * @erw: extended report word
+ */
+struct esw_eadm {
+	__u32 sublog;
+	struct erw_eadm erw;
+	__u32 : 32;
+	__u32 : 32;
+	__u32 : 32;
+} __packed;
+
+/**
  * struct irb - interruption response block
  * @scsw: subchannel status word
- * @esw: extened status word, 4 formats
+ * @esw: extened status word
  * @ecw: extended control word
  *
  * The irb that is handed to the device driver when an interrupt occurs. For
@@ -191,6 +216,7 @@ struct irb {
 		struct esw1 esw1;
 		struct esw2 esw2;
 		struct esw3 esw3;
+		struct esw_eadm eadm;
 	} esw;
 	__u8   ecw[32];
 } __attribute__ ((packed,aligned(4)));
diff --git a/arch/s390/include/asm/cmpxchg.h b/arch/s390/include/asm/cmpxchg.h
index 8d798e962b63..0f636cbdf342 100644
--- a/arch/s390/include/asm/cmpxchg.h
+++ b/arch/s390/include/asm/cmpxchg.h
@@ -7,7 +7,9 @@
 #ifndef __ASM_CMPXCHG_H
 #define __ASM_CMPXCHG_H
 
+#include <linux/mmdebug.h>
 #include <linux/types.h>
+#include <linux/bug.h>
 
 extern void __xchg_called_with_bad_pointer(void);
 
@@ -203,6 +205,65 @@ static inline unsigned long long __cmpxchg64(void *ptr,
 })
 #endif /* CONFIG_64BIT */
 
+#define __cmpxchg_double_op(p1, p2, o1, o2, n1, n2, insn)		\
+({									\
+	register __typeof__(*(p1)) __old1 asm("2") = (o1);		\
+	register __typeof__(*(p2)) __old2 asm("3") = (o2);		\
+	register __typeof__(*(p1)) __new1 asm("4") = (n1);		\
+	register __typeof__(*(p2)) __new2 asm("5") = (n2);		\
+	int cc;								\
+	asm volatile(							\
+			insn   " %[old],%[new],%[ptr]\n"		\
+		"	ipm	%[cc]\n"				\
+		"	srl	%[cc],28"				\
+		: [cc] "=d" (cc), [old] "+d" (__old1), "+d" (__old2)	\
+		: [new] "d" (__new1), "d" (__new2),			\
+		  [ptr] "Q" (*(p1)), "Q" (*(p2))			\
+		: "memory", "cc");					\
+	!cc;								\
+})
+
+#define __cmpxchg_double_4(p1, p2, o1, o2, n1, n2) \
+	__cmpxchg_double_op(p1, p2, o1, o2, n1, n2, "cds")
+
+#define __cmpxchg_double_8(p1, p2, o1, o2, n1, n2) \
+	__cmpxchg_double_op(p1, p2, o1, o2, n1, n2, "cdsg")
+
+extern void __cmpxchg_double_called_with_bad_pointer(void);
+
+#define __cmpxchg_double(p1, p2, o1, o2, n1, n2)			\
+({									\
+	int __ret;							\
+	switch (sizeof(*(p1))) {					\
+	case 4:								\
+		__ret = __cmpxchg_double_4(p1, p2, o1, o2, n1, n2);	\
+		break;							\
+	case 8:								\
+		__ret = __cmpxchg_double_8(p1, p2, o1, o2, n1, n2);	\
+		break;							\
+	default:							\
+		__cmpxchg_double_called_with_bad_pointer();		\
+	}								\
+	__ret;								\
+})
+
+#define cmpxchg_double(p1, p2, o1, o2, n1, n2)				\
+({									\
+	__typeof__(p1) __p1 = (p1);					\
+	__typeof__(p2) __p2 = (p2);					\
+	int __ret;							\
+	BUILD_BUG_ON(sizeof(*(p1)) != sizeof(long));			\
+	BUILD_BUG_ON(sizeof(*(p2)) != sizeof(long));			\
+	VM_BUG_ON((unsigned long)((__p1) + 1) != (unsigned long)(__p2));\
+	if (sizeof(long) == 4)						\
+		__ret = __cmpxchg_double_4(__p1, __p2, o1, o2, n1, n2);	\
+	else								\
+		__ret = __cmpxchg_double_8(__p1, __p2, o1, o2, n1, n2);	\
+	__ret;								\
+})
+
+#define system_has_cmpxchg_double()	1
+
 #include <asm-generic/cmpxchg-local.h>
 
 static inline unsigned long __cmpxchg_local(void *ptr,
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 234f1d859cea..a34a9d612fc0 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -65,6 +65,7 @@ typedef s64		compat_s64;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
 typedef u64		compat_u64;
+typedef u32		compat_uptr_t;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
@@ -144,6 +145,79 @@ typedef u32		compat_old_sigset_t;	/* at least 32 bits */
 
 typedef u32		compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+typedef struct compat_siginfo {
+	int	si_signo;
+	int	si_errno;
+	int	si_code;
+
+	union {
+		int _pad[128/sizeof(int) - 3];
+
+		/* kill() */
+		struct {
+			pid_t	_pid;	/* sender's pid */
+			uid_t	_uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;		/* timer id */
+			int _overrun;			/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t			_pid;	/* sender's pid */
+			uid_t			_uid;	/* sender's uid */
+			compat_sigval_t		_sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t			_pid;	/* which child */
+			uid_t			_uid;	/* sender's uid */
+			int			_status;/* exit code */
+			compat_clock_t		_utime;
+			compat_clock_t		_stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			__u32	_addr;	/* faulting insn/memory ref. - pointer */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int	_band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int	_fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+/*
+ * How these fields are to be accessed.
+ */
+#define si_pid		_sifields._kill._pid
+#define si_uid		_sifields._kill._uid
+#define si_status	_sifields._sigchld._status
+#define si_utime	_sifields._sigchld._utime
+#define si_stime	_sifields._sigchld._stime
+#define si_value	_sifields._rt._sigval
+#define si_int		_sifields._rt._sigval.sival_int
+#define si_ptr		_sifields._rt._sigval.sival_ptr
+#define si_addr		_sifields._sigfault._addr
+#define si_band		_sifields._sigpoll._band
+#define si_fd		_sifields._sigpoll._fd
+#define si_tid		_sifields._timer._tid
+#define si_overrun	_sifields._timer._overrun
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
@@ -153,7 +227,6 @@ typedef u32		compat_sigset_word;
  * as pointers because the syscall entry code will have
  * appropriately converted them already.
  */
-typedef	u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
diff --git a/arch/s390/include/asm/cpu_mf.h b/arch/s390/include/asm/cpu_mf.h
index a3afecdae145..35f0020b7ba7 100644
--- a/arch/s390/include/asm/cpu_mf.h
+++ b/arch/s390/include/asm/cpu_mf.h
@@ -21,11 +21,15 @@
 #define CPU_MF_INT_SF_LSDA	(1 << 22)	/* loss of sample data alert */
 #define CPU_MF_INT_CF_CACA	(1 <<  7)	/* counter auth. change alert */
 #define CPU_MF_INT_CF_LCDA	(1 <<  6)	/* loss of counter data alert */
+#define CPU_MF_INT_RI_HALTED	(1 <<  5)	/* run-time instr. halted */
+#define CPU_MF_INT_RI_BUF_FULL	(1 <<  4)	/* run-time instr. program
+						   buffer full */
 
 #define CPU_MF_INT_CF_MASK	(CPU_MF_INT_CF_CACA|CPU_MF_INT_CF_LCDA)
 #define CPU_MF_INT_SF_MASK	(CPU_MF_INT_SF_IAE|CPU_MF_INT_SF_ISE|	\
 				 CPU_MF_INT_SF_PRA|CPU_MF_INT_SF_SACA|	\
 				 CPU_MF_INT_SF_LSDA)
+#define CPU_MF_INT_RI_MASK	(CPU_MF_INT_RI_HALTED|CPU_MF_INT_RI_BUF_FULL)
 
 /* CPU measurement facility support */
 static inline int cpum_cf_avail(void)
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 8709bdef233c..023d5ae24482 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -12,6 +12,9 @@
 #include <linux/spinlock.h>
 #include <asm/div64.h>
 
+
+#define __ARCH_HAS_VTIME_ACCOUNT
+
 /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */
 
 typedef unsigned long long __nocast cputime_t;
diff --git a/arch/s390/include/asm/css_chars.h b/arch/s390/include/asm/css_chars.h
new file mode 100644
index 000000000000..a06ebc2623fb
--- /dev/null
+++ b/arch/s390/include/asm/css_chars.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_CSS_CHARS_H
+#define _ASM_CSS_CHARS_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+struct css_general_char {
+	u64 : 12;
+	u32 dynio : 1;	 /* bit 12 */
+	u32 : 4;
+	u32 eadm : 1;	 /* bit 17 */
+	u32 : 23;
+	u32 aif : 1;	 /* bit 41 */
+	u32 : 3;
+	u32 mcss : 1;	 /* bit 45 */
+	u32 fcs : 1;	 /* bit 46 */
+	u32 : 1;
+	u32 ext_mb : 1;  /* bit 48 */
+	u32 : 7;
+	u32 aif_tdd : 1; /* bit 56 */
+	u32 : 1;
+	u32 qebsm : 1;	 /* bit 58 */
+	u32 : 8;
+	u32 aif_osa : 1; /* bit 67 */
+	u32 : 12;
+	u32 eadm_rf : 1; /* bit 80 */
+	u32 : 1;
+	u32 cib : 1;	 /* bit 82 */
+	u32 : 5;
+	u32 fcx : 1;	 /* bit 88 */
+	u32 : 19;
+	u32 alt_ssi : 1; /* bit 108 */
+} __packed;
+
+extern struct css_general_char css_general_characteristics;
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h
new file mode 100644
index 000000000000..8d4847191ecc
--- /dev/null
+++ b/arch/s390/include/asm/eadm.h
@@ -0,0 +1,124 @@
+#ifndef _ASM_S390_EADM_H
+#define _ASM_S390_EADM_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+
+struct arqb {
+	u64 data;
+	u16 fmt:4;
+	u16:12;
+	u16 cmd_code;
+	u16:16;
+	u16 msb_count;
+	u32 reserved[12];
+} __packed;
+
+#define ARQB_CMD_MOVE	1
+
+struct arsb {
+	u16 fmt:4;
+	u32:28;
+	u8 ef;
+	u8:8;
+	u8 ecbi;
+	u8:8;
+	u8 fvf;
+	u16:16;
+	u8 eqc;
+	u32:32;
+	u64 fail_msb;
+	u64 fail_aidaw;
+	u64 fail_ms;
+	u64 fail_scm;
+	u32 reserved[4];
+} __packed;
+
+struct msb {
+	u8 fmt:4;
+	u8 oc:4;
+	u8 flags;
+	u16:12;
+	u16 bs:4;
+	u32 blk_count;
+	u64 data_addr;
+	u64 scm_addr;
+	u64:64;
+} __packed;
+
+struct aidaw {
+	u8 flags;
+	u32 :24;
+	u32 :32;
+	u64 data_addr;
+} __packed;
+
+#define MSB_OC_CLEAR	0
+#define MSB_OC_READ	1
+#define MSB_OC_WRITE	2
+#define MSB_OC_RELEASE	3
+
+#define MSB_FLAG_BNM	0x80
+#define MSB_FLAG_IDA	0x40
+
+#define MSB_BS_4K	0
+#define MSB_BS_1M	1
+
+#define AOB_NR_MSB	124
+
+struct aob {
+	struct arqb request;
+	struct arsb response;
+	struct msb msb[AOB_NR_MSB];
+} __packed __aligned(PAGE_SIZE);
+
+struct aob_rq_header {
+	struct scm_device *scmdev;
+	char data[0];
+};
+
+struct scm_device {
+	u64 address;
+	u64 size;
+	unsigned int nr_max_block;
+	struct device dev;
+	struct {
+		unsigned int persistence:4;
+		unsigned int oper_state:4;
+		unsigned int data_state:4;
+		unsigned int rank:4;
+		unsigned int release:1;
+		unsigned int res_id:8;
+	} __packed attrs;
+};
+
+#define OP_STATE_GOOD		1
+#define OP_STATE_TEMP_ERR	2
+#define OP_STATE_PERM_ERR	3
+
+struct scm_driver {
+	struct device_driver drv;
+	int (*probe) (struct scm_device *scmdev);
+	int (*remove) (struct scm_device *scmdev);
+	void (*notify) (struct scm_device *scmdev);
+	void (*handler) (struct scm_device *scmdev, void *data, int error);
+};
+
+int scm_driver_register(struct scm_driver *scmdrv);
+void scm_driver_unregister(struct scm_driver *scmdrv);
+
+int scm_start_aob(struct aob *aob);
+void scm_irq_handler(struct aob *aob, int error);
+
+struct eadm_ops {
+	int (*eadm_start) (struct aob *aob);
+	struct module *owner;
+};
+
+int scm_get_ref(void);
+void scm_put_ref(void);
+
+void register_eadm_ops(struct eadm_ops *ops);
+void unregister_eadm_ops(struct eadm_ops *ops);
+
+#endif /* _ASM_S390_EADM_H */
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 32e8449640fa..178ff966a8ba 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -101,6 +101,7 @@
 #define HWCAP_S390_HPAGE	128
 #define HWCAP_S390_ETF3EH	256
 #define HWCAP_S390_HIGH_GPRS	512
+#define HWCAP_S390_TE		1024
 
 /*
  * These are used to set parameters in the core dumps.
@@ -180,7 +181,8 @@ extern char elf_platform[];
 #define ELF_PLATFORM (elf_platform)
 
 #ifndef CONFIG_64BIT
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #else /* CONFIG_64BIT */
 #define SET_PERSONALITY(ex)					\
 do {								\
@@ -211,4 +213,6 @@ int arch_setup_additional_pages(struct linux_binprm *, int);
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
+void *fill_cpu_elf_notes(void *ptr, struct save_area *sa);
+
 #endif
diff --git a/arch/s390/include/asm/etr.h b/arch/s390/include/asm/etr.h
index a24b03b9fb64..629b79a93165 100644
--- a/arch/s390/include/asm/etr.h
+++ b/arch/s390/include/asm/etr.h
@@ -140,7 +140,7 @@ struct etr_ptff_qto {
 /* Inline assembly helper functions */
 static inline int etr_setr(struct etr_eacr *ctrl)
 {
-	int rc = -ENOSYS;
+	int rc = -EOPNOTSUPP;
 
 	asm volatile(
 		"	.insn	s,0xb2160000,%1\n"
@@ -154,7 +154,7 @@ static inline int etr_setr(struct etr_eacr *ctrl)
 /* Stores a format 1 aib with 64 bytes */
 static inline int etr_stetr(struct etr_aib *aib)
 {
-	int rc = -ENOSYS;
+	int rc = -EOPNOTSUPP;
 
 	asm volatile(
 		"	.insn	s,0xb2170000,%1\n"
@@ -169,7 +169,7 @@ static inline int etr_stetr(struct etr_aib *aib)
 static inline int etr_steai(struct etr_aib *aib, unsigned int func)
 {
 	register unsigned int reg0 asm("0") = func;
-	int rc = -ENOSYS;
+	int rc = -EOPNOTSUPP;
 
 	asm volatile(
 		"	.insn	s,0xb2b30000,%1\n"
@@ -190,7 +190,7 @@ static inline int etr_ptff(void *ptff_block, unsigned int func)
 {
 	register unsigned int reg0 asm("0") = func;
 	register unsigned long reg1 asm("1") = (unsigned long) ptff_block;
-	int rc = -ENOSYS;
+	int rc = -EOPNOTSUPP;
 
 	asm volatile(
 		"	.word	0x0104\n"
diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h
index 799ed0f1643d..2d6e6e380564 100644
--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -66,16 +66,6 @@ static inline pte_t huge_ptep_get(pte_t *ptep)
 	return pte;
 }
 
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = huge_ptep_get(ptep);
-
-	mm->context.flush_mm = 1;
-	pmd_clear((pmd_t *) ptep);
-	return pte;
-}
-
 static inline void __pmd_csp(pmd_t *pmdp)
 {
 	register unsigned long reg2 asm("2") = pmd_val(*pmdp);
@@ -117,6 +107,15 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm,
 		__pmd_csp(pmdp);
 }
 
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = huge_ptep_get(ptep);
+
+	huge_ptep_invalidate(mm, addr, ptep);
+	return pte;
+}
+
 #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \
 ({									    \
 	int __changed = !pte_same(huge_ptep_get(__ptep), __entry);	    \
@@ -131,10 +130,7 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm,
 ({									\
 	pte_t __pte = huge_ptep_get(__ptep);				\
 	if (pte_write(__pte)) {						\
-		(__mm)->context.flush_mm = 1;				\
-		if (atomic_read(&(__mm)->context.attach_count) > 1 ||	\
-		    (__mm) != current->active_mm)			\
-			huge_ptep_invalidate(__mm, __addr, __ptep);	\
+		huge_ptep_invalidate(__mm, __addr, __ptep);		\
 		set_huge_pte_at(__mm, __addr, __ptep,			\
 				huge_pte_wrprotect(__pte));		\
 	}								\
diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h
index 2b9d41899d21..6703dd986fd4 100644
--- a/arch/s390/include/asm/irq.h
+++ b/arch/s390/include/asm/irq.h
@@ -19,6 +19,7 @@ enum interruption_class {
 	EXTINT_IUC,
 	EXTINT_CMS,
 	EXTINT_CMC,
+	EXTINT_CMR,
 	IOINT_CIO,
 	IOINT_QAI,
 	IOINT_DAS,
@@ -30,6 +31,7 @@ enum interruption_class {
 	IOINT_CLW,
 	IOINT_CTC,
 	IOINT_APB,
+	IOINT_ADM,
 	IOINT_CSC,
 	NMI_NMI,
 	NR_IRQS,
diff --git a/arch/s390/include/asm/isc.h b/arch/s390/include/asm/isc.h
index 1420a1115948..5ae606456b0a 100644
--- a/arch/s390/include/asm/isc.h
+++ b/arch/s390/include/asm/isc.h
@@ -14,6 +14,7 @@
 /* Regular I/O interrupts. */
 #define IO_SCH_ISC 3			/* regular I/O subchannels */
 #define CONSOLE_ISC 1			/* console I/O subchannel */
+#define EADM_SCH_ISC 4			/* EADM subchannels */
 #define CHSC_SCH_ISC 7			/* CHSC subchannels */
 /* Adapter interrupts. */
 #define QDIO_AIRQ_ISC IO_SCH_ISC	/* I/O subchannel in qdio mode */
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index aab5555bbbda..bbf8141408cd 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -329,9 +329,13 @@ struct _lowcore {
 	__u8	pad_0x1338[0x1340-0x1338];	/* 0x1338 */
 	__u32	access_regs_save_area[16];	/* 0x1340 */
 	__u64	cregs_save_area[16];		/* 0x1380 */
+	__u8	pad_0x1400[0x1800-0x1400];	/* 0x1400 */
+
+	/* Transaction abort diagnostic block */
+	__u8	pgm_tdb[256];			/* 0x1800 */
 
 	/* align to the top of the prefix area */
-	__u8	pad_0x1400[0x2000-0x1400];	/* 0x1400 */
+	__u8	pad_0x1900[0x2000-0x1900];	/* 0x1900 */
 } __packed;
 
 #endif /* CONFIG_32BIT */
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index b749c5733657..084e7755ed9b 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -57,7 +57,7 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
 	pgd_t *pgd = mm->pgd;
 
 	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
-	if (addressing_mode != HOME_SPACE_MODE) {
+	if (s390_user_mode != HOME_SPACE_MODE) {
 		/* Load primary space page table origin. */
 		asm volatile(LCTL_OPCODE" 1,1,%0\n"
 			     : : "m" (S390_lowcore.user_asce) );
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index 6537e72e0853..86fe0ee2cee5 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -20,7 +20,7 @@
 #endif
 
 #define arch_this_cpu_to_op(pcp, val, op)				\
-do {									\
+({									\
 	typedef typeof(pcp) pcp_op_T__;					\
 	pcp_op_T__ old__, new__, prev__;				\
 	pcp_op_T__ *ptr__;						\
@@ -39,13 +39,19 @@ do {									\
 		}							\
 	} while (prev__ != old__);					\
 	preempt_enable();						\
-} while (0)
+	new__;								\
+})
 
 #define this_cpu_add_1(pcp, val) arch_this_cpu_to_op(pcp, val, +)
 #define this_cpu_add_2(pcp, val) arch_this_cpu_to_op(pcp, val, +)
 #define this_cpu_add_4(pcp, val) arch_this_cpu_to_op(pcp, val, +)
 #define this_cpu_add_8(pcp, val) arch_this_cpu_to_op(pcp, val, +)
 
+#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+
 #define this_cpu_and_1(pcp, val) arch_this_cpu_to_op(pcp, val, &)
 #define this_cpu_and_2(pcp, val) arch_this_cpu_to_op(pcp, val, &)
 #define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, &)
@@ -61,7 +67,7 @@ do {									\
 #define this_cpu_xor_4(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
 #define this_cpu_xor_8(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
 
-#define arch_this_cpu_cmpxchg(pcp, oval, nval)			\
+#define arch_this_cpu_cmpxchg(pcp, oval, nval)				\
 ({									\
 	typedef typeof(pcp) pcp_op_T__;					\
 	pcp_op_T__ ret__;						\
@@ -84,6 +90,44 @@ do {									\
 #define this_cpu_cmpxchg_4(pcp, oval, nval) arch_this_cpu_cmpxchg(pcp, oval, nval)
 #define this_cpu_cmpxchg_8(pcp, oval, nval) arch_this_cpu_cmpxchg(pcp, oval, nval)
 
+#define arch_this_cpu_xchg(pcp, nval)					\
+({									\
+	typeof(pcp) *ptr__;						\
+	typeof(pcp) ret__;						\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp));					\
+	ret__ = xchg(ptr__, nval);					\
+	preempt_enable();						\
+	ret__;								\
+})
+
+#define this_cpu_xchg_1(pcp, nval) arch_this_cpu_xchg(pcp, nval)
+#define this_cpu_xchg_2(pcp, nval) arch_this_cpu_xchg(pcp, nval)
+#define this_cpu_xchg_4(pcp, nval) arch_this_cpu_xchg(pcp, nval)
+#ifdef CONFIG_64BIT
+#define this_cpu_xchg_8(pcp, nval) arch_this_cpu_xchg(pcp, nval)
+#endif
+
+#define arch_this_cpu_cmpxchg_double(pcp1, pcp2, o1, o2, n1, n2)	\
+({									\
+	typeof(pcp1) o1__ = (o1), n1__ = (n1);				\
+	typeof(pcp2) o2__ = (o2), n2__ = (n2);				\
+	typeof(pcp1) *p1__;						\
+	typeof(pcp2) *p2__;						\
+	int ret__;							\
+	preempt_disable();						\
+	p1__ = __this_cpu_ptr(&(pcp1));					\
+	p2__ = __this_cpu_ptr(&(pcp2));					\
+	ret__ = __cmpxchg_double(p1__, p2__, o1__, o2__, n1__, n2__);	\
+	preempt_enable();						\
+	ret__;								\
+})
+
+#define this_cpu_cmpxchg_double_4 arch_this_cpu_cmpxchg_double
+#ifdef CONFIG_64BIT
+#define this_cpu_cmpxchg_double_8 arch_this_cpu_cmpxchg_double
+#endif
+
 #include <asm-generic/percpu.h>
 
 #endif /* __ARCH_S390_PERCPU__ */
diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h
index 7bcc14e395f0..bf2a2ad2f800 100644
--- a/arch/s390/include/asm/posix_types.h
+++ b/arch/s390/include/asm/posix_types.h
@@ -13,6 +13,7 @@
  */
 
 typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_ssize_t;
 #define __kernel_size_t __kernel_size_t
 
 typedef unsigned short	__kernel_old_dev_t;
@@ -25,7 +26,6 @@ typedef unsigned short  __kernel_mode_t;
 typedef unsigned short  __kernel_ipc_pid_t;
 typedef unsigned short  __kernel_uid_t;
 typedef unsigned short  __kernel_gid_t;
-typedef int             __kernel_ssize_t;
 typedef int             __kernel_ptrdiff_t;
 
 #else /* __s390x__ */
@@ -35,7 +35,6 @@ typedef unsigned int    __kernel_mode_t;
 typedef int             __kernel_ipc_pid_t;
 typedef unsigned int    __kernel_uid_t;
 typedef unsigned int    __kernel_gid_t;
-typedef long            __kernel_ssize_t;
 typedef long            __kernel_ptrdiff_t;
 typedef unsigned long   __kernel_sigset_t;      /* at least 32 bits */
 
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 11e4e3236937..56831dfa9198 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -11,12 +11,15 @@
 #ifndef __ASM_S390_PROCESSOR_H
 #define __ASM_S390_PROCESSOR_H
 
+#ifndef __ASSEMBLY__
+
 #include <linux/linkage.h>
 #include <linux/irqflags.h>
 #include <asm/cpu.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/setup.h>
+#include <asm/runtime_instr.h>
 
 /*
  * Default implementation of macro that returns current
@@ -75,11 +78,20 @@ struct thread_struct {
 	unsigned long gmap_addr;	/* address of last gmap fault. */
 	struct per_regs per_user;	/* User specified PER registers */
 	struct per_event per_event;	/* Cause of the last PER trap */
+	unsigned long per_flags;	/* Flags to control debug behavior */
         /* pfault_wait is used to block the process on a pfault event */
 	unsigned long pfault_wait;
 	struct list_head list;
+	/* cpu runtime instrumentation */
+	struct runtime_instr_cb *ri_cb;
+	int ri_signum;
+#ifdef CONFIG_64BIT
+	unsigned char trap_tdb[256];	/* Transaction abort diagnose block */
+#endif
 };
 
+#define PER_FLAG_NO_TE		1UL	/* Flag to disable transactions. */
+
 typedef struct thread_struct thread_struct;
 
 /*
@@ -130,6 +142,12 @@ struct task_struct;
 struct mm_struct;
 struct seq_file;
 
+#ifdef CONFIG_64BIT
+extern void show_cacheinfo(struct seq_file *m);
+#else
+static inline void show_cacheinfo(struct seq_file *m) { }
+#endif
+
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);
 extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
@@ -140,6 +158,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
 extern unsigned long thread_saved_pc(struct task_struct *t);
 
 extern void show_code(struct pt_regs *regs);
+extern void print_fn_code(unsigned char *code, unsigned long len);
+extern int insn_to_mnemonic(unsigned char *instruction, char buf[8]);
 
 unsigned long get_wchan(struct task_struct *p);
 #define task_pt_regs(tsk) ((struct pt_regs *) \
@@ -331,23 +351,6 @@ extern void (*s390_base_ext_handler_fn)(void);
 
 #define ARCH_LOW_ADDRESS_LIMIT	0x7fffffffUL
 
-/*
- * Helper macro for exception table entries
- */
-#ifndef CONFIG_64BIT
-#define EX_TABLE(_fault,_target)			\
-	".section __ex_table,\"a\"\n"			\
-	"	.align 4\n"				\
-	"	.long  " #_fault "," #_target "\n"	\
-	".previous\n"
-#else
-#define EX_TABLE(_fault,_target)			\
-	".section __ex_table,\"a\"\n"			\
-	"	.align 8\n"				\
-	"	.quad  " #_fault "," #_target "\n"	\
-	".previous\n"
-#endif
-
 extern int memcpy_real(void *, void *, size_t);
 extern void memcpy_absolute(void *, void *, size_t);
 
@@ -358,4 +361,25 @@ extern void memcpy_absolute(void *, void *, size_t);
 	memcpy_absolute(&(dest), &__tmp, sizeof(__tmp));	\
 }
 
-#endif                                 /* __ASM_S390_PROCESSOR_H           */
+/*
+ * Helper macro for exception table entries
+ */
+#define EX_TABLE(_fault, _target)	\
+	".section __ex_table,\"a\"\n"	\
+	".align	4\n"			\
+	".long	(" #_fault ") - .\n"	\
+	".long	(" #_target ") - .\n"	\
+	".previous\n"
+
+#else /* __ASSEMBLY__ */
+
+#define EX_TABLE(_fault, _target)	\
+	.section __ex_table,"a"	;	\
+	.align	4 ;			\
+	.long	(_fault) - . ;		\
+	.long	(_target) - . ;		\
+	.previous
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_S390_PROCESSOR_H */
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index d5f08ea566ed..ce20a53afe91 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -235,6 +235,7 @@ typedef struct
 #define PSW_MASK_ASC		0x0000C000UL
 #define PSW_MASK_CC		0x00003000UL
 #define PSW_MASK_PM		0x00000F00UL
+#define PSW_MASK_RI		0x00000000UL
 #define PSW_MASK_EA		0x00000000UL
 #define PSW_MASK_BA		0x00000000UL
 
@@ -264,10 +265,11 @@ typedef struct
 #define PSW_MASK_ASC		0x0000C00000000000UL
 #define PSW_MASK_CC		0x0000300000000000UL
 #define PSW_MASK_PM		0x00000F0000000000UL
+#define PSW_MASK_RI		0x0000008000000000UL
 #define PSW_MASK_EA		0x0000000100000000UL
 #define PSW_MASK_BA		0x0000000080000000UL
 
-#define PSW_MASK_USER		0x00003F0180000000UL
+#define PSW_MASK_USER		0x00003F8180000000UL
 
 #define PSW_ADDR_AMODE		0x0000000000000000UL
 #define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
@@ -359,17 +361,19 @@ struct per_struct_kernel {
 	unsigned char access_id;	/* PER trap access identification */
 };
 
-#define PER_EVENT_MASK			0xE9000000UL
+#define PER_EVENT_MASK			0xEB000000UL
 
 #define PER_EVENT_BRANCH		0x80000000UL
 #define PER_EVENT_IFETCH		0x40000000UL
 #define PER_EVENT_STORE			0x20000000UL
 #define PER_EVENT_STORE_REAL		0x08000000UL
+#define PER_EVENT_TRANSACTION_END	0x02000000UL
 #define PER_EVENT_NULLIFICATION		0x01000000UL
 
-#define PER_CONTROL_MASK		0x00a00000UL
+#define PER_CONTROL_MASK		0x00e00000UL
 
 #define PER_CONTROL_BRANCH_ADDRESS	0x00800000UL
+#define PER_CONTROL_SUSPENSION		0x00400000UL
 #define PER_CONTROL_ALTERATION		0x00200000UL
 
 #endif
@@ -483,6 +487,8 @@ typedef struct
 #define PTRACE_GET_LAST_BREAK	      0x5006
 #define PTRACE_PEEK_SYSTEM_CALL       0x5007
 #define PTRACE_POKE_SYSTEM_CALL	      0x5008
+#define PTRACE_ENABLE_TE	      0x5009
+#define PTRACE_DISABLE_TE	      0x5010
 
 /*
  * PT_PROT definition is loosely based on hppa bsd definition in
diff --git a/arch/s390/include/asm/runtime_instr.h b/arch/s390/include/asm/runtime_instr.h
new file mode 100644
index 000000000000..830da737ff85
--- /dev/null
+++ b/arch/s390/include/asm/runtime_instr.h
@@ -0,0 +1,98 @@
+#ifndef _RUNTIME_INSTR_H
+#define _RUNTIME_INSTR_H
+
+#define S390_RUNTIME_INSTR_START	0x1
+#define S390_RUNTIME_INSTR_STOP		0x2
+
+struct runtime_instr_cb {
+	__u64 buf_current;
+	__u64 buf_origin;
+	__u64 buf_limit;
+
+	__u32 valid		: 1;
+	__u32 pstate		: 1;
+	__u32 pstate_set_buf	: 1;
+	__u32 home_space	: 1;
+	__u32 altered		: 1;
+	__u32			: 3;
+	__u32 pstate_sample	: 1;
+	__u32 sstate_sample	: 1;
+	__u32 pstate_collect	: 1;
+	__u32 sstate_collect	: 1;
+	__u32			: 1;
+	__u32 halted_int	: 1;
+	__u32 int_requested	: 1;
+	__u32 buffer_full_int	: 1;
+	__u32 key		: 4;
+	__u32			: 9;
+	__u32 rgs		: 3;
+
+	__u32 mode		: 4;
+	__u32 next		: 1;
+	__u32 mae		: 1;
+	__u32			: 2;
+	__u32 call_type_br	: 1;
+	__u32 return_type_br	: 1;
+	__u32 other_type_br	: 1;
+	__u32 bc_other_type	: 1;
+	__u32 emit		: 1;
+	__u32 tx_abort		: 1;
+	__u32			: 2;
+	__u32 bp_xn		: 1;
+	__u32 bp_xt		: 1;
+	__u32 bp_ti		: 1;
+	__u32 bp_ni		: 1;
+	__u32 suppr_y		: 1;
+	__u32 suppr_z		: 1;
+
+	__u32 dc_miss_extra	: 1;
+	__u32 lat_lev_ignore	: 1;
+	__u32 ic_lat_lev	: 4;
+	__u32 dc_lat_lev	: 4;
+
+	__u64 reserved1;
+	__u64 scaling_factor;
+	__u64 rsic;
+	__u64 reserved2;
+} __packed __aligned(8);
+
+extern struct runtime_instr_cb runtime_instr_empty_cb;
+
+static inline void load_runtime_instr_cb(struct runtime_instr_cb *cb)
+{
+	asm volatile(".insn	rsy,0xeb0000000060,0,0,%0"	/* LRIC */
+		: : "Q" (*cb));
+}
+
+static inline void store_runtime_instr_cb(struct runtime_instr_cb *cb)
+{
+	asm volatile(".insn	rsy,0xeb0000000061,0,0,%0"	/* STRIC */
+		: "=Q" (*cb) : : "cc");
+}
+
+static inline void save_ri_cb(struct runtime_instr_cb *cb_prev)
+{
+#ifdef CONFIG_64BIT
+	if (cb_prev)
+		store_runtime_instr_cb(cb_prev);
+#endif
+}
+
+static inline void restore_ri_cb(struct runtime_instr_cb *cb_next,
+				 struct runtime_instr_cb *cb_prev)
+{
+#ifdef CONFIG_64BIT
+	if (cb_next)
+		load_runtime_instr_cb(cb_next);
+	else if (cb_prev)
+		load_runtime_instr_cb(&runtime_instr_empty_cb);
+#endif
+}
+
+#ifdef CONFIG_64BIT
+extern void exit_thread_runtime_instr(void);
+#else
+static inline void exit_thread_runtime_instr(void) { }
+#endif
+
+#endif /* _RUNTIME_INSTR_H */
diff --git a/arch/s390/include/asm/scsw.h b/arch/s390/include/asm/scsw.h
index 4071d00978cb..4af99cdaddf5 100644
--- a/arch/s390/include/asm/scsw.h
+++ b/arch/s390/include/asm/scsw.h
@@ -1,7 +1,7 @@
 /*
  *  Helper functions for scsw access.
  *
- *    Copyright IBM Corp. 2008, 2009
+ *    Copyright IBM Corp. 2008, 2012
  *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
@@ -9,7 +9,7 @@
 #define _ASM_S390_SCSW_H_
 
 #include <linux/types.h>
-#include <asm/chsc.h>
+#include <asm/css_chars.h>
 #include <asm/cio.h>
 
 /**
@@ -100,14 +100,46 @@ struct tm_scsw {
 } __attribute__ ((packed));
 
 /**
+ * struct eadm_scsw - subchannel status word for eadm subchannels
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @ectl: extended control
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @aob: AOB address
+ * @dstat: device status
+ * @cstat: subchannel status
+ */
+struct eadm_scsw {
+	u32 key:4;
+	u32:1;
+	u32 eswf:1;
+	u32 cc:2;
+	u32:6;
+	u32 ectl:1;
+	u32:2;
+	u32 fctl:3;
+	u32 actl:7;
+	u32 stctl:5;
+	u32 aob;
+	u32 dstat:8;
+	u32 cstat:8;
+	u32:16;
+} __packed;
+
+/**
  * union scsw - subchannel status word
  * @cmd: command-mode SCSW
  * @tm: transport-mode SCSW
+ * @eadm: eadm SCSW
  */
 union scsw {
 	struct cmd_scsw cmd;
 	struct tm_scsw tm;
-} __attribute__ ((packed));
+	struct eadm_scsw eadm;
+} __packed;
 
 #define SCSW_FCTL_CLEAR_FUNC	 0x1
 #define SCSW_FCTL_HALT_FUNC	 0x2
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index e6859d16ee2d..87b47ca954f1 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -60,7 +60,7 @@ void create_mem_hole(struct mem_chunk memory_chunk[], unsigned long addr,
 #define SECONDARY_SPACE_MODE	2
 #define HOME_SPACE_MODE		3
 
-extern unsigned int addressing_mode;
+extern unsigned int s390_user_mode;
 
 /*
  * Machine features detected in head.S
@@ -80,6 +80,7 @@ extern unsigned int addressing_mode;
 #define MACHINE_FLAG_LPAR	(1UL << 12)
 #define MACHINE_FLAG_SPP	(1UL << 13)
 #define MACHINE_FLAG_TOPOLOGY	(1UL << 14)
+#define MACHINE_FLAG_TE		(1UL << 15)
 
 #define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
 #define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
@@ -98,6 +99,7 @@ extern unsigned int addressing_mode;
 #define MACHINE_HAS_PFMF	(0)
 #define MACHINE_HAS_SPP		(0)
 #define MACHINE_HAS_TOPOLOGY	(0)
+#define MACHINE_HAS_TE		      (0)
 #else /* CONFIG_64BIT */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
@@ -109,6 +111,7 @@ extern unsigned int addressing_mode;
 #define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
 #define MACHINE_HAS_SPP		(S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
 #define MACHINE_HAS_TOPOLOGY	(S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
+#define MACHINE_HAS_TE		(S390_lowcore.machine_flags & MACHINE_FLAG_TE)
 #endif /* CONFIG_64BIT */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index a0a8340daafa..b64f15c3b4cc 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -30,6 +30,8 @@ extern int smp_vcpu_scheduled(int cpu);
 extern void smp_yield_cpu(int cpu);
 extern void smp_yield(void);
 extern void smp_stop_cpu(void);
+extern void smp_cpu_set_polarization(int cpu, int val);
+extern int smp_cpu_get_polarization(int cpu);
 
 #else /* CONFIG_SMP */
 
@@ -43,7 +45,8 @@ static inline void smp_call_online_cpu(void (*func)(void *), void *data)
 	func(data);
 }
 
-static inline int smp_find_processor_id(int address) { return 0; }
+static inline int smp_find_processor_id(u16 address) { return 0; }
+static inline int smp_store_status(int cpu) { return 0; }
 static inline int smp_vcpu_scheduled(int cpu) { return 1; }
 static inline void smp_yield_cpu(int cpu) { }
 static inline void smp_yield(void) { }
diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h
index 0fb34027d3f6..a60d085ddb4d 100644
--- a/arch/s390/include/asm/sparsemem.h
+++ b/arch/s390/include/asm/sparsemem.h
@@ -4,13 +4,11 @@
 #ifdef CONFIG_64BIT
 
 #define SECTION_SIZE_BITS	28
-#define MAX_PHYSADDR_BITS	46
 #define MAX_PHYSMEM_BITS	46
 
 #else
 
 #define SECTION_SIZE_BITS	25
-#define MAX_PHYSADDR_BITS	31
 #define MAX_PHYSMEM_BITS	31
 
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h
index 1bd1352fa3b5..7e2dcd7c57ef 100644
--- a/arch/s390/include/asm/string.h
+++ b/arch/s390/include/asm/string.h
@@ -96,7 +96,6 @@ static inline char *strcat(char *dst, const char *src)
 
 static inline char *strcpy(char *dst, const char *src)
 {
-#if __GNUC__ < 4
 	register int r0 asm("0") = 0;
 	char *ret = dst;
 
@@ -106,14 +105,10 @@ static inline char *strcpy(char *dst, const char *src)
 		: "+&a" (dst), "+&a" (src) : "d" (r0)
 		: "cc", "memory");
 	return ret;
-#else
-	return __builtin_strcpy(dst, src);
-#endif
 }
 
 static inline size_t strlen(const char *s)
 {
-#if __GNUC__ < 4
 	register unsigned long r0 asm("0") = 0;
 	const char *tmp = s;
 
@@ -122,9 +117,6 @@ static inline size_t strlen(const char *s)
 		"	jo	0b"
 		: "+d" (r0), "+a" (tmp) :  : "cc");
 	return r0 - (unsigned long) s;
-#else
-	return __builtin_strlen(s);
-#endif
 }
 
 static inline size_t strnlen(const char * s, size_t n)
diff --git a/arch/s390/include/asm/switch_to.h b/arch/s390/include/asm/switch_to.h
index f223068b7822..f3a9e0f92704 100644
--- a/arch/s390/include/asm/switch_to.h
+++ b/arch/s390/include/asm/switch_to.h
@@ -80,21 +80,19 @@ static inline void restore_access_regs(unsigned int *acrs)
 	if (prev->mm) {							\
 		save_fp_regs(&prev->thread.fp_regs);			\
 		save_access_regs(&prev->thread.acrs[0]);		\
+		save_ri_cb(prev->thread.ri_cb);				\
 	}								\
 	if (next->mm) {							\
 		restore_fp_regs(&next->thread.fp_regs);			\
 		restore_access_regs(&next->thread.acrs[0]);		\
+		restore_ri_cb(next->thread.ri_cb, prev->thread.ri_cb);	\
 		update_per_regs(next);					\
 	}								\
 	prev = __switch_to(prev,next);					\
 } while (0)
 
-extern void account_vtime(struct task_struct *, struct task_struct *);
-extern void account_tick_vtime(struct task_struct *);
-
 #define finish_arch_switch(prev) do {					     \
 	set_fs(current->thread.mm_segment);				     \
-	account_vtime(prev, current);					     \
 } while (0)
 
 #endif /* __ASM_SWITCH_TO_H */
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index fb214dd9b7e0..fe7b99759e12 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -12,6 +12,7 @@
 #ifndef _ASM_SYSCALL_H
 #define _ASM_SYSCALL_H	1
 
+#include <linux/audit.h>
 #include <linux/sched.h>
 #include <linux/err.h>
 #include <asm/ptrace.h>
@@ -87,4 +88,13 @@ static inline void syscall_set_arguments(struct task_struct *task,
 		regs->orig_gpr2 = args[0];
 }
 
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
+{
+#ifdef CONFIG_COMPAT
+	if (test_tsk_thread_flag(task, TIF_31BIT))
+		return AUDIT_ARCH_S390;
+#endif
+	return sizeof(long) == 8 ? AUDIT_ARCH_S390X : AUDIT_ARCH_S390;
+}
 #endif	/* _ASM_SYSCALL_H */
diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index 282ee36f6162..f92428e459f8 100644
--- a/arch/s390/include/asm/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
@@ -17,7 +17,10 @@
 #include <asm/bitsperlong.h>
 
 struct sysinfo_1_1_1 {
-	unsigned short :16;
+	unsigned char p:1;
+	unsigned char :6;
+	unsigned char t:1;
+	unsigned char :8;
 	unsigned char ccr;
 	unsigned char cai;
 	char reserved_0[28];
@@ -30,9 +33,14 @@ struct sysinfo_1_1_1 {
 	char model[16];
 	char model_perm_cap[16];
 	char model_temp_cap[16];
-	char model_cap_rating[4];
-	char model_perm_cap_rating[4];
-	char model_temp_cap_rating[4];
+	unsigned int model_cap_rating;
+	unsigned int model_perm_cap_rating;
+	unsigned int model_temp_cap_rating;
+	unsigned char typepct[5];
+	unsigned char reserved_2[3];
+	unsigned int ncr;
+	unsigned int npr;
+	unsigned int ntr;
 };
 
 struct sysinfo_1_2_1 {
@@ -47,8 +55,9 @@ struct sysinfo_1_2_2 {
 	char format;
 	char reserved_0[1];
 	unsigned short acc_offset;
-	char reserved_1[24];
-	unsigned int secondary_capability;
+	char reserved_1[20];
+	unsigned int nominal_cap;
+	unsigned int secondary_cap;
 	unsigned int capability;
 	unsigned short cpus_total;
 	unsigned short cpus_configured;
@@ -109,6 +118,8 @@ struct sysinfo_3_2_2 {
 	char reserved_544[3552];
 };
 
+extern int topology_max_mnest;
+
 #define TOPOLOGY_CPU_BITS	64
 #define TOPOLOGY_NR_MAG		6
 
@@ -142,21 +153,7 @@ struct sysinfo_15_1_x {
 	union topology_entry tle[0];
 };
 
-static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
-{
-	register int r0 asm("0") = (fc << 28) | sel1;
-	register int r1 asm("1") = sel2;
-
-	asm volatile(
-		"   stsi 0(%2)\n"
-		"0: jz   2f\n"
-		"1: lhi  %0,%3\n"
-		"2:\n"
-		EX_TABLE(0b, 1b)
-		: "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS)
-		: "cc", "memory");
-	return r0;
-}
+int stsi(void *sysinfo, int fc, int sel1, int sel2);
 
 /*
  * Service level reporting interface.
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 9fde315f3a7c..1d8fe2b17ef6 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -90,12 +90,10 @@ static inline void __tlb_flush_mm(struct mm_struct * mm)
 
 static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
 {
-	spin_lock(&mm->page_table_lock);
 	if (mm->context.flush_mm) {
 		__tlb_flush_mm(mm);
 		mm->context.flush_mm = 0;
 	}
-	spin_unlock(&mm->page_table_lock);
 }
 
 /*
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index 0837de80c351..9ca305383760 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -2,8 +2,8 @@
 #define _ASM_S390_TOPOLOGY_H
 
 #include <linux/cpumask.h>
-#include <asm/sysinfo.h>
 
+struct sysinfo_15_1_x;
 struct cpu;
 
 #ifdef CONFIG_SCHED_BOOK
@@ -51,24 +51,6 @@ static inline void topology_expect_change(void) { }
 #define POLARIZATION_VM		(2)
 #define POLARIZATION_VH		(3)
 
-extern int cpu_polarization[];
-
-static inline void cpu_set_polarization(int cpu, int val)
-{
-#ifdef CONFIG_SCHED_BOOK
-	cpu_polarization[cpu] = val;
-#endif
-}
-
-static inline int cpu_read_polarization(int cpu)
-{
-#ifdef CONFIG_SCHED_BOOK
-	return cpu_polarization[cpu];
-#else
-	return POLARIZATION_HRZ;
-#endif
-}
-
 #ifdef CONFIG_SCHED_BOOK
 void s390_init_cpu_topology(void);
 #else
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index a8ab18b18b54..34268df959a3 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -76,9 +76,22 @@ static inline int __range_ok(unsigned long addr, unsigned long size)
 
 struct exception_table_entry
 {
-        unsigned long insn, fixup;
+	int insn, fixup;
 };
 
+static inline unsigned long extable_insn(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->insn + x->insn;
+}
+
+static inline unsigned long extable_fixup(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->fixup + x->fixup;
+}
+
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
 struct uaccess_ops {
 	size_t (*copy_from_user)(size_t, const void __user *, void *);
 	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 6756e78f4808..4e64b5cd1558 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -277,7 +277,9 @@
 #define __NR_setns		339
 #define __NR_process_vm_readv	340
 #define __NR_process_vm_writev	341
-#define NR_syscalls 342
+#define __NR_s390_runtime_instr 342
+#define __NR_kcmp		343
+#define NR_syscalls 344
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 9733b3f0eb6d..4da52fe31743 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -23,10 +23,11 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o \
 	    processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o \
 	    debug.o irq.o ipl.o dis.o diag.o mem_detect.o sclp.o vdso.o \
-	    sysinfo.o jump_label.o lgr.o os_info.o
+	    sysinfo.o jump_label.o lgr.o os_info.o machine_kexec.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
+obj-y	+= $(if $(CONFIG_64BIT),relocate_kernel64.o,relocate_kernel.o)
 
 extra-y				+= head.o vmlinux.lds
 extra-y				+= $(if $(CONFIG_64BIT),head64.o,head31.o)
@@ -48,12 +49,11 @@ obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)  += ftrace.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_cpum_cf.o
 
-# Kexec part
-S390_KEXEC_OBJS := machine_kexec.o crash.o
-S390_KEXEC_OBJS += $(if $(CONFIG_64BIT),relocate_kernel64.o,relocate_kernel.o)
-obj-$(CONFIG_KEXEC) += $(S390_KEXEC_OBJS)
+ifdef CONFIG_64BIT
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_cpum_cf.o
+obj-y				+= runtime_instr.o cache.o
+endif
 
 # vdso
 obj-$(CONFIG_64BIT)		+= vdso64/
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 45ef1a7b08f9..fface87056eb 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -157,6 +157,8 @@ int main(void)
 	DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr));
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
+	DEFINE(__LC_PGM_TDB, offsetof(struct _lowcore, pgm_tdb));
+	DEFINE(__THREAD_trap_tdb, offsetof(struct task_struct, thread.trap_tdb));
 	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 #endif /* CONFIG_32BIT */
 	return 0;
diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
new file mode 100644
index 000000000000..8df8d8a19c98
--- /dev/null
+++ b/arch/s390/kernel/cache.c
@@ -0,0 +1,385 @@
+/*
+ * Extract CPU cache information and expose them via sysfs.
+ *
+ *    Copyright IBM Corp. 2012
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/notifier.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/cpu.h>
+#include <asm/facility.h>
+
+struct cache {
+	unsigned long size;
+	unsigned int line_size;
+	unsigned int associativity;
+	unsigned int nr_sets;
+	unsigned int level   : 3;
+	unsigned int type    : 2;
+	unsigned int private : 1;
+	struct list_head list;
+};
+
+struct cache_dir {
+	struct kobject *kobj;
+	struct cache_index_dir *index;
+};
+
+struct cache_index_dir {
+	struct kobject kobj;
+	int cpu;
+	struct cache *cache;
+	struct cache_index_dir *next;
+};
+
+enum {
+	CACHE_SCOPE_NOTEXISTS,
+	CACHE_SCOPE_PRIVATE,
+	CACHE_SCOPE_SHARED,
+	CACHE_SCOPE_RESERVED,
+};
+
+enum {
+	CACHE_TYPE_SEPARATE,
+	CACHE_TYPE_DATA,
+	CACHE_TYPE_INSTRUCTION,
+	CACHE_TYPE_UNIFIED,
+};
+
+enum {
+	EXTRACT_TOPOLOGY,
+	EXTRACT_LINE_SIZE,
+	EXTRACT_SIZE,
+	EXTRACT_ASSOCIATIVITY,
+};
+
+enum {
+	CACHE_TI_UNIFIED = 0,
+	CACHE_TI_INSTRUCTION = 0,
+	CACHE_TI_DATA,
+};
+
+struct cache_info {
+	unsigned char	    : 4;
+	unsigned char scope : 2;
+	unsigned char type  : 2;
+};
+
+#define CACHE_MAX_LEVEL 8
+
+union cache_topology {
+	struct cache_info ci[CACHE_MAX_LEVEL];
+	unsigned long long raw;
+};
+
+static const char * const cache_type_string[] = {
+	"Data",
+	"Instruction",
+	"Unified",
+};
+
+static struct cache_dir *cache_dir_cpu[NR_CPUS];
+static LIST_HEAD(cache_list);
+
+void show_cacheinfo(struct seq_file *m)
+{
+	struct cache *cache;
+	int index = 0;
+
+	list_for_each_entry(cache, &cache_list, list) {
+		seq_printf(m, "cache%-11d: ", index);
+		seq_printf(m, "level=%d ", cache->level);
+		seq_printf(m, "type=%s ", cache_type_string[cache->type]);
+		seq_printf(m, "scope=%s ", cache->private ? "Private" : "Shared");
+		seq_printf(m, "size=%luK ", cache->size >> 10);
+		seq_printf(m, "line_size=%u ", cache->line_size);
+		seq_printf(m, "associativity=%d", cache->associativity);
+		seq_puts(m, "\n");
+		index++;
+	}
+}
+
+static inline unsigned long ecag(int ai, int li, int ti)
+{
+	unsigned long cmd, val;
+
+	cmd = ai << 4 | li << 1 | ti;
+	asm volatile(".insn	rsy,0xeb000000004c,%0,0,0(%1)" /* ecag */
+		     : "=d" (val) : "a" (cmd));
+	return val;
+}
+
+static int __init cache_add(int level, int private, int type)
+{
+	struct cache *cache;
+	int ti;
+
+	cache = kzalloc(sizeof(*cache), GFP_KERNEL);
+	if (!cache)
+		return -ENOMEM;
+	ti = type == CACHE_TYPE_DATA ? CACHE_TI_DATA : CACHE_TI_UNIFIED;
+	cache->size = ecag(EXTRACT_SIZE, level, ti);
+	cache->line_size = ecag(EXTRACT_LINE_SIZE, level, ti);
+	cache->associativity = ecag(EXTRACT_ASSOCIATIVITY, level, ti);
+	cache->nr_sets = cache->size / cache->associativity;
+	cache->nr_sets /= cache->line_size;
+	cache->private = private;
+	cache->level = level + 1;
+	cache->type = type - 1;
+	list_add_tail(&cache->list, &cache_list);
+	return 0;
+}
+
+static void __init cache_build_info(void)
+{
+	struct cache *cache, *next;
+	union cache_topology ct;
+	int level, private, rc;
+
+	ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0);
+	for (level = 0; level < CACHE_MAX_LEVEL; level++) {
+		switch (ct.ci[level].scope) {
+		case CACHE_SCOPE_NOTEXISTS:
+		case CACHE_SCOPE_RESERVED:
+			return;
+		case CACHE_SCOPE_SHARED:
+			private = 0;
+			break;
+		case CACHE_SCOPE_PRIVATE:
+			private = 1;
+			break;
+		}
+		if (ct.ci[level].type == CACHE_TYPE_SEPARATE) {
+			rc  = cache_add(level, private, CACHE_TYPE_DATA);
+			rc |= cache_add(level, private, CACHE_TYPE_INSTRUCTION);
+		} else {
+			rc = cache_add(level, private, ct.ci[level].type);
+		}
+		if (rc)
+			goto error;
+	}
+	return;
+error:
+	list_for_each_entry_safe(cache, next, &cache_list, list) {
+		list_del(&cache->list);
+		kfree(cache);
+	}
+}
+
+static struct cache_dir *__cpuinit cache_create_cache_dir(int cpu)
+{
+	struct cache_dir *cache_dir;
+	struct kobject *kobj = NULL;
+	struct device *dev;
+
+	dev = get_cpu_device(cpu);
+	if (!dev)
+		goto out;
+	kobj = kobject_create_and_add("cache", &dev->kobj);
+	if (!kobj)
+		goto out;
+	cache_dir = kzalloc(sizeof(*cache_dir), GFP_KERNEL);
+	if (!cache_dir)
+		goto out;
+	cache_dir->kobj = kobj;
+	cache_dir_cpu[cpu] = cache_dir;
+	return cache_dir;
+out:
+	kobject_put(kobj);
+	return NULL;
+}
+
+static struct cache_index_dir *kobj_to_cache_index_dir(struct kobject *kobj)
+{
+	return container_of(kobj, struct cache_index_dir, kobj);
+}
+
+static void cache_index_release(struct kobject *kobj)
+{
+	struct cache_index_dir *index;
+
+	index = kobj_to_cache_index_dir(kobj);
+	kfree(index);
+}
+
+static ssize_t cache_index_show(struct kobject *kobj,
+				struct attribute *attr, char *buf)
+{
+	struct kobj_attribute *kobj_attr;
+
+	kobj_attr = container_of(attr, struct kobj_attribute, attr);
+	return kobj_attr->show(kobj, kobj_attr, buf);
+}
+
+#define DEFINE_CACHE_ATTR(_name, _format, _value)			\
+static ssize_t cache_##_name##_show(struct kobject *kobj,		\
+				    struct kobj_attribute *attr,	\
+				    char *buf)				\
+{									\
+	struct cache_index_dir *index;					\
+									\
+	index = kobj_to_cache_index_dir(kobj);				\
+	return sprintf(buf, _format, _value);				\
+}									\
+static struct kobj_attribute cache_##_name##_attr =			\
+	__ATTR(_name, 0444, cache_##_name##_show, NULL);
+
+DEFINE_CACHE_ATTR(size, "%luK\n", index->cache->size >> 10);
+DEFINE_CACHE_ATTR(coherency_line_size, "%u\n", index->cache->line_size);
+DEFINE_CACHE_ATTR(number_of_sets, "%u\n", index->cache->nr_sets);
+DEFINE_CACHE_ATTR(ways_of_associativity, "%u\n", index->cache->associativity);
+DEFINE_CACHE_ATTR(type, "%s\n", cache_type_string[index->cache->type]);
+DEFINE_CACHE_ATTR(level, "%d\n", index->cache->level);
+
+static ssize_t shared_cpu_map_func(struct kobject *kobj, int type, char *buf)
+{
+	struct cache_index_dir *index;
+	int len;
+
+	index = kobj_to_cache_index_dir(kobj);
+	len = type ?
+		cpulist_scnprintf(buf, PAGE_SIZE - 2, cpumask_of(index->cpu)) :
+		cpumask_scnprintf(buf, PAGE_SIZE - 2, cpumask_of(index->cpu));
+	len += sprintf(&buf[len], "\n");
+	return len;
+}
+
+static ssize_t shared_cpu_map_show(struct kobject *kobj,
+				   struct kobj_attribute *attr, char *buf)
+{
+	return shared_cpu_map_func(kobj, 0, buf);
+}
+static struct kobj_attribute cache_shared_cpu_map_attr =
+	__ATTR(shared_cpu_map, 0444, shared_cpu_map_show, NULL);
+
+static ssize_t shared_cpu_list_show(struct kobject *kobj,
+				    struct kobj_attribute *attr, char *buf)
+{
+	return shared_cpu_map_func(kobj, 1, buf);
+}
+static struct kobj_attribute cache_shared_cpu_list_attr =
+	__ATTR(shared_cpu_list, 0444, shared_cpu_list_show, NULL);
+
+static struct attribute *cache_index_default_attrs[] = {
+	&cache_type_attr.attr,
+	&cache_size_attr.attr,
+	&cache_number_of_sets_attr.attr,
+	&cache_ways_of_associativity_attr.attr,
+	&cache_level_attr.attr,
+	&cache_coherency_line_size_attr.attr,
+	&cache_shared_cpu_map_attr.attr,
+	&cache_shared_cpu_list_attr.attr,
+	NULL,
+};
+
+static const struct sysfs_ops cache_index_ops = {
+	.show = cache_index_show,
+};
+
+static struct kobj_type cache_index_type = {
+	.sysfs_ops = &cache_index_ops,
+	.release = cache_index_release,
+	.default_attrs = cache_index_default_attrs,
+};
+
+static int __cpuinit cache_create_index_dir(struct cache_dir *cache_dir,
+					    struct cache *cache, int index,
+					    int cpu)
+{
+	struct cache_index_dir *index_dir;
+	int rc;
+
+	index_dir = kzalloc(sizeof(*index_dir), GFP_KERNEL);
+	if (!index_dir)
+		return -ENOMEM;
+	index_dir->cache = cache;
+	index_dir->cpu = cpu;
+	rc = kobject_init_and_add(&index_dir->kobj, &cache_index_type,
+				  cache_dir->kobj, "index%d", index);
+	if (rc)
+		goto out;
+	index_dir->next = cache_dir->index;
+	cache_dir->index = index_dir;
+	return 0;
+out:
+	kfree(index_dir);
+	return rc;
+}
+
+static int __cpuinit cache_add_cpu(int cpu)
+{
+	struct cache_dir *cache_dir;
+	struct cache *cache;
+	int rc, index = 0;
+
+	if (list_empty(&cache_list))
+		return 0;
+	cache_dir = cache_create_cache_dir(cpu);
+	if (!cache_dir)
+		return -ENOMEM;
+	list_for_each_entry(cache, &cache_list, list) {
+		if (!cache->private)
+			break;
+		rc = cache_create_index_dir(cache_dir, cache, index, cpu);
+		if (rc)
+			return rc;
+		index++;
+	}
+	return 0;
+}
+
+static void __cpuinit cache_remove_cpu(int cpu)
+{
+	struct cache_index_dir *index, *next;
+	struct cache_dir *cache_dir;
+
+	cache_dir = cache_dir_cpu[cpu];
+	if (!cache_dir)
+		return;
+	index = cache_dir->index;
+	while (index) {
+		next = index->next;
+		kobject_put(&index->kobj);
+		index = next;
+	}
+	kobject_put(cache_dir->kobj);
+	kfree(cache_dir);
+	cache_dir_cpu[cpu] = NULL;
+}
+
+static int __cpuinit cache_hotplug(struct notifier_block *nfb,
+				   unsigned long action, void *hcpu)
+{
+	int cpu = (long)hcpu;
+	int rc = 0;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_ONLINE:
+		rc = cache_add_cpu(cpu);
+		if (rc)
+			cache_remove_cpu(cpu);
+		break;
+	case CPU_DEAD:
+		cache_remove_cpu(cpu);
+		break;
+	}
+	return rc ? NOTIFY_BAD : NOTIFY_OK;
+}
+
+static int __init cache_init(void)
+{
+	int cpu;
+
+	if (!test_facility(34))
+		return 0;
+	cache_build_info();
+	for_each_online_cpu(cpu)
+		cache_add_cpu(cpu);
+	hotcpu_notifier(cache_hotplug, 0);
+	return 0;
+}
+device_initcall(cache_init);
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index d1225089a4bb..189963c90c6e 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -131,13 +131,19 @@ asmlinkage long sys32_setresuid16(u16 ruid, u16 euid, u16 suid)
 		low2highuid(suid));
 }
 
-asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid)
+asmlinkage long sys32_getresuid16(u16 __user *ruidp, u16 __user *euidp, u16 __user *suidp)
 {
+	const struct cred *cred = current_cred();
 	int retval;
+	u16 ruid, euid, suid;
 
-	if (!(retval = put_user(high2lowuid(current->cred->uid), ruid)) &&
-	    !(retval = put_user(high2lowuid(current->cred->euid), euid)))
-		retval = put_user(high2lowuid(current->cred->suid), suid);
+	ruid = high2lowuid(from_kuid_munged(cred->user_ns, cred->uid));
+	euid = high2lowuid(from_kuid_munged(cred->user_ns, cred->euid));
+	suid = high2lowuid(from_kuid_munged(cred->user_ns, cred->suid));
+
+	if (!(retval   = put_user(ruid, ruidp)) &&
+	    !(retval   = put_user(euid, euidp)))
+		retval = put_user(suid, suidp);
 
 	return retval;
 }
@@ -148,13 +154,19 @@ asmlinkage long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid)
 		low2highgid(sgid));
 }
 
-asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
+asmlinkage long sys32_getresgid16(u16 __user *rgidp, u16 __user *egidp, u16 __user *sgidp)
 {
+	const struct cred *cred = current_cred();
 	int retval;
+	u16 rgid, egid, sgid;
+
+	rgid = high2lowgid(from_kgid_munged(cred->user_ns, cred->gid));
+	egid = high2lowgid(from_kgid_munged(cred->user_ns, cred->egid));
+	sgid = high2lowgid(from_kgid_munged(cred->user_ns, cred->sgid));
 
-	if (!(retval = put_user(high2lowgid(current->cred->gid), rgid)) &&
-	    !(retval = put_user(high2lowgid(current->cred->egid), egid)))
-		retval = put_user(high2lowgid(current->cred->sgid), sgid);
+	if (!(retval   = put_user(rgid, rgidp)) &&
+	    !(retval   = put_user(egid, egidp)))
+		retval = put_user(sgid, sgidp);
 
 	return retval;
 }
@@ -258,22 +270,22 @@ asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist)
 
 asmlinkage long sys32_getuid16(void)
 {
-	return high2lowuid(current->cred->uid);
+	return high2lowuid(from_kuid_munged(current_user_ns(), current_uid()));
 }
 
 asmlinkage long sys32_geteuid16(void)
 {
-	return high2lowuid(current->cred->euid);
+	return high2lowuid(from_kuid_munged(current_user_ns(), current_euid()));
 }
 
 asmlinkage long sys32_getgid16(void)
 {
-	return high2lowgid(current->cred->gid);
+	return high2lowgid(from_kgid_munged(current_user_ns(), current_gid()));
 }
 
 asmlinkage long sys32_getegid16(void)
 {
-	return high2lowgid(current->cred->egid);
+	return high2lowgid(from_kgid_munged(current_user_ns(), current_egid()));
 }
 
 /*
@@ -620,7 +632,6 @@ asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
 		return -EFAULT;
 	if (a.offset & ~PAGE_MASK)
 		return -EINVAL;
-	a.addr = (unsigned long) compat_ptr(a.addr);
 	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
 			      a.offset >> PAGE_SHIFT);
 }
@@ -631,7 +642,6 @@ asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		return -EFAULT;
-	a.addr = (unsigned long) compat_ptr(a.addr);
 	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
 }
 
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 9635d759c2b9..90887bd98cf0 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -23,74 +23,6 @@ struct old_sigaction32 {
        __u32			sa_flags;
        __u32			sa_restorer;	/* Another 32 bit pointer */
 };
- 
-typedef struct compat_siginfo {
-	int	si_signo;
-	int	si_errno;
-	int	si_code;
-
-	union {
-		int _pad[((128/sizeof(int)) - 3)];
-
-		/* kill() */
-		struct {
-			pid_t	_pid;	/* sender's pid */
-			uid_t	_uid;	/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;	/* same as below */
-			int _sys_private;       /* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			pid_t			_pid;	/* sender's pid */
-			uid_t			_uid;	/* sender's uid */
-			compat_sigval_t		_sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			pid_t			_pid;	/* which child */
-			uid_t			_uid;	/* sender's uid */
-			int			_status;/* exit code */
-			compat_clock_t		_utime;
-			compat_clock_t		_stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			__u32	_addr;	/* faulting insn/memory ref. - pointer */
-		} _sigfault;
-                          
-		/* SIGPOLL */
-		struct {
-			int	_band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int	_fd;
-		} _sigpoll;
-	} _sifields;
-} compat_siginfo_t;
-
-/*
- * How these fields are to be accessed.
- */
-#define si_pid		_sifields._kill._pid
-#define si_uid		_sifields._kill._uid
-#define si_status	_sifields._sigchld._status
-#define si_utime	_sifields._sigchld._utime
-#define si_stime	_sifields._sigchld._stime
-#define si_value	_sifields._rt._sigval
-#define si_int		_sifields._rt._sigval.sival_int
-#define si_ptr		_sifields._rt._sigval.sival_ptr
-#define si_addr		_sifields._sigfault._addr
-#define si_band		_sifields._sigpoll._band
-#define si_fd		_sifields._sigpoll._fd    
-#define si_tid		_sifields._timer._tid
-#define si_overrun	_sifields._timer._overrun
 
 /* asm/sigcontext.h */
 typedef union
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index e835d6d5b7fd..3afba804fe97 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1635,7 +1635,7 @@ ENTRY(compat_sys_process_vm_readv_wrapper)
 	llgfr	%r6,%r6			# unsigned long
 	llgf	%r0,164(%r15)		# unsigned long
 	stg	%r0,160(%r15)
-	jg	sys_process_vm_readv
+	jg	compat_sys_process_vm_readv
 
 ENTRY(compat_sys_process_vm_writev_wrapper)
 	lgfr	%r2,%r2			# compat_pid_t
@@ -1645,4 +1645,17 @@ ENTRY(compat_sys_process_vm_writev_wrapper)
 	llgfr	%r6,%r6			# unsigned long
 	llgf	%r0,164(%r15)		# unsigned long
 	stg	%r0,160(%r15)
-	jg	sys_process_vm_writev
+	jg	compat_sys_process_vm_writev
+
+ENTRY(sys_s390_runtime_instr_wrapper)
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	jg	sys_s390_runtime_instr
+
+ENTRY(sys_kcmp_wrapper)
+	lgfr	%r2,%r2			# pid_t
+	lgfr	%r3,%r3			# pid_t
+	lgfr	%r4,%r4			# int
+	llgfr	%r5,%r5			# unsigned long
+	llgfr	%r6,%r6			# unsigned long
+	jg	sys_kcmp
diff --git a/arch/s390/kernel/crash.c b/arch/s390/kernel/crash.c
deleted file mode 100644
index 3819153de8bd..000000000000
--- a/arch/s390/kernel/crash.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright IBM Corp. 2005
- *
- * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- *
- */
-
-#include <linux/threads.h>
-#include <linux/kexec.h>
-#include <linux/reboot.h>
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
-}
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index cc1172b26873..fb8d8781a011 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -13,8 +13,9 @@
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 #include <linux/elf.h>
-#include <asm/ipl.h>
 #include <asm/os_info.h>
+#include <asm/elf.h>
+#include <asm/ipl.h>
 
 #define PTR_ADD(x, y) (((char *) (x)) + ((unsigned long) (y)))
 #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index 619c5d350726..f00286bd2ef9 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -315,6 +315,11 @@ enum {
 	LONG_INSN_POPCNT,
 	LONG_INSN_RISBHG,
 	LONG_INSN_RISBLG,
+	LONG_INSN_RINEXT,
+	LONG_INSN_RIEMIT,
+	LONG_INSN_TABORT,
+	LONG_INSN_TBEGIN,
+	LONG_INSN_TBEGINC,
 };
 
 static char *long_insn_name[] = {
@@ -329,7 +334,12 @@ static char *long_insn_name[] = {
 	[LONG_INSN_LLGHRL] = "llghrl",
 	[LONG_INSN_POPCNT] = "popcnt",
 	[LONG_INSN_RISBHG] = "risbhg",
-	[LONG_INSN_RISBLG] = "risblk",
+	[LONG_INSN_RISBLG] = "risblg",
+	[LONG_INSN_RINEXT] = "rinext",
+	[LONG_INSN_RIEMIT] = "riemit",
+	[LONG_INSN_TABORT] = "tabort",
+	[LONG_INSN_TBEGIN] = "tbegin",
+	[LONG_INSN_TBEGINC] = "tbeginc",
 };
 
 static struct insn opcode[] = {
@@ -582,6 +592,17 @@ static struct insn opcode_a7[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
+static struct insn opcode_aa[] = {
+#ifdef CONFIG_64BIT
+	{ { 0, LONG_INSN_RINEXT }, 0x00, INSTR_RI_RI },
+	{ "rion", 0x01, INSTR_RI_RI },
+	{ "tric", 0x02, INSTR_RI_RI },
+	{ "rioff", 0x03, INSTR_RI_RI },
+	{ { 0, LONG_INSN_RIEMIT }, 0x04, INSTR_RI_RI },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
 static struct insn opcode_b2[] = {
 #ifdef CONFIG_64BIT
 	{ "sske", 0x2b, INSTR_RRF_M0RR },
@@ -594,6 +615,9 @@ static struct insn opcode_b2[] = {
 	{ "lpswe", 0xb2, INSTR_S_RD },
 	{ "srnmt", 0xb9, INSTR_S_RD },
 	{ "lfas", 0xbd, INSTR_S_RD },
+	{ "etndg", 0xec, INSTR_RRE_R0 },
+	{ { 0, LONG_INSN_TABORT }, 0xfc, INSTR_S_RD },
+	{ "tend", 0xf8, INSTR_S_RD },
 #endif
 	{ "stidp", 0x02, INSTR_S_RD },
 	{ "sck", 0x04, INSTR_S_RD },
@@ -1150,6 +1174,7 @@ static struct insn opcode_e3[] = {
 	{ "stfh", 0xcb, INSTR_RXY_RRRD },
 	{ "chf", 0xcd, INSTR_RXY_RRRD },
 	{ "clhf", 0xcf, INSTR_RXY_RRRD },
+	{ "ntstg", 0x25, INSTR_RXY_RRRD },
 #endif
 	{ "lrv", 0x1e, INSTR_RXY_RRRD },
 	{ "lrvh", 0x1f, INSTR_RXY_RRRD },
@@ -1173,6 +1198,8 @@ static struct insn opcode_e5[] = {
 	{ "mvhhi", 0x44, INSTR_SIL_RDI },
 	{ "mvhi", 0x4c, INSTR_SIL_RDI },
 	{ "mvghi", 0x48, INSTR_SIL_RDI },
+	{ { 0, LONG_INSN_TBEGIN }, 0x60, INSTR_SIL_RDU },
+	{ { 0, LONG_INSN_TBEGINC }, 0x61, INSTR_SIL_RDU },
 #endif
 	{ "lasp", 0x00, INSTR_SSE_RDRD },
 	{ "tprot", 0x01, INSTR_SSE_RDRD },
@@ -1210,6 +1237,9 @@ static struct insn opcode_eb[] = {
 	{ "cliy", 0x55, INSTR_SIY_URD },
 	{ "oiy", 0x56, INSTR_SIY_URD },
 	{ "xiy", 0x57, INSTR_SIY_URD },
+	{ "lric", 0x60, INSTR_RSY_RDRM },
+	{ "stric", 0x61, INSTR_RSY_RDRM },
+	{ "mric", 0x62, INSTR_RSY_RDRM },
 	{ "icmh", 0x80, INSTR_RSE_RURD },
 	{ "icmh", 0x80, INSTR_RSY_RURD },
 	{ "icmy", 0x81, INSTR_RSY_RURD },
@@ -1408,6 +1438,9 @@ static struct insn *find_insn(unsigned char *code)
 	case 0xa7:
 		table = opcode_a7;
 		break;
+	case 0xaa:
+		table = opcode_aa;
+		break;
 	case 0xb2:
 		table = opcode_b2;
 		break;
@@ -1468,6 +1501,33 @@ static struct insn *find_insn(unsigned char *code)
 	return NULL;
 }
 
+/**
+ * insn_to_mnemonic - decode an s390 instruction
+ * @instruction: instruction to decode
+ * @buf: buffer to fill with mnemonic
+ *
+ * Decode the instruction at @instruction and store the corresponding
+ * mnemonic into @buf.
+ * @buf is left unchanged if the instruction could not be decoded.
+ * Returns:
+ *  %0 on success, %-ENOENT if the instruction was not found.
+ */
+int insn_to_mnemonic(unsigned char *instruction, char buf[8])
+{
+	struct insn *insn;
+
+	insn = find_insn(instruction);
+	if (!insn)
+		return -ENOENT;
+	if (insn->name[0] == '\0')
+		snprintf(buf, sizeof(buf), "%s",
+			 long_insn_name[(int) insn->name[1]]);
+	else
+		snprintf(buf, sizeof(buf), "%.5s", insn->name);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(insn_to_mnemonic);
+
 static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
 {
 	struct insn *insn;
@@ -1601,3 +1661,26 @@ void show_code(struct pt_regs *regs)
 	}
 	printk("\n");
 }
+
+void print_fn_code(unsigned char *code, unsigned long len)
+{
+	char buffer[64], *ptr;
+	int opsize, i;
+
+	while (len) {
+		ptr = buffer;
+		opsize = insn_length(*code);
+		ptr += sprintf(ptr, "%p: ", code);
+		for (i = 0; i < opsize; i++)
+			ptr += sprintf(ptr, "%02x", code[i]);
+		*ptr++ = '\t';
+		if (i < 4)
+			*ptr++ = '\t';
+		ptr += print_insn(ptr, code, (unsigned long) code);
+		*ptr++ = '\n';
+		*ptr++ = 0;
+		printk(buffer);
+		code += opsize;
+		len -= opsize;
+	}
+}
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 83c3271c442b..7f4717675c19 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -215,36 +215,54 @@ static noinline __init void init_kernel_storage_key(void)
 				     PAGE_DEFAULT_KEY, 0);
 }
 
-static __initdata struct sysinfo_3_2_2 vmms __aligned(PAGE_SIZE);
+static __initdata char sysinfo_page[PAGE_SIZE] __aligned(PAGE_SIZE);
 
 static noinline __init void detect_machine_type(void)
 {
+	struct sysinfo_3_2_2 *vmms = (struct sysinfo_3_2_2 *)&sysinfo_page;
+
 	/* Check current-configuration-level */
-	if ((stsi(NULL, 0, 0, 0) >> 28) <= 2) {
+	if (stsi(NULL, 0, 0, 0) <= 2) {
 		S390_lowcore.machine_flags |= MACHINE_FLAG_LPAR;
 		return;
 	}
 	/* Get virtual-machine cpu information. */
-	if (stsi(&vmms, 3, 2, 2) == -ENOSYS || !vmms.count)
+	if (stsi(vmms, 3, 2, 2) || !vmms->count)
 		return;
 
 	/* Running under KVM? If not we assume z/VM */
-	if (!memcmp(vmms.vm[0].cpi, "\xd2\xe5\xd4", 3))
+	if (!memcmp(vmms->vm[0].cpi, "\xd2\xe5\xd4", 3))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
 	else
 		S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
 }
 
+static __init void setup_topology(void)
+{
+#ifdef CONFIG_64BIT
+	int max_mnest;
+
+	if (!test_facility(11))
+		return;
+	S390_lowcore.machine_flags |= MACHINE_FLAG_TOPOLOGY;
+	for (max_mnest = 6; max_mnest > 1; max_mnest--) {
+		if (stsi(&sysinfo_page, 15, 1, max_mnest) == 0)
+			break;
+	}
+	topology_max_mnest = max_mnest;
+#endif
+}
+
 static void early_pgm_check_handler(void)
 {
-	unsigned long addr;
 	const struct exception_table_entry *fixup;
+	unsigned long addr;
 
 	addr = S390_lowcore.program_old_psw.addr;
 	fixup = search_exception_tables(addr & PSW_ADDR_INSN);
 	if (!fixup)
 		disabled_wait(0);
-	S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
+	S390_lowcore.program_old_psw.addr = extable_fixup(fixup)|PSW_ADDR_AMODE;
 }
 
 static noinline __init void setup_lowcore_early(void)
@@ -267,12 +285,10 @@ static noinline __init void setup_facility_list(void)
 
 static noinline __init void setup_hpage(void)
 {
-#ifndef CONFIG_DEBUG_PAGEALLOC
 	if (!test_facility(2) || !test_facility(8))
 		return;
 	S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;
 	__ctl_set_bit(0, 23);
-#endif
 }
 
 static __init void detect_mvpg(void)
@@ -366,12 +382,12 @@ static __init void detect_machine_facilities(void)
 		S390_lowcore.machine_flags |= MACHINE_FLAG_IDTE;
 	if (test_facility(8))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_PFMF;
-	if (test_facility(11))
-		S390_lowcore.machine_flags |= MACHINE_FLAG_TOPOLOGY;
 	if (test_facility(27))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
 	if (test_facility(40))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
+	if (test_facility(50) && test_facility(73))
+		S390_lowcore.machine_flags |= MACHINE_FLAG_TE;
 #endif
 }
 
@@ -441,7 +457,6 @@ static void __init setup_boot_command_line(void)
 	append_to_cmdline(append_ipl_scpdata);
 }
 
-
 /*
  * Save ipl parameters, clear bss memory, initialize storage keys
  * and create a kernel NSS at startup if the SAVESYS= parm is defined
@@ -468,6 +483,7 @@ void __init startup_init(void)
 	detect_diag44();
 	detect_machine_facilities();
 	setup_hpage();
+	setup_topology();
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
 #ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 349b7eeb348a..7549985402f7 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -10,6 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <asm/processor.h>
 #include <asm/cache.h>
 #include <asm/errno.h>
 #include <asm/ptrace.h>
@@ -412,6 +413,11 @@ ENTRY(pgm_check_handler)
 1:	UPDATE_VTIME %r14,__LC_SYNC_ENTER_TIMER
 	LAST_BREAK %r14
 	lg	%r15,__LC_KERNEL_STACK
+	lg	%r14,__TI_task(%r12)
+	lghi	%r13,__LC_PGM_TDB
+	tm	__LC_PGM_ILC+2,0x02	# check for transaction abort
+	jz	2f
+	mvc	__THREAD_trap_tdb(256,%r14),0(%r13)
 2:	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
 	la	%r11,STACK_FRAME_OVERHEAD(%r15)
 	stmg	%r0,%r7,__PT_R0(%r11)
@@ -422,13 +428,12 @@ ENTRY(pgm_check_handler)
 	stg	%r10,__PT_ARGS(%r11)
 	tm	__LC_PGM_ILC+3,0x80	# check for per exception
 	jz	0f
-	lg	%r1,__TI_task(%r12)
 	tmhh	%r8,0x0001		# kernel per event ?
 	jz	pgm_kprobe
 	oi	__TI_flags+7(%r12),_TIF_PER_TRAP
-	mvc	__THREAD_per_address(8,%r1),__LC_PER_ADDRESS
-	mvc	__THREAD_per_cause(2,%r1),__LC_PER_CAUSE
-	mvc	__THREAD_per_paid(1,%r1),__LC_PER_PAID
+	mvc	__THREAD_per_address(8,%r14),__LC_PER_ADDRESS
+	mvc	__THREAD_per_cause(2,%r14),__LC_PER_CAUSE
+	mvc	__THREAD_per_paid(1,%r14),__LC_PER_PAID
 0:	REENABLE_IRQS
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 	larl	%r1,pgm_check_table
@@ -1004,9 +1009,7 @@ sie_fault:
 .Lhost_id:
 	.quad	0
 
-	.section __ex_table,"a"
-	.quad	sie_loop,sie_fault
-	.previous
+	EX_TABLE(sie_loop,sie_fault)
 #endif
 
 		.section .rodata, "a"
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index dd7630d8aab7..6cdc55b26d68 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -30,33 +30,35 @@ struct irq_class {
 };
 
 static const struct irq_class intrclass_names[] = {
-	{.name = "EXT" },
-	{.name = "I/O" },
-	{.name = "CLK", .desc = "[EXT] Clock Comparator" },
-	{.name = "EXC", .desc = "[EXT] External Call" },
-	{.name = "EMS", .desc = "[EXT] Emergency Signal" },
-	{.name = "TMR", .desc = "[EXT] CPU Timer" },
-	{.name = "TAL", .desc = "[EXT] Timing Alert" },
-	{.name = "PFL", .desc = "[EXT] Pseudo Page Fault" },
-	{.name = "DSD", .desc = "[EXT] DASD Diag" },
-	{.name = "VRT", .desc = "[EXT] Virtio" },
-	{.name = "SCP", .desc = "[EXT] Service Call" },
-	{.name = "IUC", .desc = "[EXT] IUCV" },
-	{.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling" },
-	{.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter" },
-	{.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt" },
-	{.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt" },
-	{.name = "DAS", .desc = "[I/O] DASD" },
-	{.name = "C15", .desc = "[I/O] 3215" },
-	{.name = "C70", .desc = "[I/O] 3270" },
-	{.name = "TAP", .desc = "[I/O] Tape" },
-	{.name = "VMR", .desc = "[I/O] Unit Record Devices" },
-	{.name = "LCS", .desc = "[I/O] LCS" },
-	{.name = "CLW", .desc = "[I/O] CLAW" },
-	{.name = "CTC", .desc = "[I/O] CTC" },
-	{.name = "APB", .desc = "[I/O] AP Bus" },
-	{.name = "CSC", .desc = "[I/O] CHSC Subchannel" },
-	{.name = "NMI", .desc = "[NMI] Machine Check" },
+	[EXTERNAL_INTERRUPT] = {.name = "EXT"},
+	[IO_INTERRUPT]	     = {.name = "I/O"},
+	[EXTINT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"},
+	[EXTINT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"},
+	[EXTINT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"},
+	[EXTINT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"},
+	[EXTINT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"},
+	[EXTINT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"},
+	[EXTINT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"},
+	[EXTINT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"},
+	[EXTINT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"},
+	[EXTINT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"},
+	[EXTINT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"},
+	[EXTINT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"},
+	[EXTINT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"},
+	[IOINT_CIO]  = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"},
+	[IOINT_QAI]  = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"},
+	[IOINT_DAS]  = {.name = "DAS", .desc = "[I/O] DASD"},
+	[IOINT_C15]  = {.name = "C15", .desc = "[I/O] 3215"},
+	[IOINT_C70]  = {.name = "C70", .desc = "[I/O] 3270"},
+	[IOINT_TAP]  = {.name = "TAP", .desc = "[I/O] Tape"},
+	[IOINT_VMR]  = {.name = "VMR", .desc = "[I/O] Unit Record Devices"},
+	[IOINT_LCS]  = {.name = "LCS", .desc = "[I/O] LCS"},
+	[IOINT_CLW]  = {.name = "CLW", .desc = "[I/O] CLAW"},
+	[IOINT_CTC]  = {.name = "CTC", .desc = "[I/O] CTC"},
+	[IOINT_APB]  = {.name = "APB", .desc = "[I/O] AP Bus"},
+	[IOINT_ADM]  = {.name = "ADM", .desc = "[I/O] EADM Subchannel"},
+	[IOINT_CSC]  = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"},
+	[NMI_NMI]    = {.name = "NMI", .desc = "[NMI] Machine Check"},
 };
 
 /*
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 8aa634f5944b..d1c7214e157c 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -547,7 +547,7 @@ static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 		 */
 		entry = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
 		if (entry) {
-			regs->psw.addr = entry->fixup | PSW_ADDR_AMODE;
+			regs->psw.addr = extable_fixup(entry) | PSW_ADDR_AMODE;
 			return 1;
 		}
 
diff --git a/arch/s390/kernel/lgr.c b/arch/s390/kernel/lgr.c
index eca94e74d19a..6ea6d69339b5 100644
--- a/arch/s390/kernel/lgr.c
+++ b/arch/s390/kernel/lgr.c
@@ -51,16 +51,6 @@ static struct lgr_info lgr_info_cur;
 static struct debug_info *lgr_dbf;
 
 /*
- * Return number of valid stsi levels
- */
-static inline int stsi_0(void)
-{
-	int rc = stsi(NULL, 0, 0, 0);
-
-	return rc == -ENOSYS ? rc : (((unsigned int) rc) >> 28);
-}
-
-/*
  * Copy buffer and then convert it to ASCII
  */
 static void cpascii(char *dst, char *src, int size)
@@ -76,7 +66,7 @@ static void lgr_stsi_1_1_1(struct lgr_info *lgr_info)
 {
 	struct sysinfo_1_1_1 *si = (void *) lgr_page;
 
-	if (stsi(si, 1, 1, 1) == -ENOSYS)
+	if (stsi(si, 1, 1, 1))
 		return;
 	cpascii(lgr_info->manufacturer, si->manufacturer,
 		sizeof(si->manufacturer));
@@ -93,7 +83,7 @@ static void lgr_stsi_2_2_2(struct lgr_info *lgr_info)
 {
 	struct sysinfo_2_2_2 *si = (void *) lgr_page;
 
-	if (stsi(si, 2, 2, 2) == -ENOSYS)
+	if (stsi(si, 2, 2, 2))
 		return;
 	cpascii(lgr_info->name, si->name, sizeof(si->name));
 	memcpy(&lgr_info->lpar_number, &si->lpar_number,
@@ -108,7 +98,7 @@ static void lgr_stsi_3_2_2(struct lgr_info *lgr_info)
 	struct sysinfo_3_2_2 *si = (void *) lgr_page;
 	int i;
 
-	if (stsi(si, 3, 2, 2) == -ENOSYS)
+	if (stsi(si, 3, 2, 2))
 		return;
 	for (i = 0; i < min_t(u8, si->count, VM_LEVEL_MAX); i++) {
 		cpascii(lgr_info->vm[i].name, si->vm[i].name,
@@ -124,16 +114,17 @@ static void lgr_stsi_3_2_2(struct lgr_info *lgr_info)
  */
 static void lgr_info_get(struct lgr_info *lgr_info)
 {
+	int level;
+
 	memset(lgr_info, 0, sizeof(*lgr_info));
 	stfle(lgr_info->stfle_fac_list, ARRAY_SIZE(lgr_info->stfle_fac_list));
-	lgr_info->level = stsi_0();
-	if (lgr_info->level == -ENOSYS)
-		return;
-	if (lgr_info->level >= 1)
+	level = stsi(NULL, 0, 0, 0);
+	lgr_info->level = level;
+	if (level >= 1)
 		lgr_stsi_1_1_1(lgr_info);
-	if (lgr_info->level >= 2)
+	if (level >= 2)
 		lgr_stsi_2_2_2(lgr_info);
-	if (lgr_info->level >= 3)
+	if (level >= 3)
 		lgr_stsi_3_2_2(lgr_info);
 }
 
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index 493304bdf1c7..b3de27700016 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -21,6 +21,7 @@
 #include <asm/reset.h>
 #include <asm/ipl.h>
 #include <asm/diag.h>
+#include <asm/elf.h>
 #include <asm/asm-offsets.h>
 #include <asm/os_info.h>
 
@@ -31,8 +32,6 @@ extern const unsigned long long relocate_kernel_len;
 
 #ifdef CONFIG_CRASH_DUMP
 
-void *fill_cpu_elf_notes(void *ptr, struct save_area *sa);
-
 /*
  * Create ELF notes for one CPU
  */
@@ -159,7 +158,7 @@ int machine_kexec_prepare(struct kimage *image)
 
 	/* Can't replace kernel image since it is read-only. */
 	if (ipl_flags & IPL_NSS_VALID)
-		return -ENOSYS;
+		return -EOPNOTSUPP;
 
 	if (image->type == KEXEC_TYPE_CRASH)
 		return machine_kexec_prepare_kdump();
@@ -191,6 +190,10 @@ void machine_shutdown(void)
 {
 }
 
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
 /*
  * Do normal kexec
  */
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 733175373a4c..5024be27df44 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -26,10 +26,12 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/vtimer.h>
+#include <asm/exec.h>
 #include <asm/irq.h>
 #include <asm/nmi.h>
 #include <asm/smp.h>
 #include <asm/switch_to.h>
+#include <asm/runtime_instr.h>
 #include "entry.h"
 
 asmlinkage void ret_from_fork(void) asm ("ret_from_fork");
@@ -132,6 +134,7 @@ EXPORT_SYMBOL(kernel_thread);
  */
 void exit_thread(void)
 {
+	exit_thread_runtime_instr();
 }
 
 void flush_thread(void)
@@ -170,6 +173,11 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	/* Save access registers to new thread structure. */
 	save_access_regs(&p->thread.acrs[0]);
 
+	/* Don't copy runtime instrumentation info */
+	p->thread.ri_cb = NULL;
+	p->thread.ri_signum = 0;
+	frame->childregs.psw.mask &= ~PSW_MASK_RI;
+
 #ifndef CONFIG_64BIT
 	/*
 	 * save fprs to current->thread.fp_regs to merge them with
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 572d4c9cb33b..753c41d0ffd3 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -39,9 +39,9 @@ void __cpuinit cpu_init(void)
  */
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
-	static const char *hwcap_str[10] = {
+	static const char *hwcap_str[] = {
 		"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
-		"edat", "etf3eh", "highgprs"
+		"edat", "etf3eh", "highgprs", "te"
 	};
 	unsigned long n = (unsigned long) v - 1;
 	int i;
@@ -54,10 +54,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			   num_online_cpus(), loops_per_jiffy/(500000/HZ),
 			   (loops_per_jiffy/(5000/HZ))%100);
 		seq_puts(m, "features\t: ");
-		for (i = 0; i < 10; i++)
+		for (i = 0; i < ARRAY_SIZE(hwcap_str); i++)
 			if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
 				seq_printf(m, "%s ", hwcap_str[i]);
 		seq_puts(m, "\n");
+		show_cacheinfo(m);
 	}
 	get_online_cpus();
 	if (cpu_online(n)) {
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index f4eb37680b91..a314c57f4e94 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -42,6 +42,7 @@ enum s390_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
 	REGSET_LAST_BREAK,
+	REGSET_TDB,
 	REGSET_SYSTEM_CALL,
 	REGSET_GENERAL_EXTENDED,
 };
@@ -52,6 +53,22 @@ void update_per_regs(struct task_struct *task)
 	struct thread_struct *thread = &task->thread;
 	struct per_regs old, new;
 
+#ifdef CONFIG_64BIT
+	/* Take care of the enable/disable of transactional execution. */
+	if (MACHINE_HAS_TE) {
+		unsigned long cr0, cr0_new;
+
+		__ctl_store(cr0, 0, 0);
+		/* set or clear transaction execution bits 8 and 9. */
+		if (task->thread.per_flags & PER_FLAG_NO_TE)
+			cr0_new = cr0 & ~(3UL << 54);
+		else
+			cr0_new = cr0 | (3UL << 54);
+		/* Only load control register 0 if necessary. */
+		if (cr0 != cr0_new)
+			__ctl_load(cr0_new, 0, 0);
+	}
+#endif
 	/* Copy user specified PER registers */
 	new.control = thread->per_user.control;
 	new.start = thread->per_user.start;
@@ -60,6 +77,10 @@ void update_per_regs(struct task_struct *task)
 	/* merge TIF_SINGLE_STEP into user specified PER registers. */
 	if (test_tsk_thread_flag(task, TIF_SINGLE_STEP)) {
 		new.control |= PER_EVENT_IFETCH;
+#ifdef CONFIG_64BIT
+		new.control |= PER_CONTROL_SUSPENSION;
+		new.control |= PER_EVENT_TRANSACTION_END;
+#endif
 		new.start = 0;
 		new.end = PSW_ADDR_INSN;
 	}
@@ -100,6 +121,7 @@ void ptrace_disable(struct task_struct *task)
 	memset(&task->thread.per_event, 0, sizeof(task->thread.per_event));
 	clear_tsk_thread_flag(task, TIF_SINGLE_STEP);
 	clear_tsk_thread_flag(task, TIF_PER_TRAP);
+	task->thread.per_flags = 0;
 }
 
 #ifndef CONFIG_64BIT
@@ -416,6 +438,16 @@ long arch_ptrace(struct task_struct *child, long request,
 		put_user(task_thread_info(child)->last_break,
 			 (unsigned long __user *) data);
 		return 0;
+	case PTRACE_ENABLE_TE:
+		if (!MACHINE_HAS_TE)
+			return -EIO;
+		child->thread.per_flags &= ~PER_FLAG_NO_TE;
+		return 0;
+	case PTRACE_DISABLE_TE:
+		if (!MACHINE_HAS_TE)
+			return -EIO;
+		child->thread.per_flags |= PER_FLAG_NO_TE;
+		return 0;
 	default:
 		/* Removing high order bit from addr (only for 31 bit). */
 		addr &= PSW_ADDR_INSN;
@@ -719,7 +751,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 	long ret = 0;
 
 	/* Do the secure computing check first. */
-	secure_computing_strict(regs->gprs[2]);
+	if (secure_computing(regs->gprs[2])) {
+		/* seccomp failures shouldn't expose any additional code. */
+		ret = -1;
+		goto out;
+	}
 
 	/*
 	 * The sysc_tracesys code in entry.S stored the system
@@ -745,6 +781,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 			    regs->gprs[2], regs->orig_gpr2,
 			    regs->gprs[3], regs->gprs[4],
 			    regs->gprs[5]);
+out:
 	return ret ?: regs->gprs[2];
 }
 
@@ -898,6 +935,28 @@ static int s390_last_break_set(struct task_struct *target,
 	return 0;
 }
 
+static int s390_tdb_get(struct task_struct *target,
+			const struct user_regset *regset,
+			unsigned int pos, unsigned int count,
+			void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	unsigned char *data;
+
+	if (!(regs->int_code & 0x200))
+		return -ENODATA;
+	data = target->thread.trap_tdb;
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, data, 0, 256);
+}
+
+static int s390_tdb_set(struct task_struct *target,
+			const struct user_regset *regset,
+			unsigned int pos, unsigned int count,
+			const void *kbuf, const void __user *ubuf)
+{
+	return 0;
+}
+
 #endif
 
 static int s390_system_call_get(struct task_struct *target,
@@ -946,6 +1005,14 @@ static const struct user_regset s390_regsets[] = {
 		.get = s390_last_break_get,
 		.set = s390_last_break_set,
 	},
+	[REGSET_TDB] = {
+		.core_note_type = NT_S390_TDB,
+		.n = 1,
+		.size = 256,
+		.align = 1,
+		.get = s390_tdb_get,
+		.set = s390_tdb_set,
+	},
 #endif
 	[REGSET_SYSTEM_CALL] = {
 		.core_note_type = NT_S390_SYSTEM_CALL,
@@ -1143,6 +1210,14 @@ static const struct user_regset s390_compat_regsets[] = {
 		.get = s390_compat_last_break_get,
 		.set = s390_compat_last_break_set,
 	},
+	[REGSET_TDB] = {
+		.core_note_type = NT_S390_TDB,
+		.n = 1,
+		.size = 256,
+		.align = 1,
+		.get = s390_tdb_get,
+		.set = s390_tdb_set,
+	},
 	[REGSET_SYSTEM_CALL] = {
 		.core_note_type = NT_S390_SYSTEM_CALL,
 		.n = 1,
diff --git a/arch/s390/kernel/runtime_instr.c b/arch/s390/kernel/runtime_instr.c
new file mode 100644
index 000000000000..61066f6f71a5
--- /dev/null
+++ b/arch/s390/kernel/runtime_instr.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright IBM Corp. 2012
+ * Author(s): Jan Glauber <jang@linux.vnet.ibm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <asm/runtime_instr.h>
+#include <asm/cpu_mf.h>
+#include <asm/irq.h>
+
+/* empty control block to disable RI by loading it */
+struct runtime_instr_cb runtime_instr_empty_cb;
+
+static int runtime_instr_avail(void)
+{
+	return test_facility(64);
+}
+
+static void disable_runtime_instr(void)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+
+	load_runtime_instr_cb(&runtime_instr_empty_cb);
+
+	/*
+	 * Make sure the RI bit is deleted from the PSW. If the user did not
+	 * switch off RI before the system call the process will get a
+	 * specification exception otherwise.
+	 */
+	regs->psw.mask &= ~PSW_MASK_RI;
+}
+
+static void init_runtime_instr_cb(struct runtime_instr_cb *cb)
+{
+	cb->buf_limit = 0xfff;
+	if (s390_user_mode == HOME_SPACE_MODE)
+		cb->home_space = 1;
+	cb->int_requested = 1;
+	cb->pstate = 1;
+	cb->pstate_set_buf = 1;
+	cb->pstate_sample = 1;
+	cb->pstate_collect = 1;
+	cb->key = PAGE_DEFAULT_KEY;
+	cb->valid = 1;
+}
+
+void exit_thread_runtime_instr(void)
+{
+	struct task_struct *task = current;
+
+	if (!task->thread.ri_cb)
+		return;
+	disable_runtime_instr();
+	kfree(task->thread.ri_cb);
+	task->thread.ri_signum = 0;
+	task->thread.ri_cb = NULL;
+}
+
+static void runtime_instr_int_handler(struct ext_code ext_code,
+				unsigned int param32, unsigned long param64)
+{
+	struct siginfo info;
+
+	if (!(param32 & CPU_MF_INT_RI_MASK))
+		return;
+
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_CMR]++;
+
+	if (!current->thread.ri_cb)
+		return;
+	if (current->thread.ri_signum < SIGRTMIN ||
+	    current->thread.ri_signum > SIGRTMAX) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+
+	memset(&info, 0, sizeof(info));
+	info.si_signo = current->thread.ri_signum;
+	info.si_code = SI_QUEUE;
+	if (param32 & CPU_MF_INT_RI_BUF_FULL)
+		info.si_int = ENOBUFS;
+	else if (param32 & CPU_MF_INT_RI_HALTED)
+		info.si_int = ECANCELED;
+	else
+		return; /* unknown reason */
+
+	send_sig_info(current->thread.ri_signum, &info, current);
+}
+
+SYSCALL_DEFINE2(s390_runtime_instr, int, command, int, signum)
+{
+	struct runtime_instr_cb *cb;
+
+	if (!runtime_instr_avail())
+		return -EOPNOTSUPP;
+
+	if (command == S390_RUNTIME_INSTR_STOP) {
+		preempt_disable();
+		exit_thread_runtime_instr();
+		preempt_enable();
+		return 0;
+	}
+
+	if (command != S390_RUNTIME_INSTR_START ||
+	    (signum < SIGRTMIN || signum > SIGRTMAX))
+		return -EINVAL;
+
+	if (!current->thread.ri_cb) {
+		cb = kzalloc(sizeof(*cb), GFP_KERNEL);
+		if (!cb)
+			return -ENOMEM;
+	} else {
+		cb = current->thread.ri_cb;
+		memset(cb, 0, sizeof(*cb));
+	}
+
+	init_runtime_instr_cb(cb);
+	current->thread.ri_signum = signum;
+
+	/* now load the control block to make it available */
+	preempt_disable();
+	current->thread.ri_cb = cb;
+	load_runtime_instr_cb(cb);
+	preempt_enable();
+	return 0;
+}
+
+static int __init runtime_instr_init(void)
+{
+	int rc;
+
+	if (!runtime_instr_avail())
+		return 0;
+
+	measurement_alert_subclass_register();
+	rc = register_external_interrupt(0x1407, runtime_instr_int_handler);
+	if (rc)
+		measurement_alert_subclass_unregister();
+	else
+		pr_info("Runtime instrumentation facility initialized\n");
+	return rc;
+}
+device_initcall(runtime_instr_init);
diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c
index 57b536649b00..9bdbcef1da9e 100644
--- a/arch/s390/kernel/s390_ksyms.c
+++ b/arch/s390/kernel/s390_ksyms.c
@@ -8,3 +8,5 @@ EXPORT_SYMBOL(_mcount);
 #if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
 EXPORT_SYMBOL(sie64a);
 #endif
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index f86c81e13c37..afa9fdba200e 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -302,10 +302,10 @@ static int __init parse_vmalloc(char *arg)
 }
 early_param("vmalloc", parse_vmalloc);
 
-unsigned int addressing_mode = HOME_SPACE_MODE;
-EXPORT_SYMBOL_GPL(addressing_mode);
+unsigned int s390_user_mode = PRIMARY_SPACE_MODE;
+EXPORT_SYMBOL_GPL(s390_user_mode);
 
-static int set_amode_primary(void)
+static void __init set_user_mode_primary(void)
 {
 	psw_kernel_bits = (psw_kernel_bits & ~PSW_MASK_ASC) | PSW_ASC_HOME;
 	psw_user_bits = (psw_user_bits & ~PSW_MASK_ASC) | PSW_ASC_PRIMARY;
@@ -313,48 +313,30 @@ static int set_amode_primary(void)
 	psw32_user_bits =
 		(psw32_user_bits & ~PSW32_MASK_ASC) | PSW32_ASC_PRIMARY;
 #endif
-
-	if (MACHINE_HAS_MVCOS) {
-		memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess));
-		return 1;
-	} else {
-		memcpy(&uaccess, &uaccess_pt, sizeof(uaccess));
-		return 0;
-	}
-}
-
-/*
- * Switch kernel/user addressing modes?
- */
-static int __init early_parse_switch_amode(char *p)
-{
-	addressing_mode = PRIMARY_SPACE_MODE;
-	return 0;
+	uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos_switch : uaccess_pt;
 }
-early_param("switch_amode", early_parse_switch_amode);
 
 static int __init early_parse_user_mode(char *p)
 {
 	if (p && strcmp(p, "primary") == 0)
-		addressing_mode = PRIMARY_SPACE_MODE;
+		s390_user_mode = PRIMARY_SPACE_MODE;
 	else if (!p || strcmp(p, "home") == 0)
-		addressing_mode = HOME_SPACE_MODE;
+		s390_user_mode = HOME_SPACE_MODE;
 	else
 		return 1;
 	return 0;
 }
 early_param("user_mode", early_parse_user_mode);
 
-static void setup_addressing_mode(void)
+static void __init setup_addressing_mode(void)
 {
-	if (addressing_mode == PRIMARY_SPACE_MODE) {
-		if (set_amode_primary())
-			pr_info("Address spaces switched, "
-				"mvcos available\n");
-		else
-			pr_info("Address spaces switched, "
-				"mvcos not available\n");
-	}
+	if (s390_user_mode != PRIMARY_SPACE_MODE)
+		return;
+	set_user_mode_primary();
+	if (MACHINE_HAS_MVCOS)
+		pr_info("Address spaces switched, mvcos available\n");
+	else
+		pr_info("Address spaces switched, mvcos not available\n");
 }
 
 void *restart_stack __attribute__((__section__(".data")));
@@ -602,9 +584,7 @@ static void __init setup_memory_end(void)
 
 static void __init setup_vmcoreinfo(void)
 {
-#ifdef CONFIG_KEXEC
 	mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note());
-#endif
 }
 
 #ifdef CONFIG_CRASH_DUMP
@@ -974,12 +954,20 @@ static void __init setup_hwcaps(void)
 	if (MACHINE_HAS_HPAGE)
 		elf_hwcap |= HWCAP_S390_HPAGE;
 
+#if defined(CONFIG_64BIT)
 	/*
 	 * 64-bit register support for 31-bit processes
 	 * HWCAP_S390_HIGH_GPRS is bit 9.
 	 */
 	elf_hwcap |= HWCAP_S390_HIGH_GPRS;
 
+	/*
+	 * Transactional execution support HWCAP_S390_TE is bit 10.
+	 */
+	if (test_facility(50) && test_facility(73))
+		elf_hwcap |= HWCAP_S390_TE;
+#endif
+
 	get_cpu_id(&cpu_id);
 	switch (cpu_id.machine) {
 	case 0x9672:
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 720fda1620f2..ea431e551c6b 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -66,7 +66,7 @@ struct pcpu {
 	unsigned long panic_stack;	/* panic stack for the cpu */
 	unsigned long ec_mask;		/* bit mask for ec_xxx functions */
 	int state;			/* physical cpu state */
-	u32 status;			/* last status received via sigp */
+	int polarization;		/* physical polarization */
 	u16 address;			/* physical cpu address */
 };
 
@@ -74,6 +74,10 @@ static u8 boot_cpu_type;
 static u16 boot_cpu_address;
 static struct pcpu pcpu_devices[NR_CPUS];
 
+/*
+ * The smp_cpu_state_mutex must be held when changing the state or polarization
+ * member of a pcpu data structure within the pcpu_devices arreay.
+ */
 DEFINE_MUTEX(smp_cpu_state_mutex);
 
 /*
@@ -99,7 +103,7 @@ static inline int __pcpu_sigp_relax(u16 addr, u8 order, u32 parm, u32 *status)
 	int cc;
 
 	while (1) {
-		cc = __pcpu_sigp(addr, order, parm, status);
+		cc = __pcpu_sigp(addr, order, parm, NULL);
 		if (cc != SIGP_CC_BUSY)
 			return cc;
 		cpu_relax();
@@ -111,7 +115,7 @@ static int pcpu_sigp_retry(struct pcpu *pcpu, u8 order, u32 parm)
 	int cc, retry;
 
 	for (retry = 0; ; retry++) {
-		cc = __pcpu_sigp(pcpu->address, order, parm, &pcpu->status);
+		cc = __pcpu_sigp(pcpu->address, order, parm, NULL);
 		if (cc != SIGP_CC_BUSY)
 			break;
 		if (retry >= 3)
@@ -122,16 +126,18 @@ static int pcpu_sigp_retry(struct pcpu *pcpu, u8 order, u32 parm)
 
 static inline int pcpu_stopped(struct pcpu *pcpu)
 {
+	u32 uninitialized_var(status);
+
 	if (__pcpu_sigp(pcpu->address, SIGP_SENSE,
-			0, &pcpu->status) != SIGP_CC_STATUS_STORED)
+			0, &status) != SIGP_CC_STATUS_STORED)
 		return 0;
-	return !!(pcpu->status & (SIGP_STATUS_CHECK_STOP|SIGP_STATUS_STOPPED));
+	return !!(status & (SIGP_STATUS_CHECK_STOP|SIGP_STATUS_STOPPED));
 }
 
 static inline int pcpu_running(struct pcpu *pcpu)
 {
 	if (__pcpu_sigp(pcpu->address, SIGP_SENSE_RUNNING,
-			0, &pcpu->status) != SIGP_CC_STATUS_STORED)
+			0, NULL) != SIGP_CC_STATUS_STORED)
 		return 1;
 	/* Status stored condition code is equivalent to cpu not running. */
 	return 0;
@@ -586,6 +592,16 @@ static inline void smp_get_save_area(int cpu, u16 address) { }
 
 #endif /* CONFIG_ZFCPDUMP || CONFIG_CRASH_DUMP */
 
+void smp_cpu_set_polarization(int cpu, int val)
+{
+	pcpu_devices[cpu].polarization = val;
+}
+
+int smp_cpu_get_polarization(int cpu)
+{
+	return pcpu_devices[cpu].polarization;
+}
+
 static struct sclp_cpu_info *smp_get_cpu_info(void)
 {
 	static int use_sigp_detection;
@@ -628,7 +644,7 @@ static int __devinit __smp_rescan_cpus(struct sclp_cpu_info *info,
 		pcpu->address = info->cpu[i].address;
 		pcpu->state = (cpu >= info->configured) ?
 			CPU_STATE_STANDBY : CPU_STATE_CONFIGURED;
-		cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
+		smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
 		set_cpu_present(cpu, true);
 		if (sysfs_add && smp_add_present_cpu(cpu) != 0)
 			set_cpu_present(cpu, false);
@@ -796,7 +812,7 @@ void __init smp_prepare_boot_cpu(void)
 	pcpu->async_stack = S390_lowcore.async_stack - ASYNC_SIZE;
 	pcpu->panic_stack = S390_lowcore.panic_stack - PAGE_SIZE;
 	S390_lowcore.percpu_offset = __per_cpu_offset[0];
-	cpu_set_polarization(0, POLARIZATION_UNKNOWN);
+	smp_cpu_set_polarization(0, POLARIZATION_UNKNOWN);
 	set_cpu_present(0, true);
 	set_cpu_online(0, true);
 }
@@ -862,7 +878,7 @@ static ssize_t cpu_configure_store(struct device *dev,
 		if (rc)
 			break;
 		pcpu->state = CPU_STATE_STANDBY;
-		cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
+		smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
 		topology_expect_change();
 		break;
 	case 1:
@@ -872,7 +888,7 @@ static ssize_t cpu_configure_store(struct device *dev,
 		if (rc)
 			break;
 		pcpu->state = CPU_STATE_CONFIGURED;
-		cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
+		smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
 		topology_expect_change();
 		break;
 	default:
@@ -959,23 +975,17 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self,
 	struct device *s = &c->dev;
 	int err = 0;
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
 		err = sysfs_create_group(&s->kobj, &cpu_online_attr_group);
 		break;
 	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
 		sysfs_remove_group(&s->kobj, &cpu_online_attr_group);
 		break;
 	}
 	return notifier_from_errno(err);
 }
 
-static struct notifier_block __cpuinitdata smp_cpu_nb = {
-	.notifier_call = smp_cpu_notify,
-};
-
 static int __devinit smp_add_present_cpu(int cpu)
 {
 	struct cpu *c = &pcpu_devices[cpu].cpu;
@@ -1050,7 +1060,7 @@ static int __init s390_smp_init(void)
 {
 	int cpu, rc;
 
-	register_cpu_notifier(&smp_cpu_nb);
+	hotcpu_notifier(smp_cpu_notify, 0);
 #ifdef CONFIG_HOTPLUG_CPU
 	rc = device_create_file(cpu_subsys.dev_root, &dev_attr_rescan);
 	if (rc)
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index b4a29eee41b8..d0964d22adb5 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -81,11 +81,12 @@ SYSCALL_DEFINE1(s390_personality, unsigned int, personality)
 {
 	unsigned int ret;
 
-	if (current->personality == PER_LINUX32 && personality == PER_LINUX)
-		personality = PER_LINUX32;
+	if (personality(current->personality) == PER_LINUX32 &&
+	    personality(personality) == PER_LINUX)
+		personality |= PER_LINUX32;
 	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	if (personality(ret) == PER_LINUX32)
+		ret &= ~PER_LINUX32;
 
 	return ret;
 }
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index bcab2f04ba58..48174850f3b0 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -350,3 +350,5 @@ SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
 SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
 SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
 SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)
+SYSCALL(sys_ni_syscall,sys_s390_runtime_instr,sys_s390_runtime_instr_wrapper)
+SYSCALL(sys_kcmp,sys_kcmp,sys_kcmp_wrapper)
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index fa0eb238dac7..62f89d98e880 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -22,17 +22,41 @@
 #include <math-emu/soft-fp.h>
 #include <math-emu/single.h>
 
-static inline int stsi_0(void)
+int topology_max_mnest;
+
+/*
+ * stsi - store system information
+ *
+ * Returns the current configuration level if function code 0 was specified.
+ * Otherwise returns 0 on success or a negative value on error.
+ */
+int stsi(void *sysinfo, int fc, int sel1, int sel2)
 {
-	int rc = stsi(NULL, 0, 0, 0);
-	return rc == -ENOSYS ? rc : (((unsigned int) rc) >> 28);
+	register int r0 asm("0") = (fc << 28) | sel1;
+	register int r1 asm("1") = sel2;
+	int rc = 0;
+
+	asm volatile(
+		"	stsi	0(%3)\n"
+		"0:	jz	2f\n"
+		"1:	lhi	%1,%4\n"
+		"2:\n"
+		EX_TABLE(0b, 1b)
+		: "+d" (r0), "+d" (rc)
+		: "d" (r1), "a" (sysinfo), "K" (-EOPNOTSUPP)
+		: "cc", "memory");
+	if (rc)
+		return rc;
+	return fc ? 0 : ((unsigned int) r0) >> 28;
 }
+EXPORT_SYMBOL(stsi);
 
-static int stsi_1_1_1(struct sysinfo_1_1_1 *info, char *page, int len)
+static void stsi_1_1_1(struct seq_file *m, struct sysinfo_1_1_1 *info)
 {
-	if (stsi(info, 1, 1, 1) == -ENOSYS)
-		return len;
+	int i;
 
+	if (stsi(info, 1, 1, 1))
+		return;
 	EBCASC(info->manufacturer, sizeof(info->manufacturer));
 	EBCASC(info->type, sizeof(info->type));
 	EBCASC(info->model, sizeof(info->model));
@@ -41,242 +65,197 @@ static int stsi_1_1_1(struct sysinfo_1_1_1 *info, char *page, int len)
 	EBCASC(info->model_capacity, sizeof(info->model_capacity));
 	EBCASC(info->model_perm_cap, sizeof(info->model_perm_cap));
 	EBCASC(info->model_temp_cap, sizeof(info->model_temp_cap));
-	len += sprintf(page + len, "Manufacturer:         %-16.16s\n",
-		       info->manufacturer);
-	len += sprintf(page + len, "Type:                 %-4.4s\n",
-		       info->type);
+	seq_printf(m, "Manufacturer:         %-16.16s\n", info->manufacturer);
+	seq_printf(m, "Type:                 %-4.4s\n", info->type);
+	/*
+	 * Sigh: the model field has been renamed with System z9
+	 * to model_capacity and a new model field has been added
+	 * after the plant field. To avoid confusing older programs
+	 * the "Model:" prints "model_capacity model" or just
+	 * "model_capacity" if the model string is empty .
+	 */
+	seq_printf(m, "Model:                %-16.16s", info->model_capacity);
 	if (info->model[0] != '\0')
-		/*
-		 * Sigh: the model field has been renamed with System z9
-		 * to model_capacity and a new model field has been added
-		 * after the plant field. To avoid confusing older programs
-		 * the "Model:" prints "model_capacity model" or just
-		 * "model_capacity" if the model string is empty .
-		 */
-		len += sprintf(page + len,
-			       "Model:                %-16.16s %-16.16s\n",
-			       info->model_capacity, info->model);
-	else
-		len += sprintf(page + len, "Model:                %-16.16s\n",
-			       info->model_capacity);
-	len += sprintf(page + len, "Sequence Code:        %-16.16s\n",
-		       info->sequence);
-	len += sprintf(page + len, "Plant:                %-4.4s\n",
-		       info->plant);
-	len += sprintf(page + len, "Model Capacity:       %-16.16s %08u\n",
-		       info->model_capacity, *(u32 *) info->model_cap_rating);
-	if (info->model_perm_cap[0] != '\0')
-		len += sprintf(page + len,
-			       "Model Perm. Capacity: %-16.16s %08u\n",
-			       info->model_perm_cap,
-			       *(u32 *) info->model_perm_cap_rating);
-	if (info->model_temp_cap[0] != '\0')
-		len += sprintf(page + len,
-			       "Model Temp. Capacity: %-16.16s %08u\n",
-			       info->model_temp_cap,
-			       *(u32 *) info->model_temp_cap_rating);
+		seq_printf(m, " %-16.16s", info->model);
+	seq_putc(m, '\n');
+	seq_printf(m, "Sequence Code:        %-16.16s\n", info->sequence);
+	seq_printf(m, "Plant:                %-4.4s\n", info->plant);
+	seq_printf(m, "Model Capacity:       %-16.16s %08u\n",
+		   info->model_capacity, info->model_cap_rating);
+	if (info->model_perm_cap_rating)
+		seq_printf(m, "Model Perm. Capacity: %-16.16s %08u\n",
+			   info->model_perm_cap,
+			   info->model_perm_cap_rating);
+	if (info->model_temp_cap_rating)
+		seq_printf(m, "Model Temp. Capacity: %-16.16s %08u\n",
+			   info->model_temp_cap,
+			   info->model_temp_cap_rating);
+	if (info->ncr)
+		seq_printf(m, "Nominal Cap. Rating:  %08u\n", info->ncr);
+	if (info->npr)
+		seq_printf(m, "Nominal Perm. Rating: %08u\n", info->npr);
+	if (info->ntr)
+		seq_printf(m, "Nominal Temp. Rating: %08u\n", info->ntr);
 	if (info->cai) {
-		len += sprintf(page + len,
-			       "Capacity Adj. Ind.:   %d\n",
-			       info->cai);
-		len += sprintf(page + len, "Capacity Ch. Reason:  %d\n",
-			       info->ccr);
+		seq_printf(m, "Capacity Adj. Ind.:   %d\n", info->cai);
+		seq_printf(m, "Capacity Ch. Reason:  %d\n", info->ccr);
+		seq_printf(m, "Capacity Transient:   %d\n", info->t);
+	}
+	if (info->p) {
+		for (i = 1; i <= ARRAY_SIZE(info->typepct); i++) {
+			seq_printf(m, "Type %d Percentage:    %d\n",
+				   i, info->typepct[i - 1]);
+		}
 	}
-	return len;
 }
 
-static int stsi_15_1_x(struct sysinfo_15_1_x *info, char *page, int len)
+static void stsi_15_1_x(struct seq_file *m, struct sysinfo_15_1_x *info)
 {
 	static int max_mnest;
 	int i, rc;
 
-	len += sprintf(page + len, "\n");
+	seq_putc(m, '\n');
 	if (!MACHINE_HAS_TOPOLOGY)
-		return len;
-	if (max_mnest) {
-		stsi(info, 15, 1, max_mnest);
-	} else {
-		for (max_mnest = 6; max_mnest > 1; max_mnest--) {
-			rc = stsi(info, 15, 1, max_mnest);
-			if (rc != -ENOSYS)
-				break;
-		}
-	}
-	len += sprintf(page + len, "CPU Topology HW:     ");
+		return;
+	if (stsi(info, 15, 1, topology_max_mnest))
+		return;
+	seq_printf(m, "CPU Topology HW:     ");
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
-		len += sprintf(page + len, " %d", info->mag[i]);
-	len += sprintf(page + len, "\n");
+		seq_printf(m, " %d", info->mag[i]);
+	seq_putc(m, '\n');
 #ifdef CONFIG_SCHED_MC
 	store_topology(info);
-	len += sprintf(page + len, "CPU Topology SW:     ");
+	seq_printf(m, "CPU Topology SW:     ");
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
-		len += sprintf(page + len, " %d", info->mag[i]);
-	len += sprintf(page + len, "\n");
+		seq_printf(m, " %d", info->mag[i]);
+	seq_putc(m, '\n');
 #endif
-	return len;
 }
 
-static int stsi_1_2_2(struct sysinfo_1_2_2 *info, char *page, int len)
+static void stsi_1_2_2(struct seq_file *m, struct sysinfo_1_2_2 *info)
 {
 	struct sysinfo_1_2_2_extension *ext;
 	int i;
 
-	if (stsi(info, 1, 2, 2) == -ENOSYS)
-		return len;
+	if (stsi(info, 1, 2, 2))
+		return;
 	ext = (struct sysinfo_1_2_2_extension *)
 		((unsigned long) info + info->acc_offset);
-
-	len += sprintf(page + len, "CPUs Total:           %d\n",
-		       info->cpus_total);
-	len += sprintf(page + len, "CPUs Configured:      %d\n",
-		       info->cpus_configured);
-	len += sprintf(page + len, "CPUs Standby:         %d\n",
-		       info->cpus_standby);
-	len += sprintf(page + len, "CPUs Reserved:        %d\n",
-		       info->cpus_reserved);
-
-	if (info->format == 1) {
-		/*
-		 * Sigh 2. According to the specification the alternate
-		 * capability field is a 32 bit floating point number
-		 * if the higher order 8 bits are not zero. Printing
-		 * a floating point number in the kernel is a no-no,
-		 * always print the number as 32 bit unsigned integer.
-		 * The user-space needs to know about the strange
-		 * encoding of the alternate cpu capability.
-		 */
-		len += sprintf(page + len, "Capability:           %u %u\n",
-			       info->capability, ext->alt_capability);
-		for (i = 2; i <= info->cpus_total; i++)
-			len += sprintf(page + len,
-				       "Adjustment %02d-way:    %u %u\n",
-				       i, info->adjustment[i-2],
-				       ext->alt_adjustment[i-2]);
-
-	} else {
-		len += sprintf(page + len, "Capability:           %u\n",
-			       info->capability);
-		for (i = 2; i <= info->cpus_total; i++)
-			len += sprintf(page + len,
-				       "Adjustment %02d-way:    %u\n",
-				       i, info->adjustment[i-2]);
+	seq_printf(m, "CPUs Total:           %d\n", info->cpus_total);
+	seq_printf(m, "CPUs Configured:      %d\n", info->cpus_configured);
+	seq_printf(m, "CPUs Standby:         %d\n", info->cpus_standby);
+	seq_printf(m, "CPUs Reserved:        %d\n", info->cpus_reserved);
+	/*
+	 * Sigh 2. According to the specification the alternate
+	 * capability field is a 32 bit floating point number
+	 * if the higher order 8 bits are not zero. Printing
+	 * a floating point number in the kernel is a no-no,
+	 * always print the number as 32 bit unsigned integer.
+	 * The user-space needs to know about the strange
+	 * encoding of the alternate cpu capability.
+	 */
+	seq_printf(m, "Capability:           %u", info->capability);
+	if (info->format == 1)
+		seq_printf(m, " %u", ext->alt_capability);
+	seq_putc(m, '\n');
+	if (info->nominal_cap)
+		seq_printf(m, "Nominal Capability:   %d\n", info->nominal_cap);
+	if (info->secondary_cap)
+		seq_printf(m, "Secondary Capability: %d\n", info->secondary_cap);
+	for (i = 2; i <= info->cpus_total; i++) {
+		seq_printf(m, "Adjustment %02d-way:    %u",
+			   i, info->adjustment[i-2]);
+		if (info->format == 1)
+			seq_printf(m, " %u", ext->alt_adjustment[i-2]);
+		seq_putc(m, '\n');
 	}
-
-	if (info->secondary_capability != 0)
-		len += sprintf(page + len, "Secondary Capability: %d\n",
-			       info->secondary_capability);
-	return len;
 }
 
-static int stsi_2_2_2(struct sysinfo_2_2_2 *info, char *page, int len)
+static void stsi_2_2_2(struct seq_file *m, struct sysinfo_2_2_2 *info)
 {
-	if (stsi(info, 2, 2, 2) == -ENOSYS)
-		return len;
-
+	if (stsi(info, 2, 2, 2))
+		return;
 	EBCASC(info->name, sizeof(info->name));
-
-	len += sprintf(page + len, "\n");
-	len += sprintf(page + len, "LPAR Number:          %d\n",
-		       info->lpar_number);
-
-	len += sprintf(page + len, "LPAR Characteristics: ");
+	seq_putc(m, '\n');
+	seq_printf(m, "LPAR Number:          %d\n", info->lpar_number);
+	seq_printf(m, "LPAR Characteristics: ");
 	if (info->characteristics & LPAR_CHAR_DEDICATED)
-		len += sprintf(page + len, "Dedicated ");
+		seq_printf(m, "Dedicated ");
 	if (info->characteristics & LPAR_CHAR_SHARED)
-		len += sprintf(page + len, "Shared ");
+		seq_printf(m, "Shared ");
 	if (info->characteristics & LPAR_CHAR_LIMITED)
-		len += sprintf(page + len, "Limited ");
-	len += sprintf(page + len, "\n");
-
-	len += sprintf(page + len, "LPAR Name:            %-8.8s\n",
-		       info->name);
-
-	len += sprintf(page + len, "LPAR Adjustment:      %d\n",
-		       info->caf);
-
-	len += sprintf(page + len, "LPAR CPUs Total:      %d\n",
-		       info->cpus_total);
-	len += sprintf(page + len, "LPAR CPUs Configured: %d\n",
-		       info->cpus_configured);
-	len += sprintf(page + len, "LPAR CPUs Standby:    %d\n",
-		       info->cpus_standby);
-	len += sprintf(page + len, "LPAR CPUs Reserved:   %d\n",
-		       info->cpus_reserved);
-	len += sprintf(page + len, "LPAR CPUs Dedicated:  %d\n",
-		       info->cpus_dedicated);
-	len += sprintf(page + len, "LPAR CPUs Shared:     %d\n",
-		       info->cpus_shared);
-	return len;
+		seq_printf(m, "Limited ");
+	seq_putc(m, '\n');
+	seq_printf(m, "LPAR Name:            %-8.8s\n", info->name);
+	seq_printf(m, "LPAR Adjustment:      %d\n", info->caf);
+	seq_printf(m, "LPAR CPUs Total:      %d\n", info->cpus_total);
+	seq_printf(m, "LPAR CPUs Configured: %d\n", info->cpus_configured);
+	seq_printf(m, "LPAR CPUs Standby:    %d\n", info->cpus_standby);
+	seq_printf(m, "LPAR CPUs Reserved:   %d\n", info->cpus_reserved);
+	seq_printf(m, "LPAR CPUs Dedicated:  %d\n", info->cpus_dedicated);
+	seq_printf(m, "LPAR CPUs Shared:     %d\n", info->cpus_shared);
 }
 
-static int stsi_3_2_2(struct sysinfo_3_2_2 *info, char *page, int len)
+static void stsi_3_2_2(struct seq_file *m, struct sysinfo_3_2_2 *info)
 {
 	int i;
 
-	if (stsi(info, 3, 2, 2) == -ENOSYS)
-		return len;
+	if (stsi(info, 3, 2, 2))
+		return;
 	for (i = 0; i < info->count; i++) {
 		EBCASC(info->vm[i].name, sizeof(info->vm[i].name));
 		EBCASC(info->vm[i].cpi, sizeof(info->vm[i].cpi));
-		len += sprintf(page + len, "\n");
-		len += sprintf(page + len, "VM%02d Name:            %-8.8s\n",
-			       i, info->vm[i].name);
-		len += sprintf(page + len, "VM%02d Control Program: %-16.16s\n",
-			       i, info->vm[i].cpi);
-
-		len += sprintf(page + len, "VM%02d Adjustment:      %d\n",
-			       i, info->vm[i].caf);
-
-		len += sprintf(page + len, "VM%02d CPUs Total:      %d\n",
-			       i, info->vm[i].cpus_total);
-		len += sprintf(page + len, "VM%02d CPUs Configured: %d\n",
-			       i, info->vm[i].cpus_configured);
-		len += sprintf(page + len, "VM%02d CPUs Standby:    %d\n",
-			       i, info->vm[i].cpus_standby);
-		len += sprintf(page + len, "VM%02d CPUs Reserved:   %d\n",
-			       i, info->vm[i].cpus_reserved);
+		seq_putc(m, '\n');
+		seq_printf(m, "VM%02d Name:            %-8.8s\n", i, info->vm[i].name);
+		seq_printf(m, "VM%02d Control Program: %-16.16s\n", i, info->vm[i].cpi);
+		seq_printf(m, "VM%02d Adjustment:      %d\n", i, info->vm[i].caf);
+		seq_printf(m, "VM%02d CPUs Total:      %d\n", i, info->vm[i].cpus_total);
+		seq_printf(m, "VM%02d CPUs Configured: %d\n", i, info->vm[i].cpus_configured);
+		seq_printf(m, "VM%02d CPUs Standby:    %d\n", i, info->vm[i].cpus_standby);
+		seq_printf(m, "VM%02d CPUs Reserved:   %d\n", i, info->vm[i].cpus_reserved);
 	}
-	return len;
 }
 
-static int proc_read_sysinfo(char *page, char **start,
-			     off_t off, int count,
-			     int *eof, void *data)
+static int sysinfo_show(struct seq_file *m, void *v)
 {
-	unsigned long info = get_zeroed_page(GFP_KERNEL);
-	int level, len;
+	void *info = (void *)get_zeroed_page(GFP_KERNEL);
+	int level;
 
 	if (!info)
 		return 0;
-
-	len = 0;
-	level = stsi_0();
+	level = stsi(NULL, 0, 0, 0);
 	if (level >= 1)
-		len = stsi_1_1_1((struct sysinfo_1_1_1 *) info, page, len);
-
+		stsi_1_1_1(m, info);
 	if (level >= 1)
-		len = stsi_15_1_x((struct sysinfo_15_1_x *) info, page, len);
-
+		stsi_15_1_x(m, info);
 	if (level >= 1)
-		len = stsi_1_2_2((struct sysinfo_1_2_2 *) info, page, len);
-
+		stsi_1_2_2(m, info);
 	if (level >= 2)
-		len = stsi_2_2_2((struct sysinfo_2_2_2 *) info, page, len);
-
+		stsi_2_2_2(m, info);
 	if (level >= 3)
-		len = stsi_3_2_2((struct sysinfo_3_2_2 *) info, page, len);
+		stsi_3_2_2(m, info);
+	free_page((unsigned long)info);
+	return 0;
+}
 
-	free_page(info);
-	return len;
+static int sysinfo_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sysinfo_show, NULL);
 }
 
-static __init int create_proc_sysinfo(void)
+static const struct file_operations sysinfo_fops = {
+	.open		= sysinfo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init sysinfo_create_proc(void)
 {
-	create_proc_read_entry("sysinfo", 0444, NULL,
-			       proc_read_sysinfo, NULL);
+	proc_create("sysinfo", 0444, NULL, &sysinfo_fops);
 	return 0;
 }
-device_initcall(create_proc_sysinfo);
+device_initcall(sysinfo_create_proc);
 
 /*
  * Service levels interface.
@@ -407,7 +386,7 @@ void s390_adjust_jiffies(void)
 	if (!info)
 		return;
 
-	if (stsi(info, 1, 2, 2) != -ENOSYS) {
+	if (stsi(info, 1, 2, 2) == 0) {
 		/*
 		 * Major sigh. The cpu capability encoding is "special".
 		 * If the first 9 bits of info->capability are 0 then it
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index dcec960fc724..2db1011b8b19 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -329,7 +329,7 @@ static unsigned long clock_sync_flags;
  * The synchronous get_clock function. It will write the current clock
  * value to the clock pointer and return 0 if the clock is in sync with
  * the external time source. If the clock mode is local it will return
- * -ENOSYS and -EAGAIN if the clock is not in sync with the external
+ * -EOPNOTSUPP and -EAGAIN if the clock is not in sync with the external
  * reference.
  */
 int get_sync_clock(unsigned long long *clock)
@@ -347,7 +347,7 @@ int get_sync_clock(unsigned long long *clock)
 		return 0;
 	if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags) &&
 	    !test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
-		return -ENOSYS;
+		return -EOPNOTSUPP;
 	if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags) &&
 	    !test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
 		return -EACCES;
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 05151e06c388..54d93f4b6818 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -17,6 +17,7 @@
 #include <linux/cpu.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
+#include <asm/sysinfo.h>
 
 #define PTF_HORIZONTAL	(0UL)
 #define PTF_VERTICAL	(1UL)
@@ -44,9 +45,6 @@ static struct mask_info book_info;
 cpumask_t cpu_book_map[NR_CPUS];
 unsigned char cpu_book_id[NR_CPUS];
 
-/* smp_cpu_state_mutex must be held when accessing this array */
-int cpu_polarization[NR_CPUS];
-
 static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu)
 {
 	cpumask_t mask;
@@ -75,10 +73,7 @@ static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
 {
 	unsigned int cpu;
 
-	for (cpu = find_first_bit(&tl_cpu->mask[0], TOPOLOGY_CPU_BITS);
-	     cpu < TOPOLOGY_CPU_BITS;
-	     cpu = find_next_bit(&tl_cpu->mask[0], TOPOLOGY_CPU_BITS, cpu + 1))
-	{
+	for_each_set_bit(cpu, &tl_cpu->mask[0], TOPOLOGY_CPU_BITS) {
 		unsigned int rcpu;
 		int lcpu;
 
@@ -94,7 +89,7 @@ static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
 			} else {
 				cpu_core_id[lcpu] = core->id;
 			}
-			cpu_set_polarization(lcpu, tl_cpu->pp);
+			smp_cpu_set_polarization(lcpu, tl_cpu->pp);
 		}
 	}
 	return core;
@@ -201,7 +196,7 @@ static void topology_update_polarization_simple(void)
 
 	mutex_lock(&smp_cpu_state_mutex);
 	for_each_possible_cpu(cpu)
-		cpu_set_polarization(cpu, POLARIZATION_HRZ);
+		smp_cpu_set_polarization(cpu, POLARIZATION_HRZ);
 	mutex_unlock(&smp_cpu_state_mutex);
 }
 
@@ -231,7 +226,7 @@ int topology_set_cpu_management(int fc)
 	if (rc)
 		return -EBUSY;
 	for_each_possible_cpu(cpu)
-		cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
+		smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
 	return rc;
 }
 
@@ -250,12 +245,10 @@ static void update_cpu_core_map(void)
 
 void store_topology(struct sysinfo_15_1_x *info)
 {
-	int rc;
-
-	rc = stsi(info, 15, 1, 3);
-	if (rc != -ENOSYS)
-		return;
-	stsi(info, 15, 1, 2);
+	if (topology_max_mnest >= 3)
+		stsi(info, 15, 1, 3);
+	else
+		stsi(info, 15, 1, 2);
 }
 
 int arch_update_cpu_topology(void)
@@ -415,7 +408,7 @@ static ssize_t cpu_polarization_show(struct device *dev,
 	ssize_t count;
 
 	mutex_lock(&smp_cpu_state_mutex);
-	switch (cpu_read_polarization(cpu)) {
+	switch (smp_cpu_get_polarization(cpu)) {
 	case POLARIZATION_HRZ:
 		count = sprintf(buf, "horizontal\n");
 		break;
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 01775c04a90e..3d2b0fa37db0 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -57,6 +57,23 @@ static int kstack_depth_to_print = 12;
 static int kstack_depth_to_print = 20;
 #endif /* CONFIG_64BIT */
 
+static inline void __user *get_trap_ip(struct pt_regs *regs)
+{
+#ifdef CONFIG_64BIT
+	unsigned long address;
+
+	if (regs->int_code & 0x200)
+		address = *(unsigned long *)(current->thread.trap_tdb + 24);
+	else
+		address = regs->psw.addr;
+	return (void __user *)
+		((address - (regs->int_code >> 16)) & PSW_ADDR_INSN);
+#else
+	return (void __user *)
+		((regs->psw.addr - (regs->int_code >> 16)) & PSW_ADDR_INSN);
+#endif
+}
+
 /*
  * For show_trace we have tree different stack to consider:
  *   - the panic stack which is used if the kernel stack has overflown
@@ -214,7 +231,6 @@ void show_registers(struct pt_regs *regs)
 
 void show_regs(struct pt_regs *regs)
 {
-	print_modules();
 	printk("CPU: %d %s %s %.*s\n",
 	       task_thread_info(current)->cpu, print_tainted(),
 	       init_utsname()->release,
@@ -254,6 +270,7 @@ void die(struct pt_regs *regs, const char *str)
 #endif
 	printk("\n");
 	notify_die(DIE_OOPS, str, regs, 0, regs->int_code & 0xffff, SIGSEGV);
+	print_modules();
 	show_regs(regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
@@ -285,12 +302,6 @@ int is_valid_bugaddr(unsigned long addr)
 	return 1;
 }
 
-static inline void __user *get_psw_address(struct pt_regs *regs)
-{
-	return (void __user *)
-		((regs->psw.addr - (regs->int_code >> 16)) & PSW_ADDR_INSN);
-}
-
 static void __kprobes do_trap(struct pt_regs *regs,
 			      int si_signo, int si_code, char *str)
 {
@@ -304,14 +315,14 @@ static void __kprobes do_trap(struct pt_regs *regs,
 		info.si_signo = si_signo;
 		info.si_errno = 0;
 		info.si_code = si_code;
-		info.si_addr = get_psw_address(regs);
+		info.si_addr = get_trap_ip(regs);
 		force_sig_info(si_signo, &info, current);
 		report_user_fault(regs, si_signo);
         } else {
                 const struct exception_table_entry *fixup;
                 fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
                 if (fixup)
-                        regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
+			regs->psw.addr = extable_fixup(fixup) | PSW_ADDR_AMODE;
 		else {
 			enum bug_trap_type btt;
 
@@ -381,6 +392,11 @@ DO_ERROR_INFO(special_op_exception, SIGILL, ILL_ILLOPN,
 DO_ERROR_INFO(translation_exception, SIGILL, ILL_ILLOPN,
 	      "translation exception")
 
+#ifdef CONFIG_64BIT
+DO_ERROR_INFO(transaction_exception, SIGILL, ILL_ILLOPN,
+	      "transaction constraint exception")
+#endif
+
 static inline void do_fp_trap(struct pt_regs *regs, int fpc)
 {
 	int si_code = 0;
@@ -408,7 +424,7 @@ static void __kprobes illegal_op(struct pt_regs *regs)
 	__u16 __user *location;
 	int signal = 0;
 
-	location = get_psw_address(regs);
+	location = get_trap_ip(regs);
 
 	if (user_mode(regs)) {
 		if (get_user(*((__u16 *) opcode), (__u16 __user *) location))
@@ -476,7 +492,7 @@ void specification_exception(struct pt_regs *regs)
 	__u16 __user *location = NULL;
 	int signal = 0;
 
-	location = (__u16 __user *) get_psw_address(regs);
+	location = (__u16 __user *) get_trap_ip(regs);
 
 	if (user_mode(regs)) {
 		get_user(*((__u16 *) opcode), location);
@@ -525,7 +541,7 @@ static void data_exception(struct pt_regs *regs)
 	__u16 __user *location;
 	int signal = 0;
 
-	location = get_psw_address(regs);
+	location = get_trap_ip(regs);
 
 	if (MACHINE_HAS_IEEE)
 		asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc));
@@ -641,6 +657,7 @@ void __init trap_init(void)
         pgm_check_table[0x12] = &translation_exception;
         pgm_check_table[0x13] = &special_op_exception;
 #ifdef CONFIG_64BIT
+	pgm_check_table[0x18] = &transaction_exception;
 	pgm_check_table[0x38] = &do_asce_exception;
 	pgm_check_table[0x39] = &do_dat_exception;
 	pgm_check_table[0x3A] = &do_dat_exception;
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 9a19ca367c17..d7776281cb60 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -85,7 +85,7 @@ struct vdso_data *vdso_data = &vdso_data_store.data;
 static void vdso_init_data(struct vdso_data *vd)
 {
 	vd->ectg_available =
-		addressing_mode != HOME_SPACE_MODE && test_facility(31);
+		s390_user_mode != HOME_SPACE_MODE && test_facility(31);
 }
 
 #ifdef CONFIG_64BIT
@@ -102,7 +102,7 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore)
 
 	lowcore->vdso_per_cpu_data = __LC_PASTE;
 
-	if (addressing_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
 		return 0;
 
 	segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER);
@@ -147,7 +147,7 @@ void vdso_free_per_cpu(struct _lowcore *lowcore)
 	unsigned long segment_table, page_table, page_frame;
 	u32 *psal, *aste;
 
-	if (addressing_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
 		return;
 
 	psal = (u32 *)(addr_t) lowcore->paste[4];
@@ -165,7 +165,7 @@ static void vdso_init_cr5(void)
 {
 	unsigned long cr5;
 
-	if (addressing_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
 		return;
 	cr5 = offsetof(struct _lowcore, paste);
 	__ctl_load(cr5, 5, 5);
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 4fc97b40a6e1..790334427895 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -99,7 +99,7 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
 	return virt_timer_forward(user + system);
 }
 
-void account_vtime(struct task_struct *prev, struct task_struct *next)
+void vtime_task_switch(struct task_struct *prev)
 {
 	struct thread_info *ti;
 
@@ -107,7 +107,7 @@ void account_vtime(struct task_struct *prev, struct task_struct *next)
 	ti = task_thread_info(prev);
 	ti->user_timer = S390_lowcore.user_timer;
 	ti->system_timer = S390_lowcore.system_timer;
-	ti = task_thread_info(next);
+	ti = task_thread_info(current);
 	S390_lowcore.user_timer = ti->user_timer;
 	S390_lowcore.system_timer = ti->system_timer;
 }
@@ -122,7 +122,7 @@ void account_process_tick(struct task_struct *tsk, int user_tick)
  * Update process times based on virtual cpu times stored by entry.S
  * to the lowcore fields user_timer, system_timer & steal_clock.
  */
-void account_system_vtime(struct task_struct *tsk)
+void vtime_account(struct task_struct *tsk)
 {
 	struct thread_info *ti = task_thread_info(tsk);
 	u64 timer, system;
@@ -138,7 +138,7 @@ void account_system_vtime(struct task_struct *tsk)
 
 	virt_timer_forward(system);
 }
-EXPORT_SYMBOL_GPL(account_system_vtime);
+EXPORT_SYMBOL_GPL(vtime_account);
 
 void __kprobes vtime_stop_cpu(void)
 {
@@ -378,9 +378,8 @@ static int __cpuinit s390_nohz_notify(struct notifier_block *self,
 	long cpu = (long) hcpu;
 
 	idle = &per_cpu(s390_idle, cpu);
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_DYING:
-	case CPU_DYING_FROZEN:
 		idle->nohz_delay = 0;
 	default:
 		break;
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 78eb9847008f..b58dd869cb32 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -5,7 +5,7 @@ source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	def_bool y
-	prompt "Virtualization"
+	prompt "KVM"
 	---help---
 	  Say Y here to get to see options for using your Linux host to run other
 	  operating systems inside virtual machines (guests).
@@ -21,6 +21,7 @@ config KVM
 	depends on HAVE_KVM && EXPERIMENTAL
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	---help---
 	  Support hosting paravirtualized guest machines using the SIE
 	  virtualization capability on the mainframe. This should work
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index c88bb7793390..a390687feb13 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -14,6 +14,8 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include "kvm-s390.h"
+#include "trace.h"
+#include "trace-s390.h"
 
 static int diag_release_pages(struct kvm_vcpu *vcpu)
 {
@@ -98,6 +100,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu)
 	vcpu->run->exit_reason = KVM_EXIT_S390_RESET;
 	VCPU_EVENT(vcpu, 3, "requesting userspace resets %llx",
 	  vcpu->run->s390_reset_flags);
+	trace_kvm_s390_request_resets(vcpu->run->s390_reset_flags);
 	return -EREMOTE;
 }
 
@@ -105,6 +108,7 @@ int kvm_s390_handle_diag(struct kvm_vcpu *vcpu)
 {
 	int code = (vcpu->arch.sie_block->ipb & 0xfff0000) >> 16;
 
+	trace_kvm_s390_handle_diag(vcpu, code);
 	switch (code) {
 	case 0x10:
 		return diag_release_pages(vcpu);
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index adae539f12e2..22798ec33fd1 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -19,6 +19,8 @@
 
 #include "kvm-s390.h"
 #include "gaccess.h"
+#include "trace.h"
+#include "trace-s390.h"
 
 static int handle_lctlg(struct kvm_vcpu *vcpu)
 {
@@ -45,6 +47,7 @@ static int handle_lctlg(struct kvm_vcpu *vcpu)
 
 	VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
+	trace_kvm_s390_handle_lctl(vcpu, 1, reg1, reg3, useraddr);
 
 	do {
 		rc = get_guest_u64(vcpu, useraddr,
@@ -82,6 +85,7 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
 
 	VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
+	trace_kvm_s390_handle_lctl(vcpu, 0, reg1, reg3, useraddr);
 
 	reg = reg1;
 	do {
@@ -135,6 +139,8 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 	vcpu->stat.exit_stop_request++;
 	spin_lock_bh(&vcpu->arch.local_int.lock);
 
+	trace_kvm_s390_stop_request(vcpu->arch.local_int.action_bits);
+
 	if (vcpu->arch.local_int.action_bits & ACTION_RELOADVCPU_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_RELOADVCPU_ON_STOP;
 		rc = SIE_INTERCEPT_RERUNVCPU;
@@ -171,6 +177,7 @@ static int handle_validity(struct kvm_vcpu *vcpu)
 	int rc;
 
 	vcpu->stat.exit_validity++;
+	trace_kvm_s390_intercept_validity(vcpu, viwhy);
 	if (viwhy == 0x37) {
 		vmaddr = gmap_fault(vcpu->arch.sie_block->prefix,
 				    vcpu->arch.gmap);
@@ -213,6 +220,9 @@ static int handle_instruction(struct kvm_vcpu *vcpu)
 	intercept_handler_t handler;
 
 	vcpu->stat.exit_instruction++;
+	trace_kvm_s390_intercept_instruction(vcpu,
+					     vcpu->arch.sie_block->ipa,
+					     vcpu->arch.sie_block->ipb);
 	handler = instruction_handlers[vcpu->arch.sie_block->ipa >> 8];
 	if (handler)
 		return handler(vcpu);
@@ -222,6 +232,7 @@ static int handle_instruction(struct kvm_vcpu *vcpu)
 static int handle_prog(struct kvm_vcpu *vcpu)
 {
 	vcpu->stat.exit_program_interruption++;
+	trace_kvm_s390_intercept_prog(vcpu, vcpu->arch.sie_block->iprcc);
 	return kvm_s390_inject_program_int(vcpu, vcpu->arch.sie_block->iprcc);
 }
 
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index b7bc1aac8ed2..ff1e2f8ef94a 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -19,6 +19,7 @@
 #include <asm/uaccess.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
+#include "trace-s390.h"
 
 static int psw_extint_disabled(struct kvm_vcpu *vcpu)
 {
@@ -130,6 +131,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	case KVM_S390_INT_EMERGENCY:
 		VCPU_EVENT(vcpu, 4, "%s", "interrupt: sigp emerg");
 		vcpu->stat.deliver_emergency_signal++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 inti->emerg.code, 0);
 		rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x1201);
 		if (rc == -EFAULT)
 			exception = 1;
@@ -152,6 +155,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	case KVM_S390_INT_EXTERNAL_CALL:
 		VCPU_EVENT(vcpu, 4, "%s", "interrupt: sigp ext call");
 		vcpu->stat.deliver_external_call++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 inti->extcall.code, 0);
 		rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x1202);
 		if (rc == -EFAULT)
 			exception = 1;
@@ -175,6 +180,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 		VCPU_EVENT(vcpu, 4, "interrupt: sclp parm:%x",
 			   inti->ext.ext_params);
 		vcpu->stat.deliver_service_signal++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 inti->ext.ext_params, 0);
 		rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x2401);
 		if (rc == -EFAULT)
 			exception = 1;
@@ -198,6 +205,9 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 		VCPU_EVENT(vcpu, 4, "interrupt: virtio parm:%x,parm64:%llx",
 			   inti->ext.ext_params, inti->ext.ext_params2);
 		vcpu->stat.deliver_virtio_interrupt++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 inti->ext.ext_params,
+						 inti->ext.ext_params2);
 		rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x2603);
 		if (rc == -EFAULT)
 			exception = 1;
@@ -229,6 +239,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	case KVM_S390_SIGP_STOP:
 		VCPU_EVENT(vcpu, 4, "%s", "interrupt: cpu stop");
 		vcpu->stat.deliver_stop_signal++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 0, 0);
 		__set_intercept_indicator(vcpu, inti);
 		break;
 
@@ -236,12 +248,16 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 		VCPU_EVENT(vcpu, 4, "interrupt: set prefix to %x",
 			   inti->prefix.address);
 		vcpu->stat.deliver_prefix_signal++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 inti->prefix.address, 0);
 		kvm_s390_set_prefix(vcpu, inti->prefix.address);
 		break;
 
 	case KVM_S390_RESTART:
 		VCPU_EVENT(vcpu, 4, "%s", "interrupt: cpu restart");
 		vcpu->stat.deliver_restart_signal++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 0, 0);
 		rc = copy_to_guest(vcpu, offsetof(struct _lowcore,
 		  restart_old_psw), &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
 		if (rc == -EFAULT)
@@ -259,6 +275,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 			   inti->pgm.code,
 			   table[vcpu->arch.sie_block->ipa >> 14]);
 		vcpu->stat.deliver_program_int++;
+		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type,
+						 inti->pgm.code, 0);
 		rc = put_guest_u16(vcpu, __LC_PGM_INT_CODE, inti->pgm.code);
 		if (rc == -EFAULT)
 			exception = 1;
@@ -405,9 +423,7 @@ no_timer:
 		set_current_state(TASK_INTERRUPTIBLE);
 		spin_unlock_bh(&vcpu->arch.local_int.lock);
 		spin_unlock(&vcpu->arch.local_int.float_int->lock);
-		vcpu_put(vcpu);
 		schedule();
-		vcpu_load(vcpu);
 		spin_lock(&vcpu->arch.local_int.float_int->lock);
 		spin_lock_bh(&vcpu->arch.local_int.lock);
 	}
@@ -515,6 +531,7 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 	inti->pgm.code = code;
 
 	VCPU_EVENT(vcpu, 3, "inject: program check %d (from kernel)", code);
+	trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, inti->type, code, 0, 1);
 	spin_lock_bh(&li->lock);
 	list_add(&inti->list, &li->list);
 	atomic_set(&li->active, 1);
@@ -556,6 +573,8 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 		kfree(inti);
 		return -EINVAL;
 	}
+	trace_kvm_s390_inject_vm(s390int->type, s390int->parm, s390int->parm64,
+				 2);
 
 	mutex_lock(&kvm->lock);
 	fi = &kvm->arch.float_int;
@@ -621,6 +640,8 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 		kfree(inti);
 		return -EINVAL;
 	}
+	trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, s390int->type, s390int->parm,
+				   s390int->parm64, 2);
 
 	mutex_lock(&vcpu->kvm->lock);
 	li = &vcpu->arch.local_int;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index d470ccbfabae..ecced9d18986 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -32,6 +32,10 @@
 #include "kvm-s390.h"
 #include "gaccess.h"
 
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+#include "trace-s390.h"
+
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
@@ -242,6 +246,7 @@ out_err:
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	VCPU_EVENT(vcpu, 3, "%s", "free cpu");
+	trace_kvm_s390_destroy_vcpu(vcpu->vcpu_id);
 	if (!kvm_is_ucontrol(vcpu->kvm)) {
 		clear_bit(63 - vcpu->vcpu_id,
 			  (unsigned long *) &vcpu->kvm->arch.sca->mcn);
@@ -417,6 +422,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 		goto out_free_sie_block;
 	VM_EVENT(kvm, 3, "create cpu %d at %p, sie block at %p", id, vcpu,
 		 vcpu->arch.sie_block);
+	trace_kvm_s390_create_vcpu(id, vcpu, vcpu->arch.sie_block);
 
 	return vcpu;
 out_free_sie_block:
@@ -607,18 +613,22 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 	local_irq_enable();
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
+	trace_kvm_s390_sie_enter(vcpu,
+				 atomic_read(&vcpu->arch.sie_block->cpuflags));
 	rc = sie64a(vcpu->arch.sie_block, vcpu->run->s.regs.gprs);
 	if (rc) {
 		if (kvm_is_ucontrol(vcpu->kvm)) {
 			rc = SIE_INTERCEPT_UCONTROL;
 		} else {
 			VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
+			trace_kvm_s390_sie_fault(vcpu);
 			kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
 			rc = 0;
 		}
 	}
 	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
 		   vcpu->arch.sie_block->icptcode);
+	trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
 	local_irq_disable();
 	kvm_guest_exit();
 	local_irq_enable();
@@ -959,7 +969,12 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 	return;
 }
 
-void kvm_arch_flush_shadow(struct kvm *kvm)
+void kvm_arch_flush_shadow_all(struct kvm *kvm)
+{
+}
+
+void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
+				   struct kvm_memory_slot *slot)
 {
 }
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 60da903d6f3e..d768906f15c8 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -20,6 +20,7 @@
 #include <asm/sysinfo.h>
 #include "gaccess.h"
 #include "kvm-s390.h"
+#include "trace.h"
 
 static int handle_set_prefix(struct kvm_vcpu *vcpu)
 {
@@ -59,6 +60,7 @@ static int handle_set_prefix(struct kvm_vcpu *vcpu)
 	kvm_s390_set_prefix(vcpu, address);
 
 	VCPU_EVENT(vcpu, 5, "setting prefix to %x", address);
+	trace_kvm_s390_handle_prefix(vcpu, 1, address);
 out:
 	return 0;
 }
@@ -91,6 +93,7 @@ static int handle_store_prefix(struct kvm_vcpu *vcpu)
 	}
 
 	VCPU_EVENT(vcpu, 5, "storing prefix to %x", address);
+	trace_kvm_s390_handle_prefix(vcpu, 0, address);
 out:
 	return 0;
 }
@@ -119,6 +122,7 @@ static int handle_store_cpu_address(struct kvm_vcpu *vcpu)
 	}
 
 	VCPU_EVENT(vcpu, 5, "storing cpu address to %llx", useraddr);
+	trace_kvm_s390_handle_stap(vcpu, useraddr);
 out:
 	return 0;
 }
@@ -164,9 +168,11 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 			   &facility_list, sizeof(facility_list));
 	if (rc == -EFAULT)
 		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-	else
+	else {
 		VCPU_EVENT(vcpu, 5, "store facility list value %x",
 			   facility_list);
+		trace_kvm_s390_handle_stfl(vcpu, facility_list);
+	}
 	return 0;
 }
 
@@ -211,7 +217,7 @@ static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 	spin_unlock(&fi->lock);
 
 	/* deal with other level 3 hypervisors */
-	if (stsi(mem, 3, 2, 2) == -ENOSYS)
+	if (stsi(mem, 3, 2, 2))
 		mem->count = 0;
 	if (mem->count < 8)
 		mem->count++;
@@ -259,7 +265,7 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 		mem = get_zeroed_page(GFP_KERNEL);
 		if (!mem)
 			goto out_fail;
-		if (stsi((void *) mem, fc, sel1, sel2) == -ENOSYS)
+		if (stsi((void *) mem, fc, sel1, sel2))
 			goto out_mem;
 		break;
 	case 3:
@@ -278,6 +284,7 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
 		goto out_mem;
 	}
+	trace_kvm_s390_handle_stsi(vcpu, fc, sel1, sel2, operand2);
 	free_page(mem);
 	vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44);
 	vcpu->run->s.regs.gprs[0] = 0;
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 56f80e1f98f7..566ddf6e8dfb 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -18,6 +18,7 @@
 #include <asm/sigp.h>
 #include "gaccess.h"
 #include "kvm-s390.h"
+#include "trace.h"
 
 static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
 			u64 *reg)
@@ -344,6 +345,7 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 	else
 		parameter = vcpu->run->s.regs.gprs[r1 + 1];
 
+	trace_kvm_s390_handle_sigp(vcpu, order_code, cpu_addr, parameter);
 	switch (order_code) {
 	case SIGP_SENSE:
 		vcpu->stat.instruction_sigp_sense++;
diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h
new file mode 100644
index 000000000000..90fdf85b5ff7
--- /dev/null
+++ b/arch/s390/kvm/trace-s390.h
@@ -0,0 +1,210 @@
+#if !defined(_TRACE_KVMS390_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVMS390_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm-s390
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace-s390
+
+/*
+ * Trace point for the creation of the kvm instance.
+ */
+TRACE_EVENT(kvm_s390_create_vm,
+	    TP_PROTO(unsigned long type),
+	    TP_ARGS(type),
+
+	    TP_STRUCT__entry(
+		    __field(unsigned long, type)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->type = type;
+		    ),
+
+	    TP_printk("create vm%s",
+		      __entry->type & KVM_VM_S390_UCONTROL ? " (UCONTROL)" : "")
+	);
+
+/*
+ * Trace points for creation and destruction of vpcus.
+ */
+TRACE_EVENT(kvm_s390_create_vcpu,
+	    TP_PROTO(unsigned int id, struct kvm_vcpu *vcpu,
+		     struct kvm_s390_sie_block *sie_block),
+	    TP_ARGS(id, vcpu, sie_block),
+
+	    TP_STRUCT__entry(
+		    __field(unsigned int, id)
+		    __field(struct kvm_vcpu *, vcpu)
+		    __field(struct kvm_s390_sie_block *, sie_block)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->id = id;
+		    __entry->vcpu = vcpu;
+		    __entry->sie_block = sie_block;
+		    ),
+
+	    TP_printk("create cpu %d at %p, sie block at %p", __entry->id,
+		      __entry->vcpu, __entry->sie_block)
+	);
+
+TRACE_EVENT(kvm_s390_destroy_vcpu,
+	    TP_PROTO(unsigned int id),
+	    TP_ARGS(id),
+
+	    TP_STRUCT__entry(
+		    __field(unsigned int, id)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->id = id;
+		    ),
+
+	    TP_printk("destroy cpu %d", __entry->id)
+	);
+
+/*
+ * Trace points for injection of interrupts, either per machine or
+ * per vcpu.
+ */
+
+#define kvm_s390_int_type						\
+	{KVM_S390_SIGP_STOP, "sigp stop"},				\
+	{KVM_S390_PROGRAM_INT, "program interrupt"},			\
+	{KVM_S390_SIGP_SET_PREFIX, "sigp set prefix"},			\
+	{KVM_S390_RESTART, "sigp restart"},				\
+	{KVM_S390_INT_VIRTIO, "virtio interrupt"},			\
+	{KVM_S390_INT_SERVICE, "sclp interrupt"},			\
+	{KVM_S390_INT_EMERGENCY, "sigp emergency"},			\
+	{KVM_S390_INT_EXTERNAL_CALL, "sigp ext call"}
+
+TRACE_EVENT(kvm_s390_inject_vm,
+	    TP_PROTO(__u64 type, __u32 parm, __u64 parm64, int who),
+	    TP_ARGS(type, parm, parm64, who),
+
+	    TP_STRUCT__entry(
+		    __field(__u32, inttype)
+		    __field(__u32, parm)
+		    __field(__u64, parm64)
+		    __field(int, who)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->inttype = type & 0x00000000ffffffff;
+		    __entry->parm = parm;
+		    __entry->parm64 = parm64;
+		    __entry->who = who;
+		    ),
+
+	    TP_printk("inject%s: type:%x (%s) parm:%x parm64:%llx",
+		      (__entry->who == 1) ? " (from kernel)" :
+		      (__entry->who == 2) ? " (from user)" : "",
+		      __entry->inttype,
+		      __print_symbolic(__entry->inttype, kvm_s390_int_type),
+		      __entry->parm, __entry->parm64)
+	);
+
+TRACE_EVENT(kvm_s390_inject_vcpu,
+	    TP_PROTO(unsigned int id, __u64 type, __u32 parm, __u64 parm64, \
+		     int who),
+	    TP_ARGS(id, type, parm, parm64, who),
+
+	    TP_STRUCT__entry(
+		    __field(int, id)
+		    __field(__u32, inttype)
+		    __field(__u32, parm)
+		    __field(__u64, parm64)
+		    __field(int, who)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->id = id;
+		    __entry->inttype = type & 0x00000000ffffffff;
+		    __entry->parm = parm;
+		    __entry->parm64 = parm64;
+		    __entry->who = who;
+		    ),
+
+	    TP_printk("inject%s (vcpu %d): type:%x (%s) parm:%x parm64:%llx",
+		      (__entry->who == 1) ? " (from kernel)" :
+		      (__entry->who == 2) ? " (from user)" : "",
+		      __entry->id, __entry->inttype,
+		      __print_symbolic(__entry->inttype, kvm_s390_int_type),
+		      __entry->parm, __entry->parm64)
+	);
+
+/*
+ * Trace point for the actual delivery of interrupts.
+ */
+TRACE_EVENT(kvm_s390_deliver_interrupt,
+	    TP_PROTO(unsigned int id, __u64 type, __u32 data0, __u64 data1),
+	    TP_ARGS(id, type, data0, data1),
+
+	    TP_STRUCT__entry(
+		    __field(int, id)
+		    __field(__u32, inttype)
+		    __field(__u32, data0)
+		    __field(__u64, data1)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->id = id;
+		    __entry->inttype = type & 0x00000000ffffffff;
+		    __entry->data0 = data0;
+		    __entry->data1 = data1;
+		    ),
+
+	    TP_printk("deliver interrupt (vcpu %d): type:%x (%s) "	\
+		      "data:%08x %016llx",
+		      __entry->id, __entry->inttype,
+		      __print_symbolic(__entry->inttype, kvm_s390_int_type),
+		      __entry->data0, __entry->data1)
+	);
+
+/*
+ * Trace point for resets that may be requested from userspace.
+ */
+TRACE_EVENT(kvm_s390_request_resets,
+	    TP_PROTO(__u64 resets),
+	    TP_ARGS(resets),
+
+	    TP_STRUCT__entry(
+		    __field(__u64, resets)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->resets = resets;
+		    ),
+
+	    TP_printk("requesting userspace resets %llx",
+		      __entry->resets)
+	);
+
+/*
+ * Trace point for a vcpu's stop requests.
+ */
+TRACE_EVENT(kvm_s390_stop_request,
+	    TP_PROTO(unsigned int action_bits),
+	    TP_ARGS(action_bits),
+
+	    TP_STRUCT__entry(
+		    __field(unsigned int, action_bits)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->action_bits = action_bits;
+		    ),
+
+	    TP_printk("stop request, action_bits = %08x",
+		      __entry->action_bits)
+	);
+
+
+#endif /* _TRACE_KVMS390_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/s390/kvm/trace.h b/arch/s390/kvm/trace.h
new file mode 100644
index 000000000000..2b29e62351d3
--- /dev/null
+++ b/arch/s390/kvm/trace.h
@@ -0,0 +1,341 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+#include <asm/sigp.h>
+#include <asm/debug.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Helpers for vcpu-specific tracepoints containing the same information
+ * as s390dbf VCPU_EVENTs.
+ */
+#define VCPU_PROTO_COMMON struct kvm_vcpu *vcpu
+#define VCPU_ARGS_COMMON vcpu
+#define VCPU_FIELD_COMMON __field(int, id)			\
+	__field(unsigned long, pswmask)				\
+	__field(unsigned long, pswaddr)
+#define VCPU_ASSIGN_COMMON do {						\
+	__entry->id = vcpu->vcpu_id;					\
+	__entry->pswmask = vcpu->arch.sie_block->gpsw.mask;		\
+	__entry->pswaddr = vcpu->arch.sie_block->gpsw.addr;		\
+	} while (0);
+#define VCPU_TP_PRINTK(p_str, p_args...)				\
+	TP_printk("%02d[%016lx-%016lx]: " p_str, __entry->id,		\
+		  __entry->pswmask, __entry->pswaddr, p_args)
+
+/*
+ * Tracepoints for SIE entry and exit.
+ */
+TRACE_EVENT(kvm_s390_sie_enter,
+	    TP_PROTO(VCPU_PROTO_COMMON, int cpuflags),
+	    TP_ARGS(VCPU_ARGS_COMMON, cpuflags),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(int, cpuflags)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->cpuflags = cpuflags;
+		    ),
+
+	    VCPU_TP_PRINTK("entering sie flags %x", __entry->cpuflags)
+	);
+
+TRACE_EVENT(kvm_s390_sie_fault,
+	    TP_PROTO(VCPU_PROTO_COMMON),
+	    TP_ARGS(VCPU_ARGS_COMMON),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    ),
+
+	    VCPU_TP_PRINTK("%s", "fault in sie instruction")
+	);
+
+#define sie_intercept_code				\
+	{0x04, "Instruction"},				\
+	{0x08, "Program interruption"},			\
+	{0x0C, "Instruction and program interuption"},	\
+	{0x10, "External request"},			\
+	{0x14, "External interruption"},		\
+	{0x18, "I/O request"},				\
+	{0x1C, "Wait state"},				\
+	{0x20, "Validity"},				\
+	{0x28, "Stop request"}
+
+TRACE_EVENT(kvm_s390_sie_exit,
+	    TP_PROTO(VCPU_PROTO_COMMON, u8 icptcode),
+	    TP_ARGS(VCPU_ARGS_COMMON, icptcode),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(u8, icptcode)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->icptcode = icptcode;
+		    ),
+
+	    VCPU_TP_PRINTK("exit sie icptcode %d (%s)", __entry->icptcode,
+			   __print_symbolic(__entry->icptcode,
+					    sie_intercept_code))
+	);
+
+/*
+ * Trace point for intercepted instructions.
+ */
+TRACE_EVENT(kvm_s390_intercept_instruction,
+	    TP_PROTO(VCPU_PROTO_COMMON, __u16 ipa, __u32 ipb),
+	    TP_ARGS(VCPU_ARGS_COMMON, ipa, ipb),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(__u64, instruction)
+		    __field(char, insn[8])
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->instruction = ((__u64)ipa << 48) |
+		    ((__u64)ipb << 16);
+		    ),
+
+	    VCPU_TP_PRINTK("intercepted instruction %016llx (%s)",
+			   __entry->instruction,
+			   insn_to_mnemonic((unsigned char *)
+					    &__entry->instruction,
+					 __entry->insn) ?
+			   "unknown" : __entry->insn)
+	);
+
+/*
+ * Trace point for intercepted program interruptions.
+ */
+TRACE_EVENT(kvm_s390_intercept_prog,
+	    TP_PROTO(VCPU_PROTO_COMMON, __u16 code),
+	    TP_ARGS(VCPU_ARGS_COMMON, code),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(__u16, code)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->code = code;
+		    ),
+
+	    VCPU_TP_PRINTK("intercepted program interruption %04x",
+			   __entry->code)
+	);
+
+/*
+ * Trace point for validity intercepts.
+ */
+TRACE_EVENT(kvm_s390_intercept_validity,
+	    TP_PROTO(VCPU_PROTO_COMMON, __u16 viwhy),
+	    TP_ARGS(VCPU_ARGS_COMMON, viwhy),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(__u16, viwhy)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->viwhy = viwhy;
+		    ),
+
+	    VCPU_TP_PRINTK("got validity intercept %04x", __entry->viwhy)
+	);
+
+/*
+ * Trace points for instructions that are of special interest.
+ */
+
+#define sigp_order_codes					\
+	{SIGP_SENSE, "sense"},					\
+	{SIGP_EXTERNAL_CALL, "external call"},			\
+	{SIGP_EMERGENCY_SIGNAL, "emergency signal"},		\
+	{SIGP_STOP, "stop"},					\
+	{SIGP_STOP_AND_STORE_STATUS, "stop and store status"},	\
+	{SIGP_SET_ARCHITECTURE, "set architecture"},		\
+	{SIGP_SET_PREFIX, "set prefix"},			\
+	{SIGP_SENSE_RUNNING, "sense running"},			\
+	{SIGP_RESTART, "restart"}
+
+TRACE_EVENT(kvm_s390_handle_sigp,
+	    TP_PROTO(VCPU_PROTO_COMMON, __u8 order_code, __u16 cpu_addr, \
+		     __u32 parameter),
+	    TP_ARGS(VCPU_ARGS_COMMON, order_code, cpu_addr, parameter),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(__u8, order_code)
+		    __field(__u16, cpu_addr)
+		    __field(__u32, parameter)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->order_code = order_code;
+		    __entry->cpu_addr = cpu_addr;
+		    __entry->parameter = parameter;
+		    ),
+
+	    VCPU_TP_PRINTK("handle sigp order %02x (%s), cpu address %04x, " \
+			   "parameter %08x", __entry->order_code,
+			   __print_symbolic(__entry->order_code,
+					    sigp_order_codes),
+			   __entry->cpu_addr, __entry->parameter)
+	);
+
+#define diagnose_codes				\
+	{0x10, "release pages"},		\
+	{0x44, "time slice end"},		\
+	{0x308, "ipl functions"},		\
+	{0x500, "kvm hypercall"},		\
+	{0x501, "kvm breakpoint"}
+
+TRACE_EVENT(kvm_s390_handle_diag,
+	    TP_PROTO(VCPU_PROTO_COMMON, __u16 code),
+	    TP_ARGS(VCPU_ARGS_COMMON, code),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(__u16, code)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->code = code;
+		    ),
+
+	    VCPU_TP_PRINTK("handle diagnose call %04x (%s)", __entry->code,
+			   __print_symbolic(__entry->code, diagnose_codes))
+	);
+
+TRACE_EVENT(kvm_s390_handle_lctl,
+	    TP_PROTO(VCPU_PROTO_COMMON, int g, int reg1, int reg3, u64 addr),
+	    TP_ARGS(VCPU_ARGS_COMMON, g, reg1, reg3, addr),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(int, g)
+		    __field(int, reg1)
+		    __field(int, reg3)
+		    __field(u64, addr)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->g = g;
+		    __entry->reg1 = reg1;
+		    __entry->reg3 = reg3;
+		    __entry->addr = addr;
+		    ),
+
+	    VCPU_TP_PRINTK("%s: loading cr %x-%x from %016llx",
+			   __entry->g ? "lctlg" : "lctl",
+			   __entry->reg1, __entry->reg3, __entry->addr)
+	);
+
+TRACE_EVENT(kvm_s390_handle_prefix,
+	    TP_PROTO(VCPU_PROTO_COMMON, int set, u32 address),
+	    TP_ARGS(VCPU_ARGS_COMMON, set, address),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(int, set)
+		    __field(u32, address)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->set = set;
+		    __entry->address = address;
+		    ),
+
+	    VCPU_TP_PRINTK("%s prefix to %08x",
+			   __entry->set ? "setting" : "storing",
+			   __entry->address)
+	);
+
+TRACE_EVENT(kvm_s390_handle_stap,
+	    TP_PROTO(VCPU_PROTO_COMMON, u64 address),
+	    TP_ARGS(VCPU_ARGS_COMMON, address),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(u64, address)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->address = address;
+		    ),
+
+	    VCPU_TP_PRINTK("storing cpu address to %016llx",
+			   __entry->address)
+	);
+
+TRACE_EVENT(kvm_s390_handle_stfl,
+	    TP_PROTO(VCPU_PROTO_COMMON, unsigned int facility_list),
+	    TP_ARGS(VCPU_ARGS_COMMON, facility_list),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(unsigned int, facility_list)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->facility_list = facility_list;
+		    ),
+
+	    VCPU_TP_PRINTK("store facility list value %08x",
+			   __entry->facility_list)
+	);
+
+TRACE_EVENT(kvm_s390_handle_stsi,
+	    TP_PROTO(VCPU_PROTO_COMMON, int fc, int sel1, int sel2, u64 addr),
+	    TP_ARGS(VCPU_ARGS_COMMON, fc, sel1, sel2, addr),
+
+	    TP_STRUCT__entry(
+		    VCPU_FIELD_COMMON
+		    __field(int, fc)
+		    __field(int, sel1)
+		    __field(int, sel2)
+		    __field(u64, addr)
+		    ),
+
+	    TP_fast_assign(
+		    VCPU_ASSIGN_COMMON
+		    __entry->fc = fc;
+		    __entry->sel1 = sel1;
+		    __entry->sel2 = sel2;
+		    __entry->addr = addr;
+		    ),
+
+	    VCPU_TP_PRINTK("STSI %d.%d.%d information stored to %016llx",
+			   __entry->fc, __entry->sel1, __entry->sel2,
+			   __entry->addr)
+	);
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 761ab8b56afc..6ab0d0b5cec8 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -4,6 +4,7 @@
 
 lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
 obj-y += usercopy.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o mem32.o
+obj-$(CONFIG_64BIT) += mem64.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/mem32.S b/arch/s390/lib/mem32.S
new file mode 100644
index 000000000000..14ca9244b615
--- /dev/null
+++ b/arch/s390/lib/mem32.S
@@ -0,0 +1,92 @@
+/*
+ * String handling functions.
+ *
+ * Copyright IBM Corp. 2012
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * memset implementation
+ *
+ * This code corresponds to the C construct below. We do distinguish
+ * between clearing (c == 0) and setting a memory array (c != 0) simply
+ * because nearly all memset invocations in the kernel clear memory and
+ * the xc instruction is preferred in such cases.
+ *
+ * void *memset(void *s, int c, size_t n)
+ * {
+ *	if (likely(c == 0))
+ *		return __builtin_memset(s, 0, n);
+ *	return __builtin_memset(s, c, n);
+ * }
+ */
+ENTRY(memset)
+	basr	%r5,%r0
+.Lmemset_base:
+	ltr	%r4,%r4
+	bzr	%r14
+	ltr	%r3,%r3
+	jnz	.Lmemset_fill
+	ahi	%r4,-1
+	lr	%r3,%r4
+	srl	%r3,8
+	ltr	%r3,%r3
+	lr	%r1,%r2
+	je	.Lmemset_clear_rest
+.Lmemset_clear_loop:
+	xc	0(256,%r1),0(%r1)
+	la	%r1,256(%r1)
+	brct	%r3,.Lmemset_clear_loop
+.Lmemset_clear_rest:
+	ex	%r4,.Lmemset_xc-.Lmemset_base(%r5)
+	br	%r14
+.Lmemset_fill:
+	stc	%r3,0(%r2)
+	chi	%r4,1
+	lr	%r1,%r2
+	ber	%r14
+	ahi	%r4,-2
+	lr	%r3,%r4
+	srl	%r3,8
+	ltr	%r3,%r3
+	je	.Lmemset_fill_rest
+.Lmemset_fill_loop:
+	mvc	1(256,%r1),0(%r1)
+	la	%r1,256(%r1)
+	brct	%r3,.Lmemset_fill_loop
+.Lmemset_fill_rest:
+	ex	%r4,.Lmemset_mvc-.Lmemset_base(%r5)
+	br	%r14
+.Lmemset_xc:
+	xc	0(1,%r1),0(%r1)
+.Lmemset_mvc:
+	mvc	1(1,%r1),0(%r1)
+
+/*
+ * memcpy implementation
+ *
+ * void *memcpy(void *dest, const void *src, size_t n)
+ */
+ENTRY(memcpy)
+	basr	%r5,%r0
+.Lmemcpy_base:
+	ltr	%r4,%r4
+	bzr	%r14
+	ahi	%r4,-1
+	lr	%r0,%r4
+	srl	%r0,8
+	ltr	%r0,%r0
+	lr	%r1,%r2
+	jnz	.Lmemcpy_loop
+.Lmemcpy_rest:
+	ex	%r4,.Lmemcpy_mvc-.Lmemcpy_base(%r5)
+	br	%r14
+.Lmemcpy_loop:
+	mvc	0(256,%r1),0(%r3)
+	la	%r1,256(%r1)
+	la	%r3,256(%r3)
+	brct	%r0,.Lmemcpy_loop
+	j	.Lmemcpy_rest
+.Lmemcpy_mvc:
+	mvc	0(1,%r1),0(%r3)
diff --git a/arch/s390/lib/mem64.S b/arch/s390/lib/mem64.S
new file mode 100644
index 000000000000..c6d553e85ab1
--- /dev/null
+++ b/arch/s390/lib/mem64.S
@@ -0,0 +1,88 @@
+/*
+ * String handling functions.
+ *
+ * Copyright IBM Corp. 2012
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * memset implementation
+ *
+ * This code corresponds to the C construct below. We do distinguish
+ * between clearing (c == 0) and setting a memory array (c != 0) simply
+ * because nearly all memset invocations in the kernel clear memory and
+ * the xc instruction is preferred in such cases.
+ *
+ * void *memset(void *s, int c, size_t n)
+ * {
+ *	if (likely(c == 0))
+ *		return __builtin_memset(s, 0, n);
+ *	return __builtin_memset(s, c, n);
+ * }
+ */
+ENTRY(memset)
+	ltgr	%r4,%r4
+	bzr	%r14
+	ltgr	%r3,%r3
+	jnz	.Lmemset_fill
+	aghi	%r4,-1
+	srlg	%r3,%r4,8
+	ltgr	%r3,%r3
+	lgr	%r1,%r2
+	jz	.Lmemset_clear_rest
+.Lmemset_clear_loop:
+	xc	0(256,%r1),0(%r1)
+	la	%r1,256(%r1)
+	brctg	%r3,.Lmemset_clear_loop
+.Lmemset_clear_rest:
+	larl	%r3,.Lmemset_xc
+	ex	%r4,0(%r3)
+	br	%r14
+.Lmemset_fill:
+	stc	%r3,0(%r2)
+	cghi	%r4,1
+	lgr	%r1,%r2
+	ber	%r14
+	aghi	%r4,-2
+	srlg	%r3,%r4,8
+	ltgr	%r3,%r3
+	jz	.Lmemset_fill_rest
+.Lmemset_fill_loop:
+	mvc	1(256,%r1),0(%r1)
+	la	%r1,256(%r1)
+	brctg	%r3,.Lmemset_fill_loop
+.Lmemset_fill_rest:
+	larl	%r3,.Lmemset_mvc
+	ex	%r4,0(%r3)
+	br	%r14
+.Lmemset_xc:
+	xc	0(1,%r1),0(%r1)
+.Lmemset_mvc:
+	mvc	1(1,%r1),0(%r1)
+
+/*
+ * memcpy implementation
+ *
+ * void *memcpy(void *dest, const void *src, size_t n)
+ */
+ENTRY(memcpy)
+	ltgr	%r4,%r4
+	bzr	%r14
+	aghi	%r4,-1
+	srlg	%r5,%r4,8
+	ltgr	%r5,%r5
+	lgr	%r1,%r2
+	jnz	.Lmemcpy_loop
+.Lmemcpy_rest:
+	larl	%r5,.Lmemcpy_mvc
+	ex	%r4,0(%r5)
+	br	%r14
+.Lmemcpy_loop:
+	mvc	0(256,%r1),0(%r3)
+	la	%r1,256(%r1)
+	la	%r3,256(%r3)
+	brctg	%r5,.Lmemcpy_loop
+	j	.Lmemcpy_rest
+.Lmemcpy_mvc:
+	mvc	0(1,%r1),0(%r3)
diff --git a/arch/s390/lib/string.c b/arch/s390/lib/string.c
index 846ec64ab2c9..b647d5ff0ad9 100644
--- a/arch/s390/lib/string.c
+++ b/arch/s390/lib/string.c
@@ -43,11 +43,7 @@ static inline char *__strnend(const char *s, size_t n)
  */
 size_t strlen(const char *s)
 {
-#if __GNUC__ < 4
 	return __strend(s) - s;
-#else
-	return __builtin_strlen(s);
-#endif
 }
 EXPORT_SYMBOL(strlen);
 
@@ -73,7 +69,6 @@ EXPORT_SYMBOL(strnlen);
  */
 char *strcpy(char *dest, const char *src)
 {
-#if __GNUC__ < 4
 	register int r0 asm("0") = 0;
 	char *ret = dest;
 
@@ -82,9 +77,6 @@ char *strcpy(char *dest, const char *src)
 		      : "+&a" (dest), "+&a" (src) : "d" (r0)
 		      : "cc", "memory" );
 	return ret;
-#else
-	return __builtin_strcpy(dest, src);
-#endif
 }
 EXPORT_SYMBOL(strcpy);
 
@@ -106,7 +98,7 @@ size_t strlcpy(char *dest, const char *src, size_t size)
 	if (size) {
 		size_t len = (ret >= size) ? size-1 : ret;
 		dest[len] = '\0';
-		__builtin_memcpy(dest, src, len);
+		memcpy(dest, src, len);
 	}
 	return ret;
 }
@@ -124,8 +116,8 @@ EXPORT_SYMBOL(strlcpy);
 char *strncpy(char *dest, const char *src, size_t n)
 {
 	size_t len = __strnend(src, n) - src;
-	__builtin_memset(dest + len, 0, n - len);
-	__builtin_memcpy(dest, src, len);
+	memset(dest + len, 0, n - len);
+	memcpy(dest, src, len);
 	return dest;
 }
 EXPORT_SYMBOL(strncpy);
@@ -171,7 +163,7 @@ size_t strlcat(char *dest, const char *src, size_t n)
 		if (len >= n)
 			len = n - 1;
 		dest[len] = '\0';
-		__builtin_memcpy(dest, src, len);
+		memcpy(dest, src, len);
 	}
 	return res;
 }
@@ -194,7 +186,7 @@ char *strncat(char *dest, const char *src, size_t n)
 	char *p = __strend(dest);
 
 	p[len] = '\0';
-	__builtin_memcpy(p, src, len);
+	memcpy(p, src, len);
 	return dest;
 }
 EXPORT_SYMBOL(strncat);
@@ -348,41 +340,3 @@ void *memscan(void *s, int c, size_t n)
 	return (void *) ret;
 }
 EXPORT_SYMBOL(memscan);
-
-/**
- * memcpy - Copy one area of memory to another
- * @dest: Where to copy to
- * @src: Where to copy from
- * @n: The size of the area.
- *
- * returns a pointer to @dest
- */
-void *memcpy(void *dest, const void *src, size_t n)
-{
-	return __builtin_memcpy(dest, src, n);
-}
-EXPORT_SYMBOL(memcpy);
-
-/**
- * memset - Fill a region of memory with the given value
- * @s: Pointer to the start of the area.
- * @c: The byte to fill the area with
- * @n: The size of the area.
- *
- * returns a pointer to @s
- */
-void *memset(void *s, int c, size_t n)
-{
-	char *xs;
-
-	if (c == 0)
-		return __builtin_memset(s, 0, n);
-
-	xs = (char *) s;
-	if (n > 0)
-		do {
-			*xs++ = c;
-		} while (--n > 0);
-	return s;
-}
-EXPORT_SYMBOL(memset);
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 60ee2b883797..2d37bb861faf 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -2,69 +2,82 @@
  *  User access functions based on page table walks for enhanced
  *  system layout without hardware support.
  *
- *    Copyright IBM Corp. 2006
+ *    Copyright IBM Corp. 2006, 2012
  *    Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com)
  */
 
 #include <linux/errno.h>
 #include <linux/hardirq.h>
 #include <linux/mm.h>
+#include <linux/hugetlb.h>
 #include <asm/uaccess.h>
 #include <asm/futex.h>
 #include "uaccess.h"
 
-static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr)
+
+/*
+ * Returns kernel address for user virtual address. If the returned address is
+ * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address
+ * contains the (negative) exception code.
+ */
+static __always_inline unsigned long follow_table(struct mm_struct *mm,
+						  unsigned long addr, int write)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
+	pte_t *ptep;
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
-		return (pte_t *) 0x3a;
+		return -0x3aUL;
 
 	pud = pud_offset(pgd, addr);
 	if (pud_none(*pud) || unlikely(pud_bad(*pud)))
-		return (pte_t *) 0x3b;
+		return -0x3bUL;
 
 	pmd = pmd_offset(pud, addr);
-	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
-		return (pte_t *) 0x10;
+	if (pmd_none(*pmd))
+		return -0x10UL;
+	if (pmd_huge(*pmd)) {
+		if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
+			return -0x04UL;
+		return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
+	}
+	if (unlikely(pmd_bad(*pmd)))
+		return -0x10UL;
+
+	ptep = pte_offset_map(pmd, addr);
+	if (!pte_present(*ptep))
+		return -0x11UL;
+	if (write && !pte_write(*ptep))
+		return -0x04UL;
 
-	return pte_offset_map(pmd, addr);
+	return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK);
 }
 
 static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
 					     size_t n, int write_user)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long offset, pfn, done, size;
-	pte_t *pte;
+	unsigned long offset, done, size, kaddr;
 	void *from, *to;
 
 	done = 0;
 retry:
 	spin_lock(&mm->page_table_lock);
 	do {
-		pte = follow_table(mm, uaddr);
-		if ((unsigned long) pte < 0x1000)
+		kaddr = follow_table(mm, uaddr, write_user);
+		if (IS_ERR_VALUE(kaddr))
 			goto fault;
-		if (!pte_present(*pte)) {
-			pte = (pte_t *) 0x11;
-			goto fault;
-		} else if (write_user && !pte_write(*pte)) {
-			pte = (pte_t *) 0x04;
-			goto fault;
-		}
 
-		pfn = pte_pfn(*pte);
-		offset = uaddr & (PAGE_SIZE - 1);
+		offset = uaddr & ~PAGE_MASK;
 		size = min(n - done, PAGE_SIZE - offset);
 		if (write_user) {
-			to = (void *)((pfn << PAGE_SHIFT) + offset);
+			to = (void *) kaddr;
 			from = kptr + done;
 		} else {
-			from = (void *)((pfn << PAGE_SHIFT) + offset);
+			from = (void *) kaddr;
 			to = kptr + done;
 		}
 		memcpy(to, from, size);
@@ -75,7 +88,7 @@ retry:
 	return n - done;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	if (__handle_fault(uaddr, (unsigned long) pte, write_user))
+	if (__handle_fault(uaddr, -kaddr, write_user))
 		return n - done;
 	goto retry;
 }
@@ -84,27 +97,22 @@ fault:
  * Do DAT for user address by page table walk, return kernel address.
  * This function needs to be called with current->mm->page_table_lock held.
  */
-static __always_inline unsigned long __dat_user_addr(unsigned long uaddr)
+static __always_inline unsigned long __dat_user_addr(unsigned long uaddr,
+						     int write)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long pfn;
-	pte_t *pte;
+	unsigned long kaddr;
 	int rc;
 
 retry:
-	pte = follow_table(mm, uaddr);
-	if ((unsigned long) pte < 0x1000)
-		goto fault;
-	if (!pte_present(*pte)) {
-		pte = (pte_t *) 0x11;
+	kaddr = follow_table(mm, uaddr, write);
+	if (IS_ERR_VALUE(kaddr))
 		goto fault;
-	}
 
-	pfn = pte_pfn(*pte);
-	return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
+	return kaddr;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	rc = __handle_fault(uaddr, (unsigned long) pte, 0);
+	rc = __handle_fault(uaddr, -kaddr, write);
 	spin_lock(&mm->page_table_lock);
 	if (!rc)
 		goto retry;
@@ -159,11 +167,9 @@ static size_t clear_user_pt(size_t n, void __user *to)
 
 static size_t strnlen_user_pt(size_t count, const char __user *src)
 {
-	char *addr;
 	unsigned long uaddr = (unsigned long) src;
 	struct mm_struct *mm = current->mm;
-	unsigned long offset, pfn, done, len;
-	pte_t *pte;
+	unsigned long offset, done, len, kaddr;
 	size_t len_str;
 
 	if (segment_eq(get_fs(), KERNEL_DS))
@@ -172,19 +178,13 @@ static size_t strnlen_user_pt(size_t count, const char __user *src)
 retry:
 	spin_lock(&mm->page_table_lock);
 	do {
-		pte = follow_table(mm, uaddr);
-		if ((unsigned long) pte < 0x1000)
-			goto fault;
-		if (!pte_present(*pte)) {
-			pte = (pte_t *) 0x11;
+		kaddr = follow_table(mm, uaddr, 0);
+		if (IS_ERR_VALUE(kaddr))
 			goto fault;
-		}
 
-		pfn = pte_pfn(*pte);
-		offset = uaddr & (PAGE_SIZE-1);
-		addr = (char *)(pfn << PAGE_SHIFT) + offset;
+		offset = uaddr & ~PAGE_MASK;
 		len = min(count - done, PAGE_SIZE - offset);
-		len_str = strnlen(addr, len);
+		len_str = strnlen((char *) kaddr, len);
 		done += len_str;
 		uaddr += len_str;
 	} while ((len_str == len) && (done < count));
@@ -192,7 +192,7 @@ retry:
 	return done + 1;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	if (__handle_fault(uaddr, (unsigned long) pte, 0))
+	if (__handle_fault(uaddr, -kaddr, 0))
 		return 0;
 	goto retry;
 }
@@ -225,11 +225,10 @@ static size_t copy_in_user_pt(size_t n, void __user *to,
 			      const void __user *from)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to,
-		      uaddr, done, size, error_code;
+	unsigned long offset_max, uaddr, done, size, error_code;
 	unsigned long uaddr_from = (unsigned long) from;
 	unsigned long uaddr_to = (unsigned long) to;
-	pte_t *pte_from, *pte_to;
+	unsigned long kaddr_to, kaddr_from;
 	int write_user;
 
 	if (segment_eq(get_fs(), KERNEL_DS)) {
@@ -242,38 +241,23 @@ retry:
 	do {
 		write_user = 0;
 		uaddr = uaddr_from;
-		pte_from = follow_table(mm, uaddr_from);
-		error_code = (unsigned long) pte_from;
-		if (error_code < 0x1000)
-			goto fault;
-		if (!pte_present(*pte_from)) {
-			error_code = 0x11;
+		kaddr_from = follow_table(mm, uaddr_from, 0);
+		error_code = kaddr_from;
+		if (IS_ERR_VALUE(error_code))
 			goto fault;
-		}
 
 		write_user = 1;
 		uaddr = uaddr_to;
-		pte_to = follow_table(mm, uaddr_to);
-		error_code = (unsigned long) pte_to;
-		if (error_code < 0x1000)
-			goto fault;
-		if (!pte_present(*pte_to)) {
-			error_code = 0x11;
+		kaddr_to = follow_table(mm, uaddr_to, 1);
+		error_code = (unsigned long) kaddr_to;
+		if (IS_ERR_VALUE(error_code))
 			goto fault;
-		} else if (!pte_write(*pte_to)) {
-			error_code = 0x04;
-			goto fault;
-		}
 
-		pfn_from = pte_pfn(*pte_from);
-		pfn_to = pte_pfn(*pte_to);
-		offset_from = uaddr_from & (PAGE_SIZE-1);
-		offset_to = uaddr_from & (PAGE_SIZE-1);
-		offset_max = max(offset_from, offset_to);
+		offset_max = max(uaddr_from & ~PAGE_MASK,
+				 uaddr_to & ~PAGE_MASK);
 		size = min(n - done, PAGE_SIZE - offset_max);
 
-		memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to,
-		       (void *)(pfn_from << PAGE_SHIFT) + offset_from, size);
+		memcpy((void *) kaddr_to, (void *) kaddr_from, size);
 		done += size;
 		uaddr_from += size;
 		uaddr_to += size;
@@ -282,7 +266,7 @@ retry:
 	return n - done;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	if (__handle_fault(uaddr, error_code, write_user))
+	if (__handle_fault(uaddr, -error_code, write_user))
 		return n - done;
 	goto retry;
 }
@@ -341,7 +325,7 @@ int futex_atomic_op_pt(int op, u32 __user *uaddr, int oparg, int *old)
 		return __futex_atomic_op_pt(op, uaddr, oparg, old);
 	spin_lock(&current->mm->page_table_lock);
 	uaddr = (u32 __force __user *)
-		__dat_user_addr((__force unsigned long) uaddr);
+		__dat_user_addr((__force unsigned long) uaddr, 1);
 	if (!uaddr) {
 		spin_unlock(&current->mm->page_table_lock);
 		return -EFAULT;
@@ -378,7 +362,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr,
 		return __futex_atomic_cmpxchg_pt(uval, uaddr, oldval, newval);
 	spin_lock(&current->mm->page_table_lock);
 	uaddr = (u32 __force __user *)
-		__dat_user_addr((__force unsigned long) uaddr);
+		__dat_user_addr((__force unsigned long) uaddr, 1);
 	if (!uaddr) {
 		spin_unlock(&current->mm->page_table_lock);
 		return -EFAULT;
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index d98fe9004a52..0f5536b0c1a1 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o \
-	    page-states.o gup.o
+	    page-states.o gup.o extable.o
 obj-$(CONFIG_CMM) += cmm.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 obj-$(CONFIG_DEBUG_SET_MODULE_RONX) += pageattr.o
diff --git a/arch/s390/mm/extable.c b/arch/s390/mm/extable.c
new file mode 100644
index 000000000000..4d1ee88864e8
--- /dev/null
+++ b/arch/s390/mm/extable.c
@@ -0,0 +1,81 @@
+#include <linux/module.h>
+#include <linux/sort.h>
+#include <asm/uaccess.h>
+
+/*
+ * Search one exception table for an entry corresponding to the
+ * given instruction address, and return the address of the entry,
+ * or NULL if none is found.
+ * We use a binary search, and thus we assume that the table is
+ * already sorted.
+ */
+const struct exception_table_entry *
+search_extable(const struct exception_table_entry *first,
+	       const struct exception_table_entry *last,
+	       unsigned long value)
+{
+	const struct exception_table_entry *mid;
+	unsigned long addr;
+
+	while (first <= last) {
+		mid = ((last - first) >> 1) + first;
+		addr = extable_insn(mid);
+		if (addr < value)
+			first = mid + 1;
+		else if (addr > value)
+			last = mid - 1;
+		else
+			return mid;
+	}
+	return NULL;
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ *
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+	const struct exception_table_entry *x = a, *y = b;
+
+	/* This compare is only valid after normalization. */
+	return x->insn - y->insn;
+}
+
+void sort_extable(struct exception_table_entry *start,
+		  struct exception_table_entry *finish)
+{
+	struct exception_table_entry *p;
+	int i;
+
+	/* Normalize entries to being relative to the start of the section */
+	for (p = start, i = 0; p < finish; p++, i += 8)
+		p->insn += i;
+	sort(start, finish - start, sizeof(*start), cmp_ex, NULL);
+	/* Denormalize all entries */
+	for (p = start, i = 0; p < finish; p++, i += 8)
+		p->insn -= i;
+}
+
+#ifdef CONFIG_MODULES
+/*
+ * If the exception table is sorted, any referring to the module init
+ * will be at the beginning or the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/* Trim the beginning */
+	while (m->num_exentries &&
+	       within_module_init(extable_insn(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/* Trim the end */
+	while (m->num_exentries &&
+	       within_module_init(extable_insn(&m->extable[m->num_exentries-1]), m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 6c013f544146..ac9122ca1152 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -111,7 +111,7 @@ static inline int user_space_fault(unsigned long trans_exc_code)
 	if (trans_exc_code == 2)
 		/* Access via secondary space, set_fs setting decides */
 		return current->thread.mm_segment.ar4;
-	if (addressing_mode == HOME_SPACE_MODE)
+	if (s390_user_mode == HOME_SPACE_MODE)
 		/* User space if the access has been done via home space. */
 		return trans_exc_code == 3;
 	/*
@@ -163,7 +163,7 @@ static noinline void do_no_context(struct pt_regs *regs)
 	/* Are we prepared to handle this kernel fault?  */
 	fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
 	if (fixup) {
-		regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
+		regs->psw.addr = extable_fixup(fixup) | PSW_ADDR_AMODE;
 		return;
 	}
 
@@ -628,9 +628,8 @@ static int __cpuinit pfault_cpu_notify(struct notifier_block *self,
 	struct thread_struct *thread, *next;
 	struct task_struct *tsk;
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
 		spin_lock_irq(&pfault_lock);
 		list_for_each_entry_safe(thread, next, &pfault_list, list) {
 			thread->pfault_wait = 0;
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 65cb06e2af4e..eeaf8023851f 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -154,6 +154,43 @@ static inline int gup_pud_range(pgd_t *pgdp, pgd_t pgd, unsigned long addr,
 	return 1;
 }
 
+/*
+ * Like get_user_pages_fast() except its IRQ-safe in that it won't fall
+ * back to the regular GUP.
+ */
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			  struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next, flags;
+	pgd_t *pgdp, pgd;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					(void __user *)start, len)))
+		return 0;
+
+	local_irq_save(flags);
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd = *pgdp;
+		barrier();
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			break;
+		if (!gup_pud_range(pgdp, pgd, addr, next, write, pages, &nr))
+			break;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_restore(flags);
+
+	return nr;
+}
+
 /**
  * get_user_pages_fast() - pin user pages in memory
  * @start:	starting user address
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 6adbc082618a..81e596c65dee 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,7 +42,7 @@ pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 unsigned long empty_zero_page, zero_page_mask;
 EXPORT_SYMBOL(empty_zero_page);
 
-static unsigned long setup_zero_pages(void)
+static unsigned long __init setup_zero_pages(void)
 {
 	struct cpuid cpu_id;
 	unsigned int order;
@@ -212,7 +212,7 @@ void free_initmem(void)
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
+void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
 	free_init_pages("initrd memory", start, end);
 }
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 18df31d1f2c9..b402991e43d7 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -609,8 +609,8 @@ static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
  */
 unsigned long *page_table_alloc(struct mm_struct *mm, unsigned long vmaddr)
 {
-	struct page *page;
-	unsigned long *table;
+	unsigned long *uninitialized_var(table);
+	struct page *uninitialized_var(page);
 	unsigned int mask, bit;
 
 	if (mm_has_pgste(mm))
@@ -796,7 +796,7 @@ int s390_enable_sie(void)
 	struct mm_struct *mm, *old_mm;
 
 	/* Do we have switched amode? If no, we cannot do sie */
-	if (addressing_mode == HOME_SPACE_MODE)
+	if (s390_user_mode == HOME_SPACE_MODE)
 		return -EINVAL;
 
 	/* Do we have pgstes? if yes, we are done */
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 6f896e75ab49..c22abf900c9e 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -107,7 +107,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 		pte = mk_pte_phys(address, __pgprot(ro ? _PAGE_RO : 0));
 		pm_dir = pmd_offset(pu_dir, address);
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(CONFIG_DEBUG_PAGEALLOC)
 		if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) &&
 		    (address + HPAGE_SIZE <= start + size) &&
 		    (address >= HPAGE_SIZE)) {
diff --git a/arch/s390/net/Makefile b/arch/s390/net/Makefile
new file mode 100644
index 000000000000..90568c33ddb0
--- /dev/null
+++ b/arch/s390/net/Makefile
@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o
diff --git a/arch/s390/net/bpf_jit.S b/arch/s390/net/bpf_jit.S
new file mode 100644
index 000000000000..7e45d13816c1
--- /dev/null
+++ b/arch/s390/net/bpf_jit.S
@@ -0,0 +1,130 @@
+/*
+ * BPF Jit compiler for s390, help functions.
+ *
+ * Copyright IBM Corp. 2012
+ *
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+#include <linux/linkage.h>
+
+/*
+ * Calling convention:
+ * registers %r2, %r6-%r8, %r10-%r11, %r13, %r15 are call saved
+ *   %r2: skb pointer
+ *   %r3: offset parameter
+ *   %r5: BPF A accumulator
+ *   %r8: return address
+ *   %r9: save register for skb pointer
+ *   %r10: skb->data
+ *   %r11: skb->len - skb->data_len (headlen)
+ *   %r12: BPF X accumulator
+ *
+ * skb_copy_bits takes 4 parameters:
+ *   %r2 = skb pointer
+ *   %r3 = offset into skb data
+ *   %r4 = length to copy
+ *   %r5 = pointer to temp buffer
+ */
+#define SKBDATA	%r8
+
+	/* A = *(u32 *) (skb->data+K+X) */
+ENTRY(sk_load_word_ind)
+	ar	%r3,%r12		# offset += X
+	bmr	%r8			# < 0 -> return with cc
+
+	/* A = *(u32 *) (skb->data+K) */
+ENTRY(sk_load_word)
+	llgfr	%r1,%r3			# extend offset
+	ahi	%r3,4			# offset + 4
+	clr	%r11,%r3		# hlen <= offset + 4 ?
+	jl	sk_load_word_slow
+	l	%r5,0(%r1,%r10)		# get word from skb
+	xr	%r1,%r1			# set cc to zero
+	br	%r8
+
+sk_load_word_slow:
+	lgr	%r9,%r2			# save %r2
+	lhi	%r4,4			# 4 bytes
+	la	%r5,160(%r15)		# pointer to temp buffer
+	brasl	%r14,skb_copy_bits	# get data from skb
+	l	%r5,160(%r15)		# load result from temp buffer
+	ltgr	%r2,%r2			# set cc to (%r2 != 0)
+	lgr	%r2,%r9			# restore %r2
+	br	%r8
+
+	/* A = *(u16 *) (skb->data+K+X) */
+ENTRY(sk_load_half_ind)
+	ar	%r3,%r12		# offset += X
+	bmr	%r8			# < 0 -> return with cc
+
+	/* A = *(u16 *) (skb->data+K) */
+ENTRY(sk_load_half)
+	llgfr	%r1,%r3			# extend offset
+	ahi	%r3,2			# offset + 2
+	clr	%r11,%r3		# hlen <= offset + 2 ?
+	jl	sk_load_half_slow
+	llgh	%r5,0(%r1,%r10)		# get half from skb
+	xr	%r1,%r1			# set cc to zero
+	br	%r8
+
+sk_load_half_slow:
+	lgr	%r9,%r2			# save %r2
+	lhi	%r4,2			# 2 bytes
+	la	%r5,162(%r15)		# pointer to temp buffer
+	brasl	%r14,skb_copy_bits	# get data from skb
+	xc	160(2,%r15),160(%r15)
+	l	%r5,160(%r15)		# load result from temp buffer
+	ltgr	%r2,%r2			# set cc to (%r2 != 0)
+	lgr	%r2,%r9			# restore %r2
+	br	%r8
+
+	/* A = *(u8 *) (skb->data+K+X) */
+ENTRY(sk_load_byte_ind)
+	ar	%r3,%r12		# offset += X
+	bmr	%r8			# < 0 -> return with cc
+
+	/* A = *(u8 *) (skb->data+K) */
+ENTRY(sk_load_byte)
+	llgfr	%r1,%r3			# extend offset
+	clr	%r11,%r3		# hlen < offset ?
+	jle	sk_load_byte_slow
+	lhi	%r5,0
+	ic	%r5,0(%r1,%r10)		# get byte from skb
+	xr	%r1,%r1			# set cc to zero
+	br	%r8
+
+sk_load_byte_slow:
+	lgr	%r9,%r2			# save %r2
+	lhi	%r4,1			# 1 bytes
+	la	%r5,163(%r15)		# pointer to temp buffer
+	brasl	%r14,skb_copy_bits	# get data from skb
+	xc	160(3,%r15),160(%r15)
+	l	%r5,160(%r15)		# load result from temp buffer
+	ltgr	%r2,%r2			# set cc to (%r2 != 0)
+	lgr	%r2,%r9			# restore %r2
+	br	%r8
+
+	/* A = (*(u8 *)(skb->data+K) & 0xf) << 2 */
+ENTRY(sk_load_byte_msh)
+	llgfr	%r1,%r3			# extend offset
+	clr	%r11,%r3		# hlen < offset ?
+	jle	sk_load_byte_slow
+	lhi	%r12,0
+	ic	%r12,0(%r1,%r10)	# get byte from skb
+	nill	%r12,0x0f
+	sll	%r12,2
+	xr	%r1,%r1			# set cc to zero
+	br	%r8
+
+sk_load_byte_msh_slow:
+	lgr	%r9,%r2			# save %r2
+	lhi	%r4,2			# 2 bytes
+	la	%r5,162(%r15)		# pointer to temp buffer
+	brasl	%r14,skb_copy_bits	# get data from skb
+	xc	160(3,%r15),160(%r15)
+	l	%r12,160(%r15)		# load result from temp buffer
+	nill	%r12,0x0f
+	sll	%r12,2
+	ltgr	%r2,%r2			# set cc to (%r2 != 0)
+	lgr	%r2,%r9			# restore %r2
+	br	%r8
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
new file mode 100644
index 000000000000..9b355b406afa
--- /dev/null
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -0,0 +1,776 @@
+/*
+ * BPF Jit compiler for s390.
+ *
+ * Copyright IBM Corp. 2012
+ *
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+#include <linux/moduleloader.h>
+#include <linux/netdevice.h>
+#include <linux/filter.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/facility.h>
+
+/*
+ * Conventions:
+ *   %r2 = skb pointer
+ *   %r3 = offset parameter
+ *   %r4 = scratch register / length parameter
+ *   %r5 = BPF A accumulator
+ *   %r8 = return address
+ *   %r9 = save register for skb pointer
+ *   %r10 = skb->data
+ *   %r11 = skb->len - skb->data_len (headlen)
+ *   %r12 = BPF X accumulator
+ *   %r13 = literal pool pointer
+ *   0(%r15) - 63(%r15) scratch memory array with BPF_MEMWORDS
+ */
+int bpf_jit_enable __read_mostly;
+
+/*
+ * assembly code in arch/x86/net/bpf_jit.S
+ */
+extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+extern u8 sk_load_word_ind[], sk_load_half_ind[], sk_load_byte_ind[];
+
+struct bpf_jit {
+	unsigned int seen;
+	u8 *start;
+	u8 *prg;
+	u8 *mid;
+	u8 *lit;
+	u8 *end;
+	u8 *base_ip;
+	u8 *ret0_ip;
+	u8 *exit_ip;
+	unsigned int off_load_word;
+	unsigned int off_load_half;
+	unsigned int off_load_byte;
+	unsigned int off_load_bmsh;
+	unsigned int off_load_iword;
+	unsigned int off_load_ihalf;
+	unsigned int off_load_ibyte;
+};
+
+#define BPF_SIZE_MAX	4096	/* Max size for program */
+
+#define SEEN_DATAREF	1	/* might call external helpers */
+#define SEEN_XREG	2	/* ebx is used */
+#define SEEN_MEM	4	/* use mem[] for temporary storage */
+#define SEEN_RET0	8	/* pc_ret0 points to a valid return 0 */
+#define SEEN_LITERAL	16	/* code uses literals */
+#define SEEN_LOAD_WORD	32	/* code uses sk_load_word */
+#define SEEN_LOAD_HALF	64	/* code uses sk_load_half */
+#define SEEN_LOAD_BYTE	128	/* code uses sk_load_byte */
+#define SEEN_LOAD_BMSH	256	/* code uses sk_load_byte_msh */
+#define SEEN_LOAD_IWORD	512	/* code uses sk_load_word_ind */
+#define SEEN_LOAD_IHALF	1024	/* code uses sk_load_half_ind */
+#define SEEN_LOAD_IBYTE	2048	/* code uses sk_load_byte_ind */
+
+#define EMIT2(op)					\
+({							\
+	if (jit->prg + 2 <= jit->mid)			\
+		*(u16 *) jit->prg = op;			\
+	jit->prg += 2;					\
+})
+
+#define EMIT4(op)					\
+({							\
+	if (jit->prg + 4 <= jit->mid)			\
+		*(u32 *) jit->prg = op;			\
+	jit->prg += 4;					\
+})
+
+#define EMIT4_DISP(op, disp)				\
+({							\
+	unsigned int __disp = (disp) & 0xfff;		\
+	EMIT4(op | __disp);				\
+})
+
+#define EMIT4_IMM(op, imm)				\
+({							\
+	unsigned int __imm = (imm) & 0xffff;		\
+	EMIT4(op | __imm);				\
+})
+
+#define EMIT4_PCREL(op, pcrel)				\
+({							\
+	long __pcrel = ((pcrel) >> 1) & 0xffff;		\
+	EMIT4(op | __pcrel);				\
+})
+
+#define EMIT6(op1, op2)					\
+({							\
+	if (jit->prg + 6 <= jit->mid) {			\
+		*(u32 *) jit->prg = op1;		\
+		*(u16 *) (jit->prg + 4) = op2;		\
+	}						\
+	jit->prg += 6;					\
+})
+
+#define EMIT6_DISP(op1, op2, disp)			\
+({							\
+	unsigned int __disp = (disp) & 0xfff;		\
+	EMIT6(op1 | __disp, op2);			\
+})
+
+#define EMIT6_IMM(op, imm)				\
+({							\
+	unsigned int __imm = (imm);			\
+	EMIT6(op | (__imm >> 16), __imm & 0xffff);	\
+})
+
+#define EMIT_CONST(val)					\
+({							\
+	unsigned int ret;				\
+	ret = (unsigned int) (jit->lit - jit->base_ip);	\
+	jit->seen |= SEEN_LITERAL;			\
+	if (jit->lit + 4 <= jit->end)			\
+		*(u32 *) jit->lit = val;		\
+	jit->lit += 4;					\
+	ret;						\
+})
+
+#define EMIT_FN_CONST(bit, fn)				\
+({							\
+	unsigned int ret;				\
+	ret = (unsigned int) (jit->lit - jit->base_ip);	\
+	if (jit->seen & bit) {				\
+		jit->seen |= SEEN_LITERAL;		\
+		if (jit->lit + 8 <= jit->end)		\
+			*(void **) jit->lit = fn;	\
+		jit->lit += 8;				\
+	}						\
+	ret;						\
+})
+
+static void bpf_jit_prologue(struct bpf_jit *jit)
+{
+	/* Save registers and create stack frame if necessary */
+	if (jit->seen & SEEN_DATAREF) {
+		/* stmg %r8,%r15,88(%r15) */
+		EMIT6(0xeb8ff058, 0x0024);
+		/* lgr %r14,%r15 */
+		EMIT4(0xb90400ef);
+		/* ahi %r15,<offset> */
+		EMIT4_IMM(0xa7fa0000, (jit->seen & SEEN_MEM) ? -112 : -80);
+		/* stg %r14,152(%r15) */
+		EMIT6(0xe3e0f098, 0x0024);
+	} else if ((jit->seen & SEEN_XREG) && (jit->seen & SEEN_LITERAL))
+		/* stmg %r12,%r13,120(%r15) */
+		EMIT6(0xebcdf078, 0x0024);
+	else if (jit->seen & SEEN_XREG)
+		/* stg %r12,120(%r15) */
+		EMIT6(0xe3c0f078, 0x0024);
+	else if (jit->seen & SEEN_LITERAL)
+		/* stg %r13,128(%r15) */
+		EMIT6(0xe3d0f080, 0x0024);
+
+	/* Setup literal pool */
+	if (jit->seen & SEEN_LITERAL) {
+		/* basr %r13,0 */
+		EMIT2(0x0dd0);
+		jit->base_ip = jit->prg;
+	}
+	jit->off_load_word = EMIT_FN_CONST(SEEN_LOAD_WORD, sk_load_word);
+	jit->off_load_half = EMIT_FN_CONST(SEEN_LOAD_HALF, sk_load_half);
+	jit->off_load_byte = EMIT_FN_CONST(SEEN_LOAD_BYTE, sk_load_byte);
+	jit->off_load_bmsh = EMIT_FN_CONST(SEEN_LOAD_BMSH, sk_load_byte_msh);
+	jit->off_load_iword = EMIT_FN_CONST(SEEN_LOAD_IWORD, sk_load_word_ind);
+	jit->off_load_ihalf = EMIT_FN_CONST(SEEN_LOAD_IHALF, sk_load_half_ind);
+	jit->off_load_ibyte = EMIT_FN_CONST(SEEN_LOAD_IBYTE, sk_load_byte_ind);
+
+	/* Filter needs to access skb data */
+	if (jit->seen & SEEN_DATAREF) {
+		/* l %r11,<len>(%r2) */
+		EMIT4_DISP(0x58b02000, offsetof(struct sk_buff, len));
+		/* s %r11,<data_len>(%r2) */
+		EMIT4_DISP(0x5bb02000, offsetof(struct sk_buff, data_len));
+		/* lg %r10,<data>(%r2) */
+		EMIT6_DISP(0xe3a02000, 0x0004,
+			   offsetof(struct sk_buff, data));
+	}
+}
+
+static void bpf_jit_epilogue(struct bpf_jit *jit)
+{
+	/* Return 0 */
+	if (jit->seen & SEEN_RET0) {
+		jit->ret0_ip = jit->prg;
+		/* lghi %r2,0 */
+		EMIT4(0xa7290000);
+	}
+	jit->exit_ip = jit->prg;
+	/* Restore registers */
+	if (jit->seen & SEEN_DATAREF)
+		/* lmg %r8,%r15,<offset>(%r15) */
+		EMIT6_DISP(0xeb8ff000, 0x0004,
+			   (jit->seen & SEEN_MEM) ? 200 : 168);
+	else if ((jit->seen & SEEN_XREG) && (jit->seen & SEEN_LITERAL))
+		/* lmg %r12,%r13,120(%r15) */
+		EMIT6(0xebcdf078, 0x0004);
+	else if (jit->seen & SEEN_XREG)
+		/* lg %r12,120(%r15) */
+		EMIT6(0xe3c0f078, 0x0004);
+	else if (jit->seen & SEEN_LITERAL)
+		/* lg %r13,128(%r15) */
+		EMIT6(0xe3d0f080, 0x0004);
+	/* br %r14 */
+	EMIT2(0x07fe);
+}
+
+/*
+ * make sure we dont leak kernel information to user
+ */
+static void bpf_jit_noleaks(struct bpf_jit *jit, struct sock_filter *filter)
+{
+	/* Clear temporary memory if (seen & SEEN_MEM) */
+	if (jit->seen & SEEN_MEM)
+		/* xc 0(64,%r15),0(%r15) */
+		EMIT6(0xd73ff000, 0xf000);
+	/* Clear X if (seen & SEEN_XREG) */
+	if (jit->seen & SEEN_XREG)
+		/* lhi %r12,0 */
+		EMIT4(0xa7c80000);
+	/* Clear A if the first register does not set it. */
+	switch (filter[0].code) {
+	case BPF_S_LD_W_ABS:
+	case BPF_S_LD_H_ABS:
+	case BPF_S_LD_B_ABS:
+	case BPF_S_LD_W_LEN:
+	case BPF_S_LD_W_IND:
+	case BPF_S_LD_H_IND:
+	case BPF_S_LD_B_IND:
+	case BPF_S_LDX_B_MSH:
+	case BPF_S_LD_IMM:
+	case BPF_S_LD_MEM:
+	case BPF_S_MISC_TXA:
+	case BPF_S_ANC_PROTOCOL:
+	case BPF_S_ANC_PKTTYPE:
+	case BPF_S_ANC_IFINDEX:
+	case BPF_S_ANC_MARK:
+	case BPF_S_ANC_QUEUE:
+	case BPF_S_ANC_HATYPE:
+	case BPF_S_ANC_RXHASH:
+	case BPF_S_ANC_CPU:
+	case BPF_S_RET_K:
+		/* first instruction sets A register */
+		break;
+	default: /* A = 0 */
+		/* lhi %r5,0 */
+		EMIT4(0xa7580000);
+	}
+}
+
+static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
+			unsigned int *addrs, int i, int last)
+{
+	unsigned int K;
+	int offset;
+	unsigned int mask;
+
+	K = filter->k;
+	switch (filter->code) {
+	case BPF_S_ALU_ADD_X: /* A += X */
+		jit->seen |= SEEN_XREG;
+		/* ar %r5,%r12 */
+		EMIT2(0x1a5c);
+		break;
+	case BPF_S_ALU_ADD_K: /* A += K */
+		if (!K)
+			break;
+		if (K <= 16383)
+			/* ahi %r5,<K> */
+			EMIT4_IMM(0xa75a0000, K);
+		else if (test_facility(21))
+			/* alfi %r5,<K> */
+			EMIT6_IMM(0xc25b0000, K);
+		else
+			/* a %r5,<d(K)>(%r13) */
+			EMIT4_DISP(0x5a50d000, EMIT_CONST(K));
+		break;
+	case BPF_S_ALU_SUB_X: /* A -= X */
+		jit->seen |= SEEN_XREG;
+		/* sr %r5,%r12 */
+		EMIT2(0x1b5c);
+		break;
+	case BPF_S_ALU_SUB_K: /* A -= K */
+		if (!K)
+			break;
+		if (K <= 16384)
+			/* ahi %r5,-K */
+			EMIT4_IMM(0xa75a0000, -K);
+		else if (test_facility(21))
+			/* alfi %r5,-K */
+			EMIT6_IMM(0xc25b0000, -K);
+		else
+			/* s %r5,<d(K)>(%r13) */
+			EMIT4_DISP(0x5b50d000, EMIT_CONST(K));
+		break;
+	case BPF_S_ALU_MUL_X: /* A *= X */
+		jit->seen |= SEEN_XREG;
+		/* msr %r5,%r12 */
+		EMIT4(0xb252005c);
+		break;
+	case BPF_S_ALU_MUL_K: /* A *= K */
+		if (K <= 16383)
+			/* mhi %r5,K */
+			EMIT4_IMM(0xa75c0000, K);
+		else if (test_facility(34))
+			/* msfi %r5,<K> */
+			EMIT6_IMM(0xc2510000, K);
+		else
+			/* ms %r5,<d(K)>(%r13) */
+			EMIT4_DISP(0x7150d000, EMIT_CONST(K));
+		break;
+	case BPF_S_ALU_DIV_X: /* A /= X */
+		jit->seen |= SEEN_XREG | SEEN_RET0;
+		/* ltr %r12,%r12 */
+		EMIT2(0x12cc);
+		/* jz <ret0> */
+		EMIT4_PCREL(0xa7840000, (jit->ret0_ip - jit->prg));
+		/* lhi %r4,0 */
+		EMIT4(0xa7480000);
+		/* dr %r4,%r12 */
+		EMIT2(0x1d4c);
+		break;
+	case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K) */
+		/* m %r4,<d(K)>(%r13) */
+		EMIT4_DISP(0x5c40d000, EMIT_CONST(K));
+		/* lr %r5,%r4 */
+		EMIT2(0x1854);
+		break;
+	case BPF_S_ALU_AND_X: /* A &= X */
+		jit->seen |= SEEN_XREG;
+		/* nr %r5,%r12 */
+		EMIT2(0x145c);
+		break;
+	case BPF_S_ALU_AND_K: /* A &= K */
+		if (test_facility(21))
+			/* nilf %r5,<K> */
+			EMIT6_IMM(0xc05b0000, K);
+		else
+			/* n %r5,<d(K)>(%r13) */
+			EMIT4_DISP(0x5450d000, EMIT_CONST(K));
+		break;
+	case BPF_S_ALU_OR_X: /* A |= X */
+		jit->seen |= SEEN_XREG;
+		/* or %r5,%r12 */
+		EMIT2(0x165c);
+		break;
+	case BPF_S_ALU_OR_K: /* A |= K */
+		if (test_facility(21))
+			/* oilf %r5,<K> */
+			EMIT6_IMM(0xc05d0000, K);
+		else
+			/* o %r5,<d(K)>(%r13) */
+			EMIT4_DISP(0x5650d000, EMIT_CONST(K));
+		break;
+	case BPF_S_ANC_ALU_XOR_X: /* A ^= X; */
+		jit->seen |= SEEN_XREG;
+		/* xr %r5,%r12 */
+		EMIT2(0x175c);
+		break;
+	case BPF_S_ALU_LSH_X: /* A <<= X; */
+		jit->seen |= SEEN_XREG;
+		/* sll %r5,0(%r12) */
+		EMIT4(0x8950c000);
+		break;
+	case BPF_S_ALU_LSH_K: /* A <<= K */
+		if (K == 0)
+			break;
+		/* sll %r5,K */
+		EMIT4_DISP(0x89500000, K);
+		break;
+	case BPF_S_ALU_RSH_X: /* A >>= X; */
+		jit->seen |= SEEN_XREG;
+		/* srl %r5,0(%r12) */
+		EMIT4(0x8850c000);
+		break;
+	case BPF_S_ALU_RSH_K: /* A >>= K; */
+		if (K == 0)
+			break;
+		/* srl %r5,K */
+		EMIT4_DISP(0x88500000, K);
+		break;
+	case BPF_S_ALU_NEG: /* A = -A */
+		/* lnr %r5,%r5 */
+		EMIT2(0x1155);
+		break;
+	case BPF_S_JMP_JA: /* ip += K */
+		offset = addrs[i + K] + jit->start - jit->prg;
+		EMIT4_PCREL(0xa7f40000, offset);
+		break;
+	case BPF_S_JMP_JGT_K: /* ip += (A > K) ? jt : jf */
+		mask = 0x200000; /* jh */
+		goto kbranch;
+	case BPF_S_JMP_JGE_K: /* ip += (A >= K) ? jt : jf */
+		mask = 0xa00000; /* jhe */
+		goto kbranch;
+	case BPF_S_JMP_JEQ_K: /* ip += (A == K) ? jt : jf */
+		mask = 0x800000; /* je */
+kbranch:	/* Emit compare if the branch targets are different */
+		if (filter->jt != filter->jf) {
+			if (K <= 16383)
+				/* chi %r5,<K> */
+				EMIT4_IMM(0xa75e0000, K);
+			else if (test_facility(21))
+				/* clfi %r5,<K> */
+				EMIT6_IMM(0xc25f0000, K);
+			else
+				/* c %r5,<d(K)>(%r13) */
+				EMIT4_DISP(0x5950d000, EMIT_CONST(K));
+		}
+branch:		if (filter->jt == filter->jf) {
+			if (filter->jt == 0)
+				break;
+			/* j <jt> */
+			offset = addrs[i + filter->jt] + jit->start - jit->prg;
+			EMIT4_PCREL(0xa7f40000, offset);
+			break;
+		}
+		if (filter->jt != 0) {
+			/* brc	<mask>,<jt> */
+			offset = addrs[i + filter->jt] + jit->start - jit->prg;
+			EMIT4_PCREL(0xa7040000 | mask, offset);
+		}
+		if (filter->jf != 0) {
+			/* brc	<mask^15>,<jf> */
+			offset = addrs[i + filter->jf] + jit->start - jit->prg;
+			EMIT4_PCREL(0xa7040000 | (mask ^ 0xf00000), offset);
+		}
+		break;
+	case BPF_S_JMP_JSET_K: /* ip += (A & K) ? jt : jf */
+		mask = 0x700000; /* jnz */
+		/* Emit test if the branch targets are different */
+		if (filter->jt != filter->jf) {
+			if (K > 65535) {
+				/* lr %r4,%r5 */
+				EMIT2(0x1845);
+				/* n %r4,<d(K)>(%r13) */
+				EMIT4_DISP(0x5440d000, EMIT_CONST(K));
+			} else
+				/* tmll %r5,K */
+				EMIT4_IMM(0xa7510000, K);
+		}
+		goto branch;
+	case BPF_S_JMP_JGT_X: /* ip += (A > X) ? jt : jf */
+		mask = 0x200000; /* jh */
+		goto xbranch;
+	case BPF_S_JMP_JGE_X: /* ip += (A >= X) ? jt : jf */
+		mask = 0xa00000; /* jhe */
+		goto xbranch;
+	case BPF_S_JMP_JEQ_X: /* ip += (A == X) ? jt : jf */
+		mask = 0x800000; /* je */
+xbranch:	/* Emit compare if the branch targets are different */
+		if (filter->jt != filter->jf) {
+			jit->seen |= SEEN_XREG;
+			/* cr %r5,%r12 */
+			EMIT2(0x195c);
+		}
+		goto branch;
+	case BPF_S_JMP_JSET_X: /* ip += (A & X) ? jt : jf */
+		mask = 0x700000; /* jnz */
+		/* Emit test if the branch targets are different */
+		if (filter->jt != filter->jf) {
+			jit->seen |= SEEN_XREG;
+			/* lr %r4,%r5 */
+			EMIT2(0x1845);
+			/* nr %r4,%r12 */
+			EMIT2(0x144c);
+		}
+		goto branch;
+	case BPF_S_LD_W_ABS: /* A = *(u32 *) (skb->data+K) */
+		jit->seen |= SEEN_DATAREF | SEEN_RET0 | SEEN_LOAD_WORD;
+		offset = jit->off_load_word;
+		goto load_abs;
+	case BPF_S_LD_H_ABS: /* A = *(u16 *) (skb->data+K) */
+		jit->seen |= SEEN_DATAREF | SEEN_RET0 | SEEN_LOAD_HALF;
+		offset = jit->off_load_half;
+		goto load_abs;
+	case BPF_S_LD_B_ABS: /* A = *(u8 *) (skb->data+K) */
+		jit->seen |= SEEN_DATAREF | SEEN_RET0 | SEEN_LOAD_BYTE;
+		offset = jit->off_load_byte;
+load_abs:	if ((int) K < 0)
+			goto out;
+call_fn:	/* lg %r1,<d(function)>(%r13) */
+		EMIT6_DISP(0xe310d000, 0x0004, offset);
+		/* l %r3,<d(K)>(%r13) */
+		EMIT4_DISP(0x5830d000, EMIT_CONST(K));
+		/* basr %r8,%r1 */
+		EMIT2(0x0d81);
+		/* jnz <ret0> */
+		EMIT4_PCREL(0xa7740000, (jit->ret0_ip - jit->prg));
+		break;
+	case BPF_S_LD_W_IND: /* A = *(u32 *) (skb->data+K+X) */
+		jit->seen |= SEEN_DATAREF | SEEN_RET0 | SEEN_LOAD_IWORD;
+		offset = jit->off_load_iword;
+		goto call_fn;
+	case BPF_S_LD_H_IND: /* A = *(u16 *) (skb->data+K+X) */
+		jit->seen |= SEEN_DATAREF | SEEN_RET0 | SEEN_LOAD_IHALF;
+		offset = jit->off_load_ihalf;
+		goto call_fn;
+	case BPF_S_LD_B_IND: /* A = *(u8 *) (skb->data+K+X) */
+		jit->seen |= SEEN_DATAREF | SEEN_RET0 | SEEN_LOAD_IBYTE;
+		offset = jit->off_load_ibyte;
+		goto call_fn;
+	case BPF_S_LDX_B_MSH:
+		/* X = (*(u8 *)(skb->data+K) & 0xf) << 2 */
+		jit->seen |= SEEN_RET0;
+		if ((int) K < 0) {
+			/* j <ret0> */
+			EMIT4_PCREL(0xa7f40000, (jit->ret0_ip - jit->prg));
+			break;
+		}
+		jit->seen |= SEEN_DATAREF | SEEN_LOAD_BMSH;
+		offset = jit->off_load_bmsh;
+		goto call_fn;
+	case BPF_S_LD_W_LEN: /*	A = skb->len; */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
+		/* l %r5,<d(len)>(%r2) */
+		EMIT4_DISP(0x58502000, offsetof(struct sk_buff, len));
+		break;
+	case BPF_S_LDX_W_LEN: /* X = skb->len; */
+		jit->seen |= SEEN_XREG;
+		/* l %r12,<d(len)>(%r2) */
+		EMIT4_DISP(0x58c02000, offsetof(struct sk_buff, len));
+		break;
+	case BPF_S_LD_IMM: /* A = K */
+		if (K <= 16383)
+			/* lhi %r5,K */
+			EMIT4_IMM(0xa7580000, K);
+		else if (test_facility(21))
+			/* llilf %r5,<K> */
+			EMIT6_IMM(0xc05f0000, K);
+		else
+			/* l %r5,<d(K)>(%r13) */
+			EMIT4_DISP(0x5850d000, EMIT_CONST(K));
+		break;
+	case BPF_S_LDX_IMM: /* X = K */
+		jit->seen |= SEEN_XREG;
+		if (K <= 16383)
+			/* lhi %r12,<K> */
+			EMIT4_IMM(0xa7c80000, K);
+		else if (test_facility(21))
+			/* llilf %r12,<K> */
+			EMIT6_IMM(0xc0cf0000, K);
+		else
+			/* l %r12,<d(K)>(%r13) */
+			EMIT4_DISP(0x58c0d000, EMIT_CONST(K));
+		break;
+	case BPF_S_LD_MEM: /* A = mem[K] */
+		jit->seen |= SEEN_MEM;
+		/* l %r5,<K>(%r15) */
+		EMIT4_DISP(0x5850f000,
+			   (jit->seen & SEEN_DATAREF) ? 160 + K*4 : K*4);
+		break;
+	case BPF_S_LDX_MEM: /* X = mem[K] */
+		jit->seen |= SEEN_XREG | SEEN_MEM;
+		/* l %r12,<K>(%r15) */
+		EMIT4_DISP(0x58c0f000,
+			   (jit->seen & SEEN_DATAREF) ? 160 + K*4 : K*4);
+		break;
+	case BPF_S_MISC_TAX: /* X = A */
+		jit->seen |= SEEN_XREG;
+		/* lr %r12,%r5 */
+		EMIT2(0x18c5);
+		break;
+	case BPF_S_MISC_TXA: /* A = X */
+		jit->seen |= SEEN_XREG;
+		/* lr %r5,%r12 */
+		EMIT2(0x185c);
+		break;
+	case BPF_S_RET_K:
+		if (K == 0) {
+			jit->seen |= SEEN_RET0;
+			if (last)
+				break;
+			/* j <ret0> */
+			EMIT4_PCREL(0xa7f40000, jit->ret0_ip - jit->prg);
+		} else {
+			if (K <= 16383)
+				/* lghi %r2,K */
+				EMIT4_IMM(0xa7290000, K);
+			else
+				/* llgf %r2,<K>(%r13) */
+				EMIT6_DISP(0xe320d000, 0x0016, EMIT_CONST(K));
+			/* j <exit> */
+			if (last && !(jit->seen & SEEN_RET0))
+				break;
+			EMIT4_PCREL(0xa7f40000, jit->exit_ip - jit->prg);
+		}
+		break;
+	case BPF_S_RET_A:
+		/* llgfr %r2,%r5 */
+		EMIT4(0xb9160025);
+		/* j <exit> */
+		EMIT4_PCREL(0xa7f40000, jit->exit_ip - jit->prg);
+		break;
+	case BPF_S_ST: /* mem[K] = A */
+		jit->seen |= SEEN_MEM;
+		/* st %r5,<K>(%r15) */
+		EMIT4_DISP(0x5050f000,
+			   (jit->seen & SEEN_DATAREF) ? 160 + K*4 : K*4);
+		break;
+	case BPF_S_STX: /* mem[K] = X : mov %ebx,off8(%rbp) */
+		jit->seen |= SEEN_XREG | SEEN_MEM;
+		/* st %r12,<K>(%r15) */
+		EMIT4_DISP(0x50c0f000,
+			   (jit->seen & SEEN_DATAREF) ? 160 + K*4 : K*4);
+		break;
+	case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, protocol) != 2);
+		/* lhi %r5,0 */
+		EMIT4(0xa7580000);
+		/* icm	%r5,3,<d(protocol)>(%r2) */
+		EMIT4_DISP(0xbf532000, offsetof(struct sk_buff, protocol));
+		break;
+	case BPF_S_ANC_IFINDEX:	/* if (!skb->dev) return 0;
+				 * A = skb->dev->ifindex */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
+		jit->seen |= SEEN_RET0;
+		/* lg %r1,<d(dev)>(%r2) */
+		EMIT6_DISP(0xe3102000, 0x0004, offsetof(struct sk_buff, dev));
+		/* ltgr %r1,%r1 */
+		EMIT4(0xb9020011);
+		/* jz <ret0> */
+		EMIT4_PCREL(0xa7840000, jit->ret0_ip - jit->prg);
+		/* l %r5,<d(ifindex)>(%r1) */
+		EMIT4_DISP(0x58501000, offsetof(struct net_device, ifindex));
+		break;
+	case BPF_S_ANC_MARK: /* A = skb->mark */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
+		/* l %r5,<d(mark)>(%r2) */
+		EMIT4_DISP(0x58502000, offsetof(struct sk_buff, mark));
+		break;
+	case BPF_S_ANC_QUEUE: /* A = skb->queue_mapping */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, queue_mapping) != 2);
+		/* lhi %r5,0 */
+		EMIT4(0xa7580000);
+		/* icm	%r5,3,<d(queue_mapping)>(%r2) */
+		EMIT4_DISP(0xbf532000, offsetof(struct sk_buff, queue_mapping));
+		break;
+	case BPF_S_ANC_HATYPE:	/* if (!skb->dev) return 0;
+				 * A = skb->dev->type */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, type) != 2);
+		jit->seen |= SEEN_RET0;
+		/* lg %r1,<d(dev)>(%r2) */
+		EMIT6_DISP(0xe3102000, 0x0004, offsetof(struct sk_buff, dev));
+		/* ltgr %r1,%r1 */
+		EMIT4(0xb9020011);
+		/* jz <ret0> */
+		EMIT4_PCREL(0xa7840000, jit->ret0_ip - jit->prg);
+		/* lhi %r5,0 */
+		EMIT4(0xa7580000);
+		/* icm	%r5,3,<d(type)>(%r1) */
+		EMIT4_DISP(0xbf531000, offsetof(struct net_device, type));
+		break;
+	case BPF_S_ANC_RXHASH: /* A = skb->rxhash */
+		BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
+		/* l %r5,<d(rxhash)>(%r2) */
+		EMIT4_DISP(0x58502000, offsetof(struct sk_buff, rxhash));
+		break;
+	case BPF_S_ANC_CPU: /* A = smp_processor_id() */
+#ifdef CONFIG_SMP
+		/* l %r5,<d(cpu_nr)> */
+		EMIT4_DISP(0x58500000, offsetof(struct _lowcore, cpu_nr));
+#else
+		/* lhi %r5,0 */
+		EMIT4(0xa7580000);
+#endif
+		break;
+	default: /* too complex, give up */
+		goto out;
+	}
+	addrs[i] = jit->prg - jit->start;
+	return 0;
+out:
+	return -1;
+}
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+	unsigned long size, prg_len, lit_len;
+	struct bpf_jit jit, cjit;
+	unsigned int *addrs;
+	int pass, i;
+
+	if (!bpf_jit_enable)
+		return;
+	addrs = kmalloc(fp->len * sizeof(*addrs), GFP_KERNEL);
+	if (addrs == NULL)
+		return;
+	memset(addrs, 0, fp->len * sizeof(*addrs));
+	memset(&jit, 0, sizeof(cjit));
+	memset(&cjit, 0, sizeof(cjit));
+
+	for (pass = 0; pass < 10; pass++) {
+		jit.prg = jit.start;
+		jit.lit = jit.mid;
+
+		bpf_jit_prologue(&jit);
+		bpf_jit_noleaks(&jit, fp->insns);
+		for (i = 0; i < fp->len; i++) {
+			if (bpf_jit_insn(&jit, fp->insns + i, addrs, i,
+					 i == fp->len - 1))
+				goto out;
+		}
+		bpf_jit_epilogue(&jit);
+		if (jit.start) {
+			WARN_ON(jit.prg > cjit.prg || jit.lit > cjit.lit);
+			if (memcmp(&jit, &cjit, sizeof(jit)) == 0)
+				break;
+		} else if (jit.prg == cjit.prg && jit.lit == cjit.lit) {
+			prg_len = jit.prg - jit.start;
+			lit_len = jit.lit - jit.mid;
+			size = max_t(unsigned long, prg_len + lit_len,
+				     sizeof(struct work_struct));
+			if (size >= BPF_SIZE_MAX)
+				goto out;
+			jit.start = module_alloc(size);
+			if (!jit.start)
+				goto out;
+			jit.prg = jit.mid = jit.start + prg_len;
+			jit.lit = jit.end = jit.start + prg_len + lit_len;
+			jit.base_ip += (unsigned long) jit.start;
+			jit.exit_ip += (unsigned long) jit.start;
+			jit.ret0_ip += (unsigned long) jit.start;
+		}
+		cjit = jit;
+	}
+	if (bpf_jit_enable > 1) {
+		pr_err("flen=%d proglen=%lu pass=%d image=%p\n",
+		       fp->len, jit.end - jit.start, pass, jit.start);
+		if (jit.start) {
+			printk(KERN_ERR "JIT code:\n");
+			print_fn_code(jit.start, jit.mid - jit.start);
+			print_hex_dump(KERN_ERR, "JIT literals:\n",
+				       DUMP_PREFIX_ADDRESS, 16, 1,
+				       jit.mid, jit.end - jit.mid, false);
+		}
+	}
+	if (jit.start)
+		fp->bpf_func = (void *) jit.start;
+out:
+	kfree(addrs);
+}
+
+static void jit_free_defer(struct work_struct *arg)
+{
+	module_free(NULL, arg);
+}
+
+/* run from softirq, we must use a work_struct to call
+ * module_free() from process context
+ */
+void bpf_jit_free(struct sk_filter *fp)
+{
+	struct work_struct *work;
+
+	if (fp->bpf_func == sk_run_filter)
+		return;
+	work = (struct work_struct *)fp->bpf_func;
+	INIT_WORK(work, jit_free_defer);
+	schedule_work(work);
+}
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index a1e9d69a9c90..584b93674ea4 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -169,7 +169,7 @@ static ssize_t hw_interval_write(struct file *file, char const __user *buf,
 	if (*offset)
 		return -EINVAL;
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 	if (val < oprofile_min_interval)
 		oprofile_hw_interval = oprofile_min_interval;
@@ -212,7 +212,7 @@ static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 	if (val != 0)
 		return -EINVAL;
@@ -243,7 +243,7 @@ static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (val != 0 && val != 1)
@@ -278,7 +278,7 @@ static ssize_t hwsampler_user_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (val != 0 && val != 1)
@@ -317,7 +317,7 @@ static ssize_t timer_enabled_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (val != 0 && val != 1)
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index ba0f412920be..461c23747491 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -5,6 +5,7 @@ config SCORE
        select HAVE_GENERIC_HARDIRQS
        select GENERIC_IRQ_SHOW
        select GENERIC_IOMAP
+       select GENERIC_ATOMIC64
        select HAVE_MEMBLOCK
        select HAVE_MEMBLOCK_NODE_MAP
        select ARCH_DISCARD_MEMBLOCK
diff --git a/arch/score/include/asm/elf.h b/arch/score/include/asm/elf.h
index f478ce94181f..5d566c7a0af2 100644
--- a/arch/score/include/asm/elf.h
+++ b/arch/score/include/asm/elf.h
@@ -54,7 +54,7 @@ typedef elf_fpreg_t	elf_fpregset_t;
 
 #define SET_PERSONALITY(ex)					\
 do {								\
-	set_personality(PER_LINUX);				\
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK))); \
 } while (0)
 
 struct task_struct;
diff --git a/arch/score/include/asm/unistd.h b/arch/score/include/asm/unistd.h
index 4aa957364d4d..a862384e9c16 100644
--- a/arch/score/include/asm/unistd.h
+++ b/arch/score/include/asm/unistd.h
@@ -1,6 +1,3 @@
-#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL)
-#define _ASM_SCORE_UNISTD_H
-
 #define __ARCH_HAVE_MMU
 
 #define __ARCH_WANT_SYSCALL_NO_AT
@@ -9,5 +6,3 @@
 #define __ARCH_WANT_SYSCALL_DEPRECATED
 
 #include <asm-generic/unistd.h>
-
-#endif /* _ASM_SCORE_UNISTD_H */
diff --git a/arch/score/include/uapi/asm/Kbuild b/arch/score/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/score/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
index 2707023c7563..637970cfd3f4 100644
--- a/arch/score/kernel/process.c
+++ b/arch/score/kernel/process.c
@@ -27,6 +27,7 @@
 #include <linux/reboot.h>
 #include <linux/elfcore.h>
 #include <linux/pm.h>
+#include <linux/rcupdate.h>
 
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
@@ -50,9 +51,10 @@ void __noreturn cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched())
 			barrier();
-
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 	}
 }
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index e478bf9a7e91..21e867974066 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -112,6 +112,7 @@ score_execve(struct pt_regs *regs)
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
  */
+asmlinkage
 int kernel_execve(const char *filename,
 		  const char *const argv[],
 		  const char *const envp[])
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 4c171f13b0e8..b22565623142 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -335,7 +335,7 @@ static int dmae_irq_init(void)
 
 	for (n = 0; n < NR_DMAE; n++) {
 		int i = request_irq(get_dma_error_irq(n), dma_err,
-				    IRQF_SHARED, dmae_name[n], NULL);
+				    IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]);
 		if (unlikely(i < 0)) {
 			printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
 			return i;
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 40db2d0aef3f..a7e078f2e2e4 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -192,11 +192,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return pci_enable_resources(dev, mask);
 }
 
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 static void __init
 pcibios_bus_report_status_early(struct pci_channel *hose,
 				int top_bus, int current_bus,
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index 637b79b09657..5bfb341cc5c4 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -107,7 +107,7 @@ static int switch_drv_remove(struct platform_device *pdev)
 		device_remove_file(&pdev->dev, &dev_attr_switch);
 
 	platform_set_drvdata(pdev, NULL);
-	flush_work_sync(&psw->work);
+	flush_work(&psw->work);
 	del_timer_sync(&psw->debounce);
 	free_irq(irq, pdev);
 
diff --git a/arch/sh/include/asm/bl_bit.h b/arch/sh/include/asm/bl_bit.h
index 45e6b9fc37a0..06e4163c6746 100644
--- a/arch/sh/include/asm/bl_bit.h
+++ b/arch/sh/include/asm/bl_bit.h
@@ -2,9 +2,9 @@
 #define __ASM_SH_BL_BIT_H
 
 #ifdef CONFIG_SUPERH32
-# include "bl_bit_32.h"
+# include <asm/bl_bit_32.h>
 #else
-# include "bl_bit_64.h"
+# include <asm/bl_bit_64.h>
 #endif
 
 #endif /* __ASM_SH_BL_BIT_H */
diff --git a/arch/sh/include/asm/cache_insns.h b/arch/sh/include/asm/cache_insns.h
index d25fbe53090d..355cb06b7a30 100644
--- a/arch/sh/include/asm/cache_insns.h
+++ b/arch/sh/include/asm/cache_insns.h
@@ -3,9 +3,9 @@
 
 
 #ifdef CONFIG_SUPERH32
-# include "cache_insns_32.h"
+# include <asm/cache_insns_32.h>
 #else
-# include "cache_insns_64.h"
+# include <asm/cache_insns_64.h>
 #endif
 
 #endif /* __ASM_SH_CACHE_INSNS_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
index fc26d1f4b590..34ae26204524 100644
--- a/arch/sh/include/asm/checksum.h
+++ b/arch/sh/include/asm/checksum.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_SUPERH32
-# include "checksum_32.h"
+# include <asm/checksum_32.h>
 #else
 # include <asm-generic/checksum.h>
 #endif
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
index f38112be67d2..37924afa8d8a 100644
--- a/arch/sh/include/asm/elf.h
+++ b/arch/sh/include/asm/elf.h
@@ -183,7 +183,8 @@ do {									\
 } while (0)
 #endif
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
 
 #ifdef CONFIG_VSYSCALL
 /* vDSO has arch_setup_additional_pages */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 0cf60a628814..73a23f4617a3 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -134,7 +134,7 @@ __BUILD_MEMORY_STRING(__raw_, q, u64)
  * load/store instructions. sh_io_port_base is the virtual address to
  * which all ports are being mapped.
  */
-extern const unsigned long sh_io_port_base;
+extern unsigned long sh_io_port_base;
 
 static inline void __set_io_port_base(unsigned long pbase)
 {
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 384c7471a374..21c5088788da 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -46,9 +46,9 @@
 #define MMU_VPN_MASK	0xfffff000
 
 #if defined(CONFIG_SUPERH32)
-#include "mmu_context_32.h"
+#include <asm/mmu_context_32.h>
 #else
-#include "mmu_context_64.h"
+#include <asm/mmu_context_64.h>
 #endif
 
 /*
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
index 4eeb723aee7e..f08449bcbde7 100644
--- a/arch/sh/include/asm/posix_types.h
+++ b/arch/sh/include/asm/posix_types.h
@@ -1,13 +1,13 @@
 #ifdef __KERNEL__
 # ifdef CONFIG_SUPERH32
-#  include "posix_types_32.h"
+#  include <asm/posix_types_32.h>
 # else
-#  include "posix_types_64.h"
+#  include <asm/posix_types_64.h>
 # endif
 #else
 # ifdef __SH5__
-#  include "posix_types_64.h"
+#  include <asm/posix_types_64.h>
 # else
-#  include "posix_types_32.h"
+#  include <asm/posix_types_32.h>
 # endif
 #endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 3d14aeaef57c..5448f9bbf4ab 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -175,9 +175,9 @@ extern unsigned int instruction_size(unsigned int insn);
 #endif /* __ASSEMBLY__ */
 
 #ifdef CONFIG_SUPERH32
-# include "processor_32.h"
+# include <asm/processor_32.h>
 #else
-# include "processor_64.h"
+# include <asm/processor_64.h>
 #endif
 
 #endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index c7b7e1ed194a..a4a38dff997a 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -25,9 +25,9 @@
 #define PT_TEXT_LEN		252
 
 #if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-#include "ptrace_64.h"
+#include <asm/ptrace_64.h>
 #else
-#include "ptrace_32.h"
+#include <asm/ptrace_32.h>
 #endif
 
 #ifdef __KERNEL__
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 4a5350037c8f..1b6199740e98 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -6,7 +6,6 @@
 extern long __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
-extern char _ebss[];
 extern char __start_eh_frame[], __stop_eh_frame[];
 
 #endif /* __ASM_SH_SECTIONS_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
index 8c1ea21dc0ae..114011fa08af 100644
--- a/arch/sh/include/asm/string.h
+++ b/arch/sh/include/asm/string.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_SUPERH32
-# include "string_32.h"
+# include <asm/string_32.h>
 #else
-# include "string_64.h"
+# include <asm/string_64.h>
 #endif
diff --git a/arch/sh/include/asm/switch_to.h b/arch/sh/include/asm/switch_to.h
index 62b1941813e3..bcd722fc8347 100644
--- a/arch/sh/include/asm/switch_to.h
+++ b/arch/sh/include/asm/switch_to.h
@@ -11,9 +11,9 @@
 #define __ASM_SH_SWITCH_TO_H
 
 #ifdef CONFIG_SUPERH32
-# include "switch_to_32.h"
+# include <asm/switch_to_32.h>
 #else
-# include "switch_to_64.h"
+# include <asm/switch_to_64.h>
 #endif
 
 #endif /* __ASM_SH_SWITCH_TO_H */
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
index aa7777bdc370..847128da6eac 100644
--- a/arch/sh/include/asm/syscall.h
+++ b/arch/sh/include/asm/syscall.h
@@ -4,9 +4,9 @@
 extern const unsigned long sys_call_table[];
 
 #ifdef CONFIG_SUPERH32
-# include "syscall_32.h"
+# include <asm/syscall_32.h>
 #else
-# include "syscall_64.h"
+# include <asm/syscall_64.h>
 #endif
 
 #endif /* __ASM_SH_SYSCALL_H */
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
index 507725af2e54..3dbfef06f6b2 100644
--- a/arch/sh/include/asm/syscalls.h
+++ b/arch/sh/include/asm/syscalls.h
@@ -11,9 +11,9 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long fd, unsigned long pgoff);
 
 #ifdef CONFIG_SUPERH32
-# include "syscalls_32.h"
+# include <asm/syscalls_32.h>
 #else
-# include "syscalls_64.h"
+# include <asm/syscalls_64.h>
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index ec88bfcdf7ce..e61d43d9f689 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -2,7 +2,7 @@
 #define __ASM_SH_TLB_H
 
 #ifdef CONFIG_SUPERH64
-# include "tlb_64.h"
+# include <asm/tlb_64.h>
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sh/include/asm/traps.h b/arch/sh/include/asm/traps.h
index afd9df8d0641..9cc149a0dbd1 100644
--- a/arch/sh/include/asm/traps.h
+++ b/arch/sh/include/asm/traps.h
@@ -4,9 +4,9 @@
 #include <linux/compiler.h>
 
 #ifdef CONFIG_SUPERH32
-# include "traps_32.h"
+# include <asm/traps_32.h>
 #else
-# include "traps_64.h"
+# include <asm/traps_64.h>
 #endif
 
 BUILD_TRAP_HANDLER(address_error);
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 8698a80ed00c..9486376605f4 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -97,9 +97,9 @@ struct __large_struct { unsigned long buf[100]; };
 })
 
 #ifdef CONFIG_SUPERH32
-# include "uaccess_32.h"
+# include <asm/uaccess_32.h>
 #else
-# include "uaccess_64.h"
+# include <asm/uaccess_64.h>
 #endif
 
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
index 7bc67076baac..307201a854f3 100644
--- a/arch/sh/include/asm/unistd.h
+++ b/arch/sh/include/asm/unistd.h
@@ -1,8 +1,8 @@
 #ifdef __KERNEL__
 # ifdef CONFIG_SUPERH32
-#  include "unistd_32.h"
+#  include <asm/unistd_32.h>
 # else
-#  include "unistd_64.h"
+#  include <asm/unistd_64.h>
 # endif
 
 # define __ARCH_WANT_SYS_RT_SIGSUSPEND
@@ -40,8 +40,8 @@
 
 #else
 # ifdef __SH5__
-#  include "unistd_64.h"
+#  include <asm/unistd_64.h>
 # else
-#  include "unistd_32.h"
+#  include <asm/unistd_32.h>
 # endif
 #endif
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index 48d14498e774..2a0ca8780f0d 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -183,18 +183,30 @@ enum {
 	GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
 	GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
 	GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
-	GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22,
-	GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20,
-	GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18,
-	GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16,
-	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
-	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
-	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
-	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
-	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
-	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
-	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
-	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+	GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22,
+	GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20,
+	GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18,
+	GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16,
+	GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14,
+	GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12,
+	GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10,
+	GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8,
+	GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6,
+	GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4,
+	GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2,
+	GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0,
+	GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22,
+	GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20,
+	GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18,
+	GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16,
+	GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14,
+	GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12,
+	GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10,
+	GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8,
+	GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6,
+	GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4,
+	GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2,
+	GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0,
 	GPIO_FN_LCD_M_DISP,
 };
 
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index d63ef51ec186..60f3e8af05fa 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -6,7 +6,7 @@
  */
 
 #include <asm/romimage-macros.h>
-#include "partner-jet-setup.txt"
+#include <mach/partner-jet-setup.txt>
 
 	/* execute icbi after enabling cache */
 	mov.l	1f, r0
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index 7a883167c846..1afae21ced5f 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -6,7 +6,7 @@
  */
 
 #include <asm/romimage-macros.h>
-#include "partner-jet-setup.txt"
+#include <mach/partner-jet-setup.txt>
 
 	/* execute icbi after enabling cache */
 	mov.l	1f, r0
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/sh/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
index f25127c46eca..039e4587dd9b 100644
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
+++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
@@ -758,12 +758,22 @@ enum {
 	DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
 	LCD_CLK_MARK, LCD_EXTCLK_MARK,
 	LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
-	LCD_DATA23_MARK, LCD_DATA22_MARK, LCD_DATA21_MARK, LCD_DATA20_MARK,
-	LCD_DATA19_MARK, LCD_DATA18_MARK, LCD_DATA17_MARK, LCD_DATA16_MARK,
-	LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
-	LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
-	LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
-	LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
+	LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK,
+	LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK,
+	LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK,
+	LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK,
+	LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK,
+	LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK,
+	LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK,
+	LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK,
+	LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK,
+	LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK,
+	LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK,
+	LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK,
+	LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK,
+	LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK,
+	LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK,
+	LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK,
 	LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK,
 	LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK,
 	LCD_M_DISP_MARK,
@@ -1036,6 +1046,7 @@ static pinmux_enum_t pinmux_data[] = {
 
 	PINMUX_DATA(PF1_DATA, PF1MD_000),
 	PINMUX_DATA(BACK_MARK, PF1MD_001),
+	PINMUX_DATA(SSL10_MARK, PF1MD_011),
 	PINMUX_DATA(TIOC4B_MARK, PF1MD_100),
 	PINMUX_DATA(DACK0_MARK, PF1MD_101),
 
@@ -1049,47 +1060,50 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(PG27_DATA, PG27MD_00),
 	PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10),
 	PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11),
+	PINMUX_DATA(LCD_DE_MARK, PG27MD_11),
 
 	PINMUX_DATA(PG26_DATA, PG26MD_00),
 	PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10),
+	PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10),
 
 	PINMUX_DATA(PG25_DATA, PG25MD_00),
 	PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10),
+	PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10),
 
 	PINMUX_DATA(PG24_DATA, PG24MD_00),
 	PINMUX_DATA(LCD_CLK_MARK, PG24MD_10),
 
 	PINMUX_DATA(PG23_DATA, PG23MD_000),
-	PINMUX_DATA(LCD_DATA23_MARK, PG23MD_010),
+	PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011),
 	PINMUX_DATA(TXD5_MARK, PG23MD_100),
 
 	PINMUX_DATA(PG22_DATA, PG22MD_000),
-	PINMUX_DATA(LCD_DATA22_MARK, PG22MD_010),
+	PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011),
 	PINMUX_DATA(RXD5_MARK, PG22MD_100),
 
 	PINMUX_DATA(PG21_DATA, PG21MD_000),
 	PINMUX_DATA(DV_DATA7_MARK, PG21MD_001),
-	PINMUX_DATA(LCD_DATA21_MARK, PG21MD_010),
+	PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011),
 	PINMUX_DATA(TXD4_MARK, PG21MD_100),
 
 	PINMUX_DATA(PG20_DATA, PG20MD_000),
 	PINMUX_DATA(DV_DATA6_MARK, PG20MD_001),
-	PINMUX_DATA(LCD_DATA20_MARK, PG21MD_010),
+	PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011),
 	PINMUX_DATA(RXD4_MARK, PG20MD_100),
 
 	PINMUX_DATA(PG19_DATA, PG19MD_000),
 	PINMUX_DATA(DV_DATA5_MARK, PG19MD_001),
-	PINMUX_DATA(LCD_DATA19_MARK, PG19MD_010),
+	PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010),
 	PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011),
 	PINMUX_DATA(SCK5_MARK, PG19MD_100),
 
 	PINMUX_DATA(PG18_DATA, PG18MD_000),
 	PINMUX_DATA(DV_DATA4_MARK, PG18MD_001),
-	PINMUX_DATA(LCD_DATA18_MARK, PG18MD_010),
+	PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010),
 	PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011),
 	PINMUX_DATA(SCK4_MARK, PG18MD_100),
 
@@ -1097,103 +1111,103 @@ static pinmux_enum_t pinmux_data[] = {
 // we're going with 2 bits
 	PINMUX_DATA(PG17_DATA, PG17MD_00),
 	PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01),
-	PINMUX_DATA(LCD_DATA17_MARK, PG17MD_10),
+	PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10),
 
 // TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description
 // we're going with 2 bits
 	PINMUX_DATA(PG16_DATA, PG16MD_00),
 	PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01),
-	PINMUX_DATA(LCD_DATA16_MARK, PG16MD_10),
+	PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10),
 
 	PINMUX_DATA(PG15_DATA, PG15MD_00),
 	PINMUX_DATA(D31_MARK, PG15MD_01),
-	PINMUX_DATA(LCD_DATA15_MARK, PG15MD_10),
+	PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10),
 	PINMUX_DATA(PINT7_PG_MARK, PG15MD_11),
 
 	PINMUX_DATA(PG14_DATA, PG14MD_00),
 	PINMUX_DATA(D30_MARK, PG14MD_01),
-	PINMUX_DATA(LCD_DATA14_MARK, PG14MD_10),
+	PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10),
 	PINMUX_DATA(PINT6_PG_MARK, PG14MD_11),
 
 	PINMUX_DATA(PG13_DATA, PG13MD_00),
 	PINMUX_DATA(D29_MARK, PG13MD_01),
-	PINMUX_DATA(LCD_DATA13_MARK, PG13MD_10),
+	PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10),
 	PINMUX_DATA(PINT5_PG_MARK, PG13MD_11),
 
 	PINMUX_DATA(PG12_DATA, PG12MD_00),
 	PINMUX_DATA(D28_MARK, PG12MD_01),
-	PINMUX_DATA(LCD_DATA12_MARK, PG12MD_10),
+	PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10),
 	PINMUX_DATA(PINT4_PG_MARK, PG12MD_11),
 
 	PINMUX_DATA(PG11_DATA, PG11MD_000),
 	PINMUX_DATA(D27_MARK, PG11MD_001),
-	PINMUX_DATA(LCD_DATA11_MARK, PG11MD_010),
+	PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010),
 	PINMUX_DATA(PINT3_PG_MARK, PG11MD_011),
 	PINMUX_DATA(TIOC3D_MARK, PG11MD_100),
 
 	PINMUX_DATA(PG10_DATA, PG10MD_000),
 	PINMUX_DATA(D26_MARK, PG10MD_001),
-	PINMUX_DATA(LCD_DATA10_MARK, PG10MD_010),
+	PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010),
 	PINMUX_DATA(PINT2_PG_MARK, PG10MD_011),
 	PINMUX_DATA(TIOC3C_MARK, PG10MD_100),
 
 	PINMUX_DATA(PG9_DATA, PG9MD_000),
 	PINMUX_DATA(D25_MARK, PG9MD_001),
-	PINMUX_DATA(LCD_DATA9_MARK, PG9MD_010),
+	PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010),
 	PINMUX_DATA(PINT1_PG_MARK, PG9MD_011),
 	PINMUX_DATA(TIOC3B_MARK, PG9MD_100),
 
 	PINMUX_DATA(PG8_DATA, PG8MD_000),
 	PINMUX_DATA(D24_MARK, PG8MD_001),
-	PINMUX_DATA(LCD_DATA8_MARK, PG8MD_010),
+	PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010),
 	PINMUX_DATA(PINT0_PG_MARK, PG8MD_011),
 	PINMUX_DATA(TIOC3A_MARK, PG8MD_100),
 
 	PINMUX_DATA(PG7_DATA, PG7MD_000),
 	PINMUX_DATA(D23_MARK, PG7MD_001),
-	PINMUX_DATA(LCD_DATA7_MARK, PG7MD_010),
+	PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010),
 	PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011),
 	PINMUX_DATA(TIOC2B_MARK, PG7MD_100),
 
 	PINMUX_DATA(PG6_DATA, PG6MD_000),
 	PINMUX_DATA(D22_MARK, PG6MD_001),
-	PINMUX_DATA(LCD_DATA6_MARK, PG6MD_010),
+	PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010),
 	PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011),
 	PINMUX_DATA(TIOC2A_MARK, PG6MD_100),
 
 	PINMUX_DATA(PG5_DATA, PG5MD_000),
 	PINMUX_DATA(D21_MARK, PG5MD_001),
-	PINMUX_DATA(LCD_DATA5_MARK, PG5MD_010),
+	PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010),
 	PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011),
 	PINMUX_DATA(TIOC1B_MARK, PG5MD_100),
 
 	PINMUX_DATA(PG4_DATA, PG4MD_000),
 	PINMUX_DATA(D20_MARK, PG4MD_001),
-	PINMUX_DATA(LCD_DATA4_MARK, PG4MD_010),
+	PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010),
 	PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011),
 	PINMUX_DATA(TIOC1A_MARK, PG4MD_100),
 
 	PINMUX_DATA(PG3_DATA, PG3MD_000),
 	PINMUX_DATA(D19_MARK, PG3MD_001),
-	PINMUX_DATA(LCD_DATA3_MARK, PG3MD_010),
+	PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010),
 	PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011),
 	PINMUX_DATA(TIOC0D_MARK, PG3MD_100),
 
 	PINMUX_DATA(PG2_DATA, PG2MD_000),
 	PINMUX_DATA(D18_MARK, PG2MD_001),
-	PINMUX_DATA(LCD_DATA2_MARK, PG2MD_010),
+	PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010),
 	PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011),
 	PINMUX_DATA(TIOC0C_MARK, PG2MD_100),
 
 	PINMUX_DATA(PG1_DATA, PG1MD_000),
 	PINMUX_DATA(D17_MARK, PG1MD_001),
-	PINMUX_DATA(LCD_DATA1_MARK, PG1MD_010),
+	PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010),
 	PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011),
 	PINMUX_DATA(TIOC0B_MARK, PG1MD_100),
 
 	PINMUX_DATA(PG0_DATA, PG0MD_000),
 	PINMUX_DATA(D16_MARK, PG0MD_001),
-	PINMUX_DATA(LCD_DATA0_MARK, PG0MD_010),
+	PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010),
 	PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011),
 	PINMUX_DATA(TIOC0A_MARK, PG0MD_100),
 
@@ -1275,14 +1289,14 @@ static pinmux_enum_t pinmux_data[] = {
 
 	PINMUX_DATA(PJ23_DATA, PJ23MD_000),
 	PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001),
-	PINMUX_DATA(LCD_DATA23_MARK, PJ23MD_010),
+	PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
 	PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
 	PINMUX_DATA(CTX1_MARK, PJ23MD_101),
 
 	PINMUX_DATA(PJ22_DATA, PJ22MD_000),
 	PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
-	PINMUX_DATA(LCD_DATA22_MARK, PJ22MD_010),
+	PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
 	PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
 	PINMUX_DATA(CRX1_MARK, PJ22MD_101),
@@ -1290,14 +1304,14 @@ static pinmux_enum_t pinmux_data[] = {
 
 	PINMUX_DATA(PJ21_DATA, PJ21MD_000),
 	PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
-	PINMUX_DATA(LCD_DATA21_MARK, PJ21MD_010),
+	PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
 	PINMUX_DATA(CTX2_MARK, PJ21MD_101),
 
 	PINMUX_DATA(PJ20_DATA, PJ20MD_000),
 	PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
-	PINMUX_DATA(LCD_DATA20_MARK, PJ20MD_010),
+	PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
 	PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
 	PINMUX_DATA(CRX2_MARK, PJ20MD_101),
@@ -1305,7 +1319,7 @@ static pinmux_enum_t pinmux_data[] = {
 
 	PINMUX_DATA(PJ19_DATA, PJ19MD_000),
 	PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
-	PINMUX_DATA(LCD_DATA19_MARK, PJ19MD_010),
+	PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010),
 	PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011),
 	PINMUX_DATA(TIOC0D_MARK, PJ19MD_100),
 	PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101),
@@ -1313,126 +1327,126 @@ static pinmux_enum_t pinmux_data[] = {
 
 	PINMUX_DATA(PJ18_DATA, PJ18MD_000),
 	PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001),
-	PINMUX_DATA(LCD_DATA18_MARK, PJ18MD_010),
+	PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010),
 	PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011),
 	PINMUX_DATA(TIOC0C_MARK, PJ18MD_100),
 	PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101),
 
 	PINMUX_DATA(PJ17_DATA, PJ17MD_000),
 	PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001),
-	PINMUX_DATA(LCD_DATA17_MARK, PJ17MD_010),
+	PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010),
 	PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011),
 	PINMUX_DATA(TIOC0B_MARK, PJ17MD_100),
 	PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101),
 
 	PINMUX_DATA(PJ16_DATA, PJ16MD_000),
 	PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001),
-	PINMUX_DATA(LCD_DATA16_MARK, PJ16MD_010),
+	PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010),
 	PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011),
 	PINMUX_DATA(TIOC0A_MARK, PJ16MD_100),
 	PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101),
 
 	PINMUX_DATA(PJ15_DATA, PJ15MD_000),
 	PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001),
-	PINMUX_DATA(LCD_DATA15_MARK, PJ15MD_010),
+	PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010),
 	PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011),
 	PINMUX_DATA(PWM2H_MARK, PJ15MD_100),
 	PINMUX_DATA(TXD7_MARK, PJ15MD_101),
 
 	PINMUX_DATA(PJ14_DATA, PJ14MD_000),
 	PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001),
-	PINMUX_DATA(LCD_DATA14_MARK, PJ14MD_010),
+	PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010),
 	PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011),
 	PINMUX_DATA(PWM2G_MARK, PJ14MD_100),
 	PINMUX_DATA(TXD6_MARK, PJ14MD_101),
 
 	PINMUX_DATA(PJ13_DATA, PJ13MD_000),
 	PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001),
-	PINMUX_DATA(LCD_DATA13_MARK, PJ13MD_010),
+	PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010),
 	PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011),
 	PINMUX_DATA(PWM2F_MARK, PJ13MD_100),
 	PINMUX_DATA(TXD5_MARK, PJ13MD_101),
 
 	PINMUX_DATA(PJ12_DATA, PJ12MD_000),
 	PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001),
-	PINMUX_DATA(LCD_DATA12_MARK, PJ12MD_010),
+	PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010),
 	PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011),
 	PINMUX_DATA(PWM2E_MARK, PJ12MD_100),
 	PINMUX_DATA(SCK7_MARK, PJ12MD_101),
 
 	PINMUX_DATA(PJ11_DATA, PJ11MD_000),
 	PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001),
-	PINMUX_DATA(LCD_DATA11_MARK, PJ11MD_010),
+	PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010),
 	PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011),
 	PINMUX_DATA(PWM2D_MARK, PJ11MD_100),
 	PINMUX_DATA(SCK6_MARK, PJ11MD_101),
 
 	PINMUX_DATA(PJ10_DATA, PJ10MD_000),
 	PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001),
-	PINMUX_DATA(LCD_DATA10_MARK, PJ10MD_010),
+	PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010),
 	PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011),
 	PINMUX_DATA(PWM2C_MARK, PJ10MD_100),
 	PINMUX_DATA(SCK5_MARK, PJ10MD_101),
 
 	PINMUX_DATA(PJ9_DATA, PJ9MD_000),
 	PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001),
-	PINMUX_DATA(LCD_DATA9_MARK, PJ9MD_010),
+	PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010),
 	PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011),
 	PINMUX_DATA(PWM2B_MARK, PJ9MD_100),
 	PINMUX_DATA(RTS5_MARK, PJ9MD_101),
 
 	PINMUX_DATA(PJ8_DATA, PJ8MD_000),
 	PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001),
-	PINMUX_DATA(LCD_DATA8_MARK, PJ8MD_010),
+	PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010),
 	PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011),
 	PINMUX_DATA(PWM2A_MARK, PJ8MD_100),
 	PINMUX_DATA(CTS5_MARK, PJ8MD_101),
 
 	PINMUX_DATA(PJ7_DATA, PJ7MD_000),
 	PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001),
-	PINMUX_DATA(LCD_DATA7_MARK, PJ7MD_010),
+	PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010),
 	PINMUX_DATA(SD_D2_MARK, PJ7MD_011),
 	PINMUX_DATA(PWM1H_MARK, PJ7MD_100),
 
 	PINMUX_DATA(PJ6_DATA, PJ6MD_000),
 	PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001),
-	PINMUX_DATA(LCD_DATA6_MARK, PJ6MD_010),
+	PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010),
 	PINMUX_DATA(SD_D3_MARK, PJ6MD_011),
 	PINMUX_DATA(PWM1G_MARK, PJ6MD_100),
 
 	PINMUX_DATA(PJ5_DATA, PJ5MD_000),
 	PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001),
-	PINMUX_DATA(LCD_DATA5_MARK, PJ5MD_010),
+	PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010),
 	PINMUX_DATA(SD_CMD_MARK, PJ5MD_011),
 	PINMUX_DATA(PWM1F_MARK, PJ5MD_100),
 
 	PINMUX_DATA(PJ4_DATA, PJ4MD_000),
 	PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001),
-	PINMUX_DATA(LCD_DATA4_MARK, PJ4MD_010),
+	PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010),
 	PINMUX_DATA(SD_CLK_MARK, PJ4MD_011),
 	PINMUX_DATA(PWM1E_MARK, PJ4MD_100),
 
 	PINMUX_DATA(PJ3_DATA, PJ3MD_000),
 	PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001),
-	PINMUX_DATA(LCD_DATA3_MARK, PJ3MD_010),
+	PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010),
 	PINMUX_DATA(SD_D0_MARK, PJ3MD_011),
 	PINMUX_DATA(PWM1D_MARK, PJ3MD_100),
 
 	PINMUX_DATA(PJ2_DATA, PJ2MD_000),
 	PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001),
-	PINMUX_DATA(LCD_DATA2_MARK, PJ2MD_010),
+	PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010),
 	PINMUX_DATA(SD_D1_MARK, PJ2MD_011),
 	PINMUX_DATA(PWM1C_MARK, PJ2MD_100),
 
 	PINMUX_DATA(PJ1_DATA, PJ1MD_000),
 	PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001),
-	PINMUX_DATA(LCD_DATA1_MARK, PJ1MD_010),
+	PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010),
 	PINMUX_DATA(SD_WP_MARK, PJ1MD_011),
 	PINMUX_DATA(PWM1B_MARK, PJ1MD_100),
 
 	PINMUX_DATA(PJ0_DATA, PJ0MD_000),
 	PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001),
-	PINMUX_DATA(LCD_DATA0_MARK, PJ0MD_010),
+	PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010),
 	PINMUX_DATA(SD_CD_MARK, PJ0MD_011),
 	PINMUX_DATA(PWM1A_MARK, PJ0MD_100),
 };
@@ -1877,30 +1891,55 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	PINMUX_GPIO(GPIO_FN_LCD_HSYNC, LCD_HSYNC_MARK),
 	PINMUX_GPIO(GPIO_FN_LCD_DE, LCD_DE_MARK),
 
-	PINMUX_GPIO(GPIO_FN_LCD_DATA23, LCD_DATA23_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA22, LCD_DATA22_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA21, LCD_DATA21_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA20, LCD_DATA20_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA19, LCD_DATA19_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA18, LCD_DATA18_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA17, LCD_DATA17_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA16, LCD_DATA16_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK),
-	PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA23_PG23, LCD_DATA23_PG23_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA22_PG22, LCD_DATA22_PG22_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA21_PG21, LCD_DATA21_PG21_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA20_PG20, LCD_DATA20_PG20_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA19_PG19, LCD_DATA19_PG19_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA18_PG18, LCD_DATA18_PG18_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA17_PG17, LCD_DATA17_PG17_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA16_PG16, LCD_DATA16_PG16_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA15_PG15, LCD_DATA15_PG15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA14_PG14, LCD_DATA14_PG14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA13_PG13, LCD_DATA13_PG13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA12_PG12, LCD_DATA12_PG12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA11_PG11, LCD_DATA11_PG11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA10_PG10, LCD_DATA10_PG10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA9_PG9, LCD_DATA9_PG9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA8_PG8, LCD_DATA8_PG8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA7_PG7, LCD_DATA7_PG7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA6_PG6, LCD_DATA6_PG6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA5_PG5, LCD_DATA5_PG5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA4_PG4, LCD_DATA4_PG4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA3_PG3, LCD_DATA3_PG3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA2_PG2, LCD_DATA2_PG2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA1_PG1, LCD_DATA1_PG1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA0_PG0, LCD_DATA0_PG0_MARK),
+
+	PINMUX_GPIO(GPIO_FN_LCD_DATA23_PJ23, LCD_DATA23_PJ23_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA22_PJ22, LCD_DATA22_PJ22_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA21_PJ21, LCD_DATA21_PJ21_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA20_PJ20, LCD_DATA20_PJ20_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA19_PJ19, LCD_DATA19_PJ19_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA18_PJ18, LCD_DATA18_PJ18_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA17_PJ17, LCD_DATA17_PJ17_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA16_PJ16, LCD_DATA16_PJ16_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA15_PJ15, LCD_DATA15_PJ15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA14_PJ14, LCD_DATA14_PJ14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA13_PJ13, LCD_DATA13_PJ13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA12_PJ12, LCD_DATA12_PJ12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA11_PJ11, LCD_DATA11_PJ11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA10_PJ10, LCD_DATA10_PJ10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA9_PJ9, LCD_DATA9_PJ9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA8_PJ8, LCD_DATA8_PJ8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA7_PJ7, LCD_DATA7_PJ7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA6_PJ6, LCD_DATA6_PJ6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA5_PJ5, LCD_DATA5_PJ5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA4_PJ4, LCD_DATA4_PJ4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA3_PJ3, LCD_DATA3_PJ3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA2_PJ2, LCD_DATA2_PJ2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA1_PJ1, LCD_DATA1_PJ1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCD_DATA0_PJ0, LCD_DATA0_PJ0_MARK),
 
 	PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK),
 };
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index b7cf6a547f11..7e605b95592a 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -933,7 +933,7 @@ ret_with_reschedule:
 
 	pta	restore_all, tr1
 
-	movi	_TIF_SIGPENDING, r8
+	movi	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8
 	and	r8, r7, r8
 	pta	work_notifysig, tr0
 	bne	r8, ZERO, tr0
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index f67601cb3f1f..b96489d8b27d 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -139,7 +139,7 @@ work_pending:
 	! r8: current_thread_info
 	! t:  result of "tst	#_TIF_NEED_RESCHED, r0"
 	bf/s	work_resched
-	 tst	#_TIF_SIGPENDING, r0
+	 tst	#(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0
 work_notifysig:
 	bt/s	__restore_all
 	 mov	r15, r4
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
index e3ad6103e7c1..cca14ba84a37 100644
--- a/arch/sh/kernel/ioport.c
+++ b/arch/sh/kernel/ioport.c
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-const unsigned long sh_io_port_base __read_mostly = -1;
+unsigned long sh_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(sh_io_port_base);
 
 void __iomem *__ioport_map(unsigned long addr, unsigned int size)
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 7b57bf1dc855..ebe7a7d97215 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p)
 	data_resource.start = virt_to_phys(_etext);
 	data_resource.end = virt_to_phys(_edata)-1;
 	bss_resource.start = virt_to_phys(__bss_start);
-	bss_resource.end = virt_to_phys(_ebss)-1;
+	bss_resource.end = virt_to_phys(__bss_stop)-1;
 
 #ifdef CONFIG_CMDLINE_OVERWRITE
 	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 3896f26efa4a..2a0a596ebf67 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(_ebss);
 EXPORT_SYMBOL(empty_zero_page);
 
 #define DECLARE_EXPORT(name)		\
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index c98905f71e28..db88cbf9eafd 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -78,7 +78,6 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	BSS_SECTION(0, PAGE_SIZE, 4)
-	_ebss = .;			/* uClinux MTD sucks */
 	_end = . ;
 
 	STABS_DEBUG
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 84a57761f17e..60164e65d665 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -39,7 +39,7 @@
  *
  * Make sure the stack pointer contains a valid address. Valid
  * addresses for kernel stacks are anywhere after the bss
- * (after _ebss) and anywhere in init_thread_union (init_stack).
+ * (after __bss_stop) and anywhere in init_thread_union (init_stack).
  */
 #define STACK_CHECK()					\
 	mov	#(THREAD_SIZE >> 10), r0;		\
@@ -60,7 +60,7 @@
 	cmp/hi	r2, r1;					\
 	bf	stack_panic;				\
 							\
-	/* If sp > _ebss then we're OK. */		\
+	/* If sp > __bss_stop then we're OK. */		\
 	mov.l	.L_ebss, r1;				\
 	cmp/hi	r1, r15;				\
 	bt	1f;					\
@@ -70,7 +70,7 @@
 	cmp/hs	r1, r15;				\
 	bf	stack_panic;				\
 							\
-	/* If sp > init_stack && sp < _ebss, not OK. */	\
+	/* If sp > init_stack && sp < __bss_stop, not OK. */	\
 	add	r0, r1;					\
 	cmp/hs	r1, r15;				\
 	bt	stack_panic;				\
@@ -292,8 +292,6 @@ stack_panic:
 	 nop
 
 	.align 2
-.L_ebss:
-	.long	_ebss
 .L_init_thread_union:
 	.long	init_thread_union
 .Lpanic:
diff --git a/arch/sparc/Kbuild b/arch/sparc/Kbuild
index 5cd01161fd00..675afa285ddb 100644
--- a/arch/sparc/Kbuild
+++ b/arch/sparc/Kbuild
@@ -6,3 +6,4 @@ obj-y += kernel/
 obj-y += mm/
 obj-y += math-emu/
 obj-y += net/
+obj-y += crypto/
diff --git a/arch/sparc/crypto/Makefile b/arch/sparc/crypto/Makefile
new file mode 100644
index 000000000000..6ae1ad5e502b
--- /dev/null
+++ b/arch/sparc/crypto/Makefile
@@ -0,0 +1,25 @@
+#
+# Arch-specific CryptoAPI modules.
+#
+
+obj-$(CONFIG_CRYPTO_SHA1_SPARC64) += sha1-sparc64.o
+obj-$(CONFIG_CRYPTO_SHA256_SPARC64) += sha256-sparc64.o
+obj-$(CONFIG_CRYPTO_SHA512_SPARC64) += sha512-sparc64.o
+obj-$(CONFIG_CRYPTO_MD5_SPARC64) += md5-sparc64.o
+
+obj-$(CONFIG_CRYPTO_AES_SPARC64) += aes-sparc64.o
+obj-$(CONFIG_CRYPTO_DES_SPARC64) += des-sparc64.o
+obj-$(CONFIG_CRYPTO_DES_SPARC64) += camellia-sparc64.o
+
+obj-$(CONFIG_CRYPTO_CRC32C_SPARC64) += crc32c-sparc64.o
+
+sha1-sparc64-y := sha1_asm.o sha1_glue.o crop_devid.o
+sha256-sparc64-y := sha256_asm.o sha256_glue.o crop_devid.o
+sha512-sparc64-y := sha512_asm.o sha512_glue.o crop_devid.o
+md5-sparc64-y := md5_asm.o md5_glue.o crop_devid.o
+
+aes-sparc64-y := aes_asm.o aes_glue.o crop_devid.o
+des-sparc64-y := des_asm.o des_glue.o crop_devid.o
+camellia-sparc64-y := camellia_asm.o camellia_glue.o crop_devid.o
+
+crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o crop_devid.o
diff --git a/arch/sparc/crypto/aes_asm.S b/arch/sparc/crypto/aes_asm.S
new file mode 100644
index 000000000000..23f6cbb910d3
--- /dev/null
+++ b/arch/sparc/crypto/aes_asm.S
@@ -0,0 +1,1535 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+#define ENCRYPT_TWO_ROUNDS(KEY_BASE, I0, I1, T0, T1) \
+	AES_EROUND01(KEY_BASE +  0, I0, I1, T0) \
+	AES_EROUND23(KEY_BASE +  2, I0, I1, T1) \
+	AES_EROUND01(KEY_BASE +  4, T0, T1, I0) \
+	AES_EROUND23(KEY_BASE +  6, T0, T1, I1)
+
+#define ENCRYPT_TWO_ROUNDS_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	AES_EROUND01(KEY_BASE +  0, I0, I1, T0) \
+	AES_EROUND23(KEY_BASE +  2, I0, I1, T1) \
+	AES_EROUND01(KEY_BASE +  0, I2, I3, T2) \
+	AES_EROUND23(KEY_BASE +  2, I2, I3, T3) \
+	AES_EROUND01(KEY_BASE +  4, T0, T1, I0) \
+	AES_EROUND23(KEY_BASE +  6, T0, T1, I1) \
+	AES_EROUND01(KEY_BASE +  4, T2, T3, I2) \
+	AES_EROUND23(KEY_BASE +  6, T2, T3, I3)
+
+#define ENCRYPT_TWO_ROUNDS_LAST(KEY_BASE, I0, I1, T0, T1) \
+	AES_EROUND01(KEY_BASE +  0, I0, I1, T0) \
+	AES_EROUND23(KEY_BASE +  2, I0, I1, T1) \
+	AES_EROUND01_L(KEY_BASE +  4, T0, T1, I0) \
+	AES_EROUND23_L(KEY_BASE +  6, T0, T1, I1)
+
+#define ENCRYPT_TWO_ROUNDS_LAST_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	AES_EROUND01(KEY_BASE +  0, I0, I1, T0) \
+	AES_EROUND23(KEY_BASE +  2, I0, I1, T1) \
+	AES_EROUND01(KEY_BASE +  0, I2, I3, T2) \
+	AES_EROUND23(KEY_BASE +  2, I2, I3, T3) \
+	AES_EROUND01_L(KEY_BASE +  4, T0, T1, I0) \
+	AES_EROUND23_L(KEY_BASE +  6, T0, T1, I1) \
+	AES_EROUND01_L(KEY_BASE +  4, T2, T3, I2) \
+	AES_EROUND23_L(KEY_BASE +  6, T2, T3, I3)
+
+	/* 10 rounds */
+#define ENCRYPT_128(KEY_BASE, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE +  0, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE +  8, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 16, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 24, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS_LAST(KEY_BASE + 32, I0, I1, T0, T1)
+
+#define ENCRYPT_128_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE +  0, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE +  8, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE + 16, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE + 24, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_LAST_2(KEY_BASE + 32, I0, I1, I2, I3, T0, T1, T2, T3)
+
+	/* 12 rounds */
+#define ENCRYPT_192(KEY_BASE, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE +  0, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE +  8, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 16, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 24, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 32, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS_LAST(KEY_BASE + 40, I0, I1, T0, T1)
+
+#define ENCRYPT_192_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE +  0, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE +  8, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE + 16, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE + 24, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE + 32, I0, I1, I2, I3, T0, T1, T2, T3) \
+	ENCRYPT_TWO_ROUNDS_LAST_2(KEY_BASE + 40, I0, I1, I2, I3, T0, T1, T2, T3)
+
+	/* 14 rounds */
+#define ENCRYPT_256(KEY_BASE, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE +  0, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE +  8, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 16, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 24, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 32, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS(KEY_BASE + 40, I0, I1, T0, T1) \
+	ENCRYPT_TWO_ROUNDS_LAST(KEY_BASE + 48, I0, I1, T0, T1)
+
+#define ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE, I0, I1, I2, I3, TMP_BASE) \
+	ENCRYPT_TWO_ROUNDS_2(KEY_BASE, I0, I1, I2, I3, \
+			     TMP_BASE + 0, TMP_BASE + 2, TMP_BASE + 4, TMP_BASE + 6)
+
+#define ENCRYPT_256_2(KEY_BASE, I0, I1, I2, I3) \
+	ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE +  0, I0, I1, I2, I3, KEY_BASE + 48) \
+	ldd	[%o0 + 0xd0], %f56; \
+	ldd	[%o0 + 0xd8], %f58; \
+	ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE +  8, I0, I1, I2, I3, KEY_BASE +  0) \
+	ldd	[%o0 + 0xe0], %f60; \
+	ldd	[%o0 + 0xe8], %f62; \
+	ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE + 16, I0, I1, I2, I3, KEY_BASE +  0) \
+	ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE + 24, I0, I1, I2, I3, KEY_BASE +  0) \
+	ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE + 32, I0, I1, I2, I3, KEY_BASE +  0) \
+	ENCRYPT_256_TWO_ROUNDS_2(KEY_BASE + 40, I0, I1, I2, I3, KEY_BASE +  0) \
+	AES_EROUND01(KEY_BASE +  48, I0, I1, KEY_BASE + 0) \
+	AES_EROUND23(KEY_BASE +  50, I0, I1, KEY_BASE + 2) \
+	AES_EROUND01(KEY_BASE +  48, I2, I3, KEY_BASE + 4) \
+	AES_EROUND23(KEY_BASE +  50, I2, I3, KEY_BASE + 6) \
+	AES_EROUND01_L(KEY_BASE +  52, KEY_BASE + 0, KEY_BASE + 2, I0) \
+	AES_EROUND23_L(KEY_BASE +  54, KEY_BASE + 0, KEY_BASE + 2, I1) \
+	ldd	[%o0 + 0x10], %f8; \
+	ldd	[%o0 + 0x18], %f10; \
+	AES_EROUND01_L(KEY_BASE +  52, KEY_BASE + 4, KEY_BASE + 6, I2) \
+	AES_EROUND23_L(KEY_BASE +  54, KEY_BASE + 4, KEY_BASE + 6, I3) \
+	ldd	[%o0 + 0x20], %f12; \
+	ldd	[%o0 + 0x28], %f14;
+
+#define DECRYPT_TWO_ROUNDS(KEY_BASE, I0, I1, T0, T1) \
+	AES_DROUND23(KEY_BASE +  0, I0, I1, T1) \
+	AES_DROUND01(KEY_BASE +  2, I0, I1, T0) \
+	AES_DROUND23(KEY_BASE +  4, T0, T1, I1) \
+	AES_DROUND01(KEY_BASE +  6, T0, T1, I0)
+
+#define DECRYPT_TWO_ROUNDS_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	AES_DROUND23(KEY_BASE +  0, I0, I1, T1) \
+	AES_DROUND01(KEY_BASE +  2, I0, I1, T0) \
+	AES_DROUND23(KEY_BASE +  0, I2, I3, T3) \
+	AES_DROUND01(KEY_BASE +  2, I2, I3, T2) \
+	AES_DROUND23(KEY_BASE +  4, T0, T1, I1) \
+	AES_DROUND01(KEY_BASE +  6, T0, T1, I0) \
+	AES_DROUND23(KEY_BASE +  4, T2, T3, I3) \
+	AES_DROUND01(KEY_BASE +  6, T2, T3, I2)
+
+#define DECRYPT_TWO_ROUNDS_LAST(KEY_BASE, I0, I1, T0, T1) \
+	AES_DROUND23(KEY_BASE +  0, I0, I1, T1) \
+	AES_DROUND01(KEY_BASE +  2, I0, I1, T0) \
+	AES_DROUND23_L(KEY_BASE +  4, T0, T1, I1) \
+	AES_DROUND01_L(KEY_BASE +  6, T0, T1, I0)
+
+#define DECRYPT_TWO_ROUNDS_LAST_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	AES_DROUND23(KEY_BASE +  0, I0, I1, T1) \
+	AES_DROUND01(KEY_BASE +  2, I0, I1, T0) \
+	AES_DROUND23(KEY_BASE +  0, I2, I3, T3) \
+	AES_DROUND01(KEY_BASE +  2, I2, I3, T2) \
+	AES_DROUND23_L(KEY_BASE +  4, T0, T1, I1) \
+	AES_DROUND01_L(KEY_BASE +  6, T0, T1, I0) \
+	AES_DROUND23_L(KEY_BASE +  4, T2, T3, I3) \
+	AES_DROUND01_L(KEY_BASE +  6, T2, T3, I2)
+
+	/* 10 rounds */
+#define DECRYPT_128(KEY_BASE, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE +  0, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE +  8, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 16, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 24, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS_LAST(KEY_BASE + 32, I0, I1, T0, T1)
+
+#define DECRYPT_128_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE +  0, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE +  8, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE + 16, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE + 24, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_LAST_2(KEY_BASE + 32, I0, I1, I2, I3, T0, T1, T2, T3)
+
+	/* 12 rounds */
+#define DECRYPT_192(KEY_BASE, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE +  0, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE +  8, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 16, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 24, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 32, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS_LAST(KEY_BASE + 40, I0, I1, T0, T1)
+
+#define DECRYPT_192_2(KEY_BASE, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE +  0, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE +  8, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE + 16, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE + 24, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE + 32, I0, I1, I2, I3, T0, T1, T2, T3) \
+	DECRYPT_TWO_ROUNDS_LAST_2(KEY_BASE + 40, I0, I1, I2, I3, T0, T1, T2, T3)
+
+	/* 14 rounds */
+#define DECRYPT_256(KEY_BASE, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE +  0, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE +  8, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 16, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 24, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 32, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS(KEY_BASE + 40, I0, I1, T0, T1) \
+	DECRYPT_TWO_ROUNDS_LAST(KEY_BASE + 48, I0, I1, T0, T1)
+
+#define DECRYPT_256_TWO_ROUNDS_2(KEY_BASE, I0, I1, I2, I3, TMP_BASE) \
+	DECRYPT_TWO_ROUNDS_2(KEY_BASE, I0, I1, I2, I3, \
+			     TMP_BASE + 0, TMP_BASE + 2, TMP_BASE + 4, TMP_BASE + 6)
+
+#define DECRYPT_256_2(KEY_BASE, I0, I1, I2, I3) \
+	DECRYPT_256_TWO_ROUNDS_2(KEY_BASE +  0, I0, I1, I2, I3, KEY_BASE + 48) \
+	ldd	[%o0 + 0x18], %f56; \
+	ldd	[%o0 + 0x10], %f58; \
+	DECRYPT_256_TWO_ROUNDS_2(KEY_BASE +  8, I0, I1, I2, I3, KEY_BASE +  0) \
+	ldd	[%o0 + 0x08], %f60; \
+	ldd	[%o0 + 0x00], %f62; \
+	DECRYPT_256_TWO_ROUNDS_2(KEY_BASE + 16, I0, I1, I2, I3, KEY_BASE +  0) \
+	DECRYPT_256_TWO_ROUNDS_2(KEY_BASE + 24, I0, I1, I2, I3, KEY_BASE +  0) \
+	DECRYPT_256_TWO_ROUNDS_2(KEY_BASE + 32, I0, I1, I2, I3, KEY_BASE +  0) \
+	DECRYPT_256_TWO_ROUNDS_2(KEY_BASE + 40, I0, I1, I2, I3, KEY_BASE +  0) \
+	AES_DROUND23(KEY_BASE +  48, I0, I1, KEY_BASE + 2) \
+	AES_DROUND01(KEY_BASE +  50, I0, I1, KEY_BASE + 0) \
+	AES_DROUND23(KEY_BASE +  48, I2, I3, KEY_BASE + 6) \
+	AES_DROUND01(KEY_BASE +  50, I2, I3, KEY_BASE + 4) \
+	AES_DROUND23_L(KEY_BASE +  52, KEY_BASE + 0, KEY_BASE + 2, I1) \
+	AES_DROUND01_L(KEY_BASE +  54, KEY_BASE + 0, KEY_BASE + 2, I0) \
+	ldd	[%o0 + 0xd8], %f8; \
+	ldd	[%o0 + 0xd0], %f10; \
+	AES_DROUND23_L(KEY_BASE +  52, KEY_BASE + 4, KEY_BASE + 6, I3) \
+	AES_DROUND01_L(KEY_BASE +  54, KEY_BASE + 4, KEY_BASE + 6, I2) \
+	ldd	[%o0 + 0xc8], %f12; \
+	ldd	[%o0 + 0xc0], %f14;
+
+	.align	32
+ENTRY(aes_sparc64_key_expand)
+	/* %o0=input_key, %o1=output_key, %o2=key_len */
+	VISEntry
+	ld	[%o0 + 0x00], %f0
+	ld	[%o0 + 0x04], %f1
+	ld	[%o0 + 0x08], %f2
+	ld	[%o0 + 0x0c], %f3
+
+	std	%f0, [%o1 + 0x00]
+	std	%f2, [%o1 + 0x08]
+	add	%o1, 0x10, %o1
+
+	cmp	%o2, 24
+	bl	2f
+	 nop
+
+	be	1f
+	 nop
+
+	/* 256-bit key expansion */
+	ld	[%o0 + 0x10], %f4
+	ld	[%o0 + 0x14], %f5
+	ld	[%o0 + 0x18], %f6
+	ld	[%o0 + 0x1c], %f7
+
+	std	%f4, [%o1 + 0x00]
+	std	%f6, [%o1 + 0x08]
+	add	%o1, 0x10, %o1
+
+	AES_KEXPAND1(0, 6, 0x0, 8)
+	AES_KEXPAND2(2, 8, 10)
+	AES_KEXPAND0(4, 10, 12)
+	AES_KEXPAND2(6, 12, 14)
+	AES_KEXPAND1(8, 14, 0x1, 16)
+	AES_KEXPAND2(10, 16, 18)
+	AES_KEXPAND0(12, 18, 20)
+	AES_KEXPAND2(14, 20, 22)
+	AES_KEXPAND1(16, 22, 0x2, 24)
+	AES_KEXPAND2(18, 24, 26)
+	AES_KEXPAND0(20, 26, 28)
+	AES_KEXPAND2(22, 28, 30)
+	AES_KEXPAND1(24, 30, 0x3, 32)
+	AES_KEXPAND2(26, 32, 34)
+	AES_KEXPAND0(28, 34, 36)
+	AES_KEXPAND2(30, 36, 38)
+	AES_KEXPAND1(32, 38, 0x4, 40)
+	AES_KEXPAND2(34, 40, 42)
+	AES_KEXPAND0(36, 42, 44)
+	AES_KEXPAND2(38, 44, 46)
+	AES_KEXPAND1(40, 46, 0x5, 48)
+	AES_KEXPAND2(42, 48, 50)
+	AES_KEXPAND0(44, 50, 52)
+	AES_KEXPAND2(46, 52, 54)
+	AES_KEXPAND1(48, 54, 0x6, 56)
+	AES_KEXPAND2(50, 56, 58)
+
+	std	%f8, [%o1 + 0x00]
+	std	%f10, [%o1 + 0x08]
+	std	%f12, [%o1 + 0x10]
+	std	%f14, [%o1 + 0x18]
+	std	%f16, [%o1 + 0x20]
+	std	%f18, [%o1 + 0x28]
+	std	%f20, [%o1 + 0x30]
+	std	%f22, [%o1 + 0x38]
+	std	%f24, [%o1 + 0x40]
+	std	%f26, [%o1 + 0x48]
+	std	%f28, [%o1 + 0x50]
+	std	%f30, [%o1 + 0x58]
+	std	%f32, [%o1 + 0x60]
+	std	%f34, [%o1 + 0x68]
+	std	%f36, [%o1 + 0x70]
+	std	%f38, [%o1 + 0x78]
+	std	%f40, [%o1 + 0x80]
+	std	%f42, [%o1 + 0x88]
+	std	%f44, [%o1 + 0x90]
+	std	%f46, [%o1 + 0x98]
+	std	%f48, [%o1 + 0xa0]
+	std	%f50, [%o1 + 0xa8]
+	std	%f52, [%o1 + 0xb0]
+	std	%f54, [%o1 + 0xb8]
+	std	%f56, [%o1 + 0xc0]
+	ba,pt	%xcc, 80f
+	 std	%f58, [%o1 + 0xc8]
+
+1:	
+	/* 192-bit key expansion */
+	ld	[%o0 + 0x10], %f4
+	ld	[%o0 + 0x14], %f5
+
+	std	%f4, [%o1 + 0x00]
+	add	%o1, 0x08, %o1
+
+	AES_KEXPAND1(0, 4, 0x0, 6)
+	AES_KEXPAND2(2, 6, 8)
+	AES_KEXPAND2(4, 8, 10)
+	AES_KEXPAND1(6, 10, 0x1, 12)
+	AES_KEXPAND2(8, 12, 14)
+	AES_KEXPAND2(10, 14, 16)
+	AES_KEXPAND1(12, 16, 0x2, 18)
+	AES_KEXPAND2(14, 18, 20)
+	AES_KEXPAND2(16, 20, 22)
+	AES_KEXPAND1(18, 22, 0x3, 24)
+	AES_KEXPAND2(20, 24, 26)
+	AES_KEXPAND2(22, 26, 28)
+	AES_KEXPAND1(24, 28, 0x4, 30)
+	AES_KEXPAND2(26, 30, 32)
+	AES_KEXPAND2(28, 32, 34)
+	AES_KEXPAND1(30, 34, 0x5, 36)
+	AES_KEXPAND2(32, 36, 38)
+	AES_KEXPAND2(34, 38, 40)
+	AES_KEXPAND1(36, 40, 0x6, 42)
+	AES_KEXPAND2(38, 42, 44)
+	AES_KEXPAND2(40, 44, 46)
+	AES_KEXPAND1(42, 46, 0x7, 48)
+	AES_KEXPAND2(44, 48, 50)
+
+	std	%f6, [%o1 + 0x00]
+	std	%f8, [%o1 + 0x08]
+	std	%f10, [%o1 + 0x10]
+	std	%f12, [%o1 + 0x18]
+	std	%f14, [%o1 + 0x20]
+	std	%f16, [%o1 + 0x28]
+	std	%f18, [%o1 + 0x30]
+	std	%f20, [%o1 + 0x38]
+	std	%f22, [%o1 + 0x40]
+	std	%f24, [%o1 + 0x48]
+	std	%f26, [%o1 + 0x50]
+	std	%f28, [%o1 + 0x58]
+	std	%f30, [%o1 + 0x60]
+	std	%f32, [%o1 + 0x68]
+	std	%f34, [%o1 + 0x70]
+	std	%f36, [%o1 + 0x78]
+	std	%f38, [%o1 + 0x80]
+	std	%f40, [%o1 + 0x88]
+	std	%f42, [%o1 + 0x90]
+	std	%f44, [%o1 + 0x98]
+	std	%f46, [%o1 + 0xa0]
+	std	%f48, [%o1 + 0xa8]
+	ba,pt	%xcc, 80f
+	 std	%f50, [%o1 + 0xb0]
+
+2:
+	/* 128-bit key expansion */
+	AES_KEXPAND1(0, 2, 0x0, 4)
+	AES_KEXPAND2(2, 4, 6)
+	AES_KEXPAND1(4, 6, 0x1, 8)
+	AES_KEXPAND2(6, 8, 10)
+	AES_KEXPAND1(8, 10, 0x2, 12)
+	AES_KEXPAND2(10, 12, 14)
+	AES_KEXPAND1(12, 14, 0x3, 16)
+	AES_KEXPAND2(14, 16, 18)
+	AES_KEXPAND1(16, 18, 0x4, 20)
+	AES_KEXPAND2(18, 20, 22)
+	AES_KEXPAND1(20, 22, 0x5, 24)
+	AES_KEXPAND2(22, 24, 26)
+	AES_KEXPAND1(24, 26, 0x6, 28)
+	AES_KEXPAND2(26, 28, 30)
+	AES_KEXPAND1(28, 30, 0x7, 32)
+	AES_KEXPAND2(30, 32, 34)
+	AES_KEXPAND1(32, 34, 0x8, 36)
+	AES_KEXPAND2(34, 36, 38)
+	AES_KEXPAND1(36, 38, 0x9, 40)
+	AES_KEXPAND2(38, 40, 42)
+
+	std	%f4, [%o1 + 0x00]
+	std	%f6, [%o1 + 0x08]
+	std	%f8, [%o1 + 0x10]
+	std	%f10, [%o1 + 0x18]
+	std	%f12, [%o1 + 0x20]
+	std	%f14, [%o1 + 0x28]
+	std	%f16, [%o1 + 0x30]
+	std	%f18, [%o1 + 0x38]
+	std	%f20, [%o1 + 0x40]
+	std	%f22, [%o1 + 0x48]
+	std	%f24, [%o1 + 0x50]
+	std	%f26, [%o1 + 0x58]
+	std	%f28, [%o1 + 0x60]
+	std	%f30, [%o1 + 0x68]
+	std	%f32, [%o1 + 0x70]
+	std	%f34, [%o1 + 0x78]
+	std	%f36, [%o1 + 0x80]
+	std	%f38, [%o1 + 0x88]
+	std	%f40, [%o1 + 0x90]
+	std	%f42, [%o1 + 0x98]
+80:
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_key_expand)
+
+	.align		32
+ENTRY(aes_sparc64_encrypt_128)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ld		[%o1 + 0x00], %f4
+	ld		[%o1 + 0x04], %f5
+	ld		[%o1 + 0x08], %f6
+	ld		[%o1 + 0x0c], %f7
+	ldd		[%o0 + 0x00], %f8
+	ldd		[%o0 + 0x08], %f10
+	ldd		[%o0 + 0x10], %f12
+	ldd		[%o0 + 0x18], %f14
+	ldd		[%o0 + 0x20], %f16
+	ldd		[%o0 + 0x28], %f18
+	ldd		[%o0 + 0x30], %f20
+	ldd		[%o0 + 0x38], %f22
+	ldd		[%o0 + 0x40], %f24
+	ldd		[%o0 + 0x48], %f26
+	ldd		[%o0 + 0x50], %f28
+	ldd		[%o0 + 0x58], %f30
+	ldd		[%o0 + 0x60], %f32
+	ldd		[%o0 + 0x68], %f34
+	ldd		[%o0 + 0x70], %f36
+	ldd		[%o0 + 0x78], %f38
+	ldd		[%o0 + 0x80], %f40
+	ldd		[%o0 + 0x88], %f42
+	ldd		[%o0 + 0x90], %f44
+	ldd		[%o0 + 0x98], %f46
+	ldd		[%o0 + 0xa0], %f48
+	ldd		[%o0 + 0xa8], %f50
+	fxor		%f8, %f4, %f4
+	fxor		%f10, %f6, %f6
+	ENCRYPT_128(12, 4, 6, 0, 2)
+	st		%f4, [%o2 + 0x00]
+	st		%f5, [%o2 + 0x04]
+	st		%f6, [%o2 + 0x08]
+	st		%f7, [%o2 + 0x0c]
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_encrypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_encrypt_192)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ld		[%o1 + 0x00], %f4
+	ld		[%o1 + 0x04], %f5
+	ld		[%o1 + 0x08], %f6
+	ld		[%o1 + 0x0c], %f7
+
+	ldd		[%o0 + 0x00], %f8
+	ldd		[%o0 + 0x08], %f10
+
+	fxor		%f8, %f4, %f4
+	fxor		%f10, %f6, %f6
+
+	ldd		[%o0 + 0x10], %f8
+	ldd		[%o0 + 0x18], %f10
+	ldd		[%o0 + 0x20], %f12
+	ldd		[%o0 + 0x28], %f14
+	add		%o0, 0x20, %o0
+
+	ENCRYPT_TWO_ROUNDS(8, 4, 6, 0, 2)
+
+	ldd		[%o0 + 0x10], %f12
+	ldd		[%o0 + 0x18], %f14
+	ldd		[%o0 + 0x20], %f16
+	ldd		[%o0 + 0x28], %f18
+	ldd		[%o0 + 0x30], %f20
+	ldd		[%o0 + 0x38], %f22
+	ldd		[%o0 + 0x40], %f24
+	ldd		[%o0 + 0x48], %f26
+	ldd		[%o0 + 0x50], %f28
+	ldd		[%o0 + 0x58], %f30
+	ldd		[%o0 + 0x60], %f32
+	ldd		[%o0 + 0x68], %f34
+	ldd		[%o0 + 0x70], %f36
+	ldd		[%o0 + 0x78], %f38
+	ldd		[%o0 + 0x80], %f40
+	ldd		[%o0 + 0x88], %f42
+	ldd		[%o0 + 0x90], %f44
+	ldd		[%o0 + 0x98], %f46
+	ldd		[%o0 + 0xa0], %f48
+	ldd		[%o0 + 0xa8], %f50
+
+
+	ENCRYPT_128(12, 4, 6, 0, 2)
+
+	st		%f4, [%o2 + 0x00]
+	st		%f5, [%o2 + 0x04]
+	st		%f6, [%o2 + 0x08]
+	st		%f7, [%o2 + 0x0c]
+
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_encrypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_encrypt_256)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ld		[%o1 + 0x00], %f4
+	ld		[%o1 + 0x04], %f5
+	ld		[%o1 + 0x08], %f6
+	ld		[%o1 + 0x0c], %f7
+
+	ldd		[%o0 + 0x00], %f8
+	ldd		[%o0 + 0x08], %f10
+
+	fxor		%f8, %f4, %f4
+	fxor		%f10, %f6, %f6
+
+	ldd		[%o0 + 0x10], %f8
+
+	ldd		[%o0 + 0x18], %f10
+	ldd		[%o0 + 0x20], %f12
+	ldd		[%o0 + 0x28], %f14
+	add		%o0, 0x20, %o0
+
+	ENCRYPT_TWO_ROUNDS(8, 4, 6, 0, 2)
+
+	ldd		[%o0 + 0x10], %f8
+
+	ldd		[%o0 + 0x18], %f10
+	ldd		[%o0 + 0x20], %f12
+	ldd		[%o0 + 0x28], %f14
+	add		%o0, 0x20, %o0
+
+	ENCRYPT_TWO_ROUNDS(8, 4, 6, 0, 2)
+
+	ldd		[%o0 + 0x10], %f12
+	ldd		[%o0 + 0x18], %f14
+	ldd		[%o0 + 0x20], %f16
+	ldd		[%o0 + 0x28], %f18
+	ldd		[%o0 + 0x30], %f20
+	ldd		[%o0 + 0x38], %f22
+	ldd		[%o0 + 0x40], %f24
+	ldd		[%o0 + 0x48], %f26
+	ldd		[%o0 + 0x50], %f28
+	ldd		[%o0 + 0x58], %f30
+	ldd		[%o0 + 0x60], %f32
+	ldd		[%o0 + 0x68], %f34
+	ldd		[%o0 + 0x70], %f36
+	ldd		[%o0 + 0x78], %f38
+	ldd		[%o0 + 0x80], %f40
+	ldd		[%o0 + 0x88], %f42
+	ldd		[%o0 + 0x90], %f44
+	ldd		[%o0 + 0x98], %f46
+	ldd		[%o0 + 0xa0], %f48
+	ldd		[%o0 + 0xa8], %f50
+
+	ENCRYPT_128(12, 4, 6, 0, 2)
+
+	st		%f4, [%o2 + 0x00]
+	st		%f5, [%o2 + 0x04]
+	st		%f6, [%o2 + 0x08]
+	st		%f7, [%o2 + 0x0c]
+
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_encrypt_256)
+
+	.align		32
+ENTRY(aes_sparc64_decrypt_128)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ld		[%o1 + 0x00], %f4
+	ld		[%o1 + 0x04], %f5
+	ld		[%o1 + 0x08], %f6
+	ld		[%o1 + 0x0c], %f7
+	ldd		[%o0 + 0xa0], %f8
+	ldd		[%o0 + 0xa8], %f10
+	ldd		[%o0 + 0x98], %f12
+	ldd		[%o0 + 0x90], %f14
+	ldd		[%o0 + 0x88], %f16
+	ldd		[%o0 + 0x80], %f18
+	ldd		[%o0 + 0x78], %f20
+	ldd		[%o0 + 0x70], %f22
+	ldd		[%o0 + 0x68], %f24
+	ldd		[%o0 + 0x60], %f26
+	ldd		[%o0 + 0x58], %f28
+	ldd		[%o0 + 0x50], %f30
+	ldd		[%o0 + 0x48], %f32
+	ldd		[%o0 + 0x40], %f34
+	ldd		[%o0 + 0x38], %f36
+	ldd		[%o0 + 0x30], %f38
+	ldd		[%o0 + 0x28], %f40
+	ldd		[%o0 + 0x20], %f42
+	ldd		[%o0 + 0x18], %f44
+	ldd		[%o0 + 0x10], %f46
+	ldd		[%o0 + 0x08], %f48
+	ldd		[%o0 + 0x00], %f50
+	fxor		%f8, %f4, %f4
+	fxor		%f10, %f6, %f6
+	DECRYPT_128(12, 4, 6, 0, 2)
+	st		%f4, [%o2 + 0x00]
+	st		%f5, [%o2 + 0x04]
+	st		%f6, [%o2 + 0x08]
+	st		%f7, [%o2 + 0x0c]
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_decrypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_decrypt_192)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ld		[%o1 + 0x00], %f4
+	ld		[%o1 + 0x04], %f5
+	ld		[%o1 + 0x08], %f6
+	ld		[%o1 + 0x0c], %f7
+	ldd		[%o0 + 0xc0], %f8
+	ldd		[%o0 + 0xc8], %f10
+	ldd		[%o0 + 0xb8], %f12
+	ldd		[%o0 + 0xb0], %f14
+	ldd		[%o0 + 0xa8], %f16
+	ldd		[%o0 + 0xa0], %f18
+	fxor		%f8, %f4, %f4
+	fxor		%f10, %f6, %f6
+	ldd		[%o0 + 0x98], %f20
+	ldd		[%o0 + 0x90], %f22
+	ldd		[%o0 + 0x88], %f24
+	ldd		[%o0 + 0x80], %f26
+	DECRYPT_TWO_ROUNDS(12, 4, 6, 0, 2)
+	ldd		[%o0 + 0x78], %f28
+	ldd		[%o0 + 0x70], %f30
+	ldd		[%o0 + 0x68], %f32
+	ldd		[%o0 + 0x60], %f34
+	ldd		[%o0 + 0x58], %f36
+	ldd		[%o0 + 0x50], %f38
+	ldd		[%o0 + 0x48], %f40
+	ldd		[%o0 + 0x40], %f42
+	ldd		[%o0 + 0x38], %f44
+	ldd		[%o0 + 0x30], %f46
+	ldd		[%o0 + 0x28], %f48
+	ldd		[%o0 + 0x20], %f50
+	ldd		[%o0 + 0x18], %f52
+	ldd		[%o0 + 0x10], %f54
+	ldd		[%o0 + 0x08], %f56
+	ldd		[%o0 + 0x00], %f58
+	DECRYPT_128(20, 4, 6, 0, 2)
+	st		%f4, [%o2 + 0x00]
+	st		%f5, [%o2 + 0x04]
+	st		%f6, [%o2 + 0x08]
+	st		%f7, [%o2 + 0x0c]
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_decrypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_decrypt_256)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ld		[%o1 + 0x00], %f4
+	ld		[%o1 + 0x04], %f5
+	ld		[%o1 + 0x08], %f6
+	ld		[%o1 + 0x0c], %f7
+	ldd		[%o0 + 0xe0], %f8
+	ldd		[%o0 + 0xe8], %f10
+	ldd		[%o0 + 0xd8], %f12
+	ldd		[%o0 + 0xd0], %f14
+	ldd		[%o0 + 0xc8], %f16
+	fxor		%f8, %f4, %f4
+	ldd		[%o0 + 0xc0], %f18
+	fxor		%f10, %f6, %f6
+	ldd		[%o0 + 0xb8], %f20
+	AES_DROUND23(12, 4, 6, 2)
+	ldd		[%o0 + 0xb0], %f22
+	AES_DROUND01(14, 4, 6, 0)
+	ldd		[%o0 + 0xa8], %f24
+	AES_DROUND23(16, 0, 2, 6)
+	ldd		[%o0 + 0xa0], %f26
+	AES_DROUND01(18, 0, 2, 4)
+	ldd		[%o0 + 0x98], %f12
+	AES_DROUND23(20, 4, 6, 2)
+	ldd		[%o0 + 0x90], %f14
+	AES_DROUND01(22, 4, 6, 0)
+	ldd		[%o0 + 0x88], %f16
+	AES_DROUND23(24, 0, 2, 6)
+	ldd		[%o0 + 0x80], %f18
+	AES_DROUND01(26, 0, 2, 4)
+	ldd		[%o0 + 0x78], %f20
+	AES_DROUND23(12, 4, 6, 2)
+	ldd		[%o0 + 0x70], %f22
+	AES_DROUND01(14, 4, 6, 0)
+	ldd		[%o0 + 0x68], %f24
+	AES_DROUND23(16, 0, 2, 6)
+	ldd		[%o0 + 0x60], %f26
+	AES_DROUND01(18, 0, 2, 4)
+	ldd		[%o0 + 0x58], %f28
+	AES_DROUND23(20, 4, 6, 2)
+	ldd		[%o0 + 0x50], %f30
+	AES_DROUND01(22, 4, 6, 0)
+	ldd		[%o0 + 0x48], %f32
+	AES_DROUND23(24, 0, 2, 6)
+	ldd		[%o0 + 0x40], %f34
+	AES_DROUND01(26, 0, 2, 4)
+	ldd		[%o0 + 0x38], %f36
+	AES_DROUND23(28, 4, 6, 2)
+	ldd		[%o0 + 0x30], %f38
+	AES_DROUND01(30, 4, 6, 0)
+	ldd		[%o0 + 0x28], %f40
+	AES_DROUND23(32, 0, 2, 6)
+	ldd		[%o0 + 0x20], %f42
+	AES_DROUND01(34, 0, 2, 4)
+	ldd		[%o0 + 0x18], %f44
+	AES_DROUND23(36, 4, 6, 2)
+	ldd		[%o0 + 0x10], %f46
+	AES_DROUND01(38, 4, 6, 0)
+	ldd		[%o0 + 0x08], %f48
+	AES_DROUND23(40, 0, 2, 6)
+	ldd		[%o0 + 0x00], %f50
+	AES_DROUND01(42, 0, 2, 4)
+	AES_DROUND23(44, 4, 6, 2)
+	AES_DROUND01(46, 4, 6, 0)
+	AES_DROUND23_L(48, 0, 2, 6)
+	AES_DROUND01_L(50, 0, 2, 4)
+	st		%f4, [%o2 + 0x00]
+	st		%f5, [%o2 + 0x04]
+	st		%f6, [%o2 + 0x08]
+	st		%f7, [%o2 + 0x0c]
+	retl
+	 VISExit
+ENDPROC(aes_sparc64_decrypt_256)
+
+	.align		32
+ENTRY(aes_sparc64_load_encrypt_keys_128)
+	/* %o0=key */
+	VISEntry
+	ldd		[%o0 + 0x10], %f8
+	ldd		[%o0 + 0x18], %f10
+	ldd		[%o0 + 0x20], %f12
+	ldd		[%o0 + 0x28], %f14
+	ldd		[%o0 + 0x30], %f16
+	ldd		[%o0 + 0x38], %f18
+	ldd		[%o0 + 0x40], %f20
+	ldd		[%o0 + 0x48], %f22
+	ldd		[%o0 + 0x50], %f24
+	ldd		[%o0 + 0x58], %f26
+	ldd		[%o0 + 0x60], %f28
+	ldd		[%o0 + 0x68], %f30
+	ldd		[%o0 + 0x70], %f32
+	ldd		[%o0 + 0x78], %f34
+	ldd		[%o0 + 0x80], %f36
+	ldd		[%o0 + 0x88], %f38
+	ldd		[%o0 + 0x90], %f40
+	ldd		[%o0 + 0x98], %f42
+	ldd		[%o0 + 0xa0], %f44
+	retl
+	 ldd		[%o0 + 0xa8], %f46
+ENDPROC(aes_sparc64_load_encrypt_keys_128)
+
+	.align		32
+ENTRY(aes_sparc64_load_encrypt_keys_192)
+	/* %o0=key */
+	VISEntry
+	ldd		[%o0 + 0x10], %f8
+	ldd		[%o0 + 0x18], %f10
+	ldd		[%o0 + 0x20], %f12
+	ldd		[%o0 + 0x28], %f14
+	ldd		[%o0 + 0x30], %f16
+	ldd		[%o0 + 0x38], %f18
+	ldd		[%o0 + 0x40], %f20
+	ldd		[%o0 + 0x48], %f22
+	ldd		[%o0 + 0x50], %f24
+	ldd		[%o0 + 0x58], %f26
+	ldd		[%o0 + 0x60], %f28
+	ldd		[%o0 + 0x68], %f30
+	ldd		[%o0 + 0x70], %f32
+	ldd		[%o0 + 0x78], %f34
+	ldd		[%o0 + 0x80], %f36
+	ldd		[%o0 + 0x88], %f38
+	ldd		[%o0 + 0x90], %f40
+	ldd		[%o0 + 0x98], %f42
+	ldd		[%o0 + 0xa0], %f44
+	ldd		[%o0 + 0xa8], %f46
+	ldd		[%o0 + 0xb0], %f48
+	ldd		[%o0 + 0xb8], %f50
+	ldd		[%o0 + 0xc0], %f52
+	retl
+	 ldd		[%o0 + 0xc8], %f54
+ENDPROC(aes_sparc64_load_encrypt_keys_192)
+
+	.align		32
+ENTRY(aes_sparc64_load_encrypt_keys_256)
+	/* %o0=key */
+	VISEntry
+	ldd		[%o0 + 0x10], %f8
+	ldd		[%o0 + 0x18], %f10
+	ldd		[%o0 + 0x20], %f12
+	ldd		[%o0 + 0x28], %f14
+	ldd		[%o0 + 0x30], %f16
+	ldd		[%o0 + 0x38], %f18
+	ldd		[%o0 + 0x40], %f20
+	ldd		[%o0 + 0x48], %f22
+	ldd		[%o0 + 0x50], %f24
+	ldd		[%o0 + 0x58], %f26
+	ldd		[%o0 + 0x60], %f28
+	ldd		[%o0 + 0x68], %f30
+	ldd		[%o0 + 0x70], %f32
+	ldd		[%o0 + 0x78], %f34
+	ldd		[%o0 + 0x80], %f36
+	ldd		[%o0 + 0x88], %f38
+	ldd		[%o0 + 0x90], %f40
+	ldd		[%o0 + 0x98], %f42
+	ldd		[%o0 + 0xa0], %f44
+	ldd		[%o0 + 0xa8], %f46
+	ldd		[%o0 + 0xb0], %f48
+	ldd		[%o0 + 0xb8], %f50
+	ldd		[%o0 + 0xc0], %f52
+	ldd		[%o0 + 0xc8], %f54
+	ldd		[%o0 + 0xd0], %f56
+	ldd		[%o0 + 0xd8], %f58
+	ldd		[%o0 + 0xe0], %f60
+	retl
+	 ldd		[%o0 + 0xe8], %f62
+ENDPROC(aes_sparc64_load_encrypt_keys_256)
+
+	.align		32
+ENTRY(aes_sparc64_load_decrypt_keys_128)
+	/* %o0=key */
+	VISEntry
+	ldd		[%o0 + 0x98], %f8
+	ldd		[%o0 + 0x90], %f10
+	ldd		[%o0 + 0x88], %f12
+	ldd		[%o0 + 0x80], %f14
+	ldd		[%o0 + 0x78], %f16
+	ldd		[%o0 + 0x70], %f18
+	ldd		[%o0 + 0x68], %f20
+	ldd		[%o0 + 0x60], %f22
+	ldd		[%o0 + 0x58], %f24
+	ldd		[%o0 + 0x50], %f26
+	ldd		[%o0 + 0x48], %f28
+	ldd		[%o0 + 0x40], %f30
+	ldd		[%o0 + 0x38], %f32
+	ldd		[%o0 + 0x30], %f34
+	ldd		[%o0 + 0x28], %f36
+	ldd		[%o0 + 0x20], %f38
+	ldd		[%o0 + 0x18], %f40
+	ldd		[%o0 + 0x10], %f42
+	ldd		[%o0 + 0x08], %f44
+	retl
+	 ldd		[%o0 + 0x00], %f46
+ENDPROC(aes_sparc64_load_decrypt_keys_128)
+
+	.align		32
+ENTRY(aes_sparc64_load_decrypt_keys_192)
+	/* %o0=key */
+	VISEntry
+	ldd		[%o0 + 0xb8], %f8
+	ldd		[%o0 + 0xb0], %f10
+	ldd		[%o0 + 0xa8], %f12
+	ldd		[%o0 + 0xa0], %f14
+	ldd		[%o0 + 0x98], %f16
+	ldd		[%o0 + 0x90], %f18
+	ldd		[%o0 + 0x88], %f20
+	ldd		[%o0 + 0x80], %f22
+	ldd		[%o0 + 0x78], %f24
+	ldd		[%o0 + 0x70], %f26
+	ldd		[%o0 + 0x68], %f28
+	ldd		[%o0 + 0x60], %f30
+	ldd		[%o0 + 0x58], %f32
+	ldd		[%o0 + 0x50], %f34
+	ldd		[%o0 + 0x48], %f36
+	ldd		[%o0 + 0x40], %f38
+	ldd		[%o0 + 0x38], %f40
+	ldd		[%o0 + 0x30], %f42
+	ldd		[%o0 + 0x28], %f44
+	ldd		[%o0 + 0x20], %f46
+	ldd		[%o0 + 0x18], %f48
+	ldd		[%o0 + 0x10], %f50
+	ldd		[%o0 + 0x08], %f52
+	retl
+	 ldd		[%o0 + 0x00], %f54
+ENDPROC(aes_sparc64_load_decrypt_keys_192)
+
+	.align		32
+ENTRY(aes_sparc64_load_decrypt_keys_256)
+	/* %o0=key */
+	VISEntry
+	ldd		[%o0 + 0xd8], %f8
+	ldd		[%o0 + 0xd0], %f10
+	ldd		[%o0 + 0xc8], %f12
+	ldd		[%o0 + 0xc0], %f14
+	ldd		[%o0 + 0xb8], %f16
+	ldd		[%o0 + 0xb0], %f18
+	ldd		[%o0 + 0xa8], %f20
+	ldd		[%o0 + 0xa0], %f22
+	ldd		[%o0 + 0x98], %f24
+	ldd		[%o0 + 0x90], %f26
+	ldd		[%o0 + 0x88], %f28
+	ldd		[%o0 + 0x80], %f30
+	ldd		[%o0 + 0x78], %f32
+	ldd		[%o0 + 0x70], %f34
+	ldd		[%o0 + 0x68], %f36
+	ldd		[%o0 + 0x60], %f38
+	ldd		[%o0 + 0x58], %f40
+	ldd		[%o0 + 0x50], %f42
+	ldd		[%o0 + 0x48], %f44
+	ldd		[%o0 + 0x40], %f46
+	ldd		[%o0 + 0x38], %f48
+	ldd		[%o0 + 0x30], %f50
+	ldd		[%o0 + 0x28], %f52
+	ldd		[%o0 + 0x20], %f54
+	ldd		[%o0 + 0x18], %f56
+	ldd		[%o0 + 0x10], %f58
+	ldd		[%o0 + 0x08], %f60
+	retl
+	 ldd		[%o0 + 0x00], %f62
+ENDPROC(aes_sparc64_load_decrypt_keys_256)
+
+	.align		32
+ENTRY(aes_sparc64_ecb_encrypt_128)
+	/* %o0=key, %o1=input, %o2=output, %o3=len */
+	ldx		[%o0 + 0x00], %g1
+	subcc		%o3, 0x10, %o3
+	be		10f
+	 ldx		[%o0 + 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	xor		%g1, %o4, %g3
+	xor		%g2, %o5, %g7
+	MOVXTOD_G3_F60
+	MOVXTOD_G7_F62
+	ENCRYPT_128_2(8, 4, 6, 60, 62, 0, 2, 56, 58)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	sub		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	ENCRYPT_128(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	retl
+	 nop
+ENDPROC(aes_sparc64_ecb_encrypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_ecb_encrypt_192)
+	/* %o0=key, %o1=input, %o2=output, %o3=len */
+	ldx		[%o0 + 0x00], %g1
+	subcc		%o3, 0x10, %o3
+	be		10f
+	 ldx		[%o0 + 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	xor		%g1, %o4, %g3
+	xor		%g2, %o5, %g7
+	MOVXTOD_G3_F60
+	MOVXTOD_G7_F62
+	ENCRYPT_192_2(8, 4, 6, 60, 62, 0, 2, 56, 58)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	sub		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	ENCRYPT_192(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	retl
+	 nop
+ENDPROC(aes_sparc64_ecb_encrypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_ecb_encrypt_256)
+	/* %o0=key, %o1=input, %o2=output, %o3=len */
+	ldx		[%o0 + 0x00], %g1
+	subcc		%o3, 0x10, %o3
+	be		10f
+	 ldx		[%o0 + 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	xor		%g1, %o4, %g3
+	xor		%g2, %o5, %g7
+	MOVXTOD_G3_F0
+	MOVXTOD_G7_F2
+	ENCRYPT_256_2(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	std		%f0, [%o2 + 0x10]
+	std		%f2, [%o2 + 0x18]
+	sub		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	ENCRYPT_256(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	retl
+	 nop
+ENDPROC(aes_sparc64_ecb_encrypt_256)
+
+	.align		32
+ENTRY(aes_sparc64_ecb_decrypt_128)
+	/* %o0=&key[key_len], %o1=input, %o2=output, %o3=len */
+	ldx		[%o0 - 0x10], %g1
+	subcc		%o3, 0x10, %o3
+	be		10f
+	 ldx		[%o0 - 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	xor		%g1, %o4, %g3
+	xor		%g2, %o5, %g7
+	MOVXTOD_G3_F60
+	MOVXTOD_G7_F62
+	DECRYPT_128_2(8, 4, 6, 60, 62, 0, 2, 56, 58)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	sub		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz,pt		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	DECRYPT_128(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	retl
+	 nop
+ENDPROC(aes_sparc64_ecb_decrypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_ecb_decrypt_192)
+	/* %o0=&key[key_len], %o1=input, %o2=output, %o3=len */
+	ldx		[%o0 - 0x10], %g1
+	subcc		%o3, 0x10, %o3
+	be		10f
+	 ldx		[%o0 - 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	xor		%g1, %o4, %g3
+	xor		%g2, %o5, %g7
+	MOVXTOD_G3_F60
+	MOVXTOD_G7_F62
+	DECRYPT_192_2(8, 4, 6, 60, 62, 0, 2, 56, 58)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	sub		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz,pt		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	DECRYPT_192(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	retl
+	 nop
+ENDPROC(aes_sparc64_ecb_decrypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_ecb_decrypt_256)
+	/* %o0=&key[key_len], %o1=input, %o2=output, %o3=len */
+	ldx		[%o0 - 0x10], %g1
+	subcc		%o3, 0x10, %o3
+	be		10f
+	 ldx		[%o0 - 0x08], %g2
+	sub		%o0, 0xf0, %o0
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	xor		%g1, %o4, %g3
+	xor		%g2, %o5, %g7
+	MOVXTOD_G3_F0
+	MOVXTOD_G7_F2
+	DECRYPT_256_2(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	std		%f0, [%o2 + 0x10]
+	std		%f2, [%o2 + 0x18]
+	sub		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz,pt		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	DECRYPT_256(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	retl
+	 nop
+ENDPROC(aes_sparc64_ecb_decrypt_256)
+
+	.align		32
+ENTRY(aes_sparc64_cbc_encrypt_128)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldd		[%o4 + 0x00], %f4
+	ldd		[%o4 + 0x08], %f6
+	ldx		[%o0 + 0x00], %g1
+	ldx		[%o0 + 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	add		%o1, 0x10, %o1
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F0
+	MOVXTOD_G7_F2
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	ENCRYPT_128(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	subcc		%o3, 0x10, %o3
+	bne,pt		%xcc, 1b
+	 add		%o2, 0x10, %o2
+	std		%f4, [%o4 + 0x00]
+	std		%f6, [%o4 + 0x08]
+	retl
+	 nop
+ENDPROC(aes_sparc64_cbc_encrypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_cbc_encrypt_192)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldd		[%o4 + 0x00], %f4
+	ldd		[%o4 + 0x08], %f6
+	ldx		[%o0 + 0x00], %g1
+	ldx		[%o0 + 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	add		%o1, 0x10, %o1
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F0
+	MOVXTOD_G7_F2
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	ENCRYPT_192(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	subcc		%o3, 0x10, %o3
+	bne,pt		%xcc, 1b
+	 add		%o2, 0x10, %o2
+	std		%f4, [%o4 + 0x00]
+	std		%f6, [%o4 + 0x08]
+	retl
+	 nop
+ENDPROC(aes_sparc64_cbc_encrypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_cbc_encrypt_256)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldd		[%o4 + 0x00], %f4
+	ldd		[%o4 + 0x08], %f6
+	ldx		[%o0 + 0x00], %g1
+	ldx		[%o0 + 0x08], %g2
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	add		%o1, 0x10, %o1
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F0
+	MOVXTOD_G7_F2
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	ENCRYPT_256(8, 4, 6, 0, 2)
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	subcc		%o3, 0x10, %o3
+	bne,pt		%xcc, 1b
+	 add		%o2, 0x10, %o2
+	std		%f4, [%o4 + 0x00]
+	std		%f6, [%o4 + 0x08]
+	retl
+	 nop
+ENDPROC(aes_sparc64_cbc_encrypt_256)
+
+	.align		32
+ENTRY(aes_sparc64_cbc_decrypt_128)
+	/* %o0=&key[key_len], %o1=input, %o2=output, %o3=len, %o4=iv */
+	ldx		[%o0 - 0x10], %g1
+	ldx		[%o0 - 0x08], %g2
+	ldx		[%o4 + 0x00], %o0
+	ldx		[%o4 + 0x08], %o5
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	add		%o1, 0x10, %o1
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	DECRYPT_128(8, 4, 6, 0, 2)
+	MOVXTOD_O0_F0
+	MOVXTOD_O5_F2
+	xor		%g1, %g3, %o0
+	xor		%g2, %g7, %o5
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	subcc		%o3, 0x10, %o3
+	bne,pt		%xcc, 1b
+	 add		%o2, 0x10, %o2
+	stx		%o0, [%o4 + 0x00]
+	stx		%o5, [%o4 + 0x08]
+	retl
+	 nop
+ENDPROC(aes_sparc64_cbc_decrypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_cbc_decrypt_192)
+	/* %o0=&key[key_len], %o1=input, %o2=output, %o3=len, %o4=iv */
+	ldx		[%o0 - 0x10], %g1
+	ldx		[%o0 - 0x08], %g2
+	ldx		[%o4 + 0x00], %o0
+	ldx		[%o4 + 0x08], %o5
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	add		%o1, 0x10, %o1
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	DECRYPT_192(8, 4, 6, 0, 2)
+	MOVXTOD_O0_F0
+	MOVXTOD_O5_F2
+	xor		%g1, %g3, %o0
+	xor		%g2, %g7, %o5
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	subcc		%o3, 0x10, %o3
+	bne,pt		%xcc, 1b
+	 add		%o2, 0x10, %o2
+	stx		%o0, [%o4 + 0x00]
+	stx		%o5, [%o4 + 0x08]
+	retl
+	 nop
+ENDPROC(aes_sparc64_cbc_decrypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_cbc_decrypt_256)
+	/* %o0=&key[key_len], %o1=input, %o2=output, %o3=len, %o4=iv */
+	ldx		[%o0 - 0x10], %g1
+	ldx		[%o0 - 0x08], %g2
+	ldx		[%o4 + 0x00], %o0
+	ldx		[%o4 + 0x08], %o5
+1:	ldx		[%o1 + 0x00], %g3
+	ldx		[%o1 + 0x08], %g7
+	add		%o1, 0x10, %o1
+	xor		%g1, %g3, %g3
+	xor		%g2, %g7, %g7
+	MOVXTOD_G3_F4
+	MOVXTOD_G7_F6
+	DECRYPT_256(8, 4, 6, 0, 2)
+	MOVXTOD_O0_F0
+	MOVXTOD_O5_F2
+	xor		%g1, %g3, %o0
+	xor		%g2, %g7, %o5
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+	subcc		%o3, 0x10, %o3
+	bne,pt		%xcc, 1b
+	 add		%o2, 0x10, %o2
+	stx		%o0, [%o4 + 0x00]
+	stx		%o5, [%o4 + 0x08]
+	retl
+	 nop
+ENDPROC(aes_sparc64_cbc_decrypt_256)
+
+	.align		32
+ENTRY(aes_sparc64_ctr_crypt_128)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldx		[%o4 + 0x00], %g3
+	ldx		[%o4 + 0x08], %g7
+	subcc		%o3, 0x10, %o3
+	ldx		[%o0 + 0x00], %g1
+	be		10f
+	 ldx		[%o0 + 0x08], %g2
+1:	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F0
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F2
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F4
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F6
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	ENCRYPT_128_2(8, 0, 2, 4, 6, 56, 58, 60, 62)
+	ldd		[%o1 + 0x00], %f56
+	ldd		[%o1 + 0x08], %f58
+	ldd		[%o1 + 0x10], %f60
+	ldd		[%o1 + 0x18], %f62
+	fxor		%f56, %f0, %f56
+	fxor		%f58, %f2, %f58
+	fxor		%f60, %f4, %f60
+	fxor		%f62, %f6, %f62
+	std		%f56, [%o2 + 0x00]
+	std		%f58, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	subcc		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F0
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F2
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	ENCRYPT_128(8, 0, 2, 4, 6)
+	ldd		[%o1 + 0x00], %f4
+	ldd		[%o1 + 0x08], %f6
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	stx		%g3, [%o4 + 0x00]
+	retl
+	 stx		%g7, [%o4 + 0x08]
+ENDPROC(aes_sparc64_ctr_crypt_128)
+
+	.align		32
+ENTRY(aes_sparc64_ctr_crypt_192)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldx		[%o4 + 0x00], %g3
+	ldx		[%o4 + 0x08], %g7
+	subcc		%o3, 0x10, %o3
+	ldx		[%o0 + 0x00], %g1
+	be		10f
+	 ldx		[%o0 + 0x08], %g2
+1:	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F0
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F2
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F4
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F6
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	ENCRYPT_192_2(8, 0, 2, 4, 6, 56, 58, 60, 62)
+	ldd		[%o1 + 0x00], %f56
+	ldd		[%o1 + 0x08], %f58
+	ldd		[%o1 + 0x10], %f60
+	ldd		[%o1 + 0x18], %f62
+	fxor		%f56, %f0, %f56
+	fxor		%f58, %f2, %f58
+	fxor		%f60, %f4, %f60
+	fxor		%f62, %f6, %f62
+	std		%f56, [%o2 + 0x00]
+	std		%f58, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	subcc		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+10:	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F0
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F2
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	ENCRYPT_192(8, 0, 2, 4, 6)
+	ldd		[%o1 + 0x00], %f4
+	ldd		[%o1 + 0x08], %f6
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	stx		%g3, [%o4 + 0x00]
+	retl
+	 stx		%g7, [%o4 + 0x08]
+ENDPROC(aes_sparc64_ctr_crypt_192)
+
+	.align		32
+ENTRY(aes_sparc64_ctr_crypt_256)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldx		[%o4 + 0x00], %g3
+	ldx		[%o4 + 0x08], %g7
+	subcc		%o3, 0x10, %o3
+	ldx		[%o0 + 0x00], %g1
+	be		10f
+	 ldx		[%o0 + 0x08], %g2
+1:	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F0
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F2
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F4
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F6
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	ENCRYPT_256_2(8, 0, 2, 4, 6)
+	ldd		[%o1 + 0x00], %f56
+	ldd		[%o1 + 0x08], %f58
+	ldd		[%o1 + 0x10], %f60
+	ldd		[%o1 + 0x18], %f62
+	fxor		%f56, %f0, %f56
+	fxor		%f58, %f2, %f58
+	fxor		%f60, %f4, %f60
+	fxor		%f62, %f6, %f62
+	std		%f56, [%o2 + 0x00]
+	std		%f58, [%o2 + 0x08]
+	std		%f60, [%o2 + 0x10]
+	std		%f62, [%o2 + 0x18]
+	subcc		%o3, 0x20, %o3
+	add		%o1, 0x20, %o1
+	brgz		%o3, 1b
+	 add		%o2, 0x20, %o2
+	brlz,pt		%o3, 11f
+	 nop
+	ldd		[%o0 + 0xd0], %f56
+	ldd		[%o0 + 0xd8], %f58
+	ldd		[%o0 + 0xe0], %f60
+	ldd		[%o0 + 0xe8], %f62
+10:	xor		%g1, %g3, %o5
+	MOVXTOD_O5_F0
+	xor		%g2, %g7, %o5
+	MOVXTOD_O5_F2
+	add		%g7, 1, %g7
+	add		%g3, 1, %o5
+	movrz		%g7, %o5, %g3
+	ENCRYPT_256(8, 0, 2, 4, 6)
+	ldd		[%o1 + 0x00], %f4
+	ldd		[%o1 + 0x08], %f6
+	fxor		%f4, %f0, %f4
+	fxor		%f6, %f2, %f6
+	std		%f4, [%o2 + 0x00]
+	std		%f6, [%o2 + 0x08]
+11:	stx		%g3, [%o4 + 0x00]
+	retl
+	 stx		%g7, [%o4 + 0x08]
+ENDPROC(aes_sparc64_ctr_crypt_256)
diff --git a/arch/sparc/crypto/aes_glue.c b/arch/sparc/crypto/aes_glue.c
new file mode 100644
index 000000000000..8f1c9980f637
--- /dev/null
+++ b/arch/sparc/crypto/aes_glue.c
@@ -0,0 +1,477 @@
+/* Glue code for AES encryption optimized for sparc64 crypto opcodes.
+ *
+ * This is based largely upon arch/x86/crypto/aesni-intel_glue.c
+ *
+ * Copyright (C) 2008, Intel Corp.
+ *    Author: Huang Ying <ying.huang@intel.com>
+ *
+ * Added RFC4106 AES-GCM support for 128-bit keys under the AEAD
+ * interface for 64-bit kernels.
+ *    Authors: Adrian Hoban <adrian.hoban@intel.com>
+ *             Gabriele Paoloni <gabriele.paoloni@intel.com>
+ *             Tadeusz Struk (tadeusz.struk@intel.com)
+ *             Aidan O'Mahony (aidan.o.mahony@intel.com)
+ *    Copyright (c) 2010, Intel Corporation.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <crypto/algapi.h>
+#include <crypto/aes.h>
+
+#include <asm/fpumacro.h>
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+struct aes_ops {
+	void (*encrypt)(const u64 *key, const u32 *input, u32 *output);
+	void (*decrypt)(const u64 *key, const u32 *input, u32 *output);
+	void (*load_encrypt_keys)(const u64 *key);
+	void (*load_decrypt_keys)(const u64 *key);
+	void (*ecb_encrypt)(const u64 *key, const u64 *input, u64 *output,
+			    unsigned int len);
+	void (*ecb_decrypt)(const u64 *key, const u64 *input, u64 *output,
+			    unsigned int len);
+	void (*cbc_encrypt)(const u64 *key, const u64 *input, u64 *output,
+			    unsigned int len, u64 *iv);
+	void (*cbc_decrypt)(const u64 *key, const u64 *input, u64 *output,
+			    unsigned int len, u64 *iv);
+	void (*ctr_crypt)(const u64 *key, const u64 *input, u64 *output,
+			  unsigned int len, u64 *iv);
+};
+
+struct crypto_sparc64_aes_ctx {
+	struct aes_ops *ops;
+	u64 key[AES_MAX_KEYLENGTH / sizeof(u64)];
+	u32 key_length;
+	u32 expanded_key_length;
+};
+
+extern void aes_sparc64_encrypt_128(const u64 *key, const u32 *input,
+				    u32 *output);
+extern void aes_sparc64_encrypt_192(const u64 *key, const u32 *input,
+				    u32 *output);
+extern void aes_sparc64_encrypt_256(const u64 *key, const u32 *input,
+				    u32 *output);
+
+extern void aes_sparc64_decrypt_128(const u64 *key, const u32 *input,
+				    u32 *output);
+extern void aes_sparc64_decrypt_192(const u64 *key, const u32 *input,
+				    u32 *output);
+extern void aes_sparc64_decrypt_256(const u64 *key, const u32 *input,
+				    u32 *output);
+
+extern void aes_sparc64_load_encrypt_keys_128(const u64 *key);
+extern void aes_sparc64_load_encrypt_keys_192(const u64 *key);
+extern void aes_sparc64_load_encrypt_keys_256(const u64 *key);
+
+extern void aes_sparc64_load_decrypt_keys_128(const u64 *key);
+extern void aes_sparc64_load_decrypt_keys_192(const u64 *key);
+extern void aes_sparc64_load_decrypt_keys_256(const u64 *key);
+
+extern void aes_sparc64_ecb_encrypt_128(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len);
+extern void aes_sparc64_ecb_encrypt_192(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len);
+extern void aes_sparc64_ecb_encrypt_256(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len);
+
+extern void aes_sparc64_ecb_decrypt_128(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len);
+extern void aes_sparc64_ecb_decrypt_192(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len);
+extern void aes_sparc64_ecb_decrypt_256(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len);
+
+extern void aes_sparc64_cbc_encrypt_128(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len,
+					u64 *iv);
+
+extern void aes_sparc64_cbc_encrypt_192(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len,
+					u64 *iv);
+
+extern void aes_sparc64_cbc_encrypt_256(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len,
+					u64 *iv);
+
+extern void aes_sparc64_cbc_decrypt_128(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len,
+					u64 *iv);
+
+extern void aes_sparc64_cbc_decrypt_192(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len,
+					u64 *iv);
+
+extern void aes_sparc64_cbc_decrypt_256(const u64 *key, const u64 *input,
+					u64 *output, unsigned int len,
+					u64 *iv);
+
+extern void aes_sparc64_ctr_crypt_128(const u64 *key, const u64 *input,
+				      u64 *output, unsigned int len,
+				      u64 *iv);
+extern void aes_sparc64_ctr_crypt_192(const u64 *key, const u64 *input,
+				      u64 *output, unsigned int len,
+				      u64 *iv);
+extern void aes_sparc64_ctr_crypt_256(const u64 *key, const u64 *input,
+				      u64 *output, unsigned int len,
+				      u64 *iv);
+
+struct aes_ops aes128_ops = {
+	.encrypt		= aes_sparc64_encrypt_128,
+	.decrypt		= aes_sparc64_decrypt_128,
+	.load_encrypt_keys	= aes_sparc64_load_encrypt_keys_128,
+	.load_decrypt_keys	= aes_sparc64_load_decrypt_keys_128,
+	.ecb_encrypt		= aes_sparc64_ecb_encrypt_128,
+	.ecb_decrypt		= aes_sparc64_ecb_decrypt_128,
+	.cbc_encrypt		= aes_sparc64_cbc_encrypt_128,
+	.cbc_decrypt		= aes_sparc64_cbc_decrypt_128,
+	.ctr_crypt		= aes_sparc64_ctr_crypt_128,
+};
+
+struct aes_ops aes192_ops = {
+	.encrypt		= aes_sparc64_encrypt_192,
+	.decrypt		= aes_sparc64_decrypt_192,
+	.load_encrypt_keys	= aes_sparc64_load_encrypt_keys_192,
+	.load_decrypt_keys	= aes_sparc64_load_decrypt_keys_192,
+	.ecb_encrypt		= aes_sparc64_ecb_encrypt_192,
+	.ecb_decrypt		= aes_sparc64_ecb_decrypt_192,
+	.cbc_encrypt		= aes_sparc64_cbc_encrypt_192,
+	.cbc_decrypt		= aes_sparc64_cbc_decrypt_192,
+	.ctr_crypt		= aes_sparc64_ctr_crypt_192,
+};
+
+struct aes_ops aes256_ops = {
+	.encrypt		= aes_sparc64_encrypt_256,
+	.decrypt		= aes_sparc64_decrypt_256,
+	.load_encrypt_keys	= aes_sparc64_load_encrypt_keys_256,
+	.load_decrypt_keys	= aes_sparc64_load_decrypt_keys_256,
+	.ecb_encrypt		= aes_sparc64_ecb_encrypt_256,
+	.ecb_decrypt		= aes_sparc64_ecb_decrypt_256,
+	.cbc_encrypt		= aes_sparc64_cbc_encrypt_256,
+	.cbc_decrypt		= aes_sparc64_cbc_decrypt_256,
+	.ctr_crypt		= aes_sparc64_ctr_crypt_256,
+};
+
+extern void aes_sparc64_key_expand(const u32 *in_key, u64 *output_key,
+				   unsigned int key_len);
+
+static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+		       unsigned int key_len)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+	u32 *flags = &tfm->crt_flags;
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		ctx->expanded_key_length = 0xb0;
+		ctx->ops = &aes128_ops;
+		break;
+
+	case AES_KEYSIZE_192:
+		ctx->expanded_key_length = 0xd0;
+		ctx->ops = &aes192_ops;
+		break;
+
+	case AES_KEYSIZE_256:
+		ctx->expanded_key_length = 0xf0;
+		ctx->ops = &aes256_ops;
+		break;
+
+	default:
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	aes_sparc64_key_expand((const u32 *)in_key, &ctx->key[0], key_len);
+	ctx->key_length = key_len;
+
+	return 0;
+}
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	ctx->ops->encrypt(&ctx->key[0], (const u32 *) src, (u32 *) dst);
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	ctx->ops->decrypt(&ctx->key[0], (const u32 *) src, (u32 *) dst);
+}
+
+#define AES_BLOCK_MASK	(~(AES_BLOCK_SIZE-1))
+
+static int ecb_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	ctx->ops->load_encrypt_keys(&ctx->key[0]);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & AES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			ctx->ops->ecb_encrypt(&ctx->key[0],
+					      (const u64 *)walk.src.virt.addr,
+					      (u64 *) walk.dst.virt.addr,
+					      block_len);
+		}
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	u64 *key_end;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	ctx->ops->load_decrypt_keys(&ctx->key[0]);
+	key_end = &ctx->key[ctx->expanded_key_length / sizeof(u64)];
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & AES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			ctx->ops->ecb_decrypt(key_end,
+					      (const u64 *) walk.src.virt.addr,
+					      (u64 *) walk.dst.virt.addr, block_len);
+		}
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+
+	return err;
+}
+
+static int cbc_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	ctx->ops->load_encrypt_keys(&ctx->key[0]);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & AES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			ctx->ops->cbc_encrypt(&ctx->key[0],
+					      (const u64 *)walk.src.virt.addr,
+					      (u64 *) walk.dst.virt.addr,
+					      block_len, (u64 *) walk.iv);
+		}
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	u64 *key_end;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	ctx->ops->load_decrypt_keys(&ctx->key[0]);
+	key_end = &ctx->key[ctx->expanded_key_length / sizeof(u64)];
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & AES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			ctx->ops->cbc_decrypt(key_end,
+					      (const u64 *) walk.src.virt.addr,
+					      (u64 *) walk.dst.virt.addr,
+					      block_len, (u64 *) walk.iv);
+		}
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+
+	return err;
+}
+
+static int ctr_crypt(struct blkcipher_desc *desc,
+		     struct scatterlist *dst, struct scatterlist *src,
+		     unsigned int nbytes)
+{
+	struct crypto_sparc64_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	ctx->ops->load_encrypt_keys(&ctx->key[0]);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & AES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			ctx->ops->ctr_crypt(&ctx->key[0],
+					    (const u64 *)walk.src.virt.addr,
+					    (u64 *) walk.dst.virt.addr,
+					    block_len, (u64 *) walk.iv);
+		}
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static struct crypto_alg algs[] = { {
+	.cra_name		= "aes",
+	.cra_driver_name	= "aes-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_sparc64_aes_ctx),
+	.cra_alignmask		= 3,
+	.cra_module		= THIS_MODULE,
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= AES_MIN_KEY_SIZE,
+			.cia_max_keysize	= AES_MAX_KEY_SIZE,
+			.cia_setkey		= aes_set_key,
+			.cia_encrypt		= aes_encrypt,
+			.cia_decrypt		= aes_decrypt
+		}
+	}
+}, {
+	.cra_name		= "ecb(aes)",
+	.cra_driver_name	= "ecb-aes-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_sparc64_aes_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.setkey		= aes_set_key,
+			.encrypt	= ecb_encrypt,
+			.decrypt	= ecb_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "cbc(aes)",
+	.cra_driver_name	= "cbc-aes-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_sparc64_aes_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.setkey		= aes_set_key,
+			.encrypt	= cbc_encrypt,
+			.decrypt	= cbc_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "ctr(aes)",
+	.cra_driver_name	= "ctr-aes-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_sparc64_aes_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.setkey		= aes_set_key,
+			.encrypt	= ctr_crypt,
+			.decrypt	= ctr_crypt,
+		},
+	},
+} };
+
+static bool __init sparc64_has_aes_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_AES))
+		return false;
+
+	return true;
+}
+
+static int __init aes_sparc64_mod_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(algs); i++)
+		INIT_LIST_HEAD(&algs[i].cra_list);
+
+	if (sparc64_has_aes_opcode()) {
+		pr_info("Using sparc64 aes opcodes optimized AES implementation\n");
+		return crypto_register_algs(algs, ARRAY_SIZE(algs));
+	}
+	pr_info("sparc64 aes opcodes not available.\n");
+	return -ENODEV;
+}
+
+static void __exit aes_sparc64_mod_fini(void)
+{
+	crypto_unregister_algs(algs, ARRAY_SIZE(algs));
+}
+
+module_init(aes_sparc64_mod_init);
+module_exit(aes_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AES Secure Hash Algorithm, sparc64 aes opcode accelerated");
+
+MODULE_ALIAS("aes");
diff --git a/arch/sparc/crypto/camellia_asm.S b/arch/sparc/crypto/camellia_asm.S
new file mode 100644
index 000000000000..cc39553a4e43
--- /dev/null
+++ b/arch/sparc/crypto/camellia_asm.S
@@ -0,0 +1,563 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+#define CAMELLIA_6ROUNDS(KEY_BASE, I0, I1) \
+	CAMELLIA_F(KEY_BASE +  0, I1, I0, I1) \
+	CAMELLIA_F(KEY_BASE +  2, I0, I1, I0) \
+	CAMELLIA_F(KEY_BASE +  4, I1, I0, I1) \
+	CAMELLIA_F(KEY_BASE +  6, I0, I1, I0) \
+	CAMELLIA_F(KEY_BASE +  8, I1, I0, I1) \
+	CAMELLIA_F(KEY_BASE + 10, I0, I1, I0)
+
+#define CAMELLIA_6ROUNDS_FL_FLI(KEY_BASE, I0, I1) \
+	CAMELLIA_6ROUNDS(KEY_BASE, I0, I1) \
+	CAMELLIA_FL(KEY_BASE + 12, I0, I0) \
+	CAMELLIA_FLI(KEY_BASE + 14, I1, I1)
+
+	.data
+
+	.align	8
+SIGMA:	.xword	0xA09E667F3BCC908B
+	.xword	0xB67AE8584CAA73B2
+	.xword	0xC6EF372FE94F82BE
+	.xword	0x54FF53A5F1D36F1C
+	.xword	0x10E527FADE682D1D
+	.xword	0xB05688C2B3E6C1FD
+
+	.text
+
+	.align	32
+ENTRY(camellia_sparc64_key_expand)
+	/* %o0=in_key, %o1=encrypt_key, %o2=key_len, %o3=decrypt_key */
+	VISEntry
+	ld	[%o0 + 0x00], %f0	! i0, k[0]
+	ld	[%o0 + 0x04], %f1	! i1, k[1]
+	ld	[%o0 + 0x08], %f2	! i2, k[2]
+	ld	[%o0 + 0x0c], %f3	! i3, k[3]
+	std	%f0, [%o1 + 0x00]	! k[0, 1]
+	fsrc2	%f0, %f28
+	std	%f2, [%o1 + 0x08]	! k[2, 3]
+	cmp	%o2, 16
+	be	10f
+	 fsrc2	%f2, %f30
+
+	ld	[%o0 + 0x10], %f0
+	ld	[%o0 + 0x14], %f1
+	std	%f0, [%o1 + 0x20]	! k[8, 9]
+	cmp	%o2, 24
+	fone	%f10
+	be,a	1f
+	 fxor	%f10, %f0, %f2
+	ld	[%o0 + 0x18], %f2
+	ld	[%o0 + 0x1c], %f3
+1:
+	std	%f2, [%o1 + 0x28]	! k[10, 11]
+	fxor	%f28, %f0, %f0
+	fxor	%f30, %f2, %f2
+
+10:
+	sethi	%hi(SIGMA), %g3
+	or	%g3, %lo(SIGMA), %g3
+	ldd	[%g3 + 0x00], %f16
+	ldd	[%g3 + 0x08], %f18
+	ldd	[%g3 + 0x10], %f20
+	ldd	[%g3 + 0x18], %f22
+	ldd	[%g3 + 0x20], %f24
+	ldd	[%g3 + 0x28], %f26
+	CAMELLIA_F(16, 2, 0, 2)
+	CAMELLIA_F(18, 0, 2, 0)
+	fxor	%f28, %f0, %f0
+	fxor	%f30, %f2, %f2
+	CAMELLIA_F(20, 2, 0, 2)
+	CAMELLIA_F(22, 0, 2, 0)
+
+#define ROTL128(S01, S23, TMP1, TMP2, N)	\
+	srlx	S01, (64 - N), TMP1;		\
+	sllx	S01, N, S01;			\
+	srlx	S23, (64 - N), TMP2;		\
+	sllx	S23, N, S23;			\
+	or	S01, TMP2, S01;			\
+	or	S23, TMP1, S23
+
+	cmp	%o2, 16
+	bne	1f
+	 nop
+	/* 128-bit key */
+	std	%f0, [%o1 + 0x10]	! k[ 4,  5]
+	std	%f2, [%o1 + 0x18]	! k[ 6,  7]
+	MOVDTOX_F0_O4
+	MOVDTOX_F2_O5
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x30]	! k[12, 13]
+	stx	%o5, [%o1 + 0x38]	! k[14, 15]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x40]	! k[16, 17]
+	stx	%o5, [%o1 + 0x48]	! k[18, 19]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x60]	! k[24, 25]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x70]	! k[28, 29]
+	stx	%o5, [%o1 + 0x78]	! k[30, 31]
+	ROTL128(%o4, %o5, %g2, %g3, 34)
+	stx	%o4, [%o1 + 0xa0]	! k[40, 41]
+	stx	%o5, [%o1 + 0xa8]	! k[42, 43]
+	ROTL128(%o4, %o5, %g2, %g3, 17)
+	stx	%o4, [%o1 + 0xc0]	! k[48, 49]
+	stx	%o5, [%o1 + 0xc8]	! k[50, 51]
+
+	ldx	[%o1 + 0x00], %o4	! k[ 0,  1]
+	ldx	[%o1 + 0x08], %o5	! k[ 2,  3]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x20]	! k[ 8,  9]
+	stx	%o5, [%o1 + 0x28]	! k[10, 11]
+	ROTL128(%o4, %o5, %g2, %g3, 30)
+	stx	%o4, [%o1 + 0x50]	! k[20, 21]
+	stx	%o5, [%o1 + 0x58]	! k[22, 23]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o5, [%o1 + 0x68]	! k[26, 27]
+	ROTL128(%o4, %o5, %g2, %g3, 17)
+	stx	%o4, [%o1 + 0x80]	! k[32, 33]
+	stx	%o5, [%o1 + 0x88]	! k[34, 35]
+	ROTL128(%o4, %o5, %g2, %g3, 17)
+	stx	%o4, [%o1 + 0x90]	! k[36, 37]
+	stx	%o5, [%o1 + 0x98]	! k[38, 39]
+	ROTL128(%o4, %o5, %g2, %g3, 17)
+	stx	%o4, [%o1 + 0xb0]	! k[44, 45]
+	stx	%o5, [%o1 + 0xb8]	! k[46, 47]
+
+	ba,pt	%xcc, 2f
+	 mov	(3 * 16 * 4), %o0
+
+1:
+	/* 192-bit or 256-bit key */
+	std	%f0, [%o1 + 0x30]	! k[12, 13]
+	std	%f2, [%o1 + 0x38]	! k[14, 15]
+	ldd	[%o1 + 0x20], %f4	! k[ 8,  9]
+	ldd	[%o1 + 0x28], %f6	! k[10, 11]
+	fxor	%f0, %f4, %f0
+	fxor	%f2, %f6, %f2
+	CAMELLIA_F(24, 2, 0, 2)
+	CAMELLIA_F(26, 0, 2, 0)
+	std	%f0, [%o1 + 0x10]	! k[ 4,  5]
+	std	%f2, [%o1 + 0x18]	! k[ 6,  7]
+	MOVDTOX_F0_O4
+	MOVDTOX_F2_O5
+	ROTL128(%o4, %o5, %g2, %g3, 30)
+	stx	%o4, [%o1 + 0x50]	! k[20, 21]
+	stx	%o5, [%o1 + 0x58]	! k[22, 23]
+	ROTL128(%o4, %o5, %g2, %g3, 30)
+	stx	%o4, [%o1 + 0xa0]	! k[40, 41]
+	stx	%o5, [%o1 + 0xa8]	! k[42, 43]
+	ROTL128(%o4, %o5, %g2, %g3, 51)
+	stx	%o4, [%o1 + 0x100]	! k[64, 65]
+	stx	%o5, [%o1 + 0x108]	! k[66, 67]
+	ldx	[%o1 + 0x20], %o4	! k[ 8,  9]
+	ldx	[%o1 + 0x28], %o5	! k[10, 11]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x20]	! k[ 8,  9]
+	stx	%o5, [%o1 + 0x28]	! k[10, 11]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x40]	! k[16, 17]
+	stx	%o5, [%o1 + 0x48]	! k[18, 19]
+	ROTL128(%o4, %o5, %g2, %g3, 30)
+	stx	%o4, [%o1 + 0x90]	! k[36, 37]
+	stx	%o5, [%o1 + 0x98]	! k[38, 39]
+	ROTL128(%o4, %o5, %g2, %g3, 34)
+	stx	%o4, [%o1 + 0xd0]	! k[52, 53]
+	stx	%o5, [%o1 + 0xd8]	! k[54, 55]
+	ldx	[%o1 + 0x30], %o4	! k[12, 13]
+	ldx	[%o1 + 0x38], %o5	! k[14, 15]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x30]	! k[12, 13]
+	stx	%o5, [%o1 + 0x38]	! k[14, 15]
+	ROTL128(%o4, %o5, %g2, %g3, 30)
+	stx	%o4, [%o1 + 0x70]	! k[28, 29]
+	stx	%o5, [%o1 + 0x78]	! k[30, 31]
+	srlx	%o4, 32, %g2
+	srlx	%o5, 32, %g3
+	stw	%o4, [%o1 + 0xc0]	! k[48]
+	stw	%g3, [%o1 + 0xc4]	! k[49]
+	stw	%o5, [%o1 + 0xc8]	! k[50]
+	stw	%g2, [%o1 + 0xcc]	! k[51]
+	ROTL128(%o4, %o5, %g2, %g3, 49)
+	stx	%o4, [%o1 + 0xe0]	! k[56, 57]
+	stx	%o5, [%o1 + 0xe8]	! k[58, 59]
+	ldx	[%o1 + 0x00], %o4	! k[ 0,  1]
+	ldx	[%o1 + 0x08], %o5	! k[ 2,  3]
+	ROTL128(%o4, %o5, %g2, %g3, 45)
+	stx	%o4, [%o1 + 0x60]	! k[24, 25]
+	stx	%o5, [%o1 + 0x68]	! k[26, 27]
+	ROTL128(%o4, %o5, %g2, %g3, 15)
+	stx	%o4, [%o1 + 0x80]	! k[32, 33]
+	stx	%o5, [%o1 + 0x88]	! k[34, 35]
+	ROTL128(%o4, %o5, %g2, %g3, 17)
+	stx	%o4, [%o1 + 0xb0]	! k[44, 45]
+	stx	%o5, [%o1 + 0xb8]	! k[46, 47]
+	ROTL128(%o4, %o5, %g2, %g3, 34)
+	stx	%o4, [%o1 + 0xf0]	! k[60, 61]
+	stx	%o5, [%o1 + 0xf8]	! k[62, 63]
+	mov	(4 * 16 * 4), %o0
+2:
+	add	%o1, %o0, %o1
+	ldd	[%o1 + 0x00], %f0
+	ldd	[%o1 + 0x08], %f2
+	std	%f0, [%o3 + 0x00]
+	std	%f2, [%o3 + 0x08]
+	add	%o3, 0x10, %o3
+1:
+	sub	%o1, (16 * 4), %o1
+	ldd	[%o1 + 0x38], %f0
+	ldd	[%o1 + 0x30], %f2
+	ldd	[%o1 + 0x28], %f4
+	ldd	[%o1 + 0x20], %f6
+	ldd	[%o1 + 0x18], %f8
+	ldd	[%o1 + 0x10], %f10
+	std	%f0, [%o3 + 0x00]
+	std	%f2, [%o3 + 0x08]
+	std	%f4, [%o3 + 0x10]
+	std	%f6, [%o3 + 0x18]
+	std	%f8, [%o3 + 0x20]
+	std	%f10, [%o3 + 0x28]
+
+	ldd	[%o1 + 0x08], %f0
+	ldd	[%o1 + 0x00], %f2
+	std	%f0, [%o3 + 0x30]
+	std	%f2, [%o3 + 0x38]
+	subcc	%o0, (16 * 4), %o0
+	bne,pt	%icc, 1b
+	 add	%o3, (16 * 4), %o3
+
+	std	%f2, [%o3 - 0x10]
+	std	%f0, [%o3 - 0x08]
+
+	retl
+	 VISExit
+ENDPROC(camellia_sparc64_key_expand)
+
+	.align	32
+ENTRY(camellia_sparc64_crypt)
+	/* %o0=key, %o1=input, %o2=output, %o3=key_len */
+	VISEntry
+
+	ld	[%o1 + 0x00], %f0
+	ld	[%o1 + 0x04], %f1
+	ld	[%o1 + 0x08], %f2
+	ld	[%o1 + 0x0c], %f3
+
+	ldd	[%o0 + 0x00], %f4
+	ldd	[%o0 + 0x08], %f6
+
+	cmp	%o3, 16
+	fxor	%f4, %f0, %f0
+	be	1f
+	 fxor	%f6, %f2, %f2
+
+	ldd	[%o0 + 0x10], %f8
+	ldd	[%o0 + 0x18], %f10
+	ldd	[%o0 + 0x20], %f12
+	ldd	[%o0 + 0x28], %f14
+	ldd	[%o0 + 0x30], %f16
+	ldd	[%o0 + 0x38], %f18
+	ldd	[%o0 + 0x40], %f20
+	ldd	[%o0 + 0x48], %f22
+	add	%o0, 0x40, %o0
+
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+
+1:
+	ldd	[%o0 + 0x10], %f8
+	ldd	[%o0 + 0x18], %f10
+	ldd	[%o0 + 0x20], %f12
+	ldd	[%o0 + 0x28], %f14
+	ldd	[%o0 + 0x30], %f16
+	ldd	[%o0 + 0x38], %f18
+	ldd	[%o0 + 0x40], %f20
+	ldd	[%o0 + 0x48], %f22
+	ldd	[%o0 + 0x50], %f24
+	ldd	[%o0 + 0x58], %f26
+	ldd	[%o0 + 0x60], %f28
+	ldd	[%o0 + 0x68], %f30
+	ldd	[%o0 + 0x70], %f32
+	ldd	[%o0 + 0x78], %f34
+	ldd	[%o0 + 0x80], %f36
+	ldd	[%o0 + 0x88], %f38
+	ldd	[%o0 + 0x90], %f40
+	ldd	[%o0 + 0x98], %f42
+	ldd	[%o0 + 0xa0], %f44
+	ldd	[%o0 + 0xa8], %f46
+	ldd	[%o0 + 0xb0], %f48
+	ldd	[%o0 + 0xb8], %f50
+	ldd	[%o0 + 0xc0], %f52
+	ldd	[%o0 + 0xc8], %f54
+
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS(40, 0, 2)
+	fxor	%f52, %f2, %f2
+	fxor	%f54, %f0, %f0
+
+	st	%f2, [%o2 + 0x00]
+	st	%f3, [%o2 + 0x04]
+	st	%f0, [%o2 + 0x08]
+	st	%f1, [%o2 + 0x0c]
+
+	retl
+	 VISExit
+ENDPROC(camellia_sparc64_crypt)
+
+	.align	32
+ENTRY(camellia_sparc64_load_keys)
+	/* %o0=key, %o1=key_len */
+	VISEntry
+	ldd	[%o0 + 0x00], %f4
+	ldd	[%o0 + 0x08], %f6
+	ldd	[%o0 + 0x10], %f8
+	ldd	[%o0 + 0x18], %f10
+	ldd	[%o0 + 0x20], %f12
+	ldd	[%o0 + 0x28], %f14
+	ldd	[%o0 + 0x30], %f16
+	ldd	[%o0 + 0x38], %f18
+	ldd	[%o0 + 0x40], %f20
+	ldd	[%o0 + 0x48], %f22
+	ldd	[%o0 + 0x50], %f24
+	ldd	[%o0 + 0x58], %f26
+	ldd	[%o0 + 0x60], %f28
+	ldd	[%o0 + 0x68], %f30
+	ldd	[%o0 + 0x70], %f32
+	ldd	[%o0 + 0x78], %f34
+	ldd	[%o0 + 0x80], %f36
+	ldd	[%o0 + 0x88], %f38
+	ldd	[%o0 + 0x90], %f40
+	ldd	[%o0 + 0x98], %f42
+	ldd	[%o0 + 0xa0], %f44
+	ldd	[%o0 + 0xa8], %f46
+	ldd	[%o0 + 0xb0], %f48
+	ldd	[%o0 + 0xb8], %f50
+	ldd	[%o0 + 0xc0], %f52
+	retl
+	 ldd	[%o0 + 0xc8], %f54
+ENDPROC(camellia_sparc64_load_keys)
+
+	.align	32
+ENTRY(camellia_sparc64_ecb_crypt_3_grand_rounds)
+	/* %o0=input, %o1=output, %o2=len, %o3=key */
+1:	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	add	%o0, 0x10, %o0
+	fxor	%f4, %f0, %f0
+	fxor	%f6, %f2, %f2
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS(40, 0, 2)
+	fxor	%f52, %f2, %f2
+	fxor	%f54, %f0, %f0
+	std	%f2, [%o1 + 0x00]
+	std	%f0, [%o1 + 0x08]
+	subcc	%o2, 0x10, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x10, %o1
+	retl
+	 nop
+ENDPROC(camellia_sparc64_ecb_crypt_3_grand_rounds)
+
+	.align	32
+ENTRY(camellia_sparc64_ecb_crypt_4_grand_rounds)
+	/* %o0=input, %o1=output, %o2=len, %o3=key */
+1:	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	add	%o0, 0x10, %o0
+	fxor	%f4, %f0, %f0
+	fxor	%f6, %f2, %f2
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	ldd	[%o3 + 0xd0], %f8
+	ldd	[%o3 + 0xd8], %f10
+	ldd	[%o3 + 0xe0], %f12
+	ldd	[%o3 + 0xe8], %f14
+	ldd	[%o3 + 0xf0], %f16
+	ldd	[%o3 + 0xf8], %f18
+	ldd	[%o3 + 0x100], %f20
+	ldd	[%o3 + 0x108], %f22
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(40, 0, 2)
+	CAMELLIA_F(8, 2, 0, 2)
+	CAMELLIA_F(10, 0, 2, 0)
+	ldd	[%o3 + 0x10], %f8
+	ldd	[%o3 + 0x18], %f10
+	CAMELLIA_F(12, 2, 0, 2)
+	CAMELLIA_F(14, 0, 2, 0)
+	ldd	[%o3 + 0x20], %f12
+	ldd	[%o3 + 0x28], %f14
+	CAMELLIA_F(16, 2, 0, 2)
+	CAMELLIA_F(18, 0, 2, 0)
+	ldd	[%o3 + 0x30], %f16
+	ldd	[%o3 + 0x38], %f18
+	fxor	%f20, %f2, %f2
+	fxor	%f22, %f0, %f0
+	ldd	[%o3 + 0x40], %f20
+	ldd	[%o3 + 0x48], %f22
+	std	%f2, [%o1 + 0x00]
+	std	%f0, [%o1 + 0x08]
+	subcc	%o2, 0x10, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x10, %o1
+	retl
+	 nop
+ENDPROC(camellia_sparc64_ecb_crypt_4_grand_rounds)
+
+	.align	32
+ENTRY(camellia_sparc64_cbc_encrypt_3_grand_rounds)
+	/* %o0=input, %o1=output, %o2=len, %o3=key, %o4=IV */
+	ldd	[%o4 + 0x00], %f60
+	ldd	[%o4 + 0x08], %f62
+1:	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	add	%o0, 0x10, %o0
+	fxor	%f60, %f0, %f0
+	fxor	%f62, %f2, %f2
+	fxor	%f4, %f0, %f0
+	fxor	%f6, %f2, %f2
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS(40, 0, 2)
+	fxor	%f52, %f2, %f60
+	fxor	%f54, %f0, %f62
+	std	%f60, [%o1 + 0x00]
+	std	%f62, [%o1 + 0x08]
+	subcc	%o2, 0x10, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x10, %o1
+	std	%f60, [%o4 + 0x00]
+	retl
+	 std	%f62, [%o4 + 0x08]
+ENDPROC(camellia_sparc64_cbc_encrypt_3_grand_rounds)
+
+	.align	32
+ENTRY(camellia_sparc64_cbc_encrypt_4_grand_rounds)
+	/* %o0=input, %o1=output, %o2=len, %o3=key, %o4=IV */
+	ldd	[%o4 + 0x00], %f60
+	ldd	[%o4 + 0x08], %f62
+1:	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	add	%o0, 0x10, %o0
+	fxor	%f60, %f0, %f0
+	fxor	%f62, %f2, %f2
+	fxor	%f4, %f0, %f0
+	fxor	%f6, %f2, %f2
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	ldd	[%o3 + 0xd0], %f8
+	ldd	[%o3 + 0xd8], %f10
+	ldd	[%o3 + 0xe0], %f12
+	ldd	[%o3 + 0xe8], %f14
+	ldd	[%o3 + 0xf0], %f16
+	ldd	[%o3 + 0xf8], %f18
+	ldd	[%o3 + 0x100], %f20
+	ldd	[%o3 + 0x108], %f22
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(40, 0, 2)
+	CAMELLIA_F(8, 2, 0, 2)
+	CAMELLIA_F(10, 0, 2, 0)
+	ldd	[%o3 + 0x10], %f8
+	ldd	[%o3 + 0x18], %f10
+	CAMELLIA_F(12, 2, 0, 2)
+	CAMELLIA_F(14, 0, 2, 0)
+	ldd	[%o3 + 0x20], %f12
+	ldd	[%o3 + 0x28], %f14
+	CAMELLIA_F(16, 2, 0, 2)
+	CAMELLIA_F(18, 0, 2, 0)
+	ldd	[%o3 + 0x30], %f16
+	ldd	[%o3 + 0x38], %f18
+	fxor	%f20, %f2, %f60
+	fxor	%f22, %f0, %f62
+	ldd	[%o3 + 0x40], %f20
+	ldd	[%o3 + 0x48], %f22
+	std	%f60, [%o1 + 0x00]
+	std	%f62, [%o1 + 0x08]
+	subcc	%o2, 0x10, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x10, %o1
+	std	%f60, [%o4 + 0x00]
+	retl
+	 std	%f62, [%o4 + 0x08]
+ENDPROC(camellia_sparc64_cbc_encrypt_4_grand_rounds)
+
+	.align	32
+ENTRY(camellia_sparc64_cbc_decrypt_3_grand_rounds)
+	/* %o0=input, %o1=output, %o2=len, %o3=key, %o4=IV */
+	ldd	[%o4 + 0x00], %f60
+	ldd	[%o4 + 0x08], %f62
+1:	ldd	[%o0 + 0x00], %f56
+	ldd	[%o0 + 0x08], %f58
+	add	%o0, 0x10, %o0
+	fxor	%f4, %f56, %f0
+	fxor	%f6, %f58, %f2
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS(40, 0, 2)
+	fxor	%f52, %f2, %f2
+	fxor	%f54, %f0, %f0
+	fxor	%f60, %f2, %f2
+	fxor	%f62, %f0, %f0
+	fsrc2	%f56, %f60
+	fsrc2	%f58, %f62
+	std	%f2, [%o1 + 0x00]
+	std	%f0, [%o1 + 0x08]
+	subcc	%o2, 0x10, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x10, %o1
+	std	%f60, [%o4 + 0x00]
+	retl
+	 std	%f62, [%o4 + 0x08]
+ENDPROC(camellia_sparc64_cbc_decrypt_3_grand_rounds)
+
+	.align	32
+ENTRY(camellia_sparc64_cbc_decrypt_4_grand_rounds)
+	/* %o0=input, %o1=output, %o2=len, %o3=key, %o4=IV */
+	ldd	[%o4 + 0x00], %f60
+	ldd	[%o4 + 0x08], %f62
+1:	ldd	[%o0 + 0x00], %f56
+	ldd	[%o0 + 0x08], %f58
+	add	%o0, 0x10, %o0
+	fxor	%f4, %f56, %f0
+	fxor	%f6, %f58, %f2
+	CAMELLIA_6ROUNDS_FL_FLI( 8, 0, 2)
+	ldd	[%o3 + 0xd0], %f8
+	ldd	[%o3 + 0xd8], %f10
+	ldd	[%o3 + 0xe0], %f12
+	ldd	[%o3 + 0xe8], %f14
+	ldd	[%o3 + 0xf0], %f16
+	ldd	[%o3 + 0xf8], %f18
+	ldd	[%o3 + 0x100], %f20
+	ldd	[%o3 + 0x108], %f22
+	CAMELLIA_6ROUNDS_FL_FLI(24, 0, 2)
+	CAMELLIA_6ROUNDS_FL_FLI(40, 0, 2)
+	CAMELLIA_F(8, 2, 0, 2)
+	CAMELLIA_F(10, 0, 2, 0)
+	ldd	[%o3 + 0x10], %f8
+	ldd	[%o3 + 0x18], %f10
+	CAMELLIA_F(12, 2, 0, 2)
+	CAMELLIA_F(14, 0, 2, 0)
+	ldd	[%o3 + 0x20], %f12
+	ldd	[%o3 + 0x28], %f14
+	CAMELLIA_F(16, 2, 0, 2)
+	CAMELLIA_F(18, 0, 2, 0)
+	ldd	[%o3 + 0x30], %f16
+	ldd	[%o3 + 0x38], %f18
+	fxor	%f20, %f2, %f2
+	fxor	%f22, %f0, %f0
+	ldd	[%o3 + 0x40], %f20
+	ldd	[%o3 + 0x48], %f22
+	fxor	%f60, %f2, %f2
+	fxor	%f62, %f0, %f0
+	fsrc2	%f56, %f60
+	fsrc2	%f58, %f62
+	std	%f2, [%o1 + 0x00]
+	std	%f0, [%o1 + 0x08]
+	subcc	%o2, 0x10, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x10, %o1
+	std	%f60, [%o4 + 0x00]
+	retl
+	 std	%f62, [%o4 + 0x08]
+ENDPROC(camellia_sparc64_cbc_decrypt_4_grand_rounds)
diff --git a/arch/sparc/crypto/camellia_glue.c b/arch/sparc/crypto/camellia_glue.c
new file mode 100644
index 000000000000..42905c084299
--- /dev/null
+++ b/arch/sparc/crypto/camellia_glue.c
@@ -0,0 +1,322 @@
+/* Glue code for CAMELLIA encryption optimized for sparc64 crypto opcodes.
+ *
+ * Copyright (C) 2012 David S. Miller <davem@davemloft.net>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <crypto/algapi.h>
+
+#include <asm/fpumacro.h>
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+#define CAMELLIA_MIN_KEY_SIZE        16
+#define CAMELLIA_MAX_KEY_SIZE        32
+#define CAMELLIA_BLOCK_SIZE          16
+#define CAMELLIA_TABLE_BYTE_LEN     272
+
+struct camellia_sparc64_ctx {
+	u64 encrypt_key[CAMELLIA_TABLE_BYTE_LEN / sizeof(u64)];
+	u64 decrypt_key[CAMELLIA_TABLE_BYTE_LEN / sizeof(u64)];
+	int key_len;
+};
+
+extern void camellia_sparc64_key_expand(const u32 *in_key, u64 *encrypt_key,
+					unsigned int key_len, u64 *decrypt_key);
+
+static int camellia_set_key(struct crypto_tfm *tfm, const u8 *_in_key,
+			    unsigned int key_len)
+{
+	struct camellia_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+	const u32 *in_key = (const u32 *) _in_key;
+	u32 *flags = &tfm->crt_flags;
+
+	if (key_len != 16 && key_len != 24 && key_len != 32) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	ctx->key_len = key_len;
+
+	camellia_sparc64_key_expand(in_key, &ctx->encrypt_key[0],
+				    key_len, &ctx->decrypt_key[0]);
+	return 0;
+}
+
+extern void camellia_sparc64_crypt(const u64 *key, const u32 *input,
+				   u32 *output, unsigned int key_len);
+
+static void camellia_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct camellia_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	camellia_sparc64_crypt(&ctx->encrypt_key[0],
+			       (const u32 *) src,
+			       (u32 *) dst, ctx->key_len);
+}
+
+static void camellia_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct camellia_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	camellia_sparc64_crypt(&ctx->decrypt_key[0],
+			       (const u32 *) src,
+			       (u32 *) dst, ctx->key_len);
+}
+
+extern void camellia_sparc64_load_keys(const u64 *key, unsigned int key_len);
+
+typedef void ecb_crypt_op(const u64 *input, u64 *output, unsigned int len,
+			  const u64 *key);
+
+extern ecb_crypt_op camellia_sparc64_ecb_crypt_3_grand_rounds;
+extern ecb_crypt_op camellia_sparc64_ecb_crypt_4_grand_rounds;
+
+#define CAMELLIA_BLOCK_MASK	(~(CAMELLIA_BLOCK_SIZE - 1))
+
+static int __ecb_crypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes, bool encrypt)
+{
+	struct camellia_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	ecb_crypt_op *op;
+	const u64 *key;
+	int err;
+
+	op = camellia_sparc64_ecb_crypt_3_grand_rounds;
+	if (ctx->key_len != 16)
+		op = camellia_sparc64_ecb_crypt_4_grand_rounds;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	if (encrypt)
+		key = &ctx->encrypt_key[0];
+	else
+		key = &ctx->decrypt_key[0];
+	camellia_sparc64_load_keys(key, ctx->key_len);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & CAMELLIA_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			const u64 *src64;
+			u64 *dst64;
+
+			src64 = (const u64 *)walk.src.virt.addr;
+			dst64 = (u64 *) walk.dst.virt.addr;
+			op(src64, dst64, block_len, key);
+		}
+		nbytes &= CAMELLIA_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int ecb_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return __ecb_crypt(desc, dst, src, nbytes, true);
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return __ecb_crypt(desc, dst, src, nbytes, false);
+}
+
+typedef void cbc_crypt_op(const u64 *input, u64 *output, unsigned int len,
+			  const u64 *key, u64 *iv);
+
+extern cbc_crypt_op camellia_sparc64_cbc_encrypt_3_grand_rounds;
+extern cbc_crypt_op camellia_sparc64_cbc_encrypt_4_grand_rounds;
+extern cbc_crypt_op camellia_sparc64_cbc_decrypt_3_grand_rounds;
+extern cbc_crypt_op camellia_sparc64_cbc_decrypt_4_grand_rounds;
+
+static int cbc_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct camellia_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	cbc_crypt_op *op;
+	const u64 *key;
+	int err;
+
+	op = camellia_sparc64_cbc_encrypt_3_grand_rounds;
+	if (ctx->key_len != 16)
+		op = camellia_sparc64_cbc_encrypt_4_grand_rounds;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	key = &ctx->encrypt_key[0];
+	camellia_sparc64_load_keys(key, ctx->key_len);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & CAMELLIA_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			const u64 *src64;
+			u64 *dst64;
+
+			src64 = (const u64 *)walk.src.virt.addr;
+			dst64 = (u64 *) walk.dst.virt.addr;
+			op(src64, dst64, block_len, key,
+			   (u64 *) walk.iv);
+		}
+		nbytes &= CAMELLIA_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct camellia_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	cbc_crypt_op *op;
+	const u64 *key;
+	int err;
+
+	op = camellia_sparc64_cbc_decrypt_3_grand_rounds;
+	if (ctx->key_len != 16)
+		op = camellia_sparc64_cbc_decrypt_4_grand_rounds;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	key = &ctx->decrypt_key[0];
+	camellia_sparc64_load_keys(key, ctx->key_len);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & CAMELLIA_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			const u64 *src64;
+			u64 *dst64;
+
+			src64 = (const u64 *)walk.src.virt.addr;
+			dst64 = (u64 *) walk.dst.virt.addr;
+			op(src64, dst64, block_len, key,
+			   (u64 *) walk.iv);
+		}
+		nbytes &= CAMELLIA_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static struct crypto_alg algs[] = { {
+	.cra_name		= "camellia",
+	.cra_driver_name	= "camellia-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= CAMELLIA_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct camellia_sparc64_ctx),
+	.cra_alignmask		= 3,
+	.cra_module		= THIS_MODULE,
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= CAMELLIA_MIN_KEY_SIZE,
+			.cia_max_keysize	= CAMELLIA_MAX_KEY_SIZE,
+			.cia_setkey		= camellia_set_key,
+			.cia_encrypt		= camellia_encrypt,
+			.cia_decrypt		= camellia_decrypt
+		}
+	}
+}, {
+	.cra_name		= "ecb(camellia)",
+	.cra_driver_name	= "ecb-camellia-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAMELLIA_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct camellia_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAMELLIA_MIN_KEY_SIZE,
+			.max_keysize	= CAMELLIA_MAX_KEY_SIZE,
+			.setkey		= camellia_set_key,
+			.encrypt	= ecb_encrypt,
+			.decrypt	= ecb_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "cbc(camellia)",
+	.cra_driver_name	= "cbc-camellia-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAMELLIA_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct camellia_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAMELLIA_MIN_KEY_SIZE,
+			.max_keysize	= CAMELLIA_MAX_KEY_SIZE,
+			.setkey		= camellia_set_key,
+			.encrypt	= cbc_encrypt,
+			.decrypt	= cbc_decrypt,
+		},
+	},
+}
+};
+
+static bool __init sparc64_has_camellia_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_CAMELLIA))
+		return false;
+
+	return true;
+}
+
+static int __init camellia_sparc64_mod_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(algs); i++)
+		INIT_LIST_HEAD(&algs[i].cra_list);
+
+	if (sparc64_has_camellia_opcode()) {
+		pr_info("Using sparc64 camellia opcodes optimized CAMELLIA implementation\n");
+		return crypto_register_algs(algs, ARRAY_SIZE(algs));
+	}
+	pr_info("sparc64 camellia opcodes not available.\n");
+	return -ENODEV;
+}
+
+static void __exit camellia_sparc64_mod_fini(void)
+{
+	crypto_unregister_algs(algs, ARRAY_SIZE(algs));
+}
+
+module_init(camellia_sparc64_mod_init);
+module_exit(camellia_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Camellia Cipher Algorithm, sparc64 camellia opcode accelerated");
+
+MODULE_ALIAS("aes");
diff --git a/arch/sparc/crypto/crc32c_asm.S b/arch/sparc/crypto/crc32c_asm.S
new file mode 100644
index 000000000000..2b1976e765b5
--- /dev/null
+++ b/arch/sparc/crypto/crc32c_asm.S
@@ -0,0 +1,20 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+#include <asm/asi.h>
+
+#include "opcodes.h"
+
+ENTRY(crc32c_sparc64)
+	/* %o0=crc32p, %o1=data_ptr, %o2=len */
+	VISEntryHalf
+	lda	[%o0] ASI_PL, %f1
+1:	ldd	[%o1], %f2
+	CRC32C(0,2,0)
+	subcc	%o2, 8, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x8, %o1
+	sta	%f1, [%o0] ASI_PL
+	VISExitHalf
+2:	retl
+	 nop
+ENDPROC(crc32c_sparc64)
diff --git a/arch/sparc/crypto/crc32c_glue.c b/arch/sparc/crypto/crc32c_glue.c
new file mode 100644
index 000000000000..0bd89cea8d8e
--- /dev/null
+++ b/arch/sparc/crypto/crc32c_glue.c
@@ -0,0 +1,179 @@
+/* Glue code for CRC32C optimized for sparc64 crypto opcodes.
+ *
+ * This is based largely upon arch/x86/crypto/crc32c-intel.c
+ *
+ * Copyright (C) 2008 Intel Corporation
+ * Authors: Austin Zhang <austin_zhang@linux.intel.com>
+ *          Kent Liu <kent.liu@intel.com>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/crc32.h>
+
+#include <crypto/internal/hash.h>
+
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+/*
+ * Setting the seed allows arbitrary accumulators and flexible XOR policy
+ * If your algorithm starts with ~0, then XOR with ~0 before you set
+ * the seed.
+ */
+static int crc32c_sparc64_setkey(struct crypto_shash *hash, const u8 *key,
+				 unsigned int keylen)
+{
+	u32 *mctx = crypto_shash_ctx(hash);
+
+	if (keylen != sizeof(u32)) {
+		crypto_shash_set_flags(hash, CRYPTO_TFM_RES_BAD_KEY_LEN);
+		return -EINVAL;
+	}
+	*(__le32 *)mctx = le32_to_cpup((__le32 *)key);
+	return 0;
+}
+
+static int crc32c_sparc64_init(struct shash_desc *desc)
+{
+	u32 *mctx = crypto_shash_ctx(desc->tfm);
+	u32 *crcp = shash_desc_ctx(desc);
+
+	*crcp = *mctx;
+
+	return 0;
+}
+
+extern void crc32c_sparc64(u32 *crcp, const u64 *data, unsigned int len);
+
+static void crc32c_compute(u32 *crcp, const u64 *data, unsigned int len)
+{
+	unsigned int asm_len;
+
+	asm_len = len & ~7U;
+	if (asm_len) {
+		crc32c_sparc64(crcp, data, asm_len);
+		data += asm_len / 8;
+		len -= asm_len;
+	}
+	if (len)
+		*crcp = __crc32c_le(*crcp, (const unsigned char *) data, len);
+}
+
+static int crc32c_sparc64_update(struct shash_desc *desc, const u8 *data,
+				 unsigned int len)
+{
+	u32 *crcp = shash_desc_ctx(desc);
+
+	crc32c_compute(crcp, (const u64 *) data, len);
+
+	return 0;
+}
+
+static int __crc32c_sparc64_finup(u32 *crcp, const u8 *data, unsigned int len,
+				  u8 *out)
+{
+	u32 tmp = *crcp;
+
+	crc32c_compute(&tmp, (const u64 *) data, len);
+
+	*(__le32 *) out = ~cpu_to_le32(tmp);
+	return 0;
+}
+
+static int crc32c_sparc64_finup(struct shash_desc *desc, const u8 *data,
+				unsigned int len, u8 *out)
+{
+	return __crc32c_sparc64_finup(shash_desc_ctx(desc), data, len, out);
+}
+
+static int crc32c_sparc64_final(struct shash_desc *desc, u8 *out)
+{
+	u32 *crcp = shash_desc_ctx(desc);
+
+	*(__le32 *) out = ~cpu_to_le32p(crcp);
+	return 0;
+}
+
+static int crc32c_sparc64_digest(struct shash_desc *desc, const u8 *data,
+				 unsigned int len, u8 *out)
+{
+	return __crc32c_sparc64_finup(crypto_shash_ctx(desc->tfm), data, len,
+				      out);
+}
+
+static int crc32c_sparc64_cra_init(struct crypto_tfm *tfm)
+{
+	u32 *key = crypto_tfm_ctx(tfm);
+
+	*key = ~0;
+
+	return 0;
+}
+
+#define CHKSUM_BLOCK_SIZE	1
+#define CHKSUM_DIGEST_SIZE	4
+
+static struct shash_alg alg = {
+	.setkey			=	crc32c_sparc64_setkey,
+	.init			=	crc32c_sparc64_init,
+	.update			=	crc32c_sparc64_update,
+	.final			=	crc32c_sparc64_final,
+	.finup			=	crc32c_sparc64_finup,
+	.digest			=	crc32c_sparc64_digest,
+	.descsize		=	sizeof(u32),
+	.digestsize		=	CHKSUM_DIGEST_SIZE,
+	.base			=	{
+		.cra_name		=	"crc32c",
+		.cra_driver_name	=	"crc32c-sparc64",
+		.cra_priority		=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
+		.cra_ctxsize		=	sizeof(u32),
+		.cra_alignmask		=	7,
+		.cra_module		=	THIS_MODULE,
+		.cra_init		=	crc32c_sparc64_cra_init,
+	}
+};
+
+static bool __init sparc64_has_crc32c_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_CRC32C))
+		return false;
+
+	return true;
+}
+
+static int __init crc32c_sparc64_mod_init(void)
+{
+	if (sparc64_has_crc32c_opcode()) {
+		pr_info("Using sparc64 crc32c opcode optimized CRC32C implementation\n");
+		return crypto_register_shash(&alg);
+	}
+	pr_info("sparc64 crc32c opcode not available.\n");
+	return -ENODEV;
+}
+
+static void __exit crc32c_sparc64_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+module_init(crc32c_sparc64_mod_init);
+module_exit(crc32c_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CRC32c (Castagnoli), sparc64 crc32c opcode accelerated");
+
+MODULE_ALIAS("crc32c");
diff --git a/arch/sparc/crypto/crop_devid.c b/arch/sparc/crypto/crop_devid.c
new file mode 100644
index 000000000000..5f5724a0ae22
--- /dev/null
+++ b/arch/sparc/crypto/crop_devid.c
@@ -0,0 +1,14 @@
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+/* This is a dummy device table linked into all of the crypto
+ * opcode drivers.  It serves to trigger the module autoloading
+ * mechanisms in userspace which scan the OF device tree and
+ * load any modules which have device table entries that
+ * match OF device nodes.
+ */
+static const struct of_device_id crypto_opcode_match[] = {
+	{ .name = "cpu", .compatible = "sun4v", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, crypto_opcode_match);
diff --git a/arch/sparc/crypto/des_asm.S b/arch/sparc/crypto/des_asm.S
new file mode 100644
index 000000000000..30b6e90b28b2
--- /dev/null
+++ b/arch/sparc/crypto/des_asm.S
@@ -0,0 +1,418 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+	.align	32
+ENTRY(des_sparc64_key_expand)
+	/* %o0=input_key, %o1=output_key */
+	VISEntryHalf
+	ld	[%o0 + 0x00], %f0
+	ld	[%o0 + 0x04], %f1
+	DES_KEXPAND(0, 0, 0)
+	DES_KEXPAND(0, 1, 2)
+	DES_KEXPAND(2, 3, 6)
+	DES_KEXPAND(2, 2, 4)
+	DES_KEXPAND(6, 3, 10)
+	DES_KEXPAND(6, 2, 8)
+	DES_KEXPAND(10, 3, 14)
+	DES_KEXPAND(10, 2, 12)
+	DES_KEXPAND(14, 1, 16)
+	DES_KEXPAND(16, 3, 20)
+	DES_KEXPAND(16, 2, 18)
+	DES_KEXPAND(20, 3, 24)
+	DES_KEXPAND(20, 2, 22)
+	DES_KEXPAND(24, 3, 28)
+	DES_KEXPAND(24, 2, 26)
+	DES_KEXPAND(28, 1, 30)
+	std	%f0, [%o1 + 0x00]
+	std	%f2, [%o1 + 0x08]
+	std	%f4, [%o1 + 0x10]
+	std	%f6, [%o1 + 0x18]
+	std	%f8, [%o1 + 0x20]
+	std	%f10, [%o1 + 0x28]
+	std	%f12, [%o1 + 0x30]
+	std	%f14, [%o1 + 0x38]
+	std	%f16, [%o1 + 0x40]
+	std	%f18, [%o1 + 0x48]
+	std	%f20, [%o1 + 0x50]
+	std	%f22, [%o1 + 0x58]
+	std	%f24, [%o1 + 0x60]
+	std	%f26, [%o1 + 0x68]
+	std	%f28, [%o1 + 0x70]
+	std	%f30, [%o1 + 0x78]
+	retl
+	 VISExitHalf
+ENDPROC(des_sparc64_key_expand)
+
+	.align	32
+ENTRY(des_sparc64_crypt)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ldd	[%o1 + 0x00], %f32
+	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	ldd	[%o0 + 0x30], %f12
+	ldd	[%o0 + 0x38], %f14
+	ldd	[%o0 + 0x40], %f16
+	ldd	[%o0 + 0x48], %f18
+	ldd	[%o0 + 0x50], %f20
+	ldd	[%o0 + 0x58], %f22
+	ldd	[%o0 + 0x60], %f24
+	ldd	[%o0 + 0x68], %f26
+	ldd	[%o0 + 0x70], %f28
+	ldd	[%o0 + 0x78], %f30
+	DES_IP(32, 32)
+	DES_ROUND(0, 2, 32, 32)
+	DES_ROUND(4, 6, 32, 32)
+	DES_ROUND(8, 10, 32, 32)
+	DES_ROUND(12, 14, 32, 32)
+	DES_ROUND(16, 18, 32, 32)
+	DES_ROUND(20, 22, 32, 32)
+	DES_ROUND(24, 26, 32, 32)
+	DES_ROUND(28, 30, 32, 32)
+	DES_IIP(32, 32)
+	std	%f32, [%o2 + 0x00]
+	retl
+	 VISExit
+ENDPROC(des_sparc64_crypt)
+
+	.align	32
+ENTRY(des_sparc64_load_keys)
+	/* %o0=key */
+	VISEntry
+	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	ldd	[%o0 + 0x30], %f12
+	ldd	[%o0 + 0x38], %f14
+	ldd	[%o0 + 0x40], %f16
+	ldd	[%o0 + 0x48], %f18
+	ldd	[%o0 + 0x50], %f20
+	ldd	[%o0 + 0x58], %f22
+	ldd	[%o0 + 0x60], %f24
+	ldd	[%o0 + 0x68], %f26
+	ldd	[%o0 + 0x70], %f28
+	retl
+	 ldd	[%o0 + 0x78], %f30
+ENDPROC(des_sparc64_load_keys)
+
+	.align	32
+ENTRY(des_sparc64_ecb_crypt)
+	/* %o0=input, %o1=output, %o2=len */
+1:	ldd	[%o0 + 0x00], %f32
+	add	%o0, 0x08, %o0
+	DES_IP(32, 32)
+	DES_ROUND(0, 2, 32, 32)
+	DES_ROUND(4, 6, 32, 32)
+	DES_ROUND(8, 10, 32, 32)
+	DES_ROUND(12, 14, 32, 32)
+	DES_ROUND(16, 18, 32, 32)
+	DES_ROUND(20, 22, 32, 32)
+	DES_ROUND(24, 26, 32, 32)
+	DES_ROUND(28, 30, 32, 32)
+	DES_IIP(32, 32)
+	std	%f32, [%o1 + 0x00]
+	subcc	%o2, 0x08, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x08, %o1
+	retl
+	 nop
+ENDPROC(des_sparc64_ecb_crypt)
+
+	.align	32
+ENTRY(des_sparc64_cbc_encrypt)
+	/* %o0=input, %o1=output, %o2=len, %o3=IV */
+	ldd	[%o3 + 0x00], %f32
+1:	ldd	[%o0 + 0x00], %f34
+	fxor	%f32, %f34, %f32
+	DES_IP(32, 32)
+	DES_ROUND(0, 2, 32, 32)
+	DES_ROUND(4, 6, 32, 32)
+	DES_ROUND(8, 10, 32, 32)
+	DES_ROUND(12, 14, 32, 32)
+	DES_ROUND(16, 18, 32, 32)
+	DES_ROUND(20, 22, 32, 32)
+	DES_ROUND(24, 26, 32, 32)
+	DES_ROUND(28, 30, 32, 32)
+	DES_IIP(32, 32)
+	std	%f32, [%o1 + 0x00]
+	add	%o0, 0x08, %o0
+	subcc	%o2, 0x08, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x08, %o1
+	retl
+	 std	%f32, [%o3 + 0x00]
+ENDPROC(des_sparc64_cbc_encrypt)
+
+	.align	32
+ENTRY(des_sparc64_cbc_decrypt)
+	/* %o0=input, %o1=output, %o2=len, %o3=IV */
+	ldd	[%o3 + 0x00], %f34
+1:	ldd	[%o0 + 0x00], %f36
+	DES_IP(36, 32)
+	DES_ROUND(0, 2, 32, 32)
+	DES_ROUND(4, 6, 32, 32)
+	DES_ROUND(8, 10, 32, 32)
+	DES_ROUND(12, 14, 32, 32)
+	DES_ROUND(16, 18, 32, 32)
+	DES_ROUND(20, 22, 32, 32)
+	DES_ROUND(24, 26, 32, 32)
+	DES_ROUND(28, 30, 32, 32)
+	DES_IIP(32, 32)
+	fxor	%f32, %f34, %f32
+	fsrc2	%f36, %f34
+	std	%f32, [%o1 + 0x00]
+	add	%o0, 0x08, %o0
+	subcc	%o2, 0x08, %o2
+	bne,pt	%icc, 1b
+	 add	%o1, 0x08, %o1
+	retl
+	 std	%f36, [%o3 + 0x00]
+ENDPROC(des_sparc64_cbc_decrypt)
+
+	.align	32
+ENTRY(des3_ede_sparc64_crypt)
+	/* %o0=key, %o1=input, %o2=output */
+	VISEntry
+	ldd	[%o1 + 0x00], %f32
+	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	ldd	[%o0 + 0x30], %f12
+	ldd	[%o0 + 0x38], %f14
+	ldd	[%o0 + 0x40], %f16
+	ldd	[%o0 + 0x48], %f18
+	ldd	[%o0 + 0x50], %f20
+	ldd	[%o0 + 0x58], %f22
+	ldd	[%o0 + 0x60], %f24
+	ldd	[%o0 + 0x68], %f26
+	ldd	[%o0 + 0x70], %f28
+	ldd	[%o0 + 0x78], %f30
+	DES_IP(32, 32)
+	DES_ROUND(0, 2, 32, 32)
+	ldd	[%o0 + 0x80], %f0
+	ldd	[%o0 + 0x88], %f2
+	DES_ROUND(4, 6, 32, 32)
+	ldd	[%o0 + 0x90], %f4
+	ldd	[%o0 + 0x98], %f6
+	DES_ROUND(8, 10, 32, 32)
+	ldd	[%o0 + 0xa0], %f8
+	ldd	[%o0 + 0xa8], %f10
+	DES_ROUND(12, 14, 32, 32)
+	ldd	[%o0 + 0xb0], %f12
+	ldd	[%o0 + 0xb8], %f14
+	DES_ROUND(16, 18, 32, 32)
+	ldd	[%o0 + 0xc0], %f16
+	ldd	[%o0 + 0xc8], %f18
+	DES_ROUND(20, 22, 32, 32)
+	ldd	[%o0 + 0xd0], %f20
+	ldd	[%o0 + 0xd8], %f22
+	DES_ROUND(24, 26, 32, 32)
+	ldd	[%o0 + 0xe0], %f24
+	ldd	[%o0 + 0xe8], %f26
+	DES_ROUND(28, 30, 32, 32)
+	ldd	[%o0 + 0xf0], %f28
+	ldd	[%o0 + 0xf8], %f30
+	DES_IIP(32, 32)
+	DES_IP(32, 32)
+	DES_ROUND(0, 2, 32, 32)
+	ldd	[%o0 + 0x100], %f0
+	ldd	[%o0 + 0x108], %f2
+	DES_ROUND(4, 6, 32, 32)
+	ldd	[%o0 + 0x110], %f4
+	ldd	[%o0 + 0x118], %f6
+	DES_ROUND(8, 10, 32, 32)
+	ldd	[%o0 + 0x120], %f8
+	ldd	[%o0 + 0x128], %f10
+	DES_ROUND(12, 14, 32, 32)
+	ldd	[%o0 + 0x130], %f12
+	ldd	[%o0 + 0x138], %f14
+	DES_ROUND(16, 18, 32, 32)
+	ldd	[%o0 + 0x140], %f16
+	ldd	[%o0 + 0x148], %f18
+	DES_ROUND(20, 22, 32, 32)
+	ldd	[%o0 + 0x150], %f20
+	ldd	[%o0 + 0x158], %f22
+	DES_ROUND(24, 26, 32, 32)
+	ldd	[%o0 + 0x160], %f24
+	ldd	[%o0 + 0x168], %f26
+	DES_ROUND(28, 30, 32, 32)
+	ldd	[%o0 + 0x170], %f28
+	ldd	[%o0 + 0x178], %f30
+	DES_IIP(32, 32)
+	DES_IP(32, 32)
+	DES_ROUND(0, 2, 32, 32)
+	DES_ROUND(4, 6, 32, 32)
+	DES_ROUND(8, 10, 32, 32)
+	DES_ROUND(12, 14, 32, 32)
+	DES_ROUND(16, 18, 32, 32)
+	DES_ROUND(20, 22, 32, 32)
+	DES_ROUND(24, 26, 32, 32)
+	DES_ROUND(28, 30, 32, 32)
+	DES_IIP(32, 32)
+
+	std	%f32, [%o2 + 0x00]
+	retl
+	 VISExit
+ENDPROC(des3_ede_sparc64_crypt)
+
+	.align	32
+ENTRY(des3_ede_sparc64_load_keys)
+	/* %o0=key */
+	VISEntry
+	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	ldd	[%o0 + 0x30], %f12
+	ldd	[%o0 + 0x38], %f14
+	ldd	[%o0 + 0x40], %f16
+	ldd	[%o0 + 0x48], %f18
+	ldd	[%o0 + 0x50], %f20
+	ldd	[%o0 + 0x58], %f22
+	ldd	[%o0 + 0x60], %f24
+	ldd	[%o0 + 0x68], %f26
+	ldd	[%o0 + 0x70], %f28
+	ldd	[%o0 + 0x78], %f30
+	ldd	[%o0 + 0x80], %f32
+	ldd	[%o0 + 0x88], %f34
+	ldd	[%o0 + 0x90], %f36
+	ldd	[%o0 + 0x98], %f38
+	ldd	[%o0 + 0xa0], %f40
+	ldd	[%o0 + 0xa8], %f42
+	ldd	[%o0 + 0xb0], %f44
+	ldd	[%o0 + 0xb8], %f46
+	ldd	[%o0 + 0xc0], %f48
+	ldd	[%o0 + 0xc8], %f50
+	ldd	[%o0 + 0xd0], %f52
+	ldd	[%o0 + 0xd8], %f54
+	ldd	[%o0 + 0xe0], %f56
+	retl
+	 ldd	[%o0 + 0xe8], %f58
+ENDPROC(des3_ede_sparc64_load_keys)
+
+#define DES3_LOOP_BODY(X) \
+	DES_IP(X, X) \
+	DES_ROUND(0, 2, X, X) \
+	DES_ROUND(4, 6, X, X) \
+	DES_ROUND(8, 10, X, X) \
+	DES_ROUND(12, 14, X, X) \
+	DES_ROUND(16, 18, X, X) \
+	ldd	[%o0 + 0xf0], %f16; \
+	ldd	[%o0 + 0xf8], %f18; \
+	DES_ROUND(20, 22, X, X) \
+	ldd	[%o0 + 0x100], %f20; \
+	ldd	[%o0 + 0x108], %f22; \
+	DES_ROUND(24, 26, X, X) \
+	ldd	[%o0 + 0x110], %f24; \
+	ldd	[%o0 + 0x118], %f26; \
+	DES_ROUND(28, 30, X, X) \
+	ldd	[%o0 + 0x120], %f28; \
+	ldd	[%o0 + 0x128], %f30; \
+	DES_IIP(X, X) \
+	DES_IP(X, X) \
+	DES_ROUND(32, 34, X, X) \
+	ldd	[%o0 + 0x130], %f0; \
+	ldd	[%o0 + 0x138], %f2; \
+	DES_ROUND(36, 38, X, X) \
+	ldd	[%o0 + 0x140], %f4; \
+	ldd	[%o0 + 0x148], %f6; \
+	DES_ROUND(40, 42, X, X) \
+	ldd	[%o0 + 0x150], %f8; \
+	ldd	[%o0 + 0x158], %f10; \
+	DES_ROUND(44, 46, X, X) \
+	ldd	[%o0 + 0x160], %f12; \
+	ldd	[%o0 + 0x168], %f14; \
+	DES_ROUND(48, 50, X, X) \
+	DES_ROUND(52, 54, X, X) \
+	DES_ROUND(56, 58, X, X) \
+	DES_ROUND(16, 18, X, X) \
+	ldd	[%o0 + 0x170], %f16; \
+	ldd	[%o0 + 0x178], %f18; \
+	DES_IIP(X, X) \
+	DES_IP(X, X) \
+	DES_ROUND(20, 22, X, X) \
+	ldd	[%o0 + 0x50], %f20; \
+	ldd	[%o0 + 0x58], %f22; \
+	DES_ROUND(24, 26, X, X) \
+	ldd	[%o0 + 0x60], %f24; \
+	ldd	[%o0 + 0x68], %f26; \
+	DES_ROUND(28, 30, X, X) \
+	ldd	[%o0 + 0x70], %f28; \
+	ldd	[%o0 + 0x78], %f30; \
+	DES_ROUND(0, 2, X, X) \
+	ldd	[%o0 + 0x00], %f0; \
+	ldd	[%o0 + 0x08], %f2; \
+	DES_ROUND(4, 6, X, X) \
+	ldd	[%o0 + 0x10], %f4; \
+	ldd	[%o0 + 0x18], %f6; \
+	DES_ROUND(8, 10, X, X) \
+	ldd	[%o0 + 0x20], %f8; \
+	ldd	[%o0 + 0x28], %f10; \
+	DES_ROUND(12, 14, X, X) \
+	ldd	[%o0 + 0x30], %f12; \
+	ldd	[%o0 + 0x38], %f14; \
+	DES_ROUND(16, 18, X, X) \
+	ldd	[%o0 + 0x40], %f16; \
+	ldd	[%o0 + 0x48], %f18; \
+	DES_IIP(X, X)
+
+	.align	32
+ENTRY(des3_ede_sparc64_ecb_crypt)
+	/* %o0=key, %o1=input, %o2=output, %o3=len */
+1:	ldd	[%o1 + 0x00], %f60
+	DES3_LOOP_BODY(60)
+	std	%f60, [%o2 + 0x00]
+	subcc	%o3, 0x08, %o3
+	bne,pt	%icc, 1b
+	 add	%o2, 0x08, %o2
+	retl
+	 nop
+ENDPROC(des3_ede_sparc64_ecb_crypt)
+
+	.align	32
+ENTRY(des3_ede_sparc64_cbc_encrypt)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldd	[%o4 + 0x00], %f60
+1:	ldd	[%o1 + 0x00], %f62
+	fxor	%f60, %f62, %f60
+	DES3_LOOP_BODY(60)
+	std	%f60, [%o2 + 0x00]
+	add	%o1, 0x08, %o1
+	subcc	%o3, 0x08, %o3
+	bne,pt	%icc, 1b
+	 add	%o2, 0x08, %o2
+	retl
+	 std	%f60, [%o4 + 0x00]
+ENDPROC(des3_ede_sparc64_cbc_encrypt)
+
+	.align	32
+ENTRY(des3_ede_sparc64_cbc_decrypt)
+	/* %o0=key, %o1=input, %o2=output, %o3=len, %o4=IV */
+	ldd	[%o4 + 0x00], %f62
+1:	ldx	[%o1 + 0x00], %g1
+	MOVXTOD_G1_F60
+	DES3_LOOP_BODY(60)
+	fxor	%f62, %f60, %f60
+	MOVXTOD_G1_F62
+	std	%f60, [%o2 + 0x00]
+	add	%o1, 0x08, %o1
+	subcc	%o3, 0x08, %o3
+	bne,pt	%icc, 1b
+	 add	%o2, 0x08, %o2
+	retl
+	 stx	%g1, [%o4 + 0x00]
+ENDPROC(des3_ede_sparc64_cbc_decrypt)
diff --git a/arch/sparc/crypto/des_glue.c b/arch/sparc/crypto/des_glue.c
new file mode 100644
index 000000000000..c4940c2d3073
--- /dev/null
+++ b/arch/sparc/crypto/des_glue.c
@@ -0,0 +1,529 @@
+/* Glue code for DES encryption optimized for sparc64 crypto opcodes.
+ *
+ * Copyright (C) 2012 David S. Miller <davem@davemloft.net>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <crypto/algapi.h>
+#include <crypto/des.h>
+
+#include <asm/fpumacro.h>
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+struct des_sparc64_ctx {
+	u64 encrypt_expkey[DES_EXPKEY_WORDS / 2];
+	u64 decrypt_expkey[DES_EXPKEY_WORDS / 2];
+};
+
+struct des3_ede_sparc64_ctx {
+	u64 encrypt_expkey[DES3_EDE_EXPKEY_WORDS / 2];
+	u64 decrypt_expkey[DES3_EDE_EXPKEY_WORDS / 2];
+};
+
+static void encrypt_to_decrypt(u64 *d, const u64 *e)
+{
+	const u64 *s = e + (DES_EXPKEY_WORDS / 2) - 1;
+	int i;
+
+	for (i = 0; i < DES_EXPKEY_WORDS / 2; i++)
+		*d++ = *s--;
+}
+
+extern void des_sparc64_key_expand(const u32 *input_key, u64 *key);
+
+static int des_set_key(struct crypto_tfm *tfm, const u8 *key,
+		       unsigned int keylen)
+{
+	struct des_sparc64_ctx *dctx = crypto_tfm_ctx(tfm);
+	u32 *flags = &tfm->crt_flags;
+	u32 tmp[DES_EXPKEY_WORDS];
+	int ret;
+
+	/* Even though we have special instructions for key expansion,
+	 * we call des_ekey() so that we don't have to write our own
+	 * weak key detection code.
+	 */
+	ret = des_ekey(tmp, key);
+	if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+		return -EINVAL;
+	}
+
+	des_sparc64_key_expand((const u32 *) key, &dctx->encrypt_expkey[0]);
+	encrypt_to_decrypt(&dctx->decrypt_expkey[0], &dctx->encrypt_expkey[0]);
+
+	return 0;
+}
+
+extern void des_sparc64_crypt(const u64 *key, const u64 *input,
+			      u64 *output);
+
+static void des_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct des_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+	const u64 *K = ctx->encrypt_expkey;
+
+	des_sparc64_crypt(K, (const u64 *) src, (u64 *) dst);
+}
+
+static void des_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct des_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+	const u64 *K = ctx->decrypt_expkey;
+
+	des_sparc64_crypt(K, (const u64 *) src, (u64 *) dst);
+}
+
+extern void des_sparc64_load_keys(const u64 *key);
+
+extern void des_sparc64_ecb_crypt(const u64 *input, u64 *output,
+				  unsigned int len);
+
+#define DES_BLOCK_MASK	(~(DES_BLOCK_SIZE - 1))
+
+static int __ecb_crypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes, bool encrypt)
+{
+	struct des_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	if (encrypt)
+		des_sparc64_load_keys(&ctx->encrypt_expkey[0]);
+	else
+		des_sparc64_load_keys(&ctx->decrypt_expkey[0]);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & DES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			des_sparc64_ecb_crypt((const u64 *)walk.src.virt.addr,
+					      (u64 *) walk.dst.virt.addr,
+					      block_len);
+		}
+		nbytes &= DES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int ecb_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return __ecb_crypt(desc, dst, src, nbytes, true);
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return __ecb_crypt(desc, dst, src, nbytes, false);
+}
+
+extern void des_sparc64_cbc_encrypt(const u64 *input, u64 *output,
+				    unsigned int len, u64 *iv);
+
+static int cbc_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct des_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	des_sparc64_load_keys(&ctx->encrypt_expkey[0]);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & DES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			des_sparc64_cbc_encrypt((const u64 *)walk.src.virt.addr,
+						(u64 *) walk.dst.virt.addr,
+						block_len, (u64 *) walk.iv);
+		}
+		nbytes &= DES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+extern void des_sparc64_cbc_decrypt(const u64 *input, u64 *output,
+				    unsigned int len, u64 *iv);
+
+static int cbc_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct des_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	des_sparc64_load_keys(&ctx->decrypt_expkey[0]);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & DES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			des_sparc64_cbc_decrypt((const u64 *)walk.src.virt.addr,
+						(u64 *) walk.dst.virt.addr,
+						block_len, (u64 *) walk.iv);
+		}
+		nbytes &= DES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int des3_ede_set_key(struct crypto_tfm *tfm, const u8 *key,
+			    unsigned int keylen)
+{
+	struct des3_ede_sparc64_ctx *dctx = crypto_tfm_ctx(tfm);
+	const u32 *K = (const u32 *)key;
+	u32 *flags = &tfm->crt_flags;
+	u64 k1[DES_EXPKEY_WORDS / 2];
+	u64 k2[DES_EXPKEY_WORDS / 2];
+	u64 k3[DES_EXPKEY_WORDS / 2];
+
+	if (unlikely(!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
+		     !((K[2] ^ K[4]) | (K[3] ^ K[5]))) &&
+		     (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+		return -EINVAL;
+	}
+
+	des_sparc64_key_expand((const u32 *)key, k1);
+	key += DES_KEY_SIZE;
+	des_sparc64_key_expand((const u32 *)key, k2);
+	key += DES_KEY_SIZE;
+	des_sparc64_key_expand((const u32 *)key, k3);
+
+	memcpy(&dctx->encrypt_expkey[0], &k1[0], sizeof(k1));
+	encrypt_to_decrypt(&dctx->encrypt_expkey[DES_EXPKEY_WORDS / 2], &k2[0]);
+	memcpy(&dctx->encrypt_expkey[(DES_EXPKEY_WORDS / 2) * 2],
+	       &k3[0], sizeof(k3));
+
+	encrypt_to_decrypt(&dctx->decrypt_expkey[0], &k3[0]);
+	memcpy(&dctx->decrypt_expkey[DES_EXPKEY_WORDS / 2],
+	       &k2[0], sizeof(k2));
+	encrypt_to_decrypt(&dctx->decrypt_expkey[(DES_EXPKEY_WORDS / 2) * 2],
+			   &k1[0]);
+
+	return 0;
+}
+
+extern void des3_ede_sparc64_crypt(const u64 *key, const u64 *input,
+				   u64 *output);
+
+static void des3_ede_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct des3_ede_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+	const u64 *K = ctx->encrypt_expkey;
+
+	des3_ede_sparc64_crypt(K, (const u64 *) src, (u64 *) dst);
+}
+
+static void des3_ede_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct des3_ede_sparc64_ctx *ctx = crypto_tfm_ctx(tfm);
+	const u64 *K = ctx->decrypt_expkey;
+
+	des3_ede_sparc64_crypt(K, (const u64 *) src, (u64 *) dst);
+}
+
+extern void des3_ede_sparc64_load_keys(const u64 *key);
+
+extern void des3_ede_sparc64_ecb_crypt(const u64 *expkey, const u64 *input,
+				       u64 *output, unsigned int len);
+
+static int __ecb3_crypt(struct blkcipher_desc *desc,
+			struct scatterlist *dst, struct scatterlist *src,
+			unsigned int nbytes, bool encrypt)
+{
+	struct des3_ede_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	const u64 *K;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	if (encrypt)
+		K = &ctx->encrypt_expkey[0];
+	else
+		K = &ctx->decrypt_expkey[0];
+	des3_ede_sparc64_load_keys(K);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & DES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			const u64 *src64 = (const u64 *)walk.src.virt.addr;
+			des3_ede_sparc64_ecb_crypt(K, src64,
+						   (u64 *) walk.dst.virt.addr,
+						   block_len);
+		}
+		nbytes &= DES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static int ecb3_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return __ecb3_crypt(desc, dst, src, nbytes, true);
+}
+
+static int ecb3_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	return __ecb3_crypt(desc, dst, src, nbytes, false);
+}
+
+extern void des3_ede_sparc64_cbc_encrypt(const u64 *expkey, const u64 *input,
+					 u64 *output, unsigned int len,
+					 u64 *iv);
+
+static int cbc3_encrypt(struct blkcipher_desc *desc,
+			struct scatterlist *dst, struct scatterlist *src,
+			unsigned int nbytes)
+{
+	struct des3_ede_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	const u64 *K;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	K = &ctx->encrypt_expkey[0];
+	des3_ede_sparc64_load_keys(K);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & DES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			const u64 *src64 = (const u64 *)walk.src.virt.addr;
+			des3_ede_sparc64_cbc_encrypt(K, src64,
+						     (u64 *) walk.dst.virt.addr,
+						     block_len,
+						     (u64 *) walk.iv);
+		}
+		nbytes &= DES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+extern void des3_ede_sparc64_cbc_decrypt(const u64 *expkey, const u64 *input,
+					 u64 *output, unsigned int len,
+					 u64 *iv);
+
+static int cbc3_decrypt(struct blkcipher_desc *desc,
+			struct scatterlist *dst, struct scatterlist *src,
+			unsigned int nbytes)
+{
+	struct des3_ede_sparc64_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct blkcipher_walk walk;
+	const u64 *K;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	K = &ctx->decrypt_expkey[0];
+	des3_ede_sparc64_load_keys(K);
+	while ((nbytes = walk.nbytes)) {
+		unsigned int block_len = nbytes & DES_BLOCK_MASK;
+
+		if (likely(block_len)) {
+			const u64 *src64 = (const u64 *)walk.src.virt.addr;
+			des3_ede_sparc64_cbc_decrypt(K, src64,
+						     (u64 *) walk.dst.virt.addr,
+						     block_len,
+						     (u64 *) walk.iv);
+		}
+		nbytes &= DES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	fprs_write(0);
+	return err;
+}
+
+static struct crypto_alg algs[] = { {
+	.cra_name		= "des",
+	.cra_driver_name	= "des-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= DES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct des_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_module		= THIS_MODULE,
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= DES_KEY_SIZE,
+			.cia_max_keysize	= DES_KEY_SIZE,
+			.cia_setkey		= des_set_key,
+			.cia_encrypt		= des_encrypt,
+			.cia_decrypt		= des_decrypt
+		}
+	}
+}, {
+	.cra_name		= "ecb(des)",
+	.cra_driver_name	= "ecb-des-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= DES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct des_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= DES_KEY_SIZE,
+			.max_keysize	= DES_KEY_SIZE,
+			.setkey		= des_set_key,
+			.encrypt	= ecb_encrypt,
+			.decrypt	= ecb_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "cbc(des)",
+	.cra_driver_name	= "cbc-des-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= DES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct des_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= DES_KEY_SIZE,
+			.max_keysize	= DES_KEY_SIZE,
+			.setkey		= des_set_key,
+			.encrypt	= cbc_encrypt,
+			.decrypt	= cbc_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "des3_ede",
+	.cra_driver_name	= "des3_ede-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= DES3_EDE_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct des3_ede_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_module		= THIS_MODULE,
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= DES3_EDE_KEY_SIZE,
+			.cia_max_keysize	= DES3_EDE_KEY_SIZE,
+			.cia_setkey		= des3_ede_set_key,
+			.cia_encrypt		= des3_ede_encrypt,
+			.cia_decrypt		= des3_ede_decrypt
+		}
+	}
+}, {
+	.cra_name		= "ecb(des3_ede)",
+	.cra_driver_name	= "ecb-des3_ede-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= DES3_EDE_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct des3_ede_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= DES3_EDE_KEY_SIZE,
+			.max_keysize	= DES3_EDE_KEY_SIZE,
+			.setkey		= des3_ede_set_key,
+			.encrypt	= ecb3_encrypt,
+			.decrypt	= ecb3_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "cbc(des3_ede)",
+	.cra_driver_name	= "cbc-des3_ede-sparc64",
+	.cra_priority		= SPARC_CR_OPCODE_PRIORITY,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= DES3_EDE_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct des3_ede_sparc64_ctx),
+	.cra_alignmask		= 7,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= DES3_EDE_KEY_SIZE,
+			.max_keysize	= DES3_EDE_KEY_SIZE,
+			.setkey		= des3_ede_set_key,
+			.encrypt	= cbc3_encrypt,
+			.decrypt	= cbc3_decrypt,
+		},
+	},
+} };
+
+static bool __init sparc64_has_des_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_DES))
+		return false;
+
+	return true;
+}
+
+static int __init des_sparc64_mod_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(algs); i++)
+		INIT_LIST_HEAD(&algs[i].cra_list);
+
+	if (sparc64_has_des_opcode()) {
+		pr_info("Using sparc64 des opcodes optimized DES implementation\n");
+		return crypto_register_algs(algs, ARRAY_SIZE(algs));
+	}
+	pr_info("sparc64 des opcodes not available.\n");
+	return -ENODEV;
+}
+
+static void __exit des_sparc64_mod_fini(void)
+{
+	crypto_unregister_algs(algs, ARRAY_SIZE(algs));
+}
+
+module_init(des_sparc64_mod_init);
+module_exit(des_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms, sparc64 des opcode accelerated");
+
+MODULE_ALIAS("des");
diff --git a/arch/sparc/crypto/md5_asm.S b/arch/sparc/crypto/md5_asm.S
new file mode 100644
index 000000000000..3150404e602e
--- /dev/null
+++ b/arch/sparc/crypto/md5_asm.S
@@ -0,0 +1,70 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+ENTRY(md5_sparc64_transform)
+	/* %o0 = digest, %o1 = data, %o2 = rounds */
+	VISEntryHalf
+	ld	[%o0 + 0x00], %f0
+	ld	[%o0 + 0x04], %f1
+	andcc	%o1, 0x7, %g0
+	ld	[%o0 + 0x08], %f2
+	bne,pn	%xcc, 10f
+	 ld	[%o0 + 0x0c], %f3
+
+1:
+	ldd	[%o1 + 0x00], %f8
+	ldd	[%o1 + 0x08], %f10
+	ldd	[%o1 + 0x10], %f12
+	ldd	[%o1 + 0x18], %f14
+	ldd	[%o1 + 0x20], %f16
+	ldd	[%o1 + 0x28], %f18
+	ldd	[%o1 + 0x30], %f20
+	ldd	[%o1 + 0x38], %f22
+
+	MD5
+
+	subcc	%o2, 1, %o2
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x40, %o1
+
+5:
+	st	%f0, [%o0 + 0x00]
+	st	%f1, [%o0 + 0x04]
+	st	%f2, [%o0 + 0x08]
+	st	%f3, [%o0 + 0x0c]
+	retl
+	 VISExitHalf
+10:
+	alignaddr %o1, %g0, %o1
+
+	ldd	[%o1 + 0x00], %f10
+1:
+	ldd	[%o1 + 0x08], %f12
+	ldd	[%o1 + 0x10], %f14
+	ldd	[%o1 + 0x18], %f16
+	ldd	[%o1 + 0x20], %f18
+	ldd	[%o1 + 0x28], %f20
+	ldd	[%o1 + 0x30], %f22
+	ldd	[%o1 + 0x38], %f24
+	ldd	[%o1 + 0x40], %f26
+
+	faligndata %f10, %f12, %f8
+	faligndata %f12, %f14, %f10
+	faligndata %f14, %f16, %f12
+	faligndata %f16, %f18, %f14
+	faligndata %f18, %f20, %f16
+	faligndata %f20, %f22, %f18
+	faligndata %f22, %f24, %f20
+	faligndata %f24, %f26, %f22
+
+	MD5
+
+	subcc	%o2, 1, %o2
+	fsrc2	%f26, %f10
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x40, %o1
+
+	ba,a,pt	%xcc, 5b
+ENDPROC(md5_sparc64_transform)
diff --git a/arch/sparc/crypto/md5_glue.c b/arch/sparc/crypto/md5_glue.c
new file mode 100644
index 000000000000..603d723038ce
--- /dev/null
+++ b/arch/sparc/crypto/md5_glue.c
@@ -0,0 +1,188 @@
+/* Glue code for MD5 hashing optimized for sparc64 crypto opcodes.
+ *
+ * This is based largely upon arch/x86/crypto/sha1_ssse3_glue.c
+ * and crypto/md5.c which are:
+ *
+ * Copyright (c) Alan Smithee.
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
+ * Copyright (c) Mathias Krause <minipli@googlemail.com>
+ * Copyright (c) Cryptoapi developers.
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/md5.h>
+
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+asmlinkage void md5_sparc64_transform(u32 *digest, const char *data,
+				      unsigned int rounds);
+
+static int md5_sparc64_init(struct shash_desc *desc)
+{
+	struct md5_state *mctx = shash_desc_ctx(desc);
+
+	mctx->hash[0] = cpu_to_le32(0x67452301);
+	mctx->hash[1] = cpu_to_le32(0xefcdab89);
+	mctx->hash[2] = cpu_to_le32(0x98badcfe);
+	mctx->hash[3] = cpu_to_le32(0x10325476);
+	mctx->byte_count = 0;
+
+	return 0;
+}
+
+static void __md5_sparc64_update(struct md5_state *sctx, const u8 *data,
+				 unsigned int len, unsigned int partial)
+{
+	unsigned int done = 0;
+
+	sctx->byte_count += len;
+	if (partial) {
+		done = MD5_HMAC_BLOCK_SIZE - partial;
+		memcpy((u8 *)sctx->block + partial, data, done);
+		md5_sparc64_transform(sctx->hash, (u8 *)sctx->block, 1);
+	}
+	if (len - done >= MD5_HMAC_BLOCK_SIZE) {
+		const unsigned int rounds = (len - done) / MD5_HMAC_BLOCK_SIZE;
+
+		md5_sparc64_transform(sctx->hash, data + done, rounds);
+		done += rounds * MD5_HMAC_BLOCK_SIZE;
+	}
+
+	memcpy(sctx->block, data + done, len - done);
+}
+
+static int md5_sparc64_update(struct shash_desc *desc, const u8 *data,
+			      unsigned int len)
+{
+	struct md5_state *sctx = shash_desc_ctx(desc);
+	unsigned int partial = sctx->byte_count % MD5_HMAC_BLOCK_SIZE;
+
+	/* Handle the fast case right here */
+	if (partial + len < MD5_HMAC_BLOCK_SIZE) {
+		sctx->byte_count += len;
+		memcpy((u8 *)sctx->block + partial, data, len);
+	} else
+		__md5_sparc64_update(sctx, data, len, partial);
+
+	return 0;
+}
+
+/* Add padding and return the message digest. */
+static int md5_sparc64_final(struct shash_desc *desc, u8 *out)
+{
+	struct md5_state *sctx = shash_desc_ctx(desc);
+	unsigned int i, index, padlen;
+	u32 *dst = (u32 *)out;
+	__le64 bits;
+	static const u8 padding[MD5_HMAC_BLOCK_SIZE] = { 0x80, };
+
+	bits = cpu_to_le64(sctx->byte_count << 3);
+
+	/* Pad out to 56 mod 64 and append length */
+	index = sctx->byte_count % MD5_HMAC_BLOCK_SIZE;
+	padlen = (index < 56) ? (56 - index) : ((MD5_HMAC_BLOCK_SIZE+56) - index);
+
+	/* We need to fill a whole block for __md5_sparc64_update() */
+	if (padlen <= 56) {
+		sctx->byte_count += padlen;
+		memcpy((u8 *)sctx->block + index, padding, padlen);
+	} else {
+		__md5_sparc64_update(sctx, padding, padlen, index);
+	}
+	__md5_sparc64_update(sctx, (const u8 *)&bits, sizeof(bits), 56);
+
+	/* Store state in digest */
+	for (i = 0; i < MD5_HASH_WORDS; i++)
+		dst[i] = sctx->hash[i];
+
+	/* Wipe context */
+	memset(sctx, 0, sizeof(*sctx));
+
+	return 0;
+}
+
+static int md5_sparc64_export(struct shash_desc *desc, void *out)
+{
+	struct md5_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(out, sctx, sizeof(*sctx));
+
+	return 0;
+}
+
+static int md5_sparc64_import(struct shash_desc *desc, const void *in)
+{
+	struct md5_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(sctx, in, sizeof(*sctx));
+
+	return 0;
+}
+
+static struct shash_alg alg = {
+	.digestsize	=	MD5_DIGEST_SIZE,
+	.init		=	md5_sparc64_init,
+	.update		=	md5_sparc64_update,
+	.final		=	md5_sparc64_final,
+	.export		=	md5_sparc64_export,
+	.import		=	md5_sparc64_import,
+	.descsize	=	sizeof(struct md5_state),
+	.statesize	=	sizeof(struct md5_state),
+	.base		=	{
+		.cra_name	=	"md5",
+		.cra_driver_name=	"md5-sparc64",
+		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static bool __init sparc64_has_md5_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_MD5))
+		return false;
+
+	return true;
+}
+
+static int __init md5_sparc64_mod_init(void)
+{
+	if (sparc64_has_md5_opcode()) {
+		pr_info("Using sparc64 md5 opcode optimized MD5 implementation\n");
+		return crypto_register_shash(&alg);
+	}
+	pr_info("sparc64 md5 opcode not available.\n");
+	return -ENODEV;
+}
+
+static void __exit md5_sparc64_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+module_init(md5_sparc64_mod_init);
+module_exit(md5_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, sparc64 md5 opcode accelerated");
+
+MODULE_ALIAS("md5");
diff --git a/arch/sparc/crypto/opcodes.h b/arch/sparc/crypto/opcodes.h
new file mode 100644
index 000000000000..19cbaea6976f
--- /dev/null
+++ b/arch/sparc/crypto/opcodes.h
@@ -0,0 +1,99 @@
+#ifndef _OPCODES_H
+#define _OPCODES_H
+
+#define SPARC_CR_OPCODE_PRIORITY	300
+
+#define F3F(x,y,z)	(((x)<<30)|((y)<<19)|((z)<<5))
+
+#define FPD_ENCODE(x)	(((x) >> 5) | ((x) & ~(0x20)))
+
+#define RS1(x)		(FPD_ENCODE(x) << 14)
+#define RS2(x)		(FPD_ENCODE(x) <<  0)
+#define RS3(x)		(FPD_ENCODE(x) <<  9)
+#define RD(x)		(FPD_ENCODE(x) << 25)
+#define IMM5_0(x)	((x)           <<  0)
+#define IMM5_9(x)	((x)           <<  9)
+
+#define CRC32C(a,b,c)	\
+	.word		(F3F(2,0x36,0x147)|RS1(a)|RS2(b)|RD(c));
+
+#define MD5		\
+	.word	0x81b02800;
+#define SHA1		\
+	.word	0x81b02820;
+#define SHA256		\
+	.word	0x81b02840;
+#define SHA512		\
+	.word	0x81b02860;
+
+#define AES_EROUND01(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 0)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_EROUND23(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 1)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_DROUND01(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 2)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_DROUND23(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 3)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_EROUND01_L(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 4)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_EROUND23_L(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 5)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_DROUND01_L(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 6)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_DROUND23_L(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 7)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define AES_KEXPAND1(a,b,c,d)	\
+	.word	(F3F(2, 0x19, 8)|RS1(a)|RS2(b)|IMM5_9(c)|RD(d));
+#define AES_KEXPAND0(a,b,c)	\
+	.word	(F3F(2, 0x36, 0x130)|RS1(a)|RS2(b)|RD(c));
+#define AES_KEXPAND2(a,b,c)	\
+	.word	(F3F(2, 0x36, 0x131)|RS1(a)|RS2(b)|RD(c));
+
+#define DES_IP(a,b)		\
+	.word		(F3F(2, 0x36, 0x134)|RS1(a)|RD(b));
+#define DES_IIP(a,b)		\
+	.word		(F3F(2, 0x36, 0x135)|RS1(a)|RD(b));
+#define DES_KEXPAND(a,b,c)	\
+	.word		(F3F(2, 0x36, 0x136)|RS1(a)|IMM5_0(b)|RD(c));
+#define DES_ROUND(a,b,c,d)	\
+	.word		(F3F(2, 0x19, 0x009)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+
+#define CAMELLIA_F(a,b,c,d)		\
+	.word		(F3F(2, 0x19, 0x00c)|RS1(a)|RS2(b)|RS3(c)|RD(d));
+#define CAMELLIA_FL(a,b,c)		\
+	.word		(F3F(2, 0x36, 0x13c)|RS1(a)|RS2(b)|RD(c));
+#define CAMELLIA_FLI(a,b,c)		\
+	.word		(F3F(2, 0x36, 0x13d)|RS1(a)|RS2(b)|RD(c));
+
+#define MOVDTOX_F0_O4		\
+	.word	0x99b02200
+#define MOVDTOX_F2_O5		\
+	.word	0x9bb02202
+#define MOVXTOD_G1_F60 		\
+	.word	0xbbb02301
+#define MOVXTOD_G1_F62 		\
+	.word	0xbfb02301
+#define MOVXTOD_G3_F4		\
+	.word	0x89b02303;
+#define MOVXTOD_G7_F6		\
+	.word	0x8db02307;
+#define MOVXTOD_G3_F0		\
+	.word	0x81b02303;
+#define MOVXTOD_G7_F2		\
+	.word	0x85b02307;
+#define MOVXTOD_O0_F0		\
+	.word	0x81b02308;
+#define MOVXTOD_O5_F0		\
+	.word	0x81b0230d;
+#define MOVXTOD_O5_F2		\
+	.word	0x85b0230d;
+#define MOVXTOD_O5_F4		\
+	.word	0x89b0230d;
+#define MOVXTOD_O5_F6		\
+	.word	0x8db0230d;
+#define MOVXTOD_G3_F60		\
+	.word	0xbbb02303;
+#define MOVXTOD_G7_F62		\
+	.word	0xbfb02307;
+
+#endif /* _OPCODES_H */
diff --git a/arch/sparc/crypto/sha1_asm.S b/arch/sparc/crypto/sha1_asm.S
new file mode 100644
index 000000000000..219d10c5ae0e
--- /dev/null
+++ b/arch/sparc/crypto/sha1_asm.S
@@ -0,0 +1,72 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+ENTRY(sha1_sparc64_transform)
+	/* %o0 = digest, %o1 = data, %o2 = rounds */
+	VISEntryHalf
+	ld	[%o0 + 0x00], %f0
+	ld	[%o0 + 0x04], %f1
+	ld	[%o0 + 0x08], %f2
+	andcc	%o1, 0x7, %g0
+	ld	[%o0 + 0x0c], %f3
+	bne,pn	%xcc, 10f
+	 ld	[%o0 + 0x10], %f4
+
+1:
+	ldd	[%o1 + 0x00], %f8
+	ldd	[%o1 + 0x08], %f10
+	ldd	[%o1 + 0x10], %f12
+	ldd	[%o1 + 0x18], %f14
+	ldd	[%o1 + 0x20], %f16
+	ldd	[%o1 + 0x28], %f18
+	ldd	[%o1 + 0x30], %f20
+	ldd	[%o1 + 0x38], %f22
+
+	SHA1
+
+	subcc	%o2, 1, %o2
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x40, %o1
+
+5:
+	st	%f0, [%o0 + 0x00]
+	st	%f1, [%o0 + 0x04]
+	st	%f2, [%o0 + 0x08]
+	st	%f3, [%o0 + 0x0c]
+	st	%f4, [%o0 + 0x10]
+	retl
+	 VISExitHalf
+10:
+	alignaddr %o1, %g0, %o1
+
+	ldd	[%o1 + 0x00], %f10
+1:
+	ldd	[%o1 + 0x08], %f12
+	ldd	[%o1 + 0x10], %f14
+	ldd	[%o1 + 0x18], %f16
+	ldd	[%o1 + 0x20], %f18
+	ldd	[%o1 + 0x28], %f20
+	ldd	[%o1 + 0x30], %f22
+	ldd	[%o1 + 0x38], %f24
+	ldd	[%o1 + 0x40], %f26
+
+	faligndata %f10, %f12, %f8
+	faligndata %f12, %f14, %f10
+	faligndata %f14, %f16, %f12
+	faligndata %f16, %f18, %f14
+	faligndata %f18, %f20, %f16
+	faligndata %f20, %f22, %f18
+	faligndata %f22, %f24, %f20
+	faligndata %f24, %f26, %f22
+
+	SHA1
+
+	subcc	%o2, 1, %o2
+	fsrc2	%f26, %f10
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x40, %o1
+
+	ba,a,pt	%xcc, 5b
+ENDPROC(sha1_sparc64_transform)
diff --git a/arch/sparc/crypto/sha1_glue.c b/arch/sparc/crypto/sha1_glue.c
new file mode 100644
index 000000000000..2bbb20bee9f1
--- /dev/null
+++ b/arch/sparc/crypto/sha1_glue.c
@@ -0,0 +1,183 @@
+/* Glue code for SHA1 hashing optimized for sparc64 crypto opcodes.
+ *
+ * This is based largely upon arch/x86/crypto/sha1_ssse3_glue.c
+ *
+ * Copyright (c) Alan Smithee.
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
+ * Copyright (c) Mathias Krause <minipli@googlemail.com>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/sha.h>
+
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+asmlinkage void sha1_sparc64_transform(u32 *digest, const char *data,
+				       unsigned int rounds);
+
+static int sha1_sparc64_init(struct shash_desc *desc)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+
+	*sctx = (struct sha1_state){
+		.state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
+	};
+
+	return 0;
+}
+
+static void __sha1_sparc64_update(struct sha1_state *sctx, const u8 *data,
+				  unsigned int len, unsigned int partial)
+{
+	unsigned int done = 0;
+
+	sctx->count += len;
+	if (partial) {
+		done = SHA1_BLOCK_SIZE - partial;
+		memcpy(sctx->buffer + partial, data, done);
+		sha1_sparc64_transform(sctx->state, sctx->buffer, 1);
+	}
+	if (len - done >= SHA1_BLOCK_SIZE) {
+		const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE;
+
+		sha1_sparc64_transform(sctx->state, data + done, rounds);
+		done += rounds * SHA1_BLOCK_SIZE;
+	}
+
+	memcpy(sctx->buffer, data + done, len - done);
+}
+
+static int sha1_sparc64_update(struct shash_desc *desc, const u8 *data,
+			       unsigned int len)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+	unsigned int partial = sctx->count % SHA1_BLOCK_SIZE;
+
+	/* Handle the fast case right here */
+	if (partial + len < SHA1_BLOCK_SIZE) {
+		sctx->count += len;
+		memcpy(sctx->buffer + partial, data, len);
+	} else
+		__sha1_sparc64_update(sctx, data, len, partial);
+
+	return 0;
+}
+
+/* Add padding and return the message digest. */
+static int sha1_sparc64_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+	unsigned int i, index, padlen;
+	__be32 *dst = (__be32 *)out;
+	__be64 bits;
+	static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, };
+
+	bits = cpu_to_be64(sctx->count << 3);
+
+	/* Pad out to 56 mod 64 and append length */
+	index = sctx->count % SHA1_BLOCK_SIZE;
+	padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index);
+
+	/* We need to fill a whole block for __sha1_sparc64_update() */
+	if (padlen <= 56) {
+		sctx->count += padlen;
+		memcpy(sctx->buffer + index, padding, padlen);
+	} else {
+		__sha1_sparc64_update(sctx, padding, padlen, index);
+	}
+	__sha1_sparc64_update(sctx, (const u8 *)&bits, sizeof(bits), 56);
+
+	/* Store state in digest */
+	for (i = 0; i < 5; i++)
+		dst[i] = cpu_to_be32(sctx->state[i]);
+
+	/* Wipe context */
+	memset(sctx, 0, sizeof(*sctx));
+
+	return 0;
+}
+
+static int sha1_sparc64_export(struct shash_desc *desc, void *out)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(out, sctx, sizeof(*sctx));
+
+	return 0;
+}
+
+static int sha1_sparc64_import(struct shash_desc *desc, const void *in)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(sctx, in, sizeof(*sctx));
+
+	return 0;
+}
+
+static struct shash_alg alg = {
+	.digestsize	=	SHA1_DIGEST_SIZE,
+	.init		=	sha1_sparc64_init,
+	.update		=	sha1_sparc64_update,
+	.final		=	sha1_sparc64_final,
+	.export		=	sha1_sparc64_export,
+	.import		=	sha1_sparc64_import,
+	.descsize	=	sizeof(struct sha1_state),
+	.statesize	=	sizeof(struct sha1_state),
+	.base		=	{
+		.cra_name	=	"sha1",
+		.cra_driver_name=	"sha1-sparc64",
+		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA1_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static bool __init sparc64_has_sha1_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_SHA1))
+		return false;
+
+	return true;
+}
+
+static int __init sha1_sparc64_mod_init(void)
+{
+	if (sparc64_has_sha1_opcode()) {
+		pr_info("Using sparc64 sha1 opcode optimized SHA-1 implementation\n");
+		return crypto_register_shash(&alg);
+	}
+	pr_info("sparc64 sha1 opcode not available.\n");
+	return -ENODEV;
+}
+
+static void __exit sha1_sparc64_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+module_init(sha1_sparc64_mod_init);
+module_exit(sha1_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, sparc64 sha1 opcode accelerated");
+
+MODULE_ALIAS("sha1");
diff --git a/arch/sparc/crypto/sha256_asm.S b/arch/sparc/crypto/sha256_asm.S
new file mode 100644
index 000000000000..b5f3d5826eb4
--- /dev/null
+++ b/arch/sparc/crypto/sha256_asm.S
@@ -0,0 +1,78 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+ENTRY(sha256_sparc64_transform)
+	/* %o0 = digest, %o1 = data, %o2 = rounds */
+	VISEntryHalf
+	ld	[%o0 + 0x00], %f0
+	ld	[%o0 + 0x04], %f1
+	ld	[%o0 + 0x08], %f2
+	ld	[%o0 + 0x0c], %f3
+	ld	[%o0 + 0x10], %f4
+	ld	[%o0 + 0x14], %f5
+	andcc	%o1, 0x7, %g0
+	ld	[%o0 + 0x18], %f6
+	bne,pn	%xcc, 10f
+	 ld	[%o0 + 0x1c], %f7
+
+1:
+	ldd	[%o1 + 0x00], %f8
+	ldd	[%o1 + 0x08], %f10
+	ldd	[%o1 + 0x10], %f12
+	ldd	[%o1 + 0x18], %f14
+	ldd	[%o1 + 0x20], %f16
+	ldd	[%o1 + 0x28], %f18
+	ldd	[%o1 + 0x30], %f20
+	ldd	[%o1 + 0x38], %f22
+
+	SHA256
+
+	subcc	%o2, 1, %o2
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x40, %o1
+
+5:
+	st	%f0, [%o0 + 0x00]
+	st	%f1, [%o0 + 0x04]
+	st	%f2, [%o0 + 0x08]
+	st	%f3, [%o0 + 0x0c]
+	st	%f4, [%o0 + 0x10]
+	st	%f5, [%o0 + 0x14]
+	st	%f6, [%o0 + 0x18]
+	st	%f7, [%o0 + 0x1c]
+	retl
+	 VISExitHalf
+10:
+	alignaddr %o1, %g0, %o1
+
+	ldd	[%o1 + 0x00], %f10
+1:
+	ldd	[%o1 + 0x08], %f12
+	ldd	[%o1 + 0x10], %f14
+	ldd	[%o1 + 0x18], %f16
+	ldd	[%o1 + 0x20], %f18
+	ldd	[%o1 + 0x28], %f20
+	ldd	[%o1 + 0x30], %f22
+	ldd	[%o1 + 0x38], %f24
+	ldd	[%o1 + 0x40], %f26
+
+	faligndata %f10, %f12, %f8
+	faligndata %f12, %f14, %f10
+	faligndata %f14, %f16, %f12
+	faligndata %f16, %f18, %f14
+	faligndata %f18, %f20, %f16
+	faligndata %f20, %f22, %f18
+	faligndata %f22, %f24, %f20
+	faligndata %f24, %f26, %f22
+
+	SHA256
+
+	subcc	%o2, 1, %o2
+	fsrc2	%f26, %f10
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x40, %o1
+
+	ba,a,pt	%xcc, 5b
+ENDPROC(sha256_sparc64_transform)
diff --git a/arch/sparc/crypto/sha256_glue.c b/arch/sparc/crypto/sha256_glue.c
new file mode 100644
index 000000000000..591e656bd891
--- /dev/null
+++ b/arch/sparc/crypto/sha256_glue.c
@@ -0,0 +1,241 @@
+/* Glue code for SHA256 hashing optimized for sparc64 crypto opcodes.
+ *
+ * This is based largely upon crypto/sha256_generic.c
+ *
+ * Copyright (c) Jean-Luc Cooke <jlcooke@certainkey.com>
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * SHA224 Support Copyright 2007 Intel Corporation <jonathan.lynch@intel.com>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/sha.h>
+
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+asmlinkage void sha256_sparc64_transform(u32 *digest, const char *data,
+					 unsigned int rounds);
+
+static int sha224_sparc64_init(struct shash_desc *desc)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	sctx->state[0] = SHA224_H0;
+	sctx->state[1] = SHA224_H1;
+	sctx->state[2] = SHA224_H2;
+	sctx->state[3] = SHA224_H3;
+	sctx->state[4] = SHA224_H4;
+	sctx->state[5] = SHA224_H5;
+	sctx->state[6] = SHA224_H6;
+	sctx->state[7] = SHA224_H7;
+	sctx->count = 0;
+
+	return 0;
+}
+
+static int sha256_sparc64_init(struct shash_desc *desc)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	sctx->state[0] = SHA256_H0;
+	sctx->state[1] = SHA256_H1;
+	sctx->state[2] = SHA256_H2;
+	sctx->state[3] = SHA256_H3;
+	sctx->state[4] = SHA256_H4;
+	sctx->state[5] = SHA256_H5;
+	sctx->state[6] = SHA256_H6;
+	sctx->state[7] = SHA256_H7;
+	sctx->count = 0;
+
+	return 0;
+}
+
+static void __sha256_sparc64_update(struct sha256_state *sctx, const u8 *data,
+				    unsigned int len, unsigned int partial)
+{
+	unsigned int done = 0;
+
+	sctx->count += len;
+	if (partial) {
+		done = SHA256_BLOCK_SIZE - partial;
+		memcpy(sctx->buf + partial, data, done);
+		sha256_sparc64_transform(sctx->state, sctx->buf, 1);
+	}
+	if (len - done >= SHA256_BLOCK_SIZE) {
+		const unsigned int rounds = (len - done) / SHA256_BLOCK_SIZE;
+
+		sha256_sparc64_transform(sctx->state, data + done, rounds);
+		done += rounds * SHA256_BLOCK_SIZE;
+	}
+
+	memcpy(sctx->buf, data + done, len - done);
+}
+
+static int sha256_sparc64_update(struct shash_desc *desc, const u8 *data,
+				 unsigned int len)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	unsigned int partial = sctx->count % SHA256_BLOCK_SIZE;
+
+	/* Handle the fast case right here */
+	if (partial + len < SHA256_BLOCK_SIZE) {
+		sctx->count += len;
+		memcpy(sctx->buf + partial, data, len);
+	} else
+		__sha256_sparc64_update(sctx, data, len, partial);
+
+	return 0;
+}
+
+static int sha256_sparc64_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	unsigned int i, index, padlen;
+	__be32 *dst = (__be32 *)out;
+	__be64 bits;
+	static const u8 padding[SHA256_BLOCK_SIZE] = { 0x80, };
+
+	bits = cpu_to_be64(sctx->count << 3);
+
+	/* Pad out to 56 mod 64 and append length */
+	index = sctx->count % SHA256_BLOCK_SIZE;
+	padlen = (index < 56) ? (56 - index) : ((SHA256_BLOCK_SIZE+56) - index);
+
+	/* We need to fill a whole block for __sha256_sparc64_update() */
+	if (padlen <= 56) {
+		sctx->count += padlen;
+		memcpy(sctx->buf + index, padding, padlen);
+	} else {
+		__sha256_sparc64_update(sctx, padding, padlen, index);
+	}
+	__sha256_sparc64_update(sctx, (const u8 *)&bits, sizeof(bits), 56);
+
+	/* Store state in digest */
+	for (i = 0; i < 8; i++)
+		dst[i] = cpu_to_be32(sctx->state[i]);
+
+	/* Wipe context */
+	memset(sctx, 0, sizeof(*sctx));
+
+	return 0;
+}
+
+static int sha224_sparc64_final(struct shash_desc *desc, u8 *hash)
+{
+	u8 D[SHA256_DIGEST_SIZE];
+
+	sha256_sparc64_final(desc, D);
+
+	memcpy(hash, D, SHA224_DIGEST_SIZE);
+	memset(D, 0, SHA256_DIGEST_SIZE);
+
+	return 0;
+}
+
+static int sha256_sparc64_export(struct shash_desc *desc, void *out)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(out, sctx, sizeof(*sctx));
+	return 0;
+}
+
+static int sha256_sparc64_import(struct shash_desc *desc, const void *in)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(sctx, in, sizeof(*sctx));
+	return 0;
+}
+
+static struct shash_alg sha256 = {
+	.digestsize	=	SHA256_DIGEST_SIZE,
+	.init		=	sha256_sparc64_init,
+	.update		=	sha256_sparc64_update,
+	.final		=	sha256_sparc64_final,
+	.export		=	sha256_sparc64_export,
+	.import		=	sha256_sparc64_import,
+	.descsize	=	sizeof(struct sha256_state),
+	.statesize	=	sizeof(struct sha256_state),
+	.base		=	{
+		.cra_name	=	"sha256",
+		.cra_driver_name=	"sha256-sparc64",
+		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA256_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static struct shash_alg sha224 = {
+	.digestsize	=	SHA224_DIGEST_SIZE,
+	.init		=	sha224_sparc64_init,
+	.update		=	sha256_sparc64_update,
+	.final		=	sha224_sparc64_final,
+	.descsize	=	sizeof(struct sha256_state),
+	.base		=	{
+		.cra_name	=	"sha224",
+		.cra_driver_name=	"sha224-sparc64",
+		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA224_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static bool __init sparc64_has_sha256_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_SHA256))
+		return false;
+
+	return true;
+}
+
+static int __init sha256_sparc64_mod_init(void)
+{
+	if (sparc64_has_sha256_opcode()) {
+		int ret = crypto_register_shash(&sha224);
+		if (ret < 0)
+			return ret;
+
+		ret = crypto_register_shash(&sha256);
+		if (ret < 0) {
+			crypto_unregister_shash(&sha224);
+			return ret;
+		}
+
+		pr_info("Using sparc64 sha256 opcode optimized SHA-256/SHA-224 implementation\n");
+		return 0;
+	}
+	pr_info("sparc64 sha256 opcode not available.\n");
+	return -ENODEV;
+}
+
+static void __exit sha256_sparc64_mod_fini(void)
+{
+	crypto_unregister_shash(&sha224);
+	crypto_unregister_shash(&sha256);
+}
+
+module_init(sha256_sparc64_mod_init);
+module_exit(sha256_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm, sparc64 sha256 opcode accelerated");
+
+MODULE_ALIAS("sha224");
+MODULE_ALIAS("sha256");
diff --git a/arch/sparc/crypto/sha512_asm.S b/arch/sparc/crypto/sha512_asm.S
new file mode 100644
index 000000000000..54bfba713c0e
--- /dev/null
+++ b/arch/sparc/crypto/sha512_asm.S
@@ -0,0 +1,102 @@
+#include <linux/linkage.h>
+#include <asm/visasm.h>
+
+#include "opcodes.h"
+
+ENTRY(sha512_sparc64_transform)
+	/* %o0 = digest, %o1 = data, %o2 = rounds */
+	VISEntry
+	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	andcc	%o1, 0x7, %g0
+	ldd	[%o0 + 0x30], %f12
+	bne,pn	%xcc, 10f
+	 ldd	[%o0 + 0x38], %f14
+
+1:
+	ldd	[%o1 + 0x00], %f16
+	ldd	[%o1 + 0x08], %f18
+	ldd	[%o1 + 0x10], %f20
+	ldd	[%o1 + 0x18], %f22
+	ldd	[%o1 + 0x20], %f24
+	ldd	[%o1 + 0x28], %f26
+	ldd	[%o1 + 0x30], %f28
+	ldd	[%o1 + 0x38], %f30
+	ldd	[%o1 + 0x40], %f32
+	ldd	[%o1 + 0x48], %f34
+	ldd	[%o1 + 0x50], %f36
+	ldd	[%o1 + 0x58], %f38
+	ldd	[%o1 + 0x60], %f40
+	ldd	[%o1 + 0x68], %f42
+	ldd	[%o1 + 0x70], %f44
+	ldd	[%o1 + 0x78], %f46
+
+	SHA512
+
+	subcc	%o2, 1, %o2
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x80, %o1
+
+5:
+	std	%f0, [%o0 + 0x00]
+	std	%f2, [%o0 + 0x08]
+	std	%f4, [%o0 + 0x10]
+	std	%f6, [%o0 + 0x18]
+	std	%f8, [%o0 + 0x20]
+	std	%f10, [%o0 + 0x28]
+	std	%f12, [%o0 + 0x30]
+	std	%f14, [%o0 + 0x38]
+	retl
+	 VISExit
+10:
+	alignaddr %o1, %g0, %o1
+
+	ldd	[%o1 + 0x00], %f18
+1:
+	ldd	[%o1 + 0x08], %f20
+	ldd	[%o1 + 0x10], %f22
+	ldd	[%o1 + 0x18], %f24
+	ldd	[%o1 + 0x20], %f26
+	ldd	[%o1 + 0x28], %f28
+	ldd	[%o1 + 0x30], %f30
+	ldd	[%o1 + 0x38], %f32
+	ldd	[%o1 + 0x40], %f34
+	ldd	[%o1 + 0x48], %f36
+	ldd	[%o1 + 0x50], %f38
+	ldd	[%o1 + 0x58], %f40
+	ldd	[%o1 + 0x60], %f42
+	ldd	[%o1 + 0x68], %f44
+	ldd	[%o1 + 0x70], %f46
+	ldd	[%o1 + 0x78], %f48
+	ldd	[%o1 + 0x80], %f50
+
+	faligndata %f18, %f20, %f16
+	faligndata %f20, %f22, %f18
+	faligndata %f22, %f24, %f20
+	faligndata %f24, %f26, %f22
+	faligndata %f26, %f28, %f24
+	faligndata %f28, %f30, %f26
+	faligndata %f30, %f32, %f28
+	faligndata %f32, %f34, %f30
+	faligndata %f34, %f36, %f32
+	faligndata %f36, %f38, %f34
+	faligndata %f38, %f40, %f36
+	faligndata %f40, %f42, %f38
+	faligndata %f42, %f44, %f40
+	faligndata %f44, %f46, %f42
+	faligndata %f46, %f48, %f44
+	faligndata %f48, %f50, %f46
+
+	SHA512
+
+	subcc	%o2, 1, %o2
+	fsrc2	%f50, %f18
+	bne,pt	%xcc, 1b
+	 add	%o1, 0x80, %o1
+
+	ba,a,pt	%xcc, 5b
+ENDPROC(sha512_sparc64_transform)
diff --git a/arch/sparc/crypto/sha512_glue.c b/arch/sparc/crypto/sha512_glue.c
new file mode 100644
index 000000000000..486f0a2b7001
--- /dev/null
+++ b/arch/sparc/crypto/sha512_glue.c
@@ -0,0 +1,226 @@
+/* Glue code for SHA512 hashing optimized for sparc64 crypto opcodes.
+ *
+ * This is based largely upon crypto/sha512_generic.c
+ *
+ * Copyright (c) Jean-Luc Cooke <jlcooke@certainkey.com>
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) 2003 Kyle McMartin <kyle@debian.org>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/sha.h>
+
+#include <asm/pstate.h>
+#include <asm/elf.h>
+
+#include "opcodes.h"
+
+asmlinkage void sha512_sparc64_transform(u64 *digest, const char *data,
+					 unsigned int rounds);
+
+static int sha512_sparc64_init(struct shash_desc *desc)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	sctx->state[0] = SHA512_H0;
+	sctx->state[1] = SHA512_H1;
+	sctx->state[2] = SHA512_H2;
+	sctx->state[3] = SHA512_H3;
+	sctx->state[4] = SHA512_H4;
+	sctx->state[5] = SHA512_H5;
+	sctx->state[6] = SHA512_H6;
+	sctx->state[7] = SHA512_H7;
+	sctx->count[0] = sctx->count[1] = 0;
+
+	return 0;
+}
+
+static int sha384_sparc64_init(struct shash_desc *desc)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	sctx->state[0] = SHA384_H0;
+	sctx->state[1] = SHA384_H1;
+	sctx->state[2] = SHA384_H2;
+	sctx->state[3] = SHA384_H3;
+	sctx->state[4] = SHA384_H4;
+	sctx->state[5] = SHA384_H5;
+	sctx->state[6] = SHA384_H6;
+	sctx->state[7] = SHA384_H7;
+	sctx->count[0] = sctx->count[1] = 0;
+
+	return 0;
+}
+
+static void __sha512_sparc64_update(struct sha512_state *sctx, const u8 *data,
+				    unsigned int len, unsigned int partial)
+{
+	unsigned int done = 0;
+
+	if ((sctx->count[0] += len) < len)
+		sctx->count[1]++;
+	if (partial) {
+		done = SHA512_BLOCK_SIZE - partial;
+		memcpy(sctx->buf + partial, data, done);
+		sha512_sparc64_transform(sctx->state, sctx->buf, 1);
+	}
+	if (len - done >= SHA512_BLOCK_SIZE) {
+		const unsigned int rounds = (len - done) / SHA512_BLOCK_SIZE;
+
+		sha512_sparc64_transform(sctx->state, data + done, rounds);
+		done += rounds * SHA512_BLOCK_SIZE;
+	}
+
+	memcpy(sctx->buf, data + done, len - done);
+}
+
+static int sha512_sparc64_update(struct shash_desc *desc, const u8 *data,
+				 unsigned int len)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	unsigned int partial = sctx->count[0] % SHA512_BLOCK_SIZE;
+
+	/* Handle the fast case right here */
+	if (partial + len < SHA512_BLOCK_SIZE) {
+		if ((sctx->count[0] += len) < len)
+			sctx->count[1]++;
+		memcpy(sctx->buf + partial, data, len);
+	} else
+		__sha512_sparc64_update(sctx, data, len, partial);
+
+	return 0;
+}
+
+static int sha512_sparc64_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	unsigned int i, index, padlen;
+	__be64 *dst = (__be64 *)out;
+	__be64 bits[2];
+	static const u8 padding[SHA512_BLOCK_SIZE] = { 0x80, };
+
+	/* Save number of bits */
+	bits[1] = cpu_to_be64(sctx->count[0] << 3);
+	bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
+
+	/* Pad out to 112 mod 128 and append length */
+	index = sctx->count[0] % SHA512_BLOCK_SIZE;
+	padlen = (index < 112) ? (112 - index) : ((SHA512_BLOCK_SIZE+112) - index);
+
+	/* We need to fill a whole block for __sha512_sparc64_update() */
+	if (padlen <= 112) {
+		if ((sctx->count[0] += padlen) < padlen)
+			sctx->count[1]++;
+		memcpy(sctx->buf + index, padding, padlen);
+	} else {
+		__sha512_sparc64_update(sctx, padding, padlen, index);
+	}
+	__sha512_sparc64_update(sctx, (const u8 *)&bits, sizeof(bits), 112);
+
+	/* Store state in digest */
+	for (i = 0; i < 8; i++)
+		dst[i] = cpu_to_be64(sctx->state[i]);
+
+	/* Wipe context */
+	memset(sctx, 0, sizeof(*sctx));
+
+	return 0;
+}
+
+static int sha384_sparc64_final(struct shash_desc *desc, u8 *hash)
+{
+	u8 D[64];
+
+	sha512_sparc64_final(desc, D);
+
+	memcpy(hash, D, 48);
+	memset(D, 0, 64);
+
+	return 0;
+}
+
+static struct shash_alg sha512 = {
+	.digestsize	=	SHA512_DIGEST_SIZE,
+	.init		=	sha512_sparc64_init,
+	.update		=	sha512_sparc64_update,
+	.final		=	sha512_sparc64_final,
+	.descsize	=	sizeof(struct sha512_state),
+	.base		=	{
+		.cra_name	=	"sha512",
+		.cra_driver_name=	"sha512-sparc64",
+		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA512_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static struct shash_alg sha384 = {
+	.digestsize	=	SHA384_DIGEST_SIZE,
+	.init		=	sha384_sparc64_init,
+	.update		=	sha512_sparc64_update,
+	.final		=	sha384_sparc64_final,
+	.descsize	=	sizeof(struct sha512_state),
+	.base		=	{
+		.cra_name	=	"sha384",
+		.cra_driver_name=	"sha384-sparc64",
+		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA384_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static bool __init sparc64_has_sha512_opcode(void)
+{
+	unsigned long cfr;
+
+	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
+		return false;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+	if (!(cfr & CFR_SHA512))
+		return false;
+
+	return true;
+}
+
+static int __init sha512_sparc64_mod_init(void)
+{
+	if (sparc64_has_sha512_opcode()) {
+		int ret = crypto_register_shash(&sha384);
+		if (ret < 0)
+			return ret;
+
+		ret = crypto_register_shash(&sha512);
+		if (ret < 0) {
+			crypto_unregister_shash(&sha384);
+			return ret;
+		}
+
+		pr_info("Using sparc64 sha512 opcode optimized SHA-512/SHA-384 implementation\n");
+		return 0;
+	}
+	pr_info("sparc64 sha512 opcode not available.\n");
+	return -ENODEV;
+}
+
+static void __exit sha512_sparc64_mod_fini(void)
+{
+	crypto_unregister_shash(&sha384);
+	crypto_unregister_shash(&sha512);
+}
+
+module_init(sha512_sparc64_mod_init);
+module_exit(sha512_sparc64_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA-384 and SHA-512 Secure Hash Algorithm, sparc64 sha512 opcode accelerated");
+
+MODULE_ALIAS("sha384");
+MODULE_ALIAS("sha512");
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
index 61ebe7411ceb..cc0006dc5d4a 100644
--- a/arch/sparc/include/asm/asi.h
+++ b/arch/sparc/include/asm/asi.h
@@ -141,7 +141,8 @@
 /* SpitFire and later extended ASIs.  The "(III)" marker designates
  * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
  * Chip Multi Threading specific ASIs.  "(NG)" designates Niagara specific
- * ASIs, "(4V)" designates SUN4V specific ASIs.
+ * ASIs, "(4V)" designates SUN4V specific ASIs.  "(NG4)" designates SPARC-T4
+ * and later ASIs.
  */
 #define ASI_PHYS_USE_EC		0x14 /* PADDR, E-cachable		*/
 #define ASI_PHYS_BYPASS_EC_E	0x15 /* PADDR, E-bit			*/
@@ -243,6 +244,7 @@
 #define ASI_UDBL_CONTROL_R	0x7f /* External UDB control regs rd low*/
 #define ASI_INTR_R		0x7f /* IRQ vector dispatch read	*/
 #define ASI_INTR_DATAN_R	0x7f /* (III) In irq vector data reg N	*/
+#define ASI_PIC			0xb0 /* (NG4) PIC registers		*/
 #define ASI_PST8_P		0xc0 /* Primary, 8 8-bit, partial	*/
 #define ASI_PST8_S		0xc1 /* Secondary, 8 8-bit, partial	*/
 #define ASI_PST16_P		0xc2 /* Primary, 4 16-bit, partial	*/
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index b8be20d42a0a..cef99fbc0a21 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -36,6 +36,7 @@ typedef s64		compat_s64;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
 typedef u64		compat_u64;
+typedef u32		compat_uptr_t;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
@@ -147,6 +148,65 @@ typedef u32		compat_old_sigset_t;
 
 typedef u32		compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+#define SI_PAD_SIZE32	(128/sizeof(int) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE32];
+
+		/* kill() */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			unsigned int _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;		/* timer id */
+			int _overrun;			/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;		/* sender's pid */
+			unsigned int _uid;		/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			compat_pid_t _pid;		/* which child */
+			unsigned int _uid;		/* sender's uid */
+			int _status;			/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */
+		struct {
+			u32 _addr; /* faulting insn/memory ref. */
+			int _trapno;
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
@@ -156,7 +216,6 @@ typedef u32		compat_sigset_word;
  * as pointers because the syscall entry code will have
  * appropriately converted them already.
  */
-typedef	u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h
index 2d4d755cba9e..ac74a2c98e6d 100644
--- a/arch/sparc/include/asm/elf_32.h
+++ b/arch/sparc/include/asm/elf_32.h
@@ -128,6 +128,7 @@ typedef struct {
 
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
 #endif /* !(__ASMSPARC_ELF_H) */
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 7df8b7f544d4..370ca1e71ffb 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -86,6 +86,15 @@
 #define AV_SPARC_IMA		0x00400000 /* integer multiply-add */
 #define AV_SPARC_ASI_CACHE_SPARING \
 				0x00800000 /* cache sparing ASIs available */
+#define AV_SPARC_PAUSE		0x01000000 /* PAUSE available */
+#define AV_SPARC_CBCOND		0x02000000 /* CBCOND insns available */
+
+/* Solaris decided to enumerate every single crypto instruction type
+ * in the AT_HWCAP bits.  This is wasteful, since if crypto is present,
+ * you still need to look in the CFR register to see if the opcode is
+ * really available.  So we simply advertise only "crypto" support.
+ */
+#define HWCAP_SPARC_CRYPTO	0x04000000 /* CRYPTO insns available */
 
 #define CORE_DUMP_USE_REGSET
 
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
index 015a761eaa32..ca121f0fa3ec 100644
--- a/arch/sparc/include/asm/hypervisor.h
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -2934,6 +2934,16 @@ extern unsigned long sun4v_reboot_data_set(unsigned long ra,
 					   unsigned long len);
 #endif
 
+#define HV_FAST_VT_GET_PERFREG		0x184
+#define HV_FAST_VT_SET_PERFREG		0x185
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_vt_get_perfreg(unsigned long reg_num,
+					  unsigned long *reg_val);
+extern unsigned long sun4v_vt_set_perfreg(unsigned long reg_num,
+					  unsigned long reg_val);
+#endif
+
 /* Function numbers for HV_CORE_TRAP.  */
 #define HV_CORE_SET_VER			0x00
 #define HV_CORE_PUTCHAR			0x01
@@ -2964,6 +2974,7 @@ extern unsigned long sun4v_reboot_data_set(unsigned long ra,
 #define HV_GRP_NIU			0x0204
 #define HV_GRP_VF_CPU			0x0205
 #define HV_GRP_KT_CPU			0x0209
+#define HV_GRP_VT_CPU			0x020c
 #define HV_GRP_DIAG			0x0300
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
index 9faa046713fb..139097f3a67b 100644
--- a/arch/sparc/include/asm/mdesc.h
+++ b/arch/sparc/include/asm/mdesc.h
@@ -73,6 +73,7 @@ extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
 
 extern void mdesc_fill_in_cpu_data(cpumask_t *mask);
 extern void mdesc_populate_present_mask(cpumask_t *mask);
+extern void mdesc_get_page_sizes(cpumask_t *mask, unsigned long *pgsz_mask);
 
 extern void sun4v_mdesc_init(void);
 
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index 27517879a6c2..c72f3045820c 100644
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -94,7 +94,7 @@ extern int prom_getprev(void);
 extern void prom_console_write_buf(const char *buf, int len);
 
 /* Prom's internal routines, don't use in kernel/boot code. */
-extern void prom_printf(const char *fmt, ...);
+extern __printf(1, 2) void prom_printf(const char *fmt, ...);
 extern void prom_write(const char *buf, unsigned int len);
 
 /* Multiprocessor operations... */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index 97a90475c314..a12dbe3b7762 100644
--- a/arch/sparc/include/asm/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -98,7 +98,7 @@ extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
 extern void prom_console_write_buf(const char *buf, int len);
 
 /* Prom's internal routines, don't use in kernel/boot code. */
-extern void prom_printf(const char *fmt, ...);
+extern __printf(1, 2) void prom_printf(const char *fmt, ...);
 extern void prom_write(const char *buf, unsigned int len);
 
 /* Multiprocessor operations... */
diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h
index 288d7beba051..942bb17f60cd 100644
--- a/arch/sparc/include/asm/pcr.h
+++ b/arch/sparc/include/asm/pcr.h
@@ -2,8 +2,13 @@
 #define __PCR_H
 
 struct pcr_ops {
-	u64 (*read)(void);
-	void (*write)(u64);
+	u64 (*read_pcr)(unsigned long);
+	void (*write_pcr)(unsigned long, u64);
+	u64 (*read_pic)(unsigned long);
+	void (*write_pic)(unsigned long, u64);
+	u64 (*nmi_picl_value)(unsigned int nmi_hz);
+	u64 pcr_nmi_enable;
+	u64 pcr_nmi_disable;
 };
 extern const struct pcr_ops *pcr_ops;
 
@@ -27,21 +32,18 @@ extern void schedule_deferred_pcr_work(void);
 #define PCR_N2_SL1_SHIFT	27
 #define PCR_N2_OV1		0x80000000
 
-extern unsigned int picl_shift;
-
-/* In order to commonize as much of the implementation as
- * possible, we use PICH as our counter.  Mostly this is
- * to accommodate Niagara-1 which can only count insn cycles
- * in PICH.
- */
-static inline u64 picl_value(unsigned int nmi_hz)
-{
-	u32 delta = local_cpu_data().clock_tick / (nmi_hz << picl_shift);
-
-	return ((u64)((0 - delta) & 0xffffffff)) << 32;
-}
-
-extern u64 pcr_enable;
+#define PCR_N4_OV		0x00000001 /* PIC overflow             */
+#define PCR_N4_TOE		0x00000002 /* Trap On Event            */
+#define PCR_N4_UTRACE		0x00000004 /* Trace user events        */
+#define PCR_N4_STRACE		0x00000008 /* Trace supervisor events  */
+#define PCR_N4_HTRACE		0x00000010 /* Trace hypervisor events  */
+#define PCR_N4_MASK		0x000007e0 /* Event mask               */
+#define PCR_N4_MASK_SHIFT	5
+#define PCR_N4_SL		0x0000f800 /* Event Select             */
+#define PCR_N4_SL_SHIFT		11
+#define PCR_N4_PICNPT		0x00010000 /* PIC non-privileged trap  */
+#define PCR_N4_PICNHT		0x00020000 /* PIC non-hypervisor trap  */
+#define PCR_N4_NTC		0x00040000 /* Next-To-Commit wrap      */
 
 extern int pcr_arch_init(void);
 
diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h
index 3332d2cba6c1..214feefa577c 100644
--- a/arch/sparc/include/asm/perfctr.h
+++ b/arch/sparc/include/asm/perfctr.h
@@ -54,11 +54,6 @@ enum perfctr_opcode {
 	PERFCTR_GETPCR
 };
 
-/* I don't want the kernel's namespace to be polluted with this
- * stuff when this file is included.  --DaveM
- */
-#ifndef __KERNEL__
-
 #define  PRIV 0x00000001
 #define  SYS  0x00000002
 #define  USR  0x00000004
@@ -168,29 +163,4 @@ struct vcounter_struct {
   unsigned long long vcnt1;
 };
 
-#else /* !(__KERNEL__) */
-
-#ifndef CONFIG_SPARC32
-
-/* Performance counter register access. */
-#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
-#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
-#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
-
-/* Blackbird errata workaround.  See commentary in
- * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
- * for more information.
- */
-#define write_pic(__p)  					\
-	__asm__ __volatile__("ba,pt	%%xcc, 99f\n\t"		\
-			     " nop\n\t"				\
-			     ".align	64\n"			\
-			  "99:wr	%0, 0x0, %%pic\n\t"	\
-			     "rd	%%pic, %%g0" : : "r" (__p))
-#define reset_pic()	write_pic(0)
-
-#endif /* !CONFIG_SPARC32 */
-
-#endif /* !(__KERNEL__) */
-
 #endif /* !(PERF_COUNTER_API) */
diff --git a/arch/sparc/include/asm/pstate.h b/arch/sparc/include/asm/pstate.h
index a26a53777bb0..4b6b998afd99 100644
--- a/arch/sparc/include/asm/pstate.h
+++ b/arch/sparc/include/asm/pstate.h
@@ -88,4 +88,18 @@
 #define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
 #define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
 
+/* Compatability Feature Register (%asr26), SPARC-T4 and later  */
+#define CFR_AES		_AC(0x0000000000000001,UL) /* Supports AES opcodes     */
+#define CFR_DES		_AC(0x0000000000000002,UL) /* Supports DES opcodes     */
+#define CFR_KASUMI	_AC(0x0000000000000004,UL) /* Supports KASUMI opcodes  */
+#define CFR_CAMELLIA	_AC(0x0000000000000008,UL) /* Supports CAMELLIA opcodes*/
+#define CFR_MD5		_AC(0x0000000000000010,UL) /* Supports MD5 opcodes     */
+#define CFR_SHA1	_AC(0x0000000000000020,UL) /* Supports SHA1 opcodes    */
+#define CFR_SHA256	_AC(0x0000000000000040,UL) /* Supports SHA256 opcodes  */
+#define CFR_SHA512	_AC(0x0000000000000080,UL) /* Supports SHA512 opcodes  */
+#define CFR_MPMUL	_AC(0x0000000000000100,UL) /* Supports MPMUL opcodes   */
+#define CFR_MONTMUL	_AC(0x0000000000000200,UL) /* Supports MONTMUL opcodes */
+#define CFR_MONTSQR	_AC(0x0000000000000400,UL) /* Supports MONTSQR opcodes */
+#define CFR_CRC32C	_AC(0x0000000000000800,UL) /* Supports CRC32C opcodes  */
+
 #endif /* !(_SPARC64_PSTATE_H) */
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
index 215900fce21b..dbc182c438b4 100644
--- a/arch/sparc/include/asm/siginfo.h
+++ b/arch/sparc/include/asm/siginfo.h
@@ -3,7 +3,6 @@
 
 #if defined(__sparc__) && defined(__arch64__)
 
-#define SI_PAD_SIZE32	((SI_MAX_SIZE/sizeof(int)) - 3)
 #define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
 #define __ARCH_SI_BAND_T int
 
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index fb2693464807..d9a677c51926 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -447,6 +447,7 @@
 #else
 #define __ARCH_WANT_COMPAT_SYS_TIME
 #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_SENDFILE
 #endif
 
 /*
diff --git a/arch/sparc/include/uapi/asm/Kbuild b/arch/sparc/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..7518ad286963
--- /dev/null
+++ b/arch/sparc/include/uapi/asm/Kbuild
@@ -0,0 +1,5 @@
+# UAPI Header export list
+# User exported sparc header files
+
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index b42ddbf9651e..ee5dcced2499 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -559,10 +559,10 @@ niagara_tlb_fixup:
 	be,pt	%xcc, niagara2_patch
 	 nop
 	cmp	%g1, SUN4V_CHIP_NIAGARA4
-	be,pt	%xcc, niagara2_patch
+	be,pt	%xcc, niagara4_patch
 	 nop
 	cmp	%g1, SUN4V_CHIP_NIAGARA5
-	be,pt	%xcc, niagara2_patch
+	be,pt	%xcc, niagara4_patch
 	 nop
 
 	call	generic_patch_copyops
@@ -573,6 +573,16 @@ niagara_tlb_fixup:
 	 nop
 
 	ba,a,pt	%xcc, 80f
+niagara4_patch:
+	call	niagara4_patch_copyops
+	 nop
+	call	niagara_patch_bzero
+	 nop
+	call	niagara4_patch_pageops
+	 nop
+
+	ba,a,pt	%xcc, 80f
+
 niagara2_patch:
 	call	niagara2_patch_copyops
 	 nop
diff --git a/arch/sparc/kernel/hvapi.c b/arch/sparc/kernel/hvapi.c
index 8593672838fd..c0a2de0fd624 100644
--- a/arch/sparc/kernel/hvapi.c
+++ b/arch/sparc/kernel/hvapi.c
@@ -45,6 +45,7 @@ static struct api_info api_table[] = {
 	{ .group = HV_GRP_NIU,					},
 	{ .group = HV_GRP_VF_CPU,				},
 	{ .group = HV_GRP_KT_CPU,				},
+	{ .group = HV_GRP_VT_CPU,				},
 	{ .group = HV_GRP_DIAG,		.flags = FLAG_PRE_API	},
 };
 
@@ -193,7 +194,7 @@ void __init sun4v_hvapi_init(void)
 
 bad:
 	prom_printf("HVAPI: Cannot register API group "
-		    "%lx with major(%u) minor(%u)\n",
+		    "%lx with major(%lu) minor(%lu)\n",
 		    group, major, minor);
 	prom_halt();
 }
diff --git a/arch/sparc/kernel/hvcalls.S b/arch/sparc/kernel/hvcalls.S
index 58d60de4d65b..f3ab509b76a8 100644
--- a/arch/sparc/kernel/hvcalls.S
+++ b/arch/sparc/kernel/hvcalls.S
@@ -805,3 +805,19 @@ ENTRY(sun4v_reboot_data_set)
 	retl
 	 nop
 ENDPROC(sun4v_reboot_data_set)
+
+ENTRY(sun4v_vt_get_perfreg)
+	mov	%o1, %o4
+	mov	HV_FAST_VT_GET_PERFREG, %o5
+	ta	HV_FAST_TRAP
+	stx	%o1, [%o4]
+	retl
+	 nop
+ENDPROC(sun4v_vt_get_perfreg)
+
+ENTRY(sun4v_vt_set_perfreg)
+	mov	HV_FAST_VT_SET_PERFREG, %o5
+	ta	HV_FAST_TRAP
+	retl
+	 nop
+ENDPROC(sun4v_vt_set_perfreg)
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index 79f310364849..0746e5e32b37 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -188,31 +188,26 @@ valid_addr_bitmap_patch:
 	be,pn		%xcc, kvmap_dtlb_longpath
 
 2:	 sethi		%hi(kpte_linear_bitmap), %g2
-	or		%g2, %lo(kpte_linear_bitmap), %g2
 
 	/* Get the 256MB physical address index. */
 	sllx		%g4, 21, %g5
-	mov		1, %g7
+	or		%g2, %lo(kpte_linear_bitmap), %g2
 	srlx		%g5, 21 + 28, %g5
+	and		%g5, (32 - 1), %g7
 
-	/* Don't try this at home kids... this depends upon srlx
-	 * only taking the low 6 bits of the shift count in %g5.
-	 */
-	sllx		%g7, %g5, %g7
-
-	/* Divide by 64 to get the offset into the bitmask.  */
-	srlx		%g5, 6, %g5
+	/* Divide by 32 to get the offset into the bitmask.  */
+	srlx		%g5, 5, %g5
+	add		%g7, %g7, %g7
 	sllx		%g5, 3, %g5
 
-	/* kern_linear_pte_xor[((mask & bit) ? 1 : 0)] */
+	/* kern_linear_pte_xor[(mask >> shift) & 3)] */
 	ldx		[%g2 + %g5], %g2
-	andcc		%g2, %g7, %g0
+	srlx		%g2, %g7, %g7
 	sethi		%hi(kern_linear_pte_xor), %g5
+	and		%g7, 3, %g7
 	or		%g5, %lo(kern_linear_pte_xor), %g5
-	bne,a,pt	%xcc, 1f
-	 add		%g5, 8, %g5
-
-1:	ldx		[%g5], %g2
+	sllx		%g7, 3, %g7
+	ldx		[%g5 + %g7], %g2
 
 	.globl		kvmap_linear_patch
 kvmap_linear_patch:
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index 21dcda75a520..fc0521161568 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -102,15 +102,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return pci_enable_resources(dev, mask);
 }
 
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-#ifdef CONFIG_PCI_DEBUG
-	printk(KERN_DEBUG "LEONPCI: Assigning IRQ %02d to %s\n", irq,
-		pci_name(dev));
-#endif
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 /* in/out routines taken from pcic.c
  *
  * This probably belongs here rather than ioport.c because
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 6dc796280589..831c001604e8 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -817,6 +817,30 @@ void __cpuinit mdesc_populate_present_mask(cpumask_t *mask)
 	mdesc_iterate_over_cpus(record_one_cpu, NULL, mask);
 }
 
+static void * __init check_one_pgsz(struct mdesc_handle *hp, u64 mp, int cpuid, void *arg)
+{
+	const u64 *pgsz_prop = mdesc_get_property(hp, mp, "mmu-page-size-list", NULL);
+	unsigned long *pgsz_mask = arg;
+	u64 val;
+
+	val = (HV_PGSZ_MASK_8K | HV_PGSZ_MASK_64K |
+	       HV_PGSZ_MASK_512K | HV_PGSZ_MASK_4MB);
+	if (pgsz_prop)
+		val = *pgsz_prop;
+
+	if (!*pgsz_mask)
+		*pgsz_mask = val;
+	else
+		*pgsz_mask &= val;
+	return NULL;
+}
+
+void __init mdesc_get_page_sizes(cpumask_t *mask, unsigned long *pgsz_mask)
+{
+	*pgsz_mask = 0;
+	mdesc_iterate_over_cpus(check_one_pgsz, pgsz_mask, mask);
+}
+
 static void * __cpuinit fill_in_one_cpu(struct mdesc_handle *hp, u64 mp, int cpuid, void *arg)
 {
 	const u64 *cfreq = mdesc_get_property(hp, mp, "clock-frequency", NULL);
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 15e0a1693976..f1ddc0d23679 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -48,9 +48,7 @@ void *module_alloc(unsigned long size)
 		return NULL;
 
 	ret = module_map(size);
-	if (!ret)
-		ret = ERR_PTR(-ENOMEM);
-	else
+	if (ret)
 		memset(ret, 0, size);
 
 	return ret;
@@ -116,6 +114,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 		v = sym->st_value + rel[i].r_addend;
 
 		switch (ELF_R_TYPE(rel[i].r_info) & 0xff) {
+		case R_SPARC_DISP32:
+			v -= (Elf_Addr) location;
+			*loc32 = v;
+			break;
 #ifdef CONFIG_SPARC64
 		case R_SPARC_64:
 			location[0] = v >> 56;
@@ -128,11 +130,6 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			location[7] = v >>  0;
 			break;
 
-		case R_SPARC_DISP32:
-			v -= (Elf_Addr) location;
-			*loc32 = v;
-			break;
-
 		case R_SPARC_WDISP19:
 			v -= (Elf_Addr) location;
 			*loc32 = (*loc32 & ~0x7ffff) |
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index eb1c1f010a47..6479256fd5a4 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -22,7 +22,6 @@
 #include <asm/perf_event.h>
 #include <asm/ptrace.h>
 #include <asm/pcr.h>
-#include <asm/perfctr.h>
 
 #include "kstack.h"
 
@@ -109,7 +108,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 		       pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
 		touched = 1;
 	else
-		pcr_ops->write(PCR_PIC_PRIV);
+		pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable);
 
 	sum = local_cpu_data().irq0_irqs;
 	if (__get_cpu_var(nmi_touch)) {
@@ -126,8 +125,8 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 		__this_cpu_write(alert_counter, 0);
 	}
 	if (__get_cpu_var(wd_enabled)) {
-		write_pic(picl_value(nmi_hz));
-		pcr_ops->write(pcr_enable);
+		pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz));
+		pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable);
 	}
 
 	restore_hardirq_stack(orig_sp);
@@ -166,7 +165,7 @@ static void report_broken_nmi(int cpu, int *prev_nmi_count)
 
 void stop_nmi_watchdog(void *unused)
 {
-	pcr_ops->write(PCR_PIC_PRIV);
+	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable);
 	__get_cpu_var(wd_enabled) = 0;
 	atomic_dec(&nmi_active);
 }
@@ -223,10 +222,10 @@ void start_nmi_watchdog(void *unused)
 	__get_cpu_var(wd_enabled) = 1;
 	atomic_inc(&nmi_active);
 
-	pcr_ops->write(PCR_PIC_PRIV);
-	write_pic(picl_value(nmi_hz));
+	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable);
+	pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz));
 
-	pcr_ops->write(pcr_enable);
+	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable);
 }
 
 static void nmi_adjust_hz_one(void *unused)
@@ -234,10 +233,10 @@ static void nmi_adjust_hz_one(void *unused)
 	if (!__get_cpu_var(wd_enabled))
 		return;
 
-	pcr_ops->write(PCR_PIC_PRIV);
-	write_pic(picl_value(nmi_hz));
+	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_disable);
+	pcr_ops->write_pic(0, pcr_ops->nmi_picl_value(nmi_hz));
 
-	pcr_ops->write(pcr_enable);
+	pcr_ops->write_pcr(0, pcr_ops->pcr_nmi_enable);
 }
 
 void nmi_adjust_hz(unsigned int new_hz)
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 065b88c4f868..acc8c838ff72 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -622,10 +622,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
 {
 }
 
-void pcibios_update_irq(struct pci_dev *pdev, int irq)
-{
-}
-
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 7661e84a05a0..051b69caeffd 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -594,7 +594,7 @@ static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 		printk(KERN_ERR PFX "Strange virtual-dma[%08x:%08x].\n",
 		       vdma[0], vdma[1]);
 		return -EINVAL;
-	};
+	}
 
 	dma_mask = (roundup_pow_of_two(vdma[1]) - 1UL);
 	num_tsb_entries = vdma[1] / IO_PAGE_SIZE;
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 0ce0dd2332aa..269af58497aa 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -13,23 +13,14 @@
 #include <asm/pil.h>
 #include <asm/pcr.h>
 #include <asm/nmi.h>
+#include <asm/asi.h>
 #include <asm/spitfire.h>
-#include <asm/perfctr.h>
 
 /* This code is shared between various users of the performance
  * counters.  Users will be oprofile, pseudo-NMI watchdog, and the
  * perf_event support layer.
  */
 
-#define PCR_SUN4U_ENABLE	(PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE)
-#define PCR_N2_ENABLE		(PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \
-				 PCR_N2_TOE_OV1 | \
-				 (2 << PCR_N2_SL1_SHIFT) | \
-				 (0xff << PCR_N2_MASK1_SHIFT))
-
-u64 pcr_enable;
-unsigned int picl_shift;
-
 /* Performance counter interrupts run unmasked at PIL level 15.
  * Therefore we can't do things like wakeups and other work
  * that expects IRQ disabling to be adhered to in locking etc.
@@ -60,39 +51,144 @@ void arch_irq_work_raise(void)
 const struct pcr_ops *pcr_ops;
 EXPORT_SYMBOL_GPL(pcr_ops);
 
-static u64 direct_pcr_read(void)
+static u64 direct_pcr_read(unsigned long reg_num)
 {
 	u64 val;
 
-	read_pcr(val);
+	WARN_ON_ONCE(reg_num != 0);
+	__asm__ __volatile__("rd %%pcr, %0" : "=r" (val));
 	return val;
 }
 
-static void direct_pcr_write(u64 val)
+static void direct_pcr_write(unsigned long reg_num, u64 val)
+{
+	WARN_ON_ONCE(reg_num != 0);
+	__asm__ __volatile__("wr %0, 0x0, %%pcr" : : "r" (val));
+}
+
+static u64 direct_pic_read(unsigned long reg_num)
 {
-	write_pcr(val);
+	u64 val;
+
+	WARN_ON_ONCE(reg_num != 0);
+	__asm__ __volatile__("rd %%pic, %0" : "=r" (val));
+	return val;
+}
+
+static void direct_pic_write(unsigned long reg_num, u64 val)
+{
+	WARN_ON_ONCE(reg_num != 0);
+
+	/* Blackbird errata workaround.  See commentary in
+	 * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
+	 * for more information.
+	 */
+	__asm__ __volatile__("ba,pt	%%xcc, 99f\n\t"
+			     " nop\n\t"
+			     ".align	64\n"
+			  "99:wr	%0, 0x0, %%pic\n\t"
+			     "rd	%%pic, %%g0" : : "r" (val));
+}
+
+static u64 direct_picl_value(unsigned int nmi_hz)
+{
+	u32 delta = local_cpu_data().clock_tick / nmi_hz;
+
+	return ((u64)((0 - delta) & 0xffffffff)) << 32;
 }
 
 static const struct pcr_ops direct_pcr_ops = {
-	.read	= direct_pcr_read,
-	.write	= direct_pcr_write,
+	.read_pcr		= direct_pcr_read,
+	.write_pcr		= direct_pcr_write,
+	.read_pic		= direct_pic_read,
+	.write_pic		= direct_pic_write,
+	.nmi_picl_value		= direct_picl_value,
+	.pcr_nmi_enable		= (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE),
+	.pcr_nmi_disable	= PCR_PIC_PRIV,
 };
 
-static void n2_pcr_write(u64 val)
+static void n2_pcr_write(unsigned long reg_num, u64 val)
 {
 	unsigned long ret;
 
+	WARN_ON_ONCE(reg_num != 0);
 	if (val & PCR_N2_HTRACE) {
 		ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val);
 		if (ret != HV_EOK)
-			write_pcr(val);
+			direct_pcr_write(reg_num, val);
 	} else
-		write_pcr(val);
+		direct_pcr_write(reg_num, val);
+}
+
+static u64 n2_picl_value(unsigned int nmi_hz)
+{
+	u32 delta = local_cpu_data().clock_tick / (nmi_hz << 2);
+
+	return ((u64)((0 - delta) & 0xffffffff)) << 32;
 }
 
 static const struct pcr_ops n2_pcr_ops = {
-	.read	= direct_pcr_read,
-	.write	= n2_pcr_write,
+	.read_pcr		= direct_pcr_read,
+	.write_pcr		= n2_pcr_write,
+	.read_pic		= direct_pic_read,
+	.write_pic		= direct_pic_write,
+	.nmi_picl_value		= n2_picl_value,
+	.pcr_nmi_enable		= (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE |
+				   PCR_N2_TOE_OV1 |
+				   (2 << PCR_N2_SL1_SHIFT) |
+				   (0xff << PCR_N2_MASK1_SHIFT)),
+	.pcr_nmi_disable	= PCR_PIC_PRIV,
+};
+
+static u64 n4_pcr_read(unsigned long reg_num)
+{
+	unsigned long val;
+
+	(void) sun4v_vt_get_perfreg(reg_num, &val);
+
+	return val;
+}
+
+static void n4_pcr_write(unsigned long reg_num, u64 val)
+{
+	(void) sun4v_vt_set_perfreg(reg_num, val);
+}
+
+static u64 n4_pic_read(unsigned long reg_num)
+{
+	unsigned long val;
+
+	__asm__ __volatile__("ldxa [%1] %2, %0"
+			     : "=r" (val)
+			     : "r" (reg_num * 0x8UL), "i" (ASI_PIC));
+
+	return val;
+}
+
+static void n4_pic_write(unsigned long reg_num, u64 val)
+{
+	__asm__ __volatile__("stxa %0, [%1] %2"
+			     : /* no outputs */
+			     : "r" (val), "r" (reg_num * 0x8UL), "i" (ASI_PIC));
+}
+
+static u64 n4_picl_value(unsigned int nmi_hz)
+{
+	u32 delta = local_cpu_data().clock_tick / (nmi_hz << 2);
+
+	return ((u64)((0 - delta) & 0xffffffff));
+}
+
+static const struct pcr_ops n4_pcr_ops = {
+	.read_pcr		= n4_pcr_read,
+	.write_pcr		= n4_pcr_write,
+	.read_pic		= n4_pic_read,
+	.write_pic		= n4_pic_write,
+	.nmi_picl_value		= n4_picl_value,
+	.pcr_nmi_enable		= (PCR_N4_PICNPT | PCR_N4_STRACE |
+				   PCR_N4_UTRACE | PCR_N4_TOE |
+				   (26 << PCR_N4_SL_SHIFT)),
+	.pcr_nmi_disable	= PCR_N4_PICNPT,
 };
 
 static unsigned long perf_hsvc_group;
@@ -115,6 +211,10 @@ static int __init register_perf_hsvc(void)
 			perf_hsvc_group = HV_GRP_KT_CPU;
 			break;
 
+		case SUN4V_CHIP_NIAGARA4:
+			perf_hsvc_group = HV_GRP_VT_CPU;
+			break;
+
 		default:
 			return -ENODEV;
 		}
@@ -139,6 +239,29 @@ static void __init unregister_perf_hsvc(void)
 	sun4v_hvapi_unregister(perf_hsvc_group);
 }
 
+static int __init setup_sun4v_pcr_ops(void)
+{
+	int ret = 0;
+
+	switch (sun4v_chip_type) {
+	case SUN4V_CHIP_NIAGARA1:
+	case SUN4V_CHIP_NIAGARA2:
+	case SUN4V_CHIP_NIAGARA3:
+		pcr_ops = &n2_pcr_ops;
+		break;
+
+	case SUN4V_CHIP_NIAGARA4:
+		pcr_ops = &n4_pcr_ops;
+		break;
+
+	default:
+		ret = -ENODEV;
+		break;
+	}
+
+	return ret;
+}
+
 int __init pcr_arch_init(void)
 {
 	int err = register_perf_hsvc();
@@ -148,15 +271,14 @@ int __init pcr_arch_init(void)
 
 	switch (tlb_type) {
 	case hypervisor:
-		pcr_ops = &n2_pcr_ops;
-		pcr_enable = PCR_N2_ENABLE;
-		picl_shift = 2;
+		err = setup_sun4v_pcr_ops();
+		if (err)
+			goto out_unregister;
 		break;
 
 	case cheetah:
 	case cheetah_plus:
 		pcr_ops = &direct_pcr_ops;
-		pcr_enable = PCR_SUN4U_ENABLE;
 		break;
 
 	case spitfire:
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 5713957dcb8a..e48651dace1b 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -25,36 +25,48 @@
 #include <linux/atomic.h>
 #include <asm/nmi.h>
 #include <asm/pcr.h>
-#include <asm/perfctr.h>
 #include <asm/cacheflush.h>
 
 #include "kernel.h"
 #include "kstack.h"
 
-/* Sparc64 chips have two performance counters, 32-bits each, with
- * overflow interrupts generated on transition from 0xffffffff to 0.
- * The counters are accessed in one go using a 64-bit register.
+/* Two classes of sparc64 chips currently exist.  All of which have
+ * 32-bit counters which can generate overflow interrupts on the
+ * transition from 0xffffffff to 0.
  *
- * Both counters are controlled using a single control register.  The
- * only way to stop all sampling is to clear all of the context (user,
- * supervisor, hypervisor) sampling enable bits.  But these bits apply
- * to both counters, thus the two counters can't be enabled/disabled
- * individually.
+ * All chips upto and including SPARC-T3 have two performance
+ * counters.  The two 32-bit counters are accessed in one go using a
+ * single 64-bit register.
  *
- * The control register has two event fields, one for each of the two
- * counters.  It's thus nearly impossible to have one counter going
- * while keeping the other one stopped.  Therefore it is possible to
- * get overflow interrupts for counters not currently "in use" and
- * that condition must be checked in the overflow interrupt handler.
+ * On these older chips both counters are controlled using a single
+ * control register.  The only way to stop all sampling is to clear
+ * all of the context (user, supervisor, hypervisor) sampling enable
+ * bits.  But these bits apply to both counters, thus the two counters
+ * can't be enabled/disabled individually.
+ *
+ * Furthermore, the control register on these older chips have two
+ * event fields, one for each of the two counters.  It's thus nearly
+ * impossible to have one counter going while keeping the other one
+ * stopped.  Therefore it is possible to get overflow interrupts for
+ * counters not currently "in use" and that condition must be checked
+ * in the overflow interrupt handler.
  *
  * So we use a hack, in that we program inactive counters with the
  * "sw_count0" and "sw_count1" events.  These count how many times
  * the instruction "sethi %hi(0xfc000), %g0" is executed.  It's an
  * unusual way to encode a NOP and therefore will not trigger in
  * normal code.
+ *
+ * Starting with SPARC-T4 we have one control register per counter.
+ * And the counters are stored in individual registers.  The registers
+ * for the counters are 64-bit but only a 32-bit counter is
+ * implemented.  The event selections on SPARC-T4 lack any
+ * restrictions, therefore we can elide all of the complicated
+ * conflict resolution code we have for SPARC-T3 and earlier chips.
  */
 
-#define MAX_HWEVENTS			2
+#define MAX_HWEVENTS			4
+#define MAX_PCRS			4
 #define MAX_PERIOD			((1UL << 32) - 1)
 
 #define PIC_UPPER_INDEX			0
@@ -90,8 +102,8 @@ struct cpu_hw_events {
 	 */
 	int			current_idx[MAX_HWEVENTS];
 
-	/* Software copy of %pcr register on this cpu.  */
-	u64			pcr;
+	/* Software copy of %pcr register(s) on this cpu.  */
+	u64			pcr[MAX_HWEVENTS];
 
 	/* Enabled/disable state.  */
 	int			enabled;
@@ -103,6 +115,8 @@ DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
 /* An event map describes the characteristics of a performance
  * counter event.  In particular it gives the encoding as well as
  * a mask telling which counters the event can be measured on.
+ *
+ * The mask is unused on SPARC-T4 and later.
  */
 struct perf_event_map {
 	u16	encoding;
@@ -142,15 +156,53 @@ struct sparc_pmu {
 	const struct perf_event_map	*(*event_map)(int);
 	const cache_map_t		*cache_map;
 	int				max_events;
+	u32				(*read_pmc)(int);
+	void				(*write_pmc)(int, u64);
 	int				upper_shift;
 	int				lower_shift;
 	int				event_mask;
+	int				user_bit;
+	int				priv_bit;
 	int				hv_bit;
 	int				irq_bit;
 	int				upper_nop;
 	int				lower_nop;
+	unsigned int			flags;
+#define SPARC_PMU_ALL_EXCLUDES_SAME	0x00000001
+#define SPARC_PMU_HAS_CONFLICTS		0x00000002
+	int				max_hw_events;
+	int				num_pcrs;
+	int				num_pic_regs;
 };
 
+static u32 sparc_default_read_pmc(int idx)
+{
+	u64 val;
+
+	val = pcr_ops->read_pic(0);
+	if (idx == PIC_UPPER_INDEX)
+		val >>= 32;
+
+	return val & 0xffffffff;
+}
+
+static void sparc_default_write_pmc(int idx, u64 val)
+{
+	u64 shift, mask, pic;
+
+	shift = 0;
+	if (idx == PIC_UPPER_INDEX)
+		shift = 32;
+
+	mask = ((u64) 0xffffffff) << shift;
+	val <<= shift;
+
+	pic = pcr_ops->read_pic(0);
+	pic &= ~mask;
+	pic |= val;
+	pcr_ops->write_pic(0, pic);
+}
+
 static const struct perf_event_map ultra3_perfmon_event_map[] = {
 	[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
 	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
@@ -268,11 +320,20 @@ static const struct sparc_pmu ultra3_pmu = {
 	.event_map	= ultra3_event_map,
 	.cache_map	= &ultra3_cache_map,
 	.max_events	= ARRAY_SIZE(ultra3_perfmon_event_map),
+	.read_pmc	= sparc_default_read_pmc,
+	.write_pmc	= sparc_default_write_pmc,
 	.upper_shift	= 11,
 	.lower_shift	= 4,
 	.event_mask	= 0x3f,
+	.user_bit	= PCR_UTRACE,
+	.priv_bit	= PCR_STRACE,
 	.upper_nop	= 0x1c,
 	.lower_nop	= 0x14,
+	.flags		= (SPARC_PMU_ALL_EXCLUDES_SAME |
+			   SPARC_PMU_HAS_CONFLICTS),
+	.max_hw_events	= 2,
+	.num_pcrs	= 1,
+	.num_pic_regs	= 1,
 };
 
 /* Niagara1 is very limited.  The upper PIC is hard-locked to count
@@ -397,11 +458,20 @@ static const struct sparc_pmu niagara1_pmu = {
 	.event_map	= niagara1_event_map,
 	.cache_map	= &niagara1_cache_map,
 	.max_events	= ARRAY_SIZE(niagara1_perfmon_event_map),
+	.read_pmc	= sparc_default_read_pmc,
+	.write_pmc	= sparc_default_write_pmc,
 	.upper_shift	= 0,
 	.lower_shift	= 4,
 	.event_mask	= 0x7,
+	.user_bit	= PCR_UTRACE,
+	.priv_bit	= PCR_STRACE,
 	.upper_nop	= 0x0,
 	.lower_nop	= 0x0,
+	.flags		= (SPARC_PMU_ALL_EXCLUDES_SAME |
+			   SPARC_PMU_HAS_CONFLICTS),
+	.max_hw_events	= 2,
+	.num_pcrs	= 1,
+	.num_pic_regs	= 1,
 };
 
 static const struct perf_event_map niagara2_perfmon_event_map[] = {
@@ -523,13 +593,203 @@ static const struct sparc_pmu niagara2_pmu = {
 	.event_map	= niagara2_event_map,
 	.cache_map	= &niagara2_cache_map,
 	.max_events	= ARRAY_SIZE(niagara2_perfmon_event_map),
+	.read_pmc	= sparc_default_read_pmc,
+	.write_pmc	= sparc_default_write_pmc,
 	.upper_shift	= 19,
 	.lower_shift	= 6,
 	.event_mask	= 0xfff,
-	.hv_bit		= 0x8,
+	.user_bit	= PCR_UTRACE,
+	.priv_bit	= PCR_STRACE,
+	.hv_bit		= PCR_N2_HTRACE,
 	.irq_bit	= 0x30,
 	.upper_nop	= 0x220,
 	.lower_nop	= 0x220,
+	.flags		= (SPARC_PMU_ALL_EXCLUDES_SAME |
+			   SPARC_PMU_HAS_CONFLICTS),
+	.max_hw_events	= 2,
+	.num_pcrs	= 1,
+	.num_pic_regs	= 1,
+};
+
+static const struct perf_event_map niagara4_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { (26 << 6) },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { (3 << 6) | 0x3f },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { (3 << 6) | 0x04 },
+	[PERF_COUNT_HW_CACHE_MISSES] = { (16 << 6) | 0x07 },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { (4 << 6) | 0x01 },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { (25 << 6) | 0x0f },
+};
+
+static const struct perf_event_map *niagara4_event_map(int event_id)
+{
+	return &niagara4_perfmon_event_map[event_id];
+}
+
+static const cache_map_t niagara4_cache_map = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { (3 << 6) | 0x04 },
+		[C(RESULT_MISS)] = { (16 << 6) | 0x07 },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { (3 << 6) | 0x08 },
+		[C(RESULT_MISS)] = { (16 << 6) | 0x07 },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { (3 << 6) | 0x3f },
+		[C(RESULT_MISS)] = { (11 << 6) | 0x03 },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { (3 << 6) | 0x04 },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)] = { (3 << 6) | 0x08 },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(DTLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { (17 << 6) | 0x3f },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { (6 << 6) | 0x3f },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(BPU)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+[C(NODE)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+		[C(RESULT_MISS)  ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+		[ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+	},
+},
+};
+
+static u32 sparc_vt_read_pmc(int idx)
+{
+	u64 val = pcr_ops->read_pic(idx);
+
+	return val & 0xffffffff;
+}
+
+static void sparc_vt_write_pmc(int idx, u64 val)
+{
+	u64 pcr;
+
+	/* There seems to be an internal latch on the overflow event
+	 * on SPARC-T4 that prevents it from triggering unless you
+	 * update the PIC exactly as we do here.  The requirement
+	 * seems to be that you have to turn off event counting in the
+	 * PCR around the PIC update.
+	 *
+	 * For example, after the following sequence:
+	 *
+	 * 1) set PIC to -1
+	 * 2) enable event counting and overflow reporting in PCR
+	 * 3) overflow triggers, softint 15 handler invoked
+	 * 4) clear OV bit in PCR
+	 * 5) write PIC to -1
+	 *
+	 * a subsequent overflow event will not trigger.  This
+	 * sequence works on SPARC-T3 and previous chips.
+	 */
+	pcr = pcr_ops->read_pcr(idx);
+	pcr_ops->write_pcr(idx, PCR_N4_PICNPT);
+
+	pcr_ops->write_pic(idx, val & 0xffffffff);
+
+	pcr_ops->write_pcr(idx, pcr);
+}
+
+static const struct sparc_pmu niagara4_pmu = {
+	.event_map	= niagara4_event_map,
+	.cache_map	= &niagara4_cache_map,
+	.max_events	= ARRAY_SIZE(niagara4_perfmon_event_map),
+	.read_pmc	= sparc_vt_read_pmc,
+	.write_pmc	= sparc_vt_write_pmc,
+	.upper_shift	= 5,
+	.lower_shift	= 5,
+	.event_mask	= 0x7ff,
+	.user_bit	= PCR_N4_UTRACE,
+	.priv_bit	= PCR_N4_STRACE,
+
+	/* We explicitly don't support hypervisor tracing.  The T4
+	 * generates the overflow event for precise events via a trap
+	 * which will not be generated (ie. it's completely lost) if
+	 * we happen to be in the hypervisor when the event triggers.
+	 * Essentially, the overflow event reporting is completely
+	 * unusable when you have hypervisor mode tracing enabled.
+	 */
+	.hv_bit		= 0,
+
+	.irq_bit	= PCR_N4_TOE,
+	.upper_nop	= 0,
+	.lower_nop	= 0,
+	.flags		= 0,
+	.max_hw_events	= 4,
+	.num_pcrs	= 4,
+	.num_pic_regs	= 4,
 };
 
 static const struct sparc_pmu *sparc_pmu __read_mostly;
@@ -558,55 +818,35 @@ static u64 nop_for_index(int idx)
 static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
 {
 	u64 val, mask = mask_for_index(idx);
+	int pcr_index = 0;
 
-	val = cpuc->pcr;
+	if (sparc_pmu->num_pcrs > 1)
+		pcr_index = idx;
+
+	val = cpuc->pcr[pcr_index];
 	val &= ~mask;
 	val |= hwc->config;
-	cpuc->pcr = val;
+	cpuc->pcr[pcr_index] = val;
 
-	pcr_ops->write(cpuc->pcr);
+	pcr_ops->write_pcr(pcr_index, cpuc->pcr[pcr_index]);
 }
 
 static inline void sparc_pmu_disable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
 {
 	u64 mask = mask_for_index(idx);
 	u64 nop = nop_for_index(idx);
+	int pcr_index = 0;
 	u64 val;
 
-	val = cpuc->pcr;
+	if (sparc_pmu->num_pcrs > 1)
+		pcr_index = idx;
+
+	val = cpuc->pcr[pcr_index];
 	val &= ~mask;
 	val |= nop;
-	cpuc->pcr = val;
+	cpuc->pcr[pcr_index] = val;
 
-	pcr_ops->write(cpuc->pcr);
-}
-
-static u32 read_pmc(int idx)
-{
-	u64 val;
-
-	read_pic(val);
-	if (idx == PIC_UPPER_INDEX)
-		val >>= 32;
-
-	return val & 0xffffffff;
-}
-
-static void write_pmc(int idx, u64 val)
-{
-	u64 shift, mask, pic;
-
-	shift = 0;
-	if (idx == PIC_UPPER_INDEX)
-		shift = 32;
-
-	mask = ((u64) 0xffffffff) << shift;
-	val <<= shift;
-
-	read_pic(pic);
-	pic &= ~mask;
-	pic |= val;
-	write_pic(pic);
+	pcr_ops->write_pcr(pcr_index, cpuc->pcr[pcr_index]);
 }
 
 static u64 sparc_perf_event_update(struct perf_event *event,
@@ -618,7 +858,7 @@ static u64 sparc_perf_event_update(struct perf_event *event,
 
 again:
 	prev_raw_count = local64_read(&hwc->prev_count);
-	new_raw_count = read_pmc(idx);
+	new_raw_count = sparc_pmu->read_pmc(idx);
 
 	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 			     new_raw_count) != prev_raw_count)
@@ -658,25 +898,17 @@ static int sparc_perf_event_set_period(struct perf_event *event,
 
 	local64_set(&hwc->prev_count, (u64)-left);
 
-	write_pmc(idx, (u64)(-left) & 0xffffffff);
+	sparc_pmu->write_pmc(idx, (u64)(-left) & 0xffffffff);
 
 	perf_event_update_userpage(event);
 
 	return ret;
 }
 
-/* If performance event entries have been added, move existing
- * events around (if necessary) and then assign new entries to
- * counters.
- */
-static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
+static void read_in_all_counters(struct cpu_hw_events *cpuc)
 {
 	int i;
 
-	if (!cpuc->n_added)
-		goto out;
-
-	/* Read in the counters which are moving.  */
 	for (i = 0; i < cpuc->n_events; i++) {
 		struct perf_event *cp = cpuc->event[i];
 
@@ -687,6 +919,20 @@ static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
 			cpuc->current_idx[i] = PIC_NO_INDEX;
 		}
 	}
+}
+
+/* On this PMU all PICs are programmed using a single PCR.  Calculate
+ * the combined control register value.
+ *
+ * For such chips we require that all of the events have the same
+ * configuration, so just fetch the settings from the first entry.
+ */
+static void calculate_single_pcr(struct cpu_hw_events *cpuc)
+{
+	int i;
+
+	if (!cpuc->n_added)
+		goto out;
 
 	/* Assign to counters all unassigned events.  */
 	for (i = 0; i < cpuc->n_events; i++) {
@@ -702,20 +948,71 @@ static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
 		cpuc->current_idx[i] = idx;
 
 		enc = perf_event_get_enc(cpuc->events[i]);
-		pcr &= ~mask_for_index(idx);
+		cpuc->pcr[0] &= ~mask_for_index(idx);
 		if (hwc->state & PERF_HES_STOPPED)
-			pcr |= nop_for_index(idx);
+			cpuc->pcr[0] |= nop_for_index(idx);
 		else
-			pcr |= event_encoding(enc, idx);
+			cpuc->pcr[0] |= event_encoding(enc, idx);
 	}
 out:
-	return pcr;
+	cpuc->pcr[0] |= cpuc->event[0]->hw.config_base;
+}
+
+/* On this PMU each PIC has it's own PCR control register.  */
+static void calculate_multiple_pcrs(struct cpu_hw_events *cpuc)
+{
+	int i;
+
+	if (!cpuc->n_added)
+		goto out;
+
+	for (i = 0; i < cpuc->n_events; i++) {
+		struct perf_event *cp = cpuc->event[i];
+		struct hw_perf_event *hwc = &cp->hw;
+		int idx = hwc->idx;
+		u64 enc;
+
+		if (cpuc->current_idx[i] != PIC_NO_INDEX)
+			continue;
+
+		sparc_perf_event_set_period(cp, hwc, idx);
+		cpuc->current_idx[i] = idx;
+
+		enc = perf_event_get_enc(cpuc->events[i]);
+		cpuc->pcr[idx] &= ~mask_for_index(idx);
+		if (hwc->state & PERF_HES_STOPPED)
+			cpuc->pcr[idx] |= nop_for_index(idx);
+		else
+			cpuc->pcr[idx] |= event_encoding(enc, idx);
+	}
+out:
+	for (i = 0; i < cpuc->n_events; i++) {
+		struct perf_event *cp = cpuc->event[i];
+		int idx = cp->hw.idx;
+
+		cpuc->pcr[idx] |= cp->hw.config_base;
+	}
+}
+
+/* If performance event entries have been added, move existing events
+ * around (if necessary) and then assign new entries to counters.
+ */
+static void update_pcrs_for_enable(struct cpu_hw_events *cpuc)
+{
+	if (cpuc->n_added)
+		read_in_all_counters(cpuc);
+
+	if (sparc_pmu->num_pcrs == 1) {
+		calculate_single_pcr(cpuc);
+	} else {
+		calculate_multiple_pcrs(cpuc);
+	}
 }
 
 static void sparc_pmu_enable(struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 pcr;
+	int i;
 
 	if (cpuc->enabled)
 		return;
@@ -723,26 +1020,17 @@ static void sparc_pmu_enable(struct pmu *pmu)
 	cpuc->enabled = 1;
 	barrier();
 
-	pcr = cpuc->pcr;
-	if (!cpuc->n_events) {
-		pcr = 0;
-	} else {
-		pcr = maybe_change_configuration(cpuc, pcr);
-
-		/* We require that all of the events have the same
-		 * configuration, so just fetch the settings from the
-		 * first entry.
-		 */
-		cpuc->pcr = pcr | cpuc->event[0]->hw.config_base;
-	}
+	if (cpuc->n_events)
+		update_pcrs_for_enable(cpuc);
 
-	pcr_ops->write(cpuc->pcr);
+	for (i = 0; i < sparc_pmu->num_pcrs; i++)
+		pcr_ops->write_pcr(i, cpuc->pcr[i]);
 }
 
 static void sparc_pmu_disable(struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 val;
+	int i;
 
 	if (!cpuc->enabled)
 		return;
@@ -750,12 +1038,14 @@ static void sparc_pmu_disable(struct pmu *pmu)
 	cpuc->enabled = 0;
 	cpuc->n_added = 0;
 
-	val = cpuc->pcr;
-	val &= ~(PCR_UTRACE | PCR_STRACE |
-		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
-	cpuc->pcr = val;
+	for (i = 0; i < sparc_pmu->num_pcrs; i++) {
+		u64 val = cpuc->pcr[i];
 
-	pcr_ops->write(cpuc->pcr);
+		val &= ~(sparc_pmu->user_bit | sparc_pmu->priv_bit |
+			 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
+		cpuc->pcr[i] = val;
+		pcr_ops->write_pcr(i, cpuc->pcr[i]);
+	}
 }
 
 static int active_event_index(struct cpu_hw_events *cpuc,
@@ -854,9 +1144,11 @@ static DEFINE_MUTEX(pmc_grab_mutex);
 static void perf_stop_nmi_watchdog(void *unused)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int i;
 
 	stop_nmi_watchdog(NULL);
-	cpuc->pcr = pcr_ops->read();
+	for (i = 0; i < sparc_pmu->num_pcrs; i++)
+		cpuc->pcr[i] = pcr_ops->read_pcr(i);
 }
 
 void perf_event_grab_pmc(void)
@@ -942,9 +1234,17 @@ static int sparc_check_constraints(struct perf_event **evts,
 	if (!n_ev)
 		return 0;
 
-	if (n_ev > MAX_HWEVENTS)
+	if (n_ev > sparc_pmu->max_hw_events)
 		return -1;
 
+	if (!(sparc_pmu->flags & SPARC_PMU_HAS_CONFLICTS)) {
+		int i;
+
+		for (i = 0; i < n_ev; i++)
+			evts[i]->hw.idx = i;
+		return 0;
+	}
+
 	msk0 = perf_event_get_msk(events[0]);
 	if (n_ev == 1) {
 		if (msk0 & PIC_LOWER)
@@ -1000,6 +1300,9 @@ static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
 	struct perf_event *event;
 	int i, n, first;
 
+	if (!(sparc_pmu->flags & SPARC_PMU_ALL_EXCLUDES_SAME))
+		return 0;
+
 	n = n_prev + n_new;
 	if (n <= 1)
 		return 0;
@@ -1059,7 +1362,7 @@ static int sparc_pmu_add(struct perf_event *event, int ef_flags)
 	perf_pmu_disable(event->pmu);
 
 	n0 = cpuc->n_events;
-	if (n0 >= MAX_HWEVENTS)
+	if (n0 >= sparc_pmu->max_hw_events)
 		goto out;
 
 	cpuc->event[n0] = event;
@@ -1146,16 +1449,16 @@ static int sparc_pmu_event_init(struct perf_event *event)
 	/* We save the enable bits in the config_base.  */
 	hwc->config_base = sparc_pmu->irq_bit;
 	if (!attr->exclude_user)
-		hwc->config_base |= PCR_UTRACE;
+		hwc->config_base |= sparc_pmu->user_bit;
 	if (!attr->exclude_kernel)
-		hwc->config_base |= PCR_STRACE;
+		hwc->config_base |= sparc_pmu->priv_bit;
 	if (!attr->exclude_hv)
 		hwc->config_base |= sparc_pmu->hv_bit;
 
 	n = 0;
 	if (event->group_leader != event) {
 		n = collect_events(event->group_leader,
-				   MAX_HWEVENTS - 1,
+				   sparc_pmu->max_hw_events - 1,
 				   evts, events, current_idx_dmy);
 		if (n < 0)
 			return -EINVAL;
@@ -1254,8 +1557,7 @@ static struct pmu pmu = {
 void perf_event_print_debug(void)
 {
 	unsigned long flags;
-	u64 pcr, pic;
-	int cpu;
+	int cpu, i;
 
 	if (!sparc_pmu)
 		return;
@@ -1264,12 +1566,13 @@ void perf_event_print_debug(void)
 
 	cpu = smp_processor_id();
 
-	pcr = pcr_ops->read();
-	read_pic(pic);
-
 	pr_info("\n");
-	pr_info("CPU#%d: PCR[%016llx] PIC[%016llx]\n",
-		cpu, pcr, pic);
+	for (i = 0; i < sparc_pmu->num_pcrs; i++)
+		pr_info("CPU#%d: PCR%d[%016llx]\n",
+			cpu, i, pcr_ops->read_pcr(i));
+	for (i = 0; i < sparc_pmu->num_pic_regs; i++)
+		pr_info("CPU#%d: PIC%d[%016llx]\n",
+			cpu, i, pcr_ops->read_pic(i));
 
 	local_irq_restore(flags);
 }
@@ -1305,8 +1608,9 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
 	 * Do this before we peek at the counters to determine
 	 * overflow so we don't lose any events.
 	 */
-	if (sparc_pmu->irq_bit)
-		pcr_ops->write(cpuc->pcr);
+	if (sparc_pmu->irq_bit &&
+	    sparc_pmu->num_pcrs == 1)
+		pcr_ops->write_pcr(0, cpuc->pcr[0]);
 
 	for (i = 0; i < cpuc->n_events; i++) {
 		struct perf_event *event = cpuc->event[i];
@@ -1314,6 +1618,10 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
 		struct hw_perf_event *hwc;
 		u64 val;
 
+		if (sparc_pmu->irq_bit &&
+		    sparc_pmu->num_pcrs > 1)
+			pcr_ops->write_pcr(idx, cpuc->pcr[idx]);
+
 		hwc = &event->hw;
 		val = sparc_perf_event_update(event, hwc, idx);
 		if (val & (1ULL << 31))
@@ -1352,6 +1660,10 @@ static bool __init supported_pmu(void)
 		sparc_pmu = &niagara2_pmu;
 		return true;
 	}
+	if (!strcmp(sparc_pmu_type, "niagara4")) {
+		sparc_pmu = &niagara4_pmu;
+		return true;
+	}
 	return false;
 }
 
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index 340c5b976d28..d397d7fc5c28 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -37,7 +37,7 @@ void * __init prom_early_alloc(unsigned long size)
 	void *ret;
 
 	if (!paddr) {
-		prom_printf("prom_early_alloc(%lu) failed\n");
+		prom_printf("prom_early_alloc(%lu) failed\n", size);
 		prom_halt();
 	}
 
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 1414d16712b2..0800e71d8a88 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -340,7 +340,12 @@ static const char *hwcaps[] = {
 	 */
 	"mul32", "div32", "fsmuld", "v8plus", "popc", "vis", "vis2",
 	"ASIBlkInit", "fmaf", "vis3", "hpc", "random", "trans", "fjfmau",
-	"ima", "cspare",
+	"ima", "cspare", "pause", "cbcond",
+};
+
+static const char *crypto_hwcaps[] = {
+	"aes", "des", "kasumi", "camellia", "md5", "sha1", "sha256",
+	"sha512", "mpmul", "montmul", "montsqr", "crc32c",
 };
 
 void cpucap_info(struct seq_file *m)
@@ -357,27 +362,61 @@ void cpucap_info(struct seq_file *m)
 			printed++;
 		}
 	}
+	if (caps & HWCAP_SPARC_CRYPTO) {
+		unsigned long cfr;
+
+		__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+		for (i = 0; i < ARRAY_SIZE(crypto_hwcaps); i++) {
+			unsigned long bit = 1UL << i;
+			if (cfr & bit) {
+				seq_printf(m, "%s%s",
+					   printed ? "," : "", crypto_hwcaps[i]);
+				printed++;
+			}
+		}
+	}
 	seq_putc(m, '\n');
 }
 
+static void __init report_one_hwcap(int *printed, const char *name)
+{
+	if ((*printed) == 0)
+		printk(KERN_INFO "CPU CAPS: [");
+	printk(KERN_CONT "%s%s",
+	       (*printed) ? "," : "", name);
+	if (++(*printed) == 8) {
+		printk(KERN_CONT "]\n");
+		*printed = 0;
+	}
+}
+
+static void __init report_crypto_hwcaps(int *printed)
+{
+	unsigned long cfr;
+	int i;
+
+	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
+
+	for (i = 0; i < ARRAY_SIZE(crypto_hwcaps); i++) {
+		unsigned long bit = 1UL << i;
+		if (cfr & bit)
+			report_one_hwcap(printed, crypto_hwcaps[i]);
+	}
+}
+
 static void __init report_hwcaps(unsigned long caps)
 {
 	int i, printed = 0;
 
-	printk(KERN_INFO "CPU CAPS: [");
 	for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 		unsigned long bit = 1UL << i;
-		if (caps & bit) {
-			printk(KERN_CONT "%s%s",
-			       printed ? "," : "", hwcaps[i]);
-			if (++printed == 8) {
-				printk(KERN_CONT "]\n");
-				printk(KERN_INFO "CPU CAPS: [");
-				printed = 0;
-			}
-		}
+		if (caps & bit)
+			report_one_hwcap(&printed, hwcaps[i]);
 	}
-	printk(KERN_CONT "]\n");
+	if (caps & HWCAP_SPARC_CRYPTO)
+		report_crypto_hwcaps(&printed);
+	if (printed != 0)
+		printk(KERN_CONT "]\n");
 }
 
 static unsigned long __init mdesc_cpu_hwcap_list(void)
@@ -411,6 +450,10 @@ static unsigned long __init mdesc_cpu_hwcap_list(void)
 				break;
 			}
 		}
+		for (i = 0; i < ARRAY_SIZE(crypto_hwcaps); i++) {
+			if (!strcmp(prop, crypto_hwcaps[i]))
+				caps |= HWCAP_SPARC_CRYPTO;
+		}
 
 		plen = strlen(prop) + 1;
 		prop += plen;
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index a53e0a5fd3a3..53e48f721ce3 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -54,58 +54,6 @@ struct signal_frame32 {
 	/* __siginfo_rwin_t * */u32 rwin_save;
 } __attribute__((aligned(8)));
 
-typedef struct compat_siginfo{
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[SI_PAD_SIZE32];
-
-		/* kill() */
-		struct {
-			compat_pid_t _pid;		/* sender's pid */
-			unsigned int _uid;		/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;			/* timer id */
-			int _overrun;			/* overrun count */
-			compat_sigval_t _sigval;		/* same as below */
-			int _sys_private;		/* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			compat_pid_t _pid;		/* sender's pid */
-			unsigned int _uid;		/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			compat_pid_t _pid;		/* which child */
-			unsigned int _uid;		/* sender's uid */
-			int _status;			/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */
-		struct {
-			u32 _addr; /* faulting insn/memory ref. */
-			int _trapno;
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-}compat_siginfo_t;
-
 struct rt_signal_frame32 {
 	struct sparc_stackf32	ss;
 	compat_siginfo_t	info;
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index d97f3eb72e06..44025f4ba41f 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -90,7 +90,7 @@ SIGN1(sys32_mkdir, sys_mkdir, %o1)
 SIGN3(sys32_futex, compat_sys_futex, %o1, %o2, %o5)
 SIGN1(sys32_sysfs, compat_sys_sysfs, %o0)
 SIGN2(sys32_sendfile, compat_sys_sendfile, %o0, %o1)
-SIGN2(sys32_sendfile64, compat_sys_sendfile64, %o0, %o1)
+SIGN2(sys32_sendfile64, sys_sendfile, %o0, %o1)
 SIGN1(sys32_prctl, sys_prctl, %o0)
 SIGN1(sys32_sched_rr_get_interval, compat_sys_sched_rr_get_interval, %o0)
 SIGN2(sys32_waitpid, sys_waitpid, %o0, %o2)
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index f7392336961f..d862499eb01c 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -506,52 +506,6 @@ long compat_sys_fadvise64_64(int fd,
 				advice);
 }
 
-asmlinkage long compat_sys_sendfile(int out_fd, int in_fd,
-				    compat_off_t __user *offset,
-				    compat_size_t count)
-{
-	mm_segment_t old_fs = get_fs();
-	int ret;
-	off_t of;
-	
-	if (offset && get_user(of, offset))
-		return -EFAULT;
-		
-	set_fs(KERNEL_DS);
-	ret = sys_sendfile(out_fd, in_fd,
-			   offset ? (off_t __user *) &of : NULL,
-			   count);
-	set_fs(old_fs);
-	
-	if (offset && put_user(of, offset))
-		return -EFAULT;
-		
-	return ret;
-}
-
-asmlinkage long compat_sys_sendfile64(int out_fd, int in_fd,
-				      compat_loff_t __user *offset,
-				      compat_size_t count)
-{
-	mm_segment_t old_fs = get_fs();
-	int ret;
-	loff_t lof;
-	
-	if (offset && get_user(lof, offset))
-		return -EFAULT;
-		
-	set_fs(KERNEL_DS);
-	ret = sys_sendfile64(out_fd, in_fd,
-			     offset ? (loff_t __user *) &lof : NULL,
-			     count);
-	set_fs(old_fs);
-	
-	if (offset && put_user(lof, offset))
-		return -EFAULT;
-		
-	return ret;
-}
-
 /* This is just a version for 32-bit applications which does
  * not force O_LARGEFILE on.
  */
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 0dc1f5786081..11c6c9603e71 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -502,12 +502,12 @@ SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
 	int ret;
 
-	if (current->personality == PER_LINUX32 &&
-	    personality == PER_LINUX)
-		personality = PER_LINUX32;
+	if (personality(current->personality) == PER_LINUX32 &&
+	    personality(personality) == PER_LINUX)
+		personality |= PER_LINUX32;
 	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	if (personality(ret) == PER_LINUX32)
+		ret &= ~PER_LINUX32;
 
 	return ret;
 }
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 3b05e6697710..fa1f1d375ffc 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -850,7 +850,7 @@ void __init cheetah_ecache_flush_init(void)
 	ecache_flush_physbase = find_ecache_flush_span(ecache_flush_size);
 
 	if (ecache_flush_physbase == ~0UL) {
-		prom_printf("cheetah_ecache_flush_init: Cannot find %d byte "
+		prom_printf("cheetah_ecache_flush_init: Cannot find %ld byte "
 			    "contiguous physical memory.\n",
 			    ecache_flush_size);
 		prom_halt();
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index dff4096f3dec..30f6ab51c551 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -32,6 +32,9 @@ lib-$(CONFIG_SPARC64) += NGpatch.o NGpage.o NGbzero.o
 lib-$(CONFIG_SPARC64) += NG2memcpy.o NG2copy_from_user.o NG2copy_to_user.o
 lib-$(CONFIG_SPARC64) +=  NG2patch.o
 
+lib-$(CONFIG_SPARC64) += NG4memcpy.o NG4copy_from_user.o NG4copy_to_user.o
+lib-$(CONFIG_SPARC64) +=  NG4patch.o NG4copy_page.o
+
 lib-$(CONFIG_SPARC64) += GENmemcpy.o GENcopy_from_user.o GENcopy_to_user.o
 lib-$(CONFIG_SPARC64) += GENpatch.o GENpage.o GENbzero.o
 
diff --git a/arch/sparc/lib/NG2memcpy.S b/arch/sparc/lib/NG2memcpy.S
index 03eadf66b0d3..2c20ad63ddbf 100644
--- a/arch/sparc/lib/NG2memcpy.S
+++ b/arch/sparc/lib/NG2memcpy.S
@@ -14,7 +14,7 @@
 #define FPRS_FEF  0x04
 #ifdef MEMCPY_DEBUG
 #define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs; \
-		     clr %g1; clr %g2; clr %g3; subcc %g0, %g0, %g0;
+		     clr %g1; clr %g2; clr %g3; clr %g5; subcc %g0, %g0, %g0;
 #define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
 #else
 #define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs
@@ -182,13 +182,13 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	cmp		%g2, 0
 	tne		%xcc, 5
 	PREAMBLE
-	mov		%o0, GLOBAL_SPARE
+	mov		%o0, %o3
 	cmp		%o2, 0
 	be,pn		%XCC, 85f
-	 or		%o0, %o1, %o3
+	 or		%o0, %o1, GLOBAL_SPARE
 	cmp		%o2, 16
 	blu,a,pn	%XCC, 80f
-	 or		%o3, %o2, %o3
+	 or		GLOBAL_SPARE, %o2, GLOBAL_SPARE
 
 	/* 2 blocks (128 bytes) is the minimum we can do the block
 	 * copy with.  We need to ensure that we'll iterate at least
@@ -202,7 +202,7 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 */
 	cmp		%o2, (4 * 64)
 	blu,pt		%XCC, 75f
-	 andcc		%o3, 0x7, %g0
+	 andcc		GLOBAL_SPARE, 0x7, %g0
 
 	/* %o0:	dst
 	 * %o1:	src
@@ -404,13 +404,13 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 * over. If anything is left, we copy it one byte at a time.
 	 */
 	brz,pt		%o2, 85f
-	 sub		%o0, %o1, %o3
+	 sub		%o0, %o1, GLOBAL_SPARE
 	ba,a,pt		%XCC, 90f
 
 	.align		64
 75: /* 16 < len <= 64 */
 	bne,pn		%XCC, 75f
-	 sub		%o0, %o1, %o3
+	 sub		%o0, %o1, GLOBAL_SPARE
 
 72:
 	andn		%o2, 0xf, %o4
@@ -420,9 +420,9 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	add		%o1, 0x08, %o1
 	EX_LD(LOAD(ldx, %o1, %g1))
 	sub		%o1, 0x08, %o1
-	EX_ST(STORE(stx, %o5, %o1 + %o3))
+	EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE))
 	add		%o1, 0x8, %o1
-	EX_ST(STORE(stx, %g1, %o1 + %o3))
+	EX_ST(STORE(stx, %g1, %o1 + GLOBAL_SPARE))
 	bgu,pt		%XCC, 1b
 	 add		%o1, 0x8, %o1
 73:	andcc		%o2, 0x8, %g0
@@ -430,14 +430,14 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 nop
 	sub		%o2, 0x8, %o2
 	EX_LD(LOAD(ldx, %o1, %o5))
-	EX_ST(STORE(stx, %o5, %o1 + %o3))
+	EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE))
 	add		%o1, 0x8, %o1
 1:	andcc		%o2, 0x4, %g0
 	be,pt		%XCC, 1f
 	 nop
 	sub		%o2, 0x4, %o2
 	EX_LD(LOAD(lduw, %o1, %o5))
-	EX_ST(STORE(stw, %o5, %o1 + %o3))
+	EX_ST(STORE(stw, %o5, %o1 + GLOBAL_SPARE))
 	add		%o1, 0x4, %o1
 1:	cmp		%o2, 0
 	be,pt		%XCC, 85f
@@ -454,11 +454,11 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 1:	subcc		%g1, 1, %g1
 	EX_LD(LOAD(ldub, %o1, %o5))
-	EX_ST(STORE(stb, %o5, %o1 + %o3))
+	EX_ST(STORE(stb, %o5, %o1 + GLOBAL_SPARE))
 	bgu,pt		%icc, 1b
 	 add		%o1, 1, %o1
 
-2:	add		%o1, %o3, %o0
+2:	add		%o1, GLOBAL_SPARE, %o0
 	andcc		%o1, 0x7, %g1
 	bne,pt		%icc, 8f
 	 sll		%g1, 3, %g1
@@ -468,16 +468,16 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 nop
 	ba,a,pt		%xcc, 73b
 
-8:	mov		64, %o3
+8:	mov		64, GLOBAL_SPARE
 	andn		%o1, 0x7, %o1
 	EX_LD(LOAD(ldx, %o1, %g2))
-	sub		%o3, %g1, %o3
+	sub		GLOBAL_SPARE, %g1, GLOBAL_SPARE
 	andn		%o2, 0x7, %o4
 	sllx		%g2, %g1, %g2
 1:	add		%o1, 0x8, %o1
 	EX_LD(LOAD(ldx, %o1, %g3))
 	subcc		%o4, 0x8, %o4
-	srlx		%g3, %o3, %o5
+	srlx		%g3, GLOBAL_SPARE, %o5
 	or		%o5, %g2, %o5
 	EX_ST(STORE(stx, %o5, %o0))
 	add		%o0, 0x8, %o0
@@ -489,32 +489,32 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	be,pn		%icc, 85f
 	 add		%o1, %g1, %o1
 	ba,pt		%xcc, 90f
-	 sub		%o0, %o1, %o3
+	 sub		%o0, %o1, GLOBAL_SPARE
 
 	.align		64
 80: /* 0 < len <= 16 */
-	andcc		%o3, 0x3, %g0
+	andcc		GLOBAL_SPARE, 0x3, %g0
 	bne,pn		%XCC, 90f
-	 sub		%o0, %o1, %o3
+	 sub		%o0, %o1, GLOBAL_SPARE
 
 1:
 	subcc		%o2, 4, %o2
 	EX_LD(LOAD(lduw, %o1, %g1))
-	EX_ST(STORE(stw, %g1, %o1 + %o3))
+	EX_ST(STORE(stw, %g1, %o1 + GLOBAL_SPARE))
 	bgu,pt		%XCC, 1b
 	 add		%o1, 4, %o1
 
 85:	retl
-	 mov		EX_RETVAL(GLOBAL_SPARE), %o0
+	 mov		EX_RETVAL(%o3), %o0
 
 	.align		32
 90:
 	subcc		%o2, 1, %o2
 	EX_LD(LOAD(ldub, %o1, %g1))
-	EX_ST(STORE(stb, %g1, %o1 + %o3))
+	EX_ST(STORE(stb, %g1, %o1 + GLOBAL_SPARE))
 	bgu,pt		%XCC, 90b
 	 add		%o1, 1, %o1
 	retl
-	 mov		EX_RETVAL(GLOBAL_SPARE), %o0
+	 mov		EX_RETVAL(%o3), %o0
 
 	.size		FUNC_NAME, .-FUNC_NAME
diff --git a/arch/sparc/lib/NG4copy_from_user.S b/arch/sparc/lib/NG4copy_from_user.S
new file mode 100644
index 000000000000..fd9f903ffa32
--- /dev/null
+++ b/arch/sparc/lib/NG4copy_from_user.S
@@ -0,0 +1,30 @@
+/* NG4copy_from_user.S: Niagara-4 optimized copy from userspace.
+ *
+ * Copyright (C) 2012 David S. Miller (davem@davemloft.net)
+ */
+
+#define EX_LD(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi;\
+	.text;			\
+	.align 4;
+
+#ifndef ASI_AIUS
+#define ASI_AIUS	0x11
+#endif
+
+#define FUNC_NAME		NG4copy_from_user
+#define LOAD(type,addr,dest)	type##a [addr] %asi, dest
+#define EX_RETVAL(x)		0
+
+#ifdef __KERNEL__
+#define PREAMBLE					\
+	rd		%asi, %g1;			\
+	cmp		%g1, ASI_AIUS;			\
+	bne,pn		%icc, ___copy_in_user;		\
+	 nop
+#endif
+
+#include "NG4memcpy.S"
diff --git a/arch/sparc/lib/NG4copy_page.S b/arch/sparc/lib/NG4copy_page.S
new file mode 100644
index 000000000000..f30ec10bbcac
--- /dev/null
+++ b/arch/sparc/lib/NG4copy_page.S
@@ -0,0 +1,57 @@
+/* NG4copy_page.S: Niagara-4 optimized copy page.
+ *
+ * Copyright (C) 2012 (davem@davemloft.net)
+ */
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+	.text
+	.align		32
+
+	.register	%g2, #scratch
+	.register	%g3, #scratch
+
+	.globl		NG4copy_user_page
+NG4copy_user_page:	/* %o0=dest, %o1=src, %o2=vaddr */
+	prefetch	[%o1 + 0x000], #n_reads_strong
+	prefetch	[%o1 + 0x040], #n_reads_strong
+	prefetch	[%o1 + 0x080], #n_reads_strong
+	prefetch	[%o1 + 0x0c0], #n_reads_strong
+	set		PAGE_SIZE, %g7
+	prefetch	[%o1 + 0x100], #n_reads_strong
+	prefetch	[%o1 + 0x140], #n_reads_strong
+	prefetch	[%o1 + 0x180], #n_reads_strong
+	prefetch	[%o1 + 0x1c0], #n_reads_strong
+1:
+	ldx		[%o1 + 0x00], %o2
+	subcc		%g7, 0x40, %g7
+	ldx		[%o1 + 0x08], %o3
+	ldx		[%o1 + 0x10], %o4
+	ldx		[%o1 + 0x18], %o5
+	ldx		[%o1 + 0x20], %g1
+	stxa		%o2, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	ldx		[%o1 + 0x28], %g2
+	stxa		%o3, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	ldx		[%o1 + 0x30], %g3
+	stxa		%o4, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	ldx		[%o1 + 0x38], %o2
+	add		%o1, 0x40, %o1
+	stxa		%o5, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	stxa		%g1, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	stxa		%g2, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	stxa		%g3, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	stxa		%o2, [%o0] ASI_BLK_INIT_QUAD_LDD_P
+	add		%o0, 0x08, %o0
+	bne,pt		%icc, 1b
+	 prefetch	[%o1 + 0x200], #n_reads_strong
+	retl
+	 membar		#StoreLoad | #StoreStore
+	.size		NG4copy_user_page,.-NG4copy_user_page
diff --git a/arch/sparc/lib/NG4copy_to_user.S b/arch/sparc/lib/NG4copy_to_user.S
new file mode 100644
index 000000000000..9744c4540a8d
--- /dev/null
+++ b/arch/sparc/lib/NG4copy_to_user.S
@@ -0,0 +1,39 @@
+/* NG4copy_to_user.S: Niagara-4 optimized copy to userspace.
+ *
+ * Copyright (C) 2012 David S. Miller (davem@davemloft.net)
+ */
+
+#define EX_ST(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi;\
+	.text;			\
+	.align 4;
+
+#ifndef ASI_AIUS
+#define ASI_AIUS	0x11
+#endif
+
+#ifndef ASI_BLK_INIT_QUAD_LDD_AIUS
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23
+#endif
+
+#define FUNC_NAME		NG4copy_to_user
+#define STORE(type,src,addr)	type##a src, [addr] %asi
+#define STORE_ASI		ASI_BLK_INIT_QUAD_LDD_AIUS
+#define EX_RETVAL(x)		0
+
+#ifdef __KERNEL__
+	/* Writing to %asi is _expensive_ so we hardcode it.
+	 * Reading %asi to check for KERNEL_DS is comparatively
+	 * cheap.
+	 */
+#define PREAMBLE					\
+	rd		%asi, %g1;			\
+	cmp		%g1, ASI_AIUS;			\
+	bne,pn		%icc, ___copy_in_user;		\
+	 nop
+#endif
+
+#include "NG4memcpy.S"
diff --git a/arch/sparc/lib/NG4memcpy.S b/arch/sparc/lib/NG4memcpy.S
new file mode 100644
index 000000000000..9cf2ee01cee3
--- /dev/null
+++ b/arch/sparc/lib/NG4memcpy.S
@@ -0,0 +1,360 @@
+/* NG4memcpy.S: Niagara-4 optimized memcpy.
+ *
+ * Copyright (C) 2012 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef __KERNEL__
+#include <asm/visasm.h>
+#include <asm/asi.h>
+#define GLOBAL_SPARE	%g7
+#else
+#define ASI_BLK_INIT_QUAD_LDD_P 0xe2
+#define FPRS_FEF  0x04
+
+/* On T4 it is very expensive to access ASRs like %fprs and
+ * %asi, avoiding a read or a write can save ~50 cycles.
+ */
+#define FPU_ENTER			\
+	rd	%fprs, %o5;		\
+	andcc	%o5, FPRS_FEF, %g0;	\
+	be,a,pn	%icc, 999f;		\
+	 wr	%g0, FPRS_FEF, %fprs;	\
+	999:
+
+#ifdef MEMCPY_DEBUG
+#define VISEntryHalf FPU_ENTER; \
+		     clr %g1; clr %g2; clr %g3; clr %g5; subcc %g0, %g0, %g0;
+#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
+#else
+#define VISEntryHalf FPU_ENTER
+#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
+#endif
+
+#define GLOBAL_SPARE	%g5
+#endif
+
+#ifndef STORE_ASI
+#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA
+#define STORE_ASI	ASI_BLK_INIT_QUAD_LDD_P
+#else
+#define STORE_ASI	0x80		/* ASI_P */
+#endif
+#endif
+
+#ifndef EX_LD
+#define EX_LD(x)	x
+#endif
+
+#ifndef EX_ST
+#define EX_ST(x)	x
+#endif
+
+#ifndef EX_RETVAL
+#define EX_RETVAL(x)	x
+#endif
+
+#ifndef LOAD
+#define LOAD(type,addr,dest)	type [addr], dest
+#endif
+
+#ifndef STORE
+#ifndef MEMCPY_DEBUG
+#define STORE(type,src,addr)	type src, [addr]
+#else
+#define STORE(type,src,addr)	type##a src, [addr] %asi
+#endif
+#endif
+
+#ifndef STORE_INIT
+#define STORE_INIT(src,addr)	stxa src, [addr] STORE_ASI
+#endif
+
+#ifndef FUNC_NAME
+#define FUNC_NAME	NG4memcpy
+#endif
+#ifndef PREAMBLE
+#define PREAMBLE
+#endif
+
+#ifndef XCC
+#define XCC xcc
+#endif
+
+	.register	%g2,#scratch
+	.register	%g3,#scratch
+
+	.text
+	.align		64
+
+	.globl	FUNC_NAME
+	.type	FUNC_NAME,#function
+FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
+#ifdef MEMCPY_DEBUG
+	wr		%g0, 0x80, %asi
+#endif
+	srlx		%o2, 31, %g2
+	cmp		%g2, 0
+	tne		%XCC, 5
+	PREAMBLE
+	mov		%o0, %o3
+	brz,pn		%o2, .Lexit
+	 cmp		%o2, 3
+	ble,pn		%icc, .Ltiny
+	 cmp		%o2, 19
+	ble,pn		%icc, .Lsmall
+	 or		%o0, %o1, %g2
+	cmp		%o2, 128
+	bl,pn		%icc, .Lmedium
+	 nop
+
+.Llarge:/* len >= 0x80 */
+	/* First get dest 8 byte aligned.  */
+	sub		%g0, %o0, %g1
+	and		%g1, 0x7, %g1
+	brz,pt		%g1, 51f
+	 sub		%o2, %g1, %o2
+
+1:	EX_LD(LOAD(ldub, %o1 + 0x00, %g2))
+	add		%o1, 1, %o1
+	subcc		%g1, 1, %g1
+	add		%o0, 1, %o0
+	bne,pt		%icc, 1b
+	 EX_ST(STORE(stb, %g2, %o0 - 0x01))
+
+51:	LOAD(prefetch, %o1 + 0x040, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x080, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x0c0, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x100, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x140, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x180, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x1c0, #n_reads_strong)
+	LOAD(prefetch, %o1 + 0x200, #n_reads_strong)
+
+	/* Check if we can use the straight fully aligned
+	 * loop, or we require the alignaddr/faligndata variant.
+	 */
+	andcc		%o1, 0x7, %o5
+	bne,pn		%icc, .Llarge_src_unaligned
+	 sub		%g0, %o0, %g1
+
+	/* Legitimize the use of initializing stores by getting dest
+	 * to be 64-byte aligned.
+	 */
+	and		%g1, 0x3f, %g1
+	brz,pt		%g1, .Llarge_aligned
+	 sub		%o2, %g1, %o2
+
+1:	EX_LD(LOAD(ldx, %o1 + 0x00, %g2))
+	add		%o1, 8, %o1
+	subcc		%g1, 8, %g1
+	add		%o0, 8, %o0
+	bne,pt		%icc, 1b
+	 EX_ST(STORE(stx, %g2, %o0 - 0x08))
+
+.Llarge_aligned:
+	/* len >= 0x80 && src 8-byte aligned && dest 8-byte aligned */
+	andn		%o2, 0x3f, %o4
+	sub		%o2, %o4, %o2
+
+1:	EX_LD(LOAD(ldx, %o1 + 0x00, %g1))
+	add		%o1, 0x40, %o1
+	EX_LD(LOAD(ldx, %o1 - 0x38, %g2))
+	subcc		%o4, 0x40, %o4
+	EX_LD(LOAD(ldx, %o1 - 0x30, %g3))
+	EX_LD(LOAD(ldx, %o1 - 0x28, GLOBAL_SPARE))
+	EX_LD(LOAD(ldx, %o1 - 0x20, %o5))
+	EX_ST(STORE_INIT(%g1, %o0))
+	add		%o0, 0x08, %o0
+	EX_ST(STORE_INIT(%g2, %o0))
+	add		%o0, 0x08, %o0
+	EX_LD(LOAD(ldx, %o1 - 0x18, %g2))
+	EX_ST(STORE_INIT(%g3, %o0))
+	add		%o0, 0x08, %o0
+	EX_LD(LOAD(ldx, %o1 - 0x10, %g3))
+	EX_ST(STORE_INIT(GLOBAL_SPARE, %o0))
+	add		%o0, 0x08, %o0
+	EX_LD(LOAD(ldx, %o1 - 0x08, GLOBAL_SPARE))
+	EX_ST(STORE_INIT(%o5, %o0))
+	add		%o0, 0x08, %o0
+	EX_ST(STORE_INIT(%g2, %o0))
+	add		%o0, 0x08, %o0
+	EX_ST(STORE_INIT(%g3, %o0))
+	add		%o0, 0x08, %o0
+	EX_ST(STORE_INIT(GLOBAL_SPARE, %o0))
+	add		%o0, 0x08, %o0
+	bne,pt		%icc, 1b
+	 LOAD(prefetch, %o1 + 0x200, #n_reads_strong)
+
+	membar		#StoreLoad | #StoreStore
+
+	brz,pn		%o2, .Lexit
+	 cmp		%o2, 19
+	ble,pn		%icc, .Lsmall_unaligned
+	 nop
+	ba,a,pt		%icc, .Lmedium_noprefetch
+
+.Lexit:	retl
+	 mov		EX_RETVAL(%o3), %o0
+
+.Llarge_src_unaligned:
+	andn		%o2, 0x3f, %o4
+	sub		%o2, %o4, %o2
+	VISEntryHalf
+	alignaddr	%o1, %g0, %g1
+	add		%o1, %o4, %o1
+	EX_LD(LOAD(ldd, %g1 + 0x00, %f0))
+1:	EX_LD(LOAD(ldd, %g1 + 0x08, %f2))
+	subcc		%o4, 0x40, %o4
+	EX_LD(LOAD(ldd, %g1 + 0x10, %f4))
+	EX_LD(LOAD(ldd, %g1 + 0x18, %f6))
+	EX_LD(LOAD(ldd, %g1 + 0x20, %f8))
+	EX_LD(LOAD(ldd, %g1 + 0x28, %f10))
+	EX_LD(LOAD(ldd, %g1 + 0x30, %f12))
+	EX_LD(LOAD(ldd, %g1 + 0x38, %f14))
+	faligndata	%f0, %f2, %f16
+	EX_LD(LOAD(ldd, %g1 + 0x40, %f0))
+	faligndata	%f2, %f4, %f18
+	add		%g1, 0x40, %g1
+	faligndata	%f4, %f6, %f20
+	faligndata	%f6, %f8, %f22
+	faligndata	%f8, %f10, %f24
+	faligndata	%f10, %f12, %f26
+	faligndata	%f12, %f14, %f28
+	faligndata	%f14, %f0, %f30
+	EX_ST(STORE(std, %f16, %o0 + 0x00))
+	EX_ST(STORE(std, %f18, %o0 + 0x08))
+	EX_ST(STORE(std, %f20, %o0 + 0x10))
+	EX_ST(STORE(std, %f22, %o0 + 0x18))
+	EX_ST(STORE(std, %f24, %o0 + 0x20))
+	EX_ST(STORE(std, %f26, %o0 + 0x28))
+	EX_ST(STORE(std, %f28, %o0 + 0x30))
+	EX_ST(STORE(std, %f30, %o0 + 0x38))
+	add		%o0, 0x40, %o0
+	bne,pt		%icc, 1b
+	 LOAD(prefetch, %g1 + 0x200, #n_reads_strong)
+	VISExitHalf
+
+	brz,pn		%o2, .Lexit
+	 cmp		%o2, 19
+	ble,pn		%icc, .Lsmall_unaligned
+	 nop
+	ba,a,pt		%icc, .Lmedium_unaligned
+
+.Lmedium:
+	LOAD(prefetch, %o1 + 0x40, #n_reads_strong)
+	andcc		%g2, 0x7, %g0
+	bne,pn		%icc, .Lmedium_unaligned
+	 nop
+.Lmedium_noprefetch:
+	andncc		%o2, 0x20 - 1, %o5
+	be,pn		%icc, 2f
+	 sub		%o2, %o5, %o2
+1:	EX_LD(LOAD(ldx, %o1 + 0x00, %g1))
+	EX_LD(LOAD(ldx, %o1 + 0x08, %g2))
+	EX_LD(LOAD(ldx, %o1 + 0x10, GLOBAL_SPARE))
+	EX_LD(LOAD(ldx, %o1 + 0x18, %o4))
+	add		%o1, 0x20, %o1
+	subcc		%o5, 0x20, %o5
+	EX_ST(STORE(stx, %g1, %o0 + 0x00))
+	EX_ST(STORE(stx, %g2, %o0 + 0x08))
+	EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10))
+	EX_ST(STORE(stx, %o4, %o0 + 0x18))
+	bne,pt		%icc, 1b
+	 add		%o0, 0x20, %o0
+2:	andcc		%o2, 0x18, %o5
+	be,pt		%icc, 3f
+	 sub		%o2, %o5, %o2
+1:	EX_LD(LOAD(ldx, %o1 + 0x00, %g1))
+	add		%o1, 0x08, %o1
+	add		%o0, 0x08, %o0
+	subcc		%o5, 0x08, %o5
+	bne,pt		%icc, 1b
+	 EX_ST(STORE(stx, %g1, %o0 - 0x08))
+3:	brz,pt		%o2, .Lexit
+	 cmp		%o2, 0x04
+	bl,pn		%icc, .Ltiny
+	 nop
+	EX_LD(LOAD(lduw, %o1 + 0x00, %g1))
+	add		%o1, 0x04, %o1
+	add		%o0, 0x04, %o0
+	subcc		%o2, 0x04, %o2
+	bne,pn		%icc, .Ltiny
+	 EX_ST(STORE(stw, %g1, %o0 - 0x04))
+	ba,a,pt		%icc, .Lexit
+.Lmedium_unaligned:
+	/* First get dest 8 byte aligned.  */
+	sub		%g0, %o0, %g1
+	and		%g1, 0x7, %g1
+	brz,pt		%g1, 2f
+	 sub		%o2, %g1, %o2
+
+1:	EX_LD(LOAD(ldub, %o1 + 0x00, %g2))
+	add		%o1, 1, %o1
+	subcc		%g1, 1, %g1
+	add		%o0, 1, %o0
+	bne,pt		%icc, 1b
+	 EX_ST(STORE(stb, %g2, %o0 - 0x01))
+2:
+	and		%o1, 0x7, %g1
+	brz,pn		%g1, .Lmedium_noprefetch
+	 sll		%g1, 3, %g1
+	mov		64, %g2
+	sub		%g2, %g1, %g2
+	andn		%o1, 0x7, %o1
+	EX_LD(LOAD(ldx, %o1 + 0x00, %o4))
+	sllx		%o4, %g1, %o4
+	andn		%o2, 0x08 - 1, %o5
+	sub		%o2, %o5, %o2
+1:	EX_LD(LOAD(ldx, %o1 + 0x08, %g3))
+	add		%o1, 0x08, %o1
+	subcc		%o5, 0x08, %o5
+	srlx		%g3, %g2, GLOBAL_SPARE
+	or		GLOBAL_SPARE, %o4, GLOBAL_SPARE
+	EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x00))
+	add		%o0, 0x08, %o0
+	bne,pt		%icc, 1b
+	 sllx		%g3, %g1, %o4
+	srl		%g1, 3, %g1
+	add		%o1, %g1, %o1
+	brz,pn		%o2, .Lexit
+	 nop
+	ba,pt		%icc, .Lsmall_unaligned
+
+.Ltiny:
+	EX_LD(LOAD(ldub, %o1 + 0x00, %g1))
+	subcc		%o2, 1, %o2
+	be,pn		%icc, .Lexit
+	 EX_ST(STORE(stb, %g1, %o0 + 0x00))
+	EX_LD(LOAD(ldub, %o1 + 0x01, %g1))
+	subcc		%o2, 1, %o2
+	be,pn		%icc, .Lexit
+	 EX_ST(STORE(stb, %g1, %o0 + 0x01))
+	EX_LD(LOAD(ldub, %o1 + 0x02, %g1))
+	ba,pt		%icc, .Lexit
+	 EX_ST(STORE(stb, %g1, %o0 + 0x02))
+
+.Lsmall:
+	andcc		%g2, 0x3, %g0
+	bne,pn		%icc, .Lsmall_unaligned
+	 andn		%o2, 0x4 - 1, %o5
+	sub		%o2, %o5, %o2
+1:
+	EX_LD(LOAD(lduw, %o1 + 0x00, %g1))
+	add		%o1, 0x04, %o1
+	subcc		%o5, 0x04, %o5
+	add		%o0, 0x04, %o0
+	bne,pt		%icc, 1b
+	 EX_ST(STORE(stw, %g1, %o0 - 0x04))
+	brz,pt		%o2, .Lexit
+	 nop
+	ba,a,pt		%icc, .Ltiny
+
+.Lsmall_unaligned:
+1:	EX_LD(LOAD(ldub, %o1 + 0x00, %g1))
+	add		%o1, 1, %o1
+	add		%o0, 1, %o0
+	subcc		%o2, 1, %o2
+	bne,pt		%icc, 1b
+	 EX_ST(STORE(stb, %g1, %o0 - 0x01))
+	ba,a,pt		%icc, .Lexit
+	.size		FUNC_NAME, .-FUNC_NAME
diff --git a/arch/sparc/lib/NG4patch.S b/arch/sparc/lib/NG4patch.S
new file mode 100644
index 000000000000..c21c34c61dda
--- /dev/null
+++ b/arch/sparc/lib/NG4patch.S
@@ -0,0 +1,43 @@
+/* NG4patch.S: Patch Ultra-I routines with Niagara-4 variant.
+ *
+ * Copyright (C) 2012 David S. Miller <davem@davemloft.net>
+ */
+
+#define BRANCH_ALWAYS	0x10680000
+#define NOP		0x01000000
+#define NG_DO_PATCH(OLD, NEW)	\
+	sethi	%hi(NEW), %g1; \
+	or	%g1, %lo(NEW), %g1; \
+	sethi	%hi(OLD), %g2; \
+	or	%g2, %lo(OLD), %g2; \
+	sub	%g1, %g2, %g1; \
+	sethi	%hi(BRANCH_ALWAYS), %g3; \
+	sll	%g1, 11, %g1; \
+	srl	%g1, 11 + 2, %g1; \
+	or	%g3, %lo(BRANCH_ALWAYS), %g3; \
+	or	%g3, %g1, %g3; \
+	stw	%g3, [%g2]; \
+	sethi	%hi(NOP), %g3; \
+	or	%g3, %lo(NOP), %g3; \
+	stw	%g3, [%g2 + 0x4]; \
+	flush	%g2;
+
+	.globl	niagara4_patch_copyops
+	.type	niagara4_patch_copyops,#function
+niagara4_patch_copyops:
+	NG_DO_PATCH(memcpy, NG4memcpy)
+	NG_DO_PATCH(___copy_from_user, NG4copy_from_user)
+	NG_DO_PATCH(___copy_to_user, NG4copy_to_user)
+	retl
+	 nop
+	.size	niagara4_patch_copyops,.-niagara4_patch_copyops
+
+	.globl	niagara4_patch_pageops
+	.type	niagara4_patch_pageops,#function
+niagara4_patch_pageops:
+	NG_DO_PATCH(copy_user_page, NG4copy_user_page)
+	NG_DO_PATCH(_clear_page, NGclear_page)
+	NG_DO_PATCH(clear_user_page, NGclear_user_page)
+	retl
+	 nop
+	.size	niagara4_patch_pageops,.-niagara4_patch_pageops
diff --git a/arch/sparc/lib/NGpage.S b/arch/sparc/lib/NGpage.S
index b9e790b9c6b8..423d46e2258b 100644
--- a/arch/sparc/lib/NGpage.S
+++ b/arch/sparc/lib/NGpage.S
@@ -59,6 +59,8 @@ NGcopy_user_page:	/* %o0=dest, %o1=src, %o2=vaddr */
 	 restore
 
 	.align		32
+	.globl		NGclear_page
+	.globl		NGclear_user_page
 NGclear_page:		/* %o0=dest */
 NGclear_user_page:	/* %o0=dest, %o1=vaddr */
 	rd		%asi, %g3
diff --git a/arch/sparc/lib/ksyms.c b/arch/sparc/lib/ksyms.c
index 3b31218cafc6..ee31b884c61b 100644
--- a/arch/sparc/lib/ksyms.c
+++ b/arch/sparc/lib/ksyms.c
@@ -134,6 +134,10 @@ EXPORT_SYMBOL(copy_user_page);
 void VISenter(void);
 EXPORT_SYMBOL(VISenter);
 
+/* CRYPTO code needs this */
+void VISenterhalf(void);
+EXPORT_SYMBOL(VISenterhalf);
+
 extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
 extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
 		unsigned long *);
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 6026fdd1b2ed..7a9b788c6ced 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -51,22 +51,40 @@
 
 #include "init_64.h"
 
-unsigned long kern_linear_pte_xor[2] __read_mostly;
+unsigned long kern_linear_pte_xor[4] __read_mostly;
 
-/* A bitmap, one bit for every 256MB of physical memory.  If the bit
- * is clear, we should use a 4MB page (via kern_linear_pte_xor[0]) else
- * if set we should use a 256MB page (via kern_linear_pte_xor[1]).
+/* A bitmap, two bits for every 256MB of physical memory.  These two
+ * bits determine what page size we use for kernel linear
+ * translations.  They form an index into kern_linear_pte_xor[].  The
+ * value in the indexed slot is XOR'd with the TLB miss virtual
+ * address to form the resulting TTE.  The mapping is:
+ *
+ *	0	==>	4MB
+ *	1	==>	256MB
+ *	2	==>	2GB
+ *	3	==>	16GB
+ *
+ * All sun4v chips support 256MB pages.  Only SPARC-T4 and later
+ * support 2GB pages, and hopefully future cpus will support the 16GB
+ * pages as well.  For slots 2 and 3, we encode a 256MB TTE xor there
+ * if these larger page sizes are not supported by the cpu.
+ *
+ * It would be nice to determine this from the machine description
+ * 'cpu' properties, but we need to have this table setup before the
+ * MDESC is initialized.
  */
 unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
 
 #ifndef CONFIG_DEBUG_PAGEALLOC
-/* A special kernel TSB for 4MB and 256MB linear mappings.
- * Space is allocated for this right after the trap table
- * in arch/sparc64/kernel/head.S
+/* A special kernel TSB for 4MB, 256MB, 2GB and 16GB linear mappings.
+ * Space is allocated for this right after the trap table in
+ * arch/sparc64/kernel/head.S
  */
 extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES];
 #endif
 
+static unsigned long cpu_pgsz_mask;
+
 #define MAX_BANKS	32
 
 static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata;
@@ -101,7 +119,8 @@ static void __init read_obp_memory(const char *property,
 
 	ret = prom_getproperty(node, property, (char *) regs, prop_size);
 	if (ret == -1) {
-		prom_printf("Couldn't get %s property from /memory.\n");
+		prom_printf("Couldn't get %s property from /memory.\n",
+				property);
 		prom_halt();
 	}
 
@@ -403,6 +422,12 @@ EXPORT_SYMBOL(flush_icache_range);
 
 void mmu_info(struct seq_file *m)
 {
+	static const char *pgsz_strings[] = {
+		"8K", "64K", "512K", "4MB", "32MB",
+		"256MB", "2GB", "16GB",
+	};
+	int i, printed;
+
 	if (tlb_type == cheetah)
 		seq_printf(m, "MMU Type\t: Cheetah\n");
 	else if (tlb_type == cheetah_plus)
@@ -414,6 +439,17 @@ void mmu_info(struct seq_file *m)
 	else
 		seq_printf(m, "MMU Type\t: ???\n");
 
+	seq_printf(m, "MMU PGSZs\t: ");
+	printed = 0;
+	for (i = 0; i < ARRAY_SIZE(pgsz_strings); i++) {
+		if (cpu_pgsz_mask & (1UL << i)) {
+			seq_printf(m, "%s%s",
+				   printed ? "," : "", pgsz_strings[i]);
+			printed++;
+		}
+	}
+	seq_putc(m, '\n');
+
 #ifdef CONFIG_DEBUG_DCFLUSH
 	seq_printf(m, "DCPageFlushes\t: %d\n",
 		   atomic_read(&dcpage_flushes));
@@ -462,7 +498,7 @@ static void __init read_obp_translations(void)
 		prom_halt();
 	}
 	if (unlikely(n > sizeof(prom_trans))) {
-		prom_printf("prom_mappings: Size %Zd is too big.\n", n);
+		prom_printf("prom_mappings: Size %d is too big.\n", n);
 		prom_halt();
 	}
 
@@ -524,7 +560,7 @@ static void __init hypervisor_tlb_lock(unsigned long vaddr,
 	unsigned long ret = sun4v_mmu_map_perm_addr(vaddr, 0, pte, mmu);
 
 	if (ret != 0) {
-		prom_printf("hypervisor_tlb_lock[%lx:%lx:%lx:%lx]: "
+		prom_printf("hypervisor_tlb_lock[%lx:%x:%lx:%lx]: "
 			    "errors with %lx\n", vaddr, 0, pte, mmu, ret);
 		prom_halt();
 	}
@@ -1358,32 +1394,75 @@ static unsigned long __ref kernel_map_range(unsigned long pstart,
 extern unsigned int kvmap_linear_patch[1];
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
-static void __init mark_kpte_bitmap(unsigned long start, unsigned long end)
+static void __init kpte_set_val(unsigned long index, unsigned long val)
 {
-	const unsigned long shift_256MB = 28;
-	const unsigned long mask_256MB = ((1UL << shift_256MB) - 1UL);
-	const unsigned long size_256MB = (1UL << shift_256MB);
+	unsigned long *ptr = kpte_linear_bitmap;
 
-	while (start < end) {
-		long remains;
+	val <<= ((index % (BITS_PER_LONG / 2)) * 2);
+	ptr += (index / (BITS_PER_LONG / 2));
 
-		remains = end - start;
-		if (remains < size_256MB)
-			break;
+	*ptr |= val;
+}
 
-		if (start & mask_256MB) {
-			start = (start + size_256MB) & ~mask_256MB;
-			continue;
-		}
+static const unsigned long kpte_shift_min = 28; /* 256MB */
+static const unsigned long kpte_shift_max = 34; /* 16GB */
+static const unsigned long kpte_shift_incr = 3;
+
+static unsigned long kpte_mark_using_shift(unsigned long start, unsigned long end,
+					   unsigned long shift)
+{
+	unsigned long size = (1UL << shift);
+	unsigned long mask = (size - 1UL);
+	unsigned long remains = end - start;
+	unsigned long val;
+
+	if (remains < size || (start & mask))
+		return start;
+
+	/* VAL maps:
+	 *
+	 *	shift 28 --> kern_linear_pte_xor index 1
+	 *	shift 31 --> kern_linear_pte_xor index 2
+	 *	shift 34 --> kern_linear_pte_xor index 3
+	 */
+	val = ((shift - kpte_shift_min) / kpte_shift_incr) + 1;
+
+	remains &= ~mask;
+	if (shift != kpte_shift_max)
+		remains = size;
+
+	while (remains) {
+		unsigned long index = start >> kpte_shift_min;
 
-		while (remains >= size_256MB) {
-			unsigned long index = start >> shift_256MB;
+		kpte_set_val(index, val);
 
-			__set_bit(index, kpte_linear_bitmap);
+		start += 1UL << kpte_shift_min;
+		remains -= 1UL << kpte_shift_min;
+	}
+
+	return start;
+}
+
+static void __init mark_kpte_bitmap(unsigned long start, unsigned long end)
+{
+	unsigned long smallest_size, smallest_mask;
+	unsigned long s;
+
+	smallest_size = (1UL << kpte_shift_min);
+	smallest_mask = (smallest_size - 1UL);
+
+	while (start < end) {
+		unsigned long orig_start = start;
+
+		for (s = kpte_shift_max; s >= kpte_shift_min; s -= kpte_shift_incr) {
+			start = kpte_mark_using_shift(start, end, s);
 
-			start += size_256MB;
-			remains -= size_256MB;
+			if (start != orig_start)
+				break;
 		}
+
+		if (start == orig_start)
+			start = (start + smallest_size) & ~smallest_mask;
 	}
 }
 
@@ -1577,13 +1656,16 @@ static void __init sun4v_ktsb_init(void)
 	ktsb_descr[0].resv = 0;
 
 #ifndef CONFIG_DEBUG_PAGEALLOC
-	/* Second KTSB for 4MB/256MB mappings.  */
+	/* Second KTSB for 4MB/256MB/2GB/16GB mappings.  */
 	ktsb_pa = (kern_base +
 		   ((unsigned long)&swapper_4m_tsb[0] - KERNBASE));
 
 	ktsb_descr[1].pgsz_idx = HV_PGSZ_IDX_4MB;
-	ktsb_descr[1].pgsz_mask = (HV_PGSZ_MASK_4MB |
-				   HV_PGSZ_MASK_256MB);
+	ktsb_descr[1].pgsz_mask = ((HV_PGSZ_MASK_4MB |
+				    HV_PGSZ_MASK_256MB |
+				    HV_PGSZ_MASK_2GB |
+				    HV_PGSZ_MASK_16GB) &
+				   cpu_pgsz_mask);
 	ktsb_descr[1].assoc = 1;
 	ktsb_descr[1].num_ttes = KERNEL_TSB4M_NENTRIES;
 	ktsb_descr[1].ctx_idx = 0;
@@ -1606,6 +1688,47 @@ void __cpuinit sun4v_ktsb_register(void)
 	}
 }
 
+static void __init sun4u_linear_pte_xor_finalize(void)
+{
+#ifndef CONFIG_DEBUG_PAGEALLOC
+	/* This is where we would add Panther support for
+	 * 32MB and 256MB pages.
+	 */
+#endif
+}
+
+static void __init sun4v_linear_pte_xor_finalize(void)
+{
+#ifndef CONFIG_DEBUG_PAGEALLOC
+	if (cpu_pgsz_mask & HV_PGSZ_MASK_256MB) {
+		kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZ256MB_4V) ^
+			0xfffff80000000000UL;
+		kern_linear_pte_xor[1] |= (_PAGE_CP_4V | _PAGE_CV_4V |
+					   _PAGE_P_4V | _PAGE_W_4V);
+	} else {
+		kern_linear_pte_xor[1] = kern_linear_pte_xor[0];
+	}
+
+	if (cpu_pgsz_mask & HV_PGSZ_MASK_2GB) {
+		kern_linear_pte_xor[2] = (_PAGE_VALID | _PAGE_SZ2GB_4V) ^
+			0xfffff80000000000UL;
+		kern_linear_pte_xor[2] |= (_PAGE_CP_4V | _PAGE_CV_4V |
+					   _PAGE_P_4V | _PAGE_W_4V);
+	} else {
+		kern_linear_pte_xor[2] = kern_linear_pte_xor[1];
+	}
+
+	if (cpu_pgsz_mask & HV_PGSZ_MASK_16GB) {
+		kern_linear_pte_xor[3] = (_PAGE_VALID | _PAGE_SZ16GB_4V) ^
+			0xfffff80000000000UL;
+		kern_linear_pte_xor[3] |= (_PAGE_CP_4V | _PAGE_CV_4V |
+					   _PAGE_P_4V | _PAGE_W_4V);
+	} else {
+		kern_linear_pte_xor[3] = kern_linear_pte_xor[2];
+	}
+#endif
+}
+
 /* paging_init() sets up the page tables */
 
 static unsigned long last_valid_pfn;
@@ -1665,10 +1788,8 @@ void __init paging_init(void)
 		ktsb_phys_patch();
 	}
 
-	if (tlb_type == hypervisor) {
+	if (tlb_type == hypervisor)
 		sun4v_patch_tlb_handlers();
-		sun4v_ktsb_init();
-	}
 
 	/* Find available physical memory...
 	 *
@@ -1727,9 +1848,6 @@ void __init paging_init(void)
 
 	__flush_tlb_all();
 
-	if (tlb_type == hypervisor)
-		sun4v_ktsb_register();
-
 	prom_build_devicetree();
 	of_populate_present_mask();
 #ifndef CONFIG_SMP
@@ -1742,8 +1860,36 @@ void __init paging_init(void)
 #ifndef CONFIG_SMP
 		mdesc_fill_in_cpu_data(cpu_all_mask);
 #endif
+		mdesc_get_page_sizes(cpu_all_mask, &cpu_pgsz_mask);
+
+		sun4v_linear_pte_xor_finalize();
+
+		sun4v_ktsb_init();
+		sun4v_ktsb_register();
+	} else {
+		unsigned long impl, ver;
+
+		cpu_pgsz_mask = (HV_PGSZ_MASK_8K | HV_PGSZ_MASK_64K |
+				 HV_PGSZ_MASK_512K | HV_PGSZ_MASK_4MB);
+
+		__asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver));
+		impl = ((ver >> 32) & 0xffff);
+		if (impl == PANTHER_IMPL)
+			cpu_pgsz_mask |= (HV_PGSZ_MASK_32MB |
+					  HV_PGSZ_MASK_256MB);
+
+		sun4u_linear_pte_xor_finalize();
 	}
 
+	/* Flush the TLBs and the 4M TSB so that the updated linear
+	 * pte XOR settings are realized for all mappings.
+	 */
+	__flush_tlb_all();
+#ifndef CONFIG_DEBUG_PAGEALLOC
+	memset(swapper_4m_tsb, 0x40, sizeof(swapper_4m_tsb));
+#endif
+	__flush_tlb_all();
+
 	/* Setup bootmem... */
 	last_valid_pfn = end_pfn = bootmem_init(phys_base);
 
@@ -2020,6 +2166,9 @@ EXPORT_SYMBOL(_PAGE_CACHE);
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 unsigned long vmemmap_table[VMEMMAP_SIZE];
 
+static long __meminitdata addr_start, addr_end;
+static int __meminitdata node_start;
+
 int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
 {
 	unsigned long vstart = (unsigned long) start;
@@ -2050,15 +2199,30 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
 
 			*vmem_pp = pte_base | __pa(block);
 
-			printk(KERN_INFO "[%p-%p] page_structs=%lu "
-			       "node=%d entry=%lu/%lu\n", start, block, nr,
-			       node,
-			       addr >> VMEMMAP_CHUNK_SHIFT,
-			       VMEMMAP_SIZE);
+			/* check to see if we have contiguous blocks */
+			if (addr_end != addr || node_start != node) {
+				if (addr_start)
+					printk(KERN_DEBUG " [%lx-%lx] on node %d\n",
+					       addr_start, addr_end-1, node_start);
+				addr_start = addr;
+				node_start = node;
+			}
+			addr_end = addr + VMEMMAP_CHUNK;
 		}
 	}
 	return 0;
 }
+
+void __meminit vmemmap_populate_print_last(void)
+{
+	if (addr_start) {
+		printk(KERN_DEBUG " [%lx-%lx] on node %d\n",
+		       addr_start, addr_end-1, node_start);
+		addr_start = 0;
+		addr_end = 0;
+		node_start = 0;
+	}
+}
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
 static void prot_init_common(unsigned long page_none,
@@ -2092,6 +2256,7 @@ static void __init sun4u_pgprot_init(void)
 {
 	unsigned long page_none, page_shared, page_copy, page_readonly;
 	unsigned long page_exec_bit;
+	int i;
 
 	PAGE_KERNEL = __pgprot (_PAGE_PRESENT_4U | _PAGE_VALID |
 				_PAGE_CACHE_4U | _PAGE_P_4U |
@@ -2119,8 +2284,8 @@ static void __init sun4u_pgprot_init(void)
 	kern_linear_pte_xor[0] |= (_PAGE_CP_4U | _PAGE_CV_4U |
 				   _PAGE_P_4U | _PAGE_W_4U);
 
-	/* XXX Should use 256MB on Panther. XXX */
-	kern_linear_pte_xor[1] = kern_linear_pte_xor[0];
+	for (i = 1; i < 4; i++)
+		kern_linear_pte_xor[i] = kern_linear_pte_xor[0];
 
 	_PAGE_SZBITS = _PAGE_SZBITS_4U;
 	_PAGE_ALL_SZ_BITS =  (_PAGE_SZ4MB_4U | _PAGE_SZ512K_4U |
@@ -2146,6 +2311,7 @@ static void __init sun4v_pgprot_init(void)
 {
 	unsigned long page_none, page_shared, page_copy, page_readonly;
 	unsigned long page_exec_bit;
+	int i;
 
 	PAGE_KERNEL = __pgprot (_PAGE_PRESENT_4V | _PAGE_VALID |
 				_PAGE_CACHE_4V | _PAGE_P_4V |
@@ -2167,15 +2333,8 @@ static void __init sun4v_pgprot_init(void)
 	kern_linear_pte_xor[0] |= (_PAGE_CP_4V | _PAGE_CV_4V |
 				   _PAGE_P_4V | _PAGE_W_4V);
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZBITS_4V) ^
-		0xfffff80000000000UL;
-#else
-	kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZ256MB_4V) ^
-		0xfffff80000000000UL;
-#endif
-	kern_linear_pte_xor[1] |= (_PAGE_CP_4V | _PAGE_CV_4V |
-				   _PAGE_P_4V | _PAGE_W_4V);
+	for (i = 1; i < 4; i++)
+		kern_linear_pte_xor[i] = kern_linear_pte_xor[0];
 
 	pg_iobits = (_PAGE_VALID | _PAGE_PRESENT_4V | __DIRTY_BITS_4V |
 		     __ACCESS_BITS_4V | _PAGE_E_4V);
diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h
index 3e1ac8b96cae..0661aa606dec 100644
--- a/arch/sparc/mm/init_64.h
+++ b/arch/sparc/mm/init_64.h
@@ -8,12 +8,12 @@
 #define MAX_PHYS_ADDRESS	(1UL << 41UL)
 #define KPTE_BITMAP_CHUNK_SZ		(256UL * 1024UL * 1024UL)
 #define KPTE_BITMAP_BYTES	\
-	((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+	((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 4)
 #define VALID_ADDR_BITMAP_CHUNK_SZ	(4UL * 1024UL * 1024UL)
 #define VALID_ADDR_BITMAP_BYTES	\
 	((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8)
 
-extern unsigned long kern_linear_pte_xor[2];
+extern unsigned long kern_linear_pte_xor[4];
 extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
 extern unsigned int sparc64_highest_unlocked_tlb_ent;
 extern unsigned long sparc64_kern_pri_context;
diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c
index a8a58cad9d2b..0f4f7191fbba 100644
--- a/arch/sparc/mm/iommu.c
+++ b/arch/sparc/mm/iommu.c
@@ -90,8 +90,8 @@ static void __init sbus_iommu_init(struct platform_device *op)
            it to us. */
         tmp = __get_free_pages(GFP_KERNEL, IOMMU_ORDER);
 	if (!tmp) {
-		prom_printf("Unable to allocate iommu table [0x%08x]\n",
-			    IOMMU_NPTES*sizeof(iopte_t));
+		prom_printf("Unable to allocate iommu table [0x%lx]\n",
+			    IOMMU_NPTES * sizeof(iopte_t));
 		prom_halt();
 	}
 	iommu->page_table = (iopte_t *)tmp;
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
index e9073e9501b3..28368701ef79 100644
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -464,8 +464,12 @@ void bpf_jit_compile(struct sk_filter *fp)
 				emit_alu_K(OR, K);
 				break;
 			case BPF_S_ANC_ALU_XOR_X: /* A ^= X; */
+			case BPF_S_ALU_XOR_X:
 				emit_alu_X(XOR);
 				break;
+			case BPF_S_ALU_XOR_K:	/* A ^= K */
+				emit_alu_K(XOR, K);
+				break;
 			case BPF_S_ALU_LSH_X:	/* A <<= X */
 				emit_alu_X(SLL);
 				break;
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 932e4430f7f3..c9a3c1fe7297 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -412,14 +412,6 @@ config TILE_USB
 config NEED_BOUNCE_POOL
 	def_bool USB_OHCI_HCD
 
-config HOTPLUG
-	bool "Support for hot-pluggable devices"
-	---help---
-	  Say Y here if you want to plug devices into your computer while
-	  the system is running, and be able to use them quickly.  In many
-	  cases, the devices can likewise be unplugged at any time too.
-	  One well-known example of this is USB.
-
 source "drivers/pci/hotplug/Kconfig"
 
 endmenu
diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig
index 0270620a1692..8c5eff6d6df5 100644
--- a/arch/tile/configs/tilegx_defconfig
+++ b/arch/tile/configs/tilegx_defconfig
@@ -134,7 +134,6 @@ CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig
index c11de27a9bcb..e7a3dfcbcda7 100644
--- a/arch/tile/configs/tilepro_defconfig
+++ b/arch/tile/configs/tilepro_defconfig
@@ -132,7 +132,6 @@ CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
index 6e74450ff0a1..3063e6fc8daa 100644
--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -110,6 +110,68 @@ struct compat_flock64 {
 
 typedef u32               compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+#define COMPAT_SI_PAD_SIZE	(128/sizeof(int) - 3)
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[COMPAT_SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+			int _overrun_incr;	/* amount to add to overrun */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;	/* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
diff --git a/arch/tile/include/asm/elf.h b/arch/tile/include/asm/elf.h
index d16d006d660e..f8ccf08f6934 100644
--- a/arch/tile/include/asm/elf.h
+++ b/arch/tile/include/asm/elf.h
@@ -156,12 +156,12 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 #undef SET_PERSONALITY
 #define SET_PERSONALITY(ex) \
 do { \
-	current->personality = PER_LINUX; \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK))); \
 	current_thread_info()->status &= ~TS_COMPAT; \
 } while (0)
 #define COMPAT_SET_PERSONALITY(ex) \
 do { \
-	current->personality = PER_LINUX_32BIT; \
+	set_personality(PER_LINUX | (current->personality & (~PER_MASK))); \
 	current_thread_info()->status |= TS_COMPAT; \
 } while (0)
 
diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h
index 7a7ce390534f..d5e86c9f74fd 100644
--- a/arch/tile/include/asm/topology.h
+++ b/arch/tile/include/asm/topology.h
@@ -69,7 +69,6 @@ static inline const struct cpumask *cpumask_of_node(int node)
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_BALANCE_WAKE			\
 				| 0*SD_WAKE_AFFINE			\
-				| 0*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h
index a017246ca0ce..0e1f3e66e492 100644
--- a/arch/tile/include/asm/unistd.h
+++ b/arch/tile/include/asm/unistd.h
@@ -12,9 +12,6 @@
  *   more details.
  */
 
-#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL)
-#define _ASM_TILE_UNISTD_H
-
 #if !defined(__LP64__) || defined(__SYSCALL_COMPAT)
 /* Use the flavor of this syscall that matches the 32-bit API better. */
 #define __ARCH_WANT_SYNC_FILE_RANGE2
@@ -43,5 +40,3 @@ __SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr)
 #endif
 #define __ARCH_WANT_SYS_NEWFSTATAT
 #endif
-
-#endif /* _ASM_TILE_UNISTD_H */
diff --git a/arch/tile/include/gxio/dma_queue.h b/arch/tile/include/gxio/dma_queue.h
index 00654feb7db0..b9e45e37649e 100644
--- a/arch/tile/include/gxio/dma_queue.h
+++ b/arch/tile/include/gxio/dma_queue.h
@@ -19,7 +19,7 @@
  * DMA queue management APIs shared between TRIO and mPIPE.
  */
 
-#include "common.h"
+#include <gxio/common.h>
 
 /* The credit counter lives in the high 32 bits. */
 #define DMA_QUEUE_CREDIT_SHIFT 32
diff --git a/arch/tile/include/gxio/iorpc_trio.h b/arch/tile/include/gxio/iorpc_trio.h
index 15fb77992083..58105c31228b 100644
--- a/arch/tile/include/gxio/iorpc_trio.h
+++ b/arch/tile/include/gxio/iorpc_trio.h
@@ -25,21 +25,23 @@
 #include <linux/module.h>
 #include <asm/pgtable.h>
 
-#define GXIO_TRIO_OP_ALLOC_ASIDS       IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400)
+#define GXIO_TRIO_OP_DEALLOC_ASID      IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400)
+#define GXIO_TRIO_OP_ALLOC_ASIDS       IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1401)
 
-#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1402)
+#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1404)
 
-#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e)
-#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140f)
+#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1412)
 
-#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1417)
-#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1418)
-#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1419)
-#define GXIO_TRIO_OP_CONFIG_MSI_INTR   IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x141a)
+#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1414)
 
-#define GXIO_TRIO_OP_SET_MPS_MRS       IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141c)
-#define GXIO_TRIO_OP_FORCE_RC_LINK_UP  IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141d)
-#define GXIO_TRIO_OP_FORCE_EP_LINK_UP  IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e)
+#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e)
+#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141f)
+#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1420)
+#define GXIO_TRIO_OP_CONFIG_MSI_INTR   IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1421)
+
+#define GXIO_TRIO_OP_SET_MPS_MRS       IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1423)
+#define GXIO_TRIO_OP_FORCE_RC_LINK_UP  IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1424)
+#define GXIO_TRIO_OP_FORCE_EP_LINK_UP  IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1425)
 #define GXIO_TRIO_OP_GET_MMIO_BASE     IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
diff --git a/arch/tile/include/gxio/mpipe.h b/arch/tile/include/gxio/mpipe.h
index 78c598618c97..b74f470ed11e 100644
--- a/arch/tile/include/gxio/mpipe.h
+++ b/arch/tile/include/gxio/mpipe.h
@@ -21,8 +21,8 @@
  * resources.
  */
 
-#include "common.h"
-#include "dma_queue.h"
+#include <gxio/common.h>
+#include <gxio/dma_queue.h>
 
 #include <linux/time.h>
 
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index 77b80cdd46d8..df10a662cc25 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -140,8 +140,8 @@
 
 #include <linux/types.h>
 
-#include "common.h"
-#include "dma_queue.h"
+#include <gxio/common.h>
+#include <gxio/dma_queue.h>
 
 #include <arch/trio_constants.h>
 #include <arch/trio.h>
diff --git a/arch/tile/include/gxio/usb_host.h b/arch/tile/include/gxio/usb_host.h
index a60a126e4565..5eedec0e988e 100644
--- a/arch/tile/include/gxio/usb_host.h
+++ b/arch/tile/include/gxio/usb_host.h
@@ -14,7 +14,7 @@
 #ifndef _GXIO_USB_H_
 #define _GXIO_USB_H_
 
-#include "common.h"
+#include <gxio/common.h>
 
 #include <hv/drv_usb_host_intf.h>
 #include <hv/iorpc.h>
diff --git a/arch/tile/include/hv/iorpc.h b/arch/tile/include/hv/iorpc.h
index 89c72a5d9341..ddf1604482b3 100644
--- a/arch/tile/include/hv/iorpc.h
+++ b/arch/tile/include/hv/iorpc.h
@@ -248,7 +248,7 @@
 #if defined(__HV__)
 #include <hv/hypervisor.h>
 #elif defined(__KERNEL__)
-#include "hypervisor.h"
+#include <hv/hypervisor.h>
 #include <linux/types.h>
 #else
 #include <stdint.h>
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
new file mode 100644
index 000000000000..aafaa5aa54d4
--- /dev/null
+++ b/arch/tile/include/uapi/arch/Kbuild
@@ -0,0 +1 @@
+# UAPI Header export list
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index 474571b84085..7bc0859a9f5e 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -55,63 +55,6 @@ struct compat_ucontext {
 	sigset_t	  uc_sigmask;	/* mask last for extensibility */
 };
 
-#define COMPAT_SI_PAD_SIZE	((SI_MAX_SIZE - 3 * sizeof(int)) / sizeof(int))
-
-struct compat_siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[COMPAT_SI_PAD_SIZE];
-
-		/* kill() */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;	/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;	/* same as below */
-			int _sys_private;	/* not to be passed to user */
-			int _overrun_incr;	/* amount to add to overrun */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			unsigned int _pid;	/* which child */
-			unsigned int _uid;	/* sender's uid */
-			int _status;		/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			unsigned int _addr;	/* faulting insn/memory ref. */
-#ifdef __ARCH_SI_TRAPNO
-			int _trapno;	/* TRAP # which caused the signal */
-#endif
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-};
-
 struct compat_rt_sigframe {
 	unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */
 	struct compat_siginfo info;
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index 33c10864d2f7..759822687e8f 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -246,16 +246,13 @@ static void __devinit fixup_read_and_payload_sizes(void)
 
 	/* Scan for the smallest maximum payload size. */
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		int pcie_caps_offset;
 		u32 devcap;
 		int max_payload;
 
-		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
-		if (pcie_caps_offset == 0)
+		if (!pci_is_pcie(dev))
 			continue;
 
-		pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
-				      &devcap);
+		pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &devcap);
 		max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
 		if (max_payload < smallest_max_payload)
 			smallest_max_payload = max_payload;
@@ -263,21 +260,10 @@ static void __devinit fixup_read_and_payload_sizes(void)
 
 	/* Now, set the max_payload_size for all devices to that value. */
 	new_values = (max_read_size << 12) | (smallest_max_payload << 5);
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		int pcie_caps_offset;
-		u16 devctl;
-
-		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
-		if (pcie_caps_offset == 0)
-			continue;
-
-		pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
-				     &devctl);
-		devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
-		devctl |= new_values;
-		pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
-				      devctl);
-	}
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
+		pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
+				PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ,
+				new_values);
 }
 
 
@@ -404,14 +390,6 @@ void pcibios_set_master(struct pci_dev *dev)
 }
 
 /*
- * This is called from the generic Linux layer.
- */
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
  * Enable memory and/or address decoding, as appropriate, for the
  * device described by the 'dev' struct.
  *
diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index 0e213e35ffc3..2ba6d052f85d 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1034,14 +1034,6 @@ char __devinit *pcibios_setup(char *str)
 }
 
 /*
- * This is called from the generic Linux layer.
- */
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
  * Enable memory address decoding, as appropriate, for the
  * device described by the 'dev' struct. The I/O decoding
  * is disabled, though the TILE-Gx supports I/O addressing.
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 097091059aaa..133f7de2a13d 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -66,7 +66,9 @@ USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -D__KERNEL__,,\
 include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
 
 KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include \
-		   -I$(HOST_DIR)/include/generated
+		   -I$(srctree)/$(HOST_DIR)/include/uapi \
+		   -I$(HOST_DIR)/include/generated \
+		   -I$(HOST_DIR)/include/generated/uapi
 
 # -Derrno=kernel_errno - This turns all kernel references to errno into
 # kernel_errno to separate them from the libc errno.  This allows -fno-common
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index bbaf2c59830a..457475f98414 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -409,7 +409,8 @@ int setup_one_line(struct line *lines, int n, char *init,
 		line->valid = 1;
 		err = parse_chan_pair(new, line, n, opts, error_out);
 		if (!err) {
-			struct device *d = tty_register_device(driver, n, NULL);
+			struct device *d = tty_port_register_device(&line->port,
+					driver, n, NULL);
 			if (IS_ERR(d)) {
 				*error_out = "Failed to register device";
 				err = PTR_ERR(d);
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 664a60e8dfb4..9efeb6da48bc 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -21,6 +21,9 @@
 #include <linux/un.h>
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+#include <linux/file.h>
 #include <asm/uaccess.h>
 #include <asm/switch_to.h>
 
@@ -118,90 +121,38 @@ void mconsole_log(struct mc_request *req)
 	mconsole_reply(req, "", 0, 0);
 }
 
-/* This is a more convoluted version of mconsole_proc, which has some stability
- * problems; however, we need it fixed, because it is expected that UML users
- * mount HPPFS instead of procfs on /proc. And we want mconsole_proc to still
- * show the real procfs content, not the ones from hppfs.*/
-#if 0
 void mconsole_proc(struct mc_request *req)
 {
 	struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt;
-	struct file *file;
-	int n;
-	char *ptr = req->request.data, *buf;
-	mm_segment_t old_fs = get_fs();
-
-	ptr += strlen("proc");
-	ptr = skip_spaces(ptr);
-
-	file = file_open_root(mnt->mnt_root, mnt, ptr, O_RDONLY);
-	if (IS_ERR(file)) {
-		mconsole_reply(req, "Failed to open file", 1, 0);
-		goto out;
-	}
-
-	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (buf == NULL) {
-		mconsole_reply(req, "Failed to allocate buffer", 1, 0);
-		goto out_fput;
-	}
-
-	if (file->f_op->read) {
-		do {
-			loff_t pos;
-			set_fs(KERNEL_DS);
-			n = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
-			file_pos_write(file, pos);
-			set_fs(old_fs);
-			if (n >= 0) {
-				buf[n] = '\0';
-				mconsole_reply(req, buf, 0, (n > 0));
-			}
-			else {
-				mconsole_reply(req, "Read of file failed",
-					       1, 0);
-				goto out_free;
-			}
-		} while (n > 0);
-	}
-	else mconsole_reply(req, "", 0, 0);
-
- out_free:
-	kfree(buf);
- out_fput:
-	fput(file);
- out: ;
-}
-#endif
-
-void mconsole_proc(struct mc_request *req)
-{
-	char path[64];
 	char *buf;
 	int len;
-	int fd;
+	struct file *file;
 	int first_chunk = 1;
 	char *ptr = req->request.data;
 
 	ptr += strlen("proc");
 	ptr = skip_spaces(ptr);
-	snprintf(path, sizeof(path), "/proc/%s", ptr);
 
-	fd = sys_open(path, 0, 0);
-	if (fd < 0) {
+	file = file_open_root(mnt->mnt_root, mnt, ptr, O_RDONLY);
+	if (IS_ERR(file)) {
 		mconsole_reply(req, "Failed to open file", 1, 0);
-		printk(KERN_ERR "open %s: %d\n",path,fd);
+		printk(KERN_ERR "open /proc/%s: %ld\n", ptr, PTR_ERR(file));
 		goto out;
 	}
 
 	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (buf == NULL) {
 		mconsole_reply(req, "Failed to allocate buffer", 1, 0);
-		goto out_close;
+		goto out_fput;
 	}
 
-	for (;;) {
-		len = sys_read(fd, buf, PAGE_SIZE-1);
+	do {
+		loff_t pos;
+		mm_segment_t old_fs = get_fs();
+		set_fs(KERNEL_DS);
+		len = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
+		set_fs(old_fs);
+		file->f_pos = pos;
 		if (len < 0) {
 			mconsole_reply(req, "Read of file failed", 1, 0);
 			goto out_free;
@@ -211,22 +162,14 @@ void mconsole_proc(struct mc_request *req)
 			mconsole_reply(req, "\n", 0, 1);
 			first_chunk = 0;
 		}
-		if (len == PAGE_SIZE-1) {
-			buf[len] = '\0';
-			mconsole_reply(req, buf, 0, 1);
-		} else {
-			buf[len] = '\0';
-			mconsole_reply(req, buf, 0, 0);
-			break;
-		}
-	}
-
+		buf[len] = '\0';
+		mconsole_reply(req, buf, 0, (len > 0));
+	} while (len > 0);
  out_free:
 	kfree(buf);
- out_close:
-	sys_close(fd);
- out:
-	/* nothing */;
+ out_fput:
+	fput(file);
+ out: ;
 }
 
 #define UML_MCONSOLE_HELPTEXT \
@@ -705,6 +648,7 @@ static void stack_proc(void *arg)
 	struct task_struct *from = current, *to = arg;
 
 	to->thread.saved_task = from;
+	rcu_switch(from, to);
 	switch_to(from, to, from);
 }
 
diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h
index 69f1c57a8d0d..33a6a2423bd2 100644
--- a/arch/um/include/asm/processor-generic.h
+++ b/arch/um/include/asm/processor-generic.h
@@ -20,14 +20,6 @@ struct mm_struct;
 
 struct thread_struct {
 	struct task_struct *saved_task;
-	/*
-	 * This flag is set to 1 before calling do_fork (and analyzed in
-	 * copy_thread) to mark that we are begin called from userspace (fork /
-	 * vfork / clone), and reset to 0 after. It is left to 0 when called
-	 * from kernelspace (i.e. kernel_thread() or fork_idle(),
-	 * as of 2.6.11).
-	 */
-	int forking;
 	struct pt_regs regs;
 	int singlestep_syscall;
 	void *fault_addr;
@@ -58,7 +50,6 @@ struct thread_struct {
 
 #define INIT_THREAD \
 { \
-	.forking		= 0, \
 	.regs		   	= EMPTY_REGS,	\
 	.fault_addr		= NULL, \
 	.prev_sched		= NULL, \
diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h
index 40db8f71deae..2df313b6a586 100644
--- a/arch/um/include/shared/common-offsets.h
+++ b/arch/um/include/shared/common-offsets.h
@@ -7,16 +7,6 @@ DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK);
 DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT);
 DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
 
-DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
-DEFINE_STR(UM_KERN_ALERT, KERN_ALERT);
-DEFINE_STR(UM_KERN_CRIT, KERN_CRIT);
-DEFINE_STR(UM_KERN_ERR, KERN_ERR);
-DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
-DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
-DEFINE_STR(UM_KERN_INFO, KERN_INFO);
-DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
-DEFINE_STR(UM_KERN_CONT, KERN_CONT);
-
 DEFINE(UM_ELF_CLASS, ELF_CLASS);
 DEFINE(UM_ELFCLASS32, ELFCLASS32);
 DEFINE(UM_ELFCLASS64, ELFCLASS64);
diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h
index 4fa82c055aab..cef068563336 100644
--- a/arch/um/include/shared/user.h
+++ b/arch/um/include/shared/user.h
@@ -26,6 +26,17 @@
 extern void panic(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
 
+/* Requires preincluding include/linux/kern_levels.h */
+#define UM_KERN_EMERG	KERN_EMERG
+#define UM_KERN_ALERT	KERN_ALERT
+#define UM_KERN_CRIT	KERN_CRIT
+#define UM_KERN_ERR	KERN_ERR
+#define UM_KERN_WARNING	KERN_WARNING
+#define UM_KERN_NOTICE	KERN_NOTICE
+#define UM_KERN_INFO	KERN_INFO
+#define UM_KERN_DEBUG	KERN_DEBUG
+#define UM_KERN_CONT	KERN_CONT
+
 #ifdef UML_CONFIG_PRINTK
 extern int printk(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 6cade9366364..8c82786da823 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -39,34 +39,21 @@ void flush_thread(void)
 
 void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
 {
+	get_safe_registers(regs->regs.gp, regs->regs.fp);
 	PT_REGS_IP(regs) = eip;
 	PT_REGS_SP(regs) = esp;
-}
-EXPORT_SYMBOL(start_thread);
-
-static long execve1(const char *file,
-		    const char __user *const __user *argv,
-		    const char __user *const __user *env)
-{
-	long error;
-
-	error = do_execve(file, argv, env, &current->thread.regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
+	current->ptrace &= ~PT_DTRACE;
 #ifdef SUBARCH_EXECVE1
-		SUBARCH_EXECVE1(&current->thread.regs.regs);
+	SUBARCH_EXECVE1(regs->regs);
 #endif
-		task_unlock(current);
-	}
-	return error;
 }
+EXPORT_SYMBOL(start_thread);
 
 long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env)
 {
 	long err;
 
-	err = execve1(file, argv, env);
+	err = do_execve(file, argv, env, &current->thread.regs);
 	if (!err)
 		UML_LONGJMP(current->thread.exec_buf, 1);
 	return err;
@@ -81,7 +68,7 @@ long sys_execve(const char __user *file, const char __user *const __user *argv,
 	filename = getname(file);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename)) goto out;
-	error = execve1(filename, argv, env);
+	error = do_execve(filename, argv, env, &current->thread.regs);
 	putname(filename);
  out:
 	return error;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 57fc7028714a..c5f5afa50745 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -181,11 +181,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		struct pt_regs *regs)
 {
 	void (*handler)(void);
+	int kthread = current->flags & PF_KTHREAD;
 	int ret = 0;
 
 	p->thread = (struct thread_struct) INIT_THREAD;
 
-	if (current->thread.forking) {
+	if (!kthread) {
 	  	memcpy(&p->thread.regs.regs, &regs->regs,
 		       sizeof(p->thread.regs.regs));
 		PT_REGS_SET_SYSCALL_RETURN(&p->thread.regs, 0);
@@ -195,8 +196,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		handler = fork_handler;
 
 		arch_copy_thread(&current->thread.arch, &p->thread.arch);
-	}
-	else {
+	} else {
 		get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
 		p->thread.request.u.thread = current->thread.request.u.thread;
 		handler = new_thread_handler;
@@ -204,7 +204,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	new_thread(task_stack_page(p), &p->thread.switch_buf, handler);
 
-	if (current->thread.forking) {
+	if (!kthread) {
 		clear_flushed_tls(p);
 
 		/*
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index 7362d58efc29..cc9c2350e417 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -22,9 +22,13 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr,
 			 struct k_sigaction *ka, siginfo_t *info)
 {
 	sigset_t *oldset = sigmask_to_save();
+	int singlestep = 0;
 	unsigned long sp;
 	int err;
 
+	if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
+		singlestep = 1;
+
 	/* Did we come from a system call? */
 	if (PT_REGS_SYSCALL_NR(regs) >= 0) {
 		/* If so, check system call restarting.. */
@@ -61,7 +65,7 @@ static void handle_signal(struct pt_regs *regs, unsigned long signr,
 	if (err)
 		force_sigsegv(signr, current);
 	else
-		signal_delivered(signr, info, ka, regs, 0);
+		signal_delivered(signr, info, ka, regs, singlestep);
 }
 
 static int kern_do_signal(struct pt_regs *regs)
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index f958cb876ee3..a4c6d8eee74c 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -17,25 +17,25 @@
 
 long sys_fork(void)
 {
-	long ret;
-
-	current->thread.forking = 1;
-	ret = do_fork(SIGCHLD, UPT_SP(&current->thread.regs.regs),
+	return do_fork(SIGCHLD, UPT_SP(&current->thread.regs.regs),
 		      &current->thread.regs, 0, NULL, NULL);
-	current->thread.forking = 0;
-	return ret;
 }
 
 long sys_vfork(void)
 {
-	long ret;
-
-	current->thread.forking = 1;
-	ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
 		      UPT_SP(&current->thread.regs.regs),
 		      &current->thread.regs, 0, NULL, NULL);
-	current->thread.forking = 0;
-	return ret;
+}
+
+long sys_clone(unsigned long clone_flags, unsigned long newsp,
+	       void __user *parent_tid, void __user *child_tid)
+{
+	if (!newsp)
+		newsp = UPT_SP(&current->thread.regs.regs);
+
+	return do_fork(clone_flags, newsp, &current->thread.regs, 0, parent_tid,
+		      child_tid);
 }
 
 long old_mmap(unsigned long addr, unsigned long len,
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index f60238559af3..0748fe0c8a73 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -114,7 +114,7 @@ static void deliver_alarm(void)
 	skew += this_tick - last_tick;
 
 	while (skew >= one_tick) {
-		alarm_handler(SIGVTALRM, NULL);
+		alarm_handler(SIGVTALRM, NULL, NULL);
 		skew -= one_tick;
 	}
 
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index d50270d26b42..15889df9b466 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -8,7 +8,7 @@ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m)  $(USER_SINGLE_OBJS))
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 
 $(USER_OBJS:.o=.%): \
-	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include user.h $(CFLAGS_$(basetarget).o)
+	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include $(srctree)/include/linux/kern_levels.h -include user.h $(CFLAGS_$(basetarget).o)
 
 # These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of
 # using it directly.
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index b0a47433341e..1e638e75a6b7 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -6,6 +6,7 @@ config UNICORE32
 	select HAVE_DMA_ATTRS
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
+	select GENERIC_ATOMIC64
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
 	select ARCH_HAVE_CUSTOM_GPIO_H
diff --git a/arch/unicore32/include/asm/unistd.h b/arch/unicore32/include/asm/unistd.h
index 9b2428019961..2abcf61c615d 100644
--- a/arch/unicore32/include/asm/unistd.h
+++ b/arch/unicore32/include/asm/unistd.h
@@ -9,10 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL)
-#define __UNICORE_UNISTD_H__
 
 /* Use the standard ABI for syscalls. */
 #include <asm-generic/unistd.h>
-
-#endif /* __UNICORE_UNISTD_H__ */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
index 8040d575dddb..46705afcbf5a 100644
--- a/arch/unicore32/include/mach/PKUnity.h
+++ b/arch/unicore32/include/mach/PKUnity.h
@@ -15,7 +15,7 @@
 #error You must include hardware.h not PKUnity.h
 #endif
 
-#include "bitfield.h"
+#include <mach/bitfield.h>
 
 /*
  * Memory Definitions
@@ -32,7 +32,7 @@
  * 0x98000000 - 0x9FFFFFFF 128MB  PCI PCI-AHB MEM-mapping
  */
 #define PKUNITY_PCI_BASE		io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */
-#include "regs-pci.h"
+#include <mach/regs-pci.h>
 
 #define PKUNITY_PCICFG_BASE		(PKUNITY_PCI_BASE + 0x0)
 #define PKUNITY_PCIBRI_BASE		(PKUNITY_PCI_BASE + 0x00010000)
@@ -50,18 +50,18 @@
 #define PKUNITY_ARBITER_BASE		(PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */
 #define PKUNITY_DDR2CTRL_BASE		(PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */
 #define PKUNITY_DMAC_BASE		(PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */
-#include "regs-dmac.h"
+#include <mach/regs-dmac.h>
 #define PKUNITY_UMAL_BASE		(PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */
-#include "regs-umal.h"
+#include <mach/regs-umal.h>
 #define PKUNITY_USB_BASE		(PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */
 #define PKUNITY_SATA_BASE		(PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */
 #define PKUNITY_SMC_BASE		(PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */
 /* AHB-9 is for APB bridge */
 #define PKUNITY_MME_BASE		(PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */
 #define PKUNITY_UNIGFX_BASE		(PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */
-#include "regs-unigfx.h"
+#include <mach/regs-unigfx.h>
 #define PKUNITY_NAND_BASE		(PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */
-#include "regs-nand.h"
+#include <mach/regs-nand.h>
 #define PKUNITY_H264D_BASE		(PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */
 #define PKUNITY_H264E_BASE		(PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */
 
@@ -72,27 +72,27 @@
 
 #define PKUNITY_UART0_BASE		(PKUNITY_APB_BASE + 0x000000) /* APB-0 */
 #define PKUNITY_UART1_BASE		(PKUNITY_APB_BASE + 0x100000) /* APB-1 */
-#include "regs-uart.h"
+#include <mach/regs-uart.h>
 #define PKUNITY_I2C_BASE		(PKUNITY_APB_BASE + 0x200000) /* APB-2 */
-#include "regs-i2c.h"
+#include <mach/regs-i2c.h>
 #define PKUNITY_SPI_BASE		(PKUNITY_APB_BASE + 0x300000) /* APB-3 */
-#include "regs-spi.h"
+#include <mach/regs-spi.h>
 #define PKUNITY_AC97_BASE		(PKUNITY_APB_BASE + 0x400000) /* APB-4 */
-#include "regs-ac97.h"
+#include <mach/regs-ac97.h>
 #define PKUNITY_GPIO_BASE		(PKUNITY_APB_BASE + 0x500000) /* APB-5 */
-#include "regs-gpio.h"
+#include <mach/regs-gpio.h>
 #define PKUNITY_INTC_BASE		(PKUNITY_APB_BASE + 0x600000) /* APB-6 */
-#include "regs-intc.h"
+#include <mach/regs-intc.h>
 #define PKUNITY_RTC_BASE		(PKUNITY_APB_BASE + 0x700000) /* APB-7 */
-#include "regs-rtc.h"
+#include <mach/regs-rtc.h>
 #define PKUNITY_OST_BASE		(PKUNITY_APB_BASE + 0x800000) /* APB-8 */
-#include "regs-ost.h"
+#include <mach/regs-ost.h>
 #define PKUNITY_RESETC_BASE		(PKUNITY_APB_BASE + 0x900000) /* APB-9 */
-#include "regs-resetc.h"
+#include <mach/regs-resetc.h>
 #define PKUNITY_PM_BASE			(PKUNITY_APB_BASE + 0xA00000) /* APB-10 */
-#include "regs-pm.h"
+#include <mach/regs-pm.h>
 #define PKUNITY_PS2_BASE		(PKUNITY_APB_BASE + 0xB00000) /* APB-11 */
-#include "regs-ps2.h"
+#include <mach/regs-ps2.h>
 #define PKUNITY_SDC_BASE		(PKUNITY_APB_BASE + 0xC00000) /* APB-12 */
-#include "regs-sdc.h"
+#include <mach/regs-sdc.h>
 
diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h
index 930bea6e129a..9e20b5d9ed50 100644
--- a/arch/unicore32/include/mach/hardware.h
+++ b/arch/unicore32/include/mach/hardware.h
@@ -15,7 +15,7 @@
 #ifndef __MACH_PUV3_HARDWARE_H__
 #define __MACH_PUV3_HARDWARE_H__
 
-#include "PKUnity.h"
+#include <mach/PKUnity.h>
 
 #ifndef __ASSEMBLY__
 #define io_p2v(x)	(void __iomem *)((x) - PKUNITY_MMIO_BASE)
diff --git a/arch/unicore32/include/mach/uncompress.h b/arch/unicore32/include/mach/uncompress.h
index 142d3e7958a9..9be67c9d3b53 100644
--- a/arch/unicore32/include/mach/uncompress.h
+++ b/arch/unicore32/include/mach/uncompress.h
@@ -13,8 +13,8 @@
 #ifndef __MACH_PUV3_UNCOMPRESS_H__
 #define __MACH_PUV3_UNCOMPRESS_H__
 
-#include "hardware.h"
-#include "ocd.h"
+#include <mach/hardware.h>
+#include <mach/ocd.h>
 
 extern char input_data[];
 extern char input_data_end[];
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index 46cb6c9de6c9..b0056f68d321 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -154,14 +154,6 @@ void __init puv3_pci_adjust_zones(unsigned long *zone_size,
 	zhole_size[0] = 0;
 }
 
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	if (debug_pci)
-		printk(KERN_DEBUG "PCI: Assigning IRQ %02d to %s\n",
-				irq, pci_name(dev));
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 /*
  * If the bus contains any of these devices, then we must not turn on
  * parity checking of any kind.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ba2657c49217..b72777ff32a9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -7,11 +7,13 @@ config 64BIT
 	  Say no to build a 32-bit kernel - formerly known as i386
 
 config X86_32
-	def_bool !64BIT
+	def_bool y
+	depends on !64BIT
 	select CLKSRC_I8253
 
 config X86_64
-	def_bool 64BIT
+	def_bool y
+	depends on 64BIT
 	select X86_DEV_DMA_OPS
 
 ### Arch settings
@@ -36,6 +38,7 @@ config X86
 	select HAVE_KRETPROBES
 	select HAVE_OPTPROBES
 	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FENTRY if X86_64
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
@@ -60,6 +63,8 @@ config X86
 	select HAVE_MIXED_BREAKPOINTS_REGS
 	select PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
 	select ANON_INODES
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB && !M386
 	select HAVE_CMPXCHG_LOCAL if !M386
@@ -97,9 +102,12 @@ config X86
 	select KTIME_SCALAR if X86_32
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
+	select HAVE_RCU_USER_QS if X86_64
+	select HAVE_IRQ_TIME_ACCOUNTING
 
 config INSTRUCTION_DECODER
-	def_bool (KPROBES || PERF_EVENTS || UPROBES)
+	def_bool y
+	depends on KPROBES || PERF_EVENTS || UPROBES
 
 config OUTPUT_FORMAT
 	string
@@ -127,13 +135,15 @@ config SBUS
 	bool
 
 config NEED_DMA_MAP_STATE
-       def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG)
+	def_bool y
+	depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG
 
 config NEED_SG_DMA_LENGTH
 	def_bool y
 
 config GENERIC_ISA_DMA
-	def_bool ISA_DMA_API
+	def_bool y
+	depends on ISA_DMA_API
 
 config GENERIC_BUG
 	def_bool y
@@ -150,13 +160,16 @@ config GENERIC_GPIO
 	bool
 
 config ARCH_MAY_HAVE_PC_FDC
-	def_bool ISA_DMA_API
+	def_bool y
+	depends on ISA_DMA_API
 
 config RWSEM_GENERIC_SPINLOCK
-	def_bool !X86_XADD
+	def_bool y
+	depends on !X86_XADD
 
 config RWSEM_XCHGADD_ALGORITHM
-	def_bool X86_XADD
+	def_bool y
+	depends on X86_XADD
 
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
@@ -573,23 +586,18 @@ config PARAVIRT_TIME_ACCOUNTING
 
 source "arch/x86/xen/Kconfig"
 
-config KVM_CLOCK
-	bool "KVM paravirtualized clock"
-	select PARAVIRT
-	select PARAVIRT_CLOCK
-	---help---
-	  Turning on this option will allow you to run a paravirtualized clock
-	  when running over the KVM hypervisor. Instead of relying on a PIT
-	  (or probably other) emulation by the underlying device model, the host
-	  provides the guest with timing infrastructure such as time of day, and
-	  system time
-
 config KVM_GUEST
-	bool "KVM Guest support"
+	bool "KVM Guest support (including kvmclock)"
+	select PARAVIRT
 	select PARAVIRT
+	select PARAVIRT_CLOCK
+	default y if PARAVIRT_GUEST
 	---help---
 	  This option enables various optimizations for running under the KVM
-	  hypervisor.
+	  hypervisor. It includes a paravirtualized clock, so that instead
+	  of relying on a PIT (or probably other) emulation by the
+	  underlying device model, the host provides the guest with
+	  timing infrastructure such as time of day, and system time
 
 source "arch/x86/lguest/Kconfig"
 
@@ -746,13 +754,14 @@ config SWIOTLB
 	def_bool y if X86_64
 	---help---
 	  Support for software bounce buffers used on x86-64 systems
-	  which don't have a hardware IOMMU (e.g. the current generation
-	  of Intel's x86-64 CPUs). Using this PCI devices which can only
-	  access 32-bits of memory can be used on systems with more than
-	  3 GB of memory. If unsure, say Y.
+	  which don't have a hardware IOMMU. Using this PCI devices
+	  which can only access 32-bits of memory can be used on systems
+	  with more than 3 GB of memory.
+	  If unsure, say Y.
 
 config IOMMU_HELPER
-	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+	def_bool y
+	depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU
 
 config MAXSMP
 	bool "Enable Maximum number of SMP Processors and NUMA Nodes"
@@ -796,17 +805,6 @@ config SCHED_MC
 	  making when dealing with multi-core CPU chips at a cost of slightly
 	  increased overhead in some places. If unsure say N here.
 
-config IRQ_TIME_ACCOUNTING
-	bool "Fine granularity task level IRQ time accounting"
-	default n
-	---help---
-	  Select this option to enable fine granularity task irq time
-	  accounting. This is done by reading a timestamp on each
-	  transitions between softirq and hardirq state, so there can be a
-	  small performance impact.
-
-	  If in doubt, say N here.
-
 source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
@@ -871,6 +869,7 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 
 config X86_MCE
 	bool "Machine Check / overheating reporting"
+	default y
 	---help---
 	  Machine Check support allows the processor to notify the
 	  kernel if it detects a problem (e.g. overheating, data corruption).
@@ -982,25 +981,25 @@ config X86_REBOOTFIXUPS
 	  Say N otherwise.
 
 config MICROCODE
-	tristate "/dev/cpu/microcode - microcode support"
+	tristate "CPU microcode loading support"
 	select FW_LOADER
 	---help---
+
 	  If you say Y here, you will be able to update the microcode on
 	  certain Intel and AMD processors. The Intel support is for the
-	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
-	  Pentium 4, Xeon etc. The AMD support is for family 0x10 and
-	  0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
-	  You will obviously need the actual microcode binary data itself
-	  which is not shipped with the Linux kernel.
+	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4,
+	  Xeon etc. The AMD support is for families 0x10 and later. You will
+	  obviously need the actual microcode binary data itself which is not
+	  shipped with the Linux kernel.
 
 	  This option selects the general module only, you need to select
 	  at least one vendor specific module as well.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called microcode.
+	  To compile this driver as a module, choose M here: the module
+	  will be called microcode.
 
 config MICROCODE_INTEL
-	bool "Intel microcode patch loading support"
+	bool "Intel microcode loading support"
 	depends on MICROCODE
 	default MICROCODE
 	select FW_LOADER
@@ -1013,7 +1012,7 @@ config MICROCODE_INTEL
 	  <http://www.urbanmyth.org/microcode/>.
 
 config MICROCODE_AMD
-	bool "AMD microcode patch loading support"
+	bool "AMD microcode loading support"
 	depends on MICROCODE
 	select FW_LOADER
 	---help---
@@ -1159,10 +1158,12 @@ config X86_PAE
 	  consumes more pagetable space per process.
 
 config ARCH_PHYS_ADDR_T_64BIT
-	def_bool X86_64 || X86_PAE
+	def_bool y
+	depends on X86_64 || X86_PAE
 
 config ARCH_DMA_ADDR_T_64BIT
-	def_bool X86_64 || HIGHMEM64G
+	def_bool y
+	depends on X86_64 || HIGHMEM64G
 
 config DIRECT_GBPAGES
 	bool "Enable 1GB pages for kernel pagetables" if EXPERT
@@ -1285,8 +1286,8 @@ config ARCH_SELECT_MEMORY_MODEL
 	depends on ARCH_SPARSEMEM_ENABLE
 
 config ARCH_MEMORY_PROBE
-	def_bool X86_64
-	depends on MEMORY_HOTPLUG
+	def_bool y
+	depends on X86_64 && MEMORY_HOTPLUG
 
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
@@ -1487,6 +1488,17 @@ config ARCH_RANDOM
 	  If supported, this is a high bandwidth, cryptographically
 	  secure hardware random number generator.
 
+config X86_SMAP
+	def_bool y
+	prompt "Supervisor Mode Access Prevention" if EXPERT
+	---help---
+	  Supervisor Mode Access Prevention (SMAP) is a security
+	  feature in newer Intel processors.  There is a small
+	  performance cost if this enabled and turned on; there is
+	  also a small increase in the kernel size if this is enabled.
+
+	  If unsure, say Y.
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
@@ -1527,7 +1539,7 @@ config SECCOMP
 	  If unsure, say Y. Only embedded should say N here.
 
 config CC_STACKPROTECTOR
-	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	bool "Enable -fstack-protector buffer overflow detection"
 	---help---
 	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
@@ -1975,7 +1987,6 @@ config PCI_MMCONFIG
 
 config PCI_CNB20LE_QUIRK
 	bool "Read CNB20LE Host Bridge Windows" if EXPERT
-	default n
 	depends on PCI && EXPERIMENTAL
 	help
 	  Read the PCI windows out of the CNB20LE host bridge. This allows
@@ -2186,18 +2197,18 @@ config COMPAT
 	depends on IA32_EMULATION || X86_X32
 	select ARCH_WANT_OLD_COMPAT_IPC
 
+if COMPAT
 config COMPAT_FOR_U64_ALIGNMENT
-	def_bool COMPAT
-	depends on X86_64
+	def_bool y
 
 config SYSVIPC_COMPAT
 	def_bool y
-	depends on COMPAT && SYSVIPC
+	depends on SYSVIPC
 
 config KEYS_COMPAT
-	bool
-	depends on COMPAT && KEYS
-	default y
+	def_bool y
+	depends on KEYS
+endif
 
 endmenu
 
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 706e12e9984b..f3b86d0df44e 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -306,7 +306,8 @@ config X86_INTERNODE_CACHE_SHIFT
 	default X86_L1_CACHE_SHIFT
 
 config X86_CMPXCHG
-	def_bool X86_64 || (X86_32 && !M386)
+	def_bool y
+	depends on X86_64 || (X86_32 && !M386)
 
 config X86_L1_CACHE_SHIFT
 	int
@@ -317,7 +318,7 @@ config X86_L1_CACHE_SHIFT
 
 config X86_XADD
 	def_bool y
-	depends on X86_64 || !M386
+	depends on !M386
 
 config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index cb8ac935df82..58790bd85c1d 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y)
 
         KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
 
+        # Never want PIC in a 32-bit kernel, prevent breakage with GCC built
+        # with nonstandard options
+        KBUILD_CFLAGS += -fno-pic
+
         # prevent gcc from keeping the stack 16 byte aligned
         KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
 
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 5a747dd884db..ce03476d8c8f 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -37,7 +37,7 @@ setup-y		+= video-bios.o
 targets		+= $(setup-y)
 hostprogs-y	:= mkcpustr tools/build
 
-HOST_EXTRACFLAGS += -I$(srctree)/tools/include $(LINUXINCLUDE) \
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include $(USERINCLUDE) \
 	            -D__EXPORTED_HEADERS__
 
 $(obj)/cpu.o: $(obj)/cpustr.h
@@ -52,12 +52,12 @@ $(obj)/cpustr.h: $(obj)/mkcpustr FORCE
 
 # How to compile the 16-bit code.  Note we always compile for -march=i386,
 # that way we can complain to the user if the CPU is insufficient.
-KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
+KBUILD_CFLAGS	:= $(USERINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 		   -DDISABLE_BRANCH_PROFILING \
 		   -Wall -Wstrict-prototypes \
 		   -march=i386 -mregparm=3 \
 		   -include $(srctree)/$(src)/code16gcc.h \
-		   -fno-strict-aliasing -fomit-frame-pointer \
+		   -fno-strict-aliasing -fomit-frame-pointer -fno-pic \
 		   $(call cc-option, -ffreestanding) \
 		   $(call cc-option, -fno-toplevel-reorder,\
 			$(call cc-option, -fno-unit-at-a-time)) \
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index e398bb5d63bb..8a84501acb1b 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -28,6 +28,9 @@ VMLINUX_OBJS = $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o \
 	$(obj)/string.o $(obj)/cmdline.o $(obj)/early_serial_console.o \
 	$(obj)/piggy.o
 
+$(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
+$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone
+
 ifeq ($(CONFIG_EFI_STUB), y)
 	VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
 endif
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index b3e0227df2c9..c760e073963e 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -276,8 +276,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 	nr_gops = size / sizeof(void *);
 	for (i = 0; i < nr_gops; i++) {
 		struct efi_graphics_output_mode_info *info;
-		efi_guid_t pciio_proto = EFI_PCI_IO_PROTOCOL_GUID;
-		void *pciio;
+		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
+		bool conout_found = false;
+		void *dummy;
 		void *h = gop_handle[i];
 
 		status = efi_call_phys3(sys_table->boottime->handle_protocol,
@@ -285,19 +286,21 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 		if (status != EFI_SUCCESS)
 			continue;
 
-		efi_call_phys3(sys_table->boottime->handle_protocol,
-			       h, &pciio_proto, &pciio);
+		status = efi_call_phys3(sys_table->boottime->handle_protocol,
+					h, &conout_proto, &dummy);
+
+		if (status == EFI_SUCCESS)
+			conout_found = true;
 
 		status = efi_call_phys4(gop->query_mode, gop,
 					gop->mode->mode, &size, &info);
-		if (status == EFI_SUCCESS && (!first_gop || pciio)) {
+		if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
 			/*
-			 * Apple provide GOPs that are not backed by
-			 * real hardware (they're used to handle
-			 * multiple displays). The workaround is to
-			 * search for a GOP implementing the PCIIO
-			 * protocol, and if one isn't found, to just
-			 * fallback to the first GOP.
+			 * Systems that use the UEFI Console Splitter may
+			 * provide multiple GOP devices, not all of which are
+			 * backed by real hardware. The workaround is to search
+			 * for a GOP implementing the ConOut protocol, and if
+			 * one isn't found, to just fall back to the first GOP.
 			 */
 			width = info->horizontal_resolution;
 			height = info->vertical_resolution;
@@ -308,10 +311,10 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 			pixels_per_scan_line = info->pixels_per_scan_line;
 
 			/*
-			 * Once we've found a GOP supporting PCIIO,
+			 * Once we've found a GOP supporting ConOut,
 			 * don't bother looking any further.
 			 */
-			if (pciio)
+			if (conout_found)
 				break;
 
 			first_gop = gop;
@@ -328,7 +331,6 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 	si->lfb_width = width;
 	si->lfb_height = height;
 	si->lfb_base = fb_base;
-	si->lfb_size = fb_size;
 	si->pages = 1;
 
 	if (pixel_format == PIXEL_RGB_RESERVED_8BIT_PER_COLOR) {
@@ -376,6 +378,10 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 		si->rsvd_pos = 0;
 	}
 
+	si->lfb_size = si->lfb_linelength * si->lfb_height;
+
+	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
+
 free_handle:
 	efi_call_phys1(sys_table->boottime->free_pool, gop_handle);
 	return status;
diff --git a/arch/x86/boot/compressed/eboot.h b/arch/x86/boot/compressed/eboot.h
index 3b6e15627c55..e5b0a8f91c5f 100644
--- a/arch/x86/boot/compressed/eboot.h
+++ b/arch/x86/boot/compressed/eboot.h
@@ -14,6 +14,10 @@
 #define EFI_PAGE_SIZE		(1UL << EFI_PAGE_SHIFT)
 #define EFI_READ_CHUNK_SIZE	(1024 * 1024)
 
+#define EFI_CONSOLE_OUT_DEVICE_GUID    \
+	EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x0, 0x90, 0x27, \
+		  0x3f, 0xc1, 0x4d)
+
 #define PIXEL_RGB_RESERVED_8BIT_PER_COLOR		0
 #define PIXEL_BGR_RESERVED_8BIT_PER_COLOR		1
 #define PIXEL_BIT_MASK					2
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index b4e15dd6786a..2a017441b8b2 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -32,10 +32,6 @@ SYSSEG		= 0x1000		/* historical load address >> 4 */
 #define SVGA_MODE ASK_VGA
 #endif
 
-#ifndef RAMDISK
-#define RAMDISK 0
-#endif
-
 #ifndef ROOT_RDONLY
 #define ROOT_RDONLY 1
 #endif
diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c
index 919257f526f2..4579eff0ef4d 100644
--- a/arch/x86/boot/mkcpustr.c
+++ b/arch/x86/boot/mkcpustr.c
@@ -15,6 +15,8 @@
 
 #include <stdio.h>
 
+#include "../include/asm/required-features.h"
+#include "../include/asm/cpufeature.h"
 #include "../kernel/cpu/capflags.c"
 
 int main(void)
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 119db67dcb03..5598547281a7 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -8,6 +8,8 @@ CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_FREEZER=y
@@ -34,8 +36,6 @@ CONFIG_SGI_PARTITION=y
 CONFIG_SUN_PARTITION=y
 CONFIG_KARMA_PARTITION=y
 CONFIG_EFI_PARTITION=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_X86_GENERIC=y
 CONFIG_HPET_TIMER=y
@@ -144,8 +144,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEBUG_DEVRES=y
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
@@ -231,8 +229,6 @@ CONFIG_SND_HRTIMER=y
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
 CONFIG_HIDRAW=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
 CONFIG_HID_GYRATION=y
 CONFIG_LOGITECH_FF=y
 CONFIG_HID_NTRIG=y
@@ -243,11 +239,11 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -262,10 +258,9 @@ CONFIG_RTC_CLASS=y
 CONFIG_DMADEVICES=y
 CONFIG_EEEPC_LAPTOP=y
 CONFIG_EFI_VARS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -280,7 +275,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
@@ -299,13 +293,11 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_RODATA_TEST is not set
-CONFIG_DEBUG_NX_TEST=m
 CONFIG_DEBUG_BOOT_PARAMS=y
 CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
@@ -316,4 +308,3 @@ CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_CRYPTO_AES_586=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 76eb2903809f..671524d0f6c0 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -8,6 +8,8 @@ CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_FREEZER=y
@@ -34,8 +36,6 @@ CONFIG_SGI_PARTITION=y
 CONFIG_SUN_PARTITION=y
 CONFIG_KARMA_PARTITION=y
 CONFIG_EFI_PARTITION=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_NR_CPUS=64
@@ -144,8 +144,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEBUG_DEVRES=y
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
@@ -227,8 +225,6 @@ CONFIG_SND_HRTIMER=y
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
 CONFIG_HIDRAW=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
 CONFIG_HID_GYRATION=y
 CONFIG_LOGITECH_FF=y
 CONFIG_HID_NTRIG=y
@@ -239,11 +235,11 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -262,10 +258,9 @@ CONFIG_AMD_IOMMU_STATS=y
 CONFIG_INTEL_IOMMU=y
 # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
 CONFIG_EFI_VARS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -280,7 +275,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
@@ -298,13 +292,11 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_RODATA_TEST is not set
-CONFIG_DEBUG_NX_TEST=m
 CONFIG_DEBUG_BOOT_PARAMS=y
 CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
@@ -314,4 +306,3 @@ CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index e908e5de82d3..5bacb4a226ac 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -12,6 +12,8 @@ obj-$(CONFIG_CRYPTO_SERPENT_SSE2_586) += serpent-sse2-i586.o
 
 obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
 obj-$(CONFIG_CRYPTO_CAMELLIA_X86_64) += camellia-x86_64.o
+obj-$(CONFIG_CRYPTO_CAST5_AVX_X86_64) += cast5-avx-x86_64.o
+obj-$(CONFIG_CRYPTO_CAST6_AVX_X86_64) += cast6-avx-x86_64.o
 obj-$(CONFIG_CRYPTO_BLOWFISH_X86_64) += blowfish-x86_64.o
 obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
 obj-$(CONFIG_CRYPTO_TWOFISH_X86_64_3WAY) += twofish-x86_64-3way.o
@@ -32,6 +34,8 @@ serpent-sse2-i586-y := serpent-sse2-i586-asm_32.o serpent_sse2_glue.o
 
 aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o
 camellia-x86_64-y := camellia-x86_64-asm_64.o camellia_glue.o
+cast5-avx-x86_64-y := cast5-avx-x86_64-asm_64.o cast5_avx_glue.o
+cast6-avx-x86_64-y := cast6-avx-x86_64-asm_64.o cast6_avx_glue.o
 blowfish-x86_64-y := blowfish-x86_64-asm_64.o blowfish_glue.o
 twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
 twofish-x86_64-3way-y := twofish-x86_64-asm_64-3way.o twofish_glue_3way.o
diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c
index 59b37deb8c8d..aafe8ce0d65d 100644
--- a/arch/x86/crypto/aes_glue.c
+++ b/arch/x86/crypto/aes_glue.c
@@ -40,7 +40,6 @@ static struct crypto_alg aes_alg = {
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(aes_alg.cra_list),
 	.cra_u	= {
 		.cipher	= {
 			.cia_min_keysize	= AES_MIN_KEY_SIZE,
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 34fdcff4d2c8..7c04d0da709b 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -28,6 +28,9 @@
 #include <crypto/aes.h>
 #include <crypto/cryptd.h>
 #include <crypto/ctr.h>
+#include <crypto/b128ops.h>
+#include <crypto/lrw.h>
+#include <crypto/xts.h>
 #include <asm/cpu_device_id.h>
 #include <asm/i387.h>
 #include <asm/crypto/aes.h>
@@ -41,18 +44,10 @@
 #define HAS_CTR
 #endif
 
-#if defined(CONFIG_CRYPTO_LRW) || defined(CONFIG_CRYPTO_LRW_MODULE)
-#define HAS_LRW
-#endif
-
 #if defined(CONFIG_CRYPTO_PCBC) || defined(CONFIG_CRYPTO_PCBC_MODULE)
 #define HAS_PCBC
 #endif
 
-#if defined(CONFIG_CRYPTO_XTS) || defined(CONFIG_CRYPTO_XTS_MODULE)
-#define HAS_XTS
-#endif
-
 /* This data is stored at the end of the crypto_tfm struct.
  * It's a type of per "session" data storage location.
  * This needs to be 16 byte aligned.
@@ -79,6 +74,16 @@ struct aesni_hash_subkey_req_data {
 #define AES_BLOCK_MASK	(~(AES_BLOCK_SIZE-1))
 #define RFC4106_HASH_SUBKEY_SIZE 16
 
+struct aesni_lrw_ctx {
+	struct lrw_table_ctx lrw_table;
+	u8 raw_aes_ctx[sizeof(struct crypto_aes_ctx) + AESNI_ALIGN - 1];
+};
+
+struct aesni_xts_ctx {
+	u8 raw_tweak_ctx[sizeof(struct crypto_aes_ctx) + AESNI_ALIGN - 1];
+	u8 raw_crypt_ctx[sizeof(struct crypto_aes_ctx) + AESNI_ALIGN - 1];
+};
+
 asmlinkage int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key,
 			     unsigned int key_len);
 asmlinkage void aesni_enc(struct crypto_aes_ctx *ctx, u8 *out,
@@ -398,13 +403,6 @@ static int ablk_rfc3686_ctr_init(struct crypto_tfm *tfm)
 #endif
 #endif
 
-#ifdef HAS_LRW
-static int ablk_lrw_init(struct crypto_tfm *tfm)
-{
-	return ablk_init_common(tfm, "fpu(lrw(__driver-aes-aesni))");
-}
-#endif
-
 #ifdef HAS_PCBC
 static int ablk_pcbc_init(struct crypto_tfm *tfm)
 {
@@ -412,12 +410,160 @@ static int ablk_pcbc_init(struct crypto_tfm *tfm)
 }
 #endif
 
-#ifdef HAS_XTS
-static int ablk_xts_init(struct crypto_tfm *tfm)
+static void lrw_xts_encrypt_callback(void *ctx, u8 *blks, unsigned int nbytes)
 {
-	return ablk_init_common(tfm, "fpu(xts(__driver-aes-aesni))");
+	aesni_ecb_enc(ctx, blks, blks, nbytes);
+}
+
+static void lrw_xts_decrypt_callback(void *ctx, u8 *blks, unsigned int nbytes)
+{
+	aesni_ecb_dec(ctx, blks, blks, nbytes);
+}
+
+static int lrw_aesni_setkey(struct crypto_tfm *tfm, const u8 *key,
+			    unsigned int keylen)
+{
+	struct aesni_lrw_ctx *ctx = crypto_tfm_ctx(tfm);
+	int err;
+
+	err = aes_set_key_common(tfm, ctx->raw_aes_ctx, key,
+				 keylen - AES_BLOCK_SIZE);
+	if (err)
+		return err;
+
+	return lrw_init_table(&ctx->lrw_table, key + keylen - AES_BLOCK_SIZE);
+}
+
+static void lrw_aesni_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct aesni_lrw_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	lrw_free_table(&ctx->lrw_table);
+}
+
+static int lrw_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesni_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[8];
+	struct lrw_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.table_ctx = &ctx->lrw_table,
+		.crypt_ctx = aes_ctx(ctx->raw_aes_ctx),
+		.crypt_fn = lrw_xts_encrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	kernel_fpu_begin();
+	ret = lrw_crypt(desc, dst, src, nbytes, &req);
+	kernel_fpu_end();
+
+	return ret;
+}
+
+static int lrw_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesni_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[8];
+	struct lrw_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.table_ctx = &ctx->lrw_table,
+		.crypt_ctx = aes_ctx(ctx->raw_aes_ctx),
+		.crypt_fn = lrw_xts_decrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	kernel_fpu_begin();
+	ret = lrw_crypt(desc, dst, src, nbytes, &req);
+	kernel_fpu_end();
+
+	return ret;
+}
+
+static int xts_aesni_setkey(struct crypto_tfm *tfm, const u8 *key,
+			    unsigned int keylen)
+{
+	struct aesni_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+	u32 *flags = &tfm->crt_flags;
+	int err;
+
+	/* key consists of keys of equal size concatenated, therefore
+	 * the length must be even
+	 */
+	if (keylen % 2) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	/* first half of xts-key is for crypt */
+	err = aes_set_key_common(tfm, ctx->raw_crypt_ctx, key, keylen / 2);
+	if (err)
+		return err;
+
+	/* second half of xts-key is for tweak */
+	return aes_set_key_common(tfm, ctx->raw_tweak_ctx, key + keylen / 2,
+				  keylen / 2);
+}
+
+
+static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesni_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[8];
+	struct xts_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.tweak_ctx = aes_ctx(ctx->raw_tweak_ctx),
+		.tweak_fn = XTS_TWEAK_CAST(aesni_enc),
+		.crypt_ctx = aes_ctx(ctx->raw_crypt_ctx),
+		.crypt_fn = lrw_xts_encrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	kernel_fpu_begin();
+	ret = xts_crypt(desc, dst, src, nbytes, &req);
+	kernel_fpu_end();
+
+	return ret;
+}
+
+static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct aesni_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[8];
+	struct xts_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.tweak_ctx = aes_ctx(ctx->raw_tweak_ctx),
+		.tweak_fn = XTS_TWEAK_CAST(aesni_enc),
+		.crypt_ctx = aes_ctx(ctx->raw_crypt_ctx),
+		.crypt_fn = lrw_xts_decrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	kernel_fpu_begin();
+	ret = xts_crypt(desc, dst, src, nbytes, &req);
+	kernel_fpu_end();
+
+	return ret;
 }
-#endif
 
 #ifdef CONFIG_X86_64
 static int rfc4106_init(struct crypto_tfm *tfm)
@@ -1035,10 +1181,10 @@ static struct crypto_alg aesni_algs[] = { {
 	},
 #endif
 #endif
-#ifdef HAS_LRW
+#ifdef HAS_PCBC
 }, {
-	.cra_name		= "lrw(aes)",
-	.cra_driver_name	= "lrw-aes-aesni",
+	.cra_name		= "pcbc(aes)",
+	.cra_driver_name	= "pcbc-aes-aesni",
 	.cra_priority		= 400,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= AES_BLOCK_SIZE,
@@ -1046,12 +1192,12 @@ static struct crypto_alg aesni_algs[] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_init		= ablk_lrw_init,
+	.cra_init		= ablk_pcbc_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
 		.ablkcipher = {
-			.min_keysize	= AES_MIN_KEY_SIZE + AES_BLOCK_SIZE,
-			.max_keysize	= AES_MAX_KEY_SIZE + AES_BLOCK_SIZE,
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
 			.ivsize		= AES_BLOCK_SIZE,
 			.setkey		= ablk_set_key,
 			.encrypt	= ablk_encrypt,
@@ -1059,10 +1205,50 @@ static struct crypto_alg aesni_algs[] = { {
 		},
 	},
 #endif
-#ifdef HAS_PCBC
 }, {
-	.cra_name		= "pcbc(aes)",
-	.cra_driver_name	= "pcbc-aes-aesni",
+	.cra_name		= "__lrw-aes-aesni",
+	.cra_driver_name	= "__driver-lrw-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct aesni_lrw_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_exit		= lrw_aesni_exit_tfm,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE + AES_BLOCK_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE + AES_BLOCK_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= lrw_aesni_setkey,
+			.encrypt	= lrw_encrypt,
+			.decrypt	= lrw_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "__xts-aes-aesni",
+	.cra_driver_name	= "__driver-xts-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct aesni_xts_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+			.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= xts_aesni_setkey,
+			.encrypt	= xts_encrypt,
+			.decrypt	= xts_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "lrw(aes)",
+	.cra_driver_name	= "lrw-aes-aesni",
 	.cra_priority		= 400,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= AES_BLOCK_SIZE,
@@ -1070,20 +1256,18 @@ static struct crypto_alg aesni_algs[] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_init		= ablk_pcbc_init,
+	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
 		.ablkcipher = {
-			.min_keysize	= AES_MIN_KEY_SIZE,
-			.max_keysize	= AES_MAX_KEY_SIZE,
+			.min_keysize	= AES_MIN_KEY_SIZE + AES_BLOCK_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE + AES_BLOCK_SIZE,
 			.ivsize		= AES_BLOCK_SIZE,
 			.setkey		= ablk_set_key,
 			.encrypt	= ablk_encrypt,
 			.decrypt	= ablk_decrypt,
 		},
 	},
-#endif
-#ifdef HAS_XTS
 }, {
 	.cra_name		= "xts(aes)",
 	.cra_driver_name	= "xts-aes-aesni",
@@ -1094,7 +1278,7 @@ static struct crypto_alg aesni_algs[] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_init		= ablk_xts_init,
+	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
 		.ablkcipher = {
@@ -1106,7 +1290,6 @@ static struct crypto_alg aesni_algs[] = { {
 			.decrypt	= ablk_decrypt,
 		},
 	},
-#endif
 } };
 
 
@@ -1118,7 +1301,7 @@ MODULE_DEVICE_TABLE(x86cpu, aesni_cpu_id);
 
 static int __init aesni_init(void)
 {
-	int err, i;
+	int err;
 
 	if (!x86_match_cpu(aesni_cpu_id))
 		return -ENODEV;
@@ -1127,9 +1310,6 @@ static int __init aesni_init(void)
 	if (err)
 		return err;
 
-	for (i = 0; i < ARRAY_SIZE(aesni_algs); i++)
-		INIT_LIST_HEAD(&aesni_algs[i].cra_list);
-
 	return crypto_register_algs(aesni_algs, ARRAY_SIZE(aesni_algs));
 }
 
diff --git a/arch/x86/crypto/blowfish_glue.c b/arch/x86/crypto/blowfish_glue.c
index 7967474de8f7..50ec333b70e6 100644
--- a/arch/x86/crypto/blowfish_glue.c
+++ b/arch/x86/crypto/blowfish_glue.c
@@ -367,7 +367,6 @@ static struct crypto_alg bf_algs[4] = { {
 	.cra_ctxsize		= sizeof(struct bf_ctx),
 	.cra_alignmask		= 0,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(bf_algs[0].cra_list),
 	.cra_u = {
 		.cipher = {
 			.cia_min_keysize	= BF_MIN_KEY_SIZE,
@@ -387,7 +386,6 @@ static struct crypto_alg bf_algs[4] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(bf_algs[1].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= BF_MIN_KEY_SIZE,
@@ -407,7 +405,6 @@ static struct crypto_alg bf_algs[4] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(bf_algs[2].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= BF_MIN_KEY_SIZE,
@@ -428,7 +425,6 @@ static struct crypto_alg bf_algs[4] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(bf_algs[3].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= BF_MIN_KEY_SIZE,
diff --git a/arch/x86/crypto/camellia_glue.c b/arch/x86/crypto/camellia_glue.c
index eeb2b3b743e9..42ffd2bbab5b 100644
--- a/arch/x86/crypto/camellia_glue.c
+++ b/arch/x86/crypto/camellia_glue.c
@@ -92,715 +92,715 @@ static void camellia_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 
 /* camellia sboxes */
 const u64 camellia_sp10011110[256] = {
-	0x7000007070707000, 0x8200008282828200, 0x2c00002c2c2c2c00,
-	0xec0000ecececec00, 0xb30000b3b3b3b300, 0x2700002727272700,
-	0xc00000c0c0c0c000, 0xe50000e5e5e5e500, 0xe40000e4e4e4e400,
-	0x8500008585858500, 0x5700005757575700, 0x3500003535353500,
-	0xea0000eaeaeaea00, 0x0c00000c0c0c0c00, 0xae0000aeaeaeae00,
-	0x4100004141414100, 0x2300002323232300, 0xef0000efefefef00,
-	0x6b00006b6b6b6b00, 0x9300009393939300, 0x4500004545454500,
-	0x1900001919191900, 0xa50000a5a5a5a500, 0x2100002121212100,
-	0xed0000edededed00, 0x0e00000e0e0e0e00, 0x4f00004f4f4f4f00,
-	0x4e00004e4e4e4e00, 0x1d00001d1d1d1d00, 0x6500006565656500,
-	0x9200009292929200, 0xbd0000bdbdbdbd00, 0x8600008686868600,
-	0xb80000b8b8b8b800, 0xaf0000afafafaf00, 0x8f00008f8f8f8f00,
-	0x7c00007c7c7c7c00, 0xeb0000ebebebeb00, 0x1f00001f1f1f1f00,
-	0xce0000cececece00, 0x3e00003e3e3e3e00, 0x3000003030303000,
-	0xdc0000dcdcdcdc00, 0x5f00005f5f5f5f00, 0x5e00005e5e5e5e00,
-	0xc50000c5c5c5c500, 0x0b00000b0b0b0b00, 0x1a00001a1a1a1a00,
-	0xa60000a6a6a6a600, 0xe10000e1e1e1e100, 0x3900003939393900,
-	0xca0000cacacaca00, 0xd50000d5d5d5d500, 0x4700004747474700,
-	0x5d00005d5d5d5d00, 0x3d00003d3d3d3d00, 0xd90000d9d9d9d900,
-	0x0100000101010100, 0x5a00005a5a5a5a00, 0xd60000d6d6d6d600,
-	0x5100005151515100, 0x5600005656565600, 0x6c00006c6c6c6c00,
-	0x4d00004d4d4d4d00, 0x8b00008b8b8b8b00, 0x0d00000d0d0d0d00,
-	0x9a00009a9a9a9a00, 0x6600006666666600, 0xfb0000fbfbfbfb00,
-	0xcc0000cccccccc00, 0xb00000b0b0b0b000, 0x2d00002d2d2d2d00,
-	0x7400007474747400, 0x1200001212121200, 0x2b00002b2b2b2b00,
-	0x2000002020202000, 0xf00000f0f0f0f000, 0xb10000b1b1b1b100,
-	0x8400008484848400, 0x9900009999999900, 0xdf0000dfdfdfdf00,
-	0x4c00004c4c4c4c00, 0xcb0000cbcbcbcb00, 0xc20000c2c2c2c200,
-	0x3400003434343400, 0x7e00007e7e7e7e00, 0x7600007676767600,
-	0x0500000505050500, 0x6d00006d6d6d6d00, 0xb70000b7b7b7b700,
-	0xa90000a9a9a9a900, 0x3100003131313100, 0xd10000d1d1d1d100,
-	0x1700001717171700, 0x0400000404040400, 0xd70000d7d7d7d700,
-	0x1400001414141400, 0x5800005858585800, 0x3a00003a3a3a3a00,
-	0x6100006161616100, 0xde0000dededede00, 0x1b00001b1b1b1b00,
-	0x1100001111111100, 0x1c00001c1c1c1c00, 0x3200003232323200,
-	0x0f00000f0f0f0f00, 0x9c00009c9c9c9c00, 0x1600001616161600,
-	0x5300005353535300, 0x1800001818181800, 0xf20000f2f2f2f200,
-	0x2200002222222200, 0xfe0000fefefefe00, 0x4400004444444400,
-	0xcf0000cfcfcfcf00, 0xb20000b2b2b2b200, 0xc30000c3c3c3c300,
-	0xb50000b5b5b5b500, 0x7a00007a7a7a7a00, 0x9100009191919100,
-	0x2400002424242400, 0x0800000808080800, 0xe80000e8e8e8e800,
-	0xa80000a8a8a8a800, 0x6000006060606000, 0xfc0000fcfcfcfc00,
-	0x6900006969696900, 0x5000005050505000, 0xaa0000aaaaaaaa00,
-	0xd00000d0d0d0d000, 0xa00000a0a0a0a000, 0x7d00007d7d7d7d00,
-	0xa10000a1a1a1a100, 0x8900008989898900, 0x6200006262626200,
-	0x9700009797979700, 0x5400005454545400, 0x5b00005b5b5b5b00,
-	0x1e00001e1e1e1e00, 0x9500009595959500, 0xe00000e0e0e0e000,
-	0xff0000ffffffff00, 0x6400006464646400, 0xd20000d2d2d2d200,
-	0x1000001010101000, 0xc40000c4c4c4c400, 0x0000000000000000,
-	0x4800004848484800, 0xa30000a3a3a3a300, 0xf70000f7f7f7f700,
-	0x7500007575757500, 0xdb0000dbdbdbdb00, 0x8a00008a8a8a8a00,
-	0x0300000303030300, 0xe60000e6e6e6e600, 0xda0000dadadada00,
-	0x0900000909090900, 0x3f00003f3f3f3f00, 0xdd0000dddddddd00,
-	0x9400009494949400, 0x8700008787878700, 0x5c00005c5c5c5c00,
-	0x8300008383838300, 0x0200000202020200, 0xcd0000cdcdcdcd00,
-	0x4a00004a4a4a4a00, 0x9000009090909000, 0x3300003333333300,
-	0x7300007373737300, 0x6700006767676700, 0xf60000f6f6f6f600,
-	0xf30000f3f3f3f300, 0x9d00009d9d9d9d00, 0x7f00007f7f7f7f00,
-	0xbf0000bfbfbfbf00, 0xe20000e2e2e2e200, 0x5200005252525200,
-	0x9b00009b9b9b9b00, 0xd80000d8d8d8d800, 0x2600002626262600,
-	0xc80000c8c8c8c800, 0x3700003737373700, 0xc60000c6c6c6c600,
-	0x3b00003b3b3b3b00, 0x8100008181818100, 0x9600009696969600,
-	0x6f00006f6f6f6f00, 0x4b00004b4b4b4b00, 0x1300001313131300,
-	0xbe0000bebebebe00, 0x6300006363636300, 0x2e00002e2e2e2e00,
-	0xe90000e9e9e9e900, 0x7900007979797900, 0xa70000a7a7a7a700,
-	0x8c00008c8c8c8c00, 0x9f00009f9f9f9f00, 0x6e00006e6e6e6e00,
-	0xbc0000bcbcbcbc00, 0x8e00008e8e8e8e00, 0x2900002929292900,
-	0xf50000f5f5f5f500, 0xf90000f9f9f9f900, 0xb60000b6b6b6b600,
-	0x2f00002f2f2f2f00, 0xfd0000fdfdfdfd00, 0xb40000b4b4b4b400,
-	0x5900005959595900, 0x7800007878787800, 0x9800009898989800,
-	0x0600000606060600, 0x6a00006a6a6a6a00, 0xe70000e7e7e7e700,
-	0x4600004646464600, 0x7100007171717100, 0xba0000babababa00,
-	0xd40000d4d4d4d400, 0x2500002525252500, 0xab0000abababab00,
-	0x4200004242424200, 0x8800008888888800, 0xa20000a2a2a2a200,
-	0x8d00008d8d8d8d00, 0xfa0000fafafafa00, 0x7200007272727200,
-	0x0700000707070700, 0xb90000b9b9b9b900, 0x5500005555555500,
-	0xf80000f8f8f8f800, 0xee0000eeeeeeee00, 0xac0000acacacac00,
-	0x0a00000a0a0a0a00, 0x3600003636363600, 0x4900004949494900,
-	0x2a00002a2a2a2a00, 0x6800006868686800, 0x3c00003c3c3c3c00,
-	0x3800003838383800, 0xf10000f1f1f1f100, 0xa40000a4a4a4a400,
-	0x4000004040404000, 0x2800002828282800, 0xd30000d3d3d3d300,
-	0x7b00007b7b7b7b00, 0xbb0000bbbbbbbb00, 0xc90000c9c9c9c900,
-	0x4300004343434300, 0xc10000c1c1c1c100, 0x1500001515151500,
-	0xe30000e3e3e3e300, 0xad0000adadadad00, 0xf40000f4f4f4f400,
-	0x7700007777777700, 0xc70000c7c7c7c700, 0x8000008080808000,
-	0x9e00009e9e9e9e00,
+	0x7000007070707000ULL, 0x8200008282828200ULL, 0x2c00002c2c2c2c00ULL,
+	0xec0000ecececec00ULL, 0xb30000b3b3b3b300ULL, 0x2700002727272700ULL,
+	0xc00000c0c0c0c000ULL, 0xe50000e5e5e5e500ULL, 0xe40000e4e4e4e400ULL,
+	0x8500008585858500ULL, 0x5700005757575700ULL, 0x3500003535353500ULL,
+	0xea0000eaeaeaea00ULL, 0x0c00000c0c0c0c00ULL, 0xae0000aeaeaeae00ULL,
+	0x4100004141414100ULL, 0x2300002323232300ULL, 0xef0000efefefef00ULL,
+	0x6b00006b6b6b6b00ULL, 0x9300009393939300ULL, 0x4500004545454500ULL,
+	0x1900001919191900ULL, 0xa50000a5a5a5a500ULL, 0x2100002121212100ULL,
+	0xed0000edededed00ULL, 0x0e00000e0e0e0e00ULL, 0x4f00004f4f4f4f00ULL,
+	0x4e00004e4e4e4e00ULL, 0x1d00001d1d1d1d00ULL, 0x6500006565656500ULL,
+	0x9200009292929200ULL, 0xbd0000bdbdbdbd00ULL, 0x8600008686868600ULL,
+	0xb80000b8b8b8b800ULL, 0xaf0000afafafaf00ULL, 0x8f00008f8f8f8f00ULL,
+	0x7c00007c7c7c7c00ULL, 0xeb0000ebebebeb00ULL, 0x1f00001f1f1f1f00ULL,
+	0xce0000cececece00ULL, 0x3e00003e3e3e3e00ULL, 0x3000003030303000ULL,
+	0xdc0000dcdcdcdc00ULL, 0x5f00005f5f5f5f00ULL, 0x5e00005e5e5e5e00ULL,
+	0xc50000c5c5c5c500ULL, 0x0b00000b0b0b0b00ULL, 0x1a00001a1a1a1a00ULL,
+	0xa60000a6a6a6a600ULL, 0xe10000e1e1e1e100ULL, 0x3900003939393900ULL,
+	0xca0000cacacaca00ULL, 0xd50000d5d5d5d500ULL, 0x4700004747474700ULL,
+	0x5d00005d5d5d5d00ULL, 0x3d00003d3d3d3d00ULL, 0xd90000d9d9d9d900ULL,
+	0x0100000101010100ULL, 0x5a00005a5a5a5a00ULL, 0xd60000d6d6d6d600ULL,
+	0x5100005151515100ULL, 0x5600005656565600ULL, 0x6c00006c6c6c6c00ULL,
+	0x4d00004d4d4d4d00ULL, 0x8b00008b8b8b8b00ULL, 0x0d00000d0d0d0d00ULL,
+	0x9a00009a9a9a9a00ULL, 0x6600006666666600ULL, 0xfb0000fbfbfbfb00ULL,
+	0xcc0000cccccccc00ULL, 0xb00000b0b0b0b000ULL, 0x2d00002d2d2d2d00ULL,
+	0x7400007474747400ULL, 0x1200001212121200ULL, 0x2b00002b2b2b2b00ULL,
+	0x2000002020202000ULL, 0xf00000f0f0f0f000ULL, 0xb10000b1b1b1b100ULL,
+	0x8400008484848400ULL, 0x9900009999999900ULL, 0xdf0000dfdfdfdf00ULL,
+	0x4c00004c4c4c4c00ULL, 0xcb0000cbcbcbcb00ULL, 0xc20000c2c2c2c200ULL,
+	0x3400003434343400ULL, 0x7e00007e7e7e7e00ULL, 0x7600007676767600ULL,
+	0x0500000505050500ULL, 0x6d00006d6d6d6d00ULL, 0xb70000b7b7b7b700ULL,
+	0xa90000a9a9a9a900ULL, 0x3100003131313100ULL, 0xd10000d1d1d1d100ULL,
+	0x1700001717171700ULL, 0x0400000404040400ULL, 0xd70000d7d7d7d700ULL,
+	0x1400001414141400ULL, 0x5800005858585800ULL, 0x3a00003a3a3a3a00ULL,
+	0x6100006161616100ULL, 0xde0000dededede00ULL, 0x1b00001b1b1b1b00ULL,
+	0x1100001111111100ULL, 0x1c00001c1c1c1c00ULL, 0x3200003232323200ULL,
+	0x0f00000f0f0f0f00ULL, 0x9c00009c9c9c9c00ULL, 0x1600001616161600ULL,
+	0x5300005353535300ULL, 0x1800001818181800ULL, 0xf20000f2f2f2f200ULL,
+	0x2200002222222200ULL, 0xfe0000fefefefe00ULL, 0x4400004444444400ULL,
+	0xcf0000cfcfcfcf00ULL, 0xb20000b2b2b2b200ULL, 0xc30000c3c3c3c300ULL,
+	0xb50000b5b5b5b500ULL, 0x7a00007a7a7a7a00ULL, 0x9100009191919100ULL,
+	0x2400002424242400ULL, 0x0800000808080800ULL, 0xe80000e8e8e8e800ULL,
+	0xa80000a8a8a8a800ULL, 0x6000006060606000ULL, 0xfc0000fcfcfcfc00ULL,
+	0x6900006969696900ULL, 0x5000005050505000ULL, 0xaa0000aaaaaaaa00ULL,
+	0xd00000d0d0d0d000ULL, 0xa00000a0a0a0a000ULL, 0x7d00007d7d7d7d00ULL,
+	0xa10000a1a1a1a100ULL, 0x8900008989898900ULL, 0x6200006262626200ULL,
+	0x9700009797979700ULL, 0x5400005454545400ULL, 0x5b00005b5b5b5b00ULL,
+	0x1e00001e1e1e1e00ULL, 0x9500009595959500ULL, 0xe00000e0e0e0e000ULL,
+	0xff0000ffffffff00ULL, 0x6400006464646400ULL, 0xd20000d2d2d2d200ULL,
+	0x1000001010101000ULL, 0xc40000c4c4c4c400ULL, 0x0000000000000000ULL,
+	0x4800004848484800ULL, 0xa30000a3a3a3a300ULL, 0xf70000f7f7f7f700ULL,
+	0x7500007575757500ULL, 0xdb0000dbdbdbdb00ULL, 0x8a00008a8a8a8a00ULL,
+	0x0300000303030300ULL, 0xe60000e6e6e6e600ULL, 0xda0000dadadada00ULL,
+	0x0900000909090900ULL, 0x3f00003f3f3f3f00ULL, 0xdd0000dddddddd00ULL,
+	0x9400009494949400ULL, 0x8700008787878700ULL, 0x5c00005c5c5c5c00ULL,
+	0x8300008383838300ULL, 0x0200000202020200ULL, 0xcd0000cdcdcdcd00ULL,
+	0x4a00004a4a4a4a00ULL, 0x9000009090909000ULL, 0x3300003333333300ULL,
+	0x7300007373737300ULL, 0x6700006767676700ULL, 0xf60000f6f6f6f600ULL,
+	0xf30000f3f3f3f300ULL, 0x9d00009d9d9d9d00ULL, 0x7f00007f7f7f7f00ULL,
+	0xbf0000bfbfbfbf00ULL, 0xe20000e2e2e2e200ULL, 0x5200005252525200ULL,
+	0x9b00009b9b9b9b00ULL, 0xd80000d8d8d8d800ULL, 0x2600002626262600ULL,
+	0xc80000c8c8c8c800ULL, 0x3700003737373700ULL, 0xc60000c6c6c6c600ULL,
+	0x3b00003b3b3b3b00ULL, 0x8100008181818100ULL, 0x9600009696969600ULL,
+	0x6f00006f6f6f6f00ULL, 0x4b00004b4b4b4b00ULL, 0x1300001313131300ULL,
+	0xbe0000bebebebe00ULL, 0x6300006363636300ULL, 0x2e00002e2e2e2e00ULL,
+	0xe90000e9e9e9e900ULL, 0x7900007979797900ULL, 0xa70000a7a7a7a700ULL,
+	0x8c00008c8c8c8c00ULL, 0x9f00009f9f9f9f00ULL, 0x6e00006e6e6e6e00ULL,
+	0xbc0000bcbcbcbc00ULL, 0x8e00008e8e8e8e00ULL, 0x2900002929292900ULL,
+	0xf50000f5f5f5f500ULL, 0xf90000f9f9f9f900ULL, 0xb60000b6b6b6b600ULL,
+	0x2f00002f2f2f2f00ULL, 0xfd0000fdfdfdfd00ULL, 0xb40000b4b4b4b400ULL,
+	0x5900005959595900ULL, 0x7800007878787800ULL, 0x9800009898989800ULL,
+	0x0600000606060600ULL, 0x6a00006a6a6a6a00ULL, 0xe70000e7e7e7e700ULL,
+	0x4600004646464600ULL, 0x7100007171717100ULL, 0xba0000babababa00ULL,
+	0xd40000d4d4d4d400ULL, 0x2500002525252500ULL, 0xab0000abababab00ULL,
+	0x4200004242424200ULL, 0x8800008888888800ULL, 0xa20000a2a2a2a200ULL,
+	0x8d00008d8d8d8d00ULL, 0xfa0000fafafafa00ULL, 0x7200007272727200ULL,
+	0x0700000707070700ULL, 0xb90000b9b9b9b900ULL, 0x5500005555555500ULL,
+	0xf80000f8f8f8f800ULL, 0xee0000eeeeeeee00ULL, 0xac0000acacacac00ULL,
+	0x0a00000a0a0a0a00ULL, 0x3600003636363600ULL, 0x4900004949494900ULL,
+	0x2a00002a2a2a2a00ULL, 0x6800006868686800ULL, 0x3c00003c3c3c3c00ULL,
+	0x3800003838383800ULL, 0xf10000f1f1f1f100ULL, 0xa40000a4a4a4a400ULL,
+	0x4000004040404000ULL, 0x2800002828282800ULL, 0xd30000d3d3d3d300ULL,
+	0x7b00007b7b7b7b00ULL, 0xbb0000bbbbbbbb00ULL, 0xc90000c9c9c9c900ULL,
+	0x4300004343434300ULL, 0xc10000c1c1c1c100ULL, 0x1500001515151500ULL,
+	0xe30000e3e3e3e300ULL, 0xad0000adadadad00ULL, 0xf40000f4f4f4f400ULL,
+	0x7700007777777700ULL, 0xc70000c7c7c7c700ULL, 0x8000008080808000ULL,
+	0x9e00009e9e9e9e00ULL,
 };
 
 const u64 camellia_sp22000222[256] = {
-	0xe0e0000000e0e0e0, 0x0505000000050505, 0x5858000000585858,
-	0xd9d9000000d9d9d9, 0x6767000000676767, 0x4e4e0000004e4e4e,
-	0x8181000000818181, 0xcbcb000000cbcbcb, 0xc9c9000000c9c9c9,
-	0x0b0b0000000b0b0b, 0xaeae000000aeaeae, 0x6a6a0000006a6a6a,
-	0xd5d5000000d5d5d5, 0x1818000000181818, 0x5d5d0000005d5d5d,
-	0x8282000000828282, 0x4646000000464646, 0xdfdf000000dfdfdf,
-	0xd6d6000000d6d6d6, 0x2727000000272727, 0x8a8a0000008a8a8a,
-	0x3232000000323232, 0x4b4b0000004b4b4b, 0x4242000000424242,
-	0xdbdb000000dbdbdb, 0x1c1c0000001c1c1c, 0x9e9e0000009e9e9e,
-	0x9c9c0000009c9c9c, 0x3a3a0000003a3a3a, 0xcaca000000cacaca,
-	0x2525000000252525, 0x7b7b0000007b7b7b, 0x0d0d0000000d0d0d,
-	0x7171000000717171, 0x5f5f0000005f5f5f, 0x1f1f0000001f1f1f,
-	0xf8f8000000f8f8f8, 0xd7d7000000d7d7d7, 0x3e3e0000003e3e3e,
-	0x9d9d0000009d9d9d, 0x7c7c0000007c7c7c, 0x6060000000606060,
-	0xb9b9000000b9b9b9, 0xbebe000000bebebe, 0xbcbc000000bcbcbc,
-	0x8b8b0000008b8b8b, 0x1616000000161616, 0x3434000000343434,
-	0x4d4d0000004d4d4d, 0xc3c3000000c3c3c3, 0x7272000000727272,
-	0x9595000000959595, 0xabab000000ababab, 0x8e8e0000008e8e8e,
-	0xbaba000000bababa, 0x7a7a0000007a7a7a, 0xb3b3000000b3b3b3,
-	0x0202000000020202, 0xb4b4000000b4b4b4, 0xadad000000adadad,
-	0xa2a2000000a2a2a2, 0xacac000000acacac, 0xd8d8000000d8d8d8,
-	0x9a9a0000009a9a9a, 0x1717000000171717, 0x1a1a0000001a1a1a,
-	0x3535000000353535, 0xcccc000000cccccc, 0xf7f7000000f7f7f7,
-	0x9999000000999999, 0x6161000000616161, 0x5a5a0000005a5a5a,
-	0xe8e8000000e8e8e8, 0x2424000000242424, 0x5656000000565656,
-	0x4040000000404040, 0xe1e1000000e1e1e1, 0x6363000000636363,
-	0x0909000000090909, 0x3333000000333333, 0xbfbf000000bfbfbf,
-	0x9898000000989898, 0x9797000000979797, 0x8585000000858585,
-	0x6868000000686868, 0xfcfc000000fcfcfc, 0xecec000000ececec,
-	0x0a0a0000000a0a0a, 0xdada000000dadada, 0x6f6f0000006f6f6f,
-	0x5353000000535353, 0x6262000000626262, 0xa3a3000000a3a3a3,
-	0x2e2e0000002e2e2e, 0x0808000000080808, 0xafaf000000afafaf,
-	0x2828000000282828, 0xb0b0000000b0b0b0, 0x7474000000747474,
-	0xc2c2000000c2c2c2, 0xbdbd000000bdbdbd, 0x3636000000363636,
-	0x2222000000222222, 0x3838000000383838, 0x6464000000646464,
-	0x1e1e0000001e1e1e, 0x3939000000393939, 0x2c2c0000002c2c2c,
-	0xa6a6000000a6a6a6, 0x3030000000303030, 0xe5e5000000e5e5e5,
-	0x4444000000444444, 0xfdfd000000fdfdfd, 0x8888000000888888,
-	0x9f9f0000009f9f9f, 0x6565000000656565, 0x8787000000878787,
-	0x6b6b0000006b6b6b, 0xf4f4000000f4f4f4, 0x2323000000232323,
-	0x4848000000484848, 0x1010000000101010, 0xd1d1000000d1d1d1,
-	0x5151000000515151, 0xc0c0000000c0c0c0, 0xf9f9000000f9f9f9,
-	0xd2d2000000d2d2d2, 0xa0a0000000a0a0a0, 0x5555000000555555,
-	0xa1a1000000a1a1a1, 0x4141000000414141, 0xfafa000000fafafa,
-	0x4343000000434343, 0x1313000000131313, 0xc4c4000000c4c4c4,
-	0x2f2f0000002f2f2f, 0xa8a8000000a8a8a8, 0xb6b6000000b6b6b6,
-	0x3c3c0000003c3c3c, 0x2b2b0000002b2b2b, 0xc1c1000000c1c1c1,
-	0xffff000000ffffff, 0xc8c8000000c8c8c8, 0xa5a5000000a5a5a5,
-	0x2020000000202020, 0x8989000000898989, 0x0000000000000000,
-	0x9090000000909090, 0x4747000000474747, 0xefef000000efefef,
-	0xeaea000000eaeaea, 0xb7b7000000b7b7b7, 0x1515000000151515,
-	0x0606000000060606, 0xcdcd000000cdcdcd, 0xb5b5000000b5b5b5,
-	0x1212000000121212, 0x7e7e0000007e7e7e, 0xbbbb000000bbbbbb,
-	0x2929000000292929, 0x0f0f0000000f0f0f, 0xb8b8000000b8b8b8,
-	0x0707000000070707, 0x0404000000040404, 0x9b9b0000009b9b9b,
-	0x9494000000949494, 0x2121000000212121, 0x6666000000666666,
-	0xe6e6000000e6e6e6, 0xcece000000cecece, 0xeded000000ededed,
-	0xe7e7000000e7e7e7, 0x3b3b0000003b3b3b, 0xfefe000000fefefe,
-	0x7f7f0000007f7f7f, 0xc5c5000000c5c5c5, 0xa4a4000000a4a4a4,
-	0x3737000000373737, 0xb1b1000000b1b1b1, 0x4c4c0000004c4c4c,
-	0x9191000000919191, 0x6e6e0000006e6e6e, 0x8d8d0000008d8d8d,
-	0x7676000000767676, 0x0303000000030303, 0x2d2d0000002d2d2d,
-	0xdede000000dedede, 0x9696000000969696, 0x2626000000262626,
-	0x7d7d0000007d7d7d, 0xc6c6000000c6c6c6, 0x5c5c0000005c5c5c,
-	0xd3d3000000d3d3d3, 0xf2f2000000f2f2f2, 0x4f4f0000004f4f4f,
-	0x1919000000191919, 0x3f3f0000003f3f3f, 0xdcdc000000dcdcdc,
-	0x7979000000797979, 0x1d1d0000001d1d1d, 0x5252000000525252,
-	0xebeb000000ebebeb, 0xf3f3000000f3f3f3, 0x6d6d0000006d6d6d,
-	0x5e5e0000005e5e5e, 0xfbfb000000fbfbfb, 0x6969000000696969,
-	0xb2b2000000b2b2b2, 0xf0f0000000f0f0f0, 0x3131000000313131,
-	0x0c0c0000000c0c0c, 0xd4d4000000d4d4d4, 0xcfcf000000cfcfcf,
-	0x8c8c0000008c8c8c, 0xe2e2000000e2e2e2, 0x7575000000757575,
-	0xa9a9000000a9a9a9, 0x4a4a0000004a4a4a, 0x5757000000575757,
-	0x8484000000848484, 0x1111000000111111, 0x4545000000454545,
-	0x1b1b0000001b1b1b, 0xf5f5000000f5f5f5, 0xe4e4000000e4e4e4,
-	0x0e0e0000000e0e0e, 0x7373000000737373, 0xaaaa000000aaaaaa,
-	0xf1f1000000f1f1f1, 0xdddd000000dddddd, 0x5959000000595959,
-	0x1414000000141414, 0x6c6c0000006c6c6c, 0x9292000000929292,
-	0x5454000000545454, 0xd0d0000000d0d0d0, 0x7878000000787878,
-	0x7070000000707070, 0xe3e3000000e3e3e3, 0x4949000000494949,
-	0x8080000000808080, 0x5050000000505050, 0xa7a7000000a7a7a7,
-	0xf6f6000000f6f6f6, 0x7777000000777777, 0x9393000000939393,
-	0x8686000000868686, 0x8383000000838383, 0x2a2a0000002a2a2a,
-	0xc7c7000000c7c7c7, 0x5b5b0000005b5b5b, 0xe9e9000000e9e9e9,
-	0xeeee000000eeeeee, 0x8f8f0000008f8f8f, 0x0101000000010101,
-	0x3d3d0000003d3d3d,
+	0xe0e0000000e0e0e0ULL, 0x0505000000050505ULL, 0x5858000000585858ULL,
+	0xd9d9000000d9d9d9ULL, 0x6767000000676767ULL, 0x4e4e0000004e4e4eULL,
+	0x8181000000818181ULL, 0xcbcb000000cbcbcbULL, 0xc9c9000000c9c9c9ULL,
+	0x0b0b0000000b0b0bULL, 0xaeae000000aeaeaeULL, 0x6a6a0000006a6a6aULL,
+	0xd5d5000000d5d5d5ULL, 0x1818000000181818ULL, 0x5d5d0000005d5d5dULL,
+	0x8282000000828282ULL, 0x4646000000464646ULL, 0xdfdf000000dfdfdfULL,
+	0xd6d6000000d6d6d6ULL, 0x2727000000272727ULL, 0x8a8a0000008a8a8aULL,
+	0x3232000000323232ULL, 0x4b4b0000004b4b4bULL, 0x4242000000424242ULL,
+	0xdbdb000000dbdbdbULL, 0x1c1c0000001c1c1cULL, 0x9e9e0000009e9e9eULL,
+	0x9c9c0000009c9c9cULL, 0x3a3a0000003a3a3aULL, 0xcaca000000cacacaULL,
+	0x2525000000252525ULL, 0x7b7b0000007b7b7bULL, 0x0d0d0000000d0d0dULL,
+	0x7171000000717171ULL, 0x5f5f0000005f5f5fULL, 0x1f1f0000001f1f1fULL,
+	0xf8f8000000f8f8f8ULL, 0xd7d7000000d7d7d7ULL, 0x3e3e0000003e3e3eULL,
+	0x9d9d0000009d9d9dULL, 0x7c7c0000007c7c7cULL, 0x6060000000606060ULL,
+	0xb9b9000000b9b9b9ULL, 0xbebe000000bebebeULL, 0xbcbc000000bcbcbcULL,
+	0x8b8b0000008b8b8bULL, 0x1616000000161616ULL, 0x3434000000343434ULL,
+	0x4d4d0000004d4d4dULL, 0xc3c3000000c3c3c3ULL, 0x7272000000727272ULL,
+	0x9595000000959595ULL, 0xabab000000abababULL, 0x8e8e0000008e8e8eULL,
+	0xbaba000000bababaULL, 0x7a7a0000007a7a7aULL, 0xb3b3000000b3b3b3ULL,
+	0x0202000000020202ULL, 0xb4b4000000b4b4b4ULL, 0xadad000000adadadULL,
+	0xa2a2000000a2a2a2ULL, 0xacac000000acacacULL, 0xd8d8000000d8d8d8ULL,
+	0x9a9a0000009a9a9aULL, 0x1717000000171717ULL, 0x1a1a0000001a1a1aULL,
+	0x3535000000353535ULL, 0xcccc000000ccccccULL, 0xf7f7000000f7f7f7ULL,
+	0x9999000000999999ULL, 0x6161000000616161ULL, 0x5a5a0000005a5a5aULL,
+	0xe8e8000000e8e8e8ULL, 0x2424000000242424ULL, 0x5656000000565656ULL,
+	0x4040000000404040ULL, 0xe1e1000000e1e1e1ULL, 0x6363000000636363ULL,
+	0x0909000000090909ULL, 0x3333000000333333ULL, 0xbfbf000000bfbfbfULL,
+	0x9898000000989898ULL, 0x9797000000979797ULL, 0x8585000000858585ULL,
+	0x6868000000686868ULL, 0xfcfc000000fcfcfcULL, 0xecec000000ecececULL,
+	0x0a0a0000000a0a0aULL, 0xdada000000dadadaULL, 0x6f6f0000006f6f6fULL,
+	0x5353000000535353ULL, 0x6262000000626262ULL, 0xa3a3000000a3a3a3ULL,
+	0x2e2e0000002e2e2eULL, 0x0808000000080808ULL, 0xafaf000000afafafULL,
+	0x2828000000282828ULL, 0xb0b0000000b0b0b0ULL, 0x7474000000747474ULL,
+	0xc2c2000000c2c2c2ULL, 0xbdbd000000bdbdbdULL, 0x3636000000363636ULL,
+	0x2222000000222222ULL, 0x3838000000383838ULL, 0x6464000000646464ULL,
+	0x1e1e0000001e1e1eULL, 0x3939000000393939ULL, 0x2c2c0000002c2c2cULL,
+	0xa6a6000000a6a6a6ULL, 0x3030000000303030ULL, 0xe5e5000000e5e5e5ULL,
+	0x4444000000444444ULL, 0xfdfd000000fdfdfdULL, 0x8888000000888888ULL,
+	0x9f9f0000009f9f9fULL, 0x6565000000656565ULL, 0x8787000000878787ULL,
+	0x6b6b0000006b6b6bULL, 0xf4f4000000f4f4f4ULL, 0x2323000000232323ULL,
+	0x4848000000484848ULL, 0x1010000000101010ULL, 0xd1d1000000d1d1d1ULL,
+	0x5151000000515151ULL, 0xc0c0000000c0c0c0ULL, 0xf9f9000000f9f9f9ULL,
+	0xd2d2000000d2d2d2ULL, 0xa0a0000000a0a0a0ULL, 0x5555000000555555ULL,
+	0xa1a1000000a1a1a1ULL, 0x4141000000414141ULL, 0xfafa000000fafafaULL,
+	0x4343000000434343ULL, 0x1313000000131313ULL, 0xc4c4000000c4c4c4ULL,
+	0x2f2f0000002f2f2fULL, 0xa8a8000000a8a8a8ULL, 0xb6b6000000b6b6b6ULL,
+	0x3c3c0000003c3c3cULL, 0x2b2b0000002b2b2bULL, 0xc1c1000000c1c1c1ULL,
+	0xffff000000ffffffULL, 0xc8c8000000c8c8c8ULL, 0xa5a5000000a5a5a5ULL,
+	0x2020000000202020ULL, 0x8989000000898989ULL, 0x0000000000000000ULL,
+	0x9090000000909090ULL, 0x4747000000474747ULL, 0xefef000000efefefULL,
+	0xeaea000000eaeaeaULL, 0xb7b7000000b7b7b7ULL, 0x1515000000151515ULL,
+	0x0606000000060606ULL, 0xcdcd000000cdcdcdULL, 0xb5b5000000b5b5b5ULL,
+	0x1212000000121212ULL, 0x7e7e0000007e7e7eULL, 0xbbbb000000bbbbbbULL,
+	0x2929000000292929ULL, 0x0f0f0000000f0f0fULL, 0xb8b8000000b8b8b8ULL,
+	0x0707000000070707ULL, 0x0404000000040404ULL, 0x9b9b0000009b9b9bULL,
+	0x9494000000949494ULL, 0x2121000000212121ULL, 0x6666000000666666ULL,
+	0xe6e6000000e6e6e6ULL, 0xcece000000cececeULL, 0xeded000000edededULL,
+	0xe7e7000000e7e7e7ULL, 0x3b3b0000003b3b3bULL, 0xfefe000000fefefeULL,
+	0x7f7f0000007f7f7fULL, 0xc5c5000000c5c5c5ULL, 0xa4a4000000a4a4a4ULL,
+	0x3737000000373737ULL, 0xb1b1000000b1b1b1ULL, 0x4c4c0000004c4c4cULL,
+	0x9191000000919191ULL, 0x6e6e0000006e6e6eULL, 0x8d8d0000008d8d8dULL,
+	0x7676000000767676ULL, 0x0303000000030303ULL, 0x2d2d0000002d2d2dULL,
+	0xdede000000dededeULL, 0x9696000000969696ULL, 0x2626000000262626ULL,
+	0x7d7d0000007d7d7dULL, 0xc6c6000000c6c6c6ULL, 0x5c5c0000005c5c5cULL,
+	0xd3d3000000d3d3d3ULL, 0xf2f2000000f2f2f2ULL, 0x4f4f0000004f4f4fULL,
+	0x1919000000191919ULL, 0x3f3f0000003f3f3fULL, 0xdcdc000000dcdcdcULL,
+	0x7979000000797979ULL, 0x1d1d0000001d1d1dULL, 0x5252000000525252ULL,
+	0xebeb000000ebebebULL, 0xf3f3000000f3f3f3ULL, 0x6d6d0000006d6d6dULL,
+	0x5e5e0000005e5e5eULL, 0xfbfb000000fbfbfbULL, 0x6969000000696969ULL,
+	0xb2b2000000b2b2b2ULL, 0xf0f0000000f0f0f0ULL, 0x3131000000313131ULL,
+	0x0c0c0000000c0c0cULL, 0xd4d4000000d4d4d4ULL, 0xcfcf000000cfcfcfULL,
+	0x8c8c0000008c8c8cULL, 0xe2e2000000e2e2e2ULL, 0x7575000000757575ULL,
+	0xa9a9000000a9a9a9ULL, 0x4a4a0000004a4a4aULL, 0x5757000000575757ULL,
+	0x8484000000848484ULL, 0x1111000000111111ULL, 0x4545000000454545ULL,
+	0x1b1b0000001b1b1bULL, 0xf5f5000000f5f5f5ULL, 0xe4e4000000e4e4e4ULL,
+	0x0e0e0000000e0e0eULL, 0x7373000000737373ULL, 0xaaaa000000aaaaaaULL,
+	0xf1f1000000f1f1f1ULL, 0xdddd000000ddddddULL, 0x5959000000595959ULL,
+	0x1414000000141414ULL, 0x6c6c0000006c6c6cULL, 0x9292000000929292ULL,
+	0x5454000000545454ULL, 0xd0d0000000d0d0d0ULL, 0x7878000000787878ULL,
+	0x7070000000707070ULL, 0xe3e3000000e3e3e3ULL, 0x4949000000494949ULL,
+	0x8080000000808080ULL, 0x5050000000505050ULL, 0xa7a7000000a7a7a7ULL,
+	0xf6f6000000f6f6f6ULL, 0x7777000000777777ULL, 0x9393000000939393ULL,
+	0x8686000000868686ULL, 0x8383000000838383ULL, 0x2a2a0000002a2a2aULL,
+	0xc7c7000000c7c7c7ULL, 0x5b5b0000005b5b5bULL, 0xe9e9000000e9e9e9ULL,
+	0xeeee000000eeeeeeULL, 0x8f8f0000008f8f8fULL, 0x0101000000010101ULL,
+	0x3d3d0000003d3d3dULL,
 };
 
 const u64 camellia_sp03303033[256] = {
-	0x0038380038003838, 0x0041410041004141, 0x0016160016001616,
-	0x0076760076007676, 0x00d9d900d900d9d9, 0x0093930093009393,
-	0x0060600060006060, 0x00f2f200f200f2f2, 0x0072720072007272,
-	0x00c2c200c200c2c2, 0x00abab00ab00abab, 0x009a9a009a009a9a,
-	0x0075750075007575, 0x0006060006000606, 0x0057570057005757,
-	0x00a0a000a000a0a0, 0x0091910091009191, 0x00f7f700f700f7f7,
-	0x00b5b500b500b5b5, 0x00c9c900c900c9c9, 0x00a2a200a200a2a2,
-	0x008c8c008c008c8c, 0x00d2d200d200d2d2, 0x0090900090009090,
-	0x00f6f600f600f6f6, 0x0007070007000707, 0x00a7a700a700a7a7,
-	0x0027270027002727, 0x008e8e008e008e8e, 0x00b2b200b200b2b2,
-	0x0049490049004949, 0x00dede00de00dede, 0x0043430043004343,
-	0x005c5c005c005c5c, 0x00d7d700d700d7d7, 0x00c7c700c700c7c7,
-	0x003e3e003e003e3e, 0x00f5f500f500f5f5, 0x008f8f008f008f8f,
-	0x0067670067006767, 0x001f1f001f001f1f, 0x0018180018001818,
-	0x006e6e006e006e6e, 0x00afaf00af00afaf, 0x002f2f002f002f2f,
-	0x00e2e200e200e2e2, 0x0085850085008585, 0x000d0d000d000d0d,
-	0x0053530053005353, 0x00f0f000f000f0f0, 0x009c9c009c009c9c,
-	0x0065650065006565, 0x00eaea00ea00eaea, 0x00a3a300a300a3a3,
-	0x00aeae00ae00aeae, 0x009e9e009e009e9e, 0x00ecec00ec00ecec,
-	0x0080800080008080, 0x002d2d002d002d2d, 0x006b6b006b006b6b,
-	0x00a8a800a800a8a8, 0x002b2b002b002b2b, 0x0036360036003636,
-	0x00a6a600a600a6a6, 0x00c5c500c500c5c5, 0x0086860086008686,
-	0x004d4d004d004d4d, 0x0033330033003333, 0x00fdfd00fd00fdfd,
-	0x0066660066006666, 0x0058580058005858, 0x0096960096009696,
-	0x003a3a003a003a3a, 0x0009090009000909, 0x0095950095009595,
-	0x0010100010001010, 0x0078780078007878, 0x00d8d800d800d8d8,
-	0x0042420042004242, 0x00cccc00cc00cccc, 0x00efef00ef00efef,
-	0x0026260026002626, 0x00e5e500e500e5e5, 0x0061610061006161,
-	0x001a1a001a001a1a, 0x003f3f003f003f3f, 0x003b3b003b003b3b,
-	0x0082820082008282, 0x00b6b600b600b6b6, 0x00dbdb00db00dbdb,
-	0x00d4d400d400d4d4, 0x0098980098009898, 0x00e8e800e800e8e8,
-	0x008b8b008b008b8b, 0x0002020002000202, 0x00ebeb00eb00ebeb,
-	0x000a0a000a000a0a, 0x002c2c002c002c2c, 0x001d1d001d001d1d,
-	0x00b0b000b000b0b0, 0x006f6f006f006f6f, 0x008d8d008d008d8d,
-	0x0088880088008888, 0x000e0e000e000e0e, 0x0019190019001919,
-	0x0087870087008787, 0x004e4e004e004e4e, 0x000b0b000b000b0b,
-	0x00a9a900a900a9a9, 0x000c0c000c000c0c, 0x0079790079007979,
-	0x0011110011001111, 0x007f7f007f007f7f, 0x0022220022002222,
-	0x00e7e700e700e7e7, 0x0059590059005959, 0x00e1e100e100e1e1,
-	0x00dada00da00dada, 0x003d3d003d003d3d, 0x00c8c800c800c8c8,
-	0x0012120012001212, 0x0004040004000404, 0x0074740074007474,
-	0x0054540054005454, 0x0030300030003030, 0x007e7e007e007e7e,
-	0x00b4b400b400b4b4, 0x0028280028002828, 0x0055550055005555,
-	0x0068680068006868, 0x0050500050005050, 0x00bebe00be00bebe,
-	0x00d0d000d000d0d0, 0x00c4c400c400c4c4, 0x0031310031003131,
-	0x00cbcb00cb00cbcb, 0x002a2a002a002a2a, 0x00adad00ad00adad,
-	0x000f0f000f000f0f, 0x00caca00ca00caca, 0x0070700070007070,
-	0x00ffff00ff00ffff, 0x0032320032003232, 0x0069690069006969,
-	0x0008080008000808, 0x0062620062006262, 0x0000000000000000,
-	0x0024240024002424, 0x00d1d100d100d1d1, 0x00fbfb00fb00fbfb,
-	0x00baba00ba00baba, 0x00eded00ed00eded, 0x0045450045004545,
-	0x0081810081008181, 0x0073730073007373, 0x006d6d006d006d6d,
-	0x0084840084008484, 0x009f9f009f009f9f, 0x00eeee00ee00eeee,
-	0x004a4a004a004a4a, 0x00c3c300c300c3c3, 0x002e2e002e002e2e,
-	0x00c1c100c100c1c1, 0x0001010001000101, 0x00e6e600e600e6e6,
-	0x0025250025002525, 0x0048480048004848, 0x0099990099009999,
-	0x00b9b900b900b9b9, 0x00b3b300b300b3b3, 0x007b7b007b007b7b,
-	0x00f9f900f900f9f9, 0x00cece00ce00cece, 0x00bfbf00bf00bfbf,
-	0x00dfdf00df00dfdf, 0x0071710071007171, 0x0029290029002929,
-	0x00cdcd00cd00cdcd, 0x006c6c006c006c6c, 0x0013130013001313,
-	0x0064640064006464, 0x009b9b009b009b9b, 0x0063630063006363,
-	0x009d9d009d009d9d, 0x00c0c000c000c0c0, 0x004b4b004b004b4b,
-	0x00b7b700b700b7b7, 0x00a5a500a500a5a5, 0x0089890089008989,
-	0x005f5f005f005f5f, 0x00b1b100b100b1b1, 0x0017170017001717,
-	0x00f4f400f400f4f4, 0x00bcbc00bc00bcbc, 0x00d3d300d300d3d3,
-	0x0046460046004646, 0x00cfcf00cf00cfcf, 0x0037370037003737,
-	0x005e5e005e005e5e, 0x0047470047004747, 0x0094940094009494,
-	0x00fafa00fa00fafa, 0x00fcfc00fc00fcfc, 0x005b5b005b005b5b,
-	0x0097970097009797, 0x00fefe00fe00fefe, 0x005a5a005a005a5a,
-	0x00acac00ac00acac, 0x003c3c003c003c3c, 0x004c4c004c004c4c,
-	0x0003030003000303, 0x0035350035003535, 0x00f3f300f300f3f3,
-	0x0023230023002323, 0x00b8b800b800b8b8, 0x005d5d005d005d5d,
-	0x006a6a006a006a6a, 0x0092920092009292, 0x00d5d500d500d5d5,
-	0x0021210021002121, 0x0044440044004444, 0x0051510051005151,
-	0x00c6c600c600c6c6, 0x007d7d007d007d7d, 0x0039390039003939,
-	0x0083830083008383, 0x00dcdc00dc00dcdc, 0x00aaaa00aa00aaaa,
-	0x007c7c007c007c7c, 0x0077770077007777, 0x0056560056005656,
-	0x0005050005000505, 0x001b1b001b001b1b, 0x00a4a400a400a4a4,
-	0x0015150015001515, 0x0034340034003434, 0x001e1e001e001e1e,
-	0x001c1c001c001c1c, 0x00f8f800f800f8f8, 0x0052520052005252,
-	0x0020200020002020, 0x0014140014001414, 0x00e9e900e900e9e9,
-	0x00bdbd00bd00bdbd, 0x00dddd00dd00dddd, 0x00e4e400e400e4e4,
-	0x00a1a100a100a1a1, 0x00e0e000e000e0e0, 0x008a8a008a008a8a,
-	0x00f1f100f100f1f1, 0x00d6d600d600d6d6, 0x007a7a007a007a7a,
-	0x00bbbb00bb00bbbb, 0x00e3e300e300e3e3, 0x0040400040004040,
-	0x004f4f004f004f4f,
+	0x0038380038003838ULL, 0x0041410041004141ULL, 0x0016160016001616ULL,
+	0x0076760076007676ULL, 0x00d9d900d900d9d9ULL, 0x0093930093009393ULL,
+	0x0060600060006060ULL, 0x00f2f200f200f2f2ULL, 0x0072720072007272ULL,
+	0x00c2c200c200c2c2ULL, 0x00abab00ab00ababULL, 0x009a9a009a009a9aULL,
+	0x0075750075007575ULL, 0x0006060006000606ULL, 0x0057570057005757ULL,
+	0x00a0a000a000a0a0ULL, 0x0091910091009191ULL, 0x00f7f700f700f7f7ULL,
+	0x00b5b500b500b5b5ULL, 0x00c9c900c900c9c9ULL, 0x00a2a200a200a2a2ULL,
+	0x008c8c008c008c8cULL, 0x00d2d200d200d2d2ULL, 0x0090900090009090ULL,
+	0x00f6f600f600f6f6ULL, 0x0007070007000707ULL, 0x00a7a700a700a7a7ULL,
+	0x0027270027002727ULL, 0x008e8e008e008e8eULL, 0x00b2b200b200b2b2ULL,
+	0x0049490049004949ULL, 0x00dede00de00dedeULL, 0x0043430043004343ULL,
+	0x005c5c005c005c5cULL, 0x00d7d700d700d7d7ULL, 0x00c7c700c700c7c7ULL,
+	0x003e3e003e003e3eULL, 0x00f5f500f500f5f5ULL, 0x008f8f008f008f8fULL,
+	0x0067670067006767ULL, 0x001f1f001f001f1fULL, 0x0018180018001818ULL,
+	0x006e6e006e006e6eULL, 0x00afaf00af00afafULL, 0x002f2f002f002f2fULL,
+	0x00e2e200e200e2e2ULL, 0x0085850085008585ULL, 0x000d0d000d000d0dULL,
+	0x0053530053005353ULL, 0x00f0f000f000f0f0ULL, 0x009c9c009c009c9cULL,
+	0x0065650065006565ULL, 0x00eaea00ea00eaeaULL, 0x00a3a300a300a3a3ULL,
+	0x00aeae00ae00aeaeULL, 0x009e9e009e009e9eULL, 0x00ecec00ec00ececULL,
+	0x0080800080008080ULL, 0x002d2d002d002d2dULL, 0x006b6b006b006b6bULL,
+	0x00a8a800a800a8a8ULL, 0x002b2b002b002b2bULL, 0x0036360036003636ULL,
+	0x00a6a600a600a6a6ULL, 0x00c5c500c500c5c5ULL, 0x0086860086008686ULL,
+	0x004d4d004d004d4dULL, 0x0033330033003333ULL, 0x00fdfd00fd00fdfdULL,
+	0x0066660066006666ULL, 0x0058580058005858ULL, 0x0096960096009696ULL,
+	0x003a3a003a003a3aULL, 0x0009090009000909ULL, 0x0095950095009595ULL,
+	0x0010100010001010ULL, 0x0078780078007878ULL, 0x00d8d800d800d8d8ULL,
+	0x0042420042004242ULL, 0x00cccc00cc00ccccULL, 0x00efef00ef00efefULL,
+	0x0026260026002626ULL, 0x00e5e500e500e5e5ULL, 0x0061610061006161ULL,
+	0x001a1a001a001a1aULL, 0x003f3f003f003f3fULL, 0x003b3b003b003b3bULL,
+	0x0082820082008282ULL, 0x00b6b600b600b6b6ULL, 0x00dbdb00db00dbdbULL,
+	0x00d4d400d400d4d4ULL, 0x0098980098009898ULL, 0x00e8e800e800e8e8ULL,
+	0x008b8b008b008b8bULL, 0x0002020002000202ULL, 0x00ebeb00eb00ebebULL,
+	0x000a0a000a000a0aULL, 0x002c2c002c002c2cULL, 0x001d1d001d001d1dULL,
+	0x00b0b000b000b0b0ULL, 0x006f6f006f006f6fULL, 0x008d8d008d008d8dULL,
+	0x0088880088008888ULL, 0x000e0e000e000e0eULL, 0x0019190019001919ULL,
+	0x0087870087008787ULL, 0x004e4e004e004e4eULL, 0x000b0b000b000b0bULL,
+	0x00a9a900a900a9a9ULL, 0x000c0c000c000c0cULL, 0x0079790079007979ULL,
+	0x0011110011001111ULL, 0x007f7f007f007f7fULL, 0x0022220022002222ULL,
+	0x00e7e700e700e7e7ULL, 0x0059590059005959ULL, 0x00e1e100e100e1e1ULL,
+	0x00dada00da00dadaULL, 0x003d3d003d003d3dULL, 0x00c8c800c800c8c8ULL,
+	0x0012120012001212ULL, 0x0004040004000404ULL, 0x0074740074007474ULL,
+	0x0054540054005454ULL, 0x0030300030003030ULL, 0x007e7e007e007e7eULL,
+	0x00b4b400b400b4b4ULL, 0x0028280028002828ULL, 0x0055550055005555ULL,
+	0x0068680068006868ULL, 0x0050500050005050ULL, 0x00bebe00be00bebeULL,
+	0x00d0d000d000d0d0ULL, 0x00c4c400c400c4c4ULL, 0x0031310031003131ULL,
+	0x00cbcb00cb00cbcbULL, 0x002a2a002a002a2aULL, 0x00adad00ad00adadULL,
+	0x000f0f000f000f0fULL, 0x00caca00ca00cacaULL, 0x0070700070007070ULL,
+	0x00ffff00ff00ffffULL, 0x0032320032003232ULL, 0x0069690069006969ULL,
+	0x0008080008000808ULL, 0x0062620062006262ULL, 0x0000000000000000ULL,
+	0x0024240024002424ULL, 0x00d1d100d100d1d1ULL, 0x00fbfb00fb00fbfbULL,
+	0x00baba00ba00babaULL, 0x00eded00ed00ededULL, 0x0045450045004545ULL,
+	0x0081810081008181ULL, 0x0073730073007373ULL, 0x006d6d006d006d6dULL,
+	0x0084840084008484ULL, 0x009f9f009f009f9fULL, 0x00eeee00ee00eeeeULL,
+	0x004a4a004a004a4aULL, 0x00c3c300c300c3c3ULL, 0x002e2e002e002e2eULL,
+	0x00c1c100c100c1c1ULL, 0x0001010001000101ULL, 0x00e6e600e600e6e6ULL,
+	0x0025250025002525ULL, 0x0048480048004848ULL, 0x0099990099009999ULL,
+	0x00b9b900b900b9b9ULL, 0x00b3b300b300b3b3ULL, 0x007b7b007b007b7bULL,
+	0x00f9f900f900f9f9ULL, 0x00cece00ce00ceceULL, 0x00bfbf00bf00bfbfULL,
+	0x00dfdf00df00dfdfULL, 0x0071710071007171ULL, 0x0029290029002929ULL,
+	0x00cdcd00cd00cdcdULL, 0x006c6c006c006c6cULL, 0x0013130013001313ULL,
+	0x0064640064006464ULL, 0x009b9b009b009b9bULL, 0x0063630063006363ULL,
+	0x009d9d009d009d9dULL, 0x00c0c000c000c0c0ULL, 0x004b4b004b004b4bULL,
+	0x00b7b700b700b7b7ULL, 0x00a5a500a500a5a5ULL, 0x0089890089008989ULL,
+	0x005f5f005f005f5fULL, 0x00b1b100b100b1b1ULL, 0x0017170017001717ULL,
+	0x00f4f400f400f4f4ULL, 0x00bcbc00bc00bcbcULL, 0x00d3d300d300d3d3ULL,
+	0x0046460046004646ULL, 0x00cfcf00cf00cfcfULL, 0x0037370037003737ULL,
+	0x005e5e005e005e5eULL, 0x0047470047004747ULL, 0x0094940094009494ULL,
+	0x00fafa00fa00fafaULL, 0x00fcfc00fc00fcfcULL, 0x005b5b005b005b5bULL,
+	0x0097970097009797ULL, 0x00fefe00fe00fefeULL, 0x005a5a005a005a5aULL,
+	0x00acac00ac00acacULL, 0x003c3c003c003c3cULL, 0x004c4c004c004c4cULL,
+	0x0003030003000303ULL, 0x0035350035003535ULL, 0x00f3f300f300f3f3ULL,
+	0x0023230023002323ULL, 0x00b8b800b800b8b8ULL, 0x005d5d005d005d5dULL,
+	0x006a6a006a006a6aULL, 0x0092920092009292ULL, 0x00d5d500d500d5d5ULL,
+	0x0021210021002121ULL, 0x0044440044004444ULL, 0x0051510051005151ULL,
+	0x00c6c600c600c6c6ULL, 0x007d7d007d007d7dULL, 0x0039390039003939ULL,
+	0x0083830083008383ULL, 0x00dcdc00dc00dcdcULL, 0x00aaaa00aa00aaaaULL,
+	0x007c7c007c007c7cULL, 0x0077770077007777ULL, 0x0056560056005656ULL,
+	0x0005050005000505ULL, 0x001b1b001b001b1bULL, 0x00a4a400a400a4a4ULL,
+	0x0015150015001515ULL, 0x0034340034003434ULL, 0x001e1e001e001e1eULL,
+	0x001c1c001c001c1cULL, 0x00f8f800f800f8f8ULL, 0x0052520052005252ULL,
+	0x0020200020002020ULL, 0x0014140014001414ULL, 0x00e9e900e900e9e9ULL,
+	0x00bdbd00bd00bdbdULL, 0x00dddd00dd00ddddULL, 0x00e4e400e400e4e4ULL,
+	0x00a1a100a100a1a1ULL, 0x00e0e000e000e0e0ULL, 0x008a8a008a008a8aULL,
+	0x00f1f100f100f1f1ULL, 0x00d6d600d600d6d6ULL, 0x007a7a007a007a7aULL,
+	0x00bbbb00bb00bbbbULL, 0x00e3e300e300e3e3ULL, 0x0040400040004040ULL,
+	0x004f4f004f004f4fULL,
 };
 
 const u64 camellia_sp00444404[256] = {
-	0x0000707070700070, 0x00002c2c2c2c002c, 0x0000b3b3b3b300b3,
-	0x0000c0c0c0c000c0, 0x0000e4e4e4e400e4, 0x0000575757570057,
-	0x0000eaeaeaea00ea, 0x0000aeaeaeae00ae, 0x0000232323230023,
-	0x00006b6b6b6b006b, 0x0000454545450045, 0x0000a5a5a5a500a5,
-	0x0000edededed00ed, 0x00004f4f4f4f004f, 0x00001d1d1d1d001d,
-	0x0000929292920092, 0x0000868686860086, 0x0000afafafaf00af,
-	0x00007c7c7c7c007c, 0x00001f1f1f1f001f, 0x00003e3e3e3e003e,
-	0x0000dcdcdcdc00dc, 0x00005e5e5e5e005e, 0x00000b0b0b0b000b,
-	0x0000a6a6a6a600a6, 0x0000393939390039, 0x0000d5d5d5d500d5,
-	0x00005d5d5d5d005d, 0x0000d9d9d9d900d9, 0x00005a5a5a5a005a,
-	0x0000515151510051, 0x00006c6c6c6c006c, 0x00008b8b8b8b008b,
-	0x00009a9a9a9a009a, 0x0000fbfbfbfb00fb, 0x0000b0b0b0b000b0,
-	0x0000747474740074, 0x00002b2b2b2b002b, 0x0000f0f0f0f000f0,
-	0x0000848484840084, 0x0000dfdfdfdf00df, 0x0000cbcbcbcb00cb,
-	0x0000343434340034, 0x0000767676760076, 0x00006d6d6d6d006d,
-	0x0000a9a9a9a900a9, 0x0000d1d1d1d100d1, 0x0000040404040004,
-	0x0000141414140014, 0x00003a3a3a3a003a, 0x0000dededede00de,
-	0x0000111111110011, 0x0000323232320032, 0x00009c9c9c9c009c,
-	0x0000535353530053, 0x0000f2f2f2f200f2, 0x0000fefefefe00fe,
-	0x0000cfcfcfcf00cf, 0x0000c3c3c3c300c3, 0x00007a7a7a7a007a,
-	0x0000242424240024, 0x0000e8e8e8e800e8, 0x0000606060600060,
-	0x0000696969690069, 0x0000aaaaaaaa00aa, 0x0000a0a0a0a000a0,
-	0x0000a1a1a1a100a1, 0x0000626262620062, 0x0000545454540054,
-	0x00001e1e1e1e001e, 0x0000e0e0e0e000e0, 0x0000646464640064,
-	0x0000101010100010, 0x0000000000000000, 0x0000a3a3a3a300a3,
-	0x0000757575750075, 0x00008a8a8a8a008a, 0x0000e6e6e6e600e6,
-	0x0000090909090009, 0x0000dddddddd00dd, 0x0000878787870087,
-	0x0000838383830083, 0x0000cdcdcdcd00cd, 0x0000909090900090,
-	0x0000737373730073, 0x0000f6f6f6f600f6, 0x00009d9d9d9d009d,
-	0x0000bfbfbfbf00bf, 0x0000525252520052, 0x0000d8d8d8d800d8,
-	0x0000c8c8c8c800c8, 0x0000c6c6c6c600c6, 0x0000818181810081,
-	0x00006f6f6f6f006f, 0x0000131313130013, 0x0000636363630063,
-	0x0000e9e9e9e900e9, 0x0000a7a7a7a700a7, 0x00009f9f9f9f009f,
-	0x0000bcbcbcbc00bc, 0x0000292929290029, 0x0000f9f9f9f900f9,
-	0x00002f2f2f2f002f, 0x0000b4b4b4b400b4, 0x0000787878780078,
-	0x0000060606060006, 0x0000e7e7e7e700e7, 0x0000717171710071,
-	0x0000d4d4d4d400d4, 0x0000abababab00ab, 0x0000888888880088,
-	0x00008d8d8d8d008d, 0x0000727272720072, 0x0000b9b9b9b900b9,
-	0x0000f8f8f8f800f8, 0x0000acacacac00ac, 0x0000363636360036,
-	0x00002a2a2a2a002a, 0x00003c3c3c3c003c, 0x0000f1f1f1f100f1,
-	0x0000404040400040, 0x0000d3d3d3d300d3, 0x0000bbbbbbbb00bb,
-	0x0000434343430043, 0x0000151515150015, 0x0000adadadad00ad,
-	0x0000777777770077, 0x0000808080800080, 0x0000828282820082,
-	0x0000ecececec00ec, 0x0000272727270027, 0x0000e5e5e5e500e5,
-	0x0000858585850085, 0x0000353535350035, 0x00000c0c0c0c000c,
-	0x0000414141410041, 0x0000efefefef00ef, 0x0000939393930093,
-	0x0000191919190019, 0x0000212121210021, 0x00000e0e0e0e000e,
-	0x00004e4e4e4e004e, 0x0000656565650065, 0x0000bdbdbdbd00bd,
-	0x0000b8b8b8b800b8, 0x00008f8f8f8f008f, 0x0000ebebebeb00eb,
-	0x0000cececece00ce, 0x0000303030300030, 0x00005f5f5f5f005f,
-	0x0000c5c5c5c500c5, 0x00001a1a1a1a001a, 0x0000e1e1e1e100e1,
-	0x0000cacacaca00ca, 0x0000474747470047, 0x00003d3d3d3d003d,
-	0x0000010101010001, 0x0000d6d6d6d600d6, 0x0000565656560056,
-	0x00004d4d4d4d004d, 0x00000d0d0d0d000d, 0x0000666666660066,
-	0x0000cccccccc00cc, 0x00002d2d2d2d002d, 0x0000121212120012,
-	0x0000202020200020, 0x0000b1b1b1b100b1, 0x0000999999990099,
-	0x00004c4c4c4c004c, 0x0000c2c2c2c200c2, 0x00007e7e7e7e007e,
-	0x0000050505050005, 0x0000b7b7b7b700b7, 0x0000313131310031,
-	0x0000171717170017, 0x0000d7d7d7d700d7, 0x0000585858580058,
-	0x0000616161610061, 0x00001b1b1b1b001b, 0x00001c1c1c1c001c,
-	0x00000f0f0f0f000f, 0x0000161616160016, 0x0000181818180018,
-	0x0000222222220022, 0x0000444444440044, 0x0000b2b2b2b200b2,
-	0x0000b5b5b5b500b5, 0x0000919191910091, 0x0000080808080008,
-	0x0000a8a8a8a800a8, 0x0000fcfcfcfc00fc, 0x0000505050500050,
-	0x0000d0d0d0d000d0, 0x00007d7d7d7d007d, 0x0000898989890089,
-	0x0000979797970097, 0x00005b5b5b5b005b, 0x0000959595950095,
-	0x0000ffffffff00ff, 0x0000d2d2d2d200d2, 0x0000c4c4c4c400c4,
-	0x0000484848480048, 0x0000f7f7f7f700f7, 0x0000dbdbdbdb00db,
-	0x0000030303030003, 0x0000dadadada00da, 0x00003f3f3f3f003f,
-	0x0000949494940094, 0x00005c5c5c5c005c, 0x0000020202020002,
-	0x00004a4a4a4a004a, 0x0000333333330033, 0x0000676767670067,
-	0x0000f3f3f3f300f3, 0x00007f7f7f7f007f, 0x0000e2e2e2e200e2,
-	0x00009b9b9b9b009b, 0x0000262626260026, 0x0000373737370037,
-	0x00003b3b3b3b003b, 0x0000969696960096, 0x00004b4b4b4b004b,
-	0x0000bebebebe00be, 0x00002e2e2e2e002e, 0x0000797979790079,
-	0x00008c8c8c8c008c, 0x00006e6e6e6e006e, 0x00008e8e8e8e008e,
-	0x0000f5f5f5f500f5, 0x0000b6b6b6b600b6, 0x0000fdfdfdfd00fd,
-	0x0000595959590059, 0x0000989898980098, 0x00006a6a6a6a006a,
-	0x0000464646460046, 0x0000babababa00ba, 0x0000252525250025,
-	0x0000424242420042, 0x0000a2a2a2a200a2, 0x0000fafafafa00fa,
-	0x0000070707070007, 0x0000555555550055, 0x0000eeeeeeee00ee,
-	0x00000a0a0a0a000a, 0x0000494949490049, 0x0000686868680068,
-	0x0000383838380038, 0x0000a4a4a4a400a4, 0x0000282828280028,
-	0x00007b7b7b7b007b, 0x0000c9c9c9c900c9, 0x0000c1c1c1c100c1,
-	0x0000e3e3e3e300e3, 0x0000f4f4f4f400f4, 0x0000c7c7c7c700c7,
-	0x00009e9e9e9e009e,
+	0x0000707070700070ULL, 0x00002c2c2c2c002cULL, 0x0000b3b3b3b300b3ULL,
+	0x0000c0c0c0c000c0ULL, 0x0000e4e4e4e400e4ULL, 0x0000575757570057ULL,
+	0x0000eaeaeaea00eaULL, 0x0000aeaeaeae00aeULL, 0x0000232323230023ULL,
+	0x00006b6b6b6b006bULL, 0x0000454545450045ULL, 0x0000a5a5a5a500a5ULL,
+	0x0000edededed00edULL, 0x00004f4f4f4f004fULL, 0x00001d1d1d1d001dULL,
+	0x0000929292920092ULL, 0x0000868686860086ULL, 0x0000afafafaf00afULL,
+	0x00007c7c7c7c007cULL, 0x00001f1f1f1f001fULL, 0x00003e3e3e3e003eULL,
+	0x0000dcdcdcdc00dcULL, 0x00005e5e5e5e005eULL, 0x00000b0b0b0b000bULL,
+	0x0000a6a6a6a600a6ULL, 0x0000393939390039ULL, 0x0000d5d5d5d500d5ULL,
+	0x00005d5d5d5d005dULL, 0x0000d9d9d9d900d9ULL, 0x00005a5a5a5a005aULL,
+	0x0000515151510051ULL, 0x00006c6c6c6c006cULL, 0x00008b8b8b8b008bULL,
+	0x00009a9a9a9a009aULL, 0x0000fbfbfbfb00fbULL, 0x0000b0b0b0b000b0ULL,
+	0x0000747474740074ULL, 0x00002b2b2b2b002bULL, 0x0000f0f0f0f000f0ULL,
+	0x0000848484840084ULL, 0x0000dfdfdfdf00dfULL, 0x0000cbcbcbcb00cbULL,
+	0x0000343434340034ULL, 0x0000767676760076ULL, 0x00006d6d6d6d006dULL,
+	0x0000a9a9a9a900a9ULL, 0x0000d1d1d1d100d1ULL, 0x0000040404040004ULL,
+	0x0000141414140014ULL, 0x00003a3a3a3a003aULL, 0x0000dededede00deULL,
+	0x0000111111110011ULL, 0x0000323232320032ULL, 0x00009c9c9c9c009cULL,
+	0x0000535353530053ULL, 0x0000f2f2f2f200f2ULL, 0x0000fefefefe00feULL,
+	0x0000cfcfcfcf00cfULL, 0x0000c3c3c3c300c3ULL, 0x00007a7a7a7a007aULL,
+	0x0000242424240024ULL, 0x0000e8e8e8e800e8ULL, 0x0000606060600060ULL,
+	0x0000696969690069ULL, 0x0000aaaaaaaa00aaULL, 0x0000a0a0a0a000a0ULL,
+	0x0000a1a1a1a100a1ULL, 0x0000626262620062ULL, 0x0000545454540054ULL,
+	0x00001e1e1e1e001eULL, 0x0000e0e0e0e000e0ULL, 0x0000646464640064ULL,
+	0x0000101010100010ULL, 0x0000000000000000ULL, 0x0000a3a3a3a300a3ULL,
+	0x0000757575750075ULL, 0x00008a8a8a8a008aULL, 0x0000e6e6e6e600e6ULL,
+	0x0000090909090009ULL, 0x0000dddddddd00ddULL, 0x0000878787870087ULL,
+	0x0000838383830083ULL, 0x0000cdcdcdcd00cdULL, 0x0000909090900090ULL,
+	0x0000737373730073ULL, 0x0000f6f6f6f600f6ULL, 0x00009d9d9d9d009dULL,
+	0x0000bfbfbfbf00bfULL, 0x0000525252520052ULL, 0x0000d8d8d8d800d8ULL,
+	0x0000c8c8c8c800c8ULL, 0x0000c6c6c6c600c6ULL, 0x0000818181810081ULL,
+	0x00006f6f6f6f006fULL, 0x0000131313130013ULL, 0x0000636363630063ULL,
+	0x0000e9e9e9e900e9ULL, 0x0000a7a7a7a700a7ULL, 0x00009f9f9f9f009fULL,
+	0x0000bcbcbcbc00bcULL, 0x0000292929290029ULL, 0x0000f9f9f9f900f9ULL,
+	0x00002f2f2f2f002fULL, 0x0000b4b4b4b400b4ULL, 0x0000787878780078ULL,
+	0x0000060606060006ULL, 0x0000e7e7e7e700e7ULL, 0x0000717171710071ULL,
+	0x0000d4d4d4d400d4ULL, 0x0000abababab00abULL, 0x0000888888880088ULL,
+	0x00008d8d8d8d008dULL, 0x0000727272720072ULL, 0x0000b9b9b9b900b9ULL,
+	0x0000f8f8f8f800f8ULL, 0x0000acacacac00acULL, 0x0000363636360036ULL,
+	0x00002a2a2a2a002aULL, 0x00003c3c3c3c003cULL, 0x0000f1f1f1f100f1ULL,
+	0x0000404040400040ULL, 0x0000d3d3d3d300d3ULL, 0x0000bbbbbbbb00bbULL,
+	0x0000434343430043ULL, 0x0000151515150015ULL, 0x0000adadadad00adULL,
+	0x0000777777770077ULL, 0x0000808080800080ULL, 0x0000828282820082ULL,
+	0x0000ecececec00ecULL, 0x0000272727270027ULL, 0x0000e5e5e5e500e5ULL,
+	0x0000858585850085ULL, 0x0000353535350035ULL, 0x00000c0c0c0c000cULL,
+	0x0000414141410041ULL, 0x0000efefefef00efULL, 0x0000939393930093ULL,
+	0x0000191919190019ULL, 0x0000212121210021ULL, 0x00000e0e0e0e000eULL,
+	0x00004e4e4e4e004eULL, 0x0000656565650065ULL, 0x0000bdbdbdbd00bdULL,
+	0x0000b8b8b8b800b8ULL, 0x00008f8f8f8f008fULL, 0x0000ebebebeb00ebULL,
+	0x0000cececece00ceULL, 0x0000303030300030ULL, 0x00005f5f5f5f005fULL,
+	0x0000c5c5c5c500c5ULL, 0x00001a1a1a1a001aULL, 0x0000e1e1e1e100e1ULL,
+	0x0000cacacaca00caULL, 0x0000474747470047ULL, 0x00003d3d3d3d003dULL,
+	0x0000010101010001ULL, 0x0000d6d6d6d600d6ULL, 0x0000565656560056ULL,
+	0x00004d4d4d4d004dULL, 0x00000d0d0d0d000dULL, 0x0000666666660066ULL,
+	0x0000cccccccc00ccULL, 0x00002d2d2d2d002dULL, 0x0000121212120012ULL,
+	0x0000202020200020ULL, 0x0000b1b1b1b100b1ULL, 0x0000999999990099ULL,
+	0x00004c4c4c4c004cULL, 0x0000c2c2c2c200c2ULL, 0x00007e7e7e7e007eULL,
+	0x0000050505050005ULL, 0x0000b7b7b7b700b7ULL, 0x0000313131310031ULL,
+	0x0000171717170017ULL, 0x0000d7d7d7d700d7ULL, 0x0000585858580058ULL,
+	0x0000616161610061ULL, 0x00001b1b1b1b001bULL, 0x00001c1c1c1c001cULL,
+	0x00000f0f0f0f000fULL, 0x0000161616160016ULL, 0x0000181818180018ULL,
+	0x0000222222220022ULL, 0x0000444444440044ULL, 0x0000b2b2b2b200b2ULL,
+	0x0000b5b5b5b500b5ULL, 0x0000919191910091ULL, 0x0000080808080008ULL,
+	0x0000a8a8a8a800a8ULL, 0x0000fcfcfcfc00fcULL, 0x0000505050500050ULL,
+	0x0000d0d0d0d000d0ULL, 0x00007d7d7d7d007dULL, 0x0000898989890089ULL,
+	0x0000979797970097ULL, 0x00005b5b5b5b005bULL, 0x0000959595950095ULL,
+	0x0000ffffffff00ffULL, 0x0000d2d2d2d200d2ULL, 0x0000c4c4c4c400c4ULL,
+	0x0000484848480048ULL, 0x0000f7f7f7f700f7ULL, 0x0000dbdbdbdb00dbULL,
+	0x0000030303030003ULL, 0x0000dadadada00daULL, 0x00003f3f3f3f003fULL,
+	0x0000949494940094ULL, 0x00005c5c5c5c005cULL, 0x0000020202020002ULL,
+	0x00004a4a4a4a004aULL, 0x0000333333330033ULL, 0x0000676767670067ULL,
+	0x0000f3f3f3f300f3ULL, 0x00007f7f7f7f007fULL, 0x0000e2e2e2e200e2ULL,
+	0x00009b9b9b9b009bULL, 0x0000262626260026ULL, 0x0000373737370037ULL,
+	0x00003b3b3b3b003bULL, 0x0000969696960096ULL, 0x00004b4b4b4b004bULL,
+	0x0000bebebebe00beULL, 0x00002e2e2e2e002eULL, 0x0000797979790079ULL,
+	0x00008c8c8c8c008cULL, 0x00006e6e6e6e006eULL, 0x00008e8e8e8e008eULL,
+	0x0000f5f5f5f500f5ULL, 0x0000b6b6b6b600b6ULL, 0x0000fdfdfdfd00fdULL,
+	0x0000595959590059ULL, 0x0000989898980098ULL, 0x00006a6a6a6a006aULL,
+	0x0000464646460046ULL, 0x0000babababa00baULL, 0x0000252525250025ULL,
+	0x0000424242420042ULL, 0x0000a2a2a2a200a2ULL, 0x0000fafafafa00faULL,
+	0x0000070707070007ULL, 0x0000555555550055ULL, 0x0000eeeeeeee00eeULL,
+	0x00000a0a0a0a000aULL, 0x0000494949490049ULL, 0x0000686868680068ULL,
+	0x0000383838380038ULL, 0x0000a4a4a4a400a4ULL, 0x0000282828280028ULL,
+	0x00007b7b7b7b007bULL, 0x0000c9c9c9c900c9ULL, 0x0000c1c1c1c100c1ULL,
+	0x0000e3e3e3e300e3ULL, 0x0000f4f4f4f400f4ULL, 0x0000c7c7c7c700c7ULL,
+	0x00009e9e9e9e009eULL,
 };
 
 const u64 camellia_sp02220222[256] = {
-	0x00e0e0e000e0e0e0, 0x0005050500050505, 0x0058585800585858,
-	0x00d9d9d900d9d9d9, 0x0067676700676767, 0x004e4e4e004e4e4e,
-	0x0081818100818181, 0x00cbcbcb00cbcbcb, 0x00c9c9c900c9c9c9,
-	0x000b0b0b000b0b0b, 0x00aeaeae00aeaeae, 0x006a6a6a006a6a6a,
-	0x00d5d5d500d5d5d5, 0x0018181800181818, 0x005d5d5d005d5d5d,
-	0x0082828200828282, 0x0046464600464646, 0x00dfdfdf00dfdfdf,
-	0x00d6d6d600d6d6d6, 0x0027272700272727, 0x008a8a8a008a8a8a,
-	0x0032323200323232, 0x004b4b4b004b4b4b, 0x0042424200424242,
-	0x00dbdbdb00dbdbdb, 0x001c1c1c001c1c1c, 0x009e9e9e009e9e9e,
-	0x009c9c9c009c9c9c, 0x003a3a3a003a3a3a, 0x00cacaca00cacaca,
-	0x0025252500252525, 0x007b7b7b007b7b7b, 0x000d0d0d000d0d0d,
-	0x0071717100717171, 0x005f5f5f005f5f5f, 0x001f1f1f001f1f1f,
-	0x00f8f8f800f8f8f8, 0x00d7d7d700d7d7d7, 0x003e3e3e003e3e3e,
-	0x009d9d9d009d9d9d, 0x007c7c7c007c7c7c, 0x0060606000606060,
-	0x00b9b9b900b9b9b9, 0x00bebebe00bebebe, 0x00bcbcbc00bcbcbc,
-	0x008b8b8b008b8b8b, 0x0016161600161616, 0x0034343400343434,
-	0x004d4d4d004d4d4d, 0x00c3c3c300c3c3c3, 0x0072727200727272,
-	0x0095959500959595, 0x00ababab00ababab, 0x008e8e8e008e8e8e,
-	0x00bababa00bababa, 0x007a7a7a007a7a7a, 0x00b3b3b300b3b3b3,
-	0x0002020200020202, 0x00b4b4b400b4b4b4, 0x00adadad00adadad,
-	0x00a2a2a200a2a2a2, 0x00acacac00acacac, 0x00d8d8d800d8d8d8,
-	0x009a9a9a009a9a9a, 0x0017171700171717, 0x001a1a1a001a1a1a,
-	0x0035353500353535, 0x00cccccc00cccccc, 0x00f7f7f700f7f7f7,
-	0x0099999900999999, 0x0061616100616161, 0x005a5a5a005a5a5a,
-	0x00e8e8e800e8e8e8, 0x0024242400242424, 0x0056565600565656,
-	0x0040404000404040, 0x00e1e1e100e1e1e1, 0x0063636300636363,
-	0x0009090900090909, 0x0033333300333333, 0x00bfbfbf00bfbfbf,
-	0x0098989800989898, 0x0097979700979797, 0x0085858500858585,
-	0x0068686800686868, 0x00fcfcfc00fcfcfc, 0x00ececec00ececec,
-	0x000a0a0a000a0a0a, 0x00dadada00dadada, 0x006f6f6f006f6f6f,
-	0x0053535300535353, 0x0062626200626262, 0x00a3a3a300a3a3a3,
-	0x002e2e2e002e2e2e, 0x0008080800080808, 0x00afafaf00afafaf,
-	0x0028282800282828, 0x00b0b0b000b0b0b0, 0x0074747400747474,
-	0x00c2c2c200c2c2c2, 0x00bdbdbd00bdbdbd, 0x0036363600363636,
-	0x0022222200222222, 0x0038383800383838, 0x0064646400646464,
-	0x001e1e1e001e1e1e, 0x0039393900393939, 0x002c2c2c002c2c2c,
-	0x00a6a6a600a6a6a6, 0x0030303000303030, 0x00e5e5e500e5e5e5,
-	0x0044444400444444, 0x00fdfdfd00fdfdfd, 0x0088888800888888,
-	0x009f9f9f009f9f9f, 0x0065656500656565, 0x0087878700878787,
-	0x006b6b6b006b6b6b, 0x00f4f4f400f4f4f4, 0x0023232300232323,
-	0x0048484800484848, 0x0010101000101010, 0x00d1d1d100d1d1d1,
-	0x0051515100515151, 0x00c0c0c000c0c0c0, 0x00f9f9f900f9f9f9,
-	0x00d2d2d200d2d2d2, 0x00a0a0a000a0a0a0, 0x0055555500555555,
-	0x00a1a1a100a1a1a1, 0x0041414100414141, 0x00fafafa00fafafa,
-	0x0043434300434343, 0x0013131300131313, 0x00c4c4c400c4c4c4,
-	0x002f2f2f002f2f2f, 0x00a8a8a800a8a8a8, 0x00b6b6b600b6b6b6,
-	0x003c3c3c003c3c3c, 0x002b2b2b002b2b2b, 0x00c1c1c100c1c1c1,
-	0x00ffffff00ffffff, 0x00c8c8c800c8c8c8, 0x00a5a5a500a5a5a5,
-	0x0020202000202020, 0x0089898900898989, 0x0000000000000000,
-	0x0090909000909090, 0x0047474700474747, 0x00efefef00efefef,
-	0x00eaeaea00eaeaea, 0x00b7b7b700b7b7b7, 0x0015151500151515,
-	0x0006060600060606, 0x00cdcdcd00cdcdcd, 0x00b5b5b500b5b5b5,
-	0x0012121200121212, 0x007e7e7e007e7e7e, 0x00bbbbbb00bbbbbb,
-	0x0029292900292929, 0x000f0f0f000f0f0f, 0x00b8b8b800b8b8b8,
-	0x0007070700070707, 0x0004040400040404, 0x009b9b9b009b9b9b,
-	0x0094949400949494, 0x0021212100212121, 0x0066666600666666,
-	0x00e6e6e600e6e6e6, 0x00cecece00cecece, 0x00ededed00ededed,
-	0x00e7e7e700e7e7e7, 0x003b3b3b003b3b3b, 0x00fefefe00fefefe,
-	0x007f7f7f007f7f7f, 0x00c5c5c500c5c5c5, 0x00a4a4a400a4a4a4,
-	0x0037373700373737, 0x00b1b1b100b1b1b1, 0x004c4c4c004c4c4c,
-	0x0091919100919191, 0x006e6e6e006e6e6e, 0x008d8d8d008d8d8d,
-	0x0076767600767676, 0x0003030300030303, 0x002d2d2d002d2d2d,
-	0x00dedede00dedede, 0x0096969600969696, 0x0026262600262626,
-	0x007d7d7d007d7d7d, 0x00c6c6c600c6c6c6, 0x005c5c5c005c5c5c,
-	0x00d3d3d300d3d3d3, 0x00f2f2f200f2f2f2, 0x004f4f4f004f4f4f,
-	0x0019191900191919, 0x003f3f3f003f3f3f, 0x00dcdcdc00dcdcdc,
-	0x0079797900797979, 0x001d1d1d001d1d1d, 0x0052525200525252,
-	0x00ebebeb00ebebeb, 0x00f3f3f300f3f3f3, 0x006d6d6d006d6d6d,
-	0x005e5e5e005e5e5e, 0x00fbfbfb00fbfbfb, 0x0069696900696969,
-	0x00b2b2b200b2b2b2, 0x00f0f0f000f0f0f0, 0x0031313100313131,
-	0x000c0c0c000c0c0c, 0x00d4d4d400d4d4d4, 0x00cfcfcf00cfcfcf,
-	0x008c8c8c008c8c8c, 0x00e2e2e200e2e2e2, 0x0075757500757575,
-	0x00a9a9a900a9a9a9, 0x004a4a4a004a4a4a, 0x0057575700575757,
-	0x0084848400848484, 0x0011111100111111, 0x0045454500454545,
-	0x001b1b1b001b1b1b, 0x00f5f5f500f5f5f5, 0x00e4e4e400e4e4e4,
-	0x000e0e0e000e0e0e, 0x0073737300737373, 0x00aaaaaa00aaaaaa,
-	0x00f1f1f100f1f1f1, 0x00dddddd00dddddd, 0x0059595900595959,
-	0x0014141400141414, 0x006c6c6c006c6c6c, 0x0092929200929292,
-	0x0054545400545454, 0x00d0d0d000d0d0d0, 0x0078787800787878,
-	0x0070707000707070, 0x00e3e3e300e3e3e3, 0x0049494900494949,
-	0x0080808000808080, 0x0050505000505050, 0x00a7a7a700a7a7a7,
-	0x00f6f6f600f6f6f6, 0x0077777700777777, 0x0093939300939393,
-	0x0086868600868686, 0x0083838300838383, 0x002a2a2a002a2a2a,
-	0x00c7c7c700c7c7c7, 0x005b5b5b005b5b5b, 0x00e9e9e900e9e9e9,
-	0x00eeeeee00eeeeee, 0x008f8f8f008f8f8f, 0x0001010100010101,
-	0x003d3d3d003d3d3d,
+	0x00e0e0e000e0e0e0ULL, 0x0005050500050505ULL, 0x0058585800585858ULL,
+	0x00d9d9d900d9d9d9ULL, 0x0067676700676767ULL, 0x004e4e4e004e4e4eULL,
+	0x0081818100818181ULL, 0x00cbcbcb00cbcbcbULL, 0x00c9c9c900c9c9c9ULL,
+	0x000b0b0b000b0b0bULL, 0x00aeaeae00aeaeaeULL, 0x006a6a6a006a6a6aULL,
+	0x00d5d5d500d5d5d5ULL, 0x0018181800181818ULL, 0x005d5d5d005d5d5dULL,
+	0x0082828200828282ULL, 0x0046464600464646ULL, 0x00dfdfdf00dfdfdfULL,
+	0x00d6d6d600d6d6d6ULL, 0x0027272700272727ULL, 0x008a8a8a008a8a8aULL,
+	0x0032323200323232ULL, 0x004b4b4b004b4b4bULL, 0x0042424200424242ULL,
+	0x00dbdbdb00dbdbdbULL, 0x001c1c1c001c1c1cULL, 0x009e9e9e009e9e9eULL,
+	0x009c9c9c009c9c9cULL, 0x003a3a3a003a3a3aULL, 0x00cacaca00cacacaULL,
+	0x0025252500252525ULL, 0x007b7b7b007b7b7bULL, 0x000d0d0d000d0d0dULL,
+	0x0071717100717171ULL, 0x005f5f5f005f5f5fULL, 0x001f1f1f001f1f1fULL,
+	0x00f8f8f800f8f8f8ULL, 0x00d7d7d700d7d7d7ULL, 0x003e3e3e003e3e3eULL,
+	0x009d9d9d009d9d9dULL, 0x007c7c7c007c7c7cULL, 0x0060606000606060ULL,
+	0x00b9b9b900b9b9b9ULL, 0x00bebebe00bebebeULL, 0x00bcbcbc00bcbcbcULL,
+	0x008b8b8b008b8b8bULL, 0x0016161600161616ULL, 0x0034343400343434ULL,
+	0x004d4d4d004d4d4dULL, 0x00c3c3c300c3c3c3ULL, 0x0072727200727272ULL,
+	0x0095959500959595ULL, 0x00ababab00abababULL, 0x008e8e8e008e8e8eULL,
+	0x00bababa00bababaULL, 0x007a7a7a007a7a7aULL, 0x00b3b3b300b3b3b3ULL,
+	0x0002020200020202ULL, 0x00b4b4b400b4b4b4ULL, 0x00adadad00adadadULL,
+	0x00a2a2a200a2a2a2ULL, 0x00acacac00acacacULL, 0x00d8d8d800d8d8d8ULL,
+	0x009a9a9a009a9a9aULL, 0x0017171700171717ULL, 0x001a1a1a001a1a1aULL,
+	0x0035353500353535ULL, 0x00cccccc00ccccccULL, 0x00f7f7f700f7f7f7ULL,
+	0x0099999900999999ULL, 0x0061616100616161ULL, 0x005a5a5a005a5a5aULL,
+	0x00e8e8e800e8e8e8ULL, 0x0024242400242424ULL, 0x0056565600565656ULL,
+	0x0040404000404040ULL, 0x00e1e1e100e1e1e1ULL, 0x0063636300636363ULL,
+	0x0009090900090909ULL, 0x0033333300333333ULL, 0x00bfbfbf00bfbfbfULL,
+	0x0098989800989898ULL, 0x0097979700979797ULL, 0x0085858500858585ULL,
+	0x0068686800686868ULL, 0x00fcfcfc00fcfcfcULL, 0x00ececec00ecececULL,
+	0x000a0a0a000a0a0aULL, 0x00dadada00dadadaULL, 0x006f6f6f006f6f6fULL,
+	0x0053535300535353ULL, 0x0062626200626262ULL, 0x00a3a3a300a3a3a3ULL,
+	0x002e2e2e002e2e2eULL, 0x0008080800080808ULL, 0x00afafaf00afafafULL,
+	0x0028282800282828ULL, 0x00b0b0b000b0b0b0ULL, 0x0074747400747474ULL,
+	0x00c2c2c200c2c2c2ULL, 0x00bdbdbd00bdbdbdULL, 0x0036363600363636ULL,
+	0x0022222200222222ULL, 0x0038383800383838ULL, 0x0064646400646464ULL,
+	0x001e1e1e001e1e1eULL, 0x0039393900393939ULL, 0x002c2c2c002c2c2cULL,
+	0x00a6a6a600a6a6a6ULL, 0x0030303000303030ULL, 0x00e5e5e500e5e5e5ULL,
+	0x0044444400444444ULL, 0x00fdfdfd00fdfdfdULL, 0x0088888800888888ULL,
+	0x009f9f9f009f9f9fULL, 0x0065656500656565ULL, 0x0087878700878787ULL,
+	0x006b6b6b006b6b6bULL, 0x00f4f4f400f4f4f4ULL, 0x0023232300232323ULL,
+	0x0048484800484848ULL, 0x0010101000101010ULL, 0x00d1d1d100d1d1d1ULL,
+	0x0051515100515151ULL, 0x00c0c0c000c0c0c0ULL, 0x00f9f9f900f9f9f9ULL,
+	0x00d2d2d200d2d2d2ULL, 0x00a0a0a000a0a0a0ULL, 0x0055555500555555ULL,
+	0x00a1a1a100a1a1a1ULL, 0x0041414100414141ULL, 0x00fafafa00fafafaULL,
+	0x0043434300434343ULL, 0x0013131300131313ULL, 0x00c4c4c400c4c4c4ULL,
+	0x002f2f2f002f2f2fULL, 0x00a8a8a800a8a8a8ULL, 0x00b6b6b600b6b6b6ULL,
+	0x003c3c3c003c3c3cULL, 0x002b2b2b002b2b2bULL, 0x00c1c1c100c1c1c1ULL,
+	0x00ffffff00ffffffULL, 0x00c8c8c800c8c8c8ULL, 0x00a5a5a500a5a5a5ULL,
+	0x0020202000202020ULL, 0x0089898900898989ULL, 0x0000000000000000ULL,
+	0x0090909000909090ULL, 0x0047474700474747ULL, 0x00efefef00efefefULL,
+	0x00eaeaea00eaeaeaULL, 0x00b7b7b700b7b7b7ULL, 0x0015151500151515ULL,
+	0x0006060600060606ULL, 0x00cdcdcd00cdcdcdULL, 0x00b5b5b500b5b5b5ULL,
+	0x0012121200121212ULL, 0x007e7e7e007e7e7eULL, 0x00bbbbbb00bbbbbbULL,
+	0x0029292900292929ULL, 0x000f0f0f000f0f0fULL, 0x00b8b8b800b8b8b8ULL,
+	0x0007070700070707ULL, 0x0004040400040404ULL, 0x009b9b9b009b9b9bULL,
+	0x0094949400949494ULL, 0x0021212100212121ULL, 0x0066666600666666ULL,
+	0x00e6e6e600e6e6e6ULL, 0x00cecece00cececeULL, 0x00ededed00edededULL,
+	0x00e7e7e700e7e7e7ULL, 0x003b3b3b003b3b3bULL, 0x00fefefe00fefefeULL,
+	0x007f7f7f007f7f7fULL, 0x00c5c5c500c5c5c5ULL, 0x00a4a4a400a4a4a4ULL,
+	0x0037373700373737ULL, 0x00b1b1b100b1b1b1ULL, 0x004c4c4c004c4c4cULL,
+	0x0091919100919191ULL, 0x006e6e6e006e6e6eULL, 0x008d8d8d008d8d8dULL,
+	0x0076767600767676ULL, 0x0003030300030303ULL, 0x002d2d2d002d2d2dULL,
+	0x00dedede00dededeULL, 0x0096969600969696ULL, 0x0026262600262626ULL,
+	0x007d7d7d007d7d7dULL, 0x00c6c6c600c6c6c6ULL, 0x005c5c5c005c5c5cULL,
+	0x00d3d3d300d3d3d3ULL, 0x00f2f2f200f2f2f2ULL, 0x004f4f4f004f4f4fULL,
+	0x0019191900191919ULL, 0x003f3f3f003f3f3fULL, 0x00dcdcdc00dcdcdcULL,
+	0x0079797900797979ULL, 0x001d1d1d001d1d1dULL, 0x0052525200525252ULL,
+	0x00ebebeb00ebebebULL, 0x00f3f3f300f3f3f3ULL, 0x006d6d6d006d6d6dULL,
+	0x005e5e5e005e5e5eULL, 0x00fbfbfb00fbfbfbULL, 0x0069696900696969ULL,
+	0x00b2b2b200b2b2b2ULL, 0x00f0f0f000f0f0f0ULL, 0x0031313100313131ULL,
+	0x000c0c0c000c0c0cULL, 0x00d4d4d400d4d4d4ULL, 0x00cfcfcf00cfcfcfULL,
+	0x008c8c8c008c8c8cULL, 0x00e2e2e200e2e2e2ULL, 0x0075757500757575ULL,
+	0x00a9a9a900a9a9a9ULL, 0x004a4a4a004a4a4aULL, 0x0057575700575757ULL,
+	0x0084848400848484ULL, 0x0011111100111111ULL, 0x0045454500454545ULL,
+	0x001b1b1b001b1b1bULL, 0x00f5f5f500f5f5f5ULL, 0x00e4e4e400e4e4e4ULL,
+	0x000e0e0e000e0e0eULL, 0x0073737300737373ULL, 0x00aaaaaa00aaaaaaULL,
+	0x00f1f1f100f1f1f1ULL, 0x00dddddd00ddddddULL, 0x0059595900595959ULL,
+	0x0014141400141414ULL, 0x006c6c6c006c6c6cULL, 0x0092929200929292ULL,
+	0x0054545400545454ULL, 0x00d0d0d000d0d0d0ULL, 0x0078787800787878ULL,
+	0x0070707000707070ULL, 0x00e3e3e300e3e3e3ULL, 0x0049494900494949ULL,
+	0x0080808000808080ULL, 0x0050505000505050ULL, 0x00a7a7a700a7a7a7ULL,
+	0x00f6f6f600f6f6f6ULL, 0x0077777700777777ULL, 0x0093939300939393ULL,
+	0x0086868600868686ULL, 0x0083838300838383ULL, 0x002a2a2a002a2a2aULL,
+	0x00c7c7c700c7c7c7ULL, 0x005b5b5b005b5b5bULL, 0x00e9e9e900e9e9e9ULL,
+	0x00eeeeee00eeeeeeULL, 0x008f8f8f008f8f8fULL, 0x0001010100010101ULL,
+	0x003d3d3d003d3d3dULL,
 };
 
 const u64 camellia_sp30333033[256] = {
-	0x3800383838003838, 0x4100414141004141, 0x1600161616001616,
-	0x7600767676007676, 0xd900d9d9d900d9d9, 0x9300939393009393,
-	0x6000606060006060, 0xf200f2f2f200f2f2, 0x7200727272007272,
-	0xc200c2c2c200c2c2, 0xab00ababab00abab, 0x9a009a9a9a009a9a,
-	0x7500757575007575, 0x0600060606000606, 0x5700575757005757,
-	0xa000a0a0a000a0a0, 0x9100919191009191, 0xf700f7f7f700f7f7,
-	0xb500b5b5b500b5b5, 0xc900c9c9c900c9c9, 0xa200a2a2a200a2a2,
-	0x8c008c8c8c008c8c, 0xd200d2d2d200d2d2, 0x9000909090009090,
-	0xf600f6f6f600f6f6, 0x0700070707000707, 0xa700a7a7a700a7a7,
-	0x2700272727002727, 0x8e008e8e8e008e8e, 0xb200b2b2b200b2b2,
-	0x4900494949004949, 0xde00dedede00dede, 0x4300434343004343,
-	0x5c005c5c5c005c5c, 0xd700d7d7d700d7d7, 0xc700c7c7c700c7c7,
-	0x3e003e3e3e003e3e, 0xf500f5f5f500f5f5, 0x8f008f8f8f008f8f,
-	0x6700676767006767, 0x1f001f1f1f001f1f, 0x1800181818001818,
-	0x6e006e6e6e006e6e, 0xaf00afafaf00afaf, 0x2f002f2f2f002f2f,
-	0xe200e2e2e200e2e2, 0x8500858585008585, 0x0d000d0d0d000d0d,
-	0x5300535353005353, 0xf000f0f0f000f0f0, 0x9c009c9c9c009c9c,
-	0x6500656565006565, 0xea00eaeaea00eaea, 0xa300a3a3a300a3a3,
-	0xae00aeaeae00aeae, 0x9e009e9e9e009e9e, 0xec00ececec00ecec,
-	0x8000808080008080, 0x2d002d2d2d002d2d, 0x6b006b6b6b006b6b,
-	0xa800a8a8a800a8a8, 0x2b002b2b2b002b2b, 0x3600363636003636,
-	0xa600a6a6a600a6a6, 0xc500c5c5c500c5c5, 0x8600868686008686,
-	0x4d004d4d4d004d4d, 0x3300333333003333, 0xfd00fdfdfd00fdfd,
-	0x6600666666006666, 0x5800585858005858, 0x9600969696009696,
-	0x3a003a3a3a003a3a, 0x0900090909000909, 0x9500959595009595,
-	0x1000101010001010, 0x7800787878007878, 0xd800d8d8d800d8d8,
-	0x4200424242004242, 0xcc00cccccc00cccc, 0xef00efefef00efef,
-	0x2600262626002626, 0xe500e5e5e500e5e5, 0x6100616161006161,
-	0x1a001a1a1a001a1a, 0x3f003f3f3f003f3f, 0x3b003b3b3b003b3b,
-	0x8200828282008282, 0xb600b6b6b600b6b6, 0xdb00dbdbdb00dbdb,
-	0xd400d4d4d400d4d4, 0x9800989898009898, 0xe800e8e8e800e8e8,
-	0x8b008b8b8b008b8b, 0x0200020202000202, 0xeb00ebebeb00ebeb,
-	0x0a000a0a0a000a0a, 0x2c002c2c2c002c2c, 0x1d001d1d1d001d1d,
-	0xb000b0b0b000b0b0, 0x6f006f6f6f006f6f, 0x8d008d8d8d008d8d,
-	0x8800888888008888, 0x0e000e0e0e000e0e, 0x1900191919001919,
-	0x8700878787008787, 0x4e004e4e4e004e4e, 0x0b000b0b0b000b0b,
-	0xa900a9a9a900a9a9, 0x0c000c0c0c000c0c, 0x7900797979007979,
-	0x1100111111001111, 0x7f007f7f7f007f7f, 0x2200222222002222,
-	0xe700e7e7e700e7e7, 0x5900595959005959, 0xe100e1e1e100e1e1,
-	0xda00dadada00dada, 0x3d003d3d3d003d3d, 0xc800c8c8c800c8c8,
-	0x1200121212001212, 0x0400040404000404, 0x7400747474007474,
-	0x5400545454005454, 0x3000303030003030, 0x7e007e7e7e007e7e,
-	0xb400b4b4b400b4b4, 0x2800282828002828, 0x5500555555005555,
-	0x6800686868006868, 0x5000505050005050, 0xbe00bebebe00bebe,
-	0xd000d0d0d000d0d0, 0xc400c4c4c400c4c4, 0x3100313131003131,
-	0xcb00cbcbcb00cbcb, 0x2a002a2a2a002a2a, 0xad00adadad00adad,
-	0x0f000f0f0f000f0f, 0xca00cacaca00caca, 0x7000707070007070,
-	0xff00ffffff00ffff, 0x3200323232003232, 0x6900696969006969,
-	0x0800080808000808, 0x6200626262006262, 0x0000000000000000,
-	0x2400242424002424, 0xd100d1d1d100d1d1, 0xfb00fbfbfb00fbfb,
-	0xba00bababa00baba, 0xed00ededed00eded, 0x4500454545004545,
-	0x8100818181008181, 0x7300737373007373, 0x6d006d6d6d006d6d,
-	0x8400848484008484, 0x9f009f9f9f009f9f, 0xee00eeeeee00eeee,
-	0x4a004a4a4a004a4a, 0xc300c3c3c300c3c3, 0x2e002e2e2e002e2e,
-	0xc100c1c1c100c1c1, 0x0100010101000101, 0xe600e6e6e600e6e6,
-	0x2500252525002525, 0x4800484848004848, 0x9900999999009999,
-	0xb900b9b9b900b9b9, 0xb300b3b3b300b3b3, 0x7b007b7b7b007b7b,
-	0xf900f9f9f900f9f9, 0xce00cecece00cece, 0xbf00bfbfbf00bfbf,
-	0xdf00dfdfdf00dfdf, 0x7100717171007171, 0x2900292929002929,
-	0xcd00cdcdcd00cdcd, 0x6c006c6c6c006c6c, 0x1300131313001313,
-	0x6400646464006464, 0x9b009b9b9b009b9b, 0x6300636363006363,
-	0x9d009d9d9d009d9d, 0xc000c0c0c000c0c0, 0x4b004b4b4b004b4b,
-	0xb700b7b7b700b7b7, 0xa500a5a5a500a5a5, 0x8900898989008989,
-	0x5f005f5f5f005f5f, 0xb100b1b1b100b1b1, 0x1700171717001717,
-	0xf400f4f4f400f4f4, 0xbc00bcbcbc00bcbc, 0xd300d3d3d300d3d3,
-	0x4600464646004646, 0xcf00cfcfcf00cfcf, 0x3700373737003737,
-	0x5e005e5e5e005e5e, 0x4700474747004747, 0x9400949494009494,
-	0xfa00fafafa00fafa, 0xfc00fcfcfc00fcfc, 0x5b005b5b5b005b5b,
-	0x9700979797009797, 0xfe00fefefe00fefe, 0x5a005a5a5a005a5a,
-	0xac00acacac00acac, 0x3c003c3c3c003c3c, 0x4c004c4c4c004c4c,
-	0x0300030303000303, 0x3500353535003535, 0xf300f3f3f300f3f3,
-	0x2300232323002323, 0xb800b8b8b800b8b8, 0x5d005d5d5d005d5d,
-	0x6a006a6a6a006a6a, 0x9200929292009292, 0xd500d5d5d500d5d5,
-	0x2100212121002121, 0x4400444444004444, 0x5100515151005151,
-	0xc600c6c6c600c6c6, 0x7d007d7d7d007d7d, 0x3900393939003939,
-	0x8300838383008383, 0xdc00dcdcdc00dcdc, 0xaa00aaaaaa00aaaa,
-	0x7c007c7c7c007c7c, 0x7700777777007777, 0x5600565656005656,
-	0x0500050505000505, 0x1b001b1b1b001b1b, 0xa400a4a4a400a4a4,
-	0x1500151515001515, 0x3400343434003434, 0x1e001e1e1e001e1e,
-	0x1c001c1c1c001c1c, 0xf800f8f8f800f8f8, 0x5200525252005252,
-	0x2000202020002020, 0x1400141414001414, 0xe900e9e9e900e9e9,
-	0xbd00bdbdbd00bdbd, 0xdd00dddddd00dddd, 0xe400e4e4e400e4e4,
-	0xa100a1a1a100a1a1, 0xe000e0e0e000e0e0, 0x8a008a8a8a008a8a,
-	0xf100f1f1f100f1f1, 0xd600d6d6d600d6d6, 0x7a007a7a7a007a7a,
-	0xbb00bbbbbb00bbbb, 0xe300e3e3e300e3e3, 0x4000404040004040,
-	0x4f004f4f4f004f4f,
+	0x3800383838003838ULL, 0x4100414141004141ULL, 0x1600161616001616ULL,
+	0x7600767676007676ULL, 0xd900d9d9d900d9d9ULL, 0x9300939393009393ULL,
+	0x6000606060006060ULL, 0xf200f2f2f200f2f2ULL, 0x7200727272007272ULL,
+	0xc200c2c2c200c2c2ULL, 0xab00ababab00ababULL, 0x9a009a9a9a009a9aULL,
+	0x7500757575007575ULL, 0x0600060606000606ULL, 0x5700575757005757ULL,
+	0xa000a0a0a000a0a0ULL, 0x9100919191009191ULL, 0xf700f7f7f700f7f7ULL,
+	0xb500b5b5b500b5b5ULL, 0xc900c9c9c900c9c9ULL, 0xa200a2a2a200a2a2ULL,
+	0x8c008c8c8c008c8cULL, 0xd200d2d2d200d2d2ULL, 0x9000909090009090ULL,
+	0xf600f6f6f600f6f6ULL, 0x0700070707000707ULL, 0xa700a7a7a700a7a7ULL,
+	0x2700272727002727ULL, 0x8e008e8e8e008e8eULL, 0xb200b2b2b200b2b2ULL,
+	0x4900494949004949ULL, 0xde00dedede00dedeULL, 0x4300434343004343ULL,
+	0x5c005c5c5c005c5cULL, 0xd700d7d7d700d7d7ULL, 0xc700c7c7c700c7c7ULL,
+	0x3e003e3e3e003e3eULL, 0xf500f5f5f500f5f5ULL, 0x8f008f8f8f008f8fULL,
+	0x6700676767006767ULL, 0x1f001f1f1f001f1fULL, 0x1800181818001818ULL,
+	0x6e006e6e6e006e6eULL, 0xaf00afafaf00afafULL, 0x2f002f2f2f002f2fULL,
+	0xe200e2e2e200e2e2ULL, 0x8500858585008585ULL, 0x0d000d0d0d000d0dULL,
+	0x5300535353005353ULL, 0xf000f0f0f000f0f0ULL, 0x9c009c9c9c009c9cULL,
+	0x6500656565006565ULL, 0xea00eaeaea00eaeaULL, 0xa300a3a3a300a3a3ULL,
+	0xae00aeaeae00aeaeULL, 0x9e009e9e9e009e9eULL, 0xec00ececec00ececULL,
+	0x8000808080008080ULL, 0x2d002d2d2d002d2dULL, 0x6b006b6b6b006b6bULL,
+	0xa800a8a8a800a8a8ULL, 0x2b002b2b2b002b2bULL, 0x3600363636003636ULL,
+	0xa600a6a6a600a6a6ULL, 0xc500c5c5c500c5c5ULL, 0x8600868686008686ULL,
+	0x4d004d4d4d004d4dULL, 0x3300333333003333ULL, 0xfd00fdfdfd00fdfdULL,
+	0x6600666666006666ULL, 0x5800585858005858ULL, 0x9600969696009696ULL,
+	0x3a003a3a3a003a3aULL, 0x0900090909000909ULL, 0x9500959595009595ULL,
+	0x1000101010001010ULL, 0x7800787878007878ULL, 0xd800d8d8d800d8d8ULL,
+	0x4200424242004242ULL, 0xcc00cccccc00ccccULL, 0xef00efefef00efefULL,
+	0x2600262626002626ULL, 0xe500e5e5e500e5e5ULL, 0x6100616161006161ULL,
+	0x1a001a1a1a001a1aULL, 0x3f003f3f3f003f3fULL, 0x3b003b3b3b003b3bULL,
+	0x8200828282008282ULL, 0xb600b6b6b600b6b6ULL, 0xdb00dbdbdb00dbdbULL,
+	0xd400d4d4d400d4d4ULL, 0x9800989898009898ULL, 0xe800e8e8e800e8e8ULL,
+	0x8b008b8b8b008b8bULL, 0x0200020202000202ULL, 0xeb00ebebeb00ebebULL,
+	0x0a000a0a0a000a0aULL, 0x2c002c2c2c002c2cULL, 0x1d001d1d1d001d1dULL,
+	0xb000b0b0b000b0b0ULL, 0x6f006f6f6f006f6fULL, 0x8d008d8d8d008d8dULL,
+	0x8800888888008888ULL, 0x0e000e0e0e000e0eULL, 0x1900191919001919ULL,
+	0x8700878787008787ULL, 0x4e004e4e4e004e4eULL, 0x0b000b0b0b000b0bULL,
+	0xa900a9a9a900a9a9ULL, 0x0c000c0c0c000c0cULL, 0x7900797979007979ULL,
+	0x1100111111001111ULL, 0x7f007f7f7f007f7fULL, 0x2200222222002222ULL,
+	0xe700e7e7e700e7e7ULL, 0x5900595959005959ULL, 0xe100e1e1e100e1e1ULL,
+	0xda00dadada00dadaULL, 0x3d003d3d3d003d3dULL, 0xc800c8c8c800c8c8ULL,
+	0x1200121212001212ULL, 0x0400040404000404ULL, 0x7400747474007474ULL,
+	0x5400545454005454ULL, 0x3000303030003030ULL, 0x7e007e7e7e007e7eULL,
+	0xb400b4b4b400b4b4ULL, 0x2800282828002828ULL, 0x5500555555005555ULL,
+	0x6800686868006868ULL, 0x5000505050005050ULL, 0xbe00bebebe00bebeULL,
+	0xd000d0d0d000d0d0ULL, 0xc400c4c4c400c4c4ULL, 0x3100313131003131ULL,
+	0xcb00cbcbcb00cbcbULL, 0x2a002a2a2a002a2aULL, 0xad00adadad00adadULL,
+	0x0f000f0f0f000f0fULL, 0xca00cacaca00cacaULL, 0x7000707070007070ULL,
+	0xff00ffffff00ffffULL, 0x3200323232003232ULL, 0x6900696969006969ULL,
+	0x0800080808000808ULL, 0x6200626262006262ULL, 0x0000000000000000ULL,
+	0x2400242424002424ULL, 0xd100d1d1d100d1d1ULL, 0xfb00fbfbfb00fbfbULL,
+	0xba00bababa00babaULL, 0xed00ededed00ededULL, 0x4500454545004545ULL,
+	0x8100818181008181ULL, 0x7300737373007373ULL, 0x6d006d6d6d006d6dULL,
+	0x8400848484008484ULL, 0x9f009f9f9f009f9fULL, 0xee00eeeeee00eeeeULL,
+	0x4a004a4a4a004a4aULL, 0xc300c3c3c300c3c3ULL, 0x2e002e2e2e002e2eULL,
+	0xc100c1c1c100c1c1ULL, 0x0100010101000101ULL, 0xe600e6e6e600e6e6ULL,
+	0x2500252525002525ULL, 0x4800484848004848ULL, 0x9900999999009999ULL,
+	0xb900b9b9b900b9b9ULL, 0xb300b3b3b300b3b3ULL, 0x7b007b7b7b007b7bULL,
+	0xf900f9f9f900f9f9ULL, 0xce00cecece00ceceULL, 0xbf00bfbfbf00bfbfULL,
+	0xdf00dfdfdf00dfdfULL, 0x7100717171007171ULL, 0x2900292929002929ULL,
+	0xcd00cdcdcd00cdcdULL, 0x6c006c6c6c006c6cULL, 0x1300131313001313ULL,
+	0x6400646464006464ULL, 0x9b009b9b9b009b9bULL, 0x6300636363006363ULL,
+	0x9d009d9d9d009d9dULL, 0xc000c0c0c000c0c0ULL, 0x4b004b4b4b004b4bULL,
+	0xb700b7b7b700b7b7ULL, 0xa500a5a5a500a5a5ULL, 0x8900898989008989ULL,
+	0x5f005f5f5f005f5fULL, 0xb100b1b1b100b1b1ULL, 0x1700171717001717ULL,
+	0xf400f4f4f400f4f4ULL, 0xbc00bcbcbc00bcbcULL, 0xd300d3d3d300d3d3ULL,
+	0x4600464646004646ULL, 0xcf00cfcfcf00cfcfULL, 0x3700373737003737ULL,
+	0x5e005e5e5e005e5eULL, 0x4700474747004747ULL, 0x9400949494009494ULL,
+	0xfa00fafafa00fafaULL, 0xfc00fcfcfc00fcfcULL, 0x5b005b5b5b005b5bULL,
+	0x9700979797009797ULL, 0xfe00fefefe00fefeULL, 0x5a005a5a5a005a5aULL,
+	0xac00acacac00acacULL, 0x3c003c3c3c003c3cULL, 0x4c004c4c4c004c4cULL,
+	0x0300030303000303ULL, 0x3500353535003535ULL, 0xf300f3f3f300f3f3ULL,
+	0x2300232323002323ULL, 0xb800b8b8b800b8b8ULL, 0x5d005d5d5d005d5dULL,
+	0x6a006a6a6a006a6aULL, 0x9200929292009292ULL, 0xd500d5d5d500d5d5ULL,
+	0x2100212121002121ULL, 0x4400444444004444ULL, 0x5100515151005151ULL,
+	0xc600c6c6c600c6c6ULL, 0x7d007d7d7d007d7dULL, 0x3900393939003939ULL,
+	0x8300838383008383ULL, 0xdc00dcdcdc00dcdcULL, 0xaa00aaaaaa00aaaaULL,
+	0x7c007c7c7c007c7cULL, 0x7700777777007777ULL, 0x5600565656005656ULL,
+	0x0500050505000505ULL, 0x1b001b1b1b001b1bULL, 0xa400a4a4a400a4a4ULL,
+	0x1500151515001515ULL, 0x3400343434003434ULL, 0x1e001e1e1e001e1eULL,
+	0x1c001c1c1c001c1cULL, 0xf800f8f8f800f8f8ULL, 0x5200525252005252ULL,
+	0x2000202020002020ULL, 0x1400141414001414ULL, 0xe900e9e9e900e9e9ULL,
+	0xbd00bdbdbd00bdbdULL, 0xdd00dddddd00ddddULL, 0xe400e4e4e400e4e4ULL,
+	0xa100a1a1a100a1a1ULL, 0xe000e0e0e000e0e0ULL, 0x8a008a8a8a008a8aULL,
+	0xf100f1f1f100f1f1ULL, 0xd600d6d6d600d6d6ULL, 0x7a007a7a7a007a7aULL,
+	0xbb00bbbbbb00bbbbULL, 0xe300e3e3e300e3e3ULL, 0x4000404040004040ULL,
+	0x4f004f4f4f004f4fULL,
 };
 
 const u64 camellia_sp44044404[256] = {
-	0x7070007070700070, 0x2c2c002c2c2c002c, 0xb3b300b3b3b300b3,
-	0xc0c000c0c0c000c0, 0xe4e400e4e4e400e4, 0x5757005757570057,
-	0xeaea00eaeaea00ea, 0xaeae00aeaeae00ae, 0x2323002323230023,
-	0x6b6b006b6b6b006b, 0x4545004545450045, 0xa5a500a5a5a500a5,
-	0xeded00ededed00ed, 0x4f4f004f4f4f004f, 0x1d1d001d1d1d001d,
-	0x9292009292920092, 0x8686008686860086, 0xafaf00afafaf00af,
-	0x7c7c007c7c7c007c, 0x1f1f001f1f1f001f, 0x3e3e003e3e3e003e,
-	0xdcdc00dcdcdc00dc, 0x5e5e005e5e5e005e, 0x0b0b000b0b0b000b,
-	0xa6a600a6a6a600a6, 0x3939003939390039, 0xd5d500d5d5d500d5,
-	0x5d5d005d5d5d005d, 0xd9d900d9d9d900d9, 0x5a5a005a5a5a005a,
-	0x5151005151510051, 0x6c6c006c6c6c006c, 0x8b8b008b8b8b008b,
-	0x9a9a009a9a9a009a, 0xfbfb00fbfbfb00fb, 0xb0b000b0b0b000b0,
-	0x7474007474740074, 0x2b2b002b2b2b002b, 0xf0f000f0f0f000f0,
-	0x8484008484840084, 0xdfdf00dfdfdf00df, 0xcbcb00cbcbcb00cb,
-	0x3434003434340034, 0x7676007676760076, 0x6d6d006d6d6d006d,
-	0xa9a900a9a9a900a9, 0xd1d100d1d1d100d1, 0x0404000404040004,
-	0x1414001414140014, 0x3a3a003a3a3a003a, 0xdede00dedede00de,
-	0x1111001111110011, 0x3232003232320032, 0x9c9c009c9c9c009c,
-	0x5353005353530053, 0xf2f200f2f2f200f2, 0xfefe00fefefe00fe,
-	0xcfcf00cfcfcf00cf, 0xc3c300c3c3c300c3, 0x7a7a007a7a7a007a,
-	0x2424002424240024, 0xe8e800e8e8e800e8, 0x6060006060600060,
-	0x6969006969690069, 0xaaaa00aaaaaa00aa, 0xa0a000a0a0a000a0,
-	0xa1a100a1a1a100a1, 0x6262006262620062, 0x5454005454540054,
-	0x1e1e001e1e1e001e, 0xe0e000e0e0e000e0, 0x6464006464640064,
-	0x1010001010100010, 0x0000000000000000, 0xa3a300a3a3a300a3,
-	0x7575007575750075, 0x8a8a008a8a8a008a, 0xe6e600e6e6e600e6,
-	0x0909000909090009, 0xdddd00dddddd00dd, 0x8787008787870087,
-	0x8383008383830083, 0xcdcd00cdcdcd00cd, 0x9090009090900090,
-	0x7373007373730073, 0xf6f600f6f6f600f6, 0x9d9d009d9d9d009d,
-	0xbfbf00bfbfbf00bf, 0x5252005252520052, 0xd8d800d8d8d800d8,
-	0xc8c800c8c8c800c8, 0xc6c600c6c6c600c6, 0x8181008181810081,
-	0x6f6f006f6f6f006f, 0x1313001313130013, 0x6363006363630063,
-	0xe9e900e9e9e900e9, 0xa7a700a7a7a700a7, 0x9f9f009f9f9f009f,
-	0xbcbc00bcbcbc00bc, 0x2929002929290029, 0xf9f900f9f9f900f9,
-	0x2f2f002f2f2f002f, 0xb4b400b4b4b400b4, 0x7878007878780078,
-	0x0606000606060006, 0xe7e700e7e7e700e7, 0x7171007171710071,
-	0xd4d400d4d4d400d4, 0xabab00ababab00ab, 0x8888008888880088,
-	0x8d8d008d8d8d008d, 0x7272007272720072, 0xb9b900b9b9b900b9,
-	0xf8f800f8f8f800f8, 0xacac00acacac00ac, 0x3636003636360036,
-	0x2a2a002a2a2a002a, 0x3c3c003c3c3c003c, 0xf1f100f1f1f100f1,
-	0x4040004040400040, 0xd3d300d3d3d300d3, 0xbbbb00bbbbbb00bb,
-	0x4343004343430043, 0x1515001515150015, 0xadad00adadad00ad,
-	0x7777007777770077, 0x8080008080800080, 0x8282008282820082,
-	0xecec00ececec00ec, 0x2727002727270027, 0xe5e500e5e5e500e5,
-	0x8585008585850085, 0x3535003535350035, 0x0c0c000c0c0c000c,
-	0x4141004141410041, 0xefef00efefef00ef, 0x9393009393930093,
-	0x1919001919190019, 0x2121002121210021, 0x0e0e000e0e0e000e,
-	0x4e4e004e4e4e004e, 0x6565006565650065, 0xbdbd00bdbdbd00bd,
-	0xb8b800b8b8b800b8, 0x8f8f008f8f8f008f, 0xebeb00ebebeb00eb,
-	0xcece00cecece00ce, 0x3030003030300030, 0x5f5f005f5f5f005f,
-	0xc5c500c5c5c500c5, 0x1a1a001a1a1a001a, 0xe1e100e1e1e100e1,
-	0xcaca00cacaca00ca, 0x4747004747470047, 0x3d3d003d3d3d003d,
-	0x0101000101010001, 0xd6d600d6d6d600d6, 0x5656005656560056,
-	0x4d4d004d4d4d004d, 0x0d0d000d0d0d000d, 0x6666006666660066,
-	0xcccc00cccccc00cc, 0x2d2d002d2d2d002d, 0x1212001212120012,
-	0x2020002020200020, 0xb1b100b1b1b100b1, 0x9999009999990099,
-	0x4c4c004c4c4c004c, 0xc2c200c2c2c200c2, 0x7e7e007e7e7e007e,
-	0x0505000505050005, 0xb7b700b7b7b700b7, 0x3131003131310031,
-	0x1717001717170017, 0xd7d700d7d7d700d7, 0x5858005858580058,
-	0x6161006161610061, 0x1b1b001b1b1b001b, 0x1c1c001c1c1c001c,
-	0x0f0f000f0f0f000f, 0x1616001616160016, 0x1818001818180018,
-	0x2222002222220022, 0x4444004444440044, 0xb2b200b2b2b200b2,
-	0xb5b500b5b5b500b5, 0x9191009191910091, 0x0808000808080008,
-	0xa8a800a8a8a800a8, 0xfcfc00fcfcfc00fc, 0x5050005050500050,
-	0xd0d000d0d0d000d0, 0x7d7d007d7d7d007d, 0x8989008989890089,
-	0x9797009797970097, 0x5b5b005b5b5b005b, 0x9595009595950095,
-	0xffff00ffffff00ff, 0xd2d200d2d2d200d2, 0xc4c400c4c4c400c4,
-	0x4848004848480048, 0xf7f700f7f7f700f7, 0xdbdb00dbdbdb00db,
-	0x0303000303030003, 0xdada00dadada00da, 0x3f3f003f3f3f003f,
-	0x9494009494940094, 0x5c5c005c5c5c005c, 0x0202000202020002,
-	0x4a4a004a4a4a004a, 0x3333003333330033, 0x6767006767670067,
-	0xf3f300f3f3f300f3, 0x7f7f007f7f7f007f, 0xe2e200e2e2e200e2,
-	0x9b9b009b9b9b009b, 0x2626002626260026, 0x3737003737370037,
-	0x3b3b003b3b3b003b, 0x9696009696960096, 0x4b4b004b4b4b004b,
-	0xbebe00bebebe00be, 0x2e2e002e2e2e002e, 0x7979007979790079,
-	0x8c8c008c8c8c008c, 0x6e6e006e6e6e006e, 0x8e8e008e8e8e008e,
-	0xf5f500f5f5f500f5, 0xb6b600b6b6b600b6, 0xfdfd00fdfdfd00fd,
-	0x5959005959590059, 0x9898009898980098, 0x6a6a006a6a6a006a,
-	0x4646004646460046, 0xbaba00bababa00ba, 0x2525002525250025,
-	0x4242004242420042, 0xa2a200a2a2a200a2, 0xfafa00fafafa00fa,
-	0x0707000707070007, 0x5555005555550055, 0xeeee00eeeeee00ee,
-	0x0a0a000a0a0a000a, 0x4949004949490049, 0x6868006868680068,
-	0x3838003838380038, 0xa4a400a4a4a400a4, 0x2828002828280028,
-	0x7b7b007b7b7b007b, 0xc9c900c9c9c900c9, 0xc1c100c1c1c100c1,
-	0xe3e300e3e3e300e3, 0xf4f400f4f4f400f4, 0xc7c700c7c7c700c7,
-	0x9e9e009e9e9e009e,
+	0x7070007070700070ULL, 0x2c2c002c2c2c002cULL, 0xb3b300b3b3b300b3ULL,
+	0xc0c000c0c0c000c0ULL, 0xe4e400e4e4e400e4ULL, 0x5757005757570057ULL,
+	0xeaea00eaeaea00eaULL, 0xaeae00aeaeae00aeULL, 0x2323002323230023ULL,
+	0x6b6b006b6b6b006bULL, 0x4545004545450045ULL, 0xa5a500a5a5a500a5ULL,
+	0xeded00ededed00edULL, 0x4f4f004f4f4f004fULL, 0x1d1d001d1d1d001dULL,
+	0x9292009292920092ULL, 0x8686008686860086ULL, 0xafaf00afafaf00afULL,
+	0x7c7c007c7c7c007cULL, 0x1f1f001f1f1f001fULL, 0x3e3e003e3e3e003eULL,
+	0xdcdc00dcdcdc00dcULL, 0x5e5e005e5e5e005eULL, 0x0b0b000b0b0b000bULL,
+	0xa6a600a6a6a600a6ULL, 0x3939003939390039ULL, 0xd5d500d5d5d500d5ULL,
+	0x5d5d005d5d5d005dULL, 0xd9d900d9d9d900d9ULL, 0x5a5a005a5a5a005aULL,
+	0x5151005151510051ULL, 0x6c6c006c6c6c006cULL, 0x8b8b008b8b8b008bULL,
+	0x9a9a009a9a9a009aULL, 0xfbfb00fbfbfb00fbULL, 0xb0b000b0b0b000b0ULL,
+	0x7474007474740074ULL, 0x2b2b002b2b2b002bULL, 0xf0f000f0f0f000f0ULL,
+	0x8484008484840084ULL, 0xdfdf00dfdfdf00dfULL, 0xcbcb00cbcbcb00cbULL,
+	0x3434003434340034ULL, 0x7676007676760076ULL, 0x6d6d006d6d6d006dULL,
+	0xa9a900a9a9a900a9ULL, 0xd1d100d1d1d100d1ULL, 0x0404000404040004ULL,
+	0x1414001414140014ULL, 0x3a3a003a3a3a003aULL, 0xdede00dedede00deULL,
+	0x1111001111110011ULL, 0x3232003232320032ULL, 0x9c9c009c9c9c009cULL,
+	0x5353005353530053ULL, 0xf2f200f2f2f200f2ULL, 0xfefe00fefefe00feULL,
+	0xcfcf00cfcfcf00cfULL, 0xc3c300c3c3c300c3ULL, 0x7a7a007a7a7a007aULL,
+	0x2424002424240024ULL, 0xe8e800e8e8e800e8ULL, 0x6060006060600060ULL,
+	0x6969006969690069ULL, 0xaaaa00aaaaaa00aaULL, 0xa0a000a0a0a000a0ULL,
+	0xa1a100a1a1a100a1ULL, 0x6262006262620062ULL, 0x5454005454540054ULL,
+	0x1e1e001e1e1e001eULL, 0xe0e000e0e0e000e0ULL, 0x6464006464640064ULL,
+	0x1010001010100010ULL, 0x0000000000000000ULL, 0xa3a300a3a3a300a3ULL,
+	0x7575007575750075ULL, 0x8a8a008a8a8a008aULL, 0xe6e600e6e6e600e6ULL,
+	0x0909000909090009ULL, 0xdddd00dddddd00ddULL, 0x8787008787870087ULL,
+	0x8383008383830083ULL, 0xcdcd00cdcdcd00cdULL, 0x9090009090900090ULL,
+	0x7373007373730073ULL, 0xf6f600f6f6f600f6ULL, 0x9d9d009d9d9d009dULL,
+	0xbfbf00bfbfbf00bfULL, 0x5252005252520052ULL, 0xd8d800d8d8d800d8ULL,
+	0xc8c800c8c8c800c8ULL, 0xc6c600c6c6c600c6ULL, 0x8181008181810081ULL,
+	0x6f6f006f6f6f006fULL, 0x1313001313130013ULL, 0x6363006363630063ULL,
+	0xe9e900e9e9e900e9ULL, 0xa7a700a7a7a700a7ULL, 0x9f9f009f9f9f009fULL,
+	0xbcbc00bcbcbc00bcULL, 0x2929002929290029ULL, 0xf9f900f9f9f900f9ULL,
+	0x2f2f002f2f2f002fULL, 0xb4b400b4b4b400b4ULL, 0x7878007878780078ULL,
+	0x0606000606060006ULL, 0xe7e700e7e7e700e7ULL, 0x7171007171710071ULL,
+	0xd4d400d4d4d400d4ULL, 0xabab00ababab00abULL, 0x8888008888880088ULL,
+	0x8d8d008d8d8d008dULL, 0x7272007272720072ULL, 0xb9b900b9b9b900b9ULL,
+	0xf8f800f8f8f800f8ULL, 0xacac00acacac00acULL, 0x3636003636360036ULL,
+	0x2a2a002a2a2a002aULL, 0x3c3c003c3c3c003cULL, 0xf1f100f1f1f100f1ULL,
+	0x4040004040400040ULL, 0xd3d300d3d3d300d3ULL, 0xbbbb00bbbbbb00bbULL,
+	0x4343004343430043ULL, 0x1515001515150015ULL, 0xadad00adadad00adULL,
+	0x7777007777770077ULL, 0x8080008080800080ULL, 0x8282008282820082ULL,
+	0xecec00ececec00ecULL, 0x2727002727270027ULL, 0xe5e500e5e5e500e5ULL,
+	0x8585008585850085ULL, 0x3535003535350035ULL, 0x0c0c000c0c0c000cULL,
+	0x4141004141410041ULL, 0xefef00efefef00efULL, 0x9393009393930093ULL,
+	0x1919001919190019ULL, 0x2121002121210021ULL, 0x0e0e000e0e0e000eULL,
+	0x4e4e004e4e4e004eULL, 0x6565006565650065ULL, 0xbdbd00bdbdbd00bdULL,
+	0xb8b800b8b8b800b8ULL, 0x8f8f008f8f8f008fULL, 0xebeb00ebebeb00ebULL,
+	0xcece00cecece00ceULL, 0x3030003030300030ULL, 0x5f5f005f5f5f005fULL,
+	0xc5c500c5c5c500c5ULL, 0x1a1a001a1a1a001aULL, 0xe1e100e1e1e100e1ULL,
+	0xcaca00cacaca00caULL, 0x4747004747470047ULL, 0x3d3d003d3d3d003dULL,
+	0x0101000101010001ULL, 0xd6d600d6d6d600d6ULL, 0x5656005656560056ULL,
+	0x4d4d004d4d4d004dULL, 0x0d0d000d0d0d000dULL, 0x6666006666660066ULL,
+	0xcccc00cccccc00ccULL, 0x2d2d002d2d2d002dULL, 0x1212001212120012ULL,
+	0x2020002020200020ULL, 0xb1b100b1b1b100b1ULL, 0x9999009999990099ULL,
+	0x4c4c004c4c4c004cULL, 0xc2c200c2c2c200c2ULL, 0x7e7e007e7e7e007eULL,
+	0x0505000505050005ULL, 0xb7b700b7b7b700b7ULL, 0x3131003131310031ULL,
+	0x1717001717170017ULL, 0xd7d700d7d7d700d7ULL, 0x5858005858580058ULL,
+	0x6161006161610061ULL, 0x1b1b001b1b1b001bULL, 0x1c1c001c1c1c001cULL,
+	0x0f0f000f0f0f000fULL, 0x1616001616160016ULL, 0x1818001818180018ULL,
+	0x2222002222220022ULL, 0x4444004444440044ULL, 0xb2b200b2b2b200b2ULL,
+	0xb5b500b5b5b500b5ULL, 0x9191009191910091ULL, 0x0808000808080008ULL,
+	0xa8a800a8a8a800a8ULL, 0xfcfc00fcfcfc00fcULL, 0x5050005050500050ULL,
+	0xd0d000d0d0d000d0ULL, 0x7d7d007d7d7d007dULL, 0x8989008989890089ULL,
+	0x9797009797970097ULL, 0x5b5b005b5b5b005bULL, 0x9595009595950095ULL,
+	0xffff00ffffff00ffULL, 0xd2d200d2d2d200d2ULL, 0xc4c400c4c4c400c4ULL,
+	0x4848004848480048ULL, 0xf7f700f7f7f700f7ULL, 0xdbdb00dbdbdb00dbULL,
+	0x0303000303030003ULL, 0xdada00dadada00daULL, 0x3f3f003f3f3f003fULL,
+	0x9494009494940094ULL, 0x5c5c005c5c5c005cULL, 0x0202000202020002ULL,
+	0x4a4a004a4a4a004aULL, 0x3333003333330033ULL, 0x6767006767670067ULL,
+	0xf3f300f3f3f300f3ULL, 0x7f7f007f7f7f007fULL, 0xe2e200e2e2e200e2ULL,
+	0x9b9b009b9b9b009bULL, 0x2626002626260026ULL, 0x3737003737370037ULL,
+	0x3b3b003b3b3b003bULL, 0x9696009696960096ULL, 0x4b4b004b4b4b004bULL,
+	0xbebe00bebebe00beULL, 0x2e2e002e2e2e002eULL, 0x7979007979790079ULL,
+	0x8c8c008c8c8c008cULL, 0x6e6e006e6e6e006eULL, 0x8e8e008e8e8e008eULL,
+	0xf5f500f5f5f500f5ULL, 0xb6b600b6b6b600b6ULL, 0xfdfd00fdfdfd00fdULL,
+	0x5959005959590059ULL, 0x9898009898980098ULL, 0x6a6a006a6a6a006aULL,
+	0x4646004646460046ULL, 0xbaba00bababa00baULL, 0x2525002525250025ULL,
+	0x4242004242420042ULL, 0xa2a200a2a2a200a2ULL, 0xfafa00fafafa00faULL,
+	0x0707000707070007ULL, 0x5555005555550055ULL, 0xeeee00eeeeee00eeULL,
+	0x0a0a000a0a0a000aULL, 0x4949004949490049ULL, 0x6868006868680068ULL,
+	0x3838003838380038ULL, 0xa4a400a4a4a400a4ULL, 0x2828002828280028ULL,
+	0x7b7b007b7b7b007bULL, 0xc9c900c9c9c900c9ULL, 0xc1c100c1c1c100c1ULL,
+	0xe3e300e3e3e300e3ULL, 0xf4f400f4f4f400f4ULL, 0xc7c700c7c7c700c7ULL,
+	0x9e9e009e9e9e009eULL,
 };
 
 const u64 camellia_sp11101110[256] = {
-	0x7070700070707000, 0x8282820082828200, 0x2c2c2c002c2c2c00,
-	0xececec00ececec00, 0xb3b3b300b3b3b300, 0x2727270027272700,
-	0xc0c0c000c0c0c000, 0xe5e5e500e5e5e500, 0xe4e4e400e4e4e400,
-	0x8585850085858500, 0x5757570057575700, 0x3535350035353500,
-	0xeaeaea00eaeaea00, 0x0c0c0c000c0c0c00, 0xaeaeae00aeaeae00,
-	0x4141410041414100, 0x2323230023232300, 0xefefef00efefef00,
-	0x6b6b6b006b6b6b00, 0x9393930093939300, 0x4545450045454500,
-	0x1919190019191900, 0xa5a5a500a5a5a500, 0x2121210021212100,
-	0xededed00ededed00, 0x0e0e0e000e0e0e00, 0x4f4f4f004f4f4f00,
-	0x4e4e4e004e4e4e00, 0x1d1d1d001d1d1d00, 0x6565650065656500,
-	0x9292920092929200, 0xbdbdbd00bdbdbd00, 0x8686860086868600,
-	0xb8b8b800b8b8b800, 0xafafaf00afafaf00, 0x8f8f8f008f8f8f00,
-	0x7c7c7c007c7c7c00, 0xebebeb00ebebeb00, 0x1f1f1f001f1f1f00,
-	0xcecece00cecece00, 0x3e3e3e003e3e3e00, 0x3030300030303000,
-	0xdcdcdc00dcdcdc00, 0x5f5f5f005f5f5f00, 0x5e5e5e005e5e5e00,
-	0xc5c5c500c5c5c500, 0x0b0b0b000b0b0b00, 0x1a1a1a001a1a1a00,
-	0xa6a6a600a6a6a600, 0xe1e1e100e1e1e100, 0x3939390039393900,
-	0xcacaca00cacaca00, 0xd5d5d500d5d5d500, 0x4747470047474700,
-	0x5d5d5d005d5d5d00, 0x3d3d3d003d3d3d00, 0xd9d9d900d9d9d900,
-	0x0101010001010100, 0x5a5a5a005a5a5a00, 0xd6d6d600d6d6d600,
-	0x5151510051515100, 0x5656560056565600, 0x6c6c6c006c6c6c00,
-	0x4d4d4d004d4d4d00, 0x8b8b8b008b8b8b00, 0x0d0d0d000d0d0d00,
-	0x9a9a9a009a9a9a00, 0x6666660066666600, 0xfbfbfb00fbfbfb00,
-	0xcccccc00cccccc00, 0xb0b0b000b0b0b000, 0x2d2d2d002d2d2d00,
-	0x7474740074747400, 0x1212120012121200, 0x2b2b2b002b2b2b00,
-	0x2020200020202000, 0xf0f0f000f0f0f000, 0xb1b1b100b1b1b100,
-	0x8484840084848400, 0x9999990099999900, 0xdfdfdf00dfdfdf00,
-	0x4c4c4c004c4c4c00, 0xcbcbcb00cbcbcb00, 0xc2c2c200c2c2c200,
-	0x3434340034343400, 0x7e7e7e007e7e7e00, 0x7676760076767600,
-	0x0505050005050500, 0x6d6d6d006d6d6d00, 0xb7b7b700b7b7b700,
-	0xa9a9a900a9a9a900, 0x3131310031313100, 0xd1d1d100d1d1d100,
-	0x1717170017171700, 0x0404040004040400, 0xd7d7d700d7d7d700,
-	0x1414140014141400, 0x5858580058585800, 0x3a3a3a003a3a3a00,
-	0x6161610061616100, 0xdedede00dedede00, 0x1b1b1b001b1b1b00,
-	0x1111110011111100, 0x1c1c1c001c1c1c00, 0x3232320032323200,
-	0x0f0f0f000f0f0f00, 0x9c9c9c009c9c9c00, 0x1616160016161600,
-	0x5353530053535300, 0x1818180018181800, 0xf2f2f200f2f2f200,
-	0x2222220022222200, 0xfefefe00fefefe00, 0x4444440044444400,
-	0xcfcfcf00cfcfcf00, 0xb2b2b200b2b2b200, 0xc3c3c300c3c3c300,
-	0xb5b5b500b5b5b500, 0x7a7a7a007a7a7a00, 0x9191910091919100,
-	0x2424240024242400, 0x0808080008080800, 0xe8e8e800e8e8e800,
-	0xa8a8a800a8a8a800, 0x6060600060606000, 0xfcfcfc00fcfcfc00,
-	0x6969690069696900, 0x5050500050505000, 0xaaaaaa00aaaaaa00,
-	0xd0d0d000d0d0d000, 0xa0a0a000a0a0a000, 0x7d7d7d007d7d7d00,
-	0xa1a1a100a1a1a100, 0x8989890089898900, 0x6262620062626200,
-	0x9797970097979700, 0x5454540054545400, 0x5b5b5b005b5b5b00,
-	0x1e1e1e001e1e1e00, 0x9595950095959500, 0xe0e0e000e0e0e000,
-	0xffffff00ffffff00, 0x6464640064646400, 0xd2d2d200d2d2d200,
-	0x1010100010101000, 0xc4c4c400c4c4c400, 0x0000000000000000,
-	0x4848480048484800, 0xa3a3a300a3a3a300, 0xf7f7f700f7f7f700,
-	0x7575750075757500, 0xdbdbdb00dbdbdb00, 0x8a8a8a008a8a8a00,
-	0x0303030003030300, 0xe6e6e600e6e6e600, 0xdadada00dadada00,
-	0x0909090009090900, 0x3f3f3f003f3f3f00, 0xdddddd00dddddd00,
-	0x9494940094949400, 0x8787870087878700, 0x5c5c5c005c5c5c00,
-	0x8383830083838300, 0x0202020002020200, 0xcdcdcd00cdcdcd00,
-	0x4a4a4a004a4a4a00, 0x9090900090909000, 0x3333330033333300,
-	0x7373730073737300, 0x6767670067676700, 0xf6f6f600f6f6f600,
-	0xf3f3f300f3f3f300, 0x9d9d9d009d9d9d00, 0x7f7f7f007f7f7f00,
-	0xbfbfbf00bfbfbf00, 0xe2e2e200e2e2e200, 0x5252520052525200,
-	0x9b9b9b009b9b9b00, 0xd8d8d800d8d8d800, 0x2626260026262600,
-	0xc8c8c800c8c8c800, 0x3737370037373700, 0xc6c6c600c6c6c600,
-	0x3b3b3b003b3b3b00, 0x8181810081818100, 0x9696960096969600,
-	0x6f6f6f006f6f6f00, 0x4b4b4b004b4b4b00, 0x1313130013131300,
-	0xbebebe00bebebe00, 0x6363630063636300, 0x2e2e2e002e2e2e00,
-	0xe9e9e900e9e9e900, 0x7979790079797900, 0xa7a7a700a7a7a700,
-	0x8c8c8c008c8c8c00, 0x9f9f9f009f9f9f00, 0x6e6e6e006e6e6e00,
-	0xbcbcbc00bcbcbc00, 0x8e8e8e008e8e8e00, 0x2929290029292900,
-	0xf5f5f500f5f5f500, 0xf9f9f900f9f9f900, 0xb6b6b600b6b6b600,
-	0x2f2f2f002f2f2f00, 0xfdfdfd00fdfdfd00, 0xb4b4b400b4b4b400,
-	0x5959590059595900, 0x7878780078787800, 0x9898980098989800,
-	0x0606060006060600, 0x6a6a6a006a6a6a00, 0xe7e7e700e7e7e700,
-	0x4646460046464600, 0x7171710071717100, 0xbababa00bababa00,
-	0xd4d4d400d4d4d400, 0x2525250025252500, 0xababab00ababab00,
-	0x4242420042424200, 0x8888880088888800, 0xa2a2a200a2a2a200,
-	0x8d8d8d008d8d8d00, 0xfafafa00fafafa00, 0x7272720072727200,
-	0x0707070007070700, 0xb9b9b900b9b9b900, 0x5555550055555500,
-	0xf8f8f800f8f8f800, 0xeeeeee00eeeeee00, 0xacacac00acacac00,
-	0x0a0a0a000a0a0a00, 0x3636360036363600, 0x4949490049494900,
-	0x2a2a2a002a2a2a00, 0x6868680068686800, 0x3c3c3c003c3c3c00,
-	0x3838380038383800, 0xf1f1f100f1f1f100, 0xa4a4a400a4a4a400,
-	0x4040400040404000, 0x2828280028282800, 0xd3d3d300d3d3d300,
-	0x7b7b7b007b7b7b00, 0xbbbbbb00bbbbbb00, 0xc9c9c900c9c9c900,
-	0x4343430043434300, 0xc1c1c100c1c1c100, 0x1515150015151500,
-	0xe3e3e300e3e3e300, 0xadadad00adadad00, 0xf4f4f400f4f4f400,
-	0x7777770077777700, 0xc7c7c700c7c7c700, 0x8080800080808000,
-	0x9e9e9e009e9e9e00,
+	0x7070700070707000ULL, 0x8282820082828200ULL, 0x2c2c2c002c2c2c00ULL,
+	0xececec00ececec00ULL, 0xb3b3b300b3b3b300ULL, 0x2727270027272700ULL,
+	0xc0c0c000c0c0c000ULL, 0xe5e5e500e5e5e500ULL, 0xe4e4e400e4e4e400ULL,
+	0x8585850085858500ULL, 0x5757570057575700ULL, 0x3535350035353500ULL,
+	0xeaeaea00eaeaea00ULL, 0x0c0c0c000c0c0c00ULL, 0xaeaeae00aeaeae00ULL,
+	0x4141410041414100ULL, 0x2323230023232300ULL, 0xefefef00efefef00ULL,
+	0x6b6b6b006b6b6b00ULL, 0x9393930093939300ULL, 0x4545450045454500ULL,
+	0x1919190019191900ULL, 0xa5a5a500a5a5a500ULL, 0x2121210021212100ULL,
+	0xededed00ededed00ULL, 0x0e0e0e000e0e0e00ULL, 0x4f4f4f004f4f4f00ULL,
+	0x4e4e4e004e4e4e00ULL, 0x1d1d1d001d1d1d00ULL, 0x6565650065656500ULL,
+	0x9292920092929200ULL, 0xbdbdbd00bdbdbd00ULL, 0x8686860086868600ULL,
+	0xb8b8b800b8b8b800ULL, 0xafafaf00afafaf00ULL, 0x8f8f8f008f8f8f00ULL,
+	0x7c7c7c007c7c7c00ULL, 0xebebeb00ebebeb00ULL, 0x1f1f1f001f1f1f00ULL,
+	0xcecece00cecece00ULL, 0x3e3e3e003e3e3e00ULL, 0x3030300030303000ULL,
+	0xdcdcdc00dcdcdc00ULL, 0x5f5f5f005f5f5f00ULL, 0x5e5e5e005e5e5e00ULL,
+	0xc5c5c500c5c5c500ULL, 0x0b0b0b000b0b0b00ULL, 0x1a1a1a001a1a1a00ULL,
+	0xa6a6a600a6a6a600ULL, 0xe1e1e100e1e1e100ULL, 0x3939390039393900ULL,
+	0xcacaca00cacaca00ULL, 0xd5d5d500d5d5d500ULL, 0x4747470047474700ULL,
+	0x5d5d5d005d5d5d00ULL, 0x3d3d3d003d3d3d00ULL, 0xd9d9d900d9d9d900ULL,
+	0x0101010001010100ULL, 0x5a5a5a005a5a5a00ULL, 0xd6d6d600d6d6d600ULL,
+	0x5151510051515100ULL, 0x5656560056565600ULL, 0x6c6c6c006c6c6c00ULL,
+	0x4d4d4d004d4d4d00ULL, 0x8b8b8b008b8b8b00ULL, 0x0d0d0d000d0d0d00ULL,
+	0x9a9a9a009a9a9a00ULL, 0x6666660066666600ULL, 0xfbfbfb00fbfbfb00ULL,
+	0xcccccc00cccccc00ULL, 0xb0b0b000b0b0b000ULL, 0x2d2d2d002d2d2d00ULL,
+	0x7474740074747400ULL, 0x1212120012121200ULL, 0x2b2b2b002b2b2b00ULL,
+	0x2020200020202000ULL, 0xf0f0f000f0f0f000ULL, 0xb1b1b100b1b1b100ULL,
+	0x8484840084848400ULL, 0x9999990099999900ULL, 0xdfdfdf00dfdfdf00ULL,
+	0x4c4c4c004c4c4c00ULL, 0xcbcbcb00cbcbcb00ULL, 0xc2c2c200c2c2c200ULL,
+	0x3434340034343400ULL, 0x7e7e7e007e7e7e00ULL, 0x7676760076767600ULL,
+	0x0505050005050500ULL, 0x6d6d6d006d6d6d00ULL, 0xb7b7b700b7b7b700ULL,
+	0xa9a9a900a9a9a900ULL, 0x3131310031313100ULL, 0xd1d1d100d1d1d100ULL,
+	0x1717170017171700ULL, 0x0404040004040400ULL, 0xd7d7d700d7d7d700ULL,
+	0x1414140014141400ULL, 0x5858580058585800ULL, 0x3a3a3a003a3a3a00ULL,
+	0x6161610061616100ULL, 0xdedede00dedede00ULL, 0x1b1b1b001b1b1b00ULL,
+	0x1111110011111100ULL, 0x1c1c1c001c1c1c00ULL, 0x3232320032323200ULL,
+	0x0f0f0f000f0f0f00ULL, 0x9c9c9c009c9c9c00ULL, 0x1616160016161600ULL,
+	0x5353530053535300ULL, 0x1818180018181800ULL, 0xf2f2f200f2f2f200ULL,
+	0x2222220022222200ULL, 0xfefefe00fefefe00ULL, 0x4444440044444400ULL,
+	0xcfcfcf00cfcfcf00ULL, 0xb2b2b200b2b2b200ULL, 0xc3c3c300c3c3c300ULL,
+	0xb5b5b500b5b5b500ULL, 0x7a7a7a007a7a7a00ULL, 0x9191910091919100ULL,
+	0x2424240024242400ULL, 0x0808080008080800ULL, 0xe8e8e800e8e8e800ULL,
+	0xa8a8a800a8a8a800ULL, 0x6060600060606000ULL, 0xfcfcfc00fcfcfc00ULL,
+	0x6969690069696900ULL, 0x5050500050505000ULL, 0xaaaaaa00aaaaaa00ULL,
+	0xd0d0d000d0d0d000ULL, 0xa0a0a000a0a0a000ULL, 0x7d7d7d007d7d7d00ULL,
+	0xa1a1a100a1a1a100ULL, 0x8989890089898900ULL, 0x6262620062626200ULL,
+	0x9797970097979700ULL, 0x5454540054545400ULL, 0x5b5b5b005b5b5b00ULL,
+	0x1e1e1e001e1e1e00ULL, 0x9595950095959500ULL, 0xe0e0e000e0e0e000ULL,
+	0xffffff00ffffff00ULL, 0x6464640064646400ULL, 0xd2d2d200d2d2d200ULL,
+	0x1010100010101000ULL, 0xc4c4c400c4c4c400ULL, 0x0000000000000000ULL,
+	0x4848480048484800ULL, 0xa3a3a300a3a3a300ULL, 0xf7f7f700f7f7f700ULL,
+	0x7575750075757500ULL, 0xdbdbdb00dbdbdb00ULL, 0x8a8a8a008a8a8a00ULL,
+	0x0303030003030300ULL, 0xe6e6e600e6e6e600ULL, 0xdadada00dadada00ULL,
+	0x0909090009090900ULL, 0x3f3f3f003f3f3f00ULL, 0xdddddd00dddddd00ULL,
+	0x9494940094949400ULL, 0x8787870087878700ULL, 0x5c5c5c005c5c5c00ULL,
+	0x8383830083838300ULL, 0x0202020002020200ULL, 0xcdcdcd00cdcdcd00ULL,
+	0x4a4a4a004a4a4a00ULL, 0x9090900090909000ULL, 0x3333330033333300ULL,
+	0x7373730073737300ULL, 0x6767670067676700ULL, 0xf6f6f600f6f6f600ULL,
+	0xf3f3f300f3f3f300ULL, 0x9d9d9d009d9d9d00ULL, 0x7f7f7f007f7f7f00ULL,
+	0xbfbfbf00bfbfbf00ULL, 0xe2e2e200e2e2e200ULL, 0x5252520052525200ULL,
+	0x9b9b9b009b9b9b00ULL, 0xd8d8d800d8d8d800ULL, 0x2626260026262600ULL,
+	0xc8c8c800c8c8c800ULL, 0x3737370037373700ULL, 0xc6c6c600c6c6c600ULL,
+	0x3b3b3b003b3b3b00ULL, 0x8181810081818100ULL, 0x9696960096969600ULL,
+	0x6f6f6f006f6f6f00ULL, 0x4b4b4b004b4b4b00ULL, 0x1313130013131300ULL,
+	0xbebebe00bebebe00ULL, 0x6363630063636300ULL, 0x2e2e2e002e2e2e00ULL,
+	0xe9e9e900e9e9e900ULL, 0x7979790079797900ULL, 0xa7a7a700a7a7a700ULL,
+	0x8c8c8c008c8c8c00ULL, 0x9f9f9f009f9f9f00ULL, 0x6e6e6e006e6e6e00ULL,
+	0xbcbcbc00bcbcbc00ULL, 0x8e8e8e008e8e8e00ULL, 0x2929290029292900ULL,
+	0xf5f5f500f5f5f500ULL, 0xf9f9f900f9f9f900ULL, 0xb6b6b600b6b6b600ULL,
+	0x2f2f2f002f2f2f00ULL, 0xfdfdfd00fdfdfd00ULL, 0xb4b4b400b4b4b400ULL,
+	0x5959590059595900ULL, 0x7878780078787800ULL, 0x9898980098989800ULL,
+	0x0606060006060600ULL, 0x6a6a6a006a6a6a00ULL, 0xe7e7e700e7e7e700ULL,
+	0x4646460046464600ULL, 0x7171710071717100ULL, 0xbababa00bababa00ULL,
+	0xd4d4d400d4d4d400ULL, 0x2525250025252500ULL, 0xababab00ababab00ULL,
+	0x4242420042424200ULL, 0x8888880088888800ULL, 0xa2a2a200a2a2a200ULL,
+	0x8d8d8d008d8d8d00ULL, 0xfafafa00fafafa00ULL, 0x7272720072727200ULL,
+	0x0707070007070700ULL, 0xb9b9b900b9b9b900ULL, 0x5555550055555500ULL,
+	0xf8f8f800f8f8f800ULL, 0xeeeeee00eeeeee00ULL, 0xacacac00acacac00ULL,
+	0x0a0a0a000a0a0a00ULL, 0x3636360036363600ULL, 0x4949490049494900ULL,
+	0x2a2a2a002a2a2a00ULL, 0x6868680068686800ULL, 0x3c3c3c003c3c3c00ULL,
+	0x3838380038383800ULL, 0xf1f1f100f1f1f100ULL, 0xa4a4a400a4a4a400ULL,
+	0x4040400040404000ULL, 0x2828280028282800ULL, 0xd3d3d300d3d3d300ULL,
+	0x7b7b7b007b7b7b00ULL, 0xbbbbbb00bbbbbb00ULL, 0xc9c9c900c9c9c900ULL,
+	0x4343430043434300ULL, 0xc1c1c100c1c1c100ULL, 0x1515150015151500ULL,
+	0xe3e3e300e3e3e300ULL, 0xadadad00adadad00ULL, 0xf4f4f400f4f4f400ULL,
+	0x7777770077777700ULL, 0xc7c7c700c7c7c700ULL, 0x8080800080808000ULL,
+	0x9e9e9e009e9e9e00ULL,
 };
 
 /* key constants */
@@ -1601,7 +1601,6 @@ static struct crypto_alg camellia_algs[6] = { {
 	.cra_ctxsize		= sizeof(struct camellia_ctx),
 	.cra_alignmask		= 0,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(camellia_algs[0].cra_list),
 	.cra_u			= {
 		.cipher = {
 			.cia_min_keysize = CAMELLIA_MIN_KEY_SIZE,
@@ -1621,7 +1620,6 @@ static struct crypto_alg camellia_algs[6] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(camellia_algs[1].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= CAMELLIA_MIN_KEY_SIZE,
@@ -1641,7 +1639,6 @@ static struct crypto_alg camellia_algs[6] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(camellia_algs[2].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= CAMELLIA_MIN_KEY_SIZE,
@@ -1662,7 +1659,6 @@ static struct crypto_alg camellia_algs[6] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(camellia_algs[3].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= CAMELLIA_MIN_KEY_SIZE,
@@ -1683,7 +1679,6 @@ static struct crypto_alg camellia_algs[6] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(camellia_algs[4].cra_list),
 	.cra_exit		= lrw_exit_tfm,
 	.cra_u = {
 		.blkcipher = {
@@ -1707,7 +1702,6 @@ static struct crypto_alg camellia_algs[6] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(camellia_algs[5].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= CAMELLIA_MIN_KEY_SIZE * 2,
diff --git a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
new file mode 100644
index 000000000000..a41a3aaba220
--- /dev/null
+++ b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
@@ -0,0 +1,376 @@
+/*
+ * Cast5 Cipher 16-way parallel algorithm (AVX/x86_64)
+ *
+ * Copyright (C) 2012 Johannes Goetzfried
+ *     <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
+ *
+ * Copyright © 2012 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ * USA
+ *
+ */
+
+.file "cast5-avx-x86_64-asm_64.S"
+
+.extern cast5_s1
+.extern cast5_s2
+.extern cast5_s3
+.extern cast5_s4
+
+/* structure of crypto context */
+#define km	0
+#define kr	(16*4)
+#define rr	((16*4)+16)
+
+/* s-boxes */
+#define s1	cast5_s1
+#define s2	cast5_s2
+#define s3	cast5_s3
+#define s4	cast5_s4
+
+/**********************************************************************
+  16-way AVX cast5
+ **********************************************************************/
+#define CTX %rdi
+
+#define RL1 %xmm0
+#define RR1 %xmm1
+#define RL2 %xmm2
+#define RR2 %xmm3
+#define RL3 %xmm4
+#define RR3 %xmm5
+#define RL4 %xmm6
+#define RR4 %xmm7
+
+#define RX %xmm8
+
+#define RKM  %xmm9
+#define RKR  %xmm10
+#define RKRF %xmm11
+#define RKRR %xmm12
+
+#define R32  %xmm13
+#define R1ST %xmm14
+
+#define RTMP %xmm15
+
+#define RID1  %rbp
+#define RID1d %ebp
+#define RID2  %rsi
+#define RID2d %esi
+
+#define RGI1   %rdx
+#define RGI1bl %dl
+#define RGI1bh %dh
+#define RGI2   %rcx
+#define RGI2bl %cl
+#define RGI2bh %ch
+
+#define RGI3   %rax
+#define RGI3bl %al
+#define RGI3bh %ah
+#define RGI4   %rbx
+#define RGI4bl %bl
+#define RGI4bh %bh
+
+#define RFS1  %r8
+#define RFS1d %r8d
+#define RFS2  %r9
+#define RFS2d %r9d
+#define RFS3  %r10
+#define RFS3d %r10d
+
+
+#define lookup_32bit(src, dst, op1, op2, op3, interleave_op, il_reg) \
+	movzbl		src ## bh,     RID1d;    \
+	movzbl		src ## bl,     RID2d;    \
+	shrq $16,	src;                     \
+	movl		s1(, RID1, 4), dst ## d; \
+	op1		s2(, RID2, 4), dst ## d; \
+	movzbl		src ## bh,     RID1d;    \
+	movzbl		src ## bl,     RID2d;    \
+	interleave_op(il_reg);			 \
+	op2		s3(, RID1, 4), dst ## d; \
+	op3		s4(, RID2, 4), dst ## d;
+
+#define dummy(d) /* do nothing */
+
+#define shr_next(reg) \
+	shrq $16,	reg;
+
+#define F_head(a, x, gi1, gi2, op0) \
+	op0	a,	RKM,  x;                 \
+	vpslld	RKRF,	x,    RTMP;              \
+	vpsrld	RKRR,	x,    x;                 \
+	vpor	RTMP,	x,    x;                 \
+	\
+	vmovq		x,    gi1;               \
+	vpextrq $1,	x,    gi2;
+
+#define F_tail(a, x, gi1, gi2, op1, op2, op3) \
+	lookup_32bit(##gi1, RFS1, op1, op2, op3, shr_next, ##gi1); \
+	lookup_32bit(##gi2, RFS3, op1, op2, op3, shr_next, ##gi2); \
+	\
+	lookup_32bit(##gi1, RFS2, op1, op2, op3, dummy, none);     \
+	shlq $32,	RFS2;                                      \
+	orq		RFS1, RFS2;                                \
+	lookup_32bit(##gi2, RFS1, op1, op2, op3, dummy, none);     \
+	shlq $32,	RFS1;                                      \
+	orq		RFS1, RFS3;                                \
+	\
+	vmovq		RFS2, x;                                   \
+	vpinsrq $1,	RFS3, x, x;
+
+#define F_2(a1, b1, a2, b2, op0, op1, op2, op3) \
+	F_head(b1, RX, RGI1, RGI2, op0);              \
+	F_head(b2, RX, RGI3, RGI4, op0);              \
+	\
+	F_tail(b1, RX, RGI1, RGI2, op1, op2, op3);    \
+	F_tail(b2, RTMP, RGI3, RGI4, op1, op2, op3);  \
+	\
+	vpxor		a1, RX,   a1;                 \
+	vpxor		a2, RTMP, a2;
+
+#define F1_2(a1, b1, a2, b2) \
+	F_2(a1, b1, a2, b2, vpaddd, xorl, subl, addl)
+#define F2_2(a1, b1, a2, b2) \
+	F_2(a1, b1, a2, b2, vpxor, subl, addl, xorl)
+#define F3_2(a1, b1, a2, b2) \
+	F_2(a1, b1, a2, b2, vpsubd, addl, xorl, subl)
+
+#define subround(a1, b1, a2, b2, f) \
+	F ## f ## _2(a1, b1, a2, b2);
+
+#define round(l, r, n, f) \
+	vbroadcastss 	(km+(4*n))(CTX), RKM;        \
+	vpand		R1ST,            RKR,  RKRF; \
+	vpsubq		RKRF,            R32,  RKRR; \
+	vpsrldq $1,	RKR,             RKR;        \
+	subround(l ## 1, r ## 1, l ## 2, r ## 2, f); \
+	subround(l ## 3, r ## 3, l ## 4, r ## 4, f);
+
+#define enc_preload_rkr() \
+	vbroadcastss	.L16_mask,                RKR;      \
+	/* add 16-bit rotation to key rotations (mod 32) */ \
+	vpxor		kr(CTX),                  RKR, RKR;
+
+#define dec_preload_rkr() \
+	vbroadcastss	.L16_mask,                RKR;      \
+	/* add 16-bit rotation to key rotations (mod 32) */ \
+	vpxor		kr(CTX),                  RKR, RKR; \
+	vpshufb		.Lbswap128_mask,          RKR, RKR;
+
+#define transpose_2x4(x0, x1, t0, t1) \
+	vpunpckldq		x1, x0, t0; \
+	vpunpckhdq		x1, x0, t1; \
+	\
+	vpunpcklqdq		t1, t0, x0; \
+	vpunpckhqdq		t1, t0, x1;
+
+#define inpack_blocks(in, x0, x1, t0, t1, rmask) \
+	vmovdqu (0*4*4)(in),	x0; \
+	vmovdqu (1*4*4)(in),	x1; \
+	vpshufb rmask, 	x0,	x0; \
+	vpshufb rmask, 	x1,	x1; \
+	\
+	transpose_2x4(x0, x1, t0, t1)
+
+#define outunpack_blocks(out, x0, x1, t0, t1, rmask) \
+	transpose_2x4(x0, x1, t0, t1) \
+	\
+	vpshufb rmask,	x0, x0;           \
+	vpshufb rmask,	x1, x1;           \
+	vmovdqu 	x0, (0*4*4)(out); \
+	vmovdqu		x1, (1*4*4)(out);
+
+#define outunpack_xor_blocks(out, x0, x1, t0, t1, rmask) \
+	transpose_2x4(x0, x1, t0, t1) \
+	\
+	vpshufb rmask,	x0, x0;               \
+	vpshufb rmask,	x1, x1;               \
+	vpxor		(0*4*4)(out), x0, x0; \
+	vmovdqu 	x0, (0*4*4)(out);     \
+	vpxor		(1*4*4)(out), x1, x1; \
+	vmovdqu	        x1, (1*4*4)(out);
+
+.data
+
+.align 16
+.Lbswap_mask:
+	.byte 3, 2, 1, 0, 7, 6, 5, 4, 11, 10, 9, 8, 15, 14, 13, 12
+.Lbswap128_mask:
+	.byte 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
+.L16_mask:
+	.byte 16, 16, 16, 16
+.L32_mask:
+	.byte 32, 0, 0, 0
+.Lfirst_mask:
+	.byte 0x1f, 0, 0, 0
+
+.text
+
+.align 16
+.global __cast5_enc_blk_16way
+.type   __cast5_enc_blk_16way,@function;
+
+__cast5_enc_blk_16way:
+	/* input:
+	 *	%rdi: ctx, CTX
+	 *	%rsi: dst
+	 *	%rdx: src
+	 *	%rcx: bool, if true: xor output
+	 */
+
+	pushq %rbp;
+	pushq %rbx;
+	pushq %rcx;
+
+	vmovdqa .Lbswap_mask, RKM;
+	vmovd .Lfirst_mask, R1ST;
+	vmovd .L32_mask, R32;
+	enc_preload_rkr();
+
+	leaq 1*(2*4*4)(%rdx), %rax;
+	inpack_blocks(%rdx, RL1, RR1, RTMP, RX, RKM);
+	inpack_blocks(%rax, RL2, RR2, RTMP, RX, RKM);
+	leaq 2*(2*4*4)(%rdx), %rax;
+	inpack_blocks(%rax, RL3, RR3, RTMP, RX, RKM);
+	leaq 3*(2*4*4)(%rdx), %rax;
+	inpack_blocks(%rax, RL4, RR4, RTMP, RX, RKM);
+
+	movq %rsi, %r11;
+
+	round(RL, RR, 0, 1);
+	round(RR, RL, 1, 2);
+	round(RL, RR, 2, 3);
+	round(RR, RL, 3, 1);
+	round(RL, RR, 4, 2);
+	round(RR, RL, 5, 3);
+	round(RL, RR, 6, 1);
+	round(RR, RL, 7, 2);
+	round(RL, RR, 8, 3);
+	round(RR, RL, 9, 1);
+	round(RL, RR, 10, 2);
+	round(RR, RL, 11, 3);
+
+	movzbl rr(CTX), %eax;
+	testl %eax, %eax;
+	jnz __skip_enc;
+
+	round(RL, RR, 12, 1);
+	round(RR, RL, 13, 2);
+	round(RL, RR, 14, 3);
+	round(RR, RL, 15, 1);
+
+__skip_enc:
+	popq %rcx;
+	popq %rbx;
+	popq %rbp;
+
+	vmovdqa .Lbswap_mask, RKM;
+	leaq 1*(2*4*4)(%r11), %rax;
+
+	testb %cl, %cl;
+	jnz __enc_xor16;
+
+	outunpack_blocks(%r11, RR1, RL1, RTMP, RX, RKM);
+	outunpack_blocks(%rax, RR2, RL2, RTMP, RX, RKM);
+	leaq 2*(2*4*4)(%r11), %rax;
+	outunpack_blocks(%rax, RR3, RL3, RTMP, RX, RKM);
+	leaq 3*(2*4*4)(%r11), %rax;
+	outunpack_blocks(%rax, RR4, RL4, RTMP, RX, RKM);
+
+	ret;
+
+__enc_xor16:
+	outunpack_xor_blocks(%r11, RR1, RL1, RTMP, RX, RKM);
+	outunpack_xor_blocks(%rax, RR2, RL2, RTMP, RX, RKM);
+	leaq 2*(2*4*4)(%r11), %rax;
+	outunpack_xor_blocks(%rax, RR3, RL3, RTMP, RX, RKM);
+	leaq 3*(2*4*4)(%r11), %rax;
+	outunpack_xor_blocks(%rax, RR4, RL4, RTMP, RX, RKM);
+
+	ret;
+
+.align 16
+.global cast5_dec_blk_16way
+.type   cast5_dec_blk_16way,@function;
+
+cast5_dec_blk_16way:
+	/* input:
+	 *	%rdi: ctx, CTX
+	 *	%rsi: dst
+	 *	%rdx: src
+	 */
+
+	pushq %rbp;
+	pushq %rbx;
+
+	vmovdqa .Lbswap_mask, RKM;
+	vmovd .Lfirst_mask, R1ST;
+	vmovd .L32_mask, R32;
+	dec_preload_rkr();
+
+	leaq 1*(2*4*4)(%rdx), %rax;
+	inpack_blocks(%rdx, RL1, RR1, RTMP, RX, RKM);
+	inpack_blocks(%rax, RL2, RR2, RTMP, RX, RKM);
+	leaq 2*(2*4*4)(%rdx), %rax;
+	inpack_blocks(%rax, RL3, RR3, RTMP, RX, RKM);
+	leaq 3*(2*4*4)(%rdx), %rax;
+	inpack_blocks(%rax, RL4, RR4, RTMP, RX, RKM);
+
+	movq %rsi, %r11;
+
+	movzbl rr(CTX), %eax;
+	testl %eax, %eax;
+	jnz __skip_dec;
+
+	round(RL, RR, 15, 1);
+	round(RR, RL, 14, 3);
+	round(RL, RR, 13, 2);
+	round(RR, RL, 12, 1);
+
+__dec_tail:
+	round(RL, RR, 11, 3);
+	round(RR, RL, 10, 2);
+	round(RL, RR, 9, 1);
+	round(RR, RL, 8, 3);
+	round(RL, RR, 7, 2);
+	round(RR, RL, 6, 1);
+	round(RL, RR, 5, 3);
+	round(RR, RL, 4, 2);
+	round(RL, RR, 3, 1);
+	round(RR, RL, 2, 3);
+	round(RL, RR, 1, 2);
+	round(RR, RL, 0, 1);
+
+	vmovdqa .Lbswap_mask, RKM;
+	popq %rbx;
+	popq %rbp;
+
+	leaq 1*(2*4*4)(%r11), %rax;
+	outunpack_blocks(%r11, RR1, RL1, RTMP, RX, RKM);
+	outunpack_blocks(%rax, RR2, RL2, RTMP, RX, RKM);
+	leaq 2*(2*4*4)(%r11), %rax;
+	outunpack_blocks(%rax, RR3, RL3, RTMP, RX, RKM);
+	leaq 3*(2*4*4)(%r11), %rax;
+	outunpack_blocks(%rax, RR4, RL4, RTMP, RX, RKM);
+
+	ret;
+
+__skip_dec:
+	vpsrldq $4, RKR, RKR;
+	jmp __dec_tail;
diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c
new file mode 100644
index 000000000000..e0ea14f9547f
--- /dev/null
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -0,0 +1,530 @@
+/*
+ * Glue Code for the AVX assembler implemention of the Cast5 Cipher
+ *
+ * Copyright (C) 2012 Johannes Goetzfried
+ *     <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/hardirq.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/err.h>
+#include <crypto/algapi.h>
+#include <crypto/cast5.h>
+#include <crypto/cryptd.h>
+#include <crypto/ctr.h>
+#include <asm/xcr.h>
+#include <asm/xsave.h>
+#include <asm/crypto/ablk_helper.h>
+#include <asm/crypto/glue_helper.h>
+
+#define CAST5_PARALLEL_BLOCKS 16
+
+asmlinkage void __cast5_enc_blk_16way(struct cast5_ctx *ctx, u8 *dst,
+				      const u8 *src, bool xor);
+asmlinkage void cast5_dec_blk_16way(struct cast5_ctx *ctx, u8 *dst,
+				    const u8 *src);
+
+static inline void cast5_enc_blk_xway(struct cast5_ctx *ctx, u8 *dst,
+				      const u8 *src)
+{
+	__cast5_enc_blk_16way(ctx, dst, src, false);
+}
+
+static inline void cast5_enc_blk_xway_xor(struct cast5_ctx *ctx, u8 *dst,
+					  const u8 *src)
+{
+	__cast5_enc_blk_16way(ctx, dst, src, true);
+}
+
+static inline void cast5_dec_blk_xway(struct cast5_ctx *ctx, u8 *dst,
+				      const u8 *src)
+{
+	cast5_dec_blk_16way(ctx, dst, src);
+}
+
+
+static inline bool cast5_fpu_begin(bool fpu_enabled, unsigned int nbytes)
+{
+	return glue_fpu_begin(CAST5_BLOCK_SIZE, CAST5_PARALLEL_BLOCKS,
+			      NULL, fpu_enabled, nbytes);
+}
+
+static inline void cast5_fpu_end(bool fpu_enabled)
+{
+	return glue_fpu_end(fpu_enabled);
+}
+
+static int ecb_crypt(struct blkcipher_desc *desc, struct blkcipher_walk *walk,
+		     bool enc)
+{
+	bool fpu_enabled = false;
+	struct cast5_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	const unsigned int bsize = CAST5_BLOCK_SIZE;
+	unsigned int nbytes;
+	int err;
+
+	err = blkcipher_walk_virt(desc, walk);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	while ((nbytes = walk->nbytes)) {
+		u8 *wsrc = walk->src.virt.addr;
+		u8 *wdst = walk->dst.virt.addr;
+
+		fpu_enabled = cast5_fpu_begin(fpu_enabled, nbytes);
+
+		/* Process multi-block batch */
+		if (nbytes >= bsize * CAST5_PARALLEL_BLOCKS) {
+			do {
+				if (enc)
+					cast5_enc_blk_xway(ctx, wdst, wsrc);
+				else
+					cast5_dec_blk_xway(ctx, wdst, wsrc);
+
+				wsrc += bsize * CAST5_PARALLEL_BLOCKS;
+				wdst += bsize * CAST5_PARALLEL_BLOCKS;
+				nbytes -= bsize * CAST5_PARALLEL_BLOCKS;
+			} while (nbytes >= bsize * CAST5_PARALLEL_BLOCKS);
+
+			if (nbytes < bsize)
+				goto done;
+		}
+
+		/* Handle leftovers */
+		do {
+			if (enc)
+				__cast5_encrypt(ctx, wdst, wsrc);
+			else
+				__cast5_decrypt(ctx, wdst, wsrc);
+
+			wsrc += bsize;
+			wdst += bsize;
+			nbytes -= bsize;
+		} while (nbytes >= bsize);
+
+done:
+		err = blkcipher_walk_done(desc, walk, nbytes);
+	}
+
+	cast5_fpu_end(fpu_enabled);
+	return err;
+}
+
+static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct blkcipher_walk walk;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	return ecb_crypt(desc, &walk, true);
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct blkcipher_walk walk;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	return ecb_crypt(desc, &walk, false);
+}
+
+static unsigned int __cbc_encrypt(struct blkcipher_desc *desc,
+				  struct blkcipher_walk *walk)
+{
+	struct cast5_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	const unsigned int bsize = CAST5_BLOCK_SIZE;
+	unsigned int nbytes = walk->nbytes;
+	u64 *src = (u64 *)walk->src.virt.addr;
+	u64 *dst = (u64 *)walk->dst.virt.addr;
+	u64 *iv = (u64 *)walk->iv;
+
+	do {
+		*dst = *src ^ *iv;
+		__cast5_encrypt(ctx, (u8 *)dst, (u8 *)dst);
+		iv = dst;
+
+		src += 1;
+		dst += 1;
+		nbytes -= bsize;
+	} while (nbytes >= bsize);
+
+	*(u64 *)walk->iv = *iv;
+	return nbytes;
+}
+
+static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	while ((nbytes = walk.nbytes)) {
+		nbytes = __cbc_encrypt(desc, &walk);
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+
+	return err;
+}
+
+static unsigned int __cbc_decrypt(struct blkcipher_desc *desc,
+				  struct blkcipher_walk *walk)
+{
+	struct cast5_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	const unsigned int bsize = CAST5_BLOCK_SIZE;
+	unsigned int nbytes = walk->nbytes;
+	u64 *src = (u64 *)walk->src.virt.addr;
+	u64 *dst = (u64 *)walk->dst.virt.addr;
+	u64 ivs[CAST5_PARALLEL_BLOCKS - 1];
+	u64 last_iv;
+	int i;
+
+	/* Start of the last block. */
+	src += nbytes / bsize - 1;
+	dst += nbytes / bsize - 1;
+
+	last_iv = *src;
+
+	/* Process multi-block batch */
+	if (nbytes >= bsize * CAST5_PARALLEL_BLOCKS) {
+		do {
+			nbytes -= bsize * (CAST5_PARALLEL_BLOCKS - 1);
+			src -= CAST5_PARALLEL_BLOCKS - 1;
+			dst -= CAST5_PARALLEL_BLOCKS - 1;
+
+			for (i = 0; i < CAST5_PARALLEL_BLOCKS - 1; i++)
+				ivs[i] = src[i];
+
+			cast5_dec_blk_xway(ctx, (u8 *)dst, (u8 *)src);
+
+			for (i = 0; i < CAST5_PARALLEL_BLOCKS - 1; i++)
+				*(dst + (i + 1)) ^= *(ivs + i);
+
+			nbytes -= bsize;
+			if (nbytes < bsize)
+				goto done;
+
+			*dst ^= *(src - 1);
+			src -= 1;
+			dst -= 1;
+		} while (nbytes >= bsize * CAST5_PARALLEL_BLOCKS);
+
+		if (nbytes < bsize)
+			goto done;
+	}
+
+	/* Handle leftovers */
+	for (;;) {
+		__cast5_decrypt(ctx, (u8 *)dst, (u8 *)src);
+
+		nbytes -= bsize;
+		if (nbytes < bsize)
+			break;
+
+		*dst ^= *(src - 1);
+		src -= 1;
+		dst -= 1;
+	}
+
+done:
+	*dst ^= *(u64 *)walk->iv;
+	*(u64 *)walk->iv = last_iv;
+
+	return nbytes;
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	bool fpu_enabled = false;
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	while ((nbytes = walk.nbytes)) {
+		fpu_enabled = cast5_fpu_begin(fpu_enabled, nbytes);
+		nbytes = __cbc_decrypt(desc, &walk);
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+
+	cast5_fpu_end(fpu_enabled);
+	return err;
+}
+
+static void ctr_crypt_final(struct blkcipher_desc *desc,
+			    struct blkcipher_walk *walk)
+{
+	struct cast5_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	u8 *ctrblk = walk->iv;
+	u8 keystream[CAST5_BLOCK_SIZE];
+	u8 *src = walk->src.virt.addr;
+	u8 *dst = walk->dst.virt.addr;
+	unsigned int nbytes = walk->nbytes;
+
+	__cast5_encrypt(ctx, keystream, ctrblk);
+	crypto_xor(keystream, src, nbytes);
+	memcpy(dst, keystream, nbytes);
+
+	crypto_inc(ctrblk, CAST5_BLOCK_SIZE);
+}
+
+static unsigned int __ctr_crypt(struct blkcipher_desc *desc,
+				struct blkcipher_walk *walk)
+{
+	struct cast5_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	const unsigned int bsize = CAST5_BLOCK_SIZE;
+	unsigned int nbytes = walk->nbytes;
+	u64 *src = (u64 *)walk->src.virt.addr;
+	u64 *dst = (u64 *)walk->dst.virt.addr;
+	u64 ctrblk = be64_to_cpu(*(__be64 *)walk->iv);
+	__be64 ctrblocks[CAST5_PARALLEL_BLOCKS];
+	int i;
+
+	/* Process multi-block batch */
+	if (nbytes >= bsize * CAST5_PARALLEL_BLOCKS) {
+		do {
+			/* create ctrblks for parallel encrypt */
+			for (i = 0; i < CAST5_PARALLEL_BLOCKS; i++) {
+				if (dst != src)
+					dst[i] = src[i];
+
+				ctrblocks[i] = cpu_to_be64(ctrblk++);
+			}
+
+			cast5_enc_blk_xway_xor(ctx, (u8 *)dst,
+					       (u8 *)ctrblocks);
+
+			src += CAST5_PARALLEL_BLOCKS;
+			dst += CAST5_PARALLEL_BLOCKS;
+			nbytes -= bsize * CAST5_PARALLEL_BLOCKS;
+		} while (nbytes >= bsize * CAST5_PARALLEL_BLOCKS);
+
+		if (nbytes < bsize)
+			goto done;
+	}
+
+	/* Handle leftovers */
+	do {
+		if (dst != src)
+			*dst = *src;
+
+		ctrblocks[0] = cpu_to_be64(ctrblk++);
+
+		__cast5_encrypt(ctx, (u8 *)ctrblocks, (u8 *)ctrblocks);
+		*dst ^= ctrblocks[0];
+
+		src += 1;
+		dst += 1;
+		nbytes -= bsize;
+	} while (nbytes >= bsize);
+
+done:
+	*(__be64 *)walk->iv = cpu_to_be64(ctrblk);
+	return nbytes;
+}
+
+static int ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		     struct scatterlist *src, unsigned int nbytes)
+{
+	bool fpu_enabled = false;
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, CAST5_BLOCK_SIZE);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	while ((nbytes = walk.nbytes) >= CAST5_BLOCK_SIZE) {
+		fpu_enabled = cast5_fpu_begin(fpu_enabled, nbytes);
+		nbytes = __ctr_crypt(desc, &walk);
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+
+	cast5_fpu_end(fpu_enabled);
+
+	if (walk.nbytes) {
+		ctr_crypt_final(desc, &walk);
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+
+	return err;
+}
+
+
+static struct crypto_alg cast5_algs[6] = { {
+	.cra_name		= "__ecb-cast5-avx",
+	.cra_driver_name	= "__driver-ecb-cast5-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAST5_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct cast5_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST5_MIN_KEY_SIZE,
+			.max_keysize	= CAST5_MAX_KEY_SIZE,
+			.setkey		= cast5_setkey,
+			.encrypt	= ecb_encrypt,
+			.decrypt	= ecb_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "__cbc-cast5-avx",
+	.cra_driver_name	= "__driver-cbc-cast5-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAST5_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct cast5_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST5_MIN_KEY_SIZE,
+			.max_keysize	= CAST5_MAX_KEY_SIZE,
+			.setkey		= cast5_setkey,
+			.encrypt	= cbc_encrypt,
+			.decrypt	= cbc_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "__ctr-cast5-avx",
+	.cra_driver_name	= "__driver-ctr-cast5-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct cast5_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST5_MIN_KEY_SIZE,
+			.max_keysize	= CAST5_MAX_KEY_SIZE,
+			.ivsize		= CAST5_BLOCK_SIZE,
+			.setkey		= cast5_setkey,
+			.encrypt	= ctr_crypt,
+			.decrypt	= ctr_crypt,
+		},
+	},
+}, {
+	.cra_name		= "ecb(cast5)",
+	.cra_driver_name	= "ecb-cast5-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= CAST5_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST5_MIN_KEY_SIZE,
+			.max_keysize	= CAST5_MAX_KEY_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "cbc(cast5)",
+	.cra_driver_name	= "cbc-cast5-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= CAST5_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST5_MIN_KEY_SIZE,
+			.max_keysize	= CAST5_MAX_KEY_SIZE,
+			.ivsize		= CAST5_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= __ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "ctr(cast5)",
+	.cra_driver_name	= "ctr-cast5-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST5_MIN_KEY_SIZE,
+			.max_keysize	= CAST5_MAX_KEY_SIZE,
+			.ivsize		= CAST5_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_encrypt,
+			.geniv		= "chainiv",
+		},
+	},
+} };
+
+static int __init cast5_init(void)
+{
+	u64 xcr0;
+
+	if (!cpu_has_avx || !cpu_has_osxsave) {
+		pr_info("AVX instructions are not detected.\n");
+		return -ENODEV;
+	}
+
+	xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
+	if ((xcr0 & (XSTATE_SSE | XSTATE_YMM)) != (XSTATE_SSE | XSTATE_YMM)) {
+		pr_info("AVX detected but unusable.\n");
+		return -ENODEV;
+	}
+
+	return crypto_register_algs(cast5_algs, ARRAY_SIZE(cast5_algs));
+}
+
+static void __exit cast5_exit(void)
+{
+	crypto_unregister_algs(cast5_algs, ARRAY_SIZE(cast5_algs));
+}
+
+module_init(cast5_init);
+module_exit(cast5_exit);
+
+MODULE_DESCRIPTION("Cast5 Cipher Algorithm, AVX optimized");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("cast5");
diff --git a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
new file mode 100644
index 000000000000..218d283772f4
--- /dev/null
+++ b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
@@ -0,0 +1,383 @@
+/*
+ * Cast6 Cipher 8-way parallel algorithm (AVX/x86_64)
+ *
+ * Copyright (C) 2012 Johannes Goetzfried
+ *     <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
+ *
+ * Copyright © 2012 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ * USA
+ *
+ */
+
+.file "cast6-avx-x86_64-asm_64.S"
+
+.extern cast6_s1
+.extern cast6_s2
+.extern cast6_s3
+.extern cast6_s4
+
+/* structure of crypto context */
+#define km	0
+#define kr	(12*4*4)
+
+/* s-boxes */
+#define s1	cast6_s1
+#define s2	cast6_s2
+#define s3	cast6_s3
+#define s4	cast6_s4
+
+/**********************************************************************
+  8-way AVX cast6
+ **********************************************************************/
+#define CTX %rdi
+
+#define RA1 %xmm0
+#define RB1 %xmm1
+#define RC1 %xmm2
+#define RD1 %xmm3
+
+#define RA2 %xmm4
+#define RB2 %xmm5
+#define RC2 %xmm6
+#define RD2 %xmm7
+
+#define RX  %xmm8
+
+#define RKM  %xmm9
+#define RKR  %xmm10
+#define RKRF %xmm11
+#define RKRR %xmm12
+#define R32  %xmm13
+#define R1ST %xmm14
+
+#define RTMP %xmm15
+
+#define RID1  %rbp
+#define RID1d %ebp
+#define RID2  %rsi
+#define RID2d %esi
+
+#define RGI1   %rdx
+#define RGI1bl %dl
+#define RGI1bh %dh
+#define RGI2   %rcx
+#define RGI2bl %cl
+#define RGI2bh %ch
+
+#define RGI3   %rax
+#define RGI3bl %al
+#define RGI3bh %ah
+#define RGI4   %rbx
+#define RGI4bl %bl
+#define RGI4bh %bh
+
+#define RFS1  %r8
+#define RFS1d %r8d
+#define RFS2  %r9
+#define RFS2d %r9d
+#define RFS3  %r10
+#define RFS3d %r10d
+
+
+#define lookup_32bit(src, dst, op1, op2, op3, interleave_op, il_reg) \
+	movzbl		src ## bh,     RID1d;    \
+	movzbl		src ## bl,     RID2d;    \
+	shrq $16,	src;                     \
+	movl		s1(, RID1, 4), dst ## d; \
+	op1		s2(, RID2, 4), dst ## d; \
+	movzbl		src ## bh,     RID1d;    \
+	movzbl		src ## bl,     RID2d;    \
+	interleave_op(il_reg);			 \
+	op2		s3(, RID1, 4), dst ## d; \
+	op3		s4(, RID2, 4), dst ## d;
+
+#define dummy(d) /* do nothing */
+
+#define shr_next(reg) \
+	shrq $16,	reg;
+
+#define F_head(a, x, gi1, gi2, op0) \
+	op0	a,	RKM,  x;                 \
+	vpslld	RKRF,	x,    RTMP;              \
+	vpsrld	RKRR,	x,    x;                 \
+	vpor	RTMP,	x,    x;                 \
+	\
+	vmovq		x,    gi1;               \
+	vpextrq $1,	x,    gi2;
+
+#define F_tail(a, x, gi1, gi2, op1, op2, op3) \
+	lookup_32bit(##gi1, RFS1, op1, op2, op3, shr_next, ##gi1); \
+	lookup_32bit(##gi2, RFS3, op1, op2, op3, shr_next, ##gi2); \
+	\
+	lookup_32bit(##gi1, RFS2, op1, op2, op3, dummy, none);     \
+	shlq $32,	RFS2;                                      \
+	orq		RFS1, RFS2;                                \
+	lookup_32bit(##gi2, RFS1, op1, op2, op3, dummy, none);     \
+	shlq $32,	RFS1;                                      \
+	orq		RFS1, RFS3;                                \
+	\
+	vmovq		RFS2, x;                                   \
+	vpinsrq $1,	RFS3, x, x;
+
+#define F_2(a1, b1, a2, b2, op0, op1, op2, op3) \
+	F_head(b1, RX, RGI1, RGI2, op0);              \
+	F_head(b2, RX, RGI3, RGI4, op0);              \
+	\
+	F_tail(b1, RX, RGI1, RGI2, op1, op2, op3);    \
+	F_tail(b2, RTMP, RGI3, RGI4, op1, op2, op3);  \
+	\
+	vpxor		a1, RX,   a1;                 \
+	vpxor		a2, RTMP, a2;
+
+#define F1_2(a1, b1, a2, b2) \
+	F_2(a1, b1, a2, b2, vpaddd, xorl, subl, addl)
+#define F2_2(a1, b1, a2, b2) \
+	F_2(a1, b1, a2, b2, vpxor, subl, addl, xorl)
+#define F3_2(a1, b1, a2, b2) \
+	F_2(a1, b1, a2, b2, vpsubd, addl, xorl, subl)
+
+#define qop(in, out, f) \
+	F ## f ## _2(out ## 1, in ## 1, out ## 2, in ## 2);
+
+#define get_round_keys(nn) \
+	vbroadcastss	(km+(4*(nn)))(CTX), RKM;        \
+	vpand		R1ST,               RKR,  RKRF; \
+	vpsubq		RKRF,               R32,  RKRR; \
+	vpsrldq $1,	RKR,                RKR;
+
+#define Q(n) \
+	get_round_keys(4*n+0); \
+	qop(RD, RC, 1);        \
+	\
+	get_round_keys(4*n+1); \
+	qop(RC, RB, 2);        \
+	\
+	get_round_keys(4*n+2); \
+	qop(RB, RA, 3);        \
+	\
+	get_round_keys(4*n+3); \
+	qop(RA, RD, 1);
+
+#define QBAR(n) \
+	get_round_keys(4*n+3); \
+	qop(RA, RD, 1);        \
+	\
+	get_round_keys(4*n+2); \
+	qop(RB, RA, 3);        \
+	\
+	get_round_keys(4*n+1); \
+	qop(RC, RB, 2);        \
+	\
+	get_round_keys(4*n+0); \
+	qop(RD, RC, 1);
+
+#define shuffle(mask) \
+	vpshufb		mask,            RKR, RKR;
+
+#define preload_rkr(n, do_mask, mask) \
+	vbroadcastss	.L16_mask,                RKR;      \
+	/* add 16-bit rotation to key rotations (mod 32) */ \
+	vpxor		(kr+n*16)(CTX),           RKR, RKR; \
+	do_mask(mask);
+
+#define transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \
+	vpunpckldq		x1, x0, t0; \
+	vpunpckhdq		x1, x0, t2; \
+	vpunpckldq		x3, x2, t1; \
+	vpunpckhdq		x3, x2, x3; \
+	\
+	vpunpcklqdq		t1, t0, x0; \
+	vpunpckhqdq		t1, t0, x1; \
+	vpunpcklqdq		x3, t2, x2; \
+	vpunpckhqdq		x3, t2, x3;
+
+#define inpack_blocks(in, x0, x1, x2, x3, t0, t1, t2, rmask) \
+	vmovdqu (0*4*4)(in),	x0; \
+	vmovdqu (1*4*4)(in),	x1; \
+	vmovdqu (2*4*4)(in),	x2; \
+	vmovdqu (3*4*4)(in),	x3; \
+	vpshufb rmask, x0,	x0; \
+	vpshufb rmask, x1,	x1; \
+	vpshufb rmask, x2,	x2; \
+	vpshufb rmask, x3,	x3; \
+	\
+	transpose_4x4(x0, x1, x2, x3, t0, t1, t2)
+
+#define outunpack_blocks(out, x0, x1, x2, x3, t0, t1, t2, rmask) \
+	transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \
+	\
+	vpshufb rmask,		x0, x0;       \
+	vpshufb rmask,		x1, x1;       \
+	vpshufb rmask,		x2, x2;       \
+	vpshufb rmask,		x3, x3;       \
+	vmovdqu x0,		(0*4*4)(out); \
+	vmovdqu	x1,		(1*4*4)(out); \
+	vmovdqu	x2,		(2*4*4)(out); \
+	vmovdqu	x3,		(3*4*4)(out);
+
+#define outunpack_xor_blocks(out, x0, x1, x2, x3, t0, t1, t2, rmask) \
+	transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \
+	\
+	vpshufb rmask,		x0, x0;       \
+	vpshufb rmask,		x1, x1;       \
+	vpshufb rmask,		x2, x2;       \
+	vpshufb rmask,		x3, x3;       \
+	vpxor (0*4*4)(out),	x0, x0;       \
+	vmovdqu	x0,		(0*4*4)(out); \
+	vpxor (1*4*4)(out),	x1, x1;       \
+	vmovdqu	x1,		(1*4*4)(out); \
+	vpxor (2*4*4)(out),	x2, x2;       \
+	vmovdqu x2,		(2*4*4)(out); \
+	vpxor (3*4*4)(out),	x3, x3;       \
+	vmovdqu x3,		(3*4*4)(out);
+
+.data
+
+.align 16
+.Lbswap_mask:
+	.byte 3, 2, 1, 0, 7, 6, 5, 4, 11, 10, 9, 8, 15, 14, 13, 12
+.Lrkr_enc_Q_Q_QBAR_QBAR:
+	.byte 0, 1, 2, 3, 4, 5, 6, 7, 11, 10, 9, 8, 15, 14, 13, 12
+.Lrkr_enc_QBAR_QBAR_QBAR_QBAR:
+	.byte 3, 2, 1, 0, 7, 6, 5, 4, 11, 10, 9, 8, 15, 14, 13, 12
+.Lrkr_dec_Q_Q_Q_Q:
+	.byte 12, 13, 14, 15, 8, 9, 10, 11, 4, 5, 6, 7, 0, 1, 2, 3
+.Lrkr_dec_Q_Q_QBAR_QBAR:
+	.byte 12, 13, 14, 15, 8, 9, 10, 11, 7, 6, 5, 4, 3, 2, 1, 0
+.Lrkr_dec_QBAR_QBAR_QBAR_QBAR:
+	.byte 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
+.L16_mask:
+	.byte 16, 16, 16, 16
+.L32_mask:
+	.byte 32, 0, 0, 0
+.Lfirst_mask:
+	.byte 0x1f, 0, 0, 0
+
+.text
+
+.align 16
+.global __cast6_enc_blk_8way
+.type   __cast6_enc_blk_8way,@function;
+
+__cast6_enc_blk_8way:
+	/* input:
+	 *	%rdi: ctx, CTX
+	 *	%rsi: dst
+	 *	%rdx: src
+	 *	%rcx: bool, if true: xor output
+	 */
+
+	pushq %rbp;
+	pushq %rbx;
+	pushq %rcx;
+
+	vmovdqa .Lbswap_mask, RKM;
+	vmovd .Lfirst_mask, R1ST;
+	vmovd .L32_mask, R32;
+
+	leaq (4*4*4)(%rdx), %rax;
+	inpack_blocks(%rdx, RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
+	inpack_blocks(%rax, RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
+
+	movq %rsi, %r11;
+
+	preload_rkr(0, dummy, none);
+	Q(0);
+	Q(1);
+	Q(2);
+	Q(3);
+	preload_rkr(1, shuffle, .Lrkr_enc_Q_Q_QBAR_QBAR);
+	Q(4);
+	Q(5);
+	QBAR(6);
+	QBAR(7);
+	preload_rkr(2, shuffle, .Lrkr_enc_QBAR_QBAR_QBAR_QBAR);
+	QBAR(8);
+	QBAR(9);
+	QBAR(10);
+	QBAR(11);
+
+	popq %rcx;
+	popq %rbx;
+	popq %rbp;
+
+	vmovdqa .Lbswap_mask, RKM;
+	leaq (4*4*4)(%r11), %rax;
+
+	testb %cl, %cl;
+	jnz __enc_xor8;
+
+	outunpack_blocks(%r11, RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
+	outunpack_blocks(%rax, RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
+
+	ret;
+
+__enc_xor8:
+	outunpack_xor_blocks(%r11, RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
+	outunpack_xor_blocks(%rax, RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
+
+	ret;
+
+.align 16
+.global cast6_dec_blk_8way
+.type   cast6_dec_blk_8way,@function;
+
+cast6_dec_blk_8way:
+	/* input:
+	 *	%rdi: ctx, CTX
+	 *	%rsi: dst
+	 *	%rdx: src
+	 */
+
+	pushq %rbp;
+	pushq %rbx;
+
+	vmovdqa .Lbswap_mask, RKM;
+	vmovd .Lfirst_mask, R1ST;
+	vmovd .L32_mask, R32;
+
+	leaq (4*4*4)(%rdx), %rax;
+	inpack_blocks(%rdx, RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
+	inpack_blocks(%rax, RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
+
+	movq %rsi, %r11;
+
+	preload_rkr(2, shuffle, .Lrkr_dec_Q_Q_Q_Q);
+	Q(11);
+	Q(10);
+	Q(9);
+	Q(8);
+	preload_rkr(1, shuffle, .Lrkr_dec_Q_Q_QBAR_QBAR);
+	Q(7);
+	Q(6);
+	QBAR(5);
+	QBAR(4);
+	preload_rkr(0, shuffle, .Lrkr_dec_QBAR_QBAR_QBAR_QBAR);
+	QBAR(3);
+	QBAR(2);
+	QBAR(1);
+	QBAR(0);
+
+	popq %rbx;
+	popq %rbp;
+
+	vmovdqa .Lbswap_mask, RKM;
+	leaq (4*4*4)(%r11), %rax;
+	outunpack_blocks(%r11, RA1, RB1, RC1, RD1, RTMP, RX, RKRF, RKM);
+	outunpack_blocks(%rax, RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
+
+	ret;
diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c
new file mode 100644
index 000000000000..15e5f85a5011
--- /dev/null
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -0,0 +1,648 @@
+/*
+ * Glue Code for the AVX assembler implemention of the Cast6 Cipher
+ *
+ * Copyright (C) 2012 Johannes Goetzfried
+ *     <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/hardirq.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/err.h>
+#include <crypto/algapi.h>
+#include <crypto/cast6.h>
+#include <crypto/cryptd.h>
+#include <crypto/b128ops.h>
+#include <crypto/ctr.h>
+#include <crypto/lrw.h>
+#include <crypto/xts.h>
+#include <asm/xcr.h>
+#include <asm/xsave.h>
+#include <asm/crypto/ablk_helper.h>
+#include <asm/crypto/glue_helper.h>
+
+#define CAST6_PARALLEL_BLOCKS 8
+
+asmlinkage void __cast6_enc_blk_8way(struct cast6_ctx *ctx, u8 *dst,
+				     const u8 *src, bool xor);
+asmlinkage void cast6_dec_blk_8way(struct cast6_ctx *ctx, u8 *dst,
+				   const u8 *src);
+
+static inline void cast6_enc_blk_xway(struct cast6_ctx *ctx, u8 *dst,
+				      const u8 *src)
+{
+	__cast6_enc_blk_8way(ctx, dst, src, false);
+}
+
+static inline void cast6_enc_blk_xway_xor(struct cast6_ctx *ctx, u8 *dst,
+					  const u8 *src)
+{
+	__cast6_enc_blk_8way(ctx, dst, src, true);
+}
+
+static inline void cast6_dec_blk_xway(struct cast6_ctx *ctx, u8 *dst,
+				      const u8 *src)
+{
+	cast6_dec_blk_8way(ctx, dst, src);
+}
+
+
+static void cast6_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src)
+{
+	u128 ivs[CAST6_PARALLEL_BLOCKS - 1];
+	unsigned int j;
+
+	for (j = 0; j < CAST6_PARALLEL_BLOCKS - 1; j++)
+		ivs[j] = src[j];
+
+	cast6_dec_blk_xway(ctx, (u8 *)dst, (u8 *)src);
+
+	for (j = 0; j < CAST6_PARALLEL_BLOCKS - 1; j++)
+		u128_xor(dst + (j + 1), dst + (j + 1), ivs + j);
+}
+
+static void cast6_crypt_ctr(void *ctx, u128 *dst, const u128 *src, u128 *iv)
+{
+	be128 ctrblk;
+
+	u128_to_be128(&ctrblk, iv);
+	u128_inc(iv);
+
+	__cast6_encrypt(ctx, (u8 *)&ctrblk, (u8 *)&ctrblk);
+	u128_xor(dst, src, (u128 *)&ctrblk);
+}
+
+static void cast6_crypt_ctr_xway(void *ctx, u128 *dst, const u128 *src,
+				   u128 *iv)
+{
+	be128 ctrblks[CAST6_PARALLEL_BLOCKS];
+	unsigned int i;
+
+	for (i = 0; i < CAST6_PARALLEL_BLOCKS; i++) {
+		if (dst != src)
+			dst[i] = src[i];
+
+		u128_to_be128(&ctrblks[i], iv);
+		u128_inc(iv);
+	}
+
+	cast6_enc_blk_xway_xor(ctx, (u8 *)dst, (u8 *)ctrblks);
+}
+
+static const struct common_glue_ctx cast6_enc = {
+	.num_funcs = 2,
+	.fpu_blocks_limit = CAST6_PARALLEL_BLOCKS,
+
+	.funcs = { {
+		.num_blocks = CAST6_PARALLEL_BLOCKS,
+		.fn_u = { .ecb = GLUE_FUNC_CAST(cast6_enc_blk_xway) }
+	}, {
+		.num_blocks = 1,
+		.fn_u = { .ecb = GLUE_FUNC_CAST(__cast6_encrypt) }
+	} }
+};
+
+static const struct common_glue_ctx cast6_ctr = {
+	.num_funcs = 2,
+	.fpu_blocks_limit = CAST6_PARALLEL_BLOCKS,
+
+	.funcs = { {
+		.num_blocks = CAST6_PARALLEL_BLOCKS,
+		.fn_u = { .ctr = GLUE_CTR_FUNC_CAST(cast6_crypt_ctr_xway) }
+	}, {
+		.num_blocks = 1,
+		.fn_u = { .ctr = GLUE_CTR_FUNC_CAST(cast6_crypt_ctr) }
+	} }
+};
+
+static const struct common_glue_ctx cast6_dec = {
+	.num_funcs = 2,
+	.fpu_blocks_limit = CAST6_PARALLEL_BLOCKS,
+
+	.funcs = { {
+		.num_blocks = CAST6_PARALLEL_BLOCKS,
+		.fn_u = { .ecb = GLUE_FUNC_CAST(cast6_dec_blk_xway) }
+	}, {
+		.num_blocks = 1,
+		.fn_u = { .ecb = GLUE_FUNC_CAST(__cast6_decrypt) }
+	} }
+};
+
+static const struct common_glue_ctx cast6_dec_cbc = {
+	.num_funcs = 2,
+	.fpu_blocks_limit = CAST6_PARALLEL_BLOCKS,
+
+	.funcs = { {
+		.num_blocks = CAST6_PARALLEL_BLOCKS,
+		.fn_u = { .cbc = GLUE_CBC_FUNC_CAST(cast6_decrypt_cbc_xway) }
+	}, {
+		.num_blocks = 1,
+		.fn_u = { .cbc = GLUE_CBC_FUNC_CAST(__cast6_decrypt) }
+	} }
+};
+
+static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	return glue_ecb_crypt_128bit(&cast6_enc, desc, dst, src, nbytes);
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	return glue_ecb_crypt_128bit(&cast6_dec, desc, dst, src, nbytes);
+}
+
+static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	return glue_cbc_encrypt_128bit(GLUE_FUNC_CAST(__cast6_encrypt), desc,
+				       dst, src, nbytes);
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	return glue_cbc_decrypt_128bit(&cast6_dec_cbc, desc, dst, src,
+				       nbytes);
+}
+
+static int ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		     struct scatterlist *src, unsigned int nbytes)
+{
+	return glue_ctr_crypt_128bit(&cast6_ctr, desc, dst, src, nbytes);
+}
+
+static inline bool cast6_fpu_begin(bool fpu_enabled, unsigned int nbytes)
+{
+	return glue_fpu_begin(CAST6_BLOCK_SIZE, CAST6_PARALLEL_BLOCKS,
+			      NULL, fpu_enabled, nbytes);
+}
+
+static inline void cast6_fpu_end(bool fpu_enabled)
+{
+	glue_fpu_end(fpu_enabled);
+}
+
+struct crypt_priv {
+	struct cast6_ctx *ctx;
+	bool fpu_enabled;
+};
+
+static void encrypt_callback(void *priv, u8 *srcdst, unsigned int nbytes)
+{
+	const unsigned int bsize = CAST6_BLOCK_SIZE;
+	struct crypt_priv *ctx = priv;
+	int i;
+
+	ctx->fpu_enabled = cast6_fpu_begin(ctx->fpu_enabled, nbytes);
+
+	if (nbytes == bsize * CAST6_PARALLEL_BLOCKS) {
+		cast6_enc_blk_xway(ctx->ctx, srcdst, srcdst);
+		return;
+	}
+
+	for (i = 0; i < nbytes / bsize; i++, srcdst += bsize)
+		__cast6_encrypt(ctx->ctx, srcdst, srcdst);
+}
+
+static void decrypt_callback(void *priv, u8 *srcdst, unsigned int nbytes)
+{
+	const unsigned int bsize = CAST6_BLOCK_SIZE;
+	struct crypt_priv *ctx = priv;
+	int i;
+
+	ctx->fpu_enabled = cast6_fpu_begin(ctx->fpu_enabled, nbytes);
+
+	if (nbytes == bsize * CAST6_PARALLEL_BLOCKS) {
+		cast6_dec_blk_xway(ctx->ctx, srcdst, srcdst);
+		return;
+	}
+
+	for (i = 0; i < nbytes / bsize; i++, srcdst += bsize)
+		__cast6_decrypt(ctx->ctx, srcdst, srcdst);
+}
+
+struct cast6_lrw_ctx {
+	struct lrw_table_ctx lrw_table;
+	struct cast6_ctx cast6_ctx;
+};
+
+static int lrw_cast6_setkey(struct crypto_tfm *tfm, const u8 *key,
+			      unsigned int keylen)
+{
+	struct cast6_lrw_ctx *ctx = crypto_tfm_ctx(tfm);
+	int err;
+
+	err = __cast6_setkey(&ctx->cast6_ctx, key, keylen - CAST6_BLOCK_SIZE,
+			     &tfm->crt_flags);
+	if (err)
+		return err;
+
+	return lrw_init_table(&ctx->lrw_table, key + keylen - CAST6_BLOCK_SIZE);
+}
+
+static int lrw_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct cast6_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[CAST6_PARALLEL_BLOCKS];
+	struct crypt_priv crypt_ctx = {
+		.ctx = &ctx->cast6_ctx,
+		.fpu_enabled = false,
+	};
+	struct lrw_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.table_ctx = &ctx->lrw_table,
+		.crypt_ctx = &crypt_ctx,
+		.crypt_fn = encrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+	ret = lrw_crypt(desc, dst, src, nbytes, &req);
+	cast6_fpu_end(crypt_ctx.fpu_enabled);
+
+	return ret;
+}
+
+static int lrw_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct cast6_lrw_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[CAST6_PARALLEL_BLOCKS];
+	struct crypt_priv crypt_ctx = {
+		.ctx = &ctx->cast6_ctx,
+		.fpu_enabled = false,
+	};
+	struct lrw_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.table_ctx = &ctx->lrw_table,
+		.crypt_ctx = &crypt_ctx,
+		.crypt_fn = decrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+	ret = lrw_crypt(desc, dst, src, nbytes, &req);
+	cast6_fpu_end(crypt_ctx.fpu_enabled);
+
+	return ret;
+}
+
+static void lrw_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct cast6_lrw_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	lrw_free_table(&ctx->lrw_table);
+}
+
+struct cast6_xts_ctx {
+	struct cast6_ctx tweak_ctx;
+	struct cast6_ctx crypt_ctx;
+};
+
+static int xts_cast6_setkey(struct crypto_tfm *tfm, const u8 *key,
+			      unsigned int keylen)
+{
+	struct cast6_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+	u32 *flags = &tfm->crt_flags;
+	int err;
+
+	/* key consists of keys of equal size concatenated, therefore
+	 * the length must be even
+	 */
+	if (keylen % 2) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	/* first half of xts-key is for crypt */
+	err = __cast6_setkey(&ctx->crypt_ctx, key, keylen / 2, flags);
+	if (err)
+		return err;
+
+	/* second half of xts-key is for tweak */
+	return __cast6_setkey(&ctx->tweak_ctx, key + keylen / 2, keylen / 2,
+			      flags);
+}
+
+static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct cast6_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[CAST6_PARALLEL_BLOCKS];
+	struct crypt_priv crypt_ctx = {
+		.ctx = &ctx->crypt_ctx,
+		.fpu_enabled = false,
+	};
+	struct xts_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.tweak_ctx = &ctx->tweak_ctx,
+		.tweak_fn = XTS_TWEAK_CAST(__cast6_encrypt),
+		.crypt_ctx = &crypt_ctx,
+		.crypt_fn = encrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+	ret = xts_crypt(desc, dst, src, nbytes, &req);
+	cast6_fpu_end(crypt_ctx.fpu_enabled);
+
+	return ret;
+}
+
+static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes)
+{
+	struct cast6_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	be128 buf[CAST6_PARALLEL_BLOCKS];
+	struct crypt_priv crypt_ctx = {
+		.ctx = &ctx->crypt_ctx,
+		.fpu_enabled = false,
+	};
+	struct xts_crypt_req req = {
+		.tbuf = buf,
+		.tbuflen = sizeof(buf),
+
+		.tweak_ctx = &ctx->tweak_ctx,
+		.tweak_fn = XTS_TWEAK_CAST(__cast6_encrypt),
+		.crypt_ctx = &crypt_ctx,
+		.crypt_fn = decrypt_callback,
+	};
+	int ret;
+
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+	ret = xts_crypt(desc, dst, src, nbytes, &req);
+	cast6_fpu_end(crypt_ctx.fpu_enabled);
+
+	return ret;
+}
+
+static struct crypto_alg cast6_algs[10] = { {
+	.cra_name		= "__ecb-cast6-avx",
+	.cra_driver_name	= "__driver-ecb-cast6-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct cast6_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE,
+			.setkey		= cast6_setkey,
+			.encrypt	= ecb_encrypt,
+			.decrypt	= ecb_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "__cbc-cast6-avx",
+	.cra_driver_name	= "__driver-cbc-cast6-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct cast6_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE,
+			.setkey		= cast6_setkey,
+			.encrypt	= cbc_encrypt,
+			.decrypt	= cbc_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "__ctr-cast6-avx",
+	.cra_driver_name	= "__driver-ctr-cast6-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct cast6_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= cast6_setkey,
+			.encrypt	= ctr_crypt,
+			.decrypt	= ctr_crypt,
+		},
+	},
+}, {
+	.cra_name		= "__lrw-cast6-avx",
+	.cra_driver_name	= "__driver-lrw-cast6-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct cast6_lrw_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_exit		= lrw_exit_tfm,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE +
+					  CAST6_BLOCK_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE +
+					  CAST6_BLOCK_SIZE,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= lrw_cast6_setkey,
+			.encrypt	= lrw_encrypt,
+			.decrypt	= lrw_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "__xts-cast6-avx",
+	.cra_driver_name	= "__driver-xts-cast6-avx",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct cast6_xts_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE * 2,
+			.max_keysize	= CAST6_MAX_KEY_SIZE * 2,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= xts_cast6_setkey,
+			.encrypt	= xts_encrypt,
+			.decrypt	= xts_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "ecb(cast6)",
+	.cra_driver_name	= "ecb-cast6-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "cbc(cast6)",
+	.cra_driver_name	= "cbc-cast6-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= __ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "ctr(cast6)",
+	.cra_driver_name	= "ctr-cast6-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_encrypt,
+			.geniv		= "chainiv",
+		},
+	},
+}, {
+	.cra_name		= "lrw(cast6)",
+	.cra_driver_name	= "lrw-cast6-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE +
+					  CAST6_BLOCK_SIZE,
+			.max_keysize	= CAST6_MAX_KEY_SIZE +
+					  CAST6_BLOCK_SIZE,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+}, {
+	.cra_name		= "xts(cast6)",
+	.cra_driver_name	= "xts-cast6-avx",
+	.cra_priority		= 200,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= CAST6_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_helper_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_init		= ablk_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= CAST6_MIN_KEY_SIZE * 2,
+			.max_keysize	= CAST6_MAX_KEY_SIZE * 2,
+			.ivsize		= CAST6_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+} };
+
+static int __init cast6_init(void)
+{
+	u64 xcr0;
+
+	if (!cpu_has_avx || !cpu_has_osxsave) {
+		pr_info("AVX instructions are not detected.\n");
+		return -ENODEV;
+	}
+
+	xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
+	if ((xcr0 & (XSTATE_SSE | XSTATE_YMM)) != (XSTATE_SSE | XSTATE_YMM)) {
+		pr_info("AVX detected but unusable.\n");
+		return -ENODEV;
+	}
+
+	return crypto_register_algs(cast6_algs, ARRAY_SIZE(cast6_algs));
+}
+
+static void __exit cast6_exit(void)
+{
+	crypto_unregister_algs(cast6_algs, ARRAY_SIZE(cast6_algs));
+}
+
+module_init(cast6_init);
+module_exit(cast6_exit);
+
+MODULE_DESCRIPTION("Cast6 Cipher Algorithm, AVX optimized");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("cast6");
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index b4bf0a63b520..6759dd1135be 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -150,7 +150,6 @@ static struct shash_alg ghash_alg = {
 		.cra_blocksize		= GHASH_BLOCK_SIZE,
 		.cra_ctxsize		= sizeof(struct ghash_ctx),
 		.cra_module		= THIS_MODULE,
-		.cra_list		= LIST_HEAD_INIT(ghash_alg.base.cra_list),
 	},
 };
 
@@ -288,7 +287,6 @@ static struct ahash_alg ghash_async_alg = {
 			.cra_blocksize		= GHASH_BLOCK_SIZE,
 			.cra_type		= &crypto_ahash_type,
 			.cra_module		= THIS_MODULE,
-			.cra_list		= LIST_HEAD_INIT(ghash_async_alg.halg.base.cra_list),
 			.cra_init		= ghash_async_init_tfm,
 			.cra_exit		= ghash_async_exit_tfm,
 		},
diff --git a/arch/x86/crypto/glue_helper.c b/arch/x86/crypto/glue_helper.c
index 4854f0f31e4f..30b3927bd733 100644
--- a/arch/x86/crypto/glue_helper.c
+++ b/arch/x86/crypto/glue_helper.c
@@ -110,7 +110,7 @@ static unsigned int __glue_cbc_encrypt_128bit(const common_glue_func_t fn,
 		nbytes -= bsize;
 	} while (nbytes >= bsize);
 
-	u128_xor((u128 *)walk->iv, (u128 *)walk->iv, iv);
+	*(u128 *)walk->iv = *iv;
 	return nbytes;
 }
 
diff --git a/arch/x86/crypto/salsa20_glue.c b/arch/x86/crypto/salsa20_glue.c
index bccb76d80987..a3a3c0205c16 100644
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -97,7 +97,6 @@ static struct crypto_alg alg = {
 	.cra_ctxsize        =   sizeof(struct salsa20_ctx),
 	.cra_alignmask      =	3,
 	.cra_module         =   THIS_MODULE,
-	.cra_list           =   LIST_HEAD_INIT(alg.cra_list),
 	.cra_u              =   {
 		.blkcipher = {
 			.setkey         =   setkey,
diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c
index b36bdac237eb..3f543a04cf1e 100644
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -390,7 +390,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[0].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE,
@@ -410,7 +409,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[1].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE,
@@ -430,7 +428,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[2].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE,
@@ -451,7 +448,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[3].cra_list),
 	.cra_exit		= lrw_exit_tfm,
 	.cra_u = {
 		.blkcipher = {
@@ -475,7 +471,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[4].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE * 2,
@@ -496,7 +491,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[5].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -518,7 +512,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[6].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -541,7 +534,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[7].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -565,7 +557,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[8].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -590,7 +581,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[9].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c
index d679c8675f4a..9107a9908c41 100644
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -393,7 +393,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[0].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE,
@@ -413,7 +412,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[1].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE,
@@ -433,7 +431,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[2].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE,
@@ -454,7 +451,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[3].cra_list),
 	.cra_exit		= lrw_exit_tfm,
 	.cra_u = {
 		.blkcipher = {
@@ -478,7 +474,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[4].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= SERPENT_MIN_KEY_SIZE * 2,
@@ -499,7 +494,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[5].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -521,7 +515,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[6].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -544,7 +537,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[7].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -568,7 +560,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[8].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -593,7 +584,6 @@ static struct crypto_alg serpent_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(serpent_algs[9].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
diff --git a/arch/x86/crypto/twofish-avx-x86_64-asm_64.S b/arch/x86/crypto/twofish-avx-x86_64-asm_64.S
index 35f45574390d..1585abb13dde 100644
--- a/arch/x86/crypto/twofish-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-avx-x86_64-asm_64.S
@@ -4,6 +4,8 @@
  * Copyright (C) 2012 Johannes Goetzfried
  *     <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
  *
+ * Copyright © 2012 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -47,16 +49,22 @@
 #define RC2 %xmm6
 #define RD2 %xmm7
 
-#define RX %xmm8
-#define RY %xmm9
+#define RX0 %xmm8
+#define RY0 %xmm9
+
+#define RX1 %xmm10
+#define RY1 %xmm11
 
-#define RK1 %xmm10
-#define RK2 %xmm11
+#define RK1 %xmm12
+#define RK2 %xmm13
 
-#define RID1  %rax
-#define RID1b %al
-#define RID2  %rbx
-#define RID2b %bl
+#define RT %xmm14
+#define RR %xmm15
+
+#define RID1  %rbp
+#define RID1d %ebp
+#define RID2  %rsi
+#define RID2d %esi
 
 #define RGI1   %rdx
 #define RGI1bl %dl
@@ -65,6 +73,13 @@
 #define RGI2bl %cl
 #define RGI2bh %ch
 
+#define RGI3   %rax
+#define RGI3bl %al
+#define RGI3bh %ah
+#define RGI4   %rbx
+#define RGI4bl %bl
+#define RGI4bh %bh
+
 #define RGS1  %r8
 #define RGS1d %r8d
 #define RGS2  %r9
@@ -73,89 +88,123 @@
 #define RGS3d %r10d
 
 
-#define lookup_32bit(t0, t1, t2, t3, src, dst) \
-	movb		src ## bl,        RID1b;     \
-	movb		src ## bh,        RID2b;     \
-	movl		t0(CTX, RID1, 4), dst ## d;  \
-	xorl		t1(CTX, RID2, 4), dst ## d;  \
+#define lookup_32bit(t0, t1, t2, t3, src, dst, interleave_op, il_reg) \
+	movzbl		src ## bl,        RID1d;     \
+	movzbl		src ## bh,        RID2d;     \
 	shrq $16,	src;                         \
-	movb		src ## bl,        RID1b;     \
-	movb		src ## bh,        RID2b;     \
+	movl		t0(CTX, RID1, 4), dst ## d;  \
+	movl		t1(CTX, RID2, 4), RID2d;     \
+	movzbl		src ## bl,        RID1d;     \
+	xorl		RID2d,            dst ## d;  \
+	movzbl		src ## bh,        RID2d;     \
+	interleave_op(il_reg);			     \
 	xorl		t2(CTX, RID1, 4), dst ## d;  \
 	xorl		t3(CTX, RID2, 4), dst ## d;
 
-#define G(a, x, t0, t1, t2, t3) \
-	vmovq		a,    RGI1;               \
-	vpsrldq $8,	a,    x;                  \
-	vmovq		x,    RGI2;               \
+#define dummy(d) /* do nothing */
+
+#define shr_next(reg) \
+	shrq $16,	reg;
+
+#define G(gi1, gi2, x, t0, t1, t2, t3) \
+	lookup_32bit(t0, t1, t2, t3, ##gi1, RGS1, shr_next, ##gi1);  \
+	lookup_32bit(t0, t1, t2, t3, ##gi2, RGS3, shr_next, ##gi2);  \
+	\
+	lookup_32bit(t0, t1, t2, t3, ##gi1, RGS2, dummy, none);      \
+	shlq $32,	RGS2;                                        \
+	orq		RGS1, RGS2;                                  \
+	lookup_32bit(t0, t1, t2, t3, ##gi2, RGS1, dummy, none);      \
+	shlq $32,	RGS1;                                        \
+	orq		RGS1, RGS3;
+
+#define round_head_2(a, b, x1, y1, x2, y2) \
+	vmovq		b ## 1, RGI3;           \
+	vpextrq $1,	b ## 1, RGI4;           \
 	\
-	lookup_32bit(t0, t1, t2, t3, RGI1, RGS1); \
-	shrq $16,	RGI1;                     \
-	lookup_32bit(t0, t1, t2, t3, RGI1, RGS2); \
-	shlq $32,	RGS2;                     \
-	orq		RGS1, RGS2;               \
+	G(RGI1, RGI2, x1, s0, s1, s2, s3);      \
+	vmovq		a ## 2, RGI1;           \
+	vpextrq $1,	a ## 2, RGI2;           \
+	vmovq		RGS2, x1;               \
+	vpinsrq $1,	RGS3, x1, x1;           \
 	\
-	lookup_32bit(t0, t1, t2, t3, RGI2, RGS1); \
-	shrq $16,	RGI2;                     \
-	lookup_32bit(t0, t1, t2, t3, RGI2, RGS3); \
-	shlq $32,	RGS3;                     \
-	orq		RGS1, RGS3;               \
+	G(RGI3, RGI4, y1, s1, s2, s3, s0);      \
+	vmovq		b ## 2, RGI3;           \
+	vpextrq $1,	b ## 2, RGI4;           \
+	vmovq		RGS2, y1;               \
+	vpinsrq $1,	RGS3, y1, y1;           \
 	\
-	vmovq		RGS2, x;                  \
-	vpinsrq $1,	RGS3, x, x;
+	G(RGI1, RGI2, x2, s0, s1, s2, s3);      \
+	vmovq		RGS2, x2;               \
+	vpinsrq $1,	RGS3, x2, x2;           \
+	\
+	G(RGI3, RGI4, y2, s1, s2, s3, s0);      \
+	vmovq		RGS2, y2;               \
+	vpinsrq $1,	RGS3, y2, y2;
 
-#define encround(a, b, c, d, x, y) \
-	G(a, x, s0, s1, s2, s3);           \
-	G(b, y, s1, s2, s3, s0);           \
+#define encround_tail(a, b, c, d, x, y, prerotate) \
 	vpaddd			x, y,   x; \
+	vpaddd			x, RK1, RT;\
+	prerotate(b);			   \
+	vpxor			RT, c,  c; \
 	vpaddd			y, x,   y; \
-	vpaddd			x, RK1, x; \
 	vpaddd			y, RK2, y; \
-	vpxor			x, c,   c; \
-	vpsrld $1,		c, x;      \
+	vpsrld $1,		c, RT;     \
 	vpslld $(32 - 1),	c, c;      \
-	vpor			c, x,   c; \
-	vpslld $1,		d, x;      \
-	vpsrld $(32 - 1),	d, d;      \
-	vpor			d, x,   d; \
-	vpxor			d, y,   d;
-
-#define decround(a, b, c, d, x, y) \
-	G(a, x, s0, s1, s2, s3);           \
-	G(b, y, s1, s2, s3, s0);           \
+	vpor			c, RT,  c; \
+	vpxor			d, y,   d; \
+
+#define decround_tail(a, b, c, d, x, y, prerotate) \
 	vpaddd			x, y,   x; \
+	vpaddd			x, RK1, RT;\
+	prerotate(a);			   \
+	vpxor			RT, c,  c; \
 	vpaddd			y, x,   y; \
 	vpaddd			y, RK2, y; \
 	vpxor			d, y,   d; \
 	vpsrld $1,		d, y;      \
 	vpslld $(32 - 1),	d, d;      \
 	vpor			d, y,   d; \
-	vpslld $1,		c, y;      \
-	vpsrld $(32 - 1),	c, c;      \
-	vpor			c, y,   c; \
-	vpaddd			x, RK1, x; \
-	vpxor			x, c,   c;
-
-#define encrypt_round(n, a, b, c, d) \
-	vbroadcastss (k+4*(2*(n)))(CTX),   RK1;           \
-	vbroadcastss (k+4*(2*(n)+1))(CTX), RK2;           \
-	encround(a ## 1, b ## 1, c ## 1, d ## 1, RX, RY); \
-	encround(a ## 2, b ## 2, c ## 2, d ## 2, RX, RY);
-
-#define decrypt_round(n, a, b, c, d) \
-	vbroadcastss (k+4*(2*(n)))(CTX),   RK1;           \
-	vbroadcastss (k+4*(2*(n)+1))(CTX), RK2;           \
-	decround(a ## 1, b ## 1, c ## 1, d ## 1, RX, RY); \
-	decround(a ## 2, b ## 2, c ## 2, d ## 2, RX, RY);
+
+#define rotate_1l(x) \
+	vpslld $1,		x, RR;     \
+	vpsrld $(32 - 1),	x, x;      \
+	vpor			x, RR,  x;
+
+#define preload_rgi(c) \
+	vmovq			c, RGI1; \
+	vpextrq $1,		c, RGI2;
+
+#define encrypt_round(n, a, b, c, d, preload, prerotate) \
+	vbroadcastss (k+4*(2*(n)))(CTX),   RK1;                  \
+	vbroadcastss (k+4*(2*(n)+1))(CTX), RK2;                  \
+	round_head_2(a, b, RX0, RY0, RX1, RY1);                  \
+	encround_tail(a ## 1, b ## 1, c ## 1, d ## 1, RX0, RY0, prerotate); \
+	preload(c ## 1);                                         \
+	encround_tail(a ## 2, b ## 2, c ## 2, d ## 2, RX1, RY1, prerotate);
+
+#define decrypt_round(n, a, b, c, d, preload, prerotate) \
+	vbroadcastss (k+4*(2*(n)))(CTX),   RK1;                  \
+	vbroadcastss (k+4*(2*(n)+1))(CTX), RK2;                  \
+	round_head_2(a, b, RX0, RY0, RX1, RY1);                  \
+	decround_tail(a ## 1, b ## 1, c ## 1, d ## 1, RX0, RY0, prerotate); \
+	preload(c ## 1);                                         \
+	decround_tail(a ## 2, b ## 2, c ## 2, d ## 2, RX1, RY1, prerotate);
 
 #define encrypt_cycle(n) \
-	encrypt_round((2*n), RA, RB, RC, RD);       \
-	encrypt_round(((2*n) + 1), RC, RD, RA, RB);
+	encrypt_round((2*n), RA, RB, RC, RD, preload_rgi, rotate_1l); \
+	encrypt_round(((2*n) + 1), RC, RD, RA, RB, preload_rgi, rotate_1l);
+
+#define encrypt_cycle_last(n) \
+	encrypt_round((2*n), RA, RB, RC, RD, preload_rgi, rotate_1l); \
+	encrypt_round(((2*n) + 1), RC, RD, RA, RB, dummy, dummy);
 
 #define decrypt_cycle(n) \
-	decrypt_round(((2*n) + 1), RC, RD, RA, RB); \
-	decrypt_round((2*n), RA, RB, RC, RD);
+	decrypt_round(((2*n) + 1), RC, RD, RA, RB, preload_rgi, rotate_1l); \
+	decrypt_round((2*n), RA, RB, RC, RD, preload_rgi, rotate_1l);
 
+#define decrypt_cycle_last(n) \
+	decrypt_round(((2*n) + 1), RC, RD, RA, RB, preload_rgi, rotate_1l); \
+	decrypt_round((2*n), RA, RB, RC, RD, dummy, dummy);
 
 #define transpose_4x4(x0, x1, x2, x3, t0, t1, t2) \
 	vpunpckldq		x1, x0, t0; \
@@ -216,17 +265,20 @@ __twofish_enc_blk_8way:
 	 *	%rcx: bool, if true: xor output
 	 */
 
+	pushq %rbp;
 	pushq %rbx;
 	pushq %rcx;
 
 	vmovdqu w(CTX), RK1;
 
 	leaq (4*4*4)(%rdx), %rax;
-	inpack_blocks(%rdx, RA1, RB1, RC1, RD1, RK1, RX, RY, RK2);
-	inpack_blocks(%rax, RA2, RB2, RC2, RD2, RK1, RX, RY, RK2);
+	inpack_blocks(%rdx, RA1, RB1, RC1, RD1, RK1, RX0, RY0, RK2);
+	preload_rgi(RA1);
+	rotate_1l(RD1);
+	inpack_blocks(%rax, RA2, RB2, RC2, RD2, RK1, RX0, RY0, RK2);
+	rotate_1l(RD2);
 
-	xorq RID1, RID1;
-	xorq RID2, RID2;
+	movq %rsi, %r11;
 
 	encrypt_cycle(0);
 	encrypt_cycle(1);
@@ -235,26 +287,27 @@ __twofish_enc_blk_8way:
 	encrypt_cycle(4);
 	encrypt_cycle(5);
 	encrypt_cycle(6);
-	encrypt_cycle(7);
+	encrypt_cycle_last(7);
 
 	vmovdqu (w+4*4)(CTX), RK1;
 
 	popq %rcx;
 	popq %rbx;
+	popq %rbp;
 
-	leaq (4*4*4)(%rsi), %rax;
+	leaq (4*4*4)(%r11), %rax;
 
 	testb %cl, %cl;
 	jnz __enc_xor8;
 
-	outunpack_blocks(%rsi, RC1, RD1, RA1, RB1, RK1, RX, RY, RK2);
-	outunpack_blocks(%rax, RC2, RD2, RA2, RB2, RK1, RX, RY, RK2);
+	outunpack_blocks(%r11, RC1, RD1, RA1, RB1, RK1, RX0, RY0, RK2);
+	outunpack_blocks(%rax, RC2, RD2, RA2, RB2, RK1, RX0, RY0, RK2);
 
 	ret;
 
 __enc_xor8:
-	outunpack_xor_blocks(%rsi, RC1, RD1, RA1, RB1, RK1, RX, RY, RK2);
-	outunpack_xor_blocks(%rax, RC2, RD2, RA2, RB2, RK1, RX, RY, RK2);
+	outunpack_xor_blocks(%r11, RC1, RD1, RA1, RB1, RK1, RX0, RY0, RK2);
+	outunpack_xor_blocks(%rax, RC2, RD2, RA2, RB2, RK1, RX0, RY0, RK2);
 
 	ret;
 
@@ -269,16 +322,19 @@ twofish_dec_blk_8way:
 	 *	%rdx: src
 	 */
 
+	pushq %rbp;
 	pushq %rbx;
 
 	vmovdqu (w+4*4)(CTX), RK1;
 
 	leaq (4*4*4)(%rdx), %rax;
-	inpack_blocks(%rdx, RC1, RD1, RA1, RB1, RK1, RX, RY, RK2);
-	inpack_blocks(%rax, RC2, RD2, RA2, RB2, RK1, RX, RY, RK2);
+	inpack_blocks(%rdx, RC1, RD1, RA1, RB1, RK1, RX0, RY0, RK2);
+	preload_rgi(RC1);
+	rotate_1l(RA1);
+	inpack_blocks(%rax, RC2, RD2, RA2, RB2, RK1, RX0, RY0, RK2);
+	rotate_1l(RA2);
 
-	xorq RID1, RID1;
-	xorq RID2, RID2;
+	movq %rsi, %r11;
 
 	decrypt_cycle(7);
 	decrypt_cycle(6);
@@ -287,14 +343,15 @@ twofish_dec_blk_8way:
 	decrypt_cycle(3);
 	decrypt_cycle(2);
 	decrypt_cycle(1);
-	decrypt_cycle(0);
+	decrypt_cycle_last(0);
 
 	vmovdqu (w)(CTX), RK1;
 
 	popq %rbx;
+	popq %rbp;
 
-	leaq (4*4*4)(%rsi), %rax;
-	outunpack_blocks(%rsi, RA1, RB1, RC1, RD1, RK1, RX, RY, RK2);
-	outunpack_blocks(%rax, RA2, RB2, RC2, RD2, RK1, RX, RY, RK2);
+	leaq (4*4*4)(%r11), %rax;
+	outunpack_blocks(%r11, RA1, RB1, RC1, RD1, RK1, RX0, RY0, RK2);
+	outunpack_blocks(%rax, RA2, RB2, RC2, RD2, RK1, RX0, RY0, RK2);
 
 	ret;
diff --git a/arch/x86/crypto/twofish_avx_glue.c b/arch/x86/crypto/twofish_avx_glue.c
index 782b67ddaf6a..e7708b5442e0 100644
--- a/arch/x86/crypto/twofish_avx_glue.c
+++ b/arch/x86/crypto/twofish_avx_glue.c
@@ -378,7 +378,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[0].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE,
@@ -398,7 +397,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[1].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE,
@@ -418,7 +416,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[2].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE,
@@ -439,7 +436,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[3].cra_list),
 	.cra_exit		= lrw_twofish_exit_tfm,
 	.cra_u = {
 		.blkcipher = {
@@ -463,7 +459,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[4].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE * 2,
@@ -484,7 +479,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[5].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -506,7 +500,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[6].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -529,7 +522,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[7].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -553,7 +545,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[8].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
@@ -578,7 +569,6 @@ static struct crypto_alg twofish_algs[10] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_ablkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(twofish_algs[9].cra_list),
 	.cra_init		= ablk_init,
 	.cra_exit		= ablk_exit,
 	.cra_u = {
diff --git a/arch/x86/crypto/twofish_glue.c b/arch/x86/crypto/twofish_glue.c
index 359ae084275c..0a5202303501 100644
--- a/arch/x86/crypto/twofish_glue.c
+++ b/arch/x86/crypto/twofish_glue.c
@@ -70,7 +70,6 @@ static struct crypto_alg alg = {
 	.cra_ctxsize		=	sizeof(struct twofish_ctx),
 	.cra_alignmask		=	0,
 	.cra_module		=	THIS_MODULE,
-	.cra_list		=	LIST_HEAD_INIT(alg.cra_list),
 	.cra_u			=	{
 		.cipher = {
 			.cia_min_keysize	=	TF_MIN_KEY_SIZE,
diff --git a/arch/x86/crypto/twofish_glue_3way.c b/arch/x86/crypto/twofish_glue_3way.c
index 15f9347316c8..aa3eb358b7e8 100644
--- a/arch/x86/crypto/twofish_glue_3way.c
+++ b/arch/x86/crypto/twofish_glue_3way.c
@@ -342,7 +342,6 @@ static struct crypto_alg tf_algs[5] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(tf_algs[0].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE,
@@ -362,7 +361,6 @@ static struct crypto_alg tf_algs[5] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(tf_algs[1].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE,
@@ -383,7 +381,6 @@ static struct crypto_alg tf_algs[5] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(tf_algs[2].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE,
@@ -404,7 +401,6 @@ static struct crypto_alg tf_algs[5] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(tf_algs[3].cra_list),
 	.cra_exit		= lrw_twofish_exit_tfm,
 	.cra_u = {
 		.blkcipher = {
@@ -426,7 +422,6 @@ static struct crypto_alg tf_algs[5] = { {
 	.cra_alignmask		= 0,
 	.cra_type		= &crypto_blkcipher_type,
 	.cra_module		= THIS_MODULE,
-	.cra_list		= LIST_HEAD_INIT(tf_algs[4].cra_list),
 	.cra_u = {
 		.blkcipher = {
 			.min_keysize	= TF_MIN_KEY_SIZE * 2,
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 673ac9b63d6b..efc6a958b71d 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -32,6 +32,7 @@
 #include <asm/sigframe.h>
 #include <asm/sighandling.h>
 #include <asm/sys_ia32.h>
+#include <asm/smap.h>
 
 #define FIX_EFLAGS	__FIX_EFLAGS
 
@@ -162,7 +163,8 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 	}
 	seg = get_fs();
 	set_fs(KERNEL_DS);
-	ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->sp);
+	ret = do_sigaltstack((stack_t __force __user *) (uss_ptr ? &uss : NULL),
+			     (stack_t __force __user *) &uoss, regs->sp);
 	set_fs(seg);
 	if (ret >= 0 && uoss_ptr)  {
 		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)))
@@ -250,11 +252,12 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 
 		get_user_ex(tmp, &sc->fpstate);
 		buf = compat_ptr(tmp);
-		err |= restore_i387_xstate_ia32(buf);
 
 		get_user_ex(*pax, &sc->ax);
 	} get_user_catch(err);
 
+	err |= restore_xstate_sig(buf, 1);
+
 	return err;
 }
 
@@ -361,7 +364,7 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
  */
 static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				 size_t frame_size,
-				 void **fpstate)
+				 void __user **fpstate)
 {
 	unsigned long sp;
 
@@ -381,9 +384,12 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 		sp = (unsigned long) ka->sa.sa_restorer;
 
 	if (used_math()) {
-		sp = sp - sig_xstate_ia32_size;
-		*fpstate = (struct _fpstate_ia32 *) sp;
-		if (save_i387_xstate_ia32(*fpstate) < 0)
+		unsigned long fx_aligned, math_size;
+
+		sp = alloc_mathframe(sp, 1, &fx_aligned, &math_size);
+		*fpstate = (struct _fpstate_ia32 __user *) sp;
+		if (save_xstate_sig(*fpstate, (void __user *)fx_aligned,
+				    math_size) < 0)
 			return (void __user *) -1L;
 	}
 
@@ -448,7 +454,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		 * These are actually not used anymore, but left because some
 		 * gdb versions depend on them as a marker.
 		 */
-		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+		put_user_ex(*((u64 *)&code), (u64 __user *)frame->retcode);
 	} put_user_catch(err);
 
 	if (err)
@@ -502,7 +508,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		put_user_ex(sig, &frame->sig);
 		put_user_ex(ptr_to_compat(&frame->info), &frame->pinfo);
 		put_user_ex(ptr_to_compat(&frame->uc), &frame->puc);
-		err |= copy_siginfo_to_user32(&frame->info, info);
 
 		/* Create the ucontext.  */
 		if (cpu_has_xsave)
@@ -514,9 +519,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		put_user_ex(sas_ss_flags(regs->sp),
 			    &frame->uc.uc_stack.ss_flags);
 		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-		err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-					     regs, set->sig[0]);
-		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 
 		if (ka->sa.sa_flags & SA_RESTORER)
 			restorer = ka->sa.sa_restorer;
@@ -529,9 +531,14 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		 * Not actually used anymore, but left because some gdb
 		 * versions need it.
 		 */
-		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+		put_user_ex(*((u64 *)&code), (u64 __user *)frame->retcode);
 	} put_user_catch(err);
 
+	err |= copy_siginfo_to_user32(&frame->info, info);
+	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+				     regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
 	if (err)
 		return -EFAULT;
 
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 20e5f7ba0e6b..9c289504e680 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -14,6 +14,7 @@
 #include <asm/segment.h>
 #include <asm/irqflags.h>
 #include <asm/asm.h>
+#include <asm/smap.h>
 #include <linux/linkage.h>
 #include <linux/err.h>
 
@@ -146,8 +147,10 @@ ENTRY(ia32_sysenter_target)
 	SAVE_ARGS 0,1,0
  	/* no need to do an access_ok check here because rbp has been
  	   32bit zero extended */ 
+	ASM_STAC
 1:	movl	(%rbp),%ebp
 	_ASM_EXTABLE(1b,ia32_badarg)
+	ASM_CLAC
 	orl     $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	testl   $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	CFI_REMEMBER_STATE
@@ -301,8 +304,10 @@ ENTRY(ia32_cstar_target)
 	/* no need to do an access_ok check here because r8 has been
 	   32bit zero extended */ 
 	/* hardware stack frame is complete now */	
+	ASM_STAC
 1:	movl	(%r8),%r9d
 	_ASM_EXTABLE(1b,ia32_badarg)
+	ASM_CLAC
 	orl     $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	testl   $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	CFI_REMEMBER_STATE
@@ -365,6 +370,7 @@ cstar_tracesys:
 END(ia32_cstar_target)
 				
 ia32_badarg:
+	ASM_CLAC
 	movq $-EFAULT,%rax
 	jmp ia32_sysret
 	CFI_ENDPROC
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 4540bece0946..c5b938d92eab 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -287,7 +287,7 @@ asmlinkage long sys32_sigaction(int sig, struct old_sigaction32 __user *act,
 	return ret;
 }
 
-asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr,
+asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int __user *stat_addr,
 			      int options)
 {
 	return compat_sys_wait4(pid, stat_addr, options, NULL);
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index f9c0d3ba9e84..1595d6813432 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -22,7 +22,3 @@ header-y += sigcontext32.h
 header-y += ucontext.h
 header-y += vm86.h
 header-y += vsyscall.h
-
-genhdr-y += unistd_32.h
-genhdr-y += unistd_64.h
-genhdr-y += unistd_x32.h
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index 952bd0100c5c..372231c22a47 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_X86_ALTERNATIVE_ASM_H
+#define _ASM_X86_ALTERNATIVE_ASM_H
+
 #ifdef __ASSEMBLY__
 
 #include <asm/asm.h>
@@ -5,10 +8,10 @@
 #ifdef CONFIG_SMP
 	.macro LOCK_PREFIX
 672:	lock
-	.section .smp_locks,"a"
+	.pushsection .smp_locks,"a"
 	.balign 4
 	.long 672b - .
-	.previous
+	.popsection
 	.endm
 #else
 	.macro LOCK_PREFIX
@@ -24,3 +27,5 @@
 .endm
 
 #endif  /*  __ASSEMBLY__  */
+
+#endif /* _ASM_X86_ALTERNATIVE_ASM_H */
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 70780689599a..58ed6d96a6ac 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -29,10 +29,10 @@
 
 #ifdef CONFIG_SMP
 #define LOCK_PREFIX_HERE \
-		".section .smp_locks,\"a\"\n"	\
-		".balign 4\n"			\
-		".long 671f - .\n" /* offset */	\
-		".previous\n"			\
+		".pushsection .smp_locks,\"a\"\n"	\
+		".balign 4\n"				\
+		".long 671f - .\n" /* offset */		\
+		".popsection\n"				\
 		"671:"
 
 #define LOCK_PREFIX LOCK_PREFIX_HERE "\n\tlock; "
@@ -60,7 +60,7 @@ extern void alternatives_smp_module_add(struct module *mod, char *name,
 					void *locks, void *locks_end,
 					void *text, void *text_end);
 extern void alternatives_smp_module_del(struct module *mod);
-extern void alternatives_smp_switch(int smp);
+extern void alternatives_enable_smp(void);
 extern int alternatives_text_reserved(void *start, void *end);
 extern bool skip_smp_alternatives;
 #else
@@ -68,7 +68,7 @@ static inline void alternatives_smp_module_add(struct module *mod, char *name,
 					       void *locks, void *locks_end,
 					       void *text, void *text_end) {}
 static inline void alternatives_smp_module_del(struct module *mod) {}
-static inline void alternatives_smp_switch(int smp) {}
+static inline void alternatives_enable_smp(void) {}
 static inline int alternatives_text_reserved(void *start, void *end)
 {
 	return 0;
@@ -99,30 +99,30 @@ static inline int alternatives_text_reserved(void *start, void *end)
 /* alternative assembly primitive: */
 #define ALTERNATIVE(oldinstr, newinstr, feature)			\
 	OLDINSTR(oldinstr)						\
-	".section .altinstructions,\"a\"\n"				\
+	".pushsection .altinstructions,\"a\"\n"				\
 	ALTINSTR_ENTRY(feature, 1)					\
-	".previous\n"							\
-	".section .discard,\"aw\",@progbits\n"				\
+	".popsection\n"							\
+	".pushsection .discard,\"aw\",@progbits\n"			\
 	DISCARD_ENTRY(1)						\
-	".previous\n"							\
-	".section .altinstr_replacement, \"ax\"\n"			\
+	".popsection\n"							\
+	".pushsection .altinstr_replacement, \"ax\"\n"			\
 	ALTINSTR_REPLACEMENT(newinstr, feature, 1)			\
-	".previous"
+	".popsection"
 
 #define ALTERNATIVE_2(oldinstr, newinstr1, feature1, newinstr2, feature2)\
 	OLDINSTR(oldinstr)						\
-	".section .altinstructions,\"a\"\n"				\
+	".pushsection .altinstructions,\"a\"\n"				\
 	ALTINSTR_ENTRY(feature1, 1)					\
 	ALTINSTR_ENTRY(feature2, 2)					\
-	".previous\n"							\
-	".section .discard,\"aw\",@progbits\n"				\
+	".popsection\n"							\
+	".pushsection .discard,\"aw\",@progbits\n"			\
 	DISCARD_ENTRY(1)						\
 	DISCARD_ENTRY(2)						\
-	".previous\n"							\
-	".section .altinstr_replacement, \"ax\"\n"			\
+	".popsection\n"							\
+	".pushsection .altinstr_replacement, \"ax\"\n"			\
 	ALTINSTR_REPLACEMENT(newinstr1, feature1, 1)			\
 	ALTINSTR_REPLACEMENT(newinstr2, feature2, 2)			\
-	".previous"
+	".popsection"
 
 /*
  * This must be included *after* the definition of ALTERNATIVE due to
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f34261296ffb..338803422239 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -409,7 +409,7 @@ extern struct apic *apic;
  * to enforce the order with in them.
  */
 #define apic_driver(sym)					\
-	static struct apic *__apicdrivers_##sym __used		\
+	static const struct apic *__apicdrivers_##sym __used		\
 	__aligned(sizeof(struct apic *))			\
 	__section(.apicdrivers) = { &sym }
 
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index 58cb6d4085f7..250b8774c158 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -309,9 +309,9 @@ static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
 #define smp_mb__after_atomic_inc()	barrier()
 
 #ifdef CONFIG_X86_32
-# include "atomic64_32.h"
+# include <asm/atomic64_32.h>
 #else
-# include "atomic64_64.h"
+# include <asm/atomic64_64.h>
 #endif
 
 #endif /* _ASM_X86_ATOMIC_H */
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 72f5009deb5a..6dfd0195bb55 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -355,7 +355,7 @@ static int test_bit(int nr, const volatile unsigned long *addr);
  */
 static inline unsigned long __ffs(unsigned long word)
 {
-	asm("bsf %1,%0"
+	asm("rep; bsf %1,%0"
 		: "=r" (word)
 		: "rm" (word));
 	return word;
@@ -369,7 +369,7 @@ static inline unsigned long __ffs(unsigned long word)
  */
 static inline unsigned long ffz(unsigned long word)
 {
-	asm("bsf %1,%0"
+	asm("rep; bsf %1,%0"
 		: "=r" (word)
 		: "r" (~word));
 	return word;
@@ -417,10 +417,9 @@ static inline int ffs(int x)
 	 * We cannot do this on 32 bits because at the very least some
 	 * 486 CPUs did not behave this way.
 	 */
-	long tmp = -1;
 	asm("bsfl %1,%0"
 	    : "=r" (r)
-	    : "rm" (x), "0" (tmp));
+	    : "rm" (x), "0" (-1));
 #elif defined(CONFIG_X86_CMOV)
 	asm("bsfl %1,%0\n\t"
 	    "cmovzl %2,%0"
@@ -459,10 +458,9 @@ static inline int fls(int x)
 	 * We cannot do this on 32 bits because at the very least some
 	 * 486 CPUs did not behave this way.
 	 */
-	long tmp = -1;
 	asm("bsrl %1,%0"
 	    : "=r" (r)
-	    : "rm" (x), "0" (tmp));
+	    : "rm" (x), "0" (-1));
 #elif defined(CONFIG_X86_CMOV)
 	asm("bsrl %1,%0\n\t"
 	    "cmovzl %2,%0"
@@ -490,13 +488,13 @@ static inline int fls(int x)
 #ifdef CONFIG_X86_64
 static __always_inline int fls64(__u64 x)
 {
-	long bitpos = -1;
+	int bitpos = -1;
 	/*
 	 * AMD64 says BSRQ won't clobber the dest reg if x==0; Intel64 says the
 	 * dest reg is undefined if x==0, but their CPU architect says its
 	 * value is written to set it to the same as before.
 	 */
-	asm("bsrq %1,%0"
+	asm("bsrq %1,%q0"
 	    : "+r" (bitpos)
 	    : "rm" (x));
 	return bitpos + 1;
diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h
index a9e3a740f697..0fa675033912 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/include/asm/calling.h
@@ -46,41 +46,39 @@ For 32-bit we have the following conventions - kernel is built with
 
 */
 
-#include "dwarf2.h"
+#include <asm/dwarf2.h>
 
 /*
- * 64-bit system call stack frame layout defines and helpers, for
- * assembly code (note that the seemingly unnecessary parentheses
- * are to prevent cpp from inserting spaces in expressions that get
- * passed to macros):
+ * 64-bit system call stack frame layout defines and helpers,
+ * for assembly code:
  */
 
-#define R15		  (0)
-#define R14		  (8)
-#define R13		 (16)
-#define R12		 (24)
-#define RBP		 (32)
-#define RBX		 (40)
+#define R15		  0
+#define R14		  8
+#define R13		 16
+#define R12		 24
+#define RBP		 32
+#define RBX		 40
 
 /* arguments: interrupts/non tracing syscalls only save up to here: */
-#define R11		 (48)
-#define R10		 (56)
-#define R9		 (64)
-#define R8		 (72)
-#define RAX		 (80)
-#define RCX		 (88)
-#define RDX		 (96)
-#define RSI		(104)
-#define RDI		(112)
-#define ORIG_RAX	(120)       /* + error_code */
+#define R11		 48
+#define R10		 56
+#define R9		 64
+#define R8		 72
+#define RAX		 80
+#define RCX		 88
+#define RDX		 96
+#define RSI		104
+#define RDI		112
+#define ORIG_RAX	120       /* + error_code */
 /* end of arguments */
 
 /* cpu exception frame or undefined in case of fast syscall: */
-#define RIP		(128)
-#define CS		(136)
-#define EFLAGS		(144)
-#define RSP		(152)
-#define SS		(160)
+#define RIP		128
+#define CS		136
+#define EFLAGS		144
+#define RSP		152
+#define SS		160
 
 #define ARGOFFSET	R11
 #define SWFRAME		ORIG_RAX
diff --git a/arch/x86/include/asm/checksum.h b/arch/x86/include/asm/checksum.h
index 848850fd7d62..5f5bb0f97361 100644
--- a/arch/x86/include/asm/checksum.h
+++ b/arch/x86/include/asm/checksum.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_X86_32
-# include "checksum_32.h"
+# include <asm/checksum_32.h>
 #else
-# include "checksum_64.h"
+# include <asm/checksum_64.h>
 #endif
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 99480e55973d..8d871eaddb66 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -138,9 +138,9 @@ extern void __add_wrong_size(void)
 	__raw_cmpxchg((ptr), (old), (new), (size), "")
 
 #ifdef CONFIG_X86_32
-# include "cmpxchg_32.h"
+# include <asm/cmpxchg_32.h>
 #else
-# include "cmpxchg_64.h"
+# include <asm/cmpxchg_64.h>
 #endif
 
 #ifdef __HAVE_ARCH_CMPXCHG
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index fedf32b73e65..59c6c401f79f 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -41,6 +41,7 @@ typedef s64 __attribute__((aligned(4))) compat_s64;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
 typedef u64 __attribute__((aligned(4))) compat_u64;
+typedef u32		compat_uptr_t;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
@@ -124,6 +125,78 @@ typedef u32		compat_old_sigset_t;	/* at least 32 bits */
 
 typedef u32               compat_sigset_word;
 
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[128/sizeof(int) - 3];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+			int _overrun_incr;	/* amount to add to overrun */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGCHLD (x32 version) */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_s64 _utime;
+			compat_s64 _stime;
+		} _sigchld_x32;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;	/* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+
+		struct {
+			unsigned int _call_addr; /* calling insn */
+			int _syscall;	/* triggering system call number */
+			unsigned int _arch;	/* AUDIT_ARCH_* of syscall */
+		} _sigsys;
+	} _sifields;
+} compat_siginfo_t;
+
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
@@ -209,7 +282,6 @@ typedef struct user_regs_struct32 compat_elf_gregset_t;
  * as pointers because the syscall entry code will have
  * appropriately converted them already.
  */
-typedef	u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 6b7ee5ff6820..8c297aa53eef 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -4,7 +4,9 @@
 #ifndef _ASM_X86_CPUFEATURE_H
 #define _ASM_X86_CPUFEATURE_H
 
+#ifndef _ASM_X86_REQUIRED_FEATURES_H
 #include <asm/required-features.h>
+#endif
 
 #define NCAPINTS	10	/* N 32-bit words worth of info */
 
@@ -97,6 +99,7 @@
 #define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
 #define X86_FEATURE_AMD_DCM     (3*32+27) /* multi-node processor */
 #define X86_FEATURE_APERFMPERF	(3*32+28) /* APERFMPERF */
+#define X86_FEATURE_EAGER_FPU	(3*32+29) /* "eagerfpu" Non lazy FPU restore */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
@@ -209,6 +212,7 @@
 #define X86_FEATURE_RTM		(9*32+11) /* Restricted Transactional Memory */
 #define X86_FEATURE_RDSEED	(9*32+18) /* The RDSEED instruction */
 #define X86_FEATURE_ADX		(9*32+19) /* The ADCX and ADOX instructions */
+#define X86_FEATURE_SMAP	(9*32+20) /* Supervisor Mode Access Prevention */
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 
@@ -299,12 +303,14 @@ extern const char * const x86_power_flags[32];
 #define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
 #define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
 #define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
+#define cpu_has_xsaveopt	boot_cpu_has(X86_FEATURE_XSAVEOPT)
 #define cpu_has_osxsave		boot_cpu_has(X86_FEATURE_OSXSAVE)
 #define cpu_has_hypervisor	boot_cpu_has(X86_FEATURE_HYPERVISOR)
 #define cpu_has_pclmulqdq	boot_cpu_has(X86_FEATURE_PCLMULQDQ)
 #define cpu_has_perfctr_core	boot_cpu_has(X86_FEATURE_PERFCTR_CORE)
 #define cpu_has_cx8		boot_cpu_has(X86_FEATURE_CX8)
 #define cpu_has_cx16		boot_cpu_has(X86_FEATURE_CX16)
+#define cpu_has_eager_fpu	boot_cpu_has(X86_FEATURE_EAGER_FPU)
 
 #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
 # define cpu_has_invlpg		1
diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h
index 75f4c6d6a331..831dbb9c6c02 100644
--- a/arch/x86/include/asm/fpu-internal.h
+++ b/arch/x86/include/asm/fpu-internal.h
@@ -12,6 +12,7 @@
 
 #include <linux/kernel_stat.h>
 #include <linux/regset.h>
+#include <linux/compat.h>
 #include <linux/slab.h>
 #include <asm/asm.h>
 #include <asm/cpufeature.h>
@@ -20,43 +21,76 @@
 #include <asm/user.h>
 #include <asm/uaccess.h>
 #include <asm/xsave.h>
+#include <asm/smap.h>
 
-extern unsigned int sig_xstate_size;
+#ifdef CONFIG_X86_64
+# include <asm/sigcontext32.h>
+# include <asm/user32.h>
+int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			compat_sigset_t *set, struct pt_regs *regs);
+int ia32_setup_frame(int sig, struct k_sigaction *ka,
+		     compat_sigset_t *set, struct pt_regs *regs);
+#else
+# define user_i387_ia32_struct	user_i387_struct
+# define user32_fxsr_struct	user_fxsr_struct
+# define ia32_setup_frame	__setup_frame
+# define ia32_setup_rt_frame	__setup_rt_frame
+#endif
+
+extern unsigned int mxcsr_feature_mask;
 extern void fpu_init(void);
+extern void eager_fpu_init(void);
 
 DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
 
+extern void convert_from_fxsr(struct user_i387_ia32_struct *env,
+			      struct task_struct *tsk);
+extern void convert_to_fxsr(struct task_struct *tsk,
+			    const struct user_i387_ia32_struct *env);
+
 extern user_regset_active_fn fpregs_active, xfpregs_active;
 extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
 				xstateregs_get;
 extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
 				 xstateregs_set;
 
-
 /*
  * xstateregs_active == fpregs_active. Please refer to the comment
  * at the definition of fpregs_active.
  */
 #define xstateregs_active	fpregs_active
 
-extern struct _fpx_sw_bytes fx_sw_reserved;
-#ifdef CONFIG_IA32_EMULATION
-extern unsigned int sig_xstate_ia32_size;
-extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
-struct _fpstate_ia32;
-struct _xstate_ia32;
-extern int save_i387_xstate_ia32(void __user *buf);
-extern int restore_i387_xstate_ia32(void __user *buf);
-#endif
-
 #ifdef CONFIG_MATH_EMULATION
+# define HAVE_HWFP		(boot_cpu_data.hard_math)
 extern void finit_soft_fpu(struct i387_soft_struct *soft);
 #else
+# define HAVE_HWFP		1
 static inline void finit_soft_fpu(struct i387_soft_struct *soft) {}
 #endif
 
+static inline int is_ia32_compat_frame(void)
+{
+	return config_enabled(CONFIG_IA32_EMULATION) &&
+	       test_thread_flag(TIF_IA32);
+}
+
+static inline int is_ia32_frame(void)
+{
+	return config_enabled(CONFIG_X86_32) || is_ia32_compat_frame();
+}
+
+static inline int is_x32_frame(void)
+{
+	return config_enabled(CONFIG_X86_X32_ABI) && test_thread_flag(TIF_X32);
+}
+
 #define X87_FSW_ES (1 << 7)	/* Exception Summary */
 
+static __always_inline __pure bool use_eager_fpu(void)
+{
+	return static_cpu_has(X86_FEATURE_EAGER_FPU);
+}
+
 static __always_inline __pure bool use_xsaveopt(void)
 {
 	return static_cpu_has(X86_FEATURE_XSAVEOPT);
@@ -72,6 +106,13 @@ static __always_inline __pure bool use_fxsr(void)
         return static_cpu_has(X86_FEATURE_FXSR);
 }
 
+static inline void fx_finit(struct i387_fxsave_struct *fx)
+{
+	memset(fx, 0, xstate_size);
+	fx->cwd = 0x37f;
+	fx->mxcsr = MXCSR_DEFAULT;
+}
+
 extern void __sanitize_i387_state(struct task_struct *);
 
 static inline void sanitize_i387_state(struct task_struct *tsk)
@@ -81,131 +122,121 @@ static inline void sanitize_i387_state(struct task_struct *tsk)
 	__sanitize_i387_state(tsk);
 }
 
-#ifdef CONFIG_X86_64
-static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
-{
-	int err;
-
-	/* See comment in fxsave() below. */
-#ifdef CONFIG_AS_FXSAVEQ
-	asm volatile("1:  fxrstorq %[fx]\n\t"
-		     "2:\n"
-		     ".section .fixup,\"ax\"\n"
-		     "3:  movl $-1,%[err]\n"
-		     "    jmp  2b\n"
-		     ".previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : [err] "=r" (err)
-		     : [fx] "m" (*fx), "0" (0));
-#else
-	asm volatile("1:  rex64/fxrstor (%[fx])\n\t"
-		     "2:\n"
-		     ".section .fixup,\"ax\"\n"
-		     "3:  movl $-1,%[err]\n"
-		     "    jmp  2b\n"
-		     ".previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : [err] "=r" (err)
-		     : [fx] "R" (fx), "m" (*fx), "0" (0));
-#endif
-	return err;
+#define user_insn(insn, output, input...)				\
+({									\
+	int err;							\
+	asm volatile(ASM_STAC "\n"					\
+		     "1:" #insn "\n\t"					\
+		     "2: " ASM_CLAC "\n"				\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:  movl $-1,%[err]\n"				\
+		     "    jmp  2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : [err] "=r" (err), output				\
+		     : "0"(0), input);					\
+	err;								\
+})
+
+#define check_insn(insn, output, input...)				\
+({									\
+	int err;							\
+	asm volatile("1:" #insn "\n\t"					\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:  movl $-1,%[err]\n"				\
+		     "    jmp  2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : [err] "=r" (err), output				\
+		     : "0"(0), input);					\
+	err;								\
+})
+
+static inline int fsave_user(struct i387_fsave_struct __user *fx)
+{
+	return user_insn(fnsave %[fx]; fwait,  [fx] "=m" (*fx), "m" (*fx));
 }
 
 static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 {
-	int err;
+	if (config_enabled(CONFIG_X86_32))
+		return user_insn(fxsave %[fx], [fx] "=m" (*fx), "m" (*fx));
+	else if (config_enabled(CONFIG_AS_FXSAVEQ))
+		return user_insn(fxsaveq %[fx], [fx] "=m" (*fx), "m" (*fx));
 
-	/*
-	 * Clear the bytes not touched by the fxsave and reserved
-	 * for the SW usage.
-	 */
-	err = __clear_user(&fx->sw_reserved,
-			   sizeof(struct _fpx_sw_bytes));
-	if (unlikely(err))
-		return -EFAULT;
-
-	/* See comment in fxsave() below. */
-#ifdef CONFIG_AS_FXSAVEQ
-	asm volatile("1:  fxsaveq %[fx]\n\t"
-		     "2:\n"
-		     ".section .fixup,\"ax\"\n"
-		     "3:  movl $-1,%[err]\n"
-		     "    jmp  2b\n"
-		     ".previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : [err] "=r" (err), [fx] "=m" (*fx)
-		     : "0" (0));
-#else
-	asm volatile("1:  rex64/fxsave (%[fx])\n\t"
-		     "2:\n"
-		     ".section .fixup,\"ax\"\n"
-		     "3:  movl $-1,%[err]\n"
-		     "    jmp  2b\n"
-		     ".previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : [err] "=r" (err), "=m" (*fx)
-		     : [fx] "R" (fx), "0" (0));
-#endif
-	if (unlikely(err) &&
-	    __clear_user(fx, sizeof(struct i387_fxsave_struct)))
-		err = -EFAULT;
-	/* No need to clear here because the caller clears USED_MATH */
-	return err;
+	/* See comment in fpu_fxsave() below. */
+	return user_insn(rex64/fxsave (%[fx]), "=m" (*fx), [fx] "R" (fx));
 }
 
-static inline void fpu_fxsave(struct fpu *fpu)
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 {
-	/* Using "rex64; fxsave %0" is broken because, if the memory operand
-	   uses any extended registers for addressing, a second REX prefix
-	   will be generated (to the assembler, rex64 followed by semicolon
-	   is a separate instruction), and hence the 64-bitness is lost. */
+	if (config_enabled(CONFIG_X86_32))
+		return check_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+	else if (config_enabled(CONFIG_AS_FXSAVEQ))
+		return check_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 
-#ifdef CONFIG_AS_FXSAVEQ
-	/* Using "fxsaveq %0" would be the ideal choice, but is only supported
-	   starting with gas 2.16. */
-	__asm__ __volatile__("fxsaveq %0"
-			     : "=m" (fpu->state->fxsave));
-#else
-	/* Using, as a workaround, the properly prefixed form below isn't
-	   accepted by any binutils version so far released, complaining that
-	   the same type of prefix is used twice if an extended register is
-	   needed for addressing (fix submitted to mainline 2005-11-21).
-	asm volatile("rex64/fxsave %0"
-		     : "=m" (fpu->state->fxsave));
-	   This, however, we can work around by forcing the compiler to select
-	   an addressing mode that doesn't require extended registers. */
-	asm volatile("rex64/fxsave (%[fx])"
-		     : "=m" (fpu->state->fxsave)
-		     : [fx] "R" (&fpu->state->fxsave));
-#endif
+	/* See comment in fpu_fxsave() below. */
+	return check_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
+			  "m" (*fx));
 }
 
-#else  /* CONFIG_X86_32 */
+static inline int fxrstor_user(struct i387_fxsave_struct __user *fx)
+{
+	if (config_enabled(CONFIG_X86_32))
+		return user_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+	else if (config_enabled(CONFIG_AS_FXSAVEQ))
+		return user_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
 
-/* perform fxrstor iff the processor has extended states, otherwise frstor */
-static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
+	/* See comment in fpu_fxsave() below. */
+	return user_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
+			  "m" (*fx));
+}
+
+static inline int frstor_checking(struct i387_fsave_struct *fx)
 {
-	/*
-	 * The "nop" is needed to make the instructions the same
-	 * length.
-	 */
-	alternative_input(
-		"nop ; frstor %1",
-		"fxrstor %1",
-		X86_FEATURE_FXSR,
-		"m" (*fx));
+	return check_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
+}
 
-	return 0;
+static inline int frstor_user(struct i387_fsave_struct __user *fx)
+{
+	return user_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx));
 }
 
 static inline void fpu_fxsave(struct fpu *fpu)
 {
-	asm volatile("fxsave %[fx]"
-		     : [fx] "=m" (fpu->state->fxsave));
+	if (config_enabled(CONFIG_X86_32))
+		asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state->fxsave));
+	else if (config_enabled(CONFIG_AS_FXSAVEQ))
+		asm volatile("fxsaveq %0" : "=m" (fpu->state->fxsave));
+	else {
+		/* Using "rex64; fxsave %0" is broken because, if the memory
+		 * operand uses any extended registers for addressing, a second
+		 * REX prefix will be generated (to the assembler, rex64
+		 * followed by semicolon is a separate instruction), and hence
+		 * the 64-bitness is lost.
+		 *
+		 * Using "fxsaveq %0" would be the ideal choice, but is only
+		 * supported starting with gas 2.16.
+		 *
+		 * Using, as a workaround, the properly prefixed form below
+		 * isn't accepted by any binutils version so far released,
+		 * complaining that the same type of prefix is used twice if
+		 * an extended register is needed for addressing (fix submitted
+		 * to mainline 2005-11-21).
+		 *
+		 *  asm volatile("rex64/fxsave %0" : "=m" (fpu->state->fxsave));
+		 *
+		 * This, however, we can work around by forcing the compiler to
+		 * select an addressing mode that doesn't require extended
+		 * registers.
+		 */
+		asm volatile( "rex64/fxsave (%[fx])"
+			     : "=m" (fpu->state->fxsave)
+			     : [fx] "R" (&fpu->state->fxsave));
+	}
 }
 
-#endif	/* CONFIG_X86_64 */
-
 /*
  * These must be called with preempt disabled. Returns
  * 'true' if the FPU state is still intact.
@@ -248,17 +279,14 @@ static inline int __save_init_fpu(struct task_struct *tsk)
 	return fpu_save_init(&tsk->thread.fpu);
 }
 
-static inline int fpu_fxrstor_checking(struct fpu *fpu)
-{
-	return fxrstor_checking(&fpu->state->fxsave);
-}
-
 static inline int fpu_restore_checking(struct fpu *fpu)
 {
 	if (use_xsave())
-		return fpu_xrstor_checking(fpu);
+		return fpu_xrstor_checking(&fpu->state->xsave);
+	else if (use_fxsr())
+		return fxrstor_checking(&fpu->state->fxsave);
 	else
-		return fpu_fxrstor_checking(fpu);
+		return frstor_checking(&fpu->state->fsave);
 }
 
 static inline int restore_fpu_checking(struct task_struct *tsk)
@@ -310,15 +338,52 @@ static inline void __thread_set_has_fpu(struct task_struct *tsk)
 static inline void __thread_fpu_end(struct task_struct *tsk)
 {
 	__thread_clear_has_fpu(tsk);
-	stts();
+	if (!use_eager_fpu())
+		stts();
 }
 
 static inline void __thread_fpu_begin(struct task_struct *tsk)
 {
-	clts();
+	if (!use_eager_fpu())
+		clts();
 	__thread_set_has_fpu(tsk);
 }
 
+static inline void __drop_fpu(struct task_struct *tsk)
+{
+	if (__thread_has_fpu(tsk)) {
+		/* Ignore delayed exceptions from user space */
+		asm volatile("1: fwait\n"
+			     "2:\n"
+			     _ASM_EXTABLE(1b, 2b));
+		__thread_fpu_end(tsk);
+	}
+}
+
+static inline void drop_fpu(struct task_struct *tsk)
+{
+	/*
+	 * Forget coprocessor state..
+	 */
+	preempt_disable();
+	tsk->fpu_counter = 0;
+	__drop_fpu(tsk);
+	clear_used_math();
+	preempt_enable();
+}
+
+static inline void drop_init_fpu(struct task_struct *tsk)
+{
+	if (!use_eager_fpu())
+		drop_fpu(tsk);
+	else {
+		if (use_xsave())
+			xrstor_state(init_xstate_buf, -1);
+		else
+			fxrstor_checking(&init_xstate_buf->i387);
+	}
+}
+
 /*
  * FPU state switching for scheduling.
  *
@@ -352,7 +417,12 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 {
 	fpu_switch_t fpu;
 
-	fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+	/*
+	 * If the task has used the math, pre-load the FPU on xsave processors
+	 * or if the past 5 consecutive context-switches used math.
+	 */
+	fpu.preload = tsk_used_math(new) && (use_eager_fpu() ||
+					     new->fpu_counter > 5);
 	if (__thread_has_fpu(old)) {
 		if (!__save_init_fpu(old))
 			cpu = ~0;
@@ -364,14 +434,14 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 			new->fpu_counter++;
 			__thread_set_has_fpu(new);
 			prefetch(new->thread.fpu.state);
-		} else
+		} else if (!use_eager_fpu())
 			stts();
 	} else {
 		old->fpu_counter = 0;
 		old->thread.fpu.last_cpu = ~0;
 		if (fpu.preload) {
 			new->fpu_counter++;
-			if (fpu_lazy_restore(new, cpu))
+			if (!use_eager_fpu() && fpu_lazy_restore(new, cpu))
 				fpu.preload = 0;
 			else
 				prefetch(new->thread.fpu.state);
@@ -391,44 +461,40 @@ static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
 {
 	if (fpu.preload) {
 		if (unlikely(restore_fpu_checking(new)))
-			__thread_fpu_end(new);
+			drop_init_fpu(new);
 	}
 }
 
 /*
  * Signal frame handlers...
  */
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+extern int save_xstate_sig(void __user *buf, void __user *fx, int size);
+extern int __restore_xstate_sig(void __user *buf, void __user *fx, int size);
 
-static inline void __clear_fpu(struct task_struct *tsk)
+static inline int xstate_sigframe_size(void)
 {
-	if (__thread_has_fpu(tsk)) {
-		/* Ignore delayed exceptions from user space */
-		asm volatile("1: fwait\n"
-			     "2:\n"
-			     _ASM_EXTABLE(1b, 2b));
-		__thread_fpu_end(tsk);
+	return use_xsave() ? xstate_size + FP_XSTATE_MAGIC2_SIZE : xstate_size;
+}
+
+static inline int restore_xstate_sig(void __user *buf, int ia32_frame)
+{
+	void __user *buf_fx = buf;
+	int size = xstate_sigframe_size();
+
+	if (ia32_frame && use_fxsr()) {
+		buf_fx = buf + sizeof(struct i387_fsave_struct);
+		size += sizeof(struct i387_fsave_struct);
 	}
+
+	return __restore_xstate_sig(buf, buf_fx, size);
 }
 
 /*
- * The actual user_fpu_begin/end() functions
- * need to be preemption-safe.
+ * Need to be preemption-safe.
  *
- * NOTE! user_fpu_end() must be used only after you
- * have saved the FP state, and user_fpu_begin() must
- * be used only immediately before restoring it.
- * These functions do not do any save/restore on
- * their own.
+ * NOTE! user_fpu_begin() must be used only immediately before restoring
+ * it. This function does not do any save/restore on their own.
  */
-static inline void user_fpu_end(void)
-{
-	preempt_disable();
-	__thread_fpu_end(current);
-	preempt_enable();
-}
-
 static inline void user_fpu_begin(void)
 {
 	preempt_disable();
@@ -437,25 +503,32 @@ static inline void user_fpu_begin(void)
 	preempt_enable();
 }
 
+static inline void __save_fpu(struct task_struct *tsk)
+{
+	if (use_xsave())
+		xsave_state(&tsk->thread.fpu.state->xsave, -1);
+	else
+		fpu_fxsave(&tsk->thread.fpu);
+}
+
 /*
  * These disable preemption on their own and are safe
  */
 static inline void save_init_fpu(struct task_struct *tsk)
 {
 	WARN_ON_ONCE(!__thread_has_fpu(tsk));
+
+	if (use_eager_fpu()) {
+		__save_fpu(tsk);
+		return;
+	}
+
 	preempt_disable();
 	__save_init_fpu(tsk);
 	__thread_fpu_end(tsk);
 	preempt_enable();
 }
 
-static inline void clear_fpu(struct task_struct *tsk)
-{
-	preempt_disable();
-	__clear_fpu(tsk);
-	preempt_enable();
-}
-
 /*
  * i387 state interaction
  */
@@ -510,11 +583,34 @@ static inline void fpu_free(struct fpu *fpu)
 	}
 }
 
-static inline void fpu_copy(struct fpu *dst, struct fpu *src)
+static inline void fpu_copy(struct task_struct *dst, struct task_struct *src)
 {
-	memcpy(dst->state, src->state, xstate_size);
+	if (use_eager_fpu()) {
+		memset(&dst->thread.fpu.state->xsave, 0, xstate_size);
+		__save_fpu(dst);
+	} else {
+		struct fpu *dfpu = &dst->thread.fpu;
+		struct fpu *sfpu = &src->thread.fpu;
+
+		unlazy_fpu(src);
+		memcpy(dfpu->state, sfpu->state, xstate_size);
+	}
 }
 
-extern void fpu_finit(struct fpu *fpu);
+static inline unsigned long
+alloc_mathframe(unsigned long sp, int ia32_frame, unsigned long *buf_fx,
+		unsigned long *size)
+{
+	unsigned long frame_size = xstate_sigframe_size();
+
+	*buf_fx = sp = round_down(sp - frame_size, 64);
+	if (ia32_frame && use_fxsr()) {
+		frame_size += sizeof(struct i387_fsave_struct);
+		sp -= sizeof(struct i387_fsave_struct);
+	}
+
+	*size = frame_size;
+	return sp;
+}
 
 #endif
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index b0767bc08740..9a25b522d377 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -3,38 +3,54 @@
 
 #ifdef __ASSEMBLY__
 
-	.macro MCOUNT_SAVE_FRAME
-	/* taken from glibc */
-	subq $0x38, %rsp
-	movq %rax, (%rsp)
-	movq %rcx, 8(%rsp)
-	movq %rdx, 16(%rsp)
-	movq %rsi, 24(%rsp)
-	movq %rdi, 32(%rsp)
-	movq %r8, 40(%rsp)
-	movq %r9, 48(%rsp)
+	/* skip is set if the stack was already partially adjusted */
+	.macro MCOUNT_SAVE_FRAME skip=0
+	 /*
+	  * We add enough stack to save all regs.
+	  */
+	subq $(SS+8-\skip), %rsp
+	movq %rax, RAX(%rsp)
+	movq %rcx, RCX(%rsp)
+	movq %rdx, RDX(%rsp)
+	movq %rsi, RSI(%rsp)
+	movq %rdi, RDI(%rsp)
+	movq %r8, R8(%rsp)
+	movq %r9, R9(%rsp)
+	 /* Move RIP to its proper location */
+	movq SS+8(%rsp), %rdx
+	movq %rdx, RIP(%rsp)
 	.endm
 
-	.macro MCOUNT_RESTORE_FRAME
-	movq 48(%rsp), %r9
-	movq 40(%rsp), %r8
-	movq 32(%rsp), %rdi
-	movq 24(%rsp), %rsi
-	movq 16(%rsp), %rdx
-	movq 8(%rsp), %rcx
-	movq (%rsp), %rax
-	addq $0x38, %rsp
+	.macro MCOUNT_RESTORE_FRAME skip=0
+	movq R9(%rsp), %r9
+	movq R8(%rsp), %r8
+	movq RDI(%rsp), %rdi
+	movq RSI(%rsp), %rsi
+	movq RDX(%rsp), %rdx
+	movq RCX(%rsp), %rcx
+	movq RAX(%rsp), %rax
+	addq $(SS+8-\skip), %rsp
 	.endm
 
 #endif
 
 #ifdef CONFIG_FUNCTION_TRACER
-#define MCOUNT_ADDR		((long)(mcount))
+#ifdef CC_USING_FENTRY
+# define MCOUNT_ADDR		((long)(__fentry__))
+#else
+# define MCOUNT_ADDR		((long)(mcount))
+#endif
 #define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+#define ARCH_SUPPORTS_FTRACE_OPS 1
+#define ARCH_SUPPORTS_FTRACE_SAVE_REGS
+#endif
+
 #ifndef __ASSEMBLY__
 extern void mcount(void);
 extern atomic_t modifying_ftrace_code;
+extern void __fentry__(void);
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
diff --git a/arch/x86/include/asm/futex.h b/arch/x86/include/asm/futex.h
index 71ecbcba1a4e..f373046e63ec 100644
--- a/arch/x86/include/asm/futex.h
+++ b/arch/x86/include/asm/futex.h
@@ -9,10 +9,13 @@
 #include <asm/asm.h>
 #include <asm/errno.h>
 #include <asm/processor.h>
+#include <asm/smap.h>
 
 #define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg)	\
-	asm volatile("1:\t" insn "\n"				\
-		     "2:\t.section .fixup,\"ax\"\n"		\
+	asm volatile("\t" ASM_STAC "\n"				\
+		     "1:\t" insn "\n"				\
+		     "2:\t" ASM_CLAC "\n"			\
+		     "\t.section .fixup,\"ax\"\n"		\
 		     "3:\tmov\t%3, %1\n"			\
 		     "\tjmp\t2b\n"				\
 		     "\t.previous\n"				\
@@ -21,12 +24,14 @@
 		     : "i" (-EFAULT), "0" (oparg), "1" (0))
 
 #define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg)	\
-	asm volatile("1:\tmovl	%2, %0\n"			\
+	asm volatile("\t" ASM_STAC "\n"				\
+		     "1:\tmovl	%2, %0\n"			\
 		     "\tmovl\t%0, %3\n"				\
 		     "\t" insn "\n"				\
 		     "2:\t" LOCK_PREFIX "cmpxchgl %3, %2\n"	\
 		     "\tjnz\t1b\n"				\
-		     "3:\t.section .fixup,\"ax\"\n"		\
+		     "3:\t" ASM_CLAC "\n"			\
+		     "\t.section .fixup,\"ax\"\n"		\
 		     "4:\tmov\t%5, %1\n"			\
 		     "\tjmp\t3b\n"				\
 		     "\t.previous\n"				\
@@ -122,8 +127,10 @@ static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
 		return -EFAULT;
 
-	asm volatile("1:\t" LOCK_PREFIX "cmpxchgl %4, %2\n"
-		     "2:\t.section .fixup, \"ax\"\n"
+	asm volatile("\t" ASM_STAC "\n"
+		     "1:\t" LOCK_PREFIX "cmpxchgl %4, %2\n"
+		     "2:\t" ASM_CLAC "\n"
+		     "\t.section .fixup, \"ax\"\n"
 		     "3:\tmov     %3, %0\n"
 		     "\tjmp     2b\n"
 		     "\t.previous\n"
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index d3895dbf4ddb..81f04cee5f74 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -18,6 +18,10 @@ typedef struct {
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
 	unsigned int irq_call_count;
+	/*
+	 * irq_tlb_count is double-counted in irq_call_count, so it must be
+	 * subtracted from irq_call_count when displaying irq_call_count
+	 */
 	unsigned int irq_tlb_count;
 #endif
 #ifdef CONFIG_X86_THERMAL_VECTOR
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 2c392d663dce..434e2106cc87 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -35,8 +35,6 @@
 #define	HPET_ID_NUMBER_SHIFT	8
 #define HPET_ID_VENDOR_SHIFT	16
 
-#define HPET_ID_VENDOR_8086	0x8086
-
 #define HPET_CFG_ENABLE		0x001
 #define HPET_CFG_LEGACY		0x002
 #define	HPET_LEGACY_8254	2
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 257d9cca214f..ed8089d69094 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -19,12 +19,37 @@ struct pt_regs;
 struct user_i387_struct;
 
 extern int init_fpu(struct task_struct *child);
+extern void fpu_finit(struct fpu *fpu);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 extern void math_state_restore(void);
 
 extern bool irq_fpu_usable(void);
-extern void kernel_fpu_begin(void);
-extern void kernel_fpu_end(void);
+
+/*
+ * Careful: __kernel_fpu_begin/end() must be called with preempt disabled
+ * and they don't touch the preempt state on their own.
+ * If you enable preemption after __kernel_fpu_begin(), preempt notifier
+ * should call the __kernel_fpu_end() to prevent the kernel/user FPU
+ * state from getting corrupted. KVM for example uses this model.
+ *
+ * All other cases use kernel_fpu_begin/end() which disable preemption
+ * during kernel FPU usage.
+ */
+extern void __kernel_fpu_begin(void);
+extern void __kernel_fpu_end(void);
+
+static inline void kernel_fpu_begin(void)
+{
+	WARN_ON_ONCE(!irq_fpu_usable());
+	preempt_disable();
+	__kernel_fpu_begin();
+}
+
+static inline void kernel_fpu_end(void)
+{
+	__kernel_fpu_end();
+	preempt_enable();
+}
 
 /*
  * Some instructions like VIA's padlock instructions generate a spurious
diff --git a/arch/x86/include/asm/ia32.h b/arch/x86/include/asm/ia32.h
index b04cbdb138cd..e6232773ce49 100644
--- a/arch/x86/include/asm/ia32.h
+++ b/arch/x86/include/asm/ia32.h
@@ -86,73 +86,6 @@ struct stat64 {
 	unsigned long long	st_ino;
 } __attribute__((packed));
 
-typedef struct compat_siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[((128 / sizeof(int)) - 3)];
-
-		/* kill() */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;	/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;	/* same as below */
-			int _sys_private;	/* not to be passed to user */
-			int _overrun_incr;	/* amount to add to overrun */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			unsigned int _pid;	/* which child */
-			unsigned int _uid;	/* sender's uid */
-			int _status;		/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* SIGCHLD (x32 version) */
-		struct {
-			unsigned int _pid;	/* which child */
-			unsigned int _uid;	/* sender's uid */
-			int _status;		/* exit code */
-			compat_s64 _utime;
-			compat_s64 _stime;
-		} _sigchld_x32;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			unsigned int _addr;	/* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-
-		struct {
-			unsigned int _call_addr; /* calling insn */
-			int _syscall;	/* triggering system call number */
-			unsigned int _arch;	/* AUDIT_ARCH_* of syscall */
-		} _sigsys;
-	} _sifields;
-} compat_siginfo_t;
-
 #define IA32_STACK_TOP IA32_PAGE_OFFSET
 
 #ifdef __KERNEL__
diff --git a/arch/x86/include/asm/iommu_table.h b/arch/x86/include/asm/iommu_table.h
index f229b13a5f30..f42a04735a0a 100644
--- a/arch/x86/include/asm/iommu_table.h
+++ b/arch/x86/include/asm/iommu_table.h
@@ -48,7 +48,7 @@ struct iommu_table_entry {
 
 
 #define __IOMMU_INIT(_detect, _depend, _early_init, _late_init, _finish)\
-	static const struct iommu_table_entry const			\
+	static const struct iommu_table_entry				\
 		__iommu_entry_##_detect __used				\
 	__attribute__ ((unused, __section__(".iommu_table"),		\
 			aligned((sizeof(void *)))))	\
@@ -63,10 +63,10 @@ struct iommu_table_entry {
  * to stop detecting the other IOMMUs after yours has been detected.
  */
 #define IOMMU_INIT_POST(_detect)					\
-	__IOMMU_INIT(_detect, pci_swiotlb_detect_4gb,  0, 0, 0)
+	__IOMMU_INIT(_detect, pci_swiotlb_detect_4gb,  NULL, NULL, 0)
 
 #define IOMMU_INIT_POST_FINISH(detect)					\
-	__IOMMU_INIT(_detect, pci_swiotlb_detect_4gb,  0, 0, 1)
+	__IOMMU_INIT(_detect, pci_swiotlb_detect_4gb,  NULL, NULL, 1)
 
 /*
  * A more sophisticated version of IOMMU_INIT. This variant requires:
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 547882539157..d3ddd17405d0 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -27,6 +27,7 @@
 #include <asm/insn.h>
 
 #define  __ARCH_WANT_KPROBES_INSN_SLOT
+#define  ARCH_SUPPORTS_KPROBES_ON_FTRACE
 
 struct pt_regs;
 struct kprobe;
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 246617efd67f..a65ec29e6ffb 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -9,6 +9,22 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
+#define DE_VECTOR 0
+#define DB_VECTOR 1
+#define BP_VECTOR 3
+#define OF_VECTOR 4
+#define BR_VECTOR 5
+#define UD_VECTOR 6
+#define NM_VECTOR 7
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+#define MF_VECTOR 16
+#define MC_VECTOR 18
+
 /* Select x86 specific features in <linux/kvm.h> */
 #define __KVM_HAVE_PIT
 #define __KVM_HAVE_IOAPIC
@@ -25,6 +41,7 @@
 #define __KVM_HAVE_DEBUGREGS
 #define __KVM_HAVE_XSAVE
 #define __KVM_HAVE_XCRS
+#define __KVM_HAVE_READONLY_MEM
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index c764f43b71c5..15f960c06ff7 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -86,6 +86,19 @@ struct x86_instruction_info {
 
 struct x86_emulate_ops {
 	/*
+	 * read_gpr: read a general purpose register (rax - r15)
+	 *
+	 * @reg: gpr number.
+	 */
+	ulong (*read_gpr)(struct x86_emulate_ctxt *ctxt, unsigned reg);
+	/*
+	 * write_gpr: write a general purpose register (rax - r15)
+	 *
+	 * @reg: gpr number.
+	 * @val: value to write.
+	 */
+	void (*write_gpr)(struct x86_emulate_ctxt *ctxt, unsigned reg, ulong val);
+	/*
 	 * read_std: Read bytes of standard (non-emulated/special) memory.
 	 *           Used for descriptor reading.
 	 *  @addr:  [IN ] Linear address from which to read.
@@ -200,8 +213,9 @@ typedef u32 __attribute__((vector_size(16))) sse128_t;
 
 /* Type, address-of, and value of an instruction's operand. */
 struct operand {
-	enum { OP_REG, OP_MEM, OP_IMM, OP_XMM, OP_MM, OP_NONE } type;
+	enum { OP_REG, OP_MEM, OP_MEM_STR, OP_IMM, OP_XMM, OP_MM, OP_NONE } type;
 	unsigned int bytes;
+	unsigned int count;
 	union {
 		unsigned long orig_val;
 		u64 orig_val64;
@@ -221,6 +235,7 @@ struct operand {
 		char valptr[sizeof(unsigned long) + 2];
 		sse128_t vec_val;
 		u64 mm_val;
+		void *data;
 	};
 };
 
@@ -236,14 +251,23 @@ struct read_cache {
 	unsigned long end;
 };
 
+/* Execution mode, passed to the emulator. */
+enum x86emul_mode {
+	X86EMUL_MODE_REAL,	/* Real mode.             */
+	X86EMUL_MODE_VM86,	/* Virtual 8086 mode.     */
+	X86EMUL_MODE_PROT16,	/* 16-bit protected mode. */
+	X86EMUL_MODE_PROT32,	/* 32-bit protected mode. */
+	X86EMUL_MODE_PROT64,	/* 64-bit (long) mode.    */
+};
+
 struct x86_emulate_ctxt {
-	struct x86_emulate_ops *ops;
+	const struct x86_emulate_ops *ops;
 
 	/* Register state before/after emulation. */
 	unsigned long eflags;
 	unsigned long eip; /* eip before instruction emulation */
 	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
-	int mode;
+	enum x86emul_mode mode;
 
 	/* interruptibility state, as a result of execution of STI or MOV SS */
 	int interruptibility;
@@ -281,8 +305,10 @@ struct x86_emulate_ctxt {
 	bool rip_relative;
 	unsigned long _eip;
 	struct operand memop;
+	u32 regs_valid;  /* bitmaps of registers in _regs[] that can be read */
+	u32 regs_dirty;  /* bitmaps of registers in _regs[] that have been written */
 	/* Fields above regs are cleared together. */
-	unsigned long regs[NR_VCPU_REGS];
+	unsigned long _regs[NR_VCPU_REGS];
 	struct operand *memopp;
 	struct fetch_cache fetch;
 	struct read_cache io_read;
@@ -293,17 +319,6 @@ struct x86_emulate_ctxt {
 #define REPE_PREFIX	0xf3
 #define REPNE_PREFIX	0xf2
 
-/* Execution mode, passed to the emulator. */
-#define X86EMUL_MODE_REAL     0	/* Real mode.             */
-#define X86EMUL_MODE_VM86     1	/* Virtual 8086 mode.     */
-#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
-#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
-#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
-
-/* any protected mode   */
-#define X86EMUL_MODE_PROT     (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
-			       X86EMUL_MODE_PROT64)
-
 /* CPUID vendors */
 #define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
 #define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
@@ -394,4 +409,7 @@ int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
 			 u16 tss_selector, int idt_index, int reason,
 			 bool has_error_code, u32 error_code);
 int emulate_int_real(struct x86_emulate_ctxt *ctxt, int irq);
+void emulator_invalidate_register_cache(struct x86_emulate_ctxt *ctxt);
+void emulator_writeback_register_cache(struct x86_emulate_ctxt *ctxt);
+
 #endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 09155d64cf7e..b2e11f452435 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -75,22 +75,6 @@
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
-#define DE_VECTOR 0
-#define DB_VECTOR 1
-#define BP_VECTOR 3
-#define OF_VECTOR 4
-#define BR_VECTOR 5
-#define UD_VECTOR 6
-#define NM_VECTOR 7
-#define DF_VECTOR 8
-#define TS_VECTOR 10
-#define NP_VECTOR 11
-#define SS_VECTOR 12
-#define GP_VECTOR 13
-#define PF_VECTOR 14
-#define MF_VECTOR 16
-#define MC_VECTOR 18
-
 #define SELECTOR_TI_MASK (1 << 2)
 #define SELECTOR_RPL_MASK 0x03
 
@@ -287,10 +271,24 @@ struct kvm_mmu {
 	union kvm_mmu_page_role base_role;
 	bool direct_map;
 
+	/*
+	 * Bitmap; bit set = permission fault
+	 * Byte index: page fault error code [4:1]
+	 * Bit index: pte permissions in ACC_* format
+	 */
+	u8 permissions[16];
+
 	u64 *pae_root;
 	u64 *lm_root;
 	u64 rsvd_bits_mask[2][4];
 
+	/*
+	 * Bitmap: bit set = last pte in walk
+	 * index[0:1]: level (zero-based)
+	 * index[2]: pte.ps
+	 */
+	u8 last_pte_bitmap;
+
 	bool nx;
 
 	u64 pdptrs[4]; /* pae */
@@ -414,12 +412,15 @@ struct kvm_vcpu_arch {
 	struct x86_emulate_ctxt emulate_ctxt;
 	bool emulate_regs_need_sync_to_vcpu;
 	bool emulate_regs_need_sync_from_vcpu;
+	int (*complete_userspace_io)(struct kvm_vcpu *vcpu);
 
 	gpa_t time;
 	struct pvclock_vcpu_time_info hv_clock;
 	unsigned int hw_tsc_khz;
 	unsigned int time_offset;
 	struct page *time_page;
+	/* set guest stopped flag in pvclock flags field */
+	bool pvclock_set_guest_stopped_request;
 
 	struct {
 		u64 msr_val;
@@ -454,6 +455,7 @@ struct kvm_vcpu_arch {
 	unsigned long dr6;
 	unsigned long dr7;
 	unsigned long eff_db[KVM_NR_DB_REGS];
+	unsigned long guest_debug_dr7;
 
 	u64 mcg_cap;
 	u64 mcg_status;
@@ -500,14 +502,24 @@ struct kvm_vcpu_arch {
 };
 
 struct kvm_lpage_info {
-	unsigned long rmap_pde;
 	int write_count;
 };
 
 struct kvm_arch_memory_slot {
+	unsigned long *rmap[KVM_NR_PAGE_SIZES];
 	struct kvm_lpage_info *lpage_info[KVM_NR_PAGE_SIZES - 1];
 };
 
+struct kvm_apic_map {
+	struct rcu_head rcu;
+	u8 ldr_bits;
+	/* fields bellow are used to decode ldr values in different modes */
+	u32 cid_shift, cid_mask, lid_mask;
+	struct kvm_lapic *phys_map[256];
+	/* first index is cluster id second is cpu id in a cluster */
+	struct kvm_lapic *logical_map[16][16];
+};
+
 struct kvm_arch {
 	unsigned int n_used_mmu_pages;
 	unsigned int n_requested_mmu_pages;
@@ -525,6 +537,8 @@ struct kvm_arch {
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
 	int vapics_in_nmi_mode;
+	struct mutex apic_map_lock;
+	struct kvm_apic_map *apic_map;
 
 	unsigned int tss_addr;
 	struct page *apic_access_page;
@@ -618,8 +632,7 @@ struct kvm_x86_ops {
 	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
 	void (*vcpu_put)(struct kvm_vcpu *vcpu);
 
-	void (*set_guest_debug)(struct kvm_vcpu *vcpu,
-				struct kvm_guest_debug *dbg);
+	void (*update_db_bp_intercept)(struct kvm_vcpu *vcpu);
 	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
 	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
 	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
@@ -957,6 +970,7 @@ extern bool kvm_rebooting;
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
 int kvm_test_age_hva(struct kvm *kvm, unsigned long hva);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index 2f7712e08b1e..eb3e9d85e1f1 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -102,21 +102,21 @@ struct kvm_vcpu_pv_apf_data {
 extern void kvmclock_init(void);
 extern int kvm_register_clock(char *txt);
 
-#ifdef CONFIG_KVM_CLOCK
+#ifdef CONFIG_KVM_GUEST
 bool kvm_check_and_clear_guest_paused(void);
 #else
 static inline bool kvm_check_and_clear_guest_paused(void)
 {
 	return false;
 }
-#endif /* CONFIG_KVMCLOCK */
+#endif /* CONFIG_KVM_GUEST */
 
 /* This instruction is vmcall.  On non-VT architectures, it will generate a
  * trap that we will then rewrite to the appropriate instruction.
  */
 #define KVM_HYPERCALL ".byte 0x0f,0x01,0xc1"
 
-/* For KVM hypercalls, a three-byte sequence of either the vmrun or the vmmrun
+/* For KVM hypercalls, a three-byte sequence of either the vmcall or the vmmcall
  * instruction.  The hypervisor may replace it with something else but only the
  * instructions are guaranteed to be supported.
  *
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 441520e4174f..54d73b1f00a0 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -33,6 +33,14 @@
 #define MCI_STATUS_PCC   (1ULL<<57)  /* processor context corrupt */
 #define MCI_STATUS_S	 (1ULL<<56)  /* Signaled machine check */
 #define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
+#define MCACOD		  0xffff     /* MCA Error Code */
+
+/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
+#define MCACOD_SCRUB	0x00C0	/* 0xC0-0xCF Memory Scrubbing */
+#define MCACOD_SCRUBMSK	0xfff0
+#define MCACOD_L3WB	0x017A	/* L3 Explicit Writeback */
+#define MCACOD_DATA	0x0134	/* Data Load */
+#define MCACOD_INSTR	0x0150	/* Instruction Fetch */
 
 /* MCi_MISC register defines */
 #define MCI_MISC_ADDR_LSB(m)	((m) & 0x3f)
@@ -108,19 +116,9 @@ struct mce_log {
 /* Software defined banks */
 #define MCE_EXTENDED_BANK	128
 #define MCE_THERMAL_BANK	MCE_EXTENDED_BANK + 0
-
-#define K8_MCE_THRESHOLD_BASE      (MCE_EXTENDED_BANK + 1)      /* MCE_AMD */
-#define K8_MCE_THRESHOLD_BANK_0    (MCE_THRESHOLD_BASE + 0 * 9)
-#define K8_MCE_THRESHOLD_BANK_1    (MCE_THRESHOLD_BASE + 1 * 9)
-#define K8_MCE_THRESHOLD_BANK_2    (MCE_THRESHOLD_BASE + 2 * 9)
-#define K8_MCE_THRESHOLD_BANK_3    (MCE_THRESHOLD_BASE + 3 * 9)
-#define K8_MCE_THRESHOLD_BANK_4    (MCE_THRESHOLD_BASE + 4 * 9)
-#define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
-#define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
-
+#define K8_MCE_THRESHOLD_BASE      (MCE_EXTENDED_BANK + 1)
 
 #ifdef __KERNEL__
-
 extern void mce_register_decode_chain(struct notifier_block *nb);
 extern void mce_unregister_decode_chain(struct notifier_block *nb);
 
@@ -163,6 +161,7 @@ DECLARE_PER_CPU(struct device *, mce_device);
 #ifdef CONFIG_X86_MCE_INTEL
 extern int mce_cmci_disabled;
 extern int mce_ignore_ce;
+extern int mce_bios_cmci_threshold;
 void mce_intel_feature_init(struct cpuinfo_x86 *c);
 void cmci_clear(void);
 void cmci_reenable(void);
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 4ebe157bf73d..43d921b4752c 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -15,8 +15,8 @@ struct microcode_ops {
 	enum ucode_state (*request_microcode_user) (int cpu,
 				const void __user *buf, size_t size);
 
-	enum ucode_state (*request_microcode_fw) (int cpu,
-				struct device *device);
+	enum ucode_state (*request_microcode_fw) (int cpu, struct device *,
+						  bool refresh_fw);
 
 	void (*microcode_fini_cpu) (int cpu);
 
@@ -49,12 +49,6 @@ static inline struct microcode_ops * __init init_intel_microcode(void)
 #ifdef CONFIG_MICROCODE_AMD
 extern struct microcode_ops * __init init_amd_microcode(void);
 extern void __exit exit_amd_microcode(void);
-
-static inline void get_ucode_data(void *to, const u8 *from, size_t n)
-{
-	memcpy(to, from, n);
-}
-
 #else
 static inline struct microcode_ops * __init init_amd_microcode(void)
 {
diff --git a/arch/x86/include/asm/mmzone.h b/arch/x86/include/asm/mmzone.h
index 64217ea16a36..d497bc425cae 100644
--- a/arch/x86/include/asm/mmzone.h
+++ b/arch/x86/include/asm/mmzone.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_X86_32
-# include "mmzone_32.h"
+# include <asm/mmzone_32.h>
 #else
-# include "mmzone_64.h"
+# include <asm/mmzone_64.h>
 #endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 957ec87385af..fbee9714d9ab 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -248,6 +248,9 @@
 
 #define MSR_IA32_PERF_STATUS		0x00000198
 #define MSR_IA32_PERF_CTL		0x00000199
+#define MSR_AMD_PSTATE_DEF_BASE		0xc0010064
+#define MSR_AMD_PERF_STATUS		0xc0010063
+#define MSR_AMD_PERF_CTL		0xc0010062
 
 #define MSR_IA32_MPERF			0x000000e7
 #define MSR_IA32_APERF			0x000000e8
diff --git a/arch/x86/include/asm/mutex.h b/arch/x86/include/asm/mutex.h
index a731b9c573a6..7d3a48275394 100644
--- a/arch/x86/include/asm/mutex.h
+++ b/arch/x86/include/asm/mutex.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_X86_32
-# include "mutex_32.h"
+# include <asm/mutex_32.h>
 #else
-# include "mutex_64.h"
+# include <asm/mutex_64.h>
 #endif
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index bfacd2ccf651..49119fcea2dc 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -53,9 +53,9 @@ static inline int numa_cpu_node(int cpu)
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_X86_32
-# include "numa_32.h"
+# include <asm/numa_32.h>
 #else
-# include "numa_64.h"
+# include <asm/numa_64.h>
 #endif
 
 #ifdef CONFIG_NUMA
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index df75d07571ce..6e41b9343928 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -141,7 +141,7 @@ void default_restore_msi_irqs(struct pci_dev *dev, int irq);
 #endif  /* __KERNEL__ */
 
 #ifdef CONFIG_X86_64
-#include "pci_64.h"
+#include <asm/pci_64.h>
 #endif
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index dab39350e51e..4fabcdf1cfa7 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -196,11 +196,16 @@ static inline u32 get_ibs_caps(void) { return 0; }
 extern void perf_events_lapic_init(void);
 
 /*
- * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups.
- * This flag is otherwise unused and ABI specified to be 0, so nobody should
- * care what we do with it.
+ * Abuse bits {3,5} of the cpu eflags register. These flags are otherwise
+ * unused and ABI specified to be 0, so nobody should care what we do with
+ * them.
+ *
+ * EXACT - the IP points to the exact instruction that triggered the
+ *         event (HW bugs exempt).
+ * VM    - original X86_VM_MASK; see set_linear_ip().
  */
 #define PERF_EFLAGS_EXACT	(1UL << 3)
+#define PERF_EFLAGS_VM		(1UL << 5)
 
 struct pt_regs;
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
@@ -257,4 +262,6 @@ static inline void perf_check_microcode(void) { }
  static inline void amd_pmu_disable_virt(void) { }
 #endif
 
+#define arch_perf_out_copy_user copy_from_user_nmi
+
 #endif /* _ASM_X86_PERF_EVENT_H */
diff --git a/arch/x86/include/asm/perf_regs.h b/arch/x86/include/asm/perf_regs.h
new file mode 100644
index 000000000000..3f2207bfd17b
--- /dev/null
+++ b/arch/x86/include/asm/perf_regs.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_PERF_REGS_H
+#define _ASM_X86_PERF_REGS_H
+
+enum perf_event_x86_regs {
+	PERF_REG_X86_AX,
+	PERF_REG_X86_BX,
+	PERF_REG_X86_CX,
+	PERF_REG_X86_DX,
+	PERF_REG_X86_SI,
+	PERF_REG_X86_DI,
+	PERF_REG_X86_BP,
+	PERF_REG_X86_SP,
+	PERF_REG_X86_IP,
+	PERF_REG_X86_FLAGS,
+	PERF_REG_X86_CS,
+	PERF_REG_X86_SS,
+	PERF_REG_X86_DS,
+	PERF_REG_X86_ES,
+	PERF_REG_X86_FS,
+	PERF_REG_X86_GS,
+	PERF_REG_X86_R8,
+	PERF_REG_X86_R9,
+	PERF_REG_X86_R10,
+	PERF_REG_X86_R11,
+	PERF_REG_X86_R12,
+	PERF_REG_X86_R13,
+	PERF_REG_X86_R14,
+	PERF_REG_X86_R15,
+
+	PERF_REG_X86_32_MAX = PERF_REG_X86_GS + 1,
+	PERF_REG_X86_64_MAX = PERF_REG_X86_R15 + 1,
+};
+#endif /* _ASM_X86_PERF_REGS_H */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 49afb3f41eb6..fc9948465293 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -384,9 +384,9 @@ pte_t *populate_extra_pte(unsigned long vaddr);
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
-# include "pgtable_32.h"
+# include <asm/pgtable_32.h>
 #else
-# include "pgtable_64.h"
+# include <asm/pgtable_64.h>
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 013286a10c2c..ec8a1fc9505d 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -174,9 +174,9 @@
 #endif
 
 #ifdef CONFIG_X86_32
-# include "pgtable_32_types.h"
+# include <asm/pgtable_32_types.h>
 #else
-# include "pgtable_64_types.h"
+# include <asm/pgtable_64_types.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -303,11 +303,9 @@ void set_pte_vaddr(unsigned long vaddr, pte_t pte);
 
 extern void native_pagetable_reserve(u64 start, u64 end);
 #ifdef CONFIG_X86_32
-extern void native_pagetable_setup_start(pgd_t *base);
-extern void native_pagetable_setup_done(pgd_t *base);
+extern void native_pagetable_init(void);
 #else
-#define native_pagetable_setup_start x86_init_pgd_noop
-#define native_pagetable_setup_done  x86_init_pgd_noop
+#define native_pagetable_init        paging_init
 #endif
 
 struct seq_file;
diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h
index 7ef7c3020e5c..bad3665c25fc 100644
--- a/arch/x86/include/asm/posix_types.h
+++ b/arch/x86/include/asm/posix_types.h
@@ -1,15 +1,15 @@
 #ifdef __KERNEL__
 # ifdef CONFIG_X86_32
-#  include "posix_types_32.h"
+#  include <asm/posix_types_32.h>
 # else
-#  include "posix_types_64.h"
+#  include <asm/posix_types_64.h>
 # endif
 #else
 # ifdef __i386__
-#  include "posix_types_32.h"
+#  include <asm/posix_types_32.h>
 # elif defined(__ILP32__)
-#  include "posix_types_x32.h"
+#  include <asm/posix_types_x32.h>
 # else
-#  include "posix_types_64.h"
+#  include <asm/posix_types_64.h>
 # endif
 #endif
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index aea1d1d848c7..680cf09ed100 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -65,6 +65,7 @@
 #define X86_CR4_PCIDE	0x00020000 /* enable PCID support */
 #define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
 #define X86_CR4_SMEP	0x00100000 /* enable SMEP support */
+#define X86_CR4_SMAP	0x00200000 /* enable SMAP support */
 
 /*
  * x86-64 Task Priority Register, CR8
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index d048cad9bcad..b98c0d958ebb 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -423,7 +423,6 @@ DECLARE_INIT_PER_CPU(irq_stack_union);
 
 DECLARE_PER_CPU(char *, irq_stack_ptr);
 DECLARE_PER_CPU(unsigned int, irq_count);
-extern unsigned long kernel_eflags;
 extern asmlinkage void ignore_sysret(void);
 #else	/* X86_64 */
 #ifdef CONFIG_CC_STACKPROTECTOR
@@ -759,6 +758,8 @@ static inline void update_debugctlmsr(unsigned long debugctlmsr)
 	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
 }
 
+extern void set_task_blockstep(struct task_struct *task, bool on);
+
 /*
  * from system description table in BIOS. Mostly for MCA use, but
  * others may find it useful:
diff --git a/arch/x86/include/asm/rcu.h b/arch/x86/include/asm/rcu.h
new file mode 100644
index 000000000000..d1ac07a23979
--- /dev/null
+++ b/arch/x86/include/asm/rcu.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_X86_RCU_H
+#define _ASM_X86_RCU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/rcupdate.h>
+#include <asm/ptrace.h>
+
+static inline void exception_enter(struct pt_regs *regs)
+{
+	rcu_user_exit();
+}
+
+static inline void exception_exit(struct pt_regs *regs)
+{
+#ifdef CONFIG_RCU_USER_QS
+	if (user_mode(regs))
+		rcu_user_enter();
+#endif
+}
+
+#else /* __ASSEMBLY__ */
+
+#ifdef CONFIG_RCU_USER_QS
+# define SCHEDULE_USER call schedule_user
+#else
+# define SCHEDULE_USER call schedule
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/x86/include/asm/seccomp.h b/arch/x86/include/asm/seccomp.h
index c62e58a5a90d..0f3d7f099224 100644
--- a/arch/x86/include/asm/seccomp.h
+++ b/arch/x86/include/asm/seccomp.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_X86_32
-# include "seccomp_32.h"
+# include <asm/seccomp_32.h>
 #else
-# include "seccomp_64.h"
+# include <asm/seccomp_64.h>
 #endif
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
index 598457cbd0f8..323973f4abf1 100644
--- a/arch/x86/include/asm/signal.h
+++ b/arch/x86/include/asm/signal.h
@@ -31,6 +31,10 @@ typedef struct {
 	unsigned long sig[_NSIG_WORDS];
 } sigset_t;
 
+#ifndef CONFIG_COMPAT
+typedef sigset_t compat_sigset_t;
+#endif
+
 #else
 /* Here we must cater to libcs that poke about in kernel headers.  */
 
diff --git a/arch/x86/include/asm/smap.h b/arch/x86/include/asm/smap.h
new file mode 100644
index 000000000000..8d3120f4e270
--- /dev/null
+++ b/arch/x86/include/asm/smap.h
@@ -0,0 +1,91 @@
+/*
+ * Supervisor Mode Access Prevention support
+ *
+ * Copyright (C) 2012 Intel Corporation
+ * Author: H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef _ASM_X86_SMAP_H
+#define _ASM_X86_SMAP_H
+
+#include <linux/stringify.h>
+#include <asm/nops.h>
+#include <asm/cpufeature.h>
+
+/* "Raw" instruction opcodes */
+#define __ASM_CLAC	.byte 0x0f,0x01,0xca
+#define __ASM_STAC	.byte 0x0f,0x01,0xcb
+
+#ifdef __ASSEMBLY__
+
+#include <asm/alternative-asm.h>
+
+#ifdef CONFIG_X86_SMAP
+
+#define ASM_CLAC							\
+	661: ASM_NOP3 ;							\
+	.pushsection .altinstr_replacement, "ax" ;			\
+	662: __ASM_CLAC ;						\
+	.popsection ;							\
+	.pushsection .altinstructions, "a" ;				\
+	altinstruction_entry 661b, 662b, X86_FEATURE_SMAP, 3, 3 ;	\
+	.popsection
+
+#define ASM_STAC							\
+	661: ASM_NOP3 ;							\
+	.pushsection .altinstr_replacement, "ax" ;			\
+	662: __ASM_STAC ;						\
+	.popsection ;							\
+	.pushsection .altinstructions, "a" ;				\
+	altinstruction_entry 661b, 662b, X86_FEATURE_SMAP, 3, 3 ;	\
+	.popsection
+
+#else /* CONFIG_X86_SMAP */
+
+#define ASM_CLAC
+#define ASM_STAC
+
+#endif /* CONFIG_X86_SMAP */
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/alternative.h>
+
+#ifdef CONFIG_X86_SMAP
+
+static __always_inline void clac(void)
+{
+	/* Note: a barrier is implicit in alternative() */
+	alternative(ASM_NOP3, __stringify(__ASM_CLAC), X86_FEATURE_SMAP);
+}
+
+static __always_inline void stac(void)
+{
+	/* Note: a barrier is implicit in alternative() */
+	alternative(ASM_NOP3, __stringify(__ASM_STAC), X86_FEATURE_SMAP);
+}
+
+/* These macros can be used in asm() statements */
+#define ASM_CLAC \
+	ALTERNATIVE(ASM_NOP3, __stringify(__ASM_CLAC), X86_FEATURE_SMAP)
+#define ASM_STAC \
+	ALTERNATIVE(ASM_NOP3, __stringify(__ASM_STAC), X86_FEATURE_SMAP)
+
+#else /* CONFIG_X86_SMAP */
+
+static inline void clac(void) { }
+static inline void stac(void) { }
+
+#define ASM_CLAC
+#define ASM_STAC
+
+#endif /* CONFIG_X86_SMAP */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_SMAP_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b315a33867f2..33692eaabab5 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -12,8 +12,7 @@
  * Simple spin lock operations.  There are two variants, one clears IRQ's
  * on the local processor, one does not.
  *
- * These are fair FIFO ticket locks, which are currently limited to 256
- * CPUs.
+ * These are fair FIFO ticket locks, which support up to 2^16 CPUs.
  *
  * (the type definitions are in asm/spinlock_types.h)
  */
diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h
index 6dfd6d9373a0..09224d7a5862 100644
--- a/arch/x86/include/asm/string.h
+++ b/arch/x86/include/asm/string.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_X86_32
-# include "string_32.h"
+# include <asm/string_32.h>
 #else
-# include "string_64.h"
+# include <asm/string_64.h>
 #endif
diff --git a/arch/x86/include/asm/suspend.h b/arch/x86/include/asm/suspend.h
index 9bd521fe4570..2fab6c2c3575 100644
--- a/arch/x86/include/asm/suspend.h
+++ b/arch/x86/include/asm/suspend.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_X86_32
-# include "suspend_32.h"
+# include <asm/suspend_32.h>
 #else
-# include "suspend_64.h"
+# include <asm/suspend_64.h>
 #endif
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index f2b83bc7d784..cdf5674dd23a 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -1,6 +1,135 @@
 #ifndef __SVM_H
 #define __SVM_H
 
+#define SVM_EXIT_READ_CR0      0x000
+#define SVM_EXIT_READ_CR3      0x003
+#define SVM_EXIT_READ_CR4      0x004
+#define SVM_EXIT_READ_CR8      0x008
+#define SVM_EXIT_WRITE_CR0     0x010
+#define SVM_EXIT_WRITE_CR3     0x013
+#define SVM_EXIT_WRITE_CR4     0x014
+#define SVM_EXIT_WRITE_CR8     0x018
+#define SVM_EXIT_READ_DR0      0x020
+#define SVM_EXIT_READ_DR1      0x021
+#define SVM_EXIT_READ_DR2      0x022
+#define SVM_EXIT_READ_DR3      0x023
+#define SVM_EXIT_READ_DR4      0x024
+#define SVM_EXIT_READ_DR5      0x025
+#define SVM_EXIT_READ_DR6      0x026
+#define SVM_EXIT_READ_DR7      0x027
+#define SVM_EXIT_WRITE_DR0     0x030
+#define SVM_EXIT_WRITE_DR1     0x031
+#define SVM_EXIT_WRITE_DR2     0x032
+#define SVM_EXIT_WRITE_DR3     0x033
+#define SVM_EXIT_WRITE_DR4     0x034
+#define SVM_EXIT_WRITE_DR5     0x035
+#define SVM_EXIT_WRITE_DR6     0x036
+#define SVM_EXIT_WRITE_DR7     0x037
+#define SVM_EXIT_EXCP_BASE     0x040
+#define SVM_EXIT_INTR          0x060
+#define SVM_EXIT_NMI           0x061
+#define SVM_EXIT_SMI           0x062
+#define SVM_EXIT_INIT          0x063
+#define SVM_EXIT_VINTR         0x064
+#define SVM_EXIT_CR0_SEL_WRITE 0x065
+#define SVM_EXIT_IDTR_READ     0x066
+#define SVM_EXIT_GDTR_READ     0x067
+#define SVM_EXIT_LDTR_READ     0x068
+#define SVM_EXIT_TR_READ       0x069
+#define SVM_EXIT_IDTR_WRITE    0x06a
+#define SVM_EXIT_GDTR_WRITE    0x06b
+#define SVM_EXIT_LDTR_WRITE    0x06c
+#define SVM_EXIT_TR_WRITE      0x06d
+#define SVM_EXIT_RDTSC         0x06e
+#define SVM_EXIT_RDPMC         0x06f
+#define SVM_EXIT_PUSHF         0x070
+#define SVM_EXIT_POPF          0x071
+#define SVM_EXIT_CPUID         0x072
+#define SVM_EXIT_RSM           0x073
+#define SVM_EXIT_IRET          0x074
+#define SVM_EXIT_SWINT         0x075
+#define SVM_EXIT_INVD          0x076
+#define SVM_EXIT_PAUSE         0x077
+#define SVM_EXIT_HLT           0x078
+#define SVM_EXIT_INVLPG        0x079
+#define SVM_EXIT_INVLPGA       0x07a
+#define SVM_EXIT_IOIO          0x07b
+#define SVM_EXIT_MSR           0x07c
+#define SVM_EXIT_TASK_SWITCH   0x07d
+#define SVM_EXIT_FERR_FREEZE   0x07e
+#define SVM_EXIT_SHUTDOWN      0x07f
+#define SVM_EXIT_VMRUN         0x080
+#define SVM_EXIT_VMMCALL       0x081
+#define SVM_EXIT_VMLOAD        0x082
+#define SVM_EXIT_VMSAVE        0x083
+#define SVM_EXIT_STGI          0x084
+#define SVM_EXIT_CLGI          0x085
+#define SVM_EXIT_SKINIT        0x086
+#define SVM_EXIT_RDTSCP        0x087
+#define SVM_EXIT_ICEBP         0x088
+#define SVM_EXIT_WBINVD        0x089
+#define SVM_EXIT_MONITOR       0x08a
+#define SVM_EXIT_MWAIT         0x08b
+#define SVM_EXIT_MWAIT_COND    0x08c
+#define SVM_EXIT_XSETBV        0x08d
+#define SVM_EXIT_NPF           0x400
+
+#define SVM_EXIT_ERR           -1
+
+#define SVM_EXIT_REASONS \
+	{ SVM_EXIT_READ_CR0,    "read_cr0" }, \
+	{ SVM_EXIT_READ_CR3,    "read_cr3" }, \
+	{ SVM_EXIT_READ_CR4,    "read_cr4" }, \
+	{ SVM_EXIT_READ_CR8,    "read_cr8" }, \
+	{ SVM_EXIT_WRITE_CR0,   "write_cr0" }, \
+	{ SVM_EXIT_WRITE_CR3,   "write_cr3" }, \
+	{ SVM_EXIT_WRITE_CR4,   "write_cr4" }, \
+	{ SVM_EXIT_WRITE_CR8,   "write_cr8" }, \
+	{ SVM_EXIT_READ_DR0,    "read_dr0" }, \
+	{ SVM_EXIT_READ_DR1,    "read_dr1" }, \
+	{ SVM_EXIT_READ_DR2,    "read_dr2" }, \
+	{ SVM_EXIT_READ_DR3,    "read_dr3" }, \
+	{ SVM_EXIT_WRITE_DR0,   "write_dr0" }, \
+	{ SVM_EXIT_WRITE_DR1,   "write_dr1" }, \
+	{ SVM_EXIT_WRITE_DR2,   "write_dr2" }, \
+	{ SVM_EXIT_WRITE_DR3,   "write_dr3" }, \
+	{ SVM_EXIT_WRITE_DR5,   "write_dr5" }, \
+	{ SVM_EXIT_WRITE_DR7,   "write_dr7" }, \
+	{ SVM_EXIT_EXCP_BASE + DB_VECTOR,       "DB excp" }, \
+	{ SVM_EXIT_EXCP_BASE + BP_VECTOR,       "BP excp" }, \
+	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,       "UD excp" }, \
+	{ SVM_EXIT_EXCP_BASE + PF_VECTOR,       "PF excp" }, \
+	{ SVM_EXIT_EXCP_BASE + NM_VECTOR,       "NM excp" }, \
+	{ SVM_EXIT_EXCP_BASE + MC_VECTOR,       "MC excp" }, \
+	{ SVM_EXIT_INTR,        "interrupt" }, \
+	{ SVM_EXIT_NMI,         "nmi" }, \
+	{ SVM_EXIT_SMI,         "smi" }, \
+	{ SVM_EXIT_INIT,        "init" }, \
+	{ SVM_EXIT_VINTR,       "vintr" }, \
+	{ SVM_EXIT_CPUID,       "cpuid" }, \
+	{ SVM_EXIT_INVD,        "invd" }, \
+	{ SVM_EXIT_HLT,         "hlt" }, \
+	{ SVM_EXIT_INVLPG,      "invlpg" }, \
+	{ SVM_EXIT_INVLPGA,     "invlpga" }, \
+	{ SVM_EXIT_IOIO,        "io" }, \
+	{ SVM_EXIT_MSR,         "msr" }, \
+	{ SVM_EXIT_TASK_SWITCH, "task_switch" }, \
+	{ SVM_EXIT_SHUTDOWN,    "shutdown" }, \
+	{ SVM_EXIT_VMRUN,       "vmrun" }, \
+	{ SVM_EXIT_VMMCALL,     "hypercall" }, \
+	{ SVM_EXIT_VMLOAD,      "vmload" }, \
+	{ SVM_EXIT_VMSAVE,      "vmsave" }, \
+	{ SVM_EXIT_STGI,        "stgi" }, \
+	{ SVM_EXIT_CLGI,        "clgi" }, \
+	{ SVM_EXIT_SKINIT,      "skinit" }, \
+	{ SVM_EXIT_WBINVD,      "wbinvd" }, \
+	{ SVM_EXIT_MONITOR,     "monitor" }, \
+	{ SVM_EXIT_MWAIT,       "mwait" }, \
+	{ SVM_EXIT_XSETBV,      "xsetbv" }, \
+	{ SVM_EXIT_NPF,         "npf" }
+
+#ifdef __KERNEL__
+
 enum {
 	INTERCEPT_INTR,
 	INTERCEPT_NMI,
@@ -264,81 +393,6 @@ struct __attribute__ ((__packed__)) vmcb {
 
 #define SVM_EXITINFO_REG_MASK 0x0F
 
-#define	SVM_EXIT_READ_CR0 	0x000
-#define	SVM_EXIT_READ_CR3 	0x003
-#define	SVM_EXIT_READ_CR4 	0x004
-#define	SVM_EXIT_READ_CR8 	0x008
-#define	SVM_EXIT_WRITE_CR0 	0x010
-#define	SVM_EXIT_WRITE_CR3 	0x013
-#define	SVM_EXIT_WRITE_CR4 	0x014
-#define	SVM_EXIT_WRITE_CR8 	0x018
-#define	SVM_EXIT_READ_DR0 	0x020
-#define	SVM_EXIT_READ_DR1 	0x021
-#define	SVM_EXIT_READ_DR2 	0x022
-#define	SVM_EXIT_READ_DR3 	0x023
-#define	SVM_EXIT_READ_DR4 	0x024
-#define	SVM_EXIT_READ_DR5 	0x025
-#define	SVM_EXIT_READ_DR6 	0x026
-#define	SVM_EXIT_READ_DR7 	0x027
-#define	SVM_EXIT_WRITE_DR0 	0x030
-#define	SVM_EXIT_WRITE_DR1 	0x031
-#define	SVM_EXIT_WRITE_DR2 	0x032
-#define	SVM_EXIT_WRITE_DR3 	0x033
-#define	SVM_EXIT_WRITE_DR4 	0x034
-#define	SVM_EXIT_WRITE_DR5 	0x035
-#define	SVM_EXIT_WRITE_DR6 	0x036
-#define	SVM_EXIT_WRITE_DR7 	0x037
-#define SVM_EXIT_EXCP_BASE      0x040
-#define SVM_EXIT_INTR		0x060
-#define SVM_EXIT_NMI		0x061
-#define SVM_EXIT_SMI		0x062
-#define SVM_EXIT_INIT		0x063
-#define SVM_EXIT_VINTR		0x064
-#define SVM_EXIT_CR0_SEL_WRITE	0x065
-#define SVM_EXIT_IDTR_READ	0x066
-#define SVM_EXIT_GDTR_READ	0x067
-#define SVM_EXIT_LDTR_READ	0x068
-#define SVM_EXIT_TR_READ	0x069
-#define SVM_EXIT_IDTR_WRITE	0x06a
-#define SVM_EXIT_GDTR_WRITE	0x06b
-#define SVM_EXIT_LDTR_WRITE	0x06c
-#define SVM_EXIT_TR_WRITE	0x06d
-#define SVM_EXIT_RDTSC		0x06e
-#define SVM_EXIT_RDPMC		0x06f
-#define SVM_EXIT_PUSHF		0x070
-#define SVM_EXIT_POPF		0x071
-#define SVM_EXIT_CPUID		0x072
-#define SVM_EXIT_RSM		0x073
-#define SVM_EXIT_IRET		0x074
-#define SVM_EXIT_SWINT		0x075
-#define SVM_EXIT_INVD		0x076
-#define SVM_EXIT_PAUSE		0x077
-#define SVM_EXIT_HLT		0x078
-#define SVM_EXIT_INVLPG		0x079
-#define SVM_EXIT_INVLPGA	0x07a
-#define SVM_EXIT_IOIO		0x07b
-#define SVM_EXIT_MSR		0x07c
-#define SVM_EXIT_TASK_SWITCH	0x07d
-#define SVM_EXIT_FERR_FREEZE	0x07e
-#define SVM_EXIT_SHUTDOWN	0x07f
-#define SVM_EXIT_VMRUN		0x080
-#define SVM_EXIT_VMMCALL	0x081
-#define SVM_EXIT_VMLOAD		0x082
-#define SVM_EXIT_VMSAVE		0x083
-#define SVM_EXIT_STGI		0x084
-#define SVM_EXIT_CLGI		0x085
-#define SVM_EXIT_SKINIT		0x086
-#define SVM_EXIT_RDTSCP		0x087
-#define SVM_EXIT_ICEBP		0x088
-#define SVM_EXIT_WBINVD		0x089
-#define SVM_EXIT_MONITOR	0x08a
-#define SVM_EXIT_MWAIT		0x08b
-#define SVM_EXIT_MWAIT_COND	0x08c
-#define SVM_EXIT_XSETBV		0x08d
-#define SVM_EXIT_NPF  		0x400
-
-#define SVM_EXIT_ERR		-1
-
 #define SVM_CR0_SELECTIVE_MASK (X86_CR0_TS | X86_CR0_MP)
 
 #define SVM_VMLOAD ".byte 0x0f, 0x01, 0xda"
@@ -350,3 +404,4 @@ struct __attribute__ ((__packed__)) vmcb {
 
 #endif
 
+#endif
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index 3fda9db48819..4ca1c611b552 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -40,7 +40,7 @@ asmlinkage long sys32_sigaction(int, struct old_sigaction32 __user *,
 				struct old_sigaction32 __user *);
 asmlinkage long sys32_alarm(unsigned int);
 
-asmlinkage long sys32_waitpid(compat_pid_t, unsigned int *, int);
+asmlinkage long sys32_waitpid(compat_pid_t, unsigned int __user *, int);
 asmlinkage long sys32_sysfs(int, u32, u32);
 
 asmlinkage long sys32_sched_rr_get_interval(compat_pid_t,
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 89f794f007ec..c535d847e3b5 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -89,6 +89,7 @@ struct thread_info {
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* IA32 compatibility process */
 #define TIF_FORK		18	/* ret_from_fork */
+#define TIF_NOHZ		19	/* in adaptive nohz mode */
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
 #define TIF_DEBUG		21	/* uses debug registers */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
@@ -114,6 +115,7 @@ struct thread_info {
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
+#define _TIF_NOHZ		(1 << TIF_NOHZ)
 #define _TIF_DEBUG		(1 << TIF_DEBUG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
@@ -126,12 +128,13 @@ struct thread_info {
 /* work to do in syscall_trace_enter() */
 #define _TIF_WORK_SYSCALL_ENTRY	\
 	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |	\
-	 _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT)
+	 _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT |	\
+	 _TIF_NOHZ)
 
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	\
 	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP |	\
-	 _TIF_SYSCALL_TRACEPOINT)
+	 _TIF_SYSCALL_TRACEPOINT | _TIF_NOHZ)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK							\
@@ -141,7 +144,8 @@ struct thread_info {
 
 /* work to do on any return to user space */
 #define _TIF_ALLWORK_MASK						\
-	((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT)
+	((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT |	\
+	_TIF_NOHZ)
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index e1f3a17034fc..7ccf8d131535 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -9,6 +9,7 @@
 #include <linux/string.h>
 #include <asm/asm.h>
 #include <asm/page.h>
+#include <asm/smap.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -192,9 +193,10 @@ extern int __get_user_bad(void);
 
 #ifdef CONFIG_X86_32
 #define __put_user_asm_u64(x, addr, err, errret)			\
-	asm volatile("1:	movl %%eax,0(%2)\n"			\
+	asm volatile(ASM_STAC "\n"					\
+		     "1:	movl %%eax,0(%2)\n"			\
 		     "2:	movl %%edx,4(%2)\n"			\
-		     "3:\n"						\
+		     "3: " ASM_CLAC "\n"				\
 		     ".section .fixup,\"ax\"\n"				\
 		     "4:	movl %3,%0\n"				\
 		     "	jmp 3b\n"					\
@@ -205,9 +207,10 @@ extern int __get_user_bad(void);
 		     : "A" (x), "r" (addr), "i" (errret), "0" (err))
 
 #define __put_user_asm_ex_u64(x, addr)					\
-	asm volatile("1:	movl %%eax,0(%1)\n"			\
+	asm volatile(ASM_STAC "\n"					\
+		     "1:	movl %%eax,0(%1)\n"			\
 		     "2:	movl %%edx,4(%1)\n"			\
-		     "3:\n"						\
+		     "3: " ASM_CLAC "\n"				\
 		     _ASM_EXTABLE_EX(1b, 2b)				\
 		     _ASM_EXTABLE_EX(2b, 3b)				\
 		     : : "A" (x), "r" (addr))
@@ -379,8 +382,9 @@ do {									\
 } while (0)
 
 #define __get_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
-	asm volatile("1:	mov"itype" %2,%"rtype"1\n"		\
-		     "2:\n"						\
+	asm volatile(ASM_STAC "\n"					\
+		     "1:	mov"itype" %2,%"rtype"1\n"		\
+		     "2: " ASM_CLAC "\n"				\
 		     ".section .fixup,\"ax\"\n"				\
 		     "3:	mov %3,%0\n"				\
 		     "	xor"itype" %"rtype"1,%"rtype"1\n"		\
@@ -443,8 +447,9 @@ struct __large_struct { unsigned long buf[100]; };
  * aliasing issues.
  */
 #define __put_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
-	asm volatile("1:	mov"itype" %"rtype"1,%2\n"		\
-		     "2:\n"						\
+	asm volatile(ASM_STAC "\n"					\
+		     "1:	mov"itype" %"rtype"1,%2\n"		\
+		     "2: " ASM_CLAC "\n"				\
 		     ".section .fixup,\"ax\"\n"				\
 		     "3:	mov %3,%0\n"				\
 		     "	jmp 2b\n"					\
@@ -463,13 +468,13 @@ struct __large_struct { unsigned long buf[100]; };
  * uaccess_try and catch
  */
 #define uaccess_try	do {						\
-	int prev_err = current_thread_info()->uaccess_err;		\
 	current_thread_info()->uaccess_err = 0;				\
+	stac();								\
 	barrier();
 
 #define uaccess_catch(err)						\
+	clac();								\
 	(err) |= (current_thread_info()->uaccess_err ? -EFAULT : 0);	\
-	current_thread_info()->uaccess_err = prev_err;			\
 } while (0)
 
 /**
@@ -569,6 +574,9 @@ strncpy_from_user(char *dst, const char __user *src, long count);
 extern __must_check long strlen_user(const char __user *str);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
+unsigned long __must_check clear_user(void __user *mem, unsigned long len);
+unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
+
 /*
  * movsl can be slow when source and dest are not both 8-byte aligned
  */
@@ -581,9 +589,9 @@ extern struct movsl_mask {
 #define ARCH_HAS_NOCACHE_UACCESS 1
 
 #ifdef CONFIG_X86_32
-# include "uaccess_32.h"
+# include <asm/uaccess_32.h>
 #else
-# include "uaccess_64.h"
+# include <asm/uaccess_64.h>
 #endif
 
 #endif /* _ASM_X86_UACCESS_H */
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 576e39bca6ad..7f760a9f1f61 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -213,7 +213,4 @@ static inline unsigned long __must_check copy_from_user(void *to,
 	return n;
 }
 
-unsigned long __must_check clear_user(void __user *mem, unsigned long len);
-unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
-
 #endif /* _ASM_X86_UACCESS_32_H */
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index d8def8b3dba0..142810c457dc 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -217,9 +217,6 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 	}
 }
 
-__must_check unsigned long clear_user(void __user *mem, unsigned long len);
-__must_check unsigned long __clear_user(void __user *mem, unsigned long len);
-
 static __must_check __always_inline int
 __copy_from_user_inatomic(void *dst, const void __user *src, unsigned size)
 {
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index f3971bbcd1de..8ff8be7835ab 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -42,10 +42,11 @@ struct arch_uprobe {
 };
 
 struct arch_uprobe_task {
-	unsigned long			saved_trap_nr;
 #ifdef CONFIG_X86_64
 	unsigned long			saved_scratch_register;
 #endif
+	unsigned int			saved_trap_nr;
+	unsigned int			saved_tf;
 };
 
 extern int  arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long addr);
diff --git a/arch/x86/include/asm/user.h b/arch/x86/include/asm/user.h
index 24532c7da3d6..ccab4af1646d 100644
--- a/arch/x86/include/asm/user.h
+++ b/arch/x86/include/asm/user.h
@@ -2,9 +2,9 @@
 #define _ASM_X86_USER_H
 
 #ifdef CONFIG_X86_32
-# include "user_32.h"
+# include <asm/user_32.h>
 #else
-# include "user_64.h"
+# include <asm/user_64.h>
 #endif
 
 #include <asm/types.h>
diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h
index bb0522850b74..fddb53d63915 100644
--- a/arch/x86/include/asm/vdso.h
+++ b/arch/x86/include/asm/vdso.h
@@ -11,7 +11,8 @@ extern const char VDSO32_PRELINK[];
 #define VDSO32_SYMBOL(base, name)					\
 ({									\
 	extern const char VDSO32_##name[];				\
-	(void *)(VDSO32_##name - VDSO32_PRELINK + (unsigned long)(base)); \
+	(void __user *)(VDSO32_##name - VDSO32_PRELINK +		\
+			(unsigned long)(base));				\
 })
 #endif
 
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 74fcb963595b..36ec21c36d68 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -25,6 +25,88 @@
  *
  */
 
+#define VMX_EXIT_REASONS_FAILED_VMENTRY         0x80000000
+
+#define EXIT_REASON_EXCEPTION_NMI       0
+#define EXIT_REASON_EXTERNAL_INTERRUPT  1
+#define EXIT_REASON_TRIPLE_FAULT        2
+
+#define EXIT_REASON_PENDING_INTERRUPT   7
+#define EXIT_REASON_NMI_WINDOW          8
+#define EXIT_REASON_TASK_SWITCH         9
+#define EXIT_REASON_CPUID               10
+#define EXIT_REASON_HLT                 12
+#define EXIT_REASON_INVD                13
+#define EXIT_REASON_INVLPG              14
+#define EXIT_REASON_RDPMC               15
+#define EXIT_REASON_RDTSC               16
+#define EXIT_REASON_VMCALL              18
+#define EXIT_REASON_VMCLEAR             19
+#define EXIT_REASON_VMLAUNCH            20
+#define EXIT_REASON_VMPTRLD             21
+#define EXIT_REASON_VMPTRST             22
+#define EXIT_REASON_VMREAD              23
+#define EXIT_REASON_VMRESUME            24
+#define EXIT_REASON_VMWRITE             25
+#define EXIT_REASON_VMOFF               26
+#define EXIT_REASON_VMON                27
+#define EXIT_REASON_CR_ACCESS           28
+#define EXIT_REASON_DR_ACCESS           29
+#define EXIT_REASON_IO_INSTRUCTION      30
+#define EXIT_REASON_MSR_READ            31
+#define EXIT_REASON_MSR_WRITE           32
+#define EXIT_REASON_INVALID_STATE       33
+#define EXIT_REASON_MWAIT_INSTRUCTION   36
+#define EXIT_REASON_MONITOR_INSTRUCTION 39
+#define EXIT_REASON_PAUSE_INSTRUCTION   40
+#define EXIT_REASON_MCE_DURING_VMENTRY  41
+#define EXIT_REASON_TPR_BELOW_THRESHOLD 43
+#define EXIT_REASON_APIC_ACCESS         44
+#define EXIT_REASON_EPT_VIOLATION       48
+#define EXIT_REASON_EPT_MISCONFIG       49
+#define EXIT_REASON_WBINVD              54
+#define EXIT_REASON_XSETBV              55
+#define EXIT_REASON_INVPCID             58
+
+#define VMX_EXIT_REASONS \
+	{ EXIT_REASON_EXCEPTION_NMI,         "EXCEPTION_NMI" }, \
+	{ EXIT_REASON_EXTERNAL_INTERRUPT,    "EXTERNAL_INTERRUPT" }, \
+	{ EXIT_REASON_TRIPLE_FAULT,          "TRIPLE_FAULT" }, \
+	{ EXIT_REASON_PENDING_INTERRUPT,     "PENDING_INTERRUPT" }, \
+	{ EXIT_REASON_NMI_WINDOW,            "NMI_WINDOW" }, \
+	{ EXIT_REASON_TASK_SWITCH,           "TASK_SWITCH" }, \
+	{ EXIT_REASON_CPUID,                 "CPUID" }, \
+	{ EXIT_REASON_HLT,                   "HLT" }, \
+	{ EXIT_REASON_INVLPG,                "INVLPG" }, \
+	{ EXIT_REASON_RDPMC,                 "RDPMC" }, \
+	{ EXIT_REASON_RDTSC,                 "RDTSC" }, \
+	{ EXIT_REASON_VMCALL,                "VMCALL" }, \
+	{ EXIT_REASON_VMCLEAR,               "VMCLEAR" }, \
+	{ EXIT_REASON_VMLAUNCH,              "VMLAUNCH" }, \
+	{ EXIT_REASON_VMPTRLD,               "VMPTRLD" }, \
+	{ EXIT_REASON_VMPTRST,               "VMPTRST" }, \
+	{ EXIT_REASON_VMREAD,                "VMREAD" }, \
+	{ EXIT_REASON_VMRESUME,              "VMRESUME" }, \
+	{ EXIT_REASON_VMWRITE,               "VMWRITE" }, \
+	{ EXIT_REASON_VMOFF,                 "VMOFF" }, \
+	{ EXIT_REASON_VMON,                  "VMON" }, \
+	{ EXIT_REASON_CR_ACCESS,             "CR_ACCESS" }, \
+	{ EXIT_REASON_DR_ACCESS,             "DR_ACCESS" }, \
+	{ EXIT_REASON_IO_INSTRUCTION,        "IO_INSTRUCTION" }, \
+	{ EXIT_REASON_MSR_READ,              "MSR_READ" }, \
+	{ EXIT_REASON_MSR_WRITE,             "MSR_WRITE" }, \
+	{ EXIT_REASON_MWAIT_INSTRUCTION,     "MWAIT_INSTRUCTION" }, \
+	{ EXIT_REASON_MONITOR_INSTRUCTION,   "MONITOR_INSTRUCTION" }, \
+	{ EXIT_REASON_PAUSE_INSTRUCTION,     "PAUSE_INSTRUCTION" }, \
+	{ EXIT_REASON_MCE_DURING_VMENTRY,    "MCE_DURING_VMENTRY" }, \
+	{ EXIT_REASON_TPR_BELOW_THRESHOLD,   "TPR_BELOW_THRESHOLD" }, \
+	{ EXIT_REASON_APIC_ACCESS,           "APIC_ACCESS" }, \
+	{ EXIT_REASON_EPT_VIOLATION,         "EPT_VIOLATION" }, \
+	{ EXIT_REASON_EPT_MISCONFIG,         "EPT_MISCONFIG" }, \
+	{ EXIT_REASON_WBINVD,                "WBINVD" }
+
+#ifdef __KERNEL__
+
 #include <linux/types.h>
 
 /*
@@ -241,49 +323,6 @@ enum vmcs_field {
 	HOST_RIP                        = 0x00006c16,
 };
 
-#define VMX_EXIT_REASONS_FAILED_VMENTRY         0x80000000
-
-#define EXIT_REASON_EXCEPTION_NMI       0
-#define EXIT_REASON_EXTERNAL_INTERRUPT  1
-#define EXIT_REASON_TRIPLE_FAULT        2
-
-#define EXIT_REASON_PENDING_INTERRUPT   7
-#define EXIT_REASON_NMI_WINDOW		8
-#define EXIT_REASON_TASK_SWITCH         9
-#define EXIT_REASON_CPUID               10
-#define EXIT_REASON_HLT                 12
-#define EXIT_REASON_INVD                13
-#define EXIT_REASON_INVLPG              14
-#define EXIT_REASON_RDPMC               15
-#define EXIT_REASON_RDTSC               16
-#define EXIT_REASON_VMCALL              18
-#define EXIT_REASON_VMCLEAR             19
-#define EXIT_REASON_VMLAUNCH            20
-#define EXIT_REASON_VMPTRLD             21
-#define EXIT_REASON_VMPTRST             22
-#define EXIT_REASON_VMREAD              23
-#define EXIT_REASON_VMRESUME            24
-#define EXIT_REASON_VMWRITE             25
-#define EXIT_REASON_VMOFF               26
-#define EXIT_REASON_VMON                27
-#define EXIT_REASON_CR_ACCESS           28
-#define EXIT_REASON_DR_ACCESS           29
-#define EXIT_REASON_IO_INSTRUCTION      30
-#define EXIT_REASON_MSR_READ            31
-#define EXIT_REASON_MSR_WRITE           32
-#define EXIT_REASON_INVALID_STATE	33
-#define EXIT_REASON_MWAIT_INSTRUCTION   36
-#define EXIT_REASON_MONITOR_INSTRUCTION 39
-#define EXIT_REASON_PAUSE_INSTRUCTION   40
-#define EXIT_REASON_MCE_DURING_VMENTRY	 41
-#define EXIT_REASON_TPR_BELOW_THRESHOLD 43
-#define EXIT_REASON_APIC_ACCESS         44
-#define EXIT_REASON_EPT_VIOLATION       48
-#define EXIT_REASON_EPT_MISCONFIG       49
-#define EXIT_REASON_WBINVD		54
-#define EXIT_REASON_XSETBV		55
-#define EXIT_REASON_INVPCID		58
-
 /*
  * Interruption-information format
  */
@@ -488,3 +527,5 @@ enum vm_instruction_error_number {
 };
 
 #endif
+
+#endif
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 38155f667144..57693498519c 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -81,12 +81,13 @@ struct x86_init_mapping {
 
 /**
  * struct x86_init_paging - platform specific paging functions
- * @pagetable_setup_start:	platform specific pre paging_init() call
- * @pagetable_setup_done:	platform specific post paging_init() call
+ * @pagetable_init:	platform specific paging initialization call to setup
+ *			the kernel pagetables and prepare accessors functions.
+ *			Callback must call paging_init(). Called once after the
+ *			direct mapping for phys memory is available.
  */
 struct x86_init_paging {
-	void (*pagetable_setup_start)(pgd_t *base);
-	void (*pagetable_setup_done)(pgd_t *base);
+	void (*pagetable_init)(void);
 };
 
 /**
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index cbf0c9d50b92..6d2f75a82a14 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -47,6 +47,11 @@
 #endif
 
 #ifndef __ASSEMBLY__
+/* Explicitly size integers that represent pfns in the public interface
+ * with Xen so that on ARM we can have one ABI that works for 32 and 64
+ * bit guests. */
+typedef unsigned long xen_pfn_t;
+typedef unsigned long xen_ulong_t;
 /* Guest handles for primitive C types. */
 __DEFINE_GUEST_HANDLE(uchar, unsigned char);
 __DEFINE_GUEST_HANDLE(uint,  unsigned int);
@@ -57,6 +62,7 @@ DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
 DEFINE_GUEST_HANDLE(uint64_t);
 DEFINE_GUEST_HANDLE(uint32_t);
+DEFINE_GUEST_HANDLE(xen_pfn_t);
 #endif
 
 #ifndef HYPERVISOR_VIRT_START
@@ -116,11 +122,13 @@ struct arch_shared_info {
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
-#include "interface_32.h"
+#include <asm/xen/interface_32.h>
 #else
-#include "interface_64.h"
+#include <asm/xen/interface_64.h>
 #endif
 
+#include <asm/pvclock-abi.h>
+
 #ifndef __ASSEMBLY__
 /*
  * The following is all CPU context. Note that the fpu_ctxt block is filled
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 93971e841dd5..472b9b783019 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -51,7 +51,8 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s,
 
 extern int m2p_add_override(unsigned long mfn, struct page *page,
 			    struct gnttab_map_grant_ref *kmap_op);
-extern int m2p_remove_override(struct page *page, bool clear_pte);
+extern int m2p_remove_override(struct page *page,
+				struct gnttab_map_grant_ref *kmap_op);
 extern struct page *m2p_find_override(unsigned long mfn);
 extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn);
 
diff --git a/arch/x86/include/asm/xen/swiotlb-xen.h b/arch/x86/include/asm/xen/swiotlb-xen.h
index 1be1ab7d6a41..ee52fcac6f72 100644
--- a/arch/x86/include/asm/xen/swiotlb-xen.h
+++ b/arch/x86/include/asm/xen/swiotlb-xen.h
@@ -5,10 +5,12 @@
 extern int xen_swiotlb;
 extern int __init pci_xen_swiotlb_detect(void);
 extern void __init pci_xen_swiotlb_init(void);
+extern int pci_xen_swiotlb_init_late(void);
 #else
 #define xen_swiotlb (0)
 static inline int __init pci_xen_swiotlb_detect(void) { return 0; }
 static inline void __init pci_xen_swiotlb_init(void) { }
+static inline int pci_xen_swiotlb_init_late(void) { return -ENXIO; }
 #endif
 
 #endif /* _ASM_X86_SWIOTLB_XEN_H */
diff --git a/arch/x86/include/asm/xor.h b/arch/x86/include/asm/xor.h
index 7fcf6f3dbcc3..f8fde90bc45e 100644
--- a/arch/x86/include/asm/xor.h
+++ b/arch/x86/include/asm/xor.h
@@ -3,8 +3,8 @@
 # include <asm-generic/xor.h>
 #else
 #ifdef CONFIG_X86_32
-# include "xor_32.h"
+# include <asm/xor_32.h>
 #else
-# include "xor_64.h"
+# include <asm/xor_64.h>
 #endif
 #endif
diff --git a/arch/x86/include/asm/xor_32.h b/arch/x86/include/asm/xor_32.h
index 454570891bdc..f79cb7ec0e06 100644
--- a/arch/x86/include/asm/xor_32.h
+++ b/arch/x86/include/asm/xor_32.h
@@ -534,38 +534,6 @@ static struct xor_block_template xor_block_p5_mmx = {
  * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
  */
 
-#define XMMS_SAVE				\
-do {						\
-	preempt_disable();			\
-	cr0 = read_cr0();			\
-	clts();					\
-	asm volatile(				\
-		"movups %%xmm0,(%0)	;\n\t"	\
-		"movups %%xmm1,0x10(%0)	;\n\t"	\
-		"movups %%xmm2,0x20(%0)	;\n\t"	\
-		"movups %%xmm3,0x30(%0)	;\n\t"	\
-		:				\
-		: "r" (xmm_save) 		\
-		: "memory");			\
-} while (0)
-
-#define XMMS_RESTORE				\
-do {						\
-	asm volatile(				\
-		"sfence			;\n\t"	\
-		"movups (%0),%%xmm0	;\n\t"	\
-		"movups 0x10(%0),%%xmm1	;\n\t"	\
-		"movups 0x20(%0),%%xmm2	;\n\t"	\
-		"movups 0x30(%0),%%xmm3	;\n\t"	\
-		:				\
-		: "r" (xmm_save)		\
-		: "memory");			\
-	write_cr0(cr0);				\
-	preempt_enable();			\
-} while (0)
-
-#define ALIGN16 __attribute__((aligned(16)))
-
 #define OFFS(x)		"16*("#x")"
 #define PF_OFFS(x)	"256+16*("#x")"
 #define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%1)		;\n"
@@ -587,10 +555,8 @@ static void
 xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 {
 	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	asm volatile(
 #undef BLOCK
@@ -633,7 +599,7 @@ xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 	:
 	: "memory");
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static void
@@ -641,10 +607,8 @@ xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  unsigned long *p3)
 {
 	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	asm volatile(
 #undef BLOCK
@@ -694,7 +658,7 @@ xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	:
 	: "memory" );
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static void
@@ -702,10 +666,8 @@ xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  unsigned long *p3, unsigned long *p4)
 {
 	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	asm volatile(
 #undef BLOCK
@@ -762,7 +724,7 @@ xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	:
 	: "memory" );
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static void
@@ -770,10 +732,8 @@ xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
 {
 	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	/* Make sure GCC forgets anything it knows about p4 or p5,
 	   such that it won't pass to the asm volatile below a
@@ -850,7 +810,7 @@ xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	   like assuming they have some legal value.  */
 	asm("" : "=r" (p4), "=r" (p5));
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static struct xor_block_template xor_block_pIII_sse = {
@@ -862,7 +822,7 @@ static struct xor_block_template xor_block_pIII_sse = {
 };
 
 /* Also try the AVX routines */
-#include "xor_avx.h"
+#include <asm/xor_avx.h>
 
 /* Also try the generic routines.  */
 #include <asm-generic/xor.h>
diff --git a/arch/x86/include/asm/xor_64.h b/arch/x86/include/asm/xor_64.h
index b9b2323e90fe..87ac522c4af5 100644
--- a/arch/x86/include/asm/xor_64.h
+++ b/arch/x86/include/asm/xor_64.h
@@ -34,41 +34,7 @@
  * no advantages to be gotten from x86-64 here anyways.
  */
 
-typedef struct {
-	unsigned long a, b;
-} __attribute__((aligned(16))) xmm_store_t;
-
-/* Doesn't use gcc to save the XMM registers, because there is no easy way to
-   tell it to do a clts before the register saving. */
-#define XMMS_SAVE				\
-do {						\
-	preempt_disable();			\
-	asm volatile(				\
-		"movq %%cr0,%0		;\n\t"	\
-		"clts			;\n\t"	\
-		"movups %%xmm0,(%1)	;\n\t"	\
-		"movups %%xmm1,0x10(%1)	;\n\t"	\
-		"movups %%xmm2,0x20(%1)	;\n\t"	\
-		"movups %%xmm3,0x30(%1)	;\n\t"	\
-		: "=&r" (cr0)			\
-		: "r" (xmm_save) 		\
-		: "memory");			\
-} while (0)
-
-#define XMMS_RESTORE				\
-do {						\
-	asm volatile(				\
-		"sfence			;\n\t"	\
-		"movups (%1),%%xmm0	;\n\t"	\
-		"movups 0x10(%1),%%xmm1	;\n\t"	\
-		"movups 0x20(%1),%%xmm2	;\n\t"	\
-		"movups 0x30(%1),%%xmm3	;\n\t"	\
-		"movq 	%0,%%cr0	;\n\t"	\
-		:				\
-		: "r" (cr0), "r" (xmm_save)	\
-		: "memory");			\
-	preempt_enable();			\
-} while (0)
+#include <asm/i387.h>
 
 #define OFFS(x)		"16*("#x")"
 #define PF_OFFS(x)	"256+16*("#x")"
@@ -91,10 +57,8 @@ static void
 xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 {
 	unsigned int lines = bytes >> 8;
-	unsigned long cr0;
-	xmm_store_t xmm_save[4];
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	asm volatile(
 #undef BLOCK
@@ -135,7 +99,7 @@ xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 	: [inc] "r" (256UL)
 	: "memory");
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static void
@@ -143,11 +107,8 @@ xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  unsigned long *p3)
 {
 	unsigned int lines = bytes >> 8;
-	xmm_store_t xmm_save[4];
-	unsigned long cr0;
-
-	XMMS_SAVE;
 
+	kernel_fpu_begin();
 	asm volatile(
 #undef BLOCK
 #define BLOCK(i) \
@@ -194,7 +155,7 @@ xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
 	: [inc] "r" (256UL)
 	: "memory");
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static void
@@ -202,10 +163,8 @@ xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  unsigned long *p3, unsigned long *p4)
 {
 	unsigned int lines = bytes >> 8;
-	xmm_store_t xmm_save[4];
-	unsigned long cr0;
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	asm volatile(
 #undef BLOCK
@@ -261,7 +220,7 @@ xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	: [inc] "r" (256UL)
 	: "memory" );
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static void
@@ -269,10 +228,8 @@ xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
 {
 	unsigned int lines = bytes >> 8;
-	xmm_store_t xmm_save[4];
-	unsigned long cr0;
 
-	XMMS_SAVE;
+	kernel_fpu_begin();
 
 	asm volatile(
 #undef BLOCK
@@ -336,7 +293,7 @@ xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 	: [inc] "r" (256UL)
 	: "memory");
 
-	XMMS_RESTORE;
+	kernel_fpu_end();
 }
 
 static struct xor_block_template xor_block_sse = {
@@ -349,7 +306,7 @@ static struct xor_block_template xor_block_sse = {
 
 
 /* Also try the AVX routines */
-#include "xor_avx.h"
+#include <asm/xor_avx.h>
 
 #undef XOR_TRY_TEMPLATES
 #define XOR_TRY_TEMPLATES			\
diff --git a/arch/x86/include/asm/xor_avx.h b/arch/x86/include/asm/xor_avx.h
index 2510d35f480e..7ea79c5fa1f2 100644
--- a/arch/x86/include/asm/xor_avx.h
+++ b/arch/x86/include/asm/xor_avx.h
@@ -20,32 +20,6 @@
 #include <linux/compiler.h>
 #include <asm/i387.h>
 
-#define ALIGN32 __aligned(32)
-
-#define YMM_SAVED_REGS 4
-
-#define YMMS_SAVE \
-do { \
-	preempt_disable(); \
-	cr0 = read_cr0(); \
-	clts(); \
-	asm volatile("vmovaps %%ymm0, %0" : "=m" (ymm_save[0]) : : "memory"); \
-	asm volatile("vmovaps %%ymm1, %0" : "=m" (ymm_save[32]) : : "memory"); \
-	asm volatile("vmovaps %%ymm2, %0" : "=m" (ymm_save[64]) : : "memory"); \
-	asm volatile("vmovaps %%ymm3, %0" : "=m" (ymm_save[96]) : : "memory"); \
-} while (0);
-
-#define YMMS_RESTORE \
-do { \
-	asm volatile("sfence" : : : "memory"); \
-	asm volatile("vmovaps %0, %%ymm3" : : "m" (ymm_save[96])); \
-	asm volatile("vmovaps %0, %%ymm2" : : "m" (ymm_save[64])); \
-	asm volatile("vmovaps %0, %%ymm1" : : "m" (ymm_save[32])); \
-	asm volatile("vmovaps %0, %%ymm0" : : "m" (ymm_save[0])); \
-	write_cr0(cr0); \
-	preempt_enable(); \
-} while (0);
-
 #define BLOCK4(i) \
 		BLOCK(32 * i, 0) \
 		BLOCK(32 * (i + 1), 1) \
@@ -60,10 +34,9 @@ do { \
 
 static void xor_avx_2(unsigned long bytes, unsigned long *p0, unsigned long *p1)
 {
-	unsigned long cr0, lines = bytes >> 9;
-	char ymm_save[32 * YMM_SAVED_REGS] ALIGN32;
+	unsigned long lines = bytes >> 9;
 
-	YMMS_SAVE
+	kernel_fpu_begin();
 
 	while (lines--) {
 #undef BLOCK
@@ -82,16 +55,15 @@ do { \
 		p1 = (unsigned long *)((uintptr_t)p1 + 512);
 	}
 
-	YMMS_RESTORE
+	kernel_fpu_end();
 }
 
 static void xor_avx_3(unsigned long bytes, unsigned long *p0, unsigned long *p1,
 	unsigned long *p2)
 {
-	unsigned long cr0, lines = bytes >> 9;
-	char ymm_save[32 * YMM_SAVED_REGS] ALIGN32;
+	unsigned long lines = bytes >> 9;
 
-	YMMS_SAVE
+	kernel_fpu_begin();
 
 	while (lines--) {
 #undef BLOCK
@@ -113,16 +85,15 @@ do { \
 		p2 = (unsigned long *)((uintptr_t)p2 + 512);
 	}
 
-	YMMS_RESTORE
+	kernel_fpu_end();
 }
 
 static void xor_avx_4(unsigned long bytes, unsigned long *p0, unsigned long *p1,
 	unsigned long *p2, unsigned long *p3)
 {
-	unsigned long cr0, lines = bytes >> 9;
-	char ymm_save[32 * YMM_SAVED_REGS] ALIGN32;
+	unsigned long lines = bytes >> 9;
 
-	YMMS_SAVE
+	kernel_fpu_begin();
 
 	while (lines--) {
 #undef BLOCK
@@ -147,16 +118,15 @@ do { \
 		p3 = (unsigned long *)((uintptr_t)p3 + 512);
 	}
 
-	YMMS_RESTORE
+	kernel_fpu_end();
 }
 
 static void xor_avx_5(unsigned long bytes, unsigned long *p0, unsigned long *p1,
 	unsigned long *p2, unsigned long *p3, unsigned long *p4)
 {
-	unsigned long cr0, lines = bytes >> 9;
-	char ymm_save[32 * YMM_SAVED_REGS] ALIGN32;
+	unsigned long lines = bytes >> 9;
 
-	YMMS_SAVE
+	kernel_fpu_begin();
 
 	while (lines--) {
 #undef BLOCK
@@ -184,7 +154,7 @@ do { \
 		p4 = (unsigned long *)((uintptr_t)p4 + 512);
 	}
 
-	YMMS_RESTORE
+	kernel_fpu_end();
 }
 
 static struct xor_block_template xor_block_avx = {
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
index 8a1b6f9b594a..0415cdabb5a6 100644
--- a/arch/x86/include/asm/xsave.h
+++ b/arch/x86/include/asm/xsave.h
@@ -34,17 +34,14 @@
 extern unsigned int xstate_size;
 extern u64 pcntxt_mask;
 extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
+extern struct xsave_struct *init_xstate_buf;
 
 extern void xsave_init(void);
 extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask);
 extern int init_fpu(struct task_struct *child);
-extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
-			    void __user *fpstate,
-			    struct _fpx_sw_bytes *sw);
 
-static inline int fpu_xrstor_checking(struct fpu *fpu)
+static inline int fpu_xrstor_checking(struct xsave_struct *fx)
 {
-	struct xsave_struct *fx = &fpu->state->xsave;
 	int err;
 
 	asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
@@ -69,13 +66,13 @@ static inline int xsave_user(struct xsave_struct __user *buf)
 	 * Clear the xsave header first, so that reserved fields are
 	 * initialized to zero.
 	 */
-	err = __clear_user(&buf->xsave_hdr,
-			   sizeof(struct xsave_hdr_struct));
+	err = __clear_user(&buf->xsave_hdr, sizeof(buf->xsave_hdr));
 	if (unlikely(err))
 		return -EFAULT;
 
-	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
-			     "2:\n"
+	__asm__ __volatile__(ASM_STAC "\n"
+			     "1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
+			     "2: " ASM_CLAC "\n"
 			     ".section .fixup,\"ax\"\n"
 			     "3:  movl $-1,%[err]\n"
 			     "    jmp  2b\n"
@@ -84,9 +81,6 @@ static inline int xsave_user(struct xsave_struct __user *buf)
 			     : [err] "=r" (err)
 			     : "D" (buf), "a" (-1), "d" (-1), "0" (0)
 			     : "memory");
-	if (unlikely(err) && __clear_user(buf, xstate_size))
-		err = -EFAULT;
-	/* No need to clear here because the caller clears USED_MATH */
 	return err;
 }
 
@@ -97,8 +91,9 @@ static inline int xrestore_user(struct xsave_struct __user *buf, u64 mask)
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
 
-	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n"
-			     "2:\n"
+	__asm__ __volatile__(ASM_STAC "\n"
+			     "1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n"
+			     "2: " ASM_CLAC "\n"
 			     ".section .fixup,\"ax\"\n"
 			     "3:  movl $-1,%[err]\n"
 			     "    jmp  2b\n"
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..83b6e9a0dce4
--- /dev/null
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -0,0 +1,6 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+genhdr-y += unistd_32.h
+genhdr-y += unistd_64.h
+genhdr-y += unistd_x32.h
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 8215e5652d97..a48ea05157d3 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -81,8 +81,7 @@ obj-$(CONFIG_DEBUG_RODATA_TEST)	+= test_rodata.o
 obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 obj-$(CONFIG_DEBUG_NMI_SELFTEST) += nmi_selftest.o
 
-obj-$(CONFIG_KVM_GUEST)		+= kvm.o
-obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
+obj-$(CONFIG_KVM_GUEST)		+= kvm.o kvmclock.o
 obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
 obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
 obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
@@ -100,6 +99,8 @@ obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb.o
 obj-$(CONFIG_OF)			+= devicetree.o
 obj-$(CONFIG_UPROBES)			+= uprobes.o
 
+obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index b2297e58c6ed..e651f7a589ac 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -656,7 +656,7 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	acpi_register_lapic(physid, ACPI_MADT_ENABLED);
 
 	/*
-	 * If mp_register_lapic successfully generates a new logical cpu
+	 * If acpi_register_lapic successfully generates a new logical cpu
 	 * number, then the following will get us exactly what was mapped
 	 */
 	cpumask_andnot(new_map, cpu_present_mask, tmp_map);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 95bf99de9058..11676cf65aee 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -25,10 +25,6 @@ unsigned long acpi_realmode_flags;
 static char temp_stack[4096];
 #endif
 
-asmlinkage void acpi_enter_s3(void)
-{
-	acpi_enter_sleep_state(3, wake_sleep_flags);
-}
 /**
  * acpi_suspend_lowlevel - save kernel state
  *
@@ -47,17 +43,22 @@ int acpi_suspend_lowlevel(void)
 
 	header->video_mode = saved_video_mode;
 
+	header->pmode_behavior = 0;
+
 #ifndef CONFIG_64BIT
 	store_gdt((struct desc_ptr *)&header->pmode_gdt);
 
-	if (rdmsr_safe(MSR_EFER, &header->pmode_efer_low,
-		       &header->pmode_efer_high))
-		header->pmode_efer_low = header->pmode_efer_high = 0;
+	if (!rdmsr_safe(MSR_EFER,
+			&header->pmode_efer_low,
+			&header->pmode_efer_high))
+		header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER);
 #endif /* !CONFIG_64BIT */
 
 	header->pmode_cr0 = read_cr0();
-	header->pmode_cr4 = read_cr4_safe();
-	header->pmode_behavior = 0;
+	if (__this_cpu_read(cpu_info.cpuid_level) >= 0) {
+		header->pmode_cr4 = read_cr4();
+		header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_CR4);
+	}
 	if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
 			&header->pmode_misc_en_low,
 			&header->pmode_misc_en_high))
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index 5653a5791ec9..67f59f8c6956 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -2,7 +2,6 @@
  *	Variables and functions used by the code in sleep.c
  */
 
-#include <linux/linkage.h>
 #include <asm/realmode.h>
 
 extern unsigned long saved_video_mode;
@@ -11,7 +10,6 @@ extern long saved_magic;
 extern int wakeup_pmode_return;
 
 extern u8 wake_sleep_flags;
-extern asmlinkage void acpi_enter_s3(void);
 
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 extern void wakeup_long64(void);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 72610839f03b..13ab720573e3 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -74,7 +74,9 @@ restore_registers:
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
-	call	acpi_enter_s3
+	pushl	$3
+	call	acpi_enter_sleep_state
+	addl	$4, %esp
 
 #	In case of S3 failure, we'll emerge here.  Jump
 # 	to ret_point to recover
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 014d1d28c397..8ea5164cbd04 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -71,7 +71,9 @@ ENTRY(do_suspend_lowlevel)
 	movq	%rsi, saved_rsi
 
 	addq	$8, %rsp
-	call	acpi_enter_s3
+	movl	$3, %edi
+	xorl	%eax, %eax
+	call	acpi_enter_sleep_state
 	/* in case something went wrong, restore the machine status and go on */
 	jmp	resume_point
 
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 931280ff8299..ef5ccca79a6c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -23,19 +23,6 @@
 
 #define MAX_PATCH_LEN (255-1)
 
-#ifdef CONFIG_HOTPLUG_CPU
-static int smp_alt_once;
-
-static int __init bootonly(char *str)
-{
-	smp_alt_once = 1;
-	return 1;
-}
-__setup("smp-alt-boot", bootonly);
-#else
-#define smp_alt_once 1
-#endif
-
 static int __initdata_or_module debug_alternative;
 
 static int __init debug_alt(char *str)
@@ -165,7 +152,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
 #endif
 
 #ifdef P6_NOP1
-static const unsigned char  __initconst_or_module p6nops[] =
+static const unsigned char p6nops[] =
 {
 	P6_NOP1,
 	P6_NOP2,
@@ -224,7 +211,7 @@ void __init arch_init_ideal_nops(void)
 			ideal_nops = intel_nops;
 #endif
 		}
-
+		break;
 	default:
 #ifdef CONFIG_X86_64
 		ideal_nops = k8_nops;
@@ -317,7 +304,7 @@ static void alternatives_smp_lock(const s32 *start, const s32 *end,
 		/* turn DS segment override prefix into lock prefix */
 		if (*ptr == 0x3e)
 			text_poke(ptr, ((unsigned char []){0xf0}), 1);
-	};
+	}
 	mutex_unlock(&text_mutex);
 }
 
@@ -326,9 +313,6 @@ static void alternatives_smp_unlock(const s32 *start, const s32 *end,
 {
 	const s32 *poff;
 
-	if (noreplace_smp)
-		return;
-
 	mutex_lock(&text_mutex);
 	for (poff = start; poff < end; poff++) {
 		u8 *ptr = (u8 *)poff + *poff;
@@ -338,7 +322,7 @@ static void alternatives_smp_unlock(const s32 *start, const s32 *end,
 		/* turn lock prefix into DS segment override prefix */
 		if (*ptr == 0xf0)
 			text_poke(ptr, ((unsigned char []){0x3E}), 1);
-	};
+	}
 	mutex_unlock(&text_mutex);
 }
 
@@ -359,7 +343,7 @@ struct smp_alt_module {
 };
 static LIST_HEAD(smp_alt_modules);
 static DEFINE_MUTEX(smp_alt);
-static int smp_mode = 1;	/* protected by smp_alt */
+static bool uniproc_patched = false;	/* protected by smp_alt */
 
 void __init_or_module alternatives_smp_module_add(struct module *mod,
 						  char *name,
@@ -368,19 +352,18 @@ void __init_or_module alternatives_smp_module_add(struct module *mod,
 {
 	struct smp_alt_module *smp;
 
-	if (noreplace_smp)
-		return;
+	mutex_lock(&smp_alt);
+	if (!uniproc_patched)
+		goto unlock;
 
-	if (smp_alt_once) {
-		if (boot_cpu_has(X86_FEATURE_UP))
-			alternatives_smp_unlock(locks, locks_end,
-						text, text_end);
-		return;
-	}
+	if (num_possible_cpus() == 1)
+		/* Don't bother remembering, we'll never have to undo it. */
+		goto smp_unlock;
 
 	smp = kzalloc(sizeof(*smp), GFP_KERNEL);
 	if (NULL == smp)
-		return; /* we'll run the (safe but slow) SMP code then ... */
+		/* we'll run the (safe but slow) SMP code then ... */
+		goto unlock;
 
 	smp->mod	= mod;
 	smp->name	= name;
@@ -392,11 +375,10 @@ void __init_or_module alternatives_smp_module_add(struct module *mod,
 		__func__, smp->locks, smp->locks_end,
 		smp->text, smp->text_end, smp->name);
 
-	mutex_lock(&smp_alt);
 	list_add_tail(&smp->next, &smp_alt_modules);
-	if (boot_cpu_has(X86_FEATURE_UP))
-		alternatives_smp_unlock(smp->locks, smp->locks_end,
-					smp->text, smp->text_end);
+smp_unlock:
+	alternatives_smp_unlock(locks, locks_end, text, text_end);
+unlock:
 	mutex_unlock(&smp_alt);
 }
 
@@ -404,24 +386,18 @@ void __init_or_module alternatives_smp_module_del(struct module *mod)
 {
 	struct smp_alt_module *item;
 
-	if (smp_alt_once || noreplace_smp)
-		return;
-
 	mutex_lock(&smp_alt);
 	list_for_each_entry(item, &smp_alt_modules, next) {
 		if (mod != item->mod)
 			continue;
 		list_del(&item->next);
-		mutex_unlock(&smp_alt);
-		DPRINTK("%s: %s\n", __func__, item->name);
 		kfree(item);
-		return;
+		break;
 	}
 	mutex_unlock(&smp_alt);
 }
 
-bool skip_smp_alternatives;
-void alternatives_smp_switch(int smp)
+void alternatives_enable_smp(void)
 {
 	struct smp_alt_module *mod;
 
@@ -436,34 +412,21 @@ void alternatives_smp_switch(int smp)
 	pr_info("lockdep: fixing up alternatives\n");
 #endif
 
-	if (noreplace_smp || smp_alt_once || skip_smp_alternatives)
-		return;
-	BUG_ON(!smp && (num_online_cpus() > 1));
+	/* Why bother if there are no other CPUs? */
+	BUG_ON(num_possible_cpus() == 1);
 
 	mutex_lock(&smp_alt);
 
-	/*
-	 * Avoid unnecessary switches because it forces JIT based VMs to
-	 * throw away all cached translations, which can be quite costly.
-	 */
-	if (smp == smp_mode) {
-		/* nothing */
-	} else if (smp) {
+	if (uniproc_patched) {
 		pr_info("switching to SMP code\n");
+		BUG_ON(num_online_cpus() != 1);
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
 		clear_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
 		list_for_each_entry(mod, &smp_alt_modules, next)
 			alternatives_smp_lock(mod->locks, mod->locks_end,
 					      mod->text, mod->text_end);
-	} else {
-		pr_info("switching to UP code\n");
-		set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
-		set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
-		list_for_each_entry(mod, &smp_alt_modules, next)
-			alternatives_smp_unlock(mod->locks, mod->locks_end,
-						mod->text, mod->text_end);
+		uniproc_patched = false;
 	}
-	smp_mode = smp;
 	mutex_unlock(&smp_alt);
 }
 
@@ -540,40 +503,22 @@ void __init alternative_instructions(void)
 
 	apply_alternatives(__alt_instructions, __alt_instructions_end);
 
-	/* switch to patch-once-at-boottime-only mode and free the
-	 * tables in case we know the number of CPUs will never ever
-	 * change */
-#ifdef CONFIG_HOTPLUG_CPU
-	if (num_possible_cpus() < 2)
-		smp_alt_once = 1;
-#endif
-
 #ifdef CONFIG_SMP
-	if (smp_alt_once) {
-		if (1 == num_possible_cpus()) {
-			pr_info("switching to UP code\n");
-			set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
-			set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
-
-			alternatives_smp_unlock(__smp_locks, __smp_locks_end,
-						_text, _etext);
-		}
-	} else {
+	/* Patch to UP if other cpus not imminent. */
+	if (!noreplace_smp && (num_present_cpus() == 1 || setup_max_cpus <= 1)) {
+		uniproc_patched = true;
 		alternatives_smp_module_add(NULL, "core kernel",
 					    __smp_locks, __smp_locks_end,
 					    _text, _etext);
-
-		/* Only switch to UP mode if we don't immediately boot others */
-		if (num_present_cpus() == 1 || setup_max_cpus <= 1)
-			alternatives_smp_switch(0);
 	}
-#endif
- 	apply_paravirt(__parainstructions, __parainstructions_end);
 
-	if (smp_alt_once)
+	if (!uniproc_patched || num_possible_cpus() == 1)
 		free_init_pages("SMP alternatives",
 				(unsigned long)__smp_locks,
 				(unsigned long)__smp_locks_end);
+#endif
+
+	apply_paravirt(__parainstructions, __parainstructions_end);
 
 	restart_nmi();
 }
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 24deb3082328..b17416e72fbd 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1934,7 +1934,7 @@ void smp_error_interrupt(struct pt_regs *regs)
 			apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
 		i++;
 		v1 >>= 1;
-	};
+	}
 
 	apic_printk(APIC_DEBUG, KERN_CONT "\n");
 
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index bc552cff2578..a65829ac2b9a 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -30,7 +30,7 @@
 
 static int numachip_system __read_mostly;
 
-static struct apic apic_numachip __read_mostly;
+static const struct apic apic_numachip __read_mostly;
 
 static unsigned int get_apic_id(unsigned long x)
 {
@@ -199,7 +199,7 @@ static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return 0;
 }
 
-static struct apic apic_numachip __refconst = {
+static const struct apic apic_numachip __refconst = {
 
 	.name				= "NumaConnect system",
 	.probe				= numachip_probe,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 406eee784684..c265593ec2cd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1204,7 +1204,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 	BUG_ON(!cfg->vector);
 
 	vector = cfg->vector;
-	for_each_cpu(cpu, cfg->domain)
+	for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
@@ -1212,7 +1212,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 
 	if (likely(!cfg->move_in_progress))
 		return;
-	for_each_cpu(cpu, cfg->old_domain) {
+	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
 		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
 								vector++) {
 			if (per_cpu(vector_irq, cpu)[vector] != irq)
@@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
 	if (!IO_APIC_IRQ(irq))
 		return;
 
+	/*
+	 * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC
+	 * can handle this irq and the apic driver is finialized at this point,
+	 * update the cfg->domain.
+	 */
+	if (irq < legacy_pic->nr_legacy_irqs &&
+	    cpumask_equal(cfg->domain, cpumask_of(0)))
+		apic->vector_allocation_domain(0, cfg->domain,
+					       apic->target_cpus());
+
 	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
 		return;
 
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 9d92e19039f0..f7e98a2c0d12 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -737,6 +737,72 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c,
 }
 #endif
 
+static void __cpuinit cpu_set_tlb_flushall_shift(struct cpuinfo_x86 *c)
+{
+	if (!cpu_has_invlpg)
+		return;
+
+	tlb_flushall_shift = 5;
+
+	if (c->x86 <= 0x11)
+		tlb_flushall_shift = 4;
+}
+
+static void __cpuinit cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
+{
+	u32 ebx, eax, ecx, edx;
+	u16 mask = 0xfff;
+
+	if (c->x86 < 0xf)
+		return;
+
+	if (c->extended_cpuid_level < 0x80000006)
+		return;
+
+	cpuid(0x80000006, &eax, &ebx, &ecx, &edx);
+
+	tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask;
+	tlb_lli_4k[ENTRIES] = ebx & mask;
+
+	/*
+	 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB
+	 * characteristics from the CPUID function 0x80000005 instead.
+	 */
+	if (c->x86 == 0xf) {
+		cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
+		mask = 0xff;
+	}
+
+	/* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
+	if (!((eax >> 16) & mask)) {
+		u32 a, b, c, d;
+
+		cpuid(0x80000005, &a, &b, &c, &d);
+		tlb_lld_2m[ENTRIES] = (a >> 16) & 0xff;
+	} else {
+		tlb_lld_2m[ENTRIES] = (eax >> 16) & mask;
+	}
+
+	/* a 4M entry uses two 2M entries */
+	tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1;
+
+	/* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */
+	if (!(eax & mask)) {
+		/* Erratum 658 */
+		if (c->x86 == 0x15 && c->x86_model <= 0x1f) {
+			tlb_lli_2m[ENTRIES] = 1024;
+		} else {
+			cpuid(0x80000005, &eax, &ebx, &ecx, &edx);
+			tlb_lli_2m[ENTRIES] = eax & 0xff;
+		}
+	} else
+		tlb_lli_2m[ENTRIES] = eax & mask;
+
+	tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
+
+	cpu_set_tlb_flushall_shift(c);
+}
+
 static const struct cpu_dev __cpuinitconst amd_cpu_dev = {
 	.c_vendor	= "AMD",
 	.c_ident	= { "AuthenticAMD" },
@@ -756,6 +822,7 @@ static const struct cpu_dev __cpuinitconst amd_cpu_dev = {
 	.c_size_cache	= amd_size_cache,
 #endif
 	.c_early_init   = early_init_amd,
+	.c_detect_tlb	= cpu_detect_tlb_amd,
 	.c_bsp_init	= bsp_init_amd,
 	.c_init		= init_amd,
 	.c_x86_vendor	= X86_VENDOR_AMD,
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index c97bb7b5a9f8..d0e910da16c5 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -165,10 +165,15 @@ void __init check_bugs(void)
 	print_cpu_info(&boot_cpu_data);
 #endif
 	check_config();
-	check_fpu();
 	check_hlt();
 	check_popad();
 	init_utsname()->machine[1] =
 		'0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
 	alternative_instructions();
+
+	/*
+	 * kernel_fpu_begin/end() in check_fpu() relies on the patched
+	 * alternative instructions.
+	 */
+	check_fpu();
 }
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 46d8786d655e..7505f7b13e71 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s)
 {
 	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
+	setup_clear_cpu_cap(X86_FEATURE_AVX);
+	setup_clear_cpu_cap(X86_FEATURE_AVX2);
 	return 1;
 }
 __setup("noxsave", x86_xsave_setup);
@@ -257,23 +259,36 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 }
 #endif
 
-static int disable_smep __cpuinitdata;
 static __init int setup_disable_smep(char *arg)
 {
-	disable_smep = 1;
+	setup_clear_cpu_cap(X86_FEATURE_SMEP);
 	return 1;
 }
 __setup("nosmep", setup_disable_smep);
 
-static __cpuinit void setup_smep(struct cpuinfo_x86 *c)
+static __always_inline void setup_smep(struct cpuinfo_x86 *c)
 {
-	if (cpu_has(c, X86_FEATURE_SMEP)) {
-		if (unlikely(disable_smep)) {
-			setup_clear_cpu_cap(X86_FEATURE_SMEP);
-			clear_in_cr4(X86_CR4_SMEP);
-		} else
-			set_in_cr4(X86_CR4_SMEP);
-	}
+	if (cpu_has(c, X86_FEATURE_SMEP))
+		set_in_cr4(X86_CR4_SMEP);
+}
+
+static __init int setup_disable_smap(char *arg)
+{
+	setup_clear_cpu_cap(X86_FEATURE_SMAP);
+	return 1;
+}
+__setup("nosmap", setup_disable_smap);
+
+static __always_inline void setup_smap(struct cpuinfo_x86 *c)
+{
+	unsigned long eflags;
+
+	/* This should have been cleared long ago */
+	raw_local_save_flags(eflags);
+	BUG_ON(eflags & X86_EFLAGS_AC);
+
+	if (cpu_has(c, X86_FEATURE_SMAP))
+		set_in_cr4(X86_CR4_SMAP);
 }
 
 /*
@@ -474,7 +489,7 @@ void __cpuinit cpu_detect_tlb(struct cpuinfo_x86 *c)
 
 	printk(KERN_INFO "Last level iTLB entries: 4KB %d, 2MB %d, 4MB %d\n" \
 		"Last level dTLB entries: 4KB %d, 2MB %d, 4MB %d\n"	     \
-		"tlb_flushall_shift is 0x%x\n",
+		"tlb_flushall_shift: %d\n",
 		tlb_lli_4k[ENTRIES], tlb_lli_2m[ENTRIES],
 		tlb_lli_4m[ENTRIES], tlb_lld_4k[ENTRIES],
 		tlb_lld_2m[ENTRIES], tlb_lld_4m[ENTRIES],
@@ -710,8 +725,6 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	c->cpu_index = 0;
 	filter_cpuid_features(c, false);
 
-	setup_smep(c);
-
 	if (this_cpu->c_bsp_init)
 		this_cpu->c_bsp_init(c);
 }
@@ -796,8 +809,6 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		c->phys_proc_id = c->initial_apicid;
 	}
 
-	setup_smep(c);
-
 	get_model_name(c); /* Default name */
 
 	detect_nopl(c);
@@ -862,6 +873,10 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	/* Disable the PN if appropriate */
 	squash_the_stupid_serial_number(c);
 
+	/* Set up SMEP/SMAP */
+	setup_smep(c);
+	setup_smap(c);
+
 	/*
 	 * The vendor-specific functions might have changed features.
 	 * Now we do "generic changes."
@@ -940,8 +955,7 @@ void __init identify_boot_cpu(void)
 #else
 	vgetcpu_set_mode();
 #endif
-	if (boot_cpu_data.cpuid_level >= 2)
-		cpu_detect_tlb(&boot_cpu_data);
+	cpu_detect_tlb(&boot_cpu_data);
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
@@ -1021,14 +1035,16 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 		printk(KERN_CONT "%s ", vendor);
 
 	if (c->x86_model_id[0])
-		printk(KERN_CONT "%s", c->x86_model_id);
+		printk(KERN_CONT "%s", strim(c->x86_model_id));
 	else
 		printk(KERN_CONT "%d86", c->x86);
 
+	printk(KERN_CONT " (fam: %02x, model: %02x", c->x86, c->x86_model);
+
 	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
+		printk(KERN_CONT ", stepping: %02x)\n", c->x86_mask);
 	else
-		printk(KERN_CONT "\n");
+		printk(KERN_CONT ")\n");
 
 	print_cpu_msr(c);
 }
@@ -1111,11 +1127,10 @@ void syscall_init(void)
 
 	/* Flags to clear on syscall */
 	wrmsrl(MSR_SYSCALL_MASK,
-	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
+	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|
+	       X86_EFLAGS_IOPL|X86_EFLAGS_AC);
 }
 
-unsigned long kernel_eflags;
-
 /*
  * Copies of the original ist values from the tss are only accessed during
  * debugging, no special alignment required.
@@ -1295,9 +1310,6 @@ void __cpuinit cpu_init(void)
 	dbg_restore_debug_regs();
 
 	fpu_init();
-	xsave_init();
-
-	raw_local_save_flags(kernel_eflags);
 
 	if (is_uv_system())
 		uv_cpu_init();
@@ -1350,6 +1362,5 @@ void __cpuinit cpu_init(void)
 	dbg_restore_debug_regs();
 
 	fpu_init();
-	xsave_init();
 }
 #endif
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 0a4ce2980a5a..198e019a531a 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -648,6 +648,10 @@ static void __cpuinit intel_detect_tlb(struct cpuinfo_x86 *c)
 	int i, j, n;
 	unsigned int regs[4];
 	unsigned char *desc = (unsigned char *)regs;
+
+	if (c->cpuid_level < 2)
+		return;
+
 	/* Number of times to iterate */
 	n = cpuid_eax(2) & 0xFF;
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index fc4beb393577..ddc72f839332 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -78,6 +78,7 @@ static void raise_exception(struct mce *m, struct pt_regs *pregs)
 }
 
 static cpumask_var_t mce_inject_cpumask;
+static DEFINE_MUTEX(mce_inject_mutex);
 
 static int mce_raise_notify(unsigned int cmd, struct pt_regs *regs)
 {
@@ -194,7 +195,11 @@ static void raise_mce(struct mce *m)
 		put_online_cpus();
 	} else
 #endif
+	{
+		preempt_disable();
 		raise_local();
+		preempt_enable();
+	}
 }
 
 /* Error injection interface */
@@ -225,7 +230,10 @@ static ssize_t mce_write(struct file *filp, const char __user *ubuf,
 	 * so do it a jiffie or two later everywhere.
 	 */
 	schedule_timeout(2);
+
+	mutex_lock(&mce_inject_mutex);
 	raise_mce(&m);
+	mutex_unlock(&mce_inject_mutex);
 	return usize;
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index ed44c8a65858..6a05c1d327a9 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -28,6 +28,18 @@ extern int mce_ser;
 
 extern struct mce_bank *mce_banks;
 
+#ifdef CONFIG_X86_MCE_INTEL
+unsigned long mce_intel_adjust_timer(unsigned long interval);
+void mce_intel_cmci_poll(void);
+void mce_intel_hcpu_update(unsigned long cpu);
+#else
+# define mce_intel_adjust_timer mce_adjust_timer_default
+static inline void mce_intel_cmci_poll(void) { }
+static inline void mce_intel_hcpu_update(unsigned long cpu) { }
+#endif
+
+void mce_timer_kick(unsigned long interval);
+
 #ifdef CONFIG_ACPI_APEI
 int apei_write_mce(struct mce *m);
 ssize_t apei_read_mce(struct mce *m, u64 *record_id);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index 413c2ced887c..13017626f9a8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -55,13 +55,6 @@ static struct severity {
 #define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
 #define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
 #define	MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV)
-#define MCACOD 0xffff
-/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
-#define MCACOD_SCRUB	0x00C0	/* 0xC0-0xCF Memory Scrubbing */
-#define MCACOD_SCRUBMSK	0xfff0
-#define MCACOD_L3WB	0x017A	/* L3 Explicit Writeback */
-#define MCACOD_DATA	0x0134	/* Data Load */
-#define MCACOD_INSTR	0x0150	/* Instruction Fetch */
 
 	MCESEV(
 		NO, "Invalid",
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5e095f873e3e..29e87d3b2843 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -83,6 +83,7 @@ static int			mce_dont_log_ce		__read_mostly;
 int				mce_cmci_disabled	__read_mostly;
 int				mce_ignore_ce		__read_mostly;
 int				mce_ser			__read_mostly;
+int				mce_bios_cmci_threshold	__read_mostly;
 
 struct mce_bank                *mce_banks		__read_mostly;
 
@@ -103,6 +104,8 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 
 static DEFINE_PER_CPU(struct work_struct, mce_work);
 
+static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs);
+
 /*
  * CPU/chipset specific EDAC code can register a notifier call here to print
  * MCE errors in a human-readable form.
@@ -650,14 +653,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll);
  * Do a quick check if any of the events requires a panic.
  * This decides if we keep the events around or clear them.
  */
-static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp)
+static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
+			  struct pt_regs *regs)
 {
 	int i, ret = 0;
 
 	for (i = 0; i < banks; i++) {
 		m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
-		if (m->status & MCI_STATUS_VAL)
+		if (m->status & MCI_STATUS_VAL) {
 			__set_bit(i, validp);
+			if (quirk_no_way_out)
+				quirk_no_way_out(i, m, regs);
+		}
 		if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
 			ret = 1;
 	}
@@ -1040,7 +1047,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	*final = m;
 
 	memset(valid_banks, 0, sizeof(valid_banks));
-	no_way_out = mce_no_way_out(&m, &msg, valid_banks);
+	no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs);
 
 	barrier();
 
@@ -1260,6 +1267,14 @@ static unsigned long check_interval = 5 * 60; /* 5 minutes */
 static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
+static unsigned long mce_adjust_timer_default(unsigned long interval)
+{
+	return interval;
+}
+
+static unsigned long (*mce_adjust_timer)(unsigned long interval) =
+	mce_adjust_timer_default;
+
 static void mce_timer_fn(unsigned long data)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
@@ -1270,6 +1285,7 @@ static void mce_timer_fn(unsigned long data)
 	if (mce_available(__this_cpu_ptr(&cpu_info))) {
 		machine_check_poll(MCP_TIMESTAMP,
 				&__get_cpu_var(mce_poll_banks));
+		mce_intel_cmci_poll();
 	}
 
 	/*
@@ -1277,14 +1293,38 @@ static void mce_timer_fn(unsigned long data)
 	 * polling interval, otherwise increase the polling interval.
 	 */
 	iv = __this_cpu_read(mce_next_interval);
-	if (mce_notify_irq())
+	if (mce_notify_irq()) {
 		iv = max(iv / 2, (unsigned long) HZ/100);
-	else
+	} else {
 		iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
+		iv = mce_adjust_timer(iv);
+	}
 	__this_cpu_write(mce_next_interval, iv);
+	/* Might have become 0 after CMCI storm subsided */
+	if (iv) {
+		t->expires = jiffies + iv;
+		add_timer_on(t, smp_processor_id());
+	}
+}
 
-	t->expires = jiffies + iv;
-	add_timer_on(t, smp_processor_id());
+/*
+ * Ensure that the timer is firing in @interval from now.
+ */
+void mce_timer_kick(unsigned long interval)
+{
+	struct timer_list *t = &__get_cpu_var(mce_timer);
+	unsigned long when = jiffies + interval;
+	unsigned long iv = __this_cpu_read(mce_next_interval);
+
+	if (timer_pending(t)) {
+		if (time_before(when, t->expires))
+			mod_timer_pinned(t, when);
+	} else {
+		t->expires = round_jiffies(when);
+		add_timer_on(t, smp_processor_id());
+	}
+	if (interval < iv)
+		__this_cpu_write(mce_next_interval, interval);
 }
 
 /* Must not be called in IRQ context where del_timer_sync() can deadlock */
@@ -1418,6 +1458,34 @@ static void __mcheck_cpu_init_generic(void)
 	}
 }
 
+/*
+ * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and
+ * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM
+ * Vol 3B Table 15-20). But this confuses both the code that determines
+ * whether the machine check occurred in kernel or user mode, and also
+ * the severity assessment code. Pretend that EIPV was set, and take the
+ * ip/cs values from the pt_regs that mce_gather_info() ignored earlier.
+ */
+static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
+{
+	if (bank != 0)
+		return;
+	if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0)
+		return;
+	if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC|
+		          MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV|
+			  MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR|
+			  MCACOD)) !=
+			 (MCI_STATUS_UC|MCI_STATUS_EN|
+			  MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S|
+			  MCI_STATUS_AR|MCACOD_INSTR))
+		return;
+
+	m->mcgstatus |= MCG_STATUS_EIPV;
+	m->ip = regs->ip;
+	m->cs = regs->cs;
+}
+
 /* Add per CPU specific workarounds here */
 static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 {
@@ -1515,6 +1583,9 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 		 */
 		if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
 			mce_bootlog = 0;
+
+		if (c->x86 == 6 && c->x86_model == 45)
+			quirk_no_way_out = quirk_sandybridge_ifu;
 	}
 	if (monarch_timeout < 0)
 		monarch_timeout = 0;
@@ -1548,6 +1619,7 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
 		mce_intel_feature_init(c);
+		mce_adjust_timer = mce_intel_adjust_timer;
 		break;
 	case X86_VENDOR_AMD:
 		mce_amd_feature_init(c);
@@ -1557,23 +1629,28 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 	}
 }
 
-static void __mcheck_cpu_init_timer(void)
+static void mce_start_timer(unsigned int cpu, struct timer_list *t)
 {
-	struct timer_list *t = &__get_cpu_var(mce_timer);
-	unsigned long iv = check_interval * HZ;
+	unsigned long iv = mce_adjust_timer(check_interval * HZ);
 
-	setup_timer(t, mce_timer_fn, smp_processor_id());
+	__this_cpu_write(mce_next_interval, iv);
 
-	if (mce_ignore_ce)
+	if (mce_ignore_ce || !iv)
 		return;
 
-	__this_cpu_write(mce_next_interval, iv);
-	if (!iv)
-		return;
 	t->expires = round_jiffies(jiffies + iv);
 	add_timer_on(t, smp_processor_id());
 }
 
+static void __mcheck_cpu_init_timer(void)
+{
+	struct timer_list *t = &__get_cpu_var(mce_timer);
+	unsigned int cpu = smp_processor_id();
+
+	setup_timer(t, mce_timer_fn, cpu);
+	mce_start_timer(cpu, t);
+}
+
 /* Handle unconfigured int18 (should never happen) */
 static void unexpected_machine_check(struct pt_regs *regs, long error_code)
 {
@@ -1870,6 +1947,7 @@ static struct miscdevice mce_chrdev_device = {
  *	check, or 0 to not wait
  * mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
  * mce=nobootlog Don't log MCEs from before booting.
+ * mce=bios_cmci_threshold Don't program the CMCI threshold
  */
 static int __init mcheck_enable(char *str)
 {
@@ -1889,6 +1967,8 @@ static int __init mcheck_enable(char *str)
 		mce_ignore_ce = 1;
 	else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
 		mce_bootlog = (str[0] == 'b');
+	else if (!strcmp(str, "bios_cmci_threshold"))
+		mce_bios_cmci_threshold = 1;
 	else if (isdigit(str[0])) {
 		get_option(&str, &tolerant);
 		if (*str == ',') {
@@ -2129,6 +2209,11 @@ static struct dev_ext_attribute dev_attr_cmci_disabled = {
 	&mce_cmci_disabled
 };
 
+static struct dev_ext_attribute dev_attr_bios_cmci_threshold = {
+	__ATTR(bios_cmci_threshold, 0444, device_show_int, NULL),
+	&mce_bios_cmci_threshold
+};
+
 static struct device_attribute *mce_device_attrs[] = {
 	&dev_attr_tolerant.attr,
 	&dev_attr_check_interval.attr,
@@ -2137,6 +2222,7 @@ static struct device_attribute *mce_device_attrs[] = {
 	&dev_attr_dont_log_ce.attr,
 	&dev_attr_ignore_ce.attr,
 	&dev_attr_cmci_disabled.attr,
+	&dev_attr_bios_cmci_threshold.attr,
 	NULL
 };
 
@@ -2257,38 +2343,33 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	unsigned int cpu = (unsigned long)hcpu;
 	struct timer_list *t = &per_cpu(mce_timer, cpu);
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
 		mce_device_create(cpu);
 		if (threshold_cpu_callback)
 			threshold_cpu_callback(action, cpu);
 		break;
 	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
 		if (threshold_cpu_callback)
 			threshold_cpu_callback(action, cpu);
 		mce_device_remove(cpu);
+		mce_intel_hcpu_update(cpu);
 		break;
 	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-		del_timer_sync(t);
 		smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
+		del_timer_sync(t);
 		break;
 	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-		if (!mce_ignore_ce && check_interval) {
-			t->expires = round_jiffies(jiffies +
-					per_cpu(mce_next_interval, cpu));
-			add_timer_on(t, cpu);
-		}
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
+		mce_start_timer(cpu, t);
 		break;
-	case CPU_POST_DEAD:
+	}
+
+	if (action == CPU_POST_DEAD) {
 		/* intentionally ignoring frozen here */
 		cmci_rediscover(cpu);
-		break;
 	}
+
 	return NOTIFY_OK;
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 38e49bc95ffc..5f88abf07e9c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -15,6 +15,8 @@
 #include <asm/msr.h>
 #include <asm/mce.h>
 
+#include "mce-internal.h"
+
 /*
  * Support for Intel Correct Machine Check Interrupts. This allows
  * the CPU to raise an interrupt when a corrected machine check happened.
@@ -30,7 +32,22 @@ static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
  */
 static DEFINE_RAW_SPINLOCK(cmci_discover_lock);
 
-#define CMCI_THRESHOLD 1
+#define CMCI_THRESHOLD		1
+#define CMCI_POLL_INTERVAL	(30 * HZ)
+#define CMCI_STORM_INTERVAL	(1 * HZ)
+#define CMCI_STORM_THRESHOLD	15
+
+static DEFINE_PER_CPU(unsigned long, cmci_time_stamp);
+static DEFINE_PER_CPU(unsigned int, cmci_storm_cnt);
+static DEFINE_PER_CPU(unsigned int, cmci_storm_state);
+
+enum {
+	CMCI_STORM_NONE,
+	CMCI_STORM_ACTIVE,
+	CMCI_STORM_SUBSIDED,
+};
+
+static atomic_t cmci_storm_on_cpus;
 
 static int cmci_supported(int *banks)
 {
@@ -53,6 +70,93 @@ static int cmci_supported(int *banks)
 	return !!(cap & MCG_CMCI_P);
 }
 
+void mce_intel_cmci_poll(void)
+{
+	if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE)
+		return;
+	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
+}
+
+void mce_intel_hcpu_update(unsigned long cpu)
+{
+	if (per_cpu(cmci_storm_state, cpu) == CMCI_STORM_ACTIVE)
+		atomic_dec(&cmci_storm_on_cpus);
+
+	per_cpu(cmci_storm_state, cpu) = CMCI_STORM_NONE;
+}
+
+unsigned long mce_intel_adjust_timer(unsigned long interval)
+{
+	int r;
+
+	if (interval < CMCI_POLL_INTERVAL)
+		return interval;
+
+	switch (__this_cpu_read(cmci_storm_state)) {
+	case CMCI_STORM_ACTIVE:
+		/*
+		 * We switch back to interrupt mode once the poll timer has
+		 * silenced itself. That means no events recorded and the
+		 * timer interval is back to our poll interval.
+		 */
+		__this_cpu_write(cmci_storm_state, CMCI_STORM_SUBSIDED);
+		r = atomic_sub_return(1, &cmci_storm_on_cpus);
+		if (r == 0)
+			pr_notice("CMCI storm subsided: switching to interrupt mode\n");
+		/* FALLTHROUGH */
+
+	case CMCI_STORM_SUBSIDED:
+		/*
+		 * We wait for all cpus to go back to SUBSIDED
+		 * state. When that happens we switch back to
+		 * interrupt mode.
+		 */
+		if (!atomic_read(&cmci_storm_on_cpus)) {
+			__this_cpu_write(cmci_storm_state, CMCI_STORM_NONE);
+			cmci_reenable();
+			cmci_recheck();
+		}
+		return CMCI_POLL_INTERVAL;
+	default:
+		/*
+		 * We have shiny weather. Let the poll do whatever it
+		 * thinks.
+		 */
+		return interval;
+	}
+}
+
+static bool cmci_storm_detect(void)
+{
+	unsigned int cnt = __this_cpu_read(cmci_storm_cnt);
+	unsigned long ts = __this_cpu_read(cmci_time_stamp);
+	unsigned long now = jiffies;
+	int r;
+
+	if (__this_cpu_read(cmci_storm_state) != CMCI_STORM_NONE)
+		return true;
+
+	if (time_before_eq(now, ts + CMCI_STORM_INTERVAL)) {
+		cnt++;
+	} else {
+		cnt = 1;
+		__this_cpu_write(cmci_time_stamp, now);
+	}
+	__this_cpu_write(cmci_storm_cnt, cnt);
+
+	if (cnt <= CMCI_STORM_THRESHOLD)
+		return false;
+
+	cmci_clear();
+	__this_cpu_write(cmci_storm_state, CMCI_STORM_ACTIVE);
+	r = atomic_add_return(1, &cmci_storm_on_cpus);
+	mce_timer_kick(CMCI_POLL_INTERVAL);
+
+	if (r == 1)
+		pr_notice("CMCI storm detected: switching to poll mode\n");
+	return true;
+}
+
 /*
  * The interrupt handler. This is called on every event.
  * Just call the poller directly to log any events.
@@ -61,33 +165,28 @@ static int cmci_supported(int *banks)
  */
 static void intel_threshold_interrupt(void)
 {
+	if (cmci_storm_detect())
+		return;
 	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
 	mce_notify_irq();
 }
 
-static void print_update(char *type, int *hdr, int num)
-{
-	if (*hdr == 0)
-		printk(KERN_INFO "CPU %d MCA banks", smp_processor_id());
-	*hdr = 1;
-	printk(KERN_CONT " %s:%d", type, num);
-}
-
 /*
  * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
  * on this CPU. Use the algorithm recommended in the SDM to discover shared
  * banks.
  */
-static void cmci_discover(int banks, int boot)
+static void cmci_discover(int banks)
 {
 	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
 	unsigned long flags;
-	int hdr = 0;
 	int i;
+	int bios_wrong_thresh = 0;
 
 	raw_spin_lock_irqsave(&cmci_discover_lock, flags);
 	for (i = 0; i < banks; i++) {
 		u64 val;
+		int bios_zero_thresh = 0;
 
 		if (test_bit(i, owned))
 			continue;
@@ -96,29 +195,52 @@ static void cmci_discover(int banks, int boot)
 
 		/* Already owned by someone else? */
 		if (val & MCI_CTL2_CMCI_EN) {
-			if (test_and_clear_bit(i, owned) && !boot)
-				print_update("SHD", &hdr, i);
+			clear_bit(i, owned);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 			continue;
 		}
 
-		val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
-		val |= MCI_CTL2_CMCI_EN | CMCI_THRESHOLD;
+		if (!mce_bios_cmci_threshold) {
+			val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
+			val |= CMCI_THRESHOLD;
+		} else if (!(val & MCI_CTL2_CMCI_THRESHOLD_MASK)) {
+			/*
+			 * If bios_cmci_threshold boot option was specified
+			 * but the threshold is zero, we'll try to initialize
+			 * it to 1.
+			 */
+			bios_zero_thresh = 1;
+			val |= CMCI_THRESHOLD;
+		}
+
+		val |= MCI_CTL2_CMCI_EN;
 		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
 		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
 		if (val & MCI_CTL2_CMCI_EN) {
-			if (!test_and_set_bit(i, owned) && !boot)
-				print_update("CMCI", &hdr, i);
+			set_bit(i, owned);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
+			/*
+			 * We are able to set thresholds for some banks that
+			 * had a threshold of 0. This means the BIOS has not
+			 * set the thresholds properly or does not work with
+			 * this boot option. Note down now and report later.
+			 */
+			if (mce_bios_cmci_threshold && bios_zero_thresh &&
+					(val & MCI_CTL2_CMCI_THRESHOLD_MASK))
+				bios_wrong_thresh = 1;
 		} else {
 			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
 		}
 	}
 	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
-	if (hdr)
-		printk(KERN_CONT "\n");
+	if (mce_bios_cmci_threshold && bios_wrong_thresh) {
+		pr_info_once(
+			"bios_cmci_threshold: Some banks do not have valid thresholds set\n");
+		pr_info_once(
+			"bios_cmci_threshold: Make sure your BIOS supports this boot option\n");
+	}
 }
 
 /*
@@ -156,7 +278,7 @@ void cmci_clear(void)
 			continue;
 		/* Disable CMCI */
 		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
-		val &= ~(MCI_CTL2_CMCI_EN|MCI_CTL2_CMCI_THRESHOLD_MASK);
+		val &= ~MCI_CTL2_CMCI_EN;
 		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
 		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
@@ -186,7 +308,7 @@ void cmci_rediscover(int dying)
 			continue;
 		/* Recheck banks in case CPUs don't all have the same */
 		if (cmci_supported(&banks))
-			cmci_discover(banks, 0);
+			cmci_discover(banks);
 	}
 
 	set_cpus_allowed_ptr(current, old);
@@ -200,7 +322,7 @@ void cmci_reenable(void)
 {
 	int banks;
 	if (cmci_supported(&banks))
-		cmci_discover(banks, 0);
+		cmci_discover(banks);
 }
 
 static void intel_init_cmci(void)
@@ -211,7 +333,7 @@ static void intel_init_cmci(void)
 		return;
 
 	mce_threshold_vector = intel_threshold_interrupt;
-	cmci_discover(banks, 1);
+	cmci_discover(banks);
 	/*
 	 * For CPU #0 this runs with still disabled APIC, but that's
 	 * ok because only the vector is set up. We still do another
diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl
index c7b3fe2d72e0..091972ef49de 100644
--- a/arch/x86/kernel/cpu/mkcapflags.pl
+++ b/arch/x86/kernel/cpu/mkcapflags.pl
@@ -8,7 +8,10 @@
 open(IN, "< $in\0")   or die "$0: cannot open: $in: $!\n";
 open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
 
-print OUT "#include <asm/cpufeature.h>\n\n";
+print OUT "#ifndef _ASM_X86_CPUFEATURE_H\n";
+print OUT "#include <asm/cpufeature.h>\n";
+print OUT "#endif\n";
+print OUT "\n";
 print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
 
 %features = ();
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 29557aa06dda..915b876edd1e 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -32,6 +32,8 @@
 #include <asm/smp.h>
 #include <asm/alternative.h>
 #include <asm/timer.h>
+#include <asm/desc.h>
+#include <asm/ldt.h>
 
 #include "perf_event.h"
 
@@ -1738,6 +1740,29 @@ valid_user_frame(const void __user *fp, unsigned long size)
 	return (__range_not_ok(fp, size, TASK_SIZE) == 0);
 }
 
+static unsigned long get_segment_base(unsigned int segment)
+{
+	struct desc_struct *desc;
+	int idx = segment >> 3;
+
+	if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) {
+		if (idx > LDT_ENTRIES)
+			return 0;
+
+		if (idx > current->active_mm->context.size)
+			return 0;
+
+		desc = current->active_mm->context.ldt;
+	} else {
+		if (idx > GDT_ENTRIES)
+			return 0;
+
+		desc = __this_cpu_ptr(&gdt_page.gdt[0]);
+	}
+
+	return get_desc_base(desc + idx);
+}
+
 #ifdef CONFIG_COMPAT
 
 #include <asm/compat.h>
@@ -1746,13 +1771,17 @@ static inline int
 perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
 	/* 32-bit process in 64-bit kernel. */
+	unsigned long ss_base, cs_base;
 	struct stack_frame_ia32 frame;
 	const void __user *fp;
 
 	if (!test_thread_flag(TIF_IA32))
 		return 0;
 
-	fp = compat_ptr(regs->bp);
+	cs_base = get_segment_base(regs->cs);
+	ss_base = get_segment_base(regs->ss);
+
+	fp = compat_ptr(ss_base + regs->bp);
 	while (entry->nr < PERF_MAX_STACK_DEPTH) {
 		unsigned long bytes;
 		frame.next_frame     = 0;
@@ -1765,8 +1794,8 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
 
-		perf_callchain_store(entry, frame.return_address);
-		fp = compat_ptr(frame.next_frame);
+		perf_callchain_store(entry, cs_base + frame.return_address);
+		fp = compat_ptr(ss_base + frame.next_frame);
 	}
 	return 1;
 }
@@ -1789,6 +1818,12 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 		return;
 	}
 
+	/*
+	 * We don't know what to do with VM86 stacks.. ignore them for now.
+	 */
+	if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM))
+		return;
+
 	fp = (void __user *)regs->bp;
 
 	perf_callchain_store(entry, regs->ip);
@@ -1816,16 +1851,50 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 	}
 }
 
-unsigned long perf_instruction_pointer(struct pt_regs *regs)
+/*
+ * Deal with code segment offsets for the various execution modes:
+ *
+ *   VM86 - the good olde 16 bit days, where the linear address is
+ *          20 bits and we use regs->ip + 0x10 * regs->cs.
+ *
+ *   IA32 - Where we need to look at GDT/LDT segment descriptor tables
+ *          to figure out what the 32bit base address is.
+ *
+ *    X32 - has TIF_X32 set, but is running in x86_64
+ *
+ * X86_64 - CS,DS,SS,ES are all zero based.
+ */
+static unsigned long code_segment_base(struct pt_regs *regs)
 {
-	unsigned long ip;
+	/*
+	 * If we are in VM86 mode, add the segment offset to convert to a
+	 * linear address.
+	 */
+	if (regs->flags & X86_VM_MASK)
+		return 0x10 * regs->cs;
+
+	/*
+	 * For IA32 we look at the GDT/LDT segment base to convert the
+	 * effective IP to a linear address.
+	 */
+#ifdef CONFIG_X86_32
+	if (user_mode(regs) && regs->cs != __USER_CS)
+		return get_segment_base(regs->cs);
+#else
+	if (test_thread_flag(TIF_IA32)) {
+		if (user_mode(regs) && regs->cs != __USER32_CS)
+			return get_segment_base(regs->cs);
+	}
+#endif
+	return 0;
+}
 
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
 	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		ip = perf_guest_cbs->get_guest_ip();
-	else
-		ip = instruction_pointer(regs);
+		return perf_guest_cbs->get_guest_ip();
 
-	return ip;
+	return regs->ip + code_segment_base(regs);
 }
 
 unsigned long perf_misc_flags(struct pt_regs *regs)
@@ -1838,7 +1907,7 @@ unsigned long perf_misc_flags(struct pt_regs *regs)
 		else
 			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
 	} else {
-		if (!kernel_ip(regs->ip))
+		if (user_mode(regs))
 			misc |= PERF_RECORD_MISC_USER;
 		else
 			misc |= PERF_RECORD_MISC_KERNEL;
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 821d53b696d1..8b6defe7eefc 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -516,6 +516,26 @@ static inline bool kernel_ip(unsigned long ip)
 #endif
 }
 
+/*
+ * Not all PMUs provide the right context information to place the reported IP
+ * into full context. Specifically segment registers are typically not
+ * supplied.
+ *
+ * Assuming the address is a linear address (it is for IBS), we fake the CS and
+ * vm86 mode using the known zero-based code segment and 'fix up' the registers
+ * to reflect this.
+ *
+ * Intel PEBS/LBR appear to typically provide the effective address, nothing
+ * much we can do about that but pray and treat it like a linear address.
+ */
+static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip)
+{
+	regs->cs = kernel_ip(ip) ? __KERNEL_CS : __USER_CS;
+	if (regs->flags & X86_VM_MASK)
+		regs->flags ^= (PERF_EFLAGS_VM | X86_VM_MASK);
+	regs->ip = ip;
+}
+
 #ifdef CONFIG_CPU_SUP_AMD
 
 int amd_pmu_init(void);
@@ -566,6 +586,8 @@ extern struct event_constraint intel_westmere_pebs_event_constraints[];
 
 extern struct event_constraint intel_snb_pebs_event_constraints[];
 
+extern struct event_constraint intel_ivb_pebs_event_constraints[];
+
 struct event_constraint *intel_pebs_constraints(struct perf_event *event);
 
 void intel_pmu_pebs_enable(struct perf_event *event);
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index da9bcdcd9856..eebd5ffe1bba 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -13,6 +13,8 @@
 
 #include <asm/apic.h>
 
+#include "perf_event.h"
+
 static u32 ibs_caps;
 
 #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
@@ -207,6 +209,15 @@ static int perf_ibs_precise_event(struct perf_event *event, u64 *config)
 	return -EOPNOTSUPP;
 }
 
+static const struct perf_event_attr ibs_notsupp = {
+	.exclude_user	= 1,
+	.exclude_kernel	= 1,
+	.exclude_hv	= 1,
+	.exclude_idle	= 1,
+	.exclude_host	= 1,
+	.exclude_guest	= 1,
+};
+
 static int perf_ibs_init(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
@@ -227,6 +238,9 @@ static int perf_ibs_init(struct perf_event *event)
 	if (event->pmu != &perf_ibs->pmu)
 		return -ENOENT;
 
+	if (perf_flags(&event->attr) & perf_flags(&ibs_notsupp))
+		return -EINVAL;
+
 	if (config & ~perf_ibs->config_mask)
 		return -EINVAL;
 
@@ -536,7 +550,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
 	if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
 		regs.flags &= ~PERF_EFLAGS_EXACT;
 	} else {
-		instruction_pointer_set(&regs, ibs_data.regs[1]);
+		set_linear_ip(&regs, ibs_data.regs[1]);
 		regs.flags |= PERF_EFLAGS_EXACT;
 	}
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 382366977d4c..6bca492b8547 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr)
 	arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL;
 	arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask;
 	arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask;
+	/*
+	 * If PMU counter has PEBS enabled it is not enough to disable counter
+	 * on a guest entry since PEBS memory write can overshoot guest entry
+	 * and corrupt guest memory. Disabling PEBS solves the problem.
+	 */
+	arr[1].msr = MSR_IA32_PEBS_ENABLE;
+	arr[1].host = cpuc->pebs_enabled;
+	arr[1].guest = 0;
 
-	*nr = 1;
+	*nr = 2;
 	return arr;
 }
 
@@ -2000,6 +2008,7 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 28: /* Atom */
+	case 54: /* Cedariew */
 		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -2039,7 +2048,6 @@ __init int intel_pmu_init(void)
 	case 42: /* SandyBridge */
 	case 45: /* SandyBridge, "Romely-EP" */
 		x86_add_quirk(intel_sandybridge_quirk);
-	case 58: /* IvyBridge */
 		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs,
@@ -2064,6 +2072,29 @@ __init int intel_pmu_init(void)
 
 		pr_cont("SandyBridge events, ");
 		break;
+	case 58: /* IvyBridge */
+		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+		memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs,
+		       sizeof(hw_cache_extra_regs));
+
+		intel_pmu_lbr_init_snb();
+
+		x86_pmu.event_constraints = intel_snb_event_constraints;
+		x86_pmu.pebs_constraints = intel_ivb_pebs_event_constraints;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
+		x86_pmu.extra_regs = intel_snb_extra_regs;
+		/* all extra regs are per-cpu when HT is on */
+		x86_pmu.er_flags |= ERF_HAS_RSP_1;
+		x86_pmu.er_flags |= ERF_NO_HT_SHARING;
+
+		/* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] =
+			X86_CONFIG(.event=0x0e, .umask=0x01, .inv=1, .cmask=1);
+
+		pr_cont("IvyBridge events, ");
+		break;
+
 
 	default:
 		switch (x86_pmu.version) {
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 629ae0b7ad90..826054a4f2ee 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -407,6 +407,20 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	EVENT_CONSTRAINT_END
 };
 
+struct event_constraint intel_ivb_pebs_event_constraints[] = {
+        INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
+        INTEL_UEVENT_CONSTRAINT(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
+        INTEL_UEVENT_CONSTRAINT(0x02c2, 0xf), /* UOPS_RETIRED.RETIRE_SLOTS */
+        INTEL_EVENT_CONSTRAINT(0xc4, 0xf),    /* BR_INST_RETIRED.* */
+        INTEL_EVENT_CONSTRAINT(0xc5, 0xf),    /* BR_MISP_RETIRED.* */
+        INTEL_EVENT_CONSTRAINT(0xcd, 0x8),    /* MEM_TRANS_RETIRED.* */
+        INTEL_EVENT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
+        INTEL_EVENT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
+        INTEL_EVENT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
+        INTEL_EVENT_CONSTRAINT(0xd3, 0xf),    /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */
+        EVENT_CONSTRAINT_END
+};
+
 struct event_constraint *intel_pebs_constraints(struct perf_event *event)
 {
 	struct event_constraint *c;
@@ -499,7 +513,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 	 * We sampled a branch insn, rewind using the LBR stack
 	 */
 	if (ip == to) {
-		regs->ip = from;
+		set_linear_ip(regs, from);
 		return 1;
 	}
 
@@ -529,7 +543,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 	} while (to < ip);
 
 	if (to == ip) {
-		regs->ip = old_to;
+		set_linear_ip(regs, old_to);
 		return 1;
 	}
 
@@ -569,7 +583,8 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 	 * A possible PERF_SAMPLE_REGS will have to transfer all regs.
 	 */
 	regs = *iregs;
-	regs.ip = pebs->ip;
+	regs.flags = pebs->flags;
+	set_linear_ip(&regs, pebs->ip);
 	regs.bp = pebs->bp;
 	regs.sp = pebs->sp;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
index 520b4265fcd2..da02e9cc3754 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -686,7 +686,8 @@ void intel_pmu_lbr_init_atom(void)
 	 * to have an operational LBR which can freeze
 	 * on PMU interrupt
 	 */
-	if (boot_cpu_data.x86_mask < 10) {
+	if (boot_cpu_data.x86_model == 28
+	    && boot_cpu_data.x86_mask < 10) {
 		pr_cont("LBR disabled due to erratum");
 		return;
 	}
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 7563fda9f033..99d96a4978b5 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -661,6 +661,11 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box)
 	}
 }
 
+static struct uncore_event_desc snb_uncore_events[] = {
+	INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"),
+	{ /* end: all zeroes */ },
+};
+
 static struct attribute *snb_uncore_formats_attr[] = {
 	&format_attr_event.attr,
 	&format_attr_umask.attr,
@@ -704,6 +709,7 @@ static struct intel_uncore_type snb_uncore_cbox = {
 	.constraints	= snb_uncore_cbox_constraints,
 	.ops		= &snb_uncore_msr_ops,
 	.format_group	= &snb_uncore_format_group,
+	.event_descs	= snb_uncore_events,
 };
 
 static struct intel_uncore_type *snb_msr_uncores[] = {
@@ -796,7 +802,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = {
 
 DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5");
 DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7");
-DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63");
 DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63");
 DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63");
 
@@ -902,16 +907,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = {
 	.attrs = nhmex_uncore_cbox_formats_attr,
 };
 
+/* msr offset for each instance of cbox */
+static unsigned nhmex_cbox_msr_offsets[] = {
+	0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0,
+};
+
 static struct intel_uncore_type nhmex_uncore_cbox = {
 	.name			= "cbox",
 	.num_counters		= 6,
-	.num_boxes		= 8,
+	.num_boxes		= 10,
 	.perf_ctr_bits		= 48,
 	.event_ctl		= NHMEX_C0_MSR_PMON_EV_SEL0,
 	.perf_ctr		= NHMEX_C0_MSR_PMON_CTR0,
 	.event_mask		= NHMEX_PMON_RAW_EVENT_MASK,
 	.box_ctl		= NHMEX_C0_MSR_PMON_GLOBAL_CTL,
-	.msr_offset		= NHMEX_C_MSR_OFFSET,
+	.msr_offsets		= nhmex_cbox_msr_offsets,
 	.pair_ctr_ctl		= 1,
 	.ops			= &nhmex_uncore_ops,
 	.format_group		= &nhmex_uncore_cbox_format_group
@@ -1032,24 +1042,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = {
 
 static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event)
 {
-	struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
-	struct hw_perf_event_extra *reg2 = &event->hw.branch_reg;
+	struct hw_perf_event *hwc = &event->hw;
+	struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
+	struct hw_perf_event_extra *reg2 = &hwc->branch_reg;
 
-	if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) {
-		reg1->config = event->attr.config1;
-		reg2->config = event->attr.config2;
-	} else {
-		reg1->config = ~0ULL;
-		reg2->config = ~0ULL;
-	}
+	/* only TO_R_PROG_EV event uses the match/mask register */
+	if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) !=
+	    NHMEX_S_EVENT_TO_R_PROG_EV)
+		return 0;
 
 	if (box->pmu->pmu_idx == 0)
 		reg1->reg = NHMEX_S0_MSR_MM_CFG;
 	else
 		reg1->reg = NHMEX_S1_MSR_MM_CFG;
-
 	reg1->idx = 0;
-
+	reg1->config = event->attr.config1;
+	reg2->config = event->attr.config2;
 	return 0;
 }
 
@@ -1059,8 +1067,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per
 	struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
 	struct hw_perf_event_extra *reg2 = &hwc->branch_reg;
 
-	wrmsrl(reg1->reg, 0);
-	if (reg1->config != ~0ULL || reg2->config != ~0ULL) {
+	if (reg1->idx != EXTRA_REG_NONE) {
+		wrmsrl(reg1->reg, 0);
 		wrmsrl(reg1->reg + 1, reg1->config);
 		wrmsrl(reg1->reg + 2, reg2->config);
 		wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN);
@@ -1074,7 +1082,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = {
 	&format_attr_edge.attr,
 	&format_attr_inv.attr,
 	&format_attr_thresh8.attr,
-	&format_attr_mm_cfg.attr,
 	&format_attr_match.attr,
 	&format_attr_mask.attr,
 	NULL,
@@ -1142,6 +1149,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = {
 	EVENT_EXTRA_END
 };
 
+/* Nehalem-EX or Westmere-EX ? */
+bool uncore_nhmex;
+
 static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config)
 {
 	struct intel_uncore_extra_reg *er;
@@ -1171,18 +1181,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64
 		return false;
 
 	/* mask of the shared fields */
-	mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK;
+	if (uncore_nhmex)
+		mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK;
+	else
+		mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK;
 	er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC];
 
 	raw_spin_lock_irqsave(&er->lock, flags);
 	/* add mask of the non-shared field if it's in use */
-	if (__BITS_VALUE(atomic_read(&er->ref), idx, 8))
-		mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+	if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) {
+		if (uncore_nhmex)
+			mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+		else
+			mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+	}
 
 	if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) {
 		atomic_add(1 << (idx * 8), &er->ref);
-		mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK |
-			NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+		if (uncore_nhmex)
+			mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK |
+				NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+		else
+			mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK |
+				WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
 		er->config &= ~mask;
 		er->config |= (config & mask);
 		ret = true;
@@ -1216,7 +1237,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify)
 
 	/* get the non-shared control bits and shift them */
 	idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC;
-	config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+	if (uncore_nhmex)
+		config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
+	else
+		config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx);
 	if (new_idx > orig_idx) {
 		idx = new_idx - orig_idx;
 		config <<= 3 * idx;
@@ -1226,6 +1250,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify)
 	}
 
 	/* add the shared control bits back */
+	if (uncore_nhmex)
+		config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config;
+	else
+		config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config;
 	config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config;
 	if (modify) {
 		/* adjust the main event selector */
@@ -1264,7 +1292,8 @@ again:
 	}
 
 	/* for the match/mask registers */
-	if ((uncore_box_is_fake(box) || !reg2->alloc) &&
+	if (reg2->idx != EXTRA_REG_NONE &&
+	    (uncore_box_is_fake(box) || !reg2->alloc) &&
 	    !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config))
 		goto fail;
 
@@ -1278,7 +1307,8 @@ again:
 		if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8))
 			nhmex_mbox_alter_er(event, idx[0], true);
 		reg1->alloc |= alloc;
-		reg2->alloc = 1;
+		if (reg2->idx != EXTRA_REG_NONE)
+			reg2->alloc = 1;
 	}
 	return NULL;
 fail:
@@ -1342,9 +1372,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event
 	struct extra_reg *er;
 	unsigned msr;
 	int reg_idx = 0;
-
-	if (WARN_ON_ONCE(reg1->idx != -1))
-		return -EINVAL;
 	/*
 	 * The mbox events may require 2 extra MSRs at the most. But only
 	 * the lower 32 bits in these MSRs are significant, so we can use
@@ -1355,11 +1382,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event
 			continue;
 		if (event->attr.config1 & ~er->valid_mask)
 			return -EINVAL;
-		if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) ||
-		    er->idx == __BITS_VALUE(reg1->idx, 1, 8))
-			continue;
-		if (WARN_ON_ONCE(reg_idx >= 2))
-			return -EINVAL;
 
 		msr = er->msr + type->msr_offset * box->pmu->pmu_idx;
 		if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff))
@@ -1368,6 +1390,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event
 		/* always use the 32~63 bits to pass the PLD config */
 		if (er->idx == EXTRA_REG_NHMEX_M_PLD)
 			reg_idx = 1;
+		else if (WARN_ON_ONCE(reg_idx > 0))
+			return -EINVAL;
 
 		reg1->idx &= ~(0xff << (reg_idx * 8));
 		reg1->reg &= ~(0xffff << (reg_idx * 16));
@@ -1376,17 +1400,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event
 		reg1->config = event->attr.config1;
 		reg_idx++;
 	}
-	/* use config2 to pass the filter config */
-	reg2->idx = EXTRA_REG_NHMEX_M_FILTER;
-	if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN)
-		reg2->config = event->attr.config2;
-	else
-		reg2->config = ~0ULL;
-	if (box->pmu->pmu_idx == 0)
-		reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG;
-	else
-		reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG;
-
+	/*
+	 * The mbox only provides ability to perform address matching
+	 * for the PLD events.
+	 */
+	if (reg_idx == 2) {
+		reg2->idx = EXTRA_REG_NHMEX_M_FILTER;
+		if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN)
+			reg2->config = event->attr.config2;
+		else
+			reg2->config = ~0ULL;
+		if (box->pmu->pmu_idx == 0)
+			reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG;
+		else
+			reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG;
+	}
 	return 0;
 }
 
@@ -1422,34 +1450,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per
 		wrmsrl(__BITS_VALUE(reg1->reg, 1, 16),
 			nhmex_mbox_shared_reg_config(box, idx));
 
-	wrmsrl(reg2->reg, 0);
-	if (reg2->config != ~0ULL) {
-		wrmsrl(reg2->reg + 1,
-			reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK);
-		wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK &
-			(reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT));
-		wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN);
+	if (reg2->idx != EXTRA_REG_NONE) {
+		wrmsrl(reg2->reg, 0);
+		if (reg2->config != ~0ULL) {
+			wrmsrl(reg2->reg + 1,
+				reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK);
+			wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK &
+				(reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT));
+			wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN);
+		}
 	}
 
 	wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0);
 }
 
-DEFINE_UNCORE_FORMAT_ATTR(count_mode,	count_mode,	"config:2-3");
-DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode,	"config:4-5");
-DEFINE_UNCORE_FORMAT_ATTR(wrap_mode,	wrap_mode,	"config:6");
-DEFINE_UNCORE_FORMAT_ATTR(flag_mode,	flag_mode,	"config:7");
-DEFINE_UNCORE_FORMAT_ATTR(inc_sel,	inc_sel,	"config:9-13");
-DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel,	set_flag_sel,	"config:19-21");
-DEFINE_UNCORE_FORMAT_ATTR(filter_cfg,	filter_cfg,	"config2:63");
-DEFINE_UNCORE_FORMAT_ATTR(filter_match,	filter_match,	"config2:0-33");
-DEFINE_UNCORE_FORMAT_ATTR(filter_mask,	filter_mask,	"config2:34-61");
-DEFINE_UNCORE_FORMAT_ATTR(dsp,		dsp,		"config1:0-31");
-DEFINE_UNCORE_FORMAT_ATTR(thr,		thr,		"config1:0-31");
-DEFINE_UNCORE_FORMAT_ATTR(fvc,		fvc,		"config1:0-31");
-DEFINE_UNCORE_FORMAT_ATTR(pgt,		pgt,		"config1:0-31");
-DEFINE_UNCORE_FORMAT_ATTR(map,		map,		"config1:0-31");
-DEFINE_UNCORE_FORMAT_ATTR(iss,		iss,		"config1:0-31");
-DEFINE_UNCORE_FORMAT_ATTR(pld,		pld,		"config1:32-63");
+DEFINE_UNCORE_FORMAT_ATTR(count_mode,		count_mode,	"config:2-3");
+DEFINE_UNCORE_FORMAT_ATTR(storage_mode,		storage_mode,	"config:4-5");
+DEFINE_UNCORE_FORMAT_ATTR(wrap_mode,		wrap_mode,	"config:6");
+DEFINE_UNCORE_FORMAT_ATTR(flag_mode,		flag_mode,	"config:7");
+DEFINE_UNCORE_FORMAT_ATTR(inc_sel,		inc_sel,	"config:9-13");
+DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel,		set_flag_sel,	"config:19-21");
+DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en,	filter_cfg_en,	"config2:63");
+DEFINE_UNCORE_FORMAT_ATTR(filter_match,		filter_match,	"config2:0-33");
+DEFINE_UNCORE_FORMAT_ATTR(filter_mask,		filter_mask,	"config2:34-61");
+DEFINE_UNCORE_FORMAT_ATTR(dsp,			dsp,		"config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(thr,			thr,		"config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(fvc,			fvc,		"config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(pgt,			pgt,		"config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(map,			map,		"config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(iss,			iss,		"config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(pld,			pld,		"config1:32-63");
 
 static struct attribute *nhmex_uncore_mbox_formats_attr[] = {
 	&format_attr_count_mode.attr,
@@ -1458,7 +1488,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = {
 	&format_attr_flag_mode.attr,
 	&format_attr_inc_sel.attr,
 	&format_attr_set_flag_sel.attr,
-	&format_attr_filter_cfg.attr,
+	&format_attr_filter_cfg_en.attr,
 	&format_attr_filter_match.attr,
 	&format_attr_filter_mask.attr,
 	&format_attr_dsp.attr,
@@ -1482,6 +1512,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = {
 	{ /* end: all zeroes */ },
 };
 
+static struct uncore_event_desc wsmex_uncore_mbox_events[] = {
+	INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"),
+	INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"),
+	{ /* end: all zeroes */ },
+};
+
 static struct intel_uncore_ops nhmex_uncore_mbox_ops = {
 	NHMEX_UNCORE_OPS_COMMON_INIT(),
 	.enable_event	= nhmex_mbox_msr_enable_event,
@@ -1513,7 +1549,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event)
 	struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
 	int port;
 
-	/* adjust the main event selector */
+	/* adjust the main event selector and extra register index */
 	if (reg1->idx % 2) {
 		reg1->idx--;
 		hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT;
@@ -1522,29 +1558,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event)
 		hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT;
 	}
 
-	/* adjust address or config of extra register */
+	/* adjust extra register config */
 	port = reg1->idx / 6 + box->pmu->pmu_idx * 4;
 	switch (reg1->idx % 6) {
-	case 0:
-		reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port);
-		break;
-	case 1:
-		reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port);
-		break;
 	case 2:
-		/* the 8~15 bits to the 0~7 bits */
+		/* shift the 8~15 bits to the 0~7 bits */
 		reg1->config >>= 8;
 		break;
 	case 3:
-		/* the 0~7 bits to the 8~15 bits */
+		/* shift the 0~7 bits to the 8~15 bits */
 		reg1->config <<= 8;
 		break;
-	case 4:
-		reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port);
-		break;
-	case 5:
-		reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port);
-		break;
 	};
 }
 
@@ -1671,7 +1695,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event
 	struct hw_perf_event *hwc = &event->hw;
 	struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
 	struct hw_perf_event_extra *reg2 = &event->hw.branch_reg;
-	int port, idx;
+	int idx;
 
 	idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >>
 		NHMEX_R_PMON_CTL_EV_SEL_SHIFT;
@@ -1681,27 +1705,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event
 	reg1->idx = idx;
 	reg1->config = event->attr.config1;
 
-	port = idx / 6 + box->pmu->pmu_idx * 4;
-	idx %= 6;
-	switch (idx) {
-	case 0:
-		reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port);
-		break;
-	case 1:
-		reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port);
-		break;
-	case 2:
-	case 3:
-		reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port);
-		break;
+	switch (idx % 6) {
 	case 4:
 	case 5:
-		if (idx == 4)
-			reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port);
-		else
-			reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port);
-		reg2->config = event->attr.config2;
 		hwc->config |= event->attr.config & (~0ULL << 32);
+		reg2->config = event->attr.config2;
 		break;
 	};
 	return 0;
@@ -1727,28 +1735,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per
 	struct hw_perf_event *hwc = &event->hw;
 	struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
 	struct hw_perf_event_extra *reg2 = &hwc->branch_reg;
-	int idx, er_idx;
+	int idx, port;
 
-	idx = reg1->idx % 6;
-	er_idx = idx;
-	if (er_idx > 2)
-		er_idx--;
-	er_idx += (reg1->idx / 6) * 5;
+	idx = reg1->idx;
+	port = idx / 6 + box->pmu->pmu_idx * 4;
 
-	switch (idx) {
+	switch (idx % 6) {
 	case 0:
+		wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config);
+		break;
 	case 1:
-		wrmsrl(reg1->reg, reg1->config);
+		wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config);
 		break;
 	case 2:
 	case 3:
-		wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx));
+		wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port),
+			nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5));
 		break;
 	case 4:
+		wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port),
+			hwc->config >> 32);
+		wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config);
+		wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config);
+		break;
 	case 5:
-		wrmsrl(reg1->reg, reg1->config);
-		wrmsrl(reg1->reg + 1, hwc->config >> 32);
-		wrmsrl(reg1->reg + 2, reg2->config);
+		wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port),
+			hwc->config >> 32);
+		wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config);
+		wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config);
 		break;
 	};
 
@@ -1756,8 +1770,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per
 		(hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK));
 }
 
-DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63");
-DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63");
+DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63");
+DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63");
 DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63");
 DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15");
 DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31");
@@ -1936,7 +1950,7 @@ struct intel_uncore_box *uncore_alloc_box(struct intel_uncore_type *type, int cp
 static struct intel_uncore_box *
 uncore_pmu_to_box(struct intel_uncore_pmu *pmu, int cpu)
 {
-	static struct intel_uncore_box *box;
+	struct intel_uncore_box *box;
 
 	box = *per_cpu_ptr(pmu->box, cpu);
 	if (box)
@@ -2303,6 +2317,7 @@ int uncore_pmu_event_init(struct perf_event *event)
 	event->hw.idx = -1;
 	event->hw.last_tag = ~0ULL;
 	event->hw.extra_reg.idx = EXTRA_REG_NONE;
+	event->hw.branch_reg.idx = EXTRA_REG_NONE;
 
 	if (event->attr.config == UNCORE_FIXED_EVENT) {
 		/* no fixed counter */
@@ -2332,6 +2347,27 @@ int uncore_pmu_event_init(struct perf_event *event)
 	return ret;
 }
 
+static ssize_t uncore_get_attr_cpumask(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int n = cpulist_scnprintf(buf, PAGE_SIZE - 2, &uncore_cpu_mask);
+
+	buf[n++] = '\n';
+	buf[n] = '\0';
+	return n;
+}
+
+static DEVICE_ATTR(cpumask, S_IRUGO, uncore_get_attr_cpumask, NULL);
+
+static struct attribute *uncore_pmu_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group uncore_pmu_attr_group = {
+	.attrs = uncore_pmu_attrs,
+};
+
 static int __init uncore_pmu_register(struct intel_uncore_pmu *pmu)
 {
 	int ret;
@@ -2369,11 +2405,11 @@ static void __init uncore_type_exit(struct intel_uncore_type *type)
 		free_percpu(type->pmus[i].box);
 	kfree(type->pmus);
 	type->pmus = NULL;
-	kfree(type->attr_groups[1]);
-	type->attr_groups[1] = NULL;
+	kfree(type->events_group);
+	type->events_group = NULL;
 }
 
-static void uncore_types_exit(struct intel_uncore_type **types)
+static void __init uncore_types_exit(struct intel_uncore_type **types)
 {
 	int i;
 	for (i = 0; types[i]; i++)
@@ -2422,9 +2458,10 @@ static int __init uncore_type_init(struct intel_uncore_type *type)
 		for (j = 0; j < i; j++)
 			attrs[j] = &type->event_descs[j].attr.attr;
 
-		type->attr_groups[1] = events_group;
+		type->events_group = events_group;
 	}
 
+	type->pmu_group = &uncore_pmu_attr_group;
 	type->pmus = pmus;
 	return 0;
 fail:
@@ -2814,7 +2851,13 @@ static int __init uncore_cpu_init(void)
 			snbep_uncore_cbox.num_boxes = max_cores;
 		msr_uncores = snbep_msr_uncores;
 		break;
-	case 46:
+	case 46: /* Nehalem-EX */
+		uncore_nhmex = true;
+	case 47: /* Westmere-EX aka. Xeon E7 */
+		if (!uncore_nhmex)
+			nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events;
+		if (nhmex_uncore_cbox.num_boxes > max_cores)
+			nhmex_uncore_cbox.num_boxes = max_cores;
 		msr_uncores = nhmex_msr_uncores;
 		break;
 	default:
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
index f3851892e077..e68a4550e952 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
@@ -5,7 +5,7 @@
 #include "perf_event.h"
 
 #define UNCORE_PMU_NAME_LEN		32
-#define UNCORE_PMU_HRTIMER_INTERVAL	(60 * NSEC_PER_SEC)
+#define UNCORE_PMU_HRTIMER_INTERVAL	(60LL * NSEC_PER_SEC)
 
 #define UNCORE_FIXED_EVENT		0xff
 #define UNCORE_PMC_IDX_MAX_GENERIC	8
@@ -230,6 +230,7 @@
 #define NHMEX_S1_MSR_MASK			0xe5a
 
 #define NHMEX_S_PMON_MM_CFG_EN			(0x1ULL << 63)
+#define NHMEX_S_EVENT_TO_R_PROG_EV		0
 
 /* NHM-EX Mbox */
 #define NHMEX_M0_MSR_GLOBAL_CTL			0xca0
@@ -275,18 +276,12 @@
 		 NHMEX_M_PMON_CTL_INC_SEL_MASK |	\
 		 NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK)
 
-
-#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK	0x1f
-#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK	(0x7 << 5)
-#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK	(0x7 << 8)
-#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR	(1 << 23)
-#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK			\
-		(NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK |	\
-		 NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK |	\
-		 NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK  |	\
-		 NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR)
+#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK		(((1 << 11) - 1) | (1 << 23))
 #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n)	(0x7 << (11 + 3 * (n)))
 
+#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK		(((1 << 12) - 1) | (1 << 24))
+#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n)	(0x7 << (12 + 3 * (n)))
+
 /*
  * use the 9~13 bits to select event If the 7th bit is not set,
  * otherwise use the 19~21 bits to select event.
@@ -368,15 +363,18 @@ struct intel_uncore_type {
 	unsigned num_shared_regs:8;
 	unsigned single_fixed:1;
 	unsigned pair_ctr_ctl:1;
+	unsigned *msr_offsets;
 	struct event_constraint unconstrainted;
 	struct event_constraint *constraints;
 	struct intel_uncore_pmu *pmus;
 	struct intel_uncore_ops *ops;
 	struct uncore_event_desc *event_descs;
-	const struct attribute_group *attr_groups[3];
+	const struct attribute_group *attr_groups[4];
 };
 
-#define format_group attr_groups[0]
+#define pmu_group attr_groups[0]
+#define format_group attr_groups[1]
+#define events_group attr_groups[2]
 
 struct intel_uncore_ops {
 	void (*init_box)(struct intel_uncore_box *);
@@ -485,29 +483,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx)
 	return idx * 8 + box->pmu->type->perf_ctr;
 }
 
-static inline
-unsigned uncore_msr_box_ctl(struct intel_uncore_box *box)
+static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box)
+{
+	struct intel_uncore_pmu *pmu = box->pmu;
+	return pmu->type->msr_offsets ?
+		pmu->type->msr_offsets[pmu->pmu_idx] :
+		pmu->type->msr_offset * pmu->pmu_idx;
+}
+
+static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box)
 {
 	if (!box->pmu->type->box_ctl)
 		return 0;
-	return box->pmu->type->box_ctl +
-		box->pmu->type->msr_offset * box->pmu->pmu_idx;
+	return box->pmu->type->box_ctl + uncore_msr_box_offset(box);
 }
 
-static inline
-unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box)
+static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box)
 {
 	if (!box->pmu->type->fixed_ctl)
 		return 0;
-	return box->pmu->type->fixed_ctl +
-		box->pmu->type->msr_offset * box->pmu->pmu_idx;
+	return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box);
 }
 
-static inline
-unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box)
+static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box)
 {
-	return box->pmu->type->fixed_ctr +
-		box->pmu->type->msr_offset * box->pmu->pmu_idx;
+	return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box);
 }
 
 static inline
@@ -515,7 +515,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx)
 {
 	return box->pmu->type->event_ctl +
 		(box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) +
-		box->pmu->type->msr_offset * box->pmu->pmu_idx;
+		uncore_msr_box_offset(box);
 }
 
 static inline
@@ -523,7 +523,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx)
 {
 	return box->pmu->type->perf_ctr +
 		(box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) +
-		box->pmu->type->msr_offset * box->pmu->pmu_idx;
+		uncore_msr_box_offset(box);
 }
 
 static inline
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 8022c6681485..fbd895562292 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -140,10 +140,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	if (*pos == 0)	/* just in case, cpu 0 is not the first */
-		*pos = cpumask_first(cpu_online_mask);
-	else
-		*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	*pos = cpumask_next(*pos - 1, cpu_online_mask);
 	if ((*pos) < nr_cpu_ids)
 		return &cpu_data(*pos);
 	return NULL;
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 39472dd2323f..60c78917190c 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -199,12 +199,14 @@ static int __init cpuid_init(void)
 		goto out_chrdev;
 	}
 	cpuid_class->devnode = cpuid_devnode;
+	get_online_cpus();
 	for_each_online_cpu(i) {
 		err = cpuid_device_create(i);
 		if (err != 0)
 			goto out_class;
 	}
 	register_hotcpu_notifier(&cpuid_class_cpu_notifier);
+	put_online_cpus();
 
 	err = 0;
 	goto out;
@@ -214,6 +216,7 @@ out_class:
 	for_each_online_cpu(i) {
 		cpuid_device_destroy(i);
 	}
+	put_online_cpus();
 	class_destroy(cpuid_class);
 out_chrdev:
 	__unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
@@ -225,11 +228,13 @@ static void __exit cpuid_exit(void)
 {
 	int cpu = 0;
 
+	get_online_cpus();
 	for_each_online_cpu(cpu)
 		cpuid_device_destroy(cpu);
 	class_destroy(cpuid_class);
 	__unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
 	unregister_hotcpu_notifier(&cpuid_class_cpu_notifier);
+	put_online_cpus();
 }
 
 module_init(cpuid_init);
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 3ae2ced4a874..b1581527a236 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -342,6 +342,47 @@ const struct irq_domain_ops ioapic_irq_domain_ops = {
 	.xlate = ioapic_xlate,
 };
 
+static void dt_add_ioapic_domain(unsigned int ioapic_num,
+		struct device_node *np)
+{
+	struct irq_domain *id;
+	struct mp_ioapic_gsi *gsi_cfg;
+	int ret;
+	int num;
+
+	gsi_cfg = mp_ioapic_gsi_routing(ioapic_num);
+	num = gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1;
+
+	id = irq_domain_add_linear(np, num, &ioapic_irq_domain_ops,
+			(void *)ioapic_num);
+	BUG_ON(!id);
+	if (gsi_cfg->gsi_base == 0) {
+		/*
+		 * The first NR_IRQS_LEGACY irq descs are allocated in
+		 * early_irq_init() and need just a mapping. The
+		 * remaining irqs need both. All of them are preallocated
+		 * and assigned so we can keep the 1:1 mapping which the ioapic
+		 * is having.
+		 */
+		ret = irq_domain_associate_many(id, 0, 0, NR_IRQS_LEGACY);
+		if (ret)
+			pr_err("Error mapping legacy IRQs: %d\n", ret);
+
+		if (num > NR_IRQS_LEGACY) {
+			ret = irq_create_strict_mappings(id, NR_IRQS_LEGACY,
+					NR_IRQS_LEGACY, num - NR_IRQS_LEGACY);
+			if (ret)
+				pr_err("Error creating mapping for the "
+						"remaining IRQs: %d\n", ret);
+		}
+		irq_set_default_host(id);
+	} else {
+		ret = irq_create_strict_mappings(id, gsi_cfg->gsi_base, 0, num);
+		if (ret)
+			pr_err("Error creating IRQ mapping: %d\n", ret);
+	}
+}
+
 static void __init ioapic_add_ofnode(struct device_node *np)
 {
 	struct resource r;
@@ -356,15 +397,7 @@ static void __init ioapic_add_ofnode(struct device_node *np)
 
 	for (i = 0; i < nr_ioapics; i++) {
 		if (r.start == mpc_ioapic_addr(i)) {
-			struct irq_domain *id;
-			struct mp_ioapic_gsi *gsi_cfg;
-
-			gsi_cfg = mp_ioapic_gsi_routing(i);
-
-			id = irq_domain_add_legacy(np, 32, gsi_cfg->gsi_base, 0,
-						   &ioapic_irq_domain_ops,
-						   (void*)i);
-			BUG_ON(!id);
+			dt_add_ioapic_domain(i, np);
 			return;
 		}
 	}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 623f28837476..0750e3ba87c0 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -57,6 +57,7 @@
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 #include <asm/asm.h>
+#include <asm/smap.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
 #include <linux/elf-em.h>
@@ -407,7 +408,9 @@ sysenter_past_esp:
  */
 	cmpl $__PAGE_OFFSET-3,%ebp
 	jae syscall_fault
+	ASM_STAC
 1:	movl (%ebp),%ebp
+	ASM_CLAC
 	movl %ebp,PT_EBP(%esp)
 	_ASM_EXTABLE(1b,syscall_fault)
 
@@ -488,6 +491,7 @@ ENDPROC(ia32_sysenter_target)
 	# system call handler stub
 ENTRY(system_call)
 	RING0_INT_FRAME			# can't unwind into user space anyway
+	ASM_CLAC
 	pushl_cfi %eax			# save orig_eax
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
@@ -670,6 +674,7 @@ END(syscall_exit_work)
 
 	RING0_INT_FRAME			# can't unwind into user space anyway
 syscall_fault:
+	ASM_CLAC
 	GET_THREAD_INFO(%ebp)
 	movl $-EFAULT,PT_EAX(%esp)
 	jmp resume_userspace
@@ -825,6 +830,7 @@ END(interrupt)
  */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
+	ASM_CLAC
 	addl $-0x80,(%esp)	/* Adjust vector into the [-256,-1] range */
 	SAVE_ALL
 	TRACE_IRQS_OFF
@@ -841,6 +847,7 @@ ENDPROC(common_interrupt)
 #define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
 	RING0_INT_FRAME;		\
+	ASM_CLAC;			\
 	pushl_cfi $~(nr);		\
 	SAVE_ALL;			\
 	TRACE_IRQS_OFF			\
@@ -857,6 +864,7 @@ ENDPROC(name)
 
 ENTRY(coprocessor_error)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi $do_coprocessor_error
 	jmp error_code
@@ -865,6 +873,7 @@ END(coprocessor_error)
 
 ENTRY(simd_coprocessor_error)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 #ifdef CONFIG_X86_INVD_BUG
 	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
@@ -886,6 +895,7 @@ END(simd_coprocessor_error)
 
 ENTRY(device_not_available)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $-1			# mark this as an int
 	pushl_cfi $do_device_not_available
 	jmp error_code
@@ -906,6 +916,7 @@ END(native_irq_enable_sysexit)
 
 ENTRY(overflow)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi $do_overflow
 	jmp error_code
@@ -914,6 +925,7 @@ END(overflow)
 
 ENTRY(bounds)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi $do_bounds
 	jmp error_code
@@ -922,6 +934,7 @@ END(bounds)
 
 ENTRY(invalid_op)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi $do_invalid_op
 	jmp error_code
@@ -930,6 +943,7 @@ END(invalid_op)
 
 ENTRY(coprocessor_segment_overrun)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi $do_coprocessor_segment_overrun
 	jmp error_code
@@ -938,6 +952,7 @@ END(coprocessor_segment_overrun)
 
 ENTRY(invalid_TSS)
 	RING0_EC_FRAME
+	ASM_CLAC
 	pushl_cfi $do_invalid_TSS
 	jmp error_code
 	CFI_ENDPROC
@@ -945,6 +960,7 @@ END(invalid_TSS)
 
 ENTRY(segment_not_present)
 	RING0_EC_FRAME
+	ASM_CLAC
 	pushl_cfi $do_segment_not_present
 	jmp error_code
 	CFI_ENDPROC
@@ -952,6 +968,7 @@ END(segment_not_present)
 
 ENTRY(stack_segment)
 	RING0_EC_FRAME
+	ASM_CLAC
 	pushl_cfi $do_stack_segment
 	jmp error_code
 	CFI_ENDPROC
@@ -959,6 +976,7 @@ END(stack_segment)
 
 ENTRY(alignment_check)
 	RING0_EC_FRAME
+	ASM_CLAC
 	pushl_cfi $do_alignment_check
 	jmp error_code
 	CFI_ENDPROC
@@ -966,6 +984,7 @@ END(alignment_check)
 
 ENTRY(divide_error)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0			# no error code
 	pushl_cfi $do_divide_error
 	jmp error_code
@@ -975,6 +994,7 @@ END(divide_error)
 #ifdef CONFIG_X86_MCE
 ENTRY(machine_check)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi machine_check_vector
 	jmp error_code
@@ -984,6 +1004,7 @@ END(machine_check)
 
 ENTRY(spurious_interrupt_bug)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $0
 	pushl_cfi $do_spurious_interrupt_bug
 	jmp error_code
@@ -1109,17 +1130,21 @@ ENTRY(ftrace_caller)
 	pushl %eax
 	pushl %ecx
 	pushl %edx
-	movl 0xc(%esp), %eax
+	pushl $0	/* Pass NULL as regs pointer */
+	movl 4*4(%esp), %eax
 	movl 0x4(%ebp), %edx
+	leal function_trace_op, %ecx
 	subl $MCOUNT_INSN_SIZE, %eax
 
 .globl ftrace_call
 ftrace_call:
 	call ftrace_stub
 
+	addl $4,%esp	/* skip NULL pointer */
 	popl %edx
 	popl %ecx
 	popl %eax
+ftrace_ret:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 .globl ftrace_graph_call
 ftrace_graph_call:
@@ -1131,6 +1156,71 @@ ftrace_stub:
 	ret
 END(ftrace_caller)
 
+ENTRY(ftrace_regs_caller)
+	pushf	/* push flags before compare (in cs location) */
+	cmpl $0, function_trace_stop
+	jne ftrace_restore_flags
+
+	/*
+	 * i386 does not save SS and ESP when coming from kernel.
+	 * Instead, to get sp, &regs->sp is used (see ptrace.h).
+	 * Unfortunately, that means eflags must be at the same location
+	 * as the current return ip is. We move the return ip into the
+	 * ip location, and move flags into the return ip location.
+	 */
+	pushl 4(%esp)	/* save return ip into ip slot */
+
+	pushl $0	/* Load 0 into orig_ax */
+	pushl %gs
+	pushl %fs
+	pushl %es
+	pushl %ds
+	pushl %eax
+	pushl %ebp
+	pushl %edi
+	pushl %esi
+	pushl %edx
+	pushl %ecx
+	pushl %ebx
+
+	movl 13*4(%esp), %eax	/* Get the saved flags */
+	movl %eax, 14*4(%esp)	/* Move saved flags into regs->flags location */
+				/* clobbering return ip */
+	movl $__KERNEL_CS,13*4(%esp)
+
+	movl 12*4(%esp), %eax	/* Load ip (1st parameter) */
+	subl $MCOUNT_INSN_SIZE, %eax	/* Adjust ip */
+	movl 0x4(%ebp), %edx	/* Load parent ip (2nd parameter) */
+	leal function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
+	pushl %esp		/* Save pt_regs as 4th parameter */
+
+GLOBAL(ftrace_regs_call)
+	call ftrace_stub
+
+	addl $4, %esp		/* Skip pt_regs */
+	movl 14*4(%esp), %eax	/* Move flags back into cs */
+	movl %eax, 13*4(%esp)	/* Needed to keep addl from modifying flags */
+	movl 12*4(%esp), %eax	/* Get return ip from regs->ip */
+	movl %eax, 14*4(%esp)	/* Put return ip back for ret */
+
+	popl %ebx
+	popl %ecx
+	popl %edx
+	popl %esi
+	popl %edi
+	popl %ebp
+	popl %eax
+	popl %ds
+	popl %es
+	popl %fs
+	popl %gs
+	addl $8, %esp		/* Skip orig_ax and ip */
+	popf			/* Pop flags at end (no addl to corrupt flags) */
+	jmp ftrace_ret
+
+ftrace_restore_flags:
+	popf
+	jmp  ftrace_stub
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
 ENTRY(mcount)
@@ -1171,9 +1261,6 @@ END(mcount)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
-	cmpl $0, function_trace_stop
-	jne ftrace_stub
-
 	pushl %eax
 	pushl %ecx
 	pushl %edx
@@ -1207,6 +1294,7 @@ return_to_handler:
 
 ENTRY(page_fault)
 	RING0_EC_FRAME
+	ASM_CLAC
 	pushl_cfi $do_page_fault
 	ALIGN
 error_code:
@@ -1279,6 +1367,7 @@ END(page_fault)
 
 ENTRY(debug)
 	RING0_INT_FRAME
+	ASM_CLAC
 	cmpl $ia32_sysenter_target,(%esp)
 	jne debug_stack_correct
 	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
@@ -1303,6 +1392,7 @@ END(debug)
  */
 ENTRY(nmi)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi %eax
 	movl %ss, %eax
 	cmpw $__ESPFIX_SS, %ax
@@ -1373,6 +1463,7 @@ END(nmi)
 
 ENTRY(int3)
 	RING0_INT_FRAME
+	ASM_CLAC
 	pushl_cfi $-1			# mark this as an int
 	SAVE_ALL
 	TRACE_IRQS_OFF
@@ -1393,6 +1484,7 @@ END(general_protection)
 #ifdef CONFIG_KVM_GUEST
 ENTRY(async_page_fault)
 	RING0_EC_FRAME
+	ASM_CLAC
 	pushl_cfi $do_async_page_fault
 	jmp error_code
 	CFI_ENDPROC
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 69babd8c834f..44531acd9a81 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -56,6 +56,8 @@
 #include <asm/ftrace.h>
 #include <asm/percpu.h>
 #include <asm/asm.h>
+#include <asm/rcu.h>
+#include <asm/smap.h>
 #include <linux/err.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
@@ -68,25 +70,51 @@
 	.section .entry.text, "ax"
 
 #ifdef CONFIG_FUNCTION_TRACER
+
+#ifdef CC_USING_FENTRY
+# define function_hook	__fentry__
+#else
+# define function_hook	mcount
+#endif
+
 #ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(mcount)
+
+ENTRY(function_hook)
 	retq
-END(mcount)
+END(function_hook)
+
+/* skip is set if stack has been adjusted */
+.macro ftrace_caller_setup skip=0
+	MCOUNT_SAVE_FRAME \skip
+
+	/* Load the ftrace_ops into the 3rd parameter */
+	leaq function_trace_op, %rdx
+
+	/* Load ip into the first parameter */
+	movq RIP(%rsp), %rdi
+	subq $MCOUNT_INSN_SIZE, %rdi
+	/* Load the parent_ip into the second parameter */
+#ifdef CC_USING_FENTRY
+	movq SS+16(%rsp), %rsi
+#else
+	movq 8(%rbp), %rsi
+#endif
+.endm
 
 ENTRY(ftrace_caller)
+	/* Check if tracing was disabled (quick check) */
 	cmpl $0, function_trace_stop
 	jne  ftrace_stub
 
-	MCOUNT_SAVE_FRAME
-
-	movq 0x38(%rsp), %rdi
-	movq 8(%rbp), %rsi
-	subq $MCOUNT_INSN_SIZE, %rdi
+	ftrace_caller_setup
+	/* regs go into 4th parameter (but make it NULL) */
+	movq $0, %rcx
 
 GLOBAL(ftrace_call)
 	call ftrace_stub
 
 	MCOUNT_RESTORE_FRAME
+ftrace_return:
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 GLOBAL(ftrace_graph_call)
@@ -97,8 +125,78 @@ GLOBAL(ftrace_stub)
 	retq
 END(ftrace_caller)
 
+ENTRY(ftrace_regs_caller)
+	/* Save the current flags before compare (in SS location)*/
+	pushfq
+
+	/* Check if tracing was disabled (quick check) */
+	cmpl $0, function_trace_stop
+	jne  ftrace_restore_flags
+
+	/* skip=8 to skip flags saved in SS */
+	ftrace_caller_setup 8
+
+	/* Save the rest of pt_regs */
+	movq %r15, R15(%rsp)
+	movq %r14, R14(%rsp)
+	movq %r13, R13(%rsp)
+	movq %r12, R12(%rsp)
+	movq %r11, R11(%rsp)
+	movq %r10, R10(%rsp)
+	movq %rbp, RBP(%rsp)
+	movq %rbx, RBX(%rsp)
+	/* Copy saved flags */
+	movq SS(%rsp), %rcx
+	movq %rcx, EFLAGS(%rsp)
+	/* Kernel segments */
+	movq $__KERNEL_DS, %rcx
+	movq %rcx, SS(%rsp)
+	movq $__KERNEL_CS, %rcx
+	movq %rcx, CS(%rsp)
+	/* Stack - skipping return address */
+	leaq SS+16(%rsp), %rcx
+	movq %rcx, RSP(%rsp)
+
+	/* regs go into 4th parameter */
+	leaq (%rsp), %rcx
+
+GLOBAL(ftrace_regs_call)
+	call ftrace_stub
+
+	/* Copy flags back to SS, to restore them */
+	movq EFLAGS(%rsp), %rax
+	movq %rax, SS(%rsp)
+
+	/* Handlers can change the RIP */
+	movq RIP(%rsp), %rax
+	movq %rax, SS+8(%rsp)
+
+	/* restore the rest of pt_regs */
+	movq R15(%rsp), %r15
+	movq R14(%rsp), %r14
+	movq R13(%rsp), %r13
+	movq R12(%rsp), %r12
+	movq R10(%rsp), %r10
+	movq RBP(%rsp), %rbp
+	movq RBX(%rsp), %rbx
+
+	/* skip=8 to skip flags saved in SS */
+	MCOUNT_RESTORE_FRAME 8
+
+	/* Restore flags */
+	popfq
+
+	jmp ftrace_return
+ftrace_restore_flags:
+	popfq
+	jmp  ftrace_stub
+
+END(ftrace_regs_caller)
+
+
 #else /* ! CONFIG_DYNAMIC_FTRACE */
-ENTRY(mcount)
+
+ENTRY(function_hook)
 	cmpl $0, function_trace_stop
 	jne  ftrace_stub
 
@@ -119,8 +217,12 @@ GLOBAL(ftrace_stub)
 trace:
 	MCOUNT_SAVE_FRAME
 
-	movq 0x38(%rsp), %rdi
+	movq RIP(%rsp), %rdi
+#ifdef CC_USING_FENTRY
+	movq SS+16(%rsp), %rsi
+#else
 	movq 8(%rbp), %rsi
+#endif
 	subq $MCOUNT_INSN_SIZE, %rdi
 
 	call   *ftrace_trace_function
@@ -128,20 +230,22 @@ trace:
 	MCOUNT_RESTORE_FRAME
 
 	jmp ftrace_stub
-END(mcount)
+END(function_hook)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_TRACER */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
-	cmpl $0, function_trace_stop
-	jne ftrace_stub
-
 	MCOUNT_SAVE_FRAME
 
+#ifdef CC_USING_FENTRY
+	leaq SS+16(%rsp), %rdi
+	movq $0, %rdx	/* No framepointers needed */
+#else
 	leaq 8(%rbp), %rdi
-	movq 0x38(%rsp), %rsi
 	movq (%rbp), %rdx
+#endif
+	movq RIP(%rsp), %rsi
 	subq $MCOUNT_INSN_SIZE, %rsi
 
 	call	prepare_ftrace_return
@@ -342,15 +446,15 @@ ENDPROC(native_usergs_sysret64)
 	.macro SAVE_ARGS_IRQ
 	cld
 	/* start from rbp in pt_regs and jump over */
-	movq_cfi rdi, RDI-RBP
-	movq_cfi rsi, RSI-RBP
-	movq_cfi rdx, RDX-RBP
-	movq_cfi rcx, RCX-RBP
-	movq_cfi rax, RAX-RBP
-	movq_cfi  r8,  R8-RBP
-	movq_cfi  r9,  R9-RBP
-	movq_cfi r10, R10-RBP
-	movq_cfi r11, R11-RBP
+	movq_cfi rdi, (RDI-RBP)
+	movq_cfi rsi, (RSI-RBP)
+	movq_cfi rdx, (RDX-RBP)
+	movq_cfi rcx, (RCX-RBP)
+	movq_cfi rax, (RAX-RBP)
+	movq_cfi  r8,  (R8-RBP)
+	movq_cfi  r9,  (R9-RBP)
+	movq_cfi r10, (R10-RBP)
+	movq_cfi r11, (R11-RBP)
 
 	/* Save rbp so that we can unwind from get_irq_regs() */
 	movq_cfi rbp, 0
@@ -384,7 +488,7 @@ ENDPROC(native_usergs_sysret64)
 	.endm
 
 ENTRY(save_rest)
-	PARTIAL_FRAME 1 REST_SKIP+8
+	PARTIAL_FRAME 1 (REST_SKIP+8)
 	movq 5*8+16(%rsp), %r11	/* save return address */
 	movq_cfi rbx, RBX+16
 	movq_cfi rbp, RBP+16
@@ -440,7 +544,7 @@ ENTRY(ret_from_fork)
 
 	LOCK ; btr $TIF_FORK,TI_flags(%r8)
 
-	pushq_cfi kernel_eflags(%rip)
+	pushq_cfi $0x0002
 	popfq_cfi				# reset kernel eflags
 
 	call schedule_tail			# rdi: 'prev' task parameter
@@ -465,7 +569,8 @@ END(ret_from_fork)
  * System call entry. Up to 6 arguments in registers are supported.
  *
  * SYSCALL does not save anything on the stack and does not change the
- * stack pointer.
+ * stack pointer.  However, it does mask the flags register for us, so
+ * CLD and CLAC are not needed.
  */
 
 /*
@@ -565,7 +670,7 @@ sysret_careful:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq_cfi %rdi
-	call schedule
+	SCHEDULE_USER
 	popq_cfi %rdi
 	jmp sysret_check
 
@@ -678,7 +783,7 @@ int_careful:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq_cfi %rdi
-	call schedule
+	SCHEDULE_USER
 	popq_cfi %rdi
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
@@ -884,6 +989,7 @@ END(interrupt)
 	 */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
+	ASM_CLAC
 	XCPT_FRAME
 	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
@@ -974,7 +1080,7 @@ retint_careful:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq_cfi %rdi
-	call  schedule
+	SCHEDULE_USER
 	popq_cfi %rdi
 	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -1023,6 +1129,7 @@ END(common_interrupt)
  */
 .macro apicinterrupt num sym do_sym
 ENTRY(\sym)
+	ASM_CLAC
 	INTR_FRAME
 	pushq_cfi $~(\num)
 .Lcommon_\sym:
@@ -1077,6 +1184,7 @@ apicinterrupt IRQ_WORK_VECTOR \
  */
 .macro zeroentry sym do_sym
 ENTRY(\sym)
+	ASM_CLAC
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
@@ -1094,6 +1202,7 @@ END(\sym)
 
 .macro paranoidzeroentry sym do_sym
 ENTRY(\sym)
+	ASM_CLAC
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
@@ -1112,6 +1221,7 @@ END(\sym)
 #define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
 .macro paranoidzeroentry_ist sym do_sym ist
 ENTRY(\sym)
+	ASM_CLAC
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
@@ -1131,6 +1241,7 @@ END(\sym)
 
 .macro errorentry sym do_sym
 ENTRY(\sym)
+	ASM_CLAC
 	XCPT_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	subq $ORIG_RAX-R15, %rsp
@@ -1149,6 +1260,7 @@ END(\sym)
 	/* error code is on the stack already */
 .macro paranoiderrorentry sym do_sym
 ENTRY(\sym)
+	ASM_CLAC
 	XCPT_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	subq $ORIG_RAX-R15, %rsp
@@ -1449,7 +1561,7 @@ paranoid_userspace:
 paranoid_schedule:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_ANY)
-	call schedule
+	SCHEDULE_USER
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	jmp paranoid_userspace
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index c3a7cb4bf6e6..1d414029f1d8 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -206,6 +206,21 @@ static int
 ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
 		   unsigned const char *new_code);
 
+/*
+ * Should never be called:
+ *  As it is only called by __ftrace_replace_code() which is called by
+ *  ftrace_replace_code() that x86 overrides, and by ftrace_update_code()
+ *  which is called to turn mcount into nops or nops into function calls
+ *  but not to convert a function from not using regs to one that uses
+ *  regs, which ftrace_modify_call() is for.
+ */
+int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+				 unsigned long addr)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned long ip = (unsigned long)(&ftrace_call);
@@ -220,6 +235,14 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 
 	ret = ftrace_modify_code(ip, old, new);
 
+	/* Also update the regs callback function */
+	if (!ret) {
+		ip = (unsigned long)(&ftrace_regs_call);
+		memcpy(old, &ftrace_regs_call, MCOUNT_INSN_SIZE);
+		new = ftrace_call_replace(ip, (unsigned long)func);
+		ret = ftrace_modify_code(ip, old, new);
+	}
+
 	atomic_dec(&modifying_ftrace_code);
 
 	return ret;
@@ -299,6 +322,32 @@ static int add_brk_on_nop(struct dyn_ftrace *rec)
 	return add_break(rec->ip, old);
 }
 
+/*
+ * If the record has the FTRACE_FL_REGS set, that means that it
+ * wants to convert to a callback that saves all regs. If FTRACE_FL_REGS
+ * is not not set, then it wants to convert to the normal callback.
+ */
+static unsigned long get_ftrace_addr(struct dyn_ftrace *rec)
+{
+	if (rec->flags & FTRACE_FL_REGS)
+		return (unsigned long)FTRACE_REGS_ADDR;
+	else
+		return (unsigned long)FTRACE_ADDR;
+}
+
+/*
+ * The FTRACE_FL_REGS_EN is set when the record already points to
+ * a function that saves all the regs. Basically the '_EN' version
+ * represents the current state of the function.
+ */
+static unsigned long get_ftrace_old_addr(struct dyn_ftrace *rec)
+{
+	if (rec->flags & FTRACE_FL_REGS_EN)
+		return (unsigned long)FTRACE_REGS_ADDR;
+	else
+		return (unsigned long)FTRACE_ADDR;
+}
+
 static int add_breakpoints(struct dyn_ftrace *rec, int enable)
 {
 	unsigned long ftrace_addr;
@@ -306,7 +355,7 @@ static int add_breakpoints(struct dyn_ftrace *rec, int enable)
 
 	ret = ftrace_test_record(rec, enable);
 
-	ftrace_addr = (unsigned long)FTRACE_ADDR;
+	ftrace_addr = get_ftrace_addr(rec);
 
 	switch (ret) {
 	case FTRACE_UPDATE_IGNORE:
@@ -316,6 +365,10 @@ static int add_breakpoints(struct dyn_ftrace *rec, int enable)
 		/* converting nop to call */
 		return add_brk_on_nop(rec);
 
+	case FTRACE_UPDATE_MODIFY_CALL_REGS:
+	case FTRACE_UPDATE_MODIFY_CALL:
+		ftrace_addr = get_ftrace_old_addr(rec);
+		/* fall through */
 	case FTRACE_UPDATE_MAKE_NOP:
 		/* converting a call to a nop */
 		return add_brk_on_call(rec, ftrace_addr);
@@ -360,13 +413,21 @@ static int remove_breakpoint(struct dyn_ftrace *rec)
 		 * If not, don't touch the breakpoint, we make just create
 		 * a disaster.
 		 */
-		ftrace_addr = (unsigned long)FTRACE_ADDR;
+		ftrace_addr = get_ftrace_addr(rec);
+		nop = ftrace_call_replace(ip, ftrace_addr);
+
+		if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) == 0)
+			goto update;
+
+		/* Check both ftrace_addr and ftrace_old_addr */
+		ftrace_addr = get_ftrace_old_addr(rec);
 		nop = ftrace_call_replace(ip, ftrace_addr);
 
 		if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0)
 			return -EINVAL;
 	}
 
+ update:
 	return probe_kernel_write((void *)ip, &nop[0], 1);
 }
 
@@ -405,12 +466,14 @@ static int add_update(struct dyn_ftrace *rec, int enable)
 
 	ret = ftrace_test_record(rec, enable);
 
-	ftrace_addr = (unsigned long)FTRACE_ADDR;
+	ftrace_addr  = get_ftrace_addr(rec);
 
 	switch (ret) {
 	case FTRACE_UPDATE_IGNORE:
 		return 0;
 
+	case FTRACE_UPDATE_MODIFY_CALL_REGS:
+	case FTRACE_UPDATE_MODIFY_CALL:
 	case FTRACE_UPDATE_MAKE_CALL:
 		/* converting nop to call */
 		return add_update_call(rec, ftrace_addr);
@@ -455,12 +518,14 @@ static int finish_update(struct dyn_ftrace *rec, int enable)
 
 	ret = ftrace_update_record(rec, enable);
 
-	ftrace_addr = (unsigned long)FTRACE_ADDR;
+	ftrace_addr = get_ftrace_addr(rec);
 
 	switch (ret) {
 	case FTRACE_UPDATE_IGNORE:
 		return 0;
 
+	case FTRACE_UPDATE_MODIFY_CALL_REGS:
+	case FTRACE_UPDATE_MODIFY_CALL:
 	case FTRACE_UPDATE_MAKE_CALL:
 		/* converting nop to call */
 		return finish_update_call(rec, ftrace_addr);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index d42ab17b7397..957a47aec64e 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -287,27 +287,28 @@ ENTRY(startup_32_smp)
 	leal -__PAGE_OFFSET(%ecx),%esp
 
 default_entry:
-
 /*
  *	New page tables may be in 4Mbyte page mode and may
  *	be using the global pages. 
  *
  *	NOTE! If we are on a 486 we may have no cr4 at all!
- *	So we do not try to touch it unless we really have
- *	some bits in it to set.  This won't work if the BSP
- *	implements cr4 but this AP does not -- very unlikely
- *	but be warned!  The same applies to the pse feature
- *	if not equally supported. --macro
- *
- *	NOTE! We have to correct for the fact that we're
- *	not yet offset PAGE_OFFSET..
+ *	Specifically, cr4 exists if and only if CPUID exists,
+ *	which in turn exists if and only if EFLAGS.ID exists.
  */
-#define cr4_bits pa(mmu_cr4_features)
-	movl cr4_bits,%edx
-	andl %edx,%edx
-	jz 6f
-	movl %cr4,%eax		# Turn on paging options (PSE,PAE,..)
-	orl %edx,%eax
+	movl $X86_EFLAGS_ID,%ecx
+	pushl %ecx
+	popfl
+	pushfl
+	popl %eax
+	pushl $0
+	popfl
+	pushfl
+	popl %edx
+	xorl %edx,%eax
+	testl %ecx,%eax
+	jz 6f			# No ID flag = no CPUID = no CR4
+
+	movl pa(mmu_cr4_features),%eax
 	movl %eax,%cr4
 
 	testb $X86_CR4_PAE, %al		# check if PAE is enabled
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index f250431fb505..675a05012449 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -19,24 +19,17 @@
 #include <asm/fpu-internal.h>
 #include <asm/user.h>
 
-#ifdef CONFIG_X86_64
-# include <asm/sigcontext32.h>
-# include <asm/user32.h>
-#else
-# define save_i387_xstate_ia32		save_i387_xstate
-# define restore_i387_xstate_ia32	restore_i387_xstate
-# define _fpstate_ia32		_fpstate
-# define _xstate_ia32		_xstate
-# define sig_xstate_ia32_size   sig_xstate_size
-# define fx_sw_reserved_ia32	fx_sw_reserved
-# define user_i387_ia32_struct	user_i387_struct
-# define user32_fxsr_struct	user_fxsr_struct
-#endif
-
 /*
  * Were we in an interrupt that interrupted kernel mode?
  *
- * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * For now, with eagerfpu we will return interrupted kernel FPU
+ * state as not-idle. TBD: Ideally we can change the return value
+ * to something like __thread_has_fpu(current). But we need to
+ * be careful of doing __thread_clear_has_fpu() before saving
+ * the FPU etc for supporting nested uses etc. For now, take
+ * the simple route!
+ *
+ * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that
  * pair does nothing at all: the thread must not have fpu (so
  * that we don't try to save the FPU state), and TS must
  * be set (so that the clts/stts pair does nothing that is
@@ -44,6 +37,9 @@
  */
 static inline bool interrupted_kernel_fpu_idle(void)
 {
+	if (use_eager_fpu())
+		return 0;
+
 	return !__thread_has_fpu(current) &&
 		(read_cr0() & X86_CR0_TS);
 }
@@ -77,29 +73,29 @@ bool irq_fpu_usable(void)
 }
 EXPORT_SYMBOL(irq_fpu_usable);
 
-void kernel_fpu_begin(void)
+void __kernel_fpu_begin(void)
 {
 	struct task_struct *me = current;
 
-	WARN_ON_ONCE(!irq_fpu_usable());
-	preempt_disable();
 	if (__thread_has_fpu(me)) {
 		__save_init_fpu(me);
 		__thread_clear_has_fpu(me);
-		/* We do 'stts()' in kernel_fpu_end() */
-	} else {
+		/* We do 'stts()' in __kernel_fpu_end() */
+	} else if (!use_eager_fpu()) {
 		this_cpu_write(fpu_owner_task, NULL);
 		clts();
 	}
 }
-EXPORT_SYMBOL(kernel_fpu_begin);
+EXPORT_SYMBOL(__kernel_fpu_begin);
 
-void kernel_fpu_end(void)
+void __kernel_fpu_end(void)
 {
-	stts();
-	preempt_enable();
+	if (use_eager_fpu())
+		math_state_restore();
+	else
+		stts();
 }
-EXPORT_SYMBOL(kernel_fpu_end);
+EXPORT_SYMBOL(__kernel_fpu_end);
 
 void unlazy_fpu(struct task_struct *tsk)
 {
@@ -113,23 +109,15 @@ void unlazy_fpu(struct task_struct *tsk)
 }
 EXPORT_SYMBOL(unlazy_fpu);
 
-#ifdef CONFIG_MATH_EMULATION
-# define HAVE_HWFP		(boot_cpu_data.hard_math)
-#else
-# define HAVE_HWFP		1
-#endif
-
-static unsigned int		mxcsr_feature_mask __read_mostly = 0xffffffffu;
+unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
-unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32);
 static struct i387_fxsave_struct fx_scratch __cpuinitdata;
 
 static void __cpuinit mxcsr_feature_mask_init(void)
 {
 	unsigned long mask = 0;
 
-	clts();
 	if (cpu_has_fxsr) {
 		memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
 		asm volatile("fxsave %0" : : "m" (fx_scratch));
@@ -138,7 +126,6 @@ static void __cpuinit mxcsr_feature_mask_init(void)
 			mask = 0x0000ffbf;
 	}
 	mxcsr_feature_mask &= mask;
-	stts();
 }
 
 static void __cpuinit init_thread_xstate(void)
@@ -192,9 +179,8 @@ void __cpuinit fpu_init(void)
 		init_thread_xstate();
 
 	mxcsr_feature_mask_init();
-	/* clean state in init */
-	current_thread_info()->status = 0;
-	clear_used_math();
+	xsave_init();
+	eager_fpu_init();
 }
 
 void fpu_finit(struct fpu *fpu)
@@ -205,12 +191,7 @@ void fpu_finit(struct fpu *fpu)
 	}
 
 	if (cpu_has_fxsr) {
-		struct i387_fxsave_struct *fx = &fpu->state->fxsave;
-
-		memset(fx, 0, xstate_size);
-		fx->cwd = 0x37f;
-		if (cpu_has_xmm)
-			fx->mxcsr = MXCSR_DEFAULT;
+		fx_finit(&fpu->state->fxsave);
 	} else {
 		struct i387_fsave_struct *fp = &fpu->state->fsave;
 		memset(fp, 0, xstate_size);
@@ -454,7 +435,7 @@ static inline u32 twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave)
  * FXSR floating point environment conversions.
  */
 
-static void
+void
 convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
 {
 	struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave;
@@ -491,8 +472,8 @@ convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
 		memcpy(&to[i], &from[i], sizeof(to[0]));
 }
 
-static void convert_to_fxsr(struct task_struct *tsk,
-			    const struct user_i387_ia32_struct *env)
+void convert_to_fxsr(struct task_struct *tsk,
+		     const struct user_i387_ia32_struct *env)
 
 {
 	struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave;
@@ -589,223 +570,6 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 }
 
 /*
- * Signal frame handlers.
- */
-
-static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
-{
-	struct task_struct *tsk = current;
-	struct i387_fsave_struct *fp = &tsk->thread.fpu.state->fsave;
-
-	fp->status = fp->swd;
-	if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
-		return -1;
-	return 1;
-}
-
-static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
-{
-	struct task_struct *tsk = current;
-	struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave;
-	struct user_i387_ia32_struct env;
-	int err = 0;
-
-	convert_from_fxsr(&env, tsk);
-	if (__copy_to_user(buf, &env, sizeof(env)))
-		return -1;
-
-	err |= __put_user(fx->swd, &buf->status);
-	err |= __put_user(X86_FXSR_MAGIC, &buf->magic);
-	if (err)
-		return -1;
-
-	if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size))
-		return -1;
-	return 1;
-}
-
-static int save_i387_xsave(void __user *buf)
-{
-	struct task_struct *tsk = current;
-	struct _fpstate_ia32 __user *fx = buf;
-	int err = 0;
-
-
-	sanitize_i387_state(tsk);
-
-	/*
-	 * For legacy compatible, we always set FP/SSE bits in the bit
-	 * vector while saving the state to the user context.
-	 * This will enable us capturing any changes(during sigreturn) to
-	 * the FP/SSE bits by the legacy applications which don't touch
-	 * xstate_bv in the xsave header.
-	 *
-	 * xsave aware applications can change the xstate_bv in the xsave
-	 * header as well as change any contents in the memory layout.
-	 * xrestore as part of sigreturn will capture all the changes.
-	 */
-	tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
-
-	if (save_i387_fxsave(fx) < 0)
-		return -1;
-
-	err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32,
-			     sizeof(struct _fpx_sw_bytes));
-	err |= __put_user(FP_XSTATE_MAGIC2,
-			  (__u32 __user *) (buf + sig_xstate_ia32_size
-					    - FP_XSTATE_MAGIC2_SIZE));
-	if (err)
-		return -1;
-
-	return 1;
-}
-
-int save_i387_xstate_ia32(void __user *buf)
-{
-	struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
-	struct task_struct *tsk = current;
-
-	if (!used_math())
-		return 0;
-
-	if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size))
-		return -EACCES;
-	/*
-	 * This will cause a "finit" to be triggered by the next
-	 * attempted FPU operation by the 'current' process.
-	 */
-	clear_used_math();
-
-	if (!HAVE_HWFP) {
-		return fpregs_soft_get(current, NULL,
-				       0, sizeof(struct user_i387_ia32_struct),
-				       NULL, fp) ? -1 : 1;
-	}
-
-	unlazy_fpu(tsk);
-
-	if (cpu_has_xsave)
-		return save_i387_xsave(fp);
-	if (cpu_has_fxsr)
-		return save_i387_fxsave(fp);
-	else
-		return save_i387_fsave(fp);
-}
-
-static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
-{
-	struct task_struct *tsk = current;
-
-	return __copy_from_user(&tsk->thread.fpu.state->fsave, buf,
-				sizeof(struct i387_fsave_struct));
-}
-
-static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf,
-			       unsigned int size)
-{
-	struct task_struct *tsk = current;
-	struct user_i387_ia32_struct env;
-	int err;
-
-	err = __copy_from_user(&tsk->thread.fpu.state->fxsave, &buf->_fxsr_env[0],
-			       size);
-	/* mxcsr reserved bits must be masked to zero for security reasons */
-	tsk->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
-	if (err || __copy_from_user(&env, buf, sizeof(env)))
-		return 1;
-	convert_to_fxsr(tsk, &env);
-
-	return 0;
-}
-
-static int restore_i387_xsave(void __user *buf)
-{
-	struct _fpx_sw_bytes fx_sw_user;
-	struct _fpstate_ia32 __user *fx_user =
-			((struct _fpstate_ia32 __user *) buf);
-	struct i387_fxsave_struct __user *fx =
-		(struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0];
-	struct xsave_hdr_struct *xsave_hdr =
-				&current->thread.fpu.state->xsave.xsave_hdr;
-	u64 mask;
-	int err;
-
-	if (check_for_xstate(fx, buf, &fx_sw_user))
-		goto fx_only;
-
-	mask = fx_sw_user.xstate_bv;
-
-	err = restore_i387_fxsave(buf, fx_sw_user.xstate_size);
-
-	xsave_hdr->xstate_bv &= pcntxt_mask;
-	/*
-	 * These bits must be zero.
-	 */
-	xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
-
-	/*
-	 * Init the state that is not present in the memory layout
-	 * and enabled by the OS.
-	 */
-	mask = ~(pcntxt_mask & ~mask);
-	xsave_hdr->xstate_bv &= mask;
-
-	return err;
-fx_only:
-	/*
-	 * Couldn't find the extended state information in the memory
-	 * layout. Restore the FP/SSE and init the other extended state
-	 * enabled by the OS.
-	 */
-	xsave_hdr->xstate_bv = XSTATE_FPSSE;
-	return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct));
-}
-
-int restore_i387_xstate_ia32(void __user *buf)
-{
-	int err;
-	struct task_struct *tsk = current;
-	struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
-
-	if (HAVE_HWFP)
-		clear_fpu(tsk);
-
-	if (!buf) {
-		if (used_math()) {
-			clear_fpu(tsk);
-			clear_used_math();
-		}
-
-		return 0;
-	} else
-		if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size))
-			return -EACCES;
-
-	if (!used_math()) {
-		err = init_fpu(tsk);
-		if (err)
-			return err;
-	}
-
-	if (HAVE_HWFP) {
-		if (cpu_has_xsave)
-			err = restore_i387_xsave(buf);
-		else if (cpu_has_fxsr)
-			err = restore_i387_fxsave(fp, sizeof(struct
-							   i387_fxsave_struct));
-		else
-			err = restore_i387_fsave(fp);
-	} else {
-		err = fpregs_soft_set(current, NULL,
-				      0, sizeof(struct user_i387_ia32_struct),
-				      NULL, fp) != 0;
-	}
-	set_used_math();
-
-	return err;
-}
-
-/*
  * FPU state for core dumps.
  * This is only used for a.out dumps now.
  * It is declared generically using elf_fpregset_t (which is
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 36d1853e91af..9a5c460404dc 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -263,7 +263,7 @@ static void i8259A_shutdown(void)
 	 * out of.
 	 */
 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
-	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
 }
 
 static struct syscore_ops i8259_syscore_ops = {
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 1f5f1d5d2a02..e4595f105910 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -92,7 +92,8 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	seq_printf(p, "  Rescheduling interrupts\n");
 	seq_printf(p, "%*s: ", prec, "CAL");
 	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
+		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count -
+					irq_stats(j)->irq_tlb_count);
 	seq_printf(p, "  Function call interrupts\n");
 	seq_printf(p, "%*s: ", prec, "TLB");
 	for_each_online_cpu(j)
@@ -147,7 +148,6 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 #ifdef CONFIG_SMP
 	sum += irq_stats(cpu)->irq_resched_count;
 	sum += irq_stats(cpu)->irq_call_count;
-	sum += irq_stats(cpu)->irq_tlb_count;
 #endif
 #ifdef CONFIG_X86_THERMAL_VECTOR
 	sum += irq_stats(cpu)->irq_thermal_count;
@@ -270,7 +270,7 @@ void fixup_irqs(void)
 
 		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
 			break_affinity = 1;
-			affinity = cpu_all_mask;
+			affinity = cpu_online_mask;
 		}
 
 		chip = irq_data_get_irq_chip(data);
@@ -328,6 +328,7 @@ void fixup_irqs(void)
 				chip->irq_retrigger(data);
 			raw_spin_unlock(&desc->lock);
 		}
+		__this_cpu_write(vector_irq[vector], -1);
 	}
 }
 #endif
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index 1d5d31ea686b..dc1404bf8e4b 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -107,7 +107,7 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 {
 	struct setup_data_node *node;
 	struct setup_data *data;
-	int error = -ENOMEM;
+	int error;
 	struct dentry *d;
 	struct page *pg;
 	u64 pa_data;
@@ -121,8 +121,10 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 
 	while (pa_data) {
 		node = kmalloc(sizeof(*node), GFP_KERNEL);
-		if (!node)
+		if (!node) {
+			error = -ENOMEM;
 			goto err_dir;
+		}
 
 		pg = pfn_to_page((pa_data+sizeof(*data)-1) >> PAGE_SHIFT);
 		if (PageHighMem(pg)) {
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index e2f751efb7b1..57916c0d3cf6 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -541,6 +541,23 @@ reenter_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb
 	return 1;
 }
 
+#ifdef KPROBES_CAN_USE_FTRACE
+static void __kprobes skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+				      struct kprobe_ctlblk *kcb)
+{
+	/*
+	 * Emulate singlestep (and also recover regs->ip)
+	 * as if there is a 5byte nop
+	 */
+	regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
+	if (unlikely(p->post_handler)) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		p->post_handler(p, regs, 0);
+	}
+	__this_cpu_write(current_kprobe, NULL);
+}
+#endif
+
 /*
  * Interrupts are disabled on entry as trap3 is an interrupt gate and they
  * remain disabled throughout this function.
@@ -599,6 +616,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	} else if (kprobe_running()) {
 		p = __this_cpu_read(current_kprobe);
 		if (p->break_handler && p->break_handler(p, regs)) {
+#ifdef KPROBES_CAN_USE_FTRACE
+			if (kprobe_ftrace(p)) {
+				skip_singlestep(p, regs, kcb);
+				return 1;
+			}
+#endif
 			setup_singlestep(p, regs, kcb, 0);
 			return 1;
 		}
@@ -1052,6 +1075,50 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
+#ifdef KPROBES_CAN_USE_FTRACE
+/* Ftrace callback handler for kprobes */
+void __kprobes kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+				     struct ftrace_ops *ops, struct pt_regs *regs)
+{
+	struct kprobe *p;
+	struct kprobe_ctlblk *kcb;
+	unsigned long flags;
+
+	/* Disable irq for emulating a breakpoint and avoiding preempt */
+	local_irq_save(flags);
+
+	p = get_kprobe((kprobe_opcode_t *)ip);
+	if (unlikely(!p) || kprobe_disabled(p))
+		goto end;
+
+	kcb = get_kprobe_ctlblk();
+	if (kprobe_running()) {
+		kprobes_inc_nmissed_count(p);
+	} else {
+		/* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
+		regs->ip = ip + sizeof(kprobe_opcode_t);
+
+		__this_cpu_write(current_kprobe, p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+		if (!p->pre_handler || !p->pre_handler(p, regs))
+			skip_singlestep(p, regs, kcb);
+		/*
+		 * If pre_handler returns !0, it sets regs->ip and
+		 * resets current kprobe.
+		 */
+	}
+end:
+	local_irq_restore(flags);
+}
+
+int __kprobes arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+	p->ainsn.insn = NULL;
+	p->ainsn.boostable = -1;
+	return 0;
+}
+#endif
+
 int __init arch_init_kprobes(void)
 {
 	return arch_init_optprobes();
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index c1d61ee4b4f1..b3e5e51bc907 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -354,6 +354,7 @@ static void kvm_pv_guest_cpu_reboot(void *unused)
 	if (kvm_para_has_feature(KVM_FEATURE_PV_EOI))
 		wrmsrl(MSR_KVM_PV_EOI_EN, 0);
 	kvm_pv_disable_apf();
+	kvm_disable_steal_time();
 }
 
 static int kvm_pv_reboot_notify(struct notifier_block *nb,
@@ -396,9 +397,7 @@ void kvm_disable_steal_time(void)
 #ifdef CONFIG_SMP
 static void __init kvm_smp_prepare_boot_cpu(void)
 {
-#ifdef CONFIG_KVM_CLOCK
 	WARN_ON(kvm_register_clock("primary cpu clock"));
-#endif
 	kvm_guest_cpu_init();
 	native_smp_prepare_boot_cpu();
 }
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 8a2ce8fd41c0..7720ff5a9ee2 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -75,20 +75,113 @@ struct microcode_amd {
 
 static struct equiv_cpu_entry *equiv_cpu_table;
 
-/* page-sized ucode patch buffer */
-void *patch;
+struct ucode_patch {
+	struct list_head plist;
+	void *data;
+	u32 patch_id;
+	u16 equiv_cpu;
+};
+
+static LIST_HEAD(pcache);
+
+static u16 find_equiv_id(unsigned int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	int i = 0;
+
+	if (!equiv_cpu_table)
+		return 0;
+
+	while (equiv_cpu_table[i].installed_cpu != 0) {
+		if (uci->cpu_sig.sig == equiv_cpu_table[i].installed_cpu)
+			return equiv_cpu_table[i].equiv_cpu;
+
+		i++;
+	}
+	return 0;
+}
+
+static u32 find_cpu_family_by_equiv_cpu(u16 equiv_cpu)
+{
+	int i = 0;
+
+	BUG_ON(!equiv_cpu_table);
+
+	while (equiv_cpu_table[i].equiv_cpu != 0) {
+		if (equiv_cpu == equiv_cpu_table[i].equiv_cpu)
+			return equiv_cpu_table[i].installed_cpu;
+		i++;
+	}
+	return 0;
+}
+
+/*
+ * a small, trivial cache of per-family ucode patches
+ */
+static struct ucode_patch *cache_find_patch(u16 equiv_cpu)
+{
+	struct ucode_patch *p;
+
+	list_for_each_entry(p, &pcache, plist)
+		if (p->equiv_cpu == equiv_cpu)
+			return p;
+	return NULL;
+}
+
+static void update_cache(struct ucode_patch *new_patch)
+{
+	struct ucode_patch *p;
+
+	list_for_each_entry(p, &pcache, plist) {
+		if (p->equiv_cpu == new_patch->equiv_cpu) {
+			if (p->patch_id >= new_patch->patch_id)
+				/* we already have the latest patch */
+				return;
+
+			list_replace(&p->plist, &new_patch->plist);
+			kfree(p->data);
+			kfree(p);
+			return;
+		}
+	}
+	/* no patch found, add it */
+	list_add_tail(&new_patch->plist, &pcache);
+}
+
+static void free_cache(void)
+{
+	struct ucode_patch *p, *tmp;
+
+	list_for_each_entry_safe(p, tmp, &pcache, plist) {
+		__list_del(p->plist.prev, p->plist.next);
+		kfree(p->data);
+		kfree(p);
+	}
+}
+
+static struct ucode_patch *find_patch(unsigned int cpu)
+{
+	u16 equiv_id;
+
+	equiv_id = find_equiv_id(cpu);
+	if (!equiv_id)
+		return NULL;
+
+	return cache_find_patch(equiv_id);
+}
 
 static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
+	csig->sig = cpuid_eax(0x00000001);
 	csig->rev = c->microcode;
 	pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
 
 	return 0;
 }
 
-static unsigned int verify_ucode_size(int cpu, u32 patch_size,
+static unsigned int verify_patch_size(int cpu, u32 patch_size,
 				      unsigned int size)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
@@ -118,94 +211,37 @@ static unsigned int verify_ucode_size(int cpu, u32 patch_size,
 	return patch_size;
 }
 
-static u16 find_equiv_id(void)
+static int apply_microcode_amd(int cpu)
 {
-	unsigned int current_cpu_id, i = 0;
-
-	BUG_ON(equiv_cpu_table == NULL);
-
-	current_cpu_id = cpuid_eax(0x00000001);
-
-	while (equiv_cpu_table[i].installed_cpu != 0) {
-		if (current_cpu_id == equiv_cpu_table[i].installed_cpu)
-			return equiv_cpu_table[i].equiv_cpu;
-
-		i++;
-	}
-	return 0;
-}
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	struct microcode_amd *mc_amd;
+	struct ucode_cpu_info *uci;
+	struct ucode_patch *p;
+	u32 rev, dummy;
 
-/*
- * we signal a good patch is found by returning its size > 0
- */
-static int get_matching_microcode(int cpu, const u8 *ucode_ptr,
-				  unsigned int leftover_size, int rev,
-				  unsigned int *current_size)
-{
-	struct microcode_header_amd *mc_hdr;
-	unsigned int actual_size;
-	u16 equiv_cpu_id;
+	BUG_ON(raw_smp_processor_id() != cpu);
 
-	/* size of the current patch we're staring at */
-	*current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE;
+	uci = ucode_cpu_info + cpu;
 
-	equiv_cpu_id = find_equiv_id();
-	if (!equiv_cpu_id)
+	p = find_patch(cpu);
+	if (!p)
 		return 0;
 
-	/*
-	 * let's look at the patch header itself now
-	 */
-	mc_hdr = (struct microcode_header_amd *)(ucode_ptr + SECTION_HDR_SIZE);
+	mc_amd  = p->data;
+	uci->mc = p->data;
 
-	if (mc_hdr->processor_rev_id != equiv_cpu_id)
-		return 0;
+	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
 
-	/* ucode might be chipset specific -- currently we don't support this */
-	if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) {
-		pr_err("CPU%d: chipset specific code not yet supported\n",
-		       cpu);
+	/* need to apply patch? */
+	if (rev >= mc_amd->hdr.patch_id) {
+		c->microcode = rev;
 		return 0;
 	}
 
-	if (mc_hdr->patch_id <= rev)
-		return 0;
-
-	/*
-	 * now that the header looks sane, verify its size
-	 */
-	actual_size = verify_ucode_size(cpu, *current_size, leftover_size);
-	if (!actual_size)
-		return 0;
-
-	/* clear the patch buffer */
-	memset(patch, 0, PAGE_SIZE);
-
-	/* all looks ok, get the binary patch */
-	get_ucode_data(patch, ucode_ptr + SECTION_HDR_SIZE, actual_size);
-
-	return actual_size;
-}
-
-static int apply_microcode_amd(int cpu)
-{
-	u32 rev, dummy;
-	int cpu_num = raw_smp_processor_id();
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-	struct microcode_amd *mc_amd = uci->mc;
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu_num != cpu);
-
-	if (mc_amd == NULL)
-		return 0;
-
 	wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc_amd->hdr.data_code);
-	/* get patch id after patching */
-	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
 
-	/* check current patch id and patch's id for match */
+	/* verify patch application was successful */
+	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
 	if (rev != mc_amd->hdr.patch_id) {
 		pr_err("CPU%d: update failed for patch_level=0x%08x\n",
 		       cpu, mc_amd->hdr.patch_id);
@@ -237,7 +273,7 @@ static int install_equiv_cpu_table(const u8 *buf)
 		return -ENOMEM;
 	}
 
-	get_ucode_data(equiv_cpu_table, buf + CONTAINER_HDR_SZ, size);
+	memcpy(equiv_cpu_table, buf + CONTAINER_HDR_SZ, size);
 
 	/* add header length */
 	return size + CONTAINER_HDR_SZ;
@@ -249,61 +285,113 @@ static void free_equiv_cpu_table(void)
 	equiv_cpu_table = NULL;
 }
 
-static enum ucode_state
-generic_load_microcode(int cpu, const u8 *data, size_t size)
+static void cleanup(void)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	struct microcode_header_amd *mc_hdr = NULL;
-	unsigned int mc_size, leftover, current_size = 0;
+	free_equiv_cpu_table();
+	free_cache();
+}
+
+/*
+ * We return the current size even if some of the checks failed so that
+ * we can skip over the next patch. If we return a negative value, we
+ * signal a grave error like a memory allocation has failed and the
+ * driver cannot continue functioning normally. In such cases, we tear
+ * down everything we've used up so far and exit.
+ */
+static int verify_and_add_patch(unsigned int cpu, u8 *fw, unsigned int leftover)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	struct microcode_header_amd *mc_hdr;
+	struct ucode_patch *patch;
+	unsigned int patch_size, crnt_size, ret;
+	u32 proc_fam;
+	u16 proc_id;
+
+	patch_size  = *(u32 *)(fw + 4);
+	crnt_size   = patch_size + SECTION_HDR_SIZE;
+	mc_hdr	    = (struct microcode_header_amd *)(fw + SECTION_HDR_SIZE);
+	proc_id	    = mc_hdr->processor_rev_id;
+
+	proc_fam = find_cpu_family_by_equiv_cpu(proc_id);
+	if (!proc_fam) {
+		pr_err("No patch family for equiv ID: 0x%04x\n", proc_id);
+		return crnt_size;
+	}
+
+	/* check if patch is for the current family */
+	proc_fam = ((proc_fam >> 8) & 0xf) + ((proc_fam >> 20) & 0xff);
+	if (proc_fam != c->x86)
+		return crnt_size;
+
+	if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) {
+		pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n",
+			mc_hdr->patch_id);
+		return crnt_size;
+	}
+
+	ret = verify_patch_size(cpu, patch_size, leftover);
+	if (!ret) {
+		pr_err("Patch-ID 0x%08x: size mismatch.\n", mc_hdr->patch_id);
+		return crnt_size;
+	}
+
+	patch = kzalloc(sizeof(*patch), GFP_KERNEL);
+	if (!patch) {
+		pr_err("Patch allocation failure.\n");
+		return -EINVAL;
+	}
+
+	patch->data = kzalloc(patch_size, GFP_KERNEL);
+	if (!patch->data) {
+		pr_err("Patch data allocation failure.\n");
+		kfree(patch);
+		return -EINVAL;
+	}
+
+	/* All looks ok, copy patch... */
+	memcpy(patch->data, fw + SECTION_HDR_SIZE, patch_size);
+	INIT_LIST_HEAD(&patch->plist);
+	patch->patch_id  = mc_hdr->patch_id;
+	patch->equiv_cpu = proc_id;
+
+	/* ... and add to cache. */
+	update_cache(patch);
+
+	return crnt_size;
+}
+
+static enum ucode_state load_microcode_amd(int cpu, const u8 *data, size_t size)
+{
+	enum ucode_state ret = UCODE_ERROR;
+	unsigned int leftover;
+	u8 *fw = (u8 *)data;
+	int crnt_size = 0;
 	int offset;
-	const u8 *ucode_ptr = data;
-	void *new_mc = NULL;
-	unsigned int new_rev = uci->cpu_sig.rev;
-	enum ucode_state state = UCODE_ERROR;
 
-	offset = install_equiv_cpu_table(ucode_ptr);
+	offset = install_equiv_cpu_table(data);
 	if (offset < 0) {
 		pr_err("failed to create equivalent cpu table\n");
-		goto out;
+		return ret;
 	}
-	ucode_ptr += offset;
+	fw += offset;
 	leftover = size - offset;
 
-	if (*(u32 *)ucode_ptr != UCODE_UCODE_TYPE) {
+	if (*(u32 *)fw != UCODE_UCODE_TYPE) {
 		pr_err("invalid type field in container file section header\n");
-		goto free_table;
+		free_equiv_cpu_table();
+		return ret;
 	}
 
 	while (leftover) {
-		mc_size = get_matching_microcode(cpu, ucode_ptr, leftover,
-						 new_rev, &current_size);
-		if (mc_size) {
-			mc_hdr  = patch;
-			new_mc  = patch;
-			new_rev = mc_hdr->patch_id;
-			goto out_ok;
-		}
-
-		ucode_ptr += current_size;
-		leftover  -= current_size;
-	}
+		crnt_size = verify_and_add_patch(cpu, fw, leftover);
+		if (crnt_size < 0)
+			return ret;
 
-	if (!new_mc) {
-		state = UCODE_NFOUND;
-		goto free_table;
+		fw	 += crnt_size;
+		leftover -= crnt_size;
 	}
 
-out_ok:
-	uci->mc = new_mc;
-	state = UCODE_OK;
-	pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n",
-		 cpu, uci->cpu_sig.rev, new_rev);
-
-free_table:
-	free_equiv_cpu_table();
-
-out:
-	return state;
+	return UCODE_OK;
 }
 
 /*
@@ -314,7 +402,7 @@ out:
  *
  * This legacy file is always smaller than 2K in size.
  *
- * Starting at family 15h they are in family specific firmware files:
+ * Beginning with family 15h, they are in family-specific firmware files:
  *
  *    amd-ucode/microcode_amd_fam15h.bin
  *    amd-ucode/microcode_amd_fam16h.bin
@@ -322,12 +410,17 @@ out:
  *
  * These might be larger than 2K.
  */
-static enum ucode_state request_microcode_amd(int cpu, struct device *device)
+static enum ucode_state request_microcode_amd(int cpu, struct device *device,
+					      bool refresh_fw)
 {
 	char fw_name[36] = "amd-ucode/microcode_amd.bin";
-	const struct firmware *fw;
-	enum ucode_state ret = UCODE_NFOUND;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	enum ucode_state ret = UCODE_NFOUND;
+	const struct firmware *fw;
+
+	/* reload ucode container only on the boot cpu */
+	if (!refresh_fw || c->cpu_index != boot_cpu_data.cpu_index)
+		return UCODE_OK;
 
 	if (c->x86 >= 0x15)
 		snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86);
@@ -343,12 +436,17 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device)
 		goto fw_release;
 	}
 
-	ret = generic_load_microcode(cpu, fw->data, fw->size);
+	/* free old equiv table */
+	free_equiv_cpu_table();
+
+	ret = load_microcode_amd(cpu, fw->data, fw->size);
+	if (ret != UCODE_OK)
+		cleanup();
 
-fw_release:
+ fw_release:
 	release_firmware(fw);
 
-out:
+ out:
 	return ret;
 }
 
@@ -382,14 +480,10 @@ struct microcode_ops * __init init_amd_microcode(void)
 		return NULL;
 	}
 
-	patch = (void *)get_zeroed_page(GFP_KERNEL);
-	if (!patch)
-		return NULL;
-
 	return &microcode_amd_ops;
 }
 
 void __exit exit_amd_microcode(void)
 {
-	free_page((unsigned long)patch);
+	cleanup();
 }
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 4873e62db6a1..3a04b224d0c0 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -225,6 +225,9 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 	if (do_microcode_update(buf, len) == 0)
 		ret = (ssize_t)len;
 
+	if (ret > 0)
+		perf_check_microcode();
+
 	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
 
@@ -276,19 +279,18 @@ static struct platform_device	*microcode_pdev;
 static int reload_for_cpu(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	enum ucode_state ustate;
 	int err = 0;
 
-	if (uci->valid) {
-		enum ucode_state ustate;
-
-		ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
-		if (ustate == UCODE_OK)
-			apply_microcode_on_target(cpu);
-		else
-			if (ustate == UCODE_ERROR)
-				err = -EINVAL;
-	}
+	if (!uci->valid)
+		return err;
 
+	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev, true);
+	if (ustate == UCODE_OK)
+		apply_microcode_on_target(cpu);
+	else
+		if (ustate == UCODE_ERROR)
+			err = -EINVAL;
 	return err;
 }
 
@@ -370,18 +372,15 @@ static void microcode_fini_cpu(int cpu)
 
 static enum ucode_state microcode_resume_cpu(int cpu)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	if (!uci->mc)
-		return UCODE_NFOUND;
-
 	pr_debug("CPU%d updated upon resume\n", cpu);
-	apply_microcode_on_target(cpu);
+
+	if (apply_microcode_on_target(cpu))
+		return UCODE_ERROR;
 
 	return UCODE_OK;
 }
 
-static enum ucode_state microcode_init_cpu(int cpu)
+static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw)
 {
 	enum ucode_state ustate;
 
@@ -392,7 +391,8 @@ static enum ucode_state microcode_init_cpu(int cpu)
 	if (system_state != SYSTEM_RUNNING)
 		return UCODE_NFOUND;
 
-	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
+	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev,
+						     refresh_fw);
 
 	if (ustate == UCODE_OK) {
 		pr_debug("CPU%d updated upon init\n", cpu);
@@ -405,14 +405,11 @@ static enum ucode_state microcode_init_cpu(int cpu)
 static enum ucode_state microcode_update_cpu(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	enum ucode_state ustate;
 
 	if (uci->valid)
-		ustate = microcode_resume_cpu(cpu);
-	else
-		ustate = microcode_init_cpu(cpu);
+		return microcode_resume_cpu(cpu);
 
-	return ustate;
+	return microcode_init_cpu(cpu, false);
 }
 
 static int mc_device_add(struct device *dev, struct subsys_interface *sif)
@@ -428,7 +425,7 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif)
 	if (err)
 		return err;
 
-	if (microcode_init_cpu(cpu) == UCODE_ERROR)
+	if (microcode_init_cpu(cpu, true) == UCODE_ERROR)
 		return -EINVAL;
 
 	return err;
@@ -477,34 +474,41 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 	struct device *dev;
 
 	dev = get_cpu_device(cpu);
-	switch (action) {
+
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
 		microcode_update_cpu(cpu);
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
 		pr_debug("CPU%d added\n", cpu);
+		/*
+		 * "break" is missing on purpose here because we want to fall
+		 * through in order to create the sysfs group.
+		 */
+
+	case CPU_DOWN_FAILED:
 		if (sysfs_create_group(&dev->kobj, &mc_attr_group))
 			pr_err("Failed to create group for CPU%d\n", cpu);
 		break;
+
 	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
 		/* Suspend is in progress, only remove the interface */
 		sysfs_remove_group(&dev->kobj, &mc_attr_group);
 		pr_debug("CPU%d removed\n", cpu);
 		break;
 
 	/*
+	 * case CPU_DEAD:
+	 *
 	 * When a CPU goes offline, don't free up or invalidate the copy of
 	 * the microcode in kernel memory, so that we can reuse it when the
 	 * CPU comes back online without unnecessarily requesting the userspace
 	 * for it again.
 	 */
-	case CPU_UP_CANCELED_FROZEN:
-		/* The CPU refused to come up during a system resume */
-		microcode_fini_cpu(cpu);
-		break;
 	}
+
+	/* The CPU refused to come up during a system resume */
+	if (action == CPU_UP_CANCELED_FROZEN)
+		microcode_fini_cpu(cpu);
+
 	return NOTIFY_OK;
 }
 
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 0327e2b3c408..3544aed39338 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -405,7 +405,8 @@ static int get_ucode_fw(void *to, const void *from, size_t n)
 	return 0;
 }
 
-static enum ucode_state request_microcode_fw(int cpu, struct device *device)
+static enum ucode_state request_microcode_fw(int cpu, struct device *device,
+					     bool refresh_fw)
 {
 	char name[30];
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index eb113693f043..a7c5661f8496 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -257,12 +257,14 @@ static int __init msr_init(void)
 		goto out_chrdev;
 	}
 	msr_class->devnode = msr_devnode;
+	get_online_cpus();
 	for_each_online_cpu(i) {
 		err = msr_device_create(i);
 		if (err != 0)
 			goto out_class;
 	}
 	register_hotcpu_notifier(&msr_class_cpu_notifier);
+	put_online_cpus();
 
 	err = 0;
 	goto out;
@@ -271,6 +273,7 @@ out_class:
 	i = 0;
 	for_each_online_cpu(i)
 		msr_device_destroy(i);
+	put_online_cpus();
 	class_destroy(msr_class);
 out_chrdev:
 	__unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr");
@@ -281,11 +284,13 @@ out:
 static void __exit msr_exit(void)
 {
 	int cpu = 0;
+	get_online_cpus();
 	for_each_online_cpu(cpu)
 		msr_device_destroy(cpu);
 	class_destroy(msr_class);
 	__unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr");
 	unregister_hotcpu_notifier(&msr_class_cpu_notifier);
+	put_online_cpus();
 }
 
 module_init(msr_init);
diff --git a/arch/x86/kernel/perf_regs.c b/arch/x86/kernel/perf_regs.c
new file mode 100644
index 000000000000..e309cc5c276e
--- /dev/null
+++ b/arch/x86/kernel/perf_regs.c
@@ -0,0 +1,105 @@
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/bug.h>
+#include <linux/stddef.h>
+#include <asm/perf_regs.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_X86_32
+#define PERF_REG_X86_MAX PERF_REG_X86_32_MAX
+#else
+#define PERF_REG_X86_MAX PERF_REG_X86_64_MAX
+#endif
+
+#define PT_REGS_OFFSET(id, r) [id] = offsetof(struct pt_regs, r)
+
+static unsigned int pt_regs_offset[PERF_REG_X86_MAX] = {
+	PT_REGS_OFFSET(PERF_REG_X86_AX, ax),
+	PT_REGS_OFFSET(PERF_REG_X86_BX, bx),
+	PT_REGS_OFFSET(PERF_REG_X86_CX, cx),
+	PT_REGS_OFFSET(PERF_REG_X86_DX, dx),
+	PT_REGS_OFFSET(PERF_REG_X86_SI, si),
+	PT_REGS_OFFSET(PERF_REG_X86_DI, di),
+	PT_REGS_OFFSET(PERF_REG_X86_BP, bp),
+	PT_REGS_OFFSET(PERF_REG_X86_SP, sp),
+	PT_REGS_OFFSET(PERF_REG_X86_IP, ip),
+	PT_REGS_OFFSET(PERF_REG_X86_FLAGS, flags),
+	PT_REGS_OFFSET(PERF_REG_X86_CS, cs),
+	PT_REGS_OFFSET(PERF_REG_X86_SS, ss),
+#ifdef CONFIG_X86_32
+	PT_REGS_OFFSET(PERF_REG_X86_DS, ds),
+	PT_REGS_OFFSET(PERF_REG_X86_ES, es),
+	PT_REGS_OFFSET(PERF_REG_X86_FS, fs),
+	PT_REGS_OFFSET(PERF_REG_X86_GS, gs),
+#else
+	/*
+	 * The pt_regs struct does not store
+	 * ds, es, fs, gs in 64 bit mode.
+	 */
+	(unsigned int) -1,
+	(unsigned int) -1,
+	(unsigned int) -1,
+	(unsigned int) -1,
+#endif
+#ifdef CONFIG_X86_64
+	PT_REGS_OFFSET(PERF_REG_X86_R8, r8),
+	PT_REGS_OFFSET(PERF_REG_X86_R9, r9),
+	PT_REGS_OFFSET(PERF_REG_X86_R10, r10),
+	PT_REGS_OFFSET(PERF_REG_X86_R11, r11),
+	PT_REGS_OFFSET(PERF_REG_X86_R12, r12),
+	PT_REGS_OFFSET(PERF_REG_X86_R13, r13),
+	PT_REGS_OFFSET(PERF_REG_X86_R14, r14),
+	PT_REGS_OFFSET(PERF_REG_X86_R15, r15),
+#endif
+};
+
+u64 perf_reg_value(struct pt_regs *regs, int idx)
+{
+	if (WARN_ON_ONCE(idx >= ARRAY_SIZE(pt_regs_offset)))
+		return 0;
+
+	return regs_get_register(regs, pt_regs_offset[idx]);
+}
+
+#define REG_RESERVED (~((1ULL << PERF_REG_X86_MAX) - 1ULL))
+
+#ifdef CONFIG_X86_32
+int perf_reg_validate(u64 mask)
+{
+	if (!mask || mask & REG_RESERVED)
+		return -EINVAL;
+
+	return 0;
+}
+
+u64 perf_reg_abi(struct task_struct *task)
+{
+	return PERF_SAMPLE_REGS_ABI_32;
+}
+#else /* CONFIG_X86_64 */
+#define REG_NOSUPPORT ((1ULL << PERF_REG_X86_DS) | \
+		       (1ULL << PERF_REG_X86_ES) | \
+		       (1ULL << PERF_REG_X86_FS) | \
+		       (1ULL << PERF_REG_X86_GS))
+
+int perf_reg_validate(u64 mask)
+{
+	if (!mask || mask & REG_RESERVED)
+		return -EINVAL;
+
+	if (mask & REG_NOSUPPORT)
+		return -EINVAL;
+
+	return 0;
+}
+
+u64 perf_reg_abi(struct task_struct *task)
+{
+	if (test_tsk_thread_flag(task, TIF_IA32))
+		return PERF_SAMPLE_REGS_ABI_32;
+	else
+		return PERF_SAMPLE_REGS_ABI_64;
+}
+#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/kernel/probe_roms.c b/arch/x86/kernel/probe_roms.c
index 0bc72e2069e3..d5f15c3f7b25 100644
--- a/arch/x86/kernel/probe_roms.c
+++ b/arch/x86/kernel/probe_roms.c
@@ -150,7 +150,7 @@ static struct resource *find_oprom(struct pci_dev *pdev)
 	return oprom;
 }
 
-void *pci_map_biosrom(struct pci_dev *pdev)
+void __iomem *pci_map_biosrom(struct pci_dev *pdev)
 {
 	struct resource *oprom = find_oprom(pdev);
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ef6a8456f719..dc3567e083f9 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -66,15 +66,13 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	int ret;
 
-	unlazy_fpu(src);
-
 	*dst = *src;
 	if (fpu_allocated(&src->thread.fpu)) {
 		memset(&dst->thread.fpu, 0, sizeof(dst->thread.fpu));
 		ret = fpu_alloc(&dst->thread.fpu);
 		if (ret)
 			return ret;
-		fpu_copy(&dst->thread.fpu, &src->thread.fpu);
+		fpu_copy(dst, src);
 	}
 	return 0;
 }
@@ -97,16 +95,6 @@ void arch_task_cache_init(void)
 				  SLAB_PANIC | SLAB_NOTRACK, NULL);
 }
 
-static inline void drop_fpu(struct task_struct *tsk)
-{
-	/*
-	 * Forget coprocessor state..
-	 */
-	tsk->fpu_counter = 0;
-	clear_fpu(tsk);
-	clear_used_math();
-}
-
 /*
  * Free current thread data structures etc..
  */
@@ -163,7 +151,13 @@ void flush_thread(void)
 
 	flush_ptrace_hw_breakpoint(tsk);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
-	drop_fpu(tsk);
+	drop_init_fpu(tsk);
+	/*
+	 * Free the FPU state for non xsave platforms. They get reallocated
+	 * lazily at the first use.
+	 */
+	if (!use_eager_fpu())
+		free_thread_xstate(tsk);
 }
 
 static void hard_disable_TSC(void)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 516fa186121b..b9ff83c7135b 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -190,10 +190,6 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 	regs->cs		= __USER_CS;
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
-	/*
-	 * Free the old FP and other extended state
-	 */
-	free_thread_xstate(current);
 }
 EXPORT_SYMBOL_GPL(start_thread);
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 0a980c9d7cb8..8a6d20ce1978 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -232,10 +232,6 @@ start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 	regs->cs		= _cs;
 	regs->ss		= _ss;
 	regs->flags		= X86_EFLAGS_IF;
-	/*
-	 * Free the old FP and other extended state
-	 */
-	free_thread_xstate(current);
 }
 
 void
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index c4c6a5c2bf0f..b00b33a18390 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
+#include <linux/rcupdate.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -1332,9 +1333,6 @@ static const struct user_regset_view user_x86_64_view = {
 #define genregs32_get		genregs_get
 #define genregs32_set		genregs_set
 
-#define user_i387_ia32_struct	user_i387_struct
-#define user32_fxsr_struct	user_fxsr_struct
-
 #endif	/* CONFIG_X86_64 */
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1463,6 +1461,8 @@ long syscall_trace_enter(struct pt_regs *regs)
 {
 	long ret = 0;
 
+	rcu_user_exit();
+
 	/*
 	 * If we stepped into a sysenter/syscall insn, it trapped in
 	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
@@ -1526,4 +1526,6 @@ void syscall_trace_leave(struct pt_regs *regs)
 			!test_thread_flag(TIF_SYSCALL_EMU);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, step);
+
+	rcu_user_enter();
 }
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index af6db6ec5b2a..4929c1be0ac0 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -225,7 +225,7 @@ static struct platform_device rtc_device = {
 static __init int add_rtc_cmos(void)
 {
 #ifdef CONFIG_PNP
-	static const char *ids[] __initconst =
+	static const char * const  const ids[] __initconst =
 	    { "PNP0b00", "PNP0b01", "PNP0b02", };
 	struct pnp_dev *dev;
 	struct pnp_id *id;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f4b9b80e1b95..d609be046b57 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -957,13 +957,11 @@ void __init setup_arch(char **cmdline_p)
 	initmem_init();
 	memblock_find_dma_reserve();
 
-#ifdef CONFIG_KVM_CLOCK
+#ifdef CONFIG_KVM_GUEST
 	kvmclock_init();
 #endif
 
-	x86_init.paging.pagetable_setup_start(swapper_pg_dir);
-	paging_init();
-	x86_init.paging.pagetable_setup_done(swapper_pg_dir);
+	x86_init.paging.pagetable_init();
 
 	if (boot_cpu_data.cpuid_level >= 0) {
 		/* A CPU has %cr4 if and only if it has CPUID */
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index b280908a376e..b33144c8b309 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -114,11 +114,12 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 		regs->orig_ax = -1;		/* disable syscall checks */
 
 		get_user_ex(buf, &sc->fpstate);
-		err |= restore_i387_xstate(buf);
 
 		get_user_ex(*pax, &sc->ax);
 	} get_user_catch(err);
 
+	err |= restore_xstate_sig(buf, config_enabled(CONFIG_X86_32));
+
 	return err;
 }
 
@@ -206,35 +207,32 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	     void __user **fpstate)
 {
 	/* Default to using normal stack */
+	unsigned long math_size = 0;
 	unsigned long sp = regs->sp;
+	unsigned long buf_fx = 0;
 	int onsigstack = on_sig_stack(sp);
 
-#ifdef CONFIG_X86_64
 	/* redzone */
-	sp -= 128;
-#endif /* CONFIG_X86_64 */
+	if (config_enabled(CONFIG_X86_64))
+		sp -= 128;
 
 	if (!onsigstack) {
 		/* This is the X/Open sanctioned signal stack switching.  */
 		if (ka->sa.sa_flags & SA_ONSTACK) {
 			if (current->sas_ss_size)
 				sp = current->sas_ss_sp + current->sas_ss_size;
-		} else {
-#ifdef CONFIG_X86_32
-			/* This is the legacy signal stack switching. */
-			if ((regs->ss & 0xffff) != __USER_DS &&
-				!(ka->sa.sa_flags & SA_RESTORER) &&
-					ka->sa.sa_restorer)
+		} else if (config_enabled(CONFIG_X86_32) &&
+			   (regs->ss & 0xffff) != __USER_DS &&
+			   !(ka->sa.sa_flags & SA_RESTORER) &&
+			   ka->sa.sa_restorer) {
+				/* This is the legacy signal stack switching. */
 				sp = (unsigned long) ka->sa.sa_restorer;
-#endif /* CONFIG_X86_32 */
 		}
 	}
 
 	if (used_math()) {
-		sp -= sig_xstate_size;
-#ifdef CONFIG_X86_64
-		sp = round_down(sp, 64);
-#endif /* CONFIG_X86_64 */
+		sp = alloc_mathframe(sp, config_enabled(CONFIG_X86_32),
+				     &buf_fx, &math_size);
 		*fpstate = (void __user *)sp;
 	}
 
@@ -247,8 +245,9 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	if (onsigstack && !likely(on_sig_stack(sp)))
 		return (void __user *)-1L;
 
-	/* save i387 state */
-	if (used_math() && save_i387_xstate(*fpstate) < 0)
+	/* save i387 and extended state */
+	if (used_math() &&
+	    save_xstate_sig(*fpstate, (void __user *)buf_fx, math_size) < 0)
 		return (void __user *)-1L;
 
 	return (void __user *)sp;
@@ -357,7 +356,6 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		put_user_ex(sig, &frame->sig);
 		put_user_ex(&frame->info, &frame->pinfo);
 		put_user_ex(&frame->uc, &frame->puc);
-		err |= copy_siginfo_to_user(&frame->info, info);
 
 		/* Create the ucontext.  */
 		if (cpu_has_xsave)
@@ -369,9 +367,6 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		put_user_ex(sas_ss_flags(regs->sp),
 			    &frame->uc.uc_stack.ss_flags);
 		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-		err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-					regs, set->sig[0]);
-		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 
 		/* Set up to return from userspace.  */
 		restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
@@ -388,6 +383,11 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		 */
 		put_user_ex(*((u64 *)&rt_retcode), (u64 *)frame->retcode);
 	} put_user_catch(err);
+	
+	err |= copy_siginfo_to_user(&frame->info, info);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+				regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 
 	if (err)
 		return -EFAULT;
@@ -436,8 +436,6 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		put_user_ex(sas_ss_flags(regs->sp),
 			    &frame->uc.uc_stack.ss_flags);
 		put_user_ex(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
-		err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
-		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 
 		/* Set up to return from userspace.  If provided, use a stub
 		   already in userspace.  */
@@ -450,6 +448,9 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		}
 	} put_user_catch(err);
 
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
 	if (err)
 		return -EFAULT;
 
@@ -474,6 +475,75 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 }
 #endif /* CONFIG_X86_32 */
 
+static int x32_setup_rt_frame(int sig, struct k_sigaction *ka,
+			      siginfo_t *info, compat_sigset_t *set,
+			      struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_X32_ABI
+	struct rt_sigframe_x32 __user *frame;
+	void __user *restorer;
+	int err = 0;
+	void __user *fpstate = NULL;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		if (copy_siginfo_to_user32(&frame->info, info))
+			return -EFAULT;
+	}
+
+	put_user_try {
+		/* Create the ucontext.  */
+		if (cpu_has_xsave)
+			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
+		else
+			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(0, &frame->uc.uc_link);
+		put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+		put_user_ex(sas_ss_flags(regs->sp),
+			    &frame->uc.uc_stack.ss_flags);
+		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+		put_user_ex(0, &frame->uc.uc__pad0);
+
+		if (ka->sa.sa_flags & SA_RESTORER) {
+			restorer = ka->sa.sa_restorer;
+		} else {
+			/* could use a vstub here */
+			restorer = NULL;
+			err |= -EFAULT;
+		}
+		put_user_ex(restorer, &frame->pretcode);
+	} put_user_catch(err);
+
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+				regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	regs->sp = (unsigned long) frame;
+	regs->ip = (unsigned long) ka->sa.sa_handler;
+
+	/* We use the x32 calling convention here... */
+	regs->di = sig;
+	regs->si = (unsigned long) &frame->info;
+	regs->dx = (unsigned long) &frame->uc;
+
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
+
+	regs->cs = __USER_CS;
+	regs->ss = __USER_DS;
+#endif	/* CONFIG_X86_X32_ABI */
+
+	return 0;
+}
+
 #ifdef CONFIG_X86_32
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -612,55 +682,22 @@ static int signr_convert(int sig)
 	return sig;
 }
 
-#ifdef CONFIG_X86_32
-
-#define is_ia32	1
-#define ia32_setup_frame	__setup_frame
-#define ia32_setup_rt_frame	__setup_rt_frame
-
-#else /* !CONFIG_X86_32 */
-
-#ifdef CONFIG_IA32_EMULATION
-#define is_ia32	test_thread_flag(TIF_IA32)
-#else /* !CONFIG_IA32_EMULATION */
-#define is_ia32	0
-#endif /* CONFIG_IA32_EMULATION */
-
-#ifdef CONFIG_X86_X32_ABI
-#define is_x32	test_thread_flag(TIF_X32)
-
-static int x32_setup_rt_frame(int sig, struct k_sigaction *ka,
-			      siginfo_t *info, compat_sigset_t *set,
-			      struct pt_regs *regs);
-#else /* !CONFIG_X86_X32_ABI */
-#define is_x32	0
-#endif /* CONFIG_X86_X32_ABI */
-
-int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-		sigset_t *set, struct pt_regs *regs);
-int ia32_setup_frame(int sig, struct k_sigaction *ka,
-		sigset_t *set, struct pt_regs *regs);
-
-#endif /* CONFIG_X86_32 */
-
 static int
 setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		struct pt_regs *regs)
 {
 	int usig = signr_convert(sig);
 	sigset_t *set = sigmask_to_save();
+	compat_sigset_t *cset = (compat_sigset_t *) set;
 
 	/* Set up the stack frame */
-	if (is_ia32) {
+	if (is_ia32_frame()) {
 		if (ka->sa.sa_flags & SA_SIGINFO)
-			return ia32_setup_rt_frame(usig, ka, info, set, regs);
+			return ia32_setup_rt_frame(usig, ka, info, cset, regs);
 		else
-			return ia32_setup_frame(usig, ka, set, regs);
-#ifdef CONFIG_X86_X32_ABI
-	} else if (is_x32) {
-		return x32_setup_rt_frame(usig, ka, info,
-					 (compat_sigset_t *)set, regs);
-#endif
+			return ia32_setup_frame(usig, ka, cset, regs);
+	} else if (is_x32_frame()) {
+		return x32_setup_rt_frame(usig, ka, info, cset, regs);
 	} else {
 		return __setup_rt_frame(sig, ka, info, set, regs);
 	}
@@ -779,6 +816,8 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
+	rcu_user_exit();
+
 #ifdef CONFIG_X86_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
@@ -804,6 +843,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 #ifdef CONFIG_X86_32
 	clear_thread_flag(TIF_IRET);
 #endif /* CONFIG_X86_32 */
+
+	rcu_user_enter();
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
@@ -824,72 +865,6 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
 }
 
 #ifdef CONFIG_X86_X32_ABI
-static int x32_setup_rt_frame(int sig, struct k_sigaction *ka,
-			      siginfo_t *info, compat_sigset_t *set,
-			      struct pt_regs *regs)
-{
-	struct rt_sigframe_x32 __user *frame;
-	void __user *restorer;
-	int err = 0;
-	void __user *fpstate = NULL;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		return -EFAULT;
-
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-		if (copy_siginfo_to_user32(&frame->info, info))
-			return -EFAULT;
-	}
-
-	put_user_try {
-		/* Create the ucontext.  */
-		if (cpu_has_xsave)
-			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
-		else
-			put_user_ex(0, &frame->uc.uc_flags);
-		put_user_ex(0, &frame->uc.uc_link);
-		put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-		put_user_ex(sas_ss_flags(regs->sp),
-			    &frame->uc.uc_stack.ss_flags);
-		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-		put_user_ex(0, &frame->uc.uc__pad0);
-		err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-					regs, set->sig[0]);
-		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-		if (ka->sa.sa_flags & SA_RESTORER) {
-			restorer = ka->sa.sa_restorer;
-		} else {
-			/* could use a vstub here */
-			restorer = NULL;
-			err |= -EFAULT;
-		}
-		put_user_ex(restorer, &frame->pretcode);
-	} put_user_catch(err);
-
-	if (err)
-		return -EFAULT;
-
-	/* Set up registers for signal handler */
-	regs->sp = (unsigned long) frame;
-	regs->ip = (unsigned long) ka->sa.sa_handler;
-
-	/* We use the x32 calling convention here... */
-	regs->di = sig;
-	regs->si = (unsigned long) &frame->info;
-	regs->dx = (unsigned long) &frame->uc;
-
-	loadsegment(ds, __USER_DS);
-	loadsegment(es, __USER_DS);
-
-	regs->cs = __USER_CS;
-	regs->ss = __USER_DS;
-
-	return 0;
-}
-
 asmlinkage long sys32_x32_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe_x32 __user *frame;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7c5a8c314c02..c80a33bc528b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -665,7 +665,8 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
 	unsigned long boot_error = 0;
 	int timeout;
 
-	alternatives_smp_switch(1);
+	/* Just in case we booted with a single CPU. */
+	alternatives_enable_smp();
 
 	idle->thread.sp = (unsigned long) (((struct pt_regs *)
 			  (THREAD_SIZE +  task_stack_page(idle))) - 1);
@@ -1053,20 +1054,6 @@ out:
 	preempt_enable();
 }
 
-void arch_disable_nonboot_cpus_begin(void)
-{
-	/*
-	 * Avoid the smp alternatives switch during the disable_nonboot_cpus().
-	 * In the suspend path, we will be back in the SMP mode shortly anyways.
-	 */
-	skip_smp_alternatives = true;
-}
-
-void arch_disable_nonboot_cpus_end(void)
-{
-	skip_smp_alternatives = false;
-}
-
 void arch_enable_nonboot_cpus_begin(void)
 {
 	set_mtrr_aps_delayed_init();
@@ -1256,9 +1243,6 @@ void native_cpu_die(unsigned int cpu)
 		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
 			if (system_state == SYSTEM_RUNNING)
 				pr_info("CPU %u is now offline\n", cpu);
-
-			if (1 == num_online_cpus())
-				alternatives_smp_switch(0);
 			return;
 		}
 		msleep(100);
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index c346d1161488..cd3b2438a980 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -157,6 +157,33 @@ static int enable_single_step(struct task_struct *child)
 	return 1;
 }
 
+void set_task_blockstep(struct task_struct *task, bool on)
+{
+	unsigned long debugctl;
+
+	/*
+	 * Ensure irq/preemption can't change debugctl in between.
+	 * Note also that both TIF_BLOCKSTEP and debugctl should
+	 * be changed atomically wrt preemption.
+	 * FIXME: this means that set/clear TIF_BLOCKSTEP is simply
+	 * wrong if task != current, SIGKILL can wakeup the stopped
+	 * tracee and set/clear can play with the running task, this
+	 * can confuse the next __switch_to_xtra().
+	 */
+	local_irq_disable();
+	debugctl = get_debugctlmsr();
+	if (on) {
+		debugctl |= DEBUGCTLMSR_BTF;
+		set_tsk_thread_flag(task, TIF_BLOCKSTEP);
+	} else {
+		debugctl &= ~DEBUGCTLMSR_BTF;
+		clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
+	}
+	if (task == current)
+		update_debugctlmsr(debugctl);
+	local_irq_enable();
+}
+
 /*
  * Enable single or block step.
  */
@@ -169,19 +196,10 @@ static void enable_step(struct task_struct *child, bool block)
 	 * So no one should try to use debugger block stepping in a program
 	 * that uses user-mode single stepping itself.
 	 */
-	if (enable_single_step(child) && block) {
-		unsigned long debugctl = get_debugctlmsr();
-
-		debugctl |= DEBUGCTLMSR_BTF;
-		update_debugctlmsr(debugctl);
-		set_tsk_thread_flag(child, TIF_BLOCKSTEP);
-	} else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) {
-		unsigned long debugctl = get_debugctlmsr();
-
-		debugctl &= ~DEBUGCTLMSR_BTF;
-		update_debugctlmsr(debugctl);
-		clear_tsk_thread_flag(child, TIF_BLOCKSTEP);
-	}
+	if (enable_single_step(child) && block)
+		set_task_blockstep(child, true);
+	else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP))
+		set_task_blockstep(child, false);
 }
 
 void user_enable_single_step(struct task_struct *child)
@@ -199,13 +217,8 @@ void user_disable_single_step(struct task_struct *child)
 	/*
 	 * Make sure block stepping (BTF) is disabled.
 	 */
-	if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) {
-		unsigned long debugctl = get_debugctlmsr();
-
-		debugctl &= ~DEBUGCTLMSR_BTF;
-		update_debugctlmsr(debugctl);
-		clear_tsk_thread_flag(child, TIF_BLOCKSTEP);
-	}
+	if (test_tsk_thread_flag(child, TIF_BLOCKSTEP))
+		set_task_blockstep(child, false);
 
 	/* Always clear TIF_SINGLESTEP... */
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index b481341c9369..8276dc6794cc 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -55,6 +55,7 @@
 #include <asm/i387.h>
 #include <asm/fpu-internal.h>
 #include <asm/mce.h>
+#include <asm/rcu.h>
 
 #include <asm/mach_traps.h>
 
@@ -107,30 +108,45 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 	dec_preempt_count();
 }
 
-static void __kprobes
-do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
-	long error_code, siginfo_t *info)
+static int __kprobes
+do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
+		  struct pt_regs *regs,	long error_code)
 {
-	struct task_struct *tsk = current;
-
 #ifdef CONFIG_X86_32
 	if (regs->flags & X86_VM_MASK) {
 		/*
-		 * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
+		 * Traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
 		 * On nmi (interrupt 2), do_trap should not be called.
 		 */
-		if (trapnr < X86_TRAP_UD)
-			goto vm86_trap;
-		goto trap_signal;
+		if (trapnr < X86_TRAP_UD) {
+			if (!handle_vm86_trap((struct kernel_vm86_regs *) regs,
+						error_code, trapnr))
+				return 0;
+		}
+		return -1;
 	}
 #endif
+	if (!user_mode(regs)) {
+		if (!fixup_exception(regs)) {
+			tsk->thread.error_code = error_code;
+			tsk->thread.trap_nr = trapnr;
+			die(str, regs, error_code);
+		}
+		return 0;
+	}
 
-	if (!user_mode(regs))
-		goto kernel_trap;
+	return -1;
+}
 
-#ifdef CONFIG_X86_32
-trap_signal:
-#endif
+static void __kprobes
+do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
+	long error_code, siginfo_t *info)
+{
+	struct task_struct *tsk = current;
+
+
+	if (!do_trap_no_signal(tsk, trapnr, str, regs, error_code))
+		return;
 	/*
 	 * We want error_code and trap_nr set for userspace faults and
 	 * kernelspace faults which result in die(), but not
@@ -158,33 +174,20 @@ trap_signal:
 		force_sig_info(signr, info, tsk);
 	else
 		force_sig(signr, tsk);
-	return;
-
-kernel_trap:
-	if (!fixup_exception(regs)) {
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_nr = trapnr;
-		die(str, regs, error_code);
-	}
-	return;
-
-#ifdef CONFIG_X86_32
-vm86_trap:
-	if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
-						error_code, trapnr))
-		goto trap_signal;
-	return;
-#endif
 }
 
 #define DO_ERROR(trapnr, signr, str, name)				\
 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)	\
 {									\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
+	exception_enter(regs);						\
+	if (notify_die(DIE_TRAP, str, regs, error_code,			\
+			trapnr, signr) == NOTIFY_STOP) {		\
+		exception_exit(regs);					\
 		return;							\
+	}								\
 	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, NULL);		\
+	exception_exit(regs);						\
 }
 
 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)		\
@@ -195,11 +198,15 @@ dotraplinkage void do_##name(struct pt_regs *regs, long error_code)	\
 	info.si_errno = 0;						\
 	info.si_code = sicode;						\
 	info.si_addr = (void __user *)siaddr;				\
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-							== NOTIFY_STOP)	\
+	exception_enter(regs);						\
+	if (notify_die(DIE_TRAP, str, regs, error_code,			\
+			trapnr, signr) == NOTIFY_STOP) {		\
+		exception_exit(regs);					\
 		return;							\
+	}								\
 	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, &info);		\
+	exception_exit(regs);						\
 }
 
 DO_ERROR_INFO(X86_TRAP_DE, SIGFPE, "divide error", divide_error, FPE_INTDIV,
@@ -222,12 +229,14 @@ DO_ERROR_INFO(X86_TRAP_AC, SIGBUS, "alignment check", alignment_check,
 /* Runs on IST stack */
 dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
 {
+	exception_enter(regs);
 	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
-			X86_TRAP_SS, SIGBUS) == NOTIFY_STOP)
-		return;
-	preempt_conditional_sti(regs);
-	do_trap(X86_TRAP_SS, SIGBUS, "stack segment", regs, error_code, NULL);
-	preempt_conditional_cli(regs);
+		       X86_TRAP_SS, SIGBUS) != NOTIFY_STOP) {
+		preempt_conditional_sti(regs);
+		do_trap(X86_TRAP_SS, SIGBUS, "stack segment", regs, error_code, NULL);
+		preempt_conditional_cli(regs);
+	}
+	exception_exit(regs);
 }
 
 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
@@ -235,6 +244,7 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 	static const char str[] = "double fault";
 	struct task_struct *tsk = current;
 
+	exception_enter(regs);
 	/* Return not checked because double check cannot be ignored */
 	notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
 
@@ -255,16 +265,29 @@ do_general_protection(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk;
 
+	exception_enter(regs);
 	conditional_sti(regs);
 
 #ifdef CONFIG_X86_32
-	if (regs->flags & X86_VM_MASK)
-		goto gp_in_vm86;
+	if (regs->flags & X86_VM_MASK) {
+		local_irq_enable();
+		handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
+		goto exit;
+	}
 #endif
 
 	tsk = current;
-	if (!user_mode(regs))
-		goto gp_in_kernel;
+	if (!user_mode(regs)) {
+		if (fixup_exception(regs))
+			goto exit;
+
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_nr = X86_TRAP_GP;
+		if (notify_die(DIE_GPF, "general protection fault", regs, error_code,
+			       X86_TRAP_GP, SIGSEGV) != NOTIFY_STOP)
+			die("general protection fault", regs, error_code);
+		goto exit;
+	}
 
 	tsk->thread.error_code = error_code;
 	tsk->thread.trap_nr = X86_TRAP_GP;
@@ -279,25 +302,8 @@ do_general_protection(struct pt_regs *regs, long error_code)
 	}
 
 	force_sig(SIGSEGV, tsk);
-	return;
-
-#ifdef CONFIG_X86_32
-gp_in_vm86:
-	local_irq_enable();
-	handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
-	return;
-#endif
-
-gp_in_kernel:
-	if (fixup_exception(regs))
-		return;
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_nr = X86_TRAP_GP;
-	if (notify_die(DIE_GPF, "general protection fault", regs, error_code,
-			X86_TRAP_GP, SIGSEGV) == NOTIFY_STOP)
-		return;
-	die("general protection fault", regs, error_code);
+exit:
+	exception_exit(regs);
 }
 
 /* May run on IST stack. */
@@ -312,15 +318,16 @@ dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_co
 	    ftrace_int3_handler(regs))
 		return;
 #endif
+	exception_enter(regs);
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
 				SIGTRAP) == NOTIFY_STOP)
-		return;
+		goto exit;
 #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 
 	if (notify_die(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
 			SIGTRAP) == NOTIFY_STOP)
-		return;
+		goto exit;
 
 	/*
 	 * Let others (NMI) know that the debug stack is in use
@@ -331,6 +338,8 @@ dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_co
 	do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL);
 	preempt_conditional_cli(regs);
 	debug_stack_usage_dec();
+exit:
+	exception_exit(regs);
 }
 
 #ifdef CONFIG_X86_64
@@ -391,6 +400,8 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	unsigned long dr6;
 	int si_code;
 
+	exception_enter(regs);
+
 	get_debugreg(dr6, 6);
 
 	/* Filter out all the reserved bits which are preset to 1 */
@@ -406,7 +417,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 
 	/* Catch kmemcheck conditions first of all! */
 	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
-		return;
+		goto exit;
 
 	/* DR6 may or may not be cleared by the CPU */
 	set_debugreg(0, 6);
@@ -421,7 +432,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 
 	if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
 							SIGTRAP) == NOTIFY_STOP)
-		return;
+		goto exit;
 
 	/*
 	 * Let others (NMI) know that the debug stack is in use
@@ -437,7 +448,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 					X86_TRAP_DB);
 		preempt_conditional_cli(regs);
 		debug_stack_usage_dec();
-		return;
+		goto exit;
 	}
 
 	/*
@@ -458,7 +469,8 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	preempt_conditional_cli(regs);
 	debug_stack_usage_dec();
 
-	return;
+exit:
+	exception_exit(regs);
 }
 
 /*
@@ -555,14 +567,17 @@ dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
 #ifdef CONFIG_X86_32
 	ignore_fpu_irq = 1;
 #endif
-
+	exception_enter(regs);
 	math_error(regs, error_code, X86_TRAP_MF);
+	exception_exit(regs);
 }
 
 dotraplinkage void
 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
 {
+	exception_enter(regs);
 	math_error(regs, error_code, X86_TRAP_XF);
+	exception_exit(regs);
 }
 
 dotraplinkage void
@@ -613,11 +628,12 @@ void math_state_restore(void)
 	}
 
 	__thread_fpu_begin(tsk);
+
 	/*
 	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
 	 */
 	if (unlikely(restore_fpu_checking(tsk))) {
-		__thread_fpu_end(tsk);
+		drop_init_fpu(tsk);
 		force_sig(SIGSEGV, tsk);
 		return;
 	}
@@ -629,6 +645,9 @@ EXPORT_SYMBOL_GPL(math_state_restore);
 dotraplinkage void __kprobes
 do_device_not_available(struct pt_regs *regs, long error_code)
 {
+	exception_enter(regs);
+	BUG_ON(use_eager_fpu());
+
 #ifdef CONFIG_MATH_EMULATION
 	if (read_cr0() & X86_CR0_EM) {
 		struct math_emu_info info = { };
@@ -637,6 +656,7 @@ do_device_not_available(struct pt_regs *regs, long error_code)
 
 		info.regs = regs;
 		math_emulate(&info);
+		exception_exit(regs);
 		return;
 	}
 #endif
@@ -644,12 +664,15 @@ do_device_not_available(struct pt_regs *regs, long error_code)
 #ifdef CONFIG_X86_32
 	conditional_sti(regs);
 #endif
+	exception_exit(regs);
 }
 
 #ifdef CONFIG_X86_32
 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
 {
 	siginfo_t info;
+
+	exception_enter(regs);
 	local_irq_enable();
 
 	info.si_signo = SIGILL;
@@ -657,10 +680,11 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
 	info.si_code = ILL_BADSTK;
 	info.si_addr = NULL;
 	if (notify_die(DIE_TRAP, "iret exception", regs, error_code,
-			X86_TRAP_IRET, SIGILL) == NOTIFY_STOP)
-		return;
-	do_trap(X86_TRAP_IRET, SIGILL, "iret exception", regs, error_code,
-		&info);
+			X86_TRAP_IRET, SIGILL) != NOTIFY_STOP) {
+		do_trap(X86_TRAP_IRET, SIGILL, "iret exception", regs, error_code,
+			&info);
+	}
+	exception_exit(regs);
 }
 #endif
 
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 36fd42091fa7..9538f00827a9 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -41,6 +41,9 @@
 /* Adjust the return address of a call insn */
 #define UPROBE_FIX_CALL	0x2
 
+/* Instruction will modify TF, don't change it */
+#define UPROBE_FIX_SETF	0x4
+
 #define UPROBE_FIX_RIP_AX	0x8000
 #define UPROBE_FIX_RIP_CX	0x4000
 
@@ -239,6 +242,10 @@ static void prepare_fixups(struct arch_uprobe *auprobe, struct insn *insn)
 	insn_get_opcode(insn);	/* should be a nop */
 
 	switch (OPCODE1(insn)) {
+	case 0x9d:
+		/* popf */
+		auprobe->fixups |= UPROBE_FIX_SETF;
+		break;
 	case 0xc3:		/* ret/lret */
 	case 0xcb:
 	case 0xc2:
@@ -646,7 +653,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
  * Skip these instructions as per the currently known x86 ISA.
  * 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 }
  */
-bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
 	int i;
 
@@ -673,3 +680,46 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	}
 	return false;
 }
+
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	bool ret = __skip_sstep(auprobe, regs);
+	if (ret && (regs->flags & X86_EFLAGS_TF))
+		send_sig(SIGTRAP, current, 0);
+	return ret;
+}
+
+void arch_uprobe_enable_step(struct arch_uprobe *auprobe)
+{
+	struct task_struct *task = current;
+	struct arch_uprobe_task	*autask	= &task->utask->autask;
+	struct pt_regs *regs = task_pt_regs(task);
+
+	autask->saved_tf = !!(regs->flags & X86_EFLAGS_TF);
+
+	regs->flags |= X86_EFLAGS_TF;
+	if (test_tsk_thread_flag(task, TIF_BLOCKSTEP))
+		set_task_blockstep(task, false);
+}
+
+void arch_uprobe_disable_step(struct arch_uprobe *auprobe)
+{
+	struct task_struct *task = current;
+	struct arch_uprobe_task	*autask	= &task->utask->autask;
+	bool trapped = (task->utask->state == UTASK_SSTEP_TRAPPED);
+	struct pt_regs *regs = task_pt_regs(task);
+	/*
+	 * The state of TIF_BLOCKSTEP was not saved so we can get an extra
+	 * SIGTRAP if we do not clear TF. We need to examine the opcode to
+	 * make it right.
+	 */
+	if (unlikely(trapped)) {
+		if (!autask->saved_tf)
+			regs->flags &= ~X86_EFLAGS_TF;
+	} else {
+		if (autask->saved_tf)
+			send_sig(SIGTRAP, task, 0);
+		else if (!(auprobe->fixups & UPROBE_FIX_SETF))
+			regs->flags &= ~X86_EFLAGS_TF;
+	}
+}
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 6020f6f5927c..1330dd102950 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -13,9 +13,13 @@
 #include <asm/ftrace.h>
 
 #ifdef CONFIG_FUNCTION_TRACER
-/* mcount is defined in assembly */
+/* mcount and __fentry__ are defined in assembly */
+#ifdef CC_USING_FENTRY
+EXPORT_SYMBOL(__fentry__);
+#else
 EXPORT_SYMBOL(mcount);
 #endif
+#endif
 
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 9f3167e891ef..7a3d075a814a 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -26,7 +26,6 @@
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
-void __init x86_init_pgd_noop(pgd_t *unused) { }
 int __init iommu_init_noop(void) { return 0; }
 void iommu_shutdown_noop(void) { }
 
@@ -68,8 +67,7 @@ struct x86_init_ops x86_init __initdata = {
 	},
 
 	.paging = {
-		.pagetable_setup_start	= native_pagetable_setup_start,
-		.pagetable_setup_done	= native_pagetable_setup_done,
+		.pagetable_init		= native_pagetable_init,
 	},
 
 	.timers = {
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 3d3e20709119..ada87a329edc 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -10,9 +10,7 @@
 #include <linux/compat.h>
 #include <asm/i387.h>
 #include <asm/fpu-internal.h>
-#ifdef CONFIG_IA32_EMULATION
-#include <asm/sigcontext32.h>
-#endif
+#include <asm/sigframe.h>
 #include <asm/xcr.h>
 
 /*
@@ -23,13 +21,9 @@ u64 pcntxt_mask;
 /*
  * Represents init state for the supported extended state.
  */
-static struct xsave_struct *init_xstate_buf;
-
-struct _fpx_sw_bytes fx_sw_reserved;
-#ifdef CONFIG_IA32_EMULATION
-struct _fpx_sw_bytes fx_sw_reserved_ia32;
-#endif
+struct xsave_struct *init_xstate_buf;
 
+static struct _fpx_sw_bytes fx_sw_reserved, fx_sw_reserved_ia32;
 static unsigned int *xstate_offsets, *xstate_sizes, xstate_features;
 
 /*
@@ -44,9 +38,9 @@ static unsigned int *xstate_offsets, *xstate_sizes, xstate_features;
  */
 void __sanitize_i387_state(struct task_struct *tsk)
 {
-	u64 xstate_bv;
-	int feature_bit = 0x2;
 	struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave;
+	int feature_bit = 0x2;
+	u64 xstate_bv;
 
 	if (!fx)
 		return;
@@ -104,213 +98,326 @@ void __sanitize_i387_state(struct task_struct *tsk)
  * Check for the presence of extended state information in the
  * user fpstate pointer in the sigcontext.
  */
-int check_for_xstate(struct i387_fxsave_struct __user *buf,
-		     void __user *fpstate,
-		     struct _fpx_sw_bytes *fx_sw_user)
+static inline int check_for_xstate(struct i387_fxsave_struct __user *buf,
+				   void __user *fpstate,
+				   struct _fpx_sw_bytes *fx_sw)
 {
 	int min_xstate_size = sizeof(struct i387_fxsave_struct) +
 			      sizeof(struct xsave_hdr_struct);
 	unsigned int magic2;
-	int err;
 
-	err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0],
-			       sizeof(struct _fpx_sw_bytes));
-	if (err)
-		return -EFAULT;
+	if (__copy_from_user(fx_sw, &buf->sw_reserved[0], sizeof(*fx_sw)))
+		return -1;
 
-	/*
-	 * First Magic check failed.
-	 */
-	if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1)
-		return -EINVAL;
+	/* Check for the first magic field and other error scenarios. */
+	if (fx_sw->magic1 != FP_XSTATE_MAGIC1 ||
+	    fx_sw->xstate_size < min_xstate_size ||
+	    fx_sw->xstate_size > xstate_size ||
+	    fx_sw->xstate_size > fx_sw->extended_size)
+		return -1;
 
 	/*
-	 * Check for error scenarios.
-	 */
-	if (fx_sw_user->xstate_size < min_xstate_size ||
-	    fx_sw_user->xstate_size > xstate_size ||
-	    fx_sw_user->xstate_size > fx_sw_user->extended_size)
-		return -EINVAL;
-
-	err = __get_user(magic2, (__u32 *) (((void *)fpstate) +
-					    fx_sw_user->extended_size -
-					    FP_XSTATE_MAGIC2_SIZE));
-	if (err)
-		return err;
-	/*
 	 * Check for the presence of second magic word at the end of memory
 	 * layout. This detects the case where the user just copied the legacy
 	 * fpstate layout with out copying the extended state information
 	 * in the memory layout.
 	 */
-	if (magic2 != FP_XSTATE_MAGIC2)
-		return -EFAULT;
+	if (__get_user(magic2, (__u32 __user *)(fpstate + fx_sw->xstate_size))
+	    || magic2 != FP_XSTATE_MAGIC2)
+		return -1;
 
 	return 0;
 }
 
-#ifdef CONFIG_X86_64
 /*
  * Signal frame handlers.
  */
-
-int save_i387_xstate(void __user *buf)
+static inline int save_fsave_header(struct task_struct *tsk, void __user *buf)
 {
-	struct task_struct *tsk = current;
-	int err = 0;
-
-	if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size))
-		return -EACCES;
+	if (use_fxsr()) {
+		struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave;
+		struct user_i387_ia32_struct env;
+		struct _fpstate_ia32 __user *fp = buf;
 
-	BUG_ON(sig_xstate_size < xstate_size);
+		convert_from_fxsr(&env, tsk);
 
-	if ((unsigned long)buf % 64)
-		pr_err("%s: bad fpstate %p\n", __func__, buf);
-
-	if (!used_math())
-		return 0;
-
-	if (user_has_fpu()) {
-		if (use_xsave())
-			err = xsave_user(buf);
-		else
-			err = fxsave_user(buf);
-
-		if (err)
-			return err;
-		user_fpu_end();
+		if (__copy_to_user(buf, &env, sizeof(env)) ||
+		    __put_user(xsave->i387.swd, &fp->status) ||
+		    __put_user(X86_FXSR_MAGIC, &fp->magic))
+			return -1;
 	} else {
-		sanitize_i387_state(tsk);
-		if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
-				   xstate_size))
+		struct i387_fsave_struct __user *fp = buf;
+		u32 swd;
+		if (__get_user(swd, &fp->swd) || __put_user(swd, &fp->status))
 			return -1;
 	}
 
-	clear_used_math(); /* trigger finit */
+	return 0;
+}
 
-	if (use_xsave()) {
-		struct _fpstate __user *fx = buf;
-		struct _xstate __user *x = buf;
-		u64 xstate_bv;
+static inline int save_xstate_epilog(void __user *buf, int ia32_frame)
+{
+	struct xsave_struct __user *x = buf;
+	struct _fpx_sw_bytes *sw_bytes;
+	u32 xstate_bv;
+	int err;
 
-		err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
-				     sizeof(struct _fpx_sw_bytes));
+	/* Setup the bytes not touched by the [f]xsave and reserved for SW. */
+	sw_bytes = ia32_frame ? &fx_sw_reserved_ia32 : &fx_sw_reserved;
+	err = __copy_to_user(&x->i387.sw_reserved, sw_bytes, sizeof(*sw_bytes));
 
-		err |= __put_user(FP_XSTATE_MAGIC2,
-				  (__u32 __user *) (buf + sig_xstate_size
-						    - FP_XSTATE_MAGIC2_SIZE));
+	if (!use_xsave())
+		return err;
 
-		/*
-		 * Read the xstate_bv which we copied (directly from the cpu or
-		 * from the state in task struct) to the user buffers and
-		 * set the FP/SSE bits.
-		 */
-		err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+	err |= __put_user(FP_XSTATE_MAGIC2, (__u32 *)(buf + xstate_size));
 
-		/*
-		 * For legacy compatible, we always set FP/SSE bits in the bit
-		 * vector while saving the state to the user context. This will
-		 * enable us capturing any changes(during sigreturn) to
-		 * the FP/SSE bits by the legacy applications which don't touch
-		 * xstate_bv in the xsave header.
-		 *
-		 * xsave aware apps can change the xstate_bv in the xsave
-		 * header as well as change any contents in the memory layout.
-		 * xrestore as part of sigreturn will capture all the changes.
-		 */
-		xstate_bv |= XSTATE_FPSSE;
+	/*
+	 * Read the xstate_bv which we copied (directly from the cpu or
+	 * from the state in task struct) to the user buffers.
+	 */
+	err |= __get_user(xstate_bv, (__u32 *)&x->xsave_hdr.xstate_bv);
 
-		err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+	/*
+	 * For legacy compatible, we always set FP/SSE bits in the bit
+	 * vector while saving the state to the user context. This will
+	 * enable us capturing any changes(during sigreturn) to
+	 * the FP/SSE bits by the legacy applications which don't touch
+	 * xstate_bv in the xsave header.
+	 *
+	 * xsave aware apps can change the xstate_bv in the xsave
+	 * header as well as change any contents in the memory layout.
+	 * xrestore as part of sigreturn will capture all the changes.
+	 */
+	xstate_bv |= XSTATE_FPSSE;
 
-		if (err)
-			return err;
-	}
+	err |= __put_user(xstate_bv, (__u32 *)&x->xsave_hdr.xstate_bv);
 
-	return 1;
+	return err;
+}
+
+static inline int save_user_xstate(struct xsave_struct __user *buf)
+{
+	int err;
+
+	if (use_xsave())
+		err = xsave_user(buf);
+	else if (use_fxsr())
+		err = fxsave_user((struct i387_fxsave_struct __user *) buf);
+	else
+		err = fsave_user((struct i387_fsave_struct __user *) buf);
+
+	if (unlikely(err) && __clear_user(buf, xstate_size))
+		err = -EFAULT;
+	return err;
 }
 
 /*
- * Restore the extended state if present. Otherwise, restore the FP/SSE
- * state.
+ * Save the fpu, extended register state to the user signal frame.
+ *
+ * 'buf_fx' is the 64-byte aligned pointer at which the [f|fx|x]save
+ *  state is copied.
+ *  'buf' points to the 'buf_fx' or to the fsave header followed by 'buf_fx'.
+ *
+ *	buf == buf_fx for 64-bit frames and 32-bit fsave frame.
+ *	buf != buf_fx for 32-bit frames with fxstate.
+ *
+ * If the fpu, extended register state is live, save the state directly
+ * to the user frame pointed by the aligned pointer 'buf_fx'. Otherwise,
+ * copy the thread's fpu state to the user frame starting at 'buf_fx'.
+ *
+ * If this is a 32-bit frame with fxstate, put a fsave header before
+ * the aligned state at 'buf_fx'.
+ *
+ * For [f]xsave state, update the SW reserved fields in the [f]xsave frame
+ * indicating the absence/presence of the extended state to the user.
  */
-static int restore_user_xstate(void __user *buf)
+int save_xstate_sig(void __user *buf, void __user *buf_fx, int size)
 {
-	struct _fpx_sw_bytes fx_sw_user;
-	u64 mask;
-	int err;
+	struct xsave_struct *xsave = &current->thread.fpu.state->xsave;
+	struct task_struct *tsk = current;
+	int ia32_fxstate = (buf != buf_fx);
 
-	if (((unsigned long)buf % 64) ||
-	     check_for_xstate(buf, buf, &fx_sw_user))
-		goto fx_only;
+	ia32_fxstate &= (config_enabled(CONFIG_X86_32) ||
+			 config_enabled(CONFIG_IA32_EMULATION));
 
-	mask = fx_sw_user.xstate_bv;
+	if (!access_ok(VERIFY_WRITE, buf, size))
+		return -EACCES;
 
-	/*
-	 * restore the state passed by the user.
-	 */
-	err = xrestore_user(buf, mask);
-	if (err)
-		return err;
+	if (!HAVE_HWFP)
+		return fpregs_soft_get(current, NULL, 0,
+			sizeof(struct user_i387_ia32_struct), NULL,
+			(struct _fpstate_ia32 __user *) buf) ? -1 : 1;
 
-	/*
-	 * init the state skipped by the user.
-	 */
-	mask = pcntxt_mask & ~mask;
-	if (unlikely(mask))
-		xrstor_state(init_xstate_buf, mask);
+	if (user_has_fpu()) {
+		/* Save the live register state to the user directly. */
+		if (save_user_xstate(buf_fx))
+			return -1;
+		/* Update the thread's fxstate to save the fsave header. */
+		if (ia32_fxstate)
+			fpu_fxsave(&tsk->thread.fpu);
+	} else {
+		sanitize_i387_state(tsk);
+		if (__copy_to_user(buf_fx, xsave, xstate_size))
+			return -1;
+	}
+
+	/* Save the fsave header for the 32-bit frames. */
+	if ((ia32_fxstate || !use_fxsr()) && save_fsave_header(tsk, buf))
+		return -1;
+
+	if (use_fxsr() && save_xstate_epilog(buf_fx, ia32_fxstate))
+		return -1;
+
+	drop_init_fpu(tsk);	/* trigger finit */
 
 	return 0;
+}
 
-fx_only:
-	/*
-	 * couldn't find the extended state information in the
-	 * memory layout. Restore just the FP/SSE and init all
-	 * the other extended state.
-	 */
-	xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE);
-	return fxrstor_checking((__force struct i387_fxsave_struct *)buf);
+static inline void
+sanitize_restored_xstate(struct task_struct *tsk,
+			 struct user_i387_ia32_struct *ia32_env,
+			 u64 xstate_bv, int fx_only)
+{
+	struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave;
+	struct xsave_hdr_struct *xsave_hdr = &xsave->xsave_hdr;
+
+	if (use_xsave()) {
+		/* These bits must be zero. */
+		xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
+
+		/*
+		 * Init the state that is not present in the memory
+		 * layout and not enabled by the OS.
+		 */
+		if (fx_only)
+			xsave_hdr->xstate_bv = XSTATE_FPSSE;
+		else
+			xsave_hdr->xstate_bv &= (pcntxt_mask & xstate_bv);
+	}
+
+	if (use_fxsr()) {
+		/*
+		 * mscsr reserved bits must be masked to zero for security
+		 * reasons.
+		 */
+		xsave->i387.mxcsr &= mxcsr_feature_mask;
+
+		convert_to_fxsr(tsk, ia32_env);
+	}
 }
 
 /*
- * This restores directly out of user space. Exceptions are handled.
+ * Restore the extended state if present. Otherwise, restore the FP/SSE state.
  */
-int restore_i387_xstate(void __user *buf)
+static inline int restore_user_xstate(void __user *buf, u64 xbv, int fx_only)
 {
+	if (use_xsave()) {
+		if ((unsigned long)buf % 64 || fx_only) {
+			u64 init_bv = pcntxt_mask & ~XSTATE_FPSSE;
+			xrstor_state(init_xstate_buf, init_bv);
+			return fxrstor_user(buf);
+		} else {
+			u64 init_bv = pcntxt_mask & ~xbv;
+			if (unlikely(init_bv))
+				xrstor_state(init_xstate_buf, init_bv);
+			return xrestore_user(buf, xbv);
+		}
+	} else if (use_fxsr()) {
+		return fxrstor_user(buf);
+	} else
+		return frstor_user(buf);
+}
+
+int __restore_xstate_sig(void __user *buf, void __user *buf_fx, int size)
+{
+	int ia32_fxstate = (buf != buf_fx);
 	struct task_struct *tsk = current;
-	int err = 0;
+	int state_size = xstate_size;
+	u64 xstate_bv = 0;
+	int fx_only = 0;
+
+	ia32_fxstate &= (config_enabled(CONFIG_X86_32) ||
+			 config_enabled(CONFIG_IA32_EMULATION));
 
 	if (!buf) {
-		if (used_math())
-			goto clear;
+		drop_init_fpu(tsk);
 		return 0;
-	} else
-		if (!access_ok(VERIFY_READ, buf, sig_xstate_size))
-			return -EACCES;
+	}
 
-	if (!used_math()) {
-		err = init_fpu(tsk);
-		if (err)
-			return err;
+	if (!access_ok(VERIFY_READ, buf, size))
+		return -EACCES;
+
+	if (!used_math() && init_fpu(tsk))
+		return -1;
+
+	if (!HAVE_HWFP) {
+		return fpregs_soft_set(current, NULL,
+				       0, sizeof(struct user_i387_ia32_struct),
+				       NULL, buf) != 0;
 	}
 
-	user_fpu_begin();
-	if (use_xsave())
-		err = restore_user_xstate(buf);
-	else
-		err = fxrstor_checking((__force struct i387_fxsave_struct *)
-				       buf);
-	if (unlikely(err)) {
+	if (use_xsave()) {
+		struct _fpx_sw_bytes fx_sw_user;
+		if (unlikely(check_for_xstate(buf_fx, buf_fx, &fx_sw_user))) {
+			/*
+			 * Couldn't find the extended state information in the
+			 * memory layout. Restore just the FP/SSE and init all
+			 * the other extended state.
+			 */
+			state_size = sizeof(struct i387_fxsave_struct);
+			fx_only = 1;
+		} else {
+			state_size = fx_sw_user.xstate_size;
+			xstate_bv = fx_sw_user.xstate_bv;
+		}
+	}
+
+	if (ia32_fxstate) {
+		/*
+		 * For 32-bit frames with fxstate, copy the user state to the
+		 * thread's fpu state, reconstruct fxstate from the fsave
+		 * header. Sanitize the copied state etc.
+		 */
+		struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave;
+		struct user_i387_ia32_struct env;
+		int err = 0;
+
+		/*
+		 * Drop the current fpu which clears used_math(). This ensures
+		 * that any context-switch during the copy of the new state,
+		 * avoids the intermediate state from getting restored/saved.
+		 * Thus avoiding the new restored state from getting corrupted.
+		 * We will be ready to restore/save the state only after
+		 * set_used_math() is again set.
+		 */
+		drop_fpu(tsk);
+
+		if (__copy_from_user(xsave, buf_fx, state_size) ||
+		    __copy_from_user(&env, buf, sizeof(env))) {
+			err = -1;
+		} else {
+			sanitize_restored_xstate(tsk, &env, xstate_bv, fx_only);
+			set_used_math();
+		}
+
+		if (use_eager_fpu())
+			math_state_restore();
+
+		return err;
+	} else {
 		/*
-		 * Encountered an error while doing the restore from the
-		 * user buffer, clear the fpu state.
+		 * For 64-bit frames and 32-bit fsave frames, restore the user
+		 * state to the registers directly (with exceptions handled).
 		 */
-clear:
-		clear_fpu(tsk);
-		clear_used_math();
+		user_fpu_begin();
+		if (restore_user_xstate(buf_fx, xstate_bv, fx_only)) {
+			drop_init_fpu(tsk);
+			return -1;
+		}
 	}
-	return err;
+
+	return 0;
 }
-#endif
 
 /*
  * Prepare the SW reserved portion of the fxsave memory layout, indicating
@@ -321,31 +428,22 @@ clear:
  */
 static void prepare_fx_sw_frame(void)
 {
-	int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) +
-			     FP_XSTATE_MAGIC2_SIZE;
+	int fsave_header_size = sizeof(struct i387_fsave_struct);
+	int size = xstate_size + FP_XSTATE_MAGIC2_SIZE;
 
-	sig_xstate_size = sizeof(struct _fpstate) + size_extended;
-
-#ifdef CONFIG_IA32_EMULATION
-	sig_xstate_ia32_size = sizeof(struct _fpstate_ia32) + size_extended;
-#endif
-
-	memset(&fx_sw_reserved, 0, sizeof(fx_sw_reserved));
+	if (config_enabled(CONFIG_X86_32))
+		size += fsave_header_size;
 
 	fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
-	fx_sw_reserved.extended_size = sig_xstate_size;
+	fx_sw_reserved.extended_size = size;
 	fx_sw_reserved.xstate_bv = pcntxt_mask;
 	fx_sw_reserved.xstate_size = xstate_size;
-#ifdef CONFIG_IA32_EMULATION
-	memcpy(&fx_sw_reserved_ia32, &fx_sw_reserved,
-	       sizeof(struct _fpx_sw_bytes));
-	fx_sw_reserved_ia32.extended_size = sig_xstate_ia32_size;
-#endif
-}
 
-#ifdef CONFIG_X86_64
-unsigned int sig_xstate_size = sizeof(struct _fpstate);
-#endif
+	if (config_enabled(CONFIG_IA32_EMULATION)) {
+		fx_sw_reserved_ia32 = fx_sw_reserved;
+		fx_sw_reserved_ia32.extended_size += fsave_header_size;
+	}
+}
 
 /*
  * Enable the extended processor state save/restore feature
@@ -384,19 +482,21 @@ static void __init setup_xstate_features(void)
 /*
  * setup the xstate image representing the init state
  */
-static void __init setup_xstate_init(void)
+static void __init setup_init_fpu_buf(void)
 {
-	setup_xstate_features();
-
 	/*
 	 * Setup init_xstate_buf to represent the init state of
 	 * all the features managed by the xsave
 	 */
 	init_xstate_buf = alloc_bootmem_align(xstate_size,
 					      __alignof__(struct xsave_struct));
-	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
+	fx_finit(&init_xstate_buf->i387);
+
+	if (!cpu_has_xsave)
+		return;
+
+	setup_xstate_features();
 
-	clts();
 	/*
 	 * Init all the features state with header_bv being 0x0
 	 */
@@ -406,9 +506,21 @@ static void __init setup_xstate_init(void)
 	 * of any feature which is not represented by all zero's.
 	 */
 	xsave_state(init_xstate_buf, -1);
-	stts();
 }
 
+static enum { AUTO, ENABLE, DISABLE } eagerfpu = AUTO;
+static int __init eager_fpu_setup(char *s)
+{
+	if (!strcmp(s, "on"))
+		eagerfpu = ENABLE;
+	else if (!strcmp(s, "off"))
+		eagerfpu = DISABLE;
+	else if (!strcmp(s, "auto"))
+		eagerfpu = AUTO;
+	return 1;
+}
+__setup("eagerfpu=", eager_fpu_setup);
+
 /*
  * Enable and initialize the xsave feature.
  */
@@ -445,8 +557,11 @@ static void __init xstate_enable_boot_cpu(void)
 
 	update_regset_xstate_info(xstate_size, pcntxt_mask);
 	prepare_fx_sw_frame();
+	setup_init_fpu_buf();
 
-	setup_xstate_init();
+	/* Auto enable eagerfpu for xsaveopt */
+	if (cpu_has_xsaveopt && eagerfpu != DISABLE)
+		eagerfpu = ENABLE;
 
 	pr_info("enabled xstate_bv 0x%llx, cntxt size 0x%x\n",
 		pcntxt_mask, xstate_size);
@@ -471,3 +586,43 @@ void __cpuinit xsave_init(void)
 	next_func = xstate_enable;
 	this_func();
 }
+
+static inline void __init eager_fpu_init_bp(void)
+{
+	current->thread.fpu.state =
+	    alloc_bootmem_align(xstate_size, __alignof__(struct xsave_struct));
+	if (!init_xstate_buf)
+		setup_init_fpu_buf();
+}
+
+void __cpuinit eager_fpu_init(void)
+{
+	static __refdata void (*boot_func)(void) = eager_fpu_init_bp;
+
+	clear_used_math();
+	current_thread_info()->status = 0;
+
+	if (eagerfpu == ENABLE)
+		setup_force_cpu_cap(X86_FEATURE_EAGER_FPU);
+
+	if (!cpu_has_eager_fpu) {
+		stts();
+		return;
+	}
+
+	if (boot_func) {
+		boot_func();
+		boot_func = NULL;
+	}
+
+	/*
+	 * This is same as math_state_restore(). But use_xsave() is
+	 * not yet patched to use math_state_restore().
+	 */
+	init_fpu(current);
+	__thread_fpu_begin(current);
+	if (cpu_has_xsave)
+		xrstor_state(init_xstate_buf, -1);
+	else
+		fxrstor_checking(&init_xstate_buf->i387);
+}
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index a28f338843ea..586f00059805 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -20,6 +20,7 @@ if VIRTUALIZATION
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
+	depends on HIGH_RES_TIMERS
 	# for device assignment:
 	depends on PCI
 	# for TASKSTATS/TASK_DELAY_ACCT:
@@ -37,6 +38,7 @@ config KVM
 	select TASK_DELAY_ACCT
 	select PERF_EVENTS
 	select HAVE_KVM_MSI
+	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 4f579e8dcacf..04d30401c5cb 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -12,7 +12,7 @@ kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 kvm-$(CONFIG_KVM_ASYNC_PF)	+= $(addprefix ../../../virt/kvm/, async_pf.o)
 
 kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
-			   i8254.o timer.o cpuid.o pmu.o
+			   i8254.o cpuid.o pmu.o
 kvm-intel-y		+= vmx.o
 kvm-amd-y		+= svm.o
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 0595f1397b7c..ec79e773342e 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -316,7 +316,7 @@ static int do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	}
 	case 7: {
 		entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
-		/* Mask ebx against host capbability word 9 */
+		/* Mask ebx against host capability word 9 */
 		if (index == 0) {
 			entry->ebx &= kvm_supported_word9_x86_features;
 			cpuid_mask(&entry->ebx, 9);
@@ -397,8 +397,8 @@ static int do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		break;
 	}
 	case KVM_CPUID_SIGNATURE: {
-		char signature[12] = "KVMKVMKVM\0\0";
-		u32 *sigptr = (u32 *)signature;
+		static const char signature[12] = "KVMKVMKVM\0\0";
+		const u32 *sigptr = (const u32 *)signature;
 		entry->eax = KVM_CPUID_FEATURES;
 		entry->ebx = sigptr[0];
 		entry->ecx = sigptr[1];
@@ -484,10 +484,10 @@ struct kvm_cpuid_param {
 	u32 func;
 	u32 idx;
 	bool has_leaf_count;
-	bool (*qualifier)(struct kvm_cpuid_param *param);
+	bool (*qualifier)(const struct kvm_cpuid_param *param);
 };
 
-static bool is_centaur_cpu(struct kvm_cpuid_param *param)
+static bool is_centaur_cpu(const struct kvm_cpuid_param *param)
 {
 	return boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR;
 }
@@ -498,7 +498,7 @@ int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 	struct kvm_cpuid_entry2 *cpuid_entries;
 	int limit, nent = 0, r = -E2BIG, i;
 	u32 func;
-	static struct kvm_cpuid_param param[] = {
+	static const struct kvm_cpuid_param param[] = {
 		{ .func = 0, .has_leaf_count = true },
 		{ .func = 0x80000000, .has_leaf_count = true },
 		{ .func = 0xC0000000, .qualifier = is_centaur_cpu, .has_leaf_count = true },
@@ -517,7 +517,7 @@ int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 
 	r = 0;
 	for (i = 0; i < ARRAY_SIZE(param); i++) {
-		struct kvm_cpuid_param *ent = &param[i];
+		const struct kvm_cpuid_param *ent = &param[i];
 
 		if (ent->qualifier && !ent->qualifier(ent))
 			continue;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 97d9a9914ba8..39171cb307ea 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -161,9 +161,9 @@ struct opcode {
 	u64 intercept : 8;
 	union {
 		int (*execute)(struct x86_emulate_ctxt *ctxt);
-		struct opcode *group;
-		struct group_dual *gdual;
-		struct gprefix *gprefix;
+		const struct opcode *group;
+		const struct group_dual *gdual;
+		const struct gprefix *gprefix;
 	} u;
 	int (*check_perm)(struct x86_emulate_ctxt *ctxt);
 };
@@ -202,6 +202,42 @@ struct gprefix {
 #define EFLG_RESERVED_ZEROS_MASK 0xffc0802a
 #define EFLG_RESERVED_ONE_MASK 2
 
+static ulong reg_read(struct x86_emulate_ctxt *ctxt, unsigned nr)
+{
+	if (!(ctxt->regs_valid & (1 << nr))) {
+		ctxt->regs_valid |= 1 << nr;
+		ctxt->_regs[nr] = ctxt->ops->read_gpr(ctxt, nr);
+	}
+	return ctxt->_regs[nr];
+}
+
+static ulong *reg_write(struct x86_emulate_ctxt *ctxt, unsigned nr)
+{
+	ctxt->regs_valid |= 1 << nr;
+	ctxt->regs_dirty |= 1 << nr;
+	return &ctxt->_regs[nr];
+}
+
+static ulong *reg_rmw(struct x86_emulate_ctxt *ctxt, unsigned nr)
+{
+	reg_read(ctxt, nr);
+	return reg_write(ctxt, nr);
+}
+
+static void writeback_registers(struct x86_emulate_ctxt *ctxt)
+{
+	unsigned reg;
+
+	for_each_set_bit(reg, (ulong *)&ctxt->regs_dirty, 16)
+		ctxt->ops->write_gpr(ctxt, reg, ctxt->_regs[reg]);
+}
+
+static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
+{
+	ctxt->regs_dirty = 0;
+	ctxt->regs_valid = 0;
+}
+
 /*
  * Instruction emulation:
  * Most instructions are emulated directly via a fragment of inline assembly
@@ -374,8 +410,8 @@ struct gprefix {
 #define __emulate_1op_rax_rdx(ctxt, _op, _suffix, _ex)			\
 	do {								\
 		unsigned long _tmp;					\
-		ulong *rax = &(ctxt)->regs[VCPU_REGS_RAX];		\
-		ulong *rdx = &(ctxt)->regs[VCPU_REGS_RDX];		\
+		ulong *rax = reg_rmw((ctxt), VCPU_REGS_RAX);		\
+		ulong *rdx = reg_rmw((ctxt), VCPU_REGS_RDX);		\
 									\
 		__asm__ __volatile__ (					\
 			_PRE_EFLAGS("0", "5", "1")			\
@@ -475,13 +511,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg)
 	return address_mask(ctxt, reg);
 }
 
+static void masked_increment(ulong *reg, ulong mask, int inc)
+{
+	assign_masked(reg, *reg + inc, mask);
+}
+
 static inline void
 register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc)
 {
+	ulong mask;
+
 	if (ctxt->ad_bytes == sizeof(unsigned long))
-		*reg += inc;
+		mask = ~0UL;
 	else
-		*reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt));
+		mask = ad_mask(ctxt);
+	masked_increment(reg, mask, inc);
+}
+
+static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc)
+{
+	masked_increment(reg_rmw(ctxt, VCPU_REGS_RSP), stack_mask(ctxt), inc);
 }
 
 static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel)
@@ -619,8 +668,6 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 
 	la = seg_base(ctxt, addr.seg) + addr.ea;
 	switch (ctxt->mode) {
-	case X86EMUL_MODE_REAL:
-		break;
 	case X86EMUL_MODE_PROT64:
 		if (((signed long)la << 16) >> 16 != la)
 			return emulate_gp(ctxt, 0);
@@ -642,7 +689,7 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 			if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
 				goto bad;
 		} else {
-			/* exapand-down segment */
+			/* expand-down segment */
 			if (addr.ea <= lim || (u32)(addr.ea + size - 1) <= lim)
 				goto bad;
 			lim = desc.d ? 0xffffffff : 0xffff;
@@ -650,7 +697,10 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 				goto bad;
 		}
 		cpl = ctxt->ops->cpl(ctxt);
-		rpl = sel & 3;
+		if (ctxt->mode == X86EMUL_MODE_REAL)
+			rpl = 0;
+		else
+			rpl = sel & 3;
 		cpl = max(cpl, rpl);
 		if (!(desc.type & 8)) {
 			/* data segment */
@@ -675,9 +725,9 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 	return X86EMUL_CONTINUE;
 bad:
 	if (addr.seg == VCPU_SREG_SS)
-		return emulate_ss(ctxt, addr.seg);
+		return emulate_ss(ctxt, sel);
 	else
-		return emulate_gp(ctxt, addr.seg);
+		return emulate_gp(ctxt, sel);
 }
 
 static int linearize(struct x86_emulate_ctxt *ctxt,
@@ -773,14 +823,15 @@ static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
  * pointer into the block that addresses the relevant register.
  * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
  */
-static void *decode_register(u8 modrm_reg, unsigned long *regs,
+static void *decode_register(struct x86_emulate_ctxt *ctxt, u8 modrm_reg,
 			     int highbyte_regs)
 {
 	void *p;
 
-	p = &regs[modrm_reg];
 	if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
-		p = (unsigned char *)&regs[modrm_reg & 3] + 1;
+		p = (unsigned char *)reg_rmw(ctxt, modrm_reg & 3) + 1;
+	else
+		p = reg_rmw(ctxt, modrm_reg);
 	return p;
 }
 
@@ -858,23 +909,23 @@ static void read_sse_reg(struct x86_emulate_ctxt *ctxt, sse128_t *data, int reg)
 {
 	ctxt->ops->get_fpu(ctxt);
 	switch (reg) {
-	case 0: asm("movdqu %%xmm0, %0" : "=m"(*data)); break;
-	case 1: asm("movdqu %%xmm1, %0" : "=m"(*data)); break;
-	case 2: asm("movdqu %%xmm2, %0" : "=m"(*data)); break;
-	case 3: asm("movdqu %%xmm3, %0" : "=m"(*data)); break;
-	case 4: asm("movdqu %%xmm4, %0" : "=m"(*data)); break;
-	case 5: asm("movdqu %%xmm5, %0" : "=m"(*data)); break;
-	case 6: asm("movdqu %%xmm6, %0" : "=m"(*data)); break;
-	case 7: asm("movdqu %%xmm7, %0" : "=m"(*data)); break;
+	case 0: asm("movdqa %%xmm0, %0" : "=m"(*data)); break;
+	case 1: asm("movdqa %%xmm1, %0" : "=m"(*data)); break;
+	case 2: asm("movdqa %%xmm2, %0" : "=m"(*data)); break;
+	case 3: asm("movdqa %%xmm3, %0" : "=m"(*data)); break;
+	case 4: asm("movdqa %%xmm4, %0" : "=m"(*data)); break;
+	case 5: asm("movdqa %%xmm5, %0" : "=m"(*data)); break;
+	case 6: asm("movdqa %%xmm6, %0" : "=m"(*data)); break;
+	case 7: asm("movdqa %%xmm7, %0" : "=m"(*data)); break;
 #ifdef CONFIG_X86_64
-	case 8: asm("movdqu %%xmm8, %0" : "=m"(*data)); break;
-	case 9: asm("movdqu %%xmm9, %0" : "=m"(*data)); break;
-	case 10: asm("movdqu %%xmm10, %0" : "=m"(*data)); break;
-	case 11: asm("movdqu %%xmm11, %0" : "=m"(*data)); break;
-	case 12: asm("movdqu %%xmm12, %0" : "=m"(*data)); break;
-	case 13: asm("movdqu %%xmm13, %0" : "=m"(*data)); break;
-	case 14: asm("movdqu %%xmm14, %0" : "=m"(*data)); break;
-	case 15: asm("movdqu %%xmm15, %0" : "=m"(*data)); break;
+	case 8: asm("movdqa %%xmm8, %0" : "=m"(*data)); break;
+	case 9: asm("movdqa %%xmm9, %0" : "=m"(*data)); break;
+	case 10: asm("movdqa %%xmm10, %0" : "=m"(*data)); break;
+	case 11: asm("movdqa %%xmm11, %0" : "=m"(*data)); break;
+	case 12: asm("movdqa %%xmm12, %0" : "=m"(*data)); break;
+	case 13: asm("movdqa %%xmm13, %0" : "=m"(*data)); break;
+	case 14: asm("movdqa %%xmm14, %0" : "=m"(*data)); break;
+	case 15: asm("movdqa %%xmm15, %0" : "=m"(*data)); break;
 #endif
 	default: BUG();
 	}
@@ -886,23 +937,23 @@ static void write_sse_reg(struct x86_emulate_ctxt *ctxt, sse128_t *data,
 {
 	ctxt->ops->get_fpu(ctxt);
 	switch (reg) {
-	case 0: asm("movdqu %0, %%xmm0" : : "m"(*data)); break;
-	case 1: asm("movdqu %0, %%xmm1" : : "m"(*data)); break;
-	case 2: asm("movdqu %0, %%xmm2" : : "m"(*data)); break;
-	case 3: asm("movdqu %0, %%xmm3" : : "m"(*data)); break;
-	case 4: asm("movdqu %0, %%xmm4" : : "m"(*data)); break;
-	case 5: asm("movdqu %0, %%xmm5" : : "m"(*data)); break;
-	case 6: asm("movdqu %0, %%xmm6" : : "m"(*data)); break;
-	case 7: asm("movdqu %0, %%xmm7" : : "m"(*data)); break;
+	case 0: asm("movdqa %0, %%xmm0" : : "m"(*data)); break;
+	case 1: asm("movdqa %0, %%xmm1" : : "m"(*data)); break;
+	case 2: asm("movdqa %0, %%xmm2" : : "m"(*data)); break;
+	case 3: asm("movdqa %0, %%xmm3" : : "m"(*data)); break;
+	case 4: asm("movdqa %0, %%xmm4" : : "m"(*data)); break;
+	case 5: asm("movdqa %0, %%xmm5" : : "m"(*data)); break;
+	case 6: asm("movdqa %0, %%xmm6" : : "m"(*data)); break;
+	case 7: asm("movdqa %0, %%xmm7" : : "m"(*data)); break;
 #ifdef CONFIG_X86_64
-	case 8: asm("movdqu %0, %%xmm8" : : "m"(*data)); break;
-	case 9: asm("movdqu %0, %%xmm9" : : "m"(*data)); break;
-	case 10: asm("movdqu %0, %%xmm10" : : "m"(*data)); break;
-	case 11: asm("movdqu %0, %%xmm11" : : "m"(*data)); break;
-	case 12: asm("movdqu %0, %%xmm12" : : "m"(*data)); break;
-	case 13: asm("movdqu %0, %%xmm13" : : "m"(*data)); break;
-	case 14: asm("movdqu %0, %%xmm14" : : "m"(*data)); break;
-	case 15: asm("movdqu %0, %%xmm15" : : "m"(*data)); break;
+	case 8: asm("movdqa %0, %%xmm8" : : "m"(*data)); break;
+	case 9: asm("movdqa %0, %%xmm9" : : "m"(*data)); break;
+	case 10: asm("movdqa %0, %%xmm10" : : "m"(*data)); break;
+	case 11: asm("movdqa %0, %%xmm11" : : "m"(*data)); break;
+	case 12: asm("movdqa %0, %%xmm12" : : "m"(*data)); break;
+	case 13: asm("movdqa %0, %%xmm13" : : "m"(*data)); break;
+	case 14: asm("movdqa %0, %%xmm14" : : "m"(*data)); break;
+	case 15: asm("movdqa %0, %%xmm15" : : "m"(*data)); break;
 #endif
 	default: BUG();
 	}
@@ -969,10 +1020,10 @@ static void decode_register_operand(struct x86_emulate_ctxt *ctxt,
 
 	op->type = OP_REG;
 	if (ctxt->d & ByteOp) {
-		op->addr.reg = decode_register(reg, ctxt->regs, highbyte_regs);
+		op->addr.reg = decode_register(ctxt, reg, highbyte_regs);
 		op->bytes = 1;
 	} else {
-		op->addr.reg = decode_register(reg, ctxt->regs, 0);
+		op->addr.reg = decode_register(ctxt, reg, 0);
 		op->bytes = ctxt->op_bytes;
 	}
 	fetch_register_operand(op);
@@ -1007,8 +1058,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 	if (ctxt->modrm_mod == 3) {
 		op->type = OP_REG;
 		op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
-		op->addr.reg = decode_register(ctxt->modrm_rm,
-					       ctxt->regs, ctxt->d & ByteOp);
+		op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, ctxt->d & ByteOp);
 		if (ctxt->d & Sse) {
 			op->type = OP_XMM;
 			op->bytes = 16;
@@ -1029,10 +1079,10 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 	op->type = OP_MEM;
 
 	if (ctxt->ad_bytes == 2) {
-		unsigned bx = ctxt->regs[VCPU_REGS_RBX];
-		unsigned bp = ctxt->regs[VCPU_REGS_RBP];
-		unsigned si = ctxt->regs[VCPU_REGS_RSI];
-		unsigned di = ctxt->regs[VCPU_REGS_RDI];
+		unsigned bx = reg_read(ctxt, VCPU_REGS_RBX);
+		unsigned bp = reg_read(ctxt, VCPU_REGS_RBP);
+		unsigned si = reg_read(ctxt, VCPU_REGS_RSI);
+		unsigned di = reg_read(ctxt, VCPU_REGS_RDI);
 
 		/* 16-bit ModR/M decode. */
 		switch (ctxt->modrm_mod) {
@@ -1089,17 +1139,17 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 			if ((base_reg & 7) == 5 && ctxt->modrm_mod == 0)
 				modrm_ea += insn_fetch(s32, ctxt);
 			else {
-				modrm_ea += ctxt->regs[base_reg];
+				modrm_ea += reg_read(ctxt, base_reg);
 				adjust_modrm_seg(ctxt, base_reg);
 			}
 			if (index_reg != 4)
-				modrm_ea += ctxt->regs[index_reg] << scale;
+				modrm_ea += reg_read(ctxt, index_reg) << scale;
 		} else if ((ctxt->modrm_rm & 7) == 5 && ctxt->modrm_mod == 0) {
 			if (ctxt->mode == X86EMUL_MODE_PROT64)
 				ctxt->rip_relative = 1;
 		} else {
 			base_reg = ctxt->modrm_rm;
-			modrm_ea += ctxt->regs[base_reg];
+			modrm_ea += reg_read(ctxt, base_reg);
 			adjust_modrm_seg(ctxt, base_reg);
 		}
 		switch (ctxt->modrm_mod) {
@@ -1166,24 +1216,21 @@ static int read_emulated(struct x86_emulate_ctxt *ctxt,
 	int rc;
 	struct read_cache *mc = &ctxt->mem_read;
 
-	while (size) {
-		int n = min(size, 8u);
-		size -= n;
-		if (mc->pos < mc->end)
-			goto read_cached;
+	if (mc->pos < mc->end)
+		goto read_cached;
 
-		rc = ctxt->ops->read_emulated(ctxt, addr, mc->data + mc->end, n,
-					      &ctxt->exception);
-		if (rc != X86EMUL_CONTINUE)
-			return rc;
-		mc->end += n;
+	WARN_ON((mc->end + size) >= sizeof(mc->data));
 
-	read_cached:
-		memcpy(dest, mc->data + mc->pos, n);
-		mc->pos += n;
-		dest += n;
-		addr += n;
-	}
+	rc = ctxt->ops->read_emulated(ctxt, addr, mc->data + mc->end, size,
+				      &ctxt->exception);
+	if (rc != X86EMUL_CONTINUE)
+		return rc;
+
+	mc->end += size;
+
+read_cached:
+	memcpy(dest, mc->data + mc->pos, size);
+	mc->pos += size;
 	return X86EMUL_CONTINUE;
 }
 
@@ -1240,10 +1287,10 @@ static int pio_in_emulated(struct x86_emulate_ctxt *ctxt,
 	if (rc->pos == rc->end) { /* refill pio read ahead */
 		unsigned int in_page, n;
 		unsigned int count = ctxt->rep_prefix ?
-			address_mask(ctxt, ctxt->regs[VCPU_REGS_RCX]) : 1;
+			address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) : 1;
 		in_page = (ctxt->eflags & EFLG_DF) ?
-			offset_in_page(ctxt->regs[VCPU_REGS_RDI]) :
-			PAGE_SIZE - offset_in_page(ctxt->regs[VCPU_REGS_RDI]);
+			offset_in_page(reg_read(ctxt, VCPU_REGS_RDI)) :
+			PAGE_SIZE - offset_in_page(reg_read(ctxt, VCPU_REGS_RDI));
 		n = min(min(in_page, (unsigned int)sizeof(rc->data)) / size,
 			count);
 		if (n == 0)
@@ -1254,8 +1301,15 @@ static int pio_in_emulated(struct x86_emulate_ctxt *ctxt,
 		rc->end = n * size;
 	}
 
-	memcpy(dest, rc->data + rc->pos, size);
-	rc->pos += size;
+	if (ctxt->rep_prefix && !(ctxt->eflags & EFLG_DF)) {
+		ctxt->dst.data = rc->data + rc->pos;
+		ctxt->dst.type = OP_MEM_STR;
+		ctxt->dst.count = (rc->end - rc->pos) / size;
+		rc->pos = rc->end;
+	} else {
+		memcpy(dest, rc->data + rc->pos, size);
+		rc->pos += size;
+	}
 	return 1;
 }
 
@@ -1278,7 +1332,7 @@ static int read_interrupt_descriptor(struct x86_emulate_ctxt *ctxt,
 static void get_descriptor_table_ptr(struct x86_emulate_ctxt *ctxt,
 				     u16 selector, struct desc_ptr *dt)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 
 	if (selector & 1 << 2) {
 		struct desc_struct desc;
@@ -1342,19 +1396,15 @@ static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 	bool null_selector = !(selector & ~0x3); /* 0000-0003 are null */
 	ulong desc_addr;
 	int ret;
+	u16 dummy;
 
 	memset(&seg_desc, 0, sizeof seg_desc);
 
 	if ((seg <= VCPU_SREG_GS && ctxt->mode == X86EMUL_MODE_VM86)
 	    || ctxt->mode == X86EMUL_MODE_REAL) {
 		/* set real mode segment descriptor */
+		ctxt->ops->get_segment(ctxt, &dummy, &seg_desc, NULL, seg);
 		set_desc_base(&seg_desc, selector << 4);
-		set_desc_limit(&seg_desc, 0xffff);
-		seg_desc.type = 3;
-		seg_desc.p = 1;
-		seg_desc.s = 1;
-		if (ctxt->mode == X86EMUL_MODE_VM86)
-			seg_desc.dpl = 3;
 		goto load;
 	}
 
@@ -1383,7 +1433,7 @@ static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 	err_code = selector & 0xfffc;
 	err_vec = GP_VECTOR;
 
-	/* can't load system descriptor into segment selecor */
+	/* can't load system descriptor into segment selector */
 	if (seg <= VCPU_SREG_GS && !seg_desc.s)
 		goto exception;
 
@@ -1503,6 +1553,14 @@ static int writeback(struct x86_emulate_ctxt *ctxt)
 		if (rc != X86EMUL_CONTINUE)
 			return rc;
 		break;
+	case OP_MEM_STR:
+		rc = segmented_write(ctxt,
+				ctxt->dst.addr.mem,
+				ctxt->dst.data,
+				ctxt->dst.bytes * ctxt->dst.count);
+		if (rc != X86EMUL_CONTINUE)
+			return rc;
+		break;
 	case OP_XMM:
 		write_sse_reg(ctxt, &ctxt->dst.vec_val, ctxt->dst.addr.xmm);
 		break;
@@ -1522,8 +1580,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes)
 {
 	struct segmented_address addr;
 
-	register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes);
-	addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]);
+	rsp_increment(ctxt, -bytes);
+	addr.ea = reg_read(ctxt, VCPU_REGS_RSP) & stack_mask(ctxt);
 	addr.seg = VCPU_SREG_SS;
 
 	return segmented_write(ctxt, addr, data, bytes);
@@ -1542,13 +1600,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt,
 	int rc;
 	struct segmented_address addr;
 
-	addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]);
+	addr.ea = reg_read(ctxt, VCPU_REGS_RSP) & stack_mask(ctxt);
 	addr.seg = VCPU_SREG_SS;
 	rc = segmented_read(ctxt, addr, dest, len);
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
-	register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len);
+	rsp_increment(ctxt, len);
 	return rc;
 }
 
@@ -1610,26 +1668,28 @@ static int em_enter(struct x86_emulate_ctxt *ctxt)
 	int rc;
 	unsigned frame_size = ctxt->src.val;
 	unsigned nesting_level = ctxt->src2.val & 31;
+	ulong rbp;
 
 	if (nesting_level)
 		return X86EMUL_UNHANDLEABLE;
 
-	rc = push(ctxt, &ctxt->regs[VCPU_REGS_RBP], stack_size(ctxt));
+	rbp = reg_read(ctxt, VCPU_REGS_RBP);
+	rc = push(ctxt, &rbp, stack_size(ctxt));
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
-	assign_masked(&ctxt->regs[VCPU_REGS_RBP], ctxt->regs[VCPU_REGS_RSP],
+	assign_masked(reg_rmw(ctxt, VCPU_REGS_RBP), reg_read(ctxt, VCPU_REGS_RSP),
 		      stack_mask(ctxt));
-	assign_masked(&ctxt->regs[VCPU_REGS_RSP],
-		      ctxt->regs[VCPU_REGS_RSP] - frame_size,
+	assign_masked(reg_rmw(ctxt, VCPU_REGS_RSP),
+		      reg_read(ctxt, VCPU_REGS_RSP) - frame_size,
 		      stack_mask(ctxt));
 	return X86EMUL_CONTINUE;
 }
 
 static int em_leave(struct x86_emulate_ctxt *ctxt)
 {
-	assign_masked(&ctxt->regs[VCPU_REGS_RSP], ctxt->regs[VCPU_REGS_RBP],
+	assign_masked(reg_rmw(ctxt, VCPU_REGS_RSP), reg_read(ctxt, VCPU_REGS_RBP),
 		      stack_mask(ctxt));
-	return emulate_pop(ctxt, &ctxt->regs[VCPU_REGS_RBP], ctxt->op_bytes);
+	return emulate_pop(ctxt, reg_rmw(ctxt, VCPU_REGS_RBP), ctxt->op_bytes);
 }
 
 static int em_push_sreg(struct x86_emulate_ctxt *ctxt)
@@ -1657,13 +1717,13 @@ static int em_pop_sreg(struct x86_emulate_ctxt *ctxt)
 
 static int em_pusha(struct x86_emulate_ctxt *ctxt)
 {
-	unsigned long old_esp = ctxt->regs[VCPU_REGS_RSP];
+	unsigned long old_esp = reg_read(ctxt, VCPU_REGS_RSP);
 	int rc = X86EMUL_CONTINUE;
 	int reg = VCPU_REGS_RAX;
 
 	while (reg <= VCPU_REGS_RDI) {
 		(reg == VCPU_REGS_RSP) ?
-		(ctxt->src.val = old_esp) : (ctxt->src.val = ctxt->regs[reg]);
+		(ctxt->src.val = old_esp) : (ctxt->src.val = reg_read(ctxt, reg));
 
 		rc = em_push(ctxt);
 		if (rc != X86EMUL_CONTINUE)
@@ -1688,12 +1748,11 @@ static int em_popa(struct x86_emulate_ctxt *ctxt)
 
 	while (reg >= VCPU_REGS_RAX) {
 		if (reg == VCPU_REGS_RSP) {
-			register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP],
-							ctxt->op_bytes);
+			rsp_increment(ctxt, ctxt->op_bytes);
 			--reg;
 		}
 
-		rc = emulate_pop(ctxt, &ctxt->regs[reg], ctxt->op_bytes);
+		rc = emulate_pop(ctxt, reg_rmw(ctxt, reg), ctxt->op_bytes);
 		if (rc != X86EMUL_CONTINUE)
 			break;
 		--reg;
@@ -1701,9 +1760,9 @@ static int em_popa(struct x86_emulate_ctxt *ctxt)
 	return rc;
 }
 
-int emulate_int_real(struct x86_emulate_ctxt *ctxt, int irq)
+static int __emulate_int_real(struct x86_emulate_ctxt *ctxt, int irq)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	int rc;
 	struct desc_ptr dt;
 	gva_t cs_addr;
@@ -1750,11 +1809,22 @@ int emulate_int_real(struct x86_emulate_ctxt *ctxt, int irq)
 	return rc;
 }
 
+int emulate_int_real(struct x86_emulate_ctxt *ctxt, int irq)
+{
+	int rc;
+
+	invalidate_registers(ctxt);
+	rc = __emulate_int_real(ctxt, irq);
+	if (rc == X86EMUL_CONTINUE)
+		writeback_registers(ctxt);
+	return rc;
+}
+
 static int emulate_int(struct x86_emulate_ctxt *ctxt, int irq)
 {
 	switch(ctxt->mode) {
 	case X86EMUL_MODE_REAL:
-		return emulate_int_real(ctxt, irq);
+		return __emulate_int_real(ctxt, irq);
 	case X86EMUL_MODE_VM86:
 	case X86EMUL_MODE_PROT16:
 	case X86EMUL_MODE_PROT32:
@@ -1961,14 +2031,14 @@ static int em_cmpxchg8b(struct x86_emulate_ctxt *ctxt)
 {
 	u64 old = ctxt->dst.orig_val64;
 
-	if (((u32) (old >> 0) != (u32) ctxt->regs[VCPU_REGS_RAX]) ||
-	    ((u32) (old >> 32) != (u32) ctxt->regs[VCPU_REGS_RDX])) {
-		ctxt->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
-		ctxt->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
+	if (((u32) (old >> 0) != (u32) reg_read(ctxt, VCPU_REGS_RAX)) ||
+	    ((u32) (old >> 32) != (u32) reg_read(ctxt, VCPU_REGS_RDX))) {
+		*reg_write(ctxt, VCPU_REGS_RAX) = (u32) (old >> 0);
+		*reg_write(ctxt, VCPU_REGS_RDX) = (u32) (old >> 32);
 		ctxt->eflags &= ~EFLG_ZF;
 	} else {
-		ctxt->dst.val64 = ((u64)ctxt->regs[VCPU_REGS_RCX] << 32) |
-			(u32) ctxt->regs[VCPU_REGS_RBX];
+		ctxt->dst.val64 = ((u64)reg_read(ctxt, VCPU_REGS_RCX) << 32) |
+			(u32) reg_read(ctxt, VCPU_REGS_RBX);
 
 		ctxt->eflags |= EFLG_ZF;
 	}
@@ -2004,7 +2074,7 @@ static int em_cmpxchg(struct x86_emulate_ctxt *ctxt)
 {
 	/* Save real source value, then compare EAX against destination. */
 	ctxt->src.orig_val = ctxt->src.val;
-	ctxt->src.val = ctxt->regs[VCPU_REGS_RAX];
+	ctxt->src.val = reg_read(ctxt, VCPU_REGS_RAX);
 	emulate_2op_SrcV(ctxt, "cmp");
 
 	if (ctxt->eflags & EFLG_ZF) {
@@ -2013,7 +2083,7 @@ static int em_cmpxchg(struct x86_emulate_ctxt *ctxt)
 	} else {
 		/* Failure: write the value we saw to EAX. */
 		ctxt->dst.type = OP_REG;
-		ctxt->dst.addr.reg = (unsigned long *)&ctxt->regs[VCPU_REGS_RAX];
+		ctxt->dst.addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
 	}
 	return X86EMUL_CONTINUE;
 }
@@ -2038,12 +2108,6 @@ static void
 setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
 			struct desc_struct *cs, struct desc_struct *ss)
 {
-	u16 selector;
-
-	memset(cs, 0, sizeof(struct desc_struct));
-	ctxt->ops->get_segment(ctxt, &selector, cs, NULL, VCPU_SREG_CS);
-	memset(ss, 0, sizeof(struct desc_struct));
-
 	cs->l = 0;		/* will be adjusted later */
 	set_desc_base(cs, 0);	/* flat segment */
 	cs->g = 1;		/* 4kb granularity */
@@ -2053,6 +2117,7 @@ setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
 	cs->dpl = 0;		/* will be adjusted later */
 	cs->p = 1;
 	cs->d = 1;
+	cs->avl = 0;
 
 	set_desc_base(ss, 0);	/* flat segment */
 	set_desc_limit(ss, 0xfffff);	/* 4GB limit */
@@ -2062,6 +2127,8 @@ setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
 	ss->d = 1;		/* 32bit stack segment */
 	ss->dpl = 0;
 	ss->p = 1;
+	ss->l = 0;
+	ss->avl = 0;
 }
 
 static bool vendor_intel(struct x86_emulate_ctxt *ctxt)
@@ -2077,7 +2144,7 @@ static bool vendor_intel(struct x86_emulate_ctxt *ctxt)
 
 static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	u32 eax, ebx, ecx, edx;
 
 	/*
@@ -2121,7 +2188,7 @@ static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt)
 
 static int em_syscall(struct x86_emulate_ctxt *ctxt)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct desc_struct cs, ss;
 	u64 msr_data;
 	u16 cs_sel, ss_sel;
@@ -2153,10 +2220,10 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt)
 	ops->set_segment(ctxt, cs_sel, &cs, 0, VCPU_SREG_CS);
 	ops->set_segment(ctxt, ss_sel, &ss, 0, VCPU_SREG_SS);
 
-	ctxt->regs[VCPU_REGS_RCX] = ctxt->_eip;
+	*reg_write(ctxt, VCPU_REGS_RCX) = ctxt->_eip;
 	if (efer & EFER_LMA) {
 #ifdef CONFIG_X86_64
-		ctxt->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
+		*reg_write(ctxt, VCPU_REGS_R11) = ctxt->eflags & ~EFLG_RF;
 
 		ops->get_msr(ctxt,
 			     ctxt->mode == X86EMUL_MODE_PROT64 ?
@@ -2179,7 +2246,7 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt)
 
 static int em_sysenter(struct x86_emulate_ctxt *ctxt)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct desc_struct cs, ss;
 	u64 msr_data;
 	u16 cs_sel, ss_sel;
@@ -2216,6 +2283,8 @@ static int em_sysenter(struct x86_emulate_ctxt *ctxt)
 		if (msr_data == 0x0)
 			return emulate_gp(ctxt, 0);
 		break;
+	default:
+		break;
 	}
 
 	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
@@ -2235,14 +2304,14 @@ static int em_sysenter(struct x86_emulate_ctxt *ctxt)
 	ctxt->_eip = msr_data;
 
 	ops->get_msr(ctxt, MSR_IA32_SYSENTER_ESP, &msr_data);
-	ctxt->regs[VCPU_REGS_RSP] = msr_data;
+	*reg_write(ctxt, VCPU_REGS_RSP) = msr_data;
 
 	return X86EMUL_CONTINUE;
 }
 
 static int em_sysexit(struct x86_emulate_ctxt *ctxt)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct desc_struct cs, ss;
 	u64 msr_data;
 	int usermode;
@@ -2285,8 +2354,8 @@ static int em_sysexit(struct x86_emulate_ctxt *ctxt)
 	ops->set_segment(ctxt, cs_sel, &cs, 0, VCPU_SREG_CS);
 	ops->set_segment(ctxt, ss_sel, &ss, 0, VCPU_SREG_SS);
 
-	ctxt->_eip = ctxt->regs[VCPU_REGS_RDX];
-	ctxt->regs[VCPU_REGS_RSP] = ctxt->regs[VCPU_REGS_RCX];
+	ctxt->_eip = reg_read(ctxt, VCPU_REGS_RDX);
+	*reg_write(ctxt, VCPU_REGS_RSP) = reg_read(ctxt, VCPU_REGS_RCX);
 
 	return X86EMUL_CONTINUE;
 }
@@ -2305,7 +2374,7 @@ static bool emulator_bad_iopl(struct x86_emulate_ctxt *ctxt)
 static bool emulator_io_port_access_allowed(struct x86_emulate_ctxt *ctxt,
 					    u16 port, u16 len)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct desc_struct tr_seg;
 	u32 base3;
 	int r;
@@ -2355,14 +2424,14 @@ static void save_state_to_tss16(struct x86_emulate_ctxt *ctxt,
 {
 	tss->ip = ctxt->_eip;
 	tss->flag = ctxt->eflags;
-	tss->ax = ctxt->regs[VCPU_REGS_RAX];
-	tss->cx = ctxt->regs[VCPU_REGS_RCX];
-	tss->dx = ctxt->regs[VCPU_REGS_RDX];
-	tss->bx = ctxt->regs[VCPU_REGS_RBX];
-	tss->sp = ctxt->regs[VCPU_REGS_RSP];
-	tss->bp = ctxt->regs[VCPU_REGS_RBP];
-	tss->si = ctxt->regs[VCPU_REGS_RSI];
-	tss->di = ctxt->regs[VCPU_REGS_RDI];
+	tss->ax = reg_read(ctxt, VCPU_REGS_RAX);
+	tss->cx = reg_read(ctxt, VCPU_REGS_RCX);
+	tss->dx = reg_read(ctxt, VCPU_REGS_RDX);
+	tss->bx = reg_read(ctxt, VCPU_REGS_RBX);
+	tss->sp = reg_read(ctxt, VCPU_REGS_RSP);
+	tss->bp = reg_read(ctxt, VCPU_REGS_RBP);
+	tss->si = reg_read(ctxt, VCPU_REGS_RSI);
+	tss->di = reg_read(ctxt, VCPU_REGS_RDI);
 
 	tss->es = get_segment_selector(ctxt, VCPU_SREG_ES);
 	tss->cs = get_segment_selector(ctxt, VCPU_SREG_CS);
@@ -2378,14 +2447,14 @@ static int load_state_from_tss16(struct x86_emulate_ctxt *ctxt,
 
 	ctxt->_eip = tss->ip;
 	ctxt->eflags = tss->flag | 2;
-	ctxt->regs[VCPU_REGS_RAX] = tss->ax;
-	ctxt->regs[VCPU_REGS_RCX] = tss->cx;
-	ctxt->regs[VCPU_REGS_RDX] = tss->dx;
-	ctxt->regs[VCPU_REGS_RBX] = tss->bx;
-	ctxt->regs[VCPU_REGS_RSP] = tss->sp;
-	ctxt->regs[VCPU_REGS_RBP] = tss->bp;
-	ctxt->regs[VCPU_REGS_RSI] = tss->si;
-	ctxt->regs[VCPU_REGS_RDI] = tss->di;
+	*reg_write(ctxt, VCPU_REGS_RAX) = tss->ax;
+	*reg_write(ctxt, VCPU_REGS_RCX) = tss->cx;
+	*reg_write(ctxt, VCPU_REGS_RDX) = tss->dx;
+	*reg_write(ctxt, VCPU_REGS_RBX) = tss->bx;
+	*reg_write(ctxt, VCPU_REGS_RSP) = tss->sp;
+	*reg_write(ctxt, VCPU_REGS_RBP) = tss->bp;
+	*reg_write(ctxt, VCPU_REGS_RSI) = tss->si;
+	*reg_write(ctxt, VCPU_REGS_RDI) = tss->di;
 
 	/*
 	 * SDM says that segment selectors are loaded before segment
@@ -2398,7 +2467,7 @@ static int load_state_from_tss16(struct x86_emulate_ctxt *ctxt,
 	set_segment_selector(ctxt, tss->ds, VCPU_SREG_DS);
 
 	/*
-	 * Now load segment descriptors. If fault happenes at this stage
+	 * Now load segment descriptors. If fault happens at this stage
 	 * it is handled in a context of new task
 	 */
 	ret = load_segment_descriptor(ctxt, tss->ldt, VCPU_SREG_LDTR);
@@ -2424,7 +2493,7 @@ static int task_switch_16(struct x86_emulate_ctxt *ctxt,
 			  u16 tss_selector, u16 old_tss_sel,
 			  ulong old_tss_base, struct desc_struct *new_desc)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct tss_segment_16 tss_seg;
 	int ret;
 	u32 new_tss_base = get_desc_base(new_desc);
@@ -2470,14 +2539,14 @@ static void save_state_to_tss32(struct x86_emulate_ctxt *ctxt,
 	tss->cr3 = ctxt->ops->get_cr(ctxt, 3);
 	tss->eip = ctxt->_eip;
 	tss->eflags = ctxt->eflags;
-	tss->eax = ctxt->regs[VCPU_REGS_RAX];
-	tss->ecx = ctxt->regs[VCPU_REGS_RCX];
-	tss->edx = ctxt->regs[VCPU_REGS_RDX];
-	tss->ebx = ctxt->regs[VCPU_REGS_RBX];
-	tss->esp = ctxt->regs[VCPU_REGS_RSP];
-	tss->ebp = ctxt->regs[VCPU_REGS_RBP];
-	tss->esi = ctxt->regs[VCPU_REGS_RSI];
-	tss->edi = ctxt->regs[VCPU_REGS_RDI];
+	tss->eax = reg_read(ctxt, VCPU_REGS_RAX);
+	tss->ecx = reg_read(ctxt, VCPU_REGS_RCX);
+	tss->edx = reg_read(ctxt, VCPU_REGS_RDX);
+	tss->ebx = reg_read(ctxt, VCPU_REGS_RBX);
+	tss->esp = reg_read(ctxt, VCPU_REGS_RSP);
+	tss->ebp = reg_read(ctxt, VCPU_REGS_RBP);
+	tss->esi = reg_read(ctxt, VCPU_REGS_RSI);
+	tss->edi = reg_read(ctxt, VCPU_REGS_RDI);
 
 	tss->es = get_segment_selector(ctxt, VCPU_SREG_ES);
 	tss->cs = get_segment_selector(ctxt, VCPU_SREG_CS);
@@ -2499,14 +2568,14 @@ static int load_state_from_tss32(struct x86_emulate_ctxt *ctxt,
 	ctxt->eflags = tss->eflags | 2;
 
 	/* General purpose registers */
-	ctxt->regs[VCPU_REGS_RAX] = tss->eax;
-	ctxt->regs[VCPU_REGS_RCX] = tss->ecx;
-	ctxt->regs[VCPU_REGS_RDX] = tss->edx;
-	ctxt->regs[VCPU_REGS_RBX] = tss->ebx;
-	ctxt->regs[VCPU_REGS_RSP] = tss->esp;
-	ctxt->regs[VCPU_REGS_RBP] = tss->ebp;
-	ctxt->regs[VCPU_REGS_RSI] = tss->esi;
-	ctxt->regs[VCPU_REGS_RDI] = tss->edi;
+	*reg_write(ctxt, VCPU_REGS_RAX) = tss->eax;
+	*reg_write(ctxt, VCPU_REGS_RCX) = tss->ecx;
+	*reg_write(ctxt, VCPU_REGS_RDX) = tss->edx;
+	*reg_write(ctxt, VCPU_REGS_RBX) = tss->ebx;
+	*reg_write(ctxt, VCPU_REGS_RSP) = tss->esp;
+	*reg_write(ctxt, VCPU_REGS_RBP) = tss->ebp;
+	*reg_write(ctxt, VCPU_REGS_RSI) = tss->esi;
+	*reg_write(ctxt, VCPU_REGS_RDI) = tss->edi;
 
 	/*
 	 * SDM says that segment selectors are loaded before segment
@@ -2571,7 +2640,7 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt,
 			  u16 tss_selector, u16 old_tss_sel,
 			  ulong old_tss_base, struct desc_struct *new_desc)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct tss_segment_32 tss_seg;
 	int ret;
 	u32 new_tss_base = get_desc_base(new_desc);
@@ -2615,7 +2684,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 				   u16 tss_selector, int idt_index, int reason,
 				   bool has_error_code, u32 error_code)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	struct desc_struct curr_tss_desc, next_tss_desc;
 	int ret;
 	u16 old_tss_sel = get_segment_selector(ctxt, VCPU_SREG_TR);
@@ -2640,7 +2709,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 	 *
 	 * 1. jmp/call/int to task gate: Check against DPL of the task gate
 	 * 2. Exception/IRQ/iret: No check is performed
-	 * 3. jmp/call to TSS: Check agains DPL of the TSS
+	 * 3. jmp/call to TSS: Check against DPL of the TSS
 	 */
 	if (reason == TASK_SWITCH_GATE) {
 		if (idt_index != -1) {
@@ -2681,7 +2750,7 @@ static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
 		ctxt->eflags = ctxt->eflags & ~X86_EFLAGS_NT;
 
 	/* set back link to prev task only if NT bit is set in eflags
-	   note that old_tss_sel is not used afetr this point */
+	   note that old_tss_sel is not used after this point */
 	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
 		old_tss_sel = 0xffff;
 
@@ -2721,26 +2790,28 @@ int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
 {
 	int rc;
 
+	invalidate_registers(ctxt);
 	ctxt->_eip = ctxt->eip;
 	ctxt->dst.type = OP_NONE;
 
 	rc = emulator_do_task_switch(ctxt, tss_selector, idt_index, reason,
 				     has_error_code, error_code);
 
-	if (rc == X86EMUL_CONTINUE)
+	if (rc == X86EMUL_CONTINUE) {
 		ctxt->eip = ctxt->_eip;
+		writeback_registers(ctxt);
+	}
 
 	return (rc == X86EMUL_UNHANDLEABLE) ? EMULATION_FAILED : EMULATION_OK;
 }
 
-static void string_addr_inc(struct x86_emulate_ctxt *ctxt, unsigned seg,
-			    int reg, struct operand *op)
+static void string_addr_inc(struct x86_emulate_ctxt *ctxt, int reg,
+		struct operand *op)
 {
-	int df = (ctxt->eflags & EFLG_DF) ? -1 : 1;
+	int df = (ctxt->eflags & EFLG_DF) ? -op->count : op->count;
 
-	register_address_increment(ctxt, &ctxt->regs[reg], df * op->bytes);
-	op->addr.mem.ea = register_address(ctxt, ctxt->regs[reg]);
-	op->addr.mem.seg = seg;
+	register_address_increment(ctxt, reg_rmw(ctxt, reg), df * op->bytes);
+	op->addr.mem.ea = register_address(ctxt, reg_read(ctxt, reg));
 }
 
 static int em_das(struct x86_emulate_ctxt *ctxt)
@@ -2825,7 +2896,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt)
 	rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes);
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
-	register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val);
+	rsp_increment(ctxt, ctxt->src.val);
 	return X86EMUL_CONTINUE;
 }
 
@@ -2915,7 +2986,7 @@ static int em_cwd(struct x86_emulate_ctxt *ctxt)
 {
 	ctxt->dst.type = OP_REG;
 	ctxt->dst.bytes = ctxt->src.bytes;
-	ctxt->dst.addr.reg = &ctxt->regs[VCPU_REGS_RDX];
+	ctxt->dst.addr.reg = reg_rmw(ctxt, VCPU_REGS_RDX);
 	ctxt->dst.val = ~((ctxt->src.val >> (ctxt->src.bytes * 8 - 1)) - 1);
 
 	return X86EMUL_CONTINUE;
@@ -2926,8 +2997,8 @@ static int em_rdtsc(struct x86_emulate_ctxt *ctxt)
 	u64 tsc = 0;
 
 	ctxt->ops->get_msr(ctxt, MSR_IA32_TSC, &tsc);
-	ctxt->regs[VCPU_REGS_RAX] = (u32)tsc;
-	ctxt->regs[VCPU_REGS_RDX] = tsc >> 32;
+	*reg_write(ctxt, VCPU_REGS_RAX) = (u32)tsc;
+	*reg_write(ctxt, VCPU_REGS_RDX) = tsc >> 32;
 	return X86EMUL_CONTINUE;
 }
 
@@ -2935,10 +3006,10 @@ static int em_rdpmc(struct x86_emulate_ctxt *ctxt)
 {
 	u64 pmc;
 
-	if (ctxt->ops->read_pmc(ctxt, ctxt->regs[VCPU_REGS_RCX], &pmc))
+	if (ctxt->ops->read_pmc(ctxt, reg_read(ctxt, VCPU_REGS_RCX), &pmc))
 		return emulate_gp(ctxt, 0);
-	ctxt->regs[VCPU_REGS_RAX] = (u32)pmc;
-	ctxt->regs[VCPU_REGS_RDX] = pmc >> 32;
+	*reg_write(ctxt, VCPU_REGS_RAX) = (u32)pmc;
+	*reg_write(ctxt, VCPU_REGS_RDX) = pmc >> 32;
 	return X86EMUL_CONTINUE;
 }
 
@@ -2980,9 +3051,9 @@ static int em_wrmsr(struct x86_emulate_ctxt *ctxt)
 {
 	u64 msr_data;
 
-	msr_data = (u32)ctxt->regs[VCPU_REGS_RAX]
-		| ((u64)ctxt->regs[VCPU_REGS_RDX] << 32);
-	if (ctxt->ops->set_msr(ctxt, ctxt->regs[VCPU_REGS_RCX], msr_data))
+	msr_data = (u32)reg_read(ctxt, VCPU_REGS_RAX)
+		| ((u64)reg_read(ctxt, VCPU_REGS_RDX) << 32);
+	if (ctxt->ops->set_msr(ctxt, reg_read(ctxt, VCPU_REGS_RCX), msr_data))
 		return emulate_gp(ctxt, 0);
 
 	return X86EMUL_CONTINUE;
@@ -2992,11 +3063,11 @@ static int em_rdmsr(struct x86_emulate_ctxt *ctxt)
 {
 	u64 msr_data;
 
-	if (ctxt->ops->get_msr(ctxt, ctxt->regs[VCPU_REGS_RCX], &msr_data))
+	if (ctxt->ops->get_msr(ctxt, reg_read(ctxt, VCPU_REGS_RCX), &msr_data))
 		return emulate_gp(ctxt, 0);
 
-	ctxt->regs[VCPU_REGS_RAX] = (u32)msr_data;
-	ctxt->regs[VCPU_REGS_RDX] = msr_data >> 32;
+	*reg_write(ctxt, VCPU_REGS_RAX) = (u32)msr_data;
+	*reg_write(ctxt, VCPU_REGS_RDX) = msr_data >> 32;
 	return X86EMUL_CONTINUE;
 }
 
@@ -3176,8 +3247,8 @@ static int em_lmsw(struct x86_emulate_ctxt *ctxt)
 
 static int em_loop(struct x86_emulate_ctxt *ctxt)
 {
-	register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RCX], -1);
-	if ((address_mask(ctxt, ctxt->regs[VCPU_REGS_RCX]) != 0) &&
+	register_address_increment(ctxt, reg_rmw(ctxt, VCPU_REGS_RCX), -1);
+	if ((address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) != 0) &&
 	    (ctxt->b == 0xe2 || test_cc(ctxt->b ^ 0x5, ctxt->eflags)))
 		jmp_rel(ctxt, ctxt->src.val);
 
@@ -3186,7 +3257,7 @@ static int em_loop(struct x86_emulate_ctxt *ctxt)
 
 static int em_jcxz(struct x86_emulate_ctxt *ctxt)
 {
-	if (address_mask(ctxt, ctxt->regs[VCPU_REGS_RCX]) == 0)
+	if (address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) == 0)
 		jmp_rel(ctxt, ctxt->src.val);
 
 	return X86EMUL_CONTINUE;
@@ -3274,20 +3345,20 @@ static int em_cpuid(struct x86_emulate_ctxt *ctxt)
 {
 	u32 eax, ebx, ecx, edx;
 
-	eax = ctxt->regs[VCPU_REGS_RAX];
-	ecx = ctxt->regs[VCPU_REGS_RCX];
+	eax = reg_read(ctxt, VCPU_REGS_RAX);
+	ecx = reg_read(ctxt, VCPU_REGS_RCX);
 	ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx);
-	ctxt->regs[VCPU_REGS_RAX] = eax;
-	ctxt->regs[VCPU_REGS_RBX] = ebx;
-	ctxt->regs[VCPU_REGS_RCX] = ecx;
-	ctxt->regs[VCPU_REGS_RDX] = edx;
+	*reg_write(ctxt, VCPU_REGS_RAX) = eax;
+	*reg_write(ctxt, VCPU_REGS_RBX) = ebx;
+	*reg_write(ctxt, VCPU_REGS_RCX) = ecx;
+	*reg_write(ctxt, VCPU_REGS_RDX) = edx;
 	return X86EMUL_CONTINUE;
 }
 
 static int em_lahf(struct x86_emulate_ctxt *ctxt)
 {
-	ctxt->regs[VCPU_REGS_RAX] &= ~0xff00UL;
-	ctxt->regs[VCPU_REGS_RAX] |= (ctxt->eflags & 0xff) << 8;
+	*reg_rmw(ctxt, VCPU_REGS_RAX) &= ~0xff00UL;
+	*reg_rmw(ctxt, VCPU_REGS_RAX) |= (ctxt->eflags & 0xff) << 8;
 	return X86EMUL_CONTINUE;
 }
 
@@ -3444,7 +3515,7 @@ static int check_svme(struct x86_emulate_ctxt *ctxt)
 
 static int check_svme_pa(struct x86_emulate_ctxt *ctxt)
 {
-	u64 rax = ctxt->regs[VCPU_REGS_RAX];
+	u64 rax = reg_read(ctxt, VCPU_REGS_RAX);
 
 	/* Valid physical address? */
 	if (rax & 0xffff000000000000ULL)
@@ -3466,7 +3537,7 @@ static int check_rdtsc(struct x86_emulate_ctxt *ctxt)
 static int check_rdpmc(struct x86_emulate_ctxt *ctxt)
 {
 	u64 cr4 = ctxt->ops->get_cr(ctxt, 4);
-	u64 rcx = ctxt->regs[VCPU_REGS_RCX];
+	u64 rcx = reg_read(ctxt, VCPU_REGS_RCX);
 
 	if ((!(cr4 & X86_CR4_PCE) && ctxt->ops->cpl(ctxt)) ||
 	    (rcx > 3))
@@ -3519,13 +3590,13 @@ static int check_perm_out(struct x86_emulate_ctxt *ctxt)
 		I2bv(((_f) | DstReg | SrcMem | ModRM) & ~Lock, _e),	\
 		I2bv(((_f) & ~Lock) | DstAcc | SrcImm, _e)
 
-static struct opcode group7_rm1[] = {
+static const struct opcode group7_rm1[] = {
 	DI(SrcNone | Priv, monitor),
 	DI(SrcNone | Priv, mwait),
 	N, N, N, N, N, N,
 };
 
-static struct opcode group7_rm3[] = {
+static const struct opcode group7_rm3[] = {
 	DIP(SrcNone | Prot | Priv,		vmrun,		check_svme_pa),
 	II(SrcNone  | Prot | VendorSpecific,	em_vmmcall,	vmmcall),
 	DIP(SrcNone | Prot | Priv,		vmload,		check_svme_pa),
@@ -3536,13 +3607,13 @@ static struct opcode group7_rm3[] = {
 	DIP(SrcNone | Prot | Priv,		invlpga,	check_svme),
 };
 
-static struct opcode group7_rm7[] = {
+static const struct opcode group7_rm7[] = {
 	N,
 	DIP(SrcNone, rdtscp, check_rdtsc),
 	N, N, N, N, N, N,
 };
 
-static struct opcode group1[] = {
+static const struct opcode group1[] = {
 	I(Lock, em_add),
 	I(Lock | PageTable, em_or),
 	I(Lock, em_adc),
@@ -3553,11 +3624,11 @@ static struct opcode group1[] = {
 	I(0, em_cmp),
 };
 
-static struct opcode group1A[] = {
+static const struct opcode group1A[] = {
 	I(DstMem | SrcNone | Mov | Stack, em_pop), N, N, N, N, N, N, N,
 };
 
-static struct opcode group3[] = {
+static const struct opcode group3[] = {
 	I(DstMem | SrcImm, em_test),
 	I(DstMem | SrcImm, em_test),
 	I(DstMem | SrcNone | Lock, em_not),
@@ -3568,13 +3639,13 @@ static struct opcode group3[] = {
 	I(SrcMem, em_idiv_ex),
 };
 
-static struct opcode group4[] = {
+static const struct opcode group4[] = {
 	I(ByteOp | DstMem | SrcNone | Lock, em_grp45),
 	I(ByteOp | DstMem | SrcNone | Lock, em_grp45),
 	N, N, N, N, N, N,
 };
 
-static struct opcode group5[] = {
+static const struct opcode group5[] = {
 	I(DstMem | SrcNone | Lock,		em_grp45),
 	I(DstMem | SrcNone | Lock,		em_grp45),
 	I(SrcMem | Stack,			em_grp45),
@@ -3584,7 +3655,7 @@ static struct opcode group5[] = {
 	I(SrcMem | Stack,			em_grp45), N,
 };
 
-static struct opcode group6[] = {
+static const struct opcode group6[] = {
 	DI(Prot,	sldt),
 	DI(Prot,	str),
 	II(Prot | Priv | SrcMem16, em_lldt, lldt),
@@ -3592,7 +3663,7 @@ static struct opcode group6[] = {
 	N, N, N, N,
 };
 
-static struct group_dual group7 = { {
+static const struct group_dual group7 = { {
 	II(Mov | DstMem | Priv,			em_sgdt, sgdt),
 	II(Mov | DstMem | Priv,			em_sidt, sidt),
 	II(SrcMem | Priv,			em_lgdt, lgdt),
@@ -3609,7 +3680,7 @@ static struct group_dual group7 = { {
 	EXT(0, group7_rm7),
 } };
 
-static struct opcode group8[] = {
+static const struct opcode group8[] = {
 	N, N, N, N,
 	I(DstMem | SrcImmByte,				em_bt),
 	I(DstMem | SrcImmByte | Lock | PageTable,	em_bts),
@@ -3617,26 +3688,26 @@ static struct opcode group8[] = {
 	I(DstMem | SrcImmByte | Lock | PageTable,	em_btc),
 };
 
-static struct group_dual group9 = { {
+static const struct group_dual group9 = { {
 	N, I(DstMem64 | Lock | PageTable, em_cmpxchg8b), N, N, N, N, N, N,
 }, {
 	N, N, N, N, N, N, N, N,
 } };
 
-static struct opcode group11[] = {
+static const struct opcode group11[] = {
 	I(DstMem | SrcImm | Mov | PageTable, em_mov),
 	X7(D(Undefined)),
 };
 
-static struct gprefix pfx_0f_6f_0f_7f = {
+static const struct gprefix pfx_0f_6f_0f_7f = {
 	I(Mmx, em_mov), I(Sse | Aligned, em_mov), N, I(Sse | Unaligned, em_mov),
 };
 
-static struct gprefix pfx_vmovntpx = {
+static const struct gprefix pfx_vmovntpx = {
 	I(0, em_mov), N, N, N,
 };
 
-static struct opcode opcode_table[256] = {
+static const struct opcode opcode_table[256] = {
 	/* 0x00 - 0x07 */
 	I6ALU(Lock, em_add),
 	I(ImplicitOps | Stack | No64 | Src2ES, em_push_sreg),
@@ -3677,7 +3748,7 @@ static struct opcode opcode_table[256] = {
 	I(DstReg | SrcMem | ModRM | Src2Imm, em_imul_3op),
 	I(SrcImmByte | Mov | Stack, em_push),
 	I(DstReg | SrcMem | ModRM | Src2ImmByte, em_imul_3op),
-	I2bvIP(DstDI | SrcDX | Mov | String, em_in, ins, check_perm_in), /* insb, insw/insd */
+	I2bvIP(DstDI | SrcDX | Mov | String | Unaligned, em_in, ins, check_perm_in), /* insb, insw/insd */
 	I2bvIP(SrcSI | DstDX | String, em_out, outs, check_perm_out), /* outsb, outsw/outsd */
 	/* 0x70 - 0x7F */
 	X16(D(SrcImmByte)),
@@ -3753,7 +3824,7 @@ static struct opcode opcode_table[256] = {
 	D(ImplicitOps), D(ImplicitOps), G(0, group4), G(0, group5),
 };
 
-static struct opcode twobyte_table[256] = {
+static const struct opcode twobyte_table[256] = {
 	/* 0x00 - 0x0F */
 	G(0, group6), GD(0, &group7), N, N,
 	N, I(ImplicitOps | VendorSpecific, em_syscall),
@@ -3924,7 +3995,7 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
 	case OpAcc:
 		op->type = OP_REG;
 		op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
-		op->addr.reg = &ctxt->regs[VCPU_REGS_RAX];
+		op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
 		fetch_register_operand(op);
 		op->orig_val = op->val;
 		break;
@@ -3932,19 +4003,20 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
 		op->type = OP_MEM;
 		op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
 		op->addr.mem.ea =
-			register_address(ctxt, ctxt->regs[VCPU_REGS_RDI]);
+			register_address(ctxt, reg_read(ctxt, VCPU_REGS_RDI));
 		op->addr.mem.seg = VCPU_SREG_ES;
 		op->val = 0;
+		op->count = 1;
 		break;
 	case OpDX:
 		op->type = OP_REG;
 		op->bytes = 2;
-		op->addr.reg = &ctxt->regs[VCPU_REGS_RDX];
+		op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RDX);
 		fetch_register_operand(op);
 		break;
 	case OpCL:
 		op->bytes = 1;
-		op->val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
+		op->val = reg_read(ctxt, VCPU_REGS_RCX) & 0xff;
 		break;
 	case OpImmByte:
 		rc = decode_imm(ctxt, op, 1, true);
@@ -3975,9 +4047,10 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
 		op->type = OP_MEM;
 		op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
 		op->addr.mem.ea =
-			register_address(ctxt, ctxt->regs[VCPU_REGS_RSI]);
+			register_address(ctxt, reg_read(ctxt, VCPU_REGS_RSI));
 		op->addr.mem.seg = seg_override(ctxt);
 		op->val = 0;
+		op->count = 1;
 		break;
 	case OpImmFAddr:
 		op->type = OP_IMM;
@@ -4281,9 +4354,10 @@ static void fetch_possible_mmx_operand(struct x86_emulate_ctxt *ctxt,
 		read_mmx_reg(ctxt, &op->mm_val, op->addr.mm);
 }
 
+
 int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
 {
-	struct x86_emulate_ops *ops = ctxt->ops;
+	const struct x86_emulate_ops *ops = ctxt->ops;
 	int rc = X86EMUL_CONTINUE;
 	int saved_dst_type = ctxt->dst.type;
 
@@ -4344,7 +4418,7 @@ int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
 	}
 
 	/* Instruction can only be executed in protected mode */
-	if ((ctxt->d & Prot) && !(ctxt->mode & X86EMUL_MODE_PROT)) {
+	if ((ctxt->d & Prot) && ctxt->mode < X86EMUL_MODE_PROT16) {
 		rc = emulate_ud(ctxt);
 		goto done;
 	}
@@ -4365,7 +4439,7 @@ int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
 
 	if (ctxt->rep_prefix && (ctxt->d & String)) {
 		/* All REP prefixes have the same first termination condition */
-		if (address_mask(ctxt, ctxt->regs[VCPU_REGS_RCX]) == 0) {
+		if (address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) == 0) {
 			ctxt->eip = ctxt->_eip;
 			goto done;
 		}
@@ -4438,7 +4512,7 @@ special_insn:
 		ctxt->dst.val = ctxt->src.addr.mem.ea;
 		break;
 	case 0x90 ... 0x97: /* nop / xchg reg, rax */
-		if (ctxt->dst.addr.reg == &ctxt->regs[VCPU_REGS_RAX])
+		if (ctxt->dst.addr.reg == reg_rmw(ctxt, VCPU_REGS_RAX))
 			break;
 		rc = em_xchg(ctxt);
 		break;
@@ -4466,7 +4540,7 @@ special_insn:
 		rc = em_grp2(ctxt);
 		break;
 	case 0xd2 ... 0xd3:	/* Grp2 */
-		ctxt->src.val = ctxt->regs[VCPU_REGS_RCX];
+		ctxt->src.val = reg_read(ctxt, VCPU_REGS_RCX);
 		rc = em_grp2(ctxt);
 		break;
 	case 0xe9: /* jmp rel */
@@ -4512,23 +4586,27 @@ writeback:
 	ctxt->dst.type = saved_dst_type;
 
 	if ((ctxt->d & SrcMask) == SrcSI)
-		string_addr_inc(ctxt, seg_override(ctxt),
-				VCPU_REGS_RSI, &ctxt->src);
+		string_addr_inc(ctxt, VCPU_REGS_RSI, &ctxt->src);
 
 	if ((ctxt->d & DstMask) == DstDI)
-		string_addr_inc(ctxt, VCPU_SREG_ES, VCPU_REGS_RDI,
-				&ctxt->dst);
+		string_addr_inc(ctxt, VCPU_REGS_RDI, &ctxt->dst);
 
 	if (ctxt->rep_prefix && (ctxt->d & String)) {
+		unsigned int count;
 		struct read_cache *r = &ctxt->io_read;
-		register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RCX], -1);
+		if ((ctxt->d & SrcMask) == SrcSI)
+			count = ctxt->src.count;
+		else
+			count = ctxt->dst.count;
+		register_address_increment(ctxt, reg_rmw(ctxt, VCPU_REGS_RCX),
+				-count);
 
 		if (!string_insn_completed(ctxt)) {
 			/*
 			 * Re-enter guest when pio read ahead buffer is empty
 			 * or, if it is not used, after each 1024 iteration.
 			 */
-			if ((r->end != 0 || ctxt->regs[VCPU_REGS_RCX] & 0x3ff) &&
+			if ((r->end != 0 || reg_read(ctxt, VCPU_REGS_RCX) & 0x3ff) &&
 			    (r->end == 0 || r->end != r->pos)) {
 				/*
 				 * Reset read cache. Usually happens before
@@ -4536,6 +4614,7 @@ writeback:
 				 * we have to do it here.
 				 */
 				ctxt->mem_read.end = 0;
+				writeback_registers(ctxt);
 				return EMULATION_RESTART;
 			}
 			goto done; /* skip rip writeback */
@@ -4550,6 +4629,9 @@ done:
 	if (rc == X86EMUL_INTERCEPTED)
 		return EMULATION_INTERCEPTED;
 
+	if (rc == X86EMUL_CONTINUE)
+		writeback_registers(ctxt);
+
 	return (rc == X86EMUL_UNHANDLEABLE) ? EMULATION_FAILED : EMULATION_OK;
 
 twobyte_insn:
@@ -4622,3 +4704,13 @@ twobyte_insn:
 cannot_emulate:
 	return EMULATION_FAILED;
 }
+
+void emulator_invalidate_register_cache(struct x86_emulate_ctxt *ctxt)
+{
+	invalidate_registers(ctxt);
+}
+
+void emulator_writeback_register_cache(struct x86_emulate_ctxt *ctxt)
+{
+	writeback_registers(ctxt);
+}
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index adba28f88d1a..11300d2fa714 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -108,7 +108,7 @@ static s64 __kpit_elapsed(struct kvm *kvm)
 	ktime_t remaining;
 	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
 
-	if (!ps->pit_timer.period)
+	if (!ps->period)
 		return 0;
 
 	/*
@@ -120,9 +120,9 @@ static s64 __kpit_elapsed(struct kvm *kvm)
 	 * itself with the initial count and continues counting
 	 * from there.
 	 */
-	remaining = hrtimer_get_remaining(&ps->pit_timer.timer);
-	elapsed = ps->pit_timer.period - ktime_to_ns(remaining);
-	elapsed = mod_64(elapsed, ps->pit_timer.period);
+	remaining = hrtimer_get_remaining(&ps->timer);
+	elapsed = ps->period - ktime_to_ns(remaining);
+	elapsed = mod_64(elapsed, ps->period);
 
 	return elapsed;
 }
@@ -238,12 +238,12 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 	int value;
 
 	spin_lock(&ps->inject_lock);
-	value = atomic_dec_return(&ps->pit_timer.pending);
+	value = atomic_dec_return(&ps->pending);
 	if (value < 0)
 		/* spurious acks can be generated if, for example, the
 		 * PIC is being reset.  Handle it gracefully here
 		 */
-		atomic_inc(&ps->pit_timer.pending);
+		atomic_inc(&ps->pending);
 	else if (value > 0)
 		/* in this case, we had multiple outstanding pit interrupts
 		 * that we needed to inject.  Reinject
@@ -261,28 +261,17 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 	if (!kvm_vcpu_is_bsp(vcpu) || !pit)
 		return;
 
-	timer = &pit->pit_state.pit_timer.timer;
+	timer = &pit->pit_state.timer;
 	if (hrtimer_cancel(timer))
 		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
 static void destroy_pit_timer(struct kvm_pit *pit)
 {
-	hrtimer_cancel(&pit->pit_state.pit_timer.timer);
+	hrtimer_cancel(&pit->pit_state.timer);
 	flush_kthread_work(&pit->expired);
 }
 
-static bool kpit_is_periodic(struct kvm_timer *ktimer)
-{
-	struct kvm_kpit_state *ps = container_of(ktimer, struct kvm_kpit_state,
-						 pit_timer);
-	return ps->is_periodic;
-}
-
-static struct kvm_timer_ops kpit_ops = {
-	.is_periodic = kpit_is_periodic,
-};
-
 static void pit_do_work(struct kthread_work *work)
 {
 	struct kvm_pit *pit = container_of(work, struct kvm_pit, expired);
@@ -322,16 +311,16 @@ static void pit_do_work(struct kthread_work *work)
 
 static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 {
-	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
-	struct kvm_pit *pt = ktimer->kvm->arch.vpit;
+	struct kvm_kpit_state *ps = container_of(data, struct kvm_kpit_state, timer);
+	struct kvm_pit *pt = ps->kvm->arch.vpit;
 
-	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
-		atomic_inc(&ktimer->pending);
+	if (ps->reinject || !atomic_read(&ps->pending)) {
+		atomic_inc(&ps->pending);
 		queue_kthread_work(&pt->worker, &pt->expired);
 	}
 
-	if (ktimer->t_ops->is_periodic(ktimer)) {
-		hrtimer_add_expires_ns(&ktimer->timer, ktimer->period);
+	if (ps->is_periodic) {
+		hrtimer_add_expires_ns(&ps->timer, ps->period);
 		return HRTIMER_RESTART;
 	} else
 		return HRTIMER_NORESTART;
@@ -340,7 +329,6 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
 {
 	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
-	struct kvm_timer *pt = &ps->pit_timer;
 	s64 interval;
 
 	if (!irqchip_in_kernel(kvm) || ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)
@@ -351,19 +339,18 @@ static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
 	pr_debug("create pit timer, interval is %llu nsec\n", interval);
 
 	/* TODO The new value only affected after the retriggered */
-	hrtimer_cancel(&pt->timer);
+	hrtimer_cancel(&ps->timer);
 	flush_kthread_work(&ps->pit->expired);
-	pt->period = interval;
+	ps->period = interval;
 	ps->is_periodic = is_period;
 
-	pt->timer.function = pit_timer_fn;
-	pt->t_ops = &kpit_ops;
-	pt->kvm = ps->pit->kvm;
+	ps->timer.function = pit_timer_fn;
+	ps->kvm = ps->pit->kvm;
 
-	atomic_set(&pt->pending, 0);
+	atomic_set(&ps->pending, 0);
 	ps->irq_ack = 1;
 
-	hrtimer_start(&pt->timer, ktime_add_ns(ktime_get(), interval),
+	hrtimer_start(&ps->timer, ktime_add_ns(ktime_get(), interval),
 		      HRTIMER_MODE_ABS);
 }
 
@@ -639,7 +626,7 @@ void kvm_pit_reset(struct kvm_pit *pit)
 	}
 	mutex_unlock(&pit->pit_state.lock);
 
-	atomic_set(&pit->pit_state.pit_timer.pending, 0);
+	atomic_set(&pit->pit_state.pending, 0);
 	pit->pit_state.irq_ack = 1;
 }
 
@@ -648,7 +635,7 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 	struct kvm_pit *pit = container_of(kimn, struct kvm_pit, mask_notifier);
 
 	if (!mask) {
-		atomic_set(&pit->pit_state.pit_timer.pending, 0);
+		atomic_set(&pit->pit_state.pending, 0);
 		pit->pit_state.irq_ack = 1;
 	}
 }
@@ -706,12 +693,11 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 
 	pit_state = &pit->pit_state;
 	pit_state->pit = pit;
-	hrtimer_init(&pit_state->pit_timer.timer,
-		     CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	hrtimer_init(&pit_state->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
 	pit_state->irq_ack_notifier.gsi = 0;
 	pit_state->irq_ack_notifier.irq_acked = kvm_pit_ack_irq;
 	kvm_register_irq_ack_notifier(kvm, &pit_state->irq_ack_notifier);
-	pit_state->pit_timer.reinject = true;
+	pit_state->reinject = true;
 	mutex_unlock(&pit->pit_state.lock);
 
 	kvm_pit_reset(pit);
@@ -761,7 +747,7 @@ void kvm_free_pit(struct kvm *kvm)
 		kvm_unregister_irq_ack_notifier(kvm,
 				&kvm->arch.vpit->pit_state.irq_ack_notifier);
 		mutex_lock(&kvm->arch.vpit->pit_state.lock);
-		timer = &kvm->arch.vpit->pit_state.pit_timer.timer;
+		timer = &kvm->arch.vpit->pit_state.timer;
 		hrtimer_cancel(timer);
 		flush_kthread_work(&kvm->arch.vpit->expired);
 		kthread_stop(kvm->arch.vpit->worker_task);
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index fdf40425ea1d..dd1b16b611b0 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -24,8 +24,12 @@ struct kvm_kpit_channel_state {
 struct kvm_kpit_state {
 	struct kvm_kpit_channel_state channels[3];
 	u32 flags;
-	struct kvm_timer pit_timer;
 	bool is_periodic;
+	s64 period; 				/* unit: ns */
+	struct hrtimer timer;
+	atomic_t pending;			/* accumulated triggered timers */
+	bool reinject;
+	struct kvm *kvm;
 	u32    speaker_data_on;
 	struct mutex lock;
 	struct kvm_pit *pit;
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1df8fb9e1d5d..848206df0967 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -190,17 +190,17 @@ void kvm_pic_update_irq(struct kvm_pic *s)
 
 int kvm_pic_set_irq(struct kvm_pic *s, int irq, int irq_source_id, int level)
 {
-	int ret = -1;
+	int ret, irq_level;
+
+	BUG_ON(irq < 0 || irq >= PIC_NUM_PINS);
 
 	pic_lock(s);
-	if (irq >= 0 && irq < PIC_NUM_PINS) {
-		int irq_level = __kvm_irq_line_state(&s->irq_states[irq],
-						     irq_source_id, level);
-		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, irq_level);
-		pic_update_irq(s);
-		trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
-				      s->pics[irq >> 3].imr, ret == 0);
-	}
+	irq_level = __kvm_irq_line_state(&s->irq_states[irq],
+					 irq_source_id, level);
+	ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, irq_level);
+	pic_update_irq(s);
+	trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
+			      s->pics[irq >> 3].imr, ret == 0);
 	pic_unlock(s);
 
 	return ret;
@@ -275,23 +275,20 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 {
 	int irq, i;
 	struct kvm_vcpu *vcpu;
-	u8 irr = s->irr, isr = s->imr;
+	u8 edge_irr = s->irr & ~s->elcr;
 	bool found = false;
 
 	s->last_irr = 0;
-	s->irr = 0;
+	s->irr &= s->elcr;
 	s->imr = 0;
-	s->isr = 0;
 	s->priority_add = 0;
-	s->irq_base = 0;
-	s->read_reg_select = 0;
-	s->poll = 0;
 	s->special_mask = 0;
-	s->init_state = 0;
-	s->auto_eoi = 0;
-	s->rotate_on_auto_eoi = 0;
-	s->special_fully_nested_mode = 0;
-	s->init4 = 0;
+	s->read_reg_select = 0;
+	if (!s->init4) {
+		s->special_fully_nested_mode = 0;
+		s->auto_eoi = 0;
+	}
+	s->init_state = 1;
 
 	kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm)
 		if (kvm_apic_accept_pic_intr(vcpu)) {
@@ -304,7 +301,7 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 		return;
 
 	for (irq = 0; irq < PIC_NUM_PINS/2; irq++)
-		if (irr & (1 << irq) || isr & (1 << irq))
+		if (edge_irr & (1 << irq))
 			pic_clear_isr(s, irq);
 }
 
@@ -317,22 +314,12 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 	if (addr == 0) {
 		if (val & 0x10) {
 			s->init4 = val & 1;
-			s->last_irr = 0;
-			s->irr &= s->elcr;
-			s->imr = 0;
-			s->priority_add = 0;
-			s->special_mask = 0;
-			s->read_reg_select = 0;
-			if (!s->init4) {
-				s->special_fully_nested_mode = 0;
-				s->auto_eoi = 0;
-			}
-			s->init_state = 1;
 			if (val & 0x02)
 				pr_pic_unimpl("single mode not supported");
 			if (val & 0x08)
 				pr_pic_unimpl(
-					"level sensitive irq not supported");
+						"level sensitive irq not supported");
+			kvm_pic_reset(s);
 		} else if (val & 0x08) {
 			if (val & 0x04)
 				s->poll = 1;
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 2086f2bfba33..2d03568e9498 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -70,7 +70,7 @@ struct kvm_pic {
 	struct kvm_io_device dev_slave;
 	struct kvm_io_device dev_eclr;
 	void (*ack_notifier)(void *opaque, int irq);
-	unsigned long irq_states[16];
+	unsigned long irq_states[PIC_NUM_PINS];
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm);
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
deleted file mode 100644
index 497dbaa366d4..000000000000
--- a/arch/x86/kvm/kvm_timer.h
+++ /dev/null
@@ -1,18 +0,0 @@
-
-struct kvm_timer {
-	struct hrtimer timer;
-	s64 period; 				/* unit: ns */
-	u32 timer_mode_mask;
-	u64 tscdeadline;
-	atomic_t pending;			/* accumulated triggered timers */
-	bool reinject;
-	struct kvm_timer_ops *t_ops;
-	struct kvm *kvm;
-	struct kvm_vcpu *vcpu;
-};
-
-struct kvm_timer_ops {
-	bool (*is_periodic)(struct kvm_timer *);
-};
-
-enum hrtimer_restart kvm_timer_fn(struct hrtimer *data);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ce878788a39f..c6e6b721b6ee 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -34,6 +34,7 @@
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <linux/atomic.h>
+#include <linux/jump_label.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
@@ -65,6 +66,7 @@
 #define APIC_DEST_NOSHORT		0x0
 #define APIC_DEST_MASK			0x800
 #define MAX_APIC_VECTOR			256
+#define APIC_VECTORS_PER_REG		32
 
 #define VEC_POS(v) ((v) & (32 - 1))
 #define REG_POS(v) (((v) >> 5) << 4)
@@ -72,11 +74,6 @@
 static unsigned int min_timer_period_us = 500;
 module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
 
-static inline u32 apic_get_reg(struct kvm_lapic *apic, int reg_off)
-{
-	return *((u32 *) (apic->regs + reg_off));
-}
-
 static inline void apic_set_reg(struct kvm_lapic *apic, int reg_off, u32 val)
 {
 	*((u32 *) (apic->regs + reg_off)) = val;
@@ -117,19 +114,23 @@ static inline int __apic_test_and_clear_vector(int vec, void *bitmap)
 	return __test_and_clear_bit(VEC_POS(vec), (bitmap) + REG_POS(vec));
 }
 
-static inline int apic_hw_enabled(struct kvm_lapic *apic)
-{
-	return (apic)->vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE;
-}
+struct static_key_deferred apic_hw_disabled __read_mostly;
+struct static_key_deferred apic_sw_disabled __read_mostly;
 
-static inline int  apic_sw_enabled(struct kvm_lapic *apic)
+static inline void apic_set_spiv(struct kvm_lapic *apic, u32 val)
 {
-	return apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_APIC_ENABLED;
+	if ((kvm_apic_get_reg(apic, APIC_SPIV) ^ val) & APIC_SPIV_APIC_ENABLED) {
+		if (val & APIC_SPIV_APIC_ENABLED)
+			static_key_slow_dec_deferred(&apic_sw_disabled);
+		else
+			static_key_slow_inc(&apic_sw_disabled.key);
+	}
+	apic_set_reg(apic, APIC_SPIV, val);
 }
 
 static inline int apic_enabled(struct kvm_lapic *apic)
 {
-	return apic_sw_enabled(apic) &&	apic_hw_enabled(apic);
+	return kvm_apic_sw_enabled(apic) &&	kvm_apic_hw_enabled(apic);
 }
 
 #define LVT_MASK	\
@@ -139,36 +140,135 @@ static inline int apic_enabled(struct kvm_lapic *apic)
 	(LVT_MASK | APIC_MODE_MASK | APIC_INPUT_POLARITY | \
 	 APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER)
 
+static inline int apic_x2apic_mode(struct kvm_lapic *apic)
+{
+	return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
+}
+
 static inline int kvm_apic_id(struct kvm_lapic *apic)
 {
-	return (apic_get_reg(apic, APIC_ID) >> 24) & 0xff;
+	return (kvm_apic_get_reg(apic, APIC_ID) >> 24) & 0xff;
+}
+
+static inline u16 apic_cluster_id(struct kvm_apic_map *map, u32 ldr)
+{
+	u16 cid;
+	ldr >>= 32 - map->ldr_bits;
+	cid = (ldr >> map->cid_shift) & map->cid_mask;
+
+	BUG_ON(cid >= ARRAY_SIZE(map->logical_map));
+
+	return cid;
+}
+
+static inline u16 apic_logical_id(struct kvm_apic_map *map, u32 ldr)
+{
+	ldr >>= (32 - map->ldr_bits);
+	return ldr & map->lid_mask;
+}
+
+static void recalculate_apic_map(struct kvm *kvm)
+{
+	struct kvm_apic_map *new, *old = NULL;
+	struct kvm_vcpu *vcpu;
+	int i;
+
+	new = kzalloc(sizeof(struct kvm_apic_map), GFP_KERNEL);
+
+	mutex_lock(&kvm->arch.apic_map_lock);
+
+	if (!new)
+		goto out;
+
+	new->ldr_bits = 8;
+	/* flat mode is default */
+	new->cid_shift = 8;
+	new->cid_mask = 0;
+	new->lid_mask = 0xff;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct kvm_lapic *apic = vcpu->arch.apic;
+		u16 cid, lid;
+		u32 ldr;
+
+		if (!kvm_apic_present(vcpu))
+			continue;
+
+		/*
+		 * All APICs have to be configured in the same mode by an OS.
+		 * We take advatage of this while building logical id loockup
+		 * table. After reset APICs are in xapic/flat mode, so if we
+		 * find apic with different setting we assume this is the mode
+		 * OS wants all apics to be in; build lookup table accordingly.
+		 */
+		if (apic_x2apic_mode(apic)) {
+			new->ldr_bits = 32;
+			new->cid_shift = 16;
+			new->cid_mask = new->lid_mask = 0xffff;
+		} else if (kvm_apic_sw_enabled(apic) &&
+				!new->cid_mask /* flat mode */ &&
+				kvm_apic_get_reg(apic, APIC_DFR) == APIC_DFR_CLUSTER) {
+			new->cid_shift = 4;
+			new->cid_mask = 0xf;
+			new->lid_mask = 0xf;
+		}
+
+		new->phys_map[kvm_apic_id(apic)] = apic;
+
+		ldr = kvm_apic_get_reg(apic, APIC_LDR);
+		cid = apic_cluster_id(new, ldr);
+		lid = apic_logical_id(new, ldr);
+
+		if (lid)
+			new->logical_map[cid][ffs(lid) - 1] = apic;
+	}
+out:
+	old = rcu_dereference_protected(kvm->arch.apic_map,
+			lockdep_is_held(&kvm->arch.apic_map_lock));
+	rcu_assign_pointer(kvm->arch.apic_map, new);
+	mutex_unlock(&kvm->arch.apic_map_lock);
+
+	if (old)
+		kfree_rcu(old, rcu);
+}
+
+static inline void kvm_apic_set_id(struct kvm_lapic *apic, u8 id)
+{
+	apic_set_reg(apic, APIC_ID, id << 24);
+	recalculate_apic_map(apic->vcpu->kvm);
+}
+
+static inline void kvm_apic_set_ldr(struct kvm_lapic *apic, u32 id)
+{
+	apic_set_reg(apic, APIC_LDR, id);
+	recalculate_apic_map(apic->vcpu->kvm);
 }
 
 static inline int apic_lvt_enabled(struct kvm_lapic *apic, int lvt_type)
 {
-	return !(apic_get_reg(apic, lvt_type) & APIC_LVT_MASKED);
+	return !(kvm_apic_get_reg(apic, lvt_type) & APIC_LVT_MASKED);
 }
 
 static inline int apic_lvt_vector(struct kvm_lapic *apic, int lvt_type)
 {
-	return apic_get_reg(apic, lvt_type) & APIC_VECTOR_MASK;
+	return kvm_apic_get_reg(apic, lvt_type) & APIC_VECTOR_MASK;
 }
 
 static inline int apic_lvtt_oneshot(struct kvm_lapic *apic)
 {
-	return ((apic_get_reg(apic, APIC_LVTT) &
+	return ((kvm_apic_get_reg(apic, APIC_LVTT) &
 		apic->lapic_timer.timer_mode_mask) == APIC_LVT_TIMER_ONESHOT);
 }
 
 static inline int apic_lvtt_period(struct kvm_lapic *apic)
 {
-	return ((apic_get_reg(apic, APIC_LVTT) &
+	return ((kvm_apic_get_reg(apic, APIC_LVTT) &
 		apic->lapic_timer.timer_mode_mask) == APIC_LVT_TIMER_PERIODIC);
 }
 
 static inline int apic_lvtt_tscdeadline(struct kvm_lapic *apic)
 {
-	return ((apic_get_reg(apic, APIC_LVTT) &
+	return ((kvm_apic_get_reg(apic, APIC_LVTT) &
 		apic->lapic_timer.timer_mode_mask) ==
 			APIC_LVT_TIMER_TSCDEADLINE);
 }
@@ -184,7 +284,7 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu)
 	struct kvm_cpuid_entry2 *feat;
 	u32 v = APIC_VERSION;
 
-	if (!irqchip_in_kernel(vcpu->kvm))
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return;
 
 	feat = kvm_find_cpuid_entry(apic->vcpu, 0x1, 0);
@@ -193,12 +293,7 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu)
 	apic_set_reg(apic, APIC_LVR, v);
 }
 
-static inline int apic_x2apic_mode(struct kvm_lapic *apic)
-{
-	return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
-}
-
-static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
+static const unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
 	LVT_MASK ,      /* part LVTT mask, timer mode mask added at runtime */
 	LVT_MASK | APIC_MODE_MASK,	/* LVTTHMR */
 	LVT_MASK | APIC_MODE_MASK,	/* LVTPC */
@@ -208,25 +303,30 @@ static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
 
 static int find_highest_vector(void *bitmap)
 {
-	u32 *word = bitmap;
-	int word_offset = MAX_APIC_VECTOR >> 5;
+	int vec;
+	u32 *reg;
 
-	while ((word_offset != 0) && (word[(--word_offset) << 2] == 0))
-		continue;
+	for (vec = MAX_APIC_VECTOR - APIC_VECTORS_PER_REG;
+	     vec >= 0; vec -= APIC_VECTORS_PER_REG) {
+		reg = bitmap + REG_POS(vec);
+		if (*reg)
+			return fls(*reg) - 1 + vec;
+	}
 
-	if (likely(!word_offset && !word[0]))
-		return -1;
-	else
-		return fls(word[word_offset << 2]) - 1 + (word_offset << 5);
+	return -1;
 }
 
 static u8 count_vectors(void *bitmap)
 {
-	u32 *word = bitmap;
-	int word_offset;
+	int vec;
+	u32 *reg;
 	u8 count = 0;
-	for (word_offset = 0; word_offset < MAX_APIC_VECTOR >> 5; ++word_offset)
-		count += hweight32(word[word_offset << 2]);
+
+	for (vec = 0; vec < MAX_APIC_VECTOR; vec += APIC_VECTORS_PER_REG) {
+		reg = bitmap + REG_POS(vec);
+		count += hweight32(*reg);
+	}
+
 	return count;
 }
 
@@ -285,7 +385,6 @@ static inline void apic_clear_isr(int vec, struct kvm_lapic *apic)
 
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
 	int highest_irr;
 
 	/* This may race with setting of irr in __apic_accept_irq() and
@@ -293,9 +392,9 @@ int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 	 * will cause vmexit immediately and the value will be recalculated
 	 * on the next vmentry.
 	 */
-	if (!apic)
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return 0;
-	highest_irr = apic_find_highest_irr(apic);
+	highest_irr = apic_find_highest_irr(vcpu->arch.apic);
 
 	return highest_irr;
 }
@@ -378,8 +477,8 @@ static void apic_update_ppr(struct kvm_lapic *apic)
 	u32 tpr, isrv, ppr, old_ppr;
 	int isr;
 
-	old_ppr = apic_get_reg(apic, APIC_PROCPRI);
-	tpr = apic_get_reg(apic, APIC_TASKPRI);
+	old_ppr = kvm_apic_get_reg(apic, APIC_PROCPRI);
+	tpr = kvm_apic_get_reg(apic, APIC_TASKPRI);
 	isr = apic_find_highest_isr(apic);
 	isrv = (isr != -1) ? isr : 0;
 
@@ -415,13 +514,13 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 	u32 logical_id;
 
 	if (apic_x2apic_mode(apic)) {
-		logical_id = apic_get_reg(apic, APIC_LDR);
+		logical_id = kvm_apic_get_reg(apic, APIC_LDR);
 		return logical_id & mda;
 	}
 
-	logical_id = GET_APIC_LOGICAL_ID(apic_get_reg(apic, APIC_LDR));
+	logical_id = GET_APIC_LOGICAL_ID(kvm_apic_get_reg(apic, APIC_LDR));
 
-	switch (apic_get_reg(apic, APIC_DFR)) {
+	switch (kvm_apic_get_reg(apic, APIC_DFR)) {
 	case APIC_DFR_FLAT:
 		if (logical_id & mda)
 			result = 1;
@@ -433,7 +532,7 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 		break;
 	default:
 		apic_debug("Bad DFR vcpu %d: %08x\n",
-			   apic->vcpu->vcpu_id, apic_get_reg(apic, APIC_DFR));
+			   apic->vcpu->vcpu_id, kvm_apic_get_reg(apic, APIC_DFR));
 		break;
 	}
 
@@ -478,6 +577,72 @@ int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
 	return result;
 }
 
+bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
+		struct kvm_lapic_irq *irq, int *r)
+{
+	struct kvm_apic_map *map;
+	unsigned long bitmap = 1;
+	struct kvm_lapic **dst;
+	int i;
+	bool ret = false;
+
+	*r = -1;
+
+	if (irq->shorthand == APIC_DEST_SELF) {
+		*r = kvm_apic_set_irq(src->vcpu, irq);
+		return true;
+	}
+
+	if (irq->shorthand)
+		return false;
+
+	rcu_read_lock();
+	map = rcu_dereference(kvm->arch.apic_map);
+
+	if (!map)
+		goto out;
+
+	if (irq->dest_mode == 0) { /* physical mode */
+		if (irq->delivery_mode == APIC_DM_LOWEST ||
+				irq->dest_id == 0xff)
+			goto out;
+		dst = &map->phys_map[irq->dest_id & 0xff];
+	} else {
+		u32 mda = irq->dest_id << (32 - map->ldr_bits);
+
+		dst = map->logical_map[apic_cluster_id(map, mda)];
+
+		bitmap = apic_logical_id(map, mda);
+
+		if (irq->delivery_mode == APIC_DM_LOWEST) {
+			int l = -1;
+			for_each_set_bit(i, &bitmap, 16) {
+				if (!dst[i])
+					continue;
+				if (l < 0)
+					l = i;
+				else if (kvm_apic_compare_prio(dst[i]->vcpu, dst[l]->vcpu) < 0)
+					l = i;
+			}
+
+			bitmap = (l >= 0) ? 1 << l : 0;
+		}
+	}
+
+	for_each_set_bit(i, &bitmap, 16) {
+		if (!dst[i])
+			continue;
+		if (*r < 0)
+			*r = 0;
+		*r += kvm_apic_set_irq(dst[i]->vcpu, irq);
+	}
+
+	ret = true;
+out:
+	rcu_read_unlock();
+	return ret;
+}
+
 /*
  * Add a pending IRQ into lapic.
  * Return 1 if successfully added and 0 if discarded.
@@ -591,7 +756,7 @@ static int apic_set_eoi(struct kvm_lapic *apic)
 	apic_clear_isr(vector, apic);
 	apic_update_ppr(apic);
 
-	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI) &&
+	if (!(kvm_apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI) &&
 	    kvm_ioapic_handles_vector(apic->vcpu->kvm, vector)) {
 		int trigger_mode;
 		if (apic_test_vector(vector, apic->regs + APIC_TMR))
@@ -606,8 +771,8 @@ static int apic_set_eoi(struct kvm_lapic *apic)
 
 static void apic_send_ipi(struct kvm_lapic *apic)
 {
-	u32 icr_low = apic_get_reg(apic, APIC_ICR);
-	u32 icr_high = apic_get_reg(apic, APIC_ICR2);
+	u32 icr_low = kvm_apic_get_reg(apic, APIC_ICR);
+	u32 icr_high = kvm_apic_get_reg(apic, APIC_ICR2);
 	struct kvm_lapic_irq irq;
 
 	irq.vector = icr_low & APIC_VECTOR_MASK;
@@ -642,7 +807,7 @@ static u32 apic_get_tmcct(struct kvm_lapic *apic)
 	ASSERT(apic != NULL);
 
 	/* if initial count is 0, current count should also be 0 */
-	if (apic_get_reg(apic, APIC_TMICT) == 0)
+	if (kvm_apic_get_reg(apic, APIC_TMICT) == 0)
 		return 0;
 
 	remaining = hrtimer_get_remaining(&apic->lapic_timer.timer);
@@ -696,13 +861,15 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 
 		val = apic_get_tmcct(apic);
 		break;
-
+	case APIC_PROCPRI:
+		apic_update_ppr(apic);
+		val = kvm_apic_get_reg(apic, offset);
+		break;
 	case APIC_TASKPRI:
 		report_tpr_access(apic, false);
 		/* fall thru */
 	default:
-		apic_update_ppr(apic);
-		val = apic_get_reg(apic, offset);
+		val = kvm_apic_get_reg(apic, offset);
 		break;
 	}
 
@@ -719,7 +886,7 @@ static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
 {
 	unsigned char alignment = offset & 0xf;
 	u32 result;
-	/* this bitmask has a bit cleared for each reserver register */
+	/* this bitmask has a bit cleared for each reserved register */
 	static const u64 rmask = 0x43ff01ffffffe70cULL;
 
 	if ((alignment + len) > 4) {
@@ -754,7 +921,7 @@ static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
 
 static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
 {
-	return apic_hw_enabled(apic) &&
+	return kvm_apic_hw_enabled(apic) &&
 	    addr >= apic->base_address &&
 	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
 }
@@ -777,7 +944,7 @@ static void update_divide_count(struct kvm_lapic *apic)
 {
 	u32 tmp1, tmp2, tdcr;
 
-	tdcr = apic_get_reg(apic, APIC_TDCR);
+	tdcr = kvm_apic_get_reg(apic, APIC_TDCR);
 	tmp1 = tdcr & 0xf;
 	tmp2 = ((tmp1 & 0x3) | ((tmp1 & 0x8) >> 1)) + 1;
 	apic->divide_count = 0x1 << (tmp2 & 0x7);
@@ -792,9 +959,9 @@ static void start_apic_timer(struct kvm_lapic *apic)
 	atomic_set(&apic->lapic_timer.pending, 0);
 
 	if (apic_lvtt_period(apic) || apic_lvtt_oneshot(apic)) {
-		/* lapic timer in oneshot or peroidic mode */
+		/* lapic timer in oneshot or periodic mode */
 		now = apic->lapic_timer.timer.base->get_time();
-		apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT)
+		apic->lapic_timer.period = (u64)kvm_apic_get_reg(apic, APIC_TMICT)
 			    * APIC_BUS_CYCLE_NS * apic->divide_count;
 
 		if (!apic->lapic_timer.period)
@@ -826,7 +993,7 @@ static void start_apic_timer(struct kvm_lapic *apic)
 			   "timer initial count 0x%x, period %lldns, "
 			   "expire @ 0x%016" PRIx64 ".\n", __func__,
 			   APIC_BUS_CYCLE_NS, ktime_to_ns(now),
-			   apic_get_reg(apic, APIC_TMICT),
+			   kvm_apic_get_reg(apic, APIC_TMICT),
 			   apic->lapic_timer.period,
 			   ktime_to_ns(ktime_add_ns(now,
 					apic->lapic_timer.period)));
@@ -858,7 +1025,7 @@ static void start_apic_timer(struct kvm_lapic *apic)
 
 static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 {
-	int nmi_wd_enabled = apic_lvt_nmi_mode(apic_get_reg(apic, APIC_LVT0));
+	int nmi_wd_enabled = apic_lvt_nmi_mode(kvm_apic_get_reg(apic, APIC_LVT0));
 
 	if (apic_lvt_nmi_mode(lvt0_val)) {
 		if (!nmi_wd_enabled) {
@@ -879,7 +1046,7 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 	switch (reg) {
 	case APIC_ID:		/* Local APIC ID */
 		if (!apic_x2apic_mode(apic))
-			apic_set_reg(apic, APIC_ID, val);
+			kvm_apic_set_id(apic, val >> 24);
 		else
 			ret = 1;
 		break;
@@ -895,29 +1062,30 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 
 	case APIC_LDR:
 		if (!apic_x2apic_mode(apic))
-			apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+			kvm_apic_set_ldr(apic, val & APIC_LDR_MASK);
 		else
 			ret = 1;
 		break;
 
 	case APIC_DFR:
-		if (!apic_x2apic_mode(apic))
+		if (!apic_x2apic_mode(apic)) {
 			apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
-		else
+			recalculate_apic_map(apic->vcpu->kvm);
+		} else
 			ret = 1;
 		break;
 
 	case APIC_SPIV: {
 		u32 mask = 0x3ff;
-		if (apic_get_reg(apic, APIC_LVR) & APIC_LVR_DIRECTED_EOI)
+		if (kvm_apic_get_reg(apic, APIC_LVR) & APIC_LVR_DIRECTED_EOI)
 			mask |= APIC_SPIV_DIRECTED_EOI;
-		apic_set_reg(apic, APIC_SPIV, val & mask);
+		apic_set_spiv(apic, val & mask);
 		if (!(val & APIC_SPIV_APIC_ENABLED)) {
 			int i;
 			u32 lvt_val;
 
 			for (i = 0; i < APIC_LVT_NUM; i++) {
-				lvt_val = apic_get_reg(apic,
+				lvt_val = kvm_apic_get_reg(apic,
 						       APIC_LVTT + 0x10 * i);
 				apic_set_reg(apic, APIC_LVTT + 0x10 * i,
 					     lvt_val | APIC_LVT_MASKED);
@@ -946,7 +1114,7 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 	case APIC_LVT1:
 	case APIC_LVTERR:
 		/* TODO: Check vector */
-		if (!apic_sw_enabled(apic))
+		if (!kvm_apic_sw_enabled(apic))
 			val |= APIC_LVT_MASKED;
 
 		val &= apic_lvt_mask[(reg - APIC_LVTT) >> 4];
@@ -955,12 +1123,12 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 		break;
 
 	case APIC_LVTT:
-		if ((apic_get_reg(apic, APIC_LVTT) &
+		if ((kvm_apic_get_reg(apic, APIC_LVTT) &
 		    apic->lapic_timer.timer_mode_mask) !=
 		   (val & apic->lapic_timer.timer_mode_mask))
 			hrtimer_cancel(&apic->lapic_timer.timer);
 
-		if (!apic_sw_enabled(apic))
+		if (!kvm_apic_sw_enabled(apic))
 			val |= APIC_LVT_MASKED;
 		val &= (apic_lvt_mask[0] | apic->lapic_timer.timer_mode_mask);
 		apic_set_reg(apic, APIC_LVTT, val);
@@ -1039,24 +1207,30 @@ static int apic_mmio_write(struct kvm_io_device *this,
 
 void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
-
-	if (apic)
+	if (kvm_vcpu_has_lapic(vcpu))
 		apic_reg_write(vcpu->arch.apic, APIC_EOI, 0);
 }
 EXPORT_SYMBOL_GPL(kvm_lapic_set_eoi);
 
 void kvm_free_lapic(struct kvm_vcpu *vcpu)
 {
+	struct kvm_lapic *apic = vcpu->arch.apic;
+
 	if (!vcpu->arch.apic)
 		return;
 
-	hrtimer_cancel(&vcpu->arch.apic->lapic_timer.timer);
+	hrtimer_cancel(&apic->lapic_timer.timer);
+
+	if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE))
+		static_key_slow_dec_deferred(&apic_hw_disabled);
+
+	if (!(kvm_apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_APIC_ENABLED))
+		static_key_slow_dec_deferred(&apic_sw_disabled);
 
-	if (vcpu->arch.apic->regs)
-		free_page((unsigned long)vcpu->arch.apic->regs);
+	if (apic->regs)
+		free_page((unsigned long)apic->regs);
 
-	kfree(vcpu->arch.apic);
+	kfree(apic);
 }
 
 /*
@@ -1068,10 +1242,9 @@ void kvm_free_lapic(struct kvm_vcpu *vcpu)
 u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
-	if (!apic)
-		return 0;
 
-	if (apic_lvtt_oneshot(apic) || apic_lvtt_period(apic))
+	if (!kvm_vcpu_has_lapic(vcpu) || apic_lvtt_oneshot(apic) ||
+			apic_lvtt_period(apic))
 		return 0;
 
 	return apic->lapic_timer.tscdeadline;
@@ -1080,10 +1253,9 @@ u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu)
 void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
-	if (!apic)
-		return;
 
-	if (apic_lvtt_oneshot(apic) || apic_lvtt_period(apic))
+	if (!kvm_vcpu_has_lapic(vcpu) || apic_lvtt_oneshot(apic) ||
+			apic_lvtt_period(apic))
 		return;
 
 	hrtimer_cancel(&apic->lapic_timer.timer);
@@ -1095,20 +1267,21 @@ void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!apic)
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return;
+
 	apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
-		     | (apic_get_reg(apic, APIC_TASKPRI) & 4));
+		     | (kvm_apic_get_reg(apic, APIC_TASKPRI) & 4));
 }
 
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
 	u64 tpr;
 
-	if (!apic)
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return 0;
-	tpr = (u64) apic_get_reg(apic, APIC_TASKPRI);
+
+	tpr = (u64) kvm_apic_get_reg(vcpu->arch.apic, APIC_TASKPRI);
 
 	return (tpr & 0xf0) >> 4;
 }
@@ -1123,6 +1296,15 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		return;
 	}
 
+	/* update jump label if enable bit changes */
+	if ((vcpu->arch.apic_base ^ value) & MSR_IA32_APICBASE_ENABLE) {
+		if (value & MSR_IA32_APICBASE_ENABLE)
+			static_key_slow_dec_deferred(&apic_hw_disabled);
+		else
+			static_key_slow_inc(&apic_hw_disabled.key);
+		recalculate_apic_map(vcpu->kvm);
+	}
+
 	if (!kvm_vcpu_is_bsp(apic->vcpu))
 		value &= ~MSR_IA32_APICBASE_BSP;
 
@@ -1130,7 +1312,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 	if (apic_x2apic_mode(apic)) {
 		u32 id = kvm_apic_id(apic);
 		u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf));
-		apic_set_reg(apic, APIC_LDR, ldr);
+		kvm_apic_set_ldr(apic, ldr);
 	}
 	apic->base_address = apic->vcpu->arch.apic_base &
 			     MSR_IA32_APICBASE_BASE;
@@ -1155,7 +1337,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	/* Stop the timer in case it's a reset to an active apic */
 	hrtimer_cancel(&apic->lapic_timer.timer);
 
-	apic_set_reg(apic, APIC_ID, vcpu->vcpu_id << 24);
+	kvm_apic_set_id(apic, vcpu->vcpu_id);
 	kvm_apic_set_version(apic->vcpu);
 
 	for (i = 0; i < APIC_LVT_NUM; i++)
@@ -1164,9 +1346,9 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		     SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
 
 	apic_set_reg(apic, APIC_DFR, 0xffffffffU);
-	apic_set_reg(apic, APIC_SPIV, 0xff);
+	apic_set_spiv(apic, 0xff);
 	apic_set_reg(apic, APIC_TASKPRI, 0);
-	apic_set_reg(apic, APIC_LDR, 0);
+	kvm_apic_set_ldr(apic, 0);
 	apic_set_reg(apic, APIC_ESR, 0);
 	apic_set_reg(apic, APIC_ICR, 0);
 	apic_set_reg(apic, APIC_ICR2, 0);
@@ -1183,7 +1365,8 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
 	if (kvm_vcpu_is_bsp(vcpu))
-		vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
+		kvm_lapic_set_base(vcpu,
+				vcpu->arch.apic_base | MSR_IA32_APICBASE_BSP);
 	vcpu->arch.pv_eoi.msr_val = 0;
 	apic_update_ppr(apic);
 
@@ -1196,45 +1379,34 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		   vcpu->arch.apic_base, apic->base_address);
 }
 
-bool kvm_apic_present(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.apic && apic_hw_enabled(vcpu->arch.apic);
-}
-
-int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
-{
-	return kvm_apic_present(vcpu) && apic_sw_enabled(vcpu->arch.apic);
-}
-
 /*
  *----------------------------------------------------------------------
  * timer interface
  *----------------------------------------------------------------------
  */
 
-static bool lapic_is_periodic(struct kvm_timer *ktimer)
+static bool lapic_is_periodic(struct kvm_lapic *apic)
 {
-	struct kvm_lapic *apic = container_of(ktimer, struct kvm_lapic,
-					      lapic_timer);
 	return apic_lvtt_period(apic);
 }
 
 int apic_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	struct kvm_lapic *lapic = vcpu->arch.apic;
+	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (lapic && apic_enabled(lapic) && apic_lvt_enabled(lapic, APIC_LVTT))
-		return atomic_read(&lapic->lapic_timer.pending);
+	if (kvm_vcpu_has_lapic(vcpu) && apic_enabled(apic) &&
+			apic_lvt_enabled(apic, APIC_LVTT))
+		return atomic_read(&apic->lapic_timer.pending);
 
 	return 0;
 }
 
 int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type)
 {
-	u32 reg = apic_get_reg(apic, lvt_type);
+	u32 reg = kvm_apic_get_reg(apic, lvt_type);
 	int vector, mode, trig_mode;
 
-	if (apic_hw_enabled(apic) && !(reg & APIC_LVT_MASKED)) {
+	if (kvm_apic_hw_enabled(apic) && !(reg & APIC_LVT_MASKED)) {
 		vector = reg & APIC_VECTOR_MASK;
 		mode = reg & APIC_MODE_MASK;
 		trig_mode = reg & APIC_LVT_LEVEL_TRIGGER;
@@ -1251,15 +1423,40 @@ void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu)
 		kvm_apic_local_deliver(apic, APIC_LVT0);
 }
 
-static struct kvm_timer_ops lapic_timer_ops = {
-	.is_periodic = lapic_is_periodic,
-};
-
 static const struct kvm_io_device_ops apic_mmio_ops = {
 	.read     = apic_mmio_read,
 	.write    = apic_mmio_write,
 };
 
+static enum hrtimer_restart apic_timer_fn(struct hrtimer *data)
+{
+	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
+	struct kvm_lapic *apic = container_of(ktimer, struct kvm_lapic, lapic_timer);
+	struct kvm_vcpu *vcpu = apic->vcpu;
+	wait_queue_head_t *q = &vcpu->wq;
+
+	/*
+	 * There is a race window between reading and incrementing, but we do
+	 * not care about potentially losing timer events in the !reinject
+	 * case anyway. Note: KVM_REQ_PENDING_TIMER is implicitly checked
+	 * in vcpu_enter_guest.
+	 */
+	if (!atomic_read(&ktimer->pending)) {
+		atomic_inc(&ktimer->pending);
+		/* FIXME: this code should not know anything about vcpus */
+		kvm_make_request(KVM_REQ_PENDING_TIMER, vcpu);
+	}
+
+	if (waitqueue_active(q))
+		wake_up_interruptible(q);
+
+	if (lapic_is_periodic(apic)) {
+		hrtimer_add_expires_ns(&ktimer->timer, ktimer->period);
+		return HRTIMER_RESTART;
+	} else
+		return HRTIMER_NORESTART;
+}
+
 int kvm_create_lapic(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic;
@@ -1283,14 +1480,17 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 
 	hrtimer_init(&apic->lapic_timer.timer, CLOCK_MONOTONIC,
 		     HRTIMER_MODE_ABS);
-	apic->lapic_timer.timer.function = kvm_timer_fn;
-	apic->lapic_timer.t_ops = &lapic_timer_ops;
-	apic->lapic_timer.kvm = vcpu->kvm;
-	apic->lapic_timer.vcpu = vcpu;
+	apic->lapic_timer.timer.function = apic_timer_fn;
 
-	apic->base_address = APIC_DEFAULT_PHYS_BASE;
-	vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
+	/*
+	 * APIC is created enabled. This will prevent kvm_lapic_set_base from
+	 * thinking that APIC satet has changed.
+	 */
+	vcpu->arch.apic_base = MSR_IA32_APICBASE_ENABLE;
+	kvm_lapic_set_base(vcpu,
+			APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE);
 
+	static_key_slow_inc(&apic_sw_disabled.key); /* sw disabled at reset */
 	kvm_lapic_reset(vcpu);
 	kvm_iodevice_init(&apic->dev, &apic_mmio_ops);
 
@@ -1306,23 +1506,23 @@ int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu)
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	int highest_irr;
 
-	if (!apic || !apic_enabled(apic))
+	if (!kvm_vcpu_has_lapic(vcpu) || !apic_enabled(apic))
 		return -1;
 
 	apic_update_ppr(apic);
 	highest_irr = apic_find_highest_irr(apic);
 	if ((highest_irr == -1) ||
-	    ((highest_irr & 0xF0) <= apic_get_reg(apic, APIC_PROCPRI)))
+	    ((highest_irr & 0xF0) <= kvm_apic_get_reg(apic, APIC_PROCPRI)))
 		return -1;
 	return highest_irr;
 }
 
 int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu)
 {
-	u32 lvt0 = apic_get_reg(vcpu->arch.apic, APIC_LVT0);
+	u32 lvt0 = kvm_apic_get_reg(vcpu->arch.apic, APIC_LVT0);
 	int r = 0;
 
-	if (!apic_hw_enabled(vcpu->arch.apic))
+	if (!kvm_apic_hw_enabled(vcpu->arch.apic))
 		r = 1;
 	if ((lvt0 & APIC_LVT_MASKED) == 0 &&
 	    GET_APIC_DELIVERY_MODE(lvt0) == APIC_MODE_EXTINT)
@@ -1334,7 +1534,10 @@ void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (apic && atomic_read(&apic->lapic_timer.pending) > 0) {
+	if (!kvm_vcpu_has_lapic(vcpu))
+		return;
+
+	if (atomic_read(&apic->lapic_timer.pending) > 0) {
 		if (kvm_apic_local_deliver(apic, APIC_LVTT))
 			atomic_dec(&apic->lapic_timer.pending);
 	}
@@ -1354,12 +1557,17 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
 	return vector;
 }
 
-void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu)
+void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
+		struct kvm_lapic_state *s)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	apic->base_address = vcpu->arch.apic_base &
-			     MSR_IA32_APICBASE_BASE;
+	kvm_lapic_set_base(vcpu, vcpu->arch.apic_base);
+	/* set SPIV separately to get count of SW disabled APICs right */
+	apic_set_spiv(apic, *((u32 *)(s->regs + APIC_SPIV)));
+	memcpy(vcpu->arch.apic->regs, s->regs, sizeof *s);
+	/* call kvm_apic_set_id() to put apic into apic_map */
+	kvm_apic_set_id(apic, kvm_apic_id(apic));
 	kvm_apic_set_version(vcpu);
 
 	apic_update_ppr(apic);
@@ -1374,13 +1582,12 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu)
 
 void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
 	struct hrtimer *timer;
 
-	if (!apic)
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return;
 
-	timer = &apic->lapic_timer.timer;
+	timer = &vcpu->arch.apic->lapic_timer.timer;
 	if (hrtimer_cancel(timer))
 		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
@@ -1478,7 +1685,7 @@ void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu)
 	if (!test_bit(KVM_APIC_CHECK_VAPIC, &vcpu->arch.apic_attention))
 		return;
 
-	tpr = apic_get_reg(apic, APIC_TASKPRI) & 0xff;
+	tpr = kvm_apic_get_reg(apic, APIC_TASKPRI) & 0xff;
 	max_irr = apic_find_highest_irr(apic);
 	if (max_irr < 0)
 		max_irr = 0;
@@ -1537,7 +1744,7 @@ int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 reg, u64 data)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!irqchip_in_kernel(vcpu->kvm))
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return 1;
 
 	/* if this is ICR write vector before command */
@@ -1551,7 +1758,7 @@ int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 reg, u64 *data)
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	u32 low, high = 0;
 
-	if (!irqchip_in_kernel(vcpu->kvm))
+	if (!kvm_vcpu_has_lapic(vcpu))
 		return 1;
 
 	if (apic_reg_read(apic, reg, 4, &low))
@@ -1576,3 +1783,10 @@ int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data)
 	return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
 					 addr);
 }
+
+void kvm_lapic_init(void)
+{
+	/* do not patch jump label more than once per second */
+	jump_label_rate_limit(&apic_hw_disabled, HZ);
+	jump_label_rate_limit(&apic_sw_disabled, HZ);
+}
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 4af5405ae1e2..e5ebf9f3571f 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -2,10 +2,17 @@
 #define __KVM_X86_LAPIC_H
 
 #include "iodev.h"
-#include "kvm_timer.h"
 
 #include <linux/kvm_host.h>
 
+struct kvm_timer {
+	struct hrtimer timer;
+	s64 period; 				/* unit: ns */
+	u32 timer_mode_mask;
+	u64 tscdeadline;
+	atomic_t pending;			/* accumulated triggered timers */
+};
+
 struct kvm_lapic {
 	unsigned long base_address;
 	struct kvm_io_device dev;
@@ -45,11 +52,13 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq);
 int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type);
 
+bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
+		struct kvm_lapic_irq *irq, int *r);
+
 u64 kvm_get_apic_base(struct kvm_vcpu *vcpu);
 void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data);
-void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
-int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
-bool kvm_apic_present(struct kvm_vcpu *vcpu);
+void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
+		struct kvm_lapic_state *s);
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
 
 u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu);
@@ -71,4 +80,48 @@ static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu)
 }
 
 int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data);
+void kvm_lapic_init(void);
+
+static inline u32 kvm_apic_get_reg(struct kvm_lapic *apic, int reg_off)
+{
+	        return *((u32 *) (apic->regs + reg_off));
+}
+
+extern struct static_key kvm_no_apic_vcpu;
+
+static inline bool kvm_vcpu_has_lapic(struct kvm_vcpu *vcpu)
+{
+	if (static_key_false(&kvm_no_apic_vcpu))
+		return vcpu->arch.apic;
+	return true;
+}
+
+extern struct static_key_deferred apic_hw_disabled;
+
+static inline int kvm_apic_hw_enabled(struct kvm_lapic *apic)
+{
+	if (static_key_false(&apic_hw_disabled.key))
+		return apic->vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE;
+	return MSR_IA32_APICBASE_ENABLE;
+}
+
+extern struct static_key_deferred apic_sw_disabled;
+
+static inline int kvm_apic_sw_enabled(struct kvm_lapic *apic)
+{
+	if (static_key_false(&apic_sw_disabled.key))
+		return kvm_apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_APIC_ENABLED;
+	return APIC_SPIV_APIC_ENABLED;
+}
+
+static inline bool kvm_apic_present(struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_has_lapic(vcpu) && kvm_apic_hw_enabled(vcpu->arch.apic);
+}
+
+static inline int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
+{
+	return kvm_apic_present(vcpu) && kvm_apic_sw_enabled(vcpu->arch.apic);
+}
+
 #endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 01ca00423938..d289fee1ffb8 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -556,6 +556,14 @@ static int mmu_spte_clear_track_bits(u64 *sptep)
 		return 0;
 
 	pfn = spte_to_pfn(old_spte);
+
+	/*
+	 * KVM does not hold the refcount of the page used by
+	 * kvm mmu, before reclaiming the page, we should
+	 * unmap it from mmu first.
+	 */
+	WARN_ON(!kvm_is_mmio_pfn(pfn) && !page_count(pfn_to_page(pfn)));
+
 	if (!shadow_accessed_mask || old_spte & shadow_accessed_mask)
 		kvm_set_pfn_accessed(pfn);
 	if (!shadow_dirty_mask || (old_spte & shadow_dirty_mask))
@@ -960,13 +968,10 @@ static void pte_list_walk(unsigned long *pte_list, pte_list_walk_fn fn)
 static unsigned long *__gfn_to_rmap(gfn_t gfn, int level,
 				    struct kvm_memory_slot *slot)
 {
-	struct kvm_lpage_info *linfo;
-
-	if (likely(level == PT_PAGE_TABLE_LEVEL))
-		return &slot->rmap[gfn - slot->base_gfn];
+	unsigned long idx;
 
-	linfo = lpage_info_slot(gfn, slot, level);
-	return &linfo->rmap_pde;
+	idx = gfn_to_index(gfn, slot->base_gfn, level);
+	return &slot->arch.rmap[level - PT_PAGE_TABLE_LEVEL][idx];
 }
 
 /*
@@ -1173,7 +1178,8 @@ void kvm_mmu_write_protect_pt_masked(struct kvm *kvm,
 	unsigned long *rmapp;
 
 	while (mask) {
-		rmapp = &slot->rmap[gfn_offset + __ffs(mask)];
+		rmapp = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
+				      PT_PAGE_TABLE_LEVEL, slot);
 		__rmap_write_protect(kvm, rmapp, PT_PAGE_TABLE_LEVEL, false);
 
 		/* clear the first set bit */
@@ -1200,7 +1206,7 @@ static bool rmap_write_protect(struct kvm *kvm, u64 gfn)
 }
 
 static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
-			   unsigned long data)
+			   struct kvm_memory_slot *slot, unsigned long data)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
@@ -1218,7 +1224,7 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
 }
 
 static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
-			     unsigned long data)
+			     struct kvm_memory_slot *slot, unsigned long data)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
@@ -1259,43 +1265,67 @@ static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
 	return 0;
 }
 
-static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
-			  unsigned long data,
-			  int (*handler)(struct kvm *kvm, unsigned long *rmapp,
-					 unsigned long data))
+static int kvm_handle_hva_range(struct kvm *kvm,
+				unsigned long start,
+				unsigned long end,
+				unsigned long data,
+				int (*handler)(struct kvm *kvm,
+					       unsigned long *rmapp,
+					       struct kvm_memory_slot *slot,
+					       unsigned long data))
 {
 	int j;
-	int ret;
-	int retval = 0;
+	int ret = 0;
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *memslot;
 
 	slots = kvm_memslots(kvm);
 
 	kvm_for_each_memslot(memslot, slots) {
-		unsigned long start = memslot->userspace_addr;
-		unsigned long end;
+		unsigned long hva_start, hva_end;
+		gfn_t gfn_start, gfn_end;
 
-		end = start + (memslot->npages << PAGE_SHIFT);
-		if (hva >= start && hva < end) {
-			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
-			gfn_t gfn = memslot->base_gfn + gfn_offset;
+		hva_start = max(start, memslot->userspace_addr);
+		hva_end = min(end, memslot->userspace_addr +
+					(memslot->npages << PAGE_SHIFT));
+		if (hva_start >= hva_end)
+			continue;
+		/*
+		 * {gfn(page) | page intersects with [hva_start, hva_end)} =
+		 * {gfn_start, gfn_start+1, ..., gfn_end-1}.
+		 */
+		gfn_start = hva_to_gfn_memslot(hva_start, memslot);
+		gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot);
 
-			ret = handler(kvm, &memslot->rmap[gfn_offset], data);
+		for (j = PT_PAGE_TABLE_LEVEL;
+		     j < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++j) {
+			unsigned long idx, idx_end;
+			unsigned long *rmapp;
 
-			for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
-				struct kvm_lpage_info *linfo;
+			/*
+			 * {idx(page_j) | page_j intersects with
+			 *  [hva_start, hva_end)} = {idx, idx+1, ..., idx_end}.
+			 */
+			idx = gfn_to_index(gfn_start, memslot->base_gfn, j);
+			idx_end = gfn_to_index(gfn_end - 1, memslot->base_gfn, j);
 
-				linfo = lpage_info_slot(gfn, memslot,
-							PT_DIRECTORY_LEVEL + j);
-				ret |= handler(kvm, &linfo->rmap_pde, data);
-			}
-			trace_kvm_age_page(hva, memslot, ret);
-			retval |= ret;
+			rmapp = __gfn_to_rmap(gfn_start, j, memslot);
+
+			for (; idx <= idx_end; ++idx)
+				ret |= handler(kvm, rmapp++, memslot, data);
 		}
 	}
 
-	return retval;
+	return ret;
+}
+
+static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
+			  unsigned long data,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp,
+					 struct kvm_memory_slot *slot,
+					 unsigned long data))
+{
+	return kvm_handle_hva_range(kvm, hva, hva + 1, data, handler);
 }
 
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
@@ -1303,13 +1333,18 @@ int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
 	return kvm_handle_hva(kvm, hva, 0, kvm_unmap_rmapp);
 }
 
+int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end)
+{
+	return kvm_handle_hva_range(kvm, start, end, 0, kvm_unmap_rmapp);
+}
+
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
 {
 	kvm_handle_hva(kvm, hva, (unsigned long)&pte, kvm_set_pte_rmapp);
 }
 
 static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
-			 unsigned long data)
+			 struct kvm_memory_slot *slot, unsigned long data)
 {
 	u64 *sptep;
 	struct rmap_iterator uninitialized_var(iter);
@@ -1323,8 +1358,10 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
 	 * This has some overhead, but not as much as the cost of swapping
 	 * out actively used pages or breaking up actively used hugepages.
 	 */
-	if (!shadow_accessed_mask)
-		return kvm_unmap_rmapp(kvm, rmapp, data);
+	if (!shadow_accessed_mask) {
+		young = kvm_unmap_rmapp(kvm, rmapp, slot, data);
+		goto out;
+	}
 
 	for (sptep = rmap_get_first(*rmapp, &iter); sptep;
 	     sptep = rmap_get_next(&iter)) {
@@ -1336,12 +1373,14 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
 				 (unsigned long *)sptep);
 		}
 	}
-
+out:
+	/* @data has hva passed to kvm_age_hva(). */
+	trace_kvm_age_page(data, slot, young);
 	return young;
 }
 
 static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
-			      unsigned long data)
+			      struct kvm_memory_slot *slot, unsigned long data)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
@@ -1379,13 +1418,13 @@ static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 
 	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 
-	kvm_unmap_rmapp(vcpu->kvm, rmapp, 0);
+	kvm_unmap_rmapp(vcpu->kvm, rmapp, NULL, 0);
 	kvm_flush_remote_tlbs(vcpu->kvm);
 }
 
 int kvm_age_hva(struct kvm *kvm, unsigned long hva)
 {
-	return kvm_handle_hva(kvm, hva, 0, kvm_age_rmapp);
+	return kvm_handle_hva(kvm, hva, hva, kvm_age_rmapp);
 }
 
 int kvm_test_age_hva(struct kvm *kvm, unsigned long hva)
@@ -2457,7 +2496,9 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 				rmap_recycle(vcpu, sptep, gfn);
 		}
 	}
-	kvm_release_pfn_clean(pfn);
+
+	if (!is_error_pfn(pfn))
+		kvm_release_pfn_clean(pfn);
 }
 
 static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
@@ -2469,17 +2510,12 @@ static pfn_t pte_prefetch_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn,
 				     bool no_dirty_log)
 {
 	struct kvm_memory_slot *slot;
-	unsigned long hva;
 
 	slot = gfn_to_memslot_dirty_bitmap(vcpu, gfn, no_dirty_log);
-	if (!slot) {
-		get_page(fault_page);
-		return page_to_pfn(fault_page);
-	}
+	if (!slot)
+		return KVM_PFN_ERR_FAULT;
 
-	hva = gfn_to_hva_memslot(slot, gfn);
-
-	return hva_to_pfn_atomic(vcpu->kvm, hva);
+	return gfn_to_pfn_memslot_atomic(slot, gfn);
 }
 
 static int direct_pte_prefetch_many(struct kvm_vcpu *vcpu,
@@ -2580,11 +2616,6 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 			sp = kvm_mmu_get_page(vcpu, pseudo_gfn, iterator.addr,
 					      iterator.level - 1,
 					      1, ACC_ALL, iterator.sptep);
-			if (!sp) {
-				pgprintk("nonpaging_map: ENOMEM\n");
-				kvm_release_pfn_clean(pfn);
-				return -ENOMEM;
-			}
 
 			mmu_spte_set(iterator.sptep,
 				     __pa(sp->spt)
@@ -2611,8 +2642,16 @@ static void kvm_send_hwpoison_signal(unsigned long address, struct task_struct *
 
 static int kvm_handle_bad_page(struct kvm_vcpu *vcpu, gfn_t gfn, pfn_t pfn)
 {
-	kvm_release_pfn_clean(pfn);
-	if (is_hwpoison_pfn(pfn)) {
+	/*
+	 * Do not cache the mmio info caused by writing the readonly gfn
+	 * into the spte otherwise read access on readonly gfn also can
+	 * caused mmio page fault and treat it as mmio access.
+	 * Return 1 to tell kvm to emulate it.
+	 */
+	if (pfn == KVM_PFN_ERR_RO_FAULT)
+		return 1;
+
+	if (pfn == KVM_PFN_ERR_HWPOISON) {
 		kvm_send_hwpoison_signal(gfn_to_hva(vcpu->kvm, gfn), current);
 		return 0;
 	}
@@ -3236,8 +3275,6 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 	if (!async)
 		return false; /* *pfn has correct page already */
 
-	put_page(pfn_to_page(*pfn));
-
 	if (!prefault && can_do_async_pf(vcpu)) {
 		trace_kvm_try_async_get_page(gva, gfn);
 		if (kvm_find_async_pf_gfn(vcpu, gfn)) {
@@ -3371,6 +3408,18 @@ static bool is_rsvd_bits_set(struct kvm_mmu *mmu, u64 gpte, int level)
 	return (gpte & mmu->rsvd_bits_mask[bit7][level-1]) != 0;
 }
 
+static inline void protect_clean_gpte(unsigned *access, unsigned gpte)
+{
+	unsigned mask;
+
+	BUILD_BUG_ON(PT_WRITABLE_MASK != ACC_WRITE_MASK);
+
+	mask = (unsigned)~ACC_WRITE_MASK;
+	/* Allow write access to dirty gptes */
+	mask |= (gpte >> (PT_DIRTY_SHIFT - PT_WRITABLE_SHIFT)) & PT_WRITABLE_MASK;
+	*access &= mask;
+}
+
 static bool sync_mmio_spte(u64 *sptep, gfn_t gfn, unsigned access,
 			   int *nr_present)
 {
@@ -3388,6 +3437,25 @@ static bool sync_mmio_spte(u64 *sptep, gfn_t gfn, unsigned access,
 	return false;
 }
 
+static inline unsigned gpte_access(struct kvm_vcpu *vcpu, u64 gpte)
+{
+	unsigned access;
+
+	access = (gpte & (PT_WRITABLE_MASK | PT_USER_MASK)) | ACC_EXEC_MASK;
+	access &= ~(gpte >> PT64_NX_SHIFT);
+
+	return access;
+}
+
+static inline bool is_last_gpte(struct kvm_mmu *mmu, unsigned level, unsigned gpte)
+{
+	unsigned index;
+
+	index = level - 1;
+	index |= (gpte & PT_PAGE_SIZE_MASK) >> (PT_PAGE_SIZE_SHIFT - 2);
+	return mmu->last_pte_bitmap & (1 << index);
+}
+
 #define PTTYPE 64
 #include "paging_tmpl.h"
 #undef PTTYPE
@@ -3457,6 +3525,56 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
 	}
 }
 
+static void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
+{
+	unsigned bit, byte, pfec;
+	u8 map;
+	bool fault, x, w, u, wf, uf, ff, smep;
+
+	smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP);
+	for (byte = 0; byte < ARRAY_SIZE(mmu->permissions); ++byte) {
+		pfec = byte << 1;
+		map = 0;
+		wf = pfec & PFERR_WRITE_MASK;
+		uf = pfec & PFERR_USER_MASK;
+		ff = pfec & PFERR_FETCH_MASK;
+		for (bit = 0; bit < 8; ++bit) {
+			x = bit & ACC_EXEC_MASK;
+			w = bit & ACC_WRITE_MASK;
+			u = bit & ACC_USER_MASK;
+
+			/* Not really needed: !nx will cause pte.nx to fault */
+			x |= !mmu->nx;
+			/* Allow supervisor writes if !cr0.wp */
+			w |= !is_write_protection(vcpu) && !uf;
+			/* Disallow supervisor fetches of user code if cr4.smep */
+			x &= !(smep && u && !uf);
+
+			fault = (ff && !x) || (uf && !u) || (wf && !w);
+			map |= fault << bit;
+		}
+		mmu->permissions[byte] = map;
+	}
+}
+
+static void update_last_pte_bitmap(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
+{
+	u8 map;
+	unsigned level, root_level = mmu->root_level;
+	const unsigned ps_set_index = 1 << 2;  /* bit 2 of index: ps */
+
+	if (root_level == PT32E_ROOT_LEVEL)
+		--root_level;
+	/* PT_PAGE_TABLE_LEVEL always terminates */
+	map = 1 | (1 << ps_set_index);
+	for (level = PT_DIRECTORY_LEVEL; level <= root_level; ++level) {
+		if (level <= PT_PDPE_LEVEL
+		    && (mmu->root_level >= PT32E_ROOT_LEVEL || is_pse(vcpu)))
+			map |= 1 << (ps_set_index | (level - 1));
+	}
+	mmu->last_pte_bitmap = map;
+}
+
 static int paging64_init_context_common(struct kvm_vcpu *vcpu,
 					struct kvm_mmu *context,
 					int level)
@@ -3465,6 +3583,8 @@ static int paging64_init_context_common(struct kvm_vcpu *vcpu,
 	context->root_level = level;
 
 	reset_rsvds_bits_mask(vcpu, context);
+	update_permission_bitmask(vcpu, context);
+	update_last_pte_bitmap(vcpu, context);
 
 	ASSERT(is_pae(vcpu));
 	context->new_cr3 = paging_new_cr3;
@@ -3493,6 +3613,8 @@ static int paging32_init_context(struct kvm_vcpu *vcpu,
 	context->root_level = PT32_ROOT_LEVEL;
 
 	reset_rsvds_bits_mask(vcpu, context);
+	update_permission_bitmask(vcpu, context);
+	update_last_pte_bitmap(vcpu, context);
 
 	context->new_cr3 = paging_new_cr3;
 	context->page_fault = paging32_page_fault;
@@ -3553,6 +3675,9 @@ static int init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 		context->gva_to_gpa = paging32_gva_to_gpa;
 	}
 
+	update_permission_bitmask(vcpu, context);
+	update_last_pte_bitmap(vcpu, context);
+
 	return 0;
 }
 
@@ -3628,6 +3753,9 @@ static int init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
 		g_context->gva_to_gpa = paging32_gva_to_gpa_nested;
 	}
 
+	update_permission_bitmask(vcpu, g_context);
+	update_last_pte_bitmap(vcpu, g_context);
+
 	return 0;
 }
 
@@ -4113,16 +4241,21 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc)
 		LIST_HEAD(invalid_list);
 
 		/*
+		 * Never scan more than sc->nr_to_scan VM instances.
+		 * Will not hit this condition practically since we do not try
+		 * to shrink more than one VM and it is very unlikely to see
+		 * !n_used_mmu_pages so many times.
+		 */
+		if (!nr_to_scan--)
+			break;
+		/*
 		 * n_used_mmu_pages is accessed without holding kvm->mmu_lock
 		 * here. We may skip a VM instance errorneosly, but we do not
 		 * want to shrink a VM that only started to populate its MMU
 		 * anyway.
 		 */
-		if (kvm->arch.n_used_mmu_pages > 0) {
-			if (!nr_to_scan--)
-				break;
+		if (!kvm->arch.n_used_mmu_pages)
 			continue;
-		}
 
 		idx = srcu_read_lock(&kvm->srcu);
 		spin_lock(&kvm->mmu_lock);
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index e374db9af021..69871080e866 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -18,8 +18,10 @@
 #define PT_PCD_MASK (1ULL << 4)
 #define PT_ACCESSED_SHIFT 5
 #define PT_ACCESSED_MASK (1ULL << PT_ACCESSED_SHIFT)
-#define PT_DIRTY_MASK (1ULL << 6)
-#define PT_PAGE_SIZE_MASK (1ULL << 7)
+#define PT_DIRTY_SHIFT 6
+#define PT_DIRTY_MASK (1ULL << PT_DIRTY_SHIFT)
+#define PT_PAGE_SIZE_SHIFT 7
+#define PT_PAGE_SIZE_MASK (1ULL << PT_PAGE_SIZE_SHIFT)
 #define PT_PAT_MASK (1ULL << 7)
 #define PT_GLOBAL_MASK (1ULL << 8)
 #define PT64_NX_SHIFT 63
@@ -88,17 +90,14 @@ static inline bool is_write_protection(struct kvm_vcpu *vcpu)
 	return kvm_read_cr0_bits(vcpu, X86_CR0_WP);
 }
 
-static inline bool check_write_user_access(struct kvm_vcpu *vcpu,
-					   bool write_fault, bool user_fault,
-					   unsigned long pte)
+/*
+ * Will a fault with a given page-fault error code (pfec) cause a permission
+ * fault with the given access (in ACC_* format)?
+ */
+static inline bool permission_fault(struct kvm_mmu *mmu, unsigned pte_access,
+				    unsigned pfec)
 {
-	if (unlikely(write_fault && !is_writable_pte(pte)
-	      && (user_fault || is_write_protection(vcpu))))
-		return false;
-
-	if (unlikely(user_fault && !(pte & PT_USER_MASK)))
-		return false;
-
-	return true;
+	return (mmu->permissions[pfec >> 1] >> pte_access) & 1;
 }
+
 #endif
diff --git a/arch/x86/kvm/mmu_audit.c b/arch/x86/kvm/mmu_audit.c
index 7d7d0b9e23eb..daff69e21150 100644
--- a/arch/x86/kvm/mmu_audit.c
+++ b/arch/x86/kvm/mmu_audit.c
@@ -116,10 +116,8 @@ static void audit_mappings(struct kvm_vcpu *vcpu, u64 *sptep, int level)
 	gfn = kvm_mmu_page_get_gfn(sp, sptep - sp->spt);
 	pfn = gfn_to_pfn_atomic(vcpu->kvm, gfn);
 
-	if (is_error_pfn(pfn)) {
-		kvm_release_pfn_clean(pfn);
+	if (is_error_pfn(pfn))
 		return;
-	}
 
 	hpa =  pfn << PAGE_SHIFT;
 	if ((*sptep & PT64_BASE_ADDR_MASK) != hpa)
@@ -190,7 +188,6 @@ static void check_mappings_rmap(struct kvm *kvm, struct kvm_mmu_page *sp)
 
 static void audit_write_protection(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
-	struct kvm_memory_slot *slot;
 	unsigned long *rmapp;
 	u64 *sptep;
 	struct rmap_iterator iter;
@@ -198,8 +195,7 @@ static void audit_write_protection(struct kvm *kvm, struct kvm_mmu_page *sp)
 	if (sp->role.direct || sp->unsync || sp->role.invalid)
 		return;
 
-	slot = gfn_to_memslot(kvm, sp->gfn);
-	rmapp = &slot->rmap[sp->gfn - slot->base_gfn];
+	rmapp = gfn_to_rmap(kvm, sp->gfn, PT_PAGE_TABLE_LEVEL);
 
 	for (sptep = rmap_get_first(*rmapp, &iter); sptep;
 	     sptep = rmap_get_next(&iter)) {
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index bb7cf01cae76..714e2c01a6fe 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -63,10 +63,12 @@
  */
 struct guest_walker {
 	int level;
+	unsigned max_level;
 	gfn_t table_gfn[PT_MAX_FULL_LEVELS];
 	pt_element_t ptes[PT_MAX_FULL_LEVELS];
 	pt_element_t prefetch_ptes[PTE_PREFETCH_NUM];
 	gpa_t pte_gpa[PT_MAX_FULL_LEVELS];
+	pt_element_t __user *ptep_user[PT_MAX_FULL_LEVELS];
 	unsigned pt_access;
 	unsigned pte_access;
 	gfn_t gfn;
@@ -101,38 +103,41 @@ static int FNAME(cmpxchg_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 	return (ret != orig_pte);
 }
 
-static unsigned FNAME(gpte_access)(struct kvm_vcpu *vcpu, pt_element_t gpte,
-				   bool last)
+static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu,
+					     struct kvm_mmu *mmu,
+					     struct guest_walker *walker,
+					     int write_fault)
 {
-	unsigned access;
-
-	access = (gpte & (PT_WRITABLE_MASK | PT_USER_MASK)) | ACC_EXEC_MASK;
-	if (last && !is_dirty_gpte(gpte))
-		access &= ~ACC_WRITE_MASK;
-
-#if PTTYPE == 64
-	if (vcpu->arch.mmu.nx)
-		access &= ~(gpte >> PT64_NX_SHIFT);
-#endif
-	return access;
-}
-
-static bool FNAME(is_last_gpte)(struct guest_walker *walker,
-				struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
-				pt_element_t gpte)
-{
-	if (walker->level == PT_PAGE_TABLE_LEVEL)
-		return true;
-
-	if ((walker->level == PT_DIRECTORY_LEVEL) && is_large_pte(gpte) &&
-	    (PTTYPE == 64 || is_pse(vcpu)))
-		return true;
+	unsigned level, index;
+	pt_element_t pte, orig_pte;
+	pt_element_t __user *ptep_user;
+	gfn_t table_gfn;
+	int ret;
+
+	for (level = walker->max_level; level >= walker->level; --level) {
+		pte = orig_pte = walker->ptes[level - 1];
+		table_gfn = walker->table_gfn[level - 1];
+		ptep_user = walker->ptep_user[level - 1];
+		index = offset_in_page(ptep_user) / sizeof(pt_element_t);
+		if (!(pte & PT_ACCESSED_MASK)) {
+			trace_kvm_mmu_set_accessed_bit(table_gfn, index, sizeof(pte));
+			pte |= PT_ACCESSED_MASK;
+		}
+		if (level == walker->level && write_fault && !is_dirty_gpte(pte)) {
+			trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
+			pte |= PT_DIRTY_MASK;
+		}
+		if (pte == orig_pte)
+			continue;
 
-	if ((walker->level == PT_PDPE_LEVEL) && is_large_pte(gpte) &&
-	    (mmu->root_level == PT64_ROOT_LEVEL))
-		return true;
+		ret = FNAME(cmpxchg_gpte)(vcpu, mmu, ptep_user, index, orig_pte, pte);
+		if (ret)
+			return ret;
 
-	return false;
+		mark_page_dirty(vcpu->kvm, table_gfn);
+		walker->ptes[level] = pte;
+	}
+	return 0;
 }
 
 /*
@@ -142,21 +147,22 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker,
 				    struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 				    gva_t addr, u32 access)
 {
+	int ret;
 	pt_element_t pte;
 	pt_element_t __user *uninitialized_var(ptep_user);
 	gfn_t table_gfn;
-	unsigned index, pt_access, uninitialized_var(pte_access);
+	unsigned index, pt_access, pte_access, accessed_dirty, shift;
 	gpa_t pte_gpa;
-	bool eperm, last_gpte;
 	int offset;
 	const int write_fault = access & PFERR_WRITE_MASK;
 	const int user_fault  = access & PFERR_USER_MASK;
 	const int fetch_fault = access & PFERR_FETCH_MASK;
 	u16 errcode = 0;
+	gpa_t real_gpa;
+	gfn_t gfn;
 
 	trace_kvm_mmu_pagetable_walk(addr, access);
 retry_walk:
-	eperm = false;
 	walker->level = mmu->root_level;
 	pte           = mmu->get_cr3(vcpu);
 
@@ -169,15 +175,21 @@ retry_walk:
 		--walker->level;
 	}
 #endif
+	walker->max_level = walker->level;
 	ASSERT((!is_long_mode(vcpu) && is_pae(vcpu)) ||
 	       (mmu->get_cr3(vcpu) & CR3_NONPAE_RESERVED_BITS) == 0);
 
-	pt_access = ACC_ALL;
+	accessed_dirty = PT_ACCESSED_MASK;
+	pt_access = pte_access = ACC_ALL;
+	++walker->level;
 
-	for (;;) {
+	do {
 		gfn_t real_gfn;
 		unsigned long host_addr;
 
+		pt_access &= pte_access;
+		--walker->level;
+
 		index = PT_INDEX(addr, walker->level);
 
 		table_gfn = gpte_to_gfn(pte);
@@ -199,6 +211,7 @@ retry_walk:
 		ptep_user = (pt_element_t __user *)((void *)host_addr + offset);
 		if (unlikely(__copy_from_user(&pte, ptep_user, sizeof(pte))))
 			goto error;
+		walker->ptep_user[walker->level - 1] = ptep_user;
 
 		trace_kvm_mmu_paging_element(pte, walker->level);
 
@@ -211,92 +224,48 @@ retry_walk:
 			goto error;
 		}
 
-		if (!check_write_user_access(vcpu, write_fault, user_fault,
-					  pte))
-			eperm = true;
-
-#if PTTYPE == 64
-		if (unlikely(fetch_fault && (pte & PT64_NX_MASK)))
-			eperm = true;
-#endif
-
-		last_gpte = FNAME(is_last_gpte)(walker, vcpu, mmu, pte);
-		if (last_gpte) {
-			pte_access = pt_access &
-				     FNAME(gpte_access)(vcpu, pte, true);
-			/* check if the kernel is fetching from user page */
-			if (unlikely(pte_access & PT_USER_MASK) &&
-			    kvm_read_cr4_bits(vcpu, X86_CR4_SMEP))
-				if (fetch_fault && !user_fault)
-					eperm = true;
-		}
-
-		if (!eperm && unlikely(!(pte & PT_ACCESSED_MASK))) {
-			int ret;
-			trace_kvm_mmu_set_accessed_bit(table_gfn, index,
-						       sizeof(pte));
-			ret = FNAME(cmpxchg_gpte)(vcpu, mmu, ptep_user, index,
-						  pte, pte|PT_ACCESSED_MASK);
-			if (unlikely(ret < 0))
-				goto error;
-			else if (ret)
-				goto retry_walk;
-
-			mark_page_dirty(vcpu->kvm, table_gfn);
-			pte |= PT_ACCESSED_MASK;
-		}
+		accessed_dirty &= pte;
+		pte_access = pt_access & gpte_access(vcpu, pte);
 
 		walker->ptes[walker->level - 1] = pte;
+	} while (!is_last_gpte(mmu, walker->level, pte));
 
-		if (last_gpte) {
-			int lvl = walker->level;
-			gpa_t real_gpa;
-			gfn_t gfn;
-			u32 ac;
-
-			gfn = gpte_to_gfn_lvl(pte, lvl);
-			gfn += (addr & PT_LVL_OFFSET_MASK(lvl)) >> PAGE_SHIFT;
-
-			if (PTTYPE == 32 &&
-			    walker->level == PT_DIRECTORY_LEVEL &&
-			    is_cpuid_PSE36())
-				gfn += pse36_gfn_delta(pte);
-
-			ac = write_fault | fetch_fault | user_fault;
+	if (unlikely(permission_fault(mmu, pte_access, access))) {
+		errcode |= PFERR_PRESENT_MASK;
+		goto error;
+	}
 
-			real_gpa = mmu->translate_gpa(vcpu, gfn_to_gpa(gfn),
-						      ac);
-			if (real_gpa == UNMAPPED_GVA)
-				return 0;
+	gfn = gpte_to_gfn_lvl(pte, walker->level);
+	gfn += (addr & PT_LVL_OFFSET_MASK(walker->level)) >> PAGE_SHIFT;
 
-			walker->gfn = real_gpa >> PAGE_SHIFT;
+	if (PTTYPE == 32 && walker->level == PT_DIRECTORY_LEVEL && is_cpuid_PSE36())
+		gfn += pse36_gfn_delta(pte);
 
-			break;
-		}
+	real_gpa = mmu->translate_gpa(vcpu, gfn_to_gpa(gfn), access);
+	if (real_gpa == UNMAPPED_GVA)
+		return 0;
 
-		pt_access &= FNAME(gpte_access)(vcpu, pte, false);
-		--walker->level;
-	}
+	walker->gfn = real_gpa >> PAGE_SHIFT;
 
-	if (unlikely(eperm)) {
-		errcode |= PFERR_PRESENT_MASK;
-		goto error;
-	}
+	if (!write_fault)
+		protect_clean_gpte(&pte_access, pte);
 
-	if (write_fault && unlikely(!is_dirty_gpte(pte))) {
-		int ret;
+	/*
+	 * On a write fault, fold the dirty bit into accessed_dirty by shifting it one
+	 * place right.
+	 *
+	 * On a read fault, do nothing.
+	 */
+	shift = write_fault >> ilog2(PFERR_WRITE_MASK);
+	shift *= PT_DIRTY_SHIFT - PT_ACCESSED_SHIFT;
+	accessed_dirty &= pte >> shift;
 
-		trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
-		ret = FNAME(cmpxchg_gpte)(vcpu, mmu, ptep_user, index,
-					  pte, pte|PT_DIRTY_MASK);
+	if (unlikely(!accessed_dirty)) {
+		ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, write_fault);
 		if (unlikely(ret < 0))
 			goto error;
 		else if (ret)
 			goto retry_walk;
-
-		mark_page_dirty(vcpu->kvm, table_gfn);
-		pte |= PT_DIRTY_MASK;
-		walker->ptes[walker->level - 1] = pte;
 	}
 
 	walker->pt_access = pt_access;
@@ -368,12 +337,11 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 		return;
 
 	pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
-	pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte, true);
+	pte_access = sp->role.access & gpte_access(vcpu, gpte);
+	protect_clean_gpte(&pte_access, gpte);
 	pfn = gfn_to_pfn_atomic(vcpu->kvm, gpte_to_gfn(gpte));
-	if (mmu_invalid_pfn(pfn)) {
-		kvm_release_pfn_clean(pfn);
+	if (mmu_invalid_pfn(pfn))
 		return;
-	}
 
 	/*
 	 * we call mmu_set_spte() with host_writable = true because that
@@ -443,15 +411,13 @@ static void FNAME(pte_prefetch)(struct kvm_vcpu *vcpu, struct guest_walker *gw,
 		if (FNAME(prefetch_invalid_gpte)(vcpu, sp, spte, gpte))
 			continue;
 
-		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte,
-								  true);
+		pte_access = sp->role.access & gpte_access(vcpu, gpte);
+		protect_clean_gpte(&pte_access, gpte);
 		gfn = gpte_to_gfn(gpte);
 		pfn = pte_prefetch_gfn_to_pfn(vcpu, gfn,
 				      pte_access & ACC_WRITE_MASK);
-		if (mmu_invalid_pfn(pfn)) {
-			kvm_release_pfn_clean(pfn);
+		if (mmu_invalid_pfn(pfn))
 			break;
-		}
 
 		mmu_set_spte(vcpu, spte, sp->role.access, pte_access, 0, 0,
 			     NULL, PT_PAGE_TABLE_LEVEL, gfn,
@@ -798,7 +764,8 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
 		gfn = gpte_to_gfn(gpte);
 		pte_access = sp->role.access;
-		pte_access &= FNAME(gpte_access)(vcpu, gpte, true);
+		pte_access &= gpte_access(vcpu, gpte);
+		protect_clean_gpte(&pte_access, gpte);
 
 		if (sync_mmio_spte(&sp->spt[i], gfn, pte_access, &nr_present))
 			continue;
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 9b7ec1150ab0..cfc258a6bf97 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -1,5 +1,5 @@
 /*
- * Kernel-based Virtual Machine -- Performane Monitoring Unit support
+ * Kernel-based Virtual Machine -- Performance Monitoring Unit support
  *
  * Copyright 2011 Red Hat, Inc. and/or its affiliates.
  *
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index baead950d6c8..d017df3899ef 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -163,7 +163,7 @@ static DEFINE_PER_CPU(u64, current_tsc_ratio);
 
 #define MSR_INVALID			0xffffffffU
 
-static struct svm_direct_access_msrs {
+static const struct svm_direct_access_msrs {
 	u32 index;   /* Index of the MSR */
 	bool always; /* True if intercept is always on */
 } direct_access_msrs[] = {
@@ -400,7 +400,7 @@ struct svm_init_data {
 	int r;
 };
 
-static u32 msrpm_ranges[] = {0, 0xc0000000, 0xc0010000};
+static const u32 msrpm_ranges[] = {0, 0xc0000000, 0xc0010000};
 
 #define NUM_MSR_MAPS ARRAY_SIZE(msrpm_ranges)
 #define MSRS_RANGE_SIZE 2048
@@ -1146,7 +1146,6 @@ static void init_vmcb(struct vcpu_svm *svm)
 
 	svm_set_efer(&svm->vcpu, 0);
 	save->dr6 = 0xffff0ff0;
-	save->dr7 = 0x400;
 	kvm_set_rflags(&svm->vcpu, 2);
 	save->rip = 0x0000fff0;
 	svm->vcpu.arch.regs[VCPU_REGS_RIP] = save->rip;
@@ -1643,7 +1642,7 @@ static void svm_set_segment(struct kvm_vcpu *vcpu,
 	mark_dirty(svm->vmcb, VMCB_SEG);
 }
 
-static void update_db_intercept(struct kvm_vcpu *vcpu)
+static void update_db_bp_intercept(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
@@ -1663,20 +1662,6 @@ static void update_db_intercept(struct kvm_vcpu *vcpu)
 		vcpu->guest_debug = 0;
 }
 
-static void svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
-		svm->vmcb->save.dr7 = dbg->arch.debugreg[7];
-	else
-		svm->vmcb->save.dr7 = vcpu->arch.dr7;
-
-	mark_dirty(svm->vmcb, VMCB_DR);
-
-	update_db_intercept(vcpu);
-}
-
 static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *sd)
 {
 	if (sd->next_asid > sd->max_asid) {
@@ -1748,7 +1733,7 @@ static int db_interception(struct vcpu_svm *svm)
 		if (!(svm->vcpu.guest_debug & KVM_GUESTDBG_SINGLESTEP))
 			svm->vmcb->save.rflags &=
 				~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-		update_db_intercept(&svm->vcpu);
+		update_db_bp_intercept(&svm->vcpu);
 	}
 
 	if (svm->vcpu.guest_debug &
@@ -2063,7 +2048,7 @@ static inline bool nested_svm_intr(struct vcpu_svm *svm)
 	if (svm->nested.intercept & 1ULL) {
 		/*
 		 * The #vmexit can't be emulated here directly because this
-		 * code path runs with irqs and preemtion disabled. A
+		 * code path runs with irqs and preemption disabled. A
 		 * #vmexit emulation might sleep. Only signal request for
 		 * the #vmexit here.
 		 */
@@ -2105,7 +2090,6 @@ static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, struct page **_page)
 	return kmap(page);
 
 error:
-	kvm_release_page_clean(page);
 	kvm_inject_gp(&svm->vcpu, 0);
 
 	return NULL;
@@ -2409,7 +2393,7 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 {
 	/*
 	 * This function merges the msr permission bitmaps of kvm and the
-	 * nested vmcb. It is omptimized in that it only merges the parts where
+	 * nested vmcb. It is optimized in that it only merges the parts where
 	 * the kvm msr permission bitmap may contain zero bits
 	 */
 	int i;
@@ -3268,7 +3252,7 @@ static int pause_interception(struct vcpu_svm *svm)
 	return 1;
 }
 
-static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = {
+static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = {
 	[SVM_EXIT_READ_CR0]			= cr_interception,
 	[SVM_EXIT_READ_CR3]			= cr_interception,
 	[SVM_EXIT_READ_CR4]			= cr_interception,
@@ -3660,7 +3644,7 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu)
 	 */
 	svm->nmi_singlestep = true;
 	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
-	update_db_intercept(vcpu);
+	update_db_bp_intercept(vcpu);
 }
 
 static int svm_set_tss_addr(struct kvm *kvm, unsigned int addr)
@@ -3783,12 +3767,6 @@ static void svm_cancel_injection(struct kvm_vcpu *vcpu)
 	svm_complete_interrupts(svm);
 }
 
-#ifdef CONFIG_X86_64
-#define R "r"
-#else
-#define R "e"
-#endif
-
 static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -3815,13 +3793,13 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	local_irq_enable();
 
 	asm volatile (
-		"push %%"R"bp; \n\t"
-		"mov %c[rbx](%[svm]), %%"R"bx \n\t"
-		"mov %c[rcx](%[svm]), %%"R"cx \n\t"
-		"mov %c[rdx](%[svm]), %%"R"dx \n\t"
-		"mov %c[rsi](%[svm]), %%"R"si \n\t"
-		"mov %c[rdi](%[svm]), %%"R"di \n\t"
-		"mov %c[rbp](%[svm]), %%"R"bp \n\t"
+		"push %%" _ASM_BP "; \n\t"
+		"mov %c[rbx](%[svm]), %%" _ASM_BX " \n\t"
+		"mov %c[rcx](%[svm]), %%" _ASM_CX " \n\t"
+		"mov %c[rdx](%[svm]), %%" _ASM_DX " \n\t"
+		"mov %c[rsi](%[svm]), %%" _ASM_SI " \n\t"
+		"mov %c[rdi](%[svm]), %%" _ASM_DI " \n\t"
+		"mov %c[rbp](%[svm]), %%" _ASM_BP " \n\t"
 #ifdef CONFIG_X86_64
 		"mov %c[r8](%[svm]),  %%r8  \n\t"
 		"mov %c[r9](%[svm]),  %%r9  \n\t"
@@ -3834,20 +3812,20 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 #endif
 
 		/* Enter guest mode */
-		"push %%"R"ax \n\t"
-		"mov %c[vmcb](%[svm]), %%"R"ax \n\t"
+		"push %%" _ASM_AX " \n\t"
+		"mov %c[vmcb](%[svm]), %%" _ASM_AX " \n\t"
 		__ex(SVM_VMLOAD) "\n\t"
 		__ex(SVM_VMRUN) "\n\t"
 		__ex(SVM_VMSAVE) "\n\t"
-		"pop %%"R"ax \n\t"
+		"pop %%" _ASM_AX " \n\t"
 
 		/* Save guest registers, load host registers */
-		"mov %%"R"bx, %c[rbx](%[svm]) \n\t"
-		"mov %%"R"cx, %c[rcx](%[svm]) \n\t"
-		"mov %%"R"dx, %c[rdx](%[svm]) \n\t"
-		"mov %%"R"si, %c[rsi](%[svm]) \n\t"
-		"mov %%"R"di, %c[rdi](%[svm]) \n\t"
-		"mov %%"R"bp, %c[rbp](%[svm]) \n\t"
+		"mov %%" _ASM_BX ", %c[rbx](%[svm]) \n\t"
+		"mov %%" _ASM_CX ", %c[rcx](%[svm]) \n\t"
+		"mov %%" _ASM_DX ", %c[rdx](%[svm]) \n\t"
+		"mov %%" _ASM_SI ", %c[rsi](%[svm]) \n\t"
+		"mov %%" _ASM_DI ", %c[rdi](%[svm]) \n\t"
+		"mov %%" _ASM_BP ", %c[rbp](%[svm]) \n\t"
 #ifdef CONFIG_X86_64
 		"mov %%r8,  %c[r8](%[svm]) \n\t"
 		"mov %%r9,  %c[r9](%[svm]) \n\t"
@@ -3858,7 +3836,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 		"mov %%r14, %c[r14](%[svm]) \n\t"
 		"mov %%r15, %c[r15](%[svm]) \n\t"
 #endif
-		"pop %%"R"bp"
+		"pop %%" _ASM_BP
 		:
 		: [svm]"a"(svm),
 		  [vmcb]"i"(offsetof(struct vcpu_svm, vmcb_pa)),
@@ -3879,9 +3857,11 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 		  [r15]"i"(offsetof(struct vcpu_svm, vcpu.arch.regs[VCPU_REGS_R15]))
 #endif
 		: "cc", "memory"
-		, R"bx", R"cx", R"dx", R"si", R"di"
 #ifdef CONFIG_X86_64
+		, "rbx", "rcx", "rdx", "rsi", "rdi"
 		, "r8", "r9", "r10", "r11" , "r12", "r13", "r14", "r15"
+#else
+		, "ebx", "ecx", "edx", "esi", "edi"
 #endif
 		);
 
@@ -3941,8 +3921,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	mark_all_clean(svm->vmcb);
 }
 
-#undef R
-
 static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -4069,7 +4047,7 @@ static void svm_fpu_deactivate(struct kvm_vcpu *vcpu)
 #define POST_MEM(exit) { .exit_code = (exit), \
 			.stage = X86_ICPT_POST_MEMACCESS, }
 
-static struct __x86_intercept {
+static const struct __x86_intercept {
 	u32 exit_code;
 	enum x86_intercept_stage stage;
 } x86_intercept_map[] = {
@@ -4260,7 +4238,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.vcpu_load = svm_vcpu_load,
 	.vcpu_put = svm_vcpu_put,
 
-	.set_guest_debug = svm_guest_debug,
+	.update_db_bp_intercept = update_db_bp_intercept,
 	.get_msr = svm_get_msr,
 	.set_msr = svm_set_msr,
 	.get_segment_base = svm_get_segment_base,
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
deleted file mode 100644
index 6b85cc647f34..000000000000
--- a/arch/x86/kvm/timer.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Kernel-based Virtual Machine driver for Linux
- *
- * This module enables machines with Intel VT-x extensions to run virtual
- * machines without emulation or binary translation.
- *
- * timer support
- *
- * Copyright 2010 Red Hat, Inc. and/or its affiliates.
- *
- * This work is licensed under the terms of the GNU GPL, version 2.  See
- * the COPYING file in the top-level directory.
- */
-
-#include <linux/kvm_host.h>
-#include <linux/kvm.h>
-#include <linux/hrtimer.h>
-#include <linux/atomic.h>
-#include "kvm_timer.h"
-
-enum hrtimer_restart kvm_timer_fn(struct hrtimer *data)
-{
-	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
-	struct kvm_vcpu *vcpu = ktimer->vcpu;
-	wait_queue_head_t *q = &vcpu->wq;
-
-	/*
-	 * There is a race window between reading and incrementing, but we do
-	 * not care about potentially losing timer events in the !reinject
-	 * case anyway. Note: KVM_REQ_PENDING_TIMER is implicitly checked
-	 * in vcpu_enter_guest.
-	 */
-	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
-		atomic_inc(&ktimer->pending);
-		/* FIXME: this code should not know anything about vcpus */
-		kvm_make_request(KVM_REQ_PENDING_TIMER, vcpu);
-	}
-
-	if (waitqueue_active(q))
-		wake_up_interruptible(q);
-
-	if (ktimer->t_ops->is_periodic(ktimer)) {
-		hrtimer_add_expires_ns(&ktimer->timer, ktimer->period);
-		return HRTIMER_RESTART;
-	} else
-		return HRTIMER_NORESTART;
-}
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index a71faf727ff3..bca63f04dccb 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -183,95 +183,6 @@ TRACE_EVENT(kvm_apic,
 #define KVM_ISA_VMX   1
 #define KVM_ISA_SVM   2
 
-#define VMX_EXIT_REASONS \
-	{ EXIT_REASON_EXCEPTION_NMI,		"EXCEPTION_NMI" }, \
-	{ EXIT_REASON_EXTERNAL_INTERRUPT,	"EXTERNAL_INTERRUPT" }, \
-	{ EXIT_REASON_TRIPLE_FAULT,		"TRIPLE_FAULT" }, \
-	{ EXIT_REASON_PENDING_INTERRUPT,	"PENDING_INTERRUPT" }, \
-	{ EXIT_REASON_NMI_WINDOW,		"NMI_WINDOW" }, \
-	{ EXIT_REASON_TASK_SWITCH,		"TASK_SWITCH" }, \
-	{ EXIT_REASON_CPUID,			"CPUID" }, \
-	{ EXIT_REASON_HLT,			"HLT" }, \
-	{ EXIT_REASON_INVLPG,			"INVLPG" }, \
-	{ EXIT_REASON_RDPMC,			"RDPMC" }, \
-	{ EXIT_REASON_RDTSC,			"RDTSC" }, \
-	{ EXIT_REASON_VMCALL,			"VMCALL" }, \
-	{ EXIT_REASON_VMCLEAR,			"VMCLEAR" }, \
-	{ EXIT_REASON_VMLAUNCH,			"VMLAUNCH" }, \
-	{ EXIT_REASON_VMPTRLD,			"VMPTRLD" }, \
-	{ EXIT_REASON_VMPTRST,			"VMPTRST" }, \
-	{ EXIT_REASON_VMREAD,			"VMREAD" }, \
-	{ EXIT_REASON_VMRESUME,			"VMRESUME" }, \
-	{ EXIT_REASON_VMWRITE,			"VMWRITE" }, \
-	{ EXIT_REASON_VMOFF,			"VMOFF" }, \
-	{ EXIT_REASON_VMON,			"VMON" }, \
-	{ EXIT_REASON_CR_ACCESS,		"CR_ACCESS" }, \
-	{ EXIT_REASON_DR_ACCESS,		"DR_ACCESS" }, \
-	{ EXIT_REASON_IO_INSTRUCTION,		"IO_INSTRUCTION" }, \
-	{ EXIT_REASON_MSR_READ,			"MSR_READ" }, \
-	{ EXIT_REASON_MSR_WRITE,		"MSR_WRITE" }, \
-	{ EXIT_REASON_MWAIT_INSTRUCTION,	"MWAIT_INSTRUCTION" }, \
-	{ EXIT_REASON_MONITOR_INSTRUCTION,	"MONITOR_INSTRUCTION" }, \
-	{ EXIT_REASON_PAUSE_INSTRUCTION,	"PAUSE_INSTRUCTION" }, \
-	{ EXIT_REASON_MCE_DURING_VMENTRY,	"MCE_DURING_VMENTRY" }, \
-	{ EXIT_REASON_TPR_BELOW_THRESHOLD,	"TPR_BELOW_THRESHOLD" },	\
-	{ EXIT_REASON_APIC_ACCESS,		"APIC_ACCESS" }, \
-	{ EXIT_REASON_EPT_VIOLATION,		"EPT_VIOLATION" }, \
-	{ EXIT_REASON_EPT_MISCONFIG,		"EPT_MISCONFIG" }, \
-	{ EXIT_REASON_WBINVD,			"WBINVD" }
-
-#define SVM_EXIT_REASONS \
-	{ SVM_EXIT_READ_CR0,			"read_cr0" }, \
-	{ SVM_EXIT_READ_CR3,			"read_cr3" }, \
-	{ SVM_EXIT_READ_CR4,			"read_cr4" }, \
-	{ SVM_EXIT_READ_CR8,			"read_cr8" }, \
-	{ SVM_EXIT_WRITE_CR0,			"write_cr0" }, \
-	{ SVM_EXIT_WRITE_CR3,			"write_cr3" }, \
-	{ SVM_EXIT_WRITE_CR4,			"write_cr4" }, \
-	{ SVM_EXIT_WRITE_CR8,			"write_cr8" }, \
-	{ SVM_EXIT_READ_DR0,			"read_dr0" }, \
-	{ SVM_EXIT_READ_DR1,			"read_dr1" }, \
-	{ SVM_EXIT_READ_DR2,			"read_dr2" }, \
-	{ SVM_EXIT_READ_DR3,			"read_dr3" }, \
-	{ SVM_EXIT_WRITE_DR0,			"write_dr0" }, \
-	{ SVM_EXIT_WRITE_DR1,			"write_dr1" }, \
-	{ SVM_EXIT_WRITE_DR2,			"write_dr2" }, \
-	{ SVM_EXIT_WRITE_DR3,			"write_dr3" }, \
-	{ SVM_EXIT_WRITE_DR5,			"write_dr5" }, \
-	{ SVM_EXIT_WRITE_DR7,			"write_dr7" }, \
-	{ SVM_EXIT_EXCP_BASE + DB_VECTOR,	"DB excp" }, \
-	{ SVM_EXIT_EXCP_BASE + BP_VECTOR,	"BP excp" }, \
-	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,	"UD excp" }, \
-	{ SVM_EXIT_EXCP_BASE + PF_VECTOR,	"PF excp" }, \
-	{ SVM_EXIT_EXCP_BASE + NM_VECTOR,	"NM excp" }, \
-	{ SVM_EXIT_EXCP_BASE + MC_VECTOR,	"MC excp" }, \
-	{ SVM_EXIT_INTR,			"interrupt" }, \
-	{ SVM_EXIT_NMI,				"nmi" }, \
-	{ SVM_EXIT_SMI,				"smi" }, \
-	{ SVM_EXIT_INIT,			"init" }, \
-	{ SVM_EXIT_VINTR,			"vintr" }, \
-	{ SVM_EXIT_CPUID,			"cpuid" }, \
-	{ SVM_EXIT_INVD,			"invd" }, \
-	{ SVM_EXIT_HLT,				"hlt" }, \
-	{ SVM_EXIT_INVLPG,			"invlpg" }, \
-	{ SVM_EXIT_INVLPGA,			"invlpga" }, \
-	{ SVM_EXIT_IOIO,			"io" }, \
-	{ SVM_EXIT_MSR,				"msr" }, \
-	{ SVM_EXIT_TASK_SWITCH,			"task_switch" }, \
-	{ SVM_EXIT_SHUTDOWN,			"shutdown" }, \
-	{ SVM_EXIT_VMRUN,			"vmrun" }, \
-	{ SVM_EXIT_VMMCALL,			"hypercall" }, \
-	{ SVM_EXIT_VMLOAD,			"vmload" }, \
-	{ SVM_EXIT_VMSAVE,			"vmsave" }, \
-	{ SVM_EXIT_STGI,			"stgi" }, \
-	{ SVM_EXIT_CLGI,			"clgi" }, \
-	{ SVM_EXIT_SKINIT,			"skinit" }, \
-	{ SVM_EXIT_WBINVD,			"wbinvd" }, \
-	{ SVM_EXIT_MONITOR,			"monitor" }, \
-	{ SVM_EXIT_MWAIT,			"mwait" }, \
-	{ SVM_EXIT_XSETBV,			"xsetbv" }, \
-	{ SVM_EXIT_NPF,				"npf" }
-
 /*
  * Tracepoint for kvm guest exit:
  */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c39b60707e02..ad6b1dd06f8b 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -127,6 +127,8 @@ module_param(ple_gap, int, S_IRUGO);
 static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
 module_param(ple_window, int, S_IRUGO);
 
+extern const ulong vmx_return;
+
 #define NR_AUTOLOAD_MSRS 8
 #define VMCS02_POOL_SIZE 1
 
@@ -405,16 +407,16 @@ struct vcpu_vmx {
 	struct {
 		int vm86_active;
 		ulong save_rflags;
+		struct kvm_segment segs[8];
+	} rmode;
+	struct {
+		u32 bitmask; /* 4 bits per segment (1 bit per field) */
 		struct kvm_save_segment {
 			u16 selector;
 			unsigned long base;
 			u32 limit;
 			u32 ar;
-		} tr, es, ds, fs, gs;
-	} rmode;
-	struct {
-		u32 bitmask; /* 4 bits per segment (1 bit per field) */
-		struct kvm_save_segment seg[8];
+		} seg[8];
 	} segment_cache;
 	int vpid;
 	bool emulation_required;
@@ -450,7 +452,7 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
 #define FIELD64(number, name)	[number] = VMCS12_OFFSET(name), \
 				[number##_HIGH] = VMCS12_OFFSET(name)+4
 
-static unsigned short vmcs_field_to_offset_table[] = {
+static const unsigned short vmcs_field_to_offset_table[] = {
 	FIELD(VIRTUAL_PROCESSOR_ID, virtual_processor_id),
 	FIELD(GUEST_ES_SELECTOR, guest_es_selector),
 	FIELD(GUEST_CS_SELECTOR, guest_cs_selector),
@@ -596,10 +598,9 @@ static inline struct vmcs12 *get_vmcs12(struct kvm_vcpu *vcpu)
 static struct page *nested_get_page(struct kvm_vcpu *vcpu, gpa_t addr)
 {
 	struct page *page = gfn_to_page(vcpu->kvm, addr >> PAGE_SHIFT);
-	if (is_error_page(page)) {
-		kvm_release_page_clean(page);
+	if (is_error_page(page))
 		return NULL;
-	}
+
 	return page;
 }
 
@@ -667,7 +668,7 @@ static struct vmx_capability {
 		.ar_bytes = GUEST_##seg##_AR_BYTES,	   	\
 	}
 
-static struct kvm_vmx_segment_field {
+static const struct kvm_vmx_segment_field {
 	unsigned selector;
 	unsigned base;
 	unsigned limit;
@@ -1343,7 +1344,7 @@ static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 	guest_efer = vmx->vcpu.arch.efer;
 
 	/*
-	 * NX is emulated; LMA and LME handled by hardware; SCE meaninless
+	 * NX is emulated; LMA and LME handled by hardware; SCE meaningless
 	 * outside long mode
 	 */
 	ignore_bits = EFER_NX | EFER_SCE;
@@ -1488,20 +1489,17 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 		loadsegment(ds, vmx->host_state.ds_sel);
 		loadsegment(es, vmx->host_state.es_sel);
 	}
-#else
-	/*
-	 * The sysexit path does not restore ds/es, so we must set them to
-	 * a reasonable value ourselves.
-	 */
-	loadsegment(ds, __USER_DS);
-	loadsegment(es, __USER_DS);
 #endif
 	reload_tss();
 #ifdef CONFIG_X86_64
 	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
 #endif
-	if (user_has_fpu())
-		clts();
+	/*
+	 * If the FPU is not active (through the host task or
+	 * the guest vcpu), then restore the cr0.TS bit.
+	 */
+	if (!user_has_fpu() && !vmx->vcpu.guest_fpu_loaded)
+		stts();
 	load_gdt(&__get_cpu_var(host_gdt));
 }
 
@@ -1998,7 +1996,7 @@ static __init void nested_vmx_setup_ctls_msrs(void)
 #endif
 		CPU_BASED_MOV_DR_EXITING | CPU_BASED_UNCOND_IO_EXITING |
 		CPU_BASED_USE_IO_BITMAPS | CPU_BASED_MONITOR_EXITING |
-		CPU_BASED_RDPMC_EXITING |
+		CPU_BASED_RDPMC_EXITING | CPU_BASED_RDTSC_EXITING |
 		CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
 	/*
 	 * We can allow some features even when not supported by the
@@ -2294,16 +2292,6 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 	}
 }
 
-static void set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
-{
-	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
-		vmcs_writel(GUEST_DR7, dbg->arch.debugreg[7]);
-	else
-		vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
-
-	update_exception_bitmap(vcpu);
-}
-
 static __init int cpu_has_kvm_support(void)
 {
 	return cpu_has_vmx();
@@ -2701,20 +2689,17 @@ static __exit void hardware_unsetup(void)
 	free_kvm_area();
 }
 
-static void fix_pmode_dataseg(int seg, struct kvm_save_segment *save)
+static void fix_pmode_dataseg(struct kvm_vcpu *vcpu, int seg, struct kvm_segment *save)
 {
-	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	struct kvm_segment tmp = *save;
 
-	if (vmcs_readl(sf->base) == save->base && (save->base & AR_S_MASK)) {
-		vmcs_write16(sf->selector, save->selector);
-		vmcs_writel(sf->base, save->base);
-		vmcs_write32(sf->limit, save->limit);
-		vmcs_write32(sf->ar_bytes, save->ar);
-	} else {
-		u32 dpl = (vmcs_read16(sf->selector) & SELECTOR_RPL_MASK)
-			<< AR_DPL_SHIFT;
-		vmcs_write32(sf->ar_bytes, 0x93 | dpl);
+	if (!(vmcs_readl(sf->base) == tmp.base && tmp.s)) {
+		tmp.base = vmcs_readl(sf->base);
+		tmp.selector = vmcs_read16(sf->selector);
+		tmp.s = 1;
 	}
+	vmx_set_segment(vcpu, &tmp, seg);
 }
 
 static void enter_pmode(struct kvm_vcpu *vcpu)
@@ -2727,10 +2712,7 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 
 	vmx_segment_cache_clear(vmx);
 
-	vmcs_write16(GUEST_TR_SELECTOR, vmx->rmode.tr.selector);
-	vmcs_writel(GUEST_TR_BASE, vmx->rmode.tr.base);
-	vmcs_write32(GUEST_TR_LIMIT, vmx->rmode.tr.limit);
-	vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
+	vmx_set_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
 	flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
@@ -2745,10 +2727,10 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	if (emulate_invalid_guest_state)
 		return;
 
-	fix_pmode_dataseg(VCPU_SREG_ES, &vmx->rmode.es);
-	fix_pmode_dataseg(VCPU_SREG_DS, &vmx->rmode.ds);
-	fix_pmode_dataseg(VCPU_SREG_GS, &vmx->rmode.gs);
-	fix_pmode_dataseg(VCPU_SREG_FS, &vmx->rmode.fs);
+	fix_pmode_dataseg(vcpu, VCPU_SREG_ES, &vmx->rmode.segs[VCPU_SREG_ES]);
+	fix_pmode_dataseg(vcpu, VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]);
+	fix_pmode_dataseg(vcpu, VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]);
+	fix_pmode_dataseg(vcpu, VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]);
 
 	vmx_segment_cache_clear(vmx);
 
@@ -2776,14 +2758,10 @@ static gva_t rmode_tss_base(struct kvm *kvm)
 	return kvm->arch.tss_addr;
 }
 
-static void fix_rmode_seg(int seg, struct kvm_save_segment *save)
+static void fix_rmode_seg(int seg, struct kvm_segment *save)
 {
-	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
 
-	save->selector = vmcs_read16(sf->selector);
-	save->base = vmcs_readl(sf->base);
-	save->limit = vmcs_read32(sf->limit);
-	save->ar = vmcs_read32(sf->ar_bytes);
 	vmcs_write16(sf->selector, save->base >> 4);
 	vmcs_write32(sf->base, save->base & 0xffff0);
 	vmcs_write32(sf->limit, 0xffff);
@@ -2803,9 +2781,16 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	if (enable_unrestricted_guest)
 		return;
 
+	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
+	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_ES], VCPU_SREG_ES);
+	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_DS], VCPU_SREG_DS);
+	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_FS], VCPU_SREG_FS);
+	vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_GS], VCPU_SREG_GS);
+
 	vmx->emulation_required = 1;
 	vmx->rmode.vm86_active = 1;
 
+
 	/*
 	 * Very old userspace does not call KVM_SET_TSS_ADDR before entering
 	 * vcpu. Call it here with phys address pointing 16M below 4G.
@@ -2820,14 +2805,8 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 
 	vmx_segment_cache_clear(vmx);
 
-	vmx->rmode.tr.selector = vmcs_read16(GUEST_TR_SELECTOR);
-	vmx->rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
 	vmcs_writel(GUEST_TR_BASE, rmode_tss_base(vcpu->kvm));
-
-	vmx->rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
 	vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1);
-
-	vmx->rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
 	vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
@@ -3120,35 +3099,24 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_save_segment *save;
 	u32 ar;
 
 	if (vmx->rmode.vm86_active
 	    && (seg == VCPU_SREG_TR || seg == VCPU_SREG_ES
 		|| seg == VCPU_SREG_DS || seg == VCPU_SREG_FS
-		|| seg == VCPU_SREG_GS)
-	    && !emulate_invalid_guest_state) {
-		switch (seg) {
-		case VCPU_SREG_TR: save = &vmx->rmode.tr; break;
-		case VCPU_SREG_ES: save = &vmx->rmode.es; break;
-		case VCPU_SREG_DS: save = &vmx->rmode.ds; break;
-		case VCPU_SREG_FS: save = &vmx->rmode.fs; break;
-		case VCPU_SREG_GS: save = &vmx->rmode.gs; break;
-		default: BUG();
-		}
-		var->selector = save->selector;
-		var->base = save->base;
-		var->limit = save->limit;
-		ar = save->ar;
+		|| seg == VCPU_SREG_GS)) {
+		*var = vmx->rmode.segs[seg];
 		if (seg == VCPU_SREG_TR
 		    || var->selector == vmx_read_guest_seg_selector(vmx, seg))
-			goto use_saved_rmode_seg;
+			return;
+		var->base = vmx_read_guest_seg_base(vmx, seg);
+		var->selector = vmx_read_guest_seg_selector(vmx, seg);
+		return;
 	}
 	var->base = vmx_read_guest_seg_base(vmx, seg);
 	var->limit = vmx_read_guest_seg_limit(vmx, seg);
 	var->selector = vmx_read_guest_seg_selector(vmx, seg);
 	ar = vmx_read_guest_seg_ar(vmx, seg);
-use_saved_rmode_seg:
 	if ((ar & AR_UNUSABLE_MASK) && !emulate_invalid_guest_state)
 		ar = 0;
 	var->type = ar & 15;
@@ -3230,23 +3198,21 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
 	u32 ar;
 
 	vmx_segment_cache_clear(vmx);
 
 	if (vmx->rmode.vm86_active && seg == VCPU_SREG_TR) {
 		vmcs_write16(sf->selector, var->selector);
-		vmx->rmode.tr.selector = var->selector;
-		vmx->rmode.tr.base = var->base;
-		vmx->rmode.tr.limit = var->limit;
-		vmx->rmode.tr.ar = vmx_segment_access_rights(var);
+		vmx->rmode.segs[VCPU_SREG_TR] = *var;
 		return;
 	}
 	vmcs_writel(sf->base, var->base);
 	vmcs_write32(sf->limit, var->limit);
 	vmcs_write16(sf->selector, var->selector);
 	if (vmx->rmode.vm86_active && var->s) {
+		vmx->rmode.segs[seg] = *var;
 		/*
 		 * Hack real-mode segments into vm86 compatibility.
 		 */
@@ -3261,7 +3227,7 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 	 * qemu binaries.
 	 *   IA32 arch specifies that at the time of processor reset the
 	 * "Accessed" bit in the AR field of segment registers is 1. And qemu
-	 * is setting it to 0 in the usedland code. This causes invalid guest
+	 * is setting it to 0 in the userland code. This causes invalid guest
 	 * state vmexit when "unrestricted guest" mode is turned on.
 	 *    Fix for this setup issue in cpu_reset is being pushed in the qemu
 	 * tree. Newer qemu binaries with that qemu fix would not need this
@@ -3291,16 +3257,10 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 				     vmcs_readl(GUEST_CS_BASE) >> 4);
 			break;
 		case VCPU_SREG_ES:
-			fix_rmode_seg(VCPU_SREG_ES, &vmx->rmode.es);
-			break;
 		case VCPU_SREG_DS:
-			fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.ds);
-			break;
 		case VCPU_SREG_GS:
-			fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.gs);
-			break;
 		case VCPU_SREG_FS:
-			fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.fs);
+			fix_rmode_seg(seg, &vmx->rmode.segs[seg]);
 			break;
 		case VCPU_SREG_SS:
 			vmcs_write16(GUEST_SS_SELECTOR,
@@ -3354,9 +3314,9 @@ static bool rmode_segment_valid(struct kvm_vcpu *vcpu, int seg)
 
 	if (var.base != (var.selector << 4))
 		return false;
-	if (var.limit != 0xffff)
+	if (var.limit < 0xffff)
 		return false;
-	if (ar != 0xf3)
+	if (((ar | (3 << AR_DPL_SHIFT)) & ~(AR_G_MASK | AR_DB_MASK)) != 0xf3)
 		return false;
 
 	return true;
@@ -3608,7 +3568,7 @@ out:
 
 static void seg_setup(int seg)
 {
-	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
 	unsigned int ar;
 
 	vmcs_write16(sf->selector, 0);
@@ -3626,6 +3586,7 @@ static void seg_setup(int seg)
 
 static int alloc_apic_access_page(struct kvm *kvm)
 {
+	struct page *page;
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
@@ -3640,7 +3601,13 @@ static int alloc_apic_access_page(struct kvm *kvm)
 	if (r)
 		goto out;
 
-	kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
+	page = gfn_to_page(kvm, 0xfee00);
+	if (is_error_page(page)) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	kvm->arch.apic_access_page = page;
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
@@ -3648,6 +3615,7 @@ out:
 
 static int alloc_identity_pagetable(struct kvm *kvm)
 {
+	struct page *page;
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
@@ -3663,8 +3631,13 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 	if (r)
 		goto out;
 
-	kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
-			kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+	page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+	if (is_error_page(page)) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	kvm->arch.ept_identity_pagetable = page;
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
@@ -3737,7 +3710,7 @@ static void vmx_set_constant_host_state(void)
 	unsigned long tmpl;
 	struct desc_ptr dt;
 
-	vmcs_writel(HOST_CR0, read_cr0() | X86_CR0_TS);  /* 22.2.3 */
+	vmcs_writel(HOST_CR0, read_cr0() & ~X86_CR0_TS);  /* 22.2.3 */
 	vmcs_writel(HOST_CR4, read_cr4());  /* 22.2.3, 22.2.5 */
 	vmcs_writel(HOST_CR3, read_cr3());  /* 22.2.3  FIXME: shadow tables */
 
@@ -3760,8 +3733,7 @@ static void vmx_set_constant_host_state(void)
 	native_store_idt(&dt);
 	vmcs_writel(HOST_IDTR_BASE, dt.address);   /* 22.2.4 */
 
-	asm("mov $.Lkvm_vmx_return, %0" : "=r"(tmpl));
-	vmcs_writel(HOST_RIP, tmpl); /* 22.2.5 */
+	vmcs_writel(HOST_RIP, vmx_return); /* 22.2.5 */
 
 	rdmsr(MSR_IA32_SYSENTER_CS, low32, high32);
 	vmcs_write32(HOST_IA32_SYSENTER_CS, low32);
@@ -3995,8 +3967,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		kvm_rip_write(vcpu, 0);
 	kvm_register_write(vcpu, VCPU_REGS_RSP, 0);
 
-	vmcs_writel(GUEST_DR7, 0x400);
-
 	vmcs_writel(GUEST_GDTR_BASE, 0);
 	vmcs_write32(GUEST_GDTR_LIMIT, 0xffff);
 
@@ -4446,7 +4416,7 @@ vmx_patch_hypercall(struct kvm_vcpu *vcpu, unsigned char *hypercall)
 	hypercall[2] = 0xc1;
 }
 
-/* called to set cr0 as approriate for a mov-to-cr0 exit. */
+/* called to set cr0 as appropriate for a mov-to-cr0 exit. */
 static int handle_set_cr0(struct kvm_vcpu *vcpu, unsigned long val)
 {
 	if (to_vmx(vcpu)->nested.vmxon &&
@@ -4537,7 +4507,7 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 				vcpu->run->exit_reason = KVM_EXIT_SET_TPR;
 				return 0;
 			}
-		};
+		}
 		break;
 	case 2: /* clts */
 		handle_clts(vcpu);
@@ -5691,7 +5661,7 @@ static int handle_vmptrst(struct kvm_vcpu *vcpu)
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
  * to be done to userspace and return 0.
  */
-static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
+static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
 	[EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
 	[EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
@@ -6219,17 +6189,10 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
 					msrs[i].host);
 }
 
-#ifdef CONFIG_X86_64
-#define R "r"
-#define Q "q"
-#else
-#define R "e"
-#define Q "l"
-#endif
-
 static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	unsigned long debugctlmsr;
 
 	if (is_guest_mode(vcpu) && !vmx->nested.nested_run_pending) {
 		struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
@@ -6269,34 +6232,35 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		vmx_set_interrupt_shadow(vcpu, 0);
 
 	atomic_switch_perf_msrs(vmx);
+	debugctlmsr = get_debugctlmsr();
 
 	vmx->__launched = vmx->loaded_vmcs->launched;
 	asm(
 		/* Store host registers */
-		"push %%"R"dx; push %%"R"bp;"
-		"push %%"R"cx \n\t" /* placeholder for guest rcx */
-		"push %%"R"cx \n\t"
-		"cmp %%"R"sp, %c[host_rsp](%0) \n\t"
+		"push %%" _ASM_DX "; push %%" _ASM_BP ";"
+		"push %%" _ASM_CX " \n\t" /* placeholder for guest rcx */
+		"push %%" _ASM_CX " \n\t"
+		"cmp %%" _ASM_SP ", %c[host_rsp](%0) \n\t"
 		"je 1f \n\t"
-		"mov %%"R"sp, %c[host_rsp](%0) \n\t"
+		"mov %%" _ASM_SP ", %c[host_rsp](%0) \n\t"
 		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
 		"1: \n\t"
 		/* Reload cr2 if changed */
-		"mov %c[cr2](%0), %%"R"ax \n\t"
-		"mov %%cr2, %%"R"dx \n\t"
-		"cmp %%"R"ax, %%"R"dx \n\t"
+		"mov %c[cr2](%0), %%" _ASM_AX " \n\t"
+		"mov %%cr2, %%" _ASM_DX " \n\t"
+		"cmp %%" _ASM_AX ", %%" _ASM_DX " \n\t"
 		"je 2f \n\t"
-		"mov %%"R"ax, %%cr2 \n\t"
+		"mov %%" _ASM_AX", %%cr2 \n\t"
 		"2: \n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
-		"mov %c[rax](%0), %%"R"ax \n\t"
-		"mov %c[rbx](%0), %%"R"bx \n\t"
-		"mov %c[rdx](%0), %%"R"dx \n\t"
-		"mov %c[rsi](%0), %%"R"si \n\t"
-		"mov %c[rdi](%0), %%"R"di \n\t"
-		"mov %c[rbp](%0), %%"R"bp \n\t"
+		"mov %c[rax](%0), %%" _ASM_AX " \n\t"
+		"mov %c[rbx](%0), %%" _ASM_BX " \n\t"
+		"mov %c[rdx](%0), %%" _ASM_DX " \n\t"
+		"mov %c[rsi](%0), %%" _ASM_SI " \n\t"
+		"mov %c[rdi](%0), %%" _ASM_DI " \n\t"
+		"mov %c[rbp](%0), %%" _ASM_BP " \n\t"
 #ifdef CONFIG_X86_64
 		"mov %c[r8](%0),  %%r8  \n\t"
 		"mov %c[r9](%0),  %%r9  \n\t"
@@ -6307,24 +6271,24 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		"mov %c[r14](%0), %%r14 \n\t"
 		"mov %c[r15](%0), %%r15 \n\t"
 #endif
-		"mov %c[rcx](%0), %%"R"cx \n\t" /* kills %0 (ecx) */
+		"mov %c[rcx](%0), %%" _ASM_CX " \n\t" /* kills %0 (ecx) */
 
 		/* Enter guest mode */
-		"jne .Llaunched \n\t"
+		"jne 1f \n\t"
 		__ex(ASM_VMX_VMLAUNCH) "\n\t"
-		"jmp .Lkvm_vmx_return \n\t"
-		".Llaunched: " __ex(ASM_VMX_VMRESUME) "\n\t"
-		".Lkvm_vmx_return: "
+		"jmp 2f \n\t"
+		"1: " __ex(ASM_VMX_VMRESUME) "\n\t"
+		"2: "
 		/* Save guest registers, load host registers, keep flags */
-		"mov %0, %c[wordsize](%%"R"sp) \n\t"
+		"mov %0, %c[wordsize](%%" _ASM_SP ") \n\t"
 		"pop %0 \n\t"
-		"mov %%"R"ax, %c[rax](%0) \n\t"
-		"mov %%"R"bx, %c[rbx](%0) \n\t"
-		"pop"Q" %c[rcx](%0) \n\t"
-		"mov %%"R"dx, %c[rdx](%0) \n\t"
-		"mov %%"R"si, %c[rsi](%0) \n\t"
-		"mov %%"R"di, %c[rdi](%0) \n\t"
-		"mov %%"R"bp, %c[rbp](%0) \n\t"
+		"mov %%" _ASM_AX ", %c[rax](%0) \n\t"
+		"mov %%" _ASM_BX ", %c[rbx](%0) \n\t"
+		__ASM_SIZE(pop) " %c[rcx](%0) \n\t"
+		"mov %%" _ASM_DX ", %c[rdx](%0) \n\t"
+		"mov %%" _ASM_SI ", %c[rsi](%0) \n\t"
+		"mov %%" _ASM_DI ", %c[rdi](%0) \n\t"
+		"mov %%" _ASM_BP ", %c[rbp](%0) \n\t"
 #ifdef CONFIG_X86_64
 		"mov %%r8,  %c[r8](%0) \n\t"
 		"mov %%r9,  %c[r9](%0) \n\t"
@@ -6335,11 +6299,15 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		"mov %%r14, %c[r14](%0) \n\t"
 		"mov %%r15, %c[r15](%0) \n\t"
 #endif
-		"mov %%cr2, %%"R"ax   \n\t"
-		"mov %%"R"ax, %c[cr2](%0) \n\t"
+		"mov %%cr2, %%" _ASM_AX "   \n\t"
+		"mov %%" _ASM_AX ", %c[cr2](%0) \n\t"
 
-		"pop  %%"R"bp; pop  %%"R"dx \n\t"
+		"pop  %%" _ASM_BP "; pop  %%" _ASM_DX " \n\t"
 		"setbe %c[fail](%0) \n\t"
+		".pushsection .rodata \n\t"
+		".global vmx_return \n\t"
+		"vmx_return: " _ASM_PTR " 2b \n\t"
+		".popsection"
 	      : : "c"(vmx), "d"((unsigned long)HOST_RSP),
 		[launched]"i"(offsetof(struct vcpu_vmx, __launched)),
 		[fail]"i"(offsetof(struct vcpu_vmx, fail)),
@@ -6364,12 +6332,31 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		[cr2]"i"(offsetof(struct vcpu_vmx, vcpu.arch.cr2)),
 		[wordsize]"i"(sizeof(ulong))
 	      : "cc", "memory"
-		, R"ax", R"bx", R"di", R"si"
 #ifdef CONFIG_X86_64
+		, "rax", "rbx", "rdi", "rsi"
 		, "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15"
+#else
+		, "eax", "ebx", "edi", "esi"
 #endif
 	      );
 
+	/* MSR_IA32_DEBUGCTLMSR is zeroed on vmexit. Restore it if needed */
+	if (debugctlmsr)
+		update_debugctlmsr(debugctlmsr);
+
+#ifndef CONFIG_X86_64
+	/*
+	 * The sysexit path does not restore ds/es, so we must set them to
+	 * a reasonable value ourselves.
+	 *
+	 * We can't defer this to vmx_load_host_state() since that function
+	 * may be executed in interrupt context, which saves and restore segments
+	 * around it, nullifying its effect.
+	 */
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
+#endif
+
 	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
 				  | (1 << VCPU_EXREG_RFLAGS)
 				  | (1 << VCPU_EXREG_CPL)
@@ -6401,9 +6388,6 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	vmx_complete_interrupts(vmx);
 }
 
-#undef R
-#undef Q
-
 static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -6569,7 +6553,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 	/* Exposing INVPCID only when PCID is exposed */
 	best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
 	if (vmx_invpcid_supported() &&
-	    best && (best->ecx & bit(X86_FEATURE_INVPCID)) &&
+	    best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
 	    guest_cpuid_has_pcid(vcpu)) {
 		exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
@@ -6579,7 +6563,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
 			     exec_control);
 		if (best)
-			best->ecx &= ~bit(X86_FEATURE_INVPCID);
+			best->ebx &= ~bit(X86_FEATURE_INVPCID);
 	}
 }
 
@@ -7258,7 +7242,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.vcpu_load = vmx_vcpu_load,
 	.vcpu_put = vmx_vcpu_put,
 
-	.set_guest_debug = set_guest_debug,
+	.update_db_bp_intercept = update_exception_bitmap,
 	.get_msr = vmx_get_msr,
 	.set_msr = vmx_set_msr,
 	.get_segment_base = vmx_get_segment_base,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 59b59508ff07..1eefebe5d727 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -246,20 +246,14 @@ static void drop_user_return_notifiers(void *ignore)
 
 u64 kvm_get_apic_base(struct kvm_vcpu *vcpu)
 {
-	if (irqchip_in_kernel(vcpu->kvm))
-		return vcpu->arch.apic_base;
-	else
-		return vcpu->arch.apic_base;
+	return vcpu->arch.apic_base;
 }
 EXPORT_SYMBOL_GPL(kvm_get_apic_base);
 
 void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data)
 {
 	/* TODO: reserve bits check */
-	if (irqchip_in_kernel(vcpu->kvm))
-		kvm_lapic_set_base(vcpu, data);
-	else
-		vcpu->arch.apic_base = data;
+	kvm_lapic_set_base(vcpu, data);
 }
 EXPORT_SYMBOL_GPL(kvm_set_apic_base);
 
@@ -698,6 +692,18 @@ unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_get_cr8);
 
+static void kvm_update_dr7(struct kvm_vcpu *vcpu)
+{
+	unsigned long dr7;
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
+		dr7 = vcpu->arch.guest_debug_dr7;
+	else
+		dr7 = vcpu->arch.dr7;
+	kvm_x86_ops->set_dr7(vcpu, dr7);
+	vcpu->arch.switch_db_regs = (dr7 & DR7_BP_EN_MASK);
+}
+
 static int __kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 {
 	switch (dr) {
@@ -723,10 +729,7 @@ static int __kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 		if (val & 0xffffffff00000000ULL)
 			return -1; /* #GP */
 		vcpu->arch.dr7 = (val & DR7_VOLATILE) | DR7_FIXED_1;
-		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
-			kvm_x86_ops->set_dr7(vcpu, vcpu->arch.dr7);
-			vcpu->arch.switch_db_regs = (val & DR7_BP_EN_MASK);
-		}
+		kvm_update_dr7(vcpu);
 		break;
 	}
 
@@ -806,7 +809,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
  * kvm-specific. Those are put in the beginning of the list.
  */
 
-#define KVM_SAVE_MSRS_BEGIN	9
+#define KVM_SAVE_MSRS_BEGIN	10
 static u32 msrs_to_save[] = {
 	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
@@ -823,7 +826,7 @@ static u32 msrs_to_save[] = {
 
 static unsigned num_msrs_to_save;
 
-static u32 emulated_msrs[] = {
+static const u32 emulated_msrs[] = {
 	MSR_IA32_TSCDEADLINE,
 	MSR_IA32_MISC_ENABLE,
 	MSR_IA32_MCG_STATUS,
@@ -925,6 +928,10 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 	 */
 	getboottime(&boot);
 
+	if (kvm->arch.kvmclock_offset) {
+		struct timespec ts = ns_to_timespec(kvm->arch.kvmclock_offset);
+		boot = timespec_sub(boot, ts);
+	}
 	wc.sec = boot.tv_sec;
 	wc.nsec = boot.tv_nsec;
 	wc.version = version;
@@ -1093,7 +1100,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, u64 data)
 		 * For each generation, we track the original measured
 		 * nanosecond time, offset, and write, so if TSCs are in
 		 * sync, we can match exact offset, and if not, we can match
-		 * exact software computaion in compute_guest_tsc()
+		 * exact software computation in compute_guest_tsc()
 		 *
 		 * These values are tracked in kvm->arch.cur_xxx variables.
 		 */
@@ -1136,6 +1143,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	unsigned long this_tsc_khz;
 	s64 kernel_ns, max_kernel_ns;
 	u64 tsc_timestamp;
+	u8 pvclock_flags;
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
@@ -1217,7 +1225,14 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	vcpu->hv_clock.system_time = kernel_ns + v->kvm->arch.kvmclock_offset;
 	vcpu->last_kernel_ns = kernel_ns;
 	vcpu->last_guest_tsc = tsc_timestamp;
-	vcpu->hv_clock.flags = 0;
+
+	pvclock_flags = 0;
+	if (vcpu->pvclock_set_guest_stopped_request) {
+		pvclock_flags |= PVCLOCK_GUEST_STOPPED;
+		vcpu->pvclock_set_guest_stopped_request = false;
+	}
+
+	vcpu->hv_clock.flags = pvclock_flags;
 
 	/*
 	 * The interface expects us to write an even number signaling that the
@@ -1500,7 +1515,7 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data)
 {
 	gpa_t gpa = data & ~0x3f;
 
-	/* Bits 2:5 are resrved, Should be zero */
+	/* Bits 2:5 are reserved, Should be zero */
 	if (data & 0x3c)
 		return 1;
 
@@ -1635,10 +1650,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		vcpu->arch.time_page =
 				gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
 
-		if (is_error_page(vcpu->arch.time_page)) {
-			kvm_release_page_clean(vcpu->arch.time_page);
+		if (is_error_page(vcpu->arch.time_page))
 			vcpu->arch.time_page = NULL;
-		}
+
 		break;
 	}
 	case MSR_KVM_ASYNC_PF_EN:
@@ -1723,7 +1737,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		 * Ignore all writes to this no longer documented MSR.
 		 * Writes are only relevant for old K7 processors,
 		 * all pre-dating SVM, but a recommended workaround from
-		 * AMD for these chips. It is possible to speicify the
+		 * AMD for these chips. It is possible to specify the
 		 * affected processor models on the command line, hence
 		 * the need to ignore the workaround.
 		 */
@@ -1996,6 +2010,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_KVM_STEAL_TIME:
 		data = vcpu->arch.st.msr_val;
 		break;
+	case MSR_KVM_PV_EOI_EN:
+		data = vcpu->arch.pv_eoi.msr_val;
+		break;
 	case MSR_IA32_P5_MC_ADDR:
 	case MSR_IA32_P5_MC_TYPE:
 	case MSR_IA32_MCG_CAP:
@@ -2170,6 +2187,8 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_GET_TSC_KHZ:
 	case KVM_CAP_PCI_2_3:
 	case KVM_CAP_KVMCLOCK_CTRL:
+	case KVM_CAP_READONLY_MEM:
+	case KVM_CAP_IRQFD_RESAMPLE:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -2351,8 +2370,7 @@ static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu,
 static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
 				    struct kvm_lapic_state *s)
 {
-	memcpy(vcpu->arch.apic->regs, s->regs, sizeof *s);
-	kvm_apic_post_state_restore(vcpu);
+	kvm_apic_post_state_restore(vcpu, s);
 	update_cr8_intercept(vcpu);
 
 	return 0;
@@ -2361,7 +2379,7 @@ static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
 static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 				    struct kvm_interrupt *irq)
 {
-	if (irq->irq < 0 || irq->irq >= 256)
+	if (irq->irq < 0 || irq->irq >= KVM_NR_INTERRUPTS)
 		return -EINVAL;
 	if (irqchip_in_kernel(vcpu->kvm))
 		return -ENXIO;
@@ -2628,11 +2646,9 @@ static int kvm_vcpu_ioctl_x86_set_xcrs(struct kvm_vcpu *vcpu,
  */
 static int kvm_set_guest_paused(struct kvm_vcpu *vcpu)
 {
-	struct pvclock_vcpu_time_info *src = &vcpu->arch.hv_clock;
 	if (!vcpu->arch.time_page)
 		return -EINVAL;
-	src->flags |= PVCLOCK_GUEST_STOPPED;
-	mark_page_dirty(vcpu->kvm, vcpu->arch.time >> PAGE_SHIFT);
+	vcpu->arch.pvclock_set_guest_stopped_request = true;
 	kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
 	return 0;
 }
@@ -3083,7 +3099,7 @@ static int kvm_vm_ioctl_reinject(struct kvm *kvm,
 	if (!kvm->arch.vpit)
 		return -ENXIO;
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
-	kvm->arch.vpit->pit_state.pit_timer.reinject = control->pit_reinject;
+	kvm->arch.vpit->pit_state.reinject = control->pit_reinject;
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return 0;
 }
@@ -3166,6 +3182,16 @@ out:
 	return r;
 }
 
+int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_event)
+{
+	if (!irqchip_in_kernel(kvm))
+		return -ENXIO;
+
+	irq_event->status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
+					irq_event->irq, irq_event->level);
+	return 0;
+}
+
 long kvm_arch_vm_ioctl(struct file *filp,
 		       unsigned int ioctl, unsigned long arg)
 {
@@ -3272,29 +3298,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	create_pit_unlock:
 		mutex_unlock(&kvm->slots_lock);
 		break;
-	case KVM_IRQ_LINE_STATUS:
-	case KVM_IRQ_LINE: {
-		struct kvm_irq_level irq_event;
-
-		r = -EFAULT;
-		if (copy_from_user(&irq_event, argp, sizeof irq_event))
-			goto out;
-		r = -ENXIO;
-		if (irqchip_in_kernel(kvm)) {
-			__s32 status;
-			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
-					irq_event.irq, irq_event.level);
-			if (ioctl == KVM_IRQ_LINE_STATUS) {
-				r = -EFAULT;
-				irq_event.status = status;
-				if (copy_to_user(argp, &irq_event,
-							sizeof irq_event))
-					goto out;
-			}
-			r = 0;
-		}
-		break;
-	}
 	case KVM_GET_IRQCHIP: {
 		/* 0: PIC master, 1: PIC slave, 2: IOAPIC */
 		struct kvm_irqchip *chip;
@@ -3682,20 +3685,17 @@ static int vcpu_mmio_gva_to_gpa(struct kvm_vcpu *vcpu, unsigned long gva,
 				gpa_t *gpa, struct x86_exception *exception,
 				bool write)
 {
-	u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
+	u32 access = ((kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0)
+		| (write ? PFERR_WRITE_MASK : 0);
 
-	if (vcpu_match_mmio_gva(vcpu, gva) &&
-		  check_write_user_access(vcpu, write, access,
-		  vcpu->arch.access)) {
+	if (vcpu_match_mmio_gva(vcpu, gva)
+	    && !permission_fault(vcpu->arch.walk_mmu, vcpu->arch.access, access)) {
 		*gpa = vcpu->arch.mmio_gfn << PAGE_SHIFT |
 					(gva & (PAGE_SIZE - 1));
 		trace_vcpu_match_mmio(gva, *gpa, write, false);
 		return 1;
 	}
 
-	if (write)
-		access |= PFERR_WRITE_MASK;
-
 	*gpa = vcpu->arch.walk_mmu->gva_to_gpa(vcpu, gva, access, exception);
 
 	if (*gpa == UNMAPPED_GVA)
@@ -3783,14 +3783,14 @@ static int write_exit_mmio(struct kvm_vcpu *vcpu, gpa_t gpa,
 	return X86EMUL_CONTINUE;
 }
 
-static struct read_write_emulator_ops read_emultor = {
+static const struct read_write_emulator_ops read_emultor = {
 	.read_write_prepare = read_prepare,
 	.read_write_emulate = read_emulate,
 	.read_write_mmio = vcpu_mmio_read,
 	.read_write_exit_mmio = read_exit_mmio,
 };
 
-static struct read_write_emulator_ops write_emultor = {
+static const struct read_write_emulator_ops write_emultor = {
 	.read_write_emulate = write_emulate,
 	.read_write_mmio = write_mmio,
 	.read_write_exit_mmio = write_exit_mmio,
@@ -3801,7 +3801,7 @@ static int emulator_read_write_onepage(unsigned long addr, void *val,
 				       unsigned int bytes,
 				       struct x86_exception *exception,
 				       struct kvm_vcpu *vcpu,
-				       struct read_write_emulator_ops *ops)
+				       const struct read_write_emulator_ops *ops)
 {
 	gpa_t gpa;
 	int handled, ret;
@@ -3850,7 +3850,7 @@ mmio:
 int emulator_read_write(struct x86_emulate_ctxt *ctxt, unsigned long addr,
 			void *val, unsigned int bytes,
 			struct x86_exception *exception,
-			struct read_write_emulator_ops *ops)
+			const struct read_write_emulator_ops *ops)
 {
 	struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
 	gpa_t gpa;
@@ -3955,10 +3955,8 @@ static int emulator_cmpxchg_emulated(struct x86_emulate_ctxt *ctxt,
 		goto emul_write;
 
 	page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
-	if (is_error_page(page)) {
-		kvm_release_page_clean(page);
+	if (is_error_page(page))
 		goto emul_write;
-	}
 
 	kaddr = kmap_atomic(page);
 	kaddr += offset_in_page(gpa);
@@ -4325,7 +4323,19 @@ static void emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
 	kvm_cpuid(emul_to_vcpu(ctxt), eax, ebx, ecx, edx);
 }
 
-static struct x86_emulate_ops emulate_ops = {
+static ulong emulator_read_gpr(struct x86_emulate_ctxt *ctxt, unsigned reg)
+{
+	return kvm_register_read(emul_to_vcpu(ctxt), reg);
+}
+
+static void emulator_write_gpr(struct x86_emulate_ctxt *ctxt, unsigned reg, ulong val)
+{
+	kvm_register_write(emul_to_vcpu(ctxt), reg, val);
+}
+
+static const struct x86_emulate_ops emulate_ops = {
+	.read_gpr            = emulator_read_gpr,
+	.write_gpr           = emulator_write_gpr,
 	.read_std            = kvm_read_guest_virt_system,
 	.write_std           = kvm_write_guest_virt_system,
 	.fetch               = kvm_fetch_guest_virt,
@@ -4360,14 +4370,6 @@ static struct x86_emulate_ops emulate_ops = {
 	.get_cpuid           = emulator_get_cpuid,
 };
 
-static void cache_all_regs(struct kvm_vcpu *vcpu)
-{
-	kvm_register_read(vcpu, VCPU_REGS_RAX);
-	kvm_register_read(vcpu, VCPU_REGS_RSP);
-	kvm_register_read(vcpu, VCPU_REGS_RIP);
-	vcpu->arch.regs_dirty = ~0;
-}
-
 static void toggle_interruptibility(struct kvm_vcpu *vcpu, u32 mask)
 {
 	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(vcpu, mask);
@@ -4394,12 +4396,10 @@ static void inject_emulated_exception(struct kvm_vcpu *vcpu)
 		kvm_queue_exception(vcpu, ctxt->exception.vector);
 }
 
-static void init_decode_cache(struct x86_emulate_ctxt *ctxt,
-			      const unsigned long *regs)
+static void init_decode_cache(struct x86_emulate_ctxt *ctxt)
 {
 	memset(&ctxt->twobyte, 0,
-	       (void *)&ctxt->regs - (void *)&ctxt->twobyte);
-	memcpy(ctxt->regs, regs, sizeof(ctxt->regs));
+	       (void *)&ctxt->_regs - (void *)&ctxt->twobyte);
 
 	ctxt->fetch.start = 0;
 	ctxt->fetch.end = 0;
@@ -4414,14 +4414,6 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu)
 	struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt;
 	int cs_db, cs_l;
 
-	/*
-	 * TODO: fix emulate.c to use guest_read/write_register
-	 * instead of direct ->regs accesses, can save hundred cycles
-	 * on Intel for instructions that don't read/change RSP, for
-	 * for example.
-	 */
-	cache_all_regs(vcpu);
-
 	kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 
 	ctxt->eflags = kvm_get_rflags(vcpu);
@@ -4433,7 +4425,7 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu)
 							  X86EMUL_MODE_PROT16;
 	ctxt->guest_mode = is_guest_mode(vcpu);
 
-	init_decode_cache(ctxt, vcpu->arch.regs);
+	init_decode_cache(ctxt);
 	vcpu->arch.emulate_regs_need_sync_from_vcpu = false;
 }
 
@@ -4453,7 +4445,6 @@ int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq, int inc_eip)
 		return EMULATE_FAIL;
 
 	ctxt->eip = ctxt->_eip;
-	memcpy(vcpu->arch.regs, ctxt->regs, sizeof ctxt->regs);
 	kvm_rip_write(vcpu, ctxt->eip);
 	kvm_set_rflags(vcpu, ctxt->eflags);
 
@@ -4486,13 +4477,14 @@ static int handle_emulation_failure(struct kvm_vcpu *vcpu)
 static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t gva)
 {
 	gpa_t gpa;
+	pfn_t pfn;
 
 	if (tdp_enabled)
 		return false;
 
 	/*
 	 * if emulation was due to access to shadowed page table
-	 * and it failed try to unshadow page and re-entetr the
+	 * and it failed try to unshadow page and re-enter the
 	 * guest to let CPU execute the instruction.
 	 */
 	if (kvm_mmu_unprotect_page_virt(vcpu, gva))
@@ -4503,8 +4495,17 @@ static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t gva)
 	if (gpa == UNMAPPED_GVA)
 		return true; /* let cpu generate fault */
 
-	if (!kvm_is_error_hva(gfn_to_hva(vcpu->kvm, gpa >> PAGE_SHIFT)))
+	/*
+	 * Do not retry the unhandleable instruction if it faults on the
+	 * readonly host memory, otherwise it will goto a infinite loop:
+	 * retry instruction -> write #PF -> emulation fail -> retry
+	 * instruction -> ...
+	 */
+	pfn = gfn_to_pfn(vcpu->kvm, gpa_to_gfn(gpa));
+	if (!is_error_pfn(pfn)) {
+		kvm_release_pfn_clean(pfn);
 		return true;
+	}
 
 	return false;
 }
@@ -4553,6 +4554,9 @@ static bool retry_instruction(struct x86_emulate_ctxt *ctxt,
 	return true;
 }
 
+static int complete_emulated_mmio(struct kvm_vcpu *vcpu);
+static int complete_emulated_pio(struct kvm_vcpu *vcpu);
+
 int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 			    unsigned long cr2,
 			    int emulation_type,
@@ -4601,7 +4605,7 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 	   changes registers values  during IO operation */
 	if (vcpu->arch.emulate_regs_need_sync_from_vcpu) {
 		vcpu->arch.emulate_regs_need_sync_from_vcpu = false;
-		memcpy(ctxt->regs, vcpu->arch.regs, sizeof ctxt->regs);
+		emulator_invalidate_register_cache(ctxt);
 	}
 
 restart:
@@ -4623,13 +4627,16 @@ restart:
 	} else if (vcpu->arch.pio.count) {
 		if (!vcpu->arch.pio.in)
 			vcpu->arch.pio.count = 0;
-		else
+		else {
 			writeback = false;
+			vcpu->arch.complete_userspace_io = complete_emulated_pio;
+		}
 		r = EMULATE_DO_MMIO;
 	} else if (vcpu->mmio_needed) {
 		if (!vcpu->mmio_is_write)
 			writeback = false;
 		r = EMULATE_DO_MMIO;
+		vcpu->arch.complete_userspace_io = complete_emulated_mmio;
 	} else if (r == EMULATION_RESTART)
 		goto restart;
 	else
@@ -4639,7 +4646,6 @@ restart:
 		toggle_interruptibility(vcpu, ctxt->interruptibility);
 		kvm_set_rflags(vcpu, ctxt->eflags);
 		kvm_make_request(KVM_REQ_EVENT, vcpu);
-		memcpy(vcpu->arch.regs, ctxt->regs, sizeof ctxt->regs);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
 		kvm_rip_write(vcpu, ctxt->eip);
 	} else
@@ -4922,6 +4928,7 @@ int kvm_arch_init(void *opaque)
 	if (cpu_has_xsave)
 		host_xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
 
+	kvm_lapic_init();
 	return 0;
 
 out:
@@ -5106,17 +5113,20 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 			!kvm_event_needs_reinjection(vcpu);
 }
 
-static void vapic_enter(struct kvm_vcpu *vcpu)
+static int vapic_enter(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	struct page *page;
 
 	if (!apic || !apic->vapic_addr)
-		return;
+		return 0;
 
 	page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+	if (is_error_page(page))
+		return -EFAULT;
 
 	vcpu->arch.apic->vapic_page = page;
+	return 0;
 }
 
 static void vapic_exit(struct kvm_vcpu *vcpu)
@@ -5423,7 +5433,11 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 	}
 
 	vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
-	vapic_enter(vcpu);
+	r = vapic_enter(vcpu);
+	if (r) {
+		srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
+		return r;
+	}
 
 	r = 1;
 	while (r > 0) {
@@ -5485,6 +5499,24 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 	return r;
 }
 
+static inline int complete_emulated_io(struct kvm_vcpu *vcpu)
+{
+	int r;
+	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
+	r = emulate_instruction(vcpu, EMULTYPE_NO_DECODE);
+	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
+	if (r != EMULATE_DONE)
+		return 0;
+	return 1;
+}
+
+static int complete_emulated_pio(struct kvm_vcpu *vcpu)
+{
+	BUG_ON(!vcpu->arch.pio.count);
+
+	return complete_emulated_io(vcpu);
+}
+
 /*
  * Implements the following, as a state machine:
  *
@@ -5501,47 +5533,37 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
  *      copy data
  *      exit
  */
-static int complete_mmio(struct kvm_vcpu *vcpu)
+static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 	struct kvm_mmio_fragment *frag;
-	int r;
 
-	if (!(vcpu->arch.pio.count || vcpu->mmio_needed))
-		return 1;
+	BUG_ON(!vcpu->mmio_needed);
 
-	if (vcpu->mmio_needed) {
-		/* Complete previous fragment */
-		frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++];
-		if (!vcpu->mmio_is_write)
-			memcpy(frag->data, run->mmio.data, frag->len);
-		if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
-			vcpu->mmio_needed = 0;
-			if (vcpu->mmio_is_write)
-				return 1;
-			vcpu->mmio_read_completed = 1;
-			goto done;
-		}
-		/* Initiate next fragment */
-		++frag;
-		run->exit_reason = KVM_EXIT_MMIO;
-		run->mmio.phys_addr = frag->gpa;
+	/* Complete previous fragment */
+	frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++];
+	if (!vcpu->mmio_is_write)
+		memcpy(frag->data, run->mmio.data, frag->len);
+	if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
+		vcpu->mmio_needed = 0;
 		if (vcpu->mmio_is_write)
-			memcpy(run->mmio.data, frag->data, frag->len);
-		run->mmio.len = frag->len;
-		run->mmio.is_write = vcpu->mmio_is_write;
-		return 0;
-
-	}
-done:
-	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
-	r = emulate_instruction(vcpu, EMULTYPE_NO_DECODE);
-	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
-	if (r != EMULATE_DONE)
-		return 0;
-	return 1;
+			return 1;
+		vcpu->mmio_read_completed = 1;
+		return complete_emulated_io(vcpu);
+	}
+	/* Initiate next fragment */
+	++frag;
+	run->exit_reason = KVM_EXIT_MMIO;
+	run->mmio.phys_addr = frag->gpa;
+	if (vcpu->mmio_is_write)
+		memcpy(run->mmio.data, frag->data, frag->len);
+	run->mmio.len = frag->len;
+	run->mmio.is_write = vcpu->mmio_is_write;
+	vcpu->arch.complete_userspace_io = complete_emulated_mmio;
+	return 0;
 }
 
+
 int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	int r;
@@ -5568,9 +5590,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		}
 	}
 
-	r = complete_mmio(vcpu);
-	if (r <= 0)
-		goto out;
+	if (unlikely(vcpu->arch.complete_userspace_io)) {
+		int (*cui)(struct kvm_vcpu *) = vcpu->arch.complete_userspace_io;
+		vcpu->arch.complete_userspace_io = NULL;
+		r = cui(vcpu);
+		if (r <= 0)
+			goto out;
+	} else
+		WARN_ON(vcpu->arch.pio.count || vcpu->mmio_needed);
 
 	r = __vcpu_run(vcpu);
 
@@ -5588,12 +5615,11 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 		/*
 		 * We are here if userspace calls get_regs() in the middle of
 		 * instruction emulation. Registers state needs to be copied
-		 * back from emulation context to vcpu. Usrapace shouldn't do
+		 * back from emulation context to vcpu. Userspace shouldn't do
 		 * that usually, but some bad designed PV devices (vmware
 		 * backdoor interface) need this to work
 		 */
-		struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt;
-		memcpy(vcpu->arch.regs, ctxt->regs, sizeof ctxt->regs);
+		emulator_writeback_register_cache(&vcpu->arch.emulate_ctxt);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
 	}
 	regs->rax = kvm_register_read(vcpu, VCPU_REGS_RAX);
@@ -5733,7 +5759,6 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int idt_index,
 	if (ret)
 		return EMULATE_FAIL;
 
-	memcpy(vcpu->arch.regs, ctxt->regs, sizeof ctxt->regs);
 	kvm_rip_write(vcpu, ctxt->eip);
 	kvm_set_rflags(vcpu, ctxt->eflags);
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
@@ -5785,7 +5810,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	if (mmu_reset_needed)
 		kvm_mmu_reset_context(vcpu);
 
-	max_bits = (sizeof sregs->interrupt_bitmap) << 3;
+	max_bits = KVM_NR_INTERRUPTS;
 	pending_vec = find_first_bit(
 		(const unsigned long *)sregs->interrupt_bitmap, max_bits);
 	if (pending_vec < max_bits) {
@@ -5845,13 +5870,12 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
 		for (i = 0; i < KVM_NR_DB_REGS; ++i)
 			vcpu->arch.eff_db[i] = dbg->arch.debugreg[i];
-		vcpu->arch.switch_db_regs =
-			(dbg->arch.debugreg[7] & DR7_BP_EN_MASK);
+		vcpu->arch.guest_debug_dr7 = dbg->arch.debugreg[7];
 	} else {
 		for (i = 0; i < KVM_NR_DB_REGS; i++)
 			vcpu->arch.eff_db[i] = vcpu->arch.db[i];
-		vcpu->arch.switch_db_regs = (vcpu->arch.dr7 & DR7_BP_EN_MASK);
 	}
+	kvm_update_dr7(vcpu);
 
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		vcpu->arch.singlestep_rip = kvm_rip_read(vcpu) +
@@ -5863,7 +5887,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	 */
 	kvm_set_rflags(vcpu, rflags);
 
-	kvm_x86_ops->set_guest_debug(vcpu, dbg);
+	kvm_x86_ops->update_db_bp_intercept(vcpu);
 
 	r = 0;
 
@@ -5965,7 +5989,7 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 	 */
 	kvm_put_guest_xcr0(vcpu);
 	vcpu->guest_fpu_loaded = 1;
-	unlazy_fpu(current);
+	__kernel_fpu_begin();
 	fpu_restore_checking(&vcpu->arch.guest_fpu);
 	trace_kvm_fpu(1);
 }
@@ -5979,6 +6003,7 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 
 	vcpu->guest_fpu_loaded = 0;
 	fpu_save_init(&vcpu->arch.guest_fpu);
+	__kernel_fpu_end();
 	++vcpu->stat.fpu_reload;
 	kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu);
 	trace_kvm_fpu(0);
@@ -6008,7 +6033,9 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	int r;
 
 	vcpu->arch.mtrr_state.have_fixed = 1;
-	vcpu_load(vcpu);
+	r = vcpu_load(vcpu);
+	if (r)
+		return r;
 	r = kvm_arch_vcpu_reset(vcpu);
 	if (r == 0)
 		r = kvm_mmu_setup(vcpu);
@@ -6019,9 +6046,11 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
+	int r;
 	vcpu->arch.apf.msr_val = 0;
 
-	vcpu_load(vcpu);
+	r = vcpu_load(vcpu);
+	BUG_ON(r);
 	kvm_mmu_unload(vcpu);
 	vcpu_put(vcpu);
 
@@ -6035,10 +6064,10 @@ int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.nmi_pending = 0;
 	vcpu->arch.nmi_injected = false;
 
-	vcpu->arch.switch_db_regs = 0;
 	memset(vcpu->arch.db, 0, sizeof(vcpu->arch.db));
 	vcpu->arch.dr6 = DR6_FIXED_1;
 	vcpu->arch.dr7 = DR7_FIXED_1;
+	kvm_update_dr7(vcpu);
 
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
 	vcpu->arch.apf.msr_val = 0;
@@ -6117,7 +6146,7 @@ int kvm_arch_hardware_enable(void *garbage)
 	 * as we reset last_host_tsc on all VCPUs to stop this from being
 	 * called multiple times (one for each physical CPU bringup).
 	 *
-	 * Platforms with unnreliable TSCs don't have to deal with this, they
+	 * Platforms with unreliable TSCs don't have to deal with this, they
 	 * will be compensated by the logic in vcpu_load, which sets the TSC to
 	 * catchup mode.  This will catchup all VCPUs to real time, but cannot
 	 * guarantee that they stay in perfect synchronization.
@@ -6170,6 +6199,8 @@ bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu)
 	return irqchip_in_kernel(vcpu->kvm) == (vcpu->arch.apic != NULL);
 }
 
+struct static_key kvm_no_apic_vcpu __read_mostly;
+
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 {
 	struct page *page;
@@ -6202,7 +6233,8 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 		r = kvm_create_lapic(vcpu);
 		if (r < 0)
 			goto fail_mmu_destroy;
-	}
+	} else
+		static_key_slow_inc(&kvm_no_apic_vcpu);
 
 	vcpu->arch.mce_banks = kzalloc(KVM_MAX_MCE_BANKS * sizeof(u64) * 4,
 				       GFP_KERNEL);
@@ -6242,6 +6274,8 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 	kvm_mmu_destroy(vcpu);
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	free_page((unsigned long)vcpu->arch.pio_data);
+	if (!irqchip_in_kernel(vcpu->kvm))
+		static_key_slow_dec(&kvm_no_apic_vcpu);
 }
 
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
@@ -6254,15 +6288,21 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 
 	/* Reserve bit 0 of irq_sources_bitmap for userspace irq source */
 	set_bit(KVM_USERSPACE_IRQ_SOURCE_ID, &kvm->arch.irq_sources_bitmap);
+	/* Reserve bit 1 of irq_sources_bitmap for irqfd-resampler */
+	set_bit(KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID,
+		&kvm->arch.irq_sources_bitmap);
 
 	raw_spin_lock_init(&kvm->arch.tsc_write_lock);
+	mutex_init(&kvm->arch.apic_map_lock);
 
 	return 0;
 }
 
 static void kvm_unload_vcpu_mmu(struct kvm_vcpu *vcpu)
 {
-	vcpu_load(vcpu);
+	int r;
+	r = vcpu_load(vcpu);
+	BUG_ON(r);
 	kvm_mmu_unload(vcpu);
 	vcpu_put(vcpu);
 }
@@ -6306,6 +6346,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 		put_page(kvm->arch.apic_access_page);
 	if (kvm->arch.ept_identity_pagetable)
 		put_page(kvm->arch.ept_identity_pagetable);
+	kfree(rcu_dereference_check(kvm->arch.apic_map, 1));
 }
 
 void kvm_arch_free_memslot(struct kvm_memory_slot *free,
@@ -6313,10 +6354,18 @@ void kvm_arch_free_memslot(struct kvm_memory_slot *free,
 {
 	int i;
 
-	for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) {
-		if (!dont || free->arch.lpage_info[i] != dont->arch.lpage_info[i]) {
-			kvm_kvfree(free->arch.lpage_info[i]);
-			free->arch.lpage_info[i] = NULL;
+	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
+		if (!dont || free->arch.rmap[i] != dont->arch.rmap[i]) {
+			kvm_kvfree(free->arch.rmap[i]);
+			free->arch.rmap[i] = NULL;
+		}
+		if (i == 0)
+			continue;
+
+		if (!dont || free->arch.lpage_info[i - 1] !=
+			     dont->arch.lpage_info[i - 1]) {
+			kvm_kvfree(free->arch.lpage_info[i - 1]);
+			free->arch.lpage_info[i - 1] = NULL;
 		}
 	}
 }
@@ -6325,23 +6374,30 @@ int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 {
 	int i;
 
-	for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) {
+	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
 		unsigned long ugfn;
 		int lpages;
-		int level = i + 2;
+		int level = i + 1;
 
 		lpages = gfn_to_index(slot->base_gfn + npages - 1,
 				      slot->base_gfn, level) + 1;
 
-		slot->arch.lpage_info[i] =
-			kvm_kvzalloc(lpages * sizeof(*slot->arch.lpage_info[i]));
-		if (!slot->arch.lpage_info[i])
+		slot->arch.rmap[i] =
+			kvm_kvzalloc(lpages * sizeof(*slot->arch.rmap[i]));
+		if (!slot->arch.rmap[i])
+			goto out_free;
+		if (i == 0)
+			continue;
+
+		slot->arch.lpage_info[i - 1] = kvm_kvzalloc(lpages *
+					sizeof(*slot->arch.lpage_info[i - 1]));
+		if (!slot->arch.lpage_info[i - 1])
 			goto out_free;
 
 		if (slot->base_gfn & (KVM_PAGES_PER_HPAGE(level) - 1))
-			slot->arch.lpage_info[i][0].write_count = 1;
+			slot->arch.lpage_info[i - 1][0].write_count = 1;
 		if ((slot->base_gfn + npages) & (KVM_PAGES_PER_HPAGE(level) - 1))
-			slot->arch.lpage_info[i][lpages - 1].write_count = 1;
+			slot->arch.lpage_info[i - 1][lpages - 1].write_count = 1;
 		ugfn = slot->userspace_addr >> PAGE_SHIFT;
 		/*
 		 * If the gfn and userspace address are not aligned wrt each
@@ -6353,16 +6409,21 @@ int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 			unsigned long j;
 
 			for (j = 0; j < lpages; ++j)
-				slot->arch.lpage_info[i][j].write_count = 1;
+				slot->arch.lpage_info[i - 1][j].write_count = 1;
 		}
 	}
 
 	return 0;
 
 out_free:
-	for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) {
-		kvm_kvfree(slot->arch.lpage_info[i]);
-		slot->arch.lpage_info[i] = NULL;
+	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
+		kvm_kvfree(slot->arch.rmap[i]);
+		slot->arch.rmap[i] = NULL;
+		if (i == 0)
+			continue;
+
+		kvm_kvfree(slot->arch.lpage_info[i - 1]);
+		slot->arch.lpage_info[i - 1] = NULL;
 	}
 	return -ENOMEM;
 }
@@ -6381,10 +6442,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 		map_flags = MAP_SHARED | MAP_ANONYMOUS;
 
 	/*To keep backward compatibility with older userspace,
-	 *x86 needs to hanlde !user_alloc case.
+	 *x86 needs to handle !user_alloc case.
 	 */
 	if (!user_alloc) {
-		if (npages && !old.rmap) {
+		if (npages && !old.npages) {
 			unsigned long userspace_addr;
 
 			userspace_addr = vm_mmap(NULL, 0,
@@ -6412,7 +6473,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 
 	int nr_mmu_pages = 0, npages = mem->memory_size >> PAGE_SHIFT;
 
-	if (!user_alloc && !old.user_alloc && old.rmap && !npages) {
+	if (!user_alloc && !old.user_alloc && old.npages && !npages) {
 		int ret;
 
 		ret = vm_munmap(old.userspace_addr,
@@ -6431,14 +6492,28 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 		kvm_mmu_change_mmu_pages(kvm, nr_mmu_pages);
 	kvm_mmu_slot_remove_write_access(kvm, mem->slot);
 	spin_unlock(&kvm->mmu_lock);
+	/*
+	 * If memory slot is created, or moved, we need to clear all
+	 * mmio sptes.
+	 */
+	if (npages && old.base_gfn != mem->guest_phys_addr >> PAGE_SHIFT) {
+		kvm_mmu_zap_all(kvm);
+		kvm_reload_remote_mmus(kvm);
+	}
 }
 
-void kvm_arch_flush_shadow(struct kvm *kvm)
+void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
 	kvm_mmu_zap_all(kvm);
 	kvm_reload_remote_mmus(kvm);
 }
 
+void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
+				   struct kvm_memory_slot *slot)
+{
+	kvm_arch_flush_shadow_all(kvm);
+}
+
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 3d1134ddb885..2b5219c12ac8 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -124,4 +124,5 @@ int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,
 
 extern u64 host_xcr0;
 
+extern struct static_key kvm_no_apic_vcpu;
 #endif
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 6e121a2a49e1..7872a3330fb5 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -4,7 +4,6 @@ config LGUEST_GUEST
 	depends on X86_32
 	select VIRTUALIZATION
 	select VIRTIO
-	select VIRTIO_RING
 	select VIRTIO_CONSOLE
 	help
 	  Lguest is a tiny in-kernel hypervisor.  Selecting this will
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 5b2995f4557a..a30ca15be21c 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -17,6 +17,7 @@
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 #include <asm/asm.h>
+#include <asm/smap.h>
 
 /*
  * By placing feature2 after feature1 in altinstructions section, we logically
@@ -130,6 +131,7 @@ ENDPROC(bad_from_user)
  */
 ENTRY(copy_user_generic_unrolled)
 	CFI_STARTPROC
+	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
 	ALIGN_DESTINATION
@@ -177,6 +179,7 @@ ENTRY(copy_user_generic_unrolled)
 	decl %ecx
 	jnz 21b
 23:	xor %eax,%eax
+	ASM_CLAC
 	ret
 
 	.section .fixup,"ax"
@@ -232,6 +235,7 @@ ENDPROC(copy_user_generic_unrolled)
  */
 ENTRY(copy_user_generic_string)
 	CFI_STARTPROC
+	ASM_STAC
 	andl %edx,%edx
 	jz 4f
 	cmpl $8,%edx
@@ -246,6 +250,7 @@ ENTRY(copy_user_generic_string)
 3:	rep
 	movsb
 4:	xorl %eax,%eax
+	ASM_CLAC
 	ret
 
 	.section .fixup,"ax"
@@ -273,12 +278,14 @@ ENDPROC(copy_user_generic_string)
  */
 ENTRY(copy_user_enhanced_fast_string)
 	CFI_STARTPROC
+	ASM_STAC
 	andl %edx,%edx
 	jz 2f
 	movl %edx,%ecx
 1:	rep
 	movsb
 2:	xorl %eax,%eax
+	ASM_CLAC
 	ret
 
 	.section .fixup,"ax"
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index cacddc7163eb..6a4f43c2d9e6 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -15,6 +15,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/asm.h>
+#include <asm/smap.h>
 
 	.macro ALIGN_DESTINATION
 #ifdef FIX_ALIGNMENT
@@ -48,6 +49,7 @@
  */
 ENTRY(__copy_user_nocache)
 	CFI_STARTPROC
+	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
 	ALIGN_DESTINATION
@@ -95,6 +97,7 @@ ENTRY(__copy_user_nocache)
 	decl %ecx
 	jnz 21b
 23:	xorl %eax,%eax
+	ASM_CLAC
 	sfence
 	ret
 
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index b33b1fb1e6d4..156b9c804670 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -33,6 +33,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/asm.h>
+#include <asm/smap.h>
 
 	.text
 ENTRY(__get_user_1)
@@ -40,8 +41,10 @@ ENTRY(__get_user_1)
 	GET_THREAD_INFO(%_ASM_DX)
 	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
+	ASM_STAC
 1:	movzb (%_ASM_AX),%edx
 	xor %eax,%eax
+	ASM_CLAC
 	ret
 	CFI_ENDPROC
 ENDPROC(__get_user_1)
@@ -53,8 +56,10 @@ ENTRY(__get_user_2)
 	GET_THREAD_INFO(%_ASM_DX)
 	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
+	ASM_STAC
 2:	movzwl -1(%_ASM_AX),%edx
 	xor %eax,%eax
+	ASM_CLAC
 	ret
 	CFI_ENDPROC
 ENDPROC(__get_user_2)
@@ -66,8 +71,10 @@ ENTRY(__get_user_4)
 	GET_THREAD_INFO(%_ASM_DX)
 	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
+	ASM_STAC
 3:	mov -3(%_ASM_AX),%edx
 	xor %eax,%eax
+	ASM_CLAC
 	ret
 	CFI_ENDPROC
 ENDPROC(__get_user_4)
@@ -80,8 +87,10 @@ ENTRY(__get_user_8)
 	GET_THREAD_INFO(%_ASM_DX)
 	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae	bad_get_user
+	ASM_STAC
 4:	movq -7(%_ASM_AX),%_ASM_DX
 	xor %eax,%eax
+	ASM_CLAC
 	ret
 	CFI_ENDPROC
 ENDPROC(__get_user_8)
@@ -91,6 +100,7 @@ bad_get_user:
 	CFI_STARTPROC
 	xor %edx,%edx
 	mov $(-EFAULT),%_ASM_AX
+	ASM_CLAC
 	ret
 	CFI_ENDPROC
 END(bad_get_user)
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index b1e6c4b2e8eb..54fcffed28ed 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -18,7 +18,11 @@
  * Copyright (C) IBM Corporation, 2002, 2004, 2009
  */
 
+#ifdef __KERNEL__
 #include <linux/string.h>
+#else
+#include <string.h>
+#endif
 #include <asm/inat.h>
 #include <asm/insn.h>
 
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index 7f951c8f76c4..fc6ba17a7eec 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -15,6 +15,7 @@
 #include <asm/thread_info.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
+#include <asm/smap.h>
 
 
 /*
@@ -31,7 +32,8 @@
 
 #define ENTER	CFI_STARTPROC ; \
 		GET_THREAD_INFO(%_ASM_BX)
-#define EXIT	ret ; \
+#define EXIT	ASM_CLAC ;	\
+		ret ;		\
 		CFI_ENDPROC
 
 .text
@@ -39,6 +41,7 @@ ENTRY(__put_user_1)
 	ENTER
 	cmp TI_addr_limit(%_ASM_BX),%_ASM_CX
 	jae bad_put_user
+	ASM_STAC
 1:	movb %al,(%_ASM_CX)
 	xor %eax,%eax
 	EXIT
@@ -50,6 +53,7 @@ ENTRY(__put_user_2)
 	sub $1,%_ASM_BX
 	cmp %_ASM_BX,%_ASM_CX
 	jae bad_put_user
+	ASM_STAC
 2:	movw %ax,(%_ASM_CX)
 	xor %eax,%eax
 	EXIT
@@ -61,6 +65,7 @@ ENTRY(__put_user_4)
 	sub $3,%_ASM_BX
 	cmp %_ASM_BX,%_ASM_CX
 	jae bad_put_user
+	ASM_STAC
 3:	movl %eax,(%_ASM_CX)
 	xor %eax,%eax
 	EXIT
@@ -72,6 +77,7 @@ ENTRY(__put_user_8)
 	sub $7,%_ASM_BX
 	cmp %_ASM_BX,%_ASM_CX
 	jae bad_put_user
+	ASM_STAC
 4:	mov %_ASM_AX,(%_ASM_CX)
 #ifdef CONFIG_X86_32
 5:	movl %edx,4(%_ASM_CX)
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 1781b2f950e2..98f6d6b68f5a 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -42,10 +42,11 @@ do {									\
 	int __d0;							\
 	might_fault();							\
 	__asm__ __volatile__(						\
+		ASM_STAC "\n"						\
 		"0:	rep; stosl\n"					\
 		"	movl %2,%0\n"					\
 		"1:	rep; stosb\n"					\
-		"2:\n"							\
+		"2: " ASM_CLAC "\n"					\
 		".section .fixup,\"ax\"\n"				\
 		"3:	lea 0(%2,%0,4),%0\n"				\
 		"	jmp 2b\n"					\
@@ -626,10 +627,12 @@ survive:
 		return n;
 	}
 #endif
+	stac();
 	if (movsl_is_ok(to, from, n))
 		__copy_user(to, from, n);
 	else
 		n = __copy_user_intel(to, from, n);
+	clac();
 	return n;
 }
 EXPORT_SYMBOL(__copy_to_user_ll);
@@ -637,10 +640,12 @@ EXPORT_SYMBOL(__copy_to_user_ll);
 unsigned long __copy_from_user_ll(void *to, const void __user *from,
 					unsigned long n)
 {
+	stac();
 	if (movsl_is_ok(to, from, n))
 		__copy_user_zeroing(to, from, n);
 	else
 		n = __copy_user_zeroing_intel(to, from, n);
+	clac();
 	return n;
 }
 EXPORT_SYMBOL(__copy_from_user_ll);
@@ -648,11 +653,13 @@ EXPORT_SYMBOL(__copy_from_user_ll);
 unsigned long __copy_from_user_ll_nozero(void *to, const void __user *from,
 					 unsigned long n)
 {
+	stac();
 	if (movsl_is_ok(to, from, n))
 		__copy_user(to, from, n);
 	else
 		n = __copy_user_intel((void __user *)to,
 				      (const void *)from, n);
+	clac();
 	return n;
 }
 EXPORT_SYMBOL(__copy_from_user_ll_nozero);
@@ -660,6 +667,7 @@ EXPORT_SYMBOL(__copy_from_user_ll_nozero);
 unsigned long __copy_from_user_ll_nocache(void *to, const void __user *from,
 					unsigned long n)
 {
+	stac();
 #ifdef CONFIG_X86_INTEL_USERCOPY
 	if (n > 64 && cpu_has_xmm2)
 		n = __copy_user_zeroing_intel_nocache(to, from, n);
@@ -668,6 +676,7 @@ unsigned long __copy_from_user_ll_nocache(void *to, const void __user *from,
 #else
 	__copy_user_zeroing(to, from, n);
 #endif
+	clac();
 	return n;
 }
 EXPORT_SYMBOL(__copy_from_user_ll_nocache);
@@ -675,6 +684,7 @@ EXPORT_SYMBOL(__copy_from_user_ll_nocache);
 unsigned long __copy_from_user_ll_nocache_nozero(void *to, const void __user *from,
 					unsigned long n)
 {
+	stac();
 #ifdef CONFIG_X86_INTEL_USERCOPY
 	if (n > 64 && cpu_has_xmm2)
 		n = __copy_user_intel_nocache(to, from, n);
@@ -683,6 +693,7 @@ unsigned long __copy_from_user_ll_nocache_nozero(void *to, const void __user *fr
 #else
 	__copy_user(to, from, n);
 #endif
+	clac();
 	return n;
 }
 EXPORT_SYMBOL(__copy_from_user_ll_nocache_nozero);
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index e5b130bc2d0e..05928aae911e 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -18,6 +18,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size)
 	might_fault();
 	/* no memory constraint because it doesn't change any memory gcc knows
 	   about */
+	stac();
 	asm volatile(
 		"	testq  %[size8],%[size8]\n"
 		"	jz     4f\n"
@@ -40,6 +41,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size)
 		: [size8] "=&c"(size), [dst] "=&D" (__d0)
 		: [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
 		  [zero] "r" (0UL), [eight] "r" (8UL));
+	clac();
 	return size;
 }
 EXPORT_SYMBOL(__clear_user);
@@ -82,5 +84,6 @@ copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest)
 	for (c = 0, zero_len = len; zerorest && zero_len; --zero_len)
 		if (__put_user_nocheck(c, to++, sizeof(char)))
 			break;
+	clac();
 	return len;
 }
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 76dcd9d8e0bc..a530b230e7d7 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -18,6 +18,7 @@
 #include <asm/pgalloc.h>		/* pgd_*(), ...			*/
 #include <asm/kmemcheck.h>		/* kmemcheck_*(), ...		*/
 #include <asm/fixmap.h>			/* VSYSCALL_START		*/
+#include <asm/rcu.h>			/* exception_enter(), ...	*/
 
 /*
  * Page fault error code bits:
@@ -995,13 +996,24 @@ static int fault_in_kernel_space(unsigned long address)
 	return address >= TASK_SIZE_MAX;
 }
 
+static inline bool smap_violation(int error_code, struct pt_regs *regs)
+{
+	if (error_code & PF_USER)
+		return false;
+
+	if (!user_mode_vm(regs) && (regs->flags & X86_EFLAGS_AC))
+		return false;
+
+	return true;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
  * routines.
  */
-dotraplinkage void __kprobes
-do_page_fault(struct pt_regs *regs, unsigned long error_code)
+static void __kprobes
+__do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
@@ -1088,6 +1100,13 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	if (unlikely(error_code & PF_RSVD))
 		pgtable_bad(regs, error_code, address);
 
+	if (static_cpu_has(X86_FEATURE_SMAP)) {
+		if (unlikely(smap_violation(error_code, regs))) {
+			bad_area_nosemaphore(regs, error_code, address);
+			return;
+		}
+	}
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
 	/*
@@ -1209,3 +1228,11 @@ good_area:
 
 	up_read(&mm->mmap_sem);
 }
+
+dotraplinkage void __kprobes
+do_page_fault(struct pt_regs *regs, unsigned long error_code)
+{
+	exception_enter(regs);
+	__do_page_fault(regs, error_code);
+	exception_exit(regs);
+}
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index f6679a7fb8ca..b91e48512425 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr)
 }
 
 /*
- * search for a shareable pmd page for hugetlb.
+ * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc()
+ * and returns the corresponding pte. While this is not necessary for the
+ * !shared pmd case because we can allocate the pmd later as well, it makes the
+ * code much cleaner. pmd allocation is essential for the shared case because
+ * pud has to be populated inside the same i_mmap_mutex section - otherwise
+ * racing tasks could either miss the sharing (see huge_pte_offset) or select a
+ * bad pmd for sharing.
  */
-static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
+static pte_t *
+huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 {
 	struct vm_area_struct *vma = find_vma(mm, addr);
 	struct address_space *mapping = vma->vm_file->f_mapping;
@@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 	struct vm_area_struct *svma;
 	unsigned long saddr;
 	pte_t *spte = NULL;
+	pte_t *pte;
 
 	if (!vma_shareable(vma, addr))
-		return;
+		return (pte_t *)pmd_alloc(mm, pud, addr);
 
 	mutex_lock(&mapping->i_mmap_mutex);
 	vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) {
@@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 		put_page(virt_to_page(spte));
 	spin_unlock(&mm->page_table_lock);
 out:
+	pte = (pte_t *)pmd_alloc(mm, pud, addr);
 	mutex_unlock(&mapping->i_mmap_mutex);
+	return pte;
 }
 
 /*
@@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		} else {
 			BUG_ON(sz != PMD_SIZE);
 			if (pud_none(*pud))
-				huge_pmd_share(mm, addr, pud);
-			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+				pte = huge_pmd_share(mm, addr, pud);
+			else
+				pte = (pte_t *)pmd_alloc(mm, pud, addr);
 		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index e0e6990723e9..ab1f6a93b527 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -319,7 +319,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
  */
 int devmem_is_allowed(unsigned long pagenr)
 {
-	if (pagenr <= 256)
+	if (pagenr < 256)
 		return 1;
 	if (iomem_is_exclusive(pagenr << PAGE_SHIFT))
 		return 0;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 575d86f85ce4..11a58001b4ce 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -445,10 +445,10 @@ static inline void permanent_kmaps_init(pgd_t *pgd_base)
 }
 #endif /* CONFIG_HIGHMEM */
 
-void __init native_pagetable_setup_start(pgd_t *base)
+void __init native_pagetable_init(void)
 {
 	unsigned long pfn, va;
-	pgd_t *pgd;
+	pgd_t *pgd, *base = swapper_pg_dir;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -475,10 +475,7 @@ void __init native_pagetable_setup_start(pgd_t *base)
 		pte_clear(NULL, va, pte);
 	}
 	paravirt_alloc_pmd(&init_mm, __pa(base) >> PAGE_SHIFT);
-}
-
-void __init native_pagetable_setup_done(pgd_t *base)
-{
+	paging_init();
 }
 
 /*
@@ -493,7 +490,7 @@ void __init native_pagetable_setup_done(pgd_t *base)
  * If we're booting paravirtualized under a hypervisor, then there are
  * more options: we may already be running PAE, and the pagetable may
  * or may not be based in swapper_pg_dir.  In any case,
- * paravirt_pagetable_setup_start() will set up swapper_pg_dir
+ * paravirt_pagetable_init() will set up swapper_pg_dir
  * appropriately for the rest of the initialization to work.
  *
  * In general, pagetable_init() assumes that the pagetable may already
@@ -712,7 +709,7 @@ static void __init test_wp_bit(void)
   "Checking if this processor honours the WP bit even in supervisor mode...");
 
 	/* Any page-aligned address will do, the test is non-destructive */
-	__set_fixmap(FIX_WP_TEST, __pa(&swapper_pg_dir), PAGE_READONLY);
+	__set_fixmap(FIX_WP_TEST, __pa(&swapper_pg_dir), PAGE_KERNEL_RO);
 	boot_cpu_data.wp_works_ok = do_test_wp_bit();
 	clear_fixmap(FIX_WP_TEST);
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 931930a96160..a718e0d23503 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 
 	/*
 	 * On success we use clflush, when the CPU supports it to
-	 * avoid the wbindv. If the CPU does not support it, in the
-	 * error case, and during early boot (for EFI) we fall back
-	 * to cpa_flush_all (which uses wbinvd):
+	 * avoid the wbindv. If the CPU does not support it and in the
+	 * error case we fall back to cpa_flush_all (which uses
+	 * wbindv):
 	 */
-	if (early_boot_irqs_disabled)
-		__cpa_flush_all((void *)(long)cache);
-	else if (!ret && cpu_has_clflush) {
+	if (!ret && cpu_has_clflush) {
 		if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) {
 			cpa_flush_array(addr, numpages, cache,
 					cpa.flags, pages);
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 4599c3e8bcb6..4ddf497ca65b 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -142,23 +142,23 @@ static inline int save_add_info(void) {return 0;}
 #endif
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
-void __init
+int __init
 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 {
 	u64 start, end;
 	int node, pxm;
 
 	if (srat_disabled())
-		return;
+		return -1;
 	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
 		bad_srat();
-		return;
+		return -1;
 	}
 	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
-		return;
+		return -1;
 
 	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
-		return;
+		return -1;
 	start = ma->base_address;
 	end = start + ma->length;
 	pxm = ma->proximity_domain;
@@ -168,12 +168,12 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 	if (node < 0) {
 		printk(KERN_ERR "SRAT: Too many proximity domains.\n");
 		bad_srat();
-		return;
+		return -1;
 	}
 
 	if (numa_add_memblk(node, start, end) < 0) {
 		bad_srat();
-		return;
+		return -1;
 	}
 
 	node_set(node, numa_nodes_parsed);
@@ -181,6 +181,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 	printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
 	       node, pxm,
 	       (unsigned long long) start, (unsigned long long) end - 1);
+	return 0;
 }
 
 void __init acpi_numa_arch_fixup(void) {}
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 613cd83e8c0c..0777f042e400 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -98,6 +98,8 @@ static void flush_tlb_func(void *info)
 {
 	struct flush_tlb_info *f = info;
 
+	inc_irq_stat(irq_tlb_count);
+
 	if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
 		return;
 
@@ -320,7 +322,7 @@ static ssize_t tlbflush_write_file(struct file *file,
 	if (kstrtos8(buf, 0, &shift))
 		return -EINVAL;
 
-	if (shift > 64)
+	if (shift < -1 || shift >= BITS_PER_LONG)
 		return -EINVAL;
 
 	tlb_flushall_shift = shift;
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 33643a8bcbbb..520d2bd0b9c5 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -280,6 +280,31 @@ void bpf_jit_compile(struct sk_filter *fp)
 				}
 				EMIT4(0x31, 0xd2, 0xf7, 0xf3); /* xor %edx,%edx; div %ebx */
 				break;
+			case BPF_S_ALU_MOD_X: /* A %= X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x85, 0xdb);	/* test %ebx,%ebx */
+				if (pc_ret0 > 0) {
+					/* addrs[pc_ret0 - 1] is start address of target
+					 * (addrs[i] - 6) is the address following this jmp
+					 * ("xor %edx,%edx; div %ebx;mov %edx,%eax" being 6 bytes long)
+					 */
+					EMIT_COND_JMP(X86_JE, addrs[pc_ret0 - 1] -
+								(addrs[i] - 6));
+				} else {
+					EMIT_COND_JMP(X86_JNE, 2 + 5);
+					CLEAR_A();
+					EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 6)); /* jmp .+off32 */
+				}
+				EMIT2(0x31, 0xd2);	/* xor %edx,%edx */
+				EMIT2(0xf7, 0xf3);	/* div %ebx */
+				EMIT2(0x89, 0xd0);	/* mov %edx,%eax */
+				break;
+			case BPF_S_ALU_MOD_K: /* A %= K; */
+				EMIT2(0x31, 0xd2);	/* xor %edx,%edx */
+				EMIT1(0xb9);EMIT(K, 4);	/* mov imm32,%ecx */
+				EMIT2(0xf7, 0xf1);	/* div %ecx */
+				EMIT2(0x89, 0xd0);	/* mov %edx,%eax */
+				break;
 			case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
 				EMIT3(0x48, 0x69, 0xc0); /* imul imm32,%rax,%rax */
 				EMIT(K, 4);
@@ -310,9 +335,18 @@ void bpf_jit_compile(struct sk_filter *fp)
 					EMIT1_off32(0x0d, K);	/* or imm32,%eax */
 				break;
 			case BPF_S_ANC_ALU_XOR_X: /* A ^= X; */
+			case BPF_S_ALU_XOR_X:
 				seen |= SEEN_XREG;
 				EMIT2(0x31, 0xd8);		/* xor %ebx,%eax */
 				break;
+			case BPF_S_ALU_XOR_K: /* A ^= K; */
+				if (K == 0)
+					break;
+				if (is_imm8(K))
+					EMIT3(0x83, 0xf0, K);	/* xor imm8,%eax */
+				else
+					EMIT1_off32(0x35, K);	/* xor imm32,%eax */
+				break;
 			case BPF_S_ALU_LSH_X: /* A <<= X; */
 				seen |= SEEN_XREG;
 				EMIT4(0x89, 0xd9, 0xd3, 0xe0);	/* mov %ebx,%ecx; shl %cl,%eax */
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 505acdd6d600..192397c98606 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -305,7 +305,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	res->flags = flags;
 	res->start = start;
 	res->end = end;
-	res->child = NULL;
 
 	if (!pci_use_crs) {
 		dev_printk(KERN_DEBUG, &info->bridge->dev,
@@ -434,7 +433,7 @@ probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device,
 
 	size = sizeof(*info->res) * info->res_num;
 	info->res_num = 0;
-	info->res = kmalloc(size, GFP_KERNEL);
+	info->res = kzalloc(size, GFP_KERNEL);
 	if (!info->res)
 		return;
 
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 937bcece7006..704b9ec043d7 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -585,7 +585,7 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header)
 	while (i >= sizeof(struct acpi_mcfg_allocation)) {
 		entries++;
 		i -= sizeof(struct acpi_mcfg_allocation);
-	};
+	}
 	if (entries == 0) {
 		pr_err(PREFIX "MMCONFIG has no entries\n");
 		return -ENODEV;
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 6f2f8eeed171..3e6d2a6db866 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -62,11 +62,6 @@ out:
 	return irq;
 }
 
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 int __init pci_visws_init(void)
 {
 	pcibios_enable_irq = &pci_visws_enable_irq;
diff --git a/arch/x86/platform/efi/Makefile b/arch/x86/platform/efi/Makefile
index 73b8be0f3675..6db1cc4c7534 100644
--- a/arch/x86/platform/efi/Makefile
+++ b/arch/x86/platform/efi/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
+obj-$(CONFIG_ACPI_BGRT) += efi-bgrt.o
diff --git a/arch/x86/platform/efi/efi-bgrt.c b/arch/x86/platform/efi/efi-bgrt.c
new file mode 100644
index 000000000000..f6a0c1b8e518
--- /dev/null
+++ b/arch/x86/platform/efi/efi-bgrt.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2012 Intel Corporation
+ * Author: Josh Triplett <josh@joshtriplett.org>
+ *
+ * Based on the bgrt driver:
+ * Copyright 2012 Red Hat, Inc <mjg@redhat.com>
+ * Author: Matthew Garrett
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/efi-bgrt.h>
+
+struct acpi_table_bgrt *bgrt_tab;
+void *bgrt_image;
+size_t bgrt_image_size;
+
+struct bmp_header {
+	u16 id;
+	u32 size;
+} __packed;
+
+void efi_bgrt_init(void)
+{
+	acpi_status status;
+	void __iomem *image;
+	bool ioremapped = false;
+	struct bmp_header bmp_header;
+
+	if (acpi_disabled)
+		return;
+
+	status = acpi_get_table("BGRT", 0,
+	                        (struct acpi_table_header **)&bgrt_tab);
+	if (ACPI_FAILURE(status))
+		return;
+
+	if (bgrt_tab->version != 1)
+		return;
+	if (bgrt_tab->image_type != 0 || !bgrt_tab->image_address)
+		return;
+
+	image = efi_lookup_mapped_addr(bgrt_tab->image_address);
+	if (!image) {
+		image = ioremap(bgrt_tab->image_address, sizeof(bmp_header));
+		ioremapped = true;
+		if (!image)
+			return;
+	}
+
+	memcpy_fromio(&bmp_header, image, sizeof(bmp_header));
+	if (ioremapped)
+		iounmap(image);
+	bgrt_image_size = bmp_header.size;
+
+	bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL);
+	if (!bgrt_image)
+		return;
+
+	if (ioremapped) {
+		image = ioremap(bgrt_tab->image_address, bmp_header.size);
+		if (!image) {
+			kfree(bgrt_image);
+			bgrt_image = NULL;
+			return;
+		}
+	}
+
+	memcpy_fromio(bgrt_image, image, bgrt_image_size);
+	if (ioremapped)
+		iounmap(image);
+}
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 2dc29f51e75a..aded2a91162a 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/efi.h>
+#include <linux/efi-bgrt.h>
 #include <linux/export.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
@@ -234,7 +235,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map(
 	return status;
 }
 
-static int efi_set_rtc_mmss(unsigned long nowtime)
+static efi_status_t __init phys_efi_get_time(efi_time_t *tm,
+					     efi_time_cap_t *tc)
+{
+	unsigned long flags;
+	efi_status_t status;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	efi_call_phys_prelog();
+	status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm),
+				virt_to_phys(tc));
+	efi_call_phys_epilog();
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return status;
+}
+
+int efi_set_rtc_mmss(unsigned long nowtime)
 {
 	int real_seconds, real_minutes;
 	efi_status_t 	status;
@@ -263,7 +279,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime)
 	return 0;
 }
 
-static unsigned long efi_get_time(void)
+unsigned long efi_get_time(void)
 {
 	efi_status_t status;
 	efi_time_t eft;
@@ -404,10 +420,21 @@ void __init efi_reserve_boot_services(void)
 	}
 }
 
-static void __init efi_free_boot_services(void)
+static void __init efi_unmap_memmap(void)
+{
+	if (memmap.map) {
+		early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
+		memmap.map = NULL;
+	}
+}
+
+void __init efi_free_boot_services(void)
 {
 	void *p;
 
+	if (!efi_native)
+		return;
+
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		efi_memory_desc_t *md = p;
 		unsigned long long start = md->phys_addr;
@@ -423,6 +450,8 @@ static void __init efi_free_boot_services(void)
 
 		free_bootmem_late(start, size);
 	}
+
+	efi_unmap_memmap();
 }
 
 static int __init efi_systab_init(void *phys)
@@ -606,13 +635,18 @@ static int __init efi_runtime_init(void)
 	}
 	/*
 	 * We will only need *early* access to the following
-	 * EFI runtime service before set_virtual_address_map
+	 * two EFI runtime services before set_virtual_address_map
 	 * is invoked.
 	 */
+	efi_phys.get_time = (efi_get_time_t *)runtime->get_time;
 	efi_phys.set_virtual_address_map =
 		(efi_set_virtual_address_map_t *)
 		runtime->set_virtual_address_map;
-
+	/*
+	 * Make efi_get_time can be called before entering
+	 * virtual mode.
+	 */
+	efi.get_time = phys_efi_get_time;
 	early_iounmap(runtime, sizeof(efi_runtime_services_t));
 
 	return 0;
@@ -700,16 +734,23 @@ void __init efi_init(void)
 		efi_enabled = 0;
 		return;
 	}
+#ifdef CONFIG_X86_32
 	if (efi_native) {
 		x86_platform.get_wallclock = efi_get_time;
 		x86_platform.set_wallclock = efi_set_rtc_mmss;
 	}
+#endif
 
 #if EFI_DEBUG
 	print_efi_memmap();
 #endif
 }
 
+void __init efi_late_init(void)
+{
+	efi_bgrt_init();
+}
+
 void __init efi_set_executable(efi_memory_desc_t *md, bool executable)
 {
 	u64 addr, npages;
@@ -742,6 +783,34 @@ static void __init runtime_code_page_mkexec(void)
 }
 
 /*
+ * We can't ioremap data in EFI boot services RAM, because we've already mapped
+ * it as RAM.  So, look it up in the existing EFI memory map instead.  Only
+ * callable after efi_enter_virtual_mode and before efi_free_boot_services.
+ */
+void __iomem *efi_lookup_mapped_addr(u64 phys_addr)
+{
+	void *p;
+	if (WARN_ON(!memmap.map))
+		return NULL;
+	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+		efi_memory_desc_t *md = p;
+		u64 size = md->num_pages << EFI_PAGE_SHIFT;
+		u64 end = md->phys_addr + size;
+		if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
+		    md->type != EFI_BOOT_SERVICES_CODE &&
+		    md->type != EFI_BOOT_SERVICES_DATA)
+			continue;
+		if (!md->virt_addr)
+			continue;
+		if (phys_addr >= md->phys_addr && phys_addr < end) {
+			phys_addr += md->virt_addr - md->phys_addr;
+			return (__force void __iomem *)(unsigned long)phys_addr;
+		}
+	}
+	return NULL;
+}
+
+/*
  * This function will switch the EFI runtime services to virtual mode.
  * Essentially, look through the EFI memmap and map every region that
  * has the runtime attribute bit set in its memory descriptor and update
@@ -765,8 +834,10 @@ void __init efi_enter_virtual_mode(void)
 	 * non-native EFI
 	 */
 
-	if (!efi_native)
-		goto out;
+	if (!efi_native) {
+		efi_unmap_memmap();
+		return;
+	}
 
 	/* Merge contiguous regions of the same type and attribute */
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
@@ -856,18 +927,12 @@ void __init efi_enter_virtual_mode(void)
 	}
 
 	/*
-	 * Thankfully, it does seem that no runtime services other than
-	 * SetVirtualAddressMap() will touch boot services code, so we can
-	 * get rid of it all at this point
-	 */
-	efi_free_boot_services();
-
-	/*
 	 * Now that EFI is in virtual mode, update the function
 	 * pointers in the runtime service table to the new virtual addresses.
 	 *
 	 * Call EFI services through wrapper functions.
 	 */
+	efi.runtime_version = efi_systab.fw_revision;
 	efi.get_time = virt_efi_get_time;
 	efi.set_time = virt_efi_set_time;
 	efi.get_wakeup_time = virt_efi_get_wakeup_time;
@@ -884,9 +949,6 @@ void __init efi_enter_virtual_mode(void)
 	if (__supported_pte_mask & _PAGE_NX)
 		runtime_code_page_mkexec();
 
-out:
-	early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
-	memmap.map = NULL;
 	kfree(new_memmap);
 }
 
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index b2d534cab25f..88692871823f 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -72,7 +72,7 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \
 		   -Wall -Wstrict-prototypes \
 		   -march=i386 -mregparm=3 \
 		   -include $(srctree)/$(src)/../../boot/code16gcc.h \
-		   -fno-strict-aliasing -fomit-frame-pointer \
+		   -fno-strict-aliasing -fomit-frame-pointer -fno-pic \
 		   $(call cc-option, -ffreestanding) \
 		   $(call cc-option, -fno-toplevel-reorder,\
 			$(call cc-option, -fno-unit-at-a-time)) \
diff --git a/arch/x86/realmode/rm/wakeup.h b/arch/x86/realmode/rm/wakeup.h
index 9317e0042f24..7dd86a419f5d 100644
--- a/arch/x86/realmode/rm/wakeup.h
+++ b/arch/x86/realmode/rm/wakeup.h
@@ -36,5 +36,7 @@ extern struct wakeup_header wakeup_header;
 
 /* Wakeup behavior bits */
 #define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE     0
+#define WAKEUP_BEHAVIOR_RESTORE_CR4		1
+#define WAKEUP_BEHAVIOR_RESTORE_EFER		2
 
 #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */
diff --git a/arch/x86/realmode/rm/wakeup_asm.S b/arch/x86/realmode/rm/wakeup_asm.S
index 8905166b0bbb..e56479e58053 100644
--- a/arch/x86/realmode/rm/wakeup_asm.S
+++ b/arch/x86/realmode/rm/wakeup_asm.S
@@ -74,9 +74,18 @@ ENTRY(wakeup_start)
 
 	lidtl	wakeup_idt
 
-	/* Clear the EFLAGS */
-	pushl	$0
+	/* Clear the EFLAGS but remember if we have EFLAGS.ID */
+	movl $X86_EFLAGS_ID, %ecx
+	pushl %ecx
 	popfl
+	pushfl
+	popl %edi
+	pushl $0
+	popfl
+	pushfl
+	popl %edx
+	xorl %edx, %edi
+	andl %ecx, %edi		/* %edi is zero iff CPUID & %cr4 are missing */
 
 	/* Check header signature... */
 	movl	signature, %eax
@@ -93,8 +102,8 @@ ENTRY(wakeup_start)
 
 	/* Restore MISC_ENABLE before entering protected mode, in case
 	   BIOS decided to clear XD_DISABLE during S3. */
-	movl	pmode_behavior, %eax
-	btl	$WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
+	movl	pmode_behavior, %edi
+	btl	$WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %edi
 	jnc	1f
 
 	movl	pmode_misc_en, %eax
@@ -110,15 +119,15 @@ ENTRY(wakeup_start)
 	movl	pmode_cr3, %eax
 	movl	%eax, %cr3
 
-	movl	pmode_cr4, %ecx
-	jecxz	1f
-	movl	%ecx, %cr4
+	btl	$WAKEUP_BEHAVIOR_RESTORE_CR4, %edi
+	jz	1f
+	movl	pmode_cr4, %eax
+	movl	%eax, %cr4
 1:
+	btl	$WAKEUP_BEHAVIOR_RESTORE_EFER, %edi
+	jz	1f
 	movl	pmode_efer, %eax
 	movl	pmode_efer + 4, %edx
-	movl	%eax, %ecx
-	orl	%edx, %ecx
-	jz	1f
 	movl	$MSR_EFER, %ecx
 	wrmsr
 1:
diff --git a/arch/x86/syscalls/Makefile b/arch/x86/syscalls/Makefile
index 3236aebc828d..f325af26107c 100644
--- a/arch/x86/syscalls/Makefile
+++ b/arch/x86/syscalls/Makefile
@@ -1,7 +1,9 @@
 out := $(obj)/../include/generated/asm
+uapi := $(obj)/../include/generated/uapi/asm
 
 # Create output directory if not already present
-_dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)')
+_dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') \
+	  $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)')
 
 syscall32 := $(srctree)/$(src)/syscall_32.tbl
 syscall64 := $(srctree)/$(src)/syscall_64.tbl
@@ -18,7 +20,7 @@ quiet_cmd_systbl = SYSTBL  $@
       cmd_systbl = $(CONFIG_SHELL) '$(systbl)' $< $@
 
 syshdr_abi_unistd_32 := i386
-$(out)/unistd_32.h: $(syscall32) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall32) $(syshdr)
 	$(call if_changed,syshdr)
 
 syshdr_abi_unistd_32_ia32 := i386
@@ -28,11 +30,11 @@ $(out)/unistd_32_ia32.h: $(syscall32) $(syshdr)
 
 syshdr_abi_unistd_x32 := common,x32
 syshdr_offset_unistd_x32 := __X32_SYSCALL_BIT
-$(out)/unistd_x32.h: $(syscall64) $(syshdr)
+$(uapi)/unistd_x32.h: $(syscall64) $(syshdr)
 	$(call if_changed,syshdr)
 
 syshdr_abi_unistd_64 := common,64
-$(out)/unistd_64.h: $(syscall64) $(syshdr)
+$(uapi)/unistd_64.h: $(syscall64) $(syshdr)
 	$(call if_changed,syshdr)
 
 syshdr_abi_unistd_64_x32 := x32
@@ -45,11 +47,12 @@ $(out)/syscalls_32.h: $(syscall32) $(systbl)
 $(out)/syscalls_64.h: $(syscall64) $(systbl)
 	$(call if_changed,systbl)
 
-syshdr-y			+= unistd_32.h unistd_64.h unistd_x32.h
+uapisyshdr-y			+= unistd_32.h unistd_64.h unistd_x32.h
 syshdr-y			+= syscalls_32.h
 syshdr-$(CONFIG_X86_64)		+= unistd_32_ia32.h unistd_64_x32.h
 syshdr-$(CONFIG_X86_64)		+= syscalls_64.h
 
-targets	+= $(syshdr-y)
+targets	+= $(uapisyshdr-y) $(syshdr-y)
 
-all: $(addprefix $(out)/,$(targets))
+all: $(addprefix $(uapi)/,$(uapisyshdr-y))
+all: $(addprefix $(out)/,$(syshdr-y))
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
index 51171aeff0dc..a582bfed95bb 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -60,8 +60,8 @@
 51	common	getsockname		sys_getsockname
 52	common	getpeername		sys_getpeername
 53	common	socketpair		sys_socketpair
-54	common	setsockopt		sys_setsockopt
-55	common	getsockopt		sys_getsockopt
+54	64	setsockopt		sys_setsockopt
+55	64	getsockopt		sys_getsockopt
 56	common	clone			stub_clone
 57	common	fork			stub_fork
 58	common	vfork			stub_vfork
@@ -318,7 +318,7 @@
 309	common	getcpu			sys_getcpu
 310	64	process_vm_readv	sys_process_vm_readv
 311	64	process_vm_writev	sys_process_vm_writev
-312	64	kcmp			sys_kcmp
+312	common	kcmp			sys_kcmp
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
@@ -353,3 +353,5 @@
 538	x32	sendmmsg		compat_sys_sendmmsg
 539	x32	process_vm_readv	compat_sys_process_vm_readv
 540	x32	process_vm_writev	compat_sys_process_vm_writev
+541	x32	setsockopt		compat_sys_setsockopt
+542	x32	getsockopt		compat_sys_getsockopt
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
index 733057b435b0..bae601f900ef 100644
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -28,7 +28,7 @@ posttest: $(obj)/test_get_len vmlinux $(obj)/insn_sanity
 hostprogs-y	+= test_get_len insn_sanity
 
 # -I needed for generated C source and C source which in the kernel tree.
-HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
+HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/uapi/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/uapi/
 
 HOSTCFLAGS_insn_sanity.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
 
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 9926e11a772d..aeaff8bef2f1 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -21,6 +21,7 @@ config 64BIT
 config X86_32
 	def_bool !64BIT
 	select HAVE_AOUT
+	select ARCH_WANT_IPC_PARSE_VERSION
 
 config X86_64
 	def_bool 64BIT
diff --git a/arch/x86/um/shared/sysdep/kernel-offsets.h b/arch/x86/um/shared/sysdep/kernel-offsets.h
index 5868526b5eef..46a9df99f3c5 100644
--- a/arch/x86/um/shared/sysdep/kernel-offsets.h
+++ b/arch/x86/um/shared/sysdep/kernel-offsets.h
@@ -7,9 +7,6 @@
 #define DEFINE(sym, val) \
 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
 
-#define STR(x) #x
-#define DEFINE_STR(sym, val) asm volatile("\n->" #sym " " STR(val) " " #val: : )
-
 #define BLANK() asm volatile("\n->" : : )
 
 #define OFFSET(sym, str, mem) \
diff --git a/arch/x86/um/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls.h
index bd9a89b67e41..ca255a805ed9 100644
--- a/arch/x86/um/shared/sysdep/syscalls.h
+++ b/arch/x86/um/shared/sysdep/syscalls.h
@@ -1,3 +1,5 @@
+extern long sys_clone(unsigned long clone_flags, unsigned long newsp,
+	       void __user *parent_tid, void __user *child_tid);
 #ifdef __i386__
 #include "syscalls_32.h"
 #else
diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c
index a508cea13503..ba7363ecf896 100644
--- a/arch/x86/um/signal.c
+++ b/arch/x86/um/signal.c
@@ -416,9 +416,6 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig,
 	PT_REGS_AX(regs) = (unsigned long) sig;
 	PT_REGS_DX(regs) = (unsigned long) 0;
 	PT_REGS_CX(regs) = (unsigned long) 0;
-
-	if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
-		ptrace_notify(SIGTRAP);
 	return 0;
 }
 
@@ -466,9 +463,6 @@ int setup_signal_stack_si(unsigned long stack_top, int sig,
 	PT_REGS_AX(regs) = (unsigned long) sig;
 	PT_REGS_DX(regs) = (unsigned long) &frame->info;
 	PT_REGS_CX(regs) = (unsigned long) &frame->uc;
-
-	if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
-		ptrace_notify(SIGTRAP);
 	return 0;
 }
 
diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c
index 68d1dc91b37b..b5408cecac6c 100644
--- a/arch/x86/um/sys_call_table_32.c
+++ b/arch/x86/um/sys_call_table_32.c
@@ -28,7 +28,7 @@
 #define ptregs_execve sys_execve
 #define ptregs_iopl sys_iopl
 #define ptregs_vm86old sys_vm86old
-#define ptregs_clone sys_clone
+#define ptregs_clone i386_clone
 #define ptregs_vm86 sys_vm86
 #define ptregs_sigaltstack sys_sigaltstack
 #define ptregs_vfork sys_vfork
diff --git a/arch/x86/um/syscalls_32.c b/arch/x86/um/syscalls_32.c
index b853e8600b9d..db444c7218fe 100644
--- a/arch/x86/um/syscalls_32.c
+++ b/arch/x86/um/syscalls_32.c
@@ -3,37 +3,24 @@
  * Licensed under the GPL
  */
 
-#include "linux/sched.h"
-#include "linux/shm.h"
-#include "linux/ipc.h"
-#include "linux/syscalls.h"
-#include "asm/mman.h"
-#include "asm/uaccess.h"
-#include "asm/unistd.h"
+#include <linux/syscalls.h>
+#include <sysdep/syscalls.h>
 
 /*
  * The prototype on i386 is:
  *
- *     int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr)
+ *     int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls
  *
  * and the "newtls" arg. on i386 is read by copy_thread directly from the
  * register saved on the stack.
  */
-long sys_clone(unsigned long clone_flags, unsigned long newsp,
-	       int __user *parent_tid, void *newtls, int __user *child_tid)
+long i386_clone(unsigned long clone_flags, unsigned long newsp,
+		int __user *parent_tid, void *newtls, int __user *child_tid)
 {
-	long ret;
-
-	if (!newsp)
-		newsp = UPT_SP(&current->thread.regs.regs);
-
-	current->thread.forking = 1;
-	ret = do_fork(clone_flags, newsp, &current->thread.regs, 0, parent_tid,
-		      child_tid);
-	current->thread.forking = 0;
-	return ret;
+	return sys_clone(clone_flags, newsp, parent_tid, child_tid);
 }
 
+
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 			 struct old_sigaction __user *oact)
 {
diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c
index f3d82bb6e15a..adb08eb5c22a 100644
--- a/arch/x86/um/syscalls_64.c
+++ b/arch/x86/um/syscalls_64.c
@@ -5,12 +5,9 @@
  * Licensed under the GPL
  */
 
-#include "linux/linkage.h"
-#include "linux/personality.h"
-#include "linux/utsname.h"
-#include "asm/prctl.h" /* XXX This should get the constants from libc */
-#include "asm/uaccess.h"
-#include "os.h"
+#include <linux/sched.h>
+#include <asm/prctl.h> /* XXX This should get the constants from libc */
+#include <os.h>
 
 long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr)
 {
@@ -79,20 +76,6 @@ long sys_arch_prctl(int code, unsigned long addr)
 	return arch_prctl(current, code, (unsigned long __user *) addr);
 }
 
-long sys_clone(unsigned long clone_flags, unsigned long newsp,
-	       void __user *parent_tid, void __user *child_tid)
-{
-	long ret;
-
-	if (!newsp)
-		newsp = UPT_SP(&current->thread.regs.regs);
-	current->thread.forking = 1;
-	ret = do_fork(clone_flags, newsp, &current->thread.regs, 0, parent_tid,
-		      child_tid);
-	current->thread.forking = 0;
-	return ret;
-}
-
 void arch_switch_to(struct task_struct *to)
 {
 	if ((to->thread.arch.fs == 0) || (to->mm == NULL))
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
index ec57bd3818a4..7005ced5d1ad 100644
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -6,8 +6,9 @@
 
 #include <xen/xen.h>
 #include <xen/interface/physdev.h>
+#include "xen-ops.h"
 
-unsigned int xen_io_apic_read(unsigned apic, unsigned reg)
+static unsigned int xen_io_apic_read(unsigned apic, unsigned reg)
 {
 	struct physdev_apic apic_op;
 	int ret;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bf4bda6d3e9a..bf788d34530d 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -31,9 +31,9 @@
 #include <linux/pci.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
-#include <linux/syscore_ops.h>
 
 #include <xen/xen.h>
+#include <xen/events.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>
 #include <xen/interface/physdev.h>
@@ -81,6 +81,8 @@
 #include "smp.h"
 #include "multicalls.h"
 
+#include <xen/events.h>
+
 EXPORT_SYMBOL_GPL(hypercall_page);
 
 DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
@@ -1289,7 +1291,6 @@ asmlinkage void __init xen_start_kernel(void)
 {
 	struct physdev_set_iopl set_iopl;
 	int rc;
-	pgd_t *pgd;
 
 	if (!xen_start_info)
 		return;
@@ -1381,8 +1382,6 @@ asmlinkage void __init xen_start_kernel(void)
 	acpi_numa = -1;
 #endif
 
-	pgd = (pgd_t *)xen_start_info->pt_base;
-
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
@@ -1391,7 +1390,7 @@ asmlinkage void __init xen_start_kernel(void)
 	early_boot_irqs_disabled = true;
 
 	xen_raw_console_write("mapping kernel into physical memory\n");
-	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
+	xen_setup_kernel_pagetable((pgd_t *)xen_start_info->pt_base, xen_start_info->nr_pages);
 
 	/* Allocate and initialize top and mid mfn levels for p2m structure */
 	xen_build_mfn_list_list();
@@ -1442,17 +1441,29 @@ asmlinkage void __init xen_start_kernel(void)
 		const struct dom0_vga_console_info *info =
 			(void *)((char *)xen_start_info +
 				 xen_start_info->console.dom0.info_off);
+		struct xen_platform_op op = {
+			.cmd = XENPF_firmware_info,
+			.interface_version = XENPF_INTERFACE_VERSION,
+			.u.firmware_info.type = XEN_FW_KBD_SHIFT_FLAGS,
+		};
 
 		xen_init_vga(info, xen_start_info->console.dom0.info_size);
 		xen_start_info->console.domU.mfn = 0;
 		xen_start_info->console.domU.evtchn = 0;
 
+		if (HYPERVISOR_dom0_op(&op) == 0)
+			boot_params.kbd_status = op.u.firmware_info.u.kbd_shift_flags;
+
 		xen_init_apic();
 
 		/* Make sure ACS will be enabled */
 		pci_request_acs();
 
 		xen_acpi_sleep_register();
+
+		/* Avoid searching for BIOS MP tables */
+		x86_init.mpparse.find_smp_config = x86_init_noop;
+		x86_init.mpparse.get_smp_config = x86_init_uint_noop;
 	}
 #ifdef CONFIG_PCI
 	/* PCI BIOS service won't work from a PV guest. */
@@ -1470,130 +1481,38 @@ asmlinkage void __init xen_start_kernel(void)
 #endif
 }
 
-#ifdef CONFIG_XEN_PVHVM
-/*
- * The pfn containing the shared_info is located somewhere in RAM. This
- * will cause trouble if the current kernel is doing a kexec boot into a
- * new kernel. The new kernel (and its startup code) can not know where
- * the pfn is, so it can not reserve the page. The hypervisor will
- * continue to update the pfn, and as a result memory corruption occours
- * in the new kernel.
- *
- * One way to work around this issue is to allocate a page in the
- * xen-platform pci device's BAR memory range. But pci init is done very
- * late and the shared_info page is already in use very early to read
- * the pvclock. So moving the pfn from RAM to MMIO is racy because some
- * code paths on other vcpus could access the pfn during the small
- * window when the old pfn is moved to the new pfn. There is even a
- * small window were the old pfn is not backed by a mfn, and during that
- * time all reads return -1.
- *
- * Because it is not known upfront where the MMIO region is located it
- * can not be used right from the start in xen_hvm_init_shared_info.
- *
- * To minimise trouble the move of the pfn is done shortly before kexec.
- * This does not eliminate the race because all vcpus are still online
- * when the syscore_ops will be called. But hopefully there is no work
- * pending at this point in time. Also the syscore_op is run last which
- * reduces the risk further.
- */
-
-static struct shared_info *xen_hvm_shared_info;
-
-static void xen_hvm_connect_shared_info(unsigned long pfn)
+void __ref xen_hvm_init_shared_info(void)
 {
+	int cpu;
 	struct xen_add_to_physmap xatp;
+	static struct shared_info *shared_info_page = 0;
 
+	if (!shared_info_page)
+		shared_info_page = (struct shared_info *)
+			extend_brk(PAGE_SIZE, PAGE_SIZE);
 	xatp.domid = DOMID_SELF;
 	xatp.idx = 0;
 	xatp.space = XENMAPSPACE_shared_info;
-	xatp.gpfn = pfn;
+	xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
 	if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
 		BUG();
 
-}
-static void xen_hvm_set_shared_info(struct shared_info *sip)
-{
-	int cpu;
-
-	HYPERVISOR_shared_info = sip;
+	HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
 
 	/* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
 	 * page, we use it in the event channel upcall and in some pvclock
 	 * related functions. We don't need the vcpu_info placement
 	 * optimizations because we don't use any pv_mmu or pv_irq op on
 	 * HVM.
-	 * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is
-	 * online but xen_hvm_set_shared_info is run at resume time too and
+	 * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is
+	 * online but xen_hvm_init_shared_info is run at resume time too and
 	 * in that case multiple vcpus might be online. */
 	for_each_online_cpu(cpu) {
 		per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 	}
 }
 
-/* Reconnect the shared_info pfn to a mfn */
-void xen_hvm_resume_shared_info(void)
-{
-	xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT);
-}
-
-#ifdef CONFIG_KEXEC
-static struct shared_info *xen_hvm_shared_info_kexec;
-static unsigned long xen_hvm_shared_info_pfn_kexec;
-
-/* Remember a pfn in MMIO space for kexec reboot */
-void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn)
-{
-	xen_hvm_shared_info_kexec = sip;
-	xen_hvm_shared_info_pfn_kexec = pfn;
-}
-
-static void xen_hvm_syscore_shutdown(void)
-{
-	struct xen_memory_reservation reservation = {
-		.domid = DOMID_SELF,
-		.nr_extents = 1,
-	};
-	unsigned long prev_pfn;
-	int rc;
-
-	if (!xen_hvm_shared_info_kexec)
-		return;
-
-	prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT;
-	set_xen_guest_handle(reservation.extent_start, &prev_pfn);
-
-	/* Move pfn to MMIO, disconnects previous pfn from mfn */
-	xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec);
-
-	/* Update pointers, following hypercall is also a memory barrier */
-	xen_hvm_set_shared_info(xen_hvm_shared_info_kexec);
-
-	/* Allocate new mfn for previous pfn */
-	do {
-		rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
-		if (rc == 0)
-			msleep(123);
-	} while (rc == 0);
-
-	/* Make sure the previous pfn is really connected to a (new) mfn */
-	BUG_ON(rc != 1);
-}
-
-static struct syscore_ops xen_hvm_syscore_ops = {
-	.shutdown = xen_hvm_syscore_shutdown,
-};
-#endif
-
-/* Use a pfn in RAM, may move to MMIO before kexec. */
-static void __init xen_hvm_init_shared_info(void)
-{
-	/* Remember pointer for resume */
-	xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE);
-	xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT);
-	xen_hvm_set_shared_info(xen_hvm_shared_info);
-}
-
+#ifdef CONFIG_XEN_PVHVM
 static void __init init_hvm_pv_info(void)
 {
 	int major, minor;
@@ -1644,9 +1563,6 @@ static void __init xen_hvm_guest_init(void)
 	init_hvm_pv_info();
 
 	xen_hvm_init_shared_info();
-#ifdef CONFIG_KEXEC
-	register_syscore_ops(&xen_hvm_syscore_ops);
-#endif
 
 	if (xen_feature(XENFEAT_hvm_callback_vector))
 		xen_have_vector_callback = 1;
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 157337657971..01a4dc015ae1 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -5,6 +5,7 @@
 #include <xen/interface/xen.h>
 #include <xen/interface/sched.h>
 #include <xen/interface/vcpu.h>
+#include <xen/events.h>
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index b65a76133f4f..5a16824cc2b3 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -84,6 +84,7 @@
  */
 DEFINE_SPINLOCK(xen_reservation_lock);
 
+#ifdef CONFIG_X86_32
 /*
  * Identity map, in addition to plain kernel map.  This needs to be
  * large enough to allocate page table pages to allocate the rest.
@@ -91,7 +92,7 @@ DEFINE_SPINLOCK(xen_reservation_lock);
  */
 #define LEVEL1_IDENT_ENTRIES	(PTRS_PER_PTE * 4)
 static RESERVE_BRK_ARRAY(pte_t, level1_ident_pgt, LEVEL1_IDENT_ENTRIES);
-
+#endif
 #ifdef CONFIG_X86_64
 /* l3 pud for userspace vsyscall mapping */
 static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
@@ -1174,9 +1175,7 @@ static void xen_exit_mmap(struct mm_struct *mm)
 	spin_unlock(&mm->page_table_lock);
 }
 
-static void __init xen_pagetable_setup_start(pgd_t *base)
-{
-}
+static void xen_post_allocator_init(void);
 
 static __init void xen_mapping_pagetable_reserve(u64 start, u64 end)
 {
@@ -1192,14 +1191,87 @@ static __init void xen_mapping_pagetable_reserve(u64 start, u64 end)
 	}
 }
 
-static void xen_post_allocator_init(void);
+#ifdef CONFIG_X86_64
+static void __init xen_cleanhighmap(unsigned long vaddr,
+				    unsigned long vaddr_end)
+{
+	unsigned long kernel_end = roundup((unsigned long)_brk_end, PMD_SIZE) - 1;
+	pmd_t *pmd = level2_kernel_pgt + pmd_index(vaddr);
 
-static void __init xen_pagetable_setup_done(pgd_t *base)
+	/* NOTE: The loop is more greedy than the cleanup_highmap variant.
+	 * We include the PMD passed in on _both_ boundaries. */
+	for (; vaddr <= vaddr_end && (pmd < (level2_kernel_pgt + PAGE_SIZE));
+			pmd++, vaddr += PMD_SIZE) {
+		if (pmd_none(*pmd))
+			continue;
+		if (vaddr < (unsigned long) _text || vaddr > kernel_end)
+			set_pmd(pmd, __pmd(0));
+	}
+	/* In case we did something silly, we should crash in this function
+	 * instead of somewhere later and be confusing. */
+	xen_mc_flush();
+}
+#endif
+static void __init xen_pagetable_init(void)
 {
+#ifdef CONFIG_X86_64
+	unsigned long size;
+	unsigned long addr;
+#endif
+	paging_init();
 	xen_setup_shared_info();
+#ifdef CONFIG_X86_64
+	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		unsigned long new_mfn_list;
+
+		size = PAGE_ALIGN(xen_start_info->nr_pages * sizeof(unsigned long));
+
+		/* On 32-bit, we get zero so this never gets executed. */
+		new_mfn_list = xen_revector_p2m_tree();
+		if (new_mfn_list && new_mfn_list != xen_start_info->mfn_list) {
+			/* using __ka address and sticking INVALID_P2M_ENTRY! */
+			memset((void *)xen_start_info->mfn_list, 0xff, size);
+
+			/* We should be in __ka space. */
+			BUG_ON(xen_start_info->mfn_list < __START_KERNEL_map);
+			addr = xen_start_info->mfn_list;
+			/* We roundup to the PMD, which means that if anybody at this stage is
+			 * using the __ka address of xen_start_info or xen_start_info->shared_info
+			 * they are in going to crash. Fortunatly we have already revectored
+			 * in xen_setup_kernel_pagetable and in xen_setup_shared_info. */
+			size = roundup(size, PMD_SIZE);
+			xen_cleanhighmap(addr, addr + size);
+
+			size = PAGE_ALIGN(xen_start_info->nr_pages * sizeof(unsigned long));
+			memblock_free(__pa(xen_start_info->mfn_list), size);
+			/* And revector! Bye bye old array */
+			xen_start_info->mfn_list = new_mfn_list;
+		} else
+			goto skip;
+	}
+	/* At this stage, cleanup_highmap has already cleaned __ka space
+	 * from _brk_limit way up to the max_pfn_mapped (which is the end of
+	 * the ramdisk). We continue on, erasing PMD entries that point to page
+	 * tables - do note that they are accessible at this stage via __va.
+	 * For good measure we also round up to the PMD - which means that if
+	 * anybody is using __ka address to the initial boot-stack - and try
+	 * to use it - they are going to crash. The xen_start_info has been
+	 * taken care of already in xen_setup_kernel_pagetable. */
+	addr = xen_start_info->pt_base;
+	size = roundup(xen_start_info->nr_pt_frames * PAGE_SIZE, PMD_SIZE);
+
+	xen_cleanhighmap(addr, addr + size);
+	xen_start_info->pt_base = (unsigned long)__va(__pa(xen_start_info->pt_base));
+#ifdef DEBUG
+	/* This is superflous and is not neccessary, but you know what
+	 * lets do it. The MODULES_VADDR -> MODULES_END should be clear of
+	 * anything at this stage. */
+	xen_cleanhighmap(MODULES_VADDR, roundup(MODULES_VADDR, PUD_SIZE) - 1);
+#endif
+skip:
+#endif
 	xen_post_allocator_init();
 }
-
 static void xen_write_cr2(unsigned long cr2)
 {
 	this_cpu_read(xen_vcpu)->arch.cr2 = cr2;
@@ -1283,7 +1355,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
 
 	args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
-	if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
+	if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
 		args->op.cmd = MMUEXT_INVLPG_MULTI;
 		args->op.arg1.linear_addr = start;
 	}
@@ -1655,7 +1727,7 @@ static void set_page_prot(void *addr, pgprot_t prot)
 	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
 		BUG();
 }
-
+#ifdef CONFIG_X86_32
 static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
 {
 	unsigned pmdidx, pteidx;
@@ -1706,7 +1778,7 @@ static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
 
 	set_page_prot(pmd, PAGE_KERNEL_RO);
 }
-
+#endif
 void __init xen_setup_machphys_mapping(void)
 {
 	struct xen_machphys_mapping mapping;
@@ -1734,7 +1806,20 @@ static void convert_pfn_mfn(void *v)
 	for (i = 0; i < PTRS_PER_PTE; i++)
 		pte[i] = xen_make_pte(pte[i].pte);
 }
-
+static void __init check_pt_base(unsigned long *pt_base, unsigned long *pt_end,
+				 unsigned long addr)
+{
+	if (*pt_base == PFN_DOWN(__pa(addr))) {
+		set_page_prot((void *)addr, PAGE_KERNEL);
+		clear_page((void *)addr);
+		(*pt_base)++;
+	}
+	if (*pt_end == PFN_DOWN(__pa(addr))) {
+		set_page_prot((void *)addr, PAGE_KERNEL);
+		clear_page((void *)addr);
+		(*pt_end)--;
+	}
+}
 /*
  * Set up the initial kernel pagetable.
  *
@@ -1746,11 +1831,13 @@ static void convert_pfn_mfn(void *v)
  * of the physical mapping once some sort of allocator has been set
  * up.
  */
-pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
-					 unsigned long max_pfn)
+void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
 {
 	pud_t *l3;
 	pmd_t *l2;
+	unsigned long addr[3];
+	unsigned long pt_base, pt_end;
+	unsigned i;
 
 	/* max_pfn_mapped is the last pfn mapped in the initial memory
 	 * mappings. Considering that on Xen after the kernel mappings we
@@ -1758,32 +1845,53 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 	 * set max_pfn_mapped to the last real pfn mapped. */
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->mfn_list));
 
+	pt_base = PFN_DOWN(__pa(xen_start_info->pt_base));
+	pt_end = pt_base + xen_start_info->nr_pt_frames;
+
 	/* Zap identity mapping */
 	init_level4_pgt[0] = __pgd(0);
 
 	/* Pre-constructed entries are in pfn, so convert to mfn */
+	/* L4[272] -> level3_ident_pgt
+	 * L4[511] -> level3_kernel_pgt */
 	convert_pfn_mfn(init_level4_pgt);
+
+	/* L3_i[0] -> level2_ident_pgt */
 	convert_pfn_mfn(level3_ident_pgt);
+	/* L3_k[510] -> level2_kernel_pgt
+	 * L3_i[511] -> level2_fixmap_pgt */
 	convert_pfn_mfn(level3_kernel_pgt);
 
+	/* We get [511][511] and have Xen's version of level2_kernel_pgt */
 	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
 	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
 
-	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-
+	addr[0] = (unsigned long)pgd;
+	addr[1] = (unsigned long)l3;
+	addr[2] = (unsigned long)l2;
+	/* Graft it onto L4[272][0]. Note that we creating an aliasing problem:
+	 * Both L4[272][0] and L4[511][511] have entries that point to the same
+	 * L2 (PMD) tables. Meaning that if you modify it in __va space
+	 * it will be also modified in the __ka space! (But if you just
+	 * modify the PMD table to point to other PTE's or none, then you
+	 * are OK - which is what cleanup_highmap does) */
+	copy_page(level2_ident_pgt, l2);
+	/* Graft it onto L4[511][511] */
+	copy_page(level2_kernel_pgt, l2);
+
+	/* Get [511][510] and graft that in level2_fixmap_pgt */
 	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
 	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
-	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	/* Set up identity map */
-	xen_map_identity_early(level2_ident_pgt, max_pfn);
+	copy_page(level2_fixmap_pgt, l2);
+	/* Note that we don't do anything with level1_fixmap_pgt which
+	 * we don't need. */
 
 	/* Make pagetable pieces RO */
 	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+	set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
 	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
 
@@ -1794,22 +1902,28 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 	/* Unpin Xen-provided one */
 	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	/* Switch over */
-	pgd = init_level4_pgt;
-
 	/*
 	 * At this stage there can be no user pgd, and no page
 	 * structure to attach it to, so make sure we just set kernel
 	 * pgd.
 	 */
 	xen_mc_batch();
-	__xen_write_cr3(true, __pa(pgd));
+	__xen_write_cr3(true, __pa(init_level4_pgt));
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 
-	memblock_reserve(__pa(xen_start_info->pt_base),
-			 xen_start_info->nr_pt_frames * PAGE_SIZE);
+	/* We can't that easily rip out L3 and L2, as the Xen pagetables are
+	 * set out this way: [L4], [L1], [L2], [L3], [L1], [L1] ...  for
+	 * the initial domain. For guests using the toolstack, they are in:
+	 * [L4], [L3], [L2], [L1], [L1], order .. So for dom0 we can only
+	 * rip out the [L4] (pgd), but for guests we shave off three pages.
+	 */
+	for (i = 0; i < ARRAY_SIZE(addr); i++)
+		check_pt_base(&pt_base, &pt_end, addr[i]);
 
-	return pgd;
+	/* Our (by three pages) smaller Xen pagetable that we are using */
+	memblock_reserve(PFN_PHYS(pt_base), (pt_end - pt_base) * PAGE_SIZE);
+	/* Revector the xen_start_info */
+	xen_start_info = (struct start_info *)__va(__pa(xen_start_info));
 }
 #else	/* !CONFIG_X86_64 */
 static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
@@ -1834,8 +1948,7 @@ static void __init xen_write_cr3_init(unsigned long cr3)
 	 */
 	swapper_kernel_pmd =
 		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
-	memcpy(swapper_kernel_pmd, initial_kernel_pmd,
-	       sizeof(pmd_t) * PTRS_PER_PMD);
+	copy_page(swapper_kernel_pmd, initial_kernel_pmd);
 	swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
 		__pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
 	set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
@@ -1852,8 +1965,7 @@ static void __init xen_write_cr3_init(unsigned long cr3)
 	pv_mmu_ops.write_cr3 = &xen_write_cr3;
 }
 
-pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
-					 unsigned long max_pfn)
+void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
 {
 	pmd_t *kernel_pmd;
 
@@ -1865,11 +1977,11 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 				  512*1024);
 
 	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+	copy_page(initial_kernel_pmd, kernel_pmd);
 
 	xen_map_identity_early(initial_kernel_pmd, max_pfn);
 
-	memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	copy_page(initial_page_table, pgd);
 	initial_page_table[KERNEL_PGD_BOUNDARY] =
 		__pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
 
@@ -1885,8 +1997,6 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 
 	memblock_reserve(__pa(xen_start_info->pt_base),
 			 xen_start_info->nr_pt_frames * PAGE_SIZE);
-
-	return initial_page_table;
 }
 #endif	/* CONFIG_X86_64 */
 
@@ -2068,8 +2178,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initconst = {
 void __init xen_init_mmu_ops(void)
 {
 	x86_init.mapping.pagetable_reserve = xen_mapping_pagetable_reserve;
-	x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start;
-	x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
+	x86_init.paging.pagetable_init = xen_pagetable_init;
 	pv_mmu_ops = xen_mmu_ops;
 
 	memset(dummy_mapping, 0xff, PAGE_SIZE);
@@ -2337,6 +2446,9 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
 	unsigned long range;
 	int err = 0;
 
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return -EINVAL;
+
 	prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP);
 
 	BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) ==
@@ -2355,8 +2467,8 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
 		if (err)
 			goto out;
 
-		err = -EFAULT;
-		if (HYPERVISOR_mmu_update(mmu_update, batch, NULL, domid) < 0)
+		err = HYPERVISOR_mmu_update(mmu_update, batch, NULL, domid);
+		if (err < 0)
 			goto out;
 
 		nr -= batch;
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 64effdc6da94..95fb2aa5927e 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -22,7 +22,7 @@
  *
  * P2M_PER_PAGE depends on the architecture, as a mfn is always
  * unsigned long (8 bytes on 64-bit, 4 bytes on 32), leading to
- * 512 and 1024 entries respectively. 
+ * 512 and 1024 entries respectively.
  *
  * In short, these structures contain the Machine Frame Number (MFN) of the PFN.
  *
@@ -139,11 +139,11 @@
  *      /    | ~0, ~0, ....  |
  *     |     \---------------/
  *     |
- *     p2m_missing             p2m_missing
- * /------------------\     /------------\
- * | [p2m_mid_missing]+---->| ~0, ~0, ~0 |
- * | [p2m_mid_missing]+---->| ..., ~0    |
- * \------------------/     \------------/
+ *   p2m_mid_missing           p2m_missing
+ * /-----------------\     /------------\
+ * | [p2m_missing]   +---->| ~0, ~0, ~0 |
+ * | [p2m_missing]   +---->| ..., ~0    |
+ * \-----------------/     \------------/
  *
  * where ~0 is INVALID_P2M_ENTRY. IDENTITY is (PFN | IDENTITY_BIT)
  */
@@ -194,6 +194,13 @@ RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID
  * boundary violation will require three middle nodes. */
 RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3);
 
+/* When we populate back during bootup, the amount of pages can vary. The
+ * max we have is seen is 395979, but that does not mean it can't be more.
+ * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle
+ * it can re-use Xen provided mfn_list array, so we only need to allocate at
+ * most three P2M top nodes. */
+RESERVE_BRK(p2m_populated, PAGE_SIZE * 3);
+
 static inline unsigned p2m_top_index(unsigned long pfn)
 {
 	BUG_ON(pfn >= MAX_P2M_PFN);
@@ -389,7 +396,85 @@ void __init xen_build_dynamic_phys_to_machine(void)
 
 	m2p_override_init();
 }
+#ifdef CONFIG_X86_64
+#include <linux/bootmem.h>
+unsigned long __init xen_revector_p2m_tree(void)
+{
+	unsigned long va_start;
+	unsigned long va_end;
+	unsigned long pfn;
+	unsigned long pfn_free = 0;
+	unsigned long *mfn_list = NULL;
+	unsigned long size;
+
+	va_start = xen_start_info->mfn_list;
+	/*We copy in increments of P2M_PER_PAGE * sizeof(unsigned long),
+	 * so make sure it is rounded up to that */
+	size = PAGE_ALIGN(xen_start_info->nr_pages * sizeof(unsigned long));
+	va_end = va_start + size;
+
+	/* If we were revectored already, don't do it again. */
+	if (va_start <= __START_KERNEL_map && va_start >= __PAGE_OFFSET)
+		return 0;
+
+	mfn_list = alloc_bootmem_align(size, PAGE_SIZE);
+	if (!mfn_list) {
+		pr_warn("Could not allocate space for a new P2M tree!\n");
+		return xen_start_info->mfn_list;
+	}
+	/* Fill it out with INVALID_P2M_ENTRY value */
+	memset(mfn_list, 0xFF, size);
+
+	for (pfn = 0; pfn < ALIGN(MAX_DOMAIN_PAGES, P2M_PER_PAGE); pfn += P2M_PER_PAGE) {
+		unsigned topidx = p2m_top_index(pfn);
+		unsigned mididx;
+		unsigned long *mid_p;
+
+		if (!p2m_top[topidx])
+			continue;
+
+		if (p2m_top[topidx] == p2m_mid_missing)
+			continue;
+
+		mididx = p2m_mid_index(pfn);
+		mid_p = p2m_top[topidx][mididx];
+		if (!mid_p)
+			continue;
+		if ((mid_p == p2m_missing) || (mid_p == p2m_identity))
+			continue;
+
+		if ((unsigned long)mid_p == INVALID_P2M_ENTRY)
+			continue;
+
+		/* The old va. Rebase it on mfn_list */
+		if (mid_p >= (unsigned long *)va_start && mid_p <= (unsigned long *)va_end) {
+			unsigned long *new;
 
+			if (pfn_free  > (size / sizeof(unsigned long))) {
+				WARN(1, "Only allocated for %ld pages, but we want %ld!\n",
+				     size / sizeof(unsigned long), pfn_free);
+				return 0;
+			}
+			new = &mfn_list[pfn_free];
+
+			copy_page(new, mid_p);
+			p2m_top[topidx][mididx] = &mfn_list[pfn_free];
+			p2m_top_mfn_p[topidx][mididx] = virt_to_mfn(&mfn_list[pfn_free]);
+
+			pfn_free += P2M_PER_PAGE;
+
+		}
+		/* This should be the leafs allocated for identity from _brk. */
+	}
+	return (unsigned long)mfn_list;
+
+}
+#else
+unsigned long __init xen_revector_p2m_tree(void)
+{
+	return 0;
+}
+#endif
 unsigned long get_phys_to_machine(unsigned long pfn)
 {
 	unsigned topidx, mididx, idx;
@@ -423,7 +508,7 @@ static void free_p2m_page(void *p)
 	free_page((unsigned long)p);
 }
 
-/* 
+/*
  * Fully allocate the p2m structure for a given pfn.  We need to check
  * that both the top and mid levels are allocated, and make sure the
  * parallel mfn tree is kept in sync.  We may race with other cpus, so
@@ -570,12 +655,99 @@ static bool __init early_alloc_p2m(unsigned long pfn)
 	}
 	return true;
 }
+
+/*
+ * Skim over the P2M tree looking at pages that are either filled with
+ * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and
+ * replace the P2M leaf with a p2m_missing or p2m_identity.
+ * Stick the old page in the new P2M tree location.
+ */
+bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn)
+{
+	unsigned topidx;
+	unsigned mididx;
+	unsigned ident_pfns;
+	unsigned inv_pfns;
+	unsigned long *p2m;
+	unsigned long *mid_mfn_p;
+	unsigned idx;
+	unsigned long pfn;
+
+	/* We only look when this entails a P2M middle layer */
+	if (p2m_index(set_pfn))
+		return false;
+
+	for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
+		topidx = p2m_top_index(pfn);
+
+		if (!p2m_top[topidx])
+			continue;
+
+		if (p2m_top[topidx] == p2m_mid_missing)
+			continue;
+
+		mididx = p2m_mid_index(pfn);
+		p2m = p2m_top[topidx][mididx];
+		if (!p2m)
+			continue;
+
+		if ((p2m == p2m_missing) || (p2m == p2m_identity))
+			continue;
+
+		if ((unsigned long)p2m == INVALID_P2M_ENTRY)
+			continue;
+
+		ident_pfns = 0;
+		inv_pfns = 0;
+		for (idx = 0; idx < P2M_PER_PAGE; idx++) {
+			/* IDENTITY_PFNs are 1:1 */
+			if (p2m[idx] == IDENTITY_FRAME(pfn + idx))
+				ident_pfns++;
+			else if (p2m[idx] == INVALID_P2M_ENTRY)
+				inv_pfns++;
+			else
+				break;
+		}
+		if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE))
+			goto found;
+	}
+	return false;
+found:
+	/* Found one, replace old with p2m_identity or p2m_missing */
+	p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing);
+	/* And the other for save/restore.. */
+	mid_mfn_p = p2m_top_mfn_p[topidx];
+	/* NOTE: Even if it is a p2m_identity it should still be point to
+	 * a page filled with INVALID_P2M_ENTRY entries. */
+	mid_mfn_p[mididx] = virt_to_mfn(p2m_missing);
+
+	/* Reset where we want to stick the old page in. */
+	topidx = p2m_top_index(set_pfn);
+	mididx = p2m_mid_index(set_pfn);
+
+	/* This shouldn't happen */
+	if (WARN_ON(p2m_top[topidx] == p2m_mid_missing))
+		early_alloc_p2m(set_pfn);
+
+	if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing))
+		return false;
+
+	p2m_init(p2m);
+	p2m_top[topidx][mididx] = p2m;
+	mid_mfn_p = p2m_top_mfn_p[topidx];
+	mid_mfn_p[mididx] = virt_to_mfn(p2m);
+
+	return true;
+}
 bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 {
 	if (unlikely(!__set_phys_to_machine(pfn, mfn)))  {
 		if (!early_alloc_p2m(pfn))
 			return false;
 
+		if (early_can_reuse_p2m_middle(pfn, mfn))
+			return __set_phys_to_machine(pfn, mfn);
+
 		if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/))
 			return false;
 
@@ -734,9 +906,6 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 
 			xen_mc_issue(PARAVIRT_LAZY_MMU);
 		}
-		/* let's use dev_bus_addr to record the old mfn instead */
-		kmap_op->dev_bus_addr = page->index;
-		page->index = (unsigned long) kmap_op;
 	}
 	spin_lock_irqsave(&m2p_override_lock, flags);
 	list_add(&page->lru,  &m2p_overrides[mfn_hash(mfn)]);
@@ -763,7 +932,8 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_add_override);
-int m2p_remove_override(struct page *page, bool clear_pte)
+int m2p_remove_override(struct page *page,
+		struct gnttab_map_grant_ref *kmap_op)
 {
 	unsigned long flags;
 	unsigned long mfn;
@@ -793,10 +963,8 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 	WARN_ON(!PagePrivate(page));
 	ClearPagePrivate(page);
 
-	if (clear_pte) {
-		struct gnttab_map_grant_ref *map_op =
-			(struct gnttab_map_grant_ref *) page->index;
-		set_phys_to_machine(pfn, map_op->dev_bus_addr);
+	set_phys_to_machine(pfn, page->index);
+	if (kmap_op != NULL) {
 		if (!PageHighMem(page)) {
 			struct multicall_space mcs;
 			struct gnttab_unmap_grant_ref *unmap_op;
@@ -808,13 +976,13 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 			 * issued. In this case handle is going to -1 because
 			 * it hasn't been modified yet.
 			 */
-			if (map_op->handle == -1)
+			if (kmap_op->handle == -1)
 				xen_mc_flush();
 			/*
-			 * Now if map_op->handle is negative it means that the
+			 * Now if kmap_op->handle is negative it means that the
 			 * hypercall actually returned an error.
 			 */
-			if (map_op->handle == GNTST_general_error) {
+			if (kmap_op->handle == GNTST_general_error) {
 				printk(KERN_WARNING "m2p_remove_override: "
 						"pfn %lx mfn %lx, failed to modify kernel mappings",
 						pfn, mfn);
@@ -824,8 +992,8 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 			mcs = xen_mc_entry(
 					sizeof(struct gnttab_unmap_grant_ref));
 			unmap_op = mcs.args;
-			unmap_op->host_addr = map_op->host_addr;
-			unmap_op->handle = map_op->handle;
+			unmap_op->host_addr = kmap_op->host_addr;
+			unmap_op->handle = kmap_op->handle;
 			unmap_op->dev_bus_addr = 0;
 
 			MULTI_grant_table_op(mcs.mc,
@@ -836,10 +1004,9 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 			set_pte_at(&init_mm, address, ptep,
 					pfn_pte(pfn, PAGE_KERNEL));
 			__flush_tlb_single(address);
-			map_op->host_addr = 0;
+			kmap_op->host_addr = 0;
 		}
-	} else
-		set_phys_to_machine(pfn, page->index);
+	}
 
 	/* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
 	 * somewhere in this domain, even before being added to the
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index 967633ad98c4..969570491c39 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -8,6 +8,14 @@
 #include <xen/xen.h>
 #include <asm/iommu_table.h>
 
+
+#include <asm/xen/swiotlb-xen.h>
+#ifdef CONFIG_X86_64
+#include <asm/iommu.h>
+#include <asm/dma.h>
+#endif
+#include <linux/export.h>
+
 int xen_swiotlb __read_mostly;
 
 static struct dma_map_ops xen_swiotlb_dma_ops = {
@@ -34,34 +42,64 @@ static struct dma_map_ops xen_swiotlb_dma_ops = {
 int __init pci_xen_swiotlb_detect(void)
 {
 
+	if (!xen_pv_domain())
+		return 0;
+
 	/* If running as PV guest, either iommu=soft, or swiotlb=force will
 	 * activate this IOMMU. If running as PV privileged, activate it
 	 * irregardless.
 	 */
-	if ((xen_initial_domain() || swiotlb || swiotlb_force) &&
-	    (xen_pv_domain()))
+	if ((xen_initial_domain() || swiotlb || swiotlb_force))
 		xen_swiotlb = 1;
 
 	/* If we are running under Xen, we MUST disable the native SWIOTLB.
 	 * Don't worry about swiotlb_force flag activating the native, as
 	 * the 'swiotlb' flag is the only one turning it on. */
-	if (xen_pv_domain())
-		swiotlb = 0;
+	swiotlb = 0;
 
+#ifdef CONFIG_X86_64
+	/* pci_swiotlb_detect_4gb turns on native SWIOTLB if no_iommu == 0
+	 * (so no iommu=X command line over-writes).
+	 * Considering that PV guests do not want the *native SWIOTLB* but
+	 * only Xen SWIOTLB it is not useful to us so set no_iommu=1 here.
+	 */
+	if (max_pfn > MAX_DMA32_PFN)
+		no_iommu = 1;
+#endif
 	return xen_swiotlb;
 }
 
 void __init pci_xen_swiotlb_init(void)
 {
 	if (xen_swiotlb) {
-		xen_swiotlb_init(1);
+		xen_swiotlb_init(1, true /* early */);
 		dma_ops = &xen_swiotlb_dma_ops;
 
 		/* Make sure ACS will be enabled */
 		pci_request_acs();
 	}
 }
+
+int pci_xen_swiotlb_init_late(void)
+{
+	int rc;
+
+	if (xen_swiotlb)
+		return 0;
+
+	rc = xen_swiotlb_init(1, false /* late */);
+	if (rc)
+		return rc;
+
+	dma_ops = &xen_swiotlb_dma_ops;
+	/* Make sure ACS will be enabled */
+	pci_request_acs();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_xen_swiotlb_init_late);
+
 IOMMU_INIT_FINISH(pci_xen_swiotlb_detect,
-		  0,
+		  NULL,
 		  pci_xen_swiotlb_init,
-		  0);
+		  NULL);
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
index ffcf2615640b..0a7852483ffe 100644
--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 
 #include <xen/platform_pci.h>
+#include "xen-ops.h"
 
 #define XEN_PLATFORM_ERR_MAGIC -1
 #define XEN_PLATFORM_ERR_PROTOCOL -2
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index ead85576d54a..8971a26d21ab 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -17,6 +17,7 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 #include <asm/acpi.h>
+#include <asm/numa.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 
@@ -78,9 +79,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size)
 	memblock_reserve(start, size);
 
 	xen_max_p2m_pfn = PFN_DOWN(start + size);
+	for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) {
+		unsigned long mfn = pfn_to_mfn(pfn);
+
+		if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn))
+			continue;
+		WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n",
+			pfn, mfn);
 
-	for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++)
 		__set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+	}
 }
 
 static unsigned long __init xen_do_chunk(unsigned long start,
@@ -424,6 +432,24 @@ char * __init xen_memory_setup(void)
 	 *  - mfn_list
 	 *  - xen_start_info
 	 * See comment above "struct start_info" in <xen/interface/xen.h>
+	 * We tried to make the the memblock_reserve more selective so
+	 * that it would be clear what region is reserved. Sadly we ran
+	 * in the problem wherein on a 64-bit hypervisor with a 32-bit
+	 * initial domain, the pt_base has the cr3 value which is not
+	 * neccessarily where the pagetable starts! As Jan put it: "
+	 * Actually, the adjustment turns out to be correct: The page
+	 * tables for a 32-on-64 dom0 get allocated in the order "first L1",
+	 * "first L2", "first L3", so the offset to the page table base is
+	 * indeed 2. When reading xen/include/public/xen.h's comment
+	 * very strictly, this is not a violation (since there nothing is said
+	 * that the first thing in the page table space is pointed to by
+	 * pt_base; I admit that this seems to be implied though, namely
+	 * do I think that it is implied that the page table space is the
+	 * range [pt_base, pt_base + nt_pt_frames), whereas that
+	 * range here indeed is [pt_base - 2, pt_base - 2 + nt_pt_frames),
+	 * which - without a priori knowledge - the kernel would have
+	 * difficulty to figure out)." - so lets just fall back to the
+	 * easy way and reserve the whole region.
 	 */
 	memblock_reserve(__pa(xen_start_info->mfn_list),
 			 xen_start_info->pt_base - xen_start_info->mfn_list);
@@ -537,4 +563,7 @@ void __init xen_arch_setup(void)
 	disable_cpufreq();
 	WARN_ON(set_pm_idle_to_default());
 	fiddle_vdso();
+#ifdef CONFIG_NUMA
+	numa_off = 1;
+#endif
 }
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index f58dca7a6e52..353c50f18702 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -377,7 +377,8 @@ static int __cpuinit xen_cpu_up(unsigned int cpu, struct task_struct *idle)
 		return rc;
 
 	if (num_online_cpus() == 1)
-		alternatives_smp_switch(1);
+		/* Just in case we booted with a single CPU. */
+		alternatives_enable_smp();
 
 	rc = xen_smp_intr_init(cpu);
 	if (rc)
@@ -424,9 +425,6 @@ static void xen_cpu_die(unsigned int cpu)
 	unbind_from_irqhandler(per_cpu(xen_irq_work, cpu), NULL);
 	xen_uninit_lock_cpu(cpu);
 	xen_teardown_timer(cpu);
-
-	if (num_online_cpus() == 1)
-		alternatives_smp_switch(0);
 }
 
 static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index ae8a00c39de4..45329c8c226e 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled)
 {
 #ifdef CONFIG_XEN_PVHVM
 	int cpu;
-	xen_hvm_resume_shared_info();
+	xen_hvm_init_shared_info();
 	xen_callback_vector();
 	xen_unplug_emulated_devices();
 	if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
diff --git a/arch/x86/xen/vga.c b/arch/x86/xen/vga.c
index 1cd7f4d11e29..6722e3733f02 100644
--- a/arch/x86/xen/vga.c
+++ b/arch/x86/xen/vga.c
@@ -35,6 +35,7 @@ void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size)
 			info->u.text_mode_3.font_height;
 		break;
 
+	case XEN_VGATYPE_EFI_LFB:
 	case XEN_VGATYPE_VESA_LFB:
 		if (size < offsetof(struct dom0_vga_console_info,
 				    u.vesa_lfb.gbl_caps))
@@ -54,6 +55,12 @@ void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size)
 		screen_info->blue_pos = info->u.vesa_lfb.blue_pos;
 		screen_info->rsvd_size = info->u.vesa_lfb.rsvd_size;
 		screen_info->rsvd_pos = info->u.vesa_lfb.rsvd_pos;
+
+		if (info->video_type == XEN_VGATYPE_EFI_LFB) {
+			screen_info->orig_video_isVGA = VIDEO_TYPE_EFI;
+			break;
+		}
+
 		if (size >= offsetof(struct dom0_vga_console_info,
 				     u.vesa_lfb.gbl_caps)
 		    + sizeof(info->u.vesa_lfb.gbl_caps))
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index aaa7291c9259..7faed5869e5b 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -28,9 +28,61 @@ ENTRY(startup_xen)
 	__FINIT
 
 .pushsection .text
-	.align PAGE_SIZE
+	.balign PAGE_SIZE
 ENTRY(hypercall_page)
-	.skip PAGE_SIZE
+#define NEXT_HYPERCALL(x) \
+	ENTRY(xen_hypercall_##x) \
+	.skip 32
+
+NEXT_HYPERCALL(set_trap_table)
+NEXT_HYPERCALL(mmu_update)
+NEXT_HYPERCALL(set_gdt)
+NEXT_HYPERCALL(stack_switch)
+NEXT_HYPERCALL(set_callbacks)
+NEXT_HYPERCALL(fpu_taskswitch)
+NEXT_HYPERCALL(sched_op_compat)
+NEXT_HYPERCALL(platform_op)
+NEXT_HYPERCALL(set_debugreg)
+NEXT_HYPERCALL(get_debugreg)
+NEXT_HYPERCALL(update_descriptor)
+NEXT_HYPERCALL(ni)
+NEXT_HYPERCALL(memory_op)
+NEXT_HYPERCALL(multicall)
+NEXT_HYPERCALL(update_va_mapping)
+NEXT_HYPERCALL(set_timer_op)
+NEXT_HYPERCALL(event_channel_op_compat)
+NEXT_HYPERCALL(xen_version)
+NEXT_HYPERCALL(console_io)
+NEXT_HYPERCALL(physdev_op_compat)
+NEXT_HYPERCALL(grant_table_op)
+NEXT_HYPERCALL(vm_assist)
+NEXT_HYPERCALL(update_va_mapping_otherdomain)
+NEXT_HYPERCALL(iret)
+NEXT_HYPERCALL(vcpu_op)
+NEXT_HYPERCALL(set_segment_base)
+NEXT_HYPERCALL(mmuext_op)
+NEXT_HYPERCALL(xsm_op)
+NEXT_HYPERCALL(nmi_op)
+NEXT_HYPERCALL(sched_op)
+NEXT_HYPERCALL(callback_op)
+NEXT_HYPERCALL(xenoprof_op)
+NEXT_HYPERCALL(event_channel_op)
+NEXT_HYPERCALL(physdev_op)
+NEXT_HYPERCALL(hvm_op)
+NEXT_HYPERCALL(sysctl)
+NEXT_HYPERCALL(domctl)
+NEXT_HYPERCALL(kexec_op)
+NEXT_HYPERCALL(tmem_op) /* 38 */
+ENTRY(xen_hypercall_rsvr)
+	.skip 320
+NEXT_HYPERCALL(mca) /* 48 */
+NEXT_HYPERCALL(arch_1)
+NEXT_HYPERCALL(arch_2)
+NEXT_HYPERCALL(arch_3)
+NEXT_HYPERCALL(arch_4)
+NEXT_HYPERCALL(arch_5)
+NEXT_HYPERCALL(arch_6)
+	.balign PAGE_SIZE
 .popsection
 
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 1e4329e04e0f..a95b41744ad0 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -27,7 +27,7 @@ void xen_setup_mfn_list_list(void);
 void xen_setup_shared_info(void);
 void xen_build_mfn_list_list(void);
 void xen_setup_machphys_mapping(void);
-pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
+void xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
 void xen_reserve_top(void);
 extern unsigned long xen_max_p2m_pfn;
 
@@ -35,16 +35,16 @@ void xen_set_pat(u64);
 
 char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
-void __init xen_init_IRQ(void);
 void xen_enable_sysenter(void);
 void xen_enable_syscall(void);
 void xen_vcpu_restore(void);
 
 void xen_callback_vector(void);
-void xen_hvm_resume_shared_info(void);
+void xen_hvm_init_shared_info(void);
 void xen_unplug_emulated_devices(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
+unsigned long __init xen_revector_p2m_tree(void);
 
 void xen_init_irq_ops(void);
 void xen_setup_timer(int cpu);
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 8ed64cfae4ff..744f5ee4ba41 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -172,24 +172,6 @@ config CMDLINE
 
 source "mm/Kconfig"
 
-config HOTPLUG
-	bool "Support for hot-pluggable devices"
-	help
-	  Say Y here if you want to plug devices into your computer while
-	  the system is running, and be able to use them quickly.  In many
-	  cases, the devices can likewise be unplugged at any time too.
-
-	  One well known example of this is PCMCIA- or PC-cards, credit-card
-	  size devices such as network cards, modems or hard drives which are
-	  plugged into slots found on all modern laptop computers.  Another
-	  example, used on modern desktops as well as laptops, is USB.
-
-	  Enable HOTPLUG and build a modular kernel.  Get agent software
-	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
-	  Then your kernel will automatically call out to a user mode "policy
-	  agent" (/sbin/hotplug) to load modules and set up software needed
-	  to use devices as you hotplug them.
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h
index 6e65eadaae14..5293312bc6a4 100644
--- a/arch/xtensa/include/asm/elf.h
+++ b/arch/xtensa/include/asm/elf.h
@@ -189,7 +189,8 @@ typedef struct {
 #endif
 } elf_xtregs_t;
 
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
 
 struct task_struct;
 
diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..baebb3da1d44
--- /dev/null
+++ b/arch/xtensa/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index 69759e9cb3ea..54354de38a70 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -210,14 +210,6 @@ void pcibios_set_master(struct pci_dev *dev)
 	/* No special bus mastering setup handling */
 }
 
-/* the next one is stolen from the alpha port... */
-
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
 	u16 cmd, old_cmd;
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 2c8d6a3d250a..bc44311aa18c 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -31,6 +31,7 @@
 #include <linux/mqueue.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/rcupdate.h>
 
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
@@ -110,8 +111,10 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
+		rcu_idle_enter();
 		while (!need_resched())
 			platform_idle();
+		rcu_idle_exit();
 		schedule_preempt_disabled();
 	}
 }
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index f9726f6afdf1..2cd3d3a3400b 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -223,6 +223,7 @@ int __init rs_init(void)
 	serial_driver->flags = TTY_DRIVER_REAL_RAW;
 
 	tty_set_operations(serial_driver, &serial_ops);
+	tty_port_link_device(&serial_port, serial_driver, 0);
 
 	if (tty_register_driver(serial_driver))
 		panic("Couldn't register serial driver\n");