diff options
Diffstat (limited to 'drivers/acpi/acpica/psloop.c')
| -rw-r--r-- | drivers/acpi/acpica/psloop.c | 1088 |
1 files changed, 1088 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c new file mode 100644 index 000000000000..c5f6ce19a401 --- /dev/null +++ b/drivers/acpi/acpica/psloop.c @@ -0,0 +1,1088 @@ +/****************************************************************************** + * + * Module Name: psloop - Main AML parse loop + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +/* + * Parse the AML and build an operation tree as most interpreters, (such as + * Perl) do. Parsing is done by hand rather than with a YACC generated parser + * to tightly constrain stack and dynamic memory usage. Parsing is kept + * flexible and the code fairly compact by parsing based on a list of AML + * opcode templates in aml_op_info[]. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acparser.h" +#include "acdispat.h" +#include "amlcode.h" + +#define _COMPONENT ACPI_PARSER +ACPI_MODULE_NAME("psloop") + +static u32 acpi_gbl_depth = 0; + +/* Local prototypes */ + +static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state); + +static acpi_status +acpi_ps_build_named_op(struct acpi_walk_state *walk_state, + u8 * aml_op_start, + union acpi_parse_object *unnamed_op, + union acpi_parse_object **op); + +static acpi_status +acpi_ps_create_op(struct acpi_walk_state *walk_state, + u8 * aml_op_start, union acpi_parse_object **new_op); + +static acpi_status +acpi_ps_get_arguments(struct acpi_walk_state *walk_state, + u8 * aml_op_start, union acpi_parse_object *op); + +static acpi_status +acpi_ps_complete_op(struct acpi_walk_state *walk_state, + union acpi_parse_object **op, acpi_status status); + +static acpi_status +acpi_ps_complete_final_op(struct acpi_walk_state *walk_state, + union acpi_parse_object *op, acpi_status status); + +/******************************************************************************* + * + * FUNCTION: acpi_ps_get_aml_opcode + * + * PARAMETERS: walk_state - Current state + * + * RETURN: Status + * + * DESCRIPTION: Extract the next AML opcode from the input stream. + * + ******************************************************************************/ + +static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state) +{ + + ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state); + + walk_state->aml_offset = + (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml, + walk_state->parser_state.aml_start); + walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state)); + + /* + * First cut to determine what we have found: + * 1) A valid AML opcode + * 2) A name string + * 3) An unknown/invalid opcode + */ + walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode); + + switch (walk_state->op_info->class) { + case AML_CLASS_ASCII: + case AML_CLASS_PREFIX: + /* + * Starts with a valid prefix or ASCII char, this is a name + * string. Convert the bare name string to a namepath. + */ + walk_state->opcode = AML_INT_NAMEPATH_OP; + walk_state->arg_types = ARGP_NAMESTRING; + break; + + case AML_CLASS_UNKNOWN: + + /* The opcode is unrecognized. Just skip unknown opcodes */ + + ACPI_ERROR((AE_INFO, + "Found unknown opcode %X at AML address %p offset %X, ignoring", + walk_state->opcode, walk_state->parser_state.aml, + walk_state->aml_offset)); + + ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128); + + /* Assume one-byte bad opcode */ + + walk_state->parser_state.aml++; + return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE); + + default: + + /* Found opcode info, this is a normal opcode */ + + walk_state->parser_state.aml += + acpi_ps_get_opcode_size(walk_state->opcode); + walk_state->arg_types = walk_state->op_info->parse_args; + break; + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ps_build_named_op + * + * PARAMETERS: walk_state - Current state + * aml_op_start - Begin of named Op in AML + * unnamed_op - Early Op (not a named Op) + * Op - Returned Op + * + * RETURN: Status + * + * DESCRIPTION: Parse a named Op + * + ******************************************************************************/ + +static acpi_status +acpi_ps_build_named_op(struct acpi_walk_state *walk_state, + u8 * aml_op_start, + union acpi_parse_object *unnamed_op, + union acpi_parse_object **op) +{ + acpi_status status = AE_OK; + union acpi_parse_object *arg = NULL; + + ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state); + + unnamed_op->common.value.arg = NULL; + unnamed_op->common.arg_list_length = 0; + unnamed_op->common.aml_opcode = walk_state->opcode; + + /* + * Get and append arguments until we find the node that contains + * the name (the type ARGP_NAME). + */ + while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) && + (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) { + status = + acpi_ps_get_next_arg(walk_state, + &(walk_state->parser_state), + GET_CURRENT_ARG_TYPE(walk_state-> + arg_types), &arg); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_ps_append_arg(unnamed_op, arg); + INCREMENT_ARG_LIST(walk_state->arg_types); + } + + /* + * Make sure that we found a NAME and didn't run out of arguments + */ + if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) { + return_ACPI_STATUS(AE_AML_NO_OPERAND); + } + + /* We know that this arg is a name, move to next arg */ + + INCREMENT_ARG_LIST(walk_state->arg_types); + + /* + * Find the object. This will either insert the object into + * the namespace or simply look it up + */ + walk_state->op = NULL; + + status = walk_state->descending_callback(walk_state, op); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog")); + return_ACPI_STATUS(status); + } + + if (!*op) { + return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE); + } + + status = acpi_ps_next_parse_state(walk_state, *op, status); + if (ACPI_FAILURE(status)) { + if (status == AE_CTRL_PENDING) { + return_ACPI_STATUS(AE_CTRL_PARSE_PENDING); + } + return_ACPI_STATUS(status); + } + + acpi_ps_append_arg(*op, unnamed_op->common.value.arg); + acpi_gbl_depth++; + + if ((*op)->common.aml_opcode == AML_REGION_OP || + (*op)->common.aml_opcode == AML_DATA_REGION_OP) { + /* + * Defer final parsing of an operation_region body, because we don't + * have enough info in the first pass to parse it correctly (i.e., + * there may be method calls within the term_arg elements of the body.) + * + * However, we must continue parsing because the opregion is not a + * standalone package -- we don't know where the end is at this point. + * + * (Length is unknown until parse of the body complete) + */ + (*op)->named.data = aml_op_start; + (*op)->named.length = 0; + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ps_create_op + * + * PARAMETERS: walk_state - Current state + * aml_op_start - Op start in AML + * new_op - Returned Op + * + * RETURN: Status + * + * DESCRIPTION: Get Op from AML + * + ******************************************************************************/ + +static acpi_status +acpi_ps_create_op(struct acpi_walk_state *walk_state, + u8 * aml_op_start, union acpi_parse_object **new_op) +{ + acpi_status status = AE_OK; + union acpi_parse_object *op; + union acpi_parse_object *named_op = NULL; + union acpi_parse_object *parent_scope; + u8 argument_count; + const struct acpi_opcode_info *op_info; + + ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state); + + status = acpi_ps_get_aml_opcode(walk_state); + if (status == AE_CTRL_PARSE_CONTINUE) { + return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE); + } + + /* Create Op structure and append to parent's argument list */ + + walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode); + op = acpi_ps_alloc_op(walk_state->opcode); + if (!op) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + if (walk_state->op_info->flags & AML_NAMED) { + status = + acpi_ps_build_named_op(walk_state, aml_op_start, op, + &named_op); + acpi_ps_free_op(op); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + *new_op = named_op; + return_ACPI_STATUS(AE_OK); + } + + /* Not a named opcode, just allocate Op and append to parent */ + + if (walk_state->op_info->flags & AML_CREATE) { + /* + * Backup to beginning of create_xXXfield declaration + * body_length is unknown until we parse the body + */ + op->named.data = aml_op_start; + op->named.length = 0; + } + + if (walk_state->opcode == AML_BANK_FIELD_OP) { + /* + * Backup to beginning of bank_field declaration + * body_length is unknown until we parse the body + */ + op->named.data = aml_op_start; + op->named.length = 0; + } + + parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state)); + acpi_ps_append_arg(parent_scope, op); + + if (parent_scope) { + op_info = + acpi_ps_get_opcode_info(parent_scope->common.aml_opcode); + if (op_info->flags & AML_HAS_TARGET) { + argument_count = + acpi_ps_get_argument_count(op_info->type); + if (parent_scope->common.arg_list_length > + argument_count) { + op->common.flags |= ACPI_PARSEOP_TARGET; + } + } else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) { + op->common.flags |= ACPI_PARSEOP_TARGET; + } + } + + if (walk_state->descending_callback != NULL) { + /* + * Find the object. This will either insert the object into + * the namespace or simply look it up + */ + walk_state->op = *new_op = op; + + status = walk_state->descending_callback(walk_state, &op); + status = acpi_ps_next_parse_state(walk_state, op, status); + if (status == AE_CTRL_PENDING) { + status = AE_CTRL_PARSE_PENDING; + } + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ps_get_arguments + * + * PARAMETERS: walk_state - Current state + * aml_op_start - Op start in AML + * Op - Current Op + * + * RETURN: Status + * + * DESCRIPTION: Get arguments for passed Op. + * + ******************************************************************************/ + +static acpi_status +acpi_ps_get_arguments(struct acpi_walk_state *walk_state, + u8 * aml_op_start, union acpi_parse_object *op) +{ + acpi_status status = AE_OK; + union acpi_parse_object *arg = NULL; + + ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state); + + switch (op->common.aml_opcode) { + case AML_BYTE_OP: /* AML_BYTEDATA_ARG */ + case AML_WORD_OP: /* AML_WORDDATA_ARG */ + case AML_DWORD_OP: /* AML_DWORDATA_ARG */ + case AML_QWORD_OP: /* AML_QWORDATA_ARG */ + case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */ + + /* Fill in constant or string argument directly */ + + acpi_ps_get_next_simple_arg(&(walk_state->parser_state), + GET_CURRENT_ARG_TYPE(walk_state-> + arg_types), + op); + break; + + case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */ + + status = + acpi_ps_get_next_namepath(walk_state, + &(walk_state->parser_state), op, + 1); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + walk_state->arg_types = 0; + break; + + default: + /* + * Op is not a constant or string, append each argument to the Op + */ + while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) + && !walk_state->arg_count) { + walk_state->aml_offset = + (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml, + walk_state->parser_state. + aml_start); + + status = + acpi_ps_get_next_arg(walk_state, + &(walk_state->parser_state), + GET_CURRENT_ARG_TYPE + (walk_state->arg_types), &arg); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + if (arg) { + arg->common.aml_offset = walk_state->aml_offset; + acpi_ps_append_arg(op, arg); + } + + INCREMENT_ARG_LIST(walk_state->arg_types); + } + + /* Special processing for certain opcodes */ + + /* TBD (remove): Temporary mechanism to disable this code if needed */ + +#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE + + if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) && + ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) { + /* + * We want to skip If/Else/While constructs during Pass1 because we + * want to actually conditionally execute the code during Pass2. + * + * Except for disassembly, where we always want to walk the + * If/Else/While packages + */ + switch (op->common.aml_opcode) { + case AML_IF_OP: + case AML_ELSE_OP: + case AML_WHILE_OP: + + ACPI_DEBUG_PRINT((ACPI_DB_PARSE, + "Pass1: Skipping an If/Else/While body\n")); + + /* Skip body of if/else/while in pass 1 */ + + walk_state->parser_state.aml = + walk_state->parser_state.pkg_end; + walk_state->arg_count = 0; + break; + + default: + break; + } + } +#endif + + switch (op->common.aml_opcode) { + case AML_METHOD_OP: + /* + * Skip parsing of control method because we don't have enough + * info in the first pass to parse it correctly. + * + * Save the length and address of the body + */ + op->named.data = walk_state->parser_state.aml; + op->named.length = (u32) + (walk_state->parser_state.pkg_end - + walk_state->parser_state.aml); + + /* Skip body of method */ + + walk_state->parser_state.aml = + walk_state->parser_state.pkg_end; + walk_state->arg_count = 0; + break; + + case AML_BUFFER_OP: + case AML_PACKAGE_OP: + case AML_VAR_PACKAGE_OP: + + if ((op->common.parent) && + (op->common.parent->common.aml_opcode == + AML_NAME_OP) + && (walk_state->pass_number <= + ACPI_IMODE_LOAD_PASS2)) { + /* + * Skip parsing of Buffers and Packages because we don't have + * enough info in the first pass to parse them correctly. + */ + op->named.data = aml_op_start; + op->named.length = (u32) + (walk_state->parser_state.pkg_end - + aml_op_start); + + /* Skip body */ + + walk_state->parser_state.aml = + walk_state->parser_state.pkg_end; + walk_state->arg_count = 0; + } + break; + + case AML_WHILE_OP: + + if (walk_state->control_state) { + walk_state->control_state->control.package_end = + walk_state->parser_state.pkg_end; + } + break; + + default: + + /* No action for all other opcodes */ + break; + } + + break; + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ps_complete_op + * + * PARAMETERS: walk_state - Current state + * Op - Returned Op + * Status - Parse status before complete Op + * + * RETURN: Status + * + * DESCRIPTION: Complete Op + * + ******************************************************************************/ + +static acpi_status +acpi_ps_complete_op(struct acpi_walk_state *walk_state, + union acpi_parse_object **op, acpi_status status) +{ + acpi_status status2; + + ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state); + + /* + * Finished one argument of the containing scope + */ + walk_state->parser_state.scope->parse_scope.arg_count--; + + /* Close this Op (will result in parse subtree deletion) */ + + status2 = acpi_ps_complete_this_op(walk_state, *op); + if (ACPI_FAILURE(status2)) { + return_ACPI_STATUS(status2); + } + + *op = NULL; + + switch (status) { + case AE_OK: + break; + + case AE_CTRL_TRANSFER: + + /* We are about to transfer to a called method */ + + walk_state->prev_op = NULL; + walk_state->prev_arg_types = walk_state->arg_types; + return_ACPI_STATUS(status); + + case AE_CTRL_END: + + acpi_ps_pop_scope(&(walk_state->parser_state), op, + &walk_state->arg_types, + &walk_state->arg_count); + + if (*op) { + walk_state->op = *op; + walk_state->op_info = + acpi_ps_get_opcode_info((*op)->common.aml_opcode); + walk_state->opcode = (*op)->common.aml_opcode; + + status = walk_state->ascending_callback(walk_state); + status = + acpi_ps_next_parse_state(walk_state, *op, status); + + status2 = acpi_ps_complete_this_op(walk_state, *op); + if (ACPI_FAILURE(status2)) { + return_ACPI_STATUS(status2); + } + } + + status = AE_OK; + break; + + case AE_CTRL_BREAK: + case AE_CTRL_CONTINUE: + + /* Pop off scopes until we find the While */ + + while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) { + acpi_ps_pop_scope(&(walk_state->parser_state), op, + &walk_state->arg_types, + &walk_state->arg_count); + } + + /* Close this iteration of the While loop */ + + walk_state->op = *op; + walk_state->op_info = + acpi_ps_get_opcode_info((*op)->common.aml_opcode); + walk_state->opcode = (*op)->common.aml_opcode; + + status = walk_state->ascending_callback(walk_state); + status = acpi_ps_next_parse_state(walk_state, *op, status); + + status2 = acpi_ps_complete_this_op(walk_state, *op); + if (ACPI_FAILURE(status2)) { + return_ACPI_STATUS(status2); + } + + status = AE_OK; + break; + + case AE_CTRL_TERMINATE: + + /* Clean up */ + do { + if (*op) { + status2 = + acpi_ps_complete_this_op(walk_state, *op); + if (ACPI_FAILURE(status2)) { + return_ACPI_STATUS(status2); + } + + acpi_ut_delete_generic_state + (acpi_ut_pop_generic_state + (&walk_state->control_state)); + } + + acpi_ps_pop_scope(&(walk_state->parser_state), op, + &walk_state->arg_types, + &walk_state->arg_count); + + } while (*op); + + return_ACPI_STATUS(AE_OK); + + default: /* All other non-AE_OK status */ + + do { + if (*op) { + status2 = + acpi_ps_complete_this_op(walk_state, *op); + if (ACPI_FAILURE(status2)) { + return_ACPI_STATUS(status2); + } + } + + acpi_ps_pop_scope(&(walk_state->parser_state), op, + &walk_state->arg_types, + &walk_state->arg_count); + + } while (*op); + +#if 0 + /* + * TBD: Cleanup parse ops on error + */ + if (*op == NULL) { + acpi_ps_pop_scope(parser_state, op, + &walk_state->arg_types, + &walk_state->arg_count); + } +#endif + walk_state->prev_op = NULL; + walk_state->prev_arg_types = walk_state->arg_types; + return_ACPI_STATUS(status); + } + + /* This scope complete? */ + + if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) { + acpi_ps_pop_scope(&(walk_state->parser_state), op, + &walk_state->arg_types, + &walk_state->arg_count); + ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op)); + } else { + *op = NULL; + } + + ACPI_PREEMPTION_POINT(); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ps_complete_final_op + * + * PARAMETERS: walk_state - Current state + * Op - Current Op + * Status - Current parse status before complete last + * Op + * + * RETURN: Status + * + * DESCRIPTION: Complete last Op. + * + ******************************************************************************/ + +static acpi_status +acpi_ps_complete_final_op(struct acpi_walk_state *walk_state, + union acpi_parse_object *op, acpi_status status) +{ + acpi_status status2; + + ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state); + + /* + * Complete the last Op (if not completed), and clear the scope stack. + * It is easily possible to end an AML "package" with an unbounded number + * of open scopes (such as when several ASL blocks are closed with + * sequential closing braces). We want to terminate each one cleanly. + */ + ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n", + op)); + do { + if (op) { + if (walk_state->ascending_callback != NULL) { + walk_state->op = op; + walk_state->op_info = + acpi_ps_get_opcode_info(op->common. + aml_opcode); + walk_state->opcode = op->common.aml_opcode; + + status = + walk_state->ascending_callback(walk_state); + status = + acpi_ps_next_parse_state(walk_state, op, + status); + if (status == AE_CTRL_PENDING) { + status = + acpi_ps_complete_op(walk_state, &op, + AE_OK); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + if (status == AE_CTRL_TERMINATE) { + status = AE_OK; + + /* Clean up */ + do { + if (op) { + status2 = + acpi_ps_complete_this_op + (walk_state, op); + if (ACPI_FAILURE + (status2)) { + return_ACPI_STATUS + (status2); + } + } + + acpi_ps_pop_scope(& + (walk_state-> + parser_state), + &op, + &walk_state-> + arg_types, + &walk_state-> + arg_count); + + } while (op); + + return_ACPI_STATUS(status); + } + + else if (ACPI_FAILURE(status)) { + + /* First error is most important */ + + (void) + acpi_ps_complete_this_op(walk_state, + op); + return_ACPI_STATUS(status); + } + } + + status2 = acpi_ps_complete_this_op(walk_state, op); + if (ACPI_FAILURE(status2)) { + return_ACPI_STATUS(status2); + } + } + + acpi_ps_pop_scope(&(walk_state->parser_state), &op, + &walk_state->arg_types, + &walk_state->arg_count); + + } while (op); + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ps_parse_loop + * + * PARAMETERS: walk_state - Current state + * + * RETURN: Status + * + * DESCRIPTION: Parse AML (pointed to by the current parser state) and return + * a tree of ops. + * + ******************************************************************************/ + +acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state) +{ + acpi_status status = AE_OK; + union acpi_parse_object *op = NULL; /* current op */ + struct acpi_parse_state *parser_state; + u8 *aml_op_start = NULL; + + ACPI_FUNCTION_TRACE_PTR(ps_parse_loop, walk_state); + + if (walk_state->descending_callback == NULL) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + parser_state = &walk_state->parser_state; + walk_state->arg_types = 0; + +#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY)) + + if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) { + + /* We are restarting a preempted control method */ + + if (acpi_ps_has_completed_scope(parser_state)) { + /* + * We must check if a predicate to an IF or WHILE statement + * was just completed + */ + if ((parser_state->scope->parse_scope.op) && + ((parser_state->scope->parse_scope.op->common. + aml_opcode == AML_IF_OP) + || (parser_state->scope->parse_scope.op->common. + aml_opcode == AML_WHILE_OP)) + && (walk_state->control_state) + && (walk_state->control_state->common.state == + ACPI_CONTROL_PREDICATE_EXECUTING)) { + /* + * A predicate was just completed, get the value of the + * predicate and branch based on that value + */ + walk_state->op = NULL; + status = + acpi_ds_get_predicate_value(walk_state, + ACPI_TO_POINTER + (TRUE)); + if (ACPI_FAILURE(status) + && ((status & AE_CODE_MASK) != + AE_CODE_CONTROL)) { + if (status == AE_AML_NO_RETURN_VALUE) { + ACPI_EXCEPTION((AE_INFO, status, + "Invoked method did not return a value")); + + } + + ACPI_EXCEPTION((AE_INFO, status, + "GetPredicate Failed")); + return_ACPI_STATUS(status); + } + + status = + acpi_ps_next_parse_state(walk_state, op, + status); + } + + acpi_ps_pop_scope(parser_state, &op, + &walk_state->arg_types, + &walk_state->arg_count); + ACPI_DEBUG_PRINT((ACPI_DB_PARSE, + "Popped scope, Op=%p\n", op)); + } else if (walk_state->prev_op) { + + /* We were in the middle of an op */ + + op = walk_state->prev_op; + walk_state->arg_types = walk_state->prev_arg_types; + } + } +#endif + + /* Iterative parsing loop, while there is more AML to process: */ + + while ((parser_state->aml < parser_state->aml_end) || (op)) { + aml_op_start = parser_state->aml; + if (!op) { + status = + acpi_ps_create_op(walk_state, aml_op_start, &op); + if (ACPI_FAILURE(status)) { + if (status == AE_CTRL_PARSE_CONTINUE) { + continue; + } + + if (status == AE_CTRL_PARSE_PENDING) { + status = AE_OK; + } + + status = + acpi_ps_complete_op(walk_state, &op, + status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + continue; + } + + op->common.aml_offset = walk_state->aml_offset; + + if (walk_state->op_info) { + ACPI_DEBUG_PRINT((ACPI_DB_PARSE, + "Opcode %4.4X [%s] Op %p Aml %p AmlOffset %5.5X\n", + (u32) op->common.aml_opcode, + walk_state->op_info->name, op, + parser_state->aml, + op->common.aml_offset)); + } + } + + /* + * Start arg_count at zero because we don't know if there are + * any args yet + */ + walk_state->arg_count = 0; + + /* Are there any arguments that must be processed? */ + + if (walk_state->arg_types) { + + /* Get arguments */ + + status = + acpi_ps_get_arguments(walk_state, aml_op_start, op); + if (ACPI_FAILURE(status)) { + status = + acpi_ps_complete_op(walk_state, &op, + status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + continue; + } + } + + /* Check for arguments that need to be processed */ + + if (walk_state->arg_count) { + /* + * There are arguments (complex ones), push Op and + * prepare for argument + */ + status = acpi_ps_push_scope(parser_state, op, + walk_state->arg_types, + walk_state->arg_count); + if (ACPI_FAILURE(status)) { + status = + acpi_ps_complete_op(walk_state, &op, + status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + continue; + } + + op = NULL; + continue; + } + + /* + * All arguments have been processed -- Op is complete, + * prepare for next + */ + walk_state->op_info = + acpi_ps_get_opcode_info(op->common.aml_opcode); + if (walk_state->op_info->flags & AML_NAMED) { + if (acpi_gbl_depth) { + acpi_gbl_depth--; + } + + if (op->common.aml_opcode == AML_REGION_OP || + op->common.aml_opcode == AML_DATA_REGION_OP) { + /* + * Skip parsing of control method or opregion body, + * because we don't have enough info in the first pass + * to parse them correctly. + * + * Completed parsing an op_region declaration, we now + * know the length. + */ + op->named.length = + (u32) (parser_state->aml - op->named.data); + } + } + + if (walk_state->op_info->flags & AML_CREATE) { + /* + * Backup to beginning of create_xXXfield declaration (1 for + * Opcode) + * + * body_length is unknown until we parse the body + */ + op->named.length = + (u32) (parser_state->aml - op->named.data); + } + + if (op->common.aml_opcode == AML_BANK_FIELD_OP) { + /* + * Backup to beginning of bank_field declaration + * + * body_length is unknown until we parse the body + */ + op->named.length = + (u32) (parser_state->aml - op->named.data); + } + + /* This op complete, notify the dispatcher */ + + if (walk_state->ascending_callback != NULL) { + walk_state->op = op; + walk_state->opcode = op->common.aml_opcode; + + status = walk_state->ascending_callback(walk_state); + status = + acpi_ps_next_parse_state(walk_state, op, status); + if (status == AE_CTRL_PENDING) { + status = AE_OK; + } + } + + status = acpi_ps_complete_op(walk_state, &op, status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } /* while parser_state->Aml */ + + status = acpi_ps_complete_final_op(walk_state, op, status); + return_ACPI_STATUS(status); +} |