diff options
Diffstat (limited to 'drivers/acpi')
42 files changed, 915 insertions, 378 deletions
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index cb648a49543a..edeb2d1d99be 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -43,6 +43,7 @@ acpi-y += pci_root.o pci_link.o pci_irq.o acpi-y += acpi_lpss.o acpi_apd.o acpi-y += acpi_platform.o acpi-y += acpi_pnp.o +acpi-$(CONFIG_ARM_AMBA) += acpi_amba.o acpi-y += int340x_thermal.o acpi-y += power.o acpi-y += event.o diff --git a/drivers/acpi/acpi_amba.c b/drivers/acpi/acpi_amba.c new file mode 100644 index 000000000000..2a61b54ab968 --- /dev/null +++ b/drivers/acpi/acpi_amba.c @@ -0,0 +1,122 @@ + +/* + * ACPI support for platform bus type. + * + * Copyright (C) 2015, Linaro Ltd + * Author: Graeme Gregory <graeme.gregory@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/amba/bus.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "internal.h" + +static const struct acpi_device_id amba_id_list[] = { + {"ARMH0061", 0}, /* PL061 GPIO Device */ + {"", 0}, +}; + +static void amba_register_dummy_clk(void) +{ + static struct clk *amba_dummy_clk; + + /* If clock already registered */ + if (amba_dummy_clk) + return; + + amba_dummy_clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, + CLK_IS_ROOT, 0); + clk_register_clkdev(amba_dummy_clk, "apb_pclk", NULL); +} + +static int amba_handler_attach(struct acpi_device *adev, + const struct acpi_device_id *id) +{ + struct amba_device *dev; + struct resource_entry *rentry; + struct list_head resource_list; + bool address_found = false; + int irq_no = 0; + int ret; + + /* If the ACPI node already has a physical device attached, skip it. */ + if (adev->physical_node_count) + return 0; + + dev = amba_device_alloc(dev_name(&adev->dev), 0, 0); + if (!dev) { + dev_err(&adev->dev, "%s(): amba_device_alloc() failed\n", + __func__); + return -ENOMEM; + } + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret < 0) + goto err_free; + + list_for_each_entry(rentry, &resource_list, node) { + switch (resource_type(rentry->res)) { + case IORESOURCE_MEM: + if (!address_found) { + dev->res = *rentry->res; + address_found = true; + } + break; + case IORESOURCE_IRQ: + if (irq_no < AMBA_NR_IRQS) + dev->irq[irq_no++] = rentry->res->start; + break; + default: + dev_warn(&adev->dev, "Invalid resource\n"); + break; + } + } + + acpi_dev_free_resource_list(&resource_list); + + /* + * If the ACPI node has a parent and that parent has a physical device + * attached to it, that physical device should be the parent of + * the amba device we are about to create. + */ + if (adev->parent) + dev->dev.parent = acpi_get_first_physical_node(adev->parent); + + ACPI_COMPANION_SET(&dev->dev, adev); + + ret = amba_device_add(dev, &iomem_resource); + if (ret) { + dev_err(&adev->dev, "%s(): amba_device_add() failed (%d)\n", + __func__, ret); + goto err_free; + } + + return 1; + +err_free: + amba_device_put(dev); + return ret; +} + +static struct acpi_scan_handler amba_handler = { + .ids = amba_id_list, + .attach = amba_handler_attach, +}; + +void __init acpi_amba_init(void) +{ + amba_register_dummy_clk(); + acpi_scan_add_handler(&amba_handler); +} diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index d507cf6deda0..d0aad06b3872 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -143,6 +143,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = { /* Generic apd devices */ #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE { "AMD0010", APD_ADDR(cz_i2c_desc) }, + { "AMDI0010", APD_ADDR(cz_i2c_desc) }, { "AMD0020", APD_ADDR(cz_uart_desc) }, { "AMD0030", }, #endif diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index 296b7a14893a..c3af1088bf6b 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -43,7 +43,6 @@ static const struct acpi_device_id forbidden_id_list[] = { struct platform_device *acpi_create_platform_device(struct acpi_device *adev) { struct platform_device *pdev = NULL; - struct acpi_device *acpi_parent; struct platform_device_info pdevinfo; struct resource_entry *rentry; struct list_head resource_list; @@ -82,22 +81,8 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev) * attached to it, that physical device should be the parent of the * platform device we are about to create. */ - pdevinfo.parent = NULL; - acpi_parent = adev->parent; - if (acpi_parent) { - struct acpi_device_physical_node *entry; - struct list_head *list; - - mutex_lock(&acpi_parent->physical_node_lock); - list = &acpi_parent->physical_node_list; - if (!list_empty(list)) { - entry = list_first_entry(list, - struct acpi_device_physical_node, - node); - pdevinfo.parent = entry->dev; - } - mutex_unlock(&acpi_parent->physical_node_lock); - } + pdevinfo.parent = adev->parent ? + acpi_get_first_physical_node(adev->parent) : NULL; pdevinfo.name = dev_name(&adev->dev); pdevinfo.id = -1; pdevinfo.res = resources; diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 6979186dbd4b..b5e54f2da53d 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -514,7 +514,24 @@ static struct acpi_scan_handler processor_handler = { }, }; +static int acpi_processor_container_attach(struct acpi_device *dev, + const struct acpi_device_id *id) +{ + return 1; +} + +static const struct acpi_device_id processor_container_ids[] = { + { ACPI_PROCESSOR_CONTAINER_HID, }, + { } +}; + +static struct acpi_scan_handler processor_container_handler = { + .ids = processor_container_ids, + .attach = acpi_processor_container_attach, +}; + void __init acpi_processor_init(void) { acpi_scan_add_handler_with_hotplug(&processor_handler, "processor"); + acpi_scan_add_handler(&processor_container_handler); } diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 55c8197036f3..51b073b68f16 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -165,7 +165,7 @@ ACPI_GLOBAL(u8, acpi_gbl_next_owner_id_offset); /* Initialization sequencing */ -ACPI_INIT_GLOBAL(u8, acpi_gbl_reg_methods_enabled, FALSE); +ACPI_INIT_GLOBAL(u8, acpi_gbl_namespace_initialized, FALSE); /* Misc */ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index e4977fac9c1d..9562a10a1a18 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -85,7 +85,7 @@ union acpi_parse_object; #define ACPI_MTX_MEMORY 5 /* Debug memory tracking lists */ #define ACPI_MAX_MUTEX 5 -#define ACPI_NUM_MUTEX ACPI_MAX_MUTEX+1 +#define ACPI_NUM_MUTEX (ACPI_MAX_MUTEX+1) /* Lock structure for reader/writer interfaces */ @@ -103,11 +103,11 @@ struct acpi_rw_lock { #define ACPI_LOCK_HARDWARE 1 #define ACPI_MAX_LOCK 1 -#define ACPI_NUM_LOCK ACPI_MAX_LOCK+1 +#define ACPI_NUM_LOCK (ACPI_MAX_LOCK+1) /* This Thread ID means that the mutex is not in use (unlocked) */ -#define ACPI_MUTEX_NOT_ACQUIRED (acpi_thread_id) 0 +#define ACPI_MUTEX_NOT_ACQUIRED ((acpi_thread_id) 0) /* This Thread ID means an invalid thread ID */ diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index 9684ed61284d..022d69cb345a 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -88,7 +88,7 @@ */ acpi_status acpi_ns_initialize_objects(void); -acpi_status acpi_ns_initialize_devices(void); +acpi_status acpi_ns_initialize_devices(u32 flags); /* * nsload - Namespace loading diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index 52f6bee52d47..5faeab41e302 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -1125,7 +1125,7 @@ const union acpi_predefined_info acpi_gbl_resource_names[] = { PACKAGE_INFO(0, 0, 0, 0, 0, 0) /* Table terminator */ }; -static const union acpi_predefined_info acpi_gbl_scope_names[] = { +const union acpi_predefined_info acpi_gbl_scope_names[] = { {{"_GPE", 0, 0}}, {{"_PR_", 0, 0}}, {{"_SB_", 0, 0}}, diff --git a/drivers/acpi/acpica/dbcmds.c b/drivers/acpi/acpica/dbcmds.c index 7ec62c461280..772178c96ccf 100644 --- a/drivers/acpi/acpica/dbcmds.c +++ b/drivers/acpi/acpica/dbcmds.c @@ -348,7 +348,7 @@ void acpi_db_display_table_info(char *table_arg) } else { /* If the pointer is null, the table has been unloaded */ - ACPI_INFO((AE_INFO, "%4.4s - Table has been unloaded", + ACPI_INFO(("%4.4s - Table has been unloaded", table_desc->signature.ascii)); } } diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c index 9fee88f1c654..68f4e0f4b095 100644 --- a/drivers/acpi/acpica/dbconvert.c +++ b/drivers/acpi/acpica/dbconvert.c @@ -408,7 +408,7 @@ void acpi_db_dump_pld_buffer(union acpi_object *obj_desc) new_buffer = acpi_db_encode_pld_buffer(pld_info); if (!new_buffer) { - return; + goto exit; } /* The two bit-packed buffers should match */ @@ -479,6 +479,7 @@ void acpi_db_dump_pld_buffer(union acpi_object *obj_desc) pld_info->horizontal_offset); } - ACPI_FREE(pld_info); ACPI_FREE(new_buffer); +exit: + ACPI_FREE(pld_info); } diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index 6a72047aae1c..1982310e6d83 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -809,8 +809,7 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, if (method_desc->method. info_flags & ACPI_METHOD_SERIALIZED_PENDING) { if (walk_state) { - ACPI_INFO((AE_INFO, - "Marking method %4.4s as Serialized " + ACPI_INFO(("Marking method %4.4s as Serialized " "because of AE_ALREADY_EXISTS error", walk_state->method_node->name. ascii)); diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index c303e9d9266f..a91de2b4603c 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -524,8 +524,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state, arg = arg->common.next; } - ACPI_INFO((AE_INFO, - "Actual Package length (%u) is larger than " + ACPI_INFO(("Actual Package length (%u) is larger than " "NumElements field (%u), truncated", i, element_count)); } else if (i < element_count) { diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 9275e626ed8d..447fa1cac64f 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -499,8 +499,7 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, } if (gpe_enabled_count) { - ACPI_INFO((AE_INFO, - "Enabled %u GPEs in block %02X to %02X", + ACPI_INFO(("Enabled %u GPEs in block %02X to %02X", gpe_enabled_count, (u32)gpe_block->block_base_number, (u32)(gpe_block->block_base_number + (gpe_block->gpe_count - 1)))); diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index 9fdd8d09141b..7dc75474c897 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -281,7 +281,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id) } if (walk_info.count) { - ACPI_INFO((AE_INFO, "Enabled %u new GPEs", walk_info.count)); + ACPI_INFO(("Enabled %u new GPEs", walk_info.count)); } (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 47092b4d633c..63924d1c737a 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -600,7 +600,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) if (region_obj2->extra.method_REG == NULL || region_obj->region.handler == NULL || - !acpi_gbl_reg_methods_enabled) { + !acpi_gbl_namespace_initialized) { return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index 011df210b7b2..f74161301037 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -252,7 +252,7 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state, status = acpi_get_table_by_index(table_index, &table); if (ACPI_SUCCESS(status)) { - ACPI_INFO((AE_INFO, "Dynamic OEM Table Load:")); + ACPI_INFO(("Dynamic OEM Table Load:")); acpi_tb_print_table_header(0, table); } @@ -472,7 +472,7 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, /* Install the new table into the local data structures */ - ACPI_INFO((AE_INFO, "Dynamic OEM Table Load:")); + ACPI_INFO(("Dynamic OEM Table Load:")); (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); status = acpi_tb_install_standard_table(ACPI_PTR_TO_PHYSADDR(table), diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c index 28eb861c44eb..5aa21c4eda1d 100644 --- a/drivers/acpi/acpica/exoparg3.c +++ b/drivers/acpi/acpica/exoparg3.c @@ -123,8 +123,10 @@ acpi_status acpi_ex_opcode_3A_0T_0R(struct acpi_walk_state *walk_state) * op is intended for use by disassemblers in order to properly * disassemble control method invocations. The opcode or group of * opcodes should be surrounded by an "if (0)" clause to ensure that - * AML interpreters never see the opcode. + * AML interpreters never see the opcode. Thus, something is + * wrong if an external opcode ever gets here. */ + ACPI_ERROR((AE_INFO, "Executed External Op")); status = AE_OK; goto cleanup; diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index 65d58bea4320..5d59cfcef6f4 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -378,8 +378,7 @@ void acpi_ns_exec_module_code_list(void) acpi_ut_remove_reference(prev); } - ACPI_INFO((AE_INFO, - "Executed %u blocks of module-level executable AML code", + ACPI_INFO(("Executed %u blocks of module-level executable AML code", method_count)); ACPI_FREE(info); diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index bd75d46234a4..d4aa8b696ee9 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -46,6 +46,7 @@ #include "acnamesp.h" #include "acdispat.h" #include "acinterp.h" +#include "acevents.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsinit") @@ -83,6 +84,8 @@ acpi_status acpi_ns_initialize_objects(void) ACPI_FUNCTION_TRACE(ns_initialize_objects); + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Completing Initialization of ACPI Objects\n")); ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "**** Starting initialization of namespace objects ****\n")); ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, @@ -133,82 +136,108 @@ acpi_status acpi_ns_initialize_objects(void) * ******************************************************************************/ -acpi_status acpi_ns_initialize_devices(void) +acpi_status acpi_ns_initialize_devices(u32 flags) { - acpi_status status; + acpi_status status = AE_OK; struct acpi_device_walk_info info; ACPI_FUNCTION_TRACE(ns_initialize_devices); - /* Init counters */ + if (!(flags & ACPI_NO_DEVICE_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Initializing ACPI Devices\n")); - info.device_count = 0; - info.num_STA = 0; - info.num_INI = 0; + /* Init counters */ - ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, - "Initializing Device/Processor/Thermal objects " - "and executing _INI/_STA methods:\n")); + info.device_count = 0; + info.num_STA = 0; + info.num_INI = 0; - /* Tree analysis: find all subtrees that contain _INI methods */ + ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, + "Initializing Device/Processor/Thermal objects " + "and executing _INI/_STA methods:\n")); - status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, FALSE, - acpi_ns_find_ini_methods, NULL, &info, - NULL); - if (ACPI_FAILURE(status)) { - goto error_exit; - } + /* Tree analysis: find all subtrees that contain _INI methods */ + + status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, FALSE, + acpi_ns_find_ini_methods, NULL, + &info, NULL); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + /* Allocate the evaluation information block */ - /* Allocate the evaluation information block */ + info.evaluate_info = + ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); + if (!info.evaluate_info) { + status = AE_NO_MEMORY; + goto error_exit; + } - info.evaluate_info = - ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); - if (!info.evaluate_info) { - status = AE_NO_MEMORY; - goto error_exit; + /* + * Execute the "global" _INI method that may appear at the root. + * This support is provided for Windows compatibility (Vista+) and + * is not part of the ACPI specification. + */ + info.evaluate_info->prefix_node = acpi_gbl_root_node; + info.evaluate_info->relative_pathname = METHOD_NAME__INI; + info.evaluate_info->parameters = NULL; + info.evaluate_info->flags = ACPI_IGNORE_RETURN_VALUE; + + status = acpi_ns_evaluate(info.evaluate_info); + if (ACPI_SUCCESS(status)) { + info.num_INI++; + } } /* - * Execute the "global" _INI method that may appear at the root. This - * support is provided for Windows compatibility (Vista+) and is not - * part of the ACPI specification. + * Run all _REG methods + * + * Note: Any objects accessed by the _REG methods will be automatically + * initialized, even if they contain executable AML (see the call to + * acpi_ns_initialize_objects below). */ - info.evaluate_info->prefix_node = acpi_gbl_root_node; - info.evaluate_info->relative_pathname = METHOD_NAME__INI; - info.evaluate_info->parameters = NULL; - info.evaluate_info->flags = ACPI_IGNORE_RETURN_VALUE; + if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Executing _REG OpRegion methods\n")); - status = acpi_ns_evaluate(info.evaluate_info); - if (ACPI_SUCCESS(status)) { - info.num_INI++; + status = acpi_ev_initialize_op_regions(); + if (ACPI_FAILURE(status)) { + goto error_exit; + } } - /* Walk namespace to execute all _INIs on present devices */ + if (!(flags & ACPI_NO_DEVICE_INIT)) { - status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, FALSE, - acpi_ns_init_one_device, NULL, &info, - NULL); + /* Walk namespace to execute all _INIs on present devices */ - /* - * Any _OSI requests should be completed by now. If the BIOS has - * requested any Windows OSI strings, we will always truncate - * I/O addresses to 16 bits -- for Windows compatibility. - */ - if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) { - acpi_gbl_truncate_io_addresses = TRUE; - } + status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, FALSE, + acpi_ns_init_one_device, NULL, + &info, NULL); - ACPI_FREE(info.evaluate_info); - if (ACPI_FAILURE(status)) { - goto error_exit; - } + /* + * Any _OSI requests should be completed by now. If the BIOS has + * requested any Windows OSI strings, we will always truncate + * I/O addresses to 16 bits -- for Windows compatibility. + */ + if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) { + acpi_gbl_truncate_io_addresses = TRUE; + } - ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, - " Executed %u _INI methods requiring %u _STA executions " - "(examined %u objects)\n", - info.num_INI, info.num_STA, info.device_count)); + ACPI_FREE(info.evaluate_info); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, + " Executed %u _INI methods requiring %u _STA executions " + "(examined %u objects)\n", + info.num_INI, info.num_STA, + info.device_count)); + } return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 305218539df2..d48cbed342c1 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -269,8 +269,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state, */ if (ACPI_SUCCESS(status) && possible_method_call && (node->type == ACPI_TYPE_METHOD)) { - if (GET_CURRENT_ARG_TYPE(walk_state->arg_types) == - ARGP_SUPERNAME) { + if (walk_state->opcode == AML_UNLOAD_OP) { /* * acpi_ps_get_next_namestring has increased the AML pointer, * so we need to restore the saved AML pointer for method call. @@ -697,7 +696,7 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state * * PARAMETERS: walk_state - Current state * parser_state - Current parser state object - * arg_type - The parser argument type (ARGP_*) + * arg_type - The argument type (AML_*_ARG) * return_arg - Where the next arg is returned * * RETURN: Status, and an op object containing the next argument. @@ -817,9 +816,9 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, return_ACPI_STATUS(AE_NO_MEMORY); } - /* super_name allows argument to be a method call */ + /* To support super_name arg of Unload */ - if (arg_type == ARGP_SUPERNAME) { + if (walk_state->opcode == AML_UNLOAD_OP) { status = acpi_ps_get_next_namepath(walk_state, parser_state, arg, diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index b661a1e013fb..4dc6108de4ff 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -267,8 +267,7 @@ acpi_tb_install_standard_table(acpi_physical_address address, if (!reload && acpi_gbl_disable_ssdt_table_install && ACPI_COMPARE_NAME(&new_table_desc.signature, ACPI_SIG_SSDT)) { - ACPI_INFO((AE_INFO, - "Ignoring installation of %4.4s at %8.8X%8.8X", + ACPI_INFO(("Ignoring installation of %4.4s at %8.8X%8.8X", new_table_desc.signature.ascii, ACPI_FORMAT_UINT64(address))); goto release_and_exit; @@ -432,7 +431,7 @@ finish_override: return; } - ACPI_INFO((AE_INFO, "%4.4s 0x%8.8X%8.8X" + ACPI_INFO(("%4.4s 0x%8.8X%8.8X" " %s table override, new table: 0x%8.8X%8.8X", old_table_desc->signature.ascii, ACPI_FORMAT_UINT64(old_table_desc->address), diff --git a/drivers/acpi/acpica/tbprint.c b/drivers/acpi/acpica/tbprint.c index fd4146d4ff49..26d61dbace0a 100644 --- a/drivers/acpi/acpica/tbprint.c +++ b/drivers/acpi/acpica/tbprint.c @@ -132,7 +132,7 @@ acpi_tb_print_table_header(acpi_physical_address address, /* FACS only has signature and length fields */ - ACPI_INFO((AE_INFO, "%-4.4s 0x%8.8X%8.8X %06X", + ACPI_INFO(("%-4.4s 0x%8.8X%8.8X %06X", header->signature, ACPI_FORMAT_UINT64(address), header->length)); } else if (ACPI_VALIDATE_RSDP_SIG(header->signature)) { @@ -144,7 +144,7 @@ acpi_tb_print_table_header(acpi_physical_address address, ACPI_OEM_ID_SIZE); acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE); - ACPI_INFO((AE_INFO, "RSDP 0x%8.8X%8.8X %06X (v%.2d %-6.6s)", + ACPI_INFO(("RSDP 0x%8.8X%8.8X %06X (v%.2d %-6.6s)", ACPI_FORMAT_UINT64(address), (ACPI_CAST_PTR(struct acpi_table_rsdp, header)-> revision > @@ -158,8 +158,7 @@ acpi_tb_print_table_header(acpi_physical_address address, acpi_tb_cleanup_table_header(&local_header, header); - ACPI_INFO((AE_INFO, - "%-4.4s 0x%8.8X%8.8X" + ACPI_INFO(("%-4.4s 0x%8.8X%8.8X" " %06X (v%.2d %-6.6s %-8.8s %08X %-4.4s %08X)", local_header.signature, ACPI_FORMAT_UINT64(address), local_header.length, local_header.revision, diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 3269bef371d7..9240c76d2823 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -174,9 +174,7 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index) ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL, new_table); - ACPI_INFO((AE_INFO, - "Forced DSDT copy: length 0x%05X copied locally, original unmapped", - new_table->length)); + ACPI_INFO(("Forced DSDT copy: length 0x%05X copied locally, original unmapped", new_table->length)); return (new_table); } diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c index 278666e39563..3151968c10d1 100644 --- a/drivers/acpi/acpica/tbxfload.c +++ b/drivers/acpi/acpica/tbxfload.c @@ -47,6 +47,7 @@ #include "accommon.h" #include "acnamesp.h" #include "actables.h" +#include "acevents.h" #define _COMPONENT ACPI_TABLES ACPI_MODULE_NAME("tbxfload") @@ -68,6 +69,25 @@ acpi_status __init acpi_load_tables(void) ACPI_FUNCTION_TRACE(acpi_load_tables); + /* + * Install the default operation region handlers. These are the + * handlers that are defined by the ACPI specification to be + * "always accessible" -- namely, system_memory, system_IO, and + * PCI_Config. This also means that no _REG methods need to be + * run for these address spaces. We need to have these handlers + * installed before any AML code can be executed, especially any + * module-level code (11/2015). + * Note that we allow OSPMs to install their own region handlers + * between acpi_initialize_subsystem() and acpi_load_tables() to use + * their customized default region handlers. + */ + status = acpi_ev_install_region_handlers(); + if (ACPI_FAILURE(status) && status != AE_ALREADY_EXISTS) { + ACPI_EXCEPTION((AE_INFO, status, + "During Region initialization")); + return_ACPI_STATUS(status); + } + /* Load the namespace from the tables */ status = acpi_tb_load_namespace(); @@ -83,6 +103,20 @@ acpi_status __init acpi_load_tables(void) "While loading namespace from ACPI tables")); } + if (!acpi_gbl_group_module_level_code) { + /* + * Initialize the objects that remain uninitialized. This + * runs the executable AML that may be part of the + * declaration of these objects: + * operation_regions, buffer_fields, Buffers, and Packages. + */ + status = acpi_ns_initialize_objects(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + acpi_gbl_namespace_initialized = TRUE; return_ACPI_STATUS(status); } @@ -206,9 +240,7 @@ acpi_status acpi_tb_load_namespace(void) } if (!tables_failed) { - ACPI_INFO((AE_INFO, - "%u ACPI AML tables successfully acquired and loaded\n", - tables_loaded)); + ACPI_INFO(("%u ACPI AML tables successfully acquired and loaded\n", tables_loaded)); } else { ACPI_ERROR((AE_INFO, "%u table load failures, %u successful", @@ -301,7 +333,7 @@ acpi_status acpi_load_table(struct acpi_table_header *table) /* Install the table and load it into the namespace */ - ACPI_INFO((AE_INFO, "Host-directed Dynamic ACPI Table Load:")); + ACPI_INFO(("Host-directed Dynamic ACPI Table Load:")); (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); status = acpi_tb_install_standard_table(ACPI_PTR_TO_PHYSADDR(table), diff --git a/drivers/acpi/acpica/utcache.c b/drivers/acpi/acpica/utcache.c index c9a720f2274a..f8e9978888e1 100644 --- a/drivers/acpi/acpica/utcache.c +++ b/drivers/acpi/acpica/utcache.c @@ -245,7 +245,7 @@ void *acpi_os_acquire_object(struct acpi_memory_list *cache) acpi_status status; void *object; - ACPI_FUNCTION_NAME(os_acquire_object); + ACPI_FUNCTION_TRACE(os_acquire_object); if (!cache) { return_PTR(NULL); diff --git a/drivers/acpi/acpica/utnonansi.c b/drivers/acpi/acpica/utnonansi.c index c427a5cda465..d5c3adf19bd0 100644 --- a/drivers/acpi/acpica/utnonansi.c +++ b/drivers/acpi/acpica/utnonansi.c @@ -140,6 +140,67 @@ int acpi_ut_stricmp(char *string1, char *string2) return (c1 - c2); } +#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION) +/******************************************************************************* + * + * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat + * + * PARAMETERS: Adds a "DestSize" parameter to each of the standard string + * functions. This is the size of the Destination buffer. + * + * RETURN: TRUE if the operation would overflow the destination buffer. + * + * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that + * the result of the operation will not overflow the output string + * buffer. + * + * NOTE: These functions are typically only helpful for processing + * user input and command lines. For most ACPICA code, the + * required buffer length is precisely calculated before buffer + * allocation, so the use of these functions is unnecessary. + * + ******************************************************************************/ + +u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source) +{ + + if (strlen(source) >= dest_size) { + return (TRUE); + } + + strcpy(dest, source); + return (FALSE); +} + +u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source) +{ + + if ((strlen(dest) + strlen(source)) >= dest_size) { + return (TRUE); + } + + strcat(dest, source); + return (FALSE); +} + +u8 +acpi_ut_safe_strncat(char *dest, + acpi_size dest_size, + char *source, acpi_size max_transfer_length) +{ + acpi_size actual_transfer_length; + + actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source)); + + if ((strlen(dest) + actual_transfer_length) >= dest_size) { + return (TRUE); + } + + strncat(dest, source, max_transfer_length); + return (FALSE); +} +#endif + /******************************************************************************* * * FUNCTION: acpi_ut_strtoul64 @@ -155,7 +216,15 @@ int acpi_ut_stricmp(char *string1, char *string2) * 32-bit or 64-bit conversion, depending on the current mode * of the interpreter. * - * NOTE: Does not support Octal strings, not needed. + * NOTES: acpi_gbl_integer_byte_width should be set to the proper width. + * For the core ACPICA code, this width depends on the DSDT + * version. For iASL, the default byte width is always 8. + * + * Does not support Octal strings, not needed at this time. + * + * There is an earlier version of the function after this one, + * below. It is slightly different than this one, and the two + * may eventually may need to be merged. (01/2016). * ******************************************************************************/ @@ -171,7 +240,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer) u8 sign_of0x = 0; u8 term = 0; - ACPI_FUNCTION_TRACE_STR(ut_stroul64, string); + ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string); switch (base) { case ACPI_ANY_BASE: @@ -318,63 +387,162 @@ error_exit: } } -#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION) +#ifdef _OBSOLETE_FUNCTIONS +/* TBD: use version in ACPICA main code base? */ +/* DONE: 01/2016 */ + /******************************************************************************* * - * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat + * FUNCTION: strtoul64 * - * PARAMETERS: Adds a "DestSize" parameter to each of the standard string - * functions. This is the size of the Destination buffer. + * PARAMETERS: string - Null terminated string + * terminater - Where a pointer to the terminating byte + * is returned + * base - Radix of the string * - * RETURN: TRUE if the operation would overflow the destination buffer. + * RETURN: Converted value * - * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that - * the result of the operation will not overflow the output string - * buffer. - * - * NOTE: These functions are typically only helpful for processing - * user input and command lines. For most ACPICA code, the - * required buffer length is precisely calculated before buffer - * allocation, so the use of these functions is unnecessary. + * DESCRIPTION: Convert a string into an unsigned value. * ******************************************************************************/ -u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source) +acpi_status strtoul64(char *string, u32 base, u64 *ret_integer) { + u32 index; + u32 sign; + u64 return_value = 0; + acpi_status status = AE_OK; - if (strlen(source) >= dest_size) { - return (TRUE); + *ret_integer = 0; + + switch (base) { + case 0: + case 8: + case 10: + case 16: + + break; + + default: + /* + * The specified Base parameter is not in the domain of + * this function: + */ + return (AE_BAD_PARAMETER); } - strcpy(dest, source); - return (FALSE); -} + /* Skip over any white space in the buffer: */ -u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source) -{ + while (isspace((int)*string) || *string == '\t') { + ++string; + } - if ((strlen(dest) + strlen(source)) >= dest_size) { - return (TRUE); + /* + * The buffer may contain an optional plus or minus sign. + * If it does, then skip over it but remember what is was: + */ + if (*string == '-') { + sign = ACPI_SIGN_NEGATIVE; + ++string; + } else if (*string == '+') { + ++string; + sign = ACPI_SIGN_POSITIVE; + } else { + sign = ACPI_SIGN_POSITIVE; } - strcat(dest, source); - return (FALSE); -} + /* + * If the input parameter Base is zero, then we need to + * determine if it is octal, decimal, or hexadecimal: + */ + if (base == 0) { + if (*string == '0') { + if (tolower((int)*(++string)) == 'x') { + base = 16; + ++string; + } else { + base = 8; + } + } else { + base = 10; + } + } -u8 -acpi_ut_safe_strncat(char *dest, - acpi_size dest_size, - char *source, acpi_size max_transfer_length) -{ - acpi_size actual_transfer_length; + /* + * For octal and hexadecimal bases, skip over the leading + * 0 or 0x, if they are present. + */ + if (base == 8 && *string == '0') { + string++; + } - actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source)); + if (base == 16 && *string == '0' && tolower((int)*(++string)) == 'x') { + string++; + } - if ((strlen(dest) + actual_transfer_length) >= dest_size) { - return (TRUE); + /* Main loop: convert the string to an unsigned long */ + + while (*string) { + if (isdigit((int)*string)) { + index = ((u8)*string) - '0'; + } else { + index = (u8)toupper((int)*string); + if (isupper((int)index)) { + index = index - 'A' + 10; + } else { + goto error_exit; + } + } + + if (index >= base) { + goto error_exit; + } + + /* Check to see if value is out of range: */ + + if (return_value > ((ACPI_UINT64_MAX - (u64)index) / (u64)base)) { + goto error_exit; + } else { + return_value *= base; + return_value += index; + } + + ++string; } - strncat(dest, source, max_transfer_length); - return (FALSE); + /* If a minus sign was present, then "the conversion is negated": */ + + if (sign == ACPI_SIGN_NEGATIVE) { + return_value = (ACPI_UINT32_MAX - return_value) + 1; + } + + *ret_integer = return_value; + return (status); + +error_exit: + switch (base) { + case 8: + + status = AE_BAD_OCTAL_CONSTANT; + break; + + case 10: + + status = AE_BAD_DECIMAL_CONSTANT; + break; + + case 16: + + status = AE_BAD_HEX_CONSTANT; + break; + + default: + + /* Base validated above */ + + break; + } + + return (status); } #endif diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c index c7c2bb8f3559..60c406a8efcb 100644 --- a/drivers/acpi/acpica/uttrack.c +++ b/drivers/acpi/acpica/uttrack.c @@ -712,7 +712,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) /* Print summary */ if (!num_outstanding) { - ACPI_INFO((AE_INFO, "No outstanding allocations")); + ACPI_INFO(("No outstanding allocations")); } else { ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations", num_outstanding, num_outstanding)); diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 6fe59597b599..d9f15cbcd8a0 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -175,8 +175,7 @@ ACPI_EXPORT_SYMBOL(acpi_warning) * TBD: module_name and line_number args are not needed, should be removed. * ******************************************************************************/ -void ACPI_INTERNAL_VAR_XFACE -acpi_info(const char *module_name, u32 line_number, const char *format, ...) +void ACPI_INTERNAL_VAR_XFACE acpi_info(const char *format, ...) { va_list arg_list; diff --git a/drivers/acpi/acpica/utxfinit.c b/drivers/acpi/acpica/utxfinit.c index 721b87cce908..75b5f27da267 100644 --- a/drivers/acpi/acpica/utxfinit.c +++ b/drivers/acpi/acpica/utxfinit.c @@ -154,21 +154,6 @@ acpi_status __init acpi_enable_subsystem(u32 flags) */ acpi_gbl_early_initialization = FALSE; - /* - * Install the default operation region handlers. These are the - * handlers that are defined by the ACPI specification to be - * "always accessible" -- namely, system_memory, system_IO, and - * PCI_Config. This also means that no _REG methods need to be - * run for these address spaces. We need to have these handlers - * installed before any AML code can be executed, especially any - * module-level code (11/2015). - */ - status = acpi_ev_install_region_handlers(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "During Region initialization")); - return_ACPI_STATUS(status); - } #if (!ACPI_REDUCED_HARDWARE) /* Enable ACPI mode */ @@ -260,23 +245,6 @@ acpi_status __init acpi_initialize_objects(u32 flags) ACPI_FUNCTION_TRACE(acpi_initialize_objects); - /* - * Run all _REG methods - * - * Note: Any objects accessed by the _REG methods will be automatically - * initialized, even if they contain executable AML (see the call to - * acpi_ns_initialize_objects below). - */ - acpi_gbl_reg_methods_enabled = TRUE; - if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Executing _REG OpRegion methods\n")); - - status = acpi_ev_initialize_op_regions(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } #ifdef ACPI_EXEC_APP /* * This call implements the "initialization file" option for acpi_exec. @@ -299,32 +267,27 @@ acpi_status __init acpi_initialize_objects(u32 flags) */ if (acpi_gbl_group_module_level_code) { acpi_ns_exec_module_code_list(); - } - - /* - * Initialize the objects that remain uninitialized. This runs the - * executable AML that may be part of the declaration of these objects: - * operation_regions, buffer_fields, Buffers, and Packages. - */ - if (!(flags & ACPI_NO_OBJECT_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Completing Initialization of ACPI Objects\n")); - status = acpi_ns_initialize_objects(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + /* + * Initialize the objects that remain uninitialized. This + * runs the executable AML that may be part of the + * declaration of these objects: + * operation_regions, buffer_fields, Buffers, and Packages. + */ + if (!(flags & ACPI_NO_OBJECT_INIT)) { + status = acpi_ns_initialize_objects(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } } } /* - * Initialize all device objects in the namespace. This runs the device - * _STA and _INI methods. + * Initialize all device/region objects in the namespace. This runs + * the device _STA and _INI methods and region _REG methods. */ - if (!(flags & ACPI_NO_DEVICE_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Initializing ACPI Devices\n")); - - status = acpi_ns_initialize_devices(); + if (!(flags & (ACPI_NO_DEVICE_INIT | ACPI_NO_ADDRESS_SPACE_INIT))) { + status = acpi_ns_initialize_devices(flags); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index a2c8d7adb6eb..da370e1d31f4 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -536,7 +536,8 @@ int apei_resources_request(struct apei_resources *resources, goto err_unmap_ioport; } - return 0; + goto arch_res_fini; + err_unmap_ioport: list_for_each_entry(res, &resources->ioport, list) { if (res == res_bak) @@ -551,7 +552,8 @@ err_unmap_iomem: release_mem_region(res->start, res->end - res->start); } arch_res_fini: - apei_resources_fini(&arch_res); + if (arch_apei_filter_addr) + apei_resources_fini(&arch_res); nvs_res_fini: apei_resources_fini(&nvs_resources); return rc; diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 6e6bc1059301..006c3894c6ea 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -1207,6 +1207,9 @@ static int __init erst_init(void) "Failed to allocate %lld bytes for persistent store error log.\n", erst_erange.size); + /* Cleanup ERST Resources */ + apei_resources_fini(&erst_resources); + return 0; err_release_erange: diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 891c42d1cd65..0e8567846f1a 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -479,24 +479,38 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device) Device Matching -------------------------------------------------------------------------- */ -static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev, - const struct device *dev) +/** + * acpi_get_first_physical_node - Get first physical node of an ACPI device + * @adev: ACPI device in question + * + * Return: First physical node of ACPI device @adev + */ +struct device *acpi_get_first_physical_node(struct acpi_device *adev) { struct mutex *physical_node_lock = &adev->physical_node_lock; + struct device *phys_dev; mutex_lock(physical_node_lock); if (list_empty(&adev->physical_node_list)) { - adev = NULL; + phys_dev = NULL; } else { const struct acpi_device_physical_node *node; node = list_first_entry(&adev->physical_node_list, struct acpi_device_physical_node, node); - if (node->dev != dev) - adev = NULL; + + phys_dev = node->dev; } mutex_unlock(physical_node_lock); - return adev; + return phys_dev; +} + +static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev, + const struct device *dev) +{ + const struct device *phys_dev = acpi_get_first_physical_node(adev); + + return phys_dev && phys_dev == dev ? adev : NULL; } /** diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 6730f965b379..8adac69dba3d 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -39,6 +39,7 @@ #include <linux/cpufreq.h> #include <linux/delay.h> +#include <linux/ktime.h> #include <acpi/cppc_acpi.h> /* @@ -63,58 +64,140 @@ static struct mbox_chan *pcc_channel; static void __iomem *pcc_comm_addr; static u64 comm_base_addr; static int pcc_subspace_idx = -1; -static u16 pcc_cmd_delay; static bool pcc_channel_acquired; +static ktime_t deadline; +static unsigned int pcc_mpar, pcc_mrtt; + +/* pcc mapped address + header size + offset within PCC subspace */ +#define GET_PCC_VADDR(offs) (pcc_comm_addr + 0x8 + (offs)) /* * Arbitrary Retries in case the remote processor is slow to respond - * to PCC commands. + * to PCC commands. Keeping it high enough to cover emulators where + * the processors run painfully slow. */ #define NUM_RETRIES 500 +static int check_pcc_chan(void) +{ + int ret = -EIO; + struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_comm_addr; + ktime_t next_deadline = ktime_add(ktime_get(), deadline); + + /* Retry in case the remote processor was too slow to catch up. */ + while (!ktime_after(ktime_get(), next_deadline)) { + /* + * Per spec, prior to boot the PCC space wil be initialized by + * platform and should have set the command completion bit when + * PCC can be used by OSPM + */ + if (readw_relaxed(&generic_comm_base->status) & PCC_CMD_COMPLETE) { + ret = 0; + break; + } + /* + * Reducing the bus traffic in case this loop takes longer than + * a few retries. + */ + udelay(3); + } + + return ret; +} + static int send_pcc_cmd(u16 cmd) { - int retries, result = -EIO; - struct acpi_pcct_hw_reduced *pcct_ss = pcc_channel->con_priv; + int ret = -EIO; struct acpi_pcct_shared_memory *generic_comm_base = (struct acpi_pcct_shared_memory *) pcc_comm_addr; - u32 cmd_latency = pcct_ss->latency; + static ktime_t last_cmd_cmpl_time, last_mpar_reset; + static int mpar_count; + unsigned int time_delta; - /* Min time OS should wait before sending next command. */ - udelay(pcc_cmd_delay); + /* + * For CMD_WRITE we know for a fact the caller should have checked + * the channel before writing to PCC space + */ + if (cmd == CMD_READ) { + ret = check_pcc_chan(); + if (ret) + return ret; + } + + /* + * Handle the Minimum Request Turnaround Time(MRTT) + * "The minimum amount of time that OSPM must wait after the completion + * of a command before issuing the next command, in microseconds" + */ + if (pcc_mrtt) { + time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time); + if (pcc_mrtt > time_delta) + udelay(pcc_mrtt - time_delta); + } + + /* + * Handle the non-zero Maximum Periodic Access Rate(MPAR) + * "The maximum number of periodic requests that the subspace channel can + * support, reported in commands per minute. 0 indicates no limitation." + * + * This parameter should be ideally zero or large enough so that it can + * handle maximum number of requests that all the cores in the system can + * collectively generate. If it is not, we will follow the spec and just + * not send the request to the platform after hitting the MPAR limit in + * any 60s window + */ + if (pcc_mpar) { + if (mpar_count == 0) { + time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset); + if (time_delta < 60 * MSEC_PER_SEC) { + pr_debug("PCC cmd not sent due to MPAR limit"); + return -EIO; + } + last_mpar_reset = ktime_get(); + mpar_count = pcc_mpar; + } + mpar_count--; + } /* Write to the shared comm region. */ - writew(cmd, &generic_comm_base->command); + writew_relaxed(cmd, &generic_comm_base->command); /* Flip CMD COMPLETE bit */ - writew(0, &generic_comm_base->status); + writew_relaxed(0, &generic_comm_base->status); /* Ring doorbell */ - result = mbox_send_message(pcc_channel, &cmd); - if (result < 0) { + ret = mbox_send_message(pcc_channel, &cmd); + if (ret < 0) { pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n", - cmd, result); - return result; + cmd, ret); + return ret; } - /* Wait for a nominal time to let platform process command. */ - udelay(cmd_latency); - - /* Retry in case the remote processor was too slow to catch up. */ - for (retries = NUM_RETRIES; retries > 0; retries--) { - if (readw_relaxed(&generic_comm_base->status) & PCC_CMD_COMPLETE) { - result = 0; - break; - } + /* + * For READs we need to ensure the cmd completed to ensure + * the ensuing read()s can proceed. For WRITEs we dont care + * because the actual write()s are done before coming here + * and the next READ or WRITE will check if the channel + * is busy/free at the entry of this call. + * + * If Minimum Request Turnaround Time is non-zero, we need + * to record the completion time of both READ and WRITE + * command for proper handling of MRTT, so we need to check + * for pcc_mrtt in addition to CMD_READ + */ + if (cmd == CMD_READ || pcc_mrtt) { + ret = check_pcc_chan(); + if (pcc_mrtt) + last_cmd_cmpl_time = ktime_get(); } - mbox_client_txdone(pcc_channel, result); - return result; + mbox_client_txdone(pcc_channel, ret); + return ret; } static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret) { - if (ret) + if (ret < 0) pr_debug("TX did not complete: CMD sent:%x, ret:%d\n", *(u16 *)msg, ret); else @@ -306,6 +389,7 @@ static int register_pcc_channel(int pcc_subspace_idx) { struct acpi_pcct_hw_reduced *cppc_ss; unsigned int len; + u64 usecs_lat; if (pcc_subspace_idx >= 0) { pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl, @@ -335,7 +419,16 @@ static int register_pcc_channel(int pcc_subspace_idx) */ comm_base_addr = cppc_ss->base_address; len = cppc_ss->length; - pcc_cmd_delay = cppc_ss->min_turnaround_time; + + /* + * cppc_ss->latency is just a Nominal value. In reality + * the remote processor could be much slower to reply. + * So add an arbitrary amount of wait on top of Nominal. + */ + usecs_lat = NUM_RETRIES * cppc_ss->latency; + deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC); + pcc_mrtt = cppc_ss->min_turnaround_time; + pcc_mpar = cppc_ss->max_access_rate; pcc_comm_addr = acpi_os_ioremap(comm_base_addr, len); if (!pcc_comm_addr) { @@ -546,29 +639,74 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr) } EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit); -static u64 get_phys_addr(struct cpc_reg *reg) -{ - /* PCC communication addr space begins at byte offset 0x8. */ - if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) - return (u64)comm_base_addr + 0x8 + reg->address; - else - return reg->address; -} +/* + * Since cpc_read and cpc_write are called while holding pcc_lock, it should be + * as fast as possible. We have already mapped the PCC subspace during init, so + * we can directly write to it. + */ -static void cpc_read(struct cpc_reg *reg, u64 *val) +static int cpc_read(struct cpc_reg *reg, u64 *val) { - u64 addr = get_phys_addr(reg); + int ret_val = 0; - acpi_os_read_memory((acpi_physical_address)addr, - val, reg->bit_width); + *val = 0; + if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { + void __iomem *vaddr = GET_PCC_VADDR(reg->address); + + switch (reg->bit_width) { + case 8: + *val = readb_relaxed(vaddr); + break; + case 16: + *val = readw_relaxed(vaddr); + break; + case 32: + *val = readl_relaxed(vaddr); + break; + case 64: + *val = readq_relaxed(vaddr); + break; + default: + pr_debug("Error: Cannot read %u bit width from PCC\n", + reg->bit_width); + ret_val = -EFAULT; + } + } else + ret_val = acpi_os_read_memory((acpi_physical_address)reg->address, + val, reg->bit_width); + return ret_val; } -static void cpc_write(struct cpc_reg *reg, u64 val) +static int cpc_write(struct cpc_reg *reg, u64 val) { - u64 addr = get_phys_addr(reg); + int ret_val = 0; - acpi_os_write_memory((acpi_physical_address)addr, - val, reg->bit_width); + if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { + void __iomem *vaddr = GET_PCC_VADDR(reg->address); + + switch (reg->bit_width) { + case 8: + writeb_relaxed(val, vaddr); + break; + case 16: + writew_relaxed(val, vaddr); + break; + case 32: + writel_relaxed(val, vaddr); + break; + case 64: + writeq_relaxed(val, vaddr); + break; + default: + pr_debug("Error: Cannot write %u bit width to PCC\n", + reg->bit_width); + ret_val = -EFAULT; + break; + } + } else + ret_val = acpi_os_write_memory((acpi_physical_address)reg->address, + val, reg->bit_width); + return ret_val; } /** @@ -604,7 +742,7 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps) (ref_perf->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) || (nom_perf->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM)) { /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ)) { + if (send_pcc_cmd(CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -662,7 +800,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) if ((delivered_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) || (reference_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM)) { /* Ring doorbell once to update PCC subspace */ - if (send_pcc_cmd(CMD_READ)) { + if (send_pcc_cmd(CMD_READ) < 0) { ret = -EIO; goto out_err; } @@ -713,6 +851,13 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) spin_lock(&pcc_lock); + /* If this is PCC reg, check if channel is free before writing */ + if (desired_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { + ret = check_pcc_chan(); + if (ret) + goto busy_channel; + } + /* * Skip writing MIN/MAX until Linux knows how to come up with * useful values. @@ -722,10 +867,10 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) /* Is this a PCC reg ?*/ if (desired_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) { /* Ring doorbell so Remote can get our perf request. */ - if (send_pcc_cmd(CMD_WRITE)) + if (send_pcc_cmd(CMD_WRITE) < 0) ret = -EIO; } - +busy_channel: spin_unlock(&pcc_lock); return ret; diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 1e6833a5cd44..a37508ef66c1 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -20,6 +20,7 @@ #define PREFIX "ACPI: " +void acpi_initrd_initialize_tables(void); acpi_status acpi_os_initialize1(void); void init_acpi_device_notify(void); int acpi_scan_init(void); @@ -29,6 +30,11 @@ void acpi_processor_init(void); void acpi_platform_init(void); void acpi_pnp_init(void); void acpi_int340x_thermal_init(void); +#ifdef CONFIG_ARM_AMBA +void acpi_amba_init(void); +#else +static inline void acpi_amba_init(void) {} +#endif int acpi_sysfs_init(void); void acpi_container_init(void); void acpi_memory_hotplug_init(void); @@ -106,6 +112,7 @@ bool acpi_device_is_present(struct acpi_device *adev); bool acpi_device_is_battery(struct acpi_device *adev); bool acpi_device_is_first_physical_node(struct acpi_device *adev, const struct device *dev); +struct device *acpi_get_first_physical_node(struct acpi_device *adev); /* -------------------------------------------------------------------------- Device Matching and Notification diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 67da6fb72274..814d5f83b75e 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -602,6 +602,14 @@ acpi_os_predefined_override(const struct acpi_predefined_names *init_val, return AE_OK; } +static void acpi_table_taint(struct acpi_table_header *table) +{ + pr_warn(PREFIX + "Override [%4.4s-%8.8s], this is unsafe: tainting kernel\n", + table->signature, table->oem_table_id); + add_taint(TAINT_OVERRIDDEN_ACPI_TABLE, LOCKDEP_NOW_UNRELIABLE); +} + #ifdef CONFIG_ACPI_INITRD_TABLE_OVERRIDE #include <linux/earlycpio.h> #include <linux/memblock.h> @@ -636,6 +644,7 @@ static const char * const table_sigs[] = { #define ACPI_OVERRIDE_TABLES 64 static struct cpio_data __initdata acpi_initrd_files[ACPI_OVERRIDE_TABLES]; +static DECLARE_BITMAP(acpi_initrd_installed, ACPI_OVERRIDE_TABLES); #define MAP_CHUNK_SIZE (NR_FIX_BTMAPS << PAGE_SHIFT) @@ -746,96 +755,125 @@ void __init acpi_initrd_override(void *data, size_t size) } } } -#endif /* CONFIG_ACPI_INITRD_TABLE_OVERRIDE */ -static void acpi_table_taint(struct acpi_table_header *table) +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address *address, u32 *length) { - pr_warn(PREFIX - "Override [%4.4s-%8.8s], this is unsafe: tainting kernel\n", - table->signature, table->oem_table_id); - add_taint(TAINT_OVERRIDDEN_ACPI_TABLE, LOCKDEP_NOW_UNRELIABLE); -} + int table_offset = 0; + int table_index = 0; + struct acpi_table_header *table; + u32 table_length; + *length = 0; + *address = 0; + if (!acpi_tables_addr) + return AE_OK; -acpi_status -acpi_os_table_override(struct acpi_table_header * existing_table, - struct acpi_table_header ** new_table) -{ - if (!existing_table || !new_table) - return AE_BAD_PARAMETER; + while (table_offset + ACPI_HEADER_SIZE <= all_tables_size) { + table = acpi_os_map_memory(acpi_tables_addr + table_offset, + ACPI_HEADER_SIZE); + if (table_offset + table->length > all_tables_size) { + acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); + WARN_ON(1); + return AE_OK; + } - *new_table = NULL; + table_length = table->length; -#ifdef CONFIG_ACPI_CUSTOM_DSDT - if (strncmp(existing_table->signature, "DSDT", 4) == 0) - *new_table = (struct acpi_table_header *)AmlCode; -#endif - if (*new_table != NULL) + /* Only override tables matched */ + if (test_bit(table_index, acpi_initrd_installed) || + memcmp(existing_table->signature, table->signature, 4) || + memcmp(table->oem_table_id, existing_table->oem_table_id, + ACPI_OEM_TABLE_ID_SIZE)) { + acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); + goto next_table; + } + + *length = table_length; + *address = acpi_tables_addr + table_offset; acpi_table_taint(existing_table); + acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); + set_bit(table_index, acpi_initrd_installed); + break; + +next_table: + table_offset += table_length; + table_index++; + } return AE_OK; } -acpi_status -acpi_os_physical_table_override(struct acpi_table_header *existing_table, - acpi_physical_address *address, - u32 *table_length) +void __init acpi_initrd_initialize_tables(void) { -#ifndef CONFIG_ACPI_INITRD_TABLE_OVERRIDE - *table_length = 0; - *address = 0; - return AE_OK; -#else int table_offset = 0; + int table_index = 0; + u32 table_length; struct acpi_table_header *table; - *table_length = 0; - *address = 0; - if (!acpi_tables_addr) - return AE_OK; - - do { - if (table_offset + ACPI_HEADER_SIZE > all_tables_size) { - WARN_ON(1); - return AE_OK; - } + return; + while (table_offset + ACPI_HEADER_SIZE <= all_tables_size) { table = acpi_os_map_memory(acpi_tables_addr + table_offset, ACPI_HEADER_SIZE); - if (table_offset + table->length > all_tables_size) { acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); WARN_ON(1); - return AE_OK; + return; } - table_offset += table->length; + table_length = table->length; - if (memcmp(existing_table->signature, table->signature, 4)) { - acpi_os_unmap_memory(table, - ACPI_HEADER_SIZE); - continue; - } - - /* Only override tables with matching oem id */ - if (memcmp(table->oem_table_id, existing_table->oem_table_id, - ACPI_OEM_TABLE_ID_SIZE)) { - acpi_os_unmap_memory(table, - ACPI_HEADER_SIZE); - continue; + /* Skip RSDT/XSDT which should only be used for override */ + if (test_bit(table_index, acpi_initrd_installed) || + ACPI_COMPARE_NAME(table->signature, ACPI_SIG_RSDT) || + ACPI_COMPARE_NAME(table->signature, ACPI_SIG_XSDT)) { + acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); + goto next_table; } - table_offset -= table->length; - *table_length = table->length; + acpi_table_taint(table); acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); - *address = acpi_tables_addr + table_offset; - break; - } while (table_offset + ACPI_HEADER_SIZE < all_tables_size); + acpi_install_table(acpi_tables_addr + table_offset, TRUE); + set_bit(table_index, acpi_initrd_installed); +next_table: + table_offset += table_length; + table_index++; + } +} +#else +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address *address, + u32 *table_length) +{ + *table_length = 0; + *address = 0; + return AE_OK; +} + +void __init acpi_initrd_initialize_tables(void) +{ +} +#endif /* CONFIG_ACPI_INITRD_TABLE_OVERRIDE */ - if (*address != 0) +acpi_status +acpi_os_table_override(struct acpi_table_header *existing_table, + struct acpi_table_header **new_table) +{ + if (!existing_table || !new_table) + return AE_BAD_PARAMETER; + + *new_table = NULL; + +#ifdef CONFIG_ACPI_CUSTOM_DSDT + if (strncmp(existing_table->signature, "DSDT", 4) == 0) + *new_table = (struct acpi_table_header *)AmlCode; +#endif + if (*new_table != NULL) acpi_table_taint(existing_table); return AE_OK; -#endif } static irqreturn_t acpi_irq(int irq, void *dev_id) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index c8e169e46673..2c45dd3acc17 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/acpi.h> #include <linux/slab.h> +#include <linux/interrupt.h> #define PREFIX "ACPI: " @@ -387,6 +388,23 @@ static inline int acpi_isa_register_gsi(struct pci_dev *dev) } #endif +static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin) +{ +#ifdef CONFIG_X86 + /* + * On x86 irq line 0xff means "unknown" or "no connection" + * (PCI 3.0, Section 6.2.4, footnote on page 223). + */ + if (dev->irq == 0xff) { + dev->irq = IRQ_NOTCONNECTED; + dev_warn(&dev->dev, "PCI INT %c: not connected\n", + pin_name(pin)); + return false; + } +#endif + return true; +} + int acpi_pci_irq_enable(struct pci_dev *dev) { struct acpi_prt_entry *entry; @@ -431,11 +449,14 @@ int acpi_pci_irq_enable(struct pci_dev *dev) } else gsi = -1; - /* - * No IRQ known to the ACPI subsystem - maybe the BIOS / - * driver reported one, then use it. Exit in any case. - */ if (gsi < 0) { + /* + * No IRQ known to the ACPI subsystem - maybe the BIOS / + * driver reported one, then use it. Exit in any case. + */ + if (!acpi_pci_irq_valid(dev, pin)) + return 0; + if (acpi_isa_register_gsi(dev)) dev_warn(&dev->dev, "PCI INT %c: no GSI\n", pin_name(pin)); diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 11154a330f07..d2fa8cb82d2b 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -314,7 +314,6 @@ static int __init acpi_processor_driver_init(void) if (result < 0) return result; - acpi_processor_syscore_init(); register_hotcpu_notifier(&acpi_cpu_notifier); acpi_thermal_cpufreq_init(); acpi_processor_ppc_init(); @@ -330,7 +329,6 @@ static void __exit acpi_processor_driver_exit(void) acpi_processor_ppc_exit(); acpi_thermal_cpufreq_exit(); unregister_hotcpu_notifier(&acpi_cpu_notifier); - acpi_processor_syscore_exit(); driver_unregister(&acpi_processor_driver); } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 175c86bee3a9..fadce354d2b7 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -23,6 +23,7 @@ * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) "ACPI: " fmt #include <linux/module.h> #include <linux/acpi.h> @@ -30,7 +31,6 @@ #include <linux/sched.h> /* need_resched() */ #include <linux/tick.h> #include <linux/cpuidle.h> -#include <linux/syscore_ops.h> #include <acpi/processor.h> /* @@ -43,8 +43,6 @@ #include <asm/apic.h> #endif -#define PREFIX "ACPI: " - #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); @@ -81,9 +79,9 @@ static int set_max_cstate(const struct dmi_system_id *id) if (max_cstate > ACPI_PROCESSOR_MAX_POWER) return 0; - printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate." - " Override with \"processor.max_cstate=%d\"\n", id->ident, - (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); + pr_notice("%s detected - limiting to C%ld max_cstate." + " Override with \"processor.max_cstate=%d\"\n", id->ident, + (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); max_cstate = (long)id->driver_data; @@ -194,42 +192,6 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #endif -#ifdef CONFIG_PM_SLEEP -static u32 saved_bm_rld; - -static int acpi_processor_suspend(void) -{ - acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); - return 0; -} - -static void acpi_processor_resume(void) -{ - u32 resumed_bm_rld = 0; - - acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); - if (resumed_bm_rld == saved_bm_rld) - return; - - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); -} - -static struct syscore_ops acpi_processor_syscore_ops = { - .suspend = acpi_processor_suspend, - .resume = acpi_processor_resume, -}; - -void acpi_processor_syscore_init(void) -{ - register_syscore_ops(&acpi_processor_syscore_ops); -} - -void acpi_processor_syscore_exit(void) -{ - unregister_syscore_ops(&acpi_processor_syscore_ops); -} -#endif /* CONFIG_PM_SLEEP */ - #if defined(CONFIG_X86) static void tsc_check_state(int state) { @@ -351,7 +313,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) /* There must be at least 2 elements */ if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) { - printk(KERN_ERR PREFIX "not enough elements in _CST\n"); + pr_err("not enough elements in _CST\n"); ret = -EFAULT; goto end; } @@ -360,7 +322,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) /* Validate number of power states. */ if (count < 1 || count != cst->package.count - 1) { - printk(KERN_ERR PREFIX "count given by _CST is not valid\n"); + pr_err("count given by _CST is not valid\n"); ret = -EFAULT; goto end; } @@ -469,11 +431,9 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1) */ if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) { - printk(KERN_WARNING - "Limiting number of power states to max (%d)\n", - ACPI_PROCESSOR_MAX_POWER); - printk(KERN_WARNING - "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); + pr_warn("Limiting number of power states to max (%d)\n", + ACPI_PROCESSOR_MAX_POWER); + pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); break; } } @@ -1097,8 +1057,8 @@ int acpi_processor_power_init(struct acpi_processor *pr) retval = cpuidle_register_driver(&acpi_idle_driver); if (retval) return retval; - printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", - acpi_idle_driver.name); + pr_debug("%s registered with cpuidle\n", + acpi_idle_driver.name); } dev = kzalloc(sizeof(*dev), GFP_KERNEL); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 407a3760e8de..5f28cf778349 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1930,6 +1930,7 @@ int __init acpi_scan_init(void) acpi_memory_hotplug_init(); acpi_pnp_init(); acpi_int340x_thermal_init(); + acpi_amba_init(); acpi_scan_add_handler(&generic_device_handler); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 9cb975200cac..fbfcce3b5227 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -19,6 +19,7 @@ #include <linux/reboot.h> #include <linux/acpi.h> #include <linux/module.h> +#include <linux/syscore_ops.h> #include <asm/io.h> #include <trace/events/power.h> @@ -677,6 +678,39 @@ static void acpi_sleep_suspend_setup(void) static inline void acpi_sleep_suspend_setup(void) {} #endif /* !CONFIG_SUSPEND */ +#ifdef CONFIG_PM_SLEEP +static u32 saved_bm_rld; + +static int acpi_save_bm_rld(void) +{ + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); + return 0; +} + +static void acpi_restore_bm_rld(void) +{ + u32 resumed_bm_rld = 0; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + if (resumed_bm_rld == saved_bm_rld) + return; + + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); +} + +static struct syscore_ops acpi_sleep_syscore_ops = { + .suspend = acpi_save_bm_rld, + .resume = acpi_restore_bm_rld, +}; + +void acpi_sleep_syscore_init(void) +{ + register_syscore_ops(&acpi_sleep_syscore_ops); +} +#else +static inline void acpi_sleep_syscore_init(void) {} +#endif /* CONFIG_PM_SLEEP */ + #ifdef CONFIG_HIBERNATION static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; @@ -839,6 +873,7 @@ int __init acpi_sleep_init(void) sleep_states[ACPI_STATE_S0] = 1; + acpi_sleep_syscore_init(); acpi_sleep_suspend_setup(); acpi_sleep_hibernate_setup(); diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 6c0f0794aa82..57c0a4525dba 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -32,6 +32,7 @@ #include <linux/errno.h> #include <linux/acpi.h> #include <linux/bootmem.h> +#include "internal.h" #define ACPI_MAX_TABLES 128 @@ -456,6 +457,7 @@ int __init acpi_table_init(void) status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); if (ACPI_FAILURE(status)) return -EINVAL; + acpi_initrd_initialize_tables(); check_multiple_madt(); return 0; |