diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 22 |
1 files changed, 13 insertions, 9 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 55e257c268dd..6f33ace33daf 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -884,7 +884,7 @@ unsigned long ata_pack_xfermask(unsigned long pio_mask, * @udma_mask: resulting udma_mask * * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. - * Any NULL distination masks will be ignored. + * Any NULL destination masks will be ignored. */ void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, unsigned long *mwdma_mask, unsigned long *udma_mask) @@ -3399,7 +3399,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) * EH context. * * RETURNS: - * 0 if @linke is ready before @deadline; otherwise, -errno. + * 0 if @link is ready before @deadline; otherwise, -errno. */ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) @@ -3480,7 +3480,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, * EH context. * * RETURNS: - * 0 if @linke is ready before @deadline; otherwise, -errno. + * 0 if @link is ready before @deadline; otherwise, -errno. */ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) @@ -3493,7 +3493,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, /** * sata_link_debounce - debounce SATA phy status * @link: ATA link to debounce SATA phy status for - * @params: timing parameters { interval, duratinon, timeout } in msec + * @params: timing parameters { interval, duration, timeout } in msec * @deadline: deadline jiffies for the operation * * Make sure SStatus of @link reaches stable state, determined by @@ -3563,7 +3563,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, /** * sata_link_resume - resume SATA link * @link: ATA link to resume SATA - * @params: timing parameters { interval, duratinon, timeout } in msec + * @params: timing parameters { interval, duration, timeout } in msec * @deadline: deadline jiffies for the operation * * Resume SATA phy @link and debounce it. @@ -3746,7 +3746,7 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline) /** * sata_link_hardreset - reset link via SATA phy reset * @link: link to reset - * @timing: timing parameters { interval, duratinon, timeout } in msec + * @timing: timing parameters { interval, duration, timeout } in msec * @deadline: deadline jiffies for the operation * @online: optional out parameter indicating link onlineness * @check_ready: optional callback to check link readiness @@ -4528,6 +4528,7 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) { struct ata_taskfile tf; unsigned int err_mask; + unsigned long timeout = 0; /* set up set-features taskfile */ DPRINTK("set features - SATA features\n"); @@ -4539,7 +4540,10 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) tf.protocol = ATA_PROT_NODATA; tf.nsect = feature; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (enable == SETFEATURES_SPINUP) + timeout = ata_probe_timeout ? + ata_probe_timeout * 1000 : SETFEATURES_SPINUP_TIMEOUT; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -6208,7 +6212,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) * * After allocating an ATA host and initializing it, most libata * LLDs perform three steps to activate the host - start host, - * request IRQ and register it. This helper takes necessasry + * request IRQ and register it. This helper takes necessary * arguments and performs the three steps in one go. * * An invalid IRQ skips the IRQ registration and expects the host to @@ -6261,7 +6265,7 @@ int ata_host_activate(struct ata_host *host, int irq, } /** - * ata_port_detach - Detach ATA port in prepration of device removal + * ata_port_detach - Detach ATA port in preparation of device removal * @ap: ATA port to be detached * * Detach all ATA devices and the associated SCSI devices of @ap; |