27 files changed, 92 insertions, 43 deletions
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index ed6a30cd681a..940ddbc59aa7 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -25,7 +25,7 @@
  *
  *
  * libata documentation is available via 'make {ps|pdf}docs',
- * as Documentation/DocBook/libata.*
+ * as Documentation/driver-api/libata.rst
  *
  * AHCI hardware documentation:
  * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 2fc52407306c..1e1c355121e4 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -24,7 +24,7 @@
  *
  *
  * libata documentation is available via 'make {ps|pdf}docs',
- * as Documentation/DocBook/libata.*
+ * as Documentation/driver-api/libata.rst
  *
  * AHCI hardware documentation:
  * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
@@ -1364,6 +1364,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 {}
 #endif
 
+/*
+ * On the Acer Aspire Switch Alpha 12, sometimes all SATA ports are detected
+ * as DUMMY, or detected but eventually get a "link down" and never get up
+ * again. When this happens, CAP.NP may hold a value of 0x00 or 0x01, and the
+ * port_map may hold a value of 0x00.
+ *
+ * Overriding CAP.NP to 0x02 and the port_map to 0x7 will reveal all 3 ports
+ * and can significantly reduce the occurrence of the problem.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=189471
+ */
+static void acer_sa5_271_workaround(struct ahci_host_priv *hpriv,
+				    struct pci_dev *pdev)
+{
+	static const struct dmi_system_id sysids[] = {
+		{
+			.ident = "Acer Switch Alpha 12",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271")
+			},
+		},
+		{ }
+	};
+
+	if (dmi_check_system(sysids)) {
+		dev_info(&pdev->dev, "enabling Acer Switch Alpha 12 workaround\n");
+		if ((hpriv->saved_cap & 0xC734FF00) == 0xC734FF00) {
+			hpriv->port_map = 0x7;
+			hpriv->cap = 0xC734FF02;
+		}
+	}
+}
+
 #ifdef CONFIG_ARM64
 /*
  * Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently.
@@ -1636,6 +1670,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			 "online status unreliable, applying workaround\n");
 	}
 
+
+	/* Acer SA5-271 workaround modifies private_data */
+	acer_sa5_271_workaround(hpriv, pdev);
+
 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 5db6ab261643..30f67a1a4f54 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -24,7 +24,7 @@
  *
  *
  * libata documentation is available via 'make {ps|pdf}docs',
- * as Documentation/DocBook/libata.*
+ * as Documentation/driver-api/libata.rst
  *
  * AHCI hardware documentation:
  * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ffbe625e6fd2..8401c3b5be92 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -33,7 +33,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available at http://developer.intel.com/
  *
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 3159f9e66d8f..6154f0e2b81a 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -24,7 +24,7 @@
  *
  *
  * libata documentation is available via 'make {ps|pdf}docs',
- * as Documentation/DocBook/libata.*
+ * as Documentation/driver-api/libata.rst
  *
  * AHCI hardware documentation:
  * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index aaa761b9081c..cd2eab6aa92e 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -514,8 +514,9 @@ int ahci_platform_init_host(struct platform_device *pdev,
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
-		dev_err(dev, "no irq\n");
-		return -EINVAL;
+		if (irq != -EPROBE_DEFER)
+			dev_err(dev, "no irq\n");
+		return irq;
 	}
 
 	hpriv->irq = irq;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2d83b8c75965..b82d6bb88d27 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available from http://www.t13.org/ and
  *  http://www.sata-io.org/
@@ -6800,7 +6800,7 @@ static int __init ata_parse_force_one(char **cur,
 	}
 
 	force_ent->port = simple_strtoul(id, &endp, 10);
-	if (p == endp || *endp != '\0') {
+	if (id == endp || *endp != '\0') {
 		*reason = "invalid port/link";
 		return -EINVAL;
 	}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ef68232b5222..7e33e200aae5 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available from http://www.t13.org/ and
  *  http://www.sata-io.org/
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 49ba9834c715..b0866f040d1f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available from
  *  - http://www.t10.org/
@@ -3398,9 +3398,10 @@ static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax,
  *
  * Translate a SCSI WRITE SAME command to be either a DSM TRIM command or
  * an SCT Write Same command.
- * Based on WRITE SAME has the UNMAP flag
- *   When set translate to DSM TRIM
- *   When clear translate to SCT Write Same
+ * Based on WRITE SAME has the UNMAP flag:
+ *
+ *   - When set translate to DSM TRIM
+ *   - When clear translate to SCT Write Same
  */
 static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 274d6d7193d7..052921352f31 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available from http://www.t13.org/ and
  *  http://www.sata-io.org/
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index f3a65a3140d3..8a01d09ac4db 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -174,8 +174,7 @@ void zpodd_enable_run_wake(struct ata_device *dev)
 	sdev_disable_disk_events(dev->sdev);
 
 	zpodd->powered_off = true;
-	device_set_run_wake(&dev->tdev, true);
-	acpi_pm_device_run_wake(&dev->tdev, true);
+	acpi_pm_set_device_wakeup(&dev->tdev, true);
 }
 
 /* Disable runtime wake capability if it is enabled */
@@ -183,10 +182,8 @@ void zpodd_disable_run_wake(struct ata_device *dev)
 {
 	struct zpodd *zpodd = dev->zpodd;
 
-	if (zpodd->powered_off) {
-		acpi_pm_device_run_wake(&dev->tdev, false);
-		device_set_run_wake(&dev->tdev, false);
-	}
+	if (zpodd->powered_off)
+		acpi_pm_set_device_wakeup(&dev->tdev, false);
 }
 
 /*
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 120fce0befd3..5afe35baf61b 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -21,7 +21,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  */
 
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index d9ef9e276225..82bfd51692f3 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -17,7 +17,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware information only available under NDA.
  *
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 64d682c6ee57..f1e873a37465 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -21,7 +21,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *
  *  Supports ATA disks in single-packet ADMA mode.
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index b66bcda88320..3b2246dded74 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4067,7 +4067,6 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct mv_host_priv *hpriv;
 	struct resource *res;
-	void __iomem *mmio;
 	int n_ports = 0, irq = 0;
 	int rc;
 	int port;
@@ -4086,9 +4085,8 @@ static int mv_platform_probe(struct platform_device *pdev)
 	 * Get the register base first
 	 */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mmio = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(mmio))
-		return PTR_ERR(mmio);
+	if (res == NULL)
+		return -EINVAL;
 
 	/* allocate host */
 	if (pdev->dev.of_node) {
@@ -4132,7 +4130,12 @@ static int mv_platform_probe(struct platform_device *pdev)
 	hpriv->board_idx = chip_soc;
 
 	host->iomap = NULL;
-	hpriv->base = mmio - SATAHC0_REG_BASE;
+	hpriv->base = devm_ioremap(&pdev->dev, res->start,
+				   resource_size(res));
+	if (!hpriv->base)
+		return -ENOMEM;
+
+	hpriv->base -= SATAHC0_REG_BASE;
 
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 734f563b8d37..8c683ddd0f58 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -21,7 +21,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  No hardware documentation available outside of NVIDIA.
  *  This driver programs the NVIDIA SATA controller in a similar
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 0fa211e2831c..d032bf657f70 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware information only available under NDA.
  *
diff --git a/drivers/ata/sata_promise.h b/drivers/ata/sata_promise.h
index 00d6000e546f..61633ef5ed72 100644
--- a/drivers/ata/sata_promise.h
+++ b/drivers/ata/sata_promise.h
@@ -20,7 +20,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  */
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index af987a4f33d1..1fe941688e95 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -23,7 +23,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  */
 
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 5d38245a7a73..b7939a2c1fab 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -890,7 +890,10 @@ static int sata_rcar_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to get access to sata clock\n");
 		return PTR_ERR(priv->clk);
 	}
-	clk_prepare_enable(priv->clk);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	host = ata_host_alloc(&pdev->dev, 1);
 	if (!host) {
@@ -970,8 +973,11 @@ static int sata_rcar_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct sata_rcar_priv *priv = host->private_data;
 	void __iomem *base = priv->base;
+	int ret;
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	/* ack and mask */
 	iowrite32(0, base + SATAINTSTAT_REG);
@@ -988,8 +994,11 @@ static int sata_rcar_restore(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct sata_rcar_priv *priv = host->private_data;
+	int ret;
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	sata_rcar_setup_port(host);
 
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 29bcff086bce..ed76f070d21e 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Documentation for SiI 3112:
  *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index d1637ac40a73..30f4f35f36d4 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -24,7 +24,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available under NDA.
  *
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index ff614be55d0f..0fd6ac7e57ba 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -30,7 +30,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available under NDA.
  *
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 48301cb3a316..405e606a234d 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -24,7 +24,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available under NDA.
  *
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 08f98c3ed5c8..4f6e8d8156de 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -18,7 +18,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available under NDA.
  *
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f3f538eec7b3..22e96fc77d09 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -25,7 +25,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Hardware documentation available under NDA.
  *
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 183eb52085df..9648127cca70 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -26,7 +26,7 @@
  *
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
+ *  as Documentation/driver-api/libata.rst
  *
  *  Vitesse hardware documentation presumably available under NDA.
  *  Intel 31244 (same hardware interface) documentation presumably