diff options
Diffstat (limited to 'drivers/base/power')
| -rw-r--r-- | drivers/base/power/clock_ops.c | 2 | ||||
| -rw-r--r-- | drivers/base/power/domain.c | 145 | ||||
| -rw-r--r-- | drivers/base/power/domain_governor.c | 20 | ||||
| -rw-r--r-- | drivers/base/power/main.c | 18 | ||||
| -rw-r--r-- | drivers/base/power/opp/Makefile | 1 | ||||
| -rw-r--r-- | drivers/base/power/opp/core.c | 443 | ||||
| -rw-r--r-- | drivers/base/power/opp/cpu.c | 199 | ||||
| -rw-r--r-- | drivers/base/power/opp/of.c | 591 | ||||
| -rw-r--r-- | drivers/base/power/opp/opp.h | 14 | ||||
| -rw-r--r-- | drivers/base/power/runtime.c | 9 | ||||
| -rw-r--r-- | drivers/base/power/wakeup.c | 2 |
11 files changed, 808 insertions, 636 deletions
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 0e64a1b5e62a..3657ac1cb801 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -159,7 +159,7 @@ int of_pm_clk_add_clks(struct device *dev) count = of_count_phandle_with_args(dev->of_node, "clocks", "#clock-cells"); - if (count == 0) + if (count <= 0) return -ENODEV; clks = kcalloc(count, sizeof(*clks), GFP_KERNEL); diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 56705b52758e..de23b648fce3 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -229,17 +229,6 @@ static int genpd_poweron(struct generic_pm_domain *genpd, unsigned int depth) return ret; } -static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev) -{ - return GENPD_DEV_CALLBACK(genpd, int, save_state, dev); -} - -static int genpd_restore_dev(struct generic_pm_domain *genpd, - struct device *dev) -{ - return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev); -} - static int genpd_dev_pm_qos_notifier(struct notifier_block *nb, unsigned long val, void *ptr) { @@ -372,17 +361,63 @@ static void genpd_power_off_work_fn(struct work_struct *work) } /** - * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. + * __genpd_runtime_suspend - walk the hierarchy of ->runtime_suspend() callbacks + * @dev: Device to handle. + */ +static int __genpd_runtime_suspend(struct device *dev) +{ + int (*cb)(struct device *__dev); + + if (dev->type && dev->type->pm) + cb = dev->type->pm->runtime_suspend; + else if (dev->class && dev->class->pm) + cb = dev->class->pm->runtime_suspend; + else if (dev->bus && dev->bus->pm) + cb = dev->bus->pm->runtime_suspend; + else + cb = NULL; + + if (!cb && dev->driver && dev->driver->pm) + cb = dev->driver->pm->runtime_suspend; + + return cb ? cb(dev) : 0; +} + +/** + * __genpd_runtime_resume - walk the hierarchy of ->runtime_resume() callbacks + * @dev: Device to handle. + */ +static int __genpd_runtime_resume(struct device *dev) +{ + int (*cb)(struct device *__dev); + + if (dev->type && dev->type->pm) + cb = dev->type->pm->runtime_resume; + else if (dev->class && dev->class->pm) + cb = dev->class->pm->runtime_resume; + else if (dev->bus && dev->bus->pm) + cb = dev->bus->pm->runtime_resume; + else + cb = NULL; + + if (!cb && dev->driver && dev->driver->pm) + cb = dev->driver->pm->runtime_resume; + + return cb ? cb(dev) : 0; +} + +/** + * genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. * @dev: Device to suspend. * * Carry out a runtime suspend of a device under the assumption that its * pm_domain field points to the domain member of an object of type * struct generic_pm_domain representing a PM domain consisting of I/O devices. */ -static int pm_genpd_runtime_suspend(struct device *dev) +static int genpd_runtime_suspend(struct device *dev) { struct generic_pm_domain *genpd; - bool (*stop_ok)(struct device *__dev); + bool (*suspend_ok)(struct device *__dev); struct gpd_timing_data *td = &dev_gpd_data(dev)->td; bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; @@ -401,21 +436,21 @@ static int pm_genpd_runtime_suspend(struct device *dev) * runtime PM is disabled. Under these circumstances, we shall skip * validating/measuring the PM QoS latency. */ - stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL; - if (runtime_pm && stop_ok && !stop_ok(dev)) + suspend_ok = genpd->gov ? genpd->gov->suspend_ok : NULL; + if (runtime_pm && suspend_ok && !suspend_ok(dev)) return -EBUSY; /* Measure suspend latency. */ if (runtime_pm) time_start = ktime_get(); - ret = genpd_save_dev(genpd, dev); + ret = __genpd_runtime_suspend(dev); if (ret) return ret; ret = genpd_stop_dev(genpd, dev); if (ret) { - genpd_restore_dev(genpd, dev); + __genpd_runtime_resume(dev); return ret; } @@ -446,14 +481,14 @@ static int pm_genpd_runtime_suspend(struct device *dev) } /** - * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain. + * genpd_runtime_resume - Resume a device belonging to I/O PM domain. * @dev: Device to resume. * * Carry out a runtime resume of a device under the assumption that its * pm_domain field points to the domain member of an object of type * struct generic_pm_domain representing a PM domain consisting of I/O devices. */ -static int pm_genpd_runtime_resume(struct device *dev) +static int genpd_runtime_resume(struct device *dev) { struct generic_pm_domain *genpd; struct gpd_timing_data *td = &dev_gpd_data(dev)->td; @@ -491,7 +526,7 @@ static int pm_genpd_runtime_resume(struct device *dev) if (ret) goto err_poweroff; - ret = genpd_restore_dev(genpd, dev); + ret = __genpd_runtime_resume(dev); if (ret) goto err_stop; @@ -695,15 +730,6 @@ static int pm_genpd_prepare(struct device *dev) * at this point and a system wakeup event should be reported if it's * set up to wake up the system from sleep states. */ - pm_runtime_get_noresume(dev); - if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) - pm_wakeup_event(dev, 0); - - if (pm_wakeup_pending()) { - pm_runtime_put(dev); - return -EBUSY; - } - if (resume_needed(dev, genpd)) pm_runtime_resume(dev); @@ -716,10 +742,8 @@ static int pm_genpd_prepare(struct device *dev) mutex_unlock(&genpd->lock); - if (genpd->suspend_power_off) { - pm_runtime_put_noidle(dev); + if (genpd->suspend_power_off) return 0; - } /* * The PM domain must be in the GPD_STATE_ACTIVE state at this point, @@ -741,7 +765,6 @@ static int pm_genpd_prepare(struct device *dev) pm_runtime_enable(dev); } - pm_runtime_put(dev); return ret; } @@ -1427,54 +1450,6 @@ out: } EXPORT_SYMBOL_GPL(pm_genpd_remove_subdomain); -/* Default device callbacks for generic PM domains. */ - -/** - * pm_genpd_default_save_state - Default "save device state" for PM domains. - * @dev: Device to handle. - */ -static int pm_genpd_default_save_state(struct device *dev) -{ - int (*cb)(struct device *__dev); - - if (dev->type && dev->type->pm) - cb = dev->type->pm->runtime_suspend; - else if (dev->class && dev->class->pm) - cb = dev->class->pm->runtime_suspend; - else if (dev->bus && dev->bus->pm) - cb = dev->bus->pm->runtime_suspend; - else - cb = NULL; - - if (!cb && dev->driver && dev->driver->pm) - cb = dev->driver->pm->runtime_suspend; - - return cb ? cb(dev) : 0; -} - -/** - * pm_genpd_default_restore_state - Default PM domains "restore device state". - * @dev: Device to handle. - */ -static int pm_genpd_default_restore_state(struct device *dev) -{ - int (*cb)(struct device *__dev); - - if (dev->type && dev->type->pm) - cb = dev->type->pm->runtime_resume; - else if (dev->class && dev->class->pm) - cb = dev->class->pm->runtime_resume; - else if (dev->bus && dev->bus->pm) - cb = dev->bus->pm->runtime_resume; - else - cb = NULL; - - if (!cb && dev->driver && dev->driver->pm) - cb = dev->driver->pm->runtime_resume; - - return cb ? cb(dev) : 0; -} - /** * pm_genpd_init - Initialize a generic I/O PM domain object. * @genpd: PM domain object to initialize. @@ -1498,8 +1473,8 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->device_count = 0; genpd->max_off_time_ns = -1; genpd->max_off_time_changed = true; - genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; - genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; + genpd->domain.ops.runtime_suspend = genpd_runtime_suspend; + genpd->domain.ops.runtime_resume = genpd_runtime_resume; genpd->domain.ops.prepare = pm_genpd_prepare; genpd->domain.ops.suspend = pm_genpd_suspend; genpd->domain.ops.suspend_late = pm_genpd_suspend_late; @@ -1520,8 +1495,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->domain.ops.restore_early = pm_genpd_resume_early; genpd->domain.ops.restore = pm_genpd_resume; genpd->domain.ops.complete = pm_genpd_complete; - genpd->dev_ops.save_state = pm_genpd_default_save_state; - genpd->dev_ops.restore_state = pm_genpd_default_restore_state; if (genpd->flags & GENPD_FLAG_PM_CLK) { genpd->dev_ops.stop = pm_clk_suspend; diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c index 00a5436dd44b..2e0fce711135 100644 --- a/drivers/base/power/domain_governor.c +++ b/drivers/base/power/domain_governor.c @@ -37,10 +37,10 @@ static int dev_update_qos_constraint(struct device *dev, void *data) } /** - * default_stop_ok - Default PM domain governor routine for stopping devices. + * default_suspend_ok - Default PM domain governor routine to suspend devices. * @dev: Device to check. */ -static bool default_stop_ok(struct device *dev) +static bool default_suspend_ok(struct device *dev) { struct gpd_timing_data *td = &dev_gpd_data(dev)->td; unsigned long flags; @@ -51,13 +51,13 @@ static bool default_stop_ok(struct device *dev) spin_lock_irqsave(&dev->power.lock, flags); if (!td->constraint_changed) { - bool ret = td->cached_stop_ok; + bool ret = td->cached_suspend_ok; spin_unlock_irqrestore(&dev->power.lock, flags); return ret; } td->constraint_changed = false; - td->cached_stop_ok = false; + td->cached_suspend_ok = false; td->effective_constraint_ns = -1; constraint_ns = __dev_pm_qos_read_value(dev); @@ -83,13 +83,13 @@ static bool default_stop_ok(struct device *dev) return false; } td->effective_constraint_ns = constraint_ns; - td->cached_stop_ok = constraint_ns >= 0; + td->cached_suspend_ok = constraint_ns >= 0; /* * The children have been suspended already, so we don't need to take - * their stop latencies into account here. + * their suspend latencies into account here. */ - return td->cached_stop_ok; + return td->cached_suspend_ok; } /** @@ -150,7 +150,7 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd, */ td = &to_gpd_data(pdd)->td; constraint_ns = td->effective_constraint_ns; - /* default_stop_ok() need not be called before us. */ + /* default_suspend_ok() need not be called before us. */ if (constraint_ns < 0) { constraint_ns = dev_pm_qos_read_value(pdd->dev); constraint_ns *= NSEC_PER_USEC; @@ -227,7 +227,7 @@ static bool always_on_power_down_ok(struct dev_pm_domain *domain) } struct dev_power_governor simple_qos_governor = { - .stop_ok = default_stop_ok, + .suspend_ok = default_suspend_ok, .power_down_ok = default_power_down_ok, }; @@ -236,5 +236,5 @@ struct dev_power_governor simple_qos_governor = { */ struct dev_power_governor pm_domain_always_on_gov = { .power_down_ok = always_on_power_down_ok, - .stop_ok = default_stop_ok, + .suspend_ok = default_suspend_ok, }; diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 6e7c3ccea24b..c81667d4bb60 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1556,7 +1556,6 @@ int dpm_suspend(pm_message_t state) static int device_prepare(struct device *dev, pm_message_t state) { int (*callback)(struct device *) = NULL; - char *info = NULL; int ret = 0; if (dev->power.syscore) @@ -1579,24 +1578,17 @@ static int device_prepare(struct device *dev, pm_message_t state) goto unlock; } - if (dev->pm_domain) { - info = "preparing power domain "; + if (dev->pm_domain) callback = dev->pm_domain->ops.prepare; - } else if (dev->type && dev->type->pm) { - info = "preparing type "; + else if (dev->type && dev->type->pm) callback = dev->type->pm->prepare; - } else if (dev->class && dev->class->pm) { - info = "preparing class "; + else if (dev->class && dev->class->pm) callback = dev->class->pm->prepare; - } else if (dev->bus && dev->bus->pm) { - info = "preparing bus "; + else if (dev->bus && dev->bus->pm) callback = dev->bus->pm->prepare; - } - if (!callback && dev->driver && dev->driver->pm) { - info = "preparing driver "; + if (!callback && dev->driver && dev->driver->pm) callback = dev->driver->pm->prepare; - } if (callback) ret = callback(dev); diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile index 19837ef04d8e..e70ceb406fe9 100644 --- a/drivers/base/power/opp/Makefile +++ b/drivers/base/power/opp/Makefile @@ -1,3 +1,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG obj-y += core.o cpu.o +obj-$(CONFIG_OF) += of.o obj-$(CONFIG_DEBUG_FS) += debugfs.o diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 433b60092972..7c04c87738a6 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/device.h> -#include <linux/of.h> #include <linux/export.h> #include <linux/regulator/consumer.h> @@ -29,7 +28,7 @@ * from here, with each opp_table containing the list of opps it supports in * various states of availability. */ -static LIST_HEAD(opp_tables); +LIST_HEAD(opp_tables); /* Lock to allow exclusive modification to the device and opp lists */ DEFINE_MUTEX(opp_table_lock); @@ -53,26 +52,6 @@ static struct opp_device *_find_opp_dev(const struct device *dev, return NULL; } -static struct opp_table *_managed_opp(const struct device_node *np) -{ - struct opp_table *opp_table; - - list_for_each_entry_rcu(opp_table, &opp_tables, node) { - if (opp_table->np == np) { - /* - * Multiple devices can point to the same OPP table and - * so will have same node-pointer, np. - * - * But the OPPs will be considered as shared only if the - * OPP table contains a "opp-shared" property. - */ - return opp_table->shared_opp ? opp_table : NULL; - } - } - - return NULL; -} - /** * _find_opp_table() - find opp_table struct using device pointer * @dev: device pointer used to lookup OPP table @@ -259,9 +238,6 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) reg = opp_table->regulator; if (IS_ERR(reg)) { /* Regulator may not be required for device */ - if (reg) - dev_err(dev, "%s: Invalid regulator (%ld)\n", __func__, - PTR_ERR(reg)); rcu_read_unlock(); return 0; } @@ -760,7 +736,6 @@ static struct opp_table *_add_opp_table(struct device *dev) { struct opp_table *opp_table; struct opp_device *opp_dev; - struct device_node *np; int ret; /* Check for existing table for 'dev' first */ @@ -784,20 +759,7 @@ static struct opp_table *_add_opp_table(struct device *dev) return NULL; } - /* - * Only required for backward compatibility with v1 bindings, but isn't - * harmful for other cases. And so we do it unconditionally. - */ - np = of_node_get(dev->of_node); - if (np) { - u32 val; - - if (!of_property_read_u32(np, "clock-latency", &val)) - opp_table->clock_latency_ns_max = val; - of_property_read_u32(np, "voltage-tolerance", - &opp_table->voltage_tolerance_v1); - of_node_put(np); - } + _of_init_opp_table(opp_table, dev); /* Set regulator to a non-NULL error value */ opp_table->regulator = ERR_PTR(-ENXIO); @@ -893,8 +855,8 @@ static void _kfree_opp_rcu(struct rcu_head *head) * It is assumed that the caller holds required mutex for an RCU updater * strategy. */ -static void _opp_remove(struct opp_table *opp_table, - struct dev_pm_opp *opp, bool notify) +void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, + bool notify) { /* * Notify the changes in the availability of the operable @@ -955,8 +917,8 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_remove); -static struct dev_pm_opp *_allocate_opp(struct device *dev, - struct opp_table **opp_table) +struct dev_pm_opp *_allocate_opp(struct device *dev, + struct opp_table **opp_table) { struct dev_pm_opp *opp; @@ -992,8 +954,8 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, return true; } -static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, - struct opp_table *opp_table) +int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, + struct opp_table *opp_table) { struct dev_pm_opp *opp; struct list_head *head = &opp_table->opp_list; @@ -1069,8 +1031,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */ -static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, - bool dynamic) +int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, + bool dynamic) { struct opp_table *opp_table; struct dev_pm_opp *new_opp; @@ -1115,83 +1077,6 @@ unlock: return ret; } -/* TODO: Support multiple regulators */ -static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, - struct opp_table *opp_table) -{ - u32 microvolt[3] = {0}; - u32 val; - int count, ret; - struct property *prop = NULL; - char name[NAME_MAX]; - - /* Search for "opp-microvolt-<name>" */ - if (opp_table->prop_name) { - snprintf(name, sizeof(name), "opp-microvolt-%s", - opp_table->prop_name); - prop = of_find_property(opp->np, name, NULL); - } - - if (!prop) { - /* Search for "opp-microvolt" */ - sprintf(name, "opp-microvolt"); - prop = of_find_property(opp->np, name, NULL); - - /* Missing property isn't a problem, but an invalid entry is */ - if (!prop) - return 0; - } - - count = of_property_count_u32_elems(opp->np, name); - if (count < 0) { - dev_err(dev, "%s: Invalid %s property (%d)\n", - __func__, name, count); - return count; - } - - /* There can be one or three elements here */ - if (count != 1 && count != 3) { - dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n", - __func__, name, count); - return -EINVAL; - } - - ret = of_property_read_u32_array(opp->np, name, microvolt, count); - if (ret) { - dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); - return -EINVAL; - } - - opp->u_volt = microvolt[0]; - - if (count == 1) { - opp->u_volt_min = opp->u_volt; - opp->u_volt_max = opp->u_volt; - } else { - opp->u_volt_min = microvolt[1]; - opp->u_volt_max = microvolt[2]; - } - - /* Search for "opp-microamp-<name>" */ - prop = NULL; - if (opp_table->prop_name) { - snprintf(name, sizeof(name), "opp-microamp-%s", - opp_table->prop_name); - prop = of_find_property(opp->np, name, NULL); - } - - if (!prop) { - /* Search for "opp-microamp" */ - sprintf(name, "opp-microamp"); - prop = of_find_property(opp->np, name, NULL); - } - - if (prop && !of_property_read_u32(opp->np, name, &val)) - opp->u_amp = val; - - return 0; -} - /** * dev_pm_opp_set_supported_hw() - Set supported platforms * @dev: Device for which supported-hw has to be set. @@ -1520,144 +1405,6 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator); -static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, - struct device_node *np) -{ - unsigned int count = opp_table->supported_hw_count; - u32 version; - int ret; - - if (!opp_table->supported_hw) - return true; - - while (count--) { - ret = of_property_read_u32_index(np, "opp-supported-hw", count, - &version); - if (ret) { - dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n", - __func__, count, ret); - return false; - } - - /* Both of these are bitwise masks of the versions */ - if (!(version & opp_table->supported_hw[count])) - return false; - } - - return true; -} - -/** - * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) - * @dev: device for which we do this operation - * @np: device node - * - * This function adds an opp definition to the opp table and returns status. The - * opp can be controlled using dev_pm_opp_enable/disable functions and may be - * removed by dev_pm_opp_remove. - * - * Locking: The internal opp_table and opp structures are RCU protected. - * Hence this function internally uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -EINVAL Failed parsing the OPP node - */ -static int _opp_add_static_v2(struct device *dev, struct device_node *np) -{ - struct opp_table *opp_table; - struct dev_pm_opp *new_opp; - u64 rate; - u32 val; - int ret; - - /* Hold our table modification lock here */ - mutex_lock(&opp_table_lock); - - new_opp = _allocate_opp(dev, &opp_table); - if (!new_opp) { - ret = -ENOMEM; - goto unlock; - } - - ret = of_property_read_u64(np, "opp-hz", &rate); - if (ret < 0) { - dev_err(dev, "%s: opp-hz not found\n", __func__); - goto free_opp; - } - - /* Check if the OPP supports hardware's hierarchy of versions or not */ - if (!_opp_is_supported(dev, opp_table, np)) { - dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); - goto free_opp; - } - - /* - * Rate is defined as an unsigned long in clk API, and so casting - * explicitly to its type. Must be fixed once rate is 64 bit - * guaranteed in clk API. - */ - new_opp->rate = (unsigned long)rate; - new_opp->turbo = of_property_read_bool(np, "turbo-mode"); - - new_opp->np = np; - new_opp->dynamic = false; - new_opp->available = true; - - if (!of_property_read_u32(np, "clock-latency-ns", &val)) - new_opp->clock_latency_ns = val; - - ret = opp_parse_supplies(new_opp, dev, opp_table); - if (ret) - goto free_opp; - - ret = _opp_add(dev, new_opp, opp_table); - if (ret) - goto free_opp; - - /* OPP to select on device suspend */ - if (of_property_read_bool(np, "opp-suspend")) { - if (opp_table->suspend_opp) { - dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n", - __func__, opp_table->suspend_opp->rate, - new_opp->rate); - } else { - new_opp->suspend = true; - opp_table->suspend_opp = new_opp; - } - } - - if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) - opp_table->clock_latency_ns_max = new_opp->clock_latency_ns; - - mutex_unlock(&opp_table_lock); - - pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", - __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, - new_opp->u_volt_min, new_opp->u_volt_max, - new_opp->clock_latency_ns); - - /* - * Notify the changes in the availability of the operable - * frequency/voltage list. - */ - srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp); - return 0; - -free_opp: - _opp_remove(opp_table, new_opp, false); -unlock: - mutex_unlock(&opp_table_lock); - return ret; -} - /** * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation @@ -1845,21 +1592,11 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) } EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier); -#ifdef CONFIG_OF -/** - * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT - * entries - * @dev: device pointer used to lookup OPP table. - * - * Free OPPs created using static entries present in DT. - * - * Locking: The internal opp_table and opp structures are RCU protected. - * Hence this function indirectly uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. +/* + * Free OPPs either created using static entries present in DT or even the + * dynamically added entries based on remove_all param. */ -void dev_pm_opp_of_remove_table(struct device *dev) +void _dev_pm_opp_remove_table(struct device *dev, bool remove_all) { struct opp_table *opp_table; struct dev_pm_opp *opp, *tmp; @@ -1884,7 +1621,7 @@ void dev_pm_opp_of_remove_table(struct device *dev) if (list_is_singular(&opp_table->dev_list)) { /* Free static OPPs */ list_for_each_entry_safe(opp, tmp, &opp_table->opp_list, node) { - if (!opp->dynamic) + if (remove_all || !opp->dynamic) _opp_remove(opp_table, opp, true); } } else { @@ -1894,160 +1631,22 @@ void dev_pm_opp_of_remove_table(struct device *dev) unlock: mutex_unlock(&opp_table_lock); } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); - -/* Returns opp descriptor node for a device, caller must do of_node_put() */ -struct device_node *_of_get_opp_desc_node(struct device *dev) -{ - /* - * TODO: Support for multiple OPP tables. - * - * There should be only ONE phandle present in "operating-points-v2" - * property. - */ - - return of_parse_phandle(dev->of_node, "operating-points-v2", 0); -} - -/* Initializes OPP tables based on new bindings */ -static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) -{ - struct device_node *np; - struct opp_table *opp_table; - int ret = 0, count = 0; - - mutex_lock(&opp_table_lock); - - opp_table = _managed_opp(opp_np); - if (opp_table) { - /* OPPs are already managed */ - if (!_add_opp_dev(dev, opp_table)) - ret = -ENOMEM; - mutex_unlock(&opp_table_lock); - return ret; - } - mutex_unlock(&opp_table_lock); - - /* We have opp-table node now, iterate over it and add OPPs */ - for_each_available_child_of_node(opp_np, np) { - count++; - - ret = _opp_add_static_v2(dev, np); - if (ret) { - dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, - ret); - goto free_table; - } - } - - /* There should be one of more OPP defined */ - if (WARN_ON(!count)) - return -ENOENT; - - mutex_lock(&opp_table_lock); - - opp_table = _find_opp_table(dev); - if (WARN_ON(IS_ERR(opp_table))) { - ret = PTR_ERR(opp_table); - mutex_unlock(&opp_table_lock); - goto free_table; - } - - opp_table->np = opp_np; - opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared"); - - mutex_unlock(&opp_table_lock); - - return 0; - -free_table: - dev_pm_opp_of_remove_table(dev); - - return ret; -} - -/* Initializes OPP tables based on old-deprecated bindings */ -static int _of_add_opp_table_v1(struct device *dev) -{ - const struct property *prop; - const __be32 *val; - int nr; - - prop = of_find_property(dev->of_node, "operating-points", NULL); - if (!prop) - return -ENODEV; - if (!prop->value) - return -ENODATA; - - /* - * Each OPP is a set of tuples consisting of frequency and - * voltage like <freq-kHz vol-uV>. - */ - nr = prop->length / sizeof(u32); - if (nr % 2) { - dev_err(dev, "%s: Invalid OPP table\n", __func__); - return -EINVAL; - } - - val = prop->value; - while (nr) { - unsigned long freq = be32_to_cpup(val++) * 1000; - unsigned long volt = be32_to_cpup(val++); - - if (_opp_add_v1(dev, freq, volt, false)) - dev_warn(dev, "%s: Failed to add OPP %ld\n", - __func__, freq); - nr -= 2; - } - - return 0; -} /** - * dev_pm_opp_of_add_table() - Initialize opp table from device tree + * dev_pm_opp_remove_table() - Free all OPPs associated with the device * @dev: device pointer used to lookup OPP table. * - * Register the initial OPP table with the OPP library for given device. + * Free both OPPs created using static entries present in DT and the + * dynamically added entries. * * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function indirectly uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -ENODEV when 'operating-points' property is not found or is invalid data - * in device node. - * -ENODATA when empty 'operating-points' property is found - * -EINVAL when invalid entries are found in opp-v2 table */ -int dev_pm_opp_of_add_table(struct device *dev) +void dev_pm_opp_remove_table(struct device *dev) { - struct device_node *opp_np; - int ret; - - /* - * OPPs have two version of bindings now. The older one is deprecated, - * try for the new binding first. - */ - opp_np = _of_get_opp_desc_node(dev); - if (!opp_np) { - /* - * Try old-deprecated bindings for backward compatibility with - * older dtbs. - */ - return _of_add_opp_table_v1(dev); - } - - ret = _of_add_opp_table_v2(dev, opp_np); - of_node_put(opp_np); - - return ret; + _dev_pm_opp_remove_table(dev, true); } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); -#endif +EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table); diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c index ba2bdbd932ef..83d6e7ba1a34 100644 --- a/drivers/base/power/opp/cpu.c +++ b/drivers/base/power/opp/cpu.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <linux/errno.h> #include <linux/export.h> -#include <linux/of.h> #include <linux/slab.h> #include "opp.h" @@ -119,8 +118,66 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev, EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); #endif /* CONFIG_CPU_FREQ */ -/* Required only for V1 bindings, as v2 can manage it from DT itself */ -int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) +void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of) +{ + struct device *cpu_dev; + int cpu; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + if (of) + dev_pm_opp_of_remove_table(cpu_dev); + else + dev_pm_opp_remove_table(cpu_dev); + } +} + +/** + * dev_pm_opp_cpumask_remove_table() - Removes OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be removed + * + * This removes the OPP tables for CPUs present in the @cpumask. + * This should be used to remove all the OPPs entries associated with + * the cpus in @cpumask. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask) +{ + _dev_pm_opp_cpumask_remove_table(cpumask, false); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_remove_table); + +/** + * dev_pm_opp_set_sharing_cpus() - Mark OPP table as shared by few CPUs + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask of the CPUs which share the OPP table with @cpu_dev + * + * This marks OPP table of the @cpu_dev as shared by the CPUs present in + * @cpumask. + * + * Returns -ENODEV if OPP table isn't already present. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, + const struct cpumask *cpumask) { struct opp_device *opp_dev; struct opp_table *opp_table; @@ -131,7 +188,7 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) opp_table = _find_opp_table(cpu_dev); if (IS_ERR(opp_table)) { - ret = -EINVAL; + ret = PTR_ERR(opp_table); goto unlock; } @@ -152,6 +209,9 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) __func__, cpu); continue; } + + /* Mark opp-table as multiple CPUs are sharing it now */ + opp_table->shared_opp = true; } unlock: mutex_unlock(&opp_table_lock); @@ -160,112 +220,47 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus); -#ifdef CONFIG_OF -void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask) -{ - struct device *cpu_dev; - int cpu; - - WARN_ON(cpumask_empty(cpumask)); - - for_each_cpu(cpu, cpumask) { - cpu_dev = get_cpu_device(cpu); - if (!cpu_dev) { - pr_err("%s: failed to get cpu%d device\n", __func__, - cpu); - continue; - } - - dev_pm_opp_of_remove_table(cpu_dev); - } -} -EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table); - -int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask) -{ - struct device *cpu_dev; - int cpu, ret = 0; - - WARN_ON(cpumask_empty(cpumask)); - - for_each_cpu(cpu, cpumask) { - cpu_dev = get_cpu_device(cpu); - if (!cpu_dev) { - pr_err("%s: failed to get cpu%d device\n", __func__, - cpu); - continue; - } - - ret = dev_pm_opp_of_add_table(cpu_dev); - if (ret) { - pr_err("%s: couldn't find opp table for cpu:%d, %d\n", - __func__, cpu, ret); - - /* Free all other OPPs */ - dev_pm_opp_of_cpumask_remove_table(cpumask); - break; - } - } - - return ret; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); - -/* - * Works only for OPP v2 bindings. +/** + * dev_pm_opp_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with @cpu_dev + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask to update with information of sharing CPUs + * + * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. * - * Returns -ENOENT if operating-points-v2 bindings aren't supported. + * Returns -ENODEV if OPP table isn't already present. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. */ -int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) +int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - struct device_node *np, *tmp_np; - struct device *tcpu_dev; - int cpu, ret = 0; - - /* Get OPP descriptor node */ - np = _of_get_opp_desc_node(cpu_dev); - if (!np) { - dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__); - return -ENOENT; - } - - cpumask_set_cpu(cpu_dev->id, cpumask); - - /* OPPs are shared ? */ - if (!of_property_read_bool(np, "opp-shared")) - goto put_cpu_node; - - for_each_possible_cpu(cpu) { - if (cpu == cpu_dev->id) - continue; + struct opp_device *opp_dev; + struct opp_table *opp_table; + int ret = 0; - tcpu_dev = get_cpu_device(cpu); - if (!tcpu_dev) { - dev_err(cpu_dev, "%s: failed to get cpu%d device\n", - __func__, cpu); - ret = -ENODEV; - goto put_cpu_node; - } + mutex_lock(&opp_table_lock); - /* Get OPP descriptor node */ - tmp_np = _of_get_opp_desc_node(tcpu_dev); - if (!tmp_np) { - dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n", - __func__); - ret = -ENOENT; - goto put_cpu_node; - } + opp_table = _find_opp_table(cpu_dev); + if (IS_ERR(opp_table)) { + ret = PTR_ERR(opp_table); + goto unlock; + } - /* CPUs are sharing opp node */ - if (np == tmp_np) - cpumask_set_cpu(cpu, cpumask); + cpumask_clear(cpumask); - of_node_put(tmp_np); + if (opp_table->shared_opp) { + list_for_each_entry(opp_dev, &opp_table->dev_list, node) + cpumask_set_cpu(opp_dev->dev->id, cpumask); + } else { + cpumask_set_cpu(cpu_dev->id, cpumask); } -put_cpu_node: - of_node_put(np); +unlock: + mutex_unlock(&opp_table_lock); + return ret; } -EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus); -#endif +EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus); diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c new file mode 100644 index 000000000000..94d2010558e3 --- /dev/null +++ b/drivers/base/power/opp/of.c @@ -0,0 +1,591 @@ +/* + * Generic OPP OF helpers + * + * Copyright (C) 2009-2010 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/export.h> + +#include "opp.h" + +static struct opp_table *_managed_opp(const struct device_node *np) +{ + struct opp_table *opp_table; + + list_for_each_entry_rcu(opp_table, &opp_tables, node) { + if (opp_table->np == np) { + /* + * Multiple devices can point to the same OPP table and + * so will have same node-pointer, np. + * + * But the OPPs will be considered as shared only if the + * OPP table contains a "opp-shared" property. + */ + return opp_table->shared_opp ? opp_table : NULL; + } + } + + return NULL; +} + +void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) +{ + struct device_node *np; + + /* + * Only required for backward compatibility with v1 bindings, but isn't + * harmful for other cases. And so we do it unconditionally. + */ + np = of_node_get(dev->of_node); + if (np) { + u32 val; + + if (!of_property_read_u32(np, "clock-latency", &val)) + opp_table->clock_latency_ns_max = val; + of_property_read_u32(np, "voltage-tolerance", + &opp_table->voltage_tolerance_v1); + of_node_put(np); + } +} + +static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, + struct device_node *np) +{ + unsigned int count = opp_table->supported_hw_count; + u32 version; + int ret; + + if (!opp_table->supported_hw) + return true; + + while (count--) { + ret = of_property_read_u32_index(np, "opp-supported-hw", count, + &version); + if (ret) { + dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n", + __func__, count, ret); + return false; + } + + /* Both of these are bitwise masks of the versions */ + if (!(version & opp_table->supported_hw[count])) + return false; + } + + return true; +} + +/* TODO: Support multiple regulators */ +static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, + struct opp_table *opp_table) +{ + u32 microvolt[3] = {0}; + u32 val; + int count, ret; + struct property *prop = NULL; + char name[NAME_MAX]; + + /* Search for "opp-microvolt-<name>" */ + if (opp_table->prop_name) { + snprintf(name, sizeof(name), "opp-microvolt-%s", + opp_table->prop_name); + prop = of_find_property(opp->np, name, NULL); + } + + if (!prop) { + /* Search for "opp-microvolt" */ + sprintf(name, "opp-microvolt"); + prop = of_find_property(opp->np, name, NULL); + + /* Missing property isn't a problem, but an invalid entry is */ + if (!prop) + return 0; + } + + count = of_property_count_u32_elems(opp->np, name); + if (count < 0) { + dev_err(dev, "%s: Invalid %s property (%d)\n", + __func__, name, count); + return count; + } + + /* There can be one or three elements here */ + if (count != 1 && count != 3) { + dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n", + __func__, name, count); + return -EINVAL; + } + + ret = of_property_read_u32_array(opp->np, name, microvolt, count); + if (ret) { + dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); + return -EINVAL; + } + + opp->u_volt = microvolt[0]; + + if (count == 1) { + opp->u_volt_min = opp->u_volt; + opp->u_volt_max = opp->u_volt; + } else { + opp->u_volt_min = microvolt[1]; + opp->u_volt_max = microvolt[2]; + } + + /* Search for "opp-microamp-<name>" */ + prop = NULL; + if (opp_table->prop_name) { + snprintf(name, sizeof(name), "opp-microamp-%s", + opp_table->prop_name); + prop = of_find_property(opp->np, name, NULL); + } + + if (!prop) { + /* Search for "opp-microamp" */ + sprintf(name, "opp-microamp"); + prop = of_find_property(opp->np, name, NULL); + } + + if (prop && !of_property_read_u32(opp->np, name, &val)) + opp->u_amp = val; + + return 0; +} + +/** + * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT + * entries + * @dev: device pointer used to lookup OPP table. + * + * Free OPPs created using static entries present in DT. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_of_remove_table(struct device *dev) +{ + _dev_pm_opp_remove_table(dev, false); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); + +/* Returns opp descriptor node for a device, caller must do of_node_put() */ +struct device_node *_of_get_opp_desc_node(struct device *dev) +{ + /* + * TODO: Support for multiple OPP tables. + * + * There should be only ONE phandle present in "operating-points-v2" + * property. + */ + + return of_parse_phandle(dev->of_node, "operating-points-v2", 0); +} + +/** + * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) + * @dev: device for which we do this operation + * @np: device node + * + * This function adds an opp definition to the opp table and returns status. The + * opp can be controlled using dev_pm_opp_enable/disable functions and may be + * removed by dev_pm_opp_remove. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -EINVAL Failed parsing the OPP node + */ +static int _opp_add_static_v2(struct device *dev, struct device_node *np) +{ + struct opp_table *opp_table; + struct dev_pm_opp *new_opp; + u64 rate; + u32 val; + int ret; + + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock); + + new_opp = _allocate_opp(dev, &opp_table); + if (!new_opp) { + ret = -ENOMEM; + goto unlock; + } + + ret = of_property_read_u64(np, "opp-hz", &rate); + if (ret < 0) { + dev_err(dev, "%s: opp-hz not found\n", __func__); + goto free_opp; + } + + /* Check if the OPP supports hardware's hierarchy of versions or not */ + if (!_opp_is_supported(dev, opp_table, np)) { + dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); + goto free_opp; + } + + /* + * Rate is defined as an unsigned long in clk API, and so casting + * explicitly to its type. Must be fixed once rate is 64 bit + * guaranteed in clk API. + */ + new_opp->rate = (unsigned long)rate; + new_opp->turbo = of_property_read_bool(np, "turbo-mode"); + + new_opp->np = np; + new_opp->dynamic = false; + new_opp->available = true; + + if (!of_property_read_u32(np, "clock-latency-ns", &val)) + new_opp->clock_latency_ns = val; + + ret = opp_parse_supplies(new_opp, dev, opp_table); + if (ret) + goto free_opp; + + ret = _opp_add(dev, new_opp, opp_table); + if (ret) + goto free_opp; + + /* OPP to select on device suspend */ + if (of_property_read_bool(np, "opp-suspend")) { + if (opp_table->suspend_opp) { + dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n", + __func__, opp_table->suspend_opp->rate, + new_opp->rate); + } else { + new_opp->suspend = true; + opp_table->suspend_opp = new_opp; + } + } + + if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) + opp_table->clock_latency_ns_max = new_opp->clock_latency_ns; + + mutex_unlock(&opp_table_lock); + + pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", + __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, + new_opp->u_volt_min, new_opp->u_volt_max, + new_opp->clock_latency_ns); + + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp); + return 0; + +free_opp: + _opp_remove(opp_table, new_opp, false); +unlock: + mutex_unlock(&opp_table_lock); + return ret; +} + +/* Initializes OPP tables based on new bindings */ +static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) +{ + struct device_node *np; + struct opp_table *opp_table; + int ret = 0, count = 0; + + mutex_lock(&opp_table_lock); + + opp_table = _managed_opp(opp_np); + if (opp_table) { + /* OPPs are already managed */ + if (!_add_opp_dev(dev, opp_table)) + ret = -ENOMEM; + mutex_unlock(&opp_table_lock); + return ret; + } + mutex_unlock(&opp_table_lock); + + /* We have opp-table node now, iterate over it and add OPPs */ + for_each_available_child_of_node(opp_np, np) { + count++; + + ret = _opp_add_static_v2(dev, np); + if (ret) { + dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, + ret); + goto free_table; + } + } + + /* There should be one of more OPP defined */ + if (WARN_ON(!count)) + return -ENOENT; + + mutex_lock(&opp_table_lock); + + opp_table = _find_opp_table(dev); + if (WARN_ON(IS_ERR(opp_table))) { + ret = PTR_ERR(opp_table); + mutex_unlock(&opp_table_lock); + goto free_table; + } + + opp_table->np = opp_np; + opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared"); + + mutex_unlock(&opp_table_lock); + + return 0; + +free_table: + dev_pm_opp_of_remove_table(dev); + + return ret; +} + +/* Initializes OPP tables based on old-deprecated bindings */ +static int _of_add_opp_table_v1(struct device *dev) +{ + const struct property *prop; + const __be32 *val; + int nr; + + prop = of_find_property(dev->of_node, "operating-points", NULL); + if (!prop) + return -ENODEV; + if (!prop->value) + return -ENODATA; + + /* + * Each OPP is a set of tuples consisting of frequency and + * voltage like <freq-kHz vol-uV>. + */ + nr = prop->length / sizeof(u32); + if (nr % 2) { + dev_err(dev, "%s: Invalid OPP table\n", __func__); + return -EINVAL; + } + + val = prop->value; + while (nr) { + unsigned long freq = be32_to_cpup(val++) * 1000; + unsigned long volt = be32_to_cpup(val++); + + if (_opp_add_v1(dev, freq, volt, false)) + dev_warn(dev, "%s: Failed to add OPP %ld\n", + __func__, freq); + nr -= 2; + } + + return 0; +} + +/** + * dev_pm_opp_of_add_table() - Initialize opp table from device tree + * @dev: device pointer used to lookup OPP table. + * + * Register the initial OPP table with the OPP library for given device. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -ENODEV when 'operating-points' property is not found or is invalid data + * in device node. + * -ENODATA when empty 'operating-points' property is found + * -EINVAL when invalid entries are found in opp-v2 table + */ +int dev_pm_opp_of_add_table(struct device *dev) +{ + struct device_node *opp_np; + int ret; + + /* + * OPPs have two version of bindings now. The older one is deprecated, + * try for the new binding first. + */ + opp_np = _of_get_opp_desc_node(dev); + if (!opp_np) { + /* + * Try old-deprecated bindings for backward compatibility with + * older dtbs. + */ + return _of_add_opp_table_v1(dev); + } + + ret = _of_add_opp_table_v2(dev, opp_np); + of_node_put(opp_np); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); + +/* CPU device specific helpers */ + +/** + * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be removed + * + * This removes the OPP tables for CPUs present in the @cpumask. + * This should be used only to remove static entries created from DT. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask) +{ + _dev_pm_opp_cpumask_remove_table(cpumask, true); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table); + +/** + * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be added. + * + * This adds the OPP tables for CPUs present in the @cpumask. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask) +{ + struct device *cpu_dev; + int cpu, ret = 0; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + ret = dev_pm_opp_of_add_table(cpu_dev); + if (ret) { + pr_err("%s: couldn't find opp table for cpu:%d, %d\n", + __func__, cpu, ret); + + /* Free all other OPPs */ + dev_pm_opp_of_cpumask_remove_table(cpumask); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); + +/* + * Works only for OPP v2 bindings. + * + * Returns -ENOENT if operating-points-v2 bindings aren't supported. + */ +/** + * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with + * @cpu_dev using operating-points-v2 + * bindings. + * + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask to update with information of sharing CPUs + * + * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. + * + * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev. + * + * Locking: The internal opp_table and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, + struct cpumask *cpumask) +{ + struct device_node *np, *tmp_np; + struct device *tcpu_dev; + int cpu, ret = 0; + + /* Get OPP descriptor node */ + np = _of_get_opp_desc_node(cpu_dev); + if (!np) { + dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__); + return -ENOENT; + } + + cpumask_set_cpu(cpu_dev->id, cpumask); + + /* OPPs are shared ? */ + if (!of_property_read_bool(np, "opp-shared")) + goto put_cpu_node; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) { + dev_err(cpu_dev, "%s: failed to get cpu%d device\n", + __func__, cpu); + ret = -ENODEV; + goto put_cpu_node; + } + + /* Get OPP descriptor node */ + tmp_np = _of_get_opp_desc_node(tcpu_dev); + if (!tmp_np) { + dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n", + __func__); + ret = -ENOENT; + goto put_cpu_node; + } + + /* CPUs are sharing opp node */ + if (np == tmp_np) + cpumask_set_cpu(cpu, cpumask); + + of_node_put(tmp_np); + } + +put_cpu_node: + of_node_put(np); + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus); diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index f67f806fcf3a..20f3be22e060 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -28,6 +28,8 @@ struct regulator; /* Lock to allow exclusive modification to the device and opp lists */ extern struct mutex opp_table_lock; +extern struct list_head opp_tables; + /* * Internal data structure organization with the OPP layer library is as * follows: @@ -183,6 +185,18 @@ struct opp_table { struct opp_table *_find_opp_table(struct device *dev); struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table); struct device_node *_of_get_opp_desc_node(struct device *dev); +void _dev_pm_opp_remove_table(struct device *dev, bool remove_all); +struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table); +int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table); +void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, bool notify); +int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, bool dynamic); +void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of); + +#ifdef CONFIG_OF +void _of_init_opp_table(struct opp_table *opp_table, struct device *dev); +#else +static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) {} +#endif #ifdef CONFIG_DEBUG_FS void opp_debug_remove_one(struct dev_pm_opp *opp); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 4c7055009bd6..b74690418504 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1506,11 +1506,16 @@ int pm_runtime_force_resume(struct device *dev) goto out; } - ret = callback(dev); + ret = pm_runtime_set_active(dev); if (ret) goto out; - pm_runtime_set_active(dev); + ret = callback(dev); + if (ret) { + pm_runtime_set_suspended(dev); + goto out; + } + pm_runtime_mark_last_busy(dev); out: pm_runtime_enable(dev); diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index a1e0b9ab847a..5fb7718f256c 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -246,6 +246,8 @@ static int device_wakeup_attach(struct device *dev, struct wakeup_source *ws) return -EEXIST; } dev->power.wakeup = ws; + if (dev->power.wakeirq) + device_wakeup_attach_irq(dev, dev->power.wakeirq); spin_unlock_irq(&dev->power.lock); return 0; } |