diff options
Diffstat (limited to 'drivers/bcma/driver_chipcommon_pmu.c')
| -rw-r--r-- | drivers/bcma/driver_chipcommon_pmu.c | 153 |
1 files changed, 152 insertions, 1 deletions
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c index fcc63db0ce75..4bc10aa57bd4 100644 --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -11,6 +11,13 @@ #include "bcma_private.h" #include <linux/bcma/bcma.h> +static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ + bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); + return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); +} + static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set) { @@ -83,6 +90,24 @@ void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) } } +/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) +{ + struct bcma_bus *bus = cc->core->bus; + u32 val; + + val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); + if (enable) { + val |= BCMA_CHIPCTL_4331_EXTPA_EN; + if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) + val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; + } else { + val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; + val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; + } + bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); +} + void bcma_pmu_workarounds(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; @@ -92,7 +117,7 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc) bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); break; case 0x4331: - pr_err("Enabling Ext PA lines not implemented\n"); + /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ break; case 43224: if (bus->chipinfo.rev == 0) { @@ -136,3 +161,129 @@ void bcma_pmu_init(struct bcma_drv_cc *cc) bcma_pmu_swreg_init(cc); bcma_pmu_workarounds(cc); } + +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4716: + case 0x4748: + case 47162: + case 0x4313: + case 0x5357: + case 0x4749: + case 53572: + /* always 20Mhz */ + return 20000 * 1000; + case 0x5356: + case 0x5300: + /* always 25Mhz */ + return 25000 * 1000; + default: + pr_warn("No ALP clock specified for %04X device, " + "pmu rev. %d, using default %d Hz\n", + bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); + } + return BCMA_CC_PMU_ALP_CLOCK; +} + +/* Find the output of the "m" pll divider given pll controls that start with + * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. + */ +static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) +{ + u32 tmp, div, ndiv, p1, p2, fc; + struct bcma_bus *bus = cc->core->bus; + + BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); + + BUG_ON(!m || m > 4); + + if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { + /* Detect failure in clock setting */ + tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + if (tmp & 0x40000) + return 133 * 1000000; + } + + tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); + p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; + p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; + + tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); + div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & + BCMA_CC_PPL_MDIV_MASK; + + tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); + ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; + + /* Do calculation in Mhz */ + fc = bcma_pmu_alp_clock(cc) / 1000000; + fc = (p1 * ndiv * fc) / p2; + + /* Return clock in Hertz */ + return (fc / div) * 1000000; +} + +/* query bus clock frequency for PMU-enabled chipcommon */ +u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4716: + case 0x4748: + case 47162: + return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 0x5356: + return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 0x5357: + case 0x4749: + return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 0x5300: + return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 53572: + return 75000000; + default: + pr_warn("No backplane clock specified for %04X device, " + "pmu rev. %d, using default %d Hz\n", + bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); + } + return BCMA_CC_PMU_HT_CLOCK; +} + +/* query cpu clock frequency for PMU-enabled chipcommon */ +u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + if (bus->chipinfo.id == 53572) + return 300000000; + + if (cc->pmu.rev >= 5) { + u32 pll; + switch (bus->chipinfo.id) { + case 0x5356: + pll = BCMA_CC_PMU5356_MAINPLL_PLL0; + break; + case 0x5357: + case 0x4749: + pll = BCMA_CC_PMU5357_MAINPLL_PLL0; + break; + default: + pll = BCMA_CC_PMU4716_MAINPLL_PLL0; + break; + } + + /* TODO: if (bus->chipinfo.id == 0x5300) + return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ + return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); + } + + return bcma_pmu_get_clockcontrol(cc); +} |