diff options
Diffstat (limited to 'drivers/block/cciss.h')
| -rw-r--r-- | drivers/block/cciss.h | 433 |
1 files changed, 0 insertions, 433 deletions
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h deleted file mode 100644 index 24b5fd75501a..000000000000 --- a/drivers/block/cciss.h +++ /dev/null @@ -1,433 +0,0 @@ -#ifndef CCISS_H -#define CCISS_H - -#include <linux/genhd.h> -#include <linux/mutex.h> - -#include "cciss_cmd.h" - - -#define NWD_SHIFT 4 -#define MAX_PART (1 << NWD_SHIFT) - -#define IO_OK 0 -#define IO_ERROR 1 -#define IO_NEEDS_RETRY 3 - -#define VENDOR_LEN 8 -#define MODEL_LEN 16 -#define REV_LEN 4 - -struct ctlr_info; -typedef struct ctlr_info ctlr_info_t; - -struct access_method { - void (*submit_command)(ctlr_info_t *h, CommandList_struct *c); - void (*set_intr_mask)(ctlr_info_t *h, unsigned long val); - unsigned long (*fifo_full)(ctlr_info_t *h); - bool (*intr_pending)(ctlr_info_t *h); - unsigned long (*command_completed)(ctlr_info_t *h); -}; -typedef struct _drive_info_struct -{ - unsigned char LunID[8]; - int usage_count; - struct request_queue *queue; - sector_t nr_blocks; - int block_size; - int heads; - int sectors; - int cylinders; - int raid_level; /* set to -1 to indicate that - * the drive is not in use/configured - */ - int busy_configuring; /* This is set when a drive is being removed - * to prevent it from being opened or it's - * queue from being started. - */ - struct device dev; - __u8 serial_no[16]; /* from inquiry page 0x83, - * not necc. null terminated. - */ - char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */ - char model[MODEL_LEN + 1]; /* SCSI model string */ - char rev[REV_LEN + 1]; /* SCSI revision string */ - char device_initialized; /* indicates whether dev is initialized */ -} drive_info_struct; - -struct ctlr_info -{ - int ctlr; - char devname[8]; - char *product_name; - char firm_ver[4]; /* Firmware version */ - struct pci_dev *pdev; - __u32 board_id; - void __iomem *vaddr; - unsigned long paddr; - int nr_cmds; /* Number of commands allowed on this controller */ - CfgTable_struct __iomem *cfgtable; - int interrupts_enabled; - int major; - int max_commands; - int commands_outstanding; - int max_outstanding; /* Debug */ - int num_luns; - int highest_lun; - int usage_count; /* number of opens all all minor devices */ - /* Need space for temp sg list - * number of scatter/gathers supported - * number of scatter/gathers in chained block - */ - struct scatterlist **scatter_list; - int maxsgentries; - int chainsize; - int max_cmd_sgentries; - SGDescriptor_struct **cmd_sg_list; - -# define PERF_MODE_INT 0 -# define DOORBELL_INT 1 -# define SIMPLE_MODE_INT 2 -# define MEMQ_MODE_INT 3 - unsigned int intr[4]; - int intr_mode; - int cciss_max_sectors; - BYTE cciss_read; - BYTE cciss_write; - BYTE cciss_read_capacity; - - /* information about each logical volume */ - drive_info_struct *drv[CISS_MAX_LUN]; - - struct access_method access; - - /* queue and queue Info */ - struct list_head reqQ; - struct list_head cmpQ; - unsigned int Qdepth; - unsigned int maxQsinceinit; - unsigned int maxSG; - spinlock_t lock; - - /* pointers to command and error info pool */ - CommandList_struct *cmd_pool; - dma_addr_t cmd_pool_dhandle; - ErrorInfo_struct *errinfo_pool; - dma_addr_t errinfo_pool_dhandle; - unsigned long *cmd_pool_bits; - int nr_allocs; - int nr_frees; - int busy_configuring; - int busy_initializing; - int busy_scanning; - struct mutex busy_shutting_down; - - /* This element holds the zero based queue number of the last - * queue to be started. It is used for fairness. - */ - int next_to_run; - - /* Disk structures we need to pass back */ - struct gendisk *gendisk[CISS_MAX_LUN]; -#ifdef CONFIG_CISS_SCSI_TAPE - struct cciss_scsi_adapter_data_t *scsi_ctlr; -#endif - unsigned char alive; - struct list_head scan_list; - struct completion scan_wait; - struct device dev; - /* - * Performant mode tables. - */ - u32 trans_support; - u32 trans_offset; - struct TransTable_struct *transtable; - unsigned long transMethod; - - /* - * Performant mode completion buffer - */ - u64 *reply_pool; - dma_addr_t reply_pool_dhandle; - u64 *reply_pool_head; - size_t reply_pool_size; - unsigned char reply_pool_wraparound; - u32 *blockFetchTable; -}; - -/* Defining the diffent access_methods - * - * Memory mapped FIFO interface (SMART 53xx cards) - */ -#define SA5_DOORBELL 0x20 -#define SA5_REQUEST_PORT_OFFSET 0x40 -#define SA5_REPLY_INTR_MASK_OFFSET 0x34 -#define SA5_REPLY_PORT_OFFSET 0x44 -#define SA5_INTR_STATUS 0x30 -#define SA5_SCRATCHPAD_OFFSET 0xB0 - -#define SA5_CTCFG_OFFSET 0xB4 -#define SA5_CTMEM_OFFSET 0xB8 - -#define SA5_INTR_OFF 0x08 -#define SA5B_INTR_OFF 0x04 -#define SA5_INTR_PENDING 0x08 -#define SA5B_INTR_PENDING 0x04 -#define FIFO_EMPTY 0xffffffff -#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ -/* Perf. mode flags */ -#define SA5_PERF_INTR_PENDING 0x04 -#define SA5_PERF_INTR_OFF 0x05 -#define SA5_OUTDB_STATUS_PERF_BIT 0x01 -#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 -#define SA5_OUTDB_CLEAR 0xA0 -#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 -#define SA5_OUTDB_STATUS 0x9C - - -#define CISS_ERROR_BIT 0x02 - -#define CCISS_INTR_ON 1 -#define CCISS_INTR_OFF 0 - - -/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board - * to become ready, in seconds, before giving up on it. - * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait - * between polling the board to see if it is ready, in - * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived - * the above. - */ -#define CCISS_BOARD_READY_WAIT_SECS (120) -#define CCISS_BOARD_NOT_READY_WAIT_SECS (100) -#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100) -#define CCISS_BOARD_READY_ITERATIONS \ - ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \ - CCISS_BOARD_READY_POLL_INTERVAL_MSECS) -#define CCISS_BOARD_NOT_READY_ITERATIONS \ - ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \ - CCISS_BOARD_READY_POLL_INTERVAL_MSECS) -#define CCISS_POST_RESET_PAUSE_MSECS (3000) -#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (4000) -#define CCISS_POST_RESET_NOOP_RETRIES (12) -#define CCISS_POST_RESET_NOOP_TIMEOUT_MSECS (10000) - -/* - Send the command to the hardware -*/ -static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c) -{ -#ifdef CCISS_DEBUG - printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n", - h->ctlr, c->busaddr); -#endif /* CCISS_DEBUG */ - writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); - readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); - h->commands_outstanding++; - if ( h->commands_outstanding > h->max_outstanding) - h->max_outstanding = h->commands_outstanding; -} - -/* - * This card is the opposite of the other cards. - * 0 turns interrupts on... - * 0x08 turns them off... - */ -static void SA5_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) - { /* Turn interrupts on */ - h->interrupts_enabled = 1; - writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } else /* Turn them off */ - { - h->interrupts_enabled = 0; - writel( SA5_INTR_OFF, - h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } -} -/* - * This card is the opposite of the other cards. - * 0 turns interrupts on... - * 0x04 turns them off... - */ -static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) - { /* Turn interrupts on */ - h->interrupts_enabled = 1; - writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } else /* Turn them off */ - { - h->interrupts_enabled = 0; - writel( SA5B_INTR_OFF, - h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } -} - -/* Performant mode intr_mask */ -static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val) -{ - if (val) { /* turn on interrupts */ - h->interrupts_enabled = 1; - writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } else { - h->interrupts_enabled = 0; - writel(SA5_PERF_INTR_OFF, - h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); - } -} - -/* - * Returns true if fifo is full. - * - */ -static unsigned long SA5_fifo_full(ctlr_info_t *h) -{ - if( h->commands_outstanding >= h->max_commands) - return(1); - else - return(0); - -} -/* - * returns value read from hardware. - * returns FIFO_EMPTY if there is nothing to read - */ -static unsigned long SA5_completed(ctlr_info_t *h) -{ - unsigned long register_value - = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); - if(register_value != FIFO_EMPTY) - { - h->commands_outstanding--; -#ifdef CCISS_DEBUG - printk("cciss: Read %lx back from board\n", register_value); -#endif /* CCISS_DEBUG */ - } -#ifdef CCISS_DEBUG - else - { - printk("cciss: FIFO Empty read\n"); - } -#endif - return ( register_value); - -} - -/* Performant mode command completed */ -static unsigned long SA5_performant_completed(ctlr_info_t *h) -{ - unsigned long register_value = FIFO_EMPTY; - - /* flush the controller write of the reply queue by reading - * outbound doorbell status register. - */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); - /* msi auto clears the interrupt pending bit. */ - if (!(h->pdev->msi_enabled || h->pdev->msix_enabled)) { - writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); - /* Do a read in order to flush the write to the controller - * (as per spec.) - */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); - } - - if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { - register_value = *(h->reply_pool_head); - (h->reply_pool_head)++; - h->commands_outstanding--; - } else { - register_value = FIFO_EMPTY; - } - /* Check for wraparound */ - if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { - h->reply_pool_head = h->reply_pool; - h->reply_pool_wraparound ^= 1; - } - - return register_value; -} -/* - * Returns true if an interrupt is pending.. - */ -static bool SA5_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = - readl(h->vaddr + SA5_INTR_STATUS); -#ifdef CCISS_DEBUG - printk("cciss: intr_pending %lx\n", register_value); -#endif /* CCISS_DEBUG */ - if( register_value & SA5_INTR_PENDING) - return 1; - return 0 ; -} - -/* - * Returns true if an interrupt is pending.. - */ -static bool SA5B_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = - readl(h->vaddr + SA5_INTR_STATUS); -#ifdef CCISS_DEBUG - printk("cciss: intr_pending %lx\n", register_value); -#endif /* CCISS_DEBUG */ - if( register_value & SA5B_INTR_PENDING) - return 1; - return 0 ; -} - -static bool SA5_performant_intr_pending(ctlr_info_t *h) -{ - unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); - - if (!register_value) - return false; - - if (h->pdev->msi_enabled || h->pdev->msix_enabled) - return true; - - /* Read outbound doorbell to flush */ - register_value = readl(h->vaddr + SA5_OUTDB_STATUS); - return register_value & SA5_OUTDB_STATUS_PERF_BIT; -} - -static struct access_method SA5_access = { - .submit_command = SA5_submit_command, - .set_intr_mask = SA5_intr_mask, - .fifo_full = SA5_fifo_full, - .intr_pending = SA5_intr_pending, - .command_completed = SA5_completed, -}; - -static struct access_method SA5B_access = { - .submit_command = SA5_submit_command, - .set_intr_mask = SA5B_intr_mask, - .fifo_full = SA5_fifo_full, - .intr_pending = SA5B_intr_pending, - .command_completed = SA5_completed, -}; - -static struct access_method SA5_performant_access = { - .submit_command = SA5_submit_command, - .set_intr_mask = SA5_performant_intr_mask, - .fifo_full = SA5_fifo_full, - .intr_pending = SA5_performant_intr_pending, - .command_completed = SA5_performant_completed, -}; - -struct board_type { - __u32 board_id; - char *product_name; - struct access_method *access; - int nr_cmds; /* Max cmds this kind of ctlr can handle. */ -}; - -#endif /* CCISS_H */ |