diff options
Diffstat (limited to 'drivers/bluetooth/btusb.c')
| -rw-r--r-- | drivers/bluetooth/btusb.c | 57 |
1 files changed, 34 insertions, 23 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a9c35ebb30f8..70e385987d41 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1200,7 +1200,7 @@ static int btusb_open(struct hci_dev *hdev) if (data->setup_on_usb) { err = data->setup_on_usb(hdev); if (err < 0) - return err; + goto setup_fail; } data->intf->needs_remote_wakeup = 1; @@ -1239,6 +1239,7 @@ done: failed: clear_bit(BTUSB_INTR_RUNNING, &data->flags); +setup_fail: usb_autopm_put_interface(data->intf); return err; } @@ -2182,8 +2183,11 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) * loaded. */ err = btintel_read_version(hdev, &ver); - if (err) + if (err) { + bt_dev_err(hdev, "Intel Read version failed (%d)", err); + btintel_reset_to_bootloader(hdev); return err; + } /* The hardware platform number has a fixed value of 0x37 and * for now only accept this single value. @@ -2326,9 +2330,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) /* Start firmware downloading and get boot parameter */ err = btintel_download_firmware(hdev, fw, &boot_param); - if (err < 0) + if (err < 0) { + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); goto done; - + } set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); bt_dev_info(hdev, "Waiting for firmware download to complete"); @@ -2355,6 +2363,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) if (err) { bt_dev_err(hdev, "Firmware loading timeout"); err = -ETIMEDOUT; + btintel_reset_to_bootloader(hdev); goto done; } @@ -2381,8 +2390,11 @@ done: set_bit(BTUSB_BOOTING, &data->flags); err = btintel_send_intel_reset(hdev, boot_param); - if (err) + if (err) { + bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); + btintel_reset_to_bootloader(hdev); return err; + } /* The bootloader will not indicate when the device is ready. This * is done by the operational firmware sending bootup notification. @@ -2404,6 +2416,7 @@ done: if (err) { bt_dev_err(hdev, "Device boot timeout"); + btintel_reset_to_bootloader(hdev); return -ETIMEDOUT; } @@ -2432,6 +2445,13 @@ done: */ btintel_set_event_mask(hdev, false); + /* Read the Intel version information after loading the FW */ + err = btintel_read_version(hdev, &ver); + if (err) + return err; + + btintel_version_info(hdev, &ver); + return 0; } @@ -2489,8 +2509,6 @@ static int btusb_shutdown_intel_new(struct hci_dev *hdev) return 0; } -#ifdef CONFIG_BT_HCIBTUSB_MTK - #define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin" #define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" @@ -3051,7 +3069,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev) MODULE_FIRMWARE(FIRMWARE_MT7663); MODULE_FIRMWARE(FIRMWARE_MT7668); -#endif #ifdef CONFIG_PM /* Configure an out-of-band gpio as wake-up pin, if specified in device tree */ @@ -3411,7 +3428,6 @@ static int btusb_setup_qca(struct hci_dev *hdev) return 0; } -#ifdef CONFIG_BT_HCIBTUSB_BCM static inline int __set_diag_interface(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); @@ -3498,7 +3514,6 @@ static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable) return submit_or_queue_tx_urb(hdev, urb); } -#endif #ifdef CONFIG_PM static irqreturn_t btusb_oob_wake_handler(int irq, void *priv) @@ -3724,8 +3739,8 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; -#ifdef CONFIG_BT_HCIBTUSB_BCM - if (id->driver_info & BTUSB_BCM_PATCHRAM) { + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && + (id->driver_info & BTUSB_BCM_PATCHRAM)) { hdev->manufacturer = 15; hdev->setup = btbcm_setup_patchram; hdev->set_diag = btusb_bcm_set_diag; @@ -3735,7 +3750,8 @@ static int btusb_probe(struct usb_interface *intf, data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2); } - if (id->driver_info & BTUSB_BCM_APPLE) { + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && + (id->driver_info & BTUSB_BCM_APPLE)) { hdev->manufacturer = 15; hdev->setup = btbcm_setup_apple; hdev->set_diag = btusb_bcm_set_diag; @@ -3743,7 +3759,6 @@ static int btusb_probe(struct usb_interface *intf, /* Broadcom LM_DIAG Interface numbers are hardcoded */ data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2); } -#endif if (id->driver_info & BTUSB_INTEL) { hdev->manufacturer = 2; @@ -3774,14 +3789,13 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; -#ifdef CONFIG_BT_HCIBTUSB_MTK - if (id->driver_info & BTUSB_MEDIATEK) { + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) && + (id->driver_info & BTUSB_MEDIATEK)) { hdev->setup = btusb_mtk_setup; hdev->shutdown = btusb_mtk_shutdown; hdev->manufacturer = 70; set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); } -#endif if (id->driver_info & BTUSB_SWAVE) { set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks); @@ -3807,8 +3821,8 @@ static int btusb_probe(struct usb_interface *intf, btusb_check_needs_reset_resume(intf); } -#ifdef CONFIG_BT_HCIBTUSB_RTL - if (id->driver_info & BTUSB_REALTEK) { + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) && + (id->driver_info & BTUSB_REALTEK)) { hdev->setup = btrtl_setup_realtek; hdev->shutdown = btrtl_shutdown_realtek; hdev->cmd_timeout = btusb_rtl_cmd_timeout; @@ -3819,7 +3833,6 @@ static int btusb_probe(struct usb_interface *intf, */ set_bit(BTUSB_WAKEUP_DISABLE, &data->flags); } -#endif if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ @@ -3887,15 +3900,13 @@ static int btusb_probe(struct usb_interface *intf, goto out_free_dev; } -#ifdef CONFIG_BT_HCIBTUSB_BCM - if (data->diag) { + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) { if (!usb_driver_claim_interface(&btusb_driver, data->diag, data)) __set_diag_interface(hdev); else data->diag = NULL; } -#endif if (enable_autosuspend) usb_enable_autosuspend(data->udev); |