diff options
Diffstat (limited to 'drivers/bus/fsl-mc/fsl-mc-bus.c')
| -rw-r--r-- | drivers/bus/fsl-mc/fsl-mc-bus.c | 138 |
1 files changed, 120 insertions, 18 deletions
diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c b/drivers/bus/fsl-mc/fsl-mc-bus.c index 09c8ab5e0959..8fd4a356a86e 100644 --- a/drivers/bus/fsl-mc/fsl-mc-bus.c +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c @@ -63,11 +63,14 @@ struct fsl_mc_addr_translation_range { #define FSL_MC_GCR1 0x0 #define GCR1_P1_STOP BIT(31) +#define GCR1_P2_STOP BIT(30) #define FSL_MC_FAPR 0x28 #define MC_FAPR_PL BIT(18) #define MC_FAPR_BMT BIT(17) +static phys_addr_t mc_portal_base_phys_addr; + /** * fsl_mc_bus_match - device to driver matching callback * @dev: the fsl-mc device to match against @@ -220,7 +223,7 @@ static int scan_fsl_mc_bus(struct device *dev, void *data) root_mc_dev = to_fsl_mc_device(dev); root_mc_bus = to_fsl_mc_bus(root_mc_dev); mutex_lock(&root_mc_bus->scan_mutex); - dprc_scan_objects(root_mc_dev, NULL); + dprc_scan_objects(root_mc_dev, false); mutex_unlock(&root_mc_bus->scan_mutex); exit: @@ -703,14 +706,30 @@ static int fsl_mc_device_get_mmio_regions(struct fsl_mc_device *mc_dev, * If base address is in the region_desc use it otherwise * revert to old mechanism */ - if (region_desc.base_address) + if (region_desc.base_address) { regions[i].start = region_desc.base_address + region_desc.base_offset; - else + } else { error = translate_mc_addr(mc_dev, mc_region_type, region_desc.base_offset, ®ions[i].start); + /* + * Some versions of the MC firmware wrongly report + * 0 for register base address of the DPMCP associated + * with child DPRC objects thus rendering them unusable. + * This is particularly troublesome in ACPI boot + * scenarios where the legacy way of extracting this + * base address from the device tree does not apply. + * Given that DPMCPs share the same base address, + * workaround this by using the base address extracted + * from the root DPRC container. + */ + if (is_fsl_mc_bus_dprc(mc_dev) && + regions[i].start == region_desc.base_offset) + regions[i].start += mc_portal_base_phys_addr; + } + if (error < 0) { dev_err(parent_dev, "Invalid MC offset: %#x (for %s.%d\'s region %d)\n", @@ -895,6 +914,8 @@ error_cleanup_dev: } EXPORT_SYMBOL_GPL(fsl_mc_device_add); +static struct notifier_block fsl_mc_nb; + /** * fsl_mc_device_remove - Remove an fsl-mc device from being visible to * Linux @@ -914,7 +935,8 @@ void fsl_mc_device_remove(struct fsl_mc_device *mc_dev) } EXPORT_SYMBOL_GPL(fsl_mc_device_remove); -struct fsl_mc_device *fsl_mc_get_endpoint(struct fsl_mc_device *mc_dev) +struct fsl_mc_device *fsl_mc_get_endpoint(struct fsl_mc_device *mc_dev, + u16 if_id) { struct fsl_mc_device *mc_bus_dev, *endpoint; struct fsl_mc_obj_desc endpoint_desc = {{ 0 }}; @@ -925,6 +947,7 @@ struct fsl_mc_device *fsl_mc_get_endpoint(struct fsl_mc_device *mc_dev) mc_bus_dev = to_fsl_mc_device(mc_dev->dev.parent); strcpy(endpoint1.type, mc_dev->obj_desc.type); endpoint1.id = mc_dev->obj_desc.id; + endpoint1.if_id = if_id; err = dprc_get_connection(mc_bus_dev->mc_io, 0, mc_bus_dev->mc_handle, @@ -947,10 +970,28 @@ struct fsl_mc_device *fsl_mc_get_endpoint(struct fsl_mc_device *mc_dev) * We know that the device has an endpoint because we verified by * interrogating the firmware. This is the case when the device was not * yet discovered by the fsl-mc bus, thus the lookup returned NULL. - * Differentiate this case by returning EPROBE_DEFER. + * Force a rescan of the devices in this container and retry the lookup. + */ + if (!endpoint) { + struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_bus_dev); + + if (mutex_trylock(&mc_bus->scan_mutex)) { + err = dprc_scan_objects(mc_bus_dev, true); + mutex_unlock(&mc_bus->scan_mutex); + } + + if (err < 0) + return ERR_PTR(err); + } + + endpoint = fsl_mc_device_lookup(&endpoint_desc, mc_bus_dev); + /* + * This means that the endpoint might reside in a different isolation + * context (DPRC/container). Not much to do, so return a permssion + * error. */ if (!endpoint) - return ERR_PTR(-EPROBE_DEFER); + return ERR_PTR(-EPERM); return endpoint; } @@ -1089,17 +1130,6 @@ static int fsl_mc_bus_probe(struct platform_device *pdev) } if (mc->fsl_mc_regs) { - /* - * Some bootloaders pause the MC firmware before booting the - * kernel so that MC will not cause faults as soon as the - * SMMU probes due to the fact that there's no configuration - * in place for MC. - * At this point MC should have all its SMMU setup done so make - * sure it is resumed. - */ - writel(readl(mc->fsl_mc_regs + FSL_MC_GCR1) & (~GCR1_P1_STOP), - mc->fsl_mc_regs + FSL_MC_GCR1); - if (IS_ENABLED(CONFIG_ACPI) && !dev_of_node(&pdev->dev)) { mc_stream_id = readl(mc->fsl_mc_regs + FSL_MC_FAPR); /* @@ -1113,11 +1143,25 @@ static int fsl_mc_bus_probe(struct platform_device *pdev) error = acpi_dma_configure_id(&pdev->dev, DEV_DMA_COHERENT, &mc_stream_id); + if (error == -EPROBE_DEFER) + return error; if (error) dev_warn(&pdev->dev, "failed to configure dma: %d.\n", error); } + + /* + * Some bootloaders pause the MC firmware before booting the + * kernel so that MC will not cause faults as soon as the + * SMMU probes due to the fact that there's no configuration + * in place for MC. + * At this point MC should have all its SMMU setup done so make + * sure it is resumed. + */ + writel(readl(mc->fsl_mc_regs + FSL_MC_GCR1) & + (~(GCR1_P1_STOP | GCR1_P2_STOP)), + mc->fsl_mc_regs + FSL_MC_GCR1); } /* @@ -1126,6 +1170,8 @@ static int fsl_mc_bus_probe(struct platform_device *pdev) plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mc_portal_phys_addr = plat_res->start; mc_portal_size = resource_size(plat_res); + mc_portal_base_phys_addr = mc_portal_phys_addr & ~0x3ffffff; + error = fsl_create_mc_io(&pdev->dev, mc_portal_phys_addr, mc_portal_size, NULL, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, &mc_io); @@ -1199,9 +1245,26 @@ static int fsl_mc_bus_remove(struct platform_device *pdev) fsl_destroy_mc_io(mc->root_mc_bus_dev->mc_io); mc->root_mc_bus_dev->mc_io = NULL; + bus_unregister_notifier(&fsl_mc_bus_type, &fsl_mc_nb); + + if (mc->fsl_mc_regs) { + /* + * Pause the MC firmware so that it doesn't crash in certain + * scenarios, such as kexec. + */ + writel(readl(mc->fsl_mc_regs + FSL_MC_GCR1) | + (GCR1_P1_STOP | GCR1_P2_STOP), + mc->fsl_mc_regs + FSL_MC_GCR1); + } + return 0; } +static void fsl_mc_bus_shutdown(struct platform_device *pdev) +{ + fsl_mc_bus_remove(pdev); +} + static const struct of_device_id fsl_mc_bus_match_table[] = { {.compatible = "fsl,qoriq-mc",}, {}, @@ -1224,6 +1287,45 @@ static struct platform_driver fsl_mc_bus_driver = { }, .probe = fsl_mc_bus_probe, .remove = fsl_mc_bus_remove, + .shutdown = fsl_mc_bus_shutdown, +}; + +static int fsl_mc_bus_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct resource *res; + void __iomem *fsl_mc_regs; + + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + if (!of_match_device(fsl_mc_bus_match_table, dev) && + !acpi_match_device(fsl_mc_bus_acpi_match_table, dev)) + return 0; + + res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 1); + if (!res) + return 0; + + fsl_mc_regs = ioremap(res->start, resource_size(res)); + if (!fsl_mc_regs) + return 0; + + /* + * Make sure that the MC firmware is paused before the IOMMU setup for + * it is done or otherwise the firmware will crash right after the SMMU + * gets probed and enabled. + */ + writel(readl(fsl_mc_regs + FSL_MC_GCR1) | (GCR1_P1_STOP | GCR1_P2_STOP), + fsl_mc_regs + FSL_MC_GCR1); + iounmap(fsl_mc_regs); + + return 0; +} + +static struct notifier_block fsl_mc_nb = { + .notifier_call = fsl_mc_bus_notifier, }; static int __init fsl_mc_bus_driver_init(void) @@ -1250,7 +1352,7 @@ static int __init fsl_mc_bus_driver_init(void) if (error < 0) goto error_cleanup_dprc_driver; - return 0; + return bus_register_notifier(&platform_bus_type, &fsl_mc_nb); error_cleanup_dprc_driver: dprc_driver_exit(); |