aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/Kconfig15
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/agp/intel-agp.c1
-rw-r--r--drivers/char/agp/intel-gtt.c10
-rw-r--r--drivers/char/briq_panel.c266
-rw-r--r--drivers/char/hw_random/nomadik-rng.c13
-rw-r--r--drivers/char/hw_random/omap-rng.c2
-rw-r--r--drivers/char/hw_random/tx4939-rng.c5
-rw-r--r--drivers/char/ipmi/ipmi_watchdog.c4
-rw-r--r--drivers/char/nvram.c2
-rw-r--r--drivers/char/pcmcia/synclink_cs.c3
-rw-r--r--drivers/char/ramoops.c1
-rw-r--r--drivers/char/rtc.c4
-rw-r--r--drivers/char/tlclk.c2
-rw-r--r--drivers/char/tpm/Kconfig1
-rw-r--r--drivers/char/tpm/tpm.c3
-rw-r--r--drivers/char/tpm/tpm.h2
-rw-r--r--drivers/char/tpm/tpm_tis.c27
-rw-r--r--drivers/char/ttyprintk.c2
-rw-r--r--drivers/char/viotape.c1041
20 files changed, 36 insertions, 1369 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43643033a3ae..ee946865d6cb 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,21 +66,6 @@ config TTY_PRINTK
If unsure, say N.
-config BRIQ_PANEL
- tristate 'Total Impact briQ front panel driver'
- depends on PPC_CHRP
- ---help---
- The briQ is a small footprint CHRP computer with a frontpanel VFD, a
- tristate led and two switches. It is the size of a CDROM drive.
-
- If you have such one and want anything showing on the VFD then you
- must answer Y here.
-
- To compile this driver as a module, choose M here: the
- module will be called briq_panel.
-
- It's safe to say N here.
-
config BFIN_OTP
tristate "Blackfin On-Chip OTP Memory Support"
depends on BLACKFIN && (BF51x || BF52x || BF54x)
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 32762ba769c2..0dc5d7ce4864 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_IBM_BSR) += bsr.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
-obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
obj-$(CONFIG_BFIN_OTP) += bfin-otp.o
obj-$(CONFIG_PRINTER) += lp.o
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index b427711be4be..962e75dc4781 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -850,6 +850,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
}
+ ID(PCI_DEVICE_ID_INTEL_82441), /* for HAS2 support */
ID(PCI_DEVICE_ID_INTEL_82443LX_0),
ID(PCI_DEVICE_ID_INTEL_82443BX_0),
ID(PCI_DEVICE_ID_INTEL_82443GX_0),
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index c92424ca1a55..5cf47ac2d401 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -76,7 +76,6 @@ static struct _intel_private {
struct resource ifp_resource;
int resource_valid;
struct page *scratch_page;
- dma_addr_t scratch_page_dma;
} intel_private;
#define INTEL_GTT_GEN intel_private.driver->gen
@@ -306,9 +305,9 @@ static int intel_gtt_setup_scratch_page(void)
if (pci_dma_mapping_error(intel_private.pcidev, dma_addr))
return -EINVAL;
- intel_private.scratch_page_dma = dma_addr;
+ intel_private.base.scratch_page_dma = dma_addr;
} else
- intel_private.scratch_page_dma = page_to_phys(page);
+ intel_private.base.scratch_page_dma = page_to_phys(page);
intel_private.scratch_page = page;
@@ -631,7 +630,7 @@ static unsigned int intel_gtt_mappable_entries(void)
static void intel_gtt_teardown_scratch_page(void)
{
set_pages_wb(intel_private.scratch_page, 1);
- pci_unmap_page(intel_private.pcidev, intel_private.scratch_page_dma,
+ pci_unmap_page(intel_private.pcidev, intel_private.base.scratch_page_dma,
PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
put_page(intel_private.scratch_page);
__free_page(intel_private.scratch_page);
@@ -681,6 +680,7 @@ static int intel_gtt_init(void)
iounmap(intel_private.registers);
return -ENOMEM;
}
+ intel_private.base.gtt = intel_private.gtt;
global_cache_flush(); /* FIXME: ? */
@@ -975,7 +975,7 @@ void intel_gtt_clear_range(unsigned int first_entry, unsigned int num_entries)
unsigned int i;
for (i = first_entry; i < (first_entry + num_entries); i++) {
- intel_private.driver->write_entry(intel_private.scratch_page_dma,
+ intel_private.driver->write_entry(intel_private.base.scratch_page_dma,
i, 0);
}
readl(intel_private.gtt+i-1);
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
deleted file mode 100644
index 095ab90535ce..000000000000
--- a/drivers/char/briq_panel.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Drivers for the Total Impact PPC based computer "BRIQ"
- * by Dr. Karsten Jeppesen
- *
- */
-
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#define BRIQ_PANEL_MINOR 156
-#define BRIQ_PANEL_VFD_IOPORT 0x0390
-#define BRIQ_PANEL_LED_IOPORT 0x0398
-#define BRIQ_PANEL_VER "1.1 (04/20/2002)"
-#define BRIQ_PANEL_MSG0 "Loading Linux"
-
-static int vfd_is_open;
-static unsigned char vfd[40];
-static int vfd_cursor;
-static unsigned char ledpb, led;
-
-static void update_vfd(void)
-{
- int i;
-
- /* cursor home */
- outb(0x02, BRIQ_PANEL_VFD_IOPORT);
- for (i=0; i<20; i++)
- outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
- /* cursor to next line */
- outb(0xc0, BRIQ_PANEL_VFD_IOPORT);
- for (i=20; i<40; i++)
- outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-}
-
-static void set_led(char state)
-{
- if (state == 'R')
- led = 0x01;
- else if (state == 'G')
- led = 0x02;
- else if (state == 'Y')
- led = 0x03;
- else if (state == 'X')
- led = 0x00;
- outb(led, BRIQ_PANEL_LED_IOPORT);
-}
-
-static int briq_panel_open(struct inode *ino, struct file *filep)
-{
- tty_lock();
- /* enforce single access, vfd_is_open is protected by BKL */
- if (vfd_is_open) {
- tty_unlock();
- return -EBUSY;
- }
- vfd_is_open = 1;
-
- tty_unlock();
- return 0;
-}
-
-static int briq_panel_release(struct inode *ino, struct file *filep)
-{
- if (!vfd_is_open)
- return -ENODEV;
-
- vfd_is_open = 0;
-
- return 0;
-}
-
-static ssize_t briq_panel_read(struct file *file, char __user *buf, size_t count,
- loff_t *ppos)
-{
- unsigned short c;
- unsigned char cp;
-
- if (!vfd_is_open)
- return -ENODEV;
-
- c = (inb(BRIQ_PANEL_LED_IOPORT) & 0x000c) | (ledpb & 0x0003);
- set_led(' ');
- /* upper button released */
- if ((!(ledpb & 0x0004)) && (c & 0x0004)) {
- cp = ' ';
- ledpb = c;
- if (copy_to_user(buf, &cp, 1))
- return -EFAULT;
- return 1;
- }
- /* lower button released */
- else if ((!(ledpb & 0x0008)) && (c & 0x0008)) {
- cp = '\r';
- ledpb = c;
- if (copy_to_user(buf, &cp, 1))
- return -EFAULT;
- return 1;
- } else {
- ledpb = c;
- return 0;
- }
-}
-
-static void scroll_vfd( void )
-{
- int i;
-
- for (i=0; i<20; i++) {
- vfd[i] = vfd[i+20];
- vfd[i+20] = ' ';
- }
- vfd_cursor = 20;
-}
-
-static ssize_t briq_panel_write(struct file *file, const char __user *buf, size_t len,
- loff_t *ppos)
-{
- size_t indx = len;
- int i, esc = 0;
-
- if (!vfd_is_open)
- return -EBUSY;
-
- for (;;) {
- char c;
- if (!indx)
- break;
- if (get_user(c, buf))
- return -EFAULT;
- if (esc) {
- set_led(c);
- esc = 0;
- } else if (c == 27) {
- esc = 1;
- } else if (c == 12) {
- /* do a form feed */
- for (i=0; i<40; i++)
- vfd[i] = ' ';
- vfd_cursor = 0;
- } else if (c == 10) {
- if (vfd_cursor < 20)
- vfd_cursor = 20;
- else if (vfd_cursor < 40)
- vfd_cursor = 40;
- else if (vfd_cursor < 60)
- vfd_cursor = 60;
- if (vfd_cursor > 59)
- scroll_vfd();
- } else {
- /* just a character */
- if (vfd_cursor > 39)
- scroll_vfd();
- vfd[vfd_cursor++] = c;
- }
- indx--;
- buf++;
- }
- update_vfd();
-
- return len;
-}
-
-static const struct file_operations briq_panel_fops = {
- .owner = THIS_MODULE,
- .read = briq_panel_read,
- .write = briq_panel_write,
- .open = briq_panel_open,
- .release = briq_panel_release,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice briq_panel_miscdev = {
- BRIQ_PANEL_MINOR,
- "briq_panel",
- &briq_panel_fops
-};
-
-static int __init briq_panel_init(void)
-{
- struct device_node *root = of_find_node_by_path("/");
- const char *machine;
- int i;
-
- machine = of_get_property(root, "model", NULL);
- if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) {
- of_node_put(root);
- return -ENODEV;
- }
- of_node_put(root);
-
- printk(KERN_INFO
- "briq_panel: v%s Dr. Karsten Jeppesen (kj@totalimpact.com)\n",
- BRIQ_PANEL_VER);
-
- if (!request_region(BRIQ_PANEL_VFD_IOPORT, 4, "BRIQ Front Panel"))
- return -EBUSY;
-
- if (!request_region(BRIQ_PANEL_LED_IOPORT, 2, "BRIQ Front Panel")) {
- release_region(BRIQ_PANEL_VFD_IOPORT, 4);
- return -EBUSY;
- }
- ledpb = inb(BRIQ_PANEL_LED_IOPORT) & 0x000c;
-
- if (misc_register(&briq_panel_miscdev) < 0) {
- release_region(BRIQ_PANEL_VFD_IOPORT, 4);
- release_region(BRIQ_PANEL_LED_IOPORT, 2);
- return -EBUSY;
- }
-
- outb(0x38, BRIQ_PANEL_VFD_IOPORT); /* Function set */
- outb(0x01, BRIQ_PANEL_VFD_IOPORT); /* Clear display */
- outb(0x0c, BRIQ_PANEL_VFD_IOPORT); /* Display on */
- outb(0x06, BRIQ_PANEL_VFD_IOPORT); /* Entry normal */
- for (i=0; i<40; i++)
- vfd[i]=' ';
-#ifndef MODULE
- vfd[0] = 'L';
- vfd[1] = 'o';
- vfd[2] = 'a';
- vfd[3] = 'd';
- vfd[4] = 'i';
- vfd[5] = 'n';
- vfd[6] = 'g';
- vfd[7] = ' ';
- vfd[8] = '.';
- vfd[9] = '.';
- vfd[10] = '.';
-#endif /* !MODULE */
-
- update_vfd();
-
- return 0;
-}
-
-static void __exit briq_panel_exit(void)
-{
- misc_deregister(&briq_panel_miscdev);
- release_region(BRIQ_PANEL_VFD_IOPORT, 4);
- release_region(BRIQ_PANEL_LED_IOPORT, 2);
-}
-
-module_init(briq_panel_init);
-module_exit(briq_panel_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Karsten Jeppesen <karsten@jeppesens.com>");
-MODULE_DESCRIPTION("Driver for the Total Impact briQ front panel");
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index 3d3c1e6703b4..96de0249e595 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -107,17 +107,6 @@ static struct amba_driver nmk_rng_driver = {
.id_table = nmk_rng_ids,
};
-static int __init nmk_rng_init(void)
-{
- return amba_driver_register(&nmk_rng_driver);
-}
-
-static void __devexit nmk_rng_exit(void)
-{
- amba_driver_unregister(&nmk_rng_driver);
-}
-
-module_init(nmk_rng_init);
-module_exit(nmk_rng_exit);
+module_amba_driver(nmk_rng_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index b757fac3cd1f..a07a5caa599c 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -26,6 +26,8 @@
#include <asm/io.h>
+#include <plat/cpu.h>
+
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */
diff --git a/drivers/char/hw_random/tx4939-rng.c b/drivers/char/hw_random/tx4939-rng.c
index 0bc0cb70210b..de473ef3882b 100644
--- a/drivers/char/hw_random/tx4939-rng.c
+++ b/drivers/char/hw_random/tx4939-rng.c
@@ -115,10 +115,7 @@ static int __init tx4939_rng_probe(struct platform_device *dev)
rngdev = devm_kzalloc(&dev->dev, sizeof(*rngdev), GFP_KERNEL);
if (!rngdev)
return -ENOMEM;
- if (!devm_request_mem_region(&dev->dev, r->start, resource_size(r),
- dev_name(&dev->dev)))
- return -EBUSY;
- rngdev->base = devm_ioremap(&dev->dev, r->start, resource_size(r));
+ rngdev->base = devm_request_and_ioremap(&dev->dev, r);
if (!rngdev->base)
return -EBUSY;
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 34767a6d7f42..020a6aec2d86 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -153,7 +153,7 @@
#endif
static DEFINE_MUTEX(ipmi_watchdog_mutex);
-static int nowayout = WATCHDOG_NOWAYOUT;
+static bool nowayout = WATCHDOG_NOWAYOUT;
static ipmi_user_t watchdog_user;
static int watchdog_ifnum;
@@ -320,7 +320,7 @@ module_param(start_now, int, 0444);
MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as"
"soon as the driver is loaded.");
-module_param(nowayout, int, 0644);
+module_param(nowayout, bool, 0644);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
"(default=CONFIG_WATCHDOG_NOWAYOUT)");
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index da3cfee782dc..eaade8a1ecd7 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -94,7 +94,7 @@
/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
* rtc_lock held. Due to the index-port/data-port design of the RTC, we
* don't want two different things trying to get to it at once. (e.g. the
- * periodic 11 min sync from time.c vs. this driver.)
+ * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
*/
#include <linux/types.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 07f6a5abe372..f6453df4921c 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2484,7 +2484,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
/* verify range of specified line number */
line = tty->index;
- if ((line < 0) || (line >= mgslpc_device_count)) {
+ if (line >= mgslpc_device_count) {
printk("%s(%d):mgslpc_open with invalid line #%d.\n",
__FILE__,__LINE__,line);
return -ENODEV;
@@ -2836,7 +2836,6 @@ static int __init synclink_cs_init(void)
/* Initialize the tty_driver structure */
- serial_driver->owner = THIS_MODULE;
serial_driver->driver_name = "synclink_cs";
serial_driver->name = "ttySLP";
serial_driver->major = ttymajor;
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
index 9fec3232b736..2a5e45d2a9f8 100644
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kmsg_dump.h>
#include <linux/time.h>
-#include <linux/err.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index ccd124ab7ca7..872e09a02d23 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -57,8 +57,8 @@
* Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
* interrupts disabled. Due to the index-port/data-port (0x70/0x71)
* design of the RTC, we don't want two different things trying to
- * get to it at once. (e.g. the periodic 11 min sync from time.c vs.
- * this driver.)
+ * get to it at once. (e.g. the periodic 11 min sync from
+ * kernel/time/ntp.c vs. this driver.)
*/
#include <linux/interrupt.h>
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index 0c964cdcc223..ce29e7cce528 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -797,7 +797,7 @@ static int __init tlclk_init(void)
telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
- printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw.\n",
+ printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
telclk_interrupt);
ret = -ENXIO;
goto out3;
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 7fc75e47e6d0..a048199ce866 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -5,7 +5,6 @@
menuconfig TCG_TPM
tristate "TPM Hardware Support"
depends on HAS_IOMEM
- depends on EXPERIMENTAL
select SECURITYFS
---help---
If you have a TPM security chip in your system, which
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 32362cf35b8d..ad7c7320dd1b 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1221,12 +1221,13 @@ ssize_t tpm_read(struct file *file, char __user *buf,
ret_size = atomic_read(&chip->data_pending);
atomic_set(&chip->data_pending, 0);
if (ret_size > 0) { /* relay data */
+ ssize_t orig_ret_size = ret_size;
if (size < ret_size)
ret_size = size;
mutex_lock(&chip->buffer_mutex);
rc = copy_to_user(buf, chip->data_buffer, ret_size);
- memset(chip->data_buffer, 0, ret_size);
+ memset(chip->data_buffer, 0, orig_ret_size);
if (rc)
ret_size = -EFAULT;
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 010547138281..b1c5280ac159 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -99,6 +99,8 @@ struct tpm_vendor_specific {
wait_queue_head_t int_queue;
};
+#define TPM_VID_INTEL 0x8086
+
struct tpm_chip {
struct device *dev; /* Device stuff */
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index a1748621111b..d2a70cae76df 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -76,7 +76,7 @@ enum tis_defaults {
#define TPM_RID(l) (0x0F04 | ((l) << 12))
static LIST_HEAD(tis_chips);
-static DEFINE_SPINLOCK(tis_lock);
+static DEFINE_MUTEX(tis_lock);
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
static int is_itpm(struct pnp_dev *dev)
@@ -367,7 +367,12 @@ static int probe_itpm(struct tpm_chip *chip)
0x00, 0x00, 0x00, 0xf1
};
size_t len = sizeof(cmd_getticks);
- int rem_itpm = itpm;
+ bool rem_itpm = itpm;
+ u16 vendor = ioread16(chip->vendor.iobase + TPM_DID_VID(0));
+
+ /* probe only iTPMS */
+ if (vendor != TPM_VID_INTEL)
+ return 0;
itpm = 0;
@@ -390,9 +395,6 @@ static int probe_itpm(struct tpm_chip *chip)
out:
itpm = rem_itpm;
tpm_tis_ready(chip);
- /* some TPMs need a break here otherwise they will not work
- * correctly on the immediately subsequent command */
- msleep(chip->vendor.timeout_b);
release_locality(chip, chip->vendor.locality, 0);
return rc;
@@ -508,7 +510,7 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
resource_size_t len, unsigned int irq)
{
u32 vendor, intfcaps, intmask;
- int rc, i, irq_s, irq_e;
+ int rc, i, irq_s, irq_e, probe;
struct tpm_chip *chip;
if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
@@ -538,11 +540,12 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
if (!itpm) {
- itpm = probe_itpm(chip);
- if (itpm < 0) {
+ probe = probe_itpm(chip);
+ if (probe < 0) {
rc = -ENODEV;
goto out_err;
}
+ itpm = (probe == 0) ? 0 : 1;
}
if (itpm)
@@ -689,9 +692,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
}
INIT_LIST_HEAD(&chip->vendor.list);
- spin_lock(&tis_lock);
+ mutex_lock(&tis_lock);
list_add(&chip->vendor.list, &tis_chips);
- spin_unlock(&tis_lock);
+ mutex_unlock(&tis_lock);
return 0;
@@ -855,7 +858,7 @@ static void __exit cleanup_tis(void)
{
struct tpm_vendor_specific *i, *j;
struct tpm_chip *chip;
- spin_lock(&tis_lock);
+ mutex_lock(&tis_lock);
list_for_each_entry_safe(i, j, &tis_chips, list) {
chip = to_tpm_chip(i);
tpm_remove_hardware(chip->dev);
@@ -871,7 +874,7 @@ static void __exit cleanup_tis(void)
iounmap(i->iobase);
list_del(&i->list);
}
- spin_unlock(&tis_lock);
+ mutex_unlock(&tis_lock);
#ifdef CONFIG_PNP
if (!force) {
pnp_unregister_driver(&tis_pnp_driver);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index eedd5474850c..46b77ede84c0 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -184,12 +184,10 @@ static int __init ttyprintk_init(void)
if (!ttyprintk_driver)
return ret;
- ttyprintk_driver->owner = THIS_MODULE;
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
ttyprintk_driver->major = TTYAUX_MAJOR;
ttyprintk_driver->minor_start = 3;
- ttyprintk_driver->num = 1;
ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
ttyprintk_driver->init_termios = tty_std_termios;
ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
deleted file mode 100644
index ad6e64a2912d..000000000000
--- a/drivers/char/viotape.c
+++ /dev/null
@@ -1,1041 +0,0 @@
-/* -*- linux-c -*-
- * drivers/char/viotape.c
- *
- * iSeries Virtual Tape
- *
- * Authors: Dave Boutcher <boutcher@us.ibm.com>
- * Ryan Arnold <ryanarn@us.ibm.com>
- * Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell
- *
- * (C) Copyright 2000-2004 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) anyu later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * This routine provides access to tape drives owned and managed by an OS/400
- * partition running on the same box as this Linux partition.
- *
- * All tape operations are performed by sending messages back and forth to
- * the OS/400 partition. The format of the messages is defined in
- * iseries/vio.h
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/mtio.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/major.h>
-#include <linux/completion.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <asm/uaccess.h>
-#include <asm/ioctls.h>
-#include <asm/firmware.h>
-#include <asm/vio.h>
-#include <asm/iseries/vio.h>
-#include <asm/iseries/hv_lp_event.h>
-#include <asm/iseries/hv_call_event.h>
-#include <asm/iseries/hv_lp_config.h>
-
-#define VIOTAPE_VERSION "1.2"
-#define VIOTAPE_MAXREQ 1
-
-#define VIOTAPE_KERN_WARN KERN_WARNING "viotape: "
-#define VIOTAPE_KERN_INFO KERN_INFO "viotape: "
-
-static DEFINE_MUTEX(proc_viotape_mutex);
-static int viotape_numdev;
-
-/*
- * The minor number follows the conventions of the SCSI tape drives. The
- * rewind and mode are encoded in the minor #. We use this struct to break
- * them out
- */
-struct viot_devinfo_struct {
- int devno;
- int mode;
- int rewind;
-};
-
-#define VIOTAPOP_RESET 0
-#define VIOTAPOP_FSF 1
-#define VIOTAPOP_BSF 2
-#define VIOTAPOP_FSR 3
-#define VIOTAPOP_BSR 4
-#define VIOTAPOP_WEOF 5
-#define VIOTAPOP_REW 6
-#define VIOTAPOP_NOP 7
-#define VIOTAPOP_EOM 8
-#define VIOTAPOP_ERASE 9
-#define VIOTAPOP_SETBLK 10
-#define VIOTAPOP_SETDENSITY 11
-#define VIOTAPOP_SETPOS 12
-#define VIOTAPOP_GETPOS 13
-#define VIOTAPOP_SETPART 14
-#define VIOTAPOP_UNLOAD 15
-
-enum viotaperc {
- viotape_InvalidRange = 0x0601,
- viotape_InvalidToken = 0x0602,
- viotape_DMAError = 0x0603,
- viotape_UseError = 0x0604,
- viotape_ReleaseError = 0x0605,
- viotape_InvalidTape = 0x0606,
- viotape_InvalidOp = 0x0607,
- viotape_TapeErr = 0x0608,
-
- viotape_AllocTimedOut = 0x0640,
- viotape_BOTEnc = 0x0641,
- viotape_BlankTape = 0x0642,
- viotape_BufferEmpty = 0x0643,
- viotape_CleanCartFound = 0x0644,
- viotape_CmdNotAllowed = 0x0645,
- viotape_CmdNotSupported = 0x0646,
- viotape_DataCheck = 0x0647,
- viotape_DecompressErr = 0x0648,
- viotape_DeviceTimeout = 0x0649,
- viotape_DeviceUnavail = 0x064a,
- viotape_DeviceBusy = 0x064b,
- viotape_EndOfMedia = 0x064c,
- viotape_EndOfTape = 0x064d,
- viotape_EquipCheck = 0x064e,
- viotape_InsufficientRs = 0x064f,
- viotape_InvalidLogBlk = 0x0650,
- viotape_LengthError = 0x0651,
- viotape_LibDoorOpen = 0x0652,
- viotape_LoadFailure = 0x0653,
- viotape_NotCapable = 0x0654,
- viotape_NotOperational = 0x0655,
- viotape_NotReady = 0x0656,
- viotape_OpCancelled = 0x0657,
- viotape_PhyLinkErr = 0x0658,
- viotape_RdyNotBOT = 0x0659,
- viotape_TapeMark = 0x065a,
- viotape_WriteProt = 0x065b
-};
-
-static const struct vio_error_entry viotape_err_table[] = {
- { viotape_InvalidRange, EIO, "Internal error" },
- { viotape_InvalidToken, EIO, "Internal error" },
- { viotape_DMAError, EIO, "DMA error" },
- { viotape_UseError, EIO, "Internal error" },
- { viotape_ReleaseError, EIO, "Internal error" },
- { viotape_InvalidTape, EIO, "Invalid tape device" },
- { viotape_InvalidOp, EIO, "Invalid operation" },
- { viotape_TapeErr, EIO, "Tape error" },
- { viotape_AllocTimedOut, EBUSY, "Allocate timed out" },
- { viotape_BOTEnc, EIO, "Beginning of tape encountered" },
- { viotape_BlankTape, EIO, "Blank tape" },
- { viotape_BufferEmpty, EIO, "Buffer empty" },
- { viotape_CleanCartFound, ENOMEDIUM, "Cleaning cartridge found" },
- { viotape_CmdNotAllowed, EIO, "Command not allowed" },
- { viotape_CmdNotSupported, EIO, "Command not supported" },
- { viotape_DataCheck, EIO, "Data check" },
- { viotape_DecompressErr, EIO, "Decompression error" },
- { viotape_DeviceTimeout, EBUSY, "Device timeout" },
- { viotape_DeviceUnavail, EIO, "Device unavailable" },
- { viotape_DeviceBusy, EBUSY, "Device busy" },
- { viotape_EndOfMedia, ENOSPC, "End of media" },
- { viotape_EndOfTape, ENOSPC, "End of tape" },
- { viotape_EquipCheck, EIO, "Equipment check" },
- { viotape_InsufficientRs, EOVERFLOW, "Insufficient tape resources" },
- { viotape_InvalidLogBlk, EIO, "Invalid logical block location" },
- { viotape_LengthError, EOVERFLOW, "Length error" },
- { viotape_LibDoorOpen, EBUSY, "Door open" },
- { viotape_LoadFailure, ENOMEDIUM, "Load failure" },
- { viotape_NotCapable, EIO, "Not capable" },
- { viotape_NotOperational, EIO, "Not operational" },
- { viotape_NotReady, EIO, "Not ready" },
- { viotape_OpCancelled, EIO, "Operation cancelled" },
- { viotape_PhyLinkErr, EIO, "Physical link error" },
- { viotape_RdyNotBOT, EIO, "Ready but not beginning of tape" },
- { viotape_TapeMark, EIO, "Tape mark" },
- { viotape_WriteProt, EROFS, "Write protection error" },
- { 0, 0, NULL },
-};
-
-/* Maximum number of tapes we support */
-#define VIOTAPE_MAX_TAPE HVMAXARCHITECTEDVIRTUALTAPES
-#define MAX_PARTITIONS 4
-
-/* defines for current tape state */
-#define VIOT_IDLE 0
-#define VIOT_READING 1
-#define VIOT_WRITING 2
-
-/* Our info on the tapes */
-static struct {
- const char *rsrcname;
- const char *type;
- const char *model;
-} viotape_unitinfo[VIOTAPE_MAX_TAPE];
-
-static struct mtget viomtget[VIOTAPE_MAX_TAPE];
-
-static struct class *tape_class;
-
-static struct device *tape_device[VIOTAPE_MAX_TAPE];
-
-/*
- * maintain the current state of each tape (and partition)
- * so that we know when to write EOF marks.
- */
-static struct {
- unsigned char cur_part;
- unsigned char part_stat_rwi[MAX_PARTITIONS];
-} state[VIOTAPE_MAX_TAPE];
-
-/* We single-thread */
-static struct semaphore reqSem;
-
-/*
- * When we send a request, we use this struct to get the response back
- * from the interrupt handler
- */
-struct op_struct {
- void *buffer;
- dma_addr_t dmaaddr;
- size_t count;
- int rc;
- int non_blocking;
- struct completion com;
- struct device *dev;
- struct op_struct *next;
-};
-
-static spinlock_t op_struct_list_lock;
-static struct op_struct *op_struct_list;
-
-/* forward declaration to resolve interdependence */
-static int chg_state(int index, unsigned char new_state, struct file *file);
-
-/* procfs support */
-static int proc_viotape_show(struct seq_file *m, void *v)
-{
- int i;
-
- seq_printf(m, "viotape driver version " VIOTAPE_VERSION "\n");
- for (i = 0; i < viotape_numdev; i++) {
- seq_printf(m, "viotape device %d is iSeries resource %10.10s"
- "type %4.4s, model %3.3s\n",
- i, viotape_unitinfo[i].rsrcname,
- viotape_unitinfo[i].type,
- viotape_unitinfo[i].model);
- }
- return 0;
-}
-
-static int proc_viotape_open(struct inode *inode, struct file *file)
-{
- return single_open(file, proc_viotape_show, NULL);
-}
-
-static const struct file_operations proc_viotape_operations = {
- .owner = THIS_MODULE,
- .open = proc_viotape_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/* Decode the device minor number into its parts */
-void get_dev_info(struct inode *ino, struct viot_devinfo_struct *devi)
-{
- devi->devno = iminor(ino) & 0x1F;
- devi->mode = (iminor(ino) & 0x60) >> 5;
- /* if bit is set in the minor, do _not_ rewind automatically */
- devi->rewind = (iminor(ino) & 0x80) == 0;
-}
-
-/* This is called only from the exit and init paths, so no need for locking */
-static void clear_op_struct_pool(void)
-{
- while (op_struct_list) {
- struct op_struct *toFree = op_struct_list;
- op_struct_list = op_struct_list->next;
- kfree(toFree);
- }
-}
-
-/* Likewise, this is only called from the init path */
-static int add_op_structs(int structs)
-{
- int i;
-
- for (i = 0; i < structs; ++i) {
- struct op_struct *new_struct =
- kmalloc(sizeof(*new_struct), GFP_KERNEL);
- if (!new_struct) {
- clear_op_struct_pool();
- return -ENOMEM;
- }
- new_struct->next = op_struct_list;
- op_struct_list = new_struct;
- }
- return 0;
-}
-
-/* Allocate an op structure from our pool */
-static struct op_struct *get_op_struct(void)
-{
- struct op_struct *retval;
- unsigned long flags;
-
- spin_lock_irqsave(&op_struct_list_lock, flags);
- retval = op_struct_list;
- if (retval)
- op_struct_list = retval->next;
- spin_unlock_irqrestore(&op_struct_list_lock, flags);
- if (retval) {
- memset(retval, 0, sizeof(*retval));
- init_completion(&retval->com);
- }
-
- return retval;
-}
-
-/* Return an op structure to our pool */
-static void free_op_struct(struct op_struct *op_struct)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&op_struct_list_lock, flags);
- op_struct->next = op_struct_list;
- op_struct_list = op_struct;
- spin_unlock_irqrestore(&op_struct_list_lock, flags);
-}
-
-/* Map our tape return codes to errno values */
-int tape_rc_to_errno(int tape_rc, char *operation, int tapeno)
-{
- const struct vio_error_entry *err;
-
- if (tape_rc == 0)
- return 0;
-
- err = vio_lookup_rc(viotape_err_table, tape_rc);
- printk(VIOTAPE_KERN_WARN "error(%s) 0x%04x on Device %d (%-10s): %s\n",
- operation, tape_rc, tapeno,
- viotape_unitinfo[tapeno].rsrcname, err->msg);
- return -err->errno;
-}
-
-/* Write */
-static ssize_t viotap_write(struct file *file, const char *buf,
- size_t count, loff_t * ppos)
-{
- HvLpEvent_Rc hvrc;
- unsigned short flags = file->f_flags;
- int noblock = ((flags & O_NONBLOCK) != 0);
- ssize_t ret;
- struct viot_devinfo_struct devi;
- struct op_struct *op = get_op_struct();
-
- if (op == NULL)
- return -ENOMEM;
-
- get_dev_info(file->f_path.dentry->d_inode, &devi);
-
- /*
- * We need to make sure we can send a request. We use
- * a semaphore to keep track of # requests in use. If
- * we are non-blocking, make sure we don't block on the
- * semaphore
- */
- if (noblock) {
- if (down_trylock(&reqSem)) {
- ret = -EWOULDBLOCK;
- goto free_op;
- }
- } else
- down(&reqSem);
-
- /* Allocate a DMA buffer */
- op->dev = tape_device[devi.devno];
- op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr,
- GFP_ATOMIC);
-
- if (op->buffer == NULL) {
- printk(VIOTAPE_KERN_WARN
- "error allocating dma buffer for len %ld\n",
- count);
- ret = -EFAULT;
- goto up_sem;
- }
-
- /* Copy the data into the buffer */
- if (copy_from_user(op->buffer, buf, count)) {
- printk(VIOTAPE_KERN_WARN "tape: error on copy from user\n");
- ret = -EFAULT;
- goto free_dma;
- }
-
- op->non_blocking = noblock;
- init_completion(&op->com);
- op->count = count;
-
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotapewrite,
- HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op, VIOVERSION << 16,
- ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0);
- if (hvrc != HvLpEvent_Rc_Good) {
- printk(VIOTAPE_KERN_WARN "hv error on op %d\n",
- (int)hvrc);
- ret = -EIO;
- goto free_dma;
- }
-
- if (noblock)
- return count;
-
- wait_for_completion(&op->com);
-
- if (op->rc)
- ret = tape_rc_to_errno(op->rc, "write", devi.devno);
- else {
- chg_state(devi.devno, VIOT_WRITING, file);
- ret = op->count;
- }
-
-free_dma:
- dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr);
-up_sem:
- up(&reqSem);
-free_op:
- free_op_struct(op);
- return ret;
-}
-
-/* read */
-static ssize_t viotap_read(struct file *file, char *buf, size_t count,
- loff_t *ptr)
-{
- HvLpEvent_Rc hvrc;
- unsigned short flags = file->f_flags;
- struct op_struct *op = get_op_struct();
- int noblock = ((flags & O_NONBLOCK) != 0);
- ssize_t ret;
- struct viot_devinfo_struct devi;
-
- if (op == NULL)
- return -ENOMEM;
-
- get_dev_info(file->f_path.dentry->d_inode, &devi);
-
- /*
- * We need to make sure we can send a request. We use
- * a semaphore to keep track of # requests in use. If
- * we are non-blocking, make sure we don't block on the
- * semaphore
- */
- if (noblock) {
- if (down_trylock(&reqSem)) {
- ret = -EWOULDBLOCK;
- goto free_op;
- }
- } else
- down(&reqSem);
-
- chg_state(devi.devno, VIOT_READING, file);
-
- /* Allocate a DMA buffer */
- op->dev = tape_device[devi.devno];
- op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr,
- GFP_ATOMIC);
- if (op->buffer == NULL) {
- ret = -EFAULT;
- goto up_sem;
- }
-
- op->count = count;
- init_completion(&op->com);
-
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotaperead,
- HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op, VIOVERSION << 16,
- ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0);
- if (hvrc != HvLpEvent_Rc_Good) {
- printk(VIOTAPE_KERN_WARN "tape hv error on op %d\n",
- (int)hvrc);
- ret = -EIO;
- goto free_dma;
- }
-
- wait_for_completion(&op->com);
-
- if (op->rc)
- ret = tape_rc_to_errno(op->rc, "read", devi.devno);
- else {
- ret = op->count;
- if (ret && copy_to_user(buf, op->buffer, ret)) {
- printk(VIOTAPE_KERN_WARN "error on copy_to_user\n");
- ret = -EFAULT;
- }
- }
-
-free_dma:
- dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr);
-up_sem:
- up(&reqSem);
-free_op:
- free_op_struct(op);
- return ret;
-}
-
-/* ioctl */
-static int viotap_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- HvLpEvent_Rc hvrc;
- int ret;
- struct viot_devinfo_struct devi;
- struct mtop mtc;
- u32 myOp;
- struct op_struct *op = get_op_struct();
-
- if (op == NULL)
- return -ENOMEM;
-
- get_dev_info(file->f_path.dentry->d_inode, &devi);
-
- down(&reqSem);
-
- ret = -EINVAL;
-
- switch (cmd) {
- case MTIOCTOP:
- ret = -EFAULT;
- /*
- * inode is null if and only if we (the kernel)
- * made the request
- */
- if (inode == NULL)
- memcpy(&mtc, (void *) arg, sizeof(struct mtop));
- else if (copy_from_user((char *)&mtc, (char *)arg,
- sizeof(struct mtop)))
- goto free_op;
-
- ret = -EIO;
- switch (mtc.mt_op) {
- case MTRESET:
- myOp = VIOTAPOP_RESET;
- break;
- case MTFSF:
- myOp = VIOTAPOP_FSF;
- break;
- case MTBSF:
- myOp = VIOTAPOP_BSF;
- break;
- case MTFSR:
- myOp = VIOTAPOP_FSR;
- break;
- case MTBSR:
- myOp = VIOTAPOP_BSR;
- break;
- case MTWEOF:
- myOp = VIOTAPOP_WEOF;
- break;
- case MTREW:
- myOp = VIOTAPOP_REW;
- break;
- case MTNOP:
- myOp = VIOTAPOP_NOP;
- break;
- case MTEOM:
- myOp = VIOTAPOP_EOM;
- break;
- case MTERASE:
- myOp = VIOTAPOP_ERASE;
- break;
- case MTSETBLK:
- myOp = VIOTAPOP_SETBLK;
- break;
- case MTSETDENSITY:
- myOp = VIOTAPOP_SETDENSITY;
- break;
- case MTTELL:
- myOp = VIOTAPOP_GETPOS;
- break;
- case MTSEEK:
- myOp = VIOTAPOP_SETPOS;
- break;
- case MTSETPART:
- myOp = VIOTAPOP_SETPART;
- break;
- case MTOFFL:
- myOp = VIOTAPOP_UNLOAD;
- break;
- default:
- printk(VIOTAPE_KERN_WARN "MTIOCTOP called "
- "with invalid op 0x%x\n", mtc.mt_op);
- goto free_op;
- }
-
- /*
- * if we moved the head, we are no longer
- * reading or writing
- */
- switch (mtc.mt_op) {
- case MTFSF:
- case MTBSF:
- case MTFSR:
- case MTBSR:
- case MTTELL:
- case MTSEEK:
- case MTREW:
- chg_state(devi.devno, VIOT_IDLE, file);
- }
-
- init_completion(&op->com);
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotapeop,
- HvLpEvent_AckInd_DoAck,
- HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op,
- VIOVERSION << 16,
- ((u64)devi.devno << 48), 0,
- (((u64)myOp) << 32) | mtc.mt_count, 0);
- if (hvrc != HvLpEvent_Rc_Good) {
- printk(VIOTAPE_KERN_WARN "hv error on op %d\n",
- (int)hvrc);
- goto free_op;
- }
- wait_for_completion(&op->com);
- ret = tape_rc_to_errno(op->rc, "tape operation", devi.devno);
- goto free_op;
-
- case MTIOCGET:
- ret = -EIO;
- init_completion(&op->com);
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotapegetstatus,
- HvLpEvent_AckInd_DoAck,
- HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op, VIOVERSION << 16,
- ((u64)devi.devno << 48), 0, 0, 0);
- if (hvrc != HvLpEvent_Rc_Good) {
- printk(VIOTAPE_KERN_WARN "hv error on op %d\n",
- (int)hvrc);
- goto free_op;
- }
- wait_for_completion(&op->com);
-
- /* Operation is complete - grab the error code */
- ret = tape_rc_to_errno(op->rc, "get status", devi.devno);
- free_op_struct(op);
- up(&reqSem);
-
- if ((ret == 0) && copy_to_user((void *)arg,
- &viomtget[devi.devno],
- sizeof(viomtget[0])))
- ret = -EFAULT;
- return ret;
- case MTIOCPOS:
- printk(VIOTAPE_KERN_WARN "Got an (unsupported) MTIOCPOS\n");
- break;
- default:
- printk(VIOTAPE_KERN_WARN "got an unsupported ioctl 0x%0x\n",
- cmd);
- break;
- }
-
-free_op:
- free_op_struct(op);
- up(&reqSem);
- return ret;
-}
-
-static long viotap_unlocked_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- long rc;
-
- mutex_lock(&proc_viotape_mutex);
- rc = viotap_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
- mutex_unlock(&proc_viotape_mutex);
- return rc;
-}
-
-static int viotap_open(struct inode *inode, struct file *file)
-{
- HvLpEvent_Rc hvrc;
- struct viot_devinfo_struct devi;
- int ret;
- struct op_struct *op = get_op_struct();
-
- if (op == NULL)
- return -ENOMEM;
-
- mutex_lock(&proc_viotape_mutex);
- get_dev_info(file->f_path.dentry->d_inode, &devi);
-
- /* Note: We currently only support one mode! */
- if ((devi.devno >= viotape_numdev) || (devi.mode)) {
- ret = -ENODEV;
- goto free_op;
- }
-
- init_completion(&op->com);
-
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotapeopen,
- HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op, VIOVERSION << 16,
- ((u64)devi.devno << 48), 0, 0, 0);
- if (hvrc != 0) {
- printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n",
- (int) hvrc);
- ret = -EIO;
- goto free_op;
- }
-
- wait_for_completion(&op->com);
- ret = tape_rc_to_errno(op->rc, "open", devi.devno);
-
-free_op:
- free_op_struct(op);
- mutex_unlock(&proc_viotape_mutex);
- return ret;
-}
-
-
-static int viotap_release(struct inode *inode, struct file *file)
-{
- HvLpEvent_Rc hvrc;
- struct viot_devinfo_struct devi;
- int ret = 0;
- struct op_struct *op = get_op_struct();
-
- if (op == NULL)
- return -ENOMEM;
- init_completion(&op->com);
-
- get_dev_info(file->f_path.dentry->d_inode, &devi);
-
- if (devi.devno >= viotape_numdev) {
- ret = -ENODEV;
- goto free_op;
- }
-
- chg_state(devi.devno, VIOT_IDLE, file);
-
- if (devi.rewind) {
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotapeop,
- HvLpEvent_AckInd_DoAck,
- HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op, VIOVERSION << 16,
- ((u64)devi.devno << 48), 0,
- ((u64)VIOTAPOP_REW) << 32, 0);
- wait_for_completion(&op->com);
-
- tape_rc_to_errno(op->rc, "rewind", devi.devno);
- }
-
- hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp,
- HvLpEvent_Type_VirtualIo,
- viomajorsubtype_tape | viotapeclose,
- HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
- viopath_sourceinst(viopath_hostLp),
- viopath_targetinst(viopath_hostLp),
- (u64)(unsigned long)op, VIOVERSION << 16,
- ((u64)devi.devno << 48), 0, 0, 0);
- if (hvrc != 0) {
- printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n",
- (int) hvrc);
- ret = -EIO;
- goto free_op;
- }
-
- wait_for_completion(&op->com);
-
- if (op->rc)
- printk(VIOTAPE_KERN_WARN "close failed\n");
-
-free_op:
- free_op_struct(op);
- return ret;
-}
-
-const struct file_operations viotap_fops = {
- .owner = THIS_MODULE,
- .read = viotap_read,
- .write = viotap_write,
- .unlocked_ioctl = viotap_unlocked_ioctl,
- .open = viotap_open,
- .release = viotap_release,
- .llseek = noop_llseek,
-};
-
-/* Handle interrupt events for tape */
-static void vioHandleTapeEvent(struct HvLpEvent *event)
-{
- int tapeminor;
- struct op_struct *op;
- struct viotapelpevent *tevent = (struct viotapelpevent *)event;
-
- if (event == NULL) {
- /* Notification that a partition went away! */
- if (!viopath_isactive(viopath_hostLp)) {
- /* TODO! Clean up */
- }
- return;
- }
-
- tapeminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK;
- op = (struct op_struct *)event->xCorrelationToken;
- switch (tapeminor) {
- case viotapeopen:
- case viotapeclose:
- op->rc = tevent->sub_type_result;
- complete(&op->com);
- break;
- case viotaperead:
- op->rc = tevent->sub_type_result;
- op->count = tevent->len;
- complete(&op->com);
- break;
- case viotapewrite:
- if (op->non_blocking) {
- dma_free_coherent(op->dev, op->count,
- op->buffer, op->dmaaddr);
- free_op_struct(op);
- up(&reqSem);
- } else {
- op->rc = tevent->sub_type_result;
- op->count = tevent->len;
- complete(&op->com);
- }
- break;
- case viotapeop:
- case viotapegetpos:
- case viotapesetpos:
- case viotapegetstatus:
- if (op) {
- op->count = tevent->u.op.count;
- op->rc = tevent->sub_type_result;
- if (!op->non_blocking)
- complete(&op->com);
- }
- break;
- default:
- printk(VIOTAPE_KERN_WARN "weird ack\n");
- }
-}
-
-static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id)
-{
- int i = vdev->unit_address;
- int j;
- struct device_node *node = vdev->dev.of_node;
-
- if (i >= VIOTAPE_MAX_TAPE)
- return -ENODEV;
- if (!node)
- return -ENODEV;
-
- if (i >= viotape_numdev)
- viotape_numdev = i + 1;
-
- tape_device[i] = &vdev->dev;
- viotape_unitinfo[i].rsrcname = of_get_property(node,
- "linux,vio_rsrcname", NULL);
- viotape_unitinfo[i].type = of_get_property(node, "linux,vio_type",
- NULL);
- viotape_unitinfo[i].model = of_get_property(node, "linux,vio_model",
- NULL);
-
- state[i].cur_part = 0;
- for (j = 0; j < MAX_PARTITIONS; ++j)
- state[i].part_stat_rwi[j] = VIOT_IDLE;
- device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL,
- "iseries!vt%d", i);
- device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), NULL,
- "iseries!nvt%d", i);
- printk(VIOTAPE_KERN_INFO "tape iseries/vt%d is iSeries "
- "resource %10.10s type %4.4s, model %3.3s\n",
- i, viotape_unitinfo[i].rsrcname,
- viotape_unitinfo[i].type, viotape_unitinfo[i].model);
- return 0;
-}
-
-static int viotape_remove(struct vio_dev *vdev)
-{
- int i = vdev->unit_address;
-
- device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80));
- device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i));
- return 0;
-}
-
-/**
- * viotape_device_table: Used by vio.c to match devices that we
- * support.
- */
-static struct vio_device_id viotape_device_table[] __devinitdata = {
- { "byte", "IBM,iSeries-viotape" },
- { "", "" }
-};
-MODULE_DEVICE_TABLE(vio, viotape_device_table);
-
-static struct vio_driver viotape_driver = {
- .id_table = viotape_device_table,
- .probe = viotape_probe,
- .remove = viotape_remove,
- .driver = {
- .name = "viotape",
- .owner = THIS_MODULE,
- }
-};
-
-
-int __init viotap_init(void)
-{
- int ret;
-
- if (!firmware_has_feature(FW_FEATURE_ISERIES))
- return -ENODEV;
-
- op_struct_list = NULL;
- if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) {
- printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n");
- return ret;
- }
- spin_lock_init(&op_struct_list_lock);
-
- sema_init(&reqSem, VIOTAPE_MAXREQ);
-
- if (viopath_hostLp == HvLpIndexInvalid) {
- vio_set_hostlp();
- if (viopath_hostLp == HvLpIndexInvalid) {
- ret = -ENODEV;
- goto clear_op;
- }
- }
-
- ret = viopath_open(viopath_hostLp, viomajorsubtype_tape,
- VIOTAPE_MAXREQ + 2);
- if (ret) {
- printk(VIOTAPE_KERN_WARN
- "error on viopath_open to hostlp %d\n", ret);
- ret = -EIO;
- goto clear_op;
- }
-
- printk(VIOTAPE_KERN_INFO "vers " VIOTAPE_VERSION
- ", hosting partition %d\n", viopath_hostLp);
-
- vio_setHandler(viomajorsubtype_tape, vioHandleTapeEvent);
-
- ret = register_chrdev(VIOTAPE_MAJOR, "viotape", &viotap_fops);
- if (ret < 0) {
- printk(VIOTAPE_KERN_WARN "Error registering viotape device\n");
- goto clear_handler;
- }
-
- tape_class = class_create(THIS_MODULE, "tape");
- if (IS_ERR(tape_class)) {
- printk(VIOTAPE_KERN_WARN "Unable to allocat class\n");
- ret = PTR_ERR(tape_class);
- goto unreg_chrdev;
- }
-
- ret = vio_register_driver(&viotape_driver);
- if (ret)
- goto unreg_class;
-
- proc_create("iSeries/viotape", S_IFREG|S_IRUGO, NULL,
- &proc_viotape_operations);
-
- return 0;
-
-unreg_class:
- class_destroy(tape_class);
-unreg_chrdev:
- unregister_chrdev(VIOTAPE_MAJOR, "viotape");
-clear_handler:
- vio_clearHandler(viomajorsubtype_tape);
- viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2);
-clear_op:
- clear_op_struct_pool();
- return ret;
-}
-
-/* Give a new state to the tape object */
-static int chg_state(int index, unsigned char new_state, struct file *file)
-{
- unsigned char *cur_state =
- &state[index].part_stat_rwi[state[index].cur_part];
- int rc = 0;
-
- /* if the same state, don't bother */
- if (*cur_state == new_state)
- return 0;
-
- /* write an EOF if changing from writing to some other state */
- if (*cur_state == VIOT_WRITING) {
- struct mtop write_eof = { MTWEOF, 1 };
-
- rc = viotap_ioctl(NULL, file, MTIOCTOP,
- (unsigned long)&write_eof);
- }
- *cur_state = new_state;
- return rc;
-}
-
-/* Cleanup */
-static void __exit viotap_exit(void)
-{
- remove_proc_entry("iSeries/viotape", NULL);
- vio_unregister_driver(&viotape_driver);
- class_destroy(tape_class);
- unregister_chrdev(VIOTAPE_MAJOR, "viotape");
- viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2);
- vio_clearHandler(viomajorsubtype_tape);
- clear_op_struct_pool();
-}
-
-MODULE_LICENSE("GPL");
-module_init(viotap_init);
-module_exit(viotap_exit);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.