diff options
Diffstat (limited to 'drivers/char')
28 files changed, 76 insertions, 1030 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 122254155ae1..43d6ba83a191 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -124,7 +124,7 @@ config COMPUTONE which give you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, say - Y here and read <file:Documentation/computone.txt>. + Y here and read <file:Documentation/serial/computone.txt>. To compile this driver as module, choose M here: the module will be called ip2. @@ -136,7 +136,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read <file:Documentation/rocket.txt>. + and this driver read <file:Documentation/serial/rocket.txt>. To compile this driver as a module, choose M here: the module will be called rocket. @@ -154,7 +154,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - <file:Documentation/README.cycladesZ>. + <file:Documentation/serial/README.cycladesZ>. To compile this driver as a module, choose M here: the module will be called cyclades. @@ -183,7 +183,7 @@ config DIGIEPCA box, for instance in order to become a dial-in server. This driver supports the original PC (ISA) boards as well as PCI, and EISA. If you have a card like this, say Y here and read the file - <file:Documentation/digiepca.txt>. + <file:Documentation/serial/digiepca.txt>. To compile this driver as a module, choose M here: the module will be called epca. @@ -289,7 +289,7 @@ config RISCOM8 which gives you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, - say Y here and read the file <file:Documentation/riscom8.txt>. + say Y here and read the file <file:Documentation/serial/riscom8.txt>. Also it's possible to say M here and compile this driver as kernel loadable module; the module will be called riscom8. @@ -304,8 +304,8 @@ config SPECIALIX your Linux box, for instance in order to become a dial-in server. If you have a card like that, say Y here and read the file - <file:Documentation/specialix.txt>. Also it's possible to say M here - and compile this driver as kernel loadable module which will be + <file:Documentation/serial/specialix.txt>. Also it's possible to say + M here and compile this driver as kernel loadable module which will be called specialix. config SX @@ -313,7 +313,7 @@ config SX depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. - Please read the file <file:Documentation/sx.txt> for details. + Please read the file <file:Documentation/serial/sx.txt> for details. This driver can only be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -344,8 +344,8 @@ config STALDRV like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you say Y here, you will be asked for your specific card model in the next - questions. Make sure to read <file:Documentation/stallion.txt> in - this case. If you have never heard about all this, it's safe to + questions. Make sure to read <file:Documentation/serial/stallion.txt> + in this case. If you have never heard about all this, it's safe to say N. config STALLION @@ -354,7 +354,7 @@ config STALLION help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read - <file:Documentation/stallion.txt>. + <file:Documentation/serial/stallion.txt>. To compile this driver as a module, choose M here: the module will be called stallion. @@ -365,7 +365,7 @@ config ISTALLION help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read - <file:Documentation/stallion.txt>. + <file:Documentation/serial/stallion.txt>. To compile this driver as a module, choose M here: the module will be called istallion. @@ -812,28 +812,6 @@ config JS_RTC To compile this driver as a module, choose M here: the module will be called js-rtc. -config SGI_DS1286 - tristate "SGI DS1286 RTC support" - depends on SGI_HAS_DS1286 - help - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock built into your computer. - Every SGI has such a clock built in. It reports status information - via the file /proc/rtc and its behaviour is set by various ioctls on - /dev/rtc. - -config SGI_IP27_RTC - bool "SGI M48T35 RTC support" - depends on SGI_IP27 - help - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock built into your computer. - Every SGI has such a clock built in. It reports status information - via the file /proc/rtc and its behaviour is set by various ioctls on - /dev/rtc. - config GEN_RTC tristate "Generic /dev/rtc emulation" depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 1a4247dccac4..438f71317c5c 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -74,8 +74,6 @@ obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_HPET) += hpet.o obj-$(CONFIG_GEN_RTC) += genrtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o -obj-$(CONFIG_SGI_DS1286) += ds1286.o -obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o obj-$(CONFIG_DS1302) += ds1302.o obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ ifeq ($(CONFIG_GENERIC_NVRAM),y) diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 0f004b65ec03..03f95ec08f59 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -27,7 +27,7 @@ static int uninorth_rev; static int is_u3; -static char __devinitdata *aperture = NULL; +static char *aperture = NULL; static int uninorth_fetch_size(void) { diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni index 1f06889a96b9..bc6163484f62 100644 --- a/drivers/char/cp437.uni +++ b/drivers/char/cp437.uni @@ -27,7 +27,7 @@ 0x0c U+2640 0x0d U+266a 0x0e U+266b -0x0f U+263c +0x0f U+263c U+00a4 0x10 U+25b6 U+25ba 0x11 U+25c0 U+25c4 0x12 U+2195 @@ -55,7 +55,7 @@ 0x24 U+0024 0x25 U+0025 0x26 U+0026 -0x27 U+0027 +0x27 U+0027 U+00b4 0x28 U+0028 0x29 U+0029 0x2a U+002a @@ -84,7 +84,7 @@ 0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3 0x42 U+0042 0x43 U+0043 U+00a9 -0x44 U+0044 +0x44 U+0044 U+00d0 0x45 U+0045 U+00c8 U+00ca U+00cb 0x46 U+0046 0x47 U+0047 @@ -140,7 +140,7 @@ 0x79 U+0079 U+00fd 0x7a U+007a 0x7b U+007b -0x7c U+007c U+00a5 +0x7c U+007c U+00a6 0x7d U+007d 0x7e U+007e # @@ -263,10 +263,10 @@ 0xe8 U+03a6 U+00d8 0xe9 U+0398 0xea U+03a9 U+2126 -0xeb U+03b4 +0xeb U+03b4 U+00f0 0xec U+221e 0xed U+03c6 U+00f8 -0xee U+03b5 +0xee U+03b5 U+2208 0xef U+2229 0xf0 U+2261 0xf1 U+00b1 diff --git a/drivers/char/ds1286.c b/drivers/char/ds1286.c deleted file mode 100644 index 0a826d7be10e..000000000000 --- a/drivers/char/ds1286.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * DS1286 Real Time Clock interface for Linux - * - * Copyright (C) 1998, 1999, 2000 Ralf Baechle - * - * Based on code written by Paul Gortmaker. - * - * This driver allows use of the real time clock (built into nearly all - * computers) from user space. It exports the /dev/rtc interface supporting - * various ioctl() and also the /proc/rtc pseudo-file for status - * information. - * - * The ioctls can be used to set the interrupt behaviour and generation rate - * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make - * use of these timer interrupts, be they interval or alarm based. - * - * The /dev/rtc interface will block on reads until an interrupt has been - * received. If a RTC interrupt has already happened, it will output an - * unsigned long and then block. The output value contains the interrupt - * status in the low byte and the number of interrupts since the last read - * in the remaining high bytes. The /dev/rtc interface can also be used with - * the select(2) call. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/ds1286.h> -#include <linux/smp_lock.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/miscdevice.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/rtc.h> -#include <linux/spinlock.h> -#include <linux/bcd.h> -#include <linux/proc_fs.h> -#include <linux/jiffies.h> - -#include <asm/uaccess.h> -#include <asm/system.h> - -#define DS1286_VERSION "1.0" - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait); - -static ssize_t ds1286_read(struct file *file, char *buf, - size_t count, loff_t *ppos); - -static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - -static unsigned int ds1286_poll(struct file *file, poll_table *wait); - -static void ds1286_get_alm_time (struct rtc_time *alm_tm); -static void ds1286_get_time(struct rtc_time *rtc_tm); -static int ds1286_set_time(struct rtc_time *rtc_tm); - -static inline unsigned char ds1286_is_updating(void); - -static DEFINE_SPINLOCK(ds1286_lock); - -static int ds1286_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -/* - * Bits in rtc_status. (7 bits of room for future expansion) - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ - -static unsigned char ds1286_status; /* bitmapped status byte. */ - -static unsigned char days_in_mo[] = { - 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 -}; - -/* - * Now all the various file operations that we export. - */ - -static ssize_t ds1286_read(struct file *file, char *buf, - size_t count, loff_t *ppos) -{ - return -EIO; -} - -static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct rtc_time wtime; - - switch (cmd) { - case RTC_AIE_OFF: /* Mask alarm int. enab. bit */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val |= RTC_TDM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_AIE_ON: /* Allow alarm interrupts. */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val &= ~RTC_TDM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_WIE_OFF: /* Mask watchdog int. enab. bit */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val |= RTC_WAM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_WIE_ON: /* Allow watchdog interrupts. */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val &= ~RTC_WAM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_ALM_READ: /* Read the present alarm time */ - { - /* - * This returns a struct rtc_time. Reading >= 0xc0 - * means "don't care" or "match all". Only the tm_hour, - * tm_min, and tm_sec values are filled in. - */ - - memset(&wtime, 0, sizeof(wtime)); - ds1286_get_alm_time(&wtime); - break; - } - case RTC_ALM_SET: /* Store a time into the alarm */ - { - /* - * This expects a struct rtc_time. Writing 0xff means - * "don't care" or "match all". Only the tm_hour, - * tm_min and tm_sec are used. - */ - unsigned char hrs, min, sec; - struct rtc_time alm_tm; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&alm_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - hrs = alm_tm.tm_hour; - min = alm_tm.tm_min; - sec = alm_tm.tm_sec; - - if (hrs >= 24) - hrs = 0xff; - - if (min >= 60) - min = 0xff; - - if (sec != 0) - return -EINVAL; - - min = bin2bcd(min); - min = bin2bcd(hrs); - - spin_lock(&ds1286_lock); - rtc_write(hrs, RTC_HOURS_ALARM); - rtc_write(min, RTC_MINUTES_ALARM); - spin_unlock(&ds1286_lock); - - return 0; - } - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - memset(&wtime, 0, sizeof(wtime)); - ds1286_get_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - return ds1286_set_time(&rtc_tm); - } - default: - return -EINVAL; - } - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int ds1286_open(struct inode *inode, struct file *file) -{ - lock_kernel(); - spin_lock_irq(&ds1286_lock); - - if (ds1286_status & RTC_IS_OPEN) - goto out_busy; - - ds1286_status |= RTC_IS_OPEN; - - spin_unlock_irq(&ds1286_lock); - unlock_kernel(); - return 0; - -out_busy: - spin_lock_irq(&ds1286_lock); - unlock_kernel(); - return -EBUSY; -} - -static int ds1286_release(struct inode *inode, struct file *file) -{ - ds1286_status &= ~RTC_IS_OPEN; - - return 0; -} - -static unsigned int ds1286_poll(struct file *file, poll_table *wait) -{ - poll_wait(file, &ds1286_wait, wait); - - return 0; -} - -/* - * The various file operations we support. - */ - -static const struct file_operations ds1286_fops = { - .llseek = no_llseek, - .read = ds1286_read, - .poll = ds1286_poll, - .ioctl = ds1286_ioctl, - .open = ds1286_open, - .release = ds1286_release, -}; - -static struct miscdevice ds1286_dev= -{ - .minor = RTC_MINOR, - .name = "rtc", - .fops = &ds1286_fops, -}; - -static int __init ds1286_init(void) -{ - int err; - - printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); - - err = misc_register(&ds1286_dev); - if (err) - goto out; - - if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) { - err = -ENOMEM; - - goto out_deregister; - } - - return 0; - -out_deregister: - misc_deregister(&ds1286_dev); - -out: - return err; -} - -static void __exit ds1286_exit(void) -{ - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&ds1286_dev); -} - -static char *days[] = { - "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" -}; - -/* - * Info exported via "/proc/rtc". - */ -static int ds1286_proc_output(char *buf) -{ - char *p, *s; - struct rtc_time tm; - unsigned char hundredth, month, cmd, amode; - - p = buf; - - ds1286_get_time(&tm); - hundredth = rtc_read(RTC_HUNDREDTH_SECOND); - hundredth = bcd2bin(hundredth); - - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d.%02d\n" - "rtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); - - /* - * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will - * match any value for that particular field. Values that are - * greater than a valid time, but less than 0xc0 shouldn't appear. - */ - ds1286_get_alm_time(&tm); - p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]); - if (tm.tm_hour <= 24) - p += sprintf(p, "%02d:", tm.tm_hour); - else - p += sprintf(p, "**:"); - - if (tm.tm_min <= 59) - p += sprintf(p, "%02d\n", tm.tm_min); - else - p += sprintf(p, "**\n"); - - month = rtc_read(RTC_MONTH); - p += sprintf(p, - "oscillator\t: %s\n" - "square_wave\t: %s\n", - (month & RTC_EOSC) ? "disabled" : "enabled", - (month & RTC_ESQW) ? "disabled" : "enabled"); - - amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) | - ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) | - ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7); - if (amode == 7) s = "each minute"; - else if (amode == 3) s = "minutes match"; - else if (amode == 1) s = "hours and minutes match"; - else if (amode == 0) s = "days, hours and minutes match"; - else s = "invalid"; - p += sprintf(p, "alarm_mode\t: %s\n", s); - - cmd = rtc_read(RTC_CMD); - p += sprintf(p, - "alarm_enable\t: %s\n" - "wdog_alarm\t: %s\n" - "alarm_mask\t: %s\n" - "wdog_alarm_mask\t: %s\n" - "interrupt_mode\t: %s\n" - "INTB_mode\t: %s_active\n" - "interrupt_pins\t: %s\n", - (cmd & RTC_TDF) ? "yes" : "no", - (cmd & RTC_WAF) ? "yes" : "no", - (cmd & RTC_TDM) ? "disabled" : "enabled", - (cmd & RTC_WAM) ? "disabled" : "enabled", - (cmd & RTC_PU_LVL) ? "pulse" : "level", - (cmd & RTC_IBH_LO) ? "low" : "high", - (cmd & RTC_IPSW) ? "unswapped" : "swapped"); - - return p - buf; -} - -static int ds1286_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = ds1286_proc_output (page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) - len = count; - if (len<0) - len = 0; - - return len; -} - -/* - * Returns true if a clock update is in progress - */ -static inline unsigned char ds1286_is_updating(void) -{ - return rtc_read(RTC_CMD) & RTC_TE; -} - - -static void ds1286_get_time(struct rtc_time *rtc_tm) -{ - unsigned char save_control; - unsigned long flags; - - /* - * read RTC once any update in progress is done. The update - * can take just over 2ms. We wait 10 to 20ms. There is no need to - * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. - * If you need to know *exactly* when a second has started, enable - * periodic update complete interrupts, (via ioctl) and then - * immediately read /dev/rtc which will block until you get the IRQ. - * Once the read clears, read the RTC time (again via ioctl). Easy. - */ - - if (ds1286_is_updating() != 0) - msleep(20); - - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - spin_lock_irqsave(&ds1286_lock, flags); - save_control = rtc_read(RTC_CMD); - rtc_write((save_control|RTC_TE), RTC_CMD); - - rtc_tm->tm_sec = rtc_read(RTC_SECONDS); - rtc_tm->tm_min = rtc_read(RTC_MINUTES); - rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f; - rtc_tm->tm_mday = rtc_read(RTC_DATE); - rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f; - rtc_tm->tm_year = rtc_read(RTC_YEAR); - - rtc_write(save_control, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - if (rtc_tm->tm_year < 45) - rtc_tm->tm_year += 30; - if ((rtc_tm->tm_year += 40) < 70) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} - -static int ds1286_set_time(struct rtc_time *rtc_tm) -{ - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned char save_control; - unsigned int yrs; - unsigned long flags; - - - yrs = rtc_tm->tm_year + 1900; - mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm->tm_mday; - hrs = rtc_tm->tm_hour; - min = rtc_tm->tm_min; - sec = rtc_tm->tm_sec; - - if (yrs < 1970) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ((yrs -= 1940) > 255) /* They are unsigned */ - return -EINVAL; - - if (yrs >= 100) - yrs -= 100; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - spin_lock_irqsave(&ds1286_lock, flags); - save_control = rtc_read(RTC_CMD); - rtc_write((save_control|RTC_TE), RTC_CMD); - - rtc_write(yrs, RTC_YEAR); - rtc_write(mon, RTC_MONTH); - rtc_write(day, RTC_DATE); - rtc_write(hrs, RTC_HOURS); - rtc_write(min, RTC_MINUTES); - rtc_write(sec, RTC_SECONDS); - rtc_write(0, RTC_HUNDREDTH_SECOND); - - rtc_write(save_control, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; -} - -static void ds1286_get_alm_time(struct rtc_time *alm_tm) -{ - unsigned char cmd; - unsigned long flags; - - /* - * Only the values that we read from the RTC are set. That - * means only tm_wday, tm_hour, tm_min. - */ - spin_lock_irqsave(&ds1286_lock, flags); - alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f; - alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM) & 0x1f; - alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM) & 0x07; - cmd = rtc_read(RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - alm_tm->tm_min = bcd2bin(alm_tm->tm_min); - alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour); - alm_tm->tm_sec = 0; -} - -module_init(ds1286_init); -module_exit(ds1286_exit); - -MODULE_AUTHOR("Ralf Baechle"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(RTC_MINOR); diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 408f5f92cb4e..53fdc7ff3870 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -427,9 +427,6 @@ static int hpet_release(struct inode *inode, struct file *file) if (irq) free_irq(irq, devp); - if (file->f_flags & FASYNC) - hpet_fasync(-1, file, 0); - file->private_data = NULL; return 0; } diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c deleted file mode 100644 index 2abd881b4cbc..000000000000 --- a/drivers/char/ip27-rtc.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Driver for the SGS-Thomson M48T35 Timekeeper RAM chip - * - * Real Time Clock interface for Linux - * - * TODO: Implement periodic interrupts. - * - * Copyright (C) 2000 Silicon Graphics, Inc. - * Written by Ulf Carlsson (ulfc@engr.sgi.com) - * - * Based on code written by Paul Gortmaker. - * - * This driver allows use of the real time clock (built into - * nearly all computers) from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the /proc/rtc - * pseudo-file for status information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#define RTC_VERSION "1.09b" - -#include <linux/bcd.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/smp_lock.h> -#include <linux/types.h> -#include <linux/miscdevice.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/rtc.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> - -#include <asm/m48t35.h> -#include <asm/sn/ioc3.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/sn/klconfig.h> -#include <asm/sn/sn0/ip27.h> -#include <asm/sn/sn0/hub.h> -#include <asm/sn/sn_private.h> - -static long rtc_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg); - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -static void get_rtc_time(struct rtc_time *rtc_tm); - -/* - * Bits in rtc_status. (6 bits of room for future expansion) - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ - -static unsigned char rtc_status; /* bitmapped status byte. */ -static unsigned long rtc_freq; /* Current periodic IRQ rate */ -static struct m48t35_rtc *rtc; - -/* - * If this driver ever becomes modularised, it will be really nice - * to make the epoch retain its value across module reload... - */ - -static unsigned long epoch = 1970; /* year corresponding to 0x00 */ - -static const unsigned char days_in_mo[] = -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - - struct rtc_time wtime; - - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - get_rtc_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year + 1900; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - if (yrs < 1970) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ((yrs -= epoch) > 255) /* They are unsigned */ - return -EINVAL; - - if (yrs > 169) - return -EINVAL; - - if (yrs >= 100) - yrs -= 100; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - spin_lock_irq(&rtc_lock); - rtc->control |= M48T35_RTC_SET; - rtc->year = yrs; - rtc->month = mon; - rtc->date = day; - rtc->hour = hrs; - rtc->min = min; - rtc->sec = sec; - rtc->control &= ~M48T35_RTC_SET; - spin_unlock_irq(&rtc_lock); - - return 0; - } - default: - return -EINVAL; - } - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int rtc_open(struct inode *inode, struct file *file) -{ - lock_kernel(); - spin_lock_irq(&rtc_lock); - - if (rtc_status & RTC_IS_OPEN) { - spin_unlock_irq(&rtc_lock); - unlock_kernel(); - return -EBUSY; - } - - rtc_status |= RTC_IS_OPEN; - spin_unlock_irq(&rtc_lock); - unlock_kernel(); - - return 0; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - /* - * Turn off all interrupts once the device is no longer - * in use, and clear the data. - */ - - spin_lock_irq(&rtc_lock); - rtc_status &= ~RTC_IS_OPEN; - spin_unlock_irq(&rtc_lock); - - return 0; -} - -/* - * The various file operations we support. - */ - -static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, -}; - -static struct miscdevice rtc_dev= -{ - RTC_MINOR, - "rtc", - &rtc_fops -}; - -static int __init rtc_init(void) -{ - rtc = (struct m48t35_rtc *) - (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0); - - printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION); - if (misc_register(&rtc_dev)) { - printk(KERN_ERR "rtc: cannot register misc device.\n"); - return -ENODEV; - } - if (!create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)) { - printk(KERN_ERR "rtc: cannot create /proc/rtc.\n"); - misc_deregister(&rtc_dev); - return -ENOENT; - } - - rtc_freq = 1024; - - return 0; -} - -static void __exit rtc_exit (void) -{ - /* interrupts and timer disabled at this point by rtc_release */ - - remove_proc_entry ("rtc", NULL); - misc_deregister(&rtc_dev); -} - -module_init(rtc_init); -module_exit(rtc_exit); - -/* - * Info exported via "/proc/rtc". - */ - -static int rtc_get_status(char *buf) -{ - char *p; - struct rtc_time tm; - - /* - * Just emulate the standard /proc/rtc - */ - - p = buf; - - get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n" - "24hr\t\t: yes\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch); - - return p - buf; -} - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = rtc_get_status(page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) len = count; - if (len<0) len = 0; - return len; -} - -static void get_rtc_time(struct rtc_time *rtc_tm) -{ - /* - * Do we need to wait for the last update to finish? - */ - - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - spin_lock_irq(&rtc_lock); - rtc->control |= M48T35_RTC_READ; - rtc_tm->tm_sec = rtc->sec; - rtc_tm->tm_min = rtc->min; - rtc_tm->tm_hour = rtc->hour; - rtc_tm->tm_mday = rtc->date; - rtc_tm->tm_mon = rtc->month; - rtc_tm->tm_year = rtc->year; - rtc->control &= ~M48T35_RTC_READ; - spin_unlock_irq(&rtc_lock); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - if ((rtc_tm->tm_year += (epoch - 1900)) <= 69) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 835a33c8d5f5..41fc11dc921c 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -162,8 +162,6 @@ static int ipmi_release(struct inode *inode, struct file *file) if (rv) return rv; - ipmi_fasync (-1, file, 0); - /* FIXME - free the messages in the list. */ kfree(priv); @@ -957,3 +955,4 @@ module_exit(cleanup_ipmi); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); MODULE_DESCRIPTION("Linux device interface for the IPMI message handler."); +MODULE_ALIAS("platform:ipmi_si"); diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 8a59aaa21be5..7a88dfd4427b 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -422,9 +422,11 @@ struct ipmi_smi { /** * The driver model view of the IPMI messaging driver. */ -static struct device_driver ipmidriver = { - .name = "ipmi", - .bus = &platform_bus_type +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } }; static DEFINE_MUTEX(ipmidriver_mutex); @@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, * representing the interfaced BMC already */ if (bmc->guid_set) - old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); else - old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id); @@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, snprintf(name, sizeof(name), "ipmi_bmc.%4.4x", bmc->id.product_id); - while (ipmi_find_bmc_prod_dev_id(&ipmidriver, + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id)) { if (!warn_printed) { @@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, " Unable to allocate platform device\n"); return -ENOMEM; } - bmc->dev->dev.driver = &ipmidriver; + bmc->dev->dev.driver = &ipmidriver.driver; dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); @@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void) if (initialized) return 0; - rv = driver_register(&ipmidriver); + rv = driver_register(&ipmidriver.driver); if (rv) { printk(KERN_ERR PFX "Could not register IPMI driver\n"); return rv; @@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void) remove_proc_entry(proc_ipmi_root->name, NULL); #endif /* CONFIG_PROC_FS */ - driver_unregister(&ipmidriver); + driver_unregister(&ipmidriver.driver); initialized = 0; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 3123bf57ad91..3000135f2ead 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = { - .name = DEVICE_NAME, - .bus = &platform_bus_type +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .bus = &platform_bus_type + } }; @@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } new_smi->dev = &new_smi->pdev->dev; - new_smi->dev->driver = &ipmi_driver; + new_smi->dev->driver = &ipmi_driver.driver; rv = platform_device_add(new_smi->pdev); if (rv) { @@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void) initialized = 1; /* Register the device drivers. */ - rv = driver_register(&ipmi_driver); + rv = driver_register(&ipmi_driver.driver); if (rv) { printk(KERN_ERR "init_ipmi_si: Unable to register driver: %d\n", @@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); #endif - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; @@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void) cleanup_one_si(e); mutex_unlock(&smi_infos_lock); - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); } module_exit(cleanup_ipmi_si); diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 235fab0bdf79..a4d57e31f713 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -870,7 +870,6 @@ static int ipmi_close(struct inode *ino, struct file *filep) clear_bit(0, &ipmi_wdog_open); } - ipmi_fasync(-1, filep, 0); expect_close = 0; return 0; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 7d30ee1d3fca..04e4549299ba 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -7,12 +7,14 @@ * Original driver code supplied by Multi-Tech * * Changes - * 1/9/98 alan@redhat.com Merge to 2.0.x kernel tree + * 1/9/98 alan@lxorguk.ukuu.org.uk + * Merge to 2.0.x kernel tree * Obtain and use official major/minors * Loader switched to a misc device * (fixed range check bug as a side effect) * Printk clean up - * 9/12/98 alan@redhat.com Rough port to 2.1.x + * 9/12/98 alan@lxorguk.ukuu.org.uk + * Rough port to 2.1.x * * 10/6/99 sameer Merged the ISA and PCI drivers to * a new unified driver. diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 44e5d60f517e..4b10770fa937 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -3739,7 +3739,7 @@ static int stli_getbrdnr(void) * do is go probing around in the usual places hoping we can find it. */ -static int stli_findeisabrds(void) +static int __init stli_findeisabrds(void) { struct stlibrd *brdp; unsigned int iobase, eid, i; @@ -3935,7 +3935,7 @@ static struct stlibrd *stli_allocbrd(void) * can find. */ -static int stli_initbrds(void) +static int __init stli_initbrds(void) { struct stlibrd *brdp, *nxtbrdp; struct stlconf conf; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 8beef50f95a0..047766915411 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -14,7 +14,8 @@ * (at your option) any later version. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. + * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on + * www.moxa.com. * - Fixed x86_64 cleanness */ diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9a626e50b793..4d64a02612a4 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -554,7 +554,7 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; diff --git a/drivers/char/random.c b/drivers/char/random.c index 705a839f1796..675076f5fca8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1139,18 +1139,12 @@ static int random_fasync(int fd, struct file *filp, int on) return fasync_helper(fd, filp, on, &fasync); } -static int random_release(struct inode *inode, struct file *filp) -{ - return fasync_helper(-1, filp, 0, &fasync); -} - const struct file_operations random_fops = { .read = random_read, .write = random_write, .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; const struct file_operations urandom_fops = { @@ -1158,7 +1152,6 @@ const struct file_operations urandom_fops = { .write = random_write, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; /*************************************************************** diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 32dc89720d58..20d6efb6324e 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -788,8 +788,6 @@ static int rtc_release(struct inode *inode, struct file *file) } spin_unlock_irq(&rtc_lock); - if (file->f_flags & FASYNC) - rtc_fasync(-1, file, 0); no_irq: #endif diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 3b23270eaa65..a8f15e6be594 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) TTY_OVERRUN); /* If the flip buffer itself is - overflowing, we still loose + overflowing, we still lose the next incoming character. */ if (tty_buffer_request_room(tty, 1) != diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb76eeab..f4374437a033 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -523,7 +523,7 @@ static int acpi_driver_registered; static int sonypi_ec_write(u8 addr, u8 value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_write(addr, value); #endif @@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value) static int sonypi_ec_read(u8 addr, u8 *value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_read(addr, value); #endif @@ -898,7 +898,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); mutex_lock(&sonypi_device.lock); sonypi_device.open_count--; mutex_unlock(&sonypi_device.lock); diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 242fd46fda22..a16b94f12eb2 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -72,7 +72,7 @@ /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in - * Documentation/specialix.txt + * Documentation/serial/specialix.txt */ #include <linux/module.h> diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 59f472143f08..1412a8d1e58d 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1795,12 +1795,15 @@ retry_open: } #endif if (device == MKDEV(TTYAUX_MAJOR, 1)) { - driver = tty_driver_kref_get(console_device(&index)); - if (driver) { - /* Don't let /dev/console block */ - filp->f_flags |= O_NONBLOCK; - noctty = 1; - goto got_driver; + struct tty_driver *console_driver = console_device(&index); + if (console_driver) { + driver = tty_driver_kref_get(console_driver); + if (driver) { + /* Don't let /dev/console block */ + filp->f_flags |= O_NONBLOCK; + noctty = 1; + goto got_driver; + } } mutex_unlock(&tty_mutex); return -ENODEV; diff --git a/drivers/char/vt.c b/drivers/char/vt.c index d8f83e26e4a4..008176edbd64 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -1644,7 +1644,10 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = - vc->vc_tab_stop[4] = 0x01010101; + vc->vc_tab_stop[4] = + vc->vc_tab_stop[5] = + vc->vc_tab_stop[6] = + vc->vc_tab_stop[7] = 0x01010101; vc->vc_bell_pitch = DEFAULT_BELL_PITCH; vc->vc_bell_duration = DEFAULT_BELL_DURATION; @@ -1935,7 +1938,10 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = - vc->vc_tab_stop[4] = 0; + vc->vc_tab_stop[4] = + vc->vc_tab_stop[5] = + vc->vc_tab_stop[6] = + vc->vc_tab_stop[7] = 0; } return; case 'm': @@ -2268,7 +2274,7 @@ rescan_last_byte: continue; /* nothing to display */ } /* Glyph not found */ - if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) { + if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) { /* In legacy mode use the glyph we get by a 1:1 mapping. This would make absolutely no sense with Unicode in mind, but do this for ASCII characters since a font may lack diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index aa7f7962a9a0..05d897764f02 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h index 8b0252bf06e2..d4f419ee87ab 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.h +++ b/drivers/char/xilinx_hwicap/buffer_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 776b50528478..02225eb19cf6 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h index 62bda453c90b..4c9dd9a3b62a 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.h +++ b/drivers/char/xilinx_hwicap/fifo_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index ed132fe55d3d..f40ab699860f 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group * (c) Copyright 2007-2008 Xilinx Inc. @@ -626,7 +623,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, if (!request_mem_region(drvdata->mem_start, drvdata->mem_size, DRIVER_NAME)) { dev_err(dev, "Couldn't lock memory region at %Lx\n", - regs_res->start); + (unsigned long long) regs_res->start); retval = -EBUSY; goto failed1; } @@ -645,9 +642,10 @@ static int __devinit hwicap_setup(struct device *dev, int id, mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %lx to %p with size %Lx\n", - (unsigned long int)drvdata->mem_start, - drvdata->base_address, drvdata->mem_size); + dev_info(dev, "ioremap %llx to %p with size %llx\n", + (unsigned long long) drvdata->mem_start, + drvdata->base_address, + (unsigned long long) drvdata->mem_size); cdev_init(&drvdata->cdev, &hwicap_fops); drvdata->cdev.owner = THIS_MODULE; diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index 24d0d9b938fb..8cca11981c5f 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2007 Xilinx Inc. * All rights reserved. * |