diff options
Diffstat (limited to 'drivers/clk/clk-versaclock5.c')
| -rw-r--r-- | drivers/clk/clk-versaclock5.c | 791 |
1 files changed, 791 insertions, 0 deletions
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c new file mode 100644 index 000000000000..56741f3cf0a3 --- /dev/null +++ b/drivers/clk/clk-versaclock5.c @@ -0,0 +1,791 @@ +/* + * Driver for IDT Versaclock 5 + * + * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Possible optimizations: + * - Use spread spectrum + * - Use integer divider in FOD if applicable + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/rational.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* VersaClock5 registers */ +#define VC5_OTP_CONTROL 0x00 + +/* Factory-reserved register block */ +#define VC5_RSVD_DEVICE_ID 0x01 +#define VC5_RSVD_ADC_GAIN_7_0 0x02 +#define VC5_RSVD_ADC_GAIN_15_8 0x03 +#define VC5_RSVD_ADC_OFFSET_7_0 0x04 +#define VC5_RSVD_ADC_OFFSET_15_8 0x05 +#define VC5_RSVD_TEMPY 0x06 +#define VC5_RSVD_OFFSET_TBIN 0x07 +#define VC5_RSVD_GAIN 0x08 +#define VC5_RSVD_TEST_NP 0x09 +#define VC5_RSVD_UNUSED 0x0a +#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b +#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c +#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d +#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e +#define VC5_RSVD_CLK_AMP_123 0x0f + +/* Configuration register block */ +#define VC5_PRIM_SRC_SHDN 0x10 +#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7) +#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6) +#define VC5_PRIM_SRC_SHDN_SP BIT(1) +#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0) + +#define VC5_VCO_BAND 0x11 +#define VC5_XTAL_X1_LOAD_CAP 0x12 +#define VC5_XTAL_X2_LOAD_CAP 0x13 +#define VC5_REF_DIVIDER 0x15 +#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7) +#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f) + +#define VC5_VCO_CTRL_AND_PREDIV 0x16 +#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7) + +#define VC5_FEEDBACK_INT_DIV 0x17 +#define VC5_FEEDBACK_INT_DIV_BITS 0x18 +#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n)) +#define VC5_RC_CONTROL0 0x1e +#define VC5_RC_CONTROL1 0x1f +/* Register 0x20 is factory reserved */ + +/* Output divider control for divider 1,2,3,4 */ +#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10)) +#define VC5_OUT_DIV_CONTROL_RESET BIT(7) +#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3) +#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2) +#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1) +#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0) + +#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1) + +#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10)) +/* Registers 0x30, 0x40, 0x50 are factory reserved */ + +/* Clock control register for clock 1,2 */ +#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n)) +#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0) + +#define VC5_CLK_OE_SHDN 0x68 +#define VC5_CLK_OS_SHDN 0x69 + +#define VC5_GLOBAL_REGISTER 0x76 +#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5) + +/* PLL/VCO runs between 2.5 GHz and 3.0 GHz */ +#define VC5_PLL_VCO_MIN 2500000000UL +#define VC5_PLL_VCO_MAX 3000000000UL + +/* VC5 Input mux settings */ +#define VC5_MUX_IN_XIN BIT(0) +#define VC5_MUX_IN_CLKIN BIT(1) + +/* Supported IDT VC5 models. */ +enum vc5_model { + IDT_VC5_5P49V5923, + IDT_VC5_5P49V5933, +}; + +struct vc5_driver_data; + +struct vc5_hw_data { + struct clk_hw hw; + struct vc5_driver_data *vc5; + u32 div_int; + u32 div_frc; + unsigned int num; +}; + +struct vc5_driver_data { + struct i2c_client *client; + struct regmap *regmap; + enum vc5_model model; + + struct clk *pin_xin; + struct clk *pin_clkin; + unsigned char clk_mux_ins; + struct clk_hw clk_mux; + struct vc5_hw_data clk_pll; + struct vc5_hw_data clk_fod[2]; + struct vc5_hw_data clk_out[3]; +}; + +static const char * const vc5_mux_names[] = { + "mux" +}; + +static const char * const vc5_pll_names[] = { + "pll" +}; + +static const char * const vc5_fod_names[] = { + "fod0", "fod1", "fod2", "fod3", +}; + +static const char * const vc5_clk_out_names[] = { + "out0_sel_i2cb", "out1", "out2", "out3", "out4", +}; + +/* + * VersaClock5 i2c regmap + */ +static bool vc5_regmap_is_writeable(struct device *dev, unsigned int reg) +{ + /* Factory reserved regs, make them read-only */ + if (reg <= 0xf) + return false; + + /* Factory reserved regs, make them read-only */ + if (reg == 0x14 || reg == 0x1c || reg == 0x1d) + return false; + + return true; +} + +static const struct regmap_config vc5_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = 0x76, + .writeable_reg = vc5_regmap_is_writeable, +}; + +/* + * VersaClock5 input multiplexer between XTAL and CLKIN divider + */ +static unsigned char vc5_mux_get_parent(struct clk_hw *hw) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mux); + const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN; + unsigned int src; + + regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src); + src &= mask; + + if (src == VC5_PRIM_SRC_SHDN_EN_XTAL) + return 0; + + if (src == VC5_PRIM_SRC_SHDN_EN_CLKIN) + return 1; + + dev_warn(&vc5->client->dev, + "Invalid clock input configuration (%02x)\n", src); + return 0; +} + +static int vc5_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mux); + const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN; + u8 src; + + if ((index > 1) || !vc5->clk_mux_ins) + return -EINVAL; + + if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) { + if (index == 0) + src = VC5_PRIM_SRC_SHDN_EN_XTAL; + if (index == 1) + src = VC5_PRIM_SRC_SHDN_EN_CLKIN; + } else { + if (index != 0) + return -EINVAL; + + if (vc5->clk_mux_ins == VC5_MUX_IN_XIN) + src = VC5_PRIM_SRC_SHDN_EN_XTAL; + if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN) + src = VC5_PRIM_SRC_SHDN_EN_CLKIN; + } + + return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src); +} + +static unsigned long vc5_mux_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mux); + unsigned int prediv, div; + + regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv); + + /* The bypass_prediv is set, PLL fed from Ref_in directly. */ + if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV) + return parent_rate; + + regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div); + + /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */ + if (div & VC5_REF_DIVIDER_SEL_PREDIV2) + return parent_rate / 2; + else + return parent_rate / VC5_REF_DIVIDER_REF_DIV(div); +} + +static long vc5_mux_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long idiv; + + /* PLL cannot operate with input clock above 50 MHz. */ + if (rate > 50000000) + return -EINVAL; + + /* CLKIN within range of PLL input, feed directly to PLL. */ + if (*parent_rate <= 50000000) + return *parent_rate; + + idiv = DIV_ROUND_UP(*parent_rate, rate); + if (idiv > 127) + return -EINVAL; + + return *parent_rate / idiv; +} + +static int vc5_mux_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mux); + unsigned long idiv; + u8 div; + + /* CLKIN within range of PLL input, feed directly to PLL. */ + if (parent_rate <= 50000000) { + regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV); + regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00); + return 0; + } + + idiv = DIV_ROUND_UP(parent_rate, rate); + + /* We have dedicated div-2 predivider. */ + if (idiv == 2) + div = VC5_REF_DIVIDER_SEL_PREDIV2; + else + div = VC5_REF_DIVIDER_REF_DIV(idiv); + + regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div); + regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0); + + return 0; +} + +static const struct clk_ops vc5_mux_ops = { + .set_parent = vc5_mux_set_parent, + .get_parent = vc5_mux_get_parent, + .recalc_rate = vc5_mux_recalc_rate, + .round_rate = vc5_mux_round_rate, + .set_rate = vc5_mux_set_rate, +}; + +/* + * VersaClock5 PLL/VCO + */ +static unsigned long vc5_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u32 div_int, div_frc; + u8 fb[5]; + + regmap_bulk_read(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5); + + div_int = (fb[0] << 4) | (fb[1] >> 4); + div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4]; + + /* The PLL divider has 12 integer bits and 24 fractional bits */ + return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24); +} + +static long vc5_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + u32 div_int; + u64 div_frc; + + if (rate < VC5_PLL_VCO_MIN) + rate = VC5_PLL_VCO_MIN; + if (rate > VC5_PLL_VCO_MAX) + rate = VC5_PLL_VCO_MAX; + + /* Determine integer part, which is 12 bit wide */ + div_int = rate / *parent_rate; + if (div_int > 0xfff) + rate = *parent_rate * 0xfff; + + /* Determine best fractional part, which is 24 bit wide */ + div_frc = rate % *parent_rate; + div_frc *= BIT(24) - 1; + do_div(div_frc, *parent_rate); + + hwdata->div_int = div_int; + hwdata->div_frc = (u32)div_frc; + + return (*parent_rate * div_int) + ((*parent_rate * div_frc) >> 24); +} + +static int vc5_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u8 fb[5]; + + fb[0] = hwdata->div_int >> 4; + fb[1] = hwdata->div_int << 4; + fb[2] = hwdata->div_frc >> 16; + fb[3] = hwdata->div_frc >> 8; + fb[4] = hwdata->div_frc; + + return regmap_bulk_write(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5); +} + +static const struct clk_ops vc5_pll_ops = { + .recalc_rate = vc5_pll_recalc_rate, + .round_rate = vc5_pll_round_rate, + .set_rate = vc5_pll_set_rate, +}; + +static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + /* VCO frequency is divided by two before entering FOD */ + u32 f_in = parent_rate / 2; + u32 div_int, div_frc; + u8 od_int[2]; + u8 od_frc[4]; + + regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_INT(hwdata->num, 0), + od_int, 2); + regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0), + od_frc, 4); + + div_int = (od_int[0] << 4) | (od_int[1] >> 4); + div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) | + (od_frc[2] << 6) | (od_frc[3] >> 2); + + /* The PLL divider has 12 integer bits and 30 fractional bits */ + return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); +} + +static long vc5_fod_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + /* VCO frequency is divided by two before entering FOD */ + u32 f_in = *parent_rate / 2; + u32 div_int; + u64 div_frc; + + /* Determine integer part, which is 12 bit wide */ + div_int = f_in / rate; + /* + * WARNING: The clock chip does not output signal if the integer part + * of the divider is 0xfff and fractional part is non-zero. + * Clamp the divider at 0xffe to keep the code simple. + */ + if (div_int > 0xffe) { + div_int = 0xffe; + rate = f_in / div_int; + } + + /* Determine best fractional part, which is 30 bit wide */ + div_frc = f_in % rate; + div_frc <<= 24; + do_div(div_frc, rate); + + hwdata->div_int = div_int; + hwdata->div_frc = (u32)div_frc; + + return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); +} + +static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u8 data[14] = { + hwdata->div_frc >> 22, hwdata->div_frc >> 14, + hwdata->div_frc >> 6, hwdata->div_frc << 2, + 0, 0, 0, 0, 0, + 0, 0, + hwdata->div_int >> 4, hwdata->div_int << 4, + 0 + }; + + regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0), + data, 14); + + /* + * Toggle magic bit in undocumented register for unknown reason. + * This is what the IDT timing commander tool does and the chip + * datasheet somewhat implies this is needed, but the register + * and the bit is not documented. + */ + regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER, + VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0); + regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER, + VC5_GLOBAL_REGISTER_GLOBAL_RESET, + VC5_GLOBAL_REGISTER_GLOBAL_RESET); + return 0; +} + +static const struct clk_ops vc5_fod_ops = { + .recalc_rate = vc5_fod_recalc_rate, + .round_rate = vc5_fod_round_rate, + .set_rate = vc5_fod_set_rate, +}; + +static int vc5_clk_out_prepare(struct clk_hw *hw) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + + /* Enable the clock buffer */ + regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); + return 0; +} + +static void vc5_clk_out_unprepare(struct clk_hw *hw) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + + /* Enable the clock buffer */ + regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0); +} + +static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 fodclkmask = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT; + unsigned int src; + + regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src); + src &= mask; + + if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD) + return 0; + + if (src == extclk) + return 1; + + dev_warn(&vc5->client->dev, + "Invalid clock output configuration (%02x)\n", src); + return 0; +} + +static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + const u8 mask = VC5_OUT_DIV_CONTROL_RESET | + VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT; + u8 src = VC5_OUT_DIV_CONTROL_RESET; + + if (index == 0) + src |= VC5_OUT_DIV_CONTROL_EN_FOD; + else + src |= extclk; + + return regmap_update_bits(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), + mask, src); +} + +static const struct clk_ops vc5_clk_out_ops = { + .prepare = vc5_clk_out_prepare, + .unprepare = vc5_clk_out_unprepare, + .set_parent = vc5_clk_out_set_parent, + .get_parent = vc5_clk_out_get_parent, +}; + +static struct clk_hw *vc5_of_clk_get(struct of_phandle_args *clkspec, + void *data) +{ + struct vc5_driver_data *vc5 = data; + unsigned int idx = clkspec->args[0]; + + if (idx > 2) + return ERR_PTR(-EINVAL); + + return &vc5->clk_out[idx].hw; +} + +static int vc5_map_index_to_output(const enum vc5_model model, + const unsigned int n) +{ + switch (model) { + case IDT_VC5_5P49V5933: + return (n == 0) ? 0 : 3; + case IDT_VC5_5P49V5923: + default: + return n; + } +} + +static const struct of_device_id clk_vc5_of_match[]; + +static int vc5_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct of_device_id *of_id = + of_match_device(clk_vc5_of_match, &client->dev); + struct vc5_driver_data *vc5; + struct clk_init_data init; + const char *parent_names[2]; + unsigned int n, idx; + int ret; + + vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL); + if (vc5 == NULL) + return -ENOMEM; + + i2c_set_clientdata(client, vc5); + vc5->client = client; + vc5->model = (enum vc5_model)of_id->data; + + vc5->pin_xin = devm_clk_get(&client->dev, "xin"); + if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + vc5->pin_clkin = devm_clk_get(&client->dev, "clkin"); + if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config); + if (IS_ERR(vc5->regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(vc5->regmap); + } + + /* Register clock input mux */ + memset(&init, 0, sizeof(init)); + + if (!IS_ERR(vc5->pin_xin)) { + vc5->clk_mux_ins |= VC5_MUX_IN_XIN; + parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin); + } else if (vc5->model == IDT_VC5_5P49V5933) { + /* IDT VC5 5P49V5933 has built-in oscilator. */ + vc5->pin_xin = clk_register_fixed_rate(&client->dev, + "internal-xtal", NULL, + 0, 25000000); + if (IS_ERR(vc5->pin_xin)) + return PTR_ERR(vc5->pin_xin); + vc5->clk_mux_ins |= VC5_MUX_IN_XIN; + parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin); + } + + if (!IS_ERR(vc5->pin_clkin)) { + vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN; + parent_names[init.num_parents++] = + __clk_get_name(vc5->pin_clkin); + } + + if (!init.num_parents) { + dev_err(&client->dev, "no input clock specified!\n"); + return -EINVAL; + } + + init.name = vc5_mux_names[0]; + init.ops = &vc5_mux_ops; + init.flags = 0; + init.parent_names = parent_names; + vc5->clk_mux.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux); + if (ret) { + dev_err(&client->dev, "unable to register %s\n", init.name); + goto err_clk; + } + + /* Register PLL */ + memset(&init, 0, sizeof(init)); + init.name = vc5_pll_names[0]; + init.ops = &vc5_pll_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = vc5_mux_names; + init.num_parents = 1; + vc5->clk_pll.num = 0; + vc5->clk_pll.vc5 = vc5; + vc5->clk_pll.hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw); + if (ret) { + dev_err(&client->dev, "unable to register %s\n", init.name); + goto err_clk; + } + + /* Register FODs */ + for (n = 0; n < 2; n++) { + idx = vc5_map_index_to_output(vc5->model, n); + memset(&init, 0, sizeof(init)); + init.name = vc5_fod_names[idx]; + init.ops = &vc5_fod_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = vc5_pll_names; + init.num_parents = 1; + vc5->clk_fod[n].num = idx; + vc5->clk_fod[n].vc5 = vc5; + vc5->clk_fod[n].hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw); + if (ret) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + goto err_clk; + } + } + + /* Register MUX-connected OUT0_I2C_SELB output */ + memset(&init, 0, sizeof(init)); + init.name = vc5_clk_out_names[0]; + init.ops = &vc5_clk_out_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = vc5_mux_names; + init.num_parents = 1; + vc5->clk_out[0].num = idx; + vc5->clk_out[0].vc5 = vc5; + vc5->clk_out[0].hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw); + if (ret) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + goto err_clk; + } + + /* Register FOD-connected OUTx outputs */ + for (n = 1; n < 3; n++) { + idx = vc5_map_index_to_output(vc5->model, n - 1); + parent_names[0] = vc5_fod_names[idx]; + if (n == 1) + parent_names[1] = vc5_mux_names[0]; + else + parent_names[1] = vc5_clk_out_names[n - 1]; + + memset(&init, 0, sizeof(init)); + init.name = vc5_clk_out_names[idx + 1]; + init.ops = &vc5_clk_out_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = 2; + vc5->clk_out[n].num = idx; + vc5->clk_out[n].vc5 = vc5; + vc5->clk_out[n].hw.init = &init; + ret = devm_clk_hw_register(&client->dev, + &vc5->clk_out[n].hw); + if (ret) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + goto err_clk; + } + } + + ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5); + if (ret) { + dev_err(&client->dev, "unable to add clk provider\n"); + goto err_clk; + } + + return 0; + +err_clk: + if (vc5->model == IDT_VC5_5P49V5933) + clk_unregister_fixed_rate(vc5->pin_xin); + return ret; +} + +static int vc5_remove(struct i2c_client *client) +{ + struct vc5_driver_data *vc5 = i2c_get_clientdata(client); + + of_clk_del_provider(client->dev.of_node); + + if (vc5->model == IDT_VC5_5P49V5933) + clk_unregister_fixed_rate(vc5->pin_xin); + + return 0; +} + +static const struct i2c_device_id vc5_id[] = { + { "5p49v5923", .driver_data = IDT_VC5_5P49V5923 }, + { "5p49v5933", .driver_data = IDT_VC5_5P49V5933 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vc5_id); + +static const struct of_device_id clk_vc5_of_match[] = { + { .compatible = "idt,5p49v5923", .data = (void *)IDT_VC5_5P49V5923 }, + { .compatible = "idt,5p49v5933", .data = (void *)IDT_VC5_5P49V5933 }, + { }, +}; +MODULE_DEVICE_TABLE(of, clk_vc5_of_match); + +static struct i2c_driver vc5_driver = { + .driver = { + .name = "vc5", + .of_match_table = clk_vc5_of_match, + }, + .probe = vc5_probe, + .remove = vc5_remove, + .id_table = vc5_id, +}; +module_i2c_driver(vc5_driver); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("IDT VersaClock 5 driver"); +MODULE_LICENSE("GPL"); |