diff options
Diffstat (limited to 'drivers/clk')
-rw-r--r-- | drivers/clk/Makefile | 2 | ||||
-rw-r--r-- | drivers/clk/clk-bcm2835.c | 59 | ||||
-rw-r--r-- | drivers/clk/clk-vt8500.c | 510 | ||||
-rw-r--r-- | drivers/clk/mxs/Makefile | 2 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-imx23.c | 57 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-imx28.c | 115 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-ssp.c | 62 | ||||
-rw-r--r-- | drivers/clk/ux500/u8500_clk.c | 50 |
8 files changed, 702 insertions, 155 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b7b862077d88..71a25b91de00 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o # SoCs specific +obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_ARCH_MXS) += mxs/ @@ -17,6 +18,7 @@ obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ +obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c new file mode 100644 index 000000000000..67ad16b20b81 --- /dev/null +++ b/drivers/clk/clk-bcm2835.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2010 Broadcom + * Copyright (C) 2012 Stephen Warren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/bcm2835.h> + +/* + * These are fixed clocks. They're probably not all root clocks and it may + * be possible to turn them on and off but until this is mapped out better + * it's the only way they can be used. + */ +void __init bcm2835_init_clocks(void) +{ + struct clk *clk; + int ret; + + clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT, + 250000000); + if (!clk) + pr_err("sys_pclk not registered\n"); + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, + 126000000); + if (!clk) + pr_err("apb_pclk not registered\n"); + + clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT, + 3000000); + if (!clk) + pr_err("uart0_pclk not registered\n"); + ret = clk_register_clkdev(clk, NULL, "20201000.uart"); + if (ret) + pr_err("uart0_pclk alias not registered\n"); + + clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT, + 125000000); + if (!clk) + pr_err("uart1_pclk not registered\n"); + ret = clk_register_clkdev(clk, NULL, "20215000.uart"); + if (ret) + pr_err("uart0_pclk alias not registered\n"); +} diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c new file mode 100644 index 000000000000..a885600f5270 --- /dev/null +++ b/drivers/clk/clk-vt8500.c @@ -0,0 +1,510 @@ +/* + * Clock implementation for VIA/Wondermedia SoC's + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> + +/* All clocks share the same lock as none can be changed concurrently */ +static DEFINE_SPINLOCK(_lock); + +struct clk_device { + struct clk_hw hw; + void __iomem *div_reg; + unsigned int div_mask; + void __iomem *en_reg; + int en_bit; + spinlock_t *lock; +}; + +/* + * Add new PLL_TYPE_x definitions here as required. Use the first known model + * to support the new type as the name. + * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and + * vtwm_pll_set_rate() to handle the new PLL_TYPE_x + */ + +#define PLL_TYPE_VT8500 0 +#define PLL_TYPE_WM8650 1 + +struct clk_pll { + struct clk_hw hw; + void __iomem *reg; + spinlock_t *lock; + int type; +}; + +static void __iomem *pmc_base; + +#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw) + +#define VT8500_PMC_BUSY_MASK 0x18 + +static void vt8500_pmc_wait_busy(void) +{ + while (readl(pmc_base) & VT8500_PMC_BUSY_MASK) + cpu_relax(); +} + +static int vt8500_dclk_enable(struct clk_hw *hw) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 en_val; + unsigned long flags = 0; + + spin_lock_irqsave(cdev->lock, flags); + + en_val = readl(cdev->en_reg); + en_val |= BIT(cdev->en_bit); + writel(en_val, cdev->en_reg); + + spin_unlock_irqrestore(cdev->lock, flags); + return 0; +} + +static void vt8500_dclk_disable(struct clk_hw *hw) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 en_val; + unsigned long flags = 0; + + spin_lock_irqsave(cdev->lock, flags); + + en_val = readl(cdev->en_reg); + en_val &= ~BIT(cdev->en_bit); + writel(en_val, cdev->en_reg); + + spin_unlock_irqrestore(cdev->lock, flags); +} + +static int vt8500_dclk_is_enabled(struct clk_hw *hw) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit)); + + return en_val ? 1 : 0; +} + +static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 div = readl(cdev->div_reg) & cdev->div_mask; + + /* Special case for SDMMC devices */ + if ((cdev->div_mask == 0x3F) && (div & BIT(5))) + div = 64 * (div & 0x1f); + + /* div == 0 is actually the highest divisor */ + if (div == 0) + div = (cdev->div_mask + 1); + + return parent_rate / div; +} + +static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 divisor = *prate / rate; + + return *prate / divisor; +} + +static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 divisor = parent_rate / rate; + unsigned long flags = 0; + + if (divisor == cdev->div_mask + 1) + divisor = 0; + + if (divisor > cdev->div_mask) { + pr_err("%s: invalid divisor for clock\n", __func__); + return -EINVAL; + } + + spin_lock_irqsave(cdev->lock, flags); + + vt8500_pmc_wait_busy(); + writel(divisor, cdev->div_reg); + vt8500_pmc_wait_busy(); + + spin_lock_irqsave(cdev->lock, flags); + + return 0; +} + + +static const struct clk_ops vt8500_gated_clk_ops = { + .enable = vt8500_dclk_enable, + .disable = vt8500_dclk_disable, + .is_enabled = vt8500_dclk_is_enabled, +}; + +static const struct clk_ops vt8500_divisor_clk_ops = { + .round_rate = vt8500_dclk_round_rate, + .set_rate = vt8500_dclk_set_rate, + .recalc_rate = vt8500_dclk_recalc_rate, +}; + +static const struct clk_ops vt8500_gated_divisor_clk_ops = { + .enable = vt8500_dclk_enable, + .disable = vt8500_dclk_disable, + .is_enabled = vt8500_dclk_is_enabled, + .round_rate = vt8500_dclk_round_rate, + .set_rate = vt8500_dclk_set_rate, + .recalc_rate = vt8500_dclk_recalc_rate, +}; + +#define CLK_INIT_GATED BIT(0) +#define CLK_INIT_DIVISOR BIT(1) +#define CLK_INIT_GATED_DIVISOR (CLK_INIT_DIVISOR | CLK_INIT_GATED) + +static __init void vtwm_device_clk_init(struct device_node *node) +{ + u32 en_reg, div_reg; + struct clk *clk; + struct clk_device *dev_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + int clk_init_flags = 0; + + dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL); + if (WARN_ON(!dev_clk)) + return; + + dev_clk->lock = &_lock; + + rc = of_property_read_u32(node, "enable-reg", &en_reg); + if (!rc) { + dev_clk->en_reg = pmc_base + en_reg; + rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit); + if (rc) { + pr_err("%s: enable-bit property required for gated clock\n", + __func__); + return; + } + clk_init_flags |= CLK_INIT_GATED; + } + + rc = of_property_read_u32(node, "divisor-reg", &div_reg); + if (!rc) { + dev_clk->div_reg = pmc_base + div_reg; + /* + * use 0x1f as the default mask since it covers + * almost all the clocks and reduces dts properties + */ + dev_clk->div_mask = 0x1f; + + of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask); + clk_init_flags |= CLK_INIT_DIVISOR; + } + + of_property_read_string(node, "clock-output-names", &clk_name); + + switch (clk_init_flags) { + case CLK_INIT_GATED: + init.ops = &vt8500_gated_clk_ops; + break; + case CLK_INIT_DIVISOR: + init.ops = &vt8500_divisor_clk_ops; + break; + case CLK_INIT_GATED_DIVISOR: + init.ops = &vt8500_gated_divisor_clk_ops; + break; + default: + pr_err("%s: Invalid clock description in device tree\n", + __func__); + kfree(dev_clk); + return; + } + + init.name = clk_name; + init.flags = 0; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + dev_clk->hw.init = &init; + + clk = clk_register(NULL, &dev_clk->hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(dev_clk); + return; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); +} + + +/* PLL clock related functions */ + +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +/* Helper macros for PLL_VT8500 */ +#define VT8500_PLL_MUL(x) ((x & 0x1F) << 1) +#define VT8500_PLL_DIV(x) ((x & 0x100) ? 1 : 2) + +#define VT8500_BITS_TO_FREQ(r, m, d) \ + ((r / d) * m) + +#define VT8500_BITS_TO_VAL(m, d) \ + ((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F)) + +/* Helper macros for PLL_WM8650 */ +#define WM8650_PLL_MUL(x) (x & 0x3FF) +#define WM8650_PLL_DIV(x) (((x >> 10) & 7) * (1 << ((x >> 13) & 3))) + +#define WM8650_BITS_TO_FREQ(r, m, d1, d2) \ + (r * m / (d1 * (1 << d2))) + +#define WM8650_BITS_TO_VAL(m, d1, d2) \ + ((d2 << 13) | (d1 << 10) | (m & 0x3FF)) + + +static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate, + u32 *multiplier, u32 *prediv) +{ + unsigned long tclk; + + /* sanity check */ + if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) { + pr_err("%s: requested rate out of range\n", __func__); + *multiplier = 0; + *prediv = 1; + return; + } + if (rate <= parent_rate * 31) + /* use the prediv to double the resolution */ + *prediv = 2; + else + *prediv = 1; + + *multiplier = rate / (parent_rate / *prediv); + tclk = (parent_rate / *prediv) * *multiplier; + + if (tclk != rate) + pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, + rate, tclk); +} + +static void wm8650_find_pll_bits(unsigned long rate, unsigned long parent_rate, + u32 *multiplier, u32 *divisor1, u32 *divisor2) +{ + u32 mul, div1, div2; + u32 best_mul, best_div1, best_div2; + unsigned long tclk, rate_err, best_err; + + best_err = (unsigned long)-1; + + /* Find the closest match (lower or equal to requested) */ + for (div1 = 5; div1 >= 3; div1--) + for (div2 = 3; div2 >= 0; div2--) + for (mul = 3; mul <= 1023; mul++) { + tclk = parent_rate * mul / (div1 * (1 << div2)); + if (tclk > rate) + continue; + /* error will always be +ve */ + rate_err = rate - tclk; + if (rate_err == 0) { + *multiplier = mul; + *divisor1 = div1; + *divisor2 = div2; + return; + } + + if (rate_err < best_err) { + best_err = rate_err; + best_mul = mul; + best_div1 = div1; + best_div2 = div2; + } + } + + /* if we got here, it wasn't an exact match */ + pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, + rate - best_err); + *multiplier = mul; + *divisor1 = div1; + *divisor2 = div2; +} + +static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + u32 mul, div1, div2; + u32 pll_val; + unsigned long flags = 0; + + /* sanity check */ + + switch (pll->type) { + case PLL_TYPE_VT8500: + vt8500_find_pll_bits(rate, parent_rate, &mul, &div1); + pll_val = VT8500_BITS_TO_VAL(mul, div1); + break; + case PLL_TYPE_WM8650: + wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2); + pll_val = WM8650_BITS_TO_VAL(mul, div1, div2); + break; + default: + pr_err("%s: invalid pll type\n", __func__); + return 0; + } + + spin_lock_irqsave(pll->lock, flags); + + vt8500_pmc_wait_busy(); + writel(pll_val, pll->reg); + vt8500_pmc_wait_busy(); + + spin_unlock_irqrestore(pll->lock, flags); + + return 0; +} + +static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_pll *pll = to_clk_pll(hw); + u32 mul, div1, div2; + long round_rate; + + switch (pll->type) { + case PLL_TYPE_VT8500: + vt8500_find_pll_bits(rate, *prate, &mul, &div1); + round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1); + break; + case PLL_TYPE_WM8650: + wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2); + round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2); + break; + default: + round_rate = 0; + } + + return round_rate; +} + +static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + u32 pll_val = readl(pll->reg); + unsigned long pll_freq; + + switch (pll->type) { + case PLL_TYPE_VT8500: + pll_freq = parent_rate * VT8500_PLL_MUL(pll_val); + pll_freq /= VT8500_PLL_DIV(pll_val); + break; + case PLL_TYPE_WM8650: + pll_freq = parent_rate * WM8650_PLL_MUL(pll_val); + pll_freq /= WM8650_PLL_DIV(pll_val); + break; + default: + pll_freq = 0; + } + + return pll_freq; +} + +const struct clk_ops vtwm_pll_ops = { + .round_rate = vtwm_pll_round_rate, + .set_rate = vtwm_pll_set_rate, + .recalc_rate = vtwm_pll_recalc_rate, +}; + +static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type) +{ + u32 reg; + struct clk *clk; + struct clk_pll *pll_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + + rc = of_property_read_u32(node, "reg", ®); + if (WARN_ON(rc)) + return; + + pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); + if (WARN_ON(!pll_clk)) + return; + + pll_clk->reg = pmc_base + reg; + pll_clk->lock = &_lock; + pll_clk->type = pll_type; + + of_property_read_string(node, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = &vtwm_pll_ops; + init.flags = 0; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + pll_clk->hw.init = &init; + + clk = clk_register(NULL, &pll_clk->hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(pll_clk); + return; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); +} + + +/* Wrappers for initialization functions */ + +static void __init vt8500_pll_init(struct device_node *node) +{ + vtwm_pll_clk_init(node, PLL_TYPE_VT8500); +} + +static void __init wm8650_pll_init(struct device_node *node) +{ + vtwm_pll_clk_init(node, PLL_TYPE_WM8650); +} + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, }, + { .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, }, + { .compatible = "via,vt8500-device-clock", + .data = vtwm_device_clk_init, }, + { /* sentinel */ } +}; + +void __init vtwm_clk_init(void __iomem *base) +{ + if (!base) + return; + + pmc_base = base; + + of_clk_init(clk_match); +} diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile index 7bedeec08524..a6a22237e860 100644 --- a/drivers/clk/mxs/Makefile +++ b/drivers/clk/mxs/Makefile @@ -2,7 +2,7 @@ # Makefile for mxs specific clk # -obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o +obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o obj-$(CONFIG_SOC_IMX23) += clk-imx23.o obj-$(CONFIG_SOC_IMX28) += clk-imx28.o diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index 844043ad0fe4..f00dffb9ad60 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/common.h> #include <mach/mx23.h> #include "clk.h" @@ -71,44 +72,6 @@ static void __init clk_misc_init(void) __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); } -static struct clk_lookup uart_lookups[] = { - { .dev_id = "duart", }, - { .dev_id = "mxs-auart.0", }, - { .dev_id = "mxs-auart.1", }, - { .dev_id = "8006c000.serial", }, - { .dev_id = "8006e000.serial", }, - { .dev_id = "80070000.serial", }, -}; - -static struct clk_lookup hbus_lookups[] = { - { .dev_id = "imx23-dma-apbh", }, - { .dev_id = "80004000.dma-apbh", }, -}; - -static struct clk_lookup xbus_lookups[] = { - { .dev_id = "duart", .con_id = "apb_pclk"}, - { .dev_id = "80070000.serial", .con_id = "apb_pclk"}, - { .dev_id = "imx23-dma-apbx", }, - { .dev_id = "80024000.dma-apbx", }, -}; - -static struct clk_lookup ssp_lookups[] = { - { .dev_id = "imx23-mmc.0", }, - { .dev_id = "imx23-mmc.1", }, - { .dev_id = "80010000.ssp", }, - { .dev_id = "80034000.ssp", }, -}; - -static struct clk_lookup lcdif_lookups[] = { - { .dev_id = "imx23-fb", }, - { .dev_id = "80030000.lcdif", }, -}; - -static struct clk_lookup gpmi_lookups[] = { - { .dev_id = "imx23-gpmi-nand", }, - { .dev_id = "8000c000.gpmi-nand", }, -}; - static const char *sel_pll[] __initconst = { "pll", "ref_xtal", }; static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", }; static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", }; @@ -127,6 +90,7 @@ enum imx23_clk { }; static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; static enum imx23_clk clks_init_on[] __initdata = { cpu, hbus, xbus, emi, uart, @@ -134,6 +98,7 @@ static enum imx23_clk clks_init_on[] __initdata = { int __init mx23_clocks_init(void) { + struct device_node *np; int i; clk_misc_init(); @@ -188,19 +153,19 @@ int __init mx23_clocks_init(void) return PTR_ERR(clks[i]); } + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); + if (np) { + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clks[clk32k], NULL, "timrot"); - clk_register_clkdev(clks[pwm], NULL, "80064000.pwm"); - clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); - clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); - clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); - clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups)); - clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups)); - clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups)); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - mxs_timer_init(MX23_INT_TIMER0); + mxs_timer_init(); return 0; } diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index e3aab67b3eb7..42978f1b4bd2 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/common.h> #include <mach/mx28.h> #include "clk.h" @@ -120,90 +121,6 @@ static void __init clk_misc_init(void) writel_relaxed(val, FRAC0); } -static struct clk_lookup uart_lookups[] = { - { .dev_id = "duart", }, - { .dev_id = "mxs-auart.0", }, - { .dev_id = "mxs-auart.1", }, - { .dev_id = "mxs-auart.2", }, - { .dev_id = "mxs-auart.3", }, - { .dev_id = "mxs-auart.4", }, - { .dev_id = "8006a000.serial", }, - { .dev_id = "8006c000.serial", }, - { .dev_id = "8006e000.serial", }, - { .dev_id = "80070000.serial", }, - { .dev_id = "80072000.serial", }, - { .dev_id = "80074000.serial", }, -}; - -static struct clk_lookup hbus_lookups[] = { - { .dev_id = "imx28-dma-apbh", }, - { .dev_id = "80004000.dma-apbh", }, -}; - -static struct clk_lookup xbus_lookups[] = { - { .dev_id = "duart", .con_id = "apb_pclk"}, - { .dev_id = "80074000.serial", .con_id = "apb_pclk"}, - { .dev_id = "imx28-dma-apbx", }, - { .dev_id = "80024000.dma-apbx", }, -}; - -static struct clk_lookup ssp0_lookups[] = { - { .dev_id = "imx28-mmc.0", }, - { .dev_id = "80010000.ssp", }, -}; - -static struct clk_lookup ssp1_lookups[] = { - { .dev_id = "imx28-mmc.1", }, - { .dev_id = "80012000.ssp", }, -}; - -static struct clk_lookup ssp2_lookups[] = { - { .dev_id = "imx28-mmc.2", }, - { .dev_id = "80014000.ssp", }, -}; - -static struct clk_lookup ssp3_lookups[] = { - { .dev_id = "imx28-mmc.3", }, - { .dev_id = "80016000.ssp", }, -}; - -static struct clk_lookup lcdif_lookups[] = { - { .dev_id = "imx28-fb", }, - { .dev_id = "80030000.lcdif", }, -}; - -static struct clk_lookup gpmi_lookups[] = { - { .dev_id = "imx28-gpmi-nand", }, - { .dev_id = "8000c000.gpmi-nand", }, -}; - -static struct clk_lookup fec_lookups[] = { - { .dev_id = "imx28-fec.0", }, - { .dev_id = "imx28-fec.1", }, - { .dev_id = "800f0000.ethernet", }, - { .dev_id = "800f4000.ethernet", }, -}; - -static struct clk_lookup can0_lookups[] = { - { .dev_id = "flexcan.0", }, - { .dev_id = "80032000.can", }, -}; - -static struct clk_lookup can1_lookups[] = { - { .dev_id = "flexcan.1", }, - { .dev_id = "80034000.can", }, -}; - -static struct clk_lookup saif0_lookups[] = { - { .dev_id = "mxs-saif.0", }, - { .dev_id = "80042000.saif", }, -}; - -static struct clk_lookup saif1_lookups[] = { - { .dev_id = "mxs-saif.1", }, - { .dev_id = "80046000.saif", }, -}; - static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", }; static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", }; static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", }; @@ -228,6 +145,7 @@ enum imx28_clk { }; static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; static enum imx28_clk clks_init_on[] __initdata = { cpu, hbus, xbus, emi, uart, @@ -235,6 +153,7 @@ static enum imx28_clk clks_init_on[] __initdata = { int __init mx28_clocks_init(void) { + struct device_node *np; int i; clk_misc_init(); @@ -312,32 +231,20 @@ int __init mx28_clocks_init(void) return PTR_ERR(clks[i]); } + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); + if (np) { + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clks[clk32k], NULL, "timrot"); clk_register_clkdev(clks[enet_out], NULL, "enet_out"); - clk_register_clkdev(clks[pwm], NULL, "80064000.pwm"); - clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); - clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); - clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); - clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups)); - clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups)); - clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups)); - clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups)); - clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups)); - clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups)); - clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups)); - clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups)); - clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups)); - clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups)); - clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups)); - clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy"); - clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy"); - clk_register_clkdev(clks[usb0], NULL, "80080000.usb"); - clk_register_clkdev(clks[usb1], NULL, "80090000.usb"); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - mxs_timer_init(MX28_INT_TIMER0); + mxs_timer_init(); return 0; } diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c new file mode 100644 index 000000000000..af7bdbf9ebd7 --- /dev/null +++ b/drivers/clk/mxs/clk-ssp.c @@ -0,0 +1,62 @@ +/* + * Copyright 2012 DENX Software Engineering, GmbH + * + * Pulled from code: + * Portions copyright (C) 2003 Russell King, PXA MMCI Driver + * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver + * + * Copyright 2008 Embedded Alley Solutions, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/spi/mxs-spi.h> + +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate) +{ + unsigned int ssp_clk, ssp_sck; + u32 clock_divide, clock_rate; + u32 val; + + ssp_clk = clk_get_rate(ssp->clk); + + for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) { + clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide); + clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0; + if (clock_rate <= 255) + break; + } + + if (clock_divide > 254) { + dev_err(ssp->dev, + "%s: cannot set clock to %d\n", __func__, rate); + return; + } + + ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); + + val = readl(ssp->base + HW_SSP_TIMING(ssp)); + val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); + val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); + val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); + writel(val, ssp->base + HW_SSP_TIMING(ssp)); + + ssp->clk_rate = ssp_sck; + + dev_dbg(ssp->dev, + "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n", + __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate); +} +EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844c..e2c17d187d98 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); @@ -228,10 +228,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -239,6 +246,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -246,6 +254,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -255,11 +264,16 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -279,12 +293,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -316,10 +331,15 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -401,10 +421,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -412,17 +439,25 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -430,6 +465,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); @@ -450,10 +487,15 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); |