aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq/longhaul.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cpufreq/longhaul.c')
-rw-r--r--drivers/cpufreq/longhaul.c86
1 files changed, 36 insertions, 50 deletions
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 0f6b229afcb9..c46a12df40dd 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -21,6 +21,8 @@
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -40,8 +42,6 @@
#include "longhaul.h"
-#define PFX "longhaul: "
-
#define TYPE_LONGHAUL_V1 1
#define TYPE_LONGHAUL_V2 2
#define TYPE_POWERSAVER 3
@@ -347,14 +347,13 @@ retry_loop:
freqs.new = calc_speed(longhaul_get_cpu_mult());
/* Check if requested frequency is set. */
if (unlikely(freqs.new != speed)) {
- printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+ pr_info("Failed to set requested frequency!\n");
/* Revision ID = 1 but processor is expecting revision key
* equal to 0. Jumpers at the bottom of processor will change
* multiplier and FSB, but will not change bits in Longhaul
* MSR nor enable voltage scaling. */
if (!revid_errata) {
- printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
- "option.\n");
+ pr_info("Enabling \"Ignore Revision ID\" option\n");
revid_errata = 1;
msleep(200);
goto retry_loop;
@@ -364,11 +363,10 @@ retry_loop:
* but it doesn't change frequency. I tried poking various
* bits in northbridge registers, but without success. */
if (longhaul_flags & USE_ACPI_C3) {
- printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+ pr_info("Disabling ACPI C3 support\n");
longhaul_flags &= ~USE_ACPI_C3;
if (revid_errata) {
- printk(KERN_INFO PFX "Disabling \"Ignore "
- "Revision ID\" option.\n");
+ pr_info("Disabling \"Ignore Revision ID\" option\n");
revid_errata = 0;
}
msleep(200);
@@ -379,7 +377,7 @@ retry_loop:
* RevID = 1. RevID errata will make things right. Just
* to be 100% sure. */
if (longhaul_version == TYPE_LONGHAUL_V2) {
- printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+ pr_info("Switching to Longhaul ver. 1\n");
longhaul_version = TYPE_LONGHAUL_V1;
msleep(200);
goto retry_loop;
@@ -387,8 +385,7 @@ retry_loop:
}
if (!bm_timeout) {
- printk(KERN_INFO PFX "Warning: Timeout while waiting for "
- "idle PCI bus.\n");
+ pr_info("Warning: Timeout while waiting for idle PCI bus\n");
return -EBUSY;
}
@@ -433,12 +430,12 @@ static int longhaul_get_ranges(void)
/* Get current frequency */
mult = longhaul_get_cpu_mult();
if (mult == -1) {
- printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
+ pr_info("Invalid (reserved) multiplier!\n");
return -EINVAL;
}
fsb = guess_fsb(mult);
if (fsb == 0) {
- printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
+ pr_info("Invalid (reserved) FSB!\n");
return -EINVAL;
}
/* Get max multiplier - as we always did.
@@ -468,11 +465,11 @@ static int longhaul_get_ranges(void)
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
- printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+ pr_info("highestspeed == lowest, aborting\n");
return -EINVAL;
}
if (lowest_speed > highest_speed) {
- printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+ pr_info("nonsense! lowest (%d > %d) !\n",
lowest_speed, highest_speed);
return -EINVAL;
}
@@ -538,16 +535,16 @@ static void longhaul_setup_voltagescaling(void)
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
- printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
+ pr_info("Voltage scaling not supported by CPU\n");
return;
}
if (!longhaul.bits.VRMRev) {
- printk(KERN_INFO PFX "VRM 8.5\n");
+ pr_info("VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
- printk(KERN_INFO PFX "Mobile VRM\n");
+ pr_info("Mobile VRM\n");
if (cpu_model < CPU_NEHEMIAH)
return;
vrm_mV_table = &mobilevrm_mV[0];
@@ -558,27 +555,21 @@ static void longhaul_setup_voltagescaling(void)
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
- printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
- "Voltage scaling disabled.\n",
- minvid.mV/1000, minvid.mV%1000,
- maxvid.mV/1000, maxvid.mV%1000);
+ pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n",
+ minvid.mV/1000, minvid.mV%1000,
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (minvid.mV == maxvid.mV) {
- printk(KERN_INFO PFX "Claims to support voltage scaling but "
- "min & max are both %d.%03d. "
- "Voltage scaling disabled\n",
- maxvid.mV/1000, maxvid.mV%1000);
+ pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n",
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
/* How many voltage steps*/
numvscales = maxvid.pos - minvid.pos + 1;
- printk(KERN_INFO PFX
- "Max VID=%d.%03d "
- "Min VID=%d.%03d, "
- "%d possible voltage scales\n",
+ pr_info("Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
@@ -617,12 +608,12 @@ static void longhaul_setup_voltagescaling(void)
pos = minvid.pos;
freq_pos->driver_data |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
- printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+ pr_info("f: %d kHz, index: %d, vid: %d mV\n",
speed, (int)(freq_pos - longhaul_table), vid.mV);
}
can_scale_voltage = 1;
- printk(KERN_INFO PFX "Voltage scaling enabled.\n");
+ pr_info("Voltage scaling enabled\n");
}
@@ -720,8 +711,7 @@ static int enable_arbiter_disable(void)
pci_write_config_byte(dev, reg, pci_cmd);
pci_read_config_byte(dev, reg, &pci_cmd);
if (!(pci_cmd & 1<<7)) {
- printk(KERN_ERR PFX
- "Can't enable access to port 0x22.\n");
+ pr_err("Can't enable access to port 0x22\n");
status = 0;
}
}
@@ -758,8 +748,7 @@ static int longhaul_setup_southbridge(void)
if (pci_cmd & 1 << 7) {
pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
acpi_regs_addr &= 0xff00;
- printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
- acpi_regs_addr);
+ pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr);
}
pci_dev_put(dev);
@@ -853,14 +842,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
longhaul_version = TYPE_LONGHAUL_V1;
}
- printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
+ pr_info("VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
- printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
+ pr_cont("Longhaul v%d supported\n", longhaul_version);
break;
case TYPE_POWERSAVER:
- printk(KERN_CONT "Powersaver supported.\n");
+ pr_cont("Powersaver supported\n");
break;
};
@@ -889,15 +878,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
if (!(longhaul_flags & USE_ACPI_C3
|| longhaul_flags & USE_NORTHBRIDGE)
&& ((pr == NULL) || !(pr->flags.bm_control))) {
- printk(KERN_ERR PFX
- "No ACPI support. Unsupported northbridge.\n");
+ pr_err("No ACPI support: Unsupported northbridge\n");
return -ENODEV;
}
if (longhaul_flags & USE_NORTHBRIDGE)
- printk(KERN_INFO PFX "Using northbridge support.\n");
+ pr_info("Using northbridge support\n");
if (longhaul_flags & USE_ACPI_C3)
- printk(KERN_INFO PFX "Using ACPI support.\n");
+ pr_info("Using ACPI support\n");
ret = longhaul_get_ranges();
if (ret != 0)
@@ -934,20 +922,18 @@ static int __init longhaul_init(void)
return -ENODEV;
if (!enable) {
- printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n");
+ pr_err("Option \"enable\" not set - Aborting\n");
return -ENODEV;
}
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
- printk(KERN_ERR PFX "More than 1 CPU detected, "
- "longhaul disabled.\n");
+ pr_err("More than 1 CPU detected, longhaul disabled\n");
return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
- if (cpu_has_apic) {
- printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
- "broken in this configuration.\n");
+ if (boot_cpu_has(X86_FEATURE_APIC)) {
+ pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");
return -ENODEV;
}
#endif
@@ -955,7 +941,7 @@ static int __init longhaul_init(void)
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
case 10:
- printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
+ pr_err("Use acpi-cpufreq driver for VIA C7\n");
default:
;
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.