diff options
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 10 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 1 | ||||
-rw-r--r-- | drivers/cpufreq/arm_big_little.c | 22 | ||||
-rw-r--r-- | drivers/cpufreq/cppc_cpufreq.c | 3 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq_governor.c | 33 | ||||
-rw-r--r-- | drivers/cpufreq/intel_pstate.c | 10 | ||||
-rw-r--r-- | drivers/cpufreq/s5pv210-cpufreq.c | 4 | ||||
-rw-r--r-- | drivers/cpufreq/scpi-cpufreq.c | 124 |
8 files changed, 180 insertions, 27 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 642fd49793b0..1582c1c016b0 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -199,6 +199,16 @@ config ARM_SA1100_CPUFREQ config ARM_SA1110_CPUFREQ bool +config ARM_SCPI_CPUFREQ + tristate "SCPI based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL + help + This adds the CPUfreq driver support for ARM big.LITTLE platforms + using SCPI protocol for CPU power management. + + This driver uses SCPI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index d11309c487d0..c0af1a1281c8 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o +obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index f1e42f8ce0fc..c5d256caa664 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -149,6 +149,19 @@ bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) __func__, cpu, old_cluster, new_cluster, new_rate); ret = clk_set_rate(clk[new_cluster], new_rate * 1000); + if (!ret) { + /* + * FIXME: clk_set_rate hasn't returned an error here however it + * may be that clk_change_rate failed due to hardware or + * firmware issues and wasn't able to report that due to the + * current design of the clk core layer. To work around this + * problem we will read back the clock rate and check it is + * correct. This needs to be removed once clk core is fixed. + */ + if (clk_get_rate(clk[new_cluster]) != new_rate * 1000) + ret = -EIO; + } + if (WARN_ON(ret)) { pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret, new_cluster); @@ -189,15 +202,6 @@ bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) mutex_unlock(&cluster_lock[old_cluster]); } - /* - * FIXME: clk_set_rate has to handle the case where clk_change_rate - * can fail due to hardware or firmware issues. Until the clk core - * layer is fixed, we can check here. In most of the cases we will - * be reading only the cached value anyway. This needs to be removed - * once clk core is fixed. - */ - if (bL_cpufreq_get_rate(cpu) != new_rate) - return -EIO; return 0; } diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 93c219fab850..e8cb334094b0 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -166,8 +166,7 @@ static int __init cppc_cpufreq_init(void) out: for_each_possible_cpu(i) - if (all_cpu_data[i]) - kfree(all_cpu_data[i]); + kfree(all_cpu_data[i]); kfree(all_cpu_data); return -ENODEV; diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 11258c4c1b17..b260576ddb12 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -171,10 +171,6 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy, { int i; - mutex_lock(&cpufreq_governor_lock); - if (!policy->governor_enabled) - goto out_unlock; - if (!all_cpus) { /* * Use raw_smp_processor_id() to avoid preemptible warnings. @@ -188,9 +184,6 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy, for_each_cpu(i, policy->cpus) __gov_queue_work(i, dbs_data, delay); } - -out_unlock: - mutex_unlock(&cpufreq_governor_lock); } EXPORT_SYMBOL_GPL(gov_queue_work); @@ -229,13 +222,24 @@ static void dbs_timer(struct work_struct *work) struct cpu_dbs_info *cdbs = container_of(work, struct cpu_dbs_info, dwork.work); struct cpu_common_dbs_info *shared = cdbs->shared; - struct cpufreq_policy *policy = shared->policy; - struct dbs_data *dbs_data = policy->governor_data; + struct cpufreq_policy *policy; + struct dbs_data *dbs_data; unsigned int sampling_rate, delay; bool modify_all = true; mutex_lock(&shared->timer_mutex); + policy = shared->policy; + + /* + * Governor might already be disabled and there is no point continuing + * with the work-handler. + */ + if (!policy) + goto unlock; + + dbs_data = policy->governor_data; + if (dbs_data->cdata->governor == GOV_CONSERVATIVE) { struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; @@ -252,6 +256,7 @@ static void dbs_timer(struct work_struct *work) delay = dbs_data->cdata->gov_dbs_timer(cdbs, dbs_data, modify_all); gov_queue_work(dbs_data, policy, delay, modify_all); +unlock: mutex_unlock(&shared->timer_mutex); } @@ -478,9 +483,17 @@ static int cpufreq_governor_stop(struct cpufreq_policy *policy, if (!shared || !shared->policy) return -EBUSY; + /* + * Work-handler must see this updated, as it should not proceed any + * further after governor is disabled. And so timer_mutex is taken while + * updating this value. + */ + mutex_lock(&shared->timer_mutex); + shared->policy = NULL; + mutex_unlock(&shared->timer_mutex); + gov_cancel_work(dbs_data, policy); - shared->policy = NULL; mutex_destroy(&shared->timer_mutex); return 0; } diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 93a3c635ea27..2e31d097def6 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -684,8 +684,6 @@ static void __init intel_pstate_sysfs_expose_params(void) static void intel_pstate_hwp_enable(struct cpudata *cpudata) { - pr_info("intel_pstate: HWP enabled\n"); - wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1); } @@ -1557,8 +1555,10 @@ static int __init intel_pstate_init(void) if (!all_cpu_data) return -ENOMEM; - if (static_cpu_has_safe(X86_FEATURE_HWP) && !no_hwp) + if (static_cpu_has_safe(X86_FEATURE_HWP) && !no_hwp) { + pr_info("intel_pstate: HWP enabled\n"); hwp_active++; + } if (!hwp_active && hwp_only) goto out; @@ -1593,8 +1593,10 @@ static int __init intel_pstate_setup(char *str) if (!strcmp(str, "disable")) no_load = 1; - if (!strcmp(str, "no_hwp")) + if (!strcmp(str, "no_hwp")) { + pr_info("intel_pstate: HWP disabled\n"); no_hwp = 1; + } if (!strcmp(str, "force")) force_load = 1; if (!strcmp(str, "hwp_only")) diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 9e231f52150c..051a8a8224cd 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -212,11 +212,11 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) /* Find current DRAM frequency */ tmp = s5pv210_dram_conf[ch].freq; - do_div(tmp, freq); + tmp /= freq; tmp1 = s5pv210_dram_conf[ch].refresh; - do_div(tmp1, tmp); + tmp1 /= tmp; __raw_writel(tmp1, reg); } diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c new file mode 100644 index 000000000000..2c3b16fd3a01 --- /dev/null +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -0,0 +1,124 @@ +/* + * System Control and Power Interface (SCPI) based CPUFreq Interface driver + * + * It provides necessary ops to arm_big_little cpufreq driver. + * + * Copyright (C) 2015 ARM Ltd. + * Sudeep Holla <sudeep.holla@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/scpi_protocol.h> +#include <linux/types.h> + +#include "arm_big_little.h" + +static struct scpi_ops *scpi_ops; + +static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev) +{ + u8 domain = topology_physical_package_id(cpu_dev->id); + + if (domain < 0) + return ERR_PTR(-EINVAL); + return scpi_ops->dvfs_get_info(domain); +} + +static int scpi_opp_table_ops(struct device *cpu_dev, bool remove) +{ + int idx, ret = 0; + struct scpi_opp *opp; + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + + if (!info->opps) + return -EIO; + + for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) { + if (remove) + dev_pm_opp_remove(cpu_dev, opp->freq); + else + ret = dev_pm_opp_add(cpu_dev, opp->freq, + opp->m_volt * 1000); + if (ret) { + dev_warn(cpu_dev, "failed to add opp %uHz %umV\n", + opp->freq, opp->m_volt); + while (idx-- > 0) + dev_pm_opp_remove(cpu_dev, (--opp)->freq); + return ret; + } + } + return ret; +} + +static int scpi_get_transition_latency(struct device *cpu_dev) +{ + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + return info->latency; +} + +static int scpi_init_opp_table(struct device *cpu_dev) +{ + return scpi_opp_table_ops(cpu_dev, false); +} + +static void scpi_free_opp_table(struct device *cpu_dev) +{ + scpi_opp_table_ops(cpu_dev, true); +} + +static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = { + .name = "scpi", + .get_transition_latency = scpi_get_transition_latency, + .init_opp_table = scpi_init_opp_table, + .free_opp_table = scpi_free_opp_table, +}; + +static int scpi_cpufreq_probe(struct platform_device *pdev) +{ + scpi_ops = get_scpi_ops(); + if (!scpi_ops) + return -EIO; + + return bL_cpufreq_register(&scpi_cpufreq_ops); +} + +static int scpi_cpufreq_remove(struct platform_device *pdev) +{ + bL_cpufreq_unregister(&scpi_cpufreq_ops); + scpi_ops = NULL; + return 0; +} + +static struct platform_driver scpi_cpufreq_platdrv = { + .driver = { + .name = "scpi-cpufreq", + .owner = THIS_MODULE, + }, + .probe = scpi_cpufreq_probe, + .remove = scpi_cpufreq_remove, +}; +module_platform_driver(scpi_cpufreq_platdrv); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver"); +MODULE_LICENSE("GPL v2"); |