diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/core')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc.c | 112 | ||||
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc_link.c | 36 | ||||
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 19 | ||||
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 814 | ||||
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 4 |
5 files changed, 435 insertions, 550 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 3279e26c3440..d9c57984394b 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -62,6 +62,55 @@ const static char DC_BUILD_ID[] = "production-build"; +/** + * DOC: Overview + * + * DC is the OS-agnostic component of the amdgpu DC driver. + * + * DC maintains and validates a set of structs representing the state of the + * driver and writes that state to AMD hardware + * + * Main DC HW structs: + * + * struct dc - The central struct. One per driver. Created on driver load, + * destroyed on driver unload. + * + * struct dc_context - One per driver. + * Used as a backpointer by most other structs in dc. + * + * struct dc_link - One per connector (the physical DP, HDMI, miniDP, or eDP + * plugpoints). Created on driver load, destroyed on driver unload. + * + * struct dc_sink - One per display. Created on boot or hotplug. + * Destroyed on shutdown or hotunplug. A dc_link can have a local sink + * (the display directly attached). It may also have one or more remote + * sinks (in the Multi-Stream Transport case) + * + * struct resource_pool - One per driver. Represents the hw blocks not in the + * main pipeline. Not directly accessible by dm. + * + * Main dc state structs: + * + * These structs can be created and destroyed as needed. There is a full set of + * these structs in dc->current_state representing the currently programmed state. + * + * struct dc_state - The global DC state to track global state information, + * such as bandwidth values. + * + * struct dc_stream_state - Represents the hw configuration for the pipeline from + * a framebuffer to a display. Maps one-to-one with dc_sink. + * + * struct dc_plane_state - Represents a framebuffer. Each stream has at least one, + * and may have more in the Multi-Plane Overlay case. + * + * struct resource_context - Represents the programmable state of everything in + * the resource_pool. Not directly accessible by dm. + * + * struct pipe_ctx - A member of struct resource_context. Represents the + * internal hardware pipeline components. Each dc_plane_state has either + * one or two (in the pipe-split case). + */ + /******************************************************************************* * Private functions ******************************************************************************/ @@ -175,6 +224,17 @@ failed_alloc: return false; } +static struct dc_perf_trace *dc_perf_trace_create(void) +{ + return kzalloc(sizeof(struct dc_perf_trace), GFP_KERNEL); +} + +static void dc_perf_trace_destroy(struct dc_perf_trace **perf_trace) +{ + kfree(*perf_trace); + *perf_trace = NULL; +} + /** ***************************************************************************** * Function: dc_stream_adjust_vmin_vmax @@ -240,7 +300,7 @@ bool dc_stream_get_crtc_position(struct dc *dc, } /** - * dc_stream_configure_crc: Configure CRC capture for the given stream. + * dc_stream_configure_crc() - Configure CRC capture for the given stream. * @dc: DC Object * @stream: The stream to configure CRC on. * @enable: Enable CRC if true, disable otherwise. @@ -292,7 +352,7 @@ bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream, } /** - * dc_stream_get_crc: Get CRC values for the given stream. + * dc_stream_get_crc() - Get CRC values for the given stream. * @dc: DC object * @stream: The DC stream state of the stream to get CRCs from. * @r_cr, g_y, b_cb: CRC values for the three channels are stored here. @@ -328,7 +388,7 @@ void dc_stream_set_dither_option(struct dc_stream_state *stream, enum dc_dither_option option) { struct bit_depth_reduction_params params; - struct dc_link *link = stream->status.link; + struct dc_link *link = stream->sink->link; struct pipe_ctx *pipes = NULL; int i; @@ -536,6 +596,8 @@ static void destruct(struct dc *dc) if (dc->ctx->created_bios) dal_bios_parser_destroy(&dc->ctx->dc_bios); + dc_perf_trace_destroy(&dc->ctx->perf_trace); + kfree(dc->ctx); dc->ctx = NULL; @@ -659,6 +721,12 @@ static bool construct(struct dc *dc, goto fail; } + dc_ctx->perf_trace = dc_perf_trace_create(); + if (!dc_ctx->perf_trace) { + ASSERT_CRITICAL(false); + goto fail; + } + /* Create GPIO service */ dc_ctx->gpio_service = dal_gpio_service_create( dc_version, @@ -1329,6 +1397,11 @@ static enum surface_update_type check_update_surfaces_for_stream( return overall_type; } +/** + * dc_check_update_surfaces_for_stream() - Determine update type (fast, med, or full) + * + * See :c:type:`enum surface_update_type <surface_update_type>` for explanation of update types + */ enum surface_update_type dc_check_update_surfaces_for_stream( struct dc *dc, struct dc_surface_update *updates, @@ -1409,6 +1482,14 @@ static void commit_planes_do_stream_update(struct dc *dc, if (stream_update->output_csc_transform) dc_stream_program_csc_matrix(dc, stream); + if (stream_update->dither_option) { + resource_build_bit_depth_reduction_params(pipe_ctx->stream, + &pipe_ctx->stream->bit_depth_params); + pipe_ctx->stream_res.opp->funcs->opp_program_fmt(pipe_ctx->stream_res.opp, + &stream->bit_depth_params, + &stream->clamping); + } + /* Full fe update*/ if (update_type == UPDATE_TYPE_FAST) continue; @@ -1631,6 +1712,9 @@ enum dc_irq_source dc_interrupt_to_irq_source( return dal_irq_service_to_irq_source(dc->res_pool->irqs, src_id, ext_id); } +/** + * dc_interrupt_set() - Enable/disable an AMD hw interrupt source + */ bool dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable) { @@ -1686,6 +1770,15 @@ void dc_resume(struct dc *dc) core_link_resume(dc->links[i]); } +bool dc_is_dmcu_initialized(struct dc *dc) +{ + struct dmcu *dmcu = dc->res_pool->dmcu; + + if (dmcu) + return dmcu->funcs->is_dmcu_initialized(dmcu); + return false; +} + bool dc_submit_i2c( struct dc *dc, uint32_t link_index, @@ -1715,6 +1808,11 @@ static bool link_add_remote_sink_helper(struct dc_link *dc_link, struct dc_sink return true; } +/** + * dc_link_add_remote_sink() - Create a sink and attach it to an existing link + * + * EDID length is in bytes + */ struct dc_sink *dc_link_add_remote_sink( struct dc_link *link, const uint8_t *edid, @@ -1773,6 +1871,12 @@ fail_add_sink: return NULL; } +/** + * dc_link_remove_remote_sink() - Remove a remote sink from a dc_link + * + * Note that this just removes the struct dc_sink - it doesn't + * program hardware or alter other members of dc_link + */ void dc_link_remove_remote_sink(struct dc_link *link, struct dc_sink *sink) { int i; @@ -1810,4 +1914,4 @@ void get_clock_requirements_for_state(struct dc_state *state, struct AsicStateEx info->dcfClockDeepSleep = (unsigned int)state->bw.dcn.clk.dcfclk_deep_sleep_khz; info->fClock = (unsigned int)state->bw.dcn.clk.fclk_khz; info->phyClock = (unsigned int)state->bw.dcn.clk.phyclk_khz; -}
\ No newline at end of file +} diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 7ee9c033acbd..4dc5846de5c4 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -198,6 +198,13 @@ static bool program_hpd_filter( return result; } +/** + * dc_link_detect_sink() - Determine if there is a sink connected + * + * @type: Returned connection type + * Does not detect downstream devices, such as MST sinks + * or display connected through active dongles + */ bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type) { uint32_t is_hpd_high = 0; @@ -324,9 +331,9 @@ static enum signal_type get_basic_signal_type( return SIGNAL_TYPE_NONE; } -/* - * @brief - * Check whether there is a dongle on DP connector +/** + * dc_link_is_dp_sink_present() - Check if there is a native DP + * or passive DP-HDMI dongle connected */ bool dc_link_is_dp_sink_present(struct dc_link *link) { @@ -593,6 +600,14 @@ static bool is_same_edid(struct dc_edid *old_edid, struct dc_edid *new_edid) return (memcmp(old_edid->raw_edid, new_edid->raw_edid, new_edid->length) == 0); } +/** + * dc_link_detect() - Detect if a sink is attached to a given link + * + * link->local_sink is created or destroyed as needed. + * + * This does not create remote sinks but will trigger DM + * to start MST detection if a branch is detected. + */ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason) { struct dc_sink_init_data sink_init_data = { 0 }; @@ -1396,8 +1411,6 @@ static enum dc_status enable_link_dp( else status = DC_FAIL_DP_LINK_TRAINING; - enable_stream_features(pipe_ctx); - return status; } @@ -2175,11 +2188,11 @@ bool dc_link_set_backlight_level(const struct dc_link *link, backlight_pwm_u16_16, backlight_pwm_u16_16); if (dc_is_embedded_signal(link->connector_signal)) { - if (stream != NULL) { - for (i = 0; i < MAX_PIPES; i++) { + for (i = 0; i < MAX_PIPES; i++) { + if (core_dc->current_state->res_ctx.pipe_ctx[i].stream) { if (core_dc->current_state->res_ctx. - pipe_ctx[i].stream - == stream) + pipe_ctx[i].stream->sink->link + == link) /* DMCU -1 for all controller id values, * therefore +1 here */ @@ -2218,7 +2231,7 @@ bool dc_link_set_psr_enable(const struct dc_link *link, bool enable, bool wait) struct dc *core_dc = link->ctx->dc; struct dmcu *dmcu = core_dc->res_pool->dmcu; - if (dmcu != NULL && link->psr_enabled) + if ((dmcu != NULL && dmcu->funcs->is_dmcu_initialized(dmcu)) && link->psr_enabled) dmcu->funcs->set_psr_enable(dmcu, enable, wait); return true; @@ -2594,6 +2607,9 @@ void core_link_enable_stream( core_dc->hwss.unblank_stream(pipe_ctx, &pipe_ctx->stream->sink->link->cur_link_settings); + if (dc_is_dp_signal(pipe_ctx->stream->signal)) + enable_stream_features(pipe_ctx); + dc_link_set_backlight_level(pipe_ctx->stream->sink->link, pipe_ctx->stream->bl_pwm_level, 0, diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index d91df5ef0cb3..849a3a3032f7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -2196,7 +2196,7 @@ static void get_active_converter_info( } if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_11) { - uint8_t det_caps[4]; + uint8_t det_caps[16]; /* CTS 4.2.2.7 expects source to read Detailed Capabilities Info : 00080h-0008F.*/ union dwnstream_port_caps_byte0 *port_caps = (union dwnstream_port_caps_byte0 *)det_caps; core_link_read_dpcd(link, DP_DOWNSTREAM_PORT_0, @@ -2371,11 +2371,22 @@ static bool retrieve_link_cap(struct dc_link *link) dpcd_data[DP_TRAINING_AUX_RD_INTERVAL]; if (aux_rd_interval.bits.EXT_RECIEVER_CAP_FIELD_PRESENT == 1) { - core_link_read_dpcd( + uint8_t ext_cap_data[16]; + + memset(ext_cap_data, '\0', sizeof(ext_cap_data)); + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( link, DP_DP13_DPCD_REV, - dpcd_data, - sizeof(dpcd_data)); + ext_cap_data, + sizeof(ext_cap_data)); + if (status == DC_OK) { + memcpy(dpcd_data, ext_cap_data, sizeof(dpcd_data)); + break; + } + } + if (status != DC_OK) + dm_error("%s: Read extend caps data failed, use cap from dpcd 0.\n", __func__); } } diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index fc65b0055167..c347afd1030f 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -478,10 +478,29 @@ static enum pixel_format convert_pixel_format_to_dalsurface( return dal_pixel_format; } -static void rect_swap_helper(struct rect *rect) -{ - swap(rect->height, rect->width); - swap(rect->x, rect->y); +static inline void get_vp_scan_direction( + enum dc_rotation_angle rotation, + bool horizontal_mirror, + bool *orthogonal_rotation, + bool *flip_vert_scan_dir, + bool *flip_horz_scan_dir) +{ + *orthogonal_rotation = false; + *flip_vert_scan_dir = false; + *flip_horz_scan_dir = false; + if (rotation == ROTATION_ANGLE_180) { + *flip_vert_scan_dir = true; + *flip_horz_scan_dir = true; + } else if (rotation == ROTATION_ANGLE_90) { + *orthogonal_rotation = true; + *flip_horz_scan_dir = true; + } else if (rotation == ROTATION_ANGLE_270) { + *orthogonal_rotation = true; + *flip_vert_scan_dir = true; + } + + if (horizontal_mirror) + *flip_horz_scan_dir = !*flip_horz_scan_dir; } static void calculate_viewport(struct pipe_ctx *pipe_ctx) @@ -490,33 +509,14 @@ static void calculate_viewport(struct pipe_ctx *pipe_ctx) const struct dc_stream_state *stream = pipe_ctx->stream; struct scaler_data *data = &pipe_ctx->plane_res.scl_data; struct rect surf_src = plane_state->src_rect; - struct rect clip = { 0 }; + struct rect clip, dest; int vpc_div = (data->format == PIXEL_FORMAT_420BPP8 || data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1; bool pri_split = pipe_ctx->bottom_pipe && pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state; bool sec_split = pipe_ctx->top_pipe && pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state; - bool flip_vert_scan_dir = false, flip_horz_scan_dir = false; - - - /* - * We need take horizontal mirror into account. On an unrotated surface this means - * that the viewport offset is actually the offset from the other side of source - * image so we have to subtract the right edge of the viewport from the right edge of - * the source window. Similar to mirror we need to take into account how offset is - * affected for 270/180 rotations - */ - if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_180) { - flip_vert_scan_dir = true; - flip_horz_scan_dir = true; - } else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90) - flip_vert_scan_dir = true; - else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) - flip_horz_scan_dir = true; - - if (pipe_ctx->plane_state->horizontal_mirror) - flip_horz_scan_dir = !flip_horz_scan_dir; + bool orthogonal_rotation, flip_y_start, flip_x_start; if (stream->view_format == VIEW_3D_FORMAT_SIDE_BY_SIDE || stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM) { @@ -524,13 +524,10 @@ static void calculate_viewport(struct pipe_ctx *pipe_ctx) sec_split = false; } - if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 || - pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) - rect_swap_helper(&surf_src); - /* The actual clip is an intersection between stream * source and surface clip */ + dest = plane_state->dst_rect; clip.x = stream->src.x > plane_state->clip_rect.x ? stream->src.x : plane_state->clip_rect.x; @@ -547,66 +544,77 @@ static void calculate_viewport(struct pipe_ctx *pipe_ctx) stream->src.y + stream->src.height - clip.y : plane_state->clip_rect.y + plane_state->clip_rect.height - clip.y ; - /* offset = surf_src.ofs + (clip.ofs - surface->dst_rect.ofs) * scl_ratio - * note: surf_src.ofs should be added after rotation/mirror offset direction - * adjustment since it is already in viewport space - * num_pixels = clip.num_pix * scl_ratio + /* + * Need to calculate how scan origin is shifted in vp space + * to correctly rotate clip and dst */ - data->viewport.x = (clip.x - plane_state->dst_rect.x) * - surf_src.width / plane_state->dst_rect.width; - data->viewport.width = clip.width * - surf_src.width / plane_state->dst_rect.width; + get_vp_scan_direction( + plane_state->rotation, + plane_state->horizontal_mirror, + &orthogonal_rotation, + &flip_y_start, + &flip_x_start); - data->viewport.y = (clip.y - plane_state->dst_rect.y) * - surf_src.height / plane_state->dst_rect.height; - data->viewport.height = clip.height * - surf_src.height / plane_state->dst_rect.height; - - if (flip_vert_scan_dir) - data->viewport.y = surf_src.height - data->viewport.y - data->viewport.height; - if (flip_horz_scan_dir) - data->viewport.x = surf_src.width - data->viewport.x - data->viewport.width; + if (orthogonal_rotation) { + swap(clip.x, clip.y); + swap(clip.width, clip.height); + swap(dest.x, dest.y); + swap(dest.width, dest.height); + } + if (flip_x_start) { + clip.x = dest.x + dest.width - clip.x - clip.width; + dest.x = 0; + } + if (flip_y_start) { + clip.y = dest.y + dest.height - clip.y - clip.height; + dest.y = 0; + } - data->viewport.x += surf_src.x; - data->viewport.y += surf_src.y; + /* offset = surf_src.ofs + (clip.ofs - surface->dst_rect.ofs) * scl_ratio + * num_pixels = clip.num_pix * scl_ratio + */ + data->viewport.x = surf_src.x + (clip.x - dest.x) * surf_src.width / dest.width; + data->viewport.width = clip.width * surf_src.width / dest.width; + + data->viewport.y = surf_src.y + (clip.y - dest.y) * surf_src.height / dest.height; + data->viewport.height = clip.height * surf_src.height / dest.height; + + /* Handle split */ + if (pri_split || sec_split) { + if (orthogonal_rotation) { + if (flip_y_start != pri_split) + data->viewport.height /= 2; + else { + data->viewport.y += data->viewport.height / 2; + /* Ceil offset pipe */ + data->viewport.height = (data->viewport.height + 1) / 2; + } + } else { + if (flip_x_start != pri_split) + data->viewport.width /= 2; + else { + data->viewport.x += data->viewport.width / 2; + /* Ceil offset pipe */ + data->viewport.width = (data->viewport.width + 1) / 2; + } + } + } /* Round down, compensate in init */ data->viewport_c.x = data->viewport.x / vpc_div; data->viewport_c.y = data->viewport.y / vpc_div; - data->inits.h_c = (data->viewport.x % vpc_div) != 0 ? - dc_fixpt_half : dc_fixpt_zero; - data->inits.v_c = (data->viewport.y % vpc_div) != 0 ? - dc_fixpt_half : dc_fixpt_zero; + data->inits.h_c = (data->viewport.x % vpc_div) != 0 ? dc_fixpt_half : dc_fixpt_zero; + data->inits.v_c = (data->viewport.y % vpc_div) != 0 ? dc_fixpt_half : dc_fixpt_zero; + /* Round up, assume original video size always even dimensions */ data->viewport_c.width = (data->viewport.width + vpc_div - 1) / vpc_div; data->viewport_c.height = (data->viewport.height + vpc_div - 1) / vpc_div; - - /* Handle hsplit */ - if (sec_split) { - data->viewport.x += data->viewport.width / 2; - data->viewport_c.x += data->viewport_c.width / 2; - /* Ceil offset pipe */ - data->viewport.width = (data->viewport.width + 1) / 2; - data->viewport_c.width = (data->viewport_c.width + 1) / 2; - } else if (pri_split) { - if (data->viewport.width > 1) - data->viewport.width /= 2; - if (data->viewport_c.width > 1) - data->viewport_c.width /= 2; - } - - if (plane_state->rotation == ROTATION_ANGLE_90 || - plane_state->rotation == ROTATION_ANGLE_270) { - rect_swap_helper(&data->viewport_c); - rect_swap_helper(&data->viewport); - } } -static void calculate_recout(struct pipe_ctx *pipe_ctx, struct rect *recout_full) +static void calculate_recout(struct pipe_ctx *pipe_ctx) { const struct dc_plane_state *plane_state = pipe_ctx->plane_state; const struct dc_stream_state *stream = pipe_ctx->stream; - struct rect surf_src = plane_state->src_rect; struct rect surf_clip = plane_state->clip_rect; bool pri_split = pipe_ctx->bottom_pipe && pipe_ctx->bottom_pipe->plane_state == pipe_ctx->plane_state; @@ -614,10 +622,6 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx, struct rect *recout_full pipe_ctx->top_pipe->plane_state == pipe_ctx->plane_state; bool top_bottom_split = stream->view_format == VIEW_3D_FORMAT_TOP_AND_BOTTOM; - if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 || - pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) - rect_swap_helper(&surf_src); - pipe_ctx->plane_res.scl_data.recout.x = stream->dst.x; if (stream->src.x < surf_clip.x) pipe_ctx->plane_res.scl_data.recout.x += (surf_clip.x @@ -646,7 +650,7 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx, struct rect *recout_full stream->dst.y + stream->dst.height - pipe_ctx->plane_res.scl_data.recout.y; - /* Handle h & vsplit */ + /* Handle h & v split, handle rotation using viewport */ if (sec_split && top_bottom_split) { pipe_ctx->plane_res.scl_data.recout.y += pipe_ctx->plane_res.scl_data.recout.height / 2; @@ -655,44 +659,14 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx, struct rect *recout_full (pipe_ctx->plane_res.scl_data.recout.height + 1) / 2; } else if (pri_split && top_bottom_split) pipe_ctx->plane_res.scl_data.recout.height /= 2; - else if (pri_split || sec_split) { - /* HMirror XOR Secondary_pipe XOR Rotation_180 */ - bool right_view = (sec_split != plane_state->horizontal_mirror) != - (plane_state->rotation == ROTATION_ANGLE_180); - - if (plane_state->rotation == ROTATION_ANGLE_90 - || plane_state->rotation == ROTATION_ANGLE_270) - /* Secondary_pipe XOR Rotation_270 */ - right_view = (plane_state->rotation == ROTATION_ANGLE_270) != sec_split; - - if (right_view) { - pipe_ctx->plane_res.scl_data.recout.x += - pipe_ctx->plane_res.scl_data.recout.width / 2; - /* Ceil offset pipe */ - pipe_ctx->plane_res.scl_data.recout.width = - (pipe_ctx->plane_res.scl_data.recout.width + 1) / 2; - } else { - if (pipe_ctx->plane_res.scl_data.recout.width > 1) - pipe_ctx->plane_res.scl_data.recout.width /= 2; - } - } - /* Unclipped recout offset = stream dst offset + ((surf dst offset - stream surf_src offset) - * * 1/ stream scaling ratio) - (surf surf_src offset * 1/ full scl - * ratio) - */ - recout_full->x = stream->dst.x + (plane_state->dst_rect.x - stream->src.x) - * stream->dst.width / stream->src.width - - surf_src.x * plane_state->dst_rect.width / surf_src.width - * stream->dst.width / stream->src.width; - recout_full->y = stream->dst.y + (plane_state->dst_rect.y - stream->src.y) - * stream->dst.height / stream->src.height - - surf_src.y * plane_state->dst_rect.height / surf_src.height - * stream->dst.height / stream->src.height; - - recout_full->width = plane_state->dst_rect.width - * stream->dst.width / stream->src.width; - recout_full->height = plane_state->dst_rect.height - * stream->dst.height / stream->src.height; + else if (sec_split) { + pipe_ctx->plane_res.scl_data.recout.x += + pipe_ctx->plane_res.scl_data.recout.width / 2; + /* Ceil offset pipe */ + pipe_ctx->plane_res.scl_data.recout.width = + (pipe_ctx->plane_res.scl_data.recout.width + 1) / 2; + } else if (pri_split) + pipe_ctx->plane_res.scl_data.recout.width /= 2; } static void calculate_scaling_ratios(struct pipe_ctx *pipe_ctx) @@ -705,9 +679,10 @@ static void calculate_scaling_ratios(struct pipe_ctx *pipe_ctx) const int out_w = stream->dst.width; const int out_h = stream->dst.height; + /*Swap surf_src height and width since scaling ratios are in recout rotation*/ if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 || pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) - rect_swap_helper(&surf_src); + swap(surf_src.height, surf_src.width); pipe_ctx->plane_res.scl_data.ratios.horz = dc_fixpt_from_fraction( surf_src.width, @@ -744,351 +719,202 @@ static void calculate_scaling_ratios(struct pipe_ctx *pipe_ctx) pipe_ctx->plane_res.scl_data.ratios.vert_c, 19); } -static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx, struct rect *recout_full) +static inline void adjust_vp_and_init_for_seamless_clip( + bool flip_scan_dir, + int recout_skip, + int src_size, + int taps, + struct fixed31_32 ratio, + struct fixed31_32 *init, + int *vp_offset, + int *vp_size) { - struct scaler_data *data = &pipe_ctx->plane_res.scl_data; - struct rect src = pipe_ctx->plane_state->src_rect; - int vpc_div = (data->format == PIXEL_FORMAT_420BPP8 - || data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1; - bool flip_vert_scan_dir = false, flip_horz_scan_dir = false; - - /* - * Need to calculate the scan direction for viewport to make adjustments - */ - if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_180) { - flip_vert_scan_dir = true; - flip_horz_scan_dir = true; - } else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90) - flip_vert_scan_dir = true; - else if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) - flip_horz_scan_dir = true; - - if (pipe_ctx->plane_state->horizontal_mirror) - flip_horz_scan_dir = !flip_horz_scan_dir; - - if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 || - pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) { - rect_swap_helper(&src); - rect_swap_helper(&data->viewport_c); - rect_swap_helper(&data->viewport); - } - - /* - * Init calculated according to formula: - * init = (scaling_ratio + number_of_taps + 1) / 2 - * init_bot = init + scaling_ratio - * init_c = init + truncated_vp_c_offset(from calculate viewport) - */ - data->inits.h = dc_fixpt_truncate(dc_fixpt_div_int( - dc_fixpt_add_int(data->ratios.horz, data->taps.h_taps + 1), 2), 19); - - data->inits.h_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.h_c, dc_fixpt_div_int( - dc_fixpt_add_int(data->ratios.horz_c, data->taps.h_taps_c + 1), 2)), 19); - - data->inits.v = dc_fixpt_truncate(dc_fixpt_div_int( - dc_fixpt_add_int(data->ratios.vert, data->taps.v_taps + 1), 2), 19); - - data->inits.v_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.v_c, dc_fixpt_div_int( - dc_fixpt_add_int(data->ratios.vert_c, data->taps.v_taps_c + 1), 2)), 19); - - if (!flip_horz_scan_dir) { + if (!flip_scan_dir) { /* Adjust for viewport end clip-off */ - if ((data->viewport.x + data->viewport.width) < (src.x + src.width)) { - int vp_clip = src.x + src.width - data->viewport.width - data->viewport.x; - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.h, data->ratios.horz)); + if ((*vp_offset + *vp_size) < src_size) { + int vp_clip = src_size - *vp_size - *vp_offset; + int int_part = dc_fixpt_floor(dc_fixpt_sub(*init, ratio)); int_part = int_part > 0 ? int_part : 0; - data->viewport.width += int_part < vp_clip ? int_part : vp_clip; - } - if ((data->viewport_c.x + data->viewport_c.width) < (src.x + src.width) / vpc_div) { - int vp_clip = (src.x + src.width) / vpc_div - - data->viewport_c.width - data->viewport_c.x; - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.h_c, data->ratios.horz_c)); - - int_part = int_part > 0 ? int_part : 0; - data->viewport_c.width += int_part < vp_clip ? int_part : vp_clip; + *vp_size += int_part < vp_clip ? int_part : vp_clip; } /* Adjust for non-0 viewport offset */ - if (data->viewport.x) { - int int_part; - - data->inits.h = dc_fixpt_add(data->inits.h, dc_fixpt_mul_int( - data->ratios.horz, data->recout.x - recout_full->x)); - int_part = dc_fixpt_floor(data->inits.h) - data->viewport.x; - if (int_part < data->taps.h_taps) { - int int_adj = data->viewport.x >= (data->taps.h_taps - int_part) ? - (data->taps.h_taps - int_part) : data->viewport.x; - data->viewport.x -= int_adj; - data->viewport.width += int_adj; - int_part += int_adj; - } else if (int_part > data->taps.h_taps) { - data->viewport.x += int_part - data->taps.h_taps; - data->viewport.width -= int_part - data->taps.h_taps; - int_part = data->taps.h_taps; - } - data->inits.h.value &= 0xffffffff; - data->inits.h = dc_fixpt_add_int(data->inits.h, int_part); - } - - if (data->viewport_c.x) { + if (*vp_offset) { int int_part; - data->inits.h_c = dc_fixpt_add(data->inits.h_c, dc_fixpt_mul_int( - data->ratios.horz_c, data->recout.x - recout_full->x)); - int_part = dc_fixpt_floor(data->inits.h_c) - data->viewport_c.x; - if (int_part < data->taps.h_taps_c) { - int int_adj = data->viewport_c.x >= (data->taps.h_taps_c - int_part) ? - (data->taps.h_taps_c - int_part) : data->viewport_c.x; - data->viewport_c.x -= int_adj; - data->viewport_c.width += int_adj; + *init = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_skip)); + int_part = dc_fixpt_floor(*init) - *vp_offset; + if (int_part < taps) { + int int_adj = *vp_offset >= (taps - int_part) ? + (taps - int_part) : *vp_offset; + *vp_offset -= int_adj; + *vp_size += int_adj; int_part += int_adj; - } else if (int_part > data->taps.h_taps_c) { - data->viewport_c.x += int_part - data->taps.h_taps_c; - data->viewport_c.width -= int_part - data->taps.h_taps_c; - int_part = data->taps.h_taps_c; + } else if (int_part > taps) { + *vp_offset += int_part - taps; + *vp_size -= int_part - taps; + int_part = taps; } - data->inits.h_c.value &= 0xffffffff; - data->inits.h_c = dc_fixpt_add_int(data->inits.h_c, int_part); + init->value &= 0xffffffff; + *init = dc_fixpt_add_int(*init, int_part); } } else { /* Adjust for non-0 viewport offset */ - if (data->viewport.x) { - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.h, data->ratios.horz)); - - int_part = int_part > 0 ? int_part : 0; - data->viewport.width += int_part < data->viewport.x ? int_part : data->viewport.x; - data->viewport.x -= int_part < data->viewport.x ? int_part : data->viewport.x; - } - if (data->viewport_c.x) { - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.h_c, data->ratios.horz_c)); + if (*vp_offset) { + int int_part = dc_fixpt_floor(dc_fixpt_sub(*init, ratio)); int_part = int_part > 0 ? int_part : 0; - data->viewport_c.width += int_part < data->viewport_c.x ? int_part : data->viewport_c.x; - data->viewport_c.x -= int_part < data->viewport_c.x ? int_part : data->viewport_c.x; + *vp_size += int_part < *vp_offset ? int_part : *vp_offset; + *vp_offset -= int_part < *vp_offset ? int_part : *vp_offset; } /* Adjust for viewport end clip-off */ - if ((data->viewport.x + data->viewport.width) < (src.x + src.width)) { + if ((*vp_offset + *vp_size) < src_size) { int int_part; - int end_offset = src.x + src.width - - data->viewport.x - data->viewport.width; + int end_offset = src_size - *vp_offset - *vp_size; /* * this is init if vp had no offset, keep in mind this is from the * right side of vp due to scan direction */ - data->inits.h = dc_fixpt_add(data->inits.h, dc_fixpt_mul_int( - data->ratios.horz, data->recout.x - recout_full->x)); + *init = dc_fixpt_add(*init, dc_fixpt_mul_int(ratio, recout_skip)); /* * this is the difference between first pixel of viewport available to read * and init position, takning into account scan direction */ - int_part = dc_fixpt_floor(data->inits.h) - end_offset; - if (int_part < data->taps.h_taps) { - int int_adj = end_offset >= (data->taps.h_taps - int_part) ? - (data->taps.h_taps - int_part) : end_offset; - data->viewport.width += int_adj; + int_part = dc_fixpt_floor(*init) - end_offset; + if (int_part < taps) { + int int_adj = end_offset >= (taps - int_part) ? + (taps - int_part) : end_offset; + *vp_size += int_adj; int_part += int_adj; - } else if (int_part > data->taps.h_taps) { - data->viewport.width += int_part - data->taps.h_taps; - int_part = data->taps.h_taps; + } else if (int_part > taps) { + *vp_size += int_part - taps; + int_part = taps; } - data->inits.h.value &= 0xffffffff; - data->inits.h = dc_fixpt_add_int(data->inits.h, int_part); + init->value &= 0xffffffff; + *init = dc_fixpt_add_int(*init, int_part); } - - if ((data->viewport_c.x + data->viewport_c.width) < (src.x + src.width) / vpc_div) { - int int_part; - int end_offset = (src.x + src.width) / vpc_div - - data->viewport_c.x - data->viewport_c.width; - - /* - * this is init if vp had no offset, keep in mind this is from the - * right side of vp due to scan direction - */ - data->inits.h_c = dc_fixpt_add(data->inits.h_c, dc_fixpt_mul_int( - data->ratios.horz_c, data->recout.x - recout_full->x)); - /* - * this is the difference between first pixel of viewport available to read - * and init position, takning into account scan direction - */ - int_part = dc_fixpt_floor(data->inits.h_c) - end_offset; - if (int_part < data->taps.h_taps_c) { - int int_adj = end_offset >= (data->taps.h_taps_c - int_part) ? - (data->taps.h_taps_c - int_part) : end_offset; - data->viewport_c.width += int_adj; - int_part += int_adj; - } else if (int_part > data->taps.h_taps_c) { - data->viewport_c.width += int_part - data->taps.h_taps_c; - int_part = data->taps.h_taps_c; - } - data->inits.h_c.value &= 0xffffffff; - data->inits.h_c = dc_fixpt_add_int(data->inits.h_c, int_part); - } - } - if (!flip_vert_scan_dir) { - /* Adjust for viewport end clip-off */ - if ((data->viewport.y + data->viewport.height) < (src.y + src.height)) { - int vp_clip = src.y + src.height - data->viewport.height - data->viewport.y; - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.v, data->ratios.vert)); - - int_part = int_part > 0 ? int_part : 0; - data->viewport.height += int_part < vp_clip ? int_part : vp_clip; - } - if ((data->viewport_c.y + data->viewport_c.height) < (src.y + src.height) / vpc_div) { - int vp_clip = (src.y + src.height) / vpc_div - - data->viewport_c.height - data->viewport_c.y; - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.v_c, data->ratios.vert_c)); - - int_part = int_part > 0 ? int_part : 0; - data->viewport_c.height += int_part < vp_clip ? int_part : vp_clip; - } - - /* Adjust for non-0 viewport offset */ - if (data->viewport.y) { - int int_part; - - data->inits.v = dc_fixpt_add(data->inits.v, dc_fixpt_mul_int( - data->ratios.vert, data->recout.y - recout_full->y)); - int_part = dc_fixpt_floor(data->inits.v) - data->viewport.y; - if (int_part < data->taps.v_taps) { - int int_adj = data->viewport.y >= (data->taps.v_taps - int_part) ? - (data->taps.v_taps - int_part) : data->viewport.y; - data->viewport.y -= int_adj; - data->viewport.height += int_adj; - int_part += int_adj; - } else if (int_part > data->taps.v_taps) { - data->viewport.y += int_part - data->taps.v_taps; - data->viewport.height -= int_part - data->taps.v_taps; - int_part = data->taps.v_taps; - } - data->inits.v.value &= 0xffffffff; - data->inits.v = dc_fixpt_add_int(data->inits.v, int_part); - } - - if (data->viewport_c.y) { - int int_part; +} - data->inits.v_c = dc_fixpt_add(data->inits.v_c, dc_fixpt_mul_int( - data->ratios.vert_c, data->recout.y - recout_full->y)); - int_part = dc_fixpt_floor(data->inits.v_c) - data->viewport_c.y; - if (int_part < data->taps.v_taps_c) { - int int_adj = data->viewport_c.y >= (data->taps.v_taps_c - int_part) ? - (data->taps.v_taps_c - int_part) : data->viewport_c.y; - data->viewport_c.y -= int_adj; - data->viewport_c.height += int_adj; - int_part += int_adj; - } else if (int_part > data->taps.v_taps_c) { - data->viewport_c.y += int_part - data->taps.v_taps_c; - data->viewport_c.height -= int_part - data->taps.v_taps_c; - int_part = data->taps.v_taps_c; - } - data->inits.v_c.value &= 0xffffffff; - data->inits.v_c = dc_fixpt_add_int(data->inits.v_c, int_part); - } - } else { - /* Adjust for non-0 viewport offset */ - if (data->viewport.y) { - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.v, data->ratios.vert)); +static void calculate_inits_and_adj_vp(struct pipe_ctx *pipe_ctx) +{ + const struct dc_plane_state *plane_state = pipe_ctx->plane_state; + const struct dc_stream_state *stream = pipe_ctx->stream; + struct scaler_data *data = &pipe_ctx->plane_res.scl_data; + struct rect src = pipe_ctx->plane_state->src_rect; + int recout_skip_h, recout_skip_v, surf_size_h, surf_size_v; + int vpc_div = (data->format == PIXEL_FORMAT_420BPP8 + || data->format == PIXEL_FORMAT_420BPP10) ? 2 : 1; + bool orthogonal_rotation, flip_vert_scan_dir, flip_horz_scan_dir; - int_part = int_part > 0 ? int_part : 0; - data->viewport.height += int_part < data->viewport.y ? int_part : data->viewport.y; - data->viewport.y -= int_part < data->viewport.y ? int_part : data->viewport.y; - } - if (data->viewport_c.y) { - int int_part = dc_fixpt_floor( - dc_fixpt_sub(data->inits.v_c, data->ratios.vert_c)); + /* + * Need to calculate the scan direction for viewport to make adjustments + */ + get_vp_scan_direction( + plane_state->rotation, + plane_state->horizontal_mirror, + &orthogonal_rotation, + &flip_vert_scan_dir, + &flip_horz_scan_dir); + + /* Calculate src rect rotation adjusted to recout space */ + surf_size_h = src.x + src.width; + surf_size_v = src.y + src.height; + if (flip_horz_scan_dir) + src.x = 0; + if (flip_vert_scan_dir) + src.y = 0; + if (orthogonal_rotation) { + swap(src.x, src.y); + swap(src.width, src.height); + } - int_part = int_part > 0 ? int_part : 0; - data->viewport_c.height += int_part < data->viewport_c.y ? int_part : data->viewport_c.y; - data->viewport_c.y -= int_part < data->viewport_c.y ? int_part : data->viewport_c.y; - } + /* Recout matching initial vp offset = recout_offset - (stream dst offset + + * ((surf dst offset - stream src offset) * 1/ stream scaling ratio) + * - (surf surf_src offset * 1/ full scl ratio)) + */ + recout_skip_h = data->recout.x - (stream->dst.x + (plane_state->dst_rect.x - stream->src.x) + * stream->dst.width / stream->src.width - + src.x * plane_state->dst_rect.width / src.width + * stream->dst.width / stream->src.width); + recout_skip_v = data->recout.y - (stream->dst.y + (plane_state->dst_rect.y - stream->src.y) + * stream->dst.height / stream->src.height - + src.y * plane_state->dst_rect.height / src.height + * stream->dst.height / stream->src.height); + if (orthogonal_rotation) + swap(recout_skip_h, recout_skip_v); + /* + * Init calculated according to formula: + * init = (scaling_ratio + number_of_taps + 1) / 2 + * init_bot = init + scaling_ratio + * init_c = init + truncated_vp_c_offset(from calculate viewport) + */ + data->inits.h = dc_fixpt_truncate(dc_fixpt_div_int( + dc_fixpt_add_int(data->ratios.horz, data->taps.h_taps + 1), 2), 19); - /* Adjust for viewport end clip-off */ - if ((data->viewport.y + data->viewport.height) < (src.y + src.height)) { - int int_part; - int end_offset = src.y + src.height - - data->viewport.y - data->viewport.height; + data->inits.h_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.h_c, dc_fixpt_div_int( + dc_fixpt_add_int(data->ratios.horz_c, data->taps.h_taps_c + 1), 2)), 19); - /* - * this is init if vp had no offset, keep in mind this is from the - * right side of vp due to scan direction - */ - data->inits.v = dc_fixpt_add(data->inits.v, dc_fixpt_mul_int( - data->ratios.vert, data->recout.y - recout_full->y)); - /* - * this is the difference between first pixel of viewport available to read - * and init position, taking into account scan direction - */ - int_part = dc_fixpt_floor(data->inits.v) - end_offset; - if (int_part < data->taps.v_taps) { - int int_adj = end_offset >= (data->taps.v_taps - int_part) ? - (data->taps.v_taps - int_part) : end_offset; - data->viewport.height += int_adj; - int_part += int_adj; - } else if (int_part > data->taps.v_taps) { - data->viewport.height += int_part - data->taps.v_taps; - int_part = data->taps.v_taps; - } - data->inits.v.value &= 0xffffffff; - data->inits.v = dc_fixpt_add_int(data->inits.v, int_part); - } + data->inits.v = dc_fixpt_truncate(dc_fixpt_div_int( + dc_fixpt_add_int(data->ratios.vert, data->taps.v_taps + 1), 2), 19); - if ((data->viewport_c.y + data->viewport_c.height) < (src.y + src.height) / vpc_div) { - int int_part; - int end_offset = (src.y + src.height) / vpc_div - - data->viewport_c.y - data->viewport_c.height; + data->inits.v_c = dc_fixpt_truncate(dc_fixpt_add(data->inits.v_c, dc_fixpt_div_int( + dc_fixpt_add_int(data->ratios.vert_c, data->taps.v_taps_c + 1), 2)), 19); - /* - * this is init if vp had no offset, keep in mind this is from the - * right side of vp due to scan direction - */ - data->inits.v_c = dc_fixpt_add(data->inits.v_c, dc_fixpt_mul_int( - data->ratios.vert_c, data->recout.y - recout_full->y)); - /* - * this is the difference between first pixel of viewport available to read - * and init position, taking into account scan direction - */ - int_part = dc_fixpt_floor(data->inits.v_c) - end_offset; - if (int_part < data->taps.v_taps_c) { - int int_adj = end_offset >= (data->taps.v_taps_c - int_part) ? - (data->taps.v_taps_c - int_part) : end_offset; - data->viewport_c.height += int_adj; - int_part += int_adj; - } else if (int_part > data->taps.v_taps_c) { - data->viewport_c.height += int_part - data->taps.v_taps_c; - int_part = data->taps.v_taps_c; - } - data->inits.v_c.value &= 0xffffffff; - data->inits.v_c = dc_fixpt_add_int(data->inits.v_c, int_part); - } - } + /* + * Taps, inits and scaling ratios are in recout space need to rotate + * to viewport rotation before adjustment + */ + adjust_vp_and_init_for_seamless_clip( + flip_horz_scan_dir, + recout_skip_h, + surf_size_h, + orthogonal_rotation ? data->taps.v_taps : data->taps.h_taps, + orthogonal_rotation ? data->ratios.vert : data->ratios.horz, + orthogonal_rotation ? &data->inits.v : &data->inits.h, + &data->viewport.x, + &data->viewport.width); + adjust_vp_and_init_for_seamless_clip( + flip_horz_scan_dir, + recout_skip_h, + surf_size_h / vpc_div, + orthogonal_rotation ? data->taps.v_taps_c : data->taps.h_taps_c, + orthogonal_rotation ? data->ratios.vert_c : data->ratios.horz_c, + orthogonal_rotation ? &data->inits.v_c : &data->inits.h_c, + &data->viewport_c.x, + &data->viewport_c.width); + adjust_vp_and_init_for_seamless_clip( + flip_vert_scan_dir, + recout_skip_v, + surf_size_v, + orthogonal_rotation ? data->taps.h_taps : data->taps.v_taps, + orthogonal_rotation ? data->ratios.horz : data->ratios.vert, + orthogonal_rotation ? &data->inits.h : &data->inits.v, + &data->viewport.y, + &data->viewport.height); + adjust_vp_and_init_for_seamless_clip( + flip_vert_scan_dir, + recout_skip_v, + surf_size_v / vpc_div, + orthogonal_rotation ? data->taps.h_taps_c : data->taps.v_taps_c, + orthogonal_rotation ? data->ratios.horz_c : data->ratios.vert_c, + orthogonal_rotation ? &data->inits.h_c : &data->inits.v_c, + &data->viewport_c.y, + &data->viewport_c.height); /* Interlaced inits based on final vert inits */ data->inits.v_bot = dc_fixpt_add(data->inits.v, data->ratios.vert); data->inits.v_c_bot = dc_fixpt_add(data->inits.v_c, data->ratios.vert_c); - if (pipe_ctx->plane_state->rotation == ROTATION_ANGLE_90 || - pipe_ctx->plane_state->rotation == ROTATION_ANGLE_270) { - rect_swap_helper(&data->viewport_c); - rect_swap_helper(&data->viewport); - } } bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx) { const struct dc_plane_state *plane_state = pipe_ctx->plane_state; struct dc_crtc_timing *timing = &pipe_ctx->stream->timing; - struct rect recout_full = { 0 }; bool res = false; DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger); /* Important: scaling ratio calculation requires pixel format, @@ -1105,7 +931,7 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx) if (pipe_ctx->plane_res.scl_data.viewport.height < 16 || pipe_ctx->plane_res.scl_data.viewport.width < 16) return false; - calculate_recout(pipe_ctx, &recout_full); + calculate_recout(pipe_ctx); /** * Setting line buffer pixel depth to 24bpp yields banding @@ -1146,7 +972,7 @@ bool resource_build_scaling_params(struct pipe_ctx *pipe_ctx) if (res) /* May need to re-check lb size after this in some obscure scenario */ - calculate_inits_and_adj_vp(pipe_ctx, &recout_full); + calculate_inits_and_adj_vp(pipe_ctx); DC_LOG_SCALER( "%s: Viewport:\nheight:%d width:%d x:%d " @@ -1356,6 +1182,9 @@ bool dc_add_plane_to_context( return false; } + tail_pipe = resource_get_tail_pipe_for_stream(&context->res_ctx, stream); + ASSERT(tail_pipe); + free_pipe = acquire_free_pipe_for_stream(context, pool, stream); #if defined(CONFIG_DRM_AMD_DC_DCN1_0) @@ -1373,10 +1202,6 @@ bool dc_add_plane_to_context( free_pipe->plane_state = plane_state; if (head_pipe != free_pipe) { - - tail_pipe = resource_get_tail_pipe_for_stream(&context->res_ctx, stream); - ASSERT(tail_pipe); - free_pipe->stream_res.tg = tail_pipe->stream_res.tg; free_pipe->stream_res.abm = tail_pipe->stream_res.abm; free_pipe->stream_res.opp = tail_pipe->stream_res.opp; @@ -1622,6 +1447,14 @@ static bool are_stream_backends_same( return true; } +/** + * dc_is_stream_unchanged() - Compare two stream states for equivalence. + * + * Checks if there a difference between the two states + * that would require a mode change. + * + * Does not compare cursor position or attributes. + */ bool dc_is_stream_unchanged( struct dc_stream_state *old_stream, struct dc_stream_state *stream) { @@ -1632,6 +1465,9 @@ bool dc_is_stream_unchanged( return true; } +/** + * dc_is_stream_scaling_unchanged() - Compare scaling rectangles of two streams. + */ bool dc_is_stream_scaling_unchanged( struct dc_stream_state *old_stream, struct dc_stream_state *stream) { @@ -1791,16 +1627,19 @@ bool resource_is_stream_unchanged( return false; } +/** + * dc_add_stream_to_ctx() - Add a new dc_stream_state to a dc_state. + */ enum dc_status dc_add_stream_to_ctx( struct dc *dc, struct dc_state *new_ctx, struct dc_stream_state *stream) { - struct dc_context *dc_ctx = dc->ctx; enum dc_status res; + DC_LOGGER_INIT(dc->ctx->logger); if (new_ctx->stream_count >= dc->res_pool->timing_generator_count) { - DC_ERROR("Max streams reached, can't add stream %p !\n", stream); + DC_LOG_WARNING("Max streams reached, can't add stream %p !\n", stream); return DC_ERROR_UNEXPECTED; } @@ -1810,11 +1649,14 @@ enum dc_status dc_add_stream_to_ctx( res = dc->res_pool->funcs->add_stream_to_ctx(dc, new_ctx, stream); if (res != DC_OK) - DC_ERROR("Adding stream %p to context failed with err %d!\n", stream, res); + DC_LOG_WARNING("Adding stream %p to context failed with err %d!\n", stream, res); return res; } +/** + * dc_remove_stream_from_ctx() - Remove a stream from a dc_state. + */ enum dc_status dc_remove_stream_from_ctx( struct dc *dc, struct dc_state *new_ctx, @@ -1976,6 +1818,8 @@ enum dc_status resource_map_pool_resources( } */ + calculate_phy_pix_clks(stream); + /* acquire new resources */ pipe_idx = acquire_first_free_pipe(&context->res_ctx, pool, stream); @@ -2033,6 +1877,12 @@ enum dc_status resource_map_pool_resources( return DC_ERROR_UNEXPECTED; } +/** + * dc_resource_state_copy_construct_current() - Creates a new dc_state from existing state + * Is a shallow copy. Increments refcounts on existing streams and planes. + * @dc: copy out of dc->current_state + * @dst_ctx: copy into this + */ void dc_resource_state_copy_construct_current( const struct dc *dc, struct dc_state *dst_ctx) @@ -2048,6 +1898,14 @@ void dc_resource_state_construct( dst_ctx->dccg = dc->res_pool->clk_mgr; } +/** + * dc_validate_global_state() - Determine if HW can support a given state + * Checks HW resource availability and bandwidth requirement. + * @dc: dc struct for this driver + * @new_ctx: state to be validated + * + * Return: DC_OK if the result can be programmed. Otherwise, an error code. + */ enum dc_status dc_validate_global_state( struct dc *dc, struct dc_state *new_ctx) @@ -2375,113 +2233,15 @@ static void set_vendor_info_packet( struct dc_info_packet *info_packet, struct dc_stream_state *stream) { - uint32_t length = 0; - bool hdmi_vic_mode = false; - uint8_t checksum = 0; - uint32_t i = 0; - enum dc_timing_3d_format format; - // Can be different depending on packet content /*todo*/ - // unsigned int length = pPathMode->dolbyVision ? 24 : 5; - - info_packet->valid = false; - - format = stream->timing.timing_3d_format; - if (stream->view_format == VIEW_3D_FORMAT_NONE) - format = TIMING_3D_FORMAT_NONE; - - /* Can be different depending on packet content */ - length = 5; - - if (stream->timing.hdmi_vic != 0 - && stream->timing.h_total >= 3840 - && stream->timing.v_total >= 2160) - hdmi_vic_mode = true; - - /* According to HDMI 1.4a CTS, VSIF should be sent - * for both 3D stereo and HDMI VIC modes. - * For all other modes, there is no VSIF sent. */ + /* SPD info packet for FreeSync */ - if (format == TIMING_3D_FORMAT_NONE && !hdmi_vic_mode) + /* Check if Freesync is supported. Return if false. If true, + * set the corresponding bit in the info packet + */ + if (!stream->vsp_infopacket.valid) return; - /* 24bit IEEE Registration identifier (0x000c03). LSB first. */ - info_packet->sb[1] = 0x03; - info_packet->sb[2] = 0x0C; - info_packet->sb[3] = 0x00; - - /*PB4: 5 lower bytes = 0 (reserved). 3 higher bits = HDMI_Video_Format. - * The value for HDMI_Video_Format are: - * 0x0 (0b000) - No additional HDMI video format is presented in this - * packet - * 0x1 (0b001) - Extended resolution format present. 1 byte of HDMI_VIC - * parameter follows - * 0x2 (0b010) - 3D format indication present. 3D_Structure and - * potentially 3D_Ext_Data follows - * 0x3..0x7 (0b011..0b111) - reserved for future use */ - if (format != TIMING_3D_FORMAT_NONE) - info_packet->sb[4] = (2 << 5); - else if (hdmi_vic_mode) - info_packet->sb[4] = (1 << 5); - - /* PB5: If PB4 claims 3D timing (HDMI_Video_Format = 0x2): - * 4 lower bites = 0 (reserved). 4 higher bits = 3D_Structure. - * The value for 3D_Structure are: - * 0x0 - Frame Packing - * 0x1 - Field Alternative - * 0x2 - Line Alternative - * 0x3 - Side-by-Side (full) - * 0x4 - L + depth - * 0x5 - L + depth + graphics + graphics-depth - * 0x6 - Top-and-Bottom - * 0x7 - Reserved for future use - * 0x8 - Side-by-Side (Half) - * 0x9..0xE - Reserved for future use - * 0xF - Not used */ - switch (format) { - case TIMING_3D_FORMAT_HW_FRAME_PACKING: - case TIMING_3D_FORMAT_SW_FRAME_PACKING: - info_packet->sb[5] = (0x0 << 4); - break; - - case TIMING_3D_FORMAT_SIDE_BY_SIDE: - case TIMING_3D_FORMAT_SBS_SW_PACKED: - info_packet->sb[5] = (0x8 << 4); - length = 6; - break; - - case TIMING_3D_FORMAT_TOP_AND_BOTTOM: - case TIMING_3D_FORMAT_TB_SW_PACKED: - info_packet->sb[5] = (0x6 << 4); - break; - - default: - break; - } - - /*PB5: If PB4 is set to 0x1 (extended resolution format) - * fill PB5 with the correct HDMI VIC code */ - if (hdmi_vic_mode) - info_packet->sb[5] = stream->timing.hdmi_vic; - - /* Header */ - info_packet->hb0 = HDMI_INFOFRAME_TYPE_VENDOR; /* VSIF packet type. */ - info_packet->hb1 = 0x01; /* Version */ - - /* 4 lower bits = Length, 4 higher bits = 0 (reserved) */ - info_packet->hb2 = (uint8_t) (length); - - /* Calculate checksum */ - checksum = 0; - checksum += info_packet->hb0; - checksum += info_packet->hb1; - checksum += info_packet->hb2; - - for (i = 1; i <= length; i++) - checksum += info_packet->sb[i]; - - info_packet->sb[0] = (uint8_t) (0x100 - checksum); - - info_packet->valid = true; + *info_packet = stream->vsp_infopacket; } static void set_spd_info_packet( @@ -2537,10 +2297,6 @@ void dc_resource_state_destruct(struct dc_state *context) } } -/* - * Copy src_ctx into dst_ctx and retain all surfaces and streams referenced - * by the src_ctx - */ void dc_resource_state_copy_construct( const struct dc_state *src_ctx, struct dc_state *dst_ctx) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index e113439aaa86..66e5c4623a49 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -100,8 +100,6 @@ static void construct(struct dc_stream_state *stream, /* EDID CAP translation for HDMI 2.0 */ stream->timing.flags.LTE_340MCSC_SCRAMBLE = dc_sink_data->edid_caps.lte_340mcsc_scramble; - stream->status.link = stream->sink->link; - update_stream_signal(stream); stream->out_transfer_func = dc_create_transfer_func(); @@ -172,7 +170,7 @@ struct dc_stream_status *dc_stream_get_status( } /** - * Update the cursor attributes and set cursor surface address + * dc_stream_set_cursor_attributes() - Update cursor attributes and set cursor surface address */ bool dc_stream_set_cursor_attributes( struct dc_stream_state *stream, |