diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 124 |
1 files changed, 99 insertions, 25 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 49380ed3aeae..3ac6c7b65a45 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -720,6 +720,7 @@ void dce110_edp_wait_for_hpd_ready( struct dc_context *ctx = link->ctx; struct graphics_object_id connector = link->link_enc->connector; struct gpio *hpd; + struct dc_sink *sink = link->local_sink; bool edp_hpd_high = false; uint32_t time_elapsed = 0; uint32_t timeout = power_up ? @@ -752,6 +753,14 @@ void dce110_edp_wait_for_hpd_ready( return; } + if (sink != NULL) { + if (sink->edid_caps.panel_patch.extra_t3_ms > 0) { + int extra_t3_in_ms = sink->edid_caps.panel_patch.extra_t3_ms; + + msleep(extra_t3_in_ms); + } + } + dal_gpio_open(hpd, GPIO_MODE_INTERRUPT); /* wait until timeout or panel detected */ @@ -801,37 +810,66 @@ void dce110_edp_power_control( if (power_up != link->panel_cntl->funcs->is_panel_powered_on(link->panel_cntl)) { + + unsigned long long current_ts = dm_get_timestamp(ctx); + unsigned long long time_since_edp_poweroff_ms = + div64_u64(dm_get_elapse_time_in_ns( + ctx, + current_ts, + link->link_trace.time_stamp.edp_poweroff), 1000000); + unsigned long long time_since_edp_poweron_ms = + div64_u64(dm_get_elapse_time_in_ns( + ctx, + current_ts, + link->link_trace.time_stamp.edp_poweron), 1000000); + DC_LOG_HW_RESUME_S3( + "%s: transition: power_up=%d current_ts=%llu edp_poweroff=%llu edp_poweron=%llu time_since_edp_poweroff_ms=%llu time_since_edp_poweron_ms=%llu", + __func__, + power_up, + current_ts, + link->link_trace.time_stamp.edp_poweroff, + link->link_trace.time_stamp.edp_poweron, + time_since_edp_poweroff_ms, + time_since_edp_poweron_ms); + /* Send VBIOS command to prompt eDP panel power */ if (power_up) { - unsigned long long current_ts = dm_get_timestamp(ctx); - unsigned long long duration_in_ms = - div64_u64(dm_get_elapse_time_in_ns( - ctx, - current_ts, - link->link_trace.time_stamp.edp_poweroff), 1000000); - unsigned long long wait_time_ms = 0; - - /* max 500ms from LCDVDD off to on */ - unsigned long long edp_poweroff_time_ms = 500; + /* edp requires a min of 500ms from LCDVDD off to on */ + unsigned long long remaining_min_edp_poweroff_time_ms = 500; + /* add time defined by a patch, if any (usually patch extra_t12_ms is 0) */ if (link->local_sink != NULL) - edp_poweroff_time_ms = - 500 + link->local_sink->edid_caps.panel_patch.extra_t12_ms; - if (link->link_trace.time_stamp.edp_poweroff == 0) - wait_time_ms = edp_poweroff_time_ms; - else if (duration_in_ms < edp_poweroff_time_ms) - wait_time_ms = edp_poweroff_time_ms - duration_in_ms; - - if (wait_time_ms) { - msleep(wait_time_ms); - dm_output_to_console("%s: wait %lld ms to power on eDP.\n", - __func__, wait_time_ms); + remaining_min_edp_poweroff_time_ms += + link->local_sink->edid_caps.panel_patch.extra_t12_ms; + + /* Adjust remaining_min_edp_poweroff_time_ms if this is not the first time. */ + if (link->link_trace.time_stamp.edp_poweroff != 0) { + if (time_since_edp_poweroff_ms < remaining_min_edp_poweroff_time_ms) + remaining_min_edp_poweroff_time_ms = + remaining_min_edp_poweroff_time_ms - time_since_edp_poweroff_ms; + else + remaining_min_edp_poweroff_time_ms = 0; } + if (remaining_min_edp_poweroff_time_ms) { + DC_LOG_HW_RESUME_S3( + "%s: remaining_min_edp_poweroff_time_ms=%llu: begin wait.\n", + __func__, remaining_min_edp_poweroff_time_ms); + msleep(remaining_min_edp_poweroff_time_ms); + DC_LOG_HW_RESUME_S3( + "%s: remaining_min_edp_poweroff_time_ms=%llu: end wait.\n", + __func__, remaining_min_edp_poweroff_time_ms); + dm_output_to_console("%s: wait %lld ms to power on eDP.\n", + __func__, remaining_min_edp_poweroff_time_ms); + } else { + DC_LOG_HW_RESUME_S3( + "%s: remaining_min_edp_poweroff_time_ms=%llu: no wait required.\n", + __func__, remaining_min_edp_poweroff_time_ms); + } } DC_LOG_HW_RESUME_S3( - "%s: Panel Power action: %s\n", + "%s: BEGIN: Panel Power action: %s\n", __func__, (power_up ? "On":"Off")); cntl.action = power_up ? @@ -842,14 +880,36 @@ void dce110_edp_power_control( cntl.coherent = false; cntl.lanes_number = LANE_COUNT_FOUR; cntl.hpd_sel = link->link_enc->hpd_source; + + if (ctx->dc->ctx->dmub_srv && + ctx->dc->debug.dmub_command_table) { + if (cntl.action == TRANSMITTER_CONTROL_POWER_ON) + bp_result = ctx->dc_bios->funcs->enable_lvtma_control(ctx->dc_bios, + LVTMA_CONTROL_POWER_ON); + else + bp_result = ctx->dc_bios->funcs->enable_lvtma_control(ctx->dc_bios, + LVTMA_CONTROL_POWER_OFF); + } + bp_result = link_transmitter_control(ctx->dc_bios, &cntl); + DC_LOG_HW_RESUME_S3( + "%s: END: Panel Power action: %s bp_result=%u\n", + __func__, (power_up ? "On":"Off"), + bp_result); + if (!power_up) /*save driver power off time stamp*/ link->link_trace.time_stamp.edp_poweroff = dm_get_timestamp(ctx); else link->link_trace.time_stamp.edp_poweron = dm_get_timestamp(ctx); + DC_LOG_HW_RESUME_S3( + "%s: updated values: edp_poweroff=%llu edp_poweron=%llu\n", + __func__, + link->link_trace.time_stamp.edp_poweroff, + link->link_trace.time_stamp.edp_poweron); + if (bp_result != BP_RESULT_OK) DC_LOG_ERROR( "%s: Panel Power bp_result: %d\n", @@ -919,8 +979,21 @@ void dce110_edp_backlight_control( /*edp 1.2*/ if (cntl.action == TRANSMITTER_CONTROL_BACKLIGHT_ON) edp_receiver_ready_T7(link); + + if (ctx->dc->ctx->dmub_srv && + ctx->dc->debug.dmub_command_table) { + if (cntl.action == TRANSMITTER_CONTROL_BACKLIGHT_ON) + ctx->dc_bios->funcs->enable_lvtma_control(ctx->dc_bios, + LVTMA_CONTROL_LCD_BLON); + else + ctx->dc_bios->funcs->enable_lvtma_control(ctx->dc_bios, + LVTMA_CONTROL_LCD_BLOFF); + } + link_transmitter_control(ctx->dc_bios, &cntl); + + if (enable && link->dpcd_sink_ext_caps.bits.oled) msleep(OLED_POST_T7_DELAY); @@ -1581,7 +1654,7 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) // enable fastboot if backend is enabled on eDP if (edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc)) { /* Set optimization flag on eDP stream*/ - if (edp_stream) { + if (edp_stream && edp_link->link_status.link_active) { edp_stream->apply_edp_fast_boot_optimization = true; can_apply_edp_fast_boot = true; } @@ -2664,7 +2737,7 @@ static void program_output_csc(struct dc *dc, } } -void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx) +static void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx) { struct dc_cursor_position pos_cpy = pipe_ctx->stream->cursor_position; struct input_pixel_processor *ipp = pipe_ctx->plane_res.ipp; @@ -2709,7 +2782,7 @@ void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx) mi->funcs->set_cursor_position(mi, &pos_cpy, ¶m); } -void dce110_set_cursor_attribute(struct pipe_ctx *pipe_ctx) +static void dce110_set_cursor_attribute(struct pipe_ctx *pipe_ctx) { struct dc_cursor_attributes *attributes = &pipe_ctx->stream->cursor_attributes; @@ -2817,6 +2890,7 @@ static const struct hw_sequencer_funcs dce110_funcs = { .setup_stereo = NULL, .set_avmute = dce110_set_avmute, .wait_for_mpcc_disconnect = dce110_wait_for_mpcc_disconnect, + .edp_backlight_control = dce110_edp_backlight_control, .edp_power_control = dce110_edp_power_control, .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready, .set_cursor_position = dce110_set_cursor_position, |