diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c | 36 |
1 files changed, 23 insertions, 13 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c index 477ab9222216..a9db372688ff 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.c @@ -85,6 +85,7 @@ static const struct link_encoder_funcs dcn10_lnk_enc_funcs = { .enable_hpd = dcn10_link_encoder_enable_hpd, .disable_hpd = dcn10_link_encoder_disable_hpd, .is_dig_enabled = dcn10_is_dig_enabled, + .get_dig_frontend = dcn10_get_dig_frontend, .destroy = dcn10_link_encoder_destroy }; @@ -440,7 +441,7 @@ static uint8_t get_frontend_source( } } -void configure_encoder( +void enc1_configure_encoder( struct dcn10_link_encoder *enc10, const struct dc_link_settings *link_settings) { @@ -495,6 +496,15 @@ bool dcn10_is_dig_enabled(struct link_encoder *enc) return value; } +unsigned int dcn10_get_dig_frontend(struct link_encoder *enc) +{ + struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc); + uint32_t value; + + REG_GET(DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, &value); + return value; +} + static void link_encoder_disable(struct dcn10_link_encoder *enc10) { /* reset training pattern */ @@ -543,12 +553,12 @@ bool dcn10_link_encoder_validate_dvi_output( if ((connector_signal == SIGNAL_TYPE_DVI_SINGLE_LINK || connector_signal == SIGNAL_TYPE_HDMI_TYPE_A) && signal != SIGNAL_TYPE_HDMI_TYPE_A && - crtc_timing->pix_clk_khz > TMDS_MAX_PIXEL_CLOCK) + crtc_timing->pix_clk_100hz > (TMDS_MAX_PIXEL_CLOCK * 10)) return false; - if (crtc_timing->pix_clk_khz < TMDS_MIN_PIXEL_CLOCK) + if (crtc_timing->pix_clk_100hz < (TMDS_MIN_PIXEL_CLOCK * 10)) return false; - if (crtc_timing->pix_clk_khz > max_pixel_clock) + if (crtc_timing->pix_clk_100hz > (max_pixel_clock * 10)) return false; /* DVI supports 6/8bpp single-link and 10/16bpp dual-link */ @@ -571,7 +581,7 @@ bool dcn10_link_encoder_validate_dvi_output( static bool dcn10_link_encoder_validate_hdmi_output( const struct dcn10_link_encoder *enc10, const struct dc_crtc_timing *crtc_timing, - int adjusted_pix_clk_khz) + int adjusted_pix_clk_100hz) { enum dc_color_depth max_deep_color = enc10->base.features.max_hdmi_deep_color; @@ -581,11 +591,11 @@ static bool dcn10_link_encoder_validate_hdmi_output( if (crtc_timing->display_color_depth < COLOR_DEPTH_888) return false; - if (adjusted_pix_clk_khz < TMDS_MIN_PIXEL_CLOCK) + if (adjusted_pix_clk_100hz < (TMDS_MIN_PIXEL_CLOCK * 10)) return false; - if ((adjusted_pix_clk_khz == 0) || - (adjusted_pix_clk_khz > enc10->base.features.max_hdmi_pixel_clock)) + if ((adjusted_pix_clk_100hz == 0) || + (adjusted_pix_clk_100hz > (enc10->base.features.max_hdmi_pixel_clock * 10))) return false; /* DCE11 HW does not support 420 */ @@ -594,7 +604,7 @@ static bool dcn10_link_encoder_validate_hdmi_output( return false; if (!enc10->base.features.flags.bits.HDMI_6GB_EN && - adjusted_pix_clk_khz >= 300000) + adjusted_pix_clk_100hz >= 3000000) return false; if (enc10->base.ctx->dc->debug.hdmi20_disable && crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR420) @@ -738,7 +748,7 @@ bool dcn10_link_encoder_validate_output_with_stream( case SIGNAL_TYPE_DVI_DUAL_LINK: is_valid = dcn10_link_encoder_validate_dvi_output( enc10, - stream->sink->link->connector_signal, + stream->link->connector_signal, stream->signal, &stream->timing); break; @@ -746,7 +756,7 @@ bool dcn10_link_encoder_validate_output_with_stream( is_valid = dcn10_link_encoder_validate_hdmi_output( enc10, &stream->timing, - stream->phy_pix_clk); + stream->phy_pix_clk * 10); break; case SIGNAL_TYPE_DISPLAY_PORT: case SIGNAL_TYPE_DISPLAY_PORT_MST: @@ -910,7 +920,7 @@ void dcn10_link_encoder_enable_dp_output( * but it's not passed to asic_control. * We need to set number of lanes manually. */ - configure_encoder(enc10, link_settings); + enc1_configure_encoder(enc10, link_settings); cntl.action = TRANSMITTER_CONTROL_ENABLE; cntl.engine_id = enc->preferred_engine; @@ -949,7 +959,7 @@ void dcn10_link_encoder_enable_dp_mst_output( * but it's not passed to asic_control. * We need to set number of lanes manually. */ - configure_encoder(enc10, link_settings); + enc1_configure_encoder(enc10, link_settings); cntl.action = TRANSMITTER_CONTROL_ENABLE; cntl.engine_id = ENGINE_ID_UNKNOWN; |