1 files changed, 209 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_link_encoder.c
new file mode 100644
index 000000000000..a65e8f7801db
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_link_encoder.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+
+#include "core_types.h"
+#include "link_encoder.h"
+#include "dcn201_link_encoder.h"
+#include "stream_encoder.h"
+#include "i2caux_interface.h"
+#include "dc_bios_types.h"
+
+#include "gpio_service_interface.h"
+
+#define CTX \
+	enc10->base.ctx
+
+#define DC_LOGGER \
+	enc10->base.ctx->logger
+
+#define REG(reg)\
+	(enc10->link_regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+	enc10->link_shift->field_name, enc10->link_mask->field_name
+
+#define IND_REG(index) \
+	(enc10->link_regs->index)
+
+void dcn201_link_encoder_get_max_link_cap(struct link_encoder *enc,
+	struct dc_link_settings *link_settings)
+{
+	uint32_t value1, value2;
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
+	dcn10_link_encoder_get_max_link_cap(enc, link_settings);
+	REG_GET_2(RDPCSTX_PHY_CNTL2, RDPCS_PHY_DPALT_DISABLE, &value1,
+		 RDPCS_PHY_DPALT_DP4, &value2);
+	/*limit to combo_phy*/
+	if (enc->usbc_combo_phy) {
+		if (!value1 && !value2 && link_settings->lane_count > LANE_COUNT_TWO)
+			link_settings->lane_count = LANE_COUNT_TWO;
+	}
+}
+
+bool dcn201_link_encoder_is_in_alt_mode(struct link_encoder *enc)
+{
+	uint32_t value;
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
+	REG_GET(RDPCSTX_PHY_CNTL2, RDPCS_PHY_DPALT_DISABLE, &value);
+
+	// if value == 1 alt mode is disabled, otherwise it is enabled
+	return !value;
+}
+
+static const struct link_encoder_funcs dcn201_link_enc_funcs = {
+	.read_state = link_enc2_read_state,
+	.validate_output_with_stream =
+		dcn10_link_encoder_validate_output_with_stream,
+	.hw_init = enc2_hw_init,
+	.setup = dcn10_link_encoder_setup,
+	.enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
+	.enable_dp_output = dcn10_link_encoder_enable_dp_output,
+	.enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
+	.disable_output = dcn10_link_encoder_disable_output,
+	.dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
+	.dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
+	.update_mst_stream_allocation_table =
+		dcn10_link_encoder_update_mst_stream_allocation_table,
+	.psr_program_dp_dphy_fast_training =
+			dcn10_psr_program_dp_dphy_fast_training,
+	.psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
+	.connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
+	.enable_hpd = dcn10_link_encoder_enable_hpd,
+	.disable_hpd = dcn10_link_encoder_disable_hpd,
+	.is_dig_enabled = dcn10_is_dig_enabled,
+	.destroy = dcn10_link_encoder_destroy,
+	.fec_set_enable = enc2_fec_set_enable,
+	.fec_set_ready = enc2_fec_set_ready,
+	.get_dig_frontend = dcn10_get_dig_frontend,
+	.fec_is_active = enc2_fec_is_active,
+	.is_in_alt_mode = dcn201_link_encoder_is_in_alt_mode,
+	.get_max_link_cap = dcn201_link_encoder_get_max_link_cap,
+};
+
+void dcn201_link_encoder_construct(
+	struct dcn20_link_encoder *enc20,
+	const struct encoder_init_data *init_data,
+	const struct encoder_feature_support *enc_features,
+	const struct dcn10_link_enc_registers *link_regs,
+	const struct dcn10_link_enc_aux_registers *aux_regs,
+	const struct dcn10_link_enc_hpd_registers *hpd_regs,
+	const struct dcn10_link_enc_shift *link_shift,
+	const struct dcn10_link_enc_mask *link_mask)
+{
+	struct bp_encoder_cap_info bp_cap_info = {0};
+	const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
+	enum bp_result result = BP_RESULT_OK;
+	struct dcn10_link_encoder *enc10 = &enc20->enc10;
+
+	enc10->base.funcs = &dcn201_link_enc_funcs;
+	enc10->base.ctx = init_data->ctx;
+	enc10->base.id = init_data->encoder;
+
+	enc10->base.hpd_source = init_data->hpd_source;
+	enc10->base.connector = init_data->connector;
+
+	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+
+	enc10->base.features = *enc_features;
+
+	enc10->base.transmitter = init_data->transmitter;
+
+	/* set the flag to indicate whether driver poll the I2C data pin
+	 * while doing the DP sink detect
+	 */
+
+	/* if (dal_adapter_service_is_feature_supported(as,
+	 * FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
+	 * enc10->base.features.flags.bits.
+	 * DP_SINK_DETECT_POLL_DATA_PIN = true;
+	 */
+
+	enc10->base.output_signals =
+		SIGNAL_TYPE_DVI_SINGLE_LINK |
+		SIGNAL_TYPE_DVI_DUAL_LINK |
+		SIGNAL_TYPE_LVDS |
+		SIGNAL_TYPE_DISPLAY_PORT |
+		SIGNAL_TYPE_DISPLAY_PORT_MST |
+		SIGNAL_TYPE_EDP |
+		SIGNAL_TYPE_HDMI_TYPE_A;
+
+	/* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
+	 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
+	 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
+	 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
+	 * Prefer DIG assignment is decided by board design.
+	 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
+	 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
+	 * By this, adding DIGG should not hurt DCE 8.0.
+	 * This will let DCE 8.1 share DCE 8.0 as much as possible
+	 */
+
+	enc10->link_regs = link_regs;
+	enc10->aux_regs = aux_regs;
+	enc10->hpd_regs = hpd_regs;
+	enc10->link_shift = link_shift;
+	enc10->link_mask = link_mask;
+
+	switch (enc10->base.transmitter) {
+	case TRANSMITTER_UNIPHY_A:
+		enc10->base.preferred_engine = ENGINE_ID_DIGA;
+	break;
+	case TRANSMITTER_UNIPHY_B:
+		enc10->base.preferred_engine = ENGINE_ID_DIGB;
+	break;
+	default:
+		ASSERT_CRITICAL(false);
+		enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+	}
+
+	/* default to one to mirror Windows behavior */
+	enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
+
+	result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
+						enc10->base.id, &bp_cap_info);
+
+	/* Override features with DCE-specific values */
+	if (result == BP_RESULT_OK) {
+		enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
+				bp_cap_info.DP_HBR2_EN;
+		enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
+				bp_cap_info.DP_HBR3_EN;
+		enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
+		enc10->base.features.flags.bits.DP_IS_USB_C =
+				bp_cap_info.DP_IS_USB_C;
+	} else {
+		DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
+				__func__,
+				result);
+	}
+	if (enc10->base.ctx->dc->debug.hdmi20_disable) {
+		enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
+	}
+}