diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 108 |
1 files changed, 87 insertions, 21 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c index d38341f68b17..8d9d96c39808 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c @@ -250,6 +250,7 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c uint32_t total_lines = 0; uint32_t lines_per_way = 0; uint32_t num_ways = 0; + uint32_t prev_addr_low = 0; for (i = 0; i < ctx->stream_count; i++) { stream = ctx->streams[i]; @@ -267,10 +268,20 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c plane = ctx->stream_status[i].plane_states[j]; // Calculate total surface size - surface_size = plane->plane_size.surface_pitch * + if (prev_addr_low != plane->address.grph.addr.u.low_part) { + /* if plane address are different from prev FB, then userspace allocated separate FBs*/ + surface_size += plane->plane_size.surface_pitch * plane->plane_size.surface_size.height * (plane->format >= SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 ? 8 : 4); + prev_addr_low = plane->address.grph.addr.u.low_part; + } else { + /* We have the same fb for all the planes. + * Xorg always creates one giant fb that holds all surfaces, + * so allocating it once is sufficient. + * */ + continue; + } // Convert surface size + starting address to number of cache lines required // (alignment accounted for) cache_lines_used += dcn32_cache_lines_for_surface(dc, surface_size, @@ -284,24 +295,38 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c } // Include cursor size for CAB allocation - if (stream->cursor_position.enable && plane->address.grph.cursor_cache_addr.quad_part) { - cursor_size = dc->caps.max_cursor_size * dc->caps.max_cursor_size; - switch (stream->cursor_attributes.color_format) { - case CURSOR_MODE_MONO: - cursor_size /= 2; - break; - case CURSOR_MODE_COLOR_1BIT_AND: - case CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA: - case CURSOR_MODE_COLOR_UN_PRE_MULTIPLIED_ALPHA: - cursor_size *= 4; - break; + for (j = 0; j < dc->res_pool->pipe_count; j++) { + struct pipe_ctx *pipe = &ctx->res_ctx.pipe_ctx[j]; + struct hubp *hubp = pipe->plane_res.hubp; - case CURSOR_MODE_COLOR_64BIT_FP_PRE_MULTIPLIED: - case CURSOR_MODE_COLOR_64BIT_FP_UN_PRE_MULTIPLIED: - cursor_size *= 8; - break; - } - cache_lines_used += dcn32_cache_lines_for_surface(dc, surface_size, + if (pipe->stream && pipe->plane_state && hubp) + /* Find the cursor plane and use the exact size instead of + * using the max for calculation + */ + if (hubp->curs_attr.width > 0) { + cursor_size = hubp->curs_attr.width * hubp->curs_attr.height; + break; + } + } + + switch (stream->cursor_attributes.color_format) { + case CURSOR_MODE_MONO: + cursor_size /= 2; + break; + case CURSOR_MODE_COLOR_1BIT_AND: + case CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA: + case CURSOR_MODE_COLOR_UN_PRE_MULTIPLIED_ALPHA: + cursor_size *= 4; + break; + + case CURSOR_MODE_COLOR_64BIT_FP_PRE_MULTIPLIED: + case CURSOR_MODE_COLOR_64BIT_FP_UN_PRE_MULTIPLIED: + cursor_size *= 8; + break; + } + + if (stream->cursor_position.enable && plane->address.grph.cursor_cache_addr.quad_part) { + cache_lines_used += dcn32_cache_lines_for_surface(dc, cursor_size, plane->address.grph.cursor_cache_addr.quad_part); } } @@ -314,13 +339,36 @@ static uint32_t dcn32_calculate_cab_allocation(struct dc *dc, struct dc_state *c if (cache_lines_used % lines_per_way > 0) num_ways++; + for (i = 0; i < ctx->stream_count; i++) { + stream = ctx->streams[i]; + for (j = 0; j < ctx->stream_status[i].plane_count; j++) { + plane = ctx->stream_status[i].plane_states[j]; + + if (stream->cursor_position.enable && plane && + !plane->address.grph.cursor_cache_addr.quad_part && + cursor_size > 16384) { + /* Cursor caching is not supported since it won't be on the same line. + * So we need an extra line to accommodate it. With large cursors and a single 4k monitor + * this case triggers corruption. If we're at the edge, then dont trigger display refresh + * from MALL. We only need to cache cursor if its greater that 64x64 at 4 bpp. + */ + num_ways++; + /* We only expect one cursor plane */ + break; + } + } + } + return num_ways; } bool dcn32_apply_idle_power_optimizations(struct dc *dc, bool enable) { union dmub_rb_cmd cmd; - uint8_t ways; + uint8_t ways, i; + int j; + bool stereo_in_use = false; + struct dc_plane_state *plane = NULL; if (!dc->ctx->dmub_srv) return false; @@ -349,7 +397,23 @@ bool dcn32_apply_idle_power_optimizations(struct dc *dc, bool enable) * and configure HUBP's to fetch from MALL */ ways = dcn32_calculate_cab_allocation(dc, dc->current_state); - if (ways <= dc->caps.cache_num_ways) { + + /* MALL not supported with Stereo3D. If any plane is using stereo, + * don't try to enter MALL. + */ + for (i = 0; i < dc->current_state->stream_count; i++) { + for (j = 0; j < dc->current_state->stream_status[i].plane_count; j++) { + plane = dc->current_state->stream_status[i].plane_states[j]; + + if (plane->address.type == PLN_ADDR_TYPE_GRPH_STEREO) { + stereo_in_use = true; + break; + } + } + if (stereo_in_use) + break; + } + if (ways <= dc->caps.cache_num_ways && !stereo_in_use) { memset(&cmd, 0, sizeof(cmd)); cmd.cab.header.type = DMUB_CMD__CAB_FOR_SS; cmd.cab.header.sub_type = DMUB_CMD__CAB_DCN_SS_FIT_IN_CAB; @@ -683,9 +747,11 @@ void dcn32_update_mall_sel(struct dc *dc, struct dc_state *context) if (pipe->stream->mall_stream_config.type == SUBVP_PHANTOM) { hubp->funcs->hubp_update_mall_sel(hubp, 1, false); } else { + // MALL not supported with Stereo3D hubp->funcs->hubp_update_mall_sel(hubp, num_ways <= dc->caps.cache_num_ways && - pipe->stream->link->psr_settings.psr_version == DC_PSR_VERSION_UNSUPPORTED ? 2 : 0, + pipe->stream->link->psr_settings.psr_version == DC_PSR_VERSION_UNSUPPORTED && + pipe->plane_state->address.type != PLN_ADDR_TYPE_GRPH_STEREO ? 2 : 0, cache_cursor); } } |