diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/analogix/analogix_dp_core.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1430 |
1 files changed, 1430 insertions, 0 deletions
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c new file mode 100644 index 000000000000..7699597070a1 --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -0,0 +1,1430 @@ +/* +* Analogix DP (Display Port) core interface driver. +* +* Copyright (C) 2012 Samsung Electronics Co., Ltd. +* Author: Jingoo Han <jg1.han@samsung.com> +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/component.h> +#include <linux/phy/phy.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_panel.h> + +#include <drm/bridge/analogix_dp.h> + +#include "analogix_dp_core.h" + +#define to_dp(nm) container_of(nm, struct analogix_dp_device, nm) + +struct bridge_init { + struct i2c_client *client; + struct device_node *node; +}; + +static void analogix_dp_init_dp(struct analogix_dp_device *dp) +{ + analogix_dp_reset(dp); + + analogix_dp_swreset(dp); + + analogix_dp_init_analog_param(dp); + analogix_dp_init_interrupt(dp); + + /* SW defined function Normal operation */ + analogix_dp_enable_sw_function(dp); + + analogix_dp_config_interrupt(dp); + analogix_dp_init_analog_func(dp); + + analogix_dp_init_hpd(dp); + analogix_dp_init_aux(dp); +} + +static int analogix_dp_detect_hpd(struct analogix_dp_device *dp) +{ + int timeout_loop = 0; + + while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) { + if (analogix_dp_get_plug_in_status(dp) == 0) + return 0; + + timeout_loop++; + usleep_range(10, 11); + } + + /* + * Some edp screen do not have hpd signal, so we can't just + * return failed when hpd plug in detect failed, DT property + * "force-hpd" would indicate whether driver need this. + */ + if (!dp->force_hpd) + return -ETIMEDOUT; + + /* + * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH + * will not work, so we need to give a force hpd action to + * set HPD_STATUS manually. + */ + dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n"); + + analogix_dp_force_hpd(dp); + + if (analogix_dp_get_plug_in_status(dp) != 0) { + dev_err(dp->dev, "failed to get hpd plug in status\n"); + return -EINVAL; + } + + dev_dbg(dp->dev, "success to get plug in status after force hpd\n"); + + return 0; +} + +static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data) +{ + int i; + unsigned char sum = 0; + + for (i = 0; i < EDID_BLOCK_LENGTH; i++) + sum = sum + edid_data[i]; + + return sum; +} + +static int analogix_dp_read_edid(struct analogix_dp_device *dp) +{ + unsigned char *edid = dp->edid; + unsigned int extend_block = 0; + unsigned char sum; + unsigned char test_vector; + int retval; + + /* + * EDID device address is 0x50. + * However, if necessary, you must have set upper address + * into E-EDID in I2C device, 0x30. + */ + + /* Read Extension Flag, Number of 128-byte EDID extension blocks */ + retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR, + EDID_EXTENSION_FLAG, + &extend_block); + if (retval) + return retval; + + if (extend_block > 0) { + dev_dbg(dp->dev, "EDID data includes a single extension!\n"); + + /* Read EDID data */ + retval = analogix_dp_read_bytes_from_i2c(dp, + I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + if (retval != 0) { + dev_err(dp->dev, "EDID Read failed!\n"); + return -EIO; + } + sum = analogix_dp_calc_edid_check_sum(edid); + if (sum != 0) { + dev_err(dp->dev, "EDID bad checksum!\n"); + return -EIO; + } + + /* Read additional EDID data */ + retval = analogix_dp_read_bytes_from_i2c(dp, + I2C_EDID_DEVICE_ADDR, + EDID_BLOCK_LENGTH, + EDID_BLOCK_LENGTH, + &edid[EDID_BLOCK_LENGTH]); + if (retval != 0) { + dev_err(dp->dev, "EDID Read failed!\n"); + return -EIO; + } + sum = analogix_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); + if (sum != 0) { + dev_err(dp->dev, "EDID bad checksum!\n"); + return -EIO; + } + + analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST, + &test_vector); + if (test_vector & DP_TEST_LINK_EDID_READ) { + analogix_dp_write_byte_to_dpcd(dp, + DP_TEST_EDID_CHECKSUM, + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); + analogix_dp_write_byte_to_dpcd(dp, + DP_TEST_RESPONSE, + DP_TEST_EDID_CHECKSUM_WRITE); + } + } else { + dev_info(dp->dev, "EDID data does not include any extensions.\n"); + + /* Read EDID data */ + retval = analogix_dp_read_bytes_from_i2c(dp, + I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, &edid[EDID_HEADER_PATTERN]); + if (retval != 0) { + dev_err(dp->dev, "EDID Read failed!\n"); + return -EIO; + } + sum = analogix_dp_calc_edid_check_sum(edid); + if (sum != 0) { + dev_err(dp->dev, "EDID bad checksum!\n"); + return -EIO; + } + + analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST, + &test_vector); + if (test_vector & DP_TEST_LINK_EDID_READ) { + analogix_dp_write_byte_to_dpcd(dp, + DP_TEST_EDID_CHECKSUM, edid[EDID_CHECKSUM]); + analogix_dp_write_byte_to_dpcd(dp, + DP_TEST_RESPONSE, DP_TEST_EDID_CHECKSUM_WRITE); + } + } + + dev_dbg(dp->dev, "EDID Read success!\n"); + return 0; +} + +static int analogix_dp_handle_edid(struct analogix_dp_device *dp) +{ + u8 buf[12]; + int i; + int retval; + + /* Read DPCD DP_DPCD_REV~RECEIVE_PORT1_CAP_1 */ + retval = analogix_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV, 12, buf); + if (retval) + return retval; + + /* Read EDID */ + for (i = 0; i < 3; i++) { + retval = analogix_dp_read_edid(dp); + if (!retval) + break; + } + + return retval; +} + +static void +analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp, + bool enable) +{ + u8 data; + + analogix_dp_read_byte_from_dpcd(dp, DP_LANE_COUNT_SET, &data); + + if (enable) + analogix_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET, + DP_LANE_COUNT_ENHANCED_FRAME_EN | + DPCD_LANE_COUNT_SET(data)); + else + analogix_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET, + DPCD_LANE_COUNT_SET(data)); +} + +static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp) +{ + u8 data; + int retval; + + analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data); + retval = DPCD_ENHANCED_FRAME_CAP(data); + + return retval; +} + +static void analogix_dp_set_enhanced_mode(struct analogix_dp_device *dp) +{ + u8 data; + + data = analogix_dp_is_enhanced_mode_available(dp); + analogix_dp_enable_rx_to_enhanced_mode(dp, data); + analogix_dp_enable_enhanced_mode(dp, data); +} + +static void analogix_dp_training_pattern_dis(struct analogix_dp_device *dp) +{ + analogix_dp_set_training_pattern(dp, DP_NONE); + + analogix_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_DISABLE); +} + +static void +analogix_dp_set_lane_lane_pre_emphasis(struct analogix_dp_device *dp, + int pre_emphasis, int lane) +{ + switch (lane) { + case 0: + analogix_dp_set_lane0_pre_emphasis(dp, pre_emphasis); + break; + case 1: + analogix_dp_set_lane1_pre_emphasis(dp, pre_emphasis); + break; + + case 2: + analogix_dp_set_lane2_pre_emphasis(dp, pre_emphasis); + break; + + case 3: + analogix_dp_set_lane3_pre_emphasis(dp, pre_emphasis); + break; + } +} + +static int analogix_dp_link_start(struct analogix_dp_device *dp) +{ + u8 buf[4]; + int lane, lane_count, pll_tries, retval; + + lane_count = dp->link_train.lane_count; + + dp->link_train.lt_state = CLOCK_RECOVERY; + dp->link_train.eq_loop = 0; + + for (lane = 0; lane < lane_count; lane++) + dp->link_train.cr_loop[lane] = 0; + + /* Set link rate and count as you want to establish*/ + analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate); + analogix_dp_set_lane_count(dp, dp->link_train.lane_count); + + /* Setup RX configuration */ + buf[0] = dp->link_train.link_rate; + buf[1] = dp->link_train.lane_count; + retval = analogix_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET, 2, buf); + if (retval) + return retval; + + /* Set TX pre-emphasis to minimum */ + for (lane = 0; lane < lane_count; lane++) + analogix_dp_set_lane_lane_pre_emphasis(dp, + PRE_EMPHASIS_LEVEL_0, lane); + + /* Wait for PLL lock */ + pll_tries = 0; + while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + if (pll_tries == DP_TIMEOUT_LOOP_COUNT) { + dev_err(dp->dev, "Wait for PLL lock timed out\n"); + return -ETIMEDOUT; + } + + pll_tries++; + usleep_range(90, 120); + } + + /* Set training pattern 1 */ + analogix_dp_set_training_pattern(dp, TRAINING_PTN1); + + /* Set RX training pattern */ + retval = analogix_dp_write_byte_to_dpcd(dp, + DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | DP_TRAINING_PATTERN_1); + if (retval) + return retval; + + for (lane = 0; lane < lane_count; lane++) + buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 | + DP_TRAIN_VOLTAGE_SWING_LEVEL_0; + + retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET, + lane_count, buf); + + return retval; +} + +static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane) +{ + int shift = (lane & 1) * 4; + u8 link_value = link_status[lane >> 1]; + + return (link_value >> shift) & 0xf; +} + +static int analogix_dp_clock_recovery_ok(u8 link_status[2], int lane_count) +{ + int lane; + u8 lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = analogix_dp_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return -EINVAL; + } + return 0; +} + +static int analogix_dp_channel_eq_ok(u8 link_status[2], u8 link_align, + int lane_count) +{ + int lane; + u8 lane_status; + + if ((link_align & DP_INTERLANE_ALIGN_DONE) == 0) + return -EINVAL; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = analogix_dp_get_lane_status(link_status, lane); + lane_status &= DP_CHANNEL_EQ_BITS; + if (lane_status != DP_CHANNEL_EQ_BITS) + return -EINVAL; + } + + return 0; +} + +static unsigned char +analogix_dp_get_adjust_request_voltage(u8 adjust_request[2], int lane) +{ + int shift = (lane & 1) * 4; + u8 link_value = adjust_request[lane >> 1]; + + return (link_value >> shift) & 0x3; +} + +static unsigned char analogix_dp_get_adjust_request_pre_emphasis( + u8 adjust_request[2], + int lane) +{ + int shift = (lane & 1) * 4; + u8 link_value = adjust_request[lane >> 1]; + + return ((link_value >> shift) & 0xc) >> 2; +} + +static void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp, + u8 training_lane_set, int lane) +{ + switch (lane) { + case 0: + analogix_dp_set_lane0_link_training(dp, training_lane_set); + break; + case 1: + analogix_dp_set_lane1_link_training(dp, training_lane_set); + break; + + case 2: + analogix_dp_set_lane2_link_training(dp, training_lane_set); + break; + + case 3: + analogix_dp_set_lane3_link_training(dp, training_lane_set); + break; + } +} + +static unsigned int +analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, + int lane) +{ + u32 reg; + + switch (lane) { + case 0: + reg = analogix_dp_get_lane0_link_training(dp); + break; + case 1: + reg = analogix_dp_get_lane1_link_training(dp); + break; + case 2: + reg = analogix_dp_get_lane2_link_training(dp); + break; + case 3: + reg = analogix_dp_get_lane3_link_training(dp); + break; + default: + WARN_ON(1); + return 0; + } + + return reg; +} + +static void analogix_dp_reduce_link_rate(struct analogix_dp_device *dp) +{ + analogix_dp_training_pattern_dis(dp); + analogix_dp_set_enhanced_mode(dp); + + dp->link_train.lt_state = FAILED; +} + +static void analogix_dp_get_adjust_training_lane(struct analogix_dp_device *dp, + u8 adjust_request[2]) +{ + int lane, lane_count; + u8 voltage_swing, pre_emphasis, training_lane; + + lane_count = dp->link_train.lane_count; + for (lane = 0; lane < lane_count; lane++) { + voltage_swing = analogix_dp_get_adjust_request_voltage( + adjust_request, lane); + pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis( + adjust_request, lane); + training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) | + DPCD_PRE_EMPHASIS_SET(pre_emphasis); + + if (voltage_swing == VOLTAGE_LEVEL_3) + training_lane |= DP_TRAIN_MAX_SWING_REACHED; + if (pre_emphasis == PRE_EMPHASIS_LEVEL_3) + training_lane |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + dp->link_train.training_lane[lane] = training_lane; + } +} + +static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp) +{ + int lane, lane_count, retval; + u8 voltage_swing, pre_emphasis, training_lane; + u8 link_status[2], adjust_request[2]; + + usleep_range(100, 101); + + lane_count = dp->link_train.lane_count; + + retval = analogix_dp_read_bytes_from_dpcd(dp, + DP_LANE0_1_STATUS, 2, link_status); + if (retval) + return retval; + + retval = analogix_dp_read_bytes_from_dpcd(dp, + DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request); + if (retval) + return retval; + + if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) { + /* set training pattern 2 for EQ */ + analogix_dp_set_training_pattern(dp, TRAINING_PTN2); + + retval = analogix_dp_write_byte_to_dpcd(dp, + DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_2); + if (retval) + return retval; + + dev_info(dp->dev, "Link Training Clock Recovery success\n"); + dp->link_train.lt_state = EQUALIZER_TRAINING; + } else { + for (lane = 0; lane < lane_count; lane++) { + training_lane = analogix_dp_get_lane_link_training( + dp, lane); + voltage_swing = analogix_dp_get_adjust_request_voltage( + adjust_request, lane); + pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis( + adjust_request, lane); + + if (DPCD_VOLTAGE_SWING_GET(training_lane) == + voltage_swing && + DPCD_PRE_EMPHASIS_GET(training_lane) == + pre_emphasis) + dp->link_train.cr_loop[lane]++; + + if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP || + voltage_swing == VOLTAGE_LEVEL_3 || + pre_emphasis == PRE_EMPHASIS_LEVEL_3) { + dev_err(dp->dev, "CR Max reached (%d,%d,%d)\n", + dp->link_train.cr_loop[lane], + voltage_swing, pre_emphasis); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + } + } + + analogix_dp_get_adjust_training_lane(dp, adjust_request); + + for (lane = 0; lane < lane_count; lane++) + analogix_dp_set_lane_link_training(dp, + dp->link_train.training_lane[lane], lane); + + retval = analogix_dp_write_bytes_to_dpcd(dp, + DP_TRAINING_LANE0_SET, lane_count, + dp->link_train.training_lane); + if (retval) + return retval; + + return retval; +} + +static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) +{ + int lane, lane_count, retval; + u32 reg; + u8 link_align, link_status[2], adjust_request[2]; + + usleep_range(400, 401); + + lane_count = dp->link_train.lane_count; + + retval = analogix_dp_read_bytes_from_dpcd(dp, + DP_LANE0_1_STATUS, 2, link_status); + if (retval) + return retval; + + if (analogix_dp_clock_recovery_ok(link_status, lane_count)) { + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + + retval = analogix_dp_read_bytes_from_dpcd(dp, + DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request); + if (retval) + return retval; + + retval = analogix_dp_read_byte_from_dpcd(dp, + DP_LANE_ALIGN_STATUS_UPDATED, &link_align); + if (retval) + return retval; + + analogix_dp_get_adjust_training_lane(dp, adjust_request); + + if (!analogix_dp_channel_eq_ok(link_status, link_align, lane_count)) { + /* traing pattern Set to Normal */ + analogix_dp_training_pattern_dis(dp); + + dev_info(dp->dev, "Link Training success!\n"); + + analogix_dp_get_link_bandwidth(dp, ®); + dp->link_train.link_rate = reg; + dev_dbg(dp->dev, "final bandwidth = %.2x\n", + dp->link_train.link_rate); + + analogix_dp_get_lane_count(dp, ®); + dp->link_train.lane_count = reg; + dev_dbg(dp->dev, "final lane count = %.2x\n", + dp->link_train.lane_count); + + /* set enhanced mode if available */ + analogix_dp_set_enhanced_mode(dp); + dp->link_train.lt_state = FINISHED; + + return 0; + } + + /* not all locked */ + dp->link_train.eq_loop++; + + if (dp->link_train.eq_loop > MAX_EQ_LOOP) { + dev_err(dp->dev, "EQ Max loop\n"); + analogix_dp_reduce_link_rate(dp); + return -EIO; + } + + for (lane = 0; lane < lane_count; lane++) + analogix_dp_set_lane_link_training(dp, + dp->link_train.training_lane[lane], lane); + + retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET, + lane_count, dp->link_train.training_lane); + + return retval; +} + +static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, + u8 *bandwidth) +{ + u8 data; + + /* + * For DP rev.1.1, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps + * For DP rev.1.2, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps + */ + analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data); + *bandwidth = data; +} + +static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp, + u8 *lane_count) +{ + u8 data; + + /* + * For DP rev.1.1, Maximum number of Main Link lanes + * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes + */ + analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data); + *lane_count = DPCD_MAX_LANE_COUNT(data); +} + +static void analogix_dp_init_training(struct analogix_dp_device *dp, + enum link_lane_count_type max_lane, + int max_rate) +{ + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + analogix_dp_reset_macro(dp); + + /* Initialize by reading RX's DPCD */ + analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); + analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); + + if ((dp->link_train.link_rate != DP_LINK_BW_1_62) && + (dp->link_train.link_rate != DP_LINK_BW_2_7) && + (dp->link_train.link_rate != DP_LINK_BW_5_4)) { + dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n", + dp->link_train.link_rate); + dp->link_train.link_rate = DP_LINK_BW_1_62; + } + + if (dp->link_train.lane_count == 0) { + dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n", + dp->link_train.lane_count); + dp->link_train.lane_count = (u8)LANE_COUNT1; + } + + /* Setup TX lane count & rate */ + if (dp->link_train.lane_count > max_lane) + dp->link_train.lane_count = max_lane; + if (dp->link_train.link_rate > max_rate) + dp->link_train.link_rate = max_rate; + + /* All DP analog module power up */ + analogix_dp_set_analog_power_down(dp, POWER_ALL, 0); +} + +static int analogix_dp_sw_link_training(struct analogix_dp_device *dp) +{ + int retval = 0, training_finished = 0; + + dp->link_train.lt_state = START; + + /* Process here */ + while (!retval && !training_finished) { + switch (dp->link_train.lt_state) { + case START: + retval = analogix_dp_link_start(dp); + if (retval) + dev_err(dp->dev, "LT link start failed!\n"); + break; + case CLOCK_RECOVERY: + retval = analogix_dp_process_clock_recovery(dp); + if (retval) + dev_err(dp->dev, "LT CR failed!\n"); + break; + case EQUALIZER_TRAINING: + retval = analogix_dp_process_equalizer_training(dp); + if (retval) + dev_err(dp->dev, "LT EQ failed!\n"); + break; + case FINISHED: + training_finished = 1; + break; + case FAILED: + return -EREMOTEIO; + } + } + if (retval) + dev_err(dp->dev, "eDP link training failed (%d)\n", retval); + + return retval; +} + +static int analogix_dp_set_link_train(struct analogix_dp_device *dp, + u32 count, u32 bwtype) +{ + int i; + int retval; + + for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) { + analogix_dp_init_training(dp, count, bwtype); + retval = analogix_dp_sw_link_training(dp); + if (retval == 0) + break; + + usleep_range(100, 110); + } + + return retval; +} + +static int analogix_dp_config_video(struct analogix_dp_device *dp) +{ + int retval = 0; + int timeout_loop = 0; + int done_count = 0; + + analogix_dp_config_video_slave_mode(dp); + + analogix_dp_set_video_color_format(dp); + + if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + dev_err(dp->dev, "PLL is not locked yet.\n"); + return -EINVAL; + } + + for (;;) { + timeout_loop++; + if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0) + break; + if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) { + dev_err(dp->dev, "Timeout of video streamclk ok\n"); + return -ETIMEDOUT; + } + + usleep_range(1, 2); + } + + /* Set to use the register calculated M/N video */ + analogix_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0); + + /* For video bist, Video timing must be generated by register */ + analogix_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE); + + /* Disable video mute */ + analogix_dp_enable_video_mute(dp, 0); + + /* Configure video slave mode */ + analogix_dp_enable_video_master(dp, 0); + + timeout_loop = 0; + + for (;;) { + timeout_loop++; + if (analogix_dp_is_video_stream_on(dp) == 0) { + done_count++; + if (done_count > 10) + break; + } else if (done_count) { + done_count = 0; + } + if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) { + dev_err(dp->dev, "Timeout of video streamclk ok\n"); + return -ETIMEDOUT; + } + + usleep_range(1000, 1001); + } + + if (retval != 0) + dev_err(dp->dev, "Video stream is not detected!\n"); + + return retval; +} + +static void analogix_dp_enable_scramble(struct analogix_dp_device *dp, + bool enable) +{ + u8 data; + + if (enable) { + analogix_dp_enable_scrambling(dp); + + analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET, + &data); + analogix_dp_write_byte_to_dpcd(dp, + DP_TRAINING_PATTERN_SET, + (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE)); + } else { + analogix_dp_disable_scrambling(dp); + + analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET, + &data); + analogix_dp_write_byte_to_dpcd(dp, + DP_TRAINING_PATTERN_SET, + (u8)(data | DP_LINK_SCRAMBLING_DISABLE)); + } +} + +static irqreturn_t analogix_dp_hardirq(int irq, void *arg) +{ + struct analogix_dp_device *dp = arg; + irqreturn_t ret = IRQ_NONE; + enum dp_irq_type irq_type; + + irq_type = analogix_dp_get_irq_type(dp); + if (irq_type != DP_IRQ_TYPE_UNKNOWN) { + analogix_dp_mute_hpd_interrupt(dp); + ret = IRQ_WAKE_THREAD; + } + + return ret; +} + +static irqreturn_t analogix_dp_irq_thread(int irq, void *arg) +{ + struct analogix_dp_device *dp = arg; + enum dp_irq_type irq_type; + + irq_type = analogix_dp_get_irq_type(dp); + if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN || + irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) { + dev_dbg(dp->dev, "Detected cable status changed!\n"); + if (dp->drm_dev) + drm_helper_hpd_irq_event(dp->drm_dev); + } + + if (irq_type != DP_IRQ_TYPE_UNKNOWN) { + analogix_dp_clear_hotplug_interrupts(dp); + analogix_dp_unmute_hpd_interrupt(dp); + } + + return IRQ_HANDLED; +} + +static void analogix_dp_commit(struct analogix_dp_device *dp) +{ + int ret; + + /* Keep the panel disabled while we configure video */ + if (dp->plat_data->panel) { + if (drm_panel_disable(dp->plat_data->panel)) + DRM_ERROR("failed to disable the panel\n"); + } + + ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count, + dp->video_info.max_link_rate); + if (ret) { + dev_err(dp->dev, "unable to do link train\n"); + return; + } + + analogix_dp_enable_scramble(dp, 1); + analogix_dp_enable_rx_to_enhanced_mode(dp, 1); + analogix_dp_enable_enhanced_mode(dp, 1); + + analogix_dp_init_video(dp); + ret = analogix_dp_config_video(dp); + if (ret) + dev_err(dp->dev, "unable to config video\n"); + + /* Safe to enable the panel now */ + if (dp->plat_data->panel) { + if (drm_panel_enable(dp->plat_data->panel)) + DRM_ERROR("failed to enable the panel\n"); + } + + /* Enable video */ + analogix_dp_start_video(dp); +} + +int analogix_dp_get_modes(struct drm_connector *connector) +{ + struct analogix_dp_device *dp = to_dp(connector); + struct edid *edid = (struct edid *)dp->edid; + int num_modes = 0; + + if (analogix_dp_handle_edid(dp) == 0) { + drm_mode_connector_update_edid_property(&dp->connector, edid); + num_modes += drm_add_edid_modes(&dp->connector, edid); + } + + if (dp->plat_data->panel) + num_modes += drm_panel_get_modes(dp->plat_data->panel); + + if (dp->plat_data->get_modes) + num_modes += dp->plat_data->get_modes(dp->plat_data); + + return num_modes; +} + +static struct drm_encoder * +analogix_dp_best_encoder(struct drm_connector *connector) +{ + struct analogix_dp_device *dp = to_dp(connector); + + return dp->encoder; +} + +static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = { + .get_modes = analogix_dp_get_modes, + .best_encoder = analogix_dp_best_encoder, +}; + +enum drm_connector_status +analogix_dp_detect(struct drm_connector *connector, bool force) +{ + struct analogix_dp_device *dp = to_dp(connector); + + if (analogix_dp_detect_hpd(dp)) + return connector_status_disconnected; + + return connector_status_connected; +} + +static void analogix_dp_connector_destroy(struct drm_connector *connector) +{ + drm_connector_unregister(connector); + drm_connector_cleanup(connector); + +} + +static const struct drm_connector_funcs analogix_dp_connector_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = analogix_dp_detect, + .destroy = analogix_dp_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int analogix_dp_bridge_attach(struct drm_bridge *bridge) +{ + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_encoder *encoder = dp->encoder; + struct drm_connector *connector = &dp->connector; + int ret; + + if (!bridge->encoder) { + DRM_ERROR("Parent encoder object not found"); + return -ENODEV; + } + + connector->polled = DRM_CONNECTOR_POLL_HPD; + + ret = drm_connector_init(dp->drm_dev, connector, + &analogix_dp_connector_funcs, + DRM_MODE_CONNECTOR_eDP); + if (ret) { + DRM_ERROR("Failed to initialize connector with drm\n"); + return ret; + } + + drm_connector_helper_add(connector, + &analogix_dp_connector_helper_funcs); + drm_mode_connector_attach_encoder(connector, encoder); + + /* + * NOTE: the connector registration is implemented in analogix + * platform driver, that to say connector would be exist after + * plat_data->attch return, that's why we record the connector + * point after plat attached. + */ + if (dp->plat_data->attach) { + ret = dp->plat_data->attach(dp->plat_data, bridge, connector); + if (ret) { + DRM_ERROR("Failed at platform attch func\n"); + return ret; + } + } + + if (dp->plat_data->panel) { + ret = drm_panel_attach(dp->plat_data->panel, &dp->connector); + if (ret) { + DRM_ERROR("Failed to attach panel\n"); + return ret; + } + } + + return 0; +} + +static void analogix_dp_bridge_enable(struct drm_bridge *bridge) +{ + struct analogix_dp_device *dp = bridge->driver_private; + + if (dp->dpms_mode == DRM_MODE_DPMS_ON) + return; + + pm_runtime_get_sync(dp->dev); + + if (dp->plat_data->power_on) + dp->plat_data->power_on(dp->plat_data); + + phy_power_on(dp->phy); + analogix_dp_init_dp(dp); + enable_irq(dp->irq); + analogix_dp_commit(dp); + + dp->dpms_mode = DRM_MODE_DPMS_ON; +} + +static void analogix_dp_bridge_disable(struct drm_bridge *bridge) +{ + struct analogix_dp_device *dp = bridge->driver_private; + + if (dp->dpms_mode != DRM_MODE_DPMS_ON) + return; + + if (dp->plat_data->panel) { + if (drm_panel_disable(dp->plat_data->panel)) { + DRM_ERROR("failed to disable the panel\n"); + return; + } + } + + disable_irq(dp->irq); + phy_power_off(dp->phy); + + if (dp->plat_data->power_off) + dp->plat_data->power_off(dp->plat_data); + + pm_runtime_put_sync(dp->dev); + + dp->dpms_mode = DRM_MODE_DPMS_OFF; +} + +static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge, + struct drm_display_mode *orig_mode, + struct drm_display_mode *mode) +{ + struct analogix_dp_device *dp = bridge->driver_private; + struct drm_display_info *display_info = &dp->connector.display_info; + struct video_info *video = &dp->video_info; + struct device_node *dp_node = dp->dev->of_node; + int vic; + + /* Input video interlaces & hsync pol & vsync pol */ + video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC); + video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC); + + /* Input video dynamic_range & colorimetry */ + vic = drm_match_cea_mode(mode); + if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) || + (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) { + video->dynamic_range = CEA; + video->ycbcr_coeff = COLOR_YCBCR601; + } else if (vic) { + video->dynamic_range = CEA; + video->ycbcr_coeff = COLOR_YCBCR709; + } else { + video->dynamic_range = VESA; + video->ycbcr_coeff = COLOR_YCBCR709; + } + + /* Input vide bpc and color_formats */ + switch (display_info->bpc) { + case 12: + video->color_depth = COLOR_12; + break; + case 10: + video->color_depth = COLOR_10; + break; + case 8: + video->color_depth = COLOR_8; + break; + case 6: + video->color_depth = COLOR_6; + break; + default: + video->color_depth = COLOR_8; + break; + } + if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444) + video->color_space = COLOR_YCBCR444; + else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422) + video->color_space = COLOR_YCBCR422; + else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444) + video->color_space = COLOR_RGB; + else + video->color_space = COLOR_RGB; + + /* + * NOTE: those property parsing code is used for providing backward + * compatibility for samsung platform. + * Due to we used the "of_property_read_u32" interfaces, when this + * property isn't present, the "video_info" can keep the original + * values and wouldn't be modified. + */ + of_property_read_u32(dp_node, "samsung,color-space", + &video->color_space); + of_property_read_u32(dp_node, "samsung,dynamic-range", + &video->dynamic_range); + of_property_read_u32(dp_node, "samsung,ycbcr-coeff", + &video->ycbcr_coeff); + of_property_read_u32(dp_node, "samsung,color-depth", + &video->color_depth); + if (of_property_read_bool(dp_node, "hsync-active-high")) + video->h_sync_polarity = true; + if (of_property_read_bool(dp_node, "vsync-active-high")) + video->v_sync_polarity = true; + if (of_property_read_bool(dp_node, "interlaced")) + video->interlaced = true; +} + +static void analogix_dp_bridge_nop(struct drm_bridge *bridge) +{ + /* do nothing */ +} + +static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { + .enable = analogix_dp_bridge_enable, + .disable = analogix_dp_bridge_disable, + .pre_enable = analogix_dp_bridge_nop, + .post_disable = analogix_dp_bridge_nop, + .mode_set = analogix_dp_bridge_mode_set, + .attach = analogix_dp_bridge_attach, +}; + +static int analogix_dp_create_bridge(struct drm_device *drm_dev, + struct analogix_dp_device *dp) +{ + struct drm_bridge *bridge; + int ret; + + bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL); + if (!bridge) { + DRM_ERROR("failed to allocate for drm bridge\n"); + return -ENOMEM; + } + + dp->bridge = bridge; + + dp->encoder->bridge = bridge; + bridge->driver_private = dp; + bridge->encoder = dp->encoder; + bridge->funcs = &analogix_dp_bridge_funcs; + + ret = drm_bridge_attach(drm_dev, bridge); + if (ret) { + DRM_ERROR("failed to attach drm bridge\n"); + return -EINVAL; + } + + return 0; +} + +static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp) +{ + struct device_node *dp_node = dp->dev->of_node; + struct video_info *video_info = &dp->video_info; + + switch (dp->plat_data->dev_type) { + case RK3288_DP: + /* + * Like Rk3288 DisplayPort TRM indicate that "Main link + * containing 4 physical lanes of 2.7/1.62 Gbps/lane". + */ + video_info->max_link_rate = 0x0A; + video_info->max_lane_count = 0x04; + break; + case EXYNOS_DP: + /* + * NOTE: those property parseing code is used for + * providing backward compatibility for samsung platform. + */ + of_property_read_u32(dp_node, "samsung,link-rate", + &video_info->max_link_rate); + of_property_read_u32(dp_node, "samsung,lane-count", + &video_info->max_lane_count); + break; + } + + return 0; +} + +int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, + struct analogix_dp_plat_data *plat_data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct analogix_dp_device *dp; + struct resource *res; + unsigned int irq_flags; + int ret; + + if (!plat_data) { + dev_err(dev, "Invalided input plat_data\n"); + return -EINVAL; + } + + dp = devm_kzalloc(dev, sizeof(struct analogix_dp_device), GFP_KERNEL); + if (!dp) + return -ENOMEM; + + dev_set_drvdata(dev, dp); + + dp->dev = &pdev->dev; + dp->dpms_mode = DRM_MODE_DPMS_OFF; + + /* + * platform dp driver need containor_of the plat_data to get + * the driver private data, so we need to store the point of + * plat_data, not the context of plat_data. + */ + dp->plat_data = plat_data; + + ret = analogix_dp_dt_parse_pdata(dp); + if (ret) + return ret; + + dp->phy = devm_phy_get(dp->dev, "dp"); + if (IS_ERR(dp->phy)) { + dev_err(dp->dev, "no DP phy configured\n"); + ret = PTR_ERR(dp->phy); + if (ret) { + /* + * phy itself is not enabled, so we can move forward + * assigning NULL to phy pointer. + */ + if (ret == -ENOSYS || ret == -ENODEV) + dp->phy = NULL; + else + return ret; + } + } + + dp->clock = devm_clk_get(&pdev->dev, "dp"); + if (IS_ERR(dp->clock)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(dp->clock); + } + + clk_prepare_enable(dp->clock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + dp->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dp->reg_base)) + return PTR_ERR(dp->reg_base); + + dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd"); + + dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0); + if (!gpio_is_valid(dp->hpd_gpio)) + dp->hpd_gpio = of_get_named_gpio(dev->of_node, + "samsung,hpd-gpio", 0); + + if (gpio_is_valid(dp->hpd_gpio)) { + /* + * Set up the hotplug GPIO from the device tree as an interrupt. + * Simply specifying a different interrupt in the device tree + * doesn't work since we handle hotplug rather differently when + * using a GPIO. We also need the actual GPIO specifier so + * that we can get the current state of the GPIO. + */ + ret = devm_gpio_request_one(&pdev->dev, dp->hpd_gpio, GPIOF_IN, + "hpd_gpio"); + if (ret) { + dev_err(&pdev->dev, "failed to get hpd gpio\n"); + return ret; + } + dp->irq = gpio_to_irq(dp->hpd_gpio); + irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + } else { + dp->hpd_gpio = -ENODEV; + dp->irq = platform_get_irq(pdev, 0); + irq_flags = 0; + } + + if (dp->irq == -ENXIO) { + dev_err(&pdev->dev, "failed to get irq\n"); + return -ENODEV; + } + + pm_runtime_enable(dev); + + phy_power_on(dp->phy); + + if (dp->plat_data->panel) { + if (drm_panel_prepare(dp->plat_data->panel)) { + DRM_ERROR("failed to setup the panel\n"); + return -EBUSY; + } + } + + analogix_dp_init_dp(dp); + + ret = devm_request_threaded_irq(&pdev->dev, dp->irq, + analogix_dp_hardirq, + analogix_dp_irq_thread, + irq_flags, "analogix-dp", dp); + if (ret) { + dev_err(&pdev->dev, "failed to request irq\n"); + goto err_disable_pm_runtime; + } + disable_irq(dp->irq); + + dp->drm_dev = drm_dev; + dp->encoder = dp->plat_data->encoder; + + ret = analogix_dp_create_bridge(drm_dev, dp); + if (ret) { + DRM_ERROR("failed to create bridge (%d)\n", ret); + drm_encoder_cleanup(dp->encoder); + goto err_disable_pm_runtime; + } + + return 0; + +err_disable_pm_runtime: + pm_runtime_disable(dev); + + return ret; +} +EXPORT_SYMBOL_GPL(analogix_dp_bind); + +void analogix_dp_unbind(struct device *dev, struct device *master, + void *data) +{ + struct analogix_dp_device *dp = dev_get_drvdata(dev); + + analogix_dp_bridge_disable(dp->bridge); + + if (dp->plat_data->panel) { + if (drm_panel_unprepare(dp->plat_data->panel)) + DRM_ERROR("failed to turnoff the panel\n"); + } + + pm_runtime_disable(dev); +} +EXPORT_SYMBOL_GPL(analogix_dp_unbind); + +#ifdef CONFIG_PM +int analogix_dp_suspend(struct device *dev) +{ + struct analogix_dp_device *dp = dev_get_drvdata(dev); + + clk_disable_unprepare(dp->clock); + + if (dp->plat_data->panel) { + if (drm_panel_unprepare(dp->plat_data->panel)) + DRM_ERROR("failed to turnoff the panel\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(analogix_dp_suspend); + +int analogix_dp_resume(struct device *dev) +{ + struct analogix_dp_device *dp = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(dp->clock); + if (ret < 0) { + DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret); + return ret; + } + + if (dp->plat_data->panel) { + if (drm_panel_prepare(dp->plat_data->panel)) { + DRM_ERROR("failed to setup the panel\n"); + return -EBUSY; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(analogix_dp_resume); +#endif + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("Analogix DP Core Driver"); +MODULE_LICENSE("GPL v2"); |