1 files changed, 253 insertions, 39 deletions

diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index 7bd0affa057a..3aaa90913bf8 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -9,25 +9,58 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of_graph.h>
+#include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
 #include <drm/drm_bridge.h>
+#include <drm/drm_dp_helper.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 
+#define PAGE0_AUXCH_CFG3	0x76
+#define  AUXCH_CFG3_RESET	0xff
+#define PAGE0_SWAUX_ADDR_7_0	0x7d
+#define PAGE0_SWAUX_ADDR_15_8	0x7e
+#define PAGE0_SWAUX_ADDR_23_16	0x7f
+#define  SWAUX_ADDR_MASK	GENMASK(19, 0)
+#define PAGE0_SWAUX_LENGTH	0x80
+#define  SWAUX_LENGTH_MASK	GENMASK(3, 0)
+#define  SWAUX_NO_PAYLOAD	BIT(7)
+#define PAGE0_SWAUX_WDATA	0x81
+#define PAGE0_SWAUX_RDATA	0x82
+#define PAGE0_SWAUX_CTRL	0x83
+#define  SWAUX_SEND		BIT(0)
+#define PAGE0_SWAUX_STATUS	0x84
+#define  SWAUX_M_MASK		GENMASK(4, 0)
+#define  SWAUX_STATUS_MASK	GENMASK(7, 5)
+#define  SWAUX_STATUS_NACK	(0x1 << 5)
+#define  SWAUX_STATUS_DEFER	(0x2 << 5)
+#define  SWAUX_STATUS_ACKM	(0x3 << 5)
+#define  SWAUX_STATUS_INVALID	(0x4 << 5)
+#define  SWAUX_STATUS_I2C_NACK	(0x5 << 5)
+#define  SWAUX_STATUS_I2C_DEFER	(0x6 << 5)
+#define  SWAUX_STATUS_TIMEOUT	(0x7 << 5)
+
 #define PAGE2_GPIO_H		0xa7
-#define PS_GPIO9		BIT(1)
+#define  PS_GPIO9		BIT(1)
 #define PAGE2_I2C_BYPASS	0xea
-#define I2C_BYPASS_EN		0xd0
+#define  I2C_BYPASS_EN		0xd0
 #define PAGE2_MCS_EN		0xf3
-#define MCS_EN			BIT(0)
+#define  MCS_EN			BIT(0)
+
 #define PAGE3_SET_ADD		0xfe
-#define VDO_CTL_ADD		0x13
-#define VDO_DIS			0x18
-#define VDO_EN			0x1c
-#define DP_NUM_LANES		4
+#define  VDO_CTL_ADD		0x13
+#define  VDO_DIS		0x18
+#define  VDO_EN			0x1c
+
+#define NUM_MIPI_LANES		4
+
+#define COMMON_PS8640_REGMAP_CONFIG \
+	.reg_bits = 8, \
+	.val_bits = 8, \
+	.cache_type = REGCACHE_NONE
 
 /*
  * PS8640 uses multiple addresses:
@@ -60,29 +93,197 @@ enum ps8640_vdo_control {
 struct ps8640 {
 	struct drm_bridge bridge;
 	struct drm_bridge *panel_bridge;
+	struct drm_dp_aux aux;
 	struct mipi_dsi_device *dsi;
 	struct i2c_client *page[MAX_DEVS];
+	struct regmap	*regmap[MAX_DEVS];
 	struct regulator_bulk_data supplies[2];
 	struct gpio_desc *gpio_reset;
 	struct gpio_desc *gpio_powerdown;
 	bool powered;
 };
 
+static const struct regmap_config ps8640_regmap_config[] = {
+	[PAGE0_DP_CNTL] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xbf,
+	},
+	[PAGE1_VDO_BDG] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xff,
+	},
+	[PAGE2_TOP_CNTL] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xff,
+	},
+	[PAGE3_DSI_CNTL1] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xff,
+	},
+	[PAGE4_MIPI_PHY] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xff,
+	},
+	[PAGE5_VPLL] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0x7f,
+	},
+	[PAGE6_DSI_CNTL2] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xff,
+	},
+	[PAGE7_SPI_CNTL] = {
+		COMMON_PS8640_REGMAP_CONFIG,
+		.max_register = 0xff,
+	},
+};
+
 static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
 {
 	return container_of(e, struct ps8640, bridge);
 }
 
+static inline struct ps8640 *aux_to_ps8640(struct drm_dp_aux *aux)
+{
+	return container_of(aux, struct ps8640, aux);
+}
+
+static ssize_t ps8640_aux_transfer(struct drm_dp_aux *aux,
+				   struct drm_dp_aux_msg *msg)
+{
+	struct ps8640 *ps_bridge = aux_to_ps8640(aux);
+	struct regmap *map = ps_bridge->regmap[PAGE0_DP_CNTL];
+	struct device *dev = &ps_bridge->page[PAGE0_DP_CNTL]->dev;
+	unsigned int len = msg->size;
+	unsigned int data;
+	unsigned int base;
+	int ret;
+	u8 request = msg->request &
+		     ~(DP_AUX_I2C_MOT | DP_AUX_I2C_WRITE_STATUS_UPDATE);
+	u8 *buf = msg->buffer;
+	u8 addr_len[PAGE0_SWAUX_LENGTH + 1 - PAGE0_SWAUX_ADDR_7_0];
+	u8 i;
+	bool is_native_aux = false;
+
+	if (len > DP_AUX_MAX_PAYLOAD_BYTES)
+		return -EINVAL;
+
+	if (msg->address & ~SWAUX_ADDR_MASK)
+		return -EINVAL;
+
+	switch (request) {
+	case DP_AUX_NATIVE_WRITE:
+	case DP_AUX_NATIVE_READ:
+		is_native_aux = true;
+		fallthrough;
+	case DP_AUX_I2C_WRITE:
+	case DP_AUX_I2C_READ:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(map, PAGE0_AUXCH_CFG3, AUXCH_CFG3_RESET);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to write PAGE0_AUXCH_CFG3: %d\n",
+			      ret);
+		return ret;
+	}
+
+	/* Assume it's good */
+	msg->reply = 0;
+
+	base = PAGE0_SWAUX_ADDR_7_0;
+	addr_len[PAGE0_SWAUX_ADDR_7_0 - base] = msg->address;
+	addr_len[PAGE0_SWAUX_ADDR_15_8 - base] = msg->address >> 8;
+	addr_len[PAGE0_SWAUX_ADDR_23_16 - base] = (msg->address >> 16) |
+						  (msg->request << 4);
+	addr_len[PAGE0_SWAUX_LENGTH - base] = (len == 0) ? SWAUX_NO_PAYLOAD :
+					      ((len - 1) & SWAUX_LENGTH_MASK);
+
+	regmap_bulk_write(map, PAGE0_SWAUX_ADDR_7_0, addr_len,
+			  ARRAY_SIZE(addr_len));
+
+	if (len && (request == DP_AUX_NATIVE_WRITE ||
+		    request == DP_AUX_I2C_WRITE)) {
+		/* Write to the internal FIFO buffer */
+		for (i = 0; i < len; i++) {
+			ret = regmap_write(map, PAGE0_SWAUX_WDATA, buf[i]);
+			if (ret) {
+				DRM_DEV_ERROR(dev,
+					      "failed to write WDATA: %d\n",
+					      ret);
+				return ret;
+			}
+		}
+	}
+
+	regmap_write(map, PAGE0_SWAUX_CTRL, SWAUX_SEND);
+
+	/* Zero delay loop because i2c transactions are slow already */
+	regmap_read_poll_timeout(map, PAGE0_SWAUX_CTRL, data,
+				 !(data & SWAUX_SEND), 0, 50 * 1000);
+
+	regmap_read(map, PAGE0_SWAUX_STATUS, &data);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to read PAGE0_SWAUX_STATUS: %d\n",
+			      ret);
+		return ret;
+	}
+
+	switch (data & SWAUX_STATUS_MASK) {
+	/* Ignore the DEFER cases as they are already handled in hardware */
+	case SWAUX_STATUS_NACK:
+	case SWAUX_STATUS_I2C_NACK:
+		/*
+		 * The programming guide is not clear about whether a I2C NACK
+		 * would trigger SWAUX_STATUS_NACK or SWAUX_STATUS_I2C_NACK. So
+		 * we handle both cases together.
+		 */
+		if (is_native_aux)
+			msg->reply |= DP_AUX_NATIVE_REPLY_NACK;
+		else
+			msg->reply |= DP_AUX_I2C_REPLY_NACK;
+
+		fallthrough;
+	case SWAUX_STATUS_ACKM:
+		len = data & SWAUX_M_MASK;
+		break;
+	case SWAUX_STATUS_INVALID:
+		return -EOPNOTSUPP;
+	case SWAUX_STATUS_TIMEOUT:
+		return -ETIMEDOUT;
+	}
+
+	if (len && (request == DP_AUX_NATIVE_READ ||
+		    request == DP_AUX_I2C_READ)) {
+		/* Read from the internal FIFO buffer */
+		for (i = 0; i < len; i++) {
+			ret = regmap_read(map, PAGE0_SWAUX_RDATA, &data);
+			if (ret) {
+				DRM_DEV_ERROR(dev,
+					      "failed to read RDATA: %d\n",
+					      ret);
+				return ret;
+			}
+
+			buf[i] = data;
+		}
+	}
+
+	return len;
+}
+
 static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
 				     const enum ps8640_vdo_control ctrl)
 {
-	struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
+	struct regmap *map = ps_bridge->regmap[PAGE3_DSI_CNTL1];
 	u8 vdo_ctrl_buf[] = { VDO_CTL_ADD, ctrl };
 	int ret;
 
-	ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD,
-					     sizeof(vdo_ctrl_buf),
-					     vdo_ctrl_buf);
+	ret = regmap_bulk_write(map, PAGE3_SET_ADD,
+				vdo_ctrl_buf, sizeof(vdo_ctrl_buf));
+
 	if (ret < 0) {
 		DRM_ERROR("failed to %sable VDO: %d\n",
 			  ctrl == ENABLE ? "en" : "dis", ret);
@@ -94,8 +295,7 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
 
 static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
 {
-	struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
-	unsigned long timeout;
+	struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL];
 	int ret, status;
 
 	if (ps_bridge->powered)
@@ -119,18 +319,12 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
 	 */
 	msleep(200);
 
-	timeout = jiffies + msecs_to_jiffies(200) + 1;
-
-	while (time_is_after_jiffies(timeout)) {
-		status = i2c_smbus_read_byte_data(client, PAGE2_GPIO_H);
-		if (status < 0) {
-			DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", status);
-			goto err_regulators_disable;
-		}
-		if ((status & PS_GPIO9) == PS_GPIO9)
-			break;
+	ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status,
+				       status & PS_GPIO9, 20 * 1000, 200 * 1000);
 
-		msleep(20);
+	if (ret < 0) {
+		DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", ret);
+		goto err_regulators_disable;
 	}
 
 	msleep(50);
@@ -142,22 +336,15 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
 	 * disabled by the manufacturer. Once disabled, all MCS commands are
 	 * ignored by the display interface.
 	 */
-	status = i2c_smbus_read_byte_data(client, PAGE2_MCS_EN);
-	if (status < 0) {
-		DRM_ERROR("failed read PAGE2_MCS_EN: %d\n", status);
-		goto err_regulators_disable;
-	}
 
-	ret = i2c_smbus_write_byte_data(client, PAGE2_MCS_EN,
-					status & ~MCS_EN);
+	ret = regmap_update_bits(map, PAGE2_MCS_EN, MCS_EN, 0);
 	if (ret < 0) {
 		DRM_ERROR("failed write PAGE2_MCS_EN: %d\n", ret);
 		goto err_regulators_disable;
 	}
 
 	/* Switch access edp panel's edid through i2c */
-	ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
-					I2C_BYPASS_EN);
+	ret = regmap_write(map, PAGE2_I2C_BYPASS, I2C_BYPASS_EN);
 	if (ret < 0) {
 		DRM_ERROR("failed write PAGE2_I2C_BYPASS: %d\n", ret);
 		goto err_regulators_disable;
@@ -254,20 +441,35 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge,
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
 			  MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
 	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->lanes = DP_NUM_LANES;
+	dsi->lanes = NUM_MIPI_LANES;
 	ret = mipi_dsi_attach(dsi);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "failed to attach dsi device: %d\n", ret);
 		goto err_dsi_attach;
+	}
+
+	ret = drm_dp_aux_register(&ps_bridge->aux);
+	if (ret) {
+		dev_err(dev, "failed to register DP AUX channel: %d\n", ret);
+		goto err_aux_register;
+	}
 
 	/* Attach the panel-bridge to the dsi bridge */
 	return drm_bridge_attach(bridge->encoder, ps_bridge->panel_bridge,
 				 &ps_bridge->bridge, flags);
 
+err_aux_register:
+	mipi_dsi_detach(dsi);
 err_dsi_attach:
 	mipi_dsi_device_unregister(dsi);
 	return ret;
 }
 
+static void ps8640_bridge_detach(struct drm_bridge *bridge)
+{
+	drm_dp_aux_unregister(&bridge_to_ps8640(bridge)->aux);
+}
+
 static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
 					   struct drm_connector *connector)
 {
@@ -304,6 +506,7 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs ps8640_bridge_funcs = {
 	.attach = ps8640_bridge_attach,
+	.detach = ps8640_bridge_detach,
 	.get_edid = ps8640_bridge_get_edid,
 	.post_disable = ps8640_post_disable,
 	.pre_enable = ps8640_pre_enable,
@@ -360,19 +563,30 @@ static int ps8640_probe(struct i2c_client *client)
 
 	ps_bridge->page[PAGE0_DP_CNTL] = client;
 
+	ps_bridge->regmap[PAGE0_DP_CNTL] = devm_regmap_init_i2c(client, ps8640_regmap_config);
+	if (IS_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]))
+		return PTR_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]);
+
 	for (i = 1; i < ARRAY_SIZE(ps_bridge->page); i++) {
 		ps_bridge->page[i] = devm_i2c_new_dummy_device(&client->dev,
 							     client->adapter,
 							     client->addr + i);
-		if (IS_ERR(ps_bridge->page[i])) {
-			dev_err(dev, "failed i2c dummy device, address %02x\n",
-				client->addr + i);
+		if (IS_ERR(ps_bridge->page[i]))
 			return PTR_ERR(ps_bridge->page[i]);
-		}
+
+		ps_bridge->regmap[i] = devm_regmap_init_i2c(ps_bridge->page[i],
+							    ps8640_regmap_config + i);
+		if (IS_ERR(ps_bridge->regmap[i]))
+			return PTR_ERR(ps_bridge->regmap[i]);
 	}
 
 	i2c_set_clientdata(client, ps_bridge);
 
+	ps_bridge->aux.name = "parade-ps8640-aux";
+	ps_bridge->aux.dev = dev;
+	ps_bridge->aux.transfer = ps8640_aux_transfer;
+	drm_dp_aux_init(&ps_bridge->aux);
+
 	drm_bridge_add(&ps_bridge->bridge);
 
 	return 0;