diff options
Diffstat (limited to 'drivers/gpu/drm/bridge')
22 files changed, 1963 insertions, 1050 deletions
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 34362976cd6f..0b9ca5862455 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -16,16 +16,6 @@ config DRM_PANEL_BRIDGE menu "Display Interface Bridges" depends on DRM && DRM_BRIDGE -config DRM_ANALOGIX_ANX78XX - tristate "Analogix ANX78XX bridge" - select DRM_KMS_HELPER - select REGMAP_I2C - ---help--- - ANX78XX is an ultra-low power Full-HD SlimPort transmitter - designed for portable devices. The ANX78XX transforms - the HDMI output of an application processor to MyDP - or DisplayPort. - config DRM_CDNS_DSI tristate "Cadence DPI/DSI bridge" select DRM_KMS_HELPER @@ -45,14 +35,14 @@ config DRM_DUMB_VGA_DAC Support for non-programmable RGB to VGA DAC bridges, such as ADI ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. -config DRM_LVDS_ENCODER - tristate "Transparent parallel to LVDS encoder support" +config DRM_LVDS_CODEC + tristate "Transparent LVDS encoders and decoders support" depends on OF select DRM_KMS_HELPER select DRM_PANEL_BRIDGE help - Support for transparent parallel to LVDS encoders that don't require - any configuration. + Support for transparent LVDS encoders and decoders that don't + require any configuration. config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" @@ -60,10 +50,10 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW select DRM_KMS_HELPER select DRM_PANEL ---help--- - This is a driver for the display bridges of - GE B850v3 that convert dual channel LVDS - to DP++. This is used with the i.MX6 imx-ldb - driver. You are likely to say N here. + This is a driver for the display bridges of + GE B850v3 that convert dual channel LVDS + to DP++. This is used with the i.MX6 imx-ldb + driver. You are likely to say N here. config DRM_NXP_PTN3460 tristate "NXP PTN3460 DP/LVDS bridge" diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 4934fcf5a6f8..cd16ce830270 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -1,8 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o @@ -12,8 +11,9 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o -obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o + +obj-y += analogix/ obj-y += synopsys/ diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h deleted file mode 100644 index 55d6c2109740..000000000000 --- a/drivers/gpu/drm/bridge/analogix-anx78xx.h +++ /dev/null @@ -1,703 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. - */ - -#ifndef __ANX78xx_H -#define __ANX78xx_H - -/***************************************************************/ -/* Register definitions for RX_PO */ -/***************************************************************/ - -/* - * System Control and Status - */ - -/* Software Reset Register 1 */ -#define SP_SOFTWARE_RESET1_REG 0x11 -#define SP_VIDEO_RST BIT(4) -#define SP_HDCP_MAN_RST BIT(2) -#define SP_TMDS_RST BIT(1) -#define SP_SW_MAN_RST BIT(0) - -/* System Status Register */ -#define SP_SYSTEM_STATUS_REG 0x14 -#define SP_TMDS_CLOCK_DET BIT(1) -#define SP_TMDS_DE_DET BIT(0) - -/* HDMI Status Register */ -#define SP_HDMI_STATUS_REG 0x15 -#define SP_HDMI_AUD_LAYOUT BIT(3) -#define SP_HDMI_DET BIT(0) -# define SP_DVI_MODE 0 -# define SP_HDMI_MODE 1 - -/* HDMI Mute Control Register */ -#define SP_HDMI_MUTE_CTRL_REG 0x16 -#define SP_AUD_MUTE BIT(1) -#define SP_VID_MUTE BIT(0) - -/* System Power Down Register 1 */ -#define SP_SYSTEM_POWER_DOWN1_REG 0x18 -#define SP_PWDN_CTRL BIT(0) - -/* - * Audio and Video Auto Control - */ - -/* Auto Audio and Video Control register */ -#define SP_AUDVID_CTRL_REG 0x20 -#define SP_AVC_OE BIT(7) -#define SP_AAC_OE BIT(6) -#define SP_AVC_EN BIT(1) -#define SP_AAC_EN BIT(0) - -/* Audio Exception Enable Registers */ -#define SP_AUD_EXCEPTION_ENABLE_BASE (0x24 - 1) -/* Bits for Audio Exception Enable Register 3 */ -#define SP_AEC_EN21 BIT(5) - -/* - * Interrupt - */ - -/* Interrupt Status Register 1 */ -#define SP_INT_STATUS1_REG 0x31 -/* Bits for Interrupt Status Register 1 */ -#define SP_HDMI_DVI BIT(7) -#define SP_CKDT_CHG BIT(6) -#define SP_SCDT_CHG BIT(5) -#define SP_PCLK_CHG BIT(4) -#define SP_PLL_UNLOCK BIT(3) -#define SP_CABLE_PLUG_CHG BIT(2) -#define SP_SET_MUTE BIT(1) -#define SP_SW_INTR BIT(0) -/* Bits for Interrupt Status Register 2 */ -#define SP_HDCP_ERR BIT(5) -#define SP_AUDIO_SAMPLE_CHG BIT(0) /* undocumented */ -/* Bits for Interrupt Status Register 3 */ -#define SP_AUD_MODE_CHG BIT(0) -/* Bits for Interrupt Status Register 5 */ -#define SP_AUDIO_RCV BIT(0) -/* Bits for Interrupt Status Register 6 */ -#define SP_INT_STATUS6_REG 0x36 -#define SP_CTS_RCV BIT(7) -#define SP_NEW_AUD_PKT BIT(4) -#define SP_NEW_AVI_PKT BIT(1) -#define SP_NEW_CP_PKT BIT(0) -/* Bits for Interrupt Status Register 7 */ -#define SP_NO_VSI BIT(7) -#define SP_NEW_VS BIT(4) - -/* Interrupt Mask 1 Status Registers */ -#define SP_INT_MASK1_REG 0x41 - -/* HDMI US TIMER Control Register */ -#define SP_HDMI_US_TIMER_CTRL_REG 0x49 -#define SP_MS_TIMER_MARGIN_10_8_MASK 0x07 - -/* - * TMDS Control - */ - -/* TMDS Control Registers */ -#define SP_TMDS_CTRL_BASE (0x50 - 1) -/* Bits for TMDS Control Register 7 */ -#define SP_PD_RT BIT(0) - -/* - * Video Control - */ - -/* Video Status Register */ -#define SP_VIDEO_STATUS_REG 0x70 -#define SP_COLOR_DEPTH_MASK 0xf0 -#define SP_COLOR_DEPTH_SHIFT 4 -# define SP_COLOR_DEPTH_MODE_LEGACY 0x00 -# define SP_COLOR_DEPTH_MODE_24BIT 0x04 -# define SP_COLOR_DEPTH_MODE_30BIT 0x05 -# define SP_COLOR_DEPTH_MODE_36BIT 0x06 -# define SP_COLOR_DEPTH_MODE_48BIT 0x07 - -/* Video Data Range Control Register */ -#define SP_VID_DATA_RANGE_CTRL_REG 0x83 -#define SP_R2Y_INPUT_LIMIT BIT(1) - -/* Pixel Clock High Resolution Counter Registers */ -#define SP_PCLK_HIGHRES_CNT_BASE (0x8c - 1) - -/* - * Audio Control - */ - -/* Number of Audio Channels Status Registers */ -#define SP_AUD_CH_STATUS_REG_NUM 6 - -/* Audio IN S/PDIF Channel Status Registers */ -#define SP_AUD_SPDIF_CH_STATUS_BASE 0xc7 - -/* Audio IN S/PDIF Channel Status Register 4 */ -#define SP_FS_FREQ_MASK 0x0f -# define SP_FS_FREQ_44100HZ 0x00 -# define SP_FS_FREQ_48000HZ 0x02 -# define SP_FS_FREQ_32000HZ 0x03 -# define SP_FS_FREQ_88200HZ 0x08 -# define SP_FS_FREQ_96000HZ 0x0a -# define SP_FS_FREQ_176400HZ 0x0c -# define SP_FS_FREQ_192000HZ 0x0e - -/* - * Micellaneous Control Block - */ - -/* CHIP Control Register */ -#define SP_CHIP_CTRL_REG 0xe3 -#define SP_MAN_HDMI5V_DET BIT(3) -#define SP_PLLLOCK_CKDT_EN BIT(2) -#define SP_ANALOG_CKDT_EN BIT(1) -#define SP_DIGITAL_CKDT_EN BIT(0) - -/* Packet Receiving Status Register */ -#define SP_PACKET_RECEIVING_STATUS_REG 0xf3 -#define SP_AVI_RCVD BIT(5) -#define SP_VSI_RCVD BIT(1) - -/***************************************************************/ -/* Register definitions for RX_P1 */ -/***************************************************************/ - -/* HDCP BCAPS Shadow Register */ -#define SP_HDCP_BCAPS_SHADOW_REG 0x2a -#define SP_BCAPS_REPEATER BIT(5) - -/* HDCP Status Register */ -#define SP_RX_HDCP_STATUS_REG 0x3f -#define SP_AUTH_EN BIT(4) - -/* - * InfoFrame and Control Packet Registers - */ - -/* AVI InfoFrame packet checksum */ -#define SP_AVI_INFOFRAME_CHECKSUM 0xa3 - -/* AVI InfoFrame Registers */ -#define SP_AVI_INFOFRAME_DATA_BASE 0xa4 - -#define SP_AVI_COLOR_F_MASK 0x60 -#define SP_AVI_COLOR_F_SHIFT 5 - -/* Audio InfoFrame Registers */ -#define SP_AUD_INFOFRAME_DATA_BASE 0xc4 -#define SP_AUD_INFOFRAME_LAYOUT_MASK 0x0f - -/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */ -#define SP_MPEG_VS_INFOFRAME_TYPE_REG 0xe0 - -/* MPEG/HDMI Vendor Specific InfoFrame Packet length */ -#define SP_MPEG_VS_INFOFRAME_LEN_REG 0xe2 - -/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */ -#define SP_MPEG_VS_INFOFRAME_VER_REG 0xe1 - -/* MPEG/HDMI Vendor Specific InfoFrame Packet content */ -#define SP_MPEG_VS_INFOFRAME_DATA_BASE 0xe4 - -/* General Control Packet Register */ -#define SP_GENERAL_CTRL_PACKET_REG 0x9f -#define SP_CLEAR_AVMUTE BIT(4) -#define SP_SET_AVMUTE BIT(0) - -/***************************************************************/ -/* Register definitions for TX_P0 */ -/***************************************************************/ - -/* HDCP Status Register */ -#define SP_TX_HDCP_STATUS_REG 0x00 -#define SP_AUTH_FAIL BIT(5) -#define SP_AUTHEN_PASS BIT(1) - -/* HDCP Control Register 0 */ -#define SP_HDCP_CTRL0_REG 0x01 -#define SP_RX_REPEATER BIT(6) -#define SP_RE_AUTH BIT(5) -#define SP_SW_AUTH_OK BIT(4) -#define SP_HARD_AUTH_EN BIT(3) -#define SP_HDCP_ENC_EN BIT(2) -#define SP_BKSV_SRM_PASS BIT(1) -#define SP_KSVLIST_VLD BIT(0) -/* HDCP Function Enabled */ -#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3)) - -/* HDCP Receiver BSTATUS Register 0 */ -#define SP_HDCP_RX_BSTATUS0_REG 0x1b -/* HDCP Receiver BSTATUS Register 1 */ -#define SP_HDCP_RX_BSTATUS1_REG 0x1c - -/* HDCP Embedded "Blue Screen" Content Registers */ -#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c -#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d -#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e - -/* HDCP Wait R0 Timing Register */ -#define SP_HDCP_WAIT_R0_TIME_REG 0x40 - -/* HDCP Link Integrity Check Timer Register */ -#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41 - -/* HDCP Repeater Ready Wait Timer Register */ -#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42 - -/* HDCP Auto Timer Register */ -#define SP_HDCP_AUTO_TIMER_REG 0x51 - -/* HDCP Key Status Register */ -#define SP_HDCP_KEY_STATUS_REG 0x5e - -/* HDCP Key Command Register */ -#define SP_HDCP_KEY_COMMAND_REG 0x5f -#define SP_DISABLE_SYNC_HDCP BIT(2) - -/* OTP Memory Key Protection Registers */ -#define SP_OTP_KEY_PROTECT1_REG 0x60 -#define SP_OTP_KEY_PROTECT2_REG 0x61 -#define SP_OTP_KEY_PROTECT3_REG 0x62 -#define SP_OTP_PSW1 0xa2 -#define SP_OTP_PSW2 0x7e -#define SP_OTP_PSW3 0xc6 - -/* DP System Control Registers */ -#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1) -/* Bits for DP System Control Register 2 */ -#define SP_CHA_STA BIT(2) -/* Bits for DP System Control Register 3 */ -#define SP_HPD_STATUS BIT(6) -#define SP_STRM_VALID BIT(2) -/* Bits for DP System Control Register 4 */ -#define SP_ENHANCED_MODE BIT(3) - -/* DP Video Control Register */ -#define SP_DP_VIDEO_CTRL_REG 0x84 -#define SP_COLOR_F_MASK 0x06 -#define SP_COLOR_F_SHIFT 1 -#define SP_BPC_MASK 0xe0 -#define SP_BPC_SHIFT 5 -# define SP_BPC_6BITS 0x00 -# define SP_BPC_8BITS 0x01 -# define SP_BPC_10BITS 0x02 -# define SP_BPC_12BITS 0x03 - -/* DP Audio Control Register */ -#define SP_DP_AUDIO_CTRL_REG 0x87 -#define SP_AUD_EN BIT(0) - -/* 10us Pulse Generate Timer Registers */ -#define SP_I2C_GEN_10US_TIMER0_REG 0x88 -#define SP_I2C_GEN_10US_TIMER1_REG 0x89 - -/* Packet Send Control Register */ -#define SP_PACKET_SEND_CTRL_REG 0x90 -#define SP_AUD_IF_UP BIT(7) -#define SP_AVI_IF_UD BIT(6) -#define SP_MPEG_IF_UD BIT(5) -#define SP_SPD_IF_UD BIT(4) -#define SP_AUD_IF_EN BIT(3) -#define SP_AVI_IF_EN BIT(2) -#define SP_MPEG_IF_EN BIT(1) -#define SP_SPD_IF_EN BIT(0) - -/* DP HDCP Control Register */ -#define SP_DP_HDCP_CTRL_REG 0x92 -#define SP_AUTO_EN BIT(7) -#define SP_AUTO_START BIT(5) -#define SP_LINK_POLLING BIT(1) - -/* DP Main Link Bandwidth Setting Register */ -#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0 -#define SP_LINK_BW_SET_MASK 0x1f -#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5) - -/* DP Training Pattern Set Register */ -#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2 - -/* DP Lane 0 Link Training Control Register */ -#define SP_DP_LANE0_LT_CTRL_REG 0xa3 -#define SP_TX_SW_SET_MASK 0x1b -#define SP_MAX_PRE_REACH BIT(5) -#define SP_MAX_DRIVE_REACH BIT(4) -#define SP_PRE_EMP_LEVEL1 BIT(3) -#define SP_DRVIE_CURRENT_LEVEL1 BIT(0) - -/* DP Link Training Control Register */ -#define SP_DP_LT_CTRL_REG 0xa8 -#define SP_LT_ERROR_TYPE_MASK 0x70 -# define SP_LT_NO_ERROR 0x00 -# define SP_LT_AUX_WRITE_ERROR 0x01 -# define SP_LT_MAX_DRIVE_REACHED 0x02 -# define SP_LT_WRONG_LANE_COUNT_SET 0x03 -# define SP_LT_LOOP_SAME_5_TIME 0x04 -# define SP_LT_CR_FAIL_IN_EQ 0x05 -# define SP_LT_EQ_LOOP_5_TIME 0x06 -#define SP_LT_EN BIT(0) - -/* DP CEP Training Control Registers */ -#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9 -#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa - -/* DP Debug Register 1 */ -#define SP_DP_DEBUG1_REG 0xb0 -#define SP_DEBUG_PLL_LOCK BIT(4) -#define SP_POLLING_EN BIT(1) - -/* DP Polling Control Register */ -#define SP_DP_POLLING_CTRL_REG 0xb4 -#define SP_AUTO_POLLING_DISABLE BIT(0) - -/* DP Link Debug Control Register */ -#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8 -#define SP_M_VID_DEBUG BIT(5) -#define SP_NEW_PRBS7 BIT(4) -#define SP_INSERT_ER BIT(1) -#define SP_PRBS31_EN BIT(0) - -/* AUX Misc control Register */ -#define SP_AUX_MISC_CTRL_REG 0xbf - -/* DP PLL control Register */ -#define SP_DP_PLL_CTRL_REG 0xc7 -#define SP_PLL_RST BIT(6) - -/* DP Analog Power Down Register */ -#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8 -#define SP_CH0_PD BIT(0) - -/* DP Misc Control Register */ -#define SP_DP_MISC_CTRL_REG 0xcd -#define SP_EQ_TRAINING_LOOP BIT(6) - -/* DP Extra I2C Device Address Register */ -#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce -#define SP_I2C_STRETCH_DISABLE BIT(7) - -#define SP_I2C_EXTRA_ADDR 0x50 - -/* DP Downspread Control Register 1 */ -#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0 - -/* DP M Value Calculation Control Register */ -#define SP_DP_M_CALCULATION_CTRL_REG 0xd9 -#define SP_M_GEN_CLK_SEL BIT(0) - -/* AUX Channel Access Status Register */ -#define SP_AUX_CH_STATUS_REG 0xe0 -#define SP_AUX_STATUS 0x0f - -/* AUX Channel DEFER Control Register */ -#define SP_AUX_DEFER_CTRL_REG 0xe2 -#define SP_DEFER_CTRL_EN BIT(7) - -/* DP Buffer Data Count Register */ -#define SP_BUF_DATA_COUNT_REG 0xe4 -#define SP_BUF_DATA_COUNT_MASK 0x1f -#define SP_BUF_CLR BIT(7) - -/* DP AUX Channel Control Register 1 */ -#define SP_DP_AUX_CH_CTRL1_REG 0xe5 -#define SP_AUX_TX_COMM_MASK 0x0f -#define SP_AUX_LENGTH_MASK 0xf0 -#define SP_AUX_LENGTH_SHIFT 4 - -/* DP AUX CH Address Register 0 */ -#define SP_AUX_ADDR_7_0_REG 0xe6 - -/* DP AUX CH Address Register 1 */ -#define SP_AUX_ADDR_15_8_REG 0xe7 - -/* DP AUX CH Address Register 2 */ -#define SP_AUX_ADDR_19_16_REG 0xe8 -#define SP_AUX_ADDR_19_16_MASK 0x0f - -/* DP AUX Channel Control Register 2 */ -#define SP_DP_AUX_CH_CTRL2_REG 0xe9 -#define SP_AUX_SEL_RXCM BIT(6) -#define SP_AUX_CHSEL BIT(3) -#define SP_AUX_PN_INV BIT(2) -#define SP_ADDR_ONLY BIT(1) -#define SP_AUX_EN BIT(0) - -/* DP Video Stream Control InfoFrame Register */ -#define SP_DP_3D_VSC_CTRL_REG 0xea -#define SP_INFO_FRAME_VSC_EN BIT(0) - -/* DP Video Stream Data Byte 1 Register */ -#define SP_DP_VSC_DB1_REG 0xeb - -/* DP AUX Channel Control Register 3 */ -#define SP_DP_AUX_CH_CTRL3_REG 0xec -#define SP_WAIT_COUNTER_7_0_MASK 0xff - -/* DP AUX Channel Control Register 4 */ -#define SP_DP_AUX_CH_CTRL4_REG 0xed - -/* DP AUX Buffer Data Registers */ -#define SP_DP_BUF_DATA0_REG 0xf0 - -/***************************************************************/ -/* Register definitions for TX_P2 */ -/***************************************************************/ - -/* - * Core Register Definitions - */ - -/* Device ID Low Byte Register */ -#define SP_DEVICE_IDL_REG 0x02 - -/* Device ID High Byte Register */ -#define SP_DEVICE_IDH_REG 0x03 - -/* Device version register */ -#define SP_DEVICE_VERSION_REG 0x04 - -/* Power Down Control Register */ -#define SP_POWERDOWN_CTRL_REG 0x05 -#define SP_REGISTER_PD BIT(7) -#define SP_HDCP_PD BIT(5) -#define SP_AUDIO_PD BIT(4) -#define SP_VIDEO_PD BIT(3) -#define SP_LINK_PD BIT(2) -#define SP_TOTAL_PD BIT(1) - -/* Reset Control Register 1 */ -#define SP_RESET_CTRL1_REG 0x06 -#define SP_MISC_RST BIT(7) -#define SP_VIDCAP_RST BIT(6) -#define SP_VIDFIF_RST BIT(5) -#define SP_AUDFIF_RST BIT(4) -#define SP_AUDCAP_RST BIT(3) -#define SP_HDCP_RST BIT(2) -#define SP_SW_RST BIT(1) -#define SP_HW_RST BIT(0) - -/* Reset Control Register 2 */ -#define SP_RESET_CTRL2_REG 0x07 -#define SP_AUX_RST BIT(2) -#define SP_SERDES_FIFO_RST BIT(1) -#define SP_I2C_REG_RST BIT(0) - -/* Video Control Register 1 */ -#define SP_VID_CTRL1_REG 0x08 -#define SP_VIDEO_EN BIT(7) -#define SP_VIDEO_MUTE BIT(2) -#define SP_DE_GEN BIT(1) -#define SP_DEMUX BIT(0) - -/* Video Control Register 2 */ -#define SP_VID_CTRL2_REG 0x09 -#define SP_IN_COLOR_F_MASK 0x03 -#define SP_IN_YC_BIT_SEL BIT(2) -#define SP_IN_BPC_MASK 0x70 -#define SP_IN_BPC_SHIFT 4 -# define SP_IN_BPC_12BIT 0x03 -# define SP_IN_BPC_10BIT 0x02 -# define SP_IN_BPC_8BIT 0x01 -# define SP_IN_BPC_6BIT 0x00 -#define SP_IN_D_RANGE BIT(7) - -/* Video Control Register 3 */ -#define SP_VID_CTRL3_REG 0x0a -#define SP_HPD_OUT BIT(6) - -/* Video Control Register 5 */ -#define SP_VID_CTRL5_REG 0x0c -#define SP_CSC_STD_SEL BIT(7) -#define SP_XVYCC_RNG_LMT BIT(6) -#define SP_RANGE_Y2R BIT(5) -#define SP_CSPACE_Y2R BIT(4) -#define SP_RGB_RNG_LMT BIT(3) -#define SP_Y_RNG_LMT BIT(2) -#define SP_RANGE_R2Y BIT(1) -#define SP_CSPACE_R2Y BIT(0) - -/* Video Control Register 6 */ -#define SP_VID_CTRL6_REG 0x0d -#define SP_TEST_PATTERN_EN BIT(7) -#define SP_VIDEO_PROCESS_EN BIT(6) -#define SP_VID_US_MODE BIT(3) -#define SP_VID_DS_MODE BIT(2) -#define SP_UP_SAMPLE BIT(1) -#define SP_DOWN_SAMPLE BIT(0) - -/* Video Control Register 8 */ -#define SP_VID_CTRL8_REG 0x0f -#define SP_VID_VRES_TH BIT(0) - -/* Total Line Status Low Byte Register */ -#define SP_TOTAL_LINE_STAL_REG 0x24 - -/* Total Line Status High Byte Register */ -#define SP_TOTAL_LINE_STAH_REG 0x25 - -/* Active Line Status Low Byte Register */ -#define SP_ACT_LINE_STAL_REG 0x26 - -/* Active Line Status High Byte Register */ -#define SP_ACT_LINE_STAH_REG 0x27 - -/* Vertical Front Porch Status Register */ -#define SP_V_F_PORCH_STA_REG 0x28 - -/* Vertical SYNC Width Status Register */ -#define SP_V_SYNC_STA_REG 0x29 - -/* Vertical Back Porch Status Register */ -#define SP_V_B_PORCH_STA_REG 0x2a - -/* Total Pixel Status Low Byte Register */ -#define SP_TOTAL_PIXEL_STAL_REG 0x2b - -/* Total Pixel Status High Byte Register */ -#define SP_TOTAL_PIXEL_STAH_REG 0x2c - -/* Active Pixel Status Low Byte Register */ -#define SP_ACT_PIXEL_STAL_REG 0x2d - -/* Active Pixel Status High Byte Register */ -#define SP_ACT_PIXEL_STAH_REG 0x2e - -/* Horizontal Front Porch Status Low Byte Register */ -#define SP_H_F_PORCH_STAL_REG 0x2f - -/* Horizontal Front Porch Statys High Byte Register */ -#define SP_H_F_PORCH_STAH_REG 0x30 - -/* Horizontal SYNC Width Status Low Byte Register */ -#define SP_H_SYNC_STAL_REG 0x31 - -/* Horizontal SYNC Width Status High Byte Register */ -#define SP_H_SYNC_STAH_REG 0x32 - -/* Horizontal Back Porch Status Low Byte Register */ -#define SP_H_B_PORCH_STAL_REG 0x33 - -/* Horizontal Back Porch Status High Byte Register */ -#define SP_H_B_PORCH_STAH_REG 0x34 - -/* InfoFrame AVI Packet DB1 Register */ -#define SP_INFOFRAME_AVI_DB1_REG 0x70 - -/* Bit Control Specific Register */ -#define SP_BIT_CTRL_SPECIFIC_REG 0x80 -#define SP_BIT_CTRL_SELECT_SHIFT 1 -#define SP_ENABLE_BIT_CTRL BIT(0) - -/* InfoFrame Audio Packet DB1 Register */ -#define SP_INFOFRAME_AUD_DB1_REG 0x83 - -/* InfoFrame MPEG Packet DB1 Register */ -#define SP_INFOFRAME_MPEG_DB1_REG 0xb0 - -/* Audio Channel Status Registers */ -#define SP_AUD_CH_STATUS_BASE 0xd0 - -/* Audio Channel Num Register 5 */ -#define SP_I2S_CHANNEL_NUM_MASK 0xe0 -# define SP_I2S_CH_NUM_1 (0x00 << 5) -# define SP_I2S_CH_NUM_2 (0x01 << 5) -# define SP_I2S_CH_NUM_3 (0x02 << 5) -# define SP_I2S_CH_NUM_4 (0x03 << 5) -# define SP_I2S_CH_NUM_5 (0x04 << 5) -# define SP_I2S_CH_NUM_6 (0x05 << 5) -# define SP_I2S_CH_NUM_7 (0x06 << 5) -# define SP_I2S_CH_NUM_8 (0x07 << 5) -#define SP_EXT_VUCP BIT(2) -#define SP_VBIT BIT(1) -#define SP_AUDIO_LAYOUT BIT(0) - -/* Analog Debug Register 2 */ -#define SP_ANALOG_DEBUG2_REG 0xdd -#define SP_FORCE_SW_OFF_BYPASS 0x20 -#define SP_XTAL_FRQ 0x1c -# define SP_XTAL_FRQ_19M2 (0x00 << 2) -# define SP_XTAL_FRQ_24M (0x01 << 2) -# define SP_XTAL_FRQ_25M (0x02 << 2) -# define SP_XTAL_FRQ_26M (0x03 << 2) -# define SP_XTAL_FRQ_27M (0x04 << 2) -# define SP_XTAL_FRQ_38M4 (0x05 << 2) -# define SP_XTAL_FRQ_52M (0x06 << 2) -#define SP_POWERON_TIME_1P5MS 0x03 - -/* Analog Control 0 Register */ -#define SP_ANALOG_CTRL0_REG 0xe1 - -/* Common Interrupt Status Register 1 */ -#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1) -#define SP_PLL_LOCK_CHG 0x40 - -/* Common Interrupt Status Register 2 */ -#define SP_COMMON_INT_STATUS2 0xf2 -#define SP_HDCP_AUTH_CHG BIT(1) -#define SP_HDCP_AUTH_DONE BIT(0) - -#define SP_HDCP_LINK_CHECK_FAIL BIT(0) - -/* Common Interrupt Status Register 4 */ -#define SP_COMMON_INT_STATUS4_REG 0xf4 -#define SP_HPD_IRQ BIT(6) -#define SP_HPD_ESYNC_ERR BIT(4) -#define SP_HPD_CHG BIT(2) -#define SP_HPD_LOST BIT(1) -#define SP_HPD_PLUG BIT(0) - -/* DP Interrupt Status Register */ -#define SP_DP_INT_STATUS1_REG 0xf7 -#define SP_TRAINING_FINISH BIT(5) -#define SP_POLLING_ERR BIT(4) - -/* Common Interrupt Mask Register */ -#define SP_COMMON_INT_MASK_BASE (0xf8 - 1) - -#define SP_COMMON_INT_MASK4_REG 0xfb - -/* DP Interrupts Mask Register */ -#define SP_DP_INT_MASK1_REG 0xfe - -/* Interrupt Control Register */ -#define SP_INT_CTRL_REG 0xff - -/***************************************************************/ -/* Register definitions for TX_P1 */ -/***************************************************************/ - -/* DP TX Link Training Control Register */ -#define SP_DP_TX_LT_CTRL0_REG 0x30 - -/* PD 1.2 Lint Training 80bit Pattern Register */ -#define SP_DP_LT_80BIT_PATTERN0_REG 0x80 -#define SP_DP_LT_80BIT_PATTERN_REG_NUM 10 - -/* Audio Interface Control Register 0 */ -#define SP_AUD_INTERFACE_CTRL0_REG 0x5f -#define SP_AUD_INTERFACE_DISABLE 0x80 - -/* Audio Interface Control Register 2 */ -#define SP_AUD_INTERFACE_CTRL2_REG 0x60 -#define SP_M_AUD_ADJUST_ST 0x04 - -/* Audio Interface Control Register 3 */ -#define SP_AUD_INTERFACE_CTRL3_REG 0x62 - -/* Audio Interface Control Register 4 */ -#define SP_AUD_INTERFACE_CTRL4_REG 0x67 - -/* Audio Interface Control Register 5 */ -#define SP_AUD_INTERFACE_CTRL5_REG 0x68 - -/* Audio Interface Control Register 6 */ -#define SP_AUD_INTERFACE_CTRL6_REG 0x69 - -/* Firmware Version Register */ -#define SP_FW_VER_REG 0xb7 - -#endif diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig index e930ff9b5cd4..e1fa7d820373 100644 --- a/drivers/gpu/drm/bridge/analogix/Kconfig +++ b/drivers/gpu/drm/bridge/analogix/Kconfig @@ -1,4 +1,27 @@ # SPDX-License-Identifier: GPL-2.0-only +config DRM_ANALOGIX_ANX6345 + tristate "Analogix ANX6345 bridge" + depends on OF + select DRM_ANALOGIX_DP + select DRM_KMS_HELPER + select REGMAP_I2C + help + ANX6345 is an ultra-low Full-HD DisplayPort/eDP + transmitter designed for portable devices. The + ANX6345 transforms the LVTTL RGB output of an + application processor to eDP or DisplayPort. + +config DRM_ANALOGIX_ANX78XX + tristate "Analogix ANX78XX bridge" + select DRM_ANALOGIX_DP + select DRM_KMS_HELPER + select REGMAP_I2C + help + ANX78XX is an ultra-low power Full-HD SlimPort transmitter + designed for portable devices. The ANX78XX transforms + the HDMI output of an application processor to MyDP + or DisplayPort. + config DRM_ANALOGIX_DP tristate depends on DRM diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile index fdbf3fd2f087..97669b374098 100644 --- a/drivers/gpu/drm/bridge/analogix/Makefile +++ b/drivers/gpu/drm/bridge/analogix/Makefile @@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o +analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o analogix-i2c-dptx.o +obj-$(CONFIG_DRM_ANALOGIX_ANX6345) += analogix-anx6345.o +obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c new file mode 100644 index 000000000000..56f55c53abfd --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c @@ -0,0 +1,817 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2016, Analogix Semiconductor. + * Copyright(c) 2017, Icenowy Zheng <icenowy@aosc.io> + * + * Based on anx7808 driver obtained from chromeos with copyright: + * Copyright(c) 2013, Google Inc. + */ +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/types.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> + +#include "analogix-i2c-dptx.h" +#include "analogix-i2c-txcommon.h" + +#define POLL_DELAY 50000 /* us */ +#define POLL_TIMEOUT 5000000 /* us */ + +#define I2C_IDX_DPTX 0 +#define I2C_IDX_TXCOM 1 + +static const u8 anx6345_i2c_addresses[] = { + [I2C_IDX_DPTX] = 0x70, + [I2C_IDX_TXCOM] = 0x72, +}; +#define I2C_NUM_ADDRESSES ARRAY_SIZE(anx6345_i2c_addresses) + +struct anx6345 { + struct drm_dp_aux aux; + struct drm_bridge bridge; + struct i2c_client *client; + struct edid *edid; + struct drm_connector connector; + struct drm_panel *panel; + struct regulator *dvdd12; + struct regulator *dvdd25; + struct gpio_desc *gpiod_reset; + struct mutex lock; /* protect EDID access */ + + /* I2C Slave addresses of ANX6345 are mapped as DPTX and SYS */ + struct i2c_client *i2c_clients[I2C_NUM_ADDRESSES]; + struct regmap *map[I2C_NUM_ADDRESSES]; + + u16 chipid; + u8 dpcd[DP_RECEIVER_CAP_SIZE]; + + bool powered; +}; + +static inline struct anx6345 *connector_to_anx6345(struct drm_connector *c) +{ + return container_of(c, struct anx6345, connector); +} + +static inline struct anx6345 *bridge_to_anx6345(struct drm_bridge *bridge) +{ + return container_of(bridge, struct anx6345, bridge); +} + +static int anx6345_set_bits(struct regmap *map, u8 reg, u8 mask) +{ + return regmap_update_bits(map, reg, mask, mask); +} + +static int anx6345_clear_bits(struct regmap *map, u8 reg, u8 mask) +{ + return regmap_update_bits(map, reg, mask, 0); +} + +static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg) +{ + struct anx6345 *anx6345 = container_of(aux, struct anx6345, aux); + + return anx_dp_aux_transfer(anx6345->map[I2C_IDX_DPTX], msg); +} + +static int anx6345_dp_link_training(struct anx6345 *anx6345) +{ + unsigned int value; + u8 dp_bw, dpcd[2]; + int err; + + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], + SP_POWERDOWN_CTRL_REG, + SP_TOTAL_PD); + if (err) + return err; + + err = drm_dp_dpcd_readb(&anx6345->aux, DP_MAX_LINK_RATE, &dp_bw); + if (err < 0) + return err; + + switch (dp_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + + default: + DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw); + return -EINVAL; + } + + err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG, + SP_VIDEO_MUTE); + if (err) + return err; + + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], + SP_VID_CTRL1_REG, SP_VIDEO_EN); + if (err) + return err; + + /* Get DPCD info */ + err = drm_dp_dpcd_read(&anx6345->aux, DP_DPCD_REV, + &anx6345->dpcd, DP_RECEIVER_CAP_SIZE); + if (err < 0) { + DRM_ERROR("Failed to read DPCD: %d\n", err); + return err; + } + + /* Clear channel x SERDES power down */ + err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX], + SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD); + if (err) + return err; + + /* + * Power up the sink (DP_SET_POWER register is only available on DPCD + * v1.1 and later). + */ + if (anx6345->dpcd[DP_DPCD_REV] >= 0x11) { + err = drm_dp_dpcd_readb(&anx6345->aux, DP_SET_POWER, &dpcd[0]); + if (err < 0) { + DRM_ERROR("Failed to read DP_SET_POWER register: %d\n", + err); + return err; + } + + dpcd[0] &= ~DP_SET_POWER_MASK; + dpcd[0] |= DP_SET_POWER_D0; + + err = drm_dp_dpcd_writeb(&anx6345->aux, DP_SET_POWER, dpcd[0]); + if (err < 0) { + DRM_ERROR("Failed to power up DisplayPort link: %d\n", + err); + return err; + } + + /* + * According to the DP 1.1 specification, a "Sink Device must + * exit the power saving state within 1 ms" (Section 2.5.3.1, + * Table 5-52, "Sink Control Field" (register 0x600). + */ + usleep_range(1000, 2000); + } + + /* Possibly enable downspread on the sink */ + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_DOWNSPREAD_CTRL1_REG, 0); + if (err) + return err; + + if (anx6345->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) { + DRM_DEBUG("Enable downspread on the sink\n"); + /* 4000PPM */ + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_DOWNSPREAD_CTRL1_REG, 8); + if (err) + return err; + + err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, + DP_SPREAD_AMP_0_5); + if (err < 0) + return err; + } else { + err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, 0); + if (err < 0) + return err; + } + + /* Set the lane count and the link rate on the sink */ + if (drm_dp_enhanced_frame_cap(anx6345->dpcd)) + err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX], + SP_DP_SYSTEM_CTRL_BASE + 4, + SP_ENHANCED_MODE); + else + err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX], + SP_DP_SYSTEM_CTRL_BASE + 4, + SP_ENHANCED_MODE); + if (err) + return err; + + dpcd[0] = drm_dp_max_link_rate(anx6345->dpcd); + dpcd[0] = drm_dp_link_rate_to_bw_code(dpcd[0]); + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_MAIN_LINK_BW_SET_REG, dpcd[0]); + if (err) + return err; + + dpcd[1] = drm_dp_max_lane_count(anx6345->dpcd); + + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_LANE_COUNT_SET_REG, dpcd[1]); + if (err) + return err; + + if (drm_dp_enhanced_frame_cap(anx6345->dpcd)) + dpcd[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + + err = drm_dp_dpcd_write(&anx6345->aux, DP_LINK_BW_SET, dpcd, + sizeof(dpcd)); + + if (err < 0) { + DRM_ERROR("Failed to configure link: %d\n", err); + return err; + } + + /* Start training on the source */ + err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_LT_CTRL_REG, + SP_LT_EN); + if (err) + return err; + + return regmap_read_poll_timeout(anx6345->map[I2C_IDX_DPTX], + SP_DP_LT_CTRL_REG, + value, !(value & SP_DP_LT_INPROGRESS), + POLL_DELAY, POLL_TIMEOUT); +} + +static int anx6345_tx_initialization(struct anx6345 *anx6345) +{ + int err, i; + + /* FIXME: colordepth is hardcoded for now */ + err = regmap_write(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL2_REG, + SP_IN_BPC_6BIT << SP_IN_BPC_SHIFT); + if (err) + return err; + + err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_PLL_CTRL_REG, 0); + if (err) + return err; + + err = regmap_write(anx6345->map[I2C_IDX_TXCOM], + SP_ANALOG_DEBUG1_REG, 0); + if (err) + return err; + + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_LINK_DEBUG_CTRL_REG, + SP_NEW_PRBS7 | SP_M_VID_DEBUG); + if (err) + return err; + + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_ANALOG_POWER_DOWN_REG, 0); + if (err) + return err; + + /* Force HPD */ + err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX], + SP_DP_SYSTEM_CTRL_BASE + 3, + SP_HPD_FORCE | SP_HPD_CTRL); + if (err) + return err; + + for (i = 0; i < 4; i++) { + /* 4 lanes */ + err = regmap_write(anx6345->map[I2C_IDX_DPTX], + SP_DP_LANE0_LT_CTRL_REG + i, 0); + if (err) + return err; + } + + /* Reset AUX */ + err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], + SP_RESET_CTRL2_REG, SP_AUX_RST); + if (err) + return err; + + return anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], + SP_RESET_CTRL2_REG, SP_AUX_RST); +} + +static void anx6345_poweron(struct anx6345 *anx6345) +{ + int err; + + /* Ensure reset is asserted before starting power on sequence */ + gpiod_set_value_cansleep(anx6345->gpiod_reset, 1); + usleep_range(1000, 2000); + + err = regulator_enable(anx6345->dvdd12); + if (err) { + DRM_ERROR("Failed to enable dvdd12 regulator: %d\n", + err); + return; + } + + /* T1 - delay between VDD12 and VDD25 should be 0-2ms */ + usleep_range(1000, 2000); + + err = regulator_enable(anx6345->dvdd25); + if (err) { + DRM_ERROR("Failed to enable dvdd25 regulator: %d\n", + err); + return; + } + + /* T2 - delay between RESETN and all power rail stable, + * should be 2-5ms + */ + usleep_range(2000, 5000); + + gpiod_set_value_cansleep(anx6345->gpiod_reset, 0); + + /* Power on registers module */ + anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG, + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD); + anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG, + SP_REGISTER_PD | SP_TOTAL_PD); + + if (anx6345->panel) + drm_panel_prepare(anx6345->panel); + + anx6345->powered = true; +} + +static void anx6345_poweroff(struct anx6345 *anx6345) +{ + int err; + + gpiod_set_value_cansleep(anx6345->gpiod_reset, 1); + usleep_range(1000, 2000); + + if (anx6345->panel) + drm_panel_unprepare(anx6345->panel); + + err = regulator_disable(anx6345->dvdd25); + if (err) { + DRM_ERROR("Failed to disable dvdd25 regulator: %d\n", + err); + return; + } + + usleep_range(5000, 10000); + + err = regulator_disable(anx6345->dvdd12); + if (err) { + DRM_ERROR("Failed to disable dvdd12 regulator: %d\n", + err); + return; + } + + usleep_range(1000, 2000); + + anx6345->powered = false; +} + +static int anx6345_start(struct anx6345 *anx6345) +{ + int err; + + if (!anx6345->powered) + anx6345_poweron(anx6345); + + /* Power on needed modules */ + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], + SP_POWERDOWN_CTRL_REG, + SP_VIDEO_PD | SP_LINK_PD); + + err = anx6345_tx_initialization(anx6345); + if (err) { + DRM_ERROR("Failed eDP transmitter initialization: %d\n", err); + anx6345_poweroff(anx6345); + return err; + } + + err = anx6345_dp_link_training(anx6345); + if (err) { + DRM_ERROR("Failed link training: %d\n", err); + anx6345_poweroff(anx6345); + return err; + } + + /* + * This delay seems to help keep the hardware in a good state. Without + * it, there are times where it fails silently. + */ + usleep_range(10000, 15000); + + return 0; +} + +static int anx6345_config_dp_output(struct anx6345 *anx6345) +{ + int err; + + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG, + SP_VIDEO_MUTE); + if (err) + return err; + + /* Enable DP output */ + err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG, + SP_VIDEO_EN); + if (err) + return err; + + /* Force stream valid */ + return anx6345_set_bits(anx6345->map[I2C_IDX_DPTX], + SP_DP_SYSTEM_CTRL_BASE + 3, + SP_STRM_FORCE | SP_STRM_CTRL); +} + +static int anx6345_get_downstream_info(struct anx6345 *anx6345) +{ + u8 value; + int err; + + err = drm_dp_dpcd_readb(&anx6345->aux, DP_SINK_COUNT, &value); + if (err < 0) { + DRM_ERROR("Get sink count failed %d\n", err); + return err; + } + + if (!DP_GET_SINK_COUNT(value)) { + DRM_ERROR("Downstream disconnected\n"); + return -EIO; + } + + return 0; +} + +static int anx6345_get_modes(struct drm_connector *connector) +{ + struct anx6345 *anx6345 = connector_to_anx6345(connector); + int err, num_modes = 0; + bool power_off = false; + + mutex_lock(&anx6345->lock); + + if (!anx6345->edid) { + if (!anx6345->powered) { + anx6345_poweron(anx6345); + power_off = true; + } + + err = anx6345_get_downstream_info(anx6345); + if (err) { + DRM_ERROR("Failed to get downstream info: %d\n", err); + goto unlock; + } + + anx6345->edid = drm_get_edid(connector, &anx6345->aux.ddc); + if (!anx6345->edid) + DRM_ERROR("Failed to read EDID from panel\n"); + + err = drm_connector_update_edid_property(connector, + anx6345->edid); + if (err) { + DRM_ERROR("Failed to update EDID property: %d\n", err); + goto unlock; + } + } + + num_modes += drm_add_edid_modes(connector, anx6345->edid); + +unlock: + if (power_off) + anx6345_poweroff(anx6345); + + mutex_unlock(&anx6345->lock); + + if (!num_modes && anx6345->panel) + num_modes += drm_panel_get_modes(anx6345->panel, connector); + + return num_modes; +} + +static const struct drm_connector_helper_funcs anx6345_connector_helper_funcs = { + .get_modes = anx6345_get_modes, +}; + +static void +anx6345_connector_destroy(struct drm_connector *connector) +{ + struct anx6345 *anx6345 = connector_to_anx6345(connector); + + if (anx6345->panel) + drm_panel_detach(anx6345->panel); + drm_connector_cleanup(connector); +} + +static const struct drm_connector_funcs anx6345_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = anx6345_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int anx6345_bridge_attach(struct drm_bridge *bridge) +{ + struct anx6345 *anx6345 = bridge_to_anx6345(bridge); + int err; + + if (!bridge->encoder) { + DRM_ERROR("Parent encoder object not found"); + return -ENODEV; + } + + /* Register aux channel */ + anx6345->aux.name = "DP-AUX"; + anx6345->aux.dev = &anx6345->client->dev; + anx6345->aux.transfer = anx6345_aux_transfer; + + err = drm_dp_aux_register(&anx6345->aux); + if (err < 0) { + DRM_ERROR("Failed to register aux channel: %d\n", err); + return err; + } + + err = drm_connector_init(bridge->dev, &anx6345->connector, + &anx6345_connector_funcs, + DRM_MODE_CONNECTOR_eDP); + if (err) { + DRM_ERROR("Failed to initialize connector: %d\n", err); + return err; + } + + drm_connector_helper_add(&anx6345->connector, + &anx6345_connector_helper_funcs); + + err = drm_connector_register(&anx6345->connector); + if (err) { + DRM_ERROR("Failed to register connector: %d\n", err); + return err; + } + + anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD; + + err = drm_connector_attach_encoder(&anx6345->connector, + bridge->encoder); + if (err) { + DRM_ERROR("Failed to link up connector to encoder: %d\n", err); + return err; + } + + if (anx6345->panel) { + err = drm_panel_attach(anx6345->panel, &anx6345->connector); + if (err) { + DRM_ERROR("Failed to attach panel: %d\n", err); + return err; + } + } + + return 0; +} + +static enum drm_mode_status +anx6345_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_mode *mode) +{ + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_NO_INTERLACE; + + /* Max 1200p at 5.4 Ghz, one lane */ + if (mode->clock > 154000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void anx6345_bridge_disable(struct drm_bridge *bridge) +{ + struct anx6345 *anx6345 = bridge_to_anx6345(bridge); + + /* Power off all modules except configuration registers access */ + anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG, + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD); + if (anx6345->panel) + drm_panel_disable(anx6345->panel); + + if (anx6345->powered) + anx6345_poweroff(anx6345); +} + +static void anx6345_bridge_enable(struct drm_bridge *bridge) +{ + struct anx6345 *anx6345 = bridge_to_anx6345(bridge); + int err; + + if (anx6345->panel) + drm_panel_enable(anx6345->panel); + + err = anx6345_start(anx6345); + if (err) { + DRM_ERROR("Failed to initialize: %d\n", err); + return; + } + + err = anx6345_config_dp_output(anx6345); + if (err) + DRM_ERROR("Failed to enable DP output: %d\n", err); +} + +static const struct drm_bridge_funcs anx6345_bridge_funcs = { + .attach = anx6345_bridge_attach, + .mode_valid = anx6345_bridge_mode_valid, + .disable = anx6345_bridge_disable, + .enable = anx6345_bridge_enable, +}; + +static void unregister_i2c_dummy_clients(struct anx6345 *anx6345) +{ + unsigned int i; + + for (i = 1; i < ARRAY_SIZE(anx6345->i2c_clients); i++) + if (anx6345->i2c_clients[i] && + anx6345->i2c_clients[i]->addr != anx6345->client->addr) + i2c_unregister_device(anx6345->i2c_clients[i]); +} + +static const struct regmap_config anx6345_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, + .cache_type = REGCACHE_NONE, +}; + +static const u16 anx6345_chipid_list[] = { + 0x6345, +}; + +static bool anx6345_get_chip_id(struct anx6345 *anx6345) +{ + unsigned int i, idl, idh, version; + + if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDL_REG, &idl)) + return false; + + if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDH_REG, &idh)) + return false; + + anx6345->chipid = (u8)idl | ((u8)idh << 8); + + if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_VERSION_REG, + &version)) + return false; + + for (i = 0; i < ARRAY_SIZE(anx6345_chipid_list); i++) { + if (anx6345->chipid == anx6345_chipid_list[i]) { + DRM_INFO("Found ANX%x (ver. %d) eDP Transmitter\n", + anx6345->chipid, version); + return true; + } + } + + DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n", + anx6345->chipid, version); + + return false; +} + +static int anx6345_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct anx6345 *anx6345; + struct device *dev; + int i, err; + + anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL); + if (!anx6345) + return -ENOMEM; + + mutex_init(&anx6345->lock); + + anx6345->bridge.of_node = client->dev.of_node; + + anx6345->client = client; + i2c_set_clientdata(client, anx6345); + + dev = &anx6345->client->dev; + + err = drm_of_find_panel_or_bridge(client->dev.of_node, 1, 0, + &anx6345->panel, NULL); + if (err == -EPROBE_DEFER) + return err; + + if (err) + DRM_DEBUG("No panel found\n"); + + /* 1.2V digital core power regulator */ + anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12-supply"); + if (IS_ERR(anx6345->dvdd12)) { + DRM_ERROR("dvdd12-supply not found\n"); + return PTR_ERR(anx6345->dvdd12); + } + + /* 2.5V digital core power regulator */ + anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25-supply"); + if (IS_ERR(anx6345->dvdd25)) { + DRM_ERROR("dvdd25-supply not found\n"); + return PTR_ERR(anx6345->dvdd25); + } + + /* GPIO for chip reset */ + anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(anx6345->gpiod_reset)) { + DRM_ERROR("Reset gpio not found\n"); + return PTR_ERR(anx6345->gpiod_reset); + } + + /* Map slave addresses of ANX6345 */ + for (i = 0; i < I2C_NUM_ADDRESSES; i++) { + if (anx6345_i2c_addresses[i] >> 1 != client->addr) + anx6345->i2c_clients[i] = i2c_new_dummy_device(client->adapter, + anx6345_i2c_addresses[i] >> 1); + else + anx6345->i2c_clients[i] = client; + + if (IS_ERR(anx6345->i2c_clients[i])) { + err = PTR_ERR(anx6345->i2c_clients[i]); + DRM_ERROR("Failed to reserve I2C bus %02x\n", + anx6345_i2c_addresses[i]); + goto err_unregister_i2c; + } + + anx6345->map[i] = devm_regmap_init_i2c(anx6345->i2c_clients[i], + &anx6345_regmap_config); + if (IS_ERR(anx6345->map[i])) { + err = PTR_ERR(anx6345->map[i]); + DRM_ERROR("Failed regmap initialization %02x\n", + anx6345_i2c_addresses[i]); + goto err_unregister_i2c; + } + } + + /* Look for supported chip ID */ + anx6345_poweron(anx6345); + if (anx6345_get_chip_id(anx6345)) { + anx6345->bridge.funcs = &anx6345_bridge_funcs; + drm_bridge_add(&anx6345->bridge); + + return 0; + } else { + anx6345_poweroff(anx6345); + err = -ENODEV; + } + +err_unregister_i2c: + unregister_i2c_dummy_clients(anx6345); + return err; +} + +static int anx6345_i2c_remove(struct i2c_client *client) +{ + struct anx6345 *anx6345 = i2c_get_clientdata(client); + + drm_bridge_remove(&anx6345->bridge); + + unregister_i2c_dummy_clients(anx6345); + + kfree(anx6345->edid); + + mutex_destroy(&anx6345->lock); + + return 0; +} + +static const struct i2c_device_id anx6345_id[] = { + { "anx6345", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, anx6345_id); + +static const struct of_device_id anx6345_match_table[] = { + { .compatible = "analogix,anx6345", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, anx6345_match_table); + +static struct i2c_driver anx6345_driver = { + .driver = { + .name = "anx6345", + .of_match_table = of_match_ptr(anx6345_match_table), + }, + .probe = anx6345_i2c_probe, + .remove = anx6345_i2c_remove, + .id_table = anx6345_id, +}; +module_i2c_driver(anx6345_driver); + +MODULE_DESCRIPTION("ANX6345 eDP Transmitter driver"); +MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c index 274989f96a91..41867be03751 100644 --- a/drivers/gpu/drm/bridge/analogix-anx78xx.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c @@ -36,8 +36,6 @@ #define I2C_IDX_RX_P1 4 #define XTAL_CLK 270 /* 27M */ -#define AUX_CH_BUFFER_SIZE 16 -#define AUX_WAIT_TIMEOUT_MS 15 static const u8 anx7808_i2c_addresses[] = { [I2C_IDX_TX_P0] = 0x78, @@ -107,153 +105,11 @@ static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask) return regmap_update_bits(map, reg, mask, 0); } -static bool anx78xx_aux_op_finished(struct anx78xx *anx78xx) -{ - unsigned int value; - int err; - - err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG, - &value); - if (err < 0) - return false; - - return (value & SP_AUX_EN) == 0; -} - -static int anx78xx_aux_wait(struct anx78xx *anx78xx) -{ - unsigned long timeout; - unsigned int status; - int err; - - timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1; - - while (!anx78xx_aux_op_finished(anx78xx)) { - if (time_after(jiffies, timeout)) { - if (!anx78xx_aux_op_finished(anx78xx)) { - DRM_ERROR("Timed out waiting AUX to finish\n"); - return -ETIMEDOUT; - } - - break; - } - - usleep_range(1000, 2000); - } - - /* Read the AUX channel access status */ - err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG, - &status); - if (err < 0) { - DRM_ERROR("Failed to read from AUX channel: %d\n", err); - return err; - } - - if (status & SP_AUX_STATUS) { - DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n", - status); - return -ETIMEDOUT; - } - - return 0; -} - -static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr) -{ - int err; - - err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG, - addr & 0xff); - if (err) - return err; - - err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG, - (addr & 0xff00) >> 8); - if (err) - return err; - - /* - * DP AUX CH Address Register #2, only update bits[3:0] - * [7:4] RESERVED - * [3:0] AUX_ADDR[19:16], Register control AUX CH address. - */ - err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0], - SP_AUX_ADDR_19_16_REG, - SP_AUX_ADDR_19_16_MASK, - (addr & 0xf0000) >> 16); - - if (err) - return err; - - return 0; -} - static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) { struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux); - u8 ctrl1 = msg->request; - u8 ctrl2 = SP_AUX_EN; - u8 *buffer = msg->buffer; - int err; - - /* The DP AUX transmit and receive buffer has 16 bytes. */ - if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE)) - return -E2BIG; - - /* Zero-sized messages specify address-only transactions. */ - if (msg->size < 1) - ctrl2 |= SP_ADDR_ONLY; - else /* For non-zero-sized set the length field. */ - ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT; - - if ((msg->request & DP_AUX_I2C_READ) == 0) { - /* When WRITE | MOT write values to data buffer */ - err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0], - SP_DP_BUF_DATA0_REG, buffer, - msg->size); - if (err) - return err; - } - - /* Write address and request */ - err = anx78xx_aux_address(anx78xx, msg->address); - if (err) - return err; - - err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG, - ctrl1); - if (err) - return err; - - /* Start transaction */ - err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0], - SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY | - SP_AUX_EN, ctrl2); - if (err) - return err; - - err = anx78xx_aux_wait(anx78xx); - if (err) - return err; - - msg->reply = DP_AUX_I2C_REPLY_ACK; - - if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) { - /* Read values from data buffer */ - err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0], - SP_DP_BUF_DATA0_REG, buffer, - msg->size); - if (err) - return err; - } - - err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0], - SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY); - if (err) - return err; - - return msg->size; + return anx_dp_aux_transfer(anx78xx->map[I2C_IDX_TX_P0], msg); } static int anx78xx_set_hpd(struct anx78xx *anx78xx) diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h new file mode 100644 index 000000000000..db2a2725acb2 --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h @@ -0,0 +1,249 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. + */ + +#ifndef __ANX78xx_H +#define __ANX78xx_H + +#include "analogix-i2c-dptx.h" +#include "analogix-i2c-txcommon.h" + +/***************************************************************/ +/* Register definitions for RX_PO */ +/***************************************************************/ + +/* + * System Control and Status + */ + +/* Software Reset Register 1 */ +#define SP_SOFTWARE_RESET1_REG 0x11 +#define SP_VIDEO_RST BIT(4) +#define SP_HDCP_MAN_RST BIT(2) +#define SP_TMDS_RST BIT(1) +#define SP_SW_MAN_RST BIT(0) + +/* System Status Register */ +#define SP_SYSTEM_STATUS_REG 0x14 +#define SP_TMDS_CLOCK_DET BIT(1) +#define SP_TMDS_DE_DET BIT(0) + +/* HDMI Status Register */ +#define SP_HDMI_STATUS_REG 0x15 +#define SP_HDMI_AUD_LAYOUT BIT(3) +#define SP_HDMI_DET BIT(0) +# define SP_DVI_MODE 0 +# define SP_HDMI_MODE 1 + +/* HDMI Mute Control Register */ +#define SP_HDMI_MUTE_CTRL_REG 0x16 +#define SP_AUD_MUTE BIT(1) +#define SP_VID_MUTE BIT(0) + +/* System Power Down Register 1 */ +#define SP_SYSTEM_POWER_DOWN1_REG 0x18 +#define SP_PWDN_CTRL BIT(0) + +/* + * Audio and Video Auto Control + */ + +/* Auto Audio and Video Control register */ +#define SP_AUDVID_CTRL_REG 0x20 +#define SP_AVC_OE BIT(7) +#define SP_AAC_OE BIT(6) +#define SP_AVC_EN BIT(1) +#define SP_AAC_EN BIT(0) + +/* Audio Exception Enable Registers */ +#define SP_AUD_EXCEPTION_ENABLE_BASE (0x24 - 1) +/* Bits for Audio Exception Enable Register 3 */ +#define SP_AEC_EN21 BIT(5) + +/* + * Interrupt + */ + +/* Interrupt Status Register 1 */ +#define SP_INT_STATUS1_REG 0x31 +/* Bits for Interrupt Status Register 1 */ +#define SP_HDMI_DVI BIT(7) +#define SP_CKDT_CHG BIT(6) +#define SP_SCDT_CHG BIT(5) +#define SP_PCLK_CHG BIT(4) +#define SP_PLL_UNLOCK BIT(3) +#define SP_CABLE_PLUG_CHG BIT(2) +#define SP_SET_MUTE BIT(1) +#define SP_SW_INTR BIT(0) +/* Bits for Interrupt Status Register 2 */ +#define SP_HDCP_ERR BIT(5) +#define SP_AUDIO_SAMPLE_CHG BIT(0) /* undocumented */ +/* Bits for Interrupt Status Register 3 */ +#define SP_AUD_MODE_CHG BIT(0) +/* Bits for Interrupt Status Register 5 */ +#define SP_AUDIO_RCV BIT(0) +/* Bits for Interrupt Status Register 6 */ +#define SP_INT_STATUS6_REG 0x36 +#define SP_CTS_RCV BIT(7) +#define SP_NEW_AUD_PKT BIT(4) +#define SP_NEW_AVI_PKT BIT(1) +#define SP_NEW_CP_PKT BIT(0) +/* Bits for Interrupt Status Register 7 */ +#define SP_NO_VSI BIT(7) +#define SP_NEW_VS BIT(4) + +/* Interrupt Mask 1 Status Registers */ +#define SP_INT_MASK1_REG 0x41 + +/* HDMI US TIMER Control Register */ +#define SP_HDMI_US_TIMER_CTRL_REG 0x49 +#define SP_MS_TIMER_MARGIN_10_8_MASK 0x07 + +/* + * TMDS Control + */ + +/* TMDS Control Registers */ +#define SP_TMDS_CTRL_BASE (0x50 - 1) +/* Bits for TMDS Control Register 7 */ +#define SP_PD_RT BIT(0) + +/* + * Video Control + */ + +/* Video Status Register */ +#define SP_VIDEO_STATUS_REG 0x70 +#define SP_COLOR_DEPTH_MASK 0xf0 +#define SP_COLOR_DEPTH_SHIFT 4 +# define SP_COLOR_DEPTH_MODE_LEGACY 0x00 +# define SP_COLOR_DEPTH_MODE_24BIT 0x04 +# define SP_COLOR_DEPTH_MODE_30BIT 0x05 +# define SP_COLOR_DEPTH_MODE_36BIT 0x06 +# define SP_COLOR_DEPTH_MODE_48BIT 0x07 + +/* Video Data Range Control Register */ +#define SP_VID_DATA_RANGE_CTRL_REG 0x83 +#define SP_R2Y_INPUT_LIMIT BIT(1) + +/* Pixel Clock High Resolution Counter Registers */ +#define SP_PCLK_HIGHRES_CNT_BASE (0x8c - 1) + +/* + * Audio Control + */ + +/* Number of Audio Channels Status Registers */ +#define SP_AUD_CH_STATUS_REG_NUM 6 + +/* Audio IN S/PDIF Channel Status Registers */ +#define SP_AUD_SPDIF_CH_STATUS_BASE 0xc7 + +/* Audio IN S/PDIF Channel Status Register 4 */ +#define SP_FS_FREQ_MASK 0x0f +# define SP_FS_FREQ_44100HZ 0x00 +# define SP_FS_FREQ_48000HZ 0x02 +# define SP_FS_FREQ_32000HZ 0x03 +# define SP_FS_FREQ_88200HZ 0x08 +# define SP_FS_FREQ_96000HZ 0x0a +# define SP_FS_FREQ_176400HZ 0x0c +# define SP_FS_FREQ_192000HZ 0x0e + +/* + * Micellaneous Control Block + */ + +/* CHIP Control Register */ +#define SP_CHIP_CTRL_REG 0xe3 +#define SP_MAN_HDMI5V_DET BIT(3) +#define SP_PLLLOCK_CKDT_EN BIT(2) +#define SP_ANALOG_CKDT_EN BIT(1) +#define SP_DIGITAL_CKDT_EN BIT(0) + +/* Packet Receiving Status Register */ +#define SP_PACKET_RECEIVING_STATUS_REG 0xf3 +#define SP_AVI_RCVD BIT(5) +#define SP_VSI_RCVD BIT(1) + +/***************************************************************/ +/* Register definitions for RX_P1 */ +/***************************************************************/ + +/* HDCP BCAPS Shadow Register */ +#define SP_HDCP_BCAPS_SHADOW_REG 0x2a +#define SP_BCAPS_REPEATER BIT(5) + +/* HDCP Status Register */ +#define SP_RX_HDCP_STATUS_REG 0x3f +#define SP_AUTH_EN BIT(4) + +/* + * InfoFrame and Control Packet Registers + */ + +/* AVI InfoFrame packet checksum */ +#define SP_AVI_INFOFRAME_CHECKSUM 0xa3 + +/* AVI InfoFrame Registers */ +#define SP_AVI_INFOFRAME_DATA_BASE 0xa4 + +#define SP_AVI_COLOR_F_MASK 0x60 +#define SP_AVI_COLOR_F_SHIFT 5 + +/* Audio InfoFrame Registers */ +#define SP_AUD_INFOFRAME_DATA_BASE 0xc4 +#define SP_AUD_INFOFRAME_LAYOUT_MASK 0x0f + +/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */ +#define SP_MPEG_VS_INFOFRAME_TYPE_REG 0xe0 + +/* MPEG/HDMI Vendor Specific InfoFrame Packet length */ +#define SP_MPEG_VS_INFOFRAME_LEN_REG 0xe2 + +/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */ +#define SP_MPEG_VS_INFOFRAME_VER_REG 0xe1 + +/* MPEG/HDMI Vendor Specific InfoFrame Packet content */ +#define SP_MPEG_VS_INFOFRAME_DATA_BASE 0xe4 + +/* General Control Packet Register */ +#define SP_GENERAL_CTRL_PACKET_REG 0x9f +#define SP_CLEAR_AVMUTE BIT(4) +#define SP_SET_AVMUTE BIT(0) + +/***************************************************************/ +/* Register definitions for TX_P1 */ +/***************************************************************/ + +/* DP TX Link Training Control Register */ +#define SP_DP_TX_LT_CTRL0_REG 0x30 + +/* PD 1.2 Lint Training 80bit Pattern Register */ +#define SP_DP_LT_80BIT_PATTERN0_REG 0x80 +#define SP_DP_LT_80BIT_PATTERN_REG_NUM 10 + +/* Audio Interface Control Register 0 */ +#define SP_AUD_INTERFACE_CTRL0_REG 0x5f +#define SP_AUD_INTERFACE_DISABLE 0x80 + +/* Audio Interface Control Register 2 */ +#define SP_AUD_INTERFACE_CTRL2_REG 0x60 +#define SP_M_AUD_ADJUST_ST 0x04 + +/* Audio Interface Control Register 3 */ +#define SP_AUD_INTERFACE_CTRL3_REG 0x62 + +/* Audio Interface Control Register 4 */ +#define SP_AUD_INTERFACE_CTRL4_REG 0x67 + +/* Audio Interface Control Register 5 */ +#define SP_AUD_INTERFACE_CTRL5_REG 0x68 + +/* Audio Interface Control Register 6 */ +#define SP_AUD_INTERFACE_CTRL6_REG 0x69 + +/* Firmware Version Register */ +#define SP_FW_VER_REG 0xb7 + +#endif diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c new file mode 100644 index 000000000000..fe40bab21530 --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2016, Analogix Semiconductor. + * + * Based on anx7808 driver obtained from chromeos with copyright: + * Copyright(c) 2013, Google Inc. + */ +#include <linux/regmap.h> + +#include <drm/drm.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_print.h> + +#include "analogix-i2c-dptx.h" + +#define AUX_WAIT_TIMEOUT_MS 15 +#define AUX_CH_BUFFER_SIZE 16 + +static int anx_i2c_dp_clear_bits(struct regmap *map, u8 reg, u8 mask) +{ + return regmap_update_bits(map, reg, mask, 0); +} + +static bool anx_dp_aux_op_finished(struct regmap *map_dptx) +{ + unsigned int value; + int err; + + err = regmap_read(map_dptx, SP_DP_AUX_CH_CTRL2_REG, &value); + if (err < 0) + return false; + + return (value & SP_AUX_EN) == 0; +} + +static int anx_dp_aux_wait(struct regmap *map_dptx) +{ + unsigned long timeout; + unsigned int status; + int err; + + timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1; + + while (!anx_dp_aux_op_finished(map_dptx)) { + if (time_after(jiffies, timeout)) { + if (!anx_dp_aux_op_finished(map_dptx)) { + DRM_ERROR("Timed out waiting AUX to finish\n"); + return -ETIMEDOUT; + } + + break; + } + + usleep_range(1000, 2000); + } + + /* Read the AUX channel access status */ + err = regmap_read(map_dptx, SP_AUX_CH_STATUS_REG, &status); + if (err < 0) { + DRM_ERROR("Failed to read from AUX channel: %d\n", err); + return err; + } + + if (status & SP_AUX_STATUS) { + DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n", + status); + return -ETIMEDOUT; + } + + return 0; +} + +static int anx_dp_aux_address(struct regmap *map_dptx, unsigned int addr) +{ + int err; + + err = regmap_write(map_dptx, SP_AUX_ADDR_7_0_REG, addr & 0xff); + if (err) + return err; + + err = regmap_write(map_dptx, SP_AUX_ADDR_15_8_REG, + (addr & 0xff00) >> 8); + if (err) + return err; + + /* + * DP AUX CH Address Register #2, only update bits[3:0] + * [7:4] RESERVED + * [3:0] AUX_ADDR[19:16], Register control AUX CH address. + */ + err = regmap_update_bits(map_dptx, SP_AUX_ADDR_19_16_REG, + SP_AUX_ADDR_19_16_MASK, + (addr & 0xf0000) >> 16); + + if (err) + return err; + + return 0; +} + +ssize_t anx_dp_aux_transfer(struct regmap *map_dptx, + struct drm_dp_aux_msg *msg) +{ + u8 ctrl1 = msg->request; + u8 ctrl2 = SP_AUX_EN; + u8 *buffer = msg->buffer; + int err; + + /* The DP AUX transmit and receive buffer has 16 bytes. */ + if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE)) + return -E2BIG; + + /* Zero-sized messages specify address-only transactions. */ + if (msg->size < 1) + ctrl2 |= SP_ADDR_ONLY; + else /* For non-zero-sized set the length field. */ + ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT; + + if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) { + /* When WRITE | MOT write values to data buffer */ + err = regmap_bulk_write(map_dptx, + SP_DP_BUF_DATA0_REG, buffer, + msg->size); + if (err) + return err; + } + + /* Write address and request */ + err = anx_dp_aux_address(map_dptx, msg->address); + if (err) + return err; + + err = regmap_write(map_dptx, SP_DP_AUX_CH_CTRL1_REG, ctrl1); + if (err) + return err; + + /* Start transaction */ + err = regmap_update_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG, + SP_ADDR_ONLY | SP_AUX_EN, ctrl2); + if (err) + return err; + + err = anx_dp_aux_wait(map_dptx); + if (err) + return err; + + msg->reply = DP_AUX_I2C_REPLY_ACK; + + if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) { + /* Read values from data buffer */ + err = regmap_bulk_read(map_dptx, + SP_DP_BUF_DATA0_REG, buffer, + msg->size); + if (err) + return err; + } + + err = anx_i2c_dp_clear_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG, + SP_ADDR_ONLY); + if (err) + return err; + + return msg->size; +} +EXPORT_SYMBOL_GPL(anx_dp_aux_transfer); diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h new file mode 100644 index 000000000000..663c4bea6e70 --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h @@ -0,0 +1,256 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2016, Analogix Semiconductor. + * + * Based on anx7808 driver obtained from chromeos with copyright: + * Copyright(c) 2013, Google Inc. + */ +#ifndef _ANALOGIX_I2C_DPTX_H_ +#define _ANALOGIX_I2C_DPTX_H_ + +/***************************************************************/ +/* Register definitions for TX_P0 */ +/***************************************************************/ + +/* HDCP Status Register */ +#define SP_TX_HDCP_STATUS_REG 0x00 +#define SP_AUTH_FAIL BIT(5) +#define SP_AUTHEN_PASS BIT(1) + +/* HDCP Control Register 0 */ +#define SP_HDCP_CTRL0_REG 0x01 +#define SP_RX_REPEATER BIT(6) +#define SP_RE_AUTH BIT(5) +#define SP_SW_AUTH_OK BIT(4) +#define SP_HARD_AUTH_EN BIT(3) +#define SP_HDCP_ENC_EN BIT(2) +#define SP_BKSV_SRM_PASS BIT(1) +#define SP_KSVLIST_VLD BIT(0) +/* HDCP Function Enabled */ +#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3)) + +/* HDCP Receiver BSTATUS Register 0 */ +#define SP_HDCP_RX_BSTATUS0_REG 0x1b +/* HDCP Receiver BSTATUS Register 1 */ +#define SP_HDCP_RX_BSTATUS1_REG 0x1c + +/* HDCP Embedded "Blue Screen" Content Registers */ +#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c +#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d +#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e + +/* HDCP Wait R0 Timing Register */ +#define SP_HDCP_WAIT_R0_TIME_REG 0x40 + +/* HDCP Link Integrity Check Timer Register */ +#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41 + +/* HDCP Repeater Ready Wait Timer Register */ +#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42 + +/* HDCP Auto Timer Register */ +#define SP_HDCP_AUTO_TIMER_REG 0x51 + +/* HDCP Key Status Register */ +#define SP_HDCP_KEY_STATUS_REG 0x5e + +/* HDCP Key Command Register */ +#define SP_HDCP_KEY_COMMAND_REG 0x5f +#define SP_DISABLE_SYNC_HDCP BIT(2) + +/* OTP Memory Key Protection Registers */ +#define SP_OTP_KEY_PROTECT1_REG 0x60 +#define SP_OTP_KEY_PROTECT2_REG 0x61 +#define SP_OTP_KEY_PROTECT3_REG 0x62 +#define SP_OTP_PSW1 0xa2 +#define SP_OTP_PSW2 0x7e +#define SP_OTP_PSW3 0xc6 + +/* DP System Control Registers */ +#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1) +/* Bits for DP System Control Register 2 */ +#define SP_CHA_STA BIT(2) +/* Bits for DP System Control Register 3 */ +#define SP_HPD_STATUS BIT(6) +#define SP_HPD_FORCE BIT(5) +#define SP_HPD_CTRL BIT(4) +#define SP_STRM_VALID BIT(2) +#define SP_STRM_FORCE BIT(1) +#define SP_STRM_CTRL BIT(0) +/* Bits for DP System Control Register 4 */ +#define SP_ENHANCED_MODE BIT(3) + +/* DP Video Control Register */ +#define SP_DP_VIDEO_CTRL_REG 0x84 +#define SP_COLOR_F_MASK 0x06 +#define SP_COLOR_F_SHIFT 1 +#define SP_BPC_MASK 0xe0 +#define SP_BPC_SHIFT 5 +# define SP_BPC_6BITS 0x00 +# define SP_BPC_8BITS 0x01 +# define SP_BPC_10BITS 0x02 +# define SP_BPC_12BITS 0x03 + +/* DP Audio Control Register */ +#define SP_DP_AUDIO_CTRL_REG 0x87 +#define SP_AUD_EN BIT(0) + +/* 10us Pulse Generate Timer Registers */ +#define SP_I2C_GEN_10US_TIMER0_REG 0x88 +#define SP_I2C_GEN_10US_TIMER1_REG 0x89 + +/* Packet Send Control Register */ +#define SP_PACKET_SEND_CTRL_REG 0x90 +#define SP_AUD_IF_UP BIT(7) +#define SP_AVI_IF_UD BIT(6) +#define SP_MPEG_IF_UD BIT(5) +#define SP_SPD_IF_UD BIT(4) +#define SP_AUD_IF_EN BIT(3) +#define SP_AVI_IF_EN BIT(2) +#define SP_MPEG_IF_EN BIT(1) +#define SP_SPD_IF_EN BIT(0) + +/* DP HDCP Control Register */ +#define SP_DP_HDCP_CTRL_REG 0x92 +#define SP_AUTO_EN BIT(7) +#define SP_AUTO_START BIT(5) +#define SP_LINK_POLLING BIT(1) + +/* DP Main Link Bandwidth Setting Register */ +#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0 +#define SP_LINK_BW_SET_MASK 0x1f +#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5) + +/* DP Lane Count Setting Register */ +#define SP_DP_LANE_COUNT_SET_REG 0xa1 + +/* DP Training Pattern Set Register */ +#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2 + +/* DP Lane 0 Link Training Control Register */ +#define SP_DP_LANE0_LT_CTRL_REG 0xa3 +#define SP_TX_SW_SET_MASK 0x1b +#define SP_MAX_PRE_REACH BIT(5) +#define SP_MAX_DRIVE_REACH BIT(4) +#define SP_PRE_EMP_LEVEL1 BIT(3) +#define SP_DRVIE_CURRENT_LEVEL1 BIT(0) + +/* DP Link Training Control Register */ +#define SP_DP_LT_CTRL_REG 0xa8 +#define SP_DP_LT_INPROGRESS 0x80 +#define SP_LT_ERROR_TYPE_MASK 0x70 +# define SP_LT_NO_ERROR 0x00 +# define SP_LT_AUX_WRITE_ERROR 0x01 +# define SP_LT_MAX_DRIVE_REACHED 0x02 +# define SP_LT_WRONG_LANE_COUNT_SET 0x03 +# define SP_LT_LOOP_SAME_5_TIME 0x04 +# define SP_LT_CR_FAIL_IN_EQ 0x05 +# define SP_LT_EQ_LOOP_5_TIME 0x06 +#define SP_LT_EN BIT(0) + +/* DP CEP Training Control Registers */ +#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9 +#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa + +/* DP Debug Register 1 */ +#define SP_DP_DEBUG1_REG 0xb0 +#define SP_DEBUG_PLL_LOCK BIT(4) +#define SP_POLLING_EN BIT(1) + +/* DP Polling Control Register */ +#define SP_DP_POLLING_CTRL_REG 0xb4 +#define SP_AUTO_POLLING_DISABLE BIT(0) + +/* DP Link Debug Control Register */ +#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8 +#define SP_M_VID_DEBUG BIT(5) +#define SP_NEW_PRBS7 BIT(4) +#define SP_INSERT_ER BIT(1) +#define SP_PRBS31_EN BIT(0) + +/* AUX Misc control Register */ +#define SP_AUX_MISC_CTRL_REG 0xbf + +/* DP PLL control Register */ +#define SP_DP_PLL_CTRL_REG 0xc7 +#define SP_PLL_RST BIT(6) + +/* DP Analog Power Down Register */ +#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8 +#define SP_CH0_PD BIT(0) + +/* DP Misc Control Register */ +#define SP_DP_MISC_CTRL_REG 0xcd +#define SP_EQ_TRAINING_LOOP BIT(6) + +/* DP Extra I2C Device Address Register */ +#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce +#define SP_I2C_STRETCH_DISABLE BIT(7) + +#define SP_I2C_EXTRA_ADDR 0x50 + +/* DP Downspread Control Register 1 */ +#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0 + +/* DP M Value Calculation Control Register */ +#define SP_DP_M_CALCULATION_CTRL_REG 0xd9 +#define SP_M_GEN_CLK_SEL BIT(0) + +/* AUX Channel Access Status Register */ +#define SP_AUX_CH_STATUS_REG 0xe0 +#define SP_AUX_STATUS 0x0f + +/* AUX Channel DEFER Control Register */ +#define SP_AUX_DEFER_CTRL_REG 0xe2 +#define SP_DEFER_CTRL_EN BIT(7) + +/* DP Buffer Data Count Register */ +#define SP_BUF_DATA_COUNT_REG 0xe4 +#define SP_BUF_DATA_COUNT_MASK 0x1f +#define SP_BUF_CLR BIT(7) + +/* DP AUX Channel Control Register 1 */ +#define SP_DP_AUX_CH_CTRL1_REG 0xe5 +#define SP_AUX_TX_COMM_MASK 0x0f +#define SP_AUX_LENGTH_MASK 0xf0 +#define SP_AUX_LENGTH_SHIFT 4 + +/* DP AUX CH Address Register 0 */ +#define SP_AUX_ADDR_7_0_REG 0xe6 + +/* DP AUX CH Address Register 1 */ +#define SP_AUX_ADDR_15_8_REG 0xe7 + +/* DP AUX CH Address Register 2 */ +#define SP_AUX_ADDR_19_16_REG 0xe8 +#define SP_AUX_ADDR_19_16_MASK 0x0f + +/* DP AUX Channel Control Register 2 */ +#define SP_DP_AUX_CH_CTRL2_REG 0xe9 +#define SP_AUX_SEL_RXCM BIT(6) +#define SP_AUX_CHSEL BIT(3) +#define SP_AUX_PN_INV BIT(2) +#define SP_ADDR_ONLY BIT(1) +#define SP_AUX_EN BIT(0) + +/* DP Video Stream Control InfoFrame Register */ +#define SP_DP_3D_VSC_CTRL_REG 0xea +#define SP_INFO_FRAME_VSC_EN BIT(0) + +/* DP Video Stream Data Byte 1 Register */ +#define SP_DP_VSC_DB1_REG 0xeb + +/* DP AUX Channel Control Register 3 */ +#define SP_DP_AUX_CH_CTRL3_REG 0xec +#define SP_WAIT_COUNTER_7_0_MASK 0xff + +/* DP AUX Channel Control Register 4 */ +#define SP_DP_AUX_CH_CTRL4_REG 0xed + +/* DP AUX Buffer Data Registers */ +#define SP_DP_BUF_DATA0_REG 0xf0 + +ssize_t anx_dp_aux_transfer(struct regmap *map_dptx, + struct drm_dp_aux_msg *msg); + +#endif diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h new file mode 100644 index 000000000000..3c843497d835 --- /dev/null +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h @@ -0,0 +1,234 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. + */ +#ifndef _ANALOGIX_I2C_TXCOMMON_H_ +#define _ANALOGIX_I2C_TXCOMMON_H_ + +/***************************************************************/ +/* Register definitions for TX_P2 */ +/***************************************************************/ + +/* + * Core Register Definitions + */ + +/* Device ID Low Byte Register */ +#define SP_DEVICE_IDL_REG 0x02 + +/* Device ID High Byte Register */ +#define SP_DEVICE_IDH_REG 0x03 + +/* Device version register */ +#define SP_DEVICE_VERSION_REG 0x04 + +/* Power Down Control Register */ +#define SP_POWERDOWN_CTRL_REG 0x05 +#define SP_REGISTER_PD BIT(7) +#define SP_HDCP_PD BIT(5) +#define SP_AUDIO_PD BIT(4) +#define SP_VIDEO_PD BIT(3) +#define SP_LINK_PD BIT(2) +#define SP_TOTAL_PD BIT(1) + +/* Reset Control Register 1 */ +#define SP_RESET_CTRL1_REG 0x06 +#define SP_MISC_RST BIT(7) +#define SP_VIDCAP_RST BIT(6) +#define SP_VIDFIF_RST BIT(5) +#define SP_AUDFIF_RST BIT(4) +#define SP_AUDCAP_RST BIT(3) +#define SP_HDCP_RST BIT(2) +#define SP_SW_RST BIT(1) +#define SP_HW_RST BIT(0) + +/* Reset Control Register 2 */ +#define SP_RESET_CTRL2_REG 0x07 +#define SP_AUX_RST BIT(2) +#define SP_SERDES_FIFO_RST BIT(1) +#define SP_I2C_REG_RST BIT(0) + +/* Video Control Register 1 */ +#define SP_VID_CTRL1_REG 0x08 +#define SP_VIDEO_EN BIT(7) +#define SP_VIDEO_MUTE BIT(2) +#define SP_DE_GEN BIT(1) +#define SP_DEMUX BIT(0) + +/* Video Control Register 2 */ +#define SP_VID_CTRL2_REG 0x09 +#define SP_IN_COLOR_F_MASK 0x03 +#define SP_IN_YC_BIT_SEL BIT(2) +#define SP_IN_BPC_MASK 0x70 +#define SP_IN_BPC_SHIFT 4 +# define SP_IN_BPC_12BIT 0x03 +# define SP_IN_BPC_10BIT 0x02 +# define SP_IN_BPC_8BIT 0x01 +# define SP_IN_BPC_6BIT 0x00 +#define SP_IN_D_RANGE BIT(7) + +/* Video Control Register 3 */ +#define SP_VID_CTRL3_REG 0x0a +#define SP_HPD_OUT BIT(6) + +/* Video Control Register 5 */ +#define SP_VID_CTRL5_REG 0x0c +#define SP_CSC_STD_SEL BIT(7) +#define SP_XVYCC_RNG_LMT BIT(6) +#define SP_RANGE_Y2R BIT(5) +#define SP_CSPACE_Y2R BIT(4) +#define SP_RGB_RNG_LMT BIT(3) +#define SP_Y_RNG_LMT BIT(2) +#define SP_RANGE_R2Y BIT(1) +#define SP_CSPACE_R2Y BIT(0) + +/* Video Control Register 6 */ +#define SP_VID_CTRL6_REG 0x0d +#define SP_TEST_PATTERN_EN BIT(7) +#define SP_VIDEO_PROCESS_EN BIT(6) +#define SP_VID_US_MODE BIT(3) +#define SP_VID_DS_MODE BIT(2) +#define SP_UP_SAMPLE BIT(1) +#define SP_DOWN_SAMPLE BIT(0) + +/* Video Control Register 8 */ +#define SP_VID_CTRL8_REG 0x0f +#define SP_VID_VRES_TH BIT(0) + +/* Total Line Status Low Byte Register */ +#define SP_TOTAL_LINE_STAL_REG 0x24 + +/* Total Line Status High Byte Register */ +#define SP_TOTAL_LINE_STAH_REG 0x25 + +/* Active Line Status Low Byte Register */ +#define SP_ACT_LINE_STAL_REG 0x26 + +/* Active Line Status High Byte Register */ +#define SP_ACT_LINE_STAH_REG 0x27 + +/* Vertical Front Porch Status Register */ +#define SP_V_F_PORCH_STA_REG 0x28 + +/* Vertical SYNC Width Status Register */ +#define SP_V_SYNC_STA_REG 0x29 + +/* Vertical Back Porch Status Register */ +#define SP_V_B_PORCH_STA_REG 0x2a + +/* Total Pixel Status Low Byte Register */ +#define SP_TOTAL_PIXEL_STAL_REG 0x2b + +/* Total Pixel Status High Byte Register */ +#define SP_TOTAL_PIXEL_STAH_REG 0x2c + +/* Active Pixel Status Low Byte Register */ +#define SP_ACT_PIXEL_STAL_REG 0x2d + +/* Active Pixel Status High Byte Register */ +#define SP_ACT_PIXEL_STAH_REG 0x2e + +/* Horizontal Front Porch Status Low Byte Register */ +#define SP_H_F_PORCH_STAL_REG 0x2f + +/* Horizontal Front Porch Statys High Byte Register */ +#define SP_H_F_PORCH_STAH_REG 0x30 + +/* Horizontal SYNC Width Status Low Byte Register */ +#define SP_H_SYNC_STAL_REG 0x31 + +/* Horizontal SYNC Width Status High Byte Register */ +#define SP_H_SYNC_STAH_REG 0x32 + +/* Horizontal Back Porch Status Low Byte Register */ +#define SP_H_B_PORCH_STAL_REG 0x33 + +/* Horizontal Back Porch Status High Byte Register */ +#define SP_H_B_PORCH_STAH_REG 0x34 + +/* InfoFrame AVI Packet DB1 Register */ +#define SP_INFOFRAME_AVI_DB1_REG 0x70 + +/* Bit Control Specific Register */ +#define SP_BIT_CTRL_SPECIFIC_REG 0x80 +#define SP_BIT_CTRL_SELECT_SHIFT 1 +#define SP_ENABLE_BIT_CTRL BIT(0) + +/* InfoFrame Audio Packet DB1 Register */ +#define SP_INFOFRAME_AUD_DB1_REG 0x83 + +/* InfoFrame MPEG Packet DB1 Register */ +#define SP_INFOFRAME_MPEG_DB1_REG 0xb0 + +/* Audio Channel Status Registers */ +#define SP_AUD_CH_STATUS_BASE 0xd0 + +/* Audio Channel Num Register 5 */ +#define SP_I2S_CHANNEL_NUM_MASK 0xe0 +# define SP_I2S_CH_NUM_1 (0x00 << 5) +# define SP_I2S_CH_NUM_2 (0x01 << 5) +# define SP_I2S_CH_NUM_3 (0x02 << 5) +# define SP_I2S_CH_NUM_4 (0x03 << 5) +# define SP_I2S_CH_NUM_5 (0x04 << 5) +# define SP_I2S_CH_NUM_6 (0x05 << 5) +# define SP_I2S_CH_NUM_7 (0x06 << 5) +# define SP_I2S_CH_NUM_8 (0x07 << 5) +#define SP_EXT_VUCP BIT(2) +#define SP_VBIT BIT(1) +#define SP_AUDIO_LAYOUT BIT(0) + +/* Analog Debug Register 1 */ +#define SP_ANALOG_DEBUG1_REG 0xdc + +/* Analog Debug Register 2 */ +#define SP_ANALOG_DEBUG2_REG 0xdd +#define SP_FORCE_SW_OFF_BYPASS 0x20 +#define SP_XTAL_FRQ 0x1c +# define SP_XTAL_FRQ_19M2 (0x00 << 2) +# define SP_XTAL_FRQ_24M (0x01 << 2) +# define SP_XTAL_FRQ_25M (0x02 << 2) +# define SP_XTAL_FRQ_26M (0x03 << 2) +# define SP_XTAL_FRQ_27M (0x04 << 2) +# define SP_XTAL_FRQ_38M4 (0x05 << 2) +# define SP_XTAL_FRQ_52M (0x06 << 2) +#define SP_POWERON_TIME_1P5MS 0x03 + +/* Analog Control 0 Register */ +#define SP_ANALOG_CTRL0_REG 0xe1 + +/* Common Interrupt Status Register 1 */ +#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1) +#define SP_PLL_LOCK_CHG 0x40 + +/* Common Interrupt Status Register 2 */ +#define SP_COMMON_INT_STATUS2 0xf2 +#define SP_HDCP_AUTH_CHG BIT(1) +#define SP_HDCP_AUTH_DONE BIT(0) + +#define SP_HDCP_LINK_CHECK_FAIL BIT(0) + +/* Common Interrupt Status Register 4 */ +#define SP_COMMON_INT_STATUS4_REG 0xf4 +#define SP_HPD_IRQ BIT(6) +#define SP_HPD_ESYNC_ERR BIT(4) +#define SP_HPD_CHG BIT(2) +#define SP_HPD_LOST BIT(1) +#define SP_HPD_PLUG BIT(0) + +/* DP Interrupt Status Register */ +#define SP_DP_INT_STATUS1_REG 0xf7 +#define SP_TRAINING_FINISH BIT(5) +#define SP_POLLING_ERR BIT(4) + +/* Common Interrupt Mask Register */ +#define SP_COMMON_INT_MASK_BASE (0xf8 - 1) + +#define SP_COMMON_INT_MASK4_REG 0xfb + +/* DP Interrupts Mask Register */ +#define SP_DP_INT_MASK1_REG 0xfe + +/* Interrupt Control Register */ +#define SP_INT_CTRL_REG 0xff + +#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */ diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index bb411fe52ae8..6effe532f820 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -1111,7 +1111,7 @@ static int analogix_dp_get_modes(struct drm_connector *connector) int ret, num_modes = 0; if (dp->plat_data->panel) { - num_modes += drm_panel_get_modes(dp->plat_data->panel); + num_modes += drm_panel_get_modes(dp->plat_data->panel, connector); } else { ret = analogix_dp_prepare_panel(dp, true, false); if (ret) { diff --git a/drivers/gpu/drm/bridge/cdns-dsi.c b/drivers/gpu/drm/bridge/cdns-dsi.c index 3a5bd4e7fd1e..b7c97f060241 100644 --- a/drivers/gpu/drm/bridge/cdns-dsi.c +++ b/drivers/gpu/drm/bridge/cdns-dsi.c @@ -512,7 +512,7 @@ static int cdns_dsi_mode2cfg(struct cdns_dsi *dsi, struct cdns_dsi_output *output = &dsi->output; unsigned int tmp; bool sync_pulse = false; - int bpp, nlanes; + int bpp; memset(dsi_cfg, 0, sizeof(*dsi_cfg)); @@ -520,7 +520,6 @@ static int cdns_dsi_mode2cfg(struct cdns_dsi *dsi, sync_pulse = true; bpp = mipi_dsi_pixel_format_to_bpp(output->dev->format); - nlanes = output->dev->lanes; if (mode_valid_check) tmp = mode->htotal - @@ -785,13 +784,12 @@ static void cdns_dsi_bridge_enable(struct drm_bridge *bridge) unsigned long tx_byte_period; struct cdns_dsi_cfg dsi_cfg; u32 tmp, reg_wakeup, div; - int bpp, nlanes; + int nlanes; if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0)) return; mode = &bridge->encoder->crtc->state->adjusted_mode; - bpp = mipi_dsi_pixel_format_to_bpp(output->dev->format); nlanes = output->dev->lanes; WARN_ON_ONCE(cdns_dsi_check_conf(dsi, mode, &dsi_cfg, false)); diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c new file mode 100644 index 000000000000..5f04cc11227e --- /dev/null +++ b/drivers/gpu/drm/bridge/lvds-codec.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019 Renesas Electronics Corporation + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> + +#include <drm/drm_bridge.h> +#include <drm/drm_panel.h> + +struct lvds_codec { + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + struct gpio_desc *powerdown_gpio; + u32 connector_type; +}; + +static int lvds_codec_attach(struct drm_bridge *bridge) +{ + struct lvds_codec *lvds_codec = container_of(bridge, + struct lvds_codec, bridge); + + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, + bridge); +} + +static void lvds_codec_enable(struct drm_bridge *bridge) +{ + struct lvds_codec *lvds_codec = container_of(bridge, + struct lvds_codec, bridge); + + if (lvds_codec->powerdown_gpio) + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); +} + +static void lvds_codec_disable(struct drm_bridge *bridge) +{ + struct lvds_codec *lvds_codec = container_of(bridge, + struct lvds_codec, bridge); + + if (lvds_codec->powerdown_gpio) + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); +} + +static struct drm_bridge_funcs funcs = { + .attach = lvds_codec_attach, + .enable = lvds_codec_enable, + .disable = lvds_codec_disable, +}; + +static int lvds_codec_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *panel_node; + struct drm_panel *panel; + struct lvds_codec *lvds_codec; + + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); + if (!lvds_codec) + return -ENOMEM; + + lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev); + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(lvds_codec->powerdown_gpio)) { + int err = PTR_ERR(lvds_codec->powerdown_gpio); + + if (err != -EPROBE_DEFER) + dev_err(dev, "powerdown GPIO failure: %d\n", err); + return err; + } + + /* Locate the panel DT node. */ + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); + if (!panel_node) { + dev_dbg(dev, "panel DT node not found\n"); + return -ENXIO; + } + + panel = of_drm_find_panel(panel_node); + of_node_put(panel_node); + if (IS_ERR(panel)) { + dev_dbg(dev, "panel not found, deferring probe\n"); + return PTR_ERR(panel); + } + + lvds_codec->panel_bridge = + devm_drm_panel_bridge_add_typed(dev, panel, + lvds_codec->connector_type); + if (IS_ERR(lvds_codec->panel_bridge)) + return PTR_ERR(lvds_codec->panel_bridge); + + /* + * The panel_bridge bridge is attached to the panel's of_node, + * but we need a bridge attached to our of_node for our user + * to look up. + */ + lvds_codec->bridge.of_node = dev->of_node; + lvds_codec->bridge.funcs = &funcs; + drm_bridge_add(&lvds_codec->bridge); + + platform_set_drvdata(pdev, lvds_codec); + + return 0; +} + +static int lvds_codec_remove(struct platform_device *pdev) +{ + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); + + drm_bridge_remove(&lvds_codec->bridge); + + return 0; +} + +static const struct of_device_id lvds_codec_match[] = { + { + .compatible = "lvds-decoder", + .data = (void *)DRM_MODE_CONNECTOR_DPI, + }, + { + .compatible = "lvds-encoder", + .data = (void *)DRM_MODE_CONNECTOR_LVDS, + }, + { + .compatible = "thine,thc63lvdm83d", + .data = (void *)DRM_MODE_CONNECTOR_LVDS, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, lvds_codec_match); + +static struct platform_driver lvds_codec_driver = { + .probe = lvds_codec_probe, + .remove = lvds_codec_remove, + .driver = { + .name = "lvds-codec", + .of_match_table = lvds_codec_match, + }, +}; +module_platform_driver(lvds_codec_driver); + +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("LVDS encoders and decoders"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c deleted file mode 100644 index e2132a8d5106..000000000000 --- a/drivers/gpu/drm/bridge/lvds-encoder.c +++ /dev/null @@ -1,155 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> - */ - -#include <linux/gpio/consumer.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_graph.h> -#include <linux/platform_device.h> - -#include <drm/drm_bridge.h> -#include <drm/drm_panel.h> - -struct lvds_encoder { - struct drm_bridge bridge; - struct drm_bridge *panel_bridge; - struct gpio_desc *powerdown_gpio; -}; - -static int lvds_encoder_attach(struct drm_bridge *bridge) -{ - struct lvds_encoder *lvds_encoder = container_of(bridge, - struct lvds_encoder, - bridge); - - return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge, - bridge); -} - -static void lvds_encoder_enable(struct drm_bridge *bridge) -{ - struct lvds_encoder *lvds_encoder = container_of(bridge, - struct lvds_encoder, - bridge); - - if (lvds_encoder->powerdown_gpio) - gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0); -} - -static void lvds_encoder_disable(struct drm_bridge *bridge) -{ - struct lvds_encoder *lvds_encoder = container_of(bridge, - struct lvds_encoder, - bridge); - - if (lvds_encoder->powerdown_gpio) - gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1); -} - -static struct drm_bridge_funcs funcs = { - .attach = lvds_encoder_attach, - .enable = lvds_encoder_enable, - .disable = lvds_encoder_disable, -}; - -static int lvds_encoder_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *port; - struct device_node *endpoint; - struct device_node *panel_node; - struct drm_panel *panel; - struct lvds_encoder *lvds_encoder; - - lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL); - if (!lvds_encoder) - return -ENOMEM; - - lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", - GPIOD_OUT_HIGH); - if (IS_ERR(lvds_encoder->powerdown_gpio)) { - int err = PTR_ERR(lvds_encoder->powerdown_gpio); - - if (err != -EPROBE_DEFER) - dev_err(dev, "powerdown GPIO failure: %d\n", err); - return err; - } - - /* Locate the panel DT node. */ - port = of_graph_get_port_by_id(dev->of_node, 1); - if (!port) { - dev_dbg(dev, "port 1 not found\n"); - return -ENXIO; - } - - endpoint = of_get_child_by_name(port, "endpoint"); - of_node_put(port); - if (!endpoint) { - dev_dbg(dev, "no endpoint for port 1\n"); - return -ENXIO; - } - - panel_node = of_graph_get_remote_port_parent(endpoint); - of_node_put(endpoint); - if (!panel_node) { - dev_dbg(dev, "no remote endpoint for port 1\n"); - return -ENXIO; - } - - panel = of_drm_find_panel(panel_node); - of_node_put(panel_node); - if (IS_ERR(panel)) { - dev_dbg(dev, "panel not found, deferring probe\n"); - return PTR_ERR(panel); - } - - lvds_encoder->panel_bridge = - devm_drm_panel_bridge_add_typed(dev, panel, - DRM_MODE_CONNECTOR_LVDS); - if (IS_ERR(lvds_encoder->panel_bridge)) - return PTR_ERR(lvds_encoder->panel_bridge); - - /* The panel_bridge bridge is attached to the panel's of_node, - * but we need a bridge attached to our of_node for our user - * to look up. - */ - lvds_encoder->bridge.of_node = dev->of_node; - lvds_encoder->bridge.funcs = &funcs; - drm_bridge_add(&lvds_encoder->bridge); - - platform_set_drvdata(pdev, lvds_encoder); - - return 0; -} - -static int lvds_encoder_remove(struct platform_device *pdev) -{ - struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev); - - drm_bridge_remove(&lvds_encoder->bridge); - - return 0; -} - -static const struct of_device_id lvds_encoder_match[] = { - { .compatible = "lvds-encoder" }, - { .compatible = "thine,thc63lvdm83d" }, - {}, -}; -MODULE_DEVICE_TABLE(of, lvds_encoder_match); - -static struct platform_driver lvds_encoder_driver = { - .probe = lvds_encoder_probe, - .remove = lvds_encoder_remove, - .driver = { - .name = "lvds-encoder", - .of_match_table = lvds_encoder_match, - }, -}; -module_platform_driver(lvds_encoder_driver); - -MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); -MODULE_DESCRIPTION("Transparent parallel to LVDS encoder"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c index f4e293e7cf64..f66777e24968 100644 --- a/drivers/gpu/drm/bridge/panel.c +++ b/drivers/gpu/drm/bridge/panel.c @@ -37,7 +37,7 @@ static int panel_bridge_connector_get_modes(struct drm_connector *connector) struct panel_bridge *panel_bridge = drm_connector_to_panel_bridge(connector); - return drm_panel_get_modes(panel_bridge->panel); + return drm_panel_get_modes(panel_bridge->panel, connector); } static const struct drm_connector_helper_funcs @@ -289,3 +289,21 @@ struct drm_bridge *devm_drm_panel_bridge_add_typed(struct device *dev, return bridge; } EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed); + +/** + * drm_panel_bridge_connector - return the connector for the panel bridge + * + * drm_panel_bridge creates the connector. + * This function gives external access to the connector. + * + * Returns: Pointer to drm_connector + */ +struct drm_connector *drm_panel_bridge_connector(struct drm_bridge *bridge) +{ + struct panel_bridge *panel_bridge; + + panel_bridge = drm_bridge_to_panel_bridge(bridge); + + return &panel_bridge->connector; +} +EXPORT_SYMBOL(drm_panel_bridge_connector); diff --git a/drivers/gpu/drm/bridge/parade-ps8622.c b/drivers/gpu/drm/bridge/parade-ps8622.c index b7a72dfdcac3..10c47c008b40 100644 --- a/drivers/gpu/drm/bridge/parade-ps8622.c +++ b/drivers/gpu/drm/bridge/parade-ps8622.c @@ -461,7 +461,7 @@ static int ps8622_get_modes(struct drm_connector *connector) ps8622 = connector_to_ps8622(connector); - return drm_panel_get_modes(ps8622->panel); + return drm_panel_get_modes(ps8622->panel, connector); } static const struct drm_connector_helper_funcs ps8622_connector_helper_funcs = { diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c index 2b7539701b42..dd56996fe9c7 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c @@ -291,7 +291,7 @@ static irqreturn_t snd_dw_hdmi_irq(int irq, void *data) return IRQ_HANDLED; } -static struct snd_pcm_hardware dw_hdmi_hw = { +static const struct snd_pcm_hardware dw_hdmi_hw = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index b6e793bb653c..b18351b6760a 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c @@ -719,7 +719,15 @@ static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi, static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) { + const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops; + struct dw_mipi_dsi_dphy_timing timing; u32 hw_version; + int ret; + + ret = phy_ops->get_timing(dsi->plat_data->priv_data, + dsi->lane_mbps, &timing); + if (ret) + DRM_DEV_ERROR(dsi->dev, "Retrieving phy timings failed\n"); /* * TODO dw drv improvements @@ -732,16 +740,20 @@ static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) hw_version = dsi_read(dsi, DSI_VERSION) & VERSION; if (hw_version >= HWVER_131) { - dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V131(0x40) | - PHY_LP2HS_TIME_V131(0x40)); + dsi_write(dsi, DSI_PHY_TMR_CFG, + PHY_HS2LP_TIME_V131(timing.data_hs2lp) | + PHY_LP2HS_TIME_V131(timing.data_lp2hs)); dsi_write(dsi, DSI_PHY_TMR_RD_CFG, MAX_RD_TIME_V131(10000)); } else { - dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) | - PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000)); + dsi_write(dsi, DSI_PHY_TMR_CFG, + PHY_HS2LP_TIME(timing.data_hs2lp) | + PHY_LP2HS_TIME(timing.data_lp2hs) | + MAX_RD_TIME(10000)); } - dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40) - | PHY_CLKLP2HS_TIME(0x40)); + dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, + PHY_CLKHS2LP_TIME(timing.clk_hs2lp) | + PHY_CLKLP2HS_TIME(timing.clk_lp2hs)); } static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi) @@ -798,9 +810,6 @@ static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge) struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge); const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops; - if (phy_ops->power_off) - phy_ops->power_off(dsi->plat_data->priv_data); - /* * Switch to command mode before panel-bridge post_disable & * panel unprepare. @@ -817,6 +826,9 @@ static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge) */ dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge); + if (phy_ops->power_off) + phy_ops->power_off(dsi->plat_data->priv_data); + if (dsi->slave) { dw_mipi_dsi_disable(dsi->slave); clk_disable_unprepare(dsi->slave->pclk); @@ -883,6 +895,9 @@ static void dw_mipi_dsi_mode_set(struct dw_mipi_dsi *dsi, /* Switch to cmd mode for panel-bridge pre_enable & panel prepare */ dw_mipi_dsi_set_mode(dsi, 0); + + if (phy_ops->power_on) + phy_ops->power_on(dsi->plat_data->priv_data); } static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge, @@ -899,15 +914,11 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge, static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge) { struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge); - const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops; /* Switch to video mode for panel-bridge enable & panel enable */ dw_mipi_dsi_set_mode(dsi, MIPI_DSI_MODE_VIDEO); if (dsi->slave) dw_mipi_dsi_set_mode(dsi->slave, MIPI_DSI_MODE_VIDEO); - - if (phy_ops->power_on) - phy_ops->power_on(dsi->plat_data->priv_data); } static enum drm_mode_status @@ -991,7 +1002,8 @@ __dw_mipi_dsi_probe(struct platform_device *pdev, dsi->dev = dev; dsi->plat_data = plat_data; - if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) { + if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps || + !plat_data->phy_ops->get_timing) { DRM_ERROR("Phy not properly configured\n"); return ERR_PTR(-ENODEV); } diff --git a/drivers/gpu/drm/bridge/tc358764.c b/drivers/gpu/drm/bridge/tc358764.c index db298f550a5a..96207fcfde19 100644 --- a/drivers/gpu/drm/bridge/tc358764.c +++ b/drivers/gpu/drm/bridge/tc358764.c @@ -282,7 +282,7 @@ static int tc358764_get_modes(struct drm_connector *connector) { struct tc358764 *ctx = connector_to_tc358764(connector); - return drm_panel_get_modes(ctx->panel); + return drm_panel_get_modes(ctx->panel, connector); } static const diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 8029478ffebb..3709e5ace724 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1346,7 +1346,7 @@ static int tc_connector_get_modes(struct drm_connector *connector) return 0; } - count = drm_panel_get_modes(tc->panel); + count = drm_panel_get_modes(tc->panel, connector); if (count > 0) return count; diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 43abf01ebd4c..9a2dd986afa5 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -206,7 +206,7 @@ static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector) { struct ti_sn_bridge *pdata = connector_to_ti_sn_bridge(connector); - return drm_panel_get_modes(pdata->panel); + return drm_panel_get_modes(pdata->panel, connector); } static enum drm_mode_status |