diff options
Diffstat (limited to 'drivers/gpu/drm/drm_atomic_helper.c')
| -rw-r--r-- | drivers/gpu/drm/drm_atomic_helper.c | 85 |
1 files changed, 45 insertions, 40 deletions
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 0b16587cdc62..583f47f27b36 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1006,13 +1006,21 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_enables); * drm_atomic_helper_wait_for_fences - wait for fences stashed in plane state * @dev: DRM device * @state: atomic state object with old state structures - * @pre_swap: if true, do an interruptible wait + * @pre_swap: If true, do an interruptible wait, and @state is the new state. + * Otherwise @state is the old state. * * For implicit sync, driver should fish the exclusive fence out from the * incoming fb's and stash it in the drm_plane_state. This is called after * drm_atomic_helper_swap_state() so it uses the current plane state (and * just uses the atomic state to find the changed planes) * + * Note that @pre_swap is needed since the point where we block for fences moves + * around depending upon whether an atomic commit is blocking or + * non-blocking. For async commit all waiting needs to happen after + * drm_atomic_helper_swap_state() is called, but for synchronous commits we want + * to wait **before** we do anything that can't be easily rolled back. That is + * before we call drm_atomic_helper_swap_state(). + * * Returns zero if success or < 0 if dma_fence_wait() fails. */ int drm_atomic_helper_wait_for_fences(struct drm_device *dev, @@ -1147,7 +1155,7 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks); /** * drm_atomic_helper_commit_tail - commit atomic update to hardware - * @state: new modeset state to be committed + * @old_state: atomic state object with old state structures * * This is the default implemenation for the ->atomic_commit_tail() hook of the * &drm_mode_config_helper_funcs vtable. @@ -1158,53 +1166,53 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks); * * For drivers supporting runtime PM the recommended sequence is instead :: * - * drm_atomic_helper_commit_modeset_disables(dev, state); + * drm_atomic_helper_commit_modeset_disables(dev, old_state); * - * drm_atomic_helper_commit_modeset_enables(dev, state); + * drm_atomic_helper_commit_modeset_enables(dev, old_state); * - * drm_atomic_helper_commit_planes(dev, state, + * drm_atomic_helper_commit_planes(dev, old_state, * DRM_PLANE_COMMIT_ACTIVE_ONLY); * * for committing the atomic update to hardware. See the kerneldoc entries for * these three functions for more details. */ -void drm_atomic_helper_commit_tail(struct drm_atomic_state *state) +void drm_atomic_helper_commit_tail(struct drm_atomic_state *old_state) { - struct drm_device *dev = state->dev; + struct drm_device *dev = old_state->dev; - drm_atomic_helper_commit_modeset_disables(dev, state); + drm_atomic_helper_commit_modeset_disables(dev, old_state); - drm_atomic_helper_commit_planes(dev, state, 0); + drm_atomic_helper_commit_planes(dev, old_state, 0); - drm_atomic_helper_commit_modeset_enables(dev, state); + drm_atomic_helper_commit_modeset_enables(dev, old_state); - drm_atomic_helper_commit_hw_done(state); + drm_atomic_helper_commit_hw_done(old_state); - drm_atomic_helper_wait_for_vblanks(dev, state); + drm_atomic_helper_wait_for_vblanks(dev, old_state); - drm_atomic_helper_cleanup_planes(dev, state); + drm_atomic_helper_cleanup_planes(dev, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_tail); -static void commit_tail(struct drm_atomic_state *state) +static void commit_tail(struct drm_atomic_state *old_state) { - struct drm_device *dev = state->dev; + struct drm_device *dev = old_state->dev; struct drm_mode_config_helper_funcs *funcs; funcs = dev->mode_config.helper_private; - drm_atomic_helper_wait_for_fences(dev, state, false); + drm_atomic_helper_wait_for_fences(dev, old_state, false); - drm_atomic_helper_wait_for_dependencies(state); + drm_atomic_helper_wait_for_dependencies(old_state); if (funcs && funcs->atomic_commit_tail) - funcs->atomic_commit_tail(state); + funcs->atomic_commit_tail(old_state); else - drm_atomic_helper_commit_tail(state); + drm_atomic_helper_commit_tail(old_state); - drm_atomic_helper_commit_cleanup_done(state); + drm_atomic_helper_commit_cleanup_done(old_state); - drm_atomic_state_put(state); + drm_atomic_state_put(old_state); } static void commit_work(struct work_struct *work) @@ -1226,9 +1234,6 @@ static void commit_work(struct work_struct *work) * function implements nonblocking commits, using * drm_atomic_helper_setup_commit() and related functions. * - * Note that right now this function does not support nonblocking commits, hence - * driver writers must implement their own version for now. - * * Committing the actual hardware state is done through the * ->atomic_commit_tail() callback of the &drm_mode_config_helper_funcs vtable, * or it's default implementation drm_atomic_helper_commit_tail(). @@ -1498,10 +1503,10 @@ static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc) /** * drm_atomic_helper_wait_for_dependencies - wait for required preceeding commits - * @state: new modeset state to be committed + * @old_state: atomic state object with old state structures * * This function waits for all preceeding commits that touch the same CRTC as - * @state to both be committed to the hardware (as signalled by + * @old_state to both be committed to the hardware (as signalled by * drm_atomic_helper_commit_hw_done) and executed by the hardware (as signalled * by calling drm_crtc_vblank_send_event on the event member of * &drm_crtc_state). @@ -1509,7 +1514,7 @@ static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc) * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ -void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *state) +void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; @@ -1517,7 +1522,7 @@ void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *state) int i; long ret; - for_each_crtc_in_state(state, crtc, crtc_state, i) { + for_each_crtc_in_state(old_state, crtc, crtc_state, i) { spin_lock(&crtc->commit_lock); commit = preceeding_commit(crtc); if (commit) @@ -1548,7 +1553,7 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_dependencies); /** * drm_atomic_helper_commit_hw_done - setup possible nonblocking commit - * @state: new modeset state to be committed + * @old_state: atomic state object with old state structures * * This function is used to signal completion of the hardware commit step. After * this step the driver is not allowed to read or change any permanent software @@ -1561,15 +1566,15 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_dependencies); * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ -void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *state) +void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; struct drm_crtc_commit *commit; int i; - for_each_crtc_in_state(state, crtc, crtc_state, i) { - commit = state->crtcs[i].commit; + for_each_crtc_in_state(old_state, crtc, crtc_state, i) { + commit = old_state->crtcs[i].commit; if (!commit) continue; @@ -1584,16 +1589,16 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_hw_done); /** * drm_atomic_helper_commit_cleanup_done - signal completion of commit - * @state: new modeset state to be committed + * @old_state: atomic state object with old state structures * - * This signals completion of the atomic update @state, including any cleanup - * work. If used, it must be called right before calling + * This signals completion of the atomic update @old_state, including any + * cleanup work. If used, it must be called right before calling * drm_atomic_state_put(). * * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ -void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *state) +void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; @@ -1601,8 +1606,8 @@ void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *state) int i; long ret; - for_each_crtc_in_state(state, crtc, crtc_state, i) { - commit = state->crtcs[i].commit; + for_each_crtc_in_state(old_state, crtc, crtc_state, i) { + commit = old_state->crtcs[i].commit; if (WARN_ON(!commit)) continue; @@ -2877,8 +2882,8 @@ retry: fail: if (ret == -EDEADLK) goto backoff; - - connector->dpms = old_mode; + if (ret != 0) + connector->dpms = old_mode; drm_atomic_state_put(state); return ret; |