diff options
Diffstat (limited to 'drivers/gpu/drm/drm_client_modeset.c')
| -rw-r--r-- | drivers/gpu/drm/drm_client_modeset.c | 1126 |
1 files changed, 1126 insertions, 0 deletions
diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c new file mode 100644 index 000000000000..56d36779d213 --- /dev/null +++ b/drivers/gpu/drm/drm_client_modeset.c @@ -0,0 +1,1126 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright 2018 Noralf Trønnes + * Copyright (c) 2006-2009 Red Hat Inc. + * Copyright (c) 2006-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_client.h> +#include <drm/drm_connector.h> +#include <drm/drm_crtc.h> +#include <drm/drm_device.h> +#include <drm/drm_drv.h> +#include <drm/drm_encoder.h> +#include <drm/drm_print.h> + +#include "drm_crtc_internal.h" +#include "drm_internal.h" + +#define DRM_CLIENT_MAX_CLONED_CONNECTORS 8 + +struct drm_client_offset { + int x, y; +}; + +int drm_client_modeset_create(struct drm_client_dev *client) +{ + struct drm_device *dev = client->dev; + unsigned int num_crtc = dev->mode_config.num_crtc; + unsigned int max_connector_count = 1; + struct drm_mode_set *modeset; + struct drm_crtc *crtc; + unsigned int i = 0; + + /* Add terminating zero entry to enable index less iteration */ + client->modesets = kcalloc(num_crtc + 1, sizeof(*client->modesets), GFP_KERNEL); + if (!client->modesets) + return -ENOMEM; + + mutex_init(&client->modeset_mutex); + + drm_for_each_crtc(crtc, dev) + client->modesets[i++].crtc = crtc; + + /* Cloning is only supported in the single crtc case. */ + if (num_crtc == 1) + max_connector_count = DRM_CLIENT_MAX_CLONED_CONNECTORS; + + for (modeset = client->modesets; modeset->crtc; modeset++) { + modeset->connectors = kcalloc(max_connector_count, + sizeof(*modeset->connectors), GFP_KERNEL); + if (!modeset->connectors) + goto err_free; + } + + return 0; + +err_free: + drm_client_modeset_free(client); + + return -ENOMEM; +} + +static void drm_client_modeset_release(struct drm_client_dev *client) +{ + struct drm_mode_set *modeset; + unsigned int i; + + drm_client_for_each_modeset(modeset, client) { + drm_mode_destroy(client->dev, modeset->mode); + modeset->mode = NULL; + modeset->fb = NULL; + + for (i = 0; i < modeset->num_connectors; i++) { + drm_connector_put(modeset->connectors[i]); + modeset->connectors[i] = NULL; + } + modeset->num_connectors = 0; + } +} + +void drm_client_modeset_free(struct drm_client_dev *client) +{ + struct drm_mode_set *modeset; + + mutex_lock(&client->modeset_mutex); + + drm_client_modeset_release(client); + + drm_client_for_each_modeset(modeset, client) + kfree(modeset->connectors); + + mutex_unlock(&client->modeset_mutex); + + mutex_destroy(&client->modeset_mutex); + kfree(client->modesets); +} + +static struct drm_mode_set * +drm_client_find_modeset(struct drm_client_dev *client, struct drm_crtc *crtc) +{ + struct drm_mode_set *modeset; + + drm_client_for_each_modeset(modeset, client) + if (modeset->crtc == crtc) + return modeset; + + return NULL; +} + +static struct drm_display_mode * +drm_connector_has_preferred_mode(struct drm_connector *connector, int width, int height) +{ + struct drm_display_mode *mode; + + list_for_each_entry(mode, &connector->modes, head) { + if (mode->hdisplay > width || + mode->vdisplay > height) + continue; + if (mode->type & DRM_MODE_TYPE_PREFERRED) + return mode; + } + return NULL; +} + +static struct drm_display_mode * +drm_connector_pick_cmdline_mode(struct drm_connector *connector) +{ + struct drm_cmdline_mode *cmdline_mode; + struct drm_display_mode *mode; + bool prefer_non_interlace; + + cmdline_mode = &connector->cmdline_mode; + if (cmdline_mode->specified == false) + return NULL; + + /* attempt to find a matching mode in the list of modes + * we have gotten so far, if not add a CVT mode that conforms + */ + if (cmdline_mode->rb || cmdline_mode->margins) + goto create_mode; + + prefer_non_interlace = !cmdline_mode->interlace; +again: + list_for_each_entry(mode, &connector->modes, head) { + /* Check (optional) mode name first */ + if (!strcmp(mode->name, cmdline_mode->name)) + return mode; + + /* check width/height */ + if (mode->hdisplay != cmdline_mode->xres || + mode->vdisplay != cmdline_mode->yres) + continue; + + if (cmdline_mode->refresh_specified) { + if (mode->vrefresh != cmdline_mode->refresh) + continue; + } + + if (cmdline_mode->interlace) { + if (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) + continue; + } else if (prefer_non_interlace) { + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + continue; + } + return mode; + } + + if (prefer_non_interlace) { + prefer_non_interlace = false; + goto again; + } + +create_mode: + mode = drm_mode_create_from_cmdline_mode(connector->dev, cmdline_mode); + if (mode) + list_add(&mode->head, &connector->modes); + + return mode; +} + +static bool drm_connector_enabled(struct drm_connector *connector, bool strict) +{ + bool enable; + + if (connector->display_info.non_desktop) + return false; + + if (strict) + enable = connector->status == connector_status_connected; + else + enable = connector->status != connector_status_disconnected; + + return enable; +} + +static void drm_client_connectors_enabled(struct drm_connector **connectors, + unsigned int connector_count, + bool *enabled) +{ + bool any_enabled = false; + struct drm_connector *connector; + int i = 0; + + for (i = 0; i < connector_count; i++) { + connector = connectors[i]; + enabled[i] = drm_connector_enabled(connector, true); + DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id, + connector->display_info.non_desktop ? "non desktop" : enabled[i] ? "yes" : "no"); + + any_enabled |= enabled[i]; + } + + if (any_enabled) + return; + + for (i = 0; i < connector_count; i++) + enabled[i] = drm_connector_enabled(connectors[i], false); +} + +static bool drm_client_target_cloned(struct drm_device *dev, + struct drm_connector **connectors, + unsigned int connector_count, + struct drm_display_mode **modes, + struct drm_client_offset *offsets, + bool *enabled, int width, int height) +{ + int count, i, j; + bool can_clone = false; + struct drm_display_mode *dmt_mode, *mode; + + /* only contemplate cloning in the single crtc case */ + if (dev->mode_config.num_crtc > 1) + return false; + + count = 0; + for (i = 0; i < connector_count; i++) { + if (enabled[i]) + count++; + } + + /* only contemplate cloning if more than one connector is enabled */ + if (count <= 1) + return false; + + /* check the command line or if nothing common pick 1024x768 */ + can_clone = true; + for (i = 0; i < connector_count; i++) { + if (!enabled[i]) + continue; + modes[i] = drm_connector_pick_cmdline_mode(connectors[i]); + if (!modes[i]) { + can_clone = false; + break; + } + for (j = 0; j < i; j++) { + if (!enabled[j]) + continue; + if (!drm_mode_match(modes[j], modes[i], + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS)) + can_clone = false; + } + } + + if (can_clone) { + DRM_DEBUG_KMS("can clone using command line\n"); + return true; + } + + /* try and find a 1024x768 mode on each connector */ + can_clone = true; + dmt_mode = drm_mode_find_dmt(dev, 1024, 768, 60, false); + + for (i = 0; i < connector_count; i++) { + if (!enabled[i]) + continue; + + list_for_each_entry(mode, &connectors[i]->modes, head) { + if (drm_mode_match(mode, dmt_mode, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_CLOCK | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS)) + modes[i] = mode; + } + if (!modes[i]) + can_clone = false; + } + + if (can_clone) { + DRM_DEBUG_KMS("can clone using 1024x768\n"); + return true; + } + DRM_INFO("kms: can't enable cloning when we probably wanted to.\n"); + return false; +} + +static int drm_client_get_tile_offsets(struct drm_connector **connectors, + unsigned int connector_count, + struct drm_display_mode **modes, + struct drm_client_offset *offsets, + int idx, + int h_idx, int v_idx) +{ + struct drm_connector *connector; + int i; + int hoffset = 0, voffset = 0; + + for (i = 0; i < connector_count; i++) { + connector = connectors[i]; + if (!connector->has_tile) + continue; + + if (!modes[i] && (h_idx || v_idx)) { + DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i, + connector->base.id); + continue; + } + if (connector->tile_h_loc < h_idx) + hoffset += modes[i]->hdisplay; + + if (connector->tile_v_loc < v_idx) + voffset += modes[i]->vdisplay; + } + offsets[idx].x = hoffset; + offsets[idx].y = voffset; + DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx); + return 0; +} + +static bool drm_client_target_preferred(struct drm_connector **connectors, + unsigned int connector_count, + struct drm_display_mode **modes, + struct drm_client_offset *offsets, + bool *enabled, int width, int height) +{ + const u64 mask = BIT_ULL(connector_count) - 1; + struct drm_connector *connector; + u64 conn_configured = 0; + int tile_pass = 0; + int i; + +retry: + for (i = 0; i < connector_count; i++) { + connector = connectors[i]; + + if (conn_configured & BIT_ULL(i)) + continue; + + if (enabled[i] == false) { + conn_configured |= BIT_ULL(i); + continue; + } + + /* first pass over all the untiled connectors */ + if (tile_pass == 0 && connector->has_tile) + continue; + + if (tile_pass == 1) { + if (connector->tile_h_loc != 0 || + connector->tile_v_loc != 0) + continue; + + } else { + if (connector->tile_h_loc != tile_pass - 1 && + connector->tile_v_loc != tile_pass - 1) + /* if this tile_pass doesn't cover any of the tiles - keep going */ + continue; + + /* + * find the tile offsets for this pass - need to find + * all tiles left and above + */ + drm_client_get_tile_offsets(connectors, connector_count, modes, offsets, i, + connector->tile_h_loc, connector->tile_v_loc); + } + DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n", + connector->base.id); + + /* got for command line mode first */ + modes[i] = drm_connector_pick_cmdline_mode(connector); + if (!modes[i]) { + DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n", + connector->base.id, connector->tile_group ? connector->tile_group->id : 0); + modes[i] = drm_connector_has_preferred_mode(connector, width, height); + } + /* No preferred modes, pick one off the list */ + if (!modes[i] && !list_empty(&connector->modes)) { + list_for_each_entry(modes[i], &connector->modes, head) + break; + } + DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name : + "none"); + conn_configured |= BIT_ULL(i); + } + + if ((conn_configured & mask) != mask) { + tile_pass++; + goto retry; + } + return true; +} + +static bool connector_has_possible_crtc(struct drm_connector *connector, + struct drm_crtc *crtc) +{ + struct drm_encoder *encoder; + int i; + + drm_connector_for_each_possible_encoder(connector, encoder, i) { + if (encoder->possible_crtcs & drm_crtc_mask(crtc)) + return true; + } + + return false; +} + +static int drm_client_pick_crtcs(struct drm_client_dev *client, + struct drm_connector **connectors, + unsigned int connector_count, + struct drm_crtc **best_crtcs, + struct drm_display_mode **modes, + int n, int width, int height) +{ + struct drm_device *dev = client->dev; + struct drm_connector *connector; + int my_score, best_score, score; + struct drm_crtc **crtcs, *crtc; + struct drm_mode_set *modeset; + int o; + + if (n == connector_count) + return 0; + + connector = connectors[n]; + + best_crtcs[n] = NULL; + best_score = drm_client_pick_crtcs(client, connectors, connector_count, + best_crtcs, modes, n + 1, width, height); + if (modes[n] == NULL) + return best_score; + + crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL); + if (!crtcs) + return best_score; + + my_score = 1; + if (connector->status == connector_status_connected) + my_score++; + if (connector->cmdline_mode.specified) + my_score++; + if (drm_connector_has_preferred_mode(connector, width, height)) + my_score++; + + /* + * select a crtc for this connector and then attempt to configure + * remaining connectors + */ + drm_client_for_each_modeset(modeset, client) { + crtc = modeset->crtc; + + if (!connector_has_possible_crtc(connector, crtc)) + continue; + + for (o = 0; o < n; o++) + if (best_crtcs[o] == crtc) + break; + + if (o < n) { + /* ignore cloning unless only a single crtc */ + if (dev->mode_config.num_crtc > 1) + continue; + + if (!drm_mode_equal(modes[o], modes[n])) + continue; + } + + crtcs[n] = crtc; + memcpy(crtcs, best_crtcs, n * sizeof(*crtcs)); + score = my_score + drm_client_pick_crtcs(client, connectors, connector_count, + crtcs, modes, n + 1, width, height); + if (score > best_score) { + best_score = score; + memcpy(best_crtcs, crtcs, connector_count * sizeof(*crtcs)); + } + } + + kfree(crtcs); + return best_score; +} + +/* Try to read the BIOS display configuration and use it for the initial config */ +static bool drm_client_firmware_config(struct drm_client_dev *client, + struct drm_connector **connectors, + unsigned int connector_count, + struct drm_crtc **crtcs, + struct drm_display_mode **modes, + struct drm_client_offset *offsets, + bool *enabled, int width, int height) +{ + unsigned int count = min_t(unsigned int, connector_count, BITS_PER_LONG); + unsigned long conn_configured, conn_seq, mask; + struct drm_device *dev = client->dev; + int i, j; + bool *save_enabled; + bool fallback = true, ret = true; + int num_connectors_enabled = 0; + int num_connectors_detected = 0; + struct drm_modeset_acquire_ctx ctx; + + if (!drm_drv_uses_atomic_modeset(dev)) + return false; + + save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL); + if (!save_enabled) + return false; + + drm_modeset_acquire_init(&ctx, 0); + + while (drm_modeset_lock_all_ctx(dev, &ctx) != 0) + drm_modeset_backoff(&ctx); + + memcpy(save_enabled, enabled, count); + mask = GENMASK(count - 1, 0); + conn_configured = 0; +retry: + conn_seq = conn_configured; + for (i = 0; i < count; i++) { + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_crtc *new_crtc; + + connector = connectors[i]; + + if (conn_configured & BIT(i)) + continue; + + if (conn_seq == 0 && !connector->has_tile) + continue; + + if (connector->status == connector_status_connected) + num_connectors_detected++; + + if (!enabled[i]) { + DRM_DEBUG_KMS("connector %s not enabled, skipping\n", + connector->name); + conn_configured |= BIT(i); + continue; + } + + if (connector->force == DRM_FORCE_OFF) { + DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n", + connector->name); + enabled[i] = false; + continue; + } + + encoder = connector->state->best_encoder; + if (!encoder || WARN_ON(!connector->state->crtc)) { + if (connector->force > DRM_FORCE_OFF) + goto bail; + + DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n", + connector->name); + enabled[i] = false; + conn_configured |= BIT(i); + continue; + } + + num_connectors_enabled++; + + new_crtc = connector->state->crtc; + + /* + * Make sure we're not trying to drive multiple connectors + * with a single CRTC, since our cloning support may not + * match the BIOS. + */ + for (j = 0; j < count; j++) { + if (crtcs[j] == new_crtc) { + DRM_DEBUG_KMS("fallback: cloned configuration\n"); + goto bail; + } + } + + DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n", + connector->name); + + /* go for command line mode first */ + modes[i] = drm_connector_pick_cmdline_mode(connector); + + /* try for preferred next */ + if (!modes[i]) { + DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n", + connector->name, connector->has_tile); + modes[i] = drm_connector_has_preferred_mode(connector, width, height); + } + + /* No preferred mode marked by the EDID? Are there any modes? */ + if (!modes[i] && !list_empty(&connector->modes)) { + DRM_DEBUG_KMS("using first mode listed on connector %s\n", + connector->name); + modes[i] = list_first_entry(&connector->modes, + struct drm_display_mode, + head); + } + + /* last resort: use current mode */ + if (!modes[i]) { + /* + * IMPORTANT: We want to use the adjusted mode (i.e. + * after the panel fitter upscaling) as the initial + * config, not the input mode, which is what crtc->mode + * usually contains. But since our current + * code puts a mode derived from the post-pfit timings + * into crtc->mode this works out correctly. + * + * This is crtc->mode and not crtc->state->mode for the + * fastboot check to work correctly. + */ + DRM_DEBUG_KMS("looking for current mode on connector %s\n", + connector->name); + modes[i] = &connector->state->crtc->mode; + } + crtcs[i] = new_crtc; + + DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n", + connector->name, + connector->state->crtc->base.id, + connector->state->crtc->name, + modes[i]->hdisplay, modes[i]->vdisplay, + modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : ""); + + fallback = false; + conn_configured |= BIT(i); + } + + if ((conn_configured & mask) != mask && conn_configured != conn_seq) + goto retry; + + /* + * If the BIOS didn't enable everything it could, fall back to have the + * same user experiencing of lighting up as much as possible like the + * fbdev helper library. + */ + if (num_connectors_enabled != num_connectors_detected && + num_connectors_enabled < dev->mode_config.num_crtc) { + DRM_DEBUG_KMS("fallback: Not all outputs enabled\n"); + DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled, + num_connectors_detected); + fallback = true; + } + + if (fallback) { +bail: + DRM_DEBUG_KMS("Not using firmware configuration\n"); + memcpy(enabled, save_enabled, count); + ret = false; + } + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); + + kfree(save_enabled); + return ret; +} + +/** + * drm_client_modeset_probe() - Probe for displays + * @client: DRM client + * @width: Maximum display mode width (optional) + * @height: Maximum display mode height (optional) + * + * This function sets up display pipelines for enabled connectors and stores the + * config in the client's modeset array. + * + * Returns: + * Zero on success or negative error code on failure. + */ +int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, unsigned int height) +{ + struct drm_connector *connector, **connectors = NULL; + struct drm_connector_list_iter conn_iter; + struct drm_device *dev = client->dev; + unsigned int total_modes_count = 0; + struct drm_client_offset *offsets; + unsigned int connector_count = 0; + struct drm_display_mode **modes; + struct drm_crtc **crtcs; + int i, ret = 0; + bool *enabled; + + DRM_DEBUG_KMS("\n"); + + if (!width) + width = dev->mode_config.max_width; + if (!height) + height = dev->mode_config.max_height; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_client_for_each_connector_iter(connector, &conn_iter) { + struct drm_connector **tmp; + + tmp = krealloc(connectors, (connector_count + 1) * sizeof(*connectors), GFP_KERNEL); + if (!tmp) { + ret = -ENOMEM; + goto free_connectors; + } + + connectors = tmp; + drm_connector_get(connector); + connectors[connector_count++] = connector; + } + drm_connector_list_iter_end(&conn_iter); + + if (!connector_count) + return 0; + + crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL); + modes = kcalloc(connector_count, sizeof(*modes), GFP_KERNEL); + offsets = kcalloc(connector_count, sizeof(*offsets), GFP_KERNEL); + enabled = kcalloc(connector_count, sizeof(bool), GFP_KERNEL); + if (!crtcs || !modes || !enabled || !offsets) { + DRM_ERROR("Memory allocation failed\n"); + ret = -ENOMEM; + goto out; + } + + mutex_lock(&client->modeset_mutex); + + mutex_lock(&dev->mode_config.mutex); + for (i = 0; i < connector_count; i++) + total_modes_count += connectors[i]->funcs->fill_modes(connectors[i], width, height); + if (!total_modes_count) + DRM_DEBUG_KMS("No connectors reported connected with modes\n"); + drm_client_connectors_enabled(connectors, connector_count, enabled); + + if (!drm_client_firmware_config(client, connectors, connector_count, crtcs, + modes, offsets, enabled, width, height)) { + memset(modes, 0, connector_count * sizeof(*modes)); + memset(crtcs, 0, connector_count * sizeof(*crtcs)); + memset(offsets, 0, connector_count * sizeof(*offsets)); + + if (!drm_client_target_cloned(dev, connectors, connector_count, modes, + offsets, enabled, width, height) && + !drm_client_target_preferred(connectors, connector_count, modes, + offsets, enabled, width, height)) + DRM_ERROR("Unable to find initial modes\n"); + + DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n", + width, height); + + drm_client_pick_crtcs(client, connectors, connector_count, + crtcs, modes, 0, width, height); + } + mutex_unlock(&dev->mode_config.mutex); + + drm_client_modeset_release(client); + + for (i = 0; i < connector_count; i++) { + struct drm_display_mode *mode = modes[i]; + struct drm_crtc *crtc = crtcs[i]; + struct drm_client_offset *offset = &offsets[i]; + + if (mode && crtc) { + struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc); + struct drm_connector *connector = connectors[i]; + + DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n", + mode->name, crtc->base.id, offset->x, offset->y); + + if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS || + (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) { + ret = -EINVAL; + break; + } + + modeset->mode = drm_mode_duplicate(dev, mode); + drm_connector_get(connector); + modeset->connectors[modeset->num_connectors++] = connector; + modeset->x = offset->x; + modeset->y = offset->y; + } + } + + mutex_unlock(&client->modeset_mutex); +out: + kfree(crtcs); + kfree(modes); + kfree(offsets); + kfree(enabled); +free_connectors: + for (i = 0; i < connector_count; i++) + drm_connector_put(connectors[i]); + kfree(connectors); + + return ret; +} +EXPORT_SYMBOL(drm_client_modeset_probe); + +/** + * drm_client_rotation() - Check the initial rotation value + * @modeset: DRM modeset + * @rotation: Returned rotation value + * + * This function checks if the primary plane in @modeset can hw rotate + * to match the rotation needed on its connector. + * + * Note: Currently only 0 and 180 degrees are supported. + * + * Return: + * True if the plane can do the rotation, false otherwise. + */ +bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation) +{ + struct drm_connector *connector = modeset->connectors[0]; + struct drm_plane *plane = modeset->crtc->primary; + struct drm_cmdline_mode *cmdline; + u64 valid_mask = 0; + unsigned int i; + + if (!modeset->num_connectors) + return false; + + switch (connector->display_info.panel_orientation) { + case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: + *rotation = DRM_MODE_ROTATE_180; + break; + case DRM_MODE_PANEL_ORIENTATION_LEFT_UP: + *rotation = DRM_MODE_ROTATE_90; + break; + case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: + *rotation = DRM_MODE_ROTATE_270; + break; + default: + *rotation = DRM_MODE_ROTATE_0; + } + + /** + * The panel already defined the default rotation + * through its orientation. Whatever has been provided + * on the command line needs to be added to that. + * + * Unfortunately, the rotations are at different bit + * indices, so the math to add them up are not as + * trivial as they could. + * + * Reflections on the other hand are pretty trivial to deal with, a + * simple XOR between the two handle the addition nicely. + */ + cmdline = &connector->cmdline_mode; + if (cmdline->specified) { + unsigned int cmdline_rest, panel_rest; + unsigned int cmdline_rot, panel_rot; + unsigned int sum_rot, sum_rest; + + panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK); + cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK); + sum_rot = (panel_rot + cmdline_rot) % 4; + + panel_rest = *rotation & ~DRM_MODE_ROTATE_MASK; + cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK; + sum_rest = panel_rest ^ cmdline_rest; + + *rotation = (1 << sum_rot) | sum_rest; + } + + /* + * TODO: support 90 / 270 degree hardware rotation, + * depending on the hardware this may require the framebuffer + * to be in a specific tiling format. + */ + if ((*rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_180 || + !plane->rotation_property) + return false; + + for (i = 0; i < plane->rotation_property->num_values; i++) + valid_mask |= (1ULL << plane->rotation_property->values[i]); + + if (!(*rotation & valid_mask)) + return false; + + return true; +} +EXPORT_SYMBOL(drm_client_rotation); + +static int drm_client_modeset_commit_atomic(struct drm_client_dev *client, bool active) +{ + struct drm_device *dev = client->dev; + struct drm_plane *plane; + struct drm_atomic_state *state; + struct drm_modeset_acquire_ctx ctx; + struct drm_mode_set *mode_set; + int ret; + + drm_modeset_acquire_init(&ctx, 0); + + state = drm_atomic_state_alloc(dev); + if (!state) { + ret = -ENOMEM; + goto out_ctx; + } + + state->acquire_ctx = &ctx; +retry: + drm_for_each_plane(plane, dev) { + struct drm_plane_state *plane_state; + + plane_state = drm_atomic_get_plane_state(state, plane); + if (IS_ERR(plane_state)) { + ret = PTR_ERR(plane_state); + goto out_state; + } + + plane_state->rotation = DRM_MODE_ROTATE_0; + + /* disable non-primary: */ + if (plane->type == DRM_PLANE_TYPE_PRIMARY) + continue; + + ret = __drm_atomic_helper_disable_plane(plane, plane_state); + if (ret != 0) + goto out_state; + } + + drm_client_for_each_modeset(mode_set, client) { + struct drm_plane *primary = mode_set->crtc->primary; + unsigned int rotation; + + if (drm_client_rotation(mode_set, &rotation)) { + struct drm_plane_state *plane_state; + + /* Cannot fail as we've already gotten the plane state above */ + plane_state = drm_atomic_get_new_plane_state(state, primary); + plane_state->rotation = rotation; + } + + ret = __drm_atomic_helper_set_config(mode_set, state); + if (ret != 0) + goto out_state; + + /* + * __drm_atomic_helper_set_config() sets active when a + * mode is set, unconditionally clear it if we force DPMS off + */ + if (!active) { + struct drm_crtc *crtc = mode_set->crtc; + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + + crtc_state->active = false; + } + } + + ret = drm_atomic_commit(state); + +out_state: + if (ret == -EDEADLK) + goto backoff; + + drm_atomic_state_put(state); +out_ctx: + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); + + return ret; + +backoff: + drm_atomic_state_clear(state); + drm_modeset_backoff(&ctx); + + goto retry; +} + +static int drm_client_modeset_commit_legacy(struct drm_client_dev *client) +{ + struct drm_device *dev = client->dev; + struct drm_mode_set *mode_set; + struct drm_plane *plane; + int ret = 0; + + drm_modeset_lock_all(dev); + drm_for_each_plane(plane, dev) { + if (plane->type != DRM_PLANE_TYPE_PRIMARY) + drm_plane_force_disable(plane); + + if (plane->rotation_property) + drm_mode_plane_set_obj_prop(plane, + plane->rotation_property, + DRM_MODE_ROTATE_0); + } + + drm_client_for_each_modeset(mode_set, client) { + struct drm_crtc *crtc = mode_set->crtc; + + if (crtc->funcs->cursor_set2) { + ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0); + if (ret) + goto out; + } else if (crtc->funcs->cursor_set) { + ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0); + if (ret) + goto out; + } + + ret = drm_mode_set_config_internal(mode_set); + if (ret) + goto out; + } +out: + drm_modeset_unlock_all(dev); + + return ret; +} + +/** + * drm_client_modeset_commit_force() - Force commit CRTC configuration + * @client: DRM client + * + * Commit modeset configuration to crtcs without checking if there is a DRM master. + * + * Returns: + * Zero on success or negative error code on failure. + */ +int drm_client_modeset_commit_force(struct drm_client_dev *client) +{ + struct drm_device *dev = client->dev; + int ret; + + mutex_lock(&client->modeset_mutex); + if (drm_drv_uses_atomic_modeset(dev)) + ret = drm_client_modeset_commit_atomic(client, true); + else + ret = drm_client_modeset_commit_legacy(client); + mutex_unlock(&client->modeset_mutex); + + return ret; +} +EXPORT_SYMBOL(drm_client_modeset_commit_force); + +/** + * drm_client_modeset_commit() - Commit CRTC configuration + * @client: DRM client + * + * Commit modeset configuration to crtcs. + * + * Returns: + * Zero on success or negative error code on failure. + */ +int drm_client_modeset_commit(struct drm_client_dev *client) +{ + struct drm_device *dev = client->dev; + int ret; + + if (!drm_master_internal_acquire(dev)) + return -EBUSY; + + ret = drm_client_modeset_commit_force(client); + + drm_master_internal_release(dev); + + return ret; +} +EXPORT_SYMBOL(drm_client_modeset_commit); + +static void drm_client_modeset_dpms_legacy(struct drm_client_dev *client, int dpms_mode) +{ + struct drm_device *dev = client->dev; + struct drm_connector *connector; + struct drm_mode_set *modeset; + int j; + + drm_modeset_lock_all(dev); + drm_client_for_each_modeset(modeset, client) { + if (!modeset->crtc->enabled) + continue; + + for (j = 0; j < modeset->num_connectors; j++) { + connector = modeset->connectors[j]; + connector->funcs->dpms(connector, dpms_mode); + drm_object_property_set_value(&connector->base, + dev->mode_config.dpms_property, dpms_mode); + } + } + drm_modeset_unlock_all(dev); +} + +/** + * drm_client_modeset_dpms() - Set DPMS mode + * @client: DRM client + * @mode: DPMS mode + * + * Note: For atomic drivers @mode is reduced to on/off. + * + * Returns: + * Zero on success or negative error code on failure. + */ +int drm_client_modeset_dpms(struct drm_client_dev *client, int mode) +{ + struct drm_device *dev = client->dev; + int ret = 0; + + if (!drm_master_internal_acquire(dev)) + return -EBUSY; + + mutex_lock(&client->modeset_mutex); + if (drm_drv_uses_atomic_modeset(dev)) + ret = drm_client_modeset_commit_atomic(client, mode == DRM_MODE_DPMS_ON); + else + drm_client_modeset_dpms_legacy(client, mode); + mutex_unlock(&client->modeset_mutex); + + drm_master_internal_release(dev); + + return ret; +} +EXPORT_SYMBOL(drm_client_modeset_dpms); |