1 files changed, 60 insertions, 20 deletions

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index f1283878ff6d..71dcbc64ae98 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -427,11 +427,13 @@ static u32 drm_dp_i2c_functionality(struct i2c_adapter *adapter)
  * retrying the transaction as appropriate.  It is assumed that the
  * aux->transfer function does not modify anything in the msg other than the
  * reply field.
+ *
+ * Returns bytes transferred on success, or a negative error code on failure.
  */
 static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 {
 	unsigned int retry;
-	int err;
+	int ret;
 
 	/*
 	 * DP1.2 sections 2.7.7.1.5.6.1 and 2.7.7.1.6.6.1: A DP Source device
@@ -440,14 +442,14 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 	 */
 	for (retry = 0; retry < 7; retry++) {
 		mutex_lock(&aux->hw_mutex);
-		err = aux->transfer(aux, msg);
+		ret = aux->transfer(aux, msg);
 		mutex_unlock(&aux->hw_mutex);
-		if (err < 0) {
-			if (err == -EBUSY)
+		if (ret < 0) {
+			if (ret == -EBUSY)
 				continue;
 
-			DRM_DEBUG_KMS("transaction failed: %d\n", err);
-			return err;
+			DRM_DEBUG_KMS("transaction failed: %d\n", ret);
+			return ret;
 		}
 
 
@@ -460,7 +462,7 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 			break;
 
 		case DP_AUX_NATIVE_REPLY_NACK:
-			DRM_DEBUG_KMS("native nack\n");
+			DRM_DEBUG_KMS("native nack (result=%d, size=%zu)\n", ret, msg->size);
 			return -EREMOTEIO;
 
 		case DP_AUX_NATIVE_REPLY_DEFER:
@@ -488,12 +490,10 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 			 * Both native ACK and I2C ACK replies received. We
 			 * can assume the transfer was successful.
 			 */
-			if (err < msg->size)
-				return -EPROTO;
-			return 0;
+			return ret;
 
 		case DP_AUX_I2C_REPLY_NACK:
-			DRM_DEBUG_KMS("I2C nack\n");
+			DRM_DEBUG_KMS("I2C nack (result=%d, size=%zu\n", ret, msg->size);
 			aux->i2c_nack_count++;
 			return -EREMOTEIO;
 
@@ -513,14 +513,55 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 	return -EREMOTEIO;
 }
 
+/*
+ * Keep retrying drm_dp_i2c_do_msg until all data has been transferred.
+ *
+ * Returns an error code on failure, or a recommended transfer size on success.
+ */
+static int drm_dp_i2c_drain_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *orig_msg)
+{
+	int err, ret = orig_msg->size;
+	struct drm_dp_aux_msg msg = *orig_msg;
+
+	while (msg.size > 0) {
+		err = drm_dp_i2c_do_msg(aux, &msg);
+		if (err <= 0)
+			return err == 0 ? -EPROTO : err;
+
+		if (err < msg.size && err < ret) {
+			DRM_DEBUG_KMS("Partial I2C reply: requested %zu bytes got %d bytes\n",
+				      msg.size, err);
+			ret = err;
+		}
+
+		msg.size -= err;
+		msg.buffer += err;
+	}
+
+	return ret;
+}
+
+/*
+ * Bizlink designed DP->DVI-D Dual Link adapters require the I2C over AUX
+ * packets to be as large as possible. If not, the I2C transactions never
+ * succeed. Hence the default is maximum.
+ */
+static int dp_aux_i2c_transfer_size __read_mostly = DP_AUX_MAX_PAYLOAD_BYTES;
+module_param_unsafe(dp_aux_i2c_transfer_size, int, 0644);
+MODULE_PARM_DESC(dp_aux_i2c_transfer_size,
+		 "Number of bytes to transfer in a single I2C over DP AUX CH message, (1-16, default 16)");
+
 static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 			   int num)
 {
 	struct drm_dp_aux *aux = adapter->algo_data;
 	unsigned int i, j;
+	unsigned transfer_size;
 	struct drm_dp_aux_msg msg;
 	int err = 0;
 
+	dp_aux_i2c_transfer_size = clamp(dp_aux_i2c_transfer_size, 1, DP_AUX_MAX_PAYLOAD_BYTES);
+
 	memset(&msg, 0, sizeof(msg));
 
 	for (i = 0; i < num; i++) {
@@ -538,20 +579,19 @@ static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 		err = drm_dp_i2c_do_msg(aux, &msg);
 		if (err < 0)
 			break;
-		/*
-		 * Many hardware implementations support FIFOs larger than a
-		 * single byte, but it has been empirically determined that
-		 * transferring data in larger chunks can actually lead to
-		 * decreased performance. Therefore each message is simply
-		 * transferred byte-by-byte.
+		/* We want each transaction to be as large as possible, but
+		 * we'll go to smaller sizes if the hardware gives us a
+		 * short reply.
 		 */
-		for (j = 0; j < msgs[i].len; j++) {
+		transfer_size = dp_aux_i2c_transfer_size;
+		for (j = 0; j < msgs[i].len; j += msg.size) {
 			msg.buffer = msgs[i].buf + j;
-			msg.size = 1;
+			msg.size = min(transfer_size, msgs[i].len - j);
 
-			err = drm_dp_i2c_do_msg(aux, &msg);
+			err = drm_dp_i2c_drain_msg(aux, &msg);
 			if (err < 0)
 				break;
+			transfer_size = err;
 		}
 		if (err < 0)
 			break;