diff options
Diffstat (limited to 'drivers/gpu/drm/drm_dp_helper.c')
| -rw-r--r-- | drivers/gpu/drm/drm_dp_helper.c | 650 |
1 files changed, 568 insertions, 82 deletions
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 5bd0934004e3..eedbb48815b7 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -950,6 +950,38 @@ bool drm_dp_downstream_444_to_420_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE] EXPORT_SYMBOL(drm_dp_downstream_444_to_420_conversion); /** + * drm_dp_downstream_rgb_to_ycbcr_conversion() - determine downstream facing port + * RGB->YCbCr conversion capability + * @dpcd: DisplayPort configuration data + * @port_cap: downstream facing port capabilities + * @color_spc: Colorspace for which conversion cap is sought + * + * Returns: whether the downstream facing port can convert RGB->YCbCr for a given + * colorspace. + */ +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + u8 color_spc) +{ + if (!drm_dp_is_branch(dpcd)) + return false; + + if (dpcd[DP_DPCD_REV] < 0x13) + return false; + + switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) { + case DP_DS_PORT_TYPE_HDMI: + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0) + return false; + + return port_cap[3] & color_spc; + default: + return false; + } +} +EXPORT_SYMBOL(drm_dp_downstream_rgb_to_ycbcr_conversion); + +/** * drm_dp_downstream_mode() - return a mode for downstream facing port * @dev: DRM device * @dpcd: DisplayPort configuration data @@ -1204,7 +1236,7 @@ bool drm_dp_read_sink_count_cap(struct drm_connector *connector, return connector->connector_type != DRM_MODE_CONNECTOR_eDP && dpcd[DP_DPCD_REV] >= DP_DPCD_REV_11 && dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT && - !drm_dp_has_quirk(desc, 0, DP_DPCD_QUIRK_NO_SINK_COUNT); + !drm_dp_has_quirk(desc, DP_DPCD_QUIRK_NO_SINK_COUNT); } EXPORT_SYMBOL(drm_dp_read_sink_count_cap); @@ -1925,87 +1957,6 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch) #undef DEVICE_ID_ANY #undef DEVICE_ID -struct edid_quirk { - u8 mfg_id[2]; - u8 prod_id[2]; - u32 quirks; -}; - -#define MFG(first, second) { (first), (second) } -#define PROD_ID(first, second) { (first), (second) } - -/* - * Some devices have unreliable OUIDs where they don't set the device ID - * correctly, and as a result we need to use the EDID for finding additional - * DP quirks in such cases. - */ -static const struct edid_quirk edid_quirk_list[] = { - /* Optional 4K AMOLED panel in the ThinkPad X1 Extreme 2nd Generation - * only supports DPCD backlight controls - */ - { MFG(0x4c, 0x83), PROD_ID(0x41, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - /* - * Some Dell CML 2020 systems have panels support both AUX and PWM - * backlight control, and some only support AUX backlight control. All - * said panels start up in AUX mode by default, and we don't have any - * support for disabling HDR mode on these panels which would be - * required to switch to PWM backlight control mode (plus, I'm not - * even sure we want PWM backlight controls over DPCD backlight - * controls anyway...). Until we have a better way of detecting these, - * force DPCD backlight mode on all of them. - */ - { MFG(0x06, 0xaf), PROD_ID(0x9b, 0x32), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x06, 0xaf), PROD_ID(0xeb, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x4d, 0x10), PROD_ID(0xc7, 0x14), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x4d, 0x10), PROD_ID(0xe6, 0x14), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x4c, 0x83), PROD_ID(0x47, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x09, 0xe5), PROD_ID(0xde, 0x08), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, -}; - -#undef MFG -#undef PROD_ID - -/** - * drm_dp_get_edid_quirks() - Check the EDID of a DP device to find additional - * DP-specific quirks - * @edid: The EDID to check - * - * While OUIDs are meant to be used to recognize a DisplayPort device, a lot - * of manufacturers don't seem to like following standards and neglect to fill - * the dev-ID in, making it impossible to only use OUIDs for determining - * quirks in some cases. This function can be used to check the EDID and look - * up any additional DP quirks. The bits returned by this function correspond - * to the quirk bits in &drm_dp_quirk. - * - * Returns: a bitmask of quirks, if any. The driver can check this using - * drm_dp_has_quirk(). - */ -u32 drm_dp_get_edid_quirks(const struct edid *edid) -{ - const struct edid_quirk *quirk; - u32 quirks = 0; - int i; - - if (!edid) - return 0; - - for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) { - quirk = &edid_quirk_list[i]; - if (memcmp(quirk->mfg_id, edid->mfg_id, - sizeof(edid->mfg_id)) == 0 && - memcmp(quirk->prod_id, edid->prod_code, - sizeof(edid->prod_code)) == 0) - quirks |= quirk->quirks; - } - - DRM_DEBUG_KMS("DP sink: EDID mfg %*phD prod-ID %*phD quirks: 0x%04x\n", - (int)sizeof(edid->mfg_id), edid->mfg_id, - (int)sizeof(edid->prod_code), edid->prod_code, quirks); - - return quirks; -} -EXPORT_SYMBOL(drm_dp_get_edid_quirks); - /** * drm_dp_read_desc - read sink/branch descriptor from DPCD * @aux: DisplayPort AUX channel @@ -2596,3 +2547,538 @@ void drm_dp_vsc_sdp_log(const char *level, struct device *dev, #undef DP_SDP_LOG } EXPORT_SYMBOL(drm_dp_vsc_sdp_log); + +/** + * drm_dp_get_pcon_max_frl_bw() - maximum frl supported by PCON + * @dpcd: DisplayPort configuration data + * @port_cap: port capabilities + * + * Returns maximum frl bandwidth supported by PCON in GBPS, + * returns 0 if not supported. + */ +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]) +{ + int bw; + u8 buf; + + buf = port_cap[2]; + bw = buf & DP_PCON_MAX_FRL_BW; + + switch (bw) { + case DP_PCON_MAX_9GBPS: + return 9; + case DP_PCON_MAX_18GBPS: + return 18; + case DP_PCON_MAX_24GBPS: + return 24; + case DP_PCON_MAX_32GBPS: + return 32; + case DP_PCON_MAX_40GBPS: + return 40; + case DP_PCON_MAX_48GBPS: + return 48; + case DP_PCON_MAX_0GBPS: + default: + return 0; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_get_pcon_max_frl_bw); + +/** + * drm_dp_pcon_frl_prepare() - Prepare PCON for FRL. + * @aux: DisplayPort AUX channel + * @enable_frl_ready_hpd: Configure DP_PCON_ENABLE_HPD_READY. + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd) +{ + int ret; + u8 buf = DP_PCON_ENABLE_SOURCE_CTL_MODE | + DP_PCON_ENABLE_LINK_FRL_MODE; + + if (enable_frl_ready_hpd) + buf |= DP_PCON_ENABLE_HPD_READY; + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); + + return ret; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_prepare); + +/** + * drm_dp_pcon_is_frl_ready() - Is PCON ready for FRL + * @aux: DisplayPort AUX channel + * + * Returns true if success, else returns false. + */ +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux) +{ + int ret; + u8 buf; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); + if (ret < 0) + return false; + + if (buf & DP_PCON_FRL_READY) + return true; + + return false; +} +EXPORT_SYMBOL(drm_dp_pcon_is_frl_ready); + +/** + * drm_dp_pcon_frl_configure_1() - Set HDMI LINK Configuration-Step1 + * @aux: DisplayPort AUX channel + * @max_frl_gbps: maximum frl bw to be configured between PCON and HDMI sink + * @concurrent_mode: true if concurrent mode or operation is required, + * false otherwise. + * + * Returns 0 if success, else returns negative error code. + */ + +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + bool concurrent_mode) +{ + int ret; + u8 buf; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); + if (ret < 0) + return ret; + + if (concurrent_mode) + buf |= DP_PCON_ENABLE_CONCURRENT_LINK; + else + buf &= ~DP_PCON_ENABLE_CONCURRENT_LINK; + + switch (max_frl_gbps) { + case 9: + buf |= DP_PCON_ENABLE_MAX_BW_9GBPS; + break; + case 18: + buf |= DP_PCON_ENABLE_MAX_BW_18GBPS; + break; + case 24: + buf |= DP_PCON_ENABLE_MAX_BW_24GBPS; + break; + case 32: + buf |= DP_PCON_ENABLE_MAX_BW_32GBPS; + break; + case 40: + buf |= DP_PCON_ENABLE_MAX_BW_40GBPS; + break; + case 48: + buf |= DP_PCON_ENABLE_MAX_BW_48GBPS; + break; + case 0: + buf |= DP_PCON_ENABLE_MAX_BW_0GBPS; + break; + default: + return -EINVAL; + } + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1); + +/** + * drm_dp_pcon_frl_configure_2() - Set HDMI Link configuration Step-2 + * @aux: DisplayPort AUX channel + * @max_frl_mask : Max FRL BW to be tried by the PCON with HDMI Sink + * @extended_train_mode : true for Extended Mode, false for Normal Mode. + * In Normal mode, the PCON tries each frl bw from the max_frl_mask starting + * from min, and stops when link training is successful. In Extended mode, all + * frl bw selected in the mask are trained by the PCON. + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + bool extended_train_mode) +{ + int ret; + u8 buf = max_frl_mask; + + if (extended_train_mode) + buf |= DP_PCON_FRL_LINK_TRAIN_EXTENDED; + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_configure_2); + +/** + * drm_dp_pcon_reset_frl_config() - Re-Set HDMI Link configuration. + * @aux: DisplayPort AUX channel + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux) +{ + int ret; + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, 0x0); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_reset_frl_config); + +/** + * drm_dp_pcon_frl_enable() - Enable HDMI link through FRL + * @aux: DisplayPort AUX channel + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux) +{ + int ret; + u8 buf = 0; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); + if (ret < 0) + return ret; + if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) { + DRM_DEBUG_KMS("PCON in Autonomous mode, can't enable FRL\n"); + return -EINVAL; + } + buf |= DP_PCON_ENABLE_HDMI_LINK; + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_enable); + +/** + * drm_dp_pcon_hdmi_link_active() - check if the PCON HDMI LINK status is active. + * @aux: DisplayPort AUX channel + * + * Returns true if link is active else returns false. + */ +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux) +{ + u8 buf; + int ret; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); + if (ret < 0) + return false; + + return buf & DP_PCON_HDMI_TX_LINK_ACTIVE; +} +EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_active); + +/** + * drm_dp_pcon_hdmi_link_mode() - get the PCON HDMI LINK MODE + * @aux: DisplayPort AUX channel + * @frl_trained_mask: pointer to store bitmask of the trained bw configuration. + * Valid only if the MODE returned is FRL. For Normal Link training mode + * only 1 of the bits will be set, but in case of Extended mode, more than + * one bits can be set. + * + * Returns the link mode : TMDS or FRL on success, else returns negative error + * code. + */ +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask) +{ + u8 buf; + int mode; + int ret; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_POST_FRL_STATUS, &buf); + if (ret < 0) + return ret; + + mode = buf & DP_PCON_HDMI_LINK_MODE; + + if (frl_trained_mask && DP_PCON_HDMI_MODE_FRL == mode) + *frl_trained_mask = (buf & DP_PCON_HDMI_FRL_TRAINED_BW) >> 1; + + return mode; +} +EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_mode); + +/** + * drm_dp_pcon_hdmi_frl_link_error_count() - print the error count per lane + * during link failure between PCON and HDMI sink + * @aux: DisplayPort AUX channel + * @connector: DRM connector + * code. + **/ + +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector) +{ + u8 buf, error_count; + int i, num_error; + struct drm_hdmi_info *hdmi = &connector->display_info.hdmi; + + for (i = 0; i < hdmi->max_lanes; i++) { + if (drm_dp_dpcd_readb(aux, DP_PCON_HDMI_ERROR_STATUS_LN0 + i, &buf) < 0) + return; + + error_count = buf & DP_PCON_HDMI_ERROR_COUNT_MASK; + switch (error_count) { + case DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS: + num_error = 100; + break; + case DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS: + num_error = 10; + break; + case DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS: + num_error = 3; + break; + default: + num_error = 0; + } + + DRM_ERROR("More than %d errors since the last read for lane %d", num_error, i); + } +} +EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count); + +/* + * drm_dp_pcon_enc_is_dsc_1_2 - Does PCON Encoder supports DSC 1.2 + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns true is PCON encoder is DSC 1.2 else returns false. + */ +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 buf; + u8 major_v, minor_v; + + buf = pcon_dsc_dpcd[DP_PCON_DSC_VERSION - DP_PCON_DSC_ENCODER]; + major_v = (buf & DP_PCON_DSC_MAJOR_MASK) >> DP_PCON_DSC_MAJOR_SHIFT; + minor_v = (buf & DP_PCON_DSC_MINOR_MASK) >> DP_PCON_DSC_MINOR_SHIFT; + + if (major_v == 1 && minor_v == 2) + return true; + + return false; +} +EXPORT_SYMBOL(drm_dp_pcon_enc_is_dsc_1_2); + +/* + * drm_dp_pcon_dsc_max_slices - Get max slices supported by PCON DSC Encoder + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns maximum no. of slices supported by the PCON DSC Encoder. + */ +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 slice_cap1, slice_cap2; + + slice_cap1 = pcon_dsc_dpcd[DP_PCON_DSC_SLICE_CAP_1 - DP_PCON_DSC_ENCODER]; + slice_cap2 = pcon_dsc_dpcd[DP_PCON_DSC_SLICE_CAP_2 - DP_PCON_DSC_ENCODER]; + + if (slice_cap2 & DP_PCON_DSC_24_PER_DSC_ENC) + return 24; + if (slice_cap2 & DP_PCON_DSC_20_PER_DSC_ENC) + return 20; + if (slice_cap2 & DP_PCON_DSC_16_PER_DSC_ENC) + return 16; + if (slice_cap1 & DP_PCON_DSC_12_PER_DSC_ENC) + return 12; + if (slice_cap1 & DP_PCON_DSC_10_PER_DSC_ENC) + return 10; + if (slice_cap1 & DP_PCON_DSC_8_PER_DSC_ENC) + return 8; + if (slice_cap1 & DP_PCON_DSC_6_PER_DSC_ENC) + return 6; + if (slice_cap1 & DP_PCON_DSC_4_PER_DSC_ENC) + return 4; + if (slice_cap1 & DP_PCON_DSC_2_PER_DSC_ENC) + return 2; + if (slice_cap1 & DP_PCON_DSC_1_PER_DSC_ENC) + return 1; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_dsc_max_slices); + +/* + * drm_dp_pcon_dsc_max_slice_width() - Get max slice width for Pcon DSC encoder + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns maximum width of the slices in pixel width i.e. no. of pixels x 320. + */ +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 buf; + + buf = pcon_dsc_dpcd[DP_PCON_DSC_MAX_SLICE_WIDTH - DP_PCON_DSC_ENCODER]; + + return buf * DP_DSC_SLICE_WIDTH_MULTIPLIER; +} +EXPORT_SYMBOL(drm_dp_pcon_dsc_max_slice_width); + +/* + * drm_dp_pcon_dsc_bpp_incr() - Get bits per pixel increment for PCON DSC encoder + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns the bpp precision supported by the PCON encoder. + */ +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 buf; + + buf = pcon_dsc_dpcd[DP_PCON_DSC_BPP_INCR - DP_PCON_DSC_ENCODER]; + + switch (buf & DP_PCON_DSC_BPP_INCR_MASK) { + case DP_PCON_DSC_ONE_16TH_BPP: + return 16; + case DP_PCON_DSC_ONE_8TH_BPP: + return 8; + case DP_PCON_DSC_ONE_4TH_BPP: + return 4; + case DP_PCON_DSC_ONE_HALF_BPP: + return 2; + case DP_PCON_DSC_ONE_BPP: + return 1; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_dsc_bpp_incr); + +static +int drm_dp_pcon_configure_dsc_enc(struct drm_dp_aux *aux, u8 pps_buf_config) +{ + u8 buf; + int ret; + + ret = drm_dp_dpcd_readb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); + if (ret < 0) + return ret; + + buf |= DP_PCON_ENABLE_DSC_ENCODER; + + if (pps_buf_config <= DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER) { + buf &= ~DP_PCON_ENCODER_PPS_OVERRIDE_MASK; + buf |= pps_buf_config << 2; + } + + ret = drm_dp_dpcd_writeb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); + if (ret < 0) + return ret; + + return 0; +} + +/** + * drm_dp_pcon_pps_default() - Let PCON fill the default pps parameters + * for DSC1.2 between PCON & HDMI2.1 sink + * @aux: DisplayPort AUX channel + * + * Returns 0 on success, else returns negative error code. + */ +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux) +{ + int ret; + + ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_DISABLED); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_pps_default); + +/** + * drm_dp_pcon_pps_override_buf() - Configure PPS encoder override buffer for + * HDMI sink + * @aux: DisplayPort AUX channel + * @pps_buf: 128 bytes to be written into PPS buffer for HDMI sink by PCON. + * + * Returns 0 on success, else returns negative error code. + */ +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVERRIDE_BASE, &pps_buf, 128); + if (ret < 0) + return ret; + + ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_pps_override_buf); + +/* + * drm_dp_pcon_pps_override_param() - Write PPS parameters to DSC encoder + * override registers + * @aux: DisplayPort AUX channel + * @pps_param: 3 Parameters (2 Bytes each) : Slice Width, Slice Height, + * bits_per_pixel. + * + * Returns 0 on success, else returns negative error code. + */ +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT, &pps_param[0], 2); + if (ret < 0) + return ret; + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH, &pps_param[2], 2); + if (ret < 0) + return ret; + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_BPP, &pps_param[4], 2); + if (ret < 0) + return ret; + + ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_pps_override_param); + +/* + * drm_dp_pcon_convert_rgb_to_ycbcr() - Configure the PCon to convert RGB to Ycbcr + * @aux: displayPort AUX channel + * @color_spc: Color-space/s for which conversion is to be enabled, 0 for disable. + * + * Returns 0 on success, else returns negative error code. + */ +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc) +{ + int ret; + u8 buf; + + ret = drm_dp_dpcd_readb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); + if (ret < 0) + return ret; + + if (color_spc & DP_CONVERSION_RGB_YCBCR_MASK) + buf |= (color_spc & DP_CONVERSION_RGB_YCBCR_MASK); + else + buf &= ~DP_CONVERSION_RGB_YCBCR_MASK; + + ret = drm_dp_dpcd_writeb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_convert_rgb_to_ycbcr); |