diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_bios.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_bios.c | 2262 |
1 files changed, 2262 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c new file mode 100644 index 000000000000..3ef4e9f573cf --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -0,0 +1,2262 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include <drm/drm_dp_helper.h> +#include <drm/i915_drm.h> + +#include "display/intel_gmbus.h" + +#include "i915_drv.h" + +#define _INTEL_BIOS_PRIVATE +#include "intel_vbt_defs.h" + +/** + * DOC: Video BIOS Table (VBT) + * + * The Video BIOS Table, or VBT, provides platform and board specific + * configuration information to the driver that is not discoverable or available + * through other means. The configuration is mostly related to display + * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in + * the PCI ROM. + * + * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB + * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that + * contain the actual configuration information. The VBT Header, and thus the + * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the + * BDB Header. The data blocks are concatenated after the BDB Header. The data + * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of + * data. (Block 53, the MIPI Sequence Block is an exception.) + * + * The driver parses the VBT during load. The relevant information is stored in + * driver private data for ease of use, and the actual VBT is not read after + * that. + */ + +#define SLAVE_ADDR1 0x70 +#define SLAVE_ADDR2 0x72 + +/* Get BDB block size given a pointer to Block ID. */ +static u32 _get_blocksize(const u8 *block_base) +{ + /* The MIPI Sequence Block v3+ has a separate size field. */ + if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3) + return *((const u32 *)(block_base + 4)); + else + return *((const u16 *)(block_base + 1)); +} + +/* Get BDB block size give a pointer to data after Block ID and Block Size. */ +static u32 get_blocksize(const void *block_data) +{ + return _get_blocksize(block_data - 3); +} + +static const void * +find_section(const void *_bdb, enum bdb_block_id section_id) +{ + const struct bdb_header *bdb = _bdb; + const u8 *base = _bdb; + int index = 0; + u32 total, current_size; + enum bdb_block_id current_id; + + /* skip to first section */ + index += bdb->header_size; + total = bdb->bdb_size; + + /* walk the sections looking for section_id */ + while (index + 3 < total) { + current_id = *(base + index); + current_size = _get_blocksize(base + index); + index += 3; + + if (index + current_size > total) + return NULL; + + if (current_id == section_id) + return base + index; + + index += current_size; + } + + return NULL; +} + +static void +fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, + const struct lvds_dvo_timing *dvo_timing) +{ + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + ((dvo_timing->hsync_pulse_width_hi << 8) | + dvo_timing->hsync_pulse_width_lo); + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + ((dvo_timing->vsync_off_hi << 4) | dvo_timing->vsync_off_lo); + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + ((dvo_timing->vsync_pulse_width_hi << 4) | + dvo_timing->vsync_pulse_width_lo); + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + if (dvo_timing->hsync_positive) + panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (dvo_timing->vsync_positive) + panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; + + panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) | + dvo_timing->himage_lo; + panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) | + dvo_timing->vimage_lo; + + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + + drm_mode_set_name(panel_fixed_mode); +} + +static const struct lvds_dvo_timing * +get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data, + const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs, + int index) +{ + /* + * the size of fp_timing varies on the different platform. + * So calculate the DVO timing relative offset in LVDS data + * entry to get the DVO timing entry + */ + + int lfp_data_size = + lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; + int dvo_timing_offset = + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].fp_timing_offset; + char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index; + + return (struct lvds_dvo_timing *)(entry + dvo_timing_offset); +} + +/* get lvds_fp_timing entry + * this function may return NULL if the corresponding entry is invalid + */ +static const struct lvds_fp_timing * +get_lvds_fp_timing(const struct bdb_header *bdb, + const struct bdb_lvds_lfp_data *data, + const struct bdb_lvds_lfp_data_ptrs *ptrs, + int index) +{ + size_t data_ofs = (const u8 *)data - (const u8 *)bdb; + u16 data_size = ((const u16 *)data)[-1]; /* stored in header */ + size_t ofs; + + if (index >= ARRAY_SIZE(ptrs->ptr)) + return NULL; + ofs = ptrs->ptr[index].fp_timing_offset; + if (ofs < data_ofs || + ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size) + return NULL; + return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs); +} + +/* Try to find integrated panel data */ +static void +parse_lfp_panel_data(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_lvds_options *lvds_options; + const struct bdb_lvds_lfp_data *lvds_lfp_data; + const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; + const struct lvds_dvo_timing *panel_dvo_timing; + const struct lvds_fp_timing *fp_timing; + struct drm_display_mode *panel_fixed_mode; + int panel_type; + int drrs_mode; + int ret; + + lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); + if (!lvds_options) + return; + + dev_priv->vbt.lvds_dither = lvds_options->pixel_dither; + + ret = intel_opregion_get_panel_type(dev_priv); + if (ret >= 0) { + WARN_ON(ret > 0xf); + panel_type = ret; + DRM_DEBUG_KMS("Panel type: %d (OpRegion)\n", panel_type); + } else { + if (lvds_options->panel_type > 0xf) { + DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n", + lvds_options->panel_type); + return; + } + panel_type = lvds_options->panel_type; + DRM_DEBUG_KMS("Panel type: %d (VBT)\n", panel_type); + } + + dev_priv->vbt.panel_type = panel_type; + + drrs_mode = (lvds_options->dps_panel_type_bits + >> (panel_type * 2)) & MODE_MASK; + /* + * VBT has static DRRS = 0 and seamless DRRS = 2. + * The below piece of code is required to adjust vbt.drrs_type + * to match the enum drrs_support_type. + */ + switch (drrs_mode) { + case 0: + dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT; + DRM_DEBUG_KMS("DRRS supported mode is static\n"); + break; + case 2: + dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT; + DRM_DEBUG_KMS("DRRS supported mode is seamless\n"); + break; + default: + dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; + DRM_DEBUG_KMS("DRRS not supported (VBT input)\n"); + break; + } + + lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); + if (!lvds_lfp_data) + return; + + lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); + if (!lvds_lfp_data_ptrs) + return; + + panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, + lvds_lfp_data_ptrs, + panel_type); + + panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); + if (!panel_fixed_mode) + return; + + fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing); + + dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode; + + DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); + + fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data, + lvds_lfp_data_ptrs, + panel_type); + if (fp_timing) { + /* check the resolution, just to be sure */ + if (fp_timing->x_res == panel_fixed_mode->hdisplay && + fp_timing->y_res == panel_fixed_mode->vdisplay) { + dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val; + DRM_DEBUG_KMS("VBT initial LVDS value %x\n", + dev_priv->vbt.bios_lvds_val); + } + } +} + +static void +parse_lfp_backlight(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_lfp_backlight_data *backlight_data; + const struct lfp_backlight_data_entry *entry; + int panel_type = dev_priv->vbt.panel_type; + + backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT); + if (!backlight_data) + return; + + if (backlight_data->entry_size != sizeof(backlight_data->data[0])) { + DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n", + backlight_data->entry_size); + return; + } + + entry = &backlight_data->data[panel_type]; + + dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM; + if (!dev_priv->vbt.backlight.present) { + DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n", + entry->type); + return; + } + + dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; + if (bdb->version >= 191 && + get_blocksize(backlight_data) >= sizeof(*backlight_data)) { + const struct lfp_backlight_control_method *method; + + method = &backlight_data->backlight_control[panel_type]; + dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller = method->controller; + } + + dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; + dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; + dev_priv->vbt.backlight.min_brightness = entry->min_brightness; + DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, " + "active %s, min brightness %u, level %u, controller %u\n", + dev_priv->vbt.backlight.pwm_freq_hz, + dev_priv->vbt.backlight.active_low_pwm ? "low" : "high", + dev_priv->vbt.backlight.min_brightness, + backlight_data->level[panel_type], + dev_priv->vbt.backlight.controller); +} + +/* Try to find sdvo panel data */ +static void +parse_sdvo_panel_data(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_sdvo_panel_dtds *dtds; + struct drm_display_mode *panel_fixed_mode; + int index; + + index = i915_modparams.vbt_sdvo_panel_type; + if (index == -2) { + DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n"); + return; + } + + if (index == -1) { + const struct bdb_sdvo_lvds_options *sdvo_lvds_options; + + sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); + if (!sdvo_lvds_options) + return; + + index = sdvo_lvds_options->panel_type; + } + + dtds = find_section(bdb, BDB_SDVO_PANEL_DTDS); + if (!dtds) + return; + + panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); + if (!panel_fixed_mode) + return; + + fill_detail_timing_data(panel_fixed_mode, &dtds->dtds[index]); + + dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode; + + DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); +} + +static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv, + bool alternate) +{ + switch (INTEL_GEN(dev_priv)) { + case 2: + return alternate ? 66667 : 48000; + case 3: + case 4: + return alternate ? 100000 : 96000; + default: + return alternate ? 100000 : 120000; + } +} + +static void +parse_general_features(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_general_features *general; + + general = find_section(bdb, BDB_GENERAL_FEATURES); + if (!general) + return; + + dev_priv->vbt.int_tv_support = general->int_tv_support; + /* int_crt_support can't be trusted on earlier platforms */ + if (bdb->version >= 155 && + (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv))) + dev_priv->vbt.int_crt_support = general->int_crt_support; + dev_priv->vbt.lvds_use_ssc = general->enable_ssc; + dev_priv->vbt.lvds_ssc_freq = + intel_bios_ssc_frequency(dev_priv, general->ssc_freq); + dev_priv->vbt.display_clock_mode = general->display_clock_mode; + dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted; + if (bdb->version >= 181) { + dev_priv->vbt.orientation = general->rotate_180 ? + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP : + DRM_MODE_PANEL_ORIENTATION_NORMAL; + } else { + dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + } + DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n", + dev_priv->vbt.int_tv_support, + dev_priv->vbt.int_crt_support, + dev_priv->vbt.lvds_use_ssc, + dev_priv->vbt.lvds_ssc_freq, + dev_priv->vbt.display_clock_mode, + dev_priv->vbt.fdi_rx_polarity_inverted); +} + +static const struct child_device_config * +child_device_ptr(const struct bdb_general_definitions *defs, int i) +{ + return (const void *) &defs->devices[i * defs->child_dev_size]; +} + +static void +parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, u8 bdb_version) +{ + struct sdvo_device_mapping *mapping; + const struct child_device_config *child; + int i, count = 0; + + /* + * Only parse SDVO mappings on gens that could have SDVO. This isn't + * accurate and doesn't have to be, as long as it's not too strict. + */ + if (!IS_GEN_RANGE(dev_priv, 3, 7)) { + DRM_DEBUG_KMS("Skipping SDVO device mapping\n"); + return; + } + + for (i = 0, count = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + if (child->slave_addr != SLAVE_ADDR1 && + child->slave_addr != SLAVE_ADDR2) { + /* + * If the slave address is neither 0x70 nor 0x72, + * it is not a SDVO device. Skip it. + */ + continue; + } + if (child->dvo_port != DEVICE_PORT_DVOB && + child->dvo_port != DEVICE_PORT_DVOC) { + /* skip the incorrect SDVO port */ + DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); + continue; + } + DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" + " %s port\n", + child->slave_addr, + (child->dvo_port == DEVICE_PORT_DVOB) ? + "SDVOB" : "SDVOC"); + mapping = &dev_priv->vbt.sdvo_mappings[child->dvo_port - 1]; + if (!mapping->initialized) { + mapping->dvo_port = child->dvo_port; + mapping->slave_addr = child->slave_addr; + mapping->dvo_wiring = child->dvo_wiring; + mapping->ddc_pin = child->ddc_pin; + mapping->i2c_pin = child->i2c_pin; + mapping->initialized = 1; + DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", + mapping->dvo_port, + mapping->slave_addr, + mapping->dvo_wiring, + mapping->ddc_pin, + mapping->i2c_pin); + } else { + DRM_DEBUG_KMS("Maybe one SDVO port is shared by " + "two SDVO device.\n"); + } + if (child->slave2_addr) { + /* Maybe this is a SDVO device with multiple inputs */ + /* And the mapping info is not added */ + DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" + " is a SDVO device with multiple inputs.\n"); + } + count++; + } + + if (!count) { + /* No SDVO device info is found */ + DRM_DEBUG_KMS("No SDVO device info is found in VBT\n"); + } +} + +static void +parse_driver_features(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_driver_features *driver; + + driver = find_section(bdb, BDB_DRIVER_FEATURES); + if (!driver) + return; + + if (INTEL_GEN(dev_priv) >= 5) { + /* + * Note that we consider BDB_DRIVER_FEATURE_INT_SDVO_LVDS + * to mean "eDP". The VBT spec doesn't agree with that + * interpretation, but real world VBTs seem to. + */ + if (driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS) + dev_priv->vbt.int_lvds_support = 0; + } else { + /* + * FIXME it's not clear which BDB version has the LVDS config + * bits defined. Revision history in the VBT spec says: + * "0.92 | Add two definitions for VBT value of LVDS Active + * Config (00b and 11b values defined) | 06/13/2005" + * but does not the specify the BDB version. + * + * So far version 134 (on i945gm) is the oldest VBT observed + * in the wild with the bits correctly populated. Version + * 108 (on i85x) does not have the bits correctly populated. + */ + if (bdb->version >= 134 && + driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS && + driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS) + dev_priv->vbt.int_lvds_support = 0; + } + + DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled); + /* + * If DRRS is not supported, drrs_type has to be set to 0. + * This is because, VBT is configured in such a way that + * static DRRS is 0 and DRRS not supported is represented by + * driver->drrs_enabled=false + */ + if (!driver->drrs_enabled) + dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; + dev_priv->vbt.psr.enable = driver->psr_enabled; +} + +static void +parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) +{ + const struct bdb_edp *edp; + const struct edp_power_seq *edp_pps; + const struct edp_fast_link_params *edp_link_params; + int panel_type = dev_priv->vbt.panel_type; + + edp = find_section(bdb, BDB_EDP); + if (!edp) + return; + + switch ((edp->color_depth >> (panel_type * 2)) & 3) { + case EDP_18BPP: + dev_priv->vbt.edp.bpp = 18; + break; + case EDP_24BPP: + dev_priv->vbt.edp.bpp = 24; + break; + case EDP_30BPP: + dev_priv->vbt.edp.bpp = 30; + break; + } + + /* Get the eDP sequencing and link info */ + edp_pps = &edp->power_seqs[panel_type]; + edp_link_params = &edp->fast_link_params[panel_type]; + + dev_priv->vbt.edp.pps = *edp_pps; + + switch (edp_link_params->rate) { + case EDP_RATE_1_62: + dev_priv->vbt.edp.rate = DP_LINK_BW_1_62; + break; + case EDP_RATE_2_7: + dev_priv->vbt.edp.rate = DP_LINK_BW_2_7; + break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n", + edp_link_params->rate); + break; + } + + switch (edp_link_params->lanes) { + case EDP_LANE_1: + dev_priv->vbt.edp.lanes = 1; + break; + case EDP_LANE_2: + dev_priv->vbt.edp.lanes = 2; + break; + case EDP_LANE_4: + dev_priv->vbt.edp.lanes = 4; + break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n", + edp_link_params->lanes); + break; + } + + switch (edp_link_params->preemphasis) { + case EDP_PREEMPHASIS_NONE: + dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0; + break; + case EDP_PREEMPHASIS_3_5dB: + dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1; + break; + case EDP_PREEMPHASIS_6dB: + dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2; + break; + case EDP_PREEMPHASIS_9_5dB: + dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3; + break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n", + edp_link_params->preemphasis); + break; + } + + switch (edp_link_params->vswing) { + case EDP_VSWING_0_4V: + dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0; + break; + case EDP_VSWING_0_6V: + dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1; + break; + case EDP_VSWING_0_8V: + dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2; + break; + case EDP_VSWING_1_2V: + dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3; + break; + default: + DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n", + edp_link_params->vswing); + break; + } + + if (bdb->version >= 173) { + u8 vswing; + + /* Don't read from VBT if module parameter has valid value*/ + if (i915_modparams.edp_vswing) { + dev_priv->vbt.edp.low_vswing = + i915_modparams.edp_vswing == 1; + } else { + vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF; + dev_priv->vbt.edp.low_vswing = vswing == 0; + } + } +} + +static void +parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) +{ + const struct bdb_psr *psr; + const struct psr_table *psr_table; + int panel_type = dev_priv->vbt.panel_type; + + psr = find_section(bdb, BDB_PSR); + if (!psr) { + DRM_DEBUG_KMS("No PSR BDB found.\n"); + return; + } + + psr_table = &psr->psr_table[panel_type]; + + dev_priv->vbt.psr.full_link = psr_table->full_link; + dev_priv->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup; + + /* Allowed VBT values goes from 0 to 15 */ + dev_priv->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 : + psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames; + + switch (psr_table->lines_to_wait) { + case 0: + dev_priv->vbt.psr.lines_to_wait = PSR_0_LINES_TO_WAIT; + break; + case 1: + dev_priv->vbt.psr.lines_to_wait = PSR_1_LINE_TO_WAIT; + break; + case 2: + dev_priv->vbt.psr.lines_to_wait = PSR_4_LINES_TO_WAIT; + break; + case 3: + dev_priv->vbt.psr.lines_to_wait = PSR_8_LINES_TO_WAIT; + break; + default: + DRM_DEBUG_KMS("VBT has unknown PSR lines to wait %u\n", + psr_table->lines_to_wait); + break; + } + + /* + * New psr options 0=500us, 1=100us, 2=2500us, 3=0us + * Old decimal value is wake up time in multiples of 100 us. + */ + if (bdb->version >= 205 && + (IS_GEN9_BC(dev_priv) || IS_GEMINILAKE(dev_priv) || + INTEL_GEN(dev_priv) >= 10)) { + switch (psr_table->tp1_wakeup_time) { + case 0: + dev_priv->vbt.psr.tp1_wakeup_time_us = 500; + break; + case 1: + dev_priv->vbt.psr.tp1_wakeup_time_us = 100; + break; + case 3: + dev_priv->vbt.psr.tp1_wakeup_time_us = 0; + break; + default: + DRM_DEBUG_KMS("VBT tp1 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", + psr_table->tp1_wakeup_time); + /* fallthrough */ + case 2: + dev_priv->vbt.psr.tp1_wakeup_time_us = 2500; + break; + } + + switch (psr_table->tp2_tp3_wakeup_time) { + case 0: + dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 500; + break; + case 1: + dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 100; + break; + case 3: + dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 0; + break; + default: + DRM_DEBUG_KMS("VBT tp2_tp3 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", + psr_table->tp2_tp3_wakeup_time); + /* fallthrough */ + case 2: + dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 2500; + break; + } + } else { + dev_priv->vbt.psr.tp1_wakeup_time_us = psr_table->tp1_wakeup_time * 100; + dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100; + } + + if (bdb->version >= 226) { + u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time; + + wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3; + switch (wakeup_time) { + case 0: + wakeup_time = 500; + break; + case 1: + wakeup_time = 100; + break; + case 3: + wakeup_time = 50; + break; + default: + case 2: + wakeup_time = 2500; + break; + } + dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = wakeup_time; + } else { + /* Reusing PSR1 wakeup time for PSR2 in older VBTs */ + dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = dev_priv->vbt.psr.tp2_tp3_wakeup_time_us; + } +} + +static void parse_dsi_backlight_ports(struct drm_i915_private *dev_priv, + u16 version, enum port port) +{ + if (!dev_priv->vbt.dsi.config->dual_link || version < 197) { + dev_priv->vbt.dsi.bl_ports = BIT(port); + if (dev_priv->vbt.dsi.config->cabc_supported) + dev_priv->vbt.dsi.cabc_ports = BIT(port); + + return; + } + + switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) { + case DL_DCS_PORT_A: + dev_priv->vbt.dsi.bl_ports = BIT(PORT_A); + break; + case DL_DCS_PORT_C: + dev_priv->vbt.dsi.bl_ports = BIT(PORT_C); + break; + default: + case DL_DCS_PORT_A_AND_C: + dev_priv->vbt.dsi.bl_ports = BIT(PORT_A) | BIT(PORT_C); + break; + } + + if (!dev_priv->vbt.dsi.config->cabc_supported) + return; + + switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) { + case DL_DCS_PORT_A: + dev_priv->vbt.dsi.cabc_ports = BIT(PORT_A); + break; + case DL_DCS_PORT_C: + dev_priv->vbt.dsi.cabc_ports = BIT(PORT_C); + break; + default: + case DL_DCS_PORT_A_AND_C: + dev_priv->vbt.dsi.cabc_ports = + BIT(PORT_A) | BIT(PORT_C); + break; + } +} + +static void +parse_mipi_config(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_mipi_config *start; + const struct mipi_config *config; + const struct mipi_pps_data *pps; + int panel_type = dev_priv->vbt.panel_type; + enum port port; + + /* parse MIPI blocks only if LFP type is MIPI */ + if (!intel_bios_is_dsi_present(dev_priv, &port)) + return; + + /* Initialize this to undefined indicating no generic MIPI support */ + dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID; + + /* Block #40 is already parsed and panel_fixed_mode is + * stored in dev_priv->lfp_lvds_vbt_mode + * resuse this when needed + */ + + /* Parse #52 for panel index used from panel_type already + * parsed + */ + start = find_section(bdb, BDB_MIPI_CONFIG); + if (!start) { + DRM_DEBUG_KMS("No MIPI config BDB found"); + return; + } + + DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n", + panel_type); + + /* + * get hold of the correct configuration block and pps data as per + * the panel_type as index + */ + config = &start->config[panel_type]; + pps = &start->pps[panel_type]; + + /* store as of now full data. Trim when we realise all is not needed */ + dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL); + if (!dev_priv->vbt.dsi.config) + return; + + dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL); + if (!dev_priv->vbt.dsi.pps) { + kfree(dev_priv->vbt.dsi.config); + return; + } + + parse_dsi_backlight_ports(dev_priv, bdb->version, port); + + /* FIXME is the 90 vs. 270 correct? */ + switch (config->rotation) { + case ENABLE_ROTATION_0: + /* + * Most (all?) VBTs claim 0 degrees despite having + * an upside down panel, thus we do not trust this. + */ + dev_priv->vbt.dsi.orientation = + DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + break; + case ENABLE_ROTATION_90: + dev_priv->vbt.dsi.orientation = + DRM_MODE_PANEL_ORIENTATION_RIGHT_UP; + break; + case ENABLE_ROTATION_180: + dev_priv->vbt.dsi.orientation = + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; + break; + case ENABLE_ROTATION_270: + dev_priv->vbt.dsi.orientation = + DRM_MODE_PANEL_ORIENTATION_LEFT_UP; + break; + } + + /* We have mandatory mipi config blocks. Initialize as generic panel */ + dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID; +} + +/* Find the sequence block and size for the given panel. */ +static const u8 * +find_panel_sequence_block(const struct bdb_mipi_sequence *sequence, + u16 panel_id, u32 *seq_size) +{ + u32 total = get_blocksize(sequence); + const u8 *data = &sequence->data[0]; + u8 current_id; + u32 current_size; + int header_size = sequence->version >= 3 ? 5 : 3; + int index = 0; + int i; + + /* skip new block size */ + if (sequence->version >= 3) + data += 4; + + for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) { + if (index + header_size > total) { + DRM_ERROR("Invalid sequence block (header)\n"); + return NULL; + } + + current_id = *(data + index); + if (sequence->version >= 3) + current_size = *((const u32 *)(data + index + 1)); + else + current_size = *((const u16 *)(data + index + 1)); + + index += header_size; + + if (index + current_size > total) { + DRM_ERROR("Invalid sequence block\n"); + return NULL; + } + + if (current_id == panel_id) { + *seq_size = current_size; + return data + index; + } + + index += current_size; + } + + DRM_ERROR("Sequence block detected but no valid configuration\n"); + + return NULL; +} + +static int goto_next_sequence(const u8 *data, int index, int total) +{ + u16 len; + + /* Skip Sequence Byte. */ + for (index = index + 1; index < total; index += len) { + u8 operation_byte = *(data + index); + index++; + + switch (operation_byte) { + case MIPI_SEQ_ELEM_END: + return index; + case MIPI_SEQ_ELEM_SEND_PKT: + if (index + 4 > total) + return 0; + + len = *((const u16 *)(data + index + 2)) + 4; + break; + case MIPI_SEQ_ELEM_DELAY: + len = 4; + break; + case MIPI_SEQ_ELEM_GPIO: + len = 2; + break; + case MIPI_SEQ_ELEM_I2C: + if (index + 7 > total) + return 0; + len = *(data + index + 6) + 7; + break; + default: + DRM_ERROR("Unknown operation byte\n"); + return 0; + } + } + + return 0; +} + +static int goto_next_sequence_v3(const u8 *data, int index, int total) +{ + int seq_end; + u16 len; + u32 size_of_sequence; + + /* + * Could skip sequence based on Size of Sequence alone, but also do some + * checking on the structure. + */ + if (total < 5) { + DRM_ERROR("Too small sequence size\n"); + return 0; + } + + /* Skip Sequence Byte. */ + index++; + + /* + * Size of Sequence. Excludes the Sequence Byte and the size itself, + * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END + * byte. + */ + size_of_sequence = *((const u32 *)(data + index)); + index += 4; + + seq_end = index + size_of_sequence; + if (seq_end > total) { + DRM_ERROR("Invalid sequence size\n"); + return 0; + } + + for (; index < total; index += len) { + u8 operation_byte = *(data + index); + index++; + + if (operation_byte == MIPI_SEQ_ELEM_END) { + if (index != seq_end) { + DRM_ERROR("Invalid element structure\n"); + return 0; + } + return index; + } + + len = *(data + index); + index++; + + /* + * FIXME: Would be nice to check elements like for v1/v2 in + * goto_next_sequence() above. + */ + switch (operation_byte) { + case MIPI_SEQ_ELEM_SEND_PKT: + case MIPI_SEQ_ELEM_DELAY: + case MIPI_SEQ_ELEM_GPIO: + case MIPI_SEQ_ELEM_I2C: + case MIPI_SEQ_ELEM_SPI: + case MIPI_SEQ_ELEM_PMIC: + break; + default: + DRM_ERROR("Unknown operation byte %u\n", + operation_byte); + break; + } + } + + return 0; +} + +/* + * Get len of pre-fixed deassert fragment from a v1 init OTP sequence, + * skip all delay + gpio operands and stop at the first DSI packet op. + */ +static int get_init_otp_deassert_fragment_len(struct drm_i915_private *dev_priv) +{ + const u8 *data = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; + int index, len; + + if (WARN_ON(!data || dev_priv->vbt.dsi.seq_version != 1)) + return 0; + + /* index = 1 to skip sequence byte */ + for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) { + switch (data[index]) { + case MIPI_SEQ_ELEM_SEND_PKT: + return index == 1 ? 0 : index; + case MIPI_SEQ_ELEM_DELAY: + len = 5; /* 1 byte for operand + uint32 */ + break; + case MIPI_SEQ_ELEM_GPIO: + len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */ + break; + default: + return 0; + } + } + + return 0; +} + +/* + * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. + * The deassert must be done before calling intel_dsi_device_ready, so for + * these devices we split the init OTP sequence into a deassert sequence and + * the actual init OTP part. + */ +static void fixup_mipi_sequences(struct drm_i915_private *dev_priv) +{ + u8 *init_otp; + int len; + + /* Limit this to VLV for now. */ + if (!IS_VALLEYVIEW(dev_priv)) + return; + + /* Limit this to v1 vid-mode sequences */ + if (dev_priv->vbt.dsi.config->is_cmd_mode || + dev_priv->vbt.dsi.seq_version != 1) + return; + + /* Only do this if there are otp and assert seqs and no deassert seq */ + if (!dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] || + !dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] || + dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) + return; + + /* The deassert-sequence ends at the first DSI packet */ + len = get_init_otp_deassert_fragment_len(dev_priv); + if (!len) + return; + + DRM_DEBUG_KMS("Using init OTP fragment to deassert reset\n"); + + /* Copy the fragment, update seq byte and terminate it */ + init_otp = (u8 *)dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; + dev_priv->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL); + if (!dev_priv->vbt.dsi.deassert_seq) + return; + dev_priv->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET; + dev_priv->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END; + /* Use the copy for deassert */ + dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] = + dev_priv->vbt.dsi.deassert_seq; + /* Replace the last byte of the fragment with init OTP seq byte */ + init_otp[len - 1] = MIPI_SEQ_INIT_OTP; + /* And make MIPI_MIPI_SEQ_INIT_OTP point to it */ + dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1; +} + +static void +parse_mipi_sequence(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + int panel_type = dev_priv->vbt.panel_type; + const struct bdb_mipi_sequence *sequence; + const u8 *seq_data; + u32 seq_size; + u8 *data; + int index = 0; + + /* Only our generic panel driver uses the sequence block. */ + if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID) + return; + + sequence = find_section(bdb, BDB_MIPI_SEQUENCE); + if (!sequence) { + DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n"); + return; + } + + /* Fail gracefully for forward incompatible sequence block. */ + if (sequence->version >= 4) { + DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n", + sequence->version); + return; + } + + DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version); + + seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size); + if (!seq_data) + return; + + data = kmemdup(seq_data, seq_size, GFP_KERNEL); + if (!data) + return; + + /* Parse the sequences, store pointers to each sequence. */ + for (;;) { + u8 seq_id = *(data + index); + if (seq_id == MIPI_SEQ_END) + break; + + if (seq_id >= MIPI_SEQ_MAX) { + DRM_ERROR("Unknown sequence %u\n", seq_id); + goto err; + } + + /* Log about presence of sequences we won't run. */ + if (seq_id == MIPI_SEQ_TEAR_ON || seq_id == MIPI_SEQ_TEAR_OFF) + DRM_DEBUG_KMS("Unsupported sequence %u\n", seq_id); + + dev_priv->vbt.dsi.sequence[seq_id] = data + index; + + if (sequence->version >= 3) + index = goto_next_sequence_v3(data, index, seq_size); + else + index = goto_next_sequence(data, index, seq_size); + if (!index) { + DRM_ERROR("Invalid sequence %u\n", seq_id); + goto err; + } + } + + dev_priv->vbt.dsi.data = data; + dev_priv->vbt.dsi.size = seq_size; + dev_priv->vbt.dsi.seq_version = sequence->version; + + fixup_mipi_sequences(dev_priv); + + DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n"); + return; + +err: + kfree(data); + memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence)); +} + +static u8 translate_iboost(u8 val) +{ + static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */ + + if (val >= ARRAY_SIZE(mapping)) { + DRM_DEBUG_KMS("Unsupported I_boost value found in VBT (%d), display may not work properly\n", val); + return 0; + } + return mapping[val]; +} + +static enum port get_port_by_ddc_pin(struct drm_i915_private *i915, u8 ddc_pin) +{ + const struct ddi_vbt_port_info *info; + enum port port; + + for (port = PORT_A; port < I915_MAX_PORTS; port++) { + info = &i915->vbt.ddi_port_info[port]; + + if (info->child && ddc_pin == info->alternate_ddc_pin) + return port; + } + + return PORT_NONE; +} + +static void sanitize_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_ddc_pin) + return; + + p = get_port_by_ddc_pin(dev_priv, info->alternate_ddc_pin); + if (p != PORT_NONE) { + DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, " + "disabling port %c DVI/HDMI support\n", + port_name(port), info->alternate_ddc_pin, + port_name(p), port_name(port)); + + /* + * If we have multiple ports supposedly sharing the + * pin, then dvi/hdmi couldn't exist on the shared + * port. Otherwise they share the same ddc bin and + * system couldn't communicate with them separately. + * + * Give child device order the priority, first come first + * served. + */ + info->supports_dvi = false; + info->supports_hdmi = false; + info->alternate_ddc_pin = 0; + } +} + +static enum port get_port_by_aux_ch(struct drm_i915_private *i915, u8 aux_ch) +{ + const struct ddi_vbt_port_info *info; + enum port port; + + for (port = PORT_A; port < I915_MAX_PORTS; port++) { + info = &i915->vbt.ddi_port_info[port]; + + if (info->child && aux_ch == info->alternate_aux_channel) + return port; + } + + return PORT_NONE; +} + +static void sanitize_aux_ch(struct drm_i915_private *dev_priv, + enum port port) +{ + struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_aux_channel) + return; + + p = get_port_by_aux_ch(dev_priv, info->alternate_aux_channel); + if (p != PORT_NONE) { + DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, " + "disabling port %c DP support\n", + port_name(port), info->alternate_aux_channel, + port_name(p), port_name(port)); + + /* + * If we have multiple ports supposedlt sharing the + * aux channel, then DP couldn't exist on the shared + * port. Otherwise they share the same aux channel + * and system couldn't communicate with them separately. + * + * Give child device order the priority, first come first + * served. + */ + info->supports_dp = false; + info->alternate_aux_channel = 0; + } +} + +static const u8 cnp_ddc_pin_map[] = { + [0] = 0, /* N/A */ + [DDC_BUS_DDI_B] = GMBUS_PIN_1_BXT, + [DDC_BUS_DDI_C] = GMBUS_PIN_2_BXT, + [DDC_BUS_DDI_D] = GMBUS_PIN_4_CNP, /* sic */ + [DDC_BUS_DDI_F] = GMBUS_PIN_3_BXT, /* sic */ +}; + +static const u8 icp_ddc_pin_map[] = { + [ICL_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT, + [ICL_DDC_BUS_DDI_B] = GMBUS_PIN_2_BXT, + [ICL_DDC_BUS_PORT_1] = GMBUS_PIN_9_TC1_ICP, + [ICL_DDC_BUS_PORT_2] = GMBUS_PIN_10_TC2_ICP, + [ICL_DDC_BUS_PORT_3] = GMBUS_PIN_11_TC3_ICP, + [ICL_DDC_BUS_PORT_4] = GMBUS_PIN_12_TC4_ICP, +}; + +static const u8 mcc_ddc_pin_map[] = { + [MCC_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT, + [MCC_DDC_BUS_DDI_B] = GMBUS_PIN_2_BXT, + [MCC_DDC_BUS_DDI_C] = GMBUS_PIN_9_TC1_ICP, +}; + +static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin) +{ + const u8 *ddc_pin_map; + int n_entries; + + if (HAS_PCH_MCC(dev_priv)) { + ddc_pin_map = mcc_ddc_pin_map; + n_entries = ARRAY_SIZE(mcc_ddc_pin_map); + } else if (HAS_PCH_ICP(dev_priv)) { + ddc_pin_map = icp_ddc_pin_map; + n_entries = ARRAY_SIZE(icp_ddc_pin_map); + } else if (HAS_PCH_CNP(dev_priv)) { + ddc_pin_map = cnp_ddc_pin_map; + n_entries = ARRAY_SIZE(cnp_ddc_pin_map); + } else { + /* Assuming direct map */ + return vbt_pin; + } + + if (vbt_pin < n_entries && ddc_pin_map[vbt_pin] != 0) + return ddc_pin_map[vbt_pin]; + + DRM_DEBUG_KMS("Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n", + vbt_pin); + return 0; +} + +static enum port dvo_port_to_port(u8 dvo_port) +{ + /* + * Each DDI port can have more than one value on the "DVO Port" field, + * so look for all the possible values for each port. + */ + static const int dvo_ports[][3] = { + [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1}, + [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1}, + [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1}, + [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1}, + [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE}, + [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1}, + }; + enum port port; + int i; + + for (port = PORT_A; port < ARRAY_SIZE(dvo_ports); port++) { + for (i = 0; i < ARRAY_SIZE(dvo_ports[port]); i++) { + if (dvo_ports[port][i] == -1) + break; + + if (dvo_port == dvo_ports[port][i]) + return port; + } + } + + return PORT_NONE; +} + +static void parse_ddi_port(struct drm_i915_private *dev_priv, + const struct child_device_config *child, + u8 bdb_version) +{ + struct ddi_vbt_port_info *info; + bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; + enum port port; + + port = dvo_port_to_port(child->dvo_port); + if (port == PORT_NONE) + return; + + info = &dev_priv->vbt.ddi_port_info[port]; + + if (info->child) { + DRM_DEBUG_KMS("More than one child device for port %c in VBT, using the first.\n", + port_name(port)); + return; + } + + is_dvi = child->device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; + is_dp = child->device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT; + is_crt = child->device_type & DEVICE_TYPE_ANALOG_OUTPUT; + is_hdmi = is_dvi && (child->device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0; + is_edp = is_dp && (child->device_type & DEVICE_TYPE_INTERNAL_CONNECTOR); + + if (port == PORT_A && is_dvi) { + DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n", + is_hdmi ? "/HDMI" : ""); + is_dvi = false; + is_hdmi = false; + } + + info->supports_dvi = is_dvi; + info->supports_hdmi = is_hdmi; + info->supports_dp = is_dp; + info->supports_edp = is_edp; + + if (bdb_version >= 195) + info->supports_typec_usb = child->dp_usb_type_c; + + if (bdb_version >= 209) + info->supports_tbt = child->tbt; + + DRM_DEBUG_KMS("Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d\n", + port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp, + HAS_LSPCON(dev_priv) && child->lspcon, + info->supports_typec_usb, info->supports_tbt); + + if (is_edp && is_dvi) + DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n", + port_name(port)); + if (is_crt && port != PORT_E) + DRM_DEBUG_KMS("Port %c is analog\n", port_name(port)); + if (is_crt && (is_dvi || is_dp)) + DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n", + port_name(port)); + if (is_dvi && (port == PORT_A || port == PORT_E)) + DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port)); + if (!is_dvi && !is_dp && !is_crt) + DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n", + port_name(port)); + if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E)) + DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); + + if (is_dvi) { + u8 ddc_pin; + + ddc_pin = map_ddc_pin(dev_priv, child->ddc_pin); + if (intel_gmbus_is_valid_pin(dev_priv, ddc_pin)) { + info->alternate_ddc_pin = ddc_pin; + sanitize_ddc_pin(dev_priv, port); + } else { + DRM_DEBUG_KMS("Port %c has invalid DDC pin %d, " + "sticking to defaults\n", + port_name(port), ddc_pin); + } + } + + if (is_dp) { + info->alternate_aux_channel = child->aux_channel; + + sanitize_aux_ch(dev_priv, port); + } + + if (bdb_version >= 158) { + /* The VBT HDMI level shift values match the table we have. */ + u8 hdmi_level_shift = child->hdmi_level_shifter_value; + DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n", + port_name(port), + hdmi_level_shift); + info->hdmi_level_shift = hdmi_level_shift; + } + + if (bdb_version >= 204) { + int max_tmds_clock; + + switch (child->hdmi_max_data_rate) { + default: + MISSING_CASE(child->hdmi_max_data_rate); + /* fall through */ + case HDMI_MAX_DATA_RATE_PLATFORM: + max_tmds_clock = 0; + break; + case HDMI_MAX_DATA_RATE_297: + max_tmds_clock = 297000; + break; + case HDMI_MAX_DATA_RATE_165: + max_tmds_clock = 165000; + break; + } + + if (max_tmds_clock) + DRM_DEBUG_KMS("VBT HDMI max TMDS clock for port %c: %d kHz\n", + port_name(port), max_tmds_clock); + info->max_tmds_clock = max_tmds_clock; + } + + /* Parse the I_boost config for SKL and above */ + if (bdb_version >= 196 && child->iboost) { + info->dp_boost_level = translate_iboost(child->dp_iboost_level); + DRM_DEBUG_KMS("VBT (e)DP boost level for port %c: %d\n", + port_name(port), info->dp_boost_level); + info->hdmi_boost_level = translate_iboost(child->hdmi_iboost_level); + DRM_DEBUG_KMS("VBT HDMI boost level for port %c: %d\n", + port_name(port), info->hdmi_boost_level); + } + + /* DP max link rate for CNL+ */ + if (bdb_version >= 216) { + switch (child->dp_max_link_rate) { + default: + case VBT_DP_MAX_LINK_RATE_HBR3: + info->dp_max_link_rate = 810000; + break; + case VBT_DP_MAX_LINK_RATE_HBR2: + info->dp_max_link_rate = 540000; + break; + case VBT_DP_MAX_LINK_RATE_HBR: + info->dp_max_link_rate = 270000; + break; + case VBT_DP_MAX_LINK_RATE_LBR: + info->dp_max_link_rate = 162000; + break; + } + DRM_DEBUG_KMS("VBT DP max link rate for port %c: %d\n", + port_name(port), info->dp_max_link_rate); + } + + info->child = child; +} + +static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version) +{ + const struct child_device_config *child; + int i; + + if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv)) + return; + + if (bdb_version < 155) + return; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + parse_ddi_port(dev_priv, child, bdb_version); + } +} + +static void +parse_general_definitions(struct drm_i915_private *dev_priv, + const struct bdb_header *bdb) +{ + const struct bdb_general_definitions *defs; + const struct child_device_config *child; + int i, child_device_num, count; + u8 expected_size; + u16 block_size; + int bus_pin; + + defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); + if (!defs) { + DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n"); + return; + } + + block_size = get_blocksize(defs); + if (block_size < sizeof(*defs)) { + DRM_DEBUG_KMS("General definitions block too small (%u)\n", + block_size); + return; + } + + bus_pin = defs->crt_ddc_gmbus_pin; + DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin); + if (intel_gmbus_is_valid_pin(dev_priv, bus_pin)) + dev_priv->vbt.crt_ddc_pin = bus_pin; + + if (bdb->version < 106) { + expected_size = 22; + } else if (bdb->version < 111) { + expected_size = 27; + } else if (bdb->version < 195) { + expected_size = LEGACY_CHILD_DEVICE_CONFIG_SIZE; + } else if (bdb->version == 195) { + expected_size = 37; + } else if (bdb->version <= 215) { + expected_size = 38; + } else if (bdb->version <= 216) { + expected_size = 39; + } else { + expected_size = sizeof(*child); + BUILD_BUG_ON(sizeof(*child) < 39); + DRM_DEBUG_DRIVER("Expected child device config size for VBT version %u not known; assuming %u\n", + bdb->version, expected_size); + } + + /* Flag an error for unexpected size, but continue anyway. */ + if (defs->child_dev_size != expected_size) + DRM_ERROR("Unexpected child device config size %u (expected %u for VBT version %u)\n", + defs->child_dev_size, expected_size, bdb->version); + + /* The legacy sized child device config is the minimum we need. */ + if (defs->child_dev_size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) { + DRM_DEBUG_KMS("Child device config size %u is too small.\n", + defs->child_dev_size); + return; + } + + /* get the number of child device */ + child_device_num = (block_size - sizeof(*defs)) / defs->child_dev_size; + count = 0; + /* get the number of child device that is present */ + for (i = 0; i < child_device_num; i++) { + child = child_device_ptr(defs, i); + if (!child->device_type) + continue; + count++; + } + if (!count) { + DRM_DEBUG_KMS("no child dev is parsed from VBT\n"); + return; + } + dev_priv->vbt.child_dev = kcalloc(count, sizeof(*child), GFP_KERNEL); + if (!dev_priv->vbt.child_dev) { + DRM_DEBUG_KMS("No memory space for child device\n"); + return; + } + + dev_priv->vbt.child_dev_num = count; + count = 0; + for (i = 0; i < child_device_num; i++) { + child = child_device_ptr(defs, i); + if (!child->device_type) + continue; + + /* + * Copy as much as we know (sizeof) and is available + * (child_dev_size) of the child device. Accessing the data must + * depend on VBT version. + */ + memcpy(dev_priv->vbt.child_dev + count, child, + min_t(size_t, defs->child_dev_size, sizeof(*child))); + count++; + } +} + +/* Common defaults which may be overridden by VBT. */ +static void +init_vbt_defaults(struct drm_i915_private *dev_priv) +{ + enum port port; + + dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC; + + /* Default to having backlight */ + dev_priv->vbt.backlight.present = true; + + /* LFP panel data */ + dev_priv->vbt.lvds_dither = 1; + + /* SDVO panel data */ + dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; + + /* general features */ + dev_priv->vbt.int_tv_support = 1; + dev_priv->vbt.int_crt_support = 1; + + /* driver features */ + dev_priv->vbt.int_lvds_support = 1; + + /* Default to using SSC */ + dev_priv->vbt.lvds_use_ssc = 1; + /* + * Core/SandyBridge/IvyBridge use alternative (120MHz) reference + * clock for LVDS. + */ + dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv, + !HAS_PCH_SPLIT(dev_priv)); + DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq); + + for (port = PORT_A; port < I915_MAX_PORTS; port++) { + struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + + info->hdmi_level_shift = HDMI_LEVEL_SHIFT_UNKNOWN; + } +} + +/* Defaults to initialize only if there is no VBT. */ +static void +init_vbt_missing_defaults(struct drm_i915_private *dev_priv) +{ + enum port port; + + for (port = PORT_A; port < I915_MAX_PORTS; port++) { + struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + + /* + * VBT has the TypeC mode (native,TBT/USB) and we don't want + * to detect it. + */ + if (intel_port_is_tc(dev_priv, port)) + continue; + + info->supports_dvi = (port != PORT_A && port != PORT_E); + info->supports_hdmi = info->supports_dvi; + info->supports_dp = (port != PORT_E); + info->supports_edp = (port == PORT_A); + } +} + +static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt) +{ + const void *_vbt = vbt; + + return _vbt + vbt->bdb_offset; +} + +/** + * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT + * @buf: pointer to a buffer to validate + * @size: size of the buffer + * + * Returns true on valid VBT. + */ +bool intel_bios_is_valid_vbt(const void *buf, size_t size) +{ + const struct vbt_header *vbt = buf; + const struct bdb_header *bdb; + + if (!vbt) + return false; + + if (sizeof(struct vbt_header) > size) { + DRM_DEBUG_DRIVER("VBT header incomplete\n"); + return false; + } + + if (memcmp(vbt->signature, "$VBT", 4)) { + DRM_DEBUG_DRIVER("VBT invalid signature\n"); + return false; + } + + if (range_overflows_t(size_t, + vbt->bdb_offset, + sizeof(struct bdb_header), + size)) { + DRM_DEBUG_DRIVER("BDB header incomplete\n"); + return false; + } + + bdb = get_bdb_header(vbt); + if (range_overflows_t(size_t, vbt->bdb_offset, bdb->bdb_size, size)) { + DRM_DEBUG_DRIVER("BDB incomplete\n"); + return false; + } + + return vbt; +} + +static const struct vbt_header *find_vbt(void __iomem *bios, size_t size) +{ + size_t i; + + /* Scour memory looking for the VBT signature. */ + for (i = 0; i + 4 < size; i++) { + void *vbt; + + if (ioread32(bios + i) != *((const u32 *) "$VBT")) + continue; + + /* + * This is the one place where we explicitly discard the address + * space (__iomem) of the BIOS/VBT. + */ + vbt = (void __force *) bios + i; + if (intel_bios_is_valid_vbt(vbt, size - i)) + return vbt; + + break; + } + + return NULL; +} + +/** + * intel_bios_init - find VBT and initialize settings from the BIOS + * @dev_priv: i915 device instance + * + * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT + * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also + * initialize some defaults if the VBT is not present at all. + */ +void intel_bios_init(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + const struct vbt_header *vbt = dev_priv->opregion.vbt; + const struct bdb_header *bdb; + u8 __iomem *bios = NULL; + + if (!HAS_DISPLAY(dev_priv)) { + DRM_DEBUG_KMS("Skipping VBT init due to disabled display.\n"); + return; + } + + init_vbt_defaults(dev_priv); + + /* If the OpRegion does not have VBT, look in PCI ROM. */ + if (!vbt) { + size_t size; + + bios = pci_map_rom(pdev, &size); + if (!bios) + goto out; + + vbt = find_vbt(bios, size); + if (!vbt) + goto out; + + DRM_DEBUG_KMS("Found valid VBT in PCI ROM\n"); + } + + bdb = get_bdb_header(vbt); + + DRM_DEBUG_KMS("VBT signature \"%.*s\", BDB version %d\n", + (int)sizeof(vbt->signature), vbt->signature, bdb->version); + + /* Grab useful general definitions */ + parse_general_features(dev_priv, bdb); + parse_general_definitions(dev_priv, bdb); + parse_lfp_panel_data(dev_priv, bdb); + parse_lfp_backlight(dev_priv, bdb); + parse_sdvo_panel_data(dev_priv, bdb); + parse_driver_features(dev_priv, bdb); + parse_edp(dev_priv, bdb); + parse_psr(dev_priv, bdb); + parse_mipi_config(dev_priv, bdb); + parse_mipi_sequence(dev_priv, bdb); + + /* Further processing on pre-parsed data */ + parse_sdvo_device_mapping(dev_priv, bdb->version); + parse_ddi_ports(dev_priv, bdb->version); + +out: + if (!vbt) { + DRM_INFO("Failed to find VBIOS tables (VBT)\n"); + init_vbt_missing_defaults(dev_priv); + } + + if (bios) + pci_unmap_rom(pdev, bios); +} + +/** + * intel_bios_cleanup - Free any resources allocated by intel_bios_init() + * @dev_priv: i915 device instance + */ +void intel_bios_cleanup(struct drm_i915_private *dev_priv) +{ + kfree(dev_priv->vbt.child_dev); + dev_priv->vbt.child_dev = NULL; + dev_priv->vbt.child_dev_num = 0; + kfree(dev_priv->vbt.sdvo_lvds_vbt_mode); + dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; + kfree(dev_priv->vbt.lfp_lvds_vbt_mode); + dev_priv->vbt.lfp_lvds_vbt_mode = NULL; + kfree(dev_priv->vbt.dsi.data); + dev_priv->vbt.dsi.data = NULL; + kfree(dev_priv->vbt.dsi.pps); + dev_priv->vbt.dsi.pps = NULL; + kfree(dev_priv->vbt.dsi.config); + dev_priv->vbt.dsi.config = NULL; + kfree(dev_priv->vbt.dsi.deassert_seq); + dev_priv->vbt.dsi.deassert_seq = NULL; +} + +/** + * intel_bios_is_tv_present - is integrated TV present in VBT + * @dev_priv: i915 device instance + * + * Return true if TV is present. If no child devices were parsed from VBT, + * assume TV is present. + */ +bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv) +{ + const struct child_device_config *child; + int i; + + if (!dev_priv->vbt.int_tv_support) + return false; + + if (!dev_priv->vbt.child_dev_num) + return true; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + /* + * If the device type is not TV, continue. + */ + switch (child->device_type) { + case DEVICE_TYPE_INT_TV: + case DEVICE_TYPE_TV: + case DEVICE_TYPE_TV_SVIDEO_COMPOSITE: + break; + default: + continue; + } + /* Only when the addin_offset is non-zero, it is regarded + * as present. + */ + if (child->addin_offset) + return true; + } + + return false; +} + +/** + * intel_bios_is_lvds_present - is LVDS present in VBT + * @dev_priv: i915 device instance + * @i2c_pin: i2c pin for LVDS if present + * + * Return true if LVDS is present. If no child devices were parsed from VBT, + * assume LVDS is present. + */ +bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin) +{ + const struct child_device_config *child; + int i; + + if (!dev_priv->vbt.child_dev_num) + return true; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + /* If the device type is not LFP, continue. + * We have to check both the new identifiers as well as the + * old for compatibility with some BIOSes. + */ + if (child->device_type != DEVICE_TYPE_INT_LFP && + child->device_type != DEVICE_TYPE_LFP) + continue; + + if (intel_gmbus_is_valid_pin(dev_priv, child->i2c_pin)) + *i2c_pin = child->i2c_pin; + + /* However, we cannot trust the BIOS writers to populate + * the VBT correctly. Since LVDS requires additional + * information from AIM blocks, a non-zero addin offset is + * a good indicator that the LVDS is actually present. + */ + if (child->addin_offset) + return true; + + /* But even then some BIOS writers perform some black magic + * and instantiate the device without reference to any + * additional data. Trust that if the VBT was written into + * the OpRegion then they have validated the LVDS's existence. + */ + if (dev_priv->opregion.vbt) + return true; + } + + return false; +} + +/** + * intel_bios_is_port_present - is the specified digital port present + * @dev_priv: i915 device instance + * @port: port to check + * + * Return true if the device in %port is present. + */ +bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port) +{ + const struct child_device_config *child; + static const struct { + u16 dp, hdmi; + } port_mapping[] = { + [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, + [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, + [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, + [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, + [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, }, + }; + int i; + + if (HAS_DDI(dev_priv)) { + const struct ddi_vbt_port_info *port_info = + &dev_priv->vbt.ddi_port_info[port]; + + return port_info->supports_dp || + port_info->supports_dvi || + port_info->supports_hdmi; + } + + /* FIXME maybe deal with port A as well? */ + if (WARN_ON(port == PORT_A) || port >= ARRAY_SIZE(port_mapping)) + return false; + + if (!dev_priv->vbt.child_dev_num) + return false; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + if ((child->dvo_port == port_mapping[port].dp || + child->dvo_port == port_mapping[port].hdmi) && + (child->device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING | + DEVICE_TYPE_DISPLAYPORT_OUTPUT))) + return true; + } + + return false; +} + +/** + * intel_bios_is_port_edp - is the device in given port eDP + * @dev_priv: i915 device instance + * @port: port to check + * + * Return true if the device in %port is eDP. + */ +bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port) +{ + const struct child_device_config *child; + static const short port_mapping[] = { + [PORT_B] = DVO_PORT_DPB, + [PORT_C] = DVO_PORT_DPC, + [PORT_D] = DVO_PORT_DPD, + [PORT_E] = DVO_PORT_DPE, + [PORT_F] = DVO_PORT_DPF, + }; + int i; + + if (HAS_DDI(dev_priv)) + return dev_priv->vbt.ddi_port_info[port].supports_edp; + + if (!dev_priv->vbt.child_dev_num) + return false; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + if (child->dvo_port == port_mapping[port] && + (child->device_type & DEVICE_TYPE_eDP_BITS) == + (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) + return true; + } + + return false; +} + +static bool child_dev_is_dp_dual_mode(const struct child_device_config *child, + enum port port) +{ + static const struct { + u16 dp, hdmi; + } port_mapping[] = { + /* + * Buggy VBTs may declare DP ports as having + * HDMI type dvo_port :( So let's check both. + */ + [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, + [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, + [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, + [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, + [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, }, + }; + + if (port == PORT_A || port >= ARRAY_SIZE(port_mapping)) + return false; + + if ((child->device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) != + (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) + return false; + + if (child->dvo_port == port_mapping[port].dp) + return true; + + /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */ + if (child->dvo_port == port_mapping[port].hdmi && + child->aux_channel != 0) + return true; + + return false; +} + +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct child_device_config *child; + int i; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + if (child_dev_is_dp_dual_mode(child, port)) + return true; + } + + return false; +} + +/** + * intel_bios_is_dsi_present - is DSI present in VBT + * @dev_priv: i915 device instance + * @port: port for DSI if present + * + * Return true if DSI is present, and return the port in %port. + */ +bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, + enum port *port) +{ + const struct child_device_config *child; + u8 dvo_port; + int i; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + + if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT)) + continue; + + dvo_port = child->dvo_port; + + if (dvo_port == DVO_PORT_MIPIA || + (dvo_port == DVO_PORT_MIPIB && INTEL_GEN(dev_priv) >= 11) || + (dvo_port == DVO_PORT_MIPIC && INTEL_GEN(dev_priv) < 11)) { + if (port) + *port = dvo_port - DVO_PORT_MIPIA; + return true; + } else if (dvo_port == DVO_PORT_MIPIB || + dvo_port == DVO_PORT_MIPIC || + dvo_port == DVO_PORT_MIPID) { + DRM_DEBUG_KMS("VBT has unsupported DSI port %c\n", + port_name(dvo_port - DVO_PORT_MIPIA)); + } + } + + return false; +} + +/** + * intel_bios_is_port_hpd_inverted - is HPD inverted for %port + * @i915: i915 device instance + * @port: port to check + * + * Return true if HPD should be inverted for %port. + */ +bool +intel_bios_is_port_hpd_inverted(const struct drm_i915_private *i915, + enum port port) +{ + const struct child_device_config *child = + i915->vbt.ddi_port_info[port].child; + + if (WARN_ON_ONCE(!IS_GEN9_LP(i915))) + return false; + + return child && child->hpd_invert; +} + +/** + * intel_bios_is_lspcon_present - if LSPCON is attached on %port + * @i915: i915 device instance + * @port: port to check + * + * Return true if LSPCON is present on this port + */ +bool +intel_bios_is_lspcon_present(const struct drm_i915_private *i915, + enum port port) +{ + const struct child_device_config *child = + i915->vbt.ddi_port_info[port].child; + + return HAS_LSPCON(i915) && child && child->lspcon; +} + +enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum aux_ch aux_ch; + + if (!info->alternate_aux_channel) { + aux_ch = (enum aux_ch)port; + + DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n", + aux_ch_name(aux_ch), port_name(port)); + return aux_ch; + } + + switch (info->alternate_aux_channel) { + case DP_AUX_A: + aux_ch = AUX_CH_A; + break; + case DP_AUX_B: + aux_ch = AUX_CH_B; + break; + case DP_AUX_C: + aux_ch = AUX_CH_C; + break; + case DP_AUX_D: + aux_ch = AUX_CH_D; + break; + case DP_AUX_E: + aux_ch = AUX_CH_E; + break; + case DP_AUX_F: + aux_ch = AUX_CH_F; + break; + default: + MISSING_CASE(info->alternate_aux_channel); + aux_ch = AUX_CH_A; + break; + } + + DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n", + aux_ch_name(aux_ch), port_name(port)); + + return aux_ch; +} |