diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_display_types.h')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_display_types.h | 64 |
1 files changed, 52 insertions, 12 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index 449abaea619f..1a7334dbe802 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -128,7 +128,8 @@ struct intel_encoder { enum intel_output_type type; enum port port; - unsigned int cloneable; + u16 cloneable; + u8 pipe_mask; enum intel_hotplug_state (*hotplug)(struct intel_encoder *encoder, struct intel_connector *connector, bool irq_received); @@ -187,7 +188,6 @@ struct intel_encoder { * device interrupts are disabled. */ void (*suspend)(struct intel_encoder *); - int crtc_mask; enum hpd_pin hpd_pin; enum intel_display_power_domain power_domain; /* for communication with audio component; protected by av_mutex */ @@ -388,6 +388,13 @@ struct intel_hdcp { wait_queue_head_t cp_irq_queue; atomic_t cp_irq_count; int cp_irq_count_cached; + + /* + * HDCP register access for gen12+ need the transcoder associated. + * Transcoder attached to the connector could be changed at modeset. + * Hence caching the transcoder here. + */ + enum transcoder cpu_transcoder; }; struct intel_connector { @@ -481,9 +488,9 @@ struct intel_atomic_state { * but the converse is not necessarily true; simply changing a mode may * not flip the final active status of any CRTC's */ - unsigned int active_pipe_changes; + u8 active_pipe_changes; - unsigned int active_crtcs; + u8 active_pipes; /* minimum acceptable cdclk for each pipe */ int min_cdclk[I915_MAX_PIPES]; /* minimum acceptable voltage level for each pipe */ @@ -499,6 +506,14 @@ struct intel_atomic_state { bool rps_interactive; + /* + * active_pipes + * min_cdclk[] + * min_voltage_level[] + * cdclk.* + */ + bool global_state_changed; + /* Gen9+ only */ struct skl_ddb_values wm_results; @@ -552,24 +567,24 @@ struct intel_plane_state { int scaler_id; /* - * linked_plane: + * planar_linked_plane: * * ICL planar formats require 2 planes that are updated as pairs. * This member is used to make sure the other plane is also updated * when required, and for update_slave() to find the correct * plane_state to pass as argument. */ - struct intel_plane *linked_plane; + struct intel_plane *planar_linked_plane; /* - * slave: + * planar_slave: * If set don't update use the linked plane's state for updating * this plane during atomic commit with the update_slave() callback. * * It's also used by the watermark code to ignore wm calculations on * this plane. They're calculated by the linked plane's wm code. */ - u32 slave; + u32 planar_slave; struct drm_intel_sprite_colorkey ckey; }; @@ -759,8 +774,8 @@ struct intel_crtc_state { bool update_pipe; /* can a fast modeset be performed? */ bool disable_cxsr; bool update_wm_pre, update_wm_post; /* watermarks are updated */ - bool fb_changed; /* fb on any of the planes is changed */ bool fifo_changed; /* FIFO split is changed */ + bool preload_luts; /* Pipe source size (ie. panel fitter input size) * All planes will be positioned inside this space, @@ -864,6 +879,7 @@ struct intel_crtc_state { bool has_psr; bool has_psr2; + u32 dc3co_exitline; /* * Frequence the dpll for the port should run at. Differs from the @@ -925,6 +941,8 @@ struct intel_crtc_state { struct intel_crtc_wm_state wm; + int min_cdclk[I915_MAX_PLANES]; + u32 data_rate[I915_MAX_PLANES]; /* Gamma mode programmed on the pipe */ @@ -979,11 +997,17 @@ struct intel_crtc_state { bool dsc_split; u16 compressed_bpp; u8 slice_count; - } dsc_params; - struct drm_dsc_config dp_dsc_cfg; + struct drm_dsc_config config; + } dsc; /* Forward Error correction State */ bool fec_enable; + + /* Pointer to master transcoder in case of tiled displays */ + enum transcoder master_transcoder; + + /* Bitmask to indicate slaves attached */ + u8 sync_mode_slaves_mask; }; struct intel_crtc { @@ -1026,6 +1050,9 @@ struct intel_crtc { /* scalers available on this crtc */ int num_scalers; + + /* per pipe DSB related info */ + struct intel_dsb dsb; }; struct intel_plane { @@ -1061,6 +1088,8 @@ struct intel_plane { bool (*get_hw_state)(struct intel_plane *plane, enum pipe *pipe); int (*check_plane)(struct intel_crtc_state *crtc_state, struct intel_plane_state *plane_state); + int (*min_cdclk)(const struct intel_crtc_state *crtc_state, + const struct intel_plane_state *plane_state); }; struct intel_watermark_params { @@ -1176,6 +1205,7 @@ struct intel_dp { /* sink or branch descriptor */ struct drm_dp_desc desc; struct drm_dp_aux aux; + u32 aux_busy_last_status; u8 train_set[4]; int panel_power_up_delay; int panel_power_down_delay; @@ -1211,6 +1241,15 @@ struct intel_dp { bool can_mst; /* this port supports mst */ bool is_mst; int active_mst_links; + + /* + * DP_TP_* registers may be either on port or transcoder register space. + */ + struct { + i915_reg_t dp_tp_ctl; + i915_reg_t dp_tp_status; + } regs; + /* connector directly attached - won't be use for modeset in mst world */ struct intel_connector *attached_connector; @@ -1269,6 +1308,7 @@ struct intel_digital_port { char tc_port_name[8]; enum tc_port_mode tc_mode; enum phy_fia tc_phy_fia; + u8 tc_phy_fia_idx; void (*write_infoframe)(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, @@ -1509,7 +1549,7 @@ intel_wait_for_vblank(struct drm_i915_private *dev_priv, enum pipe pipe) drm_wait_one_vblank(&dev_priv->drm, pipe); } static inline void -intel_wait_for_vblank_if_active(struct drm_i915_private *dev_priv, int pipe) +intel_wait_for_vblank_if_active(struct drm_i915_private *dev_priv, enum pipe pipe) { const struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |