1 files changed, 673 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
new file mode 100644
index 000000000000..e5b178660408
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
@@ -0,0 +1,673 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Shobhit Kumar <shobhit.kumar@intel.com>
+ *
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/slab.h>
+
+#include <asm/intel-mid.h>
+#include <asm/unaligned.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include <drm/i915_drm.h>
+
+#include <video/mipi_display.h>
+
+#include "i915_drv.h"
+#include "intel_drv.h"
+#include "intel_dsi.h"
+#include "intel_sideband.h"
+
+#define MIPI_TRANSFER_MODE_SHIFT	0
+#define MIPI_VIRTUAL_CHANNEL_SHIFT	1
+#define MIPI_PORT_SHIFT			3
+
+/* base offsets for gpio pads */
+#define VLV_GPIO_NC_0_HV_DDI0_HPD	0x4130
+#define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA	0x4120
+#define VLV_GPIO_NC_2_HV_DDI0_DDC_SCL	0x4110
+#define VLV_GPIO_NC_3_PANEL0_VDDEN	0x4140
+#define VLV_GPIO_NC_4_PANEL0_BKLTEN	0x4150
+#define VLV_GPIO_NC_5_PANEL0_BKLTCTL	0x4160
+#define VLV_GPIO_NC_6_HV_DDI1_HPD	0x4180
+#define VLV_GPIO_NC_7_HV_DDI1_DDC_SDA	0x4190
+#define VLV_GPIO_NC_8_HV_DDI1_DDC_SCL	0x4170
+#define VLV_GPIO_NC_9_PANEL1_VDDEN	0x4100
+#define VLV_GPIO_NC_10_PANEL1_BKLTEN	0x40E0
+#define VLV_GPIO_NC_11_PANEL1_BKLTCTL	0x40F0
+
+#define VLV_GPIO_PCONF0(base_offset)	(base_offset)
+#define VLV_GPIO_PAD_VAL(base_offset)	((base_offset) + 8)
+
+struct gpio_map {
+	u16 base_offset;
+	bool init;
+};
+
+static struct gpio_map vlv_gpio_table[] = {
+	{ VLV_GPIO_NC_0_HV_DDI0_HPD },
+	{ VLV_GPIO_NC_1_HV_DDI0_DDC_SDA },
+	{ VLV_GPIO_NC_2_HV_DDI0_DDC_SCL },
+	{ VLV_GPIO_NC_3_PANEL0_VDDEN },
+	{ VLV_GPIO_NC_4_PANEL0_BKLTEN },
+	{ VLV_GPIO_NC_5_PANEL0_BKLTCTL },
+	{ VLV_GPIO_NC_6_HV_DDI1_HPD },
+	{ VLV_GPIO_NC_7_HV_DDI1_DDC_SDA },
+	{ VLV_GPIO_NC_8_HV_DDI1_DDC_SCL },
+	{ VLV_GPIO_NC_9_PANEL1_VDDEN },
+	{ VLV_GPIO_NC_10_PANEL1_BKLTEN },
+	{ VLV_GPIO_NC_11_PANEL1_BKLTCTL },
+};
+
+#define CHV_GPIO_IDX_START_N		0
+#define CHV_GPIO_IDX_START_E		73
+#define CHV_GPIO_IDX_START_SW		100
+#define CHV_GPIO_IDX_START_SE		198
+
+#define CHV_VBT_MAX_PINS_PER_FMLY	15
+
+#define CHV_GPIO_PAD_CFG0(f, i)		(0x4400 + (f) * 0x400 + (i) * 8)
+#define  CHV_GPIO_GPIOEN		(1 << 15)
+#define  CHV_GPIO_GPIOCFG_GPIO		(0 << 8)
+#define  CHV_GPIO_GPIOCFG_GPO		(1 << 8)
+#define  CHV_GPIO_GPIOCFG_GPI		(2 << 8)
+#define  CHV_GPIO_GPIOCFG_HIZ		(3 << 8)
+#define  CHV_GPIO_GPIOTXSTATE(state)	((!!(state)) << 1)
+
+#define CHV_GPIO_PAD_CFG1(f, i)		(0x4400 + (f) * 0x400 + (i) * 8 + 4)
+#define  CHV_GPIO_CFGLOCK		(1 << 31)
+
+/* ICL DSI Display GPIO Pins */
+#define  ICL_GPIO_DDSP_HPD_A		0
+#define  ICL_GPIO_L_VDDEN_1		1
+#define  ICL_GPIO_L_BKLTEN_1		2
+#define  ICL_GPIO_DDPA_CTRLCLK_1	3
+#define  ICL_GPIO_DDPA_CTRLDATA_1	4
+#define  ICL_GPIO_DDSP_HPD_B		5
+#define  ICL_GPIO_L_VDDEN_2		6
+#define  ICL_GPIO_L_BKLTEN_2		7
+#define  ICL_GPIO_DDPA_CTRLCLK_2	8
+#define  ICL_GPIO_DDPA_CTRLDATA_2	9
+
+static inline enum port intel_dsi_seq_port_to_port(u8 port)
+{
+	return port ? PORT_C : PORT_A;
+}
+
+static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
+				       const u8 *data)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
+	struct mipi_dsi_device *dsi_device;
+	u8 type, flags, seq_port;
+	u16 len;
+	enum port port;
+
+	DRM_DEBUG_KMS("\n");
+
+	flags = *data++;
+	type = *data++;
+
+	len = *((u16 *) data);
+	data += 2;
+
+	seq_port = (flags >> MIPI_PORT_SHIFT) & 3;
+
+	/* For DSI single link on Port A & C, the seq_port value which is
+	 * parsed from Sequence Block#53 of VBT has been set to 0
+	 * Now, read/write of packets for the DSI single link on Port A and
+	 * Port C will based on the DVO port from VBT block 2.
+	 */
+	if (intel_dsi->ports == (1 << PORT_C))
+		port = PORT_C;
+	else
+		port = intel_dsi_seq_port_to_port(seq_port);
+
+	dsi_device = intel_dsi->dsi_hosts[port]->device;
+	if (!dsi_device) {
+		DRM_DEBUG_KMS("no dsi device for port %c\n", port_name(port));
+		goto out;
+	}
+
+	if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1)
+		dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
+	else
+		dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3;
+
+	switch (type) {
+	case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+		mipi_dsi_generic_write(dsi_device, NULL, 0);
+		break;
+	case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+		mipi_dsi_generic_write(dsi_device, data, 1);
+		break;
+	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+		mipi_dsi_generic_write(dsi_device, data, 2);
+		break;
+	case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+		DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n");
+		break;
+	case MIPI_DSI_GENERIC_LONG_WRITE:
+		mipi_dsi_generic_write(dsi_device, data, len);
+		break;
+	case MIPI_DSI_DCS_SHORT_WRITE:
+		mipi_dsi_dcs_write_buffer(dsi_device, data, 1);
+		break;
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+		mipi_dsi_dcs_write_buffer(dsi_device, data, 2);
+		break;
+	case MIPI_DSI_DCS_READ:
+		DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n");
+		break;
+	case MIPI_DSI_DCS_LONG_WRITE:
+		mipi_dsi_dcs_write_buffer(dsi_device, data, len);
+		break;
+	}
+
+	if (INTEL_GEN(dev_priv) < 11)
+		vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
+
+out:
+	data += len;
+
+	return data;
+}
+
+static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
+{
+	u32 delay = *((const u32 *) data);
+
+	DRM_DEBUG_KMS("\n");
+
+	usleep_range(delay, delay + 10);
+	data += 4;
+
+	return data;
+}
+
+static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
+			  u8 gpio_source, u8 gpio_index, bool value)
+{
+	struct gpio_map *map;
+	u16 pconf0, padval;
+	u32 tmp;
+	u8 port;
+
+	if (gpio_index >= ARRAY_SIZE(vlv_gpio_table)) {
+		DRM_DEBUG_KMS("unknown gpio index %u\n", gpio_index);
+		return;
+	}
+
+	map = &vlv_gpio_table[gpio_index];
+
+	if (dev_priv->vbt.dsi.seq_version >= 3) {
+		/* XXX: this assumes vlv_gpio_table only has NC GPIOs. */
+		port = IOSF_PORT_GPIO_NC;
+	} else {
+		if (gpio_source == 0) {
+			port = IOSF_PORT_GPIO_NC;
+		} else if (gpio_source == 1) {
+			DRM_DEBUG_KMS("SC gpio not supported\n");
+			return;
+		} else {
+			DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
+			return;
+		}
+	}
+
+	pconf0 = VLV_GPIO_PCONF0(map->base_offset);
+	padval = VLV_GPIO_PAD_VAL(map->base_offset);
+
+	vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
+	if (!map->init) {
+		/* FIXME: remove constant below */
+		vlv_iosf_sb_write(dev_priv, port, pconf0, 0x2000CC00);
+		map->init = true;
+	}
+
+	tmp = 0x4 | value;
+	vlv_iosf_sb_write(dev_priv, port, padval, tmp);
+	vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
+}
+
+static void chv_exec_gpio(struct drm_i915_private *dev_priv,
+			  u8 gpio_source, u8 gpio_index, bool value)
+{
+	u16 cfg0, cfg1;
+	u16 family_num;
+	u8 port;
+
+	if (dev_priv->vbt.dsi.seq_version >= 3) {
+		if (gpio_index >= CHV_GPIO_IDX_START_SE) {
+			/* XXX: it's unclear whether 255->57 is part of SE. */
+			gpio_index -= CHV_GPIO_IDX_START_SE;
+			port = CHV_IOSF_PORT_GPIO_SE;
+		} else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
+			gpio_index -= CHV_GPIO_IDX_START_SW;
+			port = CHV_IOSF_PORT_GPIO_SW;
+		} else if (gpio_index >= CHV_GPIO_IDX_START_E) {
+			gpio_index -= CHV_GPIO_IDX_START_E;
+			port = CHV_IOSF_PORT_GPIO_E;
+		} else {
+			port = CHV_IOSF_PORT_GPIO_N;
+		}
+	} else {
+		/* XXX: The spec is unclear about CHV GPIO on seq v2 */
+		if (gpio_source != 0) {
+			DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
+			return;
+		}
+
+		if (gpio_index >= CHV_GPIO_IDX_START_E) {
+			DRM_DEBUG_KMS("invalid gpio index %u for GPIO N\n",
+				      gpio_index);
+			return;
+		}
+
+		port = CHV_IOSF_PORT_GPIO_N;
+	}
+
+	family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
+	gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
+
+	cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
+	cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
+
+	vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
+	vlv_iosf_sb_write(dev_priv, port, cfg1, 0);
+	vlv_iosf_sb_write(dev_priv, port, cfg0,
+			  CHV_GPIO_GPIOEN | CHV_GPIO_GPIOCFG_GPO |
+			  CHV_GPIO_GPIOTXSTATE(value));
+	vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
+}
+
+static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
+			  u8 gpio_source, u8 gpio_index, bool value)
+{
+	/* XXX: this table is a quick ugly hack. */
+	static struct gpio_desc *bxt_gpio_table[U8_MAX + 1];
+	struct gpio_desc *gpio_desc = bxt_gpio_table[gpio_index];
+
+	if (!gpio_desc) {
+		gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev,
+						 NULL, gpio_index,
+						 value ? GPIOD_OUT_LOW :
+						 GPIOD_OUT_HIGH);
+
+		if (IS_ERR_OR_NULL(gpio_desc)) {
+			DRM_ERROR("GPIO index %u request failed (%ld)\n",
+				  gpio_index, PTR_ERR(gpio_desc));
+			return;
+		}
+
+		bxt_gpio_table[gpio_index] = gpio_desc;
+	}
+
+	gpiod_set_value(gpio_desc, value);
+}
+
+static void icl_exec_gpio(struct drm_i915_private *dev_priv,
+			  u8 gpio_source, u8 gpio_index, bool value)
+{
+	DRM_DEBUG_KMS("Skipping ICL GPIO element execution\n");
+}
+
+static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	u8 gpio_source, gpio_index = 0, gpio_number;
+	bool value;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (dev_priv->vbt.dsi.seq_version >= 3)
+		gpio_index = *data++;
+
+	gpio_number = *data++;
+
+	/* gpio source in sequence v2 only */
+	if (dev_priv->vbt.dsi.seq_version == 2)
+		gpio_source = (*data >> 1) & 3;
+	else
+		gpio_source = 0;
+
+	/* pull up/down */
+	value = *data++ & 1;
+
+	if (INTEL_GEN(dev_priv) >= 11)
+		icl_exec_gpio(dev_priv, gpio_source, gpio_index, value);
+	else if (IS_VALLEYVIEW(dev_priv))
+		vlv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
+	else if (IS_CHERRYVIEW(dev_priv))
+		chv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
+	else
+		bxt_exec_gpio(dev_priv, gpio_source, gpio_index, value);
+
+	return data;
+}
+
+static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
+{
+	DRM_DEBUG_KMS("Skipping I2C element execution\n");
+
+	return data + *(data + 6) + 7;
+}
+
+static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
+{
+	DRM_DEBUG_KMS("Skipping SPI element execution\n");
+
+	return data + *(data + 5) + 6;
+}
+
+static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data)
+{
+#ifdef CONFIG_PMIC_OPREGION
+	u32 value, mask, reg_address;
+	u16 i2c_address;
+	int ret;
+
+	/* byte 0 aka PMIC Flag is reserved */
+	i2c_address	= get_unaligned_le16(data + 1);
+	reg_address	= get_unaligned_le32(data + 3);
+	value		= get_unaligned_le32(data + 7);
+	mask		= get_unaligned_le32(data + 11);
+
+	ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address,
+							reg_address,
+							value, mask);
+	if (ret)
+		DRM_ERROR("%s failed, error: %d\n", __func__, ret);
+#else
+	DRM_ERROR("Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n");
+#endif
+
+	return data + 15;
+}
+
+typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi,
+					const u8 *data);
+static const fn_mipi_elem_exec exec_elem[] = {
+	[MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
+	[MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
+	[MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
+	[MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
+	[MIPI_SEQ_ELEM_SPI] = mipi_exec_spi,
+	[MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic,
+};
+
+/*
+ * MIPI Sequence from VBT #53 parsing logic
+ * We have already separated each seqence during bios parsing
+ * Following is generic execution function for any sequence
+ */
+
+static const char * const seq_name[] = {
+	[MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET",
+	[MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP",
+	[MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON",
+	[MIPI_SEQ_DISPLAY_OFF]  = "MIPI_SEQ_DISPLAY_OFF",
+	[MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET",
+	[MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON",
+	[MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF",
+	[MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON",
+	[MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF",
+	[MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON",
+	[MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF",
+};
+
+static const char *sequence_name(enum mipi_seq seq_id)
+{
+	if (seq_id < ARRAY_SIZE(seq_name) && seq_name[seq_id])
+		return seq_name[seq_id];
+	else
+		return "(unknown)";
+}
+
+void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
+				 enum mipi_seq seq_id)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
+	const u8 *data;
+	fn_mipi_elem_exec mipi_elem_exec;
+
+	if (WARN_ON(seq_id >= ARRAY_SIZE(dev_priv->vbt.dsi.sequence)))
+		return;
+
+	data = dev_priv->vbt.dsi.sequence[seq_id];
+	if (!data)
+		return;
+
+	WARN_ON(*data != seq_id);
+
+	DRM_DEBUG_KMS("Starting MIPI sequence %d - %s\n",
+		      seq_id, sequence_name(seq_id));
+
+	/* Skip Sequence Byte. */
+	data++;
+
+	/* Skip Size of Sequence. */
+	if (dev_priv->vbt.dsi.seq_version >= 3)
+		data += 4;
+
+	while (1) {
+		u8 operation_byte = *data++;
+		u8 operation_size = 0;
+
+		if (operation_byte == MIPI_SEQ_ELEM_END)
+			break;
+
+		if (operation_byte < ARRAY_SIZE(exec_elem))
+			mipi_elem_exec = exec_elem[operation_byte];
+		else
+			mipi_elem_exec = NULL;
+
+		/* Size of Operation. */
+		if (dev_priv->vbt.dsi.seq_version >= 3)
+			operation_size = *data++;
+
+		if (mipi_elem_exec) {
+			const u8 *next = data + operation_size;
+
+			data = mipi_elem_exec(intel_dsi, data);
+
+			/* Consistency check if we have size. */
+			if (operation_size && data != next) {
+				DRM_ERROR("Inconsistent operation size\n");
+				return;
+			}
+		} else if (operation_size) {
+			/* We have size, skip. */
+			DRM_DEBUG_KMS("Unsupported MIPI operation byte %u\n",
+				      operation_byte);
+			data += operation_size;
+		} else {
+			/* No size, can't skip without parsing. */
+			DRM_ERROR("Unsupported MIPI operation byte %u\n",
+				  operation_byte);
+			return;
+		}
+	}
+}
+
+void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
+
+	/* For v3 VBTs in vid-mode the delays are part of the VBT sequences */
+	if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3)
+		return;
+
+	msleep(msec);
+}
+
+void intel_dsi_log_params(struct intel_dsi *intel_dsi)
+{
+	DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
+	DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
+	DRM_DEBUG_KMS("Lane count %d\n", intel_dsi->lane_count);
+	DRM_DEBUG_KMS("DPHY param reg 0x%x\n", intel_dsi->dphy_reg);
+	DRM_DEBUG_KMS("Video mode format %s\n",
+		      intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ?
+		      "non-burst with sync pulse" :
+		      intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS ?
+		      "non-burst with sync events" :
+		      intel_dsi->video_mode_format == VIDEO_MODE_BURST ?
+		      "burst" : "<unknown>");
+	DRM_DEBUG_KMS("Burst mode ratio %d\n", intel_dsi->burst_mode_ratio);
+	DRM_DEBUG_KMS("Reset timer %d\n", intel_dsi->rst_timer_val);
+	DRM_DEBUG_KMS("Eot %s\n", enableddisabled(intel_dsi->eotp_pkt));
+	DRM_DEBUG_KMS("Clockstop %s\n", enableddisabled(!intel_dsi->clock_stop));
+	DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
+	if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
+		DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_FRONT_BACK\n");
+	else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT)
+		DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_PIXEL_ALT\n");
+	else
+		DRM_DEBUG_KMS("Dual link: NONE\n");
+	DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format);
+	DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div);
+	DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout);
+	DRM_DEBUG_KMS("Turnaround Timeout 0x%x\n", intel_dsi->turn_arnd_val);
+	DRM_DEBUG_KMS("Init Count 0x%x\n", intel_dsi->init_count);
+	DRM_DEBUG_KMS("HS to LP Count 0x%x\n", intel_dsi->hs_to_lp_count);
+	DRM_DEBUG_KMS("LP Byte Clock %d\n", intel_dsi->lp_byte_clk);
+	DRM_DEBUG_KMS("DBI BW Timer 0x%x\n", intel_dsi->bw_timer);
+	DRM_DEBUG_KMS("LP to HS Clock Count 0x%x\n", intel_dsi->clk_lp_to_hs_count);
+	DRM_DEBUG_KMS("HS to LP Clock Count 0x%x\n", intel_dsi->clk_hs_to_lp_count);
+	DRM_DEBUG_KMS("BTA %s\n",
+			enableddisabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
+}
+
+bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+	struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
+	struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
+	u16 burst_mode_ratio;
+	enum port port;
+
+	DRM_DEBUG_KMS("\n");
+
+	intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
+	intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
+	intel_dsi->lane_count = mipi_config->lane_cnt + 1;
+	intel_dsi->pixel_format =
+			pixel_format_from_register_bits(
+				mipi_config->videomode_color_format << 7);
+
+	intel_dsi->dual_link = mipi_config->dual_link;
+	intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
+	intel_dsi->operation_mode = mipi_config->is_cmd_mode;
+	intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
+	intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
+	intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
+	intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
+	intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
+	intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
+	intel_dsi->init_count = mipi_config->master_init_timer;
+	intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
+	intel_dsi->video_frmt_cfg_bits =
+		mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
+	intel_dsi->bgr_enabled = mipi_config->rgb_flip;
+
+	/* Starting point, adjusted depending on dual link and burst mode */
+	intel_dsi->pclk = mode->clock;
+
+	/* In dual link mode each port needs half of pixel clock */
+	if (intel_dsi->dual_link) {
+		intel_dsi->pclk /= 2;
+
+		/* we can enable pixel_overlap if needed by panel. In this
+		 * case we need to increase the pixelclock for extra pixels
+		 */
+		if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
+			intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
+		}
+	}
+
+	/* Burst Mode Ratio
+	 * Target ddr frequency from VBT / non burst ddr freq
+	 * multiply by 100 to preserve remainder
+	 */
+	if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
+		if (mipi_config->target_burst_mode_freq) {
+			u32 bitrate = intel_dsi_bitrate(intel_dsi);
+
+			/*
+			 * Sometimes the VBT contains a slightly lower clock,
+			 * then the bitrate we have calculated, in this case
+			 * just replace it with the calculated bitrate.
+			 */
+			if (mipi_config->target_burst_mode_freq < bitrate &&
+			    intel_fuzzy_clock_check(
+					mipi_config->target_burst_mode_freq,
+					bitrate))
+				mipi_config->target_burst_mode_freq = bitrate;
+
+			if (mipi_config->target_burst_mode_freq < bitrate) {
+				DRM_ERROR("Burst mode freq is less than computed\n");
+				return false;
+			}
+
+			burst_mode_ratio = DIV_ROUND_UP(
+				mipi_config->target_burst_mode_freq * 100,
+				bitrate);
+
+			intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
+		} else {
+			DRM_ERROR("Burst mode target is not set\n");
+			return false;
+		}
+	} else
+		burst_mode_ratio = 100;
+
+	intel_dsi->burst_mode_ratio = burst_mode_ratio;
+
+	/* delays in VBT are in unit of 100us, so need to convert
+	 * here in ms
+	 * Delay (100us) * 100 /1000 = Delay / 10 (ms) */
+	intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10;
+	intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10;
+	intel_dsi->panel_on_delay = pps->panel_on_delay / 10;
+	intel_dsi->panel_off_delay = pps->panel_off_delay / 10;
+	intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10;
+
+	/* a regular driver would get the device in probe */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device);
+	}
+
+	return true;
+}