diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_ddi.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 1441 |
1 files changed, 237 insertions, 1204 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 62de9f4bce09..01e523df363b 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -315,6 +315,9 @@ static void ddi_get_encoder_port(struct intel_encoder *intel_encoder, *dig_port = enc_to_mst(encoder)->primary; *port = (*dig_port)->port; break; + default: + WARN(1, "Invalid DDI encoder type %d\n", intel_encoder->type); + /* fallthrough and treat as unknown */ case INTEL_OUTPUT_DISPLAYPORT: case INTEL_OUTPUT_EDP: case INTEL_OUTPUT_HDMI: @@ -326,9 +329,6 @@ static void ddi_get_encoder_port(struct intel_encoder *intel_encoder, *dig_port = NULL; *port = PORT_E; break; - default: - WARN(1, "Invalid DDI encoder type %d\n", intel_encoder->type); - break; } } @@ -360,7 +360,7 @@ skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) static const struct ddi_buf_trans * skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) { - if (dev_priv->edp_low_vswing) { + if (dev_priv->vbt.edp.low_vswing) { if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); return skl_y_ddi_translations_edp; @@ -443,9 +443,17 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) } else if (IS_BROADWELL(dev_priv)) { ddi_translations_fdi = bdw_ddi_translations_fdi; ddi_translations_dp = bdw_ddi_translations_dp; - ddi_translations_edp = bdw_ddi_translations_edp; + + if (dev_priv->vbt.edp.low_vswing) { + ddi_translations_edp = bdw_ddi_translations_edp; + n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); + } else { + ddi_translations_edp = bdw_ddi_translations_dp; + n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); + } + ddi_translations_hdmi = bdw_ddi_translations_hdmi; - n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); + n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); hdmi_default_entry = 7; @@ -629,6 +637,10 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) break; } + rx_ctl_val &= ~FDI_RX_ENABLE; + I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); + POSTING_READ(FDI_RX_CTL(PIPE_A)); + temp = I915_READ(DDI_BUF_CTL(PORT_E)); temp &= ~DDI_BUF_CTL_ENABLE; I915_WRITE(DDI_BUF_CTL(PORT_E), temp); @@ -643,10 +655,6 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) intel_wait_ddi_buf_idle(dev_priv, PORT_E); - rx_ctl_val &= ~FDI_RX_ENABLE; - I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); - POSTING_READ(FDI_RX_CTL(PIPE_A)); - /* Reset FDI_RX_MISC pwrdn lanes */ temp = I915_READ(FDI_RX_MISC(PIPE_A)); temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); @@ -724,160 +732,6 @@ intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state) } #define LC_FREQ 2700 -#define LC_FREQ_2K U64_C(LC_FREQ * 2000) - -#define P_MIN 2 -#define P_MAX 64 -#define P_INC 2 - -/* Constraints for PLL good behavior */ -#define REF_MIN 48 -#define REF_MAX 400 -#define VCO_MIN 2400 -#define VCO_MAX 4800 - -#define abs_diff(a, b) ({ \ - typeof(a) __a = (a); \ - typeof(b) __b = (b); \ - (void) (&__a == &__b); \ - __a > __b ? (__a - __b) : (__b - __a); }) - -struct hsw_wrpll_rnp { - unsigned p, n2, r2; -}; - -static unsigned hsw_wrpll_get_budget_for_freq(int clock) -{ - unsigned budget; - - switch (clock) { - case 25175000: - case 25200000: - case 27000000: - case 27027000: - case 37762500: - case 37800000: - case 40500000: - case 40541000: - case 54000000: - case 54054000: - case 59341000: - case 59400000: - case 72000000: - case 74176000: - case 74250000: - case 81000000: - case 81081000: - case 89012000: - case 89100000: - case 108000000: - case 108108000: - case 111264000: - case 111375000: - case 148352000: - case 148500000: - case 162000000: - case 162162000: - case 222525000: - case 222750000: - case 296703000: - case 297000000: - budget = 0; - break; - case 233500000: - case 245250000: - case 247750000: - case 253250000: - case 298000000: - budget = 1500; - break; - case 169128000: - case 169500000: - case 179500000: - case 202000000: - budget = 2000; - break; - case 256250000: - case 262500000: - case 270000000: - case 272500000: - case 273750000: - case 280750000: - case 281250000: - case 286000000: - case 291750000: - budget = 4000; - break; - case 267250000: - case 268500000: - budget = 5000; - break; - default: - budget = 1000; - break; - } - - return budget; -} - -static void hsw_wrpll_update_rnp(uint64_t freq2k, unsigned budget, - unsigned r2, unsigned n2, unsigned p, - struct hsw_wrpll_rnp *best) -{ - uint64_t a, b, c, d, diff, diff_best; - - /* No best (r,n,p) yet */ - if (best->p == 0) { - best->p = p; - best->n2 = n2; - best->r2 = r2; - return; - } - - /* - * Output clock is (LC_FREQ_2K / 2000) * N / (P * R), which compares to - * freq2k. - * - * delta = 1e6 * - * abs(freq2k - (LC_FREQ_2K * n2/(p * r2))) / - * freq2k; - * - * and we would like delta <= budget. - * - * If the discrepancy is above the PPM-based budget, always prefer to - * improve upon the previous solution. However, if you're within the - * budget, try to maximize Ref * VCO, that is N / (P * R^2). - */ - a = freq2k * budget * p * r2; - b = freq2k * budget * best->p * best->r2; - diff = abs_diff(freq2k * p * r2, LC_FREQ_2K * n2); - diff_best = abs_diff(freq2k * best->p * best->r2, - LC_FREQ_2K * best->n2); - c = 1000000 * diff; - d = 1000000 * diff_best; - - if (a < c && b < d) { - /* If both are above the budget, pick the closer */ - if (best->p * best->r2 * diff < p * r2 * diff_best) { - best->p = p; - best->n2 = n2; - best->r2 = r2; - } - } else if (a >= c && b < d) { - /* If A is below the threshold but B is above it? Update. */ - best->p = p; - best->n2 = n2; - best->r2 = r2; - } else if (a >= c && b >= d) { - /* Both are below the limit, so pick the higher n2/(r2*r2) */ - if (n2 * best->r2 * best->r2 > best->n2 * r2 * r2) { - best->p = p; - best->n2 = n2; - best->r2 = r2; - } - } - /* Otherwise a < c && b >= d, do nothing */ -} static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, i915_reg_t reg) @@ -1139,363 +993,20 @@ void intel_ddi_clock_get(struct intel_encoder *encoder, bxt_ddi_clock_get(encoder, pipe_config); } -static void -hsw_ddi_calculate_wrpll(int clock /* in Hz */, - unsigned *r2_out, unsigned *n2_out, unsigned *p_out) -{ - uint64_t freq2k; - unsigned p, n2, r2; - struct hsw_wrpll_rnp best = { 0, 0, 0 }; - unsigned budget; - - freq2k = clock / 100; - - budget = hsw_wrpll_get_budget_for_freq(clock); - - /* Special case handling for 540 pixel clock: bypass WR PLL entirely - * and directly pass the LC PLL to it. */ - if (freq2k == 5400000) { - *n2_out = 2; - *p_out = 1; - *r2_out = 2; - return; - } - - /* - * Ref = LC_FREQ / R, where Ref is the actual reference input seen by - * the WR PLL. - * - * We want R so that REF_MIN <= Ref <= REF_MAX. - * Injecting R2 = 2 * R gives: - * REF_MAX * r2 > LC_FREQ * 2 and - * REF_MIN * r2 < LC_FREQ * 2 - * - * Which means the desired boundaries for r2 are: - * LC_FREQ * 2 / REF_MAX < r2 < LC_FREQ * 2 / REF_MIN - * - */ - for (r2 = LC_FREQ * 2 / REF_MAX + 1; - r2 <= LC_FREQ * 2 / REF_MIN; - r2++) { - - /* - * VCO = N * Ref, that is: VCO = N * LC_FREQ / R - * - * Once again we want VCO_MIN <= VCO <= VCO_MAX. - * Injecting R2 = 2 * R and N2 = 2 * N, we get: - * VCO_MAX * r2 > n2 * LC_FREQ and - * VCO_MIN * r2 < n2 * LC_FREQ) - * - * Which means the desired boundaries for n2 are: - * VCO_MIN * r2 / LC_FREQ < n2 < VCO_MAX * r2 / LC_FREQ - */ - for (n2 = VCO_MIN * r2 / LC_FREQ + 1; - n2 <= VCO_MAX * r2 / LC_FREQ; - n2++) { - - for (p = P_MIN; p <= P_MAX; p += P_INC) - hsw_wrpll_update_rnp(freq2k, budget, - r2, n2, p, &best); - } - } - - *n2_out = best.n2; - *p_out = best.p; - *r2_out = best.r2; -} - static bool hsw_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *intel_encoder) { - int clock = crtc_state->port_clock; - - if (intel_encoder->type == INTEL_OUTPUT_HDMI) { - struct intel_shared_dpll *pll; - uint32_t val; - unsigned p, n2, r2; - - hsw_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p); - - val = WRPLL_PLL_ENABLE | WRPLL_PLL_LCPLL | - WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) | - WRPLL_DIVIDER_POST(p); - - memset(&crtc_state->dpll_hw_state, 0, - sizeof(crtc_state->dpll_hw_state)); - - crtc_state->dpll_hw_state.wrpll = val; - - pll = intel_get_shared_dpll(intel_crtc, crtc_state); - if (pll == NULL) { - DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", - pipe_name(intel_crtc->pipe)); - return false; - } - - crtc_state->ddi_pll_sel = PORT_CLK_SEL_WRPLL(pll->id); - } else if (crtc_state->ddi_pll_sel == PORT_CLK_SEL_SPLL) { - struct drm_atomic_state *state = crtc_state->base.state; - struct intel_shared_dpll_config *spll = - &intel_atomic_get_shared_dpll_state(state)[DPLL_ID_SPLL]; - - if (spll->crtc_mask && - WARN_ON(spll->hw_state.spll != crtc_state->dpll_hw_state.spll)) - return false; - - crtc_state->shared_dpll = DPLL_ID_SPLL; - spll->hw_state.spll = crtc_state->dpll_hw_state.spll; - spll->crtc_mask |= 1 << intel_crtc->pipe; - } - - return true; -} - -struct skl_wrpll_context { - uint64_t min_deviation; /* current minimal deviation */ - uint64_t central_freq; /* chosen central freq */ - uint64_t dco_freq; /* chosen dco freq */ - unsigned int p; /* chosen divider */ -}; - -static void skl_wrpll_context_init(struct skl_wrpll_context *ctx) -{ - memset(ctx, 0, sizeof(*ctx)); - - ctx->min_deviation = U64_MAX; -} - -/* DCO freq must be within +1%/-6% of the DCO central freq */ -#define SKL_DCO_MAX_PDEVIATION 100 -#define SKL_DCO_MAX_NDEVIATION 600 - -static void skl_wrpll_try_divider(struct skl_wrpll_context *ctx, - uint64_t central_freq, - uint64_t dco_freq, - unsigned int divider) -{ - uint64_t deviation; - - deviation = div64_u64(10000 * abs_diff(dco_freq, central_freq), - central_freq); - - /* positive deviation */ - if (dco_freq >= central_freq) { - if (deviation < SKL_DCO_MAX_PDEVIATION && - deviation < ctx->min_deviation) { - ctx->min_deviation = deviation; - ctx->central_freq = central_freq; - ctx->dco_freq = dco_freq; - ctx->p = divider; - } - /* negative deviation */ - } else if (deviation < SKL_DCO_MAX_NDEVIATION && - deviation < ctx->min_deviation) { - ctx->min_deviation = deviation; - ctx->central_freq = central_freq; - ctx->dco_freq = dco_freq; - ctx->p = divider; - } -} - -static void skl_wrpll_get_multipliers(unsigned int p, - unsigned int *p0 /* out */, - unsigned int *p1 /* out */, - unsigned int *p2 /* out */) -{ - /* even dividers */ - if (p % 2 == 0) { - unsigned int half = p / 2; - - if (half == 1 || half == 2 || half == 3 || half == 5) { - *p0 = 2; - *p1 = 1; - *p2 = half; - } else if (half % 2 == 0) { - *p0 = 2; - *p1 = half / 2; - *p2 = 2; - } else if (half % 3 == 0) { - *p0 = 3; - *p1 = half / 3; - *p2 = 2; - } else if (half % 7 == 0) { - *p0 = 7; - *p1 = half / 7; - *p2 = 2; - } - } else if (p == 3 || p == 9) { /* 3, 5, 7, 9, 15, 21, 35 */ - *p0 = 3; - *p1 = 1; - *p2 = p / 3; - } else if (p == 5 || p == 7) { - *p0 = p; - *p1 = 1; - *p2 = 1; - } else if (p == 15) { - *p0 = 3; - *p1 = 1; - *p2 = 5; - } else if (p == 21) { - *p0 = 7; - *p1 = 1; - *p2 = 3; - } else if (p == 35) { - *p0 = 7; - *p1 = 1; - *p2 = 5; - } -} - -struct skl_wrpll_params { - uint32_t dco_fraction; - uint32_t dco_integer; - uint32_t qdiv_ratio; - uint32_t qdiv_mode; - uint32_t kdiv; - uint32_t pdiv; - uint32_t central_freq; -}; - -static void skl_wrpll_params_populate(struct skl_wrpll_params *params, - uint64_t afe_clock, - uint64_t central_freq, - uint32_t p0, uint32_t p1, uint32_t p2) -{ - uint64_t dco_freq; - - switch (central_freq) { - case 9600000000ULL: - params->central_freq = 0; - break; - case 9000000000ULL: - params->central_freq = 1; - break; - case 8400000000ULL: - params->central_freq = 3; - } - - switch (p0) { - case 1: - params->pdiv = 0; - break; - case 2: - params->pdiv = 1; - break; - case 3: - params->pdiv = 2; - break; - case 7: - params->pdiv = 4; - break; - default: - WARN(1, "Incorrect PDiv\n"); - } - - switch (p2) { - case 5: - params->kdiv = 0; - break; - case 2: - params->kdiv = 1; - break; - case 3: - params->kdiv = 2; - break; - case 1: - params->kdiv = 3; - break; - default: - WARN(1, "Incorrect KDiv\n"); - } - - params->qdiv_ratio = p1; - params->qdiv_mode = (params->qdiv_ratio == 1) ? 0 : 1; - - dco_freq = p0 * p1 * p2 * afe_clock; - - /* - * Intermediate values are in Hz. - * Divide by MHz to match bsepc - */ - params->dco_integer = div_u64(dco_freq, 24 * MHz(1)); - params->dco_fraction = - div_u64((div_u64(dco_freq, 24) - - params->dco_integer * MHz(1)) * 0x8000, MHz(1)); -} - -static bool -skl_ddi_calculate_wrpll(int clock /* in Hz */, - struct skl_wrpll_params *wrpll_params) -{ - uint64_t afe_clock = clock * 5; /* AFE Clock is 5x Pixel clock */ - uint64_t dco_central_freq[3] = {8400000000ULL, - 9000000000ULL, - 9600000000ULL}; - static const int even_dividers[] = { 4, 6, 8, 10, 12, 14, 16, 18, 20, - 24, 28, 30, 32, 36, 40, 42, 44, - 48, 52, 54, 56, 60, 64, 66, 68, - 70, 72, 76, 78, 80, 84, 88, 90, - 92, 96, 98 }; - static const int odd_dividers[] = { 3, 5, 7, 9, 15, 21, 35 }; - static const struct { - const int *list; - int n_dividers; - } dividers[] = { - { even_dividers, ARRAY_SIZE(even_dividers) }, - { odd_dividers, ARRAY_SIZE(odd_dividers) }, - }; - struct skl_wrpll_context ctx; - unsigned int dco, d, i; - unsigned int p0, p1, p2; - - skl_wrpll_context_init(&ctx); - - for (d = 0; d < ARRAY_SIZE(dividers); d++) { - for (dco = 0; dco < ARRAY_SIZE(dco_central_freq); dco++) { - for (i = 0; i < dividers[d].n_dividers; i++) { - unsigned int p = dividers[d].list[i]; - uint64_t dco_freq = p * afe_clock; - - skl_wrpll_try_divider(&ctx, - dco_central_freq[dco], - dco_freq, - p); - /* - * Skip the remaining dividers if we're sure to - * have found the definitive divider, we can't - * improve a 0 deviation. - */ - if (ctx.min_deviation == 0) - goto skip_remaining_dividers; - } - } - -skip_remaining_dividers: - /* - * If a solution is found with an even divider, prefer - * this one. - */ - if (d == 0 && ctx.p) - break; - } - - if (!ctx.p) { - DRM_DEBUG_DRIVER("No valid divider found for %dHz\n", clock); - return false; - } + struct intel_shared_dpll *pll; - /* - * gcc incorrectly analyses that these can be used without being - * initialized. To be fair, it's hard to guess. - */ - p0 = p1 = p2 = 0; - skl_wrpll_get_multipliers(ctx.p, &p0, &p1, &p2); - skl_wrpll_params_populate(wrpll_params, afe_clock, ctx.central_freq, - p0, p1, p2); + pll = intel_get_shared_dpll(intel_crtc, crtc_state, + intel_encoder); + if (!pll) + DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", + pipe_name(intel_crtc->pipe)); - return true; + return pll; } static bool @@ -1504,218 +1015,23 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_encoder *intel_encoder) { struct intel_shared_dpll *pll; - uint32_t ctrl1, cfgcr1, cfgcr2; - int clock = crtc_state->port_clock; - /* - * See comment in intel_dpll_hw_state to understand why we always use 0 - * as the DPLL id in this function. - */ - - ctrl1 = DPLL_CTRL1_OVERRIDE(0); - - if (intel_encoder->type == INTEL_OUTPUT_HDMI) { - struct skl_wrpll_params wrpll_params = { 0, }; - - ctrl1 |= DPLL_CTRL1_HDMI_MODE(0); - - if (!skl_ddi_calculate_wrpll(clock * 1000, &wrpll_params)) - return false; - - cfgcr1 = DPLL_CFGCR1_FREQ_ENABLE | - DPLL_CFGCR1_DCO_FRACTION(wrpll_params.dco_fraction) | - wrpll_params.dco_integer; - - cfgcr2 = DPLL_CFGCR2_QDIV_RATIO(wrpll_params.qdiv_ratio) | - DPLL_CFGCR2_QDIV_MODE(wrpll_params.qdiv_mode) | - DPLL_CFGCR2_KDIV(wrpll_params.kdiv) | - DPLL_CFGCR2_PDIV(wrpll_params.pdiv) | - wrpll_params.central_freq; - } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT || - intel_encoder->type == INTEL_OUTPUT_DP_MST) { - switch (crtc_state->port_clock / 2) { - case 81000: - ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0); - break; - case 135000: - ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0); - break; - case 270000: - ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0); - break; - } - - cfgcr1 = cfgcr2 = 0; - } else if (intel_encoder->type == INTEL_OUTPUT_EDP) { - return true; - } else - return false; - - memset(&crtc_state->dpll_hw_state, 0, - sizeof(crtc_state->dpll_hw_state)); - - crtc_state->dpll_hw_state.ctrl1 = ctrl1; - crtc_state->dpll_hw_state.cfgcr1 = cfgcr1; - crtc_state->dpll_hw_state.cfgcr2 = cfgcr2; - - pll = intel_get_shared_dpll(intel_crtc, crtc_state); + pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); if (pll == NULL) { DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", pipe_name(intel_crtc->pipe)); return false; } - /* shared DPLL id 0 is DPLL 1 */ - crtc_state->ddi_pll_sel = pll->id + 1; - return true; } -/* bxt clock parameters */ -struct bxt_clk_div { - int clock; - uint32_t p1; - uint32_t p2; - uint32_t m2_int; - uint32_t m2_frac; - bool m2_frac_en; - uint32_t n; -}; - -/* pre-calculated values for DP linkrates */ -static const struct bxt_clk_div bxt_dp_clk_val[] = { - {162000, 4, 2, 32, 1677722, 1, 1}, - {270000, 4, 1, 27, 0, 0, 1}, - {540000, 2, 1, 27, 0, 0, 1}, - {216000, 3, 2, 32, 1677722, 1, 1}, - {243000, 4, 1, 24, 1258291, 1, 1}, - {324000, 4, 1, 32, 1677722, 1, 1}, - {432000, 3, 1, 32, 1677722, 1, 1} -}; - static bool bxt_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *intel_encoder) { - struct intel_shared_dpll *pll; - struct bxt_clk_div clk_div = {0}; - int vco = 0; - uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; - uint32_t lanestagger; - int clock = crtc_state->port_clock; - - if (intel_encoder->type == INTEL_OUTPUT_HDMI) { - intel_clock_t best_clock; - - /* Calculate HDMI div */ - /* - * FIXME: tie the following calculation into - * i9xx_crtc_compute_clock - */ - if (!bxt_find_best_dpll(crtc_state, clock, &best_clock)) { - DRM_DEBUG_DRIVER("no PLL dividers found for clock %d pipe %c\n", - clock, pipe_name(intel_crtc->pipe)); - return false; - } - - clk_div.p1 = best_clock.p1; - clk_div.p2 = best_clock.p2; - WARN_ON(best_clock.m1 != 2); - clk_div.n = best_clock.n; - clk_div.m2_int = best_clock.m2 >> 22; - clk_div.m2_frac = best_clock.m2 & ((1 << 22) - 1); - clk_div.m2_frac_en = clk_div.m2_frac != 0; - - vco = best_clock.vco; - } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT || - intel_encoder->type == INTEL_OUTPUT_EDP) { - int i; - - clk_div = bxt_dp_clk_val[0]; - for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) { - if (bxt_dp_clk_val[i].clock == clock) { - clk_div = bxt_dp_clk_val[i]; - break; - } - } - vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2; - } - - if (vco >= 6200000 && vco <= 6700000) { - prop_coef = 4; - int_coef = 9; - gain_ctl = 3; - targ_cnt = 8; - } else if ((vco > 5400000 && vco < 6200000) || - (vco >= 4800000 && vco < 5400000)) { - prop_coef = 5; - int_coef = 11; - gain_ctl = 3; - targ_cnt = 9; - } else if (vco == 5400000) { - prop_coef = 3; - int_coef = 8; - gain_ctl = 1; - targ_cnt = 9; - } else { - DRM_ERROR("Invalid VCO\n"); - return false; - } - - memset(&crtc_state->dpll_hw_state, 0, - sizeof(crtc_state->dpll_hw_state)); - - if (clock > 270000) - lanestagger = 0x18; - else if (clock > 135000) - lanestagger = 0x0d; - else if (clock > 67000) - lanestagger = 0x07; - else if (clock > 33000) - lanestagger = 0x04; - else - lanestagger = 0x02; - - crtc_state->dpll_hw_state.ebb0 = - PORT_PLL_P1(clk_div.p1) | PORT_PLL_P2(clk_div.p2); - crtc_state->dpll_hw_state.pll0 = clk_div.m2_int; - crtc_state->dpll_hw_state.pll1 = PORT_PLL_N(clk_div.n); - crtc_state->dpll_hw_state.pll2 = clk_div.m2_frac; - - if (clk_div.m2_frac_en) - crtc_state->dpll_hw_state.pll3 = - PORT_PLL_M2_FRAC_ENABLE; - - crtc_state->dpll_hw_state.pll6 = - prop_coef | PORT_PLL_INT_COEFF(int_coef); - crtc_state->dpll_hw_state.pll6 |= - PORT_PLL_GAIN_CTL(gain_ctl); - - crtc_state->dpll_hw_state.pll8 = targ_cnt; - - crtc_state->dpll_hw_state.pll9 = 5 << PORT_PLL_LOCK_THRESHOLD_SHIFT; - - crtc_state->dpll_hw_state.pll10 = - PORT_PLL_DCO_AMP(PORT_PLL_DCO_AMP_DEFAULT) - | PORT_PLL_DCO_AMP_OVR_EN_H; - - crtc_state->dpll_hw_state.ebb4 = PORT_PLL_10BIT_CLK_ENABLE; - - crtc_state->dpll_hw_state.pcsdw12 = - LANESTAGGER_STRAP_OVRD | lanestagger; - - pll = intel_get_shared_dpll(intel_crtc, crtc_state); - if (pll == NULL) { - DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", - pipe_name(intel_crtc->pipe)); - return false; - } - - /* shared DPLL id 0 is DPLL A */ - crtc_state->ddi_pll_sel = pll->id; - - return true; + return !!intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); } /* @@ -1753,6 +1069,8 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc) uint32_t temp; if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) { + WARN_ON(transcoder_is_dsi(cpu_transcoder)); + temp = TRANS_MSA_SYNC_CLK; switch (intel_crtc->config->pipe_bpp) { case 18: @@ -2121,7 +1439,7 @@ static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, u32 n_entries, i; uint32_t val; - if (type == INTEL_OUTPUT_EDP && dev_priv->edp_low_vswing) { + if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) { n_entries = ARRAY_SIZE(bxt_ddi_translations_edp); ddi_translations = bxt_ddi_translations_edp; } else if (type == INTEL_OUTPUT_DISPLAYPORT @@ -2259,24 +1577,6 @@ void intel_ddi_clk_select(struct intel_encoder *encoder, uint32_t dpll = pipe_config->ddi_pll_sel; uint32_t val; - /* - * DPLL0 is used for eDP and is the only "private" DPLL (as - * opposed to shared) on SKL - */ - if (encoder->type == INTEL_OUTPUT_EDP) { - WARN_ON(dpll != SKL_DPLL0); - - val = I915_READ(DPLL_CTRL1); - - val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | - DPLL_CTRL1_SSC(dpll) | - DPLL_CTRL1_LINK_RATE_MASK(dpll)); - val |= pipe_config->dpll_hw_state.ctrl1 << (dpll * 6); - - I915_WRITE(DPLL_CTRL1, val); - POSTING_READ(DPLL_CTRL1); - } - /* DDI -> PLL mapping */ val = I915_READ(DPLL_CTRL2); @@ -2301,6 +1601,12 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) enum port port = intel_ddi_get_encoder_port(intel_encoder); int type = intel_encoder->type; + if (type == INTEL_OUTPUT_HDMI) { + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); + } + intel_prepare_ddi_buffer(intel_encoder); if (type == INTEL_OUTPUT_EDP) { @@ -2367,6 +1673,12 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) DPLL_CTRL2_DDI_CLK_OFF(port))); else if (INTEL_INFO(dev)->gen < 9) I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); + + if (type == INTEL_OUTPUT_HDMI) { + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); + } } static void intel_enable_ddi(struct intel_encoder *intel_encoder) @@ -2430,251 +1742,101 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder) } } -static void hsw_ddi_wrpll_enable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) -{ - I915_WRITE(WRPLL_CTL(pll->id), pll->config.hw_state.wrpll); - POSTING_READ(WRPLL_CTL(pll->id)); - udelay(20); -} - -static void hsw_ddi_spll_enable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) +static bool broxton_phy_is_enabled(struct drm_i915_private *dev_priv, + enum dpio_phy phy) { - I915_WRITE(SPLL_CTL, pll->config.hw_state.spll); - POSTING_READ(SPLL_CTL); - udelay(20); -} - -static void hsw_ddi_wrpll_disable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) -{ - uint32_t val; - - val = I915_READ(WRPLL_CTL(pll->id)); - I915_WRITE(WRPLL_CTL(pll->id), val & ~WRPLL_PLL_ENABLE); - POSTING_READ(WRPLL_CTL(pll->id)); -} - -static void hsw_ddi_spll_disable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) -{ - uint32_t val; - - val = I915_READ(SPLL_CTL); - I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE); - POSTING_READ(SPLL_CTL); -} - -static bool hsw_ddi_wrpll_get_hw_state(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll, - struct intel_dpll_hw_state *hw_state) -{ - uint32_t val; - - if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) + if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy))) return false; - val = I915_READ(WRPLL_CTL(pll->id)); - hw_state->wrpll = val; - - intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); - - return val & WRPLL_PLL_ENABLE; -} - -static bool hsw_ddi_spll_get_hw_state(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll, - struct intel_dpll_hw_state *hw_state) -{ - uint32_t val; + if ((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & + (PHY_POWER_GOOD | PHY_RESERVED)) != PHY_POWER_GOOD) { + DRM_DEBUG_DRIVER("DDI PHY %d powered, but power hasn't settled\n", + phy); - if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) return false; + } - val = I915_READ(SPLL_CTL); - hw_state->spll = val; - - intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); - - return val & SPLL_PLL_ENABLE; -} - - -static const char * const hsw_ddi_pll_names[] = { - "WRPLL 1", - "WRPLL 2", - "SPLL" -}; + if (phy == DPIO_PHY1 && + !(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE)) { + DRM_DEBUG_DRIVER("DDI PHY 1 powered, but GRC isn't done\n"); -static void hsw_shared_dplls_init(struct drm_i915_private *dev_priv) -{ - int i; + return false; + } - dev_priv->num_shared_dpll = 3; + if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) { + DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n", + phy); - for (i = 0; i < 2; i++) { - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = hsw_ddi_wrpll_disable; - dev_priv->shared_dplls[i].enable = hsw_ddi_wrpll_enable; - dev_priv->shared_dplls[i].get_hw_state = - hsw_ddi_wrpll_get_hw_state; + return false; } - /* SPLL is special, but needs to be initialized anyway.. */ - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = hsw_ddi_spll_disable; - dev_priv->shared_dplls[i].enable = hsw_ddi_spll_enable; - dev_priv->shared_dplls[i].get_hw_state = hsw_ddi_spll_get_hw_state; - + return true; } -static const char * const skl_ddi_pll_names[] = { - "DPLL 1", - "DPLL 2", - "DPLL 3", -}; - -struct skl_dpll_regs { - i915_reg_t ctl, cfgcr1, cfgcr2; -}; - -/* this array is indexed by the *shared* pll id */ -static const struct skl_dpll_regs skl_dpll_regs[3] = { - { - /* DPLL 1 */ - .ctl = LCPLL2_CTL, - .cfgcr1 = DPLL_CFGCR1(SKL_DPLL1), - .cfgcr2 = DPLL_CFGCR2(SKL_DPLL1), - }, - { - /* DPLL 2 */ - .ctl = WRPLL_CTL(0), - .cfgcr1 = DPLL_CFGCR1(SKL_DPLL2), - .cfgcr2 = DPLL_CFGCR2(SKL_DPLL2), - }, - { - /* DPLL 3 */ - .ctl = WRPLL_CTL(1), - .cfgcr1 = DPLL_CFGCR1(SKL_DPLL3), - .cfgcr2 = DPLL_CFGCR2(SKL_DPLL3), - }, -}; - -static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) +static u32 broxton_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy) { - uint32_t val; - unsigned int dpll; - const struct skl_dpll_regs *regs = skl_dpll_regs; - - /* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */ - dpll = pll->id + 1; - - val = I915_READ(DPLL_CTRL1); - - val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | DPLL_CTRL1_SSC(dpll) | - DPLL_CTRL1_LINK_RATE_MASK(dpll)); - val |= pll->config.hw_state.ctrl1 << (dpll * 6); + u32 val = I915_READ(BXT_PORT_REF_DW6(phy)); - I915_WRITE(DPLL_CTRL1, val); - POSTING_READ(DPLL_CTRL1); - - I915_WRITE(regs[pll->id].cfgcr1, pll->config.hw_state.cfgcr1); - I915_WRITE(regs[pll->id].cfgcr2, pll->config.hw_state.cfgcr2); - POSTING_READ(regs[pll->id].cfgcr1); - POSTING_READ(regs[pll->id].cfgcr2); - - /* the enable bit is always bit 31 */ - I915_WRITE(regs[pll->id].ctl, - I915_READ(regs[pll->id].ctl) | LCPLL_PLL_ENABLE); - - if (wait_for(I915_READ(DPLL_STATUS) & DPLL_LOCK(dpll), 5)) - DRM_ERROR("DPLL %d not locked\n", dpll); + return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT; } -static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) +static void broxton_phy_wait_grc_done(struct drm_i915_private *dev_priv, + enum dpio_phy phy) { - const struct skl_dpll_regs *regs = skl_dpll_regs; - - /* the enable bit is always bit 31 */ - I915_WRITE(regs[pll->id].ctl, - I915_READ(regs[pll->id].ctl) & ~LCPLL_PLL_ENABLE); - POSTING_READ(regs[pll->id].ctl); + if (wait_for(I915_READ(BXT_PORT_REF_DW3(phy)) & GRC_DONE, 10)) + DRM_ERROR("timeout waiting for PHY%d GRC\n", phy); } -static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll, - struct intel_dpll_hw_state *hw_state) -{ - uint32_t val; - unsigned int dpll; - const struct skl_dpll_regs *regs = skl_dpll_regs; - bool ret; - - if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) - return false; +static bool broxton_phy_verify_state(struct drm_i915_private *dev_priv, + enum dpio_phy phy); - ret = false; - - /* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */ - dpll = pll->id + 1; - - val = I915_READ(regs[pll->id].ctl); - if (!(val & LCPLL_PLL_ENABLE)) - goto out; - - val = I915_READ(DPLL_CTRL1); - hw_state->ctrl1 = (val >> (dpll * 6)) & 0x3f; - - /* avoid reading back stale values if HDMI mode is not enabled */ - if (val & DPLL_CTRL1_HDMI_MODE(dpll)) { - hw_state->cfgcr1 = I915_READ(regs[pll->id].cfgcr1); - hw_state->cfgcr2 = I915_READ(regs[pll->id].cfgcr2); - } - ret = true; - -out: - intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); +static void broxton_phy_init(struct drm_i915_private *dev_priv, + enum dpio_phy phy) +{ + enum port port; + u32 ports, val; - return ret; -} + if (broxton_phy_is_enabled(dev_priv, phy)) { + /* Still read out the GRC value for state verification */ + if (phy == DPIO_PHY0) + dev_priv->bxt_phy_grc = broxton_get_grc(dev_priv, phy); -static void skl_shared_dplls_init(struct drm_i915_private *dev_priv) -{ - int i; + if (broxton_phy_verify_state(dev_priv, phy)) { + DRM_DEBUG_DRIVER("DDI PHY %d already enabled, " + "won't reprogram it\n", phy); - dev_priv->num_shared_dpll = 3; + return; + } - for (i = 0; i < dev_priv->num_shared_dpll; i++) { - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = skl_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = skl_ddi_pll_disable; - dev_priv->shared_dplls[i].enable = skl_ddi_pll_enable; - dev_priv->shared_dplls[i].get_hw_state = - skl_ddi_pll_get_hw_state; + DRM_DEBUG_DRIVER("DDI PHY %d enabled with invalid state, " + "force reprogramming it\n", phy); + } else { + DRM_DEBUG_DRIVER("DDI PHY %d not enabled, enabling it\n", phy); } -} - -static void broxton_phy_init(struct drm_i915_private *dev_priv, - enum dpio_phy phy) -{ - enum port port; - uint32_t val; val = I915_READ(BXT_P_CR_GT_DISP_PWRON); val |= GT_DISPLAY_POWER_ON(phy); I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); - /* Considering 10ms timeout until BSpec is updated */ - if (wait_for(I915_READ(BXT_PORT_CL1CM_DW0(phy)) & PHY_POWER_GOOD, 10)) + /* + * The PHY registers start out inaccessible and respond to reads with + * all 1s. Eventually they become accessible as they power up, then + * the reserved bit will give the default 0. Poll on the reserved bit + * becoming 0 to find when the PHY is accessible. + * HW team confirmed that the time to reach phypowergood status is + * anywhere between 50 us and 100us. + */ + if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & + (PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) { DRM_ERROR("timeout during PHY%d power on\n", phy); + } + + if (phy == DPIO_PHY0) + ports = BIT(PORT_B) | BIT(PORT_C); + else + ports = BIT(PORT_A); - for (port = (phy == DPIO_PHY0 ? PORT_B : PORT_A); - port <= (phy == DPIO_PHY0 ? PORT_C : PORT_A); port++) { + for_each_port_masked(port, ports) { int lane; for (lane = 0; lane < 4; lane++) { @@ -2722,6 +1884,9 @@ static void broxton_phy_init(struct drm_i915_private *dev_priv, * enabled. * TODO: port C is only connected on BXT-P, so on BXT0/1 we should * power down the second channel on PHY0 as well. + * + * FIXME: Clarify programming of the following, the register is + * read-only with bit 6 fixed at 0 at least in stepping A. */ if (phy == DPIO_PHY1) val |= OCL2_LDOFUSE_PWR_DIS; @@ -2734,12 +1899,10 @@ static void broxton_phy_init(struct drm_i915_private *dev_priv, * the corresponding calibrated value from PHY1, and disable * the automatic calibration on PHY0. */ - if (wait_for(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE, - 10)) - DRM_ERROR("timeout waiting for PHY1 GRC\n"); + broxton_phy_wait_grc_done(dev_priv, DPIO_PHY1); - val = I915_READ(BXT_PORT_REF_DW6(DPIO_PHY1)); - val = (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT; + val = dev_priv->bxt_phy_grc = broxton_get_grc(dev_priv, + DPIO_PHY1); grc_code = val << GRC_CODE_FAST_SHIFT | val << GRC_CODE_SLOW_SHIFT | val; @@ -2749,17 +1912,27 @@ static void broxton_phy_init(struct drm_i915_private *dev_priv, val |= GRC_DIS | GRC_RDY_OVRD; I915_WRITE(BXT_PORT_REF_DW8(DPIO_PHY0), val); } + /* + * During PHY1 init delay waiting for GRC calibration to finish, since + * it can happen in parallel with the subsequent PHY0 init. + */ val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); val |= COMMON_RESET_DIS; I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); } -void broxton_ddi_phy_init(struct drm_device *dev) +void broxton_ddi_phy_init(struct drm_i915_private *dev_priv) { /* Enable PHY1 first since it provides Rcomp for PHY0 */ - broxton_phy_init(dev->dev_private, DPIO_PHY1); - broxton_phy_init(dev->dev_private, DPIO_PHY0); + broxton_phy_init(dev_priv, DPIO_PHY1); + broxton_phy_init(dev_priv, DPIO_PHY0); + + /* + * If BIOS enabled only PHY0 and not PHY1, we skipped waiting for the + * PHY1 GRC calibration to finish, so wait for it here. + */ + broxton_phy_wait_grc_done(dev_priv, DPIO_PHY1); } static void broxton_phy_uninit(struct drm_i915_private *dev_priv, @@ -2770,260 +1943,126 @@ static void broxton_phy_uninit(struct drm_i915_private *dev_priv, val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); val &= ~COMMON_RESET_DIS; I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); + + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + val &= ~GT_DISPLAY_POWER_ON(phy); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); } -void broxton_ddi_phy_uninit(struct drm_device *dev) +void broxton_ddi_phy_uninit(struct drm_i915_private *dev_priv) { - struct drm_i915_private *dev_priv = dev->dev_private; - broxton_phy_uninit(dev_priv, DPIO_PHY1); broxton_phy_uninit(dev_priv, DPIO_PHY0); - - /* FIXME: do this in broxton_phy_uninit per phy */ - I915_WRITE(BXT_P_CR_GT_DISP_PWRON, 0); -} - -static const char * const bxt_ddi_pll_names[] = { - "PORT PLL A", - "PORT PLL B", - "PORT PLL C", -}; - -static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) -{ - uint32_t temp; - enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ - - temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); - temp &= ~PORT_PLL_REF_SEL; - /* Non-SSC reference */ - I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); - - /* Disable 10 bit clock */ - temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); - temp &= ~PORT_PLL_10BIT_CLK_ENABLE; - I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); - - /* Write P1 & P2 */ - temp = I915_READ(BXT_PORT_PLL_EBB_0(port)); - temp &= ~(PORT_PLL_P1_MASK | PORT_PLL_P2_MASK); - temp |= pll->config.hw_state.ebb0; - I915_WRITE(BXT_PORT_PLL_EBB_0(port), temp); - - /* Write M2 integer */ - temp = I915_READ(BXT_PORT_PLL(port, 0)); - temp &= ~PORT_PLL_M2_MASK; - temp |= pll->config.hw_state.pll0; - I915_WRITE(BXT_PORT_PLL(port, 0), temp); - - /* Write N */ - temp = I915_READ(BXT_PORT_PLL(port, 1)); - temp &= ~PORT_PLL_N_MASK; - temp |= pll->config.hw_state.pll1; - I915_WRITE(BXT_PORT_PLL(port, 1), temp); - - /* Write M2 fraction */ - temp = I915_READ(BXT_PORT_PLL(port, 2)); - temp &= ~PORT_PLL_M2_FRAC_MASK; - temp |= pll->config.hw_state.pll2; - I915_WRITE(BXT_PORT_PLL(port, 2), temp); - - /* Write M2 fraction enable */ - temp = I915_READ(BXT_PORT_PLL(port, 3)); - temp &= ~PORT_PLL_M2_FRAC_ENABLE; - temp |= pll->config.hw_state.pll3; - I915_WRITE(BXT_PORT_PLL(port, 3), temp); - - /* Write coeff */ - temp = I915_READ(BXT_PORT_PLL(port, 6)); - temp &= ~PORT_PLL_PROP_COEFF_MASK; - temp &= ~PORT_PLL_INT_COEFF_MASK; - temp &= ~PORT_PLL_GAIN_CTL_MASK; - temp |= pll->config.hw_state.pll6; - I915_WRITE(BXT_PORT_PLL(port, 6), temp); - - /* Write calibration val */ - temp = I915_READ(BXT_PORT_PLL(port, 8)); - temp &= ~PORT_PLL_TARGET_CNT_MASK; - temp |= pll->config.hw_state.pll8; - I915_WRITE(BXT_PORT_PLL(port, 8), temp); - - temp = I915_READ(BXT_PORT_PLL(port, 9)); - temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK; - temp |= pll->config.hw_state.pll9; - I915_WRITE(BXT_PORT_PLL(port, 9), temp); - - temp = I915_READ(BXT_PORT_PLL(port, 10)); - temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H; - temp &= ~PORT_PLL_DCO_AMP_MASK; - temp |= pll->config.hw_state.pll10; - I915_WRITE(BXT_PORT_PLL(port, 10), temp); - - /* Recalibrate with new settings */ - temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); - temp |= PORT_PLL_RECALIBRATE; - I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); - temp &= ~PORT_PLL_10BIT_CLK_ENABLE; - temp |= pll->config.hw_state.ebb4; - I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); - - /* Enable PLL */ - temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); - temp |= PORT_PLL_ENABLE; - I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); - POSTING_READ(BXT_PORT_PLL_ENABLE(port)); - - if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & - PORT_PLL_LOCK), 200)) - DRM_ERROR("PLL %d not locked\n", port); - - /* - * While we write to the group register to program all lanes at once we - * can read only lane registers and we pick lanes 0/1 for that. - */ - temp = I915_READ(BXT_PORT_PCS_DW12_LN01(port)); - temp &= ~LANE_STAGGER_MASK; - temp &= ~LANESTAGGER_STRAP_OVRD; - temp |= pll->config.hw_state.pcsdw12; - I915_WRITE(BXT_PORT_PCS_DW12_GRP(port), temp); } -static void bxt_ddi_pll_disable(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll) +static bool __printf(6, 7) +__phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy, + i915_reg_t reg, u32 mask, u32 expected, + const char *reg_fmt, ...) { - enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ - uint32_t temp; + struct va_format vaf; + va_list args; + u32 val; - temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); - temp &= ~PORT_PLL_ENABLE; - I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); - POSTING_READ(BXT_PORT_PLL_ENABLE(port)); -} + val = I915_READ(reg); + if ((val & mask) == expected) + return true; -static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, - struct intel_shared_dpll *pll, - struct intel_dpll_hw_state *hw_state) -{ - enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ - uint32_t val; - bool ret; + va_start(args, reg_fmt); + vaf.fmt = reg_fmt; + vaf.va = &args; - if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) - return false; + DRM_DEBUG_DRIVER("DDI PHY %d reg %pV [%08x] state mismatch: " + "current %08x, expected %08x (mask %08x)\n", + phy, &vaf, reg.reg, val, (val & ~mask) | expected, + mask); - ret = false; + va_end(args); - val = I915_READ(BXT_PORT_PLL_ENABLE(port)); - if (!(val & PORT_PLL_ENABLE)) - goto out; + return false; +} - hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port)); - hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK; +static bool broxton_phy_verify_state(struct drm_i915_private *dev_priv, + enum dpio_phy phy) +{ + enum port port; + u32 ports; + uint32_t mask; + bool ok; - hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(port)); - hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE; +#define _CHK(reg, mask, exp, fmt, ...) \ + __phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt, \ + ## __VA_ARGS__) - hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0)); - hw_state->pll0 &= PORT_PLL_M2_MASK; + /* We expect the PHY to be always enabled */ + if (!broxton_phy_is_enabled(dev_priv, phy)) + return false; - hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1)); - hw_state->pll1 &= PORT_PLL_N_MASK; + ok = true; - hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2)); - hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK; + if (phy == DPIO_PHY0) + ports = BIT(PORT_B) | BIT(PORT_C); + else + ports = BIT(PORT_A); - hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3)); - hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE; + for_each_port_masked(port, ports) { + int lane; - hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6)); - hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK | - PORT_PLL_INT_COEFF_MASK | - PORT_PLL_GAIN_CTL_MASK; + for (lane = 0; lane < 4; lane++) + ok &= _CHK(BXT_PORT_TX_DW14_LN(port, lane), + LATENCY_OPTIM, + lane != 1 ? LATENCY_OPTIM : 0, + "BXT_PORT_TX_DW14_LN(%d, %d)", port, lane); + } - hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8)); - hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK; + /* PLL Rcomp code offset */ + ok &= _CHK(BXT_PORT_CL1CM_DW9(phy), + IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT, + "BXT_PORT_CL1CM_DW9(%d)", phy); + ok &= _CHK(BXT_PORT_CL1CM_DW10(phy), + IREF1RC_OFFSET_MASK, 0xe4 << IREF1RC_OFFSET_SHIFT, + "BXT_PORT_CL1CM_DW10(%d)", phy); - hw_state->pll9 = I915_READ(BXT_PORT_PLL(port, 9)); - hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK; + /* Power gating */ + mask = OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG; + ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask, + "BXT_PORT_CL1CM_DW28(%d)", phy); - hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10)); - hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H | - PORT_PLL_DCO_AMP_MASK; + if (phy == DPIO_PHY0) + ok &= _CHK(BXT_PORT_CL2CM_DW6_BC, + DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, + "BXT_PORT_CL2CM_DW6_BC"); /* - * While we write to the group register to program all lanes at once we - * can read only lane registers. We configure all lanes the same way, so - * here just read out lanes 0/1 and output a note if lanes 2/3 differ. + * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, + * at least on stepping A this bit is read-only and fixed at 0. */ - hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(port)); - if (I915_READ(BXT_PORT_PCS_DW12_LN23(port)) != hw_state->pcsdw12) - DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n", - hw_state->pcsdw12, - I915_READ(BXT_PORT_PCS_DW12_LN23(port))); - hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD; - - ret = true; - -out: - intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); - - return ret; -} -static void bxt_shared_dplls_init(struct drm_i915_private *dev_priv) -{ - int i; + if (phy == DPIO_PHY0) { + u32 grc_code = dev_priv->bxt_phy_grc; - dev_priv->num_shared_dpll = 3; + grc_code = grc_code << GRC_CODE_FAST_SHIFT | + grc_code << GRC_CODE_SLOW_SHIFT | + grc_code; + mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK | + GRC_CODE_NOM_MASK; + ok &= _CHK(BXT_PORT_REF_DW6(DPIO_PHY0), mask, grc_code, + "BXT_PORT_REF_DW6(%d)", DPIO_PHY0); - for (i = 0; i < dev_priv->num_shared_dpll; i++) { - dev_priv->shared_dplls[i].id = i; - dev_priv->shared_dplls[i].name = bxt_ddi_pll_names[i]; - dev_priv->shared_dplls[i].disable = bxt_ddi_pll_disable; - dev_priv->shared_dplls[i].enable = bxt_ddi_pll_enable; - dev_priv->shared_dplls[i].get_hw_state = - bxt_ddi_pll_get_hw_state; + mask = GRC_DIS | GRC_RDY_OVRD; + ok &= _CHK(BXT_PORT_REF_DW8(DPIO_PHY0), mask, mask, + "BXT_PORT_REF_DW8(%d)", DPIO_PHY0); } + + return ok; +#undef _CHK } -void intel_ddi_pll_init(struct drm_device *dev) +void broxton_ddi_phy_verify_state(struct drm_i915_private *dev_priv) { - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t val = I915_READ(LCPLL_CTL); - - if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) - skl_shared_dplls_init(dev_priv); - else if (IS_BROXTON(dev)) - bxt_shared_dplls_init(dev_priv); - else - hsw_shared_dplls_init(dev_priv); - - if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) { - int cdclk_freq; - - cdclk_freq = dev_priv->display.get_display_clock_speed(dev); - dev_priv->skl_boot_cdclk = cdclk_freq; - if (skl_sanitize_cdclk(dev_priv)) - DRM_DEBUG_KMS("Sanitized cdclk programmed by pre-os\n"); - if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) - DRM_ERROR("LCPLL1 is disabled\n"); - } else if (IS_BROXTON(dev)) { - broxton_init_cdclk(dev); - broxton_ddi_phy_init(dev); - } else { - /* - * The LCPLL register should be turned on by the BIOS. For now - * let's just check its state and print errors in case - * something is wrong. Don't even try to turn it on. - */ - - if (val & LCPLL_CD_SOURCE_FCLK) - DRM_ERROR("CDCLK source is not LCPLL\n"); - - if (val & LCPLL_PLL_DISABLE) - DRM_ERROR("LCPLL is disabled\n"); - } + if (!broxton_phy_verify_state(dev_priv, DPIO_PHY0) || + !broxton_phy_verify_state(dev_priv, DPIO_PHY1)) + i915_report_error(dev_priv, "DDI PHY state mismatch\n"); } void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) @@ -3078,12 +2117,18 @@ void intel_ddi_fdi_disable(struct drm_crtc *crtc) struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); uint32_t val; - intel_ddi_post_disable(intel_encoder); - + /* + * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) + * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, + * step 13 is the correct place for it. Step 18 is where it was + * originally before the BUN. + */ val = I915_READ(FDI_RX_CTL(PIPE_A)); val &= ~FDI_RX_ENABLE; I915_WRITE(FDI_RX_CTL(PIPE_A), val); + intel_ddi_post_disable(intel_encoder); + val = I915_READ(FDI_RX_MISC(PIPE_A)); val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); @@ -3098,23 +2143,6 @@ void intel_ddi_fdi_disable(struct drm_crtc *crtc) I915_WRITE(FDI_RX_CTL(PIPE_A), val); } -bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv, - struct intel_crtc *intel_crtc) -{ - u32 temp; - - if (intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { - temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); - - intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); - - if (temp & AUDIO_OUTPUT_ENABLE(intel_crtc->pipe)) - return true; - } - - return false; -} - void intel_ddi_get_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { @@ -3124,6 +2152,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder, struct intel_hdmi *intel_hdmi; u32 temp, flags = 0; + /* XXX: DSI transcoder paranoia */ + if (WARN_ON(transcoder_is_dsi(cpu_transcoder))) + return; + temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); if (temp & TRANS_DDI_PHSYNC) flags |= DRM_MODE_FLAG_PHSYNC; @@ -3160,8 +2192,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder, if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config)) pipe_config->has_infoframe = true; - break; + /* fall through */ case TRANS_DDI_MODE_SELECT_DVI: + pipe_config->lane_count = 4; + break; case TRANS_DDI_MODE_SELECT_FDI: break; case TRANS_DDI_MODE_SELECT_DP_SST: @@ -3175,11 +2209,14 @@ void intel_ddi_get_config(struct intel_encoder *encoder, break; } - pipe_config->has_audio = - intel_ddi_is_audio_enabled(dev_priv, intel_crtc); + if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { + temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); + if (temp & AUDIO_OUTPUT_ENABLE(intel_crtc->pipe)) + pipe_config->has_audio = true; + } - if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp_bpp && - pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) { + if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { /* * This is a big fat ugly hack. * @@ -3194,19 +2231,13 @@ void intel_ddi_get_config(struct intel_encoder *encoder, * load. */ DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", - pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp); - dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp; + pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); + dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; } intel_ddi_clock_get(encoder, pipe_config); } -static void intel_ddi_destroy(struct drm_encoder *encoder) -{ - /* HDMI has nothing special to destroy, so we can go with this. */ - intel_dp_encoder_destroy(encoder); -} - static bool intel_ddi_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { @@ -3225,7 +2256,8 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder, } static const struct drm_encoder_funcs intel_ddi_funcs = { - .destroy = intel_ddi_destroy, + .reset = intel_dp_encoder_reset, + .destroy = intel_dp_encoder_destroy, }; static struct intel_connector * @@ -3324,6 +2356,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port) intel_encoder->post_disable = intel_ddi_post_disable; intel_encoder->get_hw_state = intel_ddi_get_hw_state; intel_encoder->get_config = intel_ddi_get_config; + intel_encoder->suspend = intel_dp_encoder_suspend; intel_dig_port->port = port; intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & |