1 files changed, 65 insertions, 42 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 38452d82ac7d..581fb4b2f766 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2077,8 +2077,10 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 	else
 		dspcntr &= ~DISPPLANE_TILED;
 
-	/* must disable */
-	dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
+	if (IS_HASWELL(dev))
+		dspcntr &= ~DISPPLANE_TRICKLE_FEED_DISABLE;
+	else
+		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
 	I915_WRITE(reg, dspcntr);
 
@@ -2247,7 +2249,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		I915_WRITE(PIPESRC(intel_crtc->pipe),
 			   ((crtc->mode.hdisplay - 1) << 16) |
 			   (crtc->mode.vdisplay - 1));
-		if (!intel_crtc->config.pch_pfit.size &&
+		if (!intel_crtc->config.pch_pfit.enabled &&
 		    (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
 		     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
 			I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
@@ -3201,7 +3203,7 @@ static void ironlake_pfit_enable(struct intel_crtc *crtc)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int pipe = crtc->pipe;
 
-	if (crtc->config.pch_pfit.size) {
+	if (crtc->config.pch_pfit.enabled) {
 		/* Force use of hard-coded filter coefficients
 		 * as some pre-programmed values are broken,
 		 * e.g. x201.
@@ -3426,7 +3428,7 @@ static void ironlake_pfit_disable(struct intel_crtc *crtc)
 
 	/* To avoid upsetting the power well on haswell only disable the pfit if
 	 * it's in use. The hw state code will make sure we get this right. */
-	if (crtc->config.pch_pfit.size) {
+	if (crtc->config.pch_pfit.enabled) {
 		I915_WRITE(PF_CTL(pipe), 0);
 		I915_WRITE(PF_WIN_POS(pipe), 0);
 		I915_WRITE(PF_WIN_SZ(pipe), 0);
@@ -3939,8 +3941,6 @@ static void intel_connector_check_state(struct intel_connector *connector)
  * consider. */
 void intel_connector_dpms(struct drm_connector *connector, int mode)
 {
-	struct intel_encoder *encoder = intel_attached_encoder(connector);
-
 	/* All the simple cases only support two dpms states. */
 	if (mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
@@ -3951,10 +3951,8 @@ void intel_connector_dpms(struct drm_connector *connector, int mode)
 	connector->dpms = mode;
 
 	/* Only need to change hw state when actually enabled */
-	if (encoder->base.crtc)
-		intel_encoder_dpms(encoder, mode);
-	else
-		WARN_ON(encoder->connectors_active != false);
+	if (connector->encoder)
+		intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
 
 	intel_modeset_check_state(connector->dev);
 }
@@ -4773,6 +4771,10 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
 
 	pipeconf = 0;
 
+	if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
+	    I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE)
+		pipeconf |= PIPECONF_ENABLE;
+
 	if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
 		/* Enable pixel doubling when the dot clock is > 90% of the (display)
 		 * core speed.
@@ -4875,9 +4877,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
 	if (is_lvds && dev_priv->lvds_downclock_avail) {
 		/*
 		 * Ensure we match the reduced clock's P to the target clock.
@@ -5766,9 +5765,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		intel_crtc->config.dpll.p2 = clock.p2;
 	}
 
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
 	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
 	if (intel_crtc->config.has_pch_encoder) {
 		fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
@@ -5857,6 +5853,7 @@ static void ironlake_get_pfit_config(struct intel_crtc *crtc,
 	tmp = I915_READ(PF_CTL(crtc->pipe));
 
 	if (tmp & PF_ENABLE) {
+		pipe_config->pch_pfit.enabled = true;
 		pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
 		pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
 
@@ -6234,7 +6231,7 @@ static void haswell_modeset_global_resources(struct drm_device *dev)
 		if (!crtc->base.enabled)
 			continue;
 
-		if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.size ||
+		if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.enabled ||
 		    crtc->config.cpu_transcoder != TRANSCODER_EDP)
 			enable = true;
 	}
@@ -6257,9 +6254,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	if (!intel_ddi_pll_mode_set(crtc))
 		return -EINVAL;
 
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
 	if (intel_crtc->config.has_dp_encoder)
 		intel_dp_set_m_n(intel_crtc);
 
@@ -6492,15 +6486,15 @@ static void haswell_write_eld(struct drm_connector *connector,
 
 	/* Set ELD valid state */
 	tmp = I915_READ(aud_cntrl_st2);
-	DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
+	DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
 	tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
 	I915_WRITE(aud_cntrl_st2, tmp);
 	tmp = I915_READ(aud_cntrl_st2);
-	DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
+	DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
 
 	/* Enable HDMI mode */
 	tmp = I915_READ(aud_config);
-	DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
+	DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
 	/* clear N_programing_enable and N_value_index */
 	tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
 	I915_WRITE(aud_config, tmp);
@@ -6762,8 +6756,10 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
 			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
 			cntl |= CURSOR_MODE_DISABLE;
 		}
-		if (IS_HASWELL(dev))
+		if (IS_HASWELL(dev)) {
 			cntl |= CURSOR_PIPE_CSC_ENABLE;
+			cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
+		}
 		I915_WRITE(CURCNTR_IVB(pipe), cntl);
 
 		intel_crtc->cursor_visible = visible;
@@ -6933,7 +6929,8 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	intel_crtc->cursor_width = width;
 	intel_crtc->cursor_height = height;
 
-	intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
+	if (intel_crtc->active)
+		intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
 
 	return 0;
 fail_unpin:
@@ -6952,7 +6949,8 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 	intel_crtc->cursor_x = x;
 	intel_crtc->cursor_y = y;
 
-	intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
+	if (intel_crtc->active)
+		intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
 
 	return 0;
 }
@@ -7309,8 +7307,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 		}
 	}
 
-	pipe_config->adjusted_mode.clock = clock.dot *
-		pipe_config->pixel_multiplier;
+	pipe_config->adjusted_mode.clock = clock.dot;
 }
 
 static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
@@ -7828,12 +7825,6 @@ err:
 	return ret;
 }
 
-/*
- * On gen7 we currently use the blit ring because (in early silicon at least)
- * the render ring doesn't give us interrpts for page flip completion, which
- * means clients will hang after the first flip is queued.  Fortunately the
- * blit ring generates interrupts properly, so use it instead.
- */
 static int intel_gen7_queue_flip(struct drm_device *dev,
 				 struct drm_crtc *crtc,
 				 struct drm_framebuffer *fb,
@@ -7842,9 +7833,13 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+	struct intel_ring_buffer *ring;
 	uint32_t plane_bit = 0;
-	int ret;
+	int len, ret;
+
+	ring = obj->ring;
+	if (IS_VALLEYVIEW(dev) || ring == NULL || ring->id != RCS)
+		ring = &dev_priv->ring[BCS];
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
@@ -7866,10 +7861,34 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 		goto err_unpin;
 	}
 
-	ret = intel_ring_begin(ring, 4);
+	len = 4;
+	if (ring->id == RCS)
+		len += 6;
+
+	ret = intel_ring_begin(ring, len);
 	if (ret)
 		goto err_unpin;
 
+	/* Unmask the flip-done completion message. Note that the bspec says that
+	 * we should do this for both the BCS and RCS, and that we must not unmask
+	 * more than one flip event at any time (or ensure that one flip message
+	 * can be sent by waiting for flip-done prior to queueing new flips).
+	 * Experimentation says that BCS works despite DERRMR masking all
+	 * flip-done completion events and that unmasking all planes at once
+	 * for the RCS also doesn't appear to drop events. Setting the DERRMR
+	 * to zero does lead to lockups within MI_DISPLAY_FLIP.
+	 */
+	if (ring->id == RCS) {
+		intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
+		intel_ring_emit(ring, DERRMR);
+		intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
+					DERRMR_PIPEB_PRI_FLIP_DONE |
+					DERRMR_PIPEC_PRI_FLIP_DONE));
+		intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1));
+		intel_ring_emit(ring, DERRMR);
+		intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
+	}
+
 	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
 	intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
 	intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
@@ -8180,9 +8199,10 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 		      pipe_config->gmch_pfit.control,
 		      pipe_config->gmch_pfit.pgm_ratios,
 		      pipe_config->gmch_pfit.lvds_border_bits);
-	DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x\n",
+	DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
 		      pipe_config->pch_pfit.pos,
-		      pipe_config->pch_pfit.size);
+		      pipe_config->pch_pfit.size,
+		      pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
 	DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
 }
 
@@ -8578,8 +8598,11 @@ intel_pipe_config_compare(struct drm_device *dev,
 	if (INTEL_INFO(dev)->gen < 4)
 		PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
 	PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
-	PIPE_CONF_CHECK_I(pch_pfit.pos);
-	PIPE_CONF_CHECK_I(pch_pfit.size);
+	PIPE_CONF_CHECK_I(pch_pfit.enabled);
+	if (current_config->pch_pfit.enabled) {
+		PIPE_CONF_CHECK_I(pch_pfit.pos);
+		PIPE_CONF_CHECK_I(pch_pfit.size);
+	}
 
 	PIPE_CONF_CHECK_I(ips_enabled);