diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 672 |
1 files changed, 456 insertions, 216 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3d704b706a8d..b73971234013 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -52,30 +52,6 @@ static bool is_edp(struct intel_dp *intel_dp) return intel_dig_port->base.type == INTEL_OUTPUT_EDP; } -/** - * is_pch_edp - is the port on the PCH and attached to an eDP panel? - * @intel_dp: DP struct - * - * Returns true if the given DP struct corresponds to a PCH DP port attached - * to an eDP panel, false otherwise. Helpful for determining whether we - * may need FDI resources for a given DP output or not. - */ -static bool is_pch_edp(struct intel_dp *intel_dp) -{ - return intel_dp->is_pch_edp; -} - -/** - * is_cpu_edp - is the port on the CPU and attached to an eDP panel? - * @intel_dp: DP struct - * - * Returns true if the given DP struct corresponds to a CPU eDP port. - */ -static bool is_cpu_edp(struct intel_dp *intel_dp) -{ - return is_edp(intel_dp) && !is_pch_edp(intel_dp); -} - static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); @@ -88,25 +64,6 @@ static struct intel_dp *intel_attached_dp(struct drm_connector *connector) return enc_to_intel_dp(&intel_attached_encoder(connector)->base); } -/** - * intel_encoder_is_pch_edp - is the given encoder a PCH attached eDP? - * @encoder: DRM encoder - * - * Return true if @encoder corresponds to a PCH attached eDP panel. Needed - * by intel_display.c. - */ -bool intel_encoder_is_pch_edp(struct drm_encoder *encoder) -{ - struct intel_dp *intel_dp; - - if (!encoder) - return false; - - intel_dp = enc_to_intel_dp(encoder); - - return is_pch_edp(intel_dp); -} - static void intel_dp_link_down(struct intel_dp *intel_dp); static int @@ -303,7 +260,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, - msecs_to_jiffies(10)); + msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) @@ -344,11 +301,12 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, * Note that PCH attached eDP panels should use a 125MHz input * clock divider. */ - if (is_cpu_edp(intel_dp)) { + if (IS_VALLEYVIEW(dev)) { + aux_clock_divider = 100; + } else if (intel_dig_port->port == PORT_A) { if (HAS_DDI(dev)) - aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1; - else if (IS_VALLEYVIEW(dev)) - aux_clock_divider = 100; + aux_clock_divider = DIV_ROUND_CLOSEST( + intel_ddi_get_cdclk_freq(dev_priv), 2000); else if (IS_GEN6(dev) || IS_GEN7(dev)) aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */ else @@ -660,6 +618,49 @@ intel_dp_i2c_init(struct intel_dp *intel_dp, return ret; } +static void +intel_dp_set_clock(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config, int link_bw) +{ + struct drm_device *dev = encoder->base.dev; + + if (IS_G4X(dev)) { + if (link_bw == DP_LINK_BW_1_62) { + pipe_config->dpll.p1 = 2; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.n = 2; + pipe_config->dpll.m1 = 23; + pipe_config->dpll.m2 = 8; + } else { + pipe_config->dpll.p1 = 1; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.n = 1; + pipe_config->dpll.m1 = 14; + pipe_config->dpll.m2 = 2; + } + pipe_config->clock_set = true; + } else if (IS_HASWELL(dev)) { + /* Haswell has special-purpose DP DDI clocks. */ + } else if (HAS_PCH_SPLIT(dev)) { + if (link_bw == DP_LINK_BW_1_62) { + pipe_config->dpll.n = 1; + pipe_config->dpll.p1 = 2; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.m1 = 12; + pipe_config->dpll.m2 = 9; + } else { + pipe_config->dpll.n = 2; + pipe_config->dpll.p1 = 1; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.m1 = 14; + pipe_config->dpll.m2 = 8; + } + pipe_config->clock_set = true; + } else if (IS_VALLEYVIEW(dev)) { + /* FIXME: Need to figure out optimized DP clocks for vlv. */ + } +} + bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) @@ -667,17 +668,18 @@ intel_dp_compute_config(struct intel_encoder *encoder, struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; - struct drm_display_mode *mode = &pipe_config->requested_mode; struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + struct intel_crtc *intel_crtc = encoder->new_crtc; struct intel_connector *intel_connector = intel_dp->attached_connector; int lane_count, clock; int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; int bpp, mode_rate; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; - int target_clock, link_avail, link_clock; + int link_avail, link_clock; - if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A) pipe_config->has_pch_encoder = true; pipe_config->has_dp_encoder = true; @@ -685,12 +687,13 @@ intel_dp_compute_config(struct intel_encoder *encoder, if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { intel_fixed_panel_mode(intel_connector->panel.fixed_mode, adjusted_mode); - intel_pch_panel_fitting(dev, - intel_connector->panel.fitting_mode, - mode, adjusted_mode); + if (!HAS_PCH_SPLIT(dev)) + intel_gmch_panel_fitting(intel_crtc, pipe_config, + intel_connector->panel.fitting_mode); + else + intel_pch_panel_fitting(intel_crtc, pipe_config, + intel_connector->panel.fitting_mode); } - /* We need to take the panel's fixed mode into account. */ - target_clock = adjusted_mode->clock; if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) return false; @@ -701,12 +704,12 @@ intel_dp_compute_config(struct intel_encoder *encoder, /* Walk through all bpp values. Luckily they're all nicely spaced with 2 * bpc in between. */ - bpp = min_t(int, 8*3, pipe_config->pipe_bpp); - if (is_edp(intel_dp) && dev_priv->edp.bpp) - bpp = min_t(int, bpp, dev_priv->edp.bpp); + bpp = pipe_config->pipe_bpp; + if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp) + bpp = min_t(int, bpp, dev_priv->vbt.edp_bpp); for (; bpp >= 6*3; bpp -= 2*3) { - mode_rate = intel_dp_link_required(target_clock, bpp); + mode_rate = intel_dp_link_required(adjusted_mode->clock, bpp); for (clock = 0; clock <= max_clock; clock++) { for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { @@ -741,20 +744,21 @@ found: intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; - adjusted_mode->clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw); pipe_config->pipe_bpp = bpp; - pipe_config->pixel_target_clock = target_clock; + pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw); DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n", intel_dp->link_bw, intel_dp->lane_count, - adjusted_mode->clock, bpp); + pipe_config->port_clock, bpp); DRM_DEBUG_KMS("DP link bw required %i available %i\n", mode_rate, link_avail); intel_link_compute_m_n(bpp, lane_count, - target_clock, adjusted_mode->clock, + adjusted_mode->clock, pipe_config->port_clock, &pipe_config->dp_m_n); + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); + return true; } @@ -773,24 +777,28 @@ void intel_dp_init_link_config(struct intel_dp *intel_dp) } } -static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) +static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp) { - struct drm_device *dev = crtc->dev; + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; - DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock); + DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", crtc->config.port_clock); dpa_ctl = I915_READ(DP_A); dpa_ctl &= ~DP_PLL_FREQ_MASK; - if (clock < 200000) { + if (crtc->config.port_clock == 162000) { /* For a long time we've carried around a ILK-DevA w/a for the * 160MHz clock. If we're really unlucky, it's still required. */ DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n"); dpa_ctl |= DP_PLL_FREQ_160MHZ; + intel_dp->DP |= DP_PLL_FREQ_160MHZ; } else { dpa_ctl |= DP_PLL_FREQ_270MHZ; + intel_dp->DP |= DP_PLL_FREQ_270MHZ; } I915_WRITE(DP_A, dpa_ctl); @@ -806,8 +814,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_crtc *crtc = encoder->crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + enum port port = dp_to_dig_port(intel_dp)->port; + struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); /* * There are four kinds of DP registers: @@ -833,21 +841,11 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* Handle DP bits in common between all three register formats */ intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count); - switch (intel_dp->lane_count) { - case 1: - intel_dp->DP |= DP_PORT_WIDTH_1; - break; - case 2: - intel_dp->DP |= DP_PORT_WIDTH_2; - break; - case 4: - intel_dp->DP |= DP_PORT_WIDTH_4; - break; - } if (intel_dp->has_audio) { DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", - pipe_name(intel_crtc->pipe)); + pipe_name(crtc->pipe)); intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; intel_write_eld(encoder, adjusted_mode); } @@ -856,7 +854,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* Split out the IBX/CPU vs CPT settings */ - if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { + if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) intel_dp->DP |= DP_SYNC_HS_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) @@ -866,14 +864,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) intel_dp->DP |= DP_ENHANCED_FRAMING; - intel_dp->DP |= intel_crtc->pipe << 29; - - /* don't miss out required setting for eDP */ - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; - } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + intel_dp->DP |= crtc->pipe << 29; + } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev)) intel_dp->DP |= intel_dp->color_range; @@ -886,22 +878,14 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) intel_dp->DP |= DP_ENHANCED_FRAMING; - if (intel_crtc->pipe == 1) + if (crtc->pipe == 1) intel_dp->DP |= DP_PIPEB_SELECT; - - if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { - /* don't miss out required setting for eDP */ - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; - } } else { intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } - if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) - ironlake_set_pll_edp(crtc, adjusted_mode->clock); + if (port == PORT_A && !IS_VALLEYVIEW(dev)) + ironlake_set_pll_cpu_edp(intel_dp); } #define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) @@ -1290,6 +1274,7 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp = I915_READ(intel_dp->output_reg); @@ -1297,9 +1282,9 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, if (!(tmp & DP_PORT_EN)) return false; - if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { + if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { *pipe = PORT_TO_PIPE_CPT(tmp); - } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { *pipe = PORT_TO_PIPE(tmp); } else { u32 trans_sel; @@ -1335,9 +1320,48 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, return true; } +static void intel_dp_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + u32 tmp, flags = 0; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum port port = dp_to_dig_port(intel_dp)->port; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + + if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { + tmp = I915_READ(intel_dp->output_reg); + if (tmp & DP_SYNC_HS_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (tmp & DP_SYNC_VS_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + } else { + tmp = I915_READ(TRANS_DP_CTL(crtc->pipe)); + if (tmp & TRANS_DP_HSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (tmp & TRANS_DP_VSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + } + + pipe_config->adjusted_mode.flags |= flags; +} + static void intel_disable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; + struct drm_device *dev = encoder->base.dev; /* Make sure the panel is off before trying to change the mode. But also * ensure that we have vdd while we switch off the panel. */ @@ -1347,16 +1371,17 @@ static void intel_disable_dp(struct intel_encoder *encoder) ironlake_edp_panel_off(intel_dp); /* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */ - if (!is_cpu_edp(intel_dp)) + if (!(port == PORT_A || IS_VALLEYVIEW(dev))) intel_dp_link_down(intel_dp); } static void intel_post_disable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + enum port port = dp_to_dig_port(intel_dp)->port; struct drm_device *dev = encoder->base.dev; - if (is_cpu_edp(intel_dp)) { + if (port == PORT_A || IS_VALLEYVIEW(dev)) { intel_dp_link_down(intel_dp); if (!IS_VALLEYVIEW(dev)) ironlake_edp_pll_off(intel_dp); @@ -1381,15 +1406,73 @@ static void intel_enable_dp(struct intel_encoder *encoder) intel_dp_complete_link_train(intel_dp); intel_dp_stop_link_train(intel_dp); ironlake_edp_backlight_on(intel_dp); + + if (IS_VALLEYVIEW(dev)) { + struct intel_digital_port *dport = + enc_to_dig_port(&encoder->base); + int channel = vlv_dport_to_channel(dport); + + vlv_wait_port_ready(dev_priv, channel); + } } static void intel_pre_enable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; - if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) + if (dport->port == PORT_A && !IS_VALLEYVIEW(dev)) ironlake_edp_pll_on(intel_dp); + + if (IS_VALLEYVIEW(dev)) { + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + int port = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + u32 val; + + val = vlv_dpio_read(dev_priv, DPIO_DATA_LANE_A(port)); + val = 0; + if (pipe) + val |= (1<<21); + else + val &= ~(1<<21); + val |= 0x001000c4; + vlv_dpio_write(dev_priv, DPIO_DATA_CHANNEL(port), val); + + vlv_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF0(port), + 0x00760018); + vlv_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF8(port), + 0x00400888); + } +} + +static void intel_dp_pre_pll_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int port = vlv_dport_to_channel(dport); + + if (!IS_VALLEYVIEW(dev)) + return; + + /* Program Tx lane resets to default */ + vlv_dpio_write(dev_priv, DPIO_PCS_TX(port), + DPIO_PCS_TX_LANE2_RESET | + DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, DPIO_PCS_CLK(port), + DPIO_PCS_CLK_CRI_RXEB_EIOS_EN | + DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN | + (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) | + DPIO_PCS_CLK_SOFT_RESET); + + /* Fix up inter-pair skew failure */ + vlv_dpio_write(dev_priv, DPIO_PCS_STAGGER1(port), 0x00750f00); + vlv_dpio_write(dev_priv, DPIO_TX_CTL(port), 0x00001500); + vlv_dpio_write(dev_priv, DPIO_TX_LANE(port), 0x40400000); } /* @@ -1451,10 +1534,13 @@ static uint8_t intel_dp_voltage_max(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); + enum port port = dp_to_dig_port(intel_dp)->port; - if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) + if (IS_VALLEYVIEW(dev)) + return DP_TRAIN_VOLTAGE_SWING_1200; + else if (IS_GEN7(dev) && port == PORT_A) return DP_TRAIN_VOLTAGE_SWING_800; - else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + else if (HAS_PCH_CPT(dev) && port != PORT_A) return DP_TRAIN_VOLTAGE_SWING_1200; else return DP_TRAIN_VOLTAGE_SWING_800; @@ -1464,6 +1550,7 @@ static uint8_t intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) { struct drm_device *dev = intel_dp_to_dev(intel_dp); + enum port port = dp_to_dig_port(intel_dp)->port; if (HAS_DDI(dev)) { switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { @@ -1477,7 +1564,19 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) default: return DP_TRAIN_PRE_EMPHASIS_0; } - } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { + } else if (IS_VALLEYVIEW(dev)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_9_5; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else if (IS_GEN7(dev) && port == PORT_A) { switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { case DP_TRAIN_VOLTAGE_SWING_400: return DP_TRAIN_PRE_EMPHASIS_6; @@ -1502,6 +1601,101 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) } } +static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + unsigned long demph_reg_value, preemph_reg_value, + uniqtranscale_reg_value; + uint8_t train_set = intel_dp->train_set[0]; + int port = vlv_dport_to_channel(dport); + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + preemph_reg_value = 0x0004000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x2B405555; + uniqtranscale_reg_value = 0x552AB83A; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x5548B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + demph_reg_value = 0x2B245555; + uniqtranscale_reg_value = 0x5560B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + demph_reg_value = 0x2B405555; + uniqtranscale_reg_value = 0x5598DA3A; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + preemph_reg_value = 0x0002000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x5552B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + demph_reg_value = 0x2B404848; + uniqtranscale_reg_value = 0x5580B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_6: + preemph_reg_value = 0x0000000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x2B305555; + uniqtranscale_reg_value = 0x5570B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + demph_reg_value = 0x2B2B4040; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + preemph_reg_value = 0x0006000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + demph_reg_value = 0x1B405555; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return 0; + } + break; + default: + return 0; + } + + vlv_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0x00000000); + vlv_dpio_write(dev_priv, DPIO_TX_SWING_CTL4(port), demph_reg_value); + vlv_dpio_write(dev_priv, DPIO_TX_SWING_CTL2(port), + uniqtranscale_reg_value); + vlv_dpio_write(dev_priv, DPIO_TX_SWING_CTL3(port), 0x0C782040); + vlv_dpio_write(dev_priv, DPIO_PCS_STAGGER0(port), 0x00030000); + vlv_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port), preemph_reg_value); + vlv_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0x80000000); + + return 0; +} + static void intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { @@ -1669,6 +1863,7 @@ static void intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->port; struct drm_device *dev = intel_dig_port->base.base.dev; uint32_t signal_levels, mask; uint8_t train_set = intel_dp->train_set[0]; @@ -1676,10 +1871,13 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) if (HAS_DDI(dev)) { signal_levels = intel_hsw_signal_levels(train_set); mask = DDI_BUF_EMP_MASK; - } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { + } else if (IS_VALLEYVIEW(dev)) { + signal_levels = intel_vlv_signal_levels(intel_dp); + mask = 0; + } else if (IS_GEN7(dev) && port == PORT_A) { signal_levels = intel_gen7_edp_signal_levels(train_set); mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB; - } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { + } else if (IS_GEN6(dev) && port == PORT_A) { signal_levels = intel_gen6_edp_signal_levels(train_set); mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB; } else { @@ -1729,8 +1927,7 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, } I915_WRITE(DP_TP_CTL(port), temp); - } else if (HAS_PCH_CPT(dev) && - (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) { + } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) { dp_reg_value &= ~DP_LINK_TRAIN_MASK_CPT; switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { @@ -1981,6 +2178,7 @@ static void intel_dp_link_down(struct intel_dp *intel_dp) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->port; struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = @@ -2010,7 +2208,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) DRM_DEBUG_KMS("\n"); - if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) { + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) { DP &= ~DP_LINK_TRAIN_MASK_CPT; I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT); } else { @@ -2301,11 +2499,10 @@ intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) return NULL; size = (intel_connector->edid->extensions + 1) * EDID_LENGTH; - edid = kmalloc(size, GFP_KERNEL); + edid = kmemdup(intel_connector->edid, size, GFP_KERNEL); if (!edid) return NULL; - memcpy(edid, intel_connector->edid, size); return edid; } @@ -2499,15 +2696,16 @@ done: } static void -intel_dp_destroy(struct drm_connector *connector) +intel_dp_connector_destroy(struct drm_connector *connector) { - struct intel_dp *intel_dp = intel_attached_dp(connector); struct intel_connector *intel_connector = to_intel_connector(connector); if (!IS_ERR_OR_NULL(intel_connector->edid)) kfree(intel_connector->edid); - if (is_edp(intel_dp)) + /* Can't call is_edp() since the encoder may have been destroyed + * already. */ + if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) intel_panel_fini(&intel_connector->panel); drm_sysfs_connector_remove(connector); @@ -2541,7 +2739,7 @@ static const struct drm_connector_funcs intel_dp_connector_funcs = { .detect = intel_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_dp_set_property, - .destroy = intel_dp_destroy, + .destroy = intel_dp_connector_destroy, }; static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { @@ -2588,11 +2786,11 @@ bool intel_dpd_is_edp(struct drm_device *dev) struct child_device_config *p_child; int i; - if (!dev_priv->child_dev_num) + if (!dev_priv->vbt.child_dev_num) return false; - for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + p_child = dev_priv->vbt.child_dev + i; if (p_child->dvo_port == PORT_IDPD && p_child->device_type == DEVICE_TYPE_eDP) @@ -2670,7 +2868,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); - vbt = dev_priv->edp.pps; + vbt = dev_priv->vbt.edp_pps; /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of * our hw here, which are all in 100usec. */ @@ -2738,9 +2936,6 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, pp_div_reg = PIPEA_PP_DIVISOR; } - if (IS_VALLEYVIEW(dev)) - port_sel = I915_READ(pp_on_reg) & 0xc0000000; - /* And finally store the new values in the power sequencer. */ pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); @@ -2754,8 +2949,10 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, /* Haswell doesn't have any port selection bits for the panel * power sequencer any more. */ - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { - if (is_cpu_edp(intel_dp)) + if (IS_VALLEYVIEW(dev)) { + port_sel = I915_READ(pp_on_reg) & 0xc0000000; + } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + if (dp_to_dig_port(intel_dp)->port == PORT_A) port_sel = PANEL_POWER_PORT_DP_A; else port_sel = PANEL_POWER_PORT_DP_D; @@ -2773,7 +2970,85 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, I915_READ(pp_div_reg)); } -void +static bool intel_edp_init_connector(struct intel_dp *intel_dp, + struct intel_connector *intel_connector) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *fixed_mode = NULL; + struct edp_power_seq power_seq = { 0 }; + bool has_dpcd; + struct drm_display_mode *scan; + struct edid *edid; + + if (!is_edp(intel_dp)) + return true; + + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); + + /* Cache DPCD and EDID for edp. */ + ironlake_edp_panel_vdd_on(intel_dp); + has_dpcd = intel_dp_get_dpcd(intel_dp); + ironlake_edp_panel_vdd_off(intel_dp, false); + + if (has_dpcd) { + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) + dev_priv->no_aux_handshake = + intel_dp->dpcd[DP_MAX_DOWNSPREAD] & + DP_NO_AUX_HANDSHAKE_LINK_TRAINING; + } else { + /* if this fails, presume the device is a ghost */ + DRM_INFO("failed to retrieve link info, disabling eDP\n"); + return false; + } + + /* We now know it's not a ghost, init power sequence regs. */ + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + + ironlake_edp_panel_vdd_on(intel_dp); + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + if (drm_add_edid_modes(connector, edid)) { + drm_mode_connector_update_edid_property(connector, + edid); + drm_edid_to_eld(connector, edid); + } else { + kfree(edid); + edid = ERR_PTR(-EINVAL); + } + } else { + edid = ERR_PTR(-ENOENT); + } + intel_connector->edid = edid; + + /* prefer fixed mode from EDID if available */ + list_for_each_entry(scan, &connector->probed_modes, head) { + if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { + fixed_mode = drm_mode_duplicate(dev, scan); + break; + } + } + + /* fallback to VBT if available for eDP */ + if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) { + fixed_mode = drm_mode_duplicate(dev, + dev_priv->vbt.lfp_lvds_vbt_mode); + if (fixed_mode) + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + } + + ironlake_edp_panel_vdd_off(intel_dp, false); + + intel_panel_init(&intel_connector->panel, fixed_mode); + intel_panel_setup_backlight(connector); + + return true; +} + +bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector) { @@ -2782,38 +3057,47 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct intel_encoder *intel_encoder = &intel_dig_port->base; struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_display_mode *fixed_mode = NULL; - struct edp_power_seq power_seq = { 0 }; enum port port = intel_dig_port->port; const char *name = NULL; - int type; + int type, error; /* Preserve the current hw state. */ intel_dp->DP = I915_READ(intel_dp->output_reg); intel_dp->attached_connector = intel_connector; - if (HAS_PCH_SPLIT(dev) && port == PORT_D) - if (intel_dpd_is_edp(dev)) - intel_dp->is_pch_edp = true; - + type = DRM_MODE_CONNECTOR_DisplayPort; /* * FIXME : We need to initialize built-in panels before external panels. * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup */ - if (IS_VALLEYVIEW(dev) && port == PORT_C) { - type = DRM_MODE_CONNECTOR_eDP; - intel_encoder->type = INTEL_OUTPUT_EDP; - } else if (port == PORT_A || is_pch_edp(intel_dp)) { + switch (port) { + case PORT_A: type = DRM_MODE_CONNECTOR_eDP; - intel_encoder->type = INTEL_OUTPUT_EDP; - } else { - /* The intel_encoder->type value may be INTEL_OUTPUT_UNKNOWN for - * DDI or INTEL_OUTPUT_DISPLAYPORT for the older gens, so don't - * rewrite it. - */ - type = DRM_MODE_CONNECTOR_DisplayPort; + break; + case PORT_C: + if (IS_VALLEYVIEW(dev)) + type = DRM_MODE_CONNECTOR_eDP; + break; + case PORT_D: + if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev)) + type = DRM_MODE_CONNECTOR_eDP; + break; + default: /* silence GCC warning */ + break; } + /* + * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but + * for DP the encoder type can be set by the caller to + * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it. + */ + if (type == DRM_MODE_CONNECTOR_eDP) + intel_encoder->type = INTEL_OUTPUT_EDP; + + DRM_DEBUG_KMS("Adding %s connector on port %c\n", + type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", + port_name(port)); + drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); @@ -2873,74 +3157,21 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, BUG(); } - if (is_edp(intel_dp)) - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); - - intel_dp_i2c_init(intel_dp, intel_connector, name); - - /* Cache DPCD and EDID for edp. */ - if (is_edp(intel_dp)) { - bool ret; - struct drm_display_mode *scan; - struct edid *edid; - - ironlake_edp_panel_vdd_on(intel_dp); - ret = intel_dp_get_dpcd(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, false); + error = intel_dp_i2c_init(intel_dp, intel_connector, name); + WARN(error, "intel_dp_i2c_init failed with error %d for port %c\n", + error, port_name(port)); - if (ret) { - if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) - dev_priv->no_aux_handshake = - intel_dp->dpcd[DP_MAX_DOWNSPREAD] & - DP_NO_AUX_HANDSHAKE_LINK_TRAINING; - } else { - /* if this fails, presume the device is a ghost */ - DRM_INFO("failed to retrieve link info, disabling eDP\n"); - intel_dp_encoder_destroy(&intel_encoder->base); - intel_dp_destroy(connector); - return; - } - - /* We now know it's not a ghost, init power sequence regs. */ - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, - &power_seq); - - ironlake_edp_panel_vdd_on(intel_dp); - edid = drm_get_edid(connector, &intel_dp->adapter); - if (edid) { - if (drm_add_edid_modes(connector, edid)) { - drm_mode_connector_update_edid_property(connector, edid); - drm_edid_to_eld(connector, edid); - } else { - kfree(edid); - edid = ERR_PTR(-EINVAL); - } - } else { - edid = ERR_PTR(-ENOENT); + if (!intel_edp_init_connector(intel_dp, intel_connector)) { + i2c_del_adapter(&intel_dp->adapter); + if (is_edp(intel_dp)) { + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + mutex_lock(&dev->mode_config.mutex); + ironlake_panel_vdd_off_sync(intel_dp); + mutex_unlock(&dev->mode_config.mutex); } - intel_connector->edid = edid; - - /* prefer fixed mode from EDID if available */ - list_for_each_entry(scan, &connector->probed_modes, head) { - if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { - fixed_mode = drm_mode_duplicate(dev, scan); - break; - } - } - - /* fallback to VBT if available for eDP */ - if (!fixed_mode && dev_priv->lfp_lvds_vbt_mode) { - fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); - if (fixed_mode) - fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - } - - ironlake_edp_panel_vdd_off(intel_dp, false); - } - - if (is_edp(intel_dp)) { - intel_panel_init(&intel_connector->panel, fixed_mode); - intel_panel_setup_backlight(connector); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + return false; } intel_dp_add_properties(intel_dp, connector); @@ -2953,6 +3184,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, u32 temp = I915_READ(PEG_BAND_GAP_DATA); I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); } + + return true; } void @@ -2986,6 +3219,9 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->disable = intel_disable_dp; intel_encoder->post_disable = intel_post_disable_dp; intel_encoder->get_hw_state = intel_dp_get_hw_state; + intel_encoder->get_config = intel_dp_get_config; + if (IS_VALLEYVIEW(dev)) + intel_encoder->pre_pll_enable = intel_dp_pre_pll_enable; intel_dig_port->port = port; intel_dig_port->dp.output_reg = output_reg; @@ -2995,5 +3231,9 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->cloneable = false; intel_encoder->hot_plug = intel_dp_hot_plug; - intel_dp_init_connector(intel_dig_port, intel_connector); + if (!intel_dp_init_connector(intel_dig_port, intel_connector)) { + drm_encoder_cleanup(encoder); + kfree(intel_dig_port); + kfree(intel_connector); + } } |