diff options
Diffstat (limited to 'drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c')
| -rw-r--r-- | drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 139 |
1 files changed, 84 insertions, 55 deletions
diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index dea3d2e559b1..7f9f4ac88029 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -160,8 +160,7 @@ static void complete_flip(struct drm_crtc *crtc, struct drm_file *file) if (mdp5_crtc->ctl && !crtc->state->enable) { /* set STAGE_UNUSED for all layers */ - mdp5_ctl_blend(mdp5_crtc->ctl, mdp5_crtc->lm, 0x00000000); - mdp5_ctl_release(mdp5_crtc->ctl); + mdp5_ctl_blend(mdp5_crtc->ctl, NULL, 0, 0); mdp5_crtc->ctl = NULL; } } @@ -196,13 +195,9 @@ static bool mdp5_crtc_mode_fixup(struct drm_crtc *crtc, /* * blend_setup() - blend all the planes of a CRTC * - * When border is enabled, the border color will ALWAYS be the base layer. - * Therefore, the first plane (private RGB pipe) will start at STAGE0. - * If disabled, the first plane starts at STAGE_BASE. - * - * Note: - * Border is not enabled here because the private plane is exactly - * the CRTC resolution. + * If no base layer is available, border will be enabled as the base layer. + * Otherwise all layers will be blended based on their stage calculated + * in mdp5_crtc_atomic_check. */ static void blend_setup(struct drm_crtc *crtc) { @@ -210,9 +205,14 @@ static void blend_setup(struct drm_crtc *crtc) struct mdp5_kms *mdp5_kms = get_kms(crtc); struct drm_plane *plane; const struct mdp5_cfg_hw *hw_cfg; - uint32_t lm = mdp5_crtc->lm, blend_cfg = 0; + struct mdp5_plane_state *pstate, *pstates[STAGE_MAX + 1] = {NULL}; + const struct mdp_format *format; + uint32_t lm = mdp5_crtc->lm; + uint32_t blend_op, fg_alpha, bg_alpha, ctl_blend_flags = 0; unsigned long flags; -#define blender(stage) ((stage) - STAGE_BASE) + uint8_t stage[STAGE_MAX + 1]; + int i, plane_cnt = 0; +#define blender(stage) ((stage) - STAGE0) hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); @@ -222,33 +222,73 @@ static void blend_setup(struct drm_crtc *crtc) if (!mdp5_crtc->ctl) goto out; + /* Collect all plane information */ drm_atomic_crtc_for_each_plane(plane, crtc) { - enum mdp_mixer_stage_id stage = - to_mdp5_plane_state(plane->state)->stage; + pstate = to_mdp5_plane_state(plane->state); + pstates[pstate->stage] = pstate; + stage[pstate->stage] = mdp5_plane_pipe(plane); + plane_cnt++; + } - /* - * Note: This cannot happen with current implementation but - * we need to check this condition once z property is added - */ - BUG_ON(stage > hw_cfg->lm.nb_stages); + /* + * If there is no base layer, enable border color. + * Although it's not possbile in current blend logic, + * put it here as a reminder. + */ + if (!pstates[STAGE_BASE] && plane_cnt) { + ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT; + DBG("Border Color is enabled"); + } - /* LM */ - mdp5_write(mdp5_kms, - REG_MDP5_LM_BLEND_OP_MODE(lm, blender(stage)), - MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) | - MDP5_LM_BLEND_OP_MODE_BG_ALPHA(BG_CONST)); + /* The reset for blending */ + for (i = STAGE0; i <= STAGE_MAX; i++) { + if (!pstates[i]) + continue; + + format = to_mdp_format( + msm_framebuffer_format(pstates[i]->base.fb)); + plane = pstates[i]->base.plane; + blend_op = MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) | + MDP5_LM_BLEND_OP_MODE_BG_ALPHA(BG_CONST); + fg_alpha = pstates[i]->alpha; + bg_alpha = 0xFF - pstates[i]->alpha; + DBG("Stage %d fg_alpha %x bg_alpha %x", i, fg_alpha, bg_alpha); + + if (format->alpha_enable && pstates[i]->premultiplied) { + blend_op = MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) | + MDP5_LM_BLEND_OP_MODE_BG_ALPHA(FG_PIXEL); + if (fg_alpha != 0xff) { + bg_alpha = fg_alpha; + blend_op |= + MDP5_LM_BLEND_OP_MODE_BG_MOD_ALPHA | + MDP5_LM_BLEND_OP_MODE_BG_INV_MOD_ALPHA; + } else { + blend_op |= MDP5_LM_BLEND_OP_MODE_BG_INV_ALPHA; + } + } else if (format->alpha_enable) { + blend_op = MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_PIXEL) | + MDP5_LM_BLEND_OP_MODE_BG_ALPHA(FG_PIXEL); + if (fg_alpha != 0xff) { + bg_alpha = fg_alpha; + blend_op |= + MDP5_LM_BLEND_OP_MODE_FG_MOD_ALPHA | + MDP5_LM_BLEND_OP_MODE_FG_INV_MOD_ALPHA | + MDP5_LM_BLEND_OP_MODE_BG_MOD_ALPHA | + MDP5_LM_BLEND_OP_MODE_BG_INV_MOD_ALPHA; + } else { + blend_op |= MDP5_LM_BLEND_OP_MODE_BG_INV_ALPHA; + } + } + + mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_OP_MODE(lm, + blender(i)), blend_op); mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_FG_ALPHA(lm, - blender(stage)), 0xff); + blender(i)), fg_alpha); mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_BG_ALPHA(lm, - blender(stage)), 0x00); - /* CTL */ - blend_cfg |= mdp_ctl_blend_mask(mdp5_plane_pipe(plane), stage); - DBG("%s: blending pipe %s on stage=%d", mdp5_crtc->name, - pipe2name(mdp5_plane_pipe(plane)), stage); + blender(i)), bg_alpha); } - DBG("%s: lm%d: blend config = 0x%08x", mdp5_crtc->name, lm, blend_cfg); - mdp5_ctl_blend(mdp5_crtc->ctl, lm, blend_cfg); + mdp5_ctl_blend(mdp5_crtc->ctl, stage, plane_cnt, ctl_blend_flags); out: spin_unlock_irqrestore(&mdp5_crtc->lm_lock, flags); @@ -339,25 +379,19 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct mdp5_kms *mdp5_kms = get_kms(crtc); struct drm_plane *plane; struct drm_device *dev = crtc->dev; - struct plane_state pstates[STAGE3 + 1]; + struct plane_state pstates[STAGE_MAX + 1]; + const struct mdp5_cfg_hw *hw_cfg; int cnt = 0, i; DBG("%s: check", mdp5_crtc->name); - /* request a free CTL, if none is already allocated for this CRTC */ - if (state->enable && !mdp5_crtc->ctl) { - mdp5_crtc->ctl = mdp5_ctlm_request(mdp5_kms->ctlm, crtc); - if (WARN_ON(!mdp5_crtc->ctl)) - return -EINVAL; - } - /* verify that there are not too many planes attached to crtc * and that we don't have conflicting mixer stages: */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); drm_atomic_crtc_state_for_each_plane(plane, state) { struct drm_plane_state *pstate; - - if (cnt >= ARRAY_SIZE(pstates)) { + if (cnt >= (hw_cfg->lm.nb_stages)) { dev_err(dev->dev, "too many planes!\n"); return -EINVAL; } @@ -369,13 +403,13 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, */ if (!pstate) pstate = plane->state; - pstates[cnt].plane = plane; pstates[cnt].state = to_mdp5_plane_state(pstate); cnt++; } + /* assign a stage based on sorted zpos property */ sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL); for (i = 0; i < cnt; i++) { @@ -388,13 +422,15 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, return 0; } -static void mdp5_crtc_atomic_begin(struct drm_crtc *crtc) +static void mdp5_crtc_atomic_begin(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); DBG("%s: begin", mdp5_crtc->name); } -static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc) +static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); struct drm_device *dev = crtc->dev; @@ -691,8 +727,8 @@ void mdp5_crtc_cancel_pending_flip(struct drm_crtc *crtc, struct drm_file *file) complete_flip(crtc, file); } -/* set interface for routing crtc->encoder: */ -void mdp5_crtc_set_intf(struct drm_crtc *crtc, struct mdp5_interface *intf) +void mdp5_crtc_set_pipeline(struct drm_crtc *crtc, + struct mdp5_interface *intf, struct mdp5_ctl *ctl) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); struct mdp5_kms *mdp5_kms = get_kms(crtc); @@ -715,7 +751,8 @@ void mdp5_crtc_set_intf(struct drm_crtc *crtc, struct mdp5_interface *intf) mdp_irq_update(&mdp5_kms->base); - mdp5_ctl_set_intf(mdp5_crtc->ctl, intf); + mdp5_crtc->ctl = ctl; + mdp5_ctl_set_pipeline(ctl, intf, lm); } int mdp5_crtc_get_lm(struct drm_crtc *crtc) @@ -724,12 +761,6 @@ int mdp5_crtc_get_lm(struct drm_crtc *crtc) return WARN_ON(!crtc) ? -EINVAL : mdp5_crtc->lm; } -struct mdp5_ctl *mdp5_crtc_get_ctl(struct drm_crtc *crtc) -{ - struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); - return WARN_ON(!crtc) ? NULL : mdp5_crtc->ctl; -} - void mdp5_crtc_wait_for_commit_done(struct drm_crtc *crtc) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); @@ -774,7 +805,5 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev, drm_crtc_helper_add(crtc, &mdp5_crtc_helper_funcs); plane->crtc = crtc; - mdp5_plane_install_properties(plane, &crtc->base); - return crtc; } |