diff options
Diffstat (limited to 'drivers/gpu/drm/nouveau/dispnv04/disp.c')
| -rw-r--r-- | drivers/gpu/drm/nouveau/dispnv04/disp.c | 216 |
1 files changed, 161 insertions, 55 deletions
diff --git a/drivers/gpu/drm/nouveau/dispnv04/disp.c b/drivers/gpu/drm/nouveau/dispnv04/disp.c index 1727d399833c..5713bacaee80 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c @@ -30,6 +30,160 @@ #include "hw.h" #include "nouveau_encoder.h" #include "nouveau_connector.h" +#include "nouveau_bo.h" + +#include <nvif/if0004.h> + +static void +nv04_display_fini(struct drm_device *dev, bool suspend) +{ + struct nv04_display *disp = nv04_display(dev); + struct drm_crtc *crtc; + + /* Disable flip completion events. */ + nvif_notify_put(&disp->flip); + + /* Disable vblank interrupts. */ + NVWriteCRTC(dev, 0, NV_PCRTC_INTR_EN_0, 0); + if (nv_two_heads(dev)) + NVWriteCRTC(dev, 1, NV_PCRTC_INTR_EN_0, 0); + + if (!suspend) + return; + + /* Un-pin FB and cursors so they'll be evicted to system memory. */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_framebuffer *nouveau_fb; + + nouveau_fb = nouveau_framebuffer(crtc->primary->fb); + if (!nouveau_fb || !nouveau_fb->nvbo) + continue; + + nouveau_bo_unpin(nouveau_fb->nvbo); + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); + if (nv_crtc->cursor.nvbo) { + if (nv_crtc->cursor.set_offset) + nouveau_bo_unmap(nv_crtc->cursor.nvbo); + nouveau_bo_unpin(nv_crtc->cursor.nvbo); + } + } +} + +static int +nv04_display_init(struct drm_device *dev, bool resume, bool runtime) +{ + struct nv04_display *disp = nv04_display(dev); + struct nouveau_drm *drm = nouveau_drm(dev); + struct nouveau_encoder *encoder; + struct drm_crtc *crtc; + int ret; + + /* meh.. modeset apparently doesn't setup all the regs and depends + * on pre-existing state, for now load the state of the card *before* + * nouveau was loaded, and then do a modeset. + * + * best thing to do probably is to make save/restore routines not + * save/restore "pre-load" state, but more general so we can save + * on suspend too. + */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); + nv_crtc->save(&nv_crtc->base); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.base.head) + encoder->enc_save(&encoder->base.base); + + /* Enable flip completion events. */ + nvif_notify_get(&disp->flip); + + if (!resume) + return 0; + + /* Re-pin FB/cursors. */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_framebuffer *nouveau_fb; + + nouveau_fb = nouveau_framebuffer(crtc->primary->fb); + if (!nouveau_fb || !nouveau_fb->nvbo) + continue; + + ret = nouveau_bo_pin(nouveau_fb->nvbo, TTM_PL_FLAG_VRAM, true); + if (ret) + NV_ERROR(drm, "Could not pin framebuffer\n"); + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); + if (!nv_crtc->cursor.nvbo) + continue; + + ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM, true); + if (!ret && nv_crtc->cursor.set_offset) + ret = nouveau_bo_map(nv_crtc->cursor.nvbo); + if (ret) + NV_ERROR(drm, "Could not pin/map cursor.\n"); + } + + /* Force CLUT to get re-loaded during modeset. */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); + + nv_crtc->lut.depth = 0; + } + + /* This should ensure we don't hit a locking problem when someone + * wakes us up via a connector. We should never go into suspend + * while the display is on anyways. + */ + if (runtime) + return 0; + + /* Restore mode. */ + drm_helper_resume_force_mode(dev); + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); + + if (!nv_crtc->cursor.nvbo) + continue; + + if (nv_crtc->cursor.set_offset) + nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.nvbo->bo.offset); + nv_crtc->cursor.set_pos(nv_crtc, nv_crtc->cursor_saved_x, + nv_crtc->cursor_saved_y); + } + + return 0; +} + +static void +nv04_display_destroy(struct drm_device *dev) +{ + struct nv04_display *disp = nv04_display(dev); + struct nouveau_drm *drm = nouveau_drm(dev); + struct nouveau_encoder *encoder; + struct nouveau_crtc *nv_crtc; + + /* Restore state */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.base.head) + encoder->enc_restore(&encoder->base.base); + + list_for_each_entry(nv_crtc, &dev->mode_config.crtc_list, base.head) + nv_crtc->restore(&nv_crtc->base); + + nouveau_hw_save_vga_fonts(dev, 0); + + nvif_notify_fini(&disp->flip); + + nouveau_display(dev)->priv = NULL; + kfree(disp); + + nvif_object_unmap(&drm->client.device.object); +} int nv04_display_create(struct drm_device *dev) @@ -58,6 +212,13 @@ nv04_display_create(struct drm_device *dev) /* Pre-nv50 doesn't support atomic, so don't expose the ioctls */ dev->driver->driver_features &= ~DRIVER_ATOMIC; + /* Request page flip completion event. */ + if (drm->nvsw.client) { + nvif_notify_init(&drm->nvsw, nv04_flip_complete, + false, NV04_NVSW_NTFY_UEVENT, + NULL, 0, 0, &disp->flip); + } + nouveau_hw_save_vga_fonts(dev, 1); nv04_crtc_create(dev, 0); @@ -121,58 +282,3 @@ nv04_display_create(struct drm_device *dev) return 0; } - -void -nv04_display_destroy(struct drm_device *dev) -{ - struct nv04_display *disp = nv04_display(dev); - struct nouveau_drm *drm = nouveau_drm(dev); - struct nouveau_encoder *encoder; - struct nouveau_crtc *nv_crtc; - - /* Restore state */ - list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.base.head) - encoder->enc_restore(&encoder->base.base); - - list_for_each_entry(nv_crtc, &dev->mode_config.crtc_list, base.head) - nv_crtc->restore(&nv_crtc->base); - - nouveau_hw_save_vga_fonts(dev, 0); - - nouveau_display(dev)->priv = NULL; - kfree(disp); - - nvif_object_unmap(&drm->client.device.object); -} - -int -nv04_display_init(struct drm_device *dev) -{ - struct nouveau_encoder *encoder; - struct nouveau_crtc *crtc; - - /* meh.. modeset apparently doesn't setup all the regs and depends - * on pre-existing state, for now load the state of the card *before* - * nouveau was loaded, and then do a modeset. - * - * best thing to do probably is to make save/restore routines not - * save/restore "pre-load" state, but more general so we can save - * on suspend too. - */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) - crtc->save(&crtc->base); - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.base.head) - encoder->enc_save(&encoder->base.base); - - return 0; -} - -void -nv04_display_fini(struct drm_device *dev) -{ - /* disable vblank interrupts */ - NVWriteCRTC(dev, 0, NV_PCRTC_INTR_EN_0, 0); - if (nv_two_heads(dev)) - NVWriteCRTC(dev, 1, NV_PCRTC_INTR_EN_0, 0); -} |