diff options
Diffstat (limited to 'drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c')
| -rw-r--r-- | drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c deleted file mode 100644 index 70abf1ec7c98..000000000000 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Copyright 2012 Red Hat Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: Ben Skeggs - */ -#include "priv.h" - -#include <subdev/bios.h> -#include <subdev/bus.h> -#include <subdev/gpio.h> -#include <subdev/i2c.h> -#include <subdev/fuse.h> -#include <subdev/clk.h> -#include <subdev/therm.h> -#include <subdev/mxm.h> -#include <subdev/devinit.h> -#include <subdev/mc.h> -#include <subdev/timer.h> -#include <subdev/fb.h> -#include <subdev/ltc.h> -#include <subdev/ibus.h> -#include <subdev/instmem.h> -#include <subdev/mmu.h> -#include <subdev/bar.h> -#include <subdev/pmu.h> -#include <subdev/volt.h> - -#include <engine/dmaobj.h> -#include <engine/fifo.h> -#include <engine/sw.h> -#include <engine/gr.h> -#include <engine/disp.h> -#include <engine/ce.h> -#include <engine/bsp.h> -#include <engine/msvld.h> -#include <engine/mspdec.h> -#include <engine/msppp.h> -#include <engine/pm.h> - -int -gm100_identify(struct nvkm_device *device) -{ - switch (device->chipset) { - case 0x117: - device->cname = "GM107"; - device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass; - device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; - device->oclass[NVDEV_SUBDEV_I2C ] = gf110_i2c_oclass; - device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; - device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass; - device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; - device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; - device->oclass[NVDEV_SUBDEV_DEVINIT] = gm107_devinit_oclass; - device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; - device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass; - device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; - device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass; - device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; - device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; - device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; - device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; - device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass; - device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; - -#if 0 - device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; -#endif - device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; - device->oclass[NVDEV_ENGINE_FIFO ] = gk208_fifo_oclass; - device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; - device->oclass[NVDEV_ENGINE_GR ] = gm107_gr_oclass; - device->oclass[NVDEV_ENGINE_DISP ] = gm107_disp_oclass; - device->oclass[NVDEV_ENGINE_CE0 ] = &gk104_ce0_oclass; -#if 0 - device->oclass[NVDEV_ENGINE_CE1 ] = &gk104_ce1_oclass; -#endif - device->oclass[NVDEV_ENGINE_CE2 ] = &gk104_ce2_oclass; -#if 0 - device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; - device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; - device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; -#endif - break; - case 0x124: - device->cname = "GM204"; - device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass; - device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; - device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass; - device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; -#if 0 - /* looks to be some non-trivial changes */ - device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass; - /* priv ring says no to 0x10eb14 writes */ - device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; -#endif - device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; - device->oclass[NVDEV_SUBDEV_DEVINIT] = gm204_devinit_oclass; - device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; - device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass; - device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; - device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass; - device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; - device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; - device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; - device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; - device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass; - device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; -#if 0 - device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; -#endif - device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; - device->oclass[NVDEV_ENGINE_FIFO ] = gm204_fifo_oclass; - device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; - device->oclass[NVDEV_ENGINE_GR ] = gm204_gr_oclass; - device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass; - device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass; - device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass; - device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass; -#if 0 - device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; - device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; - device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; -#endif - break; - case 0x126: - device->cname = "GM206"; - device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass; - device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; - device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass; - device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; -#if 0 - /* looks to be some non-trivial changes */ - device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass; - /* priv ring says no to 0x10eb14 writes */ - device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; -#endif - device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; - device->oclass[NVDEV_SUBDEV_DEVINIT] = gm204_devinit_oclass; - device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; - device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass; - device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; - device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass; - device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; - device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; - device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; - device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; - device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass; - device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; -#if 0 - device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; -#endif - device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; - device->oclass[NVDEV_ENGINE_FIFO ] = gm204_fifo_oclass; - device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; - device->oclass[NVDEV_ENGINE_GR ] = gm206_gr_oclass; - device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass; - device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass; - device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass; - device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass; -#if 0 - device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; - device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; - device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; -#endif - break; - default: - nv_fatal(device, "unknown Maxwell chipset\n"); - return -EINVAL; - } - - return 0; -} |