diff options
Diffstat (limited to 'drivers/gpu/drm/rcar-du/rcar_lvds.c')
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_lvds.c | 103 |
1 files changed, 88 insertions, 15 deletions
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c index 534a128a869d..7ef97b2a6eda 100644 --- a/drivers/gpu/drm/rcar-du/rcar_lvds.c +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c @@ -10,6 +10,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_graph.h> @@ -19,9 +20,10 @@ #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_bridge.h> -#include <drm/drm_crtc_helper.h> #include <drm/drm_panel.h> +#include <drm/drm_probe_helper.h> +#include "rcar_lvds.h" #include "rcar_lvds_regs.h" struct rcar_lvds; @@ -182,8 +184,9 @@ struct pll_info { static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk, unsigned long target, struct pll_info *pll, - u32 clksel) + u32 clksel, bool dot_clock_only) { + unsigned int div7 = dot_clock_only ? 1 : 7; unsigned long output; unsigned long fin; unsigned int m_min; @@ -217,9 +220,9 @@ static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk, * `------------> | | * |/ * - * The /7 divider is optional when the LVDS PLL is used to generate a - * dot clock for the DU RGB output, without using the LVDS encoder. We - * don't support this configuration yet. + * The /7 divider is optional, it is enabled when the LVDS PLL is used + * to drive the LVDS encoder, and disabled when used to generate a dot + * clock for the DU RGB output, without using the LVDS encoder. * * The PLL allowed input frequency range is 12 MHz to 192 MHz. */ @@ -279,7 +282,7 @@ static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk, * the PLL, followed by a an optional fixed /7 * divider. */ - fout = fvco / (1 << e) / 7; + fout = fvco / (1 << e) / div7; div = DIV_ROUND_CLOSEST(fout, target); diff = abs(fout / div - target); @@ -300,7 +303,7 @@ static void rcar_lvds_d3_e3_pll_calc(struct rcar_lvds *lvds, struct clk *clk, done: output = fin * pll->pll_n / pll->pll_m / (1 << pll->pll_e) - / 7 / pll->div; + / div7 / pll->div; error = (long)(output - target) * 10000 / (long)target; dev_dbg(lvds->dev, @@ -310,17 +313,18 @@ done: pll->pll_m, pll->pll_n, pll->pll_e, pll->div); } -static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq) +static void __rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, + unsigned int freq, bool dot_clock_only) { struct pll_info pll = { .diff = (unsigned long)-1 }; u32 lvdpllcr; rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[0], freq, &pll, - LVDPLLCR_CKSEL_DU_DOTCLKIN(0)); + LVDPLLCR_CKSEL_DU_DOTCLKIN(0), dot_clock_only); rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.dotclkin[1], freq, &pll, - LVDPLLCR_CKSEL_DU_DOTCLKIN(1)); + LVDPLLCR_CKSEL_DU_DOTCLKIN(1), dot_clock_only); rcar_lvds_d3_e3_pll_calc(lvds, lvds->clocks.extal, freq, &pll, - LVDPLLCR_CKSEL_EXTAL); + LVDPLLCR_CKSEL_EXTAL, dot_clock_only); lvdpllcr = LVDPLLCR_PLLON | pll.clksel | LVDPLLCR_CLKOUT | LVDPLLCR_PLLN(pll.pll_n - 1) | LVDPLLCR_PLLM(pll.pll_m - 1); @@ -329,6 +333,9 @@ static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq) lvdpllcr |= LVDPLLCR_STP_CLKOUTE | LVDPLLCR_OUTCLKSEL | LVDPLLCR_PLLE(pll.pll_e - 1); + if (dot_clock_only) + lvdpllcr |= LVDPLLCR_OCKSEL; + rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr); if (pll.div > 1) @@ -342,6 +349,57 @@ static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq) rcar_lvds_write(lvds, LVDDIV, 0); } +static void rcar_lvds_pll_setup_d3_e3(struct rcar_lvds *lvds, unsigned int freq) +{ + __rcar_lvds_pll_setup_d3_e3(lvds, freq, false); +} + +/* ----------------------------------------------------------------------------- + * Clock - D3/E3 only + */ + +int rcar_lvds_clk_enable(struct drm_bridge *bridge, unsigned long freq) +{ + struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); + int ret; + + if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL))) + return -ENODEV; + + dev_dbg(lvds->dev, "enabling LVDS PLL, freq=%luHz\n", freq); + + WARN_ON(lvds->enabled); + + ret = clk_prepare_enable(lvds->clocks.mod); + if (ret < 0) + return ret; + + __rcar_lvds_pll_setup_d3_e3(lvds, freq, true); + + lvds->enabled = true; + return 0; +} +EXPORT_SYMBOL_GPL(rcar_lvds_clk_enable); + +void rcar_lvds_clk_disable(struct drm_bridge *bridge) +{ + struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); + + if (WARN_ON(!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL))) + return; + + dev_dbg(lvds->dev, "disabling LVDS PLL\n"); + + WARN_ON(!lvds->enabled); + + rcar_lvds_write(lvds, LVDPLLCR, 0); + + clk_disable_unprepare(lvds->clocks.mod); + + lvds->enabled = false; +} +EXPORT_SYMBOL_GPL(rcar_lvds_clk_disable); + /* ----------------------------------------------------------------------------- * Bridge */ @@ -520,8 +578,8 @@ static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds) } static void rcar_lvds_mode_set(struct drm_bridge *bridge, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) + const struct drm_display_mode *mode, + const struct drm_display_mode *adjusted_mode) { struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); @@ -544,7 +602,10 @@ static int rcar_lvds_attach(struct drm_bridge *bridge) return drm_bridge_attach(bridge->encoder, lvds->next_bridge, bridge); - /* Otherwise we have a panel, create a connector. */ + /* Otherwise if we have a panel, create a connector. */ + if (!lvds->panel) + return 0; + ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs, DRM_MODE_CONNECTOR_LVDS); if (ret < 0) @@ -592,7 +653,8 @@ static int rcar_lvds_parse_dt(struct rcar_lvds *lvds) local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0); if (!local_output) { dev_dbg(lvds->dev, "unconnected port@1\n"); - return -ENODEV; + ret = -ENODEV; + goto done; } /* @@ -642,6 +704,15 @@ done: of_node_put(remote_input); of_node_put(remote); + /* + * On D3/E3 the LVDS encoder provides a clock to the DU, which can be + * used for the DPAD output even when the LVDS output is not connected. + * Don't fail probe in that case as the DU will need the bridge to + * control the clock. + */ + if (lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL) + return ret == -ENODEV ? 0 : ret; + return ret; } @@ -785,6 +856,8 @@ static const struct rcar_lvds_device_info rcar_lvds_r8a77995_info = { static const struct of_device_id rcar_lvds_of_table[] = { { .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info }, + { .compatible = "renesas,r8a7744-lvds", .data = &rcar_lvds_gen2_info }, + { .compatible = "renesas,r8a774c0-lvds", .data = &rcar_lvds_r8a77990_info }, { .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info }, { .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info }, { .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info }, |