1 files changed, 292 insertions, 40 deletions

diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
index 546eb92a94e8..1d08ba381098 100644
--- a/drivers/gpu/drm/zte/zx_plane.c
+++ b/drivers/gpu/drm/zte/zx_plane.c
@@ -21,16 +21,6 @@
 #include "zx_plane_regs.h"
 #include "zx_vou.h"
 
-struct zx_plane {
-	struct drm_plane plane;
-	void __iomem *layer;
-	void __iomem *csc;
-	void __iomem *hbsc;
-	void __iomem *rsz;
-};
-
-#define to_zx_plane(plane)	container_of(plane, struct zx_plane, plane)
-
 static const uint32_t gl_formats[] = {
 	DRM_FORMAT_ARGB8888,
 	DRM_FORMAT_XRGB8888,
@@ -40,6 +30,261 @@ static const uint32_t gl_formats[] = {
 	DRM_FORMAT_ARGB4444,
 };
 
+static const uint32_t vl_formats[] = {
+	DRM_FORMAT_NV12,	/* Semi-planar YUV420 */
+	DRM_FORMAT_YUV420,	/* Planar YUV420 */
+	DRM_FORMAT_YUYV,	/* Packed YUV422 */
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_YUV444,	/* YUV444 8bit */
+	/*
+	 * TODO: add formats below that HW supports:
+	 *  - YUV420 P010
+	 *  - YUV420 Hantro
+	 *  - YUV444 10bit
+	 */
+};
+
+#define FRAC_16_16(mult, div)    (((mult) << 16) / (div))
+
+static int zx_vl_plane_atomic_check(struct drm_plane *plane,
+				    struct drm_plane_state *plane_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_crtc *crtc = plane_state->crtc;
+	struct drm_crtc_state *crtc_state;
+	struct drm_rect clip;
+	int min_scale = FRAC_16_16(1, 8);
+	int max_scale = FRAC_16_16(8, 1);
+
+	if (!crtc || !fb)
+		return 0;
+
+	crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+							crtc);
+	if (WARN_ON(!crtc_state))
+		return -EINVAL;
+
+	/* nothing to check when disabling or disabled */
+	if (!crtc_state->enable)
+		return 0;
+
+	/* plane must be enabled */
+	if (!plane_state->crtc)
+		return -EINVAL;
+
+	clip.x1 = 0;
+	clip.y1 = 0;
+	clip.x2 = crtc_state->adjusted_mode.hdisplay;
+	clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+	return drm_plane_helper_check_state(plane_state, &clip,
+					    min_scale, max_scale,
+					    true, true);
+}
+
+static int zx_vl_get_fmt(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+		return VL_FMT_YUV420;
+	case DRM_FORMAT_YUV420:
+		return VL_YUV420_PLANAR | VL_FMT_YUV420;
+	case DRM_FORMAT_YUYV:
+		return VL_YUV422_YUYV | VL_FMT_YUV422;
+	case DRM_FORMAT_YVYU:
+		return VL_YUV422_YVYU | VL_FMT_YUV422;
+	case DRM_FORMAT_UYVY:
+		return VL_YUV422_UYVY | VL_FMT_YUV422;
+	case DRM_FORMAT_VYUY:
+		return VL_YUV422_VYUY | VL_FMT_YUV422;
+	case DRM_FORMAT_YUV444:
+		return VL_FMT_YUV444_8BIT;
+	default:
+		WARN_ONCE(1, "invalid pixel format %d\n", format);
+		return -EINVAL;
+	}
+}
+
+static inline void zx_vl_set_update(struct zx_plane *zplane)
+{
+	void __iomem *layer = zplane->layer;
+
+	zx_writel_mask(layer + VL_CTRL0, VL_UPDATE, VL_UPDATE);
+}
+
+static inline void zx_vl_rsz_set_update(struct zx_plane *zplane)
+{
+	zx_writel(zplane->rsz + RSZ_VL_ENABLE_CFG, 1);
+}
+
+static int zx_vl_rsz_get_fmt(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_YUV420:
+		return RSZ_VL_FMT_YCBCR420;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_VYUY:
+		return RSZ_VL_FMT_YCBCR422;
+	case DRM_FORMAT_YUV444:
+		return RSZ_VL_FMT_YCBCR444;
+	default:
+		WARN_ONCE(1, "invalid pixel format %d\n", format);
+		return -EINVAL;
+	}
+}
+
+static inline u32 rsz_step_value(u32 src, u32 dst)
+{
+	u32 val = 0;
+
+	if (src == dst)
+		val = 0;
+	else if (src < dst)
+		val = RSZ_PARA_STEP((src << 16) / dst);
+	else if (src > dst)
+		val = RSZ_DATA_STEP(src / dst) |
+		      RSZ_PARA_STEP(((src << 16) / dst) & 0xffff);
+
+	return val;
+}
+
+static void zx_vl_rsz_setup(struct zx_plane *zplane, uint32_t format,
+			    u32 src_w, u32 src_h, u32 dst_w, u32 dst_h)
+{
+	void __iomem *rsz = zplane->rsz;
+	u32 src_chroma_w = src_w;
+	u32 src_chroma_h = src_h;
+	u32 fmt;
+
+	/* Set up source and destination resolution */
+	zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
+	zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
+
+	/* Configure data format for VL RSZ */
+	fmt = zx_vl_rsz_get_fmt(format);
+	if (fmt >= 0)
+		zx_writel_mask(rsz + RSZ_VL_CTRL_CFG, RSZ_VL_FMT_MASK, fmt);
+
+	/* Calculate Chroma height and width */
+	if (fmt == RSZ_VL_FMT_YCBCR420) {
+		src_chroma_w = src_w >> 1;
+		src_chroma_h = src_h >> 1;
+	} else if (fmt == RSZ_VL_FMT_YCBCR422) {
+		src_chroma_w = src_w >> 1;
+	}
+
+	/* Set up Luma and Chroma step registers */
+	zx_writel(rsz + RSZ_VL_LUMA_HOR, rsz_step_value(src_w, dst_w));
+	zx_writel(rsz + RSZ_VL_LUMA_VER, rsz_step_value(src_h, dst_h));
+	zx_writel(rsz + RSZ_VL_CHROMA_HOR, rsz_step_value(src_chroma_w, dst_w));
+	zx_writel(rsz + RSZ_VL_CHROMA_VER, rsz_step_value(src_chroma_h, dst_h));
+
+	zx_vl_rsz_set_update(zplane);
+}
+
+static void zx_vl_plane_atomic_update(struct drm_plane *plane,
+				      struct drm_plane_state *old_state)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+	struct drm_plane_state *state = plane->state;
+	struct drm_framebuffer *fb = state->fb;
+	struct drm_rect *src = &state->src;
+	struct drm_rect *dst = &state->dst;
+	struct drm_gem_cma_object *cma_obj;
+	void __iomem *layer = zplane->layer;
+	void __iomem *hbsc = zplane->hbsc;
+	void __iomem *paddr_reg;
+	dma_addr_t paddr;
+	u32 src_x, src_y, src_w, src_h;
+	u32 dst_x, dst_y, dst_w, dst_h;
+	uint32_t format;
+	u32 fmt;
+	int num_planes;
+	int i;
+
+	if (!fb)
+		return;
+
+	format = fb->format->format;
+
+	src_x = src->x1 >> 16;
+	src_y = src->y1 >> 16;
+	src_w = drm_rect_width(src) >> 16;
+	src_h = drm_rect_height(src) >> 16;
+
+	dst_x = dst->x1;
+	dst_y = dst->y1;
+	dst_w = drm_rect_width(dst);
+	dst_h = drm_rect_height(dst);
+
+	/* Set up data address registers for Y, Cb and Cr planes */
+	num_planes = drm_format_num_planes(format);
+	paddr_reg = layer + VL_Y;
+	for (i = 0; i < num_planes; i++) {
+		cma_obj = drm_fb_cma_get_gem_obj(fb, i);
+		paddr = cma_obj->paddr + fb->offsets[i];
+		paddr += src_y * fb->pitches[i];
+		paddr += src_x * drm_format_plane_cpp(format, i);
+		zx_writel(paddr_reg, paddr);
+		paddr_reg += 4;
+	}
+
+	/* Set up source height/width register */
+	zx_writel(layer + VL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
+
+	/* Set up start position register */
+	zx_writel(layer + VL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
+
+	/* Set up end position register */
+	zx_writel(layer + VL_POS_END,
+		  GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
+
+	/* Strides of Cb and Cr planes should be identical */
+	zx_writel(layer + VL_STRIDE, LUMA_STRIDE(fb->pitches[0]) |
+		  CHROMA_STRIDE(fb->pitches[1]));
+
+	/* Set up video layer data format */
+	fmt = zx_vl_get_fmt(format);
+	if (fmt >= 0)
+		zx_writel(layer + VL_CTRL1, fmt);
+
+	/* Always use scaler since it exists (set for not bypass) */
+	zx_writel_mask(layer + VL_CTRL2, VL_SCALER_BYPASS_MODE,
+		       VL_SCALER_BYPASS_MODE);
+
+	zx_vl_rsz_setup(zplane, format, src_w, src_h, dst_w, dst_h);
+
+	/* Enable HBSC block */
+	zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+
+	zx_vou_layer_enable(plane);
+
+	zx_vl_set_update(zplane);
+}
+
+static void zx_plane_atomic_disable(struct drm_plane *plane,
+				    struct drm_plane_state *old_state)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+	void __iomem *hbsc = zplane->hbsc;
+
+	zx_vou_layer_disable(plane);
+
+	/* Disable HBSC block */
+	zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
+}
+
+static const struct drm_plane_helper_funcs zx_vl_plane_helper_funcs = {
+	.atomic_check = zx_vl_plane_atomic_check,
+	.atomic_update = zx_vl_plane_atomic_update,
+	.atomic_disable = zx_plane_atomic_disable,
+};
+
 static int zx_gl_plane_atomic_check(struct drm_plane *plane,
 				    struct drm_plane_state *plane_state)
 {
@@ -107,14 +352,6 @@ static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
 	zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
 }
 
-void zx_plane_set_update(struct drm_plane *plane)
-{
-	struct zx_plane *zplane = to_zx_plane(plane);
-
-	zx_gl_rsz_set_update(zplane);
-	zx_gl_set_update(zplane);
-}
-
 static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
 			    u32 dst_w, u32 dst_h)
 {
@@ -146,7 +383,7 @@ static void zx_gl_plane_atomic_update(struct drm_plane *plane,
 	if (!fb)
 		return;
 
-	format = fb->pixel_format;
+	format = fb->format->format;
 	stride = fb->pitches[0];
 
 	src_x = plane->state->src_x >> 16;
@@ -159,7 +396,7 @@ static void zx_gl_plane_atomic_update(struct drm_plane *plane,
 	dst_w = plane->state->crtc_w;
 	dst_h = plane->state->crtc_h;
 
-	bpp = drm_format_plane_cpp(format, 0);
+	bpp = fb->format->cpp[0];
 
 	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	paddr = cma_obj->paddr + fb->offsets[0];
@@ -207,12 +444,15 @@ static void zx_gl_plane_atomic_update(struct drm_plane *plane,
 	/* Enable HBSC block */
 	zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
 
+	zx_vou_layer_enable(plane);
+
 	zx_gl_set_update(zplane);
 }
 
 static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
 	.atomic_check = zx_gl_plane_atomic_check,
 	.atomic_update = zx_gl_plane_atomic_update,
+	.atomic_disable = zx_plane_atomic_disable,
 };
 
 static void zx_plane_destroy(struct drm_plane *plane)
@@ -230,6 +470,28 @@ static const struct drm_plane_funcs zx_plane_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
 };
 
+void zx_plane_set_update(struct drm_plane *plane)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+
+	/* Do nothing if the plane is not enabled */
+	if (!plane->state->crtc)
+		return;
+
+	switch (plane->type) {
+	case DRM_PLANE_TYPE_PRIMARY:
+		zx_gl_rsz_set_update(zplane);
+		zx_gl_set_update(zplane);
+		break;
+	case DRM_PLANE_TYPE_OVERLAY:
+		zx_vl_rsz_set_update(zplane);
+		zx_vl_set_update(zplane);
+		break;
+	default:
+		WARN_ONCE(1, "unsupported plane type %d\n", plane->type);
+	}
+}
+
 static void zx_plane_hbsc_init(struct zx_plane *zplane)
 {
 	void __iomem *hbsc = zplane->hbsc;
@@ -248,28 +510,16 @@ static void zx_plane_hbsc_init(struct zx_plane *zplane)
 	zx_writel(hbsc + HBSC_THRESHOLD_COL3, (0x3c0 << 16) | 0x40);
 }
 
-struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
-				struct zx_layer_data *data,
-				enum drm_plane_type type)
+int zx_plane_init(struct drm_device *drm, struct zx_plane *zplane,
+		  enum drm_plane_type type)
 {
 	const struct drm_plane_helper_funcs *helper;
-	struct zx_plane *zplane;
-	struct drm_plane *plane;
+	struct drm_plane *plane = &zplane->plane;
+	struct device *dev = zplane->dev;
 	const uint32_t *formats;
 	unsigned int format_count;
 	int ret;
 
-	zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
-	if (!zplane)
-		return ERR_PTR(-ENOMEM);
-
-	plane = &zplane->plane;
-
-	zplane->layer = data->layer;
-	zplane->hbsc = data->hbsc;
-	zplane->csc = data->csc;
-	zplane->rsz = data->rsz;
-
 	zx_plane_hbsc_init(zplane);
 
 	switch (type) {
@@ -279,10 +529,12 @@ struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
 		format_count = ARRAY_SIZE(gl_formats);
 		break;
 	case DRM_PLANE_TYPE_OVERLAY:
-		/* TODO: add video layer (vl) support */
+		helper = &zx_vl_plane_helper_funcs;
+		formats = vl_formats;
+		format_count = ARRAY_SIZE(vl_formats);
 		break;
 	default:
-		return ERR_PTR(-ENODEV);
+		return -ENODEV;
 	}
 
 	ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
@@ -290,10 +542,10 @@ struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
 				       type, NULL);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "failed to init universal plane: %d\n", ret);
-		return ERR_PTR(ret);
+		return ret;
 	}
 
 	drm_plane_helper_add(plane, helper);
 
-	return plane;
+	return 0;
 }