diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 140 |
1 files changed, 69 insertions, 71 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 97499d00615a..a56f6adf3b76 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -129,7 +129,7 @@ config SENSORS_ADM1025 config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 @@ -140,7 +140,7 @@ config SENSORS_ADM1026 config SENSORS_ADM1029 tristate "Analog Devices ADM1029" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Analog Devices ADM1029 sensor chip. @@ -151,7 +151,7 @@ config SENSORS_ADM1029 config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. @@ -202,7 +202,7 @@ config SENSORS_ADT7470 config SENSORS_ADT7475 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Analog Devices @@ -249,32 +249,6 @@ config SENSORS_K10TEMP This driver can also be built as a module. If so, the module will be called k10temp. -config SENSORS_AMS - tristate "Apple Motion Sensor driver" - depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL - select INPUT_POLLDEV - help - Support for the motion sensor included in PowerBooks. Includes - implementations for PMU and I2C. - - This driver can also be built as a module. If so, the module - will be called ams. - -config SENSORS_AMS_PMU - bool "PMU variant" - depends on SENSORS_AMS && ADB_PMU - default y - help - PMU variant of motion sensor, found in late 2005 PowerBooks. - -config SENSORS_AMS_I2C - bool "I2C variant" - depends on SENSORS_AMS && I2C - default y - help - I2C variant of motion sensor, found in early 2005 PowerBooks and - iBooks. - config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C && EXPERIMENTAL @@ -322,7 +296,6 @@ config SENSORS_I5K_AMB config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" - depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG @@ -333,7 +306,6 @@ config SENSORS_F71805F config SENSORS_F71882FG tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" - depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, @@ -343,8 +315,8 @@ config SENSORS_F71882FG will be called f71882fg. config SENSORS_F75375S - tristate "Fintek F75375S/SP and F75373"; - depends on I2C && EXPERIMENTAL + tristate "Fintek F75375S/SP and F75373" + depends on I2C help If you say yes here you get support for hardware monitoring features of the Fintek F75375S/SP and F75373 @@ -399,6 +371,15 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_GPIO_FAN + tristate "GPIO fan" + depends on GENERIC_GPIO + help + If you say yes here you get support for fans connected to GPIO lines. + + This driver can also be built as a module. If so, the module + will be called gpio-fan. + config SENSORS_CORETEMP tristate "Intel Core/Core2/Atom temperature sensor" depends on X86 && PCI && EXPERIMENTAL @@ -447,8 +428,8 @@ config SENSORS_IT87 select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the - SiS960 clone. + IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor + chips, and the SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. @@ -490,7 +471,7 @@ config SENSORS_LM63 config SENSORS_LM70 tristate "National Semiconductor LM70 / Texas Instruments TMP121" - depends on SPI_MASTER && EXPERIMENTAL + depends on SPI_MASTER help If you say yes here you get support for the National Semiconductor LM70 and Texas Instruments TMP121/TMP123 digital temperature @@ -558,7 +539,7 @@ config SENSORS_LM78 config SENSORS_LM80 tristate "National Semiconductor LM80" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for National Semiconductor LM80 sensor chips. @@ -578,11 +559,12 @@ config SENSORS_LM83 config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. + sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, + EMC6D101 and EMC6D102. This driver can also be built as a module. If so, the module will be called lm85. @@ -605,8 +587,8 @@ config SENSORS_LM90 If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG - sensor chips. + MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton + W83L771W/G/AWG/ASG sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -654,6 +636,17 @@ config SENSORS_LTC4245 This driver can also be built as a module. If so, the module will be called ltc4245. +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + config SENSORS_LM95241 tristate "National Semiconductor LM95241 sensor chip" depends on I2C @@ -706,7 +699,6 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" - depends on EXPERIMENTAL help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC87427 Super-I/O chip. @@ -743,14 +735,14 @@ config SENSORS_SHT15 will be called sht15. config SENSORS_S3C - tristate "S3C24XX/S3C64XX Inbuilt ADC" - depends on ARCH_S3C2410 + tristate "Samsung built-in ADC" + depends on S3C_ADC help If you say yes here you get support for the on-board ADCs of - the Samsung S3C24XX or S3C64XX series of SoC + the Samsung S3C24XX, S3C64XX and other series of SoC This driver can also be built as a module. If so, the module - will be called s3c-hwmo. + will be called s3c-hwmon. config SENSORS_S3C_RAW bool "Include raw channel attributes in sysfs" @@ -834,7 +826,7 @@ config SENSORS_SMSC47M1 config SENSORS_SMSC47M192 tristate "SMSC LPC47M192 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the temperature and @@ -890,7 +882,7 @@ config SENSORS_AMC6821 config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Texas Instruments THMC50 sensor chips and clones: the Analog Devices ADM1022. @@ -948,7 +940,6 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" - depends on EXPERIMENTAL select HWMON_VID help If you say yes here then you get support for hardware monitoring @@ -992,7 +983,7 @@ config SENSORS_W83791D config SENSORS_W83792D tristate "Winbond W83792D" - depends on I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the Winbond W83792D chip. @@ -1011,6 +1002,33 @@ config SENSORS_W83793 This driver can also be built as a module. If so, the module will be called w83793. +config SENSORS_W83795 + tristate "Winbond/Nuvoton W83795G/ADG" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Winbond W83795G and + W83795ADG hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called w83795. + +config SENSORS_W83795_FANCTRL + boolean "Include fan control support (DANGEROUS)" + depends on SENSORS_W83795 && EXPERIMENTAL + default n + help + If you say yes here, support for the both manual and automatic + fan control features will be included in the driver. + + This part of the code wasn't carefully reviewed and tested yet, + so enabling this option is strongly discouraged on production + servers. Only developers and testers should enable it for the + time being. + + Please also note that this option will create sysfs attribute + files which may change in the future, so you shouldn't rely + on them being stable. + config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" depends on I2C && EXPERIMENTAL @@ -1088,26 +1106,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_HDAPS - tristate "IBM Hard Drive Active Protection System (hdaps)" - depends on INPUT && X86 - select INPUT_POLLDEV - default n - help - This driver provides support for the IBM Hard Drive Active Protection - System (hdaps), which provides an accelerometer and other misc. data. - ThinkPads starting with the R50, T41, and X40 are supported. The - accelerometer data is readable via sysfs. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - If your ThinkPad is not recognized by the driver, please update to latest - BIOS. This is especially the case for some R52 ThinkPads. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of hdaps. - config SENSORS_LIS3_SPI tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" depends on !ACPI && SPI_MASTER && INPUT |