diff options
Diffstat (limited to 'drivers/hwmon/occ')
| -rw-r--r-- | drivers/hwmon/occ/Kconfig | 31 | ||||
| -rw-r--r-- | drivers/hwmon/occ/Makefile | 5 | ||||
| -rw-r--r-- | drivers/hwmon/occ/common.c | 1098 | ||||
| -rw-r--r-- | drivers/hwmon/occ/common.h | 128 | ||||
| -rw-r--r-- | drivers/hwmon/occ/p8_i2c.c | 255 | ||||
| -rw-r--r-- | drivers/hwmon/occ/p9_sbe.c | 106 | ||||
| -rw-r--r-- | drivers/hwmon/occ/sysfs.c | 188 |
7 files changed, 1811 insertions, 0 deletions
diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig new file mode 100644 index 000000000000..66686628fb53 --- /dev/null +++ b/drivers/hwmon/occ/Kconfig @@ -0,0 +1,31 @@ +# +# On-Chip Controller configuration +# + +config SENSORS_OCC_P8_I2C + tristate "POWER8 OCC through I2C" + depends on I2C + select SENSORS_OCC + help + This option enables support for monitoring sensors provided by the + On-Chip Controller (OCC) on a POWER8 processor. Communications with + the OCC are established through I2C bus. + + This driver can also be built as a module. If so, the module will be + called occ-p8-hwmon. + +config SENSORS_OCC_P9_SBE + tristate "POWER9 OCC through SBE" + depends on FSI_OCC + select SENSORS_OCC + help + This option enables support for monitoring sensors provided by the + On-Chip Controller (OCC) on a POWER9 processor. Communications with + the OCC are established through SBE fifo on an FSI bus. + + This driver can also be built as a module. If so, the module will be + called occ-p9-hwmon. + +config SENSORS_OCC + bool "POWER On-Chip Controller" + depends on SENSORS_OCC_P8_I2C || SENSORS_OCC_P9_SBE diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile new file mode 100644 index 000000000000..3fec12ddc7e7 --- /dev/null +++ b/drivers/hwmon/occ/Makefile @@ -0,0 +1,5 @@ +occ-p8-hwmon-objs := common.o sysfs.o p8_i2c.o +occ-p9-hwmon-objs := common.o sysfs.o p9_sbe.o + +obj-$(CONFIG_SENSORS_OCC_P8_I2C) += occ-p8-hwmon.o +obj-$(CONFIG_SENSORS_OCC_P9_SBE) += occ-p9-hwmon.o diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c new file mode 100644 index 000000000000..423903f87955 --- /dev/null +++ b/drivers/hwmon/occ/common.c @@ -0,0 +1,1098 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> +#include <asm/unaligned.h> + +#include "common.h" + +#define EXTN_FLAG_SENSOR_ID BIT(7) + +#define OCC_ERROR_COUNT_THRESHOLD 2 /* required by OCC spec */ + +#define OCC_STATE_SAFE 4 +#define OCC_SAFE_TIMEOUT msecs_to_jiffies(60000) /* 1 min */ + +#define OCC_UPDATE_FREQUENCY msecs_to_jiffies(1000) + +#define OCC_TEMP_SENSOR_FAULT 0xFF + +#define OCC_FRU_TYPE_VRM 3 + +/* OCC sensor type and version definitions */ + +struct temp_sensor_1 { + u16 sensor_id; + u16 value; +} __packed; + +struct temp_sensor_2 { + u32 sensor_id; + u8 fru_type; + u8 value; +} __packed; + +struct freq_sensor_1 { + u16 sensor_id; + u16 value; +} __packed; + +struct freq_sensor_2 { + u32 sensor_id; + u16 value; +} __packed; + +struct power_sensor_1 { + u16 sensor_id; + u32 update_tag; + u32 accumulator; + u16 value; +} __packed; + +struct power_sensor_2 { + u32 sensor_id; + u8 function_id; + u8 apss_channel; + u16 reserved; + u32 update_tag; + u64 accumulator; + u16 value; +} __packed; + +struct power_sensor_data { + u16 value; + u32 update_tag; + u64 accumulator; +} __packed; + +struct power_sensor_data_and_time { + u16 update_time; + u16 value; + u32 update_tag; + u64 accumulator; +} __packed; + +struct power_sensor_a0 { + u32 sensor_id; + struct power_sensor_data_and_time system; + u32 reserved; + struct power_sensor_data_and_time proc; + struct power_sensor_data vdd; + struct power_sensor_data vdn; +} __packed; + +struct caps_sensor_2 { + u16 cap; + u16 system_power; + u16 n_cap; + u16 max; + u16 min; + u16 user; + u8 user_source; +} __packed; + +struct caps_sensor_3 { + u16 cap; + u16 system_power; + u16 n_cap; + u16 max; + u16 hard_min; + u16 soft_min; + u16 user; + u8 user_source; +} __packed; + +struct extended_sensor { + union { + u8 name[4]; + u32 sensor_id; + }; + u8 flags; + u8 reserved; + u8 data[6]; +} __packed; + +static int occ_poll(struct occ *occ) +{ + int rc; + u16 checksum = occ->poll_cmd_data + 1; + u8 cmd[8]; + struct occ_poll_response_header *header; + + /* big endian */ + cmd[0] = 0; /* sequence number */ + cmd[1] = 0; /* cmd type */ + cmd[2] = 0; /* data length msb */ + cmd[3] = 1; /* data length lsb */ + cmd[4] = occ->poll_cmd_data; /* data */ + cmd[5] = checksum >> 8; /* checksum msb */ + cmd[6] = checksum & 0xFF; /* checksum lsb */ + cmd[7] = 0; + + /* mutex should already be locked if necessary */ + rc = occ->send_cmd(occ, cmd); + if (rc) { + if (occ->error_count++ > OCC_ERROR_COUNT_THRESHOLD) + occ->error = rc; + + goto done; + } + + /* clear error since communication was successful */ + occ->error_count = 0; + occ->error = 0; + + /* check for safe state */ + header = (struct occ_poll_response_header *)occ->resp.data; + if (header->occ_state == OCC_STATE_SAFE) { + if (occ->last_safe) { + if (time_after(jiffies, + occ->last_safe + OCC_SAFE_TIMEOUT)) + occ->error = -EHOSTDOWN; + } else { + occ->last_safe = jiffies; + } + } else { + occ->last_safe = 0; + } + +done: + occ_sysfs_poll_done(occ); + return rc; +} + +static int occ_set_user_power_cap(struct occ *occ, u16 user_power_cap) +{ + int rc; + u8 cmd[8]; + u16 checksum = 0x24; + __be16 user_power_cap_be = cpu_to_be16(user_power_cap); + + cmd[0] = 0; + cmd[1] = 0x22; + cmd[2] = 0; + cmd[3] = 2; + + memcpy(&cmd[4], &user_power_cap_be, 2); + + checksum += cmd[4] + cmd[5]; + cmd[6] = checksum >> 8; + cmd[7] = checksum & 0xFF; + + rc = mutex_lock_interruptible(&occ->lock); + if (rc) + return rc; + + rc = occ->send_cmd(occ, cmd); + + mutex_unlock(&occ->lock); + + return rc; +} + +int occ_update_response(struct occ *occ) +{ + int rc = mutex_lock_interruptible(&occ->lock); + + if (rc) + return rc; + + /* limit the maximum rate of polling the OCC */ + if (time_after(jiffies, occ->last_update + OCC_UPDATE_FREQUENCY)) { + rc = occ_poll(occ); + occ->last_update = jiffies; + } + + mutex_unlock(&occ->lock); + return rc; +} + +static ssize_t occ_show_temp_1(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u32 val = 0; + struct temp_sensor_1 *temp; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + temp = ((struct temp_sensor_1 *)sensors->temp.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be16(&temp->sensor_id); + break; + case 1: + val = get_unaligned_be16(&temp->value) * 1000; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); +} + +static ssize_t occ_show_temp_2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u32 val = 0; + struct temp_sensor_2 *temp; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + temp = ((struct temp_sensor_2 *)sensors->temp.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be32(&temp->sensor_id); + break; + case 1: + val = temp->value; + if (val == OCC_TEMP_SENSOR_FAULT) + return -EREMOTEIO; + + /* + * VRM doesn't return temperature, only alarm bit. This + * attribute maps to tempX_alarm instead of tempX_input for + * VRM + */ + if (temp->fru_type != OCC_FRU_TYPE_VRM) { + /* sensor not ready */ + if (val == 0) + return -EAGAIN; + + val *= 1000; + } + break; + case 2: + val = temp->fru_type; + break; + case 3: + val = temp->value == OCC_TEMP_SENSOR_FAULT; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); +} + +static ssize_t occ_show_freq_1(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u16 val = 0; + struct freq_sensor_1 *freq; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + freq = ((struct freq_sensor_1 *)sensors->freq.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be16(&freq->sensor_id); + break; + case 1: + val = get_unaligned_be16(&freq->value); + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); +} + +static ssize_t occ_show_freq_2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u32 val = 0; + struct freq_sensor_2 *freq; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + freq = ((struct freq_sensor_2 *)sensors->freq.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be32(&freq->sensor_id); + break; + case 1: + val = get_unaligned_be16(&freq->value); + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); +} + +static ssize_t occ_show_power_1(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u64 val = 0; + struct power_sensor_1 *power; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + power = ((struct power_sensor_1 *)sensors->power.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be16(&power->sensor_id); + break; + case 1: + val = get_unaligned_be32(&power->accumulator) / + get_unaligned_be32(&power->update_tag); + val *= 1000000ULL; + break; + case 2: + val = get_unaligned_be32(&power->update_tag) * + occ->powr_sample_time_us; + break; + case 3: + val = get_unaligned_be16(&power->value) * 1000000ULL; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val); +} + +static u64 occ_get_powr_avg(u64 *accum, u32 *samples) +{ + return div64_u64(get_unaligned_be64(accum) * 1000000ULL, + get_unaligned_be32(samples)); +} + +static ssize_t occ_show_power_2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u64 val = 0; + struct power_sensor_2 *power; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + power = ((struct power_sensor_2 *)sensors->power.data) + sattr->index; + + switch (sattr->nr) { + case 0: + return snprintf(buf, PAGE_SIZE - 1, "%u_%u_%u\n", + get_unaligned_be32(&power->sensor_id), + power->function_id, power->apss_channel); + case 1: + val = occ_get_powr_avg(&power->accumulator, + &power->update_tag); + break; + case 2: + val = get_unaligned_be32(&power->update_tag) * + occ->powr_sample_time_us; + break; + case 3: + val = get_unaligned_be16(&power->value) * 1000000ULL; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val); +} + +static ssize_t occ_show_power_a0(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u64 val = 0; + struct power_sensor_a0 *power; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + power = ((struct power_sensor_a0 *)sensors->power.data) + sattr->index; + + switch (sattr->nr) { + case 0: + return snprintf(buf, PAGE_SIZE - 1, "%u_system\n", + get_unaligned_be32(&power->sensor_id)); + case 1: + val = occ_get_powr_avg(&power->system.accumulator, + &power->system.update_tag); + break; + case 2: + val = get_unaligned_be32(&power->system.update_tag) * + occ->powr_sample_time_us; + break; + case 3: + val = get_unaligned_be16(&power->system.value) * 1000000ULL; + break; + case 4: + return snprintf(buf, PAGE_SIZE - 1, "%u_proc\n", + get_unaligned_be32(&power->sensor_id)); + case 5: + val = occ_get_powr_avg(&power->proc.accumulator, + &power->proc.update_tag); + break; + case 6: + val = get_unaligned_be32(&power->proc.update_tag) * + occ->powr_sample_time_us; + break; + case 7: + val = get_unaligned_be16(&power->proc.value) * 1000000ULL; + break; + case 8: + return snprintf(buf, PAGE_SIZE - 1, "%u_vdd\n", + get_unaligned_be32(&power->sensor_id)); + case 9: + val = occ_get_powr_avg(&power->vdd.accumulator, + &power->vdd.update_tag); + break; + case 10: + val = get_unaligned_be32(&power->vdd.update_tag) * + occ->powr_sample_time_us; + break; + case 11: + val = get_unaligned_be16(&power->vdd.value) * 1000000ULL; + break; + case 12: + return snprintf(buf, PAGE_SIZE - 1, "%u_vdn\n", + get_unaligned_be32(&power->sensor_id)); + case 13: + val = occ_get_powr_avg(&power->vdn.accumulator, + &power->vdn.update_tag); + break; + case 14: + val = get_unaligned_be32(&power->vdn.update_tag) * + occ->powr_sample_time_us; + break; + case 15: + val = get_unaligned_be16(&power->vdn.value) * 1000000ULL; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val); +} + +static ssize_t occ_show_caps_1_2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u64 val = 0; + struct caps_sensor_2 *caps; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + caps = ((struct caps_sensor_2 *)sensors->caps.data) + sattr->index; + + switch (sattr->nr) { + case 0: + return snprintf(buf, PAGE_SIZE - 1, "system\n"); + case 1: + val = get_unaligned_be16(&caps->cap) * 1000000ULL; + break; + case 2: + val = get_unaligned_be16(&caps->system_power) * 1000000ULL; + break; + case 3: + val = get_unaligned_be16(&caps->n_cap) * 1000000ULL; + break; + case 4: + val = get_unaligned_be16(&caps->max) * 1000000ULL; + break; + case 5: + val = get_unaligned_be16(&caps->min) * 1000000ULL; + break; + case 6: + val = get_unaligned_be16(&caps->user) * 1000000ULL; + break; + case 7: + if (occ->sensors.caps.version == 1) + return -EINVAL; + + val = caps->user_source; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val); +} + +static ssize_t occ_show_caps_3(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u64 val = 0; + struct caps_sensor_3 *caps; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + caps = ((struct caps_sensor_3 *)sensors->caps.data) + sattr->index; + + switch (sattr->nr) { + case 0: + return snprintf(buf, PAGE_SIZE - 1, "system\n"); + case 1: + val = get_unaligned_be16(&caps->cap) * 1000000ULL; + break; + case 2: + val = get_unaligned_be16(&caps->system_power) * 1000000ULL; + break; + case 3: + val = get_unaligned_be16(&caps->n_cap) * 1000000ULL; + break; + case 4: + val = get_unaligned_be16(&caps->max) * 1000000ULL; + break; + case 5: + val = get_unaligned_be16(&caps->hard_min) * 1000000ULL; + break; + case 6: + val = get_unaligned_be16(&caps->user) * 1000000ULL; + break; + case 7: + val = caps->user_source; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val); +} + +static ssize_t occ_store_caps_user(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int rc; + u16 user_power_cap; + unsigned long long value; + struct occ *occ = dev_get_drvdata(dev); + + rc = kstrtoull(buf, 0, &value); + if (rc) + return rc; + + user_power_cap = div64_u64(value, 1000000ULL); /* microwatt to watt */ + + rc = occ_set_user_power_cap(occ, user_power_cap); + if (rc) + return rc; + + return count; +} + +static ssize_t occ_show_extended(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + struct extended_sensor *extn; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + extn = ((struct extended_sensor *)sensors->extended.data) + + sattr->index; + + switch (sattr->nr) { + case 0: + if (extn->flags & EXTN_FLAG_SENSOR_ID) + rc = snprintf(buf, PAGE_SIZE - 1, "%u", + get_unaligned_be32(&extn->sensor_id)); + else + rc = snprintf(buf, PAGE_SIZE - 1, "%02x%02x%02x%02x\n", + extn->name[0], extn->name[1], + extn->name[2], extn->name[3]); + break; + case 1: + rc = snprintf(buf, PAGE_SIZE - 1, "%02x\n", extn->flags); + break; + case 2: + rc = snprintf(buf, PAGE_SIZE - 1, "%02x%02x%02x%02x%02x%02x\n", + extn->data[0], extn->data[1], extn->data[2], + extn->data[3], extn->data[4], extn->data[5]); + break; + default: + return -EINVAL; + } + + return rc; +} + +/* + * Some helper macros to make it easier to define an occ_attribute. Since these + * are dynamically allocated, we shouldn't use the existing kernel macros which + * stringify the name argument. + */ +#define ATTR_OCC(_name, _mode, _show, _store) { \ + .attr = { \ + .name = _name, \ + .mode = VERIFY_OCTAL_PERMISSIONS(_mode), \ + }, \ + .show = _show, \ + .store = _store, \ +} + +#define SENSOR_ATTR_OCC(_name, _mode, _show, _store, _nr, _index) { \ + .dev_attr = ATTR_OCC(_name, _mode, _show, _store), \ + .index = _index, \ + .nr = _nr, \ +} + +#define OCC_INIT_ATTR(_name, _mode, _show, _store, _nr, _index) \ + ((struct sensor_device_attribute_2) \ + SENSOR_ATTR_OCC(_name, _mode, _show, _store, _nr, _index)) + +/* + * Allocate and instatiate sensor_device_attribute_2s. It's most efficient to + * use our own instead of the built-in hwmon attribute types. + */ +static int occ_setup_sensor_attrs(struct occ *occ) +{ + unsigned int i, s, num_attrs = 0; + struct device *dev = occ->bus_dev; + struct occ_sensors *sensors = &occ->sensors; + struct occ_attribute *attr; + struct temp_sensor_2 *temp; + ssize_t (*show_temp)(struct device *, struct device_attribute *, + char *) = occ_show_temp_1; + ssize_t (*show_freq)(struct device *, struct device_attribute *, + char *) = occ_show_freq_1; + ssize_t (*show_power)(struct device *, struct device_attribute *, + char *) = occ_show_power_1; + ssize_t (*show_caps)(struct device *, struct device_attribute *, + char *) = occ_show_caps_1_2; + + switch (sensors->temp.version) { + case 1: + num_attrs += (sensors->temp.num_sensors * 2); + break; + case 2: + num_attrs += (sensors->temp.num_sensors * 4); + show_temp = occ_show_temp_2; + break; + default: + sensors->temp.num_sensors = 0; + } + + switch (sensors->freq.version) { + case 2: + show_freq = occ_show_freq_2; + /* fall through */ + case 1: + num_attrs += (sensors->freq.num_sensors * 2); + break; + default: + sensors->freq.num_sensors = 0; + } + + switch (sensors->power.version) { + case 2: + show_power = occ_show_power_2; + /* fall through */ + case 1: + num_attrs += (sensors->power.num_sensors * 4); + break; + case 0xA0: + num_attrs += (sensors->power.num_sensors * 16); + show_power = occ_show_power_a0; + break; + default: + sensors->power.num_sensors = 0; + } + + switch (sensors->caps.version) { + case 1: + num_attrs += (sensors->caps.num_sensors * 7); + break; + case 3: + show_caps = occ_show_caps_3; + /* fall through */ + case 2: + num_attrs += (sensors->caps.num_sensors * 8); + break; + default: + sensors->caps.num_sensors = 0; + } + + switch (sensors->extended.version) { + case 1: + num_attrs += (sensors->extended.num_sensors * 3); + break; + default: + sensors->extended.num_sensors = 0; + } + + occ->attrs = devm_kzalloc(dev, sizeof(*occ->attrs) * num_attrs, + GFP_KERNEL); + if (!occ->attrs) + return -ENOMEM; + + /* null-terminated list */ + occ->group.attrs = devm_kzalloc(dev, sizeof(*occ->group.attrs) * + num_attrs + 1, GFP_KERNEL); + if (!occ->group.attrs) + return -ENOMEM; + + attr = occ->attrs; + + for (i = 0; i < sensors->temp.num_sensors; ++i) { + s = i + 1; + temp = ((struct temp_sensor_2 *)sensors->temp.data) + i; + + snprintf(attr->name, sizeof(attr->name), "temp%d_label", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_temp, NULL, + 0, i); + attr++; + + if (sensors->temp.version > 1 && + temp->fru_type == OCC_FRU_TYPE_VRM) { + snprintf(attr->name, sizeof(attr->name), + "temp%d_alarm", s); + } else { + snprintf(attr->name, sizeof(attr->name), + "temp%d_input", s); + } + + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_temp, NULL, + 1, i); + attr++; + + if (sensors->temp.version > 1) { + snprintf(attr->name, sizeof(attr->name), + "temp%d_fru_type", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_temp, NULL, 2, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "temp%d_fault", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_temp, NULL, 3, i); + attr++; + } + } + + for (i = 0; i < sensors->freq.num_sensors; ++i) { + s = i + 1; + + snprintf(attr->name, sizeof(attr->name), "freq%d_label", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_freq, NULL, + 0, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), "freq%d_input", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_freq, NULL, + 1, i); + attr++; + } + + if (sensors->power.version == 0xA0) { + /* + * Special case for many-attribute power sensor. Split it into + * a sensor number per power type, emulating several sensors. + */ + for (i = 0; i < sensors->power.num_sensors; ++i) { + unsigned int j; + unsigned int nr = 0; + + s = (i * 4) + 1; + + for (j = 0; j < 4; ++j) { + snprintf(attr->name, sizeof(attr->name), + "power%d_label", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, + nr++, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_average", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, + nr++, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_average_interval", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, + nr++, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_input", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, + nr++, i); + attr++; + + s++; + } + } + } else { + for (i = 0; i < sensors->power.num_sensors; ++i) { + s = i + 1; + + snprintf(attr->name, sizeof(attr->name), + "power%d_label", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, 0, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_average", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, 1, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_average_interval", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, 2, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_input", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_power, NULL, 3, i); + attr++; + } + } + + if (sensors->caps.num_sensors >= 1) { + s = sensors->power.num_sensors + 1; + + snprintf(attr->name, sizeof(attr->name), "power%d_label", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL, + 0, 0); + attr++; + + snprintf(attr->name, sizeof(attr->name), "power%d_cap", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL, + 1, 0); + attr++; + + snprintf(attr->name, sizeof(attr->name), "power%d_input", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL, + 2, 0); + attr++; + + snprintf(attr->name, sizeof(attr->name), + "power%d_cap_not_redundant", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL, + 3, 0); + attr++; + + snprintf(attr->name, sizeof(attr->name), "power%d_cap_max", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL, + 4, 0); + attr++; + + snprintf(attr->name, sizeof(attr->name), "power%d_cap_min", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL, + 5, 0); + attr++; + + snprintf(attr->name, sizeof(attr->name), "power%d_cap_user", + s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0644, show_caps, + occ_store_caps_user, 6, 0); + attr++; + + if (sensors->caps.version > 1) { + snprintf(attr->name, sizeof(attr->name), + "power%d_cap_user_source", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_caps, NULL, 7, 0); + attr++; + } + } + + for (i = 0; i < sensors->extended.num_sensors; ++i) { + s = i + 1; + + snprintf(attr->name, sizeof(attr->name), "extn%d_label", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + occ_show_extended, NULL, 0, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), "extn%d_flags", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + occ_show_extended, NULL, 1, i); + attr++; + + snprintf(attr->name, sizeof(attr->name), "extn%d_input", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + occ_show_extended, NULL, 2, i); + attr++; + } + + /* put the sensors in the group */ + for (i = 0; i < num_attrs; ++i) { + sysfs_attr_init(&occ->attrs[i].sensor.dev_attr.attr); + occ->group.attrs[i] = &occ->attrs[i].sensor.dev_attr.attr; + } + + return 0; +} + +/* only need to do this once at startup, as OCC won't change sensors on us */ +static void occ_parse_poll_response(struct occ *occ) +{ + unsigned int i, old_offset, offset = 0, size = 0; + struct occ_sensor *sensor; + struct occ_sensors *sensors = &occ->sensors; + struct occ_response *resp = &occ->resp; + struct occ_poll_response *poll = + (struct occ_poll_response *)&resp->data[0]; + struct occ_poll_response_header *header = &poll->header; + struct occ_sensor_data_block *block = &poll->block; + + dev_info(occ->bus_dev, "OCC found, code level: %.16s\n", + header->occ_code_level); + + for (i = 0; i < header->num_sensor_data_blocks; ++i) { + block = (struct occ_sensor_data_block *)((u8 *)block + offset); + old_offset = offset; + offset = (block->header.num_sensors * + block->header.sensor_length) + sizeof(block->header); + size += offset; + + /* validate all the length/size fields */ + if ((size + sizeof(*header)) >= OCC_RESP_DATA_BYTES) { + dev_warn(occ->bus_dev, "exceeded response buffer\n"); + return; + } + + dev_dbg(occ->bus_dev, " %04x..%04x: %.4s (%d sensors)\n", + old_offset, offset - 1, block->header.eye_catcher, + block->header.num_sensors); + + /* match sensor block type */ + if (strncmp(block->header.eye_catcher, "TEMP", 4) == 0) + sensor = &sensors->temp; + else if (strncmp(block->header.eye_catcher, "FREQ", 4) == 0) + sensor = &sensors->freq; + else if (strncmp(block->header.eye_catcher, "POWR", 4) == 0) + sensor = &sensors->power; + else if (strncmp(block->header.eye_catcher, "CAPS", 4) == 0) + sensor = &sensors->caps; + else if (strncmp(block->header.eye_catcher, "EXTN", 4) == 0) + sensor = &sensors->extended; + else { + dev_warn(occ->bus_dev, "sensor not supported %.4s\n", + block->header.eye_catcher); + continue; + } + + sensor->num_sensors = block->header.num_sensors; + sensor->version = block->header.sensor_format; + sensor->data = &block->data; + } + + dev_dbg(occ->bus_dev, "Max resp size: %u+%zd=%zd\n", size, + sizeof(*header), size + sizeof(*header)); +} + +int occ_setup(struct occ *occ, const char *name) +{ + int rc; + + mutex_init(&occ->lock); + occ->groups[0] = &occ->group; + + /* no need to lock */ + rc = occ_poll(occ); + if (rc == -ESHUTDOWN) { + dev_info(occ->bus_dev, "host is not ready\n"); + return rc; + } else if (rc < 0) { + dev_err(occ->bus_dev, "failed to get OCC poll response: %d\n", + rc); + return rc; + } + + occ_parse_poll_response(occ); + + rc = occ_setup_sensor_attrs(occ); + if (rc) { + dev_err(occ->bus_dev, "failed to setup sensor attrs: %d\n", + rc); + return rc; + } + + occ->hwmon = devm_hwmon_device_register_with_groups(occ->bus_dev, name, + occ, occ->groups); + if (IS_ERR(occ->hwmon)) { + rc = PTR_ERR(occ->hwmon); + dev_err(occ->bus_dev, "failed to register hwmon device: %d\n", + rc); + return rc; + } + + rc = occ_setup_sysfs(occ); + if (rc) + dev_err(occ->bus_dev, "failed to setup sysfs: %d\n", rc); + + return rc; +} diff --git a/drivers/hwmon/occ/common.h b/drivers/hwmon/occ/common.h new file mode 100644 index 000000000000..7c44df3f5631 --- /dev/null +++ b/drivers/hwmon/occ/common.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef OCC_COMMON_H +#define OCC_COMMON_H + +#include <linux/hwmon-sysfs.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> + +struct device; + +#define OCC_RESP_DATA_BYTES 4089 + +/* + * Same response format for all OCC versions. + * Allocate the largest possible response. + */ +struct occ_response { + u8 seq_no; + u8 cmd_type; + u8 return_status; + __be16 data_length; + u8 data[OCC_RESP_DATA_BYTES]; + __be16 checksum; +} __packed; + +struct occ_sensor_data_block_header { + u8 eye_catcher[4]; + u8 reserved; + u8 sensor_format; + u8 sensor_length; + u8 num_sensors; +} __packed; + +struct occ_sensor_data_block { + struct occ_sensor_data_block_header header; + u32 data; +} __packed; + +struct occ_poll_response_header { + u8 status; + u8 ext_status; + u8 occs_present; + u8 config_data; + u8 occ_state; + u8 mode; + u8 ips_status; + u8 error_log_id; + __be32 error_log_start_address; + __be16 error_log_length; + u16 reserved; + u8 occ_code_level[16]; + u8 eye_catcher[6]; + u8 num_sensor_data_blocks; + u8 sensor_data_block_header_version; +} __packed; + +struct occ_poll_response { + struct occ_poll_response_header header; + struct occ_sensor_data_block block; +} __packed; + +struct occ_sensor { + u8 num_sensors; + u8 version; + void *data; /* pointer to sensor data start within response */ +}; + +/* + * OCC only provides one sensor data block of each type, but any number of + * sensors within that block. + */ +struct occ_sensors { + struct occ_sensor temp; + struct occ_sensor freq; + struct occ_sensor power; + struct occ_sensor caps; + struct occ_sensor extended; +}; + +/* + * Use our own attribute struct so we can dynamically allocate space for the + * name. + */ +struct occ_attribute { + char name[32]; + struct sensor_device_attribute_2 sensor; +}; + +struct occ { + struct device *bus_dev; + + struct occ_response resp; + struct occ_sensors sensors; + + int powr_sample_time_us; /* average power sample time */ + u8 poll_cmd_data; /* to perform OCC poll command */ + int (*send_cmd)(struct occ *occ, u8 *cmd); + + unsigned long last_update; + struct mutex lock; /* lock OCC access */ + + struct device *hwmon; + struct occ_attribute *attrs; + struct attribute_group group; + const struct attribute_group *groups[2]; + + int error; /* latest transfer error */ + unsigned int error_count; /* number of xfr errors observed */ + unsigned long last_safe; /* time OCC entered "safe" state */ + + /* + * Store the previous state data for comparison in order to notify + * sysfs readers of state changes. + */ + int prev_error; + u8 prev_stat; + u8 prev_ext_stat; + u8 prev_occs_present; +}; + +int occ_setup(struct occ *occ, const char *name); +int occ_setup_sysfs(struct occ *occ); +void occ_shutdown(struct occ *occ); +void occ_sysfs_poll_done(struct occ *occ); +int occ_update_response(struct occ *occ); + +#endif /* OCC_COMMON_H */ diff --git a/drivers/hwmon/occ/p8_i2c.c b/drivers/hwmon/occ/p8_i2c.c new file mode 100644 index 000000000000..b59efc945e54 --- /dev/null +++ b/drivers/hwmon/occ/p8_i2c.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/fsi-occ.h> +#include <linux/i2c.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <asm/unaligned.h> + +#include "common.h" + +#define OCC_TIMEOUT_MS 1000 +#define OCC_CMD_IN_PRG_WAIT_MS 50 + +/* OCB (on-chip control bridge - interface to OCC) registers */ +#define OCB_DATA1 0x6B035 +#define OCB_ADDR 0x6B070 +#define OCB_DATA3 0x6B075 + +/* OCC SRAM address space */ +#define OCC_SRAM_ADDR_CMD 0xFFFF6000 +#define OCC_SRAM_ADDR_RESP 0xFFFF7000 + +#define OCC_DATA_ATTN 0x20010000 + +struct p8_i2c_occ { + struct occ occ; + struct i2c_client *client; +}; + +#define to_p8_i2c_occ(x) container_of((x), struct p8_i2c_occ, occ) + +static int p8_i2c_occ_getscom(struct i2c_client *client, u32 address, u8 *data) +{ + ssize_t rc; + __be64 buf; + struct i2c_msg msgs[2]; + + /* p8 i2c slave requires shift */ + address <<= 1; + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags & I2C_M_TEN; + msgs[0].len = sizeof(u32); + /* address is a scom address; bus-endian */ + msgs[0].buf = (char *)&address; + + /* data from OCC is big-endian */ + msgs[1].addr = client->addr; + msgs[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; + msgs[1].len = sizeof(u64); + msgs[1].buf = (char *)&buf; + + rc = i2c_transfer(client->adapter, msgs, 2); + if (rc < 0) + return rc; + + *(u64 *)data = be64_to_cpu(buf); + + return 0; +} + +static int p8_i2c_occ_putscom(struct i2c_client *client, u32 address, u8 *data) +{ + u32 buf[3]; + ssize_t rc; + + /* p8 i2c slave requires shift */ + address <<= 1; + + /* address is bus-endian; data passed through from user as-is */ + buf[0] = address; + memcpy(&buf[1], &data[4], sizeof(u32)); + memcpy(&buf[2], data, sizeof(u32)); + + rc = i2c_master_send(client, (const char *)buf, sizeof(buf)); + if (rc < 0) + return rc; + else if (rc != sizeof(buf)) + return -EIO; + + return 0; +} + +static int p8_i2c_occ_putscom_u32(struct i2c_client *client, u32 address, + u32 data0, u32 data1) +{ + u8 buf[8]; + + memcpy(buf, &data0, 4); + memcpy(buf + 4, &data1, 4); + + return p8_i2c_occ_putscom(client, address, buf); +} + +static int p8_i2c_occ_putscom_be(struct i2c_client *client, u32 address, + u8 *data) +{ + __be32 data0, data1; + + memcpy(&data0, data, 4); + memcpy(&data1, data + 4, 4); + + return p8_i2c_occ_putscom_u32(client, address, be32_to_cpu(data0), + be32_to_cpu(data1)); +} + +static int p8_i2c_occ_send_cmd(struct occ *occ, u8 *cmd) +{ + int i, rc; + unsigned long start; + u16 data_length; + const unsigned long timeout = msecs_to_jiffies(OCC_TIMEOUT_MS); + const long wait_time = msecs_to_jiffies(OCC_CMD_IN_PRG_WAIT_MS); + struct p8_i2c_occ *ctx = to_p8_i2c_occ(occ); + struct i2c_client *client = ctx->client; + struct occ_response *resp = &occ->resp; + + start = jiffies; + + /* set sram address for command */ + rc = p8_i2c_occ_putscom_u32(client, OCB_ADDR, OCC_SRAM_ADDR_CMD, 0); + if (rc) + return rc; + + /* write command (expected to already be BE), we need bus-endian... */ + rc = p8_i2c_occ_putscom_be(client, OCB_DATA3, cmd); + if (rc) + return rc; + + /* trigger OCC attention */ + rc = p8_i2c_occ_putscom_u32(client, OCB_DATA1, OCC_DATA_ATTN, 0); + if (rc) + return rc; + + do { + /* set sram address for response */ + rc = p8_i2c_occ_putscom_u32(client, OCB_ADDR, + OCC_SRAM_ADDR_RESP, 0); + if (rc) + return rc; + + rc = p8_i2c_occ_getscom(client, OCB_DATA3, (u8 *)resp); + if (rc) + return rc; + + /* wait for OCC */ + if (resp->return_status == OCC_RESP_CMD_IN_PRG) { + rc = -EALREADY; + + if (time_after(jiffies, start + timeout)) + break; + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(wait_time); + } + } while (rc); + + /* check the OCC response */ + switch (resp->return_status) { + case OCC_RESP_CMD_IN_PRG: + rc = -ETIMEDOUT; + break; + case OCC_RESP_SUCCESS: + rc = 0; + break; + case OCC_RESP_CMD_INVAL: + case OCC_RESP_CMD_LEN_INVAL: + case OCC_RESP_DATA_INVAL: + case OCC_RESP_CHKSUM_ERR: + rc = -EINVAL; + break; + case OCC_RESP_INT_ERR: + case OCC_RESP_BAD_STATE: + case OCC_RESP_CRIT_EXCEPT: + case OCC_RESP_CRIT_INIT: + case OCC_RESP_CRIT_WATCHDOG: + case OCC_RESP_CRIT_OCB: + case OCC_RESP_CRIT_HW: + rc = -EREMOTEIO; + break; + default: + rc = -EPROTO; + } + + if (rc < 0) + return rc; + + data_length = get_unaligned_be16(&resp->data_length); + if (data_length > OCC_RESP_DATA_BYTES) + return -EMSGSIZE; + + /* fetch the rest of the response data */ + for (i = 8; i < data_length + 7; i += 8) { + rc = p8_i2c_occ_getscom(client, OCB_DATA3, ((u8 *)resp) + i); + if (rc) + return rc; + } + + return 0; +} + +static int p8_i2c_occ_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct occ *occ; + struct p8_i2c_occ *ctx = devm_kzalloc(&client->dev, sizeof(*ctx), + GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->client = client; + occ = &ctx->occ; + occ->bus_dev = &client->dev; + dev_set_drvdata(&client->dev, occ); + + occ->powr_sample_time_us = 250; + occ->poll_cmd_data = 0x10; /* P8 OCC poll data */ + occ->send_cmd = p8_i2c_occ_send_cmd; + + return occ_setup(occ, "p8_occ"); +} + +static int p8_i2c_occ_remove(struct i2c_client *client) +{ + struct occ *occ = dev_get_drvdata(&client->dev); + + occ_shutdown(occ); + + return 0; +} + +static const struct of_device_id p8_i2c_occ_of_match[] = { + { .compatible = "ibm,p8-occ-hwmon" }, + {} +}; +MODULE_DEVICE_TABLE(of, p8_i2c_occ_of_match); + +static struct i2c_driver p8_i2c_occ_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "occ-hwmon", + .of_match_table = p8_i2c_occ_of_match, + }, + .probe = p8_i2c_occ_probe, + .remove = p8_i2c_occ_remove, +}; + +module_i2c_driver(p8_i2c_occ_driver); + +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); +MODULE_DESCRIPTION("BMC P8 OCC hwmon driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/occ/p9_sbe.c b/drivers/hwmon/occ/p9_sbe.c new file mode 100644 index 000000000000..b65c1d1dfb54 --- /dev/null +++ b/drivers/hwmon/occ/p9_sbe.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/fsi-occ.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "common.h" + +struct p9_sbe_occ { + struct occ occ; + struct device *sbe; +}; + +#define to_p9_sbe_occ(x) container_of((x), struct p9_sbe_occ, occ) + +static int p9_sbe_occ_send_cmd(struct occ *occ, u8 *cmd) +{ + struct occ_response *resp = &occ->resp; + struct p9_sbe_occ *ctx = to_p9_sbe_occ(occ); + size_t resp_len = sizeof(*resp); + int rc; + + rc = fsi_occ_submit(ctx->sbe, cmd, 8, resp, &resp_len); + if (rc < 0) + return rc; + + switch (resp->return_status) { + case OCC_RESP_CMD_IN_PRG: + rc = -ETIMEDOUT; + break; + case OCC_RESP_SUCCESS: + rc = 0; + break; + case OCC_RESP_CMD_INVAL: + case OCC_RESP_CMD_LEN_INVAL: + case OCC_RESP_DATA_INVAL: + case OCC_RESP_CHKSUM_ERR: + rc = -EINVAL; + break; + case OCC_RESP_INT_ERR: + case OCC_RESP_BAD_STATE: + case OCC_RESP_CRIT_EXCEPT: + case OCC_RESP_CRIT_INIT: + case OCC_RESP_CRIT_WATCHDOG: + case OCC_RESP_CRIT_OCB: + case OCC_RESP_CRIT_HW: + rc = -EREMOTEIO; + break; + default: + rc = -EPROTO; + } + + return rc; +} + +static int p9_sbe_occ_probe(struct platform_device *pdev) +{ + int rc; + struct occ *occ; + struct p9_sbe_occ *ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), + GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->sbe = pdev->dev.parent; + occ = &ctx->occ; + occ->bus_dev = &pdev->dev; + platform_set_drvdata(pdev, occ); + + occ->powr_sample_time_us = 500; + occ->poll_cmd_data = 0x20; /* P9 OCC poll data */ + occ->send_cmd = p9_sbe_occ_send_cmd; + + rc = occ_setup(occ, "p9_occ"); + if (rc == -ESHUTDOWN) + rc = -ENODEV; /* Host is shutdown, don't spew errors */ + + return rc; +} + +static int p9_sbe_occ_remove(struct platform_device *pdev) +{ + struct occ *occ = platform_get_drvdata(pdev); + struct p9_sbe_occ *ctx = to_p9_sbe_occ(occ); + + ctx->sbe = NULL; + occ_shutdown(occ); + + return 0; +} + +static struct platform_driver p9_sbe_occ_driver = { + .driver = { + .name = "occ-hwmon", + }, + .probe = p9_sbe_occ_probe, + .remove = p9_sbe_occ_remove, +}; + +module_platform_driver(p9_sbe_occ_driver); + +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); +MODULE_DESCRIPTION("BMC P9 OCC hwmon driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/occ/sysfs.c b/drivers/hwmon/occ/sysfs.c new file mode 100644 index 000000000000..743b26ec8e54 --- /dev/null +++ b/drivers/hwmon/occ/sysfs.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OCC hwmon driver sysfs interface + * + * Copyright (C) IBM Corporation 2018 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/hwmon-sysfs.h> +#include <linux/kernel.h> +#include <linux/sysfs.h> + +#include "common.h" + +/* OCC status register */ +#define OCC_STAT_MASTER BIT(7) +#define OCC_STAT_ACTIVE BIT(0) + +/* OCC extended status register */ +#define OCC_EXT_STAT_DVFS_OT BIT(7) +#define OCC_EXT_STAT_DVFS_POWER BIT(6) +#define OCC_EXT_STAT_MEM_THROTTLE BIT(5) +#define OCC_EXT_STAT_QUICK_DROP BIT(4) + +static ssize_t occ_sysfs_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + int val = 0; + struct occ *occ = dev_get_drvdata(dev); + struct occ_poll_response_header *header; + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + header = (struct occ_poll_response_header *)occ->resp.data; + + switch (sattr->index) { + case 0: + val = !!(header->status & OCC_STAT_MASTER); + break; + case 1: + val = !!(header->status & OCC_STAT_ACTIVE); + break; + case 2: + val = !!(header->status & OCC_EXT_STAT_DVFS_OT); + break; + case 3: + val = !!(header->status & OCC_EXT_STAT_DVFS_POWER); + break; + case 4: + val = !!(header->status & OCC_EXT_STAT_MEM_THROTTLE); + break; + case 5: + val = !!(header->status & OCC_EXT_STAT_QUICK_DROP); + break; + case 6: + val = header->occ_state; + break; + case 7: + if (header->status & OCC_STAT_MASTER) + val = hweight8(header->occs_present); + else + val = 1; + break; + case 8: + val = occ->error; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%d\n", val); +} + +static SENSOR_DEVICE_ATTR(occ_master, 0444, occ_sysfs_show, NULL, 0); +static SENSOR_DEVICE_ATTR(occ_active, 0444, occ_sysfs_show, NULL, 1); +static SENSOR_DEVICE_ATTR(occ_dvfs_overtemp, 0444, occ_sysfs_show, NULL, 2); +static SENSOR_DEVICE_ATTR(occ_dvfs_power, 0444, occ_sysfs_show, NULL, 3); +static SENSOR_DEVICE_ATTR(occ_mem_throttle, 0444, occ_sysfs_show, NULL, 4); +static SENSOR_DEVICE_ATTR(occ_quick_pwr_drop, 0444, occ_sysfs_show, NULL, 5); +static SENSOR_DEVICE_ATTR(occ_state, 0444, occ_sysfs_show, NULL, 6); +static SENSOR_DEVICE_ATTR(occs_present, 0444, occ_sysfs_show, NULL, 7); +static SENSOR_DEVICE_ATTR(occ_error, 0444, occ_sysfs_show, NULL, 8); + +static struct attribute *occ_attributes[] = { + &sensor_dev_attr_occ_master.dev_attr.attr, + &sensor_dev_attr_occ_active.dev_attr.attr, + &sensor_dev_attr_occ_dvfs_overtemp.dev_attr.attr, + &sensor_dev_attr_occ_dvfs_power.dev_attr.attr, + &sensor_dev_attr_occ_mem_throttle.dev_attr.attr, + &sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr, + &sensor_dev_attr_occ_state.dev_attr.attr, + &sensor_dev_attr_occs_present.dev_attr.attr, + &sensor_dev_attr_occ_error.dev_attr.attr, + NULL +}; + +static const struct attribute_group occ_sysfs = { + .attrs = occ_attributes, +}; + +void occ_sysfs_poll_done(struct occ *occ) +{ + const char *name; + struct occ_poll_response_header *header = + (struct occ_poll_response_header *)occ->resp.data; + + /* + * On the first poll response, we haven't yet created the sysfs + * attributes, so don't make any notify calls. + */ + if (!occ->hwmon) + goto done; + + if ((header->status & OCC_STAT_MASTER) != + (occ->prev_stat & OCC_STAT_MASTER)) { + name = sensor_dev_attr_occ_master.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if ((header->status & OCC_STAT_ACTIVE) != + (occ->prev_stat & OCC_STAT_ACTIVE)) { + name = sensor_dev_attr_occ_active.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if ((header->ext_status & OCC_EXT_STAT_DVFS_OT) != + (occ->prev_ext_stat & OCC_EXT_STAT_DVFS_OT)) { + name = sensor_dev_attr_occ_dvfs_overtemp.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if ((header->ext_status & OCC_EXT_STAT_DVFS_POWER) != + (occ->prev_ext_stat & OCC_EXT_STAT_DVFS_POWER)) { + name = sensor_dev_attr_occ_dvfs_power.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if ((header->ext_status & OCC_EXT_STAT_MEM_THROTTLE) != + (occ->prev_ext_stat & OCC_EXT_STAT_MEM_THROTTLE)) { + name = sensor_dev_attr_occ_mem_throttle.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if ((header->ext_status & OCC_EXT_STAT_QUICK_DROP) != + (occ->prev_ext_stat & OCC_EXT_STAT_QUICK_DROP)) { + name = sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if ((header->status & OCC_STAT_MASTER) && + header->occs_present != occ->prev_occs_present) { + name = sensor_dev_attr_occs_present.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + if (occ->error && occ->error != occ->prev_error) { + name = sensor_dev_attr_occ_error.dev_attr.attr.name; + sysfs_notify(&occ->bus_dev->kobj, NULL, name); + } + + /* no notifications for OCC state; doesn't indicate error condition */ + +done: + occ->prev_error = occ->error; + occ->prev_stat = header->status; + occ->prev_ext_stat = header->ext_status; + occ->prev_occs_present = header->occs_present; +} + +int occ_setup_sysfs(struct occ *occ) +{ + return sysfs_create_group(&occ->bus_dev->kobj, &occ_sysfs); +} + +void occ_shutdown(struct occ *occ) +{ + sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs); +} |