aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig37
-rw-r--r--drivers/hwmon/Makefile3
-rw-r--r--drivers/hwmon/adm1177.c288
-rw-r--r--drivers/hwmon/drivetemp.c574
-rw-r--r--drivers/hwmon/hwmon.c17
-rw-r--r--drivers/hwmon/i5k_amb.c2
-rw-r--r--drivers/hwmon/k10temp.c489
-rw-r--r--drivers/hwmon/max31730.c440
-rw-r--r--drivers/hwmon/pmbus/Kconfig32
-rw-r--r--drivers/hwmon/pmbus/Makefile2
-rw-r--r--drivers/hwmon/pmbus/ibm-cffps.c89
-rw-r--r--drivers/hwmon/pmbus/max20730.c372
-rw-r--r--drivers/hwmon/pmbus/max20751.c2
-rw-r--r--drivers/hwmon/pmbus/pmbus.c6
-rw-r--r--drivers/hwmon/pmbus/pmbus.h15
-rw-r--r--drivers/hwmon/pmbus/pmbus_core.c22
-rw-r--r--drivers/hwmon/pmbus/pxe1610.c44
-rw-r--r--drivers/hwmon/pmbus/tps53679.c46
-rw-r--r--drivers/hwmon/pmbus/ucd9000.c39
-rw-r--r--drivers/hwmon/pmbus/xdpe12284.c117
-rw-r--r--drivers/hwmon/pwm-fan.c15
-rw-r--r--drivers/hwmon/w83627ehf.c1969
22 files changed, 3129 insertions, 1491 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 23dfe848979a..47ac20aee06f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -164,6 +164,16 @@ config SENSORS_ADM1031
This driver can also be built as a module. If so, the module
will be called adm1031.
+config SENSORS_ADM1177
+ tristate "Analog Devices ADM1177 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for Analog Devices ADM1177
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1177.
+
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
depends on I2C
@@ -385,6 +395,16 @@ config SENSORS_ATXP1
This driver can also be built as a module. If so, the module
will be called atxp1.
+config SENSORS_DRIVETEMP
+ tristate "Hard disk drives with temperature sensors"
+ depends on SCSI && ATA
+ help
+ If you say yes you get support for the temperature sensor on
+ hard disk drives.
+
+ This driver can also be built as a module. If so, the module
+ will be called satatemp.
+
config SENSORS_DS620
tristate "Dallas Semiconductor DS620"
depends on I2C
@@ -889,7 +909,7 @@ config SENSORS_MAX197
will be called max197.
config SENSORS_MAX31722
-tristate "MAX31722 temperature sensor"
+ tristate "MAX31722 temperature sensor"
depends on SPI
help
Support for the Maxim Integrated MAX31722/MAX31723 digital
@@ -898,6 +918,16 @@ tristate "MAX31722 temperature sensor"
This driver can also be built as a module. If so, the module
will be called max31722.
+config SENSORS_MAX31730
+ tristate "MAX31730 temperature sensor"
+ depends on I2C
+ help
+ Support for the Maxim Integrated MAX31730 3-Channel Remote
+ Temperature Sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called max31730.
+
config SENSORS_MAX6621
tristate "Maxim MAX6621 sensor chip"
depends on I2C
@@ -1905,7 +1935,7 @@ config SENSORS_W83627HF
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
+ tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
depends on !PPC
select HWMON_VID
help
@@ -1918,8 +1948,7 @@ config SENSORS_W83627EHF
the Core 2 Duo. And also the W83627UHG, which is a stripped down
version of the W83627DHG (as far as hardware monitoring goes.)
- This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
- (also known as W83667HG-I), and NCT6776F.
+ This driver also supports Nuvoton W83667HG and W83667HG-B.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6db5db9cdc29..613f50987965 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
+obj-$(CONFIG_SENSORS_ADM1177) += adm1177.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
obj-$(CONFIG_SENSORS_ADS7871) += ads7871.o
@@ -56,6 +57,7 @@ obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
+obj-$(CONFIG_SENSORS_DRIVETEMP) += drivetemp.o
obj-$(CONFIG_SENSORS_DS620) += ds620.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
@@ -123,6 +125,7 @@ obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
obj-$(CONFIG_SENSORS_MAX197) += max197.o
obj-$(CONFIG_SENSORS_MAX31722) += max31722.o
+obj-$(CONFIG_SENSORS_MAX31730) += max31730.o
obj-$(CONFIG_SENSORS_MAX6621) += max6621.o
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
diff --git a/drivers/hwmon/adm1177.c b/drivers/hwmon/adm1177.c
new file mode 100644
index 000000000000..d314223a404a
--- /dev/null
+++ b/drivers/hwmon/adm1177.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin
+ *
+ * Copyright 2015-2019 Analog Devices Inc.
+ */
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+
+/* Command Byte Operations */
+#define ADM1177_CMD_V_CONT BIT(0)
+#define ADM1177_CMD_I_CONT BIT(2)
+#define ADM1177_CMD_VRANGE BIT(4)
+
+/* Extended Register */
+#define ADM1177_REG_ALERT_TH 2
+
+#define ADM1177_BITS 12
+
+/**
+ * struct adm1177_state - driver instance specific data
+ * @client pointer to i2c client
+ * @reg regulator info for the the power supply of the device
+ * @r_sense_uohm current sense resistor value
+ * @alert_threshold_ua current limit for shutdown
+ * @vrange_high internal voltage divider
+ */
+struct adm1177_state {
+ struct i2c_client *client;
+ struct regulator *reg;
+ u32 r_sense_uohm;
+ u32 alert_threshold_ua;
+ bool vrange_high;
+};
+
+static int adm1177_read_raw(struct adm1177_state *st, u8 num, u8 *data)
+{
+ return i2c_master_recv(st->client, data, num);
+}
+
+static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd)
+{
+ return i2c_smbus_write_byte(st->client, cmd);
+}
+
+static int adm1177_write_alert_thr(struct adm1177_state *st,
+ u32 alert_threshold_ua)
+{
+ u64 val;
+ int ret;
+
+ val = 0xFFULL * alert_threshold_ua * st->r_sense_uohm;
+ val = div_u64(val, 105840000U);
+ val = div_u64(val, 1000U);
+ if (val > 0xFF)
+ val = 0xFF;
+
+ ret = i2c_smbus_write_byte_data(st->client, ADM1177_REG_ALERT_TH,
+ val);
+ if (ret)
+ return ret;
+
+ st->alert_threshold_ua = alert_threshold_ua;
+ return 0;
+}
+
+static int adm1177_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct adm1177_state *st = dev_get_drvdata(dev);
+ u8 data[3];
+ long dummy;
+ int ret;
+
+ switch (type) {
+ case hwmon_curr:
+ switch (attr) {
+ case hwmon_curr_input:
+ ret = adm1177_read_raw(st, 3, data);
+ if (ret < 0)
+ return ret;
+ dummy = (data[1] << 4) | (data[2] & 0xF);
+ /*
+ * convert to milliamperes
+ * ((105.84mV / 4096) x raw) / senseResistor(ohm)
+ */
+ *val = div_u64((105840000ull * dummy),
+ 4096 * st->r_sense_uohm);
+ return 0;
+ case hwmon_curr_max_alarm:
+ *val = st->alert_threshold_ua;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+ case hwmon_in:
+ ret = adm1177_read_raw(st, 3, data);
+ if (ret < 0)
+ return ret;
+ dummy = (data[0] << 4) | (data[2] >> 4);
+ /*
+ * convert to millivolts based on resistor devision
+ * (V_fullscale / 4096) * raw
+ */
+ if (st->vrange_high)
+ dummy *= 26350;
+ else
+ dummy *= 6650;
+
+ *val = DIV_ROUND_CLOSEST(dummy, 4096);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int adm1177_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct adm1177_state *st = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_curr:
+ switch (attr) {
+ case hwmon_curr_max_alarm:
+ adm1177_write_alert_thr(st, val);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t adm1177_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct adm1177_state *st = data;
+
+ switch (type) {
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_input:
+ return 0444;
+ }
+ break;
+ case hwmon_curr:
+ switch (attr) {
+ case hwmon_curr_input:
+ if (st->r_sense_uohm)
+ return 0444;
+ return 0;
+ case hwmon_curr_max_alarm:
+ if (st->r_sense_uohm)
+ return 0644;
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static const struct hwmon_channel_info *adm1177_info[] = {
+ HWMON_CHANNEL_INFO(curr,
+ HWMON_C_INPUT | HWMON_C_MAX_ALARM),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops adm1177_hwmon_ops = {
+ .is_visible = adm1177_is_visible,
+ .read = adm1177_read,
+ .write = adm1177_write,
+};
+
+static const struct hwmon_chip_info adm1177_chip_info = {
+ .ops = &adm1177_hwmon_ops,
+ .info = adm1177_info,
+};
+
+static void adm1177_remove(void *data)
+{
+ struct adm1177_state *st = data;
+
+ regulator_disable(st->reg);
+}
+
+static int adm1177_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct adm1177_state *st;
+ u32 alert_threshold_ua;
+ int ret;
+
+ st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ st->client = client;
+
+ st->reg = devm_regulator_get_optional(&client->dev, "vref");
+ if (IS_ERR(st->reg)) {
+ if (PTR_ERR(st->reg) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ st->reg = NULL;
+ } else {
+ ret = regulator_enable(st->reg);
+ if (ret)
+ return ret;
+ ret = devm_add_action_or_reset(&client->dev, adm1177_remove,
+ st);
+ if (ret)
+ return ret;
+ }
+
+ if (device_property_read_u32(dev, "shunt-resistor-micro-ohms",
+ &st->r_sense_uohm))
+ st->r_sense_uohm = 0;
+ if (device_property_read_u32(dev, "adi,shutdown-threshold-microamp",
+ &alert_threshold_ua)) {
+ if (st->r_sense_uohm)
+ /*
+ * set maximum default value from datasheet based on
+ * shunt-resistor
+ */
+ alert_threshold_ua = div_u64(105840000000,
+ st->r_sense_uohm);
+ else
+ alert_threshold_ua = 0;
+ }
+ st->vrange_high = device_property_read_bool(dev,
+ "adi,vrange-high-enable");
+ if (alert_threshold_ua && st->r_sense_uohm)
+ adm1177_write_alert_thr(st, alert_threshold_ua);
+
+ ret = adm1177_write_cmd(st, ADM1177_CMD_V_CONT |
+ ADM1177_CMD_I_CONT |
+ (st->vrange_high ? 0 : ADM1177_CMD_VRANGE));
+ if (ret)
+ return ret;
+
+ hwmon_dev =
+ devm_hwmon_device_register_with_info(dev, client->name, st,
+ &adm1177_chip_info, NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id adm1177_id[] = {
+ {"adm1177", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, adm1177_id);
+
+static const struct of_device_id adm1177_dt_ids[] = {
+ { .compatible = "adi,adm1177" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, adm1177_dt_ids);
+
+static struct i2c_driver adm1177_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "adm1177",
+ .of_match_table = adm1177_dt_ids,
+ },
+ .probe = adm1177_probe,
+ .id_table = adm1177_id,
+};
+module_i2c_driver(adm1177_driver);
+
+MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c
new file mode 100644
index 000000000000..370d0c74eb01
--- /dev/null
+++ b/drivers/hwmon/drivetemp.c
@@ -0,0 +1,574 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hwmon client for disk and solid state drives with temperature sensors
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ *
+ * With input from:
+ * Hwmon client for S.M.A.R.T. hard disk drives with temperature sensors.
+ * (C) 2018 Linus Walleij
+ *
+ * hwmon: Driver for SCSI/ATA temperature sensors
+ * by Constantin Baranov <const@mimas.ru>, submitted September 2009
+ *
+ * This drive supports reporting the temperatire of SATA drives. It can be
+ * easily extended to report the temperature of SCSI drives.
+ *
+ * The primary means to read drive temperatures and temperature limits
+ * for ATA drives is the SCT Command Transport feature set as specified in
+ * ATA8-ACS.
+ * It can be used to read the current drive temperature, temperature limits,
+ * and historic minimum and maximum temperatures. The SCT Command Transport
+ * feature set is documented in "AT Attachment 8 - ATA/ATAPI Command Set
+ * (ATA8-ACS)".
+ *
+ * If the SCT Command Transport feature set is not available, drive temperatures
+ * may be readable through SMART attributes. Since SMART attributes are not well
+ * defined, this method is only used as fallback mechanism.
+ *
+ * There are three SMART attributes which may report drive temperatures.
+ * Those are defined as follows (from
+ * http://www.cropel.com/library/smart-attribute-list.aspx).
+ *
+ * 190 Temperature Temperature, monitored by a sensor somewhere inside
+ * the drive. Raw value typicaly holds the actual
+ * temperature (hexadecimal) in its rightmost two digits.
+ *
+ * 194 Temperature Temperature, monitored by a sensor somewhere inside
+ * the drive. Raw value typicaly holds the actual
+ * temperature (hexadecimal) in its rightmost two digits.
+ *
+ * 231 Temperature Temperature, monitored by a sensor somewhere inside
+ * the drive. Raw value typicaly holds the actual
+ * temperature (hexadecimal) in its rightmost two digits.
+ *
+ * Wikipedia defines attributes a bit differently.
+ *
+ * 190 Temperature Value is equal to (100-temp. °C), allowing manufacturer
+ * Difference or to set a minimum threshold which corresponds to a
+ * Airflow maximum temperature. This also follows the convention of
+ * Temperature 100 being a best-case value and lower values being
+ * undesirable. However, some older drives may instead
+ * report raw Temperature (identical to 0xC2) or
+ * Temperature minus 50 here.
+ * 194 Temperature or Indicates the device temperature, if the appropriate
+ * Temperature sensor is fitted. Lowest byte of the raw value contains
+ * Celsius the exact temperature value (Celsius degrees).
+ * 231 Life Left Indicates the approximate SSD life left, in terms of
+ * (SSDs) or program/erase cycles or available reserved blocks.
+ * Temperature A normalized value of 100 represents a new drive, with
+ * a threshold value at 10 indicating a need for
+ * replacement. A value of 0 may mean that the drive is
+ * operating in read-only mode to allow data recovery.
+ * Previously (pre-2010) occasionally used for Drive
+ * Temperature (more typically reported at 0xC2).
+ *
+ * Common denominator is that the first raw byte reports the temperature
+ * in degrees C on almost all drives. Some drives may report a fractional
+ * temperature in the second raw byte.
+ *
+ * Known exceptions (from libatasmart):
+ * - SAMSUNG SV0412H and SAMSUNG SV1204H) report the temperature in 10th
+ * degrees C in the first two raw bytes.
+ * - A few Maxtor drives report an unknown or bad value in attribute 194.
+ * - Certain Apple SSD drives report an unknown value in attribute 190.
+ * Only certain firmware versions are affected.
+ *
+ * Those exceptions affect older ATA drives and are currently ignored.
+ * Also, the second raw byte (possibly reporting the fractional temperature)
+ * is currently ignored.
+ *
+ * Many drives also report temperature limits in additional SMART data raw
+ * bytes. The format of those is not well defined and varies widely.
+ * The driver does not currently attempt to report those limits.
+ *
+ * According to data in smartmontools, attribute 231 is rarely used to report
+ * drive temperatures. At the same time, several drives report SSD life left
+ * in attribute 231, but do not support temperature sensors. For this reason,
+ * attribute 231 is currently ignored.
+ *
+ * Following above definitions, temperatures are reported as follows.
+ * If SCT Command Transport is supported, it is used to read the
+ * temperature and, if available, temperature limits.
+ * - Otherwise, if SMART attribute 194 is supported, it is used to read
+ * the temperature.
+ * - Otherwise, if SMART attribute 190 is supported, it is used to read
+ * the temperature.
+ */
+
+#include <linux/ata.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_proto.h>
+
+struct drivetemp_data {
+ struct list_head list; /* list of instantiated devices */
+ struct mutex lock; /* protect data buffer accesses */
+ struct scsi_device *sdev; /* SCSI device */
+ struct device *dev; /* instantiating device */
+ struct device *hwdev; /* hardware monitoring device */
+ u8 smartdata[ATA_SECT_SIZE]; /* local buffer */
+ int (*get_temp)(struct drivetemp_data *st, u32 attr, long *val);
+ bool have_temp_lowest; /* lowest temp in SCT status */
+ bool have_temp_highest; /* highest temp in SCT status */
+ bool have_temp_min; /* have min temp */
+ bool have_temp_max; /* have max temp */
+ bool have_temp_lcrit; /* have lower critical limit */
+ bool have_temp_crit; /* have critical limit */
+ int temp_min; /* min temp */
+ int temp_max; /* max temp */
+ int temp_lcrit; /* lower critical limit */
+ int temp_crit; /* critical limit */
+};
+
+static LIST_HEAD(drivetemp_devlist);
+
+#define ATA_MAX_SMART_ATTRS 30
+#define SMART_TEMP_PROP_190 190
+#define SMART_TEMP_PROP_194 194
+
+#define SCT_STATUS_REQ_ADDR 0xe0
+#define SCT_STATUS_VERSION_LOW 0 /* log byte offsets */
+#define SCT_STATUS_VERSION_HIGH 1
+#define SCT_STATUS_TEMP 200
+#define SCT_STATUS_TEMP_LOWEST 201
+#define SCT_STATUS_TEMP_HIGHEST 202
+#define SCT_READ_LOG_ADDR 0xe1
+#define SMART_READ_LOG 0xd5
+#define SMART_WRITE_LOG 0xd6
+
+#define INVALID_TEMP 0x80
+
+#define temp_is_valid(temp) ((temp) != INVALID_TEMP)
+#define temp_from_sct(temp) (((s8)(temp)) * 1000)
+
+static inline bool ata_id_smart_supported(u16 *id)
+{
+ return id[ATA_ID_COMMAND_SET_1] & BIT(0);
+}
+
+static inline bool ata_id_smart_enabled(u16 *id)
+{
+ return id[ATA_ID_CFS_ENABLE_1] & BIT(0);
+}
+
+static int drivetemp_scsi_command(struct drivetemp_data *st,
+ u8 ata_command, u8 feature,
+ u8 lba_low, u8 lba_mid, u8 lba_high)
+{
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ int data_dir;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ if (ata_command == ATA_CMD_SMART && feature == SMART_WRITE_LOG) {
+ scsi_cmd[1] = (5 << 1); /* PIO Data-out */
+ /*
+ * No off.line or cc, write to dev, block count in sector count
+ * field.
+ */
+ scsi_cmd[2] = 0x06;
+ data_dir = DMA_TO_DEVICE;
+ } else {
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ /*
+ * No off.line or cc, read from dev, block count in sector count
+ * field.
+ */
+ scsi_cmd[2] = 0x0e;
+ data_dir = DMA_FROM_DEVICE;
+ }
+ scsi_cmd[4] = feature;
+ scsi_cmd[6] = 1; /* 1 sector */
+ scsi_cmd[8] = lba_low;
+ scsi_cmd[10] = lba_mid;
+ scsi_cmd[12] = lba_high;
+ scsi_cmd[14] = ata_command;
+
+ return scsi_execute_req(st->sdev, scsi_cmd, data_dir,
+ st->smartdata, ATA_SECT_SIZE, NULL, HZ, 5,
+ NULL);
+}
+
+static int drivetemp_ata_command(struct drivetemp_data *st, u8 feature,
+ u8 select)
+{
+ return drivetemp_scsi_command(st, ATA_CMD_SMART, feature, select,
+ ATA_SMART_LBAM_PASS, ATA_SMART_LBAH_PASS);
+}
+
+static int drivetemp_get_smarttemp(struct drivetemp_data *st, u32 attr,
+ long *temp)
+{
+ u8 *buf = st->smartdata;
+ bool have_temp = false;
+ u8 temp_raw;
+ u8 csum;
+ int err;
+ int i;
+
+ err = drivetemp_ata_command(st, ATA_SMART_READ_VALUES, 0);
+ if (err)
+ return err;
+
+ /* Checksum the read value table */
+ csum = 0;
+ for (i = 0; i < ATA_SECT_SIZE; i++)
+ csum += buf[i];
+ if (csum) {
+ dev_dbg(&st->sdev->sdev_gendev,
+ "checksum error reading SMART values\n");
+ return -EIO;
+ }
+
+ for (i = 0; i < ATA_MAX_SMART_ATTRS; i++) {
+ u8 *attr = buf + i * 12;
+ int id = attr[2];
+
+ if (!id)
+ continue;
+
+ if (id == SMART_TEMP_PROP_190) {
+ temp_raw = attr[7];
+ have_temp = true;
+ }
+ if (id == SMART_TEMP_PROP_194) {
+ temp_raw = attr[7];
+ have_temp = true;
+ break;
+ }
+ }
+
+ if (have_temp) {
+ *temp = temp_raw * 1000;
+ return 0;
+ }
+
+ return -ENXIO;
+}
+
+static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val)
+{
+ u8 *buf = st->smartdata;
+ int err;
+
+ err = drivetemp_ata_command(st, SMART_READ_LOG, SCT_STATUS_REQ_ADDR);
+ if (err)
+ return err;
+ switch (attr) {
+ case hwmon_temp_input:
+ *val = temp_from_sct(buf[SCT_STATUS_TEMP]);
+ break;
+ case hwmon_temp_lowest:
+ *val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]);
+ break;
+ case hwmon_temp_highest:
+ *val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]);
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+static int drivetemp_identify_sata(struct drivetemp_data *st)
+{
+ struct scsi_device *sdev = st->sdev;
+ u8 *buf = st->smartdata;
+ struct scsi_vpd *vpd;
+ bool is_ata, is_sata;
+ bool have_sct_data_table;
+ bool have_sct_temp;
+ bool have_smart;
+ bool have_sct;
+ u16 *ata_id;
+ u16 version;
+ long temp;
+ int err;
+
+ /* SCSI-ATA Translation present? */
+ rcu_read_lock();
+ vpd = rcu_dereference(sdev->vpd_pg89);
+
+ /*
+ * Verify that ATA IDENTIFY DEVICE data is included in ATA Information
+ * VPD and that the drive implements the SATA protocol.
+ */
+ if (!vpd || vpd->len < 572 || vpd->data[56] != ATA_CMD_ID_ATA ||
+ vpd->data[36] != 0x34) {
+ rcu_read_unlock();
+ return -ENODEV;
+ }
+ ata_id = (u16 *)&vpd->data[60];
+ is_ata = ata_id_is_ata(ata_id);
+ is_sata = ata_id_is_sata(ata_id);
+ have_sct = ata_id_sct_supported(ata_id);
+ have_sct_data_table = ata_id_sct_data_tables(ata_id);
+ have_smart = ata_id_smart_supported(ata_id) &&
+ ata_id_smart_enabled(ata_id);
+
+ rcu_read_unlock();
+
+ /* bail out if this is not a SATA device */
+ if (!is_ata || !is_sata)
+ return -ENODEV;
+ if (!have_sct)
+ goto skip_sct;
+
+ err = drivetemp_ata_command(st, SMART_READ_LOG, SCT_STATUS_REQ_ADDR);
+ if (err)
+ goto skip_sct;
+
+ version = (buf[SCT_STATUS_VERSION_HIGH] << 8) |
+ buf[SCT_STATUS_VERSION_LOW];
+ if (version != 2 && version != 3)
+ goto skip_sct;
+
+ have_sct_temp = temp_is_valid(buf[SCT_STATUS_TEMP]);
+ if (!have_sct_temp)
+ goto skip_sct;
+
+ st->have_temp_lowest = temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST]);
+ st->have_temp_highest = temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST]);
+
+ if (!have_sct_data_table)
+ goto skip_sct;
+
+ /* Request and read temperature history table */
+ memset(buf, '\0', sizeof(st->smartdata));
+ buf[0] = 5; /* data table command */
+ buf[2] = 1; /* read table */
+ buf[4] = 2; /* temperature history table */
+
+ err = drivetemp_ata_command(st, SMART_WRITE_LOG, SCT_STATUS_REQ_ADDR);
+ if (err)
+ goto skip_sct_data;
+
+ err = drivetemp_ata_command(st, SMART_READ_LOG, SCT_READ_LOG_ADDR);
+ if (err)
+ goto skip_sct_data;
+
+ /*
+ * Temperature limits per AT Attachment 8 -
+ * ATA/ATAPI Command Set (ATA8-ACS)
+ */
+ st->have_temp_max = temp_is_valid(buf[6]);
+ st->have_temp_crit = temp_is_valid(buf[7]);
+ st->have_temp_min = temp_is_valid(buf[8]);
+ st->have_temp_lcrit = temp_is_valid(buf[9]);
+
+ st->temp_max = temp_from_sct(buf[6]);
+ st->temp_crit = temp_from_sct(buf[7]);
+ st->temp_min = temp_from_sct(buf[8]);
+ st->temp_lcrit = temp_from_sct(buf[9]);
+
+skip_sct_data:
+ if (have_sct_temp) {
+ st->get_temp = drivetemp_get_scttemp;
+ return 0;
+ }
+skip_sct:
+ if (!have_smart)
+ return -ENODEV;
+ st->get_temp = drivetemp_get_smarttemp;
+ return drivetemp_get_smarttemp(st, hwmon_temp_input, &temp);
+}
+
+static int drivetemp_identify(struct drivetemp_data *st)
+{
+ struct scsi_device *sdev = st->sdev;
+
+ /* Bail out immediately if there is no inquiry data */
+ if (!sdev->inquiry || sdev->inquiry_len < 16)
+ return -ENODEV;
+
+ /* Disk device? */
+ if (sdev->type != TYPE_DISK && sdev->type != TYPE_ZBC)
+ return -ENODEV;
+
+ return drivetemp_identify_sata(st);
+}
+
+static int drivetemp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct drivetemp_data *st = dev_get_drvdata(dev);
+ int err = 0;
+
+ if (type != hwmon_temp)
+ return -EINVAL;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_lowest:
+ case hwmon_temp_highest:
+ mutex_lock(&st->lock);
+ err = st->get_temp(st, attr, val);
+ mutex_unlock(&st->lock);
+ break;
+ case hwmon_temp_lcrit:
+ *val = st->temp_lcrit;
+ break;
+ case hwmon_temp_min:
+ *val = st->temp_min;
+ break;
+ case hwmon_temp_max:
+ *val = st->temp_max;
+ break;
+ case hwmon_temp_crit:
+ *val = st->temp_crit;
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+static umode_t drivetemp_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct drivetemp_data *st = data;
+
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ case hwmon_temp_lowest:
+ if (st->have_temp_lowest)
+ return 0444;
+ break;
+ case hwmon_temp_highest:
+ if (st->have_temp_highest)
+ return 0444;
+ break;
+ case hwmon_temp_min:
+ if (st->have_temp_min)
+ return 0444;
+ break;
+ case hwmon_temp_max:
+ if (st->have_temp_max)
+ return 0444;
+ break;
+ case hwmon_temp_lcrit:
+ if (st->have_temp_lcrit)
+ return 0444;
+ break;
+ case hwmon_temp_crit:
+ if (st->have_temp_crit)
+ return 0444;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static const struct hwmon_channel_info *drivetemp_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT |
+ HWMON_T_LOWEST | HWMON_T_HIGHEST |
+ HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_LCRIT | HWMON_T_CRIT),
+ NULL
+};
+
+static const struct hwmon_ops drivetemp_ops = {
+ .is_visible = drivetemp_is_visible,
+ .read = drivetemp_read,
+};
+
+static const struct hwmon_chip_info drivetemp_chip_info = {
+ .ops = &drivetemp_ops,
+ .info = drivetemp_info,
+};
+
+/*
+ * The device argument points to sdev->sdev_dev. Its parent is
+ * sdev->sdev_gendev, which we can use to get the scsi_device pointer.
+ */
+static int drivetemp_add(struct device *dev, struct class_interface *intf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev->parent);
+ struct drivetemp_data *st;
+ int err;
+
+ st = kzalloc(sizeof(*st), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ st->sdev = sdev;
+ st->dev = dev;
+ mutex_init(&st->lock);
+
+ if (drivetemp_identify(st)) {
+ err = -ENODEV;
+ goto abort;
+ }
+
+ st->hwdev = hwmon_device_register_with_info(dev->parent, "drivetemp",
+ st, &drivetemp_chip_info,
+ NULL);
+ if (IS_ERR(st->hwdev)) {
+ err = PTR_ERR(st->hwdev);
+ goto abort;
+ }
+
+ list_add(&st->list, &drivetemp_devlist);
+ return 0;
+
+abort:
+ kfree(st);
+ return err;
+}
+
+static void drivetemp_remove(struct device *dev, struct class_interface *intf)
+{
+ struct drivetemp_data *st, *tmp;
+
+ list_for_each_entry_safe(st, tmp, &drivetemp_devlist, list) {
+ if (st->dev == dev) {
+ list_del(&st->list);
+ hwmon_device_unregister(st->hwdev);
+ kfree(st);
+ break;
+ }
+ }
+}
+
+static struct class_interface drivetemp_interface = {
+ .add_dev = drivetemp_add,
+ .remove_dev = drivetemp_remove,
+};
+
+static int __init drivetemp_init(void)
+{
+ return scsi_register_interface(&drivetemp_interface);
+}
+
+static void __exit drivetemp_exit(void)
+{
+ scsi_unregister_interface(&drivetemp_interface);
+}
+
+module_init(drivetemp_init);
+module_exit(drivetemp_exit);
+
+MODULE_AUTHOR("Guenter Roeck <linus@roeck-us.net>");
+MODULE_DESCRIPTION("Hard drive temperature monitor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index d018b20089ec..6a30fb453f7a 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -188,7 +188,7 @@ static int hwmon_thermal_add_sensor(struct device *dev, int index)
static int hwmon_attr_base(enum hwmon_sensor_types type)
{
- if (type == hwmon_in)
+ if (type == hwmon_in || type == hwmon_intrusion)
return 0;
return 1;
}
@@ -343,6 +343,7 @@ static const char * const hwmon_chip_attrs[] = {
};
static const char * const hwmon_temp_attr_templates[] = {
+ [hwmon_temp_enable] = "temp%d_enable",
[hwmon_temp_input] = "temp%d_input",
[hwmon_temp_type] = "temp%d_type",
[hwmon_temp_lcrit] = "temp%d_lcrit",
@@ -370,6 +371,7 @@ static const char * const hwmon_temp_attr_templates[] = {
};
static const char * const hwmon_in_attr_templates[] = {
+ [hwmon_in_enable] = "in%d_enable",
[hwmon_in_input] = "in%d_input",
[hwmon_in_min] = "in%d_min",
[hwmon_in_max] = "in%d_max",
@@ -385,10 +387,10 @@ static const char * const hwmon_in_attr_templates[] = {
[hwmon_in_max_alarm] = "in%d_max_alarm",
[hwmon_in_lcrit_alarm] = "in%d_lcrit_alarm",
[hwmon_in_crit_alarm] = "in%d_crit_alarm",
- [hwmon_in_enable] = "in%d_enable",
};
static const char * const hwmon_curr_attr_templates[] = {
+ [hwmon_curr_enable] = "curr%d_enable",
[hwmon_curr_input] = "curr%d_input",
[hwmon_curr_min] = "curr%d_min",
[hwmon_curr_max] = "curr%d_max",
@@ -407,6 +409,7 @@ static const char * const hwmon_curr_attr_templates[] = {
};
static const char * const hwmon_power_attr_templates[] = {
+ [hwmon_power_enable] = "power%d_enable",
[hwmon_power_average] = "power%d_average",
[hwmon_power_average_interval] = "power%d_average_interval",
[hwmon_power_average_interval_max] = "power%d_interval_max",
@@ -438,11 +441,13 @@ static const char * const hwmon_power_attr_templates[] = {
};
static const char * const hwmon_energy_attr_templates[] = {
+ [hwmon_energy_enable] = "energy%d_enable",
[hwmon_energy_input] = "energy%d_input",
[hwmon_energy_label] = "energy%d_label",
};
static const char * const hwmon_humidity_attr_templates[] = {
+ [hwmon_humidity_enable] = "humidity%d_enable",
[hwmon_humidity_input] = "humidity%d_input",
[hwmon_humidity_label] = "humidity%d_label",
[hwmon_humidity_min] = "humidity%d_min",
@@ -454,6 +459,7 @@ static const char * const hwmon_humidity_attr_templates[] = {
};
static const char * const hwmon_fan_attr_templates[] = {
+ [hwmon_fan_enable] = "fan%d_enable",
[hwmon_fan_input] = "fan%d_input",
[hwmon_fan_label] = "fan%d_label",
[hwmon_fan_min] = "fan%d_min",
@@ -474,6 +480,11 @@ static const char * const hwmon_pwm_attr_templates[] = {
[hwmon_pwm_freq] = "pwm%d_freq",
};
+static const char * const hwmon_intrusion_attr_templates[] = {
+ [hwmon_intrusion_alarm] = "intrusion%d_alarm",
+ [hwmon_intrusion_beep] = "intrusion%d_beep",
+};
+
static const char * const *__templates[] = {
[hwmon_chip] = hwmon_chip_attrs,
[hwmon_temp] = hwmon_temp_attr_templates,
@@ -484,6 +495,7 @@ static const char * const *__templates[] = {
[hwmon_humidity] = hwmon_humidity_attr_templates,
[hwmon_fan] = hwmon_fan_attr_templates,
[hwmon_pwm] = hwmon_pwm_attr_templates,
+ [hwmon_intrusion] = hwmon_intrusion_attr_templates,
};
static const int __templates_size[] = {
@@ -496,6 +508,7 @@ static const int __templates_size[] = {
[hwmon_humidity] = ARRAY_SIZE(hwmon_humidity_attr_templates),
[hwmon_fan] = ARRAY_SIZE(hwmon_fan_attr_templates),
[hwmon_pwm] = ARRAY_SIZE(hwmon_pwm_attr_templates),
+ [hwmon_intrusion] = ARRAY_SIZE(hwmon_intrusion_attr_templates),
};
static int hwmon_num_channel_attrs(const struct hwmon_channel_info *info)
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index b09c39abd3a8..eeac4b04df27 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -528,7 +528,7 @@ static int i5k_amb_probe(struct platform_device *pdev)
goto err;
}
- data->amb_mmio = ioremap_nocache(data->amb_base, data->amb_len);
+ data->amb_mmio = ioremap(data->amb_base, data->amb_len);
if (!data->amb_mmio) {
res = -EBUSY;
goto err_map_failed;
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 5c1dddde193c..e39354ffe973 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,13 +1,29 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h/17h
+ * processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ * Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net>
+ *
+ * Implementation notes:
+ * - CCD register address information as well as the calculation to
+ * convert raw register values is from https://github.com/ocerman/zenpower.
+ * The information is not confirmed from chip datasheets, but experiments
+ * suggest that it provides reasonable temperature values.
+ * - Register addresses to read chip voltage and current are also from
+ * https://github.com/ocerman/zenpower, and not confirmed from chip
+ * datasheets. Current calibration is board specific and not typically
+ * shared by board vendors. For this reason, current values are
+ * normalized to report 1A/LSB for core current and and 0.25A/LSB for SoC
+ * current. Reported values can be adjusted using the sensors configuration
+ * file.
*/
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -31,22 +47,22 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
#endif
/* CPUID function 0x80000001, ebx */
-#define CPUID_PKGTYPE_MASK 0xf0000000
+#define CPUID_PKGTYPE_MASK GENMASK(31, 28)
#define CPUID_PKGTYPE_F 0x00000000
#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
/* DRAM controller (PCI function 2) */
#define REG_DCT0_CONFIG_HIGH 0x094
-#define DDR3_MODE 0x00000100
+#define DDR3_MODE BIT(8)
/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
-#define HTC_ENABLE 0x00000001
+#define HTC_ENABLE BIT(0)
#define REG_REPORTED_TEMPERATURE 0xa4
#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
-#define NB_CAP_HTC 0x00000400
+#define NB_CAP_HTC BIT(10)
/*
* For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
@@ -60,6 +76,20 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
/* F17h M01h Access througn SMN */
#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET 0x00059800
+#define F17H_M70H_CCD_TEMP(x) (0x00059954 + ((x) * 4))
+#define F17H_M70H_CCD_TEMP_VALID BIT(11)
+#define F17H_M70H_CCD_TEMP_MASK GENMASK(10, 0)
+
+#define F17H_M01H_SVI 0x0005A000
+#define F17H_M01H_SVI_TEL_PLANE0 (F17H_M01H_SVI + 0xc)
+#define F17H_M01H_SVI_TEL_PLANE1 (F17H_M01H_SVI + 0x10)
+
+#define CUR_TEMP_SHIFT 21
+#define CUR_TEMP_RANGE_SEL_MASK BIT(19)
+
+#define CFACTOR_ICORE 1000000 /* 1A / LSB */
+#define CFACTOR_ISOC 250000 /* 0.25A / LSB */
+
struct k10temp_data {
struct pci_dev *pdev;
void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
@@ -67,6 +97,10 @@ struct k10temp_data {
int temp_offset;
u32 temp_adjust_mask;
bool show_tdie;
+ u32 show_tccd;
+ u32 svi_addr[2];
+ bool show_current;
+ int cfactor[2];
};
struct tctl_offset {
@@ -84,6 +118,16 @@ static const struct tctl_offset tctl_offset_table[] = {
{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
};
+static bool is_threadripper(void)
+{
+ return strstr(boot_cpu_data.x86_model_id, "Threadripper");
+}
+
+static bool is_epyc(void)
+{
+ return strstr(boot_cpu_data.x86_model_id, "EPYC");
+}
+
static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
{
pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);
@@ -123,130 +167,237 @@ static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval)
F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval);
}
-static unsigned int get_raw_temp(struct k10temp_data *data)
+static long get_raw_temp(struct k10temp_data *data)
{
- unsigned int temp;
u32 regval;
+ long temp;
data->read_tempreg(data->pdev, &regval);
- temp = (regval >> 21) * 125;
+ temp = (regval >> CUR_TEMP_SHIFT) * 125;
if (regval & data->temp_adjust_mask)
temp -= 49000;
return temp;
}
-static ssize_t temp1_input_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct k10temp_data *data = dev_get_drvdata(dev);
- unsigned int temp = get_raw_temp(data);
+const char *k10temp_temp_label[] = {
+ "Tdie",
+ "Tctl",
+ "Tccd1",
+ "Tccd2",
+ "Tccd3",
+ "Tccd4",
+ "Tccd5",
+ "Tccd6",
+ "Tccd7",
+ "Tccd8",
+};
- if (temp > data->temp_offset)
- temp -= data->temp_offset;
- else
- temp = 0;
+const char *k10temp_in_label[] = {
+ "Vcore",
+ "Vsoc",
+};
- return sprintf(buf, "%u\n", temp);
-}
+const char *k10temp_curr_label[] = {
+ "Icore",
+ "Isoc",
+};
-static ssize_t temp2_input_show(struct device *dev,
- struct device_attribute *devattr, char *buf)
+static int k10temp_read_labels(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
{
- struct k10temp_data *data = dev_get_drvdata(dev);
- unsigned int temp = get_raw_temp(data);
-
- return sprintf(buf, "%u\n", temp);
+ switch (type) {
+ case hwmon_temp:
+ *str = k10temp_temp_label[channel];
+ break;
+ case hwmon_in:
+ *str = k10temp_in_label[channel];
+ break;
+ case hwmon_curr:
+ *str = k10temp_curr_label[channel];
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
}
-static ssize_t temp_label_show(struct device *dev,
- struct device_attribute *devattr, char *buf)
+static int k10temp_read_curr(struct device *dev, u32 attr, int channel,
+ long *val)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct k10temp_data *data = dev_get_drvdata(dev);
+ u32 regval;
- return sprintf(buf, "%s\n", attr->index ? "Tctl" : "Tdie");
+ switch (attr) {
+ case hwmon_curr_input:
+ amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+ data->svi_addr[channel], &regval);
+ *val = DIV_ROUND_CLOSEST(data->cfactor[channel] *
+ (regval & 0xff),
+ 1000);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
}
-static ssize_t temp1_max_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static int k10temp_read_in(struct device *dev, u32 attr, int channel, long *val)
{
- return sprintf(buf, "%d\n", 70 * 1000);
+ struct k10temp_data *data = dev_get_drvdata(dev);
+ u32 regval;
+
+ switch (attr) {
+ case hwmon_in_input:
+ amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+ data->svi_addr[channel], &regval);
+ regval = (regval >> 16) & 0xff;
+ *val = DIV_ROUND_CLOSEST(155000 - regval * 625, 100);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
}
-static ssize_t temp_crit_show(struct device *dev,
- struct device_attribute *devattr, char *buf)
+static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
+ long *val)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct k10temp_data *data = dev_get_drvdata(dev);
- int show_hyst = attr->index;
u32 regval;
- int value;
- data->read_htcreg(data->pdev, &regval);
- value = ((regval >> 16) & 0x7f) * 500 + 52000;
- if (show_hyst)
- value -= ((regval >> 24) & 0xf) * 500;
- return sprintf(buf, "%d\n", value);
+ switch (attr) {
+ case hwmon_temp_input:
+ switch (channel) {
+ case 0: /* Tdie */
+ *val = get_raw_temp(data) - data->temp_offset;
+ if (*val < 0)
+ *val = 0;
+ break;
+ case 1: /* Tctl */
+ *val = get_raw_temp(data);
+ if (*val < 0)
+ *val = 0;
+ break;
+ case 2 ... 9: /* Tccd{1-8} */
+ amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+ F17H_M70H_CCD_TEMP(channel - 2), &regval);
+ *val = (regval & F17H_M70H_CCD_TEMP_MASK) * 125 - 49000;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ break;
+ case hwmon_temp_max:
+ *val = 70 * 1000;
+ break;
+ case hwmon_temp_crit:
+ data->read_htcreg(data->pdev, &regval);
+ *val = ((regval >> 16) & 0x7f) * 500 + 52000;
+ break;
+ case hwmon_temp_crit_hyst:
+ data->read_htcreg(data->pdev, &regval);
+ *val = (((regval >> 16) & 0x7f)
+ - ((regval >> 24) & 0xf)) * 500 + 52000;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
}
-static DEVICE_ATTR_RO(temp1_input);
-static DEVICE_ATTR_RO(temp1_max);
-static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_crit, 0);
-static SENSOR_DEVICE_ATTR_RO(temp1_crit_hyst, temp_crit, 1);
-
-static SENSOR_DEVICE_ATTR_RO(temp1_label, temp_label, 0);
-static DEVICE_ATTR_RO(temp2_input);
-static SENSOR_DEVICE_ATTR_RO(temp2_label, temp_label, 1);
+static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ switch (type) {
+ case hwmon_temp:
+ return k10temp_read_temp(dev, attr, channel, val);
+ case hwmon_in:
+ return k10temp_read_in(dev, attr, channel, val);
+ case hwmon_curr:
+ return k10temp_read_curr(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
-static umode_t k10temp_is_visible(struct kobject *kobj,
- struct attribute *attr, int index)
+static umode_t k10temp_is_visible(const void *_data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
{
- struct device *dev = container_of(kobj, struct device, kobj);
- struct k10temp_data *data = dev_get_drvdata(dev);
+ const struct k10temp_data *data = _data;
struct pci_dev *pdev = data->pdev;
u32 reg;
- switch (index) {
- case 0 ... 1: /* temp1_input, temp1_max */
- default:
- break;
- case 2 ... 3: /* temp1_crit, temp1_crit_hyst */
- if (!data->read_htcreg)
- return 0;
-
- pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES,
- &reg);
- if (!(reg & NB_CAP_HTC))
- return 0;
-
- data->read_htcreg(data->pdev, &reg);
- if (!(reg & HTC_ENABLE))
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ switch (channel) {
+ case 0: /* Tdie, or Tctl if we don't show it */
+ break;
+ case 1: /* Tctl */
+ if (!data->show_tdie)
+ return 0;
+ break;
+ case 2 ... 9: /* Tccd{1-8} */
+ if (!(data->show_tccd & BIT(channel - 2)))
+ return 0;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case hwmon_temp_max:
+ if (channel || data->show_tdie)
+ return 0;
+ break;
+ case hwmon_temp_crit:
+ case hwmon_temp_crit_hyst:
+ if (channel || !data->read_htcreg)
+ return 0;
+
+ pci_read_config_dword(pdev,
+ REG_NORTHBRIDGE_CAPABILITIES,
+ &reg);
+ if (!(reg & NB_CAP_HTC))
+ return 0;
+
+ data->read_htcreg(data->pdev, &reg);
+ if (!(reg & HTC_ENABLE))
+ return 0;
+ break;
+ case hwmon_temp_label:
+ /* No labels if we don't show the die temperature */
+ if (!data->show_tdie)
+ return 0;
+ switch (channel) {
+ case 0: /* Tdie */
+ case 1: /* Tctl */
+ break;
+ case 2 ... 9: /* Tccd{1-8} */
+ if (!(data->show_tccd & BIT(channel - 2)))
+ return 0;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ default:
return 0;
+ }
break;
- case 4 ... 6: /* temp1_label, temp2_input, temp2_label */
- if (!data->show_tdie)
+ case hwmon_in:
+ case hwmon_curr:
+ if (!data->show_current)
return 0;
break;
+ default:
+ return 0;
}
- return attr->mode;
+ return 0444;
}
-static struct attribute *k10temp_attrs[] = {
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_max.attr,
- &sensor_dev_attr_temp1_crit.dev_attr.attr,
- &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
- &sensor_dev_attr_temp1_label.dev_attr.attr,
- &dev_attr_temp2_input.attr,
- &sensor_dev_attr_temp2_label.dev_attr.attr,
- NULL
-};
-
-static const struct attribute_group k10temp_group = {
- .attrs = k10temp_attrs,
- .is_visible = k10temp_is_visible,
-};
-__ATTRIBUTE_GROUPS(k10temp);
-
static bool has_erratum_319(struct pci_dev *pdev)
{
u32 pkg_type, reg_dram_cfg;
@@ -281,8 +432,125 @@ static bool has_erratum_319(struct pci_dev *pdev)
(boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
}
-static int k10temp_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
+#ifdef CONFIG_DEBUG_FS
+
+static void k10temp_smn_regs_show(struct seq_file *s, struct pci_dev *pdev,
+ u32 addr, int count)
+{
+ u32 reg;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (!(i & 3))
+ seq_printf(s, "0x%06x: ", addr + i * 4);
+ amd_smn_read(amd_pci_dev_to_node_id(pdev), addr + i * 4, &reg);
+ seq_printf(s, "%08x ", reg);
+ if ((i & 3) == 3)
+ seq_puts(s, "\n");
+ }
+}
+
+static int svi_show(struct seq_file *s, void *unused)
+{
+ struct k10temp_data *data = s->private;
+
+ k10temp_smn_regs_show(s, data->pdev, F17H_M01H_SVI, 32);
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(svi);
+
+static int thm_show(struct seq_file *s, void *unused)
+{
+ struct k10temp_data *data = s->private;
+
+ k10temp_smn_regs_show(s, data->pdev,
+ F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, 256);
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(thm);
+
+static void k10temp_debugfs_cleanup(void *ddir)
+{
+ debugfs_remove_recursive(ddir);
+}
+
+static void k10temp_init_debugfs(struct k10temp_data *data)
+{
+ struct dentry *debugfs;
+ char name[32];
+
+ /* Only show debugfs data for Family 17h/18h CPUs */
+ if (!data->show_tdie)
+ return;
+
+ scnprintf(name, sizeof(name), "k10temp-%s", pci_name(data->pdev));
+
+ debugfs = debugfs_create_dir(name, NULL);
+ if (debugfs) {
+ debugfs_create_file("svi", 0444, debugfs, data, &svi_fops);
+ debugfs_create_file("thm", 0444, debugfs, data, &thm_fops);
+ devm_add_action_or_reset(&data->pdev->dev,
+ k10temp_debugfs_cleanup, debugfs);
+ }
+}
+
+#else
+
+static void k10temp_init_debugfs(struct k10temp_data *data)
+{
+}
+
+#endif
+
+static const struct hwmon_channel_info *k10temp_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_MAX |
+ HWMON_T_CRIT | HWMON_T_CRIT_HYST |
+ HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_CHANNEL_INFO(curr,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL),
+ NULL
+};
+
+static const struct hwmon_ops k10temp_hwmon_ops = {
+ .is_visible = k10temp_is_visible,
+ .read = k10temp_read,
+ .read_string = k10temp_read_labels,
+};
+
+static const struct hwmon_chip_info k10temp_chip_info = {
+ .ops = &k10temp_hwmon_ops,
+ .info = k10temp_info,
+};
+
+static void k10temp_get_ccd_support(struct pci_dev *pdev,
+ struct k10temp_data *data, int limit)
+{
+ u32 regval;
+ int i;
+
+ for (i = 0; i < limit; i++) {
+ amd_smn_read(amd_pci_dev_to_node_id(pdev),
+ F17H_M70H_CCD_TEMP(i), &regval);
+ if (regval & F17H_M70H_CCD_TEMP_VALID)
+ data->show_tccd |= BIT(i);
+ }
+}
+
+static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int unreliable = has_erratum_319(pdev);
struct device *dev = &pdev->dev;
@@ -312,9 +580,32 @@ static int k10temp_probe(struct pci_dev *pdev,
data->read_htcreg = read_htcreg_nb_f15;
data->read_tempreg = read_tempreg_nb_f15;
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
- data->temp_adjust_mask = 0x80000;
+ data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_f17;
data->show_tdie = true;
+
+ switch (boot_cpu_data.x86_model) {
+ case 0x1: /* Zen */
+ case 0x8: /* Zen+ */
+ case 0x11: /* Zen APU */
+ case 0x18: /* Zen+ APU */
+ data->show_current = !is_threadripper() && !is_epyc();
+ data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE0;
+ data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE1;
+ data->cfactor[0] = CFACTOR_ICORE;
+ data->cfactor[1] = CFACTOR_ISOC;
+ k10temp_get_ccd_support(pdev, data, 4);
+ break;
+ case 0x31: /* Zen2 Threadripper */
+ case 0x71: /* Zen2 */
+ data->show_current = !is_threadripper() && !is_epyc();
+ data->cfactor[0] = CFACTOR_ICORE;
+ data->cfactor[1] = CFACTOR_ISOC;
+ data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE1;
+ data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE0;
+ k10temp_get_ccd_support(pdev, data, 8);
+ break;
+ }
} else {
data->read_htcreg = read_htcreg_pci;
data->read_tempreg = read_tempreg_pci;
@@ -330,9 +621,15 @@ static int k10temp_probe(struct pci_dev *pdev,
}
}
- hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", data,
- k10temp_groups);
- return PTR_ERR_OR_ZERO(hwmon_dev);
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, "k10temp", data,
+ &k10temp_chip_info,
+ NULL);
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ k10temp_init_debugfs(data);
+
+ return 0;
}
static const struct pci_device_id k10temp_id_table[] = {
diff --git a/drivers/hwmon/max31730.c b/drivers/hwmon/max31730.c
new file mode 100644
index 000000000000..eb22a34dc36b
--- /dev/null
+++ b/drivers/hwmon/max31730.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MAX31730 3-Channel Remote Temperature Sensor
+ *
+ * Copyright (c) 2019 Guenter Roeck <linux@roeck-us.net>
+ */
+
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x1c, 0x1d, 0x1e, 0x1f, 0x4c,
+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+
+/* The MAX31730 registers */
+#define MAX31730_REG_TEMP 0x00
+#define MAX31730_REG_CONF 0x13
+#define MAX31730_STOP BIT(7)
+#define MAX31730_EXTRANGE BIT(1)
+#define MAX31730_REG_TEMP_OFFSET 0x16
+#define MAX31730_TEMP_OFFSET_BASELINE 0x77
+#define MAX31730_REG_OFFSET_ENABLE 0x17
+#define MAX31730_REG_TEMP_MAX 0x20
+#define MAX31730_REG_TEMP_MIN 0x30
+#define MAX31730_REG_STATUS_HIGH 0x32
+#define MAX31730_REG_STATUS_LOW 0x33
+#define MAX31730_REG_CHANNEL_ENABLE 0x35
+#define MAX31730_REG_TEMP_FAULT 0x36
+
+#define MAX31730_REG_MFG_ID 0x50
+#define MAX31730_MFG_ID 0x4d
+#define MAX31730_REG_MFG_REV 0x51
+#define MAX31730_MFG_REV 0x01
+
+#define MAX31730_TEMP_MIN (-128000)
+#define MAX31730_TEMP_MAX 127937
+
+/* Each client has this additional data */
+struct max31730_data {
+ struct i2c_client *client;
+ u8 orig_conf;
+ u8 current_conf;
+ u8 offset_enable;
+ u8 channel_enable;
+};
+
+/*-----------------------------------------------------------------------*/
+
+static inline long max31730_reg_to_mc(s16 temp)
+{
+ return DIV_ROUND_CLOSEST((temp >> 4) * 1000, 16);
+}
+
+static int max31730_write_config(struct max31730_data *data, u8 set_mask,
+ u8 clr_mask)
+{
+ u8 value;
+
+ clr_mask |= MAX31730_EXTRANGE;
+ value = data->current_conf & ~clr_mask;
+ value |= set_mask;
+
+ if (data->current_conf != value) {
+ s32 err;
+
+ err = i2c_smbus_write_byte_data(data->client, MAX31730_REG_CONF,
+ value);
+ if (err)
+ return err;
+ data->current_conf = value;
+ }
+ return 0;
+}
+
+static int max31730_set_enable(struct i2c_client *client, int reg,
+ u8 *confdata, int channel, bool enable)
+{
+ u8 regval = *confdata;
+ int err;
+
+ if (enable)
+ regval |= BIT(channel);
+ else
+ regval &= ~BIT(channel);
+
+ if (regval != *confdata) {
+ err = i2c_smbus_write_byte_data(client, reg, regval);
+ if (err)
+ return err;
+ *confdata = regval;
+ }
+ return 0;
+}
+
+static int max31730_set_offset_enable(struct max31730_data *data, int channel,
+ bool enable)
+{
+ return max31730_set_enable(data->client, MAX31730_REG_OFFSET_ENABLE,
+ &data->offset_enable, channel, enable);
+}
+
+static int max31730_set_channel_enable(struct max31730_data *data, int channel,
+ bool enable)
+{
+ return max31730_set_enable(data->client, MAX31730_REG_CHANNEL_ENABLE,
+ &data->channel_enable, channel, enable);
+}
+
+static int max31730_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct max31730_data *data = dev_get_drvdata(dev);
+ int regval, reg, offset;
+
+ if (type != hwmon_temp)
+ return -EINVAL;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ if (!(data->channel_enable & BIT(channel)))
+ return -ENODATA;
+ reg = MAX31730_REG_TEMP + (channel * 2);
+ break;
+ case hwmon_temp_max:
+ reg = MAX31730_REG_TEMP_MAX + (channel * 2);
+ break;
+ case hwmon_temp_min:
+ reg = MAX31730_REG_TEMP_MIN;
+ break;
+ case hwmon_temp_enable:
+ *val = !!(data->channel_enable & BIT(channel));
+ return 0;
+ case hwmon_temp_offset:
+ if (!channel)
+ return -EINVAL;
+ if (!(data->offset_enable & BIT(channel))) {
+ *val = 0;
+ return 0;
+ }
+ offset = i2c_smbus_read_byte_data(data->client,
+ MAX31730_REG_TEMP_OFFSET);
+ if (offset < 0)
+ return offset;
+ *val = (offset - MAX31730_TEMP_OFFSET_BASELINE) * 125;
+ return 0;
+ case hwmon_temp_fault:
+ regval = i2c_smbus_read_byte_data(data->client,
+ MAX31730_REG_TEMP_FAULT);
+ if (regval < 0)
+ return regval;
+ *val = !!(regval & BIT(channel));
+ return 0;
+ case hwmon_temp_min_alarm:
+ regval = i2c_smbus_read_byte_data(data->client,
+ MAX31730_REG_STATUS_LOW);
+ if (regval < 0)
+ return regval;
+ *val = !!(regval & BIT(channel));
+ return 0;
+ case hwmon_temp_max_alarm:
+ regval = i2c_smbus_read_byte_data(data->client,
+ MAX31730_REG_STATUS_HIGH);
+ if (regval < 0)
+ return regval;
+ *val = !!(regval & BIT(channel));
+ return 0;
+ default:
+ return -EINVAL;
+ }
+ regval = i2c_smbus_read_word_swapped(data->client, reg);
+ if (regval < 0)
+ return regval;
+
+ *val = max31730_reg_to_mc(regval);
+
+ return 0;
+}
+
+static int max31730_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct max31730_data *data = dev_get_drvdata(dev);
+ int reg, err;
+
+ if (type != hwmon_temp)
+ return -EINVAL;
+
+ switch (attr) {
+ case hwmon_temp_max:
+ reg = MAX31730_REG_TEMP_MAX + channel * 2;
+ break;
+ case hwmon_temp_min:
+ reg = MAX31730_REG_TEMP_MIN;
+ break;
+ case hwmon_temp_enable:
+ if (val != 0 && val != 1)
+ return -EINVAL;
+ return max31730_set_channel_enable(data, channel, val);
+ case hwmon_temp_offset:
+ val = clamp_val(val, -14875, 17000) + 14875;
+ val = DIV_ROUND_CLOSEST(val, 125);
+ err = max31730_set_offset_enable(data, channel,
+ val != MAX31730_TEMP_OFFSET_BASELINE);
+ if (err)
+ return err;
+ return i2c_smbus_write_byte_data(data->client,
+ MAX31730_REG_TEMP_OFFSET, val);
+ default:
+ return -EINVAL;
+ }
+
+ val = clamp_val(val, MAX31730_TEMP_MIN, MAX31730_TEMP_MAX);
+ val = DIV_ROUND_CLOSEST(val << 4, 1000) << 4;
+
+ return i2c_smbus_write_word_swapped(data->client, reg, (u16)val);
+}
+
+static umode_t max31730_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_min_alarm:
+ case hwmon_temp_max_alarm:
+ case hwmon_temp_fault:
+ return 0444;
+ case hwmon_temp_min:
+ return channel ? 0444 : 0644;
+ case hwmon_temp_offset:
+ case hwmon_temp_enable:
+ case hwmon_temp_max:
+ return 0644;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static const struct hwmon_channel_info *max31730_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_ENABLE |
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_OFFSET | HWMON_T_ENABLE |
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
+ HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_OFFSET | HWMON_T_ENABLE |
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
+ HWMON_T_FAULT,
+ HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
+ HWMON_T_OFFSET | HWMON_T_ENABLE |
+ HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
+ HWMON_T_FAULT
+ ),
+ NULL
+};
+
+static const struct hwmon_ops max31730_hwmon_ops = {
+ .is_visible = max31730_is_visible,
+ .read = max31730_read,
+ .write = max31730_write,
+};
+
+static const struct hwmon_chip_info max31730_chip_info = {
+ .ops = &max31730_hwmon_ops,
+ .info = max31730_info,
+};
+
+static void max31730_remove(void *data)
+{
+ struct max31730_data *max31730 = data;
+ struct i2c_client *client = max31730->client;
+
+ i2c_smbus_write_byte_data(client, MAX31730_REG_CONF,
+ max31730->orig_conf);
+}
+
+static int
+max31730_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct max31730_data *data;
+ int status, err;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+ return -EIO;
+
+ data = devm_kzalloc(dev, sizeof(struct max31730_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+
+ /* Cache original configuration and enable status */
+ status = i2c_smbus_read_byte_data(client, MAX31730_REG_CHANNEL_ENABLE);
+ if (status < 0)
+ return status;
+ data->channel_enable = status;
+
+ status = i2c_smbus_read_byte_data(client, MAX31730_REG_OFFSET_ENABLE);
+ if (status < 0)
+ return status;
+ data->offset_enable = status;
+
+ status = i2c_smbus_read_byte_data(client, MAX31730_REG_CONF);
+ if (status < 0)
+ return status;
+ data->orig_conf = status;
+ data->current_conf = status;
+
+ err = max31730_write_config(data,
+ data->channel_enable ? 0 : MAX31730_STOP,
+ data->channel_enable ? MAX31730_STOP : 0);
+ if (err)
+ return err;
+
+ dev_set_drvdata(dev, data);
+
+ err = devm_add_action_or_reset(dev, max31730_remove, data);
+ if (err)
+ return err;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+ data,
+ &max31730_chip_info,
+ NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id max31730_ids[] = {
+ { "max31730", 0, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max31730_ids);
+
+static const struct of_device_id __maybe_unused max31730_of_match[] = {
+ {
+ .compatible = "maxim,max31730",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, max31730_of_match);
+
+static bool max31730_check_reg_temp(struct i2c_client *client,
+ int reg)
+{
+ int regval;
+
+ regval = i2c_smbus_read_byte_data(client, reg + 1);
+ return regval < 0 || (regval & 0x0f);
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max31730_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int regval;
+ int i;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_ID);
+ if (regval != MAX31730_MFG_ID)
+ return -ENODEV;
+ regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_REV);
+ if (regval != MAX31730_MFG_REV)
+ return -ENODEV;
+
+ /* lower 4 bit of temperature and limit registers must be 0 */
+ if (max31730_check_reg_temp(client, MAX31730_REG_TEMP_MIN))
+ return -ENODEV;
+
+ for (i = 0; i < 4; i++) {
+ if (max31730_check_reg_temp(client, MAX31730_REG_TEMP + i * 2))
+ return -ENODEV;
+ if (max31730_check_reg_temp(client,
+ MAX31730_REG_TEMP_MAX + i * 2))
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, "max31730", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int __maybe_unused max31730_suspend(struct device *dev)
+{
+ struct max31730_data *data = dev_get_drvdata(dev);
+
+ return max31730_write_config(data, MAX31730_STOP, 0);
+}
+
+static int __maybe_unused max31730_resume(struct device *dev)
+{
+ struct max31730_data *data = dev_get_drvdata(dev);
+
+ return max31730_write_config(data, 0, MAX31730_STOP);
+}
+
+static SIMPLE_DEV_PM_OPS(max31730_pm_ops, max31730_suspend, max31730_resume);
+
+static struct i2c_driver max31730_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "max31730",
+ .of_match_table = of_match_ptr(max31730_of_match),
+ .pm = &max31730_pm_ops,
+ },
+ .probe = max31730_probe,
+ .id_table = max31730_ids,
+ .detect = max31730_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(max31730_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("MAX31730 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 59859979571d..a9ea06204767 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -20,8 +20,8 @@ config SENSORS_PMBUS
help
If you say yes here you get hardware monitoring support for generic
PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
- MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20,
- TPS544B25, TPS544C20, TPS544C25, and UDT020.
+ MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400,
+ TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
This driver can also be built as a module. If so, the module will
be called pmbus.
@@ -145,6 +145,15 @@ config SENSORS_MAX16064
This driver can also be built as a module. If so, the module will
be called max16064.
+config SENSORS_MAX20730
+ tristate "Maxim MAX20730, MAX20734, MAX20743"
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX20730, MAX20734, and MAX20743.
+
+ This driver can also be built as a module. If so, the module will
+ be called max20730.
+
config SENSORS_MAX20751
tristate "Maxim MAX20751"
help
@@ -200,20 +209,20 @@ config SENSORS_TPS40422
be called tps40422.
config SENSORS_TPS53679
- tristate "TI TPS53679"
+ tristate "TI TPS53679, TPS53688"
help
If you say yes here you get hardware monitoring support for TI
- TPS53679.
+ TPS53679, TPS53688
This driver can also be built as a module. If so, the module will
be called tps53679.
config SENSORS_UCD9000
- tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
+ tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
help
If you say yes here you get hardware monitoring support for TI
- UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
- Health Controllers.
+ UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer
+ and System Health Controllers.
This driver can also be built as a module. If so, the module will
be called ucd9000.
@@ -228,6 +237,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_XDPE122
+ tristate "Infineon XDPE122 family"
+ help
+ If you say yes here you get hardware monitoring support for Infineon
+ XDPE12254, XDPE12284, device.
+
+ This driver can also be built as a module. If so, the module will
+ be called xdpe12284.
+
config SENSORS_ZL6100
tristate "Intersil ZL6100 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 3f8c1014938b..5feb45806123 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
+obj-$(CONFIG_SENSORS_MAX20730) += max20730.o
obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
@@ -26,4 +27,5 @@ obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index d359b76bcb36..3795fe55b84f 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -20,12 +20,15 @@
#define CFFPS_FRU_CMD 0x9A
#define CFFPS_PN_CMD 0x9B
+#define CFFPS_HEADER_CMD 0x9C
#define CFFPS_SN_CMD 0x9E
+#define CFFPS_MAX_POWER_OUT_CMD 0xA7
#define CFFPS_CCIN_CMD 0xBD
#define CFFPS_FW_CMD 0xFA
#define CFFPS1_FW_NUM_BYTES 4
#define CFFPS2_FW_NUM_WORDS 3
#define CFFPS_SYS_CONFIG_CMD 0xDA
+#define CFFPS_12VCS_VOUT_CMD 0xDE
#define CFFPS_INPUT_HISTORY_CMD 0xD6
#define CFFPS_INPUT_HISTORY_SIZE 100
@@ -44,22 +47,21 @@
#define CFFPS_MFR_VAUX_FAULT BIT(6)
#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
-/*
- * LED off state actually relinquishes LED control to PSU firmware, so it can
- * turn on the LED for faults.
- */
-#define CFFPS_LED_OFF 0
#define CFFPS_LED_BLINK BIT(0)
#define CFFPS_LED_ON BIT(1)
+#define CFFPS_LED_OFF BIT(2)
#define CFFPS_BLINK_RATE_MS 250
enum {
CFFPS_DEBUGFS_INPUT_HISTORY = 0,
CFFPS_DEBUGFS_FRU,
CFFPS_DEBUGFS_PN,
+ CFFPS_DEBUGFS_HEADER,
CFFPS_DEBUGFS_SN,
+ CFFPS_DEBUGFS_MAX_POWER_OUT,
CFFPS_DEBUGFS_CCIN,
CFFPS_DEBUGFS_FW,
+ CFFPS_DEBUGFS_ON_OFF_CONFIG,
CFFPS_DEBUGFS_NUM_ENTRIES
};
@@ -136,15 +138,15 @@ static ssize_t ibm_cffps_read_input_history(struct ibm_cffps *psu,
psu->input_history.byte_count);
}
-static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
+static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
u8 cmd;
int i, rc;
int *idxp = file->private_data;
int idx = *idxp;
struct ibm_cffps *psu = to_psu(idxp, idx);
- char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+ char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
pmbus_set_page(psu->client, 0);
@@ -157,9 +159,20 @@ static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf,
case CFFPS_DEBUGFS_PN:
cmd = CFFPS_PN_CMD;
break;
+ case CFFPS_DEBUGFS_HEADER:
+ cmd = CFFPS_HEADER_CMD;
+ break;
case CFFPS_DEBUGFS_SN:
cmd = CFFPS_SN_CMD;
break;
+ case CFFPS_DEBUGFS_MAX_POWER_OUT:
+ rc = i2c_smbus_read_word_swapped(psu->client,
+ CFFPS_MAX_POWER_OUT_CMD);
+ if (rc < 0)
+ return rc;
+
+ rc = snprintf(data, I2C_SMBUS_BLOCK_MAX, "%d", rc);
+ goto done;
case CFFPS_DEBUGFS_CCIN:
rc = i2c_smbus_read_word_swapped(psu->client, CFFPS_CCIN_CMD);
if (rc < 0)
@@ -199,6 +212,14 @@ static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf,
return -EOPNOTSUPP;
}
goto done;
+ case CFFPS_DEBUGFS_ON_OFF_CONFIG:
+ rc = i2c_smbus_read_byte_data(psu->client,
+ PMBUS_ON_OFF_CONFIG);
+ if (rc < 0)
+ return rc;
+
+ rc = snprintf(data, 3, "%02x", rc);
+ goto done;
default:
return -EINVAL;
}
@@ -214,9 +235,42 @@ done:
return simple_read_from_buffer(buf, count, ppos, data, rc);
}
+static ssize_t ibm_cffps_debugfs_write(struct file *file,
+ const char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ u8 data;
+ ssize_t rc;
+ int *idxp = file->private_data;
+ int idx = *idxp;
+ struct ibm_cffps *psu = to_psu(idxp, idx);
+
+ switch (idx) {
+ case CFFPS_DEBUGFS_ON_OFF_CONFIG:
+ pmbus_set_page(psu->client, 0);
+
+ rc = simple_write_to_buffer(&data, 1, ppos, buf, count);
+ if (rc <= 0)
+ return rc;
+
+ rc = i2c_smbus_write_byte_data(psu->client,
+ PMBUS_ON_OFF_CONFIG, data);
+ if (rc)
+ return rc;
+
+ rc = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return rc;
+}
+
static const struct file_operations ibm_cffps_fops = {
.llseek = noop_llseek,
- .read = ibm_cffps_debugfs_op,
+ .read = ibm_cffps_debugfs_read,
+ .write = ibm_cffps_debugfs_write,
.open = simple_open,
};
@@ -293,6 +347,9 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
if (mfr & CFFPS_MFR_PS_KILL)
rc |= PB_STATUS_OFF;
break;
+ case PMBUS_VIRT_READ_VMON:
+ rc = pmbus_read_word_data(client, page, CFFPS_12VCS_VOUT_CMD);
+ break;
default:
rc = -ENODATA;
break;
@@ -375,6 +432,9 @@ static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
rc = devm_led_classdev_register(dev, &psu->led);
if (rc)
dev_warn(dev, "failed to register led class: %d\n", rc);
+ else
+ i2c_smbus_write_byte_data(client, CFFPS_SYS_CONFIG_CMD,
+ CFFPS_LED_OFF);
}
static struct pmbus_driver_info ibm_cffps_info[] = {
@@ -396,7 +456,7 @@ static struct pmbus_driver_info ibm_cffps_info[] = {
PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
- PMBUS_HAVE_STATUS_FAN12,
+ PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_VMON,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT,
@@ -486,15 +546,24 @@ static int ibm_cffps_probe(struct i2c_client *client,
debugfs_create_file("part_number", 0444, ibm_cffps_dir,
&psu->debugfs_entries[CFFPS_DEBUGFS_PN],
&ibm_cffps_fops);
+ debugfs_create_file("header", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_HEADER],
+ &ibm_cffps_fops);
debugfs_create_file("serial_number", 0444, ibm_cffps_dir,
&psu->debugfs_entries[CFFPS_DEBUGFS_SN],
&ibm_cffps_fops);
+ debugfs_create_file("max_power_out", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_MAX_POWER_OUT],
+ &ibm_cffps_fops);
debugfs_create_file("ccin", 0444, ibm_cffps_dir,
&psu->debugfs_entries[CFFPS_DEBUGFS_CCIN],
&ibm_cffps_fops);
debugfs_create_file("fw_version", 0444, ibm_cffps_dir,
&psu->debugfs_entries[CFFPS_DEBUGFS_FW],
&ibm_cffps_fops);
+ debugfs_create_file("on_off_config", 0644, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_ON_OFF_CONFIG],
+ &ibm_cffps_fops);
return 0;
}
diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c
new file mode 100644
index 000000000000..294e2212f61e
--- /dev/null
+++ b/drivers/hwmon/pmbus/max20730.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MAX20730, MAX20734, and MAX20743 Integrated, Step-Down
+ * Switching Regulators
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pmbus.h>
+#include <linux/util_macros.h>
+#include "pmbus.h"
+
+enum chips {
+ max20730,
+ max20734,
+ max20743
+};
+
+struct max20730_data {
+ enum chips id;
+ struct pmbus_driver_info info;
+ struct mutex lock; /* Used to protect against parallel writes */
+ u16 mfr_devset1;
+};
+
+#define to_max20730_data(x) container_of(x, struct max20730_data, info)
+
+#define MAX20730_MFR_DEVSET1 0xd2
+
+/*
+ * Convert discreet value to direct data format. Strictly speaking, all passed
+ * values are constants, so we could do that calculation manually. On the
+ * downside, that would make the driver more difficult to maintain, so lets
+ * use this approach.
+ */
+static u16 val_to_direct(int v, enum pmbus_sensor_classes class,
+ const struct pmbus_driver_info *info)
+{
+ int R = info->R[class] - 3; /* take milli-units into account */
+ int b = info->b[class] * 1000;
+ long d;
+
+ d = v * info->m[class] + b;
+ /*
+ * R < 0 is true for all callers, so we don't need to bother
+ * about the R > 0 case.
+ */
+ while (R < 0) {
+ d = DIV_ROUND_CLOSEST(d, 10);
+ R++;
+ }
+ return (u16)d;
+}
+
+static long direct_to_val(u16 w, enum pmbus_sensor_classes class,
+ const struct pmbus_driver_info *info)
+{
+ int R = info->R[class] - 3;
+ int b = info->b[class] * 1000;
+ int m = info->m[class];
+ long d = (s16)w;
+
+ if (m == 0)
+ return 0;
+
+ while (R < 0) {
+ d *= 10;
+ R++;
+ }
+ d = (d - b) / m;
+ return d;
+}
+
+static u32 max_current[][5] = {
+ [max20730] = { 13000, 16600, 20100, 23600 },
+ [max20734] = { 21000, 27000, 32000, 38000 },
+ [max20743] = { 18900, 24100, 29200, 34100 },
+};
+
+static int max20730_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct max20730_data *data = to_max20730_data(info);
+ int ret = 0;
+ u32 max_c;
+
+ switch (reg) {
+ case PMBUS_OT_FAULT_LIMIT:
+ switch ((data->mfr_devset1 >> 11) & 0x3) {
+ case 0x0:
+ ret = val_to_direct(150000, PSC_TEMPERATURE, info);
+ break;
+ case 0x1:
+ ret = val_to_direct(130000, PSC_TEMPERATURE, info);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ break;
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ max_c = max_current[data->id][(data->mfr_devset1 >> 5) & 0x3];
+ ret = val_to_direct(max_c, PSC_CURRENT_OUT, info);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int max20730_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ struct pmbus_driver_info *info;
+ struct max20730_data *data;
+ u16 devset1;
+ int ret = 0;
+ int idx;
+
+ info = (struct pmbus_driver_info *)pmbus_get_driver_info(client);
+ data = to_max20730_data(info);
+
+ mutex_lock(&data->lock);
+ devset1 = data->mfr_devset1;
+
+ switch (reg) {
+ case PMBUS_OT_FAULT_LIMIT:
+ devset1 &= ~(BIT(11) | BIT(12));
+ if (direct_to_val(word, PSC_TEMPERATURE, info) < 140000)
+ devset1 |= BIT(11);
+ break;
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ devset1 &= ~(BIT(5) | BIT(6));
+
+ idx = find_closest(direct_to_val(word, PSC_CURRENT_OUT, info),
+ max_current[data->id], 4);
+ devset1 |= (idx << 5);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+
+ if (!ret && devset1 != data->mfr_devset1) {
+ ret = i2c_smbus_write_word_data(client, MAX20730_MFR_DEVSET1,
+ devset1);
+ if (!ret) {
+ data->mfr_devset1 = devset1;
+ pmbus_clear_cache(client);
+ }
+ }
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static const struct pmbus_driver_info max20730_info[] = {
+ [max20730] = {
+ .pages = 1,
+ .read_word_data = max20730_read_word_data,
+ .write_word_data = max20730_write_word_data,
+
+ /* Source : Maxim AN6042 */
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_TEMPERATURE] = 21,
+ .b[PSC_TEMPERATURE] = 5887,
+ .R[PSC_TEMPERATURE] = -1,
+
+ .format[PSC_VOLTAGE_IN] = direct,
+ .m[PSC_VOLTAGE_IN] = 3609,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+
+ /*
+ * Values in the datasheet are adjusted for temperature and
+ * for the relationship between Vin and Vout.
+ * Unfortunately, the data sheet suggests that Vout measurement
+ * may be scaled with a resistor array. This is indeed the case
+ * at least on the evaulation boards. As a result, any in-driver
+ * adjustments would either be wrong or require elaborate means
+ * to configure the scaling. Instead of doing that, just report
+ * raw values and let userspace handle adjustments.
+ */
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_CURRENT_OUT] = 153,
+ .b[PSC_CURRENT_OUT] = 4976,
+ .R[PSC_CURRENT_OUT] = -1,
+
+ .format[PSC_VOLTAGE_OUT] = linear,
+
+ .func[0] = PMBUS_HAVE_VIN |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ },
+ [max20734] = {
+ .pages = 1,
+ .read_word_data = max20730_read_word_data,
+ .write_word_data = max20730_write_word_data,
+
+ /* Source : Maxim AN6209 */
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_TEMPERATURE] = 21,
+ .b[PSC_TEMPERATURE] = 5887,
+ .R[PSC_TEMPERATURE] = -1,
+
+ .format[PSC_VOLTAGE_IN] = direct,
+ .m[PSC_VOLTAGE_IN] = 3592,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_CURRENT_OUT] = 111,
+ .b[PSC_CURRENT_OUT] = 3461,
+ .R[PSC_CURRENT_OUT] = -1,
+
+ .format[PSC_VOLTAGE_OUT] = linear,
+
+ .func[0] = PMBUS_HAVE_VIN |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ },
+ [max20743] = {
+ .pages = 1,
+ .read_word_data = max20730_read_word_data,
+ .write_word_data = max20730_write_word_data,
+
+ /* Source : Maxim AN6042 */
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_TEMPERATURE] = 21,
+ .b[PSC_TEMPERATURE] = 5887,
+ .R[PSC_TEMPERATURE] = -1,
+
+ .format[PSC_VOLTAGE_IN] = direct,
+ .m[PSC_VOLTAGE_IN] = 3597,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_CURRENT_OUT] = 95,
+ .b[PSC_CURRENT_OUT] = 5014,
+ .R[PSC_CURRENT_OUT] = -1,
+
+ .format[PSC_VOLTAGE_OUT] = linear,
+
+ .func[0] = PMBUS_HAVE_VIN |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ },
+};
+
+static int max20730_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+ struct max20730_data *data;
+ enum chips chip_id;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+ return ret;
+ }
+ if (ret != 5 || strncmp(buf, "MAXIM", 5)) {
+ buf[ret] = '\0';
+ dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
+ return -ENODEV;
+ }
+
+ /*
+ * The chips support reading PMBUS_MFR_MODEL. On both MAX20730
+ * and MAX20734, reading it returns M20743. Presumably that is
+ * the reason why the command is not documented. Unfortunately,
+ * that means that there is no reliable means to detect the chip.
+ * However, we can at least detect the chip series. Compare
+ * the returned value against 'M20743' and bail out if there is
+ * a mismatch. If that doesn't work for all chips, we may have
+ * to remove this check.
+ */
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read Manufacturer Model\n");
+ return ret;
+ }
+ if (ret != 6 || strncmp(buf, "M20743", 6)) {
+ buf[ret] = '\0';
+ dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_MFR_REVISION, buf);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read Manufacturer Revision\n");
+ return ret;
+ }
+ if (ret != 1 || buf[0] != 'F') {
+ buf[ret] = '\0';
+ dev_err(dev, "Unsupported Manufacturer Revision '%s'\n", buf);
+ return -ENODEV;
+ }
+
+ if (client->dev.of_node)
+ chip_id = (enum chips)of_device_get_match_data(dev);
+ else
+ chip_id = id->driver_data;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ data->id = chip_id;
+ mutex_init(&data->lock);
+ memcpy(&data->info, &max20730_info[chip_id], sizeof(data->info));
+
+ ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET1);
+ if (ret < 0)
+ return ret;
+ data->mfr_devset1 = ret;
+
+ return pmbus_do_probe(client, id, &data->info);
+}
+
+static const struct i2c_device_id max20730_id[] = {
+ { "max20730", max20730 },
+ { "max20734", max20734 },
+ { "max20743", max20743 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, max20730_id);
+
+static const struct of_device_id max20730_of_match[] = {
+ { .compatible = "maxim,max20730", .data = (void *)max20730 },
+ { .compatible = "maxim,max20734", .data = (void *)max20734 },
+ { .compatible = "maxim,max20743", .data = (void *)max20743 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, max20730_of_match);
+
+static struct i2c_driver max20730_driver = {
+ .driver = {
+ .name = "max20730",
+ .of_match_table = max20730_of_match,
+ },
+ .probe = max20730_probe,
+ .remove = pmbus_do_remove,
+ .id_table = max20730_id,
+};
+
+module_i2c_driver(max20730_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX20730 / MAX20734 / MAX20743");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/max20751.c b/drivers/hwmon/pmbus/max20751.c
index ee5f0cdbde06..da3c38cb9a5c 100644
--- a/drivers/hwmon/pmbus/max20751.c
+++ b/drivers/hwmon/pmbus/max20751.c
@@ -16,7 +16,7 @@ static struct pmbus_driver_info max20751_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = vid,
- .vrm_version = vr12,
+ .vrm_version[0] = vr12,
.format[PSC_TEMPERATURE] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_POWER] = linear,
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index c0bc43d01018..51e8312b6c2d 100644
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -115,7 +115,7 @@ static int pmbus_identify(struct i2c_client *client,
}
if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
- int vout_mode;
+ int vout_mode, i;
vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
if (vout_mode >= 0 && vout_mode != 0xff) {
@@ -124,7 +124,8 @@ static int pmbus_identify(struct i2c_client *client,
break;
case 1:
info->format[PSC_VOLTAGE_OUT] = vid;
- info->vrm_version = vr11;
+ for (i = 0; i < info->pages; i++)
+ info->vrm_version[i] = vr11;
break;
case 2:
info->format[PSC_VOLTAGE_OUT] = direct;
@@ -210,6 +211,7 @@ static const struct i2c_device_id pmbus_id[] = {
{"dps460", (kernel_ulong_t)&pmbus_info_one_skip},
{"dps650ab", (kernel_ulong_t)&pmbus_info_one_skip},
{"dps800", (kernel_ulong_t)&pmbus_info_one_skip},
+ {"max20796", (kernel_ulong_t)&pmbus_info_one},
{"mdt040", (kernel_ulong_t)&pmbus_info_one},
{"ncp4200", (kernel_ulong_t)&pmbus_info_one},
{"ncp4208", (kernel_ulong_t)&pmbus_info_one},
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index d198af3a92b6..13b34bd67f23 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -22,6 +22,8 @@ enum pmbus_regs {
PMBUS_CLEAR_FAULTS = 0x03,
PMBUS_PHASE = 0x04,
+ PMBUS_WRITE_PROTECT = 0x10,
+
PMBUS_CAPABILITY = 0x19,
PMBUS_QUERY = 0x1A,
@@ -226,6 +228,15 @@ enum pmbus_regs {
#define PB_OPERATION_CONTROL_ON BIT(7)
/*
+ * WRITE_PROTECT
+ */
+#define PB_WP_ALL BIT(7) /* all but WRITE_PROTECT */
+#define PB_WP_OP BIT(6) /* all but WP, OPERATION, PAGE */
+#define PB_WP_VOUT BIT(5) /* all but WP, OPERATION, PAGE, VOUT, ON_OFF */
+
+#define PB_WP_ANY (PB_WP_ALL | PB_WP_OP | PB_WP_VOUT)
+
+/*
* CAPABILITY
*/
#define PB_CAPABILITY_SMBALERT BIT(4)
@@ -377,12 +388,12 @@ enum pmbus_sensor_classes {
#define PMBUS_PAGE_VIRTUAL BIT(31)
enum pmbus_data_format { linear = 0, direct, vid };
-enum vrm_version { vr11 = 0, vr12, vr13 };
+enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
struct pmbus_driver_info {
int pages; /* Total number of pages */
enum pmbus_data_format format[PSC_NUM_CLASSES];
- enum vrm_version vrm_version;
+ enum vrm_version vrm_version[PMBUS_PAGES]; /* vrm version per page */
/*
* Support one set of coefficients for each sensor type
* Used for chips providing data in direct mode.
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 8470097907bc..d9c17feb7b4a 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -696,7 +696,7 @@ static long pmbus_reg2data_vid(struct pmbus_data *data,
long val = sensor->data;
long rv = 0;
- switch (data->info->vrm_version) {
+ switch (data->info->vrm_version[sensor->page]) {
case vr11:
if (val >= 0x02 && val <= 0xb2)
rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
@@ -709,6 +709,14 @@ static long pmbus_reg2data_vid(struct pmbus_data *data,
if (val >= 0x01)
rv = 500 + (val - 1) * 10;
break;
+ case imvp9:
+ if (val >= 0x01)
+ rv = 200 + (val - 1) * 10;
+ break;
+ case amd625mv:
+ if (val >= 0x0 && val <= 0xd8)
+ rv = DIV_ROUND_CLOSEST(155000 - val * 625, 100);
+ break;
}
return rv;
}
@@ -1088,6 +1096,9 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
snprintf(sensor->name, sizeof(sensor->name), "%s%d",
name, seq);
+ if (data->flags & PMBUS_WRITE_PROTECTED)
+ readonly = true;
+
sensor->page = page;
sensor->reg = reg;
sensor->class = class;
@@ -2141,6 +2152,15 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
client->flags |= I2C_CLIENT_PEC;
+ /*
+ * Check if the chip is write protected. If it is, we can not clear
+ * faults, and we should not try it. Also, in that case, writes into
+ * limit registers need to be disabled.
+ */
+ ret = i2c_smbus_read_byte_data(client, PMBUS_WRITE_PROTECT);
+ if (ret > 0 && (ret & PB_WP_ANY))
+ data->flags |= PMBUS_WRITE_PROTECTED | PMBUS_SKIP_STATUS_CHECK;
+
if (data->info->pages)
pmbus_clear_faults(client);
else
diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
index ebe3f023f840..517584cff3de 100644
--- a/drivers/hwmon/pmbus/pxe1610.c
+++ b/drivers/hwmon/pmbus/pxe1610.c
@@ -19,26 +19,30 @@
static int pxe1610_identify(struct i2c_client *client,
struct pmbus_driver_info *info)
{
- if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
- u8 vout_mode;
- int ret;
-
- /* Read the register with VOUT scaling value.*/
- ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
- if (ret < 0)
- return ret;
-
- vout_mode = ret & GENMASK(4, 0);
-
- switch (vout_mode) {
- case 1:
- info->vrm_version = vr12;
- break;
- case 2:
- info->vrm_version = vr13;
- break;
- default:
- return -ENODEV;
+ int i;
+
+ for (i = 0; i < PXE1610_NUM_PAGES; i++) {
+ if (pmbus_check_byte_register(client, i, PMBUS_VOUT_MODE)) {
+ u8 vout_mode;
+ int ret;
+
+ /* Read the register with VOUT scaling value.*/
+ ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+ if (ret < 0)
+ return ret;
+
+ vout_mode = ret & GENMASK(4, 0);
+
+ switch (vout_mode) {
+ case 1:
+ info->vrm_version[i] = vr12;
+ break;
+ case 2:
+ info->vrm_version[i] = vr13;
+ break;
+ default:
+ return -ENODEV;
+ }
}
}
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
index 86bb3aca09ed..9c22e9013dd7 100644
--- a/drivers/hwmon/pmbus/tps53679.c
+++ b/drivers/hwmon/pmbus/tps53679.c
@@ -24,27 +24,29 @@ static int tps53679_identify(struct i2c_client *client,
struct pmbus_driver_info *info)
{
u8 vout_params;
- int ret;
-
- /* Read the register with VOUT scaling value.*/
- ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
- if (ret < 0)
- return ret;
-
- vout_params = ret & GENMASK(4, 0);
-
- switch (vout_params) {
- case TPS53679_PROT_VR13_10MV:
- case TPS53679_PROT_VR12_5_10MV:
- info->vrm_version = vr13;
- break;
- case TPS53679_PROT_VR13_5MV:
- case TPS53679_PROT_VR12_5MV:
- case TPS53679_PROT_IMVP8_5MV:
- info->vrm_version = vr12;
- break;
- default:
- return -EINVAL;
+ int i, ret;
+
+ for (i = 0; i < TPS53679_PAGE_NUM; i++) {
+ /* Read the register with VOUT scaling value.*/
+ ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+ if (ret < 0)
+ return ret;
+
+ vout_params = ret & GENMASK(4, 0);
+
+ switch (vout_params) {
+ case TPS53679_PROT_VR13_10MV:
+ case TPS53679_PROT_VR12_5_10MV:
+ info->vrm_version[i] = vr13;
+ break;
+ case TPS53679_PROT_VR13_5MV:
+ case TPS53679_PROT_VR12_5MV:
+ case TPS53679_PROT_IMVP8_5MV:
+ info->vrm_version[i] = vr12;
+ break;
+ default:
+ return -EINVAL;
+ }
}
return 0;
@@ -83,6 +85,7 @@ static int tps53679_probe(struct i2c_client *client,
static const struct i2c_device_id tps53679_id[] = {
{"tps53679", 0},
+ {"tps53688", 0},
{}
};
@@ -90,6 +93,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id);
static const struct of_device_id __maybe_unused tps53679_of_match[] = {
{.compatible = "ti,tps53679"},
+ {.compatible = "ti,tps53688"},
{}
};
MODULE_DEVICE_TABLE(of, tps53679_of_match);
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index a9229c6b0e84..23ea3415f166 100644
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -18,7 +18,8 @@
#include <linux/gpio/driver.h>
#include "pmbus.h"
-enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
+enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd90320, ucd9090,
+ ucd90910 };
#define UCD9000_MONITOR_CONFIG 0xd5
#define UCD9000_NUM_PAGES 0xd6
@@ -38,7 +39,7 @@ enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
#define UCD9000_GPIO_OUTPUT 1
#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07)
-#define UCD9000_MON_PAGE(x) ((x) & 0x0f)
+#define UCD9000_MON_PAGE(x) ((x) & 0x1f)
#define UCD9000_MON_VOLTAGE 1
#define UCD9000_MON_TEMPERATURE 2
@@ -50,10 +51,12 @@ enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
#define UCD9000_GPIO_NAME_LEN 16
#define UCD9090_NUM_GPIOS 23
#define UCD901XX_NUM_GPIOS 26
+#define UCD90320_NUM_GPIOS 84
#define UCD90910_NUM_GPIOS 26
#define UCD9000_DEBUGFS_NAME_LEN 24
#define UCD9000_GPI_COUNT 8
+#define UCD90320_GPI_COUNT 32
struct ucd9000_data {
u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
@@ -131,6 +134,7 @@ static const struct i2c_device_id ucd9000_id[] = {
{"ucd90120", ucd90120},
{"ucd90124", ucd90124},
{"ucd90160", ucd90160},
+ {"ucd90320", ucd90320},
{"ucd9090", ucd9090},
{"ucd90910", ucd90910},
{}
@@ -155,6 +159,10 @@ static const struct of_device_id __maybe_unused ucd9000_of_match[] = {
.data = (void *)ucd90160
},
{
+ .compatible = "ti,ucd90320",
+ .data = (void *)ucd90320
+ },
+ {
.compatible = "ti,ucd9090",
.data = (void *)ucd9090
},
@@ -322,6 +330,9 @@ static void ucd9000_probe_gpio(struct i2c_client *client,
case ucd90160:
data->gpio.ngpio = UCD901XX_NUM_GPIOS;
break;
+ case ucd90320:
+ data->gpio.ngpio = UCD90320_NUM_GPIOS;
+ break;
case ucd90910:
data->gpio.ngpio = UCD90910_NUM_GPIOS;
break;
@@ -372,17 +383,18 @@ static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
struct ucd9000_debugfs_entry *entry = data;
struct i2c_client *client = entry->client;
u8 buffer[I2C_SMBUS_BLOCK_MAX];
- int ret;
+ int ret, i;
ret = ucd9000_get_mfr_status(client, buffer);
if (ret < 0)
return ret;
/*
- * Attribute only created for devices with gpi fault bits at bits
- * 16-23, which is the second byte of the response.
+ * GPI fault bits are in sets of 8, two bytes from end of response.
*/
- *val = !!(buffer[1] & BIT(entry->index));
+ i = ret - 3 - entry->index / 8;
+ if (i >= 0)
+ *val = !!(buffer[i] & BIT(entry->index % 8));
return 0;
}
@@ -422,7 +434,7 @@ static int ucd9000_init_debugfs(struct i2c_client *client,
{
struct dentry *debugfs;
struct ucd9000_debugfs_entry *entries;
- int i;
+ int i, gpi_count;
char name[UCD9000_DEBUGFS_NAME_LEN];
debugfs = pmbus_get_debugfs_dir(client);
@@ -435,18 +447,21 @@ static int ucd9000_init_debugfs(struct i2c_client *client,
/*
* Of the chips this driver supports, only the UCD9090, UCD90160,
- * and UCD90910 report GPI faults in their MFR_STATUS register, so only
- * create the GPI fault debugfs attributes for those chips.
+ * UCD90320, and UCD90910 report GPI faults in their MFR_STATUS
+ * register, so only create the GPI fault debugfs attributes for those
+ * chips.
*/
if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
- mid->driver_data == ucd90910) {
+ mid->driver_data == ucd90320 || mid->driver_data == ucd90910) {
+ gpi_count = mid->driver_data == ucd90320 ? UCD90320_GPI_COUNT
+ : UCD9000_GPI_COUNT;
entries = devm_kcalloc(&client->dev,
- UCD9000_GPI_COUNT, sizeof(*entries),
+ gpi_count, sizeof(*entries),
GFP_KERNEL);
if (!entries)
return -ENOMEM;
- for (i = 0; i < UCD9000_GPI_COUNT; i++) {
+ for (i = 0; i < gpi_count; i++) {
entries[i].client = client;
entries[i].index = i;
scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
new file mode 100644
index 000000000000..3d47806ff4d3
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers
+ *
+ * Copyright (c) 2020 Mellanox Technologies. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define XDPE122_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
+#define XDPE122_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
+#define XDPE122_PROT_IMVP9_10MV 0x03 /* IMVP9 mode, 10-mV DAC */
+#define XDPE122_AMD_625MV 0x10 /* AMD mode 6.25mV */
+#define XDPE122_PAGE_NUM 2
+
+static int xdpe122_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ u8 vout_params;
+ int i, ret;
+
+ for (i = 0; i < XDPE122_PAGE_NUM; i++) {
+ /* Read the register with VOUT scaling value.*/
+ ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+ if (ret < 0)
+ return ret;
+
+ vout_params = ret & GENMASK(4, 0);
+
+ switch (vout_params) {
+ case XDPE122_PROT_VR12_5_10MV:
+ info->vrm_version[i] = vr13;
+ break;
+ case XDPE122_PROT_VR12_5MV:
+ info->vrm_version[i] = vr12;
+ break;
+ case XDPE122_PROT_IMVP9_10MV:
+ info->vrm_version[i] = imvp9;
+ break;
+ case XDPE122_AMD_625MV:
+ info->vrm_version[i] = amd625mv;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static struct pmbus_driver_info xdpe122_info = {
+ .pages = XDPE122_PAGE_NUM,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = vid,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+ .identify = xdpe122_identify,
+};
+
+static int xdpe122_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pmbus_driver_info *info;
+
+ info = devm_kmemdup(&client->dev, &xdpe122_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id xdpe122_id[] = {
+ {"xdpe12254", 0},
+ {"xdpe12284", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, xdpe122_id);
+
+static const struct of_device_id __maybe_unused xdpe122_of_match[] = {
+ {.compatible = "infineon, xdpe12254"},
+ {.compatible = "infineon, xdpe12284"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, xdpe122_of_match);
+
+static struct i2c_driver xdpe122_driver = {
+ .driver = {
+ .name = "xdpe12284",
+ .of_match_table = of_match_ptr(xdpe122_of_match),
+ },
+ .probe = xdpe122_probe,
+ .remove = pmbus_do_remove,
+ .id_table = xdpe122_id,
+};
+
+module_i2c_driver(xdpe122_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon XDPE122 family");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 42ffd2e5182d..30b7b3ea8836 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -390,8 +390,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int pwm_fan_suspend(struct device *dev)
+static int pwm_fan_disable(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
struct pwm_args args;
@@ -418,6 +417,17 @@ static int pwm_fan_suspend(struct device *dev)
return 0;
}
+static void pwm_fan_shutdown(struct platform_device *pdev)
+{
+ pwm_fan_disable(&pdev->dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwm_fan_suspend(struct device *dev)
+{
+ return pwm_fan_disable(dev);
+}
+
static int pwm_fan_resume(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
@@ -455,6 +465,7 @@ MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
static struct platform_driver pwm_fan_driver = {
.probe = pwm_fan_probe,
+ .shutdown = pwm_fan_shutdown,
.driver = {
.name = "pwm-fan",
.pm = &pwm_fan_pm,
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index eb171d15ac48..7ffadc2da57b 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -28,8 +28,6 @@
* w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3
* w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
* w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3
- * nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3
- * nct6776f 9 5 3 9 0xC330 0xc1 0x5ca3
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -50,7 +48,7 @@
enum kinds {
w83627ehf, w83627dhg, w83627dhg_p, w83627uhg,
- w83667hg, w83667hg_b, nct6775, nct6776,
+ w83667hg, w83667hg_b,
};
/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
@@ -61,18 +59,12 @@ static const char * const w83627ehf_device_names[] = {
"w83627uhg",
"w83667hg",
"w83667hg",
- "nct6775",
- "nct6776",
};
static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-static unsigned short fan_debounce;
-module_param(fan_debounce, ushort, 0);
-MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
-
#define DRVNAME "w83627ehf"
/*
@@ -97,8 +89,6 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
#define SIO_W83627UHG_ID 0xa230
#define SIO_W83667HG_ID 0xa510
#define SIO_W83667HG_B_ID 0xb350
-#define SIO_NCT6775_ID 0xb470
-#define SIO_NCT6776_ID 0xc330
#define SIO_ID_MASK 0xFFF0
static inline void
@@ -187,11 +177,6 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 };
#define W83627EHF_REG_DIODE 0x59
#define W83627EHF_REG_SMI_OVT 0x4C
-/* NCT6775F has its own fan divider registers */
-#define NCT6775_REG_FANDIV1 0x506
-#define NCT6775_REG_FANDIV2 0x507
-#define NCT6775_REG_FAN_DEBOUNCE 0xf0
-
#define W83627EHF_REG_ALARM1 0x459
#define W83627EHF_REG_ALARM2 0x45A
#define W83627EHF_REG_ALARM3 0x45B
@@ -235,28 +220,6 @@ static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[]
static const u16 W83627EHF_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 };
-static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301 };
-static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302 };
-static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305 };
-static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { 0x106, 0x206, 0x306 };
-static const u16 NCT6775_REG_FAN_STOP_TIME[] = { 0x107, 0x207, 0x307 };
-static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309 };
-static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a };
-static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b };
-static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 };
-static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642};
-
-static const u16 NCT6775_REG_TEMP[]
- = { 0x27, 0x150, 0x250, 0x73, 0x75, 0x77, 0x62b, 0x62c, 0x62d };
-static const u16 NCT6775_REG_TEMP_CONFIG[]
- = { 0, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A };
-static const u16 NCT6775_REG_TEMP_HYST[]
- = { 0x3a, 0x153, 0x253, 0, 0, 0, 0x673, 0x678, 0x67D };
-static const u16 NCT6775_REG_TEMP_OVER[]
- = { 0x39, 0x155, 0x255, 0, 0, 0, 0x672, 0x677, 0x67C };
-static const u16 NCT6775_REG_TEMP_SOURCE[]
- = { 0x621, 0x622, 0x623, 0x100, 0x200, 0x300, 0x624, 0x625, 0x626 };
-
static const char *const w83667hg_b_temp_label[] = {
"SYSTIN",
"CPUTIN",
@@ -268,57 +231,7 @@ static const char *const w83667hg_b_temp_label[] = {
"PECI Agent 4"
};
-static const char *const nct6775_temp_label[] = {
- "",
- "SYSTIN",
- "CPUTIN",
- "AUXTIN",
- "AMD SB-TSI",
- "PECI Agent 0",
- "PECI Agent 1",
- "PECI Agent 2",
- "PECI Agent 3",
- "PECI Agent 4",
- "PECI Agent 5",
- "PECI Agent 6",
- "PECI Agent 7",
- "PCH_CHIP_CPU_MAX_TEMP",
- "PCH_CHIP_TEMP",
- "PCH_CPU_TEMP",
- "PCH_MCH_TEMP",
- "PCH_DIM0_TEMP",
- "PCH_DIM1_TEMP",
- "PCH_DIM2_TEMP",
- "PCH_DIM3_TEMP"
-};
-
-static const char *const nct6776_temp_label[] = {
- "",
- "SYSTIN",
- "CPUTIN",
- "AUXTIN",
- "SMBUSMASTER 0",
- "SMBUSMASTER 1",
- "SMBUSMASTER 2",
- "SMBUSMASTER 3",
- "SMBUSMASTER 4",
- "SMBUSMASTER 5",
- "SMBUSMASTER 6",
- "SMBUSMASTER 7",
- "PECI Agent 0",
- "PECI Agent 1",
- "PCH_CHIP_CPU_MAX_TEMP",
- "PCH_CHIP_TEMP",
- "PCH_CPU_TEMP",
- "PCH_MCH_TEMP",
- "PCH_DIM0_TEMP",
- "PCH_DIM1_TEMP",
- "PCH_DIM2_TEMP",
- "PCH_DIM3_TEMP",
- "BYTE_TEMP"
-};
-
-#define NUM_REG_TEMP ARRAY_SIZE(NCT6775_REG_TEMP)
+#define NUM_REG_TEMP ARRAY_SIZE(W83627EHF_REG_TEMP)
static int is_word_sized(u16 reg)
{
@@ -358,31 +271,6 @@ static unsigned int fan_from_reg8(u16 reg, unsigned int divreg)
return 1350000U / (reg << divreg);
}
-static unsigned int fan_from_reg13(u16 reg, unsigned int divreg)
-{
- if ((reg & 0xff1f) == 0xff1f)
- return 0;
-
- reg = (reg & 0x1f) | ((reg & 0xff00) >> 3);
-
- if (reg == 0)
- return 0;
-
- return 1350000U / reg;
-}
-
-static unsigned int fan_from_reg16(u16 reg, unsigned int divreg)
-{
- if (reg == 0 || reg == 0xffff)
- return 0;
-
- /*
- * Even though the registers are 16 bit wide, the fan divisor
- * still applies.
- */
- return 1350000U / (reg << divreg);
-}
-
static inline unsigned int
div_from_reg(u8 reg)
{
@@ -418,7 +306,6 @@ struct w83627ehf_data {
int addr; /* IO base of hw monitor block */
const char *name;
- struct device *hwmon_dev;
struct mutex lock;
u16 reg_temp[NUM_REG_TEMP];
@@ -428,20 +315,10 @@ struct w83627ehf_data {
u8 temp_src[NUM_REG_TEMP];
const char * const *temp_label;
- const u16 *REG_PWM;
- const u16 *REG_TARGET;
- const u16 *REG_FAN;
- const u16 *REG_FAN_MIN;
- const u16 *REG_FAN_START_OUTPUT;
- const u16 *REG_FAN_STOP_OUTPUT;
- const u16 *REG_FAN_STOP_TIME;
const u16 *REG_FAN_MAX_OUTPUT;
const u16 *REG_FAN_STEP_OUTPUT;
const u16 *scale_in;
- unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
- unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
-
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -457,7 +334,6 @@ struct w83627ehf_data {
u8 fan_div[5];
u8 has_fan; /* some fan inputs can be disabled */
u8 has_fan_min; /* some fans don't have min register */
- bool has_fan_div;
u8 temp_type[3];
s8 temp_offset[3];
s16 temp[9];
@@ -494,6 +370,7 @@ struct w83627ehf_data {
u16 have_temp_offset;
u8 in6_skip:1;
u8 temp3_val_only:1;
+ u8 have_vid:1;
#ifdef CONFIG_PM
/* Remember extra register values over suspend/resume */
@@ -584,35 +461,6 @@ static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg,
}
/* This function assumes that the caller holds data->update_lock */
-static void nct6775_write_fan_div(struct w83627ehf_data *data, int nr)
-{
- u8 reg;
-
- switch (nr) {
- case 0:
- reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x70)
- | (data->fan_div[0] & 0x7);
- w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg);
- break;
- case 1:
- reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x7)
- | ((data->fan_div[1] << 4) & 0x70);
- w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg);
- break;
- case 2:
- reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x70)
- | (data->fan_div[2] & 0x7);
- w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg);
- break;
- case 3:
- reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x7)
- | ((data->fan_div[3] << 4) & 0x70);
- w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg);
- break;
- }
-}
-
-/* This function assumes that the caller holds data->update_lock */
static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
{
u8 reg;
@@ -663,32 +511,6 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
}
}
-static void w83627ehf_write_fan_div_common(struct device *dev,
- struct w83627ehf_data *data, int nr)
-{
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
-
- if (sio_data->kind == nct6776)
- ; /* no dividers, do nothing */
- else if (sio_data->kind == nct6775)
- nct6775_write_fan_div(data, nr);
- else
- w83627ehf_write_fan_div(data, nr);
-}
-
-static void nct6775_update_fan_div(struct w83627ehf_data *data)
-{
- u8 i;
-
- i = w83627ehf_read_value(data, NCT6775_REG_FANDIV1);
- data->fan_div[0] = i & 0x7;
- data->fan_div[1] = (i & 0x70) >> 4;
- i = w83627ehf_read_value(data, NCT6775_REG_FANDIV2);
- data->fan_div[2] = i & 0x7;
- if (data->has_fan & (1<<3))
- data->fan_div[3] = (i & 0x70) >> 4;
-}
-
static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
{
int i;
@@ -714,37 +536,6 @@ static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
}
}
-static void w83627ehf_update_fan_div_common(struct device *dev,
- struct w83627ehf_data *data)
-{
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
-
- if (sio_data->kind == nct6776)
- ; /* no dividers, do nothing */
- else if (sio_data->kind == nct6775)
- nct6775_update_fan_div(data);
- else
- w83627ehf_update_fan_div(data);
-}
-
-static void nct6775_update_pwm(struct w83627ehf_data *data)
-{
- int i;
- int pwmcfg, fanmodecfg;
-
- for (i = 0; i < data->pwm_num; i++) {
- pwmcfg = w83627ehf_read_value(data,
- W83627EHF_REG_PWM_ENABLE[i]);
- fanmodecfg = w83627ehf_read_value(data,
- NCT6775_REG_FAN_MODE[i]);
- data->pwm_mode[i] =
- ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
- data->pwm_enable[i] = ((fanmodecfg >> 4) & 7) + 1;
- data->tolerance[i] = fanmodecfg & 0x0f;
- data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);
- }
-}
-
static void w83627ehf_update_pwm(struct w83627ehf_data *data)
{
int i;
@@ -765,28 +556,15 @@ static void w83627ehf_update_pwm(struct w83627ehf_data *data)
((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
& 3) + 1;
- data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);
+ data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]);
data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f;
}
}
-static void w83627ehf_update_pwm_common(struct device *dev,
- struct w83627ehf_data *data)
-{
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
-
- if (sio_data->kind == nct6775 || sio_data->kind == nct6776)
- nct6775_update_pwm(data);
- else
- w83627ehf_update_pwm(data);
-}
-
static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
{
struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
-
int i;
mutex_lock(&data->update_lock);
@@ -794,7 +572,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + HZ + HZ/2)
|| !data->valid) {
/* Fan clock dividers */
- w83627ehf_update_fan_div_common(dev, data);
+ w83627ehf_update_fan_div(data);
/* Measured voltages and limits */
for (i = 0; i < data->in_num; i++) {
@@ -816,40 +594,36 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
if (!(data->has_fan & (1 << i)))
continue;
- reg = w83627ehf_read_value(data, data->REG_FAN[i]);
- data->rpm[i] = data->fan_from_reg(reg,
- data->fan_div[i]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]);
+ data->rpm[i] = fan_from_reg8(reg, data->fan_div[i]);
if (data->has_fan_min & (1 << i))
data->fan_min[i] = w83627ehf_read_value(data,
- data->REG_FAN_MIN[i]);
+ W83627EHF_REG_FAN_MIN[i]);
/*
* If we failed to measure the fan speed and clock
* divider can be increased, let's try that for next
* time
*/
- if (data->has_fan_div
- && (reg >= 0xff || (sio_data->kind == nct6775
- && reg == 0x00))
- && data->fan_div[i] < 0x07) {
+ if (reg >= 0xff && data->fan_div[i] < 0x07) {
dev_dbg(dev,
"Increasing fan%d clock divider from %u to %u\n",
i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
- w83627ehf_write_fan_div_common(dev, data, i);
+ w83627ehf_write_fan_div(data, i);
/* Preserve min limit if possible */
if ((data->has_fan_min & (1 << i))
&& data->fan_min[i] >= 2
&& data->fan_min[i] != 255)
w83627ehf_write_value(data,
- data->REG_FAN_MIN[i],
+ W83627EHF_REG_FAN_MIN[i],
(data->fan_min[i] /= 2));
}
}
- w83627ehf_update_pwm_common(dev, data);
+ w83627ehf_update_pwm(data);
for (i = 0; i < data->pwm_num; i++) {
if (!(data->has_fan & (1 << i)))
@@ -857,13 +631,13 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
data->fan_start_output[i] =
w83627ehf_read_value(data,
- data->REG_FAN_START_OUTPUT[i]);
+ W83627EHF_REG_FAN_START_OUTPUT[i]);
data->fan_stop_output[i] =
w83627ehf_read_value(data,
- data->REG_FAN_STOP_OUTPUT[i]);
+ W83627EHF_REG_FAN_STOP_OUTPUT[i]);
data->fan_stop_time[i] =
w83627ehf_read_value(data,
- data->REG_FAN_STOP_TIME[i]);
+ W83627EHF_REG_FAN_STOP_TIME[i]);
if (data->REG_FAN_MAX_OUTPUT &&
data->REG_FAN_MAX_OUTPUT[i] != 0xff)
@@ -879,7 +653,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
data->target_temp[i] =
w83627ehf_read_value(data,
- data->REG_TARGET[i]) &
+ W83627EHF_REG_TARGET[i]) &
(data->pwm_mode[i] == 1 ? 0x7f : 0xff);
}
@@ -923,199 +697,61 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
return data;
}
-/*
- * Sysfs callback functions
- */
-#define show_in_reg(reg) \
-static ssize_t \
-show_##reg(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- struct w83627ehf_data *data = w83627ehf_update_device(dev); \
- struct sensor_device_attribute *sensor_attr = \
- to_sensor_dev_attr(attr); \
- int nr = sensor_attr->index; \
- return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr, \
- data->scale_in)); \
-}
-show_in_reg(in)
-show_in_reg(in_min)
-show_in_reg(in_max)
-
#define store_in_reg(REG, reg) \
-static ssize_t \
-store_in_##reg(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
+static int \
+store_in_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \
+ long val) \
{ \
- struct w83627ehf_data *data = dev_get_drvdata(dev); \
- struct sensor_device_attribute *sensor_attr = \
- to_sensor_dev_attr(attr); \
- int nr = sensor_attr->index; \
- unsigned long val; \
- int err; \
- err = kstrtoul(buf, 10, &val); \
- if (err < 0) \
- return err; \
+ if (val < 0) \
+ return -EINVAL; \
mutex_lock(&data->update_lock); \
- data->in_##reg[nr] = in_to_reg(val, nr, data->scale_in); \
- w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
- data->in_##reg[nr]); \
+ data->in_##reg[channel] = in_to_reg(val, channel, data->scale_in); \
+ w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(channel), \
+ data->in_##reg[channel]); \
mutex_unlock(&data->update_lock); \
- return count; \
+ return 0; \
}
store_in_reg(MIN, min)
store_in_reg(MAX, max)
-static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
- char *buf)
+static int
+store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel,
+ long val)
{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- return sprintf(buf, "%u\n", (data->alarms >> nr) & 0x01);
-}
-
-static struct sensor_device_attribute sda_in_input[] = {
- SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
- SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
- SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
- SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
- SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
- SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
- SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
- SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
- SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
- SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9),
-};
-
-static struct sensor_device_attribute sda_in_alarm[] = {
- SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0),
- SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1),
- SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2),
- SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3),
- SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8),
- SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 21),
- SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 20),
- SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16),
- SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17),
- SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 19),
-};
-
-static struct sensor_device_attribute sda_in_min[] = {
- SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
- SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
- SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
- SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
- SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
- SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
- SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
- SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
- SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
- SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9),
-};
-
-static struct sensor_device_attribute sda_in_max[] = {
- SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
- SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
- SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
- SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
- SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
- SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
- SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
- SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
- SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
- SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
-};
-
-static ssize_t
-show_fan(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- return sprintf(buf, "%d\n", data->rpm[nr]);
-}
-
-static ssize_t
-show_fan_min(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- return sprintf(buf, "%d\n",
- data->fan_from_reg_min(data->fan_min[nr],
- data->fan_div[nr]));
-}
-
-static ssize_t
-show_fan_div(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
-}
-
-static ssize_t
-store_fan_min(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- unsigned long val;
- int err;
unsigned int reg;
u8 new_div;
- err = kstrtoul(buf, 10, &val);
- if (err < 0)
- return err;
+ if (val < 0)
+ return -EINVAL;
mutex_lock(&data->update_lock);
- if (!data->has_fan_div) {
- /*
- * Only NCT6776F for now, so we know that this is a 13 bit
- * register
- */
- if (!val) {
- val = 0xff1f;
- } else {
- if (val > 1350000U)
- val = 135000U;
- val = 1350000U / val;
- val = (val & 0x1f) | ((val << 3) & 0xff00);
- }
- data->fan_min[nr] = val;
- goto done; /* Leave fan divider alone */
- }
if (!val) {
/* No min limit, alarm disabled */
- data->fan_min[nr] = 255;
- new_div = data->fan_div[nr]; /* No change */
- dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1);
+ data->fan_min[channel] = 255;
+ new_div = data->fan_div[channel]; /* No change */
+ dev_info(dev, "fan%u low limit and alarm disabled\n",
+ channel + 1);
} else if ((reg = 1350000U / val) >= 128 * 255) {
/*
* Speed below this value cannot possibly be represented,
* even with the highest divider (128)
*/
- data->fan_min[nr] = 254;
+ data->fan_min[channel] = 254;
new_div = 7; /* 128 == (1 << 7) */
dev_warn(dev,
"fan%u low limit %lu below minimum %u, set to minimum\n",
- nr + 1, val, data->fan_from_reg_min(254, 7));
+ channel + 1, val, fan_from_reg8(254, 7));
} else if (!reg) {
/*
* Speed above this value cannot possibly be represented,
* even with the lowest divider (1)
*/
- data->fan_min[nr] = 1;
+ data->fan_min[channel] = 1;
new_div = 0; /* 1 == (1 << 0) */
dev_warn(dev,
"fan%u low limit %lu above maximum %u, set to maximum\n",
- nr + 1, val, data->fan_from_reg_min(1, 0));
+ channel + 1, val, fan_from_reg8(1, 0));
} else {
/*
* Automatically pick the best divider, i.e. the one such
@@ -1127,362 +763,117 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
reg >>= 1;
new_div++;
}
- data->fan_min[nr] = reg;
+ data->fan_min[channel] = reg;
}
/*
* Write both the fan clock divider (if it changed) and the new
* fan min (unconditionally)
*/
- if (new_div != data->fan_div[nr]) {
+ if (new_div != data->fan_div[channel]) {
dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
- nr + 1, div_from_reg(data->fan_div[nr]),
+ channel + 1, div_from_reg(data->fan_div[channel]),
div_from_reg(new_div));
- data->fan_div[nr] = new_div;
- w83627ehf_write_fan_div_common(dev, data, nr);
+ data->fan_div[channel] = new_div;
+ w83627ehf_write_fan_div(data, channel);
/* Give the chip time to sample a new speed value */
data->last_updated = jiffies;
}
-done:
- w83627ehf_write_value(data, data->REG_FAN_MIN[nr],
- data->fan_min[nr]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static struct sensor_device_attribute sda_fan_input[] = {
- SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
- SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
- SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
- SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
- SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4),
-};
-
-static struct sensor_device_attribute sda_fan_alarm[] = {
- SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6),
- SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7),
- SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11),
- SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 10),
- SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 23),
-};
-
-static struct sensor_device_attribute sda_fan_min[] = {
- SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
- store_fan_min, 0),
- SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
- store_fan_min, 1),
- SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
- store_fan_min, 2),
- SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
- store_fan_min, 3),
- SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
- store_fan_min, 4),
-};
-
-static struct sensor_device_attribute sda_fan_div[] = {
- SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
- SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
- SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
- SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3),
- SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4),
-};
-
-static ssize_t
-show_temp_label(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]);
-}
+ w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[channel],
+ data->fan_min[channel]);
+ mutex_unlock(&data->update_lock);
-#define show_temp_reg(addr, reg) \
-static ssize_t \
-show_##reg(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- struct w83627ehf_data *data = w83627ehf_update_device(dev); \
- struct sensor_device_attribute *sensor_attr = \
- to_sensor_dev_attr(attr); \
- int nr = sensor_attr->index; \
- return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->reg[nr])); \
+ return 0;
}
-show_temp_reg(reg_temp, temp);
-show_temp_reg(reg_temp_over, temp_max);
-show_temp_reg(reg_temp_hyst, temp_max_hyst);
#define store_temp_reg(addr, reg) \
-static ssize_t \
-store_##reg(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
+static int \
+store_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \
+ long val) \
{ \
- struct w83627ehf_data *data = dev_get_drvdata(dev); \
- struct sensor_device_attribute *sensor_attr = \
- to_sensor_dev_attr(attr); \
- int nr = sensor_attr->index; \
- int err; \
- long val; \
- err = kstrtol(buf, 10, &val); \
- if (err < 0) \
- return err; \
mutex_lock(&data->update_lock); \
- data->reg[nr] = LM75_TEMP_TO_REG(val); \
- w83627ehf_write_temp(data, data->addr[nr], data->reg[nr]); \
+ data->reg[channel] = LM75_TEMP_TO_REG(val); \
+ w83627ehf_write_temp(data, data->addr[channel], data->reg[channel]); \
mutex_unlock(&data->update_lock); \
- return count; \
+ return 0; \
}
store_temp_reg(reg_temp_over, temp_max);
store_temp_reg(reg_temp_hyst, temp_max_hyst);
-static ssize_t
-show_temp_offset(struct device *dev, struct device_attribute *attr, char *buf)
+static int
+store_temp_offset(struct device *dev, struct w83627ehf_data *data, int channel,
+ long val)
{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
-
- return sprintf(buf, "%d\n",
- data->temp_offset[sensor_attr->index] * 1000);
-}
-
-static ssize_t
-store_temp_offset(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- long val;
- int err;
-
- err = kstrtol(buf, 10, &val);
- if (err < 0)
- return err;
-
val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
mutex_lock(&data->update_lock);
- data->temp_offset[nr] = val;
- w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[nr], val);
+ data->temp_offset[channel] = val;
+ w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[channel], val);
mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t
-show_temp_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- return sprintf(buf, "%d\n", (int)data->temp_type[nr]);
-}
-
-static struct sensor_device_attribute sda_temp_input[] = {
- SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
- SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
- SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
- SENSOR_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3),
- SENSOR_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4),
- SENSOR_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5),
- SENSOR_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6),
- SENSOR_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7),
- SENSOR_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8),
-};
-
-static struct sensor_device_attribute sda_temp_label[] = {
- SENSOR_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0),
- SENSOR_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1),
- SENSOR_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2),
- SENSOR_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3),
- SENSOR_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4),
- SENSOR_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5),
- SENSOR_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6),
- SENSOR_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7),
- SENSOR_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8),
-};
-
-static struct sensor_device_attribute sda_temp_max[] = {
- SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 0),
- SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 1),
- SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 2),
- SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 3),
- SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 4),
- SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 5),
- SENSOR_ATTR(temp7_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 6),
- SENSOR_ATTR(temp8_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 7),
- SENSOR_ATTR(temp9_max, S_IRUGO | S_IWUSR, show_temp_max,
- store_temp_max, 8),
-};
-
-static struct sensor_device_attribute sda_temp_max_hyst[] = {
- SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 0),
- SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 1),
- SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 2),
- SENSOR_ATTR(temp4_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 3),
- SENSOR_ATTR(temp5_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 4),
- SENSOR_ATTR(temp6_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 5),
- SENSOR_ATTR(temp7_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 6),
- SENSOR_ATTR(temp8_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 7),
- SENSOR_ATTR(temp9_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
- store_temp_max_hyst, 8),
-};
-
-static struct sensor_device_attribute sda_temp_alarm[] = {
- SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4),
- SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5),
- SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13),
-};
-
-static struct sensor_device_attribute sda_temp_type[] = {
- SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
- SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
- SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
-};
-
-static struct sensor_device_attribute sda_temp_offset[] = {
- SENSOR_ATTR(temp1_offset, S_IRUGO | S_IWUSR, show_temp_offset,
- store_temp_offset, 0),
- SENSOR_ATTR(temp2_offset, S_IRUGO | S_IWUSR, show_temp_offset,
- store_temp_offset, 1),
- SENSOR_ATTR(temp3_offset, S_IRUGO | S_IWUSR, show_temp_offset,
- store_temp_offset, 2),
-};
-
-#define show_pwm_reg(reg) \
-static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- struct w83627ehf_data *data = w83627ehf_update_device(dev); \
- struct sensor_device_attribute *sensor_attr = \
- to_sensor_dev_attr(attr); \
- int nr = sensor_attr->index; \
- return sprintf(buf, "%d\n", data->reg[nr]); \
+ return 0;
}
-show_pwm_reg(pwm_mode)
-show_pwm_reg(pwm_enable)
-show_pwm_reg(pwm)
-
-static ssize_t
-store_pwm_mode(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static int
+store_pwm_mode(struct device *dev, struct w83627ehf_data *data, int channel,
+ long val)
{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
- int nr = sensor_attr->index;
- unsigned long val;
- int err;
u16 reg;
- err = kstrtoul(buf, 10, &val);
- if (err < 0)
- return err;
-
- if (val > 1)
- return -EINVAL;
-
- /* On NCT67766F, DC mode is only supported for pwm1 */
- if (sio_data->kind == nct6776 && nr && val != 1)
+ if (val < 0 || val > 1)
return -EINVAL;
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
- data->pwm_mode[nr] = val;
- reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[channel]);
+ data->pwm_mode[channel] = val;
+ reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[channel]);
if (!val)
- reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr];
- w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
+ reg |= 1 << W83627EHF_PWM_MODE_SHIFT[channel];
+ w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], reg);
mutex_unlock(&data->update_lock);
- return count;
+ return 0;
}
-static ssize_t
-store_pwm(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static int
+store_pwm(struct device *dev, struct w83627ehf_data *data, int channel,
+ long val)
{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- unsigned long val;
- int err;
-
- err = kstrtoul(buf, 10, &val);
- if (err < 0)
- return err;
-
val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
- data->pwm[nr] = val;
- w83627ehf_write_value(data, data->REG_PWM[nr], val);
+ data->pwm[channel] = val;
+ w83627ehf_write_value(data, W83627EHF_REG_PWM[channel], val);
mutex_unlock(&data->update_lock);
- return count;
+ return 0;
}
-static ssize_t
-store_pwm_enable(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static int
+store_pwm_enable(struct device *dev, struct w83627ehf_data *data, int channel,
+ long val)
{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- unsigned long val;
- int err;
u16 reg;
- err = kstrtoul(buf, 10, &val);
- if (err < 0)
- return err;
-
- if (!val || (val > 4 && val != data->pwm_enable_orig[nr]))
- return -EINVAL;
- /* SmartFan III mode is not supported on NCT6776F */
- if (sio_data->kind == nct6776 && val == 4)
+ if (!val || val < 0 ||
+ (val > 4 && val != data->pwm_enable_orig[channel]))
return -EINVAL;
mutex_lock(&data->update_lock);
- data->pwm_enable[nr] = val;
- if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
- reg = w83627ehf_read_value(data,
- NCT6775_REG_FAN_MODE[nr]);
- reg &= 0x0f;
- reg |= (val - 1) << 4;
- w83627ehf_write_value(data,
- NCT6775_REG_FAN_MODE[nr], reg);
- } else {
- reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
- reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
- reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
- w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
- }
+ data->pwm_enable[channel] = val;
+ reg = w83627ehf_read_value(data,
+ W83627EHF_REG_PWM_ENABLE[channel]);
+ reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]);
+ reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel];
+ w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel],
+ reg);
mutex_unlock(&data->update_lock);
- return count;
+ return 0;
}
-
#define show_tol_temp(reg) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
- struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \
struct sensor_device_attribute *sensor_attr = \
to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
@@ -1510,7 +901,7 @@ store_target_temp(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->update_lock);
data->target_temp[nr] = val;
- w83627ehf_write_value(data, data->REG_TARGET[nr], val);
+ w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val);
mutex_unlock(&data->update_lock);
return count;
}
@@ -1520,7 +911,6 @@ store_tolerance(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u16 reg;
@@ -1535,76 +925,34 @@ store_tolerance(struct device *dev, struct device_attribute *attr,
val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15);
mutex_lock(&data->update_lock);
- if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
- /* Limit tolerance further for NCT6776F */
- if (sio_data->kind == nct6776 && val > 7)
- val = 7;
- reg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
+ if (nr == 1)
+ reg = (reg & 0x0f) | (val << 4);
+ else
reg = (reg & 0xf0) | val;
- w83627ehf_write_value(data, NCT6775_REG_FAN_MODE[nr], reg);
- } else {
- reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
- if (nr == 1)
- reg = (reg & 0x0f) | (val << 4);
- else
- reg = (reg & 0xf0) | val;
- w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
- }
+ w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
data->tolerance[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute sda_pwm[] = {
- SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0),
- SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
- SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2),
- SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3),
-};
-
-static struct sensor_device_attribute sda_pwm_mode[] = {
- SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
- store_pwm_mode, 0),
- SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
- store_pwm_mode, 1),
- SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
- store_pwm_mode, 2),
- SENSOR_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
- store_pwm_mode, 3),
-};
-
-static struct sensor_device_attribute sda_pwm_enable[] = {
- SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
- store_pwm_enable, 0),
- SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
- store_pwm_enable, 1),
- SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
- store_pwm_enable, 2),
- SENSOR_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
- store_pwm_enable, 3),
-};
-
-static struct sensor_device_attribute sda_target_temp[] = {
- SENSOR_ATTR(pwm1_target, S_IWUSR | S_IRUGO, show_target_temp,
- store_target_temp, 0),
- SENSOR_ATTR(pwm2_target, S_IWUSR | S_IRUGO, show_target_temp,
- store_target_temp, 1),
- SENSOR_ATTR(pwm3_target, S_IWUSR | S_IRUGO, show_target_temp,
- store_target_temp, 2),
- SENSOR_ATTR(pwm4_target, S_IWUSR | S_IRUGO, show_target_temp,
- store_target_temp, 3),
-};
-
-static struct sensor_device_attribute sda_tolerance[] = {
- SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
- store_tolerance, 0),
- SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
- store_tolerance, 1),
- SENSOR_ATTR(pwm3_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
- store_tolerance, 2),
- SENSOR_ATTR(pwm4_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
- store_tolerance, 3),
-};
+static SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp,
+ store_target_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp,
+ store_target_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp,
+ store_target_temp, 2);
+static SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp,
+ store_target_temp, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance,
+ store_tolerance, 0);
+static SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance,
+ store_tolerance, 1);
+static SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance,
+ store_tolerance, 2);
+static SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance,
+ store_tolerance, 3);
/* Smart Fan registers */
@@ -1612,7 +960,7 @@ static struct sensor_device_attribute sda_tolerance[] = {
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
- struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \
struct sensor_device_attribute *sensor_attr = \
to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
@@ -1634,21 +982,21 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
val = clamp_val(val, 1, 255); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(data, data->REG_##REG[nr], val); \
+ w83627ehf_write_value(data, REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
}
-fan_functions(fan_start_output, FAN_START_OUTPUT)
-fan_functions(fan_stop_output, FAN_STOP_OUTPUT)
-fan_functions(fan_max_output, FAN_MAX_OUTPUT)
-fan_functions(fan_step_output, FAN_STEP_OUTPUT)
+fan_functions(fan_start_output, W83627EHF_REG_FAN_START_OUTPUT)
+fan_functions(fan_stop_output, W83627EHF_REG_FAN_STOP_OUTPUT)
+fan_functions(fan_max_output, data->REG_FAN_MAX_OUTPUT)
+fan_functions(fan_step_output, data->REG_FAN_STEP_OUTPUT)
#define fan_time_functions(reg, REG) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
- struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \
struct sensor_device_attribute *sensor_attr = \
to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
@@ -1673,78 +1021,61 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
val = step_time_to_reg(val, data->pwm_mode[nr]); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(data, data->REG_##REG[nr], val); \
+ w83627ehf_write_value(data, REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
} \
-fan_time_functions(fan_stop_time, FAN_STOP_TIME)
-
-static ssize_t name_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
-
- return sprintf(buf, "%s\n", data->name);
-}
-static DEVICE_ATTR_RO(name);
-
-static struct sensor_device_attribute sda_sf3_arrays_fan4[] = {
- SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
- store_fan_stop_time, 3),
- SENSOR_ATTR(pwm4_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
- store_fan_start_output, 3),
- SENSOR_ATTR(pwm4_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
- store_fan_stop_output, 3),
- SENSOR_ATTR(pwm4_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
- store_fan_max_output, 3),
- SENSOR_ATTR(pwm4_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
- store_fan_step_output, 3),
-};
-
-static struct sensor_device_attribute sda_sf3_arrays_fan3[] = {
- SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
- store_fan_stop_time, 2),
- SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
- store_fan_start_output, 2),
- SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
- store_fan_stop_output, 2),
-};
-
-static struct sensor_device_attribute sda_sf3_arrays[] = {
- SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
- store_fan_stop_time, 0),
- SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
- store_fan_stop_time, 1),
- SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
- store_fan_start_output, 0),
- SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
- store_fan_start_output, 1),
- SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
- store_fan_stop_output, 0),
- SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
- store_fan_stop_output, 1),
-};
+fan_time_functions(fan_stop_time, W83627EHF_REG_FAN_STOP_TIME)
+
+static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time,
+ store_fan_stop_time, 3);
+static SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output,
+ store_fan_start_output, 3);
+static SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output,
+ store_fan_stop_output, 3);
+static SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output,
+ store_fan_max_output, 3);
+static SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output,
+ store_fan_step_output, 3);
+
+static SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time,
+ store_fan_stop_time, 2);
+static SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output,
+ store_fan_start_output, 2);
+static SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output,
+ store_fan_stop_output, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time,
+ store_fan_stop_time, 0);
+static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time,
+ store_fan_stop_time, 1);
+static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output,
+ store_fan_start_output, 0);
+static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output,
+ store_fan_start_output, 1);
+static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output,
+ store_fan_stop_output, 0);
+static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output,
+ store_fan_stop_output, 1);
/*
* pwm1 and pwm3 don't support max and step settings on all chips.
* Need to check support while generating/removing attribute files.
*/
-static struct sensor_device_attribute sda_sf3_max_step_arrays[] = {
- SENSOR_ATTR(pwm1_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
- store_fan_max_output, 0),
- SENSOR_ATTR(pwm1_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
- store_fan_step_output, 0),
- SENSOR_ATTR(pwm2_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
- store_fan_max_output, 1),
- SENSOR_ATTR(pwm2_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
- store_fan_step_output, 1),
- SENSOR_ATTR(pwm3_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
- store_fan_max_output, 2),
- SENSOR_ATTR(pwm3_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
- store_fan_step_output, 2),
-};
+static SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output,
+ store_fan_max_output, 0);
+static SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output,
+ store_fan_step_output, 0);
+static SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output,
+ store_fan_max_output, 1);
+static SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output,
+ store_fan_step_output, 1);
+static SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output,
+ store_fan_max_output, 2);
+static SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output,
+ store_fan_step_output, 2);
static ssize_t
cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1752,33 +1083,20 @@ cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
struct w83627ehf_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
-static DEVICE_ATTR_RO(cpu0_vid);
+DEVICE_ATTR_RO(cpu0_vid);
/* Case open detection */
-
-static ssize_t
-show_caseopen(struct device *dev, struct device_attribute *attr, char *buf)
+static int
+clear_caseopen(struct device *dev, struct w83627ehf_data *data, int channel,
+ long val)
{
- struct w83627ehf_data *data = w83627ehf_update_device(dev);
-
- return sprintf(buf, "%d\n",
- !!(data->caseopen & to_sensor_dev_attr_2(attr)->index));
-}
-
-static ssize_t
-clear_caseopen(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct w83627ehf_data *data = dev_get_drvdata(dev);
- unsigned long val;
- u16 reg, mask;
+ const u16 mask = 0x80;
+ u16 reg;
- if (kstrtoul(buf, 10, &val) || val != 0)
+ if (val != 0 || channel != 0)
return -EINVAL;
- mask = to_sensor_dev_attr_2(attr)->nr;
-
mutex_lock(&data->update_lock);
reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask);
@@ -1786,85 +1104,116 @@ clear_caseopen(struct device *dev, struct device_attribute *attr,
data->valid = 0; /* Force cache refresh */
mutex_unlock(&data->update_lock);
- return count;
+ return 0;
}
-static struct sensor_device_attribute_2 sda_caseopen[] = {
- SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen,
- clear_caseopen, 0x80, 0x10),
- SENSOR_ATTR_2(intrusion1_alarm, S_IWUSR | S_IRUGO, show_caseopen,
- clear_caseopen, 0x40, 0x40),
-};
-
-/*
- * Driver and device management
- */
-
-static void w83627ehf_device_remove_files(struct device *dev)
+static umode_t w83627ehf_attrs_visible(struct kobject *kobj,
+ struct attribute *a, int n)
{
- /*
- * some entries in the following arrays may not have been used in
- * device_create_file(), but device_remove_file() will ignore them
- */
- int i;
+ struct device *dev = container_of(kobj, struct device, kobj);
struct w83627ehf_data *data = dev_get_drvdata(dev);
+ struct device_attribute *devattr;
+ struct sensor_device_attribute *sda;
+
+ devattr = container_of(a, struct device_attribute, attr);
+
+ /* Not sensor */
+ if (devattr->show == cpu0_vid_show && data->have_vid)
+ return a->mode;
+
+ sda = (struct sensor_device_attribute *)devattr;
+
+ if (sda->index < 2 &&
+ (devattr->show == show_fan_stop_time ||
+ devattr->show == show_fan_start_output ||
+ devattr->show == show_fan_stop_output))
+ return a->mode;
+
+ if (sda->index < 3 &&
+ (devattr->show == show_fan_max_output ||
+ devattr->show == show_fan_step_output) &&
+ data->REG_FAN_STEP_OUTPUT &&
+ data->REG_FAN_STEP_OUTPUT[sda->index] != 0xff)
+ return a->mode;
+
+ /* if fan3 and fan4 are enabled create the files for them */
+ if (sda->index == 2 &&
+ (data->has_fan & (1 << 2)) && data->pwm_num >= 3 &&
+ (devattr->show == show_fan_stop_time ||
+ devattr->show == show_fan_start_output ||
+ devattr->show == show_fan_stop_output))
+ return a->mode;
+
+ if (sda->index == 3 &&
+ (data->has_fan & (1 << 3)) && data->pwm_num >= 4 &&
+ (devattr->show == show_fan_stop_time ||
+ devattr->show == show_fan_start_output ||
+ devattr->show == show_fan_stop_output ||
+ devattr->show == show_fan_max_output ||
+ devattr->show == show_fan_step_output))
+ return a->mode;
+
+ if ((devattr->show == show_target_temp ||
+ devattr->show == show_tolerance) &&
+ (data->has_fan & (1 << sda->index)) &&
+ sda->index < data->pwm_num)
+ return a->mode;
- for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
- device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
- for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
- struct sensor_device_attribute *attr =
- &sda_sf3_max_step_arrays[i];
- if (data->REG_FAN_STEP_OUTPUT &&
- data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
- device_remove_file(dev, &attr->dev_attr);
- }
- for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++)
- device_remove_file(dev, &sda_sf3_arrays_fan3[i].dev_attr);
- for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
- device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
- for (i = 0; i < data->in_num; i++) {
- if ((i == 6) && data->in6_skip)
- continue;
- device_remove_file(dev, &sda_in_input[i].dev_attr);
- device_remove_file(dev, &sda_in_alarm[i].dev_attr);
- device_remove_file(dev, &sda_in_min[i].dev_attr);
- device_remove_file(dev, &sda_in_max[i].dev_attr);
- }
- for (i = 0; i < 5; i++) {
- device_remove_file(dev, &sda_fan_input[i].dev_attr);
- device_remove_file(dev, &sda_fan_alarm[i].dev_attr);
- device_remove_file(dev, &sda_fan_div[i].dev_attr);
- device_remove_file(dev, &sda_fan_min[i].dev_attr);
- }
- for (i = 0; i < data->pwm_num; i++) {
- device_remove_file(dev, &sda_pwm[i].dev_attr);
- device_remove_file(dev, &sda_pwm_mode[i].dev_attr);
- device_remove_file(dev, &sda_pwm_enable[i].dev_attr);
- device_remove_file(dev, &sda_target_temp[i].dev_attr);
- device_remove_file(dev, &sda_tolerance[i].dev_attr);
- }
- for (i = 0; i < NUM_REG_TEMP; i++) {
- if (!(data->have_temp & (1 << i)))
- continue;
- device_remove_file(dev, &sda_temp_input[i].dev_attr);
- device_remove_file(dev, &sda_temp_label[i].dev_attr);
- if (i == 2 && data->temp3_val_only)
- continue;
- device_remove_file(dev, &sda_temp_max[i].dev_attr);
- device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
- if (i > 2)
- continue;
- device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
- device_remove_file(dev, &sda_temp_type[i].dev_attr);
- device_remove_file(dev, &sda_temp_offset[i].dev_attr);
- }
+ return 0;
+}
+
+/* These groups handle non-standard attributes used in this device */
+static struct attribute *w83627ehf_attrs[] = {
+
+ &sensor_dev_attr_pwm1_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm1_start_output.dev_attr.attr,
+ &sensor_dev_attr_pwm1_stop_output.dev_attr.attr,
+ &sensor_dev_attr_pwm1_max_output.dev_attr.attr,
+ &sensor_dev_attr_pwm1_step_output.dev_attr.attr,
+ &sensor_dev_attr_pwm1_target.dev_attr.attr,
+ &sensor_dev_attr_pwm1_tolerance.dev_attr.attr,
+
+ &sensor_dev_attr_pwm2_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm2_start_output.dev_attr.attr,
+ &sensor_dev_attr_pwm2_stop_output.dev_attr.attr,
+ &sensor_dev_attr_pwm2_max_output.dev_attr.attr,
+ &sensor_dev_attr_pwm2_step_output.dev_attr.attr,
+ &sensor_dev_attr_pwm2_target.dev_attr.attr,
+ &sensor_dev_attr_pwm2_tolerance.dev_attr.attr,
+
+ &sensor_dev_attr_pwm3_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm3_start_output.dev_attr.attr,
+ &sensor_dev_attr_pwm3_stop_output.dev_attr.attr,
+ &sensor_dev_attr_pwm3_max_output.dev_attr.attr,
+ &sensor_dev_attr_pwm3_step_output.dev_attr.attr,
+ &sensor_dev_attr_pwm3_target.dev_attr.attr,
+ &sensor_dev_attr_pwm3_tolerance.dev_attr.attr,
+
+ &sensor_dev_attr_pwm4_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm4_start_output.dev_attr.attr,
+ &sensor_dev_attr_pwm4_stop_output.dev_attr.attr,
+ &sensor_dev_attr_pwm4_max_output.dev_attr.attr,
+ &sensor_dev_attr_pwm4_step_output.dev_attr.attr,
+ &sensor_dev_attr_pwm4_target.dev_attr.attr,
+ &sensor_dev_attr_pwm4_tolerance.dev_attr.attr,
+
+ &dev_attr_cpu0_vid.attr,
+ NULL
+};
- device_remove_file(dev, &sda_caseopen[0].dev_attr);
- device_remove_file(dev, &sda_caseopen[1].dev_attr);
+static const struct attribute_group w83627ehf_group = {
+ .attrs = w83627ehf_attrs,
+ .is_visible = w83627ehf_attrs_visible,
+};
- device_remove_file(dev, &dev_attr_name);
- device_remove_file(dev, &dev_attr_cpu0_vid);
-}
+static const struct attribute_group *w83627ehf_groups[] = {
+ &w83627ehf_group,
+ NULL
+};
+
+/*
+ * Driver and device management
+ */
/* Get the monitoring functions started */
static inline void w83627ehf_init_device(struct w83627ehf_data *data,
@@ -1927,16 +1276,6 @@ static inline void w83627ehf_init_device(struct w83627ehf_data *data,
}
}
-static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
- int r1, int r2)
-{
- swap(data->temp_src[r1], data->temp_src[r2]);
- swap(data->reg_temp[r1], data->reg_temp[r2]);
- swap(data->reg_temp_over[r1], data->reg_temp_over[r2]);
- swap(data->reg_temp_hyst[r1], data->reg_temp_hyst[r2]);
- swap(data->reg_temp_config[r1], data->reg_temp_config[r2]);
-}
-
static void
w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp)
{
@@ -1954,7 +1293,7 @@ static void
w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
struct w83627ehf_data *data)
{
- int fan3pin, fan4pin, fan4min, fan5pin, regval;
+ int fan3pin, fan4pin, fan5pin, regval;
/* The W83627UHG is simple, only two fan inputs, no config */
if (sio_data->kind == w83627uhg) {
@@ -1964,77 +1303,392 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
}
/* fan4 and fan5 share some pins with the GPIO and serial flash */
- if (sio_data->kind == nct6775) {
- /* On NCT6775, fan4 shares pins with the fdc interface */
- fan3pin = 1;
- fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
- fan4min = 0;
- fan5pin = 0;
- } else if (sio_data->kind == nct6776) {
- bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80;
-
- superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
- regval = superio_inb(sio_data->sioreg, SIO_REG_ENABLE);
-
- if (regval & 0x80)
- fan3pin = gpok;
- else
- fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
-
- if (regval & 0x40)
- fan4pin = gpok;
- else
- fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
-
- if (regval & 0x20)
- fan5pin = gpok;
- else
- fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
-
- fan4min = fan4pin;
- } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
+ if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
fan3pin = 1;
fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
- fan4min = fan4pin;
} else {
fan3pin = 1;
fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
- fan4min = fan4pin;
}
data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
data->has_fan |= (fan3pin << 2);
data->has_fan_min |= (fan3pin << 2);
- if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
- /*
- * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1
- * register
- */
- data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
- data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
- } else {
- /*
- * It looks like fan4 and fan5 pins can be alternatively used
- * as fan on/off switches, but fan5 control is write only :/
- * We assume that if the serial interface is disabled, designers
- * connected fan5 as input unless they are emitting log 1, which
- * is not the default.
- */
- regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
- if ((regval & (1 << 2)) && fan4pin) {
- data->has_fan |= (1 << 3);
- data->has_fan_min |= (1 << 3);
+ /*
+ * It looks like fan4 and fan5 pins can be alternatively used
+ * as fan on/off switches, but fan5 control is write only :/
+ * We assume that if the serial interface is disabled, designers
+ * connected fan5 as input unless they are emitting log 1, which
+ * is not the default.
+ */
+ regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+ if ((regval & (1 << 2)) && fan4pin) {
+ data->has_fan |= (1 << 3);
+ data->has_fan_min |= (1 << 3);
+ }
+ if (!(regval & (1 << 1)) && fan5pin) {
+ data->has_fan |= (1 << 4);
+ data->has_fan_min |= (1 << 4);
+ }
+}
+
+static umode_t
+w83627ehf_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct w83627ehf_data *data = drvdata;
+
+ switch (type) {
+ case hwmon_temp:
+ /* channel 0.., name 1.. */
+ if (!(data->have_temp & (1 << channel)))
+ return 0;
+ if (attr == hwmon_temp_input || attr == hwmon_temp_label)
+ return 0444;
+ if (channel == 2 && data->temp3_val_only)
+ return 0;
+ if (attr == hwmon_temp_max) {
+ if (data->reg_temp_over[channel])
+ return 0644;
+ else
+ return 0;
+ }
+ if (attr == hwmon_temp_max_hyst) {
+ if (data->reg_temp_hyst[channel])
+ return 0644;
+ else
+ return 0;
+ }
+ if (channel > 2)
+ return 0;
+ if (attr == hwmon_temp_alarm || attr == hwmon_temp_type)
+ return 0444;
+ if (attr == hwmon_temp_offset) {
+ if (data->have_temp_offset & (1 << channel))
+ return 0644;
+ else
+ return 0;
+ }
+ break;
+
+ case hwmon_fan:
+ /* channel 0.., name 1.. */
+ if (!(data->has_fan & (1 << channel)))
+ return 0;
+ if (attr == hwmon_fan_input || attr == hwmon_fan_alarm)
+ return 0444;
+ if (attr == hwmon_fan_div) {
+ return 0444;
}
- if (!(regval & (1 << 1)) && fan5pin) {
- data->has_fan |= (1 << 4);
- data->has_fan_min |= (1 << 4);
+ if (attr == hwmon_fan_min) {
+ if (data->has_fan_min & (1 << channel))
+ return 0644;
+ else
+ return 0;
}
+ break;
+
+ case hwmon_in:
+ /* channel 0.., name 0.. */
+ if (channel >= data->in_num)
+ return 0;
+ if (channel == 6 && data->in6_skip)
+ return 0;
+ if (attr == hwmon_in_alarm || attr == hwmon_in_input)
+ return 0444;
+ if (attr == hwmon_in_min || attr == hwmon_in_max)
+ return 0644;
+ break;
+
+ case hwmon_pwm:
+ /* channel 0.., name 1.. */
+ if (!(data->has_fan & (1 << channel)) ||
+ channel >= data->pwm_num)
+ return 0;
+ if (attr == hwmon_pwm_mode || attr == hwmon_pwm_enable ||
+ attr == hwmon_pwm_input)
+ return 0644;
+ break;
+
+ case hwmon_intrusion:
+ return 0644;
+
+ default: /* Shouldn't happen */
+ return 0;
}
+
+ return 0; /* Shouldn't happen */
}
+static int
+w83627ehf_do_read_temp(struct w83627ehf_data *data, u32 attr,
+ int channel, long *val)
+{
+ switch (attr) {
+ case hwmon_temp_input:
+ *val = LM75_TEMP_FROM_REG(data->temp[channel]);
+ return 0;
+ case hwmon_temp_max:
+ *val = LM75_TEMP_FROM_REG(data->temp_max[channel]);
+ return 0;
+ case hwmon_temp_max_hyst:
+ *val = LM75_TEMP_FROM_REG(data->temp_max_hyst[channel]);
+ return 0;
+ case hwmon_temp_offset:
+ *val = data->temp_offset[channel] * 1000;
+ return 0;
+ case hwmon_temp_type:
+ *val = (int)data->temp_type[channel];
+ return 0;
+ case hwmon_temp_alarm:
+ if (channel < 3) {
+ int bit[] = { 4, 5, 13 };
+ *val = (data->alarms >> bit[channel]) & 1;
+ return 0;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int
+w83627ehf_do_read_in(struct w83627ehf_data *data, u32 attr,
+ int channel, long *val)
+{
+ switch (attr) {
+ case hwmon_in_input:
+ *val = in_from_reg(data->in[channel], channel, data->scale_in);
+ return 0;
+ case hwmon_in_min:
+ *val = in_from_reg(data->in_min[channel], channel,
+ data->scale_in);
+ return 0;
+ case hwmon_in_max:
+ *val = in_from_reg(data->in_max[channel], channel,
+ data->scale_in);
+ return 0;
+ case hwmon_in_alarm:
+ if (channel < 10) {
+ int bit[] = { 0, 1, 2, 3, 8, 21, 20, 16, 17, 19 };
+ *val = (data->alarms >> bit[channel]) & 1;
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+ return -EOPNOTSUPP;
+}
+
+static int
+w83627ehf_do_read_fan(struct w83627ehf_data *data, u32 attr,
+ int channel, long *val)
+{
+ switch (attr) {
+ case hwmon_fan_input:
+ *val = data->rpm[channel];
+ return 0;
+ case hwmon_fan_min:
+ *val = fan_from_reg8(data->fan_min[channel],
+ data->fan_div[channel]);
+ return 0;
+ case hwmon_fan_div:
+ *val = div_from_reg(data->fan_div[channel]);
+ return 0;
+ case hwmon_fan_alarm:
+ if (channel < 5) {
+ int bit[] = { 6, 7, 11, 10, 23 };
+ *val = (data->alarms >> bit[channel]) & 1;
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+ return -EOPNOTSUPP;
+}
+
+static int
+w83627ehf_do_read_pwm(struct w83627ehf_data *data, u32 attr,
+ int channel, long *val)
+{
+ switch (attr) {
+ case hwmon_pwm_input:
+ *val = data->pwm[channel];
+ return 0;
+ case hwmon_pwm_enable:
+ *val = data->pwm_enable[channel];
+ return 0;
+ case hwmon_pwm_mode:
+ *val = data->pwm_enable[channel];
+ return 0;
+ default:
+ break;
+ }
+ return -EOPNOTSUPP;
+}
+
+static int
+w83627ehf_do_read_intrusion(struct w83627ehf_data *data, u32 attr,
+ int channel, long *val)
+{
+ if (attr != hwmon_intrusion_alarm || channel != 0)
+ return -EOPNOTSUPP; /* shouldn't happen */
+
+ *val = !!(data->caseopen & 0x10);
+ return 0;
+}
+
+static int
+w83627ehf_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct w83627ehf_data *data = w83627ehf_update_device(dev->parent);
+
+ switch (type) {
+ case hwmon_fan:
+ return w83627ehf_do_read_fan(data, attr, channel, val);
+
+ case hwmon_in:
+ return w83627ehf_do_read_in(data, attr, channel, val);
+
+ case hwmon_pwm:
+ return w83627ehf_do_read_pwm(data, attr, channel, val);
+
+ case hwmon_temp:
+ return w83627ehf_do_read_temp(data, attr, channel, val);
+
+ case hwmon_intrusion:
+ return w83627ehf_do_read_intrusion(data, attr, channel, val);
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int
+w83627ehf_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ if (attr == hwmon_temp_label) {
+ *str = data->temp_label[data->temp_src[channel]];
+ return 0;
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Nothing else should be read as a string */
+ return -EOPNOTSUPP;
+}
+
+static int
+w83627ehf_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
+
+ if (type == hwmon_in && attr == hwmon_in_min)
+ return store_in_min(dev, data, channel, val);
+ if (type == hwmon_in && attr == hwmon_in_max)
+ return store_in_max(dev, data, channel, val);
+
+ if (type == hwmon_fan && attr == hwmon_fan_min)
+ return store_fan_min(dev, data, channel, val);
+
+ if (type == hwmon_temp && attr == hwmon_temp_max)
+ return store_temp_max(dev, data, channel, val);
+ if (type == hwmon_temp && attr == hwmon_temp_max_hyst)
+ return store_temp_max_hyst(dev, data, channel, val);
+ if (type == hwmon_temp && attr == hwmon_temp_offset)
+ return store_temp_offset(dev, data, channel, val);
+
+ if (type == hwmon_pwm && attr == hwmon_pwm_mode)
+ return store_pwm_mode(dev, data, channel, val);
+ if (type == hwmon_pwm && attr == hwmon_pwm_enable)
+ return store_pwm_enable(dev, data, channel, val);
+ if (type == hwmon_pwm && attr == hwmon_pwm_input)
+ return store_pwm(dev, data, channel, val);
+
+ if (type == hwmon_intrusion && attr == hwmon_intrusion_alarm)
+ return clear_caseopen(dev, data, channel, val);
+
+ return -EOPNOTSUPP;
+}
+
+static const struct hwmon_ops w83627ehf_ops = {
+ .is_visible = w83627ehf_is_visible,
+ .read = w83627ehf_read,
+ .read_string = w83627ehf_read_string,
+ .write = w83627ehf_write,
+};
+
+static const struct hwmon_channel_info *w83627ehf_info[] = {
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
+ HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
+ HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
+ HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
+ HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
+ HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN),
+ HWMON_CHANNEL_INFO(pwm,
+ HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE,
+ HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE,
+ HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE,
+ HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
+ HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
+ HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE),
+ HWMON_CHANNEL_INFO(intrusion,
+ HWMON_INTRUSION_ALARM),
+ NULL
+};
+
+static const struct hwmon_chip_info w83627ehf_chip_info = {
+ .ops = &w83627ehf_ops,
+ .info = w83627ehf_info,
+};
+
static int w83627ehf_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -2043,6 +1697,7 @@ static int w83627ehf_probe(struct platform_device *pdev)
struct resource *res;
u8 en_vrm10;
int i, err = 0;
+ struct device *hwmon_dev;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) {
@@ -2069,15 +1724,13 @@ static int w83627ehf_probe(struct platform_device *pdev)
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
- /* 667HG, NCT6775F, and NCT6776F have 3 pwms, and 627UHG has only 2 */
+ /* 667HG has 3 pwms, and 627UHG has only 2 */
switch (sio_data->kind) {
default:
data->pwm_num = 4;
break;
case w83667hg:
case w83667hg_b:
- case nct6775:
- case nct6776:
data->pwm_num = 3;
break;
case w83627uhg:
@@ -2089,83 +1742,7 @@ static int w83627ehf_probe(struct platform_device *pdev)
data->have_temp = 0x07;
/* Deal with temperature register setup first. */
- if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
- int mask = 0;
-
- /*
- * Display temperature sensor output only if it monitors
- * a source other than one already reported. Always display
- * first three temperature registers, though.
- */
- for (i = 0; i < NUM_REG_TEMP; i++) {
- u8 src;
-
- data->reg_temp[i] = NCT6775_REG_TEMP[i];
- data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i];
- data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i];
- data->reg_temp_config[i] = NCT6775_REG_TEMP_CONFIG[i];
-
- src = w83627ehf_read_value(data,
- NCT6775_REG_TEMP_SOURCE[i]);
- src &= 0x1f;
- if (src && !(mask & (1 << src))) {
- data->have_temp |= 1 << i;
- mask |= 1 << src;
- }
-
- data->temp_src[i] = src;
-
- /*
- * Now do some register swapping if index 0..2 don't
- * point to SYSTIN(1), CPUIN(2), and AUXIN(3).
- * Idea is to have the first three attributes
- * report SYSTIN, CPUIN, and AUXIN if possible
- * without overriding the basic system configuration.
- */
- if (i > 0 && data->temp_src[0] != 1
- && data->temp_src[i] == 1)
- w82627ehf_swap_tempreg(data, 0, i);
- if (i > 1 && data->temp_src[1] != 2
- && data->temp_src[i] == 2)
- w82627ehf_swap_tempreg(data, 1, i);
- if (i > 2 && data->temp_src[2] != 3
- && data->temp_src[i] == 3)
- w82627ehf_swap_tempreg(data, 2, i);
- }
- if (sio_data->kind == nct6776) {
- /*
- * On NCT6776, AUXTIN and VIN3 pins are shared.
- * Only way to detect it is to check if AUXTIN is used
- * as a temperature source, and if that source is
- * enabled.
- *
- * If that is the case, disable in6, which reports VIN3.
- * Otherwise disable temp3.
- */
- if (data->temp_src[2] == 3) {
- u8 reg;
-
- if (data->reg_temp_config[2])
- reg = w83627ehf_read_value(data,
- data->reg_temp_config[2]);
- else
- reg = 0; /* Assume AUXTIN is used */
-
- if (reg & 0x01)
- data->have_temp &= ~(1 << 2);
- else
- data->in6_skip = 1;
- }
- data->temp_label = nct6776_temp_label;
- } else {
- data->temp_label = nct6775_temp_label;
- }
- data->have_temp_offset = data->have_temp & 0x07;
- for (i = 0; i < 3; i++) {
- if (data->temp_src[i] > 3)
- data->have_temp_offset &= ~(1 << i);
- }
- } else if (sio_data->kind == w83667hg_b) {
+ if (sio_data->kind == w83667hg_b) {
u8 reg;
w83627ehf_set_temp_reg_ehf(data, 4);
@@ -2275,56 +1852,12 @@ static int w83627ehf_probe(struct platform_device *pdev)
data->have_temp_offset = data->have_temp & 0x07;
}
- if (sio_data->kind == nct6775) {
- data->has_fan_div = true;
- data->fan_from_reg = fan_from_reg16;
- data->fan_from_reg_min = fan_from_reg8;
- data->REG_PWM = NCT6775_REG_PWM;
- data->REG_TARGET = NCT6775_REG_TARGET;
- data->REG_FAN = NCT6775_REG_FAN;
- data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
- data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT;
- data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT;
- data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME;
- data->REG_FAN_MAX_OUTPUT = NCT6775_REG_FAN_MAX_OUTPUT;
- data->REG_FAN_STEP_OUTPUT = NCT6775_REG_FAN_STEP_OUTPUT;
- } else if (sio_data->kind == nct6776) {
- data->has_fan_div = false;
- data->fan_from_reg = fan_from_reg13;
- data->fan_from_reg_min = fan_from_reg13;
- data->REG_PWM = NCT6775_REG_PWM;
- data->REG_TARGET = NCT6775_REG_TARGET;
- data->REG_FAN = NCT6775_REG_FAN;
- data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
- data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT;
- data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT;
- data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME;
- } else if (sio_data->kind == w83667hg_b) {
- data->has_fan_div = true;
- data->fan_from_reg = fan_from_reg8;
- data->fan_from_reg_min = fan_from_reg8;
- data->REG_PWM = W83627EHF_REG_PWM;
- data->REG_TARGET = W83627EHF_REG_TARGET;
- data->REG_FAN = W83627EHF_REG_FAN;
- data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
- data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
- data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
- data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
+ if (sio_data->kind == w83667hg_b) {
data->REG_FAN_MAX_OUTPUT =
W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
data->REG_FAN_STEP_OUTPUT =
W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
} else {
- data->has_fan_div = true;
- data->fan_from_reg = fan_from_reg8;
- data->fan_from_reg_min = fan_from_reg8;
- data->REG_PWM = W83627EHF_REG_PWM;
- data->REG_TARGET = W83627EHF_REG_TARGET;
- data->REG_FAN = W83627EHF_REG_FAN;
- data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
- data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
- data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
- data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
data->REG_FAN_MAX_OUTPUT =
W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
data->REG_FAN_STEP_OUTPUT =
@@ -2347,8 +1880,7 @@ static int w83627ehf_probe(struct platform_device *pdev)
goto exit_release;
/* Read VID value */
- if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b ||
- sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+ if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
/*
* W83667HG has different pins for VID input and output, so
* we can get the VID input values directly at logical device D
@@ -2356,11 +1888,7 @@ static int w83627ehf_probe(struct platform_device *pdev)
*/
superio_select(sio_data->sioreg, W83667HG_LD_VID);
data->vid = superio_inb(sio_data->sioreg, 0xe3);
- err = device_create_file(dev, &dev_attr_cpu0_vid);
- if (err) {
- superio_exit(sio_data->sioreg);
- goto exit_release;
- }
+ data->have_vid = true;
} else if (sio_data->kind != w83627uhg) {
superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
@@ -2394,190 +1922,33 @@ static int w83627ehf_probe(struct platform_device *pdev)
SIO_REG_VID_DATA);
if (sio_data->kind == w83627ehf) /* 6 VID pins only */
data->vid &= 0x3f;
-
- err = device_create_file(dev, &dev_attr_cpu0_vid);
- if (err) {
- superio_exit(sio_data->sioreg);
- goto exit_release;
- }
+ data->have_vid = true;
} else {
dev_info(dev,
"VID pins in output mode, CPU VID not available\n");
}
}
- if (fan_debounce &&
- (sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
- u8 tmp;
-
- superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
- tmp = superio_inb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE);
- if (sio_data->kind == nct6776)
- superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE,
- 0x3e | tmp);
- else
- superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE,
- 0x1e | tmp);
- pr_info("Enabled fan debounce for chip %s\n", data->name);
- }
-
w83627ehf_check_fan_inputs(sio_data, data);
superio_exit(sio_data->sioreg);
/* Read fan clock dividers immediately */
- w83627ehf_update_fan_div_common(dev, data);
+ w83627ehf_update_fan_div(data);
/* Read pwm data to save original values */
- w83627ehf_update_pwm_common(dev, data);
+ w83627ehf_update_pwm(data);
for (i = 0; i < data->pwm_num; i++)
data->pwm_enable_orig[i] = data->pwm_enable[i];
- /* Register sysfs hooks */
- for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) {
- err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr);
- if (err)
- goto exit_remove;
- }
-
- for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
- struct sensor_device_attribute *attr =
- &sda_sf3_max_step_arrays[i];
- if (data->REG_FAN_STEP_OUTPUT &&
- data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) {
- err = device_create_file(dev, &attr->dev_attr);
- if (err)
- goto exit_remove;
- }
- }
- /* if fan3 and fan4 are enabled create the sf3 files for them */
- if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
- for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++) {
- err = device_create_file(dev,
- &sda_sf3_arrays_fan3[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
- for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
- err = device_create_file(dev,
- &sda_sf3_arrays_fan4[i].dev_attr);
- if (err)
- goto exit_remove;
- }
-
- for (i = 0; i < data->in_num; i++) {
- if ((i == 6) && data->in6_skip)
- continue;
- if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_in_alarm[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_in_min[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_in_max[i].dev_attr)))
- goto exit_remove;
- }
-
- for (i = 0; i < 5; i++) {
- if (data->has_fan & (1 << i)) {
- if ((err = device_create_file(dev,
- &sda_fan_input[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_fan_alarm[i].dev_attr)))
- goto exit_remove;
- if (sio_data->kind != nct6776) {
- err = device_create_file(dev,
- &sda_fan_div[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- if (data->has_fan_min & (1 << i)) {
- err = device_create_file(dev,
- &sda_fan_min[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- if (i < data->pwm_num &&
- ((err = device_create_file(dev,
- &sda_pwm[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_pwm_mode[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_pwm_enable[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_target_temp[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_tolerance[i].dev_attr))))
- goto exit_remove;
- }
- }
+ hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+ data->name,
+ data,
+ &w83627ehf_chip_info,
+ w83627ehf_groups);
- for (i = 0; i < NUM_REG_TEMP; i++) {
- if (!(data->have_temp & (1 << i)))
- continue;
- err = device_create_file(dev, &sda_temp_input[i].dev_attr);
- if (err)
- goto exit_remove;
- if (data->temp_label) {
- err = device_create_file(dev,
- &sda_temp_label[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- if (i == 2 && data->temp3_val_only)
- continue;
- if (data->reg_temp_over[i]) {
- err = device_create_file(dev,
- &sda_temp_max[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- if (data->reg_temp_hyst[i]) {
- err = device_create_file(dev,
- &sda_temp_max_hyst[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- if (i > 2)
- continue;
- if ((err = device_create_file(dev,
- &sda_temp_alarm[i].dev_attr))
- || (err = device_create_file(dev,
- &sda_temp_type[i].dev_attr)))
- goto exit_remove;
- if (data->have_temp_offset & (1 << i)) {
- err = device_create_file(dev,
- &sda_temp_offset[i].dev_attr);
- if (err)
- goto exit_remove;
- }
- }
-
- err = device_create_file(dev, &sda_caseopen[0].dev_attr);
- if (err)
- goto exit_remove;
-
- if (sio_data->kind == nct6776) {
- err = device_create_file(dev, &sda_caseopen[1].dev_attr);
- if (err)
- goto exit_remove;
- }
-
- err = device_create_file(dev, &dev_attr_name);
- if (err)
- goto exit_remove;
-
- data->hwmon_dev = hwmon_device_register(dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove;
- }
+ return PTR_ERR_OR_ZERO(hwmon_dev);
- return 0;
-
-exit_remove:
- w83627ehf_device_remove_files(dev);
exit_release:
release_region(res->start, IOREGION_LENGTH);
exit:
@@ -2588,8 +1959,6 @@ static int w83627ehf_remove(struct platform_device *pdev)
{
struct w83627ehf_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->hwmon_dev);
- w83627ehf_device_remove_files(&pdev->dev);
release_region(data->addr, IOREGION_LENGTH);
return 0;
@@ -2599,14 +1968,9 @@ static int w83627ehf_remove(struct platform_device *pdev)
static int w83627ehf_suspend(struct device *dev)
{
struct w83627ehf_data *data = w83627ehf_update_device(dev);
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
mutex_lock(&data->update_lock);
data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
- if (sio_data->kind == nct6775) {
- data->fandiv1 = w83627ehf_read_value(data, NCT6775_REG_FANDIV1);
- data->fandiv2 = w83627ehf_read_value(data, NCT6775_REG_FANDIV2);
- }
mutex_unlock(&data->update_lock);
return 0;
@@ -2615,7 +1979,6 @@ static int w83627ehf_suspend(struct device *dev)
static int w83627ehf_resume(struct device *dev)
{
struct w83627ehf_data *data = dev_get_drvdata(dev);
- struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
int i;
mutex_lock(&data->update_lock);
@@ -2636,7 +1999,7 @@ static int w83627ehf_resume(struct device *dev)
if (!(data->has_fan_min & (1 << i)))
continue;
- w83627ehf_write_value(data, data->REG_FAN_MIN[i],
+ w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i],
data->fan_min[i]);
}
@@ -2660,10 +2023,6 @@ static int w83627ehf_resume(struct device *dev)
/* Restore other settings */
w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat);
- if (sio_data->kind == nct6775) {
- w83627ehf_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
- w83627ehf_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
- }
/* Force re-reading all values */
data->valid = 0;
@@ -2704,8 +2063,6 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
static const char sio_name_W83627UHG[] __initconst = "W83627UHG";
static const char sio_name_W83667HG[] __initconst = "W83667HG";
static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B";
- static const char sio_name_NCT6775[] __initconst = "NCT6775F";
- static const char sio_name_NCT6776[] __initconst = "NCT6776F";
u16 val;
const char *sio_name;
@@ -2749,14 +2106,6 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
sio_data->kind = w83667hg_b;
sio_name = sio_name_W83667HG_B;
break;
- case SIO_NCT6775_ID:
- sio_data->kind = nct6775;
- sio_name = sio_name_NCT6775;
- break;
- case SIO_NCT6776_ID:
- sio_data->kind = nct6776;
- sio_name = sio_name_NCT6776;
- break;
default:
if (val != 0xffff)
pr_debug("unsupported chip ID: 0x%04x\n", val);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.