diff options
Diffstat (limited to 'drivers/hwtracing/coresight/coresight-etm4x.h')
| -rw-r--r-- | drivers/hwtracing/coresight/coresight-etm4x.h | 391 |
1 files changed, 391 insertions, 0 deletions
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h new file mode 100644 index 000000000000..e08e983dd2d9 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -0,0 +1,391 @@ +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CORESIGHT_CORESIGHT_ETM_H +#define _CORESIGHT_CORESIGHT_ETM_H + +#include <linux/spinlock.h> +#include "coresight-priv.h" + +/* + * Device registers: + * 0x000 - 0x2FC: Trace registers + * 0x300 - 0x314: Management registers + * 0x318 - 0xEFC: Trace registers + * 0xF00: Management registers + * 0xFA0 - 0xFA4: Trace registers + * 0xFA8 - 0xFFC: Management registers + */ +/* Trace registers (0x000-0x2FC) */ +/* Main control and configuration registers */ +#define TRCPRGCTLR 0x004 +#define TRCPROCSELR 0x008 +#define TRCSTATR 0x00C +#define TRCCONFIGR 0x010 +#define TRCAUXCTLR 0x018 +#define TRCEVENTCTL0R 0x020 +#define TRCEVENTCTL1R 0x024 +#define TRCSTALLCTLR 0x02C +#define TRCTSCTLR 0x030 +#define TRCSYNCPR 0x034 +#define TRCCCCTLR 0x038 +#define TRCBBCTLR 0x03C +#define TRCTRACEIDR 0x040 +#define TRCQCTLR 0x044 +/* Filtering control registers */ +#define TRCVICTLR 0x080 +#define TRCVIIECTLR 0x084 +#define TRCVISSCTLR 0x088 +#define TRCVIPCSSCTLR 0x08C +#define TRCVDCTLR 0x0A0 +#define TRCVDSACCTLR 0x0A4 +#define TRCVDARCCTLR 0x0A8 +/* Derived resources registers */ +#define TRCSEQEVRn(n) (0x100 + (n * 4)) +#define TRCSEQRSTEVR 0x118 +#define TRCSEQSTR 0x11C +#define TRCEXTINSELR 0x120 +#define TRCCNTRLDVRn(n) (0x140 + (n * 4)) +#define TRCCNTCTLRn(n) (0x150 + (n * 4)) +#define TRCCNTVRn(n) (0x160 + (n * 4)) +/* ID registers */ +#define TRCIDR8 0x180 +#define TRCIDR9 0x184 +#define TRCIDR10 0x188 +#define TRCIDR11 0x18C +#define TRCIDR12 0x190 +#define TRCIDR13 0x194 +#define TRCIMSPEC0 0x1C0 +#define TRCIMSPECn(n) (0x1C0 + (n * 4)) +#define TRCIDR0 0x1E0 +#define TRCIDR1 0x1E4 +#define TRCIDR2 0x1E8 +#define TRCIDR3 0x1EC +#define TRCIDR4 0x1F0 +#define TRCIDR5 0x1F4 +#define TRCIDR6 0x1F8 +#define TRCIDR7 0x1FC +/* Resource selection registers */ +#define TRCRSCTLRn(n) (0x200 + (n * 4)) +/* Single-shot comparator registers */ +#define TRCSSCCRn(n) (0x280 + (n * 4)) +#define TRCSSCSRn(n) (0x2A0 + (n * 4)) +#define TRCSSPCICRn(n) (0x2C0 + (n * 4)) +/* Management registers (0x300-0x314) */ +#define TRCOSLAR 0x300 +#define TRCOSLSR 0x304 +#define TRCPDCR 0x310 +#define TRCPDSR 0x314 +/* Trace registers (0x318-0xEFC) */ +/* Comparator registers */ +#define TRCACVRn(n) (0x400 + (n * 8)) +#define TRCACATRn(n) (0x480 + (n * 8)) +#define TRCDVCVRn(n) (0x500 + (n * 16)) +#define TRCDVCMRn(n) (0x580 + (n * 16)) +#define TRCCIDCVRn(n) (0x600 + (n * 8)) +#define TRCVMIDCVRn(n) (0x640 + (n * 8)) +#define TRCCIDCCTLR0 0x680 +#define TRCCIDCCTLR1 0x684 +#define TRCVMIDCCTLR0 0x688 +#define TRCVMIDCCTLR1 0x68C +/* Management register (0xF00) */ +/* Integration control registers */ +#define TRCITCTRL 0xF00 +/* Trace registers (0xFA0-0xFA4) */ +/* Claim tag registers */ +#define TRCCLAIMSET 0xFA0 +#define TRCCLAIMCLR 0xFA4 +/* Management registers (0xFA8-0xFFC) */ +#define TRCDEVAFF0 0xFA8 +#define TRCDEVAFF1 0xFAC +#define TRCLAR 0xFB0 +#define TRCLSR 0xFB4 +#define TRCAUTHSTATUS 0xFB8 +#define TRCDEVARCH 0xFBC +#define TRCDEVID 0xFC8 +#define TRCDEVTYPE 0xFCC +#define TRCPIDR4 0xFD0 +#define TRCPIDR5 0xFD4 +#define TRCPIDR6 0xFD8 +#define TRCPIDR7 0xFDC +#define TRCPIDR0 0xFE0 +#define TRCPIDR1 0xFE4 +#define TRCPIDR2 0xFE8 +#define TRCPIDR3 0xFEC +#define TRCCIDR0 0xFF0 +#define TRCCIDR1 0xFF4 +#define TRCCIDR2 0xFF8 +#define TRCCIDR3 0xFFC + +/* ETMv4 resources */ +#define ETM_MAX_NR_PE 8 +#define ETMv4_MAX_CNTR 4 +#define ETM_MAX_SEQ_STATES 4 +#define ETM_MAX_EXT_INP_SEL 4 +#define ETM_MAX_EXT_INP 256 +#define ETM_MAX_EXT_OUT 4 +#define ETM_MAX_SINGLE_ADDR_CMP 16 +#define ETM_MAX_ADDR_RANGE_CMP (ETM_MAX_SINGLE_ADDR_CMP / 2) +#define ETM_MAX_DATA_VAL_CMP 8 +#define ETMv4_MAX_CTXID_CMP 8 +#define ETM_MAX_VMID_CMP 8 +#define ETM_MAX_PE_CMP 8 +#define ETM_MAX_RES_SEL 16 +#define ETM_MAX_SS_CMP 8 + +#define ETM_ARCH_V4 0x40 +#define ETMv4_SYNC_MASK 0x1F +#define ETM_CYC_THRESHOLD_MASK 0xFFF +#define ETMv4_EVENT_MASK 0xFF +#define ETM_CNTR_MAX_VAL 0xFFFF +#define ETM_TRACEID_MASK 0x3f + +/* ETMv4 programming modes */ +#define ETM_MODE_EXCLUDE BIT(0) +#define ETM_MODE_LOAD BIT(1) +#define ETM_MODE_STORE BIT(2) +#define ETM_MODE_LOAD_STORE BIT(3) +#define ETM_MODE_BB BIT(4) +#define ETMv4_MODE_CYCACC BIT(5) +#define ETMv4_MODE_CTXID BIT(6) +#define ETM_MODE_VMID BIT(7) +#define ETM_MODE_COND(val) BMVAL(val, 8, 10) +#define ETMv4_MODE_TIMESTAMP BIT(11) +#define ETM_MODE_RETURNSTACK BIT(12) +#define ETM_MODE_QELEM(val) BMVAL(val, 13, 14) +#define ETM_MODE_DATA_TRACE_ADDR BIT(15) +#define ETM_MODE_DATA_TRACE_VAL BIT(16) +#define ETM_MODE_ISTALL BIT(17) +#define ETM_MODE_DSTALL BIT(18) +#define ETM_MODE_ATB_TRIGGER BIT(19) +#define ETM_MODE_LPOVERRIDE BIT(20) +#define ETM_MODE_ISTALL_EN BIT(21) +#define ETM_MODE_DSTALL_EN BIT(22) +#define ETM_MODE_INSTPRIO BIT(23) +#define ETM_MODE_NOOVERFLOW BIT(24) +#define ETM_MODE_TRACE_RESET BIT(25) +#define ETM_MODE_TRACE_ERR BIT(26) +#define ETM_MODE_VIEWINST_STARTSTOP BIT(27) +#define ETMv4_MODE_ALL 0xFFFFFFF + +#define TRCSTATR_IDLE_BIT 0 + +/** + * struct etm4_drvdata - specifics associated to an ETM component + * @base: Memory mapped base address for this component. + * @dev: The device entity associated to this component. + * @csdev: Component vitals needed by the framework. + * @spinlock: Only one at a time pls. + * @cpu: The cpu this component is affined to. + * @arch: ETM version number. + * @enable: Is this ETM currently tracing. + * @sticky_enable: true if ETM base configuration has been done. + * @boot_enable:True if we should start tracing at boot time. + * @os_unlock: True if access to management registers is allowed. + * @nr_pe: The number of processing entity available for tracing. + * @nr_pe_cmp: The number of processing entity comparator inputs that are + * available for tracing. + * @nr_addr_cmp:Number of pairs of address comparators available + * as found in ETMIDR4 0-3. + * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30. + * @nr_ext_inp: Number of external input. + * @numcidc: Number of contextID comparators. + * @numvmidc: Number of VMID comparators. + * @nrseqstate: The number of sequencer states that are implemented. + * @nr_event: Indicates how many events the trace unit support. + * @nr_resource:The number of resource selection pairs available for tracing. + * @nr_ss_cmp: Number of single-shot comparator controls that are available. + * @mode: Controls various modes supported by this ETM. + * @trcid: value of the current ID for this component. + * @trcid_size: Indicates the trace ID width. + * @instrp0: Tracing of load and store instructions + * as P0 elements is supported. + * @trccond: If the trace unit supports conditional + * instruction tracing. + * @retstack: Indicates if the implementation supports a return stack. + * @trc_error: Whether a trace unit can trace a system + * error exception. + * @atbtrig: If the implementation can support ATB triggers + * @lpoverride: If the implementation can support low-power state over. + * @pe_sel: Controls which PE to trace. + * @cfg: Controls the tracing options. + * @eventctrl0: Controls the tracing of arbitrary events. + * @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects. + * @stallctl: If functionality that prevents trace unit buffer overflows + * is available. + * @sysstall: Does the system support stall control of the PE? + * @nooverflow: Indicate if overflow prevention is supported. + * @stall_ctrl: Enables trace unit functionality that prevents trace + * unit buffer overflows. + * @ts_size: Global timestamp size field. + * @ts_ctrl: Controls the insertion of global timestamps in the + * trace streams. + * @syncpr: Indicates if an implementation has a fixed + * synchronization period. + * @syncfreq: Controls how often trace synchronization requests occur. + * @trccci: Indicates if the trace unit supports cycle counting + * for instruction. + * @ccsize: Indicates the size of the cycle counter in bits. + * @ccitmin: minimum value that can be programmed in + * the TRCCCCTLR register. + * @ccctlr: Sets the threshold value for cycle counting. + * @trcbb: Indicates if the trace unit supports branch broadcast tracing. + * @q_support: Q element support characteristics. + * @vinst_ctrl: Controls instruction trace filtering. + * @viiectlr: Set or read, the address range comparators. + * @vissctlr: Set, or read, the single address comparators that control the + * ViewInst start-stop logic. + * @vipcssctlr: Set, or read, which PE comparator inputs can control the + * ViewInst start-stop logic. + * @seq_idx: Sequencor index selector. + * @seq_ctrl: Control for the sequencer state transition control register. + * @seq_rst: Moves the sequencer to state 0 when a programmed event occurs. + * @seq_state: Set, or read the sequencer state. + * @cntr_idx: Counter index seletor. + * @cntrldvr: Sets or returns the reload count value for a counter. + * @cntr_ctrl: Controls the operation of a counter. + * @cntr_val: Sets or returns the value for a counter. + * @res_idx: Resource index selector. + * @res_ctrl: Controls the selection of the resources in the trace unit. + * @ss_ctrl: Controls the corresponding single-shot comparator resource. + * @ss_status: The status of the corresponding single-shot comparator. + * @ss_pe_cmp: Selects the PE comparator inputs for Single-shot control. + * @addr_idx: Address comparator index selector. + * @addr_val: Value for address comparator. + * @addr_acc: Address comparator access type. + * @addr_type: Current status of the comparator register. + * @ctxid_idx: Context ID index selector. + * @ctxid_size: Size of the context ID field to consider. + * @ctxid_val: Value of the context ID comparator. + * @ctxid_mask0:Context ID comparator mask for comparator 0-3. + * @ctxid_mask1:Context ID comparator mask for comparator 4-7. + * @vmid_idx: VM ID index selector. + * @vmid_size: Size of the VM ID comparator to consider. + * @vmid_val: Value of the VM ID comparator. + * @vmid_mask0: VM ID comparator mask for comparator 0-3. + * @vmid_mask1: VM ID comparator mask for comparator 4-7. + * @s_ex_level: In secure state, indicates whether instruction tracing is + * supported for the corresponding Exception level. + * @ns_ex_level:In non-secure state, indicates whether instruction tracing is + * supported for the corresponding Exception level. + * @ext_inp: External input selection. + */ +struct etmv4_drvdata { + void __iomem *base; + struct device *dev; + struct coresight_device *csdev; + spinlock_t spinlock; + int cpu; + u8 arch; + bool enable; + bool sticky_enable; + bool boot_enable; + bool os_unlock; + u8 nr_pe; + u8 nr_pe_cmp; + u8 nr_addr_cmp; + u8 nr_cntr; + u8 nr_ext_inp; + u8 numcidc; + u8 numvmidc; + u8 nrseqstate; + u8 nr_event; + u8 nr_resource; + u8 nr_ss_cmp; + u32 mode; + u8 trcid; + u8 trcid_size; + bool instrp0; + bool trccond; + bool retstack; + bool trc_error; + bool atbtrig; + bool lpoverride; + u32 pe_sel; + u32 cfg; + u32 eventctrl0; + u32 eventctrl1; + bool stallctl; + bool sysstall; + bool nooverflow; + u32 stall_ctrl; + u8 ts_size; + u32 ts_ctrl; + bool syncpr; + u32 syncfreq; + bool trccci; + u8 ccsize; + u8 ccitmin; + u32 ccctlr; + bool trcbb; + u32 bb_ctrl; + bool q_support; + u32 vinst_ctrl; + u32 viiectlr; + u32 vissctlr; + u32 vipcssctlr; + u8 seq_idx; + u32 seq_ctrl[ETM_MAX_SEQ_STATES]; + u32 seq_rst; + u32 seq_state; + u8 cntr_idx; + u32 cntrldvr[ETMv4_MAX_CNTR]; + u32 cntr_ctrl[ETMv4_MAX_CNTR]; + u32 cntr_val[ETMv4_MAX_CNTR]; + u8 res_idx; + u32 res_ctrl[ETM_MAX_RES_SEL]; + u32 ss_ctrl[ETM_MAX_SS_CMP]; + u32 ss_status[ETM_MAX_SS_CMP]; + u32 ss_pe_cmp[ETM_MAX_SS_CMP]; + u8 addr_idx; + u64 addr_val[ETM_MAX_SINGLE_ADDR_CMP]; + u64 addr_acc[ETM_MAX_SINGLE_ADDR_CMP]; + u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP]; + u8 ctxid_idx; + u8 ctxid_size; + u64 ctxid_val[ETMv4_MAX_CTXID_CMP]; + u32 ctxid_mask0; + u32 ctxid_mask1; + u8 vmid_idx; + u8 vmid_size; + u64 vmid_val[ETM_MAX_VMID_CMP]; + u32 vmid_mask0; + u32 vmid_mask1; + u8 s_ex_level; + u8 ns_ex_level; + u32 ext_inp; +}; + +/* Address comparator access types */ +enum etm_addr_acctype { + ETM_INSTR_ADDR, + ETM_DATA_LOAD_ADDR, + ETM_DATA_STORE_ADDR, + ETM_DATA_LOAD_STORE_ADDR, +}; + +/* Address comparator context types */ +enum etm_addr_ctxtype { + ETM_CTX_NONE, + ETM_CTX_CTXID, + ETM_CTX_VMID, + ETM_CTX_CTXID_VMID, +}; + +enum etm_addr_type { + ETM_ADDR_TYPE_NONE, + ETM_ADDR_TYPE_SINGLE, + ETM_ADDR_TYPE_RANGE, + ETM_ADDR_TYPE_START, + ETM_ADDR_TYPE_STOP, +}; +#endif |