aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/algos/i2c-algo-ite.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/algos/i2c-algo-ite.h')
-rw-r--r--drivers/i2c/algos/i2c-algo-ite.h117
1 files changed, 117 insertions, 0 deletions
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
new file mode 100644
index 000000000000..a8ca3c9b546a
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-ite.h
@@ -0,0 +1,117 @@
+/*
+ --------------------------------------------------------------------
+ i2c-ite.h: Global defines for the I2C controller on board the
+ ITE MIPS processor.
+ --------------------------------------------------------------------
+ Hai-Pao Fan, MontaVista Software, Inc.
+ hpfan@mvista.com or source@mvista.com
+
+ Copyright 2001 MontaVista Software Inc.
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#ifndef I2C_ITE_H
+#define I2C_ITE_H 1
+
+#include <asm/it8172/it8172.h>
+
+/* I2C Registers */
+#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
+#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
+#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
+#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
+#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
+#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
+#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
+#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
+
+#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
+#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
+#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
+#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
+
+
+/* Host Control Register ITE_I2CHCR */
+#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */
+#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing
+ the current transaction */
+#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */
+#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */
+#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */
+#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute
+ the command and send the data programmed in
+ all required registers to I2C bus */
+#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
+#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W
+#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R
+#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S
+
+/* Host Status Register ITE_I2CHSR */
+#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except
+ in the first and last bytes */
+#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */
+#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */
+#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */
+#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */
+
+/* Slave Address Register ITE_I2CSAR */
+#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */
+#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the
+ next slave address is addressed */
+
+/* Slave Sub-address Register ITE_I2CSSAR */
+#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */
+
+/* Clock Counter Register ITE_I2CCKCNT */
+#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */
+#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */
+#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */
+
+/* START Hold Time Register ITE_I2CSHDR */
+/* value is counted based on 16 MHz internal clock */
+#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */
+#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */
+
+/* (Repeated) START Setup Time Register ITE_I2CRSUR */
+/* value is counted based on 16 MHz internal clock */
+#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */
+#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */
+
+/* STOP setup Time Register ITE_I2CPSUR */
+
+/* FIFO Data Register ITE_I2CFDR */
+#define ITE_I2CFDR_MASK 0xff
+
+/* FIFO Byte Count Register ITE_I2CFBCR */
+#define ITE_I2CFBCR_MASK 0x3f
+
+/* FIFO Control Register ITE_I2CFCR */
+#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point
+ and I2CFSR */
+/* FIFO Status Register ITE_I2CFSR */
+#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */
+#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */
+#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */
+#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */
+
+#endif /* I2C_ITE_H */