aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-piix4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-piix4.c')
-rw-r--r--drivers/i2c/busses/i2c-piix4.c33
1 files changed, 8 insertions, 25 deletions
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d9c7c00e71f9..8f2f65b793b9 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -102,13 +102,6 @@ MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
"EXTREMELY DANGEROUS!");
-/* If fix_hstcfg is set to anything different from 0, we reset one of the
- registers to be a valid value. */
-static int fix_hstcfg;
-module_param (fix_hstcfg, int, 0);
-MODULE_PARM_DESC(fix_hstcfg,
- "Fix config register. Needed on some boards (Force CPCI735).");
-
static int piix4_transaction(void);
static unsigned short piix4_smba;
@@ -137,7 +130,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
/* Don't access SMBus on IBM systems which get corrupted eeproms */
if (dmi_check_system(piix4_dmi_table) &&
PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
- dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+ dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
"may corrupt your serial eeprom! Refusing to load "
"module!\n");
return -EPERM;
@@ -166,22 +159,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
- /* Some BIOS will set up the chipset incorrectly and leave a register
- in an undefined state (causing I2C to act very strangely). */
- if (temp & 0x02) {
- if (fix_hstcfg) {
- dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
- "(I2C)\n");
- temp &= 0xfd;
- pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
- } else {
- dev_info(&PIIX4_dev->dev, "Unusual config register "
- "value\n");
- dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
- "you experience problems\n");
- }
- }
-
/* If force_addr is set, we program the new address here. Just to make
sure, we disable the PIIX4 first. */
if (force_addr) {
@@ -214,7 +191,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
}
}
- if ((temp & 0x0E) == 8)
+ if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
else if ((temp & 0x0E) == 0)
dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
@@ -413,6 +390,12 @@ static struct i2c_adapter piix4_adapter = {
static struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
.driver_data = 3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS),
+ .driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),