diff options
Diffstat (limited to 'drivers/ide/pci/cmd64x.c')
| -rw-r--r-- | drivers/ide/pci/cmd64x.c | 537 |
1 files changed, 279 insertions, 258 deletions
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 561197f7b5bb..77f51ab6d439 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -1,10 +1,7 @@ -/* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16 - * - * linux/drivers/ide/pci/cmd64x.c Version 1.42 Feb 8, 2007 +/* + * linux/drivers/ide/pci/cmd64x.c Version 1.47 Mar 19, 2007 * * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. - * Note, this driver is not used at all on other systems because - * there the "BIOS" has done all of the following already. * Due to massive hardware bugs, UltraDMA is only supported * on the 646U2 and not on the 646U. * @@ -39,11 +36,12 @@ * CMD64x specific registers definition. */ #define CFR 0x50 -#define CFR_INTR_CH0 0x02 +#define CFR_INTR_CH0 0x04 #define CNTRL 0x51 -#define CNTRL_DIS_RA0 0x40 -#define CNTRL_DIS_RA1 0x80 -#define CNTRL_ENA_2ND 0x08 +#define CNTRL_ENA_1ST 0x04 +#define CNTRL_ENA_2ND 0x08 +#define CNTRL_DIS_RA0 0x40 +#define CNTRL_DIS_RA1 0x80 #define CMDTIM 0x52 #define ARTTIM0 0x53 @@ -90,86 +88,67 @@ static int n_cmd_devs; static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) { char *p = buf; - - u8 reg53 = 0, reg54 = 0, reg55 = 0, reg56 = 0; /* primary */ - u8 reg57 = 0, reg58 = 0, reg5b; /* secondary */ u8 reg72 = 0, reg73 = 0; /* primary */ u8 reg7a = 0, reg7b = 0; /* secondary */ - u8 reg50 = 0, reg71 = 0; /* extra */ + u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */ + u8 rev = 0; p += sprintf(p, "\nController: %d\n", index); - p += sprintf(p, "CMD%x Chipset.\n", dev->device); + p += sprintf(p, "PCI-%x Chipset.\n", dev->device); + (void) pci_read_config_byte(dev, CFR, ®50); - (void) pci_read_config_byte(dev, ARTTIM0, ®53); - (void) pci_read_config_byte(dev, DRWTIM0, ®54); - (void) pci_read_config_byte(dev, ARTTIM1, ®55); - (void) pci_read_config_byte(dev, DRWTIM1, ®56); - (void) pci_read_config_byte(dev, ARTTIM2, ®57); - (void) pci_read_config_byte(dev, DRWTIM2, ®58); - (void) pci_read_config_byte(dev, DRWTIM3, ®5b); + (void) pci_read_config_byte(dev, CNTRL, ®51); + (void) pci_read_config_byte(dev, ARTTIM23, ®57); (void) pci_read_config_byte(dev, MRDMODE, ®71); (void) pci_read_config_byte(dev, BMIDESR0, ®72); (void) pci_read_config_byte(dev, UDIDETCR0, ®73); (void) pci_read_config_byte(dev, BMIDESR1, ®7a); (void) pci_read_config_byte(dev, UDIDETCR1, ®7b); - p += sprintf(p, "--------------- Primary Channel " - "---------------- Secondary Channel " - "-------------\n"); - p += sprintf(p, " %sabled " - " %sabled\n", - (reg72&0x80)?"dis":" en", - (reg7a&0x80)?"dis":" en"); - p += sprintf(p, "--------------- drive0 " - "--------- drive1 -------- drive0 " - "---------- drive1 ------\n"); - p += sprintf(p, "DMA enabled: %s %s" - " %s %s\n", - (reg72&0x20)?"yes":"no ", (reg72&0x40)?"yes":"no ", - (reg7a&0x20)?"yes":"no ", (reg7a&0x40)?"yes":"no "); - - p += sprintf(p, "DMA Mode: %s(%s) %s(%s)", - (reg72&0x20)?((reg73&0x01)?"UDMA":" DMA"):" PIO", - (reg72&0x20)?( - ((reg73&0x30)==0x30)?(((reg73&0x35)==0x35)?"3":"0"): - ((reg73&0x20)==0x20)?(((reg73&0x25)==0x25)?"3":"1"): - ((reg73&0x10)==0x10)?(((reg73&0x15)==0x15)?"4":"2"): - ((reg73&0x00)==0x00)?(((reg73&0x05)==0x05)?"5":"2"): - "X"):"?", - (reg72&0x40)?((reg73&0x02)?"UDMA":" DMA"):" PIO", - (reg72&0x40)?( - ((reg73&0xC0)==0xC0)?(((reg73&0xC5)==0xC5)?"3":"0"): - ((reg73&0x80)==0x80)?(((reg73&0x85)==0x85)?"3":"1"): - ((reg73&0x40)==0x40)?(((reg73&0x4A)==0x4A)?"4":"2"): - ((reg73&0x00)==0x00)?(((reg73&0x0A)==0x0A)?"5":"2"): - "X"):"?"); - p += sprintf(p, " %s(%s) %s(%s)\n", - (reg7a&0x20)?((reg7b&0x01)?"UDMA":" DMA"):" PIO", - (reg7a&0x20)?( - ((reg7b&0x30)==0x30)?(((reg7b&0x35)==0x35)?"3":"0"): - ((reg7b&0x20)==0x20)?(((reg7b&0x25)==0x25)?"3":"1"): - ((reg7b&0x10)==0x10)?(((reg7b&0x15)==0x15)?"4":"2"): - ((reg7b&0x00)==0x00)?(((reg7b&0x05)==0x05)?"5":"2"): - "X"):"?", - (reg7a&0x40)?((reg7b&0x02)?"UDMA":" DMA"):" PIO", - (reg7a&0x40)?( - ((reg7b&0xC0)==0xC0)?(((reg7b&0xC5)==0xC5)?"3":"0"): - ((reg7b&0x80)==0x80)?(((reg7b&0x85)==0x85)?"3":"1"): - ((reg7b&0x40)==0x40)?(((reg7b&0x4A)==0x4A)?"4":"2"): - ((reg7b&0x00)==0x00)?(((reg7b&0x0A)==0x0A)?"5":"2"): - "X"):"?" ); - p += sprintf(p, "PIO Mode: %s %s" - " %s %s\n", - "?", "?", "?", "?"); - p += sprintf(p, " %s %s\n", - (reg50 & CFR_INTR_CH0) ? "interrupting" : "polling ", - (reg57 & ARTTIM23_INTR_CH1) ? "interrupting" : "polling"); - p += sprintf(p, " %s %s\n", - (reg71 & MRDMODE_INTR_CH0) ? "pending" : "clear ", - (reg71 & MRDMODE_INTR_CH1) ? "pending" : "clear"); - p += sprintf(p, " %s %s\n", - (reg71 & MRDMODE_BLK_CH0) ? "blocked" : "enabled", - (reg71 & MRDMODE_BLK_CH1) ? "blocked" : "enabled"); + /* PCI0643/6 originally didn't have the primary channel enable bit */ + (void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + if ((dev->device == PCI_DEVICE_ID_CMD_643) || + (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3)) + reg51 |= CNTRL_ENA_1ST; + + p += sprintf(p, "---------------- Primary Channel " + "---------------- Secondary Channel ------------\n"); + p += sprintf(p, " %s %s\n", + (reg51 & CNTRL_ENA_1ST) ? "enabled " : "disabled", + (reg51 & CNTRL_ENA_2ND) ? "enabled " : "disabled"); + p += sprintf(p, "---------------- drive0 --------- drive1 " + "-------- drive0 --------- drive1 ------\n"); + p += sprintf(p, "DMA enabled: %s %s" + " %s %s\n", + (reg72 & 0x20) ? "yes" : "no ", (reg72 & 0x40) ? "yes" : "no ", + (reg7a & 0x20) ? "yes" : "no ", (reg7a & 0x40) ? "yes" : "no "); + p += sprintf(p, "UltraDMA mode: %s (%c) %s (%c)", + ( reg73 & 0x01) ? " on" : "off", + ((reg73 & 0x30) == 0x30) ? ((reg73 & 0x04) ? '3' : '0') : + ((reg73 & 0x30) == 0x20) ? ((reg73 & 0x04) ? '3' : '1') : + ((reg73 & 0x30) == 0x10) ? ((reg73 & 0x04) ? '4' : '2') : + ((reg73 & 0x30) == 0x00) ? ((reg73 & 0x04) ? '5' : '2') : '?', + ( reg73 & 0x02) ? " on" : "off", + ((reg73 & 0xC0) == 0xC0) ? ((reg73 & 0x08) ? '3' : '0') : + ((reg73 & 0xC0) == 0x80) ? ((reg73 & 0x08) ? '3' : '1') : + ((reg73 & 0xC0) == 0x40) ? ((reg73 & 0x08) ? '4' : '2') : + ((reg73 & 0xC0) == 0x00) ? ((reg73 & 0x08) ? '5' : '2') : '?'); + p += sprintf(p, " %s (%c) %s (%c)\n", + ( reg7b & 0x01) ? " on" : "off", + ((reg7b & 0x30) == 0x30) ? ((reg7b & 0x04) ? '3' : '0') : + ((reg7b & 0x30) == 0x20) ? ((reg7b & 0x04) ? '3' : '1') : + ((reg7b & 0x30) == 0x10) ? ((reg7b & 0x04) ? '4' : '2') : + ((reg7b & 0x30) == 0x00) ? ((reg7b & 0x04) ? '5' : '2') : '?', + ( reg7b & 0x02) ? " on" : "off", + ((reg7b & 0xC0) == 0xC0) ? ((reg7b & 0x08) ? '3' : '0') : + ((reg7b & 0xC0) == 0x80) ? ((reg7b & 0x08) ? '3' : '1') : + ((reg7b & 0xC0) == 0x40) ? ((reg7b & 0x08) ? '4' : '2') : + ((reg7b & 0xC0) == 0x00) ? ((reg7b & 0x08) ? '5' : '2') : '?'); + p += sprintf(p, "Interrupt: %s, %s %s, %s\n", + (reg71 & MRDMODE_BLK_CH0 ) ? "blocked" : "enabled", + (reg50 & CFR_INTR_CH0 ) ? "pending" : "clear ", + (reg71 & MRDMODE_BLK_CH1 ) ? "blocked" : "enabled", + (reg57 & ARTTIM23_INTR_CH1) ? "pending" : "clear "); return (char *)p; } @@ -179,7 +158,6 @@ static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count) char *p = buffer; int i; - p += sprintf(p, "\n"); for (i = 0; i < n_cmd_devs; i++) { struct pci_dev *dev = cmd_devs[i]; p = print_cmd64x_get_info(p, dev, i); @@ -195,116 +173,103 @@ static u8 quantize_timing(int timing, int quant) } /* - * This routine writes the prepared setup/active/recovery counts - * for a drive into the cmd646 chipset registers to active them. + * This routine calculates active/recovery counts and then writes them into + * the chipset registers. */ -static void program_drive_counts (ide_drive_t *drive, int setup_count, int active_count, int recovery_count) +static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) { - unsigned long flags; - struct pci_dev *dev = HWIF(drive)->pci_dev; - ide_drive_t *drives = HWIF(drive)->drives; - u8 temp_b; - static const u8 setup_counts[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; - static const u8 recovery_counts[] = + struct pci_dev *dev = HWIF(drive)->pci_dev; + int clock_time = 1000 / system_bus_clock(); + u8 cycle_count, active_count, recovery_count, drwtim; + static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; - static const u8 arttim_regs[2][2] = { - { ARTTIM0, ARTTIM1 }, - { ARTTIM23, ARTTIM23 } - }; - static const u8 drwtim_regs[2][2] = { - { DRWTIM0, DRWTIM1 }, - { DRWTIM2, DRWTIM3 } - }; - int channel = (int) HWIF(drive)->channel; - int slave = (drives != drive); /* Is this really the best way to determine this?? */ - - cmdprintk("program_drive_count parameters = s(%d),a(%d),r(%d),p(%d)\n", - setup_count, active_count, recovery_count, drive->present); + static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; + + cmdprintk("program_cycle_times parameters: total=%d, active=%d\n", + cycle_time, active_time); + + cycle_count = quantize_timing( cycle_time, clock_time); + active_count = quantize_timing(active_time, clock_time); + recovery_count = cycle_count - active_count; + /* - * Set up address setup count registers. - * Primary interface has individual count/timing registers for - * each drive. Secondary interface has one common set of registers, - * for address setup so we merge these timings, using the slowest - * value. + * In case we've got too long recovery phase, try to lengthen + * the active phase */ - if (channel) { - drive->drive_data = setup_count; - setup_count = max(drives[0].drive_data, - drives[1].drive_data); - cmdprintk("Secondary interface, setup_count = %d\n", - setup_count); + if (recovery_count > 16) { + active_count += recovery_count - 16; + recovery_count = 16; } + if (active_count > 16) /* shouldn't actually happen... */ + active_count = 16; + + cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n", + cycle_count, active_count, recovery_count); /* * Convert values to internal chipset representation */ - setup_count = (setup_count > 5) ? 0xc0 : (int) setup_counts[setup_count]; - active_count &= 0xf; /* Remember, max value is 16 */ - recovery_count = (int) recovery_counts[recovery_count]; + recovery_count = recovery_values[recovery_count]; + active_count &= 0x0f; - cmdprintk("Final values = %d,%d,%d\n", - setup_count, active_count, recovery_count); - - /* - * Now that everything is ready, program the new timings - */ - local_irq_save(flags); - /* - * Program the address_setup clocks into ARTTIM reg, - * and then the active/recovery counts into the DRWTIM reg - */ - (void) pci_read_config_byte(dev, arttim_regs[channel][slave], &temp_b); - (void) pci_write_config_byte(dev, arttim_regs[channel][slave], - ((u8) setup_count) | (temp_b & 0x3f)); - (void) pci_write_config_byte(dev, drwtim_regs[channel][slave], - (u8) ((active_count << 4) | recovery_count)); - cmdprintk ("Write %x to %x\n", - ((u8) setup_count) | (temp_b & 0x3f), - arttim_regs[channel][slave]); - cmdprintk ("Write %x to %x\n", - (u8) ((active_count << 4) | recovery_count), - drwtim_regs[channel][slave]); - local_irq_restore(flags); + /* Program the active/recovery counts into the DRWTIM register */ + drwtim = (active_count << 4) | recovery_count; + (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); + cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]); } /* - * This routine selects drive's best PIO mode, calculates setup/active/recovery - * counts, and then writes them into the chipset registers. + * This routine selects drive's best PIO mode and writes into the chipset + * registers setup/active/recovery timings. */ static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted) { - int setup_time, active_time, cycle_time; - u8 cycle_count, setup_count, active_count, recovery_count; - u8 pio_mode; - int clock_time = 1000 / system_bus_clock(); + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; ide_pio_data_t pio; - + u8 pio_mode, setup_count, arttim = 0; + static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &pio); - cycle_time = pio.cycle_time; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; + cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)%s\n", + drive->name, mode_wanted, pio_mode, pio.cycle_time, + pio.overridden ? " (overriding vendor mode)" : ""); - setup_count = quantize_timing( setup_time, clock_time); - cycle_count = quantize_timing( cycle_time, clock_time); - active_count = quantize_timing(active_time, clock_time); + program_cycle_times(drive, pio.cycle_time, + ide_pio_timings[pio_mode].active_time); - recovery_count = cycle_count - active_count; - /* program_drive_counts() takes care of zero recovery cycles */ - if (recovery_count > 16) { - active_count += recovery_count - 16; - recovery_count = 16; + setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time, + 1000 / system_bus_clock()); + + /* + * The primary channel has individual address setup timing registers + * for each drive and the hardware selects the slowest timing itself. + * The secondary channel has one common register and we have to select + * the slowest address setup timing ourselves. + */ + if (hwif->channel) { + ide_drive_t *drives = hwif->drives; + + drive->drive_data = setup_count; + setup_count = max(drives[0].drive_data, drives[1].drive_data); } - if (active_count > 16) - active_count = 16; /* maximum allowed by cmd64x */ - program_drive_counts (drive, setup_count, active_count, recovery_count); + if (setup_count > 5) /* shouldn't actually happen... */ + setup_count = 5; + cmdprintk("Final address setup count: %d\n", setup_count); - cmdprintk("%s: PIO mode wanted %d, selected %d (%dns)%s, " - "clocks=%d/%d/%d\n", - drive->name, mode_wanted, pio_mode, cycle_time, - pio.overridden ? " (overriding vendor mode)" : "", - setup_count, active_count, recovery_count); + /* + * Program the address setup clocks into the ARTTIM registers. + * Avoid clearing the secondary channel's interrupt bit. + */ + (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim); + if (hwif->channel) + arttim &= ~ARTTIM23_INTR_CH1; + arttim &= ~0xc0; + arttim |= setup_values[setup_count]; + (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); + cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]); return pio_mode; } @@ -376,61 +341,64 @@ static u8 cmd64x_ratemask (ide_drive_t *drive) return mode; } -static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed) +static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; + u8 unit = drive->dn & 0x01; + u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; - u8 unit = (drive->select.b.unit & 0x01); - u8 regU = 0, pciU = (hwif->channel) ? UDIDETCR1 : UDIDETCR0; - u8 regD = 0, pciD = (hwif->channel) ? BMIDESR1 : BMIDESR0; - - u8 speed = ide_rate_filter(cmd64x_ratemask(drive), xferspeed); + speed = ide_rate_filter(cmd64x_ratemask(drive), speed); if (speed >= XFER_SW_DMA_0) { - (void) pci_read_config_byte(dev, pciD, ®D); (void) pci_read_config_byte(dev, pciU, ®U); - regD &= ~(unit ? 0x40 : 0x20); regU &= ~(unit ? 0xCA : 0x35); - (void) pci_write_config_byte(dev, pciD, regD); - (void) pci_write_config_byte(dev, pciU, regU); - (void) pci_read_config_byte(dev, pciD, ®D); - (void) pci_read_config_byte(dev, pciU, ®U); } switch(speed) { - case XFER_UDMA_5: regU |= (unit ? 0x0A : 0x05); break; - case XFER_UDMA_4: regU |= (unit ? 0x4A : 0x15); break; - case XFER_UDMA_3: regU |= (unit ? 0x8A : 0x25); break; - case XFER_UDMA_2: regU |= (unit ? 0x42 : 0x11); break; - case XFER_UDMA_1: regU |= (unit ? 0x82 : 0x21); break; - case XFER_UDMA_0: regU |= (unit ? 0xC2 : 0x31); break; - case XFER_MW_DMA_2: regD |= (unit ? 0x40 : 0x10); break; - case XFER_MW_DMA_1: regD |= (unit ? 0x80 : 0x20); break; - case XFER_MW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break; - case XFER_SW_DMA_2: regD |= (unit ? 0x40 : 0x10); break; - case XFER_SW_DMA_1: regD |= (unit ? 0x80 : 0x20); break; - case XFER_SW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break; - case XFER_PIO_5: - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0); - break; - - default: - return 1; + case XFER_UDMA_5: + regU |= unit ? 0x0A : 0x05; + break; + case XFER_UDMA_4: + regU |= unit ? 0x4A : 0x15; + break; + case XFER_UDMA_3: + regU |= unit ? 0x8A : 0x25; + break; + case XFER_UDMA_2: + regU |= unit ? 0x42 : 0x11; + break; + case XFER_UDMA_1: + regU |= unit ? 0x82 : 0x21; + break; + case XFER_UDMA_0: + regU |= unit ? 0xC2 : 0x31; + break; + case XFER_MW_DMA_2: + program_cycle_times(drive, 120, 70); + break; + case XFER_MW_DMA_1: + program_cycle_times(drive, 150, 80); + break; + case XFER_MW_DMA_0: + program_cycle_times(drive, 480, 215); + break; + case XFER_PIO_5: + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0); + break; + default: + return 1; } - if (speed >= XFER_SW_DMA_0) { + if (speed >= XFER_SW_DMA_0) (void) pci_write_config_byte(dev, pciU, regU); - regD |= (unit ? 0x40 : 0x20); - (void) pci_write_config_byte(dev, pciD, regD); - } - return (ide_config_drive_speed(drive, speed)); + return ide_config_drive_speed(drive, speed); } static int config_chipset_for_dma (ide_drive_t *drive) @@ -457,67 +425,80 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive) return -1; } -static int cmd64x_alt_dma_status (struct pci_dev *dev) +static int cmd648_ide_dma_end (ide_drive_t *drive) { - switch(dev->device) { - case PCI_DEVICE_ID_CMD_648: - case PCI_DEVICE_ID_CMD_649: - return 1; - default: - break; - } - return 0; + ide_hwif_t *hwif = HWIF(drive); + int err = __ide_dma_end(drive); + u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : + MRDMODE_INTR_CH0; + u8 mrdmode = inb(hwif->dma_master + 0x01); + + /* clear the interrupt bit */ + outb(mrdmode | irq_mask, hwif->dma_master + 0x01); + + return err; } static int cmd64x_ide_dma_end (ide_drive_t *drive) { - u8 dma_stat = 0, dma_cmd = 0; ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; + int irq_reg = hwif->channel ? ARTTIM23 : CFR; + u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : + CFR_INTR_CH0; + u8 irq_stat = 0; + int err = __ide_dma_end(drive); - drive->waiting_for_dma = 0; - /* read DMA command state */ - dma_cmd = inb(hwif->dma_command); - /* stop DMA */ - outb(dma_cmd & ~1, hwif->dma_command); - /* get DMA status */ - dma_stat = inb(hwif->dma_status); - /* clear the INTR & ERROR bits */ - outb(dma_stat | 6, hwif->dma_status); - if (cmd64x_alt_dma_status(dev)) { - u8 dma_intr = 0; - u8 dma_mask = (hwif->channel) ? ARTTIM23_INTR_CH1 : - CFR_INTR_CH0; - u8 dma_reg = (hwif->channel) ? ARTTIM2 : CFR; - (void) pci_read_config_byte(dev, dma_reg, &dma_intr); - /* clear the INTR bit */ - (void) pci_write_config_byte(dev, dma_reg, dma_intr|dma_mask); - } - /* purge DMA mappings */ - ide_destroy_dmatable(drive); - /* verify good DMA status */ - return (dma_stat & 7) != 4; + (void) pci_read_config_byte(dev, irq_reg, &irq_stat); + /* clear the interrupt bit */ + (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask); + + return err; +} + +static int cmd648_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : + MRDMODE_INTR_CH0; + u8 dma_stat = inb(hwif->dma_status); + u8 mrdmode = inb(hwif->dma_master + 0x01); + +#ifdef DEBUG + printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n", + drive->name, dma_stat, mrdmode, irq_mask); +#endif + if (!(mrdmode & irq_mask)) + return 0; + + /* return 1 if INTR asserted */ + if (dma_stat & 4) + return 1; + + return 0; } static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 dma_alt_stat = 0, mask = (hwif->channel) ? MRDMODE_INTR_CH1 : - MRDMODE_INTR_CH0; - u8 dma_stat = inb(hwif->dma_status); + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int irq_reg = hwif->channel ? ARTTIM23 : CFR; + u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : + CFR_INTR_CH0; + u8 dma_stat = inb(hwif->dma_status); + u8 irq_stat = 0; + + (void) pci_read_config_byte(dev, irq_reg, &irq_stat); - (void) pci_read_config_byte(dev, MRDMODE, &dma_alt_stat); #ifdef DEBUG - printk("%s: dma_stat: 0x%02x dma_alt_stat: " - "0x%02x mask: 0x%02x\n", drive->name, - dma_stat, dma_alt_stat, mask); + printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n", + drive->name, dma_stat, irq_stat, irq_mask); #endif - if (!(dma_alt_stat & mask)) + if (!(irq_stat & irq_mask)) return 0; /* return 1 if INTR asserted */ - if ((dma_stat & 4) == 4) + if (dma_stat & 4) return 1; return 0; @@ -665,7 +646,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) hwif->ultra_mask = 0x3f; hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; if (dev->device == PCI_DEVICE_ID_CMD_643) hwif->ultra_mask = 0x80; @@ -678,17 +658,25 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) if (!(hwif->udma_four)) hwif->udma_four = ata66_cmd64x(hwif); - if (dev->device == PCI_DEVICE_ID_CMD_646) { + switch(dev->device) { + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + alt_irq_bits: + hwif->ide_dma_end = &cmd648_ide_dma_end; + hwif->ide_dma_test_irq = &cmd648_ide_dma_test_irq; + break; + case PCI_DEVICE_ID_CMD_646: hwif->chipset = ide_cmd646; if (class_rev == 0x01) { hwif->ide_dma_end = &cmd646_1_ide_dma_end; - } else { - hwif->ide_dma_end = &cmd64x_ide_dma_end; - hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; - } - } else { - hwif->ide_dma_end = &cmd64x_ide_dma_end; - hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; + break; + } else if (class_rev >= 0x03) + goto alt_irq_bits; + /* fall thru */ + default: + hwif->ide_dma_end = &cmd64x_ide_dma_end; + hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; + break; } @@ -698,42 +686,75 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) hwif->drives[1].autodma = hwif->autodma; } +static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d) +{ + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d) +{ + u8 rev = 0; + + /* + * The original PCI0646 didn't have the primary channel enable bit, + * it appeared starting with PCI0646U (i.e. revision ID 3). + */ + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + if (rev < 3) + d->enablebits[0].reg = 0; + + return ide_setup_pci_device(dev, d); +} + static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { { /* 0 */ .name = "CMD643", + .init_setup = init_setup_cmd64x, .init_chipset = init_chipset_cmd64x, .init_hwif = init_hwif_cmd64x, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, },{ /* 1 */ .name = "CMD646", + .init_setup = init_setup_cmd646, .init_chipset = init_chipset_cmd64x, .init_hwif = init_hwif_cmd64x, .channels = 2, .autodma = AUTODMA, - .enablebits = {{0x00,0x00,0x00}, {0x51,0x80,0x80}}, + .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, },{ /* 2 */ .name = "CMD648", + .init_setup = init_setup_cmd64x, .init_chipset = init_chipset_cmd64x, .init_hwif = init_hwif_cmd64x, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, },{ /* 3 */ .name = "CMD649", + .init_setup = init_setup_cmd64x, .init_chipset = init_chipset_cmd64x, .init_hwif = init_hwif_cmd64x, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, } }; +/* + * We may have to modify enablebits for PCI0646, so we'd better pass + * a local copy of the ide_pci_device_t structure down the call chain... + */ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &cmd64x_chipsets[id->driver_data]); + ide_pci_device_t d = cmd64x_chipsets[id->driver_data]; + + return d.init_setup(dev, &d); } static struct pci_device_id cmd64x_pci_tbl[] = { |