diff options
Diffstat (limited to 'drivers/ide/pci/cmd64x.c')
| -rw-r--r-- | drivers/ide/pci/cmd64x.c | 821 |
1 files changed, 821 insertions, 0 deletions
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c new file mode 100644 index 000000000000..3de9ab897e42 --- /dev/null +++ b/drivers/ide/pci/cmd64x.c @@ -0,0 +1,821 @@ +/* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16 + * + * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 + * + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Note, this driver is not used at all on other systems because + * there the "BIOS" has done all of the following already. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define DISPLAY_CMD64X_TIMINGS + +#define CMD_DEBUG 0 + +#if CMD_DEBUG +#define cmdprintk(x...) printk(x) +#else +#define cmdprintk(x...) +#endif + +/* + * CMD64x specific registers definition. + */ +#define CFR 0x50 +#define CFR_INTR_CH0 0x02 +#define CNTRL 0x51 +#define CNTRL_DIS_RA0 0x40 +#define CNTRL_DIS_RA1 0x80 +#define CNTRL_ENA_2ND 0x08 + +#define CMDTIM 0x52 +#define ARTTIM0 0x53 +#define DRWTIM0 0x54 +#define ARTTIM1 0x55 +#define DRWTIM1 0x56 +#define ARTTIM23 0x57 +#define ARTTIM23_DIS_RA2 0x04 +#define ARTTIM23_DIS_RA3 0x08 +#define ARTTIM23_INTR_CH1 0x10 +#define ARTTIM2 0x57 +#define ARTTIM3 0x57 +#define DRWTIM23 0x58 +#define DRWTIM2 0x58 +#define BRST 0x59 +#define DRWTIM3 0x5b + +#define BMIDECR0 0x70 +#define MRDMODE 0x71 +#define MRDMODE_INTR_CH0 0x04 +#define MRDMODE_INTR_CH1 0x08 +#define MRDMODE_BLK_CH0 0x10 +#define MRDMODE_BLK_CH1 0x20 +#define BMIDESR0 0x72 +#define UDIDETCR0 0x73 +#define DTPR0 0x74 +#define BMIDECR1 0x78 +#define BMIDECSR 0x79 +#define BMIDESR1 0x7A +#define UDIDETCR1 0x7B +#define DTPR1 0x7C + +#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) +#include <linux/stat.h> +#include <linux/proc_fs.h> + +static u8 cmd64x_proc = 0; + +#define CMD_MAX_DEVS 5 + +static struct pci_dev *cmd_devs[CMD_MAX_DEVS]; +static int n_cmd_devs; + +static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index) +{ + char *p = buf; + + u8 reg53 = 0, reg54 = 0, reg55 = 0, reg56 = 0; /* primary */ + u8 reg57 = 0, reg58 = 0, reg5b; /* secondary */ + u8 reg72 = 0, reg73 = 0; /* primary */ + u8 reg7a = 0, reg7b = 0; /* secondary */ + u8 reg50 = 0, reg71 = 0; /* extra */ + + p += sprintf(p, "\nController: %d\n", index); + p += sprintf(p, "CMD%x Chipset.\n", dev->device); + (void) pci_read_config_byte(dev, CFR, ®50); + (void) pci_read_config_byte(dev, ARTTIM0, ®53); + (void) pci_read_config_byte(dev, DRWTIM0, ®54); + (void) pci_read_config_byte(dev, ARTTIM1, ®55); + (void) pci_read_config_byte(dev, DRWTIM1, ®56); + (void) pci_read_config_byte(dev, ARTTIM2, ®57); + (void) pci_read_config_byte(dev, DRWTIM2, ®58); + (void) pci_read_config_byte(dev, DRWTIM3, ®5b); + (void) pci_read_config_byte(dev, MRDMODE, ®71); + (void) pci_read_config_byte(dev, BMIDESR0, ®72); + (void) pci_read_config_byte(dev, UDIDETCR0, ®73); + (void) pci_read_config_byte(dev, BMIDESR1, ®7a); + (void) pci_read_config_byte(dev, UDIDETCR1, ®7b); + + p += sprintf(p, "--------------- Primary Channel " + "---------------- Secondary Channel " + "-------------\n"); + p += sprintf(p, " %sabled " + " %sabled\n", + (reg72&0x80)?"dis":" en", + (reg7a&0x80)?"dis":" en"); + p += sprintf(p, "--------------- drive0 " + "--------- drive1 -------- drive0 " + "---------- drive1 ------\n"); + p += sprintf(p, "DMA enabled: %s %s" + " %s %s\n", + (reg72&0x20)?"yes":"no ", (reg72&0x40)?"yes":"no ", + (reg7a&0x20)?"yes":"no ", (reg7a&0x40)?"yes":"no "); + + p += sprintf(p, "DMA Mode: %s(%s) %s(%s)", + (reg72&0x20)?((reg73&0x01)?"UDMA":" DMA"):" PIO", + (reg72&0x20)?( + ((reg73&0x30)==0x30)?(((reg73&0x35)==0x35)?"3":"0"): + ((reg73&0x20)==0x20)?(((reg73&0x25)==0x25)?"3":"1"): + ((reg73&0x10)==0x10)?(((reg73&0x15)==0x15)?"4":"2"): + ((reg73&0x00)==0x00)?(((reg73&0x05)==0x05)?"5":"2"): + "X"):"?", + (reg72&0x40)?((reg73&0x02)?"UDMA":" DMA"):" PIO", + (reg72&0x40)?( + ((reg73&0xC0)==0xC0)?(((reg73&0xC5)==0xC5)?"3":"0"): + ((reg73&0x80)==0x80)?(((reg73&0x85)==0x85)?"3":"1"): + ((reg73&0x40)==0x40)?(((reg73&0x4A)==0x4A)?"4":"2"): + ((reg73&0x00)==0x00)?(((reg73&0x0A)==0x0A)?"5":"2"): + "X"):"?"); + p += sprintf(p, " %s(%s) %s(%s)\n", + (reg7a&0x20)?((reg7b&0x01)?"UDMA":" DMA"):" PIO", + (reg7a&0x20)?( + ((reg7b&0x30)==0x30)?(((reg7b&0x35)==0x35)?"3":"0"): + ((reg7b&0x20)==0x20)?(((reg7b&0x25)==0x25)?"3":"1"): + ((reg7b&0x10)==0x10)?(((reg7b&0x15)==0x15)?"4":"2"): + ((reg7b&0x00)==0x00)?(((reg7b&0x05)==0x05)?"5":"2"): + "X"):"?", + (reg7a&0x40)?((reg7b&0x02)?"UDMA":" DMA"):" PIO", + (reg7a&0x40)?( + ((reg7b&0xC0)==0xC0)?(((reg7b&0xC5)==0xC5)?"3":"0"): + ((reg7b&0x80)==0x80)?(((reg7b&0x85)==0x85)?"3":"1"): + ((reg7b&0x40)==0x40)?(((reg7b&0x4A)==0x4A)?"4":"2"): + ((reg7b&0x00)==0x00)?(((reg7b&0x0A)==0x0A)?"5":"2"): + "X"):"?" ); + p += sprintf(p, "PIO Mode: %s %s" + " %s %s\n", + "?", "?", "?", "?"); + p += sprintf(p, " %s %s\n", + (reg50 & CFR_INTR_CH0) ? "interrupting" : "polling ", + (reg57 & ARTTIM23_INTR_CH1) ? "interrupting" : "polling"); + p += sprintf(p, " %s %s\n", + (reg71 & MRDMODE_INTR_CH0) ? "pending" : "clear ", + (reg71 & MRDMODE_INTR_CH1) ? "pending" : "clear"); + p += sprintf(p, " %s %s\n", + (reg71 & MRDMODE_BLK_CH0) ? "blocked" : "enabled", + (reg71 & MRDMODE_BLK_CH1) ? "blocked" : "enabled"); + + return (char *)p; +} + +static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count) +{ + char *p = buffer; + int i; + + p += sprintf(p, "\n"); + for (i = 0; i < n_cmd_devs; i++) { + struct pci_dev *dev = cmd_devs[i]; + p = print_cmd64x_get_info(p, dev, i); + } + return p-buffer; /* => must be less than 4k! */ +} + +#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) */ + +/* + * Registers and masks for easy access by drive index: + */ +#if 0 +static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23}; +static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; +#endif + +/* + * This routine writes the prepared setup/active/recovery counts + * for a drive into the cmd646 chipset registers to active them. + */ +static void program_drive_counts (ide_drive_t *drive, int setup_count, int active_count, int recovery_count) +{ + unsigned long flags; + struct pci_dev *dev = HWIF(drive)->pci_dev; + ide_drive_t *drives = HWIF(drive)->drives; + u8 temp_b; + static const u8 setup_counts[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 recovery_counts[] = + {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; + static const u8 arttim_regs[2][2] = { + { ARTTIM0, ARTTIM1 }, + { ARTTIM23, ARTTIM23 } + }; + static const u8 drwtim_regs[2][2] = { + { DRWTIM0, DRWTIM1 }, + { DRWTIM2, DRWTIM3 } + }; + int channel = (int) HWIF(drive)->channel; + int slave = (drives != drive); /* Is this really the best way to determine this?? */ + + cmdprintk("program_drive_count parameters = s(%d),a(%d),r(%d),p(%d)\n", + setup_count, active_count, recovery_count, drive->present); + /* + * Set up address setup count registers. + * Primary interface has individual count/timing registers for + * each drive. Secondary interface has one common set of registers, + * for address setup so we merge these timings, using the slowest + * value. + */ + if (channel) { + drive->drive_data = setup_count; + setup_count = max(drives[0].drive_data, + drives[1].drive_data); + cmdprintk("Secondary interface, setup_count = %d\n", + setup_count); + } + + /* + * Convert values to internal chipset representation + */ + setup_count = (setup_count > 5) ? 0xc0 : (int) setup_counts[setup_count]; + active_count &= 0xf; /* Remember, max value is 16 */ + recovery_count = (int) recovery_counts[recovery_count]; + + cmdprintk("Final values = %d,%d,%d\n", + setup_count, active_count, recovery_count); + + /* + * Now that everything is ready, program the new timings + */ + local_irq_save(flags); + /* + * Program the address_setup clocks into ARTTIM reg, + * and then the active/recovery counts into the DRWTIM reg + */ + (void) pci_read_config_byte(dev, arttim_regs[channel][slave], &temp_b); + (void) pci_write_config_byte(dev, arttim_regs[channel][slave], + ((u8) setup_count) | (temp_b & 0x3f)); + (void) pci_write_config_byte(dev, drwtim_regs[channel][slave], + (u8) ((active_count << 4) | recovery_count)); + cmdprintk ("Write %x to %x\n", + ((u8) setup_count) | (temp_b & 0x3f), + arttim_regs[channel][slave]); + cmdprintk ("Write %x to %x\n", + (u8) ((active_count << 4) | recovery_count), + drwtim_regs[channel][slave]); + local_irq_restore(flags); +} + +/* + * Attempts to set the interface PIO mode. + * The preferred method of selecting PIO modes (e.g. mode 4) is + * "echo 'piomode:4' > /proc/ide/hdx/settings". Special cases are + * 8: prefetch off, 9: prefetch on, 255: auto-select best mode. + * Called with 255 at boot time. + */ + +static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted) +{ + int setup_time, active_time, recovery_time; + int clock_time, pio_mode, cycle_time; + u8 recovery_count2, cycle_count; + int setup_count, active_count, recovery_count; + int bus_speed = system_bus_clock(); + /*byte b;*/ + ide_pio_data_t d; + + switch (mode_wanted) { + case 8: /* set prefetch off */ + case 9: /* set prefetch on */ + mode_wanted &= 1; + /*set_prefetch_mode(index, mode_wanted);*/ + cmdprintk("%s: %sabled cmd640 prefetch\n", + drive->name, mode_wanted ? "en" : "dis"); + return; + } + + mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d); + pio_mode = d.pio_mode; + cycle_time = d.cycle_time; + + /* + * I copied all this complicated stuff from cmd640.c and made a few + * minor changes. For now I am just going to pray that it is correct. + */ + if (pio_mode > 5) + pio_mode = 5; + setup_time = ide_pio_timings[pio_mode].setup_time; + active_time = ide_pio_timings[pio_mode].active_time; + recovery_time = cycle_time - (setup_time + active_time); + clock_time = 1000 / bus_speed; + cycle_count = (cycle_time + clock_time - 1) / clock_time; + + setup_count = (setup_time + clock_time - 1) / clock_time; + + active_count = (active_time + clock_time - 1) / clock_time; + + recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count2 = cycle_count - (setup_count + active_count); + if (recovery_count2 > recovery_count) + recovery_count = recovery_count2; + if (recovery_count > 16) { + active_count += recovery_count - 16; + recovery_count = 16; + } + if (active_count > 16) + active_count = 16; /* maximum allowed by cmd646 */ + + /* + * In a perfect world, we might set the drive pio mode here + * (using WIN_SETFEATURE) before continuing. + * + * But we do not, because: + * 1) this is the wrong place to do it + * (proper is do_special() in ide.c) + * 2) in practice this is rarely, if ever, necessary + */ + program_drive_counts (drive, setup_count, active_count, recovery_count); + + cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, " + "clocks=%d/%d/%d\n", + drive->name, pio_mode, mode_wanted, cycle_time, + d.overridden ? " (overriding vendor mode)" : "", + setup_count, active_count, recovery_count); +} + +static u8 cmd64x_ratemask (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mode = 0; + + switch(dev->device) { + case PCI_DEVICE_ID_CMD_649: + mode = 3; + break; + case PCI_DEVICE_ID_CMD_648: + mode = 2; + break; + case PCI_DEVICE_ID_CMD_643: + return 0; + + case PCI_DEVICE_ID_CMD_646: + { + unsigned int class_rev = 0; + pci_read_config_dword(dev, + PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + /* + * UltraDMA only supported on PCI646U and PCI646U2, which + * correspond to revisions 0x03, 0x05 and 0x07 respectively. + * Actually, although the CMD tech support people won't + * tell me the details, the 0x03 revision cannot support + * UDMA correctly without hardware modifications, and even + * then it only works with Quantum disks due to some + * hold time assumptions in the 646U part which are fixed + * in the 646U2. + * + * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. + */ + switch(class_rev) { + case 0x07: + case 0x05: + return 1; + case 0x03: + case 0x01: + default: + return 0; + } + } + } + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, u8 set_speed) +{ + u8 speed = 0x00; + u8 set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL); + + cmd64x_tuneproc(drive, set_pio); + speed = XFER_PIO_0 + set_pio; + if (set_speed) + (void) ide_config_drive_speed(drive, speed); +} + +static void config_chipset_for_pio (ide_drive_t *drive, u8 set_speed) +{ + config_cmd64x_chipset_for_pio(drive, set_speed); +} + +static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + u8 unit = (drive->select.b.unit & 0x01); + u8 regU = 0, pciU = (hwif->channel) ? UDIDETCR1 : UDIDETCR0; + u8 regD = 0, pciD = (hwif->channel) ? BMIDESR1 : BMIDESR0; + + u8 speed = ide_rate_filter(cmd64x_ratemask(drive), xferspeed); + + if (speed > XFER_PIO_4) { + (void) pci_read_config_byte(dev, pciD, ®D); + (void) pci_read_config_byte(dev, pciU, ®U); + regD &= ~(unit ? 0x40 : 0x20); + regU &= ~(unit ? 0xCA : 0x35); + (void) pci_write_config_byte(dev, pciD, regD); + (void) pci_write_config_byte(dev, pciU, regU); + (void) pci_read_config_byte(dev, pciD, ®D); + (void) pci_read_config_byte(dev, pciU, ®U); + } + + switch(speed) { + case XFER_UDMA_5: regU |= (unit ? 0x0A : 0x05); break; + case XFER_UDMA_4: regU |= (unit ? 0x4A : 0x15); break; + case XFER_UDMA_3: regU |= (unit ? 0x8A : 0x25); break; + case XFER_UDMA_2: regU |= (unit ? 0x42 : 0x11); break; + case XFER_UDMA_1: regU |= (unit ? 0x82 : 0x21); break; + case XFER_UDMA_0: regU |= (unit ? 0xC2 : 0x31); break; + case XFER_MW_DMA_2: regD |= (unit ? 0x40 : 0x10); break; + case XFER_MW_DMA_1: regD |= (unit ? 0x80 : 0x20); break; + case XFER_MW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break; + case XFER_SW_DMA_2: regD |= (unit ? 0x40 : 0x10); break; + case XFER_SW_DMA_1: regD |= (unit ? 0x80 : 0x20); break; + case XFER_SW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break; + case XFER_PIO_4: cmd64x_tuneproc(drive, 4); break; + case XFER_PIO_3: cmd64x_tuneproc(drive, 3); break; + case XFER_PIO_2: cmd64x_tuneproc(drive, 2); break; + case XFER_PIO_1: cmd64x_tuneproc(drive, 1); break; + case XFER_PIO_0: cmd64x_tuneproc(drive, 0); break; + + default: + return 1; + } + + if (speed > XFER_PIO_4) { + (void) pci_write_config_byte(dev, pciU, regU); + regD |= (unit ? 0x40 : 0x20); + (void) pci_write_config_byte(dev, pciD, regD); + } + + return (ide_config_drive_speed(drive, speed)); +} + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive)); + + config_chipset_for_pio(drive, !speed); + + if (!speed) + return 0; + + if(ide_set_xfer_rate(drive, speed)) + return 0; + + if (!drive->init_speed) + drive->init_speed = speed; + + return ide_dma_enable(drive); +} + +static int cmd64x_config_drive_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) { + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + config_chipset_for_pio(drive, 1); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static int cmd64x_alt_dma_status (struct pci_dev *dev) +{ + switch(dev->device) { + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + return 1; + default: + break; + } + return 0; +} + +static int cmd64x_ide_dma_end (ide_drive_t *drive) +{ + u8 dma_stat = 0, dma_cmd = 0; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + + drive->waiting_for_dma = 0; + /* read DMA command state */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB((dma_cmd & ~1), hwif->dma_command); + /* get DMA status */ + dma_stat = hwif->INB(hwif->dma_status); + /* clear the INTR & ERROR bits */ + hwif->OUTB(dma_stat|6, hwif->dma_status); + if (cmd64x_alt_dma_status(dev)) { + u8 dma_intr = 0; + u8 dma_mask = (hwif->channel) ? ARTTIM23_INTR_CH1 : + CFR_INTR_CH0; + u8 dma_reg = (hwif->channel) ? ARTTIM2 : CFR; + (void) pci_read_config_byte(dev, dma_reg, &dma_intr); + /* clear the INTR bit */ + (void) pci_write_config_byte(dev, dma_reg, dma_intr|dma_mask); + } + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + return (dma_stat & 7) != 4; +} + +static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 dma_alt_stat = 0, mask = (hwif->channel) ? MRDMODE_INTR_CH1 : + MRDMODE_INTR_CH0; + u8 dma_stat = hwif->INB(hwif->dma_status); + + (void) pci_read_config_byte(dev, MRDMODE, &dma_alt_stat); +#ifdef DEBUG + printk("%s: dma_stat: 0x%02x dma_alt_stat: " + "0x%02x mask: 0x%02x\n", drive->name, + dma_stat, dma_alt_stat, mask); +#endif + if (!(dma_alt_stat & mask)) + return 0; + + /* return 1 if INTR asserted */ + if ((dma_stat & 4) == 4) + return 1; + + return 0; +} + +/* + * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old + * event order for DMA transfers. + */ + +static int cmd646_1_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = 0, dma_cmd = 0; + + drive->waiting_for_dma = 0; + /* get DMA status */ + dma_stat = hwif->INB(hwif->dma_status); + /* read DMA command state */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB((dma_cmd & ~1), hwif->dma_command); + /* clear the INTR & ERROR bits */ + hwif->OUTB(dma_stat|6, hwif->dma_status); + /* and free any DMA resources */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + return (dma_stat & 7) != 4; +} + +static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name) +{ + u32 class_rev = 0; + u8 mrdmode = 0; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + +#ifdef __i386__ + if (dev->resource[PCI_ROM_RESOURCE].start) { + pci_write_config_byte(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); + } +#endif + + switch(dev->device) { + case PCI_DEVICE_ID_CMD_643: + break; + case PCI_DEVICE_ID_CMD_646: + printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev); + switch(class_rev) { + case 0x07: + case 0x05: + printk("UltraDMA Capable"); + break; + case 0x03: + printk("MultiWord DMA Force Limited"); + break; + case 0x01: + default: + printk("MultiWord DMA Limited, IRQ workaround enabled"); + break; + } + printk("\n"); + break; + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + break; + default: + break; + } + + /* Set a good latency timer and cache line size value. */ + (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); + /* FIXME: pci_set_master() to ensure a good latency timer value */ + + /* Setup interrupts. */ + (void) pci_read_config_byte(dev, MRDMODE, &mrdmode); + mrdmode &= ~(0x30); + (void) pci_write_config_byte(dev, MRDMODE, mrdmode); + + /* Use MEMORY READ LINE for reads. + * NOTE: Although not mentioned in the PCI0646U specs, + * these bits are write only and won't be read + * back as set or not. The PCI0646U2 specs clarify + * this point. + */ + (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02); + + /* Set reasonable active/recovery/address-setup values. */ + (void) pci_write_config_byte(dev, ARTTIM0, 0x40); + (void) pci_write_config_byte(dev, DRWTIM0, 0x3f); + (void) pci_write_config_byte(dev, ARTTIM1, 0x40); + (void) pci_write_config_byte(dev, DRWTIM1, 0x3f); +#ifdef __i386__ + (void) pci_write_config_byte(dev, ARTTIM23, 0x1c); +#else + (void) pci_write_config_byte(dev, ARTTIM23, 0x5c); +#endif + (void) pci_write_config_byte(dev, DRWTIM23, 0x3f); + (void) pci_write_config_byte(dev, DRWTIM3, 0x3f); +#ifdef CONFIG_PPC + (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); +#endif /* CONFIG_PPC */ + +#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) + + cmd_devs[n_cmd_devs++] = dev; + + if (!cmd64x_proc) { + cmd64x_proc = 1; + ide_pci_create_host_proc("cmd64x", cmd64x_get_info); + } +#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */ + + return 0; +} + +static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif) +{ + u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01; + + switch(hwif->pci_dev->device) { + case PCI_DEVICE_ID_CMD_643: + case PCI_DEVICE_ID_CMD_646: + return ata66; + default: + break; + } + pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66); + return (ata66 & mask) ? 1 : 0; +} + +static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + unsigned int class_rev; + + hwif->autodma = 0; + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + class_rev &= 0xff; + + hwif->tuneproc = &cmd64x_tuneproc; + hwif->speedproc = &cmd64x_tune_chipset; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + + hwif->ultra_mask = 0x3f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (dev->device == PCI_DEVICE_ID_CMD_643) + hwif->ultra_mask = 0x80; + if (dev->device == PCI_DEVICE_ID_CMD_646) + hwif->ultra_mask = (class_rev > 0x04) ? 0x07 : 0x80; + if (dev->device == PCI_DEVICE_ID_CMD_648) + hwif->ultra_mask = 0x1f; + + hwif->ide_dma_check = &cmd64x_config_drive_for_dma; + if (!(hwif->udma_four)) + hwif->udma_four = ata66_cmd64x(hwif); + + if (dev->device == PCI_DEVICE_ID_CMD_646) { + hwif->chipset = ide_cmd646; + if (class_rev == 0x01) { + hwif->ide_dma_end = &cmd646_1_ide_dma_end; + } else { + hwif->ide_dma_end = &cmd64x_ide_dma_end; + hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; + } + } else { + hwif->ide_dma_end = &cmd64x_ide_dma_end; + hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; + } + + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { + { /* 0 */ + .name = "CMD643", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 1 */ + .name = "CMD646", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x51,0x80,0x80}}, + .bootable = ON_BOARD, + },{ /* 2 */ + .name = "CMD648", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + },{ /* 3 */ + .name = "CMD649", + .init_chipset = init_chipset_cmd64x, + .init_hwif = init_hwif_cmd64x, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, + } +}; + +static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &cmd64x_chipsets[id->driver_data]); +} + +static struct pci_device_id cmd64x_pci_tbl[] = { + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl); + +static struct pci_driver driver = { + .name = "CMD64x_IDE", + .id_table = cmd64x_pci_tbl, + .probe = cmd64x_init_one, +}; + +static int cmd64x_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cmd64x_ide_init); + +MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); +MODULE_LICENSE("GPL"); |